diff options
Diffstat (limited to 'tools/include/uapi/linux/bpf.h')
| -rw-r--r-- | tools/include/uapi/linux/bpf.h | 687 |
1 files changed, 579 insertions, 108 deletions
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 929c8e537a14..dbbcf0b02970 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -105,6 +105,8 @@ enum bpf_cmd { BPF_BTF_GET_FD_BY_ID, BPF_TASK_FD_QUERY, BPF_MAP_LOOKUP_AND_DELETE_ELEM, + BPF_MAP_FREEZE, + BPF_BTF_GET_NEXT_ID, }; enum bpf_map_type { @@ -132,6 +134,8 @@ enum bpf_map_type { BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, BPF_MAP_TYPE_QUEUE, BPF_MAP_TYPE_STACK, + BPF_MAP_TYPE_SK_STORAGE, + BPF_MAP_TYPE_DEVMAP_HASH, }; /* Note that tracing related programs such as @@ -166,6 +170,10 @@ enum bpf_prog_type { BPF_PROG_TYPE_LIRC_MODE2, BPF_PROG_TYPE_SK_REUSEPORT, BPF_PROG_TYPE_FLOW_DISSECTOR, + BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + BPF_PROG_TYPE_CGROUP_SOCKOPT, + BPF_PROG_TYPE_TRACING, }; enum bpf_attach_type { @@ -187,6 +195,14 @@ enum bpf_attach_type { BPF_CGROUP_UDP6_SENDMSG, BPF_LIRC_MODE2, BPF_FLOW_DISSECTOR, + BPF_CGROUP_SYSCTL, + BPF_CGROUP_UDP4_RECVMSG, + BPF_CGROUP_UDP6_RECVMSG, + BPF_CGROUP_GETSOCKOPT, + BPF_CGROUP_SETSOCKOPT, + BPF_TRACE_RAW_TP, + BPF_TRACE_FENTRY, + BPF_TRACE_FEXIT, __MAX_BPF_ATTACH_TYPE }; @@ -255,8 +271,40 @@ enum bpf_attach_type { */ #define BPF_F_ANY_ALIGNMENT (1U << 1) -/* when bpf_ldimm64->src_reg == BPF_PSEUDO_MAP_FD, bpf_ldimm64->imm == fd */ +/* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose. + * Verifier does sub-register def/use analysis and identifies instructions whose + * def only matters for low 32-bit, high 32-bit is never referenced later + * through implicit zero extension. Therefore verifier notifies JIT back-ends + * that it is safe to ignore clearing high 32-bit for these instructions. This + * saves some back-ends a lot of code-gen. However such optimization is not + * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends + * hence hasn't used verifier's analysis result. But, we really want to have a + * way to be able to verify the correctness of the described optimization on + * x86_64 on which testsuites are frequently exercised. + * + * So, this flag is introduced. Once it is set, verifier will randomize high + * 32-bit for those instructions who has been identified as safe to ignore them. + * Then, if verifier is not doing correct analysis, such randomization will + * regress tests to expose bugs. + */ +#define BPF_F_TEST_RND_HI32 (1U << 2) + +/* The verifier internal test flag. Behavior is undefined */ +#define BPF_F_TEST_STATE_FREQ (1U << 3) + +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * two extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_FD BPF_PSEUDO_MAP_VALUE + * insn[0].imm: map fd map fd + * insn[1].imm: 0 offset into value + * insn[0].off: 0 0 + * insn[1].off: 0 0 + * ldimm64 rewrite: address of map address of map[0]+offset + * verifier type: CONST_PTR_TO_MAP PTR_TO_MAP_VALUE + */ #define BPF_PSEUDO_MAP_FD 1 +#define BPF_PSEUDO_MAP_VALUE 2 /* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative * offset to another bpf function @@ -283,7 +331,7 @@ enum bpf_attach_type { #define BPF_OBJ_NAME_LEN 16U -/* Flags for accessing BPF object */ +/* Flags for accessing BPF object from syscall side. */ #define BPF_F_RDONLY (1U << 3) #define BPF_F_WRONLY (1U << 4) @@ -293,6 +341,16 @@ enum bpf_attach_type { /* Zero-initialize hash function seed. This should only be used for testing. */ #define BPF_F_ZERO_SEED (1U << 6) +/* Flags for accessing BPF object from program side. */ +#define BPF_F_RDONLY_PROG (1U << 7) +#define BPF_F_WRONLY_PROG (1U << 8) + +/* Clone map from listener for newly accepted socket */ +#define BPF_F_CLONE (1U << 9) + +/* Enable memory-mapping BPF map */ +#define BPF_F_MMAPABLE (1U << 10) + /* flags for BPF_PROG_QUERY */ #define BPF_F_QUERY_EFFECTIVE (1U << 0) @@ -369,6 +427,8 @@ union bpf_attr { __u32 line_info_rec_size; /* userspace bpf_line_info size */ __aligned_u64 line_info; /* line info */ __u32 line_info_cnt; /* number of bpf_line_info records */ + __u32 attach_btf_id; /* in-kernel BTF type id to attach to */ + __u32 attach_prog_fd; /* 0 to attach to vmlinux */ }; struct { /* anonymous struct used by BPF_OBJ_* commands */ @@ -396,6 +456,13 @@ union bpf_attr { __aligned_u64 data_out; __u32 repeat; __u32 duration; + __u32 ctx_size_in; /* input: len of ctx_in */ + __u32 ctx_size_out; /* input/output: len of ctx_out + * returns ENOSPC if ctx_out + * is too small. + */ + __aligned_u64 ctx_in; + __aligned_u64 ctx_out; } test; struct { /* anonymous struct used by BPF_*_GET_*_ID */ @@ -502,10 +569,13 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_probe_read(void *dst, u32 size, const void *src) + * int bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr) * Description * For tracing programs, safely attempt to read *size* bytes from - * address *src* and store the data in *dst*. + * kernel space address *unsafe_ptr* and store the data in *dst*. + * + * Generally, use bpf_probe_read_user() or bpf_probe_read_kernel() + * instead. * Return * 0 on success, or a negative error in case of failure. * @@ -525,6 +595,8 @@ union bpf_attr { * limited to five). * * Each time the helper is called, it appends a line to the trace. + * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is + * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this. * The format of the trace is customizable, and the exact output * one will get depends on the options set in * *\/sys/kernel/debug/tracing/trace_options* (see also the @@ -602,7 +674,7 @@ union bpf_attr { * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ * **->swhash** and *skb*\ **->l4hash** to 0). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -627,7 +699,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -659,7 +731,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -714,7 +786,7 @@ union bpf_attr { * efficient, but it is handled through an action code where the * redirection happens only after the eBPF program has returned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -734,7 +806,7 @@ union bpf_attr { * A 64-bit integer containing the current GID and UID, and * created as such: *current_gid* **<< 32 \|** *current_uid*. * - * int bpf_get_current_comm(char *buf, u32 size_of_buf) + * int bpf_get_current_comm(void *buf, u32 size_of_buf) * Description * Copy the **comm** attribute of the current task into *buf* of * *size_of_buf*. The **comm** attribute contains the name of @@ -756,7 +828,7 @@ union bpf_attr { * based on a user-provided identifier for all traffic coming from * the tasks belonging to the related cgroup. See also the related * kernel documentation, available from the Linux sources in file - * *Documentation/cgroup-v1/net_cls.txt*. + * *Documentation/admin-guide/cgroup-v1/net_cls.rst*. * * The Linux kernel has two versions for cgroups: there are * cgroups v1 and cgroups v2. Both are available to users, who can @@ -779,7 +851,7 @@ union bpf_attr { * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to * be **ETH_P_8021Q**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -791,7 +863,7 @@ union bpf_attr { * Description * Pop a VLAN header from the packet associated to *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -963,7 +1035,7 @@ union bpf_attr { * The realm of the route for the packet associated to *skb*, or 0 * if none was found. * - * int bpf_perf_event_output(struct pt_reg *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * int bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) * Description * Write raw *data* blob into a special BPF perf event held by * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf @@ -1008,7 +1080,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_skb_load_bytes(const struct sk_buff *skb, u32 offset, void *to, u32 len) + * int bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len) * Description * This helper was provided as an easy way to load data from a * packet. It can be used to load *len* bytes from *offset* from @@ -1025,7 +1097,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_get_stackid(struct pt_reg *ctx, struct bpf_map *map, u64 flags) + * int bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags) * Description * Walk a user or a kernel stack and return its id. To achieve * this, the helper needs *ctx*, which is a pointer to the context @@ -1094,7 +1166,7 @@ union bpf_attr { * The checksum result, or a negative error code in case of * failure. * - * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size) + * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) * Description * Retrieve tunnel options metadata for the packet associated to * *skb*, and store the raw tunnel option data to the buffer *opt* @@ -1112,7 +1184,7 @@ union bpf_attr { * Return * The size of the option data retrieved. * - * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size) + * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) * Description * Set tunnel options metadata for the packet associated to *skb* * to the option data contained in the raw buffer *opt* of *size*. @@ -1141,7 +1213,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1254,7 +1326,7 @@ union bpf_attr { * implicitly linearizes, unclones and drops offloads from the * *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1290,7 +1362,7 @@ union bpf_attr { * **bpf_skb_pull_data()** to effectively unclone the *skb* from * the very beginning in case it is indeed cloned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1342,7 +1414,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1357,7 +1429,7 @@ union bpf_attr { * can be used to prepare the packet for pushing or popping * headers. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1365,45 +1437,14 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_probe_read_str(void *dst, int size, const void *unsafe_ptr) + * int bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr) * Description - * Copy a NUL terminated string from an unsafe address - * *unsafe_ptr* to *dst*. The *size* should include the - * terminating NUL byte. In case the string length is smaller than - * *size*, the target is not padded with further NUL bytes. If the - * string length is larger than *size*, just *size*-1 bytes are - * copied and the last byte is set to NUL. - * - * On success, the length of the copied string is returned. This - * makes this helper useful in tracing programs for reading - * strings, and more importantly to get its length at runtime. See - * the following snippet: - * - * :: + * Copy a NUL terminated string from an unsafe kernel address + * *unsafe_ptr* to *dst*. See bpf_probe_read_kernel_str() for + * more details. * - * SEC("kprobe/sys_open") - * void bpf_sys_open(struct pt_regs *ctx) - * { - * char buf[PATHLEN]; // PATHLEN is defined to 256 - * int res = bpf_probe_read_str(buf, sizeof(buf), - * ctx->di); - * - * // Consume buf, for example push it to - * // userspace via bpf_perf_event_output(); we - * // can use res (the string length) as event - * // size, after checking its boundaries. - * } - * - * In comparison, using **bpf_probe_read()** helper here instead - * to read the string would require to estimate the length at - * compile time, and would often result in copying more memory - * than necessary. - * - * Another useful use case is when parsing individual process - * arguments or individual environment variables navigating - * *current*\ **->mm->arg_start** and *current*\ - * **->mm->env_start**: using this helper and the return value, - * one can quickly iterate at the right offset of the memory area. + * Generally, use bpf_probe_read_user_str() or bpf_probe_read_kernel_str() + * instead. * Return * On success, the strictly positive length of the string, * including the trailing NUL character. On error, a negative @@ -1416,8 +1457,8 @@ union bpf_attr { * If no cookie has been set yet, generate a new cookie. Once * generated, the socket cookie remains stable for the life of the * socket. This helper can be useful for monitoring per socket - * networking traffic statistics as it provides a unique socket - * identifier per namespace. + * networking traffic statistics as it provides a global socket + * identifier that can be assumed unique. * Return * A 8-byte long non-decreasing number on success, or 0 if the * socket field is missing inside *skb*. @@ -1451,7 +1492,7 @@ union bpf_attr { * Return * 0 * - * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen) + * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen) * Description * Emulate a call to **setsockopt()** on the socket associated to * *bpf_socket*, which must be a full socket. The *level* at @@ -1478,15 +1519,33 @@ union bpf_attr { * Grow or shrink the room for data in the packet associated to * *skb* by *len_diff*, and according to the selected *mode*. * - * There is a single supported mode at this time: + * There are two supported modes at this time: + * + * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer + * (room space is added or removed below the layer 2 header). * * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer * (room space is added or removed below the layer 3 header). * - * All values for *flags* are reserved for future usage, and must - * be left at zero. + * The following flags are supported at this time: + * + * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. + * Adjusting mss in this way is not allowed for datagrams. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: + * Any new space is reserved to hold a tunnel header. + * Configure skb offsets and other fields accordingly. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: + * Use with ENCAP_L3 flags to further specify the tunnel type. * - * A call to this helper is susceptible to change the underlaying + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; *len* is the length of the inner MAC header. + * + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1503,8 +1562,11 @@ union bpf_attr { * but this is only implemented for native XDP (with driver * support) as of this writing). * - * All values for *flags* are reserved for future usage, and must - * be left at zero. + * The lower two bits of *flags* are used as the return code if + * the map lookup fails. This is so that the return value can be + * one of the XDP program return codes up to XDP_TX, as chosen by + * the caller. Any higher bits in the *flags* argument must be + * unset. * * When used to redirect packets to net devices, this helper * provides a high performance increase over **bpf_redirect**\ (). @@ -1514,7 +1576,7 @@ union bpf_attr { * Return * **XDP_REDIRECT** on success, or **XDP_ABORTED** on error. * - * int bpf_sk_redirect_map(struct bpf_map *map, u32 key, u64 flags) + * int bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags) * Description * Redirect the packet to the socket referenced by *map* (of type * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and @@ -1565,7 +1627,7 @@ union bpf_attr { * more flexibility as the user is free to store whatever meta * data they need. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1634,7 +1696,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen) + * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen) * Description * Emulate a call to **getsockopt()** on the socket associated to * *bpf_socket*, which must be a full socket. The *level* at @@ -1653,7 +1715,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_override_return(struct pt_reg *regs, u64 rc) + * int bpf_override_return(struct pt_regs *regs, u64 rc) * Description * Used for error injection, this helper uses kprobes to override * the return value of the probed function, and to set it to *rc*. @@ -1694,11 +1756,19 @@ union bpf_attr { * error if an eBPF program tries to set a callback that is not * supported in the current kernel. * - * The supported callback values that *argval* can combine are: + * *argval* is a flag array which can combine these flags: * * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) + * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT) + * + * Therefore, this function can be used to clear a callback flag by + * setting the appropriate bit to zero. e.g. to disable the RTO + * callback: + * + * **bpf_sock_ops_cb_flags_set(bpf_sock,** + * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** * * Here are some examples of where one could call such eBPF * program: @@ -1800,7 +1870,7 @@ union bpf_attr { * copied if necessary (i.e. if data was not linear and if start * and end pointers do not point to the same chunk). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1834,7 +1904,7 @@ union bpf_attr { * only possible to shrink the packet as of this writing, * therefore *delta* must be a negative integer. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1858,7 +1928,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_get_stack(struct pt_regs *regs, void *buf, u32 size, u64 flags) + * int bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags) * Description * Return a user or a kernel stack in bpf program provided buffer. * To achieve this, the helper needs *ctx*, which is a pointer @@ -1891,7 +1961,7 @@ union bpf_attr { * A non-negative value equal to or less than *size* on success, * or a negative error in case of failure. * - * int bpf_skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header) + * int bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) * Description * This helper is similar to **bpf_skb_load_bytes**\ () in that * it provides an easy way to load *len* bytes from *offset* @@ -1944,7 +2014,7 @@ union bpf_attr { * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the * packet is not forwarded or needs assist from full stack * - * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) + * int bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) * Description * Add an entry to, or update a sockhash *map* referencing sockets. * The *skops* is used as a new value for the entry associated to @@ -2009,18 +2079,18 @@ union bpf_attr { * **BPF_LWT_ENCAP_IP** * IP encapsulation (GRE/GUE/IPIP/etc). The outer header * must be IPv4 or IPv6, followed by zero or more - * additional headers, up to LWT_BPF_MAX_HEADROOM total - * bytes in all prepended headers. Please note that - * if skb_is_gso(skb) is true, no more than two headers - * can be prepended, and the inner header, if present, - * should be either GRE or UDP/GUE. - * - * BPF_LWT_ENCAP_SEG6*** types can be called by bpf programs of - * type BPF_PROG_TYPE_LWT_IN; BPF_LWT_ENCAP_IP type can be called - * by bpf programs of types BPF_PROG_TYPE_LWT_IN and - * BPF_PROG_TYPE_LWT_XMIT. - * - * A call to this helper is susceptible to change the underlaying + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2035,7 +2105,7 @@ union bpf_attr { * inside the outermost IPv6 Segment Routing Header can be * modified through this helper. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2051,7 +2121,7 @@ union bpf_attr { * after the segments are accepted. *delta* can be as well * positive (growing) as negative (shrinking). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2074,13 +2144,13 @@ union bpf_attr { * Type of *param*: **int**. * **SEG6_LOCAL_ACTION_END_B6** * End.B6 action: Endpoint bound to an SRv6 policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * **SEG6_LOCAL_ACTION_END_B6_ENCAP** * End.B6.Encap action: Endpoint bound to an SRv6 * encapsulation policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2233,7 +2303,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) * Description @@ -2269,7 +2340,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * int bpf_sk_release(struct bpf_sock *sock) * Description @@ -2301,7 +2373,7 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_msg_push_data(struct sk_buff *skb, u32 start, u32 len, u64 flags) + * int bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) * Description * For socket policies, insert *len* bytes into *msg* at offset * *start*. @@ -2317,9 +2389,9 @@ union bpf_attr { * Return * 0 on success, or a negative error in case of failure. * - * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 pop, u64 flags) + * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) * Description - * Will remove *pop* bytes from a *msg* starting at byte *start*. + * Will remove *len* bytes from a *msg* starting at byte *start*. * This may result in **ENOMEM** errors under certain situations if * an allocation and copy are required due to a full ring buffer. * However, the helper will try to avoid doing the allocation @@ -2414,7 +2486,7 @@ union bpf_attr { * A **struct bpf_tcp_sock** pointer on success, or **NULL** in * case of failure. * - * int bpf_skb_ecn_set_ce(struct sk_buf *skb) + * int bpf_skb_ecn_set_ce(struct sk_buff *skb) * Description * Set ECN (Explicit Congestion Notification) field of IP header * to **CE** (Congestion Encountered) if current value is **ECT** @@ -2431,6 +2503,324 @@ union bpf_attr { * Return * A **struct bpf_sock** pointer on success, or **NULL** in * case of failure. + * + * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * int bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains **sizeof**\ (**struct tcphdr**). + * + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. + * + * int bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) + * Description + * Get name of sysctl in /proc/sys/ and copy it into provided by + * program buffer *buf* of size *buf_len*. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * + * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is + * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name + * only (e.g. "tcp_mem"). + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * int bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get current value of sysctl as it is presented in /proc/sys + * (incl. newline, etc), and copy it as a string into provided + * by program buffer *buf* of size *buf_len*. + * + * The whole value is copied, no matter what file position user + * space issued e.g. sys_read at. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if current value was unavailable, e.g. because + * sysctl is uninitialized and read returns -EIO for it. + * + * int bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get new value being written by user space to sysctl (before + * the actual write happens) and copy it as a string into + * provided by program buffer *buf* of size *buf_len*. + * + * User space may write new value at file position > 0. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) + * Description + * Override new value being written by user space to sysctl with + * value provided by program in buffer *buf* of size *buf_len*. + * + * *buf* should contain a string in same form as provided by user + * space on sysctl write. + * + * User space may write new value at file position > 0. To override + * the whole sysctl value file position should be set to zero. + * Return + * 0 on success. + * + * **-E2BIG** if the *buf_len* is too big. + * + * **-EINVAL** if sysctl is being read. + * + * int bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to a long integer according to the given base + * and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtol**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * int bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to an unsigned long integer according to the + * given base and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)). + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtoul**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags) + * Description + * Get a bpf-local-storage from a *sk*. + * + * Logically, it could be thought of getting the value from + * a *map* with *sk* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. + * + * Underneath, the value is stored locally at *sk* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. + * + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf-local-storage will be + * created if one does not exist. *value* can be used + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf-local-storage. If *value* is + * **NULL**, the new bpf-local-storage will be zero initialized. + * Return + * A bpf-local-storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf-local-storage. + * + * int bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk) + * Description + * Delete a bpf-local-storage from a *sk*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf-local-storage cannot be found. + * + * int bpf_send_signal(u32 sig) + * Description + * Send signal *sig* to the current task. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. + * + * s64 bpf_tcp_gen_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header. + * + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** SYN cookie cannot be issued due to error + * + * **-ENOENT** SYN cookie should not be issued (no SYN flood) + * + * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies + * + * **-EPROTONOSUPPORT** IP packet version is not 4 or 6 + * + * int bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * *ctx* is a pointer to in-kernel struct sk_buff. + * + * This helper is similar to **bpf_perf_event_output**\ () but + * restricted to raw_tracepoint bpf programs. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from user space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from kernel space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe user address + * *unsafe_ptr* to *dst*. The *size* should include the + * terminating NUL byte. In case the string length is smaller than + * *size*, the target is not padded with further NUL bytes. If the + * string length is larger than *size*, just *size*-1 bytes are + * copied and the last byte is set to NUL. + * + * On success, the length of the copied string is returned. This + * makes this helper useful in tracing programs for reading + * strings, and more importantly to get its length at runtime. See + * the following snippet: + * + * :: + * + * SEC("kprobe/sys_open") + * void bpf_sys_open(struct pt_regs *ctx) + * { + * char buf[PATHLEN]; // PATHLEN is defined to 256 + * int res = bpf_probe_read_user_str(buf, sizeof(buf), + * ctx->di); + * + * // Consume buf, for example push it to + * // userspace via bpf_perf_event_output(); we + * // can use res (the string length) as event + * // size, after checking its boundaries. + * } + * + * In comparison, using **bpf_probe_read_user()** helper here + * instead to read the string would require to estimate the length + * at compile time, and would often result in copying more memory + * than necessary. + * + * Another useful use case is when parsing individual process + * arguments or individual environment variables navigating + * *current*\ **->mm->arg_start** and *current*\ + * **->mm->env_start**: using this helper and the return value, + * one can quickly iterate at the right offset of the memory area. + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * int bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr* + * to *dst*. Same semantics as with bpf_probe_read_user_str() apply. + * Return + * On success, the strictly positive length of the string, including + * the trailing NUL character. On error, a negative value. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2531,7 +2921,24 @@ union bpf_attr { FN(sk_fullsock), \ FN(tcp_sock), \ FN(skb_ecn_set_ce), \ - FN(get_listener_sock), + FN(get_listener_sock), \ + FN(skc_lookup_tcp), \ + FN(tcp_check_syncookie), \ + FN(sysctl_get_name), \ + FN(sysctl_get_current_value), \ + FN(sysctl_get_new_value), \ + FN(sysctl_set_new_value), \ + FN(strtol), \ + FN(strtoul), \ + FN(sk_storage_get), \ + FN(sk_storage_delete), \ + FN(send_signal), \ + FN(tcp_gen_syncookie), \ + FN(skb_output), \ + FN(probe_read_user), \ + FN(probe_read_kernel), \ + FN(probe_read_user_str), \ + FN(probe_read_kernel_str), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2590,9 +2997,30 @@ enum bpf_func_id { /* Current network namespace */ #define BPF_F_CURRENT_NETNS (-1L) +/* BPF_FUNC_skb_adjust_room flags. */ +#define BPF_F_ADJ_ROOM_FIXED_GSO (1ULL << 0) + +#define BPF_ADJ_ROOM_ENCAP_L2_MASK 0xff +#define BPF_ADJ_ROOM_ENCAP_L2_SHIFT 56 + +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 (1ULL << 1) +#define BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 (1ULL << 2) +#define BPF_F_ADJ_ROOM_ENCAP_L4_GRE (1ULL << 3) +#define BPF_F_ADJ_ROOM_ENCAP_L4_UDP (1ULL << 4) +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) + +/* BPF_FUNC_sysctl_get_name flags. */ +#define BPF_F_SYSCTL_BASE_NAME (1ULL << 0) + +/* BPF_FUNC_sk_storage_get flags */ +#define BPF_SK_STORAGE_GET_F_CREATE (1ULL << 0) + /* Mode for BPF_FUNC_skb_adjust_room helper. */ enum bpf_adj_room_mode { BPF_ADJ_ROOM_NET, + BPF_ADJ_ROOM_MAC, }; /* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ @@ -2759,6 +3187,12 @@ struct bpf_tcp_sock { * sum(delta(snd_una)), or how many bytes * were acked. */ + __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups + * total number of DSACK blocks received + */ + __u32 delivered; /* Total data packets delivered incl. rexmits */ + __u32 delivered_ce; /* Like the above but only ECE marked packets */ + __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */ }; struct bpf_sock_tuple { @@ -2778,6 +3212,10 @@ struct bpf_sock_tuple { }; }; +struct bpf_xdp_sock { + __u32 queue_id; +}; + #define XDP_PACKET_HEADROOM 256 /* User return codes for XDP prog type. @@ -2869,6 +3307,7 @@ struct bpf_prog_info { char name[BPF_OBJ_NAME_LEN]; __u32 ifindex; __u32 gpl_compatible:1; + __u32 :31; /* alignment pad */ __u64 netns_dev; __u64 netns_ino; __u32 nr_jited_ksyms; @@ -2923,7 +3362,7 @@ struct bpf_sock_addr { __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. * Stored in network byte order. */ - __u32 user_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. + __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. * Stored in network byte order. */ __u32 user_port; /* Allows 4-byte read and write. @@ -2932,12 +3371,13 @@ struct bpf_sock_addr { __u32 family; /* Allows 4-byte read, but no write */ __u32 type; /* Allows 4-byte read, but no write */ __u32 protocol; /* Allows 4-byte read, but no write */ - __u32 msg_src_ip4; /* Allows 1,2,4-byte read an 4-byte write. + __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write. * Stored in network byte order. */ - __u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. + __u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. * Stored in network byte order. */ + __bpf_md_ptr(struct bpf_sock *, sk); }; /* User bpf_sock_ops struct to access socket values and specify request ops @@ -2989,13 +3429,15 @@ struct bpf_sock_ops { __u32 sk_txhash; __u64 bytes_received; __u64 bytes_acked; + __bpf_md_ptr(struct bpf_sock *, sk); }; /* Definitions for bpf_sock_ops_cb_flags */ #define BPF_SOCK_OPS_RTO_CB_FLAG (1<<0) #define BPF_SOCK_OPS_RETRANS_CB_FLAG (1<<1) #define BPF_SOCK_OPS_STATE_CB_FLAG (1<<2) -#define BPF_SOCK_OPS_ALL_CB_FLAGS 0x7 /* Mask of all currently +#define BPF_SOCK_OPS_RTT_CB_FLAG (1<<3) +#define BPF_SOCK_OPS_ALL_CB_FLAGS 0xF /* Mask of all currently * supported cb flags */ @@ -3050,6 +3492,8 @@ enum { BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after * socket transition to LISTEN state. */ + BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + */ }; /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect @@ -3104,8 +3548,8 @@ struct bpf_raw_tracepoint_args { /* DIRECT: Skip the FIB rules and go to FIB table associated with device * OUTPUT: Do lookup from egress perspective; default is ingress */ -#define BPF_FIB_LOOKUP_DIRECT BIT(0) -#define BPF_FIB_LOOKUP_OUTPUT BIT(1) +#define BPF_FIB_LOOKUP_DIRECT (1U << 0) +#define BPF_FIB_LOOKUP_OUTPUT (1U << 1) enum { BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ @@ -3177,6 +3621,10 @@ enum bpf_task_fd_type { BPF_FD_TYPE_URETPROBE, /* filename + offset */ }; +#define BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG (1U << 0) +#define BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL (1U << 1) +#define BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP (1U << 2) + struct bpf_flow_keys { __u16 nhoff; __u16 thoff; @@ -3198,6 +3646,8 @@ struct bpf_flow_keys { __u32 ipv6_dst[4]; /* in6_addr; network order */ }; }; + __u32 flags; + __be32 flow_label; }; struct bpf_func_info { @@ -3218,4 +3668,25 @@ struct bpf_line_info { struct bpf_spin_lock { __u32 val; }; + +struct bpf_sysctl { + __u32 write; /* Sysctl is being read (= 0) or written (= 1). + * Allows 1,2,4-byte read, but no write. + */ + __u32 file_pos; /* Sysctl file position to read from, write to. + * Allows 1,2,4-byte read an 4-byte write. + */ +}; + +struct bpf_sockopt { + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(void *, optval); + __bpf_md_ptr(void *, optval_end); + + __s32 level; + __s32 optname; + __s32 optlen; + __s32 retval; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ |
