summaryrefslogtreecommitdiffstats
path: root/include/asm-sparc64/hypervisor.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc64/hypervisor.h')
-rw-r--r--include/asm-sparc64/hypervisor.h2946
1 files changed, 1 insertions, 2945 deletions
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
index 3ad45dff52f8..fe7e51a9e429 100644
--- a/include/asm-sparc64/hypervisor.h
+++ b/include/asm-sparc64/hypervisor.h
@@ -1,2945 +1 @@
-#ifndef _SPARC64_HYPERVISOR_H
-#define _SPARC64_HYPERVISOR_H
-
-/* Sun4v hypervisor interfaces and defines.
- *
- * Hypervisor calls are made via traps to software traps number 0x80
- * and above. Registers %o0 to %o5 serve as argument, status, and
- * return value registers.
- *
- * There are two kinds of these traps. First there are the normal
- * "fast traps" which use software trap 0x80 and encode the function
- * to invoke by number in register %o5. Argument and return value
- * handling is as follows:
- *
- * -----------------------------------------------
- * | %o5 | function number | undefined |
- * | %o0 | argument 0 | return status |
- * | %o1 | argument 1 | return value 1 |
- * | %o2 | argument 2 | return value 2 |
- * | %o3 | argument 3 | return value 3 |
- * | %o4 | argument 4 | return value 4 |
- * -----------------------------------------------
- *
- * The second type are "hyper-fast traps" which encode the function
- * number in the software trap number itself. So these use trap
- * numbers > 0x80. The register usage for hyper-fast traps is as
- * follows:
- *
- * -----------------------------------------------
- * | %o0 | argument 0 | return status |
- * | %o1 | argument 1 | return value 1 |
- * | %o2 | argument 2 | return value 2 |
- * | %o3 | argument 3 | return value 3 |
- * | %o4 | argument 4 | return value 4 |
- * -----------------------------------------------
- *
- * Registers providing explicit arguments to the hypervisor calls
- * are volatile across the call. Upon return their values are
- * undefined unless explicitly specified as containing a particular
- * return value by the specific call. The return status is always
- * returned in register %o0, zero indicates a successful execution of
- * the hypervisor call and other values indicate an error status as
- * defined below. So, for example, if a hyper-fast trap takes
- * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
- * the call and %o3, %o4, and %o5 would be preserved.
- *
- * If the hypervisor trap is invalid, or the fast trap function number
- * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits
- * of the argument and return values are significant.
- */
-
-/* Trap numbers. */
-#define HV_FAST_TRAP 0x80
-#define HV_MMU_MAP_ADDR_TRAP 0x83
-#define HV_MMU_UNMAP_ADDR_TRAP 0x84
-#define HV_TTRACE_ADDENTRY_TRAP 0x85
-#define HV_CORE_TRAP 0xff
-
-/* Error codes. */
-#define HV_EOK 0 /* Successful return */
-#define HV_ENOCPU 1 /* Invalid CPU id */
-#define HV_ENORADDR 2 /* Invalid real address */
-#define HV_ENOINTR 3 /* Invalid interrupt id */
-#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */
-#define HV_EBADTSB 5 /* Invalid TSB description */
-#define HV_EINVAL 6 /* Invalid argument */
-#define HV_EBADTRAP 7 /* Invalid function number */
-#define HV_EBADALIGN 8 /* Invalid address alignment */
-#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */
-#define HV_ENOACCESS 10 /* No access to resource */
-#define HV_EIO 11 /* I/O error */
-#define HV_ECPUERROR 12 /* CPU in error state */
-#define HV_ENOTSUPPORTED 13 /* Function not supported */
-#define HV_ENOMAP 14 /* No mapping found */
-#define HV_ETOOMANY 15 /* Too many items specified */
-#define HV_ECHANNEL 16 /* Invalid LDC channel */
-#define HV_EBUSY 17 /* Resource busy */
-
-/* mach_exit()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_EXIT
- * ARG0: exit code
- * ERRORS: This service does not return.
- *
- * Stop all CPUs in the virtual domain and place them into the stopped
- * state. The 64-bit exit code may be passed to a service entity as
- * the domain's exit status. On systems without a service entity, the
- * domain will undergo a reset, and the boot firmware will be
- * reloaded.
- *
- * This function will never return to the guest that invokes it.
- *
- * Note: By convention an exit code of zero denotes a successful exit by
- * the guest code. A non-zero exit code denotes a guest specific
- * error indication.
- *
- */
-#define HV_FAST_MACH_EXIT 0x00
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mach_exit(unsigned long exit_code);
-#endif
-
-/* Domain services. */
-
-/* mach_desc()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_DESC
- * ARG0: buffer
- * ARG1: length
- * RET0: status
- * RET1: length
- * ERRORS: HV_EBADALIGN Buffer is badly aligned
- * HV_ENORADDR Buffer is to an illegal real address.
- * HV_EINVAL Buffer length is too small for complete
- * machine description.
- *
- * Copy the most current machine description into the buffer indicated
- * by the real address in ARG0. The buffer provided must be 16 byte
- * aligned. Upon success or HV_EINVAL, this service returns the
- * actual size of the machine description in the RET1 return value.
- *
- * Note: A method of determining the appropriate buffer size for the
- * machine description is to first call this service with a buffer
- * length of 0 bytes.
- */
-#define HV_FAST_MACH_DESC 0x01
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
- unsigned long buf_len,
- unsigned long *real_buf_len);
-#endif
-
-/* mach_sir()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_SIR
- * ERRORS: This service does not return.
- *
- * Perform a software initiated reset of the virtual machine domain.
- * All CPUs are captured as soon as possible, all hardware devices are
- * returned to the entry default state, and the domain is restarted at
- * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
- * of the CPUs. The single CPU restarted is selected as determined by
- * platform specific policy. Memory is preserved across this
- * operation.
- */
-#define HV_FAST_MACH_SIR 0x02
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mach_sir(void);
-#endif
-
-/* mach_set_watchdog()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_SET_WATCHDOG
- * ARG0: timeout in milliseconds
- * RET0: status
- * RET1: time remaining in milliseconds
- *
- * A guest uses this API to set a watchdog timer. Once the gues has set
- * the timer, it must call the timer service again either to disable or
- * postpone the expiration. If the timer expires before being reset or
- * disabled, then the hypervisor take a platform specific action leading
- * to guest termination within a bounded time period. The platform action
- * may include recovery actions such as reporting the expiration to a
- * Service Processor, and/or automatically restarting the gues.
- *
- * The 'timeout' parameter is specified in milliseconds, however the
- * implementated granularity is given by the 'watchdog-resolution'
- * property in the 'platform' node of the guest's machine description.
- * The largest allowed timeout value is specified by the
- * 'watchdog-max-timeout' property of the 'platform' node.
- *
- * If the 'timeout' argument is not zero, the watchdog timer is set to
- * expire after a minimum of 'timeout' milliseconds.
- *
- * If the 'timeout' argument is zero, the watchdog timer is disabled.
- *
- * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
- * property, the hypervisor leaves the watchdog timer state unchanged,
- * and returns a status of EINVAL.
- *
- * The 'time remaining' return value is valid regardless of whether the
- * return status is EOK or EINVAL. A non-zero return value indicates the
- * number of milliseconds that were remaining until the timer was to expire.
- * If less than one millisecond remains, the return value is '1'. If the
- * watchdog timer was disabled at the time of the call, the return value is
- * zero.
- *
- * If the hypervisor cannot support the exact timeout value requested, but
- * can support a larger timeout value, the hypervisor may round the actual
- * timeout to a value larger than the requested timeout, consequently the
- * 'time remaining' return value may be larger than the previously requested
- * timeout value.
- *
- * Any guest OS debugger should be aware that the watchdog service may be in
- * use. Consequently, it is recommended that the watchdog service is
- * disabled upon debugger entry (e.g. reaching a breakpoint), and then
- * re-enabled upon returning to normal execution. The API has been designed
- * with this in mind, and the 'time remaining' result of the disable call may
- * be used directly as the timeout argument of the re-enable call.
- */
-#define HV_FAST_MACH_SET_WATCHDOG 0x05
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
- unsigned long *orig_timeout);
-#endif
-
-/* CPU services.
- *
- * CPUs represent devices that can execute software threads. A single
- * chip that contains multiple cores or strands is represented as
- * multiple CPUs with unique CPU identifiers. CPUs are exported to
- * OBP via the machine description (and to the OS via the OBP device
- * tree). CPUs are always in one of three states: stopped, running,
- * or error.
- *
- * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
- * CPU within a logical domain. Operations that are to be performed
- * on multiple CPUs specify them via a CPU list. A CPU list is an
- * array in real memory, of which each 16-bit word is a CPU ID. CPU
- * lists are passed through the API as two arguments. The first is
- * the number of entries (16-bit words) in the CPU list, and the
- * second is the (real address) pointer to the CPU ID list.
- */
-
-/* cpu_start()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_START
- * ARG0: CPU ID
- * ARG1: PC
- * ARG2: RTBA
- * ARG3: target ARG0
- * RET0: status
- * ERRORS: ENOCPU Invalid CPU ID
- * EINVAL Target CPU ID is not in the stopped state
- * ENORADDR Invalid PC or RTBA real address
- * EBADALIGN Unaligned PC or unaligned RTBA
- * EWOULDBLOCK Starting resources are not available
- *
- * Start CPU with given CPU ID with PC in %pc and with a real trap
- * base address value of RTBA. The indicated CPU must be in the
- * stopped state. The supplied RTBA must be aligned on a 256 byte
- * boundary. On successful completion, the specified CPU will be in
- * the running state and will be supplied with "target ARG0" in %o0
- * and RTBA in %tba.
- */
-#define HV_FAST_CPU_START 0x10
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_start(unsigned long cpuid,
- unsigned long pc,
- unsigned long rtba,
- unsigned long arg0);
-#endif
-
-/* cpu_stop()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_STOP
- * ARG0: CPU ID
- * RET0: status
- * ERRORS: ENOCPU Invalid CPU ID
- * EINVAL Target CPU ID is the current cpu
- * EINVAL Target CPU ID is not in the running state
- * EWOULDBLOCK Stopping resources are not available
- * ENOTSUPPORTED Not supported on this platform
- *
- * The specified CPU is stopped. The indicated CPU must be in the
- * running state. On completion, it will be in the stopped state. It
- * is not legal to stop the current CPU.
- *
- * Note: As this service cannot be used to stop the current cpu, this service
- * may not be used to stop the last running CPU in a domain. To stop
- * and exit a running domain, a guest must use the mach_exit() service.
- */
-#define HV_FAST_CPU_STOP 0x11
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
-#endif
-
-/* cpu_yield()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_YIELD
- * RET0: status
- * ERRORS: No possible error.
- *
- * Suspend execution on the current CPU. Execution will resume when
- * an interrupt (device, %stick_compare, or cross-call) is targeted to
- * the CPU. On some CPUs, this API may be used by the hypervisor to
- * save power by disabling hardware strands.
- */
-#define HV_FAST_CPU_YIELD 0x12
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_yield(void);
-#endif
-
-/* cpu_qconf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_QCONF
- * ARG0: queue
- * ARG1: base real address
- * ARG2: number of entries
- * RET0: status
- * ERRORS: ENORADDR Invalid base real address
- * EINVAL Invalid queue or number of entries is less
- * than 2 or too large.
- * EBADALIGN Base real address is not correctly aligned
- * for size.
- *
- * Configure the given queue to be placed at the given base real
- * address, with the given number of entries. The number of entries
- * must be a power of 2. The base real address must be aligned
- * exactly to match the queue size. Each queue entry is 64 bytes
- * long, so for example a 32 entry queue must be aligned on a 2048
- * byte real address boundary.
- *
- * The specified queue is unconfigured if the number of entries is given
- * as zero.
- *
- * For the current version of this API service, the argument queue is defined
- * as follows:
- *
- * queue description
- * ----- -------------------------
- * 0x3c cpu mondo queue
- * 0x3d device mondo queue
- * 0x3e resumable error queue
- * 0x3f non-resumable error queue
- *
- * Note: The maximum number of entries for each queue for a specific cpu may
- * be determined from the machine description.
- */
-#define HV_FAST_CPU_QCONF 0x14
-#define HV_CPU_QUEUE_CPU_MONDO 0x3c
-#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d
-#define HV_CPU_QUEUE_RES_ERROR 0x3e
-#define HV_CPU_QUEUE_NONRES_ERROR 0x3f
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_qconf(unsigned long type,
- unsigned long queue_paddr,
- unsigned long num_queue_entries);
-#endif
-
-/* cpu_qinfo()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_QINFO
- * ARG0: queue
- * RET0: status
- * RET1: base real address
- * RET1: number of entries
- * ERRORS: EINVAL Invalid queue
- *
- * Return the configuration info for the given queue. The base real
- * address and number of entries of the defined queue are returned.
- * The queue argument values are the same as for cpu_qconf() above.
- *
- * If the specified queue is a valid queue number, but no queue has
- * been defined, the number of entries will be set to zero and the
- * base real address returned is undefined.
- */
-#define HV_FAST_CPU_QINFO 0x15
-
-/* cpu_mondo_send()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_MONDO_SEND
- * ARG0-1: CPU list
- * ARG2: data real address
- * RET0: status
- * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list
- * is not 2-byte aligned.
- * ENORADDR Invalid data mondo address, or invalid cpu list
- * address.
- * ENOCPU Invalid cpu in CPU list
- * EWOULDBLOCK Some or all of the listed CPUs did not receive
- * the mondo
- * ECPUERROR One or more of the listed CPUs are in error
- * state, use HV_FAST_CPU_STATE to see which ones
- * EINVAL CPU list includes caller's CPU ID
- *
- * Send a mondo interrupt to the CPUs in the given CPU list with the
- * 64-bytes at the given data real address. The data must be 64-byte
- * aligned. The mondo data will be delivered to the cpu_mondo queues
- * of the recipient CPUs.
- *
- * In all cases, error or not, the CPUs in the CPU list to which the
- * mondo has been successfully delivered will be indicated by having
- * their entry in CPU list updated with the value 0xffff.
- */
-#define HV_FAST_CPU_MONDO_SEND 0x42
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
-#endif
-
-/* cpu_myid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_MYID
- * RET0: status
- * RET1: CPU ID
- * ERRORS: No errors defined.
- *
- * Return the hypervisor ID handle for the current CPU. Use by a
- * virtual CPU to discover it's own identity.
- */
-#define HV_FAST_CPU_MYID 0x16
-
-/* cpu_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_STATE
- * ARG0: CPU ID
- * RET0: status
- * RET1: state
- * ERRORS: ENOCPU Invalid CPU ID
- *
- * Retrieve the current state of the CPU with the given CPU ID.
- */
-#define HV_FAST_CPU_STATE 0x17
-#define HV_CPU_STATE_STOPPED 0x01
-#define HV_CPU_STATE_RUNNING 0x02
-#define HV_CPU_STATE_ERROR 0x03
-
-#ifndef __ASSEMBLY__
-extern long sun4v_cpu_state(unsigned long cpuid);
-#endif
-
-/* cpu_set_rtba()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_SET_RTBA
- * ARG0: RTBA
- * RET0: status
- * RET1: previous RTBA
- * ERRORS: ENORADDR Invalid RTBA real address
- * EBADALIGN RTBA is incorrectly aligned for a trap table
- *
- * Set the real trap base address of the local cpu to the given RTBA.
- * The supplied RTBA must be aligned on a 256 byte boundary. Upon
- * success the previous value of the RTBA is returned in RET1.
- *
- * Note: This service does not affect %tba
- */
-#define HV_FAST_CPU_SET_RTBA 0x18
-
-/* cpu_set_rtba()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CPU_GET_RTBA
- * RET0: status
- * RET1: previous RTBA
- * ERRORS: No possible error.
- *
- * Returns the current value of RTBA in RET1.
- */
-#define HV_FAST_CPU_GET_RTBA 0x19
-
-/* MMU services.
- *
- * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
- */
-#ifndef __ASSEMBLY__
-struct hv_tsb_descr {
- unsigned short pgsz_idx;
- unsigned short assoc;
- unsigned int num_ttes; /* in TTEs */
- unsigned int ctx_idx;
- unsigned int pgsz_mask;
- unsigned long tsb_base;
- unsigned long resv;
-};
-#endif
-#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00
-#define HV_TSB_DESCR_ASSOC_OFFSET 0x02
-#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04
-#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08
-#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c
-#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10
-#define HV_TSB_DESCR_RESV_OFFSET 0x18
-
-/* Page size bitmask. */
-#define HV_PGSZ_MASK_8K (1 << 0)
-#define HV_PGSZ_MASK_64K (1 << 1)
-#define HV_PGSZ_MASK_512K (1 << 2)
-#define HV_PGSZ_MASK_4MB (1 << 3)
-#define HV_PGSZ_MASK_32MB (1 << 4)
-#define HV_PGSZ_MASK_256MB (1 << 5)
-#define HV_PGSZ_MASK_2GB (1 << 6)
-#define HV_PGSZ_MASK_16GB (1 << 7)
-
-/* Page size index. The value given in the TSB descriptor must correspond
- * to the smallest page size specified in the pgsz_mask page size bitmask.
- */
-#define HV_PGSZ_IDX_8K 0
-#define HV_PGSZ_IDX_64K 1
-#define HV_PGSZ_IDX_512K 2
-#define HV_PGSZ_IDX_4MB 3
-#define HV_PGSZ_IDX_32MB 4
-#define HV_PGSZ_IDX_256MB 5
-#define HV_PGSZ_IDX_2GB 6
-#define HV_PGSZ_IDX_16GB 7
-
-/* MMU fault status area.
- *
- * MMU related faults have their status and fault address information
- * placed into a memory region made available by privileged code. Each
- * virtual processor must make a mmu_fault_area_conf() call to tell the
- * hypervisor where that processor's fault status should be stored.
- *
- * The fault status block is a multiple of 64-bytes and must be aligned
- * on a 64-byte boundary.
- */
-#ifndef __ASSEMBLY__
-struct hv_fault_status {
- unsigned long i_fault_type;
- unsigned long i_fault_addr;
- unsigned long i_fault_ctx;
- unsigned long i_reserved[5];
- unsigned long d_fault_type;
- unsigned long d_fault_addr;
- unsigned long d_fault_ctx;
- unsigned long d_reserved[5];
-};
-#endif
-#define HV_FAULT_I_TYPE_OFFSET 0x00
-#define HV_FAULT_I_ADDR_OFFSET 0x08
-#define HV_FAULT_I_CTX_OFFSET 0x10
-#define HV_FAULT_D_TYPE_OFFSET 0x40
-#define HV_FAULT_D_ADDR_OFFSET 0x48
-#define HV_FAULT_D_CTX_OFFSET 0x50
-
-#define HV_FAULT_TYPE_FAST_MISS 1
-#define HV_FAULT_TYPE_FAST_PROT 2
-#define HV_FAULT_TYPE_MMU_MISS 3
-#define HV_FAULT_TYPE_INV_RA 4
-#define HV_FAULT_TYPE_PRIV_VIOL 5
-#define HV_FAULT_TYPE_PROT_VIOL 6
-#define HV_FAULT_TYPE_NFO 7
-#define HV_FAULT_TYPE_NFO_SEFF 8
-#define HV_FAULT_TYPE_INV_VA 9
-#define HV_FAULT_TYPE_INV_ASI 10
-#define HV_FAULT_TYPE_NC_ATOMIC 11
-#define HV_FAULT_TYPE_PRIV_ACT 12
-#define HV_FAULT_TYPE_RESV1 13
-#define HV_FAULT_TYPE_UNALIGNED 14
-#define HV_FAULT_TYPE_INV_PGSZ 15
-/* Values 16 --> -2 are reserved. */
-#define HV_FAULT_TYPE_MULTIPLE -1
-
-/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
- * and mmu_{map,unmap}_perm_addr().
- */
-#define HV_MMU_DMMU 0x01
-#define HV_MMU_IMMU 0x02
-#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU)
-
-/* mmu_map_addr()
- * TRAP: HV_MMU_MAP_ADDR_TRAP
- * ARG0: virtual address
- * ARG1: mmu context
- * ARG2: TTE
- * ARG3: flags (HV_MMU_{IMMU,DMMU})
- * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
- * EBADPGSZ Invalid page size value
- * ENORADDR Invalid real address in TTE
- *
- * Create a non-permanent mapping using the given TTE, virtual
- * address, and mmu context. The flags argument determines which
- * (data, or instruction, or both) TLB the mapping gets loaded into.
- *
- * The behavior is undefined if the valid bit is clear in the TTE.
- *
- * Note: This API call is for privileged code to specify temporary translation
- * mappings without the need to create and manage a TSB.
- */
-
-/* mmu_unmap_addr()
- * TRAP: HV_MMU_UNMAP_ADDR_TRAP
- * ARG0: virtual address
- * ARG1: mmu context
- * ARG2: flags (HV_MMU_{IMMU,DMMU})
- * ERRORS: EINVAL Invalid virtual address, mmu context, or flags
- *
- * Demaps the given virtual address in the given mmu context on this
- * CPU. This function is intended to be used to demap pages mapped
- * with mmu_map_addr. This service is equivalent to invoking
- * mmu_demap_page() with only the current CPU in the CPU list. The
- * flags argument determines which (data, or instruction, or both) TLB
- * the mapping gets unmapped from.
- *
- * Attempting to perform an unmap operation for a previously defined
- * permanent mapping will have undefined results.
- */
-
-/* mmu_tsb_ctx0()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTX0
- * ARG0: number of TSB descriptions
- * ARG1: TSB descriptions pointer
- * RET0: status
- * ERRORS: ENORADDR Invalid TSB descriptions pointer or
- * TSB base within a descriptor
- * EBADALIGN TSB descriptions pointer is not aligned
- * to an 8-byte boundary, or TSB base
- * within a descriptor is not aligned for
- * the given TSB size
- * EBADPGSZ Invalid page size in a TSB descriptor
- * EBADTSB Invalid associativity or size in a TSB
- * descriptor
- * EINVAL Invalid number of TSB descriptions, or
- * invalid context index in a TSB
- * descriptor, or index page size not
- * equal to smallest page size in page
- * size bitmask field.
- *
- * Configures the TSBs for the current CPU for virtual addresses with
- * context zero. The TSB descriptions pointer is a pointer to an
- * array of the given number of TSB descriptions.
- *
- * Note: The maximum number of TSBs available to a virtual CPU is given by the
- * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
- * machine description.
- */
-#define HV_FAST_MMU_TSB_CTX0 0x20
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
- unsigned long tsb_desc_ra);
-#endif
-
-/* mmu_tsb_ctxnon0()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTXNON0
- * ARG0: number of TSB descriptions
- * ARG1: TSB descriptions pointer
- * RET0: status
- * ERRORS: Same as for mmu_tsb_ctx0() above.
- *
- * Configures the TSBs for the current CPU for virtual addresses with
- * non-zero contexts. The TSB descriptions pointer is a pointer to an
- * array of the given number of TSB descriptions.
- *
- * Note: A maximum of 16 TSBs may be specified in the TSB description list.
- */
-#define HV_FAST_MMU_TSB_CTXNON0 0x21
-
-/* mmu_demap_page()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_DEMAP_PAGE
- * ARG0: reserved, must be zero
- * ARG1: reserved, must be zero
- * ARG2: virtual address
- * ARG3: mmu context
- * ARG4: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid virutal address, context, or
- * flags value
- * ENOTSUPPORTED ARG0 or ARG1 is non-zero
- *
- * Demaps any page mapping of the given virtual address in the given
- * mmu context for the current virtual CPU. Any virtually tagged
- * caches are guaranteed to be kept consistent. The flags argument
- * determines which TLB (instruction, or data, or both) participate in
- * the operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_PAGE 0x22
-
-/* mmu_demap_ctx()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_DEMAP_CTX
- * ARG0: reserved, must be zero
- * ARG1: reserved, must be zero
- * ARG2: mmu context
- * ARG3: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid context or flags value
- * ENOTSUPPORTED ARG0 or ARG1 is non-zero
- *
- * Demaps all non-permanent virtual page mappings previously specified
- * for the given context for the current virtual CPU. Any virtual
- * tagged caches are guaranteed to be kept consistent. The flags
- * argument determines which TLB (instruction, or data, or both)
- * participate in the operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_CTX 0x23
-
-/* mmu_demap_all()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_DEMAP_ALL
- * ARG0: reserved, must be zero
- * ARG1: reserved, must be zero
- * ARG2: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid flags value
- * ENOTSUPPORTED ARG0 or ARG1 is non-zero
- *
- * Demaps all non-permanent virtual page mappings previously specified
- * for the current virtual CPU. Any virtual tagged caches are
- * guaranteed to be kept consistent. The flags argument determines
- * which TLB (instruction, or data, or both) participate in the
- * operation.
- *
- * ARG0 and ARG1 are both reserved and must be set to zero.
- */
-#define HV_FAST_MMU_DEMAP_ALL 0x24
-
-#ifndef __ASSEMBLY__
-extern void sun4v_mmu_demap_all(void);
-#endif
-
-/* mmu_map_perm_addr()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR
- * ARG0: virtual address
- * ARG1: reserved, must be zero
- * ARG2: TTE
- * ARG3: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid virutal address or flags value
- * EBADPGSZ Invalid page size value
- * ENORADDR Invalid real address in TTE
- * ETOOMANY Too many mappings (max of 8 reached)
- *
- * Create a permanent mapping using the given TTE and virtual address
- * for context 0 on the calling virtual CPU. A maximum of 8 such
- * permanent mappings may be specified by privileged code. Mappings
- * may be removed with mmu_unmap_perm_addr().
- *
- * The behavior is undefined if a TTE with the valid bit clear is given.
- *
- * Note: This call is used to specify address space mappings for which
- * privileged code does not expect to receive misses. For example,
- * this mechanism can be used to map kernel nucleus code and data.
- */
-#define HV_FAST_MMU_MAP_PERM_ADDR 0x25
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
- unsigned long set_to_zero,
- unsigned long tte,
- unsigned long flags);
-#endif
-
-/* mmu_fault_area_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF
- * ARG0: real address
- * RET0: status
- * RET1: previous mmu fault area real address
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Invalid alignment for fault area
- *
- * Configure the MMU fault status area for the calling CPU. A 64-byte
- * aligned real address specifies where MMU fault status information
- * is placed. The return value is the previously specified area, or 0
- * for the first invocation. Specifying a fault area at real address
- * 0 is not allowed.
- */
-#define HV_FAST_MMU_FAULT_AREA_CONF 0x26
-
-/* mmu_enable()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_ENABLE
- * ARG0: enable flag
- * ARG1: return target address
- * RET0: status
- * ERRORS: ENORADDR Invalid real address when disabling
- * translation.
- * EBADALIGN The return target address is not
- * aligned to an instruction.
- * EINVAL The enable flag request the current
- * operating mode (e.g. disable if already
- * disabled)
- *
- * Enable or disable virtual address translation for the calling CPU
- * within the virtual machine domain. If the enable flag is zero,
- * translation is disabled, any non-zero value will enable
- * translation.
- *
- * When this function returns, the newly selected translation mode
- * will be active. If the mmu is being enabled, then the return
- * target address is a virtual address else it is a real address.
- *
- * Upon successful completion, control will be returned to the given
- * return target address (ie. the cpu will jump to that address). On
- * failure, the previous mmu mode remains and the trap simply returns
- * as normal with the appropriate error code in RET0.
- */
-#define HV_FAST_MMU_ENABLE 0x27
-
-/* mmu_unmap_perm_addr()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR
- * ARG0: virtual address
- * ARG1: reserved, must be zero
- * ARG2: flags (HV_MMU_{IMMU,DMMU})
- * RET0: status
- * ERRORS: EINVAL Invalid virutal address or flags value
- * ENOMAP Specified mapping was not found
- *
- * Demaps any permanent page mapping (established via
- * mmu_map_perm_addr()) at the given virtual address for context 0 on
- * the current virtual CPU. Any virtual tagged caches are guaranteed
- * to be kept consistent.
- */
-#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28
-
-/* mmu_tsb_ctx0_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO
- * ARG0: max TSBs
- * ARG1: buffer pointer
- * RET0: status
- * RET1: number of TSBs
- * ERRORS: EINVAL Supplied buffer is too small
- * EBADALIGN The buffer pointer is badly aligned
- * ENORADDR Invalid real address for buffer pointer
- *
- * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
- * into the provided buffer. The size of the buffer is given in ARG1
- * in terms of the number of TSB description entries.
- *
- * Upon return, RET1 always contains the number of TSB descriptions
- * previously configured. If zero TSBs were configured, EOK is
- * returned with RET1 containing 0.
- */
-#define HV_FAST_MMU_TSB_CTX0_INFO 0x29
-
-/* mmu_tsb_ctxnon0_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO
- * ARG0: max TSBs
- * ARG1: buffer pointer
- * RET0: status
- * RET1: number of TSBs
- * ERRORS: EINVAL Supplied buffer is too small
- * EBADALIGN The buffer pointer is badly aligned
- * ENORADDR Invalid real address for buffer pointer
- *
- * Return the TSB configuration as previous defined by
- * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer
- * is given in ARG1 in terms of the number of TSB description entries.
- *
- * Upon return, RET1 always contains the number of TSB descriptions
- * previously configured. If zero TSBs were configured, EOK is
- * returned with RET1 containing 0.
- */
-#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a
-
-/* mmu_fault_area_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO
- * RET0: status
- * RET1: fault area real address
- * ERRORS: No errors defined.
- *
- * Return the currently defined MMU fault status area for the current
- * CPU. The real address of the fault status area is returned in
- * RET1, or 0 is returned in RET1 if no fault status area is defined.
- *
- * Note: mmu_fault_area_conf() may be called with the return value (RET1)
- * from this service if there is a need to save and restore the fault
- * area for a cpu.
- */
-#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b
-
-/* Cache and Memory services. */
-
-/* mem_scrub()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MEM_SCRUB
- * ARG0: real address
- * ARG1: length
- * RET0: status
- * RET1: length scrubbed
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Start address or length are not correctly
- * aligned
- * EINVAL Length is zero
- *
- * Zero the memory contents in the range real address to real address
- * plus length minus 1. Also, valid ECC will be generated for that
- * memory address range. Scrubbing is started at the given real
- * address, but may not scrub the entire given length. The actual
- * length scrubbed will be returned in RET1.
- *
- * The real address and length must be aligned on an 8K boundary, or
- * contain the start address and length from a sun4v error report.
- *
- * Note: There are two uses for this function. The first use is to block clear
- * and initialize memory and the second is to scrub an u ncorrectable
- * error reported via a resumable or non-resumable trap. The second
- * use requires the arguments to be equal to the real address and length
- * provided in a sun4v memory error report.
- */
-#define HV_FAST_MEM_SCRUB 0x31
-
-/* mem_sync()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MEM_SYNC
- * ARG0: real address
- * ARG1: length
- * RET0: status
- * RET1: length synced
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Start address or length are not correctly
- * aligned
- * EINVAL Length is zero
- *
- * Force the next access within the real address to real address plus
- * length minus 1 to be fetches from main system memory. Less than
- * the given length may be synced, the actual amount synced is
- * returned in RET1. The real address and length must be aligned on
- * an 8K boundary.
- */
-#define HV_FAST_MEM_SYNC 0x32
-
-/* Time of day services.
- *
- * The hypervisor maintains the time of day on a per-domain basis.
- * Changing the time of day in one domain does not affect the time of
- * day on any other domain.
- *
- * Time is described by a single unsigned 64-bit word which is the
- * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
- * 1970).
- */
-
-/* tod_get()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TOD_GET
- * RET0: status
- * RET1: TOD
- * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
- * ENOTSUPPORTED If TOD not supported on this platform
- *
- * Return the current time of day. May block if TOD access is
- * temporarily not possible.
- */
-#define HV_FAST_TOD_GET 0x50
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_tod_get(unsigned long *time);
-#endif
-
-/* tod_set()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TOD_SET
- * ARG0: TOD
- * RET0: status
- * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable
- * ENOTSUPPORTED If TOD not supported on this platform
- *
- * The current time of day is set to the value specified in ARG0. May
- * block if TOD access is temporarily not possible.
- */
-#define HV_FAST_TOD_SET 0x51
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_tod_set(unsigned long time);
-#endif
-
-/* Console services */
-
-/* con_getchar()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_GETCHAR
- * RET0: status
- * RET1: character
- * ERRORS: EWOULDBLOCK No character available.
- *
- * Returns a character from the console device. If no character is
- * available then an EWOULDBLOCK error is returned. If a character is
- * available, then the returned status is EOK and the character value
- * is in RET1.
- *
- * A virtual BREAK is represented by the 64-bit value -1.
- *
- * A virtual HUP signal is represented by the 64-bit value -2.
- */
-#define HV_FAST_CONS_GETCHAR 0x60
-
-/* con_putchar()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_PUTCHAR
- * ARG0: character
- * RET0: status
- * ERRORS: EINVAL Illegal character
- * EWOULDBLOCK Output buffer currently full, would block
- *
- * Send a character to the console device. Only character values
- * between 0 and 255 may be used. Values outside this range are
- * invalid except for the 64-bit value -1 which is used to send a
- * virtual BREAK.
- */
-#define HV_FAST_CONS_PUTCHAR 0x61
-
-/* con_read()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_READ
- * ARG0: buffer real address
- * ARG1: buffer size in bytes
- * RET0: status
- * RET1: bytes read or BREAK or HUP
- * ERRORS: EWOULDBLOCK No character available.
- *
- * Reads characters into a buffer from the console device. If no
- * character is available then an EWOULDBLOCK error is returned.
- * If a character is available, then the returned status is EOK
- * and the number of bytes read into the given buffer is provided
- * in RET1.
- *
- * A virtual BREAK is represented by the 64-bit RET1 value -1.
- *
- * A virtual HUP signal is represented by the 64-bit RET1 value -2.
- *
- * If BREAK or HUP are indicated, no bytes were read into buffer.
- */
-#define HV_FAST_CONS_READ 0x62
-
-/* con_write()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_CONS_WRITE
- * ARG0: buffer real address
- * ARG1: buffer size in bytes
- * RET0: status
- * RET1: bytes written
- * ERRORS: EWOULDBLOCK Output buffer currently full, would block
- *
- * Send a characters in buffer to the console device. Breaks must be
- * sent using con_putchar().
- */
-#define HV_FAST_CONS_WRITE 0x63
-
-#ifndef __ASSEMBLY__
-extern long sun4v_con_getchar(long *status);
-extern long sun4v_con_putchar(long c);
-extern long sun4v_con_read(unsigned long buffer,
- unsigned long size,
- unsigned long *bytes_read);
-extern unsigned long sun4v_con_write(unsigned long buffer,
- unsigned long size,
- unsigned long *bytes_written);
-#endif
-
-/* mach_set_soft_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE
- * ARG0: software state
- * ARG1: software state description pointer
- * RET0: status
- * ERRORS: EINVAL software state not valid or software state
- * description is not NULL terminated
- * ENORADDR software state description pointer is not a
- * valid real address
- * EBADALIGNED software state description is not correctly
- * aligned
- *
- * This allows the guest to report it's soft state to the hypervisor. There
- * are two primary components to this state. The first part states whether
- * the guest software is running or not. The second containts optional
- * details specific to the software.
- *
- * The software state argument is defined below in HV_SOFT_STATE_*, and
- * indicates whether the guest is operating normally or in a transitional
- * state.
- *
- * The software state description argument is a real address of a data buffer
- * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL
- * terminated 7-bit ASCII string of up to 31 characters not including the
- * NULL termination.
- */
-#define HV_FAST_MACH_SET_SOFT_STATE 0x70
-#define HV_SOFT_STATE_NORMAL 0x01
-#define HV_SOFT_STATE_TRANSITION 0x02
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
- unsigned long msg_string_ra);
-#endif
-
-/* mach_get_soft_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE
- * ARG0: software state description pointer
- * RET0: status
- * RET1: software state
- * ERRORS: ENORADDR software state description pointer is not a
- * valid real address
- * EBADALIGNED software state description is not correctly
- * aligned
- *
- * Retrieve the current value of the guest's software state. The rules
- * for the software state pointer are the same as for mach_set_soft_state()
- * above.
- */
-#define HV_FAST_MACH_GET_SOFT_STATE 0x71
-
-/* svc_send()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_SEND
- * ARG0: service ID
- * ARG1: buffer real address
- * ARG2: buffer size
- * RET0: STATUS
- * RET1: sent_bytes
- *
- * Be careful, all output registers are clobbered by this operation,
- * so for example it is not possible to save away a value in %o4
- * across the trap.
- */
-#define HV_FAST_SVC_SEND 0x80
-
-/* svc_recv()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_RECV
- * ARG0: service ID
- * ARG1: buffer real address
- * ARG2: buffer size
- * RET0: STATUS
- * RET1: recv_bytes
- *
- * Be careful, all output registers are clobbered by this operation,
- * so for example it is not possible to save away a value in %o4
- * across the trap.
- */
-#define HV_FAST_SVC_RECV 0x81
-
-/* svc_getstatus()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_GETSTATUS
- * ARG0: service ID
- * RET0: STATUS
- * RET1: status bits
- */
-#define HV_FAST_SVC_GETSTATUS 0x82
-
-/* svc_setstatus()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_SETSTATUS
- * ARG0: service ID
- * ARG1: bits to set
- * RET0: STATUS
- */
-#define HV_FAST_SVC_SETSTATUS 0x83
-
-/* svc_clrstatus()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SVC_CLRSTATUS
- * ARG0: service ID
- * ARG1: bits to clear
- * RET0: STATUS
- */
-#define HV_FAST_SVC_CLRSTATUS 0x84
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_svc_send(unsigned long svc_id,
- unsigned long buffer,
- unsigned long buffer_size,
- unsigned long *sent_bytes);
-extern unsigned long sun4v_svc_recv(unsigned long svc_id,
- unsigned long buffer,
- unsigned long buffer_size,
- unsigned long *recv_bytes);
-extern unsigned long sun4v_svc_getstatus(unsigned long svc_id,
- unsigned long *status_bits);
-extern unsigned long sun4v_svc_setstatus(unsigned long svc_id,
- unsigned long status_bits);
-extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id,
- unsigned long status_bits);
-#endif
-
-/* Trap trace services.
- *
- * The hypervisor provides a trap tracing capability for privileged
- * code running on each virtual CPU. Privileged code provides a
- * round-robin trap trace queue within which the hypervisor writes
- * 64-byte entries detailing hyperprivileged traps taken n behalf of
- * privileged code. This is provided as a debugging capability for
- * privileged code.
- *
- * The trap trace control structure is 64-bytes long and placed at the
- * start (offset 0) of the trap trace buffer, and is described as
- * follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_trap_trace_control {
- unsigned long head_offset;
- unsigned long tail_offset;
- unsigned long __reserved[0x30 / sizeof(unsigned long)];
-};
-#endif
-#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00
-#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08
-
-/* The head offset is the offset of the most recently completed entry
- * in the trap-trace buffer. The tail offset is the offset of the
- * next entry to be written. The control structure is owned and
- * modified by the hypervisor. A guest may not modify the control
- * structure contents. Attempts to do so will result in undefined
- * behavior for the guest.
- *
- * Each trap trace buffer entry is layed out as follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_trap_trace_entry {
- unsigned char type; /* Hypervisor or guest entry? */
- unsigned char hpstate; /* Hyper-privileged state */
- unsigned char tl; /* Trap level */
- unsigned char gl; /* Global register level */
- unsigned short tt; /* Trap type */
- unsigned short tag; /* Extended trap identifier */
- unsigned long tstate; /* Trap state */
- unsigned long tick; /* Tick */
- unsigned long tpc; /* Trap PC */
- unsigned long f1; /* Entry specific */
- unsigned long f2; /* Entry specific */
- unsigned long f3; /* Entry specific */
- unsigned long f4; /* Entry specific */
-};
-#endif
-#define HV_TRAP_TRACE_ENTRY_TYPE 0x00
-#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01
-#define HV_TRAP_TRACE_ENTRY_TL 0x02
-#define HV_TRAP_TRACE_ENTRY_GL 0x03
-#define HV_TRAP_TRACE_ENTRY_TT 0x04
-#define HV_TRAP_TRACE_ENTRY_TAG 0x06
-#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08
-#define HV_TRAP_TRACE_ENTRY_TICK 0x10
-#define HV_TRAP_TRACE_ENTRY_TPC 0x18
-#define HV_TRAP_TRACE_ENTRY_F1 0x20
-#define HV_TRAP_TRACE_ENTRY_F2 0x28
-#define HV_TRAP_TRACE_ENTRY_F3 0x30
-#define HV_TRAP_TRACE_ENTRY_F4 0x38
-
-/* The type field is encoded as follows. */
-#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */
-#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */
-#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */
-
-/* ttrace_buf_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_BUF_CONF
- * ARG0: real address
- * ARG1: number of entries
- * RET0: status
- * RET1: number of entries
- * ERRORS: ENORADDR Invalid real address
- * EINVAL Size is too small
- * EBADALIGN Real address not aligned on 64-byte boundary
- *
- * Requests hypervisor trap tracing and declares a virtual CPU's trap
- * trace buffer to the hypervisor. The real address supplies the real
- * base address of the trap trace queue and must be 64-byte aligned.
- * Specifying a value of 0 for the number of entries disables trap
- * tracing for the calling virtual CPU. The buffer allocated must be
- * sized for a power of two number of 64-byte trap trace entries plus
- * an initial 64-byte control structure.
- *
- * This may be invoked any number of times so that a virtual CPU may
- * relocate a trap trace buffer or create "snapshots" of information.
- *
- * If the real address is illegal or badly aligned, then trap tracing
- * is disabled and an error is returned.
- *
- * Upon failure with EINVAL, this service call returns in RET1 the
- * minimum number of buffer entries required. Upon other failures
- * RET1 is undefined.
- */
-#define HV_FAST_TTRACE_BUF_CONF 0x90
-
-/* ttrace_buf_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_BUF_INFO
- * RET0: status
- * RET1: real address
- * RET2: size
- * ERRORS: None defined.
- *
- * Returns the size and location of the previously declared trap-trace
- * buffer. In the event that no buffer was previously defined, or the
- * buffer is disabled, this call will return a size of zero bytes.
- */
-#define HV_FAST_TTRACE_BUF_INFO 0x91
-
-/* ttrace_enable()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_ENABLE
- * ARG0: enable
- * RET0: status
- * RET1: previous enable state
- * ERRORS: EINVAL No trap trace buffer currently defined
- *
- * Enable or disable trap tracing, and return the previous enabled
- * state in RET1. Future systems may define various flags for the
- * enable argument (ARG0), for the moment a guest should pass
- * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
- * tracing - which will ensure future compatability.
- */
-#define HV_FAST_TTRACE_ENABLE 0x92
-
-/* ttrace_freeze()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_TTRACE_FREEZE
- * ARG0: freeze
- * RET0: status
- * RET1: previous freeze state
- * ERRORS: EINVAL No trap trace buffer currently defined
- *
- * Freeze or unfreeze trap tracing, returning the previous freeze
- * state in RET1. A guest should pass a non-zero value to freeze and
- * a zero value to unfreeze all tracing. The returned previous state
- * is 0 for not frozen and 1 for frozen.
- */
-#define HV_FAST_TTRACE_FREEZE 0x93
-
-/* ttrace_addentry()
- * TRAP: HV_TTRACE_ADDENTRY_TRAP
- * ARG0: tag (16-bits)
- * ARG1: data word 0
- * ARG2: data word 1
- * ARG3: data word 2
- * ARG4: data word 3
- * RET0: status
- * ERRORS: EINVAL No trap trace buffer currently defined
- *
- * Add an entry to the trap trace buffer. Upon return only ARG0/RET0
- * is modified - none of the other registers holding arguments are
- * volatile across this hypervisor service.
- */
-
-/* Core dump services.
- *
- * Since the hypervisor viraulizes and thus obscures a lot of the
- * physical machine layout and state, traditional OS crash dumps can
- * be difficult to diagnose especially when the problem is a
- * configuration error of some sort.
- *
- * The dump services provide an opaque buffer into which the
- * hypervisor can place it's internal state in order to assist in
- * debugging such situations. The contents are opaque and extremely
- * platform and hypervisor implementation specific. The guest, during
- * a core dump, requests that the hypervisor update any information in
- * the dump buffer in preparation to being dumped as part of the
- * domain's memory image.
- */
-
-/* dump_buf_update()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_DUMP_BUF_UPDATE
- * ARG0: real address
- * ARG1: size
- * RET0: status
- * RET1: required size of dump buffer
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Real address is not aligned on a 64-byte
- * boundary
- * EINVAL Size is non-zero but less than minimum size
- * required
- * ENOTSUPPORTED Operation not supported on current logical
- * domain
- *
- * Declare a domain dump buffer to the hypervisor. The real address
- * provided for the domain dump buffer must be 64-byte aligned. The
- * size specifies the size of the dump buffer and may be larger than
- * the minimum size specified in the machine description. The
- * hypervisor will fill the dump buffer with opaque data.
- *
- * Note: A guest may elect to include dump buffer contents as part of a crash
- * dump to assist with debugging. This function may be called any number
- * of times so that a guest may relocate a dump buffer, or create
- * "snapshots" of any dump-buffer information. Each call to
- * dump_buf_update() atomically declares the new dump buffer to the
- * hypervisor.
- *
- * A specified size of 0 unconfigures the dump buffer. If the real
- * address is illegal or badly aligned, then any currently active dump
- * buffer is disabled and an error is returned.
- *
- * In the event that the call fails with EINVAL, RET1 contains the
- * minimum size requires by the hypervisor for a valid dump buffer.
- */
-#define HV_FAST_DUMP_BUF_UPDATE 0x94
-
-/* dump_buf_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_DUMP_BUF_INFO
- * RET0: status
- * RET1: real address of current dump buffer
- * RET2: size of current dump buffer
- * ERRORS: No errors defined.
- *
- * Return the currently configures dump buffer description. A
- * returned size of 0 bytes indicates an undefined dump buffer. In
- * this case the return address in RET1 is undefined.
- */
-#define HV_FAST_DUMP_BUF_INFO 0x95
-
-/* Device interrupt services.
- *
- * Device interrupts are allocated to system bus bridges by the hypervisor,
- * and described to OBP in the machine description. OBP then describes
- * these interrupts to the OS via properties in the device tree.
- *
- * Terminology:
- *
- * cpuid Unique opaque value which represents a target cpu.
- *
- * devhandle Device handle. It uniquely identifies a device, and
- * consistes of the lower 28-bits of the hi-cell of the
- * first entry of the device's "reg" property in the
- * OBP device tree.
- *
- * devino Device interrupt number. Specifies the relative
- * interrupt number within the device. The unique
- * combination of devhandle and devino are used to
- * identify a specific device interrupt.
- *
- * Note: The devino value is the same as the values in the
- * "interrupts" property or "interrupt-map" property
- * in the OBP device tree for that device.
- *
- * sysino System interrupt number. A 64-bit unsigned interger
- * representing a unique interrupt within a virtual
- * machine.
- *
- * intr_state A flag representing the interrupt state for a given
- * sysino. The state values are defined below.
- *
- * intr_enabled A flag representing the 'enabled' state for a given
- * sysino. The enable values are defined below.
- */
-
-#define HV_INTR_STATE_IDLE 0 /* Nothing pending */
-#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */
-#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */
-
-#define HV_INTR_DISABLED 0 /* sysino not enabled */
-#define HV_INTR_ENABLED 1 /* sysino enabled */
-
-/* intr_devino_to_sysino()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO
- * ARG0: devhandle
- * ARG1: devino
- * RET0: status
- * RET1: sysino
- * ERRORS: EINVAL Invalid devhandle/devino
- *
- * Converts a device specific interrupt number of the given
- * devhandle/devino into a system specific ino (sysino).
- */
-#define HV_FAST_INTR_DEVINO2SYSINO 0xa0
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
- unsigned long devino);
-#endif
-
-/* intr_getenabled()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_GETENABLED
- * ARG0: sysino
- * RET0: status
- * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
- * ERRORS: EINVAL Invalid sysino
- *
- * Returns interrupt enabled state in RET1 for the interrupt defined
- * by the given sysino.
- */
-#define HV_FAST_INTR_GETENABLED 0xa1
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
-#endif
-
-/* intr_setenabled()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_SETENABLED
- * ARG0: sysino
- * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED})
- * RET0: status
- * ERRORS: EINVAL Invalid sysino or intr_enabled value
- *
- * Set the 'enabled' state of the interrupt sysino.
- */
-#define HV_FAST_INTR_SETENABLED 0xa2
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
-#endif
-
-/* intr_getstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_GETSTATE
- * ARG0: sysino
- * RET0: status
- * RET1: intr_state (HV_INTR_STATE_*)
- * ERRORS: EINVAL Invalid sysino
- *
- * Returns current state of the interrupt defined by the given sysino.
- */
-#define HV_FAST_INTR_GETSTATE 0xa3
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_getstate(unsigned long sysino);
-#endif
-
-/* intr_setstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_SETSTATE
- * ARG0: sysino
- * ARG1: intr_state (HV_INTR_STATE_*)
- * RET0: status
- * ERRORS: EINVAL Invalid sysino or intr_state value
- *
- * Sets the current state of the interrupt described by the given sysino
- * value.
- *
- * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
- * interrupt for sysino.
- */
-#define HV_FAST_INTR_SETSTATE 0xa4
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
-#endif
-
-/* intr_gettarget()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_GETTARGET
- * ARG0: sysino
- * RET0: status
- * RET1: cpuid
- * ERRORS: EINVAL Invalid sysino
- *
- * Returns CPU that is the current target of the interrupt defined by
- * the given sysino. The CPU value returned is undefined if the target
- * has not been set via intr_settarget().
- */
-#define HV_FAST_INTR_GETTARGET 0xa5
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
-#endif
-
-/* intr_settarget()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_INTR_SETTARGET
- * ARG0: sysino
- * ARG1: cpuid
- * RET0: status
- * ERRORS: EINVAL Invalid sysino
- * ENOCPU Invalid cpuid
- *
- * Set the target CPU for the interrupt defined by the given sysino.
- */
-#define HV_FAST_INTR_SETTARGET 0xa6
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
-#endif
-
-/* vintr_get_cookie()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_COOKIE
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: cookie
- */
-#define HV_FAST_VINTR_GET_COOKIE 0xa7
-
-/* vintr_set_cookie()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_COOKIE
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: cookie
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_COOKIE 0xa8
-
-/* vintr_get_valid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_VALID
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: valid state
- */
-#define HV_FAST_VINTR_GET_VALID 0xa9
-
-/* vintr_set_valid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_VALID
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: valid state
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_VALID 0xaa
-
-/* vintr_get_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_STATE
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: state
- */
-#define HV_FAST_VINTR_GET_STATE 0xab
-
-/* vintr_set_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_STATE
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: state
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_STATE 0xac
-
-/* vintr_get_target()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_GET_TARGET
- * ARG0: device handle
- * ARG1: device ino
- * RET0: status
- * RET1: cpuid
- */
-#define HV_FAST_VINTR_GET_TARGET 0xad
-
-/* vintr_set_target()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_VINTR_SET_TARGET
- * ARG0: device handle
- * ARG1: device ino
- * ARG2: cpuid
- * RET0: status
- */
-#define HV_FAST_VINTR_SET_TARGET 0xae
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *cookie);
-extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long cookie);
-extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *valid);
-extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long valid);
-extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *state);
-extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long state);
-extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long *cpuid);
-extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
- unsigned long dev_ino,
- unsigned long cpuid);
-#endif
-
-/* PCI IO services.
- *
- * See the terminology descriptions in the device interrupt services
- * section above as those apply here too. Here are terminology
- * definitions specific to these PCI IO services:
- *
- * tsbnum TSB number. Indentifies which io-tsb is used.
- * For this version of the specification, tsbnum
- * must be zero.
- *
- * tsbindex TSB index. Identifies which entry in the TSB
- * is used. The first entry is zero.
- *
- * tsbid A 64-bit aligned data structure which contains
- * a tsbnum and a tsbindex. Bits 63:32 contain the
- * tsbnum and bits 31:00 contain the tsbindex.
- *
- * Use the HV_PCI_TSBID() macro to construct such
- * values.
- *
- * io_attributes IO attributes for IOMMU mappings. One of more
- * of the attritbute bits are stores in a 64-bit
- * value. The values are defined below.
- *
- * r_addr 64-bit real address
- *
- * pci_device PCI device address. A PCI device address identifies
- * a specific device on a specific PCI bus segment.
- * A PCI device address ia a 32-bit unsigned integer
- * with the following format:
- *
- * 00000000.bbbbbbbb.dddddfff.00000000
- *
- * Use the HV_PCI_DEVICE_BUILD() macro to construct
- * such values.
- *
- * pci_config_offset
- * PCI configureation space offset. For conventional
- * PCI a value between 0 and 255. For extended
- * configuration space, a value between 0 and 4095.
- *
- * Note: For PCI configuration space accesses, the offset
- * must be aligned to the access size.
- *
- * error_flag A return value which specifies if the action succeeded
- * or failed. 0 means no error, non-0 means some error
- * occurred while performing the service.
- *
- * io_sync_direction
- * Direction definition for pci_dma_sync(), defined
- * below in HV_PCI_SYNC_*.
- *
- * io_page_list A list of io_page_addresses, an io_page_address is
- * a real address.
- *
- * io_page_list_p A pointer to an io_page_list.
- *
- * "size based byte swap" - Some functions do size based byte swapping
- * which allows sw to access pointers and
- * counters in native form when the processor
- * operates in a different endianness than the
- * IO bus. Size-based byte swapping converts a
- * multi-byte field between big-endian and
- * little-endian format.
- */
-
-#define HV_PCI_MAP_ATTR_READ 0x01
-#define HV_PCI_MAP_ATTR_WRITE 0x02
-
-#define HV_PCI_DEVICE_BUILD(b,d,f) \
- ((((b) & 0xff) << 16) | \
- (((d) & 0x1f) << 11) | \
- (((f) & 0x07) << 8))
-
-#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
- ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
-
-#define HV_PCI_SYNC_FOR_DEVICE 0x01
-#define HV_PCI_SYNC_FOR_CPU 0x02
-
-/* pci_iommu_map()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_MAP
- * ARG0: devhandle
- * ARG1: tsbid
- * ARG2: #ttes
- * ARG3: io_attributes
- * ARG4: io_page_list_p
- * RET0: status
- * RET1: #ttes mapped
- * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes
- * EBADALIGN Improperly aligned real address
- * ENORADDR Invalid real address
- *
- * Create IOMMU mappings in the sun4v device defined by the given
- * devhandle. The mappings are created in the TSB defined by the
- * tsbnum component of the given tsbid. The first mapping is created
- * in the TSB i ndex defined by the tsbindex component of the given tsbid.
- * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
- * the second at tsbnum, tsbindex + 1, etc.
- *
- * All mappings are created with the attributes defined by the io_attributes
- * argument. The page mapping addresses are described in the io_page_list
- * defined by the given io_page_list_p, which is a pointer to the io_page_list.
- * The first entry in the io_page_list is the address for the first iotte, the
- * 2nd for the 2nd iotte, and so on.
- *
- * Each io_page_address in the io_page_list must be appropriately aligned.
- * #ttes must be greater than zero. For this version of the spec, the tsbnum
- * component of the given tsbid must be zero.
- *
- * Returns the actual number of mappings creates, which may be less than
- * or equal to the argument #ttes. If the function returns a value which
- * is less than the #ttes, the caller may continus to call the function with
- * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
- * mapped.
- *
- * Note: This function does not imply an iotte cache flush. The guest must
- * demap an entry before re-mapping it.
- */
-#define HV_FAST_PCI_IOMMU_MAP 0xb0
-
-/* pci_iommu_demap()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP
- * ARG0: devhandle
- * ARG1: tsbid
- * ARG2: #ttes
- * RET0: status
- * RET1: #ttes demapped
- * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
- *
- * Demap and flush IOMMU mappings in the device defined by the given
- * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum
- * component of the given tsbid, starting at the TSB index defined by the
- * tsbindex component of the given tsbid.
- *
- * For this version of the spec, the tsbnum of the given tsbid must be zero.
- * #ttes must be greater than zero.
- *
- * Returns the actual number of ttes demapped, which may be less than or equal
- * to the argument #ttes. If #ttes demapped is less than #ttes, the caller
- * may continue to call this function with updated tsbid and #ttes arguments
- * until all pages are demapped.
- *
- * Note: Entries do not have to be mapped to be demapped. A demap of an
- * unmapped page will flush the entry from the tte cache.
- */
-#define HV_FAST_PCI_IOMMU_DEMAP 0xb1
-
-/* pci_iommu_getmap()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP
- * ARG0: devhandle
- * ARG1: tsbid
- * RET0: status
- * RET1: io_attributes
- * RET2: real address
- * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex
- * ENOMAP Mapping is not valid, no translation exists
- *
- * Read and return the mapping in the device described by the given devhandle
- * and tsbid. If successful, the io_attributes shall be returned in RET1
- * and the page address of the mapping shall be returned in RET2.
- *
- * For this version of the spec, the tsbnum component of the given tsbid
- * must be zero.
- */
-#define HV_FAST_PCI_IOMMU_GETMAP 0xb2
-
-/* pci_iommu_getbypass()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: io_attributes
- * RET0: status
- * RET1: io_addr
- * ERRORS: EINVAL Invalid devhandle/io_attributes
- * ENORADDR Invalid real address
- * ENOTSUPPORTED Function not supported in this implementation.
- *
- * Create a "special" mapping in the device described by the given devhandle,
- * for the given real address and attributes. Return the IO address in RET1
- * if successful.
- */
-#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3
-
-/* pci_config_get()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_CONFIG_GET
- * ARG0: devhandle
- * ARG1: pci_device
- * ARG2: pci_config_offset
- * ARG3: size
- * RET0: status
- * RET1: error_flag
- * RET2: data
- * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
- * EBADALIGN pci_config_offset not size aligned
- * ENOACCESS Access to this offset is not permitted
- *
- * Read PCI configuration space for the adapter described by the given
- * devhandle. Read size (1, 2, or 4) bytes of data from the given
- * pci_device, at pci_config_offset from the beginning of the device's
- * configuration space. If there was no error, RET1 is set to zero and
- * RET2 is set to the data read. Insignificant bits in RET2 are not
- * guarenteed to have any specific value and therefore must be ignored.
- *
- * The data returned in RET2 is size based byte swapped.
- *
- * If an error occurs during the read, set RET1 to a non-zero value. The
- * given pci_config_offset must be 'size' aligned.
- */
-#define HV_FAST_PCI_CONFIG_GET 0xb4
-
-/* pci_config_put()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_CONFIG_PUT
- * ARG0: devhandle
- * ARG1: pci_device
- * ARG2: pci_config_offset
- * ARG3: size
- * ARG4: data
- * RET0: status
- * RET1: error_flag
- * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size
- * EBADALIGN pci_config_offset not size aligned
- * ENOACCESS Access to this offset is not permitted
- *
- * Write PCI configuration space for the adapter described by the given
- * devhandle. Write size (1, 2, or 4) bytes of data in a single operation,
- * at pci_config_offset from the beginning of the device's configuration
- * space. The data argument contains the data to be written to configuration
- * space. Prior to writing, the data is size based byte swapped.
- *
- * If an error occurs during the write access, do not generate an error
- * report, do set RET1 to a non-zero value. Otherwise RET1 is zero.
- * The given pci_config_offset must be 'size' aligned.
- *
- * This function is permitted to read from offset zero in the configuration
- * space described by the given pci_device if necessary to ensure that the
- * write access to config space completes.
- */
-#define HV_FAST_PCI_CONFIG_PUT 0xb5
-
-/* pci_peek()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_PEEK
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: size
- * RET0: status
- * RET1: error_flag
- * RET2: data
- * ERRORS: EINVAL Invalid devhandle or size
- * EBADALIGN Improperly aligned real address
- * ENORADDR Bad real address
- * ENOACCESS Guest access prohibited
- *
- * Attempt to read the IO address given by the given devhandle, real address,
- * and size. Size must be 1, 2, 4, or 8. The read is performed as a single
- * access operation using the given size. If an error occurs when reading
- * from the given location, do not generate an error report, but return a
- * non-zero value in RET1. If the read was successful, return zero in RET1
- * and return the actual data read in RET2. The data returned is size based
- * byte swapped.
- *
- * Non-significant bits in RET2 are not guarenteed to have any specific value
- * and therefore must be ignored. If RET1 is returned as non-zero, the data
- * value is not guarenteed to have any specific value and should be ignored.
- *
- * The caller must have permission to read from the given devhandle, real
- * address, which must be an IO address. The argument real address must be a
- * size aligned address.
- *
- * The hypervisor implementation of this function must block access to any
- * IO address that the guest does not have explicit permission to access.
- */
-#define HV_FAST_PCI_PEEK 0xb6
-
-/* pci_poke()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_POKE
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: size
- * ARG3: data
- * ARG4: pci_device
- * RET0: status
- * RET1: error_flag
- * ERRORS: EINVAL Invalid devhandle, size, or pci_device
- * EBADALIGN Improperly aligned real address
- * ENORADDR Bad real address
- * ENOACCESS Guest access prohibited
- * ENOTSUPPORTED Function is not supported by implementation
- *
- * Attempt to write data to the IO address given by the given devhandle,
- * real address, and size. Size must be 1, 2, 4, or 8. The write is
- * performed as a single access operation using the given size. Prior to
- * writing the data is size based swapped.
- *
- * If an error occurs when writing to the given location, do not generate an
- * error report, but return a non-zero value in RET1. If the write was
- * successful, return zero in RET1.
- *
- * pci_device describes the configuration address of the device being
- * written to. The implementation may safely read from offset 0 with
- * the configuration space of the device described by devhandle and
- * pci_device in order to guarantee that the write portion of the operation
- * completes
- *
- * Any error that occurs due to the read shall be reported using the normal
- * error reporting mechanisms .. the read error is not suppressed.
- *
- * The caller must have permission to write to the given devhandle, real
- * address, which must be an IO address. The argument real address must be a
- * size aligned address. The caller must have permission to read from
- * the given devhandle, pci_device cofiguration space offset 0.
- *
- * The hypervisor implementation of this function must block access to any
- * IO address that the guest does not have explicit permission to access.
- */
-#define HV_FAST_PCI_POKE 0xb7
-
-/* pci_dma_sync()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_DMA_SYNC
- * ARG0: devhandle
- * ARG1: real address
- * ARG2: size
- * ARG3: io_sync_direction
- * RET0: status
- * RET1: #synced
- * ERRORS: EINVAL Invalid devhandle or io_sync_direction
- * ENORADDR Bad real address
- *
- * Synchronize a memory region described by the given real address and size,
- * for the device defined by the given devhandle using the direction(s)
- * defined by the given io_sync_direction. The argument size is the size of
- * the memory region in bytes.
- *
- * Return the actual number of bytes synchronized in the return value #synced,
- * which may be less than or equal to the argument size. If the return
- * value #synced is less than size, the caller must continue to call this
- * function with updated real address and size arguments until the entire
- * memory region is synchronized.
- */
-#define HV_FAST_PCI_DMA_SYNC 0xb8
-
-/* PCI MSI services. */
-
-#define HV_MSITYPE_MSI32 0x00
-#define HV_MSITYPE_MSI64 0x01
-
-#define HV_MSIQSTATE_IDLE 0x00
-#define HV_MSIQSTATE_ERROR 0x01
-
-#define HV_MSIQ_INVALID 0x00
-#define HV_MSIQ_VALID 0x01
-
-#define HV_MSISTATE_IDLE 0x00
-#define HV_MSISTATE_DELIVERED 0x01
-
-#define HV_MSIVALID_INVALID 0x00
-#define HV_MSIVALID_VALID 0x01
-
-#define HV_PCIE_MSGTYPE_PME_MSG 0x18
-#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b
-#define HV_PCIE_MSGTYPE_CORR_MSG 0x30
-#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31
-#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33
-
-#define HV_MSG_INVALID 0x00
-#define HV_MSG_VALID 0x01
-
-/* pci_msiq_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_CONF
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: real address
- * ARG3: number of entries
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle, msiqid or nentries
- * EBADALIGN Improperly aligned real address
- * ENORADDR Bad real address
- *
- * Configure the MSI queue given by the devhandle and msiqid arguments,
- * and to be placed at the given real address and be of the given
- * number of entries. The real address must be aligned exactly to match
- * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry
- * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ
- * Head and Tail are initialized so that the MSI-EQ is 'empty'.
- *
- * Implementation Note: Certain implementations have fixed sized queues. In
- * that case, number of entries must contain the correct
- * value.
- */
-#define HV_FAST_PCI_MSIQ_CONF 0xc0
-
-/* pci_msiq_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_INFO
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: real address
- * RET2: number of entries
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Return the configuration information for the MSI queue described
- * by the given devhandle and msiqid. The base address of the queue
- * is returned in ARG1 and the number of entries is returned in ARG2.
- * If the queue is unconfigured, the real address is undefined and the
- * number of entries will be returned as zero.
- */
-#define HV_FAST_PCI_MSIQ_INFO 0xc1
-
-/* pci_msiq_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the valid state of the MSI-EQ described by the given devhandle and
- * msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETVALID 0xc2
-
-/* pci_msiq_setvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID)
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid
- * value or MSI EQ is uninitialized
- *
- * Set the valid state of the MSI-EQ described by the given devhandle and
- * msiqid to the given msiqvalid.
- */
-#define HV_FAST_PCI_MSIQ_SETVALID 0xc3
-
-/* pci_msiq_getstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the state of the MSI-EQ described by the given devhandle and
- * msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4
-
-/* pci_msiq_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate
- * value or MSI EQ is uninitialized
- *
- * Set the state of the MSI-EQ described by the given devhandle and
- * msiqid to the given msiqvalid.
- */
-#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5
-
-/* pci_msiq_gethead()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqhead
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the current MSI EQ queue head for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6
-
-/* pci_msiq_sethead()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD
- * ARG0: devhandle
- * ARG1: msiqid
- * ARG2: msiqhead
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead,
- * or MSI EQ is uninitialized
- *
- * Set the current MSI EQ queue head for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7
-
-/* pci_msiq_gettail()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL
- * ARG0: devhandle
- * ARG1: msiqid
- * RET0: status
- * RET1: msiqtail
- * ERRORS: EINVAL Invalid devhandle or msiqid
- *
- * Get the current MSI EQ queue tail for the MSI-EQ described by the
- * given devhandle and msiqid.
- */
-#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8
-
-/* pci_msi_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_GETVALID
- * ARG0: devhandle
- * ARG1: msinum
- * RET0: status
- * RET1: msivalidstate
- * ERRORS: EINVAL Invalid devhandle or msinum
- *
- * Get the current valid/enabled state for the MSI defined by the
- * given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_GETVALID 0xc9
-
-/* pci_msi_setvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_SETVALID
- * ARG0: devhandle
- * ARG1: msinum
- * ARG2: msivalidstate
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate
- *
- * Set the current valid/enabled state for the MSI defined by the
- * given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_SETVALID 0xca
-
-/* pci_msi_getmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ
- * ARG0: devhandle
- * ARG1: msinum
- * RET0: status
- * RET1: msiqid
- * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound
- *
- * Get the MSI EQ that the MSI defined by the given devhandle and
- * msinum is bound to.
- */
-#define HV_FAST_PCI_MSI_GETMSIQ 0xcb
-
-/* pci_msi_setmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ
- * ARG0: devhandle
- * ARG1: msinum
- * ARG2: msitype
- * ARG3: msiqid
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msinum or msiqid
- *
- * Set the MSI EQ that the MSI defined by the given devhandle and
- * msinum is bound to.
- */
-#define HV_FAST_PCI_MSI_SETMSIQ 0xcc
-
-/* pci_msi_getstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_GETSTATE
- * ARG0: devhandle
- * ARG1: msinum
- * RET0: status
- * RET1: msistate
- * ERRORS: EINVAL Invalid devhandle or msinum
- *
- * Get the state of the MSI defined by the given devhandle and msinum.
- * If not initialized, return HV_MSISTATE_IDLE.
- */
-#define HV_FAST_PCI_MSI_GETSTATE 0xcd
-
-/* pci_msi_setstate()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSI_SETSTATE
- * ARG0: devhandle
- * ARG1: msinum
- * ARG2: msistate
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msinum or msistate
- *
- * Set the state of the MSI defined by the given devhandle and msinum.
- */
-#define HV_FAST_PCI_MSI_SETSTATE 0xce
-
-/* pci_msg_getmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ
- * ARG0: devhandle
- * ARG1: msgtype
- * RET0: status
- * RET1: msiqid
- * ERRORS: EINVAL Invalid devhandle or msgtype
- *
- * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_GETMSIQ 0xd0
-
-/* pci_msg_setmsiq()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ
- * ARG0: devhandle
- * ARG1: msgtype
- * ARG2: msiqid
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid
- *
- * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_SETMSIQ 0xd1
-
-/* pci_msg_getvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_GETVALID
- * ARG0: devhandle
- * ARG1: msgtype
- * RET0: status
- * RET1: msgvalidstate
- * ERRORS: EINVAL Invalid devhandle or msgtype
- *
- * Get the valid/enabled state of the MSG defined by the given
- * devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_GETVALID 0xd2
-
-/* pci_msg_setvalid()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_PCI_MSG_SETVALID
- * ARG0: devhandle
- * ARG1: msgtype
- * ARG2: msgvalidstate
- * RET0: status
- * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate
- *
- * Set the valid/enabled state of the MSG defined by the given
- * devhandle and msgtype.
- */
-#define HV_FAST_PCI_MSG_SETVALID 0xd3
-
-/* Logical Domain Channel services. */
-
-#define LDC_CHANNEL_DOWN 0
-#define LDC_CHANNEL_UP 1
-#define LDC_CHANNEL_RESETTING 2
-
-/* ldc_tx_qconf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_QCONF
- * ARG0: channel ID
- * ARG1: real address base of queue
- * ARG2: num entries in queue
- * RET0: status
- *
- * Configure transmit queue for the LDC endpoint specified by the
- * given channel ID, to be placed at the given real address, and
- * be of the given num entries. Num entries must be a power of two.
- * The real address base of the queue must be aligned on the queue
- * size. Each queue entry is 64-bytes, so for example, a 32 entry
- * queue must be aligned on a 2048 byte real address boundary.
- *
- * Upon configuration of a valid transmit queue the head and tail
- * pointers are set to a hypervisor specific identical value indicating
- * that the queue initially is empty.
- *
- * The endpoint's transmit queue is un-configured if num entries is zero.
- *
- * The maximum number of entries for each queue for a specific cpu may be
- * determined from the machine description. A transmit queue may be
- * specified even in the event that the LDC is down (peer endpoint has no
- * receive queue specified). Transmission will begin as soon as the peer
- * endpoint defines a receive queue.
- *
- * It is recommended that a guest wait for a transmit queue to empty prior
- * to reconfiguring it, or un-configuring it. Re or un-configuring of a
- * non-empty transmit queue behaves exactly as defined above, however it
- * is undefined as to how many of the pending entries in the original queue
- * will be delivered prior to the re-configuration taking effect.
- * Furthermore, as the queue configuration causes a reset of the head and
- * tail pointers there is no way for a guest to determine how many entries
- * have been sent after the configuration operation.
- */
-#define HV_FAST_LDC_TX_QCONF 0xe0
-
-/* ldc_tx_qinfo()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_QINFO
- * ARG0: channel ID
- * RET0: status
- * RET1: real address base of queue
- * RET2: num entries in queue
- *
- * Return the configuration info for the transmit queue of LDC endpoint
- * defined by the given channel ID. The real address is the currently
- * defined real address base of the defined queue, and num entries is the
- * size of the queue in terms of number of entries.
- *
- * If the specified channel ID is a valid endpoint number, but no transmit
- * queue has been defined this service will return success, but with num
- * entries set to zero and the real address will have an undefined value.
- */
-#define HV_FAST_LDC_TX_QINFO 0xe1
-
-/* ldc_tx_get_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_GET_STATE
- * ARG0: channel ID
- * RET0: status
- * RET1: head offset
- * RET2: tail offset
- * RET3: channel state
- *
- * Return the transmit state, and the head and tail queue pointers, for
- * the transmit queue of the LDC endpoint defined by the given channel ID.
- * The head and tail values are the byte offset of the head and tail
- * positions of the transmit queue for the specified endpoint.
- */
-#define HV_FAST_LDC_TX_GET_STATE 0xe2
-
-/* ldc_tx_set_qtail()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL
- * ARG0: channel ID
- * ARG1: tail offset
- * RET0: status
- *
- * Update the tail pointer for the transmit queue associated with the LDC
- * endpoint defined by the given channel ID. The tail offset specified
- * must be aligned on a 64 byte boundary, and calculated so as to increase
- * the number of pending entries on the transmit queue. Any attempt to
- * decrease the number of pending transmit queue entires is considered
- * an invalid tail offset and will result in an EINVAL error.
- *
- * Since the tail of the transmit queue may not be moved backwards, the
- * transmit queue may be flushed by configuring a new transmit queue,
- * whereupon the hypervisor will configure the initial transmit head and
- * tail pointers to be equal.
- */
-#define HV_FAST_LDC_TX_SET_QTAIL 0xe3
-
-/* ldc_rx_qconf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_QCONF
- * ARG0: channel ID
- * ARG1: real address base of queue
- * ARG2: num entries in queue
- * RET0: status
- *
- * Configure receive queue for the LDC endpoint specified by the
- * given channel ID, to be placed at the given real address, and
- * be of the given num entries. Num entries must be a power of two.
- * The real address base of the queue must be aligned on the queue
- * size. Each queue entry is 64-bytes, so for example, a 32 entry
- * queue must be aligned on a 2048 byte real address boundary.
- *
- * The endpoint's transmit queue is un-configured if num entries is zero.
- *
- * If a valid receive queue is specified for a local endpoint the LDC is
- * in the up state for the purpose of transmission to this endpoint.
- *
- * The maximum number of entries for each queue for a specific cpu may be
- * determined from the machine description.
- *
- * As receive queue configuration causes a reset of the queue's head and
- * tail pointers there is no way for a gues to determine how many entries
- * have been received between a preceeding ldc_get_rx_state() API call
- * and the completion of the configuration operation. It should be noted
- * that datagram delivery is not guarenteed via domain channels anyway,
- * and therefore any higher protocol should be resilient to datagram
- * loss if necessary. However, to overcome this specific race potential
- * it is recommended, for example, that a higher level protocol be employed
- * to ensure either retransmission, or ensure that no datagrams are pending
- * on the peer endpoint's transmit queue prior to the configuration process.
- */
-#define HV_FAST_LDC_RX_QCONF 0xe4
-
-/* ldc_rx_qinfo()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_QINFO
- * ARG0: channel ID
- * RET0: status
- * RET1: real address base of queue
- * RET2: num entries in queue
- *
- * Return the configuration info for the receive queue of LDC endpoint
- * defined by the given channel ID. The real address is the currently
- * defined real address base of the defined queue, and num entries is the
- * size of the queue in terms of number of entries.
- *
- * If the specified channel ID is a valid endpoint number, but no receive
- * queue has been defined this service will return success, but with num
- * entries set to zero and the real address will have an undefined value.
- */
-#define HV_FAST_LDC_RX_QINFO 0xe5
-
-/* ldc_rx_get_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_GET_STATE
- * ARG0: channel ID
- * RET0: status
- * RET1: head offset
- * RET2: tail offset
- * RET3: channel state
- *
- * Return the receive state, and the head and tail queue pointers, for
- * the receive queue of the LDC endpoint defined by the given channel ID.
- * The head and tail values are the byte offset of the head and tail
- * positions of the receive queue for the specified endpoint.
- */
-#define HV_FAST_LDC_RX_GET_STATE 0xe6
-
-/* ldc_rx_set_qhead()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD
- * ARG0: channel ID
- * ARG1: head offset
- * RET0: status
- *
- * Update the head pointer for the receive queue associated with the LDC
- * endpoint defined by the given channel ID. The head offset specified
- * must be aligned on a 64 byte boundary, and calculated so as to decrease
- * the number of pending entries on the receive queue. Any attempt to
- * increase the number of pending receive queue entires is considered
- * an invalid head offset and will result in an EINVAL error.
- *
- * The receive queue may be flushed by setting the head offset equal
- * to the current tail offset.
- */
-#define HV_FAST_LDC_RX_SET_QHEAD 0xe7
-
-/* LDC Map Table Entry. Each slot is defined by a translation table
- * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
- * hypervisor invalidation cookie.
- */
-#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */
-#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */
-#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */
-#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */
-#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */
-#define LDC_MTE_EXEC 0x0000000000000040 /* execute */
-#define LDC_MTE_WRITE 0x0000000000000020 /* read */
-#define LDC_MTE_READ 0x0000000000000010 /* write */
-#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */
-#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */
-#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */
-#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */
-#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */
-#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */
-#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */
-#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */
-#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */
-
-#ifndef __ASSEMBLY__
-struct ldc_mtable_entry {
- unsigned long mte;
- unsigned long cookie;
-};
-#endif
-
-/* ldc_set_map_table()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE
- * ARG0: channel ID
- * ARG1: table real address
- * ARG2: num entries
- * RET0: status
- *
- * Register the MTE table at the given table real address, with the
- * specified num entries, for the LDC indicated by the given channel
- * ID.
- */
-#define HV_FAST_LDC_SET_MAP_TABLE 0xea
-
-/* ldc_get_map_table()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE
- * ARG0: channel ID
- * RET0: status
- * RET1: table real address
- * RET2: num entries
- *
- * Return the configuration of the current mapping table registered
- * for the given channel ID.
- */
-#define HV_FAST_LDC_GET_MAP_TABLE 0xeb
-
-#define LDC_COPY_IN 0
-#define LDC_COPY_OUT 1
-
-/* ldc_copy()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_COPY
- * ARG0: channel ID
- * ARG1: LDC_COPY_* direction code
- * ARG2: target real address
- * ARG3: local real address
- * ARG4: length in bytes
- * RET0: status
- * RET1: actual length in bytes
- */
-#define HV_FAST_LDC_COPY 0xec
-
-#define LDC_MEM_READ 1
-#define LDC_MEM_WRITE 2
-#define LDC_MEM_EXEC 4
-
-/* ldc_mapin()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_MAPIN
- * ARG0: channel ID
- * ARG1: cookie
- * RET0: status
- * RET1: real address
- * RET2: LDC_MEM_* permissions
- */
-#define HV_FAST_LDC_MAPIN 0xed
-
-/* ldc_unmap()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_UNMAP
- * ARG0: real address
- * RET0: status
- */
-#define HV_FAST_LDC_UNMAP 0xee
-
-/* ldc_revoke()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_LDC_REVOKE
- * ARG0: channel ID
- * ARG1: cookie
- * ARG2: ldc_mtable_entry cookie
- * RET0: status
- */
-#define HV_FAST_LDC_REVOKE 0xef
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
- unsigned long ra,
- unsigned long num_entries);
-extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
- unsigned long *ra,
- unsigned long *num_entries);
-extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
- unsigned long *head_off,
- unsigned long *tail_off,
- unsigned long *chan_state);
-extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
- unsigned long tail_off);
-extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
- unsigned long ra,
- unsigned long num_entries);
-extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
- unsigned long *ra,
- unsigned long *num_entries);
-extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
- unsigned long *head_off,
- unsigned long *tail_off,
- unsigned long *chan_state);
-extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
- unsigned long head_off);
-extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
- unsigned long ra,
- unsigned long num_entries);
-extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
- unsigned long *ra,
- unsigned long *num_entries);
-extern unsigned long sun4v_ldc_copy(unsigned long channel,
- unsigned long dir_code,
- unsigned long tgt_raddr,
- unsigned long lcl_raddr,
- unsigned long len,
- unsigned long *actual_len);
-extern unsigned long sun4v_ldc_mapin(unsigned long channel,
- unsigned long cookie,
- unsigned long *ra,
- unsigned long *perm);
-extern unsigned long sun4v_ldc_unmap(unsigned long ra);
-extern unsigned long sun4v_ldc_revoke(unsigned long channel,
- unsigned long cookie,
- unsigned long mte_cookie);
-#endif
-
-/* Performance counter services. */
-
-#define HV_PERF_JBUS_PERF_CTRL_REG 0x00
-#define HV_PERF_JBUS_PERF_CNT_REG 0x01
-#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02
-#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03
-#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04
-#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05
-#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06
-#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07
-#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08
-#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09
-
-/* get_perfreg()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_GET_PERFREG
- * ARG0: performance reg number
- * RET0: status
- * RET1: performance reg value
- * ERRORS: EINVAL Invalid performance register number
- * ENOACCESS No access allowed to performance counters
- *
- * Read the value of the given DRAM/JBUS performance counter/control register.
- */
-#define HV_FAST_GET_PERFREG 0x100
-
-/* set_perfreg()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_SET_PERFREG
- * ARG0: performance reg number
- * ARG1: performance reg value
- * RET0: status
- * ERRORS: EINVAL Invalid performance register number
- * ENOACCESS No access allowed to performance counters
- *
- * Write the given performance reg value to the given DRAM/JBUS
- * performance counter/control register.
- */
-#define HV_FAST_SET_PERFREG 0x101
-
-/* MMU statistics services.
- *
- * The hypervisor maintains MMU statistics and privileged code provides
- * a buffer where these statistics can be collected. It is continually
- * updated once configured. The layout is as follows:
- */
-#ifndef __ASSEMBLY__
-struct hv_mmu_statistics {
- unsigned long immu_tsb_hits_ctx0_8k_tte;
- unsigned long immu_tsb_ticks_ctx0_8k_tte;
- unsigned long immu_tsb_hits_ctx0_64k_tte;
- unsigned long immu_tsb_ticks_ctx0_64k_tte;
- unsigned long __reserved1[2];
- unsigned long immu_tsb_hits_ctx0_4mb_tte;
- unsigned long immu_tsb_ticks_ctx0_4mb_tte;
- unsigned long __reserved2[2];
- unsigned long immu_tsb_hits_ctx0_256mb_tte;
- unsigned long immu_tsb_ticks_ctx0_256mb_tte;
- unsigned long __reserved3[4];
- unsigned long immu_tsb_hits_ctxnon0_8k_tte;
- unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
- unsigned long immu_tsb_hits_ctxnon0_64k_tte;
- unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
- unsigned long __reserved4[2];
- unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
- unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
- unsigned long __reserved5[2];
- unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
- unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
- unsigned long __reserved6[4];
- unsigned long dmmu_tsb_hits_ctx0_8k_tte;
- unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
- unsigned long dmmu_tsb_hits_ctx0_64k_tte;
- unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
- unsigned long __reserved7[2];
- unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
- unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
- unsigned long __reserved8[2];
- unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
- unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
- unsigned long __reserved9[4];
- unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
- unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
- unsigned long __reserved10[2];
- unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
- unsigned long __reserved11[2];
- unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
- unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
- unsigned long __reserved12[4];
-};
-#endif
-
-/* mmustat_conf()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMUSTAT_CONF
- * ARG0: real address
- * RET0: status
- * RET1: real address
- * ERRORS: ENORADDR Invalid real address
- * EBADALIGN Real address not aligned on 64-byte boundary
- * EBADTRAP API not supported on this processor
- *
- * Enable MMU statistic gathering using the buffer at the given real
- * address on the current virtual CPU. The new buffer real address
- * is given in ARG1, and the previously specified buffer real address
- * is returned in RET1, or is returned as zero for the first invocation.
- *
- * If the passed in real address argument is zero, this will disable
- * MMU statistic collection on the current virtual CPU. If an error is
- * returned then no statistics are collected.
- *
- * The buffer contents should be initialized to all zeros before being
- * given to the hypervisor or else the statistics will be meaningless.
- */
-#define HV_FAST_MMUSTAT_CONF 0x102
-
-/* mmustat_info()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MMUSTAT_INFO
- * RET0: status
- * RET1: real address
- * ERRORS: EBADTRAP API not supported on this processor
- *
- * Return the current state and real address of the currently configured
- * MMU statistics buffer on the current virtual CPU.
- */
-#define HV_FAST_MMUSTAT_INFO 0x103
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra);
-extern unsigned long sun4v_mmustat_info(unsigned long *ra);
-#endif
-
-/* NCS crypto services */
-
-/* ncs_request() sub-function numbers */
-#define HV_NCS_QCONF 0x01
-#define HV_NCS_QTAIL_UPDATE 0x02
-
-#ifndef __ASSEMBLY__
-struct hv_ncs_queue_entry {
- /* MAU Control Register */
- unsigned long mau_control;
-#define MAU_CONTROL_INV_PARITY 0x0000000000002000
-#define MAU_CONTROL_STRAND 0x0000000000001800
-#define MAU_CONTROL_BUSY 0x0000000000000400
-#define MAU_CONTROL_INT 0x0000000000000200
-#define MAU_CONTROL_OP 0x00000000000001c0
-#define MAU_CONTROL_OP_SHIFT 6
-#define MAU_OP_LOAD_MA_MEMORY 0x0
-#define MAU_OP_STORE_MA_MEMORY 0x1
-#define MAU_OP_MODULAR_MULT 0x2
-#define MAU_OP_MODULAR_REDUCE 0x3
-#define MAU_OP_MODULAR_EXP_LOOP 0x4
-#define MAU_CONTROL_LEN 0x000000000000003f
-#define MAU_CONTROL_LEN_SHIFT 0
-
- /* Real address of bytes to load or store bytes
- * into/out-of the MAU.
- */
- unsigned long mau_mpa;
-
- /* Modular Arithmetic MA Offset Register. */
- unsigned long mau_ma;
-
- /* Modular Arithmetic N Prime Register. */
- unsigned long mau_np;
-};
-
-struct hv_ncs_qconf_arg {
- unsigned long mid; /* MAU ID, 1 per core on Niagara */
- unsigned long base; /* Real address base of queue */
- unsigned long end; /* Real address end of queue */
- unsigned long num_ents; /* Number of entries in queue */
-};
-
-struct hv_ncs_qtail_update_arg {
- unsigned long mid; /* MAU ID, 1 per core on Niagara */
- unsigned long tail; /* New tail index to use */
- unsigned long syncflag; /* only SYNCFLAG_SYNC is implemented */
-#define HV_NCS_SYNCFLAG_SYNC 0x00
-#define HV_NCS_SYNCFLAG_ASYNC 0x01
-};
-#endif
-
-/* ncs_request()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_NCS_REQUEST
- * ARG0: NCS sub-function
- * ARG1: sub-function argument real address
- * ARG2: size in bytes of sub-function argument
- * RET0: status
- *
- * The MAU chip of the Niagara processor is not directly accessible
- * to privileged code, instead it is programmed indirectly via this
- * hypervisor API.
- *
- * The interfaces defines a queue of MAU operations to perform.
- * Privileged code registers a queue with the hypervisor by invoking
- * this HVAPI with the HV_NCS_QCONF sub-function, which defines the
- * base, end, and number of entries of the queue. Each queue entry
- * contains a MAU register struct block.
- *
- * The privileged code then proceeds to add entries to the queue and
- * then invoke the HV_NCS_QTAIL_UPDATE sub-function. Since only
- * synchronous operations are supported by the current hypervisor,
- * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to
- * completion and return HV_EOK, or return an error code.
- *
- * The real address of the sub-function argument must be aligned on at
- * least an 8-byte boundary.
- *
- * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte
- * offset, into the queue and must be less than or equal the 'num_ents'
- * argument given in the HV_NCS_QCONF call.
- */
-#define HV_FAST_NCS_REQUEST 0x110
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_ncs_request(unsigned long request,
- unsigned long arg_ra,
- unsigned long arg_size);
-#endif
-
-#define HV_FAST_FIRE_GET_PERFREG 0x120
-#define HV_FAST_FIRE_SET_PERFREG 0x121
-
-/* Function numbers for HV_CORE_TRAP. */
-#define HV_CORE_SET_VER 0x00
-#define HV_CORE_PUTCHAR 0x01
-#define HV_CORE_EXIT 0x02
-#define HV_CORE_GET_VER 0x03
-
-/* Hypervisor API groups for use with HV_CORE_SET_VER and
- * HV_CORE_GET_VER.
- */
-#define HV_GRP_SUN4V 0x0000
-#define HV_GRP_CORE 0x0001
-#define HV_GRP_INTR 0x0002
-#define HV_GRP_SOFT_STATE 0x0003
-#define HV_GRP_PCI 0x0100
-#define HV_GRP_LDOM 0x0101
-#define HV_GRP_SVC_CHAN 0x0102
-#define HV_GRP_NCS 0x0103
-#define HV_GRP_NIAG_PERF 0x0200
-#define HV_GRP_FIRE_PERF 0x0201
-#define HV_GRP_DIAG 0x0300
-
-#ifndef __ASSEMBLY__
-extern unsigned long sun4v_get_version(unsigned long group,
- unsigned long *major,
- unsigned long *minor);
-extern unsigned long sun4v_set_version(unsigned long group,
- unsigned long major,
- unsigned long minor,
- unsigned long *actual_minor);
-
-extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
- unsigned long *minor);
-extern void sun4v_hvapi_unregister(unsigned long group);
-extern int sun4v_hvapi_get(unsigned long group,
- unsigned long *major,
- unsigned long *minor);
-extern void sun4v_hvapi_init(void);
-#endif
-
-#endif /* !(_SPARC64_HYPERVISOR_H) */
+#include <asm-sparc/hypervisor.h>
OpenPOWER on IntegriCloud