diff options
Diffstat (limited to 'kernel/sched/core.c')
| -rw-r--r-- | kernel/sched/core.c | 96 |
1 files changed, 74 insertions, 22 deletions
diff --git a/kernel/sched/core.c b/kernel/sched/core.c index b7c32cb7bfeb..05c39f030314 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -933,6 +933,8 @@ static int effective_prio(struct task_struct *p) /** * task_curr - is this task currently executing on a CPU? * @p: the task in question. + * + * Return: 1 if the task is currently executing. 0 otherwise. */ inline int task_curr(const struct task_struct *p) { @@ -1482,7 +1484,7 @@ static void ttwu_queue(struct task_struct *p, int cpu) * the simpler "current->state = TASK_RUNNING" to mark yourself * runnable without the overhead of this. * - * Returns %true if @p was woken up, %false if it was already running + * Return: %true if @p was woken up, %false if it was already running. * or @state didn't match @p's state. */ static int @@ -1491,7 +1493,13 @@ try_to_wake_up(struct task_struct *p, unsigned int state, int wake_flags) unsigned long flags; int cpu, success = 0; - smp_wmb(); + /* + * If we are going to wake up a thread waiting for CONDITION we + * need to ensure that CONDITION=1 done by the caller can not be + * reordered with p->state check below. This pairs with mb() in + * set_current_state() the waiting thread does. + */ + smp_mb__before_spinlock(); raw_spin_lock_irqsave(&p->pi_lock, flags); if (!(p->state & state)) goto out; @@ -1577,8 +1585,9 @@ out: * @p: The process to be woken up. * * Attempt to wake up the nominated process and move it to the set of runnable - * processes. Returns 1 if the process was woken up, 0 if it was already - * running. + * processes. + * + * Return: 1 if the process was woken up, 0 if it was already running. * * It may be assumed that this function implies a write memory barrier before * changing the task state if and only if any tasks are woken up. @@ -2191,6 +2200,8 @@ void scheduler_tick(void) * This makes sure that uptime, CFS vruntime, load * balancing, etc... continue to move forward, even * with a very low granularity. + * + * Return: Maximum deferment in nanoseconds. */ u64 scheduler_tick_max_deferment(void) { @@ -2394,6 +2405,12 @@ need_resched: if (sched_feat(HRTICK)) hrtick_clear(rq); + /* + * Make sure that signal_pending_state()->signal_pending() below + * can't be reordered with __set_current_state(TASK_INTERRUPTIBLE) + * done by the caller to avoid the race with signal_wake_up(). + */ + smp_mb__before_spinlock(); raw_spin_lock_irq(&rq->lock); switch_count = &prev->nivcsw; @@ -2796,8 +2813,8 @@ EXPORT_SYMBOL(wait_for_completion); * specified timeout to expire. The timeout is in jiffies. It is not * interruptible. * - * The return value is 0 if timed out, and positive (at least 1, or number of - * jiffies left till timeout) if completed. + * Return: 0 if timed out, and positive (at least 1, or number of jiffies left + * till timeout) if completed. */ unsigned long __sched wait_for_completion_timeout(struct completion *x, unsigned long timeout) @@ -2829,8 +2846,8 @@ EXPORT_SYMBOL(wait_for_completion_io); * specified timeout to expire. The timeout is in jiffies. It is not * interruptible. The caller is accounted as waiting for IO. * - * The return value is 0 if timed out, and positive (at least 1, or number of - * jiffies left till timeout) if completed. + * Return: 0 if timed out, and positive (at least 1, or number of jiffies left + * till timeout) if completed. */ unsigned long __sched wait_for_completion_io_timeout(struct completion *x, unsigned long timeout) @@ -2846,7 +2863,7 @@ EXPORT_SYMBOL(wait_for_completion_io_timeout); * This waits for completion of a specific task to be signaled. It is * interruptible. * - * The return value is -ERESTARTSYS if interrupted, 0 if completed. + * Return: -ERESTARTSYS if interrupted, 0 if completed. */ int __sched wait_for_completion_interruptible(struct completion *x) { @@ -2865,8 +2882,8 @@ EXPORT_SYMBOL(wait_for_completion_interruptible); * This waits for either a completion of a specific task to be signaled or for a * specified timeout to expire. It is interruptible. The timeout is in jiffies. * - * The return value is -ERESTARTSYS if interrupted, 0 if timed out, - * positive (at least 1, or number of jiffies left till timeout) if completed. + * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1, + * or number of jiffies left till timeout) if completed. */ long __sched wait_for_completion_interruptible_timeout(struct completion *x, @@ -2883,7 +2900,7 @@ EXPORT_SYMBOL(wait_for_completion_interruptible_timeout); * This waits to be signaled for completion of a specific task. It can be * interrupted by a kill signal. * - * The return value is -ERESTARTSYS if interrupted, 0 if completed. + * Return: -ERESTARTSYS if interrupted, 0 if completed. */ int __sched wait_for_completion_killable(struct completion *x) { @@ -2903,8 +2920,8 @@ EXPORT_SYMBOL(wait_for_completion_killable); * signaled or for a specified timeout to expire. It can be * interrupted by a kill signal. The timeout is in jiffies. * - * The return value is -ERESTARTSYS if interrupted, 0 if timed out, - * positive (at least 1, or number of jiffies left till timeout) if completed. + * Return: -ERESTARTSYS if interrupted, 0 if timed out, positive (at least 1, + * or number of jiffies left till timeout) if completed. */ long __sched wait_for_completion_killable_timeout(struct completion *x, @@ -2918,7 +2935,7 @@ EXPORT_SYMBOL(wait_for_completion_killable_timeout); * try_wait_for_completion - try to decrement a completion without blocking * @x: completion structure * - * Returns: 0 if a decrement cannot be done without blocking + * Return: 0 if a decrement cannot be done without blocking * 1 if a decrement succeeded. * * If a completion is being used as a counting completion, @@ -2945,7 +2962,7 @@ EXPORT_SYMBOL(try_wait_for_completion); * completion_done - Test to see if a completion has any waiters * @x: completion structure * - * Returns: 0 if there are waiters (wait_for_completion() in progress) + * Return: 0 if there are waiters (wait_for_completion() in progress) * 1 if there are no waiters. * */ @@ -3182,7 +3199,7 @@ SYSCALL_DEFINE1(nice, int, increment) * task_prio - return the priority value of a given task. * @p: the task in question. * - * This is the priority value as seen by users in /proc. + * Return: The priority value as seen by users in /proc. * RT tasks are offset by -200. Normal tasks are centered * around 0, value goes from -16 to +15. */ @@ -3194,6 +3211,8 @@ int task_prio(const struct task_struct *p) /** * task_nice - return the nice value of a given task. * @p: the task in question. + * + * Return: The nice value [ -20 ... 0 ... 19 ]. */ int task_nice(const struct task_struct *p) { @@ -3204,6 +3223,8 @@ EXPORT_SYMBOL(task_nice); /** * idle_cpu - is a given cpu idle currently? * @cpu: the processor in question. + * + * Return: 1 if the CPU is currently idle. 0 otherwise. */ int idle_cpu(int cpu) { @@ -3226,6 +3247,8 @@ int idle_cpu(int cpu) /** * idle_task - return the idle task for a given cpu. * @cpu: the processor in question. + * + * Return: The idle task for the cpu @cpu. */ struct task_struct *idle_task(int cpu) { @@ -3235,6 +3258,8 @@ struct task_struct *idle_task(int cpu) /** * find_process_by_pid - find a process with a matching PID value. * @pid: the pid in question. + * + * The task of @pid, if found. %NULL otherwise. */ static struct task_struct *find_process_by_pid(pid_t pid) { @@ -3432,6 +3457,8 @@ recheck: * @policy: new policy. * @param: structure containing the new RT priority. * + * Return: 0 on success. An error code otherwise. + * * NOTE that the task may be already dead. */ int sched_setscheduler(struct task_struct *p, int policy, @@ -3451,6 +3478,8 @@ EXPORT_SYMBOL_GPL(sched_setscheduler); * current context has permission. For example, this is needed in * stop_machine(): we create temporary high priority worker threads, * but our caller might not have that capability. + * + * Return: 0 on success. An error code otherwise. */ int sched_setscheduler_nocheck(struct task_struct *p, int policy, const struct sched_param *param) @@ -3485,6 +3514,8 @@ do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param) * @pid: the pid in question. * @policy: new policy. * @param: structure containing the new RT priority. + * + * Return: 0 on success. An error code otherwise. */ SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy, struct sched_param __user *, param) @@ -3500,6 +3531,8 @@ SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy, * sys_sched_setparam - set/change the RT priority of a thread * @pid: the pid in question. * @param: structure containing the new RT priority. + * + * Return: 0 on success. An error code otherwise. */ SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param) { @@ -3509,6 +3542,9 @@ SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param) /** * sys_sched_getscheduler - get the policy (scheduling class) of a thread * @pid: the pid in question. + * + * Return: On success, the policy of the thread. Otherwise, a negative error + * code. */ SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid) { @@ -3535,6 +3571,9 @@ SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid) * sys_sched_getparam - get the RT priority of a thread * @pid: the pid in question. * @param: structure containing the RT priority. + * + * Return: On success, 0 and the RT priority is in @param. Otherwise, an error + * code. */ SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param) { @@ -3659,6 +3698,8 @@ static int get_user_cpu_mask(unsigned long __user *user_mask_ptr, unsigned len, * @pid: pid of the process * @len: length in bytes of the bitmask pointed to by user_mask_ptr * @user_mask_ptr: user-space pointer to the new cpu mask + * + * Return: 0 on success. An error code otherwise. */ SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len, unsigned long __user *, user_mask_ptr) @@ -3710,6 +3751,8 @@ out_unlock: * @pid: pid of the process * @len: length in bytes of the bitmask pointed to by user_mask_ptr * @user_mask_ptr: user-space pointer to hold the current cpu mask + * + * Return: 0 on success. An error code otherwise. */ SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len, unsigned long __user *, user_mask_ptr) @@ -3744,6 +3787,8 @@ SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len, * * This function yields the current CPU to other tasks. If there are no * other threads running on this CPU then this function will return. + * + * Return: 0. */ SYSCALL_DEFINE0(sched_yield) { @@ -3869,7 +3914,7 @@ EXPORT_SYMBOL(yield); * It's the caller's job to ensure that the target task struct * can't go away on us before we can do any checks. * - * Returns: + * Return: * true (>0) if we indeed boosted the target task. * false (0) if we failed to boost the target. * -ESRCH if there's no task to yield to. @@ -3972,8 +4017,9 @@ long __sched io_schedule_timeout(long timeout) * sys_sched_get_priority_max - return maximum RT priority. * @policy: scheduling class. * - * this syscall returns the maximum rt_priority that can be used - * by a given scheduling class. + * Return: On success, this syscall returns the maximum + * rt_priority that can be used by a given scheduling class. + * On failure, a negative error code is returned. */ SYSCALL_DEFINE1(sched_get_priority_max, int, policy) { @@ -3997,8 +4043,9 @@ SYSCALL_DEFINE1(sched_get_priority_max, int, policy) * sys_sched_get_priority_min - return minimum RT priority. * @policy: scheduling class. * - * this syscall returns the minimum rt_priority that can be used - * by a given scheduling class. + * Return: On success, this syscall returns the minimum + * rt_priority that can be used by a given scheduling class. + * On failure, a negative error code is returned. */ SYSCALL_DEFINE1(sched_get_priority_min, int, policy) { @@ -4024,6 +4071,9 @@ SYSCALL_DEFINE1(sched_get_priority_min, int, policy) * * this syscall writes the default timeslice value of a given process * into the user-space timespec buffer. A value of '0' means infinity. + * + * Return: On success, 0 and the timeslice is in @interval. Otherwise, + * an error code. */ SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid, struct timespec __user *, interval) @@ -6632,6 +6682,8 @@ void normalize_rt_tasks(void) * @cpu: the processor in question. * * ONLY VALID WHEN THE WHOLE SYSTEM IS STOPPED! + * + * Return: The current task for @cpu. */ struct task_struct *curr_task(int cpu) { |
