summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion boardFlorian Vaussard2012-09-103-1/+78
| | | | | | | | | | | | | | | | | | | The Gumstix Overo is a computer on module using an OMAP3 processor. This module must be plugged into an expansion board. This patch adds a first device tree support for the Overo, using the Tobi expansion board. The current support is able to boot and mount the rootfs from MMC. This patche also updates the omap3 dtb build target. Currently working: - mmc0 (on board microSD) - i2c0 and i2c2 (i2c1 not used) - led on GPIO Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP4: Add reg and interrupts for every nodesBenoit Cousson2012-09-071-0/+55
| | | | | | | | | | | | | | | Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Specify reg and interrupt property for all nodesVaibhav Hiremath2012-09-071-0/+42
| | | | | | | | | | | | | | | | The device/node resources (like, IORESOURCE_MEM and IORESOURCE_IRQ) are overwritten by hwmod resources, due to all known reasons but that should not be the reason for not providing all the information in the DTS blob. Ideally we should use DTS resource and use HWMOD framework wherever required and for only specific things. Newer platforms like, OMAP5 and AM33XX, we only support DT boot mode, so this patch is preparation for the future where we supposed to get rid of hwmod dependency anyway. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: AM33XX: Convert all hex numbers to lower-caseVaibhav Hiremath2012-09-073-16/+16
| | | | | | | | | To make it consistent, convert all hex number presentation to lower-case from all am33xx specific nodes. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap3-beagle: Enable audio supportPeter Ujfalusi2012-09-071-0/+14
| | | | | | | | Add the needed sections to enable audio support on BeagleBoard when booted with DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5: Add McPDM and DMIC section to the dtsi filePeter Ujfalusi2012-09-071-0/+20
| | | | | | | To be able to load the McPDM and DMIC driver when booted with device tree. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5: Add McBSP entriesPeter Ujfalusi2012-09-071-0/+36
| | | | | | | | Create the sections describing the McBSP ports to be able to use them via DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap4: Add reg-names for McPDM and DMICPeter Ujfalusi2012-09-071-0/+2
| | | | | | | In order to get the memory areas by name when booted with DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap4: Add McBSP entriesPeter Ujfalusi2012-09-071-0/+47
| | | | | | | | Create the sections describing the McBSP ports to be able to use them via DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap3: Add McBSP entriesPeter Ujfalusi2012-09-071-0/+69
| | | | | | | Create the needed sections to be able to probe McBSP ports via DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2Peter Ujfalusi2012-09-071-1/+1
| | | | | | | | Since the board is based on OMAP2420 we should include the dedicated dtsi file (which includes the common omap2 dtsi). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoCPeter Ujfalusi2012-09-072-0/+122
| | | | | | | | The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs supportBenoit Cousson2012-09-071-0/+12
| | | | | | | | Add the support for D6 and D7 LEDs on Beagle board. - D6 will be used for heartbeat - D7 will be used for mmc0 Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVMFlorian Vaussard2012-09-072-0/+33
| | | | | | | | | | | Add device tree properties for twl4030/gpio, according to the platform data of corresponding boards. This enables the led connected to LEDB output for both boards, as well as pullups/pulldowns on GPIO for the BeagleBoard. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
* gpio/twl4030: get platform data from device treeFlorian Vaussard2012-09-072-27/+61
| | | | | | | | | | | | | | | | Adds a number of missing device tree properties for twl4030/gpio, and update bindings: - "ti,use-leds" -> .use_leds - "ti,debounce" -> .debounce - "ti,mmc-cd" -> .mmc_cd - "ti,pullups" -> .pullups - "ti,pulldowns" -> .pulldowns Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> [b-cousson@ti.com: Fix some checkpatch CHECK issues] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: OMAP4: Cleanup and move GIC outside of the OCPBenoit Cousson2012-09-071-32/+8
| | | | | | | | | | | Remove some useless comment and move GIC controller outside of the OCP node since it does use the MPU internal bus and not the OCP. This will not change the functionality but will reflect the reality more accurately. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP4: Add local timer support for Device TreeSantosh Shilimkar2012-09-072-0/+12
| | | | | | | | | Add cortex-a9 local timer support for all OMAP4 based SOCs using DT. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: OMAP4: Add L2 Cache Controller in Device TreeSantosh Shilimkar2012-09-072-1/+14
| | | | | | | | | Provide PL310 Level 2 Cache Controller Device Tree support for OMAP4 based devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boardsAneesh V2012-09-074-0/+107
| | | | | | | | | | | | | Device tree data for the EMIF sdram controllers in OMAP4 and LPDDR2 memory devices attached to OMAP4 boards. Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [b-cousson@ti.com: Use label in board to access EMIF nodes] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* Documentation: dt: emif: device tree bindings for TI's EMIF sdram controllerAneesh V2012-09-071-0/+55
| | | | | | | | | | | | | | EMIF - External Memory Interface - is an SDRAM controller used in TI SoCs. EMIF supports, based on the IP revision, one or more of DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance of the EMIF IP and memory parts attached to it. Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* Documentation: dt: device tree bindings for LPDDR2 memoriesAneesh V2012-09-072-0/+154
| | | | | | | | | | | | | | | | | device tree bindings for LPDDR2 SDRAM memories compliant to JESD209-2 standard. The 'lpddr2' binding in-turn uses another binding 'lpddr2-timings' for specifying the AC timing parameters of the memory device at different speed-bins. Reviewed-by: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* Documentation: dt: i2c: trivial-devices: Update for tmp102Sourav Poddar2012-09-071-0/+1
| | | | | | | | | Add Description for tmp102 temperature sensor. Cc: Felipe Balbi <balbi@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap4-sdp: Add keypad dataSourav Poddar2012-09-072-0/+75
| | | | | | | | | | | | | | Add keypad data node in omap4 device tree file. Also fill the device tree binding parameters with the required value in "omap4-sdp" dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [b-cousson@ti.com: Re-align the entries and the comments]
* ARM: dts: omap5-evm: Add bmp085 sensor supportSourav Poddar2012-09-071-0/+10
| | | | | | | | | Add bmp085 pressure sensor data in omap5 evm dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5-evm: Add keypad dataSourav Poddar2012-09-072-0/+18
| | | | | | | | | | | | | Add keypad data node in omap5 device tree file. Also fill the device tree binding parameters with the required value in "omap5-evm" dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> [b-cousson@ti.com: Fix merge issue with MMC patches, put node at the proper place, align entries and comments] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5-evm: Add tmp102 sensor supportSourav Poddar2012-09-071-0/+10
| | | | | | | | | Add tmp102 temperature sensor data in omap5 evm dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: dts: omap5-evm: Add I2C supportSourav Poddar2012-09-071-0/+35
| | | | | | | | | Add I2C data nodes in omap5 device tree file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: OMAP: omap_device: Do not overwrite resources allocated by OF layerVaibhav Hiremath2012-09-073-12/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With the new devices (like, AM33XX and OMAP5) we now only support DT boot mode of operation and now it is the time to start killing slowly the dependency on hwmod, so with this patch, we are starting with device resources. The idea here is implemented considering to both boot modes - - DT boot mode OF framework will construct the resource structure (currently does for MEM & IRQ resource) and we should respect/use these resources, killing hwmod dependency. If pdev->num_resources > 0, we assume that MEM & IRQ resources have been allocated by OF layer already (through DTB). Once DMA resource is available from OF layer, we should kill filling any resources from hwmod. - Non-DT boot mode Here, pdev->num_resources = 0, and we should get all the resources from hwmod (following existing steps) Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com> [b-cousson@ti.com: Fix some checkpatch CHECK issues] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* ARM: OMAP: omap_device: Fix up resource names when booted with devicetreePeter Ujfalusi2012-09-061-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | When booted with some resource will have their name set to NULL. This can cause later kernel crash since this is not expected by the platform code. When we boot without DT the devices are created with platform_device_add() which itself fixes up the missing resource names: if (r->name == NULL) r->name = dev_name(&pdev->dev); The of core also fixes up the resource names when taking the information from DT data - in __of_address_to_resource(): r->name = name ? name : dev->full_name; When we boot OMAP with devicetree: of will create the devices based on the DT data so the resource names are guarantied to be not NULL. Since we have the 'ti,hwmod' tag, we remove the of created resources from the device and re-create them based on hwmod data. If the hwmod data does not specify a name for a resource it will be NULL. This can cause kernel crash if the driver uses platform_get_resource_byname() to get any resource. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [b-cousson@ti.com: Change omap_hwmod to omap_device in subject] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
* arm/dts: Add tps65217 regulator DT data to am335x-bone.dtsAnilKumar Ch2012-08-301-0/+54
| | | | | | | | | | | | | | Add tps65217 regulator device tree data to AM335x-Bone by adding regulator consumers with tightened constraints and regulator-name. TPS65217 regulator handle can be obtained by using this regulator name. This patch also add I2C node with I2C frequency and tps65217 PMIC I2C slave address. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm/dts: Add tps65910 regulator DT data to am335x-evm.dtsAnilKumar Ch2012-08-301-0/+94
| | | | | | | | | | | | | | Add tps65910 regulator device tree data to AM335x-EVM by adding regulator consumers with tightened constraints and regulator-name. TPS65910 regulator handle can be obtained by using this regulator name. This patch also add I2C node with I2C frequency and tps65910 PMIC I2C slave address. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm/dts: regulator: Add tps65217 device tree dataAnilKumar Ch2012-08-301-0/+56
| | | | | | | | | | | | | | Add device tree data for tps65217 regulator by adding all tps65217 regulator nodes. Regulator is initialized based on compatiable name provided in tps65217 DT file. All tps65910 PMIC regulator device tree nodes are placed in a seperate device tree include file (tps65217.dtsi). This patch was tested on AM335x-Bone. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm/dts: regulator: Add tps65910 device tree dataAnilKumar Ch2012-08-301-0/+86
| | | | | | | | | | | | | | Add device tree data for tps65910 regulator by adding all tps65910 regulator nodes. Regulator is initialized based on compatiable name provided in tps65910 DT file. All tps65910 PMIC regulator device tree nodes are placed in a seperate device tree include file (tps65910.dtsi). This patch was tested on AM335x-EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'devel-dt-regulator' into devel-dtTony Lindgren2012-08-307-19/+30
|\
| * arm/dts: Cleanup regulator naming and remove @0,1Rajendra Nayak2012-08-304-19/+19
| | | | | | | | | | | | | | | | | | regulators do not have a 'reg' property, hence the regulator@0, regulator@1 do not make sense. get rid of it. Reported-by: David Brown <davidb@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always onRajendra Nayak2012-08-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | vcxio, v2v1 and v1v8 are expected to be always on, update the dtsi for twl6030 to reflect this. commit '86f5fc' regulator: core: Mark all DT based boards as having full constraints) caused these to be disabled at late boot causing OMAP4 boards (using twl6030) to lockup. Reported-by: Kishon Vijay Abraham I <kishon@ti.com> Reported-by: J Keerthy <j-keerthy@ti.com> Signed-off-by: Rajendra nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * OMAP2+: Fix random config build break with !ARM_CPU_SUSPENDSantosh Shilimkar2012-08-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The random config builds with PM and !ARM_CPU_SUSPEND breaks with below error on omap2plus_defconfig. arch/arm/mach-omap2/sleep44xx.S:323: undefined reference to `cpu_resume' arch/arm/mach-omap2/omap-mpuss-lowpower.c:278: undefined reference to `cpu_suspend' This is because recently merged OMAP5 platform shares the common files with OMAP4 but doesn't select ARM_CPU_SUSPEND. Without the ARM_CPU_SUSPEND the sleep code is meaningless. Fix the same by adding ARM_CPU_SUSPEND for OMAP5. The suggestion came from Russell King in an off-list discussion. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Kevin Hilman <khilman@ti.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * arm/dts: Fix am33xx wdt nodeAfzal Mohammed2012-08-071-0/+5
| | | | | | | | | | | | | | | | Add am33xx wdt node. Signed-off-by: Afzal Mohammed <afzal@ti.com> [tony@atomide.com: I messed up and produced an empty commit db27ac80 with stg apply] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * ARM: OMAP3: igep0020: set GPIO mode for mux mcspi1_cs2 pinJavier Martinez Canillas2012-08-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the IGEPv2 Rev.C data-sheet the LAN9221i pin 14 (IRQ) is connected to the OMAP3730 mcspi1_cs2 pin. Since this omap mux pin acts as an IRQ line, it has to be configured as an input GPIO. IGEPv2 platform code sets the smsc911x_cfg->gpio_irq to GPIO 176 but since the mux pin default mode is MODE7 (safe_mode) the driver fails when trying to register the IRQ with the following error message: [ 1.994598] smsc911x: Driver version 2008-10-21 [ 3.704162] irq 272: nobody cared (try booting with the "irqpoll" option) [ 3.711364] [<c001a114>] (unwind_backtrace+0x0/0xf0) from [<c009a0d4>] (__report_bad_irq+0x20/0xbc) [ 3.720916] [<c009a0d4>] (__report_bad_irq+0x20/0xbc) from [<c009a41c>] (note_interrupt+0x1d8/0x238) [ 3.730560] [<c009a41c>] (note_interrupt+0x1d8/0x238) from [<c0098234>] (handle_irq_event_percpu+0xc0/0x260) [ 3.740936] [<c0098234>] (handle_irq_event_percpu+0xc0/0x260) from [<c0098410>] (handle_irq_event+0x3c/0x5c) [ 3.751312] [<c0098410>] (handle_irq_event+0x3c/0x5c) from [<c009abe0>] (handle_level_irq+0xac/0x10c) [ 3.761047] [<c009abe0>] (handle_level_irq+0xac/0x10c) from [<c0097a34>] (generic_handle_irq+0x30/0x48) [ 3.770935] [<c0097a34>] (generic_handle_irq+0x30/0x48) from [<c02a6b74>] (gpio_irq_handler+0x180/0x1d4) [ 3.780944] [<c02a6b74>] (gpio_irq_handler+0x180/0x1d4) from [<c0097a34>] (generic_handle_irq+0x30/0x48) [ 3.790954] [<c0097a34>] (generic_handle_irq+0x30/0x48) from [<c0013e18>] (handle_IRQ+0x4c/0xac) [ 3.800231] [<c0013e18>] (handle_IRQ+0x4c/0xac) from [<c000858c>] (omap3_intc_handle_irq+0x60/0x74) [ 3.809783] [<c000858c>] (omap3_intc_handle_irq+0x60/0x74) from [<c04979e4>] (__irq_svc+0x44/0x60) [ 3.819213] Exception stack(0xee42fde0 to 0xee42fe28) [ 3.824554] fde0: 00000001 00000001 00000000 00000000 60000013 c06cce14 c06cce14 00000110 [ 3.833190] fe00: 00000000 c06ccdf4 60000013 ee41d000 fb058064 ee42fe28 c0089e08 c04976b4 [ 3.841796] fe20: 20000013 ffffffff [ 3.845489] [<c04979e4>] (__irq_svc+0x44/0x60) from [<c04976b4>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 3.855499] [<c04976b4>] (_raw_spin_unlock_irqrestore+0x34/0x44) from [<c0099744>] (__setup_irq+0x1b8/0x3f0) [ 3.865875] [<c0099744>] (__setup_irq+0x1b8/0x3f0) from [<c0099a34>] (request_threaded_irq+0xb8/0x140) [ 3.875701] [<c0099a34>] (request_threaded_irq+0xb8/0x140) from [<c0487950>] (smsc911x_drv_probe+0x75c/0x11a4) [ 3.886260] [<c0487950>] (smsc911x_drv_probe+0x75c/0x11a4) from [<c02e9bcc>] (platform_drv_probe+0x18/0x1c) [ 3.906707] [<c02e89b8>] (driver_probe_device+0x90/0x210) from [<c02e8bcc>] (__driver_attach+0x94/0x98) [ 3.916625] [<c02e8bcc>] (__driver_attach+0x94/0x98) from [<c02e7298>] (bus_for_each_dev+0x50/0x7c) [ 3.926177] [<c02e7298>] (bus_for_each_dev+0x50/0x7c) from [<c02e81d4>] (bus_add_driver+0x184/0x248) [ 3.935821] [<c02e81d4>] (bus_add_driver+0x184/0x248) from [<c02e909c>] (driver_register+0x78/0x12c) [ 3.945465] [<c02e909c>] (driver_register+0x78/0x12c) from [<c0008648>] (do_one_initcall+0x34/0x178) [ 3.955108] [<c0008648>] (do_one_initcall+0x34/0x178) from [<c066e8f4>] (kernel_init+0xfc/0x1c0) [ 3.964385] [<c066e8f4>] (kernel_init+0xfc/0x1c0) from [<c00140b0>] (kernel_thread_exit+0x0/0x8) [ 3.973632] handlers: [ 3.976043] [<c034e2cc>] smsc911x_irqhandler [ 3.980560] Disabling IRQ #272 Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | ARM: omap: add dtb targetsOlof Johansson2012-08-241-0/+6
| | | | | | | | | | | | | | | | Makes it easier to just do 'make dtbs' for whatever the kernel was configured for, just like some other platforms. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm/dts: AM33XX: Set the default status of module to "disabled" stateVaibhav Hiremath2012-08-243-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ideally in common SoC dtsi file should set all modules to "disabled" state and it should get enabled in respective EVM/Board dts file as per usage. This patch sets default status of all modules to "disabled" state in am33xx.dtsi file. Currently there are no modules supported as part of Bone and EVM dts support, so care to add entry "status = "okay"" while adding support for any module. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm/dts: omap5: Add mmc controller nodes and board dataBalaji T K2012-08-242-0/+62
| | | | | | | | | | | | | | | | Add OMAP MMC related device tree data for OMAP5. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Linux 3.6-rc3v3.6-rc3Linus Torvalds2012-08-221-1/+1
| |
* | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2012-08-2228-181/+419
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "Intel: edid fixes, power consumption fix, s/r fix, haswell fix Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better MSAA validation, lockup timeout fixes, modesetting fixes One udl dpms fix, one vmwgfx fix, a couple of trivial core changes. There is an export added to ACPI as part of the radeon bios fixes. I've also included the fbcon flashing cursor vs deinit race fix, that seems the simplest place to start" Trivial conflict in drivers/video/console/fbcon.c due to me having already applied the fbcon flashing cursor vs deinit race fix, and Dave had added a comment in there too. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) fbcon: fix race condition between console lock and cursor timer (v1.1) drm: Add missing static storage class specifiers in drm_proc.c file drm/udl: dpms off the crtc when disabled. drm: Remove two unused fields from struct drm_display_mode drm: stop vmgfx driver explosion drm/radeon/ss: use num_crtc rather than hardcoded 6 Revert "drm/radeon: fix bo creation retry path" drm/i915: use hsw rps tuning values everywhere on gen6+ drm/radeon: split ATRM support out from the ATPX handler (v3) drm/radeon: convert radeon vfct code to use acpi_get_table_with_size ACPI: export symbol acpi_get_table_with_size drm/radeon: implement ACPI VFCT vbios fetch (v3) drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping drm/radeon: fix checking of MSAA renderbuffers on r600-r700 drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700 drm/radeon: init lockup timeout on ring init drm/radeon: avoid turning off spread spectrum for used pll drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads drm/i915: extract connector update from intel_ddc_get_modes() for reuse drm/i915: fix hsw uncached pte ...
| * | fbcon: fix race condition between console lock and cursor timer (v1.1)Dave Airlie2012-08-221-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So we've had a fair few reports of fbcon handover breakage between efi/vesafb and i915 surface recently, so I dedicated a couple of days to finding the problem. Essentially the last thing we saw was the conflicting framebuffer message and that was all. So after much tracing with direct netconsole writes (printks under console_lock not so useful), I think I found the race. Thread A (driver load) Thread B (timer thread) unbind_con_driver -> | bind_con_driver -> | vc->vc_sw->con_deinit -> | fbcon_deinit -> | console_lock() | | | | fbcon_flashcursor timer fires | console_lock() <- blocked for A | | fbcon_del_cursor_timer -> del_timer_sync (BOOM) Of course because all of this is under the console lock, we never see anything, also since we also just unbound the active console guess what we never see anything. Hopefully this fixes the problem for anyone seeing vesafb->kms driver handoff. v1.1: add comment suggestion from Alan. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: Add missing static storage class specifiers in drm_proc.c fileSachin Kamat2012-08-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following sparse warning: drivers/gpu/drm/drm_proc.c:92:5: warning: symbol 'drm_proc_create_files' was not declared. Should it be static? drivers/gpu/drm/drm_proc.c:175:5: warning: symbol 'drm_proc_remove_files' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm/udl: dpms off the crtc when disabled.Dave Airlie2012-08-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | This turns off the crtc when its been disabled, fixes it not turning off properly the whole time. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
| * | drm: Remove two unused fields from struct drm_display_modeDamien Lespiau2012-08-222-5/+0
| | | | | | | | | | | | | | | | | | Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm: stop vmgfx driver explosionAlan Cox2012-08-221-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you do a page flip with no flags set then event is NULL. If event is NULL then the vmw_gfx driver likes to go digging into NULL and extracts NULL->base.file_priv. On a modern kernel with NULL mapping protection it's just another oops, without it there are some "intriguing" possibilities. What it should do is an open question but that for the driver owners to sort out. Signed-off-by: Alan Cox <alan@linux.intel.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | Merge branch 'drm-intel-fixes' of ↵Dave Airlie2012-08-2210-64/+141
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: " Nothing too major: - A few fixes around the edid handling from Jani, also fixing a regression in 3.5 due to us using gmbus by default. - Fixup hsw uncached pte flags. - Fix suspend/resume crash when using hw contexts, from Ben. - Try to tune gpu turbo a bit better, seems to help with some oddball power regressions." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: use hsw rps tuning values everywhere on gen6+ drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads drm/i915: extract connector update from intel_ddc_get_modes() for reuse drm/i915: fix hsw uncached pte drm/i915/contexts: fix list corruption drm/i915: fix EDID memory leak in SDVO
OpenPOWER on IntegriCloud