summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: l2c: squelch warning dump on power control settingSekhar Nori2014-07-141-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | On OMAP SOCs using PL310 controllers, power_ctrl register is not accessible from non-secure software even on PL310 versions which support it. The secure code takes care of setting it up correctly and power transitions are proven on these devices. For example, AM437x has L2C-310 version r3p3 and ROM code on that device does not support writing to L2C-310 power control register. The L2C driver, however, tries writing to this register for all revisions >= r3p0. This leads to a warning dump on boot which leads most users to believe that L2 cache is non-functional. Since the problem is understood, and cannot be addressed through software, replace the warning with a pr_info() while maintaining the WARN_ON() for other truly unexpected scenarios. Reported-by: Nishanth Menon <nm@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Remove non working OMAP HDMI audio initializationJyri Sarha2014-07-081-28/+0
| | | | | | | | | This code is not working currently and it can be removed. There is a conflict in sharing resources with the actual HDMI driver and with the ASoC HDMI audio DAI driver. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'for-v3.16-rc/omap-fixes-b' of ↵Tony Lindgren2014-07-084-6/+23
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.16/fixes Some miscellaneous fixes for OMAP clock code, DRA7xx device data, and PRCM code (when DSPBridge is used) for v3.16-rc. Basic build, boot, and PM test logs are available here: http://www.pwsan.com/omap/testlogs/prcm-a-v3.16-rc/20140706174258/
| * ARM: OMAP2+: clock/dpll: fix _dpll_test_fint arithmetics overflowTero Kristo2014-07-061-1/+1
| | | | | | | | | | | | | | | | | | | | The divider value provided to the _dpll_test_fint can reach value of 256 with J type DPLLs (USB etc.), which causes an overflow with the u8 datatype. Fix this by changing the parameter to be an int instead. Signed-off-by: Tero Kristo <t-kristo@ti.com> [paul@pwsan.com: changed type of 'n' to unsigned int] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * ARM: DRA7: hwmod: Add SYSCONFIG for usb_otg_ssRoger Quadros2014-07-061-0/+12
| | | | | | | | | | | | | | | | | | | | Add the sysconfig class bits for the Super Speed USB controllers Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * ARM: DRA7: hwmod: Fixup SATA hwmodRoger Quadros2014-07-061-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of optional clock as that is now managed by the AHCI platform driver. Correct .mpu_rt_idx to 1 as the module register space (SYSCONFIG..) is passed as the second memory resource in the device tree. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driverSuman Anna2014-07-062-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 7be914f {ARM: OMAP3: PRM/CM: Cleanup unused header} removed some of the macros used by the TI DSP/Bridge driver. This fixes the following build errors when trying to build DSP/Bridge driver (disabled at present), otherwise results in the following build errors: drivers/staging/tidspbridge/core/tiomap3430.c:531:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430.c:531:31: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430.o] Error 1 make[3]: *** Waiting for unfinished jobs.... drivers/staging/tidspbridge/core/tiomap_io.c: In function 'sm_interrupt_dsp': drivers/staging/tidspbridge/core/tiomap_io.c:404:31: error: 'OMAP3430_AUTO_IVA2_DPLL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:404:31: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap_io.c:414:12: error: 'OMAP3430_IVA2_DPLL_FREQSEL_SHIFT' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap_io.c:415:12: error: 'OMAP3430_EN_IVA2_DPLL_SHIFT' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap_io.o] Error 1 drivers/staging/tidspbridge/core/tiomap3430_pwr.c: In function 'dsp_clk_wakeup_event_ctrl': drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: error: 'OMAP3430_GRPSEL_GPT5_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:442:19: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/tidspbridge/core/tiomap3430_pwr.c:455:19: error: 'OMAP3430_GRPSEL_GPT6_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:468:19: error: 'OMAP3430_GRPSEL_GPT7_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:481:19: error: 'OMAP3430_GRPSEL_GPT8_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:494:19: error: 'OMAP3430_GRPSEL_MCBSP1_MASK' undeclared (first use in this function) drivers/staging/tidspbridge/core/tiomap3430_pwr.c:546:19: error: 'OMAP3430_GRPSEL_MCBSP5_MASK' undeclared (first use in this function) make[3]: *** [drivers/staging/tidspbridge/core/tiomap3430_pwr.o] Error 1 make[2]: *** [drivers/staging/tidspbridge] Error 2 Fixes: 7be914f (ARM: OMAP3: PRM/CM: Cleanup unused header) Cc: Rajendra Nayak <rnayak@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | Merge branch 'for-v3.16-rc/clk-dt-fixes' of ↵Tony Lindgren2014-07-071-4/+6
|\ \ | | | | | | | | | https://github.com/t-kristo/linux-pm into fixes-rc4
| * | ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock ratesRajendra Nayak2014-07-031-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 532000000 With the patch: /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck # cat clk_rate 532000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div # cat clk_rate 266000000 /debug/.../dpll_core_x2_ck/dpll_core_h12x2_ck/l3_iclk_div/l4_root_clk_div # cat clk_rate 133000000 The l3 clock derived from core DPLL is actually a divider clock, with the default divider set to 2. l4 then derived from l3 is a fixed factor clock, but the fixed divider is 2 and not 1. Which means the l3 clock is half of core DPLLs h12x2 and l4 is half of l3 (as seen with this patch) Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
* | | ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA.Enric Balletbo i Serra2014-07-071-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | As this board use external clock for RMII interface we should specify 'rmii' phy mode and 'rmii-clock-ext' to make ethernet working. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: dts: am335x-evmsk: Enable the McASP FIFO for audioPeter Ujfalusi2014-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: dts: am335x-evm: Enable the McASP FIFO for audioPeter Ujfalusi2014-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The use of FIFO in McASP can reduce the risk of audio under/overrun and lowers the load on the memories since the DMA will operate in bursts. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: OMAP2+: Make GPMC skip disabled devicesGuido Martínez2014-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, child nodes of the gpmc node are iterated and probed regardless of their 'status' property. This means adding 'status = "disabled";' has no effect. This patch changes the iteration to only probe nodes marked as available. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: OMAP2+: create dsp device only on OMAP3 SoCsSuman Anna2014-07-071-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DSP platform device for TI DSP/Bridge is currently created unconditionally whenever CONFIG_TIDSPBRIDGE is enabled. This device should only be created on OMAP34xx/ OMAP36xx SoCs, and not for other OMAP3 derived SoCs or when booting multi-arch images on other SoCs. So, add a check for the SoC family both before creating the device and allocating the carveout memory for the device. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always onRoger Quadros2014-07-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After clarification from the hardware team it was found that this 1.8V PHY supply can't be switched OFF when SoC is Active. Since the PHY IPs don't contain isolation logic built in the design to allow the power rail to be switched off, there is a very high risk of IP reliability and additional leakage paths which can result in additional power consumption. The only scenario where this rail can be switched off is part of Power on reset sequencing, but it needs to be kept always-on during operation. This patch is required for proper functionality of USB, SATA and PCIe on DRA7-evm. CC: Rajendra Nayak <rnayak@ti.com> CC: Tero Kristo <t-kristo@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | ARM: DRA7/AM43XX: fix header definition for omap44xx_restartNishanth Menon2014-07-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap44xx_restart is defined as a static void inline when DRA7/AM437X is defined alone, which implies that the restart function is no longer functional even though it is built in. So, fix the definition of the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Linux 3.16-rc4v3.16-rc4Linus Torvalds2014-07-061-1/+1
| | |
* | | Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds2014-07-061-0/+15
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull devicetree bugfix from Grant Likely: "Important bug fix for parsing 64-bit addresses on 32-bit platforms. Without this patch the kernel will try to use memory ranges that cannot be reached" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of: Check for phys_addr_t overflows in early_init_dt_add_memory_arch
| * | | of: Check for phys_addr_t overflows in early_init_dt_add_memory_archLaura Abbott2014-06-261-0/+15
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The common early_init_dt_add_memory_arch takes the base and size of a memory region as u64 types. The function never checks if the base and size can actually fit in a phys_addr_t which may be smaller than 64-bits. This may result in incorrect memory being passed to memblock_add if the memory falls outside the range of phys_addr_t. Add range checks for the base and size if phys_addr_t is smaller than u64. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
* | | Merge tag 'scsi-for-linus' of ↵Linus Torvalds2014-07-0613-43/+86
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of 13 fixes, a MAINTAINERS update and a sparse update. The fixes are mostly correct value initialisations, avoiding NULL derefs and some uninitialised pointer avoidance. All the patches have been incubated in -next for a few days. The final patch (use the scsi data buffer length to extract transfer size) has been rebased to add a cc to stable, but only the commit message has changed" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] use the scsi data buffer length to extract transfer size virtio-scsi: fix various bad behavior on aborted requests virtio-scsi: avoid cancelling uninitialized work items ibmvscsi: Add memory barriers for send / receive ibmvscsi: Abort init sequence during error recovery qla2xxx: Fix sparse warning in qla_target.c. bnx2fc: Improve stats update mechanism bnx2fc: do not scan uninitialized lists in case of error. fc: ensure scan_work isn't active when freeing fc_rport pm8001: Fix potential null pointer dereference and memory leak. MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers Email IDs be2iscsi: remove potential junk pointer free be2iscsi: add an missing goto in error path scsi_error: set DID_TIME_OUT correctly scsi_error: fix invalid setting of host byte
| * \ \ Merge remote-tracking branch 'scsi-queue/drivers-for-3.16' into for-linusJames Bottomley2014-07-0311-32/+75
| |\ \ \
| | * | | virtio-scsi: fix various bad behavior on aborted requestsPaolo Bonzini2014-06-251-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even though the virtio-scsi spec guarantees that all requests related to the TMF will have been completed by the time the TMF itself completes, the request queue's callback might not have run yet. This causes requests to be completed more than once, and as a result triggers a variety of BUGs or oopses. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | virtio-scsi: avoid cancelling uninitialized work itemsPaolo Bonzini2014-06-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling the workqueue interface on uninitialized work items isn't a good idea even if they're zeroed. It's not failing catastrophically only through happy accidents. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | ibmvscsi: Add memory barriers for send / receiveBrian King2014-06-251-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a memory barrier prior to sending a new command to the VIOS to ensure the VIOS does not receive stale data in the command buffer. Also add a memory barrier when processing the CRQ for completed commands. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | ibmvscsi: Abort init sequence during error recoveryBrian King2014-06-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a CRQ reset is triggered for some reason while in the middle of performing VSCSI adapter initialization, we don't want to call the done function for the initialization MAD commands as this will only result in two threads attempting initialization at the same time, resulting in failures. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | qla2xxx: Fix sparse warning in qla_target.c.Quinn Tran2014-06-252-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | bnx2fc: Improve stats update mechanismNeil Horman2014-06-251-12/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recently had this warning reported: [ 290.489047] Call Trace: [ 290.489053] [<ffffffff8169efec>] dump_stack+0x19/0x1b [ 290.489055] [<ffffffff810ac7a9>] __might_sleep+0x179/0x230 [ 290.489057] [<ffffffff816a4ad5>] mutex_lock_nested+0x55/0x520 [ 290.489061] [<ffffffffa01b9905>] ? bnx2fc_l2_rcv_thread+0xc5/0x4c0 [bnx2fc] [ 290.489065] [<ffffffffa0174c1a>] fc_vport_id_lookup+0x3a/0xa0 [libfc] [ 290.489068] [<ffffffffa01b9a6c>] bnx2fc_l2_rcv_thread+0x22c/0x4c0 [bnx2fc] [ 290.489070] [<ffffffffa01b9840>] ? bnx2fc_vport_destroy+0x110/0x110 [bnx2fc] [ 290.489073] [<ffffffff8109e0cd>] kthread+0xed/0x100 [ 290.489075] [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 [ 290.489077] [<ffffffff816b2fec>] ret_from_fork+0x7c/0xb0 [ 290.489078] [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 Its due to the fact that we call a potentially sleeping function from the bnx2fc rcv path with preemption disabled (via the get_cpu call embedded in the per-cpu variable stats lookup in bnx2fc_l2_rcv_thread. Easy enough fix, we can just move the stats collection later in the function where we are sure we won't preempt or sleep. This also allows us to not have to enable pre-emption when doing a per-cpu lookup, since we're certain not to get rescheduled. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | bnx2fc: do not scan uninitialized lists in case of error.Maurizio Lombardi2014-06-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of of error, the bnx2fc_cmd_mgr_alloc() function will call the bnx2fc_cmd_mgr_free() to perform the cleanup. The problem is that in one case the latter may try to scan some not-yet initialized lists, resulting in a kernel panic. This patch prevents this from happening by freeing the lists before calling bnx2fc_cmd_mgr_free(). Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | fc: ensure scan_work isn't active when freeing fc_rportNeil Horman2014-06-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | debugfs caught this: WARNING: at lib/debugobjects.c:260 debug_print_object+0x83/0xa0() ODEBUG: free active (active state 0) object type: work_struct hint: fc_scsi_scan_rport+0x0/0xd0 [scsi_transport_fc] CPU: 1 PID: 184 Comm: kworker/1:1 Tainted: G W -------------- 3.10.0-123.el7.x86_64.debug #1 Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 Workqueue: fc_wq_5 fc_rport_final_delete [scsi_transport_fc] Call Trace: [<ffffffff8169efec>] dump_stack+0x19/0x1b [<ffffffff8106cbd1>] warn_slowpath_common+0x61/0x80 [<ffffffff8106cc4c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8133e003>] debug_print_object+0x83/0xa0 [<ffffffffa04e2f40>] ? fc_parse_wwn+0x100/0x100 [<ffffffff8133f23b>] debug_check_no_obj_freed+0x22b/0x270 [<ffffffffa04e127e>] ? fc_rport_dev_release+0x1e/0x30 [<ffffffff811db3e9>] kfree+0xd9/0x2d0 [<ffffffffa04e127e>] fc_rport_dev_release+0x1e/0x30 [<ffffffff81428032>] device_release+0x32/0xa0 [<ffffffff8132701e>] kobject_release+0x7e/0x1b0 [<ffffffff81326ed8>] kobject_put+0x28/0x60 [<ffffffff81428397>] put_device+0x17/0x20 [<ffffffffa04e5025>] fc_rport_final_delete+0x165/0x210 [<ffffffff810959b0>] process_one_work+0x220/0x710 [<ffffffff81095944>] ? process_one_work+0x1b4/0x710 [<ffffffff81095fbb>] worker_thread+0x11b/0x3a0 [<ffffffff81095ea0>] ? process_one_work+0x710/0x710 [<ffffffff8109e0cd>] kthread+0xed/0x100 [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 [<ffffffff816b2fec>] ret_from_fork+0x7c/0xb0 [<ffffffff8109dfe0>] ? insert_kthread_work+0x80/0x80 Seems to be because the scan_work work_struct might be active when the housing fc_rport struct gets freed. Ensure that we cancel it prior to freeing the rport Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: Vasu Dev <vasu.dev@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | pm8001: Fix potential null pointer dereference and memory leak.Maurizio Lombardi2014-06-251-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pm8001_get_phy_settings_info() function does not check the kzalloc() return value and does not free the allocated memory. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | MAINTAINERS: Update LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) maintainers ↵Reddy, Sreekanth2014-06-251-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Email IDs Updating maintainers Email Ids for the entry LSILOGIC MPT FUSION DRIVERS in MAINTAINERS file Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | be2iscsi: remove potential junk pointer freeTomas Henzl2014-06-251-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0e7c60c [SCSI] be2iscsi: fix memory leak in error path fixed an potential junk pointer free if mgmt_get_if_info() returned an error fix it on one more place Signed-off-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
| | * | | be2iscsi: add an missing goto in error pathTomas Henzl2014-06-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a jump to 'free_memory' is apparently missing Signed-off-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * | | | [SCSI] use the scsi data buffer length to extract transfer sizeMartin K. Petersen2014-07-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8846bab180fa introduced a helper that can be used to query the wire transfer size for a SCSI command taking protection information into account. However, some commands do not have a 1:1 mapping between the block range they work on and the payload size (discard, write same). After the scatterlist has been set up these requests use __data_len to store the number of bytes to report completion on. This means that callers of scsi_transfer_length() would get the wrong byte count for these types of requests. To overcome this we make scsi_transfer_length() use the scatterlist length in the scsi_data_buffer as basis for the wire transfer calculation instead of __data_len. Reported-by: Christoph Hellwig <hch@infradead.org> Debugged-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Fixes: d77e65350f2d82dfa0557707d505711f5a43c8fd Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * | | | scsi_error: set DID_TIME_OUT correctlyHannes Reinecke2014-06-241-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Any callbacks in scsi_timeout_out() might return BLK_EH_RESET_TIMER, in which case we should leave the result alone and not set DID_TIME_OUT, as the command didn't actually timeout. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com>
| * | | | scsi_error: fix invalid setting of host byteUlrich Obergfell2014-06-241-4/+4
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After scsi_try_to_abort_cmd returns, the eh_abort_handler may have already found that the command has completed in the device, causing the host_byte to be nonzero (e.g. it could be DID_ABORT). When this happens, ORing DID_TIME_OUT into the host byte will corrupt the result field and initiate an unwanted command retry. Fix this by using set_host_byte instead, following the model of commit 2082ebc45af9c9c648383b8cde0dc1948eadbf31. Cc: stable@vger.kernel.org Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> [Fix all instances according to review comments. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
* | | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2014-07-055-5/+51
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "i915, tda998x and vmwgfx fixes, The main one is i915 fix for missing VGA connectors, along with some fixes for the tda998x from Russell fixing some modesetting problems. (still on holidays, but got a spare moment to find these)" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix incorrect write to read-only register v2: drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin drm/i915: only apply crt_present check on VLV drm/i915: Wait for vblank after enabling the primary plane on BDW drm/i2c: tda998x: add some basic mode validation drm/i2c: tda998x: faster polling for edid drm/i2c: tda998x: move drm_i2c_encoder_destroy call
| * \ \ \ Merge tag 'drm-intel-fixes-2014-07-03' of ↵Dave Airlie2014-07-063-1/+42
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel Fixes for 3.16-rc3; most importantly Jesse brings back VGA he took away on a bunch of machines. Also a vblank fix for BDW and a power workaround fix for VLV. * tag 'drm-intel-fixes-2014-07-03' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin drm/i915: only apply crt_present check on VLV drm/i915: Wait for vblank after enabling the primary plane on BDW
| | * | | | drm/i915: Drop early VLV WA to fix Voltage not getting dropped to VminDeepak S2014-07-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop WA to fix Voltage not getting dropped to Vmin when Gfx is power gated for latest VLV revision. Workaround fixed in Latest VLV revision. Forcing Gfx clk up not needed, and Requesting the min freq should bring bring the voltage Vnn. v2: Drop WA for Latest VLV revision (Ville) Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: modified code comment, reformatted the commit message a bit.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915: only apply crt_present check on VLVJesse Barnes2014-06-301-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently we can't trust this field on other platforms and need to find some other way. This fixes a regression introduced in commit 27da3bdfcf7f5233cdfe4563f53edf1ecab7cea0 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Apr 4 16:12:07 2014 -0700 drm/i915: use VBT to determine whether to enumerate the VGA port Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| | * | | | drm/i915: Wait for vblank after enabling the primary plane on BDWVille Syrjälä2014-06-272-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BDW signals the flip done interrupt immediately after the DSPSURF write when the plane is disabled. This is true even if we've already armed DSPCNTR to enable the plane at the next vblank. This causes major problems for our page flip code which relies on the flip done interrupts happening at vblank time. So what happens is that we enable the plane, and immediately allow userspace to submit a page flip. If the plane is still in the process of being enabled when the page flip is issued, the flip done gets signalled immediately. Our DSPSURFLIVE check catches this to prevent premature flip completion, but it also means that we don't get a flip done interrupt when the plane actually gets enabled, and so the page flip is never completed. Work around this by re-introducing blocking vblank waits on BDW whenever we enable the primary plane. I removed some of the vblank waits here: commit 6304cd91e7f05f8802ea6f91287cac09741d9c46 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Apr 25 13:30:12 2014 +0300 drm/i915: Drop the excessive vblank waits from modeset codepaths To avoid these blocking vblank waits we should start using the vblank interrupt instead of the flip done interrupt to complete page flips. But that's material for another patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79354 Tested-by: Guo Jinxian <jinxianx.guo@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| * | | | | Merge branch 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linuxDave Airlie2014-07-061-1/+0
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix to a 3.15 commit. * 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix incorrect write to read-only register v2:
| | * | | | | drm/vmwgfx: Fix incorrect write to read-only register v2:Thomas Hellstrom2014-07-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register: SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to SVGA_REG_PITCHLOCK. This patch is Cc'd stable because of the unknown effects writing to this register might have, particularly on older device versions. v2: Updated log message. Cc: stable@vger.kernel.org Cc: Christopher Friedt <chrisfriedt@gmail.com> Tested-by: Christopher Friedt <chrisfriedt@gmail.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
| * | | | | | Merge branch 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie2014-07-061-3/+9
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mode fixes for tda998x. * 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: add some basic mode validation drm/i2c: tda998x: faster polling for edid drm/i2c: tda998x: move drm_i2c_encoder_destroy call
| | * | | | | | drm/i2c: tda998x: add some basic mode validationRussell King2014-06-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TDA998x can't handle modes with clocks above 150MHz, or resolutions larger than 8192x2048. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | | drm/i2c: tda998x: faster polling for edidRussell King2014-06-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of Jean-Francois patches changed the EDID polling to once every 10ms for 10 interations, whereas the original code did 1ms for 100 interations. This appears to cause boot-time detection to take noticably longer. Revert this change. Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | | | | | drm/i2c: tda998x: move drm_i2c_encoder_destroy callGuido Martínez2014-06-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently tda998x_encoder_destroy() calls cec_write() and reg_clear(), as part of the release procedure. Such calls need to access the I2C bus and therefore, we need to call them before drm_i2c_encoder_destroy() which unregisters the I2C device. This commit moves the latter so it's done afterwards. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2014-07-0524-67/+292
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This week's arm-soc fixes: - A set of of OMAP patches that we had missed Tony's pull request of: * Reset fix for am43xx * Proper OPP table for omap5 * Fix for SoC detection of one of the DRA7 SoCs * hwmod updates to get SATA and OCP to work on omap5 (drivers merged in 3.16) * ... plus a handful of smaller fixes - sunxi needed to re-add machine specific restart code that was removed in anticipation of a watchdog driver being merged for 3.16, and it didn't make it in. - Marvell fixes for PCIe on SMP and a big-endian fix. - A trivial defconfig update to make my capri test board boot with bcm_defconfig again. ... and a couple of MAINTAINERS updates, one to claim new Keystone drivers that have been merged, and one to merge MXS and i.MX (both Freescale platforms). The largest diffs come from the hwmod code for omap5 and the re-add of the restart code on sunxi. The hwmod stuff is quite late at this point but it slipped through cracks repeatedly while coming up the maintainer chain and only affects the one SoC so risk is low" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Add few more Keystone drivers MAINTAINERS: merge MXS entry into IMX one ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs ARM: mvebu: fix cpuidle implementation to work on big-endian systems ARM: mvebu: update L2/PCIe deadlock workaround after L2CC cleanup ARM: mvebu: move Armada 375 external abort logic as a quirk ARM: bcm: Fix bcm and multi_v7 defconfigs ARM: dts: dra7-evm: remove interrupt binding ARM: OMAP2+: Fix parser-bug in platform muxing code ARM: DTS: dra7/dra7xx-clocks: ATL related changes ARM: OMAP2+: drop unused function ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm ARM: dts: omap5: Update CPU OPP table as per final production Manual ARM: DRA722: add detection of SoC information ARM: dts: Enable twl4030 off-idle configuration for selected omaps ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods ARM: OMAP2+: hwmod: Change hardreset soc_ops for AM43XX
| * | | | | | | | MAINTAINERS: Add few more Keystone driversSantosh Shilimkar2014-07-041-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update MAINTAINERS file for recently added reset controller, AEMIF and clocksource driver for Keystone SOCs. The EMIF memory controller driver is also added along with AEMIF. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Mike Turquette <mturquette@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | | | MAINTAINERS: merge MXS entry into IMX oneShawn Guo2014-07-041-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mach-mxs platform is actually co-maintained by myself and pengutronix folks. Also it's hosted in the same kernel tree as IMX. So let's merge the entry into IMX one. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Olof Johansson <olof@lixom.net>
OpenPOWER on IntegriCloud