diff options
Diffstat (limited to 'include/drm')
49 files changed, 1765 insertions, 819 deletions
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index ed599bea3f6c..182f83283e24 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -22,56 +22,56 @@ struct dw_hdmi; * 48bit bus. * * +----------------------+----------------------------------+------------------------------+ - * + Format Name + Format Code + Encodings + + * | Format Name | Format Code | Encodings | * +----------------------+----------------------------------+------------------------------+ - * + RGB 4:4:4 8bit + ``MEDIA_BUS_FMT_RGB888_1X24`` + ``V4L2_YCBCR_ENC_DEFAULT`` + + * | RGB 4:4:4 8bit | ``MEDIA_BUS_FMT_RGB888_1X24`` | ``V4L2_YCBCR_ENC_DEFAULT`` | * +----------------------+----------------------------------+------------------------------+ - * + RGB 4:4:4 10bits + ``MEDIA_BUS_FMT_RGB101010_1X30`` + ``V4L2_YCBCR_ENC_DEFAULT`` + + * | RGB 4:4:4 10bits | ``MEDIA_BUS_FMT_RGB101010_1X30`` | ``V4L2_YCBCR_ENC_DEFAULT`` | * +----------------------+----------------------------------+------------------------------+ - * + RGB 4:4:4 12bits + ``MEDIA_BUS_FMT_RGB121212_1X36`` + ``V4L2_YCBCR_ENC_DEFAULT`` + + * | RGB 4:4:4 12bits | ``MEDIA_BUS_FMT_RGB121212_1X36`` | ``V4L2_YCBCR_ENC_DEFAULT`` | * +----------------------+----------------------------------+------------------------------+ - * + RGB 4:4:4 16bits + ``MEDIA_BUS_FMT_RGB161616_1X48`` + ``V4L2_YCBCR_ENC_DEFAULT`` + + * | RGB 4:4:4 16bits | ``MEDIA_BUS_FMT_RGB161616_1X48`` | ``V4L2_YCBCR_ENC_DEFAULT`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:4:4 8bit + ``MEDIA_BUS_FMT_YUV8_1X24`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + - * + + + or ``V4L2_YCBCR_ENC_XV601`` + - * + + + or ``V4L2_YCBCR_ENC_XV709`` + + * | YCbCr 4:4:4 8bit | ``MEDIA_BUS_FMT_YUV8_1X24`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | + * | | | or ``V4L2_YCBCR_ENC_XV601`` | + * | | | or ``V4L2_YCBCR_ENC_XV709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:4:4 10bits + ``MEDIA_BUS_FMT_YUV10_1X30`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + - * + + + or ``V4L2_YCBCR_ENC_XV601`` + - * + + + or ``V4L2_YCBCR_ENC_XV709`` + + * | YCbCr 4:4:4 10bits | ``MEDIA_BUS_FMT_YUV10_1X30`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | + * | | | or ``V4L2_YCBCR_ENC_XV601`` | + * | | | or ``V4L2_YCBCR_ENC_XV709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:4:4 12bits + ``MEDIA_BUS_FMT_YUV12_1X36`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + - * + + + or ``V4L2_YCBCR_ENC_XV601`` + - * + + + or ``V4L2_YCBCR_ENC_XV709`` + + * | YCbCr 4:4:4 12bits | ``MEDIA_BUS_FMT_YUV12_1X36`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | + * | | | or ``V4L2_YCBCR_ENC_XV601`` | + * | | | or ``V4L2_YCBCR_ENC_XV709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:4:4 16bits + ``MEDIA_BUS_FMT_YUV16_1X48`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + - * + + + or ``V4L2_YCBCR_ENC_XV601`` + - * + + + or ``V4L2_YCBCR_ENC_XV709`` + + * | YCbCr 4:4:4 16bits | ``MEDIA_BUS_FMT_YUV16_1X48`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | + * | | | or ``V4L2_YCBCR_ENC_XV601`` | + * | | | or ``V4L2_YCBCR_ENC_XV709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:2:2 8bit + ``MEDIA_BUS_FMT_UYVY8_1X16`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + + * | YCbCr 4:2:2 8bit | ``MEDIA_BUS_FMT_UYVY8_1X16`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:2:2 10bits + ``MEDIA_BUS_FMT_UYVY10_1X20`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + + * | YCbCr 4:2:2 10bits | ``MEDIA_BUS_FMT_UYVY10_1X20`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:2:2 12bits + ``MEDIA_BUS_FMT_UYVY12_1X24`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + + * | YCbCr 4:2:2 12bits | ``MEDIA_BUS_FMT_UYVY12_1X24`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:2:0 8bit + ``MEDIA_BUS_FMT_UYYVYY8_0_5X24`` + ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + + * | YCbCr 4:2:0 8bit | ``MEDIA_BUS_FMT_UYYVYY8_0_5X24`` | ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:2:0 10bits + ``MEDIA_BUS_FMT_UYYVYY10_0_5X30``+ ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + + * | YCbCr 4:2:0 10bits | ``MEDIA_BUS_FMT_UYYVYY10_0_5X30``| ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:2:0 12bits + ``MEDIA_BUS_FMT_UYYVYY12_0_5X36``+ ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + + * | YCbCr 4:2:0 12bits | ``MEDIA_BUS_FMT_UYYVYY12_0_5X36``| ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | * +----------------------+----------------------------------+------------------------------+ - * + YCbCr 4:2:0 16bits + ``MEDIA_BUS_FMT_UYYVYY16_0_5X48``+ ``V4L2_YCBCR_ENC_601`` + - * + + + or ``V4L2_YCBCR_ENC_709`` + + * | YCbCr 4:2:0 16bits | ``MEDIA_BUS_FMT_UYYVYY16_0_5X48``| ``V4L2_YCBCR_ENC_601`` | + * | | | or ``V4L2_YCBCR_ENC_709`` | * +----------------------+----------------------------------+------------------------------+ */ @@ -125,7 +125,7 @@ struct dw_hdmi_phy_ops { struct dw_hdmi_plat_data { struct regmap *regm; enum drm_mode_status (*mode_valid)(struct drm_connector *connector, - struct drm_display_mode *mode); + const struct drm_display_mode *mode); unsigned long input_bus_format; unsigned long input_bus_encoding; diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h new file mode 100644 index 000000000000..9b30fec302c8 --- /dev/null +++ b/include/drm/bridge/dw_mipi_dsi.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) STMicroelectronics SA 2017 + * + * Authors: Philippe Cornu <philippe.cornu@st.com> + * Yannick Fertre <yannick.fertre@st.com> + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef __DW_MIPI_DSI__ +#define __DW_MIPI_DSI__ + +struct dw_mipi_dsi_phy_ops { + int (*init)(void *priv_data); + int (*get_lane_mbps)(void *priv_data, struct drm_display_mode *mode, + unsigned long mode_flags, u32 lanes, u32 format, + unsigned int *lane_mbps); +}; + +struct dw_mipi_dsi_plat_data { + void __iomem *base; + unsigned int max_data_lanes; + + enum drm_mode_status (*mode_valid)(void *priv_data, + const struct drm_display_mode *mode); + + const struct dw_mipi_dsi_phy_ops *phy_ops; + + void *priv_data; +}; + +int dw_mipi_dsi_probe(struct platform_device *pdev, + const struct dw_mipi_dsi_plat_data *plat_data); +void dw_mipi_dsi_remove(struct platform_device *pdev); +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder, + const struct dw_mipi_dsi_plat_data *plat_data); +void dw_mipi_dsi_unbind(struct device *dev); + +#endif /* __DW_MIPI_DSI__ */ diff --git a/include/drm/drmP.h b/include/drm/drmP.h index e1daa4f343cd..7277783a4ff0 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -70,7 +70,6 @@ #include <drm/drm_fourcc.h> #include <drm/drm_global.h> #include <drm/drm_hashtab.h> -#include <drm/drm_mem_util.h> #include <drm/drm_mm.h> #include <drm/drm_os_linux.h> #include <drm/drm_sarea.h> @@ -81,18 +80,12 @@ #include <drm/drm_debugfs.h> #include <drm/drm_ioctl.h> #include <drm/drm_sysfs.h> +#include <drm/drm_vblank.h> +#include <drm/drm_irq.h> +#include <drm/drm_device.h> struct module; -struct drm_device; -struct drm_agp_head; -struct drm_local_map; -struct drm_device_dma; -struct drm_gem_object; -struct drm_master; -struct drm_vblank_crtc; -struct drm_vma_offset_manager; - struct device_node; struct videomode; struct reservation_object; @@ -293,23 +286,6 @@ struct pci_controller; /* Format strings and argument splitters to simplify printing * various "complex" objects */ -#define DRM_MODE_FMT "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x" -#define DRM_MODE_ARG(m) \ - (m)->base.id, (m)->name, (m)->vrefresh, (m)->clock, \ - (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \ - (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \ - (m)->type, (m)->flags - -#define DRM_RECT_FMT "%dx%d%+d%+d" -#define DRM_RECT_ARG(r) drm_rect_width(r), drm_rect_height(r), (r)->x1, (r)->y1 - -/* for rect's in fixed-point format: */ -#define DRM_RECT_FP_FMT "%d.%06ux%d.%06u%+d.%06u%+d.%06u" -#define DRM_RECT_FP_ARG(r) \ - drm_rect_width(r) >> 16, ((drm_rect_width(r) & 0xffff) * 15625) >> 10, \ - drm_rect_height(r) >> 16, ((drm_rect_height(r) & 0xffff) * 15625) >> 10, \ - (r)->x1 >> 16, (((r)->x1 & 0xffff) * 15625) >> 10, \ - (r)->y1 >> 16, (((r)->y1 & 0xffff) * 15625) >> 10 /*@}*/ @@ -320,149 +296,6 @@ struct pci_controller; #define DRM_IF_VERSION(maj, min) (maj << 16 | min) -/* Flags and return codes for get_vblank_timestamp() driver function. */ -#define DRM_CALLED_FROM_VBLIRQ 1 -#define DRM_VBLANKTIME_SCANOUTPOS_METHOD (1 << 0) - -/* get_scanout_position() return flags */ -#define DRM_SCANOUTPOS_VALID (1 << 0) -#define DRM_SCANOUTPOS_IN_VBLANK (1 << 1) -#define DRM_SCANOUTPOS_ACCURATE (1 << 2) - -/** - * DRM device structure. This structure represent a complete card that - * may contain multiple heads. - */ -struct drm_device { - struct list_head legacy_dev_list;/**< list of devices per driver for stealth attach cleanup */ - int if_version; /**< Highest interface version set */ - - /** \name Lifetime Management */ - /*@{ */ - struct kref ref; /**< Object ref-count */ - struct device *dev; /**< Device structure of bus-device */ - struct drm_driver *driver; /**< DRM driver managing the device */ - void *dev_private; /**< DRM driver private data */ - struct drm_minor *control; /**< Control node */ - struct drm_minor *primary; /**< Primary node */ - struct drm_minor *render; /**< Render node */ - bool registered; - - /* currently active master for this device. Protected by master_mutex */ - struct drm_master *master; - - atomic_t unplugged; /**< Flag whether dev is dead */ - struct inode *anon_inode; /**< inode for private address-space */ - char *unique; /**< unique name of the device */ - /*@} */ - - /** \name Locks */ - /*@{ */ - struct mutex struct_mutex; /**< For others */ - struct mutex master_mutex; /**< For drm_minor::master and drm_file::is_master */ - /*@} */ - - /** \name Usage Counters */ - /*@{ */ - int open_count; /**< Outstanding files open, protected by drm_global_mutex. */ - spinlock_t buf_lock; /**< For drm_device::buf_use and a few other things. */ - int buf_use; /**< Buffers in use -- cannot alloc */ - atomic_t buf_alloc; /**< Buffer allocation in progress */ - /*@} */ - - struct mutex filelist_mutex; - struct list_head filelist; - - /** \name Memory management */ - /*@{ */ - struct list_head maplist; /**< Linked list of regions */ - struct drm_open_hash map_hash; /**< User token hash table for maps */ - - /** \name Context handle management */ - /*@{ */ - struct list_head ctxlist; /**< Linked list of context handles */ - struct mutex ctxlist_mutex; /**< For ctxlist */ - - struct idr ctx_idr; - - struct list_head vmalist; /**< List of vmas (for debugging) */ - - /*@} */ - - /** \name DMA support */ - /*@{ */ - struct drm_device_dma *dma; /**< Optional pointer for DMA support */ - /*@} */ - - /** \name Context support */ - /*@{ */ - - __volatile__ long context_flag; /**< Context swapping flag */ - int last_context; /**< Last current context */ - /*@} */ - - /** \name VBLANK IRQ support */ - /*@{ */ - bool irq_enabled; - int irq; - - /* - * If true, vblank interrupt will be disabled immediately when the - * refcount drops to zero, as opposed to via the vblank disable - * timer. - * This can be set to true it the hardware has a working vblank - * counter and the driver uses drm_vblank_on() and drm_vblank_off() - * appropriately. - */ - bool vblank_disable_immediate; - - /* array of size num_crtcs */ - struct drm_vblank_crtc *vblank; - - spinlock_t vblank_time_lock; /**< Protects vblank count and time updates during vblank enable/disable */ - spinlock_t vbl_lock; - - u32 max_vblank_count; /**< size of vblank counter register */ - - /** - * List of events - */ - struct list_head vblank_event_list; - spinlock_t event_lock; - - /*@} */ - - struct drm_agp_head *agp; /**< AGP data */ - - struct pci_dev *pdev; /**< PCI device structure */ -#ifdef __alpha__ - struct pci_controller *hose; -#endif - - struct virtio_device *virtdev; - - struct drm_sg_mem *sg; /**< Scatter gather memory */ - unsigned int num_crtcs; /**< Number of CRTCs on this device */ - - struct { - int context; - struct drm_hw_lock *lock; - } sigdata; - - struct drm_local_map *agp_buffer_map; - unsigned int agp_buffer_token; - - struct drm_mode_config mode_config; /**< Current mode config */ - - /** \name GEM information */ - /*@{ */ - struct mutex object_name_lock; - struct idr object_name_idr; - struct drm_vma_offset_manager *vma_offset_manager; - /*@} */ - int switch_power_state; -}; - /** * drm_drv_uses_atomic_modeset - check if the driver implements * atomic_commit() @@ -476,8 +309,6 @@ static inline bool drm_drv_uses_atomic_modeset(struct drm_device *dev) return dev->mode_config.funcs->atomic_commit != NULL; } -#include <drm/drm_irq.h> - #define DRM_SWITCH_POWER_ON 0 #define DRM_SWITCH_POWER_OFF 1 #define DRM_SWITCH_POWER_CHANGING 2 @@ -489,19 +320,6 @@ static __inline__ int drm_core_check_feature(struct drm_device *dev, return ((dev->driver->driver_features & feature) ? 1 : 0); } -static inline void drm_device_set_unplugged(struct drm_device *dev) -{ - smp_wmb(); - atomic_set(&dev->unplugged, 1); -} - -static inline int drm_device_is_unplugged(struct drm_device *dev) -{ - int ret = atomic_read(&dev->unplugged); - smp_rmb(); - return ret; -} - /******************************************************************/ /** \name Internal function definitions */ /*@{*/ diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index 788daf756f48..8a5808eb5628 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -154,16 +154,70 @@ struct __drm_connnectors_state { struct drm_connector_state *state, *old_state, *new_state; }; +struct drm_private_obj; +struct drm_private_state; + +/** + * struct drm_private_state_funcs - atomic state functions for private objects + * + * These hooks are used by atomic helpers to create, swap and destroy states of + * private objects. The structure itself is used as a vtable to identify the + * associated private object type. Each private object type that needs to be + * added to the atomic states is expected to have an implementation of these + * hooks and pass a pointer to it's drm_private_state_funcs struct to + * drm_atomic_get_private_obj_state(). + */ +struct drm_private_state_funcs { + /** + * @atomic_duplicate_state: + * + * Duplicate the current state of the private object and return it. It + * is an error to call this before obj->state has been initialized. + * + * RETURNS: + * + * Duplicated atomic state or NULL when obj->state is not + * initialized or allocation failed. + */ + struct drm_private_state *(*atomic_duplicate_state)(struct drm_private_obj *obj); + + /** + * @atomic_destroy_state: + * + * Frees the private object state created with @atomic_duplicate_state. + */ + void (*atomic_destroy_state)(struct drm_private_obj *obj, + struct drm_private_state *state); +}; + +struct drm_private_obj { + struct drm_private_state *state; + + const struct drm_private_state_funcs *funcs; +}; + +struct drm_private_state { + struct drm_atomic_state *state; +}; + +struct __drm_private_objs_state { + struct drm_private_obj *ptr; + struct drm_private_state *state, *old_state, *new_state; +}; + /** * struct drm_atomic_state - the global state object for atomic updates * @ref: count of all references to this state (will not be freed until zero) * @dev: parent DRM device * @allow_modeset: allow full modeset * @legacy_cursor_update: hint to enforce legacy cursor IOCTL semantics + * @async_update: hint for asynchronous plane update * @planes: pointer to array of structures with per-plane data * @crtcs: pointer to array of CRTC pointers * @num_connector: size of the @connectors and @connector_states arrays * @connectors: pointer to array of structures with per-connector data + * @num_private_objs: size of the @private_objs array + * @private_objs: pointer to array of private object pointers * @acquire_ctx: acquire context for this atomic modeset state update */ struct drm_atomic_state { @@ -172,10 +226,13 @@ struct drm_atomic_state { struct drm_device *dev; bool allow_modeset : 1; bool legacy_cursor_update : 1; + bool async_update : 1; struct __drm_planes_state *planes; struct __drm_crtcs_state *crtcs; int num_connector; struct __drm_connnectors_state *connectors; + int num_private_objs; + struct __drm_private_objs_state *private_objs; struct drm_modeset_acquire_ctx *acquire_ctx; @@ -258,15 +315,18 @@ int drm_atomic_crtc_set_property(struct drm_crtc *crtc, struct drm_plane_state * __must_check drm_atomic_get_plane_state(struct drm_atomic_state *state, struct drm_plane *plane); -int drm_atomic_plane_set_property(struct drm_plane *plane, - struct drm_plane_state *state, struct drm_property *property, - uint64_t val); struct drm_connector_state * __must_check drm_atomic_get_connector_state(struct drm_atomic_state *state, struct drm_connector *connector); -int drm_atomic_connector_set_property(struct drm_connector *connector, - struct drm_connector_state *state, struct drm_property *property, - uint64_t val); + +void drm_atomic_private_obj_init(struct drm_private_obj *obj, + struct drm_private_state *state, + const struct drm_private_state_funcs *funcs); +void drm_atomic_private_obj_fini(struct drm_private_obj *obj); + +struct drm_private_state * __must_check +drm_atomic_get_private_obj_state(struct drm_atomic_state *state, + struct drm_private_obj *obj); /** * drm_atomic_get_existing_crtc_state - get crtc state, if it exists @@ -464,7 +524,7 @@ __drm_atomic_get_current_plane_state(struct drm_atomic_state *state, int __must_check drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state, - struct drm_display_mode *mode); + const struct drm_display_mode *mode); int __must_check drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state, struct drm_property_blob *blob); @@ -485,8 +545,6 @@ int __must_check drm_atomic_add_affected_planes(struct drm_atomic_state *state, struct drm_crtc *crtc); -void drm_atomic_legacy_backoff(struct drm_atomic_state *state); - void drm_atomic_clean_old_fb(struct drm_device *dev, unsigned plane_mask, int ret); @@ -753,12 +811,71 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p); for_each_if (plane) /** + * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update + * @__state: &struct drm_atomic_state pointer + * @obj: &struct drm_private_obj iteration cursor + * @old_obj_state: &struct drm_private_state iteration cursor for the old state + * @new_obj_state: &struct drm_private_state iteration cursor for the new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all private objects in an atomic update, tracking both + * old and new state. This is useful in places where the state delta needs + * to be considered, for example in atomic check functions. + */ +#define for_each_oldnew_private_obj_in_state(__state, obj, old_obj_state, new_obj_state, __i) \ + for ((__i) = 0; \ + (__i) < (__state)->num_private_objs && \ + ((obj) = (__state)->private_objs[__i].ptr, \ + (old_obj_state) = (__state)->private_objs[__i].old_state, \ + (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \ + (__i)++) \ + for_each_if (obj) + +/** + * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update + * @__state: &struct drm_atomic_state pointer + * @obj: &struct drm_private_obj iteration cursor + * @old_obj_state: &struct drm_private_state iteration cursor for the old state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all private objects in an atomic update, tracking only + * the old state. This is useful in disable functions, where we need the old + * state the hardware is still in. + */ +#define for_each_old_private_obj_in_state(__state, obj, old_obj_state, __i) \ + for ((__i) = 0; \ + (__i) < (__state)->num_private_objs && \ + ((obj) = (__state)->private_objs[__i].ptr, \ + (old_obj_state) = (__state)->private_objs[__i].old_state, 1); \ + (__i)++) \ + for_each_if (obj) + +/** + * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update + * @__state: &struct drm_atomic_state pointer + * @obj: &struct drm_private_obj iteration cursor + * @new_obj_state: &struct drm_private_state iteration cursor for the new state + * @__i: int iteration cursor, for macro-internal use + * + * This iterates over all private objects in an atomic update, tracking only + * the new state. This is useful in enable functions, where we need the new state the + * hardware should be in when the atomic commit operation has completed. + */ +#define for_each_new_private_obj_in_state(__state, obj, new_obj_state, __i) \ + for ((__i) = 0; \ + (__i) < (__state)->num_private_objs && \ + ((obj) = (__state)->private_objs[__i].ptr, \ + (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \ + (__i)++) \ + for_each_if (obj) + +/** * drm_atomic_crtc_needs_modeset - compute combined modeset need * @state: &drm_crtc_state for the CRTC * * To give drivers flexibility &struct drm_crtc_state has 3 booleans to track * whether the state CRTC changed enough to need a full modeset cycle: - * planes_changed, mode_changed and active_changed. This helper simply + * mode_changed, active_changed and connectors_changed. This helper simply * combines these three to compute the overall need for a modeset for @state. * * The atomic helper code sets these booleans, but drivers can and should diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index f0a8678ae98e..d2b56cc657e9 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -33,6 +33,8 @@ #include <drm/drm_modeset_helper.h> struct drm_atomic_state; +struct drm_private_obj; +struct drm_private_state; int drm_atomic_helper_check_modeset(struct drm_device *dev, struct drm_atomic_state *state); @@ -41,9 +43,14 @@ int drm_atomic_helper_check_planes(struct drm_device *dev, int drm_atomic_helper_check(struct drm_device *dev, struct drm_atomic_state *state); void drm_atomic_helper_commit_tail(struct drm_atomic_state *state); +void drm_atomic_helper_commit_tail_rpm(struct drm_atomic_state *state); int drm_atomic_helper_commit(struct drm_device *dev, struct drm_atomic_state *state, bool nonblock); +int drm_atomic_helper_async_check(struct drm_device *dev, + struct drm_atomic_state *state); +void drm_atomic_helper_async_commit(struct drm_device *dev, + struct drm_atomic_state *state); int drm_atomic_helper_wait_for_fences(struct drm_device *dev, struct drm_atomic_state *state, @@ -52,6 +59,9 @@ int drm_atomic_helper_wait_for_fences(struct drm_device *dev, void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev, struct drm_atomic_state *old_state); +void drm_atomic_helper_wait_for_flip_done(struct drm_device *dev, + struct drm_atomic_state *old_state); + void drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev, struct drm_atomic_state *old_state); @@ -77,8 +87,8 @@ void drm_atomic_helper_disable_planes_on_crtc(struct drm_crtc_state *old_crtc_state, bool atomic); -void drm_atomic_helper_swap_state(struct drm_atomic_state *state, - bool stall); +int __must_check drm_atomic_helper_swap_state(struct drm_atomic_state *state, + bool stall); /* nonblocking commit helpers */ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state, @@ -114,15 +124,6 @@ int drm_atomic_helper_commit_duplicated_state(struct drm_atomic_state *state, int drm_atomic_helper_resume(struct drm_device *dev, struct drm_atomic_state *state); -int drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc, - struct drm_property *property, - uint64_t val); -int drm_atomic_helper_plane_set_property(struct drm_plane *plane, - struct drm_property *property, - uint64_t val); -int drm_atomic_helper_connector_set_property(struct drm_connector *connector, - struct drm_property *property, - uint64_t val); int drm_atomic_helper_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, @@ -135,8 +136,6 @@ int drm_atomic_helper_page_flip_target( uint32_t flags, uint32_t target, struct drm_modeset_acquire_ctx *ctx); -int drm_atomic_helper_connector_dpms(struct drm_connector *connector, - int mode); struct drm_encoder * drm_atomic_helper_best_encoder(struct drm_connector *connector); @@ -178,6 +177,8 @@ int drm_atomic_helper_legacy_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, uint32_t size, struct drm_modeset_acquire_ctx *ctx); +void __drm_atomic_helper_private_obj_duplicate_state(struct drm_private_obj *obj, + struct drm_private_state *state); /** * drm_atomic_crtc_for_each_plane - iterate over planes currently attached to CRTC diff --git a/include/drm/drm_blend.h b/include/drm/drm_blend.h index 13221cf9b3eb..17606026590b 100644 --- a/include/drm/drm_blend.h +++ b/include/drm/drm_blend.h @@ -25,31 +25,15 @@ #include <linux/list.h> #include <linux/ctype.h> +#include <drm/drm_mode.h> struct drm_device; struct drm_atomic_state; - -/* - * Rotation property bits. DRM_ROTATE_<degrees> rotates the image by the - * specified amount in degrees in counter clockwise direction. DRM_REFLECT_X and - * DRM_REFLECT_Y reflects the image along the specified axis prior to rotation - * - * WARNING: These defines are UABI since they're exposed in the rotation - * property. - */ -#define DRM_ROTATE_0 BIT(0) -#define DRM_ROTATE_90 BIT(1) -#define DRM_ROTATE_180 BIT(2) -#define DRM_ROTATE_270 BIT(3) -#define DRM_ROTATE_MASK (DRM_ROTATE_0 | DRM_ROTATE_90 | \ - DRM_ROTATE_180 | DRM_ROTATE_270) -#define DRM_REFLECT_X BIT(4) -#define DRM_REFLECT_Y BIT(5) -#define DRM_REFLECT_MASK (DRM_REFLECT_X | DRM_REFLECT_Y) +struct drm_plane; static inline bool drm_rotation_90_or_270(unsigned int rotation) { - return rotation & (DRM_ROTATE_90 | DRM_ROTATE_270); + return rotation & (DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270); } int drm_plane_create_rotation_property(struct drm_plane *plane, diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index fdd82fcbf168..6522d4cbc9d9 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -29,6 +29,7 @@ #include <drm/drm_modes.h> struct drm_bridge; +struct drm_panel; /** * struct drm_bridge_funcs - drm_bridge control functions @@ -59,6 +60,40 @@ struct drm_bridge_funcs { void (*detach)(struct drm_bridge *bridge); /** + * @mode_valid: + * + * This callback is used to check if a specific mode is valid in this + * bridge. This should be implemented if the bridge has some sort of + * restriction in the modes it can display. For example, a given bridge + * may be responsible to set a clock value. If the clock can not + * produce all the values for the available modes then this callback + * can be used to restrict the number of modes to only the ones that + * can be displayed. + * + * This hook is used by the probe helpers to filter the mode list in + * drm_helper_probe_single_connector_modes(), and it is used by the + * atomic helpers to validate modes supplied by userspace in + * drm_atomic_helper_check_modeset(). + * + * This function is optional. + * + * NOTE: + * + * Since this function is both called from the check phase of an atomic + * commit, and the mode validation in the probe paths it is not allowed + * to look at anything else but the passed-in mode, and validate it + * against configuration-invariant hardward constraints. Any further + * limits which depend upon the configuration can only be checked in + * @mode_fixup. + * + * RETURNS: + * + * drm_mode_status Enum + */ + enum drm_mode_status (*mode_valid)(struct drm_bridge *crtc, + const struct drm_display_mode *mode); + + /** * @mode_fixup: * * This callback is used to validate and adjust a mode. The paramater @@ -66,7 +101,7 @@ struct drm_bridge_funcs { * the display chain, either the final &drm_connector or the next * &drm_bridge. The parameter adjusted_mode is the input mode the bridge * requires. It can be modified by this callback and does not need to - * match mode. + * match mode. See also &drm_crtc_state.adjusted_mode for more details. * * This is the only hook that allows a bridge to reject a modeset. If * this function passes all other callbacks must succeed for this @@ -82,6 +117,12 @@ struct drm_bridge_funcs { * NOT touch any persistent state (hardware or software) or data * structures except the passed in @state parameter. * + * Also beware that userspace can request its own custom modes, neither + * core nor helpers filter modes to the list of probe modes reported by + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure + * that modes are filtered consistently put any bridge constraints and + * limits checks into @mode_valid. + * * RETURNS: * * True if an acceptable configuration is possible, false if the modeset @@ -213,6 +254,8 @@ int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge, bool drm_bridge_mode_fixup(struct drm_bridge *bridge, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode); +enum drm_mode_status drm_bridge_mode_valid(struct drm_bridge *bridge, + const struct drm_display_mode *mode); void drm_bridge_disable(struct drm_bridge *bridge); void drm_bridge_post_disable(struct drm_bridge *bridge); void drm_bridge_mode_set(struct drm_bridge *bridge, @@ -221,4 +264,13 @@ void drm_bridge_mode_set(struct drm_bridge *bridge, void drm_bridge_pre_enable(struct drm_bridge *bridge); void drm_bridge_enable(struct drm_bridge *bridge); +#ifdef CONFIG_DRM_PANEL_BRIDGE +struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel, + u32 connector_type); +void drm_panel_bridge_remove(struct drm_bridge *bridge); +struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev, + struct drm_panel *panel, + u32 connector_type); +#endif + #endif diff --git a/include/drm/drm_color_mgmt.h b/include/drm/drm_color_mgmt.h index bce4a532836d..03a59cbce621 100644 --- a/include/drm/drm_color_mgmt.h +++ b/include/drm/drm_color_mgmt.h @@ -25,6 +25,8 @@ #include <linux/ctype.h> +struct drm_crtc; + uint32_t drm_color_lut_extract(uint32_t user_input, uint32_t bit_precision); void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc, diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 4eeda120e46d..ea8da401c93c 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -25,12 +25,11 @@ #include <linux/list.h> #include <linux/ctype.h> +#include <linux/hdmi.h> #include <drm/drm_mode_object.h> #include <uapi/drm/drm_mode.h> -struct drm_device; - struct drm_connector_helper_funcs; struct drm_modeset_acquire_ctx; struct drm_device; @@ -136,6 +135,28 @@ struct drm_scdc { struct drm_hdmi_info { /** @scdc: sink's scdc support and capabilities */ struct drm_scdc scdc; + + /** + * @y420_vdb_modes: bitmap of modes which can support ycbcr420 + * output only (not normal RGB/YCBCR444/422 outputs). There are total + * 107 VICs defined by CEA-861-F spec, so the size is 128 bits to map + * upto 128 VICs; + */ + unsigned long y420_vdb_modes[BITS_TO_LONGS(128)]; + + /** + * @y420_cmdb_modes: bitmap of modes which can support ycbcr420 + * output also, along with normal HDMI outputs. There are total 107 + * VICs defined by CEA-861-F spec, so the size is 128 bits to map upto + * 128 VICs; + */ + unsigned long y420_cmdb_modes[BITS_TO_LONGS(128)]; + + /** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */ + u64 y420_cmdb_map; + + /** @y420_dc_modes: bitmap of deep color support index */ + u8 y420_dc_modes; }; /** @@ -199,6 +220,7 @@ struct drm_display_info { #define DRM_COLOR_FORMAT_RGB444 (1<<0) #define DRM_COLOR_FORMAT_YCRCB444 (1<<1) #define DRM_COLOR_FORMAT_YCRCB422 (1<<2) +#define DRM_COLOR_FORMAT_YCRCB420 (1<<3) /** * @color_formats: HDMI Color formats, selects between RGB and YCrCb @@ -326,6 +348,21 @@ struct drm_connector_state { struct drm_atomic_state *state; struct drm_tv_connector_state tv; + + /** + * @picture_aspect_ratio: Connector property to control the + * HDMI infoframe aspect ratio setting. + * + * The %DRM_MODE_PICTURE_ASPECT_\* values much match the + * values for &enum hdmi_picture_aspect + */ + enum hdmi_picture_aspect picture_aspect_ratio; + + /** + * @scaling_mode: Connector property to control the + * upscaling, mostly used for built-in panels. + */ + unsigned int scaling_mode; }; /** @@ -345,8 +382,8 @@ struct drm_connector_funcs { * implement the 4 level DPMS support on the connector any more, but * instead only have an on/off "ACTIVE" property on the CRTC object. * - * Drivers implementing atomic modeset should use - * drm_atomic_helper_connector_dpms() to implement this hook. + * This hook is not used by atomic drivers, remapping of the legacy DPMS + * property is entirely handled in the DRM core. * * RETURNS: * @@ -443,11 +480,9 @@ struct drm_connector_funcs { * This is the legacy entry point to update a property attached to the * connector. * - * Drivers implementing atomic modeset should use - * drm_atomic_helper_connector_set_property() to implement this hook. - * * This callback is optional if the driver does not support any legacy - * driver-private properties. + * driver-private properties. For atomic drivers it is not used because + * property handling is done entirely in the DRM core. * * RETURNS: * @@ -675,6 +710,7 @@ struct drm_cmdline_mode { * @tile_v_loc: vertical location of this tile * @tile_h_size: horizontal size of this tile. * @tile_v_size: vertical size of this tile. + * @scaling_mode_property: Optional atomic property to control the upscaling. * * Each connector may be connected to one or more CRTCs, or may be clonable by * another connector if they can share a CRTC. Each connector also has a specific @@ -711,6 +747,15 @@ struct drm_connector { bool interlace_allowed; bool doublescan_allowed; bool stereo_allowed; + + /** + * @ycbcr_420_allowed : This bool indicates if this connector is + * capable of handling YCBCR 420 output. While parsing the EDID + * blocks, its very helpful to know, if the source is capable of + * handling YCBCR 420 outputs. + */ + bool ycbcr_420_allowed; + /** * @registered: Is this connector exposed (registered) with userspace? * Protected by @mutex. @@ -754,6 +799,8 @@ struct drm_connector { struct drm_property_blob *edid_blob_ptr; struct drm_object_properties properties; + struct drm_property *scaling_mode_property; + /** * @path_blob_ptr: * @@ -953,6 +1000,8 @@ int drm_mode_create_tv_properties(struct drm_device *dev, unsigned int num_modes, const char * const modes[]); int drm_mode_create_scaling_mode_property(struct drm_device *dev); +int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, + u32 scaling_mode_mask); int drm_mode_create_aspect_ratio_property(struct drm_device *dev); int drm_mode_create_suggested_offset_properties(struct drm_device *dev); @@ -989,21 +1038,6 @@ void drm_mode_put_tile_group(struct drm_device *dev, struct drm_tile_group *tg); /** - * drm_for_each_connector - iterate over all connectors - * @connector: the loop cursor - * @dev: the DRM device - * - * Iterate over all connectors of @dev. - * - * WARNING: - * - * This iterator is not safe against hotadd/removal of connectors and is - * deprecated. Use drm_for_each_connector_iter() instead. - */ -#define drm_for_each_connector(connector, dev) \ - list_for_each_entry(connector, &(dev)->mode_config.connector_list, head) - -/** * struct drm_connector_list_iter - connector_list iterator * * This iterator tracks state needed to be able to walk the connector_list @@ -1031,7 +1065,7 @@ void drm_connector_list_iter_end(struct drm_connector_list_iter *iter); * * Note that @connector is only valid within the list body, if you want to use * @connector after calling drm_connector_list_iter_end() then you need to grab - * your own reference first using drm_connector_begin(). + * your own reference first using drm_connector_get(). */ #define drm_for_each_connector_iter(connector, iter) \ while ((connector = drm_connector_list_iter_next(iter))) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index a8176a836e25..1a642020e306 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -90,14 +90,7 @@ struct drm_plane_helper_funcs; * @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes * @connector_mask: bitmask of (1 << drm_connector_index(connector)) of attached connectors * @encoder_mask: bitmask of (1 << drm_encoder_index(encoder)) of attached encoders - * @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings - * @mode: current mode timings * @mode_blob: &drm_property_blob for @mode - * @degamma_lut: Lookup table for converting framebuffer pixel data - * before apply the conversion matrix - * @ctm: Transformation matrix - * @gamma_lut: Lookup table for converting pixel data after the - * conversion matrix * @state: backpointer to global drm_atomic_state * * Note that the distinction between @enable and @active is rather subtile: @@ -136,17 +129,62 @@ struct drm_crtc_state { u32 connector_mask; u32 encoder_mask; - /* adjusted_mode: for use by helpers and drivers */ + /** + * @adjusted_mode: + * + * Internal display timings which can be used by the driver to handle + * differences between the mode requested by userspace in @mode and what + * is actually programmed into the hardware. It is purely driver + * implementation defined what exactly this adjusted mode means. Usually + * it is used to store the hardware display timings used between the + * CRTC and encoder blocks. + */ struct drm_display_mode adjusted_mode; + /** + * @mode: + * + * Display timings requested by userspace. The driver should try to + * match the refresh rate as close as possible (but note that it's + * undefined what exactly is close enough, e.g. some of the HDMI modes + * only differ in less than 1% of the refresh rate). The active width + * and height as observed by userspace for positioning planes must match + * exactly. + * + * For external connectors where the sink isn't fixed (like with a + * built-in panel), this mode here should match the physical mode on the + * wire to the last details (i.e. including sync polarities and + * everything). + */ struct drm_display_mode mode; /* blob property to expose current mode to atomic userspace */ struct drm_property_blob *mode_blob; - /* blob property to expose color management to userspace */ + /** + * @degamma_lut: + * + * Lookup table for converting framebuffer pixel data before apply the + * color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The + * blob (if not NULL) is an array of &struct drm_color_lut. + */ struct drm_property_blob *degamma_lut; + + /** + * @ctm: + * + * Color transformation matrix. See drm_crtc_enable_color_mgmt(). The + * blob (if not NULL) is a &struct drm_color_ctm. + */ struct drm_property_blob *ctm; + + /** + * @gamma_lut: + * + * Lookup table for converting pixel data after the color conversion + * matrix @ctm. See drm_crtc_enable_color_mgmt(). The blob (if not + * NULL) is an array of &struct drm_color_lut. + */ struct drm_property_blob *gamma_lut; /** @@ -176,7 +214,9 @@ struct drm_crtc_state { * atomic commit. In that case the event can be send out any time * after the hardware has stopped scanning out the current * framebuffers. It should contain the timestamp and counter for the - * last vblank before the display pipeline was shut off. + * last vblank before the display pipeline was shut off. The simplest + * way to achieve that is calling drm_crtc_send_vblank_event() + * somewhen after drm_crtc_vblank_off() has been called. * * - For a CRTC which is enabled at the end of the commit (even when it * undergoes an full modeset) the vblank timestamp and counter must @@ -313,13 +353,11 @@ struct drm_crtc_funcs { * * This callback is optional. * - * NOTE: - * - * Drivers that support gamma tables and also fbdev emulation through - * the provided helper library need to take care to fill out the gamma - * hooks for both. Currently there's a bit an unfortunate duplication - * going on, which should eventually be unified to just one set of - * hooks. + * Atomic drivers who want to support gamma tables should implement the + * atomic color management support, enabled by calling + * drm_crtc_enable_color_mgmt(), which then supports the legacy gamma + * interface through the drm_atomic_helper_legacy_gamma_set() + * compatibility implementation. */ int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t size, @@ -435,11 +473,9 @@ struct drm_crtc_funcs { * This is the legacy entry point to update a property attached to the * CRTC. * - * Drivers implementing atomic modeset should use - * drm_atomic_helper_crtc_set_property() to implement this hook. - * * This callback is optional if the driver does not support any legacy - * driver-private properties. + * driver-private properties. For atomic drivers it is not used because + * property handling is done entirely in the DRM core. * * RETURNS: * @@ -639,6 +675,9 @@ struct drm_crtc_funcs { * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or * enabling a CRTC. * + * See also &drm_device.vblank_disable_immediate and + * &drm_device.max_vblank_count. + * * Returns: * * Raw vblank counter value. diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h new file mode 100644 index 000000000000..e21af87a2f3c --- /dev/null +++ b/include/drm/drm_device.h @@ -0,0 +1,190 @@ +#ifndef _DRM_DEVICE_H_ +#define _DRM_DEVICE_H_ + +#include <linux/list.h> +#include <linux/kref.h> +#include <linux/mutex.h> +#include <linux/idr.h> + +#include <drm/drm_hashtab.h> +#include <drm/drm_mode_config.h> + +struct drm_driver; +struct drm_minor; +struct drm_master; +struct drm_device_dma; +struct drm_vblank_crtc; +struct drm_sg_mem; +struct drm_local_map; +struct drm_vma_offset_manager; + +struct inode; + +struct pci_dev; +struct pci_controller; + +/** + * DRM device structure. This structure represent a complete card that + * may contain multiple heads. + */ +struct drm_device { + struct list_head legacy_dev_list;/**< list of devices per driver for stealth attach cleanup */ + int if_version; /**< Highest interface version set */ + + /** \name Lifetime Management */ + /*@{ */ + struct kref ref; /**< Object ref-count */ + struct device *dev; /**< Device structure of bus-device */ + struct drm_driver *driver; /**< DRM driver managing the device */ + void *dev_private; /**< DRM driver private data */ + struct drm_minor *control; /**< Control node */ + struct drm_minor *primary; /**< Primary node */ + struct drm_minor *render; /**< Render node */ + bool registered; + + /* currently active master for this device. Protected by master_mutex */ + struct drm_master *master; + + atomic_t unplugged; /**< Flag whether dev is dead */ + struct inode *anon_inode; /**< inode for private address-space */ + char *unique; /**< unique name of the device */ + /*@} */ + + /** \name Locks */ + /*@{ */ + struct mutex struct_mutex; /**< For others */ + struct mutex master_mutex; /**< For drm_minor::master and drm_file::is_master */ + /*@} */ + + /** \name Usage Counters */ + /*@{ */ + int open_count; /**< Outstanding files open, protected by drm_global_mutex. */ + spinlock_t buf_lock; /**< For drm_device::buf_use and a few other things. */ + int buf_use; /**< Buffers in use -- cannot alloc */ + atomic_t buf_alloc; /**< Buffer allocation in progress */ + /*@} */ + + struct mutex filelist_mutex; + struct list_head filelist; + + /** \name Memory management */ + /*@{ */ + struct list_head maplist; /**< Linked list of regions */ + struct drm_open_hash map_hash; /**< User token hash table for maps */ + + /** \name Context handle management */ + /*@{ */ + struct list_head ctxlist; /**< Linked list of context handles */ + struct mutex ctxlist_mutex; /**< For ctxlist */ + + struct idr ctx_idr; + + struct list_head vmalist; /**< List of vmas (for debugging) */ + + /*@} */ + + /** \name DMA support */ + /*@{ */ + struct drm_device_dma *dma; /**< Optional pointer for DMA support */ + /*@} */ + + /** \name Context support */ + /*@{ */ + + __volatile__ long context_flag; /**< Context swapping flag */ + int last_context; /**< Last current context */ + /*@} */ + + /** + * @irq_enabled: + * + * Indicates that interrupt handling is enabled, specifically vblank + * handling. Drivers which don't use drm_irq_install() need to set this + * to true manually. + */ + bool irq_enabled; + int irq; + + /** + * @vblank_disable_immediate: + * + * If true, vblank interrupt will be disabled immediately when the + * refcount drops to zero, as opposed to via the vblank disable + * timer. + * + * This can be set to true it the hardware has a working vblank counter + * with high-precision timestamping (otherwise there are races) and the + * driver uses drm_crtc_vblank_on() and drm_crtc_vblank_off() + * appropriately. See also @max_vblank_count and + * &drm_crtc_funcs.get_vblank_counter. + */ + bool vblank_disable_immediate; + + /** + * @vblank: + * + * Array of vblank tracking structures, one per &struct drm_crtc. For + * historical reasons (vblank support predates kernel modesetting) this + * is free-standing and not part of &struct drm_crtc itself. It must be + * initialized explicitly by calling drm_vblank_init(). + */ + struct drm_vblank_crtc *vblank; + + spinlock_t vblank_time_lock; /**< Protects vblank count and time updates during vblank enable/disable */ + spinlock_t vbl_lock; + + /** + * @max_vblank_count: + * + * Maximum value of the vblank registers. This value +1 will result in a + * wrap-around of the vblank register. It is used by the vblank core to + * handle wrap-arounds. + * + * If set to zero the vblank core will try to guess the elapsed vblanks + * between times when the vblank interrupt is disabled through + * high-precision timestamps. That approach is suffering from small + * races and imprecision over longer time periods, hence exposing a + * hardware vblank counter is always recommended. + * + * If non-zeor, &drm_crtc_funcs.get_vblank_counter must be set. + */ + u32 max_vblank_count; /**< size of vblank counter register */ + + /** + * List of events + */ + struct list_head vblank_event_list; + spinlock_t event_lock; + + /*@} */ + + struct drm_agp_head *agp; /**< AGP data */ + + struct pci_dev *pdev; /**< PCI device structure */ +#ifdef __alpha__ + struct pci_controller *hose; +#endif + + struct drm_sg_mem *sg; /**< Scatter gather memory */ + unsigned int num_crtcs; /**< Number of CRTCs on this device */ + + struct { + int context; + struct drm_hw_lock *lock; + } sigdata; + + struct drm_local_map *agp_buffer_map; + unsigned int agp_buffer_token; + + struct drm_mode_config mode_config; /**< Current mode config */ + + /** \name GEM information */ + /*@{ */ + struct mutex object_name_lock; + struct idr object_name_idr; + struct drm_vma_offset_manager *vma_offset_manager; + /*@} */ + int switch_power_state; +}; + +#endif diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index bb837310c07e..b17476a6909c 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -179,6 +179,111 @@ #define DP_GUID 0x030 /* 1.2 */ +#define DP_DSC_SUPPORT 0x060 /* DP 1.4 */ +# define DP_DSC_DECOMPRESSION_IS_SUPPORTED (1 << 0) + +#define DP_DSC_REV 0x061 +# define DP_DSC_MAJOR_MASK (0xf << 0) +# define DP_DSC_MINOR_MASK (0xf << 4) +# define DP_DSC_MAJOR_SHIFT 0 +# define DP_DSC_MINOR_SHIFT 4 + +#define DP_DSC_RC_BUF_BLK_SIZE 0x062 +# define DP_DSC_RC_BUF_BLK_SIZE_1 0x0 +# define DP_DSC_RC_BUF_BLK_SIZE_4 0x1 +# define DP_DSC_RC_BUF_BLK_SIZE_16 0x2 +# define DP_DSC_RC_BUF_BLK_SIZE_64 0x3 + +#define DP_DSC_RC_BUF_SIZE 0x063 + +#define DP_DSC_SLICE_CAP_1 0x064 +# define DP_DSC_1_PER_DP_DSC_SINK (1 << 0) +# define DP_DSC_2_PER_DP_DSC_SINK (1 << 1) +# define DP_DSC_4_PER_DP_DSC_SINK (1 << 3) +# define DP_DSC_6_PER_DP_DSC_SINK (1 << 4) +# define DP_DSC_8_PER_DP_DSC_SINK (1 << 5) +# define DP_DSC_10_PER_DP_DSC_SINK (1 << 6) +# define DP_DSC_12_PER_DP_DSC_SINK (1 << 7) + +#define DP_DSC_LINE_BUF_BIT_DEPTH 0x065 +# define DP_DSC_LINE_BUF_BIT_DEPTH_MASK (0xf << 0) +# define DP_DSC_LINE_BUF_BIT_DEPTH_9 0x0 +# define DP_DSC_LINE_BUF_BIT_DEPTH_10 0x1 +# define DP_DSC_LINE_BUF_BIT_DEPTH_11 0x2 +# define DP_DSC_LINE_BUF_BIT_DEPTH_12 0x3 +# define DP_DSC_LINE_BUF_BIT_DEPTH_13 0x4 +# define DP_DSC_LINE_BUF_BIT_DEPTH_14 0x5 +# define DP_DSC_LINE_BUF_BIT_DEPTH_15 0x6 +# define DP_DSC_LINE_BUF_BIT_DEPTH_16 0x7 +# define DP_DSC_LINE_BUF_BIT_DEPTH_8 0x8 + +#define DP_DSC_BLK_PREDICTION_SUPPORT 0x066 +# define DP_DSC_BLK_PREDICTION_IS_SUPPORTED (1 << 0) + +#define DP_DSC_MAX_BITS_PER_PIXEL_LOW 0x067 /* eDP 1.4 */ + +#define DP_DSC_MAX_BITS_PER_PIXEL_HI 0x068 /* eDP 1.4 */ + +#define DP_DSC_DEC_COLOR_FORMAT_CAP 0x069 +# define DP_DSC_RGB (1 << 0) +# define DP_DSC_YCbCr444 (1 << 1) +# define DP_DSC_YCbCr422_Simple (1 << 2) +# define DP_DSC_YCbCr422_Native (1 << 3) +# define DP_DSC_YCbCr420_Native (1 << 4) + +#define DP_DSC_DEC_COLOR_DEPTH_CAP 0x06A +# define DP_DSC_8_BPC (1 << 1) +# define DP_DSC_10_BPC (1 << 2) +# define DP_DSC_12_BPC (1 << 3) + +#define DP_DSC_PEAK_THROUGHPUT 0x06B +# define DP_DSC_THROUGHPUT_MODE_0_MASK (0xf << 0) +# define DP_DSC_THROUGHPUT_MODE_0_SHIFT 0 +# define DP_DSC_THROUGHPUT_MODE_0_340 (1 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_400 (2 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_450 (3 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_500 (4 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_550 (5 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_600 (6 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_650 (7 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_700 (8 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_750 (9 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_800 (10 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_850 (11 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_900 (12 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_950 (13 << 0) +# define DP_DSC_THROUGHPUT_MODE_0_1000 (14 << 0) +# define DP_DSC_THROUGHPUT_MODE_1_MASK (0xf << 4) +# define DP_DSC_THROUGHPUT_MODE_1_SHIFT 4 +# define DP_DSC_THROUGHPUT_MODE_1_340 (1 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_400 (2 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_450 (3 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_500 (4 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_550 (5 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_600 (6 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_650 (7 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_700 (8 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_750 (9 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_800 (10 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_850 (11 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_900 (12 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_950 (13 << 4) +# define DP_DSC_THROUGHPUT_MODE_1_1000 (14 << 4) + +#define DP_DSC_MAX_SLICE_WIDTH 0x06C + +#define DP_DSC_SLICE_CAP_2 0x06D +# define DP_DSC_16_PER_DP_DSC_SINK (1 << 0) +# define DP_DSC_20_PER_DP_DSC_SINK (1 << 1) +# define DP_DSC_24_PER_DP_DSC_SINK (1 << 2) + +#define DP_DSC_BITS_PER_PIXEL_INC 0x06F +# define DP_DSC_BITS_PER_PIXEL_1_16 0x0 +# define DP_DSC_BITS_PER_PIXEL_1_8 0x1 +# define DP_DSC_BITS_PER_PIXEL_1_4 0x2 +# define DP_DSC_BITS_PER_PIXEL_1_2 0x3 +# define DP_DSC_BITS_PER_PIXEL_1 0x4 + #define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */ # define DP_PSR_IS_SUPPORTED 1 # define DP_PSR2_IS_SUPPORTED 2 /* eDP 1.4 */ @@ -339,6 +444,8 @@ #define DP_AUX_FRAME_SYNC_VALUE 0x15c /* eDP 1.4 */ # define DP_AUX_FRAME_SYNC_VALID (1 << 0) +#define DP_DSC_ENABLE 0x160 /* DP 1.4 */ + #define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */ # define DP_PSR_ENABLE (1 << 0) # define DP_PSR_MAIN_LINK_ACTIVE (1 << 1) @@ -572,10 +679,12 @@ #define DP_EDP_PWMGEN_BIT_COUNT 0x724 #define DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN 0x725 #define DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX 0x726 +# define DP_EDP_PWMGEN_BIT_COUNT_MASK (0x1f << 0) #define DP_EDP_BACKLIGHT_CONTROL_STATUS 0x727 #define DP_EDP_BACKLIGHT_FREQ_SET 0x728 +# define DP_EDP_BACKLIGHT_FREQ_BASE_KHZ 27000 #define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MSB 0x72a #define DP_EDP_BACKLIGHT_FREQ_CAP_MIN_MID 0x72b @@ -603,6 +712,9 @@ #define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* 1.2 */ #define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */ +# define DP_RX_GTC_MSTR_REQ_STATUS_CHANGE (1 << 0) +# define DP_LOCK_ACQUISITION_REQUEST (1 << 1) +# define DP_CEC_IRQ (1 << 2) #define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */ @@ -636,6 +748,62 @@ # define DP_VSC_EXT_CEA_SDP_SUPPORTED (1 << 6) /* DP 1.4 */ # define DP_VSC_EXT_CEA_SDP_CHAINING_SUPPORTED (1 << 7) /* DP 1.4 */ +/* HDMI CEC tunneling over AUX DP 1.3 section 5.3.3.3.1 DPCD 1.4+ */ +#define DP_CEC_TUNNELING_CAPABILITY 0x3000 +# define DP_CEC_TUNNELING_CAPABLE (1 << 0) +# define DP_CEC_SNOOPING_CAPABLE (1 << 1) +# define DP_CEC_MULTIPLE_LA_CAPABLE (1 << 2) + +#define DP_CEC_TUNNELING_CONTROL 0x3001 +# define DP_CEC_TUNNELING_ENABLE (1 << 0) +# define DP_CEC_SNOOPING_ENABLE (1 << 1) + +#define DP_CEC_RX_MESSAGE_INFO 0x3002 +# define DP_CEC_RX_MESSAGE_LEN_MASK (0xf << 0) +# define DP_CEC_RX_MESSAGE_LEN_SHIFT 0 +# define DP_CEC_RX_MESSAGE_HPD_STATE (1 << 4) +# define DP_CEC_RX_MESSAGE_HPD_LOST (1 << 5) +# define DP_CEC_RX_MESSAGE_ACKED (1 << 6) +# define DP_CEC_RX_MESSAGE_ENDED (1 << 7) + +#define DP_CEC_TX_MESSAGE_INFO 0x3003 +# define DP_CEC_TX_MESSAGE_LEN_MASK (0xf << 0) +# define DP_CEC_TX_MESSAGE_LEN_SHIFT 0 +# define DP_CEC_TX_RETRY_COUNT_MASK (0x7 << 4) +# define DP_CEC_TX_RETRY_COUNT_SHIFT 4 +# define DP_CEC_TX_MESSAGE_SEND (1 << 7) + +#define DP_CEC_TUNNELING_IRQ_FLAGS 0x3004 +# define DP_CEC_RX_MESSAGE_INFO_VALID (1 << 0) +# define DP_CEC_RX_MESSAGE_OVERFLOW (1 << 1) +# define DP_CEC_TX_MESSAGE_SENT (1 << 4) +# define DP_CEC_TX_LINE_ERROR (1 << 5) +# define DP_CEC_TX_ADDRESS_NACK_ERROR (1 << 6) +# define DP_CEC_TX_DATA_NACK_ERROR (1 << 7) + +#define DP_CEC_LOGICAL_ADDRESS_MASK 0x300E /* 0x300F word */ +# define DP_CEC_LOGICAL_ADDRESS_0 (1 << 0) +# define DP_CEC_LOGICAL_ADDRESS_1 (1 << 1) +# define DP_CEC_LOGICAL_ADDRESS_2 (1 << 2) +# define DP_CEC_LOGICAL_ADDRESS_3 (1 << 3) +# define DP_CEC_LOGICAL_ADDRESS_4 (1 << 4) +# define DP_CEC_LOGICAL_ADDRESS_5 (1 << 5) +# define DP_CEC_LOGICAL_ADDRESS_6 (1 << 6) +# define DP_CEC_LOGICAL_ADDRESS_7 (1 << 7) +#define DP_CEC_LOGICAL_ADDRESS_MASK_2 0x300F /* 0x300E word */ +# define DP_CEC_LOGICAL_ADDRESS_8 (1 << 0) +# define DP_CEC_LOGICAL_ADDRESS_9 (1 << 1) +# define DP_CEC_LOGICAL_ADDRESS_10 (1 << 2) +# define DP_CEC_LOGICAL_ADDRESS_11 (1 << 3) +# define DP_CEC_LOGICAL_ADDRESS_12 (1 << 4) +# define DP_CEC_LOGICAL_ADDRESS_13 (1 << 5) +# define DP_CEC_LOGICAL_ADDRESS_14 (1 << 6) +# define DP_CEC_LOGICAL_ADDRESS_15 (1 << 7) + +#define DP_CEC_RX_MESSAGE_BUFFER 0x3010 +#define DP_CEC_TX_MESSAGE_BUFFER 0x3020 +#define DP_CEC_MESSAGE_BUFFER_LENGTH 0x10 + /* DP 1.2 Sideband message defines */ /* peer device type - DP 1.2a Table 2-92 */ #define DP_PEER_DEVICE_NONE 0x0 diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h index 5b024764666c..d55abb75f29a 100644 --- a/include/drm/drm_dp_mst_helper.h +++ b/include/drm/drm_dp_mst_helper.h @@ -24,6 +24,7 @@ #include <linux/types.h> #include <drm/drm_dp_helper.h> +#include <drm/drm_atomic.h> struct drm_dp_mst_branch; @@ -403,6 +404,17 @@ struct drm_dp_payload { int vcpi; }; +#define to_dp_mst_topology_state(x) container_of(x, struct drm_dp_mst_topology_state, base) + +struct drm_dp_mst_topology_state { + struct drm_private_state base; + int avail_slots; + struct drm_atomic_state *state; + struct drm_dp_mst_topology_mgr *mgr; +}; + +#define to_dp_mst_topology_mgr(x) container_of(x, struct drm_dp_mst_topology_mgr, base) + /** * struct drm_dp_mst_topology_mgr - DisplayPort MST manager * @@ -412,6 +424,11 @@ struct drm_dp_payload { */ struct drm_dp_mst_topology_mgr { /** + * @base: Base private object for atomic + */ + struct drm_private_obj base; + + /** * @dev: device pointer for adding i2c devices etc. */ struct drm_device *dev; @@ -481,6 +498,16 @@ struct drm_dp_mst_topology_mgr { int pbn_div; /** + * @state: State information for topology manager + */ + struct drm_dp_mst_topology_state *state; + + /** + * @funcs: Atomic helper callbacks + */ + const struct drm_private_state_funcs *funcs; + + /** * @qlock: protects @tx_msg_downq, the &drm_dp_mst_branch.txslost and * &drm_dp_sideband_msg_tx.state once they are queued */ @@ -596,4 +623,13 @@ void drm_dp_mst_dump_topology(struct seq_file *m, void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr); int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr); +struct drm_dp_mst_topology_state *drm_atomic_get_mst_topology_state(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr); +int drm_dp_atomic_find_vcpi_slots(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr, + struct drm_dp_mst_port *port, int pbn); +int drm_dp_atomic_release_vcpi_slots(struct drm_atomic_state *state, + struct drm_dp_mst_topology_mgr *mgr, + int slots); + #endif diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h index 53b98321df9b..71bbaaec836d 100644 --- a/include/drm/drm_drv.h +++ b/include/drm/drm_drv.h @@ -30,7 +30,8 @@ #include <linux/list.h> #include <linux/irqreturn.h> -struct drm_device; +#include <drm/drm_device.h> + struct drm_file; struct drm_gem_object; struct drm_master; @@ -53,6 +54,7 @@ struct drm_mode_create_dumb; #define DRIVER_RENDER 0x8000 #define DRIVER_ATOMIC 0x10000 #define DRIVER_KMS_LEGACY_CONTEXT 0x20000 +#define DRIVER_SYNCOBJ 0x40000 /** * struct drm_driver - DRM driver structure @@ -104,23 +106,6 @@ struct drm_driver { int (*open) (struct drm_device *, struct drm_file *); /** - * @preclose: - * - * One of the driver callbacks when a new &struct drm_file is closed. - * Useful for tearing down driver-private data structures allocated in - * @open like buffer allocators, execution contexts or similar things. - * - * Since the display/modeset side of DRM can only be owned by exactly - * one &struct drm_file (see &drm_file.is_master and &drm_device.master) - * there should never be a need to tear down any modeset related - * resources in this callback. Doing so would be a driver design bug. - * - * FIXME: It is not really clear why there's both @preclose and - * @postclose. Without a really good reason, use @postclose only. - */ - void (*preclose) (struct drm_device *, struct drm_file *file_priv); - - /** * @postclose: * * One of the driver callbacks when a new &struct drm_file is closed. @@ -131,9 +116,6 @@ struct drm_driver { * one &struct drm_file (see &drm_file.is_master and &drm_device.master) * there should never be a need to tear down any modeset related * resources in this callback. Doing so would be a driver design bug. - * - * FIXME: It is not really clear why there's both @preclose and - * @postclose. Without a really good reason, use @postclose only. */ void (*postclose) (struct drm_device *, struct drm_file *); @@ -150,7 +132,7 @@ struct drm_driver { * state changes, e.g. in conjunction with the :ref:`vga_switcheroo` * infrastructure. * - * This is called after @preclose and @postclose have been called. + * This is called after @postclose hook has been called. * * NOTE: * @@ -192,8 +174,6 @@ struct drm_driver { */ void (*release) (struct drm_device *); - int (*set_busid)(struct drm_device *dev, struct drm_master *master); - /** * @get_vblank_counter: * @@ -261,8 +241,10 @@ struct drm_driver { * DRM device. * pipe: * Id of the crtc to query. - * flags: - * Flags from the caller (DRM_CALLED_FROM_VBLIRQ or 0). + * in_vblank_irq: + * True when called from drm_crtc_handle_vblank(). Some drivers + * need to apply some workarounds for gpu-specific vblank irq quirks + * if flag is set. * vpos: * Target location for current vertical scanout position. * hpos: @@ -283,22 +265,19 @@ struct drm_driver { * * Returns: * - * Flags, or'ed together as follows: + * True on success, false if a reliable scanout position counter could + * not be read out. * - * DRM_SCANOUTPOS_VALID: - * Query successful. - * DRM_SCANOUTPOS_INVBL: - * Inside vblank. - * DRM_SCANOUTPOS_ACCURATE: Returned position is accurate. A lack of - * this flag means that returned position may be offset by a - * constant but unknown small number of scanlines wrt. real scanout - * position. + * FIXME: * + * Since this is a helper to implement @get_vblank_timestamp, we should + * move it to &struct drm_crtc_helper_funcs, like all the other + * helper-internal hooks. */ - int (*get_scanout_position) (struct drm_device *dev, unsigned int pipe, - unsigned int flags, int *vpos, int *hpos, - ktime_t *stime, ktime_t *etime, - const struct drm_display_mode *mode); + bool (*get_scanout_position) (struct drm_device *dev, unsigned int pipe, + bool in_vblank_irq, int *vpos, int *hpos, + ktime_t *stime, ktime_t *etime, + const struct drm_display_mode *mode); /** * @get_vblank_timestamp: @@ -328,28 +307,60 @@ struct drm_driver { * Returns true upper bound on error for timestamp. * vblank_time: * Target location for returned vblank timestamp. - * flags: - * 0 = Defaults, no special treatment needed. - * DRM_CALLED_FROM_VBLIRQ = Function is called from vblank - * irq handler. Some drivers need to apply some workarounds - * for gpu-specific vblank irq quirks if flag is set. + * in_vblank_irq: + * True when called from drm_crtc_handle_vblank(). Some drivers + * need to apply some workarounds for gpu-specific vblank irq quirks + * if flag is set. * * Returns: * - * Zero if timestamping isn't supported in current display mode or a - * negative number on failure. A positive status code on success, - * which describes how the vblank_time timestamp was computed. + * True on success, false on failure, which means the core should + * fallback to a simple timestamp taken in drm_crtc_handle_vblank(). + * + * FIXME: + * + * We should move this hook to &struct drm_crtc_funcs like all the other + * vblank hooks. */ - int (*get_vblank_timestamp) (struct drm_device *dev, unsigned int pipe, + bool (*get_vblank_timestamp) (struct drm_device *dev, unsigned int pipe, int *max_error, struct timeval *vblank_time, - unsigned flags); - - /* these have to be filled in */ + bool in_vblank_irq); + /** + * @irq_handler: + * + * Interrupt handler called when using drm_irq_install(). Not used by + * drivers which implement their own interrupt handling. + */ irqreturn_t(*irq_handler) (int irq, void *arg); + + /** + * @irq_preinstall: + * + * Optional callback used by drm_irq_install() which is called before + * the interrupt handler is registered. This should be used to clear out + * any pending interrupts (from e.g. firmware based drives) and reset + * the interrupt handling registers. + */ void (*irq_preinstall) (struct drm_device *dev); + + /** + * @irq_postinstall: + * + * Optional callback used by drm_irq_install() which is called after + * the interrupt handler is registered. This should be used to enable + * interrupt generation in the hardware. + */ int (*irq_postinstall) (struct drm_device *dev); + + /** + * @irq_uninstall: + * + * Optional callback used by drm_irq_uninstall() which is called before + * the interrupt handler is unregistered. This should be used to disable + * interrupt generation in the hardware. + */ void (*irq_uninstall) (struct drm_device *dev); /** @@ -380,6 +391,11 @@ struct drm_driver { */ void (*master_drop)(struct drm_device *dev, struct drm_file *file_priv); + /** + * @debugfs_init: + * + * Allows drivers to create driver-specific debugfs files. + */ int (*debugfs_init)(struct drm_minor *minor); /** @@ -398,7 +414,18 @@ struct drm_driver { */ void (*gem_free_object_unlocked) (struct drm_gem_object *obj); + /** + * @gem_open_object: + * + * Driver hook called upon gem handle creation + */ int (*gem_open_object) (struct drm_gem_object *, struct drm_file *); + + /** + * @gem_close_object: + * + * Driver hook called upon gem handle release + */ void (*gem_close_object) (struct drm_gem_object *, struct drm_file *); /** @@ -411,19 +438,34 @@ struct drm_driver { size_t size); /* prime: */ - /* export handle -> fd (see drm_gem_prime_handle_to_fd() helper) */ + /** + * @prime_handle_to_fd: + * + * export handle -> fd (see drm_gem_prime_handle_to_fd() helper) + */ int (*prime_handle_to_fd)(struct drm_device *dev, struct drm_file *file_priv, uint32_t handle, uint32_t flags, int *prime_fd); - /* import fd -> handle (see drm_gem_prime_fd_to_handle() helper) */ + /** + * @prime_fd_to_handle: + * + * import fd -> handle (see drm_gem_prime_fd_to_handle() helper) + */ int (*prime_fd_to_handle)(struct drm_device *dev, struct drm_file *file_priv, int prime_fd, uint32_t *handle); - /* export GEM -> dmabuf */ + /** + * @gem_prime_export: + * + * export GEM -> dmabuf + */ struct dma_buf * (*gem_prime_export)(struct drm_device *dev, struct drm_gem_object *obj, int flags); - /* import dmabuf -> GEM */ + /** + * @gem_prime_import: + * + * import dmabuf -> GEM + */ struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev, struct dma_buf *dma_buf); - /* low-level interface used by drm_gem_prime_{import,export} */ int (*gem_prime_pin)(struct drm_gem_object *obj); void (*gem_prime_unpin)(struct drm_gem_object *obj); struct reservation_object * (*gem_prime_res_obj)( @@ -495,19 +537,46 @@ struct drm_driver { struct drm_device *dev, uint32_t handle); - /* Driver private ops for this object */ + /** + * @gem_vm_ops: Driver private ops for this object + */ const struct vm_operations_struct *gem_vm_ops; + /** @major: driver major number */ int major; + /** @minor: driver minor number */ int minor; + /** @patchlevel: driver patch level */ int patchlevel; + /** @name: driver name */ char *name; + /** @desc: driver description */ char *desc; + /** @date: driver date */ char *date; + /** @driver_features: driver features */ u32 driver_features; + + /** + * @ioctls: + * + * Array of driver-private IOCTL description entries. See the chapter on + * :ref:`IOCTL support in the userland interfaces + * chapter<drm_driver_ioctl>` for the full details. + */ + const struct drm_ioctl_desc *ioctls; + /** @num_ioctls: Number of entries in @ioctls. */ int num_ioctls; + + /** + * @fops: + * + * File operations for the DRM device node. See the discussion in + * :ref:`file operations<drm_driver_fops>` for in-depth coverage and + * some examples. + */ const struct file_operations *fops; /* Everything below here is for legacy driver, never use! */ @@ -516,6 +585,7 @@ struct drm_driver { /* List of devices hanging off this driver with stealth attach. */ struct list_head legacy_dev_list; int (*firstopen) (struct drm_device *); + void (*preclose) (struct drm_device *, struct drm_file *file_priv); int (*dma_ioctl) (struct drm_device *dev, void *data, struct drm_file *file_priv); int (*dma_quiescent) (struct drm_device *); int (*context_dtor) (struct drm_device *dev, int context); @@ -544,7 +614,24 @@ void drm_dev_unregister(struct drm_device *dev); void drm_dev_ref(struct drm_device *dev); void drm_dev_unref(struct drm_device *dev); void drm_put_dev(struct drm_device *dev); -void drm_unplug_dev(struct drm_device *dev); +void drm_dev_unplug(struct drm_device *dev); + +/** + * drm_dev_is_unplugged - is a DRM device unplugged + * @dev: DRM device + * + * This function can be called to check whether a hotpluggable is unplugged. + * Unplugging itself is singalled through drm_dev_unplug(). If a device is + * unplugged, these two functions guarantee that any store before calling + * drm_dev_unplug() is visible to callers of this function after it completes + */ +static inline int drm_dev_is_unplugged(struct drm_device *dev) +{ + int ret = atomic_read(&dev->unplugged); + smp_rmb(); + return ret; +} + int drm_dev_set_unique(struct drm_device *dev, const char *name); diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 7b9f48b62e07..1e1908a6b1d6 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -213,6 +213,14 @@ struct detailed_timing { #define DRM_EDID_HDMI_DC_30 (1 << 4) #define DRM_EDID_HDMI_DC_Y444 (1 << 3) +/* YCBCR 420 deep color modes */ +#define DRM_EDID_YCBCR420_DC_48 (1 << 6) +#define DRM_EDID_YCBCR420_DC_36 (1 << 5) +#define DRM_EDID_YCBCR420_DC_30 (1 << 4) +#define DRM_EDID_YCBCR420_DC_MASK (DRM_EDID_YCBCR420_DC_48 | \ + DRM_EDID_YCBCR420_DC_36 | \ + DRM_EDID_YCBCR420_DC_30) + /* ELD Header Block */ #define DRM_ELD_HEADER_BLOCK_SIZE 4 @@ -343,7 +351,8 @@ drm_load_edid_firmware(struct drm_connector *connector) int drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame, - const struct drm_display_mode *mode); + const struct drm_display_mode *mode, + bool is_hdmi2_sink); int drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame, const struct drm_display_mode *mode); diff --git a/include/drm/drm_fb_cma_helper.h b/include/drm/drm_fb_cma_helper.h index a5ecc0a58260..a323781afc3f 100644 --- a/include/drm/drm_fb_cma_helper.h +++ b/include/drm/drm_fb_cma_helper.h @@ -24,9 +24,9 @@ void drm_fbdev_cma_fini(struct drm_fbdev_cma *fbdev_cma); void drm_fbdev_cma_restore_mode(struct drm_fbdev_cma *fbdev_cma); void drm_fbdev_cma_hotplug_event(struct drm_fbdev_cma *fbdev_cma); -void drm_fbdev_cma_set_suspend(struct drm_fbdev_cma *fbdev_cma, int state); +void drm_fbdev_cma_set_suspend(struct drm_fbdev_cma *fbdev_cma, bool state); void drm_fbdev_cma_set_suspend_unlocked(struct drm_fbdev_cma *fbdev_cma, - int state); + bool state); void drm_fb_cma_destroy(struct drm_framebuffer *fb); int drm_fb_cma_create_handle(struct drm_framebuffer *fb, @@ -41,6 +41,10 @@ struct drm_framebuffer *drm_fb_cma_create(struct drm_device *dev, struct drm_gem_cma_object *drm_fb_cma_get_gem_obj(struct drm_framebuffer *fb, unsigned int plane); +dma_addr_t drm_fb_cma_get_gem_addr(struct drm_framebuffer *fb, + struct drm_plane_state *state, + unsigned int plane); + int drm_fb_cma_prepare_fb(struct drm_plane *plane, struct drm_plane_state *state); diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index 119e5e4609c7..33fe95927742 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -85,38 +85,6 @@ struct drm_fb_helper_surface_size { */ struct drm_fb_helper_funcs { /** - * @gamma_set: - * - * Set the given gamma LUT register on the given CRTC. - * - * This callback is optional. - * - * FIXME: - * - * This callback is functionally redundant with the core gamma table - * support and simply exists because the fbdev hasn't yet been - * refactored to use the core gamma table interfaces. - */ - void (*gamma_set)(struct drm_crtc *crtc, u16 red, u16 green, - u16 blue, int regno); - /** - * @gamma_get: - * - * Read the given gamma LUT register on the given CRTC, used to save the - * current LUT when force-restoring the fbdev for e.g. kdbg. - * - * This callback is optional. - * - * FIXME: - * - * This callback is functionally redundant with the core gamma table - * support and simply exists because the fbdev hasn't yet been - * refactored to use the core gamma table interfaces. - */ - void (*gamma_get)(struct drm_crtc *crtc, u16 *red, u16 *green, - u16 *blue, int regno); - - /** * @fb_probe: * * Driver callback to allocate and initialize the fbdev info structure. @@ -169,7 +137,6 @@ struct drm_fb_helper_connector { * @crtc_info: per-CRTC helper state (mode, x/y offset, etc) * @connector_count: number of connected connectors * @connector_info_alloc_count: size of connector_info - * @connector_info: array of per-connector information * @funcs: driver callbacks for fb helper * @fbdev: emulated fbdev device info struct * @pseudo_palette: fake palette of 16 colors @@ -191,6 +158,12 @@ struct drm_fb_helper { struct drm_fb_helper_crtc *crtc_info; int connector_count; int connector_info_alloc_count; + /** + * @connector_info: + * + * Array of per-connector information. Do not iterate directly, but use + * drm_fb_helper_for_each_connector. + */ struct drm_fb_helper_connector **connector_info; const struct drm_fb_helper_funcs *funcs; struct fb_info *fbdev; @@ -201,6 +174,18 @@ struct drm_fb_helper { struct work_struct resume_work; /** + * @lock: + * + * Top-level FBDEV helper lock. This protects all internal data + * structures and lists, such as @connector_info and @crtc_info. + * + * FIXME: fbdev emulation locking is a mess and long term we want to + * protect all helper internal state with this lock as well as reduce + * core KMS locking as much as possible. + */ + struct mutex lock; + + /** * @kernel_fb_list: * * Entry on the global kernel_fb_helper_list, used for kgdb entry/exit. @@ -215,6 +200,29 @@ struct drm_fb_helper { * needs to be reprobe when fbdev is in control again. */ bool delayed_hotplug; + + /** + * @deferred_setup: + * + * If no outputs are connected (disconnected or unknown) the FB helper + * code will defer setup until at least one of the outputs shows up. + * This field keeps track of the status so that setup can be retried + * at every hotplug event until it succeeds eventually. + * + * Protected by @lock. + */ + bool deferred_setup; + + /** + * @preferred_bpp: + * + * Temporary storage for the driver's preferred BPP setting passed to + * FB helper initialization. This needs to be tracked so that deferred + * FB helper setup can pass this on. + * + * See also: @deferred_setup + */ + int preferred_bpp; }; /** diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h index 5dd27ae5c47c..0e0c868451a5 100644 --- a/include/drm/drm_file.h +++ b/include/drm/drm_file.h @@ -40,6 +40,7 @@ struct dma_fence; struct drm_file; struct drm_device; +struct device; /* * FIXME: Not sure we want to have drm_minor here in the end, but to avoid @@ -231,6 +232,11 @@ struct drm_file { /** @table_lock: Protects @object_idr. */ spinlock_t table_lock; + /** @syncobj_idr: Mapping of sync object handles to object pointers. */ + struct idr syncobj_idr; + /** @syncobj_table_lock: Protects @syncobj_idr. */ + spinlock_t syncobj_table_lock; + /** @filp: Pointer to the core file structure. */ struct file *filp; diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h index 5244f059d23a..b6996ddb19d6 100644 --- a/include/drm/drm_framebuffer.h +++ b/include/drm/drm_framebuffer.h @@ -190,6 +190,13 @@ struct drm_framebuffer { * @filp_head: Placed on &drm_file.fbs, protected by &drm_file.fbs_lock. */ struct list_head filp_head; + /** + * @obj: GEM objects backing the framebuffer, one per plane (optional). + * + * This is used by the GEM framebuffer helpers, see e.g. + * drm_gem_fb_create(). + */ + struct drm_gem_object *obj[4]; }; #define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) diff --git a/include/drm/drm_gem.h b/include/drm/drm_gem.h index 663d80358057..9c55c2acaa2b 100644 --- a/include/drm/drm_gem.h +++ b/include/drm/drm_gem.h @@ -131,21 +131,6 @@ struct drm_gem_object { uint32_t write_domain; /** - * @pending_read_domains: - * - * While validating an exec operation, the - * new read/write domain values are computed here. - * They will be transferred to the above values - * at the point that any cache flushing occurs - */ - uint32_t pending_read_domains; - - /** - * @pending_write_domain: Write domain similar to @pending_read_domains. - */ - uint32_t pending_write_domain; - - /** * @dma_buf: * * dma-buf associated with this GEM object. @@ -317,6 +302,8 @@ void drm_gem_put_pages(struct drm_gem_object *obj, struct page **pages, bool dirty, bool accessed); struct drm_gem_object *drm_gem_object_lookup(struct drm_file *filp, u32 handle); +int drm_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev, + u32 handle, u64 *offset); int drm_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev, uint32_t handle); diff --git a/include/drm/drm_gem_cma_helper.h b/include/drm/drm_gem_cma_helper.h index f962d33667cf..58a739bf15f1 100644 --- a/include/drm/drm_gem_cma_helper.h +++ b/include/drm/drm_gem_cma_helper.h @@ -26,6 +26,13 @@ to_drm_gem_cma_obj(struct drm_gem_object *gem_obj) return container_of(gem_obj, struct drm_gem_cma_object, base); } +#ifndef CONFIG_MMU +#define DRM_GEM_CMA_UNMAPPED_AREA_FOPS \ + .get_unmapped_area = drm_gem_cma_get_unmapped_area, +#else +#define DRM_GEM_CMA_UNMAPPED_AREA_FOPS +#endif + /** * DEFINE_DRM_GEM_CMA_FOPS() - macro to generate file operations for CMA drivers * @name: name for the generated structure @@ -50,6 +57,7 @@ to_drm_gem_cma_obj(struct drm_gem_object *gem_obj) .read = drm_read,\ .llseek = noop_llseek,\ .mmap = drm_gem_cma_mmap,\ + DRM_GEM_CMA_UNMAPPED_AREA_FOPS \ } /* free GEM object */ @@ -65,11 +73,6 @@ int drm_gem_cma_dumb_create(struct drm_file *file_priv, struct drm_device *drm, struct drm_mode_create_dumb *args); -/* map memory region for DRM framebuffer to user space */ -int drm_gem_cma_dumb_map_offset(struct drm_file *file_priv, - struct drm_device *drm, u32 handle, - u64 *offset); - /* set vm_flags and we can change the VM attribute to other one at here */ int drm_gem_cma_mmap(struct file *filp, struct vm_area_struct *vma); @@ -85,15 +88,6 @@ unsigned long drm_gem_cma_get_unmapped_area(struct file *filp, unsigned long len, unsigned long pgoff, unsigned long flags); -#else -static inline unsigned long drm_gem_cma_get_unmapped_area(struct file *filp, - unsigned long addr, - unsigned long len, - unsigned long pgoff, - unsigned long flags) -{ - return -EINVAL; -} #endif #ifdef CONFIG_DEBUG_FS diff --git a/include/drm/drm_gem_framebuffer_helper.h b/include/drm/drm_gem_framebuffer_helper.h new file mode 100644 index 000000000000..db9cfa07235e --- /dev/null +++ b/include/drm/drm_gem_framebuffer_helper.h @@ -0,0 +1,37 @@ +#ifndef __DRM_GEM_FB_HELPER_H__ +#define __DRM_GEM_FB_HELPER_H__ + +struct drm_device; +struct drm_file; +struct drm_fb_helper_surface_size; +struct drm_framebuffer; +struct drm_framebuffer_funcs; +struct drm_gem_object; +struct drm_mode_fb_cmd2; +struct drm_plane; +struct drm_plane_state; + +struct drm_gem_object *drm_gem_fb_get_obj(struct drm_framebuffer *fb, + unsigned int plane); +void drm_gem_fb_destroy(struct drm_framebuffer *fb); +int drm_gem_fb_create_handle(struct drm_framebuffer *fb, struct drm_file *file, + unsigned int *handle); + +struct drm_framebuffer * +drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file, + const struct drm_mode_fb_cmd2 *mode_cmd, + const struct drm_framebuffer_funcs *funcs); +struct drm_framebuffer * +drm_gem_fb_create(struct drm_device *dev, struct drm_file *file, + const struct drm_mode_fb_cmd2 *mode_cmd); + +int drm_gem_fb_prepare_fb(struct drm_plane *plane, + struct drm_plane_state *state); + +struct drm_framebuffer * +drm_gem_fbdev_fb_create(struct drm_device *dev, + struct drm_fb_helper_surface_size *sizes, + unsigned int pitch_align, struct drm_gem_object *obj, + const struct drm_framebuffer_funcs *funcs); + +#endif diff --git a/include/drm/drm_ioctl.h b/include/drm/drm_ioctl.h index ee03b3c44b3b..add42809642a 100644 --- a/include/drm/drm_ioctl.h +++ b/include/drm/drm_ioctl.h @@ -172,6 +172,7 @@ struct drm_ioctl_desc { int drm_ioctl_permit(u32 flags, struct drm_file *file_priv); long drm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); +long drm_ioctl_kernel(struct file *, drm_ioctl_t, void *, u32); #ifdef CONFIG_COMPAT long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #else diff --git a/include/drm/drm_irq.h b/include/drm/drm_irq.h index cf0be6594c8c..d77f6e65b1c6 100644 --- a/include/drm/drm_irq.h +++ b/include/drm/drm_irq.h @@ -24,154 +24,9 @@ #ifndef _DRM_IRQ_H_ #define _DRM_IRQ_H_ -#include <linux/seqlock.h> - -/** - * struct drm_pending_vblank_event - pending vblank event tracking - */ -struct drm_pending_vblank_event { - /** - * @base: Base structure for tracking pending DRM events. - */ - struct drm_pending_event base; - /** - * @pipe: drm_crtc_index() of the &drm_crtc this event is for. - */ - unsigned int pipe; - /** - * @event: Actual event which will be sent to userspace. - */ - struct drm_event_vblank event; -}; - -/** - * struct drm_vblank_crtc - vblank tracking for a CRTC - * - * This structure tracks the vblank state for one CRTC. - * - * Note that for historical reasons - the vblank handling code is still shared - * with legacy/non-kms drivers - this is a free-standing structure not directly - * connected to &struct drm_crtc. But all public interface functions are taking - * a &struct drm_crtc to hide this implementation detail. - */ -struct drm_vblank_crtc { - /** - * @dev: Pointer to the &drm_device. - */ - struct drm_device *dev; - /** - * @queue: Wait queue for vblank waiters. - */ - wait_queue_head_t queue; /**< VBLANK wait queue */ - /** - * @disable_timer: Disable timer for the delayed vblank disabling - * hysteresis logic. Vblank disabling is controlled through the - * drm_vblank_offdelay module option and the setting of the - * &drm_device.max_vblank_count value. - */ - struct timer_list disable_timer; - - /** - * @seqlock: Protect vblank count and time. - */ - seqlock_t seqlock; /* protects vblank count and time */ - - /** - * @count: Current software vblank counter. - */ - u32 count; - /** - * @time: Vblank timestamp corresponding to @count. - */ - struct timeval time; - - /** - * @refcount: Number of users/waiters of the vblank interrupt. Only when - * this refcount reaches 0 can the hardware interrupt be disabled using - * @disable_timer. - */ - atomic_t refcount; /* number of users of vblank interruptsper crtc */ - /** - * @last: Protected by &drm_device.vbl_lock, used for wraparound handling. - */ - u32 last; - /** - * @inmodeset: Tracks whether the vblank is disabled due to a modeset. - * For legacy driver bit 2 additionally tracks whether an additional - * temporary vblank reference has been acquired to paper over the - * hardware counter resetting/jumping. KMS drivers should instead just - * call drm_crtc_vblank_off() and drm_crtc_vblank_on(), which explicitly - * save and restore the vblank count. - */ - unsigned int inmodeset; /* Display driver is setting mode */ - /** - * @pipe: drm_crtc_index() of the &drm_crtc corresponding to this - * structure. - */ - unsigned int pipe; - /** - * @framedur_ns: Frame/Field duration in ns, used by - * drm_calc_vbltimestamp_from_scanoutpos() and computed by - * drm_calc_timestamping_constants(). - */ - int framedur_ns; - /** - * @linedur_ns: Line duration in ns, used by - * drm_calc_vbltimestamp_from_scanoutpos() and computed by - * drm_calc_timestamping_constants(). - */ - int linedur_ns; - /** - * @enabled: Tracks the enabling state of the corresponding &drm_crtc to - * avoid double-disabling and hence corrupting saved state. Needed by - * drivers not using atomic KMS, since those might go through their CRTC - * disabling functions multiple times. - */ - bool enabled; -}; +struct drm_device; int drm_irq_install(struct drm_device *dev, int irq); int drm_irq_uninstall(struct drm_device *dev); -int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs); -u32 drm_crtc_vblank_count(struct drm_crtc *crtc); -u32 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc, - struct timeval *vblanktime); -void drm_crtc_send_vblank_event(struct drm_crtc *crtc, - struct drm_pending_vblank_event *e); -void drm_crtc_arm_vblank_event(struct drm_crtc *crtc, - struct drm_pending_vblank_event *e); -bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe); -bool drm_crtc_handle_vblank(struct drm_crtc *crtc); -int drm_crtc_vblank_get(struct drm_crtc *crtc); -void drm_crtc_vblank_put(struct drm_crtc *crtc); -void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe); -void drm_crtc_wait_one_vblank(struct drm_crtc *crtc); -void drm_crtc_vblank_off(struct drm_crtc *crtc); -void drm_crtc_vblank_reset(struct drm_crtc *crtc); -void drm_crtc_vblank_on(struct drm_crtc *crtc); -void drm_vblank_cleanup(struct drm_device *dev); -u32 drm_accurate_vblank_count(struct drm_crtc *crtc); - -int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, - unsigned int pipe, int *max_error, - struct timeval *vblank_time, - unsigned flags, - const struct drm_display_mode *mode); -void drm_calc_timestamping_constants(struct drm_crtc *crtc, - const struct drm_display_mode *mode); - -/** - * drm_crtc_vblank_waitqueue - get vblank waitqueue for the CRTC - * @crtc: which CRTC's vblank waitqueue to retrieve - * - * This function returns a pointer to the vblank waitqueue for the CRTC. - * Drivers can use this to implement vblank waits using wait_event() and related - * functions. - */ -static inline wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc) -{ - return &crtc->dev->vblank[drm_crtc_index(crtc)].queue; -} - #endif diff --git a/include/drm/drm_mem_util.h b/include/drm/drm_mem_util.h deleted file mode 100644 index d0f6cf2e5324..000000000000 --- a/include/drm/drm_mem_util.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright © 2008 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS - * IN THE SOFTWARE. - * - * Authors: - * Jesse Barnes <jbarnes@virtuousgeek.org> - * - */ -#ifndef _DRM_MEM_UTIL_H_ -#define _DRM_MEM_UTIL_H_ - -#include <linux/vmalloc.h> - -static __inline__ void *drm_calloc_large(size_t nmemb, size_t size) -{ - if (size != 0 && nmemb > SIZE_MAX / size) - return NULL; - - if (size * nmemb <= PAGE_SIZE) - return kcalloc(nmemb, size, GFP_KERNEL); - - return vzalloc(size * nmemb); -} - -/* Modeled after cairo's malloc_ab, it's like calloc but without the zeroing. */ -static __inline__ void *drm_malloc_ab(size_t nmemb, size_t size) -{ - if (size != 0 && nmemb > SIZE_MAX / size) - return NULL; - - if (size * nmemb <= PAGE_SIZE) - return kmalloc(nmemb * size, GFP_KERNEL); - - return vmalloc(size * nmemb); -} - -static __inline__ void *drm_malloc_gfp(size_t nmemb, size_t size, gfp_t gfp) -{ - if (size != 0 && nmemb > SIZE_MAX / size) - return NULL; - - if (size * nmemb <= PAGE_SIZE) - return kmalloc(nmemb * size, gfp); - - if (gfp & __GFP_RECLAIMABLE) { - void *ptr = kmalloc(nmemb * size, - gfp | __GFP_NOWARN | __GFP_NORETRY); - if (ptr) - return ptr; - } - - return __vmalloc(size * nmemb, gfp, PAGE_KERNEL); -} - -static __inline void drm_free_large(void *ptr) -{ - kvfree(ptr); -} - -#endif diff --git a/include/drm/drm_mm.h b/include/drm/drm_mm.h index 49b292e98fec..8d10fc97801c 100644 --- a/include/drm/drm_mm.h +++ b/include/drm/drm_mm.h @@ -172,7 +172,7 @@ struct drm_mm { * according to the (increasing) start address of the memory node. */ struct drm_mm_node head_node; /* Keep an interval_tree for fast lookup of drm_mm_nodes by address. */ - struct rb_root interval_tree; + struct rb_root_cached interval_tree; struct rb_root holes_size; struct rb_root holes_addr; diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 42981711189b..1b37368416c8 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -757,6 +757,12 @@ struct drm_mode_config { */ bool allow_fb_modifiers; + /** + * @modifiers: Plane property to list support modifier/format + * combination. + */ + struct drm_property *modifiers_property; + /* cursor size */ uint32_t cursor_width, cursor_height; diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index 6dd34280e892..9f3421c8efcd 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -80,6 +80,7 @@ struct videomode; * @MODE_ONE_SIZE: only one resolution is supported * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking * @MODE_NO_STEREO: stereo modes not supported + * @MODE_NO_420: ycbcr 420 modes not supported * @MODE_STALE: mode has become stale * @MODE_BAD: unspecified reason * @MODE_ERROR: error condition @@ -124,6 +125,7 @@ enum drm_mode_status { MODE_ONE_SIZE, MODE_NO_REDUCED, MODE_NO_STEREO, + MODE_NO_420, MODE_STALE = -3, MODE_BAD = -2, MODE_ERROR = -1 @@ -197,6 +199,8 @@ enum drm_mode_status { * there's the hardware timings, which are corrected for interlacing, * double-clocking and similar things. They are provided as a convenience, and * can be appropriately computed using drm_mode_set_crtcinfo(). + * + * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG(). */ struct drm_display_mode { /** @@ -407,6 +411,21 @@ struct drm_display_mode { enum hdmi_picture_aspect picture_aspect_ratio; }; +/** + * DRM_MODE_FMT - printf string for &struct drm_display_mode + */ +#define DRM_MODE_FMT "%d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x" + +/** + * DRM_MODE_ARG - printf arguments for &struct drm_display_mode + * @m: display mode + */ +#define DRM_MODE_ARG(m) \ + (m)->base.id, (m)->name, (m)->vrefresh, (m)->clock, \ + (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \ + (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \ + (m)->type, (m)->flags + #define obj_to_mode(x) container_of(x, struct drm_display_mode, base) /** @@ -433,6 +452,12 @@ int drm_mode_convert_umode(struct drm_display_mode *out, const struct drm_mode_modeinfo *in); void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); void drm_mode_debug_printmodeline(const struct drm_display_mode *mode); +bool drm_mode_is_420_only(const struct drm_display_info *display, + const struct drm_display_mode *mode); +bool drm_mode_is_420_also(const struct drm_display_info *display, + const struct drm_display_mode *mode); +bool drm_mode_is_420(const struct drm_display_info *display, + const struct drm_display_mode *mode); struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, @@ -479,6 +504,9 @@ bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, enum drm_mode_status drm_mode_validate_basic(const struct drm_display_mode *mode); enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode, int maxX, int maxY); +enum drm_mode_status +drm_mode_validate_ycbcr420(const struct drm_display_mode *mode, + struct drm_connector *connector); void drm_mode_prune_invalid(struct drm_device *dev, struct list_head *mode_list, bool verbose); void drm_mode_sort(struct list_head *mode_list); diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index c01c328f6cc8..c55cf3ff6847 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -71,7 +71,7 @@ struct drm_crtc_helper_funcs { * This callback is used by the legacy CRTC helpers. Atomic helpers * also support using this hook for enabling and disabling a CRTC to * facilitate transitions to atomic, but it is deprecated. Instead - * @enable and @disable should be used. + * @atomic_enable and @atomic_disable should be used. */ void (*dpms)(struct drm_crtc *crtc, int mode); @@ -85,8 +85,8 @@ struct drm_crtc_helper_funcs { * * This callback is used by the legacy CRTC helpers. Atomic helpers * also support using this hook for disabling a CRTC to facilitate - * transitions to atomic, but it is deprecated. Instead @disable should - * be used. + * transitions to atomic, but it is deprecated. Instead @atomic_disable + * should be used. */ void (*prepare)(struct drm_crtc *crtc); @@ -100,12 +100,46 @@ struct drm_crtc_helper_funcs { * * This callback is used by the legacy CRTC helpers. Atomic helpers * also support using this hook for enabling a CRTC to facilitate - * transitions to atomic, but it is deprecated. Instead @enable should - * be used. + * transitions to atomic, but it is deprecated. Instead @atomic_enable + * should be used. */ void (*commit)(struct drm_crtc *crtc); /** + * @mode_valid: + * + * This callback is used to check if a specific mode is valid in this + * crtc. This should be implemented if the crtc has some sort of + * restriction in the modes it can display. For example, a given crtc + * may be responsible to set a clock value. If the clock can not + * produce all the values for the available modes then this callback + * can be used to restrict the number of modes to only the ones that + * can be displayed. + * + * This hook is used by the probe helpers to filter the mode list in + * drm_helper_probe_single_connector_modes(), and it is used by the + * atomic helpers to validate modes supplied by userspace in + * drm_atomic_helper_check_modeset(). + * + * This function is optional. + * + * NOTE: + * + * Since this function is both called from the check phase of an atomic + * commit, and the mode validation in the probe paths it is not allowed + * to look at anything else but the passed-in mode, and validate it + * against configuration-invariant hardward constraints. Any further + * limits which depend upon the configuration can only be checked in + * @mode_fixup or @atomic_check. + * + * RETURNS: + * + * drm_mode_status Enum + */ + enum drm_mode_status (*mode_valid)(struct drm_crtc *crtc, + const struct drm_display_mode *mode); + + /** * @mode_fixup: * * This callback is used to validate a mode. The parameter mode is the @@ -113,7 +147,8 @@ struct drm_crtc_helper_funcs { * encoders need to be fed with. Note that this is the inverse semantics * of the meaning for the &drm_encoder and &drm_bridge_funcs.mode_fixup * vfunc. If the CRTC cannot support the requested conversion from mode - * to adjusted_mode it should reject the modeset. + * to adjusted_mode it should reject the modeset. See also + * &drm_crtc_state.adjusted_mode for more details. * * This function is used by both legacy CRTC helpers and atomic helpers. * With atomic helpers it is optional. @@ -130,22 +165,17 @@ struct drm_crtc_helper_funcs { * allowed. * * Atomic drivers which need to inspect and adjust more state should - * instead use the @atomic_check callback. - * - * Also beware that neither core nor helpers filter modes before - * passing them to the driver: While the list of modes that is - * advertised to userspace is filtered using the - * &drm_connector.mode_valid callback, neither the core nor the helpers - * do any filtering on modes passed in from userspace when setting a - * mode. It is therefore possible for userspace to pass in a mode that - * was previously filtered out using &drm_connector.mode_valid or add a - * custom mode that wasn't probed from EDID or similar to begin with. - * Even though this is an advanced feature and rarely used nowadays, - * some users rely on being able to specify modes manually so drivers - * must be prepared to deal with it. Specifically this means that all - * drivers need not only validate modes in &drm_connector.mode_valid but - * also in this or in the &drm_encoder_helper_funcs.mode_fixup callback - * to make sure invalid modes passed in from userspace are rejected. + * instead use the @atomic_check callback, but note that they're not + * perfectly equivalent: @mode_valid is called from + * drm_atomic_helper_check_modeset(), but @atomic_check is called from + * drm_atomic_helper_check_planes(), because originally it was meant for + * plane update checks only. + * + * Also beware that userspace can request its own custom modes, neither + * core nor helpers filter modes to the list of probe modes reported by + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure + * that modes are filtered consistently put any CRTC constraints and + * limits checks into @mode_valid. * * RETURNS: * @@ -192,7 +222,7 @@ struct drm_crtc_helper_funcs { * pipeline is suspended using either DPMS or the new "ACTIVE" property. * Which means register values set in this callback might get reset when * the CRTC is suspended, but not restored. Such drivers should instead - * move all their CRTC setup into the @enable callback. + * move all their CRTC setup into the @atomic_enable callback. * * This callback is optional. */ @@ -237,22 +267,6 @@ struct drm_crtc_helper_funcs { enum mode_set_atomic); /** - * @load_lut: - * - * Load a LUT prepared with the &drm_fb_helper_funcs.gamma_set vfunc. - * - * This callback is optional and is only used by the fbdev emulation - * helpers. - * - * FIXME: - * - * This callback is functionally redundant with the core gamma table - * support and simply exists because the fbdev hasn't yet been - * refactored to use the core gamma table interfaces. - */ - void (*load_lut)(struct drm_crtc *crtc); - - /** * @disable: * * This callback should be used to disable the CRTC. With the atomic @@ -267,7 +281,7 @@ struct drm_crtc_helper_funcs { * Atomic drivers don't need to implement it if there's no need to * disable anything at the CRTC level. To ensure that runtime PM * handling (using either DPMS or the new "ACTIVE" property) works - * @disable must be the inverse of @enable for atomic drivers. + * @disable must be the inverse of @atomic_enable for atomic drivers. * Atomic drivers should consider to use @atomic_disable instead of * this one. * @@ -286,24 +300,6 @@ struct drm_crtc_helper_funcs { void (*disable)(struct drm_crtc *crtc); /** - * @enable: - * - * This callback should be used to enable the CRTC. With the atomic - * drivers it is called before all encoders connected to this CRTC are - * enabled through the encoder's own &drm_encoder_helper_funcs.enable - * hook. If that sequence is too simple drivers can just add their own - * hooks and call it from this CRTC callback here by looping over all - * encoders connected to it using for_each_encoder_on_crtc(). - * - * This hook is used only by atomic helpers, for symmetry with @disable. - * Atomic drivers don't need to implement it if there's no need to - * enable anything at the CRTC level. To ensure that runtime PM handling - * (using either DPMS or the new "ACTIVE" property) works - * @enable must be the inverse of @disable for atomic drivers. - */ - void (*enable)(struct drm_crtc *crtc); - - /** * @atomic_check: * * Drivers should check plane-update related CRTC constraints in this @@ -341,6 +337,12 @@ struct drm_crtc_helper_funcs { * state objects passed-in or assembled in the overall &drm_atomic_state * update tracking structure. * + * Also beware that userspace can request its own custom modes, neither + * core nor helpers filter modes to the list of probe modes reported by + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure + * that modes are filtered consistently put any CRTC constraints and + * limits checks into @mode_valid. + * * RETURNS: * * 0 on success, -EINVAL if the state or the transition can't be @@ -397,6 +399,30 @@ struct drm_crtc_helper_funcs { struct drm_crtc_state *old_crtc_state); /** + * @atomic_enable: + * + * This callback should be used to enable the CRTC. With the atomic + * drivers it is called before all encoders connected to this CRTC are + * enabled through the encoder's own &drm_encoder_helper_funcs.enable + * hook. If that sequence is too simple drivers can just add their own + * hooks and call it from this CRTC callback here by looping over all + * encoders connected to it using for_each_encoder_on_crtc(). + * + * This hook is used only by atomic helpers, for symmetry with + * @atomic_disable. Atomic drivers don't need to implement it if there's + * no need to enable anything at the CRTC level. To ensure that runtime + * PM handling (using either DPMS or the new "ACTIVE" property) works + * @atomic_enable must be the inverse of @atomic_disable for atomic + * drivers. + * + * Drivers can use the @old_crtc_state input parameter if the operations + * needed to enable the CRTC don't depend solely on the new state but + * also on the transition between the old state and the new state. + */ + void (*atomic_enable)(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state); + + /** * @atomic_disable: * * This callback should be used to disable the CRTC. With the atomic @@ -457,13 +483,48 @@ struct drm_encoder_helper_funcs { void (*dpms)(struct drm_encoder *encoder, int mode); /** + * @mode_valid: + * + * This callback is used to check if a specific mode is valid in this + * encoder. This should be implemented if the encoder has some sort + * of restriction in the modes it can display. For example, a given + * encoder may be responsible to set a clock value. If the clock can + * not produce all the values for the available modes then this callback + * can be used to restrict the number of modes to only the ones that + * can be displayed. + * + * This hook is used by the probe helpers to filter the mode list in + * drm_helper_probe_single_connector_modes(), and it is used by the + * atomic helpers to validate modes supplied by userspace in + * drm_atomic_helper_check_modeset(). + * + * This function is optional. + * + * NOTE: + * + * Since this function is both called from the check phase of an atomic + * commit, and the mode validation in the probe paths it is not allowed + * to look at anything else but the passed-in mode, and validate it + * against configuration-invariant hardward constraints. Any further + * limits which depend upon the configuration can only be checked in + * @mode_fixup or @atomic_check. + * + * RETURNS: + * + * drm_mode_status Enum + */ + enum drm_mode_status (*mode_valid)(struct drm_encoder *crtc, + const struct drm_display_mode *mode); + + /** * @mode_fixup: * * This callback is used to validate and adjust a mode. The parameter * mode is the display mode that should be fed to the next element in * the display chain, either the final &drm_connector or a &drm_bridge. * The parameter adjusted_mode is the input mode the encoder requires. It - * can be modified by this callback and does not need to match mode. + * can be modified by this callback and does not need to match mode. See + * also &drm_crtc_state.adjusted_mode for more details. * * This function is used by both legacy CRTC helpers and atomic helpers. * This hook is optional. @@ -480,23 +541,15 @@ struct drm_encoder_helper_funcs { * allowed. * * Atomic drivers which need to inspect and adjust more state should - * instead use the @atomic_check callback. - * - * Also beware that neither core nor helpers filter modes before - * passing them to the driver: While the list of modes that is - * advertised to userspace is filtered using the connector's - * &drm_connector_helper_funcs.mode_valid callback, neither the core nor - * the helpers do any filtering on modes passed in from userspace when - * setting a mode. It is therefore possible for userspace to pass in a - * mode that was previously filtered out using - * &drm_connector_helper_funcs.mode_valid or add a custom mode that - * wasn't probed from EDID or similar to begin with. Even though this - * is an advanced feature and rarely used nowadays, some users rely on - * being able to specify modes manually so drivers must be prepared to - * deal with it. Specifically this means that all drivers need not only - * validate modes in &drm_connector.mode_valid but also in this or in - * the &drm_crtc_helper_funcs.mode_fixup callback to make sure - * invalid modes passed in from userspace are rejected. + * instead use the @atomic_check callback. If @atomic_check is used, + * this hook isn't called since @atomic_check allows a strict superset + * of the functionality of @mode_fixup. + * + * Also beware that userspace can request its own custom modes, neither + * core nor helpers filter modes to the list of probe modes reported by + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure + * that modes are filtered consistently put any encoder constraints and + * limits checks into @mode_valid. * * RETURNS: * @@ -677,6 +730,11 @@ struct drm_encoder_helper_funcs { * update the CRTC to match what the encoder needs for the requested * connector. * + * Since this provides a strict superset of the functionality of + * @mode_fixup (the requested and adjusted modes are both available + * through the passed in &struct drm_crtc_state) @mode_fixup is not + * called when @atomic_check is implemented. + * * This function is used by the atomic helpers, but it is optional. * * NOTE: @@ -686,6 +744,12 @@ struct drm_encoder_helper_funcs { * state objects passed-in or assembled in the overall &drm_atomic_state * update tracking structure. * + * Also beware that userspace can request its own custom modes, neither + * core nor helpers filter modes to the list of probe modes reported by + * the GETCONNECTOR IOCTL and stored in &drm_connector.modes. To ensure + * that modes are filtered consistently put any encoder constraints and + * limits checks into @mode_valid. + * * RETURNS: * * 0 on success, -EINVAL if the state or the transition can't be @@ -795,13 +859,20 @@ struct drm_connector_helper_funcs { * (which is usually derived from the EDID data block from the sink). * See e.g. drm_helper_probe_single_connector_modes(). * + * This function is optional. + * * NOTE: * * This only filters the mode list supplied to userspace in the - * GETCONNECOTR IOCTL. Userspace is free to create modes of its own and - * ask the kernel to use them. It this case the atomic helpers or legacy - * CRTC helpers will not call this function. Drivers therefore must - * still fully validate any mode passed in in a modeset request. + * GETCONNECTOR IOCTL. Compared to &drm_encoder_helper_funcs.mode_valid, + * &drm_crtc_helper_funcs.mode_valid and &drm_bridge_funcs.mode_valid, + * which are also called by the atomic helpers from + * drm_atomic_helper_check_modeset(). This allows userspace to force and + * ignore sink constraint (like the pixel clock limits in the screen's + * EDID), which is useful for e.g. testing, or working around a broken + * EDID. Any source hardware constraint (which always need to be + * enforced) therefore should be checked in one of the above callbacks, + * and not this one here. * * To avoid races with concurrent connector state updates, the helper * libraries always call this with the &drm_mode_config.connection_mutex @@ -1048,6 +1119,56 @@ struct drm_plane_helper_funcs { */ void (*atomic_disable)(struct drm_plane *plane, struct drm_plane_state *old_state); + + /** + * @atomic_async_check: + * + * Drivers should set this function pointer to check if the plane state + * can be updated in a async fashion. Here async means "not vblank + * synchronized". + * + * This hook is called by drm_atomic_async_check() to establish if a + * given update can be committed asynchronously, that is, if it can + * jump ahead of the state currently queued for update. + * + * RETURNS: + * + * Return 0 on success and any error returned indicates that the update + * can not be applied in asynchronous manner. + */ + int (*atomic_async_check)(struct drm_plane *plane, + struct drm_plane_state *state); + + /** + * @atomic_async_update: + * + * Drivers should set this function pointer to perform asynchronous + * updates of planes, that is, jump ahead of the currently queued + * state and update the plane. Here async means "not vblank + * synchronized". + * + * This hook is called by drm_atomic_helper_async_commit(). + * + * An async update will happen on legacy cursor updates. An async + * update won't happen if there is an outstanding commit modifying + * the same plane. + * + * Note that unlike &drm_plane_helper_funcs.atomic_update this hook + * takes the new &drm_plane_state as parameter. When doing async_update + * drivers shouldn't replace the &drm_plane_state but update the + * current one with the new plane configurations in the new + * plane_state. + * + * FIXME: + * - It only works for single plane updates + * - Async Pageflips are not supported yet + * - Some hw might still scan out the old buffer until the next + * vblank, however we let go of the fb references as soon as + * we run this hook. For now drivers must implement their own workers + * for deferring if needed, until a common solution is created. + */ + void (*atomic_async_update)(struct drm_plane *plane, + struct drm_plane_state *new_state); }; /** @@ -1088,7 +1209,8 @@ struct drm_mode_config_helper_funcs { * After the atomic update is committed to the hardware this hook needs * to call drm_atomic_helper_commit_hw_done(). Then wait for the upate * to be executed by the hardware, for example using - * drm_atomic_helper_wait_for_vblanks(), and then clean up the old + * drm_atomic_helper_wait_for_vblanks() or + * drm_atomic_helper_wait_for_flip_done(), and then clean up the old * framebuffers using drm_atomic_helper_cleanup_planes(). * * When disabling a CRTC this hook _must_ stall for the commit to diff --git a/include/drm/drm_os_linux.h b/include/drm/drm_os_linux.h index 35e1482ba8a1..10122353b744 100644 --- a/include/drm/drm_os_linux.h +++ b/include/drm/drm_os_linux.h @@ -6,19 +6,7 @@ #include <linux/interrupt.h> /* For task queue support */ #include <linux/sched/signal.h> #include <linux/delay.h> - -#ifndef readq -static inline u64 readq(void __iomem *reg) -{ - return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32); -} - -static inline void writeq(u64 val, void __iomem *reg) -{ - writel(val & 0xffffffff, reg); - writel(val >> 32, reg + 0x4UL); -} -#endif +#include <linux/io-64-nonatomic-lo-hi.h> /** Current process ID */ #define DRM_CURRENTPID task_pid_nr(current) diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index 1b364b0100f4..14ac240a1f64 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -24,8 +24,10 @@ #ifndef __DRM_PANEL_H__ #define __DRM_PANEL_H__ +#include <linux/errno.h> #include <linux/list.h> +struct device_node; struct drm_connector; struct drm_device; struct drm_panel; diff --git a/include/drm/drm_pci.h b/include/drm/drm_pci.h index 4579fac1080c..674599025d7d 100644 --- a/include/drm/drm_pci.h +++ b/include/drm/drm_pci.h @@ -43,13 +43,12 @@ struct drm_dma_handle *drm_pci_alloc(struct drm_device *dev, size_t size, size_t align); void drm_pci_free(struct drm_device *dev, struct drm_dma_handle * dmah); -int drm_pci_init(struct drm_driver *driver, struct pci_driver *pdriver); -void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver); +int drm_legacy_pci_init(struct drm_driver *driver, struct pci_driver *pdriver); +void drm_legacy_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver); #ifdef CONFIG_PCI int drm_get_pci_dev(struct pci_dev *pdev, const struct pci_device_id *ent, struct drm_driver *driver); -int drm_pci_set_busid(struct drm_device *dev, struct drm_master *master); #else static inline int drm_get_pci_dev(struct pci_dev *pdev, const struct pci_device_id *ent, @@ -57,12 +56,6 @@ static inline int drm_get_pci_dev(struct pci_dev *pdev, { return -ENOSYS; } - -static inline int drm_pci_set_busid(struct drm_device *dev, - struct drm_master *master) -{ - return -ENOSYS; -} #endif #define DRM_PCIE_SPEED_25 1 diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index 9ab3e7044812..73f90f9d057f 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -233,11 +233,9 @@ struct drm_plane_funcs { * This is the legacy entry point to update a property attached to the * plane. * - * Drivers implementing atomic modeset should use - * drm_atomic_helper_plane_set_property() to implement this hook. - * * This callback is optional if the driver does not support any legacy - * driver-private properties. + * driver-private properties. For atomic drivers it is not used because + * property handling is done entirely in the DRM core. * * RETURNS: * @@ -392,6 +390,22 @@ struct drm_plane_funcs { */ void (*atomic_print_state)(struct drm_printer *p, const struct drm_plane_state *state); + + /** + * @format_mod_supported: + * + * This optional hook is used for the DRM to determine if the given + * format/modifier combination is valid for the plane. This allows the + * DRM to generate the correct format bitmask (which formats apply to + * which modifier). + * + * Returns: + * + * True if the given modifier is valid for that format on the plane. + * False otherwise. + */ + bool (*format_mod_supported)(struct drm_plane *plane, uint32_t format, + uint64_t modifier); }; /** @@ -487,6 +501,9 @@ struct drm_plane { unsigned int format_count; bool format_default; + uint64_t *modifiers; + unsigned int modifier_count; + struct drm_crtc *crtc; struct drm_framebuffer *fb; @@ -527,13 +544,14 @@ struct drm_plane { #define obj_to_plane(x) container_of(x, struct drm_plane, base) -__printf(8, 9) +__printf(9, 10) int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, uint32_t possible_crtcs, const struct drm_plane_funcs *funcs, const uint32_t *formats, unsigned int format_count, + const uint64_t *format_modifiers, enum drm_plane_type type, const char *name, ...); int drm_plane_init(struct drm_device *dev, diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index 0b2a235c4be0..9cd9e36f77b5 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -50,6 +50,8 @@ struct drm_prime_file_private { struct rb_root handles; }; +struct device; + struct dma_buf_export_info; struct dma_buf; @@ -57,6 +59,8 @@ struct drm_device; struct drm_gem_object; struct drm_file; +struct device; + struct dma_buf *drm_gem_prime_export(struct drm_device *dev, struct drm_gem_object *obj, int flags); @@ -65,6 +69,11 @@ int drm_gem_prime_handle_to_fd(struct drm_device *dev, int *prime_fd); struct drm_gem_object *drm_gem_prime_import(struct drm_device *dev, struct dma_buf *dma_buf); + +struct drm_gem_object *drm_gem_prime_import_dev(struct drm_device *dev, + struct dma_buf *dma_buf, + struct device *attach_dev); + int drm_gem_prime_fd_to_handle(struct drm_device *dev, struct drm_file *file_priv, int prime_fd, uint32_t *handle); struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h index 13e8c17d1c79..37355c623e6c 100644 --- a/include/drm/drm_property.h +++ b/include/drm/drm_property.h @@ -214,7 +214,7 @@ struct drm_property_blob { struct drm_prop_enum_list { int type; - char *name; + const char *name; }; #define obj_to_property(x) container_of(x, struct drm_property, base) @@ -273,6 +273,8 @@ int drm_property_replace_global_blob(struct drm_device *dev, const void *data, struct drm_mode_object *obj_holds_id, struct drm_property *prop_holds_id); +bool drm_property_replace_blob(struct drm_property_blob **blob, + struct drm_property_blob *new_blob); struct drm_property_blob *drm_property_blob_get(struct drm_property_blob *blob); void drm_property_blob_put(struct drm_property_blob *blob); diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h index 83bb156d4356..44bc122b9ee0 100644 --- a/include/drm/drm_rect.h +++ b/include/drm/drm_rect.h @@ -43,6 +43,33 @@ struct drm_rect { }; /** + * DRM_RECT_FMT - printf string for &struct drm_rect + */ +#define DRM_RECT_FMT "%dx%d%+d%+d" +/** + * DRM_RECT_ARG - printf arguments for &struct drm_rect + * @r: rectangle struct + */ +#define DRM_RECT_ARG(r) drm_rect_width(r), drm_rect_height(r), (r)->x1, (r)->y1 + +/** + * DRM_RECT_FP_FMT - printf string for &struct drm_rect in 16.16 fixed point + */ +#define DRM_RECT_FP_FMT "%d.%06ux%d.%06u%+d.%06u%+d.%06u" +/** + * DRM_RECT_FP_ARG - printf arguments for &struct drm_rect in 16.16 fixed point + * @r: rectangle struct + * + * This is useful for e.g. printing plane source rectangles, which are in 16.16 + * fixed point. + */ +#define DRM_RECT_FP_ARG(r) \ + drm_rect_width(r) >> 16, ((drm_rect_width(r) & 0xffff) * 15625) >> 10, \ + drm_rect_height(r) >> 16, ((drm_rect_height(r) & 0xffff) * 15625) >> 10, \ + (r)->x1 >> 16, (((r)->x1 & 0xffff) * 15625) >> 10, \ + (r)->y1 >> 16, (((r)->y1 & 0xffff) * 15625) >> 10 + +/** * drm_rect_adjust_size - adjust the size of the rectangle * @r: rectangle to be adjusted * @dw: horizontal adjustment diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h index c25122bb490a..f92eb2094d6b 100644 --- a/include/drm/drm_scdc_helper.h +++ b/include/drm/drm_scdc_helper.h @@ -131,31 +131,6 @@ static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset, bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter); -/** - * drm_scdc_set_scrambling - enable scrambling - * @adapter: I2C adapter for DDC channel - * @enable: bool to indicate if scrambling is to be enabled/disabled - * - * Writes the TMDS config register over SCDC channel, and: - * enables scrambling when enable = 1 - * disables scrambling when enable = 0 - * - * Returns: - * True if scrambling is set/reset successfully, false otherwise. - */ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable); - -/** - * drm_scdc_set_high_tmds_clock_ratio - set TMDS clock ratio - * @adapter: I2C adapter for DDC channel - * @set: ret or reset the high clock ratio - * - * Writes to the TMDS config register over SCDC channel, and: - * sets TMDS clock ratio to 1/40 when set = 1 - * sets TMDS clock ratio to 1/10 when set = 0 - * - * Returns: - * True if write is successful, false otherwise. - */ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set); #endif diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h index 2d36538e4a17..6d9adbb46293 100644 --- a/include/drm/drm_simple_kms_helper.h +++ b/include/drm/drm_simple_kms_helper.h @@ -122,6 +122,7 @@ int drm_simple_display_pipe_init(struct drm_device *dev, struct drm_simple_display_pipe *pipe, const struct drm_simple_display_pipe_funcs *funcs, const uint32_t *formats, unsigned int format_count, + const uint64_t *format_modifiers, struct drm_connector *connector); #endif /* __LINUX_DRM_SIMPLE_KMS_HELPER_H */ diff --git a/include/drm/drm_syncobj.h b/include/drm/drm_syncobj.h new file mode 100644 index 000000000000..c00fee539822 --- /dev/null +++ b/include/drm/drm_syncobj.h @@ -0,0 +1,140 @@ +/* + * Copyright © 2017 Red Hat + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * + */ +#ifndef __DRM_SYNCOBJ_H__ +#define __DRM_SYNCOBJ_H__ + +#include "linux/dma-fence.h" + +struct drm_syncobj_cb; + +/** + * struct drm_syncobj - sync object. + * + * This structure defines a generic sync object which wraps a dma fence. + */ +struct drm_syncobj { + /** + * @refcount: + * + * Reference count of this object. + */ + struct kref refcount; + /** + * @fence: + * NULL or a pointer to the fence bound to this object. + * + * This field should not be used directly. Use drm_syncobj_fence_get + * and drm_syncobj_replace_fence instead. + */ + struct dma_fence *fence; + /** + * @cb_list: + * List of callbacks to call when the fence gets replaced + */ + struct list_head cb_list; + /** + * @lock: + * locks cb_list and write-locks fence. + */ + spinlock_t lock; + /** + * @file: + * a file backing for this syncobj. + */ + struct file *file; +}; + +typedef void (*drm_syncobj_func_t)(struct drm_syncobj *syncobj, + struct drm_syncobj_cb *cb); + +/** + * struct drm_syncobj_cb - callback for drm_syncobj_add_callback + * @node: used by drm_syncob_add_callback to append this struct to + * syncobj::cb_list + * @func: drm_syncobj_func_t to call + * + * This struct will be initialized by drm_syncobj_add_callback, additional + * data can be passed along by embedding drm_syncobj_cb in another struct. + * The callback will get called the next time drm_syncobj_replace_fence is + * called. + */ +struct drm_syncobj_cb { + struct list_head node; + drm_syncobj_func_t func; +}; + +void drm_syncobj_free(struct kref *kref); + +/** + * drm_syncobj_get - acquire a syncobj reference + * @obj: sync object + * + * This acquires additional reference to @obj. It is illegal to call this + * without already holding a reference. No locks required. + */ +static inline void +drm_syncobj_get(struct drm_syncobj *obj) +{ + kref_get(&obj->refcount); +} + +/** + * drm_syncobj_put - release a reference to a sync object. + * @obj: sync object. + */ +static inline void +drm_syncobj_put(struct drm_syncobj *obj) +{ + kref_put(&obj->refcount, drm_syncobj_free); +} + +static inline struct dma_fence * +drm_syncobj_fence_get(struct drm_syncobj *syncobj) +{ + struct dma_fence *fence; + + rcu_read_lock(); + fence = dma_fence_get_rcu_safe(&syncobj->fence); + rcu_read_unlock(); + + return fence; +} + +struct drm_syncobj *drm_syncobj_find(struct drm_file *file_private, + u32 handle); +void drm_syncobj_add_callback(struct drm_syncobj *syncobj, + struct drm_syncobj_cb *cb, + drm_syncobj_func_t func); +void drm_syncobj_remove_callback(struct drm_syncobj *syncobj, + struct drm_syncobj_cb *cb); +void drm_syncobj_replace_fence(struct drm_syncobj *syncobj, + struct dma_fence *fence); +int drm_syncobj_find_fence(struct drm_file *file_private, + u32 handle, + struct dma_fence **fence); +void drm_syncobj_free(struct kref *kref); + +#endif diff --git a/include/drm/drm_vblank.h b/include/drm/drm_vblank.h new file mode 100644 index 000000000000..7fba9efe4951 --- /dev/null +++ b/include/drm/drm_vblank.h @@ -0,0 +1,180 @@ +/* + * Copyright 2016 Intel Corp. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DRM_VBLANK_H_ +#define _DRM_VBLANK_H_ + +#include <linux/seqlock.h> +#include <linux/idr.h> +#include <linux/poll.h> + +#include <drm/drm_file.h> +#include <drm/drm_modes.h> +#include <uapi/drm/drm.h> + +struct drm_device; +struct drm_crtc; + +/** + * struct drm_pending_vblank_event - pending vblank event tracking + */ +struct drm_pending_vblank_event { + /** + * @base: Base structure for tracking pending DRM events. + */ + struct drm_pending_event base; + /** + * @pipe: drm_crtc_index() of the &drm_crtc this event is for. + */ + unsigned int pipe; + /** + * @event: Actual event which will be sent to userspace. + */ + struct drm_event_vblank event; +}; + +/** + * struct drm_vblank_crtc - vblank tracking for a CRTC + * + * This structure tracks the vblank state for one CRTC. + * + * Note that for historical reasons - the vblank handling code is still shared + * with legacy/non-kms drivers - this is a free-standing structure not directly + * connected to &struct drm_crtc. But all public interface functions are taking + * a &struct drm_crtc to hide this implementation detail. + */ +struct drm_vblank_crtc { + /** + * @dev: Pointer to the &drm_device. + */ + struct drm_device *dev; + /** + * @queue: Wait queue for vblank waiters. + */ + wait_queue_head_t queue; /**< VBLANK wait queue */ + /** + * @disable_timer: Disable timer for the delayed vblank disabling + * hysteresis logic. Vblank disabling is controlled through the + * drm_vblank_offdelay module option and the setting of the + * &drm_device.max_vblank_count value. + */ + struct timer_list disable_timer; + + /** + * @seqlock: Protect vblank count and time. + */ + seqlock_t seqlock; /* protects vblank count and time */ + + /** + * @count: Current software vblank counter. + */ + u32 count; + /** + * @time: Vblank timestamp corresponding to @count. + */ + struct timeval time; + + /** + * @refcount: Number of users/waiters of the vblank interrupt. Only when + * this refcount reaches 0 can the hardware interrupt be disabled using + * @disable_timer. + */ + atomic_t refcount; /* number of users of vblank interruptsper crtc */ + /** + * @last: Protected by &drm_device.vbl_lock, used for wraparound handling. + */ + u32 last; + /** + * @inmodeset: Tracks whether the vblank is disabled due to a modeset. + * For legacy driver bit 2 additionally tracks whether an additional + * temporary vblank reference has been acquired to paper over the + * hardware counter resetting/jumping. KMS drivers should instead just + * call drm_crtc_vblank_off() and drm_crtc_vblank_on(), which explicitly + * save and restore the vblank count. + */ + unsigned int inmodeset; /* Display driver is setting mode */ + /** + * @pipe: drm_crtc_index() of the &drm_crtc corresponding to this + * structure. + */ + unsigned int pipe; + /** + * @framedur_ns: Frame/Field duration in ns, used by + * drm_calc_vbltimestamp_from_scanoutpos() and computed by + * drm_calc_timestamping_constants(). + */ + int framedur_ns; + /** + * @linedur_ns: Line duration in ns, used by + * drm_calc_vbltimestamp_from_scanoutpos() and computed by + * drm_calc_timestamping_constants(). + */ + int linedur_ns; + + /** + * @hwmode: + * + * Cache of the current hardware display mode. Only valid when @enabled + * is set. This is used by helpers like + * drm_calc_vbltimestamp_from_scanoutpos(). We can't just access the + * hardware mode by e.g. looking at &drm_crtc_state.adjusted_mode, + * because that one is really hard to get from interrupt context. + */ + struct drm_display_mode hwmode; + + /** + * @enabled: Tracks the enabling state of the corresponding &drm_crtc to + * avoid double-disabling and hence corrupting saved state. Needed by + * drivers not using atomic KMS, since those might go through their CRTC + * disabling functions multiple times. + */ + bool enabled; +}; + +int drm_vblank_init(struct drm_device *dev, unsigned int num_crtcs); +u32 drm_crtc_vblank_count(struct drm_crtc *crtc); +u32 drm_crtc_vblank_count_and_time(struct drm_crtc *crtc, + struct timeval *vblanktime); +void drm_crtc_send_vblank_event(struct drm_crtc *crtc, + struct drm_pending_vblank_event *e); +void drm_crtc_arm_vblank_event(struct drm_crtc *crtc, + struct drm_pending_vblank_event *e); +bool drm_handle_vblank(struct drm_device *dev, unsigned int pipe); +bool drm_crtc_handle_vblank(struct drm_crtc *crtc); +int drm_crtc_vblank_get(struct drm_crtc *crtc); +void drm_crtc_vblank_put(struct drm_crtc *crtc); +void drm_wait_one_vblank(struct drm_device *dev, unsigned int pipe); +void drm_crtc_wait_one_vblank(struct drm_crtc *crtc); +void drm_crtc_vblank_off(struct drm_crtc *crtc); +void drm_crtc_vblank_reset(struct drm_crtc *crtc); +void drm_crtc_vblank_on(struct drm_crtc *crtc); +u32 drm_crtc_accurate_vblank_count(struct drm_crtc *crtc); + +bool drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, + unsigned int pipe, int *max_error, + struct timeval *vblank_time, + bool in_vblank_irq); +void drm_calc_timestamping_constants(struct drm_crtc *crtc, + const struct drm_display_mode *mode); +wait_queue_head_t *drm_crtc_vblank_waitqueue(struct drm_crtc *crtc); +#endif diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 27e0dbaa6c0e..34c8f5600ce0 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -334,4 +334,44 @@ INTEL_KBL_GT3_IDS(info), \ INTEL_KBL_GT4_IDS(info) +/* CFL S */ +#define INTEL_CFL_S_IDS(info) \ + INTEL_VGA_DEVICE(0x3E90, info), /* SRV GT1 */ \ + INTEL_VGA_DEVICE(0x3E93, info), /* SRV GT1 */ \ + INTEL_VGA_DEVICE(0x3E91, info), /* SRV GT2 */ \ + INTEL_VGA_DEVICE(0x3E92, info), /* SRV GT2 */ \ + INTEL_VGA_DEVICE(0x3E96, info) /* SRV GT2 */ + +/* CFL H */ +#define INTEL_CFL_H_IDS(info) \ + INTEL_VGA_DEVICE(0x3E9B, info), /* Halo GT2 */ \ + INTEL_VGA_DEVICE(0x3E94, info) /* Halo GT2 */ + +/* CFL U */ +#define INTEL_CFL_U_IDS(info) \ + INTEL_VGA_DEVICE(0x3EA6, info), /* ULT GT3 */ \ + INTEL_VGA_DEVICE(0x3EA7, info), /* ULT GT3 */ \ + INTEL_VGA_DEVICE(0x3EA8, info), /* ULT GT3 */ \ + INTEL_VGA_DEVICE(0x3EA5, info) /* ULT GT3 */ + +/* CNL U 2+2 */ +#define INTEL_CNL_U_GT2_IDS(info) \ + INTEL_VGA_DEVICE(0x5A52, info), \ + INTEL_VGA_DEVICE(0x5A5A, info), \ + INTEL_VGA_DEVICE(0x5A42, info), \ + INTEL_VGA_DEVICE(0x5A4A, info) + +/* CNL Y 2+2 */ +#define INTEL_CNL_Y_GT2_IDS(info) \ + INTEL_VGA_DEVICE(0x5A51, info), \ + INTEL_VGA_DEVICE(0x5A59, info), \ + INTEL_VGA_DEVICE(0x5A41, info), \ + INTEL_VGA_DEVICE(0x5A49, info), \ + INTEL_VGA_DEVICE(0x5A71, info), \ + INTEL_VGA_DEVICE(0x5A79, info) + +#define INTEL_CNL_IDS(info) \ + INTEL_CNL_U_GT2_IDS(info), \ + INTEL_CNL_Y_GT2_IDS(info) + #endif /* _I915_PCIIDS_H */ diff --git a/include/drm/intel_lpe_audio.h b/include/drm/intel_lpe_audio.h index e9892b4c3af1..b6121c8fe539 100644 --- a/include/drm/intel_lpe_audio.h +++ b/include/drm/intel_lpe_audio.h @@ -31,20 +31,20 @@ struct platform_device; #define HDMI_MAX_ELD_BYTES 128 -struct intel_hdmi_lpe_audio_eld { - int port_id; - int pipe_id; - unsigned char eld_data[HDMI_MAX_ELD_BYTES]; +struct intel_hdmi_lpe_audio_port_pdata { + u8 eld[HDMI_MAX_ELD_BYTES]; + int port; + int pipe; + int ls_clock; + bool dp_output; }; struct intel_hdmi_lpe_audio_pdata { - bool notify_pending; - int tmds_clock_speed; - bool hdmi_connected; - bool dp_output; - int link_rate; - struct intel_hdmi_lpe_audio_eld eld; - void (*notify_audio_lpe)(struct platform_device *pdev); + struct intel_hdmi_lpe_audio_port_pdata port[3]; /* for ports B,C,D */ + int num_ports; + int num_pipes; + + void (*notify_audio_lpe)(struct platform_device *pdev, int port); /* port: 0==B,1==C,2==D */ spinlock_t lpe_audio_slock; }; diff --git a/include/drm/tinydrm/mipi-dbi.h b/include/drm/tinydrm/mipi-dbi.h index d137b16ee873..83346ddb9dba 100644 --- a/include/drm/tinydrm/mipi-dbi.h +++ b/include/drm/tinydrm/mipi-dbi.h @@ -62,11 +62,7 @@ mipi_dbi_from_tinydrm(struct tinydrm_device *tdev) } int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi, - struct gpio_desc *dc, - const struct drm_simple_display_pipe_funcs *pipe_funcs, - struct drm_driver *driver, - const struct drm_display_mode *mode, - unsigned int rotation); + struct gpio_desc *dc); int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi, const struct drm_simple_display_pipe_funcs *pipe_funcs, struct drm_driver *driver, diff --git a/include/drm/tinydrm/tinydrm-helpers.h b/include/drm/tinydrm/tinydrm-helpers.h index 9b9b6cfe3ba5..d554ded60ee9 100644 --- a/include/drm/tinydrm/tinydrm-helpers.h +++ b/include/drm/tinydrm/tinydrm-helpers.h @@ -43,6 +43,8 @@ void tinydrm_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb, void tinydrm_xrgb8888_to_rgb565(u16 *dst, void *vaddr, struct drm_framebuffer *fb, struct drm_clip_rect *clip, bool swap); +void tinydrm_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb, + struct drm_clip_rect *clip); struct backlight_device *tinydrm_of_find_backlight(struct device *dev); int tinydrm_enable_backlight(struct backlight_device *backlight); diff --git a/include/drm/tinydrm/tinydrm.h b/include/drm/tinydrm/tinydrm.h index 00b800df4d1b..4774fe3d4273 100644 --- a/include/drm/tinydrm/tinydrm.h +++ b/include/drm/tinydrm/tinydrm.h @@ -56,9 +56,7 @@ pipe_to_tinydrm(struct drm_simple_display_pipe *pipe) .gem_prime_vmap = drm_gem_cma_prime_vmap, \ .gem_prime_vunmap = drm_gem_cma_prime_vunmap, \ .gem_prime_mmap = drm_gem_cma_prime_mmap, \ - .dumb_create = drm_gem_cma_dumb_create, \ - .dumb_map_offset = drm_gem_cma_dumb_map_offset, \ - .dumb_destroy = drm_gem_dumb_destroy + .dumb_create = drm_gem_cma_dumb_create /** * TINYDRM_MODE - tinydrm display mode diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h index 6bbd34d25a8d..5f821a9b3a1f 100644 --- a/include/drm/ttm/ttm_bo_driver.h +++ b/include/drm/ttm/ttm_bo_driver.h @@ -30,10 +30,6 @@ #ifndef _TTM_BO_DRIVER_H_ #define _TTM_BO_DRIVER_H_ -#include <ttm/ttm_bo_api.h> -#include <ttm/ttm_memory.h> -#include <ttm/ttm_module.h> -#include <ttm/ttm_placement.h> #include <drm/drm_mm.h> #include <drm/drm_global.h> #include <drm/drm_vma_manager.h> @@ -42,6 +38,11 @@ #include <linux/spinlock.h> #include <linux/reservation.h> +#include "ttm_bo_api.h" +#include "ttm_memory.h" +#include "ttm_module.h" +#include "ttm_placement.h" + #define TTM_MAX_BO_PRIORITY 4U struct ttm_backend_func { @@ -228,13 +229,14 @@ struct ttm_mem_type_manager_func { * struct ttm_mem_type_manager member debug * * @man: Pointer to a memory type manager. - * @prefix: Prefix to be used in printout to identify the caller. + * @printer: Prefix to be used in printout to identify the caller. * * This function is called to print out the state of the memory * type manager to aid debugging of out-of-memory conditions. * It may not be called from within atomic context. */ - void (*debug)(struct ttm_mem_type_manager *man, const char *prefix); + void (*debug)(struct ttm_mem_type_manager *man, + struct drm_printer *printer); }; /** @@ -471,6 +473,23 @@ struct ttm_bo_driver { */ unsigned long (*io_mem_pfn)(struct ttm_buffer_object *bo, unsigned long page_offset); + + /** + * Read/write memory buffers for ptrace access + * + * @bo: the BO to access + * @offset: the offset from the start of the BO + * @buf: pointer to source/destination buffer + * @len: number of bytes to copy + * @write: whether to read (0) from or write (non-0) to BO + * + * If successful, this function should return the number of + * bytes copied, -EIO otherwise. If the number of bytes + * returned is < len, the function may be called again with + * the remainder of the buffer to copy. + */ + int (*access_memory)(struct ttm_buffer_object *bo, unsigned long offset, + void *buf, int len, int write); }; /** diff --git a/include/drm/ttm/ttm_execbuf_util.h b/include/drm/ttm/ttm_execbuf_util.h index 47f35b8e6d09..b0fdd1980034 100644 --- a/include/drm/ttm/ttm_execbuf_util.h +++ b/include/drm/ttm/ttm_execbuf_util.h @@ -31,9 +31,10 @@ #ifndef _TTM_EXECBUF_UTIL_H_ #define _TTM_EXECBUF_UTIL_H_ -#include <ttm/ttm_bo_api.h> #include <linux/list.h> +#include "ttm_bo_api.h" + /** * struct ttm_validate_buffer * diff --git a/include/drm/ttm/ttm_lock.h b/include/drm/ttm/ttm_lock.h index 2902beb5f689..0c3af9836863 100644 --- a/include/drm/ttm/ttm_lock.h +++ b/include/drm/ttm/ttm_lock.h @@ -49,10 +49,11 @@ #ifndef _TTM_LOCK_H_ #define _TTM_LOCK_H_ -#include <ttm/ttm_object.h> #include <linux/wait.h> #include <linux/atomic.h> +#include "ttm_object.h" + /** * struct ttm_lock * diff --git a/include/drm/ttm/ttm_object.h b/include/drm/ttm/ttm_object.h index 1487011fe057..a98bfeb4239e 100644 --- a/include/drm/ttm/ttm_object.h +++ b/include/drm/ttm/ttm_object.h @@ -42,7 +42,8 @@ #include <linux/kref.h> #include <linux/rcupdate.h> #include <linux/dma-buf.h> -#include <ttm/ttm_memory.h> + +#include "ttm_memory.h" /** * enum ttm_ref_type |
