summaryrefslogtreecommitdiffstats
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/clk-provider.h9
-rw-r--r--include/linux/clk.h90
-rw-r--r--include/linux/clk/renesas.h8
-rw-r--r--include/linux/clk/ti.h7
4 files changed, 107 insertions, 7 deletions
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 08b1aa70a38d..60c51871b04b 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -119,6 +119,11 @@ struct clk_duty {
* Called with enable_lock held. This function must not
* sleep.
*
+ * @save_context: Save the context of the clock in prepration for poweroff.
+ *
+ * @restore_context: Restore the context of the clock after a restoration
+ * of power.
+ *
* @recalc_rate Recalculate the rate of this clock, by querying hardware. The
* parent rate is an input parameter. It is up to the caller to
* ensure that the prepare_mutex is held across this call.
@@ -223,6 +228,8 @@ struct clk_ops {
void (*disable)(struct clk_hw *hw);
int (*is_enabled)(struct clk_hw *hw);
void (*disable_unused)(struct clk_hw *hw);
+ int (*save_context)(struct clk_hw *hw);
+ void (*restore_context)(struct clk_hw *hw);
unsigned long (*recalc_rate)(struct clk_hw *hw,
unsigned long parent_rate);
long (*round_rate)(struct clk_hw *hw, unsigned long rate,
@@ -1011,5 +1018,7 @@ static inline void clk_writel(u32 val, u32 __iomem *reg)
#endif /* platform dependent I/O accessors */
+void clk_gate_restore_context(struct clk_hw *hw);
+
#endif /* CONFIG_COMMON_CLK */
#endif /* CLK_PROVIDER_H */
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 4f750c481b82..a7773b5c0b9f 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -312,7 +312,26 @@ struct clk *clk_get(struct device *dev, const char *id);
*/
int __must_check clk_bulk_get(struct device *dev, int num_clks,
struct clk_bulk_data *clks);
-
+/**
+ * clk_bulk_get_all - lookup and obtain all available references to clock
+ * producer.
+ * @dev: device for clock "consumer"
+ * @clks: pointer to the clk_bulk_data table of consumer
+ *
+ * This helper function allows drivers to get all clk consumers in one
+ * operation. If any of the clk cannot be acquired then any clks
+ * that were obtained will be freed before returning to the caller.
+ *
+ * Returns a positive value for the number of clocks obtained while the
+ * clock references are stored in the clk_bulk_data table in @clks field.
+ * Returns 0 if there're none and a negative value if something failed.
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * clk_bulk_get should not be called from within interrupt context.
+ */
+int __must_check clk_bulk_get_all(struct device *dev,
+ struct clk_bulk_data **clks);
/**
* devm_clk_bulk_get - managed get multiple clk consumers
* @dev: device for clock "consumer"
@@ -327,6 +346,22 @@ int __must_check clk_bulk_get(struct device *dev, int num_clks,
*/
int __must_check devm_clk_bulk_get(struct device *dev, int num_clks,
struct clk_bulk_data *clks);
+/**
+ * devm_clk_bulk_get_all - managed get multiple clk consumers
+ * @dev: device for clock "consumer"
+ * @clks: pointer to the clk_bulk_data table of consumer
+ *
+ * Returns a positive value for the number of clocks obtained while the
+ * clock references are stored in the clk_bulk_data table in @clks field.
+ * Returns 0 if there're none and a negative value if something failed.
+ *
+ * This helper function allows drivers to get several clk
+ * consumers in one operation with management, the clks will
+ * automatically be freed when the device is unbound.
+ */
+
+int __must_check devm_clk_bulk_get_all(struct device *dev,
+ struct clk_bulk_data **clks);
/**
* devm_clk_get - lookup and obtain a managed reference to a clock producer.
@@ -488,6 +523,19 @@ void clk_put(struct clk *clk);
void clk_bulk_put(int num_clks, struct clk_bulk_data *clks);
/**
+ * clk_bulk_put_all - "free" all the clock source
+ * @num_clks: the number of clk_bulk_data
+ * @clks: the clk_bulk_data table of consumer
+ *
+ * Note: drivers must ensure that all clk_bulk_enable calls made on this
+ * clock source are balanced by clk_bulk_disable calls prior to calling
+ * this function.
+ *
+ * clk_bulk_put_all should not be called from within interrupt context.
+ */
+void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks);
+
+/**
* devm_clk_put - "free" a managed clock source
* @dev: device used to acquire the clock
* @clk: clock source acquired with devm_clk_get()
@@ -629,6 +677,23 @@ struct clk *clk_get_parent(struct clk *clk);
*/
struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+/**
+ * clk_save_context - save clock context for poweroff
+ *
+ * Saves the context of the clock register for powerstates in which the
+ * contents of the registers will be lost. Occurs deep within the suspend
+ * code so locking is not necessary.
+ */
+int clk_save_context(void);
+
+/**
+ * clk_restore_context - restore clock context after poweroff
+ *
+ * This occurs with all clocks enabled. Occurs deep within the resume code
+ * so locking is not necessary.
+ */
+void clk_restore_context(void);
+
#else /* !CONFIG_HAVE_CLK */
static inline struct clk *clk_get(struct device *dev, const char *id)
@@ -642,6 +707,12 @@ static inline int __must_check clk_bulk_get(struct device *dev, int num_clks,
return 0;
}
+static inline int __must_check clk_bulk_get_all(struct device *dev,
+ struct clk_bulk_data **clks)
+{
+ return 0;
+}
+
static inline struct clk *devm_clk_get(struct device *dev, const char *id)
{
return NULL;
@@ -653,6 +724,13 @@ static inline int __must_check devm_clk_bulk_get(struct device *dev, int num_clk
return 0;
}
+static inline int __must_check devm_clk_bulk_get_all(struct device *dev,
+ struct clk_bulk_data **clks)
+{
+
+ return 0;
+}
+
static inline struct clk *devm_get_clk_from_child(struct device *dev,
struct device_node *np, const char *con_id)
{
@@ -663,6 +741,8 @@ static inline void clk_put(struct clk *clk) {}
static inline void clk_bulk_put(int num_clks, struct clk_bulk_data *clks) {}
+static inline void clk_bulk_put_all(int num_clks, struct clk_bulk_data *clks) {}
+
static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
@@ -728,6 +808,14 @@ static inline struct clk *clk_get_sys(const char *dev_id, const char *con_id)
{
return NULL;
}
+
+static inline int clk_save_context(void)
+{
+ return 0;
+}
+
+static inline void clk_restore_context(void) {}
+
#endif
/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h
index 9ebf1f8243bb..0ebbe2f0b45e 100644
--- a/include/linux/clk/renesas.h
+++ b/include/linux/clk/renesas.h
@@ -1,14 +1,10 @@
-/*
+/* SPDX-License-Identifier: GPL-2.0+
+ *
* Copyright 2013 Ideas On Board SPRL
* Copyright 2013, 2014 Horms Solutions Ltd.
*
* Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* Contact: Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef __LINUX_CLK_RENESAS_H_
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index a8faa38b1ed6..eacc5df57b99 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -159,6 +159,7 @@ struct clk_hw_omap {
const char *clkdm_name;
struct clockdomain *clkdm;
const struct clk_hw_omap_ops *ops;
+ u32 context;
};
/*
@@ -290,9 +291,15 @@ struct ti_clk_features {
#define TI_CLK_DPLL4_DENY_REPROGRAM BIT(1)
#define TI_CLK_DISABLE_CLKDM_CONTROL BIT(2)
#define TI_CLK_ERRATA_I810 BIT(3)
+#define TI_CLK_CLKCTRL_COMPAT BIT(4)
void ti_clk_setup_features(struct ti_clk_features *features);
const struct ti_clk_features *ti_clk_get_features(void);
+int omap3_noncore_dpll_save_context(struct clk_hw *hw);
+void omap3_noncore_dpll_restore_context(struct clk_hw *hw);
+
+int omap3_core_dpll_save_context(struct clk_hw *hw);
+void omap3_core_dpll_restore_context(struct clk_hw *hw);
extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
OpenPOWER on IntegriCloud