diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/atm/firestream.c | 2 | ||||
-rw-r--r-- | drivers/block/smart1,2.h | 2 | ||||
-rw-r--r-- | drivers/bluetooth/btusb.c | 4 | ||||
-rw-r--r-- | drivers/cpuidle/sysfs.c | 2 | ||||
-rw-r--r-- | drivers/dma/shdma.c | 2 | ||||
-rw-r--r-- | drivers/edac/i7300_edac.c | 2 | ||||
-rw-r--r-- | drivers/edac/i82975x_edac.c | 2 | ||||
-rw-r--r-- | drivers/gpu/drm/drm_sman.c | 4 | ||||
-rw-r--r-- | drivers/message/i2o/i2o_config.c | 3 | ||||
-rw-r--r-- | drivers/net/atl1c/atl1c.h | 4 | ||||
-rw-r--r-- | drivers/net/sungem.h | 2 | ||||
-rw-r--r-- | drivers/net/wireless/ipw2x00/ipw2100.c | 2 | ||||
-rw-r--r-- | drivers/platform/x86/acer-wmi.c | 1 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx.h | 2 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx/aic7xxx.h | 2 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx/aic7xxx_core.c | 2 | ||||
-rw-r--r-- | drivers/scsi/megaraid.c | 4 | ||||
-rw-r--r-- | drivers/scsi/megaraid/megaraid_sas_base.c | 2 | ||||
-rw-r--r-- | drivers/scsi/osst.c | 10 | ||||
-rw-r--r-- | drivers/usb/wusbcore/rh.c | 2 |
20 files changed, 25 insertions, 31 deletions
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 7d912baf01d4..049650d42c88 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1031,7 +1031,7 @@ static int fs_open(struct atm_vcc *atm_vcc) /* We now use the "submit_command" function to submit commands to the firestream. There is a define up near the definition of that routine that switches this routine between immediate write - to the immediate comamnd registers and queuing the commands in + to the immediate command registers and queuing the commands in the HPTXQ for execution. This last technique might be more efficient if we know we're going to submit a whole lot of commands in one go, but this driver is not setup to be able to diff --git a/drivers/block/smart1,2.h b/drivers/block/smart1,2.h index a0b403a6b4ed..e5565fbaeb30 100644 --- a/drivers/block/smart1,2.h +++ b/drivers/block/smart1,2.h @@ -95,7 +95,7 @@ static unsigned long smart4_completed(ctlr_info_t *h) /* * This hardware returns interrupt pending at a different place and * it does not tell us if the fifo is empty, we will have check - * that by getting a 0 back from the comamnd_completed call. + * that by getting a 0 back from the command_completed call. */ static unsigned long smart4_intr_pending(ctlr_info_t *h) { diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 1da773f899a2..92d29bfa2f48 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -424,7 +424,7 @@ static void btusb_isoc_complete(struct urb *urb) } } -static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu) +static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu) { int i, offset = 0; @@ -775,7 +775,7 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt) } } -static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting) +static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting) { struct btusb_data *data = hdev->driver_data; struct usb_interface *intf = data->isoc; diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index 0310ffaec9df..be7917ec40c9 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -300,7 +300,7 @@ static struct kobj_type ktype_state_cpuidle = { .release = cpuidle_state_sysfs_release, }; -static void inline cpuidle_free_state_kobj(struct cpuidle_device *device, int i) +static inline void cpuidle_free_state_kobj(struct cpuidle_device *device, int i) { kobject_put(&device->kobjs[i]->kobj); wait_for_completion(&device->kobjs[i]->kobj_unregister); diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 28720d3103c4..6451b581a70b 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -750,7 +750,7 @@ static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan) return; } - /* Find the first not transferred desciptor */ + /* Find the first not transferred descriptor */ list_for_each_entry(desc, &sh_chan->ld_queue, node) if (desc->mark == DESC_SUBMITTED) { dev_dbg(sh_chan->dev, "Queue #%d to %d: %u@%x -> %x\n", diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c index 05523b504271..76d1f576cdc8 100644 --- a/drivers/edac/i7300_edac.c +++ b/drivers/edac/i7300_edac.c @@ -162,7 +162,7 @@ static struct edac_pci_ctl_info *i7300_pci; #define AMBPRESENT_0 0x64 #define AMBPRESENT_1 0x66 -const static u16 mtr_regs[MAX_SLOTS] = { +static const u16 mtr_regs[MAX_SLOTS] = { 0x80, 0x84, 0x88, 0x8c, 0x82, 0x86, 0x8a, 0x8e }; diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c index 3218819b7286..5e3acb4eecc9 100644 --- a/drivers/edac/i82975x_edac.c +++ b/drivers/edac/i82975x_edac.c @@ -664,7 +664,7 @@ module_init(i82975x_init); module_exit(i82975x_exit); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Arvind R. <arvind@acarlab.com>"); +MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>"); MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers"); module_param(edac_op_state, int, 0444); diff --git a/drivers/gpu/drm/drm_sman.c b/drivers/gpu/drm/drm_sman.c index 463aed9403db..34664587a74e 100644 --- a/drivers/gpu/drm/drm_sman.c +++ b/drivers/gpu/drm/drm_sman.c @@ -59,9 +59,7 @@ drm_sman_init(struct drm_sman * sman, unsigned int num_managers, { int ret = 0; - sman->mm = (struct drm_sman_mm *) kcalloc(num_managers, - sizeof(*sman->mm), - GFP_KERNEL); + sman->mm = kcalloc(num_managers, sizeof(*sman->mm), GFP_KERNEL); if (!sman->mm) { ret = -ENOMEM; goto out; diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index 7d3cc575c361..098de2b35784 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -1044,8 +1044,7 @@ static long i2o_cfg_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) static int cfg_open(struct inode *inode, struct file *file) { - struct i2o_cfg_info *tmp = - (struct i2o_cfg_info *)kmalloc(sizeof(struct i2o_cfg_info), + struct i2o_cfg_info *tmp = kmalloc(sizeof(struct i2o_cfg_info), GFP_KERNEL); unsigned long flags; diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h index 9ab58097fa2e..7cb375e0e29c 100644 --- a/drivers/net/atl1c/atl1c.h +++ b/drivers/net/atl1c/atl1c.h @@ -265,7 +265,7 @@ struct atl1c_recv_ret_status { __le32 word3; }; -/* RFD desciptor */ +/* RFD descriptor */ struct atl1c_rx_free_desc { __le64 buffer_addr; }; @@ -531,7 +531,7 @@ struct atl1c_rfd_ring { struct atl1c_buffer *buffer_info; }; -/* receive return desciptor (rrd) ring */ +/* receive return descriptor (rrd) ring */ struct atl1c_rrd_ring { void *desc; /* descriptor ring virtual address */ dma_addr_t dma; /* descriptor ring physical address */ diff --git a/drivers/net/sungem.h b/drivers/net/sungem.h index 19905460def6..bfb6683a1443 100644 --- a/drivers/net/sungem.h +++ b/drivers/net/sungem.h @@ -843,7 +843,7 @@ struct gem_txd { /* GEM requires that RX descriptors are provided four at a time, * aligned. Also, the RX ring may not wrap around. This means that - * there will be at least 4 unused desciptor entries in the middle + * there will be at least 4 unused descriptor entries in the middle * of the RX ring at all times. * * Similar to HME, GEM assumes that it can write garbage bytes before diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 61915f371416..da60faee74fc 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1397,7 +1397,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) } /* - * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it + * Send the CARD_DISABLE_PHY_OFF command to the card to disable it * * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent. * diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index c5c4b8c32eb8..f21eb5326607 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -39,7 +39,6 @@ #include <linux/slab.h> #include <linux/input.h> #include <linux/input/sparse-keymap.h> -#include <linux/dmi.h> #include <acpi/acpi_drivers.h> diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h index be5558ab84ea..95ee50385188 100644 --- a/drivers/scsi/aic7xxx/aic79xx.h +++ b/drivers/scsi/aic7xxx/aic79xx.h @@ -672,7 +672,7 @@ struct scb_data { /************************ Target Mode Definitions *****************************/ /* - * Connection desciptor for select-in requests in target mode. + * Connection descriptor for select-in requests in target mode. */ struct target_cmd { uint8_t scsiid; /* Our ID and the initiator's ID */ diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h index e4e651cca3e4..17444bc18bca 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.h +++ b/drivers/scsi/aic7xxx/aic7xxx.h @@ -618,7 +618,7 @@ struct scb_data { /************************ Target Mode Definitions *****************************/ /* - * Connection desciptor for select-in requests in target mode. + * Connection descriptor for select-in requests in target mode. */ struct target_cmd { uint8_t scsiid; /* Our ID and the initiator's ID */ diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index 3f5a542a7793..e021b4812d58 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -4780,7 +4780,7 @@ ahc_init_scbdata(struct ahc_softc *ahc) SLIST_INIT(&scb_data->sg_maps); /* Allocate SCB resources */ - scb_data->scbarray = (struct scb *)kmalloc(sizeof(struct scb) * AHC_SCB_MAX_ALLOC, GFP_ATOMIC); + scb_data->scbarray = kmalloc(sizeof(struct scb) * AHC_SCB_MAX_ALLOC, GFP_ATOMIC); if (scb_data->scbarray == NULL) return (ENOMEM); memset(scb_data->scbarray, 0, sizeof(struct scb) * AHC_SCB_MAX_ALLOC); diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 9aa048525eb2..c212694a9714 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -1412,7 +1412,7 @@ megaraid_isr_memmapped(int irq, void *devp) * @nstatus - number of completed commands * @status - status of the last command completed * - * Complete the comamnds and call the scsi mid-layer callback hooks. + * Complete the commands and call the scsi mid-layer callback hooks. */ static void mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status) @@ -4296,7 +4296,7 @@ mega_support_cluster(adapter_t *adapter) * @adapter - pointer to our soft state * @dma_handle - DMA address of the buffer * - * Issue internal comamnds while interrupts are available. + * Issue internal commands while interrupts are available. * We only issue direct mailbox commands from within the driver. ioctl() * interface using these routines can issue passthru commands. */ diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 5d6d07bd1cd0..a18ba43af73e 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -877,7 +877,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance, * @instance: Adapter soft state * @cmd_to_abort: Previously issued cmd to be aborted * - * MFI firmware can abort previously issued AEN comamnd (automatic event + * MFI firmware can abort previously issued AEN command (automatic event * notification). The megasas_issue_blocked_abort_cmd() issues such abort * cmd and waits for return status. * Max wait time is MEGASAS_INTERNAL_CMD_WAIT_TIME secs diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 54de1d1af1a7..521e2182d45b 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -1484,7 +1484,7 @@ static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst int dbg = debugging; #endif - if ((buffer = (unsigned char *)vmalloc((nframes + 1) * OS_DATA_SIZE)) == NULL) + if ((buffer = vmalloc((nframes + 1) * OS_DATA_SIZE)) == NULL) return (-EIO); printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n", @@ -2296,7 +2296,7 @@ static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRp if (STp->raw) return 0; if (STp->header_cache == NULL) { - if ((STp->header_cache = (os_header_t *)vmalloc(sizeof(os_header_t))) == NULL) { + if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); return (-ENOMEM); } @@ -2484,7 +2484,7 @@ static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** name, ppos, update_frame_cntr); #endif if (STp->header_cache == NULL) { - if ((STp->header_cache = (os_header_t *)vmalloc(sizeof(os_header_t))) == NULL) { + if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) { printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name); return 0; } @@ -5851,9 +5851,7 @@ static int osst_probe(struct device *dev) /* if this is the first attach, build the infrastructure */ write_lock(&os_scsi_tapes_lock); if (os_scsi_tapes == NULL) { - os_scsi_tapes = - (struct osst_tape **)kmalloc(osst_max_dev * sizeof(struct osst_tape *), - GFP_ATOMIC); + os_scsi_tapes = kmalloc(osst_max_dev * sizeof(struct osst_tape *), GFP_ATOMIC); if (os_scsi_tapes == NULL) { write_unlock(&os_scsi_tapes_lock); printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n"); diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index a68ad7aa0b59..785772e66ed0 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -156,7 +156,7 @@ int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); /* - * Return the hub's desciptor + * Return the hub's descriptor * * NOTE: almost cut and paste from ehci-hub.c * |