diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/axp20x.h | 5 | ||||
| -rw-r--r-- | include/linux/mfd/cros_ec.h | 6 | ||||
| -rw-r--r-- | include/linux/mfd/cros_ec_commands.h | 94 | ||||
| -rw-r--r-- | include/linux/mfd/ingenic-tcu.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/madera/core.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 1 | ||||
| -rw-r--r-- | include/linux/mfd/ti_am335x_tscadc.h | 4 | ||||
| -rw-r--r-- | include/linux/mfd/tmio.h | 11 | ||||
| -rw-r--r-- | include/linux/mfd/wm8994/pdata.h | 3 |
9 files changed, 117 insertions, 16 deletions
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h index 517e60eecbcb..a353cd22b388 100644 --- a/include/linux/mfd/axp20x.h +++ b/include/linux/mfd/axp20x.h @@ -35,7 +35,7 @@ enum axp20x_variants { #define AXP152_ALDO_OP_MODE 0x13 #define AXP152_LDO0_CTRL 0x15 #define AXP152_DCDC2_V_OUT 0x23 -#define AXP152_DCDC2_V_SCAL 0x25 +#define AXP152_DCDC2_V_RAMP 0x25 #define AXP152_DCDC1_V_OUT 0x26 #define AXP152_DCDC3_V_OUT 0x27 #define AXP152_ALDO12_V_OUT 0x28 @@ -53,7 +53,7 @@ enum axp20x_variants { #define AXP20X_USB_OTG_STATUS 0x02 #define AXP20X_PWR_OUT_CTRL 0x12 #define AXP20X_DCDC2_V_OUT 0x23 -#define AXP20X_DCDC2_LDO3_V_SCAL 0x25 +#define AXP20X_DCDC2_LDO3_V_RAMP 0x25 #define AXP20X_DCDC3_V_OUT 0x27 #define AXP20X_LDO24_V_OUT 0x28 #define AXP20X_LDO3_V_OUT 0x29 @@ -266,6 +266,7 @@ enum axp20x_variants { #define AXP288_RT_BATT_V_H 0xa0 #define AXP288_RT_BATT_V_L 0xa1 +#define AXP813_ACIN_PATH_CTRL 0x3a #define AXP813_ADC_RATE 0x85 /* Fuel Gauge */ diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index e44e3ec8a9c7..de8b588c8776 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -317,7 +317,9 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev); * @wake_event: Pointer to a bool set to true upon return if the event might be * treated as a wake event. Ignored if null. * - * Return: 0 on success or negative error code. + * Return: negative error code on errors; 0 for no data; or else number of + * bytes received (i.e., an event was retrieved successfully). Event types are + * written out to @ec_dev->event_data.event_type on success. */ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event); @@ -329,7 +331,7 @@ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event); * events raised and call the functions in the ec notifier. This function * is a helper to know which events are raised. * - * Return: 0 on success or negative error code. + * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*. */ u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev); diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 9a9631f0559e..fc91082d4c35 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -2791,6 +2791,100 @@ struct ec_response_battery_vendor_param { } __packed; /*****************************************************************************/ +/* Commands for I2S recording on audio codec. */ + +#define EC_CMD_CODEC_I2S 0x00BC + +enum ec_codec_i2s_subcmd { + EC_CODEC_SET_SAMPLE_DEPTH = 0x0, + EC_CODEC_SET_GAIN = 0x1, + EC_CODEC_GET_GAIN = 0x2, + EC_CODEC_I2S_ENABLE = 0x3, + EC_CODEC_I2S_SET_CONFIG = 0x4, + EC_CODEC_I2S_SET_TDM_CONFIG = 0x5, + EC_CODEC_I2S_SET_BCLK = 0x6, +}; + +enum ec_sample_depth_value { + EC_CODEC_SAMPLE_DEPTH_16 = 0, + EC_CODEC_SAMPLE_DEPTH_24 = 1, +}; + +enum ec_i2s_config { + EC_DAI_FMT_I2S = 0, + EC_DAI_FMT_RIGHT_J = 1, + EC_DAI_FMT_LEFT_J = 2, + EC_DAI_FMT_PCM_A = 3, + EC_DAI_FMT_PCM_B = 4, + EC_DAI_FMT_PCM_TDM = 5, +}; + +struct ec_param_codec_i2s { + /* + * enum ec_codec_i2s_subcmd + */ + uint8_t cmd; + union { + /* + * EC_CODEC_SET_SAMPLE_DEPTH + * Value should be one of ec_sample_depth_value. + */ + uint8_t depth; + + /* + * EC_CODEC_SET_GAIN + * Value should be 0~43 for both channels. + */ + struct ec_param_codec_i2s_set_gain { + uint8_t left; + uint8_t right; + } __packed gain; + + /* + * EC_CODEC_I2S_ENABLE + * 1 to enable, 0 to disable. + */ + uint8_t i2s_enable; + + /* + * EC_CODEC_I2S_SET_COFNIG + * Value should be one of ec_i2s_config. + */ + uint8_t i2s_config; + + /* + * EC_CODEC_I2S_SET_TDM_CONFIG + * Value should be one of ec_i2s_config. + */ + struct ec_param_codec_i2s_tdm { + /* + * 0 to 496 + */ + int16_t ch0_delay; + /* + * -1 to 496 + */ + int16_t ch1_delay; + uint8_t adjacent_to_ch0; + uint8_t adjacent_to_ch1; + } __packed tdm_param; + + /* + * EC_CODEC_I2S_SET_BCLK + */ + uint32_t bclk; + }; +} __packed; + +/* + * For subcommand EC_CODEC_GET_GAIN. + */ +struct ec_response_codec_gain { + uint8_t left; + uint8_t right; +} __packed; + +/*****************************************************************************/ /* System commands */ /* diff --git a/include/linux/mfd/ingenic-tcu.h b/include/linux/mfd/ingenic-tcu.h index ab16ad283def..2083fa20821d 100644 --- a/include/linux/mfd/ingenic-tcu.h +++ b/include/linux/mfd/ingenic-tcu.h @@ -41,7 +41,7 @@ #define TCU_TCSR_PRESCALE_LSB 3 #define TCU_TCSR_PRESCALE_MASK 0x38 -#define TCU_TCSR_PWM_SD BIT(9) /* 0: Shutdown abruptly 1: gracefully */ +#define TCU_TCSR_PWM_SD BIT(9) /* 0: Shutdown gracefully 1: abruptly */ #define TCU_TCSR_PWM_INITL_HIGH BIT(8) /* Sets the initial output level */ #define TCU_TCSR_PWM_EN BIT(7) /* PWM pin output enable */ diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h index fe69c0f4398f..4d5d51a9c8a6 100644 --- a/include/linux/mfd/madera/core.h +++ b/include/linux/mfd/madera/core.h @@ -15,6 +15,7 @@ #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/mfd/madera/pdata.h> +#include <linux/mutex.h> #include <linux/notifier.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> @@ -37,6 +38,8 @@ enum madera_type { #define MADERA_MAX_MICBIAS 4 +#define MADERA_MAX_HP_OUTPUT 3 + /* Notifier events */ #define MADERA_NOTIFY_VOICE_TRIGGER 0x1 #define MADERA_NOTIFY_HPDET 0x2 @@ -183,6 +186,10 @@ struct madera { unsigned int num_childbias[MADERA_MAX_MICBIAS]; struct snd_soc_dapm_context *dapm; + struct mutex dapm_ptr_lock; + unsigned int hp_ena; + bool out_clamp[MADERA_MAX_HP_OUTPUT]; + bool out_shorted[MADERA_MAX_HP_OUTPUT]; struct blocking_notifier_head notifier; }; diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index 6c1ad160ed87..c1b25f5e386d 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -440,6 +440,7 @@ #define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1) #define IMX6SX_GPR12_PCIE_TEST_POWERDOWN BIT(30) +#define IMX6SX_GPR12_PCIE_PM_TURN_OFF BIT(16) #define IMX6SX_GPR12_PCIE_RX_EQ_MASK (0x7 << 0) #define IMX6SX_GPR12_PCIE_RX_EQ_2 (0x2 << 0) diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index b9a53e013bff..483168403ae5 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -78,6 +78,8 @@ #define STEPCONFIG_YNN BIT(8) #define STEPCONFIG_XNP BIT(9) #define STEPCONFIG_YPN BIT(10) +#define STEPCONFIG_RFP(val) ((val) << 12) +#define STEPCONFIG_RFP_VREFP (0x3 << 12) #define STEPCONFIG_INM_MASK (0xF << 15) #define STEPCONFIG_INM(val) ((val) << 15) #define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) @@ -86,6 +88,8 @@ #define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) #define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) #define STEPCONFIG_FIFO1 BIT(26) +#define STEPCONFIG_RFM(val) ((val) << 23) +#define STEPCONFIG_RFM_VREFN (0x3 << 23) /* Delay register */ #define STEPDELAY_OPEN_MASK (0x3FFFF << 0) diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 1e70060c92ce..739b7bf37eaa 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -54,12 +54,8 @@ * idle before writing to some registers. */ #define TMIO_MMC_HAS_IDLE_WAIT BIT(4) -/* - * A GPIO is used for card hotplug detection. We need an extra flag for this, - * because 0 is a valid GPIO number too, and requiring users to specify - * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility. - */ -#define TMIO_MMC_USE_GPIO_CD BIT(5) + +/* BIT(5) is unused */ /* * Some controllers have CMD12 automatically @@ -83,7 +79,7 @@ /* Some controllers have a CBSY bit */ #define TMIO_MMC_HAVE_CBSY BIT(11) -/* Some controllers that support HS400 use use 4 taps while others use 8. */ +/* Some controllers that support HS400 use 4 taps while others use 8. */ #define TMIO_MMC_HAVE_4TAP_HS400 BIT(13) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); @@ -104,7 +100,6 @@ struct tmio_mmc_data { unsigned long capabilities2; unsigned long flags; u32 ocr_mask; /* available voltages */ - unsigned int cd_gpio; int alignment_shift; dma_addr_t dma_rx_offset; unsigned int max_blk_count; diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index b19c370fe81a..f346167c0e00 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -20,9 +20,6 @@ #define WM8994_NUM_AIF 3 struct wm8994_ldo_pdata { - /** GPIOs to enable regulator, 0 or less if not available */ - int enable; - const struct regulator_init_data *init_data; }; |
