diff options
Diffstat (limited to 'tools/testing/selftests/net/pmtu.sh')
| -rwxr-xr-x | tools/testing/selftests/net/pmtu.sh | 455 |
1 files changed, 430 insertions, 25 deletions
diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh index a369d616b390..912b2dc50be3 100755 --- a/tools/testing/selftests/net/pmtu.sh +++ b/tools/testing/selftests/net/pmtu.sh @@ -26,6 +26,47 @@ # - pmtu_ipv6 # Same as pmtu_ipv4, except for locked PMTU tests, using IPv6 # +# - pmtu_ipv4_vxlan4_exception +# Set up the same network topology as pmtu_ipv4, create a VXLAN tunnel +# over IPv4 between A and B, routed via R1. On the link between R1 and B, +# set a MTU lower than the VXLAN MTU and the MTU on the link between A and +# R1. Send IPv4 packets, exceeding the MTU between R1 and B, over VXLAN +# from A to B and check that the PMTU exception is created with the right +# value on A +# +# - pmtu_ipv6_vxlan4_exception +# Same as pmtu_ipv4_vxlan4_exception, but send IPv6 packets from A to B +# +# - pmtu_ipv4_vxlan6_exception +# Same as pmtu_ipv4_vxlan4_exception, but use IPv6 transport from A to B +# +# - pmtu_ipv6_vxlan6_exception +# Same as pmtu_ipv4_vxlan6_exception, but send IPv6 packets from A to B +# +# - pmtu_ipv4_geneve4_exception +# Same as pmtu_ipv4_vxlan4_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv6_geneve4_exception +# Same as pmtu_ipv6_vxlan4_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv4_geneve6_exception +# Same as pmtu_ipv4_vxlan6_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv6_geneve6_exception +# Same as pmtu_ipv6_vxlan6_exception, but using a GENEVE tunnel instead of +# VXLAN +# +# - pmtu_ipv{4,6}_fou{4,6}_exception +# Same as pmtu_ipv4_vxlan4, but using a direct IPv4/IPv6 encapsulation +# (FoU) over IPv4/IPv6, instead of VXLAN +# +# - pmtu_ipv{4,6}_fou{4,6}_exception +# Same as pmtu_ipv4_vxlan4, but using a generic UDP IPv4/IPv6 +# encapsulation (GUE) over IPv4/IPv6, instead of VXLAN +# # - pmtu_vti4_exception # Set up vti tunnel on top of veth, with xfrm states and policies, in two # namespaces with matching endpoints. Check that route exception is not @@ -62,6 +103,15 @@ # and check that configured MTU is used on link creation and changes, and # that MTU is properly calculated instead when MTU is not configured from # userspace +# +# - cleanup_ipv4_exception +# Similar to pmtu_ipv4_vxlan4_exception, but explicitly generate PMTU +# exceptions on multiple CPUs and check that the veth device tear-down +# happens in a timely manner +# +# - cleanup_ipv6_exception +# Same as above, but use IPv6 transport from A to B + # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -72,13 +122,31 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) tests=" pmtu_ipv4_exception ipv4: PMTU exceptions pmtu_ipv6_exception ipv6: PMTU exceptions + pmtu_ipv4_vxlan4_exception IPv4 over vxlan4: PMTU exceptions + pmtu_ipv6_vxlan4_exception IPv6 over vxlan4: PMTU exceptions + pmtu_ipv4_vxlan6_exception IPv4 over vxlan6: PMTU exceptions + pmtu_ipv6_vxlan6_exception IPv6 over vxlan6: PMTU exceptions + pmtu_ipv4_geneve4_exception IPv4 over geneve4: PMTU exceptions + pmtu_ipv6_geneve4_exception IPv6 over geneve4: PMTU exceptions + pmtu_ipv4_geneve6_exception IPv4 over geneve6: PMTU exceptions + pmtu_ipv6_geneve6_exception IPv6 over geneve6: PMTU exceptions + pmtu_ipv4_fou4_exception IPv4 over fou4: PMTU exceptions + pmtu_ipv6_fou4_exception IPv6 over fou4: PMTU exceptions + pmtu_ipv4_fou6_exception IPv4 over fou6: PMTU exceptions + pmtu_ipv6_fou6_exception IPv6 over fou6: PMTU exceptions + pmtu_ipv4_gue4_exception IPv4 over gue4: PMTU exceptions + pmtu_ipv6_gue4_exception IPv6 over gue4: PMTU exceptions + pmtu_ipv4_gue6_exception IPv4 over gue6: PMTU exceptions + pmtu_ipv6_gue6_exception IPv6 over gue6: PMTU exceptions pmtu_vti6_exception vti6: PMTU exceptions pmtu_vti4_exception vti4: PMTU exceptions pmtu_vti4_default_mtu vti4: default MTU assignment pmtu_vti6_default_mtu vti6: default MTU assignment pmtu_vti4_link_add_mtu vti4: MTU setting on link creation pmtu_vti6_link_add_mtu vti6: MTU setting on link creation - pmtu_vti6_link_change_mtu vti6: MTU changes on link changes" + pmtu_vti6_link_change_mtu vti6: MTU changes on link changes + cleanup_ipv4_exception ipv4: cleanup of cached exceptions + cleanup_ipv6_exception ipv6: cleanup of cached exceptions" NS_A="ns-$(mktemp -u XXXXXX)" NS_B="ns-$(mktemp -u XXXXXX)" @@ -95,8 +163,8 @@ ns_r2="ip netns exec ${NS_R2}" # Addresses are: # - IPv4: PREFIX4.SEGMENT.ID (/24) # - IPv6: PREFIX6:SEGMENT::ID (/64) -prefix4="192.168" -prefix6="fd00" +prefix4="10.0" +prefix6="fc00" a_r1=1 a_r2=2 b_r1=3 @@ -129,12 +197,12 @@ veth6_a_addr="fd00:1::a" veth6_b_addr="fd00:1::b" veth6_mask="64" -vti4_a_addr="192.168.2.1" -vti4_b_addr="192.168.2.2" -vti4_mask="24" -vti6_a_addr="fd00:2::a" -vti6_b_addr="fd00:2::b" -vti6_mask="64" +tunnel4_a_addr="192.168.2.1" +tunnel4_b_addr="192.168.2.2" +tunnel4_mask="24" +tunnel6_a_addr="fd00:2::a" +tunnel6_b_addr="fd00:2::b" +tunnel6_mask="64" dummy6_0_addr="fc00:1000::0" dummy6_1_addr="fc00:1001::0" @@ -159,9 +227,94 @@ nsname() { eval echo \$NS_$1 } +setup_fou_or_gue() { + outer="${1}" + inner="${2}" + encap="${3}" + + if [ "${outer}" = "4" ]; then + modprobe fou || return 2 + a_addr="${prefix4}.${a_r1}.1" + b_addr="${prefix4}.${b_r1}.1" + if [ "${inner}" = "4" ]; then + type="ipip" + ipproto="4" + else + type="sit" + ipproto="41" + fi + else + modprobe fou6 || return 2 + a_addr="${prefix6}:${a_r1}::1" + b_addr="${prefix6}:${b_r1}::1" + if [ "${inner}" = "4" ]; then + type="ip6tnl" + mode="mode ipip6" + ipproto="4 -6" + else + type="ip6tnl" + mode="mode ip6ip6" + ipproto="41 -6" + fi + fi + + ${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2 + ${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2 + + ${ns_b} ip fou add port 5556 ipproto ${ipproto} + ${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555 + + if [ "${inner}" = "4" ]; then + ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a + ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b + else + ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a + ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b + fi + + ${ns_a} ip link set ${encap}_a up + ${ns_b} ip link set ${encap}_b up +} + +setup_fou44() { + setup_fou_or_gue 4 4 fou +} + +setup_fou46() { + setup_fou_or_gue 4 6 fou +} + +setup_fou64() { + setup_fou_or_gue 6 4 fou +} + +setup_fou66() { + setup_fou_or_gue 6 6 fou +} + +setup_gue44() { + setup_fou_or_gue 4 4 gue +} + +setup_gue46() { + setup_fou_or_gue 4 6 gue +} + +setup_gue64() { + setup_fou_or_gue 6 4 gue +} + +setup_gue66() { + setup_fou_or_gue 6 6 gue +} + setup_namespaces() { for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do ip netns add ${n} || return 1 + + # Disable DAD, so that we don't have to wait to use the + # configured IPv6 addresses + ip netns exec ${n} sysctl -q net/ipv6/conf/default/accept_dad=0 done } @@ -197,16 +350,58 @@ setup_vti() { ${ns_a} ip link set vti${proto}_a up ${ns_b} ip link set vti${proto}_b up - - sleep 1 } setup_vti4() { - setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${vti4_a_addr} ${vti4_b_addr} ${vti4_mask} + setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${tunnel4_a_addr} ${tunnel4_b_addr} ${tunnel4_mask} } setup_vti6() { - setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${vti6_a_addr} ${vti6_b_addr} ${vti6_mask} + setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${tunnel6_a_addr} ${tunnel6_b_addr} ${tunnel6_mask} +} + +setup_vxlan_or_geneve() { + type="${1}" + a_addr="${2}" + b_addr="${3}" + opts="${4}" + + if [ "${type}" = "vxlan" ]; then + opts="${opts} ttl 64 dstport 4789" + opts_a="local ${a_addr}" + opts_b="local ${b_addr}" + else + opts_a="" + opts_b="" + fi + + ${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1 + ${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts} + + ${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a + ${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b + + ${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a + ${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b + + ${ns_a} ip link set ${type}_a up + ${ns_b} ip link set ${type}_b up +} + +setup_geneve4() { + setup_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set" +} + +setup_vxlan4() { + setup_vxlan_or_geneve vxlan ${prefix4}.${a_r1}.1 ${prefix4}.${b_r1}.1 "df set" +} + +setup_geneve6() { + setup_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 +} + +setup_vxlan6() { + setup_vxlan_or_geneve vxlan ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1 } setup_xfrm() { @@ -402,8 +597,8 @@ test_pmtu_ipvX() { mtu "${ns_b}" veth_B-R2 1500 # Create route exceptions - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst1} > /dev/null - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1800 ${dst2} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst1} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1800 ${dst2} > /dev/null # Check that exceptions have been created with the correct PMTU pmtu_1="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst1})" @@ -435,7 +630,7 @@ test_pmtu_ipvX() { # Decrease remote MTU on path via R2, get new exception mtu "${ns_r2}" veth_R2-B 400 mtu "${ns_b}" veth_B-R2 400 - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 @@ -452,7 +647,7 @@ test_pmtu_ipvX() { check_pmtu_value "1500" "${pmtu_2}" "increasing local MTU" || return 1 # Get new exception - ${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s 1400 ${dst2} > /dev/null + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s 1400 ${dst2} > /dev/null pmtu_2="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst2})" check_pmtu_value "lock 552" "${pmtu_2}" "exceeding MTU, with MTU < min_pmtu" || return 1 } @@ -465,6 +660,161 @@ test_pmtu_ipv6_exception() { test_pmtu_ipvX 6 } +test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() { + type=${1} + family=${2} + outer_family=${3} + ll_mtu=4000 + + if [ ${outer_family} -eq 4 ]; then + setup namespaces routing ${type}4 || return 2 + # IPv4 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 20 - 8 - 8 - 14)) + else + setup namespaces routing ${type}6 || return 2 + # IPv6 header UDP header VXLAN/GENEVE header Ethernet header + exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - 14)) + fi + + trace "${ns_a}" ${type}_a "${ns_b}" ${type}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + if [ ${family} -eq 4 ]; then + ping=ping + dst=${tunnel4_b_addr} + else + ping=${ping6} + dst=${tunnel6_b_addr} + fi + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000)) + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null + + # Check that exception was created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${type} interface" +} + +test_pmtu_ipv4_vxlan4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 4 4 +} + +test_pmtu_ipv6_vxlan4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 6 4 +} + +test_pmtu_ipv4_geneve4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 4 +} + +test_pmtu_ipv6_geneve4_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 4 +} + +test_pmtu_ipv4_vxlan6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 4 6 +} + +test_pmtu_ipv6_vxlan6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan 6 6 +} + +test_pmtu_ipv4_geneve6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 6 +} + +test_pmtu_ipv6_geneve6_exception() { + test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 6 +} + +test_pmtu_ipvX_over_fouY_or_gueY() { + inner_family=${1} + outer_family=${2} + encap=${3} + ll_mtu=4000 + + setup namespaces routing ${encap}${outer_family}${inner_family} || return 2 + trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + if [ ${inner_family} -eq 4 ]; then + ping=ping + dst=${tunnel4_b_addr} + else + ping=${ping6} + dst=${tunnel6_b_addr} + fi + + if [ "${encap}" = "gue" ]; then + encap_overhead=4 + else + encap_overhead=0 + fi + + if [ ${outer_family} -eq 4 ]; then + # IPv4 header UDP header + exp_mtu=$((${ll_mtu} - 20 - 8 - ${encap_overhead})) + else + # IPv6 header Option 4 UDP header + exp_mtu=$((${ll_mtu} - 40 - 8 - 8 - ${encap_overhead})) + fi + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000)) + ${ns_a} ${ping} -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${dst} > /dev/null + + # Check that exception was created + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})" + check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${encap} interface" +} + +test_pmtu_ipv4_fou4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 4 fou +} + +test_pmtu_ipv6_fou4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 4 fou +} + +test_pmtu_ipv4_fou6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 6 fou +} + +test_pmtu_ipv6_fou6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 6 fou +} + +test_pmtu_ipv4_gue4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 4 gue +} + +test_pmtu_ipv6_gue4_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 4 gue +} + +test_pmtu_ipv4_gue6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 4 6 gue +} + +test_pmtu_ipv6_gue6_exception() { + test_pmtu_ipvX_over_fouY_or_gueY 6 6 gue +} + test_pmtu_vti4_exception() { setup namespaces veth vti4 xfrm4 || return 2 trace "${ns_a}" veth_a "${ns_b}" veth_b \ @@ -484,14 +834,14 @@ test_pmtu_vti4_exception() { # Send DF packet without exceeding link layer MTU, check that no # exception is created - ${ns_a} ping -q -M want -i 0.1 -w 2 -s ${ping_payload} ${vti4_b_addr} > /dev/null - pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti4_b_addr})" + ${ns_a} ping -q -M want -i 0.1 -w 1 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1 # Now exceed link layer MTU by one byte, check that exception is created # with the right PMTU value - ${ns_a} ping -q -M want -i 0.1 -w 2 -s $((ping_payload + 1)) ${vti4_b_addr} > /dev/null - pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti4_b_addr})" + ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})" check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))" } @@ -506,20 +856,20 @@ test_pmtu_vti6_exception() { mtu "${ns_b}" veth_b 4000 mtu "${ns_a}" vti6_a 5000 mtu "${ns_b}" vti6_b 5000 - ${ns_a} ${ping6} -q -i 0.1 -w 2 -s 60000 ${vti6_b_addr} > /dev/null + ${ns_a} ${ping6} -q -i 0.1 -w 1 -s 60000 ${tunnel6_b_addr} > /dev/null # Check that exception was created - pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})" + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" check_pmtu_value any "${pmtu}" "creating tunnel exceeding link layer MTU" || return 1 # Decrease tunnel MTU, check for PMTU decrease in route exception mtu "${ns_a}" vti6_a 3000 - pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})" + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" check_pmtu_value "3000" "${pmtu}" "decreasing tunnel MTU" || fail=1 # Increase tunnel MTU, check for PMTU increase in route exception mtu "${ns_a}" vti6_a 9000 - pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})" + pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})" check_pmtu_value "9000" "${pmtu}" "increasing tunnel MTU" || fail=1 return ${fail} @@ -667,6 +1017,61 @@ test_pmtu_vti6_link_change_mtu() { return ${fail} } +check_command() { + cmd=${1} + + if ! which ${cmd} > /dev/null 2>&1; then + err " missing required command: '${cmd}'" + return 1 + fi + return 0 +} + +test_cleanup_vxlanX_exception() { + outer="${1}" + encap="vxlan" + ll_mtu=4000 + + check_command taskset || return 2 + cpu_list=$(grep -m 2 processor /proc/cpuinfo | cut -d ' ' -f 2) + + setup namespaces routing ${encap}${outer} || return 2 + trace "${ns_a}" ${encap}_a "${ns_b}" ${encap}_b \ + "${ns_a}" veth_A-R1 "${ns_r1}" veth_R1-A \ + "${ns_b}" veth_B-R1 "${ns_r1}" veth_R1-B + + # Create route exception by exceeding link layer MTU + mtu "${ns_a}" veth_A-R1 $((${ll_mtu} + 1000)) + mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000)) + mtu "${ns_b}" veth_B-R1 ${ll_mtu} + mtu "${ns_r1}" veth_R1-B ${ll_mtu} + + mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000)) + mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000)) + + # Fill exception cache for multiple CPUs (2) + # we can always use inner IPv4 for that + for cpu in ${cpu_list}; do + taskset --cpu-list ${cpu} ${ns_a} ping -q -M want -i 0.1 -w 1 -s $((${ll_mtu} + 500)) ${tunnel4_b_addr} > /dev/null + done + + ${ns_a} ip link del dev veth_A-R1 & + iplink_pid=$! + sleep 1 + if [ "$(cat /proc/${iplink_pid}/cmdline 2>/dev/null | tr -d '\0')" = "iplinkdeldevveth_A-R1" ]; then + err " can't delete veth device in a timely manner, PMTU dst likely leaked" + return 1 + fi +} + +test_cleanup_ipv6_exception() { + test_cleanup_vxlanX_exception 6 +} + +test_cleanup_ipv4_exception() { + test_cleanup_vxlanX_exception 4 +} + usage() { echo echo "$0 [OPTIONS] [TEST]..." |
