diff options
Diffstat (limited to 'include')
85 files changed, 1580 insertions, 527 deletions
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index faddde44de8c..3063125197ad 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -265,33 +265,41 @@ static inline void tlb_remove_check_page_size_change(struct mmu_gather *tlb, * For now w.r.t page table cache, mark the range_size as PAGE_SIZE */ +#ifndef pte_free_tlb #define pte_free_tlb(tlb, ptep, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __pte_free_tlb(tlb, ptep, address); \ } while (0) +#endif +#ifndef pmd_free_tlb #define pmd_free_tlb(tlb, pmdp, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __pmd_free_tlb(tlb, pmdp, address); \ } while (0) +#endif #ifndef __ARCH_HAS_4LEVEL_HACK +#ifndef pud_free_tlb #define pud_free_tlb(tlb, pudp, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __pud_free_tlb(tlb, pudp, address); \ } while (0) #endif +#endif #ifndef __ARCH_HAS_5LEVEL_HACK +#ifndef p4d_free_tlb #define p4d_free_tlb(tlb, pudp, address) \ do { \ __tlb_adjust_range(tlb, address, PAGE_SIZE); \ __p4d_free_tlb(tlb, pudp, address); \ } while (0) #endif +#endif #define tlb_migrate_finish(mm) do {} while (0) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index c5dfbdb7271d..f7a19c2a7a80 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -102,25 +102,6 @@ struct pci_controller; #define DRM_SWITCH_POWER_CHANGING 2 #define DRM_SWITCH_POWER_DYNAMIC_OFF 3 -static inline bool drm_core_check_feature(struct drm_device *dev, int feature) -{ - return dev->driver->driver_features & feature; -} - -/** - * drm_drv_uses_atomic_modeset - check if the driver implements - * atomic_commit() - * @dev: DRM device - * - * This check is useful if drivers do not have DRIVER_ATOMIC set but - * have atomic modesetting internally implemented. - */ -static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev) -{ - return drm_core_check_feature(dev, DRIVER_ATOMIC) || - dev->mode_config.funcs->atomic_commit != NULL; -} - /* returns true if currently okay to sleep */ static inline bool drm_can_sleep(void) { diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 26aaba58d6ce..99e2a5297c69 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -100,6 +100,7 @@ int __must_check drm_atomic_helper_swap_state(struct drm_atomic_state *state, int drm_atomic_helper_setup_commit(struct drm_atomic_state *state, bool nonblock); void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *state); +void drm_atomic_helper_fake_vblank(struct drm_atomic_state *state); void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *state); void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *state); diff --git a/include/drm/drm_client.h b/include/drm/drm_client.h new file mode 100644 index 000000000000..989f8e52864d --- /dev/null +++ b/include/drm/drm_client.h @@ -0,0 +1,139 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _DRM_CLIENT_H_ +#define _DRM_CLIENT_H_ + +#include <linux/types.h> + +struct drm_client_dev; +struct drm_device; +struct drm_file; +struct drm_framebuffer; +struct drm_gem_object; +struct drm_minor; +struct module; + +/** + * struct drm_client_funcs - DRM client callbacks + */ +struct drm_client_funcs { + /** + * @owner: The module owner + */ + struct module *owner; + + /** + * @unregister: + * + * Called when &drm_device is unregistered. The client should respond by + * releasing it's resources using drm_client_release(). + * + * This callback is optional. + */ + void (*unregister)(struct drm_client_dev *client); + + /** + * @restore: + * + * Called on drm_lastclose(). The first client instance in the list that + * returns zero gets the privilege to restore and no more clients are + * called. This callback is not called after @unregister has been called. + * + * This callback is optional. + */ + int (*restore)(struct drm_client_dev *client); + + /** + * @hotplug: + * + * Called on drm_kms_helper_hotplug_event(). + * This callback is not called after @unregister has been called. + * + * This callback is optional. + */ + int (*hotplug)(struct drm_client_dev *client); +}; + +/** + * struct drm_client_dev - DRM client instance + */ +struct drm_client_dev { + /** + * @dev: DRM device + */ + struct drm_device *dev; + + /** + * @name: Name of the client. + */ + const char *name; + + /** + * @list: + * + * List of all clients of a DRM device, linked into + * &drm_device.clientlist. Protected by &drm_device.clientlist_mutex. + */ + struct list_head list; + + /** + * @funcs: DRM client functions (optional) + */ + const struct drm_client_funcs *funcs; + + /** + * @file: DRM file + */ + struct drm_file *file; +}; + +int drm_client_new(struct drm_device *dev, struct drm_client_dev *client, + const char *name, const struct drm_client_funcs *funcs); +void drm_client_release(struct drm_client_dev *client); + +void drm_client_dev_unregister(struct drm_device *dev); +void drm_client_dev_hotplug(struct drm_device *dev); +void drm_client_dev_restore(struct drm_device *dev); + +/** + * struct drm_client_buffer - DRM client buffer + */ +struct drm_client_buffer { + /** + * @client: DRM client + */ + struct drm_client_dev *client; + + /** + * @handle: Buffer handle + */ + u32 handle; + + /** + * @pitch: Buffer pitch + */ + u32 pitch; + + /** + * @gem: GEM object backing this buffer + */ + struct drm_gem_object *gem; + + /** + * @vaddr: Virtual address for the buffer + */ + void *vaddr; + + /** + * @fb: DRM framebuffer + */ + struct drm_framebuffer *fb; +}; + +struct drm_client_buffer * +drm_client_framebuffer_create(struct drm_client_dev *client, u32 width, u32 height, u32 format); +void drm_client_framebuffer_delete(struct drm_client_buffer *buffer); + +int drm_client_debugfs_init(struct drm_minor *minor); + +#endif diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index bf0f0f0786d3..97ea41dc678f 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -290,6 +290,10 @@ struct drm_display_info { #define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4) /* data is transmitted LSB to MSB on the bus */ #define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5) +/* drive sync on pos. edge */ +#define DRM_BUS_FLAG_SYNC_POSEDGE (1<<6) +/* drive sync on neg. edge */ +#define DRM_BUS_FLAG_SYNC_NEGEDGE (1<<7) /** * @bus_flags: Additional information (like pixel signal polarity) for @@ -374,12 +378,9 @@ struct drm_tv_connector_state { /** * struct drm_connector_state - mutable connector state - * @connector: backpointer to the connector - * @best_encoder: can be used by helpers and drivers to select the encoder - * @state: backpointer to global drm_atomic_state - * @tv: TV connector state */ struct drm_connector_state { + /** @connector: backpointer to the connector */ struct drm_connector *connector; /** @@ -390,6 +391,13 @@ struct drm_connector_state { */ struct drm_crtc *crtc; + /** + * @best_encoder: + * + * Used by the atomic helpers to select the encoder, through the + * &drm_connector_helper_funcs.atomic_best_encoder or + * &drm_connector_helper_funcs.best_encoder callbacks. + */ struct drm_encoder *best_encoder; /** @@ -398,6 +406,7 @@ struct drm_connector_state { */ enum drm_link_status link_status; + /** @state: backpointer to global drm_atomic_state */ struct drm_atomic_state *state; /** @@ -407,6 +416,7 @@ struct drm_connector_state { */ struct drm_crtc_commit *commit; + /** @tv: TV connector state */ struct drm_tv_connector_state tv; /** @@ -551,8 +561,7 @@ struct drm_connector_funcs { * received for this output connector->edid must be NULL. * * Drivers using the probe helpers should use - * drm_helper_probe_single_connector_modes() or - * drm_helper_probe_single_connector_modes_nomerge() to implement this + * drm_helper_probe_single_connector_modes() to implement this * function. * * RETURNS: @@ -763,45 +772,6 @@ struct drm_cmdline_mode { /** * struct drm_connector - central DRM connector control structure - * @dev: parent DRM device - * @kdev: kernel device for sysfs attributes - * @attr: sysfs attributes - * @head: list management - * @base: base KMS object - * @name: human readable name, can be overwritten by the driver - * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h - * @connector_type_id: index into connector type enum - * @interlace_allowed: can this connector handle interlaced modes? - * @doublescan_allowed: can this connector handle doublescan? - * @stereo_allowed: can this connector handle stereo modes? - * @funcs: connector control functions - * @edid_blob_ptr: DRM property containing EDID if present - * @properties: property tracking for this connector - * @dpms: current dpms state - * @helper_private: mid-layer private data - * @cmdline_mode: mode line parsed from the kernel cmdline for this connector - * @force: a DRM_FORCE_<foo> state for forced mode sets - * @override_edid: has the EDID been overwritten through debugfs for testing? - * @encoder_ids: valid encoders for this connector - * @eld: EDID-like data, if present - * @latency_present: AV delay info from ELD, if found - * @video_latency: video latency info from ELD, if found - * @audio_latency: audio latency info from ELD, if found - * @null_edid_counter: track sinks that give us all zeros for the EDID - * @bad_edid_counter: track sinks that give us an EDID with invalid checksum - * @edid_corrupt: indicates whether the last read EDID was corrupt - * @debugfs_entry: debugfs directory for this connector - * @has_tile: is this connector connected to a tiled monitor - * @tile_group: tile group for the connected monitor - * @tile_is_single_monitor: whether the tile is one monitor housing - * @num_h_tile: number of horizontal tiles in the tile group - * @num_v_tile: number of vertical tiles in the tile group - * @tile_h_loc: horizontal location of this tile - * @tile_v_loc: vertical location of this tile - * @tile_h_size: horizontal size of this tile. - * @tile_v_size: vertical size of this tile. - * @scaling_mode_property: Optional atomic property to control the upscaling. - * @content_protection_property: Optional property to control content protection * * Each connector may be connected to one or more CRTCs, or may be clonable by * another connector if they can share a CRTC. Each connector also has a specific @@ -809,13 +779,27 @@ struct drm_cmdline_mode { * span multiple monitors). */ struct drm_connector { + /** @dev: parent DRM device */ struct drm_device *dev; + /** @kdev: kernel device for sysfs attributes */ struct device *kdev; + /** @attr: sysfs attributes */ struct device_attribute *attr; + + /** + * @head: + * + * List of all connectors on a @dev, linked from + * &drm_mode_config.connector_list. Protected by + * &drm_mode_config.connector_list_lock, but please only use + * &drm_connector_list_iter to walk this list. + */ struct list_head head; + /** @base: base KMS object */ struct drm_mode_object base; + /** @name: human readable name, can be overwritten by the driver */ char *name; /** @@ -833,10 +817,30 @@ struct drm_connector { */ unsigned index; + /** + * @connector_type: + * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h + */ int connector_type; + /** @connector_type_id: index into connector type enum */ int connector_type_id; + /** + * @interlace_allowed: + * Can this connector handle interlaced modes? Only used by + * drm_helper_probe_single_connector_modes() for mode filtering. + */ bool interlace_allowed; + /** + * @doublescan_allowed: + * Can this connector handle doublescan? Only used by + * drm_helper_probe_single_connector_modes() for mode filtering. + */ bool doublescan_allowed; + /** + * @stereo_allowed: + * Can this connector handle stereo modes? Only used by + * drm_helper_probe_single_connector_modes() for mode filtering. + */ bool stereo_allowed; /** @@ -885,45 +889,42 @@ struct drm_connector { * Protected by &drm_mode_config.mutex. */ struct drm_display_info display_info; + + /** @funcs: connector control functions */ const struct drm_connector_funcs *funcs; + /** + * @edid_blob_ptr: DRM property containing EDID if present. Protected by + * &drm_mode_config.mutex. This should be updated only by calling + * drm_connector_update_edid_property(). + */ struct drm_property_blob *edid_blob_ptr; + + /** @properties: property tracking for this connector */ struct drm_object_properties properties; + /** + * @scaling_mode_property: Optional atomic property to control the + * upscaling. See drm_connector_attach_content_protection_property(). + */ struct drm_property *scaling_mode_property; /** * @content_protection_property: DRM ENUM property for content - * protection + * protection. See drm_connector_attach_content_protection_property(). */ struct drm_property *content_protection_property; /** * @path_blob_ptr: * - * DRM blob property data for the DP MST path property. + * DRM blob property data for the DP MST path property. This should only + * be updated by calling drm_connector_set_path_property(). */ struct drm_property_blob *path_blob_ptr; - /** - * @tile_blob_ptr: - * - * DRM blob property data for the tile property (used mostly by DP MST). - * This is meant for screens which are driven through separate display - * pipelines represented by &drm_crtc, which might not be running with - * genlocked clocks. For tiled panels which are genlocked, like - * dual-link LVDS or dual-link DSI, the driver should try to not expose - * the tiling and virtualize both &drm_crtc and &drm_plane if needed. - */ - struct drm_property_blob *tile_blob_ptr; - -/* should we poll this connector for connects and disconnects */ -/* hot plug detectable */ #define DRM_CONNECTOR_POLL_HPD (1 << 0) -/* poll for connections */ #define DRM_CONNECTOR_POLL_CONNECT (1 << 1) -/* can cleanly poll for disconnections without flickering the screen */ -/* DACs should rarely do this without a lot of testing */ #define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2) /** @@ -940,25 +941,40 @@ struct drm_connector { * Periodically poll the connector for connection. * * DRM_CONNECTOR_POLL_DISCONNECT - * Periodically poll the connector for disconnection. + * Periodically poll the connector for disconnection, without + * causing flickering even when the connector is in use. DACs should + * rarely do this without a lot of testing. * * Set to 0 for connectors that don't support connection status * discovery. */ uint8_t polled; - /* requested DPMS state */ + /** + * @dpms: Current dpms state. For legacy drivers the + * &drm_connector_funcs.dpms callback must update this. For atomic + * drivers, this is handled by the core atomic code, and drivers must + * only take &drm_crtc_state.active into account. + */ int dpms; + /** @helper_private: mid-layer private data */ const struct drm_connector_helper_funcs *helper_private; - /* forced on connector */ + /** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */ struct drm_cmdline_mode cmdline_mode; + /** @force: a DRM_FORCE_<foo> state for forced mode sets */ enum drm_connector_force force; + /** @override_edid: has the EDID been overwritten through debugfs for testing? */ bool override_edid; #define DRM_CONNECTOR_MAX_ENCODER 3 + /** + * @encoder_ids: Valid encoders for this connector. Please only use + * drm_connector_for_each_possible_encoder() to enumerate these. + */ uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; + /** * @encoder: Currently bound encoder driving this connector, if any. * Only really meaningful for non-atomic drivers. Atomic drivers should @@ -968,19 +984,37 @@ struct drm_connector { struct drm_encoder *encoder; #define MAX_ELD_BYTES 128 - /* EDID bits */ + /** @eld: EDID-like data, if present */ uint8_t eld[MAX_ELD_BYTES]; + /** @latency_present: AV delay info from ELD, if found */ bool latency_present[2]; - int video_latency[2]; /* [0]: progressive, [1]: interlaced */ + /** + * @video_latency: Video latency info from ELD, if found. + * [0]: progressive, [1]: interlaced + */ + int video_latency[2]; + /** + * @audio_latency: audio latency info from ELD, if found + * [0]: progressive, [1]: interlaced + */ int audio_latency[2]; - int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */ + /** + * @null_edid_counter: track sinks that give us all zeros for the EDID. + * Needed to workaround some HW bugs where we get all 0s + */ + int null_edid_counter; + + /** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */ unsigned bad_edid_counter; - /* Flag for raw EDID header corruption - used in Displayport - * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6 + /** + * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used + * in Displayport compliance testing - Displayport Link CTS Core 1.2 + * rev1.1 4.2.2.6 */ bool edid_corrupt; + /** @debugfs_entry: debugfs directory for this connector */ struct dentry *debugfs_entry; /** @@ -988,7 +1022,7 @@ struct drm_connector { * * Current atomic state for this connector. * - * This is protected by @drm_mode_config.connection_mutex. Note that + * This is protected by &drm_mode_config.connection_mutex. Note that * nonblocking atomic commits access the current connector state without * taking locks. Either by going through the &struct drm_atomic_state * pointers, see for_each_oldnew_connector_in_state(), @@ -999,19 +1033,44 @@ struct drm_connector { */ struct drm_connector_state *state; - /* DisplayID bits */ + /* DisplayID bits. FIXME: Extract into a substruct? */ + + /** + * @tile_blob_ptr: + * + * DRM blob property data for the tile property (used mostly by DP MST). + * This is meant for screens which are driven through separate display + * pipelines represented by &drm_crtc, which might not be running with + * genlocked clocks. For tiled panels which are genlocked, like + * dual-link LVDS or dual-link DSI, the driver should try to not expose + * the tiling and virtualize both &drm_crtc and &drm_plane if needed. + * + * This should only be updated by calling + * drm_connector_set_tile_property(). + */ + struct drm_property_blob *tile_blob_ptr; + + /** @has_tile: is this connector connected to a tiled monitor */ bool has_tile; + /** @tile_group: tile group for the connected monitor */ struct drm_tile_group *tile_group; + /** @tile_is_single_monitor: whether the tile is one monitor housing */ bool tile_is_single_monitor; + /** @num_h_tile: number of horizontal tiles in the tile group */ + /** @num_v_tile: number of vertical tiles in the tile group */ uint8_t num_h_tile, num_v_tile; + /** @tile_h_loc: horizontal location of this tile */ + /** @tile_v_loc: vertical location of this tile */ uint8_t tile_h_loc, tile_v_loc; + /** @tile_h_size: horizontal size of this tile. */ + /** @tile_v_size: vertical size of this tile. */ uint16_t tile_h_size, tile_v_size; /** * @free_node: * - * List used only by &drm_connector_iter to be able to clean up a + * List used only by &drm_connector_list_iter to be able to clean up a * connector from any context, in conjunction with * &drm_mode_config.connector_free_work. */ @@ -1026,7 +1085,7 @@ int drm_connector_init(struct drm_device *dev, int connector_type); int drm_connector_register(struct drm_connector *connector); void drm_connector_unregister(struct drm_connector *connector); -int drm_mode_connector_attach_encoder(struct drm_connector *connector, +int drm_connector_attach_encoder(struct drm_connector *connector, struct drm_encoder *encoder); void drm_connector_cleanup(struct drm_connector *connector); @@ -1132,13 +1191,13 @@ void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame, int drm_mode_create_suggested_offset_properties(struct drm_device *dev); -int drm_mode_connector_set_path_property(struct drm_connector *connector, - const char *path); -int drm_mode_connector_set_tile_property(struct drm_connector *connector); -int drm_mode_connector_update_edid_property(struct drm_connector *connector, - const struct edid *edid); -void drm_mode_connector_set_link_status_property(struct drm_connector *connector, - uint64_t link_status); +int drm_connector_set_path_property(struct drm_connector *connector, + const char *path); +int drm_connector_set_tile_property(struct drm_connector *connector); +int drm_connector_update_edid_property(struct drm_connector *connector, + const struct edid *edid); +void drm_connector_set_link_status_property(struct drm_connector *connector, + uint64_t link_status); int drm_connector_init_panel_orientation_property( struct drm_connector *connector, int width, int height); @@ -1187,6 +1246,9 @@ struct drm_connector * drm_connector_list_iter_next(struct drm_connector_list_iter *iter); void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); +bool drm_connector_has_possible_encoder(struct drm_connector *connector, + struct drm_encoder *encoder); + /** * drm_for_each_connector_iter - connector_list iterator macro * @connector: &struct drm_connector pointer used as cursor @@ -1199,4 +1261,17 @@ void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); #define drm_for_each_connector_iter(connector, iter) \ while ((connector = drm_connector_list_iter_next(iter))) +/** + * drm_connector_for_each_possible_encoder - iterate connector's possible encoders + * @connector: &struct drm_connector pointer + * @encoder: &struct drm_encoder pointer used as cursor + * @__i: int iteration cursor, for macro-internal use + */ +#define drm_connector_for_each_possible_encoder(connector, encoder, __i) \ + for ((__i) = 0; (__i) < ARRAY_SIZE((connector)->encoder_ids) && \ + (connector)->encoder_ids[(__i)] != 0; (__i)++) \ + for_each_if((encoder) = \ + drm_encoder_find((connector)->dev, NULL, \ + (connector)->encoder_ids[(__i)])) \ + #endif diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 23eddbccab10..92e7fc7f05a4 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -77,21 +77,6 @@ struct drm_plane_helper_funcs; /** * struct drm_crtc_state - mutable CRTC state - * @crtc: backpointer to the CRTC - * @enable: whether the CRTC should be enabled, gates all other state - * @active: whether the CRTC is actively displaying (used for DPMS) - * @planes_changed: planes on this crtc are updated - * @mode_changed: @mode or @enable has been changed - * @active_changed: @active has been toggled. - * @connectors_changed: connectors to this crtc have been updated - * @zpos_changed: zpos values of planes on this crtc have been updated - * @color_mgmt_changed: color management properties have changed (degamma or - * gamma LUT or CSC matrix) - * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes - * @connector_mask: bitmask of (1 << drm_connector_index(connector)) of attached connectors - * @encoder_mask: bitmask of (1 << drm_encoder_index(encoder)) of attached encoders - * @mode_blob: &drm_property_blob for @mode - * @state: backpointer to global drm_atomic_state * * Note that the distinction between @enable and @active is rather subtile: * Flipping @active while @enable is set without changing anything else may @@ -102,31 +87,127 @@ struct drm_plane_helper_funcs; * * The three booleans active_changed, connectors_changed and mode_changed are * intended to indicate whether a full modeset is needed, rather than strictly - * describing what has changed in a commit. - * See also: drm_atomic_crtc_needs_modeset() + * describing what has changed in a commit. See also: + * drm_atomic_crtc_needs_modeset() + * + * WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or + * drm_helper_crtc_mode_set_base()) do not maintain many of the derived control + * state like @plane_mask so drivers not converted over to atomic helpers should + * not rely on these being accurate! */ struct drm_crtc_state { + /** @crtc: backpointer to the CRTC */ struct drm_crtc *crtc; + /** + * @enable: Whether the CRTC should be enabled, gates all other state. + * This controls reservations of shared resources. Actual hardware state + * is controlled by @active. + */ bool enable; + + /** + * @active: Whether the CRTC is actively displaying (used for DPMS). + * Implies that @enable is set. The driver must not release any shared + * resources if @active is set to false but @enable still true, because + * userspace expects that a DPMS ON always succeeds. + * + * Hence drivers must not consult @active in their various + * &drm_mode_config_funcs.atomic_check callback to reject an atomic + * commit. They can consult it to aid in the computation of derived + * hardware state, since even in the DPMS OFF state the display hardware + * should be as much powered down as when the CRTC is completely + * disabled through setting @enable to false. + */ bool active; - /* computed state bits used by helpers and drivers */ + /** + * @planes_changed: Planes on this crtc are updated. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. + */ bool planes_changed : 1; + + /** + * @mode_changed: @mode or @enable has been changed. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. See also + * drm_atomic_crtc_needs_modeset(). + * + * Drivers are supposed to set this for any CRTC state changes that + * require a full modeset. They can also reset it to false if e.g. a + * @mode change can be done without a full modeset by only changing + * scaler settings. + */ bool mode_changed : 1; + + /** + * @active_changed: @active has been toggled. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. See also + * drm_atomic_crtc_needs_modeset(). + */ bool active_changed : 1; + + /** + * @connectors_changed: Connectors to this crtc have been updated, + * either in their state or routing. Used by the atomic + * helpers and drivers to steer the atomic commit control flow. See also + * drm_atomic_crtc_needs_modeset(). + * + * Drivers are supposed to set this as-needed from their own atomic + * check code, e.g. from &drm_encoder_helper_funcs.atomic_check + */ bool connectors_changed : 1; + /** + * @zpos_changed: zpos values of planes on this crtc have been updated. + * Used by the atomic helpers and drivers to steer the atomic commit + * control flow. + */ bool zpos_changed : 1; + /** + * @color_mgmt_changed: Color management properties have changed + * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and + * drivers to steer the atomic commit control flow. + */ bool color_mgmt_changed : 1; - /* attached planes bitmask: - * WARNING: transitional helpers do not maintain plane_mask so - * drivers not converted over to atomic helpers should not rely - * on plane_mask being accurate! + /** + * @no_vblank: + * + * Reflects the ability of a CRTC to send VBLANK events. This state + * usually depends on the pipeline configuration, and the main usuage + * is CRTCs feeding a writeback connector operating in oneshot mode. + * In this case the VBLANK event is only generated when a job is queued + * to the writeback connector, and we want the core to fake VBLANK + * events when this part of the pipeline hasn't changed but others had + * or when the CRTC and connectors are being disabled. + * + * __drm_atomic_helper_crtc_duplicate_state() will not reset the value + * from the current state, the CRTC driver is then responsible for + * updating this field when needed. + * + * Note that the combination of &drm_crtc_state.event == NULL and + * &drm_crtc_state.no_blank == true is valid and usually used when the + * writeback connector attached to the CRTC has a new job queued. In + * this case the driver will send the VBLANK event on its own when the + * writeback job is complete. + */ + bool no_vblank : 1; + + /** + * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to + * this CRTC. */ u32 plane_mask; + /** + * @connector_mask: Bitmask of drm_connector_mask(connector) of + * connectors attached to this CRTC. + */ u32 connector_mask; + + /** + * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders + * attached to this CRTC. + */ u32 encoder_mask; /** @@ -136,7 +217,7 @@ struct drm_crtc_state { * differences between the mode requested by userspace in @mode and what * is actually programmed into the hardware. * - * For drivers using drm_bridge, this stores hardware display timings + * For drivers using &drm_bridge, this stores hardware display timings * used between the CRTC and the first bridge. For other drivers, the * meaning of the adjusted_mode field is purely driver implementation * defined information, and will usually be used to store the hardware @@ -161,7 +242,10 @@ struct drm_crtc_state { */ struct drm_display_mode mode; - /* blob property to expose current mode to atomic userspace */ + /** + * @mode_blob: &drm_property_blob for @mode, for exposing the mode to + * atomic userspace. + */ struct drm_property_blob *mode_blob; /** @@ -265,6 +349,7 @@ struct drm_crtc_state { */ struct drm_crtc_commit *commit; + /** @state: backpointer to global drm_atomic_state */ struct drm_atomic_state *state; }; @@ -724,35 +809,25 @@ struct drm_crtc_funcs { /** * struct drm_crtc - central CRTC control structure - * @dev: parent DRM device - * @port: OF node used by drm_of_find_possible_crtcs() - * @head: list management - * @name: human readable name, can be overwritten by the driver - * @mutex: per-CRTC locking - * @base: base KMS object for ID tracking etc. - * @primary: primary plane for this CRTC - * @cursor: cursor plane for this CRTC - * @cursor_x: current x position of the cursor, used for universal cursor planes - * @cursor_y: current y position of the cursor, used for universal cursor planes - * @enabled: is this CRTC enabled? - * @mode: current mode timings - * @hwmode: mode timings as programmed to hw regs - * @x: x position on screen - * @y: y position on screen - * @funcs: CRTC control functions - * @gamma_size: size of gamma ramp - * @gamma_store: gamma ramp values - * @helper_private: mid-layer private data - * @properties: property tracking for this CRTC * * Each CRTC may have one or more connectors associated with it. This structure * allows the CRTC to be controlled. */ struct drm_crtc { + /** @dev: parent DRM device */ struct drm_device *dev; + /** @port: OF node used by drm_of_find_possible_crtcs(). */ struct device_node *port; + /** + * @head: + * + * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list. + * Invariant over the lifetime of @dev and therefore does not need + * locking. + */ struct list_head head; + /** @name: human readable name, can be overwritten by the driver */ char *name; /** @@ -767,10 +842,25 @@ struct drm_crtc { */ struct drm_modeset_lock mutex; + /** @base: base KMS object for ID tracking etc. */ struct drm_mode_object base; - /* primary and cursor planes for CRTC */ + /** + * @primary: + * Primary plane for this CRTC. Note that this is only + * relevant for legacy IOCTL, it specifies the plane implicitly used by + * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance + * beyond that. + */ struct drm_plane *primary; + + /** + * @cursor: + * Cursor plane for this CRTC. Note that this is only relevant for + * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR + * and SETCURSOR2 IOCTLs. It does not have any significance + * beyond that. + */ struct drm_plane *cursor; /** @@ -779,30 +869,94 @@ struct drm_crtc { */ unsigned index; - /* position of cursor plane on crtc */ + /** + * @cursor_x: Current x position of the cursor, used for universal + * cursor planes because the SETCURSOR IOCTL only can update the + * framebuffer without supplying the coordinates. Drivers should not use + * this directly, atomic drivers should look at &drm_plane_state.crtc_x + * of the cursor plane instead. + */ int cursor_x; + /** + * @cursor_y: Current y position of the cursor, used for universal + * cursor planes because the SETCURSOR IOCTL only can update the + * framebuffer without supplying the coordinates. Drivers should not use + * this directly, atomic drivers should look at &drm_plane_state.crtc_y + * of the cursor plane instead. + */ int cursor_y; + /** + * @enabled: + * + * Is this CRTC enabled? Should only be used by legacy drivers, atomic + * drivers should instead consult &drm_crtc_state.enable and + * &drm_crtc_state.active. Atomic drivers can update this by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ bool enabled; - /* Requested mode from modesetting. */ + /** + * @mode: + * + * Current mode timings. Should only be used by legacy drivers, atomic + * drivers should instead consult &drm_crtc_state.mode. Atomic drivers + * can update this by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ struct drm_display_mode mode; - /* Programmed mode in hw, after adjustments for encoders, - * crtc, panel scaling etc. Needed for timestamping etc. + /** + * @hwmode: + * + * Programmed mode in hw, after adjustments for encoders, crtc, panel + * scaling etc. Should only be used by legacy drivers, for high + * precision vblank timestamps in + * drm_calc_vbltimestamp_from_scanoutpos(). + * + * Note that atomic drivers should not use this, but instead use + * &drm_crtc_state.adjusted_mode. And for high-precision timestamps + * drm_calc_vbltimestamp_from_scanoutpos() used &drm_vblank_crtc.hwmode, + * which is filled out by calling drm_calc_timestamping_constants(). */ struct drm_display_mode hwmode; - int x, y; + /** + * @x: + * x position on screen. Should only be used by legacy drivers, atomic + * drivers should look at &drm_plane_state.crtc_x of the primary plane + * instead. Updated by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ + int x; + /** + * @y: + * y position on screen. Should only be used by legacy drivers, atomic + * drivers should look at &drm_plane_state.crtc_y of the primary plane + * instead. Updated by calling + * drm_atomic_helper_update_legacy_modeset_state(). + */ + int y; + + /** @funcs: CRTC control functions */ const struct drm_crtc_funcs *funcs; - /* Legacy FB CRTC gamma size for reporting to userspace */ + /** + * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up + * by calling drm_mode_crtc_set_gamma_size(). + */ uint32_t gamma_size; + + /** + * @gamma_store: Gamma ramp values used by the legacy SETGAMMA and + * GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size(). + */ uint16_t *gamma_store; - /* if you are using the helper */ + /** @helper_private: mid-layer private data */ const struct drm_crtc_helper_funcs *helper_private; + /** @properties: property tracking for this CRTC */ struct drm_object_properties properties; /** @@ -872,7 +1026,6 @@ struct drm_crtc { * * spinlock to protect the fences in the fence_context. */ - spinlock_t fence_lock; /** * @fence_seqno: @@ -942,8 +1095,8 @@ static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc) * drm_crtc_mask - find the mask of a registered CRTC * @crtc: CRTC to find mask for * - * Given a registered CRTC, return the mask bit of that CRTC for an - * encoder's possible_crtcs field. + * Given a registered CRTC, return the mask bit of that CRTC for the + * &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields. */ static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc) { diff --git a/include/drm/drm_debugfs_crc.h b/include/drm/drm_debugfs_crc.h index 7d63b1d4adb9..b225eeb30d05 100644 --- a/include/drm/drm_debugfs_crc.h +++ b/include/drm/drm_debugfs_crc.h @@ -43,6 +43,7 @@ struct drm_crtc_crc_entry { * @lock: protects the fields in this struct * @source: name of the currently configured source of CRCs * @opened: whether userspace has opened the data file for reading + * @overflow: whether an overflow occured. * @entries: array of entries, with size of %DRM_CRC_ENTRIES_NR * @head: head of circular queue * @tail: tail of circular queue @@ -52,7 +53,7 @@ struct drm_crtc_crc_entry { struct drm_crtc_crc { spinlock_t lock; const char *source; - bool opened; + bool opened, overflow; struct drm_crtc_crc_entry *entries; int head, tail; size_t values_cnt; diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h index 858ba19a3e29..f9c6e0e3aec7 100644 --- a/include/drm/drm_device.h +++ b/include/drm/drm_device.h @@ -74,6 +74,27 @@ struct drm_device { struct mutex filelist_mutex; struct list_head filelist; + /** + * @filelist_internal: + * + * List of open DRM files for in-kernel clients. Protected by @filelist_mutex. + */ + struct list_head filelist_internal; + + /** + * @clientlist_mutex: + * + * Protects @clientlist access. + */ + struct mutex clientlist_mutex; + + /** + * @clientlist: + * + * List of in-kernel clients. Protected by @clientlist_mutex. + */ + struct list_head clientlist; + /** \name Memory management */ /*@{ */ struct list_head maplist; /**< Linked list of regions */ diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index c01564991a9f..05cc31b5db16 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1078,6 +1078,25 @@ struct drm_dp_aux_msg { size_t size; }; +struct cec_adapter; +struct edid; + +/** + * struct drm_dp_aux_cec - DisplayPort CEC-Tunneling-over-AUX + * @lock: mutex protecting this struct + * @adap: the CEC adapter for CEC-Tunneling-over-AUX support. + * @name: name of the CEC adapter + * @parent: parent device of the CEC adapter + * @unregister_work: unregister the CEC adapter + */ +struct drm_dp_aux_cec { + struct mutex lock; + struct cec_adapter *adap; + const char *name; + struct device *parent; + struct delayed_work unregister_work; +}; + /** * struct drm_dp_aux - DisplayPort AUX channel * @name: user-visible name of this AUX channel and the I2C-over-AUX adapter @@ -1136,6 +1155,10 @@ struct drm_dp_aux { * @i2c_defer_count: Counts I2C DEFERs, used for DP validation. */ unsigned i2c_defer_count; + /** + * @cec: struct containing fields used for CEC-Tunneling-over-AUX. + */ + struct drm_dp_aux_cec cec; }; ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, @@ -1258,4 +1281,37 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) return desc->quirks & BIT(quirk); } +#ifdef CONFIG_DRM_DP_CEC +void drm_dp_cec_irq(struct drm_dp_aux *aux); +void drm_dp_cec_register_connector(struct drm_dp_aux *aux, const char *name, + struct device *parent); +void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux); +void drm_dp_cec_set_edid(struct drm_dp_aux *aux, const struct edid *edid); +void drm_dp_cec_unset_edid(struct drm_dp_aux *aux); +#else +static inline void drm_dp_cec_irq(struct drm_dp_aux *aux) +{ +} + +static inline void drm_dp_cec_register_connector(struct drm_dp_aux *aux, + const char *name, + struct device *parent) +{ +} + +static inline void drm_dp_cec_unregister_connector(struct drm_dp_aux *aux) +{ +} + +static inline void drm_dp_cec_set_edid(struct drm_dp_aux *aux, + const struct edid *edid) +{ +} + +static inline void drm_dp_cec_unset_edid(struct drm_dp_aux *aux) +{ +} + +#endif + #endif /* _DRM_DP_HELPER_H_ */ diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h index 7e545f5f94d3..46a8009784df 100644 --- a/include/drm/drm_drv.h +++ b/include/drm/drm_drv.h @@ -649,6 +649,35 @@ static inline bool drm_dev_is_unplugged(struct drm_device *dev) return true; } +/** + * drm_core_check_feature - check driver feature flags + * @dev: DRM device to check + * @feature: feature flag + * + * This checks @dev for driver features, see &drm_driver.driver_features and the + * various DRIVER_\* flags. + * + * Returns true if the @feature is supported, false otherwise. + */ +static inline bool drm_core_check_feature(struct drm_device *dev, int feature) +{ + return dev->driver->driver_features & feature; +} + +/** + * drm_drv_uses_atomic_modeset - check if the driver implements + * atomic_commit() + * @dev: DRM device + * + * This check is useful if drivers do not have DRIVER_ATOMIC set but + * have atomic modesetting internally implemented. + */ +static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev) +{ + return drm_core_check_feature(dev, DRIVER_ATOMIC) || + dev->mode_config.funcs->atomic_commit != NULL; +} + int drm_dev_set_unique(struct drm_device *dev, const char *name); diff --git a/include/drm/drm_fb_cma_helper.h b/include/drm/drm_fb_cma_helper.h index d532f88a8d55..96e26e3b9a0c 100644 --- a/include/drm/drm_fb_cma_helper.h +++ b/include/drm/drm_fb_cma_helper.h @@ -16,16 +16,10 @@ struct drm_mode_fb_cmd2; struct drm_plane; struct drm_plane_state; -int drm_fb_cma_fbdev_init_with_funcs(struct drm_device *dev, - unsigned int preferred_bpp, unsigned int max_conn_count, - const struct drm_framebuffer_funcs *funcs); int drm_fb_cma_fbdev_init(struct drm_device *dev, unsigned int preferred_bpp, unsigned int max_conn_count); void drm_fb_cma_fbdev_fini(struct drm_device *dev); -struct drm_fbdev_cma *drm_fbdev_cma_init_with_funcs(struct drm_device *dev, - unsigned int preferred_bpp, unsigned int max_conn_count, - const struct drm_framebuffer_funcs *funcs); struct drm_fbdev_cma *drm_fbdev_cma_init(struct drm_device *dev, unsigned int preferred_bpp, unsigned int max_conn_count); void drm_fbdev_cma_fini(struct drm_fbdev_cma *fbdev_cma); diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index b069433e7fc1..5db08c8f1d25 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -32,6 +32,7 @@ struct drm_fb_helper; +#include <drm/drm_client.h> #include <drm/drm_crtc.h> #include <drm/drm_device.h> #include <linux/kgdb.h> @@ -154,6 +155,20 @@ struct drm_fb_helper_connector { * operations. */ struct drm_fb_helper { + /** + * @client: + * + * DRM client used by the generic fbdev emulation. + */ + struct drm_client_dev client; + + /** + * @buffer: + * + * Framebuffer used by the generic fbdev emulation. + */ + struct drm_client_buffer *buffer; + struct drm_framebuffer *fb; struct drm_device *dev; int crtc_count; @@ -234,6 +249,12 @@ struct drm_fb_helper { int preferred_bpp; }; +static inline struct drm_fb_helper * +drm_fb_helper_from_client(struct drm_client_dev *client) +{ + return container_of(client, struct drm_fb_helper, client); +} + /** * define DRM_FB_HELPER_DEFAULT_OPS - helper define for drm drivers * @@ -330,6 +351,10 @@ void drm_fb_helper_fbdev_teardown(struct drm_device *dev); void drm_fb_helper_lastclose(struct drm_device *dev); void drm_fb_helper_output_poll_changed(struct drm_device *dev); + +int drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper, + struct drm_fb_helper_surface_size *sizes); +int drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp); #else static inline void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper, @@ -564,6 +589,19 @@ static inline void drm_fb_helper_output_poll_changed(struct drm_device *dev) { } +static inline int +drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper, + struct drm_fb_helper_surface_size *sizes) +{ + return 0; +} + +static inline int +drm_fbdev_generic_setup(struct drm_device *dev, unsigned int preferred_bpp) +{ + return 0; +} + #endif static inline int diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h index 3e86408dac9f..f9c15845f465 100644 --- a/include/drm/drm_fourcc.h +++ b/include/drm/drm_fourcc.h @@ -39,6 +39,7 @@ struct drm_mode_fb_cmd2; * @hsub: Horizontal chroma subsampling factor * @vsub: Vertical chroma subsampling factor * @has_alpha: Does the format embeds an alpha component? + * @is_yuv: Is it a YUV format? */ struct drm_format_info { u32 format; @@ -48,6 +49,7 @@ struct drm_format_info { u8 hsub; u8 vsub; bool has_alpha; + bool is_yuv; }; /** diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index b159fe07fcf9..baded6514456 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -530,7 +530,7 @@ drm_mode_validate_ycbcr420(const struct drm_display_mode *mode, void drm_mode_prune_invalid(struct drm_device *dev, struct list_head *mode_list, bool verbose); void drm_mode_sort(struct list_head *mode_list); -void drm_mode_connector_list_update(struct drm_connector *connector); +void drm_connector_list_update(struct drm_connector *connector); /* parsing cmdline modes */ bool diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index 3b289773297c..61142aa0ab23 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -785,7 +785,7 @@ struct drm_connector_helper_funcs { * * This function should fill in all modes currently valid for the sink * into the &drm_connector.probed_modes list. It should also update the - * EDID property by calling drm_mode_connector_update_edid_property(). + * EDID property by calling drm_connector_update_edid_property(). * * The usual way to implement this is to cache the EDID retrieved in the * probe callback somewhere in the driver-private connector structure. @@ -980,11 +980,15 @@ struct drm_connector_helper_funcs { * * This hook is to be used by drivers implementing writeback connectors * that need a point when to commit the writeback job to the hardware. + * The writeback_job to commit is available in + * &drm_connector_state.writeback_job. + * + * This hook is optional. * * This callback is used by the atomic modeset helpers. */ void (*atomic_commit)(struct drm_connector *connector, - struct drm_writeback_job *writeback_job); + struct drm_connector_state *state); }; /** diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index 26a1b5fd8796..582a0ec0aa70 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -200,7 +200,7 @@ struct drm_panel *of_drm_find_panel(const struct device_node *np); #else static inline struct drm_panel *of_drm_find_panel(const struct device_node *np) { - return NULL; + return ERR_PTR(-ENODEV); } #endif diff --git a/include/drm/drm_pci.h b/include/drm/drm_pci.h index 674599025d7d..8181e9e7cf1d 100644 --- a/include/drm/drm_pci.h +++ b/include/drm/drm_pci.h @@ -58,11 +58,4 @@ static inline int drm_get_pci_dev(struct pci_dev *pdev, } #endif -#define DRM_PCIE_SPEED_25 1 -#define DRM_PCIE_SPEED_50 2 -#define DRM_PCIE_SPEED_80 4 - -int drm_pcie_get_speed_cap_mask(struct drm_device *dev, u32 *speed_mask); -int drm_pcie_get_max_link_width(struct drm_device *dev, u32 *mlw); - #endif /* _DRM_PCI_H_ */ diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index cee9dfaaa740..8a152dc16ea5 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -34,31 +34,15 @@ struct drm_modeset_acquire_ctx; /** * struct drm_plane_state - mutable plane state - * @plane: backpointer to the plane - * @crtc_w: width of visible portion of plane on crtc - * @crtc_h: height of visible portion of plane on crtc - * @src_x: left position of visible portion of plane within - * plane (in 16.16) - * @src_y: upper position of visible portion of plane within - * plane (in 16.16) - * @src_w: width of visible portion of plane (in 16.16) - * @src_h: height of visible portion of plane (in 16.16) - * @alpha: opacity of the plane - * @rotation: rotation of the plane - * @zpos: priority of the given plane on crtc (optional) - * Note that multiple active planes on the same crtc can have an identical - * zpos value. The rule to solving the conflict is to compare the plane - * object IDs; the plane with a higher ID must be stacked on top of a - * plane with a lower ID. - * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1 - * where N is the number of active planes for given crtc. Note that - * the driver must set drm_mode_config.normalize_zpos or call - * drm_atomic_normalize_zpos() to update this before it can be trusted. - * @src: clipped source coordinates of the plane (in 16.16) - * @dst: clipped destination coordinates of the plane - * @state: backpointer to global drm_atomic_state + * + * Please not that the destination coordinates @crtc_x, @crtc_y, @crtc_h and + * @crtc_w and the source coordinates @src_x, @src_y, @src_h and @src_w are the + * raw coordinates provided by userspace. Drivers should use + * drm_atomic_helper_check_plane_state() and only use the derived rectangles in + * @src and @dst to program the hardware. */ struct drm_plane_state { + /** @plane: backpointer to the plane */ struct drm_plane *plane; /** @@ -87,7 +71,7 @@ struct drm_plane_state { * preserved. * * Drivers should store any implicit fence in this from their - * &drm_plane_helper.prepare_fb callback. See drm_gem_fb_prepare_fb() + * &drm_plane_helper_funcs.prepare_fb callback. See drm_gem_fb_prepare_fb() * and drm_gem_fb_simple_display_pipe_prepare_fb() for suitable helpers. */ struct dma_fence *fence; @@ -108,20 +92,60 @@ struct drm_plane_state { */ int32_t crtc_y; + /** @crtc_w: width of visible portion of plane on crtc */ + /** @crtc_h: height of visible portion of plane on crtc */ uint32_t crtc_w, crtc_h; - /* Source values are 16.16 fixed point */ - uint32_t src_x, src_y; + /** + * @src_x: left position of visible portion of plane within plane (in + * 16.16 fixed point). + */ + uint32_t src_x; + /** + * @src_y: upper position of visible portion of plane within plane (in + * 16.16 fixed point). + */ + uint32_t src_y; + /** @src_w: width of visible portion of plane (in 16.16) */ + /** @src_h: height of visible portion of plane (in 16.16) */ uint32_t src_h, src_w; - /* Plane opacity */ + /** + * @alpha: + * Opacity of the plane with 0 as completely transparent and 0xffff as + * completely opaque. See drm_plane_create_alpha_property() for more + * details. + */ u16 alpha; - /* Plane rotation */ + /** + * @rotation: + * Rotation of the plane. See drm_plane_create_rotation_property() for + * more details. + */ unsigned int rotation; - /* Plane zpos */ + /** + * @zpos: + * Priority of the given plane on crtc (optional). + * + * Note that multiple active planes on the same crtc can have an + * identical zpos value. The rule to solving the conflict is to compare + * the plane object IDs; the plane with a higher ID must be stacked on + * top of a plane with a lower ID. + * + * See drm_plane_create_zpos_property() and + * drm_plane_create_zpos_immutable_property() for more details. + */ unsigned int zpos; + + /** + * @normalized_zpos: + * Normalized value of zpos: unique, range from 0 to N-1 where N is the + * number of active planes for given crtc. Note that the driver must set + * &drm_mode_config.normalize_zpos or call drm_atomic_normalize_zpos() to + * update this before it can be trusted. + */ unsigned int normalized_zpos; /** @@ -138,7 +162,8 @@ struct drm_plane_state { */ enum drm_color_range color_range; - /* Clipped coordinates */ + /** @src: clipped source coordinates of the plane (in 16.16) */ + /** @dst: clipped destination coordinates of the plane */ struct drm_rect src, dst; /** @@ -157,6 +182,7 @@ struct drm_plane_state { */ struct drm_crtc_commit *commit; + /** @state: backpointer to global drm_atomic_state */ struct drm_atomic_state *state; }; @@ -499,30 +525,27 @@ enum drm_plane_type { /** * struct drm_plane - central DRM plane control structure - * @dev: DRM device this plane belongs to - * @head: for list management - * @name: human readable name, can be overwritten by the driver - * @base: base mode object - * @possible_crtcs: pipes this plane can be bound to - * @format_types: array of formats supported by this plane - * @format_count: number of formats supported - * @format_default: driver hasn't supplied supported formats for the plane - * @modifiers: array of modifiers supported by this plane - * @modifier_count: number of modifiers supported - * @old_fb: Temporary tracking of the old fb while a modeset is ongoing. Used by - * drm_mode_set_config_internal() to implement correct refcounting. - * @funcs: helper functions - * @properties: property tracking for this plane - * @type: type of plane (overlay, primary, cursor) - * @alpha_property: alpha property for this plane - * @zpos_property: zpos property for this plane - * @rotation_property: rotation property for this plane - * @helper_private: mid-layer private data + * + * Planes represent the scanout hardware of a display block. They receive their + * input data from a &drm_framebuffer and feed it to a &drm_crtc. Planes control + * the color conversion, see `Plane Composition Properties`_ for more details, + * and are also involved in the color conversion of input pixels, see `Color + * Management Properties`_ for details on that. */ struct drm_plane { + /** @dev: DRM device this plane belongs to */ struct drm_device *dev; + + /** + * @head: + * + * List of all planes on @dev, linked from &drm_mode_config.plane_list. + * Invariant over the lifetime of @dev and therefore does not need + * locking. + */ struct list_head head; + /** @name: human readable name, can be overwritten by the driver */ char *name; /** @@ -536,35 +559,62 @@ struct drm_plane { */ struct drm_modeset_lock mutex; + /** @base: base mode object */ struct drm_mode_object base; + /** + * @possible_crtcs: pipes this plane can be bound to constructed from + * drm_crtc_mask() + */ uint32_t possible_crtcs; + /** @format_types: array of formats supported by this plane */ uint32_t *format_types; + /** @format_count: Size of the array pointed at by @format_types. */ unsigned int format_count; + /** + * @format_default: driver hasn't supplied supported formats for the + * plane. Used by the drm_plane_init compatibility wrapper only. + */ bool format_default; + /** @modifiers: array of modifiers supported by this plane */ uint64_t *modifiers; + /** @modifier_count: Size of the array pointed at by @modifier_count. */ unsigned int modifier_count; /** - * @crtc: Currently bound CRTC, only really meaningful for non-atomic - * drivers. Atomic drivers should instead check &drm_plane_state.crtc. + * @crtc: + * + * Currently bound CRTC, only meaningful for non-atomic drivers. For + * atomic drivers this is forced to be NULL, atomic drivers should + * instead check &drm_plane_state.crtc. */ struct drm_crtc *crtc; /** - * @fb: Currently bound framebuffer, only really meaningful for - * non-atomic drivers. Atomic drivers should instead check - * &drm_plane_state.fb. + * @fb: + * + * Currently bound framebuffer, only meaningful for non-atomic drivers. + * For atomic drivers this is forced to be NULL, atomic drivers should + * instead check &drm_plane_state.fb. */ struct drm_framebuffer *fb; + /** + * @old_fb: + * + * Temporary tracking of the old fb while a modeset is ongoing. Only + * used by non-atomic drivers, forced to be NULL for atomic drivers. + */ struct drm_framebuffer *old_fb; + /** @funcs: plane control functions */ const struct drm_plane_funcs *funcs; + /** @properties: property tracking for this plane */ struct drm_object_properties properties; + /** @type: Type of plane, see &enum drm_plane_type for details. */ enum drm_plane_type type; /** @@ -573,6 +623,7 @@ struct drm_plane { */ unsigned index; + /** @helper_private: mid-layer private data */ const struct drm_plane_helper_funcs *helper_private; /** @@ -590,8 +641,23 @@ struct drm_plane { */ struct drm_plane_state *state; + /** + * @alpha_property: + * Optional alpha property for this plane. See + * drm_plane_create_alpha_property(). + */ struct drm_property *alpha_property; + /** + * @zpos_property: + * Optional zpos property for this plane. See + * drm_plane_create_zpos_property(). + */ struct drm_property *zpos_property; + /** + * @rotation_property: + * Optional rotation property for this plane. See + * drm_plane_create_rotation_property(). + */ struct drm_property *rotation_property; /** diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h index e1a46e9991cc..f3e6eed3e79c 100644 --- a/include/drm/drm_print.h +++ b/include/drm/drm_print.h @@ -69,16 +69,21 @@ struct drm_printer { /* private: */ void (*printfn)(struct drm_printer *p, struct va_format *vaf); + void (*puts)(struct drm_printer *p, const char *str); void *arg; const char *prefix; }; +void __drm_printfn_coredump(struct drm_printer *p, struct va_format *vaf); +void __drm_puts_coredump(struct drm_printer *p, const char *str); void __drm_printfn_seq_file(struct drm_printer *p, struct va_format *vaf); +void __drm_puts_seq_file(struct drm_printer *p, const char *str); void __drm_printfn_info(struct drm_printer *p, struct va_format *vaf); void __drm_printfn_debug(struct drm_printer *p, struct va_format *vaf); __printf(2, 3) void drm_printf(struct drm_printer *p, const char *f, ...); +void drm_puts(struct drm_printer *p, const char *str); __printf(2, 0) /** @@ -105,6 +110,71 @@ drm_vprintf(struct drm_printer *p, const char *fmt, va_list *va) drm_printf((printer), "%.*s" fmt, (indent), "\t\t\t\t\tX", ##__VA_ARGS__) /** + * struct drm_print_iterator - local struct used with drm_printer_coredump + * @data: Pointer to the devcoredump output buffer + * @start: The offset within the buffer to start writing + * @remain: The number of bytes to write for this iteration + */ +struct drm_print_iterator { + void *data; + ssize_t start; + ssize_t remain; + /* private: */ + ssize_t offset; +}; + +/** + * drm_coredump_printer - construct a &drm_printer that can output to a buffer + * from the read function for devcoredump + * @iter: A pointer to a struct drm_print_iterator for the read instance + * + * This wrapper extends drm_printf() to work with a dev_coredumpm() callback + * function. The passed in drm_print_iterator struct contains the buffer + * pointer, size and offset as passed in from devcoredump. + * + * For example:: + * + * void coredump_read(char *buffer, loff_t offset, size_t count, + * void *data, size_t datalen) + * { + * struct drm_print_iterator iter; + * struct drm_printer p; + * + * iter.data = buffer; + * iter.start = offset; + * iter.remain = count; + * + * p = drm_coredump_printer(&iter); + * + * drm_printf(p, "foo=%d\n", foo); + * } + * + * void makecoredump(...) + * { + * ... + * dev_coredumpm(dev, THIS_MODULE, data, 0, GFP_KERNEL, + * coredump_read, ...) + * } + * + * RETURNS: + * The &drm_printer object + */ +static inline struct drm_printer +drm_coredump_printer(struct drm_print_iterator *iter) +{ + struct drm_printer p = { + .printfn = __drm_printfn_coredump, + .puts = __drm_puts_coredump, + .arg = iter, + }; + + /* Set the internal offset of the iterator to zero */ + iter->offset = 0; + + return p; +} + +/** * drm_seq_file_printer - construct a &drm_printer that outputs to &seq_file * @f: the &struct seq_file to output to * @@ -115,6 +185,7 @@ static inline struct drm_printer drm_seq_file_printer(struct seq_file *f) { struct drm_printer p = { .printfn = __drm_printfn_seq_file, + .puts = __drm_puts_seq_file, .arg = f, }; return p; @@ -195,6 +266,7 @@ static inline struct drm_printer drm_debug_printer(const char *prefix) #define DRM_UT_VBL 0x20 #define DRM_UT_STATE 0x40 #define DRM_UT_LEASE 0x80 +#define DRM_UT_DP 0x100 __printf(3, 4) void drm_dev_printk(const struct device *dev, const char *level, @@ -307,6 +379,11 @@ void drm_err(const char *format, ...); #define DRM_DEBUG_LEASE(fmt, ...) \ drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__) +#define DRM_DEV_DEBUG_DP(dev, fmt, ...) \ + drm_dev_dbg(dev, DRM_UT_DP, fmt, ## __VA_ARGS__) +#define DRM_DEBUG_DP(dev, fmt, ...) \ + drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__) + #define _DRM_DEV_DEFINE_DEBUG_RATELIMITED(dev, category, fmt, ...) \ ({ \ static DEFINE_RATELIMIT_STATE(_rs, \ diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h index 1d5c0b2a8956..c030f6ccab99 100644 --- a/include/drm/drm_property.h +++ b/include/drm/drm_property.h @@ -147,10 +147,10 @@ struct drm_property { * properties are not exposed to legacy userspace. * * DRM_MODE_PROP_IMMUTABLE - * Set for properties where userspace cannot be changed by + * Set for properties whose values cannot be changed by * userspace. The kernel is allowed to update the value of these * properties. This is generally used to expose probe state to - * usersapce, e.g. the EDID, or the connector path property on DP + * userspace, e.g. the EDID, or the connector path property on DP * MST sinks. */ uint32_t flags; diff --git a/include/drm/drm_vma_manager.h b/include/drm/drm_vma_manager.h index 8758df94e9a0..c7987daeaed0 100644 --- a/include/drm/drm_vma_manager.h +++ b/include/drm/drm_vma_manager.h @@ -41,6 +41,7 @@ struct drm_vma_offset_node { rwlock_t vm_lock; struct drm_mm_node vm_node; struct rb_root vm_files; + bool readonly:1; }; struct drm_vma_offset_manager { diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h index a10fe556dfd4..23df9d463003 100644 --- a/include/drm/drm_writeback.h +++ b/include/drm/drm_writeback.h @@ -110,6 +110,12 @@ struct drm_writeback_job { struct dma_fence *out_fence; }; +static inline struct drm_writeback_connector * +drm_connector_to_writeback(struct drm_connector *connector) +{ + return container_of(connector, struct drm_writeback_connector, base); +} + int drm_writeback_connector_init(struct drm_device *dev, struct drm_writeback_connector *wb_connector, const struct drm_connector_funcs *con_funcs, diff --git a/include/drm/gpu_scheduler.h b/include/drm/gpu_scheduler.h index 7c2dfd6cc1af..091b9afcd184 100644 --- a/include/drm/gpu_scheduler.h +++ b/include/drm/gpu_scheduler.h @@ -52,7 +52,6 @@ enum drm_sched_priority { * runqueue. * @rq: runqueue to which this entity belongs. * @rq_lock: lock to modify the runqueue to which this entity belongs. - * @sched: the scheduler instance to which this entity is enqueued. * @job_queue: the list of jobs of this entity. * @fence_seq: a linearly increasing seqno incremented with each * new &drm_sched_fence which is part of the entity. @@ -76,7 +75,6 @@ struct drm_sched_entity { struct list_head list; struct drm_sched_rq *rq; spinlock_t rq_lock; - struct drm_gpu_scheduler *sched; struct spsc_queue job_queue; @@ -93,6 +91,7 @@ struct drm_sched_entity { * struct drm_sched_rq - queue of entities to be scheduled. * * @lock: to modify the entities list. + * @sched: the scheduler to which this rq belongs to. * @entities: list of the entities to be scheduled. * @current_entity: the entity which is to be scheduled. * @@ -102,6 +101,7 @@ struct drm_sched_entity { */ struct drm_sched_rq { spinlock_t lock; + struct drm_gpu_scheduler *sched; struct list_head entities; struct drm_sched_entity *current_entity; }; @@ -280,16 +280,13 @@ int drm_sched_init(struct drm_gpu_scheduler *sched, const char *name); void drm_sched_fini(struct drm_gpu_scheduler *sched); -int drm_sched_entity_init(struct drm_gpu_scheduler *sched, - struct drm_sched_entity *entity, - struct drm_sched_rq *rq, +int drm_sched_entity_init(struct drm_sched_entity *entity, + struct drm_sched_rq **rq_list, + unsigned int num_rq_list, atomic_t *guilty); -long drm_sched_entity_do_release(struct drm_gpu_scheduler *sched, - struct drm_sched_entity *entity, long timeout); -void drm_sched_entity_cleanup(struct drm_gpu_scheduler *sched, - struct drm_sched_entity *entity); -void drm_sched_entity_fini(struct drm_gpu_scheduler *sched, - struct drm_sched_entity *entity); +long drm_sched_entity_flush(struct drm_sched_entity *entity, long timeout); +void drm_sched_entity_fini(struct drm_sched_entity *entity); +void drm_sched_entity_destroy(struct drm_sched_entity *entity); void drm_sched_entity_push_job(struct drm_sched_job *sched_job, struct drm_sched_entity *entity); void drm_sched_entity_set_rq(struct drm_sched_entity *entity, @@ -300,7 +297,6 @@ struct drm_sched_fence *drm_sched_fence_create( void drm_sched_fence_scheduled(struct drm_sched_fence *fence); void drm_sched_fence_finished(struct drm_sched_fence *fence); int drm_sched_job_init(struct drm_sched_job *job, - struct drm_gpu_scheduler *sched, struct drm_sched_entity *entity, void *owner); void drm_sched_hw_job_reset(struct drm_gpu_scheduler *sched, diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index c9e5a6621b95..c44703f471b3 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -95,7 +95,9 @@ extern struct resource intel_graphics_stolen_res; #define I845_TSEG_SIZE_512K (2 << 1) #define I845_TSEG_SIZE_1M (3 << 1) -#define INTEL_BSM 0x5c +#define INTEL_BSM 0x5c +#define INTEL_GEN11_BSM_DW0 0xc0 +#define INTEL_GEN11_BSM_DW1 0xc4 #define INTEL_BSM_MASK (-(1u << 20)) #endif /* _I915_DRM_H_ */ diff --git a/include/drm/tinydrm/tinydrm.h b/include/drm/tinydrm/tinydrm.h index 56e4a916b5e8..fe9827d0ca8a 100644 --- a/include/drm/tinydrm/tinydrm.h +++ b/include/drm/tinydrm/tinydrm.h @@ -16,16 +16,31 @@ /** * struct tinydrm_device - tinydrm device - * @drm: DRM device - * @pipe: Display pipe structure - * @dirty_lock: Serializes framebuffer flushing - * @fb_funcs: Framebuffer functions used when creating framebuffers */ struct tinydrm_device { + /** + * @drm: DRM device + */ struct drm_device *drm; + + /** + * @pipe: Display pipe structure + */ struct drm_simple_display_pipe pipe; + + /** + * @dirty_lock: Serializes framebuffer flushing + */ struct mutex dirty_lock; + + /** + * @fb_funcs: Framebuffer functions used when creating framebuffers + */ const struct drm_framebuffer_funcs *fb_funcs; + + /** + * @fb_dirty: Framebuffer dirty callback + */ int (*fb_dirty)(struct drm_framebuffer *framebuffer, struct drm_file *file_priv, unsigned flags, unsigned color, struct drm_clip_rect *clips, diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index c67977aa1a0e..a01ba2032f0e 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -284,17 +284,29 @@ struct ttm_operation_ctx { #define TTM_OPT_FLAG_FORCE_ALLOC 0x2 /** + * ttm_bo_get - reference a struct ttm_buffer_object + * + * @bo: The buffer object. + */ +static inline void ttm_bo_get(struct ttm_buffer_object *bo) +{ + kref_get(&bo->kref); +} + +/** * ttm_bo_reference - reference a struct ttm_buffer_object * * @bo: The buffer object. * * Returns a refcounted pointer to a buffer object. + * + * This function is deprecated. Use @ttm_bo_get instead. */ static inline struct ttm_buffer_object * ttm_bo_reference(struct ttm_buffer_object *bo) { - kref_get(&bo->kref); + ttm_bo_get(bo); return bo; } @@ -346,11 +358,22 @@ int ttm_bo_validate(struct ttm_buffer_object *bo, struct ttm_operation_ctx *ctx); /** + * ttm_bo_put + * + * @bo: The buffer object. + * + * Unreference a buffer object. + */ +void ttm_bo_put(struct ttm_buffer_object *bo); + +/** * ttm_bo_unref * * @bo: The buffer object. * * Unreference and clear a pointer to a buffer object. + * + * This function is deprecated. Use @ttm_bo_put instead. */ void ttm_bo_unref(struct ttm_buffer_object **bo); diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h index 9564597cbfac..0aa1d9c3e0b9 100644 --- a/include/dt-bindings/clock/imx6ul-clock.h +++ b/include/dt-bindings/clock/imx6ul-clock.h @@ -235,27 +235,25 @@ #define IMX6UL_CLK_CSI_PODF 222 #define IMX6UL_CLK_PLL3_120M 223 #define IMX6UL_CLK_KPP 224 -#define IMX6UL_CLK_CKO1_SEL 225 -#define IMX6UL_CLK_CKO1_PODF 226 -#define IMX6UL_CLK_CKO1 227 -#define IMX6UL_CLK_CKO2_SEL 228 -#define IMX6UL_CLK_CKO2_PODF 229 -#define IMX6UL_CLK_CKO2 230 -#define IMX6UL_CLK_CKO 231 - -/* For i.MX6ULL */ -#define IMX6ULL_CLK_ESAI_PRED 232 -#define IMX6ULL_CLK_ESAI_PODF 233 -#define IMX6ULL_CLK_ESAI_EXTAL 234 -#define IMX6ULL_CLK_ESAI_MEM 235 -#define IMX6ULL_CLK_ESAI_IPG 236 -#define IMX6ULL_CLK_DCP_CLK 237 -#define IMX6ULL_CLK_EPDC_PRE_SEL 238 -#define IMX6ULL_CLK_EPDC_SEL 239 -#define IMX6ULL_CLK_EPDC_PODF 240 -#define IMX6ULL_CLK_EPDC_ACLK 241 -#define IMX6ULL_CLK_EPDC_PIX 242 -#define IMX6ULL_CLK_ESAI_SEL 243 +#define IMX6ULL_CLK_ESAI_PRED 225 +#define IMX6ULL_CLK_ESAI_PODF 226 +#define IMX6ULL_CLK_ESAI_EXTAL 227 +#define IMX6ULL_CLK_ESAI_MEM 228 +#define IMX6ULL_CLK_ESAI_IPG 229 +#define IMX6ULL_CLK_DCP_CLK 230 +#define IMX6ULL_CLK_EPDC_PRE_SEL 231 +#define IMX6ULL_CLK_EPDC_SEL 232 +#define IMX6ULL_CLK_EPDC_PODF 233 +#define IMX6ULL_CLK_EPDC_ACLK 234 +#define IMX6ULL_CLK_EPDC_PIX 235 +#define IMX6ULL_CLK_ESAI_SEL 236 +#define IMX6UL_CLK_CKO1_SEL 237 +#define IMX6UL_CLK_CKO1_PODF 238 +#define IMX6UL_CLK_CKO1 239 +#define IMX6UL_CLK_CKO2_SEL 240 +#define IMX6UL_CLK_CKO2_PODF 241 +#define IMX6UL_CLK_CKO2 242 +#define IMX6UL_CLK_CKO 243 #define IMX6UL_CLK_END 244 #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */ diff --git a/include/linux/ascii85.h b/include/linux/ascii85.h new file mode 100644 index 000000000000..4cc40201273e --- /dev/null +++ b/include/linux/ascii85.h @@ -0,0 +1,38 @@ +/* + * SPDX-License-Identifier: GPL-2.0 + * + * Copyright (c) 2008 Intel Corporation + * Copyright (c) 2018 The Linux Foundation. All rights reserved. + */ + +#ifndef _ASCII85_H_ +#define _ASCII85_H_ + +#include <linux/kernel.h> + +#define ASCII85_BUFSZ 6 + +static inline long +ascii85_encode_len(long len) +{ + return DIV_ROUND_UP(len, 4); +} + +static inline const char * +ascii85_encode(u32 in, char *out) +{ + int i; + + if (in == 0) + return "z"; + + out[5] = '\0'; + for (i = 5; i--; ) { + out[i] = '!' + in % 85; + in /= 85; + } + + return out; +} + +#endif diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index e3147eb74222..ca3f2c2edd85 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -287,6 +287,20 @@ void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues); void blk_mq_quiesce_queue_nowait(struct request_queue *q); +/** + * blk_mq_mark_complete() - Set request state to complete + * @rq: request to set to complete state + * + * Returns true if request state was successfully set to complete. If + * successful, the caller is responsibile for seeing this request is ended, as + * blk_mq_complete_request will not work again. + */ +static inline bool blk_mq_mark_complete(struct request *rq) +{ + return cmpxchg(&rq->state, MQ_RQ_IN_FLIGHT, MQ_RQ_COMPLETE) == + MQ_RQ_IN_FLIGHT; +} + /* * Driver command data is immediately after the request. So subtract request * size to get back to the original request, add request size to get the PDU. diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 975fb4cf1bb7..d50c2f0a655a 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -2,6 +2,7 @@ #ifndef _BPF_CGROUP_H #define _BPF_CGROUP_H +#include <linux/errno.h> #include <linux/jump_label.h> #include <uapi/linux/bpf.h> @@ -188,12 +189,38 @@ int __cgroup_bpf_check_dev_permission(short dev_type, u32 major, u32 minor, \ __ret; \ }) +int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, struct bpf_prog *prog); +int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype); +int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr); #else +struct bpf_prog; struct cgroup_bpf {}; static inline void cgroup_bpf_put(struct cgroup *cgrp) {} static inline int cgroup_bpf_inherit(struct cgroup *cgrp) { return 0; } +static inline int cgroup_bpf_prog_attach(const union bpf_attr *attr, + enum bpf_prog_type ptype, + struct bpf_prog *prog) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_detach(const union bpf_attr *attr, + enum bpf_prog_type ptype) +{ + return -EINVAL; +} + +static inline int cgroup_bpf_prog_query(const union bpf_attr *attr, + union bpf_attr __user *uattr) +{ + return -EINVAL; +} + #define cgroup_bpf_enabled (0) #define BPF_CGROUP_PRE_CONNECT_ENABLED(sk) (0) #define BPF_CGROUP_RUN_PROG_INET_INGRESS(sk,skb) ({ 0; }) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 7df32a3200f7..8827e797ff97 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -696,6 +696,8 @@ static inline void bpf_map_offload_map_free(struct bpf_map *map) struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key); struct sock *__sock_hash_lookup_elem(struct bpf_map *map, void *key); int sock_map_prog(struct bpf_map *map, struct bpf_prog *prog, u32 type); +int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog); #else static inline struct sock *__sock_map_lookup_elem(struct bpf_map *map, u32 key) { @@ -714,6 +716,12 @@ static inline int sock_map_prog(struct bpf_map *map, { return -EOPNOTSUPP; } + +static inline int sockmap_get_from_fd(const union bpf_attr *attr, int type, + struct bpf_prog *prog) +{ + return -EINVAL; +} #endif #if defined(CONFIG_XDP_SOCKETS) diff --git a/include/linux/bpf_lirc.h b/include/linux/bpf_lirc.h index 5f8a4283092d..9d9ff755ec29 100644 --- a/include/linux/bpf_lirc.h +++ b/include/linux/bpf_lirc.h @@ -5,11 +5,12 @@ #include <uapi/linux/bpf.h> #ifdef CONFIG_BPF_LIRC_MODE2 -int lirc_prog_attach(const union bpf_attr *attr); +int lirc_prog_attach(const union bpf_attr *attr, struct bpf_prog *prog); int lirc_prog_detach(const union bpf_attr *attr); int lirc_prog_query(const union bpf_attr *attr, union bpf_attr __user *uattr); #else -static inline int lirc_prog_attach(const union bpf_attr *attr) +static inline int lirc_prog_attach(const union bpf_attr *attr, + struct bpf_prog *prog) { return -EINVAL; } diff --git a/include/linux/bpfilter.h b/include/linux/bpfilter.h index 687b1760bb9f..f02cee0225d4 100644 --- a/include/linux/bpfilter.h +++ b/include/linux/bpfilter.h @@ -5,10 +5,10 @@ #include <uapi/linux/bpfilter.h> struct sock; -int bpfilter_ip_set_sockopt(struct sock *sk, int optname, char *optval, +int bpfilter_ip_set_sockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen); -int bpfilter_ip_get_sockopt(struct sock *sk, int optname, char *optval, - int *optlen); +int bpfilter_ip_get_sockopt(struct sock *sk, int optname, char __user *optval, + int __user *optlen); extern int (*bpfilter_process_sockopt)(struct sock *sk, int optname, char __user *optval, unsigned int optlen, bool is_set); diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index fd282c7d3e5e..573f5a7d42d4 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -66,25 +66,40 @@ #endif /* + * Feature detection for gnu_inline (gnu89 extern inline semantics). Either + * __GNUC_STDC_INLINE__ is defined (not using gnu89 extern inline semantics, + * and we opt in to the gnu89 semantics), or __GNUC_STDC_INLINE__ is not + * defined so the gnu89 semantics are the default. + */ +#ifdef __GNUC_STDC_INLINE__ +# define __gnu_inline __attribute__((gnu_inline)) +#else +# define __gnu_inline +#endif + +/* * Force always-inline if the user requests it so via the .config, * or if gcc is too old. * GCC does not warn about unused static inline functions for * -Wunused-function. This turns out to avoid the need for complex #ifdef * directives. Suppress the warning in clang as well by using "unused" * function attribute, which is redundant but not harmful for gcc. + * Prefer gnu_inline, so that extern inline functions do not emit an + * externally visible function. This makes extern inline behave as per gnu89 + * semantics rather than c99. This prevents multiple symbol definition errors + * of extern inline functions at link time. + * A lot of inline functions can cause havoc with function tracing. */ #if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4) -#define inline inline __attribute__((always_inline,unused)) notrace -#define __inline__ __inline__ __attribute__((always_inline,unused)) notrace -#define __inline __inline __attribute__((always_inline,unused)) notrace +#define inline \ + inline __attribute__((always_inline, unused)) notrace __gnu_inline #else -/* A lot of inline functions can cause havoc with function tracing */ -#define inline inline __attribute__((unused)) notrace -#define __inline__ __inline__ __attribute__((unused)) notrace -#define __inline __inline __attribute__((unused)) notrace +#define inline inline __attribute__((unused)) notrace __gnu_inline #endif +#define __inline__ inline +#define __inline inline #define __always_inline inline __attribute__((always_inline)) #define noinline __attribute__((noinline)) diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h index e6c0448ebcc7..31c865d1842e 100644 --- a/include/linux/delayacct.h +++ b/include/linux/delayacct.h @@ -124,7 +124,7 @@ static inline void delayacct_blkio_start(void) static inline void delayacct_blkio_end(struct task_struct *p) { - if (current->delays) + if (p->delays) __delayacct_blkio_end(p); delayacct_clear_flag(DELAYACCT_PF_BLKIO); } diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index 7094718b653b..ffcc7724ca21 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -11,6 +11,7 @@ #include <linux/fcntl.h> #include <linux/wait.h> +#include <linux/err.h> /* * CAREFUL: Check include/uapi/asm-generic/fcntl.h when defining diff --git a/include/linux/filter.h b/include/linux/filter.h index 20f2659dd829..c73dd7396886 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -470,9 +470,7 @@ struct sock_fprog_kern { }; struct bpf_binary_header { - u16 pages; - u16 locked:1; - + u32 pages; /* Some arches need word alignment for their instructions */ u8 image[] __aligned(4); }; @@ -481,7 +479,7 @@ struct bpf_prog { u16 pages; /* Number of allocated pages */ u16 jited:1, /* Is our filter JIT'ed? */ jit_requested:1,/* archs need to JIT the prog */ - locked:1, /* Program image locked? */ + undo_set_mem:1, /* Passed set_memory_ro() checkpoint */ gpl_compatible:1, /* Is filter GPL compatible? */ cb_access:1, /* Is control block accessed? */ dst_needed:1, /* Do we need dst entry? */ @@ -677,46 +675,24 @@ bpf_ctx_narrow_access_ok(u32 off, u32 size, u32 size_default) static inline void bpf_prog_lock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - fp->locked = 1; - if (set_memory_ro((unsigned long)fp, fp->pages)) - fp->locked = 0; -#endif + fp->undo_set_mem = 1; + set_memory_ro((unsigned long)fp, fp->pages); } static inline void bpf_prog_unlock_ro(struct bpf_prog *fp) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (fp->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)fp, fp->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - fp->locked = 0; - } -#endif + if (fp->undo_set_mem) + set_memory_rw((unsigned long)fp, fp->pages); } static inline void bpf_jit_binary_lock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - hdr->locked = 1; - if (set_memory_ro((unsigned long)hdr, hdr->pages)) - hdr->locked = 0; -#endif + set_memory_ro((unsigned long)hdr, hdr->pages); } static inline void bpf_jit_binary_unlock_ro(struct bpf_binary_header *hdr) { -#ifdef CONFIG_ARCH_HAS_SET_MEMORY - if (hdr->locked) { - WARN_ON_ONCE(set_memory_rw((unsigned long)hdr, hdr->pages)); - /* In case set_memory_rw() fails, we want to be the first - * to crash here instead of some random place later on. - */ - hdr->locked = 0; - } -#endif + set_memory_rw((unsigned long)hdr, hdr->pages); } static inline struct bpf_binary_header * @@ -728,22 +704,6 @@ bpf_jit_binary_hdr(const struct bpf_prog *fp) return (void *)addr; } -#ifdef CONFIG_ARCH_HAS_SET_MEMORY -static inline int bpf_prog_check_pages_ro_single(const struct bpf_prog *fp) -{ - if (!fp->locked) - return -ENOLCK; - if (fp->jited) { - const struct bpf_binary_header *hdr = bpf_jit_binary_hdr(fp); - - if (!hdr->locked) - return -ENOLCK; - } - - return 0; -} -#endif - int sk_filter_trim_cap(struct sock *sk, struct sk_buff *skb, unsigned int cap); static inline int sk_filter(struct sock *sk, struct sk_buff *skb) { @@ -805,8 +765,8 @@ static inline bool bpf_dump_raw_ok(void) struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, const struct bpf_insn *patch, u32 len); -static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, - struct net_device *fwd) +static inline int xdp_ok_fwd_dev(const struct net_device *fwd, + unsigned int pktlen) { unsigned int len; @@ -814,7 +774,7 @@ static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, return -ENETDOWN; len = fwd->mtu + fwd->hard_header_len + VLAN_HLEN; - if (skb->len > len) + if (pktlen > len) return -EMSGSIZE; return 0; diff --git a/include/linux/fs.h b/include/linux/fs.h index d78d146a98da..805bf22898cf 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2420,6 +2420,7 @@ extern struct file *filp_open(const char *, int, umode_t); extern struct file *file_open_root(struct dentry *, struct vfsmount *, const char *, int, umode_t); extern struct file * dentry_open(const struct path *, int, const struct cred *); +extern struct file *filp_clone_open(struct file *); extern int filp_close(struct file *, fl_owner_t id); extern struct filename *getname_flags(const char __user *, int, int *); diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h index 3efa3b861d44..941b11811f85 100644 --- a/include/linux/fsl/guts.h +++ b/include/linux/fsl/guts.h @@ -16,6 +16,7 @@ #define __FSL_GUTS_H__ #include <linux/types.h> +#include <linux/io.h> /** * Global Utility Registers. diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 8154f4920fcb..ebb77674be90 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -223,7 +223,6 @@ extern enum ftrace_tracing_type_t ftrace_tracing_type; */ int register_ftrace_function(struct ftrace_ops *ops); int unregister_ftrace_function(struct ftrace_ops *ops); -void clear_ftrace_function(void); extern void ftrace_stub(unsigned long a0, unsigned long a1, struct ftrace_ops *op, struct pt_regs *regs); @@ -239,7 +238,6 @@ static inline int ftrace_nr_registered_ops(void) { return 0; } -static inline void clear_ftrace_function(void) { } static inline void ftrace_kill(void) { } static inline void ftrace_free_init_mem(void) { } static inline void ftrace_free_mem(struct module *mod, void *start, void *end) { } diff --git a/include/linux/hid.h b/include/linux/hid.h index 41a3d5775394..773bcb1d4044 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -511,6 +511,7 @@ struct hid_output_fifo { #define HID_STAT_ADDED BIT(0) #define HID_STAT_PARSED BIT(1) #define HID_STAT_DUP_DETECTED BIT(2) +#define HID_STAT_REPROBED BIT(3) struct hid_input { struct list_head list; @@ -579,7 +580,7 @@ struct hid_device { /* device report descriptor */ bool battery_avoid_query; #endif - unsigned int status; /* see STAT flags above */ + unsigned long status; /* see STAT flags above */ unsigned claimed; /* Claimed by hidinput, hiddev? */ unsigned quirks; /* Various quirks the device can pull on us */ bool io_started; /* If IO has started */ diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index 7843b98e1c6e..c20c7e197d07 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -105,13 +105,13 @@ static inline bool br_vlan_enabled(const struct net_device *dev) static inline int br_vlan_get_pvid(const struct net_device *dev, u16 *p_pvid) { - return -1; + return -EINVAL; } static inline int br_vlan_get_info(const struct net_device *dev, u16 vid, struct bridge_vlan_info *p_vinfo) { - return -1; + return -EINVAL; } #endif diff --git a/include/linux/igmp.h b/include/linux/igmp.h index f8231854b5d6..119f53941c12 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -109,6 +109,8 @@ struct ip_mc_list { extern int ip_check_mc_rcu(struct in_device *dev, __be32 mc_addr, __be32 src_addr, u8 proto); extern int igmp_rcv(struct sk_buff *); extern int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr); +extern int ip_mc_join_group_ssm(struct sock *sk, struct ip_mreqn *imr, + unsigned int mode); extern int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr); extern void ip_mc_drop_socket(struct sock *sk); extern int ip_mc_source(int add, int omode, struct sock *sk, diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 1df940196ab2..ef169d67df92 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -121,6 +121,7 @@ #define ecap_srs(e) ((e >> 31) & 0x1) #define ecap_ers(e) ((e >> 30) & 0x1) #define ecap_prs(e) ((e >> 29) & 0x1) +#define ecap_broken_pasid(e) ((e >> 28) & 0x1) #define ecap_dis(e) ((e >> 27) & 0x1) #define ecap_nest(e) ((e >> 26) & 0x1) #define ecap_mts(e) ((e >> 25) & 0x1) diff --git a/include/linux/kthread.h b/include/linux/kthread.h index 2803264c512f..c1961761311d 100644 --- a/include/linux/kthread.h +++ b/include/linux/kthread.h @@ -62,7 +62,6 @@ void *kthread_probe_data(struct task_struct *k); int kthread_park(struct task_struct *k); void kthread_unpark(struct task_struct *k); void kthread_parkme(void); -void kthread_park_complete(struct task_struct *k); int kthreadd(void *unused); extern struct task_struct *kthreadd_task; diff --git a/include/linux/libata.h b/include/linux/libata.h index 8b8946dd63b9..32f247cb5e9e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -210,6 +210,7 @@ enum { ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ /* (doesn't imply presence) */ ATA_FLAG_SATA = (1 << 1), + ATA_FLAG_NO_LPM = (1 << 2), /* host not happy with LPM */ ATA_FLAG_NO_LOG_PAGE = (1 << 5), /* do not issue log page read */ ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ @@ -1495,6 +1496,29 @@ static inline bool ata_tag_valid(unsigned int tag) return tag < ATA_MAX_QUEUE || ata_tag_internal(tag); } +#define __ata_qc_for_each(ap, qc, tag, max_tag, fn) \ + for ((tag) = 0; (tag) < (max_tag) && \ + ({ qc = fn((ap), (tag)); 1; }); (tag)++) \ + +/* + * Internal use only, iterate commands ignoring error handling and + * status of 'qc'. + */ +#define ata_qc_for_each_raw(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, __ata_qc_from_tag) + +/* + * Iterate all potential commands that can be queued + */ +#define ata_qc_for_each(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, ata_qc_from_tag) + +/* + * Like ata_qc_for_each, but with the internal tag included + */ +#define ata_qc_for_each_with_internal(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE + 1, ata_qc_from_tag) + /* * device helpers */ diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index 4f5f8c21e283..1eb6f244588d 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -27,6 +27,8 @@ */ #define MARVELL_PHY_ID_88E6390 0x01410f90 +#define MARVELL_PHY_FAMILY_ID(id) ((id) >> 4) + /* struct phy_device dev_flags definitions */ #define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001 #define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002 diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 80cbb7fdce4a..83957920653a 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -358,6 +358,7 @@ struct mlx5_frag_buf_ctrl { struct mlx5_frag_buf frag_buf; u32 sz_m1; u32 frag_sz_m1; + u32 strides_offset; u8 log_sz; u8 log_stride; u8 log_frag_strides; @@ -983,14 +984,22 @@ static inline u32 mlx5_base_mkey(const u32 key) return key & 0xffffff00u; } -static inline void mlx5_fill_fbc(u8 log_stride, u8 log_sz, - struct mlx5_frag_buf_ctrl *fbc) +static inline void mlx5_fill_fbc_offset(u8 log_stride, u8 log_sz, + u32 strides_offset, + struct mlx5_frag_buf_ctrl *fbc) { fbc->log_stride = log_stride; fbc->log_sz = log_sz; fbc->sz_m1 = (1 << fbc->log_sz) - 1; fbc->log_frag_strides = PAGE_SHIFT - fbc->log_stride; fbc->frag_sz_m1 = (1 << fbc->log_frag_strides) - 1; + fbc->strides_offset = strides_offset; +} + +static inline void mlx5_fill_fbc(u8 log_stride, u8 log_sz, + struct mlx5_frag_buf_ctrl *fbc) +{ + mlx5_fill_fbc_offset(log_stride, log_sz, 0, fbc); } static inline void mlx5_core_init_cq_frag_buf(struct mlx5_frag_buf_ctrl *fbc, @@ -1004,7 +1013,10 @@ static inline void mlx5_core_init_cq_frag_buf(struct mlx5_frag_buf_ctrl *fbc, static inline void *mlx5_frag_buf_get_wqe(struct mlx5_frag_buf_ctrl *fbc, u32 ix) { - unsigned int frag = (ix >> fbc->log_frag_strides); + unsigned int frag; + + ix += fbc->strides_offset; + frag = ix >> fbc->log_frag_strides; return fbc->frag_buf.frags[frag].buf + ((fbc->frag_sz_m1 & ix) << fbc->log_stride); diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h index d3c9db492b30..fab5121ffb8f 100644 --- a/include/linux/mlx5/eswitch.h +++ b/include/linux/mlx5/eswitch.h @@ -8,6 +8,8 @@ #include <linux/mlx5/driver.h> +#define MLX5_ESWITCH_MANAGER(mdev) MLX5_CAP_GEN(mdev, eswitch_manager) + enum { SRIOV_NONE, SRIOV_LEGACY, diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 27134c4fcb76..ac281f5ec9b8 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -922,7 +922,7 @@ struct mlx5_ifc_cmd_hca_cap_bits { u8 vnic_env_queue_counters[0x1]; u8 ets[0x1]; u8 nic_flow_table[0x1]; - u8 eswitch_flow_table[0x1]; + u8 eswitch_manager[0x1]; u8 device_memory[0x1]; u8 mcam_reg[0x1]; u8 pcam_reg[0x1]; diff --git a/include/linux/mm.h b/include/linux/mm.h index a0fbb9ffe380..7ba6d356d18f 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -155,7 +155,9 @@ extern int overcommit_kbytes_handler(struct ctl_table *, int, void __user *, * mmap() functions). */ -extern struct kmem_cache *vm_area_cachep; +struct vm_area_struct *vm_area_alloc(struct mm_struct *); +struct vm_area_struct *vm_area_dup(struct vm_area_struct *); +void vm_area_free(struct vm_area_struct *); #ifndef CONFIG_MMU extern struct rb_root nommu_region_tree; @@ -450,6 +452,20 @@ struct vm_operations_struct { unsigned long addr); }; +static inline void vma_init(struct vm_area_struct *vma, struct mm_struct *mm) +{ + static const struct vm_operations_struct dummy_vm_ops = {}; + + vma->vm_mm = mm; + vma->vm_ops = &dummy_vm_ops; + INIT_LIST_HEAD(&vma->anon_vma_chain); +} + +static inline void vma_set_anonymous(struct vm_area_struct *vma) +{ + vma->vm_ops = NULL; +} + struct mmu_gather; struct inode; @@ -2132,7 +2148,7 @@ extern int __meminit __early_pfn_to_nid(unsigned long pfn, struct mminit_pfnnid_cache *state); #endif -#ifdef CONFIG_HAVE_MEMBLOCK +#if defined(CONFIG_HAVE_MEMBLOCK) && !defined(CONFIG_FLAT_NODE_MEM_MAP) void zero_resv_unavail(void); #else static inline void zero_resv_unavail(void) {} diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 3ec9850c7936..3d0cc0b5cec2 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -2789,11 +2789,31 @@ static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, if (PTR_ERR(pp) != -EINPROGRESS) NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + if (PTR_ERR(pp) != -EINPROGRESS) { + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; + } +} #else static inline void skb_gro_flush_final(struct sk_buff *skb, struct sk_buff **pp, int flush) { NAPI_GRO_CB(skb)->flush |= flush; } +static inline void skb_gro_flush_final_remcsum(struct sk_buff *skb, + struct sk_buff **pp, + int flush, + struct gro_remcsum *grc) +{ + NAPI_GRO_CB(skb)->flush |= flush; + skb_gro_remcsum_cleanup(skb, grc); + skb->remcsum_offload = 0; +} #endif static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, diff --git a/include/linux/pci.h b/include/linux/pci.h index 340029b2fb38..e04ab6265566 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -261,6 +261,9 @@ enum pci_bus_speed { PCI_SPEED_UNKNOWN = 0xff, }; +enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev); +enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev); + struct pci_cap_saved_data { u16 cap_nr; bool cap_extended; @@ -1240,6 +1243,8 @@ int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr, unsigned long pci_address_to_pio(phys_addr_t addr); phys_addr_t pci_pio_to_address(unsigned long pio); int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); +int devm_pci_remap_iospace(struct device *dev, const struct resource *res, + phys_addr_t phys_addr); void pci_unmap_iospace(struct resource *res); void __iomem *devm_pci_remap_cfgspace(struct device *dev, resource_size_t offset, diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index b72ebdff0b77..003d09ab308d 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -165,6 +165,7 @@ void ring_buffer_record_enable(struct ring_buffer *buffer); void ring_buffer_record_off(struct ring_buffer *buffer); void ring_buffer_record_on(struct ring_buffer *buffer); int ring_buffer_record_is_on(struct ring_buffer *buffer); +int ring_buffer_record_is_set_on(struct ring_buffer *buffer); void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); diff --git a/include/linux/sched.h b/include/linux/sched.h index 9256118bd40c..43731fe51c97 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -118,7 +118,7 @@ struct task_group; * the comment with set_special_state(). */ #define is_special_task_state(state) \ - ((state) & (__TASK_STOPPED | __TASK_TRACED | TASK_DEAD)) + ((state) & (__TASK_STOPPED | __TASK_TRACED | TASK_PARKED | TASK_DEAD)) #define __set_current_state(state_value) \ do { \ diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h index 5be31eb7b266..108ede99e533 100644 --- a/include/linux/sched/task.h +++ b/include/linux/sched/task.h @@ -75,7 +75,7 @@ extern long _do_fork(unsigned long, unsigned long, unsigned long, int __user *, extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *); struct task_struct *fork_idle(int); extern pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); -extern long kernel_wait4(pid_t, int *, int, struct rusage *); +extern long kernel_wait4(pid_t, int __user *, int, struct rusage *); extern void free_task(struct task_struct *tsk); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 164cdedf6012..610a201126ee 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -630,6 +630,7 @@ typedef unsigned char *sk_buff_data_t; * @hash: the packet hash * @queue_mapping: Queue mapping for multiqueue devices * @xmit_more: More SKBs are pending for this queue + * @pfmemalloc: skbuff was allocated from PFMEMALLOC reserves * @ndisc_nodetype: router type (from link layer) * @ooo_okay: allow the mapping of a socket to a queue to be changed * @l4_hash: indicate hash is a canonical 4-tuple hash over transport @@ -735,7 +736,7 @@ struct sk_buff { peeked:1, head_frag:1, xmit_more:1, - __unused:1; /* one bit hole */ + pfmemalloc:1; /* fields enclosed in headers_start/headers_end are copied * using a single memcpy() in __copy_skb_header() @@ -754,31 +755,30 @@ struct sk_buff { __u8 __pkt_type_offset[0]; __u8 pkt_type:3; - __u8 pfmemalloc:1; __u8 ignore_df:1; - __u8 nf_trace:1; __u8 ip_summed:2; __u8 ooo_okay:1; + __u8 l4_hash:1; __u8 sw_hash:1; __u8 wifi_acked_valid:1; __u8 wifi_acked:1; - __u8 no_fcs:1; /* Indicates the inner headers are valid in the skbuff. */ __u8 encapsulation:1; __u8 encap_hdr_csum:1; __u8 csum_valid:1; + __u8 csum_complete_sw:1; __u8 csum_level:2; __u8 csum_not_inet:1; - __u8 dst_pending_confirm:1; #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif __u8 ipvs_property:1; + __u8 inner_protocol_type:1; __u8 remcsum_offload:1; #ifdef CONFIG_NET_SWITCHDEV diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index a368a68cb667..5c1a0933768e 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -11,6 +11,7 @@ #ifndef _LINUX_SYSCALLS_H #define _LINUX_SYSCALLS_H +struct __aio_sigset; struct epoll_event; struct iattr; struct inode; diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 6c5f2074e14f..6f8b68cd460f 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -75,7 +75,7 @@ struct uio_device { struct fasync_struct *async_queue; wait_queue_head_t wait; struct uio_info *info; - spinlock_t info_lock; + struct mutex info_lock; struct kobject *map_dir; struct kobject *portio_dir; }; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5fbfe61f41c6..1beb3ead0385 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -5835,10 +5835,11 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, /** * cfg80211_rx_control_port - notification about a received control port frame * @dev: The device the frame matched to - * @buf: control port frame - * @len: length of the frame data - * @addr: The peer from which the frame was received - * @proto: frame protocol, typically PAE or Pre-authentication + * @skb: The skbuf with the control port frame. It is assumed that the skbuf + * is 802.3 formatted (with 802.3 header). The skb can be non-linear. + * This function does not take ownership of the skb, so the caller is + * responsible for any cleanup. The caller must also ensure that + * skb->protocol is set appropriately. * @unencrypted: Whether the frame was received unencrypted * * This function is used to inform userspace about a received control port @@ -5851,8 +5852,7 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, * Return: %true if the frame was passed to userspace */ bool cfg80211_rx_control_port(struct net_device *dev, - const u8 *buf, size_t len, - const u8 *addr, u16 proto, bool unencrypted); + struct sk_buff *skb, bool unencrypted); /** * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 71b9043aa0e7..3d4930528db0 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -281,6 +281,11 @@ static inline void fib6_info_hold(struct fib6_info *f6i) atomic_inc(&f6i->fib6_ref); } +static inline bool fib6_info_hold_safe(struct fib6_info *f6i) +{ + return atomic_inc_not_zero(&f6i->fib6_ref); +} + static inline void fib6_info_release(struct fib6_info *f6i) { if (f6i && atomic_dec_and_test(&f6i->fib6_ref)) diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 59656fc580df..7b9c82de11cc 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -66,6 +66,12 @@ static inline bool rt6_need_strict(const struct in6_addr *daddr) (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK); } +static inline bool rt6_qualify_for_ecmp(const struct fib6_info *f6i) +{ + return (f6i->fib6_flags & (RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC)) == + RTF_GATEWAY; +} + void ip6_route_input(struct sk_buff *skb); struct dst_entry *ip6_route_input_lookup(struct net *net, struct net_device *dev, diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 16475c269749..8f73be494503 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -355,14 +355,7 @@ struct ipv6_txoptions *ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, int newtype, - struct ipv6_opt_hdr __user *newopt, - int newoptlen); -struct ipv6_txoptions * -ipv6_renew_options_kern(struct sock *sk, - struct ipv6_txoptions *opt, - int newtype, - struct ipv6_opt_hdr *newopt, - int newoptlen); + struct ipv6_opt_hdr *newopt); struct ipv6_txoptions *ipv6_fixup_options(struct ipv6_txoptions *opt_space, struct ipv6_txoptions *opt); @@ -830,7 +823,7 @@ static inline __be32 ip6_make_flowlabel(struct net *net, struct sk_buff *skb, * to minimize possbility that any useful information to an * attacker is leaked. Only lower 20 bits are relevant. */ - rol32(hash, 16); + hash = rol32(hash, 16); flowlabel = (__force __be32)hash & IPV6_FLOWLABEL_MASK; @@ -1107,6 +1100,8 @@ void ipv6_sysctl_unregister(void); int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr); +int ipv6_sock_mc_join_ssm(struct sock *sk, int ifindex, + const struct in6_addr *addr, unsigned int mode); int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr); #endif /* _NET_IPV6_H */ diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 47e35cce3b64..a71264d75d7f 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -128,6 +128,7 @@ struct net { #endif #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) struct netns_nf_frag nf_frag; + struct ctl_table_header *nf_frag_frags_hdr; #endif struct sock *nfnl; struct sock *nfnl_stash; diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 08c005ce56e9..dc417ef0a0c5 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -150,6 +150,7 @@ static inline void nft_data_debug(const struct nft_data *data) * @portid: netlink portID of the original message * @seq: netlink sequence number * @family: protocol family + * @level: depth of the chains * @report: notify via unicast netlink message */ struct nft_ctx { @@ -160,6 +161,7 @@ struct nft_ctx { u32 portid; u32 seq; u8 family; + u8 level; bool report; }; @@ -865,7 +867,6 @@ enum nft_chain_flags { * @table: table that this chain belongs to * @handle: chain handle * @use: number of jump references to this chain - * @level: length of longest path to this chain * @flags: bitmask of enum nft_chain_flags * @name: name of the chain */ @@ -878,7 +879,6 @@ struct nft_chain { struct nft_table *table; u64 handle; u32 use; - u16 level; u8 flags:6, genmask:2; char *name; @@ -1124,7 +1124,6 @@ struct nft_flowtable { u32 genmask:2, use:30; u64 handle; - char *dev_name[NFT_FLOWTABLE_DEVICE_MAX]; /* runtime data below here */ struct nf_hook_ops *ops ____cacheline_aligned; struct nf_flowtable data; diff --git a/include/net/netfilter/nf_tables_core.h b/include/net/netfilter/nf_tables_core.h index e0c0c2558ec4..a05134507e7b 100644 --- a/include/net/netfilter/nf_tables_core.h +++ b/include/net/netfilter/nf_tables_core.h @@ -65,4 +65,10 @@ extern const struct nft_expr_ops nft_payload_fast_ops; extern struct static_key_false nft_counters_enabled; extern struct static_key_false nft_trace_enabled; +extern struct nft_set_type nft_set_rhash_type; +extern struct nft_set_type nft_set_hash_type; +extern struct nft_set_type nft_set_hash_fast_type; +extern struct nft_set_type nft_set_rbtree_type; +extern struct nft_set_type nft_set_bitmap_type; + #endif /* _NET_NF_TABLES_CORE_H */ diff --git a/include/net/netfilter/nf_tproxy.h b/include/net/netfilter/nf_tproxy.h index 9754a50ecde9..4cc64c8446eb 100644 --- a/include/net/netfilter/nf_tproxy.h +++ b/include/net/netfilter/nf_tproxy.h @@ -64,7 +64,7 @@ nf_tproxy_handle_time_wait4(struct net *net, struct sk_buff *skb, * belonging to established connections going through that one. */ struct sock * -nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, +nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, const u8 protocol, const __be32 saddr, const __be32 daddr, const __be16 sport, const __be16 dport, @@ -103,7 +103,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff, struct sock *sk); struct sock * -nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, +nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, const u8 protocol, const struct in6_addr *saddr, const struct in6_addr *daddr, const __be16 sport, const __be16 dport, diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h index c978a31b0f84..762ac9931b62 100644 --- a/include/net/netns/ipv6.h +++ b/include/net/netns/ipv6.h @@ -109,7 +109,6 @@ struct netns_ipv6 { #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) struct netns_nf_frag { - struct netns_sysctl_ipv6 sysctl; struct netns_frags frags; }; #endif diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h index a3c1a2c47cd4..20b059574e60 100644 --- a/include/net/pkt_cls.h +++ b/include/net/pkt_cls.h @@ -111,6 +111,11 @@ void tcf_block_put_ext(struct tcf_block *block, struct Qdisc *q, { } +static inline bool tcf_block_shared(struct tcf_block *block) +{ + return false; +} + static inline struct Qdisc *tcf_block_q(struct tcf_block *block) { return NULL; diff --git a/include/net/tc_act/tc_csum.h b/include/net/tc_act/tc_csum.h index 9470fd7e4350..32d2454c0479 100644 --- a/include/net/tc_act/tc_csum.h +++ b/include/net/tc_act/tc_csum.h @@ -7,7 +7,6 @@ #include <linux/tc_act/tc_csum.h> struct tcf_csum_params { - int action; u32 update_flags; struct rcu_head rcu; }; diff --git a/include/net/tc_act/tc_tunnel_key.h b/include/net/tc_act/tc_tunnel_key.h index efef0b4b1b2b..46b8c7f1c8d5 100644 --- a/include/net/tc_act/tc_tunnel_key.h +++ b/include/net/tc_act/tc_tunnel_key.h @@ -18,7 +18,6 @@ struct tcf_tunnel_key_params { struct rcu_head rcu; int tcft_action; - int action; struct metadata_dst *tcft_enc_metadata; }; diff --git a/include/net/tcp.h b/include/net/tcp.h index 800582b5dd54..cd3ecda9386a 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -342,6 +342,7 @@ ssize_t tcp_splice_read(struct socket *sk, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); +void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks); static inline void tcp_dec_quickack_mode(struct sock *sk, const unsigned int pkts) { @@ -539,6 +540,7 @@ void tcp_send_fin(struct sock *sk); void tcp_send_active_reset(struct sock *sk, gfp_t priority); int tcp_send_synack(struct sock *); void tcp_push_one(struct sock *, unsigned int mss_now); +void __tcp_send_ack(struct sock *sk, u32 rcv_nxt); void tcp_send_ack(struct sock *sk); void tcp_send_delayed_ack(struct sock *sk); void tcp_send_loss_probe(struct sock *sk); @@ -828,6 +830,10 @@ struct tcp_skb_cb { #define TCP_SKB_CB(__skb) ((struct tcp_skb_cb *)&((__skb)->cb[0])) +static inline void bpf_compute_data_end_sk_skb(struct sk_buff *skb) +{ + TCP_SKB_CB(skb)->bpf.data_end = skb->data + skb_headlen(skb); +} #if IS_ENABLED(CONFIG_IPV6) /* This is the variant of inet6_iif() that must be used by TCP, @@ -835,6 +841,11 @@ struct tcp_skb_cb { */ static inline int tcp_v6_iif(const struct sk_buff *skb) { + return TCP_SKB_CB(skb)->header.h6.iif; +} + +static inline int tcp_v6_iif_l3_slave(const struct sk_buff *skb) +{ bool l3_slave = ipv6_l3mdev_skb(TCP_SKB_CB(skb)->header.h6.flags); return l3_slave ? skb->skb_iif : TCP_SKB_CB(skb)->header.h6.iif; @@ -908,8 +919,6 @@ enum tcp_ca_event { CA_EVENT_LOSS, /* loss timeout */ CA_EVENT_ECN_NO_CE, /* ECT set, but not CE marked */ CA_EVENT_ECN_IS_CE, /* received CE marked IP packet */ - CA_EVENT_DELAYED_ACK, /* Delayed ack is sent */ - CA_EVENT_NON_DELAYED_ACK, }; /* Information about inbound ACK, passed to cong_ops->in_ack_event() */ diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h index 9fe472f2ac95..7161856bcf9c 100644 --- a/include/net/xdp_sock.h +++ b/include/net/xdp_sock.h @@ -60,6 +60,10 @@ struct xdp_sock { bool zc; /* Protects multiple processes in the control path */ struct mutex mutex; + /* Mutual exclusion of NAPI TX thread and sendmsg error paths + * in the SKB destructor callback. + */ + spinlock_t tx_completion_lock; u64 rx_dropped; }; diff --git a/include/uapi/drm/amdgpu_drm.h b/include/uapi/drm/amdgpu_drm.h index 784b0fe470ee..1ceec56de015 100644 --- a/include/uapi/drm/amdgpu_drm.h +++ b/include/uapi/drm/amdgpu_drm.h @@ -516,6 +516,7 @@ struct drm_amdgpu_gem_va { #define AMDGPU_CHUNK_ID_DEPENDENCIES 0x03 #define AMDGPU_CHUNK_ID_SYNCOBJ_IN 0x04 #define AMDGPU_CHUNK_ID_SYNCOBJ_OUT 0x05 +#define AMDGPU_CHUNK_ID_BO_HANDLES 0x06 struct drm_amdgpu_cs_chunk { __u32 chunk_id; diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index d5e52350a3aa..721ab7e54d96 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -183,6 +183,7 @@ extern "C" { #define DRM_FORMAT_MOD_VENDOR_QCOM 0x05 #define DRM_FORMAT_MOD_VENDOR_VIVANTE 0x06 #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07 +#define DRM_FORMAT_MOD_VENDOR_ARM 0x08 /* add more to the end as needed */ #define DRM_FORMAT_RESERVED ((1ULL << 56) - 1) @@ -298,6 +299,19 @@ extern "C" { */ #define DRM_FORMAT_MOD_SAMSUNG_64_32_TILE fourcc_mod_code(SAMSUNG, 1) +/* + * Qualcomm Compressed Format + * + * Refers to a compressed variant of the base format that is compressed. + * Implementation may be platform and base-format specific. + * + * Each macrotile consists of m x n (mostly 4 x 4) tiles. + * Pixel data pitch/stride is aligned with macrotile width. + * Pixel data height is aligned with macrotile height. + * Entire pixel data buffer is aligned with 4k(bytes). + */ +#define DRM_FORMAT_MOD_QCOM_COMPRESSED fourcc_mod_code(QCOM, 1) + /* Vivante framebuffer modifiers */ /* @@ -485,6 +499,88 @@ extern "C" { */ #define DRM_FORMAT_MOD_BROADCOM_UIF fourcc_mod_code(BROADCOM, 6) +/* + * Arm Framebuffer Compression (AFBC) modifiers + * + * AFBC is a proprietary lossless image compression protocol and format. + * It provides fine-grained random access and minimizes the amount of data + * transferred between IP blocks. + * + * AFBC has several features which may be supported and/or used, which are + * represented using bits in the modifier. Not all combinations are valid, + * and different devices or use-cases may support different combinations. + */ +#define DRM_FORMAT_MOD_ARM_AFBC(__afbc_mode) fourcc_mod_code(ARM, __afbc_mode) + +/* + * AFBC superblock size + * + * Indicates the superblock size(s) used for the AFBC buffer. The buffer + * size (in pixels) must be aligned to a multiple of the superblock size. + * Four lowest significant bits(LSBs) are reserved for block size. + */ +#define AFBC_FORMAT_MOD_BLOCK_SIZE_MASK 0xf +#define AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 (1ULL) +#define AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 (2ULL) + +/* + * AFBC lossless colorspace transform + * + * Indicates that the buffer makes use of the AFBC lossless colorspace + * transform. + */ +#define AFBC_FORMAT_MOD_YTR (1ULL << 4) + +/* + * AFBC block-split + * + * Indicates that the payload of each superblock is split. The second + * half of the payload is positioned at a predefined offset from the start + * of the superblock payload. + */ +#define AFBC_FORMAT_MOD_SPLIT (1ULL << 5) + +/* + * AFBC sparse layout + * + * This flag indicates that the payload of each superblock must be stored at a + * predefined position relative to the other superblocks in the same AFBC + * buffer. This order is the same order used by the header buffer. In this mode + * each superblock is given the same amount of space as an uncompressed + * superblock of the particular format would require, rounding up to the next + * multiple of 128 bytes in size. + */ +#define AFBC_FORMAT_MOD_SPARSE (1ULL << 6) + +/* + * AFBC copy-block restrict + * + * Buffers with this flag must obey the copy-block restriction. The restriction + * is such that there are no copy-blocks referring across the border of 8x8 + * blocks. For the subsampled data the 8x8 limitation is also subsampled. + */ +#define AFBC_FORMAT_MOD_CBR (1ULL << 7) + +/* + * AFBC tiled layout + * + * The tiled layout groups superblocks in 8x8 or 4x4 tiles, where all + * superblocks inside a tile are stored together in memory. 8x8 tiles are used + * for pixel formats up to and including 32 bpp while 4x4 tiles are used for + * larger bpp formats. The order between the tiles is scan line. + * When the tiled layout is used, the buffer size (in pixels) must be aligned + * to the tile size. + */ +#define AFBC_FORMAT_MOD_TILED (1ULL << 8) + +/* + * AFBC solid color blocks + * + * Indicates that the buffer makes use of solid-color blocks, whereby bandwidth + * can be reduced if a whole superblock is a single color. + */ +#define AFBC_FORMAT_MOD_SC (1ULL << 9) + #if defined(__cplusplus) } #endif diff --git a/include/uapi/drm/vmwgfx_drm.h b/include/uapi/drm/vmwgfx_drm.h index 0bc784f5e0db..399f58317cff 100644 --- a/include/uapi/drm/vmwgfx_drm.h +++ b/include/uapi/drm/vmwgfx_drm.h @@ -40,6 +40,7 @@ extern "C" { #define DRM_VMW_GET_PARAM 0 #define DRM_VMW_ALLOC_DMABUF 1 +#define DRM_VMW_ALLOC_BO 1 #define DRM_VMW_UNREF_DMABUF 2 #define DRM_VMW_HANDLE_CLOSE 2 #define DRM_VMW_CURSOR_BYPASS 3 @@ -68,6 +69,8 @@ extern "C" { #define DRM_VMW_GB_SURFACE_REF 24 #define DRM_VMW_SYNCCPU 25 #define DRM_VMW_CREATE_EXTENDED_CONTEXT 26 +#define DRM_VMW_GB_SURFACE_CREATE_EXT 27 +#define DRM_VMW_GB_SURFACE_REF_EXT 28 /*************************************************************************/ /** @@ -79,6 +82,9 @@ extern "C" { * * DRM_VMW_PARAM_OVERLAY_IOCTL: * Does the driver support the overlay ioctl. + * + * DRM_VMW_PARAM_SM4_1 + * SM4_1 support is enabled. */ #define DRM_VMW_PARAM_NUM_STREAMS 0 @@ -94,6 +100,8 @@ extern "C" { #define DRM_VMW_PARAM_MAX_MOB_SIZE 10 #define DRM_VMW_PARAM_SCREEN_TARGET 11 #define DRM_VMW_PARAM_DX 12 +#define DRM_VMW_PARAM_HW_CAPS2 13 +#define DRM_VMW_PARAM_SM4_1 14 /** * enum drm_vmw_handle_type - handle type for ref ioctls @@ -356,9 +364,9 @@ struct drm_vmw_fence_rep { /*************************************************************************/ /** - * DRM_VMW_ALLOC_DMABUF + * DRM_VMW_ALLOC_BO * - * Allocate a DMA buffer that is visible also to the host. + * Allocate a buffer object that is visible also to the host. * NOTE: The buffer is * identified by a handle and an offset, which are private to the guest, but * useable in the command stream. The guest kernel may translate these @@ -366,27 +374,28 @@ struct drm_vmw_fence_rep { * be zero at all times, or it may disappear from the interface before it is * fixed. * - * The DMA buffer may stay user-space mapped in the guest at all times, + * The buffer object may stay user-space mapped in the guest at all times, * and is thus suitable for sub-allocation. * - * DMA buffers are mapped using the mmap() syscall on the drm device. + * Buffer objects are mapped using the mmap() syscall on the drm device. */ /** - * struct drm_vmw_alloc_dmabuf_req + * struct drm_vmw_alloc_bo_req * * @size: Required minimum size of the buffer. * - * Input data to the DRM_VMW_ALLOC_DMABUF Ioctl. + * Input data to the DRM_VMW_ALLOC_BO Ioctl. */ -struct drm_vmw_alloc_dmabuf_req { +struct drm_vmw_alloc_bo_req { __u32 size; __u32 pad64; }; +#define drm_vmw_alloc_dmabuf_req drm_vmw_alloc_bo_req /** - * struct drm_vmw_dmabuf_rep + * struct drm_vmw_bo_rep * * @map_handle: Offset to use in the mmap() call used to map the buffer. * @handle: Handle unique to this buffer. Used for unreferencing. @@ -395,50 +404,32 @@ struct drm_vmw_alloc_dmabuf_req { * @cur_gmr_offset: Offset to use in the command stream when this buffer is * referenced. See note above. * - * Output data from the DRM_VMW_ALLOC_DMABUF Ioctl. + * Output data from the DRM_VMW_ALLOC_BO Ioctl. */ -struct drm_vmw_dmabuf_rep { +struct drm_vmw_bo_rep { __u64 map_handle; __u32 handle; __u32 cur_gmr_id; __u32 cur_gmr_offset; __u32 pad64; }; +#define drm_vmw_dmabuf_rep drm_vmw_bo_rep /** - * union drm_vmw_dmabuf_arg + * union drm_vmw_alloc_bo_arg * * @req: Input data as described above. * @rep: Output data as described above. * - * Argument to the DRM_VMW_ALLOC_DMABUF Ioctl. + * Argument to the DRM_VMW_ALLOC_BO Ioctl. */ -union drm_vmw_alloc_dmabuf_arg { - struct drm_vmw_alloc_dmabuf_req req; - struct drm_vmw_dmabuf_rep rep; -}; - -/*************************************************************************/ -/** - * DRM_VMW_UNREF_DMABUF - Free a DMA buffer. - * - */ - -/** - * struct drm_vmw_unref_dmabuf_arg - * - * @handle: Handle indicating what buffer to free. Obtained from the - * DRM_VMW_ALLOC_DMABUF Ioctl. - * - * Argument to the DRM_VMW_UNREF_DMABUF Ioctl. - */ - -struct drm_vmw_unref_dmabuf_arg { - __u32 handle; - __u32 pad64; +union drm_vmw_alloc_bo_arg { + struct drm_vmw_alloc_bo_req req; + struct drm_vmw_bo_rep rep; }; +#define drm_vmw_alloc_dmabuf_arg drm_vmw_alloc_bo_arg /*************************************************************************/ /** @@ -1103,9 +1094,8 @@ union drm_vmw_extended_context_arg { * DRM_VMW_HANDLE_CLOSE - Close a user-space handle and release its * underlying resource. * - * Note that this ioctl is overlaid on the DRM_VMW_UNREF_DMABUF Ioctl. - * The ioctl arguments therefore need to be identical in layout. - * + * Note that this ioctl is overlaid on the deprecated DRM_VMW_UNREF_DMABUF + * Ioctl. */ /** @@ -1119,7 +1109,107 @@ struct drm_vmw_handle_close_arg { __u32 handle; __u32 pad64; }; +#define drm_vmw_unref_dmabuf_arg drm_vmw_handle_close_arg + +/*************************************************************************/ +/** + * DRM_VMW_GB_SURFACE_CREATE_EXT - Create a host guest-backed surface. + * + * Allocates a surface handle and queues a create surface command + * for the host on the first use of the surface. The surface ID can + * be used as the surface ID in commands referencing the surface. + * + * This new command extends DRM_VMW_GB_SURFACE_CREATE by adding version + * parameter and 64 bit svga flag. + */ + +/** + * enum drm_vmw_surface_version + * + * @drm_vmw_surface_gb_v1: Corresponds to current gb surface format with + * svga3d surface flags split into 2, upper half and lower half. + */ +enum drm_vmw_surface_version { + drm_vmw_gb_surface_v1 +}; + +/** + * struct drm_vmw_gb_surface_create_ext_req + * + * @base: Surface create parameters. + * @version: Version of surface create ioctl. + * @svga3d_flags_upper_32_bits: Upper 32 bits of svga3d flags. + * @multisample_pattern: Multisampling pattern when msaa is supported. + * @quality_level: Precision settings for each sample. + * @must_be_zero: Reserved for future usage. + * + * Input argument to the DRM_VMW_GB_SURFACE_CREATE_EXT Ioctl. + * Part of output argument for the DRM_VMW_GB_SURFACE_REF_EXT Ioctl. + */ +struct drm_vmw_gb_surface_create_ext_req { + struct drm_vmw_gb_surface_create_req base; + enum drm_vmw_surface_version version; + uint32_t svga3d_flags_upper_32_bits; + SVGA3dMSPattern multisample_pattern; + SVGA3dMSQualityLevel quality_level; + uint64_t must_be_zero; +}; + +/** + * union drm_vmw_gb_surface_create_ext_arg + * + * @req: Input argument as described above. + * @rep: Output argument as described above. + * + * Argument to the DRM_VMW_GB_SURFACE_CREATE_EXT ioctl. + */ +union drm_vmw_gb_surface_create_ext_arg { + struct drm_vmw_gb_surface_create_rep rep; + struct drm_vmw_gb_surface_create_ext_req req; +}; + +/*************************************************************************/ +/** + * DRM_VMW_GB_SURFACE_REF_EXT - Reference a host surface. + * + * Puts a reference on a host surface with a given handle, as previously + * returned by the DRM_VMW_GB_SURFACE_CREATE_EXT ioctl. + * A reference will make sure the surface isn't destroyed while we hold + * it and will allow the calling client to use the surface handle in + * the command stream. + * + * On successful return, the Ioctl returns the surface information given + * to and returned from the DRM_VMW_GB_SURFACE_CREATE_EXT ioctl. + */ +/** + * struct drm_vmw_gb_surface_ref_ext_rep + * + * @creq: The data used as input when the surface was created, as described + * above at "struct drm_vmw_gb_surface_create_ext_req" + * @crep: Additional data output when the surface was created, as described + * above at "struct drm_vmw_gb_surface_create_rep" + * + * Output Argument to the DRM_VMW_GB_SURFACE_REF_EXT ioctl. + */ +struct drm_vmw_gb_surface_ref_ext_rep { + struct drm_vmw_gb_surface_create_ext_req creq; + struct drm_vmw_gb_surface_create_rep crep; +}; + +/** + * union drm_vmw_gb_surface_reference_ext_arg + * + * @req: Input data as described above at "struct drm_vmw_surface_arg" + * @rep: Output data as described above at + * "struct drm_vmw_gb_surface_ref_ext_rep" + * + * Argument to the DRM_VMW_GB_SURFACE_REF Ioctl. + */ +union drm_vmw_gb_surface_reference_ext_arg { + struct drm_vmw_gb_surface_ref_ext_rep rep; + struct drm_vmw_surface_arg req; +}; #if defined(__cplusplus) } diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index 3c5038b587ba..d4593a6062ef 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -29,7 +29,6 @@ #include <linux/types.h> #include <linux/fs.h> -#include <linux/signal.h> #include <asm/byteorder.h> typedef __kernel_ulong_t aio_context_t; @@ -110,10 +109,5 @@ struct iocb { #undef IFBIG #undef IFLITTLE -struct __aio_sigset { - const sigset_t __user *sigmask; - size_t sigsetsize; -}; - #endif /* __LINUX__AIO_ABI_H */ diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 59b19b6a40d7..b7db3261c62d 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -1857,7 +1857,8 @@ union bpf_attr { * is resolved), the nexthop address is returned in ipv4_dst * or ipv6_dst based on family, smac is set to mac address of * egress device, dmac is set to nexthop mac address, rt_metric - * is set to metric from route (IPv4/IPv6 only). + * is set to metric from route (IPv4/IPv6 only), and ifindex + * is set to the device index of the nexthop from the FIB lookup. * * *plen* argument is the size of the passed in struct. * *flags* argument can be a combination of one or more of the @@ -1873,9 +1874,10 @@ union bpf_attr { * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. * Return - * Egress device index on success, 0 if packet needs to continue - * up the stack for further processing or a negative error in case - * of failure. + * * < 0 if any input argument is invalid + * * 0 on success (packet is forwarded, nexthop neighbor exists) + * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the + * * packet is not forwarded or needs assist from full stack * * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) * Description @@ -2612,6 +2614,18 @@ struct bpf_raw_tracepoint_args { #define BPF_FIB_LOOKUP_DIRECT BIT(0) #define BPF_FIB_LOOKUP_OUTPUT BIT(1) +enum { + BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ + BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ + BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ + BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ + BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ + BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ + BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ + BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ + BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ +}; + struct bpf_fib_lookup { /* input: network family for lookup (AF_INET, AF_INET6) * output: network family of egress nexthop @@ -2625,7 +2639,11 @@ struct bpf_fib_lookup { /* total length of packet from network header - used for MTU check */ __u16 tot_len; - __u32 ifindex; /* L3 device index for lookup */ + + /* input: L3 device index for lookup + * output: device index from FIB lookup + */ + __u32 ifindex; union { /* inputs to lookup */ diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index 0b5ddbe135a4..972265f32871 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -76,7 +76,7 @@ struct btf_type { */ #define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) #define BTF_INT_OFFSET(VAL) (((VAL & 0x00ff0000)) >> 16) -#define BTF_INT_BITS(VAL) ((VAL) & 0x0000ffff) +#define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) /* Attributes stored in the BTF_INT_ENCODING */ #define BTF_INT_SIGNED (1 << 0) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 4ca65b56084f..7363f18e65a5 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -226,7 +226,7 @@ enum tunable_id { ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ /* - * Add your fresh new tubale attribute above and remember to update + * Add your fresh new tunable attribute above and remember to update * tunable_strings[] in net/core/ethtool.c */ __ETHTOOL_TUNABLE_COUNT, diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index b4f5073dbac2..01674b56e14f 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -76,6 +76,12 @@ struct kfd_ioctl_update_queue_args { __u32 queue_priority; /* to KFD */ }; +struct kfd_ioctl_set_cu_mask_args { + __u32 queue_id; /* to KFD */ + __u32 num_cu_mask; /* to KFD */ + __u64 cu_mask_ptr; /* to KFD */ +}; + /* For kfd_ioctl_set_memory_policy_args.default_policy and alternate_policy */ #define KFD_IOC_CACHE_POLICY_COHERENT 0 #define KFD_IOC_CACHE_POLICY_NONCOHERENT 1 @@ -189,6 +195,15 @@ struct kfd_ioctl_dbg_wave_control_args { #define KFD_SIGNAL_EVENT_LIMIT 4096 +/* For kfd_event_data.hw_exception_data.reset_type. */ +#define KFD_HW_EXCEPTION_WHOLE_GPU_RESET 0 +#define KFD_HW_EXCEPTION_PER_ENGINE_RESET 1 + +/* For kfd_event_data.hw_exception_data.reset_cause. */ +#define KFD_HW_EXCEPTION_GPU_HANG 0 +#define KFD_HW_EXCEPTION_ECC 1 + + struct kfd_ioctl_create_event_args { __u64 event_page_offset; /* from KFD */ __u32 event_trigger_data; /* from KFD - signal events only */ @@ -219,7 +234,7 @@ struct kfd_memory_exception_failure { __u32 NotPresent; /* Page not present or supervisor privilege */ __u32 ReadOnly; /* Write access to a read-only page */ __u32 NoExecute; /* Execute access to a page marked NX */ - __u32 pad; + __u32 imprecise; /* Can't determine the exact fault address */ }; /* memory exception data*/ @@ -230,10 +245,19 @@ struct kfd_hsa_memory_exception_data { __u32 pad; }; -/* Event data*/ +/* hw exception data */ +struct kfd_hsa_hw_exception_data { + uint32_t reset_type; + uint32_t reset_cause; + uint32_t memory_lost; + uint32_t gpu_id; +}; + +/* Event data */ struct kfd_event_data { union { struct kfd_hsa_memory_exception_data memory_exception_data; + struct kfd_hsa_hw_exception_data hw_exception_data; }; /* From KFD */ __u64 kfd_event_data_ext; /* pointer to an extension structure for future exception types */ @@ -448,7 +472,10 @@ struct kfd_ioctl_unmap_memory_from_gpu_args { #define AMDKFD_IOC_UNMAP_MEMORY_FROM_GPU \ AMDKFD_IOWR(0x19, struct kfd_ioctl_unmap_memory_from_gpu_args) +#define AMDKFD_IOC_SET_CU_MASK \ + AMDKFD_IOW(0x1A, struct kfd_ioctl_set_cu_mask_args) + #define AMDKFD_COMMAND_START 0x01 -#define AMDKFD_COMMAND_END 0x1A +#define AMDKFD_COMMAND_END 0x1B #endif diff --git a/include/uapi/linux/rseq.h b/include/uapi/linux/rseq.h index d620fa43756c..9a402fdb60e9 100644 --- a/include/uapi/linux/rseq.h +++ b/include/uapi/linux/rseq.h @@ -10,13 +10,8 @@ * Copyright (c) 2015-2018 Mathieu Desnoyers <mathieu.desnoyers@efficios.com> */ -#ifdef __KERNEL__ -# include <linux/types.h> -#else -# include <stdint.h> -#endif - -#include <linux/types_32_64.h> +#include <linux/types.h> +#include <asm/byteorder.h> enum rseq_cpu_id_state { RSEQ_CPU_ID_UNINITIALIZED = -1, @@ -52,10 +47,10 @@ struct rseq_cs { __u32 version; /* enum rseq_cs_flags */ __u32 flags; - LINUX_FIELD_u32_u64(start_ip); + __u64 start_ip; /* Offset from start_ip. */ - LINUX_FIELD_u32_u64(post_commit_offset); - LINUX_FIELD_u32_u64(abort_ip); + __u64 post_commit_offset; + __u64 abort_ip; } __attribute__((aligned(4 * sizeof(__u64)))); /* @@ -67,28 +62,30 @@ struct rseq_cs { struct rseq { /* * Restartable sequences cpu_id_start field. Updated by the - * kernel, and read by user-space with single-copy atomicity - * semantics. Aligned on 32-bit. Always contains a value in the - * range of possible CPUs, although the value may not be the - * actual current CPU (e.g. if rseq is not initialized). This - * CPU number value should always be compared against the value - * of the cpu_id field before performing a rseq commit or - * returning a value read from a data structure indexed using - * the cpu_id_start value. + * kernel. Read by user-space with single-copy atomicity + * semantics. This field should only be read by the thread which + * registered this data structure. Aligned on 32-bit. Always + * contains a value in the range of possible CPUs, although the + * value may not be the actual current CPU (e.g. if rseq is not + * initialized). This CPU number value should always be compared + * against the value of the cpu_id field before performing a rseq + * commit or returning a value read from a data structure indexed + * using the cpu_id_start value. */ __u32 cpu_id_start; /* - * Restartable sequences cpu_id field. Updated by the kernel, - * and read by user-space with single-copy atomicity semantics. - * Aligned on 32-bit. Values RSEQ_CPU_ID_UNINITIALIZED and - * RSEQ_CPU_ID_REGISTRATION_FAILED have a special semantic: the - * former means "rseq uninitialized", and latter means "rseq - * initialization failed". This value is meant to be read within - * rseq critical sections and compared with the cpu_id_start - * value previously read, before performing the commit instruction, - * or read and compared with the cpu_id_start value before returning - * a value loaded from a data structure indexed using the - * cpu_id_start value. + * Restartable sequences cpu_id field. Updated by the kernel. + * Read by user-space with single-copy atomicity semantics. This + * field should only be read by the thread which registered this + * data structure. Aligned on 32-bit. Values + * RSEQ_CPU_ID_UNINITIALIZED and RSEQ_CPU_ID_REGISTRATION_FAILED + * have a special semantic: the former means "rseq uninitialized", + * and latter means "rseq initialization failed". This value is + * meant to be read within rseq critical sections and compared + * with the cpu_id_start value previously read, before performing + * the commit instruction, or read and compared with the + * cpu_id_start value before returning a value loaded from a data + * structure indexed using the cpu_id_start value. */ __u32 cpu_id; /* @@ -105,27 +102,44 @@ struct rseq { * targeted by the rseq_cs. Also needs to be set to NULL by user-space * before reclaiming memory that contains the targeted struct rseq_cs. * - * Read and set by the kernel with single-copy atomicity semantics. - * Set by user-space with single-copy atomicity semantics. Aligned - * on 64-bit. + * Read and set by the kernel. Set by user-space with single-copy + * atomicity semantics. This field should only be updated by the + * thread which registered this data structure. Aligned on 64-bit. */ - LINUX_FIELD_u32_u64(rseq_cs); + union { + __u64 ptr64; +#ifdef __LP64__ + __u64 ptr; +#else + struct { +#if (defined(__BYTE_ORDER) && (__BYTE_ORDER == __BIG_ENDIAN)) || defined(__BIG_ENDIAN) + __u32 padding; /* Initialized to zero. */ + __u32 ptr32; +#else /* LITTLE */ + __u32 ptr32; + __u32 padding; /* Initialized to zero. */ +#endif /* ENDIAN */ + } ptr; +#endif + } rseq_cs; + /* - * - RSEQ_DISABLE flag: + * Restartable sequences flags field. + * + * This field should only be updated by the thread which + * registered this data structure. Read by the kernel. + * Mainly used for single-stepping through rseq critical sections + * with debuggers. * - * Fallback fast-track flag for single-stepping. - * Set by user-space if lack of progress is detected. - * Cleared by user-space after rseq finish. - * Read by the kernel. * - RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT - * Inhibit instruction sequence block restart and event - * counter increment on preemption for this thread. + * Inhibit instruction sequence block restart on preemption + * for this thread. * - RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL - * Inhibit instruction sequence block restart and event - * counter increment on signal delivery for this thread. + * Inhibit instruction sequence block restart on signal + * delivery for this thread. * - RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE - * Inhibit instruction sequence block restart and event - * counter increment on migration for this thread. + * Inhibit instruction sequence block restart on migration for + * this thread. */ __u32 flags; } __attribute__((aligned(4 * sizeof(__u64)))); diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 29eb659aa77a..e3f6ed8a7064 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -127,6 +127,10 @@ enum { #define TCP_CM_INQ TCP_INQ +#define TCP_REPAIR_ON 1 +#define TCP_REPAIR_OFF 0 +#define TCP_REPAIR_OFF_NO_WP -1 /* Turn off without window probes */ + struct tcp_repair_opt { __u32 opt_code; __u32 opt_val; diff --git a/include/uapi/linux/types_32_64.h b/include/uapi/linux/types_32_64.h deleted file mode 100644 index 0a87ace34a57..000000000000 --- a/include/uapi/linux/types_32_64.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -#ifndef _UAPI_LINUX_TYPES_32_64_H -#define _UAPI_LINUX_TYPES_32_64_H - -/* - * linux/types_32_64.h - * - * Integer type declaration for pointers across 32-bit and 64-bit systems. - * - * Copyright (c) 2015-2018 Mathieu Desnoyers <mathieu.desnoyers@efficios.com> - */ - -#ifdef __KERNEL__ -# include <linux/types.h> -#else -# include <stdint.h> -#endif - -#include <asm/byteorder.h> - -#ifdef __BYTE_ORDER -# if (__BYTE_ORDER == __BIG_ENDIAN) -# define LINUX_BYTE_ORDER_BIG_ENDIAN -# else -# define LINUX_BYTE_ORDER_LITTLE_ENDIAN -# endif -#else -# ifdef __BIG_ENDIAN -# define LINUX_BYTE_ORDER_BIG_ENDIAN -# else -# define LINUX_BYTE_ORDER_LITTLE_ENDIAN -# endif -#endif - -#ifdef __LP64__ -# define LINUX_FIELD_u32_u64(field) __u64 field -# define LINUX_FIELD_u32_u64_INIT_ONSTACK(field, v) field = (intptr_t)v -#else -# ifdef LINUX_BYTE_ORDER_BIG_ENDIAN -# define LINUX_FIELD_u32_u64(field) __u32 field ## _padding, field -# define LINUX_FIELD_u32_u64_INIT_ONSTACK(field, v) \ - field ## _padding = 0, field = (intptr_t)v -# else -# define LINUX_FIELD_u32_u64(field) __u32 field, field ## _padding -# define LINUX_FIELD_u32_u64_INIT_ONSTACK(field, v) \ - field = (intptr_t)v, field ## _padding = 0 -# endif -#endif - -#endif /* _UAPI_LINUX_TYPES_32_64_H */ diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h index 19aa65a35546..49a53ef8da96 100644 --- a/include/video/mipi_display.h +++ b/include/video/mipi_display.h @@ -38,6 +38,9 @@ enum { MIPI_DSI_DCS_READ = 0x06, + MIPI_DSI_DCS_COMPRESSION_MODE = 0x07, + MIPI_DSI_PPS_LONG_WRITE = 0x0A, + MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE = 0x37, MIPI_DSI_END_OF_TRANSMISSION = 0x08, |
