diff options
Diffstat (limited to 'include/linux')
39 files changed, 789 insertions, 342 deletions
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 0ddb5c02ad8b..d76a19ba2cff 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -65,6 +65,24 @@ #define ST_UART011_ABCR 0x100 /* Autobaud control register. */ #define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ +/* + * ZTE UART register offsets. This UART has a radically different address + * allocation from the ARM and ST variants, so we list all registers here. + * We assume unlisted registers do not exist. + */ +#define ZX_UART011_DR 0x04 +#define ZX_UART011_FR 0x14 +#define ZX_UART011_IBRD 0x24 +#define ZX_UART011_FBRD 0x28 +#define ZX_UART011_LCRH 0x30 +#define ZX_UART011_CR 0x34 +#define ZX_UART011_IFLS 0x38 +#define ZX_UART011_IMSC 0x40 +#define ZX_UART011_RIS 0x44 +#define ZX_UART011_MIS 0x48 +#define ZX_UART011_ICR 0x4c +#define ZX_UART011_DMACR 0x50 + #define UART011_DR_OE (1 << 11) #define UART011_DR_BE (1 << 10) #define UART011_DR_PE (1 << 9) diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index cf038431a5cc..db51a6ffb7d6 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -579,6 +579,8 @@ struct bcma_pflash { }; #ifdef CONFIG_BCMA_SFLASH +struct mtd_info; + struct bcma_sflash { bool present; u32 window; @@ -592,13 +594,9 @@ struct bcma_sflash { #endif #ifdef CONFIG_BCMA_NFLASH -struct mtd_info; - struct bcma_nflash { bool present; bool boot; /* This is the flash the SoC boots from */ - - struct mtd_info *mtd; }; #endif diff --git a/include/linux/dca.h b/include/linux/dca.h index d27a7a05718d..ad956c2e07a8 100644 --- a/include/linux/dca.h +++ b/include/linux/dca.h @@ -34,7 +34,7 @@ void dca_unregister_notify(struct notifier_block *nb); struct dca_provider { struct list_head node; - struct dca_ops *ops; + const struct dca_ops *ops; struct device *cd; int id; }; @@ -53,7 +53,8 @@ struct dca_ops { int (*dev_managed) (struct dca_provider *, struct device *); }; -struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size); +struct dca_provider *alloc_dca_provider(const struct dca_ops *ops, + int priv_size); void free_dca_provider(struct dca_provider *dca); int register_dca_provider(struct dca_provider *dca, struct device *dev); void unregister_dca_provider(struct dca_provider *dca, struct device *dev); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c47c68e535e8..16a1cad30c33 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -607,11 +607,38 @@ enum dmaengine_alignment { }; /** + * struct dma_slave_map - associates slave device and it's slave channel with + * parameter to be used by a filter function + * @devname: name of the device + * @slave: slave channel name + * @param: opaque parameter to pass to struct dma_filter.fn + */ +struct dma_slave_map { + const char *devname; + const char *slave; + void *param; +}; + +/** + * struct dma_filter - information for slave device/channel to filter_fn/param + * mapping + * @fn: filter function callback + * @mapcnt: number of slave device/channel in the map + * @map: array of channel to filter mapping data + */ +struct dma_filter { + dma_filter_fn fn; + int mapcnt; + const struct dma_slave_map *map; +}; + +/** * struct dma_device - info on the entity supplying DMA services * @chancnt: how many DMA channels are supported * @privatecnt: how many DMA channels are requested by dma_request_channel * @channels: the list of struct dma_chan * @global_node: list_head for global dma_device_list + * @filter: information for device/slave to filter function/param mapping * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability * @max_pq: maximum number of PQ sources and PQ-continue capability @@ -654,11 +681,14 @@ enum dmaengine_alignment { * paused. Returns 0 or an error code * @device_terminate_all: Aborts all transfers on a channel. Returns 0 * or an error code + * @device_synchronize: Synchronizes the termination of a transfers to the + * current context. * @device_tx_status: poll for transaction completion, the optional * txstate parameter can be supplied with a pointer to get a * struct with auxiliary transfer status information, otherwise the call * will just return a simple status code * @device_issue_pending: push pending transactions to hardware + * @descriptor_reuse: a submitted transfer can be resubmitted after completion */ struct dma_device { @@ -666,6 +696,7 @@ struct dma_device { unsigned int privatecnt; struct list_head channels; struct list_head global_node; + struct dma_filter filter; dma_cap_mask_t cap_mask; unsigned short max_xor; unsigned short max_pq; @@ -681,6 +712,7 @@ struct dma_device { u32 src_addr_widths; u32 dst_addr_widths; u32 directions; + bool descriptor_reuse; enum dma_residue_granularity residue_granularity; int (*device_alloc_chan_resources)(struct dma_chan *chan); @@ -737,6 +769,7 @@ struct dma_device { int (*device_pause)(struct dma_chan *chan); int (*device_resume)(struct dma_chan *chan); int (*device_terminate_all)(struct dma_chan *chan); + void (*device_synchronize)(struct dma_chan *chan); enum dma_status (*device_tx_status)(struct dma_chan *chan, dma_cookie_t cookie, @@ -828,6 +861,13 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_sg( src_sg, src_nents, flags); } +/** + * dmaengine_terminate_all() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * This function is DEPRECATED use either dmaengine_terminate_sync() or + * dmaengine_terminate_async() instead. + */ static inline int dmaengine_terminate_all(struct dma_chan *chan) { if (chan->device->device_terminate_all) @@ -836,6 +876,88 @@ static inline int dmaengine_terminate_all(struct dma_chan *chan) return -ENOSYS; } +/** + * dmaengine_terminate_async() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending descriptors + * that have previously been submitted to the channel. It is not guaranteed + * though that the transfer for the active descriptor has stopped when the + * function returns. Furthermore it is possible the complete callback of a + * submitted transfer is still running when this function returns. + * + * dmaengine_synchronize() needs to be called before it is safe to free + * any memory that is accessed by previously submitted descriptors or before + * freeing any resources accessed from within the completion callback of any + * perviously submitted descriptors. + * + * This function can be called from atomic context as well as from within a + * complete callback of a descriptor submitted on the same channel. + * + * If none of the two conditions above apply consider using + * dmaengine_terminate_sync() instead. + */ +static inline int dmaengine_terminate_async(struct dma_chan *chan) +{ + if (chan->device->device_terminate_all) + return chan->device->device_terminate_all(chan); + + return -EINVAL; +} + +/** + * dmaengine_synchronize() - Synchronize DMA channel termination + * @chan: The channel to synchronize + * + * Synchronizes to the DMA channel termination to the current context. When this + * function returns it is guaranteed that all transfers for previously issued + * descriptors have stopped and and it is safe to free the memory assoicated + * with them. Furthermore it is guaranteed that all complete callback functions + * for a previously submitted descriptor have finished running and it is safe to + * free resources accessed from within the complete callbacks. + * + * The behavior of this function is undefined if dma_async_issue_pending() has + * been called between dmaengine_terminate_async() and this function. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline void dmaengine_synchronize(struct dma_chan *chan) +{ + might_sleep(); + + if (chan->device->device_synchronize) + chan->device->device_synchronize(chan); +} + +/** + * dmaengine_terminate_sync() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending transfers + * that have previously been submitted to the channel. It is similar to + * dmaengine_terminate_async() but guarantees that the DMA transfer has actually + * stopped and that all complete callbacks have finished running when the + * function returns. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline int dmaengine_terminate_sync(struct dma_chan *chan) +{ + int ret; + + ret = dmaengine_terminate_async(chan); + if (ret) + return ret; + + dmaengine_synchronize(chan); + + return 0; +} + static inline int dmaengine_pause(struct dma_chan *chan) { if (chan->device->device_pause) @@ -1140,9 +1262,11 @@ enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); void dma_issue_pending_all(void); struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); -struct dma_chan *dma_request_slave_channel_reason(struct device *dev, - const char *name); struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); + +struct dma_chan *dma_request_chan(struct device *dev, const char *name); +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); + void dma_release_channel(struct dma_chan *chan); int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps); #else @@ -1166,16 +1290,21 @@ static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, { return NULL; } -static inline struct dma_chan *dma_request_slave_channel_reason( - struct device *dev, const char *name) -{ - return ERR_PTR(-ENODEV); -} static inline struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name) { return NULL; } +static inline struct dma_chan *dma_request_chan(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENODEV); +} +static inline struct dma_chan *dma_request_chan_by_mask( + const dma_cap_mask_t *mask) +{ + return ERR_PTR(-ENODEV); +} static inline void dma_release_channel(struct dma_chan *chan) { } @@ -1186,6 +1315,8 @@ static inline int dma_get_slave_caps(struct dma_chan *chan, } #endif +#define dma_request_slave_channel_reason(dev, name) dma_request_chan(dev, name) + static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx) { struct dma_slave_caps caps; diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 8fdc17b84739..753dbad0bf94 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -141,8 +141,6 @@ hv_get_ringbuffer_availbytes(struct hv_ring_buffer_info *rbi, { u32 read_loc, write_loc, dsize; - smp_read_barrier_depends(); - /* Capture the read/write indices before they changed */ read_loc = rbi->ring_buffer->read_index; write_loc = rbi->ring_buffer->write_index; @@ -630,6 +628,11 @@ struct hv_input_signal_event_buffer { struct hv_input_signal_event event; }; +enum hv_signal_policy { + HV_SIGNAL_POLICY_DEFAULT = 0, + HV_SIGNAL_POLICY_EXPLICIT, +}; + struct vmbus_channel { /* Unique channel id */ int id; @@ -757,8 +760,21 @@ struct vmbus_channel { * link up channels based on their CPU affinity. */ struct list_head percpu_list; + /* + * Host signaling policy: The default policy will be + * based on the ring buffer state. We will also support + * a policy where the client driver can have explicit + * signaling control. + */ + enum hv_signal_policy signal_policy; }; +static inline void set_channel_signal_state(struct vmbus_channel *c, + enum hv_signal_policy policy) +{ + c->signal_policy = policy; +} + static inline void set_channel_read_state(struct vmbus_channel *c, bool state) { c->batched_reading = state; @@ -983,16 +999,8 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, resource_size_t size, resource_size_t align, bool fb_overlap_ok); -/** - * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device - * - * This macro is used to create a struct hv_vmbus_device_id that matches a - * specific device. - */ -#define VMBUS_DEVICE(g0, g1, g2, g3, g4, g5, g6, g7, \ - g8, g9, ga, gb, gc, gd, ge, gf) \ - .guid = { g0, g1, g2, g3, g4, g5, g6, g7, \ - g8, g9, ga, gb, gc, gd, ge, gf }, +int vmbus_cpu_number_to_vp_number(int cpu_number); +u64 hv_do_hypercall(u64 control, void *input, void *output); /* * GUID definitions of various offer types - services offered to the guest. @@ -1003,118 +1011,102 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, * {f8615163-df3e-46c5-913f-f2d2f965ed0e} */ #define HV_NIC_GUID \ - .guid = { \ - 0x63, 0x51, 0x61, 0xf8, 0x3e, 0xdf, 0xc5, 0x46, \ - 0x91, 0x3f, 0xf2, 0xd2, 0xf9, 0x65, 0xed, 0x0e \ - } + .guid = UUID_LE(0xf8615163, 0xdf3e, 0x46c5, 0x91, 0x3f, \ + 0xf2, 0xd2, 0xf9, 0x65, 0xed, 0x0e) /* * IDE GUID * {32412632-86cb-44a2-9b5c-50d1417354f5} */ #define HV_IDE_GUID \ - .guid = { \ - 0x32, 0x26, 0x41, 0x32, 0xcb, 0x86, 0xa2, 0x44, \ - 0x9b, 0x5c, 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5 \ - } + .guid = UUID_LE(0x32412632, 0x86cb, 0x44a2, 0x9b, 0x5c, \ + 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5) /* * SCSI GUID * {ba6163d9-04a1-4d29-b605-72e2ffb1dc7f} */ #define HV_SCSI_GUID \ - .guid = { \ - 0xd9, 0x63, 0x61, 0xba, 0xa1, 0x04, 0x29, 0x4d, \ - 0xb6, 0x05, 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f \ - } + .guid = UUID_LE(0xba6163d9, 0x04a1, 0x4d29, 0xb6, 0x05, \ + 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f) /* * Shutdown GUID * {0e0b6031-5213-4934-818b-38d90ced39db} */ #define HV_SHUTDOWN_GUID \ - .guid = { \ - 0x31, 0x60, 0x0b, 0x0e, 0x13, 0x52, 0x34, 0x49, \ - 0x81, 0x8b, 0x38, 0xd9, 0x0c, 0xed, 0x39, 0xdb \ - } + .guid = UUID_LE(0x0e0b6031, 0x5213, 0x4934, 0x81, 0x8b, \ + 0x38, 0xd9, 0x0c, 0xed, 0x39, 0xdb) /* * Time Synch GUID * {9527E630-D0AE-497b-ADCE-E80AB0175CAF} */ #define HV_TS_GUID \ - .guid = { \ - 0x30, 0xe6, 0x27, 0x95, 0xae, 0xd0, 0x7b, 0x49, \ - 0xad, 0xce, 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf \ - } + .guid = UUID_LE(0x9527e630, 0xd0ae, 0x497b, 0xad, 0xce, \ + 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf) /* * Heartbeat GUID * {57164f39-9115-4e78-ab55-382f3bd5422d} */ #define HV_HEART_BEAT_GUID \ - .guid = { \ - 0x39, 0x4f, 0x16, 0x57, 0x15, 0x91, 0x78, 0x4e, \ - 0xab, 0x55, 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d \ - } + .guid = UUID_LE(0x57164f39, 0x9115, 0x4e78, 0xab, 0x55, \ + 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d) /* * KVP GUID * {a9a0f4e7-5a45-4d96-b827-8a841e8c03e6} */ #define HV_KVP_GUID \ - .guid = { \ - 0xe7, 0xf4, 0xa0, 0xa9, 0x45, 0x5a, 0x96, 0x4d, \ - 0xb8, 0x27, 0x8a, 0x84, 0x1e, 0x8c, 0x3, 0xe6 \ - } + .guid = UUID_LE(0xa9a0f4e7, 0x5a45, 0x4d96, 0xb8, 0x27, \ + 0x8a, 0x84, 0x1e, 0x8c, 0x03, 0xe6) /* * Dynamic memory GUID * {525074dc-8985-46e2-8057-a307dc18a502} */ #define HV_DM_GUID \ - .guid = { \ - 0xdc, 0x74, 0x50, 0X52, 0x85, 0x89, 0xe2, 0x46, \ - 0x80, 0x57, 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02 \ - } + .guid = UUID_LE(0x525074dc, 0x8985, 0x46e2, 0x80, 0x57, \ + 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02) /* * Mouse GUID * {cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a} */ #define HV_MOUSE_GUID \ - .guid = { \ - 0x9e, 0xb6, 0xa8, 0xcf, 0x4a, 0x5b, 0xc0, 0x4c, \ - 0xb9, 0x8b, 0x8b, 0xa1, 0xa1, 0xf3, 0xf9, 0x5a \ - } + .guid = UUID_LE(0xcfa8b69e, 0x5b4a, 0x4cc0, 0xb9, 0x8b, \ + 0x8b, 0xa1, 0xa1, 0xf3, 0xf9, 0x5a) + +/* + * Keyboard GUID + * {f912ad6d-2b17-48ea-bd65-f927a61c7684} + */ +#define HV_KBD_GUID \ + .guid = UUID_LE(0xf912ad6d, 0x2b17, 0x48ea, 0xbd, 0x65, \ + 0xf9, 0x27, 0xa6, 0x1c, 0x76, 0x84) /* * VSS (Backup/Restore) GUID */ #define HV_VSS_GUID \ - .guid = { \ - 0x29, 0x2e, 0xfa, 0x35, 0x23, 0xea, 0x36, 0x42, \ - 0x96, 0xae, 0x3a, 0x6e, 0xba, 0xcb, 0xa4, 0x40 \ - } + .guid = UUID_LE(0x35fa2e29, 0xea23, 0x4236, 0x96, 0xae, \ + 0x3a, 0x6e, 0xba, 0xcb, 0xa4, 0x40) /* * Synthetic Video GUID * {DA0A7802-E377-4aac-8E77-0558EB1073F8} */ #define HV_SYNTHVID_GUID \ - .guid = { \ - 0x02, 0x78, 0x0a, 0xda, 0x77, 0xe3, 0xac, 0x4a, \ - 0x8e, 0x77, 0x05, 0x58, 0xeb, 0x10, 0x73, 0xf8 \ - } + .guid = UUID_LE(0xda0a7802, 0xe377, 0x4aac, 0x8e, 0x77, \ + 0x05, 0x58, 0xeb, 0x10, 0x73, 0xf8) /* * Synthetic FC GUID * {2f9bcc4a-0069-4af3-b76b-6fd0be528cda} */ #define HV_SYNTHFC_GUID \ - .guid = { \ - 0x4A, 0xCC, 0x9B, 0x2F, 0x69, 0x00, 0xF3, 0x4A, \ - 0xB7, 0x6B, 0x6F, 0xD0, 0xBE, 0x52, 0x8C, 0xDA \ - } + .guid = UUID_LE(0x2f9bcc4a, 0x0069, 0x4af3, 0xb7, 0x6b, \ + 0x6f, 0xd0, 0xbe, 0x52, 0x8c, 0xda) /* * Guest File Copy Service @@ -1122,20 +1114,25 @@ int vmbus_allocate_mmio(struct resource **new, struct hv_device *device_obj, */ #define HV_FCOPY_GUID \ - .guid = { \ - 0xE3, 0x4B, 0xD1, 0x34, 0xE4, 0xDE, 0xC8, 0x41, \ - 0x9A, 0xE7, 0x6B, 0x17, 0x49, 0x77, 0xC1, 0x92 \ - } + .guid = UUID_LE(0x34d14be3, 0xdee4, 0x41c8, 0x9a, 0xe7, \ + 0x6b, 0x17, 0x49, 0x77, 0xc1, 0x92) /* * NetworkDirect. This is the guest RDMA service. * {8c2eaf3d-32a7-4b09-ab99-bd1f1c86b501} */ #define HV_ND_GUID \ - .guid = { \ - 0x3d, 0xaf, 0x2e, 0x8c, 0xa7, 0x32, 0x09, 0x4b, \ - 0xab, 0x99, 0xbd, 0x1f, 0x1c, 0x86, 0xb5, 0x01 \ - } + .guid = UUID_LE(0x8c2eaf3d, 0x32a7, 0x4b09, 0xab, 0x99, \ + 0xbd, 0x1f, 0x1c, 0x86, 0xb5, 0x01) + +/* + * PCI Express Pass Through + * {44C4F61D-4444-4400-9D52-802E27EDE19F} + */ + +#define HV_PCIE_GUID \ + .guid = UUID_LE(0x44c4f61d, 0x4444, 0x4400, 0x9d, 0x52, \ + 0x80, 0x2e, 0x27, 0xed, 0xe1, 0x9f) /* * Common header for Hyper-V ICs diff --git a/include/linux/iio/buffer-dma.h b/include/linux/iio/buffer-dma.h new file mode 100644 index 000000000000..767467d886de --- /dev/null +++ b/include/linux/iio/buffer-dma.h @@ -0,0 +1,152 @@ +/* + * Copyright 2013-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ + +#ifndef __INDUSTRIALIO_DMA_BUFFER_H__ +#define __INDUSTRIALIO_DMA_BUFFER_H__ + +#include <linux/list.h> +#include <linux/kref.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/iio/buffer.h> + +struct iio_dma_buffer_queue; +struct iio_dma_buffer_ops; +struct device; + +struct iio_buffer_block { + u32 size; + u32 bytes_used; +}; + +/** + * enum iio_block_state - State of a struct iio_dma_buffer_block + * @IIO_BLOCK_STATE_DEQUEUED: Block is not queued + * @IIO_BLOCK_STATE_QUEUED: Block is on the incoming queue + * @IIO_BLOCK_STATE_ACTIVE: Block is currently being processed by the DMA + * @IIO_BLOCK_STATE_DONE: Block is on the outgoing queue + * @IIO_BLOCK_STATE_DEAD: Block has been marked as to be freed + */ +enum iio_block_state { + IIO_BLOCK_STATE_DEQUEUED, + IIO_BLOCK_STATE_QUEUED, + IIO_BLOCK_STATE_ACTIVE, + IIO_BLOCK_STATE_DONE, + IIO_BLOCK_STATE_DEAD, +}; + +/** + * struct iio_dma_buffer_block - IIO buffer block + * @head: List head + * @size: Total size of the block in bytes + * @bytes_used: Number of bytes that contain valid data + * @vaddr: Virutal address of the blocks memory + * @phys_addr: Physical address of the blocks memory + * @queue: Parent DMA buffer queue + * @kref: kref used to manage the lifetime of block + * @state: Current state of the block + */ +struct iio_dma_buffer_block { + /* May only be accessed by the owner of the block */ + struct list_head head; + size_t bytes_used; + + /* + * Set during allocation, constant thereafter. May be accessed read-only + * by anybody holding a reference to the block. + */ + void *vaddr; + dma_addr_t phys_addr; + size_t size; + struct iio_dma_buffer_queue *queue; + + /* Must not be accessed outside the core. */ + struct kref kref; + /* + * Must not be accessed outside the core. Access needs to hold + * queue->list_lock if the block is not owned by the core. + */ + enum iio_block_state state; +}; + +/** + * struct iio_dma_buffer_queue_fileio - FileIO state for the DMA buffer + * @blocks: Buffer blocks used for fileio + * @active_block: Block being used in read() + * @pos: Read offset in the active block + * @block_size: Size of each block + */ +struct iio_dma_buffer_queue_fileio { + struct iio_dma_buffer_block *blocks[2]; + struct iio_dma_buffer_block *active_block; + size_t pos; + size_t block_size; +}; + +/** + * struct iio_dma_buffer_queue - DMA buffer base structure + * @buffer: IIO buffer base structure + * @dev: Parent device + * @ops: DMA buffer callbacks + * @lock: Protects the incoming list, active and the fields in the fileio + * substruct + * @list_lock: Protects lists that contain blocks which can be modified in + * atomic context as well as blocks on those lists. This is the outgoing queue + * list and typically also a list of active blocks in the part that handles + * the DMA controller + * @incoming: List of buffers on the incoming queue + * @outgoing: List of buffers on the outgoing queue + * @active: Whether the buffer is currently active + * @fileio: FileIO state + */ +struct iio_dma_buffer_queue { + struct iio_buffer buffer; + struct device *dev; + const struct iio_dma_buffer_ops *ops; + + struct mutex lock; + spinlock_t list_lock; + struct list_head incoming; + struct list_head outgoing; + + bool active; + + struct iio_dma_buffer_queue_fileio fileio; +}; + +/** + * struct iio_dma_buffer_ops - DMA buffer callback operations + * @submit: Called when a block is submitted to the DMA controller + * @abort: Should abort all pending transfers + */ +struct iio_dma_buffer_ops { + int (*submit)(struct iio_dma_buffer_queue *queue, + struct iio_dma_buffer_block *block); + void (*abort)(struct iio_dma_buffer_queue *queue); +}; + +void iio_dma_buffer_block_done(struct iio_dma_buffer_block *block); +void iio_dma_buffer_block_list_abort(struct iio_dma_buffer_queue *queue, + struct list_head *list); + +int iio_dma_buffer_enable(struct iio_buffer *buffer, + struct iio_dev *indio_dev); +int iio_dma_buffer_disable(struct iio_buffer *buffer, + struct iio_dev *indio_dev); +int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, + char __user *user_buffer); +size_t iio_dma_buffer_data_available(struct iio_buffer *buffer); +int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd); +int iio_dma_buffer_set_length(struct iio_buffer *buffer, int length); +int iio_dma_buffer_request_update(struct iio_buffer *buffer); + +int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, + struct device *dma_dev, const struct iio_dma_buffer_ops *ops); +void iio_dma_buffer_exit(struct iio_dma_buffer_queue *queue); +void iio_dma_buffer_release(struct iio_dma_buffer_queue *queue); + +#endif diff --git a/include/linux/iio/buffer-dmaengine.h b/include/linux/iio/buffer-dmaengine.h new file mode 100644 index 000000000000..5dcddf427bb0 --- /dev/null +++ b/include/linux/iio/buffer-dmaengine.h @@ -0,0 +1,18 @@ +/* + * Copyright 2014-2015 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __IIO_DMAENGINE_H__ +#define __IIO_DMAENGINE_H__ + +struct iio_buffer; +struct device; + +struct iio_buffer *iio_dmaengine_buffer_alloc(struct device *dev, + const char *channel); +void iio_dmaengine_buffer_free(struct iio_buffer *buffer); + +#endif diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index 1600c55828e0..2ec3ad58e8a0 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -18,6 +18,12 @@ struct iio_buffer; /** + * INDIO_BUFFER_FLAG_FIXED_WATERMARK - Watermark level of the buffer can not be + * configured. It has a fixed value which will be buffer specific. + */ +#define INDIO_BUFFER_FLAG_FIXED_WATERMARK BIT(0) + +/** * struct iio_buffer_access_funcs - access functions for buffers. * @store_to: actually store stuff to the buffer * @read_first_n: try to get a specified number of bytes (must exist) @@ -27,9 +33,15 @@ struct iio_buffer; * storage. * @set_bytes_per_datum:set number of bytes per datum * @set_length: set number of datums in buffer + * @enable: called if the buffer is attached to a device and the + * device starts sampling. Calls are balanced with + * @disable. + * @disable: called if the buffer is attached to a device and the + * device stops sampling. Calles are balanced with @enable. * @release: called when the last reference to the buffer is dropped, * should free all resources allocated by the buffer. * @modes: Supported operating modes by this buffer type + * @flags: A bitmask combination of INDIO_BUFFER_FLAG_* * * The purpose of this structure is to make the buffer element * modular as event for a given driver, different usecases may require @@ -51,9 +63,13 @@ struct iio_buffer_access_funcs { int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd); int (*set_length)(struct iio_buffer *buffer, int length); + int (*enable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); + int (*disable)(struct iio_buffer *buffer, struct iio_dev *indio_dev); + void (*release)(struct iio_buffer *buffer); unsigned int modes; + unsigned int flags; }; /** diff --git a/include/linux/iio/configfs.h b/include/linux/iio/configfs.h new file mode 100644 index 000000000000..93befd67c15c --- /dev/null +++ b/include/linux/iio/configfs.h @@ -0,0 +1,15 @@ +/* + * Industrial I/O configfs support + * + * Copyright (c) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __IIO_CONFIGFS +#define __IIO_CONFIGFS + +extern struct configfs_subsystem iio_configfs_subsys; + +#endif /* __IIO_CONFIGFS */ diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index 19c94c9acc81..b5894118755f 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -636,6 +636,8 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) } #endif +ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals); + int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, int *fract); diff --git a/include/linux/iio/sw_trigger.h b/include/linux/iio/sw_trigger.h new file mode 100644 index 000000000000..5198f8ed08a4 --- /dev/null +++ b/include/linux/iio/sw_trigger.h @@ -0,0 +1,70 @@ +/* + * Industrial I/O software trigger interface + * + * Copyright (c) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __IIO_SW_TRIGGER +#define __IIO_SW_TRIGGER + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/iio/iio.h> +#include <linux/configfs.h> + +#define module_iio_sw_trigger_driver(__iio_sw_trigger_type) \ + module_driver(__iio_sw_trigger_type, iio_register_sw_trigger_type, \ + iio_unregister_sw_trigger_type) + +struct iio_sw_trigger_ops; + +struct iio_sw_trigger_type { + const char *name; + struct module *owner; + const struct iio_sw_trigger_ops *ops; + struct list_head list; + struct config_group *group; +}; + +struct iio_sw_trigger { + struct iio_trigger *trigger; + struct iio_sw_trigger_type *trigger_type; + struct config_group group; +}; + +struct iio_sw_trigger_ops { + struct iio_sw_trigger* (*probe)(const char *); + int (*remove)(struct iio_sw_trigger *); +}; + +static inline +struct iio_sw_trigger *to_iio_sw_trigger(struct config_item *item) +{ + return container_of(to_config_group(item), struct iio_sw_trigger, + group); +} + +int iio_register_sw_trigger_type(struct iio_sw_trigger_type *tt); +void iio_unregister_sw_trigger_type(struct iio_sw_trigger_type *tt); + +struct iio_sw_trigger *iio_sw_trigger_create(const char *, const char *); +void iio_sw_trigger_destroy(struct iio_sw_trigger *); + +int iio_sw_trigger_type_configfs_register(struct iio_sw_trigger_type *tt); +void iio_sw_trigger_type_configfs_unregister(struct iio_sw_trigger_type *tt); + +static inline +void iio_swt_group_init_type_name(struct iio_sw_trigger *t, + const char *name, + struct config_item_type *type) +{ +#ifdef CONFIG_CONFIGFS_FS + config_group_init_type_name(&t->group, name, type); +#endif +} + +#endif /* __IIO_SW_TRIGGER */ diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h index 13e1d96935ed..c800dbc42079 100644 --- a/include/linux/mfd/palmas.h +++ b/include/linux/mfd/palmas.h @@ -134,21 +134,32 @@ struct palmas_pmic_driver_data { struct regulator_config config); }; +struct palmas_adc_wakeup_property { + int adc_channel_number; + int adc_high_threshold; + int adc_low_threshold; +}; + struct palmas_gpadc_platform_data { /* Channel 3 current source is only enabled during conversion */ - int ch3_current; + int ch3_current; /* 0: off; 1: 10uA; 2: 400uA; 3: 800 uA */ /* Channel 0 current source can be used for battery detection. * If used for battery detection this will cause a permanent current * consumption depending on current level set here. */ - int ch0_current; + int ch0_current; /* 0: off; 1: 5uA; 2: 15uA; 3: 20 uA */ + bool extended_delay; /* use extended delay for conversion */ /* default BAT_REMOVAL_DAT setting on device probe */ int bat_removal; /* Sets the START_POLARITY bit in the RT_CTRL register */ int start_polarity; + + int auto_conversion_period_ms; + struct palmas_adc_wakeup_property *adc_wakeup1_data; + struct palmas_adc_wakeup_property *adc_wakeup2_data; }; struct palmas_reg_init { @@ -405,28 +416,7 @@ struct palmas_gpadc_calibration { s32 offset_error; }; -struct palmas_gpadc { - struct device *dev; - struct palmas *palmas; - - int ch3_current; - int ch0_current; - - int gpadc_force; - - int bat_removal; - - struct mutex reading_lock; - struct completion irq_complete; - - int eoc_sw_irq; - - struct palmas_gpadc_calibration *palmas_cal_tbl; - - int conv0_channel; - int conv1_channel; - int rt_channel; -}; +#define PALMAS_DATASHEET_NAME(_name) "palmas-gpadc-chan-"#_name struct palmas_gpadc_result { s32 raw_code; @@ -520,6 +510,43 @@ enum palmas_irqs { PALMAS_NUM_IRQ, }; +/* Palmas GPADC Channels */ +enum { + PALMAS_ADC_CH_IN0, + PALMAS_ADC_CH_IN1, + PALMAS_ADC_CH_IN2, + PALMAS_ADC_CH_IN3, + PALMAS_ADC_CH_IN4, + PALMAS_ADC_CH_IN5, + PALMAS_ADC_CH_IN6, + PALMAS_ADC_CH_IN7, + PALMAS_ADC_CH_IN8, + PALMAS_ADC_CH_IN9, + PALMAS_ADC_CH_IN10, + PALMAS_ADC_CH_IN11, + PALMAS_ADC_CH_IN12, + PALMAS_ADC_CH_IN13, + PALMAS_ADC_CH_IN14, + PALMAS_ADC_CH_IN15, + PALMAS_ADC_CH_MAX, +}; + +/* Palmas GPADC Channel0 Current Source */ +enum { + PALMAS_ADC_CH0_CURRENT_SRC_0, + PALMAS_ADC_CH0_CURRENT_SRC_5, + PALMAS_ADC_CH0_CURRENT_SRC_15, + PALMAS_ADC_CH0_CURRENT_SRC_20, +}; + +/* Palmas GPADC Channel3 Current Source */ +enum { + PALMAS_ADC_CH3_CURRENT_SRC_0, + PALMAS_ADC_CH3_CURRENT_SRC_10, + PALMAS_ADC_CH3_CURRENT_SRC_400, + PALMAS_ADC_CH3_CURRENT_SRC_800, +}; + struct palmas_pmic { struct palmas *palmas; struct device *dev; diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 64f36e09a790..6e4c645e1c0d 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -404,7 +404,7 @@ struct virtio_device_id { * For Hyper-V devices we use the device guid as the id. */ struct hv_vmbus_device_id { - __u8 guid[16]; + uuid_le guid; kernel_ulong_t driver_data; /* Data private to the driver */ }; diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 366cf77953b5..58f3ba709ade 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -142,7 +142,9 @@ #endif #ifndef map_bankwidth +#ifdef CONFIG_MTD #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" +#endif static inline int map_bankwidth(void *map) { BUG(); diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index f17fa75809aa..cc84923011c0 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -254,6 +254,17 @@ struct mtd_info { int usecount; }; +static inline void mtd_set_of_node(struct mtd_info *mtd, + struct device_node *np) +{ + mtd->dev.of_node = np; +} + +static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd) +{ + return mtd->dev.of_node; +} + int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, void **virt, resource_size_t *phys); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 5a9d1d4c2487..bdd68e22b5a5 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -129,6 +129,14 @@ typedef enum { /* Enable Hardware ECC before syndrome is read back from flash */ #define NAND_ECC_READSYN 2 +/* + * Enable generic NAND 'page erased' check. This check is only done when + * ecc.correct() returns -EBADMSG. + * Set this flag if your implementation does not fix bitflips in erased + * pages and you want to rely on the default implementation. + */ +#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0) + /* Bit mask for flags passed to do_nand_read_ecc */ #define NAND_GET_DEVICE 0x80 @@ -276,15 +284,15 @@ struct nand_onfi_params { __le16 t_r; __le16 t_ccs; __le16 src_sync_timing_mode; - __le16 src_ssync_features; + u8 src_ssync_features; __le16 clk_pin_capacitance_typ; __le16 io_pin_capacitance_typ; __le16 input_pin_capacitance_typ; u8 input_pin_capacitance_max; u8 driver_strength_support; __le16 t_int_r; - __le16 t_ald; - u8 reserved4[7]; + __le16 t_adl; + u8 reserved4[8]; /* vendor */ __le16 vendor_revision; @@ -407,7 +415,7 @@ struct nand_jedec_params { __le16 input_pin_capacitance_typ; __le16 clk_pin_capacitance_typ; u8 driver_strength_support; - __le16 t_ald; + __le16 t_adl; u8 reserved4[36]; /* ECC and endurance block */ @@ -451,12 +459,19 @@ struct nand_hw_control { * @total: total number of ECC bytes per page * @prepad: padding information for syndrome based ECC generators * @postpad: padding information for syndrome based ECC generators + * @options: ECC specific options (see NAND_ECC_XXX flags defined above) * @layout: ECC layout control struct pointer * @priv: pointer to private ECC control data * @hwctl: function to control hardware ECC generator. Must only * be provided if an hardware ECC is available * @calculate: function for ECC calculation or readback from ECC hardware - * @correct: function for ECC correction, matching to ECC generator (sw/hw) + * @correct: function for ECC correction, matching to ECC generator (sw/hw). + * Should return a positive number representing the number of + * corrected bitflips, -EBADMSG if the number of bitflips exceed + * ECC strength, or any other error code if the error is not + * directly related to correction. + * If -EBADMSG is returned the input buffers should be left + * untouched. * @read_page_raw: function to read a raw page without ECC. This function * should hide the specific layout used by the ECC * controller and always return contiguous in-band and @@ -494,6 +509,7 @@ struct nand_ecc_ctrl { int strength; int prepad; int postpad; + unsigned int options; struct nand_ecclayout *layout; void *priv; void (*hwctl)(struct mtd_info *mtd, int mode); @@ -540,11 +556,11 @@ struct nand_buffers { /** * struct nand_chip - NAND Private Flash Chip Data + * @mtd: MTD device registered to the MTD framework * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the * flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the * flash device. - * @flash_node: [BOARDSPECIFIC] device node describing this instance * @read_byte: [REPLACEABLE] read one byte from the chip * @read_word: [REPLACEABLE] read one word from the chip * @write_byte: [REPLACEABLE] write a single byte to the chip on the @@ -640,11 +656,10 @@ struct nand_buffers { */ struct nand_chip { + struct mtd_info mtd; void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; - struct device_node *flash_node; - uint8_t (*read_byte)(struct mtd_info *mtd); u16 (*read_word)(struct mtd_info *mtd); void (*write_byte)(struct mtd_info *mtd, uint8_t byte); @@ -719,6 +734,37 @@ struct nand_chip { void *priv; }; +static inline void nand_set_flash_node(struct nand_chip *chip, + struct device_node *np) +{ + mtd_set_of_node(&chip->mtd, np); +} + +static inline struct device_node *nand_get_flash_node(struct nand_chip *chip) +{ + return mtd_get_of_node(&chip->mtd); +} + +static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd) +{ + return container_of(mtd, struct nand_chip, mtd); +} + +static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip) +{ + return &chip->mtd; +} + +static inline void *nand_get_controller_data(struct nand_chip *chip) +{ + return chip->priv; +} + +static inline void nand_set_controller_data(struct nand_chip *chip, void *priv) +{ + chip->priv = priv; +} + /* * NAND Flash Manufacturer ID Codes */ @@ -907,15 +953,6 @@ struct platform_nand_data { struct platform_nand_ctrl ctrl; }; -/* Some helpers to access the data structures */ -static inline -struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd->priv; - - return chip->priv; -} - /* return the supported features. */ static inline int onfi_feature(struct nand_chip *chip) { diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h index 74acf5367556..fb0bc3420a10 100644 --- a/include/linux/mtd/nand_bch.h +++ b/include/linux/mtd/nand_bch.h @@ -55,7 +55,7 @@ static inline int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf, unsigned char *read_ecc, unsigned char *calc_ecc) { - return -1; + return -ENOTSUPP; } static inline struct nand_bch_control * diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 6a35e6de5da1..70736e1e6c8f 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -41,7 +41,6 @@ struct mtd_partition { uint64_t size; /* partition size */ uint64_t offset; /* offset within the master MTD space */ uint32_t mask_flags; /* master MTD flags to mask out for this partition */ - struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only) */ }; #define MTDPART_OFS_RETAIN (-3) @@ -56,11 +55,9 @@ struct device_node; /** * struct mtd_part_parser_data - used to pass data to MTD partition parsers. * @origin: for RedBoot, start address of MTD device - * @of_node: for OF parsers, device node containing partitioning information */ struct mtd_part_parser_data { unsigned long origin; - struct device_node *of_node; }; @@ -72,13 +69,33 @@ struct mtd_part_parser { struct list_head list; struct module *owner; const char *name; - int (*parse_fn)(struct mtd_info *, struct mtd_partition **, + int (*parse_fn)(struct mtd_info *, const struct mtd_partition **, struct mtd_part_parser_data *); + void (*cleanup)(const struct mtd_partition *pparts, int nr_parts); }; -extern void register_mtd_parser(struct mtd_part_parser *parser); +/* Container for passing around a set of parsed partitions */ +struct mtd_partitions { + const struct mtd_partition *parts; + int nr_parts; + const struct mtd_part_parser *parser; +}; + +extern int __register_mtd_parser(struct mtd_part_parser *parser, + struct module *owner); +#define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE) + extern void deregister_mtd_parser(struct mtd_part_parser *parser); +/* + * module_mtd_part_parser() - Helper macro for MTD partition parsers that don't + * do anything special in module init/exit. Each driver may only use this macro + * once, and calling it replaces module_init() and module_exit(). + */ +#define module_mtd_part_parser(__mtd_part_parser) \ + module_driver(__mtd_part_parser, register_mtd_parser, \ + deregister_mtd_parser) + int mtd_is_partition(const struct mtd_info *mtd); int mtd_add_partition(struct mtd_info *master, const char *name, long long offset, long long length); diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 1c28f8879b1c..2251add65fa7 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -143,11 +143,11 @@ enum flctl_ecc_res_t { struct dma_chan; struct sh_flctl { - struct mtd_info mtd; struct nand_chip chip; struct platform_device *pdev; struct dev_pm_qos_request pm_qos; void __iomem *reg; + resource_size_t fifo; uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ int read_bytes; @@ -186,7 +186,7 @@ struct sh_flctl_platform_data { static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) { - return container_of(mtdinfo, struct sh_flctl, mtd); + return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip); } #endif /* __SH_FLCTL_H__ */ diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index bc742dac7d3a..62356d50815b 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -12,6 +12,7 @@ #include <linux/bitops.h> #include <linux/mtd/cfi.h> +#include <linux/mtd/mtd.h> /* * Manufacturer IDs @@ -117,14 +118,11 @@ enum spi_nor_option_flags { SNOR_F_USE_FSR = BIT(0), }; -struct mtd_info; - /** * struct spi_nor - Structure for defining a the SPI NOR layer * @mtd: point to a mtd_info structure * @lock: the lock for the read/write/erase/lock/unlock operations * @dev: point to a spi device, or a spi nor controller device. - * @flash_node: point to a device node describing this flash instance. * @page_size: the page size of the SPI NOR * @addr_width: number of address bytes * @erase_opcode: the opcode for erasing a sector @@ -144,7 +142,8 @@ struct mtd_info; * @read: [DRIVER-SPECIFIC] read data from the SPI NOR * @write: [DRIVER-SPECIFIC] write data to the SPI NOR * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR - * at the offset @offs + * at the offset @offs; if not provided by the driver, + * spi-nor will send the erase opcode via write_reg() * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is @@ -155,7 +154,6 @@ struct spi_nor { struct mtd_info mtd; struct mutex lock; struct device *dev; - struct device_node *flash_node; u32 page_size; u8 addr_width; u8 erase_opcode; @@ -185,6 +183,17 @@ struct spi_nor { void *priv; }; +static inline void spi_nor_set_flash_node(struct spi_nor *nor, + struct device_node *np) +{ + mtd_set_of_node(&nor->mtd, np); +} + +static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) +{ + return mtd_get_of_node(&nor->mtd); +} + /** * spi_nor_scan() - scan the SPI NOR * @nor: the spi_nor structure diff --git a/include/linux/nwpserial.h b/include/linux/nwpserial.h deleted file mode 100644 index 9acb21572eaf..000000000000 --- a/include/linux/nwpserial.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Serial Port driver for a NWP uart device - * - * Copyright (C) 2008 IBM Corp., Benjamin Krill <ben@codiert.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ -#ifndef _NWPSERIAL_H -#define _NWPSERIAL_H - -int nwpserial_register_port(struct uart_port *port); -void nwpserial_unregister_port(int line); - -#endif /* _NWPSERIAL_H */ diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h index 88fa8af2b937..1d99b61adc65 100644 --- a/include/linux/omap-dma.h +++ b/include/linux/omap-dma.h @@ -267,6 +267,9 @@ struct omap_dma_reg { u8 type; }; +#define SDMA_FILTER_PARAM(hw_req) ((int[]) { (hw_req) }) +struct dma_slave_map; + /* System DMA platform data structure */ struct omap_system_dma_plat_info { const struct omap_dma_reg *reg_map; @@ -278,6 +281,9 @@ struct omap_system_dma_plat_info { void (*clear_dma)(int lch); void (*dma_write)(u32 val, int reg, int lch); u32 (*dma_read)(int reg, int lch); + + const struct dma_slave_map *slave_map; + int slavecnt; }; #ifdef CONFIG_ARCH_OMAP2PLUS diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h index dc2c541a619b..2e5fb870efa9 100644 --- a/include/linux/phy/omap_usb.h +++ b/include/linux/phy/omap_usb.h @@ -30,6 +30,12 @@ struct usb_dpll_params { u32 mf; }; +enum omap_usb_phy_type { + TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ + TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */ + TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ +}; + struct omap_usb { struct usb_phy phy; struct phy_companion *comparator; @@ -40,11 +46,20 @@ struct omap_usb { struct clk *wkupclk; struct clk *optclk; u8 flags; + enum omap_usb_phy_type type; + struct regmap *syscon_phy_power; /* ctrl. reg. acces */ + unsigned int power_reg; /* power reg. index within syscon */ + u32 mask; + u32 power_on; + u32 power_off; }; struct usb_phy_data { const char *label; u8 flags; + u32 mask; + u32 power_on; + u32 power_off; }; /* Driver Flags */ @@ -52,6 +67,14 @@ struct usb_phy_data { #define OMAP_USB2_HAS_SET_VBUS (1 << 1) #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2) +#define OMAP_DEV_PHY_PD BIT(0) +#define OMAP_USB2_PHY_PD BIT(28) + +#define AM437X_USB2_PHY_PD BIT(0) +#define AM437X_USB2_OTG_PD BIT(1) +#define AM437X_USB2_OTGVDET_EN BIT(19) +#define AM437X_USB2_OTGSESSEND_EN BIT(20) + #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) diff --git a/include/linux/platform_data/dma-rcar-hpbdma.h b/include/linux/platform_data/dma-rcar-hpbdma.h deleted file mode 100644 index 648b8ea61a22..000000000000 --- a/include/linux/platform_data/dma-rcar-hpbdma.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2011-2013 Renesas Electronics Corporation - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - */ - -#ifndef __DMA_RCAR_HPBDMA_H -#define __DMA_RCAR_HPBDMA_H - -#include <linux/bitops.h> -#include <linux/types.h> - -/* Transmit sizes and respective register values */ -enum { - XMIT_SZ_8BIT = 0, - XMIT_SZ_16BIT = 1, - XMIT_SZ_32BIT = 2, - XMIT_SZ_MAX -}; - -/* DMA control register (DCR) bits */ -#define HPB_DMAE_DCR_DTAMD (1u << 26) -#define HPB_DMAE_DCR_DTAC (1u << 25) -#define HPB_DMAE_DCR_DTAU (1u << 24) -#define HPB_DMAE_DCR_DTAU1 (1u << 23) -#define HPB_DMAE_DCR_SWMD (1u << 22) -#define HPB_DMAE_DCR_BTMD (1u << 21) -#define HPB_DMAE_DCR_PKMD (1u << 20) -#define HPB_DMAE_DCR_CT (1u << 18) -#define HPB_DMAE_DCR_ACMD (1u << 17) -#define HPB_DMAE_DCR_DIP (1u << 16) -#define HPB_DMAE_DCR_SMDL (1u << 13) -#define HPB_DMAE_DCR_SPDAM (1u << 12) -#define HPB_DMAE_DCR_SDRMD_MASK (3u << 10) -#define HPB_DMAE_DCR_SDRMD_MOD (0u << 10) -#define HPB_DMAE_DCR_SDRMD_AUTO (1u << 10) -#define HPB_DMAE_DCR_SDRMD_TIMER (2u << 10) -#define HPB_DMAE_DCR_SPDS_MASK (3u << 8) -#define HPB_DMAE_DCR_SPDS_8BIT (0u << 8) -#define HPB_DMAE_DCR_SPDS_16BIT (1u << 8) -#define HPB_DMAE_DCR_SPDS_32BIT (2u << 8) -#define HPB_DMAE_DCR_DMDL (1u << 5) -#define HPB_DMAE_DCR_DPDAM (1u << 4) -#define HPB_DMAE_DCR_DDRMD_MASK (3u << 2) -#define HPB_DMAE_DCR_DDRMD_MOD (0u << 2) -#define HPB_DMAE_DCR_DDRMD_AUTO (1u << 2) -#define HPB_DMAE_DCR_DDRMD_TIMER (2u << 2) -#define HPB_DMAE_DCR_DPDS_MASK (3u << 0) -#define HPB_DMAE_DCR_DPDS_8BIT (0u << 0) -#define HPB_DMAE_DCR_DPDS_16BIT (1u << 0) -#define HPB_DMAE_DCR_DPDS_32BIT (2u << 0) - -/* Asynchronous reset register (ASYNCRSTR) bits */ -#define HPB_DMAE_ASYNCRSTR_ASRST41 BIT(10) -#define HPB_DMAE_ASYNCRSTR_ASRST40 BIT(9) -#define HPB_DMAE_ASYNCRSTR_ASRST39 BIT(8) -#define HPB_DMAE_ASYNCRSTR_ASRST27 BIT(7) -#define HPB_DMAE_ASYNCRSTR_ASRST26 BIT(6) -#define HPB_DMAE_ASYNCRSTR_ASRST25 BIT(5) -#define HPB_DMAE_ASYNCRSTR_ASRST24 BIT(4) -#define HPB_DMAE_ASYNCRSTR_ASRST23 BIT(3) -#define HPB_DMAE_ASYNCRSTR_ASRST22 BIT(2) -#define HPB_DMAE_ASYNCRSTR_ASRST21 BIT(1) -#define HPB_DMAE_ASYNCRSTR_ASRST20 BIT(0) - -struct hpb_dmae_slave_config { - unsigned int id; - dma_addr_t addr; - u32 dcr; - u32 port; - u32 rstr; - u32 mdr; - u32 mdm; - u32 flags; -#define HPB_DMAE_SET_ASYNC_RESET BIT(0) -#define HPB_DMAE_SET_ASYNC_MODE BIT(1) - u32 dma_ch; -}; - -#define HPB_DMAE_CHANNEL(_irq, _s_id) \ -{ \ - .ch_irq = _irq, \ - .s_id = _s_id, \ -} - -struct hpb_dmae_channel { - unsigned int ch_irq; - unsigned int s_id; -}; - -struct hpb_dmae_pdata { - const struct hpb_dmae_slave_config *slaves; - int num_slaves; - const struct hpb_dmae_channel *channels; - int num_channels; - const unsigned int ts_shift[XMIT_SZ_MAX]; - int num_hw_channels; -}; - -#endif diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index 4299f4ba03bd..0a533f94438f 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -53,12 +53,16 @@ enum dma_event_q { #define EDMA_CTLR(i) ((i) >> 16) #define EDMA_CHAN_SLOT(i) ((i) & 0xffff) +#define EDMA_FILTER_PARAM(ctlr, chan) ((int[]) { EDMA_CTLR_CHAN(ctlr, chan) }) + struct edma_rsv_info { const s16 (*rsv_chans)[2]; const s16 (*rsv_slots)[2]; }; +struct dma_slave_map; + /* platform_data for EDMA driver */ struct edma_soc_info { /* @@ -76,6 +80,9 @@ struct edma_soc_info { s8 (*queue_priority_mapping)[2]; const s16 (*xbar_chans)[2]; + + const struct dma_slave_map *slave_map; + int slavecnt; }; #endif diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index d3889b98a1a1..fb5625bcca9a 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -40,6 +40,8 @@ struct s3c64xx_spi_info { int num_cs; int (*cfg_gpio)(void); dma_filter_fn filter; + void *dma_tx; + void *dma_rx; }; /** diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h deleted file mode 100644 index 8ec6964a32a5..000000000000 --- a/include/linux/platform_data/usb-rcar-phy.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Cogent Embedded, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __USB_RCAR_PHY_H -#define __USB_RCAR_PHY_H - -#include <linux/types.h> - -struct rcar_phy_platform_data { - bool ferrite_bead:1; /* (R8A7778 only) */ - - bool port1_func:1; /* true: port 1 used by function, false: host */ - unsigned penc1:1; /* Output of the PENC1 pin in function mode */ - struct { /* Overcurrent pin control for ports 0..2 */ - bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */ - /* Set to false on port 1 in function mode */ - bool active_high:1; /* true: active high, false: active low */ - /* Set to true on port 1 in function mode */ - } ovc_pin[3]; /* (R8A7778 only has 2 ports) */ -}; - -#endif /* __USB_RCAR_PHY_H */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 297d4fa1cfe5..e03d6ba5e5b4 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -145,11 +145,12 @@ struct uart_port { #define UPIO_PORT (SERIAL_IO_PORT) /* 8b I/O port access */ #define UPIO_HUB6 (SERIAL_IO_HUB6) /* Hub6 ISA card */ -#define UPIO_MEM (SERIAL_IO_MEM) /* 8b MMIO access */ +#define UPIO_MEM (SERIAL_IO_MEM) /* driver-specific */ #define UPIO_MEM32 (SERIAL_IO_MEM32) /* 32b little endian */ #define UPIO_AU (SERIAL_IO_AU) /* Au1x00 and RT288x type IO */ #define UPIO_TSI (SERIAL_IO_TSI) /* Tsi108/109 type IO */ #define UPIO_MEM32BE (SERIAL_IO_MEM32BE) /* 32b big endian */ +#define UPIO_MEM16 (SERIAL_IO_MEM16) /* 16b little endian */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 7c536ac5be05..9f2bfd055742 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -32,6 +32,7 @@ enum { SCIx_SH2_SCIF_FIFODATA_REGTYPE, SCIx_SH3_SCIF_REGTYPE, SCIx_SH4_SCIF_REGTYPE, + SCIx_SH4_SCIF_BRG_REGTYPE, SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, SCIx_SH4_SCIF_FIFODATA_REGTYPE, SCIx_SH7705_SCIF_REGTYPE, diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index cce80e6dc7d1..53be3a4c60cb 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -425,6 +425,12 @@ struct spi_master { #define SPI_MASTER_MUST_RX BIT(3) /* requires rx */ #define SPI_MASTER_MUST_TX BIT(4) /* requires tx */ + /* + * on some hardware transfer size may be constrained + * the limit may depend on device transfer settings + */ + size_t (*max_transfer_size)(struct spi_device *spi); + /* lock and mutex for SPI bus locking */ spinlock_t bus_lock_spinlock; struct mutex bus_lock_mutex; @@ -762,10 +768,15 @@ struct spi_message { void *state; }; +static inline void spi_message_init_no_memset(struct spi_message *m) +{ + INIT_LIST_HEAD(&m->transfers); +} + static inline void spi_message_init(struct spi_message *m) { memset(m, 0, sizeof *m); - INIT_LIST_HEAD(&m->transfers); + spi_message_init_no_memset(m); } static inline void @@ -832,6 +843,15 @@ extern int spi_async(struct spi_device *spi, struct spi_message *message); extern int spi_async_locked(struct spi_device *spi, struct spi_message *message); +static inline size_t +spi_max_transfer_size(struct spi_device *spi) +{ + struct spi_master *master = spi->master; + if (!master->max_transfer_size) + return SIZE_MAX; + return master->max_transfer_size(spi); +} + /*---------------------------------------------------------------------------*/ /* All these synchronous SPI transfer routines are utilities layered @@ -1115,12 +1135,7 @@ spi_add_device(struct spi_device *spi); extern struct spi_device * spi_new_device(struct spi_master *, struct spi_board_info *); -static inline void -spi_unregister_device(struct spi_device *spi) -{ - if (spi) - device_unregister(&spi->dev); -} +extern void spi_unregister_device(struct spi_device *spi); extern const struct spi_device_id * spi_get_device_id(const struct spi_device *sdev); diff --git a/include/linux/tty.h b/include/linux/tty.h index 5e31f1b99037..2fd8708ea888 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -345,8 +345,6 @@ struct tty_file_private { #define TTY_HUPPED 18 /* Post driver->hangup() */ #define TTY_LDISC_HALTED 22 /* Line discipline is halted */ -#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) - /* Values for tty->flow_change */ #define TTY_THROTTLE_SAFE 1 #define TTY_UNTHROTTLE_SAFE 2 @@ -395,8 +393,6 @@ static inline int __init tty_init(void) { return 0; } #endif -extern void tty_write_flush(struct tty_struct *); - extern struct ktermios tty_std_termios; extern int vcs_init(void); @@ -419,9 +415,8 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) return tty; } -extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, - const char *routine); extern const char *tty_name(const struct tty_struct *tty); +extern const char *tty_driver_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int __tty_check_change(struct tty_struct *tty, int sig); extern int tty_check_change(struct tty_struct *tty); @@ -667,10 +662,16 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {} static inline void proc_tty_unregister_driver(struct tty_driver *d) {} #endif -#define tty_debug(tty, f, args...) \ - do { \ - printk(KERN_DEBUG "%s: %s: " f, __func__, \ - tty_name(tty), ##args); \ - } while (0) +#define tty_msg(fn, tty, f, ...) \ + fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__) + +#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__) +#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__) +#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__) +#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__) +#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__) + +#define tty_info_ratelimited(tty, f, ...) \ + tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__) #endif diff --git a/include/linux/uinput.h b/include/linux/uinput.h index 0994c0d01a09..75de43da2301 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -20,6 +20,11 @@ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> * * Changes/Revisions: + * 0.5 08/13/2015 (David Herrmann <dh.herrmann@gmail.com> & + * Benjamin Tissoires <benjamin.tissoires@redhat.com>) + * - add UI_DEV_SETUP ioctl + * - add UI_ABS_SETUP ioctl + * - add UI_GET_VERSION ioctl * 0.4 01/09/2014 (Benjamin Tissoires <benjamin.tissoires@redhat.com>) * - add UI_GET_SYSNAME ioctl * 0.3 24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>) diff --git a/include/linux/usb.h b/include/linux/usb.h index b9a28074210f..89533ba38691 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -510,7 +510,8 @@ struct usb3_lpm_parameters { * @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM * @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled * @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled - * @usb3_lpm_enabled: USB3 hardware LPM enabled + * @usb3_lpm_u1_enabled: USB3 hardware U1 LPM enabled + * @usb3_lpm_u2_enabled: USB3 hardware U2 LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) @@ -583,7 +584,8 @@ struct usb_device { unsigned usb2_hw_lpm_besl_capable:1; unsigned usb2_hw_lpm_enabled:1; unsigned usb2_hw_lpm_allowed:1; - unsigned usb3_lpm_enabled:1; + unsigned usb3_lpm_u1_enabled:1; + unsigned usb3_lpm_u2_enabled:1; int string_langid; /* static strings from the device */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 3d583a10b926..d82d0068872b 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -402,6 +402,9 @@ static inline void usb_ep_free_request(struct usb_ep *ep, static inline int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { + if (WARN_ON_ONCE(!ep->enabled && ep->address)) + return -ESHUTDOWN; + return ep->ops->queue(ep, req, gfp_flags); } @@ -1012,6 +1015,9 @@ static inline int usb_gadget_activate(struct usb_gadget *gadget) * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers * and should be called in_interrupt. * @driver: Driver model state for this driver. + * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL, + * this driver will be bound to any available UDC. + * @pending: UDC core private data used for deferred probe of this driver. * * Devices are disabled till a gadget driver successfully bind()s, which * means the driver will handle setup() requests needed to enumerate (and @@ -1072,6 +1078,9 @@ struct usb_gadget_driver { /* FIXME support safe rmmod */ struct device_driver driver; + + char *udc_name; + struct list_head pending; }; @@ -1117,8 +1126,6 @@ extern int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, void (*release)(struct device *dev)); extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget); extern void usb_del_gadget_udc(struct usb_gadget *gadget); -extern int usb_udc_attach_driver(const char *name, - struct usb_gadget_driver *driver); /*-------------------------------------------------------------------------*/ diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index f89c24bd53a4..4dcf8446dbcd 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -660,7 +660,7 @@ struct usb_mon_operations { /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ }; -extern struct usb_mon_operations *mon_ops; +extern const struct usb_mon_operations *mon_ops; static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) { @@ -682,7 +682,7 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, (*mon_ops->urb_complete)(bus, urb, status); } -int usb_mon_register(struct usb_mon_operations *ops); +int usb_mon_register(const struct usb_mon_operations *ops); void usb_mon_deregister(void); #else diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h deleted file mode 100644 index 7774c5986f07..000000000000 --- a/include/linux/usb/musb-omap.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2011-2012 by Texas Instruments - * - * The Inventra Controller Driver for Linux is free software; you - * can redistribute it and/or modify it under the terms of the GNU - * General Public License version 2 as published by the Free Software - * Foundation. - */ - -#ifndef __MUSB_OMAP_H__ -#define __MUSB_OMAP_H__ - -enum omap_musb_vbus_id_status { - OMAP_MUSB_UNKNOWN = 0, - OMAP_MUSB_ID_GROUND, - OMAP_MUSB_ID_FLOAT, - OMAP_MUSB_VBUS_VALID, - OMAP_MUSB_VBUS_OFF, -}; - -#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \ - defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE)) -void omap_musb_mailbox(enum omap_musb_vbus_id_status status); -#else -static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status) -{ -} -#endif - -#endif /* __MUSB_OMAP_H__ */ diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index fa6dc132bd1b..96ddfb7ab018 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -133,6 +133,21 @@ struct musb_hdrc_platform_data { const void *platform_ops; }; +enum musb_vbus_id_status { + MUSB_UNKNOWN = 0, + MUSB_ID_GROUND, + MUSB_ID_FLOAT, + MUSB_VBUS_VALID, + MUSB_VBUS_OFF, +}; + +#if IS_ENABLED(CONFIG_USB_MUSB_HDRC) +void musb_mailbox(enum musb_vbus_id_status status); +#else +static inline void musb_mailbox(enum musb_vbus_id_status status) +{ +} +#endif /* TUSB 6010 support */ diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h index c3fe9e48ce27..974bce93aa28 100644 --- a/include/linux/usb/of.h +++ b/include/linux/usb/of.h @@ -12,10 +12,16 @@ #include <linux/usb/phy.h> #if IS_ENABLED(CONFIG_OF) +enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np); bool of_usb_host_tpl_support(struct device_node *np); int of_usb_update_otg_caps(struct device_node *np, struct usb_otg_caps *otg_caps); #else +static inline enum usb_dr_mode +of_usb_get_dr_mode_by_phy(struct device_node *phy_np) +{ + return USB_DR_MODE_UNKNOWN; +} static inline bool of_usb_host_tpl_support(struct device_node *np) { return false; diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index bfb74723f151..4db191fe8c2c 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -105,12 +105,26 @@ struct renesas_usbhs_platform_callback { * some register needs USB chip specific parameters. * This struct show it to driver */ + +struct renesas_usbhs_driver_pipe_config { + u8 type; /* USB_ENDPOINT_XFER_xxx */ + u16 bufsize; + u8 bufnum; + bool double_buf; +}; +#define RENESAS_USBHS_PIPE(_type, _size, _num, _double_buf) { \ + .type = (_type), \ + .bufsize = (_size), \ + .bufnum = (_num), \ + .double_buf = (_double_buf), \ + } + struct renesas_usbhs_driver_param { /* * pipe settings */ - u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */ - int pipe_size; /* pipe_type array size */ + struct renesas_usbhs_driver_pipe_config *pipe_configs; + int pipe_size; /* pipe_configs array size */ /* * option: |
