diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/stm32-timers.h | 2 | ||||
| -rw-r--r-- | include/linux/mfd/tmio.h | 35 |
2 files changed, 19 insertions, 18 deletions
diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h index 4a0abbc10ef6..ce7346e7f77a 100644 --- a/include/linux/mfd/stm32-timers.h +++ b/include/linux/mfd/stm32-timers.h @@ -34,6 +34,7 @@ #define TIM_CR1_DIR BIT(4) /* Counter Direction */ #define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */ #define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */ +#define TIM_CR2_MMS2 GENMASK(23, 20) /* Master mode selection 2 */ #define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */ #define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */ #define TIM_DIER_UIE BIT(0) /* Update interrupt */ @@ -60,6 +61,7 @@ #define MAX_TIM_PSC 0xFFFF #define TIM_CR2_MMS_SHIFT 4 +#define TIM_CR2_MMS2_SHIFT 20 #define TIM_SMCR_TS_SHIFT 4 #define TIM_BDTR_BKF_MASK 0xF #define TIM_BDTR_BKF_SHIFT 16 diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index a1520d88ebf3..26e8f8c0a6db 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -13,15 +13,15 @@ #define tmio_ioread16(addr) readw(addr) #define tmio_ioread16_rep(r, b, l) readsw(r, b, l) #define tmio_ioread32(addr) \ - (((u32) readw((addr))) | (((u32) readw((addr) + 2)) << 16)) + (((u32)readw((addr))) | (((u32)readw((addr) + 2)) << 16)) #define tmio_iowrite8(val, addr) writeb((val), (addr)) #define tmio_iowrite16(val, addr) writew((val), (addr)) #define tmio_iowrite16_rep(r, b, l) writesw(r, b, l) #define tmio_iowrite32(val, addr) \ do { \ - writew((val), (addr)); \ - writew((val) >> 16, (addr) + 2); \ + writew((val), (addr)); \ + writew((val) >> 16, (addr) + 2); \ } while (0) #define CNF_CMD 0x04 @@ -55,57 +55,57 @@ } while (0) /* tmio MMC platform flags */ -#define TMIO_MMC_WRPROTECT_DISABLE (1 << 0) +#define TMIO_MMC_WRPROTECT_DISABLE BIT(0) /* * Some controllers can support a 2-byte block size when the bus width * is configured in 4-bit mode. */ -#define TMIO_MMC_BLKSZ_2BYTES (1 << 1) +#define TMIO_MMC_BLKSZ_2BYTES BIT(1) /* * Some controllers can support SDIO IRQ signalling. */ -#define TMIO_MMC_SDIO_IRQ (1 << 2) +#define TMIO_MMC_SDIO_IRQ BIT(2) -/* Some features are only available or tested on RCar Gen2 or later */ -#define TMIO_MMC_MIN_RCAR2 (1 << 3) +/* Some features are only available or tested on R-Car Gen2 or later */ +#define TMIO_MMC_MIN_RCAR2 BIT(3) /* * Some controllers require waiting for the SD bus to become * idle before writing to some registers. */ -#define TMIO_MMC_HAS_IDLE_WAIT (1 << 4) +#define TMIO_MMC_HAS_IDLE_WAIT BIT(4) /* * A GPIO is used for card hotplug detection. We need an extra flag for this, * because 0 is a valid GPIO number too, and requiring users to specify * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility. */ -#define TMIO_MMC_USE_GPIO_CD (1 << 5) +#define TMIO_MMC_USE_GPIO_CD BIT(5) /* * Some controllers doesn't have over 0x100 register. * it is used to checking accessibility of * CTL_SD_CARD_CLK_CTL / CTL_CLK_AND_WAIT_CTL */ -#define TMIO_MMC_HAVE_HIGH_REG (1 << 6) +#define TMIO_MMC_HAVE_HIGH_REG BIT(6) /* * Some controllers have CMD12 automatically * issue/non-issue register */ -#define TMIO_MMC_HAVE_CMD12_CTRL (1 << 7) +#define TMIO_MMC_HAVE_CMD12_CTRL BIT(7) /* Controller has some SDIO status bits which must be 1 */ -#define TMIO_MMC_SDIO_STATUS_SETBITS (1 << 8) +#define TMIO_MMC_SDIO_STATUS_SETBITS BIT(8) /* * Some controllers have a 32-bit wide data port register */ -#define TMIO_MMC_32BIT_DATA_PORT (1 << 9) +#define TMIO_MMC_32BIT_DATA_PORT BIT(9) /* * Some controllers allows to set SDx actual clock */ -#define TMIO_MMC_CLK_ACTUAL (1 << 10) +#define TMIO_MMC_CLK_ACTUAL BIT(10) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); @@ -146,9 +146,9 @@ struct tmio_nand_data { struct tmio_fb_data { int (*lcd_set_power)(struct platform_device *fb_dev, - bool on); + bool on); int (*lcd_mode)(struct platform_device *fb_dev, - const struct fb_videomode *mode); + const struct fb_videomode *mode); int num_modes; struct fb_videomode *modes; @@ -157,5 +157,4 @@ struct tmio_fb_data { int width; }; - #endif |
