summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/ieee80211.h10
-rw-r--r--include/linux/nl80211.h49
-rw-r--r--include/net/cfg80211.h50
-rw-r--r--include/net/mac80211.h13
-rw-r--r--include/net/wireless.h16
5 files changed, 115 insertions, 23 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index aad99195a4cc..56b0eb25d927 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -97,7 +97,10 @@
#define IEEE80211_MAX_FRAME_LEN 2352
#define IEEE80211_MAX_SSID_LEN 32
+
#define IEEE80211_MAX_MESH_ID_LEN 32
+#define IEEE80211_MESH_CONFIG_LEN 19
+
#define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
@@ -666,6 +669,13 @@ struct ieee80211_cts {
u8 ra[6];
} __attribute__ ((packed));
+struct ieee80211_pspoll {
+ __le16 frame_control;
+ __le16 aid;
+ u8 bssid[6];
+ u8 ta[6];
+} __attribute__ ((packed));
+
/**
* struct ieee80211_bar - HT Block Ack Request
*
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e4cc7869b22f..79827345351d 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -25,8 +25,9 @@
*
* @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
* to get a list of all present wiphys.
- * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and
- * %NL80211_ATTR_WIPHY_NAME.
+ * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
+ * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME
+ * and/or %NL80211_ATTR_WIPHY_TXQ_PARAMS.
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and
* %NL80211_ATTR_WIPHY_NAME.
@@ -178,6 +179,7 @@ enum nl80211_commands {
* @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
* /sys/class/ieee80211/<phyname>/index
* @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
+ * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
*
* @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
* @NL80211_ATTR_IFNAME: network interface name
@@ -243,6 +245,9 @@ enum nl80211_commands {
* (u8, 0 or 1)
* @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
* (u8, 0 or 1)
+ * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
+ * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
+ * restriction (at most %NL80211_MAX_SUPP_RATES).
*
* @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
* association request when used with NL80211_CMD_NEW_STATION)
@@ -307,6 +312,10 @@ enum nl80211_attrs {
NL80211_ATTR_MESH_PARAMS,
+ NL80211_ATTR_BSS_BASIC_RATES,
+
+ NL80211_ATTR_WIPHY_TXQ_PARAMS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -318,6 +327,8 @@ enum nl80211_attrs {
* here
*/
#define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
+#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
+#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
#define NL80211_MAX_SUPP_RATES 32
#define NL80211_MAX_SUPP_REG_RULES 32
@@ -692,4 +703,38 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
};
+/**
+ * enum nl80211_txq_attr - TX queue parameter attributes
+ * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
+ * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
+ * disabled
+ * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
+ * 2^n-1 in the range 1..32767]
+ * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
+ * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
+ * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
+ */
+enum nl80211_txq_attr {
+ __NL80211_TXQ_ATTR_INVALID,
+ NL80211_TXQ_ATTR_QUEUE,
+ NL80211_TXQ_ATTR_TXOP,
+ NL80211_TXQ_ATTR_CWMIN,
+ NL80211_TXQ_ATTR_CWMAX,
+ NL80211_TXQ_ATTR_AIFS,
+
+ /* keep last */
+ __NL80211_TXQ_ATTR_AFTER_LAST,
+ NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
+};
+
+enum nl80211_txq_q {
+ NL80211_TXQ_Q_VO,
+ NL80211_TXQ_Q_VI,
+ NL80211_TXQ_Q_BE,
+ NL80211_TXQ_Q_BK
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 03e1e88c6a09..1d57835d73f2 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -280,11 +280,16 @@ struct mpath_info {
* (0 = no, 1 = yes, -1 = do not change)
* @use_short_slot_time: Whether the use of short slot time is allowed
* (0 = no, 1 = yes, -1 = do not change)
+ * @basic_rates: basic rates in IEEE 802.11 format
+ * (or NULL for no change)
+ * @basic_rates_len: number of basic rates
*/
struct bss_parameters {
int use_cts_prot;
int use_short_preamble;
int use_short_slot_time;
+ u8 *basic_rates;
+ u8 basic_rates_len;
};
/**
@@ -331,19 +336,19 @@ struct ieee80211_regdomain {
struct ieee80211_reg_rule reg_rules[];
};
-#define MHZ_TO_KHZ(freq) (freq * 1000)
-#define KHZ_TO_MHZ(freq) (freq / 1000)
-#define DBI_TO_MBI(gain) (gain * 100)
-#define MBI_TO_DBI(gain) (gain / 100)
-#define DBM_TO_MBM(gain) (gain * 100)
-#define MBM_TO_DBM(gain) (gain / 100)
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \
- .freq_range.start_freq_khz = (start) * 1000, \
- .freq_range.end_freq_khz = (end) * 1000, \
- .freq_range.max_bandwidth_khz = (bw) * 1000, \
- .power_rule.max_antenna_gain = (gain) * 100, \
- .power_rule.max_eirp = (eirp) * 100, \
+ .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \
+ .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \
+ .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \
+ .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \
+ .power_rule.max_eirp = DBM_TO_MBM(eirp), \
.flags = reg_flags, \
}
@@ -366,6 +371,24 @@ struct mesh_config {
u16 dot11MeshHWMPnetDiameterTraversalTime;
};
+/**
+ * struct ieee80211_txq_params - TX queue parameters
+ * @queue: TX queue identifier (NL80211_TXQ_Q_*)
+ * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
+ * @cwmin: Minimum contention window [a value of the form 2^n-1 in the range
+ * 1..32767]
+ * @cwmax: Maximum contention window [a value of the form 2^n-1 in the range
+ * 1..32767]
+ * @aifs: Arbitration interframe space [0..255]
+ */
+struct ieee80211_txq_params {
+ enum nl80211_txq_q queue;
+ u16 txop;
+ u16 cwmin;
+ u16 cwmax;
+ u8 aifs;
+};
+
/* from net/wireless.h */
struct wiphy;
@@ -425,6 +448,8 @@ struct wiphy;
* @set_mesh_cfg: set mesh parameters (by now, just mesh id)
*
* @change_bss: Modify parameters for a given BSS.
+ *
+ * @set_txq_params: Set TX queue parameters
*/
struct cfg80211_ops {
int (*add_virtual_intf)(struct wiphy *wiphy, char *name,
@@ -485,6 +510,9 @@ struct cfg80211_ops {
const struct mesh_config *nconf, u32 mask);
int (*change_bss)(struct wiphy *wiphy, struct net_device *dev,
struct bss_parameters *params);
+
+ int (*set_txq_params)(struct wiphy *wiphy,
+ struct ieee80211_txq_params *params);
};
#endif /* __NET_CFG80211_H */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0b983bed3829..53856003aa18 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -616,14 +616,12 @@ struct ieee80211_if_init_conf {
* enum ieee80211_if_conf_change - interface config change flags
*
* @IEEE80211_IFCC_BSSID: The BSSID changed.
- * @IEEE80211_IFCC_SSID: The SSID changed.
* @IEEE80211_IFCC_BEACON: The beacon for this interface changed
* (currently AP and MESH only), use ieee80211_beacon_get().
*/
enum ieee80211_if_conf_change {
IEEE80211_IFCC_BSSID = BIT(0),
- IEEE80211_IFCC_SSID = BIT(1),
- IEEE80211_IFCC_BEACON = BIT(2),
+ IEEE80211_IFCC_BEACON = BIT(1),
};
/**
@@ -631,11 +629,6 @@ enum ieee80211_if_conf_change {
*
* @changed: parameters that have changed, see &enum ieee80211_if_conf_change.
* @bssid: BSSID of the network we are associated to/creating.
- * @ssid: used (together with @ssid_len) by drivers for hardware that
- * generate beacons independently. The pointer is valid only during the
- * config_interface() call, so copy the value somewhere if you need
- * it.
- * @ssid_len: length of the @ssid field.
*
* This structure is passed to the config_interface() callback of
* &struct ieee80211_hw.
@@ -643,8 +636,6 @@ enum ieee80211_if_conf_change {
struct ieee80211_if_conf {
u32 changed;
u8 *bssid;
- u8 *ssid;
- size_t ssid_len;
};
/**
@@ -1136,12 +1127,14 @@ enum ieee80211_filter_flags {
* @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
* @IEEE80211_AMPDU_TX_START: start Tx aggregation
* @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation
+ * @IEEE80211_AMPDU_TX_RESUME: resume TX aggregation
*/
enum ieee80211_ampdu_mlme_action {
IEEE80211_AMPDU_RX_START,
IEEE80211_AMPDU_RX_STOP,
IEEE80211_AMPDU_TX_START,
IEEE80211_AMPDU_TX_STOP,
+ IEEE80211_AMPDU_TX_RESUME,
};
/**
diff --git a/include/net/wireless.h b/include/net/wireless.h
index 41294c5f6f8f..17d4b582cf34 100644
--- a/include/net/wireless.h
+++ b/include/net/wireless.h
@@ -341,6 +341,22 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq)
}
/**
+ * ieee80211_get_response_rate - get basic rate for a given rate
+ *
+ * @sband: the band to look for rates in
+ * @basic_rates: bitmap of basic rates
+ * @bitrate: the bitrate for which to find the basic rate
+ *
+ * This function returns the basic rate corresponding to a given
+ * bitrate, that is the next lower bitrate contained in the basic
+ * rate map, which is, for this function, given as a bitmap of
+ * indices of rates in the band's bitrate table.
+ */
+struct ieee80211_rate *
+ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
+ u64 basic_rates, int bitrate);
+
+/**
* regulatory_hint - driver hint to the wireless core a regulatory domain
* @wiphy: the wireless device giving the hint (used only for reporting
* conflicts)
OpenPOWER on IntegriCloud