summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/dma-direction.h6
-rw-r--r--include/linux/pci-dma-compat.h8
-rw-r--r--include/linux/pci.h24
-rw-r--r--include/linux/pci_hotplug.h15
-rw-r--r--include/linux/pci_ids.h1
5 files changed, 37 insertions, 17 deletions
diff --git a/include/linux/dma-direction.h b/include/linux/dma-direction.h
index 3649a031893a..9c96e30e6a0b 100644
--- a/include/linux/dma-direction.h
+++ b/include/linux/dma-direction.h
@@ -1,14 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_DMA_DIRECTION_H
#define _LINUX_DMA_DIRECTION_H
-/*
- * These definitions mirror those in pci.h, so they can be used
- * interchangeably with their PCI_ counterparts.
- */
+
enum dma_data_direction {
DMA_BIDIRECTIONAL = 0,
DMA_TO_DEVICE = 1,
DMA_FROM_DEVICE = 2,
DMA_NONE = 3,
};
+
#endif
diff --git a/include/linux/pci-dma-compat.h b/include/linux/pci-dma-compat.h
index 0dd1a3f7b309..c3f1b44ade29 100644
--- a/include/linux/pci-dma-compat.h
+++ b/include/linux/pci-dma-compat.h
@@ -8,10 +8,10 @@
#include <linux/dma-mapping.h>
/* This defines the direction arg to the DMA mapping routines. */
-#define PCI_DMA_BIDIRECTIONAL 0
-#define PCI_DMA_TODEVICE 1
-#define PCI_DMA_FROMDEVICE 2
-#define PCI_DMA_NONE 3
+#define PCI_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL
+#define PCI_DMA_TODEVICE DMA_TO_DEVICE
+#define PCI_DMA_FROMDEVICE DMA_FROM_DEVICE
+#define PCI_DMA_NONE DMA_NONE
static inline void *
pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 340029b2fb38..b37f2734f9a2 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -299,6 +299,7 @@ struct pci_dev {
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
#ifdef CONFIG_PCIEAER
u16 aer_cap; /* AER capability offset */
+ struct aer_stats *aer_stats; /* AER stats for this device */
#endif
u8 pcie_cap; /* PCIe capability offset */
u8 msi_cap; /* MSI capability offset */
@@ -368,7 +369,6 @@ struct pci_dev {
unsigned int transparent:1; /* Subtractive decode bridge */
unsigned int multifunction:1; /* Multi-function device */
- unsigned int is_added:1;
unsigned int is_busmaster:1; /* Is busmaster */
unsigned int no_msi:1; /* May not use MSI */
unsigned int no_64bit_msi:1; /* May only use 32-bit MSIs */
@@ -388,6 +388,7 @@ struct pci_dev {
unsigned int is_virtfn:1;
unsigned int reset_fn:1;
unsigned int is_hotplug_bridge:1;
+ unsigned int shpc_managed:1; /* SHPC owned by shpchp */
unsigned int is_thunderbolt:1; /* Thunderbolt controller */
unsigned int __aer_firmware_first_valid:1;
unsigned int __aer_firmware_first:1;
@@ -819,6 +820,21 @@ struct pci_driver {
.vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
+/**
+ * PCI_DEVICE_DATA - macro used to describe a specific PCI device in very short form
+ * @vend: the vendor name (without PCI_VENDOR_ID_ prefix)
+ * @dev: the device name (without PCI_DEVICE_ID_<vend>_ prefix)
+ * @data: the driver data to be filled
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_DATA(vend, dev, data) \
+ .vendor = PCI_VENDOR_ID_##vend, .device = PCI_DEVICE_ID_##vend##_##dev, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0, \
+ .driver_data = (kernel_ulong_t)(data)
+
enum {
PCI_REASSIGN_ALL_RSRC = 0x00000001, /* Ignore firmware setup */
PCI_REASSIGN_ALL_BUS = 0x00000002, /* Reassign all bus numbers */
@@ -1240,6 +1256,8 @@ int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
unsigned long pci_address_to_pio(phys_addr_t addr);
phys_addr_t pci_pio_to_address(unsigned long pio);
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr);
+int devm_pci_remap_iospace(struct device *dev, const struct resource *res,
+ phys_addr_t phys_addr);
void pci_unmap_iospace(struct resource *res);
void __iomem *devm_pci_remap_cfgspace(struct device *dev,
resource_size_t offset,
@@ -1468,13 +1486,9 @@ static inline bool pcie_aspm_support_enabled(void) { return false; }
#endif
#ifdef CONFIG_PCIEAER
-void pci_no_aer(void);
bool pci_aer_available(void);
-int pci_aer_init(struct pci_dev *dev);
#else
-static inline void pci_no_aer(void) { }
static inline bool pci_aer_available(void) { return false; }
-static inline int pci_aer_init(struct pci_dev *d) { return -ENODEV; }
#endif
#ifdef CONFIG_PCIE_ECRC
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index cf5e22103f68..a6d6650a0490 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -80,15 +80,12 @@ struct hotplug_slot_info {
* @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
* @info: pointer to the &struct hotplug_slot_info for the initial values for
* this slot.
- * @release: called during pci_hp_deregister to free memory allocated in a
- * hotplug_slot structure.
* @private: used by the hotplug pci controller driver to store whatever it
* needs.
*/
struct hotplug_slot {
struct hotplug_slot_ops *ops;
struct hotplug_slot_info *info;
- void (*release) (struct hotplug_slot *slot);
void *private;
/* Variables below this are for use only by the hotplug pci core. */
@@ -104,13 +101,23 @@ static inline const char *hotplug_slot_name(const struct hotplug_slot *slot)
int __pci_hp_register(struct hotplug_slot *slot, struct pci_bus *pbus, int nr,
const char *name, struct module *owner,
const char *mod_name);
-int pci_hp_deregister(struct hotplug_slot *slot);
+int __pci_hp_initialize(struct hotplug_slot *slot, struct pci_bus *bus, int nr,
+ const char *name, struct module *owner,
+ const char *mod_name);
+int pci_hp_add(struct hotplug_slot *slot);
+
+void pci_hp_del(struct hotplug_slot *slot);
+void pci_hp_destroy(struct hotplug_slot *slot);
+void pci_hp_deregister(struct hotplug_slot *slot);
+
int __must_check pci_hp_change_slot_info(struct hotplug_slot *slot,
struct hotplug_slot_info *info);
/* use a define to avoid include chaining to get THIS_MODULE & friends */
#define pci_hp_register(slot, pbus, devnr, name) \
__pci_hp_register(slot, pbus, devnr, name, THIS_MODULE, KBUILD_MODNAME)
+#define pci_hp_initialize(slot, bus, nr, name) \
+ __pci_hp_initialize(slot, bus, nr, name, THIS_MODULE, KBUILD_MODNAME)
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 29502238e510..381fc009551d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2541,6 +2541,7 @@
#define PCI_DEVICE_ID_NETRONOME_NFP3200 0x3200
#define PCI_DEVICE_ID_NETRONOME_NFP3240 0x3240
#define PCI_DEVICE_ID_NETRONOME_NFP4000 0x4000
+#define PCI_DEVICE_ID_NETRONOME_NFP5000 0x5000
#define PCI_DEVICE_ID_NETRONOME_NFP6000 0x6000
#define PCI_DEVICE_ID_NETRONOME_NFP6000_VF 0x6003
OpenPOWER on IntegriCloud