summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* USB: regroup all depends on USB within an if USB blockFlorian Fainelli2013-04-0914-74/+36
| | | | | | | | | | | | This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: add a D-Link DWM-156 variantBjørn Mork2013-04-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ehci-s5p: fix: Fix null pointer dereferencingVivek Gautam2013-04-091-1/+1
| | | | | | | | | | | | | | | | | | 7edb3da: (USB: EHCI: make ehci-s5p a separate driver) raised an issue with ehci-s5p's driver data. Now that 's5p_ehci_hcd' doesn't maintain pointer to 'usb_hcd' and s5p_ehci is nothing but a pointer to hcd->priv; add hcd to the driver data rather than s5p_ehci. This fixes issues with null pointer dereferencing in s5p_ehci_shutdown(), s5p_ehci_suspend(), s5p_ehci_resume(). Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> CC: Manjunath Goudar <manjunath.goudar@linaro.org> CC: Arnd Bergmann <arnd@arndb.de> CC: Jingoo Han <jg1.han@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-usb-next-2012-04-08' of ↵Greg Kroah-Hartman2013-04-083-15/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-next Sarah writes: xHCI misc cleanup patches for 3.10 Hi Greg, Here's three cleanup patches for 3.10. Nothing big here, just some debugging output changes, a macro rename, and a math macro change that should have no behavioral effects. Tested on the Intel Panther Point xHCI host, with USB storage and mouse, with xHCI debugging turned on. I don't have the TI host that causes the debugging output changes to trigger. Sarah Sharp
| * xhci - clarify compliance mode debug messagesTony Camuso2013-04-081-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are no functional changes in this patch. However, because the compliance mode timer can be deleted in more than one function, it seemed expedient to include the function name in the debug strings. Also limited the use of capitals to the first word in the compliance mode debug messages, except after a function name where all words start with lower case, in keeping with the style prevalent elsewhere in xhci.c. Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * xhci: Rename SEGMENT_SIZE and SEGMENT_SHIFT as the former is used in a.out.hDavid Howells2013-04-032-10/+10
| | | | | | | | | | | | | | | | | | | | Rename SEGMENT_SIZE and SEGMENT_SHIFT as the former is used in a.out.h. Signed-off-by: David Howells <dhowells@redhat.com> cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-usb@vger.kernel.org Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * xhci: Use ilog2() rather than __ffs() for calculating SEGMENT_SHIFTDavid Howells2013-04-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | Use ilog2() rather than __ffs() for calculating SEGMENT_SHIFT as ilog2() can be worked out at compile time, whereas __ffs() must be calculated at runtime. Signed-off-by: David Howells <dhowells@redhat.com> cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-usb@vger.kernel.org Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | USB: EHCI: make ehci-msm a separate driverManjunath Goudar2013-04-084-54/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Qualcomm QSD/MSM on-chip host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Qualcomm QSD/MSM can be booted with a multi-platform kernel, which is not expected before 3.11. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the msm bus glue. In V5 (arnd): - add FIXME about missing usb_add_hcd() or usb_remove_hcd() calls In V3: - Detailed commit message added here describing why this patch is required. - Arranged #include's in alphabetical order. - driver.name initialized hcd_name[] = "ehci-msm" in platform_driver structure initialization instead of "msm-ehci", which was the reason why it broke in EHCI USB testing In V2: Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: make ehci-atmel a separate driverManjunath Goudar2013-04-084-52/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Atmel host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before Atmel can be booted with a multi-platform kernel. This is currently planned for Linux-3.11. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the Atmel bus glue. In V4 (arnd): - reordered #include statements. - removed call to ehci_shutdown and the corresponding export In V3: - Detailed commit message added here about why this patch is required. - Replaced hcd_name string "ehci-atmel" to "atmel-ehci". - Inserted blank line in the Makefile to separate the EHCI drivers from the following non-EHCI drivers. - Exported ehci_shutdown symbol as it is needed by the Atmel driver. - Eliminated ehci_atmel_setup routine because hcd registers can be directly set in the ehci_atmel_drv_probe function. In V2: Resolved below compiler error. drivers/usb/host/ehci-atmel.c: In function 'ehci_atmel_drv_remove': drivers/usb/host/ehci-atmel.c:167: error: implicit declaration of function 'ehci_shutdown' Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: make ehci-s5p a separate driverManjunath Goudar2013-04-084-91/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Samsung S5P/EXYNOS host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before S5P/EXYNOS can be booted with a multi-platform kernel. We currently expect those to get merged for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the s5p bus glue. In V4 (arnd) - revert some of the pointless changes. - fix allocation of s5p specific data structure. In V3: - Detailed commit message added here, why this patch is required. - MODULE_LICENSE is GPL v2. - Added .extra_priv_size to eliminate the separate allocation of the s5p_ehci_hcd structure and removed .reset function pointer initialization. - Arranged #include's in alphabetical order. - After using extra_priv_size initialization, struct usb_hcd *hcd is redundant and can be removed from the probe function. - Eliminated s5p_ehci_phy_enable,contents of statements moved into the s5p_ehci_probe - Eliminated s5p_ehci_phy_disable, contents of statements moved into the s5p_ehci_remove. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: make ehci-spear a separate driverManjunath Goudar2013-04-084-69/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the SPEAr host controller driver from ehci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM; however, note that other changes are still needed before SPEAr can be booted with a multi-platform kernel, but they are queued in the arm-soc tree for 3.10. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the SPEAr bus glue. In V4 (arnd): - renamed all 'struct spear_ehci' pointers from 'ehci' to the less ambiguous 'sehci'. - folded trivial spear_start_ehci/spear_stop_ehci functions into callers. - brought back initialization of ehci->caps. In V3: - Detailed commit message added here about why this patch is required. - Eliminated ehci_spear_setup routine because hcd registers can be directly set in the spear_ehci_hcd_drv_probe function. - spear_overrides struct initialized. - Converted to using .extra_priv_size for allocating spear_ehci, and updated all users of that structure. - to_spear_ehci() macro modified for spear_ehci. In V2: - Replaced spear as SPEAr everywhere, leaving functions/variables/config options. Signed-off-by: Deepak Saxena <dsaxena@linaro.org> Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.linux@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: EHCI: make ehci-orion a separate driverManjunath Goudar2013-04-084-53/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separate the Orion host controller driver from ehci-hcd host code into its own driver module because of following reason. With the multiplatform changes in arm-soc tree, it becomes possible to enable the mvebu platform (which uses ehci-orion) at the same time as other platforms that require a conflicting EHCI bus glue. At the moment, this results in a warning like drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default] drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable] and an ehci driver that only works on one of them. With the infrastructure added by Alan Stern in patch 3e0232039 "USB: EHCI: prepare to make ehci-hcd a library module", we can avoid this problem by turning a bus glue into a separate module, as we do here for the orion bus glue. An earlier version of this patch was included in 3.9 but caused a regression there, which has subsequently been fixed. While we are here, use the opportunity to disabiguate the two Marvell EHCI controller implementations in Kconfig. In V4 (arnd): - Improve Kconfig text In V3: - More detail provided in commit message regarding this patch. - Replaced hcd_name string "ehci-orion" into "orion-ehci". - MODULE_LICENSE is GPL v2. - In ehci_init_driver calling second argument passed as NULL instead of ehci_orion_overrides because ehci_orion_overrides is removed. In V2: - Tegra patch related changes removed from this patch. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: add ftdi_sio USB ID for GDM Boost V1.xStefani Seibold2013-04-082-0/+2
| | | | | | | | | | | | | | | | | | | | This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <stefani@seibold.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb, gadget: use appropriate warning accessorsDavid Rientjes2013-04-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the appropriate WARN() and WARN_ON() accessors to avoid a build error when CONFIG_BUG=n: drivers/usb/gadget/configfs.c: In function 'config_usb_cfg_unlink': drivers/usb/gadget/configfs.c:442:2: error: implicit declaration of function '__WARN_printf' drivers/usb/gadget/configfs.c: In function 'configfs_do_nothing': drivers/usb/gadget/configfs.c:733:2: error: implicit declaration of function '__WARN' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: fix an incorrect table index in commentHuang Rui2013-04-081-2/+2
| | | | | | | | | | Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 3.9-rc6 into usb-nextGreg Kroah-Hartman2013-04-08268-1504/+2525
|\ \ | | | | | | | | | | | | | | | We want the fixes here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Linux 3.9-rc6v3.9-rc6Linus Torvalds2013-04-071-1/+1
| | |
| * | Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2013-04-075-19/+46
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull KVM fix from Gleb Natapov: "Bugfix for the regression introduced by commit c300aa64ddf5" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Allow cross page reads and writes from cached translations.
| | * | KVM: Allow cross page reads and writes from cached translations.Andrew Honig2013-04-075-19/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for kvm_gfn_to_hva_cache_init functions for reads and writes that will cross a page. If the range falls within the same memslot, then this will be a fast operation. If the range is split between two memslots, then the slower kvm_read_guest and kvm_write_guest are used. Tested: Test against kvm_clock unit tests. Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
| * | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2013-04-072-5/+4
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "Two quite small fixes: one a build problem, and the other fixes seccomp filters on x32." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix rebuild with EFI_STUB enabled x86: remove the x32 syscall bitmask from syscall_get_nr()
| | * | | x86: Fix rebuild with EFI_STUB enabledJan Beulich2013-04-051-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence their .cmd files don't get included by the build machinery, leading to the files always getting rebuilt. Rather than adding the two files individually, take the opportunity and add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment at the top of the file to be shrunk quite a bit. At the same time, remove a pointless flags override line - the variable assigned to was misspelled anyway, and the options added are meaningless for assembly sources. [ hpa: the patch is not minimal, but I am taking it for -urgent anyway since the excess impact of the patch seems to be small enough. ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com Cc: Matthew Garrett <mjg@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
| | * | | x86: remove the x32 syscall bitmask from syscall_get_nr()Paul Moore2013-04-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fca460f95e928bae373daa8295877b6905bc62b8 simplified the x32 implementation by creating a syscall bitmask, equal to 0x40000000, that could be applied to x32 syscalls such that the masked syscall number would be the same as a x86_64 syscall. While that patch was a nice way to simplify the code, it went a bit too far by adding the mask to syscall_get_nr(); returning the masked syscall numbers can cause confusion with callers that expect syscall numbers matching the x32 ABI, e.g. unmasked syscall numbers. This patch fixes this by simply removing the mask from syscall_get_nr() while preserving the other changes from the original commit. While there are several syscall_get_nr() callers in the kernel, most simply check that the syscall number is greater than zero, in this case this patch will have no effect. Of those remaining callers, they appear to be few, seccomp and ftrace, and from my testing of seccomp without this patch the original commit definitely breaks things; the seccomp filter does not correctly filter the syscalls due to the difference in syscall numbers in the BPF filter and the value from syscall_get_nr(). Applying this patch restores the seccomp BPF filter functionality on x32. I've tested this patch with the seccomp BPF filters as well as ftrace and everything looks reasonable to me; needless to say general usage seemed fine as well. Signed-off-by: Paul Moore <pmoore@redhat.com> Link: http://lkml.kernel.org/r/20130215172143.12549.10292.stgit@localhost Cc: <stable@vger.kernel.org> Cc: Will Drewry <wad@chromium.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
| * | | | alpha: irq: remove deprecated use of IRQF_DISABLEDWill Deacon2013-04-073-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interrupt handlers are always invoked with interrupts disabled, so remove all uses of the deprecated IRQF_DISABLED flag. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | alpha: irq: run all handlers with interrupts disabledWill Deacon2013-04-072-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux has expected that interrupt handlers are executed with local interrupts disabled for a while now, so ensure that this is the case on Alpha even for non-device interrupts such as IPIs. Without this patch, secondary boot results in the following backtrace: warning: at kernel/softirq.c:139 __local_bh_enable+0xb8/0xd0() trace: __local_bh_enable+0xb8/0xd0 irq_enter+0x74/0xa0 scheduler_ipi+0x50/0x100 handle_ipi+0x84/0x260 do_entint+0x1ac/0x2e0 irq_exit+0x60/0xa0 handle_irq+0x98/0x100 do_entint+0x2c8/0x2e0 ret_from_sys_call+0x0/0x10 load_balance+0x3e4/0x870 cpu_idle+0x24/0x80 rcu_eqs_enter_common.isra.38+0x0/0x120 cpu_idle+0x40/0x80 rest_init+0xc0/0xe0 _stext+0x1c/0x20 A similar dump occurs if you try to reboot using magic-sysrq. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Reviewed-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | alpha: makefile: don't enforce small data model for kernel buildsWill Deacon2013-04-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to all of the goodness being packed into today's kernels, the resulting image isn't as slim as it once was. In light of this, don't pass -msmall-data to gcc, which otherwise results in link failures due to impossible relocations when compiling anything but the most trivial configurations. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Matt Turner <mattst88@gmail.com> Tested-by: Thorsten Kranzkowski <dl8bcu@dl8bcu.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | alpha: Add irongate_io to PCI bus resourcesJay Estabrook2013-04-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes a NULL pointer dereference at boot on UP1500. Cc: stable@vger.kernel.org Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | Merge tag 'dm-3.9-fixes-2' of ↵Linus Torvalds2013-04-051-13/+38
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper fixes from Alasdair Kergon: "A pair of patches to fix the writethrough mode of the device-mapper cache target when the device being cached is not itself wrapped with device-mapper." * tag 'dm-3.9-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm cache: reduce bio front_pad size in writeback mode dm cache: fix writes to cache device in writethrough mode
| | * | | | dm cache: reduce bio front_pad size in writeback modeMike Snitzer2013-04-051-13/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent patch to fix the dm cache target's writethrough mode extended the bio's front_pad to include a 1056-byte struct dm_bio_details. Writeback mode doesn't need this, so this patch reduces the per_bio_data_size to 16 bytes in this case instead of 1096. The dm_bio_details structure was added in "dm cache: fix writes to cache device in writethrough mode" which fixed commit e2e74d617e ("dm cache: fix race in writethrough implementation"). In writeback mode we avoid allocating the writethrough-specific members of the per_bio_data structure (the dm_bio_details structure included). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | | | dm cache: fix writes to cache device in writethrough modeDarrick J. Wong2013-04-051-0/+4
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dm-cache writethrough strategy introduced by commit e2e74d617eadc15 ("dm cache: fix race in writethrough implementation") issues a bio to the origin device, remaps and then issues the bio to the cache device. This more conservative in-series approach was selected to favor correctness over performance (of the previous parallel writethrough). However, this in-series implementation that reuses the same bio to write both the origin and cache device didn't take into account that the block layer's req_bio_endio() modifies a completing bio's bi_sector and bi_size. So the new writethrough strategy needs to preserve these bio fields, and restore them before submission to the cache device, otherwise nothing gets written to the cache (because bi_size is 0). This patch adds a struct dm_bio_details field to struct per_bio_data, and uses dm_bio_record() and dm_bio_restore() to ensure the bio is restored before reissuing to the cache device. Adding such a large structure to the per_bio_data is not ideal but we can improve this later, for now correctness is the important thing. This problem initially went unnoticed because the dm-cache test-suite uses a linear DM device for the dm-cache device's origin device. Writethrough worked as expected because DM submits a *clone* of the original bio, so the original bio which was reused for the cache was never touched. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * | | | Merge tag 'pci-v3.9-fixes-1' of ↵Linus Torvalds2013-04-059-118/+169
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "PCI updates for v3.9: ASPM Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" kexec PCI: Don't try to disable Bus Master on disconnected PCI devices Platform ROM images PCI: Add PCI ROM helper for platform-provided ROM images nouveau: Attempt to use platform-provided ROM image radeon: Attempt to use platform-provided ROM image Hotplug PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI/PM: Disable runtime PM of PCIe ports EISA EISA/PCI: Fix bus res reference EISA/PCI: Init EISA early, before PNP" * tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Disable runtime PM of PCIe ports PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI: Don't try to disable Bus Master on disconnected PCI devices Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" radeon: Attempt to use platform-provided ROM image nouveau: Attempt to use platform-provided ROM image EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference PCI: Add PCI ROM helper for platform-provided ROM images
| | * | | | PCI/PM: Disable runtime PM of PCIe portsRafael J. Wysocki2013-04-031-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The runtime PM of PCIe ports turns out to be quite fragile, as in some cases things work while in some other cases they don't and we don't seem to have a good way to determine whether or not they are going to work in advance. For this reason, avoid enabling runtime PM for PCIe ports by keeping their runtime PM reference counters always above 0 for the time being. When a PCIe port is suspended, it can no longer report events like hotplug, so hotplug below the port may not work, as in the bug report below. [bhelgaas: changelog, stable] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.6+
| | * | | | PCI/ACPI: Always resume devices on ACPI wakeup notificationsRafael J. Wysocki2013-04-031-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that the _Lxx control methods provided by some BIOSes clear the PME Status bit of PCI devices they handle, which means that pci_acpi_wake_dev() cannot really use that bit to check whether or not the device has signalled wakeup. One symptom of the problem is, for example, that when an affected PCI USB controller is runtime-suspended, then plugging in a new USB device into one of the controller's ports will not wake up the controller, which should happen. For this reason, make pci_acpi_wake_dev() always attempt to resume the device it is called for regardless of the device's PME Status bit value (that bit still has to be cleared if set at this point, though). Reported-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> CC: stable@vger.kernel.org # v3.7+
| | * | | | PCI: Don't try to disable Bus Master on disconnected PCI devicesKonstantin Khlebnikov2013-04-021-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a fix for commit 7897e60227 ("PCI: Disable Bus Master unconditionally in pci_device_shutdown()"). Vivek reported that with this commit, kexec failed because none of his SATA disks came up. A ->shutdown() callback might put the device in D3cold, which means config space is no longer available. [bhelgaas: changelog] Link: https://lkml.org/lkml/2013/3/12/529 Reported-and-Tested-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | | | Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"Bjorn Helgaas2013-04-021-39/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6. Conflicts: drivers/acpi/pci_root.c This commit broke some pre-1.1 PCIe devices by leaving them with ASPM enabled. Previously, we had disabled ASPM on these devices because many of them don't implement it correctly (per 149e1637). Requesting _OSC control early means that aspm_disabled may be set before we scan the PCI bus and configure link ASPM state. But the ASPM configuration currently skips the check for pre-PCIe 1.1 devices when aspm_disabled is set, like this: acpi_pci_root_add acpi_pci_osc_support if (flags != base_flags) pcie_no_aspm aspm_disabled = 1 pci_acpi_scan_root ... pcie_aspm_init_link_state pcie_aspm_sanity_check if (!aspm_disabled) /* check for pre-PCIe 1.1 device */ Therefore, setting aspm_disabled early means that we leave ASPM enabled on these pre-PCIe 1.1 devices, which is a regression for some devices. The best fix would be to clean up the ASPM init so we can evaluate _OSC before scanning the bug (that way boot-time and hot-add discovery will work the same), but that requires significant rework. For now, we'll just revert the _OSC change as the lowest-risk fix. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=55211 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: stable@vger.kernel.org # v3.8+
| | * | | | Merge branch 'pci/yinghai-eisa' into for-linusBjorn Helgaas2013-04-021-21/+46
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/yinghai-eisa: EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference
| | | * | | | EISA/PCI: Init EISA early, before PNPYinghai Lu2013-04-011-18/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Matthew reported kernels fail the pci_eisa probe and are later successful with the virtual_eisa_root_init force probe without slot0. The reason for that is: PNP probing is before pci_eisa_init gets called as pci_eisa_init is called via pci_driver. pnp 00:0f has 0xc80 - 0xc84 reserved. [ 9.700409] pnp 00:0f: [io 0x0c80-0x0c84] so eisa_probe will fail from pci_eisa_init ==>eisa_root_register ==>eisa_probe path. as force_probe is not set in pci_eisa_root, it will bail early when slot0 is not probed and initialized. Try to use subsys_initcall_sync instead, and will keep following sequence: pci_subsys_init pci_eisa_init_early pnpacpi_init/isapnp_init After this patch EISA can be initialized properly, and PNP overlapping resource will not be reserved. [ 10.104434] system 00:0f: [io 0x0c80-0x0c84] could not be reserved Reported-by: Matthew Whitehead <mwhitehe@redhat.com> Tested-by: Matthew Whitehead <mwhitehe@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
| | | * | | | EISA/PCI: Fix bus res referenceYinghai Lu2013-04-011-3/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Matthew found that 3.8.3 is having problems with an old (ancient) PCI-to-EISA bridge, the Intel 82375. It worked with the 3.2 kernel. He identified the 82375, but doesn't assign the struct resource *res pointer inside the struct eisa_root_device, and panics. pci_eisa_init() was using bus->resource[] directly instead of pci_bus_resource_n(). The bus->resource[] array is a PCI-internal implementation detail, and after commit 45ca9e97 (PCI: add helpers for building PCI bus resource lists) and commit 0efd5aab (PCI: add struct pci_host_bridge_window with CPU/bus address offset), bus->resource[] is not used for PCI root buses any more. The 82375 is a subtractive-decode PCI device, so handle it the same way we handle PCI-PCI bridges in subtractive-decode mode in pci_read_bridge_bases(). [bhelgaas: changelog] Reported-by: Matthew Whitehead <mwhitehe@redhat.com> Tested-by: Matthew Whitehead <mwhitehe@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.3+
| | * | | | | Merge branch 'pci/mjg-rom' into for-linusBjorn Helgaas2013-04-014-36/+75
| | |\ \ \ \ \ | | | |/ / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/mjg-rom: radeon: Attempt to use platform-provided ROM image nouveau: Attempt to use platform-provided ROM image PCI: Add PCI ROM helper for platform-provided ROM images
| | | * | | | radeon: Attempt to use platform-provided ROM imageMatthew Garrett2013-04-011-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some platforms only provide their PCI ROM via a platform-specific interface. Fall back to attempting that if all other sources fail. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | | * | | | nouveau: Attempt to use platform-provided ROM imageMatthew Garrett2013-04-011-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some platforms only provide their PCI ROM via a platform-specific interface. Fall back to attempting that if all other sources fail. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| | | * | | | PCI: Add PCI ROM helper for platform-provided ROM imagesMatthew Garrett2013-03-262-36/+32
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that some UEFI systems provide apparently an apparently valid PCI ROM BAR that turns out to contain garbage, so the attempt in 547b52463 to prefer the ROM from the BAR actually breaks a different set of machines. As Linus pointed out, the graphics drivers are probably in the best position to make this judgement, so this basically reverts 547b52463 and f9a37be0f and adds a new helper function. Followup patches will add support to nouveau and radeon for probing this ROM source if they can't find a ROM from some other source. [bhelgaas: added reporter and bugzilla pointers, s/f4eb5ff05/547b52463] Reference: https://bugzilla.redhat.com/show_bug.cgi?id=927451 Reference: http://lkml.kernel.org/r/kg69ef$vdb$1@ger.gmane.org Reported-by: Mantas Mikulėnas <grawity@gmail.com> Reported-by: Chris Murphy <bugzilla@colorremedies.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2013-04-0526-75/+133
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix erroneous sock_orphan() leading to crashes and double kfree_skb() in NFC protocol. From Thierry Escande and Samuel Ortiz. 2) Fix use after free in remain-on-channel mac80211 code, from Johannes Berg. 3) nf_reset() needs to reset the NF tracing cookie, otherwise we can leak it from one namespace into another. Fix from Gao Feng and Patrick McHardy. 4) Fix overflow in channel scanning array of mwifiex driver, from Stone Piao. 5) Fix loss of link after suspend/shutdown in r8169, from Hayes Wang. 6) Synchronization of unicast address lists to the undelying device doesn't work because whether to sync is maintained as a boolean rather than a true count. Fix from Vlad Yasevich. 7) Fix corruption of TSO packets in atl1e by limiting the segmented packet length. From Hannes Frederic Sowa. 8) Revert bogus AF_UNIX credential passing change and fix the coalescing issue properly, from Eric W Biederman. 9) Changes of ipv4 address lifetime settings needs to generate a notification, from Jiri Pirko. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) netfilter: don't reset nf_trace in nf_reset() net: ipv4: notify when address lifetime changes ixgbe: fix registration order of driver and DCA nofitication af_unix: If we don't care about credentials coallesce all messages Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL" bonding: remove sysfs before removing devices atl1e: limit gso segment size to prevent generation of wrong ip length fields net: count hw_addr syncs so that unsync works properly. r8169: fix auto speed down issue netfilter: ip6t_NPT: Fix translation for non-multiple of 32 prefix lengths mwifiex: limit channel number not to overflow memory NFC: microread: Fix build failure due to a new MEI bus API iwlwifi: dvm: fix the passive-no-RX workaround netfilter: nf_conntrack: fix error return code NFC: llcp: Keep the connected socket parent pointer alive mac80211: fix idle handling sequence netfilter: nfnetlink_acct: return -EINVAL if object name is empty netfilter: nfnetlink_queue: fix error return code in nfnetlink_queue_init() netfilter: reset nf_trace in nf_reset mac80211: fix remain-on-channel cancel crash ...
| | * | | | | netfilter: don't reset nf_trace in nf_reset()Patrick McHardy2013-04-052-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | net: ipv4: notify when address lifetime changesJiri Pirko2013-04-051-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if userspace changes lifetime of address, send netlink notification and call notifier. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | ixgbe: fix registration order of driver and DCA nofiticationJakub Kicinski2013-04-051-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable <stable@vger.kernel.org> Signed-off-by: Jakub Kicinski <jakub.kicinski@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | af_unix: If we don't care about credentials coallesce all messagesEric W. Biederman2013-04-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was reported that the following LSB test case failed https://lsbbugs.linuxfoundation.org/attachment.cgi?id=2144 because we were not coallescing unix stream messages when the application was expecting us to. The problem was that the first send was before the socket was accepted and thus sock->sk_socket was NULL in maybe_add_creds, and the second send after the socket was accepted had a non-NULL value for sk->socket and thus we could tell the credentials were not needed so we did not bother. The unnecessary credentials on the first message cause unix_stream_recvmsg to start verifying that all messages had the same credentials before coallescing and then the coallescing failed because the second message had no credentials. Ignoring credentials when we don't care in unix_stream_recvmsg fixes a long standing pessimization which would fail to coallesce messages when reading from a unix stream socket if the senders were different even if we did not care about their credentials. I have tested this and verified that the in the LSB test case mentioned above that the messages do coallesce now, while the were failing to coallesce without this change. Reported-by: Karel Srot <ksrot@redhat.com> Reported-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | Revert "af_unix: dont send SCM_CREDENTIAL when dest socket is NULL"Eric W. Biederman2013-04-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 14134f6584212d585b310ce95428014b653dfaf6. The problem that the above patch was meant to address is that af_unix messages are not being coallesced because we are sending unnecesarry credentials. Not sending credentials in maybe_add_creds totally breaks unconnected unix domain sockets that wish to send credentails to other sockets. In practice this break some versions of udev because they receive a message and the sending uid is bogus so they drop the message. Reported-by: Sven Joachim <svenjoac@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | bonding: remove sysfs before removing devicesVeaceslav Falico2013-04-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have a race condition if we try to rmmod bonding and simultaneously add a bond master through sysfs. In bonding_exit() we first remove the devices (through rtnl_link_unregister() ) and only after that we remove the sysfs. If we manage to add a device through sysfs after that the devices were removed - we'll end up with that device/sysfs structure and with the module unloaded. Fix this by first removing the sysfs and only after that calling rtnl_link_unregister(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | atl1e: limit gso segment size to prevent generation of wrong ip length fieldsHannes Frederic Sowa2013-04-052-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The limit of 0x3c00 is taken from the windows driver. Suggested-by: Huang, Xiong <xiong@qca.qualcomm.com> Cc: Huang, Xiong <xiong@qca.qualcomm.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | net: count hw_addr syncs so that unsync works properly.Vlad Yasevich2013-04-052-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few drivers use dev_uc_sync/unsync to synchronize the address lists from master down to slave/lower devices. In some cases (bond/team) a single address list is synched down to multiple devices. At the time of unsync, we have a leak in these lower devices, because "synced" is treated as a boolean and the address will not be unsynced for anything after the first device/call. Treat "synced" as a count (same as refcount) and allow all unsync calls to work. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud