summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Merge commit 'gcl/next' into nextBenjamin Herrenschmidt2010-08-04505-197378/+5760
|\
| * powerpc/5200/i2c: improve i2c bus error recoveryAlbrecht Dreß2010-08-012-22/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the recovery of the MPC's I2C bus from errors like bus hangs resulting in timeouts: 1. make the bus timeout configurable, as it depends on the bus clock and the attached slave chip(s); default is still 1 second; 2. detect any of the cases indicated by the CF, BB and RXAK MSR flags if a timeout occurs, and add a missing (required) MAL reset; 3. use a more reliable method to fixup the bus if a hang has been detected. The sequence is sent 9 times which seems to be necessary if a slave "misses" more than one clock cycle. For 400 kHz bus speed, the fixup is also ~70us (81us vs. 150us) faster. Tested on a custom Lite5200b derived board, with a Dallas RTC, AD sensors and NXP IO expander chips attached to the i2c. Changes vs. v1: - use improved bus fixup sequence for all chips (not only the 5200) - calculate real clock from defaults if no clock is given in the device tree - better description (I hope) of the changes. I didn't split the changes in this file into three parts as recommended by Grant, as they actually belong together (i.e. they address one single problem, just in three places of one single source file). Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> [grant.likely@secretlab.ca: fixup for ->node to ->dev.of_node transition] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * of/xilinxfb: update tft compatible versionsAdrian Alonso2010-08-011-0/+2
| | | | | | | | | | | | | | | | * Add tft display module compatibility for new hardware modules Signed-off-by: Adrian Alonso <aalonso00@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/fsl-diu-fb: Support setting display mode using EDIDAnatolij Gustschin2010-08-013-6/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for encoding display mode information in the device tree using verbatim EDID block. If the EDID entry in the DIU node is present, the driver will build mode database using EDID data and allow setting the display modes from this database. Otherwise display mode will be set using mode entries from driver's internal database as usual. This patch also updates device tree bindings. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindingsAnatolij Gustschin2010-08-011-2/+12
| | | | | | | | | | | | | | | | | | Update compatible and interrupt properties description. Furthermore an example for the MPC5121 has been added. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/5121: shared DIU framebuffer supportAnatolij Gustschin2010-08-017-2/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPC5121 DIU configuration/setup as initialized by the boot loader currently will get lost while booting Linux. As a result displaying the boot splash is not possible through the boot process. To prevent this we reserve configured DIU frame buffer address range while booting and preserve AOI descriptor and gamma table so that DIU continues displaying through the whole boot process. On first open from user space DIU frame buffer driver releases the reserved frame buffer area and continues to operate as usual. Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/5121: move fsl-diu-fb.h to include/linuxAnatolij Gustschin2010-08-012-1/+1
| | | | | | | | | | | | | | | | | | | | Some DIU structures will be used in platform code in subsequent MPC5121 DIU patch, so we move this header to be able to include it elsewhere. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptorAnatolij Gustschin2010-08-011-15/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On MPC5121e Rev 2.0 re-configuring the DIU area descriptor by writing new descriptor address doesn't always work. As a result, DIU continues to display using old area descriptor even if the new one has been written to the descriptor register of the plane. Add the code from Freescale MPC5121EADS BSP for writing descriptor addresses properly. This fixes the problem for Rev 2.0 silicon. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/512x: add clock structure for Video-IN (VIU) unitAnatolij Gustschin2010-08-011-0/+18
| | | | | | | | | | | | | | | | | | Allows using clk_get()/clk_enable()/clk_disable() for VIU clock in the v4l2 video driver. Signed-off-by: Hongjun Chen <hong-jun.chen@freescale.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/5121: add initial support for PDM360NG boardAnatolij Gustschin2010-08-014-0/+547
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer <markus.fischer.ec@ifm.com> Signed-off-by: Wolfgang Grandegger <wg@denx.de> Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/512x: Group mpc512x board's selection menuAnatolij Gustschin2010-08-011-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow board selection in a drop-down board sub-menu like many other platforms do. Before the patch: ... [ ] Freescale MPC5121E ADS [ ] Generic support for simple MPC5121 based boards [ ] 52xx-based boards ... Patched: ... [*] 512x-based boards [ ] Freescale MPC5121E ADS [ ] Generic support for simple MPC5121 based boards [ ] 52xx-based boards ... This is a cleanup before adding new board selection entry. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/5200: improve uart baud rate calculation (reach high baud rates, ↵Albrecht Dreß2010-07-241-29/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | better accuracy) On the MPC5200B, make very high baud rates (e.g. 3 MBaud) accessible and achieve a higher precision for high baud rates in general. This is done by selecting the appropriate prescaler (/4 or /32). As to keep the code clean, the getuartclk method has been dropped, and all calculations are done in a new set_baudrate method. Notes: only "fsl,mpc5200b-psc-uart" compatible devices benefit from these improvements. Tested on a custom 5200B based board, from 110 baud up to 3 MBaud, and with both "fsl,mpc5200b-psc-uart" and "fsl,mpc5200-psc-uart" devices. Also tested on the mpc5121ads board. Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de> [agust: fixed mpc5121 prescaler comment] Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * Linux 2.6.35-rc6v2.6.35-rc6Linus Torvalds2010-07-221-1/+1
| |
| * Merge branch 'for-linus' of ↵Linus Torvalds2010-07-228-16/+44
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - relax capability ID checks on newer hardware Input: twl40300-keypad - fix handling of "all ground" rows Input: gamecon - reference correct pad in gc_psx_command() Input: gamecon - reference correct input device in NES mode Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi' Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table Input: qt2160 - rename kconfig symbol name
| | * Input: synaptics - relax capability ID checks on newer hardwareDmitry Torokhov2010-07-212-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Older firmwares fixed the middle byte of the Synaptics capabilities query to 0x47, but starting with firmware 7.5 the middle byte represents submodel ID, sometimes also called "dash number". Reported-and-tested-by: Miroslav Šulc <fordfrog@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: twl40300-keypad - fix handling of "all ground" rowsDmitry Torokhov2010-07-202-9/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: gamecon - reference correct pad in gc_psx_command()Dmitry Torokhov2010-07-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise we won't see any events from the gamepad. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16408 Reported-and-tested-by: Eugene Yudin <eugene.yudin@gmail.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: gamecon - reference correct input device in NES modeDmitry Torokhov2010-07-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | We moved input devices from 'struct gc' to individial pads (struct gc-pad), but gc_nes_process_packet() was still trying to use old ones and crashing. Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: w90p910_keypad - change platfrom driver name to 'nuc900-kpi'Wan ZongShun2010-07-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The name of platfrom device was changed and we need to make driver's name match in order for it to bind to the device. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_tableKamal Mostafa2010-07-191-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up i8042 and breaking the touchpad. Add this model to i8042_dmi_noloop_table[] to resolve. BugLink: https://bugs.launchpad.net/bugs/580664 Signed-off-by: Kamal Mostafa <kamal@canonical.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| | * Input: qt2160 - rename kconfig symbol nameChristoph Fritz2010-07-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/input/keyboard/Kconfig defines QT2160 while the corresponding Makefile expects CONFIG_KEYBOARD_QT2160 as all other keyboard drivers do. To keep this Makefile consistent rename the config-token from CONFIG_QT2160 to CONFIG_KEYBOARD_QT2160. The various defconfig files are left alone. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | Merge branch 'drm-fixes' of ↵Linus Torvalds2010-07-227-10/+15
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add quirk to make HP DV5000 laptop resume drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctl Fix ttm_page_alloc.c build breakage drm/radeon/kms: fix legacy LVDS dpms sequence drm/radeon/kms: drop taking lock around crtc lookup.
| | * | drm/radeon/kms: add quirk to make HP DV5000 laptop resumeAlex Deucher2010-07-221-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29062 Reported-by: Andres Cimmarusti <acimmarusti@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | drm/radeon/kms: fix RADEON_INFO_CRTC_FROM_ID info ioctlAlex Deucher2010-07-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return the crtc_id, not the counter value. They are not necessarily the same. Cc: Jerome Glisse <glisse@freedesktop.org> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | Fix ttm_page_alloc.c build breakageLuck, Tony2010-07-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 1e8655f87333def92bb8215b423adc65403b08a5 drm/ttm: Fix build on architectures without AGP looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h Move the conditional inclusion of <asm/agp.h> *after* we have included ttm_bo_driver.h Signed-of-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | drm/radeon/kms: fix legacy LVDS dpms sequenceAlex Deucher2010-07-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add delay after turning off the LVDS encoder. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16389 Tested-by: Jan Kreuzer <kontrollator@gmx.de> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | drm/radeon/kms: drop taking lock around crtc lookup.Dave Airlie2010-07-223-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only add/remove crtcs at driver load, you cannot remove when the GPU is running a CS packet since the fd is open, when GPU hotplugging on radeons actually is needed all this locking needs a review and I've started re-working kms core locking to deal with this better. But for now avoid long delays in CS processing when hotplug detect is happening in a different thread. this fixes a regression introduced with hotplug detection. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2010-07-221-1/+5
| |\ \ \ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: talitos - fix bug in sg_copy_end_to_buffer
| | * | | crypto: talitos - fix bug in sg_copy_end_to_bufferLee Nipper2010-07-191-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In function sg_copy_end_to_buffer, too much data is copied when a segment in the scatterlist has .length greater than the requested copy length. This patch adds the limit checks to fix this bug of over copying, which affected only the ahash algorithms. Signed-off-by: Lee Nipper <lee.nipper@gmail.com> Acked-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
| * | | | Merge branch 'x86/auditsyscall' of ↵Linus Torvalds2010-07-221-2/+2
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/auditsyscall' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86: auditsyscall: fix fastpath return value after reschedule
| | * | | | x86: auditsyscall: fix fastpath return value after rescheduleRoland McGrath2010-07-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the CONFIG_AUDITSYSCALL fast-path for x86 64-bit system calls, we can pass a bad return value and/or error indication for the system call to audit_syscall_exit(). This happens when TIF_NEED_RESCHED was set as the system call returned, so we went out to schedule() and came back to the exit-audit fast-path. The fix is to reload the user return value register from the pt_regs before using it for audit_syscall_exit(). Both the 32-bit kernel's fast path and the 64-bit kernel's 32-bit system call fast paths work slightly differently, so that they always leave the fast path entirely to reschedule and don't return there, so they don't have the analogous bugs. Reported-by: Alexander Viro <aviro@redhat.com> Signed-off-by: Roland McGrath <roland@redhat.com>
| * | | | | Merge branch 'for_linus' of ↵Linus Torvalds2010-07-225-10/+11
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: sysrq,kdb: Use __handle_sysrq() for kdb's sysrq function debug_core,kdb: fix kgdb_connected bit set in the wrong place Fix merge regression from external kdb to upstream kdb repair gdbstub to match the gdbserial protocol specification kdb: break out of kdb_ll() when command is terminated
| | * | | | | sysrq,kdb: Use __handle_sysrq() for kdb's sysrq functionJason Wessel2010-07-213-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kdb code should not toggle the sysrq state in case an end user wants to try and resume the normal kernel execution. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| | * | | | | debug_core,kdb: fix kgdb_connected bit set in the wrong placeJason Wessel2010-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Immediately following an exit from the kdb shell the kgdb_connected variable should be set to zero, unless there are breakpoints planted. If the kgdb_connected variable is not zeroed out with kdb, it is impossible to turn off kdb. This patch is merely a work around for now, the real fix will check for the breakpoints. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
| | * | | | | Fix merge regression from external kdb to upstream kdbJason Wessel2010-07-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the process of merging kdb to the mainline, the kdb lsmod command stopped printing the base load address of kernel modules. This is needed for using kdb in conjunction with external tools such as gdb. Simply restore the functionality by adding a kdb_printf for the base load address of the kernel modules. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
| | * | | | | repair gdbstub to match the gdbserial protocol specificationJason Wessel2010-07-211-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The gdbserial protocol handler should return an empty packet instead of an error string when ever it responds to a command it does not implement. The problem cases come from a debugger client sending qTBuffer, qTStatus, qSearch, qSupported. The incorrect response from the gdbstub leads the debugger clients to not function correctly. Recent versions of gdb will not detach correctly as a result of this behavior. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
| | * | | | | kdb: break out of kdb_ll() when command is terminatedMartin Hicks2010-07-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch the "ll" linked-list traversal command won't terminate when you hit q/Q. Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
| * | | | | | CIFS: Fix a malicious redirect problem in the DNS lookup codeDavid Howells2010-07-223-5/+74
| | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the security problem in the CIFS filesystem DNS lookup code in which a malicious redirect could be installed by a random user by simply adding a result record into one of their keyrings with add_key() and then invoking a CIFS CFS lookup [CVE-2010-2524]. This is done by creating an internal keyring specifically for the caching of DNS lookups. To enforce the use of this keyring, the module init routine creates a set of override credentials with the keyring installed as the thread keyring and instructs request_key() to only install lookup result keys in that keyring. The override is then applied around the call to request_key(). This has some additional benefits when a kernel service uses this module to request a key: (1) The result keys are owned by root, not the user that caused the lookup. (2) The result keys don't pop up in the user's keyrings. (3) The result keys don't come out of the quota of the user that caused the lookup. The keyring can be viewed as root by doing cat /proc/keys: 2a0ca6c3 I----- 1 perm 1f030000 0 0 keyring .dns_resolver: 1/4 It can then be listed with 'keyctl list' by root. # keyctl list 0x2a0ca6c3 1 key in keyring: 726766307: --alswrv 0 0 dns_resolver: foo.bar.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve French <smfrench@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | Merge branch 'urgent' of ↵Linus Torvalds2010-07-211-1/+3
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix 'driver ... did not release config properly' warning
| | * | | | | pcmcia: fix 'driver ... did not release config properly' warningPatrick McHardy2010-07-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing the irq. The IRQ is now released in pcmcia_disable_device(), however p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove(). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
| * | | | | | Merge branch 'shrinker' of ↵Linus Torvalds2010-07-212-2/+2
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev * 'shrinker' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev: mm: add context argument to shrinker callback to remaining shrinkers
| | * | | | | | mm: add context argument to shrinker callback to remaining shrinkersDave Chinner2010-07-212-2/+2
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the shrinkers missed in the first conversion of the API in commit 7f8275d0d660c146de6ee3017e1e2e594c49e820 ("mm: add context argument to shrinker callback"). Signed-off-by: Dave Chinner <dchinner@redhat.com>
| * | | | | | Merge branch 'fix/asoc' of ↵Linus Torvalds2010-07-215-20/+15
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Select wm_hubs automatically for WM8994 ASoC: Remove duplicate AUX definition from WM8776 ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_register ASoC: wm8727: add a missing return in wm8727_platform_probe ASoC: fsi: fixup wrong value setting order of TDM ASoC: fsi: fixup clock inversion operation
| | * | | | | | ASoC: Select wm_hubs automatically for WM8994Chanwoo Choi2010-07-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise all machine drivers need to do so. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | | | | ASoC: Remove duplicate AUX definition from WM8776Mark Brown2010-07-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
| | * | | | | | ASoC:: remove a redundant snd_soc_unregister_codec call in wm8988_registerAxel Lin2010-07-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | snd_soc_unregister_codec is called twice if snd_soc_register_dai fail. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | | | | ASoC: wm8727: add a missing return in wm8727_platform_probeAxel Lin2010-07-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | otherwise the error path will always be executed. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | | | | ASoC: fsi: fixup wrong value setting order of TDMKuninori Morimoto2010-07-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | channel size should be set before setting register value Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| | * | | | | | ASoC: fsi: fixup clock inversion operationKuninori Morimoto2010-07-131-14/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clock inversion should be specified by each flags bit. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | | | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2010-07-2115-33/+103
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: math-emu: correct test for downshifting fraction in _FP_FROM_INT() perf: Add DWARF register lookup for sparc MAINTAINERS: Add SBUS driver path to sparc entry. drivers/sbus: Remove unnecessary casts of private_data sparc: remove homegrown L1_CACHE_ALIGN macro sparc64: fix the build error due to smp_kgdb_capture_client() sparc64: Fix maybe_change_configuration() PCR setting. arch/sparc/kernel: Eliminate what looks like a NULL pointer dereference sparc64: Update defconfig. sunsu: Fix use after free in su_remove(). sunserial: Don't call add_preferred_console() when console= is specified. sparc32: Kill none_mask, it's bogus.
OpenPOWER on IntegriCloud