summaryrefslogtreecommitdiffstats
path: root/lib
diff options
context:
space:
mode:
Diffstat (limited to 'lib')
-rw-r--r--lib/Kconfig26
-rw-r--r--lib/Kconfig.debug76
-rw-r--r--lib/Makefile12
-rw-r--r--lib/decompress.c54
-rw-r--r--lib/decompress_bunzip2.c735
-rw-r--r--lib/decompress_inflate.c167
-rw-r--r--lib/decompress_unlzma.c647
-rw-r--r--lib/dynamic_debug.c769
-rw-r--r--lib/dynamic_printk.c414
-rw-r--r--lib/kernel_lock.c2
-rw-r--r--lib/kobject.c2
-rw-r--r--lib/kobject_uevent.c12
-rw-r--r--lib/nlattr.c502
-rw-r--r--lib/zlib_inflate/inflate.h4
-rw-r--r--lib/zlib_inflate/inftrees.h4
15 files changed, 2967 insertions, 459 deletions
diff --git a/lib/Kconfig b/lib/Kconfig
index 03c2c24b9083..2a9c69f34482 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -98,6 +98,20 @@ config LZO_DECOMPRESS
tristate
#
+# These all provide a common interface (hence the apparent duplication with
+# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+#
+config DECOMPRESS_GZIP
+ select ZLIB_INFLATE
+ tristate
+
+config DECOMPRESS_BZIP2
+ tristate
+
+config DECOMPRESS_LZMA
+ tristate
+
+#
# Generic allocator support is selected if needed
#
config GENERIC_ALLOCATOR
@@ -136,12 +150,6 @@ config TEXTSEARCH_BM
config TEXTSEARCH_FSM
tristate
-#
-# plist support is select#ed if needed
-#
-config PLIST
- boolean
-
config HAS_IOMEM
boolean
depends on !NO_IOMEM
@@ -174,4 +182,10 @@ config DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
bool "Disable obsolete cpumask functions" if DEBUG_PER_CPU_MAPS
depends on EXPERIMENTAL && BROKEN
+#
+# Netlink attribute parsing support is select'ed if needed
+#
+config NLATTR
+ bool
+
endmenu
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 1bcf9cd4baa0..0626fa4856e6 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -402,7 +402,7 @@ config LOCKDEP
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS && !PPC
+ select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
select KALLSYMS
select KALLSYMS_ALL
@@ -847,60 +847,70 @@ config BUILD_DOCSRC
Say N if you are unsure.
-config DYNAMIC_PRINTK_DEBUG
- bool "Enable dynamic printk() call support"
+config DYNAMIC_DEBUG
+ bool "Enable dynamic printk() support"
default n
depends on PRINTK
+ depends on DEBUG_FS
select PRINTK_DEBUG
help
Compiles debug level messages into the kernel, which would not
otherwise be available at runtime. These messages can then be
- enabled/disabled on a per module basis. This mechanism implicitly
- enables all pr_debug() and dev_dbg() calls. The impact of this
- compile option is a larger kernel text size of about 2%.
+ enabled/disabled based on various levels of scope - per source file,
+ function, module, format string, and line number. This mechanism
+ implicitly enables all pr_debug() and dev_dbg() calls. The impact of
+ this compile option is a larger kernel text size of about 2%.
Usage:
- Dynamic debugging is controlled by the debugfs file,
- dynamic_printk/modules. This file contains a list of the modules that
- can be enabled. The format of the file is the module name, followed
- by a set of flags that can be enabled. The first flag is always the
- 'enabled' flag. For example:
+ Dynamic debugging is controlled via the 'dynamic_debug/ddebug' file,
+ which is contained in the 'debugfs' filesystem. Thus, the debugfs
+ filesystem must first be mounted before making use of this feature.
+ We refer the control file as: <debugfs>/dynamic_debug/ddebug. This
+ file contains a list of the debug statements that can be enabled. The
+ format for each line of the file is:
- <module_name> <enabled=0/1>
- .
- .
- .
+ filename:lineno [module]function flags format
- <module_name> : Name of the module in which the debug call resides
- <enabled=0/1> : whether the messages are enabled or not
+ filename : source file of the debug statement
+ lineno : line number of the debug statement
+ module : module that contains the debug statement
+ function : function that contains the debug statement
+ flags : 'p' means the line is turned 'on' for printing
+ format : the format used for the debug statement
From a live system:
- snd_hda_intel enabled=0
- fixup enabled=0
- driver enabled=0
+ nullarbor:~ # cat <debugfs>/dynamic_debug/ddebug
+ # filename:lineno [module]function flags format
+ fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012"
+ fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012"
+ fs/aio.c:1770 [aio]sys_io_cancel - "calling\040cancel\012"
- Enable a module:
+ Example usage:
- $echo "set enabled=1 <module_name>" > dynamic_printk/modules
+ // enable the message at line 1603 of file svcsock.c
+ nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+ <debugfs>/dynamic_debug/ddebug
- Disable a module:
+ // enable all the messages in file svcsock.c
+ nullarbor:~ # echo -n 'file svcsock.c +p' >
+ <debugfs>/dynamic_debug/ddebug
- $echo "set enabled=0 <module_name>" > dynamic_printk/modules
+ // enable all the messages in the NFS server module
+ nullarbor:~ # echo -n 'module nfsd +p' >
+ <debugfs>/dynamic_debug/ddebug
- Enable all modules:
+ // enable all 12 messages in the function svc_process()
+ nullarbor:~ # echo -n 'func svc_process +p' >
+ <debugfs>/dynamic_debug/ddebug
- $echo "set enabled=1 all" > dynamic_printk/modules
+ // disable all 12 messages in the function svc_process()
+ nullarbor:~ # echo -n 'func svc_process -p' >
+ <debugfs>/dynamic_debug/ddebug
- Disable all modules:
-
- $echo "set enabled=0 all" > dynamic_printk/modules
-
- Finally, passing "dynamic_printk" at the command line enables
- debugging for all modules. This mode can be turned off via the above
- disable command.
+ See Documentation/dynamic-debug-howto.txt for additional information.
source "samples/Kconfig"
diff --git a/lib/Makefile b/lib/Makefile
index 32b0e64ded27..051a33a8e028 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
rbtree.o radix-tree.o dump_stack.o \
idr.o int_sqrt.o extable.o prio_tree.o \
sha1.o irq_regs.o reciprocal_div.o argv_split.o \
- proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o
+ proportions.o prio_heap.o ratelimit.o show_mem.o \
+ is_single_threaded.o plist.o decompress.o
lib-$(CONFIG_MMU) += ioremap.o
lib-$(CONFIG_SMP) += cpumask.o
@@ -40,7 +41,6 @@ lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
-obj-$(CONFIG_PLIST) += plist.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
obj-$(CONFIG_DEBUG_LIST) += list_debug.o
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
@@ -65,6 +65,10 @@ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
+lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
+
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
@@ -82,7 +86,9 @@ obj-$(CONFIG_HAVE_LMB) += lmb.o
obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
-obj-$(CONFIG_DYNAMIC_PRINTK_DEBUG) += dynamic_printk.o
+obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
+
+obj-$(CONFIG_NLATTR) += nlattr.o
hostprogs-y := gen_crc32table
clean-files := crc32table.h
diff --git a/lib/decompress.c b/lib/decompress.c
new file mode 100644
index 000000000000..d2842f571674
--- /dev/null
+++ b/lib/decompress.c
@@ -0,0 +1,54 @@
+/*
+ * decompress.c
+ *
+ * Detect the decompression method based on magic number
+ */
+
+#include <linux/decompress/generic.h>
+
+#include <linux/decompress/bunzip2.h>
+#include <linux/decompress/unlzma.h>
+#include <linux/decompress/inflate.h>
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#ifndef CONFIG_DECOMPRESS_GZIP
+# define gunzip NULL
+#endif
+#ifndef CONFIG_DECOMPRESS_BZIP2
+# define bunzip2 NULL
+#endif
+#ifndef CONFIG_DECOMPRESS_LZMA
+# define unlzma NULL
+#endif
+
+static const struct compress_format {
+ unsigned char magic[2];
+ const char *name;
+ decompress_fn decompressor;
+} compressed_formats[] = {
+ { {037, 0213}, "gzip", gunzip },
+ { {037, 0236}, "gzip", gunzip },
+ { {0x42, 0x5a}, "bzip2", bunzip2 },
+ { {0x5d, 0x00}, "lzma", unlzma },
+ { {0, 0}, NULL, NULL }
+};
+
+decompress_fn decompress_method(const unsigned char *inbuf, int len,
+ const char **name)
+{
+ const struct compress_format *cf;
+
+ if (len < 2)
+ return NULL; /* Need at least this much... */
+
+ for (cf = compressed_formats; cf->name; cf++) {
+ if (!memcmp(inbuf, cf->magic, 2))
+ break;
+
+ }
+ if (name)
+ *name = cf->name;
+ return cf->decompressor;
+}
diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c
new file mode 100644
index 000000000000..5d3ddb5fcfd9
--- /dev/null
+++ b/lib/decompress_bunzip2.c
@@ -0,0 +1,735 @@
+/* vi: set sw = 4 ts = 4: */
+/* Small bzip2 deflate implementation, by Rob Landley (rob@landley.net).
+
+ Based on bzip2 decompression code by Julian R Seward (jseward@acm.org),
+ which also acknowledges contributions by Mike Burrows, David Wheeler,
+ Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten,
+ Robert Sedgewick, and Jon L. Bentley.
+
+ This code is licensed under the LGPLv2:
+ LGPL (http://www.gnu.org/copyleft/lgpl.html
+*/
+
+/*
+ Size and speed optimizations by Manuel Novoa III (mjn3@codepoet.org).
+
+ More efficient reading of Huffman codes, a streamlined read_bunzip()
+ function, and various other tweaks. In (limited) tests, approximately
+ 20% faster than bzcat on x86 and about 10% faster on arm.
+
+ Note that about 2/3 of the time is spent in read_unzip() reversing
+ the Burrows-Wheeler transformation. Much of that time is delay
+ resulting from cache misses.
+
+ I would ask that anyone benefiting from this work, especially those
+ using it in commercial products, consider making a donation to my local
+ non-profit hospice organization in the name of the woman I loved, who
+ passed away Feb. 12, 2003.
+
+ In memory of Toni W. Hagan
+
+ Hospice of Acadiana, Inc.
+ 2600 Johnston St., Suite 200
+ Lafayette, LA 70503-3240
+
+ Phone (337) 232-1234 or 1-800-738-2226
+ Fax (337) 232-1297
+
+ http://www.hospiceacadiana.com/
+
+ Manuel
+ */
+
+/*
+ Made it fit for running in Linux Kernel by Alain Knaff (alain@knaff.lu)
+*/
+
+
+#ifndef STATIC
+#include <linux/decompress/bunzip2.h>
+#endif /* !STATIC */
+
+#include <linux/decompress/mm.h>
+
+#ifndef INT_MAX
+#define INT_MAX 0x7fffffff
+#endif
+
+/* Constants for Huffman coding */
+#define MAX_GROUPS 6
+#define GROUP_SIZE 50 /* 64 would have been more efficient */
+#define MAX_HUFCODE_BITS 20 /* Longest Huffman code allowed */
+#define MAX_SYMBOLS 258 /* 256 literals + RUNA + RUNB */
+#define SYMBOL_RUNA 0
+#define SYMBOL_RUNB 1
+
+/* Status return values */
+#define RETVAL_OK 0
+#define RETVAL_LAST_BLOCK (-1)
+#define RETVAL_NOT_BZIP_DATA (-2)
+#define RETVAL_UNEXPECTED_INPUT_EOF (-3)
+#define RETVAL_UNEXPECTED_OUTPUT_EOF (-4)
+#define RETVAL_DATA_ERROR (-5)
+#define RETVAL_OUT_OF_MEMORY (-6)
+#define RETVAL_OBSOLETE_INPUT (-7)
+
+/* Other housekeeping constants */
+#define BZIP2_IOBUF_SIZE 4096
+
+/* This is what we know about each Huffman coding group */
+struct group_data {
+ /* We have an extra slot at the end of limit[] for a sentinal value. */
+ int limit[MAX_HUFCODE_BITS+1];
+ int base[MAX_HUFCODE_BITS];
+ int permute[MAX_SYMBOLS];
+ int minLen, maxLen;
+};
+
+/* Structure holding all the housekeeping data, including IO buffers and
+ memory that persists between calls to bunzip */
+struct bunzip_data {
+ /* State for interrupting output loop */
+ int writeCopies, writePos, writeRunCountdown, writeCount, writeCurrent;
+ /* I/O tracking data (file handles, buffers, positions, etc.) */
+ int (*fill)(void*, unsigned int);
+ int inbufCount, inbufPos /*, outbufPos*/;
+ unsigned char *inbuf /*,*outbuf*/;
+ unsigned int inbufBitCount, inbufBits;
+ /* The CRC values stored in the block header and calculated from the
+ data */
+ unsigned int crc32Table[256], headerCRC, totalCRC, writeCRC;
+ /* Intermediate buffer and its size (in bytes) */
+ unsigned int *dbuf, dbufSize;
+ /* These things are a bit too big to go on the stack */
+ unsigned char selectors[32768]; /* nSelectors = 15 bits */
+ struct group_data groups[MAX_GROUPS]; /* Huffman coding tables */
+ int io_error; /* non-zero if we have IO error */
+};
+
+
+/* Return the next nnn bits of input. All reads from the compressed input
+ are done through this function. All reads are big endian */
+static unsigned int INIT get_bits(struct bunzip_data *bd, char bits_wanted)
+{
+ unsigned int bits = 0;
+
+ /* If we need to get more data from the byte buffer, do so.
+ (Loop getting one byte at a time to enforce endianness and avoid
+ unaligned access.) */
+ while (bd->inbufBitCount < bits_wanted) {
+ /* If we need to read more data from file into byte buffer, do
+ so */
+ if (bd->inbufPos == bd->inbufCount) {
+ if (bd->io_error)
+ return 0;
+ bd->inbufCount = bd->fill(bd->inbuf, BZIP2_IOBUF_SIZE);
+ if (bd->inbufCount <= 0) {
+ bd->io_error = RETVAL_UNEXPECTED_INPUT_EOF;
+ return 0;
+ }
+ bd->inbufPos = 0;
+ }
+ /* Avoid 32-bit overflow (dump bit buffer to top of output) */
+ if (bd->inbufBitCount >= 24) {
+ bits = bd->inbufBits&((1 << bd->inbufBitCount)-1);
+ bits_wanted -= bd->inbufBitCount;
+ bits <<= bits_wanted;
+ bd->inbufBitCount = 0;
+ }
+ /* Grab next 8 bits of input from buffer. */
+ bd->inbufBits = (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+ bd->inbufBitCount += 8;
+ }
+ /* Calculate result */
+ bd->inbufBitCount -= bits_wanted;
+ bits |= (bd->inbufBits >> bd->inbufBitCount)&((1 << bits_wanted)-1);
+
+ return bits;
+}
+
+/* Unpacks the next block and sets up for the inverse burrows-wheeler step. */
+
+static int INIT get_next_block(struct bunzip_data *bd)
+{
+ struct group_data *hufGroup = NULL;
+ int *base = NULL;
+ int *limit = NULL;
+ int dbufCount, nextSym, dbufSize, groupCount, selector,
+ i, j, k, t, runPos, symCount, symTotal, nSelectors,
+ byteCount[256];
+ unsigned char uc, symToByte[256], mtfSymbol[256], *selectors;
+ unsigned int *dbuf, origPtr;
+
+ dbuf = bd->dbuf;
+ dbufSize = bd->dbufSize;
+ selectors = bd->selectors;
+
+ /* Read in header signature and CRC, then validate signature.
+ (last block signature means CRC is for whole file, return now) */
+ i = get_bits(bd, 24);
+ j = get_bits(bd, 24);
+ bd->headerCRC = get_bits(bd, 32);
+ if ((i == 0x177245) && (j == 0x385090))
+ return RETVAL_LAST_BLOCK;
+ if ((i != 0x314159) || (j != 0x265359))
+ return RETVAL_NOT_BZIP_DATA;
+ /* We can add support for blockRandomised if anybody complains.
+ There was some code for this in busybox 1.0.0-pre3, but nobody ever
+ noticed that it didn't actually work. */
+ if (get_bits(bd, 1))
+ return RETVAL_OBSOLETE_INPUT;
+ origPtr = get_bits(bd, 24);
+ if (origPtr > dbufSize)
+ return RETVAL_DATA_ERROR;
+ /* mapping table: if some byte values are never used (encoding things
+ like ascii text), the compression code removes the gaps to have fewer
+ symbols to deal with, and writes a sparse bitfield indicating which
+ values were present. We make a translation table to convert the
+ symbols back to the corresponding bytes. */
+ t = get_bits(bd, 16);
+ symTotal = 0;
+ for (i = 0; i < 16; i++) {
+ if (t&(1 << (15-i))) {
+ k = get_bits(bd, 16);
+ for (j = 0; j < 16; j++)
+ if (k&(1 << (15-j)))
+ symToByte[symTotal++] = (16*i)+j;
+ }
+ }
+ /* How many different Huffman coding groups does this block use? */
+ groupCount = get_bits(bd, 3);
+ if (groupCount < 2 || groupCount > MAX_GROUPS)
+ return RETVAL_DATA_ERROR;
+ /* nSelectors: Every GROUP_SIZE many symbols we select a new
+ Huffman coding group. Read in the group selector list,
+ which is stored as MTF encoded bit runs. (MTF = Move To
+ Front, as each value is used it's moved to the start of the
+ list.) */
+ nSelectors = get_bits(bd, 15);
+ if (!nSelectors)
+ return RETVAL_DATA_ERROR;
+ for (i = 0; i < groupCount; i++)
+ mtfSymbol[i] = i;
+ for (i = 0; i < nSelectors; i++) {
+ /* Get next value */
+ for (j = 0; get_bits(bd, 1); j++)
+ if (j >= groupCount)
+ return RETVAL_DATA_ERROR;
+ /* Decode MTF to get the next selector */
+ uc = mtfSymbol[j];
+ for (; j; j--)
+ mtfSymbol[j] = mtfSymbol[j-1];
+ mtfSymbol[0] = selectors[i] = uc;
+ }
+ /* Read the Huffman coding tables for each group, which code
+ for symTotal literal symbols, plus two run symbols (RUNA,
+ RUNB) */
+ symCount = symTotal+2;
+ for (j = 0; j < groupCount; j++) {
+ unsigned char length[MAX_SYMBOLS], temp[MAX_HUFCODE_BITS+1];
+ int minLen, maxLen, pp;
+ /* Read Huffman code lengths for each symbol. They're
+ stored in a way similar to mtf; record a starting
+ value for the first symbol, and an offset from the
+ previous value for everys symbol after that.
+ (Subtracting 1 before the loop and then adding it
+ back at the end is an optimization that makes the
+ test inside the loop simpler: symbol length 0
+ becomes negative, so an unsigned inequality catches
+ it.) */
+ t = get_bits(bd, 5)-1;
+ for (i = 0; i < symCount; i++) {
+ for (;;) {
+ if (((unsigned)t) > (MAX_HUFCODE_BITS-1))
+ return RETVAL_DATA_ERROR;
+
+ /* If first bit is 0, stop. Else
+ second bit indicates whether to
+ increment or decrement the value.
+ Optimization: grab 2 bits and unget
+ the second if the first was 0. */
+
+ k = get_bits(bd, 2);
+ if (k < 2) {
+ bd->inbufBitCount++;
+ break;
+ }
+ /* Add one if second bit 1, else
+ * subtract 1. Avoids if/else */
+ t += (((k+1)&2)-1);
+ }
+ /* Correct for the initial -1, to get the
+ * final symbol length */
+ length[i] = t+1;
+ }
+ /* Find largest and smallest lengths in this group */
+ minLen = maxLen = length[0];
+
+ for (i = 1; i < symCount; i++) {
+ if (length[i] > maxLen)
+ maxLen = length[i];
+ else if (length[i] < minLen)
+ minLen = length[i];
+ }
+
+ /* Calculate permute[], base[], and limit[] tables from
+ * length[].
+ *
+ * permute[] is the lookup table for converting
+ * Huffman coded symbols into decoded symbols. base[]
+ * is the amount to subtract from the value of a
+ * Huffman symbol of a given length when using
+ * permute[].
+ *
+ * limit[] indicates the largest numerical value a
+ * symbol with a given number of bits can have. This
+ * is how the Huffman codes can vary in length: each
+ * code with a value > limit[length] needs another
+ * bit.
+ */
+ hufGroup = bd->groups+j;
+ hufGroup->minLen = minLen;
+ hufGroup->maxLen = maxLen;
+ /* Note that minLen can't be smaller than 1, so we
+ adjust the base and limit array pointers so we're
+ not always wasting the first entry. We do this
+ again when using them (during symbol decoding).*/
+ base = hufGroup->base-1;
+ limit = hufGroup->limit-1;
+ /* Calculate permute[]. Concurently, initialize
+ * temp[] and limit[]. */
+ pp = 0;
+ for (i = minLen; i <= maxLen; i++) {
+ temp[i] = limit[i] = 0;
+ for (t = 0; t < symCount; t++)
+ if (length[t] == i)
+ hufGroup->permute[pp++] = t;
+ }
+ /* Count symbols coded for at each bit length */
+ for (i = 0; i < symCount; i++)
+ temp[length[i]]++;
+ /* Calculate limit[] (the largest symbol-coding value
+ *at each bit length, which is (previous limit <<
+ *1)+symbols at this level), and base[] (number of
+ *symbols to ignore at each bit length, which is limit
+ *minus the cumulative count of symbols coded for
+ *already). */
+ pp = t = 0;
+ for (i = minLen; i < maxLen; i++) {
+ pp += temp[i];
+ /* We read the largest possible symbol size
+ and then unget bits after determining how
+ many we need, and those extra bits could be
+ set to anything. (They're noise from
+ future symbols.) At each level we're
+ really only interested in the first few
+ bits, so here we set all the trailing
+ to-be-ignored bits to 1 so they don't
+ affect the value > limit[length]
+ comparison. */
+ limit[i] = (pp << (maxLen - i)) - 1;
+ pp <<= 1;
+ base[i+1] = pp-(t += temp[i]);
+ }
+ limit[maxLen+1] = INT_MAX; /* Sentinal value for
+ * reading next sym. */
+ limit[maxLen] = pp+temp[maxLen]-1;
+ base[minLen] = 0;
+ }
+ /* We've finished reading and digesting the block header. Now
+ read this block's Huffman coded symbols from the file and
+ undo the Huffman coding and run length encoding, saving the
+ result into dbuf[dbufCount++] = uc */
+
+ /* Initialize symbol occurrence counters and symbol Move To
+ * Front table */
+ for (i = 0; i < 256; i++) {
+ byteCount[i] = 0;
+ mtfSymbol[i] = (unsigned char)i;
+ }
+ /* Loop through compressed symbols. */
+ runPos = dbufCount = symCount = selector = 0;
+ for (;;) {
+ /* Determine which Huffman coding group to use. */
+ if (!(symCount--)) {
+ symCount = GROUP_SIZE-1;
+ if (selector >= nSelectors)
+ return RETVAL_DATA_ERROR;
+ hufGroup = bd->groups+selectors[selector++];
+ base = hufGroup->base-1;
+ limit = hufGroup->limit-1;
+ }
+ /* Read next Huffman-coded symbol. */
+ /* Note: It is far cheaper to read maxLen bits and
+ back up than it is to read minLen bits and then an
+ additional bit at a time, testing as we go.
+ Because there is a trailing last block (with file
+ CRC), there is no danger of the overread causing an
+ unexpected EOF for a valid compressed file. As a
+ further optimization, we do the read inline
+ (falling back to a call to get_bits if the buffer
+ runs dry). The following (up to got_huff_bits:) is
+ equivalent to j = get_bits(bd, hufGroup->maxLen);
+ */
+ while (bd->inbufBitCount < hufGroup->maxLen) {
+ if (bd->inbufPos == bd->inbufCount) {
+ j = get_bits(bd, hufGroup->maxLen);
+ goto got_huff_bits;
+ }
+ bd->inbufBits =
+ (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+ bd->inbufBitCount += 8;
+ };
+ bd->inbufBitCount -= hufGroup->maxLen;
+ j = (bd->inbufBits >> bd->inbufBitCount)&
+ ((1 << hufGroup->maxLen)-1);
+got_huff_bits:
+ /* Figure how how many bits are in next symbol and
+ * unget extras */
+ i = hufGroup->minLen;
+ while (j > limit[i])
+ ++i;
+ bd->inbufBitCount += (hufGroup->maxLen - i);
+ /* Huffman decode value to get nextSym (with bounds checking) */
+ if ((i > hufGroup->maxLen)
+ || (((unsigned)(j = (j>>(hufGroup->maxLen-i))-base[i]))
+ >= MAX_SYMBOLS))
+ return RETVAL_DATA_ERROR;
+ nextSym = hufGroup->permute[j];
+ /* We have now decoded the symbol, which indicates
+ either a new literal byte, or a repeated run of the
+ most recent literal byte. First, check if nextSym
+ indicates a repeated run, and if so loop collecting
+ how many times to repeat the last literal. */
+ if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */
+ /* If this is the start of a new run, zero out
+ * counter */
+ if (!runPos) {
+ runPos = 1;
+ t = 0;
+ }
+ /* Neat trick that saves 1 symbol: instead of
+ or-ing 0 or 1 at each bit position, add 1
+ or 2 instead. For example, 1011 is 1 << 0
+ + 1 << 1 + 2 << 2. 1010 is 2 << 0 + 2 << 1
+ + 1 << 2. You can make any bit pattern
+ that way using 1 less symbol than the basic
+ or 0/1 method (except all bits 0, which
+ would use no symbols, but a run of length 0
+ doesn't mean anything in this context).
+ Thus space is saved. */
+ t += (runPos << nextSym);
+ /* +runPos if RUNA; +2*runPos if RUNB */
+
+ runPos <<= 1;
+ continue;
+ }
+ /* When we hit the first non-run symbol after a run,
+ we now know how many times to repeat the last
+ literal, so append that many copies to our buffer
+ of decoded symbols (dbuf) now. (The last literal
+ used is the one at the head of the mtfSymbol
+ array.) */
+ if (runPos) {
+ runPos = 0;
+ if (dbufCount+t >= dbufSize)
+ return RETVAL_DATA_ERROR;
+
+ uc = symToByte[mtfSymbol[0]];
+ byteCount[uc] += t;
+ while (t--)
+ dbuf[dbufCount++] = uc;
+ }
+ /* Is this the terminating symbol? */
+ if (nextSym > symTotal)
+ break;
+ /* At this point, nextSym indicates a new literal
+ character. Subtract one to get the position in the
+ MTF array at which this literal is currently to be
+ found. (Note that the result can't be -1 or 0,
+ because 0 and 1 are RUNA and RUNB. But another
+ instance of the first symbol in the mtf array,
+ position 0, would have been handled as part of a
+ run above. Therefore 1 unused mtf position minus 2
+ non-literal nextSym values equals -1.) */
+ if (dbufCount >= dbufSize)
+ return RETVAL_DATA_ERROR;
+ i = nextSym - 1;
+ uc = mtfSymbol[i];
+ /* Adjust the MTF array. Since we typically expect to
+ *move only a small number of symbols, and are bound
+ *by 256 in any case, using memmove here would
+ *typically be bigger and slower due to function call
+ *overhead and other assorted setup costs. */
+ do {
+ mtfSymbol[i] = mtfSymbol[i-1];
+ } while (--i);
+ mtfSymbol[0] = uc;
+ uc = symToByte[uc];
+ /* We have our literal byte. Save it into dbuf. */
+ byteCount[uc]++;
+ dbuf[dbufCount++] = (unsigned int)uc;
+ }
+ /* At this point, we've read all the Huffman-coded symbols
+ (and repeated runs) for this block from the input stream,
+ and decoded them into the intermediate buffer. There are
+ dbufCount many decoded bytes in dbuf[]. Now undo the
+ Burrows-Wheeler transform on dbuf. See
+ http://dogma.net/markn/articles/bwt/bwt.htm
+ */
+ /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */
+ j = 0;
+ for (i = 0; i < 256; i++) {
+ k = j+byteCount[i];
+ byteCount[i] = j;
+ j = k;
+ }
+ /* Figure out what order dbuf would be in if we sorted it. */
+ for (i = 0; i < dbufCount; i++) {
+ uc = (unsigned char)(dbuf[i] & 0xff);
+ dbuf[byteCount[uc]] |= (i << 8);
+ byteCount[uc]++;
+ }
+ /* Decode first byte by hand to initialize "previous" byte.
+ Note that it doesn't get output, and if the first three
+ characters are identical it doesn't qualify as a run (hence
+ writeRunCountdown = 5). */
+ if (dbufCount) {
+ if (origPtr >= dbufCount)
+ return RETVAL_DATA_ERROR;
+ bd->writePos = dbuf[origPtr];
+ bd->writeCurrent = (unsigned char)(bd->writePos&0xff);
+ bd->writePos >>= 8;
+ bd->writeRunCountdown = 5;
+ }
+ bd->writeCount = dbufCount;
+
+ return RETVAL_OK;
+}
+
+/* Undo burrows-wheeler transform on intermediate buffer to produce output.
+ If start_bunzip was initialized with out_fd =-1, then up to len bytes of
+ data are written to outbuf. Return value is number of bytes written or
+ error (all errors are negative numbers). If out_fd!=-1, outbuf and len
+ are ignored, data is written to out_fd and return is RETVAL_OK or error.
+*/
+
+static int INIT read_bunzip(struct bunzip_data *bd, char *outbuf, int len)
+{
+ const unsigned int *dbuf;
+ int pos, xcurrent, previous, gotcount;
+
+ /* If last read was short due to end of file, return last block now */
+ if (bd->writeCount < 0)
+ return bd->writeCount;
+
+ gotcount = 0;
+ dbuf = bd->dbuf;
+ pos = bd->writePos;
+ xcurrent = bd->writeCurrent;
+
+ /* We will always have pending decoded data to write into the output
+ buffer unless this is the very first call (in which case we haven't
+ Huffman-decoded a block into the intermediate buffer yet). */
+
+ if (bd->writeCopies) {
+ /* Inside the loop, writeCopies means extra copies (beyond 1) */
+ --bd->writeCopies;
+ /* Loop outputting bytes */
+ for (;;) {
+ /* If the output buffer is full, snapshot
+ * state and return */
+ if (gotcount >= len) {
+ bd->writePos = pos;
+ bd->writeCurrent = xcurrent;
+ bd->writeCopies++;
+ return len;
+ }
+ /* Write next byte into output buffer, updating CRC */
+ outbuf[gotcount++] = xcurrent;
+ bd->writeCRC = (((bd->writeCRC) << 8)
+ ^bd->crc32Table[((bd->writeCRC) >> 24)
+ ^xcurrent]);
+ /* Loop now if we're outputting multiple
+ * copies of this byte */
+ if (bd->writeCopies) {
+ --bd->writeCopies;
+ continue;
+ }
+decode_next_byte:
+ if (!bd->writeCount--)
+ break;
+ /* Follow sequence vector to undo
+ * Burrows-Wheeler transform */
+ previous = xcurrent;
+ pos = dbuf[pos];
+ xcurrent = pos&0xff;
+ pos >>= 8;
+ /* After 3 consecutive copies of the same
+ byte, the 4th is a repeat count. We count
+ down from 4 instead *of counting up because
+ testing for non-zero is faster */
+ if (--bd->writeRunCountdown) {
+ if (xcurrent != previous)
+ bd->writeRunCountdown = 4;
+ } else {
+ /* We have a repeated run, this byte
+ * indicates the count */
+ bd->writeCopies = xcurrent;
+ xcurrent = previous;
+ bd->writeRunCountdown = 5;
+ /* Sometimes there are just 3 bytes
+ * (run length 0) */
+ if (!bd->writeCopies)
+ goto decode_next_byte;
+ /* Subtract the 1 copy we'd output
+ * anyway to get extras */
+ --bd->writeCopies;
+ }
+ }
+ /* Decompression of this block completed successfully */
+ bd->writeCRC = ~bd->writeCRC;
+ bd->totalCRC = ((bd->totalCRC << 1) |
+ (bd->totalCRC >> 31)) ^ bd->writeCRC;
+ /* If this block had a CRC error, force file level CRC error. */
+ if (bd->writeCRC != bd->headerCRC) {
+ bd->totalCRC = bd->headerCRC+1;
+ return RETVAL_LAST_BLOCK;
+ }
+ }
+
+ /* Refill the intermediate buffer by Huffman-decoding next
+ * block of input */
+ /* (previous is just a convenient unused temp variable here) */
+ previous = get_next_block(bd);
+ if (previous) {
+ bd->writeCount = previous;
+ return (previous != RETVAL_LAST_BLOCK) ? previous : gotcount;
+ }
+ bd->writeCRC = 0xffffffffUL;
+ pos = bd->writePos;
+ xcurrent = bd->writeCurrent;
+ goto decode_next_byte;
+}
+
+static int INIT nofill(void *buf, unsigned int len)
+{
+ return -1;
+}
+
+/* Allocate the structure, read file header. If in_fd ==-1, inbuf must contain
+ a complete bunzip file (len bytes long). If in_fd!=-1, inbuf and len are
+ ignored, and data is read from file handle into temporary buffer. */
+static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len,
+ int (*fill)(void*, unsigned int))
+{
+ struct bunzip_data *bd;
+ unsigned int i, j, c;
+ const unsigned int BZh0 =
+ (((unsigned int)'B') << 24)+(((unsigned int)'Z') << 16)
+ +(((unsigned int)'h') << 8)+(unsigned int)'0';
+
+ /* Figure out how much data to allocate */
+ i = sizeof(struct bunzip_data);
+
+ /* Allocate bunzip_data. Most fields initialize to zero. */
+ bd = *bdp = malloc(i);
+ memset(bd, 0, sizeof(struct bunzip_data));
+ /* Setup input buffer */
+ bd->inbuf = inbuf;
+ bd->inbufCount = len;
+ if (fill != NULL)
+ bd->fill = fill;
+ else
+ bd->fill = nofill;
+
+ /* Init the CRC32 table (big endian) */
+ for (i = 0; i < 256; i++) {
+ c = i << 24;
+ for (j = 8; j; j--)
+ c = c&0x80000000 ? (c << 1)^0x04c11db7 : (c << 1);
+ bd->crc32Table[i] = c;
+ }
+
+ /* Ensure that file starts with "BZh['1'-'9']." */
+ i = get_bits(bd, 32);
+ if (((unsigned int)(i-BZh0-1)) >= 9)
+ return RETVAL_NOT_BZIP_DATA;
+
+ /* Fourth byte (ascii '1'-'9'), indicates block size in units of 100k of
+ uncompressed data. Allocate intermediate buffer for block. */
+ bd->dbufSize = 100000*(i-BZh0);
+
+ bd->dbuf = large_malloc(bd->dbufSize * sizeof(int));
+ return RETVAL_OK;
+}
+
+/* Example usage: decompress src_fd to dst_fd. (Stops at end of bzip2 data,
+ not end of file.) */
+STATIC int INIT bunzip2(unsigned char *buf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *outbuf,
+ int *pos,
+ void(*error_fn)(char *x))
+{
+ struct bunzip_data *bd;
+ int i = -1;
+ unsigned char *inbuf;
+
+ set_error_fn(error_fn);
+ if (flush)
+ outbuf = malloc(BZIP2_IOBUF_SIZE);
+ else
+ len -= 4; /* Uncompressed size hack active in pre-boot
+ environment */
+ if (!outbuf) {
+ error("Could not allocate output bufer");
+ return -1;
+ }
+ if (buf)
+ inbuf = buf;
+ else
+ inbuf = malloc(BZIP2_IOBUF_SIZE);
+ if (!inbuf) {
+ error("Could not allocate input bufer");
+ goto exit_0;
+ }
+ i = start_bunzip(&bd, inbuf, len, fill);
+ if (!i) {
+ for (;;) {
+ i = read_bunzip(bd, outbuf, BZIP2_IOBUF_SIZE);
+ if (i <= 0)
+ break;
+ if (!flush)
+ outbuf += i;
+ else
+ if (i != flush(outbuf, i)) {
+ i = RETVAL_UNEXPECTED_OUTPUT_EOF;
+ break;
+ }
+ }
+ }
+ /* Check CRC and release memory */
+ if (i == RETVAL_LAST_BLOCK) {
+ if (bd->headerCRC != bd->totalCRC)
+ error("Data integrity error when decompressing.");
+ else
+ i = RETVAL_OK;
+ } else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) {
+ error("Compressed file ends unexpectedly");
+ }
+ if (bd->dbuf)
+ large_free(bd->dbuf);
+ if (pos)
+ *pos = bd->inbufPos;
+ free(bd);
+ if (!buf)
+ free(inbuf);
+exit_0:
+ if (flush)
+ free(outbuf);
+ return i;
+}
+
+#define decompress bunzip2
diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c
new file mode 100644
index 000000000000..839a329b4fc4
--- /dev/null
+++ b/lib/decompress_inflate.c
@@ -0,0 +1,167 @@
+#ifdef STATIC
+/* Pre-boot environment: included */
+
+/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots
+ * errors about console_printk etc... on ARM */
+#define _LINUX_KERNEL_H
+
+#include "zlib_inflate/inftrees.c"
+#include "zlib_inflate/inffast.c"
+#include "zlib_inflate/inflate.c"
+
+#else /* STATIC */
+/* initramfs et al: linked */
+
+#include <linux/zutil.h>
+
+#include "zlib_inflate/inftrees.h"
+#include "zlib_inflate/inffast.h"
+#include "zlib_inflate/inflate.h"
+
+#include "zlib_inflate/infutil.h"
+
+#endif /* STATIC */
+
+#include <linux/decompress/mm.h>
+
+#define INBUF_LEN (16*1024)
+
+/* Included from initramfs et al code */
+STATIC int INIT gunzip(unsigned char *buf, int len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *out_buf,
+ int *pos,
+ void(*error_fn)(char *x)) {
+ u8 *zbuf;
+ struct z_stream_s *strm;
+ int rc;
+ size_t out_len;
+
+ set_error_fn(error_fn);
+ rc = -1;
+ if (flush) {
+ out_len = 0x8000; /* 32 K */
+ out_buf = malloc(out_len);
+ } else {
+ out_len = 0x7fffffff; /* no limit */
+ }
+ if (!out_buf) {
+ error("Out of memory while allocating output buffer");
+ goto gunzip_nomem1;
+ }
+
+ if (buf)
+ zbuf = buf;
+ else {
+ zbuf = malloc(INBUF_LEN);
+ len = 0;
+ }
+ if (!zbuf) {
+ error("Out of memory while allocating input buffer");
+ goto gunzip_nomem2;
+ }
+
+ strm = malloc(sizeof(*strm));
+ if (strm == NULL) {
+ error("Out of memory while allocating z_stream");
+ goto gunzip_nomem3;
+ }
+
+ strm->workspace = malloc(flush ? zlib_inflate_workspacesize() :
+ sizeof(struct inflate_state));
+ if (strm->workspace == NULL) {
+ error("Out of memory while allocating workspace");
+ goto gunzip_nomem4;
+ }
+
+ if (len == 0)
+ len = fill(zbuf, INBUF_LEN);
+
+ /* verify the gzip header */
+ if (len < 10 ||
+ zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) {
+ if (pos)
+ *pos = 0;
+ error("Not a gzip file");
+ goto gunzip_5;
+ }
+
+ /* skip over gzip header (1f,8b,08... 10 bytes total +
+ * possible asciz filename)
+ */
+ strm->next_in = zbuf + 10;
+ /* skip over asciz filename */
+ if (zbuf[3] & 0x8) {
+ while (strm->next_in[0])
+ strm->next_in++;
+ strm->next_in++;
+ }
+ strm->avail_in = len - (strm->next_in - zbuf);
+
+ strm->next_out = out_buf;
+ strm->avail_out = out_len;
+
+ rc = zlib_inflateInit2(strm, -MAX_WBITS);
+
+ if (!flush) {
+ WS(strm)->inflate_state.wsize = 0;
+ WS(strm)->inflate_state.window = NULL;
+ }
+
+ while (rc == Z_OK) {
+ if (strm->avail_in == 0) {
+ /* TODO: handle case where both pos and fill are set */
+ len = fill(zbuf, INBUF_LEN);
+ if (len < 0) {
+ rc = -1;
+ error("read error");
+ break;
+ }
+ strm->next_in = zbuf;
+ strm->avail_in = len;
+ }
+ rc = zlib_inflate(strm, 0);
+
+ /* Write any data generated */
+ if (flush && strm->next_out > out_buf) {
+ int l = strm->next_out - out_buf;
+ if (l != flush(out_buf, l)) {
+ rc = -1;
+ error("write error");
+ break;
+ }
+ strm->next_out = out_buf;
+ strm->avail_out = out_len;
+ }
+
+ /* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
+ if (rc == Z_STREAM_END) {
+ rc = 0;
+ break;
+ } else if (rc != Z_OK) {
+ error("uncompression error");
+ rc = -1;
+ }
+ }
+
+ zlib_inflateEnd(strm);
+ if (pos)
+ /* add + 8 to skip over trailer */
+ *pos = strm->next_in - zbuf+8;
+
+gunzip_5:
+ free(strm->workspace);
+gunzip_nomem4:
+ free(strm);
+gunzip_nomem3:
+ if (!buf)
+ free(zbuf);
+gunzip_nomem2:
+ if (flush)
+ free(out_buf);
+gunzip_nomem1:
+ return rc; /* returns Z_OK (0) if successful */
+}
+
+#define decompress gunzip
diff --git a/lib/decompress_unlzma.c b/lib/decompress_unlzma.c
new file mode 100644
index 000000000000..546f2f4c157e
--- /dev/null
+++ b/lib/decompress_unlzma.c
@@ -0,0 +1,647 @@
+/* Lzma decompressor for Linux kernel. Shamelessly snarfed
+ *from busybox 1.1.1
+ *
+ *Linux kernel adaptation
+ *Copyright (C) 2006 Alain < alain@knaff.lu >
+ *
+ *Based on small lzma deflate implementation/Small range coder
+ *implementation for lzma.
+ *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org >
+ *
+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ *Copyright (C) 1999-2005 Igor Pavlov
+ *
+ *Copyrights of the parts, see headers below.
+ *
+ *
+ *This program is free software; you can redistribute it and/or
+ *modify it under the terms of the GNU Lesser General Public
+ *License as published by the Free Software Foundation; either
+ *version 2.1 of the License, or (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ *Lesser General Public License for more details.
+ *
+ *You should have received a copy of the GNU Lesser General Public
+ *License along with this library; if not, write to the Free Software
+ *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef STATIC
+#include <linux/decompress/unlzma.h>
+#endif /* STATIC */
+
+#include <linux/decompress/mm.h>
+
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+static long long INIT read_int(unsigned char *ptr, int size)
+{
+ int i;
+ long long ret = 0;
+
+ for (i = 0; i < size; i++)
+ ret = (ret << 8) | ptr[size-i-1];
+ return ret;
+}
+
+#define ENDIAN_CONVERT(x) \
+ x = (typeof(x))read_int((unsigned char *)&x, sizeof(x))
+
+
+/* Small range coder implementation for lzma.
+ *Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org >
+ *
+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ *Copyright (c) 1999-2005 Igor Pavlov
+ */
+
+#include <linux/compiler.h>
+
+#define LZMA_IOBUF_SIZE 0x10000
+
+struct rc {
+ int (*fill)(void*, unsigned int);
+ uint8_t *ptr;
+ uint8_t *buffer;
+ uint8_t *buffer_end;
+ int buffer_size;
+ uint32_t code;
+ uint32_t range;
+ uint32_t bound;
+};
+
+
+#define RC_TOP_BITS 24
+#define RC_MOVE_BITS 5
+#define RC_MODEL_TOTAL_BITS 11
+
+
+/* Called twice: once at startup and once in rc_normalize() */
+static void INIT rc_read(struct rc *rc)
+{
+ rc->buffer_size = rc->fill((char *)rc->buffer, LZMA_IOBUF_SIZE);
+ if (rc->buffer_size <= 0)
+ error("unexpected EOF");
+ rc->ptr = rc->buffer;
+ rc->buffer_end = rc->buffer + rc->buffer_size;
+}
+
+/* Called once */
+static inline void INIT rc_init(struct rc *rc,
+ int (*fill)(void*, unsigned int),
+ char *buffer, int buffer_size)
+{
+ rc->fill = fill;
+ rc->buffer = (uint8_t *)buffer;
+ rc->buffer_size = buffer_size;
+ rc->buffer_end = rc->buffer + rc->buffer_size;
+ rc->ptr = rc->buffer;
+
+ rc->code = 0;
+ rc->range = 0xFFFFFFFF;
+}
+
+static inline void INIT rc_init_code(struct rc *rc)
+{
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ if (rc->ptr >= rc->buffer_end)
+ rc_read(rc);
+ rc->code = (rc->code << 8) | *rc->ptr++;
+ }
+}
+
+
+/* Called once. TODO: bb_maybe_free() */
+static inline void INIT rc_free(struct rc *rc)
+{
+ free(rc->buffer);
+}
+
+/* Called twice, but one callsite is in inline'd rc_is_bit_0_helper() */
+static void INIT rc_do_normalize(struct rc *rc)
+{
+ if (rc->ptr >= rc->buffer_end)
+ rc_read(rc);
+ rc->range <<= 8;
+ rc->code = (rc->code << 8) | *rc->ptr++;
+}
+static inline void INIT rc_normalize(struct rc *rc)
+{
+ if (rc->range < (1 << RC_TOP_BITS))
+ rc_do_normalize(rc);
+}
+
+/* Called 9 times */
+/* Why rc_is_bit_0_helper exists?
+ *Because we want to always expose (rc->code < rc->bound) to optimizer
+ */
+static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p)
+{
+ rc_normalize(rc);
+ rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS);
+ return rc->bound;
+}
+static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p)
+{
+ uint32_t t = rc_is_bit_0_helper(rc, p);
+ return rc->code < t;
+}
+
+/* Called ~10 times, but very small, thus inlined */
+static inline void INIT rc_update_bit_0(struct rc *rc, uint16_t *p)
+{
+ rc->range = rc->bound;
+ *p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS;
+}
+static inline void rc_update_bit_1(struct rc *rc, uint16_t *p)
+{
+ rc->range -= rc->bound;
+ rc->code -= rc->bound;
+ *p -= *p >> RC_MOVE_BITS;
+}
+
+/* Called 4 times in unlzma loop */
+static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol)
+{
+ if (rc_is_bit_0(rc, p)) {
+ rc_update_bit_0(rc, p);
+ *symbol *= 2;
+ return 0;
+ } else {
+ rc_update_bit_1(rc, p);
+ *symbol = *symbol * 2 + 1;
+ return 1;
+ }
+}
+
+/* Called once */
+static inline int INIT rc_direct_bit(struct rc *rc)
+{
+ rc_normalize(rc);
+ rc->range >>= 1;
+ if (rc->code >= rc->range) {
+ rc->code -= rc->range;
+ return 1;
+ }
+ return 0;
+}
+
+/* Called twice */
+static inline void INIT
+rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol)
+{
+ int i = num_levels;
+
+ *symbol = 1;
+ while (i--)
+ rc_get_bit(rc, p + *symbol, symbol);
+ *symbol -= 1 << num_levels;
+}
+
+
+/*
+ * Small lzma deflate implementation.
+ * Copyright (C) 2006 Aurelien Jacobs < aurel@gnuage.org >
+ *
+ * Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ * Copyright (C) 1999-2005 Igor Pavlov
+ */
+
+
+struct lzma_header {
+ uint8_t pos;
+ uint32_t dict_size;
+ uint64_t dst_size;
+} __attribute__ ((packed)) ;
+
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_NUM_POS_BITS_MAX 4
+
+#define LZMA_LEN_NUM_LOW_BITS 3
+#define LZMA_LEN_NUM_MID_BITS 3
+#define LZMA_LEN_NUM_HIGH_BITS 8
+
+#define LZMA_LEN_CHOICE 0
+#define LZMA_LEN_CHOICE_2 (LZMA_LEN_CHOICE + 1)
+#define LZMA_LEN_LOW (LZMA_LEN_CHOICE_2 + 1)
+#define LZMA_LEN_MID (LZMA_LEN_LOW \
+ + (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS)))
+#define LZMA_LEN_HIGH (LZMA_LEN_MID \
+ +(1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS)))
+#define LZMA_NUM_LEN_PROBS (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS))
+
+#define LZMA_NUM_STATES 12
+#define LZMA_NUM_LIT_STATES 7
+
+#define LZMA_START_POS_MODEL_INDEX 4
+#define LZMA_END_POS_MODEL_INDEX 14
+#define LZMA_NUM_FULL_DISTANCES (1 << (LZMA_END_POS_MODEL_INDEX >> 1))
+
+#define LZMA_NUM_POS_SLOT_BITS 6
+#define LZMA_NUM_LEN_TO_POS_STATES 4
+
+#define LZMA_NUM_ALIGN_BITS 4
+
+#define LZMA_MATCH_MIN_LEN 2
+
+#define LZMA_IS_MATCH 0
+#define LZMA_IS_REP (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
+#define LZMA_IS_REP_G0 (LZMA_IS_REP + LZMA_NUM_STATES)
+#define LZMA_IS_REP_G1 (LZMA_IS_REP_G0 + LZMA_NUM_STATES)
+#define LZMA_IS_REP_G2 (LZMA_IS_REP_G1 + LZMA_NUM_STATES)
+#define LZMA_IS_REP_0_LONG (LZMA_IS_REP_G2 + LZMA_NUM_STATES)
+#define LZMA_POS_SLOT (LZMA_IS_REP_0_LONG \
+ + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
+#define LZMA_SPEC_POS (LZMA_POS_SLOT \
+ +(LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS))
+#define LZMA_ALIGN (LZMA_SPEC_POS \
+ + LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX)
+#define LZMA_LEN_CODER (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS))
+#define LZMA_REP_LEN_CODER (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS)
+#define LZMA_LITERAL (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS)
+
+
+struct writer {
+ uint8_t *buffer;
+ uint8_t previous_byte;
+ size_t buffer_pos;
+ int bufsize;
+ size_t global_pos;
+ int(*flush)(void*, unsigned int);
+ struct lzma_header *header;
+};
+
+struct cstate {
+ int state;
+ uint32_t rep0, rep1, rep2, rep3;
+};
+
+static inline size_t INIT get_pos(struct writer *wr)
+{
+ return
+ wr->global_pos + wr->buffer_pos;
+}
+
+static inline uint8_t INIT peek_old_byte(struct writer *wr,
+ uint32_t offs)
+{
+ if (!wr->flush) {
+ int32_t pos;
+ while (offs > wr->header->dict_size)
+ offs -= wr->header->dict_size;
+ pos = wr->buffer_pos - offs;
+ return wr->buffer[pos];
+ } else {
+ uint32_t pos = wr->buffer_pos - offs;
+ while (pos >= wr->header->dict_size)
+ pos += wr->header->dict_size;
+ return wr->buffer[pos];
+ }
+
+}
+
+static inline void INIT write_byte(struct writer *wr, uint8_t byte)
+{
+ wr->buffer[wr->buffer_pos++] = wr->previous_byte = byte;
+ if (wr->flush && wr->buffer_pos == wr->header->dict_size) {
+ wr->buffer_pos = 0;
+ wr->global_pos += wr->header->dict_size;
+ wr->flush((char *)wr->buffer, wr->header->dict_size);
+ }
+}
+
+
+static inline void INIT copy_byte(struct writer *wr, uint32_t offs)
+{
+ write_byte(wr, peek_old_byte(wr, offs));
+}
+
+static inline void INIT copy_bytes(struct writer *wr,
+ uint32_t rep0, int len)
+{
+ do {
+ copy_byte(wr, rep0);
+ len--;
+ } while (len != 0 && wr->buffer_pos < wr->header->dst_size);
+}
+
+static inline void INIT process_bit0(struct writer *wr, struct rc *rc,
+ struct cstate *cst, uint16_t *p,
+ int pos_state, uint16_t *prob,
+ int lc, uint32_t literal_pos_mask) {
+ int mi = 1;
+ rc_update_bit_0(rc, prob);
+ prob = (p + LZMA_LITERAL +
+ (LZMA_LIT_SIZE
+ * (((get_pos(wr) & literal_pos_mask) << lc)
+ + (wr->previous_byte >> (8 - lc))))
+ );
+
+ if (cst->state >= LZMA_NUM_LIT_STATES) {
+ int match_byte = peek_old_byte(wr, cst->rep0);
+ do {
+ int bit;
+ uint16_t *prob_lit;
+
+ match_byte <<= 1;
+ bit = match_byte & 0x100;
+ prob_lit = prob + 0x100 + bit + mi;
+ if (rc_get_bit(rc, prob_lit, &mi)) {
+ if (!bit)
+ break;
+ } else {
+ if (bit)
+ break;
+ }
+ } while (mi < 0x100);
+ }
+ while (mi < 0x100) {
+ uint16_t *prob_lit = prob + mi;
+ rc_get_bit(rc, prob_lit, &mi);
+ }
+ write_byte(wr, mi);
+ if (cst->state < 4)
+ cst->state = 0;
+ else if (cst->state < 10)
+ cst->state -= 3;
+ else
+ cst->state -= 6;
+}
+
+static inline void INIT process_bit1(struct writer *wr, struct rc *rc,
+ struct cstate *cst, uint16_t *p,
+ int pos_state, uint16_t *prob) {
+ int offset;
+ uint16_t *prob_len;
+ int num_bits;
+ int len;
+
+ rc_update_bit_1(rc, prob);
+ prob = p + LZMA_IS_REP + cst->state;
+ if (rc_is_bit_0(rc, prob)) {
+ rc_update_bit_0(rc, prob);
+ cst->rep3 = cst->rep2;
+ cst->rep2 = cst->rep1;
+ cst->rep1 = cst->rep0;
+ cst->state = cst->state < LZMA_NUM_LIT_STATES ? 0 : 3;
+ prob = p + LZMA_LEN_CODER;
+ } else {
+ rc_update_bit_1(rc, prob);
+ prob = p + LZMA_IS_REP_G0 + cst->state;
+ if (rc_is_bit_0(rc, prob)) {
+ rc_update_bit_0(rc, prob);
+ prob = (p + LZMA_IS_REP_0_LONG
+ + (cst->state <<
+ LZMA_NUM_POS_BITS_MAX) +
+ pos_state);
+ if (rc_is_bit_0(rc, prob)) {
+ rc_update_bit_0(rc, prob);
+
+ cst->state = cst->state < LZMA_NUM_LIT_STATES ?
+ 9 : 11;
+ copy_byte(wr, cst->rep0);
+ return;
+ } else {
+ rc_update_bit_1(rc, prob);
+ }
+ } else {
+ uint32_t distance;
+
+ rc_update_bit_1(rc, prob);
+ prob = p + LZMA_IS_REP_G1 + cst->state;
+ if (rc_is_bit_0(rc, prob)) {
+ rc_update_bit_0(rc, prob);
+ distance = cst->rep1;
+ } else {
+ rc_update_bit_1(rc, prob);
+ prob = p + LZMA_IS_REP_G2 + cst->state;
+ if (rc_is_bit_0(rc, prob)) {
+ rc_update_bit_0(rc, prob);
+ distance = cst->rep2;
+ } else {
+ rc_update_bit_1(rc, prob);
+ distance = cst->rep3;
+ cst->rep3 = cst->rep2;
+ }
+ cst->rep2 = cst->rep1;
+ }
+ cst->rep1 = cst->rep0;
+ cst->rep0 = distance;
+ }
+ cst->state = cst->state < LZMA_NUM_LIT_STATES ? 8 : 11;
+ prob = p + LZMA_REP_LEN_CODER;
+ }
+
+ prob_len = prob + LZMA_LEN_CHOICE;
+ if (rc_is_bit_0(rc, prob_len)) {
+ rc_update_bit_0(rc, prob_len);
+ prob_len = (prob + LZMA_LEN_LOW
+ + (pos_state <<
+ LZMA_LEN_NUM_LOW_BITS));
+ offset = 0;
+ num_bits = LZMA_LEN_NUM_LOW_BITS;
+ } else {
+ rc_update_bit_1(rc, prob_len);
+ prob_len = prob + LZMA_LEN_CHOICE_2;
+ if (rc_is_bit_0(rc, prob_len)) {
+ rc_update_bit_0(rc, prob_len);
+ prob_len = (prob + LZMA_LEN_MID
+ + (pos_state <<
+ LZMA_LEN_NUM_MID_BITS));
+ offset = 1 << LZMA_LEN_NUM_LOW_BITS;
+ num_bits = LZMA_LEN_NUM_MID_BITS;
+ } else {
+ rc_update_bit_1(rc, prob_len);
+ prob_len = prob + LZMA_LEN_HIGH;
+ offset = ((1 << LZMA_LEN_NUM_LOW_BITS)
+ + (1 << LZMA_LEN_NUM_MID_BITS));
+ num_bits = LZMA_LEN_NUM_HIGH_BITS;
+ }
+ }
+
+ rc_bit_tree_decode(rc, prob_len, num_bits, &len);
+ len += offset;
+
+ if (cst->state < 4) {
+ int pos_slot;
+
+ cst->state += LZMA_NUM_LIT_STATES;
+ prob =
+ p + LZMA_POS_SLOT +
+ ((len <
+ LZMA_NUM_LEN_TO_POS_STATES ? len :
+ LZMA_NUM_LEN_TO_POS_STATES - 1)
+ << LZMA_NUM_POS_SLOT_BITS);
+ rc_bit_tree_decode(rc, prob,
+ LZMA_NUM_POS_SLOT_BITS,
+ &pos_slot);
+ if (pos_slot >= LZMA_START_POS_MODEL_INDEX) {
+ int i, mi;
+ num_bits = (pos_slot >> 1) - 1;
+ cst->rep0 = 2 | (pos_slot & 1);
+ if (pos_slot < LZMA_END_POS_MODEL_INDEX) {
+ cst->rep0 <<= num_bits;
+ prob = p + LZMA_SPEC_POS +
+ cst->rep0 - pos_slot - 1;
+ } else {
+ num_bits -= LZMA_NUM_ALIGN_BITS;
+ while (num_bits--)
+ cst->rep0 = (cst->rep0 << 1) |
+ rc_direct_bit(rc);
+ prob = p + LZMA_ALIGN;
+ cst->rep0 <<= LZMA_NUM_ALIGN_BITS;
+ num_bits = LZMA_NUM_ALIGN_BITS;
+ }
+ i = 1;
+ mi = 1;
+ while (num_bits--) {
+ if (rc_get_bit(rc, prob + mi, &mi))
+ cst->rep0 |= i;
+ i <<= 1;
+ }
+ } else
+ cst->rep0 = pos_slot;
+ if (++(cst->rep0) == 0)
+ return;
+ }
+
+ len += LZMA_MATCH_MIN_LEN;
+
+ copy_bytes(wr, cst->rep0, len);
+}
+
+
+
+STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
+ int(*fill)(void*, unsigned int),
+ int(*flush)(void*, unsigned int),
+ unsigned char *output,
+ int *posp,
+ void(*error_fn)(char *x)
+ )
+{
+ struct lzma_header header;
+ int lc, pb, lp;
+ uint32_t pos_state_mask;
+ uint32_t literal_pos_mask;
+ uint16_t *p;
+ int num_probs;
+ struct rc rc;
+ int i, mi;
+ struct writer wr;
+ struct cstate cst;
+ unsigned char *inbuf;
+ int ret = -1;
+
+ set_error_fn(error_fn);
+ if (!flush)
+ in_len -= 4; /* Uncompressed size hack active in pre-boot
+ environment */
+ if (buf)
+ inbuf = buf;
+ else
+ inbuf = malloc(LZMA_IOBUF_SIZE);
+ if (!inbuf) {
+ error("Could not allocate input bufer");
+ goto exit_0;
+ }
+
+ cst.state = 0;
+ cst.rep0 = cst.rep1 = cst.rep2 = cst.rep3 = 1;
+
+ wr.header = &header;
+ wr.flush = flush;
+ wr.global_pos = 0;
+ wr.previous_byte = 0;
+ wr.buffer_pos = 0;
+
+ rc_init(&rc, fill, inbuf, in_len);
+
+ for (i = 0; i < sizeof(header); i++) {
+ if (rc.ptr >= rc.buffer_end)
+ rc_read(&rc);
+ ((unsigned char *)&header)[i] = *rc.ptr++;
+ }
+
+ if (header.pos >= (9 * 5 * 5))
+ error("bad header");
+
+ mi = 0;
+ lc = header.pos;
+ while (lc >= 9) {
+ mi++;
+ lc -= 9;
+ }
+ pb = 0;
+ lp = mi;
+ while (lp >= 5) {
+ pb++;
+ lp -= 5;
+ }
+ pos_state_mask = (1 << pb) - 1;
+ literal_pos_mask = (1 << lp) - 1;
+
+ ENDIAN_CONVERT(header.dict_size);
+ ENDIAN_CONVERT(header.dst_size);
+
+ if (header.dict_size == 0)
+ header.dict_size = 1;
+
+ if (output)
+ wr.buffer = output;
+ else {
+ wr.bufsize = MIN(header.dst_size, header.dict_size);
+ wr.buffer = large_malloc(wr.bufsize);
+ }
+ if (wr.buffer == NULL)
+ goto exit_1;
+
+ num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp));
+ p = (uint16_t *) large_malloc(num_probs * sizeof(*p));
+ if (p == 0)
+ goto exit_2;
+ num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp));
+ for (i = 0; i < num_probs; i++)
+ p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1;
+
+ rc_init_code(&rc);
+
+ while (get_pos(&wr) < header.dst_size) {
+ int pos_state = get_pos(&wr) & pos_state_mask;
+ uint16_t *prob = p + LZMA_IS_MATCH +
+ (cst.state << LZMA_NUM_POS_BITS_MAX) + pos_state;
+ if (rc_is_bit_0(&rc, prob))
+ process_bit0(&wr, &rc, &cst, p, pos_state, prob,
+ lc, literal_pos_mask);
+ else {
+ process_bit1(&wr, &rc, &cst, p, pos_state, prob);
+ if (cst.rep0 == 0)
+ break;
+ }
+ }
+
+ if (posp)
+ *posp = rc.ptr-rc.buffer;
+ if (wr.flush)
+ wr.flush(wr.buffer, wr.buffer_pos);
+ ret = 0;
+ large_free(p);
+exit_2:
+ if (!output)
+ large_free(wr.buffer);
+exit_1:
+ if (!buf)
+ free(inbuf);
+exit_0:
+ return ret;
+}
+
+#define decompress unlzma
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
new file mode 100644
index 000000000000..833139ce1e22
--- /dev/null
+++ b/lib/dynamic_debug.c
@@ -0,0 +1,769 @@
+/*
+ * lib/dynamic_debug.c
+ *
+ * make pr_debug()/dev_dbg() calls runtime configurable based upon their
+ * source module.
+ *
+ * Copyright (C) 2008 Jason Baron <jbaron@redhat.com>
+ * By Greg Banks <gnb@melbourne.sgi.com>
+ * Copyright (c) 2008 Silicon Graphics Inc. All Rights Reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kallsyms.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/list.h>
+#include <linux/sysctl.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/dynamic_debug.h>
+#include <linux/debugfs.h>
+
+extern struct _ddebug __start___verbose[];
+extern struct _ddebug __stop___verbose[];
+
+/* dynamic_debug_enabled, and dynamic_debug_enabled2 are bitmasks in which
+ * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They
+ * use independent hash functions, to reduce the chance of false positives.
+ */
+long long dynamic_debug_enabled;
+EXPORT_SYMBOL_GPL(dynamic_debug_enabled);
+long long dynamic_debug_enabled2;
+EXPORT_SYMBOL_GPL(dynamic_debug_enabled2);
+
+struct ddebug_table {
+ struct list_head link;
+ char *mod_name;
+ unsigned int num_ddebugs;
+ unsigned int num_enabled;
+ struct _ddebug *ddebugs;
+};
+
+struct ddebug_query {
+ const char *filename;
+ const char *module;
+ const char *function;
+ const char *format;
+ unsigned int first_lineno, last_lineno;
+};
+
+struct ddebug_iter {
+ struct ddebug_table *table;
+ unsigned int idx;
+};
+
+static DEFINE_MUTEX(ddebug_lock);
+static LIST_HEAD(ddebug_tables);
+static int verbose = 0;
+
+/* Return the last part of a pathname */
+static inline const char *basename(const char *path)
+{
+ const char *tail = strrchr(path, '/');
+ return tail ? tail+1 : path;
+}
+
+/* format a string into buf[] which describes the _ddebug's flags */
+static char *ddebug_describe_flags(struct _ddebug *dp, char *buf,
+ size_t maxlen)
+{
+ char *p = buf;
+
+ BUG_ON(maxlen < 4);
+ if (dp->flags & _DPRINTK_FLAGS_PRINT)
+ *p++ = 'p';
+ if (p == buf)
+ *p++ = '-';
+ *p = '\0';
+
+ return buf;
+}
+
+/*
+ * must be called with ddebug_lock held
+ */
+
+static int disabled_hash(char hash, bool first_table)
+{
+ struct ddebug_table *dt;
+ char table_hash_value;
+
+ list_for_each_entry(dt, &ddebug_tables, link) {
+ if (first_table)
+ table_hash_value = dt->ddebugs->primary_hash;
+ else
+ table_hash_value = dt->ddebugs->secondary_hash;
+ if (dt->num_enabled && (hash == table_hash_value))
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Search the tables for _ddebug's which match the given
+ * `query' and apply the `flags' and `mask' to them. Tells
+ * the user which ddebug's were changed, or whether none
+ * were matched.
+ */
+static void ddebug_change(const struct ddebug_query *query,
+ unsigned int flags, unsigned int mask)
+{
+ int i;
+ struct ddebug_table *dt;
+ unsigned int newflags;
+ unsigned int nfound = 0;
+ char flagbuf[8];
+
+ /* search for matching ddebugs */
+ mutex_lock(&ddebug_lock);
+ list_for_each_entry(dt, &ddebug_tables, link) {
+
+ /* match against the module name */
+ if (query->module != NULL &&
+ strcmp(query->module, dt->mod_name))
+ continue;
+
+ for (i = 0 ; i < dt->num_ddebugs ; i++) {
+ struct _ddebug *dp = &dt->ddebugs[i];
+
+ /* match against the source filename */
+ if (query->filename != NULL &&
+ strcmp(query->filename, dp->filename) &&
+ strcmp(query->filename, basename(dp->filename)))
+ continue;
+
+ /* match against the function */
+ if (query->function != NULL &&
+ strcmp(query->function, dp->function))
+ continue;
+
+ /* match against the format */
+ if (query->format != NULL &&
+ strstr(dp->format, query->format) == NULL)
+ continue;
+
+ /* match against the line number range */
+ if (query->first_lineno &&
+ dp->lineno < query->first_lineno)
+ continue;
+ if (query->last_lineno &&
+ dp->lineno > query->last_lineno)
+ continue;
+
+ nfound++;
+
+ newflags = (dp->flags & mask) | flags;
+ if (newflags == dp->flags)
+ continue;
+
+ if (!newflags)
+ dt->num_enabled--;
+ else if (!dp-flags)
+ dt->num_enabled++;
+ dp->flags = newflags;
+ if (newflags) {
+ dynamic_debug_enabled |=
+ (1LL << dp->primary_hash);
+ dynamic_debug_enabled2 |=
+ (1LL << dp->secondary_hash);
+ } else {
+ if (disabled_hash(dp->primary_hash, true))
+ dynamic_debug_enabled &=
+ ~(1LL << dp->primary_hash);
+ if (disabled_hash(dp->secondary_hash, false))
+ dynamic_debug_enabled2 &=
+ ~(1LL << dp->secondary_hash);
+ }
+ if (verbose)
+ printk(KERN_INFO
+ "ddebug: changed %s:%d [%s]%s %s\n",
+ dp->filename, dp->lineno,
+ dt->mod_name, dp->function,
+ ddebug_describe_flags(dp, flagbuf,
+ sizeof(flagbuf)));
+ }
+ }
+ mutex_unlock(&ddebug_lock);
+
+ if (!nfound && verbose)
+ printk(KERN_INFO "ddebug: no matches for query\n");
+}
+
+/*
+ * Split the buffer `buf' into space-separated words.
+ * Handles simple " and ' quoting, i.e. without nested,
+ * embedded or escaped \". Return the number of words
+ * or <0 on error.
+ */
+static int ddebug_tokenize(char *buf, char *words[], int maxwords)
+{
+ int nwords = 0;
+
+ while (*buf) {
+ char *end;
+
+ /* Skip leading whitespace */
+ while (*buf && isspace(*buf))
+ buf++;
+ if (!*buf)
+ break; /* oh, it was trailing whitespace */
+
+ /* Run `end' over a word, either whitespace separated or quoted */
+ if (*buf == '"' || *buf == '\'') {
+ int quote = *buf++;
+ for (end = buf ; *end && *end != quote ; end++)
+ ;
+ if (!*end)
+ return -EINVAL; /* unclosed quote */
+ } else {
+ for (end = buf ; *end && !isspace(*end) ; end++)
+ ;
+ BUG_ON(end == buf);
+ }
+ /* Here `buf' is the start of the word, `end' is one past the end */
+
+ if (nwords == maxwords)
+ return -EINVAL; /* ran out of words[] before bytes */
+ if (*end)
+ *end++ = '\0'; /* terminate the word */
+ words[nwords++] = buf;
+ buf = end;
+ }
+
+ if (verbose) {
+ int i;
+ printk(KERN_INFO "%s: split into words:", __func__);
+ for (i = 0 ; i < nwords ; i++)
+ printk(" \"%s\"", words[i]);
+ printk("\n");
+ }
+
+ return nwords;
+}
+
+/*
+ * Parse a single line number. Note that the empty string ""
+ * is treated as a special case and converted to zero, which
+ * is later treated as a "don't care" value.
+ */
+static inline int parse_lineno(const char *str, unsigned int *val)
+{
+ char *end = NULL;
+ BUG_ON(str == NULL);
+ if (*str == '\0') {
+ *val = 0;
+ return 0;
+ }
+ *val = simple_strtoul(str, &end, 10);
+ return end == NULL || end == str || *end != '\0' ? -EINVAL : 0;
+}
+
+/*
+ * Undo octal escaping in a string, inplace. This is useful to
+ * allow the user to express a query which matches a format
+ * containing embedded spaces.
+ */
+#define isodigit(c) ((c) >= '0' && (c) <= '7')
+static char *unescape(char *str)
+{
+ char *in = str;
+ char *out = str;
+
+ while (*in) {
+ if (*in == '\\') {
+ if (in[1] == '\\') {
+ *out++ = '\\';
+ in += 2;
+ continue;
+ } else if (in[1] == 't') {
+ *out++ = '\t';
+ in += 2;
+ continue;
+ } else if (in[1] == 'n') {
+ *out++ = '\n';
+ in += 2;
+ continue;
+ } else if (isodigit(in[1]) &&
+ isodigit(in[2]) &&
+ isodigit(in[3])) {
+ *out++ = ((in[1] - '0')<<6) |
+ ((in[2] - '0')<<3) |
+ (in[3] - '0');
+ in += 4;
+ continue;
+ }
+ }
+ *out++ = *in++;
+ }
+ *out = '\0';
+
+ return str;
+}
+
+/*
+ * Parse words[] as a ddebug query specification, which is a series
+ * of (keyword, value) pairs chosen from these possibilities:
+ *
+ * func <function-name>
+ * file <full-pathname>
+ * file <base-filename>
+ * module <module-name>
+ * format <escaped-string-to-find-in-format>
+ * line <lineno>
+ * line <first-lineno>-<last-lineno> // where either may be empty
+ */
+static int ddebug_parse_query(char *words[], int nwords,
+ struct ddebug_query *query)
+{
+ unsigned int i;
+
+ /* check we have an even number of words */
+ if (nwords % 2 != 0)
+ return -EINVAL;
+ memset(query, 0, sizeof(*query));
+
+ for (i = 0 ; i < nwords ; i += 2) {
+ if (!strcmp(words[i], "func"))
+ query->function = words[i+1];
+ else if (!strcmp(words[i], "file"))
+ query->filename = words[i+1];
+ else if (!strcmp(words[i], "module"))
+ query->module = words[i+1];
+ else if (!strcmp(words[i], "format"))
+ query->format = unescape(words[i+1]);
+ else if (!strcmp(words[i], "line")) {
+ char *first = words[i+1];
+ char *last = strchr(first, '-');
+ if (last)
+ *last++ = '\0';
+ if (parse_lineno(first, &query->first_lineno) < 0)
+ return -EINVAL;
+ if (last != NULL) {
+ /* range <first>-<last> */
+ if (parse_lineno(last, &query->last_lineno) < 0)
+ return -EINVAL;
+ } else {
+ query->last_lineno = query->first_lineno;
+ }
+ } else {
+ if (verbose)
+ printk(KERN_ERR "%s: unknown keyword \"%s\"\n",
+ __func__, words[i]);
+ return -EINVAL;
+ }
+ }
+
+ if (verbose)
+ printk(KERN_INFO "%s: q->function=\"%s\" q->filename=\"%s\" "
+ "q->module=\"%s\" q->format=\"%s\" q->lineno=%u-%u\n",
+ __func__, query->function, query->filename,
+ query->module, query->format, query->first_lineno,
+ query->last_lineno);
+
+ return 0;
+}
+
+/*
+ * Parse `str' as a flags specification, format [-+=][p]+.
+ * Sets up *maskp and *flagsp to be used when changing the
+ * flags fields of matched _ddebug's. Returns 0 on success
+ * or <0 on error.
+ */
+static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
+ unsigned int *maskp)
+{
+ unsigned flags = 0;
+ int op = '=';
+
+ switch (*str) {
+ case '+':
+ case '-':
+ case '=':
+ op = *str++;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (verbose)
+ printk(KERN_INFO "%s: op='%c'\n", __func__, op);
+
+ for ( ; *str ; ++str) {
+ switch (*str) {
+ case 'p':
+ flags |= _DPRINTK_FLAGS_PRINT;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+ if (flags == 0)
+ return -EINVAL;
+ if (verbose)
+ printk(KERN_INFO "%s: flags=0x%x\n", __func__, flags);
+
+ /* calculate final *flagsp, *maskp according to mask and op */
+ switch (op) {
+ case '=':
+ *maskp = 0;
+ *flagsp = flags;
+ break;
+ case '+':
+ *maskp = ~0U;
+ *flagsp = flags;
+ break;
+ case '-':
+ *maskp = ~flags;
+ *flagsp = 0;
+ break;
+ }
+ if (verbose)
+ printk(KERN_INFO "%s: *flagsp=0x%x *maskp=0x%x\n",
+ __func__, *flagsp, *maskp);
+ return 0;
+}
+
+/*
+ * File_ops->write method for <debugfs>/dynamic_debug/conrol. Gathers the
+ * command text from userspace, parses and executes it.
+ */
+static ssize_t ddebug_proc_write(struct file *file, const char __user *ubuf,
+ size_t len, loff_t *offp)
+{
+ unsigned int flags = 0, mask = 0;
+ struct ddebug_query query;
+#define MAXWORDS 9
+ int nwords;
+ char *words[MAXWORDS];
+ char tmpbuf[256];
+
+ if (len == 0)
+ return 0;
+ /* we don't check *offp -- multiple writes() are allowed */
+ if (len > sizeof(tmpbuf)-1)
+ return -E2BIG;
+ if (copy_from_user(tmpbuf, ubuf, len))
+ return -EFAULT;
+ tmpbuf[len] = '\0';
+ if (verbose)
+ printk(KERN_INFO "%s: read %d bytes from userspace\n",
+ __func__, (int)len);
+
+ nwords = ddebug_tokenize(tmpbuf, words, MAXWORDS);
+ if (nwords < 0)
+ return -EINVAL;
+ if (ddebug_parse_query(words, nwords-1, &query))
+ return -EINVAL;
+ if (ddebug_parse_flags(words[nwords-1], &flags, &mask))
+ return -EINVAL;
+
+ /* actually go and implement the change */
+ ddebug_change(&query, flags, mask);
+
+ *offp += len;
+ return len;
+}
+
+/*
+ * Set the iterator to point to the first _ddebug object
+ * and return a pointer to that first object. Returns
+ * NULL if there are no _ddebugs at all.
+ */
+static struct _ddebug *ddebug_iter_first(struct ddebug_iter *iter)
+{
+ if (list_empty(&ddebug_tables)) {
+ iter->table = NULL;
+ iter->idx = 0;
+ return NULL;
+ }
+ iter->table = list_entry(ddebug_tables.next,
+ struct ddebug_table, link);
+ iter->idx = 0;
+ return &iter->table->ddebugs[iter->idx];
+}
+
+/*
+ * Advance the iterator to point to the next _ddebug
+ * object from the one the iterator currently points at,
+ * and returns a pointer to the new _ddebug. Returns
+ * NULL if the iterator has seen all the _ddebugs.
+ */
+static struct _ddebug *ddebug_iter_next(struct ddebug_iter *iter)
+{
+ if (iter->table == NULL)
+ return NULL;
+ if (++iter->idx == iter->table->num_ddebugs) {
+ /* iterate to next table */
+ iter->idx = 0;
+ if (list_is_last(&iter->table->link, &ddebug_tables)) {
+ iter->table = NULL;
+ return NULL;
+ }
+ iter->table = list_entry(iter->table->link.next,
+ struct ddebug_table, link);
+ }
+ return &iter->table->ddebugs[iter->idx];
+}
+
+/*
+ * Seq_ops start method. Called at the start of every
+ * read() call from userspace. Takes the ddebug_lock and
+ * seeks the seq_file's iterator to the given position.
+ */
+static void *ddebug_proc_start(struct seq_file *m, loff_t *pos)
+{
+ struct ddebug_iter *iter = m->private;
+ struct _ddebug *dp;
+ int n = *pos;
+
+ if (verbose)
+ printk(KERN_INFO "%s: called m=%p *pos=%lld\n",
+ __func__, m, (unsigned long long)*pos);
+
+ mutex_lock(&ddebug_lock);
+
+ if (!n)
+ return SEQ_START_TOKEN;
+ if (n < 0)
+ return NULL;
+ dp = ddebug_iter_first(iter);
+ while (dp != NULL && --n > 0)
+ dp = ddebug_iter_next(iter);
+ return dp;
+}
+
+/*
+ * Seq_ops next method. Called several times within a read()
+ * call from userspace, with ddebug_lock held. Walks to the
+ * next _ddebug object with a special case for the header line.
+ */
+static void *ddebug_proc_next(struct seq_file *m, void *p, loff_t *pos)
+{
+ struct ddebug_iter *iter = m->private;
+ struct _ddebug *dp;
+
+ if (verbose)
+ printk(KERN_INFO "%s: called m=%p p=%p *pos=%lld\n",
+ __func__, m, p, (unsigned long long)*pos);
+
+ if (p == SEQ_START_TOKEN)
+ dp = ddebug_iter_first(iter);
+ else
+ dp = ddebug_iter_next(iter);
+ ++*pos;
+ return dp;
+}
+
+/*
+ * Seq_ops show method. Called several times within a read()
+ * call from userspace, with ddebug_lock held. Formats the
+ * current _ddebug as a single human-readable line, with a
+ * special case for the header line.
+ */
+static int ddebug_proc_show(struct seq_file *m, void *p)
+{
+ struct ddebug_iter *iter = m->private;
+ struct _ddebug *dp = p;
+ char flagsbuf[8];
+
+ if (verbose)
+ printk(KERN_INFO "%s: called m=%p p=%p\n",
+ __func__, m, p);
+
+ if (p == SEQ_START_TOKEN) {
+ seq_puts(m,
+ "# filename:lineno [module]function flags format\n");
+ return 0;
+ }
+
+ seq_printf(m, "%s:%u [%s]%s %s \"",
+ dp->filename, dp->lineno,
+ iter->table->mod_name, dp->function,
+ ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+ seq_escape(m, dp->format, "\t\r\n\"");
+ seq_puts(m, "\"\n");
+
+ return 0;
+}
+
+/*
+ * Seq_ops stop method. Called at the end of each read()
+ * call from userspace. Drops ddebug_lock.
+ */
+static void ddebug_proc_stop(struct seq_file *m, void *p)
+{
+ if (verbose)
+ printk(KERN_INFO "%s: called m=%p p=%p\n",
+ __func__, m, p);
+ mutex_unlock(&ddebug_lock);
+}
+
+static const struct seq_operations ddebug_proc_seqops = {
+ .start = ddebug_proc_start,
+ .next = ddebug_proc_next,
+ .show = ddebug_proc_show,
+ .stop = ddebug_proc_stop
+};
+
+/*
+ * File_ops->open method for <debugfs>/dynamic_debug/control. Does the seq_file
+ * setup dance, and also creates an iterator to walk the _ddebugs.
+ * Note that we create a seq_file always, even for O_WRONLY files
+ * where it's not needed, as doing so simplifies the ->release method.
+ */
+static int ddebug_proc_open(struct inode *inode, struct file *file)
+{
+ struct ddebug_iter *iter;
+ int err;
+
+ if (verbose)
+ printk(KERN_INFO "%s: called\n", __func__);
+
+ iter = kzalloc(sizeof(*iter), GFP_KERNEL);
+ if (iter == NULL)
+ return -ENOMEM;
+
+ err = seq_open(file, &ddebug_proc_seqops);
+ if (err) {
+ kfree(iter);
+ return err;
+ }
+ ((struct seq_file *) file->private_data)->private = iter;
+ return 0;
+}
+
+static const struct file_operations ddebug_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ddebug_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release_private,
+ .write = ddebug_proc_write
+};
+
+/*
+ * Allocate a new ddebug_table for the given module
+ * and add it to the global list.
+ */
+int ddebug_add_module(struct _ddebug *tab, unsigned int n,
+ const char *name)
+{
+ struct ddebug_table *dt;
+ char *new_name;
+
+ dt = kzalloc(sizeof(*dt), GFP_KERNEL);
+ if (dt == NULL)
+ return -ENOMEM;
+ new_name = kstrdup(name, GFP_KERNEL);
+ if (new_name == NULL) {
+ kfree(dt);
+ return -ENOMEM;
+ }
+ dt->mod_name = new_name;
+ dt->num_ddebugs = n;
+ dt->num_enabled = 0;
+ dt->ddebugs = tab;
+
+ mutex_lock(&ddebug_lock);
+ list_add_tail(&dt->link, &ddebug_tables);
+ mutex_unlock(&ddebug_lock);
+
+ if (verbose)
+ printk(KERN_INFO "%u debug prints in module %s\n",
+ n, dt->mod_name);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ddebug_add_module);
+
+static void ddebug_table_free(struct ddebug_table *dt)
+{
+ list_del_init(&dt->link);
+ kfree(dt->mod_name);
+ kfree(dt);
+}
+
+/*
+ * Called in response to a module being unloaded. Removes
+ * any ddebug_table's which point at the module.
+ */
+int ddebug_remove_module(char *mod_name)
+{
+ struct ddebug_table *dt, *nextdt;
+ int ret = -ENOENT;
+
+ if (verbose)
+ printk(KERN_INFO "%s: removing module \"%s\"\n",
+ __func__, mod_name);
+
+ mutex_lock(&ddebug_lock);
+ list_for_each_entry_safe(dt, nextdt, &ddebug_tables, link) {
+ if (!strcmp(dt->mod_name, mod_name)) {
+ ddebug_table_free(dt);
+ ret = 0;
+ }
+ }
+ mutex_unlock(&ddebug_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ddebug_remove_module);
+
+static void ddebug_remove_all_tables(void)
+{
+ mutex_lock(&ddebug_lock);
+ while (!list_empty(&ddebug_tables)) {
+ struct ddebug_table *dt = list_entry(ddebug_tables.next,
+ struct ddebug_table,
+ link);
+ ddebug_table_free(dt);
+ }
+ mutex_unlock(&ddebug_lock);
+}
+
+static int __init dynamic_debug_init(void)
+{
+ struct dentry *dir, *file;
+ struct _ddebug *iter, *iter_start;
+ const char *modname = NULL;
+ int ret = 0;
+ int n = 0;
+
+ dir = debugfs_create_dir("dynamic_debug", NULL);
+ if (!dir)
+ return -ENOMEM;
+ file = debugfs_create_file("control", 0644, dir, NULL,
+ &ddebug_proc_fops);
+ if (!file) {
+ debugfs_remove(dir);
+ return -ENOMEM;
+ }
+ if (__start___verbose != __stop___verbose) {
+ iter = __start___verbose;
+ modname = iter->modname;
+ iter_start = iter;
+ for (; iter < __stop___verbose; iter++) {
+ if (strcmp(modname, iter->modname)) {
+ ret = ddebug_add_module(iter_start, n, modname);
+ if (ret)
+ goto out_free;
+ n = 0;
+ modname = iter->modname;
+ iter_start = iter;
+ }
+ n++;
+ }
+ ret = ddebug_add_module(iter_start, n, modname);
+ }
+out_free:
+ if (ret) {
+ ddebug_remove_all_tables();
+ debugfs_remove(dir);
+ debugfs_remove(file);
+ }
+ return 0;
+}
+module_init(dynamic_debug_init);
diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c
deleted file mode 100644
index 165a19763dc9..000000000000
--- a/lib/dynamic_printk.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * lib/dynamic_printk.c
- *
- * make pr_debug()/dev_dbg() calls runtime configurable based upon their
- * their source module.
- *
- * Copyright (C) 2008 Red Hat, Inc., Jason Baron <jbaron@redhat.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
-#include <linux/seq_file.h>
-#include <linux/debugfs.h>
-#include <linux/fs.h>
-
-extern struct mod_debug __start___verbose[];
-extern struct mod_debug __stop___verbose[];
-
-struct debug_name {
- struct hlist_node hlist;
- struct hlist_node hlist2;
- int hash1;
- int hash2;
- char *name;
- int enable;
- int type;
-};
-
-static int nr_entries;
-static int num_enabled;
-int dynamic_enabled = DYNAMIC_ENABLED_NONE;
-static struct hlist_head module_table[DEBUG_HASH_TABLE_SIZE] =
- { [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT };
-static struct hlist_head module_table2[DEBUG_HASH_TABLE_SIZE] =
- { [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT };
-static DECLARE_MUTEX(debug_list_mutex);
-
-/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which
- * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They
- * use independent hash functions, to reduce the chance of false positives.
- */
-long long dynamic_printk_enabled;
-EXPORT_SYMBOL_GPL(dynamic_printk_enabled);
-long long dynamic_printk_enabled2;
-EXPORT_SYMBOL_GPL(dynamic_printk_enabled2);
-
-/* returns the debug module pointer. */
-static struct debug_name *find_debug_module(char *module_name)
-{
- int i;
- struct hlist_head *head;
- struct hlist_node *node;
- struct debug_name *element;
-
- element = NULL;
- for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) {
- head = &module_table[i];
- hlist_for_each_entry_rcu(element, node, head, hlist)
- if (!strcmp(element->name, module_name))
- return element;
- }
- return NULL;
-}
-
-/* returns the debug module pointer. */
-static struct debug_name *find_debug_module_hash(char *module_name, int hash)
-{
- struct hlist_head *head;
- struct hlist_node *node;
- struct debug_name *element;
-
- element = NULL;
- head = &module_table[hash];
- hlist_for_each_entry_rcu(element, node, head, hlist)
- if (!strcmp(element->name, module_name))
- return element;
- return NULL;
-}
-
-/* caller must hold mutex*/
-static int __add_debug_module(char *mod_name, int hash, int hash2)
-{
- struct debug_name *new;
- char *module_name;
- int ret = 0;
-
- if (find_debug_module(mod_name)) {
- ret = -EINVAL;
- goto out;
- }
- module_name = kmalloc(strlen(mod_name) + 1, GFP_KERNEL);
- if (!module_name) {
- ret = -ENOMEM;
- goto out;
- }
- module_name = strcpy(module_name, mod_name);
- module_name[strlen(mod_name)] = '\0';
- new = kzalloc(sizeof(struct debug_name), GFP_KERNEL);
- if (!new) {
- kfree(module_name);
- ret = -ENOMEM;
- goto out;
- }
- INIT_HLIST_NODE(&new->hlist);
- INIT_HLIST_NODE(&new->hlist2);
- new->name = module_name;
- new->hash1 = hash;
- new->hash2 = hash2;
- hlist_add_head_rcu(&new->hlist, &module_table[hash]);
- hlist_add_head_rcu(&new->hlist2, &module_table2[hash2]);
- nr_entries++;
-out:
- return ret;
-}
-
-int unregister_dynamic_debug_module(char *mod_name)
-{
- struct debug_name *element;
- int ret = 0;
-
- down(&debug_list_mutex);
- element = find_debug_module(mod_name);
- if (!element) {
- ret = -EINVAL;
- goto out;
- }
- hlist_del_rcu(&element->hlist);
- hlist_del_rcu(&element->hlist2);
- synchronize_rcu();
- kfree(element->name);
- if (element->enable)
- num_enabled--;
- kfree(element);
- nr_entries--;
-out:
- up(&debug_list_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
-
-int register_dynamic_debug_module(char *mod_name, int type, char *share_name,
- char *flags, int hash, int hash2)
-{
- struct debug_name *elem;
- int ret = 0;
-
- down(&debug_list_mutex);
- elem = find_debug_module(mod_name);
- if (!elem) {
- if (__add_debug_module(mod_name, hash, hash2))
- goto out;
- elem = find_debug_module(mod_name);
- if (dynamic_enabled == DYNAMIC_ENABLED_ALL &&
- !strcmp(mod_name, share_name)) {
- elem->enable = true;
- num_enabled++;
- }
- }
- elem->type |= type;
-out:
- up(&debug_list_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(register_dynamic_debug_module);
-
-int __dynamic_dbg_enabled_helper(char *mod_name, int type, int value, int hash)
-{
- struct debug_name *elem;
- int ret = 0;
-
- if (dynamic_enabled == DYNAMIC_ENABLED_ALL)
- return 1;
- rcu_read_lock();
- elem = find_debug_module_hash(mod_name, hash);
- if (elem && elem->enable)
- ret = 1;
- rcu_read_unlock();
- return ret;
-}
-EXPORT_SYMBOL_GPL(__dynamic_dbg_enabled_helper);
-
-static void set_all(bool enable)
-{
- struct debug_name *e;
- struct hlist_node *node;
- int i;
- long long enable_mask;
-
- for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) {
- if (module_table[i].first != NULL) {
- hlist_for_each_entry(e, node, &module_table[i], hlist) {
- e->enable = enable;
- }
- }
- }
- if (enable)
- enable_mask = ULLONG_MAX;
- else
- enable_mask = 0;
- dynamic_printk_enabled = enable_mask;
- dynamic_printk_enabled2 = enable_mask;
-}
-
-static int disabled_hash(int i, bool first_table)
-{
- struct debug_name *e;
- struct hlist_node *node;
-
- if (first_table) {
- hlist_for_each_entry(e, node, &module_table[i], hlist) {
- if (e->enable)
- return 0;
- }
- } else {
- hlist_for_each_entry(e, node, &module_table2[i], hlist2) {
- if (e->enable)
- return 0;
- }
- }
- return 1;
-}
-
-static ssize_t pr_debug_write(struct file *file, const char __user *buf,
- size_t length, loff_t *ppos)
-{
- char *buffer, *s, *value_str, *setting_str;
- int err, value;
- struct debug_name *elem = NULL;
- int all = 0;
-
- if (length > PAGE_SIZE || length < 0)
- return -EINVAL;
-
- buffer = (char *)__get_free_page(GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- err = -EFAULT;
- if (copy_from_user(buffer, buf, length))
- goto out;
-
- err = -EINVAL;
- if (length < PAGE_SIZE)
- buffer[length] = '\0';
- else if (buffer[PAGE_SIZE-1])
- goto out;
-
- err = -EINVAL;
- down(&debug_list_mutex);
-
- if (strncmp("set", buffer, 3))
- goto out_up;
- s = buffer + 3;
- setting_str = strsep(&s, "=");
- if (s == NULL)
- goto out_up;
- setting_str = strstrip(setting_str);
- value_str = strsep(&s, " ");
- if (s == NULL)
- goto out_up;
- s = strstrip(s);
- if (!strncmp(s, "all", 3))
- all = 1;
- else
- elem = find_debug_module(s);
- if (!strncmp(setting_str, "enable", 6)) {
- value = !!simple_strtol(value_str, NULL, 10);
- if (all) {
- if (value) {
- set_all(true);
- num_enabled = nr_entries;
- dynamic_enabled = DYNAMIC_ENABLED_ALL;
- } else {
- set_all(false);
- num_enabled = 0;
- dynamic_enabled = DYNAMIC_ENABLED_NONE;
- }
- err = 0;
- } else if (elem) {
- if (value && (elem->enable == 0)) {
- dynamic_printk_enabled |= (1LL << elem->hash1);
- dynamic_printk_enabled2 |= (1LL << elem->hash2);
- elem->enable = 1;
- num_enabled++;
- dynamic_enabled = DYNAMIC_ENABLED_SOME;
- err = 0;
- printk(KERN_DEBUG
- "debugging enabled for module %s\n",
- elem->name);
- } else if (!value && (elem->enable == 1)) {
- elem->enable = 0;
- num_enabled--;
- if (disabled_hash(elem->hash1, true))
- dynamic_printk_enabled &=
- ~(1LL << elem->hash1);
- if (disabled_hash(elem->hash2, false))
- dynamic_printk_enabled2 &=
- ~(1LL << elem->hash2);
- if (num_enabled)
- dynamic_enabled = DYNAMIC_ENABLED_SOME;
- else
- dynamic_enabled = DYNAMIC_ENABLED_NONE;
- err = 0;
- printk(KERN_DEBUG
- "debugging disabled for module %s\n",
- elem->name);
- }
- }
- }
- if (!err)
- err = length;
-out_up:
- up(&debug_list_mutex);
-out:
- free_page((unsigned long)buffer);
- return err;
-}
-
-static void *pr_debug_seq_start(struct seq_file *f, loff_t *pos)
-{
- return (*pos < DEBUG_HASH_TABLE_SIZE) ? pos : NULL;
-}
-
-static void *pr_debug_seq_next(struct seq_file *s, void *v, loff_t *pos)
-{
- (*pos)++;
- if (*pos >= DEBUG_HASH_TABLE_SIZE)
- return NULL;
- return pos;
-}
-
-static void pr_debug_seq_stop(struct seq_file *s, void *v)
-{
- /* Nothing to do */
-}
-
-static int pr_debug_seq_show(struct seq_file *s, void *v)
-{
- struct hlist_head *head;
- struct hlist_node *node;
- struct debug_name *elem;
- unsigned int i = *(loff_t *) v;
-
- rcu_read_lock();
- head = &module_table[i];
- hlist_for_each_entry_rcu(elem, node, head, hlist) {
- seq_printf(s, "%s enabled=%d", elem->name, elem->enable);
- seq_printf(s, "\n");
- }
- rcu_read_unlock();
- return 0;
-}
-
-static struct seq_operations pr_debug_seq_ops = {
- .start = pr_debug_seq_start,
- .next = pr_debug_seq_next,
- .stop = pr_debug_seq_stop,
- .show = pr_debug_seq_show
-};
-
-static int pr_debug_open(struct inode *inode, struct file *filp)
-{
- return seq_open(filp, &pr_debug_seq_ops);
-}
-
-static const struct file_operations pr_debug_operations = {
- .open = pr_debug_open,
- .read = seq_read,
- .write = pr_debug_write,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static int __init dynamic_printk_init(void)
-{
- struct dentry *dir, *file;
- struct mod_debug *iter;
- unsigned long value;
-
- dir = debugfs_create_dir("dynamic_printk", NULL);
- if (!dir)
- return -ENOMEM;
- file = debugfs_create_file("modules", 0644, dir, NULL,
- &pr_debug_operations);
- if (!file) {
- debugfs_remove(dir);
- return -ENOMEM;
- }
- for (value = (unsigned long)__start___verbose;
- value < (unsigned long)__stop___verbose;
- value += sizeof(struct mod_debug)) {
- iter = (struct mod_debug *)value;
- register_dynamic_debug_module(iter->modname,
- iter->type,
- iter->logical_modname,
- iter->flag_names, iter->hash, iter->hash2);
- }
- if (dynamic_enabled == DYNAMIC_ENABLED_ALL)
- set_all(true);
- return 0;
-}
-module_init(dynamic_printk_init);
-/* may want to move this earlier so we can get traces as early as possible */
-
-static int __init dynamic_printk_setup(char *str)
-{
- if (str)
- return -ENOENT;
- dynamic_enabled = DYNAMIC_ENABLED_ALL;
- return 0;
-}
-/* Use early_param(), so we can get debug output as early as possible */
-early_param("dynamic_printk", dynamic_printk_setup);
diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c
index 01a3c22c1b5a..39f1029e3525 100644
--- a/lib/kernel_lock.c
+++ b/lib/kernel_lock.c
@@ -39,7 +39,7 @@ static __cacheline_aligned_in_smp DEFINE_SPINLOCK(kernel_flag);
int __lockfunc __reacquire_kernel_lock(void)
{
while (!_raw_spin_trylock(&kernel_flag)) {
- if (test_thread_flag(TIF_NEED_RESCHED))
+ if (need_resched())
return -EAGAIN;
cpu_relax();
}
diff --git a/lib/kobject.c b/lib/kobject.c
index 0487d1f64806..a6dec32f2ddd 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -212,7 +212,7 @@ static int kobject_add_internal(struct kobject *kobj)
* @fmt: format string used to build the name
* @vargs: vargs to format the string.
*/
-static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
+int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
va_list vargs)
{
const char *old_name = kobj->name;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 318328ddbd1c..97a777ad4f59 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -118,6 +118,13 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
kset = top_kobj->kset;
uevent_ops = kset->uevent_ops;
+ /* skip the event, if uevent_suppress is set*/
+ if (kobj->uevent_suppress) {
+ pr_debug("kobject: '%s' (%p): %s: uevent_suppress "
+ "caused the event to drop!\n",
+ kobject_name(kobj), kobj, __func__);
+ return 0;
+ }
/* skip the event, if the filter returns zero. */
if (uevent_ops && uevent_ops->filter)
if (!uevent_ops->filter(kset, kobj)) {
@@ -227,6 +234,9 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
NETLINK_CB(skb).dst_group = 1;
retval = netlink_broadcast(uevent_sock, skb, 0, 1,
GFP_KERNEL);
+ /* ENOBUFS should be handled in userspace */
+ if (retval == -ENOBUFS)
+ retval = 0;
} else
retval = -ENOMEM;
}
@@ -248,7 +258,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
goto exit;
retval = call_usermodehelper(argv[0], argv,
- env->envp, UMH_WAIT_EXEC);
+ env->envp, UMH_NO_WAIT);
}
exit:
diff --git a/lib/nlattr.c b/lib/nlattr.c
new file mode 100644
index 000000000000..c4706eb98d3d
--- /dev/null
+++ b/lib/nlattr.c
@@ -0,0 +1,502 @@
+/*
+ * NETLINK Netlink attributes
+ *
+ * Authors: Thomas Graf <tgraf@suug.ch>
+ * Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <net/netlink.h>
+
+static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = {
+ [NLA_U8] = sizeof(u8),
+ [NLA_U16] = sizeof(u16),
+ [NLA_U32] = sizeof(u32),
+ [NLA_U64] = sizeof(u64),
+ [NLA_NESTED] = NLA_HDRLEN,
+};
+
+static int validate_nla(struct nlattr *nla, int maxtype,
+ const struct nla_policy *policy)
+{
+ const struct nla_policy *pt;
+ int minlen = 0, attrlen = nla_len(nla), type = nla_type(nla);
+
+ if (type <= 0 || type > maxtype)
+ return 0;
+
+ pt = &policy[type];
+
+ BUG_ON(pt->type > NLA_TYPE_MAX);
+
+ switch (pt->type) {
+ case NLA_FLAG:
+ if (attrlen > 0)
+ return -ERANGE;
+ break;
+
+ case NLA_NUL_STRING:
+ if (pt->len)
+ minlen = min_t(int, attrlen, pt->len + 1);
+ else
+ minlen = attrlen;
+
+ if (!minlen || memchr(nla_data(nla), '\0', minlen) == NULL)
+ return -EINVAL;
+ /* fall through */
+
+ case NLA_STRING:
+ if (attrlen < 1)
+ return -ERANGE;
+
+ if (pt->len) {
+ char *buf = nla_data(nla);
+
+ if (buf[attrlen - 1] == '\0')
+ attrlen--;
+
+ if (attrlen > pt->len)
+ return -ERANGE;
+ }
+ break;
+
+ case NLA_BINARY:
+ if (pt->len && attrlen > pt->len)
+ return -ERANGE;
+ break;
+
+ case NLA_NESTED_COMPAT:
+ if (attrlen < pt->len)
+ return -ERANGE;
+ if (attrlen < NLA_ALIGN(pt->len))
+ break;
+ if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN)
+ return -ERANGE;
+ nla = nla_data(nla) + NLA_ALIGN(pt->len);
+ if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN + nla_len(nla))
+ return -ERANGE;
+ break;
+ case NLA_NESTED:
+ /* a nested attributes is allowed to be empty; if its not,
+ * it must have a size of at least NLA_HDRLEN.
+ */
+ if (attrlen == 0)
+ break;
+ default:
+ if (pt->len)
+ minlen = pt->len;
+ else if (pt->type != NLA_UNSPEC)
+ minlen = nla_attr_minlen[pt->type];
+
+ if (attrlen < minlen)
+ return -ERANGE;
+ }
+
+ return 0;
+}
+
+/**
+ * nla_validate - Validate a stream of attributes
+ * @head: head of attribute stream
+ * @len: length of attribute stream
+ * @maxtype: maximum attribute type to be expected
+ * @policy: validation policy
+ *
+ * Validates all attributes in the specified attribute stream against the
+ * specified policy. Attributes with a type exceeding maxtype will be
+ * ignored. See documenation of struct nla_policy for more details.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int nla_validate(struct nlattr *head, int len, int maxtype,
+ const struct nla_policy *policy)
+{
+ struct nlattr *nla;
+ int rem, err;
+
+ nla_for_each_attr(nla, head, len, rem) {
+ err = validate_nla(nla, maxtype, policy);
+ if (err < 0)
+ goto errout;
+ }
+
+ err = 0;
+errout:
+ return err;
+}
+
+/**
+ * nla_policy_len - Determin the max. length of a policy
+ * @policy: policy to use
+ * @n: number of policies
+ *
+ * Determines the max. length of the policy. It is currently used
+ * to allocated Netlink buffers roughly the size of the actual
+ * message.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int
+nla_policy_len(const struct nla_policy *p, int n)
+{
+ int i, len = 0;
+
+ for (i = 0; i < n; i++) {
+ if (p->len)
+ len += nla_total_size(p->len);
+ else if (nla_attr_minlen[p->type])
+ len += nla_total_size(nla_attr_minlen[p->type]);
+ }
+
+ return len;
+}
+
+/**
+ * nla_parse - Parse a stream of attributes into a tb buffer
+ * @tb: destination array with maxtype+1 elements
+ * @maxtype: maximum attribute type to be expected
+ * @head: head of attribute stream
+ * @len: length of attribute stream
+ * @policy: validation policy
+ *
+ * Parses a stream of attributes and stores a pointer to each attribute in
+ * the tb array accessable via the attribute type. Attributes with a type
+ * exceeding maxtype will be silently ignored for backwards compatibility
+ * reasons. policy may be set to NULL if no validation is required.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int nla_parse(struct nlattr *tb[], int maxtype, struct nlattr *head, int len,
+ const struct nla_policy *policy)
+{
+ struct nlattr *nla;
+ int rem, err;
+
+ memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
+
+ nla_for_each_attr(nla, head, len, rem) {
+ u16 type = nla_type(nla);
+
+ if (type > 0 && type <= maxtype) {
+ if (policy) {
+ err = validate_nla(nla, maxtype, policy);
+ if (err < 0)
+ goto errout;
+ }
+
+ tb[type] = nla;
+ }
+ }
+
+ if (unlikely(rem > 0))
+ printk(KERN_WARNING "netlink: %d bytes leftover after parsing "
+ "attributes.\n", rem);
+
+ err = 0;
+errout:
+ return err;
+}
+
+/**
+ * nla_find - Find a specific attribute in a stream of attributes
+ * @head: head of attribute stream
+ * @len: length of attribute stream
+ * @attrtype: type of attribute to look for
+ *
+ * Returns the first attribute in the stream matching the specified type.
+ */
+struct nlattr *nla_find(struct nlattr *head, int len, int attrtype)
+{
+ struct nlattr *nla;
+ int rem;
+
+ nla_for_each_attr(nla, head, len, rem)
+ if (nla_type(nla) == attrtype)
+ return nla;
+
+ return NULL;
+}
+
+/**
+ * nla_strlcpy - Copy string attribute payload into a sized buffer
+ * @dst: where to copy the string to
+ * @nla: attribute to copy the string from
+ * @dstsize: size of destination buffer
+ *
+ * Copies at most dstsize - 1 bytes into the destination buffer.
+ * The result is always a valid NUL-terminated string. Unlike
+ * strlcpy the destination buffer is always padded out.
+ *
+ * Returns the length of the source buffer.
+ */
+size_t nla_strlcpy(char *dst, const struct nlattr *nla, size_t dstsize)
+{
+ size_t srclen = nla_len(nla);
+ char *src = nla_data(nla);
+
+ if (srclen > 0 && src[srclen - 1] == '\0')
+ srclen--;
+
+ if (dstsize > 0) {
+ size_t len = (srclen >= dstsize) ? dstsize - 1 : srclen;
+
+ memset(dst, 0, dstsize);
+ memcpy(dst, src, len);
+ }
+
+ return srclen;
+}
+
+/**
+ * nla_memcpy - Copy a netlink attribute into another memory area
+ * @dest: where to copy to memcpy
+ * @src: netlink attribute to copy from
+ * @count: size of the destination area
+ *
+ * Note: The number of bytes copied is limited by the length of
+ * attribute's payload. memcpy
+ *
+ * Returns the number of bytes copied.
+ */
+int nla_memcpy(void *dest, const struct nlattr *src, int count)
+{
+ int minlen = min_t(int, count, nla_len(src));
+
+ memcpy(dest, nla_data(src), minlen);
+
+ return minlen;
+}
+
+/**
+ * nla_memcmp - Compare an attribute with sized memory area
+ * @nla: netlink attribute
+ * @data: memory area
+ * @size: size of memory area
+ */
+int nla_memcmp(const struct nlattr *nla, const void *data,
+ size_t size)
+{
+ int d = nla_len(nla) - size;
+
+ if (d == 0)
+ d = memcmp(nla_data(nla), data, size);
+
+ return d;
+}
+
+/**
+ * nla_strcmp - Compare a string attribute against a string
+ * @nla: netlink string attribute
+ * @str: another string
+ */
+int nla_strcmp(const struct nlattr *nla, const char *str)
+{
+ int len = strlen(str) + 1;
+ int d = nla_len(nla) - len;
+
+ if (d == 0)
+ d = memcmp(nla_data(nla), str, len);
+
+ return d;
+}
+
+#ifdef CONFIG_NET
+/**
+ * __nla_reserve - reserve room for attribute on the skb
+ * @skb: socket buffer to reserve room on
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ *
+ * Adds a netlink attribute header to a socket buffer and reserves
+ * room for the payload but does not copy it.
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute header and payload.
+ */
+struct nlattr *__nla_reserve(struct sk_buff *skb, int attrtype, int attrlen)
+{
+ struct nlattr *nla;
+
+ nla = (struct nlattr *) skb_put(skb, nla_total_size(attrlen));
+ nla->nla_type = attrtype;
+ nla->nla_len = nla_attr_size(attrlen);
+
+ memset((unsigned char *) nla + nla->nla_len, 0, nla_padlen(attrlen));
+
+ return nla;
+}
+EXPORT_SYMBOL(__nla_reserve);
+
+/**
+ * __nla_reserve_nohdr - reserve room for attribute without header
+ * @skb: socket buffer to reserve room on
+ * @attrlen: length of attribute payload
+ *
+ * Reserves room for attribute payload without a header.
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the payload.
+ */
+void *__nla_reserve_nohdr(struct sk_buff *skb, int attrlen)
+{
+ void *start;
+
+ start = skb_put(skb, NLA_ALIGN(attrlen));
+ memset(start, 0, NLA_ALIGN(attrlen));
+
+ return start;
+}
+EXPORT_SYMBOL(__nla_reserve_nohdr);
+
+/**
+ * nla_reserve - reserve room for attribute on the skb
+ * @skb: socket buffer to reserve room on
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ *
+ * Adds a netlink attribute header to a socket buffer and reserves
+ * room for the payload but does not copy it.
+ *
+ * Returns NULL if the tailroom of the skb is insufficient to store
+ * the attribute header and payload.
+ */
+struct nlattr *nla_reserve(struct sk_buff *skb, int attrtype, int attrlen)
+{
+ if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
+ return NULL;
+
+ return __nla_reserve(skb, attrtype, attrlen);
+}
+EXPORT_SYMBOL(nla_reserve);
+
+/**
+ * nla_reserve_nohdr - reserve room for attribute without header
+ * @skb: socket buffer to reserve room on
+ * @attrlen: length of attribute payload
+ *
+ * Reserves room for attribute payload without a header.
+ *
+ * Returns NULL if the tailroom of the skb is insufficient to store
+ * the attribute payload.
+ */
+void *nla_reserve_nohdr(struct sk_buff *skb, int attrlen)
+{
+ if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
+ return NULL;
+
+ return __nla_reserve_nohdr(skb, attrlen);
+}
+EXPORT_SYMBOL(nla_reserve_nohdr);
+
+/**
+ * __nla_put - Add a netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute header and payload.
+ */
+void __nla_put(struct sk_buff *skb, int attrtype, int attrlen,
+ const void *data)
+{
+ struct nlattr *nla;
+
+ nla = __nla_reserve(skb, attrtype, attrlen);
+ memcpy(nla_data(nla), data, attrlen);
+}
+EXPORT_SYMBOL(__nla_put);
+
+/**
+ * __nla_put_nohdr - Add a netlink attribute without header
+ * @skb: socket buffer to add attribute to
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute payload.
+ */
+void __nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
+{
+ void *start;
+
+ start = __nla_reserve_nohdr(skb, attrlen);
+ memcpy(start, data, attrlen);
+}
+EXPORT_SYMBOL(__nla_put_nohdr);
+
+/**
+ * nla_put - Add a netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
+ * the attribute header and payload.
+ */
+int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data)
+{
+ if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
+ return -EMSGSIZE;
+
+ __nla_put(skb, attrtype, attrlen, data);
+ return 0;
+}
+EXPORT_SYMBOL(nla_put);
+
+/**
+ * nla_put_nohdr - Add a netlink attribute without header
+ * @skb: socket buffer to add attribute to
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
+ * the attribute payload.
+ */
+int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
+{
+ if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
+ return -EMSGSIZE;
+
+ __nla_put_nohdr(skb, attrlen, data);
+ return 0;
+}
+EXPORT_SYMBOL(nla_put_nohdr);
+
+/**
+ * nla_append - Add a netlink attribute without header or padding
+ * @skb: socket buffer to add attribute to
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
+ * the attribute payload.
+ */
+int nla_append(struct sk_buff *skb, int attrlen, const void *data)
+{
+ if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
+ return -EMSGSIZE;
+
+ memcpy(skb_put(skb, attrlen), data, attrlen);
+ return 0;
+}
+EXPORT_SYMBOL(nla_append);
+#endif
+
+EXPORT_SYMBOL(nla_validate);
+EXPORT_SYMBOL(nla_policy_len);
+EXPORT_SYMBOL(nla_parse);
+EXPORT_SYMBOL(nla_find);
+EXPORT_SYMBOL(nla_strlcpy);
+EXPORT_SYMBOL(nla_memcpy);
+EXPORT_SYMBOL(nla_memcmp);
+EXPORT_SYMBOL(nla_strcmp);
diff --git a/lib/zlib_inflate/inflate.h b/lib/zlib_inflate/inflate.h
index df8a6c92052d..3d17b3d1b21f 100644
--- a/lib/zlib_inflate/inflate.h
+++ b/lib/zlib_inflate/inflate.h
@@ -1,3 +1,6 @@
+#ifndef INFLATE_H
+#define INFLATE_H
+
/* inflate.h -- internal inflate state definition
* Copyright (C) 1995-2004 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
@@ -105,3 +108,4 @@ struct inflate_state {
unsigned short work[288]; /* work area for code table building */
code codes[ENOUGH]; /* space for code tables */
};
+#endif
diff --git a/lib/zlib_inflate/inftrees.h b/lib/zlib_inflate/inftrees.h
index 5f5219b1240e..b70b4731ac7a 100644
--- a/lib/zlib_inflate/inftrees.h
+++ b/lib/zlib_inflate/inftrees.h
@@ -1,3 +1,6 @@
+#ifndef INFTREES_H
+#define INFTREES_H
+
/* inftrees.h -- header to use inftrees.c
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
@@ -53,3 +56,4 @@ typedef enum {
extern int zlib_inflate_table (codetype type, unsigned short *lens,
unsigned codes, code **table,
unsigned *bits, unsigned short *work);
+#endif
OpenPOWER on IntegriCloud