diff options
Diffstat (limited to 'include/asm-arm/plat-s3c')
| -rw-r--r-- | include/asm-arm/plat-s3c/debug-macro.S | 75 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c/regs-serial.h | 232 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c/regs-timer.h | 115 | ||||
| -rw-r--r-- | include/asm-arm/plat-s3c/uncompress.h | 2 |
4 files changed, 1 insertions, 423 deletions
diff --git a/include/asm-arm/plat-s3c/debug-macro.S b/include/asm-arm/plat-s3c/debug-macro.S deleted file mode 100644 index 84c40b847da8..000000000000 --- a/include/asm-arm/plat-s3c/debug-macro.S +++ /dev/null @@ -1,75 +0,0 @@ -/* linux/include/asm-arm/plat-s3c/debug-macro.S - * - * Copyright 2005, 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <asm/plat-s3c/regs-serial.h> - -/* The S3C2440 implementations are used by default as they are the - * most widely re-used */ - - .macro fifo_level_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - and \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - -#ifndef fifo_level -#define fifo_level fifo_level_s3c2410 -#endif - - .macro fifo_full_s3c2440 rd, rx - ldr \rd, [ \rx, # S3C2410_UFSTAT ] - tst \rd, #S3C2440_UFSTAT_TXFULL - .endm - -#ifndef fifo_full -#define fifo_full fifo_full_s3c2440 -#endif - - .macro senduart,rd,rx - strb \rd, [\rx, # S3C2410_UTXH ] - .endm - - .macro busyuart, rd, rx - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_full \rd, \rx - bne 1003b - b 1002f - -1001: - @ busy waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm - - .macro waituart,rd,rx - ldr \rd, [ \rx, # S3C2410_UFCON ] - tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? - beq 1001f @ - @ FIFO enabled... -1003: - fifo_level \rd, \rx - teq \rd, #0 - bne 1003b - b 1002f -1001: - @ idle waiting for non fifo - ldr \rd, [ \rx, # S3C2410_UTRSTAT ] - tst \rd, #S3C2410_UTRSTAT_TXFE - beq 1001b - -1002: @ exit busyuart - .endm diff --git a/include/asm-arm/plat-s3c/regs-serial.h b/include/asm-arm/plat-s3c/regs-serial.h deleted file mode 100644 index a0daa647b92c..000000000000 --- a/include/asm-arm/plat-s3c/regs-serial.h +++ /dev/null @@ -1,232 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-serial.h - * - * From linux/include/asm-arm/hardware/serial_s3c2410.h - * - * Internal header file for Samsung S3C2410 serial ports (UART0-2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk) - * - * Adapted from: - * - * Internal header file for MX1ADS serial ports (UART1 & 2) - * - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef __ASM_ARM_REGS_SERIAL_H -#define __ASM_ARM_REGS_SERIAL_H - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -#define S3C2410_PA_UART0 (S3C24XX_PA_UART) -#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 ) -#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 ) -#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 ) - -#define S3C2410_URXH (0x24) -#define S3C2410_UTXH (0x20) -#define S3C2410_ULCON (0x00) -#define S3C2410_UCON (0x04) -#define S3C2410_UFCON (0x08) -#define S3C2410_UMCON (0x0C) -#define S3C2410_UBRDIV (0x28) -#define S3C2410_UTRSTAT (0x10) -#define S3C2410_UERSTAT (0x14) -#define S3C2410_UFSTAT (0x18) -#define S3C2410_UMSTAT (0x1C) - -#define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) - -#define S3C2410_LCON_CS5 (0x0) -#define S3C2410_LCON_CS6 (0x1) -#define S3C2410_LCON_CS7 (0x2) -#define S3C2410_LCON_CS8 (0x3) -#define S3C2410_LCON_CSMASK (0x3) - -#define S3C2410_LCON_PNONE (0x0) -#define S3C2410_LCON_PEVEN (0x5 << 3) -#define S3C2410_LCON_PODD (0x4 << 3) -#define S3C2410_LCON_PMASK (0x7 << 3) - -#define S3C2410_LCON_STOPB (1<<2) -#define S3C2410_LCON_IRM (1<<6) - -#define S3C2440_UCON_CLKMASK (3<<10) -#define S3C2440_UCON_PCLK (0<<10) -#define S3C2440_UCON_UCLK (1<<10) -#define S3C2440_UCON_PCLK2 (2<<10) -#define S3C2440_UCON_FCLK (3<<10) -#define S3C2443_UCON_EPLL (3<<10) - -#define S3C2440_UCON2_FCLK_EN (1<<15) -#define S3C2440_UCON0_DIVMASK (15 << 12) -#define S3C2440_UCON1_DIVMASK (15 << 12) -#define S3C2440_UCON2_DIVMASK (7 << 12) -#define S3C2440_UCON_DIVSHIFT (12) - -#define S3C2412_UCON_CLKMASK (3<<10) -#define S3C2412_UCON_UCLK (1<<10) -#define S3C2412_UCON_USYSCLK (3<<10) -#define S3C2412_UCON_PCLK (0<<10) -#define S3C2412_UCON_PCLK2 (2<<10) - -#define S3C2410_UCON_UCLK (1<<10) -#define S3C2410_UCON_SBREAK (1<<4) - -#define S3C2410_UCON_TXILEVEL (1<<9) -#define S3C2410_UCON_RXILEVEL (1<<8) -#define S3C2410_UCON_TXIRQMODE (1<<2) -#define S3C2410_UCON_RXIRQMODE (1<<0) -#define S3C2410_UCON_RXFIFO_TOI (1<<7) -#define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) - -#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI) - -#define S3C2410_UFCON_FIFOMODE (1<<0) -#define S3C2410_UFCON_TXTRIG0 (0<<6) -#define S3C2410_UFCON_RXTRIG8 (1<<4) -#define S3C2410_UFCON_RXTRIG12 (2<<4) - -/* S3C2440 FIFO trigger levels */ -#define S3C2440_UFCON_RXTRIG1 (0<<4) -#define S3C2440_UFCON_RXTRIG8 (1<<4) -#define S3C2440_UFCON_RXTRIG16 (2<<4) -#define S3C2440_UFCON_RXTRIG32 (3<<4) - -#define S3C2440_UFCON_TXTRIG0 (0<<6) -#define S3C2440_UFCON_TXTRIG16 (1<<6) -#define S3C2440_UFCON_TXTRIG32 (2<<6) -#define S3C2440_UFCON_TXTRIG48 (3<<6) - -#define S3C2410_UFCON_RESETBOTH (3<<1) -#define S3C2410_UFCON_RESETTX (1<<2) -#define S3C2410_UFCON_RESETRX (1<<1) - -#define S3C2410_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S3C2410_UFCON_TXTRIG0 | \ - S3C2410_UFCON_RXTRIG8 ) - -#define S3C2410_UMCOM_AFC (1<<4) -#define S3C2410_UMCOM_RTS_LOW (1<<0) - -#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */ -#define S3C2412_UMCON_AFC_56 (1<<5) -#define S3C2412_UMCON_AFC_48 (2<<5) -#define S3C2412_UMCON_AFC_40 (3<<5) -#define S3C2412_UMCON_AFC_32 (4<<5) -#define S3C2412_UMCON_AFC_24 (5<<5) -#define S3C2412_UMCON_AFC_16 (6<<5) -#define S3C2412_UMCON_AFC_8 (7<<5) - -#define S3C2410_UFSTAT_TXFULL (1<<9) -#define S3C2410_UFSTAT_RXFULL (1<<8) -#define S3C2410_UFSTAT_TXMASK (15<<4) -#define S3C2410_UFSTAT_TXSHIFT (4) -#define S3C2410_UFSTAT_RXMASK (15<<0) -#define S3C2410_UFSTAT_RXSHIFT (0) - -/* UFSTAT S3C2443 same as S3C2440 */ -#define S3C2440_UFSTAT_TXFULL (1<<14) -#define S3C2440_UFSTAT_RXFULL (1<<6) -#define S3C2440_UFSTAT_TXSHIFT (8) -#define S3C2440_UFSTAT_RXSHIFT (0) -#define S3C2440_UFSTAT_TXMASK (63<<8) -#define S3C2440_UFSTAT_RXMASK (63) - -#define S3C2410_UTRSTAT_TXE (1<<2) -#define S3C2410_UTRSTAT_TXFE (1<<1) -#define S3C2410_UTRSTAT_RXDR (1<<0) - -#define S3C2410_UERSTAT_OVERRUN (1<<0) -#define S3C2410_UERSTAT_FRAME (1<<2) -#define S3C2410_UERSTAT_BREAK (1<<3) -#define S3C2443_UERSTAT_PARITY (1<<1) - -#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \ - S3C2410_UERSTAT_FRAME | \ - S3C2410_UERSTAT_BREAK) - -#define S3C2410_UMSTAT_CTS (1<<0) -#define S3C2410_UMSTAT_DeltaCTS (1<<2) - -#define S3C2443_DIVSLOT (0x2C) - -#ifndef __ASSEMBLY__ - -/* struct s3c24xx_uart_clksrc - * - * this structure defines a named clock source that can be used for the - * uart, so that the best clock can be selected for the requested baud - * rate. - * - * min_baud and max_baud define the range of baud-rates this clock is - * acceptable for, if they are both zero, it is assumed any baud rate that - * can be generated from this clock will be used. - * - * divisor gives the divisor from the clock to the one seen by the uart -*/ - -struct s3c24xx_uart_clksrc { - const char *name; - unsigned int divisor; - unsigned int min_baud; - unsigned int max_baud; -}; - -/* configuration structure for per-machine configurations for the - * serial port - * - * the pointer is setup by the machine specific initialisation from the - * arch/arm/mach-s3c2410/ directory. -*/ - -struct s3c2410_uartcfg { - unsigned char hwport; /* hardware port number */ - unsigned char unused; - unsigned short flags; - upf_t uart_flags; /* default uart flags */ - - unsigned long ucon; /* value of ucon for port */ - unsigned long ulcon; /* value of ulcon for port */ - unsigned long ufcon; /* value of ufcon for port */ - - struct s3c24xx_uart_clksrc *clocks; - unsigned int clocks_size; -}; - -/* s3c24xx_uart_devs - * - * this is exported from the core as we cannot use driver_register(), - * or platform_add_device() before the console_initcall() -*/ - -extern struct platform_device *s3c24xx_uart_devs[3]; - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARM_REGS_SERIAL_H */ - diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h deleted file mode 100644 index cc0eedd53e38..000000000000 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ /dev/null @@ -1,115 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-timer.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Timer configuration -*/ - - -#ifndef __ASM_ARCH_REGS_TIMER_H -#define __ASM_ARCH_REGS_TIMER_H - -#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) -#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) - -#define S3C2410_TCFG0 S3C_TIMERREG(0x00) -#define S3C2410_TCFG1 S3C_TIMERREG(0x04) -#define S3C2410_TCON S3C_TIMERREG(0x08) - -#define S3C2410_TCFG_PRESCALER0_MASK (255<<0) -#define S3C2410_TCFG_PRESCALER1_MASK (255<<8) -#define S3C2410_TCFG_PRESCALER1_SHIFT (8) -#define S3C2410_TCFG_DEADZONE_MASK (255<<16) -#define S3C2410_TCFG_DEADZONE_SHIFT (16) - -#define S3C2410_TCFG1_MUX4_DIV2 (0<<16) -#define S3C2410_TCFG1_MUX4_DIV4 (1<<16) -#define S3C2410_TCFG1_MUX4_DIV8 (2<<16) -#define S3C2410_TCFG1_MUX4_DIV16 (3<<16) -#define S3C2410_TCFG1_MUX4_TCLK1 (4<<16) -#define S3C2410_TCFG1_MUX4_MASK (15<<16) -#define S3C2410_TCFG1_MUX4_SHIFT (16) - -#define S3C2410_TCFG1_MUX3_DIV2 (0<<12) -#define S3C2410_TCFG1_MUX3_DIV4 (1<<12) -#define S3C2410_TCFG1_MUX3_DIV8 (2<<12) -#define S3C2410_TCFG1_MUX3_DIV16 (3<<12) -#define S3C2410_TCFG1_MUX3_TCLK1 (4<<12) -#define S3C2410_TCFG1_MUX3_MASK (15<<12) - - -#define S3C2410_TCFG1_MUX2_DIV2 (0<<8) -#define S3C2410_TCFG1_MUX2_DIV4 (1<<8) -#define S3C2410_TCFG1_MUX2_DIV8 (2<<8) -#define S3C2410_TCFG1_MUX2_DIV16 (3<<8) -#define S3C2410_TCFG1_MUX2_TCLK1 (4<<8) -#define S3C2410_TCFG1_MUX2_MASK (15<<8) - - -#define S3C2410_TCFG1_MUX1_DIV2 (0<<4) -#define S3C2410_TCFG1_MUX1_DIV4 (1<<4) -#define S3C2410_TCFG1_MUX1_DIV8 (2<<4) -#define S3C2410_TCFG1_MUX1_DIV16 (3<<4) -#define S3C2410_TCFG1_MUX1_TCLK0 (4<<4) -#define S3C2410_TCFG1_MUX1_MASK (15<<4) - -#define S3C2410_TCFG1_MUX0_DIV2 (0<<0) -#define S3C2410_TCFG1_MUX0_DIV4 (1<<0) -#define S3C2410_TCFG1_MUX0_DIV8 (2<<0) -#define S3C2410_TCFG1_MUX0_DIV16 (3<<0) -#define S3C2410_TCFG1_MUX0_TCLK0 (4<<0) -#define S3C2410_TCFG1_MUX0_MASK (15<<0) - -#define S3C2410_TCFG1_MUX_DIV2 (0<<0) -#define S3C2410_TCFG1_MUX_DIV4 (1<<0) -#define S3C2410_TCFG1_MUX_DIV8 (2<<0) -#define S3C2410_TCFG1_MUX_DIV16 (3<<0) -#define S3C2410_TCFG1_MUX_TCLK (4<<0) -#define S3C2410_TCFG1_MUX_MASK (15<<0) - -#define S3C2410_TCFG1_SHIFT(x) ((x) * 4) - -/* for each timer, we have an count buffer, an compare buffer and - * an observation buffer -*/ - -/* WARNING - timer 4 has no buffer reg, and it's observation is at +4 */ - -#define S3C2410_TCNTB(tmr) S3C_TIMERREG2(tmr, 0x00) -#define S3C2410_TCMPB(tmr) S3C_TIMERREG2(tmr, 0x04) -#define S3C2410_TCNTO(tmr) S3C_TIMERREG2(tmr, (((tmr) == 4) ? 0x04 : 0x08)) - -#define S3C2410_TCON_T4RELOAD (1<<22) -#define S3C2410_TCON_T4MANUALUPD (1<<21) -#define S3C2410_TCON_T4START (1<<20) - -#define S3C2410_TCON_T3RELOAD (1<<19) -#define S3C2410_TCON_T3INVERT (1<<18) -#define S3C2410_TCON_T3MANUALUPD (1<<17) -#define S3C2410_TCON_T3START (1<<16) - -#define S3C2410_TCON_T2RELOAD (1<<15) -#define S3C2410_TCON_T2INVERT (1<<14) -#define S3C2410_TCON_T2MANUALUPD (1<<13) -#define S3C2410_TCON_T2START (1<<12) - -#define S3C2410_TCON_T1RELOAD (1<<11) -#define S3C2410_TCON_T1INVERT (1<<10) -#define S3C2410_TCON_T1MANUALUPD (1<<9) -#define S3C2410_TCON_T1START (1<<8) - -#define S3C2410_TCON_T0DEADZONE (1<<4) -#define S3C2410_TCON_T0RELOAD (1<<3) -#define S3C2410_TCON_T0INVERT (1<<2) -#define S3C2410_TCON_T0MANUALUPD (1<<1) -#define S3C2410_TCON_T0START (1<<0) - -#endif /* __ASM_ARCH_REGS_TIMER_H */ - - - diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h index 19b9eda39485..4df006b9cc10 100644 --- a/include/asm-arm/plat-s3c/uncompress.h +++ b/include/asm-arm/plat-s3c/uncompress.h @@ -27,7 +27,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ -#include <asm/plat-s3c/regs-serial.h> +#include <plat/regs-serial.h> #include <asm/plat-s3c/regs-watchdog.h> /* working in physical space... */ |
