10 files changed, 96 insertions, 19 deletions
diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h
index 096476f1fb35..493dedb7a67b 100644
--- a/include/linux/debug_locks.h
+++ b/include/linux/debug_locks.h
@@ -2,12 +2,19 @@
 #define __LINUX_DEBUG_LOCKING_H
 
 #include <linux/kernel.h>
+#include <asm/atomic.h>
 
 struct task_struct;
 
 extern int debug_locks;
 extern int debug_locks_silent;
 
+
+static inline int __debug_locks_off(void)
+{
+	return xchg(&debug_locks, 0);
+}
+
 /*
  * Generic 'turn off all lock debugging' function:
  */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f563c5013932..330c4b1bfcaa 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -173,8 +173,12 @@ struct fb_fix_screeninfo {
 /* Interpretation of offset for color fields: All offsets are from the right,
  * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
  * can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified. This implies
- * big-endian byte order if bits_per_pixel is greater than 8.
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
  */
 struct fb_bitfield {
 	__u32 offset;			/* beginning of bitfield	*/
diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h
index 671decbd2aeb..934e22d65801 100644
--- a/include/linux/fiemap.h
+++ b/include/linux/fiemap.h
@@ -11,6 +11,8 @@
 #ifndef _LINUX_FIEMAP_H
 #define _LINUX_FIEMAP_H
 
+#include <linux/types.h>
+
 struct fiemap_extent {
 	__u64 fe_logical;  /* logical offset in bytes for the start of
 			    * the extent from the beginning of the file */
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index dcfb93337e9a..d87247d2641f 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -15,19 +15,6 @@
 extern struct files_struct init_files;
 extern struct fs_struct init_fs;
 
-#define INIT_KIOCTX(name, which_mm) \
-{							\
-	.users		= ATOMIC_INIT(1),		\
-	.dead		= 0,				\
-	.mm		= &which_mm,			\
-	.user_id	= 0,				\
-	.next		= NULL,				\
-	.wait		= __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \
-	.ctx_lock	= __SPIN_LOCK_UNLOCKED(name.ctx_lock), \
-	.reqs_active	= 0U,				\
-	.max_reqs	= ~0U,				\
-}
-
 #define INIT_MM(name) \
 {			 					\
 	.mm_rb		= RB_ROOT,				\
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index ee98cd570885..06ba90c211a5 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2514,6 +2514,8 @@
 #define PCI_DEVICE_ID_INTEL_IOAT_TBG3	0x3433
 #define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
 #define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB	0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG	0x358e
 #define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
 #define PCI_DEVICE_ID_INTEL_82855GM_IG	0x3582
 #define PCI_DEVICE_ID_INTEL_E7520_MCH	0x3590
diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h
new file mode 100644
index 000000000000..12d63a30c347
--- /dev/null
+++ b/include/linux/rotary_encoder.h
@@ -0,0 +1,13 @@
+#ifndef __ROTARY_ENCODER_H__
+#define __ROTARY_ENCODER_H__
+
+struct rotary_encoder_platform_data {
+	unsigned int steps;
+	unsigned int axis;
+	unsigned int gpio_a;
+	unsigned int gpio_b;
+	unsigned int inverted_a;
+	unsigned int inverted_b;
+};
+
+#endif /* __ROTARY_ENCODER_H__ */
diff --git a/include/linux/sht15.h b/include/linux/sht15.h
new file mode 100644
index 000000000000..046bce05ecab
--- /dev/null
+++ b/include/linux/sht15.h
@@ -0,0 +1,24 @@
+/*
+ * sht15.h - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct sht15_platform_data - sht15 connectivity info
+ * @gpio_data:	no. of gpio to which bidirectional data line is connected
+ * @gpio_sck:	no. of gpio to which the data clock is connected.
+ * @supply_mv:	supply voltage in mv. Overridden by regulator if available.
+ **/
+struct sht15_platform_data {
+	int gpio_data;
+	int gpio_sck;
+	int supply_mv;
+};
+
diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
new file mode 100644
index 000000000000..4231104c9afa
--- /dev/null
+++ b/include/linux/spi/ad7879.h
@@ -0,0 +1,35 @@
+/* linux/spi/ad7879.h */
+
+/* Touchscreen characteristics vary between boards and models.  The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7879_platform_data {
+	u16	model;			/* 7879 */
+	u16	x_plate_ohms;
+	u16	x_min, x_max;
+	u16	y_min, y_max;
+	u16	pressure_min, pressure_max;
+
+	/* [0..255] 0=OFF Starts at 1=550us and goes
+	 * all the way to 9.440ms in steps of 35us.
+	 */
+	u8	pen_down_acc_interval;
+	/* [0..15] Starts at 0=128us and goes all the
+	 * way to 4.096ms in steps of 128us.
+	 */
+	u8	first_conversion_delay;
+	/* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+	u8	acquisition_time;
+	/* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
+	u8	averaging;
+	/* [0..3] Perform X measurements 0 = OFF,
+	 * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
+	 */
+	u8	median;
+	/* 1 = AUX/VBAT/GPIO set to GPIO Output */
+	u8	gpio_output;
+	/* Initial GPIO pin state (valid if gpio_output = 1) */
+	u8	gpio_default;
+};
diff --git a/include/linux/stringify.h b/include/linux/stringify.h
index 0b4388356c87..841cec8ed525 100644
--- a/include/linux/stringify.h
+++ b/include/linux/stringify.h
@@ -6,7 +6,7 @@
  * converts to "bar".
  */
 
-#define __stringify_1(x)	#x
-#define __stringify(x)		__stringify_1(x)
+#define __stringify_1(x...)	#x
+#define __stringify(x...)	__stringify_1(x)
 
 #endif	/* !__LINUX_STRINGIFY_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index b95842542590..625e9e4639c6 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -29,7 +29,7 @@
 /**
  * usb_serial_port: structure for the specific ports of a device.
  * @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
+ * @port: pointer to the corresponding tty_port for this port.
  * @lock: spinlock to grab when updating portions of this structure.
  * @mutex: mutex used to synchronize serial_open() and serial_close()
  *	access for this port.
@@ -44,19 +44,22 @@
  * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
  * 	for this port.
  * @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
  * @read_urb: pointer to the bulk in struct urb for this port.
  * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
  *	port.
  * @bulk_out_buffer: pointer to the bulk out buffer for this port.
  * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
  * @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_urb_busy: port`s writing status
  * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
  *	port.
  * @write_wait: a wait_queue_head_t used by the port.
  * @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
  * @throttled: nonzero if the read urb is inactive to throttle the device
  * @throttle_req: nonzero if the tty wants to throttle us
+ * @console: attached usb serial console
+ * @dev: pointer to the serial device
  *
  * This structure is used by the usb-serial core and drivers for the specific
  * ports of a device.