diff options
Diffstat (limited to 'include/linux/mfd')
37 files changed, 564 insertions, 818 deletions
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 20949dde35cd..e44e3ec8a9c7 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -36,7 +36,7 @@ * I2C requires 1 additional byte for requests. * I2C requires 2 additional bytes for responses. * SPI requires up to 32 additional bytes for responses. - * */ + */ #define EC_PROTO_VERSION_UNKNOWN 0 #define EC_MAX_REQUEST_OVERHEAD 1 #define EC_MAX_RESPONSE_OVERHEAD 32 @@ -58,13 +58,14 @@ enum { EC_MAX_MSG_BYTES = 64 * 1024, }; -/* - * @version: Command version number (often 0) - * @command: Command to send (EC_CMD_...) - * @outsize: Outgoing length in bytes - * @insize: Max number of bytes to accept from EC - * @result: EC's response to the command (separate from communication failure) - * @data: Where to put the incoming data from EC and outgoing data to EC +/** + * struct cros_ec_command - Information about a ChromeOS EC command. + * @version: Command version number (often 0). + * @command: Command to send (EC_CMD_...). + * @outsize: Outgoing length in bytes. + * @insize: Max number of bytes to accept from the EC. + * @result: EC's response to the command (separate from communication failure). + * @data: Where to put the incoming data from EC and outgoing data to EC. */ struct cros_ec_command { uint32_t version; @@ -76,48 +77,55 @@ struct cros_ec_command { }; /** - * struct cros_ec_device - Information about a ChromeOS EC device - * - * @phys_name: name of physical comms layer (e.g. 'i2c-4') + * struct cros_ec_device - Information about a ChromeOS EC device. + * @phys_name: Name of physical comms layer (e.g. 'i2c-4'). * @dev: Device pointer for physical comms device - * @was_wake_device: true if this device was set to wake the system from - * sleep at the last suspend - * @cmd_readmem: direct read of the EC memory-mapped region, if supported - * @offset is within EC_LPC_ADDR_MEMMAP region. - * @bytes: number of bytes to read. zero means "read a string" (including - * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be read. - * Caller must ensure that the buffer is large enough for the result when - * reading a string. - * - * @priv: Private data - * @irq: Interrupt to use - * @id: Device id - * @din: input buffer (for data from EC) - * @dout: output buffer (for data to EC) - * \note - * These two buffers will always be dword-aligned and include enough - * space for up to 7 word-alignment bytes also, so we can ensure that - * the body of the message is always dword-aligned (64-bit). - * We use this alignment to keep ARM and x86 happy. Probably word - * alignment would be OK, there might be a small performance advantage - * to using dword. - * @din_size: size of din buffer to allocate (zero to use static din) - * @dout_size: size of dout buffer to allocate (zero to use static dout) - * @wake_enabled: true if this device can wake the system from sleep - * @suspended: true if this device had been suspended - * @cmd_xfer: send command to EC and get response - * Returns the number of bytes received if the communication succeeded, but - * that doesn't mean the EC was happy with the command. The caller - * should check msg.result for the EC's result code. - * @pkt_xfer: send packet to EC and get response - * @lock: one transaction at a time - * @mkbp_event_supported: true if this EC supports the MKBP event protocol. - * @event_notifier: interrupt event notifier for transport devices. - * @event_data: raw payload transferred with the MKBP event. - * @event_size: size in bytes of the event data. + * @was_wake_device: True if this device was set to wake the system from + * sleep at the last suspend. + * @cros_class: The class structure for this device. + * @cmd_readmem: Direct read of the EC memory-mapped region, if supported. + * @offset: Is within EC_LPC_ADDR_MEMMAP region. + * @bytes: Number of bytes to read. zero means "read a string" (including + * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be + * read. Caller must ensure that the buffer is large enough for the + * result when reading a string. + * @max_request: Max size of message requested. + * @max_response: Max size of message response. + * @max_passthru: Max sice of passthru message. + * @proto_version: The protocol version used for this device. + * @priv: Private data. + * @irq: Interrupt to use. + * @id: Device id. + * @din: Input buffer (for data from EC). This buffer will always be + * dword-aligned and include enough space for up to 7 word-alignment + * bytes also, so we can ensure that the body of the message is always + * dword-aligned (64-bit). We use this alignment to keep ARM and x86 + * happy. Probably word alignment would be OK, there might be a small + * performance advantage to using dword. + * @dout: Output buffer (for data to EC). This buffer will always be + * dword-aligned and include enough space for up to 7 word-alignment + * bytes also, so we can ensure that the body of the message is always + * dword-aligned (64-bit). We use this alignment to keep ARM and x86 + * happy. Probably word alignment would be OK, there might be a small + * performance advantage to using dword. + * @din_size: Size of din buffer to allocate (zero to use static din). + * @dout_size: Size of dout buffer to allocate (zero to use static dout). + * @wake_enabled: True if this device can wake the system from sleep. + * @suspended: True if this device had been suspended. + * @cmd_xfer: Send command to EC and get response. + * Returns the number of bytes received if the communication + * succeeded, but that doesn't mean the EC was happy with the + * command. The caller should check msg.result for the EC's result + * code. + * @pkt_xfer: Send packet to EC and get response. + * @lock: One transaction at a time. + * @mkbp_event_supported: True if this EC supports the MKBP event protocol. + * @event_notifier: Interrupt event notifier for transport devices. + * @event_data: Raw payload transferred with the MKBP event. + * @event_size: Size in bytes of the event data. + * @host_event_wake_mask: Mask of host events that cause wake from suspend. */ struct cros_ec_device { - /* These are used by other drivers that want to talk to the EC */ const char *phys_name; struct device *dev; @@ -153,20 +161,19 @@ struct cros_ec_device { }; /** - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information - * + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information. * @sensor_num: Id of the sensor, as reported by the EC. */ struct cros_ec_sensor_platform { u8 sensor_num; }; -/* struct cros_ec_platform - ChromeOS EC platform information - * - * @ec_name: name of EC device (e.g. 'cros-ec', 'cros-pd', ...) - * used in /dev/ and sysfs. - * @cmd_offset: offset to apply for each command. Set when - * registering a devicde behind another one. +/** + * struct cros_ec_platform - ChromeOS EC platform information. + * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...) + * used in /dev/ and sysfs. + * @cmd_offset: Offset to apply for each command. Set when + * registering a device behind another one. */ struct cros_ec_platform { const char *ec_name; @@ -175,16 +182,16 @@ struct cros_ec_platform { struct cros_ec_debugfs; -/* - * struct cros_ec_dev - ChromeOS EC device entry point - * - * @class_dev: Device structure used in sysfs - * @cdev: Character device structure in /dev - * @ec_dev: cros_ec_device structure to talk to the physical device - * @dev: pointer to the platform device - * @debug_info: cros_ec_debugfs structure for debugging information - * @has_kb_wake_angle: true if at least 2 accelerometer are connected to the EC. - * @cmd_offset: offset to apply for each command. +/** + * struct cros_ec_dev - ChromeOS EC device entry point. + * @class_dev: Device structure used in sysfs. + * @cdev: Character device structure in /dev. + * @ec_dev: cros_ec_device structure to talk to the physical device. + * @dev: Pointer to the platform device. + * @debug_info: cros_ec_debugfs structure for debugging information. + * @has_kb_wake_angle: True if at least 2 accelerometer are connected to the EC. + * @cmd_offset: Offset to apply for each command. + * @features: Features supported by the EC. */ struct cros_ec_dev { struct device class_dev; @@ -200,124 +207,129 @@ struct cros_ec_dev { #define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev) /** - * cros_ec_suspend - Handle a suspend operation for the ChromeOS EC device + * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device. + * @ec_dev: Device to suspend. * * This can be called by drivers to handle a suspend event. * - * ec_dev: Device to suspend - * @return 0 if ok, -ve on error + * Return: 0 on success or negative error code. */ int cros_ec_suspend(struct cros_ec_device *ec_dev); /** - * cros_ec_resume - Handle a resume operation for the ChromeOS EC device + * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device. + * @ec_dev: Device to resume. * * This can be called by drivers to handle a resume event. * - * @ec_dev: Device to resume - * @return 0 if ok, -ve on error + * Return: 0 on success or negative error code. */ int cros_ec_resume(struct cros_ec_device *ec_dev); /** - * cros_ec_prepare_tx - Prepare an outgoing message in the output buffer + * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer. + * @ec_dev: Device to register. + * @msg: Message to write. * * This is intended to be used by all ChromeOS EC drivers, but at present * only SPI uses it. Once LPC uses the same protocol it can start using it. * I2C could use it now, with a refactor of the existing code. * - * @ec_dev: Device to register - * @msg: Message to write + * Return: 0 on success or negative error code. */ int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); /** - * cros_ec_check_result - Check ec_msg->result + * cros_ec_check_result() - Check ec_msg->result. + * @ec_dev: EC device. + * @msg: Message to check. * * This is used by ChromeOS EC drivers to check the ec_msg->result for * errors and to warn about them. * - * @ec_dev: EC device - * @msg: Message to check + * Return: 0 on success or negative error code. */ int cros_ec_check_result(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); /** - * cros_ec_cmd_xfer - Send a command to the ChromeOS EC + * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC. + * @ec_dev: EC device. + * @msg: Message to write. * * Call this to send a command to the ChromeOS EC. This should be used * instead of calling the EC's cmd_xfer() callback directly. * - * @ec_dev: EC device - * @msg: Message to write + * Return: 0 on success or negative error code. */ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); /** - * cros_ec_cmd_xfer_status - Send a command to the ChromeOS EC + * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC. + * @ec_dev: EC device. + * @msg: Message to write. * * This function is identical to cros_ec_cmd_xfer, except it returns success * status only if both the command was transmitted successfully and the EC * replied with success status. It's not necessary to check msg->result when * using this function. * - * @ec_dev: EC device - * @msg: Message to write - * @return: Num. of bytes transferred on success, <0 on failure + * Return: The number of bytes transferred on success or negative error code. */ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, struct cros_ec_command *msg); /** - * cros_ec_remove - Remove a ChromeOS EC + * cros_ec_remove() - Remove a ChromeOS EC. + * @ec_dev: Device to register. * * Call this to deregister a ChromeOS EC, then clean up any private data. * - * @ec_dev: Device to register - * @return 0 if ok, -ve on error + * Return: 0 on success or negative error code. */ int cros_ec_remove(struct cros_ec_device *ec_dev); /** - * cros_ec_register - Register a new ChromeOS EC, using the provided info + * cros_ec_register() - Register a new ChromeOS EC, using the provided info. + * @ec_dev: Device to register. * * Before calling this, allocate a pointer to a new device and then fill * in all the fields up to the --private-- marker. * - * @ec_dev: Device to register - * @return 0 if ok, -ve on error + * Return: 0 on success or negative error code. */ int cros_ec_register(struct cros_ec_device *ec_dev); /** - * cros_ec_query_all - Query the protocol version supported by the ChromeOS EC + * cros_ec_query_all() - Query the protocol version supported by the + * ChromeOS EC. + * @ec_dev: Device to register. * - * @ec_dev: Device to register - * @return 0 if ok, -ve on error + * Return: 0 on success or negative error code. */ int cros_ec_query_all(struct cros_ec_device *ec_dev); /** - * cros_ec_get_next_event - Fetch next event from the ChromeOS EC - * - * @ec_dev: Device to fetch event from + * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC. + * @ec_dev: Device to fetch event from. * @wake_event: Pointer to a bool set to true upon return if the event might be * treated as a wake event. Ignored if null. * - * Returns: 0 on success, Linux error number on failure + * Return: 0 on success or negative error code. */ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event); /** - * cros_ec_get_host_event - Return a mask of event set by the EC. + * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC. + * @ec_dev: Device to fetch event from. * - * When MKBP is supported, when the EC raises an interrupt, - * We collect the events raised and call the functions in the ec notifier. + * When MKBP is supported, when the EC raises an interrupt, we collect the + * events raised and call the functions in the ec notifier. This function + * is a helper to know which events are raised. * - * This function is a helper to know which events are raised. + * Return: 0 on success or negative error code. */ u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev); diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 6e1ab9bead28..9a9631f0559e 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -306,15 +306,18 @@ enum host_event_code { /* Host event mask */ #define EC_HOST_EVENT_MASK(event_code) (1UL << ((event_code) - 1)) -/* Arguments at EC_LPC_ADDR_HOST_ARGS */ +/** + * struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS + * @flags: The host argument flags. + * @command_version: Command version. + * @data_size: The length of data. + * @checksum: Checksum; sum of command + flags + command_version + data_size + + * all params/response data bytes. + */ struct ec_lpc_host_args { uint8_t flags; uint8_t command_version; uint8_t data_size; - /* - * Checksum; sum of command + flags + command_version + data_size + - * all params/response data bytes. - */ uint8_t checksum; } __packed; @@ -468,54 +471,43 @@ struct ec_lpc_host_args { #define EC_HOST_REQUEST_VERSION 3 -/* Version 3 request from host */ +/** + * struct ec_host_request - Version 3 request from host. + * @struct_version: Should be 3. The EC will return EC_RES_INVALID_HEADER if it + * receives a header with a version it doesn't know how to + * parse. + * @checksum: Checksum of request and data; sum of all bytes including checksum + * should total to 0. + * @command: Command to send (EC_CMD_...) + * @command_version: Command version. + * @reserved: Unused byte in current protocol version; set to 0. + * @data_len: Length of data which follows this header. + */ struct ec_host_request { - /* Struct version (=3) - * - * EC will return EC_RES_INVALID_HEADER if it receives a header with a - * version it doesn't know how to parse. - */ uint8_t struct_version; - - /* - * Checksum of request and data; sum of all bytes including checksum - * should total to 0. - */ uint8_t checksum; - - /* Command code */ uint16_t command; - - /* Command version */ uint8_t command_version; - - /* Unused byte in current protocol version; set to 0 */ uint8_t reserved; - - /* Length of data which follows this header */ uint16_t data_len; } __packed; #define EC_HOST_RESPONSE_VERSION 3 -/* Version 3 response from EC */ +/** + * struct ec_host_response - Version 3 response from EC. + * @struct_version: Struct version (=3). + * @checksum: Checksum of response and data; sum of all bytes including + * checksum should total to 0. + * @result: EC's response to the command (separate from communication failure) + * @data_len: Length of data which follows this header. + * @reserved: Unused bytes in current protocol version; set to 0. + */ struct ec_host_response { - /* Struct version (=3) */ uint8_t struct_version; - - /* - * Checksum of response and data; sum of all bytes including checksum - * should total to 0. - */ uint8_t checksum; - - /* Result code (EC_RES_*) */ uint16_t result; - - /* Length of data which follows this header */ uint16_t data_len; - - /* Unused bytes in current protocol version; set to 0 */ uint16_t reserved; } __packed; @@ -540,6 +532,10 @@ struct ec_host_response { */ #define EC_CMD_PROTO_VERSION 0x00 +/** + * struct ec_response_proto_version - Response to the proto version command. + * @version: The protocol version. + */ struct ec_response_proto_version { uint32_t version; } __packed; @@ -550,12 +546,20 @@ struct ec_response_proto_version { */ #define EC_CMD_HELLO 0x01 +/** + * struct ec_params_hello - Parameters to the hello command. + * @in_data: Pass anything here. + */ struct ec_params_hello { - uint32_t in_data; /* Pass anything here */ + uint32_t in_data; } __packed; +/** + * struct ec_response_hello - Response to the hello command. + * @out_data: Output will be in_data + 0x01020304. + */ struct ec_response_hello { - uint32_t out_data; /* Output will be in_data + 0x01020304 */ + uint32_t out_data; } __packed; /* Get version number */ @@ -567,22 +571,37 @@ enum ec_current_image { EC_IMAGE_RW }; +/** + * struct ec_response_get_version - Response to the get version command. + * @version_string_ro: Null-terminated RO firmware version string. + * @version_string_rw: Null-terminated RW firmware version string. + * @reserved: Unused bytes; was previously RW-B firmware version string. + * @current_image: One of ec_current_image. + */ struct ec_response_get_version { - /* Null-terminated version strings for RO, RW */ char version_string_ro[32]; char version_string_rw[32]; - char reserved[32]; /* Was previously RW-B string */ - uint32_t current_image; /* One of ec_current_image */ + char reserved[32]; + uint32_t current_image; } __packed; /* Read test */ #define EC_CMD_READ_TEST 0x03 +/** + * struct ec_params_read_test - Parameters for the read test command. + * @offset: Starting value for read buffer. + * @size: Size to read in bytes. + */ struct ec_params_read_test { - uint32_t offset; /* Starting value for read buffer */ - uint32_t size; /* Size to read in bytes */ + uint32_t offset; + uint32_t size; } __packed; +/** + * struct ec_response_read_test - Response to the read test command. + * @data: Data returned by the read test command. + */ struct ec_response_read_test { uint32_t data[32]; } __packed; @@ -597,18 +616,27 @@ struct ec_response_read_test { /* Get chip info */ #define EC_CMD_GET_CHIP_INFO 0x05 +/** + * struct ec_response_get_chip_info - Response to the get chip info command. + * @vendor: Null-terminated string for chip vendor. + * @name: Null-terminated string for chip name. + * @revision: Null-terminated string for chip mask version. + */ struct ec_response_get_chip_info { - /* Null-terminated strings */ char vendor[32]; char name[32]; - char revision[32]; /* Mask version */ + char revision[32]; } __packed; /* Get board HW version */ #define EC_CMD_GET_BOARD_VERSION 0x06 +/** + * struct ec_response_board_version - Response to the board version command. + * @board_version: A monotonously incrementing number. + */ struct ec_response_board_version { - uint16_t board_version; /* A monotonously incrementing number. */ + uint16_t board_version; } __packed; /* @@ -621,27 +649,42 @@ struct ec_response_board_version { */ #define EC_CMD_READ_MEMMAP 0x07 +/** + * struct ec_params_read_memmap - Parameters for the read memory map command. + * @offset: Offset in memmap (EC_MEMMAP_*). + * @size: Size to read in bytes. + */ struct ec_params_read_memmap { - uint8_t offset; /* Offset in memmap (EC_MEMMAP_*) */ - uint8_t size; /* Size to read in bytes */ + uint8_t offset; + uint8_t size; } __packed; /* Read versions supported for a command */ #define EC_CMD_GET_CMD_VERSIONS 0x08 +/** + * struct ec_params_get_cmd_versions - Parameters for the get command versions. + * @cmd: Command to check. + */ struct ec_params_get_cmd_versions { - uint8_t cmd; /* Command to check */ + uint8_t cmd; } __packed; +/** + * struct ec_params_get_cmd_versions_v1 - Parameters for the get command + * versions (v1) + * @cmd: Command to check. + */ struct ec_params_get_cmd_versions_v1 { - uint16_t cmd; /* Command to check */ + uint16_t cmd; } __packed; +/** + * struct ec_response_get_cmd_version - Response to the get command versions. + * @version_mask: Mask of supported versions; use EC_VER_MASK() to compare with + * a desired version. + */ struct ec_response_get_cmd_versions { - /* - * Mask of supported versions; use EC_VER_MASK() to compare with a - * desired version. - */ uint32_t version_mask; } __packed; @@ -659,6 +702,11 @@ enum ec_comms_status { EC_COMMS_STATUS_PROCESSING = 1 << 0, /* Processing cmd */ }; +/** + * struct ec_response_get_comms_status - Response to the get comms status + * command. + * @flags: Mask of enum ec_comms_status. + */ struct ec_response_get_comms_status { uint32_t flags; /* Mask of enum ec_comms_status */ } __packed; @@ -685,19 +733,19 @@ struct ec_response_test_protocol { /* EC_RES_IN_PROGRESS may be returned if a command is slow */ #define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED (1 << 0) +/** + * struct ec_response_get_protocol_info - Response to the get protocol info. + * @protocol_versions: Bitmask of protocol versions supported (1 << n means + * version n). + * @max_request_packet_size: Maximum request packet size in bytes. + * @max_response_packet_size: Maximum response packet size in bytes. + * @flags: see EC_PROTOCOL_INFO_* + */ struct ec_response_get_protocol_info { /* Fields which exist if at least protocol version 3 supported */ - - /* Bitmask of protocol versions supported (1 << n means version n)*/ uint32_t protocol_versions; - - /* Maximum request packet size, in bytes */ uint16_t max_request_packet_size; - - /* Maximum response packet size, in bytes */ uint16_t max_response_packet_size; - - /* Flags; see EC_PROTOCOL_INFO_* */ uint32_t flags; } __packed; @@ -708,8 +756,10 @@ struct ec_response_get_protocol_info { /* The upper byte of .flags tells what to do (nothing means "get") */ #define EC_GSV_SET 0x80000000 -/* The lower three bytes of .flags identifies the parameter, if that has - meaning for an individual command. */ +/* + * The lower three bytes of .flags identifies the parameter, if that has + * meaning for an individual command. + */ #define EC_GSV_PARAM_MASK 0x00ffffff struct ec_params_get_set_value { @@ -810,6 +860,7 @@ enum ec_feature_code { #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32)) #define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32)) + struct ec_response_get_features { uint32_t flags[2]; } __packed; @@ -820,24 +871,22 @@ struct ec_response_get_features { /* Get flash info */ #define EC_CMD_FLASH_INFO 0x10 -/* Version 0 returns these fields */ +/** + * struct ec_response_flash_info - Response to the flash info command. + * @flash_size: Usable flash size in bytes. + * @write_block_size: Write block size. Write offset and size must be a + * multiple of this. + * @erase_block_size: Erase block size. Erase offset and size must be a + * multiple of this. + * @protect_block_size: Protection block size. Protection offset and size + * must be a multiple of this. + * + * Version 0 returns these fields. + */ struct ec_response_flash_info { - /* Usable flash size, in bytes */ uint32_t flash_size; - /* - * Write block size. Write offset and size must be a multiple - * of this. - */ uint32_t write_block_size; - /* - * Erase block size. Erase offset and size must be a multiple - * of this. - */ uint32_t erase_block_size; - /* - * Protection block size. Protection offset and size must be a - * multiple of this. - */ uint32_t protect_block_size; } __packed; @@ -845,7 +894,22 @@ struct ec_response_flash_info { /* EC flash erases bits to 0 instead of 1 */ #define EC_FLASH_INFO_ERASE_TO_0 (1 << 0) -/* +/** + * struct ec_response_flash_info_1 - Response to the flash info v1 command. + * @flash_size: Usable flash size in bytes. + * @write_block_size: Write block size. Write offset and size must be a + * multiple of this. + * @erase_block_size: Erase block size. Erase offset and size must be a + * multiple of this. + * @protect_block_size: Protection block size. Protection offset and size + * must be a multiple of this. + * @write_ideal_size: Ideal write size in bytes. Writes will be fastest if + * size is exactly this and offset is a multiple of this. + * For example, an EC may have a write buffer which can do + * half-page operations if data is aligned, and a slower + * word-at-a-time write mode. + * @flags: Flags; see EC_FLASH_INFO_* + * * Version 1 returns the same initial fields as version 0, with additional * fields following. * @@ -860,15 +924,7 @@ struct ec_response_flash_info_1 { uint32_t protect_block_size; /* Version 1 adds these fields: */ - /* - * Ideal write size in bytes. Writes will be fastest if size is - * exactly this and offset is a multiple of this. For example, an EC - * may have a write buffer which can do half-page operations if data is - * aligned, and a slower word-at-a-time write mode. - */ uint32_t write_ideal_size; - - /* Flags; see EC_FLASH_INFO_* */ uint32_t flags; } __packed; @@ -879,9 +935,14 @@ struct ec_response_flash_info_1 { */ #define EC_CMD_FLASH_READ 0x11 +/** + * struct ec_params_flash_read - Parameters for the flash read command. + * @offset: Byte offset to read. + * @size: Size to read in bytes. + */ struct ec_params_flash_read { - uint32_t offset; /* Byte offset to read */ - uint32_t size; /* Size to read in bytes */ + uint32_t offset; + uint32_t size; } __packed; /* Write flash */ @@ -891,18 +952,28 @@ struct ec_params_flash_read { /* Version 0 of the flash command supported only 64 bytes of data */ #define EC_FLASH_WRITE_VER0_SIZE 64 +/** + * struct ec_params_flash_write - Parameters for the flash write command. + * @offset: Byte offset to write. + * @size: Size to write in bytes. + */ struct ec_params_flash_write { - uint32_t offset; /* Byte offset to write */ - uint32_t size; /* Size to write in bytes */ + uint32_t offset; + uint32_t size; /* Followed by data to write */ } __packed; /* Erase flash */ #define EC_CMD_FLASH_ERASE 0x13 +/** + * struct ec_params_flash_erase - Parameters for the flash erase command. + * @offset: Byte offset to erase. + * @size: Size to erase in bytes. + */ struct ec_params_flash_erase { - uint32_t offset; /* Byte offset to erase */ - uint32_t size; /* Size to erase in bytes */ + uint32_t offset; + uint32_t size; } __packed; /* @@ -941,21 +1012,28 @@ struct ec_params_flash_erase { /* Entile flash code protected when the EC boots */ #define EC_FLASH_PROTECT_ALL_AT_BOOT (1 << 6) +/** + * struct ec_params_flash_protect - Parameters for the flash protect command. + * @mask: Bits in flags to apply. + * @flags: New flags to apply. + */ struct ec_params_flash_protect { - uint32_t mask; /* Bits in flags to apply */ - uint32_t flags; /* New flags to apply */ + uint32_t mask; + uint32_t flags; } __packed; +/** + * struct ec_response_flash_protect - Response to the flash protect command. + * @flags: Current value of flash protect flags. + * @valid_flags: Flags which are valid on this platform. This allows the + * caller to distinguish between flags which aren't set vs. flags + * which can't be set on this platform. + * @writable_flags: Flags which can be changed given the current protection + * state. + */ struct ec_response_flash_protect { - /* Current value of flash protect flags */ uint32_t flags; - /* - * Flags which are valid on this platform. This allows the caller - * to distinguish between flags which aren't set vs. flags which can't - * be set on this platform. - */ uint32_t valid_flags; - /* Flags which can be changed given the current protection state */ uint32_t writable_flags; } __packed; @@ -982,8 +1060,13 @@ enum ec_flash_region { EC_FLASH_REGION_COUNT, }; +/** + * struct ec_params_flash_region_info - Parameters for the flash region info + * command. + * @region: Flash region; see EC_FLASH_REGION_* + */ struct ec_params_flash_region_info { - uint32_t region; /* enum ec_flash_region */ + uint32_t region; } __packed; struct ec_response_flash_region_info { @@ -1094,7 +1177,9 @@ struct rgb_s { }; #define LB_BATTERY_LEVELS 4 -/* List of tweakable parameters. NOTE: It's __packed so it can be sent in a + +/* + * List of tweakable parameters. NOTE: It's __packed so it can be sent in a * host command, but the alignment is the same regardless. Keep it that way. */ struct lightbar_params_v0 { @@ -2132,6 +2217,7 @@ struct ec_response_get_next_event_v1 { /* Switches */ #define EC_MKBP_LID_OPEN 0 #define EC_MKBP_TABLET_MODE 1 +#define EC_MKBP_BASE_ATTACHED 2 /*****************************************************************************/ /* Temperature sensor commands */ @@ -3102,6 +3188,16 @@ struct ec_params_usb_pd_info_request { uint8_t port; } __packed; +/* + * This command will return the number of USB PD charge port + the number + * of dedicated port present. + * EC_CMD_USB_PD_PORTS does NOT include the dedicated ports + */ +#define EC_CMD_CHARGE_PORT_COUNT 0x0105 +struct ec_response_charge_port_count { + uint8_t port_count; +} __packed; + /* Read USB-PD Device discovery info */ #define EC_CMD_USB_PD_DISCOVERY 0x0113 struct ec_params_usb_pd_discovery_entry { diff --git a/include/linux/mfd/cros_ec_lpc_mec.h b/include/linux/mfd/cros_ec_lpc_mec.h deleted file mode 100644 index 176496ddc66c..000000000000 --- a/include/linux/mfd/cros_ec_lpc_mec.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * cros_ec_lpc_mec - LPC variant I/O for Microchip EC - * - * Copyright (C) 2016 Google, Inc - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * This driver uses the Chrome OS EC byte-level message-based protocol for - * communicating the keyboard state (which keys are pressed) from a keyboard EC - * to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing, - * but everything else (including deghosting) is done here. The main - * motivation for this is to keep the EC firmware as simple as possible, since - * it cannot be easily upgraded and EC flash/IRAM space is relatively - * expensive. - */ - -#ifndef __LINUX_MFD_CROS_EC_MEC_H -#define __LINUX_MFD_CROS_EC_MEC_H - -#include <linux/mfd/cros_ec_commands.h> - -enum cros_ec_lpc_mec_emi_access_mode { - /* 8-bit access */ - ACCESS_TYPE_BYTE = 0x0, - /* 16-bit access */ - ACCESS_TYPE_WORD = 0x1, - /* 32-bit access */ - ACCESS_TYPE_LONG = 0x2, - /* - * 32-bit access, read or write of MEC_EMI_EC_DATA_B3 causes the - * EC data register to be incremented. - */ - ACCESS_TYPE_LONG_AUTO_INCREMENT = 0x3, -}; - -enum cros_ec_lpc_mec_io_type { - MEC_IO_READ, - MEC_IO_WRITE, -}; - -/* Access IO ranges 0x800 thru 0x9ff using EMI interface instead of LPC */ -#define MEC_EMI_RANGE_START EC_HOST_CMD_REGION0 -#define MEC_EMI_RANGE_END (EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE) - -/* EMI registers are relative to base */ -#define MEC_EMI_BASE 0x800 -#define MEC_EMI_HOST_TO_EC (MEC_EMI_BASE + 0) -#define MEC_EMI_EC_TO_HOST (MEC_EMI_BASE + 1) -#define MEC_EMI_EC_ADDRESS_B0 (MEC_EMI_BASE + 2) -#define MEC_EMI_EC_ADDRESS_B1 (MEC_EMI_BASE + 3) -#define MEC_EMI_EC_DATA_B0 (MEC_EMI_BASE + 4) -#define MEC_EMI_EC_DATA_B1 (MEC_EMI_BASE + 5) -#define MEC_EMI_EC_DATA_B2 (MEC_EMI_BASE + 6) -#define MEC_EMI_EC_DATA_B3 (MEC_EMI_BASE + 7) - -/* - * cros_ec_lpc_mec_init - * - * Initialize MEC I/O. - */ -void cros_ec_lpc_mec_init(void); - -/* - * cros_ec_lpc_mec_destroy - * - * Cleanup MEC I/O. - */ -void cros_ec_lpc_mec_destroy(void); - -/** - * cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port - * - * @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request - * @offset: Base read / write address - * @length: Number of bytes to read / write - * @buf: Destination / source buffer - * - * @return 8-bit checksum of all bytes read / written - */ -u8 cros_ec_lpc_io_bytes_mec(enum cros_ec_lpc_mec_io_type io_type, - unsigned int offset, unsigned int length, u8 *buf); - -#endif /* __LINUX_MFD_CROS_EC_MEC_H */ diff --git a/include/linux/mfd/cros_ec_lpc_reg.h b/include/linux/mfd/cros_ec_lpc_reg.h deleted file mode 100644 index 5560bef63c2b..000000000000 --- a/include/linux/mfd/cros_ec_lpc_reg.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * cros_ec_lpc_reg - LPC access to the Chrome OS Embedded Controller - * - * Copyright (C) 2016 Google, Inc - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * This driver uses the Chrome OS EC byte-level message-based protocol for - * communicating the keyboard state (which keys are pressed) from a keyboard EC - * to the AP over some bus (such as i2c, lpc, spi). The EC does debouncing, - * but everything else (including deghosting) is done here. The main - * motivation for this is to keep the EC firmware as simple as possible, since - * it cannot be easily upgraded and EC flash/IRAM space is relatively - * expensive. - */ - -#ifndef __LINUX_MFD_CROS_EC_REG_H -#define __LINUX_MFD_CROS_EC_REG_H - -/** - * cros_ec_lpc_read_bytes - Read bytes from a given LPC-mapped address. - * Returns 8-bit checksum of all bytes read. - * - * @offset: Base read address - * @length: Number of bytes to read - * @dest: Destination buffer - */ -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest); - -/** - * cros_ec_lpc_write_bytes - Write bytes to a given LPC-mapped address. - * Returns 8-bit checksum of all bytes written. - * - * @offset: Base write address - * @length: Number of bytes to write - * @msg: Write data buffer - */ -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg); - -/** - * cros_ec_lpc_reg_init - * - * Initialize register I/O. - */ -void cros_ec_lpc_reg_init(void); - -/** - * cros_ec_lpc_reg_destroy - * - * Cleanup reg I/O. - */ -void cros_ec_lpc_reg_destroy(void); - -#endif /* __LINUX_MFD_CROS_EC_REG_H */ diff --git a/include/linux/mfd/ingenic-tcu.h b/include/linux/mfd/ingenic-tcu.h new file mode 100644 index 000000000000..ab16ad283def --- /dev/null +++ b/include/linux/mfd/ingenic-tcu.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Header file for the Ingenic JZ47xx TCU driver + */ +#ifndef __LINUX_MFD_INGENIC_TCU_H_ +#define __LINUX_MFD_INGENIC_TCU_H_ + +#include <linux/bitops.h> + +#define TCU_REG_WDT_TDR 0x00 +#define TCU_REG_WDT_TCER 0x04 +#define TCU_REG_WDT_TCNT 0x08 +#define TCU_REG_WDT_TCSR 0x0c +#define TCU_REG_TER 0x10 +#define TCU_REG_TESR 0x14 +#define TCU_REG_TECR 0x18 +#define TCU_REG_TSR 0x1c +#define TCU_REG_TFR 0x20 +#define TCU_REG_TFSR 0x24 +#define TCU_REG_TFCR 0x28 +#define TCU_REG_TSSR 0x2c +#define TCU_REG_TMR 0x30 +#define TCU_REG_TMSR 0x34 +#define TCU_REG_TMCR 0x38 +#define TCU_REG_TSCR 0x3c +#define TCU_REG_TDFR0 0x40 +#define TCU_REG_TDHR0 0x44 +#define TCU_REG_TCNT0 0x48 +#define TCU_REG_TCSR0 0x4c +#define TCU_REG_OST_DR 0xe0 +#define TCU_REG_OST_CNTL 0xe4 +#define TCU_REG_OST_CNTH 0xe8 +#define TCU_REG_OST_TCSR 0xec +#define TCU_REG_TSTR 0xf0 +#define TCU_REG_TSTSR 0xf4 +#define TCU_REG_TSTCR 0xf8 +#define TCU_REG_OST_CNTHBUF 0xfc + +#define TCU_TCSR_RESERVED_BITS 0x3f +#define TCU_TCSR_PARENT_CLOCK_MASK 0x07 +#define TCU_TCSR_PRESCALE_LSB 3 +#define TCU_TCSR_PRESCALE_MASK 0x38 + +#define TCU_TCSR_PWM_SD BIT(9) /* 0: Shutdown abruptly 1: gracefully */ +#define TCU_TCSR_PWM_INITL_HIGH BIT(8) /* Sets the initial output level */ +#define TCU_TCSR_PWM_EN BIT(7) /* PWM pin output enable */ + +#define TCU_WDT_TCER_TCEN BIT(0) /* Watchdog timer enable */ + +#define TCU_CHANNEL_STRIDE 0x10 +#define TCU_REG_TDFRc(c) (TCU_REG_TDFR0 + ((c) * TCU_CHANNEL_STRIDE)) +#define TCU_REG_TDHRc(c) (TCU_REG_TDHR0 + ((c) * TCU_CHANNEL_STRIDE)) +#define TCU_REG_TCNTc(c) (TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE)) +#define TCU_REG_TCSRc(c) (TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE)) + +#endif /* __LINUX_MFD_INGENIC_TCU_H_ */ diff --git a/include/linux/mfd/intel_msic.h b/include/linux/mfd/intel_msic.h index 439a7a617bc9..317e8608cf41 100644 --- a/include/linux/mfd/intel_msic.h +++ b/include/linux/mfd/intel_msic.h @@ -1,12 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* - * include/linux/mfd/intel_msic.h - Core interface for Intel MSIC + * Core interface for Intel MSIC * * Copyright (C) 2011, Intel Corporation * Author: Mika Westerberg <mika.westerberg@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __LINUX_MFD_INTEL_MSIC_H__ diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h index 5aacdb017a9f..ed1dfba5e5f9 100644 --- a/include/linux/mfd/intel_soc_pmic.h +++ b/include/linux/mfd/intel_soc_pmic.h @@ -1,17 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* - * intel_soc_pmic.h - Intel SoC PMIC Driver + * Intel SoC PMIC Driver * * Copyright (C) 2012-2014 Intel Corporation. All rights reserved. * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * * Author: Yang, Bin <bin.yang@intel.com> * Author: Zhu, Lejun <lejun.zhu@linux.intel.com> */ @@ -25,6 +17,7 @@ struct intel_soc_pmic { int irq; struct regmap *regmap; struct regmap_irq_chip_data *irq_chip_data; + struct regmap_irq_chip_data *irq_chip_data_pwrbtn; struct regmap_irq_chip_data *irq_chip_data_tmu; struct regmap_irq_chip_data *irq_chip_data_bcu; struct regmap_irq_chip_data *irq_chip_data_adc; diff --git a/include/linux/mfd/intel_soc_pmic_bxtwc.h b/include/linux/mfd/intel_soc_pmic_bxtwc.h index 0c351bc85d2d..9be566cc58c6 100644 --- a/include/linux/mfd/intel_soc_pmic_bxtwc.h +++ b/include/linux/mfd/intel_soc_pmic_bxtwc.h @@ -1,16 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * Header file for Intel Broxton Whiskey Cove PMIC * * Copyright (C) 2015 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. */ #ifndef __INTEL_BXTWC_H__ diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h index c332681848ef..fe69c0f4398f 100644 --- a/include/linux/mfd/madera/core.h +++ b/include/linux/mfd/madera/core.h @@ -148,6 +148,7 @@ struct snd_soc_dapm_context; * @internal_dcvdd: true if DCVDD is supplied from the internal LDO1 * @pdata: our pdata * @irq_dev: the irqchip child driver device + * @irq_data: pointer to irqchip data for the child irqchip driver * @irq: host irq number from SPI or I2C configuration * @out_clamp: indicates output clamp state for each analogue output * @out_shorted: indicates short circuit state for each analogue output @@ -175,6 +176,7 @@ struct madera { struct madera_pdata pdata; struct device *irq_dev; + struct regmap_irq_chip_data *irq_data; int irq; unsigned int num_micbias; diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h index 0b311f39c8f4..8dc852402dbb 100644 --- a/include/linux/mfd/madera/pdata.h +++ b/include/linux/mfd/madera/pdata.h @@ -24,7 +24,6 @@ struct gpio_desc; struct pinctrl_map; -struct madera_irqchip_pdata; struct madera_codec_pdata; /** diff --git a/include/linux/mfd/max14577-private.h b/include/linux/mfd/max14577-private.h index df75234f979d..a21374f8ad26 100644 --- a/include/linux/mfd/max14577-private.h +++ b/include/linux/mfd/max14577-private.h @@ -1,19 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max14577-private.h - Common API for the Maxim 14577/77836 internal sub chip * * Copyright (C) 2014 Samsung Electrnoics * Chanwoo Choi <cw00.choi@samsung.com> * Krzysztof Kozlowski <krzk@kernel.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __MAX14577_PRIVATE_H__ diff --git a/include/linux/mfd/max14577.h b/include/linux/mfd/max14577.h index d81b52bb8bee..8b3ef891ba42 100644 --- a/include/linux/mfd/max14577.h +++ b/include/linux/mfd/max14577.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max14577.h - Driver for the Maxim 14577/77836 * @@ -5,16 +6,6 @@ * Chanwoo Choi <cw00.choi@samsung.com> * Krzysztof Kozlowski <krzk@kernel.org> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * * This driver is based on max8997.h * * MAX14577 has MUIC, Charger devices. diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index 643dae777b43..833e578e051e 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max77686-private.h - Voltage regulator driver for the Maxim 77686/802 * * Copyright (C) 2012 Samsung Electrnoics * Chiwoong Byun <woong.byun@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_MFD_MAX77686_PRIV_H diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h index d4b72d519115..d0fb510875e6 100644 --- a/include/linux/mfd/max77686.h +++ b/include/linux/mfd/max77686.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max77686.h - Driver for the Maxim 77686/802 * * Copyright (C) 2012 Samsung Electrnoics * Chiwoong Byun <woong.byun@samsung.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * This driver is based on max8997.h * * MAX77686 has PMIC, RTC devices. diff --git a/include/linux/mfd/max77693-common.h b/include/linux/mfd/max77693-common.h index 095b121aa725..a5bce099f1ed 100644 --- a/include/linux/mfd/max77693-common.h +++ b/include/linux/mfd/max77693-common.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Common data shared between Maxim 77693 and 77843 drivers * * Copyright (C) 2015 Samsung Electronics - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __LINUX_MFD_MAX77693_COMMON_H diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 3c7a63b98ad6..e798c81aec31 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max77693-private.h - Voltage regulator driver for the Maxim 77693 * @@ -5,20 +6,6 @@ * SangYoung Son <hello.son@samsung.com> * * This program is not provided / owned by Maxim Integrated Products. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_MFD_MAX77693_PRIV_H diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h index d450f687301b..c67c16ba8649 100644 --- a/include/linux/mfd/max77693.h +++ b/include/linux/mfd/max77693.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max77693.h - Driver for the Maxim 77693 * @@ -6,20 +7,6 @@ * * This program is not provided / owned by Maxim Integrated Products. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * This driver is based on max8997.h * * MAX77693 has PMIC, Charger, Flash LED, Haptic, MUIC devices. diff --git a/include/linux/mfd/max77843-private.h b/include/linux/mfd/max77843-private.h index b8908bf8d315..0bc7454c4dbe 100644 --- a/include/linux/mfd/max77843-private.h +++ b/include/linux/mfd/max77843-private.h @@ -1,14 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Common variables for the Maxim MAX77843 driver * * Copyright (C) 2015 Samsung Electronics * Author: Jaewon Kim <jaewon02.kim@samsung.com> * Author: Beomho Seo <beomho.seo@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. */ #ifndef __MAX77843_PRIVATE_H_ diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 78c76cd4d37b..a10cd6945232 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -1,22 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max8997-private.h - Voltage regulator driver for the Maxim 8997 * * Copyright (C) 2010 Samsung Electrnoics * MyungJoo Ham <myungjoo.ham@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_MFD_MAX8997_PRIV_H diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index cf815577bd68..e955e2f0a2cc 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max8997.h - Driver for the Maxim 8997/8966 * * Copyright (C) 2009-2010 Samsung Electrnoics * MyungJoo Ham <myungjoo.ham@samsung.com> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * This driver is based on max8998.h * * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices. @@ -178,7 +165,6 @@ struct max8997_led_platform_data { struct max8997_platform_data { /* IRQ */ int ono; - int wakeup; /* ---- PMIC ---- */ struct max8997_regulator_data *regulators; diff --git a/include/linux/mfd/max8998-private.h b/include/linux/mfd/max8998-private.h index d68ada502ff3..6deb5f577602 100644 --- a/include/linux/mfd/max8998-private.h +++ b/include/linux/mfd/max8998-private.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max8998-private.h - Voltage regulator driver for the Maxim 8998 * * Copyright (C) 2009-2010 Samsung Electrnoics * Kyungmin Park <kyungmin.park@samsung.com> * Marek Szyprowski <m.szyprowski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_MFD_MAX8998_PRIV_H diff --git a/include/linux/mfd/max8998.h b/include/linux/mfd/max8998.h index e3956a654cbc..061af220dcd3 100644 --- a/include/linux/mfd/max8998.h +++ b/include/linux/mfd/max8998.h @@ -1,23 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * max8998.h - Voltage regulator driver for the Maxim 8998 * * Copyright (C) 2009-2010 Samsung Electrnoics * Kyungmin Park <kyungmin.park@samsung.com> * Marek Szyprowski <m.szyprowski@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __LINUX_MFD_MAX8998_H diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index 54a3cd808f9e..2ad9bdc0a5ec 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -249,6 +249,7 @@ struct mc13xxx_platform_data { #define MC13XXX_ADC0_TSMOD0 (1 << 12) #define MC13XXX_ADC0_TSMOD1 (1 << 13) #define MC13XXX_ADC0_TSMOD2 (1 << 14) +#define MC13XXX_ADC0_CHRGRAWDIV (1 << 15) #define MC13XXX_ADC0_ADINC1 (1 << 16) #define MC13XXX_ADC0_ADINC2 (1 << 17) diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h index e8338e5dc10b..fd194bfc836f 100644 --- a/include/linux/mfd/rohm-bd718x7.h +++ b/include/linux/mfd/rohm-bd718x7.h @@ -1,112 +1,127 @@ /* SPDX-License-Identifier: GPL-2.0-or-later */ /* Copyright (C) 2018 ROHM Semiconductors */ -#ifndef __LINUX_MFD_BD71837_H__ -#define __LINUX_MFD_BD71837_H__ +#ifndef __LINUX_MFD_BD718XX_H__ +#define __LINUX_MFD_BD718XX_H__ #include <linux/regmap.h> enum { - BD71837_BUCK1 = 0, - BD71837_BUCK2, - BD71837_BUCK3, - BD71837_BUCK4, - BD71837_BUCK5, - BD71837_BUCK6, - BD71837_BUCK7, - BD71837_BUCK8, - BD71837_LDO1, - BD71837_LDO2, - BD71837_LDO3, - BD71837_LDO4, - BD71837_LDO5, - BD71837_LDO6, - BD71837_LDO7, - BD71837_REGULATOR_CNT, + BD718XX_TYPE_BD71837 = 0, + BD718XX_TYPE_BD71847, + BD718XX_TYPE_AMOUNT }; -#define BD71837_BUCK1_VOLTAGE_NUM 0x40 -#define BD71837_BUCK2_VOLTAGE_NUM 0x40 -#define BD71837_BUCK3_VOLTAGE_NUM 0x40 -#define BD71837_BUCK4_VOLTAGE_NUM 0x40 +enum { + BD718XX_BUCK1 = 0, + BD718XX_BUCK2, + BD718XX_BUCK3, + BD718XX_BUCK4, + BD718XX_BUCK5, + BD718XX_BUCK6, + BD718XX_BUCK7, + BD718XX_BUCK8, + BD718XX_LDO1, + BD718XX_LDO2, + BD718XX_LDO3, + BD718XX_LDO4, + BD718XX_LDO5, + BD718XX_LDO6, + BD718XX_LDO7, + BD718XX_REGULATOR_AMOUNT, +}; + +/* Common voltage configurations */ +#define BD718XX_DVS_BUCK_VOLTAGE_NUM 0x3D +#define BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM 0x3D -#define BD71837_BUCK5_VOLTAGE_NUM 0x08 +#define BD718XX_LDO1_VOLTAGE_NUM 0x08 +#define BD718XX_LDO2_VOLTAGE_NUM 0x02 +#define BD718XX_LDO3_VOLTAGE_NUM 0x10 +#define BD718XX_LDO4_VOLTAGE_NUM 0x0A +#define BD718XX_LDO6_VOLTAGE_NUM 0x0A + +/* BD71837 specific voltage configurations */ +#define BD71837_BUCK5_VOLTAGE_NUM 0x10 #define BD71837_BUCK6_VOLTAGE_NUM 0x04 #define BD71837_BUCK7_VOLTAGE_NUM 0x08 -#define BD71837_BUCK8_VOLTAGE_NUM 0x40 - -#define BD71837_LDO1_VOLTAGE_NUM 0x04 -#define BD71837_LDO2_VOLTAGE_NUM 0x02 -#define BD71837_LDO3_VOLTAGE_NUM 0x10 -#define BD71837_LDO4_VOLTAGE_NUM 0x10 #define BD71837_LDO5_VOLTAGE_NUM 0x10 -#define BD71837_LDO6_VOLTAGE_NUM 0x10 #define BD71837_LDO7_VOLTAGE_NUM 0x10 +/* BD71847 specific voltage configurations */ +#define BD71847_BUCK3_VOLTAGE_NUM 0x18 +#define BD71847_BUCK4_VOLTAGE_NUM 0x08 +#define BD71847_LDO5_VOLTAGE_NUM 0x20 + +/* Registers specific to BD71837 */ enum { - BD71837_REG_REV = 0x00, - BD71837_REG_SWRESET = 0x01, - BD71837_REG_I2C_DEV = 0x02, - BD71837_REG_PWRCTRL0 = 0x03, - BD71837_REG_PWRCTRL1 = 0x04, - BD71837_REG_BUCK1_CTRL = 0x05, - BD71837_REG_BUCK2_CTRL = 0x06, - BD71837_REG_BUCK3_CTRL = 0x07, - BD71837_REG_BUCK4_CTRL = 0x08, - BD71837_REG_BUCK5_CTRL = 0x09, - BD71837_REG_BUCK6_CTRL = 0x0A, - BD71837_REG_BUCK7_CTRL = 0x0B, - BD71837_REG_BUCK8_CTRL = 0x0C, - BD71837_REG_BUCK1_VOLT_RUN = 0x0D, - BD71837_REG_BUCK1_VOLT_IDLE = 0x0E, - BD71837_REG_BUCK1_VOLT_SUSP = 0x0F, - BD71837_REG_BUCK2_VOLT_RUN = 0x10, - BD71837_REG_BUCK2_VOLT_IDLE = 0x11, - BD71837_REG_BUCK3_VOLT_RUN = 0x12, - BD71837_REG_BUCK4_VOLT_RUN = 0x13, - BD71837_REG_BUCK5_VOLT = 0x14, - BD71837_REG_BUCK6_VOLT = 0x15, - BD71837_REG_BUCK7_VOLT = 0x16, - BD71837_REG_BUCK8_VOLT = 0x17, - BD71837_REG_LDO1_VOLT = 0x18, - BD71837_REG_LDO2_VOLT = 0x19, - BD71837_REG_LDO3_VOLT = 0x1A, - BD71837_REG_LDO4_VOLT = 0x1B, - BD71837_REG_LDO5_VOLT = 0x1C, - BD71837_REG_LDO6_VOLT = 0x1D, - BD71837_REG_LDO7_VOLT = 0x1E, - BD71837_REG_TRANS_COND0 = 0x1F, - BD71837_REG_TRANS_COND1 = 0x20, - BD71837_REG_VRFAULTEN = 0x21, - BD718XX_REG_MVRFLTMASK0 = 0x22, - BD718XX_REG_MVRFLTMASK1 = 0x23, - BD718XX_REG_MVRFLTMASK2 = 0x24, - BD71837_REG_RCVCFG = 0x25, - BD71837_REG_RCVNUM = 0x26, - BD71837_REG_PWRONCONFIG0 = 0x27, - BD71837_REG_PWRONCONFIG1 = 0x28, - BD71837_REG_RESETSRC = 0x29, - BD71837_REG_MIRQ = 0x2A, - BD71837_REG_IRQ = 0x2B, - BD71837_REG_IN_MON = 0x2C, - BD71837_REG_POW_STATE = 0x2D, - BD71837_REG_OUT32K = 0x2E, - BD71837_REG_REGLOCK = 0x2F, - BD71837_REG_OTPVER = 0xFF, - BD71837_MAX_REGISTER = 0x100, + BD71837_REG_BUCK3_CTRL = 0x07, + BD71837_REG_BUCK4_CTRL = 0x08, + BD71837_REG_BUCK3_VOLT_RUN = 0x12, + BD71837_REG_BUCK4_VOLT_RUN = 0x13, + BD71837_REG_LDO7_VOLT = 0x1E, +}; + +/* Registers common for BD71837 and BD71847 */ +enum { + BD718XX_REG_REV = 0x00, + BD718XX_REG_SWRESET = 0x01, + BD718XX_REG_I2C_DEV = 0x02, + BD718XX_REG_PWRCTRL0 = 0x03, + BD718XX_REG_PWRCTRL1 = 0x04, + BD718XX_REG_BUCK1_CTRL = 0x05, + BD718XX_REG_BUCK2_CTRL = 0x06, + BD718XX_REG_1ST_NODVS_BUCK_CTRL = 0x09, + BD718XX_REG_2ND_NODVS_BUCK_CTRL = 0x0A, + BD718XX_REG_3RD_NODVS_BUCK_CTRL = 0x0B, + BD718XX_REG_4TH_NODVS_BUCK_CTRL = 0x0C, + BD718XX_REG_BUCK1_VOLT_RUN = 0x0D, + BD718XX_REG_BUCK1_VOLT_IDLE = 0x0E, + BD718XX_REG_BUCK1_VOLT_SUSP = 0x0F, + BD718XX_REG_BUCK2_VOLT_RUN = 0x10, + BD718XX_REG_BUCK2_VOLT_IDLE = 0x11, + BD718XX_REG_1ST_NODVS_BUCK_VOLT = 0x14, + BD718XX_REG_2ND_NODVS_BUCK_VOLT = 0x15, + BD718XX_REG_3RD_NODVS_BUCK_VOLT = 0x16, + BD718XX_REG_4TH_NODVS_BUCK_VOLT = 0x17, + BD718XX_REG_LDO1_VOLT = 0x18, + BD718XX_REG_LDO2_VOLT = 0x19, + BD718XX_REG_LDO3_VOLT = 0x1A, + BD718XX_REG_LDO4_VOLT = 0x1B, + BD718XX_REG_LDO5_VOLT = 0x1C, + BD718XX_REG_LDO6_VOLT = 0x1D, + BD718XX_REG_TRANS_COND0 = 0x1F, + BD718XX_REG_TRANS_COND1 = 0x20, + BD718XX_REG_VRFAULTEN = 0x21, + BD718XX_REG_MVRFLTMASK0 = 0x22, + BD718XX_REG_MVRFLTMASK1 = 0x23, + BD718XX_REG_MVRFLTMASK2 = 0x24, + BD718XX_REG_RCVCFG = 0x25, + BD718XX_REG_RCVNUM = 0x26, + BD718XX_REG_PWRONCONFIG0 = 0x27, + BD718XX_REG_PWRONCONFIG1 = 0x28, + BD718XX_REG_RESETSRC = 0x29, + BD718XX_REG_MIRQ = 0x2A, + BD718XX_REG_IRQ = 0x2B, + BD718XX_REG_IN_MON = 0x2C, + BD718XX_REG_POW_STATE = 0x2D, + BD718XX_REG_OUT32K = 0x2E, + BD718XX_REG_REGLOCK = 0x2F, + BD718XX_REG_OTPVER = 0xFF, + BD718XX_MAX_REGISTER = 0x100, }; #define REGLOCK_PWRSEQ 0x1 #define REGLOCK_VREG 0x10 /* Generic BUCK control masks */ -#define BD71837_BUCK_SEL 0x02 -#define BD71837_BUCK_EN 0x01 -#define BD71837_BUCK_RUN_ON 0x04 +#define BD718XX_BUCK_SEL 0x02 +#define BD718XX_BUCK_EN 0x01 +#define BD718XX_BUCK_RUN_ON 0x04 /* Generic LDO masks */ -#define BD71837_LDO_SEL 0x80 -#define BD71837_LDO_EN 0x40 +#define BD718XX_LDO_SEL 0x80 +#define BD718XX_LDO_EN 0x40 /* BD71837 BUCK ramp rate CTRL reg bits */ #define BUCK_RAMPRATE_MASK 0xC0 @@ -115,49 +130,35 @@ enum { #define BUCK_RAMPRATE_2P50MV 0x2 #define BUCK_RAMPRATE_1P25MV 0x3 -/* BD71837_REG_BUCK1_VOLT_RUN bits */ -#define BUCK1_RUN_MASK 0x3F -#define BUCK1_RUN_DEFAULT 0x14 - -/* BD71837_REG_BUCK1_VOLT_SUSP bits */ -#define BUCK1_SUSP_MASK 0x3F -#define BUCK1_SUSP_DEFAULT 0x14 +#define DVS_BUCK_RUN_MASK 0x3F +#define DVS_BUCK_SUSP_MASK 0x3F +#define DVS_BUCK_IDLE_MASK 0x3F -/* BD71837_REG_BUCK1_VOLT_IDLE bits */ -#define BUCK1_IDLE_MASK 0x3F -#define BUCK1_IDLE_DEFAULT 0x14 +#define BD718XX_1ST_NODVS_BUCK_MASK 0x07 +#define BD718XX_3RD_NODVS_BUCK_MASK 0x07 +#define BD718XX_4TH_NODVS_BUCK_MASK 0x3F -/* BD71837_REG_BUCK2_VOLT_RUN bits */ -#define BUCK2_RUN_MASK 0x3F -#define BUCK2_RUN_DEFAULT 0x1E +#define BD71847_BUCK3_MASK 0x07 +#define BD71847_BUCK3_RANGE_MASK 0xC0 +#define BD71847_BUCK4_MASK 0x03 +#define BD71847_BUCK4_RANGE_MASK 0x40 -/* BD71837_REG_BUCK2_VOLT_IDLE bits */ -#define BUCK2_IDLE_MASK 0x3F -#define BUCK2_IDLE_DEFAULT 0x14 +#define BD71837_BUCK5_MASK 0x07 +#define BD71837_BUCK5_RANGE_MASK 0x80 +#define BD71837_BUCK6_MASK 0x03 -/* BD71837_REG_BUCK3_VOLT_RUN bits */ -#define BUCK3_RUN_MASK 0x3F -#define BUCK3_RUN_DEFAULT 0x1E +#define BD718XX_LDO1_MASK 0x03 +#define BD718XX_LDO1_RANGE_MASK 0x20 +#define BD718XX_LDO2_MASK 0x20 +#define BD718XX_LDO3_MASK 0x0F +#define BD718XX_LDO4_MASK 0x0F +#define BD718XX_LDO6_MASK 0x0F -/* BD71837_REG_BUCK4_VOLT_RUN bits */ -#define BUCK4_RUN_MASK 0x3F -#define BUCK4_RUN_DEFAULT 0x1E +#define BD71837_LDO5_MASK 0x0F +#define BD71847_LDO5_MASK 0x0F +#define BD71847_LDO5_RANGE_MASK 0x20 -/* BD71837_REG_BUCK5_VOLT bits */ -#define BUCK5_MASK 0x07 -#define BUCK5_DEFAULT 0x02 - -/* BD71837_REG_BUCK6_VOLT bits */ -#define BUCK6_MASK 0x03 -#define BUCK6_DEFAULT 0x03 - -/* BD71837_REG_BUCK7_VOLT bits */ -#define BUCK7_MASK 0x07 -#define BUCK7_DEFAULT 0x03 - -/* BD71837_REG_BUCK8_VOLT bits */ -#define BUCK8_MASK 0x3F -#define BUCK8_DEFAULT 0x1E +#define BD71837_LDO7_MASK 0x0F /* BD718XX Voltage monitoring masks */ #define BD718XX_BUCK1_VRMON80 0x1 @@ -186,7 +187,7 @@ enum { #define BD71837_BUCK4_VRMON130 0x80 #define BD71837_LDO7_VRMON80 0x40 -/* BD71837_REG_IRQ bits */ +/* BD718XX_REG_IRQ bits */ #define IRQ_SWRST 0x40 #define IRQ_PWRON_S 0x20 #define IRQ_PWRON_L 0x10 @@ -195,52 +196,31 @@ enum { #define IRQ_ON_REQ 0x02 #define IRQ_STBY_REQ 0x01 -/* BD71837_REG_OUT32K bits */ -#define BD71837_OUT32K_EN 0x01 +/* BD718XX_REG_OUT32K bits */ +#define BD718XX_OUT32K_EN 0x01 -/* BD71837 gated clock rate */ -#define BD71837_CLK_RATE 32768 +/* BD7183XX gated clock rate */ +#define BD718XX_CLK_RATE 32768 -/* ROHM BD71837 irqs */ +/* ROHM BD718XX irqs */ enum { - BD71837_INT_STBY_REQ, - BD71837_INT_ON_REQ, - BD71837_INT_WDOG, - BD71837_INT_PWRBTN, - BD71837_INT_PWRBTN_L, - BD71837_INT_PWRBTN_S, - BD71837_INT_SWRST + BD718XX_INT_STBY_REQ, + BD718XX_INT_ON_REQ, + BD718XX_INT_WDOG, + BD718XX_INT_PWRBTN, + BD718XX_INT_PWRBTN_L, + BD718XX_INT_PWRBTN_S, + BD718XX_INT_SWRST }; -/* ROHM BD71837 interrupt masks */ -#define BD71837_INT_SWRST_MASK 0x40 -#define BD71837_INT_PWRBTN_S_MASK 0x20 -#define BD71837_INT_PWRBTN_L_MASK 0x10 -#define BD71837_INT_PWRBTN_MASK 0x8 -#define BD71837_INT_WDOG_MASK 0x4 -#define BD71837_INT_ON_REQ_MASK 0x2 -#define BD71837_INT_STBY_REQ_MASK 0x1 - -/* BD71837_REG_LDO1_VOLT bits */ -#define LDO1_MASK 0x03 - -/* BD71837_REG_LDO1_VOLT bits */ -#define LDO2_MASK 0x20 - -/* BD71837_REG_LDO3_VOLT bits */ -#define LDO3_MASK 0x0F - -/* BD71837_REG_LDO4_VOLT bits */ -#define LDO4_MASK 0x0F - -/* BD71837_REG_LDO5_VOLT bits */ -#define LDO5_MASK 0x0F - -/* BD71837_REG_LDO6_VOLT bits */ -#define LDO6_MASK 0x0F - -/* BD71837_REG_LDO7_VOLT bits */ -#define LDO7_MASK 0x0F +/* ROHM BD718XX interrupt masks */ +#define BD718XX_INT_SWRST_MASK 0x40 +#define BD718XX_INT_PWRBTN_S_MASK 0x20 +#define BD718XX_INT_PWRBTN_L_MASK 0x10 +#define BD718XX_INT_PWRBTN_MASK 0x8 +#define BD718XX_INT_WDOG_MASK 0x4 +#define BD718XX_INT_ON_REQ_MASK 0x2 +#define BD718XX_INT_STBY_REQ_MASK 0x1 /* Register write induced reset settings */ @@ -250,13 +230,13 @@ enum { * write 1 to it we will trigger the action. So always write 0 to it when * changning SWRESET action - no matter what we read from it. */ -#define BD71837_SWRESET_TYPE_MASK 7 -#define BD71837_SWRESET_TYPE_DISABLED 0 -#define BD71837_SWRESET_TYPE_COLD 4 -#define BD71837_SWRESET_TYPE_WARM 6 +#define BD718XX_SWRESET_TYPE_MASK 7 +#define BD718XX_SWRESET_TYPE_DISABLED 0 +#define BD718XX_SWRESET_TYPE_COLD 4 +#define BD718XX_SWRESET_TYPE_WARM 6 -#define BD71837_SWRESET_RESET_MASK 1 -#define BD71837_SWRESET_RESET 1 +#define BD718XX_SWRESET_RESET_MASK 1 +#define BD718XX_SWRESET_RESET 1 /* Poweroff state transition conditions */ @@ -341,10 +321,10 @@ enum { BD718XX_PWRBTN_LONG_PRESS_15S }; -struct bd71837_pmic; -struct bd71837_clk; +struct bd718xx_clk; -struct bd71837 { +struct bd718xx { + unsigned int chip_type; struct device *dev; struct regmap *regmap; unsigned long int id; @@ -352,8 +332,7 @@ struct bd71837 { int chip_irq; struct regmap_irq_chip_data *irq_data; - struct bd71837_pmic *pmic; - struct bd71837_clk *clk; + struct bd718xx_clk *clk; }; -#endif /* __LINUX_MFD_BD71837_H__ */ +#endif /* __LINUX_MFD_BD718XX_H__ */ diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index 28f4ae76271d..3ca17eb89aa2 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -1,14 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* - * core.h - * - * copyright (c) 2011 Samsung Electronics Co., Ltd + * Copyright (c) 2011 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #ifndef __LINUX_MFD_SEC_CORE_H diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h index 667aa40486dd..6cfe4201a106 100644 --- a/include/linux/mfd/samsung/irq.h +++ b/include/linux/mfd/samsung/irq.h @@ -1,13 +1,7 @@ -/* irq.h - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2012 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #ifndef __LINUX_MFD_SEC_IRQ_H diff --git a/include/linux/mfd/samsung/rtc.h b/include/linux/mfd/samsung/rtc.h index 9ed2871ea335..0204decfc9aa 100644 --- a/include/linux/mfd/samsung/rtc.h +++ b/include/linux/mfd/samsung/rtc.h @@ -1,18 +1,7 @@ -/* rtc.h - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __LINUX_MFD_SEC_RTC_H diff --git a/include/linux/mfd/samsung/s2mpa01.h b/include/linux/mfd/samsung/s2mpa01.h index 2766108bca2f..0762e9de6f2f 100644 --- a/include/linux/mfd/samsung/s2mpa01.h +++ b/include/linux/mfd/samsung/s2mpa01.h @@ -1,12 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (c) 2013 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #ifndef __LINUX_MFD_S2MPA01_H diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h index 2c14eeca46f0..6e7668a389a1 100644 --- a/include/linux/mfd/samsung/s2mps11.h +++ b/include/linux/mfd/samsung/s2mps11.h @@ -1,14 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* - * s2mps11.h - * * Copyright (c) 2012 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #ifndef __LINUX_MFD_S2MPS11_H diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h index 239e977ba45d..b96d8a11dcd3 100644 --- a/include/linux/mfd/samsung/s2mps13.h +++ b/include/linux/mfd/samsung/s2mps13.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* - * s2mps13.h - * * Copyright (c) 2014 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __LINUX_MFD_S2MPS13_H diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h index c92f4782afb5..f4afa0cfc24f 100644 --- a/include/linux/mfd/samsung/s2mps14.h +++ b/include/linux/mfd/samsung/s2mps14.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* - * s2mps14.h - * * Copyright (c) 2014 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __LINUX_MFD_S2MPS14_H diff --git a/include/linux/mfd/samsung/s2mps15.h b/include/linux/mfd/samsung/s2mps15.h index 36d35287c3c0..eac6bf74b72e 100644 --- a/include/linux/mfd/samsung/s2mps15.h +++ b/include/linux/mfd/samsung/s2mps15.h @@ -1,16 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright (c) 2015 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #ifndef __LINUX_MFD_S2MPS15_H diff --git a/include/linux/mfd/samsung/s2mpu02.h b/include/linux/mfd/samsung/s2mpu02.h index 47ae9bc583a7..76cd5380cf0f 100644 --- a/include/linux/mfd/samsung/s2mpu02.h +++ b/include/linux/mfd/samsung/s2mpu02.h @@ -1,19 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ /* - * s2mpu02.h - * * Copyright (c) 2014 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __LINUX_MFD_S2MPU02_H diff --git a/include/linux/mfd/samsung/s5m8763.h b/include/linux/mfd/samsung/s5m8763.h index e025418e5589..c534f086ca16 100644 --- a/include/linux/mfd/samsung/s5m8763.h +++ b/include/linux/mfd/samsung/s5m8763.h @@ -1,13 +1,7 @@ -/* s5m8763.h - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2011 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #ifndef __LINUX_MFD_S5M8763_H diff --git a/include/linux/mfd/samsung/s5m8767.h b/include/linux/mfd/samsung/s5m8767.h index 243b58fec33d..704f8d80e96e 100644 --- a/include/linux/mfd/samsung/s5m8767.h +++ b/include/linux/mfd/samsung/s5m8767.h @@ -1,13 +1,7 @@ -/* s5m8767.h - * +/* SPDX-License-Identifier: GPL-2.0+ */ +/* * Copyright (c) 2011 Samsung Electronics Co., Ltd * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #ifndef __LINUX_MFD_S5M8767_H diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 09d5f30384e5..1ef51ed36be5 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -16,6 +16,7 @@ #include <linux/gpio.h> #include <linux/notifier.h> #include <linux/regmap.h> +#include <linux/gpio/consumer.h> /* Notifier event */ #define LMU_EVENT_MONITOR_DONE 0x01 @@ -81,7 +82,7 @@ enum lm363x_regulator_id { struct ti_lmu { struct device *dev; struct regmap *regmap; - int en_gpio; + struct gpio_desc *en_gpio; struct blocking_notifier_head notifier; }; #endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 77866214ab51..1e70060c92ce 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -62,13 +62,6 @@ #define TMIO_MMC_USE_GPIO_CD BIT(5) /* - * Some controllers doesn't have over 0x100 register. - * it is used to checking accessibility of - * CTL_SD_CARD_CLK_CTL / CTL_CLK_AND_WAIT_CTL - */ -#define TMIO_MMC_HAVE_HIGH_REG BIT(6) - -/* * Some controllers have CMD12 automatically * issue/non-issue register */ |
