diff options
Diffstat (limited to 'include/linux')
48 files changed, 1813 insertions, 340 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index ed80f147bd50..4b3283cb09ab 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -101,7 +101,7 @@ static inline bool has_acpi_companion(struct device *dev) static inline void acpi_preset_companion(struct device *dev, struct acpi_device *parent, u64 addr) { - ACPI_COMPANION_SET(dev, acpi_find_child_device(parent, addr, NULL)); + ACPI_COMPANION_SET(dev, acpi_find_child_device(parent, addr, false)); } static inline const char *acpi_dev_name(struct acpi_device *adev) @@ -340,7 +340,14 @@ struct pci_dev; int acpi_pci_irq_enable (struct pci_dev *dev); void acpi_penalize_isa_irq(int irq, int active); bool acpi_isa_irq_available(int irq); +#ifdef CONFIG_PCI void acpi_penalize_sci_irq(int irq, int trigger, int polarity); +#else +static inline void acpi_penalize_sci_irq(int irq, int trigger, + int polarity) +{ +} +#endif void acpi_pci_irq_disable (struct pci_dev *dev); extern int ec_read(u8 addr, u8 *val); @@ -1054,6 +1061,17 @@ static inline int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index) } #endif +#if defined(CONFIG_ACPI) && IS_ENABLED(CONFIG_I2C) +bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, + struct acpi_resource_i2c_serialbus **i2c); +#else +static inline bool i2c_acpi_get_i2c_resource(struct acpi_resource *ares, + struct acpi_resource_i2c_serialbus **i2c) +{ + return false; +} +#endif + /* Device properties */ #ifdef CONFIG_ACPI diff --git a/include/linux/adxl.h b/include/linux/adxl.h index 2d29f55923e3..2a629acb4c3f 100644 --- a/include/linux/adxl.h +++ b/include/linux/adxl.h @@ -7,12 +7,7 @@ #ifndef _LINUX_ADXL_H #define _LINUX_ADXL_H -#ifdef CONFIG_ACPI_ADXL const char * const *adxl_get_component_names(void); int adxl_decode(u64 addr, u64 component_values[]); -#else -static inline const char * const *adxl_get_component_names(void) { return NULL; } -static inline int adxl_decode(u64 addr, u64 component_values[]) { return -EOPNOTSUPP; } -#endif #endif /* _LINUX_ADXL_H */ diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 06396c1cf127..fc5004a4b07d 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -99,13 +99,22 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, * unique, to convince GCC not to merge duplicate inline asm statements. */ #define annotate_reachable() ({ \ - asm volatile("ANNOTATE_REACHABLE counter=%c0" \ - : : "i" (__COUNTER__)); \ + asm volatile("%c0:\n\t" \ + ".pushsection .discard.reachable\n\t" \ + ".long %c0b - .\n\t" \ + ".popsection\n\t" : : "i" (__COUNTER__)); \ }) #define annotate_unreachable() ({ \ - asm volatile("ANNOTATE_UNREACHABLE counter=%c0" \ - : : "i" (__COUNTER__)); \ + asm volatile("%c0:\n\t" \ + ".pushsection .discard.unreachable\n\t" \ + ".long %c0b - .\n\t" \ + ".popsection\n\t" : : "i" (__COUNTER__)); \ }) +#define ASM_UNREACHABLE \ + "999:\n\t" \ + ".pushsection .discard.unreachable\n\t" \ + ".long 999b - .\n\t" \ + ".popsection\n\t" #else #define annotate_reachable() #define annotate_unreachable() @@ -293,45 +302,6 @@ static inline void *offset_to_ptr(const int *off) return (void *)((unsigned long)off + *off); } -#else /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ -#ifndef LINKER_SCRIPT - -#ifdef CONFIG_STACK_VALIDATION -.macro ANNOTATE_UNREACHABLE counter:req -\counter: - .pushsection .discard.unreachable - .long \counter\()b -. - .popsection -.endm - -.macro ANNOTATE_REACHABLE counter:req -\counter: - .pushsection .discard.reachable - .long \counter\()b -. - .popsection -.endm - -.macro ASM_UNREACHABLE -999: - .pushsection .discard.unreachable - .long 999b - . - .popsection -.endm -#else /* CONFIG_STACK_VALIDATION */ -.macro ANNOTATE_UNREACHABLE counter:req -.endm - -.macro ANNOTATE_REACHABLE counter:req -.endm - -.macro ASM_UNREACHABLE -.endm -#endif /* CONFIG_STACK_VALIDATION */ - -#endif /* LINKER_SCRIPT */ -#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ /* Compile time object size, -1 for unknown */ diff --git a/include/linux/compiler_types.h b/include/linux/compiler_types.h index 4a3f9c09c92d..ba814f18cb4c 100644 --- a/include/linux/compiler_types.h +++ b/include/linux/compiler_types.h @@ -104,6 +104,60 @@ struct ftrace_likely_data { unsigned long constant; }; +#ifdef CONFIG_ENABLE_MUST_CHECK +#define __must_check __attribute__((__warn_unused_result__)) +#else +#define __must_check +#endif + +#if defined(CC_USING_HOTPATCH) +#define notrace __attribute__((hotpatch(0, 0))) +#else +#define notrace __attribute__((__no_instrument_function__)) +#endif + +/* + * it doesn't make sense on ARM (currently the only user of __naked) + * to trace naked functions because then mcount is called without + * stack and frame pointer being set up and there is no chance to + * restore the lr register to the value before mcount was called. + */ +#define __naked __attribute__((__naked__)) notrace + +#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) + +/* + * Force always-inline if the user requests it so via the .config. + * GCC does not warn about unused static inline functions for + * -Wunused-function. This turns out to avoid the need for complex #ifdef + * directives. Suppress the warning in clang as well by using "unused" + * function attribute, which is redundant but not harmful for gcc. + * Prefer gnu_inline, so that extern inline functions do not emit an + * externally visible function. This makes extern inline behave as per gnu89 + * semantics rather than c99. This prevents multiple symbol definition errors + * of extern inline functions at link time. + * A lot of inline functions can cause havoc with function tracing. + * Do not use __always_inline here, since currently it expands to inline again + * (which would break users of __always_inline). + */ +#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ + !defined(CONFIG_OPTIMIZE_INLINING) +#define inline inline __attribute__((__always_inline__)) __gnu_inline \ + __maybe_unused notrace +#else +#define inline inline __gnu_inline \ + __maybe_unused notrace +#endif + +#define __inline__ inline +#define __inline inline + +/* + * Rather then using noinline to prevent stack consumption, use + * noinline_for_stack instead. For documentation reasons. + */ +#define noinline_for_stack noinline + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ @@ -161,58 +215,4 @@ struct ftrace_likely_data { #define __diag_error(compiler, version, option, comment) \ __diag_ ## compiler(version, error, option) -#ifdef CONFIG_ENABLE_MUST_CHECK -#define __must_check __attribute__((__warn_unused_result__)) -#else -#define __must_check -#endif - -#if defined(CC_USING_HOTPATCH) -#define notrace __attribute__((hotpatch(0, 0))) -#else -#define notrace __attribute__((__no_instrument_function__)) -#endif - -/* - * it doesn't make sense on ARM (currently the only user of __naked) - * to trace naked functions because then mcount is called without - * stack and frame pointer being set up and there is no chance to - * restore the lr register to the value before mcount was called. - */ -#define __naked __attribute__((__naked__)) notrace - -#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) - -/* - * Force always-inline if the user requests it so via the .config. - * GCC does not warn about unused static inline functions for - * -Wunused-function. This turns out to avoid the need for complex #ifdef - * directives. Suppress the warning in clang as well by using "unused" - * function attribute, which is redundant but not harmful for gcc. - * Prefer gnu_inline, so that extern inline functions do not emit an - * externally visible function. This makes extern inline behave as per gnu89 - * semantics rather than c99. This prevents multiple symbol definition errors - * of extern inline functions at link time. - * A lot of inline functions can cause havoc with function tracing. - * Do not use __always_inline here, since currently it expands to inline again - * (which would break users of __always_inline). - */ -#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ - !defined(CONFIG_OPTIMIZE_INLINING) -#define inline inline __attribute__((__always_inline__)) __gnu_inline \ - __maybe_unused notrace -#else -#define inline inline __gnu_inline \ - __maybe_unused notrace -#endif - -#define __inline__ inline -#define __inline inline - -/* - * Rather then using noinline to prevent stack consumption, use - * noinline_for_stack instead. For documentation reasons. - */ -#define noinline_for_stack noinline - #endif /* __LINUX_COMPILER_TYPES_H */ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index faed7a8977e8..4dff74f48d4b 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -33,6 +33,8 @@ struct cpuidle_state_usage { unsigned long long disable; unsigned long long usage; unsigned long long time; /* in US */ + unsigned long long above; /* Number of times it's been too deep */ + unsigned long long below; /* Number of times it's been too shallow */ #ifdef CONFIG_SUSPEND unsigned long long s2idle_usage; unsigned long long s2idle_time; /* in US */ diff --git a/include/linux/dell-led.h b/include/linux/dell-led.h deleted file mode 100644 index 92521471517f..000000000000 --- a/include/linux/dell-led.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DELL_LED_H__ -#define __DELL_LED_H__ - -int dell_micmute_led_set(int on); - -#endif diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index e4963b0f45da..fbffa74bfc1b 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -131,6 +131,9 @@ struct devfreq_dev_profile { * @scaling_min_freq: Limit minimum frequency requested by OPP interface * @scaling_max_freq: Limit maximum frequency requested by OPP interface * @stop_polling: devfreq polling status of a device. + * @suspend_freq: frequency of a device set during suspend phase. + * @resume_freq: frequency of a device set in resume phase. + * @suspend_count: suspend requests counter for a device. * @total_trans: Number of devfreq transitions * @trans_table: Statistics of devfreq transitions * @time_in_state: Statistics of devfreq states @@ -167,6 +170,10 @@ struct devfreq { unsigned long scaling_max_freq; bool stop_polling; + unsigned long suspend_freq; + unsigned long resume_freq; + atomic_t suspend_count; + /* information for device frequency transition */ unsigned int total_trans; unsigned int *trans_table; @@ -198,6 +205,9 @@ extern void devm_devfreq_remove_device(struct device *dev, extern int devfreq_suspend_device(struct devfreq *devfreq); extern int devfreq_resume_device(struct devfreq *devfreq); +extern void devfreq_suspend(void); +extern void devfreq_resume(void); + /** * update_devfreq() - Reevaluate the device and configure frequency * @devfreq: the devfreq device @@ -324,6 +334,9 @@ static inline int devfreq_resume_device(struct devfreq *devfreq) return 0; } +static inline void devfreq_suspend(void) {} +static inline void devfreq_resume(void) {} + static inline struct dev_pm_opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h index 02dba8cd033d..999e4b104410 100644 --- a/include/linux/dma-fence.h +++ b/include/linux/dma-fence.h @@ -541,6 +541,7 @@ static inline signed long dma_fence_wait(struct dma_fence *fence, bool intr) return ret < 0 ? ret : 0; } +struct dma_fence *dma_fence_get_stub(void); u64 dma_fence_context_alloc(unsigned num); #define DMA_FENCE_TRACE(f, fmt, args...) \ diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index 15bd41447025..d327bdd53716 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -796,7 +796,7 @@ static inline void dmam_release_declared_memory(struct device *dev) static inline void *dma_alloc_wc(struct device *dev, size_t size, dma_addr_t *dma_addr, gfp_t gfp) { - unsigned long attrs = DMA_ATTR_NO_WARN; + unsigned long attrs = DMA_ATTR_WRITE_COMBINE; if (gfp & __GFP_NOWARN) attrs |= DMA_ATTR_NO_WARN; diff --git a/include/linux/edac.h b/include/linux/edac.h index 1d0c9ea8825d..342dabda9c7e 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -669,10 +669,4 @@ struct mem_ctl_info { bool fake_inject_ue; u16 fake_inject_count; }; - -/* - * Maximum number of memory controllers in the coherent fabric. - */ -#define EDAC_MAX_MCS 2 * MAX_NUMNODES - #endif diff --git a/include/linux/filter.h b/include/linux/filter.h index 795ff0b869bb..a8b9d90a8042 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -861,7 +861,7 @@ bpf_run_sk_reuseport(struct sock_reuseport *reuse, struct sock *sk, extern int bpf_jit_enable; extern int bpf_jit_harden; extern int bpf_jit_kallsyms; -extern int bpf_jit_limit; +extern long bpf_jit_limit; typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size); diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index f2f887795d43..8aebcf822082 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -104,6 +104,7 @@ struct gpio_descs *__must_check devm_gpiod_get_array_optional(struct device *dev, const char *con_id, enum gpiod_flags flags); void devm_gpiod_put(struct device *dev, struct gpio_desc *desc); +void devm_gpiod_unhinge(struct device *dev, struct gpio_desc *desc); void devm_gpiod_put_array(struct device *dev, struct gpio_descs *descs); int gpiod_get_direction(struct gpio_desc *desc); @@ -172,6 +173,10 @@ int desc_to_gpio(const struct gpio_desc *desc); struct device_node; struct fwnode_handle; +struct gpio_desc *gpiod_get_from_of_node(struct device_node *node, + const char *propname, int index, + enum gpiod_flags dflags, + const char *label); struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev, struct device_node *node, const char *propname, int index, @@ -245,6 +250,15 @@ static inline void gpiod_put(struct gpio_desc *desc) WARN_ON(1); } +static inline void devm_gpiod_unhinge(struct device *dev, + struct gpio_desc *desc) +{ + might_sleep(); + + /* GPIO can never have been requested */ + WARN_ON(1); +} + static inline void gpiod_put_array(struct gpio_descs *descs) { might_sleep(); @@ -518,6 +532,15 @@ struct device_node; struct fwnode_handle; static inline +struct gpio_desc *gpiod_get_from_of_node(struct device_node *node, + const char *propname, int index, + enum gpiod_flags dflags, + const char *label) +{ + return ERR_PTR(-ENOSYS); +} + +static inline struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev, struct device_node *node, const char *propname, int index, diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h index 4f3febc0f971..d2bacf502429 100644 --- a/include/linux/hdmi.h +++ b/include/linux/hdmi.h @@ -163,6 +163,9 @@ struct hdmi_avi_infoframe { int hdmi_avi_infoframe_init(struct hdmi_avi_infoframe *frame); ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer, size_t size); +ssize_t hdmi_avi_infoframe_pack_only(const struct hdmi_avi_infoframe *frame, + void *buffer, size_t size); +int hdmi_avi_infoframe_check(struct hdmi_avi_infoframe *frame); enum hdmi_spd_sdi { HDMI_SPD_SDI_UNKNOWN, @@ -194,6 +197,9 @@ int hdmi_spd_infoframe_init(struct hdmi_spd_infoframe *frame, const char *vendor, const char *product); ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer, size_t size); +ssize_t hdmi_spd_infoframe_pack_only(const struct hdmi_spd_infoframe *frame, + void *buffer, size_t size); +int hdmi_spd_infoframe_check(struct hdmi_spd_infoframe *frame); enum hdmi_audio_coding_type { HDMI_AUDIO_CODING_TYPE_STREAM, @@ -272,6 +278,9 @@ struct hdmi_audio_infoframe { int hdmi_audio_infoframe_init(struct hdmi_audio_infoframe *frame); ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame, void *buffer, size_t size); +ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame, + void *buffer, size_t size); +int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame); enum hdmi_3d_structure { HDMI_3D_STRUCTURE_INVALID = -1, @@ -299,6 +308,9 @@ struct hdmi_vendor_infoframe { int hdmi_vendor_infoframe_init(struct hdmi_vendor_infoframe *frame); ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame, void *buffer, size_t size); +ssize_t hdmi_vendor_infoframe_pack_only(const struct hdmi_vendor_infoframe *frame, + void *buffer, size_t size); +int hdmi_vendor_infoframe_check(struct hdmi_vendor_infoframe *frame); union hdmi_vendor_any_infoframe { struct { @@ -330,10 +342,14 @@ union hdmi_infoframe { struct hdmi_audio_infoframe audio; }; -ssize_t -hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer, size_t size); -int hdmi_infoframe_unpack(union hdmi_infoframe *frame, void *buffer); +ssize_t hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer, + size_t size); +ssize_t hdmi_infoframe_pack_only(const union hdmi_infoframe *frame, + void *buffer, size_t size); +int hdmi_infoframe_check(union hdmi_infoframe *frame); +int hdmi_infoframe_unpack(union hdmi_infoframe *frame, + const void *buffer, size_t size); void hdmi_infoframe_log(const char *level, struct device *dev, - union hdmi_infoframe *frame); + const union hdmi_infoframe *frame); #endif /* _DRM_HDMI_H */ diff --git a/include/linux/i3c/ccc.h b/include/linux/i3c/ccc.h new file mode 100644 index 000000000000..73b0982cc519 --- /dev/null +++ b/include/linux/i3c/ccc.h @@ -0,0 +1,385 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_CCC_H +#define I3C_CCC_H + +#include <linux/bitops.h> +#include <linux/i3c/device.h> + +/* I3C CCC (Common Command Codes) related definitions */ +#define I3C_CCC_DIRECT BIT(7) + +#define I3C_CCC_ID(id, broadcast) \ + ((id) | ((broadcast) ? 0 : I3C_CCC_DIRECT)) + +/* Commands valid in both broadcast and unicast modes */ +#define I3C_CCC_ENEC(broadcast) I3C_CCC_ID(0x0, broadcast) +#define I3C_CCC_DISEC(broadcast) I3C_CCC_ID(0x1, broadcast) +#define I3C_CCC_ENTAS(as, broadcast) I3C_CCC_ID(0x2 + (as), broadcast) +#define I3C_CCC_RSTDAA(broadcast) I3C_CCC_ID(0x6, broadcast) +#define I3C_CCC_SETMWL(broadcast) I3C_CCC_ID(0x9, broadcast) +#define I3C_CCC_SETMRL(broadcast) I3C_CCC_ID(0xa, broadcast) +#define I3C_CCC_SETXTIME(broadcast) ((broadcast) ? 0x28 : 0x98) +#define I3C_CCC_VENDOR(id, broadcast) ((id) + ((broadcast) ? 0x61 : 0xe0)) + +/* Broadcast-only commands */ +#define I3C_CCC_ENTDAA I3C_CCC_ID(0x7, true) +#define I3C_CCC_DEFSLVS I3C_CCC_ID(0x8, true) +#define I3C_CCC_ENTTM I3C_CCC_ID(0xb, true) +#define I3C_CCC_ENTHDR(x) I3C_CCC_ID(0x20 + (x), true) + +/* Unicast-only commands */ +#define I3C_CCC_SETDASA I3C_CCC_ID(0x7, false) +#define I3C_CCC_SETNEWDA I3C_CCC_ID(0x8, false) +#define I3C_CCC_GETMWL I3C_CCC_ID(0xb, false) +#define I3C_CCC_GETMRL I3C_CCC_ID(0xc, false) +#define I3C_CCC_GETPID I3C_CCC_ID(0xd, false) +#define I3C_CCC_GETBCR I3C_CCC_ID(0xe, false) +#define I3C_CCC_GETDCR I3C_CCC_ID(0xf, false) +#define I3C_CCC_GETSTATUS I3C_CCC_ID(0x10, false) +#define I3C_CCC_GETACCMST I3C_CCC_ID(0x11, false) +#define I3C_CCC_SETBRGTGT I3C_CCC_ID(0x13, false) +#define I3C_CCC_GETMXDS I3C_CCC_ID(0x14, false) +#define I3C_CCC_GETHDRCAP I3C_CCC_ID(0x15, false) +#define I3C_CCC_GETXTIME I3C_CCC_ID(0x19, false) + +#define I3C_CCC_EVENT_SIR BIT(0) +#define I3C_CCC_EVENT_MR BIT(1) +#define I3C_CCC_EVENT_HJ BIT(3) + +/** + * struct i3c_ccc_events - payload passed to ENEC/DISEC CCC + * + * @events: bitmask of I3C_CCC_EVENT_xxx events. + * + * Depending on the CCC command, the specific events coming from all devices + * (broadcast version) or a specific device (unicast version) will be + * enabled (ENEC) or disabled (DISEC). + */ +struct i3c_ccc_events { + u8 events; +}; + +/** + * struct i3c_ccc_mwl - payload passed to SETMWL/GETMWL CCC + * + * @len: maximum write length in bytes + * + * The maximum write length is only applicable to SDR private messages or + * extended Write CCCs (like SETXTIME). + */ +struct i3c_ccc_mwl { + __be16 len; +}; + +/** + * struct i3c_ccc_mrl - payload passed to SETMRL/GETMRL CCC + * + * @len: maximum read length in bytes + * @ibi_len: maximum IBI payload length + * + * The maximum read length is only applicable to SDR private messages or + * extended Read CCCs (like GETXTIME). + * The IBI length is only valid if the I3C slave is IBI capable + * (%I3C_BCR_IBI_REQ_CAP is set). + */ +struct i3c_ccc_mrl { + __be16 read_len; + u8 ibi_len; +} __packed; + +/** + * struct i3c_ccc_dev_desc - I3C/I2C device descriptor used for DEFSLVS + * + * @dyn_addr: dynamic address assigned to the I3C slave or 0 if the entry is + * describing an I2C slave. + * @dcr: DCR value (not applicable to entries describing I2C devices) + * @lvr: LVR value (not applicable to entries describing I3C devices) + * @bcr: BCR value or 0 if this entry is describing an I2C slave + * @static_addr: static address or 0 if the device does not have a static + * address + * + * The DEFSLVS command should be passed an array of i3c_ccc_dev_desc + * descriptors (one entry per I3C/I2C dev controlled by the master). + */ +struct i3c_ccc_dev_desc { + u8 dyn_addr; + union { + u8 dcr; + u8 lvr; + }; + u8 bcr; + u8 static_addr; +}; + +/** + * struct i3c_ccc_defslvs - payload passed to DEFSLVS CCC + * + * @count: number of dev descriptors + * @master: descriptor describing the current master + * @slaves: array of descriptors describing slaves controlled by the + * current master + * + * Information passed to the broadcast DEFSLVS to propagate device + * information to all masters currently acting as slaves on the bus. + * This is only meaningful if you have more than one master. + */ +struct i3c_ccc_defslvs { + u8 count; + struct i3c_ccc_dev_desc master; + struct i3c_ccc_dev_desc slaves[0]; +} __packed; + +/** + * enum i3c_ccc_test_mode - enum listing all available test modes + * + * @I3C_CCC_EXIT_TEST_MODE: exit test mode + * @I3C_CCC_VENDOR_TEST_MODE: enter vendor test mode + */ +enum i3c_ccc_test_mode { + I3C_CCC_EXIT_TEST_MODE, + I3C_CCC_VENDOR_TEST_MODE, +}; + +/** + * struct i3c_ccc_enttm - payload passed to ENTTM CCC + * + * @mode: one of the &enum i3c_ccc_test_mode modes + * + * Information passed to the ENTTM CCC to instruct an I3C device to enter a + * specific test mode. + */ +struct i3c_ccc_enttm { + u8 mode; +}; + +/** + * struct i3c_ccc_setda - payload passed to SETNEWDA and SETDASA CCCs + * + * @addr: dynamic address to assign to an I3C device + * + * Information passed to the SETNEWDA and SETDASA CCCs to assign/change the + * dynamic address of an I3C device. + */ +struct i3c_ccc_setda { + u8 addr; +}; + +/** + * struct i3c_ccc_getpid - payload passed to GETPID CCC + * + * @pid: 48 bits PID in big endian + */ +struct i3c_ccc_getpid { + u8 pid[6]; +}; + +/** + * struct i3c_ccc_getbcr - payload passed to GETBCR CCC + * + * @bcr: BCR (Bus Characteristic Register) value + */ +struct i3c_ccc_getbcr { + u8 bcr; +}; + +/** + * struct i3c_ccc_getdcr - payload passed to GETDCR CCC + * + * @dcr: DCR (Device Characteristic Register) value + */ +struct i3c_ccc_getdcr { + u8 dcr; +}; + +#define I3C_CCC_STATUS_PENDING_INT(status) ((status) & GENMASK(3, 0)) +#define I3C_CCC_STATUS_PROTOCOL_ERROR BIT(5) +#define I3C_CCC_STATUS_ACTIVITY_MODE(status) \ + (((status) & GENMASK(7, 6)) >> 6) + +/** + * struct i3c_ccc_getstatus - payload passed to GETSTATUS CCC + * + * @status: status of the I3C slave (see I3C_CCC_STATUS_xxx macros for more + * information). + */ +struct i3c_ccc_getstatus { + __be16 status; +}; + +/** + * struct i3c_ccc_getaccmst - payload passed to GETACCMST CCC + * + * @newmaster: address of the master taking bus ownership + */ +struct i3c_ccc_getaccmst { + u8 newmaster; +}; + +/** + * struct i3c_ccc_bridged_slave_desc - bridged slave descriptor + * + * @addr: dynamic address of the bridged device + * @id: ID of the slave device behind the bridge + */ +struct i3c_ccc_bridged_slave_desc { + u8 addr; + __be16 id; +} __packed; + +/** + * struct i3c_ccc_setbrgtgt - payload passed to SETBRGTGT CCC + * + * @count: number of bridged slaves + * @bslaves: bridged slave descriptors + */ +struct i3c_ccc_setbrgtgt { + u8 count; + struct i3c_ccc_bridged_slave_desc bslaves[0]; +} __packed; + +/** + * enum i3c_sdr_max_data_rate - max data rate values for private SDR transfers + */ +enum i3c_sdr_max_data_rate { + I3C_SDR0_FSCL_MAX, + I3C_SDR1_FSCL_8MHZ, + I3C_SDR2_FSCL_6MHZ, + I3C_SDR3_FSCL_4MHZ, + I3C_SDR4_FSCL_2MHZ, +}; + +/** + * enum i3c_tsco - clock to data turn-around + */ +enum i3c_tsco { + I3C_TSCO_8NS, + I3C_TSCO_9NS, + I3C_TSCO_10NS, + I3C_TSCO_11NS, + I3C_TSCO_12NS, +}; + +#define I3C_CCC_MAX_SDR_FSCL_MASK GENMASK(2, 0) +#define I3C_CCC_MAX_SDR_FSCL(x) ((x) & I3C_CCC_MAX_SDR_FSCL_MASK) + +/** + * struct i3c_ccc_getmxds - payload passed to GETMXDS CCC + * + * @maxwr: write limitations + * @maxrd: read limitations + * @maxrdturn: maximum read turn-around expressed micro-seconds and + * little-endian formatted + */ +struct i3c_ccc_getmxds { + u8 maxwr; + u8 maxrd; + u8 maxrdturn[3]; +} __packed; + +#define I3C_CCC_HDR_MODE(mode) BIT(mode) + +/** + * struct i3c_ccc_gethdrcap - payload passed to GETHDRCAP CCC + * + * @modes: bitmap of supported HDR modes + */ +struct i3c_ccc_gethdrcap { + u8 modes; +} __packed; + +/** + * enum i3c_ccc_setxtime_subcmd - SETXTIME sub-commands + */ +enum i3c_ccc_setxtime_subcmd { + I3C_CCC_SETXTIME_ST = 0x7f, + I3C_CCC_SETXTIME_DT = 0xbf, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE0 = 0xdf, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE1 = 0xef, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE2 = 0xf7, + I3C_CCC_SETXTIME_ENTER_ASYNC_MODE3 = 0xfb, + I3C_CCC_SETXTIME_ASYNC_TRIGGER = 0xfd, + I3C_CCC_SETXTIME_TPH = 0x3f, + I3C_CCC_SETXTIME_TU = 0x9f, + I3C_CCC_SETXTIME_ODR = 0x8f, +}; + +/** + * struct i3c_ccc_setxtime - payload passed to SETXTIME CCC + * + * @subcmd: one of the sub-commands ddefined in &enum i3c_ccc_setxtime_subcmd + * @data: sub-command payload. Amount of data is determined by + * &i3c_ccc_setxtime->subcmd + */ +struct i3c_ccc_setxtime { + u8 subcmd; + u8 data[0]; +} __packed; + +#define I3C_CCC_GETXTIME_SYNC_MODE BIT(0) +#define I3C_CCC_GETXTIME_ASYNC_MODE(x) BIT((x) + 1) +#define I3C_CCC_GETXTIME_OVERFLOW BIT(7) + +/** + * struct i3c_ccc_getxtime - payload retrieved from GETXTIME CCC + * + * @supported_modes: bitmap describing supported XTIME modes + * @state: current status (enabled mode and overflow status) + * @frequency: slave's internal oscillator frequency in 500KHz steps + * @inaccuracy: slave's internal oscillator inaccuracy in 0.1% steps + */ +struct i3c_ccc_getxtime { + u8 supported_modes; + u8 state; + u8 frequency; + u8 inaccuracy; +} __packed; + +/** + * struct i3c_ccc_cmd_payload - CCC payload + * + * @len: payload length + * @data: payload data. This buffer must be DMA-able + */ +struct i3c_ccc_cmd_payload { + u16 len; + void *data; +}; + +/** + * struct i3c_ccc_cmd_dest - CCC command destination + * + * @addr: can be an I3C device address or the broadcast address if this is a + * broadcast CCC + * @payload: payload to be sent to this device or broadcasted + */ +struct i3c_ccc_cmd_dest { + u8 addr; + struct i3c_ccc_cmd_payload payload; +}; + +/** + * struct i3c_ccc_cmd - CCC command + * + * @rnw: true if the CCC should retrieve data from the device. Only valid for + * unicast commands + * @id: CCC command id + * @ndests: number of destinations. Should always be one for broadcast commands + * @dests: array of destinations and associated payload for this CCC. Most of + * the time, only one destination is provided + * @err: I3C error code + */ +struct i3c_ccc_cmd { + u8 rnw; + u8 id; + unsigned int ndests; + struct i3c_ccc_cmd_dest *dests; + enum i3c_error_code err; +}; + +#endif /* I3C_CCC_H */ diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h new file mode 100644 index 000000000000..5ecb055fd375 --- /dev/null +++ b/include/linux/i3c/device.h @@ -0,0 +1,331 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_DEV_H +#define I3C_DEV_H + +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/kconfig.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> + +/** + * enum i3c_error_code - I3C error codes + * + * These are the standard error codes as defined by the I3C specification. + * When -EIO is returned by the i3c_device_do_priv_xfers() or + * i3c_device_send_hdr_cmds() one can check the error code in + * &struct_i3c_priv_xfer.err or &struct i3c_hdr_cmd.err to get a better idea of + * what went wrong. + * + * @I3C_ERROR_UNKNOWN: unknown error, usually means the error is not I3C + * related + * @I3C_ERROR_M0: M0 error + * @I3C_ERROR_M1: M1 error + * @I3C_ERROR_M2: M2 error + */ +enum i3c_error_code { + I3C_ERROR_UNKNOWN = 0, + I3C_ERROR_M0 = 1, + I3C_ERROR_M1, + I3C_ERROR_M2, +}; + +/** + * enum i3c_hdr_mode - HDR mode ids + * @I3C_HDR_DDR: DDR mode + * @I3C_HDR_TSP: TSP mode + * @I3C_HDR_TSL: TSL mode + */ +enum i3c_hdr_mode { + I3C_HDR_DDR, + I3C_HDR_TSP, + I3C_HDR_TSL, +}; + +/** + * struct i3c_priv_xfer - I3C SDR private transfer + * @rnw: encodes the transfer direction. true for a read, false for a write + * @len: transfer length in bytes of the transfer + * @data: input/output buffer + * @data.in: input buffer. Must point to a DMA-able buffer + * @data.out: output buffer. Must point to a DMA-able buffer + * @err: I3C error code + */ +struct i3c_priv_xfer { + u8 rnw; + u16 len; + union { + void *in; + const void *out; + } data; + enum i3c_error_code err; +}; + +/** + * enum i3c_dcr - I3C DCR values + * @I3C_DCR_GENERIC_DEVICE: generic I3C device + */ +enum i3c_dcr { + I3C_DCR_GENERIC_DEVICE = 0, +}; + +#define I3C_PID_MANUF_ID(pid) (((pid) & GENMASK_ULL(47, 33)) >> 33) +#define I3C_PID_RND_LOWER_32BITS(pid) (!!((pid) & BIT_ULL(32))) +#define I3C_PID_RND_VAL(pid) ((pid) & GENMASK_ULL(31, 0)) +#define I3C_PID_PART_ID(pid) (((pid) & GENMASK_ULL(31, 16)) >> 16) +#define I3C_PID_INSTANCE_ID(pid) (((pid) & GENMASK_ULL(15, 12)) >> 12) +#define I3C_PID_EXTRA_INFO(pid) ((pid) & GENMASK_ULL(11, 0)) + +#define I3C_BCR_DEVICE_ROLE(bcr) ((bcr) & GENMASK(7, 6)) +#define I3C_BCR_I3C_SLAVE (0 << 6) +#define I3C_BCR_I3C_MASTER (1 << 6) +#define I3C_BCR_HDR_CAP BIT(5) +#define I3C_BCR_BRIDGE BIT(4) +#define I3C_BCR_OFFLINE_CAP BIT(3) +#define I3C_BCR_IBI_PAYLOAD BIT(2) +#define I3C_BCR_IBI_REQ_CAP BIT(1) +#define I3C_BCR_MAX_DATA_SPEED_LIM BIT(0) + +/** + * struct i3c_device_info - I3C device information + * @pid: Provisional ID + * @bcr: Bus Characteristic Register + * @dcr: Device Characteristic Register + * @static_addr: static/I2C address + * @dyn_addr: dynamic address + * @hdr_cap: supported HDR modes + * @max_read_ds: max read speed information + * @max_write_ds: max write speed information + * @max_ibi_len: max IBI payload length + * @max_read_turnaround: max read turn-around time in micro-seconds + * @max_read_len: max private SDR read length in bytes + * @max_write_len: max private SDR write length in bytes + * + * These are all basic information that should be advertised by an I3C device. + * Some of them are optional depending on the device type and device + * capabilities. + * For each I3C slave attached to a master with + * i3c_master_add_i3c_dev_locked(), the core will send the relevant CCC command + * to retrieve these data. + */ +struct i3c_device_info { + u64 pid; + u8 bcr; + u8 dcr; + u8 static_addr; + u8 dyn_addr; + u8 hdr_cap; + u8 max_read_ds; + u8 max_write_ds; + u8 max_ibi_len; + u32 max_read_turnaround; + u16 max_read_len; + u16 max_write_len; +}; + +/* + * I3C device internals are kept hidden from I3C device users. It's just + * simpler to refactor things when everything goes through getter/setters, and + * I3C device drivers should not have to worry about internal representation + * anyway. + */ +struct i3c_device; + +/* These macros should be used to i3c_device_id entries. */ +#define I3C_MATCH_MANUF_AND_PART (I3C_MATCH_MANUF | I3C_MATCH_PART) + +#define I3C_DEVICE(_manufid, _partid, _drvdata) \ + { \ + .match_flags = I3C_MATCH_MANUF_AND_PART, \ + .manuf_id = _manufid, \ + .part_id = _partid, \ + .data = _drvdata, \ + } + +#define I3C_DEVICE_EXTRA_INFO(_manufid, _partid, _info, _drvdata) \ + { \ + .match_flags = I3C_MATCH_MANUF_AND_PART | \ + I3C_MATCH_EXTRA_INFO, \ + .manuf_id = _manufid, \ + .part_id = _partid, \ + .extra_info = _info, \ + .data = _drvdata, \ + } + +#define I3C_CLASS(_dcr, _drvdata) \ + { \ + .match_flags = I3C_MATCH_DCR, \ + .dcr = _dcr, \ + } + +/** + * struct i3c_driver - I3C device driver + * @driver: inherit from device_driver + * @probe: I3C device probe method + * @remove: I3C device remove method + * @id_table: I3C device match table. Will be used by the framework to decide + * which device to bind to this driver + */ +struct i3c_driver { + struct device_driver driver; + int (*probe)(struct i3c_device *dev); + int (*remove)(struct i3c_device *dev); + const struct i3c_device_id *id_table; +}; + +static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv) +{ + return container_of(drv, struct i3c_driver, driver); +} + +struct device *i3cdev_to_dev(struct i3c_device *i3cdev); +struct i3c_device *dev_to_i3cdev(struct device *dev); + +static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev, + void *data) +{ + struct device *dev = i3cdev_to_dev(i3cdev); + + dev_set_drvdata(dev, data); +} + +static inline void *i3cdev_get_drvdata(struct i3c_device *i3cdev) +{ + struct device *dev = i3cdev_to_dev(i3cdev); + + return dev_get_drvdata(dev); +} + +int i3c_driver_register_with_owner(struct i3c_driver *drv, + struct module *owner); +void i3c_driver_unregister(struct i3c_driver *drv); + +#define i3c_driver_register(__drv) \ + i3c_driver_register_with_owner(__drv, THIS_MODULE) + +/** + * module_i3c_driver() - Register a module providing an I3C driver + * @__drv: the I3C driver to register + * + * Provide generic init/exit functions that simply register/unregister an I3C + * driver. + * Should be used by any driver that does not require extra init/cleanup steps. + */ +#define module_i3c_driver(__drv) \ + module_driver(__drv, i3c_driver_register, i3c_driver_unregister) + +/** + * i3c_i2c_driver_register() - Register an i2c and an i3c driver + * @i3cdrv: the I3C driver to register + * @i2cdrv: the I2C driver to register + * + * This function registers both @i2cdev and @i3cdev, and fails if one of these + * registrations fails. This is mainly useful for devices that support both I2C + * and I3C modes. + * Note that when CONFIG_I3C is not enabled, this function only registers the + * I2C driver. + * + * Return: 0 if both registrations succeeds, a negative error code otherwise. + */ +static inline int i3c_i2c_driver_register(struct i3c_driver *i3cdrv, + struct i2c_driver *i2cdrv) +{ + int ret; + + ret = i2c_add_driver(i2cdrv); + if (ret || !IS_ENABLED(CONFIG_I3C)) + return ret; + + ret = i3c_driver_register(i3cdrv); + if (ret) + i2c_del_driver(i2cdrv); + + return ret; +} + +/** + * i3c_i2c_driver_unregister() - Unregister an i2c and an i3c driver + * @i3cdrv: the I3C driver to register + * @i2cdrv: the I2C driver to register + * + * This function unregisters both @i3cdrv and @i2cdrv. + * Note that when CONFIG_I3C is not enabled, this function only unregisters the + * @i2cdrv. + */ +static inline void i3c_i2c_driver_unregister(struct i3c_driver *i3cdrv, + struct i2c_driver *i2cdrv) +{ + if (IS_ENABLED(CONFIG_I3C)) + i3c_driver_unregister(i3cdrv); + + i2c_del_driver(i2cdrv); +} + +/** + * module_i3c_i2c_driver() - Register a module providing an I3C and an I2C + * driver + * @__i3cdrv: the I3C driver to register + * @__i2cdrv: the I3C driver to register + * + * Provide generic init/exit functions that simply register/unregister an I3C + * and an I2C driver. + * This macro can be used even if CONFIG_I3C is disabled, in this case, only + * the I2C driver will be registered. + * Should be used by any driver that does not require extra init/cleanup steps. + */ +#define module_i3c_i2c_driver(__i3cdrv, __i2cdrv) \ + module_driver(__i3cdrv, \ + i3c_i2c_driver_register, \ + i3c_i2c_driver_unregister) + +int i3c_device_do_priv_xfers(struct i3c_device *dev, + struct i3c_priv_xfer *xfers, + int nxfers); + +void i3c_device_get_info(struct i3c_device *dev, struct i3c_device_info *info); + +struct i3c_ibi_payload { + unsigned int len; + const void *data; +}; + +/** + * struct i3c_ibi_setup - IBI setup object + * @max_payload_len: maximum length of the payload associated to an IBI. If one + * IBI appears to have a payload that is bigger than this + * number, the IBI will be rejected. + * @num_slots: number of pre-allocated IBI slots. This should be chosen so that + * the system never runs out of IBI slots, otherwise you'll lose + * IBIs. + * @handler: IBI handler, every time an IBI is received. This handler is called + * in a workqueue context. It is allowed to sleep and send new + * messages on the bus, though it's recommended to keep the + * processing done there as fast as possible to avoid delaying + * processing of other queued on the same workqueue. + * + * Temporary structure used to pass information to i3c_device_request_ibi(). + * This object can be allocated on the stack since i3c_device_request_ibi() + * copies every bit of information and do not use it after + * i3c_device_request_ibi() has returned. + */ +struct i3c_ibi_setup { + unsigned int max_payload_len; + unsigned int num_slots; + void (*handler)(struct i3c_device *dev, + const struct i3c_ibi_payload *payload); +}; + +int i3c_device_request_ibi(struct i3c_device *dev, + const struct i3c_ibi_setup *setup); +void i3c_device_free_ibi(struct i3c_device *dev); +int i3c_device_enable_ibi(struct i3c_device *dev); +int i3c_device_disable_ibi(struct i3c_device *dev); + +#endif /* I3C_DEV_H */ diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h new file mode 100644 index 000000000000..f13fd8b1dd79 --- /dev/null +++ b/include/linux/i3c/master.h @@ -0,0 +1,648 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Cadence Design Systems Inc. + * + * Author: Boris Brezillon <boris.brezillon@bootlin.com> + */ + +#ifndef I3C_MASTER_H +#define I3C_MASTER_H + +#include <asm/bitsperlong.h> + +#include <linux/bitops.h> +#include <linux/i2c.h> +#include <linux/i3c/ccc.h> +#include <linux/i3c/device.h> +#include <linux/rwsem.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +#define I3C_HOT_JOIN_ADDR 0x2 +#define I3C_BROADCAST_ADDR 0x7e +#define I3C_MAX_ADDR GENMASK(6, 0) + +struct i3c_master_controller; +struct i3c_bus; +struct i2c_device; +struct i3c_device; + +/** + * struct i3c_i2c_dev_desc - Common part of the I3C/I2C device descriptor + * @node: node element used to insert the slot into the I2C or I3C device + * list + * @master: I3C master that instantiated this device. Will be used to do + * I2C/I3C transfers + * @master_priv: master private data assigned to the device. Can be used to + * add master specific information + * + * This structure is describing common I3C/I2C dev information. + */ +struct i3c_i2c_dev_desc { + struct list_head node; + struct i3c_master_controller *master; + void *master_priv; +}; + +#define I3C_LVR_I2C_INDEX_MASK GENMASK(7, 5) +#define I3C_LVR_I2C_INDEX(x) ((x) << 5) +#define I3C_LVR_I2C_FM_MODE BIT(4) + +#define I2C_MAX_ADDR GENMASK(9, 0) + +/** + * struct i2c_dev_boardinfo - I2C device board information + * @node: used to insert the boardinfo object in the I2C boardinfo list + * @base: regular I2C board information + * @lvr: LVR (Legacy Virtual Register) needed by the I3C core to know about + * the I2C device limitations + * + * This structure is used to attach board-level information to an I2C device. + * Each I2C device connected on the I3C bus should have one. + */ +struct i2c_dev_boardinfo { + struct list_head node; + struct i2c_board_info base; + u8 lvr; +}; + +/** + * struct i2c_dev_desc - I2C device descriptor + * @common: common part of the I2C device descriptor + * @boardinfo: pointer to the boardinfo attached to this I2C device + * @dev: I2C device object registered to the I2C framework + * + * Each I2C device connected on the bus will have an i2c_dev_desc. + * This object is created by the core and later attached to the controller + * using &struct_i3c_master_controller->ops->attach_i2c_dev(). + * + * &struct_i2c_dev_desc is the internal representation of an I2C device + * connected on an I3C bus. This object is also passed to all + * &struct_i3c_master_controller_ops hooks. + */ +struct i2c_dev_desc { + struct i3c_i2c_dev_desc common; + const struct i2c_dev_boardinfo *boardinfo; + struct i2c_client *dev; +}; + +/** + * struct i3c_ibi_slot - I3C IBI (In-Band Interrupt) slot + * @work: work associated to this slot. The IBI handler will be called from + * there + * @dev: the I3C device that has generated this IBI + * @len: length of the payload associated to this IBI + * @data: payload buffer + * + * An IBI slot is an object pre-allocated by the controller and used when an + * IBI comes in. + * Every time an IBI comes in, the I3C master driver should find a free IBI + * slot in its IBI slot pool, retrieve the IBI payload and queue the IBI using + * i3c_master_queue_ibi(). + * + * How IBI slots are allocated is left to the I3C master driver, though, for + * simple kmalloc-based allocation, the generic IBI slot pool can be used. + */ +struct i3c_ibi_slot { + struct work_struct work; + struct i3c_dev_desc *dev; + unsigned int len; + void *data; +}; + +/** + * struct i3c_device_ibi_info - IBI information attached to a specific device + * @all_ibis_handled: used to be informed when no more IBIs are waiting to be + * processed. Used by i3c_device_disable_ibi() to wait for + * all IBIs to be dequeued + * @pending_ibis: count the number of pending IBIs. Each pending IBI has its + * work element queued to the controller workqueue + * @max_payload_len: maximum payload length for an IBI coming from this device. + * this value is specified when calling + * i3c_device_request_ibi() and should not change at run + * time. All messages IBIs exceeding this limit should be + * rejected by the master + * @num_slots: number of IBI slots reserved for this device + * @enabled: reflect the IBI status + * @handler: IBI handler specified at i3c_device_request_ibi() call time. This + * handler will be called from the controller workqueue, and as such + * is allowed to sleep (though it is recommended to process the IBI + * as fast as possible to not stall processing of other IBIs queued + * on the same workqueue). + * New I3C messages can be sent from the IBI handler + * + * The &struct_i3c_device_ibi_info object is allocated when + * i3c_device_request_ibi() is called and attached to a specific device. This + * object is here to manage IBIs coming from a specific I3C device. + * + * Note that this structure is the generic view of the IBI management + * infrastructure. I3C master drivers may have their own internal + * representation which they can associate to the device using + * controller-private data. + */ +struct i3c_device_ibi_info { + struct completion all_ibis_handled; + atomic_t pending_ibis; + unsigned int max_payload_len; + unsigned int num_slots; + unsigned int enabled; + void (*handler)(struct i3c_device *dev, + const struct i3c_ibi_payload *payload); +}; + +/** + * struct i3c_dev_boardinfo - I3C device board information + * @node: used to insert the boardinfo object in the I3C boardinfo list + * @init_dyn_addr: initial dynamic address requested by the FW. We provide no + * guarantee that the device will end up using this address, + * but try our best to assign this specific address to the + * device + * @static_addr: static address the I3C device listen on before it's been + * assigned a dynamic address by the master. Will be used during + * bus initialization to assign it a specific dynamic address + * before starting DAA (Dynamic Address Assignment) + * @pid: I3C Provisional ID exposed by the device. This is a unique identifier + * that may be used to attach boardinfo to i3c_dev_desc when the device + * does not have a static address + * @of_node: optional DT node in case the device has been described in the DT + * + * This structure is used to attach board-level information to an I3C device. + * Not all I3C devices connected on the bus will have a boardinfo. It's only + * needed if you want to attach extra resources to a device or assign it a + * specific dynamic address. + */ +struct i3c_dev_boardinfo { + struct list_head node; + u8 init_dyn_addr; + u8 static_addr; + u64 pid; + struct device_node *of_node; +}; + +/** + * struct i3c_dev_desc - I3C device descriptor + * @common: common part of the I3C device descriptor + * @info: I3C device information. Will be automatically filled when you create + * your device with i3c_master_add_i3c_dev_locked() + * @ibi_lock: lock used to protect the &struct_i3c_device->ibi + * @ibi: IBI info attached to a device. Should be NULL until + * i3c_device_request_ibi() is called + * @dev: pointer to the I3C device object exposed to I3C device drivers. This + * should never be accessed from I3C master controller drivers. Only core + * code should manipulate it in when updating the dev <-> desc link or + * when propagating IBI events to the driver + * @boardinfo: pointer to the boardinfo attached to this I3C device + * + * Internal representation of an I3C device. This object is only used by the + * core and passed to I3C master controller drivers when they're requested to + * do some operations on the device. + * The core maintains the link between the internal I3C dev descriptor and the + * object exposed to the I3C device drivers (&struct_i3c_device). + */ +struct i3c_dev_desc { + struct i3c_i2c_dev_desc common; + struct i3c_device_info info; + struct mutex ibi_lock; + struct i3c_device_ibi_info *ibi; + struct i3c_device *dev; + const struct i3c_dev_boardinfo *boardinfo; +}; + +/** + * struct i3c_device - I3C device object + * @dev: device object to register the I3C dev to the device model + * @desc: pointer to an i3c device descriptor object. This link is updated + * every time the I3C device is rediscovered with a different dynamic + * address assigned + * @bus: I3C bus this device is attached to + * + * I3C device object exposed to I3C device drivers. The takes care of linking + * this object to the relevant &struct_i3c_dev_desc one. + * All I3C devs on the I3C bus are represented, including I3C masters. For each + * of them, we have an instance of &struct i3c_device. + */ +struct i3c_device { + struct device dev; + struct i3c_dev_desc *desc; + struct i3c_bus *bus; +}; + +/* + * The I3C specification says the maximum number of devices connected on the + * bus is 11, but this number depends on external parameters like trace length, + * capacitive load per Device, and the types of Devices present on the Bus. + * I3C master can also have limitations, so this number is just here as a + * reference and should be adjusted on a per-controller/per-board basis. + */ +#define I3C_BUS_MAX_DEVS 11 + +#define I3C_BUS_MAX_I3C_SCL_RATE 12900000 +#define I3C_BUS_TYP_I3C_SCL_RATE 12500000 +#define I3C_BUS_I2C_FM_PLUS_SCL_RATE 1000000 +#define I3C_BUS_I2C_FM_SCL_RATE 400000 +#define I3C_BUS_TLOW_OD_MIN_NS 200 + +/** + * enum i3c_bus_mode - I3C bus mode + * @I3C_BUS_MODE_PURE: only I3C devices are connected to the bus. No limitation + * expected + * @I3C_BUS_MODE_MIXED_FAST: I2C devices with 50ns spike filter are present on + * the bus. The only impact in this mode is that the + * high SCL pulse has to stay below 50ns to trick I2C + * devices when transmitting I3C frames + * @I3C_BUS_MODE_MIXED_SLOW: I2C devices without 50ns spike filter are present + * on the bus + */ +enum i3c_bus_mode { + I3C_BUS_MODE_PURE, + I3C_BUS_MODE_MIXED_FAST, + I3C_BUS_MODE_MIXED_SLOW, +}; + +/** + * enum i3c_addr_slot_status - I3C address slot status + * @I3C_ADDR_SLOT_FREE: address is free + * @I3C_ADDR_SLOT_RSVD: address is reserved + * @I3C_ADDR_SLOT_I2C_DEV: address is assigned to an I2C device + * @I3C_ADDR_SLOT_I3C_DEV: address is assigned to an I3C device + * @I3C_ADDR_SLOT_STATUS_MASK: address slot mask + * + * On an I3C bus, addresses are assigned dynamically, and we need to know which + * addresses are free to use and which ones are already assigned. + * + * Addresses marked as reserved are those reserved by the I3C protocol + * (broadcast address, ...). + */ +enum i3c_addr_slot_status { + I3C_ADDR_SLOT_FREE, + I3C_ADDR_SLOT_RSVD, + I3C_ADDR_SLOT_I2C_DEV, + I3C_ADDR_SLOT_I3C_DEV, + I3C_ADDR_SLOT_STATUS_MASK = 3, +}; + +/** + * struct i3c_bus - I3C bus object + * @cur_master: I3C master currently driving the bus. Since I3C is multi-master + * this can change over the time. Will be used to let a master + * know whether it needs to request bus ownership before sending + * a frame or not + * @id: bus ID. Assigned by the framework when register the bus + * @addrslots: a bitmap with 2-bits per-slot to encode the address status and + * ease the DAA (Dynamic Address Assignment) procedure (see + * &enum i3c_addr_slot_status) + * @mode: bus mode (see &enum i3c_bus_mode) + * @scl_rate.i3c: maximum rate for the clock signal when doing I3C SDR/priv + * transfers + * @scl_rate.i2c: maximum rate for the clock signal when doing I2C transfers + * @scl_rate: SCL signal rate for I3C and I2C mode + * @devs.i3c: contains a list of I3C device descriptors representing I3C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs.i2c: contains a list of I2C device descriptors representing I2C + * devices connected on the bus and successfully attached to the + * I3C master + * @devs: 2 lists containing all I3C/I2C devices connected to the bus + * @lock: read/write lock on the bus. This is needed to protect against + * operations that have an impact on the whole bus and the devices + * connected to it. For example, when asking slaves to drop their + * dynamic address (RSTDAA CCC), we need to make sure no one is trying + * to send I3C frames to these devices. + * Note that this lock does not protect against concurrency between + * devices: several drivers can send different I3C/I2C frames through + * the same master in parallel. This is the responsibility of the + * master to guarantee that frames are actually sent sequentially and + * not interlaced + * + * The I3C bus is represented with its own object and not implicitly described + * by the I3C master to cope with the multi-master functionality, where one bus + * can be shared amongst several masters, each of them requesting bus ownership + * when they need to. + */ +struct i3c_bus { + struct i3c_dev_desc *cur_master; + int id; + unsigned long addrslots[((I2C_MAX_ADDR + 1) * 2) / BITS_PER_LONG]; + enum i3c_bus_mode mode; + struct { + unsigned long i3c; + unsigned long i2c; + } scl_rate; + struct { + struct list_head i3c; + struct list_head i2c; + } devs; + struct rw_semaphore lock; +}; + +/** + * struct i3c_master_controller_ops - I3C master methods + * @bus_init: hook responsible for the I3C bus initialization. You should at + * least call master_set_info() from there and set the bus mode. + * You can also put controller specific initialization in there. + * This method is mandatory. + * @bus_cleanup: cleanup everything done in + * &i3c_master_controller_ops->bus_init(). + * This method is optional. + * @attach_i3c_dev: called every time an I3C device is attached to the bus. It + * can be after a DAA or when a device is statically declared + * by the FW, in which case it will only have a static address + * and the dynamic address will be 0. + * When this function is called, device information have not + * been retrieved yet. + * This is a good place to attach master controller specific + * data to I3C devices. + * This method is optional. + * @reattach_i3c_dev: called every time an I3C device has its addressed + * changed. It can be because the device has been powered + * down and has lost its address, or it can happen when a + * device had a static address and has been assigned a + * dynamic address with SETDASA. + * This method is optional. + * @detach_i3c_dev: called when an I3C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @do_daa: do a DAA (Dynamic Address Assignment) procedure. This is procedure + * should send an ENTDAA CCC command and then add all devices + * discovered sure the DAA using i3c_master_add_i3c_dev_locked(). + * Add devices added with i3c_master_add_i3c_dev_locked() will then be + * attached or re-attached to the controller. + * This method is mandatory. + * @supports_ccc_cmd: should return true if the CCC command is supported, false + * otherwise. + * This method is optional, if not provided the core assumes + * all CCC commands are supported. + * @send_ccc_cmd: send a CCC command + * This method is mandatory. + * @priv_xfers: do one or several private I3C SDR transfers + * This method is mandatory. + * @attach_i2c_dev: called every time an I2C device is attached to the bus. + * This is a good place to attach master controller specific + * data to I2C devices. + * This method is optional. + * @detach_i2c_dev: called when an I2C device is detached from the bus. Usually + * happens when the master device is unregistered. + * This method is optional. + * @i2c_xfers: do one or several I2C transfers. Note that, unlike i3c + * transfers, the core does not guarantee that buffers attached to + * the transfers are DMA-safe. If drivers want to have DMA-safe + * buffers, they should use the i2c_get_dma_safe_msg_buf() + * and i2c_put_dma_safe_msg_buf() helpers provided by the I2C + * framework. + * This method is mandatory. + * @i2c_funcs: expose the supported I2C functionalities. + * This method is mandatory. + * @request_ibi: attach an IBI handler to an I3C device. This implies defining + * an IBI handler and the constraints of the IBI (maximum payload + * length and number of pre-allocated slots). + * Some controllers support less IBI-capable devices than regular + * devices, so this method might return -%EBUSY if there's no + * more space for an extra IBI registration + * This method is optional. + * @free_ibi: free an IBI previously requested with ->request_ibi(). The IBI + * should have been disabled with ->disable_irq() prior to that + * This method is mandatory only if ->request_ibi is not NULL. + * @enable_ibi: enable the IBI. Only valid if ->request_ibi() has been called + * prior to ->enable_ibi(). The controller should first enable + * the IBI on the controller end (for example, unmask the hardware + * IRQ) and then send the ENEC CCC command (with the IBI flag set) + * to the I3C device. + * This method is mandatory only if ->request_ibi is not NULL. + * @disable_ibi: disable an IBI. First send the DISEC CCC command with the IBI + * flag set and then deactivate the hardware IRQ on the + * controller end. + * This method is mandatory only if ->request_ibi is not NULL. + * @recycle_ibi_slot: recycle an IBI slot. Called every time an IBI has been + * processed by its handler. The IBI slot should be put back + * in the IBI slot pool so that the controller can re-use it + * for a future IBI + * This method is mandatory only if ->request_ibi is not + * NULL. + */ +struct i3c_master_controller_ops { + int (*bus_init)(struct i3c_master_controller *master); + void (*bus_cleanup)(struct i3c_master_controller *master); + int (*attach_i3c_dev)(struct i3c_dev_desc *dev); + int (*reattach_i3c_dev)(struct i3c_dev_desc *dev, u8 old_dyn_addr); + void (*detach_i3c_dev)(struct i3c_dev_desc *dev); + int (*do_daa)(struct i3c_master_controller *master); + bool (*supports_ccc_cmd)(struct i3c_master_controller *master, + const struct i3c_ccc_cmd *cmd); + int (*send_ccc_cmd)(struct i3c_master_controller *master, + struct i3c_ccc_cmd *cmd); + int (*priv_xfers)(struct i3c_dev_desc *dev, + struct i3c_priv_xfer *xfers, + int nxfers); + int (*attach_i2c_dev)(struct i2c_dev_desc *dev); + void (*detach_i2c_dev)(struct i2c_dev_desc *dev); + int (*i2c_xfers)(struct i2c_dev_desc *dev, + const struct i2c_msg *xfers, int nxfers); + u32 (*i2c_funcs)(struct i3c_master_controller *master); + int (*request_ibi)(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); + void (*free_ibi)(struct i3c_dev_desc *dev); + int (*enable_ibi)(struct i3c_dev_desc *dev); + int (*disable_ibi)(struct i3c_dev_desc *dev); + void (*recycle_ibi_slot)(struct i3c_dev_desc *dev, + struct i3c_ibi_slot *slot); +}; + +/** + * struct i3c_master_controller - I3C master controller object + * @dev: device to be registered to the device-model + * @this: an I3C device object representing this master. This device will be + * added to the list of I3C devs available on the bus + * @i2c: I2C adapter used for backward compatibility. This adapter is + * registered to the I2C subsystem to be as transparent as possible to + * existing I2C drivers + * @ops: master operations. See &struct i3c_master_controller_ops + * @secondary: true if the master is a secondary master + * @init_done: true when the bus initialization is done + * @boardinfo.i3c: list of I3C boardinfo objects + * @boardinfo.i2c: list of I2C boardinfo objects + * @boardinfo: board-level information attached to devices connected on the bus + * @bus: I3C bus exposed by this master + * @wq: workqueue used to execute IBI handlers. Can also be used by master + * drivers if they need to postpone operations that need to take place + * in a thread context. Typical examples are Hot Join processing which + * requires taking the bus lock in maintenance, which in turn, can only + * be done from a sleep-able context + * + * A &struct i3c_master_controller has to be registered to the I3C subsystem + * through i3c_master_register(). None of &struct i3c_master_controller fields + * should be set manually, just pass appropriate values to + * i3c_master_register(). + */ +struct i3c_master_controller { + struct device dev; + struct i3c_dev_desc *this; + struct i2c_adapter i2c; + const struct i3c_master_controller_ops *ops; + unsigned int secondary : 1; + unsigned int init_done : 1; + struct { + struct list_head i3c; + struct list_head i2c; + } boardinfo; + struct i3c_bus bus; + struct workqueue_struct *wq; +}; + +/** + * i3c_bus_for_each_i2cdev() - iterate over all I2C devices present on the bus + * @bus: the I3C bus + * @dev: an I2C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I2C devs present on the bus. + */ +#define i3c_bus_for_each_i2cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i2c, common.node) + +/** + * i3c_bus_for_each_i3cdev() - iterate over all I3C devices present on the bus + * @bus: the I3C bus + * @dev: and I3C device descriptor pointer updated to point to the current slot + * at each iteration of the loop + * + * Iterate over all I3C devs present on the bus. + */ +#define i3c_bus_for_each_i3cdev(bus, dev) \ + list_for_each_entry(dev, &(bus)->devs.i3c, common.node) + +int i3c_master_do_i2c_xfers(struct i3c_master_controller *master, + const struct i2c_msg *xfers, + int nxfers); + +int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr, + u8 evts); +int i3c_master_entdaa_locked(struct i3c_master_controller *master); +int i3c_master_defslvs_locked(struct i3c_master_controller *master); + +int i3c_master_get_free_addr(struct i3c_master_controller *master, + u8 start_addr); + +int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, + u8 addr); +int i3c_master_do_daa(struct i3c_master_controller *master); + +int i3c_master_set_info(struct i3c_master_controller *master, + const struct i3c_device_info *info); + +int i3c_master_register(struct i3c_master_controller *master, + struct device *parent, + const struct i3c_master_controller_ops *ops, + bool secondary); +int i3c_master_unregister(struct i3c_master_controller *master); + +/** + * i3c_dev_get_master_data() - get master private data attached to an I3C + * device descriptor + * @dev: the I3C device descriptor to get private data from + * + * Return: the private data previously attached with i3c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i3c_dev_get_master_data(const struct i3c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i3c_dev_set_master_data() - attach master private data to an I3C device + * descriptor + * @dev: the I3C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i3c_dev_get_master_data(). + */ +static inline void i3c_dev_set_master_data(struct i3c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i2c_dev_get_master_data() - get master private data attached to an I2C + * device descriptor + * @dev: the I2C device descriptor to get private data from + * + * Return: the private data previously attached with i2c_dev_set_master_data() + * or NULL if no data has been attached to the device. + */ +static inline void *i2c_dev_get_master_data(const struct i2c_dev_desc *dev) +{ + return dev->common.master_priv; +} + +/** + * i2c_dev_set_master_data() - attach master private data to an I2C device + * descriptor + * @dev: the I2C device descriptor to attach private data to + * @data: private data + * + * This functions allows a master controller to attach per-device private data + * which can then be retrieved with i2c_device_get_master_data(). + */ +static inline void i2c_dev_set_master_data(struct i2c_dev_desc *dev, + void *data) +{ + dev->common.master_priv = data; +} + +/** + * i3c_dev_get_master() - get master used to communicate with a device + * @dev: I3C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i3c_dev_get_master(struct i3c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i2c_dev_get_master() - get master used to communicate with a device + * @dev: I2C dev + * + * Return: the master controller driving @dev + */ +static inline struct i3c_master_controller * +i2c_dev_get_master(struct i2c_dev_desc *dev) +{ + return dev->common.master; +} + +/** + * i3c_master_get_bus() - get the bus attached to a master + * @master: master object + * + * Return: the I3C bus @master is connected to + */ +static inline struct i3c_bus * +i3c_master_get_bus(struct i3c_master_controller *master) +{ + return &master->bus; +} + +struct i3c_generic_ibi_pool; + +struct i3c_generic_ibi_pool * +i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev, + const struct i3c_ibi_setup *req); +void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool); + +struct i3c_ibi_slot * +i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool); +void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool, + struct i3c_ibi_slot *slot); + +void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot); + +struct i3c_ibi_slot *i3c_master_get_free_ibi_slot(struct i3c_dev_desc *dev); + +#endif /* I3C_MASTER_H */ diff --git a/include/linux/leds.h b/include/linux/leds.h index 7393a316d9fa..580cbaef789a 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -487,4 +487,24 @@ struct led_pattern { int brightness; }; +enum led_audio { + LED_AUDIO_MUTE, /* master mute LED */ + LED_AUDIO_MICMUTE, /* mic mute LED */ + NUM_AUDIO_LEDS +}; + +#if IS_ENABLED(CONFIG_LEDS_TRIGGER_AUDIO) +enum led_brightness ledtrig_audio_get(enum led_audio type); +void ledtrig_audio_set(enum led_audio type, enum led_brightness state); +#else +static inline enum led_brightness ledtrig_audio_get(enum led_audio type) +{ + return LED_OFF; +} +static inline void ledtrig_audio_set(enum led_audio type, + enum led_brightness state) +{ +} +#endif + #endif /* __LINUX_LEDS_H_INCLUDED */ diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 517e60eecbcb..1293695245df 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -35,7 +35,7 @@ enum axp20x_variants { #define AXP152_ALDO_OP_MODE 0x13 #define AXP152_LDO0_CTRL 0x15 #define AXP152_DCDC2_V_OUT 0x23 -#define AXP152_DCDC2_V_SCAL 0x25 +#define AXP152_DCDC2_V_RAMP 0x25 #define AXP152_DCDC1_V_OUT 0x26 #define AXP152_DCDC3_V_OUT 0x27 #define AXP152_ALDO12_V_OUT 0x28 @@ -53,7 +53,7 @@ enum axp20x_variants { #define AXP20X_USB_OTG_STATUS 0x02 #define AXP20X_PWR_OUT_CTRL 0x12 #define AXP20X_DCDC2_V_OUT 0x23 -#define AXP20X_DCDC2_LDO3_V_SCAL 0x25 +#define AXP20X_DCDC2_LDO3_V_RAMP 0x25 #define AXP20X_DCDC3_V_OUT 0x27 #define AXP20X_LDO24_V_OUT 0x28 #define AXP20X_LDO3_V_OUT 0x29 diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index b19c370fe81a..f346167c0e00 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -20,9 +20,6 @@ #define WM8994_NUM_AIF 3 struct wm8994_ldo_pdata { - /** GPIOs to enable regulator, 0 or less if not available */ - int enable; - const struct regulator_init_data *init_data; }; diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 34e17e6f8942..4e77bfe0b580 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -582,11 +582,13 @@ struct mlx5_ifc_flow_table_nic_cap_bits { }; struct mlx5_ifc_flow_table_eswitch_cap_bits { - u8 reserved_at_0[0x1c]; - u8 fdb_multi_path_to_table[0x1]; - u8 reserved_at_1d[0x1]; + u8 reserved_at_0[0x1a]; u8 multi_fdb_encap[0x1]; - u8 reserved_at_1e[0x1e1]; + u8 reserved_at_1b[0x1]; + u8 fdb_multi_path_to_table[0x1]; + u8 reserved_at_1d[0x3]; + + u8 reserved_at_20[0x1e0]; struct mlx5_ifc_flow_table_prop_layout_bits flow_table_properties_nic_esw_fdb; diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 01797cb4587e..f9bd2f34b99f 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -448,6 +448,23 @@ struct pci_epf_device_id { kernel_ulong_t driver_data; }; +/* i3c */ + +#define I3C_MATCH_DCR 0x1 +#define I3C_MATCH_MANUF 0x2 +#define I3C_MATCH_PART 0x4 +#define I3C_MATCH_EXTRA_INFO 0x8 + +struct i3c_device_id { + __u8 match_flags; + __u8 dcr; + __u16 manuf_id; + __u16 part_id; + __u16 extra_info; + + const void *data; +}; + /* spi */ #define SPI_NAME_SIZE 32 @@ -565,7 +582,7 @@ struct platform_device_id { /** * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus * @phy_id: The result of - * (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&PHYSID2)) & @phy_id_mask + * (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&MII_PHYSID2)) & @phy_id_mask * for this PHY type * @phy_id_mask: Defines the significant bits of @phy_id. A value of 0 * is used to terminate an array of struct mdio_device_id. diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 9b57a9b1b081..cbf77168658c 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -377,6 +377,7 @@ struct cfi_fixup { #define CFI_MFR_SHARP 0x00B0 #define CFI_MFR_SST 0x00BF #define CFI_MFR_ST 0x0020 /* STMicroelectronics */ +#define CFI_MFR_MICRON 0x002C /* Micron */ #define CFI_MFR_TOSHIBA 0x0098 #define CFI_MFR_WINBOND 0x00DA diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index cd0be91bdefa..ba8fa9072aca 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -207,6 +207,7 @@ struct mtd_debug_info { struct mtd_info { u_char type; uint32_t flags; + uint32_t orig_flags; /* Flags as before running mtd checks */ uint64_t size; // Total size of the MTD /* "Major" erase size for the device. Naïve users may take this @@ -386,7 +387,7 @@ static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd) return dev_of_node(&mtd->dev); } -static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops) +static inline u32 mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops) { return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize; } diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index e10b126e148f..33e240acdc6d 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -203,9 +203,12 @@ enum nand_ecc_algo { */ #define NAND_IS_BOOT_MEDIUM 0x00400000 -/* Options set by nand scan */ -/* Nand scan has allocated controller struct */ -#define NAND_CONTROLLER_ALLOC 0x80000000 +/* + * Do not try to tweak the timings at runtime. This is needed when the + * controller initializes the timings on itself or when it relies on + * configuration done by the bootloader. + */ +#define NAND_KEEP_TIMINGS 0x00800000 /* Cell info constants */ #define NAND_CI_CHIPNR_MSK 0x03 @@ -245,49 +248,6 @@ struct nand_id { }; /** - * struct nand_controller_ops - Controller operations - * - * @attach_chip: this method is called after the NAND detection phase after - * flash ID and MTD fields such as erase size, page size and OOB - * size have been set up. ECC requirements are available if - * provided by the NAND chip or device tree. Typically used to - * choose the appropriate ECC configuration and allocate - * associated resources. - * This hook is optional. - * @detach_chip: free all resources allocated/claimed in - * nand_controller_ops->attach_chip(). - * This hook is optional. - */ -struct nand_controller_ops { - int (*attach_chip)(struct nand_chip *chip); - void (*detach_chip)(struct nand_chip *chip); -}; - -/** - * struct nand_controller - Structure used to describe a NAND controller - * - * @lock: protection lock - * @active: the mtd device which holds the controller currently - * @wq: wait queue to sleep on if a NAND operation is in - * progress used instead of the per chip wait queue - * when a hw controller is available. - * @ops: NAND controller operations. - */ -struct nand_controller { - spinlock_t lock; - struct nand_chip *active; - wait_queue_head_t wq; - const struct nand_controller_ops *ops; -}; - -static inline void nand_controller_init(struct nand_controller *nfc) -{ - nfc->active = NULL; - spin_lock_init(&nfc->lock); - init_waitqueue_head(&nfc->wq); -} - -/** * struct nand_ecc_step_info - ECC step information of ECC engine * @stepsize: data bytes per ECC step * @strengths: array of supported strengths @@ -879,18 +839,21 @@ struct nand_op_parser { /** * struct nand_operation - NAND operation descriptor + * @cs: the CS line to select for this NAND operation * @instrs: array of instructions to execute * @ninstrs: length of the @instrs array * * The actual operation structure that will be passed to chip->exec_op(). */ struct nand_operation { + unsigned int cs; const struct nand_op_instr *instrs; unsigned int ninstrs; }; -#define NAND_OPERATION(_instrs) \ +#define NAND_OPERATION(_cs, _instrs) \ { \ + .cs = _cs, \ .instrs = _instrs, \ .ninstrs = ARRAY_SIZE(_instrs), \ } @@ -898,11 +861,68 @@ struct nand_operation { int nand_op_parser_exec_op(struct nand_chip *chip, const struct nand_op_parser *parser, const struct nand_operation *op, bool check_only); +/** + * struct nand_controller_ops - Controller operations + * + * @attach_chip: this method is called after the NAND detection phase after + * flash ID and MTD fields such as erase size, page size and OOB + * size have been set up. ECC requirements are available if + * provided by the NAND chip or device tree. Typically used to + * choose the appropriate ECC configuration and allocate + * associated resources. + * This hook is optional. + * @detach_chip: free all resources allocated/claimed in + * nand_controller_ops->attach_chip(). + * This hook is optional. + * @exec_op: controller specific method to execute NAND operations. + * This method replaces chip->legacy.cmdfunc(), + * chip->legacy.{read,write}_{buf,byte,word}(), + * chip->legacy.dev_ready() and chip->legacy.waifunc(). + * @setup_data_interface: setup the data interface and timing. If + * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this + * means the configuration should not be applied but + * only checked. + * This hook is optional. + */ +struct nand_controller_ops { + int (*attach_chip)(struct nand_chip *chip); + void (*detach_chip)(struct nand_chip *chip); + int (*exec_op)(struct nand_chip *chip, + const struct nand_operation *op, + bool check_only); + int (*setup_data_interface)(struct nand_chip *chip, int chipnr, + const struct nand_data_interface *conf); +}; + +/** + * struct nand_controller - Structure used to describe a NAND controller + * + * @lock: protection lock + * @active: the mtd device which holds the controller currently + * @wq: wait queue to sleep on if a NAND operation is in + * progress used instead of the per chip wait queue + * when a hw controller is available. + * @ops: NAND controller operations. + */ +struct nand_controller { + spinlock_t lock; + struct nand_chip *active; + wait_queue_head_t wq; + const struct nand_controller_ops *ops; +}; + +static inline void nand_controller_init(struct nand_controller *nfc) +{ + nfc->active = NULL; + spin_lock_init(&nfc->lock); + init_waitqueue_head(&nfc->wq); +} /** * struct nand_legacy - NAND chip legacy fields/hooks * @IO_ADDR_R: address to read the 8 I/O lines of the flash device * @IO_ADDR_W: address to write the 8 I/O lines of the flash device + * @select_chip: select/deselect a specific target/die * @read_byte: read one byte from the chip * @write_byte: write a single byte to the chip on the low 8 I/O lines * @write_buf: write data from the buffer to the chip @@ -921,6 +941,8 @@ int nand_op_parser_exec_op(struct nand_chip *chip, * @get_features: get the NAND chip features * @chip_delay: chip dependent delay for transferring data from array to read * regs (tR). + * @dummy_controller: dummy controller implementation for drivers that can + * only control a single chip * * If you look at this structure you're already wrong. These fields/hooks are * all deprecated. @@ -928,6 +950,7 @@ int nand_op_parser_exec_op(struct nand_chip *chip, struct nand_legacy { void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; + void (*select_chip)(struct nand_chip *chip, int cs); u8 (*read_byte)(struct nand_chip *chip); void (*write_byte)(struct nand_chip *chip, u8 byte); void (*write_buf)(struct nand_chip *chip, const u8 *buf, int len); @@ -945,6 +968,7 @@ struct nand_legacy { int (*get_features)(struct nand_chip *chip, int feature_addr, u8 *subfeature_para); int chip_delay; + struct nand_controller dummy_controller; }; /** @@ -955,17 +979,10 @@ struct nand_legacy { * you're modifying an existing driver that is using those * fields/hooks, you should consider reworking the driver * avoid using them. - * @select_chip: [REPLACEABLE] select chip nr - * @exec_op: controller specific method to execute NAND operations. - * This method replaces ->cmdfunc(), - * ->legacy.{read,write}_{buf,byte,word}(), - * ->legacy.dev_ready() and ->waifunc(). * @setup_read_retry: [FLASHSPECIFIC] flash (vendor) specific function for * setting the read-retry mode. Mostly needed for MLC NAND. * @ecc: [BOARDSPECIFIC] ECC control structure * @buf_align: minimum buffer alignment required by a platform - * @dummy_controller: dummy controller implementation for drivers that can - * only control a single chip * @state: [INTERN] the current state of the NAND device * @oob_poi: "poison value buffer," used for laying out OOB data * before writing @@ -1012,11 +1029,11 @@ struct nand_legacy { * this nand device will encounter their life times. * @blocks_per_die: [INTERN] The number of PEBs in a die * @data_interface: [INTERN] NAND interface timing information + * @cur_cs: currently selected target. -1 means no target selected, + * otherwise we should always have cur_cs >= 0 && + * cur_cs < numchips. NAND Controller drivers should not + * modify this value, but they're allowed to read it. * @read_retries: [INTERN] the number of read retry modes supported - * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If - * chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this - * means the configuration should not be applied but - * only checked. * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash * lookup. @@ -1037,13 +1054,7 @@ struct nand_chip { struct nand_legacy legacy; - void (*select_chip)(struct nand_chip *chip, int cs); - int (*exec_op)(struct nand_chip *chip, - const struct nand_operation *op, - bool check_only); int (*setup_read_retry)(struct nand_chip *chip, int retry_mode); - int (*setup_data_interface)(struct nand_chip *chip, int chipnr, - const struct nand_data_interface *conf); unsigned int options; unsigned int bbt_options; @@ -1073,6 +1084,8 @@ struct nand_chip { struct nand_data_interface data_interface; + int cur_cs; + int read_retries; flstate_t state; @@ -1082,7 +1095,6 @@ struct nand_chip { struct nand_ecc_ctrl ecc; unsigned long buf_align; - struct nand_controller dummy_controller; uint8_t *bbt; struct nand_bbt_descr *bbt_td; @@ -1098,15 +1110,6 @@ struct nand_chip { } manufacturer; }; -static inline int nand_exec_op(struct nand_chip *chip, - const struct nand_operation *op) -{ - if (!chip->exec_op) - return -ENOTSUPP; - - return chip->exec_op(chip, op, false); -} - extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops; extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops; @@ -1345,5 +1348,12 @@ void nand_release(struct nand_chip *chip); * instruction and have no physical pin to check it. */ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms); +struct gpio_desc; +int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod, + unsigned long timeout_ms); + +/* Select/deselect a NAND target. */ +void nand_select_target(struct nand_chip *chip, unsigned int cs); +void nand_deselect_target(struct nand_chip *chip); #endif /* __LINUX_MTD_RAWNAND_H */ diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index c759d403cbc0..78fc2d4218c8 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -1,20 +1,8 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * SuperH FLCTL nand controller * * Copyright © 2008 Renesas Solutions Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #ifndef __SH_FLCTL_H__ diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 7f0c7303575e..fa2d89e38e40 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -1,10 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __LINUX_MTD_SPI_NOR_H @@ -23,7 +19,8 @@ #define SNOR_MFR_ATMEL CFI_MFR_ATMEL #define SNOR_MFR_GIGADEVICE 0xc8 #define SNOR_MFR_INTEL CFI_MFR_INTEL -#define SNOR_MFR_MICRON CFI_MFR_ST /* ST Micro <--> Micron */ +#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */ +#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */ #define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX #define SNOR_MFR_SPANSION CFI_MFR_AMD #define SNOR_MFR_SST CFI_MFR_SST @@ -236,6 +233,8 @@ enum spi_nor_option_flags { SNOR_F_READY_XSR_RDY = BIT(4), SNOR_F_USE_CLSR = BIT(5), SNOR_F_BROKEN_RESET = BIT(6), + SNOR_F_4B_OPCODES = BIT(7), + SNOR_F_HAS_4BAIT = BIT(8), }; /** diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h index 088ff96c3eb6..b92e2aa955b6 100644 --- a/include/linux/mtd/spinand.h +++ b/include/linux/mtd/spinand.h @@ -194,8 +194,10 @@ struct spinand_manufacturer { }; /* SPI NAND manufacturers */ +extern const struct spinand_manufacturer gigadevice_spinand_manufacturer; extern const struct spinand_manufacturer macronix_spinand_manufacturer; extern const struct spinand_manufacturer micron_spinand_manufacturer; +extern const struct spinand_manufacturer toshiba_spinand_manufacturer; extern const struct spinand_manufacturer winbond_spinand_manufacturer; /** diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index 4a520d3304a2..cf09ab37b45b 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -62,18 +62,6 @@ static inline bool lockdep_nfnl_is_held(__u8 subsys_id) } #endif /* CONFIG_PROVE_LOCKING */ -/* - * nfnl_dereference - fetch RCU pointer when updates are prevented by subsys mutex - * - * @p: The pointer to read, prior to dereferencing - * @ss: The nfnetlink subsystem ID - * - * Return the value of the specified RCU-protected pointer, but omit - * the READ_ONCE(), because caller holds the NFNL subsystem mutex. - */ -#define nfnl_dereference(p, ss) \ - rcu_dereference_protected(p, lockdep_nfnl_is_held(ss)) - #define MODULE_ALIAS_NFNL_SUBSYS(subsys) \ MODULE_ALIAS("nfnetlink-subsys-" __stringify(subsys)) diff --git a/include/linux/pci.h b/include/linux/pci.h index 11c71c4ecf75..51a5a5217667 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1960,7 +1960,11 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state); int pcibios_add_device(struct pci_dev *dev); void pcibios_release_device(struct pci_dev *dev); +#ifdef CONFIG_PCI void pcibios_penalize_isa_irq(int irq, int active); +#else +static inline void pcibios_penalize_isa_irq(int irq, int active) {} +#endif int pcibios_alloc_irq(struct pci_dev *dev); void pcibios_free_irq(struct pci_dev *dev); resource_size_t pcibios_default_alignment(void); diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index 85ad68f9206a..7fe80f1c7e08 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -79,6 +79,7 @@ struct davinci_mcasp_pdata { /* McASP specific fields */ int tdm_slots; u8 op_mode; + u8 dismod; u8 num_serializer; u8 *serial_dir; u8 version; diff --git a/include/linux/pm.h b/include/linux/pm.h index e723b78d8357..0bd9de116826 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -26,6 +26,7 @@ #include <linux/spinlock.h> #include <linux/wait.h> #include <linux/timer.h> +#include <linux/hrtimer.h> #include <linux/completion.h> /* @@ -608,7 +609,7 @@ struct dev_pm_info { unsigned int should_wakeup:1; #endif #ifdef CONFIG_PM - struct timer_list suspend_timer; + struct hrtimer suspend_timer; unsigned long timer_expires; struct work_struct work; wait_queue_head_t wait_queue; @@ -631,7 +632,7 @@ struct dev_pm_info { enum rpm_status runtime_status; int runtime_error; int autosuspend_delay; - unsigned long last_busy; + u64 last_busy; unsigned long active_jiffies; unsigned long suspended_jiffies; unsigned long accounting_timestamp; diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 3b5d7280e52e..dd364abb649a 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -73,6 +73,7 @@ struct genpd_power_state { struct genpd_lock_ops; struct dev_pm_opp; +struct opp_table; struct generic_pm_domain { struct device dev; @@ -94,6 +95,7 @@ struct generic_pm_domain { unsigned int performance_state; /* Aggregated max performance state */ int (*power_off)(struct generic_pm_domain *domain); int (*power_on)(struct generic_pm_domain *domain); + struct opp_table *opp_table; /* OPP table of the genpd */ unsigned int (*opp_to_performance_state)(struct generic_pm_domain *genpd, struct dev_pm_opp *opp); int (*set_performance_state)(struct generic_pm_domain *genpd, @@ -134,6 +136,10 @@ struct gpd_link { struct list_head master_node; struct generic_pm_domain *slave; struct list_head slave_node; + + /* Sub-domain's per-master domain performance state */ + unsigned int performance_state; + unsigned int prev_performance_state; }; struct gpd_timing_data { @@ -258,8 +264,8 @@ int of_genpd_add_subdomain(struct of_phandle_args *parent, struct generic_pm_domain *of_genpd_remove_last(struct device_node *np); int of_genpd_parse_idle_states(struct device_node *dn, struct genpd_power_state **states, int *n); -unsigned int of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *np); +unsigned int pm_genpd_opp_to_performance_state(struct device *genpd_dev, + struct dev_pm_opp *opp); int genpd_dev_pm_attach(struct device *dev); struct device *genpd_dev_pm_attach_by_id(struct device *dev, @@ -300,8 +306,8 @@ static inline int of_genpd_parse_idle_states(struct device_node *dn, } static inline unsigned int -of_genpd_opp_to_performance_state(struct device *dev, - struct device_node *np) +pm_genpd_opp_to_performance_state(struct device *genpd_dev, + struct dev_pm_opp *opp) { return 0; } diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 5d399eeef172..0a2a88e5a383 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -126,6 +126,9 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char * name); void dev_pm_opp_put_clkname(struct opp_table *opp_table); struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table); +struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index); +void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table, struct device *virt_dev); +int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate); int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask); int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask); @@ -272,6 +275,18 @@ static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {} +static inline struct opp_table *dev_pm_opp_set_genpd_virt_dev(struct device *dev, struct device *virt_dev, int index) +{ + return ERR_PTR(-ENOTSUPP); +} + +static inline void dev_pm_opp_put_genpd_virt_dev(struct opp_table *opp_table, struct device *virt_dev) {} + +static inline int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate) +{ + return -ENOTSUPP; +} + static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) { return -ENOTSUPP; @@ -305,8 +320,8 @@ int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask); void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask); int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask); struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device *dev); -struct dev_pm_opp *of_dev_pm_opp_find_required_opp(struct device *dev, struct device_node *np); struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp); +int of_get_required_opp_performance_state(struct device_node *np, int index); #else static inline int dev_pm_opp_of_add_table(struct device *dev) { @@ -341,13 +356,13 @@ static inline struct device_node *dev_pm_opp_of_get_opp_desc_node(struct device return NULL; } -static inline struct dev_pm_opp *of_dev_pm_opp_find_required_opp(struct device *dev, struct device_node *np) +static inline struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp) { return NULL; } -static inline struct device_node *dev_pm_opp_get_of_node(struct dev_pm_opp *opp) +static inline int of_get_required_opp_performance_state(struct device_node *np, int index) { - return NULL; + return -ENOTSUPP; } #endif diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index f0fc4700b6ff..54af4eef169f 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -51,7 +51,7 @@ extern void pm_runtime_no_callbacks(struct device *dev); extern void pm_runtime_irq_safe(struct device *dev); extern void __pm_runtime_use_autosuspend(struct device *dev, bool use); extern void pm_runtime_set_autosuspend_delay(struct device *dev, int delay); -extern unsigned long pm_runtime_autosuspend_expiration(struct device *dev); +extern u64 pm_runtime_autosuspend_expiration(struct device *dev); extern void pm_runtime_update_max_time_suspended(struct device *dev, s64 delta_ns); extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable); @@ -105,7 +105,7 @@ static inline bool pm_runtime_callbacks_present(struct device *dev) static inline void pm_runtime_mark_last_busy(struct device *dev) { - WRITE_ONCE(dev->power.last_busy, jiffies); + WRITE_ONCE(dev->power.last_busy, ktime_to_ns(ktime_get())); } static inline bool pm_runtime_is_irq_safe(struct device *dev) @@ -168,7 +168,7 @@ static inline void __pm_runtime_use_autosuspend(struct device *dev, bool use) {} static inline void pm_runtime_set_autosuspend_delay(struct device *dev, int delay) {} -static inline unsigned long pm_runtime_autosuspend_expiration( +static inline u64 pm_runtime_autosuspend_expiration( struct device *dev) { return 0; } static inline void pm_runtime_set_memalloc_noio(struct device *dev, bool enable){} diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 7b81dad712de..d0b37e937037 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * OMAP Smartreflex Defines and Routines * @@ -11,10 +12,6 @@ * * Copyright (C) 2007 Texas Instruments, Inc. * Lesly A M <x0080970@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __POWER_SMARTREFLEX_H @@ -303,9 +300,6 @@ void omap_sr_enable(struct voltagedomain *voltdm); void omap_sr_disable(struct voltagedomain *voltdm); void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); -/* API to register the pmic specific data with the smartreflex driver. */ -void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); - /* Smartreflex driver hooks to be called from Smartreflex class driver */ int sr_enable(struct omap_sr *sr, unsigned long volt); void sr_disable(struct omap_sr *sr); @@ -320,7 +314,5 @@ static inline void omap_sr_enable(struct voltagedomain *voltdm) {} static inline void omap_sr_disable(struct voltagedomain *voltdm) {} static inline void omap_sr_disable_reset_volt( struct voltagedomain *voltdm) {} -static inline void omap_sr_register_pmic( - struct omap_sr_pmic_data *pmic_data) {} #endif #endif diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 56518adc31dd..d5199b507d79 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -349,42 +349,6 @@ static inline int pwm_config(struct pwm_device *pwm, int duty_ns, } /** - * pwm_set_polarity() - configure the polarity of a PWM signal - * @pwm: PWM device - * @polarity: new polarity of the PWM signal - * - * Note that the polarity cannot be configured while the PWM device is - * enabled. - * - * Returns: 0 on success or a negative error code on failure. - */ -static inline int pwm_set_polarity(struct pwm_device *pwm, - enum pwm_polarity polarity) -{ - struct pwm_state state; - - if (!pwm) - return -EINVAL; - - pwm_get_state(pwm, &state); - if (state.polarity == polarity) - return 0; - - /* - * Changing the polarity of a running PWM without adjusting the - * dutycycle/period value is a bit risky (can introduce glitches). - * Return -EBUSY in this case. - * Note that this is allowed when using pwm_apply_state() because - * the user specifies all the parameters. - */ - if (state.enabled) - return -EBUSY; - - state.polarity = polarity; - return pwm_apply_state(pwm, &state); -} - -/** * pwm_enable() - start a PWM output toggling * @pwm: PWM device * @@ -483,12 +447,6 @@ static inline int pwm_capture(struct pwm_device *pwm, return -EINVAL; } -static inline int pwm_set_polarity(struct pwm_device *pwm, - enum pwm_polarity polarity) -{ - return -ENOTSUPP; -} - static inline int pwm_enable(struct pwm_device *pwm) { return -EINVAL; diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 25602afd4844..f3f76051e8b0 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -508,7 +508,7 @@ static inline int regulator_get_error_flags(struct regulator *regulator, static inline int regulator_set_load(struct regulator *regulator, int load_uA) { - return REGULATOR_MODE_NORMAL; + return 0; } static inline int regulator_allow_bypass(struct regulator *regulator, diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index a9c030192147..389bcaf7900f 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -15,11 +15,12 @@ #ifndef __LINUX_REGULATOR_DRIVER_H_ #define __LINUX_REGULATOR_DRIVER_H_ -#define MAX_COUPLED 4 +#define MAX_COUPLED 2 #include <linux/device.h> #include <linux/notifier.h> #include <linux/regulator/consumer.h> +#include <linux/ww_mutex.h> struct gpio_desc; struct regmap; @@ -462,7 +463,7 @@ struct regulator_dev { struct coupling_desc coupling_desc; struct blocking_notifier_head notifier; - struct mutex mutex; /* consumer lock */ + struct ww_mutex mutex; /* consumer lock */ struct task_struct *mutex_owner; int ref_cnt; struct module *owner; @@ -473,7 +474,6 @@ struct regulator_dev { struct regmap *regmap; struct delayed_work disable_work; - int deferred_disables; void *reg_data; /* regulator_dev data */ @@ -545,4 +545,7 @@ int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, bool enable); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); +void regulator_lock(struct regulator_dev *rdev); +void regulator_unlock(struct regulator_dev *rdev); + #endif diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index a459a5e973a7..1d34a70ffda2 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -158,6 +158,9 @@ struct regulation_constraints { /* used for coupled regulators */ int max_spread; + /* used for changing voltage in steps */ + int max_uV_step; + /* valid regulator operating modes for this machine */ unsigned int valid_modes_mask; diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h index cb5aecd40f07..331d7d940c7a 100644 --- a/include/linux/regulator/pfuze100.h +++ b/include/linux/regulator/pfuze100.h @@ -33,7 +33,8 @@ #define PFUZE100_VGEN4 12 #define PFUZE100_VGEN5 13 #define PFUZE100_VGEN6 14 -#define PFUZE100_MAX_REGULATOR 15 +#define PFUZE100_COIN 15 +#define PFUZE100_MAX_REGULATOR 16 #define PFUZE200_SW1AB 0 #define PFUZE200_SW2 1 diff --git a/include/linux/reservation.h b/include/linux/reservation.h index 02166e815afb..2f0ffca35780 100644 --- a/include/linux/reservation.h +++ b/include/linux/reservation.h @@ -68,7 +68,6 @@ struct reservation_object_list { * @seq: sequence count for managing RCU read-side synchronization * @fence_excl: the exclusive fence, if there is one currently * @fence: list of current shared fences - * @staged: staged copy of shared fences for RCU updates */ struct reservation_object { struct ww_mutex lock; @@ -76,7 +75,6 @@ struct reservation_object { struct dma_fence __rcu *fence_excl; struct reservation_object_list __rcu *fence; - struct reservation_object_list *staged; }; #define reservation_object_held(obj) lockdep_is_held(&(obj)->lock.base) @@ -95,7 +93,6 @@ reservation_object_init(struct reservation_object *obj) __seqcount_init(&obj->seq, reservation_seqcount_string, &reservation_seqcount_class); RCU_INIT_POINTER(obj->fence, NULL); RCU_INIT_POINTER(obj->fence_excl, NULL); - obj->staged = NULL; } /** @@ -124,7 +121,6 @@ reservation_object_fini(struct reservation_object *obj) kfree(fobj); } - kfree(obj->staged); ww_mutex_destroy(&obj->lock); } @@ -218,6 +214,11 @@ reservation_object_trylock(struct reservation_object *obj) static inline void reservation_object_unlock(struct reservation_object *obj) { +#ifdef CONFIG_DEBUG_MUTEXES + /* Test shared fence slot reservation */ + if (obj->fence) + obj->fence->shared_max = obj->fence->shared_count; +#endif ww_mutex_unlock(&obj->lock); } @@ -265,7 +266,8 @@ reservation_object_get_excl_rcu(struct reservation_object *obj) return fence; } -int reservation_object_reserve_shared(struct reservation_object *obj); +int reservation_object_reserve_shared(struct reservation_object *obj, + unsigned int num_fences); void reservation_object_add_shared_fence(struct reservation_object *obj, struct dma_fence *fence); diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index 9ec4c147abbc..b0674e330ef6 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -25,6 +25,7 @@ struct dma_chan; struct pxa2xx_spi_master { u16 num_chipselect; u8 enable_dma; + bool is_slave; /* DMA engine specific config */ bool (*dma_filter)(struct dma_chan *chan, void *param); diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index 69ee30456864..3fe24500c5ee 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -57,10 +57,12 @@ /** * enum spi_mem_data_dir - describes the direction of a SPI memory data * transfer from the controller perspective + * @SPI_MEM_NO_DATA: no data transferred * @SPI_MEM_DATA_IN: data coming from the SPI memory - * @SPI_MEM_DATA_OUT: data sent the SPI memory + * @SPI_MEM_DATA_OUT: data sent to the SPI memory */ enum spi_mem_data_dir { + SPI_MEM_NO_DATA, SPI_MEM_DATA_IN, SPI_MEM_DATA_OUT, }; @@ -123,6 +125,49 @@ struct spi_mem_op { } /** + * struct spi_mem_dirmap_info - Direct mapping information + * @op_tmpl: operation template that should be used by the direct mapping when + * the memory device is accessed + * @offset: absolute offset this direct mapping is pointing to + * @length: length in byte of this direct mapping + * + * These information are used by the controller specific implementation to know + * the portion of memory that is directly mapped and the spi_mem_op that should + * be used to access the device. + * A direct mapping is only valid for one direction (read or write) and this + * direction is directly encoded in the ->op_tmpl.data.dir field. + */ +struct spi_mem_dirmap_info { + struct spi_mem_op op_tmpl; + u64 offset; + u64 length; +}; + +/** + * struct spi_mem_dirmap_desc - Direct mapping descriptor + * @mem: the SPI memory device this direct mapping is attached to + * @info: information passed at direct mapping creation time + * @nodirmap: set to 1 if the SPI controller does not implement + * ->mem_ops->dirmap_create() or when this function returned an + * error. If @nodirmap is true, all spi_mem_dirmap_{read,write}() + * calls will use spi_mem_exec_op() to access the memory. This is a + * degraded mode that allows spi_mem drivers to use the same code + * no matter whether the controller supports direct mapping or not + * @priv: field pointing to controller specific data + * + * Common part of a direct mapping descriptor. This object is created by + * spi_mem_dirmap_create() and controller implementation of ->create_dirmap() + * can create/attach direct mapping resources to the descriptor in the ->priv + * field. + */ +struct spi_mem_dirmap_desc { + struct spi_mem *mem; + struct spi_mem_dirmap_info info; + unsigned int nodirmap; + void *priv; +}; + +/** * struct spi_mem - describes a SPI memory device * @spi: the underlying SPI device * @drvpriv: spi_mem_driver private data @@ -177,10 +222,32 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem) * Note that if the implementation of this function allocates memory * dynamically, then it should do so with devm_xxx(), as we don't * have a ->free_name() function. + * @dirmap_create: create a direct mapping descriptor that can later be used to + * access the memory device. This method is optional + * @dirmap_destroy: destroy a memory descriptor previous created by + * ->dirmap_create() + * @dirmap_read: read data from the memory device using the direct mapping + * created by ->dirmap_create(). The function can return less + * data than requested (for example when the request is crossing + * the currently mapped area), and the caller of + * spi_mem_dirmap_read() is responsible for calling it again in + * this case. + * @dirmap_write: write data to the memory device using the direct mapping + * created by ->dirmap_create(). The function can return less + * data than requested (for example when the request is crossing + * the currently mapped area), and the caller of + * spi_mem_dirmap_write() is responsible for calling it again in + * this case. * * This interface should be implemented by SPI controllers providing an * high-level interface to execute SPI memory operation, which is usually the * case for QSPI controllers. + * + * Note on ->dirmap_{read,write}(): drivers should avoid accessing the direct + * mapping from the CPU because doing that can stall the CPU waiting for the + * SPI mem transaction to finish, and this will make real-time maintainers + * unhappy and might make your system less reactive. Instead, drivers should + * use DMA to access this direct mapping. */ struct spi_controller_mem_ops { int (*adjust_op_size)(struct spi_mem *mem, struct spi_mem_op *op); @@ -189,6 +256,12 @@ struct spi_controller_mem_ops { int (*exec_op)(struct spi_mem *mem, const struct spi_mem_op *op); const char *(*get_name)(struct spi_mem *mem); + int (*dirmap_create)(struct spi_mem_dirmap_desc *desc); + void (*dirmap_destroy)(struct spi_mem_dirmap_desc *desc); + ssize_t (*dirmap_read)(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf); + ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf); }; /** @@ -249,6 +322,15 @@ int spi_mem_exec_op(struct spi_mem *mem, const char *spi_mem_get_name(struct spi_mem *mem); +struct spi_mem_dirmap_desc * +spi_mem_dirmap_create(struct spi_mem *mem, + const struct spi_mem_dirmap_info *info); +void spi_mem_dirmap_destroy(struct spi_mem_dirmap_desc *desc); +ssize_t spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf); +ssize_t spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, const void *buf); + int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv, struct module *owner); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 6be77fa5ab90..314d922ca607 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -154,7 +154,10 @@ struct spi_device { #define SPI_TX_QUAD 0x200 /* transmit with 4 wires */ #define SPI_RX_DUAL 0x400 /* receive with 2 wires */ #define SPI_RX_QUAD 0x800 /* receive with 4 wires */ -#define SPI_CS_WORD 0x1000 /* toggle cs after each word */ +#define SPI_CS_WORD 0x1000 /* toggle cs after each word */ +#define SPI_TX_OCTAL 0x2000 /* transmit with 8 wires */ +#define SPI_RX_OCTAL 0x4000 /* receive with 8 wires */ +#define SPI_3WIRE_HIZ 0x8000 /* high impedance turnaround */ int irq; void *controller_state; void *controller_data; diff --git a/include/linux/swap.h b/include/linux/swap.h index d8a07a4f171d..a8f6d5d89524 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -18,6 +18,8 @@ struct notifier_block; struct bio; +struct pagevec; + #define SWAP_FLAG_PREFER 0x8000 /* set if swap priority specified */ #define SWAP_FLAG_PRIO_MASK 0x7fff #define SWAP_FLAG_PRIO_SHIFT 0 @@ -369,7 +371,7 @@ static inline int node_reclaim(struct pglist_data *pgdat, gfp_t mask, #endif extern int page_evictable(struct page *page); -extern void check_move_unevictable_pages(struct page **, int nr_pages); +extern void check_move_unevictable_pages(struct pagevec *pvec); extern int kswapd_run(int nid); extern void kswapd_stop(int nid); diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 987cefa337de..786816cf4aa5 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -234,7 +234,7 @@ int __must_check sysfs_create_file_ns(struct kobject *kobj, const struct attribute *attr, const void *ns); int __must_check sysfs_create_files(struct kobject *kobj, - const struct attribute **attr); + const struct attribute * const *attr); int __must_check sysfs_chmod_file(struct kobject *kobj, const struct attribute *attr, umode_t mode); struct kernfs_node *sysfs_break_active_protection(struct kobject *kobj, @@ -243,7 +243,7 @@ void sysfs_unbreak_active_protection(struct kernfs_node *kn); void sysfs_remove_file_ns(struct kobject *kobj, const struct attribute *attr, const void *ns); bool sysfs_remove_file_self(struct kobject *kobj, const struct attribute *attr); -void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr); +void sysfs_remove_files(struct kobject *kobj, const struct attribute * const *attr); int __must_check sysfs_create_bin_file(struct kobject *kobj, const struct bin_attribute *attr); @@ -342,7 +342,7 @@ static inline int sysfs_create_file_ns(struct kobject *kobj, } static inline int sysfs_create_files(struct kobject *kobj, - const struct attribute **attr) + const struct attribute * const *attr) { return 0; } @@ -377,7 +377,7 @@ static inline bool sysfs_remove_file_self(struct kobject *kobj, } static inline void sysfs_remove_files(struct kobject *kobj, - const struct attribute **attr) + const struct attribute * const *attr) { } diff --git a/include/linux/t10-pi.h b/include/linux/t10-pi.h index b9626aa7e90c..3e2a80cc7b56 100644 --- a/include/linux/t10-pi.h +++ b/include/linux/t10-pi.h @@ -39,12 +39,13 @@ struct t10_pi_tuple { static inline u32 t10_pi_ref_tag(struct request *rq) { + unsigned int shift = ilog2(queue_logical_block_size(rq->q)); + #ifdef CONFIG_BLK_DEV_INTEGRITY - return blk_rq_pos(rq) >> - (rq->q->integrity.interval_exp - 9) & 0xffffffff; -#else - return -1U; + if (rq->q->integrity.interval_exp) + shift = rq->q->integrity.interval_exp; #endif + return blk_rq_pos(rq) >> (shift - SECTOR_SHIFT) & 0xffffffff; } extern const struct blk_integrity_profile t10_pi_type1_crc; diff --git a/include/linux/thinkpad_acpi.h b/include/linux/thinkpad_acpi.h deleted file mode 100644 index 9fb317970c01..000000000000 --- a/include/linux/thinkpad_acpi.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __THINKPAD_ACPI_H__ -#define __THINKPAD_ACPI_H__ - -/* These two functions return 0 if success, or negative error code - (e g -ENODEV if no led present) */ - -enum { - TPACPI_LED_MUTE, - TPACPI_LED_MICMUTE, - TPACPI_LED_MAX, -}; - -int tpacpi_led_set(int whichled, bool on); - -#endif |
