614 files changed, 26199 insertions, 78779 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 050323fd79e9..7916f4b86d23 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -24,8 +24,6 @@ source "drivers/scsi/Kconfig"
 
 source "drivers/ata/Kconfig"
 
-source "drivers/cdrom/Kconfig"
-
 source "drivers/md/Kconfig"
 
 source "drivers/message/fusion/Kconfig"
@@ -54,6 +52,8 @@ source "drivers/spi/Kconfig"
 
 source "drivers/w1/Kconfig"
 
+source "drivers/power/Kconfig"
+
 source "drivers/hwmon/Kconfig"
 
 source "drivers/mfd/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index adad2f3d438a..503d82569449 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_I2O)		+= message/
 obj-$(CONFIG_RTC_LIB)		+= rtc/
 obj-y				+= i2c/
 obj-$(CONFIG_W1)		+= w1/
+obj-$(CONFIG_POWER_SUPPLY)	+= power/
 obj-$(CONFIG_HWMON)		+= hwmon/
 obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_MD)		+= md/
diff --git a/drivers/acorn/block/fd1772.c b/drivers/acorn/block/fd1772.c
index 674bf81c6e66..423ed08fb6f7 100644
--- a/drivers/acorn/block/fd1772.c
+++ b/drivers/acorn/block/fd1772.c
@@ -1246,7 +1246,7 @@ repeat:
 	del_timer(&motor_off_timer);
 
 	ReqCnt = 0;
-	ReqCmd = CURRENT->cmd;
+	ReqCmd = rq_data_dir(CURRENT);
 	ReqBlock = CURRENT->sector;
 	ReqBuffer = CURRENT->buffer;
 	setup_req_params(drive);
diff --git a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c
index 689a4c3542ba..d85520f78e68 100644
--- a/drivers/acorn/block/mfmhd.c
+++ b/drivers/acorn/block/mfmhd.c
@@ -439,7 +439,7 @@ static void mfm_rw_intr(void)
 	   a choice of command end or some data which is ready to be collected */
 	/* I think we have to transfer data while the interrupt line is on and its
 	   not any other type of interrupt */
-	if (CURRENT->cmd == WRITE) {
+	if (rq_data_dir(CURRENT) == WRITE) {
 		extern void hdc63463_writedma(void);
 		if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) {
 			printk("mfm_rw_intr: Apparent DMA write request when no more to DMA\n");
@@ -799,7 +799,7 @@ static void issue_request(unsigned int block, unsigned int nsect,
 	raw_cmd.head = start_head;
 	raw_cmd.cylinder = track / p->heads;
 	raw_cmd.cmdtype = CURRENT->cmd;
-	raw_cmd.cmdcode = CURRENT->cmd == WRITE ? CMD_WD : CMD_RD;
+	raw_cmd.cmdcode = rq_data_dir(CURRENT) == WRITE ? CMD_WD : CMD_RD;
 	raw_cmd.cmddata[0] = dev + 1;	/* DAG: +1 to get US */
 	raw_cmd.cmddata[1] = raw_cmd.head;
 	raw_cmd.cmddata[2] = raw_cmd.cylinder >> 8;
@@ -830,7 +830,7 @@ static void issue_request(unsigned int block, unsigned int nsect,
 	hdc63463_dataleft = nsect * 256;	/* Better way? */
 
 	DBG("mfm%c: %sing: CHS=%d/%d/%d, sectors=%d, buffer=0x%08lx (%p)\n",
-	     raw_cmd.dev + 'a', (CURRENT->cmd == READ) ? "read" : "writ",
+	     raw_cmd.dev + 'a', rq_data_dir(CURRENT) == READ ? "read" : "writ",
 		       raw_cmd.cylinder,
 		       raw_cmd.head,
 	    raw_cmd.sector, nsect, (unsigned long) Copy_buffer, CURRENT);
@@ -917,13 +917,6 @@ static void mfm_request(void)
 
 		DBG("mfm_request: block after offset=%d\n", block);
 
-		if (CURRENT->cmd != READ && CURRENT->cmd != WRITE) {
-			printk("unknown mfm-command %d\n", CURRENT->cmd);
-			end_request(CURRENT, 0);
-			Busy = 0;
-			printk("mfm: continue 4\n");
-			continue;
-		}
 		issue_request(block, nsect, CURRENT);
 
 		break;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index f7de02a6f497..e1ca86dfdd66 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -115,7 +115,6 @@ struct acpi_processor_errata errata __read_mostly;
 
 static int acpi_processor_errata_piix4(struct pci_dev *dev)
 {
-	u8 rev = 0;
 	u8 value1 = 0;
 	u8 value2 = 0;
 
@@ -127,9 +126,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
 	 * Note that 'dev' references the PIIX4 ACPI Controller.
 	 */
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
-	switch (rev) {
+	switch (dev->revision) {
 	case 0:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
 		break;
@@ -147,7 +144,7 @@ static int acpi_processor_errata_piix4(struct pci_dev *dev)
 		break;
 	}
 
-	switch (rev) {
+	switch (dev->revision) {
 
 	case 0:		/* PIIX4 A-step */
 	case 1:		/* PIIX4 B-step */
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4ad8675f5a16..d8046a113c37 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -309,7 +309,7 @@ config PATA_HPT3X2N
 	  If unsure, say N.
 
 config PATA_HPT3X3
-	tristate "HPT 343/363 PATA support (Experimental)"
+	tristate "HPT 343/363 PATA support"
 	depends on PCI
 	help
 	  This option enables support for the HPT 343/363
@@ -317,6 +317,14 @@ config PATA_HPT3X3
 
 	  If unsure, say N.
 
+config PATA_HPT3X3_DMA
+	bool "HPT 343/363 DMA support (Experimental)"
+	depends on PATA_HPT3X3
+	help
+	  This option enables DMA support for the HPT343/363
+	  controllers. Enable with care as there are still some
+	  problems with DMA on this chipset.
+
 config PATA_ISAPNP
 	tristate "ISA Plug and Play PATA support (Experimental)"
 	depends on EXPERIMENTAL && ISAPNP
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ca5229d24d8e..11e4eb9f304e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ahci"
-#define DRV_VERSION	"2.2"
+#define DRV_VERSION	"2.3"
 
 
 enum {
@@ -54,7 +54,7 @@ enum {
 	AHCI_MAX_PORTS		= 32,
 	AHCI_MAX_SG		= 168, /* hardware max is 64K */
 	AHCI_DMA_BOUNDARY	= 0xffffffff,
-	AHCI_USE_CLUSTERING	= 0,
+	AHCI_USE_CLUSTERING	= 1,
 	AHCI_MAX_CMDS		= 32,
 	AHCI_CMD_SZ		= 32,
 	AHCI_CMD_SLOT_SZ	= AHCI_MAX_CMDS * AHCI_CMD_SZ,
@@ -81,6 +81,7 @@ enum {
 	board_ahci_vt8251	= 2,
 	board_ahci_ign_iferr	= 3,
 	board_ahci_sb600	= 4,
+	board_ahci_mv		= 5,
 
 	/* global controller registers */
 	HOST_CAP		= 0x00, /* host capabilities */
@@ -171,6 +172,8 @@ enum {
 	AHCI_FLAG_HONOR_PI		= (1 << 26), /* honor PORTS_IMPL */
 	AHCI_FLAG_IGN_SERR_INTERNAL	= (1 << 27), /* ignore SERR_INTERNAL */
 	AHCI_FLAG_32BIT_ONLY		= (1 << 28), /* force 32bit */
+	AHCI_FLAG_MV_PATA		= (1 << 29), /* PATA port */
+	AHCI_FLAG_NO_MSI		= (1 << 30), /* no PCI MSI */
 
 	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
@@ -228,9 +231,12 @@ static void ahci_thaw(struct ata_port *ap);
 static void ahci_error_handler(struct ata_port *ap);
 static void ahci_vt8251_error_handler(struct ata_port *ap);
 static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+static int ahci_port_resume(struct ata_port *ap);
+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+			       u32 opts);
 #ifdef CONFIG_PM
 static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
-static int ahci_port_resume(struct ata_port *ap);
 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
 static int ahci_pci_device_resume(struct pci_dev *pdev);
 #endif
@@ -327,14 +333,14 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_pi */
 	{
 		.flags		= AHCI_FLAG_COMMON | AHCI_FLAG_HONOR_PI,
 		.pio_mask	= 0x1f, /* pio0-4 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_vt8251 */
@@ -342,14 +348,14 @@ static const struct ata_port_info ahci_port_info[] = {
 		.flags		= AHCI_FLAG_COMMON | ATA_FLAG_HRST_TO_RESUME |
 				  AHCI_FLAG_NO_NCQ,
 		.pio_mask	= 0x1f, /* pio0-4 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
 	},
 	/* board_ahci_ign_iferr */
 	{
 		.flags		= AHCI_FLAG_COMMON | AHCI_FLAG_IGN_IRQ_IF_ERR,
 		.pio_mask	= 0x1f, /* pio0-4 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
 	/* board_ahci_sb600 */
@@ -358,7 +364,19 @@ static const struct ata_port_info ahci_port_info[] = {
 				  AHCI_FLAG_IGN_SERR_INTERNAL |
 				  AHCI_FLAG_32BIT_ONLY,
 		.pio_mask	= 0x1f, /* pio0-4 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
+	/* board_ahci_mv */
+	{
+		.sht		= &ahci_sht,
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+				  ATA_FLAG_SKIP_D2H_BSY | AHCI_FLAG_HONOR_PI |
+				  AHCI_FLAG_NO_NCQ | AHCI_FLAG_NO_MSI |
+				  AHCI_FLAG_MV_PATA,
+		.pio_mask	= 0x1f, /* pio0-4 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
 };
@@ -456,6 +474,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
 	{ PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
 
+	/* Marvell */
+	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -481,11 +502,17 @@ static inline int ahci_nr_ports(u32 cap)
 	return (cap & 0x1f) + 1;
 }
 
-static inline void __iomem *ahci_port_base(struct ata_port *ap)
+static inline void __iomem *__ahci_port_base(struct ata_host *host,
+					     unsigned int port_no)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+
+	return mmio + 0x100 + (port_no * 0x80);
+}
 
-	return mmio + 0x100 + (ap->port_no * 0x80);
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
+{
+	return __ahci_port_base(ap->host, ap->port_no);
 }
 
 /**
@@ -535,6 +562,20 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 		hpriv->saved_port_map = port_map;
 	}
 
+	/*
+	 * Temporary Marvell 6145 hack: PATA port presence
+	 * is asserted through the standard AHCI port
+	 * presence register, as bit 4 (counting from 0)
+	 */
+	if (pi->flags & AHCI_FLAG_MV_PATA) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "MV_AHCI HACK: port_map %x -> %x\n",
+			   hpriv->port_map,
+			   hpriv->port_map & 0xf);
+
+		port_map &= 0xf;
+	}
+
 	/* cross check port_map and cap.n_ports */
 	if (pi->flags & AHCI_FLAG_HONOR_PI) {
 		u32 tmp_port_map = port_map;
@@ -740,7 +781,7 @@ static void ahci_power_down(struct ata_port *ap)
 }
 #endif
 
-static void ahci_init_port(struct ata_port *ap)
+static void ahci_start_port(struct ata_port *ap)
 {
 	/* enable FIS reception */
 	ahci_start_fis_rx(ap);
@@ -814,39 +855,62 @@ static int ahci_reset_controller(struct ata_host *host)
 	return 0;
 }
 
+static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
+			   int port_no, void __iomem *mmio,
+			   void __iomem *port_mmio)
+{
+	const char *emsg = NULL;
+	int rc;
+	u32 tmp;
+
+	/* make sure port is not active */
+	rc = ahci_deinit_port(ap, &emsg);
+	if (rc)
+		dev_printk(KERN_WARNING, &pdev->dev,
+			   "%s (%d)\n", emsg, rc);
+
+	/* clear SError */
+	tmp = readl(port_mmio + PORT_SCR_ERR);
+	VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
+	writel(tmp, port_mmio + PORT_SCR_ERR);
+
+	/* clear port IRQ */
+	tmp = readl(port_mmio + PORT_IRQ_STAT);
+	VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+	if (tmp)
+		writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+	writel(1 << port_no, mmio + HOST_IRQ_STAT);
+}
+
 static void ahci_init_controller(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
 	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
-	int i, rc;
+	int i;
+	void __iomem *port_mmio;
 	u32 tmp;
 
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-		void __iomem *port_mmio = ahci_port_base(ap);
-		const char *emsg = NULL;
-
-		if (ata_port_is_dummy(ap))
-			continue;
-
-		/* make sure port is not active */
-		rc = ahci_deinit_port(ap, &emsg);
-		if (rc)
-			dev_printk(KERN_WARNING, &pdev->dev,
-				   "%s (%d)\n", emsg, rc);
+	if (host->ports[0]->flags & AHCI_FLAG_MV_PATA) {
+		port_mmio = __ahci_port_base(host, 4);
 
-		/* clear SError */
-		tmp = readl(port_mmio + PORT_SCR_ERR);
-		VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
-		writel(tmp, port_mmio + PORT_SCR_ERR);
+		writel(0, port_mmio + PORT_IRQ_MASK);
 
 		/* clear port IRQ */
 		tmp = readl(port_mmio + PORT_IRQ_STAT);
 		VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
 		if (tmp)
 			writel(tmp, port_mmio + PORT_IRQ_STAT);
+	}
 
-		writel(1 << i, mmio + HOST_IRQ_STAT);
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		port_mmio = ahci_port_base(ap);
+		if (ata_port_is_dummy(ap))
+			continue;
+
+		ahci_port_init(pdev, ap, i, mmio, port_mmio);
 	}
 
 	tmp = readl(mmio + HOST_CTL);
@@ -1232,7 +1296,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 		ata_port_abort(ap);
 }
 
-static void ahci_host_intr(struct ata_port *ap)
+static void ahci_port_intr(struct ata_port *ap)
 {
 	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
 	struct ata_eh_info *ehi = &ap->eh_info;
@@ -1358,7 +1422,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
 
 		ap = host->ports[i];
 		if (ap) {
-			ahci_host_intr(ap);
+			ahci_port_intr(ap);
 			VPRINTK("port %u\n", i);
 		} else {
 			VPRINTK("port %u (no irq)\n", i);
@@ -1466,7 +1530,7 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 		ahci_power_down(ap);
 	else {
 		ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
-		ahci_init_port(ap);
+		ahci_start_port(ap);
 	}
 
 	return rc;
@@ -1475,7 +1539,7 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
 static int ahci_port_resume(struct ata_port *ap)
 {
 	ahci_power_up(ap);
-	ahci_init_port(ap);
+	ahci_start_port(ap);
 
 	return 0;
 }
@@ -1573,13 +1637,8 @@ static int ahci_port_start(struct ata_port *ap)
 
 	ap->private_data = pp;
 
-	/* power up port */
-	ahci_power_up(ap);
-
-	/* initialize port */
-	ahci_init_port(ap);
-
-	return 0;
+	/* engage engines, captain */
+	return ahci_port_resume(ap);
 }
 
 static void ahci_port_stop(struct ata_port *ap)
@@ -1724,7 +1783,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	if (pci_enable_msi(pdev))
+	if ((pi.flags & AHCI_FLAG_NO_MSI) || pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
 
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
@@ -1745,14 +1804,18 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->private_data = hpriv;
 
 	for (i = 0; i < host->n_ports; i++) {
-		if (hpriv->port_map & (1 << i)) {
-			struct ata_port *ap = host->ports[i];
-			void __iomem *port_mmio = ahci_port_base(ap);
+		struct ata_port *ap = host->ports[i];
+		void __iomem *port_mmio = ahci_port_base(ap);
 
+		/* standard SATA port setup */
+		if (hpriv->port_map & (1 << i)) {
 			ap->ioaddr.cmd_addr = port_mmio;
 			ap->ioaddr.scr_addr = port_mmio + PORT_SCR;
-		} else
-			host->ports[i]->ops = &ata_dummy_port_ops;
+		}
+
+		/* disabled/not-implemented port */
+		else
+			ap->ops = &ata_dummy_port_ops;
 	}
 
 	/* initialize adapter */
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 4c6e95c95e4a..430fcf4f9ef3 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -143,10 +143,10 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	u16 command;
 	static const struct ata_port_info info = {
 		.sht = &generic_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &generic_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 9c07b88631be..d9fa329fd157 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -200,6 +200,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* ICH7/7-R (i945, i975) UDMA 100*/
 	{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_133 },
 	{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+	/* ICH8 Mobile PATA Controller */
+	{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
 
 	/* NOTE: The following PCI ids must be kept in sync with the
 	 * list in drivers/pci/quirks.c.
@@ -412,7 +414,7 @@ static const struct piix_map_db ich6m_map_db = {
 	 */
 	.map = {
 		/* PM   PS   SM   SS       MAP */
-		{  P0,  P2,  RV,  RV }, /* 00b */
+		{  P0,  P2,  NA,  NA }, /* 00b */
 		{ IDE, IDE,  P1,  P3 }, /* 01b */
 		{  P0,  P2, IDE, IDE }, /* 10b */
 		{  RV,  RV,  RV,  RV },
@@ -495,7 +497,7 @@ static struct ata_port_info piix_port_info[] = {
 		.flags		= PIIX_SATA_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
 
@@ -505,7 +507,7 @@ static struct ata_port_info piix_port_info[] = {
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SCR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
 
@@ -516,7 +518,7 @@ static struct ata_port_info piix_port_info[] = {
 				  PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
 
@@ -527,7 +529,7 @@ static struct ata_port_info piix_port_info[] = {
 				  PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
 
@@ -538,7 +540,7 @@ static struct ata_port_info piix_port_info[] = {
 				  PIIX_FLAG_AHCI,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
 
@@ -685,8 +687,14 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
 	if (adev->class == ATA_DEV_ATA)
 		control |= 4;	/* PPE enable */
 
+	/* PIO configuration clears DTE unconditionally.  It will be
+	 * programmed in set_dmamode which is guaranteed to be called
+	 * after set_piomode if any DMA mode is available.
+	 */
 	pci_read_config_word(dev, master_port, &master_data);
 	if (is_slave) {
+		/* clear TIME1|IE1|PPE1|DTE1 */
+		master_data &= 0xff0f;
 		/* Enable SITRE (seperate slave timing register) */
 		master_data |= 0x4000;
 		/* enable PPE1, IE1 and TIME1 as needed */
@@ -694,12 +702,14 @@ static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		pci_read_config_byte(dev, slave_port, &slave_data);
 		slave_data &= (ap->port_no ? 0x0f : 0xf0);
 		/* Load the timing nibble for this slave */
-		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
+		slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
+						<< (ap->port_no ? 4 : 0);
 	} else {
-		/* Master keeps the bits in a different format */
-		master_data &= 0xccf8;
+		/* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
+		master_data &= 0xccf0;
 		/* Enable PPE, IE and TIME as appropriate */
 		master_data |= control;
+		/* load ISP and RCT */
 		master_data |=
 			(timings[pio][0] << 12) |
 			(timings[pio][1] << 8);
@@ -816,7 +826,7 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i
 			master_data &= 0xFF4F;  /* Mask out IORDY|TIME1|DMAONLY */
 			master_data |= control << 4;
 			pci_read_config_byte(dev, 0x44, &slave_data);
-			slave_data &= (0x0F + 0xE1 * ap->port_no);
+			slave_data &= (ap->port_no ? 0x0f : 0xf0);
 			/* Load the matching timing */
 			slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
 			pci_write_config_byte(dev, 0x44, slave_data);
@@ -828,8 +838,11 @@ static void do_pata_set_dmamode (struct ata_port *ap, struct ata_device *adev, i
 				(timings[pio][0] << 12) |
 				(timings[pio][1] << 8);
 		}
-		udma_enable &= ~(1 << devid);
-		pci_write_config_word(dev, master_port, master_data);
+
+		if (ap->udma_mask) {
+			udma_enable &= ~(1 << devid);
+			pci_write_config_word(dev, master_port, master_data);
+		}
 	}
 	/* Don't scribble on 0x48 if the controller does not support UDMA */
 	if (ap->udma_mask)
@@ -915,20 +928,18 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev)
 {
 	struct pci_dev *pdev = NULL;
 	u16 cfg;
-	u8 rev;
 	int no_piix_dma = 0;
 
 	while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
 	{
 		/* Look for 450NX PXB. Check for problem configurations
 		   A PCI quirk checks bit 6 already */
-		pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 		pci_read_config_word(pdev, 0x41, &cfg);
 		/* Only on the original revision: IDE DMA can hang */
-		if (rev == 0x00)
+		if (pdev->revision == 0x00)
 			no_piix_dma = 1;
 		/* On all revisions below 5 PXB bus lock must be disabled for IDE */
-		else if (cfg & (1<<14) && rev < 5)
+		else if (cfg & (1<<14) && pdev->revision < 5)
 			no_piix_dma = 2;
 	}
 	if (no_piix_dma)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 02236739b40f..c059f78ad944 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -24,15 +24,13 @@
 #include <acpi/acmacros.h>
 #include <acpi/actypes.h>
 
-#define SATA_ROOT_PORT(x)	(((x) >> 16) & 0xffff)
-#define SATA_PORT_NUMBER(x)	((x) & 0xffff)	/* or NO_PORT_MULT */
 #define NO_PORT_MULT		0xffff
-#define SATA_ADR_RSVD		0xffffffff
+#define SATA_ADR(root,pmp)	(((root) << 16) | (pmp))
 
 #define REGS_PER_GTF		7
-struct taskfile_array {
-	u8	tfa[REGS_PER_GTF];	/* regs. 0x1f1 - 0x1f7 */
-};
+struct ata_acpi_gtf {
+	u8	tf[REGS_PER_GTF];	/* regs. 0x1f1 - 0x1f7 */
+} __packed;
 
 /*
  *	Helper - belongs in the PCI layer somewhere eventually
@@ -42,237 +40,173 @@ static int is_pci_dev(struct device *dev)
 	return (dev->bus == &pci_bus_type);
 }
 
+static void ata_acpi_associate_sata_port(struct ata_port *ap)
+{
+	acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+
+	ap->device->acpi_handle = acpi_get_child(ap->host->acpi_handle, adr);
+}
+
+static void ata_acpi_associate_ide_port(struct ata_port *ap)
+{
+	int max_devices, i;
+
+	ap->acpi_handle = acpi_get_child(ap->host->acpi_handle, ap->port_no);
+	if (!ap->acpi_handle)
+		return;
+
+	max_devices = 1;
+	if (ap->flags & ATA_FLAG_SLAVE_POSS)
+		max_devices++;
+
+	for (i = 0; i < max_devices; i++) {
+		struct ata_device *dev = &ap->device[i];
+
+		dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
+	}
+}
+
 /**
- * sata_get_dev_handle - finds acpi_handle and PCI device.function
- * @dev: device to locate
- * @handle: returned acpi_handle for @dev
- * @pcidevfn: return PCI device.func for @dev
+ * ata_acpi_associate - associate ATA host with ACPI objects
+ * @host: target ATA host
+ *
+ * Look up ACPI objects associated with @host and initialize
+ * acpi_handle fields of @host, its ports and devices accordingly.
  *
- * This function is somewhat SATA-specific.  Or at least the
- * PATA & SATA versions of this function are different,
- * so it's not entirely generic code.
+ * LOCKING:
+ * EH context.
  *
- * Returns 0 on success, <0 on error.
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
-static int sata_get_dev_handle(struct device *dev, acpi_handle *handle,
-					acpi_integer *pcidevfn)
+void ata_acpi_associate(struct ata_host *host)
 {
-	struct pci_dev	*pci_dev;
-	acpi_integer	addr;
-
-	if (!is_pci_dev(dev))
-		return -ENODEV;
-
-	pci_dev = to_pci_dev(dev);	/* NOTE: PCI-specific */
-	/* Please refer to the ACPI spec for the syntax of _ADR. */
-	addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
-	*pcidevfn = addr;
-	*handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
-	if (!*handle)
-		return -ENODEV;
-	return 0;
+	int i;
+
+	if (!is_pci_dev(host->dev) || libata_noacpi)
+		return;
+
+	host->acpi_handle = DEVICE_ACPI_HANDLE(host->dev);
+	if (!host->acpi_handle)
+		return;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (host->ports[0]->flags & ATA_FLAG_ACPI_SATA)
+			ata_acpi_associate_sata_port(ap);
+		else
+			ata_acpi_associate_ide_port(ap);
+	}
 }
 
 /**
- * pata_get_dev_handle - finds acpi_handle and PCI device.function
- * @dev: device to locate
- * @handle: returned acpi_handle for @dev
- * @pcidevfn: return PCI device.func for @dev
+ * ata_acpi_gtm - execute _GTM
+ * @ap: target ATA port
+ * @gtm: out parameter for _GTM result
+ *
+ * Evaluate _GTM and store the result in @gtm.
  *
- * The PATA and SATA versions of this function are different.
+ * LOCKING:
+ * EH context.
  *
- * Returns 0 on success, <0 on error.
+ * RETURNS:
+ * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
  */
-static int pata_get_dev_handle(struct device *dev, acpi_handle *handle,
-				acpi_integer *pcidevfn)
+static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm)
 {
-	unsigned int bus, devnum, func;
-	acpi_integer addr;
-	acpi_handle dev_handle, parent_handle;
-	struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
-					.pointer = NULL};
+	struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER };
+	union acpi_object *out_obj;
 	acpi_status status;
-	struct acpi_device_info	*dinfo = NULL;
-	int ret = -ENODEV;
-	struct pci_dev *pdev;
-
-	if (!is_pci_dev(dev))
-		return -ENODEV;
-
-	pdev = to_pci_dev(dev);
-
-	bus = pdev->bus->number;
-	devnum = PCI_SLOT(pdev->devfn);
-	func = PCI_FUNC(pdev->devfn);
-
-	dev_handle = DEVICE_ACPI_HANDLE(dev);
-	parent_handle = DEVICE_ACPI_HANDLE(dev->parent);
-
-	status = acpi_get_object_info(parent_handle, &buffer);
-	if (ACPI_FAILURE(status))
-		goto err;
-
-	dinfo = buffer.pointer;
-	if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
-	    dinfo->address == bus) {
-		/* ACPI spec for _ADR for PCI bus: */
-		addr = (acpi_integer)(devnum << 16 | func);
-		*pcidevfn = addr;
-		*handle = dev_handle;
-	} else {
-		goto err;
+	int rc = 0;
+
+	status = acpi_evaluate_object(ap->acpi_handle, "_GTM", NULL, &output);
+
+	rc = -ENOENT;
+	if (status == AE_NOT_FOUND)
+		goto out_free;
+
+	rc = -EINVAL;
+	if (ACPI_FAILURE(status)) {
+		ata_port_printk(ap, KERN_ERR,
+				"ACPI get timing mode failed (AE 0x%x)\n",
+				status);
+		goto out_free;
 	}
 
-	if (!*handle)
-		goto err;
-	ret = 0;
-err:
-	kfree(dinfo);
-	return ret;
-}
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ata_port_printk(ap, KERN_WARNING,
+				"_GTM returned unexpected object type 0x%x\n",
+				out_obj->type);
 
-struct walk_info {		/* can be trimmed some */
-	struct device	*dev;
-	struct acpi_device *adev;
-	acpi_handle	handle;
-	acpi_integer	pcidevfn;
-	unsigned int	drivenum;
-	acpi_handle	obj_handle;
-	struct ata_port *ataport;
-	struct ata_device *atadev;
-	u32		sata_adr;
-	int		status;
-	char		basepath[ACPI_PATHNAME_MAX];
-	int		basepath_len;
-};
-
-static acpi_status get_devices(acpi_handle handle,
-				u32 level, void *context, void **return_value)
-{
-	acpi_status		status;
-	struct walk_info	*winfo = context;
-	struct acpi_buffer	namebuf = {ACPI_ALLOCATE_BUFFER, NULL};
-	char			*pathname;
-	struct acpi_buffer	buffer;
-	struct acpi_device_info	*dinfo;
-
-	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &namebuf);
-	if (status)
-		goto ret;
-	pathname = namebuf.pointer;
-
-	buffer.length = ACPI_ALLOCATE_BUFFER;
-	buffer.pointer = NULL;
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_FAILURE(status))
-		goto out2;
-
-	dinfo = buffer.pointer;
-
-	/* find full device path name for pcidevfn */
-	if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
-	    dinfo->address == winfo->pcidevfn) {
-		if (ata_msg_probe(winfo->ataport))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				":%s: matches pcidevfn (0x%llx)\n",
-				pathname, winfo->pcidevfn);
-		strlcpy(winfo->basepath, pathname,
-			sizeof(winfo->basepath));
-		winfo->basepath_len = strlen(pathname);
-		goto out;
+		goto out_free;
 	}
 
-	/* if basepath is not yet known, ignore this object */
-	if (!winfo->basepath_len)
-		goto out;
-
-	/* if this object is in scope of basepath, maybe use it */
-	if (strncmp(pathname, winfo->basepath,
-	    winfo->basepath_len) == 0) {
-		if (!(dinfo->valid & ACPI_VALID_ADR))
-			goto out;
-		if (ata_msg_probe(winfo->ataport))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				"GOT ONE: (%s) root_port = 0x%llx,"
-				" port_num = 0x%llx\n", pathname,
-				SATA_ROOT_PORT(dinfo->address),
-				SATA_PORT_NUMBER(dinfo->address));
-		/* heuristics: */
-		if (SATA_PORT_NUMBER(dinfo->address) != NO_PORT_MULT)
-			if (ata_msg_probe(winfo->ataport))
-				ata_dev_printk(winfo->atadev,
-					KERN_DEBUG, "warning: don't"
-					" know how to handle SATA port"
-					" multiplier\n");
-		if (SATA_ROOT_PORT(dinfo->address) ==
-			winfo->ataport->port_no &&
-		    SATA_PORT_NUMBER(dinfo->address) == NO_PORT_MULT) {
-			if (ata_msg_probe(winfo->ataport))
-				ata_dev_printk(winfo->atadev,
-					KERN_DEBUG,
-					"THIS ^^^^^ is the requested"
-					" SATA drive (handle = 0x%p)\n",
-					handle);
-			winfo->sata_adr = dinfo->address;
-			winfo->obj_handle = handle;
-		}
+	if (out_obj->buffer.length != sizeof(struct ata_acpi_gtm)) {
+		ata_port_printk(ap, KERN_ERR,
+				"_GTM returned invalid length %d\n",
+				out_obj->buffer.length);
+		goto out_free;
 	}
-out:
-	kfree(dinfo);
-out2:
-	kfree(pathname);
 
-ret:
-	return status;
+	memcpy(gtm, out_obj->buffer.pointer, sizeof(struct ata_acpi_gtm));
+	rc = 0;
+ out_free:
+	kfree(output.pointer);
+	return rc;
 }
 
-/* Get the SATA drive _ADR object. */
-static int get_sata_adr(struct device *dev, acpi_handle handle,
-			acpi_integer pcidevfn, unsigned int drive,
-			struct ata_port *ap,
-			struct ata_device *atadev, u32 *dev_adr)
+/**
+ * ata_acpi_stm - execute _STM
+ * @ap: target ATA port
+ * @stm: timing parameter to _STM
+ *
+ * Evaluate _STM with timing parameter @stm.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure.
+ */
+static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
 {
-	acpi_status	status;
-	struct walk_info *winfo;
-	int		err = -ENOMEM;
-
-	winfo = kzalloc(sizeof(struct walk_info), GFP_KERNEL);
-	if (!winfo)
-		goto out;
-
-	winfo->dev = dev;
-	winfo->atadev = atadev;
-	winfo->ataport = ap;
-	if (acpi_bus_get_device(handle, &winfo->adev) < 0)
-		if (ata_msg_probe(ap))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				"acpi_bus_get_device failed\n");
-	winfo->handle = handle;
-	winfo->pcidevfn = pcidevfn;
-	winfo->drivenum = drive;
+	acpi_status status;
+	struct acpi_object_list         input;
+	union acpi_object               in_params[3];
 
-	status = acpi_get_devices(NULL, get_devices, winfo, NULL);
+	in_params[0].type = ACPI_TYPE_BUFFER;
+	in_params[0].buffer.length = sizeof(struct ata_acpi_gtm);
+	in_params[0].buffer.pointer = (u8 *)stm;
+	/* Buffers for id may need byteswapping ? */
+	in_params[1].type = ACPI_TYPE_BUFFER;
+	in_params[1].buffer.length = 512;
+	in_params[1].buffer.pointer = (u8 *)ap->device[0].id;
+	in_params[2].type = ACPI_TYPE_BUFFER;
+	in_params[2].buffer.length = 512;
+	in_params[2].buffer.pointer = (u8 *)ap->device[1].id;
+
+	input.count = 3;
+	input.pointer = in_params;
+
+	status = acpi_evaluate_object(ap->acpi_handle, "_STM", &input, NULL);
+
+	if (status == AE_NOT_FOUND)
+		return -ENOENT;
 	if (ACPI_FAILURE(status)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				"%s: acpi_get_devices failed\n",
-				__FUNCTION__);
-		err = -ENODEV;
-	} else {
-		*dev_adr = winfo->sata_adr;
-		atadev->obj_handle = winfo->obj_handle;
-		err = 0;
+		ata_port_printk(ap, KERN_ERR,
+			"ACPI set timing mode failed (status=0x%x)\n", status);
+		return -EINVAL;
 	}
-	kfree(winfo);
-out:
-	return err;
+	return 0;
 }
 
 /**
- * do_drive_get_GTF - get the drive bootup default taskfile settings
+ * ata_dev_get_GTF - get the drive bootup default taskfile settings
  * @dev: target ATA device
- * @gtf_length: number of bytes of _GTF data returned at @gtf_address
- * @gtf_address: buffer containing _GTF taskfile arrays
+ * @gtf: output parameter for buffer containing _GTF taskfile arrays
+ * @ptr_to_free: pointer which should be freed
  *
  * This applies to both PATA and SATA drives.
  *
@@ -282,121 +216,41 @@ out:
  * The <variable number> is not known in advance, so have ACPI-CA
  * allocate the buffer as needed and return it, then free it later.
  *
- * The returned @gtf_length and @gtf_address are only valid if the
- * function return value is 0.
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't
+ * contain valid data.  -errno on other errors.
  */
-static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
-			    unsigned long *gtf_address, unsigned long *obj_loc)
+static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
+			   void **ptr_to_free)
 {
 	struct ata_port *ap = dev->ap;
 	acpi_status status;
-	acpi_handle dev_handle = NULL;
-	acpi_handle chan_handle, drive_handle;
-	acpi_integer pcidevfn = 0;
-	u32 dev_adr;
 	struct acpi_buffer output;
 	union acpi_object *out_obj;
-	struct device *gdev = ap->host->dev;
-	int err = -ENODEV;
+	int rc = 0;
 
-	*gtf_length = 0;
-	*gtf_address = 0UL;
-	*obj_loc = 0UL;
-
-	if (libata_noacpi)
-		return 0;
+	/* set up output buffer */
+	output.length = ACPI_ALLOCATE_BUFFER;
+	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
 
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
 			       __FUNCTION__, ap->port_no);
 
-	if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG, "%s: ERR: "
-				"ata_dev_present: %d, PORT_DISABLED: %lu\n",
-				__FUNCTION__, ata_dev_enabled(dev),
-				ap->flags & ATA_FLAG_DISABLED);
-		goto out;
-	}
-
-	/* Don't continue if device has no _ADR method.
-	 * _GTF is intended for known motherboard devices. */
-	if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
-		err = pata_get_dev_handle(gdev, &dev_handle, &pcidevfn);
-		if (err < 0) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: pata_get_dev_handle failed (%d)\n",
-					__FUNCTION__, err);
-			goto out;
-		}
-	} else {
-		err = sata_get_dev_handle(gdev, &dev_handle, &pcidevfn);
-		if (err < 0) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: sata_get_dev_handle failed (%d\n",
-					__FUNCTION__, err);
-			goto out;
-		}
-	}
-
-	/* Get this drive's _ADR info. if not already known. */
-	if (!dev->obj_handle) {
-		if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
-			/* get child objects of dev_handle == channel objects,
-	 		 * + _their_ children == drive objects */
-			/* channel is ap->port_no */
-			chan_handle = acpi_get_child(dev_handle,
-						ap->port_no);
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: chan adr=%d: chan_handle=0x%p\n",
-					__FUNCTION__, ap->port_no,
-					chan_handle);
-			if (!chan_handle) {
-				err = -ENODEV;
-				goto out;
-			}
-			/* TBD: could also check ACPI object VALID bits */
-			drive_handle = acpi_get_child(chan_handle, dev->devno);
-			if (!drive_handle) {
-				err = -ENODEV;
-				goto out;
-			}
-			dev_adr = dev->devno;
-			dev->obj_handle = drive_handle;
-		} else {	/* for SATA mode */
-			dev_adr = SATA_ADR_RSVD;
-			err = get_sata_adr(gdev, dev_handle, pcidevfn, 0,
-					ap, dev, &dev_adr);
-		}
-		if (err < 0 || dev_adr == SATA_ADR_RSVD ||
-		    !dev->obj_handle) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: get_sata/pata_adr failed: "
-					"err=%d, dev_adr=%u, obj_handle=0x%p\n",
-					__FUNCTION__, err, dev_adr,
-					dev->obj_handle);
-			goto out;
-		}
-	}
-
-	/* Setting up output buffer */
-	output.length = ACPI_ALLOCATE_BUFFER;
-	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
-
 	/* _GTF has no input parameters */
-	err = -EIO;
-	status = acpi_evaluate_object(dev->obj_handle, "_GTF",
-					NULL, &output);
+	status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
+
 	if (ACPI_FAILURE(status)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				"%s: Run _GTF error: status = 0x%x\n",
-				__FUNCTION__, status);
-		goto out;
+		if (status != AE_NOT_FOUND) {
+			ata_dev_printk(dev, KERN_WARNING,
+				       "_GTF evaluation failed (AE 0x%x)\n",
+				       status);
+			rc = -EIO;
+		}
+		goto out_free;
 	}
 
 	if (!output.length || !output.pointer) {
@@ -406,43 +260,39 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
 				__FUNCTION__,
 				(unsigned long long)output.length,
 				output.pointer);
-		kfree(output.pointer);
-		goto out;
+		goto out_free;
 	}
 
 	out_obj = output.pointer;
 	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		kfree(output.pointer);
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
-				"error: expected object type of "
-				" ACPI_TYPE_BUFFER, got 0x%x\n",
-				__FUNCTION__, out_obj->type);
-		err = -ENOENT;
-		goto out;
+		ata_dev_printk(dev, KERN_WARNING,
+			       "_GTF unexpected object type 0x%x\n",
+			       out_obj->type);
+		rc = -EINVAL;
+		goto out_free;
 	}
 
-	if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
-	    out_obj->buffer.length % REGS_PER_GTF) {
-		if (ata_msg_drv(ap))
-			ata_dev_printk(dev, KERN_ERR,
-				"%s: unexpected GTF length (%d) or addr (0x%p)\n",
-				__FUNCTION__, out_obj->buffer.length,
-				out_obj->buffer.pointer);
-		err = -ENOENT;
-		goto out;
+	if (out_obj->buffer.length % REGS_PER_GTF) {
+		ata_dev_printk(dev, KERN_WARNING,
+			       "unexpected _GTF length (%d)\n",
+			       out_obj->buffer.length);
+		rc = -EINVAL;
+		goto out_free;
 	}
 
-	*gtf_length = out_obj->buffer.length;
-	*gtf_address = (unsigned long)out_obj->buffer.pointer;
-	*obj_loc = (unsigned long)out_obj;
+	*ptr_to_free = out_obj;
+	*gtf = (void *)out_obj->buffer.pointer;
+	rc = out_obj->buffer.length / REGS_PER_GTF;
+
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: returning "
-			"gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
-			__FUNCTION__, *gtf_length, *gtf_address, *obj_loc);
-	err = 0;
-out:
-	return err;
+			"gtf=%p, gtf_count=%d, ptr_to_free=%p\n",
+			__FUNCTION__, *gtf, rc, *ptr_to_free);
+	return rc;
+
+ out_free:
+	kfree(output.pointer);
+	return rc;
 }
 
 /**
@@ -461,154 +311,99 @@ out:
  * function also waits for idle after writing control and before
  * writing the remaining registers.
  *
- * LOCKING: TBD:
- * Inherited from caller.
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
-static void taskfile_load_raw(struct ata_device *dev,
-			      const struct taskfile_array *gtf)
+static int taskfile_load_raw(struct ata_device *dev,
+			      const struct ata_acpi_gtf *gtf)
 {
 	struct ata_port *ap = dev->ap;
-	struct ata_taskfile tf;
-	unsigned int err;
+	struct ata_taskfile tf, rtf;
+	unsigned int err_mask;
 
-	if (ata_msg_probe(ap))
-		ata_dev_printk(dev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
-			"%02x %02x %02x %02x %02x %02x %02x\n",
-			__FUNCTION__,
-			gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
-			gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
-
-	if ((gtf->tfa[0] == 0) && (gtf->tfa[1] == 0) && (gtf->tfa[2] == 0)
-	    && (gtf->tfa[3] == 0) && (gtf->tfa[4] == 0) && (gtf->tfa[5] == 0)
-	    && (gtf->tfa[6] == 0))
-		return;
+	if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
+	    && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0)
+	    && (gtf->tf[6] == 0))
+		return 0;
 
 	ata_tf_init(dev, &tf);
 
 	/* convert gtf to tf */
 	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
 	tf.protocol = ATA_PROT_NODATA;
-	tf.feature = gtf->tfa[0];	/* 0x1f1 */
-	tf.nsect   = gtf->tfa[1];	/* 0x1f2 */
-	tf.lbal    = gtf->tfa[2];	/* 0x1f3 */
-	tf.lbam    = gtf->tfa[3];	/* 0x1f4 */
-	tf.lbah    = gtf->tfa[4];	/* 0x1f5 */
-	tf.device  = gtf->tfa[5];	/* 0x1f6 */
-	tf.command = gtf->tfa[6];	/* 0x1f7 */
-
-	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
-	if (err && ata_msg_probe(ap))
-		ata_dev_printk(dev, KERN_ERR,
-			"%s: ata_exec_internal failed: %u\n",
-			__FUNCTION__, err);
-}
-
-/**
- * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
- * @dev: target ATA device
- * @gtf_length: total number of bytes of _GTF taskfiles
- * @gtf_address: location of _GTF taskfile arrays
- *
- * This applies to both PATA and SATA drives.
- *
- * Write {gtf_address, length gtf_length} in groups of
- * REGS_PER_GTF bytes.
- */
-static int do_drive_set_taskfiles(struct ata_device *dev,
-				  unsigned int gtf_length,
-				  unsigned long gtf_address)
-{
-	struct ata_port *ap = dev->ap;
-	int err = -ENODEV;
-	int gtf_count = gtf_length / REGS_PER_GTF;
-	int ix;
-	struct taskfile_array	*gtf;
+	tf.feature = gtf->tf[0];	/* 0x1f1 */
+	tf.nsect   = gtf->tf[1];	/* 0x1f2 */
+	tf.lbal    = gtf->tf[2];	/* 0x1f3 */
+	tf.lbam    = gtf->tf[3];	/* 0x1f4 */
+	tf.lbah    = gtf->tf[4];	/* 0x1f5 */
+	tf.device  = gtf->tf[5];	/* 0x1f6 */
+	tf.command = gtf->tf[6];	/* 0x1f7 */
 
 	if (ata_msg_probe(ap))
-		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
-			       __FUNCTION__, ap->port_no);
-
-	if (libata_noacpi || !(ap->flags & ATA_FLAG_ACPI_SATA))
-		return 0;
-
-	if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))
-		goto out;
-	if (!gtf_count)		/* shouldn't be here */
-		goto out;
-
-	if (gtf_length % REGS_PER_GTF) {
-		if (ata_msg_drv(ap))
-			ata_dev_printk(dev, KERN_ERR,
-				"%s: unexpected GTF length (%d)\n",
-				__FUNCTION__, gtf_length);
-		goto out;
-	}
-
-	for (ix = 0; ix < gtf_count; ix++) {
-		gtf = (struct taskfile_array *)
-			(gtf_address + ix * REGS_PER_GTF);
-
-		/* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
-		taskfile_load_raw(dev, gtf);
+		ata_dev_printk(dev, KERN_DEBUG, "executing ACPI cmd "
+			       "%02x/%02x:%02x:%02x:%02x:%02x:%02x\n",
+			       tf.command, tf.feature, tf.nsect,
+			       tf.lbal, tf.lbam, tf.lbah, tf.device);
+
+	rtf = tf;
+	err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0);
+	if (err_mask) {
+		ata_dev_printk(dev, KERN_ERR,
+			"ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed "
+			"(Emask=0x%x Stat=0x%02x Err=0x%02x)\n",
+			tf.command, tf.feature, tf.nsect, tf.lbal, tf.lbam,
+			tf.lbah, tf.device, err_mask, rtf.command, rtf.feature);
+		return -EIO;
 	}
 
-	err = 0;
-out:
-	return err;
+	return 0;
 }
 
 /**
  * ata_acpi_exec_tfs - get then write drive taskfile settings
- * @ap: the ata_port for the drive
+ * @dev: target ATA device
  *
- * This applies to both PATA and SATA drives.
+ * Evaluate _GTF and excute returned taskfiles.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * Number of executed taskfiles on success, 0 if _GTF doesn't exist or
+ * doesn't contain valid data.  -errno on other errors.
  */
-int ata_acpi_exec_tfs(struct ata_port *ap)
+static int ata_acpi_exec_tfs(struct ata_device *dev)
 {
-	int ix;
-	int ret = 0;
-	unsigned int gtf_length;
-	unsigned long gtf_address;
-	unsigned long obj_loc;
-
-	if (libata_noacpi)
-		return 0;
-	/*
-	 * TBD - implement PATA support.  For now,
-	 * we should not run GTF on PATA devices since some
-	 * PATA require execution of GTM/STM before GTF.
-	 */
-	if (!(ap->flags & ATA_FLAG_ACPI_SATA))
-		return 0;
-
-	for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
-		struct ata_device *dev = &ap->device[ix];
-
-		if (!ata_dev_enabled(dev))
-			continue;
-
-		ret = do_drive_get_GTF(dev, &gtf_length, &gtf_address,
-				       &obj_loc);
-		if (ret < 0) {
-			if (ata_msg_probe(ap))
-				ata_port_printk(ap, KERN_DEBUG,
-					"%s: get_GTF error (%d)\n",
-					__FUNCTION__, ret);
-			break;
-		}
-
-		ret = do_drive_set_taskfiles(dev, gtf_length, gtf_address);
-		kfree((void *)obj_loc);
-		if (ret < 0) {
-			if (ata_msg_probe(ap))
-				ata_port_printk(ap, KERN_DEBUG,
-					"%s: set_taskfiles error (%d)\n",
-					__FUNCTION__, ret);
-			break;
-		}
+	struct ata_acpi_gtf *gtf = NULL;
+	void *ptr_to_free = NULL;
+	int gtf_count, i, rc;
+
+	/* get taskfiles */
+	rc = ata_dev_get_GTF(dev, &gtf, &ptr_to_free);
+	if (rc < 0)
+		return rc;
+	gtf_count = rc;
+
+	/* execute them */
+	for (i = 0, rc = 0; i < gtf_count; i++) {
+		int tmp;
+
+		/* ACPI errors are eventually ignored.  Run till the
+		 * end even after errors.
+		 */
+		tmp = taskfile_load_raw(dev, gtf++);
+		if (!rc)
+			rc = tmp;
 	}
 
-	return ret;
+	kfree(ptr_to_free);
+
+	if (rc == 0)
+		return gtf_count;
+	return rc;
 }
 
 /**
@@ -620,62 +415,25 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
  * ATM this function never returns a failure.  It is an optional
  * method and if it fails for whatever reason, we should still
  * just keep going.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
-int ata_acpi_push_id(struct ata_device *dev)
+static int ata_acpi_push_id(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->ap;
-	acpi_handle handle;
-	acpi_integer pcidevfn;
 	int err;
-	struct device *gdev = ap->host->dev;
-	u32 dev_adr;
 	acpi_status status;
 	struct acpi_object_list input;
 	union acpi_object in_params[1];
 
-	if (libata_noacpi)
-		return 0;
-
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
 			       __FUNCTION__, dev->devno, ap->port_no);
 
-	/* Don't continue if not a SATA device. */
-	if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				"%s: Not a SATA device\n", __FUNCTION__);
-		goto out;
-	}
-
-	/* Don't continue if device has no _ADR method.
-	 * _SDD is intended for known motherboard devices. */
-	err = sata_get_dev_handle(gdev, &handle, &pcidevfn);
-	if (err < 0) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				"%s: sata_get_dev_handle failed (%d\n",
-				__FUNCTION__, err);
-		goto out;
-	}
-
-	/* Get this drive's _ADR info, if not already known */
-	if (!dev->obj_handle) {
-		dev_adr = SATA_ADR_RSVD;
-		err = get_sata_adr(gdev, handle, pcidevfn, dev->devno, ap, dev,
-					&dev_adr);
-		if (err < 0 || dev_adr == SATA_ADR_RSVD ||
-			!dev->obj_handle) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: get_sata_adr failed: "
-					"err=%d, dev_adr=%u, obj_handle=0x%p\n",
-					__FUNCTION__, err, dev_adr,
-					dev->obj_handle);
-			goto out;
-		}
-	}
-
 	/* Give the drive Identify data to the drive via the _SDD method */
 	/* _SDD: set up input parameters */
 	input.count = 1;
@@ -687,20 +445,150 @@ int ata_acpi_push_id(struct ata_device *dev)
 
 	/* It's OK for _SDD to be missing too. */
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
-	status = acpi_evaluate_object(dev->obj_handle, "_SDD", &input, NULL);
+	status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
 
 	err = ACPI_FAILURE(status) ? -EIO : 0;
-	if (err < 0) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				       "%s _SDD error: status = 0x%x\n",
-				       __FUNCTION__, status);
+	if (err < 0)
+		ata_dev_printk(dev, KERN_WARNING,
+			       "ACPI _SDD failed (AE 0x%x)\n", status);
+
+	return err;
+}
+
+/**
+ * ata_acpi_on_suspend - ATA ACPI hook called on suspend
+ * @ap: target ATA port
+ *
+ * This function is called when @ap is about to be suspended.  All
+ * devices are already put to sleep but the port_suspend() callback
+ * hasn't been executed yet.  Error return from this function aborts
+ * suspend.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int ata_acpi_on_suspend(struct ata_port *ap)
+{
+	unsigned long flags;
+	int rc;
+
+	/* proceed iff per-port acpi_handle is valid */
+	if (!ap->acpi_handle)
+		return 0;
+	BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
+
+	/* store timing parameters */
+	rc = ata_acpi_gtm(ap, &ap->acpi_gtm);
+
+	spin_lock_irqsave(ap->lock, flags);
+	if (rc == 0)
+		ap->pflags |= ATA_PFLAG_GTM_VALID;
+	else
+		ap->pflags &= ~ATA_PFLAG_GTM_VALID;
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	if (rc == -ENOENT)
+		rc = 0;
+	return rc;
+}
+
+/**
+ * ata_acpi_on_resume - ATA ACPI hook called on resume
+ * @ap: target ATA port
+ *
+ * This function is called when @ap is resumed - right after port
+ * itself is resumed but before any EH action is taken.
+ *
+ * LOCKING:
+ * EH context.
+ */
+void ata_acpi_on_resume(struct ata_port *ap)
+{
+	int i;
+
+	if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) {
+		BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
+
+		/* restore timing parameters */
+		ata_acpi_stm(ap, &ap->acpi_gtm);
 	}
 
-	/* always return success */
-out:
-	return 0;
+	/* schedule _GTF */
+	for (i = 0; i < ATA_MAX_DEVICES; i++)
+		ap->device[i].flags |= ATA_DFLAG_ACPI_PENDING;
 }
 
+/**
+ * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
+ * @dev: target ATA device
+ *
+ * This function is called when @dev is about to be configured.
+ * IDENTIFY data might have been modified after this hook is run.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * Positive number if IDENTIFY data needs to be refreshed, 0 if not,
+ * -errno on failure.
+ */
+int ata_acpi_on_devcfg(struct ata_device *dev)
+{
+	struct ata_port *ap = dev->ap;
+	struct ata_eh_context *ehc = &ap->eh_context;
+	int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA;
+	int rc;
+
+	if (!dev->acpi_handle)
+		return 0;
+
+	/* do we need to do _GTF? */
+	if (!(dev->flags & ATA_DFLAG_ACPI_PENDING) &&
+	    !(acpi_sata && (ehc->i.flags & ATA_EHI_DID_HARDRESET)))
+		return 0;
+
+	/* do _SDD if SATA */
+	if (acpi_sata) {
+		rc = ata_acpi_push_id(dev);
+		if (rc)
+			goto acpi_err;
+	}
+
+	/* do _GTF */
+	rc = ata_acpi_exec_tfs(dev);
+	if (rc < 0)
+		goto acpi_err;
+
+	dev->flags &= ~ATA_DFLAG_ACPI_PENDING;
+
+	/* refresh IDENTIFY page if any _GTF command has been executed */
+	if (rc > 0) {
+		rc = ata_dev_reread_id(dev, 0);
+		if (rc < 0) {
+			ata_dev_printk(dev, KERN_ERR, "failed to IDENTIFY "
+				       "after ACPI commands\n");
+			return rc;
+		}
+	}
 
+	return 0;
+
+ acpi_err:
+	/* let EH retry on the first failure, disable ACPI on the second */
+	if (dev->flags & ATA_DFLAG_ACPI_FAILED) {
+		ata_dev_printk(dev, KERN_WARNING, "ACPI on devcfg failed the "
+			       "second time, disabling (errno=%d)\n", rc);
+
+		dev->acpi_handle = NULL;
+
+		/* if port is working, request IDENTIFY reload and continue */
+		if (!(ap->pflags & ATA_PFLAG_FROZEN))
+			rc = 1;
+	}
+	dev->flags |= ATA_DFLAG_ACPI_FAILED;
+	return rc;
+}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 981b397cb46b..88e2dd0983b5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -71,6 +71,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
 					u16 heads, u16 sectors);
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
 static void ata_dev_xfermask(struct ata_device *dev);
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
 unsigned int ata_print_id = 1;
 static struct workqueue_struct *ata_wq;
@@ -1283,18 +1284,11 @@ static unsigned int ata_id_xfermask(const u16 *id)
 void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
 			 unsigned long delay)
 {
-	int rc;
-
-	if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK)
-		return;
-
 	PREPARE_DELAYED_WORK(&ap->port_task, fn);
 	ap->port_task_data = data;
 
-	rc = queue_delayed_work(ata_wq, &ap->port_task, delay);
-
-	/* rc == 0 means that another user is using port task */
-	WARN_ON(rc == 0);
+	/* may fail if ata_port_flush_task() in progress */
+	queue_delayed_work(ata_wq, &ap->port_task, delay);
 }
 
 /**
@@ -1309,32 +1303,9 @@ void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
  */
 void ata_port_flush_task(struct ata_port *ap)
 {
-	unsigned long flags;
-
 	DPRINTK("ENTER\n");
 
-	spin_lock_irqsave(ap->lock, flags);
-	ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK;
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	DPRINTK("flush #1\n");
-	cancel_work_sync(&ap->port_task.work); /* akpm: seems unneeded */
-
-	/*
-	 * At this point, if a task is running, it's guaranteed to see
-	 * the FLUSH flag; thus, it will never queue pio tasks again.
-	 * Cancel and flush.
-	 */
-	if (!cancel_delayed_work(&ap->port_task)) {
-		if (ata_msg_ctl(ap))
-			ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n",
-					__FUNCTION__);
-		cancel_work_sync(&ap->port_task.work);
-	}
-
-	spin_lock_irqsave(ap->lock, flags);
-	ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK;
-	spin_unlock_irqrestore(ap->lock, flags);
+	cancel_rearming_delayed_work(&ap->port_task);
 
 	if (ata_msg_ctl(ap))
 		ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__);
@@ -1814,7 +1785,7 @@ static void ata_dev_config_ncq(struct ata_device *dev,
 		desc[0] = '\0';
 		return;
 	}
-	if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) {
+	if (dev->horkage & ATA_HORKAGE_NONCQ) {
 		snprintf(desc, desc_sz, "NCQ (not used)");
 		return;
 	}
@@ -1845,7 +1816,8 @@ static void ata_dev_config_ncq(struct ata_device *dev,
 int ata_dev_configure(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->ap;
-	int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
+	struct ata_eh_context *ehc = &ap->eh_context;
+	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
 	const u16 *id = dev->id;
 	unsigned int xfer_mask;
 	char revbuf[7];		/* XYZ-99\0 */
@@ -1862,15 +1834,13 @@ int ata_dev_configure(struct ata_device *dev)
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
 
-	/* set _SDD */
-	rc = ata_acpi_push_id(dev);
-	if (rc) {
-		ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n",
-			rc);
-	}
+	/* set horkage */
+	dev->horkage |= ata_dev_blacklisted(dev);
 
-	/* retrieve and execute the ATA task file of _GTF */
-	ata_acpi_exec_tfs(ap);
+	/* let ACPI work its magic */
+	rc = ata_acpi_on_devcfg(dev);
+	if (rc)
+		return rc;
 
 	/* print device capabilities */
 	if (ata_msg_probe(ap))
@@ -2042,7 +2012,7 @@ int ata_dev_configure(struct ata_device *dev)
 		dev->max_sectors = ATA_MAX_SECTORS;
 	}
 
-	if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+	if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
@@ -3194,9 +3164,6 @@ void ata_bus_reset(struct ata_port *ap)
 	if ((slave_possible) && (err != 0x81))
 		ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
 
-	/* re-enable interrupts */
-	ap->ops->irq_on(ap);
-
 	/* is double-select really necessary? */
 	if (ap->device[1].class != ATA_DEV_NONE)
 		ap->ops->dev_select(ap, 1);
@@ -3359,7 +3326,7 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline)
 		return 0;
 
 	/* if SATA, resume phy */
-	if (ap->cbl == ATA_CBL_SATA) {
+	if (ap->flags & ATA_FLAG_SATA) {
 		rc = sata_phy_resume(ap, timing, deadline);
 		/* whine about phy resume failure but proceed */
 		if (rc && rc != -EOPNOTSUPP)
@@ -3581,10 +3548,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
 	if (sata_scr_read(ap, SCR_ERROR, &serror) == 0)
 		sata_scr_write(ap, SCR_ERROR, serror);
 
-	/* re-enable interrupts */
-	if (!ap->ops->error_handler)
-		ap->ops->irq_on(ap);
-
 	/* is double-select really necessary? */
 	if (classes[0] != ATA_DEV_NONE)
 		ap->ops->dev_select(ap, 1);
@@ -3774,6 +3737,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SAMSUNG CD-ROM SN-124","N001",	ATA_HORKAGE_NODMA },
 	{ "Seagate STT20000A", NULL,		ATA_HORKAGE_NODMA },
 	{ "IOMEGA  ZIP 250       ATAPI", NULL,	ATA_HORKAGE_NODMA }, /* temporary fix */
+	{ "IOMEGA  ZIP 250       ATAPI       Floppy",
+				NULL,		ATA_HORKAGE_NODMA },
 
 	/* Weird ATAPI devices */
 	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
@@ -3787,7 +3752,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "FUJITSU MHT2060BH",	NULL,		ATA_HORKAGE_NONCQ },
 	/* NCQ is broken */
 	{ "Maxtor 6L250S0",     "BANC1G10",     ATA_HORKAGE_NONCQ },
+	{ "Maxtor 6B200M0",	"BANC1BM0",	ATA_HORKAGE_NONCQ },
 	{ "Maxtor 6B200M0",	"BANC1B10",	ATA_HORKAGE_NONCQ },
+	{ "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
+	 ATA_HORKAGE_NONCQ },
 	/* NCQ hard hangs device under heavier load, needs hard power cycle */
 	{ "Maxtor 6B250S0",	"BANC1B70",	ATA_HORKAGE_NONCQ },
 	/* Blacklist entries taken from Silicon Image 3124/3132
@@ -3800,6 +3768,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "HTS541612J9SA00",	"SBDIC7JP",	ATA_HORKAGE_NONCQ, },
 	{ "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
 	{ "WDC WD740ADFD-00NLR1", NULL,		ATA_HORKAGE_NONCQ, },
+	{ "FUJITSU MHV2080BH",	"00840028",	ATA_HORKAGE_NONCQ, },
 
 	/* Devices with NCQ limits */
 
@@ -3807,7 +3776,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ }
 };
 
-unsigned long ata_device_blacklisted(const struct ata_device *dev)
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
 {
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
 	unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
@@ -3837,7 +3806,7 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
 	if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
 	    (dev->flags & ATA_DFLAG_CDB_INTR))
 		return 1;
-	return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0;
+	return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
 }
 
 /**
@@ -4107,6 +4076,68 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
 }
 
 /**
+ *	ata_fill_sg_dumb - Fill PCI IDE PRD table
+ *	@qc: Metadata associated with taskfile to be transferred
+ *
+ *	Fill PCI IDE PRD (scatter-gather) table with segments
+ *	associated with the current disk command. Perform the fill
+ *	so that we avoid writing any length 64K records for
+ *	controllers that don't follow the spec.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct scatterlist *sg;
+	unsigned int idx;
+
+	WARN_ON(qc->__sg == NULL);
+	WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
+
+	idx = 0;
+	ata_for_each_sg(sg, qc) {
+		u32 addr, offset;
+		u32 sg_len, len, blen;
+
+ 		/* determine if physical DMA addr spans 64K boundary.
+		 * Note h/w doesn't support 64-bit, so we unconditionally
+		 * truncate dma_addr_t to u32.
+		 */
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		while (sg_len) {
+			offset = addr & 0xffff;
+			len = sg_len;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			blen = len & 0xffff;
+			ap->prd[idx].addr = cpu_to_le32(addr);
+			if (blen == 0) {
+			   /* Some PATA chipsets like the CS5530 can't
+			      cope with 0x0000 meaning 64K as the spec says */
+				ap->prd[idx].flags_len = cpu_to_le32(0x8000);
+				blen = 0x8000;
+				ap->prd[++idx].addr = cpu_to_le32(addr + 0x8000);
+			}
+			ap->prd[idx].flags_len = cpu_to_le32(blen);
+			VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
+
+			idx++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	if (idx)
+		ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
  *	ata_check_atapi_dma - Check whether ATAPI DMA can be supported
  *	@qc: Metadata associated with taskfile to check
  *
@@ -4153,6 +4184,23 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
 	ata_fill_sg(qc);
 }
 
+/**
+ *	ata_dumb_qc_prep - Prepare taskfile for submission
+ *	@qc: Metadata associated with taskfile to be prepared
+ *
+ *	Prepare ATA taskfile for submission.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
+{
+	if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+		return;
+
+	ata_fill_sg_dumb(qc);
+}
+
 void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
 
 /**
@@ -5660,7 +5708,7 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance)
  */
 int sata_scr_valid(struct ata_port *ap)
 {
-	return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read;
+	return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read;
 }
 
 /**
@@ -6293,6 +6341,9 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	if (rc)
 		return rc;
 
+	/* associate with ACPI nodes */
+	ata_acpi_associate(host);
+
 	/* set cable, sata_spd_limit and report */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
@@ -6324,7 +6375,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 		if (!ata_port_is_dummy(ap))
 			ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p "
 					"ctl 0x%p bmdma 0x%p irq %d\n",
-					ap->cbl == ATA_CBL_SATA ? 'S' : 'P',
+					(ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
 					ata_mode_string(xfer_mask),
 					ap->ioaddr.cmd_addr,
 					ap->ioaddr.ctl_addr,
@@ -6479,13 +6530,7 @@ void ata_port_detach(struct ata_port *ap)
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	ata_port_wait_eh(ap);
-
-	/* Flush hotplug task.  The sequence is similar to
-	 * ata_port_flush_task().
-	 */
-	cancel_work_sync(&ap->hotplug_task.work); /* akpm: why? */
-	cancel_delayed_work(&ap->hotplug_task);
-	cancel_work_sync(&ap->hotplug_task.work);
+	cancel_rearming_delayed_work(&ap->hotplug_task);
 
  skip_eh:
 	/* remove the associated SCSI host */
@@ -6822,6 +6867,7 @@ EXPORT_SYMBOL_GPL(ata_do_set_mode);
 EXPORT_SYMBOL_GPL(ata_data_xfer);
 EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
 EXPORT_SYMBOL_GPL(ata_qc_prep);
+EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
 EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
 EXPORT_SYMBOL_GPL(ata_bmdma_setup);
 EXPORT_SYMBOL_GPL(ata_bmdma_start);
@@ -6873,7 +6919,6 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
-EXPORT_SYMBOL_GPL(ata_device_blacklisted);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
@@ -6882,9 +6927,9 @@ EXPORT_SYMBOL_GPL(ata_timing_merge);
 
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 #ifdef CONFIG_PM
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f7582c9c320e..9aa62a0754f6 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1897,6 +1897,57 @@ static int ata_eh_skip_recovery(struct ata_port *ap)
 	return 1;
 }
 
+static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
+{
+	struct ata_port *ap = dev->ap;
+	struct ata_eh_context *ehc = &ap->eh_context;
+
+	ehc->tries[dev->devno]--;
+
+	switch (err) {
+	case -ENODEV:
+		/* device missing or wrong IDENTIFY data, schedule probing */
+		ehc->i.probe_mask |= (1 << dev->devno);
+	case -EINVAL:
+		/* give it just one more chance */
+		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
+	case -EIO:
+		if (ehc->tries[dev->devno] == 1) {
+			/* This is the last chance, better to slow
+			 * down than lose it.
+			 */
+			sata_down_spd_limit(ap);
+			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+		}
+	}
+
+	if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
+		/* disable device if it has used up all its chances */
+		ata_dev_disable(dev);
+
+		/* detach if offline */
+		if (ata_port_offline(ap))
+			ata_eh_detach_dev(dev);
+
+		/* probe if requested */
+		if ((ehc->i.probe_mask & (1 << dev->devno)) &&
+		    !(ehc->did_probe_mask & (1 << dev->devno))) {
+			ata_eh_detach_dev(dev);
+			ata_dev_init(dev);
+
+			ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+			ehc->did_probe_mask |= (1 << dev->devno);
+			ehc->i.action |= ATA_EH_SOFTRESET;
+		}
+	} else {
+		/* soft didn't work?  be haaaaard */
+		if (ehc->i.flags & ATA_EHI_DID_RESET)
+			ehc->i.action |= ATA_EH_HARDRESET;
+		else
+			ehc->i.action |= ATA_EH_SOFTRESET;
+	}
+}
+
 /**
  *	ata_eh_recover - recover host port after error
  *	@ap: host port to recover
@@ -1997,50 +2048,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	goto out;
 
  dev_fail:
-	ehc->tries[dev->devno]--;
-
-	switch (rc) {
-	case -ENODEV:
-		/* device missing or wrong IDENTIFY data, schedule probing */
-		ehc->i.probe_mask |= (1 << dev->devno);
-	case -EINVAL:
-		/* give it just one more chance */
-		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
-	case -EIO:
-		if (ehc->tries[dev->devno] == 1) {
-			/* This is the last chance, better to slow
-			 * down than lose it.
-			 */
-			sata_down_spd_limit(ap);
-			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
-		}
-	}
-
-	if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
-		/* disable device if it has used up all its chances */
-		ata_dev_disable(dev);
-
-		/* detach if offline */
-		if (ata_port_offline(ap))
-			ata_eh_detach_dev(dev);
-
-		/* probe if requested */
-		if ((ehc->i.probe_mask & (1 << dev->devno)) &&
-		    !(ehc->did_probe_mask & (1 << dev->devno))) {
-			ata_eh_detach_dev(dev);
-			ata_dev_init(dev);
-
-			ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
-			ehc->did_probe_mask |= (1 << dev->devno);
-			ehc->i.action |= ATA_EH_SOFTRESET;
-		}
-	} else {
-		/* soft didn't work?  be haaaaard */
-		if (ehc->i.flags & ATA_EHI_DID_RESET)
-			ehc->i.action |= ATA_EH_HARDRESET;
-		else
-			ehc->i.action |= ATA_EH_SOFTRESET;
-	}
+	ata_eh_handle_dev_fail(dev, rc);
 
 	if (ata_port_nr_enabled(ap)) {
 		ata_port_printk(ap, KERN_WARNING, "failed to recover some "
@@ -2154,19 +2162,25 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
 
 	WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
 
+	/* tell ACPI we're suspending */
+	rc = ata_acpi_on_suspend(ap);
+	if (rc)
+		goto out;
+
 	/* suspend */
 	ata_eh_freeze_port(ap);
 
 	if (ap->ops->port_suspend)
 		rc = ap->ops->port_suspend(ap, ap->pm_mesg);
 
+ out:
 	/* report result */
 	spin_lock_irqsave(ap->lock, flags);
 
 	ap->pflags &= ~ATA_PFLAG_PM_PENDING;
 	if (rc == 0)
 		ap->pflags |= ATA_PFLAG_SUSPENDED;
-	else
+	else if (ap->pflags & ATA_PFLAG_FROZEN)
 		ata_port_schedule_eh(ap);
 
 	if (ap->pm_result) {
@@ -2207,6 +2221,9 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 	if (ap->ops->port_resume)
 		rc = ap->ops->port_resume(ap);
 
+	/* tell ACPI that we're resuming */
+	ata_acpi_on_resume(ap);
+
 	/* report result */
 	spin_lock_irqsave(ap->lock, flags);
 	ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 4ddf00c8c5f5..cfde22da07ac 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2620,7 +2620,7 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
 			ata_dev_printk(dev, KERN_WARNING,
 				       "invalid multi_count %u ignored\n",
 				       multi_count);
-	}	
+	}
 
 	/* READ/WRITE LONG use a non-standard sect_size */
 	qc->sect_size = ATA_SECT_SIZE;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index fa1c22c7b38f..ca7d2245d684 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -604,13 +604,17 @@ int ata_pci_init_bmdma(struct ata_host *host)
 }
 
 /**
- *	ata_pci_init_native_host - acquire native ATA resources and init host
+ *	ata_pci_init_sff_host - acquire native PCI ATA resources and init host
  *	@host: target ATA host
  *
  *	Acquire native PCI ATA resources for @host and initialize the
  *	first two ports of @host accordingly.  Ports marked dummy are
  *	skipped and allocation failure makes the port dummy.
  *
+ *	Note that native PCI resources are valid even for legacy hosts
+ *	as we fix up pdev resources array early in boot, so this
+ *	function can be used for both native and legacy SFF hosts.
+ *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
  *
@@ -618,7 +622,7 @@ int ata_pci_init_bmdma(struct ata_host *host)
  *	0 if at least one port is initialized, -ENODEV if no port is
  *	available.
  */
-int ata_pci_init_native_host(struct ata_host *host)
+int ata_pci_init_sff_host(struct ata_host *host)
 {
 	struct device *gdev = host->dev;
 	struct pci_dev *pdev = to_pci_dev(gdev);
@@ -673,7 +677,7 @@ int ata_pci_init_native_host(struct ata_host *host)
 }
 
 /**
- *	ata_pci_prepare_native_host - helper to prepare native PCI ATA host
+ *	ata_pci_prepare_sff_host - helper to prepare native PCI ATA host
  *	@pdev: target PCI device
  *	@ppi: array of port_info, must be enough for two ports
  *	@r_host: out argument for the initialized ATA host
@@ -687,9 +691,9 @@ int ata_pci_init_native_host(struct ata_host *host)
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_pci_prepare_native_host(struct pci_dev *pdev,
-				const struct ata_port_info * const * ppi,
-				struct ata_host **r_host)
+int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+			     const struct ata_port_info * const * ppi,
+			     struct ata_host **r_host)
 {
 	struct ata_host *host;
 	int rc;
@@ -705,7 +709,7 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev,
 		goto err_out;
 	}
 
-	rc = ata_pci_init_native_host(host);
+	rc = ata_pci_init_sff_host(host);
 	if (rc)
 		goto err_out;
 
@@ -730,221 +734,6 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev,
 	return rc;
 }
 
-struct ata_legacy_devres {
-	unsigned int	mask;
-	unsigned long	cmd_port[2];
-	void __iomem *	cmd_addr[2];
-	void __iomem *	ctl_addr[2];
-	unsigned int	irq[2];
-	void *		irq_dev_id[2];
-};
-
-static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr)
-{
-	int i;
-
-	for (i = 0; i < 2; i++) {
-		if (!legacy_dr->irq[i])
-			continue;
-
-		free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]);
-		legacy_dr->irq[i] = 0;
-		legacy_dr->irq_dev_id[i] = NULL;
-	}
-}
-
-static void ata_legacy_release(struct device *gdev, void *res)
-{
-	struct ata_legacy_devres *this = res;
-	int i;
-
-	ata_legacy_free_irqs(this);
-
-	for (i = 0; i < 2; i++) {
-		if (this->cmd_addr[i])
-			ioport_unmap(this->cmd_addr[i]);
-		if (this->ctl_addr[i])
-			ioport_unmap(this->ctl_addr[i]);
-		if (this->cmd_port[i])
-			release_region(this->cmd_port[i], 8);
-	}
-}
-
-static int ata_init_legacy_port(struct ata_port *ap,
-				struct ata_legacy_devres *legacy_dr)
-{
-	struct ata_host *host = ap->host;
-	int port_no = ap->port_no;
-	unsigned long cmd_port, ctl_port;
-
-	if (port_no == 0) {
-		cmd_port = ATA_PRIMARY_CMD;
-		ctl_port = ATA_PRIMARY_CTL;
-	} else {
-		cmd_port = ATA_SECONDARY_CMD;
-		ctl_port = ATA_SECONDARY_CTL;
-	}
-
-	/* request cmd_port */
-	if (request_region(cmd_port, 8, "libata"))
-		legacy_dr->cmd_port[port_no] = cmd_port;
-	else {
-		dev_printk(KERN_WARNING, host->dev,
-			   "0x%0lX IDE port busy\n", cmd_port);
-		return -EBUSY;
-	}
-
-	/* iomap cmd and ctl ports */
-	legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8);
-	legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1);
-	if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) {
-		dev_printk(KERN_WARNING, host->dev,
-			   "failed to map cmd/ctl ports\n");
-		return -ENOMEM;
-	}
-
-	/* init IO addresses */
-	ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no];
-	ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no];
-	ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no];
-	ata_std_ports(&ap->ioaddr);
-
-	return 0;
-}
-
-/**
- *	ata_init_legacy_host - acquire legacy ATA resources and init ATA host
- *	@host: target ATA host
- *	@was_busy: out parameter, indicates whether any port was busy
- *
- *	Acquire legacy ATA resources for the first two ports of @host
- *	and initialize it accordingly.  Ports marked dummy are skipped
- *	and resource acquistion failure makes the port dummy.
- *
- *	LOCKING:
- *	Inherited from calling layer (may sleep).
- *
- *	RETURNS:
- *	0 if at least one port is initialized, -ENODEV if no port is
- *	available.
- */
-static int ata_init_legacy_host(struct ata_host *host, int *was_busy)
-{
-	struct device *gdev = host->dev;
-	struct ata_legacy_devres *legacy_dr;
-	int i, rc;
-
-	if (!devres_open_group(gdev, NULL, GFP_KERNEL))
-		return -ENOMEM;
-
-	rc = -ENOMEM;
-	legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr),
-				 GFP_KERNEL);
-	if (!legacy_dr)
-		goto err_out;
-	devres_add(gdev, legacy_dr);
-
-	for (i = 0; i < 2; i++) {
-		if (ata_port_is_dummy(host->ports[i]))
-			continue;
-
-		rc = ata_init_legacy_port(host->ports[i], legacy_dr);
-		if (rc == 0)
-			legacy_dr->mask |= 1 << i;
-		else {
-			if (rc == -EBUSY)
-				(*was_busy)++;
-			host->ports[i]->ops = &ata_dummy_port_ops;
-		}
-	}
-
-	if (!legacy_dr->mask) {
-		dev_printk(KERN_ERR, gdev, "no available legacy port\n");
-		return -ENODEV;
-	}
-
-	devres_remove_group(gdev, NULL);
-	return 0;
-
- err_out:
-	devres_release_group(gdev, NULL);
-	return rc;
-}
-
-/**
- *	ata_request_legacy_irqs - request legacy ATA IRQs
- *	@host: target ATA host
- *	@handler: array of IRQ handlers
- *	@irq_flags: array of IRQ flags
- *	@dev_id: array of IRQ dev_ids
- *
- *	Request legacy IRQs for non-dummy legacy ports in @host.  All
- *	IRQ parameters are passed as array to allow ports to have
- *	separate IRQ handlers.
- *
- *	LOCKING:
- *	Inherited from calling layer (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-static int ata_request_legacy_irqs(struct ata_host *host,
-				   irq_handler_t const *handler,
-				   const unsigned int *irq_flags,
-				   void * const *dev_id)
-{
-	struct device *gdev = host->dev;
-	struct ata_legacy_devres *legacy_dr;
-	int i, rc;
-
-	legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL);
-	BUG_ON(!legacy_dr);
-
-	for (i = 0; i < 2; i++) {
-		unsigned int irq;
-
-		/* FIXME: ATA_*_IRQ() should take generic device not pci_dev */
-		if (i == 0)
-			irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev));
-		else
-			irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev));
-
-		if (!(legacy_dr->mask & (1 << i)))
-			continue;
-
-		if (!handler[i]) {
-			dev_printk(KERN_ERR, gdev,
-				   "NULL handler specified for port %d\n", i);
-			rc = -EINVAL;
-			goto err_out;
-		}
-
-		rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME,
-				 dev_id[i]);
-		if (rc) {
-			dev_printk(KERN_ERR, gdev,
-				"irq %u request failed (errno=%d)\n", irq, rc);
-			goto err_out;
-		}
-
-		/* record irq allocation in legacy_dr */
-		legacy_dr->irq[i] = irq;
-		legacy_dr->irq_dev_id[i] = dev_id[i];
-
-		/* only used to print info */
-		if (i == 0)
-			host->irq = irq;
-		else
-			host->irq2 = irq;
-	}
-
-	return 0;
-
- err_out:
-	ata_legacy_free_irqs(legacy_dr);
-	return rc;
-}
-
 /**
  *	ata_pci_init_one - Initialize/register PCI IDE host controller
  *	@pdev: Controller to be initialized
@@ -1029,35 +818,11 @@ int ata_pci_init_one(struct pci_dev *pdev,
 #endif
 	}
 
-	/* alloc and init host */
-	host = ata_host_alloc_pinfo(dev, ppi, 2);
-	if (!host) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "failed to allocate ATA host\n");
-		rc = -ENOMEM;
+	/* prepare host */
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	if (rc)
 		goto err_out;
-	}
 
-	if (!legacy_mode) {
-		rc = ata_pci_init_native_host(host);
-		if (rc)
-			goto err_out;
-	} else {
-		int was_busy = 0;
-
-		rc = ata_init_legacy_host(host, &was_busy);
-		if (was_busy)
-			pcim_pin_device(pdev);
-		if (rc)
-			goto err_out;
-
-		/* request respective PCI regions, may fail */
-		rc = pci_request_region(pdev, 1, DRV_NAME);
-		rc = pci_request_region(pdev, 3, DRV_NAME);
-	}
-
-	/* init BMDMA, may fail */
-	ata_pci_init_bmdma(host);
 	pci_set_master(pdev);
 
 	/* start host and request IRQ */
@@ -1068,17 +833,28 @@ int ata_pci_init_one(struct pci_dev *pdev,
 	if (!legacy_mode) {
 		rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
 				      IRQF_SHARED, DRV_NAME, host);
+		if (rc)
+			goto err_out;
 		host->irq = pdev->irq;
 	} else {
-		irq_handler_t handler[2] = { host->ops->irq_handler,
-					     host->ops->irq_handler };
-		unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
-		void *dev_id[2] = { host, host };
+		if (!ata_port_is_dummy(host->ports[0])) {
+			host->irq = ATA_PRIMARY_IRQ(pdev);
+			rc = devm_request_irq(dev, host->irq,
+					      pi->port_ops->irq_handler,
+					      IRQF_SHARED, DRV_NAME, host);
+			if (rc)
+				goto err_out;
+		}
 
-		rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
+		if (!ata_port_is_dummy(host->ports[1])) {
+			host->irq2 = ATA_SECONDARY_IRQ(pdev);
+			rc = devm_request_irq(dev, host->irq2,
+					      pi->port_ops->irq_handler,
+					      IRQF_SHARED, DRV_NAME, host);
+			if (rc)
+				goto err_out;
+		}
 	}
-	if (rc)
-		goto err_out;
 
 	/* register */
 	rc = ata_host_register(host, pi->sht);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 5e2466658420..ba17fc5f2e99 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -98,17 +98,15 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
-extern int ata_acpi_exec_tfs(struct ata_port *ap);
-extern int ata_acpi_push_id(struct ata_device *dev);
+extern void ata_acpi_associate(struct ata_host *host);
+extern int ata_acpi_on_suspend(struct ata_port *ap);
+extern void ata_acpi_on_resume(struct ata_port *ap);
+extern int ata_acpi_on_devcfg(struct ata_device *adev);
 #else
-static inline int ata_acpi_exec_tfs(struct ata_port *ap)
-{
-	return 0;
-}
-static inline int ata_acpi_push_id(struct ata_device *dev)
-{
-	return 0;
-}
+static inline void ata_acpi_associate(struct ata_host *host) { }
+static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
+static inline void ata_acpi_on_resume(struct ata_port *ap) { }
+static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
 #endif
 
 /* libata-scsi.c */
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 75e95bdbe02f..010436795d20 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -455,23 +455,21 @@ static struct ata_port_operations ali_c5_port_ops = {
 
 static void ali_init_chipset(struct pci_dev *pdev)
 {
-	u8 rev, tmp;
+	u8 tmp;
 	struct pci_dev *north, *isa_bridge;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
 	/*
 	 * The chipset revision selects the driver operations and
 	 * mode data.
 	 */
 
-	if (rev >= 0x20 && rev < 0xC2) {
+	if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
 		/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
 		pci_read_config_byte(pdev, 0x4B, &tmp);
 		/* Clear CD-ROM DMA write bit */
 		tmp &= 0x7F;
 		pci_write_config_byte(pdev, 0x4B, tmp);
-	} else if (rev >= 0xC2) {
+	} else if (pdev->revision >= 0xC2) {
 		/* Enable cable detection logic */
 		pci_read_config_byte(pdev, 0x4B, &tmp);
 		pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
@@ -483,21 +481,21 @@ static void ali_init_chipset(struct pci_dev *pdev)
 		/* Configure the ALi bridge logic. For non ALi rely on BIOS.
 		   Set the south bridge enable bit */
 		pci_read_config_byte(isa_bridge, 0x79, &tmp);
-		if (rev == 0xC2)
+		if (pdev->revision == 0xC2)
 			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
-		else if (rev > 0xC2 && rev < 0xC5)
+		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
 			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
 	}
-	if (rev >= 0x20) {
+	if (pdev->revision >= 0x20) {
 		/*
 		 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
 		 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
 		 * via 0x54/55.
 		 */
 		pci_read_config_byte(pdev, 0x53, &tmp);
-		if (rev <= 0x20)
+		if (pdev->revision <= 0x20)
 			tmp &= ~0x02;
-		if (rev >= 0xc7)
+		if (pdev->revision >= 0xc7)
 			tmp |= 0x03;
 		else
 			tmp |= 0x01;	/* CD_ROM enable for DMA */
@@ -520,14 +518,14 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_early = {
 		.sht = &ali_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &ali_early_port_ops
 	};
 	/* Revision 0x20 added DMA */
 	static const struct ata_port_info info_20 = {
 		.sht = &ali_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &ali_20_port_ops
@@ -535,7 +533,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Revision 0x20 with support logic added UDMA */
 	static const struct ata_port_info info_20_udma = {
 		.sht = &ali_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x07,	/* UDMA33 */
@@ -544,60 +542,58 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Revision 0xC2 adds UDMA66 */
 	static const struct ata_port_info info_c2 = {
 		.sht = &ali_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x1f,
+		.udma_mask = ATA_UDMA4,
 		.port_ops = &ali_c2_port_ops
 	};
 	/* Revision 0xC3 is UDMA66 for now */
 	static const struct ata_port_info info_c3 = {
 		.sht = &ali_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x1f,
+		.udma_mask = ATA_UDMA4,
 		.port_ops = &ali_c2_port_ops
 	};
 	/* Revision 0xC4 is UDMA100 */
 	static const struct ata_port_info info_c4 = {
 		.sht = &ali_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST | ATA_FLAG_PIO_LBA48,
+		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &ali_c2_port_ops
 	};
 	/* Revision 0xC5 is UDMA133 with LBA48 DMA */
 	static const struct ata_port_info info_c5 = {
 		.sht = &ali_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x7f,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &ali_c5_port_ops
 	};
 
 	const struct ata_port_info *ppi[] = { NULL, NULL };
-	u8 rev, tmp;
+	u8 tmp;
 	struct pci_dev *isa_bridge;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
 	/*
 	 * The chipset revision selects the driver operations and
 	 * mode data.
 	 */
 
-	if (rev < 0x20) {
+	if (pdev->revision < 0x20) {
 		ppi[0] = &info_early;
-	} else if (rev < 0xC2) {
+	} else if (pdev->revision < 0xC2) {
         	ppi[0] = &info_20;
-	} else if (rev == 0xC2) {
+	} else if (pdev->revision == 0xC2) {
         	ppi[0] = &info_c2;
-	} else if (rev == 0xC3) {
+	} else if (pdev->revision == 0xC3) {
         	ppi[0] = &info_c3;
-	} else if (rev == 0xC4) {
+	} else if (pdev->revision == 0xC4) {
         	ppi[0] = &info_c4;
 	} else
         	ppi[0] = &info_c5;
@@ -605,7 +601,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ali_init_chipset(pdev);
 
 	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-	if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+	if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
 		/* Are we paired with a UDMA capable chip */
 		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index a16f629b7b38..b09facad63e1 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -541,7 +541,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct ata_port_info info[10] = {
 		{	/* 0: AMD 7401 */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,	/* No SWDMA */
 			.udma_mask = 0x07,	/* UDMA 33 */
@@ -549,91 +549,89 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		},
 		{	/* 1: Early AMD7409 - no swdma */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x1f,	/* UDMA 66 */
+			.udma_mask = ATA_UDMA4,	/* UDMA 66 */
 			.port_ops = &amd66_port_ops
 		},
 		{	/* 2: AMD 7409, no swdma errata */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x1f,	/* UDMA 66 */
+			.udma_mask = ATA_UDMA4,	/* UDMA 66 */
 			.port_ops = &amd66_port_ops
 		},
 		{	/* 3: AMD 7411 */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x3f,	/* UDMA 100 */
+			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
 			.port_ops = &amd100_port_ops
 		},
 		{	/* 4: AMD 7441 */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x3f,	/* UDMA 100 */
+			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
 			.port_ops = &amd100_port_ops
 		},
 		{	/* 5: AMD 8111*/
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x7f,	/* UDMA 133, no swdma */
+			.udma_mask = ATA_UDMA6,	/* UDMA 133, no swdma */
 			.port_ops = &amd133_port_ops
 		},
 		{	/* 6: AMD 8111 UDMA 100 (Serenade) */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x3f,	/* UDMA 100, no swdma */
+			.udma_mask = ATA_UDMA5,	/* UDMA 100, no swdma */
 			.port_ops = &amd133_port_ops
 		},
 		{	/* 7: Nvidia Nforce */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x3f,	/* UDMA 100 */
+			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
 			.port_ops = &nv100_port_ops
 		},
 		{	/* 8: Nvidia Nforce2 and later */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x7f,	/* UDMA 133, no swdma */
+			.udma_mask = ATA_UDMA6,	/* UDMA 133, no swdma */
 			.port_ops = &nv133_port_ops
 		},
 		{	/* 9: AMD CS5536 (Geode companion) */
 			.sht = &amd_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x3f,	/* UDMA 100 */
+			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
 			.port_ops = &amd100_port_ops
 		}
 	};
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	static int printed_version;
 	int type = id->driver_data;
-	u8 rev;
 	u8 fifo;
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 	pci_read_config_byte(pdev, 0x41, &fifo);
 
 	/* Check for AMD7409 without swdma errata and if found adjust type */
-	if (type == 1 && rev > 0x7)
+	if (type == 1 && pdev->revision > 0x7)
 		type = 2;
 
 	/* Check for AMD7411 */
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 03b6ddd2abd2..ce589d96ca42 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -416,7 +416,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 	static int printed_version;
 	static const struct ata_port_info info_6210 = {
 		.sht		= &artop_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask 	= ATA_UDMA2,
@@ -424,7 +424,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	static const struct ata_port_info info_626x = {
 		.sht		= &artop_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask 	= ATA_UDMA4,
@@ -432,7 +432,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 	};
 	static const struct ata_port_info info_626x_fast = {
 		.sht		= &artop_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
 		.udma_mask 	= ATA_UDMA5,
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 844914681a2a..80509be49e7a 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -270,7 +270,7 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &atiixp_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x06,	/* No MWDMA0 support */
 		.udma_mask = 0x3F,
@@ -285,6 +285,7 @@ static const struct pci_device_id atiixp[] = {
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
 	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
+	{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
 
 	{ },
 };
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 31cbf8daa299..0feb5ae8c486 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -251,7 +251,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &cmd640_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &cmd640_port_ops
 	};
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 320a5b10aa98..dc443e7dc37c 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -380,21 +380,21 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct ata_port_info cmd_info[6] = {
 		{	/* CMD 643 - no UDMA */
 			.sht = &cmd64x_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with broken UDMA */
 			.sht = &cmd64x_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with working UDMA */
 			.sht = &cmd64x_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = ATA_UDMA1,
@@ -402,14 +402,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		},
 		{	/* CMD 646 rev 1  */
 			.sht = &cmd64x_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.port_ops = &cmd646r1_port_ops
 		},
 		{	/* CMD 648 */
 			.sht = &cmd64x_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = ATA_UDMA2,
@@ -417,7 +417,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		},
 		{	/* CMD 649 */
 			.sht = &cmd64x_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = ATA_UDMA3,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 00cf0134079c..6bf037d82b5a 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -146,7 +146,7 @@ static struct scsi_host_template cs5520_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
+	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
@@ -178,7 +178,7 @@ static struct ata_port_operations cs5520_port_ops = {
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
-	.qc_prep		= ata_qc_prep,
+	.qc_prep		= ata_dumb_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 	.data_xfer		= ata_data_xfer,
 
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 848f0309bf03..68f150a1e2f4 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -167,7 +167,7 @@ static struct scsi_host_template cs5530_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
+	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
@@ -201,7 +201,7 @@ static struct ata_port_operations cs5530_port_ops = {
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
 	.cable_detect	= ata_cable_40wire,
 
-	.qc_prep 	= ata_qc_prep,
+	.qc_prep 	= ata_dumb_qc_prep,
 	.qc_issue	= cs5530_qc_issue_prot,
 
 	.data_xfer	= ata_data_xfer,
@@ -266,7 +266,7 @@ static int cs5530_init_chip(void)
 	}
 
 	pci_set_master(cs5530_0);
-	pci_set_mwi(cs5530_0);
+	pci_try_set_mwi(cs5530_0);
 
 	/*
 	 * Set PCI CacheLineSize to 16-bytes:
@@ -337,7 +337,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &cs5530_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x07,
@@ -346,7 +346,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* The docking connector doesn't do UDMA, and it seems not MWDMA */
 	static const struct ata_port_info info_palmax_secondary = {
 		.sht = &cs5530_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &cs5530_port_ops
 	};
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index aa3256fb9f7a..360b6f32e17e 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -225,10 +225,10 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &cs5535_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x1f,
+		.udma_mask = ATA_UDMA4,
 		.port_ops = &cs5535_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index d41a7691dd8e..6cbc8778bf4f 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -167,7 +167,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 {
 	static const struct ata_port_info info = {
 		.sht = &cy82c693_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &cy82c693_port_ops
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 079248a9b460..c8ba59c56114 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -303,7 +303,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht		= &efar_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma1-2 */
 		.udma_mask 	= 0x0f, /* UDMA 66 */
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 0c9cb6090711..6f7d34ad19ef 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -393,10 +393,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_hpt366 = {
 		.sht = &hpt36x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x1f,
+		.udma_mask = ATA_UDMA4,
 		.port_ops = &hpt366_port_ops
 	};
 	struct ata_port_info info = info_hpt366;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index a8c0cbeca399..b0af65aadde3 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -889,25 +889,25 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370 = {
 		.sht = &hpt37x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370_port_ops
 	};
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a = {
 		.sht = &hpt37x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370a_port_ops
 	};
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370_33 = {
 		.sht = &hpt37x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x0f,
@@ -916,7 +916,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a_33 = {
 		.sht = &hpt37x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x0f,
@@ -925,19 +925,19 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT371, 372 and friends - UDMA133 */
 	static const struct ata_port_info info_hpt372 = {
 		.sht = &hpt37x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x7f,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt372_port_ops
 	};
 	/* HPT374 - UDMA100 */
 	static const struct ata_port_info info_hpt374 = {
 		.sht = &hpt37x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt374_port_ops
 	};
 
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index e947433cb37d..aa29cde09f8b 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -490,10 +490,10 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT372N and friends - UDMA133 */
 	static const struct ata_port_info info = {
 		.sht = &hpt3x2n_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x7f,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt3x2n_port_ops
 	};
 	struct ata_port_info port = info;
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 8ce5e23a5f75..be0f05efac6d 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x3"
-#define DRV_VERSION	"0.4.3"
+#define DRV_VERSION	"0.5.3"
 
 /**
  *	hpt3x3_set_piomode		-	PIO setup
@@ -52,6 +52,7 @@ static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_dword(pdev, 0x48, r2);
 }
 
+#if defined(CONFIG_PATA_HPT3X3_DMA)
 /**
  *	hpt3x3_set_dmamode		-	DMA timing setup
  *	@ap: ATA interface
@@ -59,6 +60,9 @@ static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *
  *	Set up the channel for MWDMA or UDMA modes. Much the same as with
  *	PIO, load the mode number and then set MWDMA or UDMA flag.
+ *
+ *	0x44 : bit 0-2 master mode, 3-5 slave mode, etc
+ *	0x48 : bit 4/0 DMA/UDMA bit 5/1 for slave etc
  */
 
 static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
@@ -76,13 +80,26 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	r2 &= ~(0x11 << dn);	/* Clear MWDMA and UDMA bits */
 
 	if (adev->dma_mode >= XFER_UDMA_0)
-		r2 |= 0x01 << dn;	/* Ultra mode */
+		r2 |= (0x10 << dn);	/* Ultra mode */
 	else
-		r2 |= 0x10 << dn;	/* MWDMA */
+		r2 |= (0x01 << dn);	/* MWDMA */
 
 	pci_write_config_dword(pdev, 0x44, r1);
 	pci_write_config_dword(pdev, 0x48, r2);
 }
+#endif /* CONFIG_PATA_HPT3X3_DMA */
+
+/**
+ *	hpt3x3_atapi_dma	-	ATAPI DMA check
+ *	@qc: Queued command
+ *
+ *	Just say no - we don't do ATAPI DMA
+ */
+
+static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
+{
+	return 1;
+}
 
 static struct scsi_host_template hpt3x3_sht = {
 	.module			= THIS_MODULE,
@@ -105,7 +122,9 @@ static struct scsi_host_template hpt3x3_sht = {
 static struct ata_port_operations hpt3x3_port_ops = {
 	.port_disable	= ata_port_disable,
 	.set_piomode	= hpt3x3_set_piomode,
+#if defined(CONFIG_PATA_HPT3X3_DMA)
 	.set_dmamode	= hpt3x3_set_dmamode,
+#endif
 	.mode_filter	= ata_pci_default_filter,
 
 	.tf_load	= ata_tf_load,
@@ -124,6 +143,7 @@ static struct ata_port_operations hpt3x3_port_ops = {
 	.bmdma_start 	= ata_bmdma_start,
 	.bmdma_stop	= ata_bmdma_stop,
 	.bmdma_status 	= ata_bmdma_status,
+	.check_atapi_dma= hpt3x3_atapi_dma,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -158,32 +178,79 @@ static void hpt3x3_init_chipset(struct pci_dev *dev)
 		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 }
 
-
 /**
  *	hpt3x3_init_one		-	Initialise an HPT343/363
- *	@dev: PCI device
+ *	@pdev: PCI device
  *	@id: Entry in match table
  *
- *	Perform basic initialisation. The chip has a quirk that it won't
- *	function unless it is at XX00. The old ATA driver touched this up
- *	but we leave it for pci quirks to do properly.
+ *	Perform basic initialisation. We set the device up so we access all
+ *	ports via BAR4. This is neccessary to work around errata.
  */
 
-static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht = &hpt3x3_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
+#if defined(CONFIG_PATA_HPT3X3_DMA)
+		/* Further debug needed */
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x07,
+#endif
 		.port_ops = &hpt3x3_port_ops
 	};
+	/* Register offsets of taskfiles in BAR4 area */
+	static const u8 offset_cmd[2] = { 0x20, 0x28 };
+	static const u8 offset_ctl[2] = { 0x36, 0x3E };
 	const struct ata_port_info *ppi[] = { &info, NULL };
-
-	hpt3x3_init_chipset(dev);
-	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi);
+	struct ata_host *host;
+	int i, rc;
+	void __iomem *base;
+
+	hpt3x3_init_chipset(pdev);
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host)
+		return -ENOMEM;
+	/* acquire resources and fill host */
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	/* Everything is relative to BAR4 if we set up this way */
+	rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+	if (rc == -EBUSY)
+		pcim_pin_device(pdev);
+	if (rc)
+		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	base = host->iomap[4];	/* Bus mastering base */
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+		ioaddr->cmd_addr = base + offset_cmd[i];
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = base + offset_ctl[i];
+		ioaddr->scr_addr = NULL;
+		ata_std_ports(ioaddr);
+		ioaddr->bmdma_addr = base + 8 * i;
+	}
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &hpt3x3_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index c791a46df461..321d98b0bed2 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -530,7 +530,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
 
 		ap->pio_mask = 0x1f;
 		ap->mwdma_mask = info->mwdma_mask;
-		ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST;
+		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ops = &pata_icside_port_ops;
 
 		pata_icside_setup_ioaddr(&ap->ioaddr, info->base, info->port[i]);
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 95b0bb61788b..b8af55e89156 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -313,10 +313,10 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht		= &it8213_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask 	= 0x1f, /* UDMA 100 */
+		.udma_mask 	= ATA_UDMA4, /* FIXME: want UDMA 100? */
 		.port_ops	= &it8213_ops,
 	};
 	/* Current IT8213 stuff is single port */
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 12c6e08cc4d1..430673be1df7 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -587,8 +587,7 @@ static int it821x_port_start(struct ata_port *ap)
 	itdev->want[1][1] = ATA_ANY;
 	itdev->last_device = -1;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &conf);
-	if (conf == 0x10) {
+	if (pdev->revision == 0x11) {
 		itdev->timing10 = 1;
 		/* Need to disable ATAPI DMA for this case */
 		if (!itdev->smart)
@@ -714,17 +713,17 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	static const struct ata_port_info info_smart = {
 		.sht = &it821x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &it821x_smart_port_ops
 	};
 	static const struct ata_port_info info_passthru = {
 		.sht = &it821x_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x7f,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_passthru_port_ops
 	};
 
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 8d2bc1e9e871..4ca7fd6118d5 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -1,13 +1,14 @@
 /*
  * ixp4xx PATA/Compact Flash driver
- * Copyright (c) 2006 Tower Technologies
+ * Copyright (C) 2006-07 Tower Technologies
  * Author: Alessandro Zummo <a.zummo@towertech.it>
  *
  * An ATA driver to handle a Compact Flash connected
  * to the ixp4xx expansion bus in TrueIDE mode. The CF
  * must have it chip selects connected to two CS lines
- * on the ixp4xx. The interrupt line is optional, if not
- * specified the driver will run in polling mode.
+ * on the ixp4xx. In the irq is not available, you might
+ * want to modify both this driver and libata to run in
+ * polling mode.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -23,7 +24,7 @@
 #include <scsi/scsi_host.h>
 
 #define DRV_NAME	"pata_ixp4xx_cf"
-#define DRV_VERSION	"0.1.3"
+#define DRV_VERSION	"0.2"
 
 static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 {
@@ -42,13 +43,6 @@ static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 	return 0;
 }
 
-static void ixp4xx_phy_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	ata_port_probe(ap);
-	ata_bus_reset(ap);
-}
-
 static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
 				unsigned int buflen, int write_data)
 {
@@ -56,7 +50,7 @@ static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
 	unsigned int words = buflen >> 1;
 	u16 *buf16 = (u16 *) buf;
 	struct ata_port *ap = adev->ap;
-	void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr;
+	void __iomem *mmio = ap->ioaddr.data_addr;
 	struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
 
 	/* set the expansion bus in 16bit mode and restore
@@ -92,10 +86,6 @@ static void ixp4xx_mmio_data_xfer(struct ata_device *adev, unsigned char *buf,
 	*data->cs0_cfg |= 0x01;
 }
 
-static void ixp4xx_irq_clear(struct ata_port *ap)
-{
-}
-
 static struct scsi_host_template ixp4xx_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -115,29 +105,32 @@ static struct scsi_host_template ixp4xx_sht = {
 };
 
 static struct ata_port_operations ixp4xx_port_ops = {
-	.set_mode	= ixp4xx_set_mode,
-	.mode_filter	= ata_pci_default_filter,
-
-	.port_disable	= ata_port_disable,
-	.tf_load	= ata_tf_load,
-	.tf_read	= ata_tf_read,
-	.check_status 	= ata_check_status,
-	.exec_command	= ata_exec_command,
-	.dev_select 	= ata_std_dev_select,
-
-	.qc_prep 	= ata_qc_prep,
-	.qc_issue	= ata_qc_issue_prot,
-	.eng_timeout	= ata_eng_timeout,
-	.data_xfer	= ixp4xx_mmio_data_xfer,
-	.cable_detect	= ata_cable_40wire,
-
-	.irq_clear	= ixp4xx_irq_clear,
-	.irq_on		= ata_irq_on,
-	.irq_ack	= ata_irq_ack,
-
-	.port_start	= ata_port_start,
-
-	.phy_reset	= ixp4xx_phy_reset,
+	.set_mode		= ixp4xx_set_mode,
+	.mode_filter		= ata_pci_default_filter,
+
+	.port_disable		= ata_port_disable,
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.exec_command		= ata_exec_command,
+	.check_status 		= ata_check_status,
+	.dev_select 		= ata_std_dev_select,
+
+	.freeze			= ata_bmdma_freeze,
+	.thaw			= ata_bmdma_thaw,
+	.error_handler		= ata_bmdma_error_handler,
+	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+
+	.qc_prep 		= ata_qc_prep,
+	.qc_issue		= ata_qc_issue_prot,
+	.data_xfer		= ixp4xx_mmio_data_xfer,
+	.cable_detect		= ata_cable_40wire,
+
+	.irq_handler		= ata_interrupt,
+	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+	.irq_ack		= ata_dummy_irq_ack,
+
+	.port_start		= ata_port_start,
 };
 
 static void ixp4xx_setup_port(struct ata_ioports *ioaddr,
@@ -178,7 +171,6 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	struct ata_host *host;
 	struct ata_port *ap;
 	struct ixp4xx_pata_data *data = pdev->dev.platform_data;
-	int rc;
 
 	cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	cs1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -211,10 +203,6 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	ap->pio_mask = 0x1f; /* PIO4 */
 	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
 
-	/* run in polling mode if no irq has been assigned */
-	if (!irq)
-		ap->flags |= ATA_FLAG_PIO_POLLING;
-
 	ixp4xx_setup_port(&ap->ioaddr, data);
 
 	dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 2af7ff8256ca..4d67f238eee2 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -193,11 +193,11 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 {
 	static const struct ata_port_info info = {
 		.sht		= &jmicron_sht,
-		.flags	= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags	= ATA_FLAG_SLAVE_POSS,
 
 		.pio_mask	= 0x1f,
 		.mwdma_mask	= 0x07,
-		.udma_mask 	= 0x3f,
+		.udma_mask 	= ATA_UDMA5,
 
 		.port_ops	= &jmicron_ops,
 	};
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index edbfe0dbbf78..87594c04d3a3 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -163,22 +163,22 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 {
 	static const struct ata_port_info info = {
 		.sht		= &marvell_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 
 		.pio_mask	= 0x1f,
 		.mwdma_mask	= 0x07,
-		.udma_mask 	= 0x3f,
+		.udma_mask 	= ATA_UDMA5,
 
 		.port_ops	= &marvell_ops,
 	};
 	static const struct ata_port_info info_sata = {
 		.sht		= &marvell_sht,
 		/* Slave possible as its magically mapped not real */
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 
 		.pio_mask	= 0x1f,
 		.mwdma_mask	= 0x07,
-		.udma_mask 	= 0x7f,
+		.udma_mask 	= ATA_UDMA6,
 
 		.port_ops	= &marvell_ops,
 	};
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 368fac7d168b..182e83c9047b 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -467,13 +467,27 @@ mpc52xx_ata_remove(struct of_device *op)
 static int
 mpc52xx_ata_suspend(struct of_device *op, pm_message_t state)
 {
-	return 0;	/* FIXME : What to do here ? */
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+
+	return ata_host_suspend(host, state);
 }
 
 static int
 mpc52xx_ata_resume(struct of_device *op)
 {
-	return 0;	/* FIXME : What to do here ? */
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+	struct mpc52xx_ata_priv *priv = host->private_data;
+	int rv;
+
+	rv = mpc52xx_ata_hw_init(priv);
+	if (rv) {
+		printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+		return rv;
+	}
+
+	ata_host_resume(host);
+
+	return 0;
 }
 
 #endif
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 81f563458666..40eb574828bf 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -94,12 +94,12 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht		= &netcell_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		/* Actually we don't really care about these as the
 		   firmware deals with it */
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask 	= 0x3f, /* UDMA 133 */
+		.udma_mask 	= ATA_UDMA5, /* UDMA 133 */
 		.port_ops	= &netcell_ops,
 	};
 	const struct ata_port_info *port_info[] = { &info, NULL };
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index ea70ec744879..2f5d714ebfc4 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -193,7 +193,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &ns87410_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x0F,
 		.port_ops = &ns87410_port_ops
 	};
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 29c23ddd6550..091a70a0ef1c 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -291,7 +291,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht		= &oldpiix_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma1-2 */
 		.port_ops	= &oldpiix_pata_ops,
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 1c44653e1e06..458bf67f766f 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -218,7 +218,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &opti_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &opti_port_ops
 	};
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 3093b02286ce..f89bdfde16d0 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -484,14 +484,14 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_82c700 = {
 		.sht = &optidma_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &optidma_port_ops
 	};
 	static const struct ata_port_info info_82c700_udma = {
 		.sht = &optidma_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x07,
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index d277246b7337..92447bed5e77 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -320,7 +320,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	static const struct ata_port_info info[3] = {
 		{
 			.sht = &pdc202xx_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = ATA_UDMA2,
@@ -328,7 +328,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 		},
 		{
 			.sht = &pdc202xx_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = ATA_UDMA4,
@@ -336,7 +336,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 		},
 		{
 			.sht = &pdc202xx_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = ATA_UDMA5,
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index cbb7866940d6..79f841bca593 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -139,6 +139,7 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
 	struct resource *io_res, *ctl_res;
 	struct ata_host *host;
 	struct ata_port *ap;
+	struct pata_platform_info *pp_info;
 	unsigned int mmio;
 
 	/*
@@ -208,11 +209,12 @@ static int __devinit pata_platform_probe(struct platform_device *pdev)
 
 	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
 
-	pata_platform_setup_port(&ap->ioaddr, pdev->dev.platform_data);
+	pp_info = (struct pata_platform_info *)(pdev->dev.platform_data);
+	pata_platform_setup_port(&ap->ioaddr, pp_info);
 
 	/* activate */
 	return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt,
-				 0, &pata_platform_sht);
+				 pp_info->irq_flags, &pata_platform_sht);
 }
 
 /**
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index ba96b54f5b87..7d1aabed422d 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -257,7 +257,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht		= &radisys_sht,
-		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma1-2 */
 		.udma_mask	= 0x14, /* UDMA33/66 only */
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index a3488b41ad26..7632fcb070ca 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -133,7 +133,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht = &rz1000_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &rz1000_port_ops
 	};
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 1233063ab9a8..b8b2d11e4180 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -185,7 +185,7 @@ static struct scsi_host_template sc1200_sht = {
 	.queuecommand		= ata_scsi_queuecmd,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
-	.sg_tablesize		= LIBATA_MAX_PRD,
+	.sg_tablesize		= LIBATA_DUMB_MAX_PRD,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
@@ -219,7 +219,7 @@ static struct ata_port_operations sc1200_port_ops = {
 	.bmdma_stop	= ata_bmdma_stop,
 	.bmdma_status 	= ata_bmdma_status,
 
-	.qc_prep 	= ata_qc_prep,
+	.qc_prep 	= ata_dumb_qc_prep,
 	.qc_issue	= sc1200_qc_issue_prot,
 
 	.data_xfer	= ata_data_xfer,
@@ -245,7 +245,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &sc1200_sht,
-		.flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x07,
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 61502bc7bf1d..c55667e0eb65 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -238,6 +238,12 @@ static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	else
 		offset = 0;	/* 100MHz */
 
+	/* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
+	if (adev->class == ATA_DEV_ATAPI && speed > XFER_UDMA_4) {
+		printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
+		speed = XFER_UDMA_4;
+	}
+
 	if (speed >= XFER_UDMA_0)
 		idx = speed - XFER_UDMA_0;
 	else
@@ -724,22 +730,36 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
 
 static u8 scc_bmdma_status (struct ata_port *ap)
 {
-	u8 host_stat;
 	void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
-	host_stat = in_be32(mmio + SCC_DMA_STATUS);
-
-	/* Workaround for PTERADD: emulate DMA_INTR when
-	 * - IDE_STATUS[ERR] = 1
-	 * - INT_STATUS[INTRQ] = 1
-	 * - DMA_STATUS[IORACTA] = 1
-	 */
-	if (!(host_stat & ATA_DMA_INTR)) {
-		u32 int_status = in_be32(mmio + SCC_DMA_INTST);
-		if (ata_altstatus(ap) & ATA_ERR &&
-		    int_status & INTSTS_INTRQ &&
-		    host_stat & ATA_DMA_ACTIVE)
-			host_stat |= ATA_DMA_INTR;
+	u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
+	u32 int_status = in_be32(mmio + SCC_DMA_INTST);
+	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+	static int retry = 0;
+
+	/* return if IOS_SS is cleared */
+	if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
+		return host_stat;
+
+	/* errata A252,A308 workaround: Step4 */
+	if (ata_altstatus(ap) & ATA_ERR && int_status & INTSTS_INTRQ)
+		return (host_stat | ATA_DMA_INTR);
+
+	/* errata A308 workaround Step5 */
+	if (int_status & INTSTS_IOIRQS) {
+		host_stat |= ATA_DMA_INTR;
+
+		/* We don't check ATAPI DMA because it is limited to UDMA4 */
+		if ((qc->tf.protocol == ATA_PROT_DMA &&
+		     qc->dev->xfer_mode > XFER_UDMA_4)) {
+			if (!(int_status & INTSTS_ACTEINT)) {
+				printk(KERN_WARNING "ata%u: data lost occurred. (ACTEINT==0, retry:%d)\n",
+				       ap->print_id, retry);
+				host_stat |= ATA_DMA_ERR;
+				if (retry++)
+					ap->udma_mask >>= 1;
+			} else
+				retry = 0;
+		}
 	}
 
 	return host_stat;
@@ -892,10 +912,6 @@ static void scc_std_postreset (struct ata_port *ap, unsigned int *classes)
 {
 	DPRINTK("ENTER\n");
 
-	/* re-enable interrupts */
-	if (!ap->ops->error_handler)
-		ap->ops->irq_on(ap);
-
 	/* is double-select really necessary? */
 	if (classes[0] != ATA_DEV_NONE)
 		ap->ops->dev_select(ap, 1);
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 1e8f421963c7..89691541fe59 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -410,11 +410,8 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev)
 
 static int serverworks_fixup_csb(struct pci_dev *pdev)
 {
-	u8 rev;
 	u8 btr;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
 	/* Third Channel Test */
 	if (!(PCI_FUNC(pdev->devfn) & 1)) {
 		struct pci_dev * findev = NULL;
@@ -456,7 +453,7 @@ static int serverworks_fixup_csb(struct pci_dev *pdev)
 	if (!(PCI_FUNC(pdev->devfn) & 1))
 		btr |= 0x2;
 	else
-		btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+		btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
 	pci_write_config_byte(pdev, 0x5A, btr);
 
 	return btr;
@@ -478,31 +475,31 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	static const struct ata_port_info info[4] = {
 		{ /* OSB4 */
 			.sht = &serverworks_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = 0x07,
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* OSB4 no UDMA */
 			.sht = &serverworks_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
 			.udma_mask = 0x00,
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* CSB5 */
 			.sht = &serverworks_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x1f,
+			.udma_mask = ATA_UDMA4,
 			.port_ops = &serverworks_csb_port_ops
 		}, { /* CSB5 - later revisions*/
 			.sht = &serverworks_sht,
-			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = 0x3f,
+			.udma_mask = ATA_UDMA5,
 			.port_ops = &serverworks_csb_port_ops
 		}
 	};
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 440e2cb6ee75..b0cd52d6e3fb 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -35,6 +35,8 @@
 #define DRV_NAME "pata_sil680"
 #define DRV_VERSION "0.4.6"
 
+#define SIL680_MMIO_BAR		5
+
 /**
  *	sil680_selreg		-	return register base
  *	@hwif: interface
@@ -293,8 +295,8 @@ static u8 sil680_init_chip(struct pci_dev *pdev)
 
 	pci_read_config_byte(pdev, 0x8A, &tmpbyte);
 
-	printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
-			tmpbyte & 1, tmpbyte & 0x30);
+	dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
+		tmpbyte & 1, tmpbyte & 0x30);
 
 	switch(tmpbyte & 0x30) {
 		case 0x00:
@@ -315,8 +317,8 @@ static u8 sil680_init_chip(struct pci_dev *pdev)
 	}
 
 	pci_read_config_byte(pdev,   0x8A, &tmpbyte);
-	printk(KERN_INFO "sil680: BA5_EN = %d clock = %02X\n",
-			tmpbyte & 1, tmpbyte & 0x30);
+	dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
+		tmpbyte & 1, tmpbyte & 0x30);
 
 	pci_write_config_byte(pdev,  0xA1, 0x72);
 	pci_write_config_word(pdev,  0xA2, 0x328A);
@@ -339,22 +341,23 @@ static u8 sil680_init_chip(struct pci_dev *pdev)
 	return tmpbyte & 0x30;
 }
 
-static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+static int __devinit sil680_init_one(struct pci_dev *pdev,
+				     const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &sil680_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x7f,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &sil680_port_ops
 	};
 	static const struct ata_port_info info_slow = {
 		.sht = &sil680_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &sil680_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index cfe4ec6eb3d5..9a829a7cbc60 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -149,6 +149,9 @@ static int sis_pre_reset(struct ata_port *ap, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
 		return -ENOENT;
 
+	/* Clear the FIFO settings. We can't enable the FIFO until
+	   we know we are poking at a disk */
+	pci_write_config_byte(pdev, 0x4B, 0);
 	return ata_std_prereset(ap, deadline);
 }
 
@@ -732,7 +735,7 @@ static const struct ata_port_operations sis_old_ops = {
 
 static const struct ata_port_info sis_info = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.mwdma_mask	= 0x07,
 	.udma_mask	= 0,
@@ -740,7 +743,7 @@ static const struct ata_port_info sis_info = {
 };
 static const struct ata_port_info sis_info33 = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.mwdma_mask	= 0x07,
 	.udma_mask	= ATA_UDMA2,	/* UDMA 33 */
@@ -748,28 +751,28 @@ static const struct ata_port_info sis_info33 = {
 };
 static const struct ata_port_info sis_info66 = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA4,	/* UDMA 66 */
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info100 = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA5,
 	.port_ops	= &sis_100_ops,
 };
 static const struct ata_port_info sis_info100_early = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.udma_mask	= ATA_UDMA5,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info133 = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_ops,
@@ -783,7 +786,7 @@ const struct ata_port_info sis_info133_for_sata = {
 };
 static const struct ata_port_info sis_info133_early = {
 	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= 0x1f,	/* pio0-4 */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_early_ops,
@@ -928,9 +931,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (host != NULL) {
 			chipset = sets;			/* Match found */
 			if (sets->device == 0x630) {	/* SIS630 */
-				u8 host_rev;
-				pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
-				if (host_rev >= 0x30)	/* 630 ET */
+				if (host->revision >= 0x30)	/* 630 ET */
 					chipset = &sis100_early;
 			}
 			break;
@@ -974,7 +975,6 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		u16 trueid;
 		u8 prefctl;
 		u8 idecfg;
-		u8 sbrev;
 
 		/* Try the second unmasking technique */
 		pci_read_config_byte(pdev, 0x4a, &idecfg);
@@ -987,11 +987,10 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 			lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */
 			if (lpc_bridge == NULL)
 				break;
-			pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
 			pci_read_config_byte(pdev, 0x49, &prefctl);
 			pci_dev_put(lpc_bridge);
 
-			if (sbrev == 0x10 && (prefctl & 0x80)) {
+			if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
 				chipset = &sis133_early;
 				break;
 			}
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index e5aaec43694d..8c2813aa6cdb 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -270,7 +270,6 @@ static struct ata_port_operations sl82c105_port_ops = {
 static int sl82c105_bridge_revision(struct pci_dev *pdev)
 {
 	struct pci_dev *bridge;
-	u8 rev;
 
 	/*
 	 * The bridge should be part of the same device, but function 0.
@@ -292,10 +291,8 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
 	/*
 	 * We need to find function 0's revision, not function 1
 	 */
-	pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
-
 	pci_dev_put(bridge);
-	return rev;
+	return bridge->revision;
 }
 
 
@@ -303,14 +300,14 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 {
 	static const struct ata_port_info info_dma = {
 		.sht = &sl82c105_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &sl82c105_port_ops
 	};
 	static const struct ata_port_info info_early = {
 		.sht = &sl82c105_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.port_ops = &sl82c105_port_ops
 	};
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index b1d3076dfe51..af21f443db6e 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -235,7 +235,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.sht = &triflex_sht,
-		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.port_ops = &triflex_port_ops
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 63eca299c62b..f645fe22cd1e 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -471,7 +471,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x7,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &via_port_ops
 	};
 	/* VIA UDMA 66 devices */
@@ -480,7 +480,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x1f,
+		.udma_mask = ATA_UDMA4,
 		.port_ops = &via_port_ops
 	};
 	/* VIA UDMA 100 devices */
@@ -489,7 +489,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x3f,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &via_port_ops
 	};
 	/* UDMA133 with bad AST (All current 133) */
@@ -498,7 +498,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
-		.udma_mask = 0x7f,	/* FIXME: should check north bridge */
+		.udma_mask = ATA_UDMA6,	/* FIXME: should check north bridge */
 		.port_ops = &via_port_ops
 	};
 	struct ata_port_info type;
@@ -506,7 +506,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct pci_dev *isa = NULL;
 	const struct via_isa_bridge *config;
 	static int printed_version;
-	u8 t;
 	u8 enable;
 	u32 timing;
 
@@ -520,9 +519,8 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			!!(config->flags & VIA_BAD_ID),
 			config->id, NULL))) {
 
-			pci_read_config_byte(isa, PCI_REVISION_ID, &t);
-			if (t >= config->rev_min &&
-			    t <= config->rev_max)
+			if (isa->revision >= config->rev_min &&
+			    isa->revision <= config->rev_max)
 				break;
 			pci_dev_put(isa);
 		}
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index f12c2b6ac08e..bec1de594de8 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -145,32 +145,32 @@ static struct scsi_host_template adma_ata_sht = {
 	.name			= DRV_NAME,
 	.ioctl			= ata_scsi_ioctl,
 	.queuecommand		= ata_scsi_queuecmd,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+	.proc_name		= DRV_NAME,
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
+	.dma_boundary		= ADMA_DMA_BOUNDARY,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
-	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ENABLE_CLUSTERING,
-	.proc_name		= DRV_NAME,
-	.dma_boundary		= ADMA_DMA_BOUNDARY,
-	.slave_configure	= ata_scsi_slave_config,
-	.slave_destroy		= ata_scsi_slave_destroy,
-	.bios_param		= ata_std_bios_param,
+	.emulated		= ATA_SHT_EMULATED,
 };
 
 static const struct ata_port_operations adma_ata_ops = {
 	.port_disable		= ata_port_disable,
 	.tf_load		= ata_tf_load,
 	.tf_read		= ata_tf_read,
-	.check_status		= ata_check_status,
-	.check_atapi_dma	= adma_check_atapi_dma,
 	.exec_command		= ata_exec_command,
+	.check_status		= ata_check_status,
 	.dev_select		= ata_std_dev_select,
 	.phy_reset		= adma_phy_reset,
+	.check_atapi_dma	= adma_check_atapi_dma,
+	.data_xfer		= ata_data_xfer,
 	.qc_prep		= adma_qc_prep,
 	.qc_issue		= adma_qc_issue,
 	.eng_timeout		= adma_eng_timeout,
-	.data_xfer		= ata_data_xfer,
 	.irq_clear		= adma_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
@@ -188,7 +188,7 @@ static struct ata_port_info adma_port_info[] = {
 				  ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_POLLING,
 		.pio_mask	= 0x10, /* pio4 */
-		.udma_mask	= 0x1f, /* udma0-4 */
+		.udma_mask	= ATA_UDMA4,
 		.port_ops	= &adma_ata_ops,
 	},
 };
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index dc3bbce04676..3de183461c3c 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -192,7 +192,7 @@ static void inic_reset_port(void __iomem *port_base)
 
 static u32 inic_scr_read(struct ata_port *ap, unsigned sc_reg)
 {
-	void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+	void __iomem *scr_addr = ap->ioaddr.scr_addr;
 	void __iomem *addr;
 	u32 val;
 
@@ -210,7 +210,7 @@ static u32 inic_scr_read(struct ata_port *ap, unsigned sc_reg)
 
 static void inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
 {
-	void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+	void __iomem *scr_addr = ap->ioaddr.scr_addr;
 	void __iomem *addr;
 
 	if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
@@ -594,7 +594,7 @@ static struct ata_port_info inic_port_info = {
 	.flags			= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
 	.pio_mask		= 0x1f,	/* pio0-4 */
 	.mwdma_mask		= 0x07, /* mwdma0-2 */
-	.udma_mask		= 0x7f,	/* udma0-6 */
+	.udma_mask		= ATA_UDMA6,
 	.port_ops		= &inic_port_ops
 };
 
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 590f2f92b4e0..5d576435fccc 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -29,11 +29,6 @@
   I distinctly remember a couple workarounds (one related to PCI-X)
   are still needed.
 
-  2) Convert to LibATA new EH.  Required for hotplug, NCQ, and sane
-  probing/error handling in general.  MUST HAVE.
-
-  3) Add hotplug support (easy, once new-EH support appears)
-
   4) Add NCQ support (easy to intermediate, once new-EH support appears)
 
   5) Investigate problems with PCI Message Signalled Interrupts (MSI).
@@ -108,8 +103,6 @@ enum {
 	MV_SATAHC_ARBTR_REG_SZ	= MV_MINOR_REG_AREA_SZ,		/* arbiter */
 	MV_PORT_REG_SZ		= MV_MINOR_REG_AREA_SZ,
 
-	MV_USE_Q_DEPTH		= ATA_DEF_QUEUE,
-
 	MV_MAX_Q_DEPTH		= 32,
 	MV_MAX_Q_DEPTH_MASK	= MV_MAX_Q_DEPTH - 1,
 
@@ -133,18 +126,22 @@ enum {
 	/* Host Flags */
 	MV_FLAG_DUAL_HC		= (1 << 30),  /* two SATA Host Controllers */
 	MV_FLAG_IRQ_COALESCE	= (1 << 29),  /* IRQ coalescing capability */
-	MV_COMMON_FLAGS		= (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				   ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
-				   ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING),
+	MV_COMMON_FLAGS		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
+				  ATA_FLAG_PIO_POLLING,
 	MV_6XXX_FLAGS		= MV_FLAG_IRQ_COALESCE,
 
 	CRQB_FLAG_READ		= (1 << 0),
 	CRQB_TAG_SHIFT		= 1,
+	CRQB_IOID_SHIFT		= 6,	/* CRQB Gen-II/IIE IO Id shift */
+	CRQB_HOSTQ_SHIFT	= 17,	/* CRQB Gen-II/IIE HostQueTag shift */
 	CRQB_CMD_ADDR_SHIFT	= 8,
 	CRQB_CMD_CS		= (0x2 << 11),
 	CRQB_CMD_LAST		= (1 << 15),
 
 	CRPB_FLAG_STATUS_SHIFT	= 8,
+	CRPB_IOID_SHIFT_6	= 5,	/* CRPB Gen-II IO Id shift */
+	CRPB_IOID_SHIFT_7	= 7,	/* CRPB Gen-IIE IO Id shift */
 
 	EPRD_FLAG_END_OF_TBL	= (1 << 31),
 
@@ -236,8 +233,10 @@ enum {
 	EDMA_ERR_DEV_DCON	= (1 << 3),
 	EDMA_ERR_DEV_CON	= (1 << 4),
 	EDMA_ERR_SERR		= (1 << 5),
-	EDMA_ERR_SELF_DIS	= (1 << 7),
+	EDMA_ERR_SELF_DIS	= (1 << 7),	/* Gen II/IIE self-disable */
+	EDMA_ERR_SELF_DIS_5	= (1 << 8),	/* Gen I self-disable */
 	EDMA_ERR_BIST_ASYNC	= (1 << 8),
+	EDMA_ERR_TRANS_IRQ_7	= (1 << 8),	/* Gen IIE transprt layer irq */
 	EDMA_ERR_CRBQ_PAR	= (1 << 9),
 	EDMA_ERR_CRPB_PAR	= (1 << 10),
 	EDMA_ERR_INTRL_PAR	= (1 << 11),
@@ -248,13 +247,33 @@ enum {
 	EDMA_ERR_LNK_CTRL_TX	= (0x1f << 21),
 	EDMA_ERR_LNK_DATA_TX	= (0x1f << 26),
 	EDMA_ERR_TRANS_PROTO	= (1 << 31),
-	EDMA_ERR_FATAL		= (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
-				   EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR |
-				   EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR |
-				   EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 |
-				   EDMA_ERR_LNK_DATA_RX |
-				   EDMA_ERR_LNK_DATA_TX |
-				   EDMA_ERR_TRANS_PROTO),
+	EDMA_ERR_OVERRUN_5	= (1 << 5),
+	EDMA_ERR_UNDERRUN_5	= (1 << 6),
+	EDMA_EH_FREEZE		= EDMA_ERR_D_PAR |
+				  EDMA_ERR_PRD_PAR |
+				  EDMA_ERR_DEV_DCON |
+				  EDMA_ERR_DEV_CON |
+				  EDMA_ERR_SERR |
+				  EDMA_ERR_SELF_DIS |
+				  EDMA_ERR_CRBQ_PAR |
+				  EDMA_ERR_CRPB_PAR |
+				  EDMA_ERR_INTRL_PAR |
+				  EDMA_ERR_IORDY |
+				  EDMA_ERR_LNK_CTRL_RX_2 |
+				  EDMA_ERR_LNK_DATA_RX |
+				  EDMA_ERR_LNK_DATA_TX |
+				  EDMA_ERR_TRANS_PROTO,
+	EDMA_EH_FREEZE_5	= EDMA_ERR_D_PAR |
+				  EDMA_ERR_PRD_PAR |
+				  EDMA_ERR_DEV_DCON |
+				  EDMA_ERR_DEV_CON |
+				  EDMA_ERR_OVERRUN_5 |
+				  EDMA_ERR_UNDERRUN_5 |
+				  EDMA_ERR_SELF_DIS_5 |
+				  EDMA_ERR_CRBQ_PAR |
+				  EDMA_ERR_CRPB_PAR |
+				  EDMA_ERR_INTRL_PAR |
+				  EDMA_ERR_IORDY,
 
 	EDMA_REQ_Q_BASE_HI_OFS	= 0x10,
 	EDMA_REQ_Q_IN_PTR_OFS	= 0x14,		/* also contains BASE_LO */
@@ -282,18 +301,18 @@ enum {
 	MV_HP_ERRATA_60X1B2	= (1 << 3),
 	MV_HP_ERRATA_60X1C0	= (1 << 4),
 	MV_HP_ERRATA_XX42A0	= (1 << 5),
-	MV_HP_50XX		= (1 << 6),
-	MV_HP_GEN_IIE		= (1 << 7),
+	MV_HP_GEN_I		= (1 << 6),
+	MV_HP_GEN_II		= (1 << 7),
+	MV_HP_GEN_IIE		= (1 << 8),
 
 	/* Port private flags (pp_flags) */
 	MV_PP_FLAG_EDMA_EN	= (1 << 0),
 	MV_PP_FLAG_EDMA_DS_ACT	= (1 << 1),
+	MV_PP_FLAG_HAD_A_RESET	= (1 << 2),
 };
 
-#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
-#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
-#define IS_GEN_I(hpriv) IS_50XX(hpriv)
-#define IS_GEN_II(hpriv) IS_60XX(hpriv)
+#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
+#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
 #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
 
 enum {
@@ -352,6 +371,10 @@ struct mv_port_priv {
 	dma_addr_t		crpb_dma;
 	struct mv_sg		*sg_tbl;
 	dma_addr_t		sg_tbl_dma;
+
+	unsigned int		req_idx;
+	unsigned int		resp_idx;
+
 	u32			pp_flags;
 };
 
@@ -384,14 +407,15 @@ static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
 static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
 static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
 static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static void mv_phy_reset(struct ata_port *ap);
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep);
 static int mv_port_start(struct ata_port *ap);
 static void mv_port_stop(struct ata_port *ap);
 static void mv_qc_prep(struct ata_queued_cmd *qc);
 static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static void mv_eng_timeout(struct ata_port *ap);
+static void mv_error_handler(struct ata_port *ap);
+static void mv_post_int_cmd(struct ata_queued_cmd *qc);
+static void mv_eh_freeze(struct ata_port *ap);
+static void mv_eh_thaw(struct ata_port *ap);
 static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 
 static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -415,14 +439,31 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio);
 static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
 static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no);
-static void mv_stop_and_reset(struct ata_port *ap);
 
-static struct scsi_host_template mv_sht = {
+static struct scsi_host_template mv5_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= MV_MAX_SG_CT,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= 1,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= MV_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct scsi_host_template mv6_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
 	.ioctl			= ata_scsi_ioctl,
 	.queuecommand		= ata_scsi_queuecmd,
-	.can_queue		= MV_USE_Q_DEPTH,
+	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= MV_MAX_SG_CT,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
@@ -444,19 +485,21 @@ static const struct ata_port_operations mv5_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
-	.phy_reset		= mv_phy_reset,
 	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
 
-	.eng_timeout		= mv_eng_timeout,
-
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
+	.error_handler		= mv_error_handler,
+	.post_internal_cmd	= mv_post_int_cmd,
+	.freeze			= mv_eh_freeze,
+	.thaw			= mv_eh_thaw,
+
 	.scr_read		= mv5_scr_read,
 	.scr_write		= mv5_scr_write,
 
@@ -473,19 +516,21 @@ static const struct ata_port_operations mv6_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
-	.phy_reset		= mv_phy_reset,
 	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
 
-	.eng_timeout		= mv_eng_timeout,
-
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
+	.error_handler		= mv_error_handler,
+	.post_internal_cmd	= mv_post_int_cmd,
+	.freeze			= mv_eh_freeze,
+	.thaw			= mv_eh_thaw,
+
 	.scr_read		= mv_scr_read,
 	.scr_write		= mv_scr_write,
 
@@ -502,19 +547,21 @@ static const struct ata_port_operations mv_iie_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
-	.phy_reset		= mv_phy_reset,
 	.cable_detect		= ata_cable_sata,
 
 	.qc_prep		= mv_qc_prep_iie,
 	.qc_issue		= mv_qc_issue,
 	.data_xfer		= ata_data_xfer,
 
-	.eng_timeout		= mv_eng_timeout,
-
 	.irq_clear		= mv_irq_clear,
 	.irq_on			= ata_irq_on,
 	.irq_ack		= ata_irq_ack,
 
+	.error_handler		= mv_error_handler,
+	.post_internal_cmd	= mv_post_int_cmd,
+	.freeze			= mv_eh_freeze,
+	.thaw			= mv_eh_thaw,
+
 	.scr_read		= mv_scr_read,
 	.scr_write		= mv_scr_write,
 
@@ -526,44 +573,44 @@ static const struct ata_port_info mv_port_info[] = {
 	{  /* chip_504x */
 		.flags		= MV_COMMON_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_508x */
-		.flags		= (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+		.flags		= MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_5080 */
-		.flags		= (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+		.flags		= MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_604x */
-		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_608x */
-		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
-				   MV_FLAG_DUAL_HC),
+		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+				  MV_FLAG_DUAL_HC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_6042 */
-		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_7042 */
-		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
-		.udma_mask	= 0x7f,	/* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
 	},
 };
@@ -709,6 +756,46 @@ static void mv_irq_clear(struct ata_port *ap)
 {
 }
 
+static void mv_set_edma_ptrs(void __iomem *port_mmio,
+			     struct mv_host_priv *hpriv,
+			     struct mv_port_priv *pp)
+{
+	u32 index;
+
+	/*
+	 * initialize request queue
+	 */
+	index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
+
+	WARN_ON(pp->crqb_dma & 0x3ff);
+	writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
+	writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
+		 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+		writelfl((pp->crqb_dma & 0xffffffff) | index,
+			 port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+	else
+		writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+
+	/*
+	 * initialize response queue
+	 */
+	index = (pp->resp_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_RSP_Q_PTR_SHIFT;
+
+	WARN_ON(pp->crpb_dma & 0xff);
+	writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+
+	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+		writelfl((pp->crpb_dma & 0xffffffff) | index,
+			 port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+	else
+		writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
+	writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
+		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+}
+
 /**
  *      mv_start_dma - Enable eDMA engine
  *      @base: port base address
@@ -720,9 +807,15 @@ static void mv_irq_clear(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
+static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv,
+			 struct mv_port_priv *pp)
 {
-	if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
+	if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+		/* clear EDMA event indicators, if any */
+		writelfl(0, base + EDMA_ERR_IRQ_CAUSE_OFS);
+
+		mv_set_edma_ptrs(base, hpriv, pp);
+
 		writelfl(EDMA_EN, base + EDMA_CMD_OFS);
 		pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
 	}
@@ -739,14 +832,14 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_stop_dma(struct ata_port *ap)
+static int mv_stop_dma(struct ata_port *ap)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp	= ap->private_data;
 	u32 reg;
-	int i;
+	int i, err = 0;
 
-	if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) {
+	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 		/* Disable EDMA if active.   The disable bit auto clears.
 		 */
 		writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
@@ -758,16 +851,18 @@ static void mv_stop_dma(struct ata_port *ap)
 	/* now properly wait for the eDMA to stop */
 	for (i = 1000; i > 0; i--) {
 		reg = readl(port_mmio + EDMA_CMD_OFS);
-		if (!(EDMA_EN & reg)) {
+		if (!(reg & EDMA_EN))
 			break;
-		}
+
 		udelay(100);
 	}
 
-	if (EDMA_EN & reg) {
+	if (reg & EDMA_EN) {
 		ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
-		/* FIXME: Consider doing a reset here to recover */
+		err = -EIO;
 	}
+
+	return err;
 }
 
 #ifdef ATA_DEBUG
@@ -884,12 +979,13 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
 		writelfl(val, mv_ap_base(ap) + ofs);
 }
 
-static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
+static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
+			void __iomem *port_mmio)
 {
 	u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
 
 	/* set up non-NCQ EDMA configuration */
-	cfg &= ~(1 << 9);	/* disable equeue */
+	cfg &= ~(1 << 9);	/* disable eQue */
 
 	if (IS_GEN_I(hpriv)) {
 		cfg &= ~0x1f;		/* clear queue depth */
@@ -909,7 +1005,7 @@ static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
 		cfg |= (1 << 18);	/* enab early completion */
 		cfg |= (1 << 17);	/* enab cut-through (dis stor&forwrd) */
 		cfg &= ~(1 << 16);	/* dis FIS-based switching (for now) */
-		cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
+		cfg &= ~(EDMA_CFG_NCQ);	/* clear NCQ */
 	}
 
 	writelfl(cfg, port_mmio + EDMA_CFG_OFS);
@@ -971,28 +1067,9 @@ static int mv_port_start(struct ata_port *ap)
 	pp->sg_tbl = mem;
 	pp->sg_tbl_dma = mem_dma;
 
-	mv_edma_cfg(hpriv, port_mmio);
+	mv_edma_cfg(ap, hpriv, port_mmio);
 
-	writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
-	writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
-		 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
-	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
-		writelfl(pp->crqb_dma & 0xffffffff,
-			 port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
-	else
-		writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
-
-	writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
-	if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
-		writelfl(pp->crpb_dma & 0xffffffff,
-			 port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-	else
-		writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
-	writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
-		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	mv_set_edma_ptrs(port_mmio, hpriv, pp);
 
 	/* Don't turn on EDMA here...do it before DMA commands only.  Else
 	 * we'll be unable to send non-data, PIO, etc due to restricted access
@@ -1055,11 +1132,6 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
 	return n_sg;
 }
 
-static inline unsigned mv_inc_q_index(unsigned index)
-{
-	return (index + 1) & MV_MAX_Q_DEPTH_MASK;
-}
-
 static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
 {
 	u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
@@ -1088,7 +1160,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	u16 flags = 0;
 	unsigned in_index;
 
- 	if (ATA_PROT_DMA != qc->tf.protocol)
+ 	if (qc->tf.protocol != ATA_PROT_DMA)
 		return;
 
 	/* Fill in command request block
@@ -1097,10 +1169,10 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 		flags |= CRQB_FLAG_READ;
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
+	flags |= qc->tag << CRQB_IOID_SHIFT;	/* 50xx appears to ignore this*/
 
-	/* get current queue index from hardware */
-	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
-			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+	/* get current queue index from software */
+	in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
 
 	pp->crqb[in_index].sg_addr =
 		cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
@@ -1180,7 +1252,7 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	unsigned in_index;
 	u32 flags = 0;
 
- 	if (ATA_PROT_DMA != qc->tf.protocol)
+ 	if (qc->tf.protocol != ATA_PROT_DMA)
 		return;
 
 	/* Fill in Gen IIE command request block
@@ -1190,10 +1262,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
+	flags |= qc->tag << CRQB_IOID_SHIFT;	/* "I/O Id" is -really-
+						   what we use as our tag */
 
-	/* get current queue index from hardware */
-	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
-			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+	/* get current queue index from software */
+	in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
 
 	crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
 	crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
@@ -1241,83 +1314,41 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
  */
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 {
-	void __iomem *port_mmio = mv_ap_base(qc->ap);
-	struct mv_port_priv *pp = qc->ap->private_data;
-	unsigned in_index;
-	u32 in_ptr;
+	struct ata_port *ap = qc->ap;
+	void __iomem *port_mmio = mv_ap_base(ap);
+	struct mv_port_priv *pp = ap->private_data;
+	struct mv_host_priv *hpriv = ap->host->private_data;
+	u32 in_index;
 
-	if (ATA_PROT_DMA != qc->tf.protocol) {
+	if (qc->tf.protocol != ATA_PROT_DMA) {
 		/* We're about to send a non-EDMA capable command to the
 		 * port.  Turn off EDMA so there won't be problems accessing
 		 * shadow block, etc registers.
 		 */
-		mv_stop_dma(qc->ap);
+		mv_stop_dma(ap);
 		return ata_qc_issue_prot(qc);
 	}
 
-	in_ptr   = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-	in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+	mv_start_dma(port_mmio, hpriv, pp);
+
+	in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
 
 	/* until we do queuing, the queue should be empty at this point */
 	WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
 		>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
-	in_index = mv_inc_q_index(in_index);	/* now incr producer index */
+	pp->req_idx++;
 
-	mv_start_dma(port_mmio, pp);
+	in_index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
 
 	/* and write the request in pointer to kick the EDMA to life */
-	in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
-	in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
-	writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
+		 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
 	return 0;
 }
 
 /**
- *      mv_get_crpb_status - get status from most recently completed cmd
- *      @ap: ATA channel to manipulate
- *
- *      This routine is for use when the port is in DMA mode, when it
- *      will be using the CRPB (command response block) method of
- *      returning command completion information.  We check indices
- *      are good, grab status, and bump the response consumer index to
- *      prove that we're up to date.
- *
- *      LOCKING:
- *      Inherited from caller.
- */
-static u8 mv_get_crpb_status(struct ata_port *ap)
-{
-	void __iomem *port_mmio = mv_ap_base(ap);
-	struct mv_port_priv *pp = ap->private_data;
-	unsigned out_index;
-	u32 out_ptr;
-	u8 ata_status;
-
-	out_ptr   = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
-	out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
-
-	ata_status = le16_to_cpu(pp->crpb[out_index].flags)
-					>> CRPB_FLAG_STATUS_SHIFT;
-
-	/* increment our consumer index... */
-	out_index = mv_inc_q_index(out_index);
-
-	/* and, until we do NCQ, there should only be 1 CRPB waiting */
-	WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
-		>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
-
-	/* write out our inc'd consumer index so EDMA knows we're caught up */
-	out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
-	out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
-	writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
-
-	/* Return ATA status register for completed CRPB */
-	return ata_status;
-}
-
-/**
  *      mv_err_intr - Handle error interrupts on the port
  *      @ap: ATA channel to manipulate
  *      @reset_allowed: bool: 0 == don't trigger from reset here
@@ -1331,30 +1362,191 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_err_intr(struct ata_port *ap, int reset_allowed)
+static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
-	u32 edma_err_cause, serr = 0;
+	u32 edma_err_cause, eh_freeze_mask, serr = 0;
+	struct mv_port_priv *pp = ap->private_data;
+	struct mv_host_priv *hpriv = ap->host->private_data;
+	unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
+	unsigned int action = 0, err_mask = 0;
+	struct ata_eh_info *ehi = &ap->eh_info;
 
-	edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+	ata_ehi_clear_desc(ehi);
 
-	if (EDMA_ERR_SERR & edma_err_cause) {
+	if (!edma_enabled) {
+		/* just a guess: do we need to do this? should we
+		 * expand this, and do it in all cases?
+		 */
 		sata_scr_read(ap, SCR_ERROR, &serr);
 		sata_scr_write_flush(ap, SCR_ERROR, serr);
 	}
-	if (EDMA_ERR_SELF_DIS & edma_err_cause) {
-		struct mv_port_priv *pp	= ap->private_data;
-		pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+
+	edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+	ata_ehi_push_desc(ehi, "edma_err 0x%08x", edma_err_cause);
+
+	/*
+	 * all generations share these EDMA error cause bits
+	 */
+
+	if (edma_err_cause & EDMA_ERR_DEV)
+		err_mask |= AC_ERR_DEV;
+	if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
+			EDMA_ERR_CRBQ_PAR | EDMA_ERR_CRPB_PAR |
+			EDMA_ERR_INTRL_PAR)) {
+		err_mask |= AC_ERR_ATA_BUS;
+		action |= ATA_EH_HARDRESET;
+		ata_ehi_push_desc(ehi, ", parity error");
+	}
+	if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
+		ata_ehi_hotplugged(ehi);
+		ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
+			", dev disconnect" : ", dev connect");
+	}
+
+	if (IS_GEN_I(hpriv)) {
+		eh_freeze_mask = EDMA_EH_FREEZE_5;
+
+		if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
+			struct mv_port_priv *pp	= ap->private_data;
+			pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+			ata_ehi_push_desc(ehi, ", EDMA self-disable");
+		}
+	} else {
+		eh_freeze_mask = EDMA_EH_FREEZE;
+
+		if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+			struct mv_port_priv *pp	= ap->private_data;
+			pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+			ata_ehi_push_desc(ehi, ", EDMA self-disable");
+		}
+
+		if (edma_err_cause & EDMA_ERR_SERR) {
+			sata_scr_read(ap, SCR_ERROR, &serr);
+			sata_scr_write_flush(ap, SCR_ERROR, serr);
+			err_mask = AC_ERR_ATA_BUS;
+			action |= ATA_EH_HARDRESET;
+		}
 	}
-	DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
-		"SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr);
 
 	/* Clear EDMA now that SERR cleanup done */
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-	/* check for fatal here and recover if needed */
-	if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
-		mv_stop_and_reset(ap);
+	if (!err_mask) {
+		err_mask = AC_ERR_OTHER;
+		action |= ATA_EH_HARDRESET;
+	}
+
+	ehi->serror |= serr;
+	ehi->action |= action;
+
+	if (qc)
+		qc->err_mask |= err_mask;
+	else
+		ehi->err_mask |= err_mask;
+
+	if (edma_err_cause & eh_freeze_mask)
+		ata_port_freeze(ap);
+	else
+		ata_port_abort(ap);
+}
+
+static void mv_intr_pio(struct ata_port *ap)
+{
+	struct ata_queued_cmd *qc;
+	u8 ata_status;
+
+	/* ignore spurious intr if drive still BUSY */
+	ata_status = readb(ap->ioaddr.status_addr);
+	if (unlikely(ata_status & ATA_BUSY))
+		return;
+
+	/* get active ATA command */
+	qc = ata_qc_from_tag(ap, ap->active_tag);
+	if (unlikely(!qc))			/* no active tag */
+		return;
+	if (qc->tf.flags & ATA_TFLAG_POLLING)	/* polling; we don't own qc */
+		return;
+
+	/* and finally, complete the ATA command */
+	qc->err_mask |= ac_err_mask(ata_status);
+	ata_qc_complete(qc);
+}
+
+static void mv_intr_edma(struct ata_port *ap)
+{
+	void __iomem *port_mmio = mv_ap_base(ap);
+	struct mv_host_priv *hpriv = ap->host->private_data;
+	struct mv_port_priv *pp = ap->private_data;
+	struct ata_queued_cmd *qc;
+	u32 out_index, in_index;
+	bool work_done = false;
+
+	/* get h/w response queue pointer */
+	in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+			>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	while (1) {
+		u16 status;
+
+		/* get s/w response queue last-read pointer, and compare */
+		out_index = pp->resp_idx & MV_MAX_Q_DEPTH_MASK;
+		if (in_index == out_index)
+			break;
+
+		 
+		/* 50xx: get active ATA command */
+		if (IS_GEN_I(hpriv)) 
+			qc = ata_qc_from_tag(ap, ap->active_tag);
+
+		/* 60xx: get active ATA command via tag, to enable support
+		 * for queueing.  this works transparently for queued and
+		 * non-queued modes.
+		 */
+		else {
+			unsigned int tag;
+
+			if (IS_GEN_II(hpriv))
+				tag = (le16_to_cpu(pp->crpb[out_index].id)
+					>> CRPB_IOID_SHIFT_6) & 0x3f;
+			else
+				tag = (le16_to_cpu(pp->crpb[out_index].id)
+					>> CRPB_IOID_SHIFT_7) & 0x3f;
+
+			qc = ata_qc_from_tag(ap, tag);
+		}
+
+		/* lower 8 bits of status are EDMA_ERR_IRQ_CAUSE_OFS
+		 * bits (WARNING: might not necessarily be associated
+		 * with this command), which -should- be clear
+		 * if all is well
+		 */
+		status = le16_to_cpu(pp->crpb[out_index].flags);
+		if (unlikely(status & 0xff)) {
+			mv_err_intr(ap, qc);
+			return;
+		}
+
+		/* and finally, complete the ATA command */
+		if (qc) {
+			qc->err_mask |=
+				ac_err_mask(status >> CRPB_FLAG_STATUS_SHIFT);
+			ata_qc_complete(qc);
+		}
+
+		/* advance software response queue pointer, to 
+		 * indicate (after the loop completes) to hardware
+		 * that we have consumed a response queue entry.
+		 */
+		work_done = true;
+		pp->resp_idx++;
+	}
+
+	if (work_done)
+		writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
+			 (out_index << EDMA_RSP_Q_PTR_SHIFT),
+			 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 }
 
 /**
@@ -1377,10 +1569,8 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
 {
 	void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
 	void __iomem *hc_mmio = mv_hc_base(mmio, hc);
-	struct ata_queued_cmd *qc;
 	u32 hc_irq_cause;
-	int shift, port, port0, hard_port, handled;
-	unsigned int err_mask;
+	int port, port0;
 
 	if (hc == 0)
 		port0 = 0;
@@ -1389,79 +1579,95 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc)
 
 	/* we'll need the HC success int register in most cases */
 	hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
-	if (hc_irq_cause)
-		writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+	if (!hc_irq_cause)
+		return;
+
+	writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
 
 	VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
 		hc,relevant,hc_irq_cause);
 
 	for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
-		u8 ata_status = 0;
 		struct ata_port *ap = host->ports[port];
 		struct mv_port_priv *pp = ap->private_data;
+		int have_err_bits, hard_port, shift;
+
+		if ((!ap) || (ap->flags & ATA_FLAG_DISABLED))
+			continue;
+
+		shift = port << 1;		/* (port * 2) */
+		if (port >= MV_PORTS_PER_HC) {
+			shift++;	/* skip bit 8 in the HC Main IRQ reg */
+		}
+		have_err_bits = ((PORT0_ERR << shift) & relevant);
+
+		if (unlikely(have_err_bits)) {
+			struct ata_queued_cmd *qc;
+
+			qc = ata_qc_from_tag(ap, ap->active_tag);
+			if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+				continue;
+
+			mv_err_intr(ap, qc);
+			continue;
+		}
 
 		hard_port = mv_hardport_from_port(port); /* range 0..3 */
-		handled = 0;	/* ensure ata_status is set if handled++ */
 
-		/* Note that DEV_IRQ might happen spuriously during EDMA,
-		 * and should be ignored in such cases.
-		 * The cause of this is still under investigation.
-		 */
 		if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
-			/* EDMA: check for response queue interrupt */
-			if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
-				ata_status = mv_get_crpb_status(ap);
-				handled = 1;
-			}
+			if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause)
+				mv_intr_edma(ap);
 		} else {
-			/* PIO: check for device (drive) interrupt */
-			if ((DEV_IRQ << hard_port) & hc_irq_cause) {
-				ata_status = readb(ap->ioaddr.status_addr);
-				handled = 1;
-				/* ignore spurious intr if drive still BUSY */
-				if (ata_status & ATA_BUSY) {
-					ata_status = 0;
-					handled = 0;
-				}
-			}
+			if ((DEV_IRQ << hard_port) & hc_irq_cause)
+				mv_intr_pio(ap);
 		}
+	}
+	VPRINTK("EXIT\n");
+}
 
-		if (ap && (ap->flags & ATA_FLAG_DISABLED))
-			continue;
+static void mv_pci_error(struct ata_host *host, void __iomem *mmio)
+{
+	struct ata_port *ap;
+	struct ata_queued_cmd *qc;
+	struct ata_eh_info *ehi;
+	unsigned int i, err_mask, printed = 0;
+	u32 err_cause;
 
-		err_mask = ac_err_mask(ata_status);
+	err_cause = readl(mmio + PCI_IRQ_CAUSE_OFS);
 
-		shift = port << 1;		/* (port * 2) */
-		if (port >= MV_PORTS_PER_HC) {
-			shift++;	/* skip bit 8 in the HC Main IRQ reg */
-		}
-		if ((PORT0_ERR << shift) & relevant) {
-			mv_err_intr(ap, 1);
-			err_mask |= AC_ERR_OTHER;
-			handled = 1;
-		}
+	dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
+		   err_cause);
 
-		if (handled) {
+	DPRINTK("All regs @ PCI error\n");
+	mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
+
+	writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+
+	for (i = 0; i < host->n_ports; i++) {
+		ap = host->ports[i];
+		if (!ata_port_offline(ap)) {
+			ehi = &ap->eh_info;
+			ata_ehi_clear_desc(ehi);
+			if (!printed++)
+				ata_ehi_push_desc(ehi,
+					"PCI err cause 0x%08x", err_cause);
+			err_mask = AC_ERR_HOST_BUS;
+			ehi->action = ATA_EH_HARDRESET;
 			qc = ata_qc_from_tag(ap, ap->active_tag);
-			if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) {
-				VPRINTK("port %u IRQ found for qc, "
-					"ata_status 0x%x\n", port,ata_status);
-				/* mark qc status appropriately */
-				if (!(qc->tf.flags & ATA_TFLAG_POLLING)) {
-					qc->err_mask |= err_mask;
-					ata_qc_complete(qc);
-				}
-			}
+			if (qc)
+				qc->err_mask |= err_mask;
+			else
+				ehi->err_mask |= err_mask;
+
+			ata_port_freeze(ap);
 		}
 	}
-	VPRINTK("EXIT\n");
 }
 
 /**
- *      mv_interrupt -
+ *      mv_interrupt - Main interrupt event handler
  *      @irq: unused
  *      @dev_instance: private data; in this case the host structure
- *      @regs: unused
  *
  *      Read the read only register to determine if any host
  *      controllers have pending interrupts.  If so, call lower level
@@ -1477,7 +1683,6 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 	struct ata_host *host = dev_instance;
 	unsigned int hc, handled = 0, n_hcs;
 	void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
-	struct mv_host_priv *hpriv;
 	u32 irq_stat;
 
 	irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
@@ -1491,34 +1696,21 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 	n_hcs = mv_get_hc_count(host->ports[0]->flags);
 	spin_lock(&host->lock);
 
+	if (unlikely(irq_stat & PCI_ERR)) {
+		mv_pci_error(host, mmio);
+		handled = 1;
+		goto out_unlock;	/* skip all other HC irq handling */
+	}
+
 	for (hc = 0; hc < n_hcs; hc++) {
 		u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
 		if (relevant) {
 			mv_host_intr(host, relevant, hc);
-			handled++;
-		}
-	}
-
-	hpriv = host->private_data;
-	if (IS_60XX(hpriv)) {
-		/* deal with the interrupt coalescing bits */
-		if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
-			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
-			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
-			writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+			handled = 1;
 		}
 	}
 
-	if (PCI_ERR & irq_stat) {
-		printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
-		       readl(mmio + PCI_IRQ_CAUSE_OFS));
-
-		DPRINTK("All regs @ PCI error\n");
-		mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
-
-		writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
-		handled++;
-	}
+out_unlock:
 	spin_unlock(&host->lock);
 
 	return IRQ_RETVAL(handled);
@@ -1573,12 +1765,9 @@ static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val)
 
 static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
 {
-	u8 rev_id;
 	int early_5080;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
-	early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
+	early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
 
 	if (!early_5080) {
 		u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
@@ -1907,7 +2096,7 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
 
 	writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
 
-	if (IS_60XX(hpriv)) {
+	if (IS_GEN_II(hpriv)) {
 		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
 		ifctl |= (1 << 7);		/* enable gen2i speed */
 		ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
@@ -1923,32 +2112,12 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
 
 	hpriv->ops->phy_errata(hpriv, mmio, port_no);
 
-	if (IS_50XX(hpriv))
+	if (IS_GEN_I(hpriv))
 		mdelay(1);
 }
 
-static void mv_stop_and_reset(struct ata_port *ap)
-{
-	struct mv_host_priv *hpriv = ap->host->private_data;
-	void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
-
-	mv_stop_dma(ap);
-
-	mv_channel_reset(hpriv, mmio, ap->port_no);
-
-	__mv_phy_reset(ap, 0);
-}
-
-static inline void __msleep(unsigned int msec, int can_sleep)
-{
-	if (can_sleep)
-		msleep(msec);
-	else
-		mdelay(msec);
-}
-
 /**
- *      __mv_phy_reset - Perform eDMA reset followed by COMRESET
+ *      mv_phy_reset - Perform eDMA reset followed by COMRESET
  *      @ap: ATA channel to manipulate
  *
  *      Part of this is taken from __sata_phy_reset and modified to
@@ -1958,14 +2127,12 @@ static inline void __msleep(unsigned int msec, int can_sleep)
  *      Inherited from caller.  This is coded to safe to call at
  *      interrupt level, i.e. it does not sleep.
  */
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
+static void mv_phy_reset(struct ata_port *ap, unsigned int *class,
+			 unsigned long deadline)
 {
 	struct mv_port_priv *pp	= ap->private_data;
 	struct mv_host_priv *hpriv = ap->host->private_data;
 	void __iomem *port_mmio = mv_ap_base(ap);
-	struct ata_taskfile tf;
-	struct ata_device *dev = &ap->device[0];
-	unsigned long timeout;
 	int retry = 5;
 	u32 sstatus;
 
@@ -1978,22 +2145,21 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
 	/* Issue COMRESET via SControl */
 comreset_retry:
 	sata_scr_write_flush(ap, SCR_CONTROL, 0x301);
-	__msleep(1, can_sleep);
+	msleep(1);
 
 	sata_scr_write_flush(ap, SCR_CONTROL, 0x300);
-	__msleep(20, can_sleep);
+	msleep(20);
 
-	timeout = jiffies + msecs_to_jiffies(200);
 	do {
 		sata_scr_read(ap, SCR_STATUS, &sstatus);
 		if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
 			break;
 
-		__msleep(1, can_sleep);
-	} while (time_before(jiffies, timeout));
+		msleep(1);
+	} while (time_before(jiffies, deadline));
 
 	/* work around errata */
-	if (IS_60XX(hpriv) &&
+	if (IS_GEN_II(hpriv) &&
 	    (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
 	    (retry-- > 0))
 		goto comreset_retry;
@@ -2002,13 +2168,8 @@ comreset_retry:
 		"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
 		mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
 
-	if (ata_port_online(ap)) {
-		ata_port_probe(ap);
-	} else {
-		sata_scr_read(ap, SCR_STATUS, &sstatus);
-		ata_port_printk(ap, KERN_INFO,
-				"no device found (phy stat %08x)\n", sstatus);
-		ata_port_disable(ap);
+	if (ata_port_offline(ap)) {
+		*class = ATA_DEV_NONE;
 		return;
 	}
 
@@ -2022,68 +2183,152 @@ comreset_retry:
 		u8 drv_stat = ata_check_status(ap);
 		if ((drv_stat != 0x80) && (drv_stat != 0x7f))
 			break;
-		__msleep(500, can_sleep);
+		msleep(500);
 		if (retry-- <= 0)
 			break;
+		if (time_after(jiffies, deadline))
+			break;
 	}
 
-	tf.lbah = readb(ap->ioaddr.lbah_addr);
-	tf.lbam = readb(ap->ioaddr.lbam_addr);
-	tf.lbal = readb(ap->ioaddr.lbal_addr);
-	tf.nsect = readb(ap->ioaddr.nsect_addr);
+	/* FIXME: if we passed the deadline, the following
+	 * code probably produces an invalid result
+	 */
 
-	dev->class = ata_dev_classify(&tf);
-	if (!ata_dev_enabled(dev)) {
-		VPRINTK("Port disabled post-sig: No device present.\n");
-		ata_port_disable(ap);
-	}
+	/* finally, read device signature from TF registers */
+	*class = ata_dev_try_classify(ap, 0, NULL);
 
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-	pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+	WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN);
 
 	VPRINTK("EXIT\n");
 }
 
-static void mv_phy_reset(struct ata_port *ap)
+static int mv_prereset(struct ata_port *ap, unsigned long deadline)
 {
-	__mv_phy_reset(ap, 1);
+	struct mv_port_priv *pp	= ap->private_data;
+	struct ata_eh_context *ehc = &ap->eh_context;
+	int rc;
+	
+	rc = mv_stop_dma(ap);
+	if (rc)
+		ehc->i.action |= ATA_EH_HARDRESET;
+
+	if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) {
+		pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
+		ehc->i.action |= ATA_EH_HARDRESET;
+	}
+
+	/* if we're about to do hardreset, nothing more to do */
+	if (ehc->i.action & ATA_EH_HARDRESET)
+		return 0;
+
+	if (ata_port_online(ap))
+		rc = ata_wait_ready(ap, deadline);
+	else
+		rc = -ENODEV;
+
+	return rc;
 }
 
-/**
- *      mv_eng_timeout - Routine called by libata when SCSI times out I/O
- *      @ap: ATA channel to manipulate
- *
- *      Intent is to clear all pending error conditions, reset the
- *      chip/bus, fail the command, and move on.
- *
- *      LOCKING:
- *      This routine holds the host lock while failing the command.
- */
-static void mv_eng_timeout(struct ata_port *ap)
+static int mv_hardreset(struct ata_port *ap, unsigned int *class,
+			unsigned long deadline)
 {
+	struct mv_host_priv *hpriv = ap->host->private_data;
 	void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
-	struct ata_queued_cmd *qc;
-	unsigned long flags;
 
-	ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n");
-	DPRINTK("All regs @ start of eng_timeout\n");
-	mv_dump_all_regs(mmio, ap->port_no, to_pci_dev(ap->host->dev));
+	mv_stop_dma(ap);
 
-	qc = ata_qc_from_tag(ap, ap->active_tag);
-        printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
-	       mmio, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd);
+	mv_channel_reset(hpriv, mmio, ap->port_no);
 
-	spin_lock_irqsave(&ap->host->lock, flags);
-	mv_err_intr(ap, 0);
-	mv_stop_and_reset(ap);
-	spin_unlock_irqrestore(&ap->host->lock, flags);
+	mv_phy_reset(ap, class, deadline);
+
+	return 0;
+}
+
+static void mv_postreset(struct ata_port *ap, unsigned int *classes)
+{
+	u32 serr;
+
+	/* print link status */
+	sata_print_link_status(ap);
+
+	/* clear SError */
+	sata_scr_read(ap, SCR_ERROR, &serr);
+	sata_scr_write_flush(ap, SCR_ERROR, serr);
 
-	WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
-	if (qc->flags & ATA_QCFLAG_ACTIVE) {
-		qc->err_mask |= AC_ERR_TIMEOUT;
-		ata_eh_qc_complete(qc);
+	/* bail out if no device is present */
+	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+		DPRINTK("EXIT, no device\n");
+		return;
 	}
+
+	/* set up device control */
+	iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+}
+
+static void mv_error_handler(struct ata_port *ap)
+{
+	ata_do_eh(ap, mv_prereset, ata_std_softreset,
+		  mv_hardreset, mv_postreset);
+}
+
+static void mv_post_int_cmd(struct ata_queued_cmd *qc)
+{
+	mv_stop_dma(qc->ap);
+}
+
+static void mv_eh_freeze(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+	unsigned int hc = (ap->port_no > 3) ? 1 : 0;
+	u32 tmp, mask;
+	unsigned int shift;
+
+	/* FIXME: handle coalescing completion events properly */
+
+	shift = ap->port_no * 2;
+	if (hc > 0)
+		shift++;
+
+	mask = 0x3 << shift;
+
+	/* disable assertion of portN err, done events */
+	tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
+	writelfl(tmp & ~mask, mmio + HC_MAIN_IRQ_MASK_OFS);
+}
+
+static void mv_eh_thaw(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+	unsigned int hc = (ap->port_no > 3) ? 1 : 0;
+	void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+	void __iomem *port_mmio = mv_ap_base(ap);
+	u32 tmp, mask, hc_irq_cause;
+	unsigned int shift, hc_port_no = ap->port_no;
+
+	/* FIXME: handle coalescing completion events properly */
+
+	shift = ap->port_no * 2;
+	if (hc > 0) {
+		shift++;
+		hc_port_no -= 4;
+	}
+
+	mask = 0x3 << shift;
+
+	/* clear EDMA errors on this port */
+	writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+	/* clear pending irq events */
+	hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+	hc_irq_cause &= ~(1 << hc_port_no);	/* clear CRPB-done */
+	hc_irq_cause &= ~(1 << (hc_port_no + 8)); /* clear Device int */
+	writel(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+
+	/* enable assertion of portN err, done events */
+	tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
+	writelfl(tmp | mask, mmio + HC_MAIN_IRQ_MASK_OFS);
 }
 
 /**
@@ -2139,17 +2384,14 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
 	struct mv_host_priv *hpriv = host->private_data;
-	u8 rev_id;
 	u32 hp_flags = hpriv->hp_flags;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
 	switch(board_idx) {
 	case chip_5080:
 		hpriv->ops = &mv5xxx_ops;
-		hp_flags |= MV_HP_50XX;
+		hp_flags |= MV_HP_GEN_I;
 
-		switch (rev_id) {
+		switch (pdev->revision) {
 		case 0x1:
 			hp_flags |= MV_HP_ERRATA_50XXB0;
 			break;
@@ -2167,9 +2409,9 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 	case chip_504x:
 	case chip_508x:
 		hpriv->ops = &mv5xxx_ops;
-		hp_flags |= MV_HP_50XX;
+		hp_flags |= MV_HP_GEN_I;
 
-		switch (rev_id) {
+		switch (pdev->revision) {
 		case 0x0:
 			hp_flags |= MV_HP_ERRATA_50XXB0;
 			break;
@@ -2187,8 +2429,9 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 	case chip_604x:
 	case chip_608x:
 		hpriv->ops = &mv6xxx_ops;
+		hp_flags |= MV_HP_GEN_II;
 
-		switch (rev_id) {
+		switch (pdev->revision) {
 		case 0x7:
 			hp_flags |= MV_HP_ERRATA_60X1B2;
 			break;
@@ -2206,10 +2449,9 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 	case chip_7042:
 	case chip_6042:
 		hpriv->ops = &mv6xxx_ops;
-
 		hp_flags |= MV_HP_GEN_IIE;
 
-		switch (rev_id) {
+		switch (pdev->revision) {
 		case 0x0:
 			hp_flags |= MV_HP_ERRATA_XX42A0;
 			break;
@@ -2273,7 +2515,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 	hpriv->ops->enable_leds(hpriv, mmio);
 
 	for (port = 0; port < host->n_ports; port++) {
-		if (IS_60XX(hpriv)) {
+		if (IS_GEN_II(hpriv)) {
 			void __iomem *port_mmio = mv_port_base(mmio, port);
 
 			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
@@ -2308,7 +2550,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 	/* and unmask interrupt generation for host regs */
 	writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
 
-	if (IS_50XX(hpriv))
+	if (IS_GEN_I(hpriv))
 		writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
 	else
 		writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
@@ -2337,25 +2579,32 @@ static void mv_print_info(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
 	struct mv_host_priv *hpriv = host->private_data;
-	u8 rev_id, scc;
-	const char *scc_s;
+	u8 scc;
+	const char *scc_s, *gen;
 
 	/* Use this to determine the HW stepping of the chip so we know
 	 * what errata to workaround
 	 */
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
 	pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
 	if (scc == 0)
 		scc_s = "SCSI";
 	else if (scc == 0x01)
 		scc_s = "RAID";
 	else
-		scc_s = "unknown";
+		scc_s = "?";
+
+	if (IS_GEN_I(hpriv))
+		gen = "I";
+	else if (IS_GEN_II(hpriv))
+		gen = "II";
+	else if (IS_GEN_IIE(hpriv))
+		gen = "IIE";
+	else
+		gen = "?";
 
 	dev_printk(KERN_INFO, &pdev->dev,
-	       "%u slots %u ports %s mode IRQ via %s\n",
-	       (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
+	       "Gen-%s %u slots %u ports %s mode IRQ via %s\n",
+	       gen, (unsigned)MV_MAX_Q_DEPTH, host->n_ports,
 	       scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
 }
 
@@ -2417,8 +2666,9 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	mv_print_info(host);
 
 	pci_set_master(pdev);
+	pci_set_mwi(pdev);
 	return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
-				 &mv_sht);
+				 IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
 }
 
 static int __init mv_init(void)
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index b2656867c647..db81e3efa5ec 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1560,7 +1560,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	ppi[0] = &nv_port_info[type];
-	rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 6dc0b011a6b7..d2fcb9a6bec2 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -45,8 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.07"
-
+#define DRV_VERSION	"2.09"
 
 enum {
 	PDC_MAX_PORTS		= 4,
@@ -94,7 +93,7 @@ enum {
 	board_20319		= 2,	/* FastTrak S150 TX4 */
 	board_20619		= 3,	/* FastTrak TX4000 */
 	board_2057x		= 4,	/* SATAII150 Tx2plus */
-	board_2057x_pata	= 5,	/* SATAII150 Tx2plus */
+	board_2057x_pata	= 5,	/* SATAII150 Tx2plus PATA port */
 	board_40518		= 6,	/* SATAII150 Tx4 */
 
 	PDC_HAS_PATA		= (1 << 1), /* PDC20375/20575 has PATA */
@@ -124,7 +123,6 @@ enum {
 	PDC_FLAG_4_PORTS	= (1 << 26), /* 4 ports */
 };
 
-
 struct pdc_port_priv {
 	u8			*pkt;
 	dma_addr_t		pkt_dma;
@@ -252,7 +250,7 @@ static const struct ata_port_info pdc_port_info[] = {
 				  PDC_FLAG_SATA_PATA,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_old_sata_ops,
 	},
 
@@ -261,7 +259,7 @@ static const struct ata_port_info pdc_port_info[] = {
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_pata_ops,
 	},
 
@@ -271,7 +269,7 @@ static const struct ata_port_info pdc_port_info[] = {
 				  PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_old_sata_ops,
 	},
 
@@ -281,7 +279,7 @@ static const struct ata_port_info pdc_port_info[] = {
 				  PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_pata_ops,
 	},
 
@@ -291,7 +289,7 @@ static const struct ata_port_info pdc_port_info[] = {
 				  PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_sata_ops,
 	},
 
@@ -301,7 +299,7 @@ static const struct ata_port_info pdc_port_info[] = {
 				  PDC_FLAG_GEN_II,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_pata_ops,
 	},
 
@@ -311,7 +309,7 @@ static const struct ata_port_info pdc_port_info[] = {
 				  PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_sata_ops,
 	},
 };
@@ -340,7 +338,6 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = {
 	{ }	/* terminate list */
 };
 
-
 static struct pci_driver pdc_ata_pci_driver = {
 	.name			= DRV_NAME,
 	.id_table		= pdc_ata_pci_tbl,
@@ -348,7 +345,6 @@ static struct pci_driver pdc_ata_pci_driver = {
 	.remove			= ata_pci_remove_one,
 };
 
-
 static int pdc_common_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host->dev;
@@ -382,7 +378,7 @@ static int pdc_sata_port_start(struct ata_port *ap)
 
 	/* fix up PHYMODE4 align timing */
 	if (ap->flags & PDC_FLAG_GEN_II) {
-		void __iomem *mmio = (void __iomem *) ap->ioaddr.scr_addr;
+		void __iomem *mmio = ap->ioaddr.scr_addr;
 		unsigned int tmp;
 
 		tmp = readl(mmio + 0x014);
@@ -418,7 +414,7 @@ static void pdc_reset_port(struct ata_port *ap)
 static int pdc_pata_cable_detect(struct ata_port *ap)
 {
 	u8 tmp;
-	void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
+	void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
 
 	tmp = readb(mmio);
 	if (tmp & 0x01)
@@ -438,7 +434,6 @@ static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 	return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
 }
 
-
 static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 			       u32 val)
 {
@@ -573,7 +568,7 @@ static void pdc_qc_prep(struct ata_queued_cmd *qc)
 
 static void pdc_freeze(struct ata_port *ap)
 {
-	void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
 	u32 tmp;
 
 	tmp = readl(mmio + PDC_CTLSTAT);
@@ -585,7 +580,7 @@ static void pdc_freeze(struct ata_port *ap)
 
 static void pdc_thaw(struct ata_port *ap)
 {
-	void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+	void __iomem *mmio = ap->ioaddr.cmd_addr;
 	u32 tmp;
 
 	/* clear IRQ */
@@ -657,8 +652,8 @@ static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
 	ata_port_abort(ap);
 }
 
-static inline unsigned int pdc_host_intr( struct ata_port *ap,
-                                          struct ata_queued_cmd *qc)
+static inline unsigned int pdc_host_intr(struct ata_port *ap,
+					 struct ata_queued_cmd *qc)
 {
 	unsigned int handled = 0;
 	void __iomem *port_mmio = ap->ioaddr.cmd_addr;
@@ -685,10 +680,10 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap,
 		handled = 1;
 		break;
 
-        default:
+	default:
 		ap->stats.idle_irq++;
 		break;
-        }
+	}
 
 	return handled;
 }
@@ -701,6 +696,18 @@ static void pdc_irq_clear(struct ata_port *ap)
 	readl(mmio + PDC_INT_SEQMASK);
 }
 
+static inline int pdc_is_sataii_tx4(unsigned long flags)
+{
+	const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
+	return (flags & mask) == mask;
+}
+
+static inline unsigned int pdc_port_no_to_ata_no(unsigned int port_no, int is_sataii_tx4)
+{
+	static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
+	return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
+}
+
 static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
 {
 	struct ata_host *host = dev_instance;
@@ -709,6 +716,9 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
 	unsigned int i, tmp;
 	unsigned int handled = 0;
 	void __iomem *mmio_base;
+	unsigned int hotplug_offset, ata_no;
+	u32 hotplug_status;
+	int is_sataii_tx4;
 
 	VPRINTK("ENTER\n");
 
@@ -719,10 +729,20 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
 
 	mmio_base = host->iomap[PDC_MMIO_BAR];
 
+	/* read and clear hotplug flags for all ports */
+	if (host->ports[0]->flags & PDC_FLAG_GEN_II)
+		hotplug_offset = PDC2_SATA_PLUG_CSR;
+	else
+		hotplug_offset = PDC_SATA_PLUG_CSR;
+	hotplug_status = readl(mmio_base + hotplug_offset);
+	if (hotplug_status & 0xff)
+		writel(hotplug_status | 0xff, mmio_base + hotplug_offset);
+	hotplug_status &= 0xff;	/* clear uninteresting bits */
+
 	/* reading should also clear interrupts */
 	mask = readl(mmio_base + PDC_INT_SEQMASK);
 
-	if (mask == 0xffffffff) {
+	if (mask == 0xffffffff && hotplug_status == 0) {
 		VPRINTK("QUICK EXIT 2\n");
 		return IRQ_NONE;
 	}
@@ -730,16 +750,34 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
 	spin_lock(&host->lock);
 
 	mask &= 0xffff;		/* only 16 tags possible */
-	if (!mask) {
+	if (mask == 0 && hotplug_status == 0) {
 		VPRINTK("QUICK EXIT 3\n");
 		goto done_irq;
 	}
 
 	writel(mask, mmio_base + PDC_INT_SEQMASK);
 
+	is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags);
+
 	for (i = 0; i < host->n_ports; i++) {
 		VPRINTK("port %u\n", i);
 		ap = host->ports[i];
+
+		/* check for a plug or unplug event */
+		ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
+		tmp = hotplug_status & (0x11 << ata_no);
+		if (tmp && ap &&
+		    !(ap->flags & ATA_FLAG_DISABLED)) {
+			struct ata_eh_info *ehi = &ap->eh_info;
+			ata_ehi_clear_desc(ehi);
+			ata_ehi_hotplugged(ehi);
+			ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp);
+			ata_port_freeze(ap);
+			++handled;
+			continue;
+		}
+
+		/* check for a packet interrupt */
 		tmp = mask & (1 << (i + 1));
 		if (tmp && ap &&
 		    !(ap->flags & ATA_FLAG_DISABLED)) {
@@ -807,7 +845,6 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 	ata_tf_load(ap, tf);
 }
 
-
 static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
 {
 	WARN_ON (tf->protocol == ATA_PROT_DMA ||
@@ -867,7 +904,6 @@ static void pdc_ata_setup_port(struct ata_port *ap,
 	ap->ioaddr.scr_addr		= scr_addr;
 }
 
-
 static void pdc_host_init(struct ata_host *host)
 {
 	void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
@@ -897,9 +933,9 @@ static void pdc_host_init(struct ata_host *host)
 	tmp = readl(mmio + hotplug_offset);
 	writel(tmp | 0xff, mmio + hotplug_offset);
 
-	/* mask plug/unplug ints */
+	/* unmask plug/unplug ints */
 	tmp = readl(mmio + hotplug_offset);
-	writel(tmp | 0xff0000, mmio + hotplug_offset);
+	writel(tmp & ~0xff0000, mmio + hotplug_offset);
 
 	/* don't initialise TBG or SLEW on 2nd generation chips */
 	if (is_gen2)
@@ -955,10 +991,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 
 	if (pi->flags & PDC_FLAG_SATA_PATA) {
 		u8 tmp = readb(base + PDC_FLASH_CTL+1);
-		if (!(tmp & 0x80)) {
+		if (!(tmp & 0x80))
 			ppi[n_ports++] = pi + 1;
-			dev_printk(KERN_INFO, &pdev->dev, "PATA port found\n");
-		}
 	}
 
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
@@ -968,22 +1002,12 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	}
 	host->iomap = pcim_iomap_table(pdev);
 
-	is_sataii_tx4 = 0;
-	if ((pi->flags & (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) == (PDC_FLAG_GEN_II|PDC_FLAG_4_PORTS)) {
-		is_sataii_tx4 = 1;
-		dev_printk(KERN_INFO, &pdev->dev, "applying SATAII TX4 port numbering workaround\n");
-	}
+	is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags);
 	for (i = 0; i < host->n_ports; i++) {
-		static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
-		int ata_nr;
-
-		ata_nr = i;
-		if (is_sataii_tx4)
-			ata_nr = sataii_tx4_port_remap[i];
-
+		unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
 		pdc_ata_setup_port(host->ports[i],
-				   base + 0x200 + ata_nr * 0x80,
-				   base + 0x400 + ata_nr * 0x100);
+				   base + 0x200 + ata_no * 0x80,
+				   base + 0x400 + ata_no * 0x100);
 	}
 
 	/* initialize adapter */
@@ -1002,19 +1026,16 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 				 &pdc_ata_sht);
 }
 
-
 static int __init pdc_ata_init(void)
 {
 	return pci_register_driver(&pdc_ata_pci_driver);
 }
 
-
 static void __exit pdc_ata_exit(void)
 {
 	pci_unregister_driver(&pdc_ata_pci_driver);
 }
 
-
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 6688ccb66320..9ab554da89bf 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -176,7 +176,7 @@ static const struct ata_port_info qs_port_info[] = {
 				  //FIXME ATA_FLAG_SRST |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
 		.pio_mask	= 0x10, /* pio4 */
-		.udma_mask	= 0x7f, /* udma0-6 */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &qs_ata_ops,
 	},
 };
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index a3b339bcf3cf..2a86dc4598d0 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -218,7 +218,7 @@ static const struct ata_port_info sil_port_info[] = {
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= 0x3f,			/* udma0-5 */
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
 	/* sil_3112_no_sata_irq */
@@ -227,7 +227,7 @@ static const struct ata_port_info sil_port_info[] = {
 				  SIL_FLAG_NO_SATA_IRQ,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= 0x3f,			/* udma0-5 */
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
 	/* sil_3512 */
@@ -235,7 +235,7 @@ static const struct ata_port_info sil_port_info[] = {
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= 0x3f,			/* udma0-5 */
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
 	/* sil_3114 */
@@ -243,7 +243,7 @@ static const struct ata_port_info sil_port_info[] = {
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= 0x3f,			/* udma0-5 */
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
 };
@@ -262,8 +262,9 @@ static const struct {
 	unsigned long sfis_cfg;	/* SATA FIS reception config register */
 } sil_port[] = {
 	/* port 0 ... */
-	{ 0x80, 0x8A, 0x00, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c },
-	{ 0xC0, 0xCA, 0x08, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc },
+	/*   tf    ctl  bmdma  bmdma2  fifo    scr   sien   mode   sfis */
+	{  0x80,  0x8A,   0x0,  0x10,  0x40, 0x100, 0x148,  0xb4, 0x14c },
+	{  0xC0,  0xCA,   0x8,  0x18,  0x44, 0x180, 0x1c8,  0xf4, 0x1cc },
 	{ 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c },
 	{ 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc },
 	/* ... port 3 */
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 0ddfae9911cd..ac43a30ebe29 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -426,7 +426,7 @@ static const struct ata_port_info sil24_port_info[] = {
 				  SIL24_FLAG_PCIX_IRQ_WOC,
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= 0x3f,			/* udma0-5 */
+		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
 		.port_ops	= &sil24_ops,
 	},
 	/* sil_3132 */
@@ -434,7 +434,7 @@ static const struct ata_port_info sil24_port_info[] = {
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= 0x3f,			/* udma0-5 */
+		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
 		.port_ops	= &sil24_ops,
 	},
 	/* sil_3131/sil_3531 */
@@ -442,7 +442,7 @@ static const struct ata_port_info sil24_port_info[] = {
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= 0x3f,			/* udma0-5 */
+		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
 		.port_ops	= &sil24_ops,
 	},
 };
@@ -888,7 +888,7 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
 		if (status & (1 << i)) {
 			struct ata_port *ap = host->ports[i];
 			if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
-				sil24_host_intr(host->ports[i]);
+				sil24_host_intr(ap);
 				handled++;
 			} else
 				printk(KERN_ERR DRV_NAME
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index f111c984a359..33716b00c6b7 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -133,7 +133,7 @@ static const struct ata_port_info sis_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x7,
-	.udma_mask	= 0x7f,
+	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_ops,
 };
 
@@ -334,7 +334,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index bcb2cd8b063d..63fe99afd59f 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -107,7 +107,7 @@ static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
 	if (sc_reg > SCR_CONTROL)
 		return 0xffffffffU;
-	return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+	return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
 }
 
 
@@ -116,7 +116,7 @@ static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 {
 	if (sc_reg > SCR_CONTROL)
 		return;
-	writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
+	writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
 }
 
 
@@ -197,7 +197,8 @@ static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 	unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
 	u8 dmactl;
-	void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
 	/* load PRD table addr. */
 	mb();	/* make sure PRD table writes are visible to controller */
 	writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
@@ -225,7 +226,7 @@ static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
 static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
-	void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
 	u8 dmactl;
 
 	/* start host DMA transaction */
@@ -253,7 +254,7 @@ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
 
 static u8 k2_stat_check_status(struct ata_port *ap)
 {
-       	return readl((void __iomem *) ap->ioaddr.status_addr);
+       	return readl(ap->ioaddr.status_addr);
 }
 
 #ifdef CONFIG_PPC_OF
@@ -360,7 +361,7 @@ static const struct ata_port_info k2_port_info[] = {
 				  ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA,
 		.pio_mask	= 0x1f,
 		.mwdma_mask	= 0x07,
-		.udma_mask	= 0x7f,
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &k2_sata_ops,
 	},
 	/* board_svw8 */
@@ -370,7 +371,7 @@ static const struct ata_port_info k2_port_info[] = {
 				  K2_FLAG_SATA_8_PORTS,
 		.pio_mask	= 0x1f,
 		.mwdma_mask	= 0x07,
-		.udma_mask	= 0x7f,
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &k2_sata_ops,
 	},
 };
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 2d14f3d56d92..5193bd8647ba 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -30,6 +30,54 @@
  *
  */
 
+/*
+	Theory of operation
+	-------------------
+
+	The SX4 (PDC20621) chip features a single Host DMA (HDMA) copy
+	engine, DIMM memory, and four ATA engines (one per SATA port).
+	Data is copied to/from DIMM memory by the HDMA engine, before
+	handing off to one (or more) of the ATA engines.  The ATA
+	engines operate solely on DIMM memory.
+
+	The SX4 behaves like a PATA chip, with no SATA controls or
+	knowledge whatsoever, leading to the presumption that
+	PATA<->SATA bridges exist on SX4 boards, external to the
+	PDC20621 chip itself.
+
+	The chip is quite capable, supporting an XOR engine and linked
+	hardware commands (permits a string to transactions to be
+	submitted and waited-on as a single unit), and an optional
+	microprocessor.
+
+	The limiting factor is largely software.  This Linux driver was
+	written to multiplex the single HDMA engine to copy disk
+	transactions into a fixed DIMM memory space, from where an ATA
+	engine takes over.  As a result, each WRITE looks like this:
+
+		submit HDMA packet to hardware
+		hardware copies data from system memory to DIMM
+		hardware raises interrupt
+
+		submit ATA packet to hardware
+		hardware executes ATA WRITE command, w/ data in DIMM
+		hardware raises interrupt
+	
+	and each READ looks like this:
+
+		submit ATA packet to hardware
+		hardware executes ATA READ command, w/ data in DIMM
+		hardware raises interrupt
+	
+		submit HDMA packet to hardware
+		hardware copies data from DIMM to system memory
+		hardware raises interrupt
+
+	This is a very slow, lock-step way of doing things that can
+	certainly be improved by motivated kernel hackers.
+
+ */
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -58,6 +106,8 @@ enum {
 	PDC_INT_SEQMASK		= 0x40,	/* Mask of asserted SEQ INTs */
 	PDC_HDMA_CTLSTAT	= 0x12C, /* Host DMA control / status */
 
+	PDC_CTLSTAT		= 0x60,	/* IDEn control / status */
+
 	PDC_20621_SEQCTL	= 0x400,
 	PDC_20621_SEQMASK	= 0x480,
 	PDC_20621_GENERAL_CTL	= 0x484,
@@ -87,48 +137,60 @@ enum {
 
 	board_20621		= 0,	/* FastTrak S150 SX4 */
 
-	PDC_RESET		= (1 << 11), /* HDMA reset */
+	PDC_MASK_INT		= (1 << 10), /* HDMA/ATA mask int */
+	PDC_RESET		= (1 << 11), /* HDMA/ATA reset */
+	PDC_DMA_ENABLE		= (1 << 7),  /* DMA start/stop */
 
 	PDC_MAX_HDMA		= 32,
 	PDC_HDMA_Q_MASK		= (PDC_MAX_HDMA - 1),
 
-	PDC_DIMM0_SPD_DEV_ADDRESS     = 0x50,
-	PDC_DIMM1_SPD_DEV_ADDRESS     = 0x51,
-	PDC_MAX_DIMM_MODULE           = 0x02,
-	PDC_I2C_CONTROL_OFFSET        = 0x48,
-	PDC_I2C_ADDR_DATA_OFFSET      = 0x4C,
-	PDC_DIMM0_CONTROL_OFFSET      = 0x80,
-	PDC_DIMM1_CONTROL_OFFSET      = 0x84,
-	PDC_SDRAM_CONTROL_OFFSET      = 0x88,
-	PDC_I2C_WRITE                 = 0x00000000,
-	PDC_I2C_READ                  = 0x00000040,
-	PDC_I2C_START                 = 0x00000080,
-	PDC_I2C_MASK_INT              = 0x00000020,
-	PDC_I2C_COMPLETE              = 0x00010000,
-	PDC_I2C_NO_ACK                = 0x00100000,
-	PDC_DIMM_SPD_SUBADDRESS_START = 0x00,
-	PDC_DIMM_SPD_SUBADDRESS_END   = 0x7F,
-	PDC_DIMM_SPD_ROW_NUM          = 3,
-	PDC_DIMM_SPD_COLUMN_NUM       = 4,
-	PDC_DIMM_SPD_MODULE_ROW       = 5,
-	PDC_DIMM_SPD_TYPE             = 11,
-	PDC_DIMM_SPD_FRESH_RATE       = 12,
-	PDC_DIMM_SPD_BANK_NUM         = 17,
-	PDC_DIMM_SPD_CAS_LATENCY      = 18,
-	PDC_DIMM_SPD_ATTRIBUTE        = 21,
-	PDC_DIMM_SPD_ROW_PRE_CHARGE   = 27,
-	PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28,
-	PDC_DIMM_SPD_RAS_CAS_DELAY    = 29,
-	PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30,
-	PDC_DIMM_SPD_SYSTEM_FREQ      = 126,
-	PDC_CTL_STATUS		      = 0x08,
-	PDC_DIMM_WINDOW_CTLR	      = 0x0C,
-	PDC_TIME_CONTROL              = 0x3C,
-	PDC_TIME_PERIOD               = 0x40,
-	PDC_TIME_COUNTER              = 0x44,
-	PDC_GENERAL_CTLR	      = 0x484,
-	PCI_PLL_INIT                  = 0x8A531824,
-	PCI_X_TCOUNT                  = 0xEE1E5CFF
+	PDC_DIMM0_SPD_DEV_ADDRESS	= 0x50,
+	PDC_DIMM1_SPD_DEV_ADDRESS	= 0x51,
+	PDC_I2C_CONTROL			= 0x48,
+	PDC_I2C_ADDR_DATA		= 0x4C,
+	PDC_DIMM0_CONTROL		= 0x80,
+	PDC_DIMM1_CONTROL		= 0x84,
+	PDC_SDRAM_CONTROL		= 0x88,
+	PDC_I2C_WRITE			= 0,		/* master -> slave */
+	PDC_I2C_READ			= (1 << 6),	/* master <- slave */
+	PDC_I2C_START			= (1 << 7),	/* start I2C proto */
+	PDC_I2C_MASK_INT		= (1 << 5),	/* mask I2C interrupt */
+	PDC_I2C_COMPLETE		= (1 << 16),	/* I2C normal compl. */
+	PDC_I2C_NO_ACK			= (1 << 20),	/* slave no-ack addr */
+	PDC_DIMM_SPD_SUBADDRESS_START	= 0x00,
+	PDC_DIMM_SPD_SUBADDRESS_END	= 0x7F,
+	PDC_DIMM_SPD_ROW_NUM		= 3,
+	PDC_DIMM_SPD_COLUMN_NUM		= 4,
+	PDC_DIMM_SPD_MODULE_ROW		= 5,
+	PDC_DIMM_SPD_TYPE		= 11,
+	PDC_DIMM_SPD_FRESH_RATE		= 12,
+	PDC_DIMM_SPD_BANK_NUM		= 17,
+	PDC_DIMM_SPD_CAS_LATENCY	= 18,
+	PDC_DIMM_SPD_ATTRIBUTE		= 21,
+	PDC_DIMM_SPD_ROW_PRE_CHARGE	= 27,
+	PDC_DIMM_SPD_ROW_ACTIVE_DELAY	= 28,
+	PDC_DIMM_SPD_RAS_CAS_DELAY	= 29,
+	PDC_DIMM_SPD_ACTIVE_PRECHARGE	= 30,
+	PDC_DIMM_SPD_SYSTEM_FREQ	= 126,
+	PDC_CTL_STATUS			= 0x08,
+	PDC_DIMM_WINDOW_CTLR		= 0x0C,
+	PDC_TIME_CONTROL		= 0x3C,
+	PDC_TIME_PERIOD			= 0x40,
+	PDC_TIME_COUNTER		= 0x44,
+	PDC_GENERAL_CTLR		= 0x484,
+	PCI_PLL_INIT			= 0x8A531824,
+	PCI_X_TCOUNT			= 0xEE1E5CFF,
+
+	/* PDC_TIME_CONTROL bits */
+	PDC_TIMER_BUZZER		= (1 << 10),
+	PDC_TIMER_MODE_PERIODIC		= 0,		/* bits 9:8 == 00 */
+	PDC_TIMER_MODE_ONCE		= (1 << 8),	/* bits 9:8 == 01 */
+	PDC_TIMER_ENABLE		= (1 << 7),
+	PDC_TIMER_MASK_INT		= (1 << 5),
+	PDC_TIMER_SEQ_MASK		= 0x1f,		/* SEQ ID for timer */
+	PDC_TIMER_DEFAULT		= PDC_TIMER_MODE_ONCE |
+					  PDC_TIMER_ENABLE |
+					  PDC_TIMER_MASK_INT,
 };
 
 
@@ -217,7 +279,7 @@ static const struct ata_port_info pdc_port_info[] = {
 				  ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
 		.pio_mask	= 0x1f, /* pio0-4 */
 		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= 0x7f, /* udma0-6 ; FIXME */
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_20621_ops,
 	},
 
@@ -999,17 +1061,17 @@ static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device,
 	i2creg |= subaddr << 16;
 
 	/* Set the device and subaddress */
-	writel(i2creg, mmio + PDC_I2C_ADDR_DATA_OFFSET);
-	readl(mmio + PDC_I2C_ADDR_DATA_OFFSET);
+	writel(i2creg, mmio + PDC_I2C_ADDR_DATA);
+	readl(mmio + PDC_I2C_ADDR_DATA);
 
 	/* Write Control to perform read operation, mask int */
 	writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT,
-	       mmio + PDC_I2C_CONTROL_OFFSET);
+	       mmio + PDC_I2C_CONTROL);
 
 	for (count = 0; count <= 1000; count ++) {
-		status = readl(mmio + PDC_I2C_CONTROL_OFFSET);
+		status = readl(mmio + PDC_I2C_CONTROL);
 		if (status & PDC_I2C_COMPLETE) {
-			status = readl(mmio + PDC_I2C_ADDR_DATA_OFFSET);
+			status = readl(mmio + PDC_I2C_ADDR_DATA);
 			break;
 		} else if (count == 1000)
 			return 0;
@@ -1099,8 +1161,8 @@ static int pdc20621_prog_dimm0(struct ata_host *host)
    	data |= (((size / 16) - 1) << 16);
    	data |= (0 << 23);
 	data |= 8;
-   	writel(data, mmio + PDC_DIMM0_CONTROL_OFFSET);
-	readl(mmio + PDC_DIMM0_CONTROL_OFFSET);
+   	writel(data, mmio + PDC_DIMM0_CONTROL);
+	readl(mmio + PDC_DIMM0_CONTROL);
    	return size;
 }
 
@@ -1122,27 +1184,27 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
 	*/
 
 	data = 0x022259F1;
-	writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
-	readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
+	writel(data, mmio + PDC_SDRAM_CONTROL);
+	readl(mmio + PDC_SDRAM_CONTROL);
 
 	/* Turn on for ECC */
 	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
 			  PDC_DIMM_SPD_TYPE, &spd0);
 	if (spd0 == 0x02) {
 		data |= (0x01 << 16);
-		writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
-		readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
+		writel(data, mmio + PDC_SDRAM_CONTROL);
+		readl(mmio + PDC_SDRAM_CONTROL);
 		printk(KERN_ERR "Local DIMM ECC Enabled\n");
    	}
 
    	/* DIMM Initialization Select/Enable (bit 18/19) */
    	data &= (~(1<<18));
    	data |= (1<<19);
-   	writel(data, mmio + PDC_SDRAM_CONTROL_OFFSET);
+   	writel(data, mmio + PDC_SDRAM_CONTROL);
 
    	error = 1;
    	for (i = 1; i <= 10; i++) {   /* polling ~5 secs */
-		data = readl(mmio + PDC_SDRAM_CONTROL_OFFSET);
+		data = readl(mmio + PDC_SDRAM_CONTROL);
 		if (!(data & (1<<19))) {
 	   		error = 0;
 	   		break;
@@ -1176,7 +1238,7 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
 	VPRINTK("Time Period Register (0x40): 0x%x\n", time_period);
 
 	/* Enable timer */
-	writel(0x00001a0, mmio + PDC_TIME_CONTROL);
+	writel(PDC_TIMER_DEFAULT, mmio + PDC_TIME_CONTROL);
 	readl(mmio + PDC_TIME_CONTROL);
 
 	/* Wait 3 seconds */
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 6815de7cca79..b52f83ab056a 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -129,7 +129,7 @@ static const struct ata_port_info uli_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 			  ATA_FLAG_IGN_SIMPLEX,
 	.pio_mask       = 0x1f,		/* pio0-4 */
-	.udma_mask      = 0x7f,		/* udma0-6 */
+	.udma_mask      = ATA_UDMA6,
 	.port_ops       = &uli_ops,
 };
 
@@ -213,7 +213,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->private_data = hpriv;
 
 	/* the first two ports are standard SFF */
-	rc = ata_pci_init_native_host(host);
+	rc = ata_pci_init_sff_host(host);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index e8b90e7b42dd..c4124475f754 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -223,7 +223,7 @@ static const struct ata_port_info vt6420_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x07,
-	.udma_mask	= 0x7f,
+	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &vt6420_sata_ops,
 };
 
@@ -231,7 +231,7 @@ static struct ata_port_info vt6421_sport_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0x07,
-	.udma_mask	= 0x7f,
+	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &vt6421_sata_ops,
 };
 
@@ -239,7 +239,7 @@ static struct ata_port_info vt6421_pport_info = {
 	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
 	.mwdma_mask	= 0,
-	.udma_mask	= 0x7f,
+	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &vt6421_pata_ops,
 };
 
@@ -303,9 +303,7 @@ static int vt6420_prereset(struct ata_port *ap, unsigned long deadline)
 	if (!(ap->pflags & ATA_PFLAG_LOADING))
 		goto skip_scr;
 
-	/* Resume phy.  This is the old resume sequence from
-	 * __sata_phy_reset().
-	 */
+	/* Resume phy.  This is the old SATA resume sequence */
 	svia_scr_write(ap, SCR_CONTROL, 0x300);
 	svia_scr_read(ap, SCR_CONTROL); /* flush */
 
@@ -414,7 +412,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int rc;
 
-	rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	*r_host = host;
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 81330175fc89..1b5d81faa102 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -371,7 +371,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
 				  ATA_FLAG_MMIO,
 		.pio_mask	= 0x1f,
 		.mwdma_mask	= 0x07,
-		.udma_mask	= 0x7f,
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &vsc_sata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &pi, NULL };
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 0d3a38b1cb0b..77637e780d41 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1704,7 +1704,6 @@ static int __devinit eni_do_init(struct atm_dev *dev)
 	struct pci_dev *pci_dev;
 	unsigned long real_base;
 	void __iomem *base;
-	unsigned char revision;
 	int error,i,last;
 
 	DPRINTK(">eni_init\n");
@@ -1715,12 +1714,6 @@ static int __devinit eni_do_init(struct atm_dev *dev)
 	pci_dev = eni_dev->pci_dev;
 	real_base = pci_resource_start(pci_dev, 0);
 	eni_dev->irq = pci_dev->irq;
-	error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision);
-	if (error) {
-		printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
-		    dev->number,error);
-		return -EINVAL;
-	}
 	if ((error = pci_write_config_word(pci_dev,PCI_COMMAND,
 	    PCI_COMMAND_MEMORY |
 	    (eni_dev->asic ? PCI_COMMAND_PARITY | PCI_COMMAND_SERR : 0)))) {
@@ -1729,7 +1722,7 @@ static int __devinit eni_do_init(struct atm_dev *dev)
 		return -EIO;
 	}
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,",
-	    dev->number,revision,real_base,eni_dev->irq);
+	    dev->number,pci_dev->revision,real_base,eni_dev->irq);
 	if (!(base = ioremap_nocache(real_base,MAP_MAX_SIZE))) {
 		printk("\n");
 		printk(KERN_ERR DEV_LABEL "(itf %d): can't set up page "
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 3800bc0cb2ef..8f995ce8d73b 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3679,7 +3679,6 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 	unsigned long membase, srambase;
 	struct idt77252_dev *card;
 	struct atm_dev *dev;
-	ushort revision = 0;
 	int i, err;
 
 
@@ -3688,19 +3687,13 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 		return err;
 	}
 
-	if (pci_read_config_word(pcidev, PCI_REVISION_ID, &revision)) {
-		printk("idt77252-%d: can't read PCI_REVISION_ID\n", index);
-		err = -ENODEV;
-		goto err_out_disable_pdev;
-	}
-
 	card = kzalloc(sizeof(struct idt77252_dev), GFP_KERNEL);
 	if (!card) {
 		printk("idt77252-%d: can't allocate private data\n", index);
 		err = -ENOMEM;
 		goto err_out_disable_pdev;
 	}
-	card->revision = revision;
+	card->revision = pcidev->revision;
 	card->index = index;
 	card->pcidev = pcidev;
 	sprintf(card->name, "idt77252-%d", card->index);
@@ -3762,8 +3755,8 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 	}
 
 	printk("%s: ABR SAR (Rev %c): MEM %08lx SRAM %08lx [%u KB]\n",
-	       card->name, ((revision > 1) && (revision < 25)) ?
-	       'A' + revision - 1 : '?', membase, srambase,
+	       card->name, ((card->revision > 1) && (card->revision < 25)) ?
+	       'A' + card->revision - 1 : '?', membase, srambase,
 	       card->sramsize / 1024);
 
 	if (init_card(dev)) {
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index bb7ef570514c..a3b605a0ca17 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2290,7 +2290,6 @@ static int __devinit ia_init(struct atm_dev *dev)
 	unsigned long real_base;
 	void __iomem *base;
 	unsigned short command;  
-	unsigned char revision;  
 	int error, i; 
 	  
 	/* The device has been identified and registered. Now we read   
@@ -2305,16 +2304,14 @@ static int __devinit ia_init(struct atm_dev *dev)
 	real_base = pci_resource_start (iadev->pci, 0);
 	iadev->irq = iadev->pci->irq;
 		  
-	if ((error = pci_read_config_word(iadev->pci, PCI_COMMAND,&command))   
-		    || (error = pci_read_config_byte(iadev->pci,   
-				PCI_REVISION_ID,&revision)))   
-	{  
+	error = pci_read_config_word(iadev->pci, PCI_COMMAND, &command);
+	if (error) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n",  
 				dev->number,error);  
 		return -EINVAL;  
 	}  
 	IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n",  
-			dev->number, revision, real_base, iadev->irq);)  
+			dev->number, iadev->pci->revision, real_base, iadev->irq);)
 	  
 	/* find mapping size of board */  
 	  
@@ -2353,7 +2350,7 @@ static int __devinit ia_init(struct atm_dev *dev)
 		return error;  
 	}  
 	IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n",  
-			dev->number, revision, base, iadev->irq);)  
+			dev->number, iadev->pci->revision, base, iadev->irq);)
 	  
 	/* filling the iphase dev structure */  
 	iadev->mem = iadev->pci_map_size /2;  
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 09f477d4237a..0e2c1ae650e7 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -246,8 +246,8 @@ struct lanai_vcc {
 };
 
 enum lanai_type {
-	lanai2	= PCI_VENDOR_ID_EF_ATM_LANAI2,
-	lanaihb	= PCI_VENDOR_ID_EF_ATM_LANAIHB
+	lanai2	= PCI_DEVICE_ID_EF_ATM_LANAI2,
+	lanaihb	= PCI_DEVICE_ID_EF_ATM_LANAIHB
 };
 
 struct lanai_dev_stats {
@@ -293,7 +293,6 @@ struct lanai_dev {
 	struct atm_vcc *cbrvcc;
 	int number;
 	int board_rev;
-	u8 pci_revision;
 /* TODO - look at race conditions with maintence of conf1/conf2 */
 /* TODO - transmit locking: should we use _irq not _irqsave? */
 /* TODO - organize above in some rational fashion (see <asm/cache.h>) */
@@ -1969,14 +1968,6 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai)
 		    "(itf %d): No suitable DMA available.\n", lanai->number);
 		return -EBUSY;
 	}
-	/* Get the pci revision byte */
-	result = pci_read_config_byte(pci, PCI_REVISION_ID,
-	    &lanai->pci_revision);
-	if (result != PCIBIOS_SUCCESSFUL) {
-		printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
-		    "PCI_REVISION_ID: %d\n", lanai->number, result);
-		return -EINVAL;
-	}
 	result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w);
 	if (result != PCIBIOS_SUCCESSFUL) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
@@ -2254,7 +2245,7 @@ static int __devinit lanai_dev_open(struct atm_dev *atmdev)
 	lanai_timed_poll_start(lanai);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
 	    "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
-	    (int) lanai->pci_revision, (unsigned long) lanai->base,
+	    (int) lanai->pci->revision, (unsigned long) lanai->base,
 	    lanai->pci->irq,
 	    atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
 	    atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
@@ -2491,7 +2482,7 @@ static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page)
 		    (unsigned int) lanai->magicno, lanai->num_vci);
 	if (left-- == 0)
 		return sprintf(page, "revision: board=%d, pci_if=%d\n",
-		    lanai->board_rev, (int) lanai->pci_revision);
+		    lanai->board_rev, (int) lanai->pci->revision);
 	if (left-- == 0)
 		return sprintf(page, "EEPROM ESI: "
 		    "%02X:%02X:%02X:%02X:%02X:%02X\n",
@@ -2631,14 +2622,8 @@ static int __devinit lanai_init_one(struct pci_dev *pci,
 }
 
 static struct pci_device_id lanai_pci_tbl[] = {
-	{
-		PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAI2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
-	},
-	{
-		PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAIHB,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
-	},
+	{ PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) },
+	{ PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) },
 	{ 0, }	/* terminal entry */
 };
 MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 2ad2527cf5b3..020a87a476c8 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1182,7 +1182,6 @@ static int __devinit zatm_init(struct atm_dev *dev)
 	struct zatm_dev *zatm_dev;
 	struct pci_dev *pci_dev;
 	unsigned short command;
-	unsigned char revision;
 	int error,i,last;
 	unsigned long t0,t1,t2;
 
@@ -1192,8 +1191,7 @@ static int __devinit zatm_init(struct atm_dev *dev)
 	pci_dev = zatm_dev->pci_dev;
 	zatm_dev->base = pci_resource_start(pci_dev, 0);
 	zatm_dev->irq = pci_dev->irq;
-	if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command)) ||
-	    (error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision))) {
+	if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
 		    dev->number,error);
 		return -EINVAL;
@@ -1206,7 +1204,7 @@ static int __devinit zatm_init(struct atm_dev *dev)
 	}
 	eprom_get_esi(dev);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,",
-	    dev->number,revision,zatm_dev->base,zatm_dev->irq);
+	    dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq);
 	/* reset uPD98401 */
 	zout(0,SWR);
 	while (!(zin(GSR) & uPD98401_INT_IND));
diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c
index 1ec0654665cf..7370d7cf5988 100644
--- a/drivers/base/attribute_container.c
+++ b/drivers/base/attribute_container.c
@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 
 #include "base.h"
 
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 5512d84452f2..47eb02d9f1af 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -44,6 +44,6 @@ struct class_device_attribute *to_class_dev_attr(struct attribute *_attr)
 
 extern char *make_class_name(const char *name, struct kobject *kobj);
 
-extern void devres_release_all(struct device *dev);
+extern int devres_release_all(struct device *dev);
 
 extern struct kset devices_subsys;
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index dca734819e50..61c67526a656 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -138,12 +138,24 @@ void bus_remove_file(struct bus_type * bus, struct bus_attribute * attr)
 	}
 }
 
-static struct kobj_type ktype_bus = {
+static struct kobj_type bus_ktype = {
 	.sysfs_ops	= &bus_sysfs_ops,
+};
+
+static int bus_uevent_filter(struct kset *kset, struct kobject *kobj)
+{
+	struct kobj_type *ktype = get_ktype(kobj);
 
+	if (ktype == &bus_ktype)
+		return 1;
+	return 0;
+}
+
+static struct kset_uevent_ops bus_uevent_ops = {
+	.filter = bus_uevent_filter,
 };
 
-static decl_subsys(bus, &ktype_bus, NULL);
+static decl_subsys(bus, &bus_ktype, &bus_uevent_ops);
 
 
 #ifdef CONFIG_HOTPLUG
@@ -562,7 +574,6 @@ static int add_probe_files(struct bus_type *bus)
 
 	bus->drivers_probe_attr.attr.name = "drivers_probe";
 	bus->drivers_probe_attr.attr.mode = S_IWUSR;
-	bus->drivers_probe_attr.attr.owner = bus->owner;
 	bus->drivers_probe_attr.store = store_drivers_probe;
 	retval = bus_create_file(bus, &bus->drivers_probe_attr);
 	if (retval)
@@ -570,7 +581,6 @@ static int add_probe_files(struct bus_type *bus)
 
 	bus->drivers_autoprobe_attr.attr.name = "drivers_autoprobe";
 	bus->drivers_autoprobe_attr.attr.mode = S_IWUSR | S_IRUGO;
-	bus->drivers_autoprobe_attr.attr.owner = bus->owner;
 	bus->drivers_autoprobe_attr.show = show_drivers_autoprobe;
 	bus->drivers_autoprobe_attr.store = store_drivers_autoprobe;
 	retval = bus_create_file(bus, &bus->drivers_autoprobe_attr);
@@ -610,7 +620,8 @@ int bus_add_driver(struct device_driver *drv)
 	if (error)
 		goto out_put_bus;
 	drv->kobj.kset = &bus->drivers;
-	if ((error = kobject_register(&drv->kobj)))
+	error = kobject_register(&drv->kobj);
+	if (error)
 		goto out_put_bus;
 
 	if (drv->bus->drivers_autoprobe) {
@@ -760,7 +771,8 @@ static int bus_add_attrs(struct bus_type * bus)
 
 	if (bus->bus_attrs) {
 		for (i = 0; attr_name(bus->bus_attrs[i]); i++) {
-			if ((error = bus_create_file(bus,&bus->bus_attrs[i])))
+			error = bus_create_file(bus,&bus->bus_attrs[i]);
+			if (error)
 				goto Err;
 		}
 	}
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 8c506dbe3913..4d2222618b78 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -312,9 +312,6 @@ static void class_dev_release(struct kobject * kobj)
 
 	pr_debug("device class '%s': release.\n", cd->class_id);
 
-	kfree(cd->devt_attr);
-	cd->devt_attr = NULL;
-
 	if (cd->release)
 		cd->release(cd);
 	else if (cls->release)
@@ -547,6 +544,9 @@ static ssize_t show_dev(struct class_device *class_dev, char *buf)
 	return print_dev_t(buf, class_dev->devt);
 }
 
+static struct class_device_attribute class_devt_attr =
+	__ATTR(dev, S_IRUGO, show_dev, NULL);
+
 static ssize_t store_uevent(struct class_device *class_dev,
 			    const char *buf, size_t count)
 {
@@ -554,6 +554,9 @@ static ssize_t store_uevent(struct class_device *class_dev,
 	return count;
 }
 
+static struct class_device_attribute class_uevent_attr =
+	__ATTR(uevent, S_IWUSR, NULL, store_uevent);
+
 void class_device_initialize(struct class_device *class_dev)
 {
 	kobj_set_kset_s(class_dev, class_obj_subsys);
@@ -603,32 +606,15 @@ int class_device_add(struct class_device *class_dev)
 				  &parent_class->subsys.kobj, "subsystem");
 	if (error)
 		goto out3;
-	class_dev->uevent_attr.attr.name = "uevent";
-	class_dev->uevent_attr.attr.mode = S_IWUSR;
-	class_dev->uevent_attr.attr.owner = parent_class->owner;
-	class_dev->uevent_attr.store = store_uevent;
-	error = class_device_create_file(class_dev, &class_dev->uevent_attr);
+
+	error = class_device_create_file(class_dev, &class_uevent_attr);
 	if (error)
 		goto out3;
 
 	if (MAJOR(class_dev->devt)) {
-		struct class_device_attribute *attr;
-		attr = kzalloc(sizeof(*attr), GFP_KERNEL);
-		if (!attr) {
-			error = -ENOMEM;
-			goto out4;
-		}
-		attr->attr.name = "dev";
-		attr->attr.mode = S_IRUGO;
-		attr->attr.owner = parent_class->owner;
-		attr->show = show_dev;
-		error = class_device_create_file(class_dev, attr);
-		if (error) {
-			kfree(attr);
+		error = class_device_create_file(class_dev, &class_devt_attr);
+		if (error)
 			goto out4;
-		}
-
-		class_dev->devt_attr = attr;
 	}
 
 	error = class_device_add_attrs(class_dev);
@@ -671,10 +657,10 @@ int class_device_add(struct class_device *class_dev)
  out6:
 	class_device_remove_attrs(class_dev);
  out5:
-	if (class_dev->devt_attr)
-		class_device_remove_file(class_dev, class_dev->devt_attr);
+	if (MAJOR(class_dev->devt))
+		class_device_remove_file(class_dev, &class_devt_attr);
  out4:
-	class_device_remove_file(class_dev, &class_dev->uevent_attr);
+	class_device_remove_file(class_dev, &class_uevent_attr);
  out3:
 	kobject_del(&class_dev->kobj);
  out2:
@@ -774,9 +760,9 @@ void class_device_del(struct class_device *class_dev)
 		sysfs_remove_link(&class_dev->kobj, "device");
 	}
 	sysfs_remove_link(&class_dev->kobj, "subsystem");
-	class_device_remove_file(class_dev, &class_dev->uevent_attr);
-	if (class_dev->devt_attr)
-		class_device_remove_file(class_dev, class_dev->devt_attr);
+	class_device_remove_file(class_dev, &class_uevent_attr);
+	if (MAJOR(class_dev->devt))
+		class_device_remove_file(class_dev, &class_devt_attr);
 	class_device_remove_attrs(class_dev);
 	class_device_remove_groups(class_dev);
 
diff --git a/drivers/base/core.c b/drivers/base/core.c
index dd40d78a023d..0455aa78fa13 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -310,6 +310,9 @@ static ssize_t store_uevent(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
+static struct device_attribute uevent_attr =
+	__ATTR(uevent, S_IRUGO | S_IWUSR, show_uevent, store_uevent);
+
 static int device_add_attributes(struct device *dev,
 				 struct device_attribute *attrs)
 {
@@ -423,6 +426,9 @@ static ssize_t show_dev(struct device *dev, struct device_attribute *attr,
 	return print_dev_t(buf, dev->devt);
 }
 
+static struct device_attribute devt_attr =
+	__ATTR(dev, S_IRUGO, show_dev, NULL);
+
 /*
  *	devices_subsys - structure to be registered with kobject core.
  */
@@ -681,35 +687,14 @@ int device_add(struct device *dev)
 		blocking_notifier_call_chain(&dev->bus->bus_notifier,
 					     BUS_NOTIFY_ADD_DEVICE, dev);
 
-	dev->uevent_attr.attr.name = "uevent";
-	dev->uevent_attr.attr.mode = S_IRUGO | S_IWUSR;
-	if (dev->driver)
-		dev->uevent_attr.attr.owner = dev->driver->owner;
-	dev->uevent_attr.store = store_uevent;
-	dev->uevent_attr.show = show_uevent;
-	error = device_create_file(dev, &dev->uevent_attr);
+	error = device_create_file(dev, &uevent_attr);
 	if (error)
 		goto attrError;
 
 	if (MAJOR(dev->devt)) {
-		struct device_attribute *attr;
-		attr = kzalloc(sizeof(*attr), GFP_KERNEL);
-		if (!attr) {
-			error = -ENOMEM;
-			goto ueventattrError;
-		}
-		attr->attr.name = "dev";
-		attr->attr.mode = S_IRUGO;
-		if (dev->driver)
-			attr->attr.owner = dev->driver->owner;
-		attr->show = show_dev;
-		error = device_create_file(dev, attr);
-		if (error) {
-			kfree(attr);
+		error = device_create_file(dev, &devt_attr);
+		if (error)
 			goto ueventattrError;
-		}
-
-		dev->devt_attr = attr;
 	}
 
 	if (dev->class) {
@@ -733,11 +718,14 @@ int device_add(struct device *dev)
 		}
 	}
 
-	if ((error = device_add_attrs(dev)))
+	error = device_add_attrs(dev);
+	if (error)
 		goto AttrsError;
-	if ((error = device_pm_add(dev)))
+	error = device_pm_add(dev);
+	if (error)
 		goto PMError;
-	if ((error = bus_add_device(dev)))
+	error = bus_add_device(dev);
+	if (error)
 		goto BusError;
 	kobject_uevent(&dev->kobj, KOBJ_ADD);
 	bus_attach_device(dev);
@@ -767,10 +755,8 @@ int device_add(struct device *dev)
 					     BUS_NOTIFY_DEL_DEVICE, dev);
 	device_remove_attrs(dev);
  AttrsError:
-	if (dev->devt_attr) {
-		device_remove_file(dev, dev->devt_attr);
-		kfree(dev->devt_attr);
-	}
+	if (MAJOR(dev->devt))
+		device_remove_file(dev, &devt_attr);
 
 	if (dev->class) {
 		sysfs_remove_link(&dev->kobj, "subsystem");
@@ -792,7 +778,7 @@ int device_add(struct device *dev)
 		}
 	}
  ueventattrError:
-	device_remove_file(dev, &dev->uevent_attr);
+	device_remove_file(dev, &uevent_attr);
  attrError:
 	kobject_uevent(&dev->kobj, KOBJ_REMOVE);
 	kobject_del(&dev->kobj);
@@ -869,10 +855,8 @@ void device_del(struct device * dev)
 
 	if (parent)
 		klist_del(&dev->knode_parent);
-	if (dev->devt_attr) {
-		device_remove_file(dev, dev->devt_attr);
-		kfree(dev->devt_attr);
-	}
+	if (MAJOR(dev->devt))
+		device_remove_file(dev, &devt_attr);
 	if (dev->class) {
 		sysfs_remove_link(&dev->kobj, "subsystem");
 		/* If this is not a "fake" compatible device, remove the
@@ -926,7 +910,7 @@ void device_del(struct device * dev)
 			up(&dev->class->sem);
 		}
 	}
-	device_remove_file(dev, &dev->uevent_attr);
+	device_remove_file(dev, &uevent_attr);
 	device_remove_attrs(dev);
 	bus_remove_device(dev);
 
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index b0088b0efecd..7ac474db88c5 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -281,24 +281,16 @@ int driver_attach(struct device_driver * drv)
 	return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
 }
 
-/**
- *	device_release_driver - manually detach device from driver.
- *	@dev:	device.
- *
- *	Manually detach device from driver.
- *
+/*
  *	__device_release_driver() must be called with @dev->sem held.
- *	When called for a USB interface, @dev->parent->sem must be held
- *	as well.
+ *	When called for a USB interface, @dev->parent->sem must be held as well.
  */
-
 static void __device_release_driver(struct device * dev)
 {
 	struct device_driver * drv;
 
-	drv = dev->driver;
+	drv = get_driver(dev->driver);
 	if (drv) {
-		get_driver(drv);
 		driver_sysfs_remove(dev);
 		sysfs_remove_link(&dev->kobj, "driver");
 		klist_remove(&dev->knode_driver);
@@ -318,6 +310,13 @@ static void __device_release_driver(struct device * dev)
 	}
 }
 
+/**
+ *	device_release_driver - manually detach device from driver.
+ *	@dev:	device.
+ *
+ *	Manually detach device from driver.
+ *	When called for a USB interface, @dev->parent->sem must be held.
+ */
 void device_release_driver(struct device * dev)
 {
 	/*
diff --git a/drivers/base/devres.c b/drivers/base/devres.c
index e1c0730a3b99..e8beb8e5b626 100644
--- a/drivers/base/devres.c
+++ b/drivers/base/devres.c
@@ -10,6 +10,8 @@
 #include <linux/device.h>
 #include <linux/module.h>
 
+#include "base.h"
+
 struct devres_node {
 	struct list_head		entry;
 	dr_release_t			release;
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 89a5f4a54913..53f0ee6f3016 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -175,7 +175,7 @@ static ssize_t firmware_loading_store(struct device *dev,
 static DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store);
 
 static ssize_t
-firmware_data_read(struct kobject *kobj,
+firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
 		   char *buffer, loff_t offset, size_t count)
 {
 	struct device *dev = to_dev(kobj);
@@ -240,7 +240,7 @@ fw_realloc_buffer(struct firmware_priv *fw_priv, int min_size)
  *	the driver as a firmware image.
  **/
 static ssize_t
-firmware_data_write(struct kobject *kobj,
+firmware_data_write(struct kobject *kobj, struct bin_attribute *bin_attr,
 		    char *buffer, loff_t offset, size_t count)
 {
 	struct device *dev = to_dev(kobj);
@@ -271,7 +271,7 @@ out:
 }
 
 static struct bin_attribute firmware_attr_data_tmpl = {
-	.attr = {.name = "data", .mode = 0644, .owner = THIS_MODULE},
+	.attr = {.name = "data", .mode = 0644},
 	.size = 0,
 	.read = firmware_data_read,
 	.write = firmware_data_write,
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 05dc8764e765..eb9f38d0aa58 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -20,64 +20,44 @@
  */
 
 #include <linux/device.h>
+#include <linux/mutex.h>
+
 #include "power.h"
 
 LIST_HEAD(dpm_active);
 LIST_HEAD(dpm_off);
 LIST_HEAD(dpm_off_irq);
 
-DECLARE_MUTEX(dpm_sem);
-DECLARE_MUTEX(dpm_list_sem);
+DEFINE_MUTEX(dpm_mtx);
+DEFINE_MUTEX(dpm_list_mtx);
 
 int (*platform_enable_wakeup)(struct device *dev, int is_on);
 
-
-/**
- *	device_pm_set_parent - Specify power dependency.
- *	@dev:		Device who needs power.
- *	@parent:	Device that supplies power.
- *
- *	This function is used to manually describe a power-dependency
- *	relationship. It may be used to specify a transversal relationship
- *	(where the power supplier is not the physical (or electrical)
- *	ancestor of a specific device.
- *	The effect of this is that the supplier will not be powered down
- *	before the power dependent.
- */
-
-void device_pm_set_parent(struct device * dev, struct device * parent)
-{
-	put_device(dev->power.pm_parent);
-	dev->power.pm_parent = get_device(parent);
-}
-EXPORT_SYMBOL_GPL(device_pm_set_parent);
-
-int device_pm_add(struct device * dev)
+int device_pm_add(struct device *dev)
 {
 	int error;
 
 	pr_debug("PM: Adding info for %s:%s\n",
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
-	down(&dpm_list_sem);
+	mutex_lock(&dpm_list_mtx);
 	list_add_tail(&dev->power.entry, &dpm_active);
-	device_pm_set_parent(dev, dev->parent);
-	if ((error = dpm_sysfs_add(dev)))
+	error = dpm_sysfs_add(dev);
+	if (error)
 		list_del(&dev->power.entry);
-	up(&dpm_list_sem);
+	mutex_unlock(&dpm_list_mtx);
 	return error;
 }
 
-void device_pm_remove(struct device * dev)
+void device_pm_remove(struct device *dev)
 {
 	pr_debug("PM: Removing info for %s:%s\n",
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
-	down(&dpm_list_sem);
+	mutex_lock(&dpm_list_mtx);
 	dpm_sysfs_remove(dev);
-	put_device(dev->power.pm_parent);
 	list_del_init(&dev->power.entry);
-	up(&dpm_list_sem);
+	mutex_unlock(&dpm_list_mtx);
 }
 
 
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index fb3d35a9e101..2760f25b3ac5 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -14,12 +14,12 @@ extern void device_shutdown(void);
 /*
  * Used to synchronize global power management operations.
  */
-extern struct semaphore dpm_sem;
+extern struct mutex dpm_mtx;
 
 /*
  * Used to serialize changes to the dpm_* lists.
  */
-extern struct semaphore dpm_list_sem;
+extern struct mutex dpm_list_mtx;
 
 /*
  * The PM lists.
diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index a2c64188d713..00fd84ae6e66 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -29,14 +29,6 @@ int resume_device(struct device * dev)
 
 	down(&dev->sem);
 
-	if (dev->power.pm_parent
-			&& dev->power.pm_parent->power.power_state.event) {
-		dev_err(dev, "PM: resume from %d, parent %s still %d\n",
-			dev->power.power_state.event,
-			dev->power.pm_parent->bus_id,
-			dev->power.pm_parent->power.power_state.event);
-	}
-
 	if (dev->bus && dev->bus->resume) {
 		dev_dbg(dev,"resuming\n");
 		error = dev->bus->resume(dev);
@@ -80,7 +72,7 @@ static int resume_device_early(struct device * dev)
  */
 void dpm_resume(void)
 {
-	down(&dpm_list_sem);
+	mutex_lock(&dpm_list_mtx);
 	while(!list_empty(&dpm_off)) {
 		struct list_head * entry = dpm_off.next;
 		struct device * dev = to_device(entry);
@@ -88,13 +80,12 @@ void dpm_resume(void)
 		get_device(dev);
 		list_move_tail(entry, &dpm_active);
 
-		up(&dpm_list_sem);
-		if (!dev->power.prev_state.event)
-			resume_device(dev);
-		down(&dpm_list_sem);
+		mutex_unlock(&dpm_list_mtx);
+		resume_device(dev);
+		mutex_lock(&dpm_list_mtx);
 		put_device(dev);
 	}
-	up(&dpm_list_sem);
+	mutex_unlock(&dpm_list_mtx);
 }
 
 
@@ -108,9 +99,9 @@ void dpm_resume(void)
 void device_resume(void)
 {
 	might_sleep();
-	down(&dpm_sem);
+	mutex_lock(&dpm_mtx);
 	dpm_resume();
-	up(&dpm_sem);
+	mutex_unlock(&dpm_mtx);
 }
 
 EXPORT_SYMBOL_GPL(device_resume);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 96370ec1d673..df6174d85866 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -32,9 +32,9 @@ static void runtime_resume(struct device * dev)
 
 void dpm_runtime_resume(struct device * dev)
 {
-	down(&dpm_sem);
+	mutex_lock(&dpm_mtx);
 	runtime_resume(dev);
-	up(&dpm_sem);
+	mutex_unlock(&dpm_mtx);
 }
 EXPORT_SYMBOL(dpm_runtime_resume);
 
@@ -49,7 +49,7 @@ int dpm_runtime_suspend(struct device * dev, pm_message_t state)
 {
 	int error = 0;
 
-	down(&dpm_sem);
+	mutex_lock(&dpm_mtx);
 	if (dev->power.power_state.event == state.event)
 		goto Done;
 
@@ -59,7 +59,7 @@ int dpm_runtime_suspend(struct device * dev, pm_message_t state)
 	if (!(error = suspend_device(dev, state)))
 		dev->power.power_state = state;
  Done:
-	up(&dpm_sem);
+	mutex_unlock(&dpm_mtx);
 	return error;
 }
 EXPORT_SYMBOL(dpm_runtime_suspend);
@@ -78,8 +78,8 @@ EXPORT_SYMBOL(dpm_runtime_suspend);
  */
 void dpm_set_power_state(struct device * dev, pm_message_t state)
 {
-	down(&dpm_sem);
+	mutex_lock(&dpm_mtx);
 	dev->power.power_state = state;
-	up(&dpm_sem);
+	mutex_unlock(&dpm_mtx);
 }
 #endif  /*  0  */
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index 42d2b86ba765..26df9b231737 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -40,6 +40,14 @@ static inline char *suspend_verb(u32 event)
 }
 
 
+static void
+suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
+{
+	dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event),
+		((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ?
+		", may wakeup" : "");
+}
+
 /**
  *	suspend_device - Save state of one device.
  *	@dev:	Device.
@@ -55,49 +63,21 @@ int suspend_device(struct device * dev, pm_message_t state)
 		dev_dbg(dev, "PM: suspend %d-->%d\n",
 			dev->power.power_state.event, state.event);
 	}
-	if (dev->power.pm_parent
-			&& dev->power.pm_parent->power.power_state.event) {
-		dev_err(dev,
-			"PM: suspend %d->%d, parent %s already %d\n",
-			dev->power.power_state.event, state.event,
-			dev->power.pm_parent->bus_id,
-			dev->power.pm_parent->power.power_state.event);
-	}
-
-	dev->power.prev_state = dev->power.power_state;
 
-	if (dev->class && dev->class->suspend && !dev->power.power_state.event) {
-		dev_dbg(dev, "class %s%s\n",
-			suspend_verb(state.event),
-			((state.event == PM_EVENT_SUSPEND)
-					&& device_may_wakeup(dev))
-				? ", may wakeup"
-				: ""
-			);
+	if (dev->class && dev->class->suspend) {
+		suspend_device_dbg(dev, state, "class ");
 		error = dev->class->suspend(dev, state);
 		suspend_report_result(dev->class->suspend, error);
 	}
 
-	if (!error && dev->type && dev->type->suspend && !dev->power.power_state.event) {
-		dev_dbg(dev, "%s%s\n",
-			suspend_verb(state.event),
-			((state.event == PM_EVENT_SUSPEND)
-					&& device_may_wakeup(dev))
-				? ", may wakeup"
-				: ""
-			);
+	if (!error && dev->type && dev->type->suspend) {
+		suspend_device_dbg(dev, state, "type ");
 		error = dev->type->suspend(dev, state);
 		suspend_report_result(dev->type->suspend, error);
 	}
 
-	if (!error && dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
-		dev_dbg(dev, "%s%s\n",
-			suspend_verb(state.event),
-			((state.event == PM_EVENT_SUSPEND)
-					&& device_may_wakeup(dev))
-				? ", may wakeup"
-				: ""
-			);
+	if (!error && dev->bus && dev->bus->suspend) {
+		suspend_device_dbg(dev, state, "");
 		error = dev->bus->suspend(dev, state);
 		suspend_report_result(dev->bus->suspend, error);
 	}
@@ -108,21 +88,15 @@ int suspend_device(struct device * dev, pm_message_t state)
 
 /*
  * This is called with interrupts off, only a single CPU
- * running. We can't do down() on a semaphore (and we don't
+ * running. We can't acquire a mutex or semaphore (and we don't
  * need the protection)
  */
 static int suspend_device_late(struct device *dev, pm_message_t state)
 {
 	int error = 0;
 
-	if (dev->bus && dev->bus->suspend_late && !dev->power.power_state.event) {
-		dev_dbg(dev, "LATE %s%s\n",
-			suspend_verb(state.event),
-			((state.event == PM_EVENT_SUSPEND)
-					&& device_may_wakeup(dev))
-				? ", may wakeup"
-				: ""
-			);
+	if (dev->bus && dev->bus->suspend_late) {
+		suspend_device_dbg(dev, state, "LATE ");
 		error = dev->bus->suspend_late(dev, state);
 		suspend_report_result(dev->bus->suspend_late, error);
 	}
@@ -153,18 +127,18 @@ int device_suspend(pm_message_t state)
 	int error = 0;
 
 	might_sleep();
-	down(&dpm_sem);
-	down(&dpm_list_sem);
+	mutex_lock(&dpm_mtx);
+	mutex_lock(&dpm_list_mtx);
 	while (!list_empty(&dpm_active) && error == 0) {
 		struct list_head * entry = dpm_active.prev;
 		struct device * dev = to_device(entry);
 
 		get_device(dev);
-		up(&dpm_list_sem);
+		mutex_unlock(&dpm_list_mtx);
 
 		error = suspend_device(dev, state);
 
-		down(&dpm_list_sem);
+		mutex_lock(&dpm_list_mtx);
 
 		/* Check if the device got removed */
 		if (!list_empty(&dev->power.entry)) {
@@ -179,11 +153,11 @@ int device_suspend(pm_message_t state)
 				error == -EAGAIN ? " (please convert to suspend_late)" : "");
 		put_device(dev);
 	}
-	up(&dpm_list_sem);
+	mutex_unlock(&dpm_list_mtx);
 	if (error)
 		dpm_resume();
 
-	up(&dpm_sem);
+	mutex_unlock(&dpm_mtx);
 	return error;
 }
 
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 29f1291966c1..18febe26caa1 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -21,7 +21,7 @@
 #include <linux/string.h>
 #include <linux/pm.h>
 #include <linux/device.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 
 #include "base.h"
 
@@ -155,7 +155,7 @@ EXPORT_SYMBOL_GPL(sysdev_class_unregister);
 
 
 static LIST_HEAD(sysdev_drivers);
-static DECLARE_MUTEX(sysdev_drivers_lock);
+static DEFINE_MUTEX(sysdev_drivers_lock);
 
 /**
  *	sysdev_driver_register - Register auxillary driver
@@ -172,7 +172,7 @@ static DECLARE_MUTEX(sysdev_drivers_lock);
 int sysdev_driver_register(struct sysdev_class * cls,
 			   struct sysdev_driver * drv)
 {
-	down(&sysdev_drivers_lock);
+	mutex_lock(&sysdev_drivers_lock);
 	if (cls && kset_get(&cls->kset)) {
 		list_add_tail(&drv->entry, &cls->drivers);
 
@@ -184,7 +184,7 @@ int sysdev_driver_register(struct sysdev_class * cls,
 		}
 	} else
 		list_add_tail(&drv->entry, &sysdev_drivers);
-	up(&sysdev_drivers_lock);
+	mutex_unlock(&sysdev_drivers_lock);
 	return 0;
 }
 
@@ -197,7 +197,7 @@ int sysdev_driver_register(struct sysdev_class * cls,
 void sysdev_driver_unregister(struct sysdev_class * cls,
 			      struct sysdev_driver * drv)
 {
-	down(&sysdev_drivers_lock);
+	mutex_lock(&sysdev_drivers_lock);
 	list_del_init(&drv->entry);
 	if (cls) {
 		if (drv->remove) {
@@ -207,7 +207,7 @@ void sysdev_driver_unregister(struct sysdev_class * cls,
 		}
 		kset_put(&cls->kset);
 	}
-	up(&sysdev_drivers_lock);
+	mutex_unlock(&sysdev_drivers_lock);
 }
 
 EXPORT_SYMBOL_GPL(sysdev_driver_register);
@@ -246,7 +246,7 @@ int sysdev_register(struct sys_device * sysdev)
 	if (!error) {
 		struct sysdev_driver * drv;
 
-		down(&sysdev_drivers_lock);
+		mutex_lock(&sysdev_drivers_lock);
 		/* Generic notification is implicit, because it's that
 		 * code that should have called us.
 		 */
@@ -262,7 +262,7 @@ int sysdev_register(struct sys_device * sysdev)
 			if (drv->add)
 				drv->add(sysdev);
 		}
-		up(&sysdev_drivers_lock);
+		mutex_unlock(&sysdev_drivers_lock);
 	}
 	return error;
 }
@@ -271,7 +271,7 @@ void sysdev_unregister(struct sys_device * sysdev)
 {
 	struct sysdev_driver * drv;
 
-	down(&sysdev_drivers_lock);
+	mutex_lock(&sysdev_drivers_lock);
 	list_for_each_entry(drv, &sysdev_drivers, entry) {
 		if (drv->remove)
 			drv->remove(sysdev);
@@ -281,7 +281,7 @@ void sysdev_unregister(struct sys_device * sysdev)
 		if (drv->remove)
 			drv->remove(sysdev);
 	}
-	up(&sysdev_drivers_lock);
+	mutex_unlock(&sysdev_drivers_lock);
 
 	kobject_unregister(&sysdev->kobj);
 }
@@ -308,7 +308,7 @@ void sysdev_shutdown(void)
 
 	pr_debug("Shutting Down System Devices\n");
 
-	down(&sysdev_drivers_lock);
+	mutex_lock(&sysdev_drivers_lock);
 	list_for_each_entry_reverse(cls, &system_subsys.list,
 				    kset.kobj.entry) {
 		struct sys_device * sysdev;
@@ -337,7 +337,7 @@ void sysdev_shutdown(void)
 				cls->shutdown(sysdev);
 		}
 	}
-	up(&sysdev_drivers_lock);
+	mutex_unlock(&sysdev_drivers_lock);
 }
 
 static void __sysdev_resume(struct sys_device *dev)
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index b4c8319138b2..6e23af1ecbdb 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -2,9 +2,12 @@
 # Block device driver configuration
 #
 
-if BLOCK
+menuconfig BLK_DEV
+	bool "Block devices"
+	depends on BLOCK
+	default y
 
-menu "Block devices"
+if BLK_DEV
 
 config BLK_DEV_FD
 	tristate "Normal floppy disk support"
@@ -56,40 +59,9 @@ config AMIGA_Z2RAM
 	  To compile this driver as a module, choose M here: the
 	  module will be called z2ram.
 
-config ATARI_ACSI
-	tristate "Atari ACSI support"
-	depends on ATARI && BROKEN
-	---help---
-	  This enables support for the Atari ACSI interface. The driver
-	  supports hard disks and CD-ROMs, which have 512-byte sectors, or can
-	  be switched to that mode. Due to the ACSI command format, only disks
-	  up to 1 GB are supported. Special support for certain ACSI to SCSI
-	  adapters, which could relax that, isn't included yet. The ACSI
-	  driver is also the basis for certain other drivers for devices
-	  attached to the ACSI bus: Atari SLM laser printer, BioNet-100
-	  Ethernet, and PAMsNet Ethernet. If you want to use one of these
-	  devices, you need ACSI support, too.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acsi.
-
-comment "Some devices (e.g. CD jukebox) support multiple LUNs"
-	depends on ATARI && ATARI_ACSI
-
-config ACSI_MULTI_LUN
-	bool "Probe all LUNs on each ACSI device"
-	depends on ATARI_ACSI
-	help
-	  If you have a ACSI device that supports more than one LUN (Logical
-	  Unit Number), e.g. a CD jukebox, you should say Y here so that all
-	  will be found by the ACSI driver. An ACSI device with multiple LUNs
-	  acts logically like multiple ACSI devices. The vast majority of ACSI
-	  devices have only one LUN, and so most people can say N here and
-	  should in fact do so, because it is safer.
-
 config ATARI_SLM
 	tristate "Atari SLM laser printer support"
-	depends on ATARI && ATARI_ACSI!=n
+	depends on ATARI
 	help
 	  If you have an Atari SLM laser printer, say Y to include support for
 	  it in the kernel. Otherwise, say N. This driver is also available as
@@ -453,6 +425,4 @@ config ATA_OVER_ETH
 
 source "drivers/s390/block/Kconfig"
 
-endmenu
-
-endif
+endif # BLK_DEV
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index dd88e33c1eb1..e5f98acc5d52 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o
 obj-$(CONFIG_BLK_DEV_FD)	+= floppy.o
 obj-$(CONFIG_AMIGA_FLOPPY)	+= amiflop.o
 obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
-obj-$(CONFIG_ATARI_ACSI)	+= acsi.o
 obj-$(CONFIG_ATARI_SLM)		+= acsi_slm.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= rd.o
diff --git a/drivers/block/acsi.c b/drivers/block/acsi.c
deleted file mode 100644
index e3d9152e231a..000000000000
--- a/drivers/block/acsi.c
+++ /dev/null
@@ -1,1825 +0,0 @@
-/*
- * acsi.c -- Device driver for Atari ACSI hard disks
- *
- * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * Some parts are based on hd.c by Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive for
- * more details.
- *
- */
-
-/*
- * Still to in this file:
- *  - If a command ends with an error status (!= 0), the following
- *    REQUEST SENSE commands (4 to fill the ST-DMA FIFO) are done by
- *    polling the _IRQ signal (not interrupt-driven). This should be
- *    avoided in future because it takes up a non-neglectible time in
- *    the interrupt service routine while interrupts are disabled.
- *    Maybe a timer interrupt will get lost :-(
- */
-
-/*
- * General notes:
- *
- *  - All ACSI devices (disks, CD-ROMs, ...) use major number 28.
- *    Minors are organized like it is with SCSI: The upper 4 bits
- *    identify the device, the lower 4 bits the partition.
- *    The device numbers (the upper 4 bits) are given in the same
- *    order as the devices are found on the bus.
- *  - Up to 8 LUNs are supported for each target (if CONFIG_ACSI_MULTI_LUN
- *    is defined), but only a total of 16 devices (due to minor
- *    numbers...). Note that Atari allows only a maximum of 4 targets
- *    (i.e. controllers, not devices) on the ACSI bus!
- *  - A optimizing scheme similar to SCSI scatter-gather is implemented.
- *  - Removable media are supported. After a medium change to device
- *    is reinitialized (partition check etc.). Also, if the device
- *    knows the PREVENT/ALLOW MEDIUM REMOVAL command, the door should
- *    be locked and unlocked when mounting the first or unmounting the
- *    last filesystem on the device. The code is untested, because I
- *    don't have a removable hard disk.
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/genhd.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <scsi/scsi.h> /* for SCSI_IOCTL_GET_IDLUN */
-#include <scsi/scsi_ioctl.h>
-#include <linux/hdreg.h> /* for HDIO_GETGEO */
-#include <linux/blkpg.h>
-#include <linux/buffer_head.h>
-#include <linux/blkdev.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/atari_acsi.h>
-#include <asm/atari_stdma.h>
-#include <asm/atari_stram.h>
-
-static void (*do_acsi)(void) = NULL;
-static struct request_queue *acsi_queue;
-#define QUEUE (acsi_queue)
-#define CURRENT elv_next_request(acsi_queue)
-
-#define DEBUG
-#undef DEBUG_DETECT
-#undef NO_WRITE
-
-#define MAX_ERRORS     		8	/* Max read/write errors/sector */
-#define MAX_LUN				8	/* Max LUNs per target */
-#define MAX_DEV		   		16
-
-#define ACSI_BUFFER_SIZE			(16*1024) /* "normal" ACSI buffer size */
-#define ACSI_BUFFER_MINSIZE			(2048) 	  /* min. buf size if ext. DMA */
-#define ACSI_BUFFER_SIZE_ORDER	 	2		  /* order size for above */
-#define ACSI_BUFFER_MINSIZE_ORDER	0 	  	  /* order size for above */
-#define ACSI_BUFFER_SECTORS	(ACSI_BUFFER_SIZE/512)
-
-#define ACSI_BUFFER_ORDER \
-	(ATARIHW_PRESENT(EXTD_DMA) ? \
-	 ACSI_BUFFER_MINSIZE_ORDER : \
-	 ACSI_BUFFER_SIZE_ORDER)
-
-#define ACSI_TIMEOUT		(4*HZ)
-
-/* minimum delay between two commands */
-
-#define COMMAND_DELAY 500
-
-typedef enum {
-	NONE, HARDDISK, CDROM
-} ACSI_TYPE;
-
-struct acsi_info_struct {
-	ACSI_TYPE		type;			/* type of device */
-	unsigned		target;			/* target number */
-	unsigned		lun;			/* LUN in target controller */
-	unsigned		removable : 1;	/* Flag for removable media */
-	unsigned		read_only : 1;	/* Flag for read only devices */
-	unsigned		old_atari_disk : 1; /* Is an old Atari disk       */
-	unsigned		changed : 1;	/* Medium has been changed */
-	unsigned long 	size;			/* #blocks */
-	int access_count;
-} acsi_info[MAX_DEV];
-
-/*
- *	SENSE KEYS
- */
-
-#define NO_SENSE		0x00
-#define RECOVERED_ERROR 	0x01
-#define NOT_READY		0x02
-#define MEDIUM_ERROR		0x03
-#define HARDWARE_ERROR		0x04
-#define ILLEGAL_REQUEST 	0x05
-#define UNIT_ATTENTION		0x06
-#define DATA_PROTECT		0x07
-#define BLANK_CHECK		0x08
-#define COPY_ABORTED		0x0a
-#define ABORTED_COMMAND 	0x0b
-#define VOLUME_OVERFLOW 	0x0d
-#define MISCOMPARE		0x0e
-
-
-/*
- *	DEVICE TYPES
- */
-
-#define TYPE_DISK	0x00
-#define TYPE_TAPE	0x01
-#define TYPE_WORM	0x04
-#define TYPE_ROM	0x05
-#define TYPE_MOD	0x07
-#define TYPE_NO_LUN	0x7f
-
-/* The data returned by MODE SENSE differ between the old Atari
- * hard disks and SCSI disks connected to ACSI. In the following, both
- * formats are defined and some macros to operate on them potably.
- */
-
-typedef struct {
-	unsigned long	dummy[2];
-	unsigned long	sector_size;
-	unsigned char	format_code;
-#define ATARI_SENSE_FORMAT_FIX	1	
-#define ATARI_SENSE_FORMAT_CHNG	2
-	unsigned char	cylinders_h;
-	unsigned char	cylinders_l;
-	unsigned char	heads;
-	unsigned char	reduced_h;
-	unsigned char	reduced_l;
-	unsigned char	precomp_h;
-	unsigned char	precomp_l;
-	unsigned char	landing_zone;
-	unsigned char	steprate;
-	unsigned char	type;
-#define ATARI_SENSE_TYPE_FIXCHNG_MASK		4
-#define ATARI_SENSE_TYPE_SOFTHARD_MASK		8
-#define ATARI_SENSE_TYPE_FIX				4
-#define ATARI_SENSE_TYPE_CHNG				0
-#define ATARI_SENSE_TYPE_SOFT				0
-#define ATARI_SENSE_TYPE_HARD				8
-	unsigned char	sectors;
-} ATARI_SENSE_DATA;
-
-#define ATARI_CAPACITY(sd) \
-	(((int)((sd).cylinders_h<<8)|(sd).cylinders_l) * \
-	 (sd).heads * (sd).sectors)
-
-
-typedef struct {
-	unsigned char   dummy1;
-	unsigned char   medium_type;
-	unsigned char   dummy2;
-	unsigned char   descriptor_size;
-	unsigned long   block_count;
-	unsigned long   sector_size;
-	/* Page 0 data */
-	unsigned char	page_code;
-	unsigned char	page_size;
-	unsigned char	page_flags;
-	unsigned char	qualifier;
-} SCSI_SENSE_DATA;
-
-#define SCSI_CAPACITY(sd) 	((sd).block_count & 0xffffff)
-
-
-typedef union {
-	ATARI_SENSE_DATA	atari;
-	SCSI_SENSE_DATA		scsi;
-} SENSE_DATA;
-
-#define SENSE_TYPE_UNKNOWN	0
-#define SENSE_TYPE_ATARI	1
-#define SENSE_TYPE_SCSI		2
-
-#define SENSE_TYPE(sd)										\
-	(((sd).atari.dummy[0] == 8 &&							\
-	  ((sd).atari.format_code == 1 ||						\
-	   (sd).atari.format_code == 2)) ? SENSE_TYPE_ATARI :	\
-	 ((sd).scsi.dummy1 >= 11) ? SENSE_TYPE_SCSI :			\
-	 SENSE_TYPE_UNKNOWN)
-	 
-#define CAPACITY(sd)							\
-	(SENSE_TYPE(sd) == SENSE_TYPE_ATARI ?		\
-	 ATARI_CAPACITY((sd).atari) :				\
-	 SCSI_CAPACITY((sd).scsi))
-
-#define SECTOR_SIZE(sd)							\
-	(SENSE_TYPE(sd) == SENSE_TYPE_ATARI ?		\
-	 (sd).atari.sector_size :					\
-	 (sd).scsi.sector_size & 0xffffff)
-
-/* Default size if capacity cannot be determined (1 GByte) */
-#define	DEFAULT_SIZE	0x1fffff
-
-#define CARTRCH_STAT(aip,buf)						\
-	(aip->old_atari_disk ?						\
-	 (((buf)[0] & 0x7f) == 0x28) :					\
-	 ((((buf)[0] & 0x70) == 0x70) ?					\
-	  (((buf)[2] & 0x0f) == 0x06) :					\
-	  (((buf)[0] & 0x0f) == 0x06)))					\
-
-/* These two are also exported to other drivers that work on the ACSI bus and
- * need an ST-RAM buffer. */
-char 			*acsi_buffer;
-unsigned long 	phys_acsi_buffer;
-
-static int NDevices;
-
-static int				CurrentNReq;
-static int				CurrentNSect;
-static char				*CurrentBuffer;
-
-static DEFINE_SPINLOCK(acsi_lock);
-
-
-#define SET_TIMER()	mod_timer(&acsi_timer, jiffies + ACSI_TIMEOUT)
-#define CLEAR_TIMER()	del_timer(&acsi_timer)
-
-static unsigned long	STramMask;
-#define STRAM_ADDR(a)	(((a) & STramMask) == 0)
-
-
-
-/* ACSI commands */
-
-static char tur_cmd[6]        = { 0x00, 0, 0, 0, 0, 0 };
-static char modesense_cmd[6]  = { 0x1a, 0, 0, 0, 24, 0 };
-static char modeselect_cmd[6] = { 0x15, 0, 0, 0, 12, 0 };
-static char inquiry_cmd[6]    = { 0x12, 0, 0, 0,255, 0 };
-static char reqsense_cmd[6]   = { 0x03, 0, 0, 0, 4, 0 };
-static char read_cmd[6]       = { 0x08, 0, 0, 0, 0, 0 };
-static char write_cmd[6]      = { 0x0a, 0, 0, 0, 0, 0 };
-static char pa_med_rem_cmd[6] = { 0x1e, 0, 0, 0, 0, 0 };
-
-#define CMDSET_TARG_LUN(cmd,targ,lun)			\
-    do {						\
-		cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5;	\
-		cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5;	\
-	} while(0)
-
-#define CMDSET_BLOCK(cmd,blk)						\
-    do {											\
-		unsigned long __blk = (blk);				\
-		cmd[3] = __blk; __blk >>= 8;				\
-		cmd[2] = __blk; __blk >>= 8;				\
-		cmd[1] = (cmd[1] & 0xe0) | (__blk & 0x1f);	\
-	} while(0)
-
-#define CMDSET_LEN(cmd,len)						\
-	do {										\
-		cmd[4] = (len);							\
-	} while(0)
-
-/* ACSI errors (from REQUEST SENSE); There are two tables, one for the
- * old Atari disks and one for SCSI on ACSI disks.
- */
-
-struct acsi_error {
-	unsigned char	code;
-	const char		*text;
-} atari_acsi_errors[] = {
-	{ 0x00, "No error (??)" },
-	{ 0x01, "No index pulses" },
-	{ 0x02, "Seek not complete" },
-	{ 0x03, "Write fault" },
-	{ 0x04, "Drive not ready" },
-	{ 0x06, "No Track 00 signal" },
-	{ 0x10, "ECC error in ID field" },
-	{ 0x11, "Uncorrectable data error" },
-	{ 0x12, "ID field address mark not found" },
-	{ 0x13, "Data field address mark not found" },
-	{ 0x14, "Record not found" },
-	{ 0x15, "Seek error" },
-	{ 0x18, "Data check in no retry mode" },
-	{ 0x19, "ECC error during verify" },
-	{ 0x1a, "Access to bad block" },
-	{ 0x1c, "Unformatted or bad format" },
-	{ 0x20, "Invalid command" },
-	{ 0x21, "Invalid block address" },
-	{ 0x23, "Volume overflow" },
-	{ 0x24, "Invalid argument" },
-	{ 0x25, "Invalid drive number" },
-	{ 0x26, "Byte zero parity check" },
-	{ 0x28, "Cartride changed" },
-	{ 0x2c, "Error count overflow" },
-	{ 0x30, "Controller selftest failed" }
-},
-
-	scsi_acsi_errors[] = {
-	{ 0x00, "No error (??)" },
-	{ 0x01, "Recovered error" },
-	{ 0x02, "Drive not ready" },
-	{ 0x03, "Uncorrectable medium error" },
-	{ 0x04, "Hardware error" },
-	{ 0x05, "Illegal request" },
-	{ 0x06, "Unit attention (Reset or cartridge changed)" },
-	{ 0x07, "Data protection" },
-	{ 0x08, "Blank check" },
-	{ 0x0b, "Aborted Command" },
-	{ 0x0d, "Volume overflow" }
-};
-
-
-
-/***************************** Prototypes *****************************/
-
-static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int
-                        rwflag, int enable);
-static int acsi_reqsense( char *buffer, int targ, int lun);
-static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip);
-static irqreturn_t acsi_interrupt (int irq, void *data);
-static void unexpected_acsi_interrupt( void );
-static void bad_rw_intr( void );
-static void read_intr( void );
-static void write_intr( void);
-static void acsi_times_out( unsigned long dummy );
-static void copy_to_acsibuffer( void );
-static void copy_from_acsibuffer( void );
-static void do_end_requests( void );
-static void do_acsi_request( request_queue_t * );
-static void redo_acsi_request( void );
-static int acsi_ioctl( struct inode *inode, struct file *file, unsigned int
-                       cmd, unsigned long arg );
-static int acsi_open( struct inode * inode, struct file * filp );
-static int acsi_release( struct inode * inode, struct file * file );
-static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag );
-static int acsi_change_blk_size( int target, int lun);
-static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd );
-static int acsi_revalidate (struct gendisk *disk);
-
-/************************* End of Prototypes **************************/
-
-
-DEFINE_TIMER(acsi_timer, acsi_times_out, 0, 0);
-
-
-#ifdef CONFIG_ATARI_SLM
-
-extern int attach_slm( int target, int lun );
-extern int slm_init( void );
-
-#endif
-
-
-
-/***********************************************************************
- *
- *   ACSI primitives
- *
- **********************************************************************/
-
-
-/*
- * The following two functions wait for _IRQ to become Low or High,
- * resp., with a timeout. The 'timeout' parameter is in jiffies
- * (10ms).
- * If the functions are called with timer interrupts on (int level <
- * 6), the timeout is based on the 'jiffies' variable to provide exact
- * timeouts for device probing etc.
- * If interrupts are disabled, the number of tries is based on the
- * 'loops_per_jiffy' variable. A rough estimation is sufficient here...
- */
-
-#define INT_LEVEL													\
-	({	unsigned __sr;												\
-		__asm__ __volatile__ ( "movew	%/sr,%0" : "=dm" (__sr) );	\
-		(__sr >> 8) & 7;											\
-	})
-
-int acsi_wait_for_IRQ( unsigned timeout )
-
-{
-	if (INT_LEVEL < 6) {
-		unsigned long maxjif = jiffies + timeout;
-		while (time_before(jiffies, maxjif))
-			if (!(mfp.par_dt_reg & 0x20)) return( 1 );
-	}
-	else {
-		long tries = loops_per_jiffy / 8 * timeout;
-		while( --tries >= 0 )
-			if (!(mfp.par_dt_reg & 0x20)) return( 1 );
-	}		
-	return( 0 ); /* timeout! */
-}
-
-
-int acsi_wait_for_noIRQ( unsigned timeout )
-
-{
-	if (INT_LEVEL < 6) {
-		unsigned long maxjif = jiffies + timeout;
-		while (time_before(jiffies, maxjif))
-			if (mfp.par_dt_reg & 0x20) return( 1 );
-	}
-	else {
-		long tries = loops_per_jiffy * timeout / 8;
-		while( tries-- >= 0 )
-			if (mfp.par_dt_reg & 0x20) return( 1 );
-	}		
-	return( 0 ); /* timeout! */
-}
-
-static struct timeval start_time;
-
-void
-acsi_delay_start(void)
-{
-	do_gettimeofday(&start_time);
-}
-
-/* wait from acsi_delay_start to now usec (<1E6) usec */
-
-void
-acsi_delay_end(long usec)
-{
-	struct timeval end_time;
-	long deltau,deltas;
-	do_gettimeofday(&end_time);
-	deltau=end_time.tv_usec - start_time.tv_usec;
-	deltas=end_time.tv_sec - start_time.tv_sec;
-	if (deltas > 1 || deltas < 0)
-		return;
-	if (deltas > 0)
-		deltau += 1000*1000;
-	if (deltau >= usec)
-		return;
-	udelay(usec-deltau);
-}
-
-/* acsicmd_dma() sends an ACSI command and sets up the DMA to transfer
- * 'blocks' blocks of 512 bytes from/to 'buffer'.
- * Because the _IRQ signal is used for handshaking the command bytes,
- * the ACSI interrupt has to be disabled in this function. If the end
- * of the operation should be signalled by a real interrupt, it has to be
- * reenabled afterwards.
- */
-
-static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int rwflag, int enable)
-
-{	unsigned long	flags, paddr;
-	int				i;
-
-#ifdef NO_WRITE
-	if (rwflag || *cmd == 0x0a) {
-		printk( "ACSI: Write commands disabled!\n" );
-		return( 0 );
-	}
-#endif
-	
-	rwflag = rwflag ? 0x100 : 0;
-	paddr = virt_to_phys( buffer );
-
-	acsi_delay_end(COMMAND_DELAY);
-	DISABLE_IRQ();
-
-	local_irq_save(flags);
-	/* Low on A1 */
-	dma_wd.dma_mode_status = 0x88 | rwflag;
-	MFPDELAY();
-
-	/* set DMA address */
-	dma_wd.dma_lo = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	dma_wd.dma_md = (unsigned char)paddr;
-	paddr >>= 8;
-	MFPDELAY();
-	if (ATARIHW_PRESENT(EXTD_DMA))
-		st_dma_ext_dmahi = (unsigned short)paddr;
-	else
-		dma_wd.dma_hi = (unsigned char)paddr;
-	MFPDELAY();
-	local_irq_restore(flags);
-
-	/* send the command bytes except the last */
-	for( i = 0; i < 5; ++i ) {
-		DMA_LONG_WRITE( *cmd++, 0x8a | rwflag );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-	}
-
-	/* Clear FIFO and switch DMA to correct direction */  
-	dma_wd.dma_mode_status = 0x92 | (rwflag ^ 0x100);  
-	MFPDELAY();
-	dma_wd.dma_mode_status = 0x92 | rwflag;
-	MFPDELAY();
-
-	/* How many sectors for DMA */
-	dma_wd.fdc_acces_seccount = blocks;
-	MFPDELAY();
-	
-	/* send last command byte */
-	dma_wd.dma_mode_status = 0x8a | rwflag;
-	MFPDELAY();
-	DMA_LONG_WRITE( *cmd++, 0x0a | rwflag );
-	if (enable)
-		ENABLE_IRQ();
-	udelay(80);
-
-	return( 1 );
-}
-
-
-/*
- * acsicmd_nodma() sends an ACSI command that requires no DMA.
- */
-
-int acsicmd_nodma( const char *cmd, int enable)
-
-{	int	i;
-
-	acsi_delay_end(COMMAND_DELAY);
-	DISABLE_IRQ();
-
-	/* send first command byte */
-	dma_wd.dma_mode_status = 0x88;
-	MFPDELAY();
-	DMA_LONG_WRITE( *cmd++, 0x8a );
-	udelay(20);
-	if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-
-	/* send the intermediate command bytes */
-	for( i = 0; i < 4; ++i ) {
-		DMA_LONG_WRITE( *cmd++, 0x8a );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-	}
-
-	/* send last command byte */
-	DMA_LONG_WRITE( *cmd++, 0x0a );
-	if (enable)
-		ENABLE_IRQ();
-	udelay(80);
-	
-	return( 1 );
-	/* Note that the ACSI interrupt is still disabled after this
-	 * function. If you want to get the IRQ delivered, enable it manually!
-	 */
-}
-
-
-static int acsi_reqsense( char *buffer, int targ, int lun)
-
-{
-	CMDSET_TARG_LUN( reqsense_cmd, targ, lun);
-	if (!acsicmd_dma( reqsense_cmd, buffer, 1, 0, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 );
-	if (!acsi_wait_for_IRQ( 10 )) return( 0 );
-	acsi_getstatus();
-	dma_cache_maintenance( virt_to_phys(buffer), 16, 0 );
-	
-	return( 1 );
-}	
-
-
-/*
- * ACSI status phase: get the status byte from the bus
- *
- * I've seen several times that a 0xff status is read, propably due to
- * a timing error. In this case, the procedure is repeated after the
- * next _IRQ edge.
- */
-
-int acsi_getstatus( void )
-
-{	int	status;
-
-	DISABLE_IRQ();
-	for(;;) {
-		if (!acsi_wait_for_IRQ( 100 )) {
-			acsi_delay_start();
-			return( -1 );
-		}
-		dma_wd.dma_mode_status = 0x8a;
-		MFPDELAY();
-		status = dma_wd.fdc_acces_seccount;
-		if (status != 0xff) break;
-#ifdef DEBUG
-		printk("ACSI: skipping 0xff status byte\n" );
-#endif
-		udelay(40);
-		acsi_wait_for_noIRQ( 20 );
-	}
-	dma_wd.dma_mode_status = 0x80;
-	udelay(40);
-	acsi_wait_for_noIRQ( 20 );
-
-	acsi_delay_start();
-	return( status & 0x1f ); /* mask of the device# */
-}
-
-
-#if (defined(CONFIG_ATARI_SLM) || defined(CONFIG_ATARI_SLM_MODULE))
-
-/* Receive data in an extended status phase. Needed by SLM printer. */
-
-int acsi_extstatus( char *buffer, int cnt )
-
-{	int	status;
-
-	DISABLE_IRQ();
-	udelay(80);
-	while( cnt-- > 0 ) {
-		if (!acsi_wait_for_IRQ( 40 )) return( 0 );
-		dma_wd.dma_mode_status = 0x8a;
-		MFPDELAY();
-		status = dma_wd.fdc_acces_seccount;
-		MFPDELAY();
-		*buffer++ = status & 0xff;
-		udelay(40);
-	}
-	return( 1 );
-}
-
-
-/* Finish an extended status phase */
-
-void acsi_end_extstatus( void )
-
-{
-	dma_wd.dma_mode_status = 0x80;
-	udelay(40);
-	acsi_wait_for_noIRQ( 20 );
-	acsi_delay_start();
-}
-
-
-/* Send data in an extended command phase */
-
-int acsi_extcmd( unsigned char *buffer, int cnt )
-
-{
-	while( cnt-- > 0 ) {
-		DMA_LONG_WRITE( *buffer++, 0x8a );
-		udelay(20);
-		if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */
-	}
-	return( 1 );
-}
-
-#endif
-
-
-static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip)
-
-{	int atari_err, i, errcode;
-	struct acsi_error *arr;
-
-	atari_err = aip->old_atari_disk;
-	if (atari_err)
-		errcode = errblk[0] & 0x7f;
-	else
-		if ((errblk[0] & 0x70) == 0x70)
-			errcode = errblk[2] & 0x0f;
-		else
-			errcode = errblk[0] & 0x0f;
-	
-	printk( KERN_ERR "ACSI error 0x%02x", errcode );
-
-	if (errblk[0] & 0x80)
-		printk( " for sector %d",
-				((errblk[1] & 0x1f) << 16) |
-				(errblk[2] << 8) | errblk[0] );
-
-	arr = atari_err ? atari_acsi_errors : scsi_acsi_errors;
-	i = atari_err ? sizeof(atari_acsi_errors)/sizeof(*atari_acsi_errors) :
-		            sizeof(scsi_acsi_errors)/sizeof(*scsi_acsi_errors);
-	
-	for( --i; i >= 0; --i )
-		if (arr[i].code == errcode) break;
-	if (i >= 0)
-		printk( ": %s\n", arr[i].text );
-}
-
-/*******************************************************************
- *
- * ACSI interrupt routine
- *   Test, if this is a ACSI interrupt and call the irq handler
- *   Otherwise ignore this interrupt.
- *
- *******************************************************************/
-
-static irqreturn_t acsi_interrupt(int irq, void *data )
-
-{	void (*acsi_irq_handler)(void) = do_acsi;
-
-	do_acsi = NULL;
-	CLEAR_TIMER();
-
-	if (!acsi_irq_handler)
-		acsi_irq_handler = unexpected_acsi_interrupt;
-	acsi_irq_handler();
-	return IRQ_HANDLED;
-}
-
-
-/******************************************************************
- *
- * The Interrupt handlers
- *
- *******************************************************************/
-
-
-static void unexpected_acsi_interrupt( void )
-
-{
-	printk( KERN_WARNING "Unexpected ACSI interrupt\n" );
-}
-
-
-/* This function is called in case of errors. Because we cannot reset
- * the ACSI bus or a single device, there is no other choice than
- * retrying several times :-(
- */
-
-static void bad_rw_intr( void )
-
-{
-	if (!CURRENT)
-		return;
-
-	if (++CURRENT->errors >= MAX_ERRORS)
-		end_request(CURRENT, 0);
-	/* Otherwise just retry */
-}
-
-
-static void read_intr( void )
-
-{	int		status;
-	
-	status = acsi_getstatus();
-	if (status != 0) {
-		struct gendisk *disk = CURRENT->rq_disk;
-		struct acsi_info_struct *aip = disk->private_data;
-		printk(KERN_ERR "%s: ", disk->disk_name);
-		if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun))
-			printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status );
-		else {
-			acsi_print_error(acsi_buffer, aip);
-			if (CARTRCH_STAT(aip, acsi_buffer))
-				aip->changed = 1;
-		}
-		ENABLE_IRQ();
-		bad_rw_intr();
-		redo_acsi_request();
-		return;
-	}
-
-	dma_cache_maintenance( virt_to_phys(CurrentBuffer), CurrentNSect*512, 0 );
-	if (CurrentBuffer == acsi_buffer)
-		copy_from_acsibuffer();
-
-	do_end_requests();
-	redo_acsi_request();
-}
-
-
-static void write_intr(void)
-
-{	int	status;
-
-	status = acsi_getstatus();
-	if (status != 0) {
-		struct gendisk *disk = CURRENT->rq_disk;
-		struct acsi_info_struct *aip = disk->private_data;
-		printk( KERN_ERR "%s: ", disk->disk_name);
-		if (!acsi_reqsense( acsi_buffer, aip->target, aip->lun))
-			printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status );
-		else {
-			acsi_print_error(acsi_buffer, aip);
-			if (CARTRCH_STAT(aip, acsi_buffer))
-				aip->changed = 1;
-		}
-		bad_rw_intr();
-		redo_acsi_request();
-		return;
-	}
-
-	do_end_requests();
-	redo_acsi_request();
-}
-
-
-static void acsi_times_out( unsigned long dummy )
-
-{
-	DISABLE_IRQ();
-	if (!do_acsi) return;
-
-	do_acsi = NULL;
-	printk( KERN_ERR "ACSI timeout\n" );
-	if (!CURRENT)
-	    return;
-	if (++CURRENT->errors >= MAX_ERRORS) {
-#ifdef DEBUG
-		printk( KERN_ERR "ACSI: too many errors.\n" );
-#endif
-		end_request(CURRENT, 0);
-	}
-
-	redo_acsi_request();
-}
-
-
-
-/***********************************************************************
- *
- *  Scatter-gather utility functions
- *
- ***********************************************************************/
-
-
-static void copy_to_acsibuffer( void )
-
-{	int					i;
-	char				*src, *dst;
-	struct buffer_head	*bh;
-	
-	src = CURRENT->buffer;
-	dst = acsi_buffer;
-	bh = CURRENT->bh;
-
-	if (!bh)
-		memcpy( dst, src, CurrentNSect*512 );
-	else
-		for( i = 0; i < CurrentNReq; ++i ) {
-			memcpy( dst, src, bh->b_size );
-			dst += bh->b_size;
-			if ((bh = bh->b_reqnext))
-				src = bh->b_data;
-		}
-}
-
-
-static void copy_from_acsibuffer( void )
-
-{	int					i;
-	char				*src, *dst;
-	struct buffer_head	*bh;
-	
-	dst = CURRENT->buffer;
-	src = acsi_buffer;
-	bh = CURRENT->bh;
-
-	if (!bh)
-		memcpy( dst, src, CurrentNSect*512 );
-	else
-		for( i = 0; i < CurrentNReq; ++i ) {
-			memcpy( dst, src, bh->b_size );
-			src += bh->b_size;
-			if ((bh = bh->b_reqnext))
-				dst = bh->b_data;
-		}
-}
-
-
-static void do_end_requests( void )
-
-{	int		i, n;
-
-	if (!CURRENT->bh) {
-		CURRENT->nr_sectors -= CurrentNSect;
-		CURRENT->current_nr_sectors -= CurrentNSect;
-		CURRENT->sector += CurrentNSect;
-		if (CURRENT->nr_sectors == 0)
-			end_request(CURRENT, 1);
-	}
-	else {
-		for( i = 0; i < CurrentNReq; ++i ) {
-			n = CURRENT->bh->b_size >> 9;
-			CURRENT->nr_sectors -= n;
-			CURRENT->current_nr_sectors -= n;
-			CURRENT->sector += n;
-			end_request(CURRENT, 1);
-		}
-	}
-}
-
-
-
-
-/***********************************************************************
- *
- *  do_acsi_request and friends
- *
- ***********************************************************************/
-
-static void do_acsi_request( request_queue_t * q )
-
-{
-	stdma_lock( acsi_interrupt, NULL );
-	redo_acsi_request();
-}
-
-
-static void redo_acsi_request( void )
-{
-	unsigned			block, target, lun, nsect;
-	char 				*buffer;
-	unsigned long		pbuffer;
-	struct buffer_head	*bh;
-	struct gendisk *disk;
-	struct acsi_info_struct *aip;
-
-  repeat:
-	CLEAR_TIMER();
-
-	if (do_acsi)
-		return;
-
-	if (!CURRENT) {
-		do_acsi = NULL;
-		ENABLE_IRQ();
-		stdma_release();
-		return;
-	}
-
-	disk = CURRENT->rq_disk;
-	aip = disk->private_data;
-	if (CURRENT->bh) {
-		if (!CURRENT->bh && !buffer_locked(CURRENT->bh))
-			panic("ACSI: block not locked");
-	}
-
-	block = CURRENT->sector;
-	if (block+CURRENT->nr_sectors >= get_capacity(disk)) {
-#ifdef DEBUG
-		printk( "%s: attempted access for blocks %d...%ld past end of device at block %ld.\n",
-		       disk->disk_name,
-		       block, block + CURRENT->nr_sectors - 1,
-		       get_capacity(disk));
-#endif
-		end_request(CURRENT, 0);
-		goto repeat;
-	}
-	if (aip->changed) {
-		printk( KERN_NOTICE "%s: request denied because cartridge has "
-				"been changed.\n", disk->disk_name);
-		end_request(CURRENT, 0);
-		goto repeat;
-	}
-	
-	target = aip->target;
-	lun    = aip->lun;
-
-	/* Find out how many sectors should be transferred from/to
-	 * consecutive buffers and thus can be done with a single command.
-	 */
-	buffer      = CURRENT->buffer;
-	pbuffer     = virt_to_phys(buffer);
-	nsect       = CURRENT->current_nr_sectors;
-	CurrentNReq = 1;
-
-	if ((bh = CURRENT->bh) && bh != CURRENT->bhtail) {
-		if (!STRAM_ADDR(pbuffer)) {
-			/* If transfer is done via the ACSI buffer anyway, we can
-			 * assemble as much bh's as fit in the buffer.
-			 */
-			while( (bh = bh->b_reqnext) ) {
-				if (nsect + (bh->b_size>>9) > ACSI_BUFFER_SECTORS) break;
-				nsect += bh->b_size >> 9;
-				++CurrentNReq;
-				if (bh == CURRENT->bhtail) break;
-			}
-			buffer = acsi_buffer;
-			pbuffer = phys_acsi_buffer;
-		}
-		else {
-			unsigned long pendadr, pnewadr;
-			pendadr = pbuffer + nsect*512;
-			while( (bh = bh->b_reqnext) ) {
-				pnewadr = virt_to_phys(bh->b_data);
-				if (!STRAM_ADDR(pnewadr) || pendadr != pnewadr) break;
-				nsect += bh->b_size >> 9;
-				pendadr = pnewadr + bh->b_size;
-				++CurrentNReq;
-				if (bh == CURRENT->bhtail) break;
-			}
-		}
-	}
-	else {
-		if (!STRAM_ADDR(pbuffer)) {
-			buffer = acsi_buffer;
-			pbuffer = phys_acsi_buffer;
-			if (nsect > ACSI_BUFFER_SECTORS)
-				nsect = ACSI_BUFFER_SECTORS;
-		}
-	}
-	CurrentBuffer = buffer;
-	CurrentNSect  = nsect;
-
-	if (rq_data_dir(CURRENT) == WRITE) {
-		CMDSET_TARG_LUN( write_cmd, target, lun );
-		CMDSET_BLOCK( write_cmd, block );
-		CMDSET_LEN( write_cmd, nsect );
-		if (buffer == acsi_buffer)
-			copy_to_acsibuffer();
-		dma_cache_maintenance( pbuffer, nsect*512, 1 );
-		do_acsi = write_intr;
-		if (!acsicmd_dma( write_cmd, buffer, nsect, 1, 1)) {
-			do_acsi = NULL;
-			printk( KERN_ERR "ACSI (write): Timeout in command block\n" );
-			bad_rw_intr();
-			goto repeat;
-		}
-		SET_TIMER();
-		return;
-	}
-	if (rq_data_dir(CURRENT) == READ) {
-		CMDSET_TARG_LUN( read_cmd, target, lun );
-		CMDSET_BLOCK( read_cmd, block );
-		CMDSET_LEN( read_cmd, nsect );
-		do_acsi = read_intr;
-		if (!acsicmd_dma( read_cmd, buffer, nsect, 0, 1)) {
-			do_acsi = NULL;
-			printk( KERN_ERR "ACSI (read): Timeout in command block\n" );
-			bad_rw_intr();
-			goto repeat;
-		}
-		SET_TIMER();
-		return;
-	}
-	panic("unknown ACSI command");
-}
-
-
-
-/***********************************************************************
- *
- *  Misc functions: ioctl, open, release, check_change, ...
- *
- ***********************************************************************/
-
-static int acsi_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
-	struct acsi_info_struct *aip = bdev->bd_disk->private_data;
-
-	/*
-	 * Just fake some geometry here, it's nonsense anyway
-	 * To make it easy, use Adaptec's usual 64/32 mapping
-	 */
-	geo->heads = 64;
-	geo->sectors = 32;
-	geo->cylinders = aip->size >> 11;
-	return 0;
-}
-
-static int acsi_ioctl( struct inode *inode, struct file *file,
-					   unsigned int cmd, unsigned long arg )
-{
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct acsi_info_struct *aip = disk->private_data;
-	switch (cmd) {
-	  case SCSI_IOCTL_GET_IDLUN:
-		/* SCSI compatible GET_IDLUN call to get target's ID and LUN number */
-		put_user( aip->target | (aip->lun << 8),
-				  &((Scsi_Idlun *) arg)->dev_id );
-		put_user( 0, &((Scsi_Idlun *) arg)->host_unique_id );
-		return 0;
-	  default:
-		return -EINVAL;
-	}
-}
-
-
-/*
- * Open a device, check for read-only and lock the medium if it is
- * removable.
- *
- * Changes by Martin Rogge, 9th Aug 1995:
- * Check whether check_disk_change (and therefore revalidate_acsidisk)
- * was successful. They fail when there is no medium in the drive.
- *
- * The problem of media being changed during an operation can be 
- * ignored because of the prevent_removal code.
- *
- * Added check for the validity of the device number.
- *
- */
-
-static int acsi_open( struct inode * inode, struct file * filp )
-{
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct acsi_info_struct *aip = disk->private_data;
-
-	if (aip->access_count == 0 && aip->removable) {
-#if 0
-		aip->changed = 1;	/* safety first */
-#endif
-		check_disk_change( inode->i_bdev );
-		if (aip->changed)	/* revalidate was not successful (no medium) */
-			return -ENXIO;
-		acsi_prevent_removal(aip, 1);
-	}
-	aip->access_count++;
-
-	if (filp && filp->f_mode) {
-		check_disk_change( inode->i_bdev );
-		if (filp->f_mode & 2) {
-			if (aip->read_only) {
-				acsi_release( inode, filp );
-				return -EROFS;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Releasing a block device means we sync() it, so that it can safely
- * be forgotten about...
- */
-
-static int acsi_release( struct inode * inode, struct file * file )
-{
-	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct acsi_info_struct *aip = disk->private_data;
-	if (--aip->access_count == 0 && aip->removable)
-		acsi_prevent_removal(aip, 0);
-	return( 0 );
-}
-
-/*
- * Prevent or allow a media change for removable devices.
- */
-
-static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag)
-{
-	stdma_lock( NULL, NULL );
-	
-	CMDSET_TARG_LUN(pa_med_rem_cmd, aip->target, aip->lun);
-	CMDSET_LEN( pa_med_rem_cmd, flag );
-	
-	if (acsicmd_nodma(pa_med_rem_cmd, 0) && acsi_wait_for_IRQ(3*HZ))
-		acsi_getstatus();
-	/* Do not report errors -- some devices may not know this command. */
-
-	ENABLE_IRQ();
-	stdma_release();
-}
-
-static int acsi_media_change(struct gendisk *disk)
-{
-	struct acsi_info_struct *aip = disk->private_data;
-
-	if (!aip->removable) 
-		return 0;
-
-	if (aip->changed)
-		/* We can be sure that the medium has been changed -- REQUEST
-		 * SENSE has reported this earlier.
-		 */
-		return 1;
-
-	/* If the flag isn't set, make a test by reading block 0.
-	 * If errors happen, it seems to be better to say "changed"...
-	 */
-	stdma_lock( NULL, NULL );
-	CMDSET_TARG_LUN(read_cmd, aip->target, aip->lun);
-	CMDSET_BLOCK( read_cmd, 0 );
-	CMDSET_LEN( read_cmd, 1 );
-	if (acsicmd_dma(read_cmd, acsi_buffer, 1, 0, 0) &&
-	    acsi_wait_for_IRQ(3*HZ)) {
-		if (acsi_getstatus()) {
-			if (acsi_reqsense(acsi_buffer, aip->target, aip->lun)) {
-				if (CARTRCH_STAT(aip, acsi_buffer))
-					aip->changed = 1;
-			}
-			else {
-				printk( KERN_ERR "%s: REQUEST SENSE failed in test for "
-				       "medium change; assuming a change\n", disk->disk_name );
-				aip->changed = 1;
-			}
-		}
-	}
-	else {
-		printk( KERN_ERR "%s: Test for medium changed timed out; "
-				"assuming a change\n", disk->disk_name);
-		aip->changed = 1;
-	}
-	ENABLE_IRQ();
-	stdma_release();
-
-	/* Now, after reading a block, the changed status is surely valid. */
-	return aip->changed;
-}
-
-
-static int acsi_change_blk_size( int target, int lun)
-
-{	int i;
-
-	for (i=0; i<12; i++)
-		acsi_buffer[i] = 0;
-
-	acsi_buffer[3] = 8;
-	acsi_buffer[10] = 2;
-	CMDSET_TARG_LUN( modeselect_cmd, target, lun);
-
-	if (!acsicmd_dma( modeselect_cmd, acsi_buffer, 1,1,0) ||
-		!acsi_wait_for_IRQ( 3*HZ ) ||
-		acsi_getstatus() != 0 ) {
-		return(0);
-	}
-	return(1);
-}
-
-
-static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd )
-
-{
-	int page;
-
-	CMDSET_TARG_LUN( modesense_cmd, target, lun );
-	for (page=0; page<4; page++) {
-		modesense_cmd[2] = page;
-		if (!acsicmd_dma( modesense_cmd, acsi_buffer, 1, 0, 0 ) ||
-		    !acsi_wait_for_IRQ( 3*HZ ) ||
-		    acsi_getstatus())
-			continue;
-
-		/* read twice to jump over the second 16-byte border! */
-		udelay(300);
-		if (acsi_wait_for_noIRQ( 20 ) &&
-		    acsicmd_nodma( modesense_cmd, 0 ) &&
-		    acsi_wait_for_IRQ( 3*HZ ) &&
-		    acsi_getstatus() == 0)
-			break;
-	}
-	if (page == 4) {
-		return(0);
-	}
-
-	dma_cache_maintenance( phys_acsi_buffer, sizeof(SENSE_DATA), 0 );
-	*sd = *(SENSE_DATA *)acsi_buffer;
-
-	/* Validity check, depending on type of data */
-	
-	switch( SENSE_TYPE(*sd) ) {
-
-	  case SENSE_TYPE_ATARI:
-		if (CAPACITY(*sd) == 0)
-			goto invalid_sense;
-		break;
-
-	  case SENSE_TYPE_SCSI:
-		if (sd->scsi.descriptor_size != 8)
-			goto invalid_sense;
-		break;
-
-	  case SENSE_TYPE_UNKNOWN:
-
-		printk( KERN_ERR "ACSI target %d, lun %d: Cannot interpret "
-				"sense data\n", target, lun ); 
-		
-	  invalid_sense:
-
-#ifdef DEBUG
-		{	int i;
-		printk( "Mode sense data for ACSI target %d, lun %d seem not valid:",
-				target, lun );
-		for( i = 0; i < sizeof(SENSE_DATA); ++i )
-			printk( "%02x ", (unsigned char)acsi_buffer[i] );
-		printk( "\n" );
-		}
-#endif
-		return( 0 );
-	}
-		
-	return( 1 );
-}
-
-
-
-/*******************************************************************
- *
- *  Initialization
- *
- ********************************************************************/
-
-
-extern struct block_device_operations acsi_fops;
-
-static struct gendisk *acsi_gendisk[MAX_DEV];
-
-#define MAX_SCSI_DEVICE_CODE 10
-
-static const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] =
-{
- "Direct-Access    ",
- "Sequential-Access",
- "Printer          ",
- "Processor        ",
- "WORM             ",
- "CD-ROM           ",
- "Scanner          ",
- "Optical Device   ",
- "Medium Changer   ",
- "Communications   "
-};
-
-static void print_inquiry(unsigned char *data)
-{
-	int i;
-
-	printk(KERN_INFO "  Vendor: ");
-	for (i = 8; i < 16; i++)
-		{
-	        if (data[i] >= 0x20 && i < data[4] + 5)
-			printk("%c", data[i]);
-		else
-			printk(" ");
-		}
-
-	printk("  Model: ");
-	for (i = 16; i < 32; i++)
-		{
-	        if (data[i] >= 0x20 && i < data[4] + 5)
-			printk("%c", data[i]);
-		else
-			printk(" ");
-		}
-
-	printk("  Rev: ");
-	for (i = 32; i < 36; i++)
-		{
-	        if (data[i] >= 0x20 && i < data[4] + 5)
-			printk("%c", data[i]);
-		else
-			printk(" ");
-		}
-
-	printk("\n");
-
-	i = data[0] & 0x1f;
-
-	printk(KERN_INFO "  Type:   %s ", (i < MAX_SCSI_DEVICE_CODE
-									   ? scsi_device_types[i]
-									   : "Unknown          "));
-	printk("                 ANSI SCSI revision: %02x", data[2] & 0x07);
-	if ((data[2] & 0x07) == 1 && (data[3] & 0x0f) == 1)
-	  printk(" CCS\n");
-	else
-	  printk("\n");
-}
-
-
-/* 
- * Changes by Martin Rogge, 9th Aug 1995: 
- * acsi_devinit has been taken out of acsi_geninit, because it needs 
- * to be called from revalidate_acsidisk. The result of request sense 
- * is now checked for DRIVE NOT READY.
- *
- * The structure *aip is only valid when acsi_devinit returns 
- * DEV_SUPPORTED. 
- *
- */
-	
-#define DEV_NONE	0
-#define DEV_UNKNOWN	1
-#define DEV_SUPPORTED	2
-#define DEV_SLM		3
-
-static int acsi_devinit(struct acsi_info_struct *aip)
-{
-	int status, got_inquiry;
-	SENSE_DATA sense;
-	unsigned char reqsense, extsense;
-
-	/*****************************************************************/
-	/* Do a TEST UNIT READY command to test the presence of a device */
-	/*****************************************************************/
-
-	CMDSET_TARG_LUN(tur_cmd, aip->target, aip->lun);
-	if (!acsicmd_nodma(tur_cmd, 0)) {
-		/* timed out -> no device here */
-#ifdef DEBUG_DETECT
-		printk("target %d lun %d: timeout\n", aip->target, aip->lun);
-#endif
-		return DEV_NONE;
-	}
-		
-	/*************************/
-	/* Read the ACSI status. */
-	/*************************/
-
-	status = acsi_getstatus();
-	if (status) {
-		if (status == 0x12) {
-			/* The SLM printer should be the only device that
-			 * responds with the error code in the status byte. In
-			 * correct status bytes, bit 4 is never set.
-			 */
-			printk( KERN_INFO "Detected SLM printer at id %d lun %d\n",
-			       aip->target, aip->lun);
-			return DEV_SLM;
-		}
-		/* ignore CHECK CONDITION, since some devices send a
-		   UNIT ATTENTION */
-		if ((status & 0x1e) != 0x2) {
-#ifdef DEBUG_DETECT
-			printk("target %d lun %d: status %d\n",
-			       aip->target, aip->lun, status);
-#endif
-			return DEV_UNKNOWN;
-		}
-	}
-
-	/*******************************/
-	/* Do a REQUEST SENSE command. */
-	/*******************************/
-
-	if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun)) {
-		printk( KERN_WARNING "acsi_reqsense failed\n");
-		acsi_buffer[0] = 0;
-		acsi_buffer[2] = UNIT_ATTENTION;
-	}
-	reqsense = acsi_buffer[0];
-	extsense = acsi_buffer[2] & 0xf;
-	if (status) {
-		if ((reqsense & 0x70) == 0x70) {	/* extended sense */
-			if (extsense != UNIT_ATTENTION &&
-			    extsense != NOT_READY) {
-#ifdef DEBUG_DETECT
-				printk("target %d lun %d: extended sense %d\n",
-				       aip->target, aip->lun, extsense);
-#endif
-				return DEV_UNKNOWN;
-			}
-		}
-		else {
-			if (reqsense & 0x7f) {
-#ifdef DEBUG_DETECT
-				printk("target %d lun %d: sense %d\n",
-				       aip->target, aip->lun, reqsense);
-#endif
-				return DEV_UNKNOWN;
-			}
-		}
-	}
-	else 
-		if (reqsense == 0x4) {	/* SH204 Bug workaround */
-#ifdef DEBUG_DETECT
-			printk("target %d lun %d status=0 sense=4\n",
-			       aip->target, aip->lun);
-#endif
-			return DEV_UNKNOWN;
-		}
-
-	/***********************************************************/
-	/* Do an INQUIRY command to get more infos on this device. */
-	/***********************************************************/
-
-	/* Assume default values */
-	aip->removable = 1;
-	aip->read_only = 0;
-	aip->old_atari_disk = 0;
-	aip->changed = (extsense == NOT_READY);	/* medium inserted? */
-	aip->size = DEFAULT_SIZE;
-	got_inquiry = 0;
-	/* Fake inquiry result for old atari disks */
-	memcpy(acsi_buffer, "\000\000\001\000    Adaptec 40xx"
-	       "                    ", 40);
-	CMDSET_TARG_LUN(inquiry_cmd, aip->target, aip->lun);
-	if (acsicmd_dma(inquiry_cmd, acsi_buffer, 1, 0, 0) &&
-	    acsi_getstatus() == 0) {
-		acsicmd_nodma(inquiry_cmd, 0);
-		acsi_getstatus();
-		dma_cache_maintenance( phys_acsi_buffer, 256, 0 );
-		got_inquiry = 1;
-		aip->removable = !!(acsi_buffer[1] & 0x80);
-	}
-	if (aip->type == NONE)	/* only at boot time */
-		print_inquiry(acsi_buffer);
-	switch(acsi_buffer[0]) {
-	  case TYPE_DISK:
-		aip->type = HARDDISK;
-		break;
-	  case TYPE_ROM:
-		aip->type = CDROM;
-		aip->read_only = 1;
-		break;
-	  default:
-		return DEV_UNKNOWN;
-	}
-	/****************************/
-	/* Do a MODE SENSE command. */
-	/****************************/
-
-	if (!acsi_mode_sense(aip->target, aip->lun, &sense)) {
-		printk( KERN_WARNING "No mode sense data.\n" );
-		return DEV_UNKNOWN;
-	}
-	if ((SECTOR_SIZE(sense) != 512) &&
-	    ((aip->type != CDROM) ||
-	     !acsi_change_blk_size(aip->target, aip->lun) ||
-	     !acsi_mode_sense(aip->target, aip->lun, &sense) ||
-	     (SECTOR_SIZE(sense) != 512))) {
-		printk( KERN_WARNING "Sector size != 512 not supported.\n" );
-		return DEV_UNKNOWN;
-	}
-	/* There are disks out there that claim to have 0 sectors... */
-	if (CAPACITY(sense))
-		aip->size = CAPACITY(sense);	/* else keep DEFAULT_SIZE */
-	if (!got_inquiry && SENSE_TYPE(sense) == SENSE_TYPE_ATARI) {
-		/* If INQUIRY failed and the sense data suggest an old
-		 * Atari disk (SH20x, Megafile), the disk is not removable
-		 */
-		aip->removable = 0;
-		aip->old_atari_disk = 1;
-	}
-	
-	/******************/
-	/* We've done it. */
-	/******************/
-	
-	return DEV_SUPPORTED;
-}
-
-EXPORT_SYMBOL(acsi_delay_start);
-EXPORT_SYMBOL(acsi_delay_end);
-EXPORT_SYMBOL(acsi_wait_for_IRQ);
-EXPORT_SYMBOL(acsi_wait_for_noIRQ);
-EXPORT_SYMBOL(acsicmd_nodma);
-EXPORT_SYMBOL(acsi_getstatus);
-EXPORT_SYMBOL(acsi_buffer);
-EXPORT_SYMBOL(phys_acsi_buffer);
-
-#ifdef CONFIG_ATARI_SLM_MODULE
-void acsi_attach_SLMs( int (*attach_func)( int, int ) );
-
-EXPORT_SYMBOL(acsi_extstatus);
-EXPORT_SYMBOL(acsi_end_extstatus);
-EXPORT_SYMBOL(acsi_extcmd);
-EXPORT_SYMBOL(acsi_attach_SLMs);
-
-/* to remember IDs of SLM devices, SLM module is loaded later
- * (index is target#, contents is lun#, -1 means "no SLM") */
-int SLM_devices[8];
-#endif
-
-static struct block_device_operations acsi_fops = {
-	.owner		= THIS_MODULE,
-	.open		= acsi_open,
-	.release	= acsi_release,
-	.ioctl		= acsi_ioctl,
-	.getgeo		= acsi_getgeo,
-	.media_changed	= acsi_media_change,
-	.revalidate_disk= acsi_revalidate,
-};
-
-#ifdef CONFIG_ATARI_SLM_MODULE
-/* call attach_slm() for each device that is a printer; needed for init of SLM
- * driver as a module, since it's not yet present if acsi.c is inited and thus
- * the bus gets scanned. */
-void acsi_attach_SLMs( int (*attach_func)( int, int ) )
-{
-	int i, n = 0;
-
-	for( i = 0; i < 8; ++i )
-		if (SLM_devices[i] >= 0)
-			n += (*attach_func)( i, SLM_devices[i] );
-	printk( KERN_INFO "Found %d SLM printer(s) total.\n", n );
-}
-#endif /* CONFIG_ATARI_SLM_MODULE */
-
-
-int acsi_init( void )
-{
-	int err = 0;
-	int i, target, lun;
-	struct acsi_info_struct *aip;
-#ifdef CONFIG_ATARI_SLM
-	int n_slm = 0;
-#endif
-	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ACSI))
-		return 0;
-	if (register_blkdev(ACSI_MAJOR, "ad")) {
-		err = -EBUSY;
-		goto out1;
-	}
-	if (!(acsi_buffer =
-		  (char *)atari_stram_alloc(ACSI_BUFFER_SIZE, "acsi"))) {
-		err = -ENOMEM;
-		printk( KERN_ERR "Unable to get ACSI ST-Ram buffer.\n" );
-		goto out2;
-	}
-	phys_acsi_buffer = virt_to_phys( acsi_buffer );
-	STramMask = ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000 : 0xff000000;
-	
-	acsi_queue = blk_init_queue(do_acsi_request, &acsi_lock);
-	if (!acsi_queue) {
-		err = -ENOMEM;
-		goto out2a;
-	}
-#ifdef CONFIG_ATARI_SLM
-	err = slm_init();
-#endif
-	if (err)
-		goto out3;
-
-	printk( KERN_INFO "Probing ACSI devices:\n" );
-	NDevices = 0;
-#ifdef CONFIG_ATARI_SLM_MODULE
-	for( i = 0; i < 8; ++i )
-		SLM_devices[i] = -1;
-#endif
-	stdma_lock(NULL, NULL);
-
-	for (target = 0; target < 8 && NDevices < MAX_DEV; ++target) {
-		lun = 0;
-		do {
-			aip = &acsi_info[NDevices];
-			aip->type = NONE;
-			aip->target = target;
-			aip->lun = lun;
-			i = acsi_devinit(aip);
-			switch (i) {
-			  case DEV_SUPPORTED:
-				printk( KERN_INFO "Detected ");
-				switch (aip->type) {
-				  case HARDDISK:
-					printk("disk");
-					break;
-				  case CDROM:
-					printk("cdrom");
-					break;
-				  default:
-				}
-				printk(" ad%c at id %d lun %d ",
-				       'a' + NDevices, target, lun);
-				if (aip->removable) 
-					printk("(removable) ");
-				if (aip->read_only) 
-					printk("(read-only) ");
-				if (aip->size == DEFAULT_SIZE)
-					printk(" unkown size, using default ");
-				printk("%ld MByte\n",
-				       (aip->size*512+1024*1024/2)/(1024*1024));
-				NDevices++;
-				break;
-			  case DEV_SLM:
-#ifdef CONFIG_ATARI_SLM
-				n_slm += attach_slm( target, lun );
-				break;
-#endif
-#ifdef CONFIG_ATARI_SLM_MODULE
-				SLM_devices[target] = lun;
-				break;
-#endif
-				/* neither of the above: fall through to unknown device */
-			  case DEV_UNKNOWN:
-				printk( KERN_INFO "Detected unsupported device at "
-						"id %d lun %d\n", target, lun);
-				break;
-			}
-		}
-#ifdef CONFIG_ACSI_MULTI_LUN
-		while (i != DEV_NONE && ++lun < MAX_LUN);
-#else
-		while (0);
-#endif
-	}
-
-	/* reenable interrupt */
-	ENABLE_IRQ();
-	stdma_release();
-
-#ifndef CONFIG_ATARI_SLM
-	printk( KERN_INFO "Found %d ACSI device(s) total.\n", NDevices );
-#else
-	printk( KERN_INFO "Found %d ACSI device(s) and %d SLM printer(s) total.\n",
-			NDevices, n_slm );
-#endif
-	err = -ENOMEM;
-	for( i = 0; i < NDevices; ++i ) {
-		acsi_gendisk[i] = alloc_disk(16);
-		if (!acsi_gendisk[i])
-			goto out4;
-	}
-
-	for( i = 0; i < NDevices; ++i ) {
-		struct gendisk *disk = acsi_gendisk[i];
-		sprintf(disk->disk_name, "ad%c", 'a'+i);
-		aip = &acsi_info[NDevices];
-		disk->major = ACSI_MAJOR;
-		disk->first_minor = i << 4;
-		if (acsi_info[i].type != HARDDISK)
-			disk->minors = 1;
-		disk->fops = &acsi_fops;
-		disk->private_data = &acsi_info[i];
-		set_capacity(disk, acsi_info[i].size);
-		disk->queue = acsi_queue;
-		add_disk(disk);
-	}
-	return 0;
-out4:
-	while (i--)
-		put_disk(acsi_gendisk[i]);
-out3:
-	blk_cleanup_queue(acsi_queue);
-out2a:
-	atari_stram_free( acsi_buffer );
-out2:
-	unregister_blkdev( ACSI_MAJOR, "ad" );
-out1:
-	return err;
-}
-
-
-#ifdef MODULE
-
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
-	int err;
-
-	if ((err = acsi_init()))
-		return( err );
-	printk( KERN_INFO "ACSI driver loaded as module.\n");
-	return( 0 );
-}
-
-void cleanup_module(void)
-{
-	int i;
-	del_timer( &acsi_timer );
-	blk_cleanup_queue(acsi_queue);
-	atari_stram_free( acsi_buffer );
-
-	if (unregister_blkdev( ACSI_MAJOR, "ad" ) != 0)
-		printk( KERN_ERR "acsi: cleanup_module failed\n");
-
-	for (i = 0; i < NDevices; i++) {
-		del_gendisk(acsi_gendisk[i]);
-		put_disk(acsi_gendisk[i]);
-	}
-}
-#endif
-
-/*
- * This routine is called to flush all partitions and partition tables
- * for a changed scsi disk, and then re-read the new partition table.
- * If we are revalidating a disk because of a media change, then we
- * enter with usage == 0.  If we are using an ioctl, we automatically have
- * usage == 1 (we need an open channel to use an ioctl :-), so this
- * is our limit.
- *
- * Changes by Martin Rogge, 9th Aug 1995: 
- * got cd-roms to work by calling acsi_devinit. There are only two problems:
- * First, if there is no medium inserted, the status will remain "changed".
- * That is no problem at all, but our design of three-valued logic (medium
- * changed, medium not changed, no medium inserted).
- * Secondly the check could fail completely and the drive could deliver
- * nonsensical data, which could mess up the acsi_info[] structure. In
- * that case we try to make the entry safe.
- *
- */
-
-static int acsi_revalidate(struct gendisk *disk)
-{
-	struct acsi_info_struct *aip = disk->private_data;
-	stdma_lock( NULL, NULL );
-	if (acsi_devinit(aip) != DEV_SUPPORTED) {
-		printk( KERN_ERR "ACSI: revalidate failed for target %d lun %d\n",
-		       aip->target, aip->lun);
-		aip->size = 0;
-		aip->read_only = 1;
-		aip->removable = 1;
-		aip->changed = 1; /* next acsi_open will try again... */
-	}
-
-	ENABLE_IRQ();
-	stdma_release();
-	set_capacity(disk, aip->size);
-	return 0;
-}
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 27a139025ced..6ce8b897e262 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1363,7 +1363,7 @@ static void redo_fd_request(void)
 #ifdef DEBUG
 		printk("fd: sector %ld + %d requested for %s\n",
 		       CURRENT->sector,cnt,
-		       (CURRENT->cmd==READ)?"read":"write");
+		       (rq_data_dir(CURRENT) == READ) ? "read" : "write");
 #endif
 		block = CURRENT->sector + cnt;
 		if ((int)block > floppy->blocks) {
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 5acc6c44aead..0fcad430474e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -87,6 +87,7 @@ static const struct pci_device_id cciss_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3214},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3237},
+	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x323D},
 	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,	PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
 	{0,}
@@ -119,6 +120,7 @@ static struct board_type products[] = {
 	{0x3214103C, "Smart Array E200i", &SA5_access, 120},
 	{0x3215103C, "Smart Array E200i", &SA5_access, 120},
 	{0x3237103C, "Smart Array E500", &SA5_access, 512},
+	{0x323D103C, "Smart Array P700m", &SA5_access, 512},
 	{0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
 };
 
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 0ed5470d2533..4503290da407 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -74,6 +74,7 @@
 #include <linux/highmem.h>
 #include <linux/gfp.h>
 #include <linux/kthread.h>
+#include <linux/splice.h>
 
 #include <asm/uaccess.h>
 
@@ -401,50 +402,73 @@ struct lo_read_data {
 };
 
 static int
-lo_read_actor(read_descriptor_t *desc, struct page *page,
-	      unsigned long offset, unsigned long size)
+lo_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+		struct splice_desc *sd)
 {
-	unsigned long count = desc->count;
-	struct lo_read_data *p = desc->arg.data;
+	struct lo_read_data *p = sd->u.data;
 	struct loop_device *lo = p->lo;
+	struct page *page = buf->page;
 	sector_t IV;
+	size_t size;
+	int ret;
 
-	IV = ((sector_t) page->index << (PAGE_CACHE_SHIFT - 9))+(offset >> 9);
+	ret = buf->ops->confirm(pipe, buf);
+	if (unlikely(ret))
+		return ret;
 
-	if (size > count)
-		size = count;
+	IV = ((sector_t) page->index << (PAGE_CACHE_SHIFT - 9)) +
+							(buf->offset >> 9);
+	size = sd->len;
+	if (size > p->bsize)
+		size = p->bsize;
 
-	if (lo_do_transfer(lo, READ, page, offset, p->page, p->offset, size, IV)) {
-		size = 0;
+	if (lo_do_transfer(lo, READ, page, buf->offset, p->page, p->offset, size, IV)) {
 		printk(KERN_ERR "loop: transfer error block %ld\n",
 		       page->index);
-		desc->error = -EINVAL;
+		size = -EINVAL;
 	}
 
 	flush_dcache_page(p->page);
 
-	desc->count = count - size;
-	desc->written += size;
-	p->offset += size;
+	if (size > 0)
+		p->offset += size;
+
 	return size;
 }
 
 static int
+lo_direct_splice_actor(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+	return __splice_from_pipe(pipe, sd, lo_splice_actor);
+}
+
+static int
 do_lo_receive(struct loop_device *lo,
 	      struct bio_vec *bvec, int bsize, loff_t pos)
 {
 	struct lo_read_data cookie;
+	struct splice_desc sd;
 	struct file *file;
-	int retval;
+	long retval;
 
 	cookie.lo = lo;
 	cookie.page = bvec->bv_page;
 	cookie.offset = bvec->bv_offset;
 	cookie.bsize = bsize;
+
+	sd.len = 0;
+	sd.total_len = bvec->bv_len;
+	sd.flags = 0;
+	sd.pos = pos;
+	sd.u.data = &cookie;
+
 	file = lo->lo_backing_file;
-	retval = file->f_op->sendfile(file, &pos, bvec->bv_len,
-			lo_read_actor, &cookie);
-	return (retval < 0)? retval: 0;
+	retval = splice_direct_to_actor(file, &sd, lo_direct_splice_actor);
+
+	if (retval < 0)
+		return retval;
+
+	return 0;
 }
 
 static int
@@ -679,8 +703,8 @@ static int loop_change_fd(struct loop_device *lo, struct file *lo_file,
 	if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))
 		goto out_putf;
 
-	/* new backing store needs to support loop (eg sendfile) */
-	if (!inode->i_fop->sendfile)
+	/* new backing store needs to support loop (eg splice_read) */
+	if (!inode->i_fop->splice_read)
 		goto out_putf;
 
 	/* size of the new backing store needs to be the same */
@@ -760,7 +784,7 @@ static int loop_set_fd(struct loop_device *lo, struct file *lo_file,
 		 * If we can't read - sorry. If we only can't write - well,
 		 * it's going to be read-only.
 		 */
-		if (!file->f_op->sendfile)
+		if (!file->f_op->splice_read)
 			goto out_putf;
 		if (aops->prepare_write && aops->commit_write)
 			lo_flags |= LO_FLAGS_USE_AOPS;
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 069ae39a9cd9..c575fb1d585f 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -416,7 +416,7 @@ static void nbd_clear_que(struct nbd_device *lo)
 /*
  * We always wait for result of write, for now. It would be nice to make it optional
  * in future
- * if ((req->cmd == WRITE) && (lo->flags & NBD_WRITE_NOCHK)) 
+ * if ((rq_data_dir(req) == WRITE) && (lo->flags & NBD_WRITE_NOCHK))
  *   { printk( "Warning: Ignoring result!\n"); nbd_end_request( req ); }
  */
 
diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index f1b9dd7d47d6..ce64e86d6ffb 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -146,8 +146,7 @@ static void pkt_kobj_release(struct kobject *kobj)
  **********************************************************/
 
 #define DEF_ATTR(_obj,_name,_mode) \
-	static struct attribute _obj = { \
-		.name = _name, .owner = THIS_MODULE, .mode = _mode }
+	static struct attribute _obj = { .name = _name, .mode = _mode }
 
 /**********************************************************
   /sys/class/pktcdvd/pktcdvd[0-7]/
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index 7e04dd69f609..59b054810ed0 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -199,7 +199,6 @@ static void hci_usb_tx_complete(struct urb *urb);
 #define __pending_q(husb, type)   (&husb->pending_q[type-1])
 #define __completed_q(husb, type) (&husb->completed_q[type-1])
 #define __transmit_q(husb, type)  (&husb->transmit_q[type-1])
-#define __reassembly(husb, type)  (husb->reassembly[type-1])
 
 static inline struct _urb *__get_completed(struct hci_usb *husb, int type)
 {
@@ -429,12 +428,6 @@ static void hci_usb_unlink_urbs(struct hci_usb *husb)
 			kfree(urb->transfer_buffer);
 			_urb_free(_urb);
 		}
-
-		/* Release reassembly buffers */
-		if (husb->reassembly[i]) {
-			kfree_skb(husb->reassembly[i]);
-			husb->reassembly[i] = NULL;
-		}
 	}
 }
 
@@ -671,83 +664,6 @@ static int hci_usb_send_frame(struct sk_buff *skb)
 	return 0;
 }
 
-static inline int __recv_frame(struct hci_usb *husb, int type, void *data, int count)
-{
-	BT_DBG("%s type %d data %p count %d", husb->hdev->name, type, data, count);
-
-	husb->hdev->stat.byte_rx += count;
-
-	while (count) {
-		struct sk_buff *skb = __reassembly(husb, type);
-		struct { int expect; } *scb;
-		int len = 0;
-	
-		if (!skb) {
-			/* Start of the frame */
-
-			switch (type) {
-			case HCI_EVENT_PKT:
-				if (count >= HCI_EVENT_HDR_SIZE) {
-					struct hci_event_hdr *h = data;
-					len = HCI_EVENT_HDR_SIZE + h->plen;
-				} else
-					return -EILSEQ;
-				break;
-
-			case HCI_ACLDATA_PKT:
-				if (count >= HCI_ACL_HDR_SIZE) {
-					struct hci_acl_hdr *h = data;
-					len = HCI_ACL_HDR_SIZE + __le16_to_cpu(h->dlen);
-				} else
-					return -EILSEQ;
-				break;
-#ifdef CONFIG_BT_HCIUSB_SCO
-			case HCI_SCODATA_PKT:
-				if (count >= HCI_SCO_HDR_SIZE) {
-					struct hci_sco_hdr *h = data;
-					len = HCI_SCO_HDR_SIZE + h->dlen;
-				} else
-					return -EILSEQ;
-				break;
-#endif
-			}
-			BT_DBG("new packet len %d", len);
-
-			skb = bt_skb_alloc(len, GFP_ATOMIC);
-			if (!skb) {
-				BT_ERR("%s no memory for the packet", husb->hdev->name);
-				return -ENOMEM;
-			}
-			skb->dev = (void *) husb->hdev;
-			bt_cb(skb)->pkt_type = type;
-	
-			__reassembly(husb, type) = skb;
-
-			scb = (void *) skb->cb;
-			scb->expect = len;
-		} else {
-			/* Continuation */
-			scb = (void *) skb->cb;
-			len = scb->expect;
-		}
-
-		len = min(len, count);
-		
-		memcpy(skb_put(skb, len), data, len);
-
-		scb->expect -= len;
-		if (!scb->expect) {
-			/* Complete frame */
-			__reassembly(husb, type) = NULL;
-			bt_cb(skb)->pkt_type = type;
-			hci_recv_frame(skb);
-		}
-
-		count -= len; data += len;
-	}
-	return 0;
-}
-
 static void hci_usb_rx_complete(struct urb *urb)
 {
 	struct _urb *_urb = container_of(urb, struct _urb, urb);
@@ -776,7 +692,7 @@ static void hci_usb_rx_complete(struct urb *urb)
 					urb->iso_frame_desc[i].actual_length);
 	
 			if (!urb->iso_frame_desc[i].status)
-				__recv_frame(husb, _urb->type, 
+				hci_recv_fragment(husb->hdev, _urb->type, 
 					urb->transfer_buffer + urb->iso_frame_desc[i].offset,
 					urb->iso_frame_desc[i].actual_length);
 		}
@@ -784,7 +700,7 @@ static void hci_usb_rx_complete(struct urb *urb)
 		;
 #endif
 	} else {
-		err = __recv_frame(husb, _urb->type, urb->transfer_buffer, count);
+		err = hci_recv_fragment(husb->hdev, _urb->type, urb->transfer_buffer, count);
 		if (err < 0) { 
 			BT_ERR("%s corrupted packet: type %d count %d",
 					husb->hdev->name, _urb->type, count);
diff --git a/drivers/bluetooth/hci_usb.h b/drivers/bluetooth/hci_usb.h
index 963fc55cdc85..56cd3a92ceca 100644
--- a/drivers/bluetooth/hci_usb.h
+++ b/drivers/bluetooth/hci_usb.h
@@ -102,9 +102,9 @@ struct hci_usb {
 	struct hci_dev		*hdev;
 
 	unsigned long		state;
-	
+
 	struct usb_device	*udev;
-	
+
 	struct usb_host_endpoint	*bulk_in_ep;
 	struct usb_host_endpoint	*bulk_out_ep;
 	struct usb_host_endpoint	*intr_in_ep;
@@ -116,7 +116,6 @@ struct hci_usb {
 	__u8			ctrl_req;
 
 	struct sk_buff_head	transmit_q[4];
-	struct sk_buff		*reassembly[4];		/* Reassembly buffers */
 
 	rwlock_t		completion_lock;
 
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index b71a5ccc587f..0638730a4a19 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -180,11 +180,6 @@ static inline ssize_t vhci_put_user(struct vhci_data *data,
 	return total;
 }
 
-static loff_t vhci_llseek(struct file *file, loff_t offset, int origin)
-{
-	return -ESPIPE;
-}
-
 static ssize_t vhci_read(struct file *file,
 				char __user *buf, size_t count, loff_t *pos)
 {
@@ -334,7 +329,6 @@ static int vhci_fasync(int fd, struct file *file, int on)
 
 static const struct file_operations vhci_fops = {
 	.owner		= THIS_MODULE,
-	.llseek		= vhci_llseek,
 	.read		= vhci_read,
 	.write		= vhci_write,
 	.poll		= vhci_poll,
diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
deleted file mode 100644
index 4b12e9031fb3..000000000000
--- a/drivers/cdrom/Kconfig
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# CDROM driver configuration
-#
-
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
-	depends on ISA && BLOCK
-
-config CD_NO_IDESCSI
-	bool "Support non-SCSI/IDE/ATAPI CDROM drives"
-	---help---
-	  If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
-	  here, otherwise N. Read the CD-ROM-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that the answer to this question doesn't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these CD-ROM drives. If you are unsure what you
-	  have, say Y and find out whether you have one of the following
-	  drives.
-
-	  For each of these drivers, a <file:Documentation/cdrom/{driver_name}>
-	  exists. Especially in cases where you do not know exactly which kind
-	  of drive you have you should read there. Most of these drivers use a
-	  file drivers/cdrom/{driver_name}.h where you can define your
-	  interface parameters and switch some internal goodies.
-
-	  To compile these CD-ROM drivers as a module, choose M instead of Y.
-
-	  If you want to use any of these CD-ROM drivers, you also have to
-	  answer Y or M to "ISO 9660 CD-ROM file system support" below (this
-	  answer will get "defaulted" for you if you enable any of the Linux
-	  CD-ROM drivers).
-
-config AZTCD
-	tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM  CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is your driver if you have an Aztech CDA268-01A, Orchid
-	  CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or
-	  CR540 CD-ROM drive.  This driver -- just like all these CD-ROM
-	  drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such
-	  as Aztech CDA269-031SE. Please read the file
-	  <file:Documentation/cdrom/aztcd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aztcd.
-
-config GSCD
-	tristate "Goldstar R420 CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  If this is your CD-ROM drive, say Y here.  As described in the file
-	  <file:Documentation/cdrom/gscd>, you might have to change a setting
-	  in the file <file:drivers/cdrom/gscd.h> before compiling the
-	  kernel.  Please read the file <file:Documentation/cdrom/gscd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called gscd.
-
-config SBPCD
-	tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  This driver supports most of the drives which use the Panasonic or
-	  Sound Blaster interface.  Please read the file
-	  <file:Documentation/cdrom/sbpcd>.
-
-	  The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives
-	  (sometimes labeled "Creative"), the Creative Labs CD200, the
-	  Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x
-	  model), the TEAC CD-55A fall under this category.  Some other
-	  "electrically compatible" drives (Vertos, Genoa, some Funai models)
-	  are currently not supported; for the Sanyo H94A drive currently a
-	  separate driver (asked later) is responsible.  Most drives have a
-	  uniquely shaped faceplate, with a caddyless motorized drawer, but
-	  without external brand markings.  The older CR-52x drives have a
-	  caddy and manual loading/eject, but still no external markings.  The
-	  driver is able to do an extended auto-probing for interface
-	  addresses and drive types; this can help to find facts in cases you
-	  are not sure, but can consume some time during the boot process if
-	  none of the supported drives gets found.  Once your drive got found,
-	  you should enter the reported parameters into
-	  <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there.
-
-	  This driver can support up to four CD-ROM controller cards, and each
-	  card can support up to four CD-ROM drives; if you say Y here, you
-	  will be asked how many controller cards you have.  If compiled as a
-	  module, only one controller card (but with up to four drives) is
-	  usable.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sbpcd.
-
-config MCDX
-	tristate "Mitsumi CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  Use this driver if you want to be able to use your Mitsumi LU-005,
-	  FX-001 or FX-001D CD-ROM drive.
-
-	  Please read the file <file:Documentation/cdrom/mcdx>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mcdx.
-
-config OPTCD
-	tristate "Optics Storage DOLPHIN 8000AT CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is the driver for the 'DOLPHIN' drive with a 34-pin Sony
-	  compatible interface. It also works with the Lasermate CR328A. If
-	  you have one of those, say Y. This driver does not work for the
-	  Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that
-	  one. Please read the file <file:Documentation/cdrom/optcd>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called optcd.
-
-config CM206
-	tristate "Philips/LMS CM206 CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  If you have a Philips/LMS CD-ROM drive cm206 in combination with a
-	  cm260 host adapter card, say Y here. Please also read the file
-	  <file:Documentation/cdrom/cm206>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cm206.
-
-config SJCD
-	tristate "Sanyo CDR-H94A CDROM support"
-	depends on CD_NO_IDESCSI
-	help
-	  If this is your CD-ROM drive, say Y here and read the file
-	  <file:Documentation/cdrom/sjcd>. You should then also say Y or M to
-	  "ISO 9660 CD-ROM file system support" below, because that's the
-	  file system used on CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sjcd.
-
-config ISP16_CDI
-	tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  These are sound cards with built-in cdrom interfaces using the OPTi
-	  82C928 or 82C929 chips. Say Y here to have them detected and
-	  possibly configured at boot time. In addition, You'll have to say Y
-	  to a driver for the particular cdrom drive you have attached to the
-	  card. Read <file:Documentation/cdrom/isp16> for details.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called isp16.
-
-config CDU31A
-	tristate "Sony CDU31A/CDU33A CDROM support"
-	depends on CD_NO_IDESCSI && BROKEN_ON_SMP
-	---help---
-	  These CD-ROM drives have a spring-pop-out caddyless drawer, and a
-	  rectangular green LED centered beneath it.  NOTE: these CD-ROM
-	  drives will not be auto detected by the kernel at boot time; you
-	  have to provide the interface address as an option to the kernel at
-	  boot time as described in <file:Documentation/cdrom/cdu31a> or fill
-	  in your parameters into <file:drivers/cdrom/cdu31a.c>.  Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cdu31a.
-
-config CDU535
-	tristate "Sony CDU535 CDROM support"
-	depends on CD_NO_IDESCSI
-	---help---
-	  This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM
-	  drives. Please read the file <file:Documentation/cdrom/sonycd535>.
-
-	  If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM
-	  file system support" below, because that's the file system used on
-	  CD-ROMs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sonycd535.
-
-endmenu
diff --git a/drivers/cdrom/Makefile b/drivers/cdrom/Makefile
index d1d1e5a4be73..774c180a4e11 100644
--- a/drivers/cdrom/Makefile
+++ b/drivers/cdrom/Makefile
@@ -10,14 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR)	+=              cdrom.o
 obj-$(CONFIG_PARIDE_PCD)	+=		cdrom.o
 obj-$(CONFIG_CDROM_PKTCDVD)	+=		cdrom.o
 
-obj-$(CONFIG_AZTCD)		+= aztcd.o
-obj-$(CONFIG_CDU31A)		+= cdu31a.o     cdrom.o
-obj-$(CONFIG_CM206)		+= cm206.o      cdrom.o
-obj-$(CONFIG_GSCD)		+= gscd.o
-obj-$(CONFIG_ISP16_CDI)		+= isp16.o
-obj-$(CONFIG_MCDX)		+= mcdx.o       cdrom.o
-obj-$(CONFIG_OPTCD)		+= optcd.o
-obj-$(CONFIG_SBPCD)		+= sbpcd.o      cdrom.o
-obj-$(CONFIG_SJCD)		+= sjcd.o
-obj-$(CONFIG_CDU535)		+= sonycd535.o
 obj-$(CONFIG_VIOCD)		+= viocd.o      cdrom.o
diff --git a/drivers/cdrom/aztcd.c b/drivers/cdrom/aztcd.c
deleted file mode 100644
index 1f9fb7a96703..000000000000
--- a/drivers/cdrom/aztcd.c
+++ /dev/null
@@ -1,2492 +0,0 @@
-#define AZT_VERSION "2.60"
-
-/*      $Id: aztcd.c,v 2.60 1997/11/29 09:51:19 root Exp root $
-	linux/drivers/block/aztcd.c - Aztech CD268 CDROM driver
-
-	Copyright (C) 1994-98 Werner Zimmermann(Werner.Zimmermann@fht-esslingen.de)
-
-	based on Mitsumi CDROM driver by  Martin Hariss and preworks by
-	Eberhard Moenkeberg; contains contributions by Joe Nardone and Robby 
-	Schirmer.
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2, or (at your option)
-	any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-	HISTORY
-	V0.0    Adaption to Aztech CD268-01A Version 1.3
-		Version is PRE_ALPHA, unresolved points:
-		1. I use busy wait instead of timer wait in STEN_LOW,DTEN_LOW
-		   thus driver causes CPU overhead and is very slow 
-		2. could not find a way to stop the drive, when it is
-		   in data read mode, therefore I had to set
-		   msf.end.min/sec/frame to 0:0:1 (in azt_poll); so only one
-		   frame can be read in sequence, this is also the reason for
-		3. getting 'timeout in state 4' messages, but nevertheless
-		   it works
-		W.Zimmermann, Oct. 31, 1994
-	V0.1    Version is ALPHA, problems #2 and #3 resolved.  
-		W.Zimmermann, Nov. 3, 1994
-	V0.2    Modification to some comments, debugging aids for partial test
-		with Borland C under DOS eliminated. Timer interrupt wait 
-		STEN_LOW_WAIT additionally to busy wait for STEN_LOW implemented; 
-		use it only for the 'slow' commands (ACMD_GET_Q_CHANNEL, ACMD_
-		SEEK_TO_LEAD_IN), all other commands are so 'fast', that busy 
-		waiting seems better to me than interrupt rescheduling.
-		Besides that, when used in the wrong place, STEN_LOW_WAIT causes
-		kernel panic.
-		In function aztPlay command ACMD_PLAY_AUDIO added, should make
-		audio functions work. The Aztech drive needs different commands
-		to read data tracks and play audio tracks.
-		W.Zimmermann, Nov. 8, 1994
-	V0.3    Recognition of missing drive during boot up improved (speeded up).
-		W.Zimmermann, Nov. 13, 1994
-	V0.35   Rewrote the control mechanism in azt_poll (formerly mcd_poll) 
-		including removal of all 'goto' commands. :-); 
-		J. Nardone, Nov. 14, 1994
-	V0.4    Renamed variables and constants to 'azt' instead of 'mcd'; had
-		to make some "compatibility" defines in azt.h; please note,
-		that the source file was renamed to azt.c, the include file to
-		azt.h                
-		Speeded up drive recognition during init (will be a little bit 
-		slower than before if no drive is installed!); suggested by
-		Robby Schirmer.
-		read_count declared volatile and set to AZT_BUF_SIZ to make
-		drive faster (now 300kB/sec, was 60kB/sec before, measured
-		by 'time dd if=/dev/cdrom of=/dev/null bs=2048 count=4096';
-		different AZT_BUF_SIZes were test, above 16 no further im-
-		provement seems to be possible; suggested by E.Moenkeberg.
-		W.Zimmermann, Nov. 18, 1994
-	V0.42   Included getAztStatus command in GetQChannelInfo() to allow
-		reading Q-channel info on audio disks, if drive is stopped, 
-		and some other bug fixes in the audio stuff, suggested by 
-		Robby Schirmer.
-		Added more ioctls (reading data in mode 1 and mode 2).
-		Completely removed the old azt_poll() routine.
-		Detection of ORCHID CDS-3110 in aztcd_init implemented.
-		Additional debugging aids (see the readme file).
-		W.Zimmermann, Dec. 9, 1994  
-	V0.50   Autodetection of drives implemented.
-		W.Zimmermann, Dec. 12, 1994
-	V0.52   Prepared for including in the standard kernel, renamed most
-		variables to contain 'azt', included autoconf.h
-		W.Zimmermann, Dec. 16, 1994        
-	V0.6    Version for being included in the standard Linux kernel.
-		Renamed source and header file to aztcd.c and aztcd.h
-		W.Zimmermann, Dec. 24, 1994
-	V0.7    Changed VERIFY_READ to VERIFY_WRITE in aztcd_ioctl, case
-		CDROMREADMODE1 and CDROMREADMODE2; bug fix in the ioctl,
-		which causes kernel crashes when playing audio, changed 
-		include-files (config.h instead of autoconf.h, removed
-		delay.h)
-		W.Zimmermann, Jan. 8, 1995
-	V0.72   Some more modifications for adaption to the standard kernel.
-		W.Zimmermann, Jan. 16, 1995
-        V0.80   aztcd is now part of the standard kernel since version 1.1.83.
-                Modified the SET_TIMER and CLEAR_TIMER macros to comply with
-                the new timer scheme.
-                W.Zimmermann, Jan. 21, 1995
-        V0.90   Included CDROMVOLCTRL, but with my Aztech drive I can only turn
-                the channels on and off. If it works better with your drive, 
-                please mail me. Also implemented ACMD_CLOSE for CDROMSTART.
-                W.Zimmermann, Jan. 24, 1995
-        V1.00   Implemented close and lock tray commands. Patches supplied by
-		Frank Racis        
-                Added support for loadable MODULEs, so aztcd can now also be
-                loaded by insmod and removed by rmmod during run time
-                Werner Zimmermann, Mar. 24, 95
-        V1.10   Implemented soundcard configuration for Orchid CDS-3110 drives
-                connected to Soundwave32 cards. Release for LST 2.1.
-                (still experimental)
-                Werner Zimmermann, May 8, 95
-        V1.20   Implemented limited support for DOSEMU0.60's cdrom.c. Now it works, but
-                sometimes DOSEMU may hang for 30 seconds or so. A fully functional ver-
-                sion needs an update of Dosemu0.60's cdrom.c, which will come with the 
-                next revision of Dosemu.
-                Also Soundwave32 support now works.
-                Werner Zimmermann, May 22, 95
-	V1.30   Auto-eject feature. Inspired by Franc Racis (racis@psu.edu)
-	        Werner Zimmermann, July 4, 95
-	V1.40   Started multisession support. Implementation copied from mcdx.c
-	        by Heiko Schlittermann. Not tested yet.
-	        Werner Zimmermann, July 15, 95
-        V1.50   Implementation of ioctl CDROMRESET, continued multisession, began
-                XA, but still untested. Heavy modifications to drive status de-
-                tection.
-                Werner Zimmermann, July 25, 95
-        V1.60   XA support now should work. Speeded up drive recognition in cases, 
-                where no drive is installed.
-                Werner Zimmermann, August 8, 1995
-        V1.70   Multisession support now is completed, but there is still not 
-                enough testing done. If you can test it, please contact me. For
-                details please read Documentation/cdrom/aztcd
-                Werner Zimmermann, August 19, 1995
-        V1.80   Modification to suit the new kernel boot procedure introduced
-                with kernel 1.3.33. Will definitely not work with older kernels.
-                Programming done by Linus himself.
-                Werner Zimmermann, October 11, 1995
-	V1.90   Support for Conrad TXC drives, thank's to Jochen Kunz and Olaf Kaluza.
-	        Werner Zimmermann, October 21, 1995
-        V2.00   Changed #include "blk.h" to <linux/blk.h> as the directory
-                structure was changed. README.aztcd is now /usr/src/docu-
-                mentation/cdrom/aztcd
-                Werner Zimmermann, November 10, 95
-        V2.10   Started to modify azt_poll to prevent reading beyond end of
-                tracks.
-                Werner Zimmermann, December 3, 95
-        V2.20   Changed some comments
-                Werner Zimmermann, April 1, 96
-        V2.30   Implemented support for CyCDROM CR520, CR940, Code for CR520 
-        	delivered by H.Berger with preworks by E.Moenkeberg.
-                Werner Zimmermann, April 29, 96
-        V2.40   Reorganized the placement of functions in the source code file
-                to reflect the layered approach; did not actually change code
-                Werner Zimmermann, May 1, 96
-        V2.50   Heiko Eissfeldt suggested to remove some VERIFY_READs in 
-                aztcd_ioctl; check_aztcd_media_change modified 
-                Werner Zimmermann, May 16, 96       
-	V2.60   Implemented Auto-Probing; made changes for kernel's 2.1.xx blocksize
-                Adaption to linux kernel > 2.1.0
-		Werner Zimmermann, Nov 29, 97
-		
-        November 1999 -- Make kernel-parameter implementation work with 2.3.x 
-	                 Removed init_module & cleanup_module in favor of 
-			 module_init & module_exit.
-			 Torben Mathiasen <tmm@image.dk>
-*/
-
-#include <linux/blkdev.h>
-#include "aztcd.h"
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-
-#include <asm/uaccess.h>
-
-/*###########################################################################
-  Defines
-  ###########################################################################
-*/
-
-#define MAJOR_NR AZTECH_CDROM_MAJOR
-#define QUEUE (azt_queue)
-#define CURRENT elv_next_request(azt_queue)
-#define SET_TIMER(func, jifs)   delay_timer.expires = jiffies + (jifs); \
-                                delay_timer.function = (void *) (func); \
-                                add_timer(&delay_timer);
-
-#define CLEAR_TIMER             del_timer(&delay_timer);
-
-#define RETURNM(message,value) {printk("aztcd: Warning: %s failed\n",message);\
-                                return value;}
-#define RETURN(message)        {printk("aztcd: Warning: %s failed\n",message);\
-                                return;}
-
-/* Macros to switch the IDE-interface to the slave device and back to the master*/
-#define SWITCH_IDE_SLAVE  outb_p(0xa0,azt_port+6); \
-	                  outb_p(0x10,azt_port+6); \
-	                  outb_p(0x00,azt_port+7); \
-	                  outb_p(0x10,azt_port+6);
-#define SWITCH_IDE_MASTER outb_p(0xa0,azt_port+6);
-
-
-#if 0
-#define AZT_TEST
-#define AZT_TEST1		/* <int-..> */
-#define AZT_TEST2		/* do_aztcd_request */
-#define AZT_TEST3		/* AZT_S_state */
-#define AZT_TEST4		/* QUICK_LOOP-counter */
-#define AZT_TEST5		/* port(1) state */
-#define AZT_DEBUG
-#define AZT_DEBUG_MULTISESSION
-#endif
-
-static struct request_queue *azt_queue;
-
-static int current_valid(void)
-{
-        return CURRENT &&
-		CURRENT->cmd == READ &&
-		CURRENT->sector != -1;
-}
-
-#define AFL_STATUSorDATA (AFL_STATUS | AFL_DATA)
-#define AZT_BUF_SIZ 16
-
-#define READ_TIMEOUT 3000
-
-#define azt_port aztcd		/*needed for the modutils */
-
-/*##########################################################################
-  Type Definitions
-  ##########################################################################
-*/
-enum azt_state_e { AZT_S_IDLE,	/* 0 */
-	AZT_S_START,		/* 1 */
-	AZT_S_MODE,		/* 2 */
-	AZT_S_READ,		/* 3 */
-	AZT_S_DATA,		/* 4 */
-	AZT_S_STOP,		/* 5 */
-	AZT_S_STOPPING		/* 6 */
-};
-enum azt_read_modes { AZT_MODE_0,	/*read mode for audio disks, not supported by Aztech firmware */
-	AZT_MODE_1,		/*read mode for normal CD-ROMs */
-	AZT_MODE_2		/*read mode for XA CD-ROMs */
-};
-
-/*##########################################################################
-  Global Variables
-  ##########################################################################
-*/
-static int aztPresent = 0;
-
-static volatile int azt_transfer_is_active = 0;
-
-static char azt_buf[CD_FRAMESIZE_RAW * AZT_BUF_SIZ];	/*buffer for block size conversion */
-#if AZT_PRIVATE_IOCTLS
-static char buf[CD_FRAMESIZE_RAW];	/*separate buffer for the ioctls */
-#endif
-
-static volatile int azt_buf_bn[AZT_BUF_SIZ], azt_next_bn;
-static volatile int azt_buf_in, azt_buf_out = -1;
-static volatile int azt_error = 0;
-static int azt_open_count = 0;
-static volatile enum azt_state_e azt_state = AZT_S_IDLE;
-#ifdef AZT_TEST3
-static volatile enum azt_state_e azt_state_old = AZT_S_STOP;
-static volatile int azt_st_old = 0;
-#endif
-static volatile enum azt_read_modes azt_read_mode = AZT_MODE_1;
-
-static int azt_mode = -1;
-static volatile int azt_read_count = 1;
-
-static int azt_port = AZT_BASE_ADDR;
-
-module_param(azt_port, int, 0);
-
-static int azt_port_auto[16] = AZT_BASE_AUTO;
-
-static char azt_cont = 0;
-static char azt_init_end = 0;
-static char azt_auto_eject = AZT_AUTO_EJECT;
-
-static int AztTimeout, AztTries;
-static DECLARE_WAIT_QUEUE_HEAD(azt_waitq);
-static DEFINE_TIMER(delay_timer, NULL, 0, 0);
-
-static struct azt_DiskInfo DiskInfo;
-static struct azt_Toc Toc[MAX_TRACKS];
-static struct azt_Play_msf azt_Play;
-
-static int aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-static char aztDiskChanged = 1;
-static char aztTocUpToDate = 0;
-
-static unsigned char aztIndatum;
-static unsigned long aztTimeOutCount;
-static int aztCmd = 0;
-
-static DEFINE_SPINLOCK(aztSpin);
-
-/*###########################################################################
-   Function Prototypes
-  ###########################################################################
-*/
-/* CDROM Drive Low Level I/O Functions */
-static void aztStatTimer(void);
-
-/* CDROM Drive Command Functions */
-static int aztGetDiskInfo(void);
-#if AZT_MULTISESSION
-static int aztGetMultiDiskInfo(void);
-#endif
-static int aztGetToc(int multi);
-
-/* Kernel Interface Functions */
-static int check_aztcd_media_change(struct gendisk *disk);
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
-		       unsigned long arg);
-static int aztcd_open(struct inode *ip, struct file *fp);
-static int aztcd_release(struct inode *inode, struct file *file);
-
-static struct block_device_operations azt_fops = {
-	.owner		= THIS_MODULE,
-	.open		= aztcd_open,
-	.release	= aztcd_release,
-	.ioctl		= aztcd_ioctl,
-	.media_changed	= check_aztcd_media_change,
-};
-
-/* Aztcd State Machine: Controls Drive Operating State */
-static void azt_poll(void);
-
-/* Miscellaneous support functions */
-static void azt_hsg2msf(long hsg, struct msf *msf);
-static long azt_msf2hsg(struct msf *mp);
-static void azt_bin2bcd(unsigned char *p);
-static int azt_bcd2bin(unsigned char bcd);
-
-/*##########################################################################
-  CDROM Drive Low Level I/O Functions
-  ##########################################################################
-*/
-/* Macros for the drive hardware interface handshake, these macros use
-   busy waiting */
-/* Wait for OP_OK = drive answers with AFL_OP_OK after receiving a command*/
-# define OP_OK op_ok()
-static void op_ok(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(DATA_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait OP_OK\n");
-			break;
-		}
-	} while (aztIndatum != AFL_OP_OK);
-}
-
-/* Wait for PA_OK = drive answers with AFL_PA_OK after receiving parameters*/
-#if 0
-# define PA_OK pa_ok()
-static void pa_ok(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(DATA_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait PA_OK\n");
-			break;
-		}
-	} while (aztIndatum != AFL_PA_OK);
-}
-#endif
-
-/* Wait for STEN=Low = handshake signal 'AFL_.._OK available or command executed*/
-# define STEN_LOW  sten_low()
-static void sten_low(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(STATUS_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			if (azt_init_end)
-				printk
-				    ("aztcd: Error Wait STEN_LOW commands:%x\n",
-				     aztCmd);
-			break;
-		}
-	} while (aztIndatum & AFL_STATUS);
-}
-
-/* Wait for DTEN=Low = handshake signal 'Data available'*/
-# define DTEN_LOW dten_low()
-static void dten_low(void)
-{
-	aztTimeOutCount = 0;
-	do {
-		aztIndatum = inb(STATUS_PORT);
-		aztTimeOutCount++;
-		if (aztTimeOutCount >= AZT_TIMEOUT) {
-			printk("aztcd: Error Wait DTEN_OK\n");
-			break;
-		}
-	} while (aztIndatum & AFL_DATA);
-}
-
-/* 
- * Macro for timer wait on STEN=Low, should only be used for 'slow' commands;
- * may cause kernel panic when used in the wrong place
-*/
-#define STEN_LOW_WAIT   statusAzt()
-static void statusAzt(void)
-{
-	AztTimeout = AZT_STATUS_DELAY;
-	SET_TIMER(aztStatTimer, HZ / 100);
-	sleep_on(&azt_waitq);
-	if (AztTimeout <= 0)
-		printk("aztcd: Error Wait STEN_LOW_WAIT command:%x\n",
-		       aztCmd);
-	return;
-}
-
-static void aztStatTimer(void)
-{
-	if (!(inb(STATUS_PORT) & AFL_STATUS)) {
-		wake_up(&azt_waitq);
-		return;
-	}
-	AztTimeout--;
-	if (AztTimeout <= 0) {
-		wake_up(&azt_waitq);
-		printk("aztcd: Error aztStatTimer: Timeout\n");
-		return;
-	}
-	SET_TIMER(aztStatTimer, HZ / 100);
-}
-
-/*##########################################################################
-  CDROM Drive Command Functions
-  ##########################################################################
-*/
-/* 
- * Send a single command, return -1 on error, else 0
-*/
-static int aztSendCmd(int cmd)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: Executing command %x\n", cmd);
-#endif
-
-	if ((azt_port == 0x1f0) || (azt_port == 0x170))
-		SWITCH_IDE_SLAVE;	/*switch IDE interface to slave configuration */
-
-	aztCmd = cmd;
-	outb(POLLED, MODE_PORT);
-	do {
-		if (inb(STATUS_PORT) & AFL_STATUS)
-			break;
-		inb(DATA_PORT);	/* if status left from last command, read and */
-	} while (1);		/* discard it */
-	do {
-		if (inb(STATUS_PORT) & AFL_DATA)
-			break;
-		inb(DATA_PORT);	/* if data left from last command, read and */
-	} while (1);		/* discard it */
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		outb((unsigned char) cmd, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_OP_OK) {
-			return 0;
-		}		/*OP_OK? */
-		if (data == AFL_OP_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: aztSendCmd %x  Error Code %x\n",
-			     cmd, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSendCmd %x \n", cmd);
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSendCmd", -1);
-}
-
-/*
- * Send a play or read command to the drive, return -1 on error, else 0
-*/
-static int sendAztCmd(int cmd, struct azt_Play_msf *params)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: play start=%02x:%02x:%02x  end=%02x:%02x:%02x\n",
-	       params->start.min, params->start.sec, params->start.frame,
-	       params->end.min, params->end.sec, params->end.frame);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(cmd);
-		outb(params->start.min, CMD_PORT);
-		outb(params->start.sec, CMD_PORT);
-		outb(params->start.frame, CMD_PORT);
-		outb(params->end.min, CMD_PORT);
-		outb(params->end.sec, CMD_PORT);
-		outb(params->end.frame, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {
-			return 0;
-		}		/*PA_OK ? */
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: sendAztCmd %x  Error Code %x\n",
-			     cmd, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: sendAztCmd %x\n ", cmd);
-		azt_error = 0xA5;
-	}
-	RETURNM("sendAztCmd", -1);
-}
-
-/*
- * Send a seek command to the drive, return -1 on error, else 0
-*/
-static int aztSeek(struct azt_Play_msf *params)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: aztSeek %02x:%02x:%02x\n",
-	       params->start.min, params->start.sec, params->start.frame);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(ACMD_SEEK);
-		outb(params->start.min, CMD_PORT);
-		outb(params->start.sec, CMD_PORT);
-		outb(params->start.frame, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {
-			return 0;
-		}		/*PA_OK ? */
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk("### Error 1 aztcd: aztSeek\n");
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSeek\n ");
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSeek", -1);
-}
-
-/* Send a Set Disk Type command
-   does not seem to work with Aztech drives, behavior is completely indepen-
-   dent on which mode is set ???
-*/
-static int aztSetDiskType(int type)
-{
-	unsigned char data;
-	int retry;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: set disk type command: type= %i\n", type);
-#endif
-	for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) {
-		aztSendCmd(ACMD_SET_DISK_TYPE);
-		outb(type, CMD_PORT);
-		STEN_LOW;
-		data = inb(DATA_PORT);
-		if (data == AFL_PA_OK) {	/*PA_OK ? */
-			azt_read_mode = type;
-			return 0;
-		}
-		if (data == AFL_PA_ERR) {
-			STEN_LOW;
-			data = inb(DATA_PORT);
-			printk
-			    ("### Error 1 aztcd: aztSetDiskType %x Error Code %x\n",
-			     type, data);
-		}
-	}
-	if (retry >= AZT_RETRY_ATTEMPTS) {
-		printk("### Error 2 aztcd: aztSetDiskType %x\n ", type);
-		azt_error = 0xA5;
-	}
-	RETURNM("aztSetDiskType", -1);
-}
-
-
-/* used in azt_poll to poll the status, expects another program to issue a 
- * ACMD_GET_STATUS directly before 
- */
-static int aztStatus(void)
-{
-	int st;
-/*	int i;
-
-	i = inb(STATUS_PORT) & AFL_STATUS;    is STEN=0?    ???
-	if (!i)
-*/ STEN_LOW;
-	if (aztTimeOutCount < AZT_TIMEOUT) {
-		st = inb(DATA_PORT) & 0xFF;
-		return st;
-	} else
-		RETURNM("aztStatus", -1);
-}
-
-/*
- * Get the drive status
- */
-static int getAztStatus(void)
-{
-	int st;
-
-	if (aztSendCmd(ACMD_GET_STATUS))
-		RETURNM("getAztStatus 1", -1);
-	STEN_LOW;
-	st = inb(DATA_PORT) & 0xFF;
-#ifdef AZT_DEBUG
-	printk("aztcd: Status = %x\n", st);
-#endif
-	if ((st == 0xFF) || (st & AST_CMD_CHECK)) {
-		printk
-		    ("aztcd: AST_CMD_CHECK error or no status available\n");
-		return -1;
-	}
-
-	if (((st & AST_MODE_BITS) != AST_BUSY)
-	    && (aztAudioStatus == CDROM_AUDIO_PLAY))
-		/* XXX might be an error? look at q-channel? */
-		aztAudioStatus = CDROM_AUDIO_COMPLETED;
-
-	if ((st & AST_DSK_CHG) || (st & AST_NOT_READY)) {
-		aztDiskChanged = 1;
-		aztTocUpToDate = 0;
-		aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-	}
-	return st;
-}
-
-
-/*
- * Send a 'Play' command and get the status.  Use only from the top half.
- */
-static int aztPlay(struct azt_Play_msf *arg)
-{
-	if (sendAztCmd(ACMD_PLAY_AUDIO, arg) < 0)
-		RETURNM("aztPlay", -1);
-	return 0;
-}
-
-/*
- * Subroutines to automatically close the door (tray) and 
- * lock it closed when the cd is mounted.  Leave the tray
- * locking as an option
- */
-static void aztCloseDoor(void)
-{
-	aztSendCmd(ACMD_CLOSE);
-	STEN_LOW;
-	return;
-}
-
-static void aztLockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
-	aztSendCmd(ACMD_LOCK);
-	STEN_LOW;
-#endif
-	return;
-}
-
-static void aztUnlockDoor(void)
-{
-#if AZT_ALLOW_TRAY_LOCK
-	aztSendCmd(ACMD_UNLOCK);
-	STEN_LOW;
-#endif
-	return;
-}
-
-/*
- * Read a value from the drive.  Should return quickly, so a busy wait
- * is used to avoid excessive rescheduling. The read command itself must
- * be issued with aztSendCmd() directly before
- */
-static int aztGetValue(unsigned char *result)
-{
-	int s;
-
-	STEN_LOW;
-	if (aztTimeOutCount >= AZT_TIMEOUT) {
-		printk("aztcd: aztGetValue timeout\n");
-		return -1;
-	}
-	s = inb(DATA_PORT) & 0xFF;
-	*result = (unsigned char) s;
-	return 0;
-}
-
-/*
- * Read the current Q-channel info.  Also used for reading the
- * table of contents.
- */
-static int aztGetQChannelInfo(struct azt_Toc *qp)
-{
-	unsigned char notUsed;
-	int st;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetQChannelInfo  Time:%li\n", jiffies);
-#endif
-	if ((st = getAztStatus()) == -1)
-		RETURNM("aztGetQChannelInfo 1", -1);
-	if (aztSendCmd(ACMD_GET_Q_CHANNEL))
-		RETURNM("aztGetQChannelInfo 2", -1);
-	/*STEN_LOW_WAIT; ??? Dosemu0.60's cdrom.c does not like STEN_LOW_WAIT here */
-	if (aztGetValue(&notUsed))
-		RETURNM("aztGetQChannelInfo 3", -1);	/*??? Nullbyte einlesen */
-	if ((st & AST_MODE_BITS) == AST_INITIAL) {
-		qp->ctrl_addr = 0;	/* when audio stop ACMD_GET_Q_CHANNEL returns */
-		qp->track = 0;	/* only one byte with Aztech drives */
-		qp->pointIndex = 0;
-		qp->trackTime.min = 0;
-		qp->trackTime.sec = 0;
-		qp->trackTime.frame = 0;
-		qp->diskTime.min = 0;
-		qp->diskTime.sec = 0;
-		qp->diskTime.frame = 0;
-		return 0;
-	} else {
-		if (aztGetValue(&qp->ctrl_addr) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->track) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->pointIndex) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->trackTime.min) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->trackTime.sec) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->trackTime.frame) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&notUsed) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->diskTime.min) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->diskTime.sec) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-		if (aztGetValue(&qp->diskTime.frame) < 0)
-			RETURNM("aztGetQChannelInfo 4", -1);
-	}
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztGetQChannelInfo  Time:%li\n", jiffies);
-#endif
-	return 0;
-}
-
-/*
- * Read the table of contents (TOC) and TOC header if necessary
- */
-static int aztUpdateToc(void)
-{
-	int st;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztUpdateToc  Time:%li\n", jiffies);
-#endif
-	if (aztTocUpToDate)
-		return 0;
-
-	if (aztGetDiskInfo() < 0)
-		return -EIO;
-
-	if (aztGetToc(0) < 0)
-		return -EIO;
-
-	/*audio disk detection
-	   with my Aztech drive there is no audio status bit, so I use the copy
-	   protection bit of the first track. If this track is copy protected 
-	   (copy bit = 0), I assume, it's an audio  disk. Strange, but works ??? */
-	if (!(Toc[DiskInfo.first].ctrl_addr & 0x40))
-		DiskInfo.audio = 1;
-	else
-		DiskInfo.audio = 0;
-
-	/* XA detection */
-	if (!DiskInfo.audio) {
-		azt_Play.start.min = 0;	/*XA detection only seems to work */
-		azt_Play.start.sec = 2;	/*when we play a track */
-		azt_Play.start.frame = 0;
-		azt_Play.end.min = 0;
-		azt_Play.end.sec = 0;
-		azt_Play.end.frame = 1;
-		if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
-			return -1;
-		DTEN_LOW;
-		for (st = 0; st < CD_FRAMESIZE; st++)
-			inb(DATA_PORT);
-	}
-	DiskInfo.xa = getAztStatus() & AST_MODE;
-	if (DiskInfo.xa) {
-		printk
-		    ("aztcd: XA support experimental - mail results to Werner.Zimmermann@fht-esslingen.de\n");
-	}
-
-	/*multisession detection
-	   support for multisession CDs is done automatically with Aztech drives,
-	   we don't have to take care about TOC redirection; if we want the isofs
-	   to take care about redirection, we have to set AZT_MULTISESSION to 1 */
-	DiskInfo.multi = 0;
-#if AZT_MULTISESSION
-	if (DiskInfo.xa) {
-		aztGetMultiDiskInfo();	/*here Disk.Info.multi is set */
-	}
-#endif
-	if (DiskInfo.multi) {
-		DiskInfo.lastSession.min = Toc[DiskInfo.next].diskTime.min;
-		DiskInfo.lastSession.sec = Toc[DiskInfo.next].diskTime.sec;
-		DiskInfo.lastSession.frame =
-		    Toc[DiskInfo.next].diskTime.frame;
-		printk("aztcd: Multisession support experimental\n");
-	} else {
-		DiskInfo.lastSession.min =
-		    Toc[DiskInfo.first].diskTime.min;
-		DiskInfo.lastSession.sec =
-		    Toc[DiskInfo.first].diskTime.sec;
-		DiskInfo.lastSession.frame =
-		    Toc[DiskInfo.first].diskTime.frame;
-	}
-
-	aztTocUpToDate = 1;
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztUpdateToc  Time:%li\n", jiffies);
-#endif
-	return 0;
-}
-
-
-/* Read the table of contents header, i.e. no. of tracks and start of first 
- * track
- */
-static int aztGetDiskInfo(void)
-{
-	int limit;
-	unsigned char test;
-	struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetDiskInfo  Time:%li\n", jiffies);
-#endif
-	if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
-		RETURNM("aztGetDiskInfo 1", -1);
-	STEN_LOW_WAIT;
-	test = 0;
-	for (limit = 300; limit > 0; limit--) {
-		if (aztGetQChannelInfo(&qInfo) < 0)
-			RETURNM("aztGetDiskInfo 2", -1);
-		if (qInfo.pointIndex == 0xA0) {	/*Number of FirstTrack */
-			DiskInfo.first = qInfo.diskTime.min;
-			DiskInfo.first = azt_bcd2bin(DiskInfo.first);
-			test = test | 0x01;
-		}
-		if (qInfo.pointIndex == 0xA1) {	/*Number of LastTrack */
-			DiskInfo.last = qInfo.diskTime.min;
-			DiskInfo.last = azt_bcd2bin(DiskInfo.last);
-			test = test | 0x02;
-		}
-		if (qInfo.pointIndex == 0xA2) {	/*DiskLength */
-			DiskInfo.diskLength.min = qInfo.diskTime.min;
-			DiskInfo.diskLength.sec = qInfo.diskTime.sec;
-			DiskInfo.diskLength.frame = qInfo.diskTime.frame;
-			test = test | 0x04;
-		}
-		if ((qInfo.pointIndex == DiskInfo.first) && (test & 0x01)) {	/*StartTime of First Track */
-			DiskInfo.firstTrack.min = qInfo.diskTime.min;
-			DiskInfo.firstTrack.sec = qInfo.diskTime.sec;
-			DiskInfo.firstTrack.frame = qInfo.diskTime.frame;
-			test = test | 0x08;
-		}
-		if (test == 0x0F)
-			break;
-	}
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztGetDiskInfo  Time:%li\n", jiffies);
-	printk
-	    ("Disk Info: first %d last %d length %02X:%02X.%02X dez  first %02X:%02X.%02X dez\n",
-	     DiskInfo.first, DiskInfo.last, DiskInfo.diskLength.min,
-	     DiskInfo.diskLength.sec, DiskInfo.diskLength.frame,
-	     DiskInfo.firstTrack.min, DiskInfo.firstTrack.sec,
-	     DiskInfo.firstTrack.frame);
-#endif
-	if (test != 0x0F)
-		return -1;
-	return 0;
-}
-
-#if AZT_MULTISESSION
-/*
- * Get Multisession Disk Info
- */
-static int aztGetMultiDiskInfo(void)
-{
-	int limit, k = 5;
-	unsigned char test;
-	struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetMultiDiskInfo\n");
-#endif
-
-	do {
-		azt_Play.start.min = Toc[DiskInfo.last + 1].diskTime.min;
-		azt_Play.start.sec = Toc[DiskInfo.last + 1].diskTime.sec;
-		azt_Play.start.frame =
-		    Toc[DiskInfo.last + 1].diskTime.frame;
-		test = 0;
-
-		for (limit = 30; limit > 0; limit--) {	/*Seek for LeadIn of next session */
-			if (aztSeek(&azt_Play))
-				RETURNM("aztGetMultiDiskInfo 1", -1);
-			if (aztGetQChannelInfo(&qInfo) < 0)
-				RETURNM("aztGetMultiDiskInfo 2", -1);
-			if ((qInfo.track == 0) && (qInfo.pointIndex))
-				break;	/*LeadIn found */
-			if ((azt_Play.start.sec += 10) > 59) {
-				azt_Play.start.sec = 0;
-				azt_Play.start.min++;
-			}
-		}
-		if (!limit)
-			break;	/*Check, if a leadin track was found, if not we're
-				   at the end of the disk */
-#ifdef AZT_DEBUG_MULTISESSION
-		printk("leadin found track %d  pointIndex %x  limit %d\n",
-		       qInfo.track, qInfo.pointIndex, limit);
-#endif
-		for (limit = 300; limit > 0; limit--) {
-			if (++azt_Play.start.frame > 74) {
-				azt_Play.start.frame = 0;
-				if (azt_Play.start.sec > 59) {
-					azt_Play.start.sec = 0;
-					azt_Play.start.min++;
-				}
-			}
-			if (aztSeek(&azt_Play))
-				RETURNM("aztGetMultiDiskInfo 3", -1);
-			if (aztGetQChannelInfo(&qInfo) < 0)
-				RETURNM("aztGetMultiDiskInfo 4", -1);
-			if (qInfo.pointIndex == 0xA0) {	/*Number of NextTrack */
-				DiskInfo.next = qInfo.diskTime.min;
-				DiskInfo.next = azt_bcd2bin(DiskInfo.next);
-				test = test | 0x01;
-			}
-			if (qInfo.pointIndex == 0xA1) {	/*Number of LastTrack */
-				DiskInfo.last = qInfo.diskTime.min;
-				DiskInfo.last = azt_bcd2bin(DiskInfo.last);
-				test = test | 0x02;
-			}
-			if (qInfo.pointIndex == 0xA2) {	/*DiskLength */
-				DiskInfo.diskLength.min =
-				    qInfo.diskTime.min;
-				DiskInfo.diskLength.sec =
-				    qInfo.diskTime.sec;
-				DiskInfo.diskLength.frame =
-				    qInfo.diskTime.frame;
-				test = test | 0x04;
-			}
-			if ((qInfo.pointIndex == DiskInfo.next) && (test & 0x01)) {	/*StartTime of Next Track */
-				DiskInfo.nextSession.min =
-				    qInfo.diskTime.min;
-				DiskInfo.nextSession.sec =
-				    qInfo.diskTime.sec;
-				DiskInfo.nextSession.frame =
-				    qInfo.diskTime.frame;
-				test = test | 0x08;
-			}
-			if (test == 0x0F)
-				break;
-		}
-#ifdef AZT_DEBUG_MULTISESSION
-		printk
-		    ("MultiDisk Info: first %d next %d last %d length %02x:%02x.%02x dez  first %02x:%02x.%02x dez  next %02x:%02x.%02x dez\n",
-		     DiskInfo.first, DiskInfo.next, DiskInfo.last,
-		     DiskInfo.diskLength.min, DiskInfo.diskLength.sec,
-		     DiskInfo.diskLength.frame, DiskInfo.firstTrack.min,
-		     DiskInfo.firstTrack.sec, DiskInfo.firstTrack.frame,
-		     DiskInfo.nextSession.min, DiskInfo.nextSession.sec,
-		     DiskInfo.nextSession.frame);
-#endif
-		if (test != 0x0F)
-			break;
-		else
-			DiskInfo.multi = 1;	/*found TOC of more than one session */
-		aztGetToc(1);
-	} while (--k);
-
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztGetMultiDiskInfo  Time:%li\n", jiffies);
-#endif
-	return 0;
-}
-#endif
-
-/*
- * Read the table of contents (TOC)
- */
-static int aztGetToc(int multi)
-{
-	int i, px;
-	int limit;
-	struct azt_Toc qInfo;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztGetToc  Time:%li\n", jiffies);
-#endif
-	if (!multi) {
-		for (i = 0; i < MAX_TRACKS; i++)
-			Toc[i].pointIndex = 0;
-		i = DiskInfo.last + 3;
-	} else {
-		for (i = DiskInfo.next; i < MAX_TRACKS; i++)
-			Toc[i].pointIndex = 0;
-		i = DiskInfo.last + 4 - DiskInfo.next;
-	}
-
-/*Is there a good reason to stop motor before TOC read?
-  if (aztSendCmd(ACMD_STOP)) RETURNM("aztGetToc 1",-1);
-      STEN_LOW_WAIT;
-*/
-
-	if (!multi) {
-		azt_mode = 0x05;
-		if (aztSendCmd(ACMD_SEEK_TO_LEADIN))
-			RETURNM("aztGetToc 2", -1);
-		STEN_LOW_WAIT;
-	}
-	for (limit = 300; limit > 0; limit--) {
-		if (multi) {
-			if (++azt_Play.start.sec > 59) {
-				azt_Play.start.sec = 0;
-				azt_Play.start.min++;
-			}
-			if (aztSeek(&azt_Play))
-				RETURNM("aztGetToc 3", -1);
-		}
-		if (aztGetQChannelInfo(&qInfo) < 0)
-			break;
-
-		px = azt_bcd2bin(qInfo.pointIndex);
-
-		if (px > 0 && px < MAX_TRACKS && qInfo.track == 0)
-			if (Toc[px].pointIndex == 0) {
-				Toc[px] = qInfo;
-				i--;
-			}
-
-		if (i <= 0)
-			break;
-	}
-
-	Toc[DiskInfo.last + 1].diskTime = DiskInfo.diskLength;
-	Toc[DiskInfo.last].trackTime = DiskInfo.diskLength;
-
-#ifdef AZT_DEBUG_MULTISESSION
-	printk("aztcd: exiting aztGetToc\n");
-	for (i = 1; i <= DiskInfo.last + 1; i++)
-		printk
-		    ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez  %02X:%02X.%02X dez\n",
-		     i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
-		     Toc[i].trackTime.min, Toc[i].trackTime.sec,
-		     Toc[i].trackTime.frame, Toc[i].diskTime.min,
-		     Toc[i].diskTime.sec, Toc[i].diskTime.frame);
-	for (i = 100; i < 103; i++)
-		printk
-		    ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez  %02X:%02X.%02X dez\n",
-		     i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex,
-		     Toc[i].trackTime.min, Toc[i].trackTime.sec,
-		     Toc[i].trackTime.frame, Toc[i].diskTime.min,
-		     Toc[i].diskTime.sec, Toc[i].diskTime.frame);
-#endif
-
-	return limit > 0 ? 0 : -1;
-}
-
-
-/*##########################################################################
-  Kernel Interface Functions
-  ##########################################################################
-*/
-
-#ifndef MODULE
-static int __init aztcd_setup(char *str)
-{
-	int ints[4];
-
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-
-	if (ints[0] > 0)
-		azt_port = ints[1];
-	if (ints[1] > 1)
-		azt_cont = ints[2];
-	return 1;
-}
-
-__setup("aztcd=", aztcd_setup);
-
-#endif				/* !MODULE */
-
-/* 
- * Checking if the media has been changed
-*/
-static int check_aztcd_media_change(struct gendisk *disk)
-{
-	if (aztDiskChanged) {	/* disk changed */
-		aztDiskChanged = 0;
-		return 1;
-	} else
-		return 0;	/* no change */
-}
-
-/*
- * Kernel IO-controls
-*/
-static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
-		       unsigned long arg)
-{
-	int i;
-	struct azt_Toc qInfo;
-	struct cdrom_ti ti;
-	struct cdrom_tochdr tocHdr;
-	struct cdrom_msf msf;
-	struct cdrom_tocentry entry;
-	struct azt_Toc *tocPtr;
-	struct cdrom_subchnl subchnl;
-	struct cdrom_volctrl volctrl;
-	void __user *argp = (void __user *)arg;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztcd_ioctl - Command:%x   Time: %li\n",
-	       cmd, jiffies);
-	printk("aztcd Status %x\n", getAztStatus());
-#endif
-	if (!ip)
-		RETURNM("aztcd_ioctl 1", -EINVAL);
-	if (getAztStatus() < 0)
-		RETURNM("aztcd_ioctl 2", -EIO);
-	if ((!aztTocUpToDate) || (aztDiskChanged)) {
-		if ((i = aztUpdateToc()) < 0)
-			RETURNM("aztcd_ioctl 3", i);	/* error reading TOC */
-	}
-
-	switch (cmd) {
-	case CDROMSTART:	/* Spin up the drive. Don't know, what to do,
-				   at least close the tray */
-#if AZT_PRIVATE_IOCTLS
-		if (aztSendCmd(ACMD_CLOSE))
-			RETURNM("aztcd_ioctl 4", -1);
-		STEN_LOW_WAIT;
-#endif
-		break;
-	case CDROMSTOP:	/* Spin down the drive */
-		if (aztSendCmd(ACMD_STOP))
-			RETURNM("aztcd_ioctl 5", -1);
-		STEN_LOW_WAIT;
-		/* should we do anything if it fails? */
-		aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-		break;
-	case CDROMPAUSE:	/* Pause the drive */
-		if (aztAudioStatus != CDROM_AUDIO_PLAY)
-			return -EINVAL;
-
-		if (aztGetQChannelInfo(&qInfo) < 0) {	/* didn't get q channel info */
-			aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-			RETURNM("aztcd_ioctl 7", 0);
-		}
-		azt_Play.start = qInfo.diskTime;	/* remember restart point */
-
-		if (aztSendCmd(ACMD_PAUSE))
-			RETURNM("aztcd_ioctl 8", -1);
-		STEN_LOW_WAIT;
-		aztAudioStatus = CDROM_AUDIO_PAUSED;
-		break;
-	case CDROMRESUME:	/* Play it again, Sam */
-		if (aztAudioStatus != CDROM_AUDIO_PAUSED)
-			return -EINVAL;
-		/* restart the drive at the saved position. */
-		i = aztPlay(&azt_Play);
-		if (i < 0) {
-			aztAudioStatus = CDROM_AUDIO_ERROR;
-			return -EIO;
-		}
-		aztAudioStatus = CDROM_AUDIO_PLAY;
-		break;
-	case CDROMMULTISESSION:	/*multisession support -- experimental */
-		{
-			struct cdrom_multisession ms;
-#ifdef AZT_DEBUG
-			printk("aztcd ioctl MULTISESSION\n");
-#endif
-			if (copy_from_user(&ms, argp,
-			     sizeof(struct cdrom_multisession)))
-				return -EFAULT;
-			if (ms.addr_format == CDROM_MSF) {
-				ms.addr.msf.minute =
-				    azt_bcd2bin(DiskInfo.lastSession.min);
-				ms.addr.msf.second =
-				    azt_bcd2bin(DiskInfo.lastSession.sec);
-				ms.addr.msf.frame =
-				    azt_bcd2bin(DiskInfo.lastSession.
-						frame);
-			} else if (ms.addr_format == CDROM_LBA)
-				ms.addr.lba =
-				    azt_msf2hsg(&DiskInfo.lastSession);
-			else
-				return -EINVAL;
-			ms.xa_flag = DiskInfo.xa;
-			if (copy_to_user(argp, &ms,
-			     sizeof(struct cdrom_multisession)))
-				return -EFAULT;
-#ifdef AZT_DEBUG
-			if (ms.addr_format == CDROM_MSF)
-				printk
-				    ("aztcd multisession xa:%d, msf:%02x:%02x.%02x [%02x:%02x.%02x])\n",
-				     ms.xa_flag, ms.addr.msf.minute,
-				     ms.addr.msf.second, ms.addr.msf.frame,
-				     DiskInfo.lastSession.min,
-				     DiskInfo.lastSession.sec,
-				     DiskInfo.lastSession.frame);
-			else
-				printk
-				    ("aztcd multisession %d, lba:0x%08x [%02x:%02x.%02x])\n",
-				     ms.xa_flag, ms.addr.lba,
-				     DiskInfo.lastSession.min,
-				     DiskInfo.lastSession.sec,
-				     DiskInfo.lastSession.frame);
-#endif
-			return 0;
-		}
-	case CDROMPLAYTRKIND:	/* Play a track.  This currently ignores index. */
-		if (copy_from_user(&ti, argp, sizeof ti))
-			return -EFAULT;
-		if (ti.cdti_trk0 < DiskInfo.first
-		    || ti.cdti_trk0 > DiskInfo.last
-		    || ti.cdti_trk1 < ti.cdti_trk0) {
-			return -EINVAL;
-		}
-		if (ti.cdti_trk1 > DiskInfo.last)
-			ti.cdti_trk1 = DiskInfo.last;
-		azt_Play.start = Toc[ti.cdti_trk0].diskTime;
-		azt_Play.end = Toc[ti.cdti_trk1 + 1].diskTime;
-#ifdef AZT_DEBUG
-		printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
-		       azt_Play.start.min, azt_Play.start.sec,
-		       azt_Play.start.frame, azt_Play.end.min,
-		       azt_Play.end.sec, azt_Play.end.frame);
-#endif
-		i = aztPlay(&azt_Play);
-		if (i < 0) {
-			aztAudioStatus = CDROM_AUDIO_ERROR;
-			return -EIO;
-		}
-		aztAudioStatus = CDROM_AUDIO_PLAY;
-		break;
-	case CDROMPLAYMSF:	/* Play starting at the given MSF address. */
-/*              if (aztAudioStatus == CDROM_AUDIO_PLAY) 
-		{ if (aztSendCmd(ACMD_STOP)) RETURNM("aztcd_ioctl 9",-1);
-		  STEN_LOW;
-		  aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-		}
-*/
-		if (copy_from_user(&msf, argp, sizeof msf))
-			return -EFAULT;
-		/* convert to bcd */
-		azt_bin2bcd(&msf.cdmsf_min0);
-		azt_bin2bcd(&msf.cdmsf_sec0);
-		azt_bin2bcd(&msf.cdmsf_frame0);
-		azt_bin2bcd(&msf.cdmsf_min1);
-		azt_bin2bcd(&msf.cdmsf_sec1);
-		azt_bin2bcd(&msf.cdmsf_frame1);
-		azt_Play.start.min = msf.cdmsf_min0;
-		azt_Play.start.sec = msf.cdmsf_sec0;
-		azt_Play.start.frame = msf.cdmsf_frame0;
-		azt_Play.end.min = msf.cdmsf_min1;
-		azt_Play.end.sec = msf.cdmsf_sec1;
-		azt_Play.end.frame = msf.cdmsf_frame1;
-#ifdef AZT_DEBUG
-		printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n",
-		       azt_Play.start.min, azt_Play.start.sec,
-		       azt_Play.start.frame, azt_Play.end.min,
-		       azt_Play.end.sec, azt_Play.end.frame);
-#endif
-		i = aztPlay(&azt_Play);
-		if (i < 0) {
-			aztAudioStatus = CDROM_AUDIO_ERROR;
-			return -EIO;
-		}
-		aztAudioStatus = CDROM_AUDIO_PLAY;
-		break;
-
-	case CDROMREADTOCHDR:	/* Read the table of contents header */
-		tocHdr.cdth_trk0 = DiskInfo.first;
-		tocHdr.cdth_trk1 = DiskInfo.last;
-		if (copy_to_user(argp, &tocHdr, sizeof tocHdr))
-			return -EFAULT;
-		break;
-	case CDROMREADTOCENTRY:	/* Read an entry in the table of contents */
-		if (copy_from_user(&entry, argp, sizeof entry))
-			return -EFAULT;
-		if ((!aztTocUpToDate) || aztDiskChanged)
-			aztUpdateToc();
-		if (entry.cdte_track == CDROM_LEADOUT)
-			tocPtr = &Toc[DiskInfo.last + 1];
-		else if (entry.cdte_track > DiskInfo.last
-			 || entry.cdte_track < DiskInfo.first) {
-			return -EINVAL;
-		} else
-			tocPtr = &Toc[entry.cdte_track];
-		entry.cdte_adr = tocPtr->ctrl_addr;
-		entry.cdte_ctrl = tocPtr->ctrl_addr >> 4;
-		if (entry.cdte_format == CDROM_LBA)
-			entry.cdte_addr.lba =
-			    azt_msf2hsg(&tocPtr->diskTime);
-		else if (entry.cdte_format == CDROM_MSF) {
-			entry.cdte_addr.msf.minute =
-			    azt_bcd2bin(tocPtr->diskTime.min);
-			entry.cdte_addr.msf.second =
-			    azt_bcd2bin(tocPtr->diskTime.sec);
-			entry.cdte_addr.msf.frame =
-			    azt_bcd2bin(tocPtr->diskTime.frame);
-		} else {
-			return -EINVAL;
-		}
-		if (copy_to_user(argp, &entry, sizeof entry))
-			return -EFAULT;
-		break;
-	case CDROMSUBCHNL:	/* Get subchannel info */
-		if (copy_from_user
-		    (&subchnl, argp, sizeof(struct cdrom_subchnl)))
-			return -EFAULT;
-		if (aztGetQChannelInfo(&qInfo) < 0) {
-#ifdef AZT_DEBUG
-			printk
-			    ("aztcd: exiting aztcd_ioctl - Error 3 - Command:%x\n",
-			     cmd);
-#endif
-			return -EIO;
-		}
-		subchnl.cdsc_audiostatus = aztAudioStatus;
-		subchnl.cdsc_adr = qInfo.ctrl_addr;
-		subchnl.cdsc_ctrl = qInfo.ctrl_addr >> 4;
-		subchnl.cdsc_trk = azt_bcd2bin(qInfo.track);
-		subchnl.cdsc_ind = azt_bcd2bin(qInfo.pointIndex);
-		if (subchnl.cdsc_format == CDROM_LBA) {
-			subchnl.cdsc_absaddr.lba =
-			    azt_msf2hsg(&qInfo.diskTime);
-			subchnl.cdsc_reladdr.lba =
-			    azt_msf2hsg(&qInfo.trackTime);
-		} else {	/*default */
-			subchnl.cdsc_format = CDROM_MSF;
-			subchnl.cdsc_absaddr.msf.minute =
-			    azt_bcd2bin(qInfo.diskTime.min);
-			subchnl.cdsc_absaddr.msf.second =
-			    azt_bcd2bin(qInfo.diskTime.sec);
-			subchnl.cdsc_absaddr.msf.frame =
-			    azt_bcd2bin(qInfo.diskTime.frame);
-			subchnl.cdsc_reladdr.msf.minute =
-			    azt_bcd2bin(qInfo.trackTime.min);
-			subchnl.cdsc_reladdr.msf.second =
-			    azt_bcd2bin(qInfo.trackTime.sec);
-			subchnl.cdsc_reladdr.msf.frame =
-			    azt_bcd2bin(qInfo.trackTime.frame);
-		}
-		if (copy_to_user(argp, &subchnl, sizeof(struct cdrom_subchnl)))
-			return -EFAULT;
-		break;
-	case CDROMVOLCTRL:	/* Volume control 
-				   * With my Aztech CD268-01A volume control does not work, I can only
-				   turn the channels on (any value !=0) or off (value==0). Maybe it
-				   works better with your drive */
-		if (copy_from_user(&volctrl, argp, sizeof(volctrl)))
-			return -EFAULT;
-		azt_Play.start.min = 0x21;
-		azt_Play.start.sec = 0x84;
-		azt_Play.start.frame = volctrl.channel0;
-		azt_Play.end.min = volctrl.channel1;
-		azt_Play.end.sec = volctrl.channel2;
-		azt_Play.end.frame = volctrl.channel3;
-		sendAztCmd(ACMD_SET_VOLUME, &azt_Play);
-		STEN_LOW_WAIT;
-		break;
-	case CDROMEJECT:
-		aztUnlockDoor();	/* Assume user knows what they're doing */
-		/* all drives can at least stop! */
-		if (aztAudioStatus == CDROM_AUDIO_PLAY) {
-			if (aztSendCmd(ACMD_STOP))
-				RETURNM("azt_ioctl 10", -1);
-			STEN_LOW_WAIT;
-		}
-		if (aztSendCmd(ACMD_EJECT))
-			RETURNM("azt_ioctl 11", -1);
-		STEN_LOW_WAIT;
-		aztAudioStatus = CDROM_AUDIO_NO_STATUS;
-		break;
-	case CDROMEJECT_SW:
-		azt_auto_eject = (char) arg;
-		break;
-	case CDROMRESET:
-		outb(ACMD_SOFT_RESET, CMD_PORT);	/*send reset */
-		STEN_LOW;
-		if (inb(DATA_PORT) != AFL_OP_OK) {	/*OP_OK? */
-			printk
-			    ("aztcd: AZTECH CD-ROM drive does not respond\n");
-		}
-		break;
-/*Take care, the following code is not compatible with other CD-ROM drivers,
-  use it at your own risk with cdplay.c. Set AZT_PRIVATE_IOCTLS to 0 in aztcd.h,
-  if you do not want to use it!
-*/
-#if AZT_PRIVATE_IOCTLS
-	case CDROMREADCOOKED:	/*read data in mode 1 (2048 Bytes) */
-	case CDROMREADRAW:	/*read data in mode 2 (2336 Bytes) */
-		{
-			if (copy_from_user(&msf, argp, sizeof msf))
-				return -EFAULT;
-			/* convert to bcd */
-			azt_bin2bcd(&msf.cdmsf_min0);
-			azt_bin2bcd(&msf.cdmsf_sec0);
-			azt_bin2bcd(&msf.cdmsf_frame0);
-			msf.cdmsf_min1 = 0;
-			msf.cdmsf_sec1 = 0;
-			msf.cdmsf_frame1 = 1;	/*read only one frame */
-			azt_Play.start.min = msf.cdmsf_min0;
-			azt_Play.start.sec = msf.cdmsf_sec0;
-			azt_Play.start.frame = msf.cdmsf_frame0;
-			azt_Play.end.min = msf.cdmsf_min1;
-			azt_Play.end.sec = msf.cdmsf_sec1;
-			azt_Play.end.frame = msf.cdmsf_frame1;
-			if (cmd == CDROMREADRAW) {
-				if (DiskInfo.xa) {
-					return -1;	/*XA Disks can't be read raw */
-				} else {
-					if (sendAztCmd(ACMD_PLAY_READ_RAW, &azt_Play))
-						return -1;
-					DTEN_LOW;
-					insb(DATA_PORT, buf, CD_FRAMESIZE_RAW);
-					if (copy_to_user(argp, &buf, CD_FRAMESIZE_RAW))
-						return -EFAULT;
-				}
-			} else
-				/*CDROMREADCOOKED*/ {
-				if (sendAztCmd(ACMD_PLAY_READ, &azt_Play))
-					return -1;
-				DTEN_LOW;
-				insb(DATA_PORT, buf, CD_FRAMESIZE);
-				if (copy_to_user(argp, &buf, CD_FRAMESIZE))
-					return -EFAULT;
-				}
-		}
-		break;
-	case CDROMSEEK:	/*seek msf address */
-		if (copy_from_user(&msf, argp, sizeof msf))
-			return -EFAULT;
-		/* convert to bcd */
-		azt_bin2bcd(&msf.cdmsf_min0);
-		azt_bin2bcd(&msf.cdmsf_sec0);
-		azt_bin2bcd(&msf.cdmsf_frame0);
-		azt_Play.start.min = msf.cdmsf_min0;
-		azt_Play.start.sec = msf.cdmsf_sec0;
-		azt_Play.start.frame = msf.cdmsf_frame0;
-		if (aztSeek(&azt_Play))
-			return -1;
-		break;
-#endif				/*end of incompatible code */
-	case CDROMREADMODE1:	/*set read data in mode 1 */
-		return aztSetDiskType(AZT_MODE_1);
-	case CDROMREADMODE2:	/*set read data in mode 2 */
-		return aztSetDiskType(AZT_MODE_2);
-	default:
-		return -EINVAL;
-	}
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztcd_ioctl Command:%x  Time:%li\n", cmd,
-	       jiffies);
-#endif
-	return 0;
-}
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-static void azt_transfer(void)
-{
-#ifdef AZT_TEST
-	printk("aztcd: executing azt_transfer Time:%li\n", jiffies);
-#endif
-	if (!current_valid())
-	        return;
-
-	while (CURRENT->nr_sectors) {
-		int bn = CURRENT->sector / 4;
-		int i;
-		for (i = 0; i < AZT_BUF_SIZ && azt_buf_bn[i] != bn; ++i);
-		if (i < AZT_BUF_SIZ) {
-			int offs = (i * 4 + (CURRENT->sector & 3)) * 512;
-			int nr_sectors = 4 - (CURRENT->sector & 3);
-			if (azt_buf_out != i) {
-				azt_buf_out = i;
-				if (azt_buf_bn[i] != bn) {
-					azt_buf_out = -1;
-					continue;
-				}
-			}
-			if (nr_sectors > CURRENT->nr_sectors)
-			    nr_sectors = CURRENT->nr_sectors;
-			memcpy(CURRENT->buffer, azt_buf + offs,
-				nr_sectors * 512);
-			CURRENT->nr_sectors -= nr_sectors;
-			CURRENT->sector += nr_sectors;
-			CURRENT->buffer += nr_sectors * 512;
-		} else {
-			azt_buf_out = -1;
-			break;
-		}
-	}
-}
-
-static void do_aztcd_request(request_queue_t * q)
-{
-#ifdef AZT_TEST
-	printk(" do_aztcd_request(%ld+%ld) Time:%li\n", CURRENT->sector,
-	       CURRENT->nr_sectors, jiffies);
-#endif
-	if (DiskInfo.audio) {
-		printk("aztcd: Error, tried to mount an Audio CD\n");
-		end_request(CURRENT, 0);
-		return;
-	}
-	azt_transfer_is_active = 1;
-	while (current_valid()) {
-		azt_transfer();
-		if (CURRENT->nr_sectors == 0) {
-			end_request(CURRENT, 1);
-		} else {
-			azt_buf_out = -1;	/* Want to read a block not in buffer */
-			if (azt_state == AZT_S_IDLE) {
-				if ((!aztTocUpToDate) || aztDiskChanged) {
-					if (aztUpdateToc() < 0) {
-						while (current_valid())
-							end_request(CURRENT, 0);
-						break;
-					}
-				}
-				azt_state = AZT_S_START;
-				AztTries = 5;
-				SET_TIMER(azt_poll, HZ / 100);
-			}
-			break;
-		}
-	}
-	azt_transfer_is_active = 0;
-#ifdef AZT_TEST2
-	printk
-	    ("azt_next_bn:%x  azt_buf_in:%x azt_buf_out:%x  azt_buf_bn:%x\n",
-	     azt_next_bn, azt_buf_in, azt_buf_out, azt_buf_bn[azt_buf_in]);
-	printk(" do_aztcd_request ends  Time:%li\n", jiffies);
-#endif
-}
-
-
-static void azt_invalidate_buffers(void)
-{
-	int i;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: executing azt_invalidate_buffers\n");
-#endif
-	for (i = 0; i < AZT_BUF_SIZ; ++i)
-		azt_buf_bn[i] = -1;
-	azt_buf_out = -1;
-}
-
-/*
- * Open the device special file.  Check that a disk is in.
- */
-static int aztcd_open(struct inode *ip, struct file *fp)
-{
-	int st;
-
-#ifdef AZT_DEBUG
-	printk("aztcd: starting aztcd_open\n");
-#endif
-
-	if (aztPresent == 0)
-		return -ENXIO;	/* no hardware */
-
-	if (!azt_open_count && azt_state == AZT_S_IDLE) {
-		azt_invalidate_buffers();
-
-		st = getAztStatus();	/* check drive status */
-		if (st == -1)
-			goto err_out;	/* drive doesn't respond */
-
-		if (st & AST_DOOR_OPEN) {	/* close door, then get the status again. */
-			printk("aztcd: Door Open?\n");
-			aztCloseDoor();
-			st = getAztStatus();
-		}
-
-		if ((st & AST_NOT_READY) || (st & AST_DSK_CHG)) {	/*no disk in drive or changed */
-			printk
-			    ("aztcd: Disk Changed or No Disk in Drive?\n");
-			aztTocUpToDate = 0;
-		}
-		if (aztUpdateToc())
-			goto err_out;
-
-	}
-	++azt_open_count;
-	aztLockDoor();
-
-#ifdef AZT_DEBUG
-	printk("aztcd: exiting aztcd_open\n");
-#endif
-	return 0;
-
-      err_out:
-	return -EIO;
-}
-
-
-/*
- * On close, we flush all azt blocks from the buffer cache.
- */
-static int aztcd_release(struct inode *inode, struct file *file)
-{
-#ifdef AZT_DEBUG
-	printk("aztcd: executing aztcd_release\n");
-	printk("inode: %p, device: %s    file: %p\n", inode,
-	       inode->i_bdev->bd_disk->disk_name, file);
-#endif
-	if (!--azt_open_count) {
-		azt_invalidate_buffers();
-		aztUnlockDoor();
-		if (azt_auto_eject)
-			aztSendCmd(ACMD_EJECT);
-		CLEAR_TIMER;
-	}
-	return 0;
-}
-
-static struct gendisk *azt_disk;
-
-/*
- * Test for presence of drive and initialize it.  Called at boot time.
- */
-
-static int __init aztcd_init(void)
-{
-	long int count, max_count;
-	unsigned char result[50];
-	int st;
-	void* status = NULL;
-	int i = 0;
-	int ret = 0;
-
-	if (azt_port == 0) {
-		printk(KERN_INFO "aztcd: no Aztech CD-ROM Initialization");
-		return -EIO;
-	}
-
-	printk(KERN_INFO "aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM "
-	       "CD-ROM Driver\n");
-	printk(KERN_INFO "aztcd: (C) 1994-98 W.Zimmermann\n");
-	if (azt_port == -1) {
-		printk
-		    ("aztcd: DriverVersion=%s For IDE/ATAPI-drives use ide-cd.c\n",
-		     AZT_VERSION);
-	} else
-		printk
-		    ("aztcd: DriverVersion=%s BaseAddress=0x%x  For IDE/ATAPI-drives use ide-cd.c\n",
-		     AZT_VERSION, azt_port);
-	printk(KERN_INFO "aztcd: If you have problems, read /usr/src/linux/"
-	       "Documentation/cdrom/aztcd\n");
-
-
-#ifdef AZT_SW32			/*CDROM connected to Soundwave32 card */
-	if ((0xFF00 & inw(AZT_SW32_ID_REG)) != 0x4500) {
-		printk
-		    ("aztcd: no Soundwave32 card detected at base:%x init:%x config:%x id:%x\n",
-		     AZT_SW32_BASE_ADDR, AZT_SW32_INIT,
-		     AZT_SW32_CONFIG_REG, AZT_SW32_ID_REG);
-		return -EIO;
-	} else {
-		printk(KERN_INFO
-		       "aztcd: Soundwave32 card detected at %x  Version %x\n",
-		       AZT_SW32_BASE_ADDR, inw(AZT_SW32_ID_REG));
-		outw(AZT_SW32_INIT, AZT_SW32_CONFIG_REG);
-		for (count = 0; count < 10000; count++);	/*delay a bit */
-	}
-#endif
-
-	/* check for presence of drive */
-
-	if (azt_port == -1) {	/* autoprobing for proprietary interface  */
-		for (i = 0; (azt_port_auto[i] != 0) && (i < 16); i++) {
-			azt_port = azt_port_auto[i];
-			printk(KERN_INFO "aztcd: Autoprobing BaseAddress=0x%x"
-			       "\n", azt_port);
-			 /*proprietary interfaces need 4 bytes */
-			if (!request_region(azt_port, 4, "aztcd")) {
-				continue;
-			}
-			outb(POLLED, MODE_PORT);
-			inb(CMD_PORT);
-			inb(CMD_PORT);
-			outb(ACMD_GET_VERSION, CMD_PORT);	/*Try to get version info */
-
-			aztTimeOutCount = 0;
-			do {
-				aztIndatum = inb(STATUS_PORT);
-				aztTimeOutCount++;
-				if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-					break;
-			} while (aztIndatum & AFL_STATUS);
-			if (inb(DATA_PORT) == AFL_OP_OK) { /* OK drive found */
-				break;
-			}
-			else {  /* Drive not found on this port - try next one */
-				release_region(azt_port, 4);
-			}
-		}
-		if ((i == 16) || (azt_port_auto[i] == 0)) {
-			printk(KERN_INFO "aztcd: no AZTECH CD-ROM drive found\n");
-			return -EIO;
-		}
-	} else {		/* no autoprobing */
-		if ((azt_port == 0x1f0) || (azt_port == 0x170))
-			status = request_region(azt_port, 8, "aztcd");	/*IDE-interfaces need 8 bytes */
-		else
-			status = request_region(azt_port, 4, "aztcd");	/*proprietary interfaces need 4 bytes */
-		if (!status) {
-			printk(KERN_WARNING "aztcd: conflict, I/O port (%X) "
-			       "already used\n", azt_port);
-			return -EIO;
-		}
-
-		if ((azt_port == 0x1f0) || (azt_port == 0x170))
-			SWITCH_IDE_SLAVE;	/*switch IDE interface to slave configuration */
-
-		outb(POLLED, MODE_PORT);
-		inb(CMD_PORT);
-		inb(CMD_PORT);
-		outb(ACMD_GET_VERSION, CMD_PORT);	/*Try to get version info */
-
-		aztTimeOutCount = 0;
-		do {
-			aztIndatum = inb(STATUS_PORT);
-			aztTimeOutCount++;
-			if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-				break;
-		} while (aztIndatum & AFL_STATUS);
-
-		if (inb(DATA_PORT) != AFL_OP_OK) {	/*OP_OK? If not, reset and try again */
-#ifndef MODULE
-			if (azt_cont != 0x79) {
-				printk(KERN_WARNING "aztcd: no AZTECH CD-ROM "
-				       "drive found-Try boot parameter aztcd="
-				       "<BaseAddress>,0x79\n");
-				ret = -EIO;
-				goto err_out;
-			}
-#else
-			if (0) {
-			}
-#endif
-			else {
-				printk(KERN_INFO "aztcd: drive reset - "
-				       "please wait\n");
-				for (count = 0; count < 50; count++) {
-					inb(STATUS_PORT);	/*removing all data from earlier tries */
-					inb(DATA_PORT);
-				}
-				outb(POLLED, MODE_PORT);
-				inb(CMD_PORT);
-				inb(CMD_PORT);
-				getAztStatus();	/*trap errors */
-				outb(ACMD_SOFT_RESET, CMD_PORT);	/*send reset */
-				STEN_LOW;
-				if (inb(DATA_PORT) != AFL_OP_OK) {	/*OP_OK? */
-					printk(KERN_WARNING "aztcd: no AZTECH "
-					       "CD-ROM drive found\n");
-					ret = -EIO;
-					goto err_out;
-				}
-
-				for (count = 0; count < AZT_TIMEOUT;
-				     count++)
-					barrier();	/* Stop gcc 2.96 being smart */
-				/* use udelay(), damnit -- AV */
-
-				if ((st = getAztStatus()) == -1) {
-					printk(KERN_WARNING "aztcd: Drive Status"
-					       " Error Status=%x\n", st);
-					ret = -EIO;
-					goto err_out;
-				}
-#ifdef AZT_DEBUG
-				printk(KERN_DEBUG "aztcd: Status = %x\n", st);
-#endif
-				outb(POLLED, MODE_PORT);
-				inb(CMD_PORT);
-				inb(CMD_PORT);
-				outb(ACMD_GET_VERSION, CMD_PORT);	/*GetVersion */
-				STEN_LOW;
-				OP_OK;
-			}
-		}
-	}
-
-	azt_init_end = 1;
-	STEN_LOW;
-	result[0] = inb(DATA_PORT);	/*reading in a null byte??? */
-	for (count = 1; count < 50; count++) {	/*Reading version string */
-		aztTimeOutCount = 0;	/*here we must implement STEN_LOW differently */
-		do {
-			aztIndatum = inb(STATUS_PORT);	/*because we want to exit by timeout */
-			aztTimeOutCount++;
-			if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-				break;
-		} while (aztIndatum & AFL_STATUS);
-		if (aztTimeOutCount >= AZT_FAST_TIMEOUT)
-			break;	/*all chars read? */
-		result[count] = inb(DATA_PORT);
-	}
-	if (count > 30)
-		max_count = 30;	/*print max.30 chars of the version string */
-	else
-		max_count = count;
-	printk(KERN_INFO "aztcd: FirmwareVersion=");
-	for (count = 1; count < max_count; count++)
-		printk("%c", result[count]);
-	printk("<<>> ");
-
-	if ((result[1] == 'A') && (result[2] == 'Z') && (result[3] == 'T')) {
-		printk("AZTECH drive detected\n");
-	/*AZTECH*/}
-		else if ((result[2] == 'C') && (result[3] == 'D')
-			 && (result[4] == 'D')) {
-		printk("ORCHID or WEARNES drive detected\n");	/*ORCHID or WEARNES */
-	} else if ((result[1] == 0x03) && (result[2] == '5')) {
-		printk("TXC or CyCDROM drive detected\n");	/*Conrad TXC, CyCDROM */
-	} else {		/*OTHERS or none */
-		printk("\nunknown drive or firmware version detected\n");
-		printk
-		    ("aztcd may not run stable, if you want to try anyhow,\n");
-		printk("boot with: aztcd=<BaseAddress>,0x79\n");
-		if ((azt_cont != 0x79)) {
-			printk("aztcd: FirmwareVersion=");
-			for (count = 1; count < 5; count++)
-				printk("%c", result[count]);
-			printk("<<>> ");
-			printk("Aborted\n");
-			ret = -EIO;
-			goto err_out;
-		}
-	}
-	azt_disk = alloc_disk(1);
-	if (!azt_disk)
-		goto err_out;
-
-	if (register_blkdev(MAJOR_NR, "aztcd")) {
-		ret = -EIO;
-		goto err_out2;
-	}
-
-	azt_queue = blk_init_queue(do_aztcd_request, &aztSpin);
-	if (!azt_queue) {
-		ret = -ENOMEM;
-		goto err_out3;
-	}
-
-	blk_queue_hardsect_size(azt_queue, 2048);
-	azt_disk->major = MAJOR_NR;
-	azt_disk->first_minor = 0;
-	azt_disk->fops = &azt_fops;
-	sprintf(azt_disk->disk_name, "aztcd");
-	azt_disk->queue = azt_queue;
-	add_disk(azt_disk);
-	azt_invalidate_buffers();
-	aztPresent = 1;
-	aztCloseDoor();
-	return 0;
-err_out3:
-	unregister_blkdev(MAJOR_NR, "aztcd");
-err_out2:
-	put_disk(azt_disk);
-err_out:
-	if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
-		SWITCH_IDE_MASTER;
-		release_region(azt_port, 8);	/*IDE-interface */
-	} else
-		release_region(azt_port, 4);	/*proprietary interface */
-	return ret;
-
-}
-
-static void __exit aztcd_exit(void)
-{
-	del_gendisk(azt_disk);
-	put_disk(azt_disk);
-	if ((unregister_blkdev(MAJOR_NR, "aztcd") == -EINVAL)) {
-		printk("What's that: can't unregister aztcd\n");
-		return;
-	}
-	blk_cleanup_queue(azt_queue);
-	if ((azt_port == 0x1f0) || (azt_port == 0x170)) {
-		SWITCH_IDE_MASTER;
-		release_region(azt_port, 8);	/*IDE-interface */
-	} else
-		release_region(azt_port, 4);	/*proprietary interface */
-	printk(KERN_INFO "aztcd module released.\n");
-}
-
-module_init(aztcd_init);
-module_exit(aztcd_exit);
-
-/*##########################################################################
-  Aztcd State Machine: Controls Drive Operating State
-  ##########################################################################
-*/
-static void azt_poll(void)
-{
-	int st = 0;
-	int loop_ctl = 1;
-	int skip = 0;
-
-	if (azt_error) {
-		if (aztSendCmd(ACMD_GET_ERROR))
-			RETURN("azt_poll 1");
-		STEN_LOW;
-		azt_error = inb(DATA_PORT) & 0xFF;
-		printk("aztcd: I/O error 0x%02x\n", azt_error);
-		azt_invalidate_buffers();
-#ifdef WARN_IF_READ_FAILURE
-		if (AztTries == 5)
-			printk
-			    ("aztcd: Read of Block %d Failed - Maybe Audio Disk?\n",
-			     azt_next_bn);
-#endif
-		if (!AztTries--) {
-			printk
-			    ("aztcd: Read of Block %d Failed, Maybe Audio Disk? Giving up\n",
-			     azt_next_bn);
-			if (azt_transfer_is_active) {
-				AztTries = 0;
-				loop_ctl = 0;
-			}
-			if (current_valid())
-				end_request(CURRENT, 0);
-			AztTries = 5;
-		}
-		azt_error = 0;
-		azt_state = AZT_S_STOP;
-	}
-
-	while (loop_ctl) {
-		loop_ctl = 0;	/* each case must flip this back to 1 if we want
-				   to come back up here */
-		switch (azt_state) {
-
-		case AZT_S_IDLE:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_IDLE\n");
-			}
-#endif
-			return;
-
-		case AZT_S_START:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_START\n");
-			}
-#endif
-			if (aztSendCmd(ACMD_GET_STATUS))
-				RETURN("azt_poll 2");	/*result will be checked by aztStatus() */
-			azt_state =
-			    azt_mode == 1 ? AZT_S_READ : AZT_S_MODE;
-			AztTimeout = 3000;
-			break;
-
-		case AZT_S_MODE:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_MODE\n");
-			}
-#endif
-			if (!skip) {
-				if ((st = aztStatus()) != -1) {
-					if ((st & AST_DSK_CHG)
-					    || (st & AST_NOT_READY)) {
-						aztDiskChanged = 1;
-						aztTocUpToDate = 0;
-						azt_invalidate_buffers();
-						end_request(CURRENT, 0);
-						printk
-						    ("aztcd: Disk Changed or Not Ready 1 - Unmount Disk!\n");
-					}
-				} else
-					break;
-			}
-			skip = 0;
-
-			if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
-				aztDiskChanged = 1;
-				aztTocUpToDate = 0;
-				printk
-				    ("aztcd: Disk Changed or Not Ready 2 - Unmount Disk!\n");
-				end_request(CURRENT, 0);
-				printk((st & AST_DOOR_OPEN) ?
-				       "aztcd: door open\n" :
-				       "aztcd: disk removed\n");
-				if (azt_transfer_is_active) {
-					azt_state = AZT_S_START;
-					loop_ctl = 1;	/* goto immediately */
-					break;
-				}
-				azt_state = AZT_S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-
-/*	  if (aztSendCmd(ACMD_SET_MODE)) RETURN("azt_poll 3");
-	  outb(0x01, DATA_PORT);
-	  PA_OK;
-	  STEN_LOW;
-*/
-			if (aztSendCmd(ACMD_GET_STATUS))
-				RETURN("azt_poll 4");
-			STEN_LOW;
-			azt_mode = 1;
-			azt_state = AZT_S_READ;
-			AztTimeout = 3000;
-
-			break;
-
-
-		case AZT_S_READ:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_READ\n");
-			}
-#endif
-			if (!skip) {
-				if ((st = aztStatus()) != -1) {
-					if ((st & AST_DSK_CHG)
-					    || (st & AST_NOT_READY)) {
-						aztDiskChanged = 1;
-						aztTocUpToDate = 0;
-						azt_invalidate_buffers();
-						printk
-						    ("aztcd: Disk Changed or Not Ready 3 - Unmount Disk!\n");
-						end_request(CURRENT, 0);
-					}
-				} else
-					break;
-			}
-
-			skip = 0;
-			if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) {
-				aztDiskChanged = 1;
-				aztTocUpToDate = 0;
-				printk((st & AST_DOOR_OPEN) ?
-				       "aztcd: door open\n" :
-				       "aztcd: disk removed\n");
-				if (azt_transfer_is_active) {
-					azt_state = AZT_S_START;
-					loop_ctl = 1;
-					break;
-				}
-				azt_state = AZT_S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-
-			if (current_valid()) {
-				struct azt_Play_msf msf;
-				int i;
-				azt_next_bn = CURRENT->sector / 4;
-				azt_hsg2msf(azt_next_bn, &msf.start);
-				i = 0;
-				/* find out in which track we are */
-				while (azt_msf2hsg(&msf.start) >
-				       azt_msf2hsg(&Toc[++i].trackTime)) {
-				};
-				if (azt_msf2hsg(&msf.start) <
-				    azt_msf2hsg(&Toc[i].trackTime) -
-				    AZT_BUF_SIZ) {
-					azt_read_count = AZT_BUF_SIZ;	/*fast, because we read ahead */
-					/*azt_read_count=CURRENT->nr_sectors;    slow, no read ahead */
-				} else	/* don't read beyond end of track */
-#if AZT_MULTISESSION
-				{
-					azt_read_count =
-					    (azt_msf2hsg(&Toc[i].trackTime)
-					     / 4) * 4 -
-					    azt_msf2hsg(&msf.start);
-					if (azt_read_count < 0)
-						azt_read_count = 0;
-					if (azt_read_count > AZT_BUF_SIZ)
-						azt_read_count =
-						    AZT_BUF_SIZ;
-					printk
-					    ("aztcd: warning - trying to read beyond end of track\n");
-/*               printk("%i %i %li %li\n",i,azt_read_count,azt_msf2hsg(&msf.start),azt_msf2hsg(&Toc[i].trackTime));
-*/ }
-#else
-				{
-					azt_read_count = AZT_BUF_SIZ;
-				}
-#endif
-				msf.end.min = 0;
-				msf.end.sec = 0;
-				msf.end.frame = azt_read_count;	/*Mitsumi here reads 0xffffff sectors */
-#ifdef AZT_TEST3
-				printk
-				    ("---reading msf-address %x:%x:%x  %x:%x:%x\n",
-				     msf.start.min, msf.start.sec,
-				     msf.start.frame, msf.end.min,
-				     msf.end.sec, msf.end.frame);
-				printk
-				    ("azt_next_bn:%x  azt_buf_in:%x azt_buf_out:%x  azt_buf_bn:%x\n",
-				     azt_next_bn, azt_buf_in, azt_buf_out,
-				     azt_buf_bn[azt_buf_in]);
-#endif
-				if (azt_read_mode == AZT_MODE_2) {
-					sendAztCmd(ACMD_PLAY_READ_RAW, &msf);	/*XA disks in raw mode */
-				} else {
-					sendAztCmd(ACMD_PLAY_READ, &msf);	/*others in cooked mode */
-				}
-				azt_state = AZT_S_DATA;
-				AztTimeout = READ_TIMEOUT;
-			} else {
-				azt_state = AZT_S_STOP;
-				loop_ctl = 1;
-				break;
-			}
-
-			break;
-
-
-		case AZT_S_DATA:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_DATA\n");
-			}
-#endif
-
-			st = inb(STATUS_PORT) & AFL_STATUSorDATA;
-
-			switch (st) {
-
-			case AFL_DATA:
-#ifdef AZT_TEST3
-				if (st != azt_st_old) {
-					azt_st_old = st;
-					printk("---AFL_DATA st:%x\n", st);
-				}
-#endif
-				if (!AztTries--) {
-					printk
-					    ("aztcd: Read of Block %d Failed, Maybe Audio Disk ? Giving up\n",
-					     azt_next_bn);
-					if (azt_transfer_is_active) {
-						AztTries = 0;
-						break;
-					}
-					if (current_valid())
-						end_request(CURRENT, 0);
-					AztTries = 5;
-				}
-				azt_state = AZT_S_START;
-				AztTimeout = READ_TIMEOUT;
-				loop_ctl = 1;
-				break;
-
-			case AFL_STATUSorDATA:
-#ifdef AZT_TEST3
-				if (st != azt_st_old) {
-					azt_st_old = st;
-					printk
-					    ("---AFL_STATUSorDATA st:%x\n",
-					     st);
-				}
-#endif
-				break;
-
-			default:
-#ifdef AZT_TEST3
-				if (st != azt_st_old) {
-					azt_st_old = st;
-					printk("---default: st:%x\n", st);
-				}
-#endif
-				AztTries = 5;
-				if (!current_valid() && azt_buf_in == azt_buf_out) {
-					azt_state = AZT_S_STOP;
-					loop_ctl = 1;
-					break;
-				}
-				if (azt_read_count <= 0)
-					printk
-					    ("aztcd: warning - try to read 0 frames\n");
-				while (azt_read_count) {	/*??? fast read ahead loop */
-					azt_buf_bn[azt_buf_in] = -1;
-					DTEN_LOW;	/*??? unsolved problem, very
-							   seldom we get timeouts
-							   here, don't now the real
-							   reason. With my drive this
-							   sometimes also happens with
-							   Aztech's original driver under
-							   DOS. Is it a hardware bug? 
-							   I tried to recover from such
-							   situations here. Zimmermann */
-					if (aztTimeOutCount >= AZT_TIMEOUT) {
-						printk
-						    ("read_count:%d CURRENT->nr_sectors:%ld azt_buf_in:%d\n",
-						     azt_read_count,
-						     CURRENT->nr_sectors,
-						     azt_buf_in);
-						printk
-						    ("azt_transfer_is_active:%x\n",
-						     azt_transfer_is_active);
-						azt_read_count = 0;
-						azt_state = AZT_S_STOP;
-						loop_ctl = 1;
-						end_request(CURRENT, 1);	/*should we have here (1) or (0)? */
-					} else {
-						if (azt_read_mode ==
-						    AZT_MODE_2) {
-							insb(DATA_PORT,
-							     azt_buf +
-							     CD_FRAMESIZE_RAW
-							     * azt_buf_in,
-							     CD_FRAMESIZE_RAW);
-						} else {
-							insb(DATA_PORT,
-							     azt_buf +
-							     CD_FRAMESIZE *
-							     azt_buf_in,
-							     CD_FRAMESIZE);
-						}
-						azt_read_count--;
-#ifdef AZT_TEST3
-						printk
-						    ("AZT_S_DATA; ---I've read data- read_count: %d\n",
-						     azt_read_count);
-						printk
-						    ("azt_next_bn:%d  azt_buf_in:%d azt_buf_out:%d  azt_buf_bn:%d\n",
-						     azt_next_bn,
-						     azt_buf_in,
-						     azt_buf_out,
-						     azt_buf_bn
-						     [azt_buf_in]);
-#endif
-						azt_buf_bn[azt_buf_in] =
-						    azt_next_bn++;
-						if (azt_buf_out == -1)
-							azt_buf_out =
-							    azt_buf_in;
-						azt_buf_in =
-						    azt_buf_in + 1 ==
-						    AZT_BUF_SIZ ? 0 :
-						    azt_buf_in + 1;
-					}
-				}
-				if (!azt_transfer_is_active) {
-					while (current_valid()) {
-						azt_transfer();
-						if (CURRENT->nr_sectors ==
-						    0)
-							end_request(CURRENT, 1);
-						else
-							break;
-					}
-				}
-
-				if (current_valid()
-				    && (CURRENT->sector / 4 < azt_next_bn
-					|| CURRENT->sector / 4 >
-					azt_next_bn + AZT_BUF_SIZ)) {
-					azt_state = AZT_S_STOP;
-					loop_ctl = 1;
-					break;
-				}
-				AztTimeout = READ_TIMEOUT;
-				if (azt_read_count == 0) {
-					azt_state = AZT_S_STOP;
-					loop_ctl = 1;
-					break;
-				}
-				break;
-			}
-			break;
-
-
-		case AZT_S_STOP:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_STOP\n");
-			}
-#endif
-			if (azt_read_count != 0)
-				printk("aztcd: discard data=%x frames\n",
-				       azt_read_count);
-			while (azt_read_count != 0) {
-				int i;
-				if (!(inb(STATUS_PORT) & AFL_DATA)) {
-					if (azt_read_mode == AZT_MODE_2)
-						for (i = 0;
-						     i < CD_FRAMESIZE_RAW;
-						     i++)
-							inb(DATA_PORT);
-					else
-						for (i = 0;
-						     i < CD_FRAMESIZE; i++)
-							inb(DATA_PORT);
-				}
-				azt_read_count--;
-			}
-			if (aztSendCmd(ACMD_GET_STATUS))
-				RETURN("azt_poll 5");
-			azt_state = AZT_S_STOPPING;
-			AztTimeout = 1000;
-			break;
-
-		case AZT_S_STOPPING:
-#ifdef AZT_TEST3
-			if (azt_state != azt_state_old) {
-				azt_state_old = azt_state;
-				printk("AZT_S_STOPPING\n");
-			}
-#endif
-
-			if ((st = aztStatus()) == -1 && AztTimeout)
-				break;
-
-			if ((st != -1)
-			    && ((st & AST_DSK_CHG)
-				|| (st & AST_NOT_READY))) {
-				aztDiskChanged = 1;
-				aztTocUpToDate = 0;
-				azt_invalidate_buffers();
-				printk
-				    ("aztcd: Disk Changed or Not Ready 4 - Unmount Disk!\n");
-				end_request(CURRENT, 0);
-			}
-
-#ifdef AZT_TEST3
-			printk("CURRENT_VALID %d azt_mode %d\n",
-			       current_valid(), azt_mode);
-#endif
-
-			if (current_valid()) {
-				if (st != -1) {
-					if (azt_mode == 1) {
-						azt_state = AZT_S_READ;
-						loop_ctl = 1;
-						skip = 1;
-						break;
-					} else {
-						azt_state = AZT_S_MODE;
-						loop_ctl = 1;
-						skip = 1;
-						break;
-					}
-				} else {
-					azt_state = AZT_S_START;
-					AztTimeout = 1;
-				}
-			} else {
-				azt_state = AZT_S_IDLE;
-				return;
-			}
-			break;
-
-		default:
-			printk("aztcd: invalid state %d\n", azt_state);
-			return;
-		}		/* case */
-	}			/* while */
-
-
-	if (!AztTimeout--) {
-		printk("aztcd: timeout in state %d\n", azt_state);
-		azt_state = AZT_S_STOP;
-		if (aztSendCmd(ACMD_STOP))
-			RETURN("azt_poll 6");
-		STEN_LOW_WAIT;
-	};
-
-	SET_TIMER(azt_poll, HZ / 100);
-}
-
-
-/*###########################################################################
- * Miscellaneous support functions
-  ###########################################################################
-*/
-static void azt_hsg2msf(long hsg, struct msf *msf)
-{
-	hsg += 150;
-	msf->min = hsg / 4500;
-	hsg %= 4500;
-	msf->sec = hsg / 75;
-	msf->frame = hsg % 75;
-#ifdef AZT_DEBUG
-	if (msf->min >= 70)
-		printk("aztcd: Error hsg2msf address Minutes\n");
-	if (msf->sec >= 60)
-		printk("aztcd: Error hsg2msf address Seconds\n");
-	if (msf->frame >= 75)
-		printk("aztcd: Error hsg2msf address Frames\n");
-#endif
-	azt_bin2bcd(&msf->min);	/* convert to BCD */
-	azt_bin2bcd(&msf->sec);
-	azt_bin2bcd(&msf->frame);
-}
-
-static long azt_msf2hsg(struct msf *mp)
-{
-	return azt_bcd2bin(mp->frame) + azt_bcd2bin(mp->sec) * 75
-	    + azt_bcd2bin(mp->min) * 4500 - CD_MSF_OFFSET;
-}
-
-static void azt_bin2bcd(unsigned char *p)
-{
-	int u, t;
-
-	u = *p % 10;
-	t = *p / 10;
-	*p = u | (t << 4);
-}
-
-static int azt_bcd2bin(unsigned char bcd)
-{
-	return (bcd >> 4) * 10 + (bcd & 0xF);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(AZTECH_CDROM_MAJOR);
diff --git a/drivers/cdrom/aztcd.h b/drivers/cdrom/aztcd.h
deleted file mode 100644
index 057501e31628..000000000000
--- a/drivers/cdrom/aztcd.h
+++ /dev/null
@@ -1,162 +0,0 @@
-/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $
- *
- * Definitions for a AztechCD268 CD-ROM interface
- *	Copyright (C) 1994-98  Werner Zimmermann
- *
- *	based on Mitsumi CDROM driver by Martin Harriss
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History:	W.Zimmermann adaption to Aztech CD268-01A Version 1.3
- *		October 1994 Email: Werner.Zimmermann@fht-esslingen.de
- */
-
-/* *** change this to set the I/O port address of your CD-ROM drive,
-       set to '-1', if you want autoprobing */
-#define AZT_BASE_ADDR		-1
-
-/* list of autoprobing addresses (not more than 15), last value must be 0x000
-   Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */
-#define AZT_BASE_AUTO 		{ 0x320, 0x300, 0x310, 0x330, 0x000 }
-
-/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard
-   and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */
-/*#define AZT_SW32 1
-*/
-
-#ifdef AZT_SW32 
-#define AZT_SW32_BASE_ADDR      0x220  /*I/O port base address of your soundcard*/
-#endif
-
-/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray 
-   from locking */
-#define AZT_ALLOW_TRAY_LOCK	1
-
-/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you 
-  don't want the auto-eject feature*/
-#define AZT_AUTO_EJECT          0
-
-/*Set this to 1, if you want to use incompatible ioctls for reading in raw and
-  cooked mode */
-#define AZT_PRIVATE_IOCTLS      1
-
-/*Set this to 1, if you want multisession support by the ISO fs. Even if you set 
-  this value to '0' you can use multisession CDs. In that case the drive's firm-
-  ware will do the appropriate redirection automatically. The CD will then look
-  like a single session CD (but nevertheless all data may be read). Please read 
-  chapter '5.1 Multisession support' in README.aztcd for details. Normally it's 
-  uncritical to leave this setting untouched */
-#define AZT_MULTISESSION        1
-
-/*Uncomment this, if you are using a linux kernel version prior to 2.1.0 */
-/*#define AZT_KERNEL_PRIOR_2_1 */
-
-/*---------------------------------------------------------------------------*/
-/*-----nothing to be configured for normal applications below this line------*/
-
-
-/* Increase this if you get lots of timeouts; if you get kernel panic, replace
-   STEN_LOW_WAIT by STEN_LOW in the source code */
-#define AZT_STATUS_DELAY	400       /*for timer wait, STEN_LOW_WAIT*/
-#define AZT_TIMEOUT		8000000   /*for busy wait STEN_LOW, DTEN_LOW*/
-#define AZT_FAST_TIMEOUT	10000     /*for reading the version string*/
-
-/* number of times to retry a command before giving up */
-#define AZT_RETRY_ATTEMPTS	3
-
-/* port access macros */
-#define CMD_PORT		azt_port
-#define DATA_PORT		azt_port
-#define STATUS_PORT		azt_port+1
-#define MODE_PORT		azt_port+2
-#ifdef  AZT_SW32                
- #define AZT_SW32_INIT          (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16))
- #define AZT_SW32_CONFIG_REG    AZT_SW32_BASE_ADDR+0x16  /*Soundwave32 Config. Register*/
- #define AZT_SW32_ID_REG        AZT_SW32_BASE_ADDR+0x04  /*Soundwave32 ID Version Register*/
-#endif
-
-/* status bits */
-#define AST_CMD_CHECK		0x80		/* 1 = command error */
-#define AST_DOOR_OPEN		0x40		/* 1 = door is open */
-#define AST_NOT_READY		0x20		/* 1 = no disk in the drive */
-#define AST_DSK_CHG		0x02		/* 1 = disk removed or changed */
-#define AST_MODE                0x01            /* 0=MODE1, 1=MODE2 */
-#define AST_MODE_BITS		0x1C		/* Mode Bits */
-#define AST_INITIAL		0x0C		/* initial, only valid ... */
-#define AST_BUSY		0x04		/* now playing, only valid
-						   in combination with mode
-						   bits */
-/* flag bits */
-#define AFL_DATA		0x02		/* data available if low */
-#define AFL_STATUS		0x04		/* status available if low */
-#define AFL_OP_OK		0x01		/* OP_OK command correct*/
-#define AFL_PA_OK		0x02		/* PA_OK parameter correct*/
-#define AFL_OP_ERR		0x05		/* error in command*/
-#define AFL_PA_ERR		0x06		/* error in parameters*/
-#define POLLED			0x04		/* polled mode */
-
-/* commands */
-#define ACMD_SOFT_RESET		0x10		/* reset drive */
-#define ACMD_PLAY_READ		0x20		/* read data track in cooked mode */
-#define ACMD_PLAY_READ_RAW      0x21		/* reading in raw mode*/
-#define ACMD_SEEK               0x30            /* seek msf address*/
-#define ACMD_SEEK_TO_LEADIN     0x31		/* seek to leadin track*/
-#define ACMD_GET_ERROR		0x40		/* get error code */
-#define ACMD_GET_STATUS		0x41		/* get status */
-#define ACMD_GET_Q_CHANNEL      0x50		/* read info from q channel */
-#define ACMD_EJECT		0x60		/* eject/open tray */
-#define ACMD_CLOSE              0x61            /* close tray */
-#define ACMD_LOCK		0x71		/* lock tray closed */
-#define ACMD_UNLOCK		0x72		/* unlock tray */
-#define ACMD_PAUSE		0x80		/* pause */
-#define ACMD_STOP		0x81		/* stop play */
-#define ACMD_PLAY_AUDIO		0x90		/* play audio track */
-#define ACMD_SET_VOLUME		0x93		/* set audio level */
-#define ACMD_GET_VERSION	0xA0		/* get firmware version */
-#define ACMD_SET_DISK_TYPE	0xA1		/* set disk data mode */
-
-#define MAX_TRACKS		104
-
-struct msf {
-	unsigned char	min;
-	unsigned char	sec;
-	unsigned char	frame;
-};
-
-struct azt_Play_msf {
-	struct msf	start;
-	struct msf	end;
-};
-
-struct azt_DiskInfo {
-	unsigned char	first;
-        unsigned char   next;
-	unsigned char	last;
-	struct msf	diskLength;
-	struct msf	firstTrack;
-        unsigned char   multi;
-        struct msf      nextSession;
-        struct msf      lastSession;
-        unsigned char   xa;
-        unsigned char   audio;
-};
-
-struct azt_Toc {
-	unsigned char	ctrl_addr;
-	unsigned char	track;
-	unsigned char	pointIndex;
-	struct msf	trackTime;
-	struct msf	diskTime;
-};
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 3625a05bc3d3..aa5468f487ba 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -302,7 +302,7 @@ module_param(lockdoor, bool, 0);
 module_param(check_media_type, bool, 0);
 module_param(mrw_format_restart, bool, 0);
 
-static DEFINE_SPINLOCK(cdrom_lock);
+static DEFINE_MUTEX(cdrom_mutex);
 
 static const char *mrw_format_status[] = {
 	"not mrw",
@@ -438,10 +438,10 @@ int register_cdrom(struct cdrom_device_info *cdi)
 		cdo->generic_packet = cdrom_dummy_generic_packet;
 
 	cdinfo(CD_REG_UNREG, "drive \"/dev/%s\" registered\n", cdi->name);
-	spin_lock(&cdrom_lock);
+	mutex_lock(&cdrom_mutex);
 	cdi->next = topCdromPtr; 	
 	topCdromPtr = cdi;
-	spin_unlock(&cdrom_lock);
+	mutex_unlock(&cdrom_mutex);
 	return 0;
 }
 #undef ENSURE
@@ -452,7 +452,7 @@ int unregister_cdrom(struct cdrom_device_info *unreg)
 	cdinfo(CD_OPEN, "entering unregister_cdrom\n"); 
 
 	prev = NULL;
-	spin_lock(&cdrom_lock);
+	mutex_lock(&cdrom_mutex);
 	cdi = topCdromPtr;
 	while (cdi && cdi != unreg) {
 		prev = cdi;
@@ -460,7 +460,7 @@ int unregister_cdrom(struct cdrom_device_info *unreg)
 	}
 
 	if (cdi == NULL) {
-		spin_unlock(&cdrom_lock);
+		mutex_unlock(&cdrom_mutex);
 		return -2;
 	}
 	if (prev)
@@ -468,7 +468,7 @@ int unregister_cdrom(struct cdrom_device_info *unreg)
 	else
 		topCdromPtr = cdi->next;
 
-	spin_unlock(&cdrom_lock);
+	mutex_unlock(&cdrom_mutex);
 
 	if (cdi->exit)
 		cdi->exit(cdi);
@@ -3289,103 +3289,137 @@ static struct cdrom_sysctl_settings {
 	int	check;			/* check media type */
 } cdrom_sysctl_settings;
 
+enum cdrom_print_option {
+	CTL_NAME,
+	CTL_SPEED,
+	CTL_SLOTS,
+	CTL_CAPABILITY
+};
+
+static int cdrom_print_info(const char *header, int val, char *info,
+				int *pos, enum cdrom_print_option option)
+{
+	const int max_size = sizeof(cdrom_sysctl_settings.info);
+	struct cdrom_device_info *cdi;
+	int ret;
+
+	ret = scnprintf(info + *pos, max_size - *pos, header);
+	if (!ret)
+		return 1;
+
+	*pos += ret;
+
+	for (cdi = topCdromPtr; cdi; cdi = cdi->next) {
+		switch (option) {
+		case CTL_NAME:
+			ret = scnprintf(info + *pos, max_size - *pos,
+					"\t%s", cdi->name);
+			break;
+		case CTL_SPEED:
+			ret = scnprintf(info + *pos, max_size - *pos,
+					"\t%d", cdi->speed);
+			break;
+		case CTL_SLOTS:
+			ret = scnprintf(info + *pos, max_size - *pos,
+					"\t%d", cdi->capacity);
+			break;
+		case CTL_CAPABILITY:
+			ret = scnprintf(info + *pos, max_size - *pos,
+					"\t%d", CDROM_CAN(val) != 0);
+			break;
+		default:
+			printk(KERN_INFO "cdrom: invalid option%d\n", option);
+			return 1;
+		}
+		if (!ret)
+			return 1;
+		*pos += ret;
+	}
+
+	return 0;
+}
+
 static int cdrom_sysctl_info(ctl_table *ctl, int write, struct file * filp,
                            void __user *buffer, size_t *lenp, loff_t *ppos)
 {
-        int pos;
-	struct cdrom_device_info *cdi;
+	int pos;
 	char *info = cdrom_sysctl_settings.info;
+	const int max_size = sizeof(cdrom_sysctl_settings.info);
 	
 	if (!*lenp || (*ppos && !write)) {
 		*lenp = 0;
 		return 0;
 	}
 
+	mutex_lock(&cdrom_mutex);
+
 	pos = sprintf(info, "CD-ROM information, " VERSION "\n");
 	
-	pos += sprintf(info+pos, "\ndrive name:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%s", cdi->name);
-
-	pos += sprintf(info+pos, "\ndrive speed:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", cdi->speed);
-
-	pos += sprintf(info+pos, "\ndrive # of slots:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", cdi->capacity);
-
-	pos += sprintf(info+pos, "\nCan close tray:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_CLOSE_TRAY) != 0);
-
-	pos += sprintf(info+pos, "\nCan open tray:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_OPEN_TRAY) != 0);
-
-	pos += sprintf(info+pos, "\nCan lock tray:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_LOCK) != 0);
-
-	pos += sprintf(info+pos, "\nCan change speed:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_SELECT_SPEED) != 0);
-
-	pos += sprintf(info+pos, "\nCan select disk:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_SELECT_DISC) != 0);
-
-	pos += sprintf(info+pos, "\nCan read multisession:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MULTI_SESSION) != 0);
-
-	pos += sprintf(info+pos, "\nCan read MCN:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MCN) != 0);
-
-	pos += sprintf(info+pos, "\nReports media changed:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MEDIA_CHANGED) != 0);
-
-	pos += sprintf(info+pos, "\nCan play audio:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_PLAY_AUDIO) != 0);
-
-	pos += sprintf(info+pos, "\nCan write CD-R:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_CD_R) != 0);
-
-	pos += sprintf(info+pos, "\nCan write CD-RW:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_CD_RW) != 0);
-
-	pos += sprintf(info+pos, "\nCan read DVD:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_DVD) != 0);
-
-	pos += sprintf(info+pos, "\nCan write DVD-R:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_DVD_R) != 0);
-
-	pos += sprintf(info+pos, "\nCan write DVD-RAM:");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_DVD_RAM) != 0);
-
-	pos += sprintf(info+pos, "\nCan read MRW:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MRW) != 0);
-
-	pos += sprintf(info+pos, "\nCan write MRW:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MRW_W) != 0);
-
-	pos += sprintf(info+pos, "\nCan write RAM:\t");
-	for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next)
-	    pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_RAM) != 0);
-
-	strcpy(info+pos,"\n\n");
-		
-        return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+	if (cdrom_print_info("\ndrive name:\t", 0, info, &pos, CTL_NAME))
+		goto done;
+	if (cdrom_print_info("\ndrive speed:\t", 0, info, &pos, CTL_SPEED))
+		goto done;
+	if (cdrom_print_info("\ndrive # of slots:", 0, info, &pos, CTL_SLOTS))
+		goto done;
+	if (cdrom_print_info("\nCan close tray:\t",
+				CDC_CLOSE_TRAY, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan open tray:\t",
+				CDC_OPEN_TRAY, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan lock tray:\t",
+				CDC_LOCK, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan change speed:",
+				CDC_SELECT_SPEED, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan select disk:",
+				CDC_SELECT_DISC, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan read multisession:",
+				CDC_MULTI_SESSION, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan read MCN:\t",
+				CDC_MCN, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nReports media changed:",
+				CDC_MEDIA_CHANGED, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan play audio:\t",
+				CDC_PLAY_AUDIO, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan write CD-R:\t",
+				CDC_CD_R, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan write CD-RW:",
+				CDC_CD_RW, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan read DVD:\t",
+				CDC_DVD, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan write DVD-R:",
+				CDC_DVD_R, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan write DVD-RAM:",
+				CDC_DVD_RAM, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan read MRW:\t",
+				CDC_MRW, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan write MRW:\t",
+				CDC_MRW_W, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (cdrom_print_info("\nCan write RAM:\t",
+				CDC_RAM, info, &pos, CTL_CAPABILITY))
+		goto done;
+	if (!scnprintf(info + pos, max_size - pos, "\n\n"))
+		goto done;
+doit:
+	mutex_unlock(&cdrom_mutex);
+	return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+done:
+	printk(KERN_INFO "cdrom: info buffer too small\n");
+	goto doit;
 }
 
 /* Unfortunately, per device settings are not implemented through
diff --git a/drivers/cdrom/cdu31a.c b/drivers/cdrom/cdu31a.c
deleted file mode 100644
index 2157c58755e0..000000000000
--- a/drivers/cdrom/cdu31a.c
+++ /dev/null
@@ -1,3251 +0,0 @@
-/*
-* Sony CDU-31A CDROM interface device driver.
-*
-* Corey Minyard (minyard@wf-rch.cirr.com)
-*
-* Colossians 3:17
-*
-*  See Documentation/cdrom/cdu31a for additional details about this driver.
-* 
-* The Sony interface device driver handles Sony interface CDROM
-* drives and provides a complete block-level interface as well as an
-* ioctl() interface compatible with the Sun (as specified in
-* include/linux/cdrom.h).  With this interface, CDROMs can be
-* accessed and standard audio CDs can be played back normally.
-*
-* WARNING - 	All autoprobes have been removed from the driver.
-*		You MUST configure the CDU31A via a LILO config
-*		at boot time or in lilo.conf.  I have the
-*		following in my lilo.conf:
-*
-*                append="cdu31a=0x1f88,0,PAS"
-*
-*		The first number is the I/O base address of the
-*		card.  The second is the interrupt (0 means none).
- *		The third should be "PAS" if on a Pro-Audio
- *		spectrum, or nothing if on something else.
- *
- * This interface is (unfortunately) a polled interface.  This is
- * because most Sony interfaces are set up with DMA and interrupts
- * disables.  Some (like mine) do not even have the capability to
- * handle interrupts or DMA.  For this reason you will see a lot of
- * the following:
- *
- *   retry_count = jiffies+ SONY_JIFFIES_TIMEOUT;
- *   while (time_before(jiffies, retry_count) && (! <some condition to wait for))
- *   {
- *      while (handle_sony_cd_attention())
- *         ;
- *
- *      sony_sleep();
- *   }
- *   if (the condition not met)
- *   {
- *      return an error;
- *   }
- *
- * This ugly hack waits for something to happen, sleeping a little
- * between every try.  it also handles attentions, which are
- * asynchronous events from the drive informing the driver that a disk
- * has been inserted, removed, etc.
- *
- * NEWS FLASH - The driver now supports interrupts but they are
- * turned off by default.  Use of interrupts is highly encouraged, it
- * cuts CPU usage down to a reasonable level.  I had DMA in for a while
- * but PC DMA is just too slow.  Better to just insb() it.
- *
- * One thing about these drives: They talk in MSF (Minute Second Frame) format.
- * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a
- * disk.  The funny thing is that these are sent to the drive in BCD, but the
- * interface wants to see them in decimal.  A lot of conversion goes on.
- *
- * DRIVER SPECIAL FEATURES
- * -----------------------
- *
- * This section describes features beyond the normal audio and CD-ROM
- * functions of the drive.
- *
- * XA compatibility
- *
- * The driver should support XA disks for both the CDU31A and CDU33A.
- * It does this transparently, the using program doesn't need to set it.
- *
- * Multi-Session
- *
- * A multi-session disk looks just like a normal disk to the user.
- * Just mount one normally, and all the data should be there.
- * A special thanks to Koen for help with this!
- * 
- * Raw sector I/O
- *
- * Using the CDROMREADAUDIO it is possible to read raw audio and data
- * tracks.  Both operations return 2352 bytes per sector.  On the data
- * tracks, the first 12 bytes is not returned by the drive and the value
- * of that data is indeterminate.
- *
- *
- *  Copyright (C) 1993  Corey Minyard
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * TODO: 
- *       CDs with form1 and form2 sectors cause problems
- *       with current read-ahead strategy.
- *
- * Credits:
- *    Heiko Eissfeldt <heiko@colossus.escape.de>
- *         For finding abug in the return of the track numbers.
- *         TOC processing redone for proper multisession support.
- *
- *
- *  It probably a little late to be adding a history, but I guess I
- *  will start.
- *
- *  10/24/95 - Added support for disabling the eject button when the
- *             drive is open.  Note that there is a small problem
- *             still here, if the eject button is pushed while the
- *             drive light is flashing, the drive will return a bad
- *             status and be reset.  It recovers, though.
- *
- *  03/07/97 - Fixed a problem with timers.
- *
- *
- *  18 Spetember 1997 -- Ported to Uniform CD-ROM driver by 
- *                 Heiko Eissfeldt <heiko@colossus.escape.de> with additional
- *                 changes by Erik Andersen <andersee@debian.org>
- *
- *  24 January 1998 -- Removed the scd_disc_status() function, which was now
- *                     just dead code left over from the port.
- *                          Erik Andersen <andersee@debian.org>
- *
- *  16 July 1998 -- Drive donated to Erik Andersen by John Kodis
- *                   <kodis@jagunet.com>.  Work begun on fixing driver to
- *                   work under 2.1.X.  Added temporary extra printks
- *                   which seem to slow it down enough to work.
- *
- *  9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	               Removed init_module & cleanup_module in favor of 
- *		       module_init & module_exit.
- *		       Torben Mathiasen <tmm@image.dk>
- *
- * 22 October 2004 -- Make the driver work in 2.6.X
- *		      Added workaround to fix hard lockups on eject
- *		      Fixed door locking problem after mounting empty drive
- *		      Set double-speed drives to double speed by default
- *		      Removed all readahead things - not needed anymore
- *			Ondrej Zary <rainbow@rainbow-software.org>
-*/
-
-#define DEBUG 1
-
-#include <linux/major.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/cdrom.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/dma.h>
-
-#include "cdu31a.h"
-
-#define MAJOR_NR CDU31A_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#define CDU31A_MAX_CONSECUTIVE_ATTENTIONS 10
-
-#define PFX "CDU31A: "
-
-/*
-** Edit the following data to change interrupts, DMA channels, etc.
-** Default is polled and no DMA.  DMA is not recommended for double-speed
-** drives.
-*/
-static struct {
-	unsigned short base;	/* I/O Base Address */
-	short int_num;		/* Interrupt Number (-1 means scan for it,
-				   0 means don't use) */
-} cdu31a_addresses[] __initdata = {
-	{0}
-};
-
-static int handle_sony_cd_attention(void);
-static int read_subcode(void);
-static void sony_get_toc(void);
-static int scd_spinup(void);
-/*static int scd_open(struct inode *inode, struct file *filp);*/
-static int scd_open(struct cdrom_device_info *, int);
-static void do_sony_cd_cmd(unsigned char cmd,
-			   unsigned char *params,
-			   unsigned int num_params,
-			   unsigned char *result_buffer,
-			   unsigned int *result_size);
-static void size_to_buf(unsigned int size, unsigned char *buf);
-
-/* Parameters for the read-ahead. */
-static unsigned int sony_next_block;	/* Next 512 byte block offset */
-static unsigned int sony_blocks_left = 0;	/* Number of 512 byte blocks left
-						   in the current read command. */
-
-
-/* The base I/O address of the Sony Interface.  This is a variable (not a
-   #define) so it can be easily changed via some future ioctl() */
-static unsigned int cdu31a_port = 0;
-module_param(cdu31a_port, uint, 0);
-
-/*
- * The following are I/O addresses of the various registers for the drive.  The
- * comment for the base address also applies here.
- */
-static volatile unsigned short sony_cd_cmd_reg;
-static volatile unsigned short sony_cd_param_reg;
-static volatile unsigned short sony_cd_write_reg;
-static volatile unsigned short sony_cd_control_reg;
-static volatile unsigned short sony_cd_status_reg;
-static volatile unsigned short sony_cd_result_reg;
-static volatile unsigned short sony_cd_read_reg;
-static volatile unsigned short sony_cd_fifost_reg;
-
-static struct request_queue *cdu31a_queue;
-static DEFINE_SPINLOCK(cdu31a_lock); /* queue lock */
-
-static int sony_spun_up = 0;	/* Has the drive been spun up? */
-
-static int sony_speed = 0;	/* Last wanted speed */
-
-static int sony_xa_mode = 0;	/* Is an XA disk in the drive
-				   and the drive a CDU31A? */
-
-static int sony_raw_data_mode = 1;	/* 1 if data tracks, 0 if audio.
-					   For raw data reads. */
-
-static unsigned int sony_usage = 0;	/* How many processes have the
-					   drive open. */
-
-static int sony_pas_init = 0;	/* Initialize the Pro-Audio
-				   Spectrum card? */
-
-static struct s_sony_session_toc single_toc;	/* Holds the
-						   table of
-						   contents. */
-
-static struct s_all_sessions_toc sony_toc;	/* entries gathered from all
-						   sessions */
-
-static int sony_toc_read = 0;	/* Has the TOC been read for
-				   the drive? */
-
-static struct s_sony_subcode last_sony_subcode;	/* Points to the last
-						   subcode address read */
-
-static DECLARE_MUTEX(sony_sem);		/* Semaphore for drive hardware access */
-
-static int is_double_speed = 0;	/* does the drive support double speed ? */
-
-static int is_auto_eject = 1;	/* Door has been locked? 1=No/0=Yes */
-
-/*
- * The audio status uses the values from read subchannel data as specified
- * in include/linux/cdrom.h.
- */
-static volatile int sony_audio_status = CDROM_AUDIO_NO_STATUS;
-
-/*
- * The following are a hack for pausing and resuming audio play.  The drive
- * does not work as I would expect it, if you stop it then start it again,
- * the drive seeks back to the beginning and starts over.  This holds the
- * position during a pause so a resume can restart it.  It uses the
- * audio status variable above to tell if it is paused.
- */
-static unsigned volatile char cur_pos_msf[3] = { 0, 0, 0 };
-static unsigned volatile char final_pos_msf[3] = { 0, 0, 0 };
-
-/* What IRQ is the drive using?  0 if none. */
-static int cdu31a_irq = 0;
-module_param(cdu31a_irq, int, 0);
-
-/* The interrupt handler will wake this queue up when it gets an
-   interrupts. */
-static DECLARE_WAIT_QUEUE_HEAD(cdu31a_irq_wait);
-static int irq_flag = 0;
-
-static int curr_control_reg = 0;	/* Current value of the control register */
-
-/* A disk changed variable.  When a disk change is detected, it will
-   all be set to TRUE.  As the upper layers ask for disk_changed status
-   it will be cleared. */
-static char disk_changed;
-
-/* This was readahead_buffer once... Now it's used only for audio reads */
-static char audio_buffer[CD_FRAMESIZE_RAW];
-
-/* Used to time a short period to abort an operation after the
-   drive has been idle for a while.  This keeps the light on
-   the drive from flashing for very long. */
-static struct timer_list cdu31a_abort_timer;
-
-/* Marks if the timeout has started an abort read.  This is used
-   on entry to the drive to tell the code to read out the status
-   from the abort read. */
-static int abort_read_started = 0;
-
-/*
- * Uniform cdrom interface function
- * report back, if disc has changed from time of last request.
- */
-static int scd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
-	int retval;
-
-	retval = disk_changed;
-	disk_changed = 0;
-
-	return retval;
-}
-
-/*
- * Uniform cdrom interface function
- * report back, if drive is ready
- */
-static int scd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
-	if (CDSL_CURRENT != slot_nr)
-		/* we have no changer support */
-		return -EINVAL;
-	if (sony_spun_up)
-		return CDS_DISC_OK;
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	if (scd_spinup() == 0)
-		sony_spun_up = 1;
-	up(&sony_sem);
-	return sony_spun_up ? CDS_DISC_OK : CDS_DRIVE_NOT_READY;
-}
-
-static inline void enable_interrupts(void)
-{
-	curr_control_reg |= (SONY_ATTN_INT_EN_BIT
-			     | SONY_RES_RDY_INT_EN_BIT
-			     | SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-}
-
-static inline void disable_interrupts(void)
-{
-	curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT
-			      | SONY_RES_RDY_INT_EN_BIT
-			      | SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-}
-
-/*
- * Wait a little while (used for polling the drive).  If in initialization,
- * setting a timeout doesn't work, so just loop for a while.
- */
-static inline void sony_sleep(void)
-{
-	if (cdu31a_irq <= 0) {
-		yield();
-	} else {		/* Interrupt driven */
-		DEFINE_WAIT(w);
-		int first = 1;
-
-		while (1) {
-			prepare_to_wait(&cdu31a_irq_wait, &w,
-					TASK_INTERRUPTIBLE);
-			if (first) {
-				enable_interrupts();
-				first = 0;
-			}
-
-			if (irq_flag != 0)
-				break;
-			if (!signal_pending(current)) {
-				schedule();
-				continue;
-			} else
-				disable_interrupts();
-			break;
-		}
-		finish_wait(&cdu31a_irq_wait, &w);
-		irq_flag = 0;
-	}
-}
-
-
-/*
- * The following are convenience routine to read various status and set
- * various conditions in the drive.
- */
-static inline int is_attention(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_ATTN_BIT) != 0;
-}
-
-static inline int is_busy(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_BUSY_BIT) != 0;
-}
-
-static inline int is_data_ready(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_DATA_RDY_BIT) != 0;
-}
-
-static inline int is_data_requested(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_DATA_REQUEST_BIT) != 0;
-}
-
-static inline int is_result_ready(void)
-{
-	return (inb(sony_cd_status_reg) & SONY_RES_RDY_BIT) != 0;
-}
-
-static inline int is_param_write_rdy(void)
-{
-	return (inb(sony_cd_fifost_reg) & SONY_PARAM_WRITE_RDY_BIT) != 0;
-}
-
-static inline int is_result_reg_not_empty(void)
-{
-	return (inb(sony_cd_fifost_reg) & SONY_RES_REG_NOT_EMP_BIT) != 0;
-}
-
-static inline void reset_drive(void)
-{
-	curr_control_reg = 0;
-	sony_toc_read = 0;
-	outb(SONY_DRIVE_RESET_BIT, sony_cd_control_reg);
-}
-
-/*
- * Uniform cdrom interface function
- * reset drive and return when it is ready
- */
-static int scd_reset(struct cdrom_device_info *cdi)
-{
-	unsigned long retry_count;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	reset_drive();
-
-	retry_count = jiffies + SONY_RESET_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (!is_attention())) {
-		sony_sleep();
-	}
-
-	up(&sony_sem);
-	return 0;
-}
-
-static inline void clear_attention(void)
-{
-	outb(curr_control_reg | SONY_ATTN_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline void clear_result_ready(void)
-{
-	outb(curr_control_reg | SONY_RES_RDY_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline void clear_data_ready(void)
-{
-	outb(curr_control_reg | SONY_DATA_RDY_CLR_BIT,
-	     sony_cd_control_reg);
-}
-
-static inline void clear_param_reg(void)
-{
-	outb(curr_control_reg | SONY_PARAM_CLR_BIT, sony_cd_control_reg);
-}
-
-static inline unsigned char read_status_register(void)
-{
-	return inb(sony_cd_status_reg);
-}
-
-static inline unsigned char read_result_register(void)
-{
-	return inb(sony_cd_result_reg);
-}
-
-static inline unsigned char read_data_register(void)
-{
-	return inb(sony_cd_read_reg);
-}
-
-static inline void write_param(unsigned char param)
-{
-	outb(param, sony_cd_param_reg);
-}
-
-static inline void write_cmd(unsigned char cmd)
-{
-	outb(curr_control_reg | SONY_RES_RDY_INT_EN_BIT,
-	     sony_cd_control_reg);
-	outb(cmd, sony_cd_cmd_reg);
-}
-
-static irqreturn_t cdu31a_interrupt(int irq, void *dev_id)
-{
-	unsigned char val;
-
-	if (abort_read_started) {
-		/* We might be waiting for an abort to finish.  Don't
-		   disable interrupts yet, though, because we handle
-		   this one here. */
-		/* Clear out the result registers. */
-		while (is_result_reg_not_empty()) {
-			val = read_result_register();
-		}
-		clear_data_ready();
-		clear_result_ready();
-
-		/* Clear out the data */
-		while (is_data_requested()) {
-			val = read_data_register();
-		}
-		abort_read_started = 0;
-
-		/* If something was waiting, wake it up now. */
-		if (waitqueue_active(&cdu31a_irq_wait)) {
-			disable_interrupts();
-			irq_flag = 1;
-			wake_up_interruptible(&cdu31a_irq_wait);
-		}
-	} else if (waitqueue_active(&cdu31a_irq_wait)) {
-		disable_interrupts();
-		irq_flag = 1;
-		wake_up_interruptible(&cdu31a_irq_wait);
-	} else {
-		disable_interrupts();
-		printk(KERN_NOTICE PFX
-				"Got an interrupt but nothing was waiting\n");
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * give more verbose error messages
- */
-static unsigned char *translate_error(unsigned char err_code)
-{
-	static unsigned char errbuf[80];
-
-	switch (err_code) {
-		case 0x10: return "illegal command ";
-		case 0x11: return "illegal parameter ";
-
-		case 0x20: return "not loaded ";
-		case 0x21: return "no disc ";
-		case 0x22: return "not spinning ";
-		case 0x23: return "spinning ";
-		case 0x25: return "spindle servo ";
-		case 0x26: return "focus servo ";
-		case 0x29: return "eject mechanism ";
-		case 0x2a: return "audio playing ";
-		case 0x2c: return "emergency eject ";
-
-		case 0x30: return "focus ";
-		case 0x31: return "frame sync ";
-		case 0x32: return "subcode address ";
-		case 0x33: return "block sync ";
-		case 0x34: return "header address ";
-
-		case 0x40: return "illegal track read ";
-		case 0x41: return "mode 0 read ";
-		case 0x42: return "illegal mode read ";
-		case 0x43: return "illegal block size read ";
-		case 0x44: return "mode read ";
-		case 0x45: return "form read ";
-		case 0x46: return "leadout read ";
-		case 0x47: return "buffer overrun ";
-
-		case 0x53: return "unrecoverable CIRC ";
-		case 0x57: return "unrecoverable LECC ";
-
-		case 0x60: return "no TOC ";
-		case 0x61: return "invalid subcode data ";
-		case 0x63: return "focus on TOC read ";
-		case 0x64: return "frame sync on TOC read ";
-		case 0x65: return "TOC data ";
-
-		case 0x70: return "hardware failure ";
-		case 0x91: return "leadin ";
-		case 0x92: return "leadout ";
-		case 0x93: return "data track ";
-	}
-	sprintf(errbuf, "unknown 0x%02x ", err_code);
-	return errbuf;
-}
-
-/*
- * Set the drive parameters so the drive will auto-spin-up when a
- * disk is inserted.
- */
-static void set_drive_params(int want_doublespeed)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned char params[3];
-
-
-	params[0] = SONY_SD_AUTO_SPIN_DOWN_TIME;
-	params[1] = 0x00;	/* Never spin down the drive. */
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_NOTICE PFX
-			"Unable to set spin-down time: 0x%2.2x\n", res_reg[1]);
-	}
-
-	params[0] = SONY_SD_MECH_CONTROL;
-	params[1] = SONY_AUTO_SPIN_UP_BIT;	/* Set auto spin up */
-
-	if (is_auto_eject)
-		params[1] |= SONY_AUTO_EJECT_BIT;
-
-	if (is_double_speed && want_doublespeed) {
-		params[1] |= SONY_DOUBLE_SPEED_BIT;	/* Set the drive to double speed if 
-							   possible */
-	}
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_NOTICE PFX "Unable to set mechanical "
-				"parameters: 0x%2.2x\n", res_reg[1]);
-	}
-}
-
-/*
- * Uniform cdrom interface function
- * select reading speed for data access
- */
-static int scd_select_speed(struct cdrom_device_info *cdi, int speed)
-{
-	if (speed == 0)
-		sony_speed = 1;
-	else
-		sony_speed = speed - 1;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	set_drive_params(sony_speed);
-	up(&sony_sem);
-	return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * lock or unlock eject button
- */
-static int scd_lock_door(struct cdrom_device_info *cdi, int lock)
-{
-	if (lock == 0) {
-		is_auto_eject = 1;
-	} else {
-		is_auto_eject = 0;
-	}
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	set_drive_params(sony_speed);
-	up(&sony_sem);
-	return 0;
-}
-
-/*
- * This code will reset the drive and attempt to restore sane parameters.
- */
-static void restart_on_error(void)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned long retry_count;
-
-
-	printk(KERN_NOTICE PFX "Resetting drive on error\n");
-	reset_drive();
-	retry_count = jiffies + SONY_RESET_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (!is_attention())) {
-		sony_sleep();
-	}
-	set_drive_params(sony_speed);
-	do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_NOTICE PFX "Unable to spin up drive: 0x%2.2x\n",
-		       res_reg[1]);
-	}
-
-	msleep(2000);
-
-	sony_get_toc();
-}
-
-/*
- * This routine writes data to the parameter register.  Since this should
- * happen fairly fast, it is polled with no OS waits between.
- */
-static int write_params(unsigned char *params, int num_params)
-{
-	unsigned int retry_count;
-
-
-	retry_count = SONY_READY_RETRIES;
-	while ((retry_count > 0) && (!is_param_write_rdy())) {
-		retry_count--;
-	}
-	if (!is_param_write_rdy()) {
-		return -EIO;
-	}
-
-	while (num_params > 0) {
-		write_param(*params);
-		params++;
-		num_params--;
-	}
-
-	return 0;
-}
-
-
-/*
- * The following reads data from the command result register.  It is a
- * fairly complex routine, all status info flows back through this
- * interface.  The algorithm is stolen directly from the flowcharts in
- * the drive manual.
- */
-static void
-get_result(unsigned char *result_buffer, unsigned int *result_size)
-{
-	unsigned char a, b;
-	int i;
-	unsigned long retry_count;
-
-
-	while (handle_sony_cd_attention());
-	/* Wait for the result data to be ready */
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count)
-	       && (is_busy() || (!(is_result_ready())))) {
-		sony_sleep();
-
-		while (handle_sony_cd_attention());
-	}
-	if (is_busy() || (!(is_result_ready()))) {
-		pr_debug(PFX "timeout out %d\n", __LINE__);
-		result_buffer[0] = 0x20;
-		result_buffer[1] = SONY_TIMEOUT_OP_ERR;
-		*result_size = 2;
-		return;
-	}
-
-	/*
-	 * Get the first two bytes.  This determines what else needs
-	 * to be done.
-	 */
-	clear_result_ready();
-	a = read_result_register();
-	*result_buffer = a;
-	result_buffer++;
-
-	/* Check for block error status result. */
-	if ((a & 0xf0) == 0x50) {
-		*result_size = 1;
-		return;
-	}
-
-	b = read_result_register();
-	*result_buffer = b;
-	result_buffer++;
-	*result_size = 2;
-
-	/*
-	 * 0x20 means an error occurred.  Byte 2 will have the error code.
-	 * Otherwise, the command succeeded, byte 2 will have the count of
-	 * how many more status bytes are coming.
-	 *
-	 * The result register can be read 10 bytes at a time, a wait for
-	 * result ready to be asserted must be done between every 10 bytes.
-	 */
-	if ((a & 0xf0) != 0x20) {
-		if (b > 8) {
-			for (i = 0; i < 8; i++) {
-				*result_buffer = read_result_register();
-				result_buffer++;
-				(*result_size)++;
-			}
-			b = b - 8;
-
-			while (b > 10) {
-				retry_count = SONY_READY_RETRIES;
-				while ((retry_count > 0)
-				       && (!is_result_ready())) {
-					retry_count--;
-				}
-				if (!is_result_ready()) {
-					pr_debug(PFX "timeout out %d\n",
-					       __LINE__);
-					result_buffer[0] = 0x20;
-					result_buffer[1] =
-					    SONY_TIMEOUT_OP_ERR;
-					*result_size = 2;
-					return;
-				}
-
-				clear_result_ready();
-
-				for (i = 0; i < 10; i++) {
-					*result_buffer =
-					    read_result_register();
-					result_buffer++;
-					(*result_size)++;
-				}
-				b = b - 10;
-			}
-
-			if (b > 0) {
-				retry_count = SONY_READY_RETRIES;
-				while ((retry_count > 0)
-				       && (!is_result_ready())) {
-					retry_count--;
-				}
-				if (!is_result_ready()) {
-					pr_debug(PFX "timeout out %d\n",
-					       __LINE__);
-					result_buffer[0] = 0x20;
-					result_buffer[1] =
-					    SONY_TIMEOUT_OP_ERR;
-					*result_size = 2;
-					return;
-				}
-			}
-		}
-
-		while (b > 0) {
-			*result_buffer = read_result_register();
-			result_buffer++;
-			(*result_size)++;
-			b--;
-		}
-	}
-}
-
-/*
- * Do a command that does not involve data transfer.  This routine must
- * be re-entrant from the same task to support being called from the
- * data operation code when an error occurs.
- */
-static void
-do_sony_cd_cmd(unsigned char cmd,
-	       unsigned char *params,
-	       unsigned int num_params,
-	       unsigned char *result_buffer, unsigned int *result_size)
-{
-	unsigned long retry_count;
-	int num_retries = 0;
-
-retry_cd_operation:
-
-	while (handle_sony_cd_attention());
-
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (is_busy())) {
-		sony_sleep();
-
-		while (handle_sony_cd_attention());
-	}
-	if (is_busy()) {
-		pr_debug(PFX "timeout out %d\n", __LINE__);
-		result_buffer[0] = 0x20;
-		result_buffer[1] = SONY_TIMEOUT_OP_ERR;
-		*result_size = 2;
-	} else {
-		clear_result_ready();
-		clear_param_reg();
-
-		write_params(params, num_params);
-		write_cmd(cmd);
-
-		get_result(result_buffer, result_size);
-	}
-
-	if (((result_buffer[0] & 0xf0) == 0x20)
-	    && (num_retries < MAX_CDU31A_RETRIES)) {
-		num_retries++;
-		msleep(100);
-		goto retry_cd_operation;
-	}
-}
-
-
-/*
- * Handle an attention from the drive.  This will return 1 if it found one
- * or 0 if not (if one is found, the caller might want to call again).
- *
- * This routine counts the number of consecutive times it is called
- * (since this is always called from a while loop until it returns
- * a 0), and returns a 0 if it happens too many times.  This will help
- * prevent a lockup.
- */
-static int handle_sony_cd_attention(void)
-{
-	unsigned char atten_code;
-	static int num_consecutive_attentions = 0;
-	volatile int val;
-
-
-#if 0
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-#endif
-	if (is_attention()) {
-		if (num_consecutive_attentions >
-		    CDU31A_MAX_CONSECUTIVE_ATTENTIONS) {
-			printk(KERN_NOTICE PFX "Too many consecutive "
-				"attentions: %d\n", num_consecutive_attentions);
-			num_consecutive_attentions = 0;
-			pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__,
-			       __LINE__);
-			return 0;
-		}
-
-		clear_attention();
-		atten_code = read_result_register();
-
-		switch (atten_code) {
-			/* Someone changed the CD.  Mark it as changed */
-		case SONY_MECH_LOADED_ATTN:
-			disk_changed = 1;
-			sony_toc_read = 0;
-			sony_audio_status = CDROM_AUDIO_NO_STATUS;
-			sony_blocks_left = 0;
-			break;
-
-		case SONY_SPIN_DOWN_COMPLETE_ATTN:
-			/* Mark the disk as spun down. */
-			sony_spun_up = 0;
-			break;
-
-		case SONY_AUDIO_PLAY_DONE_ATTN:
-			sony_audio_status = CDROM_AUDIO_COMPLETED;
-			read_subcode();
-			break;
-
-		case SONY_EJECT_PUSHED_ATTN:
-			if (is_auto_eject) {
-				sony_audio_status = CDROM_AUDIO_INVALID;
-			}
-			break;
-
-		case SONY_LEAD_IN_ERR_ATTN:
-		case SONY_LEAD_OUT_ERR_ATTN:
-		case SONY_DATA_TRACK_ERR_ATTN:
-		case SONY_AUDIO_PLAYBACK_ERR_ATTN:
-			sony_audio_status = CDROM_AUDIO_ERROR;
-			break;
-		}
-
-		num_consecutive_attentions++;
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 1;
-	} else if (abort_read_started) {
-		while (is_result_reg_not_empty()) {
-			val = read_result_register();
-		}
-		clear_data_ready();
-		clear_result_ready();
-		/* Clear out the data */
-		while (is_data_requested()) {
-			val = read_data_register();
-		}
-		abort_read_started = 0;
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 1;
-	}
-
-	num_consecutive_attentions = 0;
-#if 0
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-#endif
-	return 0;
-}
-
-
-/* Convert from an integer 0-99 to BCD */
-static inline unsigned int int_to_bcd(unsigned int val)
-{
-	int retval;
-
-
-	retval = (val / 10) << 4;
-	retval = retval | val % 10;
-	return retval;
-}
-
-
-/* Convert from BCD to an integer from 0-99 */
-static unsigned int bcd_to_int(unsigned int bcd)
-{
-	return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f);
-}
-
-
-/*
- * Convert a logical sector value (like the OS would want to use for
- * a block device) to an MSF format.
- */
-static void log_to_msf(unsigned int log, unsigned char *msf)
-{
-	log = log + LOG_START_OFFSET;
-	msf[0] = int_to_bcd(log / 4500);
-	log = log % 4500;
-	msf[1] = int_to_bcd(log / 75);
-	msf[2] = int_to_bcd(log % 75);
-}
-
-
-/*
- * Convert an MSF format to a logical sector.
- */
-static unsigned int msf_to_log(unsigned char *msf)
-{
-	unsigned int log;
-
-
-	log = msf[2];
-	log += msf[1] * 75;
-	log += msf[0] * 4500;
-	log = log - LOG_START_OFFSET;
-
-	return log;
-}
-
-
-/*
- * Take in integer size value and put it into a buffer like
- * the drive would want to see a number-of-sector value.
- */
-static void size_to_buf(unsigned int size, unsigned char *buf)
-{
-	buf[0] = size / 65536;
-	size = size % 65536;
-	buf[1] = size / 256;
-	buf[2] = size % 256;
-}
-
-/* Starts a read operation. Returns 0 on success and 1 on failure. 
-   The read operation used here allows multiple sequential sectors 
-   to be read and status returned for each sector.  The driver will
-   read the output one at a time as the requests come and abort the
-   operation if the requested sector is not the next one from the
-   drive. */
-static int
-start_request(unsigned int sector, unsigned int nsect)
-{
-	unsigned char params[6];
-	unsigned long retry_count;
-
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-	log_to_msf(sector, params);
-	size_to_buf(nsect, &params[3]);
-
-	/*
-	 * Clear any outstanding attentions and wait for the drive to
-	 * complete any pending operations.
-	 */
-	while (handle_sony_cd_attention());
-
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count) && (is_busy())) {
-		sony_sleep();
-
-		while (handle_sony_cd_attention());
-	}
-
-	if (is_busy()) {
-		printk(KERN_NOTICE PFX "Timeout while waiting "
-				"to issue command\n");
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 1;
-	} else {
-		/* Issue the command */
-		clear_result_ready();
-		clear_param_reg();
-
-		write_params(params, 6);
-		write_cmd(SONY_READ_BLKERR_STAT_CMD);
-
-		sony_blocks_left = nsect * 4;
-		sony_next_block = sector * 4;
-		pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-		return 0;
-	}
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-/* Abort a pending read operation.  Clear all the drive status variables. */
-static void abort_read(void)
-{
-	unsigned char result_reg[2];
-	int result_size;
-	volatile int val;
-
-
-	do_sony_cd_cmd(SONY_ABORT_CMD, NULL, 0, result_reg, &result_size);
-	if ((result_reg[0] & 0xf0) == 0x20) {
-		printk(KERN_ERR PFX "Aborting read, %s error\n",
-		       translate_error(result_reg[1]));
-	}
-
-	while (is_result_reg_not_empty()) {
-		val = read_result_register();
-	}
-	clear_data_ready();
-	clear_result_ready();
-	/* Clear out the data */
-	while (is_data_requested()) {
-		val = read_data_register();
-	}
-
-	sony_blocks_left = 0;
-}
-
-/* Called when the timer times out.  This will abort the
-   pending read operation. */
-static void handle_abort_timeout(unsigned long data)
-{
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-	/* If it is in use, ignore it. */
-	if (down_trylock(&sony_sem) == 0) {
-		/* We can't use abort_read(), because it will sleep
-		   or schedule in the timer interrupt.  Just start
-		   the operation, finish it on the next access to
-		   the drive. */
-		clear_result_ready();
-		clear_param_reg();
-		write_cmd(SONY_ABORT_CMD);
-
-		sony_blocks_left = 0;
-		abort_read_started = 1;
-		up(&sony_sem);
-	}
-	pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-/* Actually get one sector of data from the drive. */
-static void
-input_data_sector(char *buffer)
-{
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	/* If an XA disk on a CDU31A, skip the first 12 bytes of data from
-	   the disk.  The real data is after that. We can use audio_buffer. */
-	if (sony_xa_mode)
-		insb(sony_cd_read_reg, audio_buffer, CD_XA_HEAD);
-
-	clear_data_ready();
-
-	insb(sony_cd_read_reg, buffer, 2048);
-
-	/* If an XA disk, we have to clear out the rest of the unused
-	   error correction data. We can use audio_buffer for that. */
-	if (sony_xa_mode)
-		insb(sony_cd_read_reg, audio_buffer, CD_XA_TAIL);
-
-	pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-/* read data from the drive.  Note the nsect must be <= 4. */
-static void
-read_data_block(char *buffer,
-		unsigned int block,
-		unsigned int nblocks,
-		unsigned char res_reg[], int *res_size)
-{
-	unsigned long retry_count;
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	res_reg[0] = 0;
-	res_reg[1] = 0;
-	*res_size = 0;
-
-	/* Wait for the drive to tell us we have something */
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-	while (time_before(jiffies, retry_count) && !(is_data_ready())) {
-		while (handle_sony_cd_attention());
-
-		sony_sleep();
-	}
-	if (!(is_data_ready())) {
-		if (is_result_ready()) {
-			get_result(res_reg, res_size);
-			if ((res_reg[0] & 0xf0) != 0x20) {
-				printk(KERN_NOTICE PFX "Got result that should"
-					" have been error: %d\n", res_reg[0]);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-			abort_read();
-		} else {
-			pr_debug(PFX "timeout out %d\n", __LINE__);
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_TIMEOUT_OP_ERR;
-			*res_size = 2;
-			abort_read();
-		}
-	} else {
-		input_data_sector(buffer);
-		sony_blocks_left -= nblocks;
-		sony_next_block += nblocks;
-
-		/* Wait for the status from the drive. */
-		retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-		while (time_before(jiffies, retry_count)
-		       && !(is_result_ready())) {
-			while (handle_sony_cd_attention());
-
-			sony_sleep();
-		}
-
-		if (!is_result_ready()) {
-			pr_debug(PFX "timeout out %d\n", __LINE__);
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_TIMEOUT_OP_ERR;
-			*res_size = 2;
-			abort_read();
-		} else {
-			get_result(res_reg, res_size);
-
-			/* If we got a buffer status, handle that. */
-			if ((res_reg[0] & 0xf0) == 0x50) {
-
-				if ((res_reg[0] ==
-				     SONY_NO_CIRC_ERR_BLK_STAT)
-				    || (res_reg[0] ==
-					SONY_NO_LECC_ERR_BLK_STAT)
-				    || (res_reg[0] ==
-					SONY_RECOV_LECC_ERR_BLK_STAT)) {
-					/* nothing here */
-				} else {
-					printk(KERN_ERR PFX "Data block "
-						"error: 0x%x\n", res_reg[0]);
-					res_reg[0] = 0x20;
-					res_reg[1] = SONY_BAD_DATA_ERR;
-					*res_size = 2;
-				}
-
-				/* Final transfer is done for read command, get final result. */
-				if (sony_blocks_left == 0) {
-					get_result(res_reg, res_size);
-				}
-			} else if ((res_reg[0] & 0xf0) != 0x20) {
-				/* The drive gave me bad status, I don't know what to do.
-				   Reset the driver and return an error. */
-				printk(KERN_ERR PFX "Invalid block "
-					"status: 0x%x\n", res_reg[0]);
-				restart_on_error();
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-		}
-	}
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-
-/*
- * The OS calls this to perform a read or write operation to the drive.
- * Write obviously fail.  Reads to a read ahead of sony_buffer_size
- * bytes to help speed operations.  This especially helps since the OS
- * uses 1024 byte blocks and the drive uses 2048 byte blocks.  Since most
- * data access on a CD is done sequentially, this saves a lot of operations.
- */
-static void do_cdu31a_request(request_queue_t * q)
-{
-	struct request *req;
-	int block, nblock, num_retries;
-	unsigned char res_reg[12];
-	unsigned int res_size;
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	spin_unlock_irq(q->queue_lock);
-	if (down_interruptible(&sony_sem)) {
-		spin_lock_irq(q->queue_lock);
-		return;
-	}
-
-	/* Get drive status before doing anything. */
-	while (handle_sony_cd_attention());
-
-	/* Make sure we have a valid TOC. */
-	sony_get_toc();
-
-
-	/* Make sure the timer is cancelled. */
-	del_timer(&cdu31a_abort_timer);
-
-	while (1) {
-		/*
-		 * The beginning here is stolen from the hard disk driver.  I hope
-		 * it's right.
-		 */
-		req = elv_next_request(q);
-		if (!req)
-			goto end_do_cdu31a_request;
-
-		if (!sony_spun_up)
-			scd_spinup();
-
-		block = req->sector;
-		nblock = req->nr_sectors;
-		pr_debug(PFX "request at block %d, length %d blocks\n",
-			block, nblock);
-		if (!sony_toc_read) {
-			printk(KERN_NOTICE PFX "TOC not read\n");
-			end_request(req, 0);
-			continue;
-		}
-
-		/* WTF??? */
-		if (!blk_fs_request(req)) {
-			end_request(req, 0);
-			continue;
-		}
-		if (rq_data_dir(req) == WRITE) {
-			end_request(req, 0);
-			continue;
-		}
-
-		/*
-		 * If the block address is invalid or the request goes beyond the end of
-		 * the media, return an error.
-		 */
-		if (((block + nblock) / 4) >= sony_toc.lead_out_start_lba) {
-			printk(KERN_NOTICE PFX "Request past end of media\n");
-			end_request(req, 0);
-			continue;
-		}
-
-		if (nblock > 4)
-			nblock = 4;
-		num_retries = 0;
-
-	try_read_again:
-		while (handle_sony_cd_attention());
-
-		if (!sony_toc_read) {
-			printk(KERN_NOTICE PFX "TOC not read\n");
-			end_request(req, 0);
-			continue;
-		}
-
-		/* If no data is left to be read from the drive, start the
-		   next request. */
-		if (sony_blocks_left == 0) {
-			if (start_request(block / 4, nblock / 4)) {
-				end_request(req, 0);
-				continue;
-			}
-		}
-		/* If the requested block is not the next one waiting in
-		   the driver, abort the current operation and start a
-		   new one. */
-		else if (block != sony_next_block) {
-			pr_debug(PFX "Read for block %d, expected %d\n",
-				 block, sony_next_block);
-			abort_read();
-			if (!sony_toc_read) {
-				printk(KERN_NOTICE PFX "TOC not read\n");
-				end_request(req, 0);
-				continue;
-			}
-			if (start_request(block / 4, nblock / 4)) {
-				printk(KERN_NOTICE PFX "start request failed\n");
-				end_request(req, 0);
-				continue;
-			}
-		}
-
-		read_data_block(req->buffer, block, nblock, res_reg, &res_size);
-
-		if (res_reg[0] != 0x20) {
-			if (!end_that_request_first(req, 1, nblock)) {
-				spin_lock_irq(q->queue_lock);
-				blkdev_dequeue_request(req);
-				end_that_request_last(req, 1);
-				spin_unlock_irq(q->queue_lock);
-			}
-			continue;
-		}
-
-		if (num_retries > MAX_CDU31A_RETRIES) {
-			end_request(req, 0);
-			continue;
-		}
-
-		num_retries++;
-		if (res_reg[1] == SONY_NOT_SPIN_ERR) {
-			do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-					&res_size);
-		} else {
-			printk(KERN_NOTICE PFX "%s error for block %d, nblock %d\n",
-				 translate_error(res_reg[1]), block, nblock);
-		}
-		goto try_read_again;
-	}
-      end_do_cdu31a_request:
-#if 0
-	/* After finished, cancel any pending operations. */
-	abort_read();
-#else
-	/* Start a timer to time out after a while to disable
-	   the read. */
-	cdu31a_abort_timer.expires = jiffies + 2 * HZ;	/* Wait 2 seconds */
-	add_timer(&cdu31a_abort_timer);
-#endif
-
-	up(&sony_sem);
-	spin_lock_irq(q->queue_lock);
-	pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__);
-}
-
-
-/*
- * Read the table of contents from the drive and set up TOC if
- * successful.
- */
-static void sony_get_toc(void)
-{
-	unsigned char res_reg[2];
-	unsigned int res_size;
-	unsigned char parms[1];
-	int session;
-	int num_spin_ups;
-	int totaltracks = 0;
-	int mint = 99;
-	int maxt = 0;
-
-	pr_debug(PFX "Entering %s\n", __FUNCTION__);
-
-	num_spin_ups = 0;
-	if (!sony_toc_read) {
-	      respinup_on_gettoc:
-		/* Ignore the result, since it might error if spinning already. */
-		do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/* The drive sometimes returns error 0.  I don't know why, but ignore
-		   it.  It seems to mean the drive has already done the operation. */
-		if ((res_size < 2)
-		    || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
-			/* If the drive is already playing, it's ok.  */
-			if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR)
-			    || (res_reg[1] == 0)) {
-				goto gettoc_drive_spinning;
-			}
-
-			/* If the drive says it is not spun up (even though we just did it!)
-			   then retry the operation at least a few times. */
-			if ((res_reg[1] == SONY_NOT_SPIN_ERR)
-			    && (num_spin_ups < MAX_CDU31A_RETRIES)) {
-				num_spin_ups++;
-				goto respinup_on_gettoc;
-			}
-
-			printk("cdu31a: Error reading TOC: %x %s\n",
-			       res_reg[0], translate_error(res_reg[1]));
-			return;
-		}
-
-	      gettoc_drive_spinning:
-
-		/* The idea here is we keep asking for sessions until the command
-		   fails.  Then we know what the last valid session on the disk is.
-		   No need to check session 0, since session 0 is the same as session
-		   1; the command returns different information if you give it 0. 
-		 */
-#if DEBUG
-		memset(&sony_toc, 0x0e, sizeof(sony_toc));
-		memset(&single_toc, 0x0f, sizeof(single_toc));
-#endif
-		session = 1;
-		while (1) {
-/* This seems to slow things down enough to make it work.  This
- * appears to be a problem in do_sony_cd_cmd.  This printk seems 
- * to address the symptoms...  -Erik */
-			pr_debug(PFX "Trying session %d\n", session);
-			parms[0] = session;
-			do_sony_cd_cmd(SONY_READ_TOC_SPEC_CMD,
-				       parms, 1, res_reg, &res_size);
-
-			pr_debug(PFX "%2.2x %2.2x\n", res_reg[0], res_reg[1]);
-
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				/* An error reading the TOC, this must be past the last session. */
-				if (session == 1)
-					printk
-					    ("Yikes! Couldn't read any sessions!");
-				break;
-			}
-			pr_debug(PFX "Reading session %d\n", session);
-
-			parms[0] = session;
-			do_sony_cd_cmd(SONY_REQ_TOC_DATA_SPEC_CMD,
-				       parms,
-				       1,
-				       (unsigned char *) &single_toc,
-				       &res_size);
-			if ((res_size < 2)
-			    || ((single_toc.exec_status[0] & 0xf0) ==
-				0x20)) {
-				printk(KERN_ERR PFX "Error reading "
-						"session %d: %x %s\n",
-				     session, single_toc.exec_status[0],
-				     translate_error(single_toc.
-						     exec_status[1]));
-				/* An error reading the TOC.  Return without sony_toc_read
-				   set. */
-				return;
-			}
-			pr_debug(PFX "add0 %01x, con0 %01x, poi0 %02x, "
-					"1st trk %d, dsktyp %x, dum0 %x\n",
-			     single_toc.address0, single_toc.control0,
-			     single_toc.point0,
-			     bcd_to_int(single_toc.first_track_num),
-			     single_toc.disk_type, single_toc.dummy0);
-			pr_debug(PFX "add1 %01x, con1 %01x, poi1 %02x, "
-					"lst trk %d, dummy1 %x, dum2 %x\n",
-			     single_toc.address1, single_toc.control1,
-			     single_toc.point1,
-			     bcd_to_int(single_toc.last_track_num),
-			     single_toc.dummy1, single_toc.dummy2);
-			pr_debug(PFX "add2 %01x, con2 %01x, poi2 %02x "
-				"leadout start min %d, sec %d, frame %d\n",
-			     single_toc.address2, single_toc.control2,
-			     single_toc.point2,
-			     bcd_to_int(single_toc.lead_out_start_msf[0]),
-			     bcd_to_int(single_toc.lead_out_start_msf[1]),
-			     bcd_to_int(single_toc.lead_out_start_msf[2]));
-			if (res_size > 18 && single_toc.pointb0 > 0xaf)
-				pr_debug(PFX "addb0 %01x, conb0 %01x, poib0 %02x, nextsession min %d, sec %d, frame %d\n"
-				     "#mode5_ptrs %02d, max_start_outer_leadout_msf min %d, sec %d, frame %d\n",
-				     single_toc.addressb0,
-				     single_toc.controlb0,
-				     single_toc.pointb0,
-				     bcd_to_int(single_toc.
-						next_poss_prog_area_msf
-						[0]),
-				     bcd_to_int(single_toc.
-						next_poss_prog_area_msf
-						[1]),
-				     bcd_to_int(single_toc.
-						next_poss_prog_area_msf
-						[2]),
-				     single_toc.num_mode_5_pointers,
-				     bcd_to_int(single_toc.
-						max_start_outer_leadout_msf
-						[0]),
-				     bcd_to_int(single_toc.
-						max_start_outer_leadout_msf
-						[1]),
-				     bcd_to_int(single_toc.
-						max_start_outer_leadout_msf
-						[2]));
-			if (res_size > 27 && single_toc.pointb1 > 0xaf)
-				pr_debug(PFX "addb1 %01x, conb1 %01x, poib1 %02x, %x %x %x %x #skipint_ptrs %d, #skiptrkassign %d %x\n",
-				     single_toc.addressb1,
-				     single_toc.controlb1,
-				     single_toc.pointb1,
-				     single_toc.dummyb0_1[0],
-				     single_toc.dummyb0_1[1],
-				     single_toc.dummyb0_1[2],
-				     single_toc.dummyb0_1[3],
-				     single_toc.num_skip_interval_pointers,
-				     single_toc.num_skip_track_assignments,
-				     single_toc.dummyb0_2);
-			if (res_size > 36 && single_toc.pointb2 > 0xaf)
-				pr_debug(PFX "addb2 %01x, conb2 %01x, poib2 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressb2,
-				     single_toc.controlb2,
-				     single_toc.pointb2,
-				     single_toc.tracksb2[0],
-				     single_toc.tracksb2[1],
-				     single_toc.tracksb2[2],
-				     single_toc.tracksb2[3],
-				     single_toc.tracksb2[4],
-				     single_toc.tracksb2[5],
-				     single_toc.tracksb2[6]);
-			if (res_size > 45 && single_toc.pointb3 > 0xaf)
-				pr_debug(PFX "addb3 %01x, conb3 %01x, poib3 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressb3,
-				     single_toc.controlb3,
-				     single_toc.pointb3,
-				     single_toc.tracksb3[0],
-				     single_toc.tracksb3[1],
-				     single_toc.tracksb3[2],
-				     single_toc.tracksb3[3],
-				     single_toc.tracksb3[4],
-				     single_toc.tracksb3[5],
-				     single_toc.tracksb3[6]);
-			if (res_size > 54 && single_toc.pointb4 > 0xaf)
-				pr_debug(PFX "addb4 %01x, conb4 %01x, poib4 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressb4,
-				     single_toc.controlb4,
-				     single_toc.pointb4,
-				     single_toc.tracksb4[0],
-				     single_toc.tracksb4[1],
-				     single_toc.tracksb4[2],
-				     single_toc.tracksb4[3],
-				     single_toc.tracksb4[4],
-				     single_toc.tracksb4[5],
-				     single_toc.tracksb4[6]);
-			if (res_size > 63 && single_toc.pointc0 > 0xaf)
-				pr_debug(PFX "addc0 %01x, conc0 %01x, poic0 %02x, %02x %02x %02x %02x %02x %02x %02x\n",
-				     single_toc.addressc0,
-				     single_toc.controlc0,
-				     single_toc.pointc0,
-				     single_toc.dummyc0[0],
-				     single_toc.dummyc0[1],
-				     single_toc.dummyc0[2],
-				     single_toc.dummyc0[3],
-				     single_toc.dummyc0[4],
-				     single_toc.dummyc0[5],
-				     single_toc.dummyc0[6]);
-#undef DEBUG
-#define DEBUG 0
-
-			sony_toc.lead_out_start_msf[0] =
-			    bcd_to_int(single_toc.lead_out_start_msf[0]);
-			sony_toc.lead_out_start_msf[1] =
-			    bcd_to_int(single_toc.lead_out_start_msf[1]);
-			sony_toc.lead_out_start_msf[2] =
-			    bcd_to_int(single_toc.lead_out_start_msf[2]);
-			sony_toc.lead_out_start_lba =
-			    single_toc.lead_out_start_lba =
-			    msf_to_log(sony_toc.lead_out_start_msf);
-
-			/* For points that do not exist, move the data over them
-			   to the right location. */
-			if (single_toc.pointb0 != 0xb0) {
-				memmove(((char *) &single_toc) + 27,
-					((char *) &single_toc) + 18,
-					res_size - 18);
-				res_size += 9;
-			} else if (res_size > 18) {
-				sony_toc.lead_out_start_msf[0] =
-				    bcd_to_int(single_toc.
-					       max_start_outer_leadout_msf
-					       [0]);
-				sony_toc.lead_out_start_msf[1] =
-				    bcd_to_int(single_toc.
-					       max_start_outer_leadout_msf
-					       [1]);
-				sony_toc.lead_out_start_msf[2] =
-				    bcd_to_int(single_toc.
-					       max_start_outer_leadout_msf
-					       [2]);
-				sony_toc.lead_out_start_lba =
-				    msf_to_log(sony_toc.
-					       lead_out_start_msf);
-			}
-			if (single_toc.pointb1 != 0xb1) {
-				memmove(((char *) &single_toc) + 36,
-					((char *) &single_toc) + 27,
-					res_size - 27);
-				res_size += 9;
-			}
-			if (single_toc.pointb2 != 0xb2) {
-				memmove(((char *) &single_toc) + 45,
-					((char *) &single_toc) + 36,
-					res_size - 36);
-				res_size += 9;
-			}
-			if (single_toc.pointb3 != 0xb3) {
-				memmove(((char *) &single_toc) + 54,
-					((char *) &single_toc) + 45,
-					res_size - 45);
-				res_size += 9;
-			}
-			if (single_toc.pointb4 != 0xb4) {
-				memmove(((char *) &single_toc) + 63,
-					((char *) &single_toc) + 54,
-					res_size - 54);
-				res_size += 9;
-			}
-			if (single_toc.pointc0 != 0xc0) {
-				memmove(((char *) &single_toc) + 72,
-					((char *) &single_toc) + 63,
-					res_size - 63);
-				res_size += 9;
-			}
-#if DEBUG
-			printk(PRINT_INFO PFX "start track lba %u,  "
-					"leadout start lba %u\n",
-			     single_toc.start_track_lba,
-			     single_toc.lead_out_start_lba);
-			{
-				int i;
-				for (i = 0;
-				     i <
-				     1 +
-				     bcd_to_int(single_toc.last_track_num)
-				     -
-				     bcd_to_int(single_toc.
-						first_track_num); i++) {
-					printk(KERN_INFO PFX "trk %02d: add 0x%01x, con 0x%01x,  track %02d, start min %02d, sec %02d, frame %02d\n",
-					     i,
-					     single_toc.tracks[i].address,
-					     single_toc.tracks[i].control,
-					     bcd_to_int(single_toc.
-							tracks[i].track),
-					     bcd_to_int(single_toc.
-							tracks[i].
-							track_start_msf
-							[0]),
-					     bcd_to_int(single_toc.
-							tracks[i].
-							track_start_msf
-							[1]),
-					     bcd_to_int(single_toc.
-							tracks[i].
-							track_start_msf
-							[2]));
-					if (mint >
-					    bcd_to_int(single_toc.
-						       tracks[i].track))
-						mint =
-						    bcd_to_int(single_toc.
-							       tracks[i].
-							       track);
-					if (maxt <
-					    bcd_to_int(single_toc.
-						       tracks[i].track))
-						maxt =
-						    bcd_to_int(single_toc.
-							       tracks[i].
-							       track);
-				}
-				printk(KERN_INFO PFX "min track number %d,  "
-						"max track number %d\n",
-				     mint, maxt);
-			}
-#endif
-
-			/* prepare a special table of contents for a CD-I disc. They don't have one. */
-			if (single_toc.disk_type == 0x10 &&
-			    single_toc.first_track_num == 2 &&
-			    single_toc.last_track_num == 2 /* CD-I */ ) {
-				sony_toc.tracks[totaltracks].address = 1;
-				sony_toc.tracks[totaltracks].control = 4;	/* force data tracks */
-				sony_toc.tracks[totaltracks].track = 1;
-				sony_toc.tracks[totaltracks].
-				    track_start_msf[0] = 0;
-				sony_toc.tracks[totaltracks].
-				    track_start_msf[1] = 2;
-				sony_toc.tracks[totaltracks].
-				    track_start_msf[2] = 0;
-				mint = maxt = 1;
-				totaltracks++;
-			} else
-				/* gather track entries from this session */
-			{
-				int i;
-				for (i = 0;
-				     i <
-				     1 +
-				     bcd_to_int(single_toc.last_track_num)
-				     -
-				     bcd_to_int(single_toc.
-						first_track_num);
-				     i++, totaltracks++) {
-					sony_toc.tracks[totaltracks].
-					    address =
-					    single_toc.tracks[i].address;
-					sony_toc.tracks[totaltracks].
-					    control =
-					    single_toc.tracks[i].control;
-					sony_toc.tracks[totaltracks].
-					    track =
-					    bcd_to_int(single_toc.
-						       tracks[i].track);
-					sony_toc.tracks[totaltracks].
-					    track_start_msf[0] =
-					    bcd_to_int(single_toc.
-						       tracks[i].
-						       track_start_msf[0]);
-					sony_toc.tracks[totaltracks].
-					    track_start_msf[1] =
-					    bcd_to_int(single_toc.
-						       tracks[i].
-						       track_start_msf[1]);
-					sony_toc.tracks[totaltracks].
-					    track_start_msf[2] =
-					    bcd_to_int(single_toc.
-						       tracks[i].
-						       track_start_msf[2]);
-					if (i == 0)
-						single_toc.
-						    start_track_lba =
-						    msf_to_log(sony_toc.
-							       tracks
-							       [totaltracks].
-							       track_start_msf);
-					if (mint >
-					    sony_toc.tracks[totaltracks].
-					    track)
-						mint =
-						    sony_toc.
-						    tracks[totaltracks].
-						    track;
-					if (maxt <
-					    sony_toc.tracks[totaltracks].
-					    track)
-						maxt =
-						    sony_toc.
-						    tracks[totaltracks].
-						    track;
-				}
-			}
-			sony_toc.first_track_num = mint;
-			sony_toc.last_track_num = maxt;
-			/* Disk type of last session wins. For example:
-			   CD-Extra has disk type 0 for the first session, so
-			   a dumb HiFi CD player thinks it is a plain audio CD.
-			   We are interested in the disk type of the last session,
-			   which is 0x20 (XA) for CD-Extra, so we can access the
-			   data track ... */
-			sony_toc.disk_type = single_toc.disk_type;
-			sony_toc.sessions = session;
-
-			/* don't believe everything :-) */
-			if (session == 1)
-				single_toc.start_track_lba = 0;
-			sony_toc.start_track_lba =
-			    single_toc.start_track_lba;
-
-			if (session > 1 && single_toc.pointb0 == 0xb0 &&
-			    sony_toc.lead_out_start_lba ==
-			    single_toc.lead_out_start_lba) {
-				break;
-			}
-
-			/* Let's not get carried away... */
-			if (session > 40) {
-				printk(KERN_NOTICE PFX "too many sessions: "
-						"%d\n", session);
-				break;
-			}
-			session++;
-		}
-		sony_toc.track_entries = totaltracks;
-		/* add one entry for the LAST track with track number CDROM_LEADOUT */
-		sony_toc.tracks[totaltracks].address = single_toc.address2;
-		sony_toc.tracks[totaltracks].control = single_toc.control2;
-		sony_toc.tracks[totaltracks].track = CDROM_LEADOUT;
-		sony_toc.tracks[totaltracks].track_start_msf[0] =
-		    sony_toc.lead_out_start_msf[0];
-		sony_toc.tracks[totaltracks].track_start_msf[1] =
-		    sony_toc.lead_out_start_msf[1];
-		sony_toc.tracks[totaltracks].track_start_msf[2] =
-		    sony_toc.lead_out_start_msf[2];
-
-		sony_toc_read = 1;
-
-		pr_debug(PFX "Disk session %d, start track: %d, "
-				"stop track: %d\n",
-		     session, single_toc.start_track_lba,
-		     single_toc.lead_out_start_lba);
-	}
-	pr_debug(PFX "Leaving %s\n", __FUNCTION__);
-}
-
-
-/*
- * Uniform cdrom interface function
- * return multisession offset and sector information
- */
-static int scd_get_last_session(struct cdrom_device_info *cdi,
-				struct cdrom_multisession *ms_info)
-{
-	if (ms_info == NULL)
-		return 1;
-
-	if (!sony_toc_read) {
-		if (down_interruptible(&sony_sem))
-			return -ERESTARTSYS;
-		sony_get_toc();
-		up(&sony_sem);
-	}
-
-	ms_info->addr_format = CDROM_LBA;
-	ms_info->addr.lba = sony_toc.start_track_lba;
-	ms_info->xa_flag = sony_toc.disk_type == SONY_XA_DISK_TYPE ||
-	    sony_toc.disk_type == 0x10 /* CDI */ ;
-
-	return 0;
-}
-
-/*
- * Search for a specific track in the table of contents.
- */
-static int find_track(int track)
-{
-	int i;
-
-	for (i = 0; i <= sony_toc.track_entries; i++) {
-		if (sony_toc.tracks[i].track == track) {
-			return i;
-		}
-	}
-
-	return -1;
-}
-
-
-/*
- * Read the subcode and put it in last_sony_subcode for future use.
- */
-static int read_subcode(void)
-{
-	unsigned int res_size;
-
-
-	do_sony_cd_cmd(SONY_REQ_SUBCODE_ADDRESS_CMD,
-		       NULL,
-		       0, (unsigned char *) &last_sony_subcode, &res_size);
-	if ((res_size < 2)
-	    || ((last_sony_subcode.exec_status[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Sony CDROM error %s (read_subcode)\n",
-		       translate_error(last_sony_subcode.exec_status[1]));
-		return -EIO;
-	}
-
-	last_sony_subcode.track_num =
-	    bcd_to_int(last_sony_subcode.track_num);
-	last_sony_subcode.index_num =
-	    bcd_to_int(last_sony_subcode.index_num);
-	last_sony_subcode.abs_msf[0] =
-	    bcd_to_int(last_sony_subcode.abs_msf[0]);
-	last_sony_subcode.abs_msf[1] =
-	    bcd_to_int(last_sony_subcode.abs_msf[1]);
-	last_sony_subcode.abs_msf[2] =
-	    bcd_to_int(last_sony_subcode.abs_msf[2]);
-
-	last_sony_subcode.rel_msf[0] =
-	    bcd_to_int(last_sony_subcode.rel_msf[0]);
-	last_sony_subcode.rel_msf[1] =
-	    bcd_to_int(last_sony_subcode.rel_msf[1]);
-	last_sony_subcode.rel_msf[2] =
-	    bcd_to_int(last_sony_subcode.rel_msf[2]);
-	return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * return the media catalog number found on some older audio cds
- */
-static int
-scd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
-	unsigned char resbuffer[2 + 14];
-	unsigned char *mcnp = mcn->medium_catalog_number;
-	unsigned char *resp = resbuffer + 3;
-	unsigned int res_size;
-
-	memset(mcn->medium_catalog_number, 0, 14);
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	do_sony_cd_cmd(SONY_REQ_UPC_EAN_CMD,
-		       NULL, 0, resbuffer, &res_size);
-	up(&sony_sem);
-	if ((res_size < 2) || ((resbuffer[0] & 0xf0) == 0x20));
-	else {
-		/* packed bcd to single ASCII digits */
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4) + '0';
-	}
-	*mcnp = '\0';
-	return 0;
-}
-
-
-/*
- * Get the subchannel info like the CDROMSUBCHNL command wants to see it.  If
- * the drive is playing, the subchannel needs to be read (since it would be
- * changing).  If the drive is paused or completed, the subcode information has
- * already been stored, just use that.  The ioctl call wants things in decimal
- * (not BCD), so all the conversions are done.
- */
-static int sony_get_subchnl_info(struct cdrom_subchnl *schi)
-{
-	/* Get attention stuff */
-	while (handle_sony_cd_attention());
-
-	sony_get_toc();
-	if (!sony_toc_read) {
-		return -EIO;
-	}
-
-	switch (sony_audio_status) {
-	case CDROM_AUDIO_NO_STATUS:
-	case CDROM_AUDIO_PLAY:
-		if (read_subcode() < 0) {
-			return -EIO;
-		}
-		break;
-
-	case CDROM_AUDIO_PAUSED:
-	case CDROM_AUDIO_COMPLETED:
-		break;
-
-#if 0
-	case CDROM_AUDIO_NO_STATUS:
-		schi->cdsc_audiostatus = sony_audio_status;
-		return 0;
-		break;
-#endif
-	case CDROM_AUDIO_INVALID:
-	case CDROM_AUDIO_ERROR:
-	default:
-		return -EIO;
-	}
-
-	schi->cdsc_audiostatus = sony_audio_status;
-	schi->cdsc_adr = last_sony_subcode.address;
-	schi->cdsc_ctrl = last_sony_subcode.control;
-	schi->cdsc_trk = last_sony_subcode.track_num;
-	schi->cdsc_ind = last_sony_subcode.index_num;
-	if (schi->cdsc_format == CDROM_MSF) {
-		schi->cdsc_absaddr.msf.minute =
-		    last_sony_subcode.abs_msf[0];
-		schi->cdsc_absaddr.msf.second =
-		    last_sony_subcode.abs_msf[1];
-		schi->cdsc_absaddr.msf.frame =
-		    last_sony_subcode.abs_msf[2];
-
-		schi->cdsc_reladdr.msf.minute =
-		    last_sony_subcode.rel_msf[0];
-		schi->cdsc_reladdr.msf.second =
-		    last_sony_subcode.rel_msf[1];
-		schi->cdsc_reladdr.msf.frame =
-		    last_sony_subcode.rel_msf[2];
-	} else if (schi->cdsc_format == CDROM_LBA) {
-		schi->cdsc_absaddr.lba =
-		    msf_to_log(last_sony_subcode.abs_msf);
-		schi->cdsc_reladdr.lba =
-		    msf_to_log(last_sony_subcode.rel_msf);
-	}
-
-	return 0;
-}
-
-/* Get audio data from the drive.  This is fairly complex because I
-   am looking for status and data at the same time, but if I get status
-   then I just look for data.  I need to get the status immediately so
-   the switch from audio to data tracks will happen quickly. */
-static void
-read_audio_data(char *buffer, unsigned char res_reg[], int *res_size)
-{
-	unsigned long retry_count;
-	int result_read;
-
-
-	res_reg[0] = 0;
-	res_reg[1] = 0;
-	*res_size = 0;
-	result_read = 0;
-
-	/* Wait for the drive to tell us we have something */
-	retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-      continue_read_audio_wait:
-	while (time_before(jiffies, retry_count) && !(is_data_ready())
-	       && !(is_result_ready() || result_read)) {
-		while (handle_sony_cd_attention());
-
-		sony_sleep();
-	}
-	if (!(is_data_ready())) {
-		if (is_result_ready() && !result_read) {
-			get_result(res_reg, res_size);
-
-			/* Read block status and continue waiting for data. */
-			if ((res_reg[0] & 0xf0) == 0x50) {
-				result_read = 1;
-				goto continue_read_audio_wait;
-			}
-			/* Invalid data from the drive.  Shut down the operation. */
-			else if ((res_reg[0] & 0xf0) != 0x20) {
-				printk(KERN_WARNING PFX "Got result that "
-						"should have been error: %d\n",
-				     res_reg[0]);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-			abort_read();
-		} else {
-			pr_debug(PFX "timeout out %d\n", __LINE__);
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_TIMEOUT_OP_ERR;
-			*res_size = 2;
-			abort_read();
-		}
-	} else {
-		clear_data_ready();
-
-		/* If data block, then get 2340 bytes offset by 12. */
-		if (sony_raw_data_mode) {
-			insb(sony_cd_read_reg, buffer + CD_XA_HEAD,
-			     CD_FRAMESIZE_RAW1);
-		} else {
-			/* Audio gets the whole 2352 bytes. */
-			insb(sony_cd_read_reg, buffer, CD_FRAMESIZE_RAW);
-		}
-
-		/* If I haven't already gotten the result, get it now. */
-		if (!result_read) {
-			/* Wait for the drive to tell us we have something */
-			retry_count = jiffies + SONY_JIFFIES_TIMEOUT;
-			while (time_before(jiffies, retry_count)
-			       && !(is_result_ready())) {
-				while (handle_sony_cd_attention());
-
-				sony_sleep();
-			}
-
-			if (!is_result_ready()) {
-				pr_debug(PFX "timeout out %d\n", __LINE__);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_TIMEOUT_OP_ERR;
-				*res_size = 2;
-				abort_read();
-				return;
-			} else {
-				get_result(res_reg, res_size);
-			}
-		}
-
-		if ((res_reg[0] & 0xf0) == 0x50) {
-			if ((res_reg[0] == SONY_NO_CIRC_ERR_BLK_STAT)
-			    || (res_reg[0] == SONY_NO_LECC_ERR_BLK_STAT)
-			    || (res_reg[0] == SONY_RECOV_LECC_ERR_BLK_STAT)
-			    || (res_reg[0] == SONY_NO_ERR_DETECTION_STAT)) {
-				/* Ok, nothing to do. */
-			} else {
-				printk(KERN_ERR PFX "Data block error: 0x%x\n",
-				       res_reg[0]);
-				res_reg[0] = 0x20;
-				res_reg[1] = SONY_BAD_DATA_ERR;
-				*res_size = 2;
-			}
-		} else if ((res_reg[0] & 0xf0) != 0x20) {
-			/* The drive gave me bad status, I don't know what to do.
-			   Reset the driver and return an error. */
-			printk(KERN_NOTICE PFX "Invalid block status: 0x%x\n",
-			       res_reg[0]);
-			restart_on_error();
-			res_reg[0] = 0x20;
-			res_reg[1] = SONY_BAD_DATA_ERR;
-			*res_size = 2;
-		}
-	}
-}
-
-/* Perform a raw data read.  This will automatically detect the
-   track type and read the proper data (audio or data). */
-static int read_audio(struct cdrom_read_audio *ra)
-{
-	int retval;
-	unsigned char params[2];
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned int cframe;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	if (!sony_spun_up)
-		scd_spinup();
-
-	/* Set the drive to do raw operations. */
-	params[0] = SONY_SD_DECODE_PARAM;
-	params[1] = 0x06 | sony_raw_data_mode;
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Unable to set decode params: 0x%2.2x\n",
-		       res_reg[1]);
-		retval = -EIO;
-		goto out_up;
-	}
-
-	/* From here down, we have to goto exit_read_audio instead of returning
-	   because the drive parameters have to be set back to data before
-	   return. */
-
-	retval = 0;
-	if (start_request(ra->addr.lba, ra->nframes)) {
-		retval = -EIO;
-		goto exit_read_audio;
-	}
-
-	/* For every requested frame. */
-	cframe = 0;
-	while (cframe < ra->nframes) {
-		read_audio_data(audio_buffer, res_reg, &res_size);
-		if ((res_reg[0] & 0xf0) == 0x20) {
-			if (res_reg[1] == SONY_BAD_DATA_ERR) {
-				printk(KERN_ERR PFX "Data error on audio "
-						"sector %d\n",
-				     ra->addr.lba + cframe);
-			} else if (res_reg[1] == SONY_ILL_TRACK_R_ERR) {
-				/* Illegal track type, change track types and start over. */
-				sony_raw_data_mode =
-				    (sony_raw_data_mode) ? 0 : 1;
-
-				/* Set the drive mode. */
-				params[0] = SONY_SD_DECODE_PARAM;
-				params[1] = 0x06 | sony_raw_data_mode;
-				do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-					       params,
-					       2, res_reg, &res_size);
-				if ((res_size < 2)
-				    || ((res_reg[0] & 0xf0) == 0x20)) {
-					printk(KERN_ERR PFX "Unable to set "
-						"decode params: 0x%2.2x\n",
-					     res_reg[1]);
-					retval = -EIO;
-					goto exit_read_audio;
-				}
-
-				/* Restart the request on the current frame. */
-				if (start_request
-				    (ra->addr.lba + cframe,
-				     ra->nframes - cframe)) {
-					retval = -EIO;
-					goto exit_read_audio;
-				}
-
-				/* Don't go back to the top because don't want to get into
-				   and infinite loop.  A lot of code gets duplicated, but
-				   that's no big deal, I don't guess. */
-				read_audio_data(audio_buffer, res_reg,
-						&res_size);
-				if ((res_reg[0] & 0xf0) == 0x20) {
-					if (res_reg[1] ==
-					    SONY_BAD_DATA_ERR) {
-						printk(KERN_ERR PFX "Data error"
-							" on audio sector %d\n",
-						     ra->addr.lba +
-						     cframe);
-					} else {
-						printk(KERN_ERR PFX "Error reading audio data on sector %d: %s\n",
-						     ra->addr.lba + cframe,
-						     translate_error
-						     (res_reg[1]));
-						retval = -EIO;
-						goto exit_read_audio;
-					}
-				} else if (copy_to_user(ra->buf +
-							       (CD_FRAMESIZE_RAW
-								* cframe),
-						        audio_buffer,
-							CD_FRAMESIZE_RAW)) {
-					retval = -EFAULT;
-					goto exit_read_audio;
-				}
-			} else {
-				printk(KERN_ERR PFX "Error reading audio "
-						"data on sector %d: %s\n",
-				     ra->addr.lba + cframe,
-				     translate_error(res_reg[1]));
-				retval = -EIO;
-				goto exit_read_audio;
-			}
-		} else if (copy_to_user(ra->buf + (CD_FRAMESIZE_RAW * cframe),
-					(char *)audio_buffer,
-					CD_FRAMESIZE_RAW)) {
-			retval = -EFAULT;
-			goto exit_read_audio;
-		}
-
-		cframe++;
-	}
-
-	get_result(res_reg, &res_size);
-	if ((res_reg[0] & 0xf0) == 0x20) {
-		printk(KERN_ERR PFX "Error return from audio read: %s\n",
-		       translate_error(res_reg[1]));
-		retval = -EIO;
-		goto exit_read_audio;
-	}
-
-      exit_read_audio:
-
-	/* Set the drive mode back to the proper one for the disk. */
-	params[0] = SONY_SD_DECODE_PARAM;
-	if (!sony_xa_mode) {
-		params[1] = 0x0f;
-	} else {
-		params[1] = 0x07;
-	}
-	do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-		       params, 2, res_reg, &res_size);
-	if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Unable to reset decode params: 0x%2.2x\n",
-		       res_reg[1]);
-		retval = -EIO;
-	}
-
- out_up:
-	up(&sony_sem);
-
-	return retval;
-}
-
-static int
-do_sony_cd_cmd_chk(const char *name,
-		   unsigned char cmd,
-		   unsigned char *params,
-		   unsigned int num_params,
-		   unsigned char *result_buffer, unsigned int *result_size)
-{
-	do_sony_cd_cmd(cmd, params, num_params, result_buffer,
-		       result_size);
-	if ((*result_size < 2) || ((result_buffer[0] & 0xf0) == 0x20)) {
-		printk(KERN_ERR PFX "Error %s (CDROM%s)\n",
-		       translate_error(result_buffer[1]), name);
-		return -EIO;
-	}
-	return 0;
-}
-
-/*
- * Uniform cdrom interface function
- * open the tray
- */
-static int scd_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	int retval;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	if (position == 1 /* open tray */ ) {
-		unsigned char res_reg[12];
-		unsigned int res_size;
-
-		do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
-			       &res_size);
-		do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		sony_audio_status = CDROM_AUDIO_INVALID;
-		retval = do_sony_cd_cmd_chk("EJECT", SONY_EJECT_CMD, NULL, 0,
-					  res_reg, &res_size);
-	} else {
-		if (0 == scd_spinup())
-			sony_spun_up = 1;
-		retval = 0;
-	}
-	up(&sony_sem);
-	return retval;
-}
-
-/*
- * The big ugly ioctl handler.
- */
-static int scd_audio_ioctl(struct cdrom_device_info *cdi,
-			   unsigned int cmd, void *arg)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned char params[7];
-	int i, retval;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	switch (cmd) {
-	case CDROMSTART:	/* Spin up the drive */
-		retval = do_sony_cd_cmd_chk("START", SONY_SPIN_UP_CMD, NULL,
-					  0, res_reg, &res_size);
-		break;
-
-	case CDROMSTOP:	/* Spin down the drive */
-		do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/*
-		 * Spin the drive down, ignoring the error if the disk was
-		 * already not spinning.
-		 */
-		sony_audio_status = CDROM_AUDIO_NO_STATUS;
-		retval = do_sony_cd_cmd_chk("STOP", SONY_SPIN_DOWN_CMD, NULL,
-					  0, res_reg, &res_size);
-		break;
-
-	case CDROMPAUSE:	/* Pause the drive */
-		if (do_sony_cd_cmd_chk
-		    ("PAUSE", SONY_AUDIO_STOP_CMD, NULL, 0, res_reg,
-		     &res_size)) {
-			retval = -EIO;
-			break;
-		}
-		/* Get the current position and save it for resuming */
-		if (read_subcode() < 0) {
-			retval = -EIO;
-			break;
-		}
-		cur_pos_msf[0] = last_sony_subcode.abs_msf[0];
-		cur_pos_msf[1] = last_sony_subcode.abs_msf[1];
-		cur_pos_msf[2] = last_sony_subcode.abs_msf[2];
-		sony_audio_status = CDROM_AUDIO_PAUSED;
-		retval = 0;
-		break;
-
-	case CDROMRESUME:	/* Start the drive after being paused */
-		if (sony_audio_status != CDROM_AUDIO_PAUSED) {
-			retval = -EINVAL;
-			break;
-		}
-
-		do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/* Start the drive at the saved position. */
-		params[1] = int_to_bcd(cur_pos_msf[0]);
-		params[2] = int_to_bcd(cur_pos_msf[1]);
-		params[3] = int_to_bcd(cur_pos_msf[2]);
-		params[4] = int_to_bcd(final_pos_msf[0]);
-		params[5] = int_to_bcd(final_pos_msf[1]);
-		params[6] = int_to_bcd(final_pos_msf[2]);
-		params[0] = 0x03;
-		if (do_sony_cd_cmd_chk
-		    ("RESUME", SONY_AUDIO_PLAYBACK_CMD, params, 7, res_reg,
-		     &res_size) < 0) {
-			retval = -EIO;
-			break;
-		}
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		retval = 0;
-		break;
-
-	case CDROMPLAYMSF:	/* Play starting at the given MSF address. */
-		do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		/* The parameters are given in int, must be converted */
-		for (i = 1; i < 7; i++) {
-			params[i] =
-			    int_to_bcd(((unsigned char *) arg)[i - 1]);
-		}
-		params[0] = 0x03;
-		if (do_sony_cd_cmd_chk
-		    ("PLAYMSF", SONY_AUDIO_PLAYBACK_CMD, params, 7,
-		     res_reg, &res_size) < 0) {
-			retval = -EIO;
-			break;
-		}
-
-		/* Save the final position for pauses and resumes */
-		final_pos_msf[0] = bcd_to_int(params[4]);
-		final_pos_msf[1] = bcd_to_int(params[5]);
-		final_pos_msf[2] = bcd_to_int(params[6]);
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		retval = 0;
-		break;
-
-	case CDROMREADTOCHDR:	/* Read the table of contents header */
-		{
-			struct cdrom_tochdr *hdr;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			hdr = (struct cdrom_tochdr *) arg;
-			hdr->cdth_trk0 = sony_toc.first_track_num;
-			hdr->cdth_trk1 = sony_toc.last_track_num;
-		}
-		retval = 0;
-		break;
-
-	case CDROMREADTOCENTRY:	/* Read a given table of contents entry */
-		{
-			struct cdrom_tocentry *entry;
-			int track_idx;
-			unsigned char *msf_val = NULL;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			entry = (struct cdrom_tocentry *) arg;
-
-			track_idx = find_track(entry->cdte_track);
-			if (track_idx < 0) {
-				retval = -EINVAL;
-				break;
-			}
-
-			entry->cdte_adr =
-			    sony_toc.tracks[track_idx].address;
-			entry->cdte_ctrl =
-			    sony_toc.tracks[track_idx].control;
-			msf_val =
-			    sony_toc.tracks[track_idx].track_start_msf;
-
-			/* Logical buffer address or MSF format requested? */
-			if (entry->cdte_format == CDROM_LBA) {
-				entry->cdte_addr.lba = msf_to_log(msf_val);
-			} else if (entry->cdte_format == CDROM_MSF) {
-				entry->cdte_addr.msf.minute = *msf_val;
-				entry->cdte_addr.msf.second =
-				    *(msf_val + 1);
-				entry->cdte_addr.msf.frame =
-				    *(msf_val + 2);
-			}
-		}
-		retval = 0;
-		break;
-
-	case CDROMPLAYTRKIND:	/* Play a track.  This currently ignores index. */
-		{
-			struct cdrom_ti *ti = (struct cdrom_ti *) arg;
-			int track_idx;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			if ((ti->cdti_trk0 < sony_toc.first_track_num)
-			    || (ti->cdti_trk0 > sony_toc.last_track_num)
-			    || (ti->cdti_trk1 < ti->cdti_trk0)) {
-				retval = -EINVAL;
-				break;
-			}
-
-			track_idx = find_track(ti->cdti_trk0);
-			if (track_idx < 0) {
-				retval = -EINVAL;
-				break;
-			}
-			params[1] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[0]);
-			params[2] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[1]);
-			params[3] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[2]);
-
-			/*
-			 * If we want to stop after the last track, use the lead-out
-			 * MSF to do that.
-			 */
-			if (ti->cdti_trk1 >= sony_toc.last_track_num) {
-				track_idx = find_track(CDROM_LEADOUT);
-			} else {
-				track_idx = find_track(ti->cdti_trk1 + 1);
-			}
-			if (track_idx < 0) {
-				retval = -EINVAL;
-				break;
-			}
-			params[4] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[0]);
-			params[5] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[1]);
-			params[6] =
-			    int_to_bcd(sony_toc.tracks[track_idx].
-				       track_start_msf[2]);
-			params[0] = 0x03;
-
-			do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg,
-				       &res_size);
-
-			do_sony_cd_cmd(SONY_AUDIO_PLAYBACK_CMD, params, 7,
-				       res_reg, &res_size);
-
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				printk(KERN_ERR PFX
-					"Params: %x %x %x %x %x %x %x\n",
-				       params[0], params[1], params[2],
-				       params[3], params[4], params[5],
-				       params[6]);
-				printk(KERN_ERR PFX
-					"Error %s (CDROMPLAYTRKIND)\n",
-				     translate_error(res_reg[1]));
-				retval = -EIO;
-				break;
-			}
-
-			/* Save the final position for pauses and resumes */
-			final_pos_msf[0] = bcd_to_int(params[4]);
-			final_pos_msf[1] = bcd_to_int(params[5]);
-			final_pos_msf[2] = bcd_to_int(params[6]);
-			sony_audio_status = CDROM_AUDIO_PLAY;
-			retval = 0;
-			break;
-		}
-
-	case CDROMVOLCTRL:	/* Volume control.  What volume does this change, anyway? */
-		{
-			struct cdrom_volctrl *volctrl =
-			    (struct cdrom_volctrl *) arg;
-
-			params[0] = SONY_SD_AUDIO_VOLUME;
-			params[1] = volctrl->channel0;
-			params[2] = volctrl->channel1;
-			retval = do_sony_cd_cmd_chk("VOLCTRL",
-						  SONY_SET_DRIVE_PARAM_CMD,
-						  params, 3, res_reg,
-						  &res_size);
-			break;
-		}
-	case CDROMSUBCHNL:	/* Get subchannel info */
-		retval = sony_get_subchnl_info((struct cdrom_subchnl *) arg);
-		break;
-
-	default:
-		retval = -EINVAL;
-		break;
-	}
-	up(&sony_sem);
-	return retval;
-}
-
-static int scd_read_audio(struct cdrom_device_info *cdi,
-			 unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int retval;
-
-	if (down_interruptible(&sony_sem))
-		return -ERESTARTSYS;
-	switch (cmd) {
-	case CDROMREADAUDIO:	/* Read 2352 byte audio tracks and 2340 byte
-				   raw data tracks. */
-		{
-			struct cdrom_read_audio ra;
-
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				retval = -EIO;
-				break;
-			}
-
-			if (copy_from_user(&ra, argp, sizeof(ra))) {
-				retval = -EFAULT;
-				break;
-			}
-
-			if (ra.nframes == 0) {
-				retval = 0;
-				break;
-			}
-
-			if (!access_ok(VERIFY_WRITE, ra.buf,
-					CD_FRAMESIZE_RAW * ra.nframes))
-				return -EFAULT;
-
-			if (ra.addr_format == CDROM_LBA) {
-				if ((ra.addr.lba >=
-				     sony_toc.lead_out_start_lba)
-				    || (ra.addr.lba + ra.nframes >=
-					sony_toc.lead_out_start_lba)) {
-					retval = -EINVAL;
-					break;
-				}
-			} else if (ra.addr_format == CDROM_MSF) {
-				if ((ra.addr.msf.minute >= 75)
-				    || (ra.addr.msf.second >= 60)
-				    || (ra.addr.msf.frame >= 75)) {
-					retval = -EINVAL;
-					break;
-				}
-
-				ra.addr.lba = ((ra.addr.msf.minute * 4500)
-					       + (ra.addr.msf.second * 75)
-					       + ra.addr.msf.frame);
-				if ((ra.addr.lba >=
-				     sony_toc.lead_out_start_lba)
-				    || (ra.addr.lba + ra.nframes >=
-					sony_toc.lead_out_start_lba)) {
-					retval = -EINVAL;
-					break;
-				}
-
-				/* I know, this can go negative on an unsigned.  However,
-				   the first thing done to the data is to add this value,
-				   so this should compensate and allow direct msf access. */
-				ra.addr.lba -= LOG_START_OFFSET;
-			} else {
-				retval = -EINVAL;
-				break;
-			}
-
-			retval = read_audio(&ra);
-			break;
-		}
-		retval = 0;
-		break;
-
-	default:
-		retval = -EINVAL;
-	}
-	up(&sony_sem);
-	return retval;
-}
-
-static int scd_spinup(void)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	int num_spin_ups;
-
-	num_spin_ups = 0;
-
-      respinup_on_open:
-	do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size);
-
-	/* The drive sometimes returns error 0.  I don't know why, but ignore
-	   it.  It seems to mean the drive has already done the operation. */
-	if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
-		printk(KERN_ERR PFX "%s error (scd_open, spin up)\n",
-		       translate_error(res_reg[1]));
-		return 1;
-	}
-
-	do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg, &res_size);
-
-	/* The drive sometimes returns error 0.  I don't know why, but ignore
-	   it.  It seems to mean the drive has already done the operation. */
-	if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) {
-		/* If the drive is already playing, it's ok.  */
-		if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR)
-		    || (res_reg[1] == 0)) {
-			return 0;
-		}
-
-		/* If the drive says it is not spun up (even though we just did it!)
-		   then retry the operation at least a few times. */
-		if ((res_reg[1] == SONY_NOT_SPIN_ERR)
-		    && (num_spin_ups < MAX_CDU31A_RETRIES)) {
-			num_spin_ups++;
-			goto respinup_on_open;
-		}
-
-		printk(KERN_ERR PFX "Error %s (scd_open, read toc)\n",
-		       translate_error(res_reg[1]));
-		do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
-			       &res_size);
-		return 1;
-	}
-	return 0;
-}
-
-/*
- * Open the drive for operations.  Spin the drive up and read the table of
- * contents if these have not already been done.
- */
-static int scd_open(struct cdrom_device_info *cdi, int purpose)
-{
-	unsigned char res_reg[12];
-	unsigned int res_size;
-	unsigned char params[2];
-
-	if (purpose == 1) {
-		/* Open for IOCTLs only - no media check */
-		sony_usage++;
-		return 0;
-	}
-
-	if (sony_usage == 0) {
-		if (scd_spinup() != 0)
-			return -EIO;
-		sony_get_toc();
-		if (!sony_toc_read) {
-			do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0,
-				       res_reg, &res_size);
-			return -EIO;
-		}
-
-		/* For XA on the CDU31A only, we have to do special reads.
-		   The CDU33A handles XA automagically. */
-		/* if (   (sony_toc.disk_type == SONY_XA_DISK_TYPE) */
-		if ((sony_toc.disk_type != 0x00)
-		    && (!is_double_speed)) {
-			params[0] = SONY_SD_DECODE_PARAM;
-			params[1] = 0x07;
-			do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-				       params, 2, res_reg, &res_size);
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				printk(KERN_WARNING PFX "Unable to set "
-					"XA params: 0x%2.2x\n", res_reg[1]);
-			}
-			sony_xa_mode = 1;
-		}
-		/* A non-XA disk.  Set the parms back if necessary. */
-		else if (sony_xa_mode) {
-			params[0] = SONY_SD_DECODE_PARAM;
-			params[1] = 0x0f;
-			do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD,
-				       params, 2, res_reg, &res_size);
-			if ((res_size < 2)
-			    || ((res_reg[0] & 0xf0) == 0x20)) {
-				printk(KERN_WARNING PFX "Unable to reset "
-					"XA params: 0x%2.2x\n", res_reg[1]);
-			}
-			sony_xa_mode = 0;
-		}
-
-		sony_spun_up = 1;
-	}
-
-	sony_usage++;
-
-	return 0;
-}
-
-
-/*
- * Close the drive.  Spin it down if no task is using it.  The spin
- * down will fail if playing audio, so audio play is OK.
- */
-static void scd_release(struct cdrom_device_info *cdi)
-{
-	if (sony_usage == 1) {
-		unsigned char res_reg[12];
-		unsigned int res_size;
-
-		do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg,
-			       &res_size);
-
-		sony_spun_up = 0;
-	}
-	sony_usage--;
-}
-
-static struct cdrom_device_ops scd_dops = {
-	.open			= scd_open,
-	.release		= scd_release,
-	.drive_status		= scd_drive_status,
-	.media_changed		= scd_media_changed,
-	.tray_move		= scd_tray_move,
-	.lock_door		= scd_lock_door,
-	.select_speed		= scd_select_speed,
-	.get_last_session	= scd_get_last_session,
-	.get_mcn		= scd_get_mcn,
-	.reset			= scd_reset,
-	.audio_ioctl		= scd_audio_ioctl,
-	.capability		= CDC_OPEN_TRAY | CDC_CLOSE_TRAY | CDC_LOCK |
-				  CDC_SELECT_SPEED | CDC_MULTI_SESSION |
-				  CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO |
-				  CDC_RESET | CDC_DRIVE_STATUS,
-	.n_minors		= 1,
-};
-
-static struct cdrom_device_info scd_info = {
-	.ops		= &scd_dops,
-	.speed		= 2,
-	.capacity	= 1,
-	.name		= "cdu31a"
-};
-
-static int scd_block_open(struct inode *inode, struct file *file)
-{
-	return cdrom_open(&scd_info, inode, file);
-}
-
-static int scd_block_release(struct inode *inode, struct file *file)
-{
-	return cdrom_release(&scd_info, file);
-}
-
-static int scd_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	int retval;
-
-	/* The eject and close commands should be handled by Uniform CD-ROM
-	 * driver - but I always got hard lockup instead of eject
-	 * until I put this here.
-	 */
-	switch (cmd) {
-		case CDROMEJECT:
-			scd_lock_door(&scd_info, 0);
-			retval = scd_tray_move(&scd_info, 1);
-			break;
-		case CDROMCLOSETRAY:
-			retval = scd_tray_move(&scd_info, 0);
-			break;
-		case CDROMREADAUDIO:
-			retval = scd_read_audio(&scd_info, CDROMREADAUDIO, arg);
-			break;
-		default:
-			retval = cdrom_ioctl(file, &scd_info, inode, cmd, arg);
-	}
-	return retval;
-}
-
-static int scd_block_media_changed(struct gendisk *disk)
-{
-	return cdrom_media_changed(&scd_info);
-}
-
-static struct block_device_operations scd_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= scd_block_open,
-	.release	= scd_block_release,
-	.ioctl		= scd_block_ioctl,
-	.media_changed	= scd_block_media_changed,
-};
-
-static struct gendisk *scd_gendisk;
-
-/* The different types of disc loading mechanisms supported */
-static char *load_mech[] __initdata =
-    { "caddy", "tray", "pop-up", "unknown" };
-
-static int __init
-get_drive_configuration(unsigned short base_io,
-			unsigned char res_reg[], unsigned int *res_size)
-{
-	unsigned long retry_count;
-
-
-	if (!request_region(base_io, 4, "cdu31a"))
-		return 0;
-
-	/* Set the base address */
-	cdu31a_port = base_io;
-
-	/* Set up all the register locations */
-	sony_cd_cmd_reg = cdu31a_port + SONY_CMD_REG_OFFSET;
-	sony_cd_param_reg = cdu31a_port + SONY_PARAM_REG_OFFSET;
-	sony_cd_write_reg = cdu31a_port + SONY_WRITE_REG_OFFSET;
-	sony_cd_control_reg = cdu31a_port + SONY_CONTROL_REG_OFFSET;
-	sony_cd_status_reg = cdu31a_port + SONY_STATUS_REG_OFFSET;
-	sony_cd_result_reg = cdu31a_port + SONY_RESULT_REG_OFFSET;
-	sony_cd_read_reg = cdu31a_port + SONY_READ_REG_OFFSET;
-	sony_cd_fifost_reg = cdu31a_port + SONY_FIFOST_REG_OFFSET;
-
-	/*
-	 * Check to see if anything exists at the status register location.
-	 * I don't know if this is a good way to check, but it seems to work
-	 * ok for me.
-	 */
-	if (read_status_register() != 0xff) {
-		/*
-		 * Reset the drive and wait for attention from it (to say it's reset).
-		 * If you don't wait, the next operation will probably fail.
-		 */
-		reset_drive();
-		retry_count = jiffies + SONY_RESET_TIMEOUT;
-		while (time_before(jiffies, retry_count)
-		       && (!is_attention())) {
-			sony_sleep();
-		}
-
-#if 0
-		/* If attention is never seen probably not a CDU31a present */
-		if (!is_attention()) {
-			res_reg[0] = 0x20;
-			goto out_err;
-		}
-#endif
-
-		/*
-		 * Get the drive configuration.
-		 */
-		do_sony_cd_cmd(SONY_REQ_DRIVE_CONFIG_CMD,
-			       NULL,
-			       0, (unsigned char *) res_reg, res_size);
-		if (*res_size <= 2 || (res_reg[0] & 0xf0) != 0)
-			goto out_err;
-		return 1;
-	}
-
-	/* Return an error */
-	res_reg[0] = 0x20;
-out_err:
-	release_region(cdu31a_port, 4);
-	cdu31a_port = 0;
-	return 0;
-}
-
-#ifndef MODULE
-/*
- * Set up base I/O and interrupts, called from main.c.
- */
-
-static int __init cdu31a_setup(char *strings)
-{
-	int ints[4];
-
-	(void) get_options(strings, ARRAY_SIZE(ints), ints);
-
-	if (ints[0] > 0) {
-		cdu31a_port = ints[1];
-	}
-	if (ints[0] > 1) {
-		cdu31a_irq = ints[2];
-	}
-	if ((strings != NULL) && (*strings != '\0')) {
-		if (strcmp(strings, "PAS") == 0) {
-			sony_pas_init = 1;
-		} else {
-			printk(KERN_NOTICE PFX "Unknown interface type: %s\n",
-			       strings);
-		}
-	}
-
-	return 1;
-}
-
-__setup("cdu31a=", cdu31a_setup);
-
-#endif
-
-/*
- * Initialize the driver.
- */
-int __init cdu31a_init(void)
-{
-	struct s_sony_drive_config drive_config;
-	struct gendisk *disk;
-	int deficiency = 0;
-	unsigned int res_size;
-	char msg[255];
-	char buf[40];
-	int i;
-	int tmp_irq;
-
-	/*
-	 * According to Alex Freed (freed@europa.orion.adobe.com), this is
-	 * required for the Fusion CD-16 package.  If the sound driver is
-	 * loaded, it should work fine, but just in case...
-	 *
-	 * The following turn on the CD-ROM interface for a Fusion CD-16.
-	 */
-	if (sony_pas_init) {
-		outb(0xbc, 0x9a01);
-		outb(0xe2, 0x9a01);
-	}
-
-	/* Setting the base I/O address to 0xffff will disable it. */
-	if (cdu31a_port == 0xffff)
-		goto errout3;
-
-	if (cdu31a_port != 0) {
-		/* Need IRQ 0 because we can't sleep here. */
-		tmp_irq = cdu31a_irq;
-		cdu31a_irq = 0;
-		if (!get_drive_configuration(cdu31a_port,
-					    drive_config.exec_status,
-					    &res_size))
-			goto errout3;
-		cdu31a_irq = tmp_irq;
-	} else {
-		cdu31a_irq = 0;
-		for (i = 0; cdu31a_addresses[i].base; i++) {
-			if (get_drive_configuration(cdu31a_addresses[i].base,
-						     drive_config.exec_status,
-						     &res_size)) {
-				cdu31a_irq = cdu31a_addresses[i].int_num;
-				break;
-			}
-		}
-		if (!cdu31a_port)
-			goto errout3;
-	}
-
-	if (register_blkdev(MAJOR_NR, "cdu31a"))
-		goto errout2;
-
-	disk = alloc_disk(1);
-	if (!disk)
-		goto errout1;
-	disk->major = MAJOR_NR;
-	disk->first_minor = 0;
-	sprintf(disk->disk_name, "cdu31a");
-	disk->fops = &scd_bdops;
-	disk->flags = GENHD_FL_CD;
-
-	if (SONY_HWC_DOUBLE_SPEED(drive_config))
-		is_double_speed = 1;
-
-	tmp_irq = cdu31a_irq;	/* Need IRQ 0 because we can't sleep here. */
-	cdu31a_irq = 0;
-
-	sony_speed = is_double_speed; /* Set 2X drives to 2X by default */
-	set_drive_params(sony_speed);
-
-	cdu31a_irq = tmp_irq;
-
-	if (cdu31a_irq > 0) {
-		if (request_irq
-		    (cdu31a_irq, cdu31a_interrupt, IRQF_DISABLED,
-		     "cdu31a", NULL)) {
-			printk(KERN_WARNING PFX "Unable to grab IRQ%d for "
-					"the CDU31A driver\n", cdu31a_irq);
-			cdu31a_irq = 0;
-		}
-	}
-
-	sprintf(msg, "Sony I/F CDROM : %8.8s %16.16s %8.8s\n",
-		drive_config.vendor_id,
-		drive_config.product_id,
-		drive_config.product_rev_level);
-	sprintf(buf, "  Capabilities: %s",
-		load_mech[SONY_HWC_GET_LOAD_MECH(drive_config)]);
-	strcat(msg, buf);
-	if (SONY_HWC_AUDIO_PLAYBACK(drive_config))
-		strcat(msg, ", audio");
-	else
-		deficiency |= CDC_PLAY_AUDIO;
-	if (SONY_HWC_EJECT(drive_config))
-		strcat(msg, ", eject");
-	else
-		deficiency |= CDC_OPEN_TRAY;
-	if (SONY_HWC_LED_SUPPORT(drive_config))
-		strcat(msg, ", LED");
-	if (SONY_HWC_ELECTRIC_VOLUME(drive_config))
-		strcat(msg, ", elec. Vol");
-	if (SONY_HWC_ELECTRIC_VOLUME_CTL(drive_config))
-		strcat(msg, ", sep. Vol");
-	if (is_double_speed)
-		strcat(msg, ", double speed");
-	else
-		deficiency |= CDC_SELECT_SPEED;
-	if (cdu31a_irq > 0) {
-		sprintf(buf, ", irq %d", cdu31a_irq);
-		strcat(msg, buf);
-	}
-	strcat(msg, "\n");
-	printk(KERN_INFO PFX "%s",msg);
-
-	cdu31a_queue = blk_init_queue(do_cdu31a_request, &cdu31a_lock);
-	if (!cdu31a_queue)
-		goto errout0;
-	blk_queue_hardsect_size(cdu31a_queue, 2048);
-
-	init_timer(&cdu31a_abort_timer);
-	cdu31a_abort_timer.function = handle_abort_timeout;
-
-	scd_info.mask = deficiency;
-	scd_gendisk = disk;
-	if (register_cdrom(&scd_info))
-		goto err;
-	disk->queue = cdu31a_queue;
-	add_disk(disk);
-
-	disk_changed = 1;
-	return 0;
-
-err:
-	blk_cleanup_queue(cdu31a_queue);
-errout0:
-	if (cdu31a_irq)
-		free_irq(cdu31a_irq, NULL);
-	printk(KERN_ERR PFX "Unable to register with Uniform cdrom driver\n");
-	put_disk(disk);
-errout1:
-	if (unregister_blkdev(MAJOR_NR, "cdu31a")) {
-		printk(KERN_WARNING PFX "Can't unregister block device\n");
-	}
-errout2:
-	release_region(cdu31a_port, 4);
-errout3:
-	return -EIO;
-}
-
-
-static void __exit cdu31a_exit(void)
-{
-	del_gendisk(scd_gendisk);
-	put_disk(scd_gendisk);
-	if (unregister_cdrom(&scd_info)) {
-		printk(KERN_WARNING PFX "Can't unregister from Uniform "
-				"cdrom driver\n");
-		return;
-	}
-	if ((unregister_blkdev(MAJOR_NR, "cdu31a") == -EINVAL)) {
-		printk(KERN_WARNING PFX "Can't unregister\n");
-		return;
-	}
-
-	blk_cleanup_queue(cdu31a_queue);
-
-	if (cdu31a_irq > 0)
-		free_irq(cdu31a_irq, NULL);
-
-	release_region(cdu31a_port, 4);
-	printk(KERN_INFO PFX "module released.\n");
-}
-
-#ifdef MODULE
-module_init(cdu31a_init);
-#endif
-module_exit(cdu31a_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(CDU31A_CDROM_MAJOR);
diff --git a/drivers/cdrom/cdu31a.h b/drivers/cdrom/cdu31a.h
deleted file mode 100644
index 61d4768c412e..000000000000
--- a/drivers/cdrom/cdu31a.h
+++ /dev/null
@@ -1,411 +0,0 @@
-/*
- * Definitions for a Sony interface CDROM drive.
- *
- * Corey Minyard (minyard@wf-rch.cirr.com)
- *
- *  Copyright (C) 1993  Corey Minyard
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * General defines.
- */
-#define SONY_XA_DISK_TYPE 0x20
-
-/*
- * Offsets (from the base address) and bits for the various write registers
- * of the drive.
- */
-#define SONY_CMD_REG_OFFSET     0
-#define SONY_PARAM_REG_OFFSET   1
-#define SONY_WRITE_REG_OFFSET   2
-#define SONY_CONTROL_REG_OFFSET 3
-#       define SONY_ATTN_CLR_BIT        0x01
-#       define SONY_RES_RDY_CLR_BIT     0x02
-#       define SONY_DATA_RDY_CLR_BIT    0x04
-#       define SONY_ATTN_INT_EN_BIT     0x08
-#       define SONY_RES_RDY_INT_EN_BIT  0x10
-#       define SONY_DATA_RDY_INT_EN_BIT 0x20
-#       define SONY_PARAM_CLR_BIT       0x40
-#       define SONY_DRIVE_RESET_BIT     0x80
-
-/*
- * Offsets (from the base address) and bits for the various read registers
- * of the drive.
- */
-#define SONY_STATUS_REG_OFFSET  0
-#       define SONY_ATTN_BIT            0x01
-#       define SONY_RES_RDY_BIT         0x02
-#       define SONY_DATA_RDY_BIT        0x04
-#       define SONY_ATTN_INT_ST_BIT     0x08
-#       define SONY_RES_RDY_INT_ST_BIT  0x10
-#       define SONY_DATA_RDY_INT_ST_BIT 0x20
-#       define SONY_DATA_REQUEST_BIT    0x40
-#       define SONY_BUSY_BIT            0x80
-#define SONY_RESULT_REG_OFFSET  1
-#define SONY_READ_REG_OFFSET    2
-#define SONY_FIFOST_REG_OFFSET  3
-#       define SONY_PARAM_WRITE_RDY_BIT 0x01
-#       define SONY_PARAM_REG_EMPTY_BIT 0x02
-#       define SONY_RES_REG_NOT_EMP_BIT 0x04
-#       define SONY_RES_REG_FULL_BIT    0x08
-
-#define LOG_START_OFFSET        150     /* Offset of first logical sector */
-
-#define SONY_DETECT_TIMEOUT	(8*HZ/10) /* Maximum amount of time
-                                           that drive detection code
-                                           will wait for response
-                                           from drive (in 1/100th's
-                                           of seconds). */
- 
-#define SONY_JIFFIES_TIMEOUT    (10*HZ)	/* Maximum number of times the
-                                           drive will wait/try for an
-                                           operation */
-#define SONY_RESET_TIMEOUT      HZ	/* Maximum number of times the
-                                           drive will wait/try a reset
-                                           operation */
-#define SONY_READY_RETRIES      20000   /* How many times to retry a
-                                           spin waiting for a register
-                                           to come ready */
-
-#define MAX_CDU31A_RETRIES      3       /* How many times to retry an
-                                           operation */
-
-/* Commands to request or set drive control parameters and disc information */
-#define SONY_REQ_DRIVE_CONFIG_CMD       0x00    /* Returns s_sony_drive_config */
-#define SONY_REQ_DRIVE_MODE_CMD         0x01
-#define SONY_REQ_DRIVE_PARAM_CMD        0x02
-#define SONY_REQ_MECH_STATUS_CMD        0x03
-#define SONY_REQ_AUDIO_STATUS_CMD       0x04
-#define SONY_SET_DRIVE_PARAM_CMD        0x10
-#define SONY_REQ_TOC_DATA_CMD           0x20    /* Returns s_sony_toc */
-#define SONY_REQ_SUBCODE_ADDRESS_CMD    0x21    /* Returns s_sony_subcode */
-#define SONY_REQ_UPC_EAN_CMD            0x22
-#define SONY_REQ_ISRC_CMD               0x23
-#define SONY_REQ_TOC_DATA_SPEC_CMD      0x24    /* Returns s_sony_session_toc */
-
-/* Commands to request information from the drive */
-#define SONY_READ_TOC_CMD               0x30    /* let the drive firmware grab the TOC */
-#define SONY_SEEK_CMD                   0x31
-#define SONY_READ_CMD                   0x32
-#define SONY_READ_BLKERR_STAT_CMD       0x34
-#define SONY_ABORT_CMD                  0x35
-#define SONY_READ_TOC_SPEC_CMD          0x36
-
-/* Commands to control audio */
-#define SONY_AUDIO_PLAYBACK_CMD         0x40
-#define SONY_AUDIO_STOP_CMD             0x41
-#define SONY_AUDIO_SCAN_CMD             0x42
-
-/* Miscellaneous control commands */
-#define SONY_EJECT_CMD                  0x50
-#define SONY_SPIN_UP_CMD                0x51
-#define SONY_SPIN_DOWN_CMD              0x52
-
-/* Diagnostic commands */
-#define SONY_WRITE_BUFFER_CMD           0x60
-#define SONY_READ_BUFFER_CMD            0x61
-#define SONY_DIAGNOSTICS_CMD            0x62
-
-
-/*
- * The following are command parameters for the set drive parameter command
- */
-#define SONY_SD_DECODE_PARAM            0x00
-#define SONY_SD_INTERFACE_PARAM         0x01
-#define SONY_SD_BUFFERING_PARAM         0x02
-#define SONY_SD_AUDIO_PARAM             0x03
-#define SONY_SD_AUDIO_VOLUME            0x04
-#define SONY_SD_MECH_CONTROL            0x05
-#define SONY_SD_AUTO_SPIN_DOWN_TIME     0x06
-
-/*
- * The following are parameter bits for the mechanical control command
- */
-#define SONY_AUTO_SPIN_UP_BIT           0x01
-#define SONY_AUTO_EJECT_BIT             0x02
-#define SONY_DOUBLE_SPEED_BIT           0x04
-
-/*
- * The following extract information from the drive configuration about
- * the drive itself.
- */
-#define SONY_HWC_GET_LOAD_MECH(c)       (c.hw_config[0] & 0x03)
-#define SONY_HWC_EJECT(c)               (c.hw_config[0] & 0x04)
-#define SONY_HWC_LED_SUPPORT(c)         (c.hw_config[0] & 0x08)
-#define SONY_HWC_DOUBLE_SPEED(c)        (c.hw_config[0] & 0x10)
-#define SONY_HWC_GET_BUF_MEM_SIZE(c)    ((c.hw_config[0] & 0xc0) >> 6)
-#define SONY_HWC_AUDIO_PLAYBACK(c)      (c.hw_config[1] & 0x01)
-#define SONY_HWC_ELECTRIC_VOLUME(c)     (c.hw_config[1] & 0x02)
-#define SONY_HWC_ELECTRIC_VOLUME_CTL(c) (c.hw_config[1] & 0x04)
-
-#define SONY_HWC_CADDY_LOAD_MECH        0x00
-#define SONY_HWC_TRAY_LOAD_MECH         0x01
-#define SONY_HWC_POPUP_LOAD_MECH        0x02
-#define SONY_HWC_UNKWN_LOAD_MECH        0x03
-
-#define SONY_HWC_8KB_BUFFER             0x00
-#define SONY_HWC_32KB_BUFFER            0x01
-#define SONY_HWC_64KB_BUFFER            0x02
-#define SONY_HWC_UNKWN_BUFFER           0x03
-
-/*
- * This is the complete status returned from the drive configuration request
- * command.
- */
-struct s_sony_drive_config
-{
-   unsigned char exec_status[2];
-   char vendor_id[8];
-   char product_id[16];
-   char product_rev_level[8];
-   unsigned char hw_config[2];
-};
-
-/* The following is returned from the request subcode address command */
-struct s_sony_subcode
-{
-   unsigned char exec_status[2];
-   unsigned char address        :4;
-   unsigned char control        :4;
-   unsigned char track_num;
-   unsigned char index_num;
-   unsigned char rel_msf[3];
-   unsigned char reserved1;
-   unsigned char abs_msf[3];
-};
-
-#define MAX_TRACKS 100	/* The maximum tracks a disk may have. */
-/*
- * The following is returned from the request TOC (Table Of Contents) command.
- * (last_track_num-first_track_num+1) values are valid in tracks.
- */
-struct s_sony_toc
-{
-   unsigned char exec_status[2];
-   unsigned char address0       :4;
-   unsigned char control0       :4;
-   unsigned char point0;
-   unsigned char first_track_num;
-   unsigned char disk_type;
-   unsigned char dummy0;
-   unsigned char address1       :4;
-   unsigned char control1       :4;
-   unsigned char point1;
-   unsigned char last_track_num;
-   unsigned char dummy1;
-   unsigned char dummy2;
-   unsigned char address2       :4;
-   unsigned char control2       :4;
-   unsigned char point2;
-   unsigned char lead_out_start_msf[3];
-   struct
-   {
-      unsigned char address     :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[MAX_TRACKS];
-
-   unsigned int lead_out_start_lba;
-};
-
-struct s_sony_session_toc
-{
-   unsigned char exec_status[2];
-   unsigned char session_number;
-   unsigned char address0       :4;
-   unsigned char control0       :4;
-   unsigned char point0;
-   unsigned char first_track_num;
-   unsigned char disk_type;
-   unsigned char dummy0;
-   unsigned char address1       :4;
-   unsigned char control1       :4;
-   unsigned char point1;
-   unsigned char last_track_num;
-   unsigned char dummy1;
-   unsigned char dummy2;
-   unsigned char address2       :4;
-   unsigned char control2       :4;
-   unsigned char point2;
-   unsigned char lead_out_start_msf[3];
-   unsigned char addressb0      :4;
-   unsigned char controlb0      :4;
-   unsigned char pointb0;
-   unsigned char next_poss_prog_area_msf[3];
-   unsigned char num_mode_5_pointers;
-   unsigned char max_start_outer_leadout_msf[3];
-   unsigned char addressb1      :4;
-   unsigned char controlb1      :4;
-   unsigned char pointb1;
-   unsigned char dummyb0_1[4];
-   unsigned char num_skip_interval_pointers;
-   unsigned char num_skip_track_assignments;
-   unsigned char dummyb0_2;
-   unsigned char addressb2      :4;
-   unsigned char controlb2      :4;
-   unsigned char pointb2;
-   unsigned char tracksb2[7];
-   unsigned char addressb3      :4;
-   unsigned char controlb3      :4;
-   unsigned char pointb3;
-   unsigned char tracksb3[7];
-   unsigned char addressb4      :4;
-   unsigned char controlb4      :4;
-   unsigned char pointb4;
-   unsigned char tracksb4[7];
-   unsigned char addressc0      :4;
-   unsigned char controlc0      :4;
-   unsigned char pointc0;
-   unsigned char dummyc0[7];
-   struct
-   {
-      unsigned char address     :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[MAX_TRACKS];
-
-   unsigned int start_track_lba;
-   unsigned int lead_out_start_lba;
-   unsigned int mint;
-   unsigned int maxt;
-};
-
-struct s_all_sessions_toc
-{
-   unsigned char sessions;
-   unsigned int track_entries;
-   unsigned char first_track_num;
-   unsigned char last_track_num;
-   unsigned char disk_type;
-   unsigned char lead_out_start_msf[3];
-   struct
-   {
-      unsigned char address     :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[MAX_TRACKS];
-
-   unsigned int start_track_lba;
-   unsigned int lead_out_start_lba;
-};
-
-
-/*
- * The following are errors returned from the drive.
- */
-
-/* Command error group */
-#define SONY_ILL_CMD_ERR                0x10
-#define SONY_ILL_PARAM_ERR              0x11
-
-/* Mechanism group */
-#define SONY_NOT_LOAD_ERR               0x20
-#define SONY_NO_DISK_ERR                0x21
-#define SONY_NOT_SPIN_ERR               0x22
-#define SONY_SPIN_ERR                   0x23
-#define SONY_SPINDLE_SERVO_ERR          0x25
-#define SONY_FOCUS_SERVO_ERR            0x26
-#define SONY_EJECT_MECH_ERR             0x29
-#define SONY_AUDIO_PLAYING_ERR          0x2a
-#define SONY_EMERGENCY_EJECT_ERR        0x2c
-
-/* Seek error group */
-#define SONY_FOCUS_ERR                  0x30
-#define SONY_FRAME_SYNC_ERR             0x31
-#define SONY_SUBCODE_ADDR_ERR           0x32
-#define SONY_BLOCK_SYNC_ERR             0x33
-#define SONY_HEADER_ADDR_ERR            0x34
-
-/* Read error group */
-#define SONY_ILL_TRACK_R_ERR            0x40
-#define SONY_MODE_0_R_ERR               0x41
-#define SONY_ILL_MODE_R_ERR             0x42
-#define SONY_ILL_BLOCK_SIZE_R_ERR       0x43
-#define SONY_MODE_R_ERR                 0x44
-#define SONY_FORM_R_ERR                 0x45
-#define SONY_LEAD_OUT_R_ERR             0x46
-#define SONY_BUFFER_OVERRUN_R_ERR       0x47
-
-/* Data error group */
-#define SONY_UNREC_CIRC_ERR             0x53
-#define SONY_UNREC_LECC_ERR             0x57
-
-/* Subcode error group */
-#define SONY_NO_TOC_ERR                 0x60
-#define SONY_SUBCODE_DATA_NVAL_ERR      0x61
-#define SONY_FOCUS_ON_TOC_READ_ERR      0x63
-#define SONY_FRAME_SYNC_ON_TOC_READ_ERR 0x64
-#define SONY_TOC_DATA_ERR               0x65
-
-/* Hardware failure group */
-#define SONY_HW_FAILURE_ERR             0x70
-#define SONY_LEAD_IN_A_ERR              0x91
-#define SONY_LEAD_OUT_A_ERR             0x92
-#define SONY_DATA_TRACK_A_ERR           0x93
-
-/*
- * The following are returned from the Read With Block Error Status command.
- * They are not errors but information (Errors from the 0x5x group above may
- * also be returned
- */
-#define SONY_NO_CIRC_ERR_BLK_STAT       0x50
-#define SONY_NO_LECC_ERR_BLK_STAT       0x54
-#define SONY_RECOV_LECC_ERR_BLK_STAT    0x55
-#define SONY_NO_ERR_DETECTION_STAT      0x59
-
-/* 
- * The following is not an error returned by the drive, but by the code
- * that talks to the drive.  It is returned because of a timeout.
- */
-#define SONY_TIMEOUT_OP_ERR             0x01
-#define SONY_SIGNAL_OP_ERR              0x02
-#define SONY_BAD_DATA_ERR               0x03
-
-
-/*
- * The following are attention code for asynchronous events from the drive.
- */
-
-/* Standard attention group */
-#define SONY_EMER_EJECT_ATTN            0x2c
-#define SONY_HW_FAILURE_ATTN            0x70
-#define SONY_MECH_LOADED_ATTN           0x80
-#define SONY_EJECT_PUSHED_ATTN          0x81
-
-/* Audio attention group */
-#define SONY_AUDIO_PLAY_DONE_ATTN       0x90
-#define SONY_LEAD_IN_ERR_ATTN           0x91
-#define SONY_LEAD_OUT_ERR_ATTN          0x92
-#define SONY_DATA_TRACK_ERR_ATTN        0x93
-#define SONY_AUDIO_PLAYBACK_ERR_ATTN    0x94
-
-/* Auto spin up group */
-#define SONY_SPIN_UP_COMPLETE_ATTN      0x24
-#define SONY_SPINDLE_SERVO_ERR_ATTN     0x25
-#define SONY_FOCUS_SERVO_ERR_ATTN       0x26
-#define SONY_TOC_READ_DONE_ATTN         0x62
-#define SONY_FOCUS_ON_TOC_READ_ERR_ATTN 0x63
-#define SONY_SYNC_ON_TOC_READ_ERR_ATTN  0x65
-
-/* Auto eject group */
-#define SONY_SPIN_DOWN_COMPLETE_ATTN    0x27
-#define SONY_EJECT_COMPLETE_ATTN        0x28
-#define SONY_EJECT_MECH_ERR_ATTN        0x29
diff --git a/drivers/cdrom/cm206.c b/drivers/cdrom/cm206.c
deleted file mode 100644
index 230131163240..000000000000
--- a/drivers/cdrom/cm206.c
+++ /dev/null
@@ -1,1594 +0,0 @@
-/* cm206.c. A linux-driver for the cm206 cdrom player with cm260 adapter card.
-   Copyright (c) 1995--1997 David A. van Leeuwen.
-   $Id: cm206.c,v 1.5 1997/12/26 11:02:51 david Exp $
-   
-     This program is free software; you can redistribute it and/or modify
-     it under the terms of the GNU General Public License as published by
-     the Free Software Foundation; either version 2 of the License, or
-     (at your option) any later version.
-     
-     This program is distributed in the hope that it will be useful,
-     but WITHOUT ANY WARRANTY; without even the implied warranty of
-     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-     GNU General Public License for more details.
-     
-     You should have received a copy of the GNU General Public License
-     along with this program; if not, write to the Free Software
-     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-History:
- Started 25 jan 1994. Waiting for documentation...
- 22 feb 1995: 0.1a first reasonably safe polling driver.
-	      Two major bugs, one in read_sector and one in 
-	      do_cm206_request, happened to cancel!
- 25 feb 1995: 0.2a first reasonable interrupt driven version of above.
-              uart writes are still done in polling mode. 
- 25 feb 1995: 0.21a writes also in interrupt mode, still some
-	      small bugs to be found... Larger buffer. 
-  2 mrt 1995: 0.22 Bug found (cd-> nowhere, interrupt was called in
-              initialization), read_ahead of 16. Timeouts implemented.
-	      unclear if they do something...
-  7 mrt 1995: 0.23 Start of background read-ahead.
- 18 mrt 1995: 0.24 Working background read-ahead. (still problems)
- 26 mrt 1995: 0.25 Multi-session ioctl added (kernel v1.2).
-              Statistics implemented, though separate stats206.h.
-	      Accessible through ioctl 0x1000 (just a number).
-	      Hard to choose between v1.2 development and 1.1.75.
-	      Bottom-half doesn't work with 1.2...
-	      0.25a: fixed... typo. Still problems...
-  1 apr 1995: 0.26 Module support added. Most bugs found. Use kernel 1.2.n.
-  5 apr 1995: 0.27 Auto-probe for the adapter card base address.
-              Auto-probe for the adaptor card irq line.
-  7 apr 1995: 0.28 Added lilo setup support for base address and irq.
-              Use major number 32 (not in this source), officially
-	      assigned to this driver.
-  9 apr 1995: 0.29 Added very limited audio support. Toc_header, stop, pause,
-              resume, eject. Play_track ignores track info, because we can't 
-	      read a table-of-contents entry. Toc_entry is implemented
-	      as a `placebo' function: always returns start of disc. 
-  3 may 1995: 0.30 Audio support completed. The get_toc_entry function
-              is implemented as a binary search. 
- 15 may 1995: 0.31 More work on audio stuff. Workman is not easy to 
-              satisfy; changed binary search into linear search.
-	      Auto-probe for base address somewhat relaxed.
-  1 jun 1995: 0.32 Removed probe_irq_on/off for module version.
- 10 jun 1995: 0.33 Workman still behaves funny, but you should be
-              able to eject and substitute another disc.
-
- An adaptation of 0.33 is included in linux-1.3.7 by Eberhard Moenkeberg
-
- 18 jul 1995: 0.34 Patch by Heiko Eissfeldt included, mainly considering 
-              verify_area's in the ioctls. Some bugs introduced by 
-	      EM considering the base port and irq fixed. 
-
- 18 dec 1995: 0.35 Add some code for error checking... no luck...
-
- We jump to reach our goal: version 1.0 in the next stable linux kernel.
-
- 19 mar 1996: 0.95 Different implementation of CDROM_GET_UPC, on
-	      request of Thomas Quinot. 
- 25 mar 1996: 0.96 Interpretation of opening with O_WRONLY or O_RDWR:
-	      open only for ioctl operation, e.g., for operation of
-	      tray etc.
- 4 apr 1996:  0.97 First implementation of layer between VFS and cdrom
-              driver, a generic interface. Much of the functionality
-	      of cm206_open() and cm206_ioctl() is transferred to a
-	      new file cdrom.c and its header ucdrom.h. 
-
-	      Upgrade to Linux kernel 1.3.78. 
-
- 11 apr 1996  0.98 Upgrade to Linux kernel 1.3.85
-              More code moved to cdrom.c
- 
- 	      0.99 Some more small changes to decrease number
- 	      of oopses at module load; 
- 
- 27 jul 1996  0.100 Many hours of debugging, kernel change from 1.2.13
-	      to 2.0.7 seems to have introduced some weird behavior
-	      in (interruptible_)sleep_on(&cd->data): the process
-	      seems to be woken without any explicit wake_up in my own
-	      code. Patch to try 100x in case such untriggered wake_up's 
-	      occur. 
-
- 28 jul 1996  0.101 Rewriting of the code that receives the command echo,
-	      using a fifo to store echoed bytes. 
-
- 	      Branch from 0.99:
- 
- 	      0.99.1.0 Update to kernel release 2.0.10 dev_t -> kdev_t
- 	      (emoenke) various typos found by others.  extra
- 	      module-load oops protection.
- 
- 	      0.99.1.1 Initialization constant cdrom_dops.speed
- 	      changed from float (2.0) to int (2); Cli()-sti() pair
- 	      around cm260_reset() in module initialization code.
- 
- 	      0.99.1.2 Changes literally as proposed by Scott Snyder
- 	      <snyder@d0sgif.fnal.gov> for the 2.1 kernel line, which
- 	      have to do mainly with the poor minor support i had. The
- 	      major new concept is to change a cdrom driver's
- 	      operations struct from the capabilities struct. This
- 	      reflects the fact that there is one major for a driver,
- 	      whilst there can be many minors whith completely
- 	      different capabilities.
-
-	      0.99.1.3 More changes for operations/info separation.
-
-	      0.99.1.4 Added speed selection (someone had to do this
-	      first).
-
-  23 jan 1997 0.99.1.5 MODULE_PARMS call added.
-
-  23 jan 1997 0.100.1.2--0.100.1.5 following similar lines as 
-  	      0.99.1.1--0.99.1.5. I get too many complaints about the
-	      drive making read errors. What't wrong with the 2.0+
-	      kernel line? Why get i (and othe cm206 owners) weird
-	      results? Why were things good in the good old 1.1--1.2 
-	      era? Why don't i throw away the drive?
-
- 2 feb 1997   0.102 Added `volatile' to values in cm206_struct. Seems to 
- 	      reduce many of the problems. Rewrote polling routines
-	      to use fixed delays between polls. 
-	      0.103 Changed printk behavior. 
-	      0.104 Added a 0.100 -> 0.100.1.1 change
-
-11 feb 1997   0.105 Allow auto_probe during module load, disable
-              with module option "auto_probe=0". Moved some debugging
-	      statements to lower priority. Implemented select_speed()
-	      function. 
-
-13 feb 1997   1.0 Final version for 2.0 kernel line. 
-
-	      All following changes will be for the 2.1 kernel line. 
-
-15 feb 1997   1.1 Keep up with kernel 2.1.26, merge in changes from 
-              cdrom.c 0.100.1.1--1.0. Add some more MODULE_PARMS. 
-
-14 sep 1997   1.2 Upgrade to Linux 2.1.55.  Added blksize_size[], patch
-              sent by James Bottomley <James.Bottomley@columbiasc.ncr.com>.
-
-21 dec 1997   1.4 Upgrade to Linux 2.1.72.  
-
-24 jan 1998   Removed the cm206_disc_status() function, as it was now dead
-              code.  The Uniform CDROM driver now provides this functionality.
-	      
-9 Nov. 1999   Make kernel-parameter implementation work with 2.3.x 
-	      Removed init_module & cleanup_module in favor of 
-	      module_init & module_exit.
-	      Torben Mathiasen <tmm@image.dk>
- * 
- * Parts of the code are based upon lmscd.c written by Kai Petzke,
- * sbpcd.c written by Eberhard Moenkeberg, and mcd.c by Martin
- * Harriss, but any off-the-shelf dynamic programming algorithm won't
- * be able to find them.
- *
- * The cm206 drive interface and the cm260 adapter card seem to be 
- * sufficiently different from their cm205/cm250 counterparts
- * in order to write a complete new driver.
- * 
- * I call all routines connected to the Linux kernel something
- * with `cm206' in it, as this stuff is too series-dependent. 
- * 
- * Currently, my limited knowledge is based on:
- * - The Linux Kernel Hacker's guide, v. 0.5, by Michael K. Johnson
- * - Linux Kernel Programmierung, by Michael Beck and others
- * - Philips/LMS cm206 and cm226 product specification
- * - Philips/LMS cm260 product specification
- *
- * David van Leeuwen, david@tm.tno.nl.  */
-#define REVISION "$Revision: 1.5 $"
-
-#include <linux/module.h>
-
-#include <linux/errno.h>	/* These include what we really need */
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-/* #include <linux/ucdrom.h> */
-
-#include <asm/io.h>
-
-#define MAJOR_NR CM206_CDROM_MAJOR
-
-#include <linux/blkdev.h>
-
-#undef DEBUG
-#define STATISTICS		/* record times and frequencies of events */
-#define AUTO_PROBE_MODULE
-#define USE_INSW
-
-#include "cm206.h"
-
-/* This variable defines whether or not to probe for adapter base port 
-   address and interrupt request. It can be overridden by the boot 
-   parameter `auto'.
-*/
-static int auto_probe = 1;	/* Yes, why not? */
-
-static int cm206_base = CM206_BASE;
-static int cm206_irq = CM206_IRQ;
-#ifdef MODULE
-static int cm206[2] = { 0, 0 };	/* for compatible `insmod' parameter passing */
-module_param_array(cm206, int, NULL, 0);	/* base,irq or irq,base */
-#endif
-
-module_param(cm206_base, int, 0);	/* base */
-module_param(cm206_irq, int, 0);	/* irq */
-module_param(auto_probe, bool, 0);	/* auto probe base and irq */
-MODULE_LICENSE("GPL");
-
-#define POLLOOP 100		/* milliseconds */
-#define READ_AHEAD 1		/* defines private buffer, waste! */
-#define BACK_AHEAD 1		/* defines adapter-read ahead */
-#define DATA_TIMEOUT (3*HZ)	/* measured in jiffies (10 ms) */
-#define UART_TIMEOUT (5*HZ/100)
-#define DSB_TIMEOUT (7*HZ)	/* time for the slowest command to finish */
-#define UR_SIZE 4		/* uart receive buffer fifo size */
-
-#define LINUX_BLOCK_SIZE 512	/* WHERE is this defined? */
-#define RAW_SECTOR_SIZE 2352	/* ok, is also defined in cdrom.h */
-#define ISO_SECTOR_SIZE 2048
-#define BLOCKS_ISO (ISO_SECTOR_SIZE/LINUX_BLOCK_SIZE)	/* 4 */
-#define CD_SYNC_HEAD 16		/* CD_SYNC + CD_HEAD */
-
-#ifdef STATISTICS		/* keep track of errors in counters */
-#define stats(i) { ++cd->stats[st_ ## i]; \
-		     cd->last_stat[st_ ## i] = cd->stat_counter++; \
-		 }
-#else
-#define stats(i) (void) 0;
-#endif
-
-#define Debug(a) {printk (KERN_DEBUG); printk a;}
-#ifdef DEBUG
-#define debug(a) Debug(a)
-#else
-#define debug(a) (void) 0;
-#endif
-
-typedef unsigned char uch;	/* 8-bits */
-typedef unsigned short ush;	/* 16-bits */
-
-struct toc_struct {		/* private copy of Table of Contents */
-	uch track, fsm[3], q0;
-};
-
-struct cm206_struct {
-	volatile ush intr_ds;	/* data status read on last interrupt */
-	volatile ush intr_ls;	/* uart line status read on last interrupt */
-	volatile uch ur[UR_SIZE];	/* uart receive buffer fifo */
-	volatile uch ur_w, ur_r;	/* write/read buffer index */
-	volatile uch dsb, cc;	/* drive status byte and condition (error) code */
-	int command;		/* command to be written to the uart */
-	int openfiles;
-	ush sector[READ_AHEAD * RAW_SECTOR_SIZE / 2];	/* buffered cd-sector */
-	int sector_first, sector_last;	/* range of these sectors */
-	wait_queue_head_t uart;	/* wait queues for interrupt */
-	wait_queue_head_t data;
-	struct timer_list timer;	/* time-out */
-	char timed_out;
-	signed char max_sectors;	/* number of sectors that fit in adapter mem */
-	char wait_back;		/* we're waiting for a background-read */
-	char background;	/* is a read going on in the background? */
-	int adapter_first;	/* if so, that's the starting sector */
-	int adapter_last;
-	char fifo_overflowed;
-	uch disc_status[7];	/* result of get_disc_status command */
-#ifdef STATISTICS
-	int stats[NR_STATS];
-	int last_stat[NR_STATS];	/* `time' at which stat was stat */
-	int stat_counter;
-#endif
-	struct toc_struct toc[101];	/* The whole table of contents + lead-out */
-	uch q[10];		/* Last read q-channel info */
-	uch audio_status[5];	/* last read position on pause */
-	uch media_changed;	/* record if media changed */
-};
-
-#define DISC_STATUS cd->disc_status[0]
-#define FIRST_TRACK cd->disc_status[1]
-#define LAST_TRACK cd->disc_status[2]
-#define PAUSED cd->audio_status[0]	/* misuse this memory byte! */
-#define PLAY_TO cd->toc[0]	/* toc[0] records end-time in play */
-
-static struct cm206_struct *cd;	/* the main memory structure */
-static struct request_queue *cm206_queue;
-static DEFINE_SPINLOCK(cm206_lock);
-
-/* First, we define some polling functions. These are actually
-   only being used in the initialization. */
-
-static void send_command_polled(int command)
-{
-	int loop = POLLOOP;
-	while (!(inw(r_line_status) & ls_transmitter_buffer_empty)
-	       && loop > 0) {
-		mdelay(1);	/* one millisec delay */
-		--loop;
-	}
-	outw(command, r_uart_transmit);
-}
-
-static uch receive_echo_polled(void)
-{
-	int loop = POLLOOP;
-	while (!(inw(r_line_status) & ls_receive_buffer_full) && loop > 0) {
-		mdelay(1);
-		--loop;
-	}
-	return ((uch) inw(r_uart_receive));
-}
-
-static uch send_receive_polled(int command)
-{
-	send_command_polled(command);
-	return receive_echo_polled();
-}
-
-static inline void clear_ur(void)
-{
-	if (cd->ur_r != cd->ur_w) {
-		debug(("Deleting bytes from fifo:"));
-		for (; cd->ur_r != cd->ur_w;
-		     cd->ur_r++, cd->ur_r %= UR_SIZE)
-			debug((" 0x%x", cd->ur[cd->ur_r]));
-		debug(("\n"));
-	}
-}
-
-static struct tasklet_struct cm206_tasklet;
-
-/* The interrupt handler. When the cm260 generates an interrupt, very
-   much care has to be taken in reading out the registers in the right
-   order; in case of a receive_buffer_full interrupt, first the
-   uart_receive must be read, and then the line status again to
-   de-assert the interrupt line. It took me a couple of hours to find
-   this out:-( 
-
-   The function reset_cm206 appears to cause an interrupt, because
-   pulling up the INIT line clears both the uart-write-buffer /and/
-   the uart-write-buffer-empty mask. We call this a `lost interrupt,'
-   as there seems so reason for this to happen.
-*/
-
-static irqreturn_t cm206_interrupt(int sig, void *dev_id)
-{
-	volatile ush fool;
-	cd->intr_ds = inw(r_data_status);	/* resets data_ready, data_error,
-						   crc_error, sync_error, toc_ready 
-						   interrupts */
-	cd->intr_ls = inw(r_line_status);	/* resets overrun bit */
-	debug(("Intr, 0x%x 0x%x, %d\n", cd->intr_ds, cd->intr_ls,
-	       cd->background));
-	if (cd->intr_ls & ls_attention)
-		stats(attention);
-	/* receive buffer full? */
-	if (cd->intr_ls & ls_receive_buffer_full) {
-		cd->ur[cd->ur_w] = inb(r_uart_receive);	/* get order right! */
-		cd->intr_ls = inw(r_line_status);	/* resets rbf interrupt */
-		debug(("receiving #%d: 0x%x\n", cd->ur_w,
-		       cd->ur[cd->ur_w]));
-		cd->ur_w++;
-		cd->ur_w %= UR_SIZE;
-		if (cd->ur_w == cd->ur_r)
-			debug(("cd->ur overflow!\n"));
-		if (waitqueue_active(&cd->uart) && cd->background < 2) {
-			del_timer(&cd->timer);
-			wake_up_interruptible(&cd->uart);
-		}
-	}
-	/* data ready in fifo? */
-	else if (cd->intr_ds & ds_data_ready) {
-		if (cd->background)
-			++cd->adapter_last;
-		if (waitqueue_active(&cd->data)
-		    && (cd->wait_back || !cd->background)) {
-			del_timer(&cd->timer);
-			wake_up_interruptible(&cd->data);
-		}
-		stats(data_ready);
-	}
-	/* ready to issue a write command? */
-	else if (cd->command && cd->intr_ls & ls_transmitter_buffer_empty) {
-		outw(dc_normal | (inw(r_data_status) & 0x7f),
-		     r_data_control);
-		outw(cd->command, r_uart_transmit);
-		cd->command = 0;
-		if (!cd->background)
-			wake_up_interruptible(&cd->uart);
-	}
-	/* now treat errors (at least, identify them for debugging) */
-	else if (cd->intr_ds & ds_fifo_overflow) {
-		debug(("Fifo overflow at sectors 0x%x\n",
-		       cd->sector_first));
-		fool = inw(r_fifo_output_buffer);	/* de-assert the interrupt */
-		cd->fifo_overflowed = 1;	/* signal one word less should be read */
-		stats(fifo_overflow);
-	} else if (cd->intr_ds & ds_data_error) {
-		debug(("Data error at sector 0x%x\n", cd->sector_first));
-		stats(data_error);
-	} else if (cd->intr_ds & ds_crc_error) {
-		debug(("CRC error at sector 0x%x\n", cd->sector_first));
-		stats(crc_error);
-	} else if (cd->intr_ds & ds_sync_error) {
-		debug(("Sync at sector 0x%x\n", cd->sector_first));
-		stats(sync_error);
-	} else if (cd->intr_ds & ds_toc_ready) {
-		/* do something appropriate */
-	}
-	/* couldn't see why this interrupt, maybe due to init */
-	else {
-		outw(dc_normal | READ_AHEAD, r_data_control);
-		stats(lost_intr);
-	}
-	if (cd->background
-	    && (cd->adapter_last - cd->adapter_first == cd->max_sectors
-		|| cd->fifo_overflowed))
-		tasklet_schedule(&cm206_tasklet);	/* issue a stop read command */
-	stats(interrupt);
-	return IRQ_HANDLED;
-}
-
-/* we have put the address of the wait queue in who */
-static void cm206_timeout(unsigned long who)
-{
-	cd->timed_out = 1;
-	debug(("Timing out\n"));
-	wake_up_interruptible((wait_queue_head_t *) who);
-}
-
-/* This function returns 1 if a timeout occurred, 0 if an interrupt
-   happened */
-static int sleep_or_timeout(wait_queue_head_t * wait, int timeout)
-{
-	cd->timed_out = 0;
-	init_timer(&cd->timer);
-	cd->timer.data = (unsigned long) wait;
-	cd->timer.expires = jiffies + timeout;
-	add_timer(&cd->timer);
-	debug(("going to sleep\n"));
-	interruptible_sleep_on(wait);
-	del_timer(&cd->timer);
-	if (cd->timed_out) {
-		cd->timed_out = 0;
-		return 1;
-	} else
-		return 0;
-}
-
-static void send_command(int command)
-{
-	debug(("Sending 0x%x\n", command));
-	if (!(inw(r_line_status) & ls_transmitter_buffer_empty)) {
-		cd->command = command;
-		cli();		/* don't interrupt before sleep */
-		outw(dc_mask_sync_error | dc_no_stop_on_error |
-		     (inw(r_data_status) & 0x7f), r_data_control);
-		/* interrupt routine sends command */
-		if (sleep_or_timeout(&cd->uart, UART_TIMEOUT)) {
-			debug(("Time out on write-buffer\n"));
-			stats(write_timeout);
-			outw(command, r_uart_transmit);
-		}
-		debug(("Write commmand delayed\n"));
-	} else
-		outw(command, r_uart_transmit);
-}
-
-static uch receive_byte(int timeout)
-{
-	uch ret;
-	cli();
-	debug(("cli\n"));
-	ret = cd->ur[cd->ur_r];
-	if (cd->ur_r != cd->ur_w) {
-		sti();
-		debug(("returning #%d: 0x%x\n", cd->ur_r,
-		       cd->ur[cd->ur_r]));
-		cd->ur_r++;
-		cd->ur_r %= UR_SIZE;
-		return ret;
-	} else if (sleep_or_timeout(&cd->uart, timeout)) {	/* does sti() */
-		debug(("Time out on receive-buffer\n"));
-#ifdef STATISTICS
-		if (timeout == UART_TIMEOUT)
-			stats(receive_timeout)	/* no `;'! */
-			    else
-			stats(dsb_timeout);
-#endif
-		return 0xda;
-	}
-	ret = cd->ur[cd->ur_r];
-	debug(("slept; returning #%d: 0x%x\n", cd->ur_r,
-	       cd->ur[cd->ur_r]));
-	cd->ur_r++;
-	cd->ur_r %= UR_SIZE;
-	return ret;
-}
-
-static inline uch receive_echo(void)
-{
-	return receive_byte(UART_TIMEOUT);
-}
-
-static inline uch send_receive(int command)
-{
-	send_command(command);
-	return receive_echo();
-}
-
-static inline uch wait_dsb(void)
-{
-	return receive_byte(DSB_TIMEOUT);
-}
-
-static int type_0_command(int command, int expect_dsb)
-{
-	int e;
-	clear_ur();
-	if (command != (e = send_receive(command))) {
-		debug(("command 0x%x echoed as 0x%x\n", command, e));
-		stats(echo);
-		return -1;
-	}
-	if (expect_dsb) {
-		cd->dsb = wait_dsb();	/* wait for command to finish */
-	}
-	return 0;
-}
-
-static int type_1_command(int command, int bytes, uch * status)
-{				/* returns info */
-	int i;
-	if (type_0_command(command, 0))
-		return -1;
-	for (i = 0; i < bytes; i++)
-		status[i] = send_receive(c_gimme);
-	return 0;
-}
-
-/* This function resets the adapter card. We'd better not do this too
- * often, because it tends to generate `lost interrupts.' */
-static void reset_cm260(void)
-{
-	outw(dc_normal | dc_initialize | READ_AHEAD, r_data_control);
-	udelay(10);		/* 3.3 mu sec minimum */
-	outw(dc_normal | READ_AHEAD, r_data_control);
-}
-
-/* fsm: frame-sec-min from linear address; one of many */
-static void fsm(int lba, uch * fsm)
-{
-	fsm[0] = lba % 75;
-	lba /= 75;
-	lba += 2;
-	fsm[1] = lba % 60;
-	fsm[2] = lba / 60;
-}
-
-static inline int fsm2lba(uch * fsm)
-{
-	return fsm[0] + 75 * (fsm[1] - 2 + 60 * fsm[2]);
-}
-
-static inline int f_s_m2lba(uch f, uch s, uch m)
-{
-	return f + 75 * (s - 2 + 60 * m);
-}
-
-static int start_read(int start)
-{
-	uch read_sector[4] = { c_read_data, };
-	int i, e;
-
-	fsm(start, &read_sector[1]);
-	clear_ur();
-	for (i = 0; i < 4; i++)
-		if (read_sector[i] != (e = send_receive(read_sector[i]))) {
-			debug(("read_sector: %x echoes %x\n",
-			       read_sector[i], e));
-			stats(echo);
-			if (e == 0xff) {	/* this seems to happen often */
-				e = receive_echo();
-				debug(("Second try %x\n", e));
-				if (e != read_sector[i])
-					return -1;
-			}
-		}
-	return 0;
-}
-
-static int stop_read(void)
-{
-	int e;
-	type_0_command(c_stop, 0);
-	if ((e = receive_echo()) != 0xff) {
-		debug(("c_stop didn't send 0xff, but 0x%x\n", e));
-		stats(stop_0xff);
-		return -1;
-	}
-	return 0;
-}
-
-/* This function starts to read sectors in adapter memory, the
-   interrupt routine should stop the read. In fact, the bottom_half
-   routine takes care of this. Set a flag `background' in the cd
-   struct to indicate the process. */
-
-static int read_background(int start, int reading)
-{
-	if (cd->background)
-		return -1;	/* can't do twice */
-	outw(dc_normal | BACK_AHEAD, r_data_control);
-	if (!reading && start_read(start))
-		return -2;
-	cd->adapter_first = cd->adapter_last = start;
-	cd->background = 1;	/* flag a read is going on */
-	return 0;
-}
-
-#ifdef USE_INSW
-#define transport_data insw
-#else
-/* this routine implements insw(,,). There was a time i had the
-   impression that there would be any difference in error-behaviour. */
-void transport_data(int port, ush * dest, int count)
-{
-	int i;
-	ush *d;
-	for (i = 0, d = dest; i < count; i++, d++)
-		*d = inw(port);
-}
-#endif
-
-
-#define MAX_TRIES 100
-static int read_sector(int start)
-{
-	int tries = 0;
-	if (cd->background) {
-		cd->background = 0;
-		cd->adapter_last = -1;	/* invalidate adapter memory */
-		stop_read();
-	}
-	cd->fifo_overflowed = 0;
-	reset_cm260();		/* empty fifo etc. */
-	if (start_read(start))
-		return -1;
-	do {
-		if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) {
-			debug(("Read timed out sector 0x%x\n", start));
-			stats(read_timeout);
-			stop_read();
-			return -3;
-		}
-		tries++;
-	} while (cd->intr_ds & ds_fifo_empty && tries < MAX_TRIES);
-	if (tries > 1)
-		debug(("Took me some tries\n"))
-		    else
-	if (tries == MAX_TRIES)
-		debug(("MAX_TRIES tries for read sector\n"));
-	transport_data(r_fifo_output_buffer, cd->sector,
-		       READ_AHEAD * RAW_SECTOR_SIZE / 2);
-	if (read_background(start + READ_AHEAD, 1))
-		stats(read_background);
-	cd->sector_first = start;
-	cd->sector_last = start + READ_AHEAD;
-	stats(read_restarted);
-	return 0;
-}
-
-/* The function of bottom-half is to send a stop command to the drive
-   This isn't easy because the routine is not `owned' by any process;
-   we can't go to sleep! The variable cd->background gives the status:
-   0 no read pending
-   1 a read is pending
-   2 c_stop waits for write_buffer_empty
-   3 c_stop waits for receive_buffer_full: echo
-   4 c_stop waits for receive_buffer_full: 0xff
-*/
-
-static void cm206_tasklet_func(unsigned long ignore)
-{
-	debug(("bh: %d\n", cd->background));
-	switch (cd->background) {
-	case 1:
-		stats(bh);
-		if (!(cd->intr_ls & ls_transmitter_buffer_empty)) {
-			cd->command = c_stop;
-			outw(dc_mask_sync_error | dc_no_stop_on_error |
-			     (inw(r_data_status) & 0x7f), r_data_control);
-			cd->background = 2;
-			break;	/* we'd better not time-out here! */
-		} else
-			outw(c_stop, r_uart_transmit);
-		/* fall into case 2: */
-	case 2:
-		/* the write has been satisfied by interrupt routine */
-		cd->background = 3;
-		break;
-	case 3:
-		if (cd->ur_r != cd->ur_w) {
-			if (cd->ur[cd->ur_r] != c_stop) {
-				debug(("cm206_bh: c_stop echoed 0x%x\n",
-				       cd->ur[cd->ur_r]));
-				stats(echo);
-			}
-			cd->ur_r++;
-			cd->ur_r %= UR_SIZE;
-		}
-		cd->background++;
-		break;
-	case 4:
-		if (cd->ur_r != cd->ur_w) {
-			if (cd->ur[cd->ur_r] != 0xff) {
-				debug(("cm206_bh: c_stop reacted with 0x%x\n", cd->ur[cd->ur_r]));
-				stats(stop_0xff);
-			}
-			cd->ur_r++;
-			cd->ur_r %= UR_SIZE;
-		}
-		cd->background = 0;
-	}
-}
-
-static DECLARE_TASKLET(cm206_tasklet, cm206_tasklet_func, 0);
-
-/* This command clears the dsb_possible_media_change flag, so we must 
- * retain it.
- */
-static void get_drive_status(void)
-{
-	uch status[2];
-	type_1_command(c_drive_status, 2, status);	/* this might be done faster */
-	cd->dsb = status[0];
-	cd->cc = status[1];
-	cd->media_changed |=
-	    !!(cd->dsb & (dsb_possible_media_change |
-			  dsb_drive_not_ready | dsb_tray_not_closed));
-}
-
-static void get_disc_status(void)
-{
-	if (type_1_command(c_disc_status, 7, cd->disc_status)) {
-		debug(("get_disc_status: error\n"));
-	}
-}
-
-/* The new open. The real opening strategy is defined in cdrom.c. */
-
-static int cm206_open(struct cdrom_device_info *cdi, int purpose)
-{
-	if (!cd->openfiles) {	/* reset only first time */
-		cd->background = 0;
-		reset_cm260();
-		cd->adapter_last = -1;	/* invalidate adapter memory */
-		cd->sector_last = -1;
-	}
-	++cd->openfiles;
-	stats(open);
-	return 0;
-}
-
-static void cm206_release(struct cdrom_device_info *cdi)
-{
-	if (cd->openfiles == 1) {
-		if (cd->background) {
-			cd->background = 0;
-			stop_read();
-		}
-		cd->sector_last = -1;	/* Make our internal buffer invalid */
-		FIRST_TRACK = 0;	/* No valid disc status */
-	}
-	--cd->openfiles;
-}
-
-/* Empty buffer empties $sectors$ sectors of the adapter card buffer,
- * and then reads a sector in kernel memory.  */
-static void empty_buffer(int sectors)
-{
-	while (sectors >= 0) {
-		transport_data(r_fifo_output_buffer,
-			       cd->sector + cd->fifo_overflowed,
-			       RAW_SECTOR_SIZE / 2 - cd->fifo_overflowed);
-		--sectors;
-		++cd->adapter_first;	/* update the current adapter sector */
-		cd->fifo_overflowed = 0;	/* reset overflow bit */
-		stats(sector_transferred);
-	}
-	cd->sector_first = cd->adapter_first - 1;
-	cd->sector_last = cd->adapter_first;	/* update the buffer sector */
-}
-
-/* try_adapter. This function determines if the requested sector is
-   in adapter memory, or will appear there soon. Returns 0 upon
-   success */
-static int try_adapter(int sector)
-{
-	if (cd->adapter_first <= sector && sector < cd->adapter_last) {
-		/* sector is in adapter memory */
-		empty_buffer(sector - cd->adapter_first);
-		return 0;
-	} else if (cd->background == 1 && cd->adapter_first <= sector
-		   && sector < cd->adapter_first + cd->max_sectors) {
-		/* a read is going on, we can wait for it */
-		cd->wait_back = 1;
-		while (sector >= cd->adapter_last) {
-			if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) {
-				debug(("Timed out during background wait: %d %d %d %d\n", sector, cd->adapter_last, cd->adapter_first, cd->background));
-				stats(back_read_timeout);
-				cd->wait_back = 0;
-				return -1;
-			}
-		}
-		cd->wait_back = 0;
-		empty_buffer(sector - cd->adapter_first);
-		return 0;
-	} else
-		return -2;
-}
-
-/* This is not a very smart implementation. We could optimize for 
-   consecutive block numbers. I'm not convinced this would really
-   bring down the processor load. */
-static void do_cm206_request(request_queue_t * q)
-{
-	long int i, cd_sec_no;
-	int quarter, error;
-	uch *source, *dest;
-	struct request *req;
-
-	while (1) {	/* repeat until all requests have been satisfied */
-		req = elv_next_request(q);
-		if (!req)
-			return;
-
-		if (req->cmd != READ) {
-			debug(("Non-read command %d on cdrom\n", req->cmd));
-			end_request(req, 0);
-			continue;
-		}
-		spin_unlock_irq(q->queue_lock);
-		error = 0;
-		for (i = 0; i < req->nr_sectors; i++) {
-			int e1, e2;
-			cd_sec_no = (req->sector + i) / BLOCKS_ISO;	/* 4 times 512 bytes */
-			quarter = (req->sector + i) % BLOCKS_ISO;
-			dest = req->buffer + i * LINUX_BLOCK_SIZE;
-			/* is already in buffer memory? */
-			if (cd->sector_first <= cd_sec_no
-			    && cd_sec_no < cd->sector_last) {
-				source =
-				    ((uch *) cd->sector) + 16 +
-				    quarter * LINUX_BLOCK_SIZE +
-				    (cd_sec_no -
-				     cd->sector_first) * RAW_SECTOR_SIZE;
-				memcpy(dest, source, LINUX_BLOCK_SIZE);
-			} else if (!(e1 = try_adapter(cd_sec_no)) ||
-				   !(e2 = read_sector(cd_sec_no))) {
-				source =
-				    ((uch *) cd->sector) + 16 +
-				    quarter * LINUX_BLOCK_SIZE;
-				memcpy(dest, source, LINUX_BLOCK_SIZE);
-			} else {
-				error = 1;
-				debug(("cm206_request: %d %d\n", e1, e2));
-			}
-		}
-		spin_lock_irq(q->queue_lock);
-		end_request(req, !error);
-	}
-}
-
-/* Audio support. I've tried very hard, but the cm206 drive doesn't 
-   seem to have a get_toc (table-of-contents) function, while i'm
-   pretty sure it must read the toc upon disc insertion. Therefore
-   this function has been implemented through a binary search 
-   strategy. All track starts that happen to be found are stored in
-   cd->toc[], for future use. 
-
-   I've spent a whole day on a bug that only shows under Workman---
-   I don't get it. Tried everything, nothing works. If workman asks
-   for track# 0xaa, it'll get the wrong time back. Any other program
-   receives the correct value. I'm stymied.
-*/
-
-/* seek seeks to address lba. It does wait to arrive there. */
-static void seek(int lba)
-{
-	int i;
-	uch seek_command[4] = { c_seek, };
-
-	fsm(lba, &seek_command[1]);
-	for (i = 0; i < 4; i++)
-		type_0_command(seek_command[i], 0);
-	cd->dsb = wait_dsb();
-}
-
-static uch bcdbin(unsigned char bcd)
-{				/* stolen from mcd.c! */
-	return (bcd >> 4) * 10 + (bcd & 0xf);
-}
-
-static inline uch normalize_track(uch track)
-{
-	if (track < 1)
-		return 1;
-	if (track > LAST_TRACK)
-		return LAST_TRACK + 1;
-	return track;
-}
-
-/* This function does a binary search for track start. It records all
- * tracks seen in the process. Input $track$ must be between 1 and
- * #-of-tracks+1.  Note that the start of the disc must be in toc[1].fsm. 
- */
-static int get_toc_lba(uch track)
-{
-	int max = 74 * 60 * 75 - 150, min = fsm2lba(cd->toc[1].fsm);
-	int i, lba, l, old_lba = 0;
-	uch *q = cd->q;
-	uch ct;			/* current track */
-	int binary = 0;
-	const int skip = 3 * 60 * 75;	/* 3 minutes */
-
-	for (i = track; i > 0; i--)
-		if (cd->toc[i].track) {
-			min = fsm2lba(cd->toc[i].fsm);
-			break;
-		}
-	lba = min + skip;
-	do {
-		seek(lba);
-		type_1_command(c_read_current_q, 10, q);
-		ct = normalize_track(q[1]);
-		if (!cd->toc[ct].track) {
-			l = q[9] - bcdbin(q[5]) + 75 * (q[8] -
-							bcdbin(q[4]) - 2 +
-							60 * (q[7] -
-							      bcdbin(q
-								     [3])));
-			cd->toc[ct].track = q[1];	/* lead out still 0xaa */
-			fsm(l, cd->toc[ct].fsm);
-			cd->toc[ct].q0 = q[0];	/* contains adr and ctrl info */
-			if (ct == track)
-				return l;
-		}
-		old_lba = lba;
-		if (binary) {
-			if (ct < track)
-				min = lba;
-			else
-				max = lba;
-			lba = (min + max) / 2;
-		} else {
-			if (ct < track)
-				lba += skip;
-			else {
-				binary = 1;
-				max = lba;
-				min = lba - skip;
-				lba = (min + max) / 2;
-			}
-		}
-	} while (lba != old_lba);
-	return lba;
-}
-
-static void update_toc_entry(uch track)
-{
-	track = normalize_track(track);
-	if (!cd->toc[track].track)
-		get_toc_lba(track);
-}
-
-/* return 0 upon success */
-static int read_toc_header(struct cdrom_tochdr *hp)
-{
-	if (!FIRST_TRACK)
-		get_disc_status();
-	if (hp) {
-		int i;
-		hp->cdth_trk0 = FIRST_TRACK;
-		hp->cdth_trk1 = LAST_TRACK;
-		/* fill in first track position */
-		for (i = 0; i < 3; i++)
-			cd->toc[1].fsm[i] = cd->disc_status[3 + i];
-		update_toc_entry(LAST_TRACK + 1);	/* find most entries */
-		return 0;
-	}
-	return -1;
-}
-
-static void play_from_to_msf(struct cdrom_msf *msfp)
-{
-	uch play_command[] = { c_play,
-		msfp->cdmsf_frame0, msfp->cdmsf_sec0, msfp->cdmsf_min0,
-		msfp->cdmsf_frame1, msfp->cdmsf_sec1, msfp->cdmsf_min1, 2,
-		    2
-	};
-	int i;
-	for (i = 0; i < 9; i++)
-		type_0_command(play_command[i], 0);
-	for (i = 0; i < 3; i++)
-		PLAY_TO.fsm[i] = play_command[i + 4];
-	PLAY_TO.track = 0;	/* say no track end */
-	cd->dsb = wait_dsb();
-}
-
-static void play_from_to_track(int from, int to)
-{
-	uch play_command[8] = { c_play, };
-	int i;
-
-	if (from == 0) {	/* continue paused play */
-		for (i = 0; i < 3; i++) {
-			play_command[i + 1] = cd->audio_status[i + 2];
-			play_command[i + 4] = PLAY_TO.fsm[i];
-		}
-	} else {
-		update_toc_entry(from);
-		update_toc_entry(to + 1);
-		for (i = 0; i < 3; i++) {
-			play_command[i + 1] = cd->toc[from].fsm[i];
-			PLAY_TO.fsm[i] = play_command[i + 4] =
-			    cd->toc[to + 1].fsm[i];
-		}
-		PLAY_TO.track = to;
-	}
-	for (i = 0; i < 7; i++)
-		type_0_command(play_command[i], 0);
-	for (i = 0; i < 2; i++)
-		type_0_command(0x2, 0);	/* volume */
-	cd->dsb = wait_dsb();
-}
-
-static int get_current_q(struct cdrom_subchnl *qp)
-{
-	int i;
-	uch *q = cd->q;
-	if (type_1_command(c_read_current_q, 10, q))
-		return 0;
-/*  q[0] = bcdbin(q[0]); Don't think so! */
-	for (i = 2; i < 6; i++)
-		q[i] = bcdbin(q[i]);
-	qp->cdsc_adr = q[0] & 0xf;
-	qp->cdsc_ctrl = q[0] >> 4;	/* from mcd.c */
-	qp->cdsc_trk = q[1];
-	qp->cdsc_ind = q[2];
-	if (qp->cdsc_format == CDROM_MSF) {
-		qp->cdsc_reladdr.msf.minute = q[3];
-		qp->cdsc_reladdr.msf.second = q[4];
-		qp->cdsc_reladdr.msf.frame = q[5];
-		qp->cdsc_absaddr.msf.minute = q[7];
-		qp->cdsc_absaddr.msf.second = q[8];
-		qp->cdsc_absaddr.msf.frame = q[9];
-	} else {
-		qp->cdsc_reladdr.lba = f_s_m2lba(q[5], q[4], q[3]);
-		qp->cdsc_absaddr.lba = f_s_m2lba(q[9], q[8], q[7]);
-	}
-	get_drive_status();
-	if (cd->dsb & dsb_play_in_progress)
-		qp->cdsc_audiostatus = CDROM_AUDIO_PLAY;
-	else if (PAUSED)
-		qp->cdsc_audiostatus = CDROM_AUDIO_PAUSED;
-	else
-		qp->cdsc_audiostatus = CDROM_AUDIO_NO_STATUS;
-	return 0;
-}
-
-static void invalidate_toc(void)
-{
-	memset(cd->toc, 0, sizeof(cd->toc));
-	memset(cd->disc_status, 0, sizeof(cd->disc_status));
-}
-
-/* cdrom.c guarantees that cdte_format == CDROM_MSF */
-static void get_toc_entry(struct cdrom_tocentry *ep)
-{
-	uch track = normalize_track(ep->cdte_track);
-	update_toc_entry(track);
-	ep->cdte_addr.msf.frame = cd->toc[track].fsm[0];
-	ep->cdte_addr.msf.second = cd->toc[track].fsm[1];
-	ep->cdte_addr.msf.minute = cd->toc[track].fsm[2];
-	ep->cdte_adr = cd->toc[track].q0 & 0xf;
-	ep->cdte_ctrl = cd->toc[track].q0 >> 4;
-	ep->cdte_datamode = 0;
-}
-
-/* Audio ioctl.  Ioctl commands connected to audio are in such an
- * idiosyncratic i/o format, that we leave these untouched. Return 0
- * upon success. Memory checking has been done by cdrom_ioctl(), the
- * calling function, as well as LBA/MSF sanitization.
-*/
-static int cm206_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
-			     void *arg)
-{
-	switch (cmd) {
-	case CDROMREADTOCHDR:
-		return read_toc_header((struct cdrom_tochdr *) arg);
-	case CDROMREADTOCENTRY:
-		get_toc_entry((struct cdrom_tocentry *) arg);
-		return 0;
-	case CDROMPLAYMSF:
-		play_from_to_msf((struct cdrom_msf *) arg);
-		return 0;
-	case CDROMPLAYTRKIND:	/* admittedly, not particularly beautiful */
-		play_from_to_track(((struct cdrom_ti *) arg)->cdti_trk0,
-				   ((struct cdrom_ti *) arg)->cdti_trk1);
-		return 0;
-	case CDROMSTOP:
-		PAUSED = 0;
-		if (cd->dsb & dsb_play_in_progress)
-			return type_0_command(c_stop, 1);
-		else
-			return 0;
-	case CDROMPAUSE:
-		get_drive_status();
-		if (cd->dsb & dsb_play_in_progress) {
-			type_0_command(c_stop, 1);
-			type_1_command(c_audio_status, 5,
-				       cd->audio_status);
-			PAUSED = 1;	/* say we're paused */
-		}
-		return 0;
-	case CDROMRESUME:
-		if (PAUSED)
-			play_from_to_track(0, 0);
-		PAUSED = 0;
-		return 0;
-	case CDROMSTART:
-	case CDROMVOLCTRL:
-		return 0;
-	case CDROMSUBCHNL:
-		return get_current_q((struct cdrom_subchnl *) arg);
-	default:
-		return -EINVAL;
-	}
-}
-
-static int cm206_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
-	if (cd != NULL) {
-		int r;
-		get_drive_status();	/* ensure cd->media_changed OK */
-		r = cd->media_changed;
-		cd->media_changed = 0;	/* clear bit */
-		return r;
-	} else
-		return -EIO;
-}
-
-/* The new generic cdrom support. Routines should be concise, most of
-   the logic should be in cdrom.c */
-
-
-/* controls tray movement */
-static int cm206_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	if (position) {		/* 1: eject */
-		type_0_command(c_open_tray, 1);
-		invalidate_toc();
-	} else
-		type_0_command(c_close_tray, 1);	/* 0: close */
-	return 0;
-}
-
-/* gives current state of the drive */
-static int cm206_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
-	get_drive_status();
-	if (cd->dsb & dsb_tray_not_closed)
-		return CDS_TRAY_OPEN;
-	if (!(cd->dsb & dsb_disc_present))
-		return CDS_NO_DISC;
-	if (cd->dsb & dsb_drive_not_ready)
-		return CDS_DRIVE_NOT_READY;
-	return CDS_DISC_OK;
-}
-
-/* locks or unlocks door lock==1: lock; return 0 upon success */
-static int cm206_lock_door(struct cdrom_device_info *cdi, int lock)
-{
-	uch command = (lock) ? c_lock_tray : c_unlock_tray;
-	type_0_command(command, 1);	/* wait and get dsb */
-	/* the logic calculates the success, 0 means successful */
-	return lock ^ ((cd->dsb & dsb_tray_locked) != 0);
-}
-
-/* Although a session start should be in LBA format, we return it in 
-   MSF format because it is slightly easier, and the new generic ioctl
-   will take care of the necessary conversion. */
-static int cm206_get_last_session(struct cdrom_device_info *cdi,
-				  struct cdrom_multisession *mssp)
-{
-	if (!FIRST_TRACK)
-		get_disc_status();
-	if (mssp != NULL) {
-		if (DISC_STATUS & cds_multi_session) {	/* multi-session */
-			mssp->addr.msf.frame = cd->disc_status[3];
-			mssp->addr.msf.second = cd->disc_status[4];
-			mssp->addr.msf.minute = cd->disc_status[5];
-			mssp->addr_format = CDROM_MSF;
-			mssp->xa_flag = 1;
-		} else {
-			mssp->xa_flag = 0;
-		}
-		return 1;
-	}
-	return 0;
-}
-
-static int cm206_get_upc(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
-	uch upc[10];
-	char *ret = mcn->medium_catalog_number;
-	int i;
-
-	if (type_1_command(c_read_upc, 10, upc))
-		return -EIO;
-	for (i = 0; i < 13; i++) {
-		int w = i / 2 + 1, r = i % 2;
-		if (r)
-			ret[i] = 0x30 | (upc[w] & 0x0f);
-		else
-			ret[i] = 0x30 | ((upc[w] >> 4) & 0x0f);
-	}
-	ret[13] = '\0';
-	return 0;
-}
-
-static int cm206_reset(struct cdrom_device_info *cdi)
-{
-	stop_read();
-	reset_cm260();
-	outw(dc_normal | dc_break | READ_AHEAD, r_data_control);
-	mdelay(1);		/* 750 musec minimum */
-	outw(dc_normal | READ_AHEAD, r_data_control);
-	cd->sector_last = -1;	/* flag no data buffered */
-	cd->adapter_last = -1;
-	invalidate_toc();
-	return 0;
-}
-
-static int cm206_select_speed(struct cdrom_device_info *cdi, int speed)
-{
-	int r;
-	switch (speed) {
-	case 0:
-		r = type_0_command(c_auto_mode, 1);
-		break;
-	case 1:
-		r = type_0_command(c_force_1x, 1);
-		break;
-	case 2:
-		r = type_0_command(c_force_2x, 1);
-		break;
-	default:
-		return -1;
-	}
-	if (r < 0)
-		return r;
-	else
-		return 1;
-}
-
-static struct cdrom_device_ops cm206_dops = {
-	.open			= cm206_open,
-	.release		= cm206_release,
-	.drive_status		= cm206_drive_status,
-	.media_changed		= cm206_media_changed,
-	.tray_move		= cm206_tray_move,
-	.lock_door		= cm206_lock_door,
-	.select_speed		= cm206_select_speed,
-	.get_last_session	= cm206_get_last_session,
-	.get_mcn		= cm206_get_upc,
-	.reset			= cm206_reset,
-	.audio_ioctl		= cm206_audio_ioctl,
-	.capability		= CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
-				  CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
-				  CDC_MCN | CDC_PLAY_AUDIO | CDC_SELECT_SPEED |
-				  CDC_DRIVE_STATUS,
-	.n_minors		= 1,
-};
-
-
-static struct cdrom_device_info cm206_info = {
-	.ops		= &cm206_dops,
-	.speed		= 2,
-	.capacity	= 1,
-	.name		= "cm206",
-};
-
-static int cm206_block_open(struct inode *inode, struct file *file)
-{
-	return cdrom_open(&cm206_info, inode, file);
-}
-
-static int cm206_block_release(struct inode *inode, struct file *file)
-{
-	return cdrom_release(&cm206_info, file);
-}
-
-static int cm206_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	switch (cmd) {
-#ifdef STATISTICS
-	case CM206CTL_GET_STAT:
-		if (arg >= NR_STATS)
-			return -EINVAL;
-		return cd->stats[arg];
-	case CM206CTL_GET_LAST_STAT:
-		if (arg >= NR_STATS)
-			return -EINVAL;
-		return cd->last_stat[arg];
-#endif
-	default:
-		break;
-	}
-
-	return cdrom_ioctl(file, &cm206_info, inode, cmd, arg);
-}
-
-static int cm206_block_media_changed(struct gendisk *disk)
-{
-	return cdrom_media_changed(&cm206_info);
-}
-
-static struct block_device_operations cm206_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= cm206_block_open,
-	.release	= cm206_block_release,
-	.ioctl		= cm206_block_ioctl,
-	.media_changed	= cm206_block_media_changed,
-};
-
-static struct gendisk *cm206_gendisk;
-
-/* This function probes for the adapter card. It returns the base
-   address if it has found the adapter card. One can specify a base 
-   port to probe specifically, or 0 which means span all possible
-   bases. 
-
-   Linus says it is too dangerous to use writes for probing, so we
-   stick with pure reads for a while. Hope that 8 possible ranges,
-   request_region, 15 bits of one port and 6 of another make things
-   likely enough to accept the region on the first hit...
- */
-static int __init probe_base_port(int base)
-{
-	int b = 0x300, e = 0x370;	/* this is the range of start addresses */
-	volatile int fool, i;
-
-	if (base)
-		b = e = base;
-	for (base = b; base <= e; base += 0x10) {
-		if (!request_region(base, 0x10,"cm206"))
-			continue;
-		for (i = 0; i < 3; i++)
-			fool = inw(base + 2);	/* empty possibly uart_receive_buffer */
-		if ((inw(base + 6) & 0xffef) != 0x0001 ||	/* line_status */
-		    (inw(base) & 0xad00) != 0)	{ /* data status */
-		    	release_region(base,0x10);
-			continue;
-		}
-		return (base);
-	}
-	return 0;
-}
-
-#if !defined(MODULE) || defined(AUTO_PROBE_MODULE)
-/* Probe for irq# nr. If nr==0, probe for all possible irq's. */
-static int __init probe_irq(int nr)
-{
-	int irqs, irq;
-	outw(dc_normal | READ_AHEAD, r_data_control);	/* disable irq-generation */
-	sti();
-	irqs = probe_irq_on();
-	reset_cm260();		/* causes interrupt */
-	udelay(100);		/* wait for it */
-	irq = probe_irq_off(irqs);
-	outw(dc_normal | READ_AHEAD, r_data_control);	/* services interrupt */
-	if (nr && irq != nr && irq > 0)
-		return 0;	/* wrong interrupt happened */
-	else
-		return irq;
-}
-#endif
-
-int __init cm206_init(void)
-{
-	uch e = 0;
-	long int size = sizeof(struct cm206_struct);
-	struct gendisk *disk;
-
-	printk(KERN_INFO "cm206 cdrom driver " REVISION);
-	cm206_base = probe_base_port(auto_probe ? 0 : cm206_base);
-	if (!cm206_base) {
-		printk(" can't find adapter!\n");
-		return -EIO;
-	}
-	printk(" adapter at 0x%x", cm206_base);
-	cd = kmalloc(size, GFP_KERNEL);
-	if (!cd)
-               goto out_base;
-	/* Now we have found the adaptor card, try to reset it. As we have
-	 * found out earlier, this process generates an interrupt as well,
-	 * so we might just exploit that fact for irq probing! */
-#if !defined(MODULE) || defined(AUTO_PROBE_MODULE)
-	cm206_irq = probe_irq(auto_probe ? 0 : cm206_irq);
-	if (cm206_irq <= 0) {
-		printk("can't find IRQ!\n");
-		goto out_probe;
-	} else
-		printk(" IRQ %d found\n", cm206_irq);
-#else
-	cli();
-	reset_cm260();
-	/* Now, the problem here is that reset_cm260 can generate an
-	   interrupt. It seems that this can cause a kernel oops some time
-	   later. So we wait a while and `service' this interrupt. */
-	mdelay(1);
-	outw(dc_normal | READ_AHEAD, r_data_control);
-	sti();
-	printk(" using IRQ %d\n", cm206_irq);
-#endif
-	if (send_receive_polled(c_drive_configuration) !=
-	    c_drive_configuration) {
-		printk(KERN_INFO " drive not there\n");
-		goto out_probe;
-	}
-	e = send_receive_polled(c_gimme);
-	printk(KERN_INFO "Firmware revision %d", e & dcf_revision_code);
-	if (e & dcf_transfer_rate)
-		printk(" double");
-	else
-		printk(" single");
-	printk(" speed drive");
-	if (e & dcf_motorized_tray)
-		printk(", motorized tray");
-	if (request_irq(cm206_irq, cm206_interrupt, 0, "cm206", NULL)) {
-		printk("\nUnable to reserve IRQ---aborted\n");
-		goto out_probe;
-	}
-	printk(".\n");
-
-	if (register_blkdev(MAJOR_NR, "cm206"))
-		goto out_blkdev;
-
-	disk = alloc_disk(1);
-	if (!disk)
-		goto out_disk;
-	disk->major = MAJOR_NR;
-	disk->first_minor = 0;
-	sprintf(disk->disk_name, "cm206cd");
-	disk->fops = &cm206_bdops;
-	disk->flags = GENHD_FL_CD;
-	cm206_gendisk = disk;
-	if (register_cdrom(&cm206_info) != 0) {
-		printk(KERN_INFO "Cannot register for cdrom %d!\n", MAJOR_NR);
-		goto out_cdrom;
-	}
-	cm206_queue = blk_init_queue(do_cm206_request, &cm206_lock);
-	if (!cm206_queue)
-		goto out_queue;
-		
-	blk_queue_hardsect_size(cm206_queue, 2048);
-	disk->queue = cm206_queue;
-	add_disk(disk);
-
-	memset(cd, 0, sizeof(*cd));	/* give'm some reasonable value */
-	cd->sector_last = -1;	/* flag no data buffered */
-	cd->adapter_last = -1;
-	init_timer(&cd->timer);
-	cd->timer.function = cm206_timeout;
-	cd->max_sectors = (inw(r_data_status) & ds_ram_size) ? 24 : 97;
-	printk(KERN_INFO "%d kB adapter memory available, "
-	       " %ld bytes kernel memory used.\n", cd->max_sectors * 2,
-	       size);
-	return 0;
-
-out_queue:
-	unregister_cdrom(&cm206_info);
-out_cdrom:
-	put_disk(disk);
-out_disk:
-	unregister_blkdev(MAJOR_NR, "cm206");
-out_blkdev:
-	free_irq(cm206_irq, NULL);
-out_probe:
-	kfree(cd);
-out_base:
-	release_region(cm206_base, 16);
-	return -EIO;
-}
-
-#ifdef MODULE
-
-
-static void __init parse_options(void)
-{
-	int i;
-	for (i = 0; i < 2; i++) {
-		if (0x300 <= cm206[i] && i <= 0x370
-		    && cm206[i] % 0x10 == 0) {
-			cm206_base = cm206[i];
-			auto_probe = 0;
-		} else if (3 <= cm206[i] && cm206[i] <= 15) {
-			cm206_irq = cm206[i];
-			auto_probe = 0;
-		}
-	}
-}
-
-static int __init __cm206_init(void)
-{
-	parse_options();
-#if !defined(AUTO_PROBE_MODULE)
-	auto_probe = 0;
-#endif
-	return cm206_init();
-}
-
-static void __exit cm206_exit(void)
-{
-	del_gendisk(cm206_gendisk);
-	put_disk(cm206_gendisk);
-	if (unregister_cdrom(&cm206_info)) {
-		printk("Can't unregister cdrom cm206\n");
-		return;
-	}
-	if (unregister_blkdev(MAJOR_NR, "cm206")) {
-		printk("Can't unregister major cm206\n");
-		return;
-	}
-	blk_cleanup_queue(cm206_queue);
-	free_irq(cm206_irq, NULL);
-	kfree(cd);
-	release_region(cm206_base, 16);
-	printk(KERN_INFO "cm206 removed\n");
-}
-
-module_init(__cm206_init);
-module_exit(cm206_exit);
-
-#else				/* !MODULE */
-
-/* This setup function accepts either `auto' or numbers in the range
- * 3--11 (for irq) or 0x300--0x370 (for base port) or both. */
-
-static int __init cm206_setup(char *s)
-{
-	int i, p[4];
-
-	(void) get_options(s, ARRAY_SIZE(p), p);
-
-	if (!strcmp(s, "auto"))
-		auto_probe = 1;
-	for (i = 1; i <= p[0]; i++) {
-		if (0x300 <= p[i] && i <= 0x370 && p[i] % 0x10 == 0) {
-			cm206_base = p[i];
-			auto_probe = 0;
-		} else if (3 <= p[i] && p[i] <= 15) {
-			cm206_irq = p[i];
-			auto_probe = 0;
-		}
-	}
-	return 1;
-}
-
-__setup("cm206=", cm206_setup);
-
-#endif				/* !MODULE */
-MODULE_ALIAS_BLOCKDEV_MAJOR(CM206_CDROM_MAJOR);
-
diff --git a/drivers/cdrom/cm206.h b/drivers/cdrom/cm206.h
deleted file mode 100644
index 0ae51c1a0dac..000000000000
--- a/drivers/cdrom/cm206.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/* cm206.h Header file for cm206.c.
-   Copyright (c) 1995 David van Leeuwen 
-*/
-
-#ifndef LINUX_CM206_H
-#define LINUX_CM206_H
-
-#include <linux/ioctl.h>
-
-/* First, the cm260 stuff */
-/* The ports and irq used. Although CM206_BASE and CM206_IRQ are defined
-   below, the values are not used unless autoprobing is turned off and 
-   no LILO boot options or module command line options are given. Change
-   these values to your own as last resort if autoprobing and options
-   don't work. */
-
-#define CM206_BASE 0x340
-#define CM206_IRQ 11
-
-#define r_data_status (cm206_base)
-#define r_uart_receive (cm206_base+0x2)
-#define r_fifo_output_buffer (cm206_base+0x4)
-#define r_line_status (cm206_base+0x6)
-#define r_data_control (cm206_base+0x8)
-#define r_uart_transmit (cm206_base+0xa)
-#define r_test_clock (cm206_base+0xc)
-#define r_test_control (cm206_base+0xe)
-
-/* the data_status flags */
-#define ds_ram_size 0x4000
-#define ds_toc_ready 0x2000
-#define ds_fifo_empty 0x1000
-#define ds_sync_error 0x800
-#define ds_crc_error 0x400
-#define ds_data_error 0x200
-#define ds_fifo_overflow 0x100
-#define ds_data_ready 0x80
-
-/* the line_status flags */
-#define ls_attention 0x10
-#define ls_parity_error 0x8
-#define ls_overrun 0x4
-#define ls_receive_buffer_full 0x2
-#define ls_transmitter_buffer_empty 0x1
-
-/* the data control register flags */
-#define dc_read_q_channel 0x4000
-#define dc_mask_sync_error 0x2000
-#define dc_toc_enable 0x1000
-#define dc_no_stop_on_error 0x800
-#define dc_break 0x400
-#define dc_initialize 0x200
-#define dc_mask_transmit_ready 0x100
-#define dc_flag_enable 0x80
-
-/* Define the default data control register flags here */
-#define dc_normal (dc_mask_sync_error | dc_no_stop_on_error | \
-		   dc_mask_transmit_ready)
-
-/* now some constants related to the cm206 */
-/* another drive status byte, echoed by the cm206 on most commands */
-
-#define dsb_error_condition 0x1
-#define dsb_play_in_progress 0x4
-#define dsb_possible_media_change 0x8
-#define dsb_disc_present 0x10
-#define dsb_drive_not_ready 0x20
-#define dsb_tray_locked 0x40
-#define dsb_tray_not_closed 0x80
-
-#define dsb_not_useful (dsb_drive_not_ready | dsb_tray_not_closed)
-
-/* the cm206 command set */
-
-#define c_close_tray 0
-#define c_lock_tray 0x01
-#define c_unlock_tray 0x04
-#define c_open_tray 0x05
-#define c_seek 0x10
-#define c_read_data 0x20
-#define c_force_1x 0x21
-#define c_force_2x 0x22
-#define c_auto_mode 0x23
-#define c_play 0x30
-#define c_set_audio_mode 0x31
-#define c_read_current_q 0x41
-#define c_stream_q 0x42
-#define c_drive_status 0x50
-#define c_disc_status 0x51
-#define c_audio_status 0x52
-#define c_drive_configuration 0x53
-#define c_read_upc 0x60
-#define c_stop 0x70
-#define c_calc_checksum 0xe5
-
-#define c_gimme 0xf8
-
-/* finally, the (error) condition that the drive can be in      *
- * OK, this is not always an error, but let's prefix it with e_ */
-
-#define e_none 0
-#define e_illegal_command 0x01
-#define e_sync 0x02
-#define e_seek 0x03
-#define e_parity 0x04
-#define e_focus 0x05
-#define e_header_sync 0x06
-#define e_code_incompatibility 0x07
-#define e_reset_done 0x08
-#define e_bad_parameter 0x09
-#define e_radial 0x0a
-#define e_sub_code 0x0b
-#define e_no_data_track 0x0c
-#define e_scan 0x0d
-#define e_tray_open 0x0f
-#define e_no_disc 0x10
-#define e_tray stalled 0x11
-
-/* drive configuration masks */
-
-#define dcf_revision_code 0x7
-#define dcf_transfer_rate 0x60
-#define dcf_motorized_tray 0x80
-
-/* disc status byte */
-
-#define cds_multi_session 0x2
-#define cds_all_audio 0x8
-#define cds_xa_mode 0xf0
-
-/* finally some ioctls for the driver */
-
-#define CM206CTL_GET_STAT _IO( 0x20, 0 )
-#define CM206CTL_GET_LAST_STAT _IO( 0x20, 1 )
-
-#ifdef STATISTICS
-
-/* This is an ugly way to guarantee that the names of the statistics
- * are the same in the code and in the diagnostics program.  */
-
-#ifdef __KERNEL__
-#define x(a) st_ ## a
-#define y enum
-#else
-#define x(a) #a
-#define y char * stats_name[] = 
-#endif
-
-y {x(interrupt), x(data_ready), x(fifo_overflow), x(data_error),
-     x(crc_error), x(sync_error), x(lost_intr), x(echo),
-     x(write_timeout), x(receive_timeout), x(read_timeout),
-     x(dsb_timeout), x(stop_0xff), x(back_read_timeout),
-     x(sector_transferred), x(read_restarted), x(read_background),
-     x(bh), x(open), x(ioctl_multisession), x(attention)
-#ifdef __KERNEL__
-     , x(last_entry)
-#endif
- };
-
-#ifdef __KERNEL__
-#define NR_STATS st_last_entry
-#else
-#define NR_STATS (sizeof(stats_name)/sizeof(char*))
-#endif
-
-#undef y
-#undef x
-
-#endif /* STATISTICS */
-
-#endif /* LINUX_CM206_H */
diff --git a/drivers/cdrom/gscd.c b/drivers/cdrom/gscd.c
deleted file mode 100644
index b3ab6e9b8df1..000000000000
--- a/drivers/cdrom/gscd.c
+++ /dev/null
@@ -1,1029 +0,0 @@
-#define GSCD_VERSION "0.4a Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>"
-
-/*
-	linux/drivers/block/gscd.c - GoldStar R420 CDROM driver
-
-        Copyright (C) 1995  Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
-        based upon pre-works by   Eberhard Moenkeberg <emoenke@gwdg.de>
-        
-
-        For all kind of other information about the GoldStar CDROM
-        and this Linux device driver I installed a WWW-URL:
-        http://linux.rz.fh-hannover.de/~raupach        
-
-
-             If you are the editor of a Linux CD, you should
-             enable gscd.c within your boot floppy kernel and
-             send me one of your CDs for free.
-
-
-        --------------------------------------------------------------------
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2, or (at your option)
-	any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-	
-	--------------------------------------------------------------------
-	
-	9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
-	                   Removed init_module & cleanup_module in favor of 
-		   	   module_init & module_exit.
-			   Torben Mathiasen <tmm@image.dk>
-
-*/
-
-/* These settings are for various debug-level. Leave they untouched ... */
-#define  NO_GSCD_DEBUG
-#define  NO_IOCTL_DEBUG
-#define  NO_MODULE_DEBUG
-#define  NO_FUTURE_WORK
-/*------------------------*/
-
-#include <linux/module.h>
-
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#define MAJOR_NR GOLDSTAR_CDROM_MAJOR
-#include <linux/blkdev.h>
-#include "gscd.h"
-
-static int gscdPresent = 0;
-
-static unsigned char gscd_buf[2048];	/* buffer for block size conversion */
-static int gscd_bn = -1;
-static short gscd_port = GSCD_BASE_ADDR;
-module_param_named(gscd, gscd_port, short, 0);
-
-/* Kommt spaeter vielleicht noch mal dran ...
- *    static DECLARE_WAIT_QUEUE_HEAD(gscd_waitq);
- */
-
-static void gscd_read_cmd(struct request *req);
-static void gscd_hsg2msf(long hsg, struct msf *msf);
-static void gscd_bin2bcd(unsigned char *p);
-
-/* Schnittstellen zum Kern/FS */
-
-static void __do_gscd_request(unsigned long dummy);
-static int gscd_ioctl(struct inode *, struct file *, unsigned int,
-		      unsigned long);
-static int gscd_open(struct inode *, struct file *);
-static int gscd_release(struct inode *, struct file *);
-static int check_gscd_med_chg(struct gendisk *disk);
-
-/*      GoldStar Funktionen    */
-
-static void cmd_out(int, char *, char *, int);
-static void cmd_status(void);
-static void init_cd_drive(int);
-
-static int get_status(void);
-static void clear_Audio(void);
-static void cc_invalidate(void);
-
-/* some things for the next version */
-#ifdef FUTURE_WORK
-static void update_state(void);
-static long gscd_msf2hsg(struct msf *mp);
-static int gscd_bcd2bin(unsigned char bcd);
-#endif
-
-
-/*      lo-level cmd-Funktionen    */
-
-static void cmd_info_in(char *, int);
-static void cmd_end(void);
-static void cmd_read_b(char *, int, int);
-static void cmd_read_w(char *, int, int);
-static int cmd_unit_alive(void);
-static void cmd_write_cmd(char *);
-
-
-/*      GoldStar Variablen     */
-
-static int curr_drv_state;
-static int drv_states[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
-static int drv_mode;
-static int disk_state;
-static int speed;
-static int ndrives;
-
-static unsigned char drv_num_read;
-static unsigned char f_dsk_valid;
-static unsigned char current_drive;
-static unsigned char f_drv_ok;
-
-
-static char f_AudioPlay;
-static char f_AudioPause;
-static int AudioStart_m;
-static int AudioStart_f;
-static int AudioEnd_m;
-static int AudioEnd_f;
-
-static DEFINE_TIMER(gscd_timer, NULL, 0, 0);
-static DEFINE_SPINLOCK(gscd_lock);
-static struct request_queue *gscd_queue;
-
-static struct block_device_operations gscd_fops = {
-	.owner		= THIS_MODULE,
-	.open		= gscd_open,
-	.release	= gscd_release,
-	.ioctl		= gscd_ioctl,
-	.media_changed	= check_gscd_med_chg,
-};
-
-/* 
- * Checking if the media has been changed
- * (not yet implemented)
- */
-static int check_gscd_med_chg(struct gendisk *disk)
-{
-#ifdef GSCD_DEBUG
-	printk("gscd: check_med_change\n");
-#endif
-	return 0;
-}
-
-
-#ifndef MODULE
-/* Using new interface for kernel-parameters */
-
-static int __init gscd_setup(char *str)
-{
-	int ints[2];
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-
-	if (ints[0] > 0) {
-		gscd_port = ints[1];
-	}
-	return 1;
-}
-
-__setup("gscd=", gscd_setup);
-
-#endif
-
-static int gscd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
-		      unsigned long arg)
-{
-	unsigned char to_do[10];
-	unsigned char dummy;
-
-
-	switch (cmd) {
-	case CDROMSTART:	/* Spin up the drive */
-		/* Don't think we can do this.  Even if we could,
-		 * I think the drive times out and stops after a while
-		 * anyway.  For now, ignore it.
-		 */
-		return 0;
-
-	case CDROMRESUME:	/* keine Ahnung was das ist */
-		return 0;
-
-
-	case CDROMEJECT:
-		cmd_status();
-		to_do[0] = CMD_TRAY_CTL;
-		cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-
-		return 0;
-
-	default:
-		return -EINVAL;
-	}
-
-}
-
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-
-static void gscd_transfer(struct request *req)
-{
-	while (req->nr_sectors > 0 && gscd_bn == req->sector / 4) {
-		long offs = (req->sector & 3) * 512;
-		memcpy(req->buffer, gscd_buf + offs, 512);
-		req->nr_sectors--;
-		req->sector++;
-		req->buffer += 512;
-	}
-}
-
-
-/*
- * I/O request routine called from Linux kernel.
- */
-
-static void do_gscd_request(request_queue_t * q)
-{
-	__do_gscd_request(0);
-}
-
-static void __do_gscd_request(unsigned long dummy)
-{
-	struct request *req;
-	unsigned int block;
-	unsigned int nsect;
-
-repeat:
-	req = elv_next_request(gscd_queue);
-	if (!req)
-		return;
-
-	block = req->sector;
-	nsect = req->nr_sectors;
-
-	if (req->sector == -1)
-		goto out;
-
-	if (req->cmd != READ) {
-		printk("GSCD: bad cmd %u\n", rq_data_dir(req));
-		end_request(req, 0);
-		goto repeat;
-	}
-
-	gscd_transfer(req);
-
-	/* if we satisfied the request from the buffer, we're done. */
-
-	if (req->nr_sectors == 0) {
-		end_request(req, 1);
-		goto repeat;
-	}
-#ifdef GSCD_DEBUG
-	printk("GSCD: block %d, nsect %d\n", block, nsect);
-#endif
-	gscd_read_cmd(req);
-out:
-	return;
-}
-
-
-
-/*
- * Check the result of the set-mode command.  On success, send the
- * read-data command.
- */
-
-static void gscd_read_cmd(struct request *req)
-{
-	long block;
-	struct gscd_Play_msf gscdcmd;
-	char cmd[] = { CMD_READ, 0x80, 0, 0, 0, 0, 1 };	/* cmd mode M-S-F secth sectl */
-
-	cmd_status();
-	if (disk_state & (ST_NO_DISK | ST_DOOR_OPEN)) {
-		printk("GSCD: no disk or door open\n");
-		end_request(req, 0);
-	} else {
-		if (disk_state & ST_INVALID) {
-			printk("GSCD: disk invalid\n");
-			end_request(req, 0);
-		} else {
-			gscd_bn = -1;	/* purge our buffer */
-			block = req->sector / 4;
-			gscd_hsg2msf(block, &gscdcmd.start);	/* cvt to msf format */
-
-			cmd[2] = gscdcmd.start.min;
-			cmd[3] = gscdcmd.start.sec;
-			cmd[4] = gscdcmd.start.frame;
-
-#ifdef GSCD_DEBUG
-			printk("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3],
-			       cmd[4]);
-#endif
-			cmd_out(TYPE_DATA, (char *) &cmd,
-				(char *) &gscd_buf[0], 1);
-
-			gscd_bn = req->sector / 4;
-			gscd_transfer(req);
-			end_request(req, 1);
-		}
-	}
-	SET_TIMER(__do_gscd_request, 1);
-}
-
-
-/*
- * Open the device special file.  Check that a disk is in.
- */
-
-static int gscd_open(struct inode *ip, struct file *fp)
-{
-	int st;
-
-#ifdef GSCD_DEBUG
-	printk("GSCD: open\n");
-#endif
-
-	if (gscdPresent == 0)
-		return -ENXIO;	/* no hardware */
-
-	get_status();
-	st = disk_state & (ST_NO_DISK | ST_DOOR_OPEN);
-	if (st) {
-		printk("GSCD: no disk or door open\n");
-		return -ENXIO;
-	}
-
-/*	if (updateToc() < 0)
-		return -EIO;
-*/
-
-	return 0;
-}
-
-
-/*
- * On close, we flush all gscd blocks from the buffer cache.
- */
-
-static int gscd_release(struct inode *inode, struct file *file)
-{
-
-#ifdef GSCD_DEBUG
-	printk("GSCD: release\n");
-#endif
-
-	gscd_bn = -1;
-
-	return 0;
-}
-
-
-static int get_status(void)
-{
-	int status;
-
-	cmd_status();
-	status = disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01);
-
-	if (status == (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) {
-		cc_invalidate();
-		return 1;
-	} else {
-		return 0;
-	}
-}
-
-
-static void cc_invalidate(void)
-{
-	drv_num_read = 0xFF;
-	f_dsk_valid = 0xFF;
-	current_drive = 0xFF;
-	f_drv_ok = 0xFF;
-
-	clear_Audio();
-
-}
-
-static void clear_Audio(void)
-{
-
-	f_AudioPlay = 0;
-	f_AudioPause = 0;
-	AudioStart_m = 0;
-	AudioStart_f = 0;
-	AudioEnd_m = 0;
-	AudioEnd_f = 0;
-
-}
-
-/*
- *   waiting ?  
- */
-
-static int wait_drv_ready(void)
-{
-	int found, read;
-
-	do {
-		found = inb(GSCDPORT(0));
-		found &= 0x0f;
-		read = inb(GSCDPORT(0));
-		read &= 0x0f;
-	} while (read != found);
-
-#ifdef GSCD_DEBUG
-	printk("Wait for: %d\n", read);
-#endif
-
-	return read;
-}
-
-static void cc_Ident(char *respons)
-{
-	char to_do[] = { CMD_IDENT, 0, 0 };
-
-	cmd_out(TYPE_INFO, (char *) &to_do, (char *) respons, (int) 0x1E);
-
-}
-
-static void cc_SetSpeed(void)
-{
-	char to_do[] = { CMD_SETSPEED, 0, 0 };
-	char dummy;
-
-	if (speed > 0) {
-		to_do[1] = speed & 0x0F;
-		cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-	}
-}
-
-static void cc_Reset(void)
-{
-	char to_do[] = { CMD_RESET, 0 };
-	char dummy;
-
-	cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-}
-
-static void cmd_status(void)
-{
-	char to_do[] = { CMD_STATUS, 0 };
-	char dummy;
-
-	cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
-
-#ifdef GSCD_DEBUG
-	printk("GSCD: Status: %d\n", disk_state);
-#endif
-
-}
-
-static void cmd_out(int cmd_type, char *cmd, char *respo_buf, int respo_count)
-{
-	int result;
-
-
-	result = wait_drv_ready();
-	if (result != drv_mode) {
-		unsigned long test_loops = 0xFFFF;
-		int i, dummy;
-
-		outb(curr_drv_state, GSCDPORT(0));
-
-		/* LOCLOOP_170 */
-		do {
-			result = wait_drv_ready();
-			test_loops--;
-		} while ((result != drv_mode) && (test_loops > 0));
-
-		if (result != drv_mode) {
-			disk_state = ST_x08 | ST_x04 | ST_INVALID;
-			return;
-		}
-
-		/* ...and waiting */
-		for (i = 1, dummy = 1; i < 0xFFFF; i++) {
-			dummy *= i;
-		}
-	}
-
-	/* LOC_172 */
-	/* check the unit */
-	/* and wake it up */
-	if (cmd_unit_alive() != 0x08) {
-		/* LOC_174 */
-		/* game over for this unit */
-		disk_state = ST_x08 | ST_x04 | ST_INVALID;
-		return;
-	}
-
-	/* LOC_176 */
-#ifdef GSCD_DEBUG
-	printk("LOC_176 ");
-#endif
-	if (drv_mode == 0x09) {
-		/* magic... */
-		printk("GSCD: magic ...\n");
-		outb(result, GSCDPORT(2));
-	}
-
-	/* write the command to the drive */
-	cmd_write_cmd(cmd);
-
-	/* LOC_178 */
-	for (;;) {
-		result = wait_drv_ready();
-		if (result != drv_mode) {
-			/* LOC_179 */
-			if (result == 0x04) {	/* Mode 4 */
-				/* LOC_205 */
-#ifdef GSCD_DEBUG
-				printk("LOC_205 ");
-#endif
-				disk_state = inb(GSCDPORT(2));
-
-				do {
-					result = wait_drv_ready();
-				} while (result != drv_mode);
-				return;
-
-			} else {
-				if (result == 0x06) {	/* Mode 6 */
-					/* LOC_181 */
-#ifdef GSCD_DEBUG
-					printk("LOC_181 ");
-#endif
-
-					if (cmd_type == TYPE_DATA) {
-						/* read data */
-						/* LOC_184 */
-						if (drv_mode == 9) {
-							/* read the data to the buffer (word) */
-
-							/* (*(cmd+1))?(CD_FRAMESIZE/2):(CD_FRAMESIZE_RAW/2) */
-							cmd_read_w
-							    (respo_buf,
-							     respo_count,
-							     CD_FRAMESIZE /
-							     2);
-							return;
-						} else {
-							/* read the data to the buffer (byte) */
-
-							/* (*(cmd+1))?(CD_FRAMESIZE):(CD_FRAMESIZE_RAW)    */
-							cmd_read_b
-							    (respo_buf,
-							     respo_count,
-							     CD_FRAMESIZE);
-							return;
-						}
-					} else {
-						/* read the info to the buffer */
-						cmd_info_in(respo_buf,
-							    respo_count);
-						return;
-					}
-
-					return;
-				}
-			}
-
-		} else {
-			disk_state = ST_x08 | ST_x04 | ST_INVALID;
-			return;
-		}
-	}			/* for (;;) */
-
-
-#ifdef GSCD_DEBUG
-	printk("\n");
-#endif
-}
-
-
-static void cmd_write_cmd(char *pstr)
-{
-	int i, j;
-
-	/* LOC_177 */
-#ifdef GSCD_DEBUG
-	printk("LOC_177 ");
-#endif
-
-	/* calculate the number of parameter */
-	j = *pstr & 0x0F;
-
-	/* shift it out */
-	for (i = 0; i < j; i++) {
-		outb(*pstr, GSCDPORT(2));
-		pstr++;
-	}
-}
-
-
-static int cmd_unit_alive(void)
-{
-	int result;
-	unsigned long max_test_loops;
-
-
-	/* LOC_172 */
-#ifdef GSCD_DEBUG
-	printk("LOC_172 ");
-#endif
-
-	outb(curr_drv_state, GSCDPORT(0));
-	max_test_loops = 0xFFFF;
-
-	do {
-		result = wait_drv_ready();
-		max_test_loops--;
-	} while ((result != 0x08) && (max_test_loops > 0));
-
-	return result;
-}
-
-
-static void cmd_info_in(char *pb, int count)
-{
-	int result;
-	char read;
-
-
-	/* read info */
-	/* LOC_182 */
-#ifdef GSCD_DEBUG
-	printk("LOC_182 ");
-#endif
-
-	do {
-		read = inb(GSCDPORT(2));
-		if (count > 0) {
-			*pb = read;
-			pb++;
-			count--;
-		}
-
-		/* LOC_183 */
-		do {
-			result = wait_drv_ready();
-		} while (result == 0x0E);
-	} while (result == 6);
-
-	cmd_end();
-	return;
-}
-
-
-static void cmd_read_b(char *pb, int count, int size)
-{
-	int result;
-	int i;
-
-
-	/* LOC_188 */
-	/* LOC_189 */
-#ifdef GSCD_DEBUG
-	printk("LOC_189 ");
-#endif
-
-	do {
-		do {
-			result = wait_drv_ready();
-		} while (result != 6 || result == 0x0E);
-
-		if (result != 6) {
-			cmd_end();
-			return;
-		}
-#ifdef GSCD_DEBUG
-		printk("LOC_191 ");
-#endif
-
-		for (i = 0; i < size; i++) {
-			*pb = inb(GSCDPORT(2));
-			pb++;
-		}
-		count--;
-	} while (count > 0);
-
-	cmd_end();
-	return;
-}
-
-
-static void cmd_end(void)
-{
-	int result;
-
-
-	/* LOC_204 */
-#ifdef GSCD_DEBUG
-	printk("LOC_204 ");
-#endif
-
-	do {
-		result = wait_drv_ready();
-		if (result == drv_mode) {
-			return;
-		}
-	} while (result != 4);
-
-	/* LOC_205 */
-#ifdef GSCD_DEBUG
-	printk("LOC_205 ");
-#endif
-
-	disk_state = inb(GSCDPORT(2));
-
-	do {
-		result = wait_drv_ready();
-	} while (result != drv_mode);
-	return;
-
-}
-
-
-static void cmd_read_w(char *pb, int count, int size)
-{
-	int result;
-	int i;
-
-
-#ifdef GSCD_DEBUG
-	printk("LOC_185 ");
-#endif
-
-	do {
-		/* LOC_185 */
-		do {
-			result = wait_drv_ready();
-		} while (result != 6 || result == 0x0E);
-
-		if (result != 6) {
-			cmd_end();
-			return;
-		}
-
-		for (i = 0; i < size; i++) {
-			/* na, hier muss ich noch mal drueber nachdenken */
-			*pb = inw(GSCDPORT(2));
-			pb++;
-		}
-		count--;
-	} while (count > 0);
-
-	cmd_end();
-	return;
-}
-
-static int __init find_drives(void)
-{
-	int *pdrv;
-	int drvnum;
-	int subdrv;
-	int i;
-
-	speed = 0;
-	pdrv = (int *) &drv_states;
-	curr_drv_state = 0xFE;
-	subdrv = 0;
-	drvnum = 0;
-
-	for (i = 0; i < 8; i++) {
-		subdrv++;
-		cmd_status();
-		disk_state &= ST_x08 | ST_x04 | ST_INVALID | ST_x01;
-		if (disk_state != (ST_x08 | ST_x04 | ST_INVALID)) {
-			/* LOC_240 */
-			*pdrv = curr_drv_state;
-			init_cd_drive(drvnum);
-			pdrv++;
-			drvnum++;
-		} else {
-			if (subdrv < 2) {
-				continue;
-			} else {
-				subdrv = 0;
-			}
-		}
-
-/*       curr_drv_state<<1;         <-- das geht irgendwie nicht */
-/* muss heissen:    curr_drv_state <<= 1; (ist ja Wert-Zuweisung) */
-		curr_drv_state *= 2;
-		curr_drv_state |= 1;
-#ifdef GSCD_DEBUG
-		printk("DriveState: %d\n", curr_drv_state);
-#endif
-	}
-
-	ndrives = drvnum;
-	return drvnum;
-}
-
-static void __init init_cd_drive(int num)
-{
-	char resp[50];
-	int i;
-
-	printk("GSCD: init unit %d\n", num);
-	cc_Ident((char *) &resp);
-
-	printk("GSCD: identification: ");
-	for (i = 0; i < 0x1E; i++) {
-		printk("%c", resp[i]);
-	}
-	printk("\n");
-
-	cc_SetSpeed();
-
-}
-
-#ifdef FUTURE_WORK
-/* return_done */
-static void update_state(void)
-{
-	unsigned int AX;
-
-
-	if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) == 0) {
-		if (disk_state == (ST_x08 | ST_x04 | ST_INVALID)) {
-			AX = ST_INVALID;
-		}
-
-		if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01))
-		    == 0) {
-			invalidate();
-			f_drv_ok = 0;
-		}
-
-		AX |= 0x8000;
-	}
-
-	if (disk_state & ST_PLAYING) {
-		AX |= 0x200;
-	}
-
-	AX |= 0x100;
-	/* pkt_esbx = AX; */
-
-	disk_state = 0;
-
-}
-#endif
-
-static struct gendisk *gscd_disk;
-
-static void __exit gscd_exit(void)
-{
-	CLEAR_TIMER;
-
-	del_gendisk(gscd_disk);
-	put_disk(gscd_disk);
-	if ((unregister_blkdev(MAJOR_NR, "gscd") == -EINVAL)) {
-		printk("What's that: can't unregister GoldStar-module\n");
-		return;
-	}
-	blk_cleanup_queue(gscd_queue);
-	release_region(gscd_port, GSCD_IO_EXTENT);
-	printk(KERN_INFO "GoldStar-module released.\n");
-}
-
-/* This is the common initialisation for the GoldStar drive. */
-/* It is called at boot time AND for module init.           */
-static int __init gscd_init(void)
-{
-	int i;
-	int result;
-	int ret=0;
-
-	printk(KERN_INFO "GSCD: version %s\n", GSCD_VERSION);
-	printk(KERN_INFO
-	       "GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n",
-	       gscd_port);
-
-	if (!request_region(gscd_port, GSCD_IO_EXTENT, "gscd")) {
-		printk(KERN_WARNING "GSCD: Init failed, I/O port (%X) already"
-		       " in use.\n", gscd_port);
-		return -EIO;
-	}
-
-
-	/* check for card */
-	result = wait_drv_ready();
-	if (result == 0x09) {
-		printk(KERN_WARNING "GSCD: DMA kann ich noch nicht!\n");
-		ret = -EIO;
-		goto err_out1;
-	}
-
-	if (result == 0x0b) {
-		drv_mode = result;
-		i = find_drives();
-		if (i == 0) {
-			printk(KERN_WARNING "GSCD: GoldStar CD-ROM Drive is"
-			       " not found.\n");
-			ret = -EIO;
-			goto err_out1;
-		}
-	}
-
-	if ((result != 0x0b) && (result != 0x09)) {
-		printk(KERN_WARNING "GSCD: GoldStar Interface Adapter does not "
-		       "exist or H/W error\n");
-		ret = -EIO;
-		goto err_out1;
-	}
-
-	/* reset all drives */
-	i = 0;
-	while (drv_states[i] != 0) {
-		curr_drv_state = drv_states[i];
-		printk(KERN_INFO "GSCD: Reset unit %d ... ", i);
-		cc_Reset();
-		printk("done\n");
-		i++;
-	}
-
-	gscd_disk = alloc_disk(1);
-	if (!gscd_disk)
-		goto err_out1;
-	gscd_disk->major = MAJOR_NR;
-	gscd_disk->first_minor = 0;
-	gscd_disk->fops = &gscd_fops;
-	sprintf(gscd_disk->disk_name, "gscd");
-
-	if (register_blkdev(MAJOR_NR, "gscd")) {
-		ret = -EIO;
-		goto err_out2;
-	}
-
-	gscd_queue = blk_init_queue(do_gscd_request, &gscd_lock);
-	if (!gscd_queue) {
-		ret = -ENOMEM;
-		goto err_out3;
-	}
-
-	disk_state = 0;
-	gscdPresent = 1;
-
-	gscd_disk->queue = gscd_queue;
-	add_disk(gscd_disk);
-
-	printk(KERN_INFO "GSCD: GoldStar CD-ROM Drive found.\n");
-	return 0;
-
-err_out3:
-	unregister_blkdev(MAJOR_NR, "gscd");
-err_out2:
-	put_disk(gscd_disk);
-err_out1:
-	release_region(gscd_port, GSCD_IO_EXTENT);
-	return ret;
-}
-
-static void gscd_hsg2msf(long hsg, struct msf *msf)
-{
-	hsg += CD_MSF_OFFSET;
-	msf->min = hsg / (CD_FRAMES * CD_SECS);
-	hsg %= CD_FRAMES * CD_SECS;
-	msf->sec = hsg / CD_FRAMES;
-	msf->frame = hsg % CD_FRAMES;
-
-	gscd_bin2bcd(&msf->min);	/* convert to BCD */
-	gscd_bin2bcd(&msf->sec);
-	gscd_bin2bcd(&msf->frame);
-}
-
-
-static void gscd_bin2bcd(unsigned char *p)
-{
-	int u, t;
-
-	u = *p % 10;
-	t = *p / 10;
-	*p = u | (t << 4);
-}
-
-
-#ifdef FUTURE_WORK
-static long gscd_msf2hsg(struct msf *mp)
-{
-	return gscd_bcd2bin(mp->frame)
-	    + gscd_bcd2bin(mp->sec) * CD_FRAMES
-	    + gscd_bcd2bin(mp->min) * CD_FRAMES * CD_SECS - CD_MSF_OFFSET;
-}
-
-static int gscd_bcd2bin(unsigned char bcd)
-{
-	return (bcd >> 4) * 10 + (bcd & 0xF);
-}
-#endif
-
-MODULE_AUTHOR("Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>");
-MODULE_LICENSE("GPL");
-module_init(gscd_init);
-module_exit(gscd_exit);
-MODULE_ALIAS_BLOCKDEV_MAJOR(GOLDSTAR_CDROM_MAJOR);
diff --git a/drivers/cdrom/gscd.h b/drivers/cdrom/gscd.h
deleted file mode 100644
index a41e64bfc061..000000000000
--- a/drivers/cdrom/gscd.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Definitions for a GoldStar R420 CD-ROM interface
- *
- *   Copyright (C) 1995  Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
- *                       Eberhard Moenkeberg <emoenke@gwdg.de>
- *
- *  Published under the GPL.
- *
- */
-
-
-/* The Interface Card default address is 0x340. This will work for most
-   applications. Address selection is accomplished by jumpers PN801-1 to
-   PN801-4 on the GoldStar Interface Card.
-   Appropriate settings are: 0x300, 0x310, 0x320, 0x330, 0x340, 0x350, 0x360
-   0x370, 0x380, 0x390, 0x3A0, 0x3B0, 0x3C0, 0x3D0, 0x3E0, 0x3F0             */
-
-/* insert here the I/O port address and extent */
-#define GSCD_BASE_ADDR	        0x340
-#define GSCD_IO_EXTENT          4
-
-
-/************** nothing to set up below here *********************/
-
-/* port access macro */
-#define GSCDPORT(x)		(gscd_port + (x))
-
-/*
- * commands
- * the lower nibble holds the command length
- */
-#define CMD_STATUS     0x01
-#define CMD_READSUBQ   0x02 /* 1: ?, 2: UPC, 5: ? */
-#define CMD_SEEK       0x05 /* read_mode M-S-F */
-#define CMD_READ       0x07 /* read_mode M-S-F nsec_h nsec_l */
-#define CMD_RESET      0x11
-#define CMD_SETMODE    0x15
-#define CMD_PLAY       0x17 /* M-S-F M-S-F */
-#define CMD_LOCK_CTL   0x22 /* 0: unlock, 1: lock */
-#define CMD_IDENT      0x31
-#define CMD_SETSPEED   0x32 /* 0: auto */ /* ??? */
-#define CMD_GETMODE    0x41
-#define CMD_PAUSE      0x51
-#define CMD_READTOC    0x61
-#define CMD_DISKINFO   0x71
-#define CMD_TRAY_CTL   0x81
-
-/*
- * disk_state:
- */
-#define ST_PLAYING	0x80
-#define ST_UNLOCKED	0x40
-#define ST_NO_DISK	0x20
-#define ST_DOOR_OPEN	0x10
-#define ST_x08  0x08
-#define ST_x04	0x04
-#define ST_INVALID	0x02
-#define ST_x01	0x01
-
-/*
- * cmd_type:
- */
-#define TYPE_INFO	0x01
-#define TYPE_DATA	0x02
-
-/*
- * read_mode:
- */
-#define MOD_POLLED	0x80
-#define MOD_x08	0x08
-#define MOD_RAW	0x04
-
-#define READ_DATA(port, buf, nr) insb(port, buf, nr)
-
-#define SET_TIMER(func, jifs) \
-	((mod_timer(&gscd_timer, jiffies + jifs)), \
-	(gscd_timer.function = func))
-
-#define CLEAR_TIMER		del_timer_sync(&gscd_timer)
-
-#define MAX_TRACKS		104
-
-struct msf {
-	unsigned char	min;
-	unsigned char	sec;
-	unsigned char	frame;
-};
-
-struct gscd_Play_msf {
-	struct msf	start;
-	struct msf	end;
-};
-
-struct gscd_DiskInfo {
-	unsigned char	first;
-	unsigned char	last;
-	struct msf	diskLength;
-	struct msf	firstTrack;
-};
-
-struct gscd_Toc {
-	unsigned char	ctrl_addr;
-	unsigned char	track;
-	unsigned char	pointIndex;
-	struct msf	trackTime;
-	struct msf	diskTime;
-};
-
diff --git a/drivers/cdrom/isp16.c b/drivers/cdrom/isp16.c
deleted file mode 100644
index db0fd9a240e3..000000000000
--- a/drivers/cdrom/isp16.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/* -- ISP16 cdrom detection and configuration
- *
- *    Copyright (c) 1995,1996 Eric van der Maarel <H.T.M.v.d.Maarel@marin.nl>
- *
- *    Version 0.6
- *
- *    History:
- *    0.5 First release.
- *        Was included in the sjcd and optcd cdrom drivers.
- *    0.6 First "stand-alone" version.
- *        Removed sound configuration.
- *        Added "module" support.
- *
- *      9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	                   Removed init_module & cleanup_module in favor of 
- *			   module_init & module_exit.
- *			   Torben Mathiasen <tmm@image.dk>
- *
- *     19 June 2004     -- check_region() converted to request_region()
- *                         and return statement cleanups.
- *                          - Jesper Juhl
- *
- *    Detect cdrom interface on ISP16 sound card.
- *    Configure cdrom interface.
- *
- *    Algorithm for the card with OPTi 82C928 taken
- *    from the CDSETUP.SYS driver for MSDOS,
- *    by OPTi Computers, version 2.03.
- *    Algorithm for the card with OPTi 82C929 as communicated
- *    to me by Vadim Model and Leo Spiekman.
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#define ISP16_VERSION_MAJOR 0
-#define ISP16_VERSION_MINOR 6
-
-#include <linux/module.h>
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include "isp16.h"
-
-static short isp16_detect(void);
-static short isp16_c928__detect(void);
-static short isp16_c929__detect(void);
-static short isp16_cdi_config(int base, u_char drive_type, int irq,
-			      int dma);
-static short isp16_type;	/* dependent on type of interface card */
-static u_char isp16_ctrl;
-static u_short isp16_enable_port;
-
-static int isp16_cdrom_base = ISP16_CDROM_IO_BASE;
-static int isp16_cdrom_irq = ISP16_CDROM_IRQ;
-static int isp16_cdrom_dma = ISP16_CDROM_DMA;
-static char *isp16_cdrom_type = ISP16_CDROM_TYPE;
-
-module_param(isp16_cdrom_base, int, 0);
-module_param(isp16_cdrom_irq, int, 0);
-module_param(isp16_cdrom_dma, int, 0);
-module_param(isp16_cdrom_type, charp, 0);
-
-#define ISP16_IN(p) (outb(isp16_ctrl,ISP16_CTRL_PORT), inb(p))
-#define ISP16_OUT(p,b) (outb(isp16_ctrl,ISP16_CTRL_PORT), outb(b,p))
-
-#ifndef MODULE
-
-static int
-__init isp16_setup(char *str)
-{
-	int ints[4];
-
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-	if (ints[0] > 0)
-		isp16_cdrom_base = ints[1];
-	if (ints[0] > 1)
-		isp16_cdrom_irq = ints[2];
-	if (ints[0] > 2)
-		isp16_cdrom_dma = ints[3];
-	if (str)
-		isp16_cdrom_type = str;
-
-	return 1;
-}
-
-__setup("isp16=", isp16_setup);
-
-#endif				/* MODULE */
-
-/*
- *  ISP16 initialisation.
- *
- */
-static int __init isp16_init(void)
-{
-	u_char expected_drive;
-
-	printk(KERN_INFO
-	       "ISP16: configuration cdrom interface, version %d.%d.\n",
-	       ISP16_VERSION_MAJOR, ISP16_VERSION_MINOR);
-
-	if (!strcmp(isp16_cdrom_type, "noisp16")) {
-		printk("ISP16: no cdrom interface configured.\n");
-		return 0;
-	}
-
-	if (!request_region(ISP16_IO_BASE, ISP16_IO_SIZE, "isp16")) {
-		printk("ISP16: i/o ports already in use.\n");
-		goto out;
-	}
-
-	if ((isp16_type = isp16_detect()) < 0) {
-		printk("ISP16: no cdrom interface found.\n");
-		goto cleanup_out;
-	}
-
-	printk(KERN_INFO
-	       "ISP16: cdrom interface (with OPTi 82C92%d chip) detected.\n",
-	       (isp16_type == 2) ? 9 : 8);
-
-	if (!strcmp(isp16_cdrom_type, "Sanyo"))
-		expected_drive =
-		    (isp16_type ? ISP16_SANYO1 : ISP16_SANYO0);
-	else if (!strcmp(isp16_cdrom_type, "Sony"))
-		expected_drive = ISP16_SONY;
-	else if (!strcmp(isp16_cdrom_type, "Panasonic"))
-		expected_drive =
-		    (isp16_type ? ISP16_PANASONIC1 : ISP16_PANASONIC0);
-	else if (!strcmp(isp16_cdrom_type, "Mitsumi"))
-		expected_drive = ISP16_MITSUMI;
-	else {
-		printk("ISP16: %s not supported by cdrom interface.\n",
-		       isp16_cdrom_type);
-		goto cleanup_out;
-	}
-
-	if (isp16_cdi_config(isp16_cdrom_base, expected_drive,
-			     isp16_cdrom_irq, isp16_cdrom_dma) < 0) {
-		printk
-		    ("ISP16: cdrom interface has not been properly configured.\n");
-		goto cleanup_out;
-	}
-	printk(KERN_INFO
-	       "ISP16: cdrom interface set up with io base 0x%03X, irq %d, dma %d,"
-	       " type %s.\n", isp16_cdrom_base, isp16_cdrom_irq,
-	       isp16_cdrom_dma, isp16_cdrom_type);
-	return 0;
-
-cleanup_out:
-	release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
-out:
-	return -EIO;
-}
-
-static short __init isp16_detect(void)
-{
-
-	if (isp16_c929__detect() >= 0)
-		return 2;
-	else
-		return (isp16_c928__detect());
-}
-
-static short __init isp16_c928__detect(void)
-{
-	u_char ctrl;
-	u_char enable_cdrom;
-	u_char io;
-	short i = -1;
-
-	isp16_ctrl = ISP16_C928__CTRL;
-	isp16_enable_port = ISP16_C928__ENABLE_PORT;
-
-	/* read' and write' are a special read and write, respectively */
-
-	/* read' ISP16_CTRL_PORT, clear last two bits and write' back the result */
-	ctrl = ISP16_IN(ISP16_CTRL_PORT) & 0xFC;
-	ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
-	/* read' 3,4 and 5-bit from the cdrom enable port */
-	enable_cdrom = ISP16_IN(ISP16_C928__ENABLE_PORT) & 0x38;
-
-	if (!(enable_cdrom & 0x20)) {	/* 5-bit not set */
-		/* read' last 2 bits of ISP16_IO_SET_PORT */
-		io = ISP16_IN(ISP16_IO_SET_PORT) & 0x03;
-		if (((io & 0x01) << 1) == (io & 0x02)) {	/* bits are the same */
-			if (io == 0) {	/* ...the same and 0 */
-				i = 0;
-				enable_cdrom |= 0x20;
-			} else {	/* ...the same and 1 *//* my card, first time 'round */
-				i = 1;
-				enable_cdrom |= 0x28;
-			}
-			ISP16_OUT(ISP16_C928__ENABLE_PORT, enable_cdrom);
-		} else {	/* bits are not the same */
-			ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-			return i;	/* -> not detected: possibly incorrect conclusion */
-		}
-	} else if (enable_cdrom == 0x20)
-		i = 0;
-	else if (enable_cdrom == 0x28)	/* my card, already initialised */
-		i = 1;
-
-	ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
-	return i;
-}
-
-static short __init isp16_c929__detect(void)
-{
-	u_char ctrl;
-	u_char tmp;
-
-	isp16_ctrl = ISP16_C929__CTRL;
-	isp16_enable_port = ISP16_C929__ENABLE_PORT;
-
-	/* read' and write' are a special read and write, respectively */
-
-	/* read' ISP16_CTRL_PORT and save */
-	ctrl = ISP16_IN(ISP16_CTRL_PORT);
-
-	/* write' zero to the ctrl port and get response */
-	ISP16_OUT(ISP16_CTRL_PORT, 0);
-	tmp = ISP16_IN(ISP16_CTRL_PORT);
-
-	if (tmp != 2)		/* isp16 with 82C929 not detected */
-		return -1;
-
-	/* restore ctrl port value */
-	ISP16_OUT(ISP16_CTRL_PORT, ctrl);
-
-	return 2;
-}
-
-static short __init
-isp16_cdi_config(int base, u_char drive_type, int irq, int dma)
-{
-	u_char base_code;
-	u_char irq_code;
-	u_char dma_code;
-	u_char i;
-
-	if ((drive_type == ISP16_MITSUMI) && (dma != 0))
-		printk("ISP16: Mitsumi cdrom drive has no dma support.\n");
-
-	switch (base) {
-	case 0x340:
-		base_code = ISP16_BASE_340;
-		break;
-	case 0x330:
-		base_code = ISP16_BASE_330;
-		break;
-	case 0x360:
-		base_code = ISP16_BASE_360;
-		break;
-	case 0x320:
-		base_code = ISP16_BASE_320;
-		break;
-	default:
-		printk
-		    ("ISP16: base address 0x%03X not supported by cdrom interface.\n",
-		     base);
-		return -1;
-	}
-	switch (irq) {
-	case 0:
-		irq_code = ISP16_IRQ_X;
-		break;		/* disable irq */
-	case 5:
-		irq_code = ISP16_IRQ_5;
-		printk("ISP16: irq 5 shouldn't be used by cdrom interface,"
-		       " due to possible conflicts with the sound card.\n");
-		break;
-	case 7:
-		irq_code = ISP16_IRQ_7;
-		printk("ISP16: irq 7 shouldn't be used by cdrom interface,"
-		       " due to possible conflicts with the sound card.\n");
-		break;
-	case 3:
-		irq_code = ISP16_IRQ_3;
-		break;
-	case 9:
-		irq_code = ISP16_IRQ_9;
-		break;
-	case 10:
-		irq_code = ISP16_IRQ_10;
-		break;
-	case 11:
-		irq_code = ISP16_IRQ_11;
-		break;
-	default:
-		printk("ISP16: irq %d not supported by cdrom interface.\n",
-		       irq);
-		return -1;
-	}
-	switch (dma) {
-	case 0:
-		dma_code = ISP16_DMA_X;
-		break;		/* disable dma */
-	case 1:
-		printk("ISP16: dma 1 cannot be used by cdrom interface,"
-		       " due to conflict with the sound card.\n");
-		return -1;
-		break;
-	case 3:
-		dma_code = ISP16_DMA_3;
-		break;
-	case 5:
-		dma_code = ISP16_DMA_5;
-		break;
-	case 6:
-		dma_code = ISP16_DMA_6;
-		break;
-	case 7:
-		dma_code = ISP16_DMA_7;
-		break;
-	default:
-		printk("ISP16: dma %d not supported by cdrom interface.\n",
-		       dma);
-		return -1;
-	}
-
-	if (drive_type != ISP16_SONY && drive_type != ISP16_PANASONIC0 &&
-	    drive_type != ISP16_PANASONIC1 && drive_type != ISP16_SANYO0 &&
-	    drive_type != ISP16_SANYO1 && drive_type != ISP16_MITSUMI &&
-	    drive_type != ISP16_DRIVE_X) {
-		printk
-		    ("ISP16: drive type (code 0x%02X) not supported by cdrom"
-		     " interface.\n", drive_type);
-		return -1;
-	}
-
-	/* set type of interface */
-	i = ISP16_IN(ISP16_DRIVE_SET_PORT) & ISP16_DRIVE_SET_MASK;	/* clear some bits */
-	ISP16_OUT(ISP16_DRIVE_SET_PORT, i | drive_type);
-
-	/* enable cdrom on interface with 82C929 chip */
-	if (isp16_type > 1)
-		ISP16_OUT(isp16_enable_port, ISP16_ENABLE_CDROM);
-
-	/* set base address, irq and dma */
-	i = ISP16_IN(ISP16_IO_SET_PORT) & ISP16_IO_SET_MASK;	/* keep some bits */
-	ISP16_OUT(ISP16_IO_SET_PORT, i | base_code | irq_code | dma_code);
-
-	return 0;
-}
-
-static void __exit isp16_exit(void)
-{
-	release_region(ISP16_IO_BASE, ISP16_IO_SIZE);
-	printk(KERN_INFO "ISP16: module released.\n");
-}
-
-module_init(isp16_init);
-module_exit(isp16_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/cdrom/isp16.h b/drivers/cdrom/isp16.h
deleted file mode 100644
index 5bd22c8f7a96..000000000000
--- a/drivers/cdrom/isp16.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* -- isp16.h
- *
- *  Header for detection and initialisation of cdrom interface (only) on
- *  ISP16 (MAD16, Mozart) sound card.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* These are the default values */
-#define ISP16_CDROM_TYPE "Sanyo"
-#define ISP16_CDROM_IO_BASE 0x340
-#define ISP16_CDROM_IRQ 0
-#define ISP16_CDROM_DMA 0
-
-/* Some (Media)Magic */
-/* define types of drive the interface on an ISP16 card may be looking at */
-#define ISP16_DRIVE_X 0x00
-#define ISP16_SONY  0x02
-#define ISP16_PANASONIC0 0x02
-#define ISP16_SANYO0 0x02
-#define ISP16_MITSUMI  0x04
-#define ISP16_PANASONIC1 0x06
-#define ISP16_SANYO1 0x06
-#define ISP16_DRIVE_NOT_USED 0x08  /* not used */
-#define ISP16_DRIVE_SET_MASK 0xF1  /* don't change 0-bit or 4-7-bits*/
-/* ...for port */
-#define ISP16_DRIVE_SET_PORT 0xF8D
-/* set io parameters */
-#define ISP16_BASE_340  0x00
-#define ISP16_BASE_330  0x40
-#define ISP16_BASE_360  0x80
-#define ISP16_BASE_320  0xC0
-#define ISP16_IRQ_X  0x00
-#define ISP16_IRQ_5  0x04  /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_7  0x08  /* shouldn't be used to avoid sound card conflicts */
-#define ISP16_IRQ_3  0x0C
-#define ISP16_IRQ_9  0x10
-#define ISP16_IRQ_10  0x14
-#define ISP16_IRQ_11  0x18
-#define ISP16_DMA_X  0x03
-#define ISP16_DMA_3  0x00
-#define ISP16_DMA_5  0x00
-#define ISP16_DMA_6  0x01
-#define ISP16_DMA_7  0x02
-#define ISP16_IO_SET_MASK  0x20  /* don't change 5-bit */
-/* ...for port */
-#define ISP16_IO_SET_PORT  0xF8E
-/* enable the card */
-#define ISP16_C928__ENABLE_PORT  0xF90  /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__ENABLE_PORT  0xF91  /* ISP16 with OPTi 82C929 chip */
-#define ISP16_ENABLE_CDROM  0x80  /* seven bit */
-
-/* the magic stuff */
-#define ISP16_CTRL_PORT  0xF8F
-#define ISP16_C928__CTRL  0xE2  /* ISP16 with OPTi 82C928 chip */
-#define ISP16_C929__CTRL  0xE3  /* ISP16 with OPTi 82C929 chip */
-
-#define ISP16_IO_BASE 0xF8D
-#define ISP16_IO_SIZE 5  /* ports used from 0xF8D up to 0xF91 */
diff --git a/drivers/cdrom/mcdx.c b/drivers/cdrom/mcdx.c
deleted file mode 100644
index 4310cc84dfed..000000000000
--- a/drivers/cdrom/mcdx.c
+++ /dev/null
@@ -1,1943 +0,0 @@
-/*
- * The Mitsumi CDROM interface
- * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
- * VERSION: 2.14(hs)
- *
- * ... anyway, I'm back again, thanks to Marcin, he adopted
- * large portions of my code (at least the parts containing
- * my main thoughts ...)
- *
- ****************** H E L P *********************************
- * If you ever plan to update your CD ROM drive and perhaps
- * want to sell or simply give away your Mitsumi FX-001[DS]
- * -- Please --
- * mail me (heiko@lotte.sax.de).  When my last drive goes
- * ballistic no more driver support will be available from me!
- *************************************************************
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Thanks to
- *  The Linux Community at all and ...
- *  Martin Harriss (he wrote the first Mitsumi Driver)
- *  Eberhard Moenkeberg (he gave me much support and the initial kick)
- *  Bernd Huebner, Ruediger Helsch (Unifix-Software GmbH, they
- *      improved the original driver)
- *  Jon Tombs, Bjorn Ekwall (module support)
- *  Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
- *  Gerd Knorr (he lent me his PhotoCD)
- *  Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
- *  Andreas Kies (testing the mysterious hang-ups)
- *  Heiko Eissfeldt (VERIFY_READ/WRITE)
- *  Marcin Dalecki (improved performance, shortened code)
- *  ... somebody forgotten?
- *
- *  9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	               Removed init_module & cleanup_module in favor of 
- *		       module_init & module_exit.
- *		       Torben Mathiasen <tmm@image.dk>
- */
-
-
-#ifdef RCS
-static const char *mcdx_c_version
-    = "$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $";
-#endif
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/current.h>
-#include <asm/uaccess.h>
-
-#include <linux/major.h>
-#define MAJOR_NR MITSUMI_X_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#include "mcdx.h"
-
-#ifndef HZ
-#error HZ not defined
-#endif
-
-#define xwarn(fmt, args...) printk(KERN_WARNING MCDX " " fmt, ## args)
-
-#if !MCDX_QUIET
-#define xinfo(fmt, args...) printk(KERN_INFO MCDX " " fmt, ## args)
-#else
-#define xinfo(fmt, args...) { ; }
-#endif
-
-#if MCDX_DEBUG
-#define xtrace(lvl, fmt, args...) \
-		{ if (lvl > 0) \
-			{ printk(KERN_DEBUG MCDX ":: " fmt, ## args); } }
-#define xdebug(fmt, args...) printk(KERN_DEBUG MCDX ":: " fmt, ## args)
-#else
-#define xtrace(lvl, fmt, args...) { ; }
-#define xdebug(fmt, args...) { ; }
-#endif
-
-/* CONSTANTS *******************************************************/
-
-/* Following are the number of sectors we _request_ from the drive
-   every time an access outside the already requested range is done.
-   The _direct_ size is the number of sectors we're allowed to skip
-   directly (performing a read instead of requesting the new sector
-   needed */
-static const int REQUEST_SIZE = 800;	/* should be less then 255 * 4 */
-static const int DIRECT_SIZE = 400;	/* should be less then REQUEST_SIZE */
-
-enum drivemodes { TOC, DATA, RAW, COOKED };
-enum datamodes { MODE0, MODE1, MODE2 };
-enum resetmodes { SOFT, HARD };
-
-static const int SINGLE = 0x01;		/* single speed drive (FX001S, LU) */
-static const int DOUBLE = 0x02;		/* double speed drive (FX001D, ..? */
-static const int DOOR = 0x04;		/* door locking capability */
-static const int MULTI = 0x08;		/* multi session capability */
-
-static const unsigned char READ1X = 0xc0;
-static const unsigned char READ2X = 0xc1;
-
-
-/* DECLARATIONS ****************************************************/
-struct s_subqcode {
-	unsigned char control;
-	unsigned char tno;
-	unsigned char index;
-	struct cdrom_msf0 tt;
-	struct cdrom_msf0 dt;
-};
-
-struct s_diskinfo {
-	unsigned int n_first;
-	unsigned int n_last;
-	struct cdrom_msf0 msf_leadout;
-	struct cdrom_msf0 msf_first;
-};
-
-struct s_multi {
-	unsigned char multi;
-	struct cdrom_msf0 msf_last;
-};
-
-struct s_version {
-	unsigned char code;
-	unsigned char ver;
-};
-
-/* Per drive/controller stuff **************************************/
-
-struct s_drive_stuff {
-	/* waitqueues */
-	wait_queue_head_t busyq;
-	wait_queue_head_t lockq;
-	wait_queue_head_t sleepq;
-
-	/* flags */
-	volatile int introk;	/* status of last irq operation */
-	volatile int busy;	/* drive performs an operation */
-	volatile int lock;	/* exclusive usage */
-
-	/* cd infos */
-	struct s_diskinfo di;
-	struct s_multi multi;
-	struct s_subqcode *toc;	/* first entry of the toc array */
-	struct s_subqcode start;
-	struct s_subqcode stop;
-	int xa;			/* 1 if xa disk */
-	int audio;		/* 1 if audio disk */
-	int audiostatus;
-
-	/* `buffer' control */
-	volatile int valid;	/* pending, ..., values are valid */
-	volatile int pending;	/* next sector to be read */
-	volatile int low_border;	/* first sector not to be skipped direct */
-	volatile int high_border;	/* first sector `out of area' */
-#ifdef AK2
-	volatile int int_err;
-#endif				/* AK2 */
-
-	/* adds and odds */
-	unsigned wreg_data;	/* w data */
-	unsigned wreg_reset;	/* w hardware reset */
-	unsigned wreg_hcon;	/* w hardware conf */
-	unsigned wreg_chn;	/* w channel */
-	unsigned rreg_data;	/* r data */
-	unsigned rreg_status;	/* r status */
-
-	int irq;		/* irq used by this drive */
-	int present;		/* drive present and its capabilities */
-	unsigned char readcmd;	/* read cmd depends on single/double speed */
-	unsigned char playcmd;	/* play should always be single speed */
-	unsigned int xxx;	/* set if changed, reset while open */
-	unsigned int yyy;	/* set if changed, reset by media_changed */
-	int users;		/* keeps track of open/close */
-	int lastsector;		/* last block accessible */
-	int status;		/* last operation's error / status */
-	int readerrs;		/* # of blocks read w/o error */
-	struct cdrom_device_info info;
-	struct gendisk *disk;
-};
-
-
-/* Prototypes ******************************************************/
-
-/*	The following prototypes are already declared elsewhere.  They are
- 	repeated here to show what's going on.  And to sense, if they're
-	changed elsewhere. */
-
-static int mcdx_init(void);
-
-static int mcdx_block_open(struct inode *inode, struct file *file)
-{
-	struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_open(&p->info, inode, file);
-}
-
-static int mcdx_block_release(struct inode *inode, struct file *file)
-{
-	struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_release(&p->info, file);
-}
-
-static int mcdx_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_ioctl(file, &p->info, inode, cmd, arg);
-}
-
-static int mcdx_block_media_changed(struct gendisk *disk)
-{
-	struct s_drive_stuff *p = disk->private_data;
-	return cdrom_media_changed(&p->info);
-}
-
-static struct block_device_operations mcdx_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= mcdx_block_open,
-	.release	= mcdx_block_release,
-	.ioctl		= mcdx_block_ioctl,
-	.media_changed	= mcdx_block_media_changed,
-};
-
-
-/*	Indirect exported functions. These functions are exported by their
-	addresses, such as mcdx_open and mcdx_close in the
-	structure mcdx_dops. */
-
-/* exported by file_ops */
-static int mcdx_open(struct cdrom_device_info *cdi, int purpose);
-static void mcdx_close(struct cdrom_device_info *cdi);
-static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr);
-static int mcdx_tray_move(struct cdrom_device_info *cdi, int position);
-static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock);
-static int mcdx_audio_ioctl(struct cdrom_device_info *cdi,
-			    unsigned int cmd, void *arg);
-
-/* misc internal support functions */
-static void log2msf(unsigned int, struct cdrom_msf0 *);
-static unsigned int msf2log(const struct cdrom_msf0 *);
-static unsigned int uint2bcd(unsigned int);
-static unsigned int bcd2uint(unsigned char);
-static unsigned port(int *);
-static int irq(int *);
-static void mcdx_delay(struct s_drive_stuff *, long jifs);
-static int mcdx_transfer(struct s_drive_stuff *, char *buf, int sector,
-			 int nr_sectors);
-static int mcdx_xfer(struct s_drive_stuff *, char *buf, int sector,
-		     int nr_sectors);
-
-static int mcdx_config(struct s_drive_stuff *, int);
-static int mcdx_requestversion(struct s_drive_stuff *, struct s_version *,
-			       int);
-static int mcdx_stop(struct s_drive_stuff *, int);
-static int mcdx_hold(struct s_drive_stuff *, int);
-static int mcdx_reset(struct s_drive_stuff *, enum resetmodes, int);
-static int mcdx_setdrivemode(struct s_drive_stuff *, enum drivemodes, int);
-static int mcdx_setdatamode(struct s_drive_stuff *, enum datamodes, int);
-static int mcdx_requestsubqcode(struct s_drive_stuff *,
-				struct s_subqcode *, int);
-static int mcdx_requestmultidiskinfo(struct s_drive_stuff *,
-				     struct s_multi *, int);
-static int mcdx_requesttocdata(struct s_drive_stuff *, struct s_diskinfo *,
-			       int);
-static int mcdx_getstatus(struct s_drive_stuff *, int);
-static int mcdx_getval(struct s_drive_stuff *, int to, int delay, char *);
-static int mcdx_talk(struct s_drive_stuff *,
-		     const unsigned char *cmd, size_t,
-		     void *buffer, size_t size, unsigned int timeout, int);
-static int mcdx_readtoc(struct s_drive_stuff *);
-static int mcdx_playtrk(struct s_drive_stuff *, const struct cdrom_ti *);
-static int mcdx_playmsf(struct s_drive_stuff *, const struct cdrom_msf *);
-static int mcdx_setattentuator(struct s_drive_stuff *,
-			       struct cdrom_volctrl *, int);
-
-/* static variables ************************************************/
-
-static int mcdx_drive_map[][2] = MCDX_DRIVEMAP;
-static struct s_drive_stuff *mcdx_stuffp[MCDX_NDRIVES];
-static DEFINE_SPINLOCK(mcdx_lock);
-static struct request_queue *mcdx_queue;
-
-/* You can only set the first two pairs, from old MODULE_PARM code.  */
-static int mcdx_set(const char *val, struct kernel_param *kp)
-{
-	get_options((char *)val, 4, (int *)mcdx_drive_map);
-	return 0;
-}
-module_param_call(mcdx, mcdx_set, NULL, NULL, 0);
-
-static struct cdrom_device_ops mcdx_dops = {
-	.open		= mcdx_open,
-	.release	= mcdx_close,
-	.media_changed	= mcdx_media_changed,
-	.tray_move	= mcdx_tray_move,
-	.lock_door	= mcdx_lockdoor,
-	.audio_ioctl	= mcdx_audio_ioctl,
-	.capability	= CDC_OPEN_TRAY | CDC_LOCK | CDC_MEDIA_CHANGED |
-			  CDC_PLAY_AUDIO | CDC_DRIVE_STATUS,
-};
-
-/* KERNEL INTERFACE FUNCTIONS **************************************/
-
-
-static int mcdx_audio_ioctl(struct cdrom_device_info *cdi,
-			    unsigned int cmd, void *arg)
-{
-	struct s_drive_stuff *stuffp = cdi->handle;
-
-	if (!stuffp->present)
-		return -ENXIO;
-
-	if (stuffp->xxx) {
-		if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) {
-			stuffp->lastsector = -1;
-		} else {
-			stuffp->lastsector = (CD_FRAMESIZE / 512)
-			    * msf2log(&stuffp->di.msf_leadout) - 1;
-		}
-
-		if (stuffp->toc) {
-			kfree(stuffp->toc);
-			stuffp->toc = NULL;
-			if (-1 == mcdx_readtoc(stuffp))
-				return -1;
-		}
-
-		stuffp->xxx = 0;
-	}
-
-	switch (cmd) {
-	case CDROMSTART:{
-			xtrace(IOCTL, "ioctl() START\n");
-			/* Spin up the drive.  Don't think we can do this.
-			   * For now, ignore it.
-			 */
-			return 0;
-		}
-
-	case CDROMSTOP:{
-			xtrace(IOCTL, "ioctl() STOP\n");
-			stuffp->audiostatus = CDROM_AUDIO_INVALID;
-			if (-1 == mcdx_stop(stuffp, 1))
-				return -EIO;
-			return 0;
-		}
-
-	case CDROMPLAYTRKIND:{
-			struct cdrom_ti *ti = (struct cdrom_ti *) arg;
-
-			xtrace(IOCTL, "ioctl() PLAYTRKIND\n");
-			if ((ti->cdti_trk0 < stuffp->di.n_first)
-			    || (ti->cdti_trk0 > stuffp->di.n_last)
-			    || (ti->cdti_trk1 < stuffp->di.n_first))
-				return -EINVAL;
-			if (ti->cdti_trk1 > stuffp->di.n_last)
-				ti->cdti_trk1 = stuffp->di.n_last;
-			xtrace(PLAYTRK, "ioctl() track %d to %d\n",
-			       ti->cdti_trk0, ti->cdti_trk1);
-			return mcdx_playtrk(stuffp, ti);
-		}
-
-	case CDROMPLAYMSF:{
-			struct cdrom_msf *msf = (struct cdrom_msf *) arg;
-
-			xtrace(IOCTL, "ioctl() PLAYMSF\n");
-
-			if ((stuffp->audiostatus == CDROM_AUDIO_PLAY)
-			    && (-1 == mcdx_hold(stuffp, 1)))
-				return -EIO;
-
-			msf->cdmsf_min0 = uint2bcd(msf->cdmsf_min0);
-			msf->cdmsf_sec0 = uint2bcd(msf->cdmsf_sec0);
-			msf->cdmsf_frame0 = uint2bcd(msf->cdmsf_frame0);
-
-			msf->cdmsf_min1 = uint2bcd(msf->cdmsf_min1);
-			msf->cdmsf_sec1 = uint2bcd(msf->cdmsf_sec1);
-			msf->cdmsf_frame1 = uint2bcd(msf->cdmsf_frame1);
-
-			stuffp->stop.dt.minute = msf->cdmsf_min1;
-			stuffp->stop.dt.second = msf->cdmsf_sec1;
-			stuffp->stop.dt.frame = msf->cdmsf_frame1;
-
-			return mcdx_playmsf(stuffp, msf);
-		}
-
-	case CDROMRESUME:{
-			xtrace(IOCTL, "ioctl() RESUME\n");
-			return mcdx_playtrk(stuffp, NULL);
-		}
-
-	case CDROMREADTOCENTRY:{
-			struct cdrom_tocentry *entry =
-			    (struct cdrom_tocentry *) arg;
-			struct s_subqcode *tp = NULL;
-			xtrace(IOCTL, "ioctl() READTOCENTRY\n");
-
-			if (-1 == mcdx_readtoc(stuffp))
-				return -1;
-			if (entry->cdte_track == CDROM_LEADOUT)
-				tp = &stuffp->toc[stuffp->di.n_last -
-						  stuffp->di.n_first + 1];
-			else if (entry->cdte_track > stuffp->di.n_last
-				 || entry->cdte_track < stuffp->di.n_first)
-				return -EINVAL;
-			else
-				tp = &stuffp->toc[entry->cdte_track -
-						  stuffp->di.n_first];
-
-			if (NULL == tp)
-				return -EIO;
-			entry->cdte_adr = tp->control;
-			entry->cdte_ctrl = tp->control >> 4;
-			/* Always return stuff in MSF, and let the Uniform cdrom driver
-			   worry about what the user actually wants */
-			entry->cdte_addr.msf.minute =
-			    bcd2uint(tp->dt.minute);
-			entry->cdte_addr.msf.second =
-			    bcd2uint(tp->dt.second);
-			entry->cdte_addr.msf.frame =
-			    bcd2uint(tp->dt.frame);
-			return 0;
-		}
-
-	case CDROMSUBCHNL:{
-			struct cdrom_subchnl *sub =
-			    (struct cdrom_subchnl *) arg;
-			struct s_subqcode q;
-
-			xtrace(IOCTL, "ioctl() SUBCHNL\n");
-
-			if (-1 == mcdx_requestsubqcode(stuffp, &q, 2))
-				return -EIO;
-
-			xtrace(SUBCHNL, "audiostatus: %x\n",
-			       stuffp->audiostatus);
-			sub->cdsc_audiostatus = stuffp->audiostatus;
-			sub->cdsc_adr = q.control;
-			sub->cdsc_ctrl = q.control >> 4;
-			sub->cdsc_trk = bcd2uint(q.tno);
-			sub->cdsc_ind = bcd2uint(q.index);
-
-			xtrace(SUBCHNL, "trk %d, ind %d\n",
-			       sub->cdsc_trk, sub->cdsc_ind);
-			/* Always return stuff in MSF, and let the Uniform cdrom driver
-			   worry about what the user actually wants */
-			sub->cdsc_absaddr.msf.minute =
-			    bcd2uint(q.dt.minute);
-			sub->cdsc_absaddr.msf.second =
-			    bcd2uint(q.dt.second);
-			sub->cdsc_absaddr.msf.frame = bcd2uint(q.dt.frame);
-			sub->cdsc_reladdr.msf.minute =
-			    bcd2uint(q.tt.minute);
-			sub->cdsc_reladdr.msf.second =
-			    bcd2uint(q.tt.second);
-			sub->cdsc_reladdr.msf.frame = bcd2uint(q.tt.frame);
-			xtrace(SUBCHNL,
-			       "msf: abs %02d:%02d:%02d, rel %02d:%02d:%02d\n",
-			       sub->cdsc_absaddr.msf.minute,
-			       sub->cdsc_absaddr.msf.second,
-			       sub->cdsc_absaddr.msf.frame,
-			       sub->cdsc_reladdr.msf.minute,
-			       sub->cdsc_reladdr.msf.second,
-			       sub->cdsc_reladdr.msf.frame);
-
-			return 0;
-		}
-
-	case CDROMREADTOCHDR:{
-			struct cdrom_tochdr *toc =
-			    (struct cdrom_tochdr *) arg;
-
-			xtrace(IOCTL, "ioctl() READTOCHDR\n");
-			toc->cdth_trk0 = stuffp->di.n_first;
-			toc->cdth_trk1 = stuffp->di.n_last;
-			xtrace(TOCHDR,
-			       "ioctl() track0 = %d, track1 = %d\n",
-			       stuffp->di.n_first, stuffp->di.n_last);
-			return 0;
-		}
-
-	case CDROMPAUSE:{
-			xtrace(IOCTL, "ioctl() PAUSE\n");
-			if (stuffp->audiostatus != CDROM_AUDIO_PLAY)
-				return -EINVAL;
-			if (-1 == mcdx_stop(stuffp, 1))
-				return -EIO;
-			stuffp->audiostatus = CDROM_AUDIO_PAUSED;
-			if (-1 ==
-			    mcdx_requestsubqcode(stuffp, &stuffp->start,
-						 1))
-				return -EIO;
-			return 0;
-		}
-
-	case CDROMMULTISESSION:{
-			struct cdrom_multisession *ms =
-			    (struct cdrom_multisession *) arg;
-			xtrace(IOCTL, "ioctl() MULTISESSION\n");
-			/* Always return stuff in LBA, and let the Uniform cdrom driver
-			   worry about what the user actually wants */
-			ms->addr.lba = msf2log(&stuffp->multi.msf_last);
-			ms->xa_flag = !!stuffp->multi.multi;
-			xtrace(MS,
-			       "ioctl() (%d, 0x%08x [%02x:%02x.%02x])\n",
-			       ms->xa_flag, ms->addr.lba,
-			       stuffp->multi.msf_last.minute,
-			       stuffp->multi.msf_last.second,
-			       stuffp->multi.msf_last.frame);
-
-			return 0;
-		}
-
-	case CDROMEJECT:{
-			xtrace(IOCTL, "ioctl() EJECT\n");
-			if (stuffp->users > 1)
-				return -EBUSY;
-			return (mcdx_tray_move(cdi, 1));
-		}
-
-	case CDROMCLOSETRAY:{
-			xtrace(IOCTL, "ioctl() CDROMCLOSETRAY\n");
-			return (mcdx_tray_move(cdi, 0));
-		}
-
-	case CDROMVOLCTRL:{
-			struct cdrom_volctrl *volctrl =
-			    (struct cdrom_volctrl *) arg;
-			xtrace(IOCTL, "ioctl() VOLCTRL\n");
-
-#if 0				/* not tested! */
-			/* adjust for the weirdness of workman (md) */
-			/* can't test it (hs) */
-			volctrl.channel2 = volctrl.channel1;
-			volctrl.channel1 = volctrl.channel3 = 0x00;
-#endif
-			return mcdx_setattentuator(stuffp, volctrl, 2);
-		}
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static void do_mcdx_request(request_queue_t * q)
-{
-	struct s_drive_stuff *stuffp;
-	struct request *req;
-
-      again:
-
-	req = elv_next_request(q);
-	if (!req)
-		return;
-
-	stuffp = req->rq_disk->private_data;
-
-	if (!stuffp->present) {
-		xwarn("do_request(): bad device: %s\n",req->rq_disk->disk_name);
-		xtrace(REQUEST, "end_request(0): bad device\n");
-		end_request(req, 0);
-		return;
-	}
-
-	if (stuffp->audio) {
-		xwarn("do_request() attempt to read from audio cd\n");
-		xtrace(REQUEST, "end_request(0): read from audio\n");
-		end_request(req, 0);
-		return;
-	}
-
-	xtrace(REQUEST, "do_request() (%lu + %lu)\n",
-	       req->sector, req->nr_sectors);
-
-	if (req->cmd != READ) {
-		xwarn("do_request(): non-read command to cd!!\n");
-		xtrace(REQUEST, "end_request(0): write\n");
-		end_request(req, 0);
-		return;
-	}
-	else {
-		stuffp->status = 0;
-		while (req->nr_sectors) {
-			int i;
-
-			i = mcdx_transfer(stuffp,
-					  req->buffer,
-					  req->sector,
-					  req->nr_sectors);
-
-			if (i == -1) {
-				end_request(req, 0);
-				goto again;
-			}
-			req->sector += i;
-			req->nr_sectors -= i;
-			req->buffer += (i * 512);
-		}
-		end_request(req, 1);
-		goto again;
-
-		xtrace(REQUEST, "end_request(1)\n");
-		end_request(req, 1);
-	}
-
-	goto again;
-}
-
-static int mcdx_open(struct cdrom_device_info *cdi, int purpose)
-{
-	struct s_drive_stuff *stuffp;
-	xtrace(OPENCLOSE, "open()\n");
-	stuffp = cdi->handle;
-	if (!stuffp->present)
-		return -ENXIO;
-
-	/* Make the modules looking used ... (thanx bjorn).
-	 * But we shouldn't forget to decrement the module counter
-	 * on error return */
-
-	/* this is only done to test if the drive talks with us */
-	if (-1 == mcdx_getstatus(stuffp, 1))
-		return -EIO;
-
-	if (stuffp->xxx) {
-
-		xtrace(OPENCLOSE, "open() media changed\n");
-		stuffp->audiostatus = CDROM_AUDIO_INVALID;
-		stuffp->readcmd = 0;
-		xtrace(OPENCLOSE, "open() Request multisession info\n");
-		if (-1 ==
-		    mcdx_requestmultidiskinfo(stuffp, &stuffp->multi, 6))
-			xinfo("No multidiskinfo\n");
-	} else {
-		/* multisession ? */
-		if (!stuffp->multi.multi)
-			stuffp->multi.msf_last.second = 2;
-
-		xtrace(OPENCLOSE, "open() MS: %d, last @ %02x:%02x.%02x\n",
-		       stuffp->multi.multi,
-		       stuffp->multi.msf_last.minute,
-		       stuffp->multi.msf_last.second,
-		       stuffp->multi.msf_last.frame);
-
-		{;
-		}		/* got multisession information */
-		/* request the disks table of contents (aka diskinfo) */
-		if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) {
-
-			stuffp->lastsector = -1;
-
-		} else {
-
-			stuffp->lastsector = (CD_FRAMESIZE / 512)
-			    * msf2log(&stuffp->di.msf_leadout) - 1;
-
-			xtrace(OPENCLOSE,
-			       "open() start %d (%02x:%02x.%02x) %d\n",
-			       stuffp->di.n_first,
-			       stuffp->di.msf_first.minute,
-			       stuffp->di.msf_first.second,
-			       stuffp->di.msf_first.frame,
-			       msf2log(&stuffp->di.msf_first));
-			xtrace(OPENCLOSE,
-			       "open() last %d (%02x:%02x.%02x) %d\n",
-			       stuffp->di.n_last,
-			       stuffp->di.msf_leadout.minute,
-			       stuffp->di.msf_leadout.second,
-			       stuffp->di.msf_leadout.frame,
-			       msf2log(&stuffp->di.msf_leadout));
-		}
-
-		if (stuffp->toc) {
-			xtrace(MALLOC, "open() free old toc @ %p\n",
-			       stuffp->toc);
-			kfree(stuffp->toc);
-
-			stuffp->toc = NULL;
-		}
-
-		xtrace(OPENCLOSE, "open() init irq generation\n");
-		if (-1 == mcdx_config(stuffp, 1))
-			return -EIO;
-#ifdef FALLBACK
-		/* Set the read speed */
-		xwarn("AAA %x AAA\n", stuffp->readcmd);
-		if (stuffp->readerrs)
-			stuffp->readcmd = READ1X;
-		else
-			stuffp->readcmd =
-			    stuffp->present | SINGLE ? READ1X : READ2X;
-		xwarn("XXX %x XXX\n", stuffp->readcmd);
-#else
-		stuffp->readcmd =
-		    stuffp->present | SINGLE ? READ1X : READ2X;
-#endif
-
-		/* try to get the first sector, iff any ... */
-		if (stuffp->lastsector >= 0) {
-			char buf[512];
-			int ans;
-			int tries;
-
-			stuffp->xa = 0;
-			stuffp->audio = 0;
-
-			for (tries = 6; tries; tries--) {
-
-				stuffp->introk = 1;
-
-				xtrace(OPENCLOSE, "open() try as %s\n",
-				       stuffp->xa ? "XA" : "normal");
-				/* set data mode */
-				if (-1 == (ans = mcdx_setdatamode(stuffp,
-								  stuffp->
-								  xa ?
-								  MODE2 :
-								  MODE1,
-								  1))) {
-					/* return -EIO; */
-					stuffp->xa = 0;
-					break;
-				}
-
-				if ((stuffp->audio = e_audio(ans)))
-					break;
-
-				while (0 ==
-				       (ans =
-					mcdx_transfer(stuffp, buf, 0, 1)));
-
-				if (ans == 1)
-					break;
-				stuffp->xa = !stuffp->xa;
-			}
-		}
-		/* xa disks will be read in raw mode, others not */
-		if (-1 == mcdx_setdrivemode(stuffp,
-					    stuffp->xa ? RAW : COOKED,
-					    1))
-			return -EIO;
-		if (stuffp->audio) {
-			xinfo("open() audio disk found\n");
-		} else if (stuffp->lastsector >= 0) {
-			xinfo("open() %s%s disk found\n",
-			      stuffp->xa ? "XA / " : "",
-			      stuffp->multi.
-			      multi ? "Multi Session" : "Single Session");
-		}
-	}
-	stuffp->xxx = 0;
-	stuffp->users++;
-	return 0;
-}
-
-static void mcdx_close(struct cdrom_device_info *cdi)
-{
-	struct s_drive_stuff *stuffp;
-
-	xtrace(OPENCLOSE, "close()\n");
-
-	stuffp = cdi->handle;
-
-	--stuffp->users;
-}
-
-static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-/*	Return: 1 if media changed since last call to this function
-			0 otherwise */
-{
-	struct s_drive_stuff *stuffp;
-
-	xinfo("mcdx_media_changed called for device %s\n", cdi->name);
-
-	stuffp = cdi->handle;
-	mcdx_getstatus(stuffp, 1);
-
-	if (stuffp->yyy == 0)
-		return 0;
-
-	stuffp->yyy = 0;
-	return 1;
-}
-
-#ifndef MODULE
-static int __init mcdx_setup(char *str)
-{
-	int pi[4];
-	(void) get_options(str, ARRAY_SIZE(pi), pi);
-
-	if (pi[0] > 0)
-		mcdx_drive_map[0][0] = pi[1];
-	if (pi[0] > 1)
-		mcdx_drive_map[0][1] = pi[2];
-	return 1;
-}
-
-__setup("mcdx=", mcdx_setup);
-
-#endif
-
-/* DIRTY PART ******************************************************/
-
-static void mcdx_delay(struct s_drive_stuff *stuff, long jifs)
-/* This routine is used for sleeping.
- * A jifs value <0 means NO sleeping,
- *              =0 means minimal sleeping (let the kernel
- *                 run for other processes)
- *              >0 means at least sleep for that amount.
- *	May be we could use a simple count loop w/ jumps to itself, but
- *	I wanna make this independent of cpu speed. [1 jiffy is 1/HZ] sec */
-{
-	if (jifs < 0)
-		return;
-
-	xtrace(SLEEP, "*** delay: sleepq\n");
-	interruptible_sleep_on_timeout(&stuff->sleepq, jifs);
-	xtrace(SLEEP, "delay awoken\n");
-	if (signal_pending(current)) {
-		xtrace(SLEEP, "got signal\n");
-	}
-}
-
-static irqreturn_t mcdx_intr(int irq, void *dev_id)
-{
-	struct s_drive_stuff *stuffp = dev_id;
-	unsigned char b;
-
-#ifdef AK2
-	if (!stuffp->busy && stuffp->pending)
-		stuffp->int_err = 1;
-
-#endif				/* AK2 */
-	/* get the interrupt status */
-	b = inb(stuffp->rreg_status);
-	stuffp->introk = ~b & MCDX_RBIT_DTEN;
-
-	/* NOTE: We only should get interrupts if the data we
-	 * requested are ready to transfer.
-	 * But the drive seems to generate ``asynchronous'' interrupts
-	 * on several error conditions too.  (Despite the err int enable
-	 * setting during initialisation) */
-
-	/* if not ok, read the next byte as the drives status */
-	if (!stuffp->introk) {
-		xtrace(IRQ, "intr() irq %d hw status 0x%02x\n", irq, b);
-		if (~b & MCDX_RBIT_STEN) {
-			xinfo("intr() irq %d    status 0x%02x\n",
-			      irq, inb(stuffp->rreg_data));
-		} else {
-			xinfo("intr() irq %d ambiguous hw status\n", irq);
-		}
-	} else {
-		xtrace(IRQ, "irq() irq %d ok, status %02x\n", irq, b);
-	}
-
-	stuffp->busy = 0;
-	wake_up_interruptible(&stuffp->busyq);
-	return IRQ_HANDLED;
-}
-
-
-static int mcdx_talk(struct s_drive_stuff *stuffp,
-	  const unsigned char *cmd, size_t cmdlen,
-	  void *buffer, size_t size, unsigned int timeout, int tries)
-/* Send a command to the drive, wait for the result.
- * returns -1 on timeout, drive status otherwise
- * If buffer is not zero, the result (length size) is stored there.
- * If buffer is zero the size should be the number of bytes to read
- * from the drive.  These bytes are discarded.
- */
-{
-	int st;
-	char c;
-	int discard;
-
-	/* Somebody wants the data read? */
-	if ((discard = (buffer == NULL)))
-		buffer = &c;
-
-	while (stuffp->lock) {
-		xtrace(SLEEP, "*** talk: lockq\n");
-		interruptible_sleep_on(&stuffp->lockq);
-		xtrace(SLEEP, "talk: awoken\n");
-	}
-
-	stuffp->lock = 1;
-
-	/* An operation other then reading data destroys the
-	   * data already requested and remembered in stuffp->request, ... */
-	stuffp->valid = 0;
-
-#if MCDX_DEBUG & TALK
-	{
-		unsigned char i;
-		xtrace(TALK,
-		       "talk() %d / %d tries, res.size %d, command 0x%02x",
-		       tries, timeout, size, (unsigned char) cmd[0]);
-		for (i = 1; i < cmdlen; i++)
-			xtrace(TALK, " 0x%02x", cmd[i]);
-		xtrace(TALK, "\n");
-	}
-#endif
-
-	/*  give up if all tries are done (bad) or if the status
-	 *  st != -1 (good) */
-	for (st = -1; st == -1 && tries; tries--) {
-
-		char *bp = (char *) buffer;
-		size_t sz = size;
-
-		outsb(stuffp->wreg_data, cmd, cmdlen);
-		xtrace(TALK, "talk() command sent\n");
-
-		/* get the status byte */
-		if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) {
-			xinfo("talk() %02x timed out (status), %d tr%s left\n",
-			     cmd[0], tries - 1, tries == 2 ? "y" : "ies");
-			continue;
-		}
-		st = *bp;
-		sz--;
-		if (!discard)
-			bp++;
-
-		xtrace(TALK, "talk() got status 0x%02x\n", st);
-
-		/* command error? */
-		if (e_cmderr(st)) {
-			xwarn("command error cmd = %02x %s \n",
-			      cmd[0], cmdlen > 1 ? "..." : "");
-			st = -1;
-			continue;
-		}
-
-		/* audio status? */
-		if (stuffp->audiostatus == CDROM_AUDIO_INVALID)
-			stuffp->audiostatus =
-			    e_audiobusy(st) ? CDROM_AUDIO_PLAY :
-			    CDROM_AUDIO_NO_STATUS;
-		else if (stuffp->audiostatus == CDROM_AUDIO_PLAY
-			 && e_audiobusy(st) == 0)
-			stuffp->audiostatus = CDROM_AUDIO_COMPLETED;
-
-		/* media change? */
-		if (e_changed(st)) {
-			xinfo("talk() media changed\n");
-			stuffp->xxx = stuffp->yyy = 1;
-		}
-
-		/* now actually get the data */
-		while (sz--) {
-			if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) {
-				xinfo("talk() %02x timed out (data), %d tr%s left\n",
-				     cmd[0], tries - 1,
-				     tries == 2 ? "y" : "ies");
-				st = -1;
-				break;
-			}
-			if (!discard)
-				bp++;
-			xtrace(TALK, "talk() got 0x%02x\n", *(bp - 1));
-		}
-	}
-
-#if !MCDX_QUIET
-	if (!tries && st == -1)
-		xinfo("talk() giving up\n");
-#endif
-
-	stuffp->lock = 0;
-	wake_up_interruptible(&stuffp->lockq);
-
-	xtrace(TALK, "talk() done with 0x%02x\n", st);
-	return st;
-}
-
-/* MODULE STUFF ***********************************************************/
-
-static int __init __mcdx_init(void)
-{
-	int i;
-	int drives = 0;
-
-	mcdx_init();
-	for (i = 0; i < MCDX_NDRIVES; i++) {
-		if (mcdx_stuffp[i]) {
-			xtrace(INIT, "init_module() drive %d stuff @ %p\n",
-			       i, mcdx_stuffp[i]);
-			drives++;
-		}
-	}
-
-	if (!drives)
-		return -EIO;
-
-	return 0;
-}
-
-static void __exit mcdx_exit(void)
-{
-	int i;
-
-	xinfo("cleanup_module called\n");
-
-	for (i = 0; i < MCDX_NDRIVES; i++) {
-		struct s_drive_stuff *stuffp = mcdx_stuffp[i];
-		if (!stuffp)
-			continue;
-		del_gendisk(stuffp->disk);
-		if (unregister_cdrom(&stuffp->info)) {
-			printk(KERN_WARNING "Can't unregister cdrom mcdx\n");
-			continue;
-		}
-		put_disk(stuffp->disk);
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		free_irq(stuffp->irq, NULL);
-		if (stuffp->toc) {
-			xtrace(MALLOC, "cleanup_module() free toc @ %p\n",
-			       stuffp->toc);
-			kfree(stuffp->toc);
-		}
-		xtrace(MALLOC, "cleanup_module() free stuffp @ %p\n",
-		       stuffp);
-		mcdx_stuffp[i] = NULL;
-		kfree(stuffp);
-	}
-
-	if (unregister_blkdev(MAJOR_NR, "mcdx") != 0) {
-		xwarn("cleanup() unregister_blkdev() failed\n");
-	}
-#if !MCDX_QUIET
-	else
-	xinfo("cleanup() succeeded\n");
-#endif
-	blk_cleanup_queue(mcdx_queue);
-}
-
-#ifdef MODULE
-module_init(__mcdx_init);
-#endif
-module_exit(mcdx_exit);
-
-
-/* Support functions ************************************************/
-
-static int __init mcdx_init_drive(int drive)
-{
-	struct s_version version;
-	struct gendisk *disk;
-	struct s_drive_stuff *stuffp;
-	int size = sizeof(*stuffp);
-	char msg[80];
-
-	xtrace(INIT, "init() try drive %d\n", drive);
-
-	xtrace(INIT, "kmalloc space for stuffpt's\n");
-	xtrace(MALLOC, "init() malloc %d bytes\n", size);
-	if (!(stuffp = kzalloc(size, GFP_KERNEL))) {
-		xwarn("init() malloc failed\n");
-		return 1;
-	}
-
-	disk = alloc_disk(1);
-	if (!disk) {
-		xwarn("init() malloc failed\n");
-		kfree(stuffp);
-		return 1;
-	}
-
-	xtrace(INIT, "init() got %d bytes for drive stuff @ %p\n",
-	       sizeof(*stuffp), stuffp);
-
-	/* set default values */
-	stuffp->present = 0;	/* this should be 0 already */
-	stuffp->toc = NULL;	/* this should be NULL already */
-
-	/* setup our irq and i/o addresses */
-	stuffp->irq = irq(mcdx_drive_map[drive]);
-	stuffp->wreg_data = stuffp->rreg_data = port(mcdx_drive_map[drive]);
-	stuffp->wreg_reset = stuffp->rreg_status = stuffp->wreg_data + 1;
-	stuffp->wreg_hcon = stuffp->wreg_reset + 1;
-	stuffp->wreg_chn = stuffp->wreg_hcon + 1;
-
-	init_waitqueue_head(&stuffp->busyq);
-	init_waitqueue_head(&stuffp->lockq);
-	init_waitqueue_head(&stuffp->sleepq);
-
-	/* check if i/o addresses are available */
-	if (!request_region(stuffp->wreg_data, MCDX_IO_SIZE, "mcdx")) {
-		xwarn("0x%03x,%d: Init failed. "
-		      "I/O ports (0x%03x..0x%03x) already in use.\n",
-		      stuffp->wreg_data, stuffp->irq,
-		      stuffp->wreg_data,
-		      stuffp->wreg_data + MCDX_IO_SIZE - 1);
-		xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp);
-		kfree(stuffp);
-		put_disk(disk);
-		xtrace(INIT, "init() continue at next drive\n");
-		return 0;	/* next drive */
-	}
-
-	xtrace(INIT, "init() i/o port is available at 0x%03x\n"
-	       stuffp->wreg_data);
-	xtrace(INIT, "init() hardware reset\n");
-	mcdx_reset(stuffp, HARD, 1);
-
-	xtrace(INIT, "init() get version\n");
-	if (-1 == mcdx_requestversion(stuffp, &version, 4)) {
-		/* failed, next drive */
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		xwarn("%s=0x%03x,%d: Init failed. Can't get version.\n",
-		      MCDX, stuffp->wreg_data, stuffp->irq);
-		xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp);
-		kfree(stuffp);
-		put_disk(disk);
-		xtrace(INIT, "init() continue at next drive\n");
-		return 0;
-	}
-
-	switch (version.code) {
-	case 'D':
-		stuffp->readcmd = READ2X;
-		stuffp->present = DOUBLE | DOOR | MULTI;
-		break;
-	case 'F':
-		stuffp->readcmd = READ1X;
-		stuffp->present = SINGLE | DOOR | MULTI;
-		break;
-	case 'M':
-		stuffp->readcmd = READ1X;
-		stuffp->present = SINGLE;
-		break;
-	default:
-		stuffp->present = 0;
-		break;
-	}
-
-	stuffp->playcmd = READ1X;
-
-	if (!stuffp->present) {
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		xwarn("%s=0x%03x,%d: Init failed. No Mitsumi CD-ROM?.\n",
-		      MCDX, stuffp->wreg_data, stuffp->irq);
-		kfree(stuffp);
-		put_disk(disk);
-		return 0;	/* next drive */
-	}
-
-	xtrace(INIT, "init() register blkdev\n");
-	if (register_blkdev(MAJOR_NR, "mcdx")) {
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		kfree(stuffp);
-		put_disk(disk);
-		return 1;
-	}
-
-	mcdx_queue = blk_init_queue(do_mcdx_request, &mcdx_lock);
-	if (!mcdx_queue) {
-		unregister_blkdev(MAJOR_NR, "mcdx");
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		kfree(stuffp);
-		put_disk(disk);
-		return 1;
-	}
-
-	xtrace(INIT, "init() subscribe irq and i/o\n");
-	if (request_irq(stuffp->irq, mcdx_intr, IRQF_DISABLED, "mcdx", stuffp)) {
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		xwarn("%s=0x%03x,%d: Init failed. Can't get irq (%d).\n",
-		      MCDX, stuffp->wreg_data, stuffp->irq, stuffp->irq);
-		stuffp->irq = 0;
-		blk_cleanup_queue(mcdx_queue);
-		kfree(stuffp);
-		put_disk(disk);
-		return 0;
-	}
-
-	xtrace(INIT, "init() get garbage\n");
-	{
-		int i;
-		mcdx_delay(stuffp, HZ / 2);
-		for (i = 100; i; i--)
-			(void) inb(stuffp->rreg_status);
-	}
-
-
-#ifdef WE_KNOW_WHY
-	/* irq 11 -> channel register */
-	outb(0x50, stuffp->wreg_chn);
-#endif
-
-	xtrace(INIT, "init() set non dma but irq mode\n");
-	mcdx_config(stuffp, 1);
-
-	stuffp->info.ops = &mcdx_dops;
-	stuffp->info.speed = 2;
-	stuffp->info.capacity = 1;
-	stuffp->info.handle = stuffp;
-	sprintf(stuffp->info.name, "mcdx%d", drive);
-	disk->major = MAJOR_NR;
-	disk->first_minor = drive;
-	strcpy(disk->disk_name, stuffp->info.name);
-	disk->fops = &mcdx_bdops;
-	disk->flags = GENHD_FL_CD;
-	stuffp->disk = disk;
-
-	sprintf(msg, " mcdx: Mitsumi CD-ROM installed at 0x%03x, irq %d."
-		" (Firmware version %c %x)\n",
-		stuffp->wreg_data, stuffp->irq, version.code, version.ver);
-	mcdx_stuffp[drive] = stuffp;
-	xtrace(INIT, "init() mcdx_stuffp[%d] = %p\n", drive, stuffp);
-	if (register_cdrom(&stuffp->info) != 0) {
-		printk("Cannot register Mitsumi CD-ROM!\n");
-		free_irq(stuffp->irq, NULL);
-		release_region(stuffp->wreg_data, MCDX_IO_SIZE);
-		kfree(stuffp);
-		put_disk(disk);
-		if (unregister_blkdev(MAJOR_NR, "mcdx") != 0)
-			xwarn("cleanup() unregister_blkdev() failed\n");
-		blk_cleanup_queue(mcdx_queue);
-		return 2;
-	}
-	disk->private_data = stuffp;
-	disk->queue = mcdx_queue;
-	add_disk(disk);
-	printk(msg);
-	return 0;
-}
-
-static int __init mcdx_init(void)
-{
-	int drive;
-	xwarn("Version 2.14(hs) \n");
-
-	xwarn("$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $\n");
-
-	/* zero the pointer array */
-	for (drive = 0; drive < MCDX_NDRIVES; drive++)
-		mcdx_stuffp[drive] = NULL;
-
-	/* do the initialisation */
-	for (drive = 0; drive < MCDX_NDRIVES; drive++) {
-		switch (mcdx_init_drive(drive)) {
-		case 2:
-			return -EIO;
-		case 1:
-			break;
-		}
-	}
-	return 0;
-}
-
-static int mcdx_transfer(struct s_drive_stuff *stuffp,
-	      char *p, int sector, int nr_sectors)
-/*	This seems to do the actually transfer.  But it does more.  It
-	keeps track of errors occurred and will (if possible) fall back
-	to single speed on error.
-	Return:	-1 on timeout or other error
-			else status byte (as in stuff->st) */
-{
-	int ans;
-
-	ans = mcdx_xfer(stuffp, p, sector, nr_sectors);
-	return ans;
-#ifdef FALLBACK
-	if (-1 == ans)
-		stuffp->readerrs++;
-	else
-		return ans;
-
-	if (stuffp->readerrs && stuffp->readcmd == READ1X) {
-		xwarn("XXX Already reading 1x -- no chance\n");
-		return -1;
-	}
-
-	xwarn("XXX Fallback to 1x\n");
-
-	stuffp->readcmd = READ1X;
-	return mcdx_transfer(stuffp, p, sector, nr_sectors);
-#endif
-
-}
-
-
-static int mcdx_xfer(struct s_drive_stuff *stuffp,
-		     char *p, int sector, int nr_sectors)
-/*	This does actually the transfer from the drive.
-	Return:	-1 on timeout or other error
-			else status byte (as in stuff->st) */
-{
-	int border;
-	int done = 0;
-	long timeout;
-
-	if (stuffp->audio) {
-		xwarn("Attempt to read from audio CD.\n");
-		return -1;
-	}
-
-	if (!stuffp->readcmd) {
-		xinfo("Can't transfer from missing disk.\n");
-		return -1;
-	}
-
-	while (stuffp->lock) {
-		interruptible_sleep_on(&stuffp->lockq);
-	}
-
-	if (stuffp->valid && (sector >= stuffp->pending)
-	    && (sector < stuffp->low_border)) {
-
-		/* All (or at least a part of the sectors requested) seems
-		   * to be already requested, so we don't need to bother the
-		   * drive with new requests ...
-		   * Wait for the drive become idle, but first
-		   * check for possible occurred errors --- the drive
-		   * seems to report them asynchronously */
-
-
-		border = stuffp->high_border < (border =
-						sector + nr_sectors)
-		    ? stuffp->high_border : border;
-
-		stuffp->lock = current->pid;
-
-		do {
-
-			while (stuffp->busy) {
-
-				timeout =
-				    interruptible_sleep_on_timeout
-				    (&stuffp->busyq, 5 * HZ);
-
-				if (!stuffp->introk) {
-					xtrace(XFER,
-					       "error via interrupt\n");
-				} else if (!timeout) {
-					xtrace(XFER, "timeout\n");
-				} else if (signal_pending(current)) {
-					xtrace(XFER, "signal\n");
-				} else
-					continue;
-
-				stuffp->lock = 0;
-				stuffp->busy = 0;
-				stuffp->valid = 0;
-
-				wake_up_interruptible(&stuffp->lockq);
-				xtrace(XFER, "transfer() done (-1)\n");
-				return -1;
-			}
-
-			/* check if we need to set the busy flag (as we
-			 * expect an interrupt */
-			stuffp->busy = (3 == (stuffp->pending & 3));
-
-			/* Test if it's the first sector of a block,
-			 * there we have to skip some bytes as we read raw data */
-			if (stuffp->xa && (0 == (stuffp->pending & 3))) {
-				const int HEAD =
-				    CD_FRAMESIZE_RAW - CD_XA_TAIL -
-				    CD_FRAMESIZE;
-				insb(stuffp->rreg_data, p, HEAD);
-			}
-
-			/* now actually read the data */
-			insb(stuffp->rreg_data, p, 512);
-
-			/* test if it's the last sector of a block,
-			 * if so, we have to handle XA special */
-			if ((3 == (stuffp->pending & 3)) && stuffp->xa) {
-				char dummy[CD_XA_TAIL];
-				insb(stuffp->rreg_data, &dummy[0], CD_XA_TAIL);
-			}
-
-			if (stuffp->pending == sector) {
-				p += 512;
-				done++;
-				sector++;
-			}
-		} while (++(stuffp->pending) < border);
-
-		stuffp->lock = 0;
-		wake_up_interruptible(&stuffp->lockq);
-
-	} else {
-
-		/* The requested sector(s) is/are out of the
-		 * already requested range, so we have to bother the drive
-		 * with a new request. */
-
-		static unsigned char cmd[] = {
-			0,
-			0, 0, 0,
-			0, 0, 0
-		};
-
-		cmd[0] = stuffp->readcmd;
-
-		/* The numbers held in ->pending, ..., should be valid */
-		stuffp->valid = 1;
-		stuffp->pending = sector & ~3;
-
-		/* do some sanity checks */
-		if (stuffp->pending > stuffp->lastsector) {
-			xwarn
-			    ("transfer() sector %d from nirvana requested.\n",
-			     stuffp->pending);
-			stuffp->status = MCDX_ST_EOM;
-			stuffp->valid = 0;
-			xtrace(XFER, "transfer() done (-1)\n");
-			return -1;
-		}
-
-		if ((stuffp->low_border = stuffp->pending + DIRECT_SIZE)
-		    > stuffp->lastsector + 1) {
-			xtrace(XFER, "cut low_border\n");
-			stuffp->low_border = stuffp->lastsector + 1;
-		}
-		if ((stuffp->high_border = stuffp->pending + REQUEST_SIZE)
-		    > stuffp->lastsector + 1) {
-			xtrace(XFER, "cut high_border\n");
-			stuffp->high_border = stuffp->lastsector + 1;
-		}
-
-		{		/* Convert the sector to be requested to MSF format */
-			struct cdrom_msf0 pending;
-			log2msf(stuffp->pending / 4, &pending);
-			cmd[1] = pending.minute;
-			cmd[2] = pending.second;
-			cmd[3] = pending.frame;
-		}
-
-		cmd[6] =
-		    (unsigned
-		     char) ((stuffp->high_border - stuffp->pending) / 4);
-		xtrace(XFER, "[%2d]\n", cmd[6]);
-
-		stuffp->busy = 1;
-		/* Now really issue the request command */
-		outsb(stuffp->wreg_data, cmd, sizeof cmd);
-
-	}
-#ifdef AK2
-	if (stuffp->int_err) {
-		stuffp->valid = 0;
-		stuffp->int_err = 0;
-		return -1;
-	}
-#endif				/* AK2 */
-
-	stuffp->low_border = (stuffp->low_border +=
-			      done) <
-	    stuffp->high_border ? stuffp->low_border : stuffp->high_border;
-
-	return done;
-}
-
-
-/*	Access to elements of the mcdx_drive_map members */
-
-static unsigned port(int *ip)
-{
-	return ip[0];
-}
-static int irq(int *ip)
-{
-	return ip[1];
-}
-
-/*	Misc number converters */
-
-static unsigned int bcd2uint(unsigned char c)
-{
-	return (c >> 4) * 10 + (c & 0x0f);
-}
-
-static unsigned int uint2bcd(unsigned int ival)
-{
-	return ((ival / 10) << 4) | (ival % 10);
-}
-
-static void log2msf(unsigned int l, struct cdrom_msf0 *pmsf)
-{
-	l += CD_MSF_OFFSET;
-	pmsf->minute = uint2bcd(l / 4500), l %= 4500;
-	pmsf->second = uint2bcd(l / 75);
-	pmsf->frame = uint2bcd(l % 75);
-}
-
-static unsigned int msf2log(const struct cdrom_msf0 *pmsf)
-{
-	return bcd2uint(pmsf->frame)
-	    + bcd2uint(pmsf->second) * 75
-	    + bcd2uint(pmsf->minute) * 4500 - CD_MSF_OFFSET;
-}
-
-int mcdx_readtoc(struct s_drive_stuff *stuffp)
-/*  Read the toc entries from the CD,
- *  Return: -1 on failure, else 0 */
-{
-
-	if (stuffp->toc) {
-		xtrace(READTOC, "ioctl() toc already read\n");
-		return 0;
-	}
-
-	xtrace(READTOC, "ioctl() readtoc for %d tracks\n",
-	       stuffp->di.n_last - stuffp->di.n_first + 1);
-
-	if (-1 == mcdx_hold(stuffp, 1))
-		return -1;
-
-	xtrace(READTOC, "ioctl() tocmode\n");
-	if (-1 == mcdx_setdrivemode(stuffp, TOC, 1))
-		return -EIO;
-
-	/* all seems to be ok so far ... malloc */
-	{
-		int size;
-		size =
-		    sizeof(struct s_subqcode) * (stuffp->di.n_last -
-						 stuffp->di.n_first + 2);
-
-		xtrace(MALLOC, "ioctl() malloc %d bytes\n", size);
-		stuffp->toc = kmalloc(size, GFP_KERNEL);
-		if (!stuffp->toc) {
-			xwarn("Cannot malloc %d bytes for toc\n", size);
-			mcdx_setdrivemode(stuffp, DATA, 1);
-			return -EIO;
-		}
-	}
-
-	/* now read actually the index */
-	{
-		int trk;
-		int retries;
-
-		for (trk = 0;
-		     trk < (stuffp->di.n_last - stuffp->di.n_first + 1);
-		     trk++)
-			stuffp->toc[trk].index = 0;
-
-		for (retries = 300; retries; retries--) {	/* why 300? */
-			struct s_subqcode q;
-			unsigned int idx;
-
-			if (-1 == mcdx_requestsubqcode(stuffp, &q, 1)) {
-				mcdx_setdrivemode(stuffp, DATA, 1);
-				return -EIO;
-			}
-
-			idx = bcd2uint(q.index);
-
-			if ((idx > 0)
-			    && (idx <= stuffp->di.n_last)
-			    && (q.tno == 0)
-			    && (stuffp->toc[idx - stuffp->di.n_first].
-				index == 0)) {
-				stuffp->toc[idx - stuffp->di.n_first] = q;
-				xtrace(READTOC,
-				       "ioctl() toc idx %d (trk %d)\n",
-				       idx, trk);
-				trk--;
-			}
-			if (trk == 0)
-				break;
-		}
-		memset(&stuffp->
-		       toc[stuffp->di.n_last - stuffp->di.n_first + 1], 0,
-		       sizeof(stuffp->toc[0]));
-		stuffp->toc[stuffp->di.n_last - stuffp->di.n_first +
-			    1].dt = stuffp->di.msf_leadout;
-	}
-
-	/* unset toc mode */
-	xtrace(READTOC, "ioctl() undo toc mode\n");
-	if (-1 == mcdx_setdrivemode(stuffp, DATA, 2))
-		return -EIO;
-
-#if MCDX_DEBUG && READTOC
-	{
-		int trk;
-		for (trk = 0;
-		     trk < (stuffp->di.n_last - stuffp->di.n_first + 2);
-		     trk++)
-			xtrace(READTOC, "ioctl() %d readtoc %02x %02x %02x"
-			       "  %02x:%02x.%02x  %02x:%02x.%02x\n",
-			       trk + stuffp->di.n_first,
-			       stuffp->toc[trk].control,
-			       stuffp->toc[trk].tno,
-			       stuffp->toc[trk].index,
-			       stuffp->toc[trk].tt.minute,
-			       stuffp->toc[trk].tt.second,
-			       stuffp->toc[trk].tt.frame,
-			       stuffp->toc[trk].dt.minute,
-			       stuffp->toc[trk].dt.second,
-			       stuffp->toc[trk].dt.frame);
-	}
-#endif
-
-	return 0;
-}
-
-static int
-mcdx_playmsf(struct s_drive_stuff *stuffp, const struct cdrom_msf *msf)
-{
-	unsigned char cmd[7] = {
-		0, 0, 0, 0, 0, 0, 0
-	};
-
-	if (!stuffp->readcmd) {
-		xinfo("Can't play from missing disk.\n");
-		return -1;
-	}
-
-	cmd[0] = stuffp->playcmd;
-
-	cmd[1] = msf->cdmsf_min0;
-	cmd[2] = msf->cdmsf_sec0;
-	cmd[3] = msf->cdmsf_frame0;
-	cmd[4] = msf->cdmsf_min1;
-	cmd[5] = msf->cdmsf_sec1;
-	cmd[6] = msf->cdmsf_frame1;
-
-	xtrace(PLAYMSF, "ioctl(): play %x "
-	       "%02x:%02x:%02x -- %02x:%02x:%02x\n",
-	       cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], cmd[5], cmd[6]);
-
-	outsb(stuffp->wreg_data, cmd, sizeof cmd);
-
-	if (-1 == mcdx_getval(stuffp, 3 * HZ, 0, NULL)) {
-		xwarn("playmsf() timeout\n");
-		return -1;
-	}
-
-	stuffp->audiostatus = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-static int
-mcdx_playtrk(struct s_drive_stuff *stuffp, const struct cdrom_ti *ti)
-{
-	struct s_subqcode *p;
-	struct cdrom_msf msf;
-
-	if (-1 == mcdx_readtoc(stuffp))
-		return -1;
-
-	if (ti)
-		p = &stuffp->toc[ti->cdti_trk0 - stuffp->di.n_first];
-	else
-		p = &stuffp->start;
-
-	msf.cdmsf_min0 = p->dt.minute;
-	msf.cdmsf_sec0 = p->dt.second;
-	msf.cdmsf_frame0 = p->dt.frame;
-
-	if (ti) {
-		p = &stuffp->toc[ti->cdti_trk1 - stuffp->di.n_first + 1];
-		stuffp->stop = *p;
-	} else
-		p = &stuffp->stop;
-
-	msf.cdmsf_min1 = p->dt.minute;
-	msf.cdmsf_sec1 = p->dt.second;
-	msf.cdmsf_frame1 = p->dt.frame;
-
-	return mcdx_playmsf(stuffp, &msf);
-}
-
-
-/* Drive functions ************************************************/
-
-static int mcdx_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	struct s_drive_stuff *stuffp = cdi->handle;
-
-	if (!stuffp->present)
-		return -ENXIO;
-	if (!(stuffp->present & DOOR))
-		return -ENOSYS;
-
-	if (position)		/* 1: eject */
-		return mcdx_talk(stuffp, "\xf6", 1, NULL, 1, 5 * HZ, 3);
-	else			/* 0: close */
-		return mcdx_talk(stuffp, "\xf8", 1, NULL, 1, 5 * HZ, 3);
-	return 1;
-}
-
-static int mcdx_stop(struct s_drive_stuff *stuffp, int tries)
-{
-	return mcdx_talk(stuffp, "\xf0", 1, NULL, 1, 2 * HZ, tries);
-}
-
-static int mcdx_hold(struct s_drive_stuff *stuffp, int tries)
-{
-	return mcdx_talk(stuffp, "\x70", 1, NULL, 1, 2 * HZ, tries);
-}
-
-static int mcdx_requestsubqcode(struct s_drive_stuff *stuffp,
-		     struct s_subqcode *sub, int tries)
-{
-	char buf[11];
-	int ans;
-
-	if (-1 == (ans = mcdx_talk(stuffp, "\x20", 1, buf, sizeof(buf),
-				   2 * HZ, tries)))
-		return -1;
-	sub->control = buf[1];
-	sub->tno = buf[2];
-	sub->index = buf[3];
-	sub->tt.minute = buf[4];
-	sub->tt.second = buf[5];
-	sub->tt.frame = buf[6];
-	sub->dt.minute = buf[8];
-	sub->dt.second = buf[9];
-	sub->dt.frame = buf[10];
-
-	return ans;
-}
-
-static int mcdx_requestmultidiskinfo(struct s_drive_stuff *stuffp,
-			  struct s_multi *multi, int tries)
-{
-	char buf[5];
-	int ans;
-
-	if (stuffp->present & MULTI) {
-		ans =
-		    mcdx_talk(stuffp, "\x11", 1, buf, sizeof(buf), 2 * HZ,
-			      tries);
-		multi->multi = buf[1];
-		multi->msf_last.minute = buf[2];
-		multi->msf_last.second = buf[3];
-		multi->msf_last.frame = buf[4];
-		return ans;
-	} else {
-		multi->multi = 0;
-		return 0;
-	}
-}
-
-static int mcdx_requesttocdata(struct s_drive_stuff *stuffp, struct s_diskinfo *info,
-		    int tries)
-{
-	char buf[9];
-	int ans;
-	ans =
-	    mcdx_talk(stuffp, "\x10", 1, buf, sizeof(buf), 2 * HZ, tries);
-	if (ans == -1) {
-		info->n_first = 0;
-		info->n_last = 0;
-	} else {
-		info->n_first = bcd2uint(buf[1]);
-		info->n_last = bcd2uint(buf[2]);
-		info->msf_leadout.minute = buf[3];
-		info->msf_leadout.second = buf[4];
-		info->msf_leadout.frame = buf[5];
-		info->msf_first.minute = buf[6];
-		info->msf_first.second = buf[7];
-		info->msf_first.frame = buf[8];
-	}
-	return ans;
-}
-
-static int mcdx_setdrivemode(struct s_drive_stuff *stuffp, enum drivemodes mode,
-		  int tries)
-{
-	char cmd[2];
-	int ans;
-
-	xtrace(HW, "setdrivemode() %d\n", mode);
-
-	if (-1 == (ans = mcdx_talk(stuffp, "\xc2", 1, cmd, sizeof(cmd), 5 * HZ, tries)))
-		return -1;
-
-	switch (mode) {
-	case TOC:
-		cmd[1] |= 0x04;
-		break;
-	case DATA:
-		cmd[1] &= ~0x04;
-		break;
-	case RAW:
-		cmd[1] |= 0x40;
-		break;
-	case COOKED:
-		cmd[1] &= ~0x40;
-		break;
-	default:
-		break;
-	}
-	cmd[0] = 0x50;
-	return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_setdatamode(struct s_drive_stuff *stuffp, enum datamodes mode,
-		 int tries)
-{
-	unsigned char cmd[2] = { 0xa0 };
-	xtrace(HW, "setdatamode() %d\n", mode);
-	switch (mode) {
-	case MODE0:
-		cmd[1] = 0x00;
-		break;
-	case MODE1:
-		cmd[1] = 0x01;
-		break;
-	case MODE2:
-		cmd[1] = 0x02;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_config(struct s_drive_stuff *stuffp, int tries)
-{
-	char cmd[4];
-
-	xtrace(HW, "config()\n");
-
-	cmd[0] = 0x90;
-
-	cmd[1] = 0x10;		/* irq enable */
-	cmd[2] = 0x05;		/* pre, err irq enable */
-
-	if (-1 == mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries))
-		return -1;
-
-	cmd[1] = 0x02;		/* dma select */
-	cmd[2] = 0x00;		/* no dma */
-
-	return mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries);
-}
-
-static int mcdx_requestversion(struct s_drive_stuff *stuffp, struct s_version *ver,
-		    int tries)
-{
-	char buf[3];
-	int ans;
-
-	if (-1 == (ans = mcdx_talk(stuffp, "\xdc",
-				   1, buf, sizeof(buf), 2 * HZ, tries)))
-		return ans;
-
-	ver->code = buf[1];
-	ver->ver = buf[2];
-
-	return ans;
-}
-
-static int mcdx_reset(struct s_drive_stuff *stuffp, enum resetmodes mode, int tries)
-{
-	if (mode == HARD) {
-		outb(0, stuffp->wreg_chn);	/* no dma, no irq -> hardware */
-		outb(0, stuffp->wreg_reset);	/* hw reset */
-		return 0;
-	} else
-		return mcdx_talk(stuffp, "\x60", 1, NULL, 1, 5 * HZ, tries);
-}
-
-static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock)
-{
-	struct s_drive_stuff *stuffp = cdi->handle;
-	char cmd[2] = { 0xfe };
-
-	if (!(stuffp->present & DOOR))
-		return -ENOSYS;
-	if (stuffp->present & DOOR) {
-		cmd[1] = lock ? 0x01 : 0x00;
-		return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 1, 5 * HZ, 3);
-	} else
-		return 0;
-}
-
-static int mcdx_getstatus(struct s_drive_stuff *stuffp, int tries)
-{
-	return mcdx_talk(stuffp, "\x40", 1, NULL, 1, 5 * HZ, tries);
-}
-
-static int
-mcdx_getval(struct s_drive_stuff *stuffp, int to, int delay, char *buf)
-{
-	unsigned long timeout = to + jiffies;
-	char c;
-
-	if (!buf)
-		buf = &c;
-
-	while (inb(stuffp->rreg_status) & MCDX_RBIT_STEN) {
-		if (time_after(jiffies, timeout))
-			return -1;
-		mcdx_delay(stuffp, delay);
-	}
-
-	*buf = (unsigned char) inb(stuffp->rreg_data) & 0xff;
-
-	return 0;
-}
-
-static int mcdx_setattentuator(struct s_drive_stuff *stuffp,
-		    struct cdrom_volctrl *vol, int tries)
-{
-	char cmd[5];
-	cmd[0] = 0xae;
-	cmd[1] = vol->channel0;
-	cmd[2] = 0;
-	cmd[3] = vol->channel1;
-	cmd[4] = 0;
-
-	return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 5, 200, tries);
-}
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(MITSUMI_X_CDROM_MAJOR);
diff --git a/drivers/cdrom/mcdx.h b/drivers/cdrom/mcdx.h
deleted file mode 100644
index 83c364a74dc4..000000000000
--- a/drivers/cdrom/mcdx.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Definitions for the Mitsumi CDROM interface
- * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de>
- * VERSION: @VERSION@
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Thanks to
- *  The Linux Community at all and ...
- *  Martin Harris (he wrote the first Mitsumi Driver)
- *  Eberhard Moenkeberg (he gave me much support and the initial kick)
- *  Bernd Huebner, Ruediger Helsch (Unifix-Software Gmbh, they
- *      improved the original driver)
- *  Jon Tombs, Bjorn Ekwall (module support)
- *  Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
- *  Gerd Knorr (he lent me his PhotoCD)
- *  Nils Faerber and Roger E. Wolff (extensively tested the LU portion)
- *  Andreas Kies (testing the mysterious hang up's)
- *  ... somebody forgotten?
- *  Marcin Dalecki
- *  
- */
-
-/*
- *	The following lines are for user configuration
- *	~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *	{0|1} -- 1 if you want the driver detect your drive, may crash and
- *	needs a long time to seek.  The higher the address the longer the
- *	seek.
- *
- *  WARNING: AUTOPROBE doesn't work.
- */
-#define MCDX_AUTOPROBE 0
-
-/*
- *	Drive specific settings according to the jumpers on the controller
- *	board(s).
- *	o	MCDX_NDRIVES  :  number of used entries of the following table
- *	o	MCDX_DRIVEMAP :  table of {i/o base, irq} per controller
- *
- *	NOTE: I didn't get a drive at irq 9(2) working.  Not even alone.
- */
-#if MCDX_AUTOPROBE == 0
-	#define MCDX_NDRIVES 1
-	#define MCDX_DRIVEMAP {		\
-			{0x300, 11},	\
-			{0x304, 05},  	\
-			{0x000, 00},  	\
-			{0x000, 00},  	\
-			{0x000, 00},  	\
-	  	}
-#else
-	#error Autoprobing is not implemented yet.
-#endif
-
-#ifndef MCDX_QUIET
-#define MCDX_QUIET   1
-#endif
-
-#ifndef MCDX_DEBUG
-#define MCDX_DEBUG   0
-#endif
-
-/* *** make the following line uncommented, if you're sure,
- * *** all configuration is done */
-/* #define I_WAS_HERE */
-
-/*	The name of the device */
-#define MCDX "mcdx"	
-
-/* Flags for DEBUGGING */
-#define INIT 		0
-#define MALLOC 		0
-#define IOCTL 		0
-#define PLAYTRK     0
-#define SUBCHNL     0
-#define TOCHDR      0
-#define MS          0
-#define PLAYMSF     0
-#define READTOC     0
-#define OPENCLOSE 	0
-#define HW		    0
-#define TALK		0
-#define IRQ 		0
-#define XFER 		0
-#define REQUEST	 	0
-#define SLEEP		0
-
-/*	The following addresses are taken from the Mitsumi Reference 
- *  and describe the possible i/o range for the controller.
- */
-#define MCDX_IO_BEGIN	((char*) 0x300)	/* first base of i/o addr */
-#define MCDX_IO_END		((char*) 0x3fc)	/* last base of i/o addr */
-
-/*	Per controller 4 bytes i/o are needed. */
-#define MCDX_IO_SIZE		4
-
-/*
- *	Bits
- */
-
-/* The status byte, returned from every command, set if
- * the description is true */
-#define MCDX_RBIT_OPEN       0x80	/* door is open */
-#define MCDX_RBIT_DISKSET    0x40	/* disk set (recognised) */
-#define MCDX_RBIT_CHANGED    0x20	/* disk was changed */
-#define MCDX_RBIT_CHECK      0x10	/* disk rotates, servo is on */
-#define MCDX_RBIT_AUDIOTR    0x08   /* current track is audio */
-#define MCDX_RBIT_RDERR      0x04	/* read error, refer SENSE KEY */
-#define MCDX_RBIT_AUDIOBS    0x02	/* currently playing audio */
-#define MCDX_RBIT_CMDERR     0x01	/* command, param or format error */
-
-/* The I/O Register holding the h/w status of the drive,
- * can be read at i/o base + 1 */
-#define MCDX_RBIT_DOOR       0x10	/* door is open */
-#define MCDX_RBIT_STEN       0x04	/* if 0, i/o base contains drive status */
-#define MCDX_RBIT_DTEN       0x02	/* if 0, i/o base contains data */
-
-/*
- *	The commands.
- */
-
-#define OPCODE	1		/* offset of opcode */
-#define MCDX_CMD_REQUEST_TOC		1, 0x10
-#define MCDX_CMD_REQUEST_STATUS		1, 0x40 
-#define MCDX_CMD_RESET				1, 0x60
-#define MCDX_CMD_REQUEST_DRIVE_MODE	1, 0xc2
-#define MCDX_CMD_SET_INTERLEAVE		2, 0xc8, 0
-#define MCDX_CMD_DATAMODE_SET		2, 0xa0, 0
-	#define MCDX_DATAMODE1		0x01
-	#define MCDX_DATAMODE2		0x02
-#define MCDX_CMD_LOCK_DOOR		2, 0xfe, 0
-
-#define READ_AHEAD			4	/* 8 Sectors (4K) */
-
-/*	Useful macros */
-#define e_door(x)		((x) & MCDX_RBIT_OPEN)
-#define e_check(x)		(~(x) & MCDX_RBIT_CHECK)
-#define e_notset(x)		(~(x) & MCDX_RBIT_DISKSET)
-#define e_changed(x)	((x) & MCDX_RBIT_CHANGED)
-#define e_audio(x)		((x) & MCDX_RBIT_AUDIOTR)
-#define e_audiobusy(x)	((x) & MCDX_RBIT_AUDIOBS)
-#define e_cmderr(x)		((x) & MCDX_RBIT_CMDERR)
-#define e_readerr(x)	((x) & MCDX_RBIT_RDERR)
-
-/**	no drive specific */
-#define MCDX_CDBLK	2048	/* 2048 cooked data each blk */
-
-#define MCDX_DATA_TIMEOUT	(HZ/10)	/* 0.1 second */
-
-/*
- * Access to the msf array
- */
-#define MSF_MIN		0			/* minute */
-#define MSF_SEC		1			/* second */
-#define MSF_FRM		2			/* frame  */
-
-/*
- * Errors
- */
-#define MCDX_E		1			/* unspec error */
-#define MCDX_ST_EOM 0x0100		/* end of media */
-#define MCDX_ST_DRV 0x00ff		/* mask to query the drive status */
-
-#ifndef I_WAS_HERE
-#ifndef MODULE
-#warning You have not edited mcdx.h
-#warning Perhaps irq and i/o settings are wrong.
-#endif
-#endif
-
-/* ex:set ts=4 sw=4: */
diff --git a/drivers/cdrom/optcd.c b/drivers/cdrom/optcd.c
deleted file mode 100644
index 3541690a77d4..000000000000
--- a/drivers/cdrom/optcd.c
+++ /dev/null
@@ -1,2105 +0,0 @@
-/*	linux/drivers/cdrom/optcd.c - Optics Storage 8000 AT CDROM driver
-	$Id: optcd.c,v 1.11 1997/01/26 07:13:00 davem Exp $
-
-	Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl)
-
-
-	Based on Aztech CD268 CDROM driver by Werner Zimmermann and preworks
-	by Eberhard Moenkeberg (emoenke@gwdg.de). 
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2, or (at your option)
-	any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*	Revision history
-
-
-	14-5-95		v0.0	Plays sound tracks. No reading of data CDs yet.
-				Detection of disk change doesn't work.
-	21-5-95		v0.1	First ALPHA version. CD can be mounted. The
-				device major nr is borrowed from the Aztech
-				driver. Speed is around 240 kb/s, as measured
-				with "time dd if=/dev/cdrom of=/dev/null \
-				bs=2048 count=4096".
-	24-6-95		v0.2	Reworked the #defines for the command codes
-				and the like, as well as the structure of
-				the hardware communication protocol, to
-				reflect the "official" documentation, kindly
-				supplied by C.K. Tan, Optics Storage Pte. Ltd.
-				Also tidied up the state machine somewhat.
-	28-6-95		v0.3	Removed the ISP-16 interface code, as this
-				should go into its own driver. The driver now
-				has its own major nr.
-				Disk change detection now seems to work, too.
-				This version became part of the standard
-				kernel as of version 1.3.7
-	24-9-95		v0.4	Re-inserted ISP-16 interface code which I
-				copied from sjcd.c, with a few changes.
-				Updated README.optcd. Submitted for
-				inclusion in 1.3.21
-	29-9-95		v0.4a	Fixed bug that prevented compilation as module
-	25-10-95	v0.5	Started multisession code. Implementation
-				copied from Werner Zimmermann, who copied it
-				from Heiko Schlittermann's mcdx.
-	17-1-96		v0.6	Multisession works; some cleanup too.
-	18-4-96		v0.7	Increased some timing constants;
-				thanks to Luke McFarlane. Also tidied up some
-				printk behaviour. ISP16 initialization
-				is now handled by a separate driver.
-				
-	09-11-99 	  	Make kernel-parameter implementation work with 2.3.x 
-	                 	Removed init_module & cleanup_module in favor of 
-			 	module_init & module_exit.
-			 	Torben Mathiasen <tmm@image.dk>
-*/
-
-/* Includes */
-
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <linux/blkdev.h>
-
-#include <linux/cdrom.h>
-#include "optcd.h"
-
-#include <asm/uaccess.h>
-
-#define MAJOR_NR OPTICS_CDROM_MAJOR
-#define QUEUE (opt_queue)
-#define CURRENT elv_next_request(opt_queue)
-
-
-/* Debug support */
-
-
-/* Don't forget to add new debug flags here. */
-#if DEBUG_DRIVE_IF | DEBUG_VFS | DEBUG_CONV | DEBUG_TOC | \
-    DEBUG_BUFFERS | DEBUG_REQUEST | DEBUG_STATE | DEBUG_MULTIS
-#define DEBUG(x) debug x
-static void debug(int debug_this, const char* fmt, ...)
-{
-	char s[1024];
-	va_list args;
-
-	if (!debug_this)
-		return;
-
-	va_start(args, fmt);
-	vsnprintf(s, sizeof(s), fmt, args);
-	printk(KERN_DEBUG "optcd: %s\n", s);
-	va_end(args);
-}
-#else
-#define DEBUG(x)
-#endif
-
-
-/* Drive hardware/firmware characteristics
-   Identifiers in accordance with Optics Storage documentation */
-
-
-#define optcd_port optcd			/* Needed for the modutils. */
-static short optcd_port = OPTCD_PORTBASE;	/* I/O base of drive. */
-module_param(optcd_port, short, 0);
-/* Drive registers, read */
-#define DATA_PORT	optcd_port	/* Read data/status */
-#define STATUS_PORT	optcd_port+1	/* Indicate data/status availability */
-
-/* Drive registers, write */
-#define COMIN_PORT	optcd_port	/* For passing command/parameter */
-#define RESET_PORT	optcd_port+1	/* Write anything and wait 0.5 sec */
-#define HCON_PORT	optcd_port+2	/* Host Xfer Configuration */
-
-
-/* Command completion/status read from DATA register */
-#define ST_DRVERR		0x80
-#define ST_DOOR_OPEN		0x40
-#define ST_MIXEDMODE_DISK	0x20
-#define ST_MODE_BITS		0x1c
-#define ST_M_STOP		0x00
-#define ST_M_READ		0x04
-#define ST_M_AUDIO		0x04
-#define ST_M_PAUSE		0x08
-#define ST_M_INITIAL		0x0c
-#define ST_M_ERROR		0x10
-#define ST_M_OTHERS		0x14
-#define	ST_MODE2TRACK		0x02
-#define	ST_DSK_CHG		0x01
-#define ST_L_LOCK		0x01
-#define ST_CMD_OK		0x00
-#define ST_OP_OK		0x01
-#define ST_PA_OK		0x02
-#define ST_OP_ERROR		0x05
-#define ST_PA_ERROR		0x06
-
-
-/* Error codes (appear as command completion code from DATA register) */
-/* Player related errors */
-#define ERR_ILLCMD	0x11	/* Illegal command to player module */
-#define ERR_ILLPARM	0x12	/* Illegal parameter to player module */
-#define ERR_SLEDGE	0x13
-#define ERR_FOCUS	0x14
-#define ERR_MOTOR	0x15
-#define ERR_RADIAL	0x16
-#define ERR_PLL		0x17	/* PLL lock error */
-#define ERR_SUB_TIM	0x18	/* Subcode timeout error */
-#define ERR_SUB_NF	0x19	/* Subcode not found error */
-#define ERR_TRAY	0x1a
-#define ERR_TOC		0x1b	/* Table of Contents read error */
-#define ERR_JUMP	0x1c
-/* Data errors */
-#define ERR_MODE	0x21
-#define ERR_FORM	0x22
-#define ERR_HEADADDR	0x23	/* Header Address not found */
-#define ERR_CRC		0x24
-#define ERR_ECC		0x25	/* Uncorrectable ECC error */
-#define ERR_CRC_UNC	0x26	/* CRC error and uncorrectable error */
-#define ERR_ILLBSYNC	0x27	/* Illegal block sync error */
-#define ERR_VDST	0x28	/* VDST not found */
-/* Timeout errors */
-#define ERR_READ_TIM	0x31	/* Read timeout error */
-#define ERR_DEC_STP	0x32	/* Decoder stopped */
-#define ERR_DEC_TIM	0x33	/* Decoder interrupt timeout error */
-/* Function abort codes */
-#define ERR_KEY		0x41	/* Key -Detected abort */
-#define ERR_READ_FINISH	0x42	/* Read Finish */
-/* Second Byte diagnostic codes */
-#define ERR_NOBSYNC	0x01	/* No block sync */
-#define ERR_SHORTB	0x02	/* Short block */
-#define ERR_LONGB	0x03	/* Long block */
-#define ERR_SHORTDSP	0x04	/* Short DSP word */
-#define ERR_LONGDSP	0x05	/* Long DSP word */
-
-
-/* Status availability flags read from STATUS register */
-#define FL_EJECT	0x20
-#define FL_WAIT		0x10	/* active low */
-#define FL_EOP		0x08	/* active low */
-#define FL_STEN		0x04	/* Status available when low */
-#define FL_DTEN		0x02	/* Data available when low */
-#define FL_DRQ		0x01	/* active low */
-#define FL_RESET	0xde	/* These bits are high after a reset */
-#define FL_STDT		(FL_STEN|FL_DTEN)
-
-
-/* Transfer mode, written to HCON register */
-#define HCON_DTS	0x08
-#define HCON_SDRQB	0x04
-#define HCON_LOHI	0x02
-#define HCON_DMA16	0x01
-
-
-/* Drive command set, written to COMIN register */
-/* Quick response commands */
-#define COMDRVST	0x20	/* Drive Status Read */
-#define COMERRST	0x21	/* Error Status Read */
-#define COMIOCTLISTAT	0x22	/* Status Read; reset disk changed bit */
-#define COMINITSINGLE	0x28	/* Initialize Single Speed */
-#define COMINITDOUBLE	0x29	/* Initialize Double Speed */
-#define COMUNLOCK	0x30	/* Unlock */
-#define COMLOCK		0x31	/* Lock */
-#define COMLOCKST	0x32	/* Lock/Unlock Status */
-#define COMVERSION	0x40	/* Get Firmware Revision */
-#define COMVOIDREADMODE	0x50	/* Void Data Read Mode */
-/* Read commands */
-#define COMFETCH	0x60	/* Prefetch Data */
-#define COMREAD		0x61	/* Read */
-#define COMREADRAW	0x62	/* Read Raw Data */
-#define COMREADALL	0x63	/* Read All 2646 Bytes */
-/* Player control commands */
-#define COMLEADIN	0x70	/* Seek To Lead-in */
-#define COMSEEK		0x71	/* Seek */
-#define COMPAUSEON	0x80	/* Pause On */
-#define COMPAUSEOFF	0x81	/* Pause Off */
-#define COMSTOP		0x82	/* Stop */
-#define COMOPEN		0x90	/* Open Tray Door */
-#define COMCLOSE	0x91	/* Close Tray Door */
-#define COMPLAY		0xa0	/* Audio Play */
-#define COMPLAY_TNO	0xa2	/* Audio Play By Track Number */
-#define COMSUBQ		0xb0	/* Read Sub-q Code */
-#define COMLOCATION	0xb1	/* Read Head Position */
-/* Audio control commands */
-#define COMCHCTRL	0xc0	/* Audio Channel Control */
-/* Miscellaneous (test) commands */
-#define COMDRVTEST	0xd0	/* Write Test Bytes */
-#define COMTEST		0xd1	/* Diagnostic Test */
-
-/* Low level drive interface. Only here we do actual I/O
-   Waiting for status / data available */
-
-
-/* Busy wait until FLAG goes low. Return 0 on timeout. */
-static inline int flag_low(int flag, unsigned long timeout)
-{
-	int flag_high;
-	unsigned long count = 0;
-
-	while ((flag_high = (inb(STATUS_PORT) & flag)))
-		if (++count >= timeout)
-			break;
-
-	DEBUG((DEBUG_DRIVE_IF, "flag_low 0x%x count %ld%s",
-		flag, count, flag_high ? " timeout" : ""));
-	return !flag_high;
-}
-
-
-/* Timed waiting for status or data */
-static int sleep_timeout;	/* max # of ticks to sleep */
-static DECLARE_WAIT_QUEUE_HEAD(waitq);
-static void sleep_timer(unsigned long data);
-static DEFINE_TIMER(delay_timer, sleep_timer, 0, 0);
-static DEFINE_SPINLOCK(optcd_lock);
-static struct request_queue *opt_queue;
-
-/* Timer routine: wake up when desired flag goes low,
-   or when timeout expires. */
-static void sleep_timer(unsigned long data)
-{
-	int flags = inb(STATUS_PORT) & FL_STDT;
-
-	if (flags == FL_STDT && --sleep_timeout > 0) {
-		mod_timer(&delay_timer, jiffies + HZ/100); /* multi-statement macro */
-	} else
-		wake_up(&waitq);
-}
-
-
-/* Sleep until FLAG goes low. Return 0 on timeout or wrong flag low. */
-static int sleep_flag_low(int flag, unsigned long timeout)
-{
-	int flag_high;
-
-	DEBUG((DEBUG_DRIVE_IF, "sleep_flag_low"));
-
-	sleep_timeout = timeout;
-	flag_high = inb(STATUS_PORT) & flag;
-	if (flag_high && sleep_timeout > 0) {
-		mod_timer(&delay_timer, jiffies + HZ/100);
-		sleep_on(&waitq);
-		flag_high = inb(STATUS_PORT) & flag;
-	}
-
-	DEBUG((DEBUG_DRIVE_IF, "flag 0x%x count %ld%s",
-		flag, timeout, flag_high ? " timeout" : ""));
-	return !flag_high;
-}
-
-/* Low level drive interface. Only here we do actual I/O
-   Sending commands and parameters */
-
-
-/* Errors in the command protocol */
-#define ERR_IF_CMD_TIMEOUT	0x100
-#define ERR_IF_ERR_TIMEOUT	0x101
-#define ERR_IF_RESP_TIMEOUT	0x102
-#define ERR_IF_DATA_TIMEOUT	0x103
-#define ERR_IF_NOSTAT		0x104
-
-
-/* Send command code. Return <0 indicates error */
-static int send_cmd(int cmd)
-{
-	unsigned char ack;
-
-	DEBUG((DEBUG_DRIVE_IF, "sending command 0x%02x\n", cmd));
-
-	outb(HCON_DTS, HCON_PORT);	/* Enable Suspend Data Transfer */
-	outb(cmd, COMIN_PORT);		/* Send command code */
-	if (!flag_low(FL_STEN, BUSY_TIMEOUT))	/* Wait for status */
-		return -ERR_IF_CMD_TIMEOUT;
-	ack = inb(DATA_PORT);		/* read command acknowledge */
-	outb(HCON_SDRQB, HCON_PORT);	/* Disable Suspend Data Transfer */
-	return ack==ST_OP_OK ? 0 : -ack;
-}
-
-
-/* Send command parameters. Return <0 indicates error */
-static int send_params(struct cdrom_msf *params)
-{
-	unsigned char ack;
-
-	DEBUG((DEBUG_DRIVE_IF, "sending parameters"
-		" %02x:%02x:%02x"
-		" %02x:%02x:%02x",
-		params->cdmsf_min0,
-		params->cdmsf_sec0,
-		params->cdmsf_frame0,
-		params->cdmsf_min1,
-		params->cdmsf_sec1,
-		params->cdmsf_frame1));
-
-	outb(params->cdmsf_min0, COMIN_PORT);
-	outb(params->cdmsf_sec0, COMIN_PORT);
-	outb(params->cdmsf_frame0, COMIN_PORT);
-	outb(params->cdmsf_min1, COMIN_PORT);
-	outb(params->cdmsf_sec1, COMIN_PORT);
-	outb(params->cdmsf_frame1, COMIN_PORT);
-	if (!flag_low(FL_STEN, BUSY_TIMEOUT))	/* Wait for status */
-		return -ERR_IF_CMD_TIMEOUT;
-	ack = inb(DATA_PORT);		/* read command acknowledge */
-	return ack==ST_PA_OK ? 0 : -ack;
-}
-
-
-/* Send parameters for SEEK command. Return <0 indicates error */
-static int send_seek_params(struct cdrom_msf *params)
-{
-	unsigned char ack;
-
-	DEBUG((DEBUG_DRIVE_IF, "sending seek parameters"
-		" %02x:%02x:%02x",
-		params->cdmsf_min0,
-		params->cdmsf_sec0,
-		params->cdmsf_frame0));
-
-	outb(params->cdmsf_min0, COMIN_PORT);
-	outb(params->cdmsf_sec0, COMIN_PORT);
-	outb(params->cdmsf_frame0, COMIN_PORT);
-	if (!flag_low(FL_STEN, BUSY_TIMEOUT))	/* Wait for status */
-		return -ERR_IF_CMD_TIMEOUT;
-	ack = inb(DATA_PORT);		/* read command acknowledge */
-	return ack==ST_PA_OK ? 0 : -ack;
-}
-
-
-/* Wait for command execution status. Choice between busy waiting
-   and sleeping. Return value <0 indicates timeout. */
-static inline int get_exec_status(int busy_waiting)
-{
-	unsigned char exec_status;
-
-	if (busy_waiting
-	    ? !flag_low(FL_STEN, BUSY_TIMEOUT)
-	    : !sleep_flag_low(FL_STEN, SLEEP_TIMEOUT))
-		return -ERR_IF_CMD_TIMEOUT;
-
-	exec_status = inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "returned exec status 0x%02x", exec_status));
-	return exec_status;
-}
-
-
-/* Wait busy for extra byte of data that a command returns.
-   Return value <0 indicates timeout. */
-static inline int get_data(int short_timeout)
-{
-	unsigned char data;
-
-	if (!flag_low(FL_STEN, short_timeout ? FAST_TIMEOUT : BUSY_TIMEOUT))
-		return -ERR_IF_DATA_TIMEOUT;
-
-	data = inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "returned data 0x%02x", data));
-	return data;
-}
-
-
-/* Returns 0 if failed */
-static int reset_drive(void)
-{
-	unsigned long count = 0;
-	int flags;
-
-	DEBUG((DEBUG_DRIVE_IF, "reset drive"));
-
-	outb(0, RESET_PORT);
-	while (++count < RESET_WAIT)
-		inb(DATA_PORT);
-
-	count = 0;
-	while ((flags = (inb(STATUS_PORT) & FL_RESET)) != FL_RESET)
-		if (++count >= BUSY_TIMEOUT)
-			break;
-
-	DEBUG((DEBUG_DRIVE_IF, "reset %s",
-		flags == FL_RESET ? "succeeded" : "failed"));
-
-	if (flags != FL_RESET)
-		return 0;		/* Reset failed */
-	outb(HCON_SDRQB, HCON_PORT);	/* Disable Suspend Data Transfer */
-	return 1;			/* Reset succeeded */
-}
-
-
-/* Facilities for asynchronous operation */
-
-/* Read status/data availability flags FL_STEN and FL_DTEN */
-static inline int stdt_flags(void)
-{
-	return inb(STATUS_PORT) & FL_STDT;
-}
-
-
-/* Fetch status that has previously been waited for. <0 means not available */
-static inline int fetch_status(void)
-{
-	unsigned char status;
-
-	if (inb(STATUS_PORT) & FL_STEN)
-		return -ERR_IF_NOSTAT;
-
-	status = inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "fetched exec status 0x%02x", status));
-	return status;
-}
-
-
-/* Fetch data that has previously been waited for. */
-static inline void fetch_data(char *buf, int n)
-{
-	insb(DATA_PORT, buf, n);
-	DEBUG((DEBUG_DRIVE_IF, "fetched 0x%x bytes", n));
-}
-
-
-/* Flush status and data fifos */
-static inline void flush_data(void)
-{
-	while ((inb(STATUS_PORT) & FL_STDT) != FL_STDT)
-		inb(DATA_PORT);
-	DEBUG((DEBUG_DRIVE_IF, "flushed fifos"));
-}
-
-/* Command protocol */
-
-
-/* Send a simple command and wait for response. Command codes < COMFETCH
-   are quick response commands */
-static inline int exec_cmd(int cmd)
-{
-	int ack = send_cmd(cmd);
-	if (ack < 0)
-		return ack;
-	return get_exec_status(cmd < COMFETCH);
-}
-
-
-/* Send a command with parameters. Don't wait for the response,
- * which consists of data blocks read from the CD. */
-static inline int exec_read_cmd(int cmd, struct cdrom_msf *params)
-{
-	int ack = send_cmd(cmd);
-	if (ack < 0)
-		return ack;
-	return send_params(params);
-}
-
-
-/* Send a seek command with parameters and wait for response */
-static inline int exec_seek_cmd(int cmd, struct cdrom_msf *params)
-{
-	int ack = send_cmd(cmd);
-	if (ack < 0)
-		return ack;
-	ack = send_seek_params(params);
-	if (ack < 0)
-		return ack;
-	return 0;
-}
-
-
-/* Send a command with parameters and wait for response */
-static inline int exec_long_cmd(int cmd, struct cdrom_msf *params)
-{
-	int ack = exec_read_cmd(cmd, params);
-	if (ack < 0)
-		return ack;
-	return get_exec_status(0);
-}
-
-/* Address conversion routines */
-
-
-/* Binary to BCD (2 digits) */
-static inline void single_bin2bcd(u_char *p)
-{
-	DEBUG((DEBUG_CONV, "bin2bcd %02d", *p));
-	*p = (*p % 10) | ((*p / 10) << 4);
-}
-
-
-/* Convert entire msf struct */
-static void bin2bcd(struct cdrom_msf *msf)
-{
-	single_bin2bcd(&msf->cdmsf_min0);
-	single_bin2bcd(&msf->cdmsf_sec0);
-	single_bin2bcd(&msf->cdmsf_frame0);
-	single_bin2bcd(&msf->cdmsf_min1);
-	single_bin2bcd(&msf->cdmsf_sec1);
-	single_bin2bcd(&msf->cdmsf_frame1);
-}
-
-
-/* Linear block address to minute, second, frame form */
-#define CD_FPM	(CD_SECS * CD_FRAMES)	/* frames per minute */
-
-static void lba2msf(int lba, struct cdrom_msf *msf)
-{
-	DEBUG((DEBUG_CONV, "lba2msf %d", lba));
-	lba += CD_MSF_OFFSET;
-	msf->cdmsf_min0 = lba / CD_FPM; lba %= CD_FPM;
-	msf->cdmsf_sec0 = lba / CD_FRAMES;
-	msf->cdmsf_frame0 = lba % CD_FRAMES;
-	msf->cdmsf_min1 = 0;
-	msf->cdmsf_sec1 = 0;
-	msf->cdmsf_frame1 = 0;
-	bin2bcd(msf);
-}
-
-
-/* Two BCD digits to binary */
-static inline u_char bcd2bin(u_char bcd)
-{
-	DEBUG((DEBUG_CONV, "bcd2bin %x%02x", bcd));
-	return (bcd >> 4) * 10 + (bcd & 0x0f);
-}
-
-
-static void msf2lba(union cdrom_addr *addr)
-{
-	addr->lba = addr->msf.minute * CD_FPM
-	            + addr->msf.second * CD_FRAMES
-	            + addr->msf.frame - CD_MSF_OFFSET;
-}
-
-
-/* Minute, second, frame address BCD to binary or to linear address,
-   depending on MODE */
-static void msf_bcd2bin(union cdrom_addr *addr)
-{
-	addr->msf.minute = bcd2bin(addr->msf.minute);
-	addr->msf.second = bcd2bin(addr->msf.second);
-	addr->msf.frame = bcd2bin(addr->msf.frame);
-}
-
-/* High level drive commands */
-
-
-static int audio_status = CDROM_AUDIO_NO_STATUS;
-static char toc_uptodate = 0;
-static char disk_changed = 1;
-
-/* Get drive status, flagging completion of audio play and disk changes. */
-static int drive_status(void)
-{
-	int status;
-
-	status = exec_cmd(COMIOCTLISTAT);
-	DEBUG((DEBUG_DRIVE_IF, "IOCTLISTAT: %03x", status));
-	if (status < 0)
-		return status;
-	if (status == 0xff)	/* No status available */
-		return -ERR_IF_NOSTAT;
-
-	if (((status & ST_MODE_BITS) != ST_M_AUDIO) &&
-		(audio_status == CDROM_AUDIO_PLAY)) {
-		audio_status = CDROM_AUDIO_COMPLETED;
-	}
-
-	if (status & ST_DSK_CHG) {
-		toc_uptodate = 0;
-		disk_changed = 1;
-		audio_status = CDROM_AUDIO_NO_STATUS;
-	}
-
-	return status;
-}
-
-
-/* Read the current Q-channel info. Also used for reading the
-   table of contents. qp->cdsc_format must be set on entry to
-   indicate the desired address format */
-static int get_q_channel(struct cdrom_subchnl *qp)
-{
-	int status, d1, d2, d3, d4, d5, d6, d7, d8, d9, d10;
-
-	status = drive_status();
-	if (status < 0)
-		return status;
-	qp->cdsc_audiostatus = audio_status;
-
-	status = exec_cmd(COMSUBQ);
-	if (status < 0)
-		return status;
-
-	d1 = get_data(0);
-	if (d1 < 0)
-		return d1;
-	qp->cdsc_adr = d1;
-	qp->cdsc_ctrl = d1 >> 4;
-
-	d2 = get_data(0);
-	if (d2 < 0)
-		return d2;
-	qp->cdsc_trk = bcd2bin(d2);
-
-	d3 = get_data(0);
-	if (d3 < 0)
-		return d3;
-	qp->cdsc_ind = bcd2bin(d3);
-
-	d4 = get_data(0);
-	if (d4 < 0)
-		return d4;
-	qp->cdsc_reladdr.msf.minute = d4;
-
-	d5 = get_data(0);
-	if (d5 < 0)
-		return d5;
-	qp->cdsc_reladdr.msf.second = d5;
-
-	d6 = get_data(0);
-	if (d6 < 0)
-		return d6;
-	qp->cdsc_reladdr.msf.frame = d6;
-
-	d7 = get_data(0);
-	if (d7 < 0)
-		return d7;
-	/* byte not used */
-
-	d8 = get_data(0);
-	if (d8 < 0)
-		return d8;
-	qp->cdsc_absaddr.msf.minute = d8;
-
-	d9 = get_data(0);
-	if (d9 < 0)
-		return d9;
-	qp->cdsc_absaddr.msf.second = d9;
-
-	d10 = get_data(0);
-	if (d10 < 0)
-		return d10;
-	qp->cdsc_absaddr.msf.frame = d10;
-
-	DEBUG((DEBUG_TOC, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
-		d1, d2, d3, d4, d5, d6, d7, d8, d9, d10));
-
-	msf_bcd2bin(&qp->cdsc_absaddr);
-	msf_bcd2bin(&qp->cdsc_reladdr);
-	if (qp->cdsc_format == CDROM_LBA) {
-		msf2lba(&qp->cdsc_absaddr);
-		msf2lba(&qp->cdsc_reladdr);
-	}
-
-	return 0;
-}
-
-/* Table of contents handling */
-
-
-/* Errors in table of contents */
-#define ERR_TOC_MISSINGINFO	0x120
-#define ERR_TOC_MISSINGENTRY	0x121
-
-
-struct cdrom_disk_info {
-	unsigned char		first;
-	unsigned char		last;
-	struct cdrom_msf0	disk_length;
-	struct cdrom_msf0	first_track;
-	/* Multisession info: */
-	unsigned char		next;
-	struct cdrom_msf0	next_session;
-	struct cdrom_msf0	last_session;
-	unsigned char		multi;
-	unsigned char		xa;
-	unsigned char		audio;
-};
-static struct cdrom_disk_info disk_info;
-
-#define MAX_TRACKS		111
-static struct cdrom_subchnl toc[MAX_TRACKS];
-
-#define QINFO_FIRSTTRACK	100 /* bcd2bin(0xa0) */
-#define QINFO_LASTTRACK		101 /* bcd2bin(0xa1) */
-#define QINFO_DISKLENGTH	102 /* bcd2bin(0xa2) */
-#define QINFO_NEXTSESSION	110 /* bcd2bin(0xb0) */
-
-#define I_FIRSTTRACK	0x01
-#define I_LASTTRACK	0x02
-#define I_DISKLENGTH	0x04
-#define I_NEXTSESSION	0x08
-#define I_ALL	(I_FIRSTTRACK | I_LASTTRACK | I_DISKLENGTH)
-
-
-#if DEBUG_TOC
-static void toc_debug_info(int i)
-{
-	printk(KERN_DEBUG "#%3d ctl %1x, adr %1x, track %2d index %3d"
-		"  %2d:%02d.%02d %2d:%02d.%02d\n",
-		i, toc[i].cdsc_ctrl, toc[i].cdsc_adr,
-		toc[i].cdsc_trk, toc[i].cdsc_ind,
-		toc[i].cdsc_reladdr.msf.minute,
-		toc[i].cdsc_reladdr.msf.second,
-		toc[i].cdsc_reladdr.msf.frame,
-		toc[i].cdsc_absaddr.msf.minute,
-		toc[i].cdsc_absaddr.msf.second,
-		toc[i].cdsc_absaddr.msf.frame);
-}
-#endif
-
-
-static int read_toc(void)
-{
-	int status, limit, count;
-	unsigned char got_info = 0;
-	struct cdrom_subchnl q_info;
-#if DEBUG_TOC
-	int i;
-#endif
-
-	DEBUG((DEBUG_TOC, "starting read_toc"));
-
-	count = 0;
-	for (limit = 60; limit > 0; limit--) {
-		int index;
-
-		q_info.cdsc_format = CDROM_MSF;
-		status = get_q_channel(&q_info);
-		if (status < 0)
-			return status;
-
-		index = q_info.cdsc_ind;
-		if (index > 0 && index < MAX_TRACKS
-		    && q_info.cdsc_trk == 0 && toc[index].cdsc_ind == 0) {
-			toc[index] = q_info;
-			DEBUG((DEBUG_TOC, "got %d", index));
-			if (index < 100)
-				count++;
-
-			switch (q_info.cdsc_ind) {
-			case QINFO_FIRSTTRACK:
-				got_info |= I_FIRSTTRACK;
-				break;
-			case QINFO_LASTTRACK:
-				got_info |= I_LASTTRACK;
-				break;
-			case QINFO_DISKLENGTH:
-				got_info |= I_DISKLENGTH;
-				break;
-			case QINFO_NEXTSESSION:
-				got_info |= I_NEXTSESSION;
-				break;
-			}
-		}
-
-		if ((got_info & I_ALL) == I_ALL
-		    && toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count
-		       >= toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1)
-			break;
-	}
-
-	/* Construct disk_info from TOC */
-	if (disk_info.first == 0) {
-		disk_info.first = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute;
-		disk_info.first_track.minute =
-			toc[disk_info.first].cdsc_absaddr.msf.minute;
-		disk_info.first_track.second =
-			toc[disk_info.first].cdsc_absaddr.msf.second;
-		disk_info.first_track.frame =
-			toc[disk_info.first].cdsc_absaddr.msf.frame;
-	}
-	disk_info.last = toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute;
-	disk_info.disk_length.minute =
-			toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.minute;
-	disk_info.disk_length.second =
-			toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.second-2;
-	disk_info.disk_length.frame =
-			toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.frame;
-	disk_info.next_session.minute =
-			toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.minute;
-	disk_info.next_session.second =
-			toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.second;
-	disk_info.next_session.frame =
-			toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.frame;
-	disk_info.next = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute;
-	disk_info.last_session.minute =
-			toc[disk_info.next].cdsc_absaddr.msf.minute;
-	disk_info.last_session.second =
-			toc[disk_info.next].cdsc_absaddr.msf.second;
-	disk_info.last_session.frame =
-			toc[disk_info.next].cdsc_absaddr.msf.frame;
-	toc[disk_info.last + 1].cdsc_absaddr.msf.minute =
-			disk_info.disk_length.minute;
-	toc[disk_info.last + 1].cdsc_absaddr.msf.second =
-			disk_info.disk_length.second;
-	toc[disk_info.last + 1].cdsc_absaddr.msf.frame =
-			disk_info.disk_length.frame;
-#if DEBUG_TOC
-	for (i = 1; i <= disk_info.last + 1; i++)
-		toc_debug_info(i);
-	toc_debug_info(QINFO_FIRSTTRACK);
-	toc_debug_info(QINFO_LASTTRACK);
-	toc_debug_info(QINFO_DISKLENGTH);
-	toc_debug_info(QINFO_NEXTSESSION);
-#endif
-
-	DEBUG((DEBUG_TOC, "exiting read_toc, got_info %x, count %d",
-		got_info, count));
-	if ((got_info & I_ALL) != I_ALL
-	    || toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count
-	       < toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1)
-		return -ERR_TOC_MISSINGINFO;
-	return 0;
-}
-
-
-#ifdef MULTISESSION
-static int get_multi_disk_info(void)
-{
-	int sessions, status;
-	struct cdrom_msf multi_index;
-
-
-	for (sessions = 2; sessions < 10 /* %%for now */; sessions++) {
-		int count;
-
-		for (count = 100; count < MAX_TRACKS; count++) 
-			toc[count].cdsc_ind = 0;
-
-		multi_index.cdmsf_min0 = disk_info.next_session.minute;
-		multi_index.cdmsf_sec0 = disk_info.next_session.second;
-		multi_index.cdmsf_frame0 = disk_info.next_session.frame;
-		if (multi_index.cdmsf_sec0 >= 20)
-			multi_index.cdmsf_sec0 -= 20;
-		else {
-			multi_index.cdmsf_sec0 += 40;
-			multi_index.cdmsf_min0--;
-		}
-		DEBUG((DEBUG_MULTIS, "Try %d: %2d:%02d.%02d", sessions,
-			multi_index.cdmsf_min0,
-			multi_index.cdmsf_sec0,
-			multi_index.cdmsf_frame0));
-		bin2bcd(&multi_index);
-		multi_index.cdmsf_min1 = 0;
-		multi_index.cdmsf_sec1 = 0;
-		multi_index.cdmsf_frame1 = 1;
-
-		status = exec_read_cmd(COMREAD, &multi_index);
-		if (status < 0) {
-			DEBUG((DEBUG_TOC, "exec_read_cmd COMREAD: %02x",
-				-status));
-			break;
-		}
-		status = sleep_flag_low(FL_DTEN, MULTI_SEEK_TIMEOUT) ?
-				0 : -ERR_TOC_MISSINGINFO;
-		flush_data();
-		if (status < 0) {
-			DEBUG((DEBUG_TOC, "sleep_flag_low: %02x", -status));
-			break;
-		}
-
-		status = read_toc();
-		if (status < 0) {
-			DEBUG((DEBUG_TOC, "read_toc: %02x", -status));
-			break;
-		}
-
-		disk_info.multi = 1;
-	}
-
-	exec_cmd(COMSTOP);
-
-	if (status < 0)
-		return -EIO;
-	return 0;
-}
-#endif /* MULTISESSION */
-
-
-static int update_toc(void)
-{
-	int status, count;
-
-	if (toc_uptodate)
-		return 0;
-
-	DEBUG((DEBUG_TOC, "starting update_toc"));
-
-	disk_info.first = 0;
-	for (count = 0; count < MAX_TRACKS; count++) 
-		toc[count].cdsc_ind = 0;
-
-	status = exec_cmd(COMLEADIN);
-	if (status < 0)
-		return -EIO;
-
-	status = read_toc();
-	if (status < 0) {
-		DEBUG((DEBUG_TOC, "read_toc: %02x", -status));
-		return -EIO;
-	}
-
-        /* Audio disk detection. Look at first track. */
-	disk_info.audio =
-		(toc[disk_info.first].cdsc_ctrl & CDROM_DATA_TRACK) ? 0 : 1;
-
-	/* XA detection */
-	disk_info.xa = drive_status() & ST_MODE2TRACK;
-
-	/* Multisession detection: if we want this, define MULTISESSION */
-	disk_info.multi = 0;
-#ifdef MULTISESSION
- 	if (disk_info.xa)
-		get_multi_disk_info();	/* Here disk_info.multi is set */
-#endif /* MULTISESSION */
-	if (disk_info.multi)
-		printk(KERN_WARNING "optcd: Multisession support experimental, "
-			"see Documentation/cdrom/optcd\n");
-
-	DEBUG((DEBUG_TOC, "exiting update_toc"));
-
-	toc_uptodate = 1;
-	return 0;
-}
-
-/* Request handling */
-
-static int current_valid(void)
-{
-        return CURRENT &&
-		CURRENT->cmd == READ &&
-		CURRENT->sector != -1;
-}
-
-/* Buffers for block size conversion. */
-#define NOBUF		-1
-
-static char buf[CD_FRAMESIZE * N_BUFS];
-static volatile int buf_bn[N_BUFS], next_bn;
-static volatile int buf_in = 0, buf_out = NOBUF;
-
-static inline void opt_invalidate_buffers(void)
-{
-	int i;
-
-	DEBUG((DEBUG_BUFFERS, "executing opt_invalidate_buffers"));
-
-	for (i = 0; i < N_BUFS; i++)
-		buf_bn[i] = NOBUF;
-	buf_out = NOBUF;
-}
-
-
-/* Take care of the different block sizes between cdrom and Linux.
-   When Linux gets variable block sizes this will probably go away. */
-static void transfer(void)
-{
-#if DEBUG_BUFFERS | DEBUG_REQUEST
-	printk(KERN_DEBUG "optcd: executing transfer\n");
-#endif
-
-	if (!current_valid())
-		return;
-	while (CURRENT -> nr_sectors) {
-		int bn = CURRENT -> sector / 4;
-		int i, offs, nr_sectors;
-		for (i = 0; i < N_BUFS && buf_bn[i] != bn; ++i);
-
-		DEBUG((DEBUG_REQUEST, "found %d", i));
-
-		if (i >= N_BUFS) {
-			buf_out = NOBUF;
-			break;
-		}
-
-		offs = (i * 4 + (CURRENT -> sector & 3)) * 512;
-		nr_sectors = 4 - (CURRENT -> sector & 3);
-
-		if (buf_out != i) {
-			buf_out = i;
-			if (buf_bn[i] != bn) {
-				buf_out = NOBUF;
-				continue;
-			}
-		}
-
-		if (nr_sectors > CURRENT -> nr_sectors)
-			nr_sectors = CURRENT -> nr_sectors;
-		memcpy(CURRENT -> buffer, buf + offs, nr_sectors * 512);
-		CURRENT -> nr_sectors -= nr_sectors;
-		CURRENT -> sector += nr_sectors;
-		CURRENT -> buffer += nr_sectors * 512;
-	}
-}
-
-
-/* State machine for reading disk blocks */
-
-enum state_e {
-	S_IDLE,		/* 0 */
-	S_START,	/* 1 */
-	S_READ,		/* 2 */
-	S_DATA,		/* 3 */
-	S_STOP,		/* 4 */
-	S_STOPPING	/* 5 */
-};
-
-static volatile enum state_e state = S_IDLE;
-#if DEBUG_STATE
-static volatile enum state_e state_old = S_STOP;
-static volatile int flags_old = 0;
-static volatile long state_n = 0;
-#endif
-
-
-/* Used as mutex to keep do_optcd_request (and other processes calling
-   ioctl) out while some process is inside a VFS call.
-   Reverse is accomplished by checking if state = S_IDLE upon entry
-   of opt_ioctl and opt_media_change. */
-static int in_vfs = 0;
-
-
-static volatile int transfer_is_active = 0;
-static volatile int error = 0;	/* %% do something with this?? */
-static int tries;		/* ibid?? */
-static int timeout = 0;
-
-static void poll(unsigned long data);
-static struct timer_list req_timer = {.function = poll};
-
-
-static void poll(unsigned long data)
-{
-	static volatile int read_count = 1;
-	int flags;
-	int loop_again = 1;
-	int status = 0;
-	int skip = 0;
-
-	if (error) {
-		printk(KERN_ERR "optcd: I/O error 0x%02x\n", error);
-		opt_invalidate_buffers();
-		if (!tries--) {
-			printk(KERN_ERR "optcd: read block %d failed;"
-				" Giving up\n", next_bn);
-			if (transfer_is_active)
-				loop_again = 0;
-			if (current_valid())
-				end_request(CURRENT, 0);
-			tries = 5;
-		}
-		error = 0;
-		state = S_STOP;
-	}
-
-	while (loop_again)
-	{
-		loop_again = 0; /* each case must flip this back to 1 if we want
-		                 to come back up here */
-
-#if DEBUG_STATE
-		if (state == state_old)
-			state_n++;
-		else {
-			state_old = state;
-			if (++state_n > 1)
-				printk(KERN_DEBUG "optcd: %ld times "
-					"in previous state\n", state_n);
-			printk(KERN_DEBUG "optcd: state %d\n", state);
-			state_n = 0;
-		}
-#endif
-
-		switch (state) {
-		case S_IDLE:
-			return;
-		case S_START:
-			if (in_vfs)
-				break;
-			if (send_cmd(COMDRVST)) {
-				state = S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-			state = S_READ;
-			timeout = READ_TIMEOUT;
-			break;
-		case S_READ: {
-			struct cdrom_msf msf;
-			if (!skip) {
-				status = fetch_status();
-				if (status < 0)
-					break;
-				if (status & ST_DSK_CHG) {
-					toc_uptodate = 0;
-					opt_invalidate_buffers();
-				}
-			}
-			skip = 0;
-			if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) {
-				toc_uptodate = 0;
-				opt_invalidate_buffers();
-				printk(KERN_WARNING "optcd: %s\n",
-					(status & ST_DOOR_OPEN)
-					? "door open"
-					: "disk removed");
-				state = S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-			if (!current_valid()) {
-				state = S_STOP;
-				loop_again = 1;
-				break;
-			}
-			next_bn = CURRENT -> sector / 4;
-			lba2msf(next_bn, &msf);
-			read_count = N_BUFS;
-			msf.cdmsf_frame1 = read_count; /* Not BCD! */
-
-			DEBUG((DEBUG_REQUEST, "reading %x:%x.%x %x:%x.%x",
-				msf.cdmsf_min0,
-				msf.cdmsf_sec0,
-				msf.cdmsf_frame0,
-				msf.cdmsf_min1,
-				msf.cdmsf_sec1,
-				msf.cdmsf_frame1));
-			DEBUG((DEBUG_REQUEST, "next_bn:%d buf_in:%d"
-				" buf_out:%d buf_bn:%d",
-				next_bn,
-				buf_in,
-				buf_out,
-				buf_bn[buf_in]));
-
-			exec_read_cmd(COMREAD, &msf);
-			state = S_DATA;
-			timeout = READ_TIMEOUT;
-			break;
-		}
-		case S_DATA:
-			flags = stdt_flags() & (FL_STEN|FL_DTEN);
-
-#if DEBUG_STATE
-			if (flags != flags_old) {
-				flags_old = flags;
-				printk(KERN_DEBUG "optcd: flags:%x\n", flags);
-			}
-			if (flags == FL_STEN)
-				printk(KERN_DEBUG "timeout cnt: %d\n", timeout);
-#endif
-
-			switch (flags) {
-			case FL_DTEN:		/* only STEN low */
-				if (!tries--) {
-					printk(KERN_ERR
-						"optcd: read block %d failed; "
-						"Giving up\n", next_bn);
-					if (transfer_is_active) {
-						tries = 0;
-						break;
-					}
-					if (current_valid())
-						end_request(CURRENT, 0);
-					tries = 5;
-				}
-				state = S_START;
-				timeout = READ_TIMEOUT;
-				loop_again = 1;
-			case (FL_STEN|FL_DTEN):	 /* both high */
-				break;
-			default:	/* DTEN low */
-				tries = 5;
-				if (!current_valid() && buf_in == buf_out) {
-					state = S_STOP;
-					loop_again = 1;
-					break;
-				}
-				if (read_count<=0)
-					printk(KERN_WARNING
-						"optcd: warning - try to read"
-						" 0 frames\n");
-				while (read_count) {
-					buf_bn[buf_in] = NOBUF;
-					if (!flag_low(FL_DTEN, BUSY_TIMEOUT)) {
-					/* should be no waiting here!?? */
-						printk(KERN_ERR
-						   "read_count:%d "
-						   "CURRENT->nr_sectors:%ld "
-						   "buf_in:%d\n",
-							read_count,
-							CURRENT->nr_sectors,
-							buf_in);
-						printk(KERN_ERR
-							"transfer active: %x\n",
-							transfer_is_active);
-						read_count = 0;
-						state = S_STOP;
-						loop_again = 1;
-						end_request(CURRENT, 0);
-						break;
-					}
-					fetch_data(buf+
-					    CD_FRAMESIZE*buf_in,
-					    CD_FRAMESIZE);
-					read_count--;
-
-					DEBUG((DEBUG_REQUEST,
-						"S_DATA; ---I've read data- "
-						"read_count: %d",
-						read_count));
-					DEBUG((DEBUG_REQUEST,
-						"next_bn:%d  buf_in:%d "
-						"buf_out:%d  buf_bn:%d",
-						next_bn,
-						buf_in,
-						buf_out,
-						buf_bn[buf_in]));
-
-					buf_bn[buf_in] = next_bn++;
-					if (buf_out == NOBUF)
-						buf_out = buf_in;
-					buf_in = buf_in + 1 ==
-						N_BUFS ? 0 : buf_in + 1;
-				}
-				if (!transfer_is_active) {
-					while (current_valid()) {
-						transfer();
-						if (CURRENT -> nr_sectors == 0)
-							end_request(CURRENT, 1);
-						else
-							break;
-					}
-				}
-
-				if (current_valid()
-				    && (CURRENT -> sector / 4 < next_bn ||
-				    CURRENT -> sector / 4 >
-				     next_bn + N_BUFS)) {
-					state = S_STOP;
-					loop_again = 1;
-					break;
-				}
-				timeout = READ_TIMEOUT;
-				if (read_count == 0) {
-					state = S_STOP;
-					loop_again = 1;
-					break;
-				}
-			}
-			break;
-		case S_STOP:
-			if (read_count != 0)
-				printk(KERN_ERR
-					"optcd: discard data=%x frames\n",
-					read_count);
-			flush_data();
-			if (send_cmd(COMDRVST)) {
-				state = S_IDLE;
-				while (current_valid())
-					end_request(CURRENT, 0);
-				return;
-			}
-			state = S_STOPPING;
-			timeout = STOP_TIMEOUT;
-			break;
-		case S_STOPPING:
-			status = fetch_status();
-			if (status < 0 && timeout)
-					break;
-			if ((status >= 0) && (status & ST_DSK_CHG)) {
-				toc_uptodate = 0;
-				opt_invalidate_buffers();
-			}
-			if (current_valid()) {
-				if (status >= 0) {
-					state = S_READ;
-					loop_again = 1;
-					skip = 1;
-					break;
-				} else {
-					state = S_START;
-					timeout = 1;
-				}
-			} else {
-				state = S_IDLE;
-				return;
-			}
-			break;
-		default:
-			printk(KERN_ERR "optcd: invalid state %d\n", state);
-			return;
-		} /* case */
-	} /* while */
-
-	if (!timeout--) {
-		printk(KERN_ERR "optcd: timeout in state %d\n", state);
-		state = S_STOP;
-		if (exec_cmd(COMSTOP) < 0) {
-			state = S_IDLE;
-			while (current_valid())
-				end_request(CURRENT, 0);
-			return;
-		}
-	}
-
-	mod_timer(&req_timer, jiffies + HZ/100);
-}
-
-
-static void do_optcd_request(request_queue_t * q)
-{
-	DEBUG((DEBUG_REQUEST, "do_optcd_request(%ld+%ld)",
-	       CURRENT -> sector, CURRENT -> nr_sectors));
-
-	if (disk_info.audio) {
-		printk(KERN_WARNING "optcd: tried to mount an Audio CD\n");
-		end_request(CURRENT, 0);
-		return;
-	}
-
-	transfer_is_active = 1;
-	while (current_valid()) {
-		transfer();	/* First try to transfer block from buffers */
-		if (CURRENT -> nr_sectors == 0) {
-			end_request(CURRENT, 1);
-		} else {	/* Want to read a block not in buffer */
-			buf_out = NOBUF;
-			if (state == S_IDLE) {
-				/* %% Should this block the request queue?? */
-				if (update_toc() < 0) {
-					while (current_valid())
-						end_request(CURRENT, 0);
-					break;
-				}
-				/* Start state machine */
-				state = S_START;
-				timeout = READ_TIMEOUT;
-				tries = 5;
-				/* %% why not start right away?? */
-				mod_timer(&req_timer, jiffies + HZ/100);
-			}
-			break;
-		}
-	}
-	transfer_is_active = 0;
-
-	DEBUG((DEBUG_REQUEST, "next_bn:%d  buf_in:%d buf_out:%d  buf_bn:%d",
-	       next_bn, buf_in, buf_out, buf_bn[buf_in]));
-	DEBUG((DEBUG_REQUEST, "do_optcd_request ends"));
-}
-
-/* IOCTLs */
-
-
-static char auto_eject = 0;
-
-static int cdrompause(void)
-{
-	int status;
-
-	if (audio_status != CDROM_AUDIO_PLAY)
-		return -EINVAL;
-
-	status = exec_cmd(COMPAUSEON);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEON: %02x", -status));
-		return -EIO;
-	}
-	audio_status = CDROM_AUDIO_PAUSED;
-	return 0;
-}
-
-
-static int cdromresume(void)
-{
-	int status;
-
-	if (audio_status != CDROM_AUDIO_PAUSED)
-		return -EINVAL;
-
-	status = exec_cmd(COMPAUSEOFF);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEOFF: %02x", -status));
-		audio_status = CDROM_AUDIO_ERROR;
-		return -EIO;
-	}
-	audio_status = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-
-static int cdromplaymsf(void __user *arg)
-{
-	int status;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&msf, arg, sizeof msf))
-		return -EFAULT;
-
-	bin2bcd(&msf);
-	status = exec_long_cmd(COMPLAY, &msf);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status));
-		audio_status = CDROM_AUDIO_ERROR;
-		return -EIO;
-	}
-
-	audio_status = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-
-static int cdromplaytrkind(void __user *arg)
-{
-	int status;
-	struct cdrom_ti ti;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&ti, arg, sizeof ti))
-		return -EFAULT;
-
-	if (ti.cdti_trk0 < disk_info.first
-	    || ti.cdti_trk0 > disk_info.last
-	    || ti.cdti_trk1 < ti.cdti_trk0)
-		return -EINVAL;
-	if (ti.cdti_trk1 > disk_info.last)
-		ti.cdti_trk1 = disk_info.last;
-
-	msf.cdmsf_min0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.minute;
-	msf.cdmsf_sec0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.second;
-	msf.cdmsf_frame0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.frame;
-	msf.cdmsf_min1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.minute;
-	msf.cdmsf_sec1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.second;
-	msf.cdmsf_frame1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.frame;
-
-	DEBUG((DEBUG_VFS, "play %02d:%02d.%02d to %02d:%02d.%02d",
-		msf.cdmsf_min0,
-		msf.cdmsf_sec0,
-		msf.cdmsf_frame0,
-		msf.cdmsf_min1,
-		msf.cdmsf_sec1,
-		msf.cdmsf_frame1));
-
-	bin2bcd(&msf);
-	status = exec_long_cmd(COMPLAY, &msf);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status));
-		audio_status = CDROM_AUDIO_ERROR;
-		return -EIO;
-	}
-
-	audio_status = CDROM_AUDIO_PLAY;
-	return 0;
-}
-
-
-static int cdromreadtochdr(void __user *arg)
-{
-	struct cdrom_tochdr tochdr;
-
-	tochdr.cdth_trk0 = disk_info.first;
-	tochdr.cdth_trk1 = disk_info.last;
-
-	return copy_to_user(arg, &tochdr, sizeof tochdr) ? -EFAULT : 0;
-}
-
-
-static int cdromreadtocentry(void __user *arg)
-{
-	struct cdrom_tocentry entry;
-	struct cdrom_subchnl *tocptr;
-
-	if (copy_from_user(&entry, arg, sizeof entry))
-		return -EFAULT;
-
-	if (entry.cdte_track == CDROM_LEADOUT)
-		tocptr = &toc[disk_info.last + 1];
-	else if (entry.cdte_track > disk_info.last
-		|| entry.cdte_track < disk_info.first)
-		return -EINVAL;
-	else
-		tocptr = &toc[entry.cdte_track];
-
-	entry.cdte_adr = tocptr->cdsc_adr;
-	entry.cdte_ctrl = tocptr->cdsc_ctrl;
-	entry.cdte_addr.msf.minute = tocptr->cdsc_absaddr.msf.minute;
-	entry.cdte_addr.msf.second = tocptr->cdsc_absaddr.msf.second;
-	entry.cdte_addr.msf.frame = tocptr->cdsc_absaddr.msf.frame;
-	/* %% What should go into entry.cdte_datamode? */
-
-	if (entry.cdte_format == CDROM_LBA)
-		msf2lba(&entry.cdte_addr);
-	else if (entry.cdte_format != CDROM_MSF)
-		return -EINVAL;
-
-	return copy_to_user(arg, &entry, sizeof entry) ? -EFAULT : 0;
-}
-
-
-static int cdromvolctrl(void __user *arg)
-{
-	int status;
-	struct cdrom_volctrl volctrl;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&volctrl, arg, sizeof volctrl))
-		return -EFAULT;
-
-	msf.cdmsf_min0 = 0x10;
-	msf.cdmsf_sec0 = 0x32;
-	msf.cdmsf_frame0 = volctrl.channel0;
-	msf.cdmsf_min1 = volctrl.channel1;
-	msf.cdmsf_sec1 = volctrl.channel2;
-	msf.cdmsf_frame1 = volctrl.channel3;
-
-	status = exec_long_cmd(COMCHCTRL, &msf);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_long_cmd COMCHCTRL: %02x", -status));
-		return -EIO;
-	}
-	return 0;
-}
-
-
-static int cdromsubchnl(void __user *arg)
-{
-	int status;
-	struct cdrom_subchnl subchnl;
-
-	if (copy_from_user(&subchnl, arg, sizeof subchnl))
-		return -EFAULT;
-
-	if (subchnl.cdsc_format != CDROM_LBA
-	    && subchnl.cdsc_format != CDROM_MSF)
-		return -EINVAL;
-
-	status = get_q_channel(&subchnl);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "get_q_channel: %02x", -status));
-		return -EIO;
-	}
-
-	if (copy_to_user(arg, &subchnl, sizeof subchnl))
-		return -EFAULT;
-	return 0;
-}
-
-
-static struct gendisk *optcd_disk;
-
-
-static int cdromread(void __user *arg, int blocksize, int cmd)
-{
-	int status;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&msf, arg, sizeof msf))
-		return -EFAULT;
-
-	bin2bcd(&msf);
-	msf.cdmsf_min1 = 0;
-	msf.cdmsf_sec1 = 0;
-	msf.cdmsf_frame1 = 1;	/* read only one frame */
-	status = exec_read_cmd(cmd, &msf);
-
-	DEBUG((DEBUG_VFS, "read cmd status 0x%x", status));
-
-	if (!sleep_flag_low(FL_DTEN, SLEEP_TIMEOUT))
-		return -EIO;
-
-	fetch_data(optcd_disk->private_data, blocksize);
-
-	if (copy_to_user(arg, optcd_disk->private_data, blocksize))
-		return -EFAULT;
-
-	return 0;
-}
-
-
-static int cdromseek(void __user *arg)
-{
-	int status;
-	struct cdrom_msf msf;
-
-	if (copy_from_user(&msf, arg, sizeof msf))
-		return -EFAULT;
-
-	bin2bcd(&msf);
-	status = exec_seek_cmd(COMSEEK, &msf);
-
-	DEBUG((DEBUG_VFS, "COMSEEK status 0x%x", status));
-
-	if (status < 0)
-		return -EIO;
-	return 0;
-}
-
-
-#ifdef MULTISESSION
-static int cdrommultisession(void __user *arg)
-{
-	struct cdrom_multisession ms;
-
-	if (copy_from_user(&ms, arg, sizeof ms))
-		return -EFAULT;
-
-	ms.addr.msf.minute = disk_info.last_session.minute;
-	ms.addr.msf.second = disk_info.last_session.second;
-	ms.addr.msf.frame = disk_info.last_session.frame;
-
-	if (ms.addr_format != CDROM_LBA
-	   && ms.addr_format != CDROM_MSF)
-		return -EINVAL;
-	if (ms.addr_format == CDROM_LBA)
-		msf2lba(&ms.addr);
-
-	ms.xa_flag = disk_info.xa;
-
-  	if (copy_to_user(arg, &ms, sizeof(struct cdrom_multisession)))
-		return -EFAULT;
-
-#if DEBUG_MULTIS
- 	if (ms.addr_format == CDROM_MSF)
-               	printk(KERN_DEBUG
-			"optcd: multisession xa:%d, msf:%02d:%02d.%02d\n",
-			ms.xa_flag,
-			ms.addr.msf.minute,
-			ms.addr.msf.second,
-			ms.addr.msf.frame);
-	else
-		printk(KERN_DEBUG
-		    "optcd: multisession %d, lba:0x%08x [%02d:%02d.%02d])\n",
-			ms.xa_flag,
-			ms.addr.lba,
-			disk_info.last_session.minute,
-			disk_info.last_session.second,
-			disk_info.last_session.frame);
-#endif /* DEBUG_MULTIS */
-
-	return 0;
-}
-#endif /* MULTISESSION */
-
-
-static int cdromreset(void)
-{
-	if (state != S_IDLE) {
-		error = 1;
-		tries = 0;
-	}
-
-	toc_uptodate = 0;
-	disk_changed = 1;
-	opt_invalidate_buffers();
-	audio_status = CDROM_AUDIO_NO_STATUS;
-
-	if (!reset_drive())
-		return -EIO;
-	return 0;
-}
-
-/* VFS calls */
-
-
-static int opt_ioctl(struct inode *ip, struct file *fp,
-                     unsigned int cmd, unsigned long arg)
-{
-	int status, err, retval = 0;
-	void __user *argp = (void __user *)arg;
-
-	DEBUG((DEBUG_VFS, "starting opt_ioctl"));
-
-	if (!ip)
-		return -EINVAL;
-
-	if (cmd == CDROMRESET)
-		return cdromreset();
-
-	/* is do_optcd_request or another ioctl busy? */
-	if (state != S_IDLE || in_vfs)
-		return -EBUSY;
-
-	in_vfs = 1;
-
-	status = drive_status();
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "drive_status: %02x", -status));
-		in_vfs = 0;
-		return -EIO;
-	}
-
-	if (status & ST_DOOR_OPEN)
-		switch (cmd) {	/* Actions that can be taken with door open */
-		case CDROMCLOSETRAY:
-			/* We do this before trying to read the toc. */
-			err = exec_cmd(COMCLOSE);
-			if (err < 0) {
-				DEBUG((DEBUG_VFS,
-				       "exec_cmd COMCLOSE: %02x", -err));
-				in_vfs = 0;
-				return -EIO;
-			}
-			break;
-		default:	in_vfs = 0;
-				return -EBUSY;
-		}
-
-	err = update_toc();
-	if (err < 0) {
-		DEBUG((DEBUG_VFS, "update_toc: %02x", -err));
-		in_vfs = 0;
-		return -EIO;
-	}
-
-	DEBUG((DEBUG_VFS, "ioctl cmd 0x%x", cmd));
-
-	switch (cmd) {
-	case CDROMPAUSE:	retval = cdrompause(); break;
-	case CDROMRESUME:	retval = cdromresume(); break;
-	case CDROMPLAYMSF:	retval = cdromplaymsf(argp); break;
-	case CDROMPLAYTRKIND:	retval = cdromplaytrkind(argp); break;
-	case CDROMREADTOCHDR:	retval = cdromreadtochdr(argp); break;
-	case CDROMREADTOCENTRY:	retval = cdromreadtocentry(argp); break;
-
-	case CDROMSTOP:		err = exec_cmd(COMSTOP);
-				if (err < 0) {
-					DEBUG((DEBUG_VFS,
-						"exec_cmd COMSTOP: %02x",
-						-err));
-					retval = -EIO;
-				} else
-					audio_status = CDROM_AUDIO_NO_STATUS;
-				break;
-	case CDROMSTART:	break;	/* This is a no-op */
-	case CDROMEJECT:	err = exec_cmd(COMUNLOCK);
-				if (err < 0) {
-					DEBUG((DEBUG_VFS,
-						"exec_cmd COMUNLOCK: %02x",
-						-err));
-					retval = -EIO;
-					break;
-				}
-				err = exec_cmd(COMOPEN);
-				if (err < 0) {
-					DEBUG((DEBUG_VFS,
-						"exec_cmd COMOPEN: %02x",
-						-err));
-					retval = -EIO;
-				}
-				break;
-
-	case CDROMVOLCTRL:	retval = cdromvolctrl(argp); break;
-	case CDROMSUBCHNL:	retval = cdromsubchnl(argp); break;
-
-	/* The drive detects the mode and automatically delivers the
-	   correct 2048 bytes, so we don't need these IOCTLs */
-	case CDROMREADMODE2:	retval = -EINVAL; break;
-	case CDROMREADMODE1:	retval = -EINVAL; break;
-
-	/* Drive doesn't support reading audio */
-	case CDROMREADAUDIO:	retval = -EINVAL; break;
-
-	case CDROMEJECT_SW:	auto_eject = (char) arg;
-				break;
-
-#ifdef MULTISESSION
-	case CDROMMULTISESSION:	retval = cdrommultisession(argp); break;
-#endif
-
-	case CDROM_GET_MCN:	retval = -EINVAL; break; /* not implemented */
-	case CDROMVOLREAD:	retval = -EINVAL; break; /* not implemented */
-
-	case CDROMREADRAW:
-			/* this drive delivers 2340 bytes in raw mode */
-			retval = cdromread(argp, CD_FRAMESIZE_RAW1, COMREADRAW);
-			break;
-	case CDROMREADCOOKED:
-			retval = cdromread(argp, CD_FRAMESIZE, COMREAD);
-			break;
-	case CDROMREADALL:
-			retval = cdromread(argp, CD_FRAMESIZE_RAWER, COMREADALL);
-			break;
-
-	case CDROMSEEK:		retval = cdromseek(argp); break;
-	case CDROMPLAYBLK:	retval = -EINVAL; break; /* not implemented */
-	case CDROMCLOSETRAY:	break;	/* The action was taken earlier */
-	default:		retval = -EINVAL;
-	}
-	in_vfs = 0;
-	return retval;
-}
-
-
-static int open_count = 0;
-
-/* Open device special file; check that a disk is in. */
-static int opt_open(struct inode *ip, struct file *fp)
-{
-	DEBUG((DEBUG_VFS, "starting opt_open"));
-
-	if (!open_count && state == S_IDLE) {
-		int status;
-		char *buf;
-
-		buf = kmalloc(CD_FRAMESIZE_RAWER, GFP_KERNEL);
-		if (!buf) {
-			printk(KERN_INFO "optcd: cannot allocate read buffer\n");
-			return -ENOMEM;
-		}
-		optcd_disk->private_data = buf;		/* save read buffer */
-
-		toc_uptodate = 0;
-		opt_invalidate_buffers();
-
-		status = exec_cmd(COMCLOSE);	/* close door */
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "exec_cmd COMCLOSE: %02x", -status));
-		}
-
-		status = drive_status();
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "drive_status: %02x", -status));
-			goto err_out;
-		}
-		DEBUG((DEBUG_VFS, "status: %02x", status));
-		if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) {
-			printk(KERN_INFO "optcd: no disk or door open\n");
-			goto err_out;
-		}
-		status = exec_cmd(COMLOCK);		/* Lock door */
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "exec_cmd COMLOCK: %02x", -status));
-		}
-		status = update_toc();	/* Read table of contents */
-		if (status < 0)	{
-			DEBUG((DEBUG_VFS, "update_toc: %02x", -status));
-	 		status = exec_cmd(COMUNLOCK);	/* Unlock door */
-			if (status < 0) {
-				DEBUG((DEBUG_VFS,
-				       "exec_cmd COMUNLOCK: %02x", -status));
-			}
-			goto err_out;
-		}
-		open_count++;
-	}
-
-	DEBUG((DEBUG_VFS, "exiting opt_open"));
-
-	return 0;
-
-err_out:
-	return -EIO;
-}
-
-
-/* Release device special file; flush all blocks from the buffer cache */
-static int opt_release(struct inode *ip, struct file *fp)
-{
-	int status;
-
-	DEBUG((DEBUG_VFS, "executing opt_release"));
-	DEBUG((DEBUG_VFS, "inode: %p, device: %s, file: %p\n",
-		ip, ip->i_bdev->bd_disk->disk_name, fp));
-
-	if (!--open_count) {
-		toc_uptodate = 0;
-		opt_invalidate_buffers();
-	 	status = exec_cmd(COMUNLOCK);	/* Unlock door */
-		if (status < 0) {
-			DEBUG((DEBUG_VFS, "exec_cmd COMUNLOCK: %02x", -status));
-		}
-		if (auto_eject) {
-			status = exec_cmd(COMOPEN);
-			DEBUG((DEBUG_VFS, "exec_cmd COMOPEN: %02x", -status));
-		}
-		kfree(optcd_disk->private_data);
-		del_timer(&delay_timer);
-		del_timer(&req_timer);
-	}
-	return 0;
-}
-
-
-/* Check if disk has been changed */
-static int opt_media_change(struct gendisk *disk)
-{
-	DEBUG((DEBUG_VFS, "executing opt_media_change"));
-	DEBUG((DEBUG_VFS, "dev: %s; disk_changed = %d\n",
-			disk->disk_name, disk_changed));
-
-	if (disk_changed) {
-		disk_changed = 0;
-		return 1;
-	}
-	return 0;
-}
-
-/* Driver initialisation */
-
-
-/* Returns 1 if a drive is detected with a version string
-   starting with "DOLPHIN". Otherwise 0. */
-static int __init version_ok(void)
-{
-	char devname[100];
-	int count, i, ch, status;
-
-	status = exec_cmd(COMVERSION);
-	if (status < 0) {
-		DEBUG((DEBUG_VFS, "exec_cmd COMVERSION: %02x", -status));
-		return 0;
-	}
-	if ((count = get_data(1)) < 0) {
-		DEBUG((DEBUG_VFS, "get_data(1): %02x", -count));
-		return 0;
-	}
-	for (i = 0, ch = -1; count > 0; count--) {
-		if ((ch = get_data(1)) < 0) {
-			DEBUG((DEBUG_VFS, "get_data(1): %02x", -ch));
-			break;
-		}
-		if (i < 99)
-			devname[i++] = ch;
-	}
-	devname[i] = '\0';
-	if (ch < 0)
-		return 0;
-
-	printk(KERN_INFO "optcd: Device %s detected\n", devname);
-	return ((devname[0] == 'D')
-	     && (devname[1] == 'O')
-	     && (devname[2] == 'L')
-	     && (devname[3] == 'P')
-	     && (devname[4] == 'H')
-	     && (devname[5] == 'I')
-	     && (devname[6] == 'N'));
-}
-
-
-static struct block_device_operations opt_fops = {
-	.owner		= THIS_MODULE,
-	.open		= opt_open,
-	.release	= opt_release,
-	.ioctl		= opt_ioctl,
-	.media_changed	= opt_media_change,
-};
-
-#ifndef MODULE
-/* Get kernel parameter when used as a kernel driver */
-static int optcd_setup(char *str)
-{
-	int ints[4];
-	(void)get_options(str, ARRAY_SIZE(ints), ints);
-	
-	if (ints[0] > 0)
-		optcd_port = ints[1];
-
- 	return 1;
-}
-
-__setup("optcd=", optcd_setup);
-
-#endif /* MODULE */
-
-/* Test for presence of drive and initialize it. Called at boot time
-   or during module initialisation. */
-static int __init optcd_init(void)
-{
-	int status;
-
-	if (optcd_port <= 0) {
-		printk(KERN_INFO
-			"optcd: no Optics Storage CDROM Initialization\n");
-		return -EIO;
-	}
-	optcd_disk = alloc_disk(1);
-	if (!optcd_disk) {
-		printk(KERN_ERR "optcd: can't allocate disk\n");
-		return -ENOMEM;
-	}
-	optcd_disk->major = MAJOR_NR;
-	optcd_disk->first_minor = 0;
-	optcd_disk->fops = &opt_fops;
-	sprintf(optcd_disk->disk_name, "optcd");
-
-	if (!request_region(optcd_port, 4, "optcd")) {
-		printk(KERN_ERR "optcd: conflict, I/O port 0x%x already used\n",
-			optcd_port);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-
-	if (!reset_drive()) {
-		printk(KERN_ERR "optcd: drive at 0x%x not ready\n", optcd_port);
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-	if (!version_ok()) {
-		printk(KERN_ERR "optcd: unknown drive detected; aborting\n");
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-	status = exec_cmd(COMINITDOUBLE);
-	if (status < 0) {
-		printk(KERN_ERR "optcd: cannot init double speed mode\n");
-		release_region(optcd_port, 4);
-		DEBUG((DEBUG_VFS, "exec_cmd COMINITDOUBLE: %02x", -status));
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-	if (register_blkdev(MAJOR_NR, "optcd")) {
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -EIO;
-	}
-
-
-	opt_queue = blk_init_queue(do_optcd_request, &optcd_lock);
-	if (!opt_queue) {
-		unregister_blkdev(MAJOR_NR, "optcd");
-		release_region(optcd_port, 4);
-		put_disk(optcd_disk);
-		return -ENOMEM;
-	}
-
-	blk_queue_hardsect_size(opt_queue, 2048);
-	optcd_disk->queue = opt_queue;
-	add_disk(optcd_disk);
-
-	printk(KERN_INFO "optcd: DOLPHIN 8000 AT CDROM at 0x%x\n", optcd_port);
-	return 0;
-}
-
-
-static void __exit optcd_exit(void)
-{
-	del_gendisk(optcd_disk);
-	put_disk(optcd_disk);
-	if (unregister_blkdev(MAJOR_NR, "optcd") == -EINVAL) {
-		printk(KERN_ERR "optcd: what's that: can't unregister\n");
-		return;
-	}
-	blk_cleanup_queue(opt_queue);
-	release_region(optcd_port, 4);
-	printk(KERN_INFO "optcd: module released.\n");
-}
-
-module_init(optcd_init);
-module_exit(optcd_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(OPTICS_CDROM_MAJOR);
diff --git a/drivers/cdrom/optcd.h b/drivers/cdrom/optcd.h
deleted file mode 100644
index 1911bb92ee28..000000000000
--- a/drivers/cdrom/optcd.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*	linux/include/linux/optcd.h - Optics Storage 8000 AT CDROM driver
-	$Id: optcd.h,v 1.2 1996/01/15 18:43:44 root Exp root $
-
-	Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl)
-
-
-	Configuration file for linux/drivers/cdrom/optcd.c
-*/
-
-#ifndef _LINUX_OPTCD_H
-#define _LINUX_OPTCD_H
-
-
-/* I/O base of drive. Drive uses base to base+2.
-   This setting can be overridden with the kernel or insmod command
-   line option 'optcd=<portbase>'. Use address of 0 to disable driver. */
-#define OPTCD_PORTBASE	0x340
-
-
-/* enable / disable parts of driver by define / undef */
-#define	MULTISESSION		/* multisession support (ALPHA) */
-
-
-/* Change 0 to 1 to debug various parts of the driver */
-#define	DEBUG_DRIVE_IF	0	/* Low level drive interface */
-#define	DEBUG_CONV	0	/* Address conversions */
-#define	DEBUG_BUFFERS	0	/* Buffering and block size conversion */
-#define	DEBUG_REQUEST	0	/* Request mechanism */
-#define	DEBUG_STATE	0	/* State machine */
-#define	DEBUG_TOC	0	/* Q-channel and Table of Contents */
-#define	DEBUG_MULTIS	0	/* Multisession code */
-#define	DEBUG_VFS	0	/* VFS interface */
-
-
-/* Don't touch these unless you know what you're doing. */
-
-/* Various timeout loop repetition counts. */
-#define BUSY_TIMEOUT		10000000	/* for busy wait */
-#define FAST_TIMEOUT		100000		/* ibid. for probing */
-#define SLEEP_TIMEOUT		6000		/* for timer wait */
-#define MULTI_SEEK_TIMEOUT	1000		/* for timer wait */
-#define READ_TIMEOUT		6000		/* for poll wait */
-#define STOP_TIMEOUT		2000		/* for poll wait */
-#define RESET_WAIT		5000		/* busy wait at drive reset */
-
-/* # of buffers for block size conversion. 6 is optimal for my setup (P75),
-   giving 280 kb/s, with 0.4% CPU usage. Experiment to find your optimal
-   setting */
-#define N_BUFS		6
-
-
-#endif /* _LINUX_OPTCD_H */
diff --git a/drivers/cdrom/sbpcd.c b/drivers/cdrom/sbpcd.c
deleted file mode 100644
index a1283b1ef989..000000000000
--- a/drivers/cdrom/sbpcd.c
+++ /dev/null
@@ -1,5966 +0,0 @@
-/*
- *  sbpcd.c   CD-ROM device driver for the whole family of traditional,
- *            non-ATAPI IDE-style Matsushita/Panasonic CR-5xx drives.
- *            Works with SoundBlaster compatible cards and with "no-sound"
- *            interface cards like Lasermate, Panasonic CI-101P, Teac, ...
- *            Also for the Longshine LCS-7260 drive.
- *            Also for the IBM "External ISA CD-Rom" drive.
- *            Also for the CreativeLabs CD200 drive.
- *            Also for the TEAC CD-55A drive.
- *            Also for the ECS-AT "Vertos 100" drive.
- *            Not for Sanyo drives (but for the H94A, sjcd is there...).
- *            Not for any other Funai drives than the CD200 types (sometimes
- *             labelled E2550UA or MK4015 or 2800F).
- */
-
-#define VERSION "v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000"
-
-/*   Copyright (C) 1993, 1994, 1995  Eberhard Moenkeberg <emoenke@gwdg.de>
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2, or (at your option)
- *   any later version.
- *
- *   You should have received a copy of the GNU General Public License
- *   (for example /usr/src/linux/COPYING); if not, write to the Free
- *   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *   If you change this software, you should mail a .diff file with some
- *   description lines to emoenke@gwdg.de. I want to know about it.
- *
- *   If you are the editor of a Linux CD, you should enable sbpcd.c within
- *   your boot floppy kernel and send me one of your CDs for free.
- *
- *   If you would like to port the driver to an other operating system (f.e.
- *   FreeBSD or NetBSD) or use it as an information source, you shall not be
- *   restricted by the GPL under the following conditions:
- *     a) the source code of your work is freely available
- *     b) my part of the work gets mentioned at all places where your 
- *        authorship gets mentioned
- *     c) I receive a copy of your code together with a full installation
- *        package of your operating system for free.
- *
- *
- *  VERSION HISTORY
- *
- *  0.1  initial release, April/May 93, after mcd.c (Martin Harriss)
- *
- *  0.2  thek "repeat:"-loop in do_sbpcd_request did not check for
- *       end-of-request_queue (resulting in kernel panic).
- *       Flow control seems stable, but throughput is not better.  
- *
- *  0.3  interrupt locking totally eliminated (maybe "inb" and "outb"
- *       are still locking) - 0.2 made keyboard-type-ahead losses.
- *       check_sbpcd_media_change added (to use by isofs/inode.c)
- *       - but it detects almost nothing.
- *
- *  0.4  use MAJOR 25 definitely.
- *       Almost total re-design to support double-speed drives and
- *       "naked" (no sound) interface cards ("LaserMate" interface type).
- *       Flow control should be exact now.
- *       Don't occupy the SbPro IRQ line (not needed either); will
- *       live together with Hannu Savolainen's sndkit now.
- *       Speeded up data transfer to 150 kB/sec, with help from Kai
- *       Makisara, the "provider" of the "mt" tape utility.
- *       Give "SpinUp" command if necessary.
- *       First steps to support up to 4 drives (but currently only one).
- *       Implemented audio capabilities - workman should work, xcdplayer
- *       gives some problems.
- *       This version is still consuming too much CPU time, and
- *       sleeping still has to be worked on.
- *       During "long" implied seeks, it seems possible that a 
- *       ReadStatus command gets ignored. That gives the message
- *       "ResponseStatus timed out" (happens about 6 times here during
- *       a "ls -alR" of the YGGDRASIL LGX-Beta CD). Such a case is
- *       handled without data error, but it should get done better.
- *
- *  0.5  Free CPU during waits (again with help from Kai Makisara).
- *       Made it work together with the LILO/kernel setup standard.
- *       Included auto-probing code, as suggested by YGGDRASIL.
- *       Formal redesign to add DDI debugging.
- *       There are still flaws in IOCTL (workman with double speed drive).
- *
- *  1.0  Added support for all drive IDs (0...3, no longer only 0)
- *       and up to 4 drives on one controller.
- *       Added "#define MANY_SESSION" for "old" multi session CDs.
- *
- *  1.1  Do SpinUp for new drives, too.
- *       Revised for clean compile under "old" kernels (0.99pl9).
- *
- *  1.2  Found the "workman with double-speed drive" bug: use the driver's
- *       audio_state, not what the drive is reporting with ReadSubQ.
- *
- *  1.3  Minor cleanups.
- *       Refinements regarding Workman.
- *
- *  1.4  Read XA disks (PhotoCDs) with "old" drives, too (but only the first
- *       session - no chance to fully access a "multi-session" CD).
- *       This currently still is too slow (50 kB/sec) - but possibly
- *       the old drives won't do it faster.
- *       Implemented "door (un)lock" for new drives (still does not work
- *       as wanted - no lock possible after an unlock).
- *       Added some debugging printout for the UPC/EAN code - but my drives 
- *       return only zeroes. Is there no UPC/EAN code written?
- *
- *  1.5  Laborate with UPC/EAN code (not better yet).
- *       Adapt to kernel 1.1.8 change (have to explicitly include
- *       <linux/string.h> now).
- *
- *  1.6  Trying to read audio frames as data. Impossible with the current
- *       drive firmware levels, as it seems. Awaiting any hint. ;-)
- *       Changed "door unlock": repeat it until success.
- *       Changed CDROMSTOP routine (stop somewhat "softer" so that Workman
- *       won't get confused).
- *       Added a third interface type: Sequoia S-1000, as used with the SPEA
- *       Media FX sound card. This interface (usable for Sony and Mitsumi 
- *       drives, too) needs a special configuration setup and behaves like a 
- *       LaserMate type after that. Still experimental - I do not have such
- *       an interface.
- *       Use the "variable BLOCK_SIZE" feature (2048). But it does only work
- *       if you give the mount option "block=2048".
- *       The media_check routine is currently disabled; now that it gets
- *       called as it should I fear it must get synchronized for not to
- *       disturb the normal driver's activity.
- *
- *  2.0  Version number bumped - two reasons:
- *       - reading audio tracks as data works now with CR-562 and CR-563. We
- *       currently do it by an IOCTL (yet has to get standardized), one frame
- *       at a time; that is pretty slow. But it works.
- *       - we are maintaining now up to 4 interfaces (each up to 4 drives):
- *       did it the easy way - a different MAJOR (25, 26, ...) and a different
- *       copy of the driver (sbpcd.c, sbpcd2.c, sbpcd3.c, sbpcd4.c - only
- *       distinguished by the value of SBPCD_ISSUE and the driver's name),
- *       and a common sbpcd.h file.
- *       Bettered the "ReadCapacity error" problem with old CR-52x drives (the
- *       drives sometimes need a manual "eject/insert" before work): just
- *       reset the drive and do again. Needs lots of resets here and sometimes
- *       that does not cure, so this can't be the solution.
- *
- *  2.1  Found bug with multisession CDs (accessing frame 16).
- *       "read audio" works now with address type CDROM_MSF, too.
- *       Bigger audio frame buffer: allows reading max. 4 frames at time; this
- *       gives a significant speedup, but reading more than one frame at once
- *       gives missing chunks at each single frame boundary.
- *
- *  2.2  Kernel interface cleanups: timers, init, setup, media check.
- *
- *  2.3  Let "door lock" and "eject" live together.
- *       Implemented "close tray" (done automatically during open).
- *
- *  2.4  Use different names for device registering.
- *
- *  2.5  Added "#if EJECT" code (default: enabled) to automatically eject
- *       the tray during last call to "sbpcd_release".
- *       Added "#if JUKEBOX" code (default: disabled) to automatically eject
- *       the tray during call to "sbpcd_open" if no disk is in.
- *       Turn on the CD volume of "compatible" sound cards, too; just define
- *       SOUND_BASE (in sbpcd.h) accordingly (default: disabled).
- *
- *  2.6  Nothing new.  
- *
- *  2.7  Added CDROMEJECT_SW ioctl to set the "EJECT" behavior on the fly:
- *       0 disables, 1 enables auto-ejecting. Useful to keep the tray in
- *       during shutdown.
- *
- *  2.8  Added first support (still BETA, I need feedback or a drive) for
- *       the Longshine LCS-7260 drives. They appear as double-speed drives
- *       using the "old" command scheme, extended by tray control and door
- *       lock functions.
- *       Found (and fixed preliminary) a flaw with some multisession CDs: we
- *       have to re-direct not only the accesses to frame 16 (the isofs
- *       routines drive it up to max. 100), but also those to the continuation
- *       (repetition) frames (as far as they exist - currently set fix as
- *       16..20).
- *       Changed default of the "JUKEBOX" define. If you use this default,
- *       your tray will eject if you try to mount without a disk in. Next
- *       mount command will insert the tray - so, just fill in a disk. ;-)
- *
- *  2.9  Fulfilled the Longshine LCS-7260 support; with great help and
- *       experiments by Serge Robyns.
- *       First attempts to support the TEAC CD-55A drives; but still not
- *       usable yet.
- *       Implemented the CDROMMULTISESSION ioctl; this is an attempt to handle
- *       multi session CDs more "transparent" (redirection handling has to be
- *       done within the isofs routines, and only for the special purpose of
- *       obtaining the "right" volume descriptor; accesses to the raw device
- *       should not get redirected).
- *
- *  3.0  Just a "normal" increment, with some provisions to do it better. ;-)
- *       Introduced "#define READ_AUDIO" to specify the maximum number of 
- *       audio frames to grab with one request. This defines a buffer size
- *       within kernel space; a value of 0 will reserve no such space and
- *       disable the CDROMREADAUDIO ioctl. A value of 75 enables the reading
- *       of a whole second with one command, but will use a buffer of more
- *       than 172 kB.
- *       Started CD200 support. Drive detection should work, but nothing
- *       more.
- *
- *  3.1  Working to support the CD200 and the Teac CD-55A drives.
- *       AT-BUS style device numbering no longer used: use SCSI style now.
- *       So, the first "found" device has MINOR 0, regardless of the
- *       jumpered drive ID. This implies modifications to the /dev/sbpcd*
- *       entries for some people, but will help the DAU (german TLA, english:
- *       "newbie", maybe ;-) to install his "first" system from a CD.
- *
- *  3.2  Still testing with CD200 and CD-55A drives.
- *
- *  3.3  Working with CD200 support.
- *
- *  3.4  Auto-probing stops if an address of 0 is seen (to be entered with
- *       the kernel command line).
- *       Made the driver "loadable". If used as a module, "audio copy" is
- *       disabled, and the internal read ahead data buffer has a reduced size
- *       of 4 kB; so, throughput may be reduced a little bit with slow CPUs.
- *
- *  3.5  Provisions to handle weird photoCDs which have an interrupted
- *       "formatting" immediately after the last frames of some files: simply
- *       never "read ahead" with MultiSession CDs. By this, CPU usage may be
- *       increased with those CDs, and there may be a loss in speed.
- *       Re-structured the messaging system.
- *       The "loadable" version no longer has a limited READ_AUDIO buffer
- *       size.
- *       Removed "MANY_SESSION" handling for "old" multi session CDs.
- *       Added "private" IOCTLs CDROMRESET and CDROMVOLREAD.
- *       Started again to support the TEAC CD-55A drives, now that I found
- *       the money for "my own" drive. ;-)
- *       The TEAC CD-55A support is fairly working now.
- *       I have measured that the drive "delivers" at 600 kB/sec (even with
- *       bigger requests than the drive's 64 kB buffer can satisfy), but
- *       the "real" rate does not exceed 520 kB/sec at the moment. 
- *       Caused by the various changes to build in TEAC support, the timed
- *       loops are de-optimized at the moment (less throughput with CR-52x
- *       drives, and the TEAC will give speed only with SBP_BUFFER_FRAMES 64).
- *
- *  3.6  Fixed TEAC data read problems with SbPro interfaces.
- *       Initial size of the READ_AUDIO buffer is 0. Can get set to any size
- *       during runtime.
- *
- *  3.7  Introduced MAX_DRIVES for some poor interface cards (seen with TEAC
- *       drives) which allow only one drive (ID 0); this avoids repetitive
- *       detection under IDs 1..3. 
- *       Elongated cmd_out_T response waiting; necessary for photo CDs with
- *       a lot of sessions.
- *       Bettered the sbpcd_open() behavior with TEAC drives.
- *
- *  3.8  Elongated max_latency for CR-56x drives.
- *
- *  3.9  Finally fixed the long-known SoundScape/SPEA/Sequoia S-1000 interface
- *       configuration bug.
- *       Now Corey, Heiko, Ken, Leo, Vadim/Eric & Werner are invited to copy
- *       the config_spea() routine into their drivers. ;-)
- *
- *  4.0  No "big step" - normal version increment.
- *       Adapted the benefits from 1.3.33.
- *       Fiddled with CDROMREADAUDIO flaws.
- *       Avoid ReadCapacity command with CD200 drives (the MKE 1.01 version
- *       seems not to support it).
- *       Fulfilled "read audio" for CD200 drives, with help of Pete Heist
- *       (heistp@rpi.edu).
- *
- *  4.1  Use loglevel KERN_INFO with printk().
- *       Added support for "Vertos 100" drive ("ECS-AT") - it is very similar
- *       to the Longshine LCS-7260. Give feedback if you can - I never saw
- *       such a drive, and I have no specs.
- *
- *  4.2  Support for Teac 16-bit interface cards. Can't get auto-detected,
- *       so you have to jumper your card to 0x2C0. Still not 100% - come
- *       in contact if you can give qualified feedback.
- *       Use loglevel KERN_NOTICE with printk(). If you get annoyed by a
- *       flood of unwanted messages and the accompanied delay, try to read
- *       my documentation. Especially the Linux CDROM drivers have to do an
- *       important job for the newcomers, so the "distributed" version has
- *       to fit some special needs. Since generations, the flood of messages
- *       is user-configurable (even at runtime), but to get aware of this, one
- *       needs a special mental quality: the ability to read.
- *       
- *  4.3  CD200F does not like to receive a command while the drive is
- *       reading the ToC; still trying to solve it.
- *       Removed some redundant verify_area calls (yes, Heiko Eissfeldt
- *       is visiting all the Linux CDROM drivers ;-).
- *       
- *  4.4  Adapted one idea from tiensivu@pilot.msu.edu's "stripping-down"
- *       experiments: "KLOGD_PAUSE".
- *       Inhibited "play audio" attempts with data CDs. Provisions for a
- *       "data-safe" handling of "mixed" (data plus audio) Cds.
- *
- *  4.5  Meanwhile Gonzalo Tornaria <tornaria@cmat.edu.uy> (GTL) built a
- *       special end_request routine: we seem to have to take care for not
- *       to have two processes working at the request list. My understanding
- *       was and is that ll_rw_blk should not call do_sbpcd_request as long
- *       as there is still one call active (the first call will care for all
- *       outstanding I/Os, and if a second call happens, that is a bug in
- *       ll_rw_blk.c).
- *       "Check media change" without touching any drive.
- *
- *  4.6  Use a semaphore to synchronize multi-activity; elaborated by Rob
- *       Riggs <rriggs@tesser.com>. At the moment, we simply block "read"
- *       against "ioctl" and vice versa. This could be refined further, but
- *       I guess with almost no performance increase.
- *       Experiments to speed up the CD-55A; again with help of Rob Riggs
- *       (to be true, he gave both, idea & code. ;-)
- *
- *  4.61 Ported to Uniform CD-ROM driver by 
- *       Heiko Eissfeldt <heiko@colossus.escape.de> with additional
- *       changes by Erik Andersen <andersee@debian.org>
- *
- *  4.62 Fix a bug where playing audio left the drive in an unusable state.
- *         Heiko Eissfeldt <heiko@colossus.escape.de>
- *
- *  November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	             Removed init_module & cleanup_module in favor of 
- *	             module_init & module_exit.
- *	             Torben Mathiasen <tmm@image.dk>
- *
- *  4.63 Bug fixes for audio annoyances, new legacy CDROM maintainer.
- *		Annoying things fixed:
- *		TOC reread on automated disk changes
- *		TOC reread on manual cd changes
- *		Play IOCTL tries to play CD before it's actually ready... sometimes.
- *		CD_AUDIO_COMPLETED state so workman (and other playes) can repeat play.
- *		Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000
- *
- *  4.64 Fix module parameters - were being completely ignored.
- *	 Can also specify max_drives=N as a setup int to get rid of
- *	 "ghost" drives on crap hardware (aren't they all?)   Paul Gortmaker
- *
- *  TODO
- *     implement "read all subchannel data" (96 bytes per frame)
- *     remove alot of the virtual status bits and deal with hardware status
- *     move the change of cd for audio to a better place
- *     add debug levels to insmod parameters (trivial)
- *
- *     special thanks to Kai Makisara (kai.makisara@vtt.fi) for his fine
- *     elaborated speed-up experiments (and the fabulous results!), for
- *     the "push" towards load-free wait loops, and for the extensive mail
- *     thread which brought additional hints and bug fixes.
- *
- */
-
-/*
- * Trying to merge requests breaks this driver horribly (as in it goes
- * boom and apparently has done so since 2.3.41).  As it is a legacy
- * driver for a horribly slow double speed CD on a hideous interface
- * designed for polled operation, I won't lose any sleep in simply
- * disallowing merging.				Paul G.  02/2001
- *
- * Thu May 30 14:14:47 CEST 2002:
- *
- * I have presumably found the reson for the above - there was a bogous
- * end_request substitute, which was manipulating the request queues
- * incorrectly. If someone has access to the actual hardware, and it's
- * still operations - well  please free to test it.
- *
- * Marcin Dalecki
- */
-
-/*
- * Add bio/kdev_t changes for 2.5.x required to make it work again. 
- * Still room for improvement in the request handling here if anyone
- * actually cares.  Bring your own chainsaw.    Paul G.  02/2002
- */
-
-
-#include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <stdarg.h>
-#include "sbpcd.h"
-
-#define MAJOR_NR MATSUSHITA_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-/*==========================================================================*/
-#if SBPCD_DIS_IRQ
-# define SBPCD_CLI cli()
-# define SBPCD_STI sti()
-#else
-# define SBPCD_CLI
-# define SBPCD_STI
-#endif
-
-/*==========================================================================*/
-/*
- * auto-probing address list
- * inspired by Adam J. Richter from Yggdrasil
- *
- * still not good enough - can cause a hang.
- *   example: a NE 2000 ethernet card at 300 will cause a hang probing 310.
- * if that happens, reboot and use the LILO (kernel) command line.
- * The possibly conflicting ethernet card addresses get NOT probed 
- * by default - to minimize the hang possibilities. 
- *
- * The SB Pro addresses get "mirrored" at 0x6xx and some more locations - to
- * avoid a type error, the 0x2xx-addresses must get checked before 0x6xx.
- *
- * send mail to emoenke@gwdg.de if your interface card is not FULLY
- * represented here.
- */
-static int sbpcd[] =
-{
-	CDROM_PORT, SBPRO, /* probe with user's setup first */
-#if DISTRIBUTION
-	0x230, 1, /* Soundblaster Pro and 16 (default) */
-#if 0
-	0x300, 0, /* CI-101P (default), WDH-7001C (default),
-		     Galaxy (default), Reveal (one default) */
-	0x250, 1, /* OmniCD default, Soundblaster Pro and 16 */
-	0x2C0, 3, /* Teac 16-bit cards */
-	0x260, 1, /* OmniCD */
-	0x320, 0, /* Lasermate, CI-101P, WDH-7001C, Galaxy, Reveal (other default),
-		     Longshine LCS-6853 (default) */
-	0x338, 0, /* Reveal Sound Wave 32 card model #SC600 */
-	0x340, 0, /* Mozart sound card (default), Lasermate, CI-101P */
-	0x360, 0, /* Lasermate, CI-101P */
-	0x270, 1, /* Soundblaster 16 */
-	0x670, 0, /* "sound card #9" */
-	0x690, 0, /* "sound card #9" */
-	0x338, 2, /* SPEA Media FX, Ensonic SoundScape (default) */
-	0x328, 2, /* SPEA Media FX */
-	0x348, 2, /* SPEA Media FX */
-	0x634, 0, /* some newer sound cards */
-	0x638, 0, /* some newer sound cards */
-	0x230, 1, /* some newer sound cards */
-	/* due to incomplete address decoding of the SbPro card, these must be last */
-	0x630, 0, /* "sound card #9" (default) */
-	0x650, 0, /* "sound card #9" */
-#ifdef MODULE
-	/*
-	 * some "hazardous" locations (no harm with the loadable version)
-	 * (will stop the bus if a NE2000 ethernet card resides at offset -0x10)
-	 */
-	0x330, 0, /* Lasermate, CI-101P, WDH-7001C */
-	0x350, 0, /* Lasermate, CI-101P */
-	0x358, 2, /* SPEA Media FX */
-	0x370, 0, /* Lasermate, CI-101P */
-	0x290, 1, /* Soundblaster 16 */
-	0x310, 0, /* Lasermate, CI-101P, WDH-7001C */
-#endif /* MODULE */
-#endif
-#endif /* DISTRIBUTION */
-};
-
-/*
- * Protects access to global structures etc.
- */
-static  __cacheline_aligned DEFINE_SPINLOCK(sbpcd_lock);
-static struct request_queue *sbpcd_queue;
-
-/* You can only set the first pair, from old MODULE_PARM code.  */
-static int sbpcd_set(const char *val, struct kernel_param *kp)
-{
-	get_options((char *)val, 2, (int *)sbpcd);
-	return 0;
-}
-module_param_call(sbpcd, sbpcd_set, NULL, NULL, 0);
-
-#define NUM_PROBE  (sizeof(sbpcd) / sizeof(int))
-
-/*==========================================================================*/
-
-#define INLINE inline
-
-/*==========================================================================*/
-/*
- * the forward references:
- */
-static void sbp_sleep(u_int);
-static void mark_timeout_delay(u_long);
-static void mark_timeout_data(u_long);
-#if 0
-static void mark_timeout_audio(u_long);
-#endif
-static void sbp_read_cmd(struct request *req);
-static int sbp_data(struct request *req);
-static int cmd_out(void);
-static int DiskInfo(void);
-
-/*==========================================================================*/
-
-/*
- * pattern for printk selection:
- *
- * (1<<DBG_INF)  necessary information
- * (1<<DBG_BSZ)  BLOCK_SIZE trace
- * (1<<DBG_REA)  "read" status trace
- * (1<<DBG_CHK)  "media check" trace
- * (1<<DBG_TIM)  datarate timer test
- * (1<<DBG_INI)  initialization trace
- * (1<<DBG_TOC)  tell TocEntry values
- * (1<<DBG_IOC)  ioctl trace
- * (1<<DBG_STA)  "ResponseStatus" trace
- * (1<<DBG_ERR)  "cc_ReadError" trace
- * (1<<DBG_CMD)  "cmd_out" trace
- * (1<<DBG_WRN)  give explanation before auto-probing
- * (1<<DBG_MUL)  multi session code test
- * (1<<DBG_IDX)  "drive_id != 0" test code
- * (1<<DBG_IOX)  some special information
- * (1<<DBG_DID)  drive ID test
- * (1<<DBG_RES)  drive reset info
- * (1<<DBG_SPI)  SpinUp test info
- * (1<<DBG_IOS)  ioctl trace: "subchannel"
- * (1<<DBG_IO2)  ioctl trace: general
- * (1<<DBG_UPC)  show UPC info
- * (1<<DBG_XA1)  XA mode debugging
- * (1<<DBG_LCK)  door (un)lock info
- * (1<<DBG_SQ1)   dump SubQ frame
- * (1<<DBG_AUD)  "read audio" debugging
- * (1<<DBG_SEQ)  Sequoia interface configuration trace
- * (1<<DBG_LCS)  Longshine LCS-7260 debugging trace
- * (1<<DBG_CD2)  MKE/Funai CD200 debugging trace
- * (1<<DBG_TEA)  TEAC CD-55A debugging trace
- * (1<<DBG_ECS)  ECS-AT (Vertos-100) debugging trace
- * (1<<DBG_000)  unnecessary information
- */
-#if DISTRIBUTION
-static int sbpcd_debug = (1<<DBG_INF);
-#else
-static int sbpcd_debug = 0 & ((1<<DBG_INF) |
-			  (1<<DBG_TOC) |
-			  (1<<DBG_MUL) |
-			  (1<<DBG_UPC));
-#endif /* DISTRIBUTION */
-
-static int sbpcd_ioaddr = CDROM_PORT;	/* default I/O base address */
-static int sbpro_type = SBPRO;
-static unsigned char f_16bit;
-static unsigned char do_16bit;
-static int CDo_command, CDo_reset;
-static int CDo_sel_i_d, CDo_enable;
-static int CDi_info, CDi_status, CDi_data;
-static struct cdrom_msf msf;
-static struct cdrom_ti ti;
-static struct cdrom_tochdr tochdr;
-static struct cdrom_tocentry tocentry;
-static struct cdrom_subchnl SC;
-static struct cdrom_volctrl volctrl;
-static struct cdrom_read_audio read_audio;
-
-static unsigned char msgnum;
-static char msgbuf[80];
-
-static int max_drives = MAX_DRIVES;
-module_param(max_drives, int, 0);
-#ifndef MODULE
-static unsigned char setup_done;
-static const char *str_sb_l = "soundblaster";
-static const char *str_sp_l = "spea";
-static const char *str_ss_l = "soundscape";
-static const char *str_t16_l = "teac16bit";
-static const char *str_ss = "SoundScape";
-#endif
-static const char *str_sb = "SoundBlaster";
-static const char *str_lm = "LaserMate";
-static const char *str_sp = "SPEA";
-static const char *str_t16 = "Teac16bit";
-static const char *type;
-static const char *major_name="sbpcd";
-
-/*==========================================================================*/
-
-#ifdef FUTURE
-static DECLARE_WAIT_QUEUE_HEAD(sbp_waitq);
-#endif /* FUTURE */
-
-static int teac=SBP_TEAC_SPEED;
-static int buffers=SBP_BUFFER_FRAMES;
-
-static u_char family0[]="MATSHITA"; /* MKE CR-521, CR-522, CR-523 */
-static u_char family1[]="CR-56";    /* MKE CR-562, CR-563 */
-static u_char family2[]="CD200";    /* MKE CD200, Funai CD200F */
-static u_char familyL[]="LCS-7260"; /* Longshine LCS-7260 */
-static u_char familyT[]="CD-55";    /* TEAC CD-55A */
-static u_char familyV[]="ECS-AT";   /* ECS Vertos 100 */
-
-static u_int recursion; /* internal testing only */
-static u_int fatal_err; /* internal testing only */
-static u_int response_count;
-static u_int flags_cmd_out;
-static u_char cmd_type;
-static u_char drvcmd[10];
-static u_char infobuf[20];
-static u_char xa_head_buf[CD_XA_HEAD];
-static u_char xa_tail_buf[CD_XA_TAIL];
-
-#if OLD_BUSY
-static volatile u_char busy_data;
-static volatile u_char busy_audio; /* true semaphores would be safer */
-#endif /* OLD_BUSY */ 
-static DECLARE_MUTEX(ioctl_read_sem);
-static u_long timeout;
-static volatile u_char timed_out_delay;
-static volatile u_char timed_out_data;
-#if 0
-static volatile u_char timed_out_audio;
-#endif
-static u_int datarate= 1000000;
-static u_int maxtim16=16000000;
-static u_int maxtim04= 4000000;
-static u_int maxtim02= 2000000;
-static u_int maxtim_8=   30000;
-#if LONG_TIMING
-static u_int maxtim_data= 9000;
-#else
-static u_int maxtim_data= 3000;
-#endif /* LONG_TIMING */ 
-#if DISTRIBUTION
-static int n_retries=6;
-#else
-static int n_retries=6;
-#endif
-/*==========================================================================*/
-
-static int ndrives;
-static u_char drv_pattern[NR_SBPCD]={speed_auto,speed_auto,speed_auto,speed_auto};
-
-/*==========================================================================*/
-/*
- * drive space begins here (needed separate for each unit) 
- */
-static struct sbpcd_drive {
-	char drv_id;           /* "jumpered" drive ID or -1 */
-	char drv_sel;          /* drive select lines bits */
-	
-	char drive_model[9];
-	u_char firmware_version[4];
-	char f_eject;          /* auto-eject flag: 0 or 1 */
-	u_char *sbp_buf;       /* Pointer to internal data buffer,
-				  space allocated during sbpcd_init() */
-	u_int sbp_bufsiz;      /* size of sbp_buf (# of frames) */
-	int sbp_first_frame;   /* First frame in buffer */
-	int sbp_last_frame;    /* Last frame in buffer  */
-	int sbp_read_frames;   /* Number of frames being read to buffer */
-	int sbp_current;       /* Frame being currently read */
-	
-	u_char mode;           /* read_mode: READ_M1, READ_M2, READ_SC, READ_AU */
-	u_char *aud_buf;       /* Pointer to audio data buffer,
-				  space allocated during sbpcd_init() */
-	u_int sbp_audsiz;      /* size of aud_buf (# of raw frames) */
-	u_int drv_type;
-	u_char drv_options;
-	int status_bits;
-	u_char diskstate_flags;
-	u_char sense_byte;
-	
-	u_char CD_changed;
-	char open_count;
-	u_char error_byte;
-	
-	u_char f_multisession;
-	u_int lba_multi;
-	int first_session;
-	int last_session;
-	int track_of_last_session;
-	
-	u_char audio_state;
-	u_int pos_audio_start;
-	u_int pos_audio_end;
-	char vol_chan0;
-	u_char vol_ctrl0;
-	char vol_chan1;
-	u_char vol_ctrl1;
-#if 000 /* no supported drive has it */
-	char vol_chan2;
-	u_char vol_ctrl2;
-	char vol_chan3;
-	u_char vol_ctrl3;
-#endif /*000 */
-	u_char volume_control; /* TEAC on/off bits */
-	
-	u_char SubQ_ctl_adr;
-	u_char SubQ_trk;
-	u_char SubQ_pnt_idx;
-	u_int SubQ_run_tot;
-	u_int SubQ_run_trk;
-	u_char SubQ_whatisthis;
-	
-	u_char UPC_ctl_adr;
-	u_char UPC_buf[7];
-	
-	int frame_size;
-	int CDsize_frm;
-	
-	u_char xa_byte; /* 0x20: XA capabilities */
-	u_char n_first_track; /* binary */
-	u_char n_last_track; /* binary (not bcd), 0x01...0x63 */
-	u_int size_msf; /* time of whole CD, position of LeadOut track */
-	u_int size_blk;
-	
-	u_char TocEnt_nixbyte; /* em */
-	u_char TocEnt_ctl_adr;
-	u_char TocEnt_number;
-	u_char TocEnt_format; /* em */
-	u_int TocEnt_address;
-#ifdef SAFE_MIXED
-	char has_data;
-#endif /* SAFE_MIXED */ 
-	u_char ored_ctl_adr; /* to detect if CDROM contains data tracks */
-	
-	struct {
-		u_char nixbyte; /* em */
-		u_char ctl_adr; /* 0x4x: data, 0x0x: audio */
-		u_char number;
-		u_char format; /* em */ /* 0x00: lba, 0x01: msf */
-		u_int address;
-	} TocBuffer[MAX_TRACKS+1]; /* last entry faked */ 
-	
-	int in_SpinUp; /* CR-52x test flag */
-	int n_bytes; /* TEAC awaited response count */
-	u_char error_state, b3, b4; /* TEAC command error state */
-	u_char f_drv_error; /* TEAC command error flag */
-	u_char speed_byte;
-	int frmsiz;
-	u_char f_XA; /* 1: XA */
-	u_char type_byte; /* 0, 1, 3 */
-	u_char mode_xb_6;
-	u_char mode_yb_7;
-	u_char mode_xb_8;
-	u_char delay;
-	struct cdrom_device_info *sbpcd_infop;
-	struct gendisk *disk;
-} D_S[NR_SBPCD];
-
-static struct sbpcd_drive *current_drive = D_S;
-
-/*
- * drive space ends here (needed separate for each unit)
- */
-/*==========================================================================*/
-#if 0
-unsigned long cli_sti; /* for saving the processor flags */
-#endif
-/*==========================================================================*/
-static DEFINE_TIMER(delay_timer, mark_timeout_delay, 0, 0);
-static DEFINE_TIMER(data_timer, mark_timeout_data, 0, 0);
-#if 0
-static DEFINE_TIMER(audio_timer, mark_timeout_audio, 0, 0);
-#endif
-/*==========================================================================*/
-/*
- * DDI interface
- */
-static void msg(int level, const char *fmt, ...)
-{
-#if DISTRIBUTION
-#define MSG_LEVEL KERN_NOTICE
-#else
-#define MSG_LEVEL KERN_INFO
-#endif /* DISTRIBUTION */
-
-	char buf[256];
-	va_list args;
-	
-	if (!(sbpcd_debug&(1<<level))) return;
-	
-	msgnum++;
-	if (msgnum>99) msgnum=0;
-	va_start(args, fmt);
-	vsnprintf(buf, sizeof(buf), fmt, args);
-	va_end(args);
-	printk(MSG_LEVEL "%s-%d [%02d]:  %s", major_name, current_drive - D_S, msgnum, buf);
-#if KLOGD_PAUSE
-	sbp_sleep(KLOGD_PAUSE); /* else messages get lost */
-#endif /* KLOGD_PAUSE */ 
-	return;
-}
-/*==========================================================================*/
-/*
- * DDI interface: runtime trace bit pattern maintenance
- */
-static int sbpcd_dbg_ioctl(unsigned long arg, int level)
-{
-	switch(arg)
-	{
-	case 0:	/* OFF */
-		sbpcd_debug = DBG_INF;
-		break;
-		
-	default:
-		if (arg>=128) sbpcd_debug &= ~(1<<(arg-128));
-		else sbpcd_debug |= (1<<arg);
-	}
-	return (arg);
-}
-/*==========================================================================*/
-static void mark_timeout_delay(u_long i)
-{
-	timed_out_delay=1;
-#if 0
-	msg(DBG_TIM,"delay timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-static void mark_timeout_data(u_long i)
-{
-	timed_out_data=1;
-#if 0
-	msg(DBG_TIM,"data timer expired.\n");
-#endif
-}
-/*==========================================================================*/
-#if 0
-static void mark_timeout_audio(u_long i)
-{
-	timed_out_audio=1;
-#if 0
-	msg(DBG_TIM,"audio timer expired.\n");
-#endif
-}
-#endif
-/*==========================================================================*/
-/*
- * Wait a little while (used for polling the drive).
- */
-static void sbp_sleep(u_int time)
-{
-	sti();
-	schedule_timeout_interruptible(time);
-	sti();
-}
-/*==========================================================================*/
-#define RETURN_UP(rc) {up(&ioctl_read_sem); return(rc);}
-/*==========================================================================*/
-/*
- *  convert logical_block_address to m-s-f_number (3 bytes only)
- */
-static INLINE void lba2msf(int lba, u_char *msf)
-{
-	lba += CD_MSF_OFFSET;
-	msf[0] = lba / (CD_SECS*CD_FRAMES);
-	lba %= CD_SECS*CD_FRAMES;
-	msf[1] = lba / CD_FRAMES;
-	msf[2] = lba % CD_FRAMES;
-}
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- *  convert msf-bin to msf-bcd
- */
-static INLINE void bin2bcdx(u_char *p)  /* must work only up to 75 or 99 */
-{
-	*p=((*p/10)<<4)|(*p%10);
-}
-/*==========================================================================*/
-static INLINE u_int blk2msf(u_int blk)
-{
-	MSF msf;
-	u_int mm;
-	
-	msf.c[3] = 0;
-	msf.c[2] = (blk + CD_MSF_OFFSET) / (CD_SECS * CD_FRAMES);
-	mm = (blk + CD_MSF_OFFSET) % (CD_SECS * CD_FRAMES);
-	msf.c[1] = mm / CD_FRAMES;
-	msf.c[0] = mm % CD_FRAMES;
-	return (msf.n);
-}
-/*==========================================================================*/
-static INLINE u_int make16(u_char rh, u_char rl)
-{
-	return ((rh<<8)|rl);
-}
-/*==========================================================================*/
-static INLINE u_int make32(u_int rh, u_int rl)
-{
-	return ((rh<<16)|rl);
-}
-/*==========================================================================*/
-static INLINE u_char swap_nibbles(u_char i)
-{
-	return ((i<<4)|(i>>4));
-}
-/*==========================================================================*/
-static INLINE u_char byt2bcd(u_char i)
-{
-	return (((i/10)<<4)+i%10);
-}
-/*==========================================================================*/
-static INLINE u_char bcd2bin(u_char bcd)
-{
-	return ((bcd>>4)*10+(bcd&0x0F));
-}
-/*==========================================================================*/
-static INLINE int msf2blk(int msfx)
-{
-	MSF msf;
-	int i;
-	
-	msf.n=msfx;
-	i=(msf.c[2] * CD_SECS + msf.c[1]) * CD_FRAMES + msf.c[0] - CD_MSF_OFFSET;
-	if (i<0) return (0);
-	return (i);
-}
-/*==========================================================================*/
-/*
- *  convert m-s-f_number (3 bytes only) to logical_block_address 
- */
-static INLINE int msf2lba(u_char *msf)
-{
-	int i;
-	
-	i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_MSF_OFFSET;
-	if (i<0) return (0);
-	return (i);
-}
-/*==========================================================================*/
-/* evaluate cc_ReadError code */ 
-static int sta2err(int sta)
-{
-	if (famT_drive)
-	{
-		if (sta==0x00) return (0);
-		if (sta==0x01) return (-604); /* CRC error */
-		if (sta==0x02) return (-602); /* drive not ready */
-		if (sta==0x03) return (-607); /* unknown media */
-		if (sta==0x04) return (-612); /* general failure */
-		if (sta==0x05) return (0);
-		if (sta==0x06) return (-ERR_DISKCHANGE); /* disk change */
-		if (sta==0x0b) return (-612); /* general failure */
-		if (sta==0xff) return (-612); /* general failure */
-		return (0);
-	}
-	else
-	{
-		if (sta<=2) return (sta);
-		if (sta==0x05) return (-604); /* CRC error */
-		if (sta==0x06) return (-606); /* seek error */
-		if (sta==0x0d) return (-606); /* seek error */
-		if (sta==0x0e) return (-603); /* unknown command */
-		if (sta==0x14) return (-603); /* unknown command */
-		if (sta==0x0c) return (-611); /* read fault */
-		if (sta==0x0f) return (-611); /* read fault */
-		if (sta==0x10) return (-611); /* read fault */
-		if (sta>=0x16) return (-612); /* general failure */
-		if (sta==0x11) return (-ERR_DISKCHANGE); /* disk change (LCS: removed) */
-		if (famL_drive)
-			if (sta==0x12) return (-ERR_DISKCHANGE); /* disk change (inserted) */
-		return (-602); /* drive not ready */
-	}
-}
-/*==========================================================================*/
-static INLINE void clr_cmdbuf(void)
-{
-	int i;
-	
-	for (i=0;i<10;i++) drvcmd[i]=0;
-	cmd_type=0;
-}
-/*==========================================================================*/
-static void flush_status(void)
-{
-	int i;
-	
-	sbp_sleep(15*HZ/10);
-	for (i=maxtim_data;i!=0;i--) inb(CDi_status);
-}
-/*====================================================================*/
-/*
- * CDi status loop for Teac CD-55A (Rob Riggs)
- *
- * This is needed because for some strange reason
- * the CD-55A can take a real long time to give a
- * status response. This seems to happen after we
- * issue a READ command where a long seek is involved.
- *
- * I tried to ensure that we get max throughput with
- * minimal busy waiting. We busy wait at first, then
- * "switch gears" and start sleeping. We sleep for
- * longer periods of time the longer we wait.
- *
- */
-static int CDi_stat_loop_T(void)
-{
-	int	i, gear=1;
-	u_long  timeout_1, timeout_2, timeout_3, timeout_4;
-
-	timeout_1 = jiffies + HZ / 50;  /* sbp_sleep(0) for a short period */
-	timeout_2 = jiffies + HZ / 5;	/* nap for no more than 200ms */
-	timeout_3 = jiffies + 5 * HZ;	/* sleep for up to 5s */
-	timeout_4 = jiffies + 45 * HZ;	/* long sleep for up to 45s. */
-	do
-          {
-            i = inb(CDi_status);
-            if (!(i&s_not_data_ready)) return (i);
-            if (!(i&s_not_result_ready)) return (i);
-            switch(gear)
-              {
-              case 4:
-                sbp_sleep(HZ);
-                if (time_after(jiffies, timeout_4)) gear++;
-                msg(DBG_TEA, "CDi_stat_loop_T: long sleep active.\n");
-                break;
-              case 3:
-                sbp_sleep(HZ/10);
-                if (time_after(jiffies, timeout_3)) gear++;
-                break;
-              case 2:
-                sbp_sleep(HZ/100);
-                if (time_after(jiffies, timeout_2)) gear++;
-                break;
-              case 1:
-                sbp_sleep(0);
-                if (time_after(jiffies, timeout_1)) gear++;
-              }
-          } while (gear < 5);
-	return -1;
-}
-/*==========================================================================*/
-static int CDi_stat_loop(void)
-{
-	int i,j;
-	
-	for(timeout = jiffies + 10*HZ, i=maxtim_data; time_before(jiffies, timeout); )
-	{
-		for ( ;i!=0;i--)
-		{
-			j=inb(CDi_status);
-			if (!(j&s_not_data_ready)) return (j);
-			if (!(j&s_not_result_ready)) return (j);
-			if (fam0L_drive) if (j&s_attention) return (j);
-		}
-		sbp_sleep(1);
-		i = 1;
-	}
-	msg(DBG_LCS,"CDi_stat_loop failed in line %d\n", __LINE__);
-	return (-1);
-}
-/*==========================================================================*/
-#if 00000
-/*==========================================================================*/
-static int tst_DataReady(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_not_data_ready) return (0);
-	return (1);
-}
-/*==========================================================================*/
-static int tst_ResultReady(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_not_result_ready) return (0);
-	return (1);
-}
-/*==========================================================================*/
-static int tst_Attention(void)
-{
-	int i;
-	
-	i=inb(CDi_status);
-	if (i&s_attention) return (1);
-	return (0);
-}
-/*==========================================================================*/
-#endif
-/*==========================================================================*/
-static int ResponseInfo(void)
-{
-	int i,j,st=0;
-	u_long timeout;
-	
-	for (i=0,timeout=jiffies+HZ;i<response_count;i++) 
-	{
-		for (j=maxtim_data; ; )
-		{
-			for ( ;j!=0;j-- )
-			{
-				st=inb(CDi_status);
-				if (!(st&s_not_result_ready)) break;
-			}
-			if ((j!=0)||time_after_eq(jiffies, timeout)) break;
-			sbp_sleep(1);
-			j = 1;
-		}
-		if (time_after_eq(jiffies, timeout)) break;
-		infobuf[i]=inb(CDi_info);
-	}
-#if 000
-	while (!(inb(CDi_status)&s_not_result_ready))
-	{
-		infobuf[i++]=inb(CDi_info);
-	}
-	j=i-response_count;
-	if (j>0) msg(DBG_INF,"ResponseInfo: got %d trailing bytes.\n",j);
-#endif /* 000 */
-	for (j=0;j<i;j++)
-		sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-	msgbuf[j*3]=0;
-	msg(DBG_CMD,"ResponseInfo:%s (%d,%d)\n",msgbuf,response_count,i);
-	j=response_count-i;
-	if (j>0) return (-j);
-	else return (i);
-}
-/*==========================================================================*/
-static void EvaluateStatus(int st)
-{
-	current_drive->status_bits=0;
-	if (fam1_drive) current_drive->status_bits=st|p_success;
-	else if (fam0_drive)
-	{
-		if (st&p_caddin_old) current_drive->status_bits |= p_door_closed|p_caddy_in;
-		if (st&p_spinning) current_drive->status_bits |= p_spinning;
-		if (st&p_check) current_drive->status_bits |= p_check;
- 		if (st&p_success_old) current_drive->status_bits |= p_success;
- 		if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
-		if (st&p_disk_ok) current_drive->status_bits |= p_disk_ok;
-	}
-	else if (famLV_drive)
-	{
- 		current_drive->status_bits |= p_success;
-		if (st&p_caddin_old) current_drive->status_bits |= p_disk_ok|p_caddy_in;
-		if (st&p_spinning) current_drive->status_bits |= p_spinning;
-		if (st&p_check) current_drive->status_bits |= p_check;
-		if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
-		if (st&p_lcs_door_closed) current_drive->status_bits |= p_door_closed;
-		if (st&p_lcs_door_locked) current_drive->status_bits |= p_door_locked;
-	}
-	else if (fam2_drive)
-	{
- 		current_drive->status_bits |= p_success;
-		if (st&p2_check) current_drive->status_bits |= p1_check;
-		if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
-		if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
-		if (st&p2_busy1) current_drive->status_bits |= p1_busy;
-		if (st&p2_busy2) current_drive->status_bits |= p1_busy;
-		if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
-		if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
-		if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
-	}
-	else if (famT_drive)
-	{
-		return; /* still needs to get coded */
- 		current_drive->status_bits |= p_success;
-		if (st&p2_check) current_drive->status_bits |= p1_check;
-		if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
-		if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
-		if (st&p2_busy1) current_drive->status_bits |= p1_busy;
-		if (st&p2_busy2) current_drive->status_bits |= p1_busy;
-		if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
-		if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
-		if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
-	}
-	return;
-}
-/*==========================================================================*/
-static int cmd_out_T(void);
-
-static int get_state_T(void)
-{
-	int i;
-
-	clr_cmdbuf();
-	current_drive->n_bytes=1;
-	drvcmd[0]=CMDT_STATUS;
-	i=cmd_out_T();
-	if (i>=0) i=infobuf[0];
-	else
-	{
-		msg(DBG_TEA,"get_state_T error %d\n", i);
-		return (i);
-	}
-	if (i>=0)
-		/* 2: closed, disk in */
-		current_drive->status_bits=p1_door_closed|p1_disk_in|p1_spinning|p1_disk_ok;
-	else if (current_drive->error_state==6)
-	{
-		/* 3: closed, disk in, changed ("06 xx xx") */
-		current_drive->status_bits=p1_door_closed|p1_disk_in;
-		current_drive->CD_changed=0xFF;
-		current_drive->diskstate_flags &= ~toc_bit;
-	}
-	else if ((current_drive->error_state!=2)||(current_drive->b3!=0x3A)||(current_drive->b4==0x00))
-	{
-		/* 1: closed, no disk ("xx yy zz"or "02 3A 00") */
-		current_drive->status_bits=p1_door_closed;
-		current_drive->open_count=0;
-	}
-	else if (current_drive->b4==0x01)
-	{
-		/* 0: open ("02 3A 01") */
-		current_drive->status_bits=0;
-		current_drive->open_count=0;
-	}
-	else
-	{
-		/* 1: closed, no disk ("02 3A xx") */
-		current_drive->status_bits=p1_door_closed;
-		current_drive->open_count=0;
-	}
-	return (current_drive->status_bits);
-}
-/*==========================================================================*/
-static int ResponseStatus(void)
-{
-	int i,j;
-	u_long timeout;
-	
-	msg(DBG_STA,"doing ResponseStatus...\n");
-	if (famT_drive) return (get_state_T());
-	if (flags_cmd_out & f_respo3) timeout = jiffies;
-	else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ;
-	else timeout = jiffies + 4*HZ;
-	j=maxtim_8;
-	do
-	{
-		for ( ;j!=0;j--)
-		{ 
-			i=inb(CDi_status);
-			if (!(i&s_not_result_ready)) break;
-		}
-		if ((j!=0)||time_after(jiffies, timeout)) break;
-		sbp_sleep(1);
-		j = 1;
-	}
-	while (1);
-	if (j==0) 
-	{
-		if ((flags_cmd_out & f_respo3) == 0)
-			msg(DBG_STA,"ResponseStatus: timeout.\n");
-		current_drive->status_bits=0;
-		return (-401);
-	}
-	i=inb(CDi_info);
-	msg(DBG_STA,"ResponseStatus: response %02X.\n", i);
-	EvaluateStatus(i);
-	msg(DBG_STA,"status_bits=%02X, i=%02X\n",current_drive->status_bits,i);
-	return (current_drive->status_bits);
-}
-/*==========================================================================*/
-static void cc_ReadStatus(void)
-{
-	int i;
-	
-	msg(DBG_STA,"giving cc_ReadStatus command\n");
-	if (famT_drive) return;
-	SBPCD_CLI;
-	if (fam0LV_drive) OUT(CDo_command,CMD0_STATUS);
-	else if (fam1_drive) OUT(CDo_command,CMD1_STATUS);
-	else if (fam2_drive) OUT(CDo_command,CMD2_STATUS);
-	if (!fam0LV_drive) for (i=0;i<6;i++) OUT(CDo_command,0);
-	SBPCD_STI;
-}
-/*==========================================================================*/
-static int cc_ReadError(void)
-{
-	int i;
-
-	clr_cmdbuf();
-	msg(DBG_ERR,"giving cc_ReadError command.\n");
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ_ERR;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_READ_ERR;
-		response_count=6;
-		if (famLV_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_READ_ERR;
-		response_count=6;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		response_count=5;
-		drvcmd[0]=CMDT_READ_ERR;
-	}
-	i=cmd_out();
-	current_drive->error_byte=0;
-	msg(DBG_ERR,"cc_ReadError: cmd_out(CMDx_READ_ERR) returns %d (%02X)\n",i,i);
-	if (i<0) return (i);
-	if (fam0V_drive) i=1;
-	else i=2;
-	current_drive->error_byte=infobuf[i];
-	msg(DBG_ERR,"cc_ReadError: infobuf[%d] is %d (%02X)\n",i,current_drive->error_byte,current_drive->error_byte);
-	i=sta2err(infobuf[i]);
-        if (i==-ERR_DISKCHANGE)
-        {
-                current_drive->CD_changed=0xFF;
-                current_drive->diskstate_flags &= ~toc_bit;
-        }
-	return (i);
-}
-/*==========================================================================*/
-static int cc_DriveReset(void);
-
-static int cmd_out_T(void)
-{
-#undef CMDT_TRIES
-#define CMDT_TRIES 1000
-#define TEST_FALSE_FF 1
-
-	int i, j, l=0, m, ntries;
-	unsigned long flags;
-
-	current_drive->error_state=0;
-	current_drive->b3=0;
-	current_drive->b4=0;
-	current_drive->f_drv_error=0;
-	for (i=0;i<10;i++) sprintf(&msgbuf[i*3]," %02X",drvcmd[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_CMD,"cmd_out_T:%s\n",msgbuf);
-
-	OUT(CDo_sel_i_d,0);
-	OUT(CDo_enable,current_drive->drv_sel);
-	i=inb(CDi_status);
-	do_16bit=0;
-	if ((f_16bit)&&(!(i&0x80)))
-	{
-		do_16bit=1;
-		msg(DBG_TEA,"cmd_out_T: do_16bit set.\n");
-	}
-	if (!(i&s_not_result_ready))
-	do
-	{
-		j=inb(CDi_info);
-		i=inb(CDi_status);
-		sbp_sleep(0);
-		msg(DBG_TEA,"cmd_out_T: spurious !s_not_result_ready. (%02X)\n", j);
-	}
-	while (!(i&s_not_result_ready));
-	save_flags(flags); cli();
-	for (i=0;i<10;i++) OUT(CDo_command,drvcmd[i]);
-	restore_flags(flags);
-	for (ntries=CMDT_TRIES;ntries>0;ntries--)
-	{
-		if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ); /* fixme */
-#if 01
-		OUT(CDo_sel_i_d,1);
-#endif /* 01 */
-		if (teac==2)
-                  {
-                    if ((i=CDi_stat_loop_T()) == -1) break;
-                  }
-		else
-                  {
-#if 0
-                    OUT(CDo_sel_i_d,1);
-#endif /* 0 */ 
-                    i=inb(CDi_status);
-                  }
-		if (!(i&s_not_data_ready)) /* f.e. CMDT_DISKINFO */
-		{
-			OUT(CDo_sel_i_d,1);
-			if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
-			if (drvcmd[0]==CMDT_DISKINFO)
-			{
-				l=0;
-				do
-                                {
-                                        if (do_16bit)
-                                        {
-                                                i=inw(CDi_data);
-                                                infobuf[l++]=i&0x0ff;
-                                                infobuf[l++]=i>>8;
-#if TEST_FALSE_FF
-                                                if ((l==2)&&(infobuf[0]==0x0ff))
-                                                {
-                                                        infobuf[0]=infobuf[1];
-                                                        l=1;
-                                                        msg(DBG_TEA,"cmd_out_T: do_16bit: false first byte!\n");
-                                                }
-#endif /* TEST_FALSE_FF */ 
-                                        }
-                                        else infobuf[l++]=inb(CDi_data);
-                                        i=inb(CDi_status);
-                                }
-				while (!(i&s_not_data_ready));
-				for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-				msgbuf[j*3]=0;
-				msg(DBG_CMD,"cmd_out_T data response:%s\n", msgbuf);
-			}
-			else
-			{
-				msg(DBG_TEA,"cmd_out_T: data response with cmd_%02X!\n",
-                                    drvcmd[0]);
-				j=0;
-				do
-				{
-                                        if (do_16bit) i=inw(CDi_data);
-                                        else i=inb(CDi_data);
-                                        j++;
-                                        i=inb(CDi_status);
-				}
-				while (!(i&s_not_data_ready));
-				msg(DBG_TEA,"cmd_out_T: data response: discarded %d bytes/words.\n", j);
-				fatal_err++;
-			}
-		}
-		i=inb(CDi_status);
-		if (!(i&s_not_result_ready))
-		{
-			OUT(CDo_sel_i_d,0);
-			if (drvcmd[0]==CMDT_DISKINFO) m=l;
-			else m=0;
-			do
-			{
-				infobuf[m++]=inb(CDi_info);
-				i=inb(CDi_status);
-			}
-			while (!(i&s_not_result_ready));
-			for (j=0;j<m;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
-			msgbuf[j*3]=0;
-			msg(DBG_CMD,"cmd_out_T info response:%s\n", msgbuf);
-			if (drvcmd[0]==CMDT_DISKINFO)
-                        {
-                                infobuf[0]=infobuf[l];
-                                if (infobuf[0]!=0x02) return (l); /* data length */
-                        }
-			else if (infobuf[0]!=0x02) return (m); /* info length */
-			do
-			{
-				++recursion;
-				if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (%02X): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n", drvcmd[0], recursion);
-				clr_cmdbuf();
-				drvcmd[0]=CMDT_READ_ERR;
-				j=cmd_out_T(); /* !!! recursive here !!! */
-				--recursion;
-				sbp_sleep(1);
-			}
-			while (j<0);
-			current_drive->error_state=infobuf[2];
-			current_drive->b3=infobuf[3];
-			current_drive->b4=infobuf[4];
-			if (current_drive->f_drv_error)
-			{
-				current_drive->f_drv_error=0;
-				cc_DriveReset();
-				current_drive->error_state=2;
-			}
-			return (-current_drive->error_state-400);
-		}
-		if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
-		if ((teac==0)||(ntries<(CMDT_TRIES-5))) sbp_sleep(HZ/10);
-		else sbp_sleep(HZ/100);
-		if (ntries>(CMDT_TRIES-50)) continue;
-		msg(DBG_TEA,"cmd_out_T: next CMDT_TRIES (%02X): %d.\n", drvcmd[0], ntries-1);
-	}
-	current_drive->f_drv_error=1;
-	cc_DriveReset();
-	current_drive->error_state=2;
-	return (-99);
-}
-/*==========================================================================*/
-static int cmd_out(void)
-{
-	int i=0;
-	
-	if (famT_drive) return(cmd_out_T());
-	
-	if (flags_cmd_out&f_putcmd)
-	{ 
-		unsigned long flags;
-		for (i=0;i<7;i++)
-			sprintf(&msgbuf[i*3], " %02X", drvcmd[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_CMD,"cmd_out:%s\n", msgbuf);
-		save_flags(flags); cli();
-		for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]);
-		restore_flags(flags);
-	}
-	if (response_count!=0)
-	{
-		if (cmd_type!=0)
-		{
-			if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-			msg(DBG_INF,"misleaded to try ResponseData.\n");
-			if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-			return (-22);
-		}
-		else i=ResponseInfo();
-		if (i<0) return (i);
-	}
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to CDi_stat_loop.\n");
-	if (flags_cmd_out&f_lopsta)
-	{
-		i=CDi_stat_loop();
-		if ((i<0)||!(i&s_attention)) return (-8);
-	}
-	if (!(flags_cmd_out&f_getsta)) goto LOC_229;
-	
- LOC_228:
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadStatus.\n");
-	cc_ReadStatus();
-	
- LOC_229:
-	if (flags_cmd_out&f_ResponseStatus) 
-	{
-		if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to ResponseStatus.\n");
-		i=ResponseStatus();
-		/* builds status_bits, returns orig. status or p_busy_new */
-		if (i<0) return (i);
-		if (flags_cmd_out&(f_bit1|f_wait_if_busy))
-		{
-			if (!st_check)
-			{
-				if ((flags_cmd_out&f_bit1)&&(i&p_success)) goto LOC_232;
-				if ((!(flags_cmd_out&f_wait_if_busy))||(!st_busy)) goto LOC_228;
-			}
-		}
-	}
- LOC_232:
-	if (!(flags_cmd_out&f_obey_p_check)) return (0);
-	if (!st_check) return (0);
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadError.\n");
-	i=cc_ReadError();
-	if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cmd_out OK.\n");
-	msg(DBG_000,"cmd_out: cc_ReadError=%d\n", i);
-	return (i);
-}
-/*==========================================================================*/
-static int cc_Seek(u_int pos, char f_blk_msf)
-{
-	int i;
-	
-  clr_cmdbuf();
-	if (f_blk_msf>1) return (-3);
-	if (fam0V_drive)
-	{
-		drvcmd[0]=CMD0_SEEK;
-		if (f_blk_msf==1) pos=msf2blk(pos);
-		drvcmd[2]=(pos>>16)&0x00FF;
-		drvcmd[3]=(pos>>8)&0x00FF;
-		drvcmd[4]=pos&0x00FF;
-		if (fam0_drive)
-		  flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-			f_ResponseStatus | f_obey_p_check | f_bit1;
-		else
-		  flags_cmd_out = f_putcmd;
-	}
-	else if (fam1L_drive)
-	{
-		drvcmd[0]=CMD1_SEEK; /* same as CMD1_ and CMDL_ */
-		if (f_blk_msf==0) pos=blk2msf(pos);
-		drvcmd[1]=(pos>>16)&0x00FF;
-		drvcmd[2]=(pos>>8)&0x00FF;
-		drvcmd[3]=pos&0x00FF;
-		if (famL_drive)
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-			flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_SEEK;
-		if (f_blk_msf==0) pos=blk2msf(pos);
-		drvcmd[2]=(pos>>24)&0x00FF;
-		drvcmd[3]=(pos>>16)&0x00FF;
-		drvcmd[4]=(pos>>8)&0x00FF;
-		drvcmd[5]=pos&0x00FF;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_SEEK;
-		if (f_blk_msf==1) pos=msf2blk(pos);
-		drvcmd[2]=(pos>>24)&0x00FF;
-		drvcmd[3]=(pos>>16)&0x00FF;
-		drvcmd[4]=(pos>>8)&0x00FF;
-		drvcmd[5]=pos&0x00FF;
-		current_drive->n_bytes=1;
-	}
-	response_count=0;
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SpinUp(void)
-{
-	int i;
-	
-	msg(DBG_SPI,"SpinUp.\n");
-	current_drive->in_SpinUp = 1;
-	clr_cmdbuf();
-	if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_SPINUP;
-		if (fam0L_drive)
-		  flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
-		    f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-		  flags_cmd_out=f_putcmd;
-	}
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SPINUP;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[4]=0x01; /* "spinup" */
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x03; /* "insert", it hopefully spins the drive up */
-	}
-	response_count=0;
-	i=cmd_out();
-	current_drive->in_SpinUp = 0;
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SpinDown(void)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SPINDOWN;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[4]=0x02; /* "eject" */
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		drvcmd[0]=CMDL_SPINDOWN;
-		drvcmd[1]=1;
-		flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (famV_drive)
-	{
-		drvcmd[0]=CMDV_SPINDOWN;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x02; /* "eject" */
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_get_mode_T(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=10;
-	drvcmd[0]=CMDT_GETMODE;
-	drvcmd[4]=response_count;
-	i=cmd_out_T();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_set_mode_T(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=1;
-	drvcmd[0]=CMDT_SETMODE;
-	drvcmd[1]=current_drive->speed_byte;
-	drvcmd[2]=current_drive->frmsiz>>8;
-	drvcmd[3]=current_drive->frmsiz&0x0FF;
-	drvcmd[4]=current_drive->f_XA; /* 1: XA */
-	drvcmd[5]=current_drive->type_byte; /* 0, 1, 3 */
-	drvcmd[6]=current_drive->mode_xb_6;
-	drvcmd[7]=current_drive->mode_yb_7|current_drive->volume_control;
-	drvcmd[8]=current_drive->mode_xb_8;
-	drvcmd[9]=current_drive->delay;
-	i=cmd_out_T();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_prep_mode_T(void)
-{
-	int i, j;
-	
-	i=cc_get_mode_T();
-	if (i<0) return (i);
-	for (i=0;i<10;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
-	current_drive->speed_byte=0x02; /* 0x02: auto quad, 0x82: quad, 0x81: double, 0x80: single */
-	current_drive->frmsiz=make16(infobuf[2],infobuf[3]);
-	current_drive->f_XA=infobuf[4];
-	if (current_drive->f_XA==0) current_drive->type_byte=0;
-	else current_drive->type_byte=1;
-	current_drive->mode_xb_6=infobuf[6];
-	current_drive->mode_yb_7=1;
-	current_drive->mode_xb_8=infobuf[8];
-	current_drive->delay=0; /* 0, 1, 2, 3 */
-	j=cc_set_mode_T();
-	i=cc_get_mode_T();
-	for (i=0;i<10;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
-	return (j);
-}
-/*==========================================================================*/
-static int cc_SetSpeed(u_char speed, u_char x1, u_char x2)
-{
-	int i;
-	
-	if (fam0LV_drive) return (0);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x03;
-		drvcmd[2]=speed;
-		drvcmd[3]=x1;
-		drvcmd[4]=x2;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_SETSPEED;
-		if (speed&speed_auto)
-		{
-			drvcmd[2]=0xFF;
-			drvcmd[3]=0xFF;
-		}
-		else
-		{
-			drvcmd[2]=0;
-			drvcmd[3]=150;
-		}
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		return (0);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_SetVolume(void)
-{
-	int i;
-	u_char channel0,channel1,volume0,volume1;
-	u_char control0,value0,control1,value1;
-	
-	current_drive->diskstate_flags &= ~volume_bit;
-	clr_cmdbuf();
-	channel0=current_drive->vol_chan0;
-	volume0=current_drive->vol_ctrl0;
-	channel1=control1=current_drive->vol_chan1;
-	volume1=value1=current_drive->vol_ctrl1;
-	control0=value0=0;
-	
-	if (famV_drive) return (0);
-
-	if (((current_drive->drv_options&audio_mono)!=0)&&(current_drive->drv_type>=drv_211))
-	{
-		if ((volume0!=0)&&(volume1==0))
-		{
-			volume1=volume0;
-			channel1=channel0;
-		}
-		else if ((volume0==0)&&(volume1!=0))
-		{
-			volume0=volume1;
-			channel0=channel1;
-		}
-	}
-	if (channel0>1)
-	{
-		channel0=0;
-		volume0=0;
-	}
-	if (channel1>1)
-	{
-		channel1=1;
-		volume1=0;
-	}
-	
-	if (fam1_drive)
-	{
-		control0=channel0+1;
-		control1=channel1+1;
-		value0=(volume0>volume1)?volume0:volume1;
-		value1=value0;
-		if (volume0==0) control0=0;
-		if (volume1==0) control1=0;
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x05;
-		drvcmd[3]=control0;
-		drvcmd[4]=value0;
-		drvcmd[5]=control1;
-		drvcmd[6]=value1;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		control0=channel0+1;
-		control1=channel1+1;
-		value0=(volume0>volume1)?volume0:volume1;
-		value1=value0;
-		if (volume0==0) control0=0;
-		if (volume1==0) control1=0;
-		drvcmd[0]=CMD2_SETMODE;
-		drvcmd[1]=0x0E;
-		drvcmd[3]=control0;
-		drvcmd[4]=value0;
-		drvcmd[5]=control1;
-		drvcmd[6]=value1;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famL_drive)
-	{
-		if ((volume0==0)||(channel0!=0)) control0 |= 0x80;
-		if ((volume1==0)||(channel1!=1)) control0 |= 0x40;
-		if (volume0|volume1) value0=0x80;
-		drvcmd[0]=CMDL_SETMODE;
-		drvcmd[1]=0x03;
-		drvcmd[4]=control0;
-		drvcmd[5]=value0;
-		flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (fam0_drive) /* different firmware levels */
-	{
-		if (current_drive->drv_type>=drv_300)
-		{
-			control0=volume0&0xFC;
-			value0=volume1&0xFC;
-			if ((volume0!=0)&&(volume0<4)) control0 |= 0x04;
-			if ((volume1!=0)&&(volume1<4)) value0 |= 0x04;
-			if (channel0!=0) control0 |= 0x01;
-			if (channel1==1) value0 |= 0x01;
-		}
-		else
-		{
-			value0=(volume0>volume1)?volume0:volume1;
-			if (current_drive->drv_type<drv_211)
-			{
-				if (channel0!=0)
-				{
-					i=channel1;
-					channel1=channel0;
-					channel0=i;
-					i=volume1;
-					volume1=volume0;
-					volume0=i;
-				}
-				if (channel0==channel1)
-				{
-					if (channel0==0)
-					{
-						channel1=1;
-						volume1=0;
-						volume0=value0;
-					}
-					else
-					{
-						channel0=0;
-						volume0=0;
-						volume1=value0;
-					}
-				}
-			}
-			
-			if ((volume0!=0)&&(volume1!=0))
-			{
-				if (volume0==0xFF) volume1=0xFF;
-				else if (volume1==0xFF) volume0=0xFF;
-			}
-			else if (current_drive->drv_type<drv_201) volume0=volume1=value0;
-			
-			if (current_drive->drv_type>=drv_201)
-			{
-				if (volume0==0) control0 |= 0x80;
-				if (volume1==0) control0 |= 0x40;
-			}
-			if (current_drive->drv_type>=drv_211)
-			{
-				if (channel0!=0) control0 |= 0x20;
-				if (channel1!=1) control0 |= 0x10;
-			}
-		}
-		drvcmd[0]=CMD0_SETMODE;
-		drvcmd[1]=0x83;
-		drvcmd[4]=control0;
-		drvcmd[5]=value0;
-		flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		current_drive->volume_control=0;
-		if (!volume0) current_drive->volume_control|=0x10;
-		if (!volume1) current_drive->volume_control|=0x20;
-		i=cc_prep_mode_T();
-		if (i<0) return (i);
-	}
-	if (!famT_drive)
-	{
-		response_count=0;
-		i=cmd_out();
-		if (i<0) return (i);
-	}
-	current_drive->diskstate_flags |= volume_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int GetStatus(void)
-{
-	int i;
-	
-	if (famT_drive) return (0);
-	flags_cmd_out=f_getsta|f_ResponseStatus|f_obey_p_check;
-	response_count=0;
-	cmd_type=0;
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_DriveReset(void)
-{
-	int i;
-	
-	msg(DBG_RES,"cc_DriveReset called.\n");
-	clr_cmdbuf();
-	response_count=0;
-	if (fam0LV_drive) OUT(CDo_reset,0x00);
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_RESET;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_RESET;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		OUT(CDo_reset,0x00);
-	}
-	else if (famT_drive)
-	{
-		OUT(CDo_sel_i_d,0);
-		OUT(CDo_enable,current_drive->drv_sel);
-		OUT(CDo_command,CMDT_RESET);
-		for (i=1;i<10;i++) OUT(CDo_command,0);
-	}
-	if (fam0LV_drive) sbp_sleep(5*HZ); /* wait 5 seconds */
-	else sbp_sleep(1*HZ); /* wait a second */
-#if 1
-	if (famT_drive)
-	{
-		msg(DBG_TEA, "================CMDT_RESET given=================.\n");
-		sbp_sleep(3*HZ);
-	}
-#endif /* 1 */ 
-	flush_status();
-	i=GetStatus();
-	if (i<0) return i;
-	if (!famT_drive)
-		if (current_drive->error_byte!=aud_12) return -501;
-	return (0);
-}
-
-/*==========================================================================*/
-static int SetSpeed(void)
-{
-	int i, speed;
-	
-	if (!(current_drive->drv_options&(speed_auto|speed_300|speed_150))) return (0);
-	speed=speed_auto;
-	if (!(current_drive->drv_options&speed_auto))
-	{
-		speed |= speed_300;
-		if (!(current_drive->drv_options&speed_300)) speed=0;
-	}
-	i=cc_SetSpeed(speed,0,0);
-	return (i);
-}
-
-static void switch_drive(struct sbpcd_drive *);
-
-static int sbpcd_select_speed(struct cdrom_device_info *cdi, int speed)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	if (p != current_drive)
-		switch_drive(p);
-
-	return cc_SetSpeed(speed == 2 ? speed_300 : speed_150, 0, 0);
-}
-
-/*==========================================================================*/
-static int DriveReset(void)
-{
-	int i;
-	
-	i=cc_DriveReset();
-	if (i<0) return (-22);
-	do
-	{
-		i=GetStatus();
-		if ((i<0)&&(i!=-ERR_DISKCHANGE)) {
-			return (-2); /* from sta2err */
-		}
-		if (!st_caddy_in) break;
-		sbp_sleep(1);
-	}
-	while (!st_diskok);
-#if 000
-	current_drive->CD_changed=1;
-#endif
-	if ((st_door_closed) && (st_caddy_in))
-	{
-		i=DiskInfo();
-		if (i<0) return (-23);
-	}
-	return (0);
-}
-
-static int sbpcd_reset(struct cdrom_device_info *cdi)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	if (p != current_drive)
-		switch_drive(p);
-	return DriveReset();
-}
-
-/*==========================================================================*/
-static int cc_PlayAudio(int pos_audio_start,int pos_audio_end)
-{
-	int i, j, n;
-	
-	if (current_drive->audio_state==audio_playing) return (-EINVAL);
-	clr_cmdbuf();
-	response_count=0;
-	if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_PLAY;
-		i=msf2blk(pos_audio_start);
-		n=msf2blk(pos_audio_end)+1-i;
-		drvcmd[1]=(i>>16)&0x00FF;
-		drvcmd[2]=(i>>8)&0x00FF;
-		drvcmd[3]=i&0x00FF;
-		drvcmd[4]=(n>>16)&0x00FF;
-		drvcmd[5]=(n>>8)&0x00FF;
-		drvcmd[6]=n&0x00FF;
-		if (famL_drive)
-		flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-			f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
-		else
-		  flags_cmd_out = f_putcmd;
-	}
-	else
-	{
-		j=1;
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus |
-				f_obey_p_check | f_wait_if_busy;
-		}
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_ResponseStatus | f_obey_p_check;
-		}
-		else if (famT_drive)
-		{
-			drvcmd[0]=CMDT_PLAY_MSF;
-			j=3;
-			response_count=1;
-		}
-		else if (fam0_drive)
-		{
-			drvcmd[0]=CMD0_PLAY_MSF;
-			flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
-				f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
-		}
-		drvcmd[j]=(pos_audio_start>>16)&0x00FF;
-		drvcmd[j+1]=(pos_audio_start>>8)&0x00FF;
-		drvcmd[j+2]=pos_audio_start&0x00FF;
-		drvcmd[j+3]=(pos_audio_end>>16)&0x00FF;
-		drvcmd[j+4]=(pos_audio_end>>8)&0x00FF;
-		drvcmd[j+5]=pos_audio_end&0x00FF;
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_Pause_Resume(int pau_res)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_PAU_RES;
-		if (pau_res!=1) drvcmd[1]=0x80;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_PAU_RES;
-		if (pau_res!=1) drvcmd[2]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_PAU_RES;
-		if (pau_res!=1) drvcmd[1]=0x80;
-		if (famL_drive)
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
-				f_obey_p_check|f_bit1;
-		else if (famV_drive)
-		  flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
-				f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		if (pau_res==3)	return (cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end));
-		else if (pau_res==1) drvcmd[0]=CMDT_PAUSE;
-		else return (-56);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int cc_LockDoor(char lock)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	msg(DBG_LCK,"cc_LockDoor: %d (drive %d)\n", lock, current_drive - D_S);
-	msg(DBG_LCS,"p_door_locked bit %d before\n", st_door_locked);
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_LOCK_CTL;
-		if (lock==1) drvcmd[1]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_LOCK_CTL;
-		if (lock==1) drvcmd[4]=0x01;
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_LOCK_CTL;
-		if (lock==1) drvcmd[1]=0x01;
-		if (famL_drive)
-		  flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-		  flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_LOCK_CTL;
-		if (lock==1) drvcmd[4]=0x01;
-	}
-	i=cmd_out();
-	msg(DBG_LCS,"p_door_locked bit %d after\n", st_door_locked);
-	return (i);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int UnLockDoor(void)
-{
-	int i,j;
-	
-	j=20;
-	do
-	{
-		i=cc_LockDoor(0);
-		--j;
-		sbp_sleep(1);
-	}
-	while ((i<0)&&(j));
-	if (i<0)
-	{
-		cc_DriveReset();
-		return -84;
-	}
-	return (0);
-}
-/*==========================================================================*/
-static int LockDoor(void)
-{
-	int i,j;
-	
-	j=20;
-	do
-	{
-		i=cc_LockDoor(1);
-		--j;
-		sbp_sleep(1);
-	}
-	while ((i<0)&&(j));
-	if (j==0)
-	{		
-		cc_DriveReset();
-		j=20;
-		do
-		{
-			i=cc_LockDoor(1);
-			--j;
-			sbp_sleep(1);
-		}
-		while ((i<0)&&(j));
-	}
-	return (i);
-}
-
-static int sbpcd_lock_door(struct cdrom_device_info *cdi, int lock)
-{
-  return lock ? LockDoor() : UnLockDoor();
-}
-
-/*==========================================================================*/
-static int cc_CloseTray(void)
-{
-	int i;
-	
-	if (fam0_drive) return (0);
-	msg(DBG_LCK,"cc_CloseTray (drive %d)\n", current_drive - D_S);
-	msg(DBG_LCS,"p_door_closed bit %d before\n", st_door_closed);
-	
-	clr_cmdbuf();
-	response_count=0;
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_TRAY_CTL;
-		flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_TRAY_CTL;
-		drvcmd[1]=0x01;
-		drvcmd[4]=0x03; /* "insert" */
-		flags_cmd_out=f_putcmd|f_ResponseStatus;
-	}
-	else if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_TRAY_CTL;
-		if (famLV_drive)
-		  flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
-			f_ResponseStatus|f_obey_p_check|f_bit1;
-		else
-		  flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_TRAY_CTL;
-		drvcmd[4]=0x03; /* "insert" */
-	}
-	i=cmd_out();
-	msg(DBG_LCS,"p_door_closed bit %d after\n", st_door_closed);
-
-	i=cc_ReadError();
-	flags_cmd_out |= f_respo2;
-	cc_ReadStatus(); /* command: give 1-byte status */
-	i=ResponseStatus();
-	if (famT_drive&&(i<0))
-	{
-		cc_DriveReset();
-		i=ResponseStatus();
-#if 0
-                sbp_sleep(HZ);
-#endif /* 0 */ 
-		i=ResponseStatus();
-	}
-	if (i<0)
-	{
-		msg(DBG_INF,"sbpcd cc_CloseTray: ResponseStatus timed out (%d).\n",i);
-	}
-	if (!(famT_drive))
-	{
-		if (!st_spinning)
-		{
-			cc_SpinUp();
-			if (st_check) i=cc_ReadError();
-			flags_cmd_out |= f_respo2;
-			cc_ReadStatus();
-			i=ResponseStatus();
-		} else {
-		}
-	}
-	i=DiskInfo();
-	return (i);
-}
-
-static int sbpcd_tray_move(struct cdrom_device_info *cdi, int position)
-{
-	int retval=0;
-	switch_drive(cdi->handle);
-	/* DUH! --AJK */
-	if(current_drive->CD_changed != 0xFF) {
-		current_drive->CD_changed=0xFF;
-		current_drive->diskstate_flags &= ~cd_size_bit;
-	}
-	if (position == 1) {
-		cc_SpinDown();
-	} else {
-		retval=cc_CloseTray();
-	}
-  return retval;
-}
-
-/*==========================================================================*/
-static int cc_ReadSubQ(void)
-{
-	int i,j;
-
-	current_drive->diskstate_flags &= ~subq_bit;
-	for (j=255;j>0;j--)
-	{
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_READSUBQ;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-			response_count=11;
-		}
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_READSUBQ;
-			drvcmd[1]=0x02;
-			drvcmd[3]=0x01;
-			flags_cmd_out=f_putcmd;
-			response_count=10;
-		}
-		else if (fam0LV_drive)
-		{
-			drvcmd[0]=CMD0_READSUBQ;
-			drvcmd[1]=0x02;
-			if (famLV_drive)
-				flags_cmd_out=f_putcmd;
-			else
-				flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-			response_count=13;
-		}
-		else if (famT_drive)
-		{
-			response_count=12;
-			drvcmd[0]=CMDT_READSUBQ;
-			drvcmd[1]=0x02;
-			drvcmd[2]=0x40;
-			drvcmd[3]=0x01;
-			drvcmd[8]=response_count;
-		}
-		i=cmd_out();
-		if (i<0) return (i);
-		for (i=0;i<response_count;i++)
-		{
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_SQ1,"cc_ReadSubQ:%s\n", msgbuf);
-		}
-		if (famT_drive) break;
-		if (infobuf[0]!=0) break;
-		if ((!st_spinning) || (j==1))
-		{
-			current_drive->SubQ_ctl_adr=current_drive->SubQ_trk=current_drive->SubQ_pnt_idx=current_drive->SubQ_whatisthis=0;
-			current_drive->SubQ_run_tot=current_drive->SubQ_run_trk=0;
-			return (0);
-		}
-	}
-	if (famT_drive) current_drive->SubQ_ctl_adr=infobuf[1];
-	else current_drive->SubQ_ctl_adr=swap_nibbles(infobuf[1]);
-	current_drive->SubQ_trk=byt2bcd(infobuf[2]);
-	current_drive->SubQ_pnt_idx=byt2bcd(infobuf[3]);
-	if (fam0LV_drive) i=5;
-	else if (fam12_drive) i=4;
-	else if (famT_drive) i=8;
-	current_drive->SubQ_run_tot=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
-	i=7;
-	if (fam0LV_drive) i=9;
-	else if (fam12_drive) i=7;
-	else if (famT_drive) i=4;
-	current_drive->SubQ_run_trk=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
-	current_drive->SubQ_whatisthis=infobuf[i+3];
-	current_drive->diskstate_flags |= subq_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ModeSense(void)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	if (famV_drive) return (0);
-	current_drive->diskstate_flags &= ~frame_size_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		response_count=5;
-		drvcmd[0]=CMD1_GETMODE;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		response_count=2;
-		drvcmd[0]=CMD0_GETMODE;
-		if (famL_drive) flags_cmd_out=f_putcmd;
-		else flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		response_count=10;
-		drvcmd[0]=CMDT_GETMODE;
-		drvcmd[4]=response_count;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	i=0;
-	current_drive->sense_byte=0;
-	if (fam1_drive) current_drive->sense_byte=infobuf[i++];
-	else if (famT_drive)
-	{
-		if (infobuf[4]==0x01) current_drive->xa_byte=0x20;
-		else current_drive->xa_byte=0;
-		i=2;
-	}
-	current_drive->frame_size=make16(infobuf[i],infobuf[i+1]);
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_XA1,"cc_ModeSense:%s\n", msgbuf);
-	
-	current_drive->diskstate_flags |= frame_size_bit;
-	return (0);
-}
-/*==========================================================================*/
-/*==========================================================================*/
-static int cc_ModeSelect(int framesize)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	if (famV_drive) return (0);
-	current_drive->diskstate_flags &= ~frame_size_bit;
-	clr_cmdbuf();
-	current_drive->frame_size=framesize;
-	if (framesize==CD_FRAMESIZE_RAW) current_drive->sense_byte=0x82;
-	else current_drive->sense_byte=0x00;
-	
-	msg(DBG_XA1,"cc_ModeSelect: %02X %04X\n",
-	    current_drive->sense_byte, current_drive->frame_size);
-	
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_SETMODE;
-		drvcmd[1]=0x00;
-		drvcmd[2]=current_drive->sense_byte;
-		drvcmd[3]=(current_drive->frame_size>>8)&0xFF;
-		drvcmd[4]=current_drive->frame_size&0xFF;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_SETMODE;
-		drvcmd[1]=0x00;
-		drvcmd[2]=(current_drive->frame_size>>8)&0xFF;
-		drvcmd[3]=current_drive->frame_size&0xFF;
-		drvcmd[4]=0x00;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	response_count=0;
-	i=cmd_out();
-	if (i<0) return (i);
-	current_drive->diskstate_flags |= frame_size_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_GetVolume(void)
-{
-	int i;
-	u_char switches;
-	u_char chan0=0;
-	u_char vol0=0;
-	u_char chan1=1;
-	u_char vol1=0;
-	
-	if (famV_drive) return (0);
-	current_drive->diskstate_flags &= ~volume_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_GETMODE;
-		drvcmd[1]=0x05;
-		response_count=5;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_GETMODE;
-		drvcmd[1]=0x0E;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_GETMODE;
-		drvcmd[1]=0x03;
-		response_count=2;
-		if(famL_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		i=cc_get_mode_T();
-		if (i<0) return (i);
-	}
-	if (!famT_drive)
-	{
-		i=cmd_out();
-		if (i<0) return (i);
-	}
-	if (fam1_drive)
-	{
-		chan0=infobuf[1]&0x0F;
-		vol0=infobuf[2];
-		chan1=infobuf[3]&0x0F;
-		vol1=infobuf[4];
-		if (chan0==0)
-		{
-			chan0=1;
-			vol0=0;
-		}
-		if (chan1==0)
-		{
-			chan1=2;
-			vol1=0;
-		}
-		chan0 >>= 1;
-		chan1 >>= 1;
-	}
-	else if (fam2_drive)
-	{
-		chan0=infobuf[1];
-		vol0=infobuf[2];
-		chan1=infobuf[3];
-		vol1=infobuf[4];
-	}
-	else if (famL_drive)
-	{
-		chan0=0;
-		chan1=1;
-		vol0=vol1=infobuf[1];
-		switches=infobuf[0];
-		if ((switches&0x80)!=0) chan0=1;
-		if ((switches&0x40)!=0) chan1=0;
-	}
-	else if (fam0_drive) /* different firmware levels */
-	{
-		chan0=0;
-		chan1=1;
-		vol0=vol1=infobuf[1];
-		if (current_drive->drv_type>=drv_201)
-		{
-			if (current_drive->drv_type<drv_300)
-			{
-				switches=infobuf[0];
-				if ((switches&0x80)!=0) vol0=0;
-				if ((switches&0x40)!=0) vol1=0;
-				if (current_drive->drv_type>=drv_211)
-				{
-					if ((switches&0x20)!=0) chan0=1;
-					if ((switches&0x10)!=0) chan1=0;
-				}
-			}
-			else
-			{
-				vol0=infobuf[0];
-				if ((vol0&0x01)!=0) chan0=1;
-				if ((vol1&0x01)==0) chan1=0;
-				vol0 &= 0xFC;
-				vol1 &= 0xFC;
-				if (vol0!=0) vol0 += 3;
-				if (vol1!=0) vol1 += 3;
-			}
-		}
-	}
-	else if (famT_drive)
-	{
-		current_drive->volume_control=infobuf[7];
-		chan0=0;
-		chan1=1;
-		if (current_drive->volume_control&0x10) vol0=0;
-		else vol0=0xff;
-		if (current_drive->volume_control&0x20) vol1=0;
-		else vol1=0xff;
-	}
-	current_drive->vol_chan0=chan0;
-	current_drive->vol_ctrl0=vol0;
-	current_drive->vol_chan1=chan1;
-	current_drive->vol_ctrl1=vol1;
-#if 000
-	current_drive->vol_chan2=2;
-	current_drive->vol_ctrl2=0xFF;
-	current_drive->vol_chan3=3;
-	current_drive->vol_ctrl3=0xFF;
-#endif /*  000 */
-	current_drive->diskstate_flags |= volume_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadCapacity(void)
-{
-	int i, j;
-	
-	if (fam2_drive) return (0); /* some firmware lacks this command */
-	if (famLV_drive) return (0); /* some firmware lacks this command */
-	if (famT_drive) return (0); /* done with cc_ReadTocDescr() */
-	current_drive->diskstate_flags &= ~cd_size_bit;
-	for (j=3;j>0;j--)
-	{
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_CAPACITY;
-			response_count=5;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		}
-#if 00
-		else if (fam2_drive)
-		{
-			drvcmd[0]=CMD2_CAPACITY;
-			response_count=8;
-			flags_cmd_out=f_putcmd;
-		}
-#endif
-		else if (fam0_drive)
-		{
-			drvcmd[0]=CMD0_CAPACITY;
-			response_count=5;
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-		}
-		i=cmd_out();
-		if (i>=0) break;
-		msg(DBG_000,"cc_ReadCapacity: cmd_out: err %d\n", i);
-		cc_ReadError();
-	}
-	if (j==0) return (i);
-	if (fam1_drive) current_drive->CDsize_frm=msf2blk(make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])))+CD_MSF_OFFSET;
-	else if (fam0_drive) current_drive->CDsize_frm=make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2]));
-#if 00
-	else if (fam2_drive) current_drive->CDsize_frm=make32(make16(infobuf[0],infobuf[1]),make16(infobuf[2],infobuf[3]));
-#endif
-	current_drive->diskstate_flags |= cd_size_bit;
-	msg(DBG_000,"cc_ReadCapacity: %d frames.\n", current_drive->CDsize_frm);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocDescr(void)
-{
-	int i;
-	
-	current_drive->diskstate_flags &= ~toc_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_DISKINFO;
-		response_count=6;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_DISKINFO;
-		response_count=6;
-		if(famLV_drive)
-			flags_cmd_out=f_putcmd;
-		else
-			flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		/* possibly longer timeout periods necessary */
-		current_drive->f_multisession=0;
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=0xAB;
-		drvcmd[3]=0xFF; /* session */
-		response_count=8;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (famT_drive)
-	{
-		current_drive->f_multisession=0;
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=CDROM_LEADOUT;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x00;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	if ((famT_drive)&&(i<response_count)) return (-100-i);
-	if ((fam1_drive)||(fam2_drive)||(fam0LV_drive))
-		current_drive->xa_byte=infobuf[0];
-	if (fam2_drive)
-	{
-		current_drive->first_session=infobuf[1];
-		current_drive->last_session=infobuf[2];
-		current_drive->n_first_track=infobuf[3];
-		current_drive->n_last_track=infobuf[4];
-		if (current_drive->first_session!=current_drive->last_session)
-		{
-			current_drive->f_multisession=1;
-			current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7])));
-		}
-#if 0
-		if (current_drive->first_session!=current_drive->last_session)
-		{
-			if (current_drive->last_session<=20)
-				zwanzig=current_drive->last_session+1;
-			else zwanzig=20;
-			for (count=current_drive->first_session;count<zwanzig;count++)
-			{
-				drvcmd[0]=CMD2_DISKINFO;
-				drvcmd[1]=0x02;
-				drvcmd[2]=0xAB;
-				drvcmd[3]=count;
-				response_count=8;
-				flags_cmd_out=f_putcmd;
-				i=cmd_out();
-				if (i<0) return (i);
-				current_drive->msf_multi_n[count]=make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7]));
-			}
-			current_drive->diskstate_flags |= multisession_bit;
-		}
-#endif
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=0xAA;
-		drvcmd[3]=0xFF;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) return (i);
-		current_drive->size_msf=make32(make16(0,infobuf[2]),make16(infobuf[3],infobuf[4]));
-		current_drive->size_blk=msf2blk(current_drive->size_msf);
-		current_drive->CDsize_frm=current_drive->size_blk+1;
-	}
-	else if (famT_drive)
-	{
-		current_drive->size_msf=make32(make16(infobuf[8],infobuf[9]),make16(infobuf[10],infobuf[11]));
-		current_drive->size_blk=msf2blk(current_drive->size_msf);
-		current_drive->CDsize_frm=current_drive->size_blk+1;
-		current_drive->n_first_track=infobuf[2];
-		current_drive->n_last_track=infobuf[3];
-	}
-	else
-	{
-		current_drive->n_first_track=infobuf[1];
-		current_drive->n_last_track=infobuf[2];
-		current_drive->size_msf=make32(make16(0,infobuf[3]),make16(infobuf[4],infobuf[5]));
-		current_drive->size_blk=msf2blk(current_drive->size_msf);
-		if (famLV_drive) current_drive->CDsize_frm=current_drive->size_blk+1;
-	}
-	current_drive->diskstate_flags |= toc_bit;
-	msg(DBG_TOC,"TocDesc: xa %02X firstt %02X lastt %02X size %08X firstses %02X lastsess %02X\n",
-	    current_drive->xa_byte,
-	    current_drive->n_first_track,
-	    current_drive->n_last_track,
-	    current_drive->size_msf,
-	    current_drive->first_session,
-	    current_drive->last_session);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadTocEntry(int num)
-{
-	int i;
-	
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READTOC;
-		drvcmd[2]=num;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam2_drive)
-	{
-		/* possibly longer timeout periods necessary */
-		drvcmd[0]=CMD2_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[2]=num;
-		response_count=5;
-		flags_cmd_out=f_putcmd;
-	}
-	else if (fam0LV_drive)
-	{
-		drvcmd[0]=CMD0_READTOC;
-		drvcmd[1]=0x02;
-		drvcmd[2]=num;
-		response_count=8;
-		if (famLV_drive)
-			flags_cmd_out=f_putcmd;
-		else
-		  flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (famT_drive)
-	{
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=num;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x00;
-	}
-	i=cmd_out();
-	if (i<0) return (i);
-	if ((famT_drive)&&(i<response_count)) return (-100-i);
-	if ((fam1_drive)||(fam0LV_drive))
-	{
-		current_drive->TocEnt_nixbyte=infobuf[0];
-		i=1;
-	}
-	else if (fam2_drive) i=0;
-	else if (famT_drive) i=5;
-	current_drive->TocEnt_ctl_adr=swap_nibbles(infobuf[i++]);
-	if ((fam1_drive)||(fam0L_drive))
-	{
-		current_drive->TocEnt_number=infobuf[i++];
-		current_drive->TocEnt_format=infobuf[i];
-	}
-	else
-	  {
-	    current_drive->TocEnt_number=num;
-	    current_drive->TocEnt_format=0;
-	  }
-	if (fam1_drive) i=4;
-	else if (fam0LV_drive) i=5;
-	else if (fam2_drive) i=2;
-	else if (famT_drive) i=9;
-	current_drive->TocEnt_address=make32(make16(0,infobuf[i]),
-				     make16(infobuf[i+1],infobuf[i+2]));
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_ECS,"TocEntry:%s\n", msgbuf);
-	msg(DBG_TOC,"TocEntry: %02X %02X %02X %02X %08X\n",
-	    current_drive->TocEnt_nixbyte, current_drive->TocEnt_ctl_adr,
-	    current_drive->TocEnt_number, current_drive->TocEnt_format,
-	    current_drive->TocEnt_address);
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadPacket(void)
-{
-	int i;
-	
-	clr_cmdbuf();
-	drvcmd[0]=CMD0_PACKET;
-	drvcmd[1]=response_count;
-	if(famL_drive) flags_cmd_out=f_putcmd;
-	else if (fam01_drive)
-		flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
-	else if (fam2_drive) return (-1); /* not implemented yet */
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	i=cmd_out();
-	return (i);
-}
-/*==========================================================================*/
-static int convert_UPC(u_char *p)
-{
-	int i;
-	
-	p++;
-	if (fam0L_drive) p[13]=0;
-	for (i=0;i<7;i++)
-	{
-		if (fam1_drive) current_drive->UPC_buf[i]=swap_nibbles(*p++);
-		else if (fam0L_drive)
-		{
-			current_drive->UPC_buf[i]=((*p++)<<4)&0xFF;
-			current_drive->UPC_buf[i] |= *p++;
-		}
-		else if (famT_drive)
-		{
-			return (-1);
-		}
-		else /* CD200 */
-		{
-			return (-1);
-		}
-	}
-	current_drive->UPC_buf[6] &= 0xF0;
-	return (0);
-}
-/*==========================================================================*/
-static int cc_ReadUPC(void)
-{
-	int i;
-#if TEST_UPC
-	int block, checksum;
-#endif /* TEST_UPC */ 
-	
-	if (fam2_drive) return (0); /* not implemented yet */
-	if (famT_drive)	return (0); /* not implemented yet */
-	if (famV_drive)	return (0); /* not implemented yet */
-#if 1
-	if (fam0_drive) return (0); /* but it should work */
-#endif
-	
-	current_drive->diskstate_flags &= ~upc_bit;
-#if TEST_UPC
-	for (block=CD_MSF_OFFSET+1;block<CD_MSF_OFFSET+200;block++)
-	{
-#endif /* TEST_UPC */ 
-		clr_cmdbuf();
-		if (fam1_drive)
-		{
-			drvcmd[0]=CMD1_READ_UPC;
-#if TEST_UPC
-			drvcmd[1]=(block>>16)&0xFF;
-			drvcmd[2]=(block>>8)&0xFF;
-			drvcmd[3]=block&0xFF;
-#endif /* TEST_UPC */ 
-			response_count=8;
-			flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		}
-		else if (fam0L_drive)
-		{
-			drvcmd[0]=CMD0_READ_UPC;
-#if TEST_UPC
-			drvcmd[2]=(block>>16)&0xFF;
-			drvcmd[3]=(block>>8)&0xFF;
-			drvcmd[4]=block&0xFF;
-#endif /* TEST_UPC */ 
-			response_count=0;
-			flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-		}
-		else if (fam2_drive)
-		{
-			return (-1);
-		}
-		else if (famT_drive)
-		{
-			return (-1);
-		}
-		i=cmd_out();
-		if (i<0)
-		{
-			msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
-			return (i);
-		}
-		if (fam0L_drive)
-		{
-			response_count=16;
-			if (famL_drive) flags_cmd_out=f_putcmd;
-			i=cc_ReadPacket();
-			if (i<0)
-			{
-				msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
-				return (i);
-			}
-		}
-#if TEST_UPC
-		checksum=0;
-#endif /* TEST_UPC */ 
-		for (i=0;i<(fam1_drive?8:16);i++)
-		{
-#if TEST_UPC
-			checksum |= infobuf[i];
-#endif /* TEST_UPC */ 
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-		}
-		msgbuf[i*3]=0;
-		msg(DBG_UPC,"UPC info:%s\n", msgbuf);
-#if TEST_UPC
-		if ((checksum&0x7F)!=0) break;
-	}
-#endif /* TEST_UPC */ 
-	current_drive->UPC_ctl_adr=0;
-	if (fam1_drive) i=0;
-	else i=2;
-	if ((infobuf[i]&0x80)!=0)
-	{
-		convert_UPC(&infobuf[i]);
-		current_drive->UPC_ctl_adr = (current_drive->TocEnt_ctl_adr & 0xF0) | 0x02;
-	}
-	for (i=0;i<7;i++)
-		sprintf(&msgbuf[i*3], " %02X", current_drive->UPC_buf[i]);
-	sprintf(&msgbuf[i*3], " (%02X)", current_drive->UPC_ctl_adr);
-	msgbuf[i*3+5]=0;
-	msg(DBG_UPC,"UPC code:%s\n", msgbuf);
-	current_drive->diskstate_flags |= upc_bit;
-	return (0);
-}
-
-static int sbpcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
-{
-	int i;
-	unsigned char *mcnp = mcn->medium_catalog_number;
-	unsigned char *resp;
-
-	current_drive->diskstate_flags &= ~upc_bit;
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ_UPC;
-		response_count=8;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-	}
-	else if (fam0L_drive)
-	{
-		drvcmd[0]=CMD0_READ_UPC;
-		response_count=0;
-		flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
-	}
-	else if (fam2_drive)
-	{
-		return (-1);
-	}
-	else if (famT_drive)
-	{
-		return (-1);
-	}
-	i=cmd_out();
-	if (i<0)
-	{
-		msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
-		return (i);
-	}
-	if (fam0L_drive)
-	{
-		response_count=16;
-		if (famL_drive) flags_cmd_out=f_putcmd;
-		i=cc_ReadPacket();
-		if (i<0)
-		{
-			msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
-			return (i);
-		}
-	}
-	current_drive->UPC_ctl_adr=0;
-	if (fam1_drive) i=0;
-	else i=2;
-
-	resp = infobuf + i;
-	if (*resp++ == 0x80) {
-		/* packed bcd to single ASCII digits */
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-		*mcnp++ = (*resp++ & 0x0f) + '0';
-		*mcnp++ = (*resp >> 4)     + '0';
-	}
-	*mcnp = '\0';
-
-	current_drive->diskstate_flags |= upc_bit;
-	return (0);
-}
-
-/*==========================================================================*/
-static int cc_CheckMultiSession(void)
-{
-	int i;
-	
-	if (fam2_drive) return (0);
-	current_drive->f_multisession=0;
-	current_drive->lba_multi=0;
-	if (fam0_drive) return (0);
-	clr_cmdbuf();
-	if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_MULTISESS;
-		response_count=6;
-		flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
-		i=cmd_out();
-		if (i<0) return (i);
-		if ((infobuf[0]&0x80)!=0)
-		{
-			current_drive->f_multisession=1;
-			current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[1]),
-							make16(infobuf[2],infobuf[3])));
-		}
-	}
-	else if (famLV_drive)
-	{
-		drvcmd[0]=CMDL_MULTISESS;
-		drvcmd[1]=3;
-		drvcmd[2]=1;
-		response_count=8;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) return (i);
-		current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),
-						make16(infobuf[6],infobuf[7])));
-	}
-	else if (famT_drive)
-	{
-		response_count=12;
-		drvcmd[0]=CMDT_DISKINFO;
-		drvcmd[1]=0x02;
-		drvcmd[6]=0;
-		drvcmd[8]=response_count;
-		drvcmd[9]=0x40;
-		i=cmd_out();
-		if (i<0) return (i);
-		if (i<response_count) return (-100-i);
-		current_drive->first_session=infobuf[2];
-		current_drive->last_session=infobuf[3];
-		current_drive->track_of_last_session=infobuf[6];
-		if (current_drive->first_session!=current_drive->last_session)
-		{
-			current_drive->f_multisession=1;
-			current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[9]),make16(infobuf[10],infobuf[11])));
-		}
-	}
-	for (i=0;i<response_count;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_MUL,"MultiSession Info:%s (%d)\n", msgbuf, current_drive->lba_multi);
-	if (current_drive->lba_multi>200)
-	{
-		current_drive->f_multisession=1;
-		msg(DBG_MUL,"MultiSession base: %06X\n", current_drive->lba_multi);
-	}
-	return (0);
-}
-/*==========================================================================*/
-#ifdef FUTURE
-static int cc_SubChanInfo(int frame, int count, u_char *buffer)
-	/* "frame" is a RED BOOK (msf-bin) address */
-{
-	int i;
-	
-	if (fam0LV_drive) return (-ENOSYS); /* drive firmware lacks it */
-	if (famT_drive)
-	{
-		return (-1);
-	}
-#if 0
-	if (current_drive->audio_state!=audio_playing) return (-ENODATA);
-#endif
-	clr_cmdbuf();
-	drvcmd[0]=CMD1_SUBCHANINF;
-	drvcmd[1]=(frame>>16)&0xFF;
-	drvcmd[2]=(frame>>8)&0xFF;
-	drvcmd[3]=frame&0xFF;
-	drvcmd[5]=(count>>8)&0xFF;
-	drvcmd[6]=count&0xFF;
-	flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
-	cmd_type=READ_SC;
-	current_drive->frame_size=CD_FRAMESIZE_SUB;
-	i=cmd_out(); /* which buffer to use? */
-	return (i);
-}
-#endif /* FUTURE */ 
-/*==========================================================================*/
-static void __init check_datarate(void)
-{
-	int i=0;
-	
-	msg(DBG_IOX,"check_datarate entered.\n");
-	datarate=0;
-#if TEST_STI
-	for (i=0;i<=1000;i++) printk(".");
-#endif
-	/* set a timer to make (timed_out_delay!=0) after 1.1 seconds */
-#if 1
-	del_timer(&delay_timer);
-#endif
-	delay_timer.expires=jiffies+11*HZ/10;
-	timed_out_delay=0;
-	add_timer(&delay_timer);
-#if 0
-	msg(DBG_TIM,"delay timer started (11*HZ/10).\n");
-#endif
-	do
-	{
-		i=inb(CDi_status);
-		datarate++;
-#if 1
-		if (datarate>0x6FFFFFFF) break;
-#endif 
-	}
-	while (!timed_out_delay);
-	del_timer(&delay_timer);
-#if 0
-	msg(DBG_TIM,"datarate: %04X\n", datarate);
-#endif
-	if (datarate<65536) datarate=65536;
-	maxtim16=datarate*16;
-	maxtim04=datarate*4;
-	maxtim02=datarate*2;
-	maxtim_8=datarate/32;
-#if LONG_TIMING
-	maxtim_data=datarate/100;
-#else
-	maxtim_data=datarate/300;
-#endif /* LONG_TIMING */ 
-#if 0
-	msg(DBG_TIM,"maxtim_8 %d, maxtim_data %d.\n", maxtim_8, maxtim_data);
-#endif
-}
-/*==========================================================================*/
-#if 0
-static int c2_ReadError(int fam)
-{
-	int i;
-	
-	clr_cmdbuf();
-	response_count=9;
-	clr_respo_buf(9);
-	if (fam==1)
-	{
-		drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
-		i=do_cmd(f_putcmd|f_lopsta|f_getsta|f_ResponseStatus);
-	}
-	else if (fam==2)
-	{
-		drvcmd[0]=CMD2_READ_ERR;
-		i=do_cmd(f_putcmd);
-	}
-	else return (-1);
-	return (i);
-}
-#endif
-/*==========================================================================*/
-static void __init ask_mail(void)
-{
-	int i;
-	
-	msg(DBG_INF, "please mail the following lines to emoenke@gwdg.de\n");
-	msg(DBG_INF, "(don't mail if you are not using the actual kernel):\n");
-	msg(DBG_INF, "%s\n", VERSION);
-	msg(DBG_INF, "address %03X, type %s, drive %s (ID %d)\n",
-	    CDo_command, type, current_drive->drive_model, current_drive->drv_id);
-	for (i=0;i<12;i++)
-		sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_INF,"infobuf =%s\n", msgbuf);
-	for (i=0;i<12;i++)
-		sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-	msgbuf[i*3]=0;
-	msg(DBG_INF,"infobuf =%s\n", msgbuf);
-}
-/*==========================================================================*/
-static int __init check_version(void)
-{
-	int i, j, l;
-	int teac_possible=0;
-	
-	msg(DBG_INI,"check_version: id=%d, d=%d.\n", current_drive->drv_id, current_drive - D_S);
-	current_drive->drv_type=0;
-
-	/* check for CR-52x, CR-56x, LCS-7260 and ECS-AT */
-	/* clear any pending error state */
-	clr_cmdbuf();
-	drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
-	response_count=9;
-	flags_cmd_out=f_putcmd;
-	i=cmd_out();
-	if (i<0) msg(DBG_INI,"CMD0_READ_ERR returns %d (ok anyway).\n",i);
-	/* read drive version */
-	clr_cmdbuf();
-	for (i=0;i<12;i++) infobuf[i]=0;
-	drvcmd[0]=CMD0_READ_VER; /* same as CMD1_ and CMDL_ */
-	response_count=12; /* fam1: only 11 */
-	flags_cmd_out=f_putcmd;
-	i=cmd_out();
-	if (i<-1) msg(DBG_INI,"CMD0_READ_VER returns %d\n",i);
-	if (i==-11) teac_possible++;
-	j=0;
-	for (i=0;i<12;i++) j+=infobuf[i];
-	if (j)
-	{
-		for (i=0;i<12;i++)
-			sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_ECS,"infobuf =%s\n", msgbuf);
-		for (i=0;i<12;i++)
-			sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_ECS,"infobuf =%s\n", msgbuf);
-	}
-	for (i=0;i<4;i++) if (infobuf[i]!=family1[i]) break;
-	if (i==4)
-	{
-		current_drive->drive_model[0]='C';
-		current_drive->drive_model[1]='R';
-		current_drive->drive_model[2]='-';
-		current_drive->drive_model[3]='5';
-		current_drive->drive_model[4]=infobuf[i++];
-		current_drive->drive_model[5]=infobuf[i++];
-		current_drive->drive_model[6]=0;
-		current_drive->drv_type=drv_fam1;
-	}
-	if (!current_drive->drv_type)
-	{
-		for (i=0;i<8;i++) if (infobuf[i]!=family0[i]) break;
-		if (i==8)
-		{
-			current_drive->drive_model[0]='C';
-			current_drive->drive_model[1]='R';
-			current_drive->drive_model[2]='-';
-			current_drive->drive_model[3]='5';
-			current_drive->drive_model[4]='2';
-			current_drive->drive_model[5]='x';
-			current_drive->drive_model[6]=0;
-			current_drive->drv_type=drv_fam0;
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		for (i=0;i<8;i++) if (infobuf[i]!=familyL[i]) break;
-		if (i==8)
-		{
-			for (j=0;j<8;j++)
-				current_drive->drive_model[j]=infobuf[j];
-			current_drive->drive_model[8]=0;
-			current_drive->drv_type=drv_famL;
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		for (i=0;i<6;i++) if (infobuf[i]!=familyV[i]) break;
-		if (i==6)
-		{
-			for (j=0;j<6;j++)
-				current_drive->drive_model[j]=infobuf[j];
-			current_drive->drive_model[6]=0;
-			current_drive->drv_type=drv_famV;
-			i+=2; /* 2 blanks before version */
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		/* check for CD200 */
-		clr_cmdbuf();
-		drvcmd[0]=CMD2_READ_ERR;
-		response_count=9;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) msg(DBG_INI,"CMD2_READERR returns %d (ok anyway).\n",i);
-		if (i<0) msg(DBG_000,"CMD2_READERR returns %d (ok anyway).\n",i);
-		/* read drive version */
-		clr_cmdbuf();
-		for (i=0;i<12;i++) infobuf[i]=0;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-#if 0
-		OUT(CDo_reset,0);
-		sbp_sleep(6*HZ);
-		OUT(CDo_enable,current_drive->drv_sel);
-#endif
-		drvcmd[0]=CMD2_READ_VER;
-		response_count=12;
-		flags_cmd_out=f_putcmd;
-		i=cmd_out();
-		if (i<0) msg(DBG_INI,"CMD2_READ_VER returns %d\n",i);
-		if (i==-7) teac_possible++;
-		j=0;
-		for (i=0;i<12;i++) j+=infobuf[i];
-		if (j)
-		{
-			for (i=0;i<12;i++)
-				sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-			for (i=0;i<12;i++)
-				sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
-			msgbuf[i*3]=0;
-			msg(DBG_IDX,"infobuf =%s\n", msgbuf);
-		}
-		if (i>=0)
-		{
-			for (i=0;i<5;i++) if (infobuf[i]!=family2[i]) break;
-			if (i==5)
-			{
-				current_drive->drive_model[0]='C';
-				current_drive->drive_model[1]='D';
-				current_drive->drive_model[2]='2';
-				current_drive->drive_model[3]='0';
-				current_drive->drive_model[4]='0';
-				current_drive->drive_model[5]=infobuf[i++];
-				current_drive->drive_model[6]=infobuf[i++];
-				current_drive->drive_model[7]=0;
-				current_drive->drv_type=drv_fam2;
-			}
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		/* check for TEAC CD-55A */
-		msg(DBG_TEA,"teac_possible: %d\n",teac_possible);
-		for (j=1;j<=((current_drive->drv_id==0)?3:1);j++)
-		{
-			for (l=1;l<=((current_drive->drv_id==0)?10:1);l++)
-			{
-				msg(DBG_TEA,"TEAC reset #%d-%d.\n", j, l);
-				if (sbpro_type==1) OUT(CDo_reset,0);
-				else
-				{
-					OUT(CDo_enable,current_drive->drv_sel);
-					OUT(CDo_sel_i_d,0);
-					OUT(CDo_command,CMDT_RESET);
-					for (i=0;i<9;i++) OUT(CDo_command,0);
-				}
-				sbp_sleep(5*HZ/10);
-				OUT(CDo_enable,current_drive->drv_sel);
-				OUT(CDo_sel_i_d,0);
-				i=inb(CDi_status);
-				msg(DBG_TEA,"TEAC CDi_status: %02X.\n",i);
-#if 0
-				if (i&s_not_result_ready) continue; /* drive not present or ready */
-#endif
-				i=inb(CDi_info);
-				msg(DBG_TEA,"TEAC CDi_info: %02X.\n",i);
-				if (i==0x55) break; /* drive found */
-			}
-			if (i==0x55) break; /* drive found */
-		}
-		if (i==0x55) /* drive found */
-		{
-			msg(DBG_TEA,"TEAC drive found.\n");
-			clr_cmdbuf();
-			flags_cmd_out=f_putcmd;
-			response_count=12;
-			drvcmd[0]=CMDT_READ_VER;
-			drvcmd[4]=response_count;
-			for (i=0;i<12;i++) infobuf[i]=0;
-			i=cmd_out_T();
-			if (i!=0) msg(DBG_TEA,"cmd_out_T(CMDT_READ_VER) returns %d.\n",i);
-			for (i=1;i<6;i++) if (infobuf[i]!=familyT[i-1]) break;
-			if (i==6)
-			{
-				current_drive->drive_model[0]='C';
-				current_drive->drive_model[1]='D';
-				current_drive->drive_model[2]='-';
-				current_drive->drive_model[3]='5';
-				current_drive->drive_model[4]='5';
-				current_drive->drive_model[5]=0;
-				current_drive->drv_type=drv_famT;
-			}
-		}
-	}
-	if (!current_drive->drv_type)
-	{
-		msg(DBG_TEA,"no drive found at address %03X under ID %d.\n",CDo_command,current_drive->drv_id);
-		return (-522);
-	}
-	for (j=0;j<4;j++) current_drive->firmware_version[j]=infobuf[i+j];
-	if (famL_drive)
-	{
-	  u_char lcs_firm_e1[]="A E1";
-	  u_char lcs_firm_f4[]="A4F4";
-		
-	  for (j=0;j<4;j++)
-	    if (current_drive->firmware_version[j]!=lcs_firm_e1[j]) break;
-	  if (j==4) current_drive->drv_type=drv_e1;
-	  
-	  for (j=0;j<4;j++)
-	    if (current_drive->firmware_version[j]!=lcs_firm_f4[j]) break;
-	  if (j==4) current_drive->drv_type=drv_f4;
-
-	  if (current_drive->drv_type==drv_famL) ask_mail();
-	}
-	else if (famT_drive)
-	{
-		j=infobuf[4]; /* one-byte version??? - here: 0x15 */
-		if (j=='5')
-		{
-			current_drive->firmware_version[0]=infobuf[7];
-			current_drive->firmware_version[1]=infobuf[8];
-			current_drive->firmware_version[2]=infobuf[10];
-			current_drive->firmware_version[3]=infobuf[11];
-		}
-		else
-		{
-			if (j!=0x15) ask_mail();
-			current_drive->firmware_version[0]='0';
-			current_drive->firmware_version[1]='.';
-			current_drive->firmware_version[2]='0'+(j>>4);
-			current_drive->firmware_version[3]='0'+(j&0x0f);
-		}
-	}
-	else /* CR-52x, CR-56x, CD200, ECS-AT */
-	{
-		j = (current_drive->firmware_version[0] & 0x0F) * 100 +
-			(current_drive->firmware_version[2] & 0x0F) *10 +
-				(current_drive->firmware_version[3] & 0x0F);
-		if (fam0_drive)
-		{
-			if (j<200) current_drive->drv_type=drv_199;
-			else if (j<201) current_drive->drv_type=drv_200;
-			else if (j<210) current_drive->drv_type=drv_201;
-			else if (j<211) current_drive->drv_type=drv_210;
-			else if (j<300) current_drive->drv_type=drv_211;
-			else if (j>=300) current_drive->drv_type=drv_300;
-		}
-		else if (fam1_drive)
-		{
-			if (j<100) current_drive->drv_type=drv_099;
-			else
-			{
-				current_drive->drv_type=drv_100;
-				if ((j!=500)&&(j!=102)) ask_mail();
-			}
-		}
-		else if (fam2_drive)
-		{
-			if (current_drive->drive_model[5]=='F')
-			{
-				if ((j!=1)&&(j!=35)&&(j!=200)&&(j!=210))
-				  ask_mail(); /* unknown version at time */
-			}
-			else
-			{
-				msg(DBG_INF,"this CD200 drive is not fully supported yet - only audio will work.\n");
-				if ((j!=101)&&(j!=35))
-				  ask_mail(); /* unknown version at time */
-			}
-		}
-		else if (famV_drive)
-		  {
-		    if ((j==100)||(j==150)) current_drive->drv_type=drv_at;
-		    ask_mail(); /* hopefully we get some feedback by this */
-		  }
-	}
-	msg(DBG_LCS,"drive type %02X\n",current_drive->drv_type);
-	msg(DBG_INI,"check_version done.\n");
-	return (0);
-}
-/*==========================================================================*/
-static void switch_drive(struct sbpcd_drive *p)
-{
-	current_drive = p;
-	OUT(CDo_enable,current_drive->drv_sel);
-	msg(DBG_DID,"drive %d (ID=%d) activated.\n",
-		current_drive - D_S, current_drive->drv_id);
-	return;
-}
-/*==========================================================================*/
-#ifdef PATH_CHECK
-/*
- * probe for the presence of an interface card
- */
-static int __init check_card(int port)
-{
-#undef N_RESPO
-#define N_RESPO 20
-	int i, j, k;
-	u_char response[N_RESPO];
-	u_char save_port0;
-	u_char save_port3;
-	
-	msg(DBG_INI,"check_card entered.\n");
-	save_port0=inb(port+0);
-	save_port3=inb(port+3);
-	
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		OUT(port+3,j) ; /* enable drive #j */
-		OUT(port+0,CMD0_PATH_CHECK);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=10000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
-		OUT(port+0,CMD0_PATH_CHECK);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0xFF;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=10000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
-
-		if (response[0]==0xAA)
-			if (response[1]==0x55)
-				return (0);
-	}
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		OUT(port+3,j) ; /* enable drive #j */
-		OUT(port+0,CMD2_READ_VER);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=1000000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
-		OUT(port+0,CMD2_READ_VER);
-		for (i=10;i>0;i--) OUT(port+0,0);
-		for (k=0;k<N_RESPO;k++) response[k]=0xFF;
-		for (k=0;k<N_RESPO;k++)
-		{
-			for (i=1000000;i>0;i--)
-			{
-				if (inb(port+1)&s_not_result_ready) continue;
-				response[k]=inb(port+0);
-				break;
-			}
-		}
-		for (i=0;i<N_RESPO;i++)
-			sprintf(&msgbuf[i*3], " %02X", response[i]);
-		msgbuf[i*3]=0;
-		msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
-
-		if (response[0]==0xAA)
-			if (response[1]==0x55)
-				return (0);
-	}
-	OUT(port+0,save_port0);
-	OUT(port+3,save_port3);
-	return (0); /* in any case - no real "function" at time */
-}
-#endif /* PATH_CHECK */ 
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * probe for the presence of drives on the selected controller
- */
-static int __init check_drives(void)
-{
-	int i, j;
-	
-	msg(DBG_INI,"check_drives entered.\n");
-	ndrives=0;
-	for (j=0;j<max_drives;j++)
-	{
-		struct sbpcd_drive *p = D_S + ndrives;
-		p->drv_id=j;
-		if (sbpro_type==1) p->drv_sel=(j&0x01)<<1|(j&0x02)>>1;
-		else p->drv_sel=j;
-		switch_drive(p);
-		msg(DBG_INI,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
-		msg(DBG_000,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
-		i=check_version();
-		if (i<0) msg(DBG_INI,"check_version returns %d.\n",i);
-		else
-		{
-			current_drive->drv_options=drv_pattern[j];
-			if (fam0L_drive) current_drive->drv_options&=~(speed_auto|speed_300|speed_150);
-			msg(DBG_INF, "Drive %d (ID=%d): %.9s (%.4s) at 0x%03X (type %d)\n",
-			    current_drive - D_S,
-			    current_drive->drv_id,
-			    current_drive->drive_model,
-			    current_drive->firmware_version,
-			    CDo_command,
-			    sbpro_type);
-			ndrives++;
-		}
-	}
-	for (j=ndrives;j<NR_SBPCD;j++) D_S[j].drv_id=-1;
-	if (ndrives==0) return (-1);
-	return (0);
-}
-/*==========================================================================*/
-#ifdef FUTURE
-/*
- *  obtain if requested service disturbs current audio state
- */            
-static int obey_audio_state(u_char audio_state, u_char func,u_char subfunc)
-{
-	switch (audio_state)                   /* audio status from controller  */
-	{
-	case aud_11: /* "audio play in progress" */
-	case audx11:
-		switch (func)                      /* DOS command code */
-		{
-		case cmd_07: /* input flush  */
-		case cmd_0d: /* open device  */
-		case cmd_0e: /* close device */
-		case cmd_0c: /* ioctl output */
-			return (1);
-		case cmd_03: /* ioctl input  */
-			switch (subfunc)
-				/* DOS ioctl input subfunction */
-			{
-			case cxi_00:
-			case cxi_06:
-			case cxi_09:
-				return (1);
-			default:
-				return (ERROR15);
-			}
-			return (1);
-		default:
-			return (ERROR15);
-		}
-		return (1);
-	case aud_12:                  /* "audio play paused"      */
-	case audx12:
-		return (1);
-	default:
-		return (2);
-	}
-}
-/*==========================================================================*/
-/* allowed is only
- * ioctl_o, flush_input, open_device, close_device, 
- * tell_address, tell_volume, tell_capabiliti,
- * tell_framesize, tell_CD_changed, tell_audio_posi
- */
-static int check_allowed1(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==ioctl_o) return (0);
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-	if (func1==audio_pause) return (-1);
-	if (func1==audio_resume) return (-1);
-	if (func1!=ioctl_i) return (0);
-	if (func2==tell_SubQ_run_tot) return (-1);
-	if (func2==tell_cdsize) return (-1);
-	if (func2==tell_TocDescrip) return (-1);
-	if (func2==tell_TocEntry) return (-1);
-	if (func2==tell_subQ_info) return (-1);
-	if (fam1_drive) if (func2==tell_SubChanInfo) return (-1);
-	if (func2==tell_UPC) return (-1);
-#else
-	return (0);
-#endif
-}
-/*==========================================================================*/
-static int check_allowed2(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-  if (func1!=ioctl_o) return (0);
-	if (fam1_drive)
-	{
-		if (func2==EjectDisk) return (-1);
-		if (func2==CloseTray) return (-1);
-	}
-#else
-	return (0);
-#endif
-}
-/*==========================================================================*/
-static int check_allowed3(u_char func1, u_char func2)
-{
-#if 000
-	if (func1==ioctl_i)
-	{
-		if (func2==tell_address) return (0);
-		if (func2==tell_capabiliti) return (0);
-		if (func2==tell_CD_changed) return (0);
-		if (fam0L_drive) if (func2==tell_SubChanInfo) return (0);
-		return (-1);
-	}
-	if (func1==ioctl_o)
-	{
-		if (func2==DriveReset) return (0);
-		if (fam0L_drive)
-		{
-			if (func2==EjectDisk) return (0);
-			if (func2==LockDoor) return (0);
-	  if (func2==CloseTray) return (0);
-		}
-		return (-1);
-    }
-	if (func1==flush_input) return (-1);
-	if (func1==read_long) return (-1);
-	if (func1==read_long_prefetch) return (-1);
-	if (func1==seek) return (-1);
-	if (func1==audio_play) return (-1);
-	if (func1==audio_pause) return (-1);
-	if (func1==audio_resume) return (-1);
-#else
-	return (0);
-#endif
-}
-/*==========================================================================*/
-static int seek_pos_audio_end(void)
-{
-	int i;
-
-	i=msf2blk(current_drive->pos_audio_end)-1;
-	if (i<0) return (-1);
-	i=cc_Seek(i,0);
-	return (i);
-}
-#endif /* FUTURE */ 
-/*==========================================================================*/
-static int ReadToC(void)
-{
-	int i, j;
-	current_drive->diskstate_flags &= ~toc_bit;
-	current_drive->ored_ctl_adr=0;
-	/* special handling of CD-I HE */
-	if ((current_drive->n_first_track == 2 && current_drive->n_last_track == 2) ||
-             current_drive->xa_byte == 0x10)
-        {
-		current_drive->TocBuffer[1].nixbyte=0;
-		current_drive->TocBuffer[1].ctl_adr=0x40;
-		current_drive->TocBuffer[1].number=1;
-		current_drive->TocBuffer[1].format=0;
-		current_drive->TocBuffer[1].address=blk2msf(0);
-		current_drive->ored_ctl_adr |= 0x40;
-		current_drive->n_first_track = 1;
-		current_drive->n_last_track = 1;
-		current_drive->xa_byte = 0x10;
-                j = 2;
-        } else
-	for (j=current_drive->n_first_track;j<=current_drive->n_last_track;j++)
-	{
-		i=cc_ReadTocEntry(j);
-		if (i<0)
-		{
-			msg(DBG_INF,"cc_ReadTocEntry(%d) returns %d.\n",j,i);
-			return (i);
-		}
-		current_drive->TocBuffer[j].nixbyte=current_drive->TocEnt_nixbyte;
-		current_drive->TocBuffer[j].ctl_adr=current_drive->TocEnt_ctl_adr;
-		current_drive->TocBuffer[j].number=current_drive->TocEnt_number;
-		current_drive->TocBuffer[j].format=current_drive->TocEnt_format;
-		current_drive->TocBuffer[j].address=current_drive->TocEnt_address;
-		current_drive->ored_ctl_adr |= current_drive->TocEnt_ctl_adr;
-	}
-	/* fake entry for LeadOut Track */
-	current_drive->TocBuffer[j].nixbyte=0;
-	current_drive->TocBuffer[j].ctl_adr=0;
-	current_drive->TocBuffer[j].number=CDROM_LEADOUT;
-	current_drive->TocBuffer[j].format=0;
-	current_drive->TocBuffer[j].address=current_drive->size_msf;
-	
-	current_drive->diskstate_flags |= toc_bit;
-	return (0);
-}
-/*==========================================================================*/
-static int DiskInfo(void)
-{
-	int i, j;
-	
-	current_drive->mode=READ_M1;
-	
-#undef LOOP_COUNT
-#define LOOP_COUNT 10 /* needed for some "old" drives */
-	
-	msg(DBG_000,"DiskInfo entered.\n");
-	for (j=1;j<LOOP_COUNT;j++)
-	{
-#if 0
-		i=SetSpeed();
-		if (i<0)
-		{
-			msg(DBG_INF,"DiskInfo: SetSpeed returns %d\n", i);
-			continue;
-		}
-		i=cc_ModeSense();
-		if (i<0)
-		{
-			msg(DBG_INF,"DiskInfo: cc_ModeSense returns %d\n", i);
-			continue;
-		}
-#endif
-		i=cc_ReadCapacity();
-		if (i>=0) break;
-		msg(DBG_INF,"DiskInfo: ReadCapacity #%d returns %d\n", j, i);
-#if 0
-		i=cc_DriveReset();
-#endif
-		if (!fam0_drive && j == 2) break;
-	}
-	if (j==LOOP_COUNT) return (-33); /* give up */
-	
-	i=cc_ReadTocDescr();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: ReadTocDescr returns %d\n", i);
-		return (i);
-	}
-	i=ReadToC();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: ReadToC returns %d\n", i);
-		return (i);
-	}
-	i=cc_CheckMultiSession();
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: cc_CheckMultiSession returns %d\n", i);
-		return (i);
-	}
-	if (current_drive->f_multisession) current_drive->sbp_bufsiz=1;  /* possibly a weird PhotoCD */
-	else current_drive->sbp_bufsiz=buffers;
-	i=cc_ReadTocEntry(current_drive->n_first_track);
-	if (i<0)
-	{
-		msg(DBG_INF,"DiskInfo: cc_ReadTocEntry(1) returns %d\n", i);
-		return (i);
-	}
-	i=cc_ReadUPC();
-	if (i<0) msg(DBG_INF,"DiskInfo: cc_ReadUPC returns %d\n", i);
-	if ((fam0L_drive) && (current_drive->xa_byte==0x20 || current_drive->xa_byte == 0x10))
-	{
-		/* XA disk with old drive */
-		cc_ModeSelect(CD_FRAMESIZE_RAW1);
-		cc_ModeSense();
-	}
-	if (famT_drive)	cc_prep_mode_T();
-	msg(DBG_000,"DiskInfo done.\n");
-	return (0);
-}
-
-static int sbpcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	int st;
-
-	if (CDSL_CURRENT != slot_nr) {
-		 /* we have no changer support */
-		 return -EINVAL;
-	}
-
-        cc_ReadStatus();
-	st=ResponseStatus();
-	if (st<0)
-	{
-		msg(DBG_INF,"sbpcd_drive_status: timeout.\n");
-		return (0);
-	}
-	msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
-	msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
-	msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
-	msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
-	msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
-	msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
-
-#if 0
-  if (!(p->status_bits & p_door_closed)) return CDS_TRAY_OPEN;
-  if (p->status_bits & p_disk_ok) return CDS_DISC_OK;
-  if (p->status_bits & p_disk_in) return CDS_DRIVE_NOT_READY;
-
-  return CDS_NO_DISC;
-#else
-  if (p->status_bits & p_spinning) return CDS_DISC_OK;
-/*  return CDS_TRAY_OPEN; */
-  return CDS_NO_DISC;
-  
-#endif
-
-}
-
-
-/*==========================================================================*/
-#ifdef FUTURE
-/*
- *  called always if driver gets entered
- *  returns 0 or ERROR2 or ERROR15
- */
-static int prepare(u_char func, u_char subfunc)
-{
-	int i;
-	
-	if (fam0L_drive)
-	{
-		i=inb(CDi_status);
-		if (i&s_attention) GetStatus();
-	}
-	else if (fam1_drive) GetStatus();
-	else if (fam2_drive) GetStatus();
-	else if (famT_drive) GetStatus();
-	if (current_drive->CD_changed==0xFF)
-	{
-		current_drive->diskstate_flags=0;
-		current_drive->audio_state=0;
-		if (!st_diskok)
-		{
-			i=check_allowed1(func,subfunc);
-			if (i<0) return (-2);
-		}
-		else 
-		{
-			i=check_allowed3(func,subfunc);
-			if (i<0)
-			{
-				current_drive->CD_changed=1;
-				return (-15);
-			}
-		}
-	}
-	else
-	{
-		if (!st_diskok)
-		{
-			current_drive->diskstate_flags=0;
-			current_drive->audio_state=0;
-			i=check_allowed1(func,subfunc);
-			if (i<0) return (-2);
-		}
-		else
-		{ 
-			if (st_busy)
-			{
-				if (current_drive->audio_state!=audio_pausing)
-				{
-					i=check_allowed2(func,subfunc);
-					if (i<0) return (-2);
-				}
-			}
-			else
-			{
-				if (current_drive->audio_state==audio_playing) seek_pos_audio_end();
-				current_drive->audio_state=0;
-			}
-			if (!frame_size_valid)
-			{
-				i=DiskInfo();
-				if (i<0)
-				{
-					current_drive->diskstate_flags=0;
-					current_drive->audio_state=0;
-					i=check_allowed1(func,subfunc);
-					if (i<0) return (-2);
-				}
-			}
-		}
-    }
-	return (0);
-}
-#endif /* FUTURE */ 
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * Check the results of the "get status" command.
- */
-static int sbp_status(void)
-{
-	int st;
-	
-	st=ResponseStatus();
-	if (st<0)
-	{
-		msg(DBG_INF,"sbp_status: timeout.\n");
-		return (0);
-	}
-	
-	if (!st_spinning) msg(DBG_SPI,"motor got off - ignoring.\n");
-	
-	if (st_check) 
-	{
-		msg(DBG_INF,"st_check detected - retrying.\n");
-		return (0);
-	}
-	if (!st_door_closed)
-	{
-		msg(DBG_INF,"door is open - retrying.\n");
-		return (0);
-	}
-	if (!st_caddy_in)
-	{
-		msg(DBG_INF,"disk removed - retrying.\n");
-		return (0);
-	}
-	if (!st_diskok) 
-	{
-		msg(DBG_INF,"!st_diskok detected - retrying.\n");
-		return (0);
-	}
-	if (st_busy) 
-	{
-		msg(DBG_INF,"st_busy detected - retrying.\n");
-		return (0);
-	}
-	return (1);
-}
-/*==========================================================================*/
-		
-static int sbpcd_get_last_session(struct cdrom_device_info *cdi, struct cdrom_multisession *ms_infp)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	ms_infp->addr_format = CDROM_LBA;
-	ms_infp->addr.lba    = p->lba_multi;
-	if (p->f_multisession)
-		ms_infp->xa_flag=1; /* valid redirection address */
-	else
-		ms_infp->xa_flag=0; /* invalid redirection address */
-
-	return  0;
-}
-
-static int sbpcd_audio_ioctl(struct cdrom_device_info *cdi, u_int cmd,
-		       void * arg)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	int i, st, j;
-	
-	msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08p)\n", cdi->name, cmd, arg);
-	if (p->drv_id==-1) {
-		msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
-		return (-ENXIO);             /* no such drive */
-	}
-	down(&ioctl_read_sem);
-	if (p != current_drive)
-		switch_drive(p);
-	
-	msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
-	switch (cmd) 		/* Sun-compatible */
-	{
-		
-	case CDROMPAUSE:     /* Pause the drive */
-		msg(DBG_IOC,"ioctl: CDROMPAUSE entered.\n");
-		/* pause the drive unit when it is currently in PLAY mode,         */
-		/* or reset the starting and ending locations when in PAUSED mode. */
-		/* If applicable, at the next stopping point it reaches            */
-		/* the drive will discontinue playing.                             */
-		switch (current_drive->audio_state)
-		{
-		case audio_playing:
-			if (famL_drive) i=cc_ReadSubQ();
-			else i=cc_Pause_Resume(1);
-			if (i<0) RETURN_UP(-EIO);
-			if (famL_drive) i=cc_Pause_Resume(1);
-			else i=cc_ReadSubQ();
-			if (i<0) RETURN_UP(-EIO);
-			current_drive->pos_audio_start=current_drive->SubQ_run_tot;
-			current_drive->audio_state=audio_pausing;
-			RETURN_UP(0);
-		case audio_pausing:
-			i=cc_Seek(current_drive->pos_audio_start,1);
-			if (i<0) RETURN_UP(-EIO);
-			RETURN_UP(0);
-		default:
-			RETURN_UP(-EINVAL);
-		}
-
-	case CDROMRESUME: /* resume paused audio play */
-		msg(DBG_IOC,"ioctl: CDROMRESUME entered.\n");
-		/* resume playing audio tracks when a previous PLAY AUDIO call has  */
-		/* been paused with a PAUSE command.                                */
-		/* It will resume playing from the location saved in SubQ_run_tot.  */
-		if (current_drive->audio_state!=audio_pausing) RETURN_UP(-EINVAL);
-		if (famL_drive)
-			i=cc_PlayAudio(current_drive->pos_audio_start,
-				       current_drive->pos_audio_end);
-		else i=cc_Pause_Resume(3);
-		if (i<0) RETURN_UP(-EIO);
-		current_drive->audio_state=audio_playing;
-		RETURN_UP(0);
-
-	case CDROMPLAYMSF:
-		msg(DBG_IOC,"ioctl: CDROMPLAYMSF entered.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		if (current_drive->audio_state==audio_playing)
-		{
-			i=cc_Pause_Resume(1);
-			if (i<0) RETURN_UP(-EIO);
-			i=cc_ReadSubQ();
-			if (i<0) RETURN_UP(-EIO);
-			current_drive->pos_audio_start=current_drive->SubQ_run_tot;
-			i=cc_Seek(current_drive->pos_audio_start,1);
-		}
-		memcpy(&msf, (void *) arg, sizeof(struct cdrom_msf));
-		/* values come as msf-bin */
-		current_drive->pos_audio_start = (msf.cdmsf_min0<<16) |
-                        (msf.cdmsf_sec0<<8) |
-				msf.cdmsf_frame0;
-		current_drive->pos_audio_end = (msf.cdmsf_min1<<16) |
-			(msf.cdmsf_sec1<<8) |
-				msf.cdmsf_frame1;
-		msg(DBG_IOX,"ioctl: CDROMPLAYMSF %08X %08X\n",
-		    current_drive->pos_audio_start,current_drive->pos_audio_end);
-		i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
-		if (i<0)
-		{
-			msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
-			DriveReset();
-			current_drive->audio_state=0;
-			RETURN_UP(-EIO);
-		}
-		current_drive->audio_state=audio_playing;
-		RETURN_UP(0);
-		
-	case CDROMPLAYTRKIND: /* Play a track.  This currently ignores index. */
-		msg(DBG_IOC,"ioctl: CDROMPLAYTRKIND entered.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		if (current_drive->audio_state==audio_playing)
-		{
-			msg(DBG_IOX,"CDROMPLAYTRKIND: already audio_playing.\n");
-#if 1
-			RETURN_UP(0); /* just let us play on */
-#else
-			RETURN_UP(-EINVAL); /* play on, but say "error" */
-#endif
-		}
-		memcpy(&ti,(void *) arg,sizeof(struct cdrom_ti));
-		msg(DBG_IOX,"ioctl: trk0: %d, ind0: %d, trk1:%d, ind1:%d\n",
-		    ti.cdti_trk0,ti.cdti_ind0,ti.cdti_trk1,ti.cdti_ind1);
-		if (ti.cdti_trk0<current_drive->n_first_track) RETURN_UP(-EINVAL);
-		if (ti.cdti_trk0>current_drive->n_last_track) RETURN_UP(-EINVAL);
-		if (ti.cdti_trk1<ti.cdti_trk0) ti.cdti_trk1=ti.cdti_trk0;
-		if (ti.cdti_trk1>current_drive->n_last_track) ti.cdti_trk1=current_drive->n_last_track;
-		current_drive->pos_audio_start=current_drive->TocBuffer[ti.cdti_trk0].address;
-		current_drive->pos_audio_end=current_drive->TocBuffer[ti.cdti_trk1+1].address;
-		i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
-		if (i<0)
-		{
-			msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
-			DriveReset();
-			current_drive->audio_state=0;
-			RETURN_UP(-EIO);
-		}
-		current_drive->audio_state=audio_playing;
-		RETURN_UP(0);
-		
-	case CDROMREADTOCHDR:        /* Read the table of contents header */
-		msg(DBG_IOC,"ioctl: CDROMREADTOCHDR entered.\n");
-		tochdr.cdth_trk0=current_drive->n_first_track;
-		tochdr.cdth_trk1=current_drive->n_last_track;
-		memcpy((void *) arg, &tochdr, sizeof(struct cdrom_tochdr));
-		RETURN_UP(0);
-		
-	case CDROMREADTOCENTRY:      /* Read an entry in the table of contents */
-		msg(DBG_IOC,"ioctl: CDROMREADTOCENTRY entered.\n");
-		memcpy(&tocentry, (void *) arg, sizeof(struct cdrom_tocentry));
-		i=tocentry.cdte_track;
-		if (i==CDROM_LEADOUT) i=current_drive->n_last_track+1;
-		else if (i<current_drive->n_first_track||i>current_drive->n_last_track)
-                  RETURN_UP(-EINVAL);
-		tocentry.cdte_adr=current_drive->TocBuffer[i].ctl_adr&0x0F;
-		tocentry.cdte_ctrl=(current_drive->TocBuffer[i].ctl_adr>>4)&0x0F;
-		tocentry.cdte_datamode=current_drive->TocBuffer[i].format;
-		if (tocentry.cdte_format==CDROM_MSF) /* MSF-bin required */
-		{
-			tocentry.cdte_addr.msf.minute=(current_drive->TocBuffer[i].address>>16)&0x00FF;
-			tocentry.cdte_addr.msf.second=(current_drive->TocBuffer[i].address>>8)&0x00FF;
-			tocentry.cdte_addr.msf.frame=current_drive->TocBuffer[i].address&0x00FF;
-		}
-		else if (tocentry.cdte_format==CDROM_LBA) /* blk required */
-			tocentry.cdte_addr.lba=msf2blk(current_drive->TocBuffer[i].address);
-		else RETURN_UP(-EINVAL);
-		memcpy((void *) arg, &tocentry, sizeof(struct cdrom_tocentry));
-		RETURN_UP(0);
-		
-	case CDROMSTOP:      /* Spin down the drive */
-		msg(DBG_IOC,"ioctl: CDROMSTOP entered.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */ 
-		i=cc_Pause_Resume(1);
-		current_drive->audio_state=0;
-#if 0
-		cc_DriveReset();
-#endif
-		RETURN_UP(i);
-
-	case CDROMSTART:  /* Spin up the drive */
-		msg(DBG_IOC,"ioctl: CDROMSTART entered.\n");
-		cc_SpinUp();
-		current_drive->audio_state=0;
-		RETURN_UP(0);
-
-	case CDROMVOLCTRL:   /* Volume control */
-		msg(DBG_IOC,"ioctl: CDROMVOLCTRL entered.\n");
-		memcpy(&volctrl,(char *) arg,sizeof(volctrl));
-		current_drive->vol_chan0=0;
-		current_drive->vol_ctrl0=volctrl.channel0;
-		current_drive->vol_chan1=1;
-		current_drive->vol_ctrl1=volctrl.channel1;
-		i=cc_SetVolume();
-		RETURN_UP(0);
-
-	case CDROMVOLREAD:   /* read Volume settings from drive */
-		msg(DBG_IOC,"ioctl: CDROMVOLREAD entered.\n");
-		st=cc_GetVolume();
-		if (st<0) RETURN_UP(st);
-		volctrl.channel0=current_drive->vol_ctrl0;
-		volctrl.channel1=current_drive->vol_ctrl1;
-		volctrl.channel2=0;
-		volctrl.channel2=0;
-		memcpy((void *)arg,&volctrl,sizeof(volctrl));
-		RETURN_UP(0);
-
-	case CDROMSUBCHNL:   /* Get subchannel info */
-		msg(DBG_IOS,"ioctl: CDROMSUBCHNL entered.\n");
-		/* Bogus, I can do better than this! --AJK
-		if ((st_spinning)||(!subq_valid)) {
-			i=cc_ReadSubQ();
-			if (i<0) RETURN_UP(-EIO);
-		}
-		*/
-		i=cc_ReadSubQ();
-		if (i<0) {
-			j=cc_ReadError(); /* clear out error status from drive */
-			current_drive->audio_state=CDROM_AUDIO_NO_STATUS;
-			/* get and set the disk state here,
-			probably not the right place, but who cares!
-			It makes it work properly! --AJK */
-			if (current_drive->CD_changed==0xFF) {
-				msg(DBG_000,"Disk changed detect\n");
-				current_drive->diskstate_flags &= ~cd_size_bit;
-			}
-			RETURN_UP(-EIO);
-		}
-		if (current_drive->CD_changed==0xFF) {
-			/* reread the TOC because the disk has changed! --AJK */
-			msg(DBG_000,"Disk changed STILL detected, rereading TOC!\n");
-			i=DiskInfo();
-			if(i==0) {
-				current_drive->CD_changed=0x00; /* cd has changed, procede, */
-				RETURN_UP(-EIO); /* and get TOC, etc on next try! --AJK */
-			} else {
-				RETURN_UP(-EIO); /* we weren't ready yet! --AJK */
-			}
-		}
-		memcpy(&SC, (void *) arg, sizeof(struct cdrom_subchnl));
-		/*
-			This virtual crap is very bogus!
-			It doesn't detect when the cd is done playing audio!
-			Lets do this right with proper hardware register reading!
-		*/
-		cc_ReadStatus();
-		i=ResponseStatus();
-		msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
-		msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
-		msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
-		msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
-		msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
-		msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
-		/* st_busy indicates if it's _ACTUALLY_ playing audio */
-		switch (current_drive->audio_state)
-		{
-		case audio_playing:
-			if(st_busy==0) {
-				/* CD has stopped playing audio --AJK */
-				current_drive->audio_state=audio_completed;
-				SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
-			} else {
-				SC.cdsc_audiostatus=CDROM_AUDIO_PLAY;
-			}
-			break;
-		case audio_pausing:
-			SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED;
-			break;
-		case audio_completed:
-			SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
-			break;
-		default:
-			SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS;
-			break;
-		}
-		SC.cdsc_adr=current_drive->SubQ_ctl_adr;
-		SC.cdsc_ctrl=current_drive->SubQ_ctl_adr>>4;
-		SC.cdsc_trk=bcd2bin(current_drive->SubQ_trk);
-		SC.cdsc_ind=bcd2bin(current_drive->SubQ_pnt_idx);
-		if (SC.cdsc_format==CDROM_LBA)
-		{
-			SC.cdsc_absaddr.lba=msf2blk(current_drive->SubQ_run_tot);
-			SC.cdsc_reladdr.lba=msf2blk(current_drive->SubQ_run_trk);
-		}
-		else /* not only if (SC.cdsc_format==CDROM_MSF) */
-		{
-			SC.cdsc_absaddr.msf.minute=(current_drive->SubQ_run_tot>>16)&0x00FF;
-			SC.cdsc_absaddr.msf.second=(current_drive->SubQ_run_tot>>8)&0x00FF;
-			SC.cdsc_absaddr.msf.frame=current_drive->SubQ_run_tot&0x00FF;
-			SC.cdsc_reladdr.msf.minute=(current_drive->SubQ_run_trk>>16)&0x00FF;
-			SC.cdsc_reladdr.msf.second=(current_drive->SubQ_run_trk>>8)&0x00FF;
-			SC.cdsc_reladdr.msf.frame=current_drive->SubQ_run_trk&0x00FF;
-		}
-		memcpy((void *) arg, &SC, sizeof(struct cdrom_subchnl));
-		msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n",
-		    SC.cdsc_format,SC.cdsc_audiostatus,
-		    SC.cdsc_adr,SC.cdsc_ctrl,
-		    SC.cdsc_trk,SC.cdsc_ind,
-		    SC.cdsc_absaddr,SC.cdsc_reladdr);
-		RETURN_UP(0);
-
-	default:
-		msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
-		RETURN_UP(-EINVAL);
-	} /* end switch(cmd) */
-}
-/*==========================================================================*/
-/*
- *  Take care of the different block sizes between cdrom and Linux.
- */
-static void sbp_transfer(struct request *req)
-{
-	long offs;
-
-	while ( (req->nr_sectors > 0) &&
-	       (req->sector/4 >= current_drive->sbp_first_frame) &&
-	       (req->sector/4 <= current_drive->sbp_last_frame) )
-	{
-		offs = (req->sector - current_drive->sbp_first_frame * 4) * 512;
-		memcpy(req->buffer, current_drive->sbp_buf + offs, 512);
-		req->nr_sectors--;
-		req->sector++;
-		req->buffer += 512;
-	}
-}
-/*==========================================================================*/
-/*
- *  special end_request for sbpcd to solve CURRENT==NULL bug. (GTL)
- *  GTL = Gonzalo Tornaria <tornaria@cmat.edu.uy>
- *
- *  This is a kludge so we don't need to modify end_request.
- *  We put the req we take out after INIT_REQUEST in the requests list,
- *  so that end_request will discard it.
- *
- *  The bug could be present in other block devices, perhaps we
- *  should modify INIT_REQUEST and end_request instead, and
- *  change every block device..
- *
- *  Could be a race here?? Could e.g. a timer interrupt schedule() us?
- *  If so, we should copy end_request here, and do it right.. (or
- *  modify end_request and the block devices).
- *
- *  In any case, the race here would be much small than it was, and
- *  I couldn't reproduce..
- *
- *  The race could be: suppose CURRENT==NULL. We put our req in the list,
- *  and we are scheduled. Other process takes over, and gets into
- *  do_sbpcd_request. It sees CURRENT!=NULL (it is == to our req), so
- *  proceeds. It ends, so CURRENT is now NULL.. Now we awake somewhere in
- *  end_request, but now CURRENT==NULL... oops!
- *
- */
-#undef DEBUG_GTL
-
-/*==========================================================================*/
-/*
- *  I/O request routine, called from Linux kernel.
- */
-static void do_sbpcd_request(request_queue_t * q)
-{
-	u_int block;
-	u_int nsect;
-	int status_tries, data_tries;
-	struct request *req;
-	struct sbpcd_drive *p;
-#ifdef DEBUG_GTL
-	static int xx_nr=0;
-	int xnr;
-#endif
-
- request_loop:
-#ifdef DEBUG_GTL
-	xnr=++xx_nr;
-
-	req = elv_next_request(q);
-
-	if (!req)
-	{
-		printk( "do_sbpcd_request[%di](NULL), Pid:%d, Time:%li\n",
-			xnr, current->pid, jiffies);
-		printk( "do_sbpcd_request[%do](NULL) end 0 (null), Time:%li\n",
-			xnr, jiffies);
-		return;
-	}
-
-	printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n",
-		xnr, req, req->sector, req->nr_sectors, current->pid, jiffies);
-#endif
-
-	req = elv_next_request(q);	/* take out our request so no other */
-	if (!req)
-		return;
-
-	if (req -> sector == -1)
-		end_request(req, 0);
-	spin_unlock_irq(q->queue_lock);
-
-	down(&ioctl_read_sem);
-	if (rq_data_dir(elv_next_request(q)) != READ)
-	{
-		msg(DBG_INF, "bad cmd %d\n", req->cmd[0]);
-		goto err_done;
-	}
-	p = req->rq_disk->private_data;
-#if OLD_BUSY
-	while (busy_audio) sbp_sleep(HZ); /* wait a bit */
-	busy_data=1;
-#endif /* OLD_BUSY */
-
-	if (p->audio_state==audio_playing) goto err_done;
-	if (p != current_drive)
-		switch_drive(p);
-
-	block = req->sector; /* always numbered as 512-byte-pieces */
-	nsect = req->nr_sectors; /* always counted as 512-byte-pieces */
-
-	msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect);
-#if 0
-	msg(DBG_MUL,"read LBA %d\n", block/4);
-#endif
-
-	sbp_transfer(req);
-	/* if we satisfied the request from the buffer, we're done. */
-	if (req->nr_sectors == 0)
-	{
-#ifdef DEBUG_GTL
-		printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 2, Time:%li\n",
-			xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
-		up(&ioctl_read_sem);
-		spin_lock_irq(q->queue_lock);
-		end_request(req, 1);
-		goto request_loop;
-	}
-
-#ifdef FUTURE
-	i=prepare(0,0); /* at moment not really a hassle check, but ... */
-	if (i!=0)
-		msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i);
-#endif /* FUTURE */
-
-	if (!st_spinning) cc_SpinUp();
-
-	for (data_tries=n_retries; data_tries > 0; data_tries--)
-	{
-		for (status_tries=3; status_tries > 0; status_tries--)
-		{
-			flags_cmd_out |= f_respo3;
-			cc_ReadStatus();
-			if (sbp_status() != 0) break;
-			if (st_check) cc_ReadError();
-			sbp_sleep(1);    /* wait a bit, try again */
-		}
-		if (status_tries == 0)
-		{
-			msg(DBG_INF,"sbp_status: failed after 3 tries in line %d\n", __LINE__);
-			break;
-		}
-		
-		sbp_read_cmd(req);
-		sbp_sleep(0);
-		if (sbp_data(req) != 0)
-		{
-#ifdef SAFE_MIXED
-			current_drive->has_data=2; /* is really a data disk */
-#endif /* SAFE_MIXED */
-#ifdef DEBUG_GTL
-			printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 3, Time:%li\n",
-				xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
-			up(&ioctl_read_sem);
-			spin_lock_irq(q->queue_lock);
-			end_request(req, 1);
-			goto request_loop;
-		}
-	}
-
- err_done:
-#if OLD_BUSY
-	busy_data=0;
-#endif /* OLD_BUSY */
-#ifdef DEBUG_GTL
-	printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 4 (error), Time:%li\n",
-		xnr, req, req->sector, req->nr_sectors, jiffies);
-#endif
-	up(&ioctl_read_sem);
-	sbp_sleep(0);    /* wait a bit, try again */
-	spin_lock_irq(q->queue_lock);
-	end_request(req, 0);
-	goto request_loop;
-}
-/*==========================================================================*/
-/*
- *  build and send the READ command.
- */
-static void sbp_read_cmd(struct request *req)
-{
-#undef OLD
-
-	int i;
-	int block;
-
-	current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1;      /* purge buffer */
-	current_drive->sbp_current = 0;
-	block=req->sector/4;
-	if (block+current_drive->sbp_bufsiz <= current_drive->CDsize_frm)
-		current_drive->sbp_read_frames = current_drive->sbp_bufsiz;
-	else
-	{
-		current_drive->sbp_read_frames=current_drive->CDsize_frm-block;
-		/* avoid reading past end of data */
-		if (current_drive->sbp_read_frames < 1)
-		{
-			msg(DBG_INF,"requested frame %d, CD size %d ???\n",
-			    block, current_drive->CDsize_frm);
-			current_drive->sbp_read_frames=1;
-		}
-	}
-
-	flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
-	clr_cmdbuf();
-	if (famV_drive)
-	  {
-	    drvcmd[0]=CMDV_READ;
-	    lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
-	    bin2bcdx(&drvcmd[1]);
-	    bin2bcdx(&drvcmd[2]);
-	    bin2bcdx(&drvcmd[3]);
-	    drvcmd[4]=current_drive->sbp_read_frames>>8;
-	    drvcmd[5]=current_drive->sbp_read_frames&0xff;
-	    drvcmd[6]=0x02; /* flag "msf-bcd" */
-	}
-	else if (fam0L_drive)
-	{
-		flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
-		if (current_drive->xa_byte==0x20)
-		{
-			cmd_type=READ_M2;
-			drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
-			drvcmd[1]=(block>>16)&0x0ff;
-			drvcmd[2]=(block>>8)&0x0ff;
-			drvcmd[3]=block&0x0ff;
-			drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
-			drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
-		}
-		else
-		{
-			drvcmd[0]=CMD0_READ; /* "read frames", old drives */
-			if (current_drive->drv_type>=drv_201)
-			{
-				lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
-				bin2bcdx(&drvcmd[1]);
-				bin2bcdx(&drvcmd[2]);
-				bin2bcdx(&drvcmd[3]);
-			}
-			else
-			{
-				drvcmd[1]=(block>>16)&0x0ff;
-				drvcmd[2]=(block>>8)&0x0ff;
-				drvcmd[3]=block&0x0ff;
-			}
-			drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
-			drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
-			drvcmd[6]=(current_drive->drv_type<drv_201)?0:2; /* flag "lba or msf-bcd format" */
-		}
-	}
-	else if (fam1_drive)
-	{
-		drvcmd[0]=CMD1_READ;
-		lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-		drvcmd[5]=(current_drive->sbp_read_frames>>8)&0x0ff;
-		drvcmd[6]=current_drive->sbp_read_frames&0x0ff;
-	}
-	else if (fam2_drive)
-	{
-		drvcmd[0]=CMD2_READ;
-		lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-		drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
-		drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
-		drvcmd[6]=0x02;
-	}
-	else if (famT_drive)
-	{
-		drvcmd[0]=CMDT_READ;
-		drvcmd[2]=(block>>24)&0x0ff;
-		drvcmd[3]=(block>>16)&0x0ff;
-		drvcmd[4]=(block>>8)&0x0ff;
-		drvcmd[5]=block&0x0ff;
-		drvcmd[7]=(current_drive->sbp_read_frames>>8)&0x0ff;
-		drvcmd[8]=current_drive->sbp_read_frames&0x0ff;
-	}
-	flags_cmd_out=f_putcmd;
-	response_count=0;
-	i=cmd_out();
-	if (i<0) msg(DBG_INF,"error giving READ command: %0d\n", i);
-	return;
-}
-/*==========================================================================*/
-/*
- *  Check the completion of the read-data command.  On success, read
- *  the current_drive->sbp_bufsiz * 2048 bytes of data from the disk into buffer.
- */
-static int sbp_data(struct request *req)
-{
-	int i=0, j=0, l, frame;
-	u_int try=0;
-	u_long timeout;
-	u_char *p;
-	u_int data_tries = 0;
-	u_int data_waits = 0;
-	u_int data_retrying = 0;
-	int error_flag;
-	int xa_count;
-	int max_latency;
-	int success;
-	int wait;
-	int duration;
-
-	error_flag=0;
-	success=0;
-#if LONG_TIMING
-	max_latency=9*HZ;
-#else
-	if (current_drive->f_multisession) max_latency=15*HZ;
-	else max_latency=5*HZ;
-#endif
-	duration=jiffies;
-	for (frame=0;frame<current_drive->sbp_read_frames&&!error_flag; frame++)
-	{
-		SBPCD_CLI;
-
-		del_timer(&data_timer);
-		data_timer.expires=jiffies+max_latency;
-		timed_out_data=0;
-		add_timer(&data_timer);
-		while (!timed_out_data)
-		{
-			if (current_drive->f_multisession) try=maxtim_data*4;
-			else try=maxtim_data;
-			msg(DBG_000,"sbp_data: CDi_status loop: try=%d.\n",try);
-			for ( ; try!=0;try--)
-			{
-				j=inb(CDi_status);
-				if (!(j&s_not_data_ready)) break;
-				if (!(j&s_not_result_ready)) break;
-				if (fam0LV_drive) if (j&s_attention) break;
-			}
-			if (!(j&s_not_data_ready)) goto data_ready;
-			if (try==0)
-			{
-				if (data_retrying == 0) data_waits++;
-				data_retrying = 1;
-				msg(DBG_000,"sbp_data: CDi_status loop: sleeping.\n");
-				sbp_sleep(1);
-				try = 1;
-			}
-		}
-		msg(DBG_INF,"sbp_data: CDi_status loop expired.\n");
-	data_ready:
-		del_timer(&data_timer);
-
-		if (timed_out_data)
-		{
-			msg(DBG_INF,"sbp_data: CDi_status timeout (timed_out_data) (%02X).\n", j);
-			error_flag++;
-		}
-		if (try==0)
-		{
-			msg(DBG_INF,"sbp_data: CDi_status timeout (try=0) (%02X).\n", j);
-			error_flag++;
-		}
-		if (!(j&s_not_result_ready))
-		{
-			msg(DBG_INF, "sbp_data: RESULT_READY where DATA_READY awaited (%02X).\n", j);
-			response_count=20;
-			j=ResponseInfo();
-			j=inb(CDi_status);
-		}
-		if (j&s_not_data_ready)
-		{
-			if ((current_drive->ored_ctl_adr&0x40)==0)
-				msg(DBG_INF, "CD contains no data tracks.\n");
-			else msg(DBG_INF, "sbp_data: DATA_READY timeout (%02X).\n", j);
-			error_flag++;
-		}
-		SBPCD_STI;
-		if (error_flag) break;
-
-		msg(DBG_000, "sbp_data: beginning to read.\n");
-		p = current_drive->sbp_buf + frame *  CD_FRAMESIZE;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-		if (cmd_type==READ_M2) {
-                        if (do_16bit) insw(CDi_data, xa_head_buf, CD_XA_HEAD>>1);
-                        else insb(CDi_data, xa_head_buf, CD_XA_HEAD);
-		}
-		if (do_16bit) insw(CDi_data, p, CD_FRAMESIZE>>1);
-		else insb(CDi_data, p, CD_FRAMESIZE);
-		if (cmd_type==READ_M2) {
-                        if (do_16bit) insw(CDi_data, xa_tail_buf, CD_XA_TAIL>>1);
-                        else insb(CDi_data, xa_tail_buf, CD_XA_TAIL);
-		}
-		current_drive->sbp_current++;
-		if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-		if (cmd_type==READ_M2)
-		{
-			for (xa_count=0;xa_count<CD_XA_HEAD;xa_count++)
-				sprintf(&msgbuf[xa_count*3], " %02X", xa_head_buf[xa_count]);
-			msgbuf[xa_count*3]=0;
-			msg(DBG_XA1,"xa head:%s\n", msgbuf);
-		}
-		data_retrying = 0;
-		data_tries++;
-		if (data_tries >= 1000)
-		{
-			msg(DBG_INF,"sbp_data() statistics: %d waits in %d frames.\n", data_waits, data_tries);
-			data_waits = data_tries = 0;
-		}
-	}
-	duration=jiffies-duration;
-	msg(DBG_TEA,"time to read %d frames: %d jiffies .\n",frame,duration);
-	if (famT_drive)
-	{
-		wait=8;
-		do
-		{
-			if (teac==2)
-                          {
-                            if ((i=CDi_stat_loop_T()) == -1) break;
-                          }
-                        else
-                          {
-                            sbp_sleep(1);
-                            OUT(CDo_sel_i_d,0);
-                            i=inb(CDi_status);
-                          }
-			if (!(i&s_not_data_ready))
-			{
-				OUT(CDo_sel_i_d,1);
-				j=0;
-				do
-				{
-					if (do_16bit) i=inw(CDi_data);
-					else i=inb(CDi_data);
-					j++;
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_data_ready));
-				msg(DBG_TEA, "==========too much data (%d bytes/words)==============.\n", j);
-			}
-			if (!(i&s_not_result_ready))
-			{
-				OUT(CDo_sel_i_d,0);
-				l=0;
-				do
-				{
-					infobuf[l++]=inb(CDi_info);
-					i=inb(CDi_status);
-				}
-				while (!(i&s_not_result_ready));
-				if (infobuf[0]==0x00) success=1;
-#if 1
-				for (j=0;j<l;j++) sprintf(&msgbuf[j*3], " %02X", infobuf[j]);
-				msgbuf[j*3]=0;
-				msg(DBG_TEA,"sbp_data info response:%s\n", msgbuf);
-#endif
-				if (infobuf[0]==0x02)
-				{
-					error_flag++;
-					do
-					{
-						++recursion;
-						if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (sbp_data): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n",recursion);
-						else msg(DBG_TEA,"sbp_data: CMDT_READ_ERR necessary.\n");
-						clr_cmdbuf();
-						drvcmd[0]=CMDT_READ_ERR;
-						j=cmd_out_T(); /* !!! recursive here !!! */
-						--recursion;
-						sbp_sleep(1);
-					}
-					while (j<0);
-					current_drive->error_state=infobuf[2];
-					current_drive->b3=infobuf[3];
-					current_drive->b4=infobuf[4];
-				}
-				break;
-			}
-			else
-			{
-#if 0
-				msg(DBG_TEA, "============= waiting for result=================.\n");
-				sbp_sleep(1);
-#endif
-			}
-		}
-		while (wait--);
-	}
-
-	if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
-	{
-		msg(DBG_TEA, "================error flag: %d=================.\n", error_flag);
-		msg(DBG_INF,"sbp_data: read aborted by drive.\n");
-#if 1
-		i=cc_DriveReset(); /* ugly fix to prevent a hang */
-#else
-		i=cc_ReadError();
-#endif
-		return (0);
-	}
-	
-	if (fam0LV_drive)
-	{
-		SBPCD_CLI;
-		i=maxtim_data;
-		for (timeout=jiffies+HZ; time_before(jiffies, timeout); timeout--)
-		{
-			for ( ;i!=0;i--)
-			{
-				j=inb(CDi_status);
-				if (!(j&s_not_data_ready)) break;
-				if (!(j&s_not_result_ready)) break;
-				if (j&s_attention) break;
-			}
-			if (i != 0 || time_after_eq(jiffies, timeout)) break;
-			sbp_sleep(0);
-			i = 1;
-		}
-		if (i==0) msg(DBG_INF,"status timeout after READ.\n");
-		if (!(j&s_attention))
-		{
-			msg(DBG_INF,"sbp_data: timeout waiting DRV_ATTN - retrying.\n");
-			i=cc_DriveReset();  /* ugly fix to prevent a hang */
-			SBPCD_STI;
-			return (0);
-		}
-		SBPCD_STI;
-	}
-
-#if 0
-	if (!success)
-#endif
-		do
-		{
-			if (fam0LV_drive) cc_ReadStatus();
-#if 1
-			if (famT_drive) msg(DBG_TEA, "================before ResponseStatus=================.\n", i);
-#endif
-			i=ResponseStatus();  /* builds status_bits, returns orig. status (old) or faked p_success (new) */
-#if 1
-			if (famT_drive)	msg(DBG_TEA, "================ResponseStatus: %d=================.\n", i);
-#endif
-			if (i<0)
-			{
-				msg(DBG_INF,"bad cc_ReadStatus after read: %02X\n", current_drive->status_bits);
-				return (0);
-			}
-		}
-		while ((fam0LV_drive)&&(!st_check)&&(!(i&p_success)));
-	if (st_check)
-	{
-		i=cc_ReadError();
-		msg(DBG_INF,"cc_ReadError was necessary after read: %d\n",i);
-		return (0);
-	}
-	if (fatal_err)
-	{
-		fatal_err=0;
-		current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1;      /* purge buffer */
-		current_drive->sbp_current = 0;
-		msg(DBG_INF,"sbp_data: fatal_err - retrying.\n");
-		return (0);
-	}
-	
-	current_drive->sbp_first_frame = req -> sector / 4;
-	current_drive->sbp_last_frame = current_drive->sbp_first_frame + current_drive->sbp_read_frames - 1;
-	sbp_transfer(req);
-	return (1);
-}
-/*==========================================================================*/
-
-static int sbpcd_block_open(struct inode *inode, struct file *file)
-{
-	struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_open(p->sbpcd_infop, inode, file);
-}
-
-static int sbpcd_block_release(struct inode *inode, struct file *file)
-{
-	struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
-	return cdrom_release(p->sbpcd_infop, file);
-}
-
-static int sbpcd_block_ioctl(struct inode *inode, struct file *file,
-				unsigned cmd, unsigned long arg)
-{
-	struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
-	struct cdrom_device_info *cdi = p->sbpcd_infop;
-	int ret, i;
-
-	ret = cdrom_ioctl(file, p->sbpcd_infop, inode, cmd, arg);
-	if (ret != -ENOSYS)
-		return ret;
-
-	msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08lX)\n", cdi->name, cmd, arg);
-	if (p->drv_id==-1) {
-		msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
-		return (-ENXIO);             /* no such drive */
-	}
-	down(&ioctl_read_sem);
-	if (p != current_drive)
-		switch_drive(p);
-	
-	msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
-	switch (cmd) 		/* Sun-compatible */
-	{
-	case DDIOCSDBG:		/* DDI Debug */
-		if (!capable(CAP_SYS_ADMIN)) RETURN_UP(-EPERM);
-		i=sbpcd_dbg_ioctl(arg,1);
-		RETURN_UP(i);
-	case CDROMRESET:      /* hard reset the drive */
-		msg(DBG_IOC,"ioctl: CDROMRESET entered.\n");
-		i=DriveReset();
-		current_drive->audio_state=0;
-		RETURN_UP(i);
-
-	case CDROMREADMODE1:
-		msg(DBG_IOC,"ioctl: CDROMREADMODE1 requested.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		cc_ModeSelect(CD_FRAMESIZE);
-		cc_ModeSense();
-		current_drive->mode=READ_M1;
-		RETURN_UP(0);
-
-	case CDROMREADMODE2: /* not usable at the moment */
-		msg(DBG_IOC,"ioctl: CDROMREADMODE2 requested.\n");
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		cc_ModeSelect(CD_FRAMESIZE_RAW1);
-		cc_ModeSense();
-		current_drive->mode=READ_M2;
-		RETURN_UP(0);
-
-	case CDROMAUDIOBUFSIZ: /* configure the audio buffer size */
-		msg(DBG_IOC,"ioctl: CDROMAUDIOBUFSIZ entered.\n");
-		if (current_drive->sbp_audsiz>0)
-			vfree(current_drive->aud_buf);
-		current_drive->aud_buf=NULL;
-		current_drive->sbp_audsiz=arg;
-
-		if (current_drive->sbp_audsiz>16)
-		{
-			current_drive->sbp_audsiz = 0;
-			RETURN_UP(current_drive->sbp_audsiz);
-		}
-	
-		if (current_drive->sbp_audsiz>0)
-		{
-			current_drive->aud_buf=(u_char *) vmalloc(current_drive->sbp_audsiz*CD_FRAMESIZE_RAW);
-			if (current_drive->aud_buf==NULL)
-			{
-				msg(DBG_INF,"audio buffer (%d frames) not available.\n",current_drive->sbp_audsiz);
-				current_drive->sbp_audsiz=0;
-			}
-			else msg(DBG_INF,"audio buffer size: %d frames.\n",current_drive->sbp_audsiz);
-		}
-		RETURN_UP(current_drive->sbp_audsiz);
-
-	case CDROMREADAUDIO:
-	{ /* start of CDROMREADAUDIO */
-		int i=0, j=0, frame, block=0;
-		u_int try=0;
-		u_long timeout;
-		u_char *p;
-		u_int data_tries = 0;
-		u_int data_waits = 0;
-		u_int data_retrying = 0;
-		int status_tries;
-		int error_flag;
-
-		msg(DBG_IOC,"ioctl: CDROMREADAUDIO entered.\n");
-		if (fam0_drive) RETURN_UP(-EINVAL);
-		if (famL_drive) RETURN_UP(-EINVAL);
-		if (famV_drive) RETURN_UP(-EINVAL);
-		if (famT_drive) RETURN_UP(-EINVAL);
-#ifdef SAFE_MIXED
-		if (current_drive->has_data>1) RETURN_UP(-EBUSY);
-#endif /* SAFE_MIXED */
-		if (current_drive->aud_buf==NULL) RETURN_UP(-EINVAL);
-		if (copy_from_user(&read_audio, (void __user *)arg,
-				   sizeof(struct cdrom_read_audio)))
-			RETURN_UP(-EFAULT);
-		if (read_audio.nframes < 0 || read_audio.nframes>current_drive->sbp_audsiz) RETURN_UP(-EINVAL);
-		if (!access_ok(VERIFY_WRITE, read_audio.buf,
-			      read_audio.nframes*CD_FRAMESIZE_RAW))
-                	RETURN_UP(-EFAULT);
-
-		if (read_audio.addr_format==CDROM_MSF) /* MSF-bin specification of where to start */
-			block=msf2lba(&read_audio.addr.msf.minute);
-		else if (read_audio.addr_format==CDROM_LBA) /* lba specification of where to start */
-			block=read_audio.addr.lba;
-		else RETURN_UP(-EINVAL);
-#if 000
-		i=cc_SetSpeed(speed_150,0,0);
-		if (i) msg(DBG_AUD,"read_audio: SetSpeed error %d\n", i);
-#endif
-		msg(DBG_AUD,"read_audio: lba: %d, msf: %06X\n",
-		    block, blk2msf(block));
-		msg(DBG_AUD,"read_audio: before cc_ReadStatus.\n");
-#if OLD_BUSY
-		while (busy_data) sbp_sleep(HZ/10); /* wait a bit */
-		busy_audio=1;
-#endif /* OLD_BUSY */
-		error_flag=0;
-		for (data_tries=5; data_tries>0; data_tries--)
-		{
-			msg(DBG_AUD,"data_tries=%d ...\n", data_tries);
-			current_drive->mode=READ_AU;
-			cc_ModeSelect(CD_FRAMESIZE_RAW);
-			cc_ModeSense();
-			for (status_tries=3; status_tries > 0; status_tries--)
-			{
-				flags_cmd_out |= f_respo3;
-				cc_ReadStatus();
-				if (sbp_status() != 0) break;
-				if (st_check) cc_ReadError();
-				sbp_sleep(1);    /* wait a bit, try again */
-			}
-			if (status_tries == 0)
-			{
-				msg(DBG_AUD,"read_audio: sbp_status: failed after 3 tries in line %d.\n", __LINE__);
-				continue;
-			}
-			msg(DBG_AUD,"read_audio: sbp_status: ok.\n");
-
-			flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
-			if (fam0L_drive)
-			{
-				flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
-				cmd_type=READ_M2;
-				drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
-				drvcmd[1]=(block>>16)&0x000000ff;
-				drvcmd[2]=(block>>8)&0x000000ff;
-				drvcmd[3]=block&0x000000ff;
-				drvcmd[4]=0;
-				drvcmd[5]=read_audio.nframes; /* # of frames */
-				drvcmd[6]=0;
-			}
-			else if (fam1_drive)
-			{
-				drvcmd[0]=CMD1_READ; /* "read frames", new drives */
-				lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-				drvcmd[4]=0;
-				drvcmd[5]=0;
-				drvcmd[6]=read_audio.nframes; /* # of frames */
-			}
-			else if (fam2_drive)
-			{
-				drvcmd[0]=CMD2_READ_XA2;
-				lba2msf(block,&drvcmd[1]); /* msf-bin format required */
-				drvcmd[4]=0;
-				drvcmd[5]=read_audio.nframes; /* # of frames */
-				drvcmd[6]=0x11; /* raw mode */
-			}
-			else if (famT_drive) /* CD-55A: not tested yet */
-			{
-			}
-			msg(DBG_AUD,"read_audio: before giving \"read\" command.\n");
-			flags_cmd_out=f_putcmd;
-			response_count=0;
-			i=cmd_out();
-			if (i<0) msg(DBG_INF,"error giving READ AUDIO command: %0d\n", i);
-			sbp_sleep(0);
-			msg(DBG_AUD,"read_audio: after giving \"read\" command.\n");
-			for (frame=1;frame<2 && !error_flag; frame++)
-			{
-				try=maxtim_data;
-				for (timeout=jiffies+9*HZ; ; )
-				{
-					for ( ; try!=0;try--)
-					{
-						j=inb(CDi_status);
-						if (!(j&s_not_data_ready)) break;
-						if (!(j&s_not_result_ready)) break;
-						if (fam0L_drive) if (j&s_attention) break;
-					}
-					if (try != 0 || time_after_eq(jiffies, timeout)) break;
-					if (data_retrying == 0) data_waits++;
-					data_retrying = 1;
-					sbp_sleep(1);
-					try = 1;
-				}
-				if (try==0)
-				{
-					msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n");
-					error_flag++;
-					break;
-				}
-				msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n");
-				if (j&s_not_data_ready)
-				{
-					msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n");
-					error_flag++;
-					break;
-				}
-				msg(DBG_AUD,"read_audio: before reading data.\n");
-				error_flag=0;
-				p = current_drive->aud_buf;
-				if (sbpro_type==1) OUT(CDo_sel_i_d,1);
-				if (do_16bit)
-				{
-					u_short *p2 = (u_short *) p;
-
-					for (; (u_char *) p2 < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
-				  	{
-						if ((inb_p(CDi_status)&s_not_data_ready)) continue;
-
-						/* get one sample */
-						*p2++ = inw_p(CDi_data);
-						*p2++ = inw_p(CDi_data);
-					}
-				} else {
-					for (; p < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
-				  	{
-						if ((inb_p(CDi_status)&s_not_data_ready)) continue;
-
-						/* get one sample */
-						*p++ = inb_p(CDi_data);
-						*p++ = inb_p(CDi_data);
-						*p++ = inb_p(CDi_data);
-						*p++ = inb_p(CDi_data);
-					}
-				}
-				if (sbpro_type==1) OUT(CDo_sel_i_d,0);
-				data_retrying = 0;
-			}
-			msg(DBG_AUD,"read_audio: after reading data.\n");
-			if (error_flag)    /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
-			{
-				msg(DBG_AUD,"read_audio: read aborted by drive\n");
-#if 0000
-				i=cc_DriveReset();                /* ugly fix to prevent a hang */
-#else
-				i=cc_ReadError();
-#endif
-				continue;
-			}
-			if (fam0L_drive)
-			{
-				i=maxtim_data;
-				for (timeout=jiffies+9*HZ; time_before(jiffies, timeout); timeout--)
-				{
-					for ( ;i!=0;i--)
-					{
-						j=inb(CDi_status);
-						if (!(j&s_not_data_ready)) break;
-						if (!(j&s_not_result_ready)) break;
-						if (j&s_attention) break;
-					}
-					if (i != 0 || time_after_eq(jiffies, timeout)) break;
-					sbp_sleep(0);
-					i = 1;
-				}
-				if (i==0) msg(DBG_AUD,"read_audio: STATUS TIMEOUT AFTER READ");
-				if (!(j&s_attention))
-				{
-					msg(DBG_AUD,"read_audio: sbp_data: timeout waiting DRV_ATTN - retrying\n");
-					i=cc_DriveReset();  /* ugly fix to prevent a hang */
-					continue;
-				}
-			}
-			do
-			{
-				if (fam0L_drive) cc_ReadStatus();
-				i=ResponseStatus();  /* builds status_bits, returns orig. status (old) or faked p_success (new) */
-				if (i<0) { msg(DBG_AUD,
-					       "read_audio: cc_ReadStatus error after read: %02X\n",
-					       current_drive->status_bits);
-					   continue; /* FIXME */
-				   }
-			}
-			while ((fam0L_drive)&&(!st_check)&&(!(i&p_success)));
-			if (st_check)
-			{
-				i=cc_ReadError();
-				msg(DBG_AUD,"read_audio: cc_ReadError was necessary after read: %02X\n",i);
-				continue;
-			}
-			if (copy_to_user(read_audio.buf,
-					 current_drive->aud_buf,
-					 read_audio.nframes * CD_FRAMESIZE_RAW))
-				RETURN_UP(-EFAULT);
-			msg(DBG_AUD,"read_audio: copy_to_user done.\n");
-			break;
-		}
-		cc_ModeSelect(CD_FRAMESIZE);
-		cc_ModeSense();
-		current_drive->mode=READ_M1;
-#if OLD_BUSY
-		busy_audio=0;
-#endif /* OLD_BUSY */
-		if (data_tries == 0)
-		{
-			msg(DBG_AUD,"read_audio: failed after 5 tries in line %d.\n", __LINE__);
-			RETURN_UP(-EIO);
-		}
-		msg(DBG_AUD,"read_audio: successful return.\n");
-		RETURN_UP(0);
-	} /* end of CDROMREADAUDIO */
-
-	default:
-		msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
-		RETURN_UP(-EINVAL);
-	} /* end switch(cmd) */
-}
-
-static int sbpcd_block_media_changed(struct gendisk *disk)
-{
-	struct sbpcd_drive *p = disk->private_data;
-	return cdrom_media_changed(p->sbpcd_infop);
-}
-
-static struct block_device_operations sbpcd_bdops =
-{
-	.owner		= THIS_MODULE,
-	.open		= sbpcd_block_open,
-	.release	= sbpcd_block_release,
-	.ioctl		= sbpcd_block_ioctl,
-	.media_changed	= sbpcd_block_media_changed,
-};
-/*==========================================================================*/
-/*
- *  Open the device special file.  Check that a disk is in. Read TOC.
- */
-static int sbpcd_open(struct cdrom_device_info *cdi, int purpose)
-{
-	struct sbpcd_drive *p = cdi->handle;
-
-	down(&ioctl_read_sem);
-	switch_drive(p);
-
-	/*
-	 * try to keep an "open" counter here and lock the door if 0->1.
-	 */
-	msg(DBG_LCK,"open_count: %d -> %d\n",
-	    current_drive->open_count,current_drive->open_count+1);
-	if (++current_drive->open_count<=1)
-	{
-		int i;
-		i=LockDoor();
-		current_drive->open_count=1;
-		if (famT_drive)	msg(DBG_TEA,"sbpcd_open: before i=DiskInfo();.\n");
-		i=DiskInfo();
-		if (famT_drive)	msg(DBG_TEA,"sbpcd_open: after i=DiskInfo();.\n");
-		if ((current_drive->ored_ctl_adr&0x40)==0)
-		{		
-			msg(DBG_INF,"CD contains no data tracks.\n");
-#ifdef SAFE_MIXED
-			current_drive->has_data=0;
-#endif /* SAFE_MIXED */
-		}
-#ifdef SAFE_MIXED
-		else if (current_drive->has_data<1) current_drive->has_data=1;
-#endif /* SAFE_MIXED */ 
-	}
-	if (!st_spinning) cc_SpinUp();
-	RETURN_UP(0);
-}
-/*==========================================================================*/
-/*
- *  On close, we flush all sbp blocks from the buffer cache.
- */
-static void sbpcd_release(struct cdrom_device_info * cdi)
-{
-	struct sbpcd_drive *p = cdi->handle;
-
-	if (p->drv_id==-1) {
-		msg(DBG_INF, "release: bad device: %s\n", cdi->name);
-		return;
-	}
-	down(&ioctl_read_sem);
-	switch_drive(p);
-	/*
-	 * try to keep an "open" counter here and unlock the door if 1->0.
-	 */
-	msg(DBG_LCK,"open_count: %d -> %d\n",
-	    p->open_count,p->open_count-1);
-	if (p->open_count>-2) /* CDROMEJECT may have been done */
-	{
-		if (--p->open_count<=0) 
-		{
-			p->sbp_first_frame=p->sbp_last_frame=-1;
-			if (p->audio_state!=audio_playing)
-				if (p->f_eject) cc_SpinDown();
-			p->diskstate_flags &= ~cd_size_bit;
-			p->open_count=0; 
-#ifdef SAFE_MIXED
-			p->has_data=0;
-#endif /* SAFE_MIXED */ 
-		}
-	}
-	up(&ioctl_read_sem);
-	return ;
-}
-/*==========================================================================*/
-/*
- *
- */
-static int sbpcd_media_changed( struct cdrom_device_info *cdi, int disc_nr);
-static struct cdrom_device_ops sbpcd_dops = {
-	.open			= sbpcd_open,
-	.release		= sbpcd_release,
-	.drive_status		= sbpcd_drive_status,
-	.media_changed		= sbpcd_media_changed,
-	.tray_move		= sbpcd_tray_move,
-	.lock_door		= sbpcd_lock_door,
-	.select_speed		= sbpcd_select_speed,
-	.get_last_session	= sbpcd_get_last_session,
-	.get_mcn		= sbpcd_get_mcn,
-	.reset			= sbpcd_reset,
-	.audio_ioctl		= sbpcd_audio_ioctl,
-	.capability		= CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
-				CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
-				CDC_MCN | CDC_PLAY_AUDIO,
-	.n_minors		= 1,
-};
-
-/*==========================================================================*/
-/*
- * accept "kernel command line" parameters 
- * (suggested by Peter MacDonald with SLS 1.03)
- *
- * This is only implemented for the first controller. Should be enough to
- * allow installing with a "strange" distribution kernel.
- *
- * use: tell LILO:
- *                 sbpcd=0x230,SoundBlaster
- *             or
- *                 sbpcd=0x300,LaserMate
- *             or
- *                 sbpcd=0x338,SoundScape
- *             or
- *                 sbpcd=0x2C0,Teac16bit
- *
- * (upper/lower case sensitive here - but all-lowercase is ok!!!).
- *
- * the address value has to be the CDROM PORT ADDRESS -
- * not the soundcard base address.
- * For the SPEA/SoundScape setup, DO NOT specify the "configuration port"
- * address, but the address which is really used for the CDROM (usually 8
- * bytes above).
- *
- */
-
-int sbpcd_setup(char *s)
-{
-#ifndef MODULE
-	int p[4];
-	(void)get_options(s, ARRAY_SIZE(p), p);
-	setup_done++;
-	msg(DBG_INI,"sbpcd_setup called with %04X,%s\n",p[1], s);
-	sbpro_type=0; /* default: "LaserMate" */
-	if (p[0]>1) sbpro_type=p[2];
-	else if (!strcmp(s,str_sb)) sbpro_type=1;
-	else if (!strcmp(s,str_sb_l)) sbpro_type=1;
-	else if (!strcmp(s,str_sp)) sbpro_type=2;
-	else if (!strcmp(s,str_sp_l)) sbpro_type=2;
-	else if (!strcmp(s,str_ss)) sbpro_type=2;
-	else if (!strcmp(s,str_ss_l)) sbpro_type=2;
-	else if (!strcmp(s,str_t16)) sbpro_type=3;
-	else if (!strcmp(s,str_t16_l)) sbpro_type=3;
-	if (p[0]>0) sbpcd_ioaddr=p[1];
-	if (p[0]>2) max_drives=p[3];
-#else
-	sbpcd_ioaddr = sbpcd[0];
-	sbpro_type = sbpcd[1];
-#endif
-	
-	CDo_command=sbpcd_ioaddr;
-	CDi_info=sbpcd_ioaddr;
-	CDi_status=sbpcd_ioaddr+1;
-	CDo_sel_i_d=sbpcd_ioaddr+1;
-	CDo_reset=sbpcd_ioaddr+2;
-	CDo_enable=sbpcd_ioaddr+3; 
-	f_16bit=0;
-	if ((sbpro_type==1)||(sbpro_type==3))
-	{
-		CDi_data=sbpcd_ioaddr;
-		if (sbpro_type==3)
-                {
-                        f_16bit=1;
-                        sbpro_type=1;
-                }
-	}
-	else CDi_data=sbpcd_ioaddr+2;
-
-	return 1;
-}
-
-__setup("sbpcd=", sbpcd_setup);
-
-
-/*==========================================================================*/
-/*
- * Sequoia S-1000 CD-ROM Interface Configuration
- * as used within SPEA Media FX, Ensonic SoundScape and some Reveal cards
- * The soundcard has to get jumpered for the interface type "Panasonic"
- * (not Sony or Mitsumi) and to get soft-configured for
- *     -> configuration port address
- *     -> CDROM port offset (num_ports): has to be 8 here. Possibly this
- *        offset value determines the interface type (none, Panasonic,
- *        Mitsumi, Sony).
- *        The interface uses a configuration port (0x320, 0x330, 0x340, 0x350)
- *        some bytes below the real CDROM address.
- *         
- *        For the Panasonic style (LaserMate) interface and the configuration
- *        port 0x330, we have to use an offset of 8; so, the real CDROM port
- *        address is 0x338.
- */
-static int __init config_spea(void)
-{
-	/*
-         * base address offset between configuration port and CDROM port,
-	 * this probably defines the interface type
-         *   2 (type=??): 0x00
-         *   8 (type=LaserMate):0x10
-         *  16 (type=??):0x20
-         *  32 (type=??):0x30
-         */
-	int n_ports=0x10;
-
-	int irq_number=0; /* off:0x00, 2/9:0x01, 7:0x03, 12:0x05, 15:0x07 */
-	int dma_channel=0; /* off: 0x00, 0:0x08, 1:0x18, 3:0x38, 5:0x58, 6:0x68 */
-	int dack_polarity=0; /* L:0x00, H:0x80 */
-	int drq_polarity=0x40; /* L:0x00, H:0x40 */
-	int i;
-
-#define SPEA_REG_1 sbpcd_ioaddr-0x08+4
-#define SPEA_REG_2 sbpcd_ioaddr-0x08+5
-	
-	OUT(SPEA_REG_1,0xFF);
-	i=inb(SPEA_REG_1);
-	if (i!=0x0F)
-	{
-		msg(DBG_SEQ,"no SPEA interface at %04X present.\n", sbpcd_ioaddr);
-		return (-1); /* no interface found */
-	}
-	OUT(SPEA_REG_1,0x04);
-	OUT(SPEA_REG_2,0xC0);
-	
-	OUT(SPEA_REG_1,0x05);
-	OUT(SPEA_REG_2,0x10|drq_polarity|dack_polarity);
-	
-#if 1
-#define SPEA_PATTERN 0x80
-#else
-#define SPEA_PATTERN 0x00
-#endif
-	OUT(SPEA_REG_1,0x06);
-	OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
-	OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
-	
-	OUT(SPEA_REG_1,0x09);
-	i=(inb(SPEA_REG_2)&0xCF)|n_ports;
-	OUT(SPEA_REG_2,i);
-	
-	sbpro_type = 0; /* acts like a LaserMate interface now */
-	msg(DBG_SEQ,"found SoundScape interface at %04X.\n", sbpcd_ioaddr);
-	return (0);
-}
-
-/*==========================================================================*/
-/*
- *  Test for presence of drive and initialize it.
- *  Called once at boot or load time.
- */
-
-/* FIXME: cleanups after failed allocations are too ugly for words */
-#ifdef MODULE
-int __init __sbpcd_init(void)
-#else
-int __init sbpcd_init(void)
-#endif
-{
-	int i=0, j=0;
-	int addr[2]={1, CDROM_PORT};
-	int port_index;
-
-	sti();
-	
-	msg(DBG_INF,"sbpcd.c %s\n", VERSION);
-#ifndef MODULE
-#if DISTRIBUTION
-	if (!setup_done)
-	{
-		msg(DBG_INF,"Looking for Matsushita/Panasonic, CreativeLabs, Longshine, TEAC CD-ROM drives\n");
-		msg(DBG_INF,"= = = = = = = = = = W A R N I N G = = = = = = = = = =\n");
-		msg(DBG_INF,"Auto-Probing can cause a hang (f.e. touching an NE2000 card).\n");
-		msg(DBG_INF,"If that happens, you have to reboot and use the\n");
-		msg(DBG_INF,"LILO (kernel) command line feature like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x230,SoundBlaster\n");
-		msg(DBG_INF,"or like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x300,LaserMate\n");
-		msg(DBG_INF,"or like:\n");
-		msg(DBG_INF,"   LILO boot: ... sbpcd=0x338,SoundScape\n");
-		msg(DBG_INF,"with your REAL address.\n");
-		msg(DBG_INF,"= = = = = = = = = = END of WARNING = = = = = == = = =\n");
-	}
-#endif /* DISTRIBUTION */
-	sbpcd[0]=sbpcd_ioaddr; /* possibly changed by kernel command line */
-	sbpcd[1]=sbpro_type; /* possibly changed by kernel command line */
-#endif /* MODULE */
-	
-	for (port_index=0;port_index<NUM_PROBE;port_index+=2)
-	{
-		addr[1]=sbpcd[port_index];
-		if (addr[1]==0) break;
-		if (check_region(addr[1],4))
-		{
-			msg(DBG_INF,"check_region: %03X is not free.\n",addr[1]);
-			continue;
-		}
-		if (sbpcd[port_index+1]==2) type=str_sp;
-		else if (sbpcd[port_index+1]==1) type=str_sb;
-		else if (sbpcd[port_index+1]==3) type=str_t16;
-		else type=str_lm;
-		sbpcd_setup((char *)type);
-#if DISTRIBUTION
-		msg(DBG_INF,"Scanning 0x%X (%s)...\n", CDo_command, type);
-#endif /* DISTRIBUTION */
-		if (sbpcd[port_index+1]==2)
-		{
-			i=config_spea();
-			if (i<0) continue;
-		}
-#ifdef PATH_CHECK
-		if (check_card(addr[1])) continue;
-#endif /* PATH_CHECK */ 
-		i=check_drives();
-		msg(DBG_INI,"check_drives done.\n");
-		if (i>=0) break; /* drive found */
-	} /* end of cycling through the set of possible I/O port addresses */
-	
-	if (ndrives==0)
-	{
-		msg(DBG_INF, "No drive found.\n");
-#ifdef MODULE
-		return -EIO;
-#else
-		goto init_done;
-#endif /* MODULE */
-	}
-	
-	if (port_index>0)
-          {
-            msg(DBG_INF, "You should read Documentation/cdrom/sbpcd\n");
-            msg(DBG_INF, "and then configure sbpcd.h for your hardware.\n");
-          }
-	check_datarate();
-	msg(DBG_INI,"check_datarate done.\n");
-	
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		struct sbpcd_drive *p = D_S + j;
-		if (p->drv_id==-1)
-			continue;
-		switch_drive(p);
-#if 1
-		if (!famL_drive) cc_DriveReset();
-#endif
-		if (!st_spinning) cc_SpinUp();
-		p->sbp_first_frame = -1;  /* First frame in buffer */
-		p->sbp_last_frame = -1;   /* Last frame in buffer  */
-		p->sbp_read_frames = 0;   /* Number of frames being read to buffer */
-		p->sbp_current = 0;       /* Frame being currently read */
-		p->CD_changed=1;
-		p->frame_size=CD_FRAMESIZE;
-		p->f_eject=0;
-#if EJECT
-		if (!fam0_drive) p->f_eject=1;
-#endif /* EJECT */ 
-		cc_ReadStatus();
-		i=ResponseStatus();  /* returns orig. status or p_busy_new */
-		if (famT_drive) i=ResponseStatus();  /* returns orig. status or p_busy_new */
-		if (i<0)
-		{
-			if (i!=-402)
-				msg(DBG_INF,"init: ResponseStatus returns %d.\n",i);
-		}
-		else
-		{
-			if (st_check)
-			{
-				i=cc_ReadError();
-				msg(DBG_INI,"init: cc_ReadError returns %d\n",i);
-			}
-		}
-		msg(DBG_INI,"init: first GetStatus: %d\n",i);
-		msg(DBG_LCS,"init: first GetStatus: error_byte=%d\n",
-		    p->error_byte);
-		if (p->error_byte==aud_12)
-		{
-			timeout=jiffies+2*HZ;
-			do
-			{
-				i=GetStatus();
-				msg(DBG_INI,"init: second GetStatus: %02X\n",i);
-				msg(DBG_LCS,
-				    "init: second GetStatus: error_byte=%d\n",
-				    p->error_byte);
-				if (i<0) break;
-				if (!st_caddy_in) break;
-				}
-			while ((!st_diskok)||time_after(jiffies, timeout));
-		}
-		i=SetSpeed();
-		if (i>=0) p->CD_changed=1;
-	}
-
-	if (!request_region(CDo_command,4,major_name))
-	{
-		printk(KERN_WARNING "sbpcd: Unable to request region 0x%x\n", CDo_command);
-		return -EIO;
-	}
-
-	/*
-	 * Turn on the CD audio channels.
-	 * The addresses are obtained from SOUND_BASE (see sbpcd.h).
-	 */
-#if SOUND_BASE
-	OUT(MIXER_addr,MIXER_CD_Volume); /* select SB Pro mixer register */
-	OUT(MIXER_data,0xCC); /* one nibble per channel, max. value: 0xFF */
-#endif /* SOUND_BASE */
-
-	if (register_blkdev(MAJOR_NR, major_name)) {
-#ifdef MODULE
-		return -EIO;
-#else
-		goto init_done;
-#endif /* MODULE */
-	}
-
-	/*
-	 * init error handling is broken beyond belief in this driver...
-	 */
-	sbpcd_queue = blk_init_queue(do_sbpcd_request, &sbpcd_lock);
-	if (!sbpcd_queue) {
-		release_region(CDo_command,4);
-		unregister_blkdev(MAJOR_NR, major_name);
-		return -ENOMEM;
-	}
-
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		struct cdrom_device_info * sbpcd_infop;
-		struct gendisk *disk;
-		struct sbpcd_drive *p = D_S + j;
-
-		if (p->drv_id==-1) continue;
-		switch_drive(p);
-#ifdef SAFE_MIXED
-		p->has_data=0;
-#endif /* SAFE_MIXED */ 
-		/*
-		 * allocate memory for the frame buffers
-		 */
-		p->aud_buf=NULL;
-		p->sbp_audsiz=0;
-		p->sbp_bufsiz=buffers;
-		if (p->drv_type&drv_fam1)
-			if (READ_AUDIO>0)
-				p->sbp_audsiz = READ_AUDIO;
-		p->sbp_buf=(u_char *) vmalloc(buffers*CD_FRAMESIZE);
-		if (!p->sbp_buf) {
-			msg(DBG_INF,"data buffer (%d frames) not available.\n",
-				buffers);
-			if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
-			{
-				printk("Can't unregister %s\n", major_name);
-			}
-			release_region(CDo_command,4);
-			blk_cleanup_queue(sbpcd_queue);
-			return -EIO;
-		}
-#ifdef MODULE
-		msg(DBG_INF,"data buffer size: %d frames.\n",buffers);
-#endif /* MODULE */
-		if (p->sbp_audsiz>0)
-		{
-			p->aud_buf=(u_char *) vmalloc(p->sbp_audsiz*CD_FRAMESIZE_RAW);
-			if (p->aud_buf==NULL) msg(DBG_INF,"audio buffer (%d frames) not available.\n",p->sbp_audsiz);
-			else msg(DBG_INF,"audio buffer size: %d frames.\n",p->sbp_audsiz);
-		}
-                sbpcd_infop = vmalloc(sizeof (struct cdrom_device_info));
-		if (sbpcd_infop == NULL)
-		{
-                        release_region(CDo_command,4);
-			blk_cleanup_queue(sbpcd_queue);
-                        return -ENOMEM;
-		}
-		memset(sbpcd_infop, 0, sizeof(struct cdrom_device_info));
-		sbpcd_infop->ops = &sbpcd_dops;
-		sbpcd_infop->speed = 2;
-		sbpcd_infop->capacity = 1;
-		sprintf(sbpcd_infop->name, "sbpcd%d", j);
-		sbpcd_infop->handle = p;
-		p->sbpcd_infop = sbpcd_infop;
-		disk = alloc_disk(1);
-		disk->major = MAJOR_NR;
-		disk->first_minor = j;
-		disk->fops = &sbpcd_bdops;
-		strcpy(disk->disk_name, sbpcd_infop->name);
-		disk->flags = GENHD_FL_CD;
-		p->disk = disk;
-		if (register_cdrom(sbpcd_infop))
-		{
-			printk(" sbpcd: Unable to register with Uniform CD-ROm driver\n");
-		}
-		disk->private_data = p;
-		disk->queue = sbpcd_queue;
-		add_disk(disk);
-	}
-	blk_queue_hardsect_size(sbpcd_queue, CD_FRAMESIZE);
-
-#ifndef MODULE
- init_done:
-#endif
-	return 0;
-}
-/*==========================================================================*/
-#ifdef MODULE
-static void sbpcd_exit(void)
-{
-	int j;
-	
-	if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
-	{
-		msg(DBG_INF, "What's that: can't unregister %s.\n", major_name);
-		return;
-	}
-	release_region(CDo_command,4);
-	blk_cleanup_queue(sbpcd_queue);
-	for (j=0;j<NR_SBPCD;j++)
-	{
-		if (D_S[j].drv_id==-1) continue;
-		del_gendisk(D_S[j].disk);
-		put_disk(D_S[j].disk);
-		vfree(D_S[j].sbp_buf);
-		if (D_S[j].sbp_audsiz>0)
-			vfree(D_S[j].aud_buf);
-		if ((unregister_cdrom(D_S[j].sbpcd_infop) == -EINVAL))
-		{
-			msg(DBG_INF, "What's that: can't unregister info %s.\n", major_name);
-			return;
-		}
-		vfree(D_S[j].sbpcd_infop);
-	}
-	msg(DBG_INF, "%s module released.\n", major_name);
-}
-
-
-module_init(__sbpcd_init) /*HACK!*/;
-module_exit(sbpcd_exit);
-
-
-#endif /* MODULE */
-static int sbpcd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
-{
-	struct sbpcd_drive *p = cdi->handle;
-	msg(DBG_CHK,"media_check (%s) called\n", cdi->name);
-	
-	if (p->CD_changed==0xFF)
-        {
-                p->CD_changed=0;
-                msg(DBG_CHK,"medium changed (drive %s)\n", cdi->name);
-		current_drive->diskstate_flags &= ~toc_bit;
-		/* we *don't* need invalidate here, it's done by caller */
-		current_drive->diskstate_flags &= ~cd_size_bit;
-#ifdef SAFE_MIXED
-		current_drive->has_data=0;
-#endif /* SAFE_MIXED */ 
-
-                return (1);
-        }
-        else
-                return (0);
-}
-
-MODULE_LICENSE("GPL");
-/* FIXME: Old modules.conf claims MATSUSHITA_CDROM2_MAJOR and CDROM3, but
-   AFAICT this doesn't support those majors, so why? --RR 30 Jul 2003 */
-MODULE_ALIAS_BLOCKDEV_MAJOR(MATSUSHITA_CDROM_MAJOR);
-
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file. 
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */
-
diff --git a/drivers/cdrom/sbpcd.h b/drivers/cdrom/sbpcd.h
deleted file mode 100644
index 2f2225f13c6f..000000000000
--- a/drivers/cdrom/sbpcd.h
+++ /dev/null
@@ -1,839 +0,0 @@
-/*
- * sbpcd.h   Specify interface address and interface type here.
- */
-
-/*
- * Attention! This file contains user-serviceable parts!
- * I recommend to make use of it...
- * If you feel helpless, look into Documentation/cdrom/sbpcd
- * (good idea anyway, at least before mailing me).
- *
- * The definitions for the first controller can get overridden by
- * the kernel command line ("lilo boot option").
- * Examples:
- *                                 sbpcd=0x300,LaserMate
- *                             or
- *                                 sbpcd=0x230,SoundBlaster
- *                             or
- *                                 sbpcd=0x338,SoundScape
- *                             or
- *                                 sbpcd=0x2C0,Teac16bit
- *
- * If sbpcd gets used as a module, you can load it with
- *     insmod sbpcd.o sbpcd=0x300,0
- * or
- *     insmod sbpcd.o sbpcd=0x230,1
- * or
- *     insmod sbpcd.o sbpcd=0x338,2
- * or
- *     insmod sbpcd.o sbpcd=0x2C0,3
- * respective to override the configured address and type.
- */
-
-/*
- * define your CDROM port base address as CDROM_PORT
- * and specify the type of your interface card as SBPRO.
- *
- * address:
- * ========
- * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
- * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
- * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
- * specify the REAL address here, not the configuration port address. Look
- * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
- * sbpcd auto-probe, if you are not firm with the address.
- * There are some soundcards on the market with 0x0630, 0x0650, ...; their
- * type is not obvious (both types are possible).
- *
- * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
- *          if your soundcard has its CDROM port above 0x300, specify
- *          that address and try SBPRO 0 first.
- *          if your SoundScape configuration port is at 0x330, specify
- *          0x338 and SBPRO 2.
- *
- * interface type:
- * ===============
- * set SBPRO to 1 for "true" SoundBlaster card
- * set SBPRO to 0 for "compatible" soundcards and
- *                for "poor" (no sound) interface cards.
- * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
- * set SBPRO to 3 for Teac 16bit interface cards
- *
- * Almost all "compatible" sound boards need to set SBPRO to 0.
- * If SBPRO is set wrong, the drives will get found - but any
- * data access will give errors (audio access will work).
- * The "OmniCD" no-sound interface card from CreativeLabs and most Teac
- * interface cards need SBPRO 1.
- *
- * sound base:
- * ===========
- * The SOUND_BASE definition tells if we should try to turn the CD sound
- * channels on. It will only be of use regarding soundcards with a SbPro
- * compatible mixer.
- *
- * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
- *          #define SOUND_BASE 0     leaves the soundcard untouched
- */
-#define CDROM_PORT 0x340 /* <-----------<< port address                      */
-#define SBPRO      0     /* <-----------<< interface type                    */
-#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */
-#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0   */
-
-/*
- * some more or less user dependent definitions - service them!
- */
-
-/* Set this to 0 once you have configured your interface definitions right. */
-#define DISTRIBUTION 1
-
-/*
- * Time to wait after giving a message.
- * This gets important if you enable non-standard DBG_xxx flags.
- * You will see what happens if you omit the pause or make it
- * too short. Be warned!
- */
-#define KLOGD_PAUSE 1
-
-/* tray control: eject tray if no disk is in */
-#if DISTRIBUTION
-#define JUKEBOX 0
-#else
-#define JUKEBOX 1
-#endif /* DISTRIBUTION */
-
-/* tray control: eject tray after last use */
-#if DISTRIBUTION
-#define EJECT 0
-#else
-#define EJECT 1
-#endif /* DISTRIBUTION */
-
-/* max. number of audio frames to read with one     */
-/* request (allocates n* 2352 bytes kernel memory!) */
-/* may be freely adjusted, f.e. 75 (= 1 sec.), at   */
-/* runtime by use of the CDROMAUDIOBUFSIZ ioctl.    */
-#define READ_AUDIO 0
-
-/* Optimizations for the Teac CD-55A drive read performance.
- * SBP_TEAC_SPEED can be changed here, or one can set the 
- * variable "teac" when loading as a module.
- * Valid settings are:
- *   0 - very slow - the recommended "DISTRIBUTION 1" setup.
- *   1 - 2x performance with little overhead. No busy waiting.
- *   2 - 4x performance with 5ms overhead per read. Busy wait.
- *
- * Setting SBP_TEAC_SPEED or the variable 'teac' to anything
- * other than 0 may cause problems. If you run into them, first
- * change SBP_TEAC_SPEED back to 0 and see if your drive responds
- * normally. If yes, you are "allowed" to report your case - to help
- * me with the driver, not to solve your hassle. Don´t mail if you
- * simply are stuck into your own "tuning" experiments, you know?
- */
-#define SBP_TEAC_SPEED 1
-
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * nothing to change below here if you are not fully aware what you're doing
- */
-#ifndef _LINUX_SBPCD_H
-
-#define _LINUX_SBPCD_H
-/*==========================================================================*/
-/*==========================================================================*/
-/*
- * driver's own read_ahead, data mode
- */
-#define SBP_BUFFER_FRAMES 8 
-
-#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
-#undef  FUTURE
-#undef SAFE_MIXED
-
-#define TEST_UPC 0
-#define SPEA_TEST 0
-#define TEST_STI 0
-#define OLD_BUSY 0
-#undef PATH_CHECK
-#ifndef SOUND_BASE
-#define SOUND_BASE 0
-#endif
-#if DISTRIBUTION
-#undef SBP_TEAC_SPEED
-#define SBP_TEAC_SPEED 0
-#endif
-/*==========================================================================*/
-/*
- * DDI interface definitions
- * "invented" by Fred N. van Kempen..
- */
-#define DDIOCSDBG	0x9000
-
-/*==========================================================================*/
-/*
- * "private" IOCTL functions
- */
-#define CDROMAUDIOBUFSIZ	0x5382 /* set the audio buffer size */
-
-/*==========================================================================*/
-/*
- * Debug output levels
- */
-#define DBG_INF	1	/* necessary information */
-#define DBG_BSZ	2	/* BLOCK_SIZE trace */
-#define DBG_REA	3	/* READ status trace */
-#define DBG_CHK	4	/* MEDIA CHECK trace */
-#define DBG_TIM	5	/* datarate timer test */
-#define DBG_INI	6	/* initialization trace */
-#define DBG_TOC	7	/* tell TocEntry values */
-#define DBG_IOC	8	/* ioctl trace */
-#define DBG_STA	9	/* ResponseStatus() trace */
-#define DBG_ERR	10	/* cc_ReadError() trace */
-#define DBG_CMD	11	/* cmd_out() trace */
-#define DBG_WRN	12	/* give explanation before auto-probing */
-#define DBG_MUL	13	/* multi session code test */
-#define DBG_IDX	14	/* test code for drive_id !=0 */
-#define DBG_IOX	15	/* some special information */
-#define DBG_DID	16	/* drive ID test */
-#define DBG_RES	17	/* drive reset info */
-#define DBG_SPI	18	/* SpinUp test */
-#define DBG_IOS	19	/* ioctl trace: subchannel functions */
-#define DBG_IO2	20	/* ioctl trace: general */
-#define DBG_UPC	21	/* show UPC information */
-#define DBG_XA1	22	/* XA mode debugging */
-#define DBG_LCK	23	/* door (un)lock info */
-#define DBG_SQ1	24	/* dump SubQ frame */
-#define DBG_AUD	25	/* READ AUDIO debugging */
-#define DBG_SEQ	26	/* Sequoia interface configuration trace */
-#define DBG_LCS	27	/* Longshine LCS-7260 debugging trace */
-#define DBG_CD2	28	/* MKE/Funai CD200 debugging trace */
-#define DBG_TEA	29	/* TEAC CD-55A debugging trace */
-#define DBG_ECS	30	/* ECS-AT (Vertos 100) debugging trace */
-#define DBG_000	31	/* unnecessary information */
-
-/*==========================================================================*/
-/*==========================================================================*/
-
-/*
- * bits of flags_cmd_out:
- */
-#define f_respo3		0x100
-#define f_putcmd		0x80
-#define f_respo2		0x40
-#define f_lopsta		0x20
-#define f_getsta		0x10
-#define f_ResponseStatus	0x08
-#define f_obey_p_check		0x04
-#define f_bit1			0x02
-#define f_wait_if_busy		0x01
-
-/*
- * diskstate_flags:
- */
-#define x80_bit			0x80
-#define upc_bit			0x40
-#define volume_bit		0x20
-#define toc_bit			0x10
-#define multisession_bit	0x08
-#define cd_size_bit		0x04
-#define subq_bit		0x02
-#define frame_size_bit		0x01
-
-/*
- * disk states (bits of diskstate_flags):
- */
-#define upc_valid		(current_drive->diskstate_flags&upc_bit)
-#define volume_valid		(current_drive->diskstate_flags&volume_bit)
-#define toc_valid		(current_drive->diskstate_flags&toc_bit)
-#define cd_size_valid		(current_drive->diskstate_flags&cd_size_bit)
-#define subq_valid		(current_drive->diskstate_flags&subq_bit)
-#define frame_size_valid	(current_drive->diskstate_flags&frame_size_bit)
-
-/*
- * the status_bits variable
- */
-#define p_success	0x100
-#define p_door_closed	0x80
-#define p_caddy_in	0x40
-#define p_spinning	0x20
-#define p_check		0x10
-#define p_busy_new	0x08
-#define p_door_locked	0x04
-#define p_disk_ok	0x01
-
-/*
- * LCS-7260 special status result bits:
- */
-#define p_lcs_door_locked	0x02
-#define p_lcs_door_closed	0x01 /* probably disk_in */
-
-/*
- * CR-52x special status result bits:
- */
-#define p_caddin_old	0x40
-#define p_success_old	0x08
-#define p_busy_old	0x04
-#define p_bit_1		0x02	/* hopefully unused now */
-
-/*
- * "generation specific" defs of the status result bits:
- */
-#define p0_door_closed	0x80
-#define p0_caddy_in	0x40
-#define p0_spinning	0x20
-#define p0_check	0x10
-#define p0_success	0x08 /* unused */
-#define p0_busy		0x04
-#define p0_bit_1	0x02 /* unused */
-#define p0_disk_ok	0x01
-
-#define pL_disk_in	0x40
-#define pL_spinning	0x20
-#define pL_check	0x10
-#define pL_success	0x08 /* unused ?? */
-#define pL_busy		0x04
-#define pL_door_locked	0x02
-#define pL_door_closed	0x01
-
-#define pV_door_closed	0x40
-#define pV_spinning	0x20
-#define pV_check	0x10
-#define pV_success	0x08
-#define pV_busy		0x04
-#define pV_door_locked	0x02
-#define pV_disk_ok	0x01
-
-#define p1_door_closed	0x80
-#define p1_disk_in	0x40
-#define p1_spinning	0x20
-#define p1_check	0x10
-#define p1_busy		0x08
-#define p1_door_locked	0x04
-#define p1_bit_1	0x02 /* unused */
-#define p1_disk_ok	0x01
-
-#define p2_disk_ok	0x80
-#define p2_door_locked	0x40
-#define p2_spinning	0x20
-#define p2_busy2	0x10
-#define p2_busy1	0x08
-#define p2_door_closed	0x04
-#define p2_disk_in	0x02
-#define p2_check	0x01
-
-/*
- * used drive states:
- */
-#define st_door_closed	(current_drive->status_bits&p_door_closed)
-#define st_caddy_in	(current_drive->status_bits&p_caddy_in)
-#define st_spinning	(current_drive->status_bits&p_spinning)
-#define st_check	(current_drive->status_bits&p_check)
-#define st_busy		(current_drive->status_bits&p_busy_new)
-#define st_door_locked	(current_drive->status_bits&p_door_locked)
-#define st_diskok	(current_drive->status_bits&p_disk_ok)
-
-/*
- * bits of the CDi_status register:
- */
-#define s_not_result_ready	0x04 /* 0: "result ready" */
-#define s_not_data_ready	0x02 /* 0: "data ready"   */
-#define s_attention		0x01 /* 1: "attention required" */
-/*
- * usable as:
- */
-#define DRV_ATTN	((inb(CDi_status)&s_attention)!=0)
-#define DATA_READY	((inb(CDi_status)&s_not_data_ready)==0)
-#define RESULT_READY	((inb(CDi_status)&s_not_result_ready)==0)
-
-/*
- * drive families and types (firmware versions):
- */
-#define drv_fam0	0x0100		/* CR-52x family */
-#define drv_199		(drv_fam0+0x01)	/* <200 */
-#define drv_200		(drv_fam0+0x02)	/* <201 */
-#define drv_201		(drv_fam0+0x03)	/* <210 */
-#define drv_210		(drv_fam0+0x04)	/* <211 */
-#define drv_211		(drv_fam0+0x05)	/* <300 */
-#define drv_300		(drv_fam0+0x06)	/* >=300 */
-
-#define drv_fam1	0x0200		/* CR-56x family */
-#define drv_099		(drv_fam1+0x01)	/* <100 */
-#define drv_100		(drv_fam1+0x02)	/* >=100, only 1.02 and 5.00 known */
-
-#define drv_fam2	0x0400		/* CD200 family */
-
-#define drv_famT	0x0800		/* TEAC CD-55A */
-
-#define drv_famL	0x1000		/* Longshine family */
-#define drv_260		(drv_famL+0x01)	/* LCS-7260 */
-#define drv_e1		(drv_famL+0x01)	/* LCS-7260, firmware "A E1" */
-#define drv_f4		(drv_famL+0x02)	/* LCS-7260, firmware "A4F4" */
-
-#define drv_famV	0x2000		/* ECS-AT (vertos-100) family */
-#define drv_at		(drv_famV+0x01)	/* ECS-AT, firmware "1.00" */
-
-#define fam0_drive	(current_drive->drv_type&drv_fam0)
-#define famL_drive	(current_drive->drv_type&drv_famL)
-#define famV_drive	(current_drive->drv_type&drv_famV)
-#define fam1_drive	(current_drive->drv_type&drv_fam1)
-#define fam2_drive	(current_drive->drv_type&drv_fam2)
-#define famT_drive	(current_drive->drv_type&drv_famT)
-#define fam0L_drive	(current_drive->drv_type&(drv_fam0|drv_famL))
-#define fam0V_drive	(current_drive->drv_type&(drv_fam0|drv_famV))
-#define famLV_drive	(current_drive->drv_type&(drv_famL|drv_famV))
-#define fam0LV_drive	(current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
-#define fam1L_drive	(current_drive->drv_type&(drv_fam1|drv_famL))
-#define fam1V_drive	(current_drive->drv_type&(drv_fam1|drv_famV))
-#define fam1LV_drive	(current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
-#define fam01_drive	(current_drive->drv_type&(drv_fam0|drv_fam1))
-#define fam12_drive	(current_drive->drv_type&(drv_fam1|drv_fam2))
-#define fam2T_drive	(current_drive->drv_type&(drv_fam2|drv_famT))
-
-/*
- * audio states:
- */
-#define audio_completed	3 /* Forgot this one! --AJK */
-#define audio_playing	2
-#define audio_pausing	1
-
-/*
- * drv_pattern, drv_options:
- */
-#define speed_auto	0x80
-#define speed_300	0x40
-#define speed_150	0x20
-#define audio_mono	0x04
-
-/*
- * values of cmd_type (0 else):
- */
-#define READ_M1	0x01	/* "data mode 1": 2048 bytes per frame */
-#define READ_M2	0x02	/* "data mode 2": 12+2048+280 bytes per frame */
-#define READ_SC	0x04	/* "subchannel info": 96 bytes per frame */
-#define READ_AU	0x08	/* "audio frame": 2352 bytes per frame */
-
-/*
- * sense_byte:
- *
- *          values: 00
- *                  01
- *                  81
- *                  82 "raw audio" mode
- *                  xx from infobuf[0] after 85 00 00 00 00 00 00
- */
-
-/* audio status (bin) */
-#define aud_00 0x00 /* Audio status byte not supported or not valid */
-#define audx11 0x0b /* Audio play operation in progress             */
-#define audx12 0x0c /* Audio play operation paused                  */
-#define audx13 0x0d /* Audio play operation successfully completed  */
-#define audx14 0x0e /* Audio play operation stopped due to error    */
-#define audx15 0x0f /* No current audio status to return            */
-/* audio status (bcd) */
-#define aud_11 0x11 /* Audio play operation in progress             */
-#define aud_12 0x12 /* Audio play operation paused                  */
-#define aud_13 0x13 /* Audio play operation successfully completed  */
-#define aud_14 0x14 /* Audio play operation stopped due to error    */
-#define aud_15 0x15 /* No current audio status to return            */
-
-/*
- * highest allowed drive number (MINOR+1)
- */
-#define NR_SBPCD	4
-
-/*
- * we try to never disable interrupts - seems to work
- */
-#define SBPCD_DIS_IRQ	0
-
-/*
- * "write byte to port"
- */
-#define OUT(x,y)	outb(y,x)
-
-/*==========================================================================*/
-
-#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
-#define MIXER_data SOUND_BASE+5 /* sound card's data register */
-#define MIXER_CD_Volume	0x28	/* internal SB Pro register address */
-
-/*==========================================================================*/
-
-#define MAX_TRACKS	99
-
-#define ERR_DISKCHANGE 615
-
-/*==========================================================================*/
-/*
- * To make conversions easier (machine dependent!)
- */
-typedef union _msf
-{
-	u_int n;
-	u_char c[4];
-} MSF;
-
-typedef union _blk
-{
-	u_int n;
-	u_char c[4];
-} BLK;
-
-/*==========================================================================*/
-
-/*============================================================================
-==============================================================================
-
-COMMAND SET of "old" drives like CR-521, CR-522
-               (the CR-562 family is different):
-
-No.	Command			       Code
---------------------------------------------
-
-Drive Commands:
- 1	Seek				01	
- 2	Read Data			02
- 3	Read XA-Data			03
- 4	Read Header			04
- 5	Spin Up				05
- 6	Spin Down			06
- 7	Diagnostic			07
- 8	Read UPC			08
- 9	Read ISRC			09
-10	Play Audio			0A
-11	Play Audio MSF			0B
-12	Play Audio Track/Index		0C
-
-Status Commands:
-13	Read Status			81	
-14	Read Error			82
-15	Read Drive Version		83
-16	Mode Select			84
-17	Mode Sense			85
-18	Set XA Parameter		86
-19	Read XA Parameter		87
-20	Read Capacity			88
-21	Read SUB_Q			89
-22	Read Disc Code			8A
-23	Read Disc Information		8B
-24	Read TOC			8C
-25	Pause/Resume			8D
-26	Read Packet			8E
-27	Read Path Check			00
- 
- 
-all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
-
-mnemo     7-byte command        #bytes response (r0...rn)
-________ ____________________  ____ 
-
-Read Status:
-status:  81.                    (1)  one-byte command, gives the main
-                                                          status byte
-Read Error:
-check1:  82 00 00 00 00 00 00.  (6)  r1: audio status
-
-Read Packet:
-check2:  8e xx 00 00 00 00 00. (xx)  gets xx bytes response, relating
-                                        to commands 01 04 05 07 08 09
-
-Play Audio:
-play:    0a ll-bb-aa nn-nn-nn.  (0)  play audio, ll-bb-aa: starting block (lba),
-                                                 nn-nn-nn: #blocks
-Play Audio MSF:
-         0b mm-ss-ff mm-ss-ff   (0)  play audio from/to
-
-Play Audio Track/Index:
-         0c ...
-
-Pause/Resume:
-pause:   8d pr 00 00 00 00 00.  (0)  pause (pr=00) 
-                                     resume (pr=80) audio playing
-
-Mode Select:
-         84 00 nn-nn ??.?? 00   (0)  nn-nn: 2048 or 2340
-                                     possibly defines transfer size
-
-set_vol: 84 83 00 00 sw le 00.  (0)  sw(itch): lrxxxxxx (off=1)
-                                     le(vel): min=0, max=FF, else half
-				     (firmware 2.11)
-
-Mode Sense:
-get_vol: 85 03 00 00 00 00 00.  (2)  tell current audio volume setting
-
-Read Disc Information:
-tocdesc: 8b 00 00 00 00 00 00.  (6)  read the toc descriptor ("msf-bin"-format)
-
-Read TOC:
-tocent:  8c fl nn 00 00 00 00.  (8)  read toc entry #nn
-                                       (fl=0:"lba"-, =2:"msf-bin"-format)
-
-Read Capacity:
-capacit: 88 00 00 00 00 00 00.  (5)  "read CD-ROM capacity"
-
-
-Read Path Check:
-ping:    00 00 00 00 00 00 00.  (2)  r0=AA, r1=55
-                                     ("ping" if the drive is connected)
-
-Read Drive Version:
-ident:   83 00 00 00 00 00 00. (12)  gives "MATSHITAn.nn" 
-                                     (n.nn = 2.01, 2.11., 3.00, ...)
-
-Seek:
-seek:    01 00 ll-bb-aa 00 00.  (0)  
-seek:    01 02 mm-ss-ff 00 00.  (0)  
-
-Read Data:
-read:    02 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2048 bytes,
-                                     starting at block xx-xx-xx  
-                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read XA-Data:
-read:    03 xx-xx-xx nn-nn fl.  (?)  read nn-nn blocks of 2340 bytes, 
-                                     starting at block xx-xx-xx
-                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
-
-Read SUB_Q:
-         89 fl 00 00 00 00 00. (13)  r0: audio status, r4-r7: lba/msf, 
-                                       fl=0: "lba", fl=2: "msf"
-
-Read Disc Code:
-         8a 00 00 00 00 00 00. (14)  possibly extended "check condition"-info
-
-Read Header:
-         04 00 ll-bb-aa 00 00.  (0)   4 bytes response with "check2"
-         04 02 mm-ss-ff 00 00.  (0)   4 bytes response with "check2"
-
-Spin Up:
-         05 00 ll-bb-aa 00 00.  (0)  possibly implies a "seek"
-
-Spin Down:
-         06 ...
-
-Diagnostic:
-         07 00 ll-bb-aa 00 00.  (2)   2 bytes response with "check2"
-         07 02 mm-ss-ff 00 00.  (2)   2 bytes response with "check2"
-
-Read UPC:
-         08 00 ll-bb-aa 00 00. (16)  
-         08 02 mm-ss-ff 00 00. (16)  
-
-Read ISRC:
-         09 00 ll-bb-aa 00 00. (15)  15 bytes response with "check2"
-         09 02 mm-ss-ff 00 00. (15)  15 bytes response with "check2"
-
-Set XA Parameter:
-         86 ...
-
-Read XA Parameter:
-         87 ...
-
-==============================================================================
-============================================================================*/
-
-/*
- * commands
- *
- * CR-52x:      CMD0_
- * CR-56x:      CMD1_
- * CD200:       CMD2_
- * LCS-7260:    CMDL_
- * TEAC CD-55A: CMDT_
- * ECS-AT:      CMDV_
- */
-#define CMD1_RESET	0x0a
-#define CMD2_RESET	0x01
-#define CMDT_RESET	0xc0
-
-#define CMD1_LOCK_CTL	0x0c
-#define CMD2_LOCK_CTL	0x1e
-#define CMDT_LOCK_CTL	CMD2_LOCK_CTL
-#define CMDL_LOCK_CTL	0x0e
-#define CMDV_LOCK_CTL	CMDL_LOCK_CTL
-
-#define CMD1_TRAY_CTL	0x07
-#define CMD2_TRAY_CTL	0x1b
-#define CMDT_TRAY_CTL	CMD2_TRAY_CTL
-#define CMDL_TRAY_CTL	0x0d
-#define CMDV_TRAY_CTL	CMDL_TRAY_CTL
-
-#define CMD1_MULTISESS	0x8d
-#define CMDL_MULTISESS	0x8c
-#define CMDV_MULTISESS	CMDL_MULTISESS
-
-#define CMD1_SUBCHANINF	0x11
-#define CMD2_SUBCHANINF	0x??
-
-#define CMD1_ABORT	0x08
-#define CMD2_ABORT	0x08
-#define CMDT_ABORT	0x08
-
-#define CMD2_x02	0x02
-
-#define CMD2_SETSPEED	0xda
-
-#define CMD0_PATH_CHECK	0x00
-#define CMD1_PATH_CHECK	0x???
-#define CMD2_PATH_CHECK	0x???
-#define CMDT_PATH_CHECK	0x???
-#define CMDL_PATH_CHECK	CMD0_PATH_CHECK
-#define CMDV_PATH_CHECK	CMD0_PATH_CHECK
-
-#define CMD0_SEEK	0x01
-#define CMD1_SEEK	CMD0_SEEK
-#define CMD2_SEEK	0x2b
-#define CMDT_SEEK	CMD2_SEEK
-#define CMDL_SEEK	CMD0_SEEK
-#define CMDV_SEEK	CMD0_SEEK
-
-#define CMD0_READ	0x02
-#define CMD1_READ	0x10
-#define CMD2_READ	0x28
-#define CMDT_READ	CMD2_READ
-#define CMDL_READ	CMD0_READ
-#define CMDV_READ	CMD0_READ
-
-#define CMD0_READ_XA	0x03
-#define CMD2_READ_XA	0xd4
-#define CMD2_READ_XA2	0xd5
-#define CMDL_READ_XA	CMD0_READ_XA /* really ?? */
-#define CMDV_READ_XA	CMD0_READ_XA
-
-#define CMD0_READ_HEAD	0x04
-
-#define CMD0_SPINUP	0x05
-#define CMD1_SPINUP	0x02
-#define CMD2_SPINUP	CMD2_TRAY_CTL
-#define CMDL_SPINUP	CMD0_SPINUP
-#define CMDV_SPINUP	CMD0_SPINUP
-
-#define CMD0_SPINDOWN	0x06 /* really??? */
-#define CMD1_SPINDOWN	0x06
-#define CMD2_SPINDOWN	CMD2_TRAY_CTL
-#define CMDL_SPINDOWN	0x0d
-#define CMDV_SPINDOWN	CMD0_SPINDOWN
-
-#define CMD0_DIAG	0x07
-
-#define CMD0_READ_UPC	0x08
-#define CMD1_READ_UPC	0x88
-#define CMD2_READ_UPC	0x???
-#define CMDL_READ_UPC	CMD0_READ_UPC
-#define CMDV_READ_UPC	0x8f
-
-#define CMD0_READ_ISRC	0x09
-
-#define CMD0_PLAY	0x0a
-#define CMD1_PLAY	0x???
-#define CMD2_PLAY	0x???
-#define CMDL_PLAY	CMD0_PLAY
-#define CMDV_PLAY	CMD0_PLAY
-
-#define CMD0_PLAY_MSF	0x0b
-#define CMD1_PLAY_MSF	0x0e
-#define CMD2_PLAY_MSF	0x47
-#define CMDT_PLAY_MSF	CMD2_PLAY_MSF
-#define CMDL_PLAY_MSF	0x???
-
-#define CMD0_PLAY_TI	0x0c
-#define CMD1_PLAY_TI	0x0f
-
-#define CMD0_STATUS	0x81
-#define CMD1_STATUS	0x05
-#define CMD2_STATUS	0x00
-#define CMDT_STATUS	CMD2_STATUS
-#define CMDL_STATUS	CMD0_STATUS
-#define CMDV_STATUS	CMD0_STATUS
-#define CMD2_SEEK_LEADIN 0x00
-
-#define CMD0_READ_ERR	0x82
-#define CMD1_READ_ERR	CMD0_READ_ERR
-#define CMD2_READ_ERR	0x03
-#define CMDT_READ_ERR	CMD2_READ_ERR /* get audio status */
-#define CMDL_READ_ERR	CMD0_READ_ERR
-#define CMDV_READ_ERR	CMD0_READ_ERR
-
-#define CMD0_READ_VER	0x83
-#define CMD1_READ_VER	CMD0_READ_VER
-#define CMD2_READ_VER	0x12
-#define CMDT_READ_VER	CMD2_READ_VER /* really ?? */
-#define CMDL_READ_VER	CMD0_READ_VER
-#define CMDV_READ_VER	CMD0_READ_VER
-
-#define CMD0_SETMODE	0x84
-#define CMD1_SETMODE	0x09
-#define CMD2_SETMODE	0x55
-#define CMDT_SETMODE	CMD2_SETMODE
-#define CMDL_SETMODE	CMD0_SETMODE
-
-#define CMD0_GETMODE	0x85
-#define CMD1_GETMODE	0x84
-#define CMD2_GETMODE	0x5a
-#define CMDT_GETMODE	CMD2_GETMODE
-#define CMDL_GETMODE	CMD0_GETMODE
-
-#define CMD0_SET_XA	0x86
-
-#define CMD0_GET_XA	0x87
-
-#define CMD0_CAPACITY	0x88
-#define CMD1_CAPACITY	0x85
-#define CMD2_CAPACITY	0x25
-#define CMDL_CAPACITY	CMD0_CAPACITY /* missing in some firmware versions */
-
-#define CMD0_READSUBQ	0x89
-#define CMD1_READSUBQ	0x87
-#define CMD2_READSUBQ	0x42
-#define CMDT_READSUBQ	CMD2_READSUBQ
-#define CMDL_READSUBQ	CMD0_READSUBQ
-#define CMDV_READSUBQ	CMD0_READSUBQ
-
-#define CMD0_DISKCODE	0x8a
-
-#define CMD0_DISKINFO	0x8b
-#define CMD1_DISKINFO	CMD0_DISKINFO
-#define CMD2_DISKINFO	0x43
-#define CMDT_DISKINFO	CMD2_DISKINFO
-#define CMDL_DISKINFO	CMD0_DISKINFO
-#define CMDV_DISKINFO	CMD0_DISKINFO
-
-#define CMD0_READTOC	0x8c
-#define CMD1_READTOC	CMD0_READTOC
-#define CMD2_READTOC	0x???
-#define CMDL_READTOC	CMD0_READTOC
-#define CMDV_READTOC	CMD0_READTOC
-
-#define CMD0_PAU_RES	0x8d
-#define CMD1_PAU_RES	0x0d
-#define CMD2_PAU_RES	0x4b
-#define CMDT_PAUSE	CMD2_PAU_RES
-#define CMDL_PAU_RES	CMD0_PAU_RES
-#define CMDV_PAUSE	CMD0_PAU_RES
-
-#define CMD0_PACKET	0x8e
-#define CMD1_PACKET	CMD0_PACKET
-#define CMD2_PACKET	0x???
-#define CMDL_PACKET	CMD0_PACKET
-#define CMDV_PACKET	0x???
-
-/*==========================================================================*/
-/*==========================================================================*/
-#endif /* _LINUX_SBPCD_H */
-/*==========================================================================*/
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file. 
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 8
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -8
- * c-argdecl-indent: 8
- * c-label-offset: -8
- * c-continued-statement-offset: 8
- * c-continued-brace-offset: 0
- * End:
- */
diff --git a/drivers/cdrom/sjcd.c b/drivers/cdrom/sjcd.c
deleted file mode 100644
index 5409fca5bbfc..000000000000
--- a/drivers/cdrom/sjcd.c
+++ /dev/null
@@ -1,1815 +0,0 @@
-/* -- sjcd.c
- *
- *   Sanyo CD-ROM device driver implementation, Version 1.6
- *   Copyright (C) 1995  Vadim V. Model
- *
- *   model@cecmow.enet.dec.com
- *   vadim@rbrf.ru
- *   vadim@ipsun.ras.ru
- *
- *
- *  This driver is based on pre-works by Eberhard Moenkeberg (emoenke@gwdg.de);
- *  it was developed under use of mcd.c from Martin Harriss, with help of
- *  Eric van der Maarel (H.T.M.v.d.Maarel@marin.nl).
- *
- *  It is planned to include these routines into sbpcd.c later - to make
- *  a "mixed use" on one cable possible for all kinds of drives which use
- *  the SoundBlaster/Panasonic style CDROM interface. But today, the
- *  ability to install directly from CDROM is more important than flexibility.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History:
- *  1.1 First public release with kernel version 1.3.7.
- *      Written by Vadim Model.
- *  1.2 Added detection and configuration of cdrom interface
- *      on ISP16 soundcard.
- *      Allow for command line options: sjcd=<io_base>,<irq>,<dma>
- *  1.3 Some minor changes to README.sjcd.
- *  1.4 MSS Sound support!! Listen to a CD through the speakers.
- *  1.5 Module support and bugfixes.
- *      Tray locking.
- *  1.6 Removed ISP16 code from this driver.
- *      Allow only to set io base address on command line: sjcd=<io_base>
- *      Changes to Documentation/cdrom/sjcd
- *      Added cleanup after any error in the initialisation.
- *  1.7 Added code to set the sector size tables to prevent the bug present in 
- *      the previous version of this driver.  Coded added by Anthony Barbachan 
- *      from bugfix tip originally suggested by Alan Cox.
- *
- *  November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	             Removed init_module & cleanup_module in favor of 
- *	             module_init & module_exit.
- *	             Torben Mathiasen <tmm@image.dk>
- */
-
-#define SJCD_VERSION_MAJOR 1
-#define SJCD_VERSION_MINOR 7
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/cdrom.h>
-#include <linux/ioport.h>
-#include <linux/string.h>
-#include <linux/major.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/blkdev.h>
-#include "sjcd.h"
-
-static int sjcd_present = 0;
-static struct request_queue *sjcd_queue;
-
-#define MAJOR_NR SANYO_CDROM_MAJOR
-#define QUEUE (sjcd_queue)
-#define CURRENT elv_next_request(sjcd_queue)
-
-#define SJCD_BUF_SIZ 32		/* cdr-h94a has internal 64K buffer */
-
-/*
- * buffer for block size conversion
- */
-static char sjcd_buf[2048 * SJCD_BUF_SIZ];
-static volatile int sjcd_buf_bn[SJCD_BUF_SIZ], sjcd_next_bn;
-static volatile int sjcd_buf_in, sjcd_buf_out = -1;
-
-/*
- * Status.
- */
-static unsigned short sjcd_status_valid = 0;
-static unsigned short sjcd_door_closed;
-static unsigned short sjcd_door_was_open;
-static unsigned short sjcd_media_is_available;
-static unsigned short sjcd_media_is_changed;
-static unsigned short sjcd_toc_uptodate = 0;
-static unsigned short sjcd_command_failed;
-static volatile unsigned char sjcd_completion_status = 0;
-static volatile unsigned char sjcd_completion_error = 0;
-static unsigned short sjcd_command_is_in_progress = 0;
-static unsigned short sjcd_error_reported = 0;
-static DEFINE_SPINLOCK(sjcd_lock);
-
-static int sjcd_open_count;
-
-static int sjcd_audio_status;
-static struct sjcd_play_msf sjcd_playing;
-
-static int sjcd_base = SJCD_BASE_ADDR;
-
-module_param(sjcd_base, int, 0);
-
-static DECLARE_WAIT_QUEUE_HEAD(sjcd_waitq);
-
-/*
- * Data transfer.
- */
-static volatile unsigned short sjcd_transfer_is_active = 0;
-
-enum sjcd_transfer_state {
-	SJCD_S_IDLE = 0,
-	SJCD_S_START = 1,
-	SJCD_S_MODE = 2,
-	SJCD_S_READ = 3,
-	SJCD_S_DATA = 4,
-	SJCD_S_STOP = 5,
-	SJCD_S_STOPPING = 6
-};
-static enum sjcd_transfer_state sjcd_transfer_state = SJCD_S_IDLE;
-static long sjcd_transfer_timeout = 0;
-static int sjcd_read_count = 0;
-static unsigned char sjcd_mode = 0;
-
-#define SJCD_READ_TIMEOUT 5000
-
-#if defined( SJCD_GATHER_STAT )
-/*
- * Statistic.
- */
-static struct sjcd_stat statistic;
-#endif
-
-/*
- * Timer.
- */
-static DEFINE_TIMER(sjcd_delay_timer, NULL, 0, 0);
-
-#define SJCD_SET_TIMER( func, tmout )           \
-    ( sjcd_delay_timer.expires = jiffies+tmout,         \
-      sjcd_delay_timer.function = ( void * )func, \
-      add_timer( &sjcd_delay_timer ) )
-
-#define CLEAR_TIMER del_timer( &sjcd_delay_timer )
-
-/*
- * Set up device, i.e., use command line data to set
- * base address.
- */
-#ifndef MODULE
-static int __init sjcd_setup(char *str)
-{
-	int ints[2];
-	(void) get_options(str, ARRAY_SIZE(ints), ints);
-	if (ints[0] > 0)
-		sjcd_base = ints[1];
-
-	return 1;
-}
-
-__setup("sjcd=", sjcd_setup);
-
-#endif
-
-/*
- * Special converters.
- */
-static unsigned char bin2bcd(int bin)
-{
-	int u, v;
-
-	u = bin % 10;
-	v = bin / 10;
-	return (u | (v << 4));
-}
-
-static int bcd2bin(unsigned char bcd)
-{
-	return ((bcd >> 4) * 10 + (bcd & 0x0F));
-}
-
-static long msf2hsg(struct msf *mp)
-{
-	return (bcd2bin(mp->frame) + bcd2bin(mp->sec) * 75
-		+ bcd2bin(mp->min) * 4500 - 150);
-}
-
-static void hsg2msf(long hsg, struct msf *msf)
-{
-	hsg += 150;
-	msf->min = hsg / 4500;
-	hsg %= 4500;
-	msf->sec = hsg / 75;
-	msf->frame = hsg % 75;
-	msf->min = bin2bcd(msf->min);	/* convert to BCD */
-	msf->sec = bin2bcd(msf->sec);
-	msf->frame = bin2bcd(msf->frame);
-}
-
-/*
- * Send a command to cdrom. Invalidate status.
- */
-static void sjcd_send_cmd(unsigned char cmd)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_cmd( 0x%x )\n", cmd);
-#endif
-	outb(cmd, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Send a command with one arg to cdrom. Invalidate status.
- */
-static void sjcd_send_1_cmd(unsigned char cmd, unsigned char a)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_1_cmd( 0x%x, 0x%x )\n", cmd, a);
-#endif
-	outb(cmd, SJCDPORT(0));
-	outb(a, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Send a command with four args to cdrom. Invalidate status.
- */
-static void sjcd_send_4_cmd(unsigned char cmd, unsigned char a,
-			    unsigned char b, unsigned char c,
-			    unsigned char d)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_4_cmd( 0x%x )\n", cmd);
-#endif
-	outb(cmd, SJCDPORT(0));
-	outb(a, SJCDPORT(0));
-	outb(b, SJCDPORT(0));
-	outb(c, SJCDPORT(0));
-	outb(d, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Send a play or read command to cdrom. Invalidate Status.
- */
-static void sjcd_send_6_cmd(unsigned char cmd, struct sjcd_play_msf *pms)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: send_long_cmd( 0x%x )\n", cmd);
-#endif
-	outb(cmd, SJCDPORT(0));
-	outb(pms->start.min, SJCDPORT(0));
-	outb(pms->start.sec, SJCDPORT(0));
-	outb(pms->start.frame, SJCDPORT(0));
-	outb(pms->end.min, SJCDPORT(0));
-	outb(pms->end.sec, SJCDPORT(0));
-	outb(pms->end.frame, SJCDPORT(0));
-	sjcd_command_is_in_progress = 1;
-	sjcd_status_valid = 0;
-	sjcd_command_failed = 0;
-}
-
-/*
- * Get a value from the data port. Should not block, so we use a little
- * wait for a while. Returns 0 if OK.
- */
-static int sjcd_load_response(void *buf, int len)
-{
-	unsigned char *resp = (unsigned char *) buf;
-
-	for (; len; --len) {
-		int i;
-		for (i = 200;
-		     i-- && !SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1))););
-		if (i > 0)
-			*resp++ = (unsigned char) inb(SJCDPORT(0));
-		else
-			break;
-	}
-	return (len);
-}
-
-/*
- * Load and parse command completion status (drive info byte and maybe error).
- * Sorry, no error classification yet.
- */
-static void sjcd_load_status(void)
-{
-	sjcd_media_is_changed = 0;
-	sjcd_completion_error = 0;
-	sjcd_completion_status = inb(SJCDPORT(0));
-	if (sjcd_completion_status & SST_DOOR_OPENED) {
-		sjcd_door_closed = sjcd_media_is_available = 0;
-	} else {
-		sjcd_door_closed = 1;
-		if (sjcd_completion_status & SST_MEDIA_CHANGED)
-			sjcd_media_is_available = sjcd_media_is_changed =
-			    1;
-		else if (sjcd_completion_status & 0x0F) {
-			/*
-			 * OK, we seem to catch an error ...
-			 */
-			while (!SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1))));
-			sjcd_completion_error = inb(SJCDPORT(0));
-			if ((sjcd_completion_status & 0x08) &&
-			    (sjcd_completion_error & 0x40))
-				sjcd_media_is_available = 0;
-			else
-				sjcd_command_failed = 1;
-		} else
-			sjcd_media_is_available = 1;
-	}
-	/*
-	 * Ok, status loaded successfully.
-	 */
-	sjcd_status_valid = 1, sjcd_error_reported = 0;
-	sjcd_command_is_in_progress = 0;
-
-	/*
-	 * If the disk is changed, the TOC is not valid.
-	 */
-	if (sjcd_media_is_changed)
-		sjcd_toc_uptodate = 0;
-#if defined( SJCD_TRACE )
-	printk("SJCD: status %02x.%02x loaded.\n",
-	       (int) sjcd_completion_status, (int) sjcd_completion_error);
-#endif
-}
-
-/*
- * Read status from cdrom. Check to see if the status is available.
- */
-static int sjcd_check_status(void)
-{
-	/*
-	 * Try to load the response from cdrom into buffer.
-	 */
-	if (SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1)))) {
-		sjcd_load_status();
-		return (1);
-	} else {
-		/*
-		 * No status is available.
-		 */
-		return (0);
-	}
-}
-
-/*
- * This is just timeout counter, and nothing more. Surprised ? :-)
- */
-static volatile long sjcd_status_timeout;
-
-/*
- * We need about 10 seconds to wait. The longest command takes about 5 seconds
- * to probe the disk (usually after tray closed or drive reset). Other values
- * should be thought of for other commands.
- */
-#define SJCD_WAIT_FOR_STATUS_TIMEOUT 1000
-
-static void sjcd_status_timer(void)
-{
-	if (sjcd_check_status()) {
-		/*
-		 * The command completed and status is loaded, stop waiting.
-		 */
-		wake_up(&sjcd_waitq);
-	} else if (--sjcd_status_timeout <= 0) {
-		/*
-		 * We are timed out. 
-		 */
-		wake_up(&sjcd_waitq);
-	} else {
-		/*
-		 * We have still some time to wait. Try again.
-		 */
-		SJCD_SET_TIMER(sjcd_status_timer, 1);
-	}
-}
-
-/*
- * Wait for status for 10 sec approx. Returns non-positive when timed out.
- * Should not be used while reading data CDs.
- */
-static int sjcd_wait_for_status(void)
-{
-	sjcd_status_timeout = SJCD_WAIT_FOR_STATUS_TIMEOUT;
-	SJCD_SET_TIMER(sjcd_status_timer, 1);
-	sleep_on(&sjcd_waitq);
-#if defined( SJCD_DIAGNOSTIC ) || defined ( SJCD_TRACE )
-	if (sjcd_status_timeout <= 0)
-		printk("SJCD: Error Wait For Status.\n");
-#endif
-	return (sjcd_status_timeout);
-}
-
-static int sjcd_receive_status(void)
-{
-	int i;
-#if defined( SJCD_TRACE )
-	printk("SJCD: receive_status\n");
-#endif
-	/*
-	 * Wait a bit for status available.
-	 */
-	for (i = 200; i-- && (sjcd_check_status() == 0););
-	if (i < 0) {
-#if defined( SJCD_TRACE )
-		printk("SJCD: long wait for status\n");
-#endif
-		if (sjcd_wait_for_status() <= 0)
-			printk("SJCD: Timeout when read status.\n");
-		else
-			i = 0;
-	}
-	return (i);
-}
-
-/*
- * Load the status. Issue get status command and wait for status available.
- */
-static void sjcd_get_status(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: get_status\n");
-#endif
-	sjcd_send_cmd(SCMD_GET_STATUS);
-	sjcd_receive_status();
-}
-
-/*
- * Check the drive if the disk is changed. Should be revised.
- */
-static int sjcd_disk_change(struct gendisk *disk)
-{
-#if 0
-	printk("SJCD: sjcd_disk_change(%s)\n", disk->disk_name);
-#endif
-	if (!sjcd_command_is_in_progress)
-		sjcd_get_status();
-	return (sjcd_status_valid ? sjcd_media_is_changed : 0);
-}
-
-/*
- * Read the table of contents (TOC) and TOC header if necessary.
- * We assume that the drive contains no more than 99 toc entries.
- */
-static struct sjcd_hw_disk_info sjcd_table_of_contents[SJCD_MAX_TRACKS];
-static unsigned char sjcd_first_track_no, sjcd_last_track_no;
-#define sjcd_disk_length  sjcd_table_of_contents[0].un.track_msf
-
-static int sjcd_update_toc(void)
-{
-	struct sjcd_hw_disk_info info;
-	int i;
-#if defined( SJCD_TRACE )
-	printk("SJCD: update toc:\n");
-#endif
-	/*
-	 * check to see if we need to do anything
-	 */
-	if (sjcd_toc_uptodate)
-		return (0);
-
-	/*
-	 * Get the TOC start information.
-	 */
-	sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_1_TRACK);
-	sjcd_receive_status();
-
-	if (!sjcd_status_valid) {
-		printk("SJCD: cannot load status.\n");
-		return (-1);
-	}
-
-	if (!sjcd_media_is_available) {
-		printk("SJCD: no disk in drive\n");
-		return (-1);
-	}
-
-	if (!sjcd_command_failed) {
-		if (sjcd_load_response(&info, sizeof(info)) != 0) {
-			printk
-			    ("SJCD: cannot load response about TOC start.\n");
-			return (-1);
-		}
-		sjcd_first_track_no = bcd2bin(info.un.track_no);
-	} else {
-		printk("SJCD: get first failed\n");
-		return (-1);
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: TOC start 0x%02x ", sjcd_first_track_no);
-#endif
-	/*
-	 * Get the TOC finish information.
-	 */
-	sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_L_TRACK);
-	sjcd_receive_status();
-
-	if (!sjcd_status_valid) {
-		printk("SJCD: cannot load status.\n");
-		return (-1);
-	}
-
-	if (!sjcd_media_is_available) {
-		printk("SJCD: no disk in drive\n");
-		return (-1);
-	}
-
-	if (!sjcd_command_failed) {
-		if (sjcd_load_response(&info, sizeof(info)) != 0) {
-			printk
-			    ("SJCD: cannot load response about TOC finish.\n");
-			return (-1);
-		}
-		sjcd_last_track_no = bcd2bin(info.un.track_no);
-	} else {
-		printk("SJCD: get last failed\n");
-		return (-1);
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: TOC finish 0x%02x ", sjcd_last_track_no);
-#endif
-	for (i = sjcd_first_track_no; i <= sjcd_last_track_no; i++) {
-		/*
-		 * Get the first track information.
-		 */
-		sjcd_send_1_cmd(SCMD_GET_DISK_INFO, bin2bcd(i));
-		sjcd_receive_status();
-
-		if (!sjcd_status_valid) {
-			printk("SJCD: cannot load status.\n");
-			return (-1);
-		}
-
-		if (!sjcd_media_is_available) {
-			printk("SJCD: no disk in drive\n");
-			return (-1);
-		}
-
-		if (!sjcd_command_failed) {
-			if (sjcd_load_response(&sjcd_table_of_contents[i],
-					       sizeof(struct
-						      sjcd_hw_disk_info))
-			    != 0) {
-				printk
-				    ("SJCD: cannot load info for %d track\n",
-				     i);
-				return (-1);
-			}
-		} else {
-			printk("SJCD: get info %d failed\n", i);
-			return (-1);
-		}
-	}
-
-	/*
-	 * Get the disk length info.
-	 */
-	sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_D_SIZE);
-	sjcd_receive_status();
-
-	if (!sjcd_status_valid) {
-		printk("SJCD: cannot load status.\n");
-		return (-1);
-	}
-
-	if (!sjcd_media_is_available) {
-		printk("SJCD: no disk in drive\n");
-		return (-1);
-	}
-
-	if (!sjcd_command_failed) {
-		if (sjcd_load_response(&info, sizeof(info)) != 0) {
-			printk
-			    ("SJCD: cannot load response about disk size.\n");
-			return (-1);
-		}
-		sjcd_disk_length.min = info.un.track_msf.min;
-		sjcd_disk_length.sec = info.un.track_msf.sec;
-		sjcd_disk_length.frame = info.un.track_msf.frame;
-	} else {
-		printk("SJCD: get size failed\n");
-		return (1);
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: (%02x:%02x.%02x)\n", sjcd_disk_length.min,
-	       sjcd_disk_length.sec, sjcd_disk_length.frame);
-#endif
-	return (0);
-}
-
-/*
- * Load subchannel information.
- */
-static int sjcd_get_q_info(struct sjcd_hw_qinfo *qp)
-{
-	int s;
-#if defined( SJCD_TRACE )
-	printk("SJCD: load sub q\n");
-#endif
-	sjcd_send_cmd(SCMD_GET_QINFO);
-	s = sjcd_receive_status();
-	if (s < 0 || sjcd_command_failed || !sjcd_status_valid) {
-		sjcd_send_cmd(0xF2);
-		s = sjcd_receive_status();
-		if (s < 0 || sjcd_command_failed || !sjcd_status_valid)
-			return (-1);
-		sjcd_send_cmd(SCMD_GET_QINFO);
-		s = sjcd_receive_status();
-		if (s < 0 || sjcd_command_failed || !sjcd_status_valid)
-			return (-1);
-	}
-	if (sjcd_media_is_available)
-		if (sjcd_load_response(qp, sizeof(*qp)) == 0)
-			return (0);
-	return (-1);
-}
-
-/*
- * Start playing from the specified position.
- */
-static int sjcd_play(struct sjcd_play_msf *mp)
-{
-	struct sjcd_play_msf msf;
-
-	/*
-	 * Turn the device to play mode.
-	 */
-	sjcd_send_1_cmd(SCMD_SET_MODE, SCMD_MODE_PLAY);
-	if (sjcd_receive_status() < 0)
-		return (-1);
-
-	/*
-	 * Seek to the starting point.
-	 */
-	msf.start = mp->start;
-	msf.end.min = msf.end.sec = msf.end.frame = 0x00;
-	sjcd_send_6_cmd(SCMD_SEEK, &msf);
-	if (sjcd_receive_status() < 0)
-		return (-1);
-
-	/*
-	 * Start playing.
-	 */
-	sjcd_send_6_cmd(SCMD_PLAY, mp);
-	return (sjcd_receive_status());
-}
-
-/*
- * Tray control functions.
- */
-static int sjcd_tray_close(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_close\n");
-#endif
-	sjcd_send_cmd(SCMD_CLOSE_TRAY);
-	return (sjcd_receive_status());
-}
-
-static int sjcd_tray_lock(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_lock\n");
-#endif
-	sjcd_send_cmd(SCMD_LOCK_TRAY);
-	return (sjcd_receive_status());
-}
-
-static int sjcd_tray_unlock(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_unlock\n");
-#endif
-	sjcd_send_cmd(SCMD_UNLOCK_TRAY);
-	return (sjcd_receive_status());
-}
-
-static int sjcd_tray_open(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: tray_open\n");
-#endif
-	sjcd_send_cmd(SCMD_EJECT_TRAY);
-	return (sjcd_receive_status());
-}
-
-/*
- * Do some user commands.
- */
-static int sjcd_ioctl(struct inode *ip, struct file *fp,
-		      unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-#if defined( SJCD_TRACE )
-	printk("SJCD:ioctl\n");
-#endif
-
-	sjcd_get_status();
-	if (!sjcd_status_valid)
-		return (-EIO);
-	if (sjcd_update_toc() < 0)
-		return (-EIO);
-
-	switch (cmd) {
-	case CDROMSTART:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: start\n");
-#endif
-			return (0);
-		}
-
-	case CDROMSTOP:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: stop\n");
-#endif
-			sjcd_send_cmd(SCMD_PAUSE);
-			(void) sjcd_receive_status();
-			sjcd_audio_status = CDROM_AUDIO_NO_STATUS;
-			return (0);
-		}
-
-	case CDROMPAUSE:{
-			struct sjcd_hw_qinfo q_info;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: pause\n");
-#endif
-			if (sjcd_audio_status == CDROM_AUDIO_PLAY) {
-				sjcd_send_cmd(SCMD_PAUSE);
-				(void) sjcd_receive_status();
-				if (sjcd_get_q_info(&q_info) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_NO_STATUS;
-				} else {
-					sjcd_audio_status =
-					    CDROM_AUDIO_PAUSED;
-					sjcd_playing.start = q_info.abs;
-				}
-				return (0);
-			} else
-				return (-EINVAL);
-		}
-
-	case CDROMRESUME:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: resume\n");
-#endif
-			if (sjcd_audio_status == CDROM_AUDIO_PAUSED) {
-				/*
-				 * continue play starting at saved location
-				 */
-				if (sjcd_play(&sjcd_playing) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_ERROR;
-					return (-EIO);
-				} else {
-					sjcd_audio_status =
-					    CDROM_AUDIO_PLAY;
-					return (0);
-				}
-			} else
-				return (-EINVAL);
-		}
-
-	case CDROMPLAYTRKIND:{
-			struct cdrom_ti ti;
-			int s = -EFAULT;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: playtrkind\n");
-#endif
-			if (!copy_from_user(&ti, argp, sizeof(ti))) {
-				s = 0;
-				if (ti.cdti_trk0 < sjcd_first_track_no)
-					return (-EINVAL);
-				if (ti.cdti_trk1 > sjcd_last_track_no)
-					ti.cdti_trk1 = sjcd_last_track_no;
-				if (ti.cdti_trk0 > ti.cdti_trk1)
-					return (-EINVAL);
-
-				sjcd_playing.start =
-				    sjcd_table_of_contents[ti.cdti_trk0].
-				    un.track_msf;
-				sjcd_playing.end =
-				    (ti.cdti_trk1 <
-				     sjcd_last_track_no) ?
-				    sjcd_table_of_contents[ti.cdti_trk1 +
-							   1].un.
-				    track_msf : sjcd_table_of_contents[0].
-				    un.track_msf;
-
-				if (sjcd_play(&sjcd_playing) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_ERROR;
-					return (-EIO);
-				} else
-					sjcd_audio_status =
-					    CDROM_AUDIO_PLAY;
-			}
-			return (s);
-		}
-
-	case CDROMPLAYMSF:{
-			struct cdrom_msf sjcd_msf;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: playmsf\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_READ, argp, sizeof(sjcd_msf))
-			     		? 0 : -EFAULT) == 0) {
-				if (sjcd_audio_status == CDROM_AUDIO_PLAY) {
-					sjcd_send_cmd(SCMD_PAUSE);
-					(void) sjcd_receive_status();
-					sjcd_audio_status =
-					    CDROM_AUDIO_NO_STATUS;
-				}
-
-				if (copy_from_user(&sjcd_msf, argp,
-					       sizeof(sjcd_msf)))
-					return (-EFAULT);
-
-				sjcd_playing.start.min =
-				    bin2bcd(sjcd_msf.cdmsf_min0);
-				sjcd_playing.start.sec =
-				    bin2bcd(sjcd_msf.cdmsf_sec0);
-				sjcd_playing.start.frame =
-				    bin2bcd(sjcd_msf.cdmsf_frame0);
-				sjcd_playing.end.min =
-				    bin2bcd(sjcd_msf.cdmsf_min1);
-				sjcd_playing.end.sec =
-				    bin2bcd(sjcd_msf.cdmsf_sec1);
-				sjcd_playing.end.frame =
-				    bin2bcd(sjcd_msf.cdmsf_frame1);
-
-				if (sjcd_play(&sjcd_playing) < 0) {
-					sjcd_audio_status =
-					    CDROM_AUDIO_ERROR;
-					return (-EIO);
-				} else
-					sjcd_audio_status =
-					    CDROM_AUDIO_PLAY;
-			}
-			return (s);
-		}
-
-	case CDROMREADTOCHDR:{
-			struct cdrom_tochdr toc_header;
-#if defined (SJCD_TRACE )
-			printk("SJCD: ioctl: readtocheader\n");
-#endif
-			toc_header.cdth_trk0 = sjcd_first_track_no;
-			toc_header.cdth_trk1 = sjcd_last_track_no;
-			if (copy_to_user(argp, &toc_header,
-					 sizeof(toc_header)))
-				return -EFAULT;
-			return 0;
-		}
-
-	case CDROMREADTOCENTRY:{
-			struct cdrom_tocentry toc_entry;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: readtocentry\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_WRITE, argp, sizeof(toc_entry))
-			     		? 0 : -EFAULT) == 0) {
-				struct sjcd_hw_disk_info *tp;
-
-				if (copy_from_user(&toc_entry, argp,
-					       sizeof(toc_entry)))
-					return (-EFAULT);
-				if (toc_entry.cdte_track == CDROM_LEADOUT)
-					tp = &sjcd_table_of_contents[0];
-				else if (toc_entry.cdte_track <
-					 sjcd_first_track_no)
-					return (-EINVAL);
-				else if (toc_entry.cdte_track >
-					 sjcd_last_track_no)
-					return (-EINVAL);
-				else
-					tp = &sjcd_table_of_contents
-					    [toc_entry.cdte_track];
-
-				toc_entry.cdte_adr =
-				    tp->track_control & 0x0F;
-				toc_entry.cdte_ctrl =
-				    tp->track_control >> 4;
-
-				switch (toc_entry.cdte_format) {
-				case CDROM_LBA:
-					toc_entry.cdte_addr.lba =
-					    msf2hsg(&(tp->un.track_msf));
-					break;
-				case CDROM_MSF:
-					toc_entry.cdte_addr.msf.minute =
-					    bcd2bin(tp->un.track_msf.min);
-					toc_entry.cdte_addr.msf.second =
-					    bcd2bin(tp->un.track_msf.sec);
-					toc_entry.cdte_addr.msf.frame =
-					    bcd2bin(tp->un.track_msf.
-						    frame);
-					break;
-				default:
-					return (-EINVAL);
-				}
-				if (copy_to_user(argp, &toc_entry,
-						 sizeof(toc_entry)))
-					s = -EFAULT;
-			}
-			return (s);
-		}
-
-	case CDROMSUBCHNL:{
-			struct cdrom_subchnl subchnl;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: subchnl\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_WRITE, argp, sizeof(subchnl))
-			     		? 0 : -EFAULT) == 0) {
-				struct sjcd_hw_qinfo q_info;
-
-				if (copy_from_user(&subchnl, argp,
-					       sizeof(subchnl)))
-					return (-EFAULT);
-
-				if (sjcd_get_q_info(&q_info) < 0)
-					return (-EIO);
-
-				subchnl.cdsc_audiostatus =
-				    sjcd_audio_status;
-				subchnl.cdsc_adr =
-				    q_info.track_control & 0x0F;
-				subchnl.cdsc_ctrl =
-				    q_info.track_control >> 4;
-				subchnl.cdsc_trk =
-				    bcd2bin(q_info.track_no);
-				subchnl.cdsc_ind = bcd2bin(q_info.x);
-
-				switch (subchnl.cdsc_format) {
-				case CDROM_LBA:
-					subchnl.cdsc_absaddr.lba =
-					    msf2hsg(&(q_info.abs));
-					subchnl.cdsc_reladdr.lba =
-					    msf2hsg(&(q_info.rel));
-					break;
-				case CDROM_MSF:
-					subchnl.cdsc_absaddr.msf.minute =
-					    bcd2bin(q_info.abs.min);
-					subchnl.cdsc_absaddr.msf.second =
-					    bcd2bin(q_info.abs.sec);
-					subchnl.cdsc_absaddr.msf.frame =
-					    bcd2bin(q_info.abs.frame);
-					subchnl.cdsc_reladdr.msf.minute =
-					    bcd2bin(q_info.rel.min);
-					subchnl.cdsc_reladdr.msf.second =
-					    bcd2bin(q_info.rel.sec);
-					subchnl.cdsc_reladdr.msf.frame =
-					    bcd2bin(q_info.rel.frame);
-					break;
-				default:
-					return (-EINVAL);
-				}
-				if (copy_to_user(argp, &subchnl,
-					         sizeof(subchnl)))
-					s = -EFAULT;
-			}
-			return (s);
-		}
-
-	case CDROMVOLCTRL:{
-			struct cdrom_volctrl vol_ctrl;
-			int s;
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: volctrl\n");
-#endif
-			if ((s =
-			     access_ok(VERIFY_READ, argp, sizeof(vol_ctrl))
-			     		? 0 : -EFAULT) == 0) {
-				unsigned char dummy[4];
-
-				if (copy_from_user(&vol_ctrl, argp,
-					       sizeof(vol_ctrl)))
-					return (-EFAULT);
-				sjcd_send_4_cmd(SCMD_SET_VOLUME,
-						vol_ctrl.channel0, 0xFF,
-						vol_ctrl.channel1, 0xFF);
-				if (sjcd_receive_status() < 0)
-					return (-EIO);
-				(void) sjcd_load_response(dummy, 4);
-			}
-			return (s);
-		}
-
-	case CDROMEJECT:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: eject\n");
-#endif
-			if (!sjcd_command_is_in_progress) {
-				sjcd_tray_unlock();
-				sjcd_send_cmd(SCMD_EJECT_TRAY);
-				(void) sjcd_receive_status();
-			}
-			return (0);
-		}
-
-#if defined( SJCD_GATHER_STAT )
-	case 0xABCD:{
-#if defined( SJCD_TRACE )
-			printk("SJCD: ioctl: statistic\n");
-#endif
-			if (copy_to_user(argp, &statistic, sizeof(statistic)))
-				return -EFAULT;
-			return 0;
-		}
-#endif
-
-	default:
-		return (-EINVAL);
-	}
-}
-
-/*
- * Invalidate internal buffers of the driver.
- */
-static void sjcd_invalidate_buffers(void)
-{
-	int i;
-	for (i = 0; i < SJCD_BUF_SIZ; sjcd_buf_bn[i++] = -1);
-	sjcd_buf_out = -1;
-}
-
-/*
- * Take care of the different block sizes between cdrom and Linux.
- * When Linux gets variable block sizes this will probably go away.
- */
-
-static int current_valid(void)
-{
-        return CURRENT &&
-		CURRENT->cmd == READ &&
-		CURRENT->sector != -1;
-}
-
-static void sjcd_transfer(void)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: transfer:\n");
-#endif
-	if (current_valid()) {
-		while (CURRENT->nr_sectors) {
-			int i, bn = CURRENT->sector / 4;
-			for (i = 0;
-			     i < SJCD_BUF_SIZ && sjcd_buf_bn[i] != bn;
-			     i++);
-			if (i < SJCD_BUF_SIZ) {
-				int offs =
-				    (i * 4 + (CURRENT->sector & 3)) * 512;
-				int nr_sectors = 4 - (CURRENT->sector & 3);
-				if (sjcd_buf_out != i) {
-					sjcd_buf_out = i;
-					if (sjcd_buf_bn[i] != bn) {
-						sjcd_buf_out = -1;
-						continue;
-					}
-				}
-				if (nr_sectors > CURRENT->nr_sectors)
-					nr_sectors = CURRENT->nr_sectors;
-#if defined( SJCD_TRACE )
-				printk("SJCD: copy out\n");
-#endif
-				memcpy(CURRENT->buffer, sjcd_buf + offs,
-				       nr_sectors * 512);
-				CURRENT->nr_sectors -= nr_sectors;
-				CURRENT->sector += nr_sectors;
-				CURRENT->buffer += nr_sectors * 512;
-			} else {
-				sjcd_buf_out = -1;
-				break;
-			}
-		}
-	}
-#if defined( SJCD_TRACE )
-	printk("SJCD: transfer: done\n");
-#endif
-}
-
-static void sjcd_poll(void)
-{
-#if defined( SJCD_GATHER_STAT )
-	/*
-	 * Update total number of ticks.
-	 */
-	statistic.ticks++;
-	statistic.tticks[sjcd_transfer_state]++;
-#endif
-
-      ReSwitch:switch (sjcd_transfer_state) {
-
-	case SJCD_S_IDLE:{
-#if defined( SJCD_GATHER_STAT )
-			statistic.idle_ticks++;
-#endif
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_IDLE\n");
-#endif
-			return;
-		}
-
-	case SJCD_S_START:{
-#if defined( SJCD_GATHER_STAT )
-			statistic.start_ticks++;
-#endif
-			sjcd_send_cmd(SCMD_GET_STATUS);
-			sjcd_transfer_state =
-			    sjcd_mode ==
-			    SCMD_MODE_COOKED ? SJCD_S_READ : SJCD_S_MODE;
-			sjcd_transfer_timeout = 500;
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_START: goto SJCD_S_%s mode\n",
-			       sjcd_transfer_state ==
-			       SJCD_S_READ ? "READ" : "MODE");
-#endif
-			break;
-		}
-
-	case SJCD_S_MODE:{
-			if (sjcd_check_status()) {
-				/*
-				 * Previous command is completed.
-				 */
-				if (!sjcd_status_valid
-				    || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_MODE: pre-cmd failed: goto to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				sjcd_mode = 0;	/* unknown mode; should not be valid when failed */
-				sjcd_send_1_cmd(SCMD_SET_MODE,
-						SCMD_MODE_COOKED);
-				sjcd_transfer_state = SJCD_S_READ;
-				sjcd_transfer_timeout = 1000;
-#if defined( SJCD_TRACE )
-				printk
-				    ("SJCD_S_MODE: goto SJCD_S_READ mode\n");
-#endif
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.mode_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_READ:{
-			if (sjcd_status_valid ? 1 : sjcd_check_status()) {
-				/*
-				 * Previous command is completed.
-				 */
-				if (!sjcd_status_valid
-				    || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: pre-cmd failed: goto to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-				if (!sjcd_media_is_available) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: no disk: goto to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-				if (sjcd_mode != SCMD_MODE_COOKED) {
-					/*
-					 * We seem to come from set mode. So discard one byte of result.
-					 */
-					if (sjcd_load_response
-					    (&sjcd_mode, 1) != 0) {
-#if defined( SJCD_TRACE )
-						printk
-						    ("SJCD_S_READ: load failed: goto to SJCD_S_STOP mode\n");
-#endif
-						sjcd_transfer_state =
-						    SJCD_S_STOP;
-						goto ReSwitch;
-					}
-					if (sjcd_mode != SCMD_MODE_COOKED) {
-#if defined( SJCD_TRACE )
-						printk
-						    ("SJCD_S_READ: mode failed: goto to SJCD_S_STOP mode\n");
-#endif
-						sjcd_transfer_state =
-						    SJCD_S_STOP;
-						goto ReSwitch;
-					}
-				}
-
-				if (current_valid()) {
-					struct sjcd_play_msf msf;
-
-					sjcd_next_bn = CURRENT->sector / 4;
-					hsg2msf(sjcd_next_bn, &msf.start);
-					msf.end.min = 0;
-					msf.end.sec = 0;
-					msf.end.frame = sjcd_read_count =
-					    SJCD_BUF_SIZ;
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD: ---reading msf-address %x:%x:%x  %x:%x:%x\n",
-					     msf.start.min, msf.start.sec,
-					     msf.start.frame, msf.end.min,
-					     msf.end.sec, msf.end.frame);
-					printk
-					    ("sjcd_next_bn:%x buf_in:%x buf_out:%x buf_bn:%x\n",
-					     sjcd_next_bn, sjcd_buf_in,
-					     sjcd_buf_out,
-					     sjcd_buf_bn[sjcd_buf_in]);
-#endif
-					sjcd_send_6_cmd(SCMD_DATA_READ,
-							&msf);
-					sjcd_transfer_state = SJCD_S_DATA;
-					sjcd_transfer_timeout = 500;
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: go to SJCD_S_DATA mode\n");
-#endif
-				} else {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_READ: nothing to read: go to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.read_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_DATA:{
-			unsigned char stat;
-
-		      sjcd_s_data:stat =
-			    inb(SJCDPORT
-				(1));
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_DATA: status = 0x%02x\n", stat);
-#endif
-			if (SJCD_STATUS_AVAILABLE(stat)) {
-				/*
-				 * No data is waiting for us in the drive buffer. Status of operation
-				 * completion is available. Read and parse it.
-				 */
-				sjcd_load_status();
-
-				if (!sjcd_status_valid
-				    || sjcd_command_failed) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD: read block %d failed, maybe audio disk? Giving up\n",
-					     sjcd_next_bn);
-#endif
-					if (current_valid())
-						end_request(CURRENT, 0);
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_DATA: pre-cmd failed: go to SJCD_S_STOP mode\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				if (!sjcd_media_is_available) {
-					printk
-					    ("SJCD_S_DATA: no disk: go to SJCD_S_STOP mode\n");
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				sjcd_transfer_state = SJCD_S_READ;
-				goto ReSwitch;
-			} else if (SJCD_DATA_AVAILABLE(stat)) {
-				/*
-				 * One frame is read into device buffer. We must copy it to our memory.
-				 * Otherwise cdrom hangs up. Check to see if we have something to copy
-				 * to.
-				 */
-				if (!current_valid()
-				    && sjcd_buf_in == sjcd_buf_out) {
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD_S_DATA: nothing to read: go to SJCD_S_STOP mode\n");
-					printk
-					    (" ... all the date would be discarded\n");
-#endif
-					sjcd_transfer_state = SJCD_S_STOP;
-					goto ReSwitch;
-				}
-
-				/*
-				 * Everything seems to be OK. Just read the frame and recalculate
-				 * indices.
-				 */
-				sjcd_buf_bn[sjcd_buf_in] = -1;	/* ??? */
-				insb(SJCDPORT(2),
-				     sjcd_buf + 2048 * sjcd_buf_in, 2048);
-#if defined( SJCD_TRACE )
-				printk
-				    ("SJCD_S_DATA: next_bn=%d, buf_in=%d, buf_out=%d, buf_bn=%d\n",
-				     sjcd_next_bn, sjcd_buf_in,
-				     sjcd_buf_out,
-				     sjcd_buf_bn[sjcd_buf_in]);
-#endif
-				sjcd_buf_bn[sjcd_buf_in] = sjcd_next_bn++;
-				if (sjcd_buf_out == -1)
-					sjcd_buf_out = sjcd_buf_in;
-				if (++sjcd_buf_in == SJCD_BUF_SIZ)
-					sjcd_buf_in = 0;
-
-				/*
-				 * Only one frame is ready at time. So we should turn over to wait for
-				 * another frame. If we need that, of course.
-				 */
-				if (--sjcd_read_count == 0) {
-					/*
-					 * OK, request seems to be precessed. Continue transferring...
-					 */
-					if (!sjcd_transfer_is_active) {
-						while (current_valid()) {
-							/*
-							 * Continue transferring.
-							 */
-							sjcd_transfer();
-							if (CURRENT->
-							    nr_sectors ==
-							    0)
-								end_request
-								    (CURRENT, 1);
-							else
-								break;
-						}
-					}
-					if (current_valid() &&
-					    (CURRENT->sector / 4 <
-					     sjcd_next_bn
-					     || CURRENT->sector / 4 >
-					     sjcd_next_bn +
-					     SJCD_BUF_SIZ)) {
-#if defined( SJCD_TRACE )
-						printk
-						    ("SJCD_S_DATA: can't read: go to SJCD_S_STOP mode\n");
-#endif
-						sjcd_transfer_state =
-						    SJCD_S_STOP;
-						goto ReSwitch;
-					}
-				}
-				/*
-				 * Now we should turn around rather than wait for while.
-				 */
-				goto sjcd_s_data;
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.data_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_STOP:{
-			sjcd_read_count = 0;
-			sjcd_send_cmd(SCMD_STOP);
-			sjcd_transfer_state = SJCD_S_STOPPING;
-			sjcd_transfer_timeout = 500;
-#if defined( SJCD_GATHER_STAT )
-			statistic.stop_ticks++;
-#endif
-			break;
-		}
-
-	case SJCD_S_STOPPING:{
-			unsigned char stat;
-
-			stat = inb(SJCDPORT(1));
-#if defined( SJCD_TRACE )
-			printk("SJCD_S_STOP: status = 0x%02x\n", stat);
-#endif
-			if (SJCD_DATA_AVAILABLE(stat)) {
-				int i;
-#if defined( SJCD_TRACE )
-				printk("SJCD_S_STOP: discard data\n");
-#endif
-				/*
-				 * Discard all the data from the pipe. Foolish method.
-				 */
-				for (i = 2048; i--;
-				     (void) inb(SJCDPORT(2)));
-				sjcd_transfer_timeout = 500;
-			} else if (SJCD_STATUS_AVAILABLE(stat)) {
-				sjcd_load_status();
-				if (sjcd_status_valid
-				    && sjcd_media_is_changed) {
-					sjcd_toc_uptodate = 0;
-					sjcd_invalidate_buffers();
-				}
-				if (current_valid()) {
-					if (sjcd_status_valid)
-						sjcd_transfer_state =
-						    SJCD_S_READ;
-					else
-						sjcd_transfer_state =
-						    SJCD_S_START;
-				} else
-					sjcd_transfer_state = SJCD_S_IDLE;
-				goto ReSwitch;
-			}
-#if defined( SJCD_GATHER_STAT )
-			else
-				statistic.stopping_ticks++;
-#endif
-			break;
-		}
-
-	default:
-		printk("SJCD: poll: invalid state %d\n",
-		       sjcd_transfer_state);
-		return;
-	}
-
-	if (--sjcd_transfer_timeout == 0) {
-		printk("SJCD: timeout in state %d\n", sjcd_transfer_state);
-		while (current_valid())
-			end_request(CURRENT, 0);
-		sjcd_send_cmd(SCMD_STOP);
-		sjcd_transfer_state = SJCD_S_IDLE;
-		goto ReSwitch;
-	}
-
-	/*
-	 * Get back in some time. 1 should be replaced with count variable to
-	 * avoid unnecessary testings.
-	 */
-	SJCD_SET_TIMER(sjcd_poll, 1);
-}
-
-static void do_sjcd_request(request_queue_t * q)
-{
-#if defined( SJCD_TRACE )
-	printk("SJCD: do_sjcd_request(%ld+%ld)\n",
-	       CURRENT->sector, CURRENT->nr_sectors);
-#endif
-	sjcd_transfer_is_active = 1;
-	while (current_valid()) {
-		sjcd_transfer();
-		if (CURRENT->nr_sectors == 0)
-			end_request(CURRENT, 1);
-		else {
-			sjcd_buf_out = -1;	/* Want to read a block not in buffer */
-			if (sjcd_transfer_state == SJCD_S_IDLE) {
-				if (!sjcd_toc_uptodate) {
-					if (sjcd_update_toc() < 0) {
-						printk
-						    ("SJCD: transfer: discard\n");
-						while (current_valid())
-							end_request(CURRENT, 0);
-						break;
-					}
-				}
-				sjcd_transfer_state = SJCD_S_START;
-				SJCD_SET_TIMER(sjcd_poll, HZ / 100);
-			}
-			break;
-		}
-	}
-	sjcd_transfer_is_active = 0;
-#if defined( SJCD_TRACE )
-	printk
-	    ("sjcd_next_bn:%x sjcd_buf_in:%x sjcd_buf_out:%x sjcd_buf_bn:%x\n",
-	     sjcd_next_bn, sjcd_buf_in, sjcd_buf_out,
-	     sjcd_buf_bn[sjcd_buf_in]);
-	printk("do_sjcd_request ends\n");
-#endif
-}
-
-/*
- * Open the device special file. Check disk is in.
- */
-static int sjcd_open(struct inode *ip, struct file *fp)
-{
-	/*
-	 * Check the presence of device.
-	 */
-	if (!sjcd_present)
-		return (-ENXIO);
-
-	/*
-	 * Only read operations are allowed. Really? (:-)
-	 */
-	if (fp->f_mode & 2)
-		return (-EROFS);
-
-	if (sjcd_open_count == 0) {
-		int s, sjcd_open_tries;
-/* We don't know that, do we? */
-/*
-    sjcd_audio_status = CDROM_AUDIO_NO_STATUS;
-*/
-		sjcd_mode = 0;
-		sjcd_door_was_open = 0;
-		sjcd_transfer_state = SJCD_S_IDLE;
-		sjcd_invalidate_buffers();
-		sjcd_status_valid = 0;
-
-		/*
-		 * Strict status checking.
-		 */
-		for (sjcd_open_tries = 4; --sjcd_open_tries;) {
-			if (!sjcd_status_valid)
-				sjcd_get_status();
-			if (!sjcd_status_valid) {
-#if defined( SJCD_DIAGNOSTIC )
-				printk
-				    ("SJCD: open: timed out when check status.\n");
-#endif
-				goto err_out;
-			} else if (!sjcd_media_is_available) {
-#if defined( SJCD_DIAGNOSTIC )
-				printk("SJCD: open: no disk in drive\n");
-#endif
-				if (!sjcd_door_closed) {
-					sjcd_door_was_open = 1;
-#if defined( SJCD_TRACE )
-					printk
-					    ("SJCD: open: close the tray\n");
-#endif
-					s = sjcd_tray_close();
-					if (s < 0 || !sjcd_status_valid
-					    || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-						printk
-						    ("SJCD: open: tray close attempt failed\n");
-#endif
-						goto err_out;
-					}
-					continue;
-				} else
-					goto err_out;
-			}
-			break;
-		}
-		s = sjcd_tray_lock();
-		if (s < 0 || !sjcd_status_valid || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-			printk("SJCD: open: tray lock attempt failed\n");
-#endif
-			goto err_out;
-		}
-#if defined( SJCD_TRACE )
-		printk("SJCD: open: done\n");
-#endif
-	}
-
-	++sjcd_open_count;
-	return (0);
-
-      err_out:
-	return (-EIO);
-}
-
-/*
- * On close, we flush all sjcd blocks from the buffer cache.
- */
-static int sjcd_release(struct inode *inode, struct file *file)
-{
-	int s;
-
-#if defined( SJCD_TRACE )
-	printk("SJCD: release\n");
-#endif
-	if (--sjcd_open_count == 0) {
-		sjcd_invalidate_buffers();
-		s = sjcd_tray_unlock();
-		if (s < 0 || !sjcd_status_valid || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-			printk
-			    ("SJCD: release: tray unlock attempt failed.\n");
-#endif
-		}
-		if (sjcd_door_was_open) {
-			s = sjcd_tray_open();
-			if (s < 0 || !sjcd_status_valid
-			    || sjcd_command_failed) {
-#if defined( SJCD_DIAGNOSTIC )
-				printk
-				    ("SJCD: release: tray unload attempt failed.\n");
-#endif
-			}
-		}
-	}
-	return 0;
-}
-
-/*
- * A list of file operations allowed for this cdrom.
- */
-static struct block_device_operations sjcd_fops = {
-	.owner		= THIS_MODULE,
-	.open		= sjcd_open,
-	.release	= sjcd_release,
-	.ioctl		= sjcd_ioctl,
-	.media_changed	= sjcd_disk_change,
-};
-
-/*
- * Following stuff is intended for initialization of the cdrom. It
- * first looks for presence of device. If the device is present, it
- * will be reset. Then read the version of the drive and load status.
- * The version is two BCD-coded bytes.
- */
-static struct {
-	unsigned char major, minor;
-} sjcd_version;
-
-static struct gendisk *sjcd_disk;
-
-/*
- * Test for presence of drive and initialize it. Called at boot time.
- * Probe cdrom, find out version and status.
- */
-static int __init sjcd_init(void)
-{
-	int i;
-
-	printk(KERN_INFO
-	       "SJCD: Sanyo CDR-H94A cdrom driver version %d.%d.\n",
-	       SJCD_VERSION_MAJOR, SJCD_VERSION_MINOR);
-
-#if defined( SJCD_TRACE )
-	printk("SJCD: sjcd=0x%x: ", sjcd_base);
-#endif
-
-	if (register_blkdev(MAJOR_NR, "sjcd"))
-		return -EIO;
-
-	sjcd_queue = blk_init_queue(do_sjcd_request, &sjcd_lock);
-	if (!sjcd_queue)
-		goto out0;
-
-	blk_queue_hardsect_size(sjcd_queue, 2048);
-
-	sjcd_disk = alloc_disk(1);
-	if (!sjcd_disk) {
-		printk(KERN_ERR "SJCD: can't allocate disk");
-		goto out1;
-	}
-	sjcd_disk->major = MAJOR_NR,
-	sjcd_disk->first_minor = 0,
-	sjcd_disk->fops = &sjcd_fops,
-	sprintf(sjcd_disk->disk_name, "sjcd");
-
-	if (!request_region(sjcd_base, 4,"sjcd")) {
-		printk
-		    ("SJCD: Init failed, I/O port (%X) is already in use\n",
-		     sjcd_base);
-		goto out2;
-	}
-
-	/*
-	 * Check for card. Since we are booting now, we can't use standard
-	 * wait algorithm.
-	 */
-	printk(KERN_INFO "SJCD: Resetting: ");
-	sjcd_send_cmd(SCMD_RESET);
-	for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
-		unsigned long timer;
-
-		/*
-		 * Wait 10ms approx.
-		 */
-		for (timer = jiffies; time_before_eq(jiffies, timer););
-		if ((i % 100) == 0)
-			printk(".");
-		(void) sjcd_check_status();
-	}
-	if (i == 0 || sjcd_command_failed) {
-		printk(" reset failed, no drive found.\n");
-		goto out3;
-	} else
-		printk("\n");
-
-	/*
-	 * Get and print out cdrom version.
-	 */
-	printk(KERN_INFO "SJCD: Getting version: ");
-	sjcd_send_cmd(SCMD_GET_VERSION);
-	for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
-		unsigned long timer;
-
-		/*
-		 * Wait 10ms approx.
-		 */
-		for (timer = jiffies; time_before_eq(jiffies, timer););
-		if ((i % 100) == 0)
-			printk(".");
-		(void) sjcd_check_status();
-	}
-	if (i == 0 || sjcd_command_failed) {
-		printk(" get version failed, no drive found.\n");
-		goto out3;
-	}
-
-	if (sjcd_load_response(&sjcd_version, sizeof(sjcd_version)) == 0) {
-		printk(" %1x.%02x\n", (int) sjcd_version.major,
-		       (int) sjcd_version.minor);
-	} else {
-		printk(" read version failed, no drive found.\n");
-		goto out3;
-	}
-
-	/*
-	 * Check and print out the tray state. (if it is needed?).
-	 */
-	if (!sjcd_status_valid) {
-		printk(KERN_INFO "SJCD: Getting status: ");
-		sjcd_send_cmd(SCMD_GET_STATUS);
-		for (i = 1000; i > 0 && !sjcd_status_valid; --i) {
-			unsigned long timer;
-
-			/*
-			 * Wait 10ms approx.
-			 */
-			for (timer = jiffies;
-			     time_before_eq(jiffies, timer););
-			if ((i % 100) == 0)
-				printk(".");
-			(void) sjcd_check_status();
-		}
-		if (i == 0 || sjcd_command_failed) {
-			printk(" get status failed, no drive found.\n");
-			goto out3;
-		} else
-			printk("\n");
-	}
-
-	printk(KERN_INFO "SJCD: Status: port=0x%x.\n", sjcd_base);
-	sjcd_disk->queue = sjcd_queue;
-	add_disk(sjcd_disk);
-
-	sjcd_present++;
-	return (0);
-out3:
-	release_region(sjcd_base, 4);
-out2:
-	put_disk(sjcd_disk);
-out1:
-	blk_cleanup_queue(sjcd_queue);
-out0:
-	if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL))
-		printk("SJCD: cannot unregister device.\n");
-	return (-EIO);
-}
-
-static void __exit sjcd_exit(void)
-{
-	del_gendisk(sjcd_disk);
-	put_disk(sjcd_disk);
-	release_region(sjcd_base, 4);
-	blk_cleanup_queue(sjcd_queue);
-	if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL))
-		printk("SJCD: cannot unregister device.\n");
-	printk(KERN_INFO "SJCD: module: removed.\n");
-}
-
-module_init(sjcd_init);
-module_exit(sjcd_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(SANYO_CDROM_MAJOR);
diff --git a/drivers/cdrom/sjcd.h b/drivers/cdrom/sjcd.h
deleted file mode 100644
index 0aa5e714659d..000000000000
--- a/drivers/cdrom/sjcd.h
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Definitions for a Sanyo CD-ROM interface.
- *
- *   Copyright (C) 1995  Vadim V. Model
- *                                       model@cecmow.enet.dec.com
- *                                       vadim@rbrf.msk.su
- *                                       vadim@ipsun.ras.ru
- *                       Eric van der Maarel
- *                                       H.T.M.v.d.Maarel@marin.nl
- *
- *  This information is based on mcd.c from M. Harriss and sjcd102.lst from
- *  E. Moenkeberg.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __SJCD_H__
-#define __SJCD_H__
-
-/*
- * Change this to set the I/O port address as default. More flexibility
- * come with setup implementation.
- */
-#define SJCD_BASE_ADDR      0x340
-
-/*
- * Change this to set the irq as default. Really SANYO do not use interrupts
- * at all.
- */
-#define SJCD_INTR_NR        0
-
-/*
- * Change this to set the dma as default value. really SANYO does not use
- * direct memory access at all.
- */
-#define SJCD_DMA_NR         0
-
-/*
- * Macros which allow us to find out the status of the drive.
- */
-#define SJCD_STATUS_AVAILABLE( x ) (((x)&0x02)==0)
-#define SJCD_DATA_AVAILABLE( x )   (((x)&0x01)==0)
-
-/*
- * Port access macro. Three ports are available: S-data port (command port),
- * status port (read only) and D-data port (read only).
- */
-#define SJCDPORT( x )       ( sjcd_base + ( x ) )
-#define SJCD_STATUS_PORT    SJCDPORT( 1 )
-#define SJCD_S_DATA_PORT    SJCDPORT( 0 )
-#define SJCD_COMMAND_PORT   SJCDPORT( 0 )
-#define SJCD_D_DATA_PORT    SJCDPORT( 2 )
-
-/*
- * Drive info bits. Drive info available as first (mandatory) byte of
- * command completion status.
- */
-#define SST_NOT_READY       0x10        /* no disk in the drive (???) */
-#define SST_MEDIA_CHANGED   0x20        /* disk is changed */
-#define SST_DOOR_OPENED     0x40        /* door is open */
-
-/* commands */
-
-#define SCMD_EJECT_TRAY     0xD0        /* eject tray if not locked */
-#define SCMD_LOCK_TRAY      0xD2        /* lock tray when in */
-#define SCMD_UNLOCK_TRAY    0xD4        /* unlock tray when in */
-#define SCMD_CLOSE_TRAY     0xD6        /* load tray in */
-
-#define SCMD_RESET          0xFA        /* soft reset */
-#define SCMD_GET_STATUS     0x80
-#define SCMD_GET_VERSION    0xCC
-
-#define SCMD_DATA_READ      0xA0        /* are the same, depend on mode&args */
-#define SCMD_SEEK           0xA0
-#define SCMD_PLAY           0xA0
-
-#define SCMD_GET_QINFO      0xA8
-
-#define SCMD_SET_MODE       0xC4
-#define SCMD_MODE_PLAY      0xE0
-#define SCMD_MODE_COOKED    (0xF8 & ~0x20)
-#define SCMD_MODE_RAW       0xF9
-#define SCMD_MODE_x20_BIT   0x20        /* What is it for ? */
-
-#define SCMD_SET_VOLUME     0xAE
-#define SCMD_PAUSE          0xE0
-#define SCMD_STOP           0xE0
-
-#define SCMD_GET_DISK_INFO  0xAA
-
-/*
- * Some standard arguments for SCMD_GET_DISK_INFO.
- */
-#define SCMD_GET_1_TRACK    0xA0    /* get the first track information */
-#define SCMD_GET_L_TRACK    0xA1    /* get the last track information */
-#define SCMD_GET_D_SIZE     0xA2    /* get the whole disk information */
-
-/*
- * Borrowed from hd.c. Allows to optimize multiple port read commands.
- */
-#define S_READ_DATA( port, buf, nr )      insb( port, buf, nr )
-
-/*
- * We assume that there are no audio disks with TOC length more than this
- * number (I personally have never seen disks with more than 20 fragments).
- */
-#define SJCD_MAX_TRACKS		100
-
-struct msf {
-  unsigned char   min;
-  unsigned char   sec;
-  unsigned char   frame;
-};
-
-struct sjcd_hw_disk_info {
-  unsigned char track_control;
-  unsigned char track_no;
-  unsigned char x, y, z;
-  union {
-    unsigned char track_no;
-    struct msf track_msf;
-  } un;
-};
-
-struct sjcd_hw_qinfo {
-  unsigned char track_control;
-  unsigned char track_no;
-  unsigned char x;
-  struct msf rel;
-  struct msf abs;
-};
-
-struct sjcd_play_msf {
-  struct msf  start;
-  struct msf  end;
-};
-
-struct sjcd_disk_info {
-  unsigned char   first;
-  unsigned char   last;
-  struct msf      disk_length;
-  struct msf      first_track;
-};
-
-struct sjcd_toc {
-  unsigned char   ctrl_addr;
-  unsigned char   track;
-  unsigned char   point_index;
-  struct msf      track_time;
-  struct msf      disk_time;
-};
-
-#if defined( SJCD_GATHER_STAT )
-
-struct sjcd_stat {
-  int ticks;
-  int tticks[ 8 ];
-  int idle_ticks;
-  int start_ticks;
-  int mode_ticks;
-  int read_ticks;
-  int data_ticks;
-  int stop_ticks;
-  int stopping_ticks;
-};
-
-#endif
-
-#endif
diff --git a/drivers/cdrom/sonycd535.c b/drivers/cdrom/sonycd535.c
deleted file mode 100644
index f77ada933ea0..000000000000
--- a/drivers/cdrom/sonycd535.c
+++ /dev/null
@@ -1,1689 +0,0 @@
-/*
- * Sony CDU-535 interface device driver
- *
- * This is a modified version of the CDU-31A device driver (see below).
- * Changes were made using documentation for the CDU-531 (which Sony
- * assures me is very similar to the 535) and partial disassembly of the
- * DOS driver.  I used Minyard's driver and replaced the CDU-31A
- * commands with the CDU-531 commands.  This was complicated by a different
- * interface protocol with the drive.  The driver is still polled.
- *
- * Data transfer rate is about 110 Kb/sec, theoretical maximum is 150 Kb/sec.
- * I tried polling without the sony_sleep during the data transfers but
- * it did not speed things up any.
- *
- * 1993-05-23 (rgj) changed the major number to 21 to get rid of conflict
- * with CDU-31A driver.  This is the also the number from the Linux
- * Device Driver Registry for the Sony Drive.  Hope nobody else is using it.
- *
- * 1993-08-29 (rgj) remove the configuring of the interface board address
- * from the top level configuration, you have to modify it in this file.
- *
- * 1995-01-26 Made module-capable (Joel Katz <Stimpson@Panix.COM>)
- *
- * 1995-05-20
- *  Modified to support CDU-510/515 series
- *      (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>)
- *  Fixed to report verify_area() failures
- *      (Heiko Eissfeldt <heiko@colossus.escape.de>)
- *
- * 1995-06-01
- *  More changes to support CDU-510/515 series
- *      (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>)
- *
- * November 1999 -- Make kernel-parameter implementation work with 2.3.x 
- *	            Removed init_module & cleanup_module in favor of 
- *	            module_init & module_exit.
- *                  Torben Mathiasen <tmm@image.dk>
- *
- * September 2003 - Fix SMP support by removing cli/sti calls.
- *                  Using spinlocks with a wait_queue instead.
- *                  Felipe Damasio <felipewd@terra.com.br>
- *
- * Things to do:
- *  - handle errors and status better, put everything into a single word
- *  - use interrupts (code mostly there, but a big hole still missing)
- *  - handle multi-session CDs?
- *  - use DMA?
- *
- *  Known Bugs:
- *  -
- *
- *   Ken Pizzini (ken@halcyon.com)
- *
- * Original by:
- *   Ron Jeppesen (ronj.an@site007.saic.com)
- *
- *
- *------------------------------------------------------------------------
- * Sony CDROM interface device driver.
- *
- * Corey Minyard (minyard@wf-rch.cirr.com) (CDU-535 complaints to Ken above)
- *
- * Colossians 3:17
- *
- * The Sony interface device driver handles Sony interface CDROM
- * drives and provides a complete block-level interface as well as an
- * ioctl() interface compatible with the Sun (as specified in
- * include/linux/cdrom.h).  With this interface, CDROMs can be
- * accessed and standard audio CDs can be played back normally.
- *
- * This interface is (unfortunately) a polled interface.  This is
- * because most Sony interfaces are set up with DMA and interrupts
- * disables.  Some (like mine) do not even have the capability to
- * handle interrupts or DMA.  For this reason you will see a bit of
- * the following:
- *
- *   snap = jiffies;
- *   while (jiffies-snap < SONY_JIFFIES_TIMEOUT)
- *   {
- *		if (some_condition())
- *         break;
- *      sony_sleep();
- *   }
- *   if (some_condition not met)
- *   {
- *      return an_error;
- *   }
- *
- * This ugly hack waits for something to happen, sleeping a little
- * between every try.  (The conditional is written so that jiffies
- * wrap-around is handled properly.)
- *
- * One thing about these drives: They talk in MSF (Minute Second Frame) format.
- * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a
- * disk.  The funny thing is that these are sent to the drive in BCD, but the
- * interface wants to see them in decimal.  A lot of conversion goes on.
- *
- *  Copyright (C) 1993  Corey Minyard
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-# include <linux/module.h>
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#define REALLY_SLOW_IO
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-#include <linux/cdrom.h>
-
-#define MAJOR_NR CDU535_CDROM_MAJOR
-#include <linux/blkdev.h>
-
-#define sony535_cd_base_io sonycd535 /* for compatible parameter passing with "insmod" */
-#include "sonycd535.h"
-
-/*
- * this is the base address of the interface card for the Sony CDU-535
- * CDROM drive.  If your jumpers are set for an address other than
- * this one (the default), change the following line to the
- * proper address.
- */
-#ifndef CDU535_ADDRESS
-# define CDU535_ADDRESS			0x340
-#endif
-#ifndef CDU535_INTERRUPT
-# define CDU535_INTERRUPT		0
-#endif
-#ifndef CDU535_HANDLE
-# define CDU535_HANDLE			"cdu535"
-#endif
-#ifndef CDU535_MESSAGE_NAME
-# define CDU535_MESSAGE_NAME	"Sony CDU-535"
-#endif
-
-#define CDU535_BLOCK_SIZE	2048 
- 
-#ifndef MAX_SPINUP_RETRY
-# define MAX_SPINUP_RETRY		3	/* 1 is sufficient for most drives... */
-#endif
-#ifndef RETRY_FOR_BAD_STATUS
-# define RETRY_FOR_BAD_STATUS	100	/* in 10th of second */
-#endif
-
-#ifndef DEBUG
-# define DEBUG	1
-#endif
-
-/*
- *  SONY535_BUFFER_SIZE determines the size of internal buffer used
- *  by the drive.  It must be at least 2K and the larger the buffer
- *  the better the transfer rate.  It does however take system memory.
- *  On my system I get the following transfer rates using dd to read
- *  10 Mb off /dev/cdrom.
- *
- *    8K buffer      43 Kb/sec
- *   16K buffer      66 Kb/sec
- *   32K buffer      91 Kb/sec
- *   64K buffer     111 Kb/sec
- *  128K buffer     123 Kb/sec
- *  512K buffer     123 Kb/sec
- */
-#define SONY535_BUFFER_SIZE	(64*1024)
-
-/*
- *  if LOCK_DOORS is defined then the eject button is disabled while
- * the device is open.
- */
-#ifndef NO_LOCK_DOORS
-# define LOCK_DOORS
-#endif
-
-static int read_subcode(void);
-static void sony_get_toc(void);
-static int cdu_open(struct inode *inode, struct file *filp);
-static inline unsigned int int_to_bcd(unsigned int val);
-static unsigned int bcd_to_int(unsigned int bcd);
-static int do_sony_cmd(Byte * cmd, int nCmd, Byte status[2],
-					   Byte * response, int n_response, int ignoreStatusBit7);
-
-/* The base I/O address of the Sony Interface.  This is a variable (not a
-   #define) so it can be easily changed via some future ioctl() */
-static unsigned int sony535_cd_base_io = CDU535_ADDRESS;
-module_param(sony535_cd_base_io, int, 0);
-
-/*
- * The following are I/O addresses of the various registers for the drive.  The
- * comment for the base address also applies here.
- */
-static unsigned short select_unit_reg;
-static unsigned short result_reg;
-static unsigned short command_reg;
-static unsigned short read_status_reg;
-static unsigned short data_reg;
-
-static DEFINE_SPINLOCK(sonycd535_lock); /* queue lock */
-static struct request_queue *sonycd535_queue;
-
-static int initialized;			/* Has the drive been initialized? */
-static int sony_disc_changed = 1;	/* Has the disk been changed
-					   since the last check? */
-static int sony_toc_read;		/* Has the table of contents been
-					   read? */
-static unsigned int sony_buffer_size;	/* Size in bytes of the read-ahead
-					   buffer. */
-static unsigned int sony_buffer_sectors;	/* Size (in 2048 byte records) of
-						   the read-ahead buffer. */
-static unsigned int sony_usage;		/* How many processes have the
-					   drive open. */
-
-static int sony_first_block = -1;	/* First OS block (512 byte) in
-					   the read-ahead buffer */
-static int sony_last_block = -1;	/* Last OS block (512 byte) in
-					   the read-ahead buffer */
-
-static struct s535_sony_toc *sony_toc;	/* Points to the table of
-					   contents. */
-
-static struct s535_sony_subcode *last_sony_subcode;		/* Points to the last
-								   subcode address read */
-static Byte **sony_buffer;		/* Points to the pointers
-					   to the sector buffers */
-
-static int sony_inuse;			/* is the drive in use? Only one
-					   open at a time allowed */
-
-/*
- * The audio status uses the values from read subchannel data as specified
- * in include/linux/cdrom.h.
- */
-static int sony_audio_status = CDROM_AUDIO_NO_STATUS;
-
-/*
- * The following are a hack for pausing and resuming audio play.  The drive
- * does not work as I would expect it, if you stop it then start it again,
- * the drive seeks back to the beginning and starts over.  This holds the
- * position during a pause so a resume can restart it.  It uses the
- * audio status variable above to tell if it is paused.
- *   I just kept the CDU-31A driver behavior rather than using the PAUSE
- * command on the CDU-535.
- */
-static Byte cur_pos_msf[3];
-static Byte final_pos_msf[3];
-
-/* What IRQ is the drive using?  0 if none. */
-static int sony535_irq_used = CDU535_INTERRUPT;
-
-/* The interrupt handler will wake this queue up when it gets an interrupt. */
-static DECLARE_WAIT_QUEUE_HEAD(cdu535_irq_wait);
-
-
-/*
- * This routine returns 1 if the disk has been changed since the last
- * check or 0 if it hasn't.  Setting flag to 0 resets the changed flag.
- */
-static int
-cdu535_check_media_change(struct gendisk *disk)
-{
-	/* if driver is not initialized, always return 0 */
-	int retval = initialized ? sony_disc_changed : 0;
-	sony_disc_changed = 0;
-	return retval;
-}
-
-static inline void
-enable_interrupts(void)
-{
-#ifdef USE_IRQ
-	/*
-	 * This code was taken from cdu31a.c; it will not
-	 * directly work for the cdu535 as written...
-	 */
-	curr_control_reg |= ( SONY_ATTN_INT_EN_BIT
-						| SONY_RES_RDY_INT_EN_BIT
-						| SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-#endif
-}
-
-static inline void
-disable_interrupts(void)
-{
-#ifdef USE_IRQ
-	/*
-	 * This code was taken from cdu31a.c; it will not
-	 * directly work for the cdu535 as written...
-	 */
-	curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT
-						| SONY_RES_RDY_INT_EN_BIT
-						| SONY_DATA_RDY_INT_EN_BIT);
-	outb(curr_control_reg, sony_cd_control_reg);
-#endif
-}
-
-static irqreturn_t
-cdu535_interrupt(int irq, void *dev_id)
-{
-	disable_interrupts();
-	if (waitqueue_active(&cdu535_irq_wait)) {
-		wake_up(&cdu535_irq_wait);
-		return IRQ_HANDLED;
-	}
-	printk(CDU535_MESSAGE_NAME
-			": Got an interrupt but nothing was waiting\n");
-	return IRQ_NONE;
-}
-
-
-/*
- * Wait a little while.
- */
-static inline void
-sony_sleep(void)
-{
-	if (sony535_irq_used <= 0) {	/* poll */
-		yield();
-	} else {	/* Interrupt driven */
-		DEFINE_WAIT(wait);
-		
-		spin_lock_irq(&sonycd535_lock);
-		enable_interrupts();
-		prepare_to_wait(&cdu535_irq_wait, &wait, TASK_INTERRUPTIBLE);
-		spin_unlock_irq(&sonycd535_lock);
-		schedule();
-		finish_wait(&cdu535_irq_wait, &wait);
-	}
-}
-
-/*------------------start of SONY CDU535 very specific ---------------------*/
-
-/****************************************************************************
- * void select_unit( int unit_no )
- *
- *  Select the specified unit (0-3) so that subsequent commands reference it
- ****************************************************************************/
-static void
-select_unit(int unit_no)
-{
-	unsigned int select_mask = ~(1 << unit_no);
-	outb(select_mask, select_unit_reg);
-}
-
-/***************************************************************************
- * int read_result_reg( Byte *data_ptr )
- *
- *  Read a result byte from the Sony CDU controller, store in location pointed
- * to by data_ptr.  Return zero on success, TIME_OUT if we did not receive
- * data.
- ***************************************************************************/
-static int
-read_result_reg(Byte *data_ptr)
-{
-	unsigned long snap;
-	int read_status;
-
-	snap = jiffies;
-	while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
-		read_status = inb(read_status_reg);
-		if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) {
-#if DEBUG > 1
-			printk(CDU535_MESSAGE_NAME
-					": read_result_reg(): readStatReg = 0x%x\n", read_status);
-#endif
-			*data_ptr = inb(result_reg);
-			return 0;
-		} else {
-			sony_sleep();
-		}
-	}
-	printk(CDU535_MESSAGE_NAME " read_result_reg: TIME OUT!\n");
-	return TIME_OUT;
-}
-
-/****************************************************************************
- * int read_exec_status( Byte status[2] )
- *
- *  Read the execution status of the last command and put into status.
- * Handles reading second status word if available.  Returns 0 on success,
- * TIME_OUT on failure.
- ****************************************************************************/
-static int
-read_exec_status(Byte status[2])
-{
-	status[1] = 0;
-	if (read_result_reg(&(status[0])) != 0)
-		return TIME_OUT;
-	if ((status[0] & 0x80) != 0) {	/* byte two follows */
-		if (read_result_reg(&(status[1])) != 0)
-			return TIME_OUT;
-	}
-#if DEBUG > 1
-	printk(CDU535_MESSAGE_NAME ": read_exec_status: read 0x%x 0x%x\n",
-			status[0], status[1]);
-#endif
-	return 0;
-}
-
-/****************************************************************************
- * int check_drive_status( void )
- *
- *  Check the current drive status.  Using this before executing a command
- * takes care of the problem of unsolicited drive status-2 messages.
- * Add a check of the audio status if we think the disk is playing.
- ****************************************************************************/
-static int
-check_drive_status(void)
-{
-	Byte status, e_status[2];
-	int  CDD, ATN;
-	Byte cmd;
-
-	select_unit(0);
-	if (sony_audio_status == CDROM_AUDIO_PLAY) {	/* check status */
-		outb(SONY535_REQUEST_AUDIO_STATUS, command_reg);
-		if (read_result_reg(&status) == 0) {
-			switch (status) {
-			case 0x0:
-				break;		/* play in progress */
-			case 0x1:
-				break;		/* paused */
-			case 0x3:		/* audio play completed */
-			case 0x5:		/* play not requested */
-				sony_audio_status = CDROM_AUDIO_COMPLETED;
-				read_subcode();
-				break;
-			case 0x4:		/* error during play */
-				sony_audio_status = CDROM_AUDIO_ERROR;
-				break;
-			}
-		}
-	}
-	/* now check drive status */
-	outb(SONY535_REQUEST_DRIVE_STATUS_2, command_reg);
-	if (read_result_reg(&status) != 0)
-		return TIME_OUT;
-
-#if DEBUG > 1
-	printk(CDU535_MESSAGE_NAME ": check_drive_status() got 0x%x\n", status);
-#endif
-
-	if (status == 0)
-		return 0;
-
-	ATN = status & 0xf;
-	CDD = (status >> 4) & 0xf;
-
-	switch (ATN) {
-	case 0x0:
-		break;					/* go on to CDD stuff */
-	case SONY535_ATN_BUSY:
-		if (initialized)
-			printk(CDU535_MESSAGE_NAME " error: drive busy\n");
-		return CD_BUSY;
-	case SONY535_ATN_EJECT_IN_PROGRESS:
-		printk(CDU535_MESSAGE_NAME " error: eject in progress\n");
-		sony_audio_status = CDROM_AUDIO_INVALID;
-		return CD_BUSY;
-	case SONY535_ATN_RESET_OCCURRED:
-	case SONY535_ATN_DISC_CHANGED:
-	case SONY535_ATN_RESET_AND_DISC_CHANGED:
-#if DEBUG > 0
-		printk(CDU535_MESSAGE_NAME " notice: reset occurred or disc changed\n");
-#endif
-		sony_disc_changed = 1;
-		sony_toc_read = 0;
-		sony_audio_status = CDROM_AUDIO_NO_STATUS;
-		sony_first_block = -1;
-		sony_last_block = -1;
-		if (initialized) {
-			cmd = SONY535_SPIN_UP;
-			do_sony_cmd(&cmd, 1, e_status, NULL, 0, 0);
-			sony_get_toc();
-		}
-		return 0;
-	default:
-		printk(CDU535_MESSAGE_NAME " error: drive busy (ATN=0x%x)\n", ATN);
-		return CD_BUSY;
-	}
-	switch (CDD) {			/* the 531 docs are not helpful in decoding this */
-	case 0x0:				/* just use the values from the DOS driver */
-	case 0x2:
-	case 0xa:
-		break;				/* no error */
-	case 0xc:
-		printk(CDU535_MESSAGE_NAME
-				": check_drive_status(): CDD = 0xc! Not properly handled!\n");
-		return CD_BUSY;		/* ? */
-	default:
-		return CD_BUSY;
-	}
-	return 0;
-}	/* check_drive_status() */
-
-/*****************************************************************************
- * int do_sony_cmd( Byte *cmd, int n_cmd, Byte status[2],
- *                Byte *response, int n_response, int ignore_status_bit7 )
- *
- *  Generic routine for executing commands.  The command and its parameters
- *  should be placed in the cmd[] array, number of bytes in the command is
- *  stored in nCmd.  The response from the command will be stored in the
- *  response array.  The number of bytes you expect back (excluding status)
- *  should be passed in n_response.  Finally, some
- *  commands set bit 7 of the return status even when there is no second
- *  status byte, on these commands set ignoreStatusBit7 TRUE.
- *    If the command was sent and data received back, then we return 0,
- *  else we return TIME_OUT.  You still have to check the status yourself.
- *    You should call check_drive_status() before calling this routine
- *  so that you do not lose notifications of disk changes, etc.
- ****************************************************************************/
-static int
-do_sony_cmd(Byte * cmd, int n_cmd, Byte status[2],
-			Byte * response, int n_response, int ignore_status_bit7)
-{
-	int i;
-
-	/* write out the command */
-	for (i = 0; i < n_cmd; i++)
-		outb(cmd[i], command_reg);
-
-	/* read back the status */
-	if (read_result_reg(status) != 0)
-		return TIME_OUT;
-	if (!ignore_status_bit7 && ((status[0] & 0x80) != 0)) {
-		/* get second status byte */
-		if (read_result_reg(status + 1) != 0)
-			return TIME_OUT;
-	} else {
-		status[1] = 0;
-	}
-#if DEBUG > 2
-	printk(CDU535_MESSAGE_NAME ": do_sony_cmd %x: %x %x\n",
-			*cmd, status[0], status[1]);
-#endif
-
-	/* do not know about when I should read set of data and when not to */
-	if ((status[0] & ((ignore_status_bit7 ? 0x7f : 0xff) & 0x8f)) != 0)
-		return 0;
-
-	/* else, read in rest of data */
-	for (i = 0; 0 < n_response; n_response--, i++)
-		if (read_result_reg(response + i) != 0)
-			return TIME_OUT;
-	return 0;
-}	/* do_sony_cmd() */
-
-/**************************************************************************
- * int set_drive_mode( int mode, Byte status[2] )
- *
- *  Set the drive mode to the specified value (mode=0 is audio, mode=e0
- * is mode-1 CDROM
- **************************************************************************/
-static int
-set_drive_mode(int mode, Byte status[2])
-{
-	Byte cmd_buff[2];
-	Byte ret_buff[1];
-
-	cmd_buff[0] = SONY535_SET_DRIVE_MODE;
-	cmd_buff[1] = mode;
-	return do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1);
-}
-
-/***************************************************************************
- * int seek_and_read_N_blocks( Byte params[], int n_blocks, Byte status[2],
- *                             Byte *data_buff, int buff_size )
- *
- *  Read n_blocks of data from the CDROM starting at position params[0:2],
- *  number of blocks in stored in params[3:5] -- both these are already
- *  int bcd format.
- *  Transfer the data into the buffer pointed at by data_buff.  buff_size
- *  gives the number of bytes available in the buffer.
- *    The routine returns number of bytes read in if successful, otherwise
- *  it returns one of the standard error returns.
- ***************************************************************************/
-static int
-seek_and_read_N_blocks(Byte params[], int n_blocks, Byte status[2],
-					   Byte **buff, int buf_size)
-{
-	Byte cmd_buff[7];
-	int  i;
-	int  read_status;
-	unsigned long snap;
-	Byte *data_buff;
-	int  sector_count = 0;
-
-	if (buf_size < CDU535_BLOCK_SIZE * n_blocks)
-		return NO_ROOM;
-
-	set_drive_mode(SONY535_CDROM_DRIVE_MODE, status);
-
-	/* send command to read the data */
-	cmd_buff[0] = SONY535_SEEK_AND_READ_N_BLOCKS_1;
-	for (i = 0; i < 6; i++)
-		cmd_buff[i + 1] = params[i];
-	for (i = 0; i < 7; i++)
-		outb(cmd_buff[i], command_reg);
-
-	/* read back the data one block at a time */
-	while (0 < n_blocks--) {
-		/* wait for data to be ready */
-		int data_valid = 0;
-		snap = jiffies;
-		while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
-			read_status = inb(read_status_reg);
-			if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) {
-				read_exec_status(status);
-				return BAD_STATUS;
-			}
-			if ((read_status & SONY535_DATA_NOT_READY_BIT) == 0) {
-				/* data is ready, read it */
-				data_buff = buff[sector_count++];
-				for (i = 0; i < CDU535_BLOCK_SIZE; i++)
-					*data_buff++ = inb(data_reg);	/* unrolling this loop does not seem to help */
-				data_valid = 1;
-				break;			/* exit the timeout loop */
-			}
-			sony_sleep();		/* data not ready, sleep a while */
-		}
-		if (!data_valid)
-			return TIME_OUT;	/* if we reach this stage */
-	}
-
-	/* read all the data, now read the status */
-	if ((i = read_exec_status(status)) != 0)
-		return i;
-	return CDU535_BLOCK_SIZE * sector_count;
-}	/* seek_and_read_N_blocks() */
-
-/****************************************************************************
- * int request_toc_data( Byte status[2], struct s535_sony_toc *toc )
- *
- *  Read in the table of contents data.  Converts all the bcd data
- * into integers in the toc structure.
- ****************************************************************************/
-static int
-request_toc_data(Byte status[2], struct s535_sony_toc *toc)
-{
-	int  to_status;
-	int  i, j, n_tracks, track_no;
-	int  first_track_num, last_track_num;
-	Byte cmd_no = 0xb2;
-	Byte track_address_buffer[5];
-
-	/* read the fixed portion of the table of contents */
-	if ((to_status = do_sony_cmd(&cmd_no, 1, status, (Byte *) toc, 15, 1)) != 0)
-		return to_status;
-
-	/* convert the data into integers so we can use them */
-	first_track_num = bcd_to_int(toc->first_track_num);
-	last_track_num = bcd_to_int(toc->last_track_num);
-	n_tracks = last_track_num - first_track_num + 1;
-
-	/* read each of the track address descriptors */
-	for (i = 0; i < n_tracks; i++) {
-		/* read the descriptor into a temporary buffer */
-		for (j = 0; j < 5; j++) {
-			if (read_result_reg(track_address_buffer + j) != 0)
-				return TIME_OUT;
-			if (j == 1)		/* need to convert from bcd */
-				track_no = bcd_to_int(track_address_buffer[j]);
-		}
-		/* copy the descriptor to proper location - sonycd.c just fills */
-		memcpy(toc->tracks + i, track_address_buffer, 5);
-	}
-	return 0;
-}	/* request_toc_data() */
-
-/***************************************************************************
- * int spin_up_drive( Byte status[2] )
- *
- *  Spin up the drive (unless it is already spinning).
- ***************************************************************************/
-static int
-spin_up_drive(Byte status[2])
-{
-	Byte cmd;
-
-	/* first see if the drive is already spinning */
-	cmd = SONY535_REQUEST_DRIVE_STATUS_1;
-	if (do_sony_cmd(&cmd, 1, status, NULL, 0, 0) != 0)
-		return TIME_OUT;
-	if ((status[0] & SONY535_STATUS1_NOT_SPINNING) == 0)
-		return 0;	/* it's already spinning */
-
-	/* otherwise, give the spin-up command */
-	cmd = SONY535_SPIN_UP;
-	return do_sony_cmd(&cmd, 1, status, NULL, 0, 0);
-}
-
-/*--------------------end of SONY CDU535 very specific ---------------------*/
-
-/* Convert from an integer 0-99 to BCD */
-static inline unsigned int
-int_to_bcd(unsigned int val)
-{
-	int retval;
-
-	retval = (val / 10) << 4;
-	retval = retval | val % 10;
-	return retval;
-}
-
-
-/* Convert from BCD to an integer from 0-99 */
-static unsigned int
-bcd_to_int(unsigned int bcd)
-{
-	return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f);
-}
-
-
-/*
- * Convert a logical sector value (like the OS would want to use for
- * a block device) to an MSF format.
- */
-static void
-log_to_msf(unsigned int log, Byte *msf)
-{
-	log = log + LOG_START_OFFSET;
-	msf[0] = int_to_bcd(log / 4500);
-	log = log % 4500;
-	msf[1] = int_to_bcd(log / 75);
-	msf[2] = int_to_bcd(log % 75);
-}
-
-
-/*
- * Convert an MSF format to a logical sector.
- */
-static unsigned int
-msf_to_log(Byte *msf)
-{
-	unsigned int log;
-
-
-	log = bcd_to_int(msf[2]);
-	log += bcd_to_int(msf[1]) * 75;
-	log += bcd_to_int(msf[0]) * 4500;
-	log = log - LOG_START_OFFSET;
-
-	return log;
-}
-
-
-/*
- * Take in integer size value and put it into a buffer like
- * the drive would want to see a number-of-sector value.
- */
-static void
-size_to_buf(unsigned int size, Byte *buf)
-{
-	buf[0] = size / 65536;
-	size = size % 65536;
-	buf[1] = size / 256;
-	buf[2] = size % 256;
-}
-
-
-/*
- * The OS calls this to perform a read or write operation to the drive.
- * Write obviously fail.  Reads to a read ahead of sony_buffer_size
- * bytes to help speed operations.  This especially helps since the OS
- * may use 1024 byte blocks and the drive uses 2048 byte blocks.  Since most
- * data access on a CD is done sequentially, this saves a lot of operations.
- */
-static void
-do_cdu535_request(request_queue_t * q)
-{
-	struct request *req;
-	unsigned int read_size;
-	int  block;
-	int  nsect;
-	int  copyoff;
-	int  spin_up_retry;
-	Byte params[10];
-	Byte status[2];
-	Byte cmd[2];
-
-	while (1) {
-		req = elv_next_request(q);
-		if (!req)
-			return;
-
-		block = req->sector;
-		nsect = req->nr_sectors;
-		if (!blk_fs_request(req)) {
-			end_request(req, 0);
-			continue;
-		}
-		if (rq_data_dir(req) == WRITE) {
-			end_request(req, 0);
-			continue;
-		}
-		/*
-		 * If the block address is invalid or the request goes beyond
-		 * the end of the media, return an error.
-		 */
-		if (sony_toc->lead_out_start_lba <= (block/4)) {
-			end_request(req, 0);
-			return;
-		}
-		if (sony_toc->lead_out_start_lba <= ((block + nsect) / 4)) {
-			end_request(req, 0);
-			return;
-		}
-		while (0 < nsect) {
-			/*
-			 * If the requested sector is not currently in
-			 * the read-ahead buffer, it must be read in.
-			 */
-			if ((block < sony_first_block) || (sony_last_block < block)) {
-				sony_first_block = (block / 4) * 4;
-				log_to_msf(block / 4, params);
-				
-				/*
-				 * If the full read-ahead would go beyond the end of the media, trim
-				 * it back to read just till the end of the media.
-				 */
-				if (sony_toc->lead_out_start_lba <= ((block / 4) + sony_buffer_sectors)) {
-					sony_last_block = (sony_toc->lead_out_start_lba * 4) - 1;
-					read_size = sony_toc->lead_out_start_lba - (block / 4);
-				} else {
-					sony_last_block = sony_first_block + (sony_buffer_sectors * 4) - 1;
-					read_size = sony_buffer_sectors;
-				}
-				size_to_buf(read_size, &params[3]);
-				
-				/*
-				 * Read the data.  If the drive was not spinning,
-				 * spin it up and try some more.
-				 */
-				for (spin_up_retry=0 ;; ++spin_up_retry) {
-					/* This loop has been modified to support the Sony
-					 * CDU-510/515 series, thanks to Claudio Porfiri 
-					 * <C.Porfiri@nisms.tei.ericsson.se>.
-					 */
-					/*
-					 * This part is to deal with very slow hardware.  We
-					 * try at most MAX_SPINUP_RETRY times to read the same
-					 * block.  A check for seek_and_read_N_blocks' result is
-					 * performed; if the result is wrong, the CDROM's engine
-					 * is restarted and the operation is tried again.
-					 */
-					/*
-					 * 1995-06-01: The system got problems when downloading
-					 * from Slackware CDROM, the problem seems to be:
-					 * seek_and_read_N_blocks returns BAD_STATUS and we
-					 * should wait for a while before retrying, so a new
-					 * part was added to discriminate the return value from
-					 * seek_and_read_N_blocks for the various cases.
-					 */
-					int readStatus = seek_and_read_N_blocks(params, read_size,
-										status, sony_buffer, (read_size * CDU535_BLOCK_SIZE));
-					if (0 <= readStatus)	/* Good data; common case, placed first */
-						break;
-					if (readStatus == NO_ROOM || spin_up_retry == MAX_SPINUP_RETRY) {
-						/* give up */
-						if (readStatus == NO_ROOM)
-							printk(CDU535_MESSAGE_NAME " No room to read from CD\n");
-						else
-							printk(CDU535_MESSAGE_NAME " Read error: 0x%.2x\n",
-							       status[0]);
-						sony_first_block = -1;
-						sony_last_block = -1;
-						end_request(req, 0);
-						return;
-					}
-					if (readStatus == BAD_STATUS) {
-						/* Sleep for a while, then retry */
-						set_current_state(TASK_INTERRUPTIBLE);
-						spin_unlock_irq(&sonycd535_lock);
-						schedule_timeout(RETRY_FOR_BAD_STATUS*HZ/10);
-						spin_lock_irq(&sonycd535_lock);
-					}
-#if DEBUG > 0
-					printk(CDU535_MESSAGE_NAME
-					       " debug: calling spin up when reading data!\n");
-#endif
-					cmd[0] = SONY535_SPIN_UP;
-					do_sony_cmd(cmd, 1, status, NULL, 0, 0);
-				}
-			}
-			/*
-			 * The data is in memory now, copy it to the buffer and advance to the
-			 * next block to read.
-			 */
-			copyoff = block - sony_first_block;
-			memcpy(req->buffer,
-			       sony_buffer[copyoff / 4] + 512 * (copyoff % 4), 512);
-			
-			block += 1;
-			nsect -= 1;
-			req->buffer += 512;
-		}
-
-		end_request(req, 1);
-	}
-}
-
-/*
- * Read the table of contents from the drive and set sony_toc_read if
- * successful.
- */
-static void
-sony_get_toc(void)
-{
-	Byte status[2];
-	if (!sony_toc_read) {
-		/* do not call check_drive_status() from here since it can call this routine */
-		if (request_toc_data(status, sony_toc) < 0)
-			return;
-		sony_toc->lead_out_start_lba = msf_to_log(sony_toc->lead_out_start_msf);
-		sony_toc_read = 1;
-	}
-}
-
-
-/*
- * Search for a specific track in the table of contents.  track is
- * passed in bcd format
- */
-static int
-find_track(int track)
-{
-	int i;
-	int num_tracks;
-
-
-	num_tracks = bcd_to_int(sony_toc->last_track_num) -
-		bcd_to_int(sony_toc->first_track_num) + 1;
-	for (i = 0; i < num_tracks; i++) {
-		if (sony_toc->tracks[i].track == track) {
-			return i;
-		}
-	}
-
-	return -1;
-}
-
-/*
- * Read the subcode and put it int last_sony_subcode for future use.
- */
-static int
-read_subcode(void)
-{
-	Byte cmd = SONY535_REQUEST_SUB_Q_DATA;
-	Byte status[2];
-	int  dsc_status;
-
-	if (check_drive_status() != 0)
-		return -EIO;
-
-	if ((dsc_status = do_sony_cmd(&cmd, 1, status, (Byte *) last_sony_subcode,
-							   sizeof(struct s535_sony_subcode), 1)) != 0) {
-		printk(CDU535_MESSAGE_NAME " error 0x%.2x, %d (read_subcode)\n",
-				status[0], dsc_status);
-		return -EIO;
-	}
-	return 0;
-}
-
-
-/*
- * Get the subchannel info like the CDROMSUBCHNL command wants to see it.  If
- * the drive is playing, the subchannel needs to be read (since it would be
- * changing).  If the drive is paused or completed, the subcode information has
- * already been stored, just use that.  The ioctl call wants things in decimal
- * (not BCD), so all the conversions are done.
- */
-static int
-sony_get_subchnl_info(void __user *arg)
-{
-	struct cdrom_subchnl schi;
-
-	/* Get attention stuff */
-	if (check_drive_status() != 0)
-		return -EIO;
-
-	sony_get_toc();
-	if (!sony_toc_read) {
-		return -EIO;
-	}
-	if (copy_from_user(&schi, arg, sizeof schi))
-		return -EFAULT;
-
-	switch (sony_audio_status) {
-	case CDROM_AUDIO_PLAY:
-		if (read_subcode() < 0) {
-			return -EIO;
-		}
-		break;
-
-	case CDROM_AUDIO_PAUSED:
-	case CDROM_AUDIO_COMPLETED:
-		break;
-
-	case CDROM_AUDIO_NO_STATUS:
-		schi.cdsc_audiostatus = sony_audio_status;
-		if (copy_to_user(arg, &schi, sizeof schi))
-			return -EFAULT;
-		return 0;
-		break;
-
-	case CDROM_AUDIO_INVALID:
-	case CDROM_AUDIO_ERROR:
-	default:
-		return -EIO;
-	}
-
-	schi.cdsc_audiostatus = sony_audio_status;
-	schi.cdsc_adr = last_sony_subcode->address;
-	schi.cdsc_ctrl = last_sony_subcode->control;
-	schi.cdsc_trk = bcd_to_int(last_sony_subcode->track_num);
-	schi.cdsc_ind = bcd_to_int(last_sony_subcode->index_num);
-	if (schi.cdsc_format == CDROM_MSF) {
-		schi.cdsc_absaddr.msf.minute = bcd_to_int(last_sony_subcode->abs_msf[0]);
-		schi.cdsc_absaddr.msf.second = bcd_to_int(last_sony_subcode->abs_msf[1]);
-		schi.cdsc_absaddr.msf.frame = bcd_to_int(last_sony_subcode->abs_msf[2]);
-
-		schi.cdsc_reladdr.msf.minute = bcd_to_int(last_sony_subcode->rel_msf[0]);
-		schi.cdsc_reladdr.msf.second = bcd_to_int(last_sony_subcode->rel_msf[1]);
-		schi.cdsc_reladdr.msf.frame = bcd_to_int(last_sony_subcode->rel_msf[2]);
-	} else if (schi.cdsc_format == CDROM_LBA) {
-		schi.cdsc_absaddr.lba = msf_to_log(last_sony_subcode->abs_msf);
-		schi.cdsc_reladdr.lba = msf_to_log(last_sony_subcode->rel_msf);
-	}
-	return copy_to_user(arg, &schi, sizeof schi) ? -EFAULT : 0;
-}
-
-
-/*
- * The big ugly ioctl handler.
- */
-static int
-cdu_ioctl(struct inode *inode,
-		  struct file *file,
-		  unsigned int cmd,
-		  unsigned long arg)
-{
-	Byte status[2];
-	Byte cmd_buff[10], params[10];
-	int  i;
-	int  dsc_status;
-	void __user *argp = (void __user *)arg;
-
-	if (check_drive_status() != 0)
-		return -EIO;
-
-	switch (cmd) {
-	case CDROMSTART:			/* Spin up the drive */
-		if (spin_up_drive(status) < 0) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTART)\n",
-					status[0]);
-			return -EIO;
-		}
-		return 0;
-		break;
-
-	case CDROMSTOP:			/* Spin down the drive */
-		cmd_buff[0] = SONY535_HOLD;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-
-		/*
-		 * Spin the drive down, ignoring the error if the disk was
-		 * already not spinning.
-		 */
-		sony_audio_status = CDROM_AUDIO_NO_STATUS;
-		cmd_buff[0] = SONY535_SPIN_DOWN;
-		dsc_status = do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-		if (((dsc_status < 0) && (dsc_status != BAD_STATUS)) ||
-			((status[0] & ~(SONY535_STATUS1_NOT_SPINNING)) != 0)) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTOP)\n",
-					status[0]);
-			return -EIO;
-		}
-		return 0;
-		break;
-
-	case CDROMPAUSE:			/* Pause the drive */
-		cmd_buff[0] = SONY535_HOLD;		/* CDU-31 driver uses AUDIO_STOP, not pause */
-		if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPAUSE)\n",
-					status[0]);
-			return -EIO;
-		}
-		/* Get the current position and save it for resuming */
-		if (read_subcode() < 0) {
-			return -EIO;
-		}
-		cur_pos_msf[0] = last_sony_subcode->abs_msf[0];
-		cur_pos_msf[1] = last_sony_subcode->abs_msf[1];
-		cur_pos_msf[2] = last_sony_subcode->abs_msf[2];
-		sony_audio_status = CDROM_AUDIO_PAUSED;
-		return 0;
-		break;
-
-	case CDROMRESUME:			/* Start the drive after being paused */
-		set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
-		if (sony_audio_status != CDROM_AUDIO_PAUSED) {
-			return -EINVAL;
-		}
-		spin_up_drive(status);
-
-		/* Start the drive at the saved position. */
-		cmd_buff[0] = SONY535_PLAY_AUDIO;
-		cmd_buff[1] = 0;		/* play back starting at this address */
-		cmd_buff[2] = cur_pos_msf[0];
-		cmd_buff[3] = cur_pos_msf[1];
-		cmd_buff[4] = cur_pos_msf[2];
-		cmd_buff[5] = SONY535_PLAY_AUDIO;
-		cmd_buff[6] = 2;		/* set ending address */
-		cmd_buff[7] = final_pos_msf[0];
-		cmd_buff[8] = final_pos_msf[1];
-		cmd_buff[9] = final_pos_msf[2];
-		if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
-			(do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMRESUME)\n",
-					status[0]);
-			return -EIO;
-		}
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		return 0;
-		break;
-
-	case CDROMPLAYMSF:			/* Play starting at the given MSF address. */
-		if (copy_from_user(params, argp, 6))
-			return -EFAULT;
-		spin_up_drive(status);
-		set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
-		/* The parameters are given in int, must be converted */
-		for (i = 0; i < 3; i++) {
-			cmd_buff[2 + i] = int_to_bcd(params[i]);
-			cmd_buff[7 + i] = int_to_bcd(params[i + 3]);
-		}
-		cmd_buff[0] = SONY535_PLAY_AUDIO;
-		cmd_buff[1] = 0;		/* play back starting at this address */
-		/* cmd_buff[2-4] are filled in for loop above */
-		cmd_buff[5] = SONY535_PLAY_AUDIO;
-		cmd_buff[6] = 2;		/* set ending address */
-		/* cmd_buff[7-9] are filled in for loop above */
-		if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
-			(do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYMSF)\n",
-					status[0]);
-			return -EIO;
-		}
-		/* Save the final position for pauses and resumes */
-		final_pos_msf[0] = cmd_buff[7];
-		final_pos_msf[1] = cmd_buff[8];
-		final_pos_msf[2] = cmd_buff[9];
-		sony_audio_status = CDROM_AUDIO_PLAY;
-		return 0;
-		break;
-
-	case CDROMREADTOCHDR:		/* Read the table of contents header */
-		{
-			struct cdrom_tochdr __user *hdr = argp;
-			struct cdrom_tochdr loc_hdr;
-
-			sony_get_toc();
-			if (!sony_toc_read)
-				return -EIO;
-			loc_hdr.cdth_trk0 = bcd_to_int(sony_toc->first_track_num);
-			loc_hdr.cdth_trk1 = bcd_to_int(sony_toc->last_track_num);
-			if (copy_to_user(hdr, &loc_hdr, sizeof *hdr))
-				return -EFAULT;
-		}
-		return 0;
-		break;
-
-	case CDROMREADTOCENTRY:	/* Read a given table of contents entry */
-		{
-			struct cdrom_tocentry __user *entry = argp;
-			struct cdrom_tocentry loc_entry;
-			int  track_idx;
-			Byte *msf_val = NULL;
-
-			sony_get_toc();
-			if (!sony_toc_read) {
-				return -EIO;
-			}
-
-			if (copy_from_user(&loc_entry, entry, sizeof loc_entry))
-				return -EFAULT;
-
-			/* Lead out is handled separately since it is special. */
-			if (loc_entry.cdte_track == CDROM_LEADOUT) {
-				loc_entry.cdte_adr = 0 /*sony_toc->address2 */ ;
-				loc_entry.cdte_ctrl = sony_toc->control2;
-				msf_val = sony_toc->lead_out_start_msf;
-			} else {
-				track_idx = find_track(int_to_bcd(loc_entry.cdte_track));
-				if (track_idx < 0)
-					return -EINVAL;
-				loc_entry.cdte_adr = 0 /*sony_toc->tracks[track_idx].address */ ;
-				loc_entry.cdte_ctrl = sony_toc->tracks[track_idx].control;
-				msf_val = sony_toc->tracks[track_idx].track_start_msf;
-			}
-
-			/* Logical buffer address or MSF format requested? */
-			if (loc_entry.cdte_format == CDROM_LBA) {
-				loc_entry.cdte_addr.lba = msf_to_log(msf_val);
-			} else if (loc_entry.cdte_format == CDROM_MSF) {
-				loc_entry.cdte_addr.msf.minute = bcd_to_int(*msf_val);
-				loc_entry.cdte_addr.msf.second = bcd_to_int(*(msf_val + 1));
-				loc_entry.cdte_addr.msf.frame = bcd_to_int(*(msf_val + 2));
-			}
-			if (copy_to_user(entry, &loc_entry, sizeof *entry))
-				return -EFAULT;
-		}
-		return 0;
-		break;
-
-	case CDROMPLAYTRKIND:		/* Play a track.  This currently ignores index. */
-		{
-			struct cdrom_ti ti;
-			int track_idx;
-
-			sony_get_toc();
-			if (!sony_toc_read)
-				return -EIO;
-
-			if (copy_from_user(&ti, argp, sizeof ti))
-				return -EFAULT;
-			if ((ti.cdti_trk0 < sony_toc->first_track_num)
-				|| (sony_toc->last_track_num < ti.cdti_trk0)
-				|| (ti.cdti_trk1 < ti.cdti_trk0)) {
-				return -EINVAL;
-			}
-			track_idx = find_track(int_to_bcd(ti.cdti_trk0));
-			if (track_idx < 0)
-				return -EINVAL;
-			params[1] = sony_toc->tracks[track_idx].track_start_msf[0];
-			params[2] = sony_toc->tracks[track_idx].track_start_msf[1];
-			params[3] = sony_toc->tracks[track_idx].track_start_msf[2];
-			/*
-			 * If we want to stop after the last track, use the lead-out
-			 * MSF to do that.
-			 */
-			if (bcd_to_int(sony_toc->last_track_num) <= ti.cdti_trk1) {
-				log_to_msf(msf_to_log(sony_toc->lead_out_start_msf) - 1,
-						   &(params[4]));
-			} else {
-				track_idx = find_track(int_to_bcd(ti.cdti_trk1 + 1));
-				if (track_idx < 0)
-					return -EINVAL;
-				log_to_msf(msf_to_log(sony_toc->tracks[track_idx].track_start_msf) - 1,
-						   &(params[4]));
-			}
-			params[0] = 0x03;
-
-			spin_up_drive(status);
-
-			set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status);
-
-			/* Start the drive at the saved position. */
-			cmd_buff[0] = SONY535_PLAY_AUDIO;
-			cmd_buff[1] = 0;	/* play back starting at this address */
-			cmd_buff[2] = params[1];
-			cmd_buff[3] = params[2];
-			cmd_buff[4] = params[3];
-			cmd_buff[5] = SONY535_PLAY_AUDIO;
-			cmd_buff[6] = 2;	/* set ending address */
-			cmd_buff[7] = params[4];
-			cmd_buff[8] = params[5];
-			cmd_buff[9] = params[6];
-			if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) ||
-				(do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) {
-				printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYTRKIND)\n",
-						status[0]);
-				printk("... Params: %x %x %x %x %x %x %x\n",
-						params[0], params[1], params[2],
-						params[3], params[4], params[5], params[6]);
-				return -EIO;
-			}
-			/* Save the final position for pauses and resumes */
-			final_pos_msf[0] = params[4];
-			final_pos_msf[1] = params[5];
-			final_pos_msf[2] = params[6];
-			sony_audio_status = CDROM_AUDIO_PLAY;
-			return 0;
-		}
-
-	case CDROMSUBCHNL:			/* Get subchannel info */
-		return sony_get_subchnl_info(argp);
-
-	case CDROMVOLCTRL:			/* Volume control.  What volume does this change, anyway? */
-		{
-			struct cdrom_volctrl volctrl;
-
-			if (copy_from_user(&volctrl, argp, sizeof volctrl))
-				return -EFAULT;
-			cmd_buff[0] = SONY535_SET_VOLUME;
-			cmd_buff[1] = volctrl.channel0;
-			cmd_buff[2] = volctrl.channel1;
-			if (do_sony_cmd(cmd_buff, 3, status, NULL, 0, 0) != 0) {
-				printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMVOLCTRL)\n",
-						status[0]);
-				return -EIO;
-			}
-		}
-		return 0;
-
-	case CDROMEJECT:			/* Eject the drive */
-		cmd_buff[0] = SONY535_STOP;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-		cmd_buff[0] = SONY535_SPIN_DOWN;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-
-		sony_audio_status = CDROM_AUDIO_INVALID;
-		cmd_buff[0] = SONY535_EJECT_CADDY;
-		if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) {
-			printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMEJECT)\n",
-					status[0]);
-			return -EIO;
-		}
-		return 0;
-		break;
-
-	default:
-		return -EINVAL;
-	}
-}
-
-
-/*
- * Open the drive for operations.  Spin the drive up and read the table of
- * contents if these have not already been done.
- */
-static int
-cdu_open(struct inode *inode,
-		 struct file *filp)
-{
-	Byte status[2], cmd_buff[2];
-
-	if (sony_inuse)
-		return -EBUSY;
-	if (check_drive_status() != 0)
-		return -EIO;
-	sony_inuse = 1;
-
-	if (spin_up_drive(status) != 0) {
-		printk(CDU535_MESSAGE_NAME " error 0x%.2x (cdu_open, spin up)\n",
-				status[0]);
-		sony_inuse = 0;
-		return -EIO;
-	}
-	sony_get_toc();
-	if (!sony_toc_read) {
-		cmd_buff[0] = SONY535_SPIN_DOWN;
-		do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-		sony_inuse = 0;
-		return -EIO;
-	}
-	check_disk_change(inode->i_bdev);
-	sony_usage++;
-
-#ifdef LOCK_DOORS
-	/* disable the eject button while mounted */
-	cmd_buff[0] = SONY535_DISABLE_EJECT_BUTTON;
-	do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0);
-#endif
-
-	return 0;
-}
-
-
-/*
- * Close the drive.  Spin it down if no task is using it.  The spin
- * down will fail if playing audio, so audio play is OK.
- */
-static int
-cdu_release(struct inode *inode,
-			struct file *filp)
-{
-	Byte status[2], cmd_no;
-
-	sony_inuse = 0;
-
-	if (0 < sony_usage) {
-		sony_usage--;
-	}
-	if (sony_usage == 0) {
-		check_drive_status();
-
-		if (sony_audio_status != CDROM_AUDIO_PLAY) {
-			cmd_no = SONY535_SPIN_DOWN;
-			do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0);
-		}
-#ifdef LOCK_DOORS
-		/* enable the eject button after umount */
-		cmd_no = SONY535_ENABLE_EJECT_BUTTON;
-		do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0);
-#endif
-	}
-	return 0;
-}
-
-static struct block_device_operations cdu_fops =
-{
-	.owner		= THIS_MODULE,
-	.open		= cdu_open,
-	.release	= cdu_release,
-	.ioctl		= cdu_ioctl,
-	.media_changed	= cdu535_check_media_change,
-};
-
-static struct gendisk *cdu_disk;
-
-/*
- * Initialize the driver.
- */
-static int __init sony535_init(void)
-{
-	struct s535_sony_drive_config drive_config;
-	Byte cmd_buff[3];
-	Byte ret_buff[2];
-	Byte status[2];
-	unsigned long snap;
-	int  got_result = 0;
-	int  tmp_irq;
-	int  i;
-	int err;
-
-	/* Setting the base I/O address to 0 will disable it. */
-	if ((sony535_cd_base_io == 0xffff)||(sony535_cd_base_io == 0))
-		return 0;
-
-	/* Set up all the register locations */
-	result_reg = sony535_cd_base_io;
-	command_reg = sony535_cd_base_io;
-	data_reg = sony535_cd_base_io + 1;
-	read_status_reg = sony535_cd_base_io + 2;
-	select_unit_reg = sony535_cd_base_io + 3;
-
-#ifndef USE_IRQ
-	sony535_irq_used = 0;	/* polling only until this is ready... */
-#endif
-	/* we need to poll until things get initialized */
-	tmp_irq = sony535_irq_used;
-	sony535_irq_used = 0;
-
-#if DEBUG > 0
-	printk(KERN_INFO CDU535_MESSAGE_NAME ": probing base address %03X\n",
-			sony535_cd_base_io);
-#endif
-	/* look for the CD-ROM, follows the procedure in the DOS driver */
-	inb(select_unit_reg);
-	/* wait for 40 18 Hz ticks (reverse-engineered from DOS driver) */
-	schedule_timeout_interruptible((HZ+17)*40/18);
-	inb(result_reg);
-
-	outb(0, read_status_reg);	/* does a reset? */
-	snap = jiffies;
-	while (jiffies-snap < SONY_JIFFIES_TIMEOUT) {
-		select_unit(0);
-		if (inb(result_reg) != 0xff) {
-			got_result = 1;
-			break;
-		}
-		sony_sleep();
-	}
-
-	if (!got_result || check_drive_status() == TIME_OUT)
-		goto Enodev;
-
-	/* CD-ROM drive responded --  get the drive configuration */
-	cmd_buff[0] = SONY535_INQUIRY;
-	if (do_sony_cmd(cmd_buff, 1, status, (Byte *)&drive_config, 28, 1) != 0)
-		goto Enodev;
-
-	/* was able to get the configuration,
-	 * set drive mode as rest of init
-	 */
-#if DEBUG > 0
-	/* 0x50 == CADDY_NOT_INSERTED | NOT_SPINNING */
-	if ( (status[0] & 0x7f) != 0 && (status[0] & 0x7f) != 0x50 )
-		printk(CDU535_MESSAGE_NAME
-				"Inquiry command returned status = 0x%x\n", status[0]);
-#endif
-	/* now ready to use interrupts, if available */
-	sony535_irq_used = tmp_irq;
-
-	/* A negative sony535_irq_used will attempt an autoirq. */
-	if (sony535_irq_used < 0) {
-		unsigned long irq_mask, delay;
-
-		irq_mask = probe_irq_on();
-		enable_interrupts();
-		outb(0, read_status_reg);	/* does a reset? */
-		delay = jiffies + HZ/10;
-		while (time_before(jiffies, delay)) ;
-
-		sony535_irq_used = probe_irq_off(irq_mask);
-		disable_interrupts();
-	}
-	if (sony535_irq_used > 0) {
-	    if (request_irq(sony535_irq_used, cdu535_interrupt,
-						IRQF_DISABLED, CDU535_HANDLE, NULL)) {
-			printk("Unable to grab IRQ%d for the " CDU535_MESSAGE_NAME
-					" driver; polling instead.\n", sony535_irq_used);
-			sony535_irq_used = 0;
-		}
-	}
-	cmd_buff[0] = SONY535_SET_DRIVE_MODE;
-	cmd_buff[1] = 0x0;	/* default audio */
-	if (do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1) != 0)
-		goto Enodev_irq;
-
-	/* set the drive mode successful, we are set! */
-	sony_buffer_size = SONY535_BUFFER_SIZE;
-	sony_buffer_sectors = sony_buffer_size / CDU535_BLOCK_SIZE;
-
-	printk(KERN_INFO CDU535_MESSAGE_NAME " I/F CDROM : %8.8s %16.16s %4.4s",
-		   drive_config.vendor_id,
-		   drive_config.product_id,
-		   drive_config.product_rev_level);
-	printk("  base address %03X, ", sony535_cd_base_io);
-	if (tmp_irq > 0)
-		printk("IRQ%d, ", tmp_irq);
-	printk("using %d byte buffer\n", sony_buffer_size);
-
-	if (register_blkdev(MAJOR_NR, CDU535_HANDLE)) {
-		err = -EIO;
-		goto out1;
-	}
-	sonycd535_queue = blk_init_queue(do_cdu535_request, &sonycd535_lock);
-	if (!sonycd535_queue) {
-		err = -ENOMEM;
-		goto out1a;
-	}
-
-	blk_queue_hardsect_size(sonycd535_queue, CDU535_BLOCK_SIZE);
-	sony_toc = kmalloc(sizeof(struct s535_sony_toc), GFP_KERNEL);
-	err = -ENOMEM;
-	if (!sony_toc)
-		goto out2;
-	last_sony_subcode = kmalloc(sizeof(struct s535_sony_subcode), GFP_KERNEL);
-	if (!last_sony_subcode)
-		goto out3;
-	sony_buffer = kmalloc(sizeof(Byte *) * sony_buffer_sectors, GFP_KERNEL);
-	if (!sony_buffer)
-		goto out4;
-	for (i = 0; i < sony_buffer_sectors; i++) {
-		sony_buffer[i] = kmalloc(CDU535_BLOCK_SIZE, GFP_KERNEL);
-		if (!sony_buffer[i]) {
-			while (--i>=0)
-				kfree(sony_buffer[i]);
-			goto out5;
-		}
-	}
-	initialized = 1;
-
-	cdu_disk = alloc_disk(1);
-	if (!cdu_disk)
-		goto out6;
-	cdu_disk->major = MAJOR_NR;
-	cdu_disk->first_minor = 0;
-	cdu_disk->fops = &cdu_fops;
-	sprintf(cdu_disk->disk_name, "cdu");
-
-	if (!request_region(sony535_cd_base_io, 4, CDU535_HANDLE)) {
-		printk(KERN_WARNING"sonycd535: Unable to request region 0x%x\n",
-			sony535_cd_base_io);
-		goto out7;
-	}
-	cdu_disk->queue = sonycd535_queue;
-	add_disk(cdu_disk);
-	return 0;
-
-out7:
-	put_disk(cdu_disk);
-out6:
-	for (i = 0; i < sony_buffer_sectors; i++)
-		kfree(sony_buffer[i]);
-out5:
-	kfree(sony_buffer);
-out4:
-	kfree(last_sony_subcode);
-out3:
-	kfree(sony_toc);
-out2:
-	blk_cleanup_queue(sonycd535_queue);
-out1a:
-	unregister_blkdev(MAJOR_NR, CDU535_HANDLE);
-out1:
-	if (sony535_irq_used)
-		free_irq(sony535_irq_used, NULL);
-	return err;
-Enodev_irq:
-	if (sony535_irq_used)
-		free_irq(sony535_irq_used, NULL);
-Enodev:
-	printk("Did not find a " CDU535_MESSAGE_NAME " drive\n");
-	return -EIO;
-}
-
-#ifndef MODULE
-
-/*
- * accept "kernel command line" parameters
- * (added by emoenke@gwdg.de)
- *
- * use: tell LILO:
- *                 sonycd535=0x320
- *
- * the address value has to be the existing CDROM port address.
- */
-static int __init
-sonycd535_setup(char *strings)
-{
-	int ints[3];
-	(void)get_options(strings, ARRAY_SIZE(ints), ints);
-	/* if IRQ change and default io base desired,
-	 * then call with io base of 0
-	 */
-	if (ints[0] > 0)
-		if (ints[1] != 0)
-			sony535_cd_base_io = ints[1];
-	if (ints[0] > 1)
-		sony535_irq_used = ints[2];
-	if ((strings != NULL) && (*strings != '\0'))
-		printk(CDU535_MESSAGE_NAME
-				": Warning: Unknown interface type: %s\n", strings);
-				
-	return 1;
-}
-
-__setup("sonycd535=", sonycd535_setup);
-
-#endif /* MODULE */
-
-static void __exit
-sony535_exit(void)
-{
-	int i;
-
-	release_region(sony535_cd_base_io, 4);
-	for (i = 0; i < sony_buffer_sectors; i++)
-		kfree(sony_buffer[i]);
-	kfree(sony_buffer);
-	kfree(last_sony_subcode);
-	kfree(sony_toc);
-	del_gendisk(cdu_disk);
-	put_disk(cdu_disk);
-	blk_cleanup_queue(sonycd535_queue);
-	if (unregister_blkdev(MAJOR_NR, CDU535_HANDLE) == -EINVAL)
-		printk("Uh oh, couldn't unregister " CDU535_HANDLE "\n");
-	else
-		printk(KERN_INFO CDU535_HANDLE " module released\n");
-}
-
-module_init(sony535_init);
-module_exit(sony535_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(CDU535_CDROM_MAJOR);
diff --git a/drivers/cdrom/sonycd535.h b/drivers/cdrom/sonycd535.h
deleted file mode 100644
index 5dea1ef168d6..000000000000
--- a/drivers/cdrom/sonycd535.h
+++ /dev/null
@@ -1,183 +0,0 @@
-#ifndef SONYCD535_H
-#define SONYCD535_H
-
-/*
- * define all the commands recognized by the CDU-531/5
- */
-#define SONY535_REQUEST_DRIVE_STATUS_1		(0x80)
-#define SONY535_REQUEST_SENSE			(0x82)
-#define SONY535_REQUEST_DRIVE_STATUS_2		(0x84)
-#define SONY535_REQUEST_ERROR_STATUS		(0x86)
-#define SONY535_REQUEST_AUDIO_STATUS		(0x88)
-#define SONY535_INQUIRY				(0x8a)
-
-#define SONY535_SET_INACTIVITY_TIME		(0x90)
-
-#define SONY535_SEEK_AND_READ_N_BLOCKS_1	(0xa0)
-#define SONY535_SEEK_AND_READ_N_BLOCKS_2	(0xa4)
-#define SONY535_PLAY_AUDIO			(0xa6)
-
-#define SONY535_REQUEST_DISC_CAPACITY		(0xb0)
-#define SONY535_REQUEST_TOC_DATA		(0xb2)
-#define SONY535_REQUEST_SUB_Q_DATA		(0xb4)
-#define SONY535_REQUEST_ISRC			(0xb6)
-#define SONY535_REQUEST_UPC_EAN			(0xb8)
-
-#define SONY535_SET_DRIVE_MODE			(0xc0)
-#define SONY535_REQUEST_DRIVE_MODE		(0xc2)
-#define SONY535_SET_RETRY_COUNT			(0xc4)
-
-#define SONY535_DIAGNOSTIC_1			(0xc6)
-#define SONY535_DIAGNOSTIC_4			(0xcc)
-#define SONY535_DIAGNOSTIC_5			(0xce)
-
-#define SONY535_EJECT_CADDY			(0xd0)
-#define SONY535_DISABLE_EJECT_BUTTON		(0xd2)
-#define SONY535_ENABLE_EJECT_BUTTON		(0xd4)
-
-#define SONY535_HOLD				(0xe0)
-#define SONY535_AUDIO_PAUSE_ON_OFF		(0xe2)
-#define SONY535_SET_VOLUME			(0xe8)
-
-#define SONY535_STOP				(0xf0)
-#define SONY535_SPIN_UP				(0xf2)
-#define SONY535_SPIN_DOWN			(0xf4)
-
-#define SONY535_CLEAR_PARAMETERS		(0xf6)
-#define SONY535_CLEAR_ENDING_ADDRESS		(0xf8)
-
-/*
- * define some masks
- */
-#define SONY535_DATA_NOT_READY_BIT		(0x1)
-#define SONY535_RESULT_NOT_READY_BIT		(0x2)
-
-/*
- *  drive status 1
- */
-#define SONY535_STATUS1_COMMAND_ERROR		(0x1)
-#define SONY535_STATUS1_DATA_ERROR		(0x2)
-#define SONY535_STATUS1_SEEK_ERROR		(0x4)
-#define SONY535_STATUS1_DISC_TYPE_ERROR		(0x8)
-#define SONY535_STATUS1_NOT_SPINNING		(0x10)
-#define SONY535_STATUS1_EJECT_BUTTON_PRESSED	(0x20)
-#define SONY535_STATUS1_CADDY_NOT_INSERTED	(0x40)
-#define SONY535_STATUS1_BYTE_TWO_FOLLOWS	(0x80)
-
-/*
- * drive status 2
- */
-#define SONY535_CDD_LOADING_ERROR		(0x7)
-#define SONY535_CDD_NO_DISC			(0x8)
-#define SONY535_CDD_UNLOADING_ERROR		(0x9)
-#define SONY535_CDD_CADDY_NOT_INSERTED		(0xd)
-#define SONY535_ATN_RESET_OCCURRED		(0x2)
-#define SONY535_ATN_DISC_CHANGED		(0x4)
-#define SONY535_ATN_RESET_AND_DISC_CHANGED	(0x6)
-#define SONY535_ATN_EJECT_IN_PROGRESS		(0xe)
-#define SONY535_ATN_BUSY			(0xf)
-
-/*
- * define some parameters
- */
-#define SONY535_AUDIO_DRIVE_MODE		(0)
-#define SONY535_CDROM_DRIVE_MODE		(0xe0)
-
-#define SONY535_PLAY_OP_PLAYBACK		(0)
-#define SONY535_PLAY_OP_ENTER_HOLD		(1)
-#define SONY535_PLAY_OP_SET_AUDIO_ENDING_ADDR	(2)
-#define SONY535_PLAY_OP_SCAN_FORWARD		(3)
-#define SONY535_PLAY_OP_SCAN_BACKWARD		(4)
-
-/*
- *  convert from msf format to block number 
- */
-#define SONY_BLOCK_NUMBER(m,s,f) (((m)*60L+(s))*75L+(f))
-#define SONY_BLOCK_NUMBER_MSF(x) (((x)[0]*60L+(x)[1])*75L+(x)[2])
-
-/*
- *  error return values from the doSonyCmd() routines
- */
-#define TIME_OUT			(-1)
-#define NO_CDROM			(-2)
-#define BAD_STATUS			(-3)
-#define CD_BUSY				(-4)
-#define NOT_DATA_CD			(-5)
-#define NO_ROOM				(-6)
-
-#define LOG_START_OFFSET        150     /* Offset of first logical sector */
-
-#define SONY_JIFFIES_TIMEOUT	(5*HZ)	/* Maximum time
-					   the drive will wait/try for an
-					   operation */
-#define SONY_READY_RETRIES      (50000)  /* How many times to retry a
-                                                  spin waiting for a register
-                                                  to come ready */
-#define SONY535_FAST_POLLS	(10000)   /* how many times recheck 
-                                                  status waiting for a data
-                                                  to become ready */
-
-typedef unsigned char Byte;
-
-/*
- * This is the complete status returned from the drive configuration request
- * command.
- */
-struct s535_sony_drive_config
-{
-   char vendor_id[8];
-   char product_id[16];
-   char product_rev_level[4];
-};
-
-/* The following is returned from the request sub-q data command */
-struct s535_sony_subcode
-{
-   unsigned char address        :4;
-   unsigned char control        :4;
-   unsigned char track_num;
-   unsigned char index_num;
-   unsigned char rel_msf[3];
-   unsigned char abs_msf[3];
-};
-
-struct s535_sony_disc_capacity
-{
-   Byte mFirstTrack, sFirstTrack, fFirstTrack;
-   Byte mLeadOut, sLeadOut, fLeadOut;
-};
-
-/*
- * The following is returned from the request TOC (Table Of Contents) command.
- * (last_track_num-first_track_num+1) values are valid in tracks.
- */
-struct s535_sony_toc
-{
-   unsigned char reserved0      :4;
-   unsigned char control0       :4;
-   unsigned char point0;
-   unsigned char first_track_num;
-   unsigned char reserved0a;
-   unsigned char reserved0b;
-   unsigned char reserved1      :4;
-   unsigned char control1       :4;
-   unsigned char point1;
-   unsigned char last_track_num;
-   unsigned char dummy1;
-   unsigned char dummy2;
-   unsigned char reserved2      :4;
-   unsigned char control2       :4;
-   unsigned char point2;
-   unsigned char lead_out_start_msf[3];
-   struct
-   {
-      unsigned char reserved    :4;
-      unsigned char control     :4;
-      unsigned char track;
-      unsigned char track_start_msf[3];
-   } tracks[100];
-
-   unsigned int lead_out_start_lba;
-};
-
-#endif /* SONYCD535_H */
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index ef683ebd367c..a31c6d2c061f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -815,7 +815,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390 && !SUPERH
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index e6c534e62846..df0ddf14b85c 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -462,9 +462,7 @@ static int __devinit agp_amdk7_probe(struct pci_dev *pdev,
 	 * erratum 46: Setup violation on AGP SBA pins - Disable side band addressing.
 	 * With this lot disabled, we should prevent lockups. */
 	if (agp_bridge->dev->device == PCI_DEVICE_ID_AMD_FE_GATE_700E) {
-		u8 revision=0;
-		pci_read_config_byte(pdev, PCI_REVISION_ID, &revision);
-		if (revision == 0x10 || revision == 0x11) {
+		if (pdev->revision == 0x10 || pdev->revision == 0x11) {
 			agp_bridge->flags = AGP_ERRATA_FASTWRITES;
 			agp_bridge->flags |= AGP_ERRATA_SBA;
 			agp_bridge->flags |= AGP_ERRATA_1X;
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 801abdd29066..d95662e96326 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -367,10 +367,8 @@ static __devinit int cache_nbs (struct pci_dev *pdev, u32 cap_ptr)
 static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge)
 {
 	char *revstring;
-	u8 rev_id;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-	switch (rev_id) {
+	switch (pdev->revision) {
 	case 0x01: revstring="A0"; break;
 	case 0x02: revstring="A1"; break;
 	case 0x11: revstring="B0"; break;
@@ -386,7 +384,7 @@ static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data
 	 * Work around errata.
 	 * Chips before B2 stepping incorrectly reporting v3.5
 	 */
-	if (rev_id < 0x13) {
+	if (pdev->revision < 0x13) {
 		printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
 		bridge->major_version = 3;
 		bridge->minor_version = 0;
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index ebdd6dd66edb..1b47c89a1b99 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -321,7 +321,7 @@ EXPORT_SYMBOL(agp_try_unsupported_boot);
 static int __init agp_init(void)
 {
 	if (!agp_off)
-		printk(KERN_INFO "Linux agpgart interface v%d.%d (c) Dave Jones\n",
+		printk(KERN_INFO "Linux agpgart interface v%d.%d\n",
 			AGPGART_VERSION_MAJOR, AGPGART_VERSION_MINOR);
 	return 0;
 }
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 8e222f2b80cc..b5df7e61aeb2 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2171,52 +2171,42 @@ static int create_files(struct bmc_device *bmc)
 	int err;
 
 	bmc->device_id_attr.attr.name = "device_id";
-	bmc->device_id_attr.attr.owner = THIS_MODULE;
 	bmc->device_id_attr.attr.mode = S_IRUGO;
 	bmc->device_id_attr.show = device_id_show;
 
 	bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs";
-	bmc->provides_dev_sdrs_attr.attr.owner = THIS_MODULE;
 	bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO;
 	bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show;
 
 	bmc->revision_attr.attr.name = "revision";
-	bmc->revision_attr.attr.owner = THIS_MODULE;
 	bmc->revision_attr.attr.mode = S_IRUGO;
 	bmc->revision_attr.show = revision_show;
 
 	bmc->firmware_rev_attr.attr.name = "firmware_revision";
-	bmc->firmware_rev_attr.attr.owner = THIS_MODULE;
 	bmc->firmware_rev_attr.attr.mode = S_IRUGO;
 	bmc->firmware_rev_attr.show = firmware_rev_show;
 
 	bmc->version_attr.attr.name = "ipmi_version";
-	bmc->version_attr.attr.owner = THIS_MODULE;
 	bmc->version_attr.attr.mode = S_IRUGO;
 	bmc->version_attr.show = ipmi_version_show;
 
 	bmc->add_dev_support_attr.attr.name = "additional_device_support";
-	bmc->add_dev_support_attr.attr.owner = THIS_MODULE;
 	bmc->add_dev_support_attr.attr.mode = S_IRUGO;
 	bmc->add_dev_support_attr.show = add_dev_support_show;
 
 	bmc->manufacturer_id_attr.attr.name = "manufacturer_id";
-	bmc->manufacturer_id_attr.attr.owner = THIS_MODULE;
 	bmc->manufacturer_id_attr.attr.mode = S_IRUGO;
 	bmc->manufacturer_id_attr.show = manufacturer_id_show;
 
 	bmc->product_id_attr.attr.name = "product_id";
-	bmc->product_id_attr.attr.owner = THIS_MODULE;
 	bmc->product_id_attr.attr.mode = S_IRUGO;
 	bmc->product_id_attr.show = product_id_show;
 
 	bmc->guid_attr.attr.name = "guid";
-	bmc->guid_attr.attr.owner = THIS_MODULE;
 	bmc->guid_attr.attr.mode = S_IRUGO;
 	bmc->guid_attr.show = guid_show;
 
 	bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision";
-	bmc->aux_firmware_rev_attr.attr.owner = THIS_MODULE;
 	bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO;
 	bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show;
 
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 1b094509b1d2..90965b4def5c 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1005,8 +1005,8 @@ static const unsigned short x86_keycodes[256] =
 	284,285,309,  0,312, 91,327,328,329,331,333,335,336,337,338,339,
 	367,288,302,304,350, 89,334,326,267,126,268,269,125,347,348,349,
 	360,261,262,263,268,376,100,101,321,316,373,286,289,102,351,355,
-	103,104,105,275,287,279,306,106,274,107,294,364,358,363,362,361,
-	291,108,381,281,290,272,292,305,280, 99,112,257,258,359,113,114,
+	103,104,105,275,287,279,258,106,274,107,294,364,358,363,362,361,
+	291,108,381,281,290,272,292,305,280, 99,112,257,306,359,113,114,
 	264,117,271,374,379,265,266, 93, 94, 95, 85,259,375,260, 90,116,
 	377,109,111,277,278,282,283,295,296,297,299,300,301,293,303,307,
 	308,310,313,314,315,317,318,319,320,357,322,323,324,325,276,330,
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index cc9a9d0df979..bbee97ff355f 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -24,7 +24,7 @@
 #include <linux/crash_dump.h>
 #include <linux/backing-dev.h>
 #include <linux/bootmem.h>
-#include <linux/pipe_fs_i.h>
+#include <linux/splice.h>
 #include <linux/pfn.h>
 
 #include <asm/uaccess.h>
@@ -75,6 +75,13 @@ static inline int uncached_access(struct file *file, unsigned long addr)
 	 * On ia64, we ignore O_SYNC because we cannot tolerate memory attribute aliases.
 	 */
 	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
+#elif defined(CONFIG_MIPS)
+	{
+		extern int __uncached_access(struct file *file,
+					     unsigned long addr);
+
+		return __uncached_access(file, addr);
+	}
 #else
 	/*
 	 * Accessing memory above the top the kernel knows about or through a file pointer
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 1da92a689ae4..85a23283dff5 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -2721,9 +2721,9 @@ static void __devexit sx_pci_remove(struct pci_dev *pdev)
    its because the standard requires it. So check for SUBVENDOR_ID. */
 static struct pci_device_id sx_pci_tbl[] = {
 	{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
-		.subvendor = 0x0200,.subdevice = PCI_ANY_ID },
+		.subvendor = PCI_ANY_ID, .subdevice = 0x0200 },
 	{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
-		.subvendor = 0x0300,.subdevice = PCI_ANY_ID },
+		.subvendor = PCI_ANY_ID, .subdevice = 0x0300 },
 	{ 0 }
 };
 
diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c
index 0cea8d4907df..e5ed09192be8 100644
--- a/drivers/char/vr41xx_giu.c
+++ b/drivers/char/vr41xx_giu.c
@@ -19,18 +19,17 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/platform_device.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
-#include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-#include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/vr41xx/giu.h>
 #include <asm/vr41xx/irq.h>
@@ -44,18 +43,6 @@ static int major;	/* default is dynamic major device number */
 module_param(major, int, 0);
 MODULE_PARM_DESC(major, "Major device number");
 
-#define GIU_TYPE1_START		0x0b000100UL
-#define GIU_TYPE1_SIZE		0x20UL
-
-#define GIU_TYPE2_START		0x0f000140UL
-#define GIU_TYPE2_SIZE		0x20UL
-
-#define GIU_TYPE3_START		0x0f000140UL
-#define GIU_TYPE3_SIZE		0x28UL
-
-#define GIU_PULLUPDOWN_START	0x0b0002e0UL
-#define GIU_PULLUPDOWN_SIZE	0x04UL
-
 #define GIUIOSELL	0x00
 #define GIUIOSELH	0x02
 #define GIUPIODL	0x04
@@ -89,8 +76,6 @@ MODULE_PARM_DESC(major, "Major device number");
 #define GPIO_HAS_INTERRUPT_EDGE_SELECT	0x0100
 
 static spinlock_t giu_lock;
-static struct resource *giu_resource1;
-static struct resource *giu_resource2;
 static unsigned long giu_flags;
 static unsigned int giu_nr_pins;
 
@@ -234,7 +219,7 @@ void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_
 				giu_set(GIUINTHTSELL, mask);
 			else
 				giu_clear(GIUINTHTSELL, mask);
-			if (current_cpu_data.cputype == CPU_VR4133) {
+			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
 				switch (trigger) {
 				case IRQ_TRIGGER_EDGE_FALLING:
 					giu_set(GIUFEDGEINHL, mask);
@@ -269,7 +254,7 @@ void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_
 				giu_set(GIUINTHTSELH, mask);
 			else
 				giu_clear(GIUINTHTSELH, mask);
-			if (current_cpu_data.cputype == CPU_VR4133) {
+			if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
 				switch (trigger) {
 				case IRQ_TRIGGER_EDGE_FALLING:
 					giu_set(GIUFEDGEINHH, mask);
@@ -298,7 +283,6 @@ void vr41xx_set_irq_trigger(unsigned int pin, irq_trigger_t trigger, irq_signal_
 		giu_write(GIUINTSTATH, mask);
 	}
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
 
 void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
@@ -321,7 +305,6 @@ void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
 		giu_write(GIUINTSTATH, mask);
 	}
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
 
 gpio_data_t vr41xx_gpio_get_pin(unsigned int pin)
@@ -350,7 +333,6 @@ gpio_data_t vr41xx_gpio_get_pin(unsigned int pin)
 
 	return GPIO_DATA_LOW;
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin);
 
 int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data)
@@ -388,7 +370,6 @@ int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data)
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin);
 
 int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
@@ -438,7 +419,6 @@ int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction);
 
 int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
@@ -477,7 +457,6 @@ int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
 
 static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
@@ -596,61 +575,40 @@ static const struct file_operations gpio_fops = {
 
 static int __devinit giu_probe(struct platform_device *dev)
 {
-	unsigned long start, size, flags = 0;
-	unsigned int nr_pins = 0, trigger, i, pin;
-	struct resource *res1, *res2 = NULL;
-	void *base;
+	struct resource *res;
+	unsigned int trigger, i, pin;
 	struct irq_chip *chip;
-	int retval;
-
-	switch (current_cpu_data.cputype) {
-	case CPU_VR4111:
-	case CPU_VR4121:
-		start = GIU_TYPE1_START;
-		size = GIU_TYPE1_SIZE;
-		flags = GPIO_HAS_PULLUPDOWN_IO;
-		nr_pins = 50;
+	int irq, retval;
+
+	switch (dev->id) {
+	case GPIO_50PINS_PULLUPDOWN:
+		giu_flags = GPIO_HAS_PULLUPDOWN_IO;
+		giu_nr_pins = 50;
 		break;
-	case CPU_VR4122:
-	case CPU_VR4131:
-		start = GIU_TYPE2_START;
-		size = GIU_TYPE2_SIZE;
-		nr_pins = 36;
+	case GPIO_36PINS:
+		giu_nr_pins = 36;
 		break;
-	case CPU_VR4133:
-		start = GIU_TYPE3_START;
-		size = GIU_TYPE3_SIZE;
-		flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
-		nr_pins = 48;
+	case GPIO_48PINS_EDGE_SELECT:
+		giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
+		giu_nr_pins = 48;
 		break;
 	default:
+		printk(KERN_ERR "GIU: unknown ID %d\n", dev->id);
 		return -ENODEV;
 	}
 
-	res1 = request_mem_region(start, size, "GIU");
-	if (res1 == NULL)
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
 		return -EBUSY;
 
-	base = ioremap(start, size);
-	if (base == NULL) {
-		release_resource(res1);
+	giu_base = ioremap(res->start, res->end - res->start + 1);
+	if (!giu_base)
 		return -ENOMEM;
-	}
-
-	if (flags & GPIO_HAS_PULLUPDOWN_IO) {
-		res2 = request_mem_region(GIU_PULLUPDOWN_START, GIU_PULLUPDOWN_SIZE, "GIU");
-		if (res2 == NULL) {
-			iounmap(base);
-			release_resource(res1);
-			return -EBUSY;
-		}
-	}
 
 	retval = register_chrdev(major, "GIU", &gpio_fops);
 	if (retval < 0) {
-		iounmap(base);
-		release_resource(res1);
-		release_resource(res2);
+		iounmap(giu_base);
+		giu_base = NULL;
 		return retval;
 	}
 
@@ -660,11 +618,6 @@ static int __devinit giu_probe(struct platform_device *dev)
 	}
 
 	spin_lock_init(&giu_lock);
-	giu_base = base;
-	giu_resource1 = res1;
-	giu_resource2 = res2;
-	giu_flags = flags;
-	giu_nr_pins = nr_pins;
 
 	giu_write(GIUINTENL, 0);
 	giu_write(GIUINTENH, 0);
@@ -685,22 +638,23 @@ static int __devinit giu_probe(struct platform_device *dev)
 
 	}
 
-	return cascade_irq(GIUINT_IRQ, giu_get_irq);
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0 || irq >= NR_IRQS)
+		return -EBUSY;
+
+	return cascade_irq(irq, giu_get_irq);
 }
 
 static int __devexit giu_remove(struct platform_device *dev)
 {
-	iounmap(giu_base);
-
-	release_resource(giu_resource1);
-	if (giu_flags & GPIO_HAS_PULLUPDOWN_IO)
-		release_resource(giu_resource2);
+	if (giu_base) {
+		iounmap(giu_base);
+		giu_base = NULL;
+	}
 
 	return 0;
 }
 
-static struct platform_device *giu_platform_device;
-
 static struct platform_driver giu_device_driver = {
 	.probe		= giu_probe,
 	.remove		= __devexit_p(giu_remove),
@@ -712,30 +666,12 @@ static struct platform_driver giu_device_driver = {
 
 static int __init vr41xx_giu_init(void)
 {
-	int retval;
-
-	giu_platform_device = platform_device_alloc("GIU", -1);
-	if (!giu_platform_device)
-		return -ENOMEM;
-
-	retval = platform_device_add(giu_platform_device);
-	if (retval < 0) {
-		platform_device_put(giu_platform_device);
-		return retval;
-	}
-
-	retval = platform_driver_register(&giu_device_driver);
-	if (retval < 0)
-		platform_device_unregister(giu_platform_device);
-
-	return retval;
+	return platform_driver_register(&giu_device_driver);
 }
 
 static void __exit vr41xx_giu_exit(void)
 {
 	platform_driver_unregister(&giu_device_driver);
-
-	platform_device_unregister(giu_platform_device);
 }
 
 module_init(vr41xx_giu_init);
diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 5cfcff532545..e783dbf0f162 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -105,14 +105,11 @@ static inline void acpi_pm_need_workaround(void)
  */
 static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev)
 {
-	u8 rev;
-
 	if (acpi_pm_good)
 		return;
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
 	/* the bug has been fixed in PIIX4M */
-	if (rev < 3) {
+	if (dev->revision < 3) {
 		printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
 		       " Due to workarounds for a bug,\n"
 		       "* this clock source is slow. Consider trying"
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index eb37fba9b7ef..0db9e1bda322 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -826,13 +826,21 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	/* set up files for this cpu device */
 	drv_attr = cpufreq_driver->attr;
 	while ((drv_attr) && (*drv_attr)) {
-		sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
+		ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
+		if (ret)
+			goto err_out_driver_exit;
 		drv_attr++;
 	}
-	if (cpufreq_driver->get)
-		sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
-	if (cpufreq_driver->target)
-		sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
+	if (cpufreq_driver->get){
+		ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+		if (ret)
+			goto err_out_driver_exit;
+	}
+	if (cpufreq_driver->target){
+		ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
+		if (ret)
+			goto err_out_driver_exit;
+	}
 
 	spin_lock_irqsave(&cpufreq_driver_lock, flags);
 	for_each_cpu_mask(j, policy->cpus) {
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 8532bb79e5fc..e794527e4925 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -96,15 +96,25 @@ static struct dbs_tuners {
 
 static inline cputime64_t get_cpu_idle_time(unsigned int cpu)
 {
-	cputime64_t retval;
+	cputime64_t idle_time;
+	cputime64_t cur_jiffies;
+	cputime64_t busy_time;
 
-	retval = cputime64_add(kstat_cpu(cpu).cpustat.idle,
-			kstat_cpu(cpu).cpustat.iowait);
+	cur_jiffies = jiffies64_to_cputime64(get_jiffies_64());
+	busy_time = cputime64_add(kstat_cpu(cpu).cpustat.user,
+			kstat_cpu(cpu).cpustat.system);
 
-	if (dbs_tuners_ins.ignore_nice)
-		retval = cputime64_add(retval, kstat_cpu(cpu).cpustat.nice);
+	busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.irq);
+	busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.softirq);
+	busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.steal);
 
-	return retval;
+	if (!dbs_tuners_ins.ignore_nice) {
+		busy_time = cputime64_add(busy_time,
+				kstat_cpu(cpu).cpustat.nice);
+	}
+
+	idle_time = cputime64_sub(cur_jiffies, busy_time);
+	return idle_time;
 }
 
 /*
@@ -325,7 +335,7 @@ static struct attribute_group dbs_attr_group = {
 static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
 {
 	unsigned int idle_ticks, total_ticks;
-	unsigned int load;
+	unsigned int load = 0;
 	cputime64_t cur_jiffies;
 
 	struct cpufreq_policy *policy;
@@ -339,7 +349,8 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
 	cur_jiffies = jiffies64_to_cputime64(get_jiffies_64());
 	total_ticks = (unsigned int) cputime64_sub(cur_jiffies,
 			this_dbs_info->prev_cpu_wall);
-	this_dbs_info->prev_cpu_wall = cur_jiffies;
+	this_dbs_info->prev_cpu_wall = get_jiffies_64();
+
 	if (!total_ticks)
 		return;
 	/*
@@ -370,7 +381,8 @@ static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
 		if (tmp_idle_ticks < idle_ticks)
 			idle_ticks = tmp_idle_ticks;
 	}
-	load = (100 * (total_ticks - idle_ticks)) / total_ticks;
+	if (likely(total_ticks > idle_ticks))
+		load = (100 * (total_ticks - idle_ticks)) / total_ticks;
 
 	/* Check for frequency increase */
 	if (load > dbs_tuners_ins.up_threshold) {
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index d2f0cbd8b8f3..917b9bab9ccb 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -25,8 +25,7 @@ static spinlock_t cpufreq_stats_lock;
 
 #define CPUFREQ_STATDEVICE_ATTR(_name,_mode,_show) \
 static struct freq_attr _attr_##_name = {\
-	.attr = {.name = __stringify(_name), .owner = THIS_MODULE, \
-		.mode = _mode, }, \
+	.attr = {.name = __stringify(_name), .mode = _mode, }, \
 	.show = _show,\
 };
 
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index 860345c7799a..51bedab6c808 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -37,6 +37,7 @@ static unsigned int	cpu_set_freq[NR_CPUS]; /* CPU freq desired by userspace */
 static unsigned int	cpu_is_managed[NR_CPUS];
 
 static DEFINE_MUTEX	(userspace_mutex);
+static int cpus_using_userspace_governor;
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
 
@@ -47,7 +48,11 @@ userspace_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 {
         struct cpufreq_freqs *freq = data;
 
-	dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n", freq->cpu, freq->new);
+	if (!cpu_is_managed[freq->cpu])
+		return 0;
+
+	dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n",
+			freq->cpu, freq->new);
 	cpu_cur_freq[freq->cpu] = freq->new;
 
         return 0;
@@ -120,7 +125,7 @@ store_speed (struct cpufreq_policy *policy, const char *buf, size_t count)
 
 static struct freq_attr freq_attr_scaling_setspeed =
 {
-	.attr = { .name = "scaling_setspeed", .mode = 0644, .owner = THIS_MODULE },
+	.attr = { .name = "scaling_setspeed", .mode = 0644 },
 	.show = show_speed,
 	.store = store_speed,
 };
@@ -142,6 +147,13 @@ static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
 		if (rc)
 			goto start_out;
 
+		if (cpus_using_userspace_governor == 0) {
+			cpufreq_register_notifier(
+					&userspace_cpufreq_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+		}
+		cpus_using_userspace_governor++;
+
 		cpu_is_managed[cpu] = 1;
 		cpu_min_freq[cpu] = policy->min;
 		cpu_max_freq[cpu] = policy->max;
@@ -153,6 +165,13 @@ start_out:
 		break;
 	case CPUFREQ_GOV_STOP:
 		mutex_lock(&userspace_mutex);
+		cpus_using_userspace_governor--;
+		if (cpus_using_userspace_governor == 0) {
+			cpufreq_unregister_notifier(
+					&userspace_cpufreq_notifier_block,
+					CPUFREQ_TRANSITION_NOTIFIER);
+		}
+
 		cpu_is_managed[cpu] = 0;
 		cpu_min_freq[cpu] = 0;
 		cpu_max_freq[cpu] = 0;
@@ -198,7 +217,6 @@ EXPORT_SYMBOL(cpufreq_gov_userspace);
 
 static int __init cpufreq_gov_userspace_init(void)
 {
-	cpufreq_register_notifier(&userspace_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
 	return cpufreq_register_governor(&cpufreq_gov_userspace);
 }
 
@@ -206,7 +224,6 @@ static int __init cpufreq_gov_userspace_init(void)
 static void __exit cpufreq_gov_userspace_exit(void)
 {
 	cpufreq_unregister_governor(&cpufreq_gov_userspace);
-        cpufreq_unregister_notifier(&userspace_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
 }
 
 
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index e7490925fdcf..5409f3afb3f8 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -199,7 +199,6 @@ static ssize_t show_available_freqs (struct cpufreq_policy *policy, char *buf)
 struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
 	.attr = { .name = "scaling_available_frequencies",
 		  .mode = 0444,
-		  .owner=THIS_MODULE
 		},
 	.show = show_available_freqs,
 };
diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c
index 9eb1edacd825..0aeab3218bb6 100644
--- a/drivers/firewire/fw-card.c
+++ b/drivers/firewire/fw-card.c
@@ -336,8 +336,11 @@ fw_card_bm_work(struct work_struct *work)
 	}
 
  pick_me:
-	/* Now figure out what gap count to set. */
-	if (card->topology_type == FW_TOPOLOGY_A &&
+	/*
+	 * Pick a gap count from 1394a table E-1.  The table doesn't cover
+	 * the typically much larger 1394b beta repeater delays though.
+	 */
+	if (!card->beta_repeaters_present &&
 	    card->root_node->max_hops < ARRAY_SIZE(gap_count_table))
 		gap_count = gap_count_table[card->root_node->max_hops];
 	else
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index dbb76427d529..75388641a7d3 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -397,7 +397,7 @@ static int ioctl_send_request(struct client *client, void *buffer)
 			request->tcode & 0x1f,
 			device->node->node_id,
 			request->generation,
-			device->node->max_speed,
+			device->max_speed,
 			request->offset,
 			response->response.data, request->length,
 			complete_transaction, response);
diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c
index c1ce465d9710..2b6586341635 100644
--- a/drivers/firewire/fw-device.c
+++ b/drivers/firewire/fw-device.c
@@ -401,8 +401,7 @@ static int read_rom(struct fw_device *device, int index, u32 * data)
 
 	offset = 0xfffff0000400ULL + index * 4;
 	fw_send_request(device->card, &t, TCODE_READ_QUADLET_REQUEST,
-			device->node_id,
-			device->generation, SCODE_100,
+			device->node_id, device->generation, device->max_speed,
 			offset, NULL, 4, complete_transaction, &callback_data);
 
 	wait_for_completion(&callback_data.done);
@@ -418,6 +417,8 @@ static int read_bus_info_block(struct fw_device *device)
 	u32 stack[16], sp, key;
 	int i, end, length;
 
+	device->max_speed = SCODE_100;
+
 	/* First read the bus info block. */
 	for (i = 0; i < 5; i++) {
 		if (read_rom(device, i, &rom[i]) != RCODE_COMPLETE)
@@ -434,6 +435,33 @@ static int read_bus_info_block(struct fw_device *device)
 			return -1;
 	}
 
+	device->max_speed = device->node->max_speed;
+
+	/*
+	 * Determine the speed of
+	 *   - devices with link speed less than PHY speed,
+	 *   - devices with 1394b PHY (unless only connected to 1394a PHYs),
+	 *   - all devices if there are 1394b repeaters.
+	 * Note, we cannot use the bus info block's link_spd as starting point
+	 * because some buggy firmwares set it lower than necessary and because
+	 * 1394-1995 nodes do not have the field.
+	 */
+	if ((rom[2] & 0x7) < device->max_speed ||
+	    device->max_speed == SCODE_BETA ||
+	    device->card->beta_repeaters_present) {
+		u32 dummy;
+
+		/* for S1600 and S3200 */
+		if (device->max_speed == SCODE_BETA)
+			device->max_speed = device->card->link_speed;
+
+		while (device->max_speed > SCODE_100) {
+			if (read_rom(device, 0, &dummy) == RCODE_COMPLETE)
+				break;
+			device->max_speed--;
+		}
+	}
+
 	/*
 	 * Now parse the config rom.  The config rom is a recursive
 	 * directory structure so we parse it using a stack of
@@ -680,8 +708,10 @@ static void fw_device_init(struct work_struct *work)
 		    FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN)
 		fw_device_shutdown(&device->work.work);
 	else
-		fw_notify("created new fw device %s (%d config rom retries)\n",
-			  device->device.bus_id, device->config_rom_retries);
+		fw_notify("created new fw device %s "
+			  "(%d config rom retries, S%d00)\n",
+			  device->device.bus_id, device->config_rom_retries,
+			  1 << device->max_speed);
 
 	/*
 	 * Reschedule the IRM work if we just finished reading the
diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h
index af1723eae4ba..d13e6a69707f 100644
--- a/drivers/firewire/fw-device.h
+++ b/drivers/firewire/fw-device.h
@@ -40,6 +40,7 @@ struct fw_device {
 	struct fw_node *node;
 	int node_id;
 	int generation;
+	unsigned max_speed;
 	struct fw_card *card;
 	struct device device;
 	struct list_head link;
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 96c8ac5b86cc..41476abc0693 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -1934,12 +1934,12 @@ static int pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	free_irq(pdev->irq, ohci);
 	err = pci_save_state(pdev);
 	if (err) {
-		fw_error("pci_save_state failed with %d", err);
+		fw_error("pci_save_state failed\n");
 		return err;
 	}
 	err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
 	if (err) {
-		fw_error("pci_set_power_state failed with %d", err);
+		fw_error("pci_set_power_state failed\n");
 		return err;
 	}
 
@@ -1955,7 +1955,7 @@ static int pci_resume(struct pci_dev *pdev)
 	pci_restore_state(pdev);
 	err = pci_enable_device(pdev);
 	if (err) {
-		fw_error("pci_enable_device failed with %d", err);
+		fw_error("pci_enable_device failed\n");
 		return err;
 	}
 
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index a98d3915e26f..7c53be0387fb 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -30,10 +30,13 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/mod_devicetable.h>
 #include <linux/device.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-mapping.h>
+#include <linux/blkdev.h>
+#include <linux/string.h>
 #include <linux/timer.h>
 
 #include <scsi/scsi.h>
@@ -46,6 +49,18 @@
 #include "fw-topology.h"
 #include "fw-device.h"
 
+/*
+ * So far only bridges from Oxford Semiconductor are known to support
+ * concurrent logins. Depending on firmware, four or two concurrent logins
+ * are possible on OXFW911 and newer Oxsemi bridges.
+ *
+ * Concurrent logins are useful together with cluster filesystems.
+ */
+static int sbp2_param_exclusive_login = 1;
+module_param_named(exclusive_login, sbp2_param_exclusive_login, bool, 0644);
+MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
+		 "(default = Y, use N for concurrent initiators)");
+
 /* I don't know why the SCSI stack doesn't define something like this... */
 typedef void (*scsi_done_fn_t)(struct scsi_cmnd *);
 
@@ -154,7 +169,7 @@ struct sbp2_orb {
 #define MANAGEMENT_ORB_LUN(v)			((v))
 #define MANAGEMENT_ORB_FUNCTION(v)		((v) << 16)
 #define MANAGEMENT_ORB_RECONNECT(v)		((v) << 20)
-#define MANAGEMENT_ORB_EXCLUSIVE		((1) << 28)
+#define MANAGEMENT_ORB_EXCLUSIVE(v)		((v) ? 1 << 28 : 0)
 #define MANAGEMENT_ORB_REQUEST_FORMAT(v)	((v) << 29)
 #define MANAGEMENT_ORB_NOTIFY			((1) << 31)
 
@@ -205,9 +220,8 @@ struct sbp2_command_orb {
 	scsi_done_fn_t done;
 	struct fw_unit *unit;
 
-	struct sbp2_pointer page_table[SG_ALL];
+	struct sbp2_pointer page_table[SG_ALL] __attribute__((aligned(8)));
 	dma_addr_t page_table_bus;
-	dma_addr_t request_buffer_bus;
 };
 
 /*
@@ -347,8 +361,7 @@ sbp2_send_orb(struct sbp2_orb *orb, struct fw_unit *unit,
 	spin_unlock_irqrestore(&device->card->lock, flags);
 
 	fw_send_request(device->card, &orb->t, TCODE_WRITE_BLOCK_REQUEST,
-			node_id, generation,
-			device->node->max_speed, offset,
+			node_id, generation, device->max_speed, offset,
 			&orb->pointer, sizeof(orb->pointer),
 			complete_transaction, orb);
 }
@@ -383,7 +396,7 @@ static void
 complete_management_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
 {
 	struct sbp2_management_orb *orb =
-	    (struct sbp2_management_orb *)base_orb;
+		container_of(base_orb, struct sbp2_management_orb, base);
 
 	if (status)
 		memcpy(&orb->status, status, sizeof(*status));
@@ -403,21 +416,11 @@ sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
 	if (orb == NULL)
 		return -ENOMEM;
 
-	/*
-	 * The sbp2 device is going to send a block read request to
-	 * read out the request from host memory, so map it for dma.
-	 */
-	orb->base.request_bus =
-		dma_map_single(device->card->device, &orb->request,
-			       sizeof(orb->request), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->base.request_bus))
-		goto out;
-
 	orb->response_bus =
 		dma_map_single(device->card->device, &orb->response,
 			       sizeof(orb->response), DMA_FROM_DEVICE);
 	if (dma_mapping_error(orb->response_bus))
-		goto out;
+		goto fail_mapping_response;
 
 	orb->request.response.high    = 0;
 	orb->request.response.low     = orb->response_bus;
@@ -432,14 +435,9 @@ sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
 	orb->request.status_fifo.high = sd->address_handler.offset >> 32;
 	orb->request.status_fifo.low  = sd->address_handler.offset;
 
-	/*
-	 * FIXME: Yeah, ok this isn't elegant, we hardwire exclusive
-	 * login and 1 second reconnect time.  The reconnect setting
-	 * is probably fine, but the exclusive login should be an option.
-	 */
 	if (function == SBP2_LOGIN_REQUEST) {
 		orb->request.misc |=
-			MANAGEMENT_ORB_EXCLUSIVE |
+			MANAGEMENT_ORB_EXCLUSIVE(sbp2_param_exclusive_login) |
 			MANAGEMENT_ORB_RECONNECT(0);
 	}
 
@@ -448,6 +446,12 @@ sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
 	init_completion(&orb->done);
 	orb->base.callback = complete_management_orb;
 
+	orb->base.request_bus =
+		dma_map_single(device->card->device, &orb->request,
+			       sizeof(orb->request), DMA_TO_DEVICE);
+	if (dma_mapping_error(orb->base.request_bus))
+		goto fail_mapping_request;
+
 	sbp2_send_orb(&orb->base, unit,
 		      node_id, generation, sd->management_agent_address);
 
@@ -479,9 +483,10 @@ sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
  out:
 	dma_unmap_single(device->card->device, orb->base.request_bus,
 			 sizeof(orb->request), DMA_TO_DEVICE);
+ fail_mapping_request:
 	dma_unmap_single(device->card->device, orb->response_bus,
 			 sizeof(orb->response), DMA_FROM_DEVICE);
-
+ fail_mapping_response:
 	if (response)
 		fw_memcpy_from_be32(response,
 				    orb->response, sizeof(orb->response));
@@ -511,7 +516,7 @@ static int sbp2_agent_reset(struct fw_unit *unit)
 		return -ENOMEM;
 
 	fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
-			sd->node_id, sd->generation, SCODE_400,
+			sd->node_id, sd->generation, device->max_speed,
 			sd->command_block_agent_address + SBP2_AGENT_RESET,
 			&zero, sizeof(zero), complete_agent_reset_write, t);
 
@@ -521,17 +526,15 @@ static int sbp2_agent_reset(struct fw_unit *unit)
 static void sbp2_reconnect(struct work_struct *work);
 static struct scsi_host_template scsi_driver_template;
 
-static void
-release_sbp2_device(struct kref *kref)
+static void release_sbp2_device(struct kref *kref)
 {
 	struct sbp2_device *sd = container_of(kref, struct sbp2_device, kref);
 	struct Scsi_Host *host =
 		container_of((void *)sd, struct Scsi_Host, hostdata[0]);
 
+	scsi_remove_host(host);
 	sbp2_send_management_orb(sd->unit, sd->node_id, sd->generation,
 				 SBP2_LOGOUT_REQUEST, sd->login_id, NULL);
-
-	scsi_remove_host(host);
 	fw_core_remove_address_handler(&sd->address_handler);
 	fw_notify("removed sbp2 unit %s\n", sd->unit->device.bus_id);
 	put_device(&sd->unit->device);
@@ -833,7 +836,8 @@ sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
 static void
 complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
 {
-	struct sbp2_command_orb *orb = (struct sbp2_command_orb *)base_orb;
+	struct sbp2_command_orb *orb =
+		container_of(base_orb, struct sbp2_command_orb, base);
 	struct fw_unit *unit = orb->unit;
 	struct fw_device *device = fw_device(unit->device.parent);
 	struct scatterlist *sg;
@@ -880,12 +884,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
 
 	if (orb->page_table_bus != 0)
 		dma_unmap_single(device->card->device, orb->page_table_bus,
-				 sizeof(orb->page_table_bus), DMA_TO_DEVICE);
-
-	if (orb->request_buffer_bus != 0)
-		dma_unmap_single(device->card->device, orb->request_buffer_bus,
-				 sizeof(orb->request_buffer_bus),
-				 DMA_FROM_DEVICE);
+				 sizeof(orb->page_table), DMA_TO_DEVICE);
 
 	orb->cmd->result = result;
 	orb->done(orb->cmd);
@@ -900,7 +899,6 @@ static int sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
 	struct fw_device *device = fw_device(unit->device.parent);
 	struct scatterlist *sg;
 	int sg_len, l, i, j, count;
-	size_t size;
 	dma_addr_t sg_addr;
 
 	sg = (struct scatterlist *)orb->cmd->request_buffer;
@@ -935,6 +933,11 @@ static int sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
 		sg_len = sg_dma_len(sg + i);
 		sg_addr = sg_dma_address(sg + i);
 		while (sg_len) {
+			/* FIXME: This won't get us out of the pinch. */
+			if (unlikely(j >= ARRAY_SIZE(orb->page_table))) {
+				fw_error("page table overflow\n");
+				goto fail_page_table;
+			}
 			l = min(sg_len, SBP2_MAX_SG_ELEMENT_LENGTH);
 			orb->page_table[j].low = sg_addr;
 			orb->page_table[j].high = (l << 16);
@@ -944,7 +947,13 @@ static int sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
 		}
 	}
 
-	size = sizeof(orb->page_table[0]) * j;
+	fw_memcpy_to_be32(orb->page_table, orb->page_table,
+			  sizeof(orb->page_table[0]) * j);
+	orb->page_table_bus =
+		dma_map_single(device->card->device, orb->page_table,
+			       sizeof(orb->page_table), DMA_TO_DEVICE);
+	if (dma_mapping_error(orb->page_table_bus))
+		goto fail_page_table;
 
 	/*
 	 * The data_descriptor pointer is the one case where we need
@@ -953,20 +962,12 @@ static int sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
 	 * initiator (i.e. us), but data_descriptor can refer to data
 	 * on other nodes so we need to put our ID in descriptor.high.
 	 */
-
-	orb->page_table_bus =
-		dma_map_single(device->card->device, orb->page_table,
-			       size, DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->page_table_bus))
-		goto fail_page_table;
 	orb->request.data_descriptor.high = sd->address_high;
 	orb->request.data_descriptor.low  = orb->page_table_bus;
 	orb->request.misc |=
 		COMMAND_ORB_PAGE_TABLE_PRESENT |
 		COMMAND_ORB_DATA_SIZE(j);
 
-	fw_memcpy_to_be32(orb->page_table, orb->page_table, size);
-
 	return 0;
 
  fail_page_table:
@@ -991,7 +992,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	 * transfer direction not handled.
 	 */
 	if (cmd->sc_data_direction == DMA_BIDIRECTIONAL) {
-		fw_error("Cannot handle DMA_BIDIRECTIONAL - rejecting command");
+		fw_error("Can't handle DMA_BIDIRECTIONAL, rejecting command\n");
 		cmd->result = DID_ERROR << 16;
 		done(cmd);
 		return 0;
@@ -1005,11 +1006,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 
 	/* Initialize rcode to something not RCODE_COMPLETE. */
 	orb->base.rcode = -1;
-	orb->base.request_bus =
-		dma_map_single(device->card->device, &orb->request,
-			       sizeof(orb->request), DMA_TO_DEVICE);
-	if (dma_mapping_error(orb->base.request_bus))
-		goto fail_mapping;
 
 	orb->unit = unit;
 	orb->done = done;
@@ -1024,8 +1020,8 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	 * if we set this to max_speed + 7, we get the right value.
 	 */
 	orb->request.misc =
-		COMMAND_ORB_MAX_PAYLOAD(device->node->max_speed + 7) |
-		COMMAND_ORB_SPEED(device->node->max_speed) |
+		COMMAND_ORB_MAX_PAYLOAD(device->max_speed + 7) |
+		COMMAND_ORB_SPEED(device->max_speed) |
 		COMMAND_ORB_NOTIFY;
 
 	if (cmd->sc_data_direction == DMA_FROM_DEVICE)
@@ -1036,7 +1032,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 			COMMAND_ORB_DIRECTION(SBP2_DIRECTION_TO_MEDIA);
 
 	if (cmd->use_sg && sbp2_command_orb_map_scatterlist(orb) < 0)
-		goto fail_map_payload;
+		goto fail_mapping;
 
 	fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
 
@@ -1045,15 +1041,17 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
 
 	orb->base.callback = complete_command_orb;
+	orb->base.request_bus =
+		dma_map_single(device->card->device, &orb->request,
+			       sizeof(orb->request), DMA_TO_DEVICE);
+	if (dma_mapping_error(orb->base.request_bus))
+		goto fail_mapping;
 
 	sbp2_send_orb(&orb->base, unit, sd->node_id, sd->generation,
 		      sd->command_block_agent_address + SBP2_ORB_POINTER);
 
 	return 0;
 
- fail_map_payload:
-	dma_unmap_single(device->card->device, orb->base.request_bus,
-			 sizeof(orb->request), DMA_TO_DEVICE);
  fail_mapping:
 	kfree(orb);
  fail_alloc:
@@ -1087,7 +1085,8 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev)
 		fw_notify("setting fix_capacity for %s\n", unit->device.bus_id);
 		sdev->fix_capacity = 1;
 	}
-
+	if (sd->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
+		blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512);
 	return 0;
 }
 
diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c
index 7aebb8ae0efa..39e5cd12aa52 100644
--- a/drivers/firewire/fw-topology.c
+++ b/drivers/firewire/fw-topology.c
@@ -135,17 +135,17 @@ static void update_hop_count(struct fw_node *node)
 	int i;
 
 	for (i = 0; i < node->port_count; i++) {
-		if (node->ports[i].node == NULL)
+		if (node->ports[i] == NULL)
 			continue;
 
-		if (node->ports[i].node->max_hops > max_child_hops)
-			max_child_hops = node->ports[i].node->max_hops;
+		if (node->ports[i]->max_hops > max_child_hops)
+			max_child_hops = node->ports[i]->max_hops;
 
-		if (node->ports[i].node->max_depth > depths[0]) {
+		if (node->ports[i]->max_depth > depths[0]) {
 			depths[1] = depths[0];
-			depths[0] = node->ports[i].node->max_depth;
-		} else if (node->ports[i].node->max_depth > depths[1])
-			depths[1] = node->ports[i].node->max_depth;
+			depths[0] = node->ports[i]->max_depth;
+		} else if (node->ports[i]->max_depth > depths[1])
+			depths[1] = node->ports[i]->max_depth;
 	}
 
 	node->max_depth = depths[0] + 1;
@@ -172,7 +172,8 @@ static struct fw_node *build_tree(struct fw_card *card,
 	struct list_head stack, *h;
 	u32 *next_sid, *end, q;
 	int i, port_count, child_port_count, phy_id, parent_count, stack_depth;
-	int gap_count, topology_type;
+	int gap_count;
+	bool beta_repeaters_present;
 
 	local_node = NULL;
 	node = NULL;
@@ -182,7 +183,7 @@ static struct fw_node *build_tree(struct fw_card *card,
 	phy_id = 0;
 	irm_node = NULL;
 	gap_count = SELF_ID_GAP_COUNT(*sid);
-	topology_type = 0;
+	beta_repeaters_present = false;
 
 	while (sid < end) {
 		next_sid = count_ports(sid, &port_count, &child_port_count);
@@ -214,7 +215,7 @@ static struct fw_node *build_tree(struct fw_card *card,
 
 		node = fw_node_create(q, port_count, card->color);
 		if (node == NULL) {
-			fw_error("Out of memory while building topology.");
+			fw_error("Out of memory while building topology.\n");
 			return NULL;
 		}
 
@@ -224,11 +225,6 @@ static struct fw_node *build_tree(struct fw_card *card,
 		if (SELF_ID_CONTENDER(q))
 			irm_node = node;
 
-		if (node->phy_speed == SCODE_BETA)
-			topology_type |= FW_TOPOLOGY_B;
-		else
-			topology_type |= FW_TOPOLOGY_A;
-
 		parent_count = 0;
 
 		for (i = 0; i < port_count; i++) {
@@ -249,12 +245,12 @@ static struct fw_node *build_tree(struct fw_card *card,
 				break;
 
 			case SELFID_PORT_CHILD:
-				node->ports[i].node = child;
+				node->ports[i] = child;
 				/*
 				 * Fix up parent reference for this
 				 * child node.
 				 */
-				child->ports[child->color].node = node;
+				child->ports[child->color] = node;
 				child->color = card->color;
 				child = fw_node(child->link.next);
 				break;
@@ -278,6 +274,10 @@ static struct fw_node *build_tree(struct fw_card *card,
 		list_add_tail(&node->link, &stack);
 		stack_depth += 1 - child_port_count;
 
+		if (node->phy_speed == SCODE_BETA &&
+		    parent_count + child_port_count > 1)
+			beta_repeaters_present = true;
+
 		/*
 		 * If all PHYs does not report the same gap count
 		 * setting, we fall back to 63 which will force a gap
@@ -295,7 +295,7 @@ static struct fw_node *build_tree(struct fw_card *card,
 	card->root_node = node;
 	card->irm_node = irm_node;
 	card->gap_count = gap_count;
-	card->topology_type = topology_type;
+	card->beta_repeaters_present = beta_repeaters_present;
 
 	return local_node;
 }
@@ -321,7 +321,7 @@ for_each_fw_node(struct fw_card *card, struct fw_node *root,
 		node->color = card->color;
 
 		for (i = 0; i < node->port_count; i++) {
-			child = node->ports[i].node;
+			child = node->ports[i];
 			if (!child)
 				continue;
 			if (child->color == card->color)
@@ -382,11 +382,11 @@ static void move_tree(struct fw_node *node0, struct fw_node *node1, int port)
 	struct fw_node *tree;
 	int i;
 
-	tree = node1->ports[port].node;
-	node0->ports[port].node = tree;
+	tree = node1->ports[port];
+	node0->ports[port] = tree;
 	for (i = 0; i < tree->port_count; i++) {
-		if (tree->ports[i].node == node1) {
-			tree->ports[i].node = node0;
+		if (tree->ports[i] == node1) {
+			tree->ports[i] = node0;
 			break;
 		}
 	}
@@ -437,19 +437,17 @@ update_tree(struct fw_card *card, struct fw_node *root)
 			card->irm_node = node0;
 
 		for (i = 0; i < node0->port_count; i++) {
-			if (node0->ports[i].node && node1->ports[i].node) {
+			if (node0->ports[i] && node1->ports[i]) {
 				/*
 				 * This port didn't change, queue the
 				 * connected node for further
 				 * investigation.
 				 */
-				if (node0->ports[i].node->color == card->color)
+				if (node0->ports[i]->color == card->color)
 					continue;
-				list_add_tail(&node0->ports[i].node->link,
-					      &list0);
-				list_add_tail(&node1->ports[i].node->link,
-					      &list1);
-			} else if (node0->ports[i].node) {
+				list_add_tail(&node0->ports[i]->link, &list0);
+				list_add_tail(&node1->ports[i]->link, &list1);
+			} else if (node0->ports[i]) {
 				/*
 				 * The nodes connected here were
 				 * unplugged; unref the lost nodes and
@@ -457,10 +455,10 @@ update_tree(struct fw_card *card, struct fw_node *root)
 				 * them.
 				 */
 
-				for_each_fw_node(card, node0->ports[i].node,
+				for_each_fw_node(card, node0->ports[i],
 						 report_lost_node);
-				node0->ports[i].node = NULL;
-			} else if (node1->ports[i].node) {
+				node0->ports[i] = NULL;
+			} else if (node1->ports[i]) {
 				/*
 				 * One or more node were connected to
 				 * this port. Move the new nodes into
@@ -468,7 +466,7 @@ update_tree(struct fw_card *card, struct fw_node *root)
 				 * callbacks for them.
 				 */
 				move_tree(node0, node1, i);
-				for_each_fw_node(card, node0->ports[i].node,
+				for_each_fw_node(card, node0->ports[i],
 						 report_found_node);
 			}
 		}
diff --git a/drivers/firewire/fw-topology.h b/drivers/firewire/fw-topology.h
index 363b6cbcd0b3..1b56b4ac7fb2 100644
--- a/drivers/firewire/fw-topology.h
+++ b/drivers/firewire/fw-topology.h
@@ -20,12 +20,6 @@
 #define __fw_topology_h
 
 enum {
-	FW_TOPOLOGY_A =		0x01,
-	FW_TOPOLOGY_B =		0x02,
-	FW_TOPOLOGY_MIXED =	0x03,
-};
-
-enum {
 	FW_NODE_CREATED =   0x00,
 	FW_NODE_UPDATED =   0x01,
 	FW_NODE_DESTROYED = 0x02,
@@ -33,21 +27,16 @@ enum {
 	FW_NODE_LINK_OFF =  0x04,
 };
 
-struct fw_port {
-	struct fw_node *node;
-	unsigned speed : 3; /* S100, S200, ... S3200 */
-};
-
 struct fw_node {
 	u16 node_id;
 	u8 color;
 	u8 port_count;
-	unsigned link_on : 1;
-	unsigned initiated_reset : 1;
-	unsigned b_path : 1;
-	u8 phy_speed : 3; /* As in the self ID packet. */
-	u8 max_speed : 5; /* Minimum of all phy-speeds and port speeds on
-			   * the path from the local node to this node. */
+	u8 link_on : 1;
+	u8 initiated_reset : 1;
+	u8 b_path : 1;
+	u8 phy_speed : 2; /* As in the self ID packet. */
+	u8 max_speed : 2; /* Minimum of all phy-speeds on the path from the
+			   * local node to this node. */
 	u8 max_depth : 4; /* Maximum depth to any leaf node */
 	u8 max_hops : 4;  /* Max hops in this sub tree */
 	atomic_t ref_count;
@@ -58,7 +47,7 @@ struct fw_node {
 	/* Upper layer specific data. */
 	void *data;
 
-	struct fw_port ports[0];
+	struct fw_node *ports[0];
 };
 
 static inline struct fw_node *
diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h
index acdc3be38c61..5abed193f4a6 100644
--- a/drivers/firewire/fw-transaction.h
+++ b/drivers/firewire/fw-transaction.h
@@ -81,7 +81,6 @@
 
 #define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args)
 #define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
-#define fw_debug(s, args...) printk(KERN_DEBUG KBUILD_MODNAME ": " s, ## args)
 
 static inline void
 fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
@@ -246,7 +245,7 @@ struct fw_card {
 	struct fw_node *irm_node;
 	int color;
 	int gap_count;
-	int topology_type;
+	bool beta_repeaters_present;
 
 	int index;
 
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 88f462122a30..05f02a326f1c 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -84,4 +84,13 @@ config DCDBAS
 	  Say Y or M here to enable the driver for use by Dell systems
 	  management software such as Dell OpenManage.
 
+config DMIID
+    bool "Export DMI identification via sysfs to userspace"
+    depends on DMI
+    default y
+	help
+	  Say Y here if you want to query SMBIOS/DMI system identification
+	  information from userspace through /sys/class/dmi/id/ or if you want
+	  DMI-based module auto-loading.
+
 endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 98e395f4bb29..8d4ebc805a50 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_EFI_VARS)		+= efivars.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
 obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
 obj-$(CONFIG_DCDBAS)		+= dcdbas.o
+obj-$(CONFIG_DMIID)		+= dmi-id.o
diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c
index 1865b56fb141..18cdcb3ae1ca 100644
--- a/drivers/firmware/dcdbas.c
+++ b/drivers/firmware/dcdbas.c
@@ -149,8 +149,9 @@ static ssize_t smi_data_buf_size_store(struct device *dev,
 	return count;
 }
 
-static ssize_t smi_data_read(struct kobject *kobj, char *buf, loff_t pos,
-			     size_t count)
+static ssize_t smi_data_read(struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buf, loff_t pos, size_t count)
 {
 	size_t max_read;
 	ssize_t ret;
@@ -170,8 +171,9 @@ out:
 	return ret;
 }
 
-static ssize_t smi_data_write(struct kobject *kobj, char *buf, loff_t pos,
-			      size_t count)
+static ssize_t smi_data_write(struct kobject *kobj,
+			      struct bin_attribute *bin_attr,
+			      char *buf, loff_t pos, size_t count)
 {
 	ssize_t ret;
 
diff --git a/drivers/firmware/dcdbas.h b/drivers/firmware/dcdbas.h
index 58a85182b3e8..dcdba0f1b32c 100644
--- a/drivers/firmware/dcdbas.h
+++ b/drivers/firmware/dcdbas.h
@@ -67,8 +67,7 @@
 #define DCDBAS_BIN_ATTR_RW(_name) \
 struct bin_attribute bin_attr_##_name = { \
 	.attr =  { .name = __stringify(_name), \
-		   .mode = 0600, \
-		   .owner = THIS_MODULE }, \
+		   .mode = 0600 }, \
 	.read =  _name##_read, \
 	.write = _name##_write, \
 }
diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
index fc702e40bd43..477a3d0e3caf 100644
--- a/drivers/firmware/dell_rbu.c
+++ b/drivers/firmware/dell_rbu.c
@@ -543,8 +543,9 @@ static ssize_t read_rbu_mono_data(char *buffer, loff_t pos, size_t count)
 	return ret_count;
 }
 
-static ssize_t read_rbu_data(struct kobject *kobj, char *buffer,
-	loff_t pos, size_t count)
+static ssize_t read_rbu_data(struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buffer, loff_t pos, size_t count)
 {
 	ssize_t ret_count = 0;
 
@@ -591,8 +592,9 @@ static void callbackfn_rbu(const struct firmware *fw, void *context)
 	spin_unlock(&rbu_data.lock);
 }
 
-static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer,
-	loff_t pos, size_t count)
+static ssize_t read_rbu_image_type(struct kobject *kobj,
+				   struct bin_attribute *bin_attr,
+				   char *buffer, loff_t pos, size_t count)
 {
 	int size = 0;
 	if (!pos)
@@ -600,8 +602,9 @@ static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer,
 	return size;
 }
 
-static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer,
-	loff_t pos, size_t count)
+static ssize_t write_rbu_image_type(struct kobject *kobj,
+				    struct bin_attribute *bin_attr,
+				    char *buffer, loff_t pos, size_t count)
 {
 	int rc = count;
 	int req_firm_rc = 0;
@@ -660,8 +663,9 @@ static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer,
 	return rc;
 }
 
-static ssize_t read_rbu_packet_size(struct kobject *kobj, char *buffer,
-	loff_t pos, size_t count)
+static ssize_t read_rbu_packet_size(struct kobject *kobj,
+				    struct bin_attribute *bin_attr,
+				    char *buffer, loff_t pos, size_t count)
 {
 	int size = 0;
 	if (!pos) {
@@ -672,8 +676,9 @@ static ssize_t read_rbu_packet_size(struct kobject *kobj, char *buffer,
 	return size;
 }
 
-static ssize_t write_rbu_packet_size(struct kobject *kobj, char *buffer,
-	loff_t pos, size_t count)
+static ssize_t write_rbu_packet_size(struct kobject *kobj,
+				     struct bin_attribute *bin_attr,
+				     char *buffer, loff_t pos, size_t count)
 {
 	unsigned long temp;
 	spin_lock(&rbu_data.lock);
@@ -687,18 +692,18 @@ static ssize_t write_rbu_packet_size(struct kobject *kobj, char *buffer,
 }
 
 static struct bin_attribute rbu_data_attr = {
-	.attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444},
+	.attr = {.name = "data", .mode = 0444},
 	.read = read_rbu_data,
 };
 
 static struct bin_attribute rbu_image_type_attr = {
-	.attr = {.name = "image_type",.owner = THIS_MODULE,.mode = 0644},
+	.attr = {.name = "image_type", .mode = 0644},
 	.read = read_rbu_image_type,
 	.write = write_rbu_image_type,
 };
 
 static struct bin_attribute rbu_packet_size_attr = {
-	.attr = {.name = "packet_size",.owner = THIS_MODULE,.mode = 0644},
+	.attr = {.name = "packet_size", .mode = 0644},
 	.read = read_rbu_packet_size,
 	.write = write_rbu_packet_size,
 };
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
new file mode 100644
index 000000000000..59c3b5aa89f4
--- /dev/null
+++ b/drivers/firmware/dmi-id.c
@@ -0,0 +1,222 @@
+/*
+ * Export SMBIOS/DMI info via sysfs to userspace
+ *
+ * Copyright 2007, Lennart Poettering
+ *
+ * Licensed under GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/device.h>
+#include <linux/autoconf.h>
+
+#define DEFINE_DMI_ATTR(_name, _mode, _show)		\
+static struct device_attribute sys_dmi_##_name##_attr =	\
+	__ATTR(_name, _mode, _show, NULL);
+
+#define DEFINE_DMI_ATTR_WITH_SHOW(_name, _mode, _field)			\
+static ssize_t sys_dmi_##_name##_show(struct device *dev,		\
+				      struct device_attribute *attr,	\
+				      char *page)			\
+{									\
+	ssize_t len;							\
+	len = scnprintf(page, PAGE_SIZE, "%s\n", dmi_get_system_info(_field)); \
+	page[len-1] = '\n';						\
+	return len;							\
+}									\
+DEFINE_DMI_ATTR(_name, _mode, sys_dmi_##_name##_show);
+
+DEFINE_DMI_ATTR_WITH_SHOW(bios_vendor,		0444, DMI_BIOS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_version,		0444, DMI_BIOS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_date,		0444, DMI_BIOS_DATE);
+DEFINE_DMI_ATTR_WITH_SHOW(sys_vendor,		0444, DMI_SYS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(product_name,		0444, DMI_PRODUCT_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(product_version,	0444, DMI_PRODUCT_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(product_serial,	0400, DMI_PRODUCT_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(product_uuid,		0400, DMI_PRODUCT_UUID);
+DEFINE_DMI_ATTR_WITH_SHOW(board_vendor,		0444, DMI_BOARD_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(board_name,		0444, DMI_BOARD_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(board_version,	0444, DMI_BOARD_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(board_serial,		0400, DMI_BOARD_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(board_asset_tag,	0444, DMI_BOARD_ASSET_TAG);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_vendor,	0444, DMI_CHASSIS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_type,		0444, DMI_CHASSIS_TYPE);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_version,	0444, DMI_CHASSIS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_serial,	0400, DMI_CHASSIS_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_asset_tag,	0444, DMI_CHASSIS_ASSET_TAG);
+
+static void ascii_filter(char *d, const char *s)
+{
+	/* Filter out characters we don't want to see in the modalias string */
+	for (; *s; s++)
+		if (*s > ' ' && *s < 127 && *s != ':')
+			*(d++) = *s;
+
+	*d = 0;
+}
+
+static ssize_t get_modalias(char *buffer, size_t buffer_size)
+{
+	static const struct mafield {
+		const char *prefix;
+		int field;
+	} fields[] = {
+		{ "bvn", DMI_BIOS_VENDOR },
+		{ "bvr", DMI_BIOS_VERSION },
+		{ "bd",  DMI_BIOS_DATE },
+		{ "svn", DMI_SYS_VENDOR },
+		{ "pn",  DMI_PRODUCT_NAME },
+		{ "pvr", DMI_PRODUCT_VERSION },
+		{ "rvn", DMI_BOARD_VENDOR },
+		{ "rn",  DMI_BOARD_NAME },
+		{ "rvr", DMI_BOARD_VERSION },
+		{ "cvn", DMI_CHASSIS_VENDOR },
+		{ "ct",  DMI_CHASSIS_TYPE },
+		{ "cvr", DMI_CHASSIS_VERSION },
+		{ NULL,  DMI_NONE }
+	};
+
+	ssize_t l, left;
+	char *p;
+	const struct mafield *f;
+
+	strcpy(buffer, "dmi");
+	p = buffer + 3; left = buffer_size - 4;
+
+	for (f = fields; f->prefix && left > 0; f++) {
+		const char *c;
+		char *t;
+
+		c = dmi_get_system_info(f->field);
+		if (!c)
+			continue;
+
+		t = kmalloc(strlen(c) + 1, GFP_KERNEL);
+		if (!t)
+			break;
+		ascii_filter(t, c);
+		l = scnprintf(p, left, ":%s%s", f->prefix, t);
+		kfree(t);
+
+		p += l;
+		left -= l;
+	}
+
+	p[0] = ':';
+	p[1] = 0;
+
+	return p - buffer + 1;
+}
+
+static ssize_t sys_dmi_modalias_show(struct device *dev,
+				     struct device_attribute *attr, char *page)
+{
+	ssize_t r;
+	r = get_modalias(page, PAGE_SIZE-1);
+	page[r] = '\n';
+	page[r+1] = 0;
+	return r+1;
+}
+
+DEFINE_DMI_ATTR(modalias, 0444, sys_dmi_modalias_show);
+
+static struct attribute *sys_dmi_attributes[DMI_STRING_MAX+2];
+
+static struct attribute_group sys_dmi_attribute_group = {
+	.attrs = sys_dmi_attributes,
+};
+
+static struct attribute_group* sys_dmi_attribute_groups[] = {
+	&sys_dmi_attribute_group,
+	NULL
+};
+
+static int dmi_dev_uevent(struct device *dev, char **envp,
+			    int num_envp, char *buffer, int buffer_size)
+{
+	strcpy(buffer, "MODALIAS=");
+	get_modalias(buffer+9, buffer_size-9);
+	envp[0] = buffer;
+	envp[1] = NULL;
+
+	return 0;
+}
+
+static struct class dmi_class = {
+	.name = "dmi",
+	.dev_release = (void(*)(struct device *)) kfree,
+	.dev_uevent = dmi_dev_uevent,
+};
+
+static struct device *dmi_dev;
+
+/* Initialization */
+
+#define ADD_DMI_ATTR(_name, _field) \
+	if (dmi_get_system_info(_field)) \
+		sys_dmi_attributes[i++] = & sys_dmi_##_name##_attr.attr;
+
+extern int dmi_available;
+
+static int __init dmi_id_init(void)
+{
+	int ret, i;
+
+	if (!dmi_available)
+		return -ENODEV;
+
+	/* Not necessarily all DMI fields are available on all
+	 * systems, hence let's built an attribute table of just
+	 * what's available */
+	i = 0;
+	ADD_DMI_ATTR(bios_vendor,       DMI_BIOS_VENDOR);
+	ADD_DMI_ATTR(bios_version,      DMI_BIOS_VERSION);
+	ADD_DMI_ATTR(bios_date,         DMI_BIOS_DATE);
+	ADD_DMI_ATTR(sys_vendor,        DMI_SYS_VENDOR);
+	ADD_DMI_ATTR(product_name,      DMI_PRODUCT_NAME);
+	ADD_DMI_ATTR(product_version,   DMI_PRODUCT_VERSION);
+	ADD_DMI_ATTR(product_serial,    DMI_PRODUCT_SERIAL);
+	ADD_DMI_ATTR(product_uuid,      DMI_PRODUCT_UUID);
+	ADD_DMI_ATTR(board_vendor,      DMI_BOARD_VENDOR);
+	ADD_DMI_ATTR(board_name,        DMI_BOARD_NAME);
+	ADD_DMI_ATTR(board_version,     DMI_BOARD_VERSION);
+	ADD_DMI_ATTR(board_serial,      DMI_BOARD_SERIAL);
+	ADD_DMI_ATTR(board_asset_tag,   DMI_BOARD_ASSET_TAG);
+	ADD_DMI_ATTR(chassis_vendor,    DMI_CHASSIS_VENDOR);
+	ADD_DMI_ATTR(chassis_type,      DMI_CHASSIS_TYPE);
+	ADD_DMI_ATTR(chassis_version,   DMI_CHASSIS_VERSION);
+	ADD_DMI_ATTR(chassis_serial,    DMI_CHASSIS_SERIAL);
+	ADD_DMI_ATTR(chassis_asset_tag, DMI_CHASSIS_ASSET_TAG);
+	sys_dmi_attributes[i++] = &sys_dmi_modalias_attr.attr;
+
+	ret = class_register(&dmi_class);
+	if (ret)
+		return ret;
+
+	dmi_dev = kzalloc(sizeof(*dmi_dev), GFP_KERNEL);
+	if (!dmi_dev) {
+		ret = -ENOMEM;
+		goto fail_class_unregister;
+	}
+
+	dmi_dev->class = &dmi_class;
+	strcpy(dmi_dev->bus_id, "id");
+	dmi_dev->groups = sys_dmi_attribute_groups;
+
+	ret = device_register(dmi_dev);
+	if (ret)
+		goto fail_class_unregister;
+
+	return 0;
+
+fail_class_unregister:
+
+	class_unregister(&dmi_class);
+
+	return ret;
+}
+
+arch_initcall(dmi_id_init);
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 37deee6c0c1c..f7318b3b51f2 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -84,6 +84,7 @@ static int __init dmi_checksum(u8 *buf)
 
 static char *dmi_ident[DMI_STRING_MAX];
 static LIST_HEAD(dmi_devices);
+int dmi_available;
 
 /*
  *	Save a DMI string
@@ -102,6 +103,51 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
 	dmi_ident[slot] = p;
 }
 
+static void __init dmi_save_uuid(struct dmi_header *dm, int slot, int index)
+{
+	u8 *d = (u8*) dm + index;
+	char *s;
+	int is_ff = 1, is_00 = 1, i;
+
+	if (dmi_ident[slot])
+		return;
+
+	for (i = 0; i < 16 && (is_ff || is_00); i++) {
+		if(d[i] != 0x00) is_ff = 0;
+		if(d[i] != 0xFF) is_00 = 0;
+	}
+
+	if (is_ff || is_00)
+		return;
+
+	s = dmi_alloc(16*2+4+1);
+	if (!s)
+		return;
+
+	sprintf(s,
+		"%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X",
+		d[0], d[1], d[2], d[3], d[4], d[5], d[6], d[7],
+		d[8], d[9], d[10], d[11], d[12], d[13], d[14], d[15]);
+
+        dmi_ident[slot] = s;
+}
+
+static void __init dmi_save_type(struct dmi_header *dm, int slot, int index)
+{
+	u8 *d = (u8*) dm + index;
+	char *s;
+
+	if (dmi_ident[slot])
+		return;
+
+	s = dmi_alloc(4);
+	if (!s)
+		return;
+
+	sprintf(s, "%u", *d & 0x7F);
+	dmi_ident[slot] = s;
+}
+
 static void __init dmi_save_devices(struct dmi_header *dm)
 {
 	int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
@@ -192,11 +238,21 @@ static void __init dmi_decode(struct dmi_header *dm)
 		dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
 		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
 		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
+		dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8);
 		break;
 	case 2:		/* Base Board Information */
 		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
 		dmi_save_ident(dm, DMI_BOARD_NAME, 5);
 		dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+		dmi_save_ident(dm, DMI_BOARD_SERIAL, 7);
+		dmi_save_ident(dm, DMI_BOARD_ASSET_TAG, 8);
+		break;
+	case 3:		/* Chassis Information */
+		dmi_save_ident(dm, DMI_CHASSIS_VENDOR, 4);
+		dmi_save_type(dm, DMI_CHASSIS_TYPE, 5);
+		dmi_save_ident(dm, DMI_CHASSIS_VERSION, 6);
+		dmi_save_ident(dm, DMI_CHASSIS_SERIAL, 7);
+		dmi_save_ident(dm, DMI_CHASSIS_ASSET_TAG, 8);
 		break;
 	case 10:	/* Onboard Devices Information */
 		dmi_save_devices(dm);
@@ -243,18 +299,20 @@ void __init dmi_scan_machine(void)
 		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
 			goto out;
 
-               /* This is called as a core_initcall() because it isn't
-                * needed during early boot.  This also means we can
-                * iounmap the space when we're done with it.
-		*/
+		/* This is called as a core_initcall() because it isn't
+		 * needed during early boot.  This also means we can
+		 * iounmap the space when we're done with it.
+		 */
 		p = dmi_ioremap(efi.smbios, 32);
 		if (p == NULL)
 			goto out;
 
 		rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
 		dmi_iounmap(p, 32);
-		if (!rc)
+		if (!rc) {
+			dmi_available = 1;
 			return;
+		}
 	}
 	else {
 		/*
@@ -268,8 +326,10 @@ void __init dmi_scan_machine(void)
 
 		for (q = p; q < p + 0x10000; q += 16) {
 			rc = dmi_present(q);
-			if (!rc)
+			if (!rc) {
+				dmi_available = 1;
 				return;
+			}
 		}
 	}
  out:	printk(KERN_INFO "DMI not present or invalid.\n");
@@ -404,3 +464,4 @@ int dmi_get_year(int field)
 
 	return year;
 }
+
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index d8806e4f1829..15232271d848 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -74,7 +74,7 @@ static struct edd_device *edd_devices[EDD_MBR_SIG_MAX];
 
 #define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
 struct edd_attribute edd_attr_##_name = { 	\
-	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE },	\
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
 	.show	= _show,				\
 	.test	= _test,				\
 };
diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c
index 1324984a4c35..bfd2d67df689 100644
--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -131,21 +131,21 @@ struct efivar_attribute {
 
 #define EFI_ATTR(_name, _mode, _show, _store) \
 struct subsys_attribute efi_attr_##_name = { \
-	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.attr = {.name = __stringify(_name), .mode = _mode}, \
 	.show = _show, \
 	.store = _store, \
 };
 
 #define EFIVAR_ATTR(_name, _mode, _show, _store) \
 struct efivar_attribute efivar_attr_##_name = { \
-	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.attr = {.name = __stringify(_name), .mode = _mode}, \
 	.show = _show, \
 	.store = _store, \
 };
 
 #define VAR_SUBSYS_ATTR(_name, _mode, _show, _store) \
 struct subsys_attribute var_subsys_attr_##_name = { \
-	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.attr = {.name = __stringify(_name), .mode = _mode}, \
 	.show = _show, \
 	.store = _store, \
 };
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 8fbe9fdac128..3b63b0b78122 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1,8 +1,12 @@
 #
 # HID driver configuration
 #
-menu "HID Devices"
+menuconfig HID_SUPPORT
+	bool "HID Devices"
 	depends on INPUT
+	default y
+
+if HID_SUPPORT
 
 config HID
 	tristate "Generic HID support"
@@ -24,6 +28,7 @@ config HID
 
 config HID_DEBUG
 	bool "HID debugging support"
+	default y if !EMBEDDED
 	depends on HID
 	---help---
 	This option lets the HID layer output diagnostics about its internal
@@ -38,5 +43,4 @@ config HID_DEBUG
 
 source "drivers/hid/usbhid/Kconfig"
 
-endmenu
-
+endif # HID_SUPPORT
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 6ec04e79f685..317cf8a7b63c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -40,6 +40,13 @@
 #define DRIVER_DESC "HID core driver"
 #define DRIVER_LICENSE "GPL"
 
+#ifdef CONFIG_HID_DEBUG
+int hid_debug = 0;
+module_param_named(debug, hid_debug, bool, 0600);
+MODULE_PARM_DESC(debug, "Turn HID debugging mode on and off");
+EXPORT_SYMBOL_GPL(hid_debug);
+#endif
+
 /*
  * Register a new report for a device.
  */
@@ -78,7 +85,7 @@ static struct hid_field *hid_register_field(struct hid_report *report, unsigned
 	struct hid_field *field;
 
 	if (report->maxfield == HID_MAX_FIELDS) {
-		dbg("too many fields in report");
+		dbg_hid("too many fields in report\n");
 		return NULL;
 	}
 
@@ -106,7 +113,7 @@ static int open_collection(struct hid_parser *parser, unsigned type)
 	usage = parser->local.usage[0];
 
 	if (parser->collection_stack_ptr == HID_COLLECTION_STACK_SIZE) {
-		dbg("collection stack overflow");
+		dbg_hid("collection stack overflow\n");
 		return -1;
 	}
 
@@ -114,7 +121,7 @@ static int open_collection(struct hid_parser *parser, unsigned type)
 		collection = kmalloc(sizeof(struct hid_collection) *
 				parser->device->collection_size * 2, GFP_KERNEL);
 		if (collection == NULL) {
-			dbg("failed to reallocate collection array");
+			dbg_hid("failed to reallocate collection array\n");
 			return -1;
 		}
 		memcpy(collection, parser->device->collection,
@@ -150,7 +157,7 @@ static int open_collection(struct hid_parser *parser, unsigned type)
 static int close_collection(struct hid_parser *parser)
 {
 	if (!parser->collection_stack_ptr) {
-		dbg("collection stack underflow");
+		dbg_hid("collection stack underflow\n");
 		return -1;
 	}
 	parser->collection_stack_ptr--;
@@ -178,7 +185,7 @@ static unsigned hid_lookup_collection(struct hid_parser *parser, unsigned type)
 static int hid_add_usage(struct hid_parser *parser, unsigned usage)
 {
 	if (parser->local.usage_index >= HID_MAX_USAGES) {
-		dbg("usage index exceeded");
+		dbg_hid("usage index exceeded\n");
 		return -1;
 	}
 	parser->local.usage[parser->local.usage_index] = usage;
@@ -202,12 +209,12 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign
 	int i;
 
 	if (!(report = hid_register_report(parser->device, report_type, parser->global.report_id))) {
-		dbg("hid_register_report failed");
+		dbg_hid("hid_register_report failed\n");
 		return -1;
 	}
 
 	if (parser->global.logical_maximum < parser->global.logical_minimum) {
-		dbg("logical range invalid %d %d", parser->global.logical_minimum, parser->global.logical_maximum);
+		dbg_hid("logical range invalid %d %d\n", parser->global.logical_minimum, parser->global.logical_maximum);
 		return -1;
 	}
 
@@ -287,7 +294,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 		case HID_GLOBAL_ITEM_TAG_PUSH:
 
 			if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) {
-				dbg("global enviroment stack overflow");
+				dbg_hid("global enviroment stack overflow\n");
 				return -1;
 			}
 
@@ -298,7 +305,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 		case HID_GLOBAL_ITEM_TAG_POP:
 
 			if (!parser->global_stack_ptr) {
-				dbg("global enviroment stack underflow");
+				dbg_hid("global enviroment stack underflow\n");
 				return -1;
 			}
 
@@ -342,27 +349,27 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 
 		case HID_GLOBAL_ITEM_TAG_REPORT_SIZE:
 			if ((parser->global.report_size = item_udata(item)) > 32) {
-				dbg("invalid report_size %d", parser->global.report_size);
+				dbg_hid("invalid report_size %d\n", parser->global.report_size);
 				return -1;
 			}
 			return 0;
 
 		case HID_GLOBAL_ITEM_TAG_REPORT_COUNT:
 			if ((parser->global.report_count = item_udata(item)) > HID_MAX_USAGES) {
-				dbg("invalid report_count %d", parser->global.report_count);
+				dbg_hid("invalid report_count %d\n", parser->global.report_count);
 				return -1;
 			}
 			return 0;
 
 		case HID_GLOBAL_ITEM_TAG_REPORT_ID:
 			if ((parser->global.report_id = item_udata(item)) == 0) {
-				dbg("report_id 0 is invalid");
+				dbg_hid("report_id 0 is invalid\n");
 				return -1;
 			}
 			return 0;
 
 		default:
-			dbg("unknown global tag 0x%x", item->tag);
+			dbg_hid("unknown global tag 0x%x\n", item->tag);
 			return -1;
 	}
 }
@@ -377,7 +384,7 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 	unsigned n;
 
 	if (item->size == 0) {
-		dbg("item data expected for local item");
+		dbg_hid("item data expected for local item\n");
 		return -1;
 	}
 
@@ -395,14 +402,14 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 				 * items and the first delimiter set.
 				 */
 				if (parser->local.delimiter_depth != 0) {
-					dbg("nested delimiters");
+					dbg_hid("nested delimiters\n");
 					return -1;
 				}
 				parser->local.delimiter_depth++;
 				parser->local.delimiter_branch++;
 			} else {
 				if (parser->local.delimiter_depth < 1) {
-					dbg("bogus close delimiter");
+					dbg_hid("bogus close delimiter\n");
 					return -1;
 				}
 				parser->local.delimiter_depth--;
@@ -412,7 +419,7 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 		case HID_LOCAL_ITEM_TAG_USAGE:
 
 			if (parser->local.delimiter_branch > 1) {
-				dbg("alternative usage ignored");
+				dbg_hid("alternative usage ignored\n");
 				return 0;
 			}
 
@@ -424,7 +431,7 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 		case HID_LOCAL_ITEM_TAG_USAGE_MINIMUM:
 
 			if (parser->local.delimiter_branch > 1) {
-				dbg("alternative usage ignored");
+				dbg_hid("alternative usage ignored\n");
 				return 0;
 			}
 
@@ -437,7 +444,7 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 		case HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM:
 
 			if (parser->local.delimiter_branch > 1) {
-				dbg("alternative usage ignored");
+				dbg_hid("alternative usage ignored\n");
 				return 0;
 			}
 
@@ -446,14 +453,14 @@ static int hid_parser_local(struct hid_parser *parser, struct hid_item *item)
 
 			for (n = parser->local.usage_minimum; n <= data; n++)
 				if (hid_add_usage(parser, n)) {
-					dbg("hid_add_usage failed\n");
+					dbg_hid("hid_add_usage failed\n");
 					return -1;
 				}
 			return 0;
 
 		default:
 
-			dbg("unknown local item tag 0x%x", item->tag);
+			dbg_hid("unknown local item tag 0x%x\n", item->tag);
 			return 0;
 	}
 	return 0;
@@ -487,7 +494,7 @@ static int hid_parser_main(struct hid_parser *parser, struct hid_item *item)
 			ret = hid_add_field(parser, HID_FEATURE_REPORT, data);
 			break;
 		default:
-			dbg("unknown main item tag 0x%x", item->tag);
+			dbg_hid("unknown main item tag 0x%x\n", item->tag);
 			ret = 0;
 	}
 
@@ -502,7 +509,7 @@ static int hid_parser_main(struct hid_parser *parser, struct hid_item *item)
 
 static int hid_parser_reserved(struct hid_parser *parser, struct hid_item *item)
 {
-	dbg("reserved item type, tag 0x%x", item->tag);
+	dbg_hid("reserved item type, tag 0x%x\n", item->tag);
 	return 0;
 }
 
@@ -667,14 +674,14 @@ struct hid_device *hid_parse_report(__u8 *start, unsigned size)
 	while ((start = fetch_item(start, end, &item)) != NULL) {
 
 		if (item.format != HID_ITEM_FORMAT_SHORT) {
-			dbg("unexpected long global item");
+			dbg_hid("unexpected long global item\n");
 			hid_free_device(device);
 			vfree(parser);
 			return NULL;
 		}
 
 		if (dispatch_type[item.type](parser, &item)) {
-			dbg("item %u %u %u %u parsing failed\n",
+			dbg_hid("item %u %u %u %u parsing failed\n",
 				item.format, (unsigned)item.size, (unsigned)item.type, (unsigned)item.tag);
 			hid_free_device(device);
 			vfree(parser);
@@ -683,13 +690,13 @@ struct hid_device *hid_parse_report(__u8 *start, unsigned size)
 
 		if (start == end) {
 			if (parser->collection_stack_ptr) {
-				dbg("unbalanced collection at end of report description");
+				dbg_hid("unbalanced collection at end of report description\n");
 				hid_free_device(device);
 				vfree(parser);
 				return NULL;
 			}
 			if (parser->local.delimiter_depth) {
-				dbg("unbalanced delimiter at end of report description");
+				dbg_hid("unbalanced delimiter at end of report description\n");
 				hid_free_device(device);
 				vfree(parser);
 				return NULL;
@@ -699,7 +706,7 @@ struct hid_device *hid_parse_report(__u8 *start, unsigned size)
 		}
 	}
 
-	dbg("item fetching failed at offset %d\n", (int)(end - start));
+	dbg_hid("item fetching failed at offset %d\n", (int)(end - start));
 	hid_free_device(device);
 	vfree(parser);
 	return NULL;
@@ -915,13 +922,13 @@ int hid_set_field(struct hid_field *field, unsigned offset, __s32 value)
 	hid_dump_input(field->usage + offset, value);
 
 	if (offset >= field->report_count) {
-		dbg("offset (%d) exceeds report_count (%d)", offset, field->report_count);
+		dbg_hid("offset (%d) exceeds report_count (%d)\n", offset, field->report_count);
 		hid_dump_field(field, 8);
 		return -1;
 	}
 	if (field->logical_minimum < 0) {
 		if (value != snto32(s32ton(value, size), size)) {
-			dbg("value %d is out of range", value);
+			dbg_hid("value %d is out of range\n", value);
 			return -1;
 		}
 	}
@@ -934,19 +941,17 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i
 {
 	struct hid_report_enum *report_enum = hid->report_enum + type;
 	struct hid_report *report;
-	int n, rsize;
+	int n, rsize, i;
 
 	if (!hid)
 		return -ENODEV;
 
 	if (!size) {
-		dbg("empty report");
+		dbg_hid("empty report\n");
 		return -1;
 	}
 
-#ifdef CONFIG_HID_DEBUG
-	printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
-#endif
+	dbg_hid("report (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
 
 	n = 0;                          /* Normally report number is 0 */
 	if (report_enum->numbered) {    /* Device uses numbered reports, data[0] is report number */
@@ -954,25 +959,21 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i
 		size--;
 	}
 
-#ifdef CONFIG_HID_DEBUG
-	{
-		int i;
-		printk(KERN_DEBUG __FILE__ ": report %d (size %u) = ", n, size);
-		for (i = 0; i < size; i++)
-			printk(" %02x", data[i]);
-		printk("\n");
-	}
-#endif
+	/* dump the report descriptor */
+	dbg_hid("report %d (size %u) = ", n, size);
+	for (i = 0; i < size; i++)
+		dbg_hid_line(" %02x", data[i]);
+	dbg_hid_line("\n");
 
 	if (!(report = report_enum->report_id_hash[n])) {
-		dbg("undefined report_id %d received", n);
+		dbg_hid("undefined report_id %d received\n", n);
 		return -1;
 	}
 
 	rsize = ((report->size - 1) >> 3) + 1;
 
 	if (size < rsize) {
-		dbg("report %d is too short, (%d < %d)", report->id, size, rsize);
+		dbg_hid("report %d is too short, (%d < %d)\n", report->id, size, rsize);
 		memset(data + size, 0, rsize - size);
 	}
 
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 83c4126b37c3..a13757b78980 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -347,6 +347,9 @@ static void resolv_usage_page(unsigned page) {
 void hid_resolv_usage(unsigned usage) {
 	const struct hid_usage_entry *p;
 
+	if (!hid_debug)
+		return;
+
 	resolv_usage_page(usage >> 16);
 	printk(".");
 	for (p = hid_usage_table; p->description; p++)
@@ -369,6 +372,9 @@ __inline__ static void tab(int n) {
 void hid_dump_field(struct hid_field *field, int n) {
 	int j;
 
+	if (!hid_debug)
+		return;
+
 	if (field->physical) {
 		tab(n);
 		printk("Physical(");
@@ -466,6 +472,9 @@ void hid_dump_device(struct hid_device *device) {
 	unsigned i,k;
 	static char *table[] = {"INPUT", "OUTPUT", "FEATURE"};
 
+	if (!hid_debug)
+		return;
+
 	for (i = 0; i < HID_REPORT_TYPES; i++) {
 		report_enum = device->report_enum + i;
 		list = report_enum->report_list.next;
@@ -489,6 +498,9 @@ void hid_dump_device(struct hid_device *device) {
 EXPORT_SYMBOL_GPL(hid_dump_device);
 
 void hid_dump_input(struct hid_usage *usage, __s32 value) {
+	if (!hid_debug)
+		return;
+
 	printk("hid-debug: input ");
 	hid_resolv_usage(usage->hid);
 	printk(" = %d\n", value);
@@ -758,6 +770,9 @@ static char **names[EV_MAX + 1] = {
 
 void hid_resolv_event(__u8 type, __u16 code) {
 
+	if (!hid_debug)
+		return;
+
 	printk("%s.%s", events[type] ? events[type] : "?",
 		names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
 }
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 7f817897b178..8edbd30cf795 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -60,6 +60,19 @@ static const unsigned char hid_keyboard[256] = {
 	150,158,159,128,136,177,178,176,142,152,173,140,unk,unk,unk,unk
 };
 
+/* extended mapping for certain Logitech hardware (Logitech cordless desktop LX500) */
+#define LOGITECH_EXPANDED_KEYMAP_SIZE 80
+static int logitech_expanded_keymap[LOGITECH_EXPANDED_KEYMAP_SIZE] = {
+	  0,216,  0,213,175,156,  0,  0,  0,  0,
+	144,  0,  0,  0,  0,  0,  0,  0,  0,212,
+	174,167,152,161,112,  0,  0,  0,154,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,183,184,185,186,187,
+	188,189,190,191,192,193,194,  0,  0,  0
+};
+
 static const struct {
 	__s32 x;
 	__s32 y;
@@ -308,9 +321,7 @@ static int hidinput_setkeycode(struct input_dev *dev, int scancode,
 		
 		clear_bit(old_keycode, dev->keybit);
 		set_bit(usage->code, dev->keybit);
-#ifdef CONFIG_HID_DEBUG
-		printk (KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", keycode, scancode);
-#endif
+		dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n", keycode, scancode);
 		/* Set the keybit for the old keycode if the old keycode is used
 		 * by another key */
 		if (hidinput_find_key (hid, 0, old_keycode))
@@ -333,11 +344,9 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 
 	field->hidinput = hidinput;
 
-#ifdef CONFIG_HID_DEBUG
-	printk(KERN_DEBUG "Mapping: ");
+	dbg_hid("Mapping: ");
 	hid_resolv_usage(usage->hid);
-	printk(" ---> ");
-#endif
+	dbg_hid_line(" ---> ");
 
 	if (field->flags & HID_MAIN_ITEM_CONSTANT)
 		goto ignore;
@@ -378,6 +387,21 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 					}
 			}
 
+			/* Special handling for Logitech Cordless Desktop */
+			if (field->application != HID_GD_MOUSE) {
+				if (device->quirks & HID_QUIRK_LOGITECH_EXPANDED_KEYMAP) {
+					int hid = usage->hid & HID_USAGE;
+					if (hid < LOGITECH_EXPANDED_KEYMAP_SIZE && logitech_expanded_keymap[hid] != 0)
+						code = logitech_expanded_keymap[hid];
+				}
+			} else {
+				if (device->quirks & HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL) {
+					int hid = usage->hid & HID_USAGE;
+					if (hid == 7 || hid == 8)
+						goto ignore;
+				}
+			}
+
 			map_key(code);
 			break;
 
@@ -566,6 +590,11 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case 0x0e5: map_key_clear(KEY_BASSBOOST);	break;
 				case 0x0e9: map_key_clear(KEY_VOLUMEUP);	break;
 				case 0x0ea: map_key_clear(KEY_VOLUMEDOWN);	break;
+
+				/* reserved in HUT 1.12. Reported on Petalynx remote */
+				case 0x0f6: map_key_clear(KEY_NEXT);		break;
+				case 0x0fa: map_key_clear(KEY_BACK);		break;
+
 				case 0x183: map_key_clear(KEY_CONFIG);		break;
 				case 0x184: map_key_clear(KEY_WORDPROCESSOR);	break;
 				case 0x185: map_key_clear(KEY_EDITOR);		break;
@@ -598,7 +627,9 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case 0x21b: map_key_clear(KEY_COPY);		break;
 				case 0x21c: map_key_clear(KEY_CUT);		break;
 				case 0x21d: map_key_clear(KEY_PASTE);		break;
-				case 0x221: map_key_clear(KEY_FIND);		break;
+				case 0x21f: map_key_clear(KEY_FIND);		break;
+				case 0x221: map_key_clear(KEY_SEARCH);		break;
+				case 0x222: map_key_clear(KEY_GOTO);		break;
 				case 0x223: map_key_clear(KEY_HOMEPAGE);	break;
 				case 0x224: map_key_clear(KEY_BACK);		break;
 				case 0x225: map_key_clear(KEY_FORWARD);		break;
@@ -688,7 +719,28 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			break;
 
 		case HID_UP_MSVENDOR:
-			goto ignore;
+
+			/* special case - Chicony Chicony KU-0418 tactical pad */
+			if (device->vendor == 0x04f2 && device->product == 0x0418) {
+				set_bit(EV_REP, input->evbit);
+				switch(usage->hid & HID_USAGE) {
+					case 0xff01: map_key_clear(BTN_1);		break;
+					case 0xff02: map_key_clear(BTN_2);		break;
+					case 0xff03: map_key_clear(BTN_3);		break;
+					case 0xff04: map_key_clear(BTN_4);		break;
+					case 0xff05: map_key_clear(BTN_5);		break;
+					case 0xff06: map_key_clear(BTN_6);		break;
+					case 0xff07: map_key_clear(BTN_7);		break;
+					case 0xff08: map_key_clear(BTN_8);		break;
+					case 0xff09: map_key_clear(BTN_9);		break;
+					case 0xff0a: map_key_clear(BTN_A);		break;
+					case 0xff0b: map_key_clear(BTN_B);		break;
+					default:    goto ignore;
+				}
+			} else {
+				goto ignore;
+			}
+			break;
 
 		case HID_UP_CUSTOM: /* Reported on Logitech and Powerbook USB keyboards */
 
@@ -704,10 +756,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			}
 			break;
 
-		case HID_UP_LOGIVENDOR: /* Reported on Logitech Ultra X Media Remote */
-
+		case HID_UP_LOGIVENDOR:
 			set_bit(EV_REP, input->evbit);
 			switch(usage->hid & HID_USAGE) {
+				/* Reported on Logitech Ultra X Media Remote */
 				case 0x004: map_key_clear(KEY_AGAIN);		break;
 				case 0x00d: map_key_clear(KEY_HOME);		break;
 				case 0x024: map_key_clear(KEY_SHUFFLE);		break;
@@ -725,6 +777,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case 0x04d: map_key_clear(KEY_SUBTITLE);	break;
 				case 0x051: map_key_clear(KEY_RED);		break;
 				case 0x052: map_key_clear(KEY_CLOSE);		break;
+
+				/* Reported on Petalynx Maxter remote */
+				case 0x05a: map_key_clear(KEY_TEXT);		break;
+				case 0x05b: map_key_clear(KEY_RED);		break;
+				case 0x05c: map_key_clear(KEY_GREEN);		break;
+				case 0x05d: map_key_clear(KEY_YELLOW);		break;
+				case 0x05e: map_key_clear(KEY_BLUE);		break;
+
 				default:    goto ignore;
 			}
 			break;
@@ -818,16 +878,24 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			field->dpad = usage->code;
 	}
 
+	/* for those devices which produce Consumer volume usage as relative,
+	 * we emulate pressing volumeup/volumedown appropriate number of times
+	 * in hidinput_hid_event()
+	 */
+	if ((usage->type == EV_ABS) && (field->flags & HID_MAIN_ITEM_RELATIVE) &&
+			(usage->code == ABS_VOLUME)) {
+		set_bit(KEY_VOLUMEUP, input->keybit);
+		set_bit(KEY_VOLUMEDOWN, input->keybit);
+	}
+
 	hid_resolv_event(usage->type, usage->code);
-#ifdef CONFIG_HID_DEBUG
-	printk("\n");
-#endif
+
+	dbg_hid_line("\n");
+
 	return;
 
 ignore:
-#ifdef CONFIG_HID_DEBUG
-	printk("IGNORED\n");
-#endif
+	dbg_hid_line("IGNORED\n");
 	return;
 }
 
@@ -896,18 +964,33 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 	}
 
 	if (usage->hid == (HID_UP_PID | 0x83UL)) { /* Simultaneous Effects Max */
-		dbg("Maximum Effects - %d",value);
+		dbg_hid("Maximum Effects - %d\n",value);
 		return;
 	}
 
 	if (usage->hid == (HID_UP_PID | 0x7fUL)) {
-		dbg("PID Pool Report\n");
+		dbg_hid("PID Pool Report\n");
 		return;
 	}
 
 	if ((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UNKNOWN */
 		return;
 
+	if ((usage->type == EV_ABS) && (field->flags & HID_MAIN_ITEM_RELATIVE) &&
+			(usage->code == ABS_VOLUME)) {
+		int count = abs(value);
+		int direction = value > 0 ? KEY_VOLUMEUP : KEY_VOLUMEDOWN;
+		int i;
+
+		for (i = 0; i < count; i++) {
+			input_event(input, EV_KEY, direction, 1);
+			input_sync(input);
+			input_event(input, EV_KEY, direction, 0);
+			input_sync(input);
+		}
+		return;
+	}
+
 	input_event(input, usage->type, usage->code, value);
 
 	if ((field->flags & HID_MAIN_ITEM_RELATIVE) && (usage->type == EV_KEY))
@@ -976,7 +1059,7 @@ int hidinput_connect(struct hid_device *hid)
 			if (IS_INPUT_APPLICATION(hid->collection[i].usage))
 				break;
 
-	if (i == hid->maxcollection)
+	if (i == hid->maxcollection && (hid->quirks & HID_QUIRK_HIDINPUT) == 0)
 		return -1;
 
 	if (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORTS)
@@ -994,7 +1077,7 @@ int hidinput_connect(struct hid_device *hid)
 				if (!hidinput || !input_dev) {
 					kfree(hidinput);
 					input_free_device(input_dev);
-					err("Out of memory during hid input probe");
+					err_hid("Out of memory during hid input probe");
 					return -1;
 				}
 
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index d91b9dac6dff..3afa4a5035b7 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -60,6 +60,12 @@ MODULE_PARM_DESC(quirks, "Add/modify USB HID quirks by specifying "
 		" quirks=vendorID:productID:quirks"
 		" where vendorID, productID, and quirks are all in"
 		" 0x-prefixed hex");
+static char *rdesc_quirks_param[MAX_USBHID_BOOT_QUIRKS] = { [ 0 ... (MAX_USBHID_BOOT_QUIRKS - 1) ] = NULL };
+module_param_array_named(rdesc_quirks, rdesc_quirks_param, charp, NULL, 0444);
+MODULE_PARM_DESC(rdesc_quirks, "Add/modify report descriptor quirks by specifying "
+		" rdesc_quirks=vendorID:productID:rdesc_quirks"
+		" where vendorID, productID, and rdesc_quirks are all in"
+		" 0x-prefixed hex");
 /*
  * Input submission and I/O error handler.
  */
@@ -127,7 +133,7 @@ static void hid_reset(struct work_struct *work)
 			hid_io_error(hid);
 		break;
 	default:
-		err("can't reset device, %s-%s/input%d, status %d",
+		err_hid("can't reset device, %s-%s/input%d, status %d",
 				hid_to_usb_dev(hid)->bus->bus_name,
 				hid_to_usb_dev(hid)->devpath,
 				usbhid->ifnum, rc);
@@ -220,7 +226,7 @@ static void hid_irq_in(struct urb *urb)
 	if (status) {
 		clear_bit(HID_IN_RUNNING, &usbhid->iofl);
 		if (status != -EPERM) {
-			err("can't resubmit intr, %s-%s/input%d, status %d",
+			err_hid("can't resubmit intr, %s-%s/input%d, status %d",
 					hid_to_usb_dev(hid)->bus->bus_name,
 					hid_to_usb_dev(hid)->devpath,
 					usbhid->ifnum, status);
@@ -240,10 +246,10 @@ static int hid_submit_out(struct hid_device *hid)
 	usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
 	usbhid->urbout->dev = hid_to_usb_dev(hid);
 
-	dbg("submitting out urb");
+	dbg_hid("submitting out urb\n");
 
 	if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) {
-		err("usb_submit_urb(out) failed");
+		err_hid("usb_submit_urb(out) failed");
 		return -1;
 	}
 
@@ -287,12 +293,12 @@ static int hid_submit_ctrl(struct hid_device *hid)
 	usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum);
 	usbhid->cr->wLength = cpu_to_le16(len);
 
-	dbg("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u",
+	dbg_hid("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u\n",
 		usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report",
 		usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength);
 
 	if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) {
-		err("usb_submit_urb(ctrl) failed");
+		err_hid("usb_submit_urb(ctrl) failed");
 		return -1;
 	}
 
@@ -474,7 +480,7 @@ int usbhid_wait_io(struct hid_device *hid)
 	if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) &&
 					!test_bit(HID_OUT_RUNNING, &usbhid->iofl)),
 					10*HZ)) {
-		dbg("timeout waiting for ctrl or out queue to clear");
+		dbg_hid("timeout waiting for ctrl or out queue to clear\n");
 		return -1;
 	}
 
@@ -633,20 +639,6 @@ static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
 }
 
 /*
- * Cherry Cymotion keyboard have an invalid HID report descriptor,
- * that needs fixing before we can parse it.
- */
-
-static void hid_fixup_cymotion_descriptor(char *rdesc, int rsize)
-{
-	if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
-		info("Fixing up Cherry Cymotion report descriptor");
-		rdesc[11] = rdesc[16] = 0xff;
-		rdesc[12] = rdesc[17] = 0x03;
-	}
-}
-
-/*
  * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
  * to "operational".  Without this, the ps3 controller will not report any
  * events.
@@ -667,51 +659,11 @@ static void hid_fixup_sony_ps3_controller(struct usb_device *dev, int ifnum)
 				 USB_CTRL_GET_TIMEOUT);
 
 	if (result < 0)
-		err("%s failed: %d\n", __func__, result);
+		err_hid("%s failed: %d\n", __func__, result);
 
 	kfree(buf);
 }
 
-/*
- * Certain Logitech keyboards send in report #3 keys which are far
- * above the logical maximum described in descriptor. This extends
- * the original value of 0x28c of logical maximum to 0x104d
- */
-static void hid_fixup_logitech_descriptor(unsigned char *rdesc, int rsize)
-{
-	if (rsize >= 90 && rdesc[83] == 0x26
-			&& rdesc[84] == 0x8c
-			&& rdesc[85] == 0x02) {
-		info("Fixing up Logitech keyboard report descriptor");
-		rdesc[84] = rdesc[89] = 0x4d;
-		rdesc[85] = rdesc[90] = 0x10;
-	}
-}
-
-/*
- * Some USB barcode readers from cypress have usage min and usage max in
- * the wrong order
- */
-static void hid_fixup_cypress_descriptor(unsigned char *rdesc, int rsize)
-{
-	short fixed = 0;
-	int i;
-
-	for (i = 0; i < rsize - 4; i++) {
-		if (rdesc[i] == 0x29 && rdesc [i+2] == 0x19) {
-			unsigned char tmp;
-
-			rdesc[i] = 0x19; rdesc[i+2] = 0x29;
-			tmp = rdesc[i+3];
-			rdesc[i+3] = rdesc[i+1];
-			rdesc[i+1] = tmp;
-		}
-	}
-
-	if (fixed)
-		info("Fixing up Cypress report descriptor");
-}
-
 static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 {
 	struct usb_host_interface *interface = intf->cur_altsetting;
@@ -746,7 +698,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 	if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) &&
 	    (!interface->desc.bNumEndpoints ||
 	     usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
-		dbg("class descriptor not present\n");
+		dbg_hid("class descriptor not present\n");
 		return NULL;
 	}
 
@@ -755,41 +707,34 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 			rsize = le16_to_cpu(hdesc->desc[n].wDescriptorLength);
 
 	if (!rsize || rsize > HID_MAX_DESCRIPTOR_SIZE) {
-		dbg("weird size of report descriptor (%u)", rsize);
+		dbg_hid("weird size of report descriptor (%u)\n", rsize);
 		return NULL;
 	}
 
 	if (!(rdesc = kmalloc(rsize, GFP_KERNEL))) {
-		dbg("couldn't allocate rdesc memory");
+		dbg_hid("couldn't allocate rdesc memory\n");
 		return NULL;
 	}
 
 	hid_set_idle(dev, interface->desc.bInterfaceNumber, 0, 0);
 
 	if ((n = hid_get_class_descriptor(dev, interface->desc.bInterfaceNumber, HID_DT_REPORT, rdesc, rsize)) < 0) {
-		dbg("reading report descriptor failed");
+		dbg_hid("reading report descriptor failed\n");
 		kfree(rdesc);
 		return NULL;
 	}
 
-	if ((quirks & HID_QUIRK_CYMOTION))
-		hid_fixup_cymotion_descriptor(rdesc, rsize);
+	usbhid_fixup_report_descriptor(le16_to_cpu(dev->descriptor.idVendor),
+			le16_to_cpu(dev->descriptor.idProduct), rdesc,
+			rsize, rdesc_quirks_param);
 
-	if (quirks & HID_QUIRK_LOGITECH_DESCRIPTOR)
-		hid_fixup_logitech_descriptor(rdesc, rsize);
-
-	if (quirks & HID_QUIRK_SWAPPED_MIN_MAX)
-		hid_fixup_cypress_descriptor(rdesc, rsize);
-
-#ifdef CONFIG_HID_DEBUG
-	printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n);
+	dbg_hid("report descriptor (size %u, read %d) = ", rsize, n);
 	for (n = 0; n < rsize; n++)
-		printk(" %02x", (unsigned char) rdesc[n]);
-	printk("\n");
-#endif
+		dbg_hid_line(" %02x", (unsigned char) rdesc[n]);
+	dbg_hid_line("\n");
 
 	if (!(hid = hid_parse_report(rdesc, n))) {
-		dbg("parsing report descriptor failed");
+		dbg_hid("parsing report descriptor failed\n");
 		kfree(rdesc);
 		return NULL;
 	}
@@ -861,7 +806,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 	}
 
 	if (!usbhid->urbin) {
-		err("couldn't find an input interrupt endpoint");
+		err_hid("couldn't find an input interrupt endpoint");
 		goto fail;
 	}
 
@@ -956,7 +901,7 @@ static void hid_disconnect(struct usb_interface *intf)
 	usb_kill_urb(usbhid->urbctrl);
 
 	del_timer_sync(&usbhid->io_retry);
-	flush_scheduled_work();
+	cancel_work_sync(&usbhid->reset_work);
 
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_disconnect(hid);
@@ -978,7 +923,7 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	int i;
 	char *c;
 
-	dbg("HID probe called for ifnum %d",
+	dbg_hid("HID probe called for ifnum %d\n",
 			intf->altsetting->desc.bInterfaceNumber);
 
 	if (!(hid = usb_hid_configure(intf)))
diff --git a/drivers/hid/usbhid/hid-lgff.c b/drivers/hid/usbhid/hid-lgff.c
index c5cd4107d6af..4b7ab6a46d93 100644
--- a/drivers/hid/usbhid/hid-lgff.c
+++ b/drivers/hid/usbhid/hid-lgff.c
@@ -78,7 +78,7 @@ static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *ef
 		report->field[0]->value[1] = 0x08;
 		report->field[0]->value[2] = x;
 		report->field[0]->value[3] = y;
-		dbg("(x, y)=(%04x, %04x)", x, y);
+		dbg_hid("(x, y)=(%04x, %04x)\n", x, y);
 		usbhid_submit_report(hid, report, USB_DIR_OUT);
 		break;
 
@@ -93,7 +93,7 @@ static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *ef
 		report->field[0]->value[1] = 0x00;
 		report->field[0]->value[2] = left;
 		report->field[0]->value[3] = right;
-		dbg("(left, right)=(%04x, %04x)", left, right);
+		dbg_hid("(left, right)=(%04x, %04x)\n", left, right);
 		usbhid_submit_report(hid, report, USB_DIR_OUT);
 		break;
 	}
@@ -113,20 +113,20 @@ int hid_lgff_init(struct hid_device* hid)
 
 	/* Find the report to use */
 	if (list_empty(report_list)) {
-		err("No output report found");
+		err_hid("No output report found");
 		return -1;
 	}
 
 	/* Check that the report looks ok */
 	report = list_entry(report_list->next, struct hid_report, list);
 	if (!report) {
-		err("NULL output report");
+		err_hid("NULL output report");
 		return -1;
 	}
 
 	field = report->field[0];
 	if (!field) {
-		err("NULL field");
+		err_hid("NULL field");
 		return -1;
 	}
 
diff --git a/drivers/hid/usbhid/hid-pidff.c b/drivers/hid/usbhid/hid-pidff.c
index f5a90e950e6b..011326178c06 100644
--- a/drivers/hid/usbhid/hid-pidff.c
+++ b/drivers/hid/usbhid/hid-pidff.c
@@ -738,6 +738,7 @@ static void pidff_autocenter(struct pidff_device *pidff, u16 magnitude)
 	pidff->set_effect[PID_TRIGGER_BUTTON].value[0] = 0;
 	pidff->set_effect[PID_TRIGGER_REPEAT_INT].value[0] = 0;
 	pidff_set(&pidff->set_effect[PID_GAIN], magnitude);
+	pidff->set_effect[PID_DIRECTION_ENABLE].value[0] = 1;
 	pidff->set_effect[PID_START_DELAY].value[0] = 0;
 
 	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index f6c4145dc202..775b9f3b8ce3 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -105,6 +105,9 @@
 #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
 #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
 
+#define USB_VENDOR_ID_GAMERON		0x0810
+#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR	0x0001
+
 #define USB_VENDOR_ID_GLAB		0x06c2
 #define USB_DEVICE_ID_4_PHIDGETSERVO_30	0x0038
 #define USB_DEVICE_ID_1_PHIDGETSERVO_30	0x0039
@@ -196,8 +199,10 @@
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
 #define USB_DEVICE_ID_LOGITECH_WHEEL	0xc294
+#define USB_DEVICE_ID_LOGITECH_KBD	0xc311
 #define USB_DEVICE_ID_S510_RECEIVER	0xc50c
 #define USB_DEVICE_ID_S510_RECEIVER_2	0xc517
+#define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500	0xc512
 #define USB_DEVICE_ID_MX3000_RECEIVER	0xc513
 #define USB_DEVICE_ID_DINOVO_EDGE	0xc714
 
@@ -209,6 +214,13 @@
 #define USB_DEVICE_ID_MGE_UPS		0xffff
 #define USB_DEVICE_ID_MGE_UPS1		0x0001
 
+#define USB_VENDOR_ID_MICROSOFT		0x045e
+#define USB_DEVICE_ID_SIDEWINDER_GV	0x003b
+
+#define USB_VENDOR_ID_NCR		0x0404
+#define USB_DEVICE_ID_NCR_FIRST		0x0300
+#define USB_DEVICE_ID_NCR_LAST		0x03ff
+
 #define USB_VENDOR_ID_NEC		0x073e
 #define USB_DEVICE_ID_NEC_USB_GAME_PAD	0x0301
 
@@ -220,6 +232,9 @@
 #define USB_VENDOR_ID_PANTHERLORD	0x0810
 #define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK	0x0001
 
+#define USB_VENDOR_ID_PETALYNX		0x18b1
+#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE	0x0037
+
 #define USB_VENDOR_ID_PLAYDOTCOM	0x0b43
 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII	0x0003
 
@@ -278,6 +293,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
+	{ USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
@@ -285,11 +301,10 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
 	
-	{ USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
-
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
 
 	{ USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM, HID_QUIRK_HIDDEV },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV, HID_QUIRK_HIDINPUT },
 
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_01, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_10, HID_QUIRK_IGNORE },
@@ -409,9 +424,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
 
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_LOGITECH_DESCRIPTOR },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
 
@@ -426,6 +439,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
@@ -448,9 +462,28 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 
 	{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD, HID_QUIRK_RESET_LEDS },
 
-	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_SWAPPED_MIN_MAX },
-	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_SWAPPED_MIN_MAX },
+	{ 0, 0 }
+};
+
+/* Quirks for devices which require report descriptor fixup go here */
+static const struct hid_rdesc_blacklist {
+	__u16 idVendor;
+	__u16 idProduct;
+	__u32 quirks;
+} hid_rdesc_blacklist[] = {
+
+	{ USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_RDESC_CYMOTION },
+
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_RDESC_LOGITECH },
+
+	{ USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_RDESC_PETALYNX },
+
+	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
+	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
 
 	{ 0, 0 }
 };
@@ -493,7 +526,7 @@ static struct hid_blacklist *usbhid_exists_dquirk(const u16 idVendor,
 	}
 
 	if (bl_entry != NULL)
-		dbg("Found dynamic quirk 0x%x for USB HID vendor 0x%hx prod 0x%hx\n",
+		dbg_hid("Found dynamic quirk 0x%x for USB HID vendor 0x%hx prod 0x%hx\n",
 				bl_entry->quirks, bl_entry->idVendor,
 				bl_entry->idProduct);
 
@@ -521,13 +554,13 @@ int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct,
 	int list_edited = 0;
 
 	if (!idVendor) {
-		dbg("Cannot add a quirk with idVendor = 0");
+		dbg_hid("Cannot add a quirk with idVendor = 0\n");
 		return -EINVAL;
 	}
 
 	q_new = kmalloc(sizeof(struct quirks_list_struct), GFP_KERNEL);
 	if (!q_new) {
-		dbg("Could not allocate quirks_list_struct");
+		dbg_hid("Could not allocate quirks_list_struct\n");
 		return -ENOMEM;
 	}
 
@@ -559,7 +592,6 @@ int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct,
 	return 0;
 }
 
-
 /**
  * usbhid_remove_all_dquirks: remove all runtime HID quirks from memory
  *
@@ -643,7 +675,7 @@ static const struct hid_blacklist *usbhid_exists_squirk(const u16 idVendor,
 			bl_entry = &hid_blacklist[n];
 
 	if (bl_entry != NULL)
-		dbg("Found squirk 0x%x for USB HID vendor 0x%hx prod 0x%hx\n",
+		dbg_hid("Found squirk 0x%x for USB HID vendor 0x%hx prod 0x%hx\n",
 				bl_entry->quirks, bl_entry->idVendor, 
 				bl_entry->idProduct);
 	return bl_entry;
@@ -675,6 +707,12 @@ u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct)
 				idProduct <= USB_DEVICE_ID_CODEMERCS_IOW_LAST)
 			return HID_QUIRK_IGNORE;
 
+	/* NCR devices must not be queried for reports */
+	if (idVendor == USB_VENDOR_ID_NCR &&
+			idProduct >= USB_DEVICE_ID_NCR_FIRST &&
+			idProduct <= USB_DEVICE_ID_NCR_LAST)
+			return HID_QUIRK_NOGET;
+
 	down_read(&dquirks_rwsem);
 	bl_entry = usbhid_exists_dquirk(idVendor, idProduct);
 	if (!bl_entry)
@@ -686,3 +724,126 @@ u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct)
 	return quirks;
 }
 
+/*
+ * Cherry Cymotion keyboard have an invalid HID report descriptor,
+ * that needs fixing before we can parse it.
+ */
+static void usbhid_fixup_cymotion_descriptor(char *rdesc, int rsize)
+{
+	if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
+		printk(KERN_INFO "Fixing up Cherry Cymotion report descriptor\n");
+		rdesc[11] = rdesc[16] = 0xff;
+		rdesc[12] = rdesc[17] = 0x03;
+	}
+}
+
+
+/*
+ * Certain Logitech keyboards send in report #3 keys which are far
+ * above the logical maximum described in descriptor. This extends
+ * the original value of 0x28c of logical maximum to 0x104d
+ */
+static void usbhid_fixup_logitech_descriptor(unsigned char *rdesc, int rsize)
+{
+	if (rsize >= 90 && rdesc[83] == 0x26
+			&& rdesc[84] == 0x8c
+			&& rdesc[85] == 0x02) {
+		printk(KERN_INFO "Fixing up Logitech keyboard report descriptor\n");
+		rdesc[84] = rdesc[89] = 0x4d;
+		rdesc[85] = rdesc[90] = 0x10;
+	}
+}
+
+/* Petalynx Maxter Remote has maximum for consumer page set too low */
+static void usbhid_fixup_petalynx_descriptor(unsigned char *rdesc, int rsize)
+{
+	if (rsize >= 60 && rdesc[39] == 0x2a
+			&& rdesc[40] == 0xf5
+			&& rdesc[41] == 0x00
+			&& rdesc[59] == 0x26
+			&& rdesc[60] == 0xf9
+			&& rdesc[61] == 0x00) {
+		printk(KERN_INFO "Fixing up Petalynx Maxter Remote report descriptor\n");
+		rdesc[60] = 0xfa;
+		rdesc[40] = 0xfa;
+	}
+}
+
+/*
+ * Some USB barcode readers from cypress have usage min and usage max in
+ * the wrong order
+ */
+static void usbhid_fixup_cypress_descriptor(unsigned char *rdesc, int rsize)
+{
+	short fixed = 0;
+	int i;
+
+	for (i = 0; i < rsize - 4; i++) {
+		if (rdesc[i] == 0x29 && rdesc [i+2] == 0x19) {
+			unsigned char tmp;
+
+			rdesc[i] = 0x19; rdesc[i+2] = 0x29;
+			tmp = rdesc[i+3];
+			rdesc[i+3] = rdesc[i+1];
+			rdesc[i+1] = tmp;
+		}
+	}
+
+	if (fixed)
+		printk(KERN_INFO "Fixing up Cypress report descriptor\n");
+}
+
+
+static void __usbhid_fixup_report_descriptor(__u32 quirks, char *rdesc, unsigned rsize)
+{
+	if ((quirks & HID_QUIRK_RDESC_CYMOTION))
+		usbhid_fixup_cymotion_descriptor(rdesc, rsize);
+
+	if (quirks & HID_QUIRK_RDESC_LOGITECH)
+		usbhid_fixup_logitech_descriptor(rdesc, rsize);
+
+	if (quirks & HID_QUIRK_RDESC_SWAPPED_MIN_MAX)
+		usbhid_fixup_cypress_descriptor(rdesc, rsize);
+
+	if (quirks & HID_QUIRK_RDESC_PETALYNX)
+		usbhid_fixup_petalynx_descriptor(rdesc, rsize);
+}
+
+/**
+ * usbhid_fixup_report_descriptor: check if report descriptor needs fixup
+ *
+ * Description:
+ *	Walks the hid_rdesc_blacklist[] array and checks whether the device
+ *	is known to have broken report descriptor that needs to be fixed up
+ *	prior to entering the HID parser
+ *
+ * Returns: nothing
+ */
+void usbhid_fixup_report_descriptor(const u16 idVendor, const u16 idProduct,
+				    char *rdesc, unsigned rsize, char **quirks_param)
+{
+	int n, m;
+	u16 paramVendor, paramProduct;
+	u32 quirks;
+
+	/* static rdesc quirk entries */
+	for (n = 0; hid_rdesc_blacklist[n].idVendor; n++)
+		if (hid_rdesc_blacklist[n].idVendor == idVendor &&
+				hid_rdesc_blacklist[n].idProduct == idProduct)
+			__usbhid_fixup_report_descriptor(hid_rdesc_blacklist[n].quirks,
+					rdesc, rsize);
+
+	/* runtime rdesc quirk entries handling */
+	for (n = 0; quirks_param[n] && n < MAX_USBHID_BOOT_QUIRKS; n++) {
+		m = sscanf(quirks_param[n], "0x%hx:0x%hx:0x%x",
+				&paramVendor, &paramProduct, &quirks);
+
+		if (m != 3)
+			printk(KERN_WARNING
+				"Could not parse HID quirk module param %s\n",
+				quirks_param[n]);
+		else if (paramVendor == idVendor && paramProduct == idProduct)
+			__usbhid_fixup_report_descriptor(quirks, rdesc, rsize);
+	}
+
+}
diff --git a/drivers/hid/usbhid/hid-tmff.c b/drivers/hid/usbhid/hid-tmff.c
index ab5ba6ef891c..555bb48b4295 100644
--- a/drivers/hid/usbhid/hid-tmff.c
+++ b/drivers/hid/usbhid/hid-tmff.c
@@ -70,7 +70,7 @@ static int hid_tmff_play(struct input_dev *dev, void *data, struct ff_effect *ef
 
 	tmff->rumble->value[0] = left;
 	tmff->rumble->value[1] = right;
-	dbg("(left,right)=(%08x, %08x)", left, right);
+	dbg_hid("(left,right)=(%08x, %08x)\n", left, right);
 	usbhid_submit_report(hid, tmff->report, USB_DIR_OUT);
 
 	return 0;
diff --git a/drivers/hid/usbhid/hid-zpff.c b/drivers/hid/usbhid/hid-zpff.c
index a7fbffcdaf36..5a688274f6a3 100644
--- a/drivers/hid/usbhid/hid-zpff.c
+++ b/drivers/hid/usbhid/hid-zpff.c
@@ -21,10 +21,6 @@
  */
 
 
-/* #define DEBUG */
-
-#define debug(format, arg...) pr_debug("hid-zpff: " format "\n" , ## arg)
-
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
@@ -49,14 +45,14 @@ static int hid_zpff_play(struct input_dev *dev, void *data,
 
 	left = effect->u.rumble.strong_magnitude;
 	right = effect->u.rumble.weak_magnitude;
-	debug("called with 0x%04x 0x%04x", left, right);
+	dbg_hid("called with 0x%04x 0x%04x\n", left, right);
 
 	left = left * 0x7f / 0xffff;
 	right = right * 0x7f / 0xffff;
 
 	zpff->report->field[2]->value[0] = left;
 	zpff->report->field[3]->value[0] = right;
-	debug("running with 0x%02x 0x%02x", left, right);
+	dbg_hid("running with 0x%02x 0x%02x\n", left, right);
 	usbhid_submit_report(hid, zpff->report, USB_DIR_OUT);
 
 	return 0;
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 488d61bdbf2c..e793127f971e 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -779,7 +779,7 @@ int hiddev_connect(struct hid_device *hid)
 
 	retval = usb_register_dev(usbhid->intf, &hiddev_class);
 	if (retval) {
-		err("Not able to get a minor for this device.");
+		err_hid("Not able to get a minor for this device.");
 		kfree(hiddev);
 		return -1;
 	}
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index 130978780713..b76b02f7b52d 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -125,7 +125,7 @@ static void usb_kbd_irq(struct urb *urb)
 resubmit:
 	i = usb_submit_urb (urb, GFP_ATOMIC);
 	if (i)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
+		err_hid ("can't resubmit intr, %s-%s/input0, status %d",
 				kbd->usbdev->bus->bus_name,
 				kbd->usbdev->devpath, i);
 }
@@ -151,7 +151,7 @@ static int usb_kbd_event(struct input_dev *dev, unsigned int type,
 	*(kbd->leds) = kbd->newleds;
 	kbd->led->dev = kbd->usbdev;
 	if (usb_submit_urb(kbd->led, GFP_ATOMIC))
-		err("usb_submit_urb(leds) failed");
+		err_hid("usb_submit_urb(leds) failed");
 
 	return 0;
 }
@@ -169,7 +169,7 @@ static void usb_kbd_led(struct urb *urb)
 	*(kbd->leds) = kbd->newleds;
 	kbd->led->dev = kbd->usbdev;
 	if (usb_submit_urb(kbd->led, GFP_ATOMIC))
-		err("usb_submit_urb(leds) failed");
+		err_hid("usb_submit_urb(leds) failed");
 }
 
 static int usb_kbd_open(struct input_dev *dev)
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 58899078810b..014dfa575be7 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -34,10 +34,6 @@ config I2C_ALGOPCA
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-algo-pca.
 
-config I2C_ALGO8XX
-	tristate "MPC8xx CPM I2C interface"
-	depends on 8xx
-
 config I2C_ALGO_SGI
 	tristate "I2C SGI interfaces"
 	depends on SGI_IP22 || SGI_IP32 || X86_VISWS
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 838dc1c19d61..fcde9bab5b96 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -207,6 +207,7 @@ config I2C_PIIX4
 	    ATI IXP300
 	    ATI IXP400
 	    ATI SB600
+	    ATI SB700
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
@@ -390,11 +391,6 @@ config I2C_PROSAVAGE
 	  This support is also available as a module.  If so, the module 
 	  will be called i2c-prosavage.
 
-config I2C_RPXLITE
-	tristate "Embedded Planet RPX Lite/Classic support"
-	depends on RPXLITE || RPXCLASSIC
-	select I2C_ALGO8XX
-
 config I2C_S3C2410
 	tristate "S3C2410 I2C Driver"
 	depends on ARCH_S3C2410
@@ -512,6 +508,22 @@ config I2C_SIS96X
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-sis96x.
 
+config I2C_TAOS_EVM
+	tristate "TAOS evaluation module"
+	depends on EXPERIMENTAL
+	select SERIO
+	select SERIO_SERPORT
+	default n
+	help
+	  This supports TAOS evaluation modules on serial port. In order to
+	  use this driver, you will need the inputattach tool, which is part
+	  of the input-utils package.
+
+	  If unsure, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-taos-evm.
+
 config I2C_STUB
 	tristate "I2C/SMBus Test Stub"
 	depends on EXPERIMENTAL && m
@@ -635,4 +647,13 @@ config I2C_PNX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pnx.
 
+config I2C_PMCMSP
+	tristate "PMC MSP I2C TWI Controller"
+	depends on PMC_MSP
+	help
+	  This driver supports the PMC TWI controller on MSP devices.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-pmcmsp.
+
 endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 14d1432f698b..a6db4e38bda8 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -32,10 +32,10 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
 obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
+obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
 obj-$(CONFIG_I2C_PROSAVAGE)	+= i2c-prosavage.o
 obj-$(CONFIG_I2C_PXA)		+= i2c-pxa.o
-obj-$(CONFIG_I2C_RPXLITE)	+= i2c-rpx.o
 obj-$(CONFIG_I2C_S3C2410)	+= i2c-s3c2410.o
 obj-$(CONFIG_I2C_SAVAGE4)	+= i2c-savage4.o
 obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
@@ -44,6 +44,7 @@ obj-$(CONFIG_I2C_SIS5595)	+= i2c-sis5595.o
 obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
 obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
 obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
+obj-$(CONFIG_I2C_TAOS_EVM)	+= i2c-taos-evm.o
 obj-$(CONFIG_I2C_TINY_USB)	+= i2c-tiny-usb.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
 obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index a7dd54654a9a..025f19423faf 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -63,14 +63,14 @@ static void i2c_gpio_setscl_val(void *data, int state)
 	gpio_set_value(pdata->scl_pin, state);
 }
 
-int i2c_gpio_getsda(void *data)
+static int i2c_gpio_getsda(void *data)
 {
 	struct i2c_gpio_platform_data *pdata = data;
 
 	return gpio_get_value(pdata->sda_pin);
 }
 
-int i2c_gpio_getscl(void *data)
+static int i2c_gpio_getscl(void *data)
 {
 	struct i2c_gpio_platform_data *pdata = data;
 
@@ -142,7 +142,13 @@ static int __init i2c_gpio_probe(struct platform_device *pdev)
 	adap->algo_data = bit_data;
 	adap->dev.parent = &pdev->dev;
 
-	ret = i2c_bit_add_bus(adap);
+	/*
+	 * If "dev->id" is negative we consider it as zero.
+	 * The reason to do so is to avoid sysfs names that only make
+	 * sense when there are multiple adapters.
+	 */
+	adap->nr = pdev->id >= 0 ? pdev->id : 0;
+	ret = i2c_bit_add_numbered_bus(adap);
 	if (ret)
 		goto err_add_bus;
 
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 611b57192c96..8f5c686123b8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -22,12 +22,12 @@
 
 /*
     SUPPORTED DEVICES	PCI ID
-    82801AA		2413           
-    82801AB		2423           
-    82801BA		2443           
-    82801CA/CAM		2483           
-    82801DB		24C3   (HW PEC supported, 32 byte buffer not supported)
-    82801EB		24D3   (HW PEC supported, 32 byte buffer not supported)
+    82801AA		2413
+    82801AB		2423
+    82801BA		2443
+    82801CA/CAM		2483
+    82801DB		24C3   (HW PEC supported)
+    82801EB		24D3   (HW PEC supported)
     6300ESB		25A4
     ICH6		266A
     ICH7		27DA
@@ -74,6 +74,13 @@
 #define SMBHSTCFG_SMB_SMI_EN	2
 #define SMBHSTCFG_I2C_EN	4
 
+/* Auxillary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC		1
+#define SMBAUXCTL_E32B		2
+
+/* kill bit for SMBHSTCNT */
+#define SMBHSTCNT_KILL		2
+
 /* Other settings */
 #define MAX_TIMEOUT		100
 #define ENABLE_INT9		0	/* set to 0x01 to enable - untested */
@@ -91,10 +98,15 @@
 #define I801_START		0x40
 #define I801_PEC_EN		0x80	/* ICH4 only */
 
-
-static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
-				  int command, int hwpec);
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE	0x80
+#define SMBHSTSTS_INUSE_STS	0x40
+#define SMBHSTSTS_SMBALERT_STS	0x20
+#define SMBHSTSTS_FAILED	0x10
+#define SMBHSTSTS_BUS_ERR	0x08
+#define SMBHSTSTS_DEV_ERR	0x04
+#define SMBHSTSTS_INTR		0x02
+#define SMBHSTSTS_HOST_BUSY	0x01
 
 static unsigned long i801_smba;
 static unsigned char i801_original_hstcfg;
@@ -102,7 +114,7 @@ static struct pci_driver i801_driver;
 static struct pci_dev *I801_dev;
 static int isich4;
 
-static int i801_transaction(void)
+static int i801_transaction(int xact)
 {
 	int temp;
 	int result = 0;
@@ -127,33 +139,40 @@ static int i801_transaction(void)
 		}
 	}
 
-	outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+	/* the current contents of SMBHSTCNT can be overwritten, since PEC,
+	 * INTREN, SMBSCMD are passed in xact */
+	outb_p(xact | I801_START, SMBHSTCNT);
 
 	/* We will always wait for a fraction of a second! */
 	do {
 		msleep(1);
 		temp = inb_p(SMBHSTSTS);
-	} while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+	} while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
 
 	/* If the SMBus is still busy, we give up */
 	if (timeout >= MAX_TIMEOUT) {
 		dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
 		result = -1;
+		/* try to stop the current command */
+		dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
+		outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+		msleep(1);
+		outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
 	}
 
-	if (temp & 0x10) {
+	if (temp & SMBHSTSTS_FAILED) {
 		result = -1;
 		dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
 	}
 
-	if (temp & 0x08) {
+	if (temp & SMBHSTSTS_BUS_ERR) {
 		result = -1;
 		dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
 			"until next hard reset. (sorry!)\n");
 		/* Clock stops and slave is stuck in mid-transmission */
 	}
 
-	if (temp & 0x04) {
+	if (temp & SMBHSTSTS_DEV_ERR) {
 		result = -1;
 		dev_dbg(&I801_dev->dev, "Error: no response!\n");
 	}
@@ -172,44 +191,70 @@ static int i801_transaction(void)
 	return result;
 }
 
-/* All-inclusive block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
-				  int command, int hwpec)
+/* wait for INTR bit as advised by Intel */
+static void i801_wait_hwpec(void)
+{
+	int timeout = 0;
+	int temp;
+
+	do {
+		msleep(1);
+		temp = inb_p(SMBHSTSTS);
+	} while ((!(temp & SMBHSTSTS_INTR))
+		 && (timeout++ < MAX_TIMEOUT));
+
+	if (timeout >= MAX_TIMEOUT) {
+		dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+	}
+	outb_p(temp, SMBHSTSTS);
+}
+
+static int i801_block_transaction_by_block(union i2c_smbus_data *data,
+					   char read_write, int hwpec)
+{
+	int i, len;
+
+	inb_p(SMBHSTCNT); /* reset the data buffer index */
+
+	/* Use 32-byte buffer to process this transaction */
+	if (read_write == I2C_SMBUS_WRITE) {
+		len = data->block[0];
+		outb_p(len, SMBHSTDAT0);
+		for (i = 0; i < len; i++)
+			outb_p(data->block[i+1], SMBBLKDAT);
+	}
+
+	if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+			     I801_PEC_EN * hwpec))
+		return -1;
+
+	if (read_write == I2C_SMBUS_READ) {
+		len = inb_p(SMBHSTDAT0);
+		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+			return -1;
+
+		data->block[0] = len;
+		for (i = 0; i < len; i++)
+			data->block[i + 1] = inb_p(SMBBLKDAT);
+	}
+	return 0;
+}
+
+static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
+					       char read_write, int hwpec)
 {
 	int i, len;
 	int smbcmd;
 	int temp;
 	int result = 0;
 	int timeout;
-	unsigned char hostc, errmask;
+	unsigned char errmask;
 
-	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
-		if (read_write == I2C_SMBUS_WRITE) {
-			/* set I2C_EN bit in configuration register */
-			pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
-			pci_write_config_byte(I801_dev, SMBHSTCFG,
-					      hostc | SMBHSTCFG_I2C_EN);
-		} else {
-			dev_err(&I801_dev->dev,
-				"I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
-			return -1;
-		}
-	}
+	len = data->block[0];
 
 	if (read_write == I2C_SMBUS_WRITE) {
-		len = data->block[0];
-		if (len < 1)
-			len = 1;
-		if (len > 32)
-			len = 32;
 		outb_p(len, SMBHSTDAT0);
 		outb_p(data->block[1], SMBBLKDAT);
-	} else {
-		len = 32;	/* max for reads */
-	}
-
-	if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
-		/* set 32 byte buffer */
 	}
 
 	for (i = 1; i <= len; i++) {
@@ -227,13 +272,13 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 		/* Make sure the SMBus host is ready to start transmitting */
 		temp = inb_p(SMBHSTSTS);
 		if (i == 1) {
-			/* Erronenous conditions before transaction: 
+			/* Erronenous conditions before transaction:
 			 * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
-			errmask=0x9f; 
+			errmask = 0x9f;
 		} else {
-			/* Erronenous conditions during transaction: 
+			/* Erronenous conditions during transaction:
 			 * Failed, Bus_Err, Dev_Err, Intr */
-			errmask=0x1e; 
+			errmask = 0x1e;
 		}
 		if (temp & errmask) {
 			dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
@@ -242,14 +287,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 			if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
 				dev_err(&I801_dev->dev,
 					"Reset failed! (%02x)\n", temp);
-				result = -1;
-                                goto END;
+				return -1;
 			}
-			if (i != 1) {
+			if (i != 1)
 				/* if die in middle of block transaction, fail */
-				result = -1;
-				goto END;
-			}
+				return -1;
 		}
 
 		if (i == 1)
@@ -261,33 +303,38 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 			msleep(1);
 			temp = inb_p(SMBHSTSTS);
 		}
-		    while ((!(temp & 0x80))
-			   && (timeout++ < MAX_TIMEOUT));
+		while ((!(temp & SMBHSTSTS_BYTE_DONE))
+		       && (timeout++ < MAX_TIMEOUT));
 
 		/* If the SMBus is still busy, we give up */
 		if (timeout >= MAX_TIMEOUT) {
+			/* try to stop the current command */
+			dev_dbg(&I801_dev->dev, "Terminating the current "
+						"operation\n");
+			outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+			msleep(1);
+			outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
+				SMBHSTCNT);
 			result = -1;
 			dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
 		}
 
-		if (temp & 0x10) {
+		if (temp & SMBHSTSTS_FAILED) {
 			result = -1;
 			dev_dbg(&I801_dev->dev,
 				"Error: Failed bus transaction\n");
-		} else if (temp & 0x08) {
+		} else if (temp & SMBHSTSTS_BUS_ERR) {
 			result = -1;
 			dev_err(&I801_dev->dev, "Bus collision!\n");
-		} else if (temp & 0x04) {
+		} else if (temp & SMBHSTSTS_DEV_ERR) {
 			result = -1;
 			dev_dbg(&I801_dev->dev, "Error: no response!\n");
 		}
 
 		if (i == 1 && read_write == I2C_SMBUS_READ) {
 			len = inb_p(SMBHSTDAT0);
-			if (len < 1)
-				len = 1;
-			if (len > 32)
-				len = 32;
+			if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+				return -1;
 			data->block[0] = len;
 		}
 
@@ -310,25 +357,58 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
 			inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
 
 		if (result < 0)
-			goto END;
+			return result;
 	}
+	return result;
+}
 
-	if (hwpec) {
-		/* wait for INTR bit as advised by Intel */
-		timeout = 0;
-		do {
-			msleep(1);
-			temp = inb_p(SMBHSTSTS);
-		} while ((!(temp & 0x02))
-			   && (timeout++ < MAX_TIMEOUT));
+static int i801_set_block_buffer_mode(void)
+{
+	outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
+	if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
+		return -1;
+	return 0;
+}
 
-		if (timeout >= MAX_TIMEOUT) {
-			dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+/* Block transaction function */
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+				  int command, int hwpec)
+{
+	int result = 0;
+	unsigned char hostc;
+
+	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+		if (read_write == I2C_SMBUS_WRITE) {
+			/* set I2C_EN bit in configuration register */
+			pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
+			pci_write_config_byte(I801_dev, SMBHSTCFG,
+					      hostc | SMBHSTCFG_I2C_EN);
+		} else {
+			dev_err(&I801_dev->dev,
+				"I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
+			return -1;
 		}
-		outb_p(temp, SMBHSTSTS); 
 	}
-	result = 0;
-END:
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		if (data->block[0] < 1)
+			data->block[0] = 1;
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+			data->block[0] = I2C_SMBUS_BLOCK_MAX;
+	} else {
+		data->block[0] = 32;	/* max for reads */
+	}
+
+	if (isich4 && i801_set_block_buffer_mode() == 0 )
+		result = i801_block_transaction_by_block(data, read_write,
+							 hwpec);
+	else
+		result = i801_block_transaction_byte_by_byte(data, read_write,
+							     hwpec);
+
+	if (result == 0 && hwpec)
+		i801_wait_hwpec();
+
 	if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
 		/* restore saved configuration register value */
 		pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
@@ -393,19 +473,22 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		return -1;
 	}
 
-	outb_p(hwpec, SMBAUXCTL);	/* enable/disable hardware PEC */
+	if (hwpec)	/* enable/disable hardware PEC */
+		outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
+	else
+		outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
 
 	if(block)
 		ret = i801_block_transaction(data, read_write, size, hwpec);
-	else {
-		outb_p(xact | ENABLE_INT9, SMBHSTCNT);
-		ret = i801_transaction();
-	}
+	else
+		ret = i801_transaction(xact | ENABLE_INT9);
 
 	/* Some BIOSes don't like it when PEC is enabled at reboot or resume
-	   time, so we forcibly disable it after every transaction. */
+	   time, so we forcibly disable it after every transaction. Turn off
+	   E32B for the same reason. */
 	if (hwpec)
-		outb_p(0, SMBAUXCTL);
+		outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
+		       SMBAUXCTL);
 
 	if(block)
 		return ret;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 90e2d9350c1b..440342bc62e1 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -491,6 +491,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	new_adapter->id = I2C_HW_IOP3XX;
 	new_adapter->owner = THIS_MODULE;
 	new_adapter->dev.parent = &pdev->dev;
+	new_adapter->nr = pdev->id;
 
 	/*
 	 * Default values...should these come in from board code?
@@ -508,7 +509,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, new_adapter);
 	new_adapter->algo_data = adapter_data;
 
-	i2c_add_adapter(new_adapter);
+	i2c_add_numbered_adapter(new_adapter);
 
 	return 0;
 
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index c6b6898592b1..851c3ed513d0 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -74,6 +74,25 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
+ * the bus, because it wants to send ACK.
+ * Following sequence of enabling/disabling and sending start/stop generates
+ * the pulse, so it's all OK.
+ */
+static void mpc_i2c_fixup(struct mpc_i2c *i2c)
+{
+	writeccr(i2c, 0);
+	udelay(30);
+	writeccr(i2c, CCR_MEN);
+	udelay(30);
+	writeccr(i2c, CCR_MSTA | CCR_MTX);
+	udelay(30);
+	writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+	udelay(30);
+	writeccr(i2c, CCR_MEN);
+	udelay(30);
+}
+
 static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 {
 	unsigned long orig_jiffies = jiffies;
@@ -153,6 +172,7 @@ static void mpc_i2c_start(struct mpc_i2c *i2c)
 static void mpc_i2c_stop(struct mpc_i2c *i2c)
 {
 	writeccr(i2c, CCR_MEN);
+	writeccr(i2c, 0);
 }
 
 static int mpc_write(struct mpc_i2c *i2c, int target,
@@ -245,6 +265,9 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 		}
 		if (time_after(jiffies, orig_jiffies + HZ)) {
 			pr_debug("I2C: timeout\n");
+			if (readb(i2c->base + MPC_I2C_SR) ==
+			    (CSR_MCF | CSR_MBB | CSR_RXAK))
+				mpc_i2c_fixup(i2c);
 			return -EIO;
 		}
 		schedule();
@@ -327,9 +350,10 @@ static int fsl_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, i2c);
 
 	i2c->adap = mpc_ops;
+	i2c->adap.nr = pdev->id;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
-	if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+	if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
 		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
 		goto fail_add;
 	}
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index a55b3335d1be..251154ae5d97 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,6 +527,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 	drv_data->adapter.class = I2C_CLASS_HWMON;
 	drv_data->adapter.timeout = pdata->timeout;
 	drv_data->adapter.retries = pdata->retries;
+	drv_data->adapter.nr = pd->id;
 	platform_set_drvdata(pd, drv_data);
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
 
@@ -539,7 +540,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 			drv_data->irq);
 		rc = -EINVAL;
 		goto exit_unmap_regs;
-	} else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) {
+	} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
 		dev_err(&drv_data->adapter.dev,
 			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
 		goto exit_free_irq;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3cd0d63e7b50..c48140f782d0 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -61,6 +61,7 @@ struct nforce2_smbus {
 	struct i2c_adapter adapter;
 	int base;
 	int size;
+	int blockops;
 };
 
 
@@ -80,6 +81,8 @@ struct nforce2_smbus {
 #define NVIDIA_SMB_ADDR		(smbus->base + 0x02)	/* address */
 #define NVIDIA_SMB_CMD		(smbus->base + 0x03)	/* command */
 #define NVIDIA_SMB_DATA		(smbus->base + 0x04)	/* 32 data registers */
+#define NVIDIA_SMB_BCNT		(smbus->base + 0x24)	/* number of data
+							   bytes */
 
 #define NVIDIA_SMB_STS_DONE	0x80
 #define NVIDIA_SMB_STS_ALRM	0x40
@@ -92,6 +95,7 @@ struct nforce2_smbus {
 #define NVIDIA_SMB_PRTCL_BYTE			0x04
 #define NVIDIA_SMB_PRTCL_BYTE_DATA		0x06
 #define NVIDIA_SMB_PRTCL_WORD_DATA		0x08
+#define NVIDIA_SMB_PRTCL_BLOCK_DATA		0x0a
 #define NVIDIA_SMB_PRTCL_PEC			0x80
 
 static struct pci_driver nforce2_driver;
@@ -103,6 +107,8 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 {
 	struct nforce2_smbus *smbus = adap->algo_data;
 	unsigned char protocol, pec, temp;
+	u8 len;
+	int i;
 
 	protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
 		NVIDIA_SMB_PRTCL_WRITE;
@@ -137,6 +143,25 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 			protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
 			break;
 
+		case I2C_SMBUS_BLOCK_DATA:
+			outb_p(command, NVIDIA_SMB_CMD);
+			if (read_write == I2C_SMBUS_WRITE) {
+				len = data->block[0];
+				if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+					dev_err(&adap->dev,
+						"Transaction failed "
+						"(requested block size: %d)\n",
+						len);
+					return -1;
+				}
+				outb_p(len, NVIDIA_SMB_BCNT);
+				for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
+					outb_p(data->block[i + 1],
+					       NVIDIA_SMB_DATA+i);
+			}
+			protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
+			break;
+
 		default:
 			dev_err(&adap->dev, "Unsupported transaction %d\n", size);
 			return -1;
@@ -174,6 +199,14 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 		case I2C_SMBUS_WORD_DATA:
 			data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
 			break;
+
+		case I2C_SMBUS_BLOCK_DATA:
+			len = inb_p(NVIDIA_SMB_BCNT);
+			len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+			for (i = 0; i < len; i++)
+				data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
+			data->block[0] = len;
+			break;
 	}
 
 	return 0;
@@ -184,7 +217,9 @@ static u32 nforce2_func(struct i2c_adapter *adapter)
 {
 	/* other functionality might be possible, but is not tested */
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       (((struct nforce2_smbus*)adapter->algo_data)->blockops ?
+		I2C_FUNC_SMBUS_BLOCK_DATA : 0);
 }
 
 static struct i2c_algorithm smbus_algorithm = {
@@ -268,6 +303,13 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
 		return -ENOMEM;
 	pci_set_drvdata(dev, smbuses);
 
+	switch(dev->device) {
+	case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS:
+	case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS:
+		smbuses[0].blockops = 1;
+		smbuses[1].blockops = 1;
+	}
+
 	/* SMBus adapter 1 */
 	res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
 	if (res1 < 0) {
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 5a52bf5e3fb0..debc76cd2161 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -23,7 +23,7 @@
    Supports:
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000
-	ATI IXP200, IXP300, IXP400, SB600
+	ATI IXP200, IXP300, IXP400, SB600, SB700
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
@@ -399,6 +399,8 @@ static struct pci_device_id piix4_ids[] = {
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS),
 	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SMBUS),
+	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
new file mode 100644
index 000000000000..03188d277af1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -0,0 +1,653 @@
+/*
+ * Specific bus support for PMC-TWI compliant implementation on MSP71xx.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#define DRV_NAME	"pmcmsptwi"
+
+#define MSP_TWI_SF_CLK_REG_OFFSET	0x00
+#define MSP_TWI_HS_CLK_REG_OFFSET	0x04
+#define MSP_TWI_CFG_REG_OFFSET		0x08
+#define MSP_TWI_CMD_REG_OFFSET		0x0c
+#define MSP_TWI_ADD_REG_OFFSET		0x10
+#define MSP_TWI_DAT_0_REG_OFFSET	0x14
+#define MSP_TWI_DAT_1_REG_OFFSET	0x18
+#define MSP_TWI_INT_STS_REG_OFFSET	0x1c
+#define MSP_TWI_INT_MSK_REG_OFFSET	0x20
+#define MSP_TWI_BUSY_REG_OFFSET		0x24
+
+#define MSP_TWI_INT_STS_DONE			(1 << 0)
+#define MSP_TWI_INT_STS_LOST_ARBITRATION	(1 << 1)
+#define MSP_TWI_INT_STS_NO_RESPONSE		(1 << 2)
+#define MSP_TWI_INT_STS_DATA_COLLISION		(1 << 3)
+#define MSP_TWI_INT_STS_BUSY			(1 << 4)
+#define MSP_TWI_INT_STS_ALL			0x1f
+
+#define MSP_MAX_BYTES_PER_RW		8
+#define MSP_MAX_POLL			5
+#define MSP_POLL_DELAY			10
+#define MSP_IRQ_TIMEOUT			(MSP_MAX_POLL * MSP_POLL_DELAY)
+
+/* IO Operation macros */
+#define pmcmsptwi_readl		__raw_readl
+#define pmcmsptwi_writel	__raw_writel
+
+/* TWI command type */
+enum pmcmsptwi_cmd_type {
+	MSP_TWI_CMD_WRITE	= 0,	/* Write only */
+	MSP_TWI_CMD_READ	= 1,	/* Read only */
+	MSP_TWI_CMD_WRITE_READ	= 2,	/* Write then Read */
+};
+
+/* The possible results of the xferCmd */
+enum pmcmsptwi_xfer_result {
+	MSP_TWI_XFER_OK	= 0,
+	MSP_TWI_XFER_TIMEOUT,
+	MSP_TWI_XFER_BUSY,
+	MSP_TWI_XFER_DATA_COLLISION,
+	MSP_TWI_XFER_NO_RESPONSE,
+	MSP_TWI_XFER_LOST_ARBITRATION,
+};
+
+/* Corresponds to a PMCTWI clock configuration register */
+struct pmcmsptwi_clock {
+	u8 filter;	/* Bits 15:12,	default = 0x03 */
+	u16 clock;	/* Bits 9:0,	default = 0x001f */
+};
+
+struct pmcmsptwi_clockcfg {
+	struct pmcmsptwi_clock standard;  /* The standard/fast clock config */
+	struct pmcmsptwi_clock highspeed; /* The highspeed clock config */
+};
+
+/* Corresponds to the main TWI configuration register */
+struct pmcmsptwi_cfg {
+	u8 arbf;	/* Bits 15:12,	default=0x03 */
+	u8 nak;		/* Bits 11:8,	default=0x03 */
+	u8 add10;	/* Bit 7,	default=0x00 */
+	u8 mst_code;	/* Bits 6:4,	default=0x00 */
+	u8 arb;		/* Bit 1,	default=0x01 */
+	u8 highspeed;	/* Bit 0,	default=0x00 */
+};
+
+/* A single pmctwi command to issue */
+struct pmcmsptwi_cmd {
+	u16 addr;	/* The slave address (7 or 10 bits) */
+	enum pmcmsptwi_cmd_type type;	/* The command type */
+	u8 write_len;	/* Number of bytes in the write buffer */
+	u8 read_len;	/* Number of bytes in the read buffer */
+	u8 *write_data;	/* Buffer of characters to send */
+	u8 *read_data;	/* Buffer to fill with incoming data */
+};
+
+/* The private data */
+struct pmcmsptwi_data {
+	void __iomem *iobase;			/* iomapped base for IO */
+	int irq;				/* IRQ to use (0 disables) */
+	struct completion wait;			/* Completion for xfer */
+	struct mutex lock;			/* Used for threadsafeness */
+	enum pmcmsptwi_xfer_result last_result;	/* result of last xfer */
+};
+
+/* The default settings */
+const static struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
+	.standard = {
+		.filter	= 0x3,
+		.clock	= 0x1f,
+	},
+	.highspeed = {
+		.filter	= 0x3,
+		.clock	= 0x1f,
+	},
+};
+
+const static struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
+	.arbf		= 0x03,
+	.nak		= 0x03,
+	.add10		= 0x00,
+	.mst_code	= 0x00,
+	.arb		= 0x01,
+	.highspeed	= 0x00,
+};
+
+static struct pmcmsptwi_data pmcmsptwi_data;
+
+static struct i2c_adapter pmcmsptwi_adapter;
+
+/* inline helper functions */
+static inline u32 pmcmsptwi_clock_to_reg(
+			const struct pmcmsptwi_clock *clock)
+{
+	return ((clock->filter & 0xf) << 12) | (clock->clock & 0x03ff);
+}
+
+static inline void pmcmsptwi_reg_to_clock(
+			u32 reg, struct pmcmsptwi_clock *clock)
+{
+	clock->filter = (reg >> 12) & 0xf;
+	clock->clock = reg & 0x03ff;
+}
+
+static inline u32 pmcmsptwi_cfg_to_reg(const struct pmcmsptwi_cfg *cfg)
+{
+	return ((cfg->arbf & 0xf) << 12) |
+		((cfg->nak & 0xf) << 8) |
+		((cfg->add10 & 0x1) << 7) |
+		((cfg->mst_code & 0x7) << 4) |
+		((cfg->arb & 0x1) << 1) |
+		(cfg->highspeed & 0x1);
+}
+
+static inline void pmcmsptwi_reg_to_cfg(u32 reg, struct pmcmsptwi_cfg *cfg)
+{
+	cfg->arbf = (reg >> 12) & 0xf;
+	cfg->nak = (reg >> 8) & 0xf;
+	cfg->add10 = (reg >> 7) & 0x1;
+	cfg->mst_code = (reg >> 4) & 0x7;
+	cfg->arb = (reg >> 1) & 0x1;
+	cfg->highspeed = reg & 0x1;
+}
+
+/*
+ * Sets the current clock configuration
+ */
+static void pmcmsptwi_set_clock_config(const struct pmcmsptwi_clockcfg *cfg,
+					struct pmcmsptwi_data *data)
+{
+	mutex_lock(&data->lock);
+	pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->standard),
+				data->iobase + MSP_TWI_SF_CLK_REG_OFFSET);
+	pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->highspeed),
+				data->iobase + MSP_TWI_HS_CLK_REG_OFFSET);
+	mutex_unlock(&data->lock);
+}
+
+/*
+ * Gets the current TWI bus configuration
+ */
+static void pmcmsptwi_get_twi_config(struct pmcmsptwi_cfg *cfg,
+					struct pmcmsptwi_data *data)
+{
+	mutex_lock(&data->lock);
+	pmcmsptwi_reg_to_cfg(pmcmsptwi_readl(
+				data->iobase + MSP_TWI_CFG_REG_OFFSET), cfg);
+	mutex_unlock(&data->lock);
+}
+
+/*
+ * Sets the current TWI bus configuration
+ */
+static void pmcmsptwi_set_twi_config(const struct pmcmsptwi_cfg *cfg,
+					struct pmcmsptwi_data *data)
+{
+	mutex_lock(&data->lock);
+	pmcmsptwi_writel(pmcmsptwi_cfg_to_reg(cfg),
+				data->iobase + MSP_TWI_CFG_REG_OFFSET);
+	mutex_unlock(&data->lock);
+}
+
+/*
+ * Parses the 'int_sts' register and returns a well-defined error code
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_get_result(u32 reg)
+{
+	if (reg & MSP_TWI_INT_STS_LOST_ARBITRATION) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: Lost arbitration\n");
+		return MSP_TWI_XFER_LOST_ARBITRATION;
+	} else if (reg & MSP_TWI_INT_STS_NO_RESPONSE) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: No response\n");
+		return MSP_TWI_XFER_NO_RESPONSE;
+	} else if (reg & MSP_TWI_INT_STS_DATA_COLLISION) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: Data collision\n");
+		return MSP_TWI_XFER_DATA_COLLISION;
+	} else if (reg & MSP_TWI_INT_STS_BUSY) {
+		dev_dbg(&pmcmsptwi_adapter.dev,
+			"Result: Bus busy\n");
+		return MSP_TWI_XFER_BUSY;
+	}
+
+	dev_dbg(&pmcmsptwi_adapter.dev, "Result: Operation succeeded\n");
+	return MSP_TWI_XFER_OK;
+}
+
+/*
+ * In interrupt mode, handle the interrupt.
+ * NOTE: Assumes data->lock is held.
+ */
+static irqreturn_t pmcmsptwi_interrupt(int irq, void *ptr)
+{
+	struct pmcmsptwi_data *data = ptr;
+
+	u32 reason = pmcmsptwi_readl(data->iobase +
+					MSP_TWI_INT_STS_REG_OFFSET);
+	pmcmsptwi_writel(reason, data->iobase + MSP_TWI_INT_STS_REG_OFFSET);
+
+	dev_dbg(&pmcmsptwi_adapter.dev, "Got interrupt 0x%08x\n", reason);
+	if (!(reason & MSP_TWI_INT_STS_DONE))
+		return IRQ_NONE;
+
+	data->last_result = pmcmsptwi_get_result(reason);
+	complete(&data->wait);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Probe for and register the device and return 0 if there is one.
+ */
+static int __devinit pmcmsptwi_probe(struct platform_device *pldev)
+{
+	struct resource *res;
+	int rc = -ENODEV;
+
+	/* get the static platform resources */
+	res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pldev->dev, "IOMEM resource not found\n");
+		goto ret_err;
+	}
+
+	/* reserve the memory region */
+	if (!request_mem_region(res->start, res->end - res->start + 1,
+				pldev->name)) {
+		dev_err(&pldev->dev,
+			"Unable to get memory/io address region 0x%08x\n",
+			res->start);
+		rc = -EBUSY;
+		goto ret_err;
+	}
+
+	/* remap the memory */
+	pmcmsptwi_data.iobase = ioremap_nocache(res->start,
+						res->end - res->start + 1);
+	if (!pmcmsptwi_data.iobase) {
+		dev_err(&pldev->dev,
+			"Unable to ioremap address 0x%08x\n", res->start);
+		rc = -EIO;
+		goto ret_unreserve;
+	}
+
+	/* request the irq */
+	pmcmsptwi_data.irq = platform_get_irq(pldev, 0);
+	if (pmcmsptwi_data.irq) {
+		rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt,
+			IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+			pldev->name, &pmcmsptwi_data);
+		if (rc == 0) {
+			/*
+			 * Enable 'DONE' interrupt only.
+			 *
+			 * If you enable all interrupts, you will get one on
+			 * error and another when the operation completes.
+			 * This way you only have to handle one interrupt,
+			 * but you can still check all result flags.
+			 */
+			pmcmsptwi_writel(MSP_TWI_INT_STS_DONE,
+					pmcmsptwi_data.iobase +
+					MSP_TWI_INT_MSK_REG_OFFSET);
+		} else {
+			dev_warn(&pldev->dev,
+				"Could not assign TWI IRQ handler "
+				"to irq %d (continuing with poll)\n",
+				pmcmsptwi_data.irq);
+			pmcmsptwi_data.irq = 0;
+		}
+	}
+
+	init_completion(&pmcmsptwi_data.wait);
+	mutex_init(&pmcmsptwi_data.lock);
+
+	pmcmsptwi_set_clock_config(&pmcmsptwi_defclockcfg, &pmcmsptwi_data);
+	pmcmsptwi_set_twi_config(&pmcmsptwi_defcfg, &pmcmsptwi_data);
+
+	printk(KERN_INFO DRV_NAME ": Registering MSP71xx I2C adapter\n");
+
+	pmcmsptwi_adapter.dev.parent = &pldev->dev;
+	platform_set_drvdata(pldev, &pmcmsptwi_adapter);
+	i2c_set_adapdata(&pmcmsptwi_adapter, &pmcmsptwi_data);
+
+	rc = i2c_add_adapter(&pmcmsptwi_adapter);
+	if (rc) {
+		dev_err(&pldev->dev, "Unable to register I2C adapter\n");
+		goto ret_unmap;
+	}
+
+	return 0;
+
+ret_unmap:
+	platform_set_drvdata(pldev, NULL);
+	if (pmcmsptwi_data.irq) {
+		pmcmsptwi_writel(0,
+			pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+		free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+	}
+
+	iounmap(pmcmsptwi_data.iobase);
+
+ret_unreserve:
+	release_mem_region(res->start, res->end - res->start + 1);
+
+ret_err:
+	return rc;
+}
+
+/*
+ * Release the device and return 0 if there is one.
+ */
+static int __devexit pmcmsptwi_remove(struct platform_device *pldev)
+{
+	struct resource *res;
+
+	i2c_del_adapter(&pmcmsptwi_adapter);
+
+	platform_set_drvdata(pldev, NULL);
+	if (pmcmsptwi_data.irq) {
+		pmcmsptwi_writel(0,
+			pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+		free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+	}
+
+	iounmap(pmcmsptwi_data.iobase);
+
+	res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+
+	return 0;
+}
+
+/*
+ * Polls the 'busy' register until the command is complete.
+ * NOTE: Assumes data->lock is held.
+ */
+static void pmcmsptwi_poll_complete(struct pmcmsptwi_data *data)
+{
+	int i;
+
+	for (i = 0; i < MSP_MAX_POLL; i++) {
+		u32 val = pmcmsptwi_readl(data->iobase +
+						MSP_TWI_BUSY_REG_OFFSET);
+		if (val == 0) {
+			u32 reason = pmcmsptwi_readl(data->iobase +
+						MSP_TWI_INT_STS_REG_OFFSET);
+			pmcmsptwi_writel(reason, data->iobase +
+						MSP_TWI_INT_STS_REG_OFFSET);
+			data->last_result = pmcmsptwi_get_result(reason);
+			return;
+		}
+		udelay(MSP_POLL_DELAY);
+	}
+
+	dev_dbg(&pmcmsptwi_adapter.dev, "Result: Poll timeout\n");
+	data->last_result = MSP_TWI_XFER_TIMEOUT;
+}
+
+/*
+ * Do the transfer (low level):
+ *   May use interrupt-driven or polling, depending on if an IRQ is
+ *   presently registered.
+ * NOTE: Assumes data->lock is held.
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_do_xfer(
+			u32 reg, struct pmcmsptwi_data *data)
+{
+	dev_dbg(&pmcmsptwi_adapter.dev, "Writing cmd reg 0x%08x\n", reg);
+	pmcmsptwi_writel(reg, data->iobase + MSP_TWI_CMD_REG_OFFSET);
+	if (data->irq) {
+		unsigned long timeleft = wait_for_completion_timeout(
+						&data->wait, MSP_IRQ_TIMEOUT);
+		if (timeleft == 0) {
+			dev_dbg(&pmcmsptwi_adapter.dev,
+				"Result: IRQ timeout\n");
+			complete(&data->wait);
+			data->last_result = MSP_TWI_XFER_TIMEOUT;
+		}
+	} else
+		pmcmsptwi_poll_complete(data);
+
+	return data->last_result;
+}
+
+/*
+ * Helper routine, converts 'pmctwi_cmd' struct to register format
+ */
+static inline u32 pmcmsptwi_cmd_to_reg(const struct pmcmsptwi_cmd *cmd)
+{
+	return ((cmd->type & 0x3) << 8) |
+		(((cmd->write_len - 1) & 0x7) << 4) |
+		((cmd->read_len - 1) & 0x7);
+}
+
+/*
+ * Do the transfer (high level)
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
+			struct pmcmsptwi_cmd *cmd,
+			struct pmcmsptwi_data *data)
+{
+	enum pmcmsptwi_xfer_result retval;
+
+	if ((cmd->type == MSP_TWI_CMD_WRITE && cmd->write_len == 0) ||
+	    (cmd->type == MSP_TWI_CMD_READ && cmd->read_len == 0) ||
+	    (cmd->type == MSP_TWI_CMD_WRITE_READ &&
+	    (cmd->read_len == 0 || cmd->write_len == 0))) {
+		dev_err(&pmcmsptwi_adapter.dev,
+			"%s: Cannot transfer less than 1 byte\n",
+			__FUNCTION__);
+		return -EINVAL;
+	}
+
+	if (cmd->read_len > MSP_MAX_BYTES_PER_RW ||
+	    cmd->write_len > MSP_MAX_BYTES_PER_RW) {
+		dev_err(&pmcmsptwi_adapter.dev,
+			"%s: Cannot transfer more than %d bytes\n",
+			__FUNCTION__, MSP_MAX_BYTES_PER_RW);
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+	dev_dbg(&pmcmsptwi_adapter.dev,
+		"Setting address to 0x%04x\n", cmd->addr);
+	pmcmsptwi_writel(cmd->addr, data->iobase + MSP_TWI_ADD_REG_OFFSET);
+
+	if (cmd->type == MSP_TWI_CMD_WRITE ||
+	    cmd->type == MSP_TWI_CMD_WRITE_READ) {
+		__be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+		tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
+		dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
+		pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
+				data->iobase + MSP_TWI_DAT_0_REG_OFFSET);
+		if (cmd->write_len > 4)
+			pmcmsptwi_writel(tmp >> 32,
+				data->iobase + MSP_TWI_DAT_1_REG_OFFSET);
+	}
+
+	retval = pmcmsptwi_do_xfer(pmcmsptwi_cmd_to_reg(cmd), data);
+	if (retval != MSP_TWI_XFER_OK)
+		goto xfer_err;
+
+	if (cmd->type == MSP_TWI_CMD_READ ||
+	    cmd->type == MSP_TWI_CMD_WRITE_READ) {
+		int i;
+		u64 rmsk = ~(0xffffffffffffffffLL << (cmd->read_len * 8));
+		u64 tmp = (u64)pmcmsptwi_readl(data->iobase +
+					MSP_TWI_DAT_0_REG_OFFSET);
+		if (cmd->read_len > 4)
+			tmp |= (u64)pmcmsptwi_readl(data->iobase +
+					MSP_TWI_DAT_1_REG_OFFSET) << 32;
+		tmp &= rmsk;
+		dev_dbg(&pmcmsptwi_adapter.dev, "Read 0x%016llx\n", tmp);
+
+		for (i = 0; i < cmd->read_len; i++)
+			cmd->read_data[i] = tmp >> i;
+	}
+
+xfer_err:
+	mutex_unlock(&data->lock);
+
+	return retval;
+}
+
+/* -- Algorithm functions -- */
+
+/*
+ * Sends an i2c command out on the adapter
+ */
+static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msg, int num)
+{
+	struct pmcmsptwi_data *data = i2c_get_adapdata(adap);
+	struct pmcmsptwi_cmd cmd;
+	struct pmcmsptwi_cfg oldcfg, newcfg;
+	int ret;
+
+	if (num > 2) {
+		dev_dbg(&adap->dev, "%d messages unsupported\n", num);
+		return -EINVAL;
+	} else if (num == 2) {
+		/* Check for a dual write-then-read command */
+		struct i2c_msg *nextmsg = msg + 1;
+		if (!(msg->flags & I2C_M_RD) &&
+		    (nextmsg->flags & I2C_M_RD) &&
+		    msg->addr == nextmsg->addr) {
+			cmd.type = MSP_TWI_CMD_WRITE_READ;
+			cmd.write_len = msg->len;
+			cmd.write_data = msg->buf;
+			cmd.read_len = nextmsg->len;
+			cmd.read_data = nextmsg->buf;
+		} else {
+			dev_dbg(&adap->dev,
+				"Non write-read dual messages unsupported\n");
+			return -EINVAL;
+		}
+	} else if (msg->flags & I2C_M_RD) {
+		cmd.type = MSP_TWI_CMD_READ;
+		cmd.read_len = msg->len;
+		cmd.read_data = msg->buf;
+		cmd.write_len = 0;
+		cmd.write_data = NULL;
+	} else {
+		cmd.type = MSP_TWI_CMD_WRITE;
+		cmd.read_len = 0;
+		cmd.read_data = NULL;
+		cmd.write_len = msg->len;
+		cmd.write_data = msg->buf;
+	}
+
+	if (msg->len == 0) {
+		dev_err(&adap->dev, "Zero-byte messages unsupported\n");
+		return -EINVAL;
+	}
+
+	cmd.addr = msg->addr;
+
+	if (msg->flags & I2C_M_TEN) {
+		pmcmsptwi_get_twi_config(&newcfg, data);
+		memcpy(&oldcfg, &newcfg, sizeof(oldcfg));
+
+		/* Set the special 10-bit address flag */
+		newcfg.add10 = 1;
+
+		pmcmsptwi_set_twi_config(&newcfg, data);
+	}
+
+	/* Execute the command */
+	ret = pmcmsptwi_xfer_cmd(&cmd, data);
+
+	if (msg->flags & I2C_M_TEN)
+		pmcmsptwi_set_twi_config(&oldcfg, data);
+
+	dev_dbg(&adap->dev, "I2C %s of %d bytes ",
+		(msg->flags & I2C_M_RD) ? "read" : "write", msg->len);
+	if (ret != MSP_TWI_XFER_OK) {
+		/*
+		 * TODO: We could potentially loop and retry in the case
+		 * of MSP_TWI_XFER_TIMEOUT.
+		 */
+		dev_dbg(&adap->dev, "failed\n");
+		return -1;
+	}
+
+	dev_dbg(&adap->dev, "succeeded\n");
+	return 0;
+}
+
+static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+		I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+/* -- Initialization -- */
+
+static struct i2c_algorithm pmcmsptwi_algo = {
+	.master_xfer	= pmcmsptwi_master_xfer,
+	.functionality	= pmcmsptwi_i2c_func,
+};
+
+static struct i2c_adapter pmcmsptwi_adapter = {
+	.owner		= THIS_MODULE,
+	.class		= I2C_CLASS_HWMON,
+	.algo		= &pmcmsptwi_algo,
+	.name		= DRV_NAME,
+};
+
+static struct platform_driver pmcmsptwi_driver = {
+	.probe  = pmcmsptwi_probe,
+	.remove	= __devexit_p(pmcmsptwi_remove),
+	.driver {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init pmcmsptwi_init(void)
+{
+	return platform_driver_register(&pmcmsptwi_driver);
+}
+
+static void __exit pmcmsptwi_exit(void)
+{
+	platform_driver_unregister(&pmcmsptwi_driver);
+}
+
+MODULE_DESCRIPTION("PMC MSP TWI/SMBus/I2C driver");
+MODULE_LICENSE("GPL");
+
+module_init(pmcmsptwi_init);
+module_exit(pmcmsptwi_exit);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 1425d2245c82..0ab4f2627c26 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -121,8 +121,7 @@ static s32 i2c_powermac_smbus_xfer(	struct i2c_adapter*	adap,
 		if (rc)
 			goto bail;
 		rc = pmac_i2c_xfer(bus, addrdir, 1, command,
-				   read ? data->block : &data->block[1],
-				   data->block[0]);
+				   &data->block[1], data->block[0]);
 		break;
 
         default:
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 28e7b91a4553..9d6b790d4321 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -921,7 +921,14 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		i2c->adap.class = plat->class;
 	}
 
-	ret = i2c_add_adapter(&i2c->adap);
+	/*
+	 * If "dev->id" is negative we consider it as zero.
+	 * The reason to do so is to avoid sysfs names that only make
+	 * sense when there are multiple adapters.
+	 */
+	i2c->adap.nr = dev->id >= 0 ? dev->id : 0;
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
 	if (ret < 0) {
 		printk(KERN_INFO "I2C: Failed to add bus\n");
 		goto eadapt;
diff --git a/drivers/i2c/busses/i2c-rpx.c b/drivers/i2c/busses/i2c-rpx.c
deleted file mode 100644
index 8764df06f51d..000000000000
--- a/drivers/i2c/busses/i2c-rpx.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Embedded Planet RPX Lite MPC8xx CPM I2C interface.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
- *
- * moved into proper i2c interface;
- * Brad Parker (brad@heeltoe.com)
- *
- * RPX lite specific parts of the i2c interface
- * Update:  There actually isn't anything RPXLite-specific about this module.
- * This should work for most any 8xx board.  The console messages have been 
- * changed to eliminate RPXLite references.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-8xx.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-
-
-static void
-rpx_iic_init(struct i2c_algo_8xx_data *data)
-{
-	volatile cpm8xx_t *cp;
-	volatile immap_t *immap;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-	immap = (immap_t *)IMAP_ADDR;	/* and to internal registers */
-
-	data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
-	/* Check for and use a microcode relocation patch.
-	*/
-	if ((data->reloc = data->iip->iic_rpbase))
-		data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase];
-		
-	data->i2c = (i2c8xx_t *)&(immap->im_i2c);
-	data->cp = cp;
-
-	/* Initialize Port B IIC pins.
-	*/
-	cp->cp_pbpar |= 0x00000030;
-	cp->cp_pbdir |= 0x00000030;
-	cp->cp_pbodr |= 0x00000030;
-
-	/* Allocate space for two transmit and two receive buffer
-	 * descriptors in the DP ram.
-	 */
-	data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8);
-		
-	/* ptr to i2c area */
-	data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c);
-}
-
-static int rpx_install_isr(int irq, void (*func)(void *), void *data)
-{
-	/* install interrupt handler */
-	cpm_install_handler(irq, func, data);
-
-	return 0;
-}
-
-static struct i2c_algo_8xx_data rpx_data = {
-	.setisr = rpx_install_isr
-};
-
-static struct i2c_adapter rpx_ops = {
-	.owner		= THIS_MODULE,
-	.name		= "m8xx",
-	.id		= I2C_HW_MPC8XX_EPON,
-	.algo_data	= &rpx_data,
-};
-
-int __init i2c_rpx_init(void)
-{
-	printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n");
-
-	/* reset hardware to sane state */
-	rpx_iic_init(&rpx_data);
-
-	if (i2c_8xx_add_bus(&rpx_ops) < 0) {
-		printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-void __exit i2c_rpx_exit(void)
-{
-	i2c_8xx_del_bus(&rpx_ops);
-}
-
-MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards");
-
-module_init(i2c_rpx_init);
-module_exit(i2c_rpx_exit);
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index b7fb65c30112..8adf4abaa035 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -25,8 +25,6 @@
 /* This interfaces to the I2C bus of the Savage4 to gain access to
    the BT869 and possibly other I2C devices. The DDC bus is not
    yet supported because its register is not memory-mapped.
-   However we leave the DDC code here, commented out, to make
-   it easier to add later.
 */
 
 #include <linux/kernel.h>
@@ -37,36 +35,19 @@
 #include <linux/i2c-algo-bit.h>
 #include <asm/io.h>
 
-/* 3DFX defines */
-#define PCI_CHIP_SAVAGE3D	0x8A20
-#define PCI_CHIP_SAVAGE3D_MV	0x8A21
+/* device IDs */
 #define PCI_CHIP_SAVAGE4	0x8A22
 #define PCI_CHIP_SAVAGE2000	0x9102
-#define PCI_CHIP_PROSAVAGE_PM	0x8A25
-#define PCI_CHIP_PROSAVAGE_KM	0x8A26
-#define PCI_CHIP_SAVAGE_MX_MV	0x8c10
-#define PCI_CHIP_SAVAGE_MX	0x8c11
-#define PCI_CHIP_SAVAGE_IX_MV	0x8c12
-#define PCI_CHIP_SAVAGE_IX	0x8c13
 
 #define REG			0xff20	/* Serial Port 1 Register */
 
 /* bit locations in the register */
-#define DDC_ENAB		0x00040000
-#define DDC_SCL_OUT		0x00080000
-#define DDC_SDA_OUT		0x00100000
-#define DDC_SCL_IN		0x00200000
-#define DDC_SDA_IN		0x00400000
 #define I2C_ENAB		0x00000020
 #define I2C_SCL_OUT		0x00000001
 #define I2C_SDA_OUT		0x00000002
 #define I2C_SCL_IN		0x00000008
 #define I2C_SDA_IN		0x00000010
 
-/* initialization states */
-#define INIT2			0x20
-#define INIT3			0x04
-
 /* delays */
 #define CYCLE_DELAY		10
 #define TIMEOUT			(HZ / 2)
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index a6feed449dbe..283769cecee2 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -129,6 +129,7 @@ MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"
 
 static struct pci_driver sis5595_driver;
 static unsigned short sis5595_base;
+static struct pci_dev *sis5595_pdev;
 
 static u8 sis5595_read(u8 reg)
 {
@@ -379,6 +380,8 @@ MODULE_DEVICE_TABLE (pci, sis5595_ids);
 
 static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	int err;
+
 	if (sis5595_setup(dev)) {
 		dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n");
 		return -ENODEV;
@@ -389,20 +392,24 @@ static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_
 
 	sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x",
 		sis5595_base + SMB_INDEX);
-	return i2c_add_adapter(&sis5595_adapter);
-}
+	err = i2c_add_adapter(&sis5595_adapter);
+	if (err) {
+		release_region(sis5595_base + SMB_INDEX, 2);
+		return err;
+	}
 
-static void __devexit sis5595_remove(struct pci_dev *dev)
-{
-	i2c_del_adapter(&sis5595_adapter);
-	release_region(sis5595_base + SMB_INDEX, 2);
+	/* Always return failure here.  This is to allow other drivers to bind
+	 * to this pci device.  We don't really want to have control over the
+	 * pci device, we only wanted to read as few register values from it.
+	 */
+	sis5595_pdev =  pci_dev_get(dev);
+	return -ENODEV;
 }
 
 static struct pci_driver sis5595_driver = {
 	.name		= "sis5595_smbus",
 	.id_table	= sis5595_ids,
 	.probe		= sis5595_probe,
-	.remove		= __devexit_p(sis5595_remove),
 };
 
 static int __init i2c_sis5595_init(void)
@@ -413,6 +420,12 @@ static int __init i2c_sis5595_init(void)
 static void __exit i2c_sis5595_exit(void)
 {
 	pci_unregister_driver(&sis5595_driver);
+	if (sis5595_pdev) {
+		i2c_del_adapter(&sis5595_adapter);
+		release_region(sis5595_base + SMB_INDEX, 2);
+		pci_dev_put(sis5595_pdev);
+		sis5595_pdev = NULL;
+	}
 }
 
 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
new file mode 100644
index 000000000000..1b0cfd5472fd
--- /dev/null
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -0,0 +1,330 @@
+/*
+ * Driver for the TAOS evaluation modules
+ * These devices include an I2C master which can be controlled over the
+ * serial port.
+ *
+ * Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#define TAOS_BUFFER_SIZE	63
+
+#define TAOS_STATE_INIT		0
+#define TAOS_STATE_IDLE		1
+#define TAOS_STATE_SEND		2
+#define TAOS_STATE_RECV		3
+
+#define TAOS_CMD_RESET		0x12
+
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+struct taos_data {
+	struct i2c_adapter adapter;
+	struct i2c_client *client;
+	int state;
+	u8 addr;		/* last used address */
+	unsigned char buffer[TAOS_BUFFER_SIZE];
+	unsigned int pos;	/* position inside the buffer */
+};
+
+/* TAOS TSL2550 EVM */
+static struct i2c_board_info tsl2550_info = {
+	I2C_BOARD_INFO("tsl2550", 0x39),
+	.type	= "tsl2550",
+};
+
+/* Instantiate i2c devices based on the adapter name */
+static struct i2c_client *taos_instantiate_device(struct i2c_adapter *adapter)
+{
+	if (!strncmp(adapter->name, "TAOS TSL2550 EVM", 16)) {
+		dev_info(&adapter->dev, "Instantiating device %s at 0x%02x\n",
+			tsl2550_info.driver_name, tsl2550_info.addr);
+		return i2c_new_device(adapter, &tsl2550_info);
+	}
+
+	return NULL;
+}
+
+static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			   unsigned short flags, char read_write, u8 command,
+			   int size, union i2c_smbus_data *data)
+{
+	struct serio *serio = adapter->algo_data;
+	struct taos_data *taos = serio_get_drvdata(serio);
+	char *p;
+
+	/* Encode our transaction. "@" is for the device address, "$" for the
+	   SMBus command and "#" for the data. */
+	p = taos->buffer;
+
+	/* The device remembers the last used address, no need to send it
+	   again if it's the same */
+	if (addr != taos->addr)
+		p += sprintf(p, "@%02X", addr);
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_WRITE)
+			sprintf(p, "$#%02X", command);
+		else
+			sprintf(p, "$");
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_WRITE)
+			sprintf(p, "$%02X#%02X", command, data->byte);
+		else
+			sprintf(p, "$%02X", command);
+		break;
+	default:
+		dev_dbg(&adapter->dev, "Unsupported transaction size %d\n",
+			size);
+		return -EINVAL;
+	}
+
+	/* Send the transaction to the TAOS EVM */
+	dev_dbg(&adapter->dev, "Command buffer: %s\n", taos->buffer);
+	taos->pos = 0;
+	taos->state = TAOS_STATE_SEND;
+	serio_write(serio, taos->buffer[0]);
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(250));
+	if (taos->state != TAOS_STATE_IDLE) {
+		dev_err(&adapter->dev, "Transaction failed "
+			"(state=%d, pos=%d)\n", taos->state, taos->pos);
+		taos->addr = 0;
+		return -EIO;
+	}
+	taos->addr = addr;
+
+	/* Start the transaction and read the answer */
+	taos->pos = 0;
+	taos->state = TAOS_STATE_RECV;
+	serio_write(serio, read_write == I2C_SMBUS_WRITE ? '>' : '<');
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(150));
+	if (taos->state != TAOS_STATE_IDLE
+	 || taos->pos != 6) {
+		dev_err(&adapter->dev, "Transaction timeout (pos=%d)\n",
+			taos->pos);
+		return -EIO;
+	}
+	dev_dbg(&adapter->dev, "Answer buffer: %s\n", taos->buffer);
+
+	/* Interpret the returned string */
+	p = taos->buffer + 2;
+	p[3] = '\0';
+	if (!strcmp(p, "NAK"))
+		return -ENODEV;
+
+	if (read_write == I2C_SMBUS_WRITE) {
+		if (!strcmp(p, "ACK"))
+			return 0;
+	} else {
+		if (p[0] == 'x') {
+			data->byte = simple_strtol(p + 1, NULL, 16);
+			return 0;
+		}
+	}
+
+	return -EIO;
+}
+
+static u32 taos_smbus_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static const struct i2c_algorithm taos_algorithm = {
+	.smbus_xfer	= taos_smbus_xfer,
+	.functionality	= taos_smbus_func,
+};
+
+static irqreturn_t taos_interrupt(struct serio *serio, unsigned char data,
+				  unsigned int flags)
+{
+	struct taos_data *taos = serio_get_drvdata(serio);
+
+	switch (taos->state) {
+	case TAOS_STATE_INIT:
+		taos->buffer[taos->pos++] = data;
+		if (data == ':'
+		 || taos->pos == TAOS_BUFFER_SIZE - 1) {
+			taos->buffer[taos->pos] = '\0';
+			taos->state = TAOS_STATE_IDLE;
+			wake_up_interruptible(&wq);
+		}
+		break;
+	case TAOS_STATE_SEND:
+		if (taos->buffer[++taos->pos])
+			serio_write(serio, taos->buffer[taos->pos]);
+		else {
+			taos->state = TAOS_STATE_IDLE;
+			wake_up_interruptible(&wq);
+		}
+		break;
+	case TAOS_STATE_RECV:
+		taos->buffer[taos->pos++] = data;
+		if (data == ']') {
+			taos->buffer[taos->pos] = '\0';
+			taos->state = TAOS_STATE_IDLE;
+			wake_up_interruptible(&wq);
+		}
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Extract the adapter name from the buffer received after reset.
+   The buffer is modified and a pointer inside the buffer is returned. */
+static char *taos_adapter_name(char *buffer)
+{
+	char *start, *end;
+
+	start = strstr(buffer, "TAOS ");
+	if (!start)
+		return NULL;
+
+	end = strchr(start, '\r');
+	if (!end)
+		return NULL;
+	*end = '\0';
+
+	return start;
+}
+
+static int taos_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct taos_data *taos;
+	struct i2c_adapter *adapter;
+	char *name;
+	int err;
+
+	taos = kzalloc(sizeof(struct taos_data), GFP_KERNEL);
+	if (!taos) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	taos->state = TAOS_STATE_INIT;
+	serio_set_drvdata(serio, taos);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto exit_kfree;
+
+	adapter = &taos->adapter;
+	adapter->owner = THIS_MODULE;
+	adapter->algo = &taos_algorithm;
+	adapter->algo_data = serio;
+	adapter->dev.parent = &serio->dev;
+
+	/* Reset the TAOS evaluation module to identify it */
+	serio_write(serio, TAOS_CMD_RESET);
+	wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+					 msecs_to_jiffies(2000));
+
+	if (taos->state != TAOS_STATE_IDLE) {
+		err = -ENODEV;
+		dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, "
+			"pos=%d)\n", taos->state, taos->pos);
+		goto exit_close;
+	}
+
+	name = taos_adapter_name(taos->buffer);
+	if (!name) {
+		err = -ENODEV;
+		dev_err(&serio->dev, "TAOS EVM identification failed\n");
+		goto exit_close;
+	}
+	strlcpy(adapter->name, name, sizeof(adapter->name));
+
+	err = i2c_add_adapter(adapter);
+	if (err)
+		goto exit_close;
+	dev_dbg(&serio->dev, "Connected to TAOS EVM\n");
+
+	taos->client = taos_instantiate_device(adapter);
+	return 0;
+
+ exit_close:
+	serio_close(serio);
+ exit_kfree:
+	serio_set_drvdata(serio, NULL);
+	kfree(taos);
+ exit:
+	return err;
+}
+
+static void taos_disconnect(struct serio *serio)
+{
+	struct taos_data *taos = serio_get_drvdata(serio);
+
+	if (taos->client)
+		i2c_unregister_device(taos->client);
+	i2c_del_adapter(&taos->adapter);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	kfree(taos);
+
+	dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n");
+}
+
+static struct serio_device_id taos_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TAOSEVM,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(serio, taos_serio_ids);
+
+static struct serio_driver taos_drv = {
+	.driver		= {
+		.name	= "taos-evm",
+	},
+	.description	= "TAOS evaluation module driver",
+	.id_table	= taos_serio_ids,
+	.connect	= taos_connect,
+	.disconnect	= taos_disconnect,
+	.interrupt	= taos_interrupt,
+};
+
+static int __init taos_init(void)
+{
+	return serio_register_driver(&taos_drv);
+}
+
+static void __exit taos_exit(void)
+{
+	serio_unregister_driver(&taos_drv);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("TAOS evaluation module driver");
+MODULE_LICENSE("GPL");
+
+module_init(taos_init);
+module_exit(taos_exit);
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 7a2bc06304fc..edc275002f80 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -235,7 +235,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
 		if (!(vt596_features & FEATURE_I2CBLOCK))
 			goto exit_unsupported;
 		if (read_write == I2C_SMBUS_READ)
-			outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+			outb_p(data->block[0], SMBHSTDAT0);
 		/* Fall through */
 	case I2C_SMBUS_BLOCK_DATA:
 		outb_p(command, SMBHSTCMD);
@@ -397,8 +397,7 @@ found:
 	case PCI_DEVICE_ID_VIA_82C686_4:
 		/* The VT82C686B (rev 0x40) does support I2C block
 		   transactions, but the VT82C686A (rev 0x30) doesn't */
-		if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
-		 && temp >= 0x40)
+		if (pdev->revision >= 0x40)
 			vt596_features |= FEATURE_I2CBLOCK;
 		break;
 	}
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 0d6bd4f7b7fa..e6c4a2b762ec 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -310,8 +310,6 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
 		break;
 
 	case I2C_SMBUS_I2C_BLOCK_DATA:
-		if (rw == I2C_SMBUS_READ)
-			data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
 		len = data->block[0];
 		if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
 			return -EINVAL;
@@ -388,7 +386,7 @@ static const struct i2c_algorithm scx200_acb_algorithm = {
 };
 
 static struct scx200_acb_iface *scx200_acb_list;
-static DECLARE_MUTEX(scx200_acb_list_mutex);
+static DEFINE_MUTEX(scx200_acb_list_mutex);
 
 static __init int scx200_acb_probe(struct scx200_acb_iface *iface)
 {
@@ -472,10 +470,10 @@ static int __init scx200_acb_create(struct scx200_acb_iface *iface)
 		return -ENODEV;
 	}
 
-	down(&scx200_acb_list_mutex);
+	mutex_lock(&scx200_acb_list_mutex);
 	iface->next = scx200_acb_list;
 	scx200_acb_list = iface;
-	up(&scx200_acb_list_mutex);
+	mutex_unlock(&scx200_acb_list_mutex);
 
 	return 0;
 }
@@ -633,10 +631,10 @@ static void __exit scx200_acb_cleanup(void)
 {
 	struct scx200_acb_iface *iface;
 
-	down(&scx200_acb_list_mutex);
+	mutex_lock(&scx200_acb_list_mutex);
 	while ((iface = scx200_acb_list) != NULL) {
 		scx200_acb_list = iface->next;
-		up(&scx200_acb_list_mutex);
+		mutex_unlock(&scx200_acb_list_mutex);
 
 		i2c_del_adapter(&iface->adapter);
 
@@ -648,9 +646,9 @@ static void __exit scx200_acb_cleanup(void)
 			release_region(iface->base, 8);
 
 		kfree(iface);
-		down(&scx200_acb_list_mutex);
+		mutex_lock(&scx200_acb_list_mutex);
 	}
-	up(&scx200_acb_list_mutex);
+	mutex_unlock(&scx200_acb_list_mutex);
 }
 
 module_init(scx200_acb_init);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index ea085a006ead..3944e889cb21 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -5,7 +5,7 @@
 menu "Miscellaneous I2C Chip support"
 
 config SENSORS_DS1337
-	tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
+	tristate "Dallas DS1337 and DS1339 Real Time Clock (DEPRECATED)"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for Dallas Semiconductor
@@ -14,8 +14,11 @@ config SENSORS_DS1337
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1337.
 
+	  This driver is deprecated and will be dropped soon. Use
+	  rtc-ds1307 instead.
+
 config SENSORS_DS1374
-	tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock"
+	tristate "Dallas DS1374 Real Time Clock (DEPRECATED)"
 	depends on EXPERIMENTAL
 	help
 	  If you say yes here you get support for Dallas Semiconductor
@@ -24,6 +27,19 @@ config SENSORS_DS1374
 	  This driver can also be built as a module.  If so, the module
 	  will be called ds1374.
 
+	  This driver is deprecated and will be dropped soon. Use
+	  rtc-ds1374 instead.
+
+config DS1682
+	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+	depends on EXPERIMENTAL
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS1682 Total Elapsed Time Recorder.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds1682.
+
 config SENSORS_EEPROM
 	tristate "EEPROM reader"
 	depends on EXPERIMENTAL
@@ -101,7 +117,7 @@ config TPS65010
 	  will be called tps65010.
 
 config SENSORS_M41T00
-	tristate "ST M41T00 RTC chip"
+	tristate "ST M41T00 RTC chip (DEPRECATED)"
 	depends on PPC32
 	help
 	  If you say yes here you get support for the ST M41T00 RTC chip.
@@ -109,6 +125,9 @@ config SENSORS_M41T00
 	  This driver can also be built as a module.  If so, the module
 	  will be called m41t00.
 
+	  This driver is deprecated and will be dropped soon. Use
+	  rtc-ds1307 or rtc-m41t80 instead.
+
 config SENSORS_MAX6875
 	tristate "Maxim MAX6875 Power supply supervisor"
 	depends on EXPERIMENTAL
@@ -124,4 +143,14 @@ config SENSORS_MAX6875
 	  This driver can also be built as a module.  If so, the module
 	  will be called max6875.
 
+config SENSORS_TSL2550
+	tristate "Taos TSL2550 ambient light sensor"
+	depends on EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Taos TSL2550
+	  ambient light sensor.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called tsl2550.
+
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 779868ef2e26..d8cbeb3f4b63 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_SENSORS_DS1337)	+= ds1337.o
 obj-$(CONFIG_SENSORS_DS1374)	+= ds1374.o
+obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_M41T00)	+= m41t00.o
@@ -12,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
+obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c
new file mode 100644
index 000000000000..25fd4676fb17
--- /dev/null
+++ b/drivers/i2c/chips/ds1682.c
@@ -0,0 +1,259 @@
+/*
+ * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
+ *
+ * Written by: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (C) 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The DS1682 elapsed timer recorder is a simple device that implements
+ * one elapsed time counter, one event counter, an alarm signal and 10
+ * bytes of general purpose EEPROM.
+ *
+ * This driver provides access to the DS1682 counters and user data via
+ * the sysfs.  The following attributes are added to the device node:
+ *     elapsed_time (u32): Total elapsed event time in ms resolution
+ *     alarm_time (u32): When elapsed time exceeds the value in alarm_time,
+ *                       then the alarm pin is asserted.
+ *     event_count (u16): number of times the event pin has gone low.
+ *     eeprom (u8[10]): general purpose EEPROM
+ *
+ * Counter registers and user data are both read/write unless the device
+ * has been write protected.  This driver does not support turning off write
+ * protection.  Once write protection is turned on, it is impossible to
+ * turn it off again, so I have left the feature out of this driver to avoid
+ * accidental enabling, but it is trivial to add write protect support.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/hwmon-sysfs.h>
+
+/* Device registers */
+#define DS1682_REG_CONFIG		0x00
+#define DS1682_REG_ALARM		0x01
+#define DS1682_REG_ELAPSED		0x05
+#define DS1682_REG_EVT_CNTR		0x09
+#define DS1682_REG_EEPROM		0x0b
+#define DS1682_REG_RESET		0x1d
+#define DS1682_REG_WRITE_DISABLE	0x1e
+#define DS1682_REG_WRITE_MEM_DISABLE	0x1f
+
+#define DS1682_EEPROM_SIZE		10
+
+/*
+ * Generic counter attributes
+ */
+static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	__le32 val = 0;
+	int rc;
+
+	dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
+
+	/* Read the register */
+	rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr,
+					   (u8 *) & val);
+	if (rc < 0)
+		return -EIO;
+
+	/* Special case: the 32 bit regs are time values with 1/4s
+	 * resolution, scale them up to milliseconds */
+	if (sattr->nr == 4)
+		return sprintf(buf, "%llu\n", ((u64) le32_to_cpu(val)) * 250);
+
+	/* Format the output string and return # of bytes */
+	return sprintf(buf, "%li\n", (long)le32_to_cpu(val));
+}
+
+static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	char *endp;
+	u64 val;
+	__le32 val_le;
+	int rc;
+
+	dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
+
+	/* Decode input */
+	val = simple_strtoull(buf, &endp, 0);
+	if (buf == endp) {
+		dev_dbg(dev, "input string not a number\n");
+		return -EINVAL;
+	}
+
+	/* Special case: the 32 bit regs are time values with 1/4s
+	 * resolution, scale input down to quarter-seconds */
+	if (sattr->nr == 4)
+		do_div(val, 250);
+
+	/* write out the value */
+	val_le = cpu_to_le32(val);
+	rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
+					    (u8 *) & val_le);
+	if (rc < 0) {
+		dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
+			sattr->index, sattr->nr);
+		return -EIO;
+	}
+
+	return count;
+}
+
+/*
+ * Simple register attributes
+ */
+static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
+			    ds1682_store, 4, DS1682_REG_ELAPSED);
+static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show,
+			    ds1682_store, 4, DS1682_REG_ALARM);
+static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show,
+			    ds1682_store, 2, DS1682_REG_EVT_CNTR);
+
+static const struct attribute_group ds1682_group = {
+	.attrs = (struct attribute *[]) {
+		&sensor_dev_attr_elapsed_time.dev_attr.attr,
+		&sensor_dev_attr_alarm_time.dev_attr.attr,
+		&sensor_dev_attr_event_count.dev_attr.attr,
+		NULL,
+	},
+};
+
+/*
+ * User data attribute
+ */
+static ssize_t ds1682_eeprom_read(struct kobject *kobj, char *buf, loff_t off,
+				  size_t count)
+{
+	struct i2c_client *client = kobj_to_i2c_client(kobj);
+	int rc;
+
+	dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n",
+		buf, off, count);
+
+	if (off >= DS1682_EEPROM_SIZE)
+		return 0;
+
+	if (off + count > DS1682_EEPROM_SIZE)
+		count = DS1682_EEPROM_SIZE - off;
+
+	rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off,
+					   count, buf);
+	if (rc < 0)
+		return -EIO;
+
+	return count;
+}
+
+static ssize_t ds1682_eeprom_write(struct kobject *kobj, char *buf, loff_t off,
+				   size_t count)
+{
+	struct i2c_client *client = kobj_to_i2c_client(kobj);
+
+	dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n",
+		buf, off, count);
+
+	if (off >= DS1682_EEPROM_SIZE)
+		return -ENOSPC;
+
+	if (off + count > DS1682_EEPROM_SIZE)
+		count = DS1682_EEPROM_SIZE - off;
+
+	/* Write out to the device */
+	if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
+					   count, buf) < 0)
+		return -EIO;
+
+	return count;
+}
+
+static struct bin_attribute ds1682_eeprom_attr = {
+	.attr = {
+		.name = "eeprom",
+		.mode = S_IRUGO | S_IWUSR,
+		.owner = THIS_MODULE,
+	},
+	.size = DS1682_EEPROM_SIZE,
+	.read = ds1682_eeprom_read,
+	.write = ds1682_eeprom_write,
+};
+
+/*
+ * Called when a ds1682 device is matched with this driver
+ */
+static int ds1682_probe(struct i2c_client *client)
+{
+	int rc;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&client->dev, "i2c bus does not support the ds1682\n");
+		rc = -ENODEV;
+		goto exit;
+	}
+
+	rc = sysfs_create_group(&client->dev.kobj, &ds1682_group);
+	if (rc)
+		goto exit;
+
+	rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
+	if (rc)
+		goto exit_bin_attr;
+
+	return 0;
+
+ exit_bin_attr:
+	sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+ exit:
+	return rc;
+}
+
+static int ds1682_remove(struct i2c_client *client)
+{
+	sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
+	sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+	return 0;
+}
+
+static struct i2c_driver ds1682_driver = {
+	.driver = {
+		.name = "ds1682",
+	},
+	.probe = ds1682_probe,
+	.remove = ds1682_remove,
+};
+
+static int __init ds1682_init(void)
+{
+	return i2c_add_driver(&ds1682_driver);
+}
+
+static void __exit ds1682_exit(void)
+{
+	i2c_del_driver(&ds1682_driver);
+}
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds1682_init);
+module_exit(ds1682_exit);
diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c
index bfce13c8f1ff..d3da1fb05b9b 100644
--- a/drivers/i2c/chips/eeprom.c
+++ b/drivers/i2c/chips/eeprom.c
@@ -88,8 +88,10 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice)
 		dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
 
 		if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
-			for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX)
-				if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX)
+			for (i = slice << 5; i < (slice + 1) << 5; i += 32)
+				if (i2c_smbus_read_i2c_block_data(client, i,
+							32, data->data + i)
+							!= 32)
 					goto exit;
 		} else {
 			if (i2c_smbus_write_byte(client, slice << 5)) {
@@ -110,7 +112,8 @@ exit:
 	mutex_unlock(&data->update_lock);
 }
 
-static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+			   char *buf, loff_t off, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
 	struct eeprom_data *data = i2c_get_clientdata(client);
@@ -143,7 +146,6 @@ static struct bin_attribute eeprom_attr = {
 	.attr = {
 		.name = "eeprom",
 		.mode = S_IRUGO,
-		.owner = THIS_MODULE,
 	},
 	.size = EEPROM_SIZE,
 	.read = eeprom_read,
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index 76645c142977..64692f666372 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -106,6 +106,7 @@ static void max6875_update_slice(struct i2c_client *client, int slice)
 					    I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
 			if (i2c_smbus_read_i2c_block_data(client,
 							  MAX6875_CMD_BLK_READ,
+							  SLICE_SIZE,
 							  buf) != SLICE_SIZE) {
 				goto exit_up;
 			}
@@ -125,8 +126,9 @@ exit_up:
 	mutex_unlock(&data->update_lock);
 }
 
-static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off,
-			    size_t count)
+static ssize_t max6875_read(struct kobject *kobj,
+			    struct bin_attribute *bin_attr,
+			    char *buf, loff_t off, size_t count)
 {
 	struct i2c_client *client = kobj_to_i2c_client(kobj);
 	struct max6875_data *data = i2c_get_clientdata(client);
@@ -152,7 +154,6 @@ static struct bin_attribute user_eeprom_attr = {
 	.attr = {
 		.name = "eeprom",
 		.mode = S_IRUGO,
-		.owner = THIS_MODULE,
 	},
 	.size = USER_EEPROM_SIZE,
 	.read = max6875_read,
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
new file mode 100644
index 000000000000..3de4b19ba08f
--- /dev/null
+++ b/drivers/i2c/chips/tsl2550.c
@@ -0,0 +1,460 @@
+/*
+ *  tsl2550.c - Linux kernel modules for ambient light sensor
+ *
+ *  Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#define TSL2550_DRV_NAME	"tsl2550"
+#define DRIVER_VERSION		"1.1.1"
+
+/*
+ * Defines
+ */
+
+#define TSL2550_POWER_DOWN		0x00
+#define TSL2550_POWER_UP		0x03
+#define TSL2550_STANDARD_RANGE		0x18
+#define TSL2550_EXTENDED_RANGE		0x1d
+#define TSL2550_READ_ADC0		0x43
+#define TSL2550_READ_ADC1		0x83
+
+/*
+ * Structs
+ */
+
+struct tsl2550_data {
+	struct i2c_client *client;
+	struct mutex update_lock;
+
+	unsigned int power_state : 1;
+	unsigned int operating_mode : 1;
+};
+
+/*
+ * Global data
+ */
+
+static const u8 TSL2550_MODE_RANGE[2] = {
+	TSL2550_STANDARD_RANGE, TSL2550_EXTENDED_RANGE,
+};
+
+/*
+ * Management functions
+ */
+
+static int tsl2550_set_operating_mode(struct i2c_client *client, int mode)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+
+	int ret = i2c_smbus_write_byte(client, TSL2550_MODE_RANGE[mode]);
+
+	data->operating_mode = mode;
+
+	return ret;
+}
+
+static int tsl2550_set_power_state(struct i2c_client *client, int state)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	int ret;
+
+	if (state == 0)
+		ret = i2c_smbus_write_byte(client, TSL2550_POWER_DOWN);
+	else {
+		ret = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+
+		/* On power up we should reset operating mode also... */
+		tsl2550_set_operating_mode(client, data->operating_mode);
+	}
+
+	data->power_state = state;
+
+	return ret;
+}
+
+static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
+{
+	unsigned long end;
+	int loop = 0, ret = 0;
+
+	/*
+	 * Read ADC channel waiting at most 400ms (see data sheet for further
+	 * info).
+	 * To avoid long busy wait we spin for few milliseconds then
+	 * start sleeping.
+	 */
+	end = jiffies + msecs_to_jiffies(400);
+	while (time_before(jiffies, end)) {
+		i2c_smbus_write_byte(client, cmd);
+
+		if (loop++ < 5)
+			mdelay(1);
+		else
+			msleep(1);
+
+		ret = i2c_smbus_read_byte(client);
+		if (ret < 0)
+			return ret;
+		else if (ret & 0x0080)
+			break;
+	}
+	if (!(ret & 0x80))
+		return -EIO;
+	return ret & 0x7f;	/* remove the "valid" bit */
+}
+
+/*
+ * LUX calculation
+ */
+
+#define	TSL2550_MAX_LUX		1846
+
+static const u8 ratio_lut[] = {
+	100, 100, 100, 100, 100, 100, 100, 100,
+	100, 100, 100, 100, 100, 100, 99, 99,
+	99, 99, 99, 99, 99, 99, 99, 99,
+	99, 99, 99, 98, 98, 98, 98, 98,
+	98, 98, 97, 97, 97, 97, 97, 96,
+	96, 96, 96, 95, 95, 95, 94, 94,
+	93, 93, 93, 92, 92, 91, 91, 90,
+	89, 89, 88, 87, 87, 86, 85, 84,
+	83, 82, 81, 80, 79, 78, 77, 75,
+	74, 73, 71, 69, 68, 66, 64, 62,
+	60, 58, 56, 54, 52, 49, 47, 44,
+	42, 41, 40, 40, 39, 39, 38, 38,
+	37, 37, 37, 36, 36, 36, 35, 35,
+	35, 35, 34, 34, 34, 34, 33, 33,
+	33, 33, 32, 32, 32, 32, 32, 31,
+	31, 31, 31, 31, 30, 30, 30, 30,
+	30,
+};
+
+static const u16 count_lut[] = {
+	0, 1, 2, 3, 4, 5, 6, 7,
+	8, 9, 10, 11, 12, 13, 14, 15,
+	16, 18, 20, 22, 24, 26, 28, 30,
+	32, 34, 36, 38, 40, 42, 44, 46,
+	49, 53, 57, 61, 65, 69, 73, 77,
+	81, 85, 89, 93, 97, 101, 105, 109,
+	115, 123, 131, 139, 147, 155, 163, 171,
+	179, 187, 195, 203, 211, 219, 227, 235,
+	247, 263, 279, 295, 311, 327, 343, 359,
+	375, 391, 407, 423, 439, 455, 471, 487,
+	511, 543, 575, 607, 639, 671, 703, 735,
+	767, 799, 831, 863, 895, 927, 959, 991,
+	1039, 1103, 1167, 1231, 1295, 1359, 1423, 1487,
+	1551, 1615, 1679, 1743, 1807, 1871, 1935, 1999,
+	2095, 2223, 2351, 2479, 2607, 2735, 2863, 2991,
+	3119, 3247, 3375, 3503, 3631, 3759, 3887, 4015,
+};
+
+/*
+ * This function is described into Taos TSL2550 Designer's Notebook
+ * pages 2, 3.
+ */
+static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
+{
+	unsigned int lux;
+
+	/* Look up count from channel values */
+	u16 c0 = count_lut[ch0];
+	u16 c1 = count_lut[ch1];
+
+	/*
+	 * Calculate ratio.
+	 * Note: the "128" is a scaling factor
+	 */
+	u8 r = 128;
+
+	/* Avoid division by 0 and count 1 cannot be greater than count 0 */
+	if (c0 && (c1 <= c0))
+		r = c1 * 128 / c0;
+	else
+		return -1;
+
+	/* Calculate LUX */
+	lux = ((c0 - c1) * ratio_lut[r]) / 256;
+
+	/* LUX range check */
+	return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
+}
+
+/*
+ * SysFS support
+ */
+
+static ssize_t tsl2550_show_power_state(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sprintf(buf, "%u\n", data->power_state);
+}
+
+static ssize_t tsl2550_store_power_state(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int ret;
+
+	if (val < 0 || val > 1)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	ret = tsl2550_set_power_state(client, val);
+	mutex_unlock(&data->update_lock);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+		   tsl2550_show_power_state, tsl2550_store_power_state);
+
+static ssize_t tsl2550_show_operating_mode(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sprintf(buf, "%u\n", data->operating_mode);
+}
+
+static ssize_t tsl2550_store_operating_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int ret;
+
+	if (val < 0 || val > 1)
+		return -EINVAL;
+
+	if (data->power_state == 0)
+		return -EBUSY;
+
+	mutex_lock(&data->update_lock);
+	ret = tsl2550_set_operating_mode(client, val);
+	mutex_unlock(&data->update_lock);
+
+	if (ret < 0)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
+		   tsl2550_show_operating_mode, tsl2550_store_operating_mode);
+
+static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
+{
+	u8 ch0, ch1;
+	int ret;
+
+	ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC0);
+	if (ret < 0)
+		return ret;
+	ch0 = ret;
+
+	mdelay(1);
+
+	ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
+	if (ret < 0)
+		return ret;
+	ch1 = ret;
+
+	/* Do the job */
+	ret = tsl2550_calculate_lux(ch0, ch1);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t tsl2550_show_lux1_input(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	int ret;
+
+	/* No LUX data if not operational */
+	if (!data->power_state)
+		return -EBUSY;
+
+	mutex_lock(&data->update_lock);
+	ret = __tsl2550_show_lux(client, buf);
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static DEVICE_ATTR(lux1_input, S_IRUGO,
+		   tsl2550_show_lux1_input, NULL);
+
+static struct attribute *tsl2550_attributes[] = {
+	&dev_attr_power_state.attr,
+	&dev_attr_operating_mode.attr,
+	&dev_attr_lux1_input.attr,
+	NULL
+};
+
+static const struct attribute_group tsl2550_attr_group = {
+	.attrs = tsl2550_attributes,
+};
+
+/*
+ * Initialization function
+ */
+
+static int tsl2550_init_client(struct i2c_client *client)
+{
+	struct tsl2550_data *data = i2c_get_clientdata(client);
+	int err;
+
+	/*
+	 * Probe the chip. To do so we try to power up the device and then to
+	 * read back the 0x03 code
+	 */
+	err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+	if (err < 0)
+		return err;
+	mdelay(1);
+	if (i2c_smbus_read_byte(client) != TSL2550_POWER_UP)
+		return -ENODEV;
+	data->power_state = 1;
+
+	/* Set the default operating mode */
+	err = i2c_smbus_write_byte(client,
+				   TSL2550_MODE_RANGE[data->operating_mode]);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+
+static struct i2c_driver tsl2550_driver;
+static int __devinit tsl2550_probe(struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct tsl2550_data *data;
+	int *opmode, err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+		err = -EIO;
+		goto exit;
+	}
+
+	data = kzalloc(sizeof(struct tsl2550_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	data->client = client;
+	i2c_set_clientdata(client, data);
+
+	/* Check platform data */
+	opmode = client->dev.platform_data;
+	if (opmode) {
+		if (*opmode < 0 || *opmode > 1) {
+			dev_err(&client->dev, "invalid operating_mode (%d)\n",
+					*opmode);
+			err = -EINVAL;
+			goto exit_kfree;
+		}
+		data->operating_mode = *opmode;
+	} else
+		data->operating_mode = 0;	/* default mode is standard */
+	dev_info(&client->dev, "%s operating mode\n",
+			data->operating_mode ? "extended" : "standard");
+
+	mutex_init(&data->update_lock);
+
+	/* Initialize the TSL2550 chip */
+	err = tsl2550_init_client(client);
+	if (err)
+		goto exit_kfree;
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &tsl2550_attr_group);
+	if (err)
+		goto exit_kfree;
+
+	dev_info(&client->dev, "support ver. %s enabled\n", DRIVER_VERSION);
+
+	return 0;
+
+exit_kfree:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit tsl2550_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group);
+
+	/* Power down the device */
+	tsl2550_set_power_state(client, 0);
+
+	kfree(i2c_get_clientdata(client));
+
+	return 0;
+}
+
+static struct i2c_driver tsl2550_driver = {
+	.driver = {
+		.name	= TSL2550_DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= tsl2550_probe,
+	.remove	= __devexit_p(tsl2550_remove),
+};
+
+static int __init tsl2550_init(void)
+{
+	return i2c_add_driver(&tsl2550_driver);
+}
+
+static void __exit tsl2550_exit(void)
+{
+	i2c_del_driver(&tsl2550_driver);
+}
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("TSL2550 ambient light sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+
+module_init(tsl2550_init);
+module_exit(tsl2550_exit);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 435925eba437..6971a62397db 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -207,6 +207,7 @@ EXPORT_SYMBOL_GPL(i2c_bus_type);
  * i2c_new_device - instantiate an i2c device for use with a new style driver
  * @adap: the adapter managing the device
  * @info: describes one I2C device; bus_num is ignored
+ * Context: can sleep
  *
  * Create a device to work with a new style i2c driver, where binding is
  * handled through driver model probe()/remove() methods.  This call is not
@@ -255,6 +256,7 @@ EXPORT_SYMBOL_GPL(i2c_new_device);
 /**
  * i2c_unregister_device - reverse effect of i2c_new_device()
  * @client: value returned from i2c_new_device()
+ * Context: can sleep
  */
 void i2c_unregister_device(struct i2c_client *client)
 {
@@ -379,6 +381,7 @@ out_list:
 /**
  * i2c_add_adapter - declare i2c adapter, use dynamic bus number
  * @adapter: the adapter to add
+ * Context: can sleep
  *
  * This routine is used to declare an I2C adapter when its bus number
  * doesn't matter.  Examples: for I2C adapters dynamically added by
@@ -416,6 +419,7 @@ EXPORT_SYMBOL(i2c_add_adapter);
 /**
  * i2c_add_numbered_adapter - declare i2c adapter, use static bus number
  * @adap: the adapter to register (with adap->nr initialized)
+ * Context: can sleep
  *
  * This routine is used to declare an I2C adapter when its bus number
  * matters.  Example: for I2C adapters from system-on-chip CPUs, or
@@ -463,6 +467,14 @@ retry:
 }
 EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
 
+/**
+ * i2c_del_adapter - unregister I2C adapter
+ * @adap: the adapter being unregistered
+ * Context: can sleep
+ *
+ * This unregisters an I2C adapter which was previously registered
+ * by @i2c_add_adapter or @i2c_add_numbered_adapter.
+ */
 int i2c_del_adapter(struct i2c_adapter *adap)
 {
 	struct list_head  *item, *_n;
@@ -598,6 +610,7 @@ EXPORT_SYMBOL(i2c_register_driver);
 /**
  * i2c_del_driver - unregister I2C driver
  * @driver: the driver being unregistered
+ * Context: can sleep
  */
 void i2c_del_driver(struct i2c_driver *driver)
 {
@@ -1331,10 +1344,14 @@ s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command,
 EXPORT_SYMBOL(i2c_smbus_write_block_data);
 
 /* Returns the number of read bytes */
-s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values)
+s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command,
+				  u8 length, u8 *values)
 {
 	union i2c_smbus_data data;
 
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
 	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
 	                      I2C_SMBUS_READ,command,
 	                      I2C_SMBUS_I2C_BLOCK_DATA,&data))
@@ -1455,7 +1472,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 		break;
 	case I2C_SMBUS_I2C_BLOCK_DATA:
 		if (read_write == I2C_SMBUS_READ) {
-			msg[1].len = I2C_SMBUS_BLOCK_MAX;
+			msg[1].len = data->block[0];
 		} else {
 			msg[0].len = data->block[0] + 1;
 			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
@@ -1511,9 +1528,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
 				data->word = msgbuf1[0] | (msgbuf1[1] << 8);
 				break;
 			case I2C_SMBUS_I2C_BLOCK_DATA:
-				/* fixed at 32 for now */
-				data->block[0] = I2C_SMBUS_BLOCK_MAX;
-				for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
+				for (i = 0; i < data->block[0]; i++)
 					data->block[i+1] = msgbuf1[i];
 				break;
 			case I2C_SMBUS_BLOCK_DATA:
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index e7a709710592..64eee9551b22 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -283,6 +283,7 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file,
 		    (data_arg.size != I2C_SMBUS_WORD_DATA) &&
 		    (data_arg.size != I2C_SMBUS_PROC_CALL) &&
 		    (data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
+		    (data_arg.size != I2C_SMBUS_I2C_BLOCK_BROKEN) &&
 		    (data_arg.size != I2C_SMBUS_I2C_BLOCK_DATA) &&
 		    (data_arg.size != I2C_SMBUS_BLOCK_PROC_CALL)) {
 			dev_dbg(&client->adapter->dev,
@@ -329,10 +330,18 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file,
 
 		if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
 		    (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+		    (data_arg.size == I2C_SMBUS_I2C_BLOCK_DATA) ||
 		    (data_arg.read_write == I2C_SMBUS_WRITE)) {
 			if (copy_from_user(&temp, data_arg.data, datasize))
 				return -EFAULT;
 		}
+		if (data_arg.size == I2C_SMBUS_I2C_BLOCK_BROKEN) {
+			/* Convert old I2C block commands to the new
+			   convention. This preserves binary compatibility. */
+			data_arg.size = I2C_SMBUS_I2C_BLOCK_DATA;
+			if (data_arg.read_write == I2C_SMBUS_READ)
+				temp.block[0] = I2C_SMBUS_BLOCK_MAX;
+		}
 		res = i2c_smbus_xfer(client->adapter,client->addr,client->flags,
 		      data_arg.read_write,
 		      data_arg.command,data_arg.size,&temp);
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 66f826252aee..444a0b84f5bd 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -448,23 +448,21 @@ static int icside_dma_test_irq(ide_drive_t *drive)
 			ICS_ARCIN_V6_INTRSTAT_1)) & 1;
 }
 
-static int icside_dma_timeout(ide_drive_t *drive)
+static void icside_dma_timeout(ide_drive_t *drive)
 {
 	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
 
 	if (icside_dma_test_irq(drive))
-		return 0;
+		return;
 
-	ide_dump_status(drive, "DMA timeout",
-		HWIF(drive)->INB(IDE_STATUS_REG));
+	ide_dump_status(drive, "DMA timeout", HWIF(drive)->INB(IDE_STATUS_REG));
 
-	return icside_dma_end(drive);
+	icside_dma_end(drive);
 }
 
-static int icside_dma_lostirq(ide_drive_t *drive)
+static void icside_dma_lost_irq(ide_drive_t *drive)
 {
 	printk(KERN_ERR "%s: IRQ lost\n", drive->name);
-	return 1;
 }
 
 static void icside_dma_init(ide_hwif_t *hwif)
@@ -490,8 +488,8 @@ static void icside_dma_init(ide_hwif_t *hwif)
 	hwif->dma_start		= icside_dma_start;
 	hwif->ide_dma_end	= icside_dma_end;
 	hwif->ide_dma_test_irq	= icside_dma_test_irq;
-	hwif->ide_dma_timeout	= icside_dma_timeout;
-	hwif->ide_dma_lostirq	= icside_dma_lostirq;
+	hwif->dma_timeout	= icside_dma_timeout;
+	hwif->dma_lost_irq	= icside_dma_lost_irq;
 
 	hwif->drives[0].autodma = hwif->autodma;
 	hwif->drives[1].autodma = hwif->autodma;
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index ca0341c05e55..886091bc7db0 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -819,7 +819,7 @@ init_e100_ide (void)
 		hwif->dma_host_off = &cris_dma_off;
 		hwif->dma_host_on = &cris_dma_on;
 		hwif->dma_off_quietly = &cris_dma_off;
-		hwif->udma_four = 0;
+		hwif->cbl = ATA_CBL_PATA40;
 		hwif->ultra_mask = cris_ultra_mask;
 		hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
 		hwif->autodma = 1;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 252ab8295edf..1486eb212ccc 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -481,7 +481,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
 		else
 			printk("  Unknown Error Type: ");
 
-		if (sense->sense_key < ARY_LEN(sense_key_texts))
+		if (sense->sense_key < ARRAY_SIZE(sense_key_texts))
 			s = sense_key_texts[sense->sense_key];
 
 		printk("%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
@@ -491,7 +491,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
 				 sense->ascq);
 			s = buf;
 		} else {
-			int lo = 0, mid, hi = ARY_LEN(sense_data_texts);
+			int lo = 0, mid, hi = ARRAY_SIZE(sense_data_texts);
 			unsigned long key = (sense->sense_key << 16);
 			key |= (sense->asc << 8);
 			if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
@@ -524,7 +524,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
 
 		if (failed_command != NULL) {
 
-			int lo=0, mid, hi= ARY_LEN (packet_command_texts);
+			int lo=0, mid, hi= ARRAY_SIZE(packet_command_texts);
 			s = NULL;
 
 			while (hi > lo) {
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index ad1f2ed14a37..228b29c5d2e4 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -498,8 +498,6 @@ struct cdrom_info {
  * Descriptions of ATAPI error codes.
  */
 
-#define ARY_LEN(a) ((sizeof(a) / sizeof(a[0])))
-
 /* This stuff should be in cdrom.h, since it is now generic... */
 
 /* ATAPI sense keys (from table 140 of ATAPI 2.6) */
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index dc2175c81f5e..b1304a7f3e0a 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -1190,11 +1190,11 @@ static int idedisk_ioctl(struct inode *inode, struct file *file,
 	return generic_ide_ioctl(drive, file, bdev, cmd, arg);
 
 read_val:
-	down(&ide_setting_sem);
+	mutex_lock(&ide_setting_mtx);
 	spin_lock_irqsave(&ide_lock, flags);
 	err = *val;
 	spin_unlock_irqrestore(&ide_lock, flags);
-	up(&ide_setting_sem);
+	mutex_unlock(&ide_setting_mtx);
 	return err >= 0 ? put_user(err, (long __user *)arg) : err;
 
 set_val:
@@ -1204,9 +1204,9 @@ set_val:
 		if (!capable(CAP_SYS_ADMIN))
 			err = -EACCES;
 		else {
-			down(&ide_setting_sem);
+			mutex_lock(&ide_setting_mtx);
 			err = setfunc(drive, arg);
-			up(&ide_setting_sem);
+			mutex_unlock(&ide_setting_mtx);
 		}
 	}
 	return err;
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ead141e2db9e..5fe1d72ab451 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -91,45 +91,45 @@
 
 static const struct drive_list_entry drive_whitelist [] = {
 
-	{ "Micropolis 2112A"	,       "ALL"		},
-	{ "CONNER CTMA 4000"	,       "ALL"		},
-	{ "CONNER CTT8000-A"	,       "ALL"		},
-	{ "ST34342A"		,	"ALL"		},
+	{ "Micropolis 2112A"	,       NULL		},
+	{ "CONNER CTMA 4000"	,       NULL		},
+	{ "CONNER CTT8000-A"	,       NULL		},
+	{ "ST34342A"		,	NULL		},
 	{ NULL			,	NULL		}
 };
 
 static const struct drive_list_entry drive_blacklist [] = {
 
-	{ "WDC AC11000H"	,	"ALL"		},
-	{ "WDC AC22100H"	,	"ALL"		},
-	{ "WDC AC32500H"	,	"ALL"		},
-	{ "WDC AC33100H"	,	"ALL"		},
-	{ "WDC AC31600H"	,	"ALL"		},
+	{ "WDC AC11000H"	,	NULL 		},
+	{ "WDC AC22100H"	,	NULL 		},
+	{ "WDC AC32500H"	,	NULL 		},
+	{ "WDC AC33100H"	,	NULL 		},
+	{ "WDC AC31600H"	,	NULL 		},
 	{ "WDC AC32100H"	,	"24.09P07"	},
 	{ "WDC AC23200L"	,	"21.10N21"	},
-	{ "Compaq CRD-8241B"	,	"ALL"		},
-	{ "CRD-8400B"		,	"ALL"		},
-	{ "CRD-8480B",			"ALL"		},
-	{ "CRD-8482B",			"ALL"		},
- 	{ "CRD-84"		,	"ALL"		},
-	{ "SanDisk SDP3B"	,	"ALL"		},
-	{ "SanDisk SDP3B-64"	,	"ALL"		},
-	{ "SANYO CD-ROM CRD"	,	"ALL"		},
-	{ "HITACHI CDR-8"	,	"ALL"		},
-	{ "HITACHI CDR-8335"	,	"ALL"		},
-	{ "HITACHI CDR-8435"	,	"ALL"		},
-	{ "Toshiba CD-ROM XM-6202B"	,	"ALL"		},
-	{ "TOSHIBA CD-ROM XM-1702BC",	"ALL"		},
-	{ "CD-532E-A"		,	"ALL"		},
-	{ "E-IDE CD-ROM CR-840",	"ALL"		},
-	{ "CD-ROM Drive/F5A",	"ALL"		},
-	{ "WPI CDD-820",		"ALL"		},
-	{ "SAMSUNG CD-ROM SC-148C",	"ALL"		},
-	{ "SAMSUNG CD-ROM SC",	"ALL"		},
-	{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",	"ALL"		},
-	{ "_NEC DV5800A",               "ALL"           },  
+	{ "Compaq CRD-8241B"	,	NULL 		},
+	{ "CRD-8400B"		,	NULL 		},
+	{ "CRD-8480B",			NULL 		},
+	{ "CRD-8482B",			NULL 		},
+	{ "CRD-84"		,	NULL 		},
+	{ "SanDisk SDP3B"	,	NULL 		},
+	{ "SanDisk SDP3B-64"	,	NULL 		},
+	{ "SANYO CD-ROM CRD"	,	NULL 		},
+	{ "HITACHI CDR-8"	,	NULL 		},
+	{ "HITACHI CDR-8335"	,	NULL 		},
+	{ "HITACHI CDR-8435"	,	NULL 		},
+	{ "Toshiba CD-ROM XM-6202B"	,	NULL 		},
+	{ "TOSHIBA CD-ROM XM-1702BC",	NULL 		},
+	{ "CD-532E-A"		,	NULL 		},
+	{ "E-IDE CD-ROM CR-840",	NULL 		},
+	{ "CD-ROM Drive/F5A",	NULL 		},
+	{ "WPI CDD-820",		NULL 		},
+	{ "SAMSUNG CD-ROM SC-148C",	NULL 		},
+	{ "SAMSUNG CD-ROM SC",	NULL 		},
+	{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",	NULL 		},
+	{ "_NEC DV5800A",               NULL            },
 	{ "SAMSUNG CD-ROM SN-124",	"N001" },
-	{ "Seagate STT20000A",		"ALL" },
+	{ "Seagate STT20000A",		NULL  },
 	{ NULL			,	NULL		}
 
 };
@@ -147,8 +147,8 @@ int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *driv
 {
 	for ( ; drive_table->id_model ; drive_table++)
 		if ((!strcmp(drive_table->id_model, id->model)) &&
-		    ((strstr(id->fw_rev, drive_table->id_firmware)) ||
-		     (!strcmp(drive_table->id_firmware, "ALL"))))
+		    (!drive_table->id_firmware ||
+		     strstr(id->fw_rev, drive_table->id_firmware)))
 			return 1;
 	return 0;
 }
@@ -702,8 +702,22 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
 			mask = id->dma_mword & hwif->mwdma_mask;
 		break;
 	case XFER_SW_DMA_0:
-		if (id->field_valid & 2)
+		if (id->field_valid & 2) {
 			mask = id->dma_1word & hwif->swdma_mask;
+		} else if (id->tDMA) {
+			/*
+			 * ide_fix_driveid() doesn't convert ->tDMA to the
+			 * CPU endianness so we need to do it here
+			 */
+			u8 mode = le16_to_cpu(id->tDMA);
+
+			/*
+			 * if the mode is valid convert it to the mask
+			 * (the maximum allowed mode is XFER_SW_DMA_2)
+			 */
+			if (mode <= 2)
+				mask = ((2 << mode) - 1) & hwif->swdma_mask;
+		}
 		break;
 	default:
 		BUG();
@@ -847,27 +861,27 @@ int ide_set_dma(ide_drive_t *drive)
 	return rc;
 }
 
-EXPORT_SYMBOL_GPL(ide_set_dma);
-
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
-int __ide_dma_lostirq (ide_drive_t *drive)
+void ide_dma_lost_irq (ide_drive_t *drive)
 {
 	printk("%s: DMA interrupt recovery\n", drive->name);
-	return 1;
 }
 
-EXPORT_SYMBOL(__ide_dma_lostirq);
+EXPORT_SYMBOL(ide_dma_lost_irq);
 
-int __ide_dma_timeout (ide_drive_t *drive)
+void ide_dma_timeout (ide_drive_t *drive)
 {
+	ide_hwif_t *hwif = HWIF(drive);
+
 	printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name);
-	if (HWIF(drive)->ide_dma_test_irq(drive))
-		return 0;
 
-	return HWIF(drive)->ide_dma_end(drive);
+	if (hwif->ide_dma_test_irq(drive))
+		return;
+
+	hwif->ide_dma_end(drive);
 }
 
-EXPORT_SYMBOL(__ide_dma_timeout);
+EXPORT_SYMBOL(ide_dma_timeout);
 
 /*
  * Needed for allowing full modular support of ide-driver
@@ -1018,10 +1032,10 @@ void ide_setup_dma (ide_hwif_t *hwif, unsigned long dma_base, unsigned int num_p
 		hwif->ide_dma_end = &__ide_dma_end;
 	if (!hwif->ide_dma_test_irq)
 		hwif->ide_dma_test_irq = &__ide_dma_test_irq;
-	if (!hwif->ide_dma_timeout)
-		hwif->ide_dma_timeout = &__ide_dma_timeout;
-	if (!hwif->ide_dma_lostirq)
-		hwif->ide_dma_lostirq = &__ide_dma_lostirq;
+	if (!hwif->dma_timeout)
+		hwif->dma_timeout = &ide_dma_timeout;
+	if (!hwif->dma_lost_irq)
+		hwif->dma_lost_irq = &ide_dma_lost_irq;
 
 	if (hwif->chipset != ide_trm290) {
 		u8 dma_stat = hwif->INB(hwif->dma_status);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index bfe8f1b712ba..c5b5011da56e 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -1350,7 +1350,7 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
 						hwif->INB(IDE_STATUS_REG));
 	} else {
 		printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
-		(void) hwif->ide_dma_timeout(drive);
+		hwif->dma_timeout(drive);
 	}
 
 	/*
@@ -1466,7 +1466,7 @@ void ide_timer_expiry (unsigned long data)
 				startstop = handler(drive);
 			} else if (drive_is_ready(drive)) {
 				if (drive->waiting_for_dma)
-					(void) hwgroup->hwif->ide_dma_lostirq(drive);
+					hwgroup->hwif->dma_lost_irq(drive);
 				(void)ide_ack_intr(hwif);
 				printk(KERN_WARNING "%s: lost interrupt\n", drive->name);
 				startstop = handler(drive);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index f0be5f665a0e..92578b6832e9 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -574,7 +574,10 @@ u8 eighty_ninty_three (ide_drive_t *drive)
 	ide_hwif_t *hwif = drive->hwif;
 	struct hd_driveid *id = drive->id;
 
-	if (hwif->udma_four == 0)
+	if (hwif->cbl == ATA_CBL_PATA40_SHORT)
+		return 1;
+
+	if (hwif->cbl != ATA_CBL_PATA80)
 		goto no_80w;
 
 	/* Check for SATA but only if we are ATA5 or higher */
@@ -600,7 +603,8 @@ no_80w:
 
 	printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
 			    "limiting max speed to UDMA33\n",
-			    drive->name, hwif->udma_four ? "drive" : "host");
+			    drive->name,
+			    hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host");
 
 	drive->udma33_warned = 1;
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index f5ce22c38f82..cc5801399467 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -144,7 +144,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 	local_irq_enable();
 	ide_fix_driveid(id);
 
-#if defined (CONFIG_SCSI_EATA_DMA) || defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
+#if defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
 	/*
 	 * EATA SCSI controllers do a hardware ATA emulation:
 	 * Ignore them if there is a driver for them available.
@@ -154,7 +154,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 		printk("%s: EATA SCSI HBA %.10s\n", drive->name, id->model);
 		goto err_misc;
 	}
-#endif /* CONFIG_SCSI_EATA_DMA || CONFIG_SCSI_EATA_PIO */
+#endif /* CONFIG_SCSI_EATA || CONFIG_SCSI_EATA_PIO */
 
 	/*
 	 *  WIN_IDENTIFY returns little-endian info,
@@ -1025,7 +1025,7 @@ static int init_irq (ide_hwif_t *hwif)
 	BUG_ON(irqs_disabled());	
 	BUG_ON(hwif == NULL);
 
-	down(&ide_cfg_sem);
+	mutex_lock(&ide_cfg_mtx);
 	hwif->hwgroup = NULL;
 #if MAX_HWIFS > 1
 	/*
@@ -1154,7 +1154,7 @@ static int init_irq (ide_hwif_t *hwif)
 		printk(" (%sed with %s)",
 			hwif->sharing_irq ? "shar" : "serializ", match->name);
 	printk("\n");
-	up(&ide_cfg_sem);
+	mutex_unlock(&ide_cfg_mtx);
 	return 0;
 out_unlink:
 	spin_lock_irq(&ide_lock);
@@ -1177,7 +1177,7 @@ out_unlink:
 	}
 	spin_unlock_irq(&ide_lock);
 out_up:
-	up(&ide_cfg_sem);
+	mutex_unlock(&ide_cfg_mtx);
 	return 1;
 }
 
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index ea94c9aa1220..fc1d8ae6a803 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -156,7 +156,7 @@ static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int d
 {
 	ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL;
 
-	down(&ide_setting_sem);
+	mutex_lock(&ide_setting_mtx);
 	while ((*p) && strcmp((*p)->name, name) < 0)
 		p = &((*p)->next);
 	if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL)
@@ -177,10 +177,10 @@ static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int d
 	if (auto_remove)
 		setting->auto_remove = 1;
 	*p = setting;
-	up(&ide_setting_sem);
+	mutex_unlock(&ide_setting_mtx);
 	return 0;
 abort:
-	up(&ide_setting_sem);
+	mutex_unlock(&ide_setting_mtx);
 	kfree(setting);
 	return -1;
 }
@@ -224,7 +224,7 @@ static void __ide_remove_setting (ide_drive_t *drive, char *name)
  *
  *	Automatically remove all the driver specific settings for this
  *	drive. This function may not be called from IRQ context. The
- *	caller must hold ide_setting_sem.
+ *	caller must hold ide_setting_mtx.
  */
 
 static void auto_remove_settings (ide_drive_t *drive)
@@ -269,7 +269,7 @@ static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name)
  *	@setting: drive setting
  *
  *	Read a drive setting and return the value. The caller
- *	must hold the ide_setting_sem when making this call.
+ *	must hold the ide_setting_mtx when making this call.
  *
  *	BUGS: the data return and error are the same return value
  *	so an error -EINVAL and true return of the same value cannot
@@ -306,7 +306,7 @@ static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting)
  *	@val: value
  *
  *	Write a drive setting if it is possible. The caller
- *	must hold the ide_setting_sem when making this call.
+ *	must hold the ide_setting_mtx when making this call.
  *
  *	BUGS: the data return and error are the same return value
  *	so an error -EINVAL and true return of the same value cannot
@@ -367,7 +367,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)
  *	@drive: drive being configured
  *
  *	Add the generic parts of the system settings to the /proc files.
- *	The caller must not be holding the ide_setting_sem.
+ *	The caller must not be holding the ide_setting_mtx.
  */
 
 void ide_add_generic_settings (ide_drive_t *drive)
@@ -408,7 +408,7 @@ static int proc_ide_read_settings
 
 	proc_ide_settings_warn();
 
-	down(&ide_setting_sem);
+	mutex_lock(&ide_setting_mtx);
 	out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n");
 	out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n");
 	while(setting) {
@@ -428,7 +428,7 @@ static int proc_ide_read_settings
 		setting = setting->next;
 	}
 	len = out - page;
-	up(&ide_setting_sem);
+	mutex_unlock(&ide_setting_mtx);
 	PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
 }
 
@@ -508,16 +508,16 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer,
 				++p;
 			}
 
-			down(&ide_setting_sem);
+			mutex_lock(&ide_setting_mtx);
 			setting = ide_find_setting_by_name(drive, name);
 			if (!setting)
 			{
-				up(&ide_setting_sem);
+				mutex_unlock(&ide_setting_mtx);
 				goto parse_error;
 			}
 			if (for_real)
 				ide_write_setting(drive, setting, val * setting->div_factor / setting->mul_factor);
-			up(&ide_setting_sem);
+			mutex_unlock(&ide_setting_mtx);
 		}
 	} while (!for_real++);
 	free_page((unsigned long)buf);
@@ -705,7 +705,7 @@ EXPORT_SYMBOL(ide_proc_register_driver);
  *	Clean up the driver specific /proc files and IDE settings
  *	for a given drive.
  *
- *	Takes ide_setting_sem and ide_lock.
+ *	Takes ide_setting_mtx and ide_lock.
  *	Caller must hold none of the locks.
  */
 
@@ -715,10 +715,10 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
 
 	ide_remove_proc_entries(drive->proc, driver->proc);
 
-	down(&ide_setting_sem);
+	mutex_lock(&ide_setting_mtx);
 	spin_lock_irqsave(&ide_lock, flags);
 	/*
-	 * ide_setting_sem protects the settings list
+	 * ide_setting_mtx protects the settings list
 	 * ide_lock protects the use of settings
 	 *
 	 * so we need to hold both, ide_settings_sem because we want to
@@ -726,11 +726,11 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
 	 * a setting out that is being used.
 	 *
 	 * OTOH both ide_{read,write}_setting are only ever used under
-	 * ide_setting_sem.
+	 * ide_setting_mtx.
 	 */
 	auto_remove_settings(drive);
 	spin_unlock_irqrestore(&ide_lock, flags);
-	up(&ide_setting_sem);
+	mutex_unlock(&ide_setting_mtx);
 }
 
 EXPORT_SYMBOL(ide_proc_unregister_driver);
diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h
index c0864b1e9228..e6cb8593b5ba 100644
--- a/drivers/ide/ide-timing.h
+++ b/drivers/ide/ide-timing.h
@@ -102,66 +102,16 @@ static struct ide_timing ide_timing[] = {
 #define EZ(v,unit)		((v)?ENOUGH(v,unit):0)
 
 #define XFER_MODE	0xf0
-#define XFER_UDMA_133	0x48
-#define XFER_UDMA_100	0x44
-#define XFER_UDMA_66	0x42
-#define XFER_UDMA	0x40
 #define XFER_MWDMA	0x20
-#define XFER_SWDMA	0x10
 #define XFER_EPIO	0x01
 #define XFER_PIO	0x00
 
-static short ide_find_best_mode(ide_drive_t *drive, int map)
+static short ide_find_best_pio_mode(ide_drive_t *drive)
 {
 	struct hd_driveid *id = drive->id;
 	short best = 0;
 
-	if (!id)
-		return XFER_PIO_SLOW;
-
-	if ((map & XFER_UDMA) && (id->field_valid & 4)) {	/* Want UDMA and UDMA bitmap valid */
-
-		if ((map & XFER_UDMA_133) == XFER_UDMA_133)
-			if ((best = (id->dma_ultra & 0x0040) ? XFER_UDMA_6 : 0)) return best;
-
-		if ((map & XFER_UDMA_100) == XFER_UDMA_100)
-			if ((best = (id->dma_ultra & 0x0020) ? XFER_UDMA_5 : 0)) return best;
-
-		if ((map & XFER_UDMA_66) == XFER_UDMA_66)
-			if ((best = (id->dma_ultra & 0x0010) ? XFER_UDMA_4 :
-                	    	    (id->dma_ultra & 0x0008) ? XFER_UDMA_3 : 0)) return best;
-
-                if ((best = (id->dma_ultra & 0x0004) ? XFER_UDMA_2 :
-                	    (id->dma_ultra & 0x0002) ? XFER_UDMA_1 :
-                	    (id->dma_ultra & 0x0001) ? XFER_UDMA_0 : 0)) return best;
-	}
-
-	if ((map & XFER_MWDMA) && (id->field_valid & 2)) {	/* Want MWDMA and drive has EIDE fields */
-
-		if ((best = (id->dma_mword & 0x0004) ? XFER_MW_DMA_2 :
-                	    (id->dma_mword & 0x0002) ? XFER_MW_DMA_1 :
-                	    (id->dma_mword & 0x0001) ? XFER_MW_DMA_0 : 0)) return best;
-	}
-
-	if (map & XFER_SWDMA) {					/* Want SWDMA */
-
- 		if (id->field_valid & 2) {			/* EIDE SWDMA */
-
-			if ((best = (id->dma_1word & 0x0004) ? XFER_SW_DMA_2 :
-      				    (id->dma_1word & 0x0002) ? XFER_SW_DMA_1 :
-				    (id->dma_1word & 0x0001) ? XFER_SW_DMA_0 : 0)) return best;
-		}
-
-		if (id->capability & 1) {			/* Pre-EIDE style SWDMA */
-
-			if ((best = (id->tDMA == 2) ? XFER_SW_DMA_2 :
-				    (id->tDMA == 1) ? XFER_SW_DMA_1 :
-				    (id->tDMA == 0) ? XFER_SW_DMA_0 : 0)) return best;
-		}
-	}
-
-
-	if ((map & XFER_EPIO) && (id->field_valid & 2)) {	/* EIDE PIO modes */
+	if (id->field_valid & 2) {	/* EIDE PIO modes */
 
 		if ((best = (drive->id->eide_pio_modes & 4) ? XFER_PIO_5 :
 			    (drive->id->eide_pio_modes & 2) ? XFER_PIO_4 :
@@ -262,7 +212,7 @@ static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing
  */
 
 	if ((speed & XFER_MODE) != XFER_PIO) {
-		ide_timing_compute(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO), &p, T, UT);
+		ide_timing_compute(drive, ide_find_best_pio_mode(drive), &p, T, UT);
 		ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
 	}
 
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 0cd76bf66833..c948a5c17a5d 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -169,7 +169,7 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
 static int idebus_parameter;	/* holds the "idebus=" parameter */
 static int system_bus_speed;	/* holds what we think is VESA/PCI bus speed */
 
-DECLARE_MUTEX(ide_cfg_sem);
+DEFINE_MUTEX(ide_cfg_mtx);
  __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
 
 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
@@ -460,6 +460,8 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 	hwif->mwdma_mask		= tmp_hwif->mwdma_mask;
 	hwif->swdma_mask		= tmp_hwif->swdma_mask;
 
+	hwif->cbl			= tmp_hwif->cbl;
+
 	hwif->chipset			= tmp_hwif->chipset;
 	hwif->hold			= tmp_hwif->hold;
 
@@ -496,8 +498,8 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 	hwif->ide_dma_clear_irq		= tmp_hwif->ide_dma_clear_irq;
 	hwif->dma_host_on		= tmp_hwif->dma_host_on;
 	hwif->dma_host_off		= tmp_hwif->dma_host_off;
-	hwif->ide_dma_lostirq		= tmp_hwif->ide_dma_lostirq;
-	hwif->ide_dma_timeout		= tmp_hwif->ide_dma_timeout;
+	hwif->dma_lost_irq		= tmp_hwif->dma_lost_irq;
+	hwif->dma_timeout		= tmp_hwif->dma_timeout;
 
 	hwif->OUTB			= tmp_hwif->OUTB;
 	hwif->OUTBSYNC			= tmp_hwif->OUTBSYNC;
@@ -533,7 +535,6 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
 	hwif->extra_base		= tmp_hwif->extra_base;
 	hwif->extra_ports		= tmp_hwif->extra_ports;
 	hwif->autodma			= tmp_hwif->autodma;
-	hwif->udma_four			= tmp_hwif->udma_four;
 
 	hwif->hwif_data			= tmp_hwif->hwif_data;
 }
@@ -564,7 +565,7 @@ void ide_unregister(unsigned int index)
 {
 	ide_drive_t *drive;
 	ide_hwif_t *hwif, *g;
-	static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */
+	static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */
 	ide_hwgroup_t *hwgroup;
 	int irq_count = 0, unit;
 
@@ -572,7 +573,7 @@ void ide_unregister(unsigned int index)
 
 	BUG_ON(in_interrupt());
 	BUG_ON(irqs_disabled());
-	down(&ide_cfg_sem);
+	mutex_lock(&ide_cfg_mtx);
 	spin_lock_irq(&ide_lock);
 	hwif = &ide_hwifs[index];
 	if (!hwif->present)
@@ -679,7 +680,7 @@ void ide_unregister(unsigned int index)
 
 abort:
 	spin_unlock_irq(&ide_lock);
-	up(&ide_cfg_sem);
+	mutex_unlock(&ide_cfg_mtx);
 }
 
 EXPORT_SYMBOL(ide_unregister);
@@ -817,9 +818,9 @@ EXPORT_SYMBOL(ide_register_hw);
  *	Locks for IDE setting functionality
  */
 
-DECLARE_MUTEX(ide_setting_sem);
+DEFINE_MUTEX(ide_setting_mtx);
 
-EXPORT_SYMBOL_GPL(ide_setting_sem);
+EXPORT_SYMBOL_GPL(ide_setting_mtx);
 
 /**
  *	ide_spin_wait_hwgroup	-	wait for group
@@ -1192,11 +1193,11 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
 	}
 
 read_val:
-	down(&ide_setting_sem);
+	mutex_lock(&ide_setting_mtx);
 	spin_lock_irqsave(&ide_lock, flags);
 	err = *val;
 	spin_unlock_irqrestore(&ide_lock, flags);
-	up(&ide_setting_sem);
+	mutex_unlock(&ide_setting_mtx);
 	return err >= 0 ? put_user(err, (long __user *)arg) : err;
 
 set_val:
@@ -1206,9 +1207,9 @@ set_val:
 		if (!capable(CAP_SYS_ADMIN))
 			err = -EACCES;
 		else {
-			down(&ide_setting_sem);
+			mutex_lock(&ide_setting_mtx);
 			err = setfunc(drive, arg);
-			up(&ide_setting_sem);
+			mutex_unlock(&ide_setting_mtx);
 		}
 	}
 	return err;
@@ -1548,7 +1549,11 @@ static int __init ide_setup(char *s)
 				goto bad_option;
 			case -7: /* ata66 */
 #ifdef CONFIG_BLK_DEV_IDEPCI
-				hwif->udma_four = 1;
+				/*
+				 * Use ATA_CBL_PATA40_SHORT so drive side
+				 * cable detection is also overriden.
+				 */
+				hwif->cbl = ATA_CBL_PATA40_SHORT;
 				goto obsolete_option;
 #else
 				goto bad_hwif;
diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c
index 45ed03591cd8..8f2db8dd35f7 100644
--- a/drivers/ide/legacy/hd.c
+++ b/drivers/ide/legacy/hd.c
@@ -130,7 +130,7 @@ struct hd_i_struct {
 	
 #ifdef HD_TYPE
 static struct hd_i_struct hd_info[] = { HD_TYPE };
-static int NR_HD = ((sizeof (hd_info))/(sizeof (struct hd_i_struct)));
+static int NR_HD = ARRAY_SIZE(hd_info);
 #else
 static struct hd_i_struct hd_info[MAX_HD];
 static int NR_HD;
@@ -623,7 +623,8 @@ repeat:
 	cyl   = track / disk->head;
 #ifdef DEBUG
 	printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n",
-		req->rq_disk->disk_name, (req->cmd == READ)?"read":"writ",
+		req->rq_disk->disk_name,
+		req_data_dir(req) == READ ? "read" : "writ",
 		cyl, head, sec, nsect, req->buffer);
 #endif
 	if (blk_fs_request(req)) {
@@ -718,74 +719,25 @@ static int __init hd_init(void)
 	device_timer.function = hd_times_out;
 	blk_queue_hardsect_size(hd_queue, 512);
 
-#ifdef __i386__
 	if (!NR_HD) {
-		extern struct drive_info drive_info;
-		unsigned char *BIOS = (unsigned char *) &drive_info;
-		unsigned long flags;
-		int cmos_disks;
-
-		for (drive=0 ; drive<2 ; drive++) {
-			hd_info[drive].cyl = *(unsigned short *) BIOS;
-			hd_info[drive].head = *(2+BIOS);
-			hd_info[drive].wpcom = *(unsigned short *) (5+BIOS);
-			hd_info[drive].ctl = *(8+BIOS);
-			hd_info[drive].lzone = *(unsigned short *) (12+BIOS);
-			hd_info[drive].sect = *(14+BIOS);
-#ifdef does_not_work_for_everybody_with_scsi_but_helps_ibm_vp
-			if (hd_info[drive].cyl && NR_HD == drive)
-				NR_HD++;
-#endif
-			BIOS += 16;
-		}
-
-	/*
-		We query CMOS about hard disks : it could be that 
-		we have a SCSI/ESDI/etc controller that is BIOS
-		compatible with ST-506, and thus showing up in our
-		BIOS table, but not register compatible, and therefore
-		not present in CMOS.
-
-		Furthermore, we will assume that our ST-506 drives
-		<if any> are the primary drives in the system, and 
-		the ones reflected as drive 1 or 2.
-
-		The first drive is stored in the high nibble of CMOS
-		byte 0x12, the second in the low nibble.  This will be
-		either a 4 bit drive type or 0xf indicating use byte 0x19 
-		for an 8 bit type, drive 1, 0x1a for drive 2 in CMOS.
-
-		Needless to say, a non-zero value means we have 
-		an AT controller hard disk for that drive.
-
-		Currently the rtc_lock is a bit academic since this
-		driver is non-modular, but someday... ?         Paul G.
-	*/
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		cmos_disks = CMOS_READ(0x12);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-
-		if (cmos_disks & 0xf0) {
-			if (cmos_disks & 0x0f)
-				NR_HD = 2;
-			else
-				NR_HD = 1;
-		}
-	}
-#endif /* __i386__ */
-#ifdef __arm__
-	if (!NR_HD) {
-		/* We don't know anything about the drive.  This means
+		/*
+		 * We don't know anything about the drive.  This means
 		 * that you *MUST* specify the drive parameters to the
 		 * kernel yourself.
+		 *
+		 * If we were on an i386, we used to read this info from
+		 * the BIOS or CMOS.  This doesn't work all that well,
+		 * since this assumes that this is a primary or secondary
+		 * drive, and if we're using this legacy driver, it's
+		 * probably an auxilliary controller added to recover
+		 * legacy data off an ST-506 drive.  Either way, it's
+		 * definitely safest to have the user explicitly specify
+		 * the information.
 		 */
 		printk("hd: no drives specified - use hd=cyl,head,sectors"
 			" on kernel command line\n");
-	}
-#endif
-	if (!NR_HD)
 		goto out;
+	}
 
 	for (drive=0 ; drive < NR_HD ; drive++) {
 		struct gendisk *disk = alloc_disk(64);
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index c211fc78345d..b557c45a5a9d 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -77,15 +77,6 @@ int macide_ack_intr(ide_hwif_t* hwif)
 	return 0;
 }
 
-#ifdef CONFIG_BLK_DEV_MAC_MEDIABAY
-static void macide_mediabay_interrupt(int irq, void *dev_id)
-{
-	int state = baboon->mb_status & 0x04;
-
-	printk(KERN_INFO "macide: media bay %s detected\n", state? "removal":"insertion");
-}
-#endif
-
 /*
  * Probe for a Macintosh IDE interface
  */
@@ -128,11 +119,6 @@ void macide_init(void)
 			ide_drive_t *drive = &ide_hwifs[index].drives[0];
 			drive->capacity64 = drive->cyl*drive->head*drive->sect;
 
-#ifdef CONFIG_BLK_DEV_MAC_MEDIABAY
-			request_irq(IRQ_BABOON_2, macide_mediabay_interrupt,
-					IRQ_FLG_FAST, "mediabay",
-					macide_mediabay_interrupt);
-#endif
 		}
 		break;
 
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index ca95e990862e..2e7013a2a7f6 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -381,9 +381,7 @@ static int auide_dma_setup(ide_drive_t *drive)
 
 static int auide_dma_check(ide_drive_t *drive)
 {
-	u8 speed;
-
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+	u8 speed = ide_max_dma_mode(drive);
 
 	if( dbdma_init_done == 0 ){
 		auide_hwif.white_list = ide_in_drive_list(drive->id,
@@ -394,7 +392,6 @@ static int auide_dma_check(ide_drive_t *drive)
 		auide_ddma_init(&auide_hwif);
 		dbdma_init_done = 1;
 	}
-#endif
 
 	/* Is the drive in our DMA black list? */
 
@@ -409,8 +406,6 @@ static int auide_dma_check(ide_drive_t *drive)
 	else
 		drive->using_dma = 1;
 
-	speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA);
-	
 	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
 		return 0;
 
@@ -456,10 +451,9 @@ static void auide_dma_off_quietly(ide_drive_t *drive)
 	drive->using_dma = 0;
 }
 
-static int auide_dma_lostirq(ide_drive_t *drive)
+static void auide_dma_lost_irq(ide_drive_t *drive)
 {
 	printk(KERN_ERR "%s: IRQ lost\n", drive->name);
-	return 0;
 }
 
 static void auide_ddma_tx_callback(int irq, void *param)
@@ -489,16 +483,16 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de
   
 #if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
 
-static int auide_dma_timeout(ide_drive_t *drive)
+static void auide_dma_timeout(ide_drive_t *drive)
 {
-//      printk("%s\n", __FUNCTION__);
+	ide_hwif_t *hwif = HWIF(drive);
 
 	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
 
-	if (HWIF(drive)->ide_dma_test_irq(drive))
-		return 0;
+	if (hwif->ide_dma_test_irq(drive))
+		return;
 
-	return HWIF(drive)->ide_dma_end(drive);
+	hwif->ide_dma_end(drive);
 }
 					
 
@@ -721,7 +715,7 @@ static int au_ide_probe(struct device *dev)
 
 #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
 	hwif->dma_off_quietly		= &auide_dma_off_quietly;
-	hwif->ide_dma_timeout           = &auide_dma_timeout;
+	hwif->dma_timeout		= &auide_dma_timeout;
 
 	hwif->ide_dma_check             = &auide_dma_check;
 	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
@@ -731,7 +725,7 @@ static int au_ide_probe(struct device *dev)
 	hwif->ide_dma_test_irq          = &auide_dma_test_irq;
 	hwif->dma_host_off		= &auide_dma_host_off;
 	hwif->dma_host_on		= &auide_dma_host_on;
-	hwif->ide_dma_lostirq           = &auide_dma_lostirq;
+	hwif->dma_lost_irq		= &auide_dma_lost_irq;
 	hwif->ide_dma_on                = &auide_dma_on;
 
 	hwif->autodma                   = 1;
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index b173bc66ce1e..e5d09367627e 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/aec62xx.c		Version 0.21	Apr 21, 2007
+ * linux/drivers/ide/pci/aec62xx.c		Version 0.24	May 24, 2007
  *
  * Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2007		MontaVista Software, Inc. <source@mvista.com>
@@ -140,25 +140,10 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 	return(ide_config_drive_speed(drive, speed));
 }
 
-static int aec62xx_tune_chipset (ide_drive_t *drive, u8 speed)
-{
-	switch (HWIF(drive)->pci_dev->device) {
-		case PCI_DEVICE_ID_ARTOP_ATP865:
-		case PCI_DEVICE_ID_ARTOP_ATP865R:
-		case PCI_DEVICE_ID_ARTOP_ATP860:
-		case PCI_DEVICE_ID_ARTOP_ATP860R:
-			return ((int) aec6260_tune_chipset(drive, speed));
-		case PCI_DEVICE_ID_ARTOP_ATP850UF:
-			return ((int) aec6210_tune_chipset(drive, speed));
-		default:
-			return -1;
-	}
-}
-
 static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
 {
 	pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
-	(void) aec62xx_tune_chipset(drive, pio + XFER_PIO_0);
+	(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
 }
 
 static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
@@ -172,12 +157,9 @@ static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
 	return -1;
 }
 
-static int aec62xx_irq_timeout (ide_drive_t *drive)
+static void aec62xx_dma_lost_irq (ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= hwif->pci_dev;
-
-	switch(dev->device) {
+	switch (HWIF(drive)->pci_dev->device) {
 		case PCI_DEVICE_ID_ARTOP_ATP860:
 		case PCI_DEVICE_ID_ARTOP_ATP860R:
 		case PCI_DEVICE_ID_ARTOP_ATP865:
@@ -186,7 +168,6 @@ static int aec62xx_irq_timeout (ide_drive_t *drive)
 		default:
 			break;
 	}
-	return 0;
 }
 
 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
@@ -224,64 +205,46 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 
 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = hwif->pci_dev;
+	struct pci_dev *dev	= hwif->pci_dev;
+	u8 reg54 = 0,  mask	= hwif->channel ? 0xf0 : 0x0f;
+	unsigned long flags;
 
-	hwif->autodma = 0;
 	hwif->tuneproc = &aec62xx_tune_drive;
-	hwif->speedproc = &aec62xx_tune_chipset;
 
-	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
-		hwif->serialized = hwif->channel;
-
-	if (hwif->mate)
-		hwif->mate->serialized = hwif->serialized;
+	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
+		if(hwif->mate)
+			hwif->mate->serialized = hwif->serialized = 1;
+		hwif->speedproc = &aec6210_tune_chipset;
+	} else
+		hwif->speedproc = &aec6260_tune_chipset;
 
 	if (!hwif->dma_base) {
-		hwif->drives[0].autotune = 1;
-		hwif->drives[1].autotune = 1;
+		hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
 		return;
 	}
 
 	hwif->ultra_mask = hwif->cds->udma_mask;
-
-	/* atp865 and atp865r */
-	if (hwif->ultra_mask == 0x3f) {
-		/* check bit 0x10 of DMA status register */
-		if (inb(pci_resource_start(dev, 4) + 2) & 0x10)
- 			hwif->ultra_mask = 0x7f; /* udma0-6 */
-	}
-
 	hwif->mwdma_mask = 0x07;
 
 	hwif->ide_dma_check	= &aec62xx_config_drive_xfer_rate;
-	hwif->ide_dma_lostirq	= &aec62xx_irq_timeout;
-
-	if (!noautodma)
-		hwif->autodma = 1;
-	hwif->drives[0].autodma = hwif->autodma;
-	hwif->drives[1].autodma = hwif->autodma;
-}
-
-static void __devinit init_dma_aec62xx(ide_hwif_t *hwif, unsigned long dmabase)
-{
-	struct pci_dev *dev	= hwif->pci_dev;
+	hwif->dma_lost_irq	= &aec62xx_dma_lost_irq;
 
 	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
-		u8 reg54h = 0;
-		unsigned long flags;
-
 		spin_lock_irqsave(&ide_lock, flags);
-		pci_read_config_byte(dev, 0x54, &reg54h);
-		pci_write_config_byte(dev, 0x54, reg54h & ~(hwif->channel ? 0xF0 : 0x0F));
+		pci_read_config_byte (dev, 0x54, &reg54);
+		pci_write_config_byte(dev, 0x54, (reg54 & ~mask));
 		spin_unlock_irqrestore(&ide_lock, flags);
-	} else {
-		u8 ata66	= 0;
+	} else if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
+		u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
 		pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
-	        if (!(hwif->udma_four))
-			hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1;
+
+		hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 	}
 
-	ide_setup_dma(hwif, dmabase, 8);
+	if (!noautodma)
+		hwif->autodma = 1;
+	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
 }
 
 static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
@@ -291,16 +254,12 @@ static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d
 
 static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
 {
-	unsigned long bar4reg = pci_resource_start(dev, 4);
-
-	if (inb(bar4reg+2) & 0x10) {
-		strcpy(d->name, "AEC6880");
-		if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
-			strcpy(d->name, "AEC6880R");
-	} else {
-		strcpy(d->name, "AEC6280");
-		if (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)
-			strcpy(d->name, "AEC6280R");
+	unsigned long dma_base = pci_resource_start(dev, 4);
+
+	if (inb(dma_base + 2) & 0x10) {
+		d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ?
+			  "AEC6880R" : "AEC6880";
+		d->udma_mask = 0x7f; /* udma0-6 */
 	}
 
 	return ide_setup_pci_device(dev, d);
@@ -312,7 +271,6 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.init_setup	= init_setup_aec62xx,
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
-		.init_dma	= init_dma_aec62xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
@@ -323,7 +281,6 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.init_setup	= init_setup_aec62xx,
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
-		.init_dma	= init_dma_aec62xx,
 		.channels	= 2,
 		.autodma	= NOAUTODMA,
 		.bootable	= OFF_BOARD,
@@ -333,28 +290,25 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.init_setup	= init_setup_aec62xx,
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
-		.init_dma	= init_dma_aec62xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.bootable	= NEVER_BOARD,
 		.udma_mask	= 0x1f, /* udma0-4 */
 	},{	/* 3 */
-		.name		= "AEC6X80",
+		.name		= "AEC6280",
 		.init_setup	= init_setup_aec6x80,
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
-		.init_dma	= init_dma_aec62xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.bootable	= OFF_BOARD,
 		.udma_mask	= 0x3f, /* udma0-5 */
 	},{	/* 4 */
-		.name		= "AEC6X80R",
+		.name		= "AEC6280R",
 		.init_setup	= init_setup_aec6x80,
 		.init_chipset	= init_chipset_aec62xx,
 		.init_hwif	= init_hwif_aec62xx,
-		.init_dma	= init_dma_aec62xx,
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
@@ -370,13 +324,16 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
  *
  *	Called when the PCI registration layer (or the IDE initialization)
  *	finds a device matching our IDE device tables.
+ *
+ *	NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
+ *	chips, pass a local copy of 'struct pci_device_id' down the call chain.
  */
  
 static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data];
+	ide_pci_device_t d = aec62xx_chipsets[id->driver_data];
 
-	return d->init_setup(dev, d);
+	return d.init_setup(dev, &d);
 }
 
 static struct pci_device_id aec62xx_pci_tbl[] = {
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 27525ec2e19a..ba0fb92b0417 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/alim15x3.c		Version 0.21	2007/02/03
+ * linux/drivers/ide/pci/alim15x3.c		Version 0.25	Jun 9 2007
  *
  *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
  *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
@@ -10,6 +10,7 @@
  *  Copyright (C) 2002 Alan Cox <alan@redhat.com>
  *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
  *  Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
+ *  Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
  *
  *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
  *
@@ -36,6 +37,7 @@
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
+#include <linux/dmi.h>
 
 #include <asm/io.h>
 
@@ -506,7 +508,7 @@ static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const c
 	u8 tmpbyte;
 	struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision);
+	m5229_revision = dev->revision;
 
 	isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
 
@@ -583,6 +585,35 @@ out:
 	return 0;
 }
 
+/*
+ *	Cable special cases
+ */
+
+static struct dmi_system_id cable_dmi_table[] = {
+	{
+		.ident = "HP Pavilion N5430",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"),
+		},
+	},
+	{ }
+};
+
+static int ali_cable_override(struct pci_dev *pdev)
+{
+	/* Fujitsu P2000 */
+	if (pdev->subsystem_vendor == 0x10CF &&
+	    pdev->subsystem_device == 0x10AF)
+		return 1;
+
+	/* Systems by DMI */
+	if (dmi_check_system(cable_dmi_table))
+		return 1;
+
+	return 0;
+}
+
 /**
  *	ata66_ali15x3	-	check for UDMA 66 support
  *	@hwif: IDE interface
@@ -594,37 +625,31 @@ out:
  *	FIXME: frobs bits that are not defined on newer ALi devicea
  */
 
-static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif)
+static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= hwif->pci_dev;
-	unsigned int ata66	= 0;
-	u8 cable_80_pin[2]	= { 0, 0 };
-
 	unsigned long flags;
-	u8 tmpbyte;
+	u8 cbl = ATA_CBL_PATA40, tmpbyte;
 
 	local_irq_save(flags);
 
 	if (m5229_revision >= 0xC2) {
 		/*
-		 * Ultra66 cable detection (from Host View)
-		 * m5229, 0x4a, bit0: primary, bit1: secondary 80 pin
-		 */
-		pci_read_config_byte(dev, 0x4a, &tmpbyte);
-		/*
-		 * 0x4a, bit0 is 0 => primary channel
-		 * has 80-pin (from host view)
-		 */
-		if (!(tmpbyte & 0x01)) cable_80_pin[0] = 1;
-		/*
-		 * 0x4a, bit1 is 0 => secondary channel
-		 * has 80-pin (from host view)
-		 */
-		if (!(tmpbyte & 0x02)) cable_80_pin[1] = 1;
-		/*
-		 * Allow ata66 if cable of current channel has 80 pins
+		 * m5229 80-pin cable detection (from Host View)
+		 *
+		 * 0x4a bit0 is 0 => primary channel has 80-pin
+		 * 0x4a bit1 is 0 => secondary channel has 80-pin
+		 *
+		 * Certain laptops use short but suitable cables
+		 * and don't implement the detect logic.
 		 */
-		ata66 = (hwif->channel)?cable_80_pin[1]:cable_80_pin[0];
+		if (ali_cable_override(dev))
+			cbl = ATA_CBL_PATA40_SHORT;
+		else {
+			pci_read_config_byte(dev, 0x4a, &tmpbyte);
+			if ((tmpbyte & (1 << hwif->channel)) == 0)
+				cbl = ATA_CBL_PATA80;
+		}
 	} else {
 		/*
 		 * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
@@ -657,7 +682,7 @@ static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif)
 
 	local_irq_restore(flags);
 
-	return(ata66);
+	return cbl;
 }
 
 /**
@@ -708,8 +733,9 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
 		hwif->dma_setup = &ali15x3_dma_setup;
 		if (!noautodma)
 			hwif->autodma = 1;
-		if (!(hwif->udma_four))
-			hwif->udma_four = ata66_ali15x3(hwif);
+
+		if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+			hwif->cbl = ata66_ali15x3(hwif);
 	}
 	hwif->drives[0].autodma = hwif->autodma;
 	hwif->drives[1].autodma = hwif->autodma;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index a2be65fcf89c..8d30b99a54d8 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,10 +1,11 @@
 /*
- * Version 2.16
+ * Version 2.20
  *
  * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
  * IDE driver for Linux.
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
+ * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
  *
  * Based on the work of:
  *      Andre Hedrick
@@ -37,11 +38,6 @@
 #define AMD_ADDRESS_SETUP	(0x0c + amd_config->base)
 #define AMD_UDMA_TIMING		(0x10 + amd_config->base)
 
-#define AMD_UDMA		0x07
-#define AMD_UDMA_33		0x01
-#define AMD_UDMA_66		0x02
-#define AMD_UDMA_100		0x03
-#define AMD_UDMA_133		0x04
 #define AMD_CHECK_SWDMA		0x08
 #define AMD_BAD_SWDMA		0x10
 #define AMD_BAD_FIFO		0x20
@@ -53,32 +49,33 @@
 
 static struct amd_ide_chip {
 	unsigned short id;
-	unsigned long base;
-	unsigned char flags;
+	u8 base;
+	u8 udma_mask;
+	u8 flags;
 } amd_ide_chips[] = {
-	{ PCI_DEVICE_ID_AMD_COBRA_7401,		0x40, AMD_UDMA_33 | AMD_BAD_SWDMA },
-	{ PCI_DEVICE_ID_AMD_VIPER_7409,		0x40, AMD_UDMA_66 | AMD_CHECK_SWDMA },
-	{ PCI_DEVICE_ID_AMD_VIPER_7411,		0x40, AMD_UDMA_100 | AMD_BAD_FIFO },
-	{ PCI_DEVICE_ID_AMD_OPUS_7441,		0x40, AMD_UDMA_100 },
-	{ PCI_DEVICE_ID_AMD_8111_IDE,		0x40, AMD_UDMA_133 | AMD_CHECK_SERENADE },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE,	0x50, AMD_UDMA_100 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE,	0x50, AMD_UDMA_133 },
-	{ PCI_DEVICE_ID_AMD_CS5536_IDE,			0x40, AMD_UDMA_100 },
+	{ PCI_DEVICE_ID_AMD_COBRA_7401,		 0x40, ATA_UDMA2, AMD_BAD_SWDMA },
+	{ PCI_DEVICE_ID_AMD_VIPER_7409,		 0x40, ATA_UDMA4, AMD_CHECK_SWDMA },
+	{ PCI_DEVICE_ID_AMD_VIPER_7411,		 0x40, ATA_UDMA5, AMD_BAD_FIFO },
+	{ PCI_DEVICE_ID_AMD_OPUS_7441,		 0x40, ATA_UDMA5, },
+	{ PCI_DEVICE_ID_AMD_8111_IDE,		 0x40, ATA_UDMA6, AMD_CHECK_SERENADE },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE,	 0x50, ATA_UDMA5, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE,	 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE,	 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,	 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE,	 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE,	 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,	 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE, 0x50, ATA_UDMA6, },
+	{ PCI_DEVICE_ID_AMD_CS5536_IDE,		 0x40, ATA_UDMA5, },
 	{ 0 }
 };
 
@@ -87,7 +84,7 @@ static ide_pci_device_t *amd_chipset;
 static unsigned int amd_80w;
 static unsigned int amd_clock;
 
-static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
+static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
 static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
 
 /*
@@ -126,9 +123,8 @@ static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count)
 	amd_print("Driver Version:                     2.13");
 	amd_print("South Bridge:                       %s", pci_name(bmide_dev));
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
-	amd_print("Revision:                           IDE %#x", t);
-	amd_print("Highest DMA rate:                   %s", amd_dma[amd_config->flags & AMD_UDMA]);
+	amd_print("Revision:                           IDE %#x", dev->revision);
+	amd_print("Highest DMA rate:                   UDMA%s", amd_dma[fls(amd_config->udma_mask) - 1]);
 
 	amd_print("BM-DMA base:                        %#lx", amd_base);
 	amd_print("PCI clock:                          %d.%dMHz", amd_clock / 1000, amd_clock / 100 % 10);
@@ -221,12 +217,12 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
 	pci_write_config_byte(dev, AMD_DRIVE_TIMING + (3 - dn),
 		((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
 
-	switch (amd_config->flags & AMD_UDMA) {
-		case AMD_UDMA_33:  t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
-		case AMD_UDMA_66:  t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
-		case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
-		case AMD_UDMA_133: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
-		default: return;
+	switch (amd_config->udma_mask) {
+	case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
+	case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
+	case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
+	case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
+	default: return;
 	}
 
 	pci_write_config_byte(dev, AMD_UDMA_TIMING + (3 - dn), t);
@@ -248,7 +244,7 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed)
 		ide_config_drive_speed(drive, speed);
 
 	T = 1000000000 / amd_clock;
-	UT = T / min_t(int, max_t(int, amd_config->flags & AMD_UDMA, 1), 2);
+	UT = (amd_config->udma_mask == ATA_UDMA2) ? T : (T / 2);
 
 	ide_timing_compute(drive, speed, &t, T, UT);
 
@@ -277,29 +273,19 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed)
 static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
 {
 	if (pio == 255) {
-		amd_set_drive(drive, ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
+		amd_set_drive(drive, ide_find_best_pio_mode(drive));
 		return;
 	}
 
 	amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
 }
 
-/*
- * amd74xx_dmaproc() is a callback from upper layers that can do
- * a lot, but we use it for DMA/PIO tuning only, delegating everything
- * else to the default ide_dmaproc().
- */
-
 static int amd74xx_ide_dma_check(ide_drive_t *drive)
 {
-	int w80 = HWIF(drive)->udma_four;
+	u8 speed = ide_max_dma_mode(drive);
 
-	u8 speed = ide_find_best_mode(drive,
-		XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA |
-		((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) |
-		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) |
-		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0) |
-		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_133 ? XFER_UDMA_133 : 0));
+	if (speed == 0)
+		speed = ide_find_best_pio_mode(drive);
 
 	amd_set_drive(drive, speed);
 
@@ -325,8 +311,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
  */
 
 	if (amd_config->flags & AMD_CHECK_SWDMA) {
-		pci_read_config_byte(dev, PCI_REVISION_ID, &t);
-		if (t <= 7)
+		if (dev->revision <= 7)
 			amd_config->flags |= AMD_BAD_SWDMA;
 	}
 
@@ -334,10 +319,10 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
  * Check 80-wire cable presence.
  */
 
-	switch (amd_config->flags & AMD_UDMA) {
+	switch (amd_config->udma_mask) {
 
-		case AMD_UDMA_133:
-		case AMD_UDMA_100:
+		case ATA_UDMA6:
+		case ATA_UDMA5:
 			pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
 			pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
 			amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
@@ -349,7 +334,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
 				}
 			break;
 
-		case AMD_UDMA_66:
+		case ATA_UDMA4:
 			/* no host side cable detection */
 			amd_80w = 0x03;
 			break;
@@ -370,7 +355,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
 	if ((amd_config->flags & AMD_CHECK_SERENADE) &&
 		dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
 		dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
-			amd_config->flags = AMD_UDMA_100;
+			amd_config->udma_mask = ATA_UDMA5;
 
 /*
  * Determine the system bus clock.
@@ -395,8 +380,9 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, const ch
  */
 
 	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
-	printk(KERN_INFO "%s: %s (rev %02x) %s controller\n",
-		amd_chipset->name, pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA]);
+	printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
+		amd_chipset->name, pci_name(dev), dev->revision,
+		amd_dma[fls(amd_config->udma_mask) - 1]);
 
 /*
  * Register /proc/ide/amd74xx entry
@@ -437,12 +423,19 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
 		return;
 
         hwif->atapi_dma = 1;
-        hwif->ultra_mask = 0x7f;
-        hwif->mwdma_mask = 0x07;
-        hwif->swdma_mask = 0x07;
 
-	if (!hwif->udma_four)
-		hwif->udma_four = (amd_80w >> hwif->channel) & 1;
+	hwif->ultra_mask = amd_config->udma_mask;
+	hwif->mwdma_mask = 0x07;
+	if ((amd_config->flags & AMD_BAD_SWDMA) == 0)
+		hwif->swdma_mask = 0x07;
+
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
+		if ((amd_80w >> hwif->channel) & 1)
+			hwif->cbl = ATA_CBL_PATA80;
+		else
+			hwif->cbl = ATA_CBL_PATA40;
+	}
+
         hwif->ide_dma_check = &amd74xx_ide_dma_check;
         if (!noautodma)
                 hwif->autodma = 1;
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 8ab33faf6f76..2761510309b3 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -264,10 +264,11 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
 	hwif->swdma_mask = 0x04;
 
 	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
+
 	if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
-		hwif->udma_four = 1;
+		hwif->cbl = ATA_CBL_PATA80;
 	else
-		hwif->udma_four = 0;
+		hwif->cbl = ATA_CBL_PATA40;
 
 	hwif->dma_host_on = &atiixp_dma_host_on;
 	hwif->dma_host_off = &atiixp_dma_host_off;
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 7c57dc696f52..1e89dd6e5bbf 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/cmd64x.c		Version 1.47	Mar 19, 2007
+ * linux/drivers/ide/pci/cmd64x.c		Version 1.50	May 10, 2007
  *
  * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
  *           Due to massive hardware bugs, UltraDMA is only supported
@@ -52,9 +52,6 @@
 #define   ARTTIM23_DIS_RA2	0x04
 #define   ARTTIM23_DIS_RA3	0x08
 #define   ARTTIM23_INTR_CH1	0x10
-#define ARTTIM2		0x57
-#define ARTTIM3		0x57
-#define DRWTIM23	0x58
 #define DRWTIM2		0x58
 #define BRST		0x59
 #define DRWTIM3		0x5b
@@ -91,7 +88,6 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index)
 	u8 reg72 = 0, reg73 = 0;			/* primary */
 	u8 reg7a = 0, reg7b = 0;			/* secondary */
 	u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0;	/* extra */
-	u8 rev = 0;
 
 	p += sprintf(p, "\nController: %d\n", index);
 	p += sprintf(p, "PCI-%x Chipset.\n", dev->device);
@@ -106,9 +102,8 @@ static char * print_cmd64x_get_info (char *buf, struct pci_dev *dev, int index)
 	(void) pci_read_config_byte(dev, UDIDETCR1, &reg7b);
 
 	/* PCI0643/6 originally didn't have the primary channel enable bit */
-	(void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
 	if ((dev->device == PCI_DEVICE_ID_CMD_643) ||
-	    (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3))
+	    (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3))
 		reg51 |= CNTRL_ENA_1ST;
 
 	p += sprintf(p, "---------------- Primary Channel "
@@ -469,71 +464,43 @@ static int cmd646_1_ide_dma_end (ide_drive_t *drive)
 
 static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
 {
-	u32 class_rev = 0;
 	u8 mrdmode = 0;
 
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
-	class_rev &= 0xff;
+	if (dev->device == PCI_DEVICE_ID_CMD_646) {
+		u8 rev = 0;
 
-	switch(dev->device) {
-		case PCI_DEVICE_ID_CMD_643:
-			break;
-		case PCI_DEVICE_ID_CMD_646:
-			printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev);
-			switch(class_rev) {
-				case 0x07:
-				case 0x05:
-					printk("UltraDMA Capable");
-					break;
-				case 0x03:
-					printk("MultiWord DMA Force Limited");
-					break;
-				case 0x01:
-				default:
-					printk("MultiWord DMA Limited, IRQ workaround enabled");
-					break;
-				}
-			printk("\n");
-                        break;
-		case PCI_DEVICE_ID_CMD_648:
-		case PCI_DEVICE_ID_CMD_649:
+		pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+		switch (rev) {
+		case 0x07:
+		case 0x05:
+			printk("%s: UltraDMA capable", name);
 			break;
+		case 0x03:
 		default:
+			printk("%s: MultiWord DMA force limited", name);
+			break;
+		case 0x01:
+			printk("%s: MultiWord DMA limited, "
+			       "IRQ workaround enabled\n", name);
 			break;
+		}
 	}
 
 	/* Set a good latency timer and cache line size value. */
 	(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
 	/* FIXME: pci_set_master() to ensure a good latency timer value */
 
-	/* Setup interrupts. */
-	(void) pci_read_config_byte(dev, MRDMODE, &mrdmode);
-	mrdmode &= ~(0x30);
-	(void) pci_write_config_byte(dev, MRDMODE, mrdmode);
-
-	/* Use MEMORY READ LINE for reads.
-	 * NOTE: Although not mentioned in the PCI0646U specs,
-	 *       these bits are write only and won't be read
-	 *       back as set or not.  The PCI0646U2 specs clarify
-	 *       this point.
+	/*
+	 * Enable interrupts, select MEMORY READ LINE for reads.
+	 *
+	 * NOTE: although not mentioned in the PCI0646U specs,
+	 * bits 0-1 are write only and won't be read back as
+	 * set or not -- PCI0646U2 specs clarify this point.
 	 */
-	(void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02);
-
-	/* Set reasonable active/recovery/address-setup values. */
-	(void) pci_write_config_byte(dev, ARTTIM0,  0x40);
-	(void) pci_write_config_byte(dev, DRWTIM0,  0x3f);
-	(void) pci_write_config_byte(dev, ARTTIM1,  0x40);
-	(void) pci_write_config_byte(dev, DRWTIM1,  0x3f);
-#ifdef __i386__
-	(void) pci_write_config_byte(dev, ARTTIM23, 0x1c);
-#else
-	(void) pci_write_config_byte(dev, ARTTIM23, 0x5c);
-#endif
-	(void) pci_write_config_byte(dev, DRWTIM23, 0x3f);
-	(void) pci_write_config_byte(dev, DRWTIM3,  0x3f);
-#ifdef CONFIG_PPC
-	(void) pci_write_config_byte(dev, UDIDETCR0, 0xf0);
-#endif /* CONFIG_PPC */
+	(void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
+	mrdmode &= ~0x30;
+	(void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
 
 #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS)
 
@@ -548,29 +515,27 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
 	return 0;
 }
 
-static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif)
+static u8 __devinit ata66_cmd64x(ide_hwif_t *hwif)
 {
-	u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01;
+	struct pci_dev  *dev	= hwif->pci_dev;
+	u8 bmidecsr = 0, mask	= hwif->channel ? 0x02 : 0x01;
 
-	switch(hwif->pci_dev->device) {
-		case PCI_DEVICE_ID_CMD_643:
-		case PCI_DEVICE_ID_CMD_646:
-			return ata66;
-		default:
-			break;
+	switch (dev->device) {
+	case PCI_DEVICE_ID_CMD_648:
+	case PCI_DEVICE_ID_CMD_649:
+ 		pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
+		return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+	default:
+		return ATA_CBL_PATA40;
 	}
-	pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66);
-	return (ata66 & mask) ? 1 : 0;
 }
 
 static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= hwif->pci_dev;
-	unsigned int class_rev;
+	u8 rev			= 0;
 
-	hwif->autodma = 0;
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
-	class_rev &= 0xff;
+	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
 
 	hwif->tuneproc  = &cmd64x_tune_drive;
 	hwif->speedproc = &cmd64x_tune_chipset;
@@ -580,8 +545,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 	if (!hwif->dma_base)
 		return;
 
-	hwif->atapi_dma = 1;
-
+	hwif->atapi_dma  = 1;
+	hwif->mwdma_mask = 0x07;
 	hwif->ultra_mask = hwif->cds->udma_mask;
 
 	/*
@@ -596,16 +561,15 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 	 *
 	 * So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
 	 */
-	if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5)
+	if (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 5)
 		hwif->ultra_mask = 0x00;
 
-	hwif->mwdma_mask = 0x07;
-
 	hwif->ide_dma_check = &cmd64x_config_drive_for_dma;
-	if (!(hwif->udma_four))
-		hwif->udma_four = ata66_cmd64x(hwif);
 
-	switch(dev->device) {
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = ata66_cmd64x(hwif);
+
+	switch (dev->device) {
 	case PCI_DEVICE_ID_CMD_648:
 	case PCI_DEVICE_ID_CMD_649:
 	alt_irq_bits:
@@ -614,10 +578,10 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 		break;
 	case PCI_DEVICE_ID_CMD_646:
 		hwif->chipset = ide_cmd646;
-		if (class_rev == 0x01) {
+		if (rev == 0x01) {
 			hwif->ide_dma_end = &cmd646_1_ide_dma_end;
 			break;
-		} else if (class_rev >= 0x03)
+		} else if (rev >= 0x03)
 			goto alt_irq_bits;
 		/* fall thru */
 	default:
@@ -626,11 +590,9 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 		break;
 	}
 
-
 	if (!noautodma)
 		hwif->autodma = 1;
-	hwif->drives[0].autodma = hwif->autodma;
-	hwif->drives[1].autodma = hwif->autodma;
+	hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
 }
 
 static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d)
@@ -640,14 +602,11 @@ static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d)
 
 static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d)
 {
-	u8 rev = 0;
-
 	/*
 	 * The original PCI0646 didn't have the primary channel enable bit,
 	 * it appeared starting with PCI0646U (i.e. revision ID 3).
 	 */
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-	if (rev < 3)
+	if (dev->revision < 3)
 		d->enablebits[0].reg = 0;
 
 	return ide_setup_pci_device(dev, d);
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 1eec1f308d16..b5c00d15a704 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -236,7 +236,7 @@ static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const ch
 	 */
 
 	pci_set_master(cs5530_0);
-	pci_set_mwi(cs5530_0);
+	pci_try_set_mwi(cs5530_0);
 
 	/*
 	 * Set PCI CacheLineSize to 16-bytes:
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 41925c47ef05..10f61f38243c 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -187,7 +187,8 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
 
 	/* if a 80 wire cable was detected */
 	pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
-	return (bit & 1);
+
+	return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }
 
 /****
@@ -212,8 +213,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
 	hwif->ultra_mask = 0x1F;
 	hwif->mwdma_mask = 0x07;
 
-
-	hwif->udma_four = cs5535_cable_detect(hwif->pci_dev);
+	hwif->cbl = cs5535_cable_detect(hwif->pci_dev);
 
 	if (!noautodma)
 		hwif->autodma = 1;
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index c33d0b0f11c9..e9b07a97c340 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/hpt366.c		Version 1.06	Jun 27, 2007
+ * linux/drivers/ide/pci/hpt366.c		Version 1.10	Jun 29, 2007
  *
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
@@ -77,7 +77,7 @@
  *   since they may tamper with its fields
  * - prefix the driver startup messages with the real chip name
  * - claim the extra 240 bytes of I/O space for all chips
- * - optimize the rate masking/filtering and the drive list lookup code
+ * - optimize the UltraDMA filtering and the drive list lookup code
  * - use pci_get_slot() to get to the function 1 of HPT36x/374
  * - cache offset of the channel's misc. control registers (MCRs) being used
  *   throughout the driver
@@ -99,9 +99,9 @@
  *   stop duplicating it for each channel by storing the pointer in the pci_dev
  *   structure: first, at the init_setup stage, point it to a static "template"
  *   with only the chip type and its specific base DPLL frequency, the highest
- *   supported DMA mode, and the chip settings table pointer filled, then, at
- *   the init_chipset stage, allocate per-chip instance  and fill it with the
- *   rest of the necessary information
+ *   UltraDMA mode, and the chip settings table pointer filled,  then, at the
+ *   init_chipset stage, allocate per-chip instance  and fill it with the rest
+ *   of the necessary information
  * - get rid of the constant thresholds in the HPT37x PCI clock detection code,
  *   switch  to calculating  PCI clock frequency based on the chip's base DPLL
  *   frequency
@@ -112,6 +112,7 @@
  *   also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips;
  *   unify HPT36x/37x timing setup code and the speedproc handlers by joining
  *   the register setting lists into the table indexed by the clock selected
+ * - set the correct hwif->ultra_mask for each individual chip
  *	Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
  */
 
@@ -391,7 +392,7 @@ enum ata_clock {
 
 struct hpt_info {
 	u8 chip_type;		/* Chip type */
-	u8 max_mode;		/* Speeds allowed */
+	u8 max_ultra;		/* Max. UltraDMA mode allowed */
 	u8 dpll_clk;		/* DPLL clock in MHz */
 	u8 pci_clk;		/* PCI  clock in MHz */
 	u32 **settings; 	/* Chipset settings table */
@@ -430,77 +431,77 @@ static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
 
 static struct hpt_info hpt36x __devinitdata = {
 	.chip_type	= HPT36x,
-	.max_mode	= (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1,
+	.max_ultra	= HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? 4 : 3) : 2,
 	.dpll_clk	= 0,	/* no DPLL */
 	.settings	= hpt36x_settings
 };
 
 static struct hpt_info hpt370 __devinitdata = {
 	.chip_type	= HPT370,
-	.max_mode	= HPT370_ALLOW_ATA100_5 ? 3 : 2,
+	.max_ultra	= HPT370_ALLOW_ATA100_5 ? 5 : 4,
 	.dpll_clk	= 48,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt370a __devinitdata = {
 	.chip_type	= HPT370A,
-	.max_mode	= HPT370_ALLOW_ATA100_5 ? 3 : 2,
+	.max_ultra	= HPT370_ALLOW_ATA100_5 ? 5 : 4,
 	.dpll_clk	= 48,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt374 __devinitdata = {
 	.chip_type	= HPT374,
-	.max_mode	= 3,
+	.max_ultra	= 5,
 	.dpll_clk	= 48,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt372 __devinitdata = {
 	.chip_type	= HPT372,
-	.max_mode	= HPT372_ALLOW_ATA133_6 ? 4 : 3,
+	.max_ultra	= HPT372_ALLOW_ATA133_6 ? 6 : 5,
 	.dpll_clk	= 55,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt372a __devinitdata = {
 	.chip_type	= HPT372A,
-	.max_mode	= HPT372_ALLOW_ATA133_6 ? 4 : 3,
+	.max_ultra	= HPT372_ALLOW_ATA133_6 ? 6 : 5,
 	.dpll_clk	= 66,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt302 __devinitdata = {
 	.chip_type	= HPT302,
-	.max_mode	= HPT302_ALLOW_ATA133_6 ? 4 : 3,
+	.max_ultra	= HPT372_ALLOW_ATA133_6 ? 6 : 5,
 	.dpll_clk	= 66,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt371 __devinitdata = {
 	.chip_type	= HPT371,
-	.max_mode	= HPT371_ALLOW_ATA133_6 ? 4 : 3,
+	.max_ultra	= HPT371_ALLOW_ATA133_6 ? 6 : 5,
 	.dpll_clk	= 66,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt372n __devinitdata = {
 	.chip_type	= HPT372N,
-	.max_mode	= HPT372_ALLOW_ATA133_6 ? 4 : 3,
+	.max_ultra	= HPT372_ALLOW_ATA133_6 ? 6 : 5,
 	.dpll_clk	= 77,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt302n __devinitdata = {
 	.chip_type	= HPT302N,
-	.max_mode	= HPT302_ALLOW_ATA133_6 ? 4 : 3,
+	.max_ultra	= HPT302_ALLOW_ATA133_6 ? 6 : 5,
 	.dpll_clk	= 77,
 	.settings	= hpt37x_settings
 };
 
 static struct hpt_info hpt371n __devinitdata = {
 	.chip_type	= HPT371N,
-	.max_mode	= HPT371_ALLOW_ATA133_6 ? 4 : 3,
+	.max_ultra	= HPT371_ALLOW_ATA133_6 ? 6 : 5,
 	.dpll_clk	= 77,
 	.settings	= hpt37x_settings
 };
@@ -523,53 +524,38 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list)
 static u8 hpt3xx_udma_filter(ide_drive_t *drive)
 {
 	struct hpt_info *info	= pci_get_drvdata(HWIF(drive)->pci_dev);
-	u8 chip_type		= info->chip_type;
-	u8 mode			= info->max_mode;
 	u8 mask;
 
-	switch (mode) {
-		case 0x04:
-			mask = 0x7f;
-			break;
-		case 0x03:
+	switch (info->chip_type) {
+	case HPT370A:
+		if (!HPT370_ALLOW_ATA100_5 ||
+		    check_in_drive_list(drive, bad_ata100_5))
+			return 0x1f;
+		else
+			return 0x3f;
+	case HPT370:
+		if (!HPT370_ALLOW_ATA100_5 ||
+		    check_in_drive_list(drive, bad_ata100_5))
+			mask = 0x1f;
+		else
 			mask = 0x3f;
-			if (chip_type >= HPT374)
-				break;
-			if (!check_in_drive_list(drive, bad_ata100_5))
-				goto check_bad_ata33;
-			/* fall thru */
-		case 0x02:
+		break;
+	case HPT36x:
+		if (!HPT366_ALLOW_ATA66_4 ||
+		    check_in_drive_list(drive, bad_ata66_4))
+			mask = 0x0f;
+		else
 			mask = 0x1f;
 
-			/*
-			 * CHECK ME, Does this need to be changed to HPT374 ??
-			 */
-			if (chip_type >= HPT370)
-				goto check_bad_ata33;
-			if (HPT366_ALLOW_ATA66_4 &&
-			    !check_in_drive_list(drive, bad_ata66_4))
-				goto check_bad_ata33;
-
-			mask = 0x0f;
-			if (HPT366_ALLOW_ATA66_3 &&
-			    !check_in_drive_list(drive, bad_ata66_3))
-				goto check_bad_ata33;
-			/* fall thru */
-		case 0x01:
+		if (!HPT366_ALLOW_ATA66_3 ||
+		    check_in_drive_list(drive, bad_ata66_3))
 			mask = 0x07;
-
-		check_bad_ata33:
-			if (chip_type >= HPT370A)
-				break;
-			if (!check_in_drive_list(drive, bad_ata33))
-				break;
-			/* fall thru */
-		case 0x00:
-		default:
-			mask = 0x00;
-			break;
+		break;
+	default:
+		return 0x7f;
 	}
-	return mask;
+
+	return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
 }
 
 static u32 get_speed_setting(u8 speed, struct hpt_info *info)
@@ -737,7 +723,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive)
  * This is specific to the HPT366 UDMA chipset
  * by HighPoint|Triones Technologies, Inc.
  */
-static int hpt366_ide_dma_lostirq(ide_drive_t *drive)
+static void hpt366_dma_lost_irq(ide_drive_t *drive)
 {
 	struct pci_dev *dev = HWIF(drive)->pci_dev;
 	u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
@@ -749,7 +735,7 @@ static int hpt366_ide_dma_lostirq(ide_drive_t *drive)
 		drive->name, __FUNCTION__, mcr1, mcr3, scr1);
 	if (scr1 & 0x10)
 		pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
-	return __ide_dma_lostirq(drive);
+	ide_dma_lost_irq(drive);
 }
 
 static void hpt370_clear_engine(ide_drive_t *drive)
@@ -799,10 +785,10 @@ static int hpt370_ide_dma_end(ide_drive_t *drive)
 	return __ide_dma_end(drive);
 }
 
-static int hpt370_ide_dma_timeout(ide_drive_t *drive)
+static void hpt370_dma_timeout(ide_drive_t *drive)
 {
 	hpt370_irq_timeout(drive);
-	return __ide_dma_timeout(drive);
+	ide_dma_timeout(drive);
 }
 
 /* returns 1 if DMA IRQ issued, 0 otherwise */
@@ -1150,7 +1136,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 		  * Select 66 MHz DPLL clock only if UltraATA/133 mode is
 		  * supported/enabled, use 50 MHz DPLL clock otherwise...
 		  */
-		if (info->max_mode == 0x04) {
+		if (info->max_ultra == 6) {
 			dpll_clk = 66;
 			clock = ATA_CLOCK_66MHZ;
 		} else if (dpll_clk) {	/* HPT36x chips don't have DPLL */
@@ -1243,7 +1229,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	struct pci_dev	*dev		= hwif->pci_dev;
 	struct hpt_info *info		= pci_get_drvdata(dev);
 	int serialize			= HPT_SERIALIZE_IO;
-	u8  scr1 = 0, ata66		= (hwif->channel) ? 0x01 : 0x02;
+	u8  scr1 = 0, ata66		= hwif->channel ? 0x01 : 0x02;
 	u8  chip_type			= info->chip_type;
 	u8  new_mcr, old_mcr 		= 0;
 
@@ -1256,7 +1242,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	hwif->intrproc			= &hpt3xx_intrproc;
 	hwif->maskproc			= &hpt3xx_maskproc;
 	hwif->busproc			= &hpt3xx_busproc;
-	hwif->udma_filter		= &hpt3xx_udma_filter;
+
+	if (chip_type <= HPT370A)
+		hwif->udma_filter	= &hpt3xx_udma_filter;
 
 	/*
 	 * HPT3xxN chips have some complications:
@@ -1305,7 +1293,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 		return;
 	}
 
-	hwif->ultra_mask = 0x7f;
+	hwif->ultra_mask = hwif->cds->udma_mask;
 	hwif->mwdma_mask = 0x07;
 
 	/*
@@ -1342,8 +1330,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	} else
 		pci_read_config_byte (dev, 0x5a, &scr1);
 
-	if (!hwif->udma_four)
-		hwif->udma_four = (scr1 & ata66) ? 0 : 1;
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 
 	hwif->ide_dma_check		= &hpt366_config_drive_xfer_rate;
 
@@ -1353,9 +1341,9 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	} else if (chip_type >= HPT370) {
 		hwif->dma_start 	= &hpt370_ide_dma_start;
 		hwif->ide_dma_end	= &hpt370_ide_dma_end;
-		hwif->ide_dma_timeout	= &hpt370_ide_dma_timeout;
+		hwif->dma_timeout	= &hpt370_dma_timeout;
 	} else
-		hwif->ide_dma_lostirq	= &hpt366_ide_dma_lostirq;
+		hwif->dma_lost_irq	= &hpt366_dma_lost_irq;
 
 	if (!noautodma)
 		hwif->autodma = 1;
@@ -1425,11 +1413,9 @@ static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d
 static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
 {
 	struct hpt_info *info;
-	u8 rev = 0, mcr1 = 0;
+	u8 mcr1 = 0;
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
-	if (rev > 1) {
+	if (dev->revision > 1) {
 		d->name = "HPT371N";
 
 		info = &hpt371n;
@@ -1454,11 +1440,8 @@ static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
 static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d)
 {
 	struct hpt_info *info;
-	u8 rev = 0;
-
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
 
-	if (rev > 1) {
+	if (dev->revision > 1) {
 		d->name = "HPT372N";
 
 		info = &hpt372n;
@@ -1472,11 +1455,8 @@ static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d
 static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
 {
 	struct hpt_info *info;
-	u8 rev = 0;
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
-	if (rev > 1) {
+	if (dev->revision > 1) {
 		d->name = "HPT302N";
 
 		info = &hpt302n;
@@ -1490,7 +1470,7 @@ static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
 static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
 {
 	struct pci_dev *dev2;
-	u8 rev = 0;
+	u8 rev = dev->revision;
 	static char   *chipset_names[] = { "HPT366", "HPT366",  "HPT368",
 					   "HPT370", "HPT370A", "HPT372",
 					   "HPT372N" };
@@ -1501,11 +1481,35 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
 	if (PCI_FUNC(dev->devfn) & 1)
 		return -ENODEV;
 
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+	switch (rev) {
+	case 0:
+	case 1:
+	case 2:
+		/*
+		 * HPT36x chips have one channel per function and have
+		 * both channel enable bits located differently and visible
+		 * to both functions -- really stupid design decision... :-(
+		 * Bit 4 is for the primary channel, bit 5 for the secondary.
+		 */
+		d->channels = 1;
+		d->enablebits[0].mask = d->enablebits[0].val = 0x10;
 
-	if (rev > 6)
+		d->udma_mask = HPT366_ALLOW_ATA66_3 ?
+			      (HPT366_ALLOW_ATA66_4 ? 0x1f : 0x0f) : 0x07;
+		break;
+	case 3:
+	case 4:
+		d->udma_mask = HPT370_ALLOW_ATA100_5 ? 0x3f : 0x1f;
+		break;
+	default:
 		rev = 6;
-		
+		/* fall thru */
+	case 5:
+	case 6:
+		d->udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f;
+		break;
+	}
+
 	d->name = chipset_names[rev];
 
 	pci_set_drvdata(dev, info[rev]);
@@ -1513,15 +1517,6 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
 	if (rev > 2)
 		goto init_single;
 
-	/*
-	 * HPT36x chips have one channel per function and have
-	 * both channel enable bits located differently and visible
-	 * to both functions -- really stupid design decision... :-(
-	 * Bit 4 is for the primary channel, bit 5 for the secondary.
-	 */
-	d->channels = 1;
-	d->enablebits[0].mask = d->enablebits[0].val = 0x10;
-
 	if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
 		u8  mcr1 = 0, pin1 = 0, pin2 = 0;
 		int ret;
@@ -1573,6 +1568,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+		.udma_mask	= HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
 		.extra		= 240
 	},{	/* 2 */
@@ -1584,6 +1580,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+		.udma_mask	= HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
 		.extra		= 240
 	},{	/* 3 */
@@ -1595,6 +1592,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+		.udma_mask	= HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
 		.extra		= 240
 	},{	/* 4 */
@@ -1606,6 +1604,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
 		.channels	= 2,	/* 4 */
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+		.udma_mask	= 0x3f,
 		.bootable	= OFF_BOARD,
 		.extra		= 240
 	},{	/* 5 */
@@ -1617,6 +1616,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = {
 		.channels	= 2,	/* 4 */
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
+		.udma_mask	= HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,
 		.bootable	= OFF_BOARD,
 		.extra		= 240
 	}
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index c04a02687b95..ff48c23e571e 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -231,7 +231,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive)
 
 static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
 {
-	u8 reg42h = 0, ata66 = 0;
+	u8 reg42h = 0;
 
 	hwif->speedproc = &it8213_tune_chipset;
 	hwif->tuneproc	= &it8213_tuneproc;
@@ -250,11 +250,11 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
 	hwif->swdma_mask = 0x04;
 
 	pci_read_config_byte(hwif->pci_dev, 0x42, &reg42h);
-	ata66 = (reg42h & 0x02) ? 0 : 1;
 
 	hwif->ide_dma_check = &it8213_config_drive_for_dma;
-	if (!(hwif->udma_four))
-		hwif->udma_four = ata66;
+
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 
 	/*
 	 *	The BIOS often doesn't set up DMA on this controller
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 3aeb7f1b7916..8197b653ba1e 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -491,10 +491,10 @@ static int it821x_config_drive_for_dma (ide_drive_t *drive)
  *	the needed logic onboard.
  */
 
-static unsigned int __devinit ata66_it821x(ide_hwif_t *hwif)
+static u8 __devinit ata66_it821x(ide_hwif_t *hwif)
 {
 	/* The reference driver also only does disk side */
-	return 1;
+	return ATA_CBL_PATA80;
 }
 
 /**
@@ -662,8 +662,9 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 	hwif->mwdma_mask = 0x07;
 
 	hwif->ide_dma_check = &it821x_config_drive_for_dma;
-	if (!(hwif->udma_four))
-		hwif->udma_four = ata66_it821x(hwif);
+
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = ata66_it821x(hwif);
 
 	/*
 	 *	The BIOS often doesn't set up DMA on this controller
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 76ed25147229..a6008f63e71e 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -25,10 +25,10 @@ typedef enum {
  *	ata66_jmicron		-	Cable check
  *	@hwif: IDE port
  *
- *	Return 1 if the cable is 80pin
+ *	Returns the cable type.
  */
 
-static int __devinit ata66_jmicron(ide_hwif_t *hwif)
+static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
 {
 	struct pci_dev *pdev = hwif->pci_dev;
 
@@ -70,16 +70,17 @@ static int __devinit ata66_jmicron(ide_hwif_t *hwif)
 	{
 	case PORT_PATA0:
 		if (control & (1 << 3))	/* 40/80 pin primary */
-			return 0;
-		return 1;
+			return ATA_CBL_PATA40;
+		return ATA_CBL_PATA80;
 	case PORT_PATA1:
 		if (control5 & (1 << 19))	/* 40/80 pin secondary */
-			return 0;
-		return 1;
+			return ATA_CBL_PATA40;
+		return ATA_CBL_PATA80;
 	case PORT_SATA:
 		break;
 	}
-	return 1; /* Avoid bogus "control reaches end of non-void function" */
+	/* Avoid bogus "control reaches end of non-void function" */
+	return ATA_CBL_PATA80;
 }
 
 static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted)
@@ -159,8 +160,9 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
 	hwif->mwdma_mask = 0x07;
 
 	hwif->ide_dma_check = &jmicron_config_drive_for_dma;
-	if (!(hwif->udma_four))
-		hwif->udma_four = ata66_jmicron(hwif);
+
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = ata66_jmicron(hwif);
 
 	hwif->autodma = 1;
 	hwif->drives[0].autodma = hwif->autodma;
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 0765dce6948e..ee5020df005d 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -225,7 +225,10 @@ static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
 
 static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
 {
-	return get_indexed_reg(hwif, 0x0b) & 0x04;
+	if (get_indexed_reg(hwif, 0x0b) & 0x04)
+		return ATA_CBL_PATA40;
+	else
+		return ATA_CBL_PATA80;
 }
 
 static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
@@ -509,8 +512,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
 
 	hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate;
 
-	if (!hwif->udma_four)
-		hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1;
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = pdcnew_cable_detect(hwif);
 
 	if (!noautodma)
 		hwif->autodma = 1;
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 23844687deea..41ac4a94959f 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -152,8 +152,10 @@ static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
 static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
 {
 	u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10);
+
 	pci_read_config_word(hwif->pci_dev, 0x50, &CIS);
-	return (CIS & mask) ? 1 : 0;
+
+	return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 }
 
 /*
@@ -267,18 +269,24 @@ somebody_else:
 	return (dma_stat & 4) == 4;	/* return 1 if INTR asserted */
 }
 
-static int pdc202xx_ide_dma_lostirq(ide_drive_t *drive)
+static void pdc202xx_dma_lost_irq(ide_drive_t *drive)
 {
-	if (HWIF(drive)->resetproc != NULL)
-		HWIF(drive)->resetproc(drive);
-	return __ide_dma_lostirq(drive);
+	ide_hwif_t *hwif = HWIF(drive);
+
+	if (hwif->resetproc != NULL)
+		hwif->resetproc(drive);
+
+	ide_dma_lost_irq(drive);
 }
 
-static int pdc202xx_ide_dma_timeout(ide_drive_t *drive)
+static void pdc202xx_dma_timeout(ide_drive_t *drive)
 {
-	if (HWIF(drive)->resetproc != NULL)
-		HWIF(drive)->resetproc(drive);
-	return __ide_dma_timeout(drive);
+	ide_hwif_t *hwif = HWIF(drive);
+
+	if (hwif->resetproc != NULL)
+		hwif->resetproc(drive);
+
+	ide_dma_timeout(drive);
 }
 
 static void pdc202xx_reset_host (ide_hwif_t *hwif)
@@ -347,12 +355,13 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
 	hwif->err_stops_fifo = 1;
 
 	hwif->ide_dma_check = &pdc202xx_config_drive_xfer_rate;
-	hwif->ide_dma_lostirq = &pdc202xx_ide_dma_lostirq;
-	hwif->ide_dma_timeout = &pdc202xx_ide_dma_timeout;
+	hwif->dma_lost_irq = &pdc202xx_dma_lost_irq;
+	hwif->dma_timeout = &pdc202xx_dma_timeout;
 
 	if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) {
-		if (!(hwif->udma_four))
-			hwif->udma_four = (pdc202xx_old_cable_detect(hwif)) ? 0 : 1;
+		if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+			hwif->cbl = pdc202xx_old_cable_detect(hwif);
+
 		hwif->dma_start = &pdc202xx_old_ide_dma_start;
 		hwif->ide_dma_end = &pdc202xx_old_ide_dma_end;
 	} 
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 8b219dd63024..1372c35be035 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,5 +1,5 @@
 /*
- *  linux/drivers/ide/pci/piix.c	Version 0.47	February 8, 2007
+ *  linux/drivers/ide/pci/piix.c	Version 0.50	Jun 10, 2007
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -394,14 +394,45 @@ static void piix_dma_clear_irq(ide_drive_t *drive)
 	hwif->OUTB(dma_stat, hwif->dma_status);
 }
 
-static int __devinit piix_cable_detect(ide_hwif_t *hwif)
+struct ich_laptop {
+	u16 device;
+	u16 subvendor;
+	u16 subdevice;
+};
+
+/*
+ *	List of laptops that use short cables rather than 80 wire
+ */
+
+static const struct ich_laptop ich_laptop[] = {
+	/* devid, subvendor, subdev */
+	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
+	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
+	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
+	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on Acer Aspire 2023WLMi */
+	/* end marker */
+	{ 0, }
+};
+
+static u8 __devinit piix_cable_detect(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = hwif->pci_dev;
+	struct pci_dev *pdev = hwif->pci_dev;
+	const struct ich_laptop *lap = &ich_laptop[0];
 	u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
 
-	pci_read_config_byte(dev, 0x54, &reg54h);
+	/* check for specials */
+	while (lap->device) {
+		if (lap->device == pdev->device &&
+		    lap->subvendor == pdev->subsystem_vendor &&
+		    lap->subdevice == pdev->subsystem_device) {
+			return ATA_CBL_PATA40_SHORT;
+		}
+		lap++;
+	}
+
+	pci_read_config_byte(pdev, 0x54, &reg54h);
 
-	return (reg54h & mask) ? 1 : 0;
+	return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }
 
 /**
@@ -444,8 +475,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
 	hwif->swdma_mask = 0x04;
 
 	if (hwif->ultra_mask & 0x78) {
-		if (!hwif->udma_four)
-			hwif->udma_four = piix_cable_detect(hwif);
+		if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+			hwif->cbl = piix_cable_detect(hwif);
 	}
 
 	if (no_piix_dma)
@@ -541,18 +572,16 @@ static void __devinit piix_check_450nx(void)
 {
 	struct pci_dev *pdev = NULL;
 	u16 cfg;
-	u8 rev;
 	while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
 	{
 		/* Look for 450NX PXB. Check for problem configurations
 		   A PCI quirk checks bit 6 already */
-		pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 		pci_read_config_word(pdev, 0x41, &cfg);
 		/* Only on the original revision: IDE DMA can hang */
-		if(rev == 0x00)
+		if (pdev->revision == 0x00)
 			no_piix_dma = 1;
 		/* On all revisions below 5 PXB bus lock must be disabled for IDE */
-		else if(cfg & (1<<14) && rev < 5)
+		else if (cfg & (1<<14) && pdev->revision < 5)
 			no_piix_dma = 2;
 	}
 	if(no_piix_dma)
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 55bc0a32e34f..7b87488e3daa 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -716,7 +716,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 	hwif->atapi_dma = 1;
 
 	/* we support 80c cable only. */
-	hwif->udma_four = 1;
+	hwif->cbl = ATA_CBL_PATA80;
 
 	hwif->autodma = 0;
 	if (!noautodma)
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index d9c4fd1ae996..ed04e0c8dd4c 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/serverworks.c		Version 0.11	Jun 2 2007
+ * linux/drivers/ide/pci/serverworks.c		Version 0.20	Jun 3 2007
  *
  * Copyright (C) 1998-2000 Michel Aubry
  * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
@@ -55,7 +55,6 @@ static const char *svwks_bad_ata100[] = {
 	NULL
 };
 
-static u8 svwks_revision = 0;
 static struct pci_dev *isa_dev;
 
 static int check_in_drive_lists (ide_drive_t *drive, const char **list)
@@ -71,9 +70,6 @@ static u8 svwks_udma_filter(ide_drive_t *drive)
 	struct pci_dev *dev     = HWIF(drive)->pci_dev;
 	u8 mask = 0;
 
-	if (!svwks_revision)
-		pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
-
 	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
 		return 0x1f;
 	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
@@ -88,9 +84,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive)
 			return 0;
 		/* Check the OSB4 DMA33 enable bit */
 		return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
-	} else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) {
+	} else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
 		return 0x07;
-	} else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) {
+	} else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) {
 		u8 btr = 0, mode;
 		pci_read_config_byte(dev, 0x5A, &btr);
 		mode = btr & 0x3;
@@ -151,84 +147,11 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 	if(dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4 &&
 		drive->media == ide_disk && speed >= XFER_UDMA_0)
 			BUG();
-			
-	pci_read_config_byte(dev, drive_pci[drive->dn], &pio_timing);
-	pci_read_config_byte(dev, drive_pci2[drive->dn], &dma_timing);
+
 	pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing);
 	pci_read_config_word(dev, 0x4A, &csb5_pio);
 	pci_read_config_byte(dev, 0x54, &ultra_enable);
 
-	/* If we are in RAID mode (eg AMI MegaIDE) then we can't it
-	   turns out trust the firmware configuration */
-
-	if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
-		goto oem_setup_failed;
-
-	/* Per Specified Design by OEM, and ASIC Architect */
-	if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
-	    (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
-		if (!drive->init_speed) {
-			u8 dma_stat = inb(hwif->dma_status);
-
-			if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) &&
-			    ((dma_stat & (1<<(5+unit))) == (1<<(5+unit)))) {
-				drive->current_speed = drive->init_speed = XFER_UDMA_0 + udma_modes[(ultra_timing >> (4*unit)) & ~(0xF0)];
-				return 0;
-			} else if ((dma_timing) &&
-				   ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) {
-				u8 dmaspeed;
-
-				switch (dma_timing & 0x77) {
-				case 0x20:
-					dmaspeed = XFER_MW_DMA_2;
-					break;
-				case 0x21:
-					dmaspeed = XFER_MW_DMA_1;
-					break;
-				case 0x77:
-					dmaspeed = XFER_MW_DMA_0;
-					break;
-				default:
-					goto dma_pio;
-				}
-
-				drive->current_speed = drive->init_speed = dmaspeed;
-				return 0;
-			}
-dma_pio:
-			if (pio_timing) {
-				u8 piospeed;
-
-				switch (pio_timing & 0x7f) {
-				case 0x20:
-					piospeed = XFER_PIO_4;
-					break;
-				case 0x22:
-					piospeed = XFER_PIO_3;
-					break;
-				case 0x34:
-					piospeed = XFER_PIO_2;
-					break;
-				case 0x47:
-					piospeed = XFER_PIO_1;
-					break;
-				case 0x5d:
-					piospeed = XFER_PIO_0;
-					break;
-				default:
-					goto oem_setup_failed;
-				}
-
-				drive->current_speed = drive->init_speed = piospeed;
-				return 0;
-			}
-		}
-	}
-
-oem_setup_failed:
-
-	pio_timing	= 0;
-	dma_timing	= 0;
 	ultra_timing	&= ~(0x0F << (4*unit));
 	ultra_enable	&= ~(0x01 << drive->dn);
 	csb5_pio	&= ~(0x0F << (4*drive->dn));
@@ -307,9 +230,6 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 	unsigned int reg;
 	u8 btr;
 
-	/* save revision id to determine DMA capability */
-	pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
-
 	/* force Master Latency Timer value to 64 PCICLKs */
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
 
@@ -388,7 +308,7 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 		if (!(PCI_FUNC(dev->devfn) & 1))
 			btr |= 0x2;
 		else
-			btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+			btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
 		pci_write_config_byte(dev, 0x5A, btr);
 	}
 	/* Setup HT1000 SouthBridge Controller - Single Channel Only */
@@ -402,9 +322,9 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 	return dev->irq;
 }
 
-static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks_svwks(ide_hwif_t *hwif)
 {
-	return 1;
+	return ATA_CBL_PATA80;
 }
 
 /* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits
@@ -414,7 +334,7 @@ static unsigned int __devinit ata66_svwks_svwks (ide_hwif_t *hwif)
  * Bit 14 clear = primary IDE channel does not have 80-pin cable.
  * Bit 14 set   = primary IDE channel has 80-pin cable.
  */
-static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks_dell(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = hwif->pci_dev;
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
@@ -422,8 +342,8 @@ static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif)
 	    (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
 	     dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE))
 		return ((1 << (hwif->channel + 14)) &
-			dev->subsystem_device) ? 1 : 0;
-	return 0;
+			dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+	return ATA_CBL_PATA40;
 }
 
 /* Sun Cobalt Alpine hardware avoids the 80-pin cable
@@ -432,18 +352,18 @@ static unsigned int __devinit ata66_svwks_dell (ide_hwif_t *hwif)
  *
  * WARNING: this only works on Alpine hardware!
  */
-static unsigned int __devinit ata66_svwks_cobalt (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks_cobalt(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = hwif->pci_dev;
 	if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
 	    dev->vendor	== PCI_VENDOR_ID_SERVERWORKS &&
 	    dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
 		return ((1 << (hwif->channel + 14)) &
-			dev->subsystem_device) ? 1 : 0;
-	return 0;
+			dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
+	return ATA_CBL_PATA40;
 }
 
-static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif)
+static u8 __devinit ata66_svwks(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = hwif->pci_dev;
 
@@ -462,9 +382,9 @@ static unsigned int __devinit ata66_svwks (ide_hwif_t *hwif)
 	/* Per Specified Design by OEM, and ASIC Architect */
 	if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
 	    (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2))
-		return 1;
+		return ATA_CBL_PATA80;
 
-	return 0;
+	return ATA_CBL_PATA40;
 }
 
 static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
@@ -495,8 +415,8 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
 
 	hwif->ide_dma_check = &svwks_config_drive_xfer_rate;
 	if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
-		if (!hwif->udma_four)
-			hwif->udma_four = ata66_svwks(hwif);
+		if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+			hwif->cbl = ata66_svwks(hwif);
 	}
 	if (!noautodma)
 		hwif->autodma = 1;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index d3185e29a38e..d396b2929ed8 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -316,14 +316,6 @@ static void sgiioc4_dma_host_off(ide_drive_t * drive)
 	sgiioc4_clearirq(drive);
 }
 
-static int
-sgiioc4_ide_dma_lostirq(ide_drive_t * drive)
-{
-	HWIF(drive)->resetproc(drive);
-
-	return __ide_dma_lostirq(drive);
-}
-
 static void
 sgiioc4_resetproc(ide_drive_t * drive)
 {
@@ -331,6 +323,14 @@ sgiioc4_resetproc(ide_drive_t * drive)
 	sgiioc4_clearirq(drive);
 }
 
+static void
+sgiioc4_dma_lost_irq(ide_drive_t * drive)
+{
+	sgiioc4_resetproc(drive);
+
+	ide_dma_lost_irq(drive);
+}
+
 static u8
 sgiioc4_INB(unsigned long port)
 {
@@ -607,8 +607,8 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
 	hwif->dma_host_on = &sgiioc4_dma_host_on;
 	hwif->dma_host_off = &sgiioc4_dma_host_off;
-	hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
-	hwif->ide_dma_timeout = &__ide_dma_timeout;
+	hwif->dma_lost_irq = &sgiioc4_dma_lost_irq;
+	hwif->dma_timeout = &ide_dma_timeout;
 
 	hwif->INB = &sgiioc4_INB;
 }
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 1a4444e7226a..1c3e35487893 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -933,16 +933,17 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
  *	interface.
  */
 
-static unsigned int __devinit ata66_siimage(ide_hwif_t *hwif)
+static u8 __devinit ata66_siimage(ide_hwif_t *hwif)
 {
 	unsigned long addr = siimage_selreg(hwif, 0);
-	if (pci_get_drvdata(hwif->pci_dev) == NULL) {
-		u8 ata66 = 0;
+	u8 ata66 = 0;
+
+	if (pci_get_drvdata(hwif->pci_dev) == NULL)
 		pci_read_config_byte(hwif->pci_dev, addr, &ata66);
-		return (ata66 & 0x01) ? 1 : 0;
-	}
+	else
+		ata66 = hwif->INB(addr);
 
-	return (hwif->INB(addr) & 0x01) ? 1 : 0;
+	return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }
 
 /**
@@ -988,8 +989,9 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
 		hwif->atapi_dma = 1;
 
 	hwif->ide_dma_check = &siimage_config_drive_for_dma;
-	if (!(hwif->udma_four))
-		hwif->udma_four = ata66_siimage(hwif);
+
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = ata66_siimage(hwif);
 
 	if (hwif->mmio) {
 		hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq;
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index ec0adad9ef61..756a9b6eb462 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/sis5513.c	Version 0.20	Mar 4, 2007
+ * linux/drivers/ide/pci/sis5513.c	Version 0.25	Jun 10, 2007
  *
  * Copyright (C) 1999-2000	Andre Hedrick <andre@linux-ide.org>
  * Copyright (C) 2002		Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
@@ -659,9 +659,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
 
 		/* Special case for SiS630 : 630S/ET is ATA_100a */
 		if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
-			u8 hostrev;
-			pci_read_config_byte(host, PCI_REVISION_ID, &hostrev);
-			if (hostrev >= 0x30)
+			if (host->revision >= 0x30)
 				chipset_family = ATA_100a;
 		}
 		pci_dev_put(host);
@@ -702,7 +700,6 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
 			u16 trueid;
 			u8 prefctl;
 			u8 idecfg;
-			u8 sbrev;
 
 			pci_read_config_byte(dev, 0x4a, &idecfg);
 			pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
@@ -712,11 +709,10 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
 			if (trueid == 0x5517) { /* SiS 961/961B */
 
 				lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
-				pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
 				pci_read_config_byte(dev, 0x49, &prefctl);
 				pci_dev_put(lpc_bridge);
 
-				if (sbrev == 0x10 && (prefctl & 0x80)) {
+				if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
 					printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
 					chipset_family = ATA_133a;
 				} else {
@@ -796,10 +792,33 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
 	return 0;
 }
 
-static unsigned int __devinit ata66_sis5513 (ide_hwif_t *hwif)
+struct sis_laptop {
+	u16 device;
+	u16 subvendor;
+	u16 subdevice;
+};
+
+static const struct sis_laptop sis_laptop[] = {
+	/* devid, subvendor, subdev */
+	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
+	/* end marker */
+	{ 0, }
+};
+
+static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
 {
+	struct pci_dev *pdev = hwif->pci_dev;
+	const struct sis_laptop *lap = &sis_laptop[0];
 	u8 ata66 = 0;
 
+	while (lap->device) {
+		if (lap->device == pdev->device &&
+		    lap->subvendor == pdev->subsystem_vendor &&
+		    lap->subdevice == pdev->subsystem_device)
+			return ATA_CBL_PATA40_SHORT;
+		lap++;
+	}
+
 	if (chipset_family >= ATA_133) {
 		u16 regw = 0;
 		u16 reg_addr = hwif->channel ? 0x52: 0x50;
@@ -811,7 +830,8 @@ static unsigned int __devinit ata66_sis5513 (ide_hwif_t *hwif)
 		pci_read_config_byte(hwif->pci_dev, 0x48, &reg48h);
 		ata66 = (reg48h & mask) ? 0 : 1;
 	}
-        return ata66;
+
+	return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 }
 
 static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
@@ -841,8 +861,8 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
 	if (!chipset_family)
 		return;
 
-	if (!(hwif->udma_four))
-		hwif->udma_four = ata66_sis5513(hwif);
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = ata66_sis5513(hwif);
 
 	if (chipset_family > ATA_16) {
 		hwif->ide_dma_check = &sis5513_config_xfer_rate;
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 7c383d9cc472..a7323d278c49 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -195,7 +195,7 @@ static inline void sl82c105_reset_host(struct pci_dev *dev)
  * This function is called when the IDE timer expires, the drive
  * indicates that it is READY, and we were waiting for DMA to complete.
  */
-static int sl82c105_ide_dma_lostirq(ide_drive_t *drive)
+static void sl82c105_dma_lost_irq(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
@@ -222,9 +222,6 @@ static int sl82c105_ide_dma_lostirq(ide_drive_t *drive)
 	}
 
 	sl82c105_reset_host(dev);
-
-	/* __ide_dma_lostirq would return 1, so we do as well */
-	return 1;
 }
 
 /*
@@ -244,15 +241,12 @@ static void sl82c105_dma_start(ide_drive_t *drive)
 	ide_dma_start(drive);
 }
 
-static int sl82c105_ide_dma_timeout(ide_drive_t *drive)
+static void sl82c105_dma_timeout(ide_drive_t *drive)
 {
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= hwif->pci_dev;
+	DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name));
 
-	DBG(("sl82c105_ide_dma_timeout(drive:%s)\n", drive->name));
-
-	sl82c105_reset_host(dev);
-	return __ide_dma_timeout(drive);
+	sl82c105_reset_host(HWIF(drive)->pci_dev);
+	ide_dma_timeout(drive);
 }
 
 static int sl82c105_ide_dma_on(ide_drive_t *drive)
@@ -344,7 +338,6 @@ static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio)
 static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
 {
 	struct pci_dev *bridge;
-	u8 rev;
 
 	/*
 	 * The bridge should be part of the same device, but function 0.
@@ -366,10 +359,9 @@ static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
 	/*
 	 * We need to find function 0's revision, not function 1
 	 */
-	pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
 	pci_dev_put(bridge);
 
-	return rev;
+	return bridge->revision;
 }
 
 /*
@@ -441,9 +433,9 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
 	hwif->ide_dma_check		= &sl82c105_ide_dma_check;
 	hwif->ide_dma_on		= &sl82c105_ide_dma_on;
 	hwif->dma_off_quietly		= &sl82c105_dma_off_quietly;
-	hwif->ide_dma_lostirq		= &sl82c105_ide_dma_lostirq;
+	hwif->dma_lost_irq		= &sl82c105_dma_lost_irq;
 	hwif->dma_start			= &sl82c105_dma_start;
-	hwif->ide_dma_timeout		= &sl82c105_ide_dma_timeout;
+	hwif->dma_timeout		= &sl82c105_dma_timeout;
 
 	if (!noautodma)
 		hwif->autodma = 1;
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index c40f291f91e0..575dbbd8b482 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -199,10 +199,9 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
 	hwif->mwdma_mask = 0x06;
 	hwif->swdma_mask = 0x04;
 
-	if (!hwif->udma_four) {
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
 		/* bit[0(1)]: 0:80, 1:40 */
-		hwif->udma_four = (reg47 & mask) ? 0 : 1;
-	}
+		hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 
 	hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate;
 
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index cee619bb2eaf..8de1f8e22494 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -220,13 +220,13 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
 	hwif->ide_dma_check	= &tc86c001_config_drive_xfer_rate;
 	hwif->dma_start 	= &tc86c001_dma_start;
 
-	if (!hwif->udma_four) {
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
 		/*
 		 * System Control  1 Register bit 13 (PDIAGN):
 		 * 0=80-pin cable, 1=40-pin cable
 		 */
 		scr1 = hwif->INW(sc_base + 0x00);
-		hwif->udma_four = (scr1 & 0x2000) ? 0 : 1;
+		hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 	}
 
 	if (!noautodma)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a508550c4095..27e92fb9f95e 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,6 +1,6 @@
 /*
  *
- * Version 3.38
+ * Version 3.45
  *
  * VIA IDE driver for Linux. Supported southbridges:
  *
@@ -9,6 +9,7 @@
  *   vt8235, vt8237, vt8237a
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
+ * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
  *
  * Based on the work of:
  *	Michel Aubry
@@ -33,6 +34,8 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ide.h>
+#include <linux/dmi.h>
+
 #include <asm/io.h>
 
 #ifdef CONFIG_PPC_CHRP
@@ -41,8 +44,6 @@
 
 #include "ide-timing.h"
 
-#define DISPLAY_VIA_TIMINGS
-
 #define VIA_IDE_ENABLE		0x40
 #define VIA_IDE_CONFIG		0x41
 #define VIA_FIFO_CONFIG		0x43
@@ -54,18 +55,12 @@
 #define VIA_ADDRESS_SETUP	0x4c
 #define VIA_UDMA_TIMING		0x50
 
-#define VIA_UDMA		0x007
-#define VIA_UDMA_NONE		0x000
-#define VIA_UDMA_33		0x001
-#define VIA_UDMA_66		0x002
-#define VIA_UDMA_100		0x003
-#define VIA_UDMA_133		0x004
-#define VIA_BAD_PREQ		0x010	/* Crashes if PREQ# till DDACK# set */
-#define VIA_BAD_CLK66		0x020	/* 66 MHz clock doesn't work correctly */
-#define VIA_SET_FIFO		0x040	/* Needs to have FIFO split set */
-#define VIA_NO_UNMASK		0x080	/* Doesn't work with IRQ unmasking on */
-#define VIA_BAD_ID		0x100	/* Has wrong vendor ID (0x1107) */
-#define VIA_BAD_AST		0x200	/* Don't touch Address Setup Timing */
+#define VIA_BAD_PREQ		0x01 /* Crashes if PREQ# till DDACK# set */
+#define VIA_BAD_CLK66		0x02 /* 66 MHz clock doesn't work correctly */
+#define VIA_SET_FIFO		0x04 /* Needs to have FIFO split set */
+#define VIA_NO_UNMASK		0x08 /* Doesn't work with IRQ unmasking on */
+#define VIA_BAD_ID		0x10 /* Has wrong vendor ID (0x1107) */
+#define VIA_BAD_AST		0x20 /* Don't touch Address Setup Timing */
 
 /*
  * VIA SouthBridge chips.
@@ -76,36 +71,37 @@ static struct via_isa_bridge {
 	u16 id;
 	u8 rev_min;
 	u8 rev_max;
-	u16 flags;
+	u8 udma_mask;
+	u8 flags;
 } via_isa_bridges[] = {
-	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
-	{ "vt8233c",	PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, VIA_UDMA_100 },
-	{ "vt8233",	PCI_DEVICE_ID_VIA_8233_0,   0x00, 0x2f, VIA_UDMA_100 },
-	{ "vt8231",	PCI_DEVICE_ID_VIA_8231,     0x00, 0x2f, VIA_UDMA_100 },
-	{ "vt82c686b",	PCI_DEVICE_ID_VIA_82C686,   0x40, 0x4f, VIA_UDMA_100 },
-	{ "vt82c686a",	PCI_DEVICE_ID_VIA_82C686,   0x10, 0x2f, VIA_UDMA_66 },
-	{ "vt82c686",	PCI_DEVICE_ID_VIA_82C686,   0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
-	{ "vt82c596b",	PCI_DEVICE_ID_VIA_82C596,   0x10, 0x2f, VIA_UDMA_66 },
-	{ "vt82c596a",	PCI_DEVICE_ID_VIA_82C596,   0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
-	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO },
-	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
-	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
-	{ "vt82c586a",	PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
-	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
-	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
-	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8237a",	PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
+	{ "vt8233c",	PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, ATA_UDMA5, },
+	{ "vt8233",	PCI_DEVICE_ID_VIA_8233_0,   0x00, 0x2f, ATA_UDMA5, },
+	{ "vt8231",	PCI_DEVICE_ID_VIA_8231,     0x00, 0x2f, ATA_UDMA5, },
+	{ "vt82c686b",	PCI_DEVICE_ID_VIA_82C686,   0x40, 0x4f, ATA_UDMA5, },
+	{ "vt82c686a",	PCI_DEVICE_ID_VIA_82C686,   0x10, 0x2f, ATA_UDMA4, },
+	{ "vt82c686",	PCI_DEVICE_ID_VIA_82C686,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+	{ "vt82c596b",	PCI_DEVICE_ID_VIA_82C596,   0x10, 0x2f, ATA_UDMA4, },
+	{ "vt82c596a",	PCI_DEVICE_ID_VIA_82C596,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
+	{ "vt82c586b",	PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
+	{ "vt82c586a",	PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
+	{ "vt82c586",	PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f,      0x00, VIA_SET_FIFO },
+	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
+	{ "vt82c576",	PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
 	{ NULL }
 };
 
 static unsigned int via_clock;
-static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
+static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
 
 struct via82cxxx_dev
 {
@@ -140,12 +136,12 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 	pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
 		((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
 
-	switch (vdev->via_config->flags & VIA_UDMA) {
-		case VIA_UDMA_33:  t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
-		case VIA_UDMA_66:  t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
-		case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
-		case VIA_UDMA_133: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
-		default: return;
+	switch (vdev->via_config->udma_mask) {
+	case ATA_UDMA2: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
+	case ATA_UDMA4: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
+	case ATA_UDMA5: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
+	case ATA_UDMA6: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
+	default: return;
 	}
 
 	pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
@@ -173,12 +169,12 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
 
 	T = 1000000000 / via_clock;
 
-	switch (vdev->via_config->flags & VIA_UDMA) {
-		case VIA_UDMA_33:   UT = T;   break;
-		case VIA_UDMA_66:   UT = T/2; break;
-		case VIA_UDMA_100:  UT = T/3; break;
-		case VIA_UDMA_133:  UT = T/4; break;
-		default: UT = T;
+	switch (vdev->via_config->udma_mask) {
+	case ATA_UDMA2: UT = T;   break;
+	case ATA_UDMA4: UT = T/2; break;
+	case ATA_UDMA5: UT = T/3; break;
+	case ATA_UDMA6: UT = T/4; break;
+	default:	UT = T;
 	}
 
 	ide_timing_compute(drive, speed, &t, T, UT);
@@ -208,8 +204,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
 static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
 {
 	if (pio == 255) {
-		via_set_drive(drive,
-			ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
+		via_set_drive(drive, ide_find_best_pio_mode(drive));
 		return;
 	}
 
@@ -226,16 +221,10 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
  
 static int via82cxxx_ide_dma_check (ide_drive_t *drive)
 {
-	ide_hwif_t *hwif = HWIF(drive);
-	struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
-	u16 w80 = hwif->udma_four;
+	u8 speed = ide_max_dma_mode(drive);
 
-	u16 speed = ide_find_best_mode(drive,
-		XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
-		(vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
-		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
-		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
-		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
+	if (speed == 0)
+		speed = ide_find_best_pio_mode(drive);
 
 	via_set_drive(drive, speed);
 
@@ -248,16 +237,14 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive)
 static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
 {
 	struct via_isa_bridge *via_config;
-	u8 t;
 
 	for (via_config = via_isa_bridges; via_config->id; via_config++)
 		if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
 			!!(via_config->flags & VIA_BAD_ID),
 			via_config->id, NULL))) {
 
-			pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
-			if (t >= via_config->rev_min &&
-			    t <= via_config->rev_max)
+			if ((*isa)->revision >= via_config->rev_min &&
+			    (*isa)->revision <= via_config->rev_max)
 				break;
 			pci_dev_put(*isa);
 		}
@@ -272,8 +259,8 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 {
 	int i;
 
-	switch (vdev->via_config->flags & VIA_UDMA) {
-		case VIA_UDMA_66:
+	switch (vdev->via_config->udma_mask) {
+		case ATA_UDMA4:
 			for (i = 24; i >= 0; i -= 8)
 				if (((u >> (i & 16)) & 8) &&
 				    ((u >> i) & 0x20) &&
@@ -286,7 +273,7 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 				}
 			break;
 
-		case VIA_UDMA_100:
+		case ATA_UDMA5:
 			for (i = 24; i >= 0; i -= 8)
 				if (((u >> i) & 0x10) ||
 				    (((u >> i) & 0x20) &&
@@ -298,7 +285,7 @@ static void __devinit via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 				}
 			break;
 
-		case VIA_UDMA_133:
+		case ATA_UDMA6:
 			for (i = 24; i >= 0; i -= 8)
 				if (((u >> i) & 0x10) ||
 				    (((u >> i) & 0x20) &&
@@ -353,7 +340,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
 
 	via_cable_detect(vdev, u);
 
-	if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) {
+	if (via_config->udma_mask == ATA_UDMA4) {
 		/* Enable Clk66 */
 		pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
 	} else if (via_config->flags & VIA_BAD_CLK66) {
@@ -415,17 +402,54 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
 	 * Print the boot message.
 	 */
 
-	pci_read_config_byte(isa, PCI_REVISION_ID, &t);
-	printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %s "
+	printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
 		"controller on pci%s\n",
-		via_config->name, t,
-		via_dma[via_config->flags & VIA_UDMA],
+		via_config->name, isa->revision,
+		via_config->udma_mask ? "U" : "MW",
+		via_dma[via_config->udma_mask ?
+			(fls(via_config->udma_mask) - 1) : 0],
 		pci_name(dev));
 
 	pci_dev_put(isa);
 	return 0;
 }
 
+/*
+ *	Cable special cases
+ */
+
+static struct dmi_system_id cable_dmi_table[] = {
+	{
+		.ident = "Acer Ferrari 3400",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
+			DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
+		},
+	},
+	{ }
+};
+
+static int via_cable_override(void)
+{
+	/* Systems by DMI */
+	if (dmi_check_system(cable_dmi_table))
+		return 1;
+	return 0;
+}
+
+static u8 __devinit via82cxxx_cable_detect(ide_hwif_t *hwif)
+{
+	struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
+
+	if (via_cable_override())
+		return ATA_CBL_PATA40_SHORT;
+
+	if ((vdev->via_80w >> hwif->channel) & 1)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
 static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 {
 	struct via82cxxx_dev *vdev = pci_get_drvdata(hwif->pci_dev);
@@ -454,12 +478,14 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 		return;
 
 	hwif->atapi_dma = 1;
-	hwif->ultra_mask = 0x7f;
+
+	hwif->ultra_mask = vdev->via_config->udma_mask;
 	hwif->mwdma_mask = 0x07;
 	hwif->swdma_mask = 0x07;
 
-	if (!hwif->udma_four)
-		hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1;
+	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+		hwif->cbl = via82cxxx_cable_detect(hwif);
+
 	hwif->ide_dma_check = &via82cxxx_ide_dma_check;
 	if (!noautodma)
 		hwif->autodma = 1;
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 45fc36f0f219..e46f47206542 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -942,8 +942,8 @@ pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
 				return 1;
 		case XFER_UDMA_4:
 		case XFER_UDMA_3:
-			if (HWIF(drive)->udma_four == 0)
-				return 1;		
+			if (drive->hwif->cbl != ATA_CBL_PATA80)
+				return 1;
 		case XFER_UDMA_2:
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
@@ -1244,7 +1244,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
 	hwif->chipset = ide_pmac;
 	hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET] || pmif->mediabay;
 	hwif->hold = pmif->mediabay;
-	hwif->udma_four = pmif->cable_80;
+	hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 	hwif->drives[0].unmask = 1;
 	hwif->drives[1].unmask = 1;
 	hwif->tuneproc = pmac_ide_tuneproc;
@@ -1821,28 +1821,11 @@ pmac_ide_dma_check(ide_drive_t *drive)
 		enable = 0;
 
 	if (enable) {
-		short mode;
-		
-		map = XFER_MWDMA;
-		if (pmif->kind == controller_kl_ata4
-		    || pmif->kind == controller_un_ata6
-		    || pmif->kind == controller_k2_ata6
-		    || pmif->kind == controller_sh_ata6) {
-			map |= XFER_UDMA;
-			if (pmif->cable_80) {
-				map |= XFER_UDMA_66;
-				if (pmif->kind == controller_un_ata6 ||
-				    pmif->kind == controller_k2_ata6 ||
-				    pmif->kind == controller_sh_ata6)
-					map |= XFER_UDMA_100;
-				if (pmif->kind == controller_sh_ata6)
-					map |= XFER_UDMA_133;
-			}
-		}
-		mode = ide_find_best_mode(drive, map);
-		if (mode & XFER_UDMA)
+		u8 mode = ide_max_dma_mode(drive);
+
+		if (mode >= XFER_UDMA_0)
 			drive->using_dma = pmac_ide_udma_enable(drive, mode);
-		else if (mode & XFER_MWDMA)
+		else if (mode >= XFER_MW_DMA_0)
 			drive->using_dma = pmac_ide_mdma_enable(drive, mode);
 		hwif->OUTB(0, IDE_CONTROL_REG);
 		/* Apply settings to controller */
@@ -2004,20 +1987,19 @@ static void pmac_ide_dma_host_on(ide_drive_t *drive)
 {
 }
 
-static int
-pmac_ide_dma_lostirq (ide_drive_t *drive)
+static void
+pmac_ide_dma_lost_irq (ide_drive_t *drive)
 {
 	pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
 	volatile struct dbdma_regs __iomem *dma;
 	unsigned long status;
 
 	if (pmif == NULL)
-		return 0;
+		return;
 	dma = pmif->dma_regs;
 
 	status = readl(&dma->status);
 	printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
-	return 0;
 }
 
 /*
@@ -2057,8 +2039,8 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
 	hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq;
 	hwif->dma_host_off = &pmac_ide_dma_host_off;
 	hwif->dma_host_on = &pmac_ide_dma_host_on;
-	hwif->ide_dma_timeout = &__ide_dma_timeout;
-	hwif->ide_dma_lostirq = &pmac_ide_dma_lostirq;
+	hwif->dma_timeout = &ide_dma_timeout;
+	hwif->dma_lost_irq = &pmac_ide_dma_lost_irq;
 
 	hwif->atapi_dma = 1;
 	switch(pmif->kind) {
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 208141377612..65722117ab6e 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -2280,7 +2280,7 @@ static void dv1394_remove_host(struct hpsb_host *host)
 	} while (video);
 
 	if (found_ohci_card)
-		class_device_destroy(hpsb_protocol_class, MKDEV(IEEE1394_MAJOR,
+		device_destroy(hpsb_protocol_class, MKDEV(IEEE1394_MAJOR,
 			   IEEE1394_MINOR_BLOCK_DV1394 * 16 + (host->id << 2)));
 }
 
@@ -2295,9 +2295,9 @@ static void dv1394_add_host(struct hpsb_host *host)
 
 	ohci = (struct ti_ohci *)host->hostdata;
 
-	class_device_create(hpsb_protocol_class, NULL, MKDEV(
-		IEEE1394_MAJOR,	IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)), 
-		NULL, "dv1394-%d", id);
+	device_create(hpsb_protocol_class, NULL, MKDEV(
+		IEEE1394_MAJOR,	IEEE1394_MINOR_BLOCK_DV1394 * 16 + (id<<2)),
+		"dv1394-%d", id);
 
 	dv1394_init(ohci, DV1394_NTSC, MODE_RECEIVE);
 	dv1394_init(ohci, DV1394_NTSC, MODE_TRANSMIT);
diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c
index 7c13fb3c167b..93362eed94ed 100644
--- a/drivers/ieee1394/eth1394.c
+++ b/drivers/ieee1394/eth1394.c
@@ -599,9 +599,7 @@ static void ether1394_add_host(struct hpsb_host *host)
 	}
 
 	SET_MODULE_OWNER(dev);
-
-	/* This used to be &host->device in Linux 2.6.20 and before. */
-	SET_NETDEV_DEV(dev, host->device.parent);
+	SET_NETDEV_DEV(dev, &host->device);
 
 	priv = netdev_priv(dev);
 	INIT_LIST_HEAD(&priv->ip_node_list);
diff --git a/drivers/ieee1394/highlevel.c b/drivers/ieee1394/highlevel.c
index 83a493312751..b6425469b6ee 100644
--- a/drivers/ieee1394/highlevel.c
+++ b/drivers/ieee1394/highlevel.c
@@ -483,37 +483,6 @@ int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
 	return retval;
 }
 
-/**
- * hpsb_listen_channel - enable receving a certain isochronous channel
- *
- * Reception is handled through the @hl's iso_receive op.
- */
-int hpsb_listen_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
-			unsigned int channel)
-{
-	if (channel > 63) {
-		HPSB_ERR("%s called with invalid channel", __FUNCTION__);
-		return -EINVAL;
-	}
-	if (host->iso_listen_count[channel]++ == 0)
-		return host->driver->devctl(host, ISO_LISTEN_CHANNEL, channel);
-	return 0;
-}
-
-/**
- * hpsb_unlisten_channel - disable receving a certain isochronous channel
- */
-void hpsb_unlisten_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
-			   unsigned int channel)
-{
-	if (channel > 63) {
-		HPSB_ERR("%s called with invalid channel", __FUNCTION__);
-		return;
-	}
-	if (--host->iso_listen_count[channel] == 0)
-		host->driver->devctl(host, ISO_UNLISTEN_CHANNEL, channel);
-}
-
 static void init_hpsb_highlevel(struct hpsb_host *host)
 {
 	INIT_LIST_HEAD(&dummy_zero_addr.host_list);
@@ -570,20 +539,6 @@ void highlevel_host_reset(struct hpsb_host *host)
 	read_unlock_irqrestore(&hl_irqs_lock, flags);
 }
 
-void highlevel_iso_receive(struct hpsb_host *host, void *data, size_t length)
-{
-	unsigned long flags;
-	struct hpsb_highlevel *hl;
-	int channel = (((quadlet_t *)data)[0] >> 8) & 0x3f;
-
-	read_lock_irqsave(&hl_irqs_lock, flags);
-	list_for_each_entry(hl, &hl_irqs, irq_list) {
-		if (hl->iso_receive)
-			hl->iso_receive(host, channel, data, length);
-	}
-	read_unlock_irqrestore(&hl_irqs_lock, flags);
-}
-
 void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction,
 			   void *data, size_t length)
 {
diff --git a/drivers/ieee1394/highlevel.h b/drivers/ieee1394/highlevel.h
index 63474f7ee69d..eb9fe321e09a 100644
--- a/drivers/ieee1394/highlevel.h
+++ b/drivers/ieee1394/highlevel.h
@@ -26,9 +26,7 @@ struct hpsb_address_serve {
 struct hpsb_highlevel {
 	const char *name;
 
-	/* Any of the following pointers can legally be NULL, except for
-	 * iso_receive which can only be NULL when you don't request
-	 * channels. */
+	/* Any of the following pointers can legally be NULL. */
 
 	/* New host initialized.  Will also be called during
 	 * hpsb_register_highlevel for all hosts already installed. */
@@ -43,13 +41,6 @@ struct hpsb_highlevel {
 	 * You can not expect to be able to do stock hpsb_reads. */
 	void (*host_reset)(struct hpsb_host *host);
 
-	/* An isochronous packet was received.  Channel contains the channel
-	 * number for your convenience, it is also contained in the included
-	 * packet header (first quadlet, CRCs are missing).  You may get called
-	 * for channel/host combinations you did not request. */
-	void (*iso_receive)(struct hpsb_host *host, int channel,
-			    quadlet_t *data, size_t length);
-
 	/* A write request was received on either the FCP_COMMAND (direction =
 	 * 0) or the FCP_RESPONSE (direction = 1) register.  The cts arg
 	 * contains the cts field (first byte of data). */
@@ -109,7 +100,6 @@ int highlevel_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
 int highlevel_lock64(struct hpsb_host *host, int nodeid, octlet_t *store,
 		     u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
 		     u16 flags);
-void highlevel_iso_receive(struct hpsb_host *host, void *data, size_t length);
 void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction,
 			   void *data, size_t length);
 
@@ -125,10 +115,6 @@ int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
 			    struct hpsb_address_ops *ops, u64 start, u64 end);
 int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
 			      u64 start);
-int hpsb_listen_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
-			unsigned int channel);
-void hpsb_unlisten_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
-			   unsigned int channel);
 
 void *hpsb_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
 void *hpsb_create_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
diff --git a/drivers/ieee1394/hosts.c b/drivers/ieee1394/hosts.c
index bd0755c789c5..8dd09d850419 100644
--- a/drivers/ieee1394/hosts.c
+++ b/drivers/ieee1394/hosts.c
@@ -154,15 +154,16 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
 
 	memcpy(&h->device, &nodemgr_dev_template_host, sizeof(h->device));
 	h->device.parent = dev;
+	set_dev_node(&h->device, dev_to_node(dev));
 	snprintf(h->device.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
 
-	h->class_dev.dev = &h->device;
-	h->class_dev.class = &hpsb_host_class;
-	snprintf(h->class_dev.class_id, BUS_ID_SIZE, "fw-host%d", h->id);
+	h->host_dev.parent = &h->device;
+	h->host_dev.class = &hpsb_host_class;
+	snprintf(h->host_dev.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
 
 	if (device_register(&h->device))
 		goto fail;
-	if (class_device_register(&h->class_dev)) {
+	if (device_register(&h->host_dev)) {
 		device_unregister(&h->device);
 		goto fail;
 	}
@@ -202,7 +203,7 @@ void hpsb_remove_host(struct hpsb_host *host)
 	host->driver = &dummy_driver;
 	highlevel_remove_host(host);
 
-	class_device_unregister(&host->class_dev);
+	device_unregister(&host->host_dev);
 	device_unregister(&host->device);
 }
 
diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h
index feb55d032294..e4e8aeb4d778 100644
--- a/drivers/ieee1394/hosts.h
+++ b/drivers/ieee1394/hosts.h
@@ -28,8 +28,6 @@ struct hpsb_host {
 	struct timer_list timeout;
 	unsigned long timeout_interval;
 
-	unsigned char iso_listen_count[64];
-
 	int node_count;      /* number of identified nodes on this bus */
 	int selfid_count;    /* total number of SelfIDs received */
 	int nodes_active;    /* number of nodes with active link layer */
@@ -57,7 +55,7 @@ struct hpsb_host {
 	struct hpsb_host_driver *driver;
 	struct pci_dev *pdev;
 	struct device device;
-	struct class_device class_dev;
+	struct device host_dev;
 
 	struct delayed_work delayed_reset;
 	unsigned config_roms:31;
@@ -99,12 +97,6 @@ enum devctl_cmd {
 	/* Cancel all outstanding async requests without resetting the bus.
 	 * Return void. */
 	CANCEL_REQUESTS,
-
-	/* Start or stop receiving isochronous channel in arg.  Return void.
-	 * This acts as an optimization hint, hosts are not required not to
-	 * listen on unrequested channels. */
-	ISO_LISTEN_CHANNEL,
-	ISO_UNLISTEN_CHANNEL
 };
 
 enum isoctl_cmd {
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index 8f71b6a06aa0..0fc8c6e559e4 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -1028,11 +1028,6 @@ void hpsb_packet_received(struct hpsb_host *host, quadlet_t *data, size_t size,
 		handle_incoming_packet(host, tcode, data, size, write_acked);
 		break;
 
-
-	case TCODE_ISO_DATA:
-		highlevel_iso_receive(host, data, size);
-		break;
-
 	case TCODE_CYCLE_START:
 		/* simply ignore this packet if it is passed on */
 		break;
@@ -1316,7 +1311,6 @@ EXPORT_SYMBOL(hpsb_make_streampacket);
 EXPORT_SYMBOL(hpsb_make_lockpacket);
 EXPORT_SYMBOL(hpsb_make_lock64packet);
 EXPORT_SYMBOL(hpsb_make_phypacket);
-EXPORT_SYMBOL(hpsb_make_isopacket);
 EXPORT_SYMBOL(hpsb_read);
 EXPORT_SYMBOL(hpsb_write);
 EXPORT_SYMBOL(hpsb_packet_success);
@@ -1327,8 +1321,6 @@ EXPORT_SYMBOL(hpsb_unregister_highlevel);
 EXPORT_SYMBOL(hpsb_register_addrspace);
 EXPORT_SYMBOL(hpsb_unregister_addrspace);
 EXPORT_SYMBOL(hpsb_allocate_and_register_addrspace);
-EXPORT_SYMBOL(hpsb_listen_channel);
-EXPORT_SYMBOL(hpsb_unlisten_channel);
 EXPORT_SYMBOL(hpsb_get_hostinfo);
 EXPORT_SYMBOL(hpsb_create_hostinfo);
 EXPORT_SYMBOL(hpsb_destroy_hostinfo);
diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h
index ad526523d0ef..21d50f73a210 100644
--- a/drivers/ieee1394/ieee1394_core.h
+++ b/drivers/ieee1394/ieee1394_core.h
@@ -24,9 +24,8 @@ struct hpsb_packet {
 
 	nodeid_t node_id;
 
-	/* Async and Iso types should be clear, raw means send-as-is, do not
-	 * CRC!  Byte swapping shall still be done in this case. */
-	enum { hpsb_async, hpsb_iso, hpsb_raw } __attribute__((packed)) type;
+	/* hpsb_raw = send as-is, do not CRC (but still byte-swap it) */
+	enum { hpsb_async, hpsb_raw } __attribute__((packed)) type;
 
 	/* Okay, this is core internal and a no care for hosts.
 	 * queued   = queued for sending
@@ -37,7 +36,7 @@ struct hpsb_packet {
 		hpsb_unused, hpsb_queued, hpsb_pending, hpsb_complete
 	} __attribute__((packed)) state;
 
-	/* These are core internal. */
+	/* These are core-internal. */
 	signed char tlabel;
 	signed char ack_code;
 	unsigned char tcode;
@@ -62,11 +61,15 @@ struct hpsb_packet {
 	/* Store jiffies for implementing bus timeouts. */
 	unsigned long sendtime;
 
-	/* Sizes are in bytes. *data can be DMA-mapped. */
+	/* Core-internal.  */
 	size_t allocated_data_size;	/* as allocated */
+
+	/* Sizes are in bytes. To be set by caller of hpsb_alloc_packet. */
 	size_t data_size;		/* as filled in */
 	size_t header_size;		/* as filled in, not counting the CRC */
-	quadlet_t *data;
+
+	/* Buffers */
+	quadlet_t *data;		/* can be DMA-mapped */
 	quadlet_t header[5];
 	quadlet_t embedded_data[0];	/* keep as last member */
 };
diff --git a/drivers/ieee1394/ieee1394_transactions.c b/drivers/ieee1394/ieee1394_transactions.c
index 40078ce930c8..c39c70a8aa9f 100644
--- a/drivers/ieee1394/ieee1394_transactions.c
+++ b/drivers/ieee1394/ieee1394_transactions.c
@@ -89,18 +89,6 @@ static void fill_async_lock(struct hpsb_packet *packet, u64 addr, int extcode,
 	packet->expect_response = 1;
 }
 
-static void fill_iso_packet(struct hpsb_packet *packet, int length, int channel,
-			    int tag, int sync)
-{
-	packet->header[0] = (length << 16) | (tag << 14) | (channel << 8)
-	    | (TCODE_ISO_DATA << 4) | sync;
-
-	packet->header_size = 4;
-	packet->data_size = length;
-	packet->type = hpsb_iso;
-	packet->tcode = TCODE_ISO_DATA;
-}
-
 static void fill_phy_packet(struct hpsb_packet *packet, quadlet_t data)
 {
 	packet->header[0] = data;
@@ -491,24 +479,6 @@ struct hpsb_packet *hpsb_make_phypacket(struct hpsb_host *host, quadlet_t data)
 	return p;
 }
 
-struct hpsb_packet *hpsb_make_isopacket(struct hpsb_host *host,
-					int length, int channel,
-					int tag, int sync)
-{
-	struct hpsb_packet *p;
-
-	p = hpsb_alloc_packet(length);
-	if (!p)
-		return NULL;
-
-	p->host = host;
-	fill_iso_packet(p, length, channel, tag, sync);
-
-	p->generation = get_hpsb_generation(host);
-
-	return p;
-}
-
 /*
  * FIXME - these functions should probably read from / write to user space to
  * avoid in kernel buffers for user space callers
diff --git a/drivers/ieee1394/ieee1394_transactions.h b/drivers/ieee1394/ieee1394_transactions.h
index 86b8ee692ea7..d2d5bc3546d7 100644
--- a/drivers/ieee1394/ieee1394_transactions.h
+++ b/drivers/ieee1394/ieee1394_transactions.h
@@ -19,8 +19,6 @@ struct hpsb_packet *hpsb_make_lock64packet(struct hpsb_host *host,
 					   nodeid_t node, u64 addr, int extcode,
 					   octlet_t *data, octlet_t arg);
 struct hpsb_packet *hpsb_make_phypacket(struct hpsb_host *host, quadlet_t data);
-struct hpsb_packet *hpsb_make_isopacket(struct hpsb_host *host, int length,
-					int channel, int tag, int sync);
 struct hpsb_packet *hpsb_make_writepacket(struct hpsb_host *host,
 					  nodeid_t node, u64 addr,
 					  quadlet_t *buffer, size_t length);
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 81b3864d2ba7..c4d3d4131f01 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -19,6 +19,7 @@
 #include <linux/mutex.h>
 #include <linux/freezer.h>
 #include <asm/atomic.h>
+#include <asm/semaphore.h>
 
 #include "csr.h"
 #include "highlevel.h"
@@ -145,8 +146,6 @@ static struct csr1212_bus_ops nodemgr_csr_ops = {
  * but now we are much simpler because of the LDM.
  */
 
-static DEFINE_MUTEX(nodemgr_serialize);
-
 struct host_info {
 	struct hpsb_host *host;
 	struct list_head list;
@@ -154,7 +153,7 @@ struct host_info {
 };
 
 static int nodemgr_bus_match(struct device * dev, struct device_driver * drv);
-static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp,
+static int nodemgr_uevent(struct device *dev, char **envp, int num_envp,
 			  char *buffer, int buffer_size);
 static void nodemgr_resume_ne(struct node_entry *ne);
 static void nodemgr_remove_ne(struct node_entry *ne);
@@ -165,37 +164,38 @@ struct bus_type ieee1394_bus_type = {
 	.match		= nodemgr_bus_match,
 };
 
-static void host_cls_release(struct class_device *class_dev)
+static void host_cls_release(struct device *dev)
 {
-	put_device(&container_of((class_dev), struct hpsb_host, class_dev)->device);
+	put_device(&container_of((dev), struct hpsb_host, host_dev)->device);
 }
 
 struct class hpsb_host_class = {
 	.name		= "ieee1394_host",
-	.release	= host_cls_release,
+	.dev_release	= host_cls_release,
 };
 
-static void ne_cls_release(struct class_device *class_dev)
+static void ne_cls_release(struct device *dev)
 {
-	put_device(&container_of((class_dev), struct node_entry, class_dev)->device);
+	put_device(&container_of((dev), struct node_entry, node_dev)->device);
 }
 
 static struct class nodemgr_ne_class = {
 	.name		= "ieee1394_node",
-	.release	= ne_cls_release,
+	.dev_release	= ne_cls_release,
 };
 
-static void ud_cls_release(struct class_device *class_dev)
+static void ud_cls_release(struct device *dev)
 {
-	put_device(&container_of((class_dev), struct unit_directory, class_dev)->device);
+	put_device(&container_of((dev), struct unit_directory, unit_dev)->device);
 }
 
 /* The name here is only so that unit directory hotplug works with old
- * style hotplug, which only ever did unit directories anyway. */
+ * style hotplug, which only ever did unit directories anyway.
+ */
 static struct class nodemgr_ud_class = {
 	.name		= "ieee1394",
-	.release	= ud_cls_release,
-	.uevent		= nodemgr_uevent,
+	.dev_release	= ud_cls_release,
+	.dev_uevent	= nodemgr_uevent,
 };
 
 static struct hpsb_highlevel nodemgr_highlevel;
@@ -730,11 +730,11 @@ static DEFINE_MUTEX(nodemgr_serialize_remove_uds);
 
 static void nodemgr_remove_uds(struct node_entry *ne)
 {
-	struct class_device *cdev;
+	struct device *dev;
 	struct unit_directory *tmp, *ud;
 
-	/* Iteration over nodemgr_ud_class.children has to be protected by
-	 * nodemgr_ud_class.sem, but class_device_unregister() will eventually
+	/* Iteration over nodemgr_ud_class.devices has to be protected by
+	 * nodemgr_ud_class.sem, but device_unregister() will eventually
 	 * take nodemgr_ud_class.sem too. Therefore pick out one ud at a time,
 	 * release the semaphore, and then unregister the ud. Since this code
 	 * may be called from other contexts besides the knodemgrds, protect the
@@ -744,9 +744,9 @@ static void nodemgr_remove_uds(struct node_entry *ne)
 	for (;;) {
 		ud = NULL;
 		down(&nodemgr_ud_class.sem);
-		list_for_each_entry(cdev, &nodemgr_ud_class.children, node) {
-			tmp = container_of(cdev, struct unit_directory,
-					   class_dev);
+		list_for_each_entry(dev, &nodemgr_ud_class.devices, node) {
+			tmp = container_of(dev, struct unit_directory,
+					   unit_dev);
 			if (tmp->ne == ne) {
 				ud = tmp;
 				break;
@@ -755,7 +755,7 @@ static void nodemgr_remove_uds(struct node_entry *ne)
 		up(&nodemgr_ud_class.sem);
 		if (ud == NULL)
 			break;
-		class_device_unregister(&ud->class_dev);
+		device_unregister(&ud->unit_dev);
 		device_unregister(&ud->device);
 	}
 	mutex_unlock(&nodemgr_serialize_remove_uds);
@@ -772,10 +772,9 @@ static void nodemgr_remove_ne(struct node_entry *ne)
 
 	HPSB_DEBUG("Node removed: ID:BUS[" NODE_BUS_FMT "]  GUID[%016Lx]",
 		   NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid);
-
 	nodemgr_remove_uds(ne);
 
-	class_device_unregister(&ne->class_dev);
+	device_unregister(&ne->node_dev);
 	device_unregister(dev);
 
 	put_device(dev);
@@ -783,7 +782,9 @@ static void nodemgr_remove_ne(struct node_entry *ne)
 
 static int __nodemgr_remove_host_dev(struct device *dev, void *data)
 {
-	nodemgr_remove_ne(container_of(dev, struct node_entry, device));
+	if (dev->bus == &ieee1394_bus_type)
+		nodemgr_remove_ne(container_of(dev, struct node_entry,
+				  device));
 	return 0;
 }
 
@@ -850,14 +851,14 @@ static struct node_entry *nodemgr_create_node(octlet_t guid, struct csr1212_csr
 	snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx",
 		 (unsigned long long)(ne->guid));
 
-	ne->class_dev.dev = &ne->device;
-	ne->class_dev.class = &nodemgr_ne_class;
-	snprintf(ne->class_dev.class_id, BUS_ID_SIZE, "%016Lx",
-		 (unsigned long long)(ne->guid));
+	ne->node_dev.parent = &ne->device;
+	ne->node_dev.class = &nodemgr_ne_class;
+	snprintf(ne->node_dev.bus_id, BUS_ID_SIZE, "%016Lx",
+		(unsigned long long)(ne->guid));
 
 	if (device_register(&ne->device))
 		goto fail_devreg;
-	if (class_device_register(&ne->class_dev))
+	if (device_register(&ne->node_dev))
 		goto fail_classdevreg;
 	get_device(&ne->device);
 
@@ -885,12 +886,12 @@ fail_alloc:
 
 static struct node_entry *find_entry_by_guid(u64 guid)
 {
-	struct class_device *cdev;
+	struct device *dev;
 	struct node_entry *ne, *ret_ne = NULL;
 
 	down(&nodemgr_ne_class.sem);
-	list_for_each_entry(cdev, &nodemgr_ne_class.children, node) {
-		ne = container_of(cdev, struct node_entry, class_dev);
+	list_for_each_entry(dev, &nodemgr_ne_class.devices, node) {
+		ne = container_of(dev, struct node_entry, node_dev);
 
 		if (ne->guid == guid) {
 			ret_ne = ne;
@@ -906,12 +907,12 @@ static struct node_entry *find_entry_by_guid(u64 guid)
 static struct node_entry *find_entry_by_nodeid(struct hpsb_host *host,
 					       nodeid_t nodeid)
 {
-	struct class_device *cdev;
+	struct device *dev;
 	struct node_entry *ne, *ret_ne = NULL;
 
 	down(&nodemgr_ne_class.sem);
-	list_for_each_entry(cdev, &nodemgr_ne_class.children, node) {
-		ne = container_of(cdev, struct node_entry, class_dev);
+	list_for_each_entry(dev, &nodemgr_ne_class.devices, node) {
+		ne = container_of(dev, struct node_entry, node_dev);
 
 		if (ne->host == host && ne->nodeid == nodeid) {
 			ret_ne = ne;
@@ -935,14 +936,14 @@ static void nodemgr_register_device(struct node_entry *ne,
 	snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u",
 		 ne->device.bus_id, ud->id);
 
-	ud->class_dev.dev = &ud->device;
-	ud->class_dev.class = &nodemgr_ud_class;
-	snprintf(ud->class_dev.class_id, BUS_ID_SIZE, "%s-%u",
+	ud->unit_dev.parent = &ud->device;
+	ud->unit_dev.class = &nodemgr_ud_class;
+	snprintf(ud->unit_dev.bus_id, BUS_ID_SIZE, "%s-%u",
 		 ne->device.bus_id, ud->id);
 
 	if (device_register(&ud->device))
 		goto fail_devreg;
-	if (class_device_register(&ud->class_dev))
+	if (device_register(&ud->unit_dev))
 		goto fail_classdevreg;
 	get_device(&ud->device);
 
@@ -1159,7 +1160,7 @@ static void nodemgr_process_root_directory(struct host_info *hi, struct node_ent
 
 #ifdef CONFIG_HOTPLUG
 
-static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp,
+static int nodemgr_uevent(struct device *dev, char **envp, int num_envp,
 			  char *buffer, int buffer_size)
 {
 	struct unit_directory *ud;
@@ -1169,10 +1170,10 @@ static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp,
 	/* ieee1394:venNmoNspNverN */
 	char buf[8 + 1 + 3 + 8 + 2 + 8 + 2 + 8 + 3 + 8 + 1];
 
-	if (!cdev)
+	if (!dev)
 		return -ENODEV;
 
-	ud = container_of(cdev, struct unit_directory, class_dev);
+	ud = container_of(dev, struct unit_directory, unit_dev);
 
 	if (ud->ne->in_limbo || ud->ignore_driver)
 		return -ENODEV;
@@ -1207,7 +1208,7 @@ do {								\
 
 #else
 
-static int nodemgr_uevent(struct class_device *cdev, char **envp, int num_envp,
+static int nodemgr_uevent(struct device *dev, char **envp, int num_envp,
 			  char *buffer, int buffer_size)
 {
 	return -ENODEV;
@@ -1378,8 +1379,10 @@ static void nodemgr_node_scan(struct host_info *hi, int generation)
 
 static void nodemgr_suspend_ne(struct node_entry *ne)
 {
-	struct class_device *cdev;
+	struct device *dev;
 	struct unit_directory *ud;
+	struct device_driver *drv;
+	int error;
 
 	HPSB_DEBUG("Node suspended: ID:BUS[" NODE_BUS_FMT "]  GUID[%016Lx]",
 		   NODE_BUS_ARGS(ne->host, ne->nodeid), (unsigned long long)ne->guid);
@@ -1388,15 +1391,24 @@ static void nodemgr_suspend_ne(struct node_entry *ne)
 	WARN_ON(device_create_file(&ne->device, &dev_attr_ne_in_limbo));
 
 	down(&nodemgr_ud_class.sem);
-	list_for_each_entry(cdev, &nodemgr_ud_class.children, node) {
-		ud = container_of(cdev, struct unit_directory, class_dev);
+	list_for_each_entry(dev, &nodemgr_ud_class.devices, node) {
+		ud = container_of(dev, struct unit_directory, unit_dev);
 		if (ud->ne != ne)
 			continue;
 
-		if (ud->device.driver &&
-		    (!ud->device.driver->suspend ||
-		      ud->device.driver->suspend(&ud->device, PMSG_SUSPEND)))
+		drv = get_driver(ud->device.driver);
+		if (!drv)
+			continue;
+
+		error = 1; /* release if suspend is not implemented */
+		if (drv->suspend) {
+			down(&ud->device.sem);
+			error = drv->suspend(&ud->device, PMSG_SUSPEND);
+			up(&ud->device.sem);
+		}
+		if (error)
 			device_release_driver(&ud->device);
+		put_driver(drv);
 	}
 	up(&nodemgr_ud_class.sem);
 }
@@ -1404,20 +1416,29 @@ static void nodemgr_suspend_ne(struct node_entry *ne)
 
 static void nodemgr_resume_ne(struct node_entry *ne)
 {
-	struct class_device *cdev;
+	struct device *dev;
 	struct unit_directory *ud;
+	struct device_driver *drv;
 
 	ne->in_limbo = 0;
 	device_remove_file(&ne->device, &dev_attr_ne_in_limbo);
 
 	down(&nodemgr_ud_class.sem);
-	list_for_each_entry(cdev, &nodemgr_ud_class.children, node) {
-		ud = container_of(cdev, struct unit_directory, class_dev);
+	list_for_each_entry(dev, &nodemgr_ud_class.devices, node) {
+		ud = container_of(dev, struct unit_directory, unit_dev);
 		if (ud->ne != ne)
 			continue;
 
-		if (ud->device.driver && ud->device.driver->resume)
-			ud->device.driver->resume(&ud->device);
+		drv = get_driver(ud->device.driver);
+		if (!drv)
+			continue;
+
+		if (drv->resume) {
+			down(&ud->device.sem);
+			drv->resume(&ud->device);
+			up(&ud->device.sem);
+		}
+		put_driver(drv);
 	}
 	up(&nodemgr_ud_class.sem);
 
@@ -1428,23 +1449,32 @@ static void nodemgr_resume_ne(struct node_entry *ne)
 
 static void nodemgr_update_pdrv(struct node_entry *ne)
 {
+	struct device *dev;
 	struct unit_directory *ud;
+	struct device_driver *drv;
 	struct hpsb_protocol_driver *pdrv;
-	struct class_device *cdev;
+	int error;
 
 	down(&nodemgr_ud_class.sem);
-	list_for_each_entry(cdev, &nodemgr_ud_class.children, node) {
-		ud = container_of(cdev, struct unit_directory, class_dev);
+	list_for_each_entry(dev, &nodemgr_ud_class.devices, node) {
+		ud = container_of(dev, struct unit_directory, unit_dev);
 		if (ud->ne != ne)
 			continue;
 
-		if (ud->device.driver) {
-			pdrv = container_of(ud->device.driver,
-					    struct hpsb_protocol_driver,
-					    driver);
-			if (pdrv->update && pdrv->update(ud))
-				device_release_driver(&ud->device);
+		drv = get_driver(ud->device.driver);
+		if (!drv)
+			continue;
+
+		error = 0;
+		pdrv = container_of(drv, struct hpsb_protocol_driver, driver);
+		if (pdrv->update) {
+			down(&ud->device.sem);
+			error = pdrv->update(ud);
+			up(&ud->device.sem);
 		}
+		if (error)
+			device_release_driver(&ud->device);
+		put_driver(drv);
 	}
 	up(&nodemgr_ud_class.sem);
 }
@@ -1509,7 +1539,7 @@ static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int ge
 static void nodemgr_node_probe(struct host_info *hi, int generation)
 {
 	struct hpsb_host *host = hi->host;
-	struct class_device *cdev;
+	struct device *dev;
 	struct node_entry *ne;
 
 	/* Do some processing of the nodes we've probed. This pulls them
@@ -1522,13 +1552,13 @@ static void nodemgr_node_probe(struct host_info *hi, int generation)
 	 * improvement...) */
 
 	down(&nodemgr_ne_class.sem);
-	list_for_each_entry(cdev, &nodemgr_ne_class.children, node) {
-		ne = container_of(cdev, struct node_entry, class_dev);
+	list_for_each_entry(dev, &nodemgr_ne_class.devices, node) {
+		ne = container_of(dev, struct node_entry, node_dev);
 		if (!ne->needs_probe)
 			nodemgr_probe_ne(hi, ne, generation);
 	}
-	list_for_each_entry(cdev, &nodemgr_ne_class.children, node) {
-		ne = container_of(cdev, struct node_entry, class_dev);
+	list_for_each_entry(dev, &nodemgr_ne_class.devices, node) {
+		ne = container_of(dev, struct node_entry, node_dev);
 		if (ne->needs_probe)
 			nodemgr_probe_ne(hi, ne, generation);
 	}
@@ -1686,18 +1716,12 @@ static int nodemgr_host_thread(void *__hi)
 		if (kthread_should_stop())
 			goto exit;
 
-		if (mutex_lock_interruptible(&nodemgr_serialize)) {
-			if (try_to_freeze())
-				continue;
-			goto exit;
-		}
-
 		/* Pause for 1/4 second in 1/16 second intervals,
 		 * to make sure things settle down. */
 		g = get_hpsb_generation(host);
 		for (i = 0; i < 4 ; i++) {
 			if (msleep_interruptible(63) || kthread_should_stop())
-				goto unlock_exit;
+				goto exit;
 
 			/* Now get the generation in which the node ID's we collect
 			 * are valid.  During the bus scan we will use this generation
@@ -1715,7 +1739,6 @@ static int nodemgr_host_thread(void *__hi)
 		if (!nodemgr_check_irm_capability(host, reset_cycles) ||
 		    !nodemgr_do_irm_duties(host, reset_cycles)) {
 			reset_cycles++;
-			mutex_unlock(&nodemgr_serialize);
 			continue;
 		}
 		reset_cycles = 0;
@@ -1732,11 +1755,7 @@ static int nodemgr_host_thread(void *__hi)
 
 		/* Update some of our sysfs symlinks */
 		nodemgr_update_host_dev_links(host);
-
-		mutex_unlock(&nodemgr_serialize);
 	}
-unlock_exit:
-	mutex_unlock(&nodemgr_serialize);
 exit:
 	HPSB_VERBOSE("NodeMgr: Exiting thread");
 	return 0;
@@ -1756,13 +1775,13 @@ exit:
  */
 int nodemgr_for_each_host(void *data, int (*cb)(struct hpsb_host *, void *))
 {
-	struct class_device *cdev;
+	struct device *dev;
 	struct hpsb_host *host;
 	int error = 0;
 
 	down(&hpsb_host_class.sem);
-	list_for_each_entry(cdev, &hpsb_host_class.children, node) {
-		host = container_of(cdev, struct hpsb_host, class_dev);
+	list_for_each_entry(dev, &hpsb_host_class.devices, node) {
+		host = container_of(dev, struct hpsb_host, host_dev);
 
 		if ((error = cb(host, data)))
 			break;
diff --git a/drivers/ieee1394/nodemgr.h b/drivers/ieee1394/nodemgr.h
index 4530b29d941c..919e92e2a955 100644
--- a/drivers/ieee1394/nodemgr.h
+++ b/drivers/ieee1394/nodemgr.h
@@ -84,7 +84,7 @@ struct unit_directory {
 	int length;		/* Number of quadlets */
 
 	struct device device;
-	struct class_device class_dev;
+	struct device unit_dev;
 
 	struct csr1212_keyval *ud_kv;
 	u32 lun;		/* logical unit number immediate value */
@@ -107,7 +107,7 @@ struct node_entry {
 	u32 capabilities;
 
 	struct device device;
-	struct class_device class_dev;
+	struct device node_dev;
 
 	/* Means this node is not attached anymore */
 	int in_limbo;
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 5dadfd296f79..5667c8102efc 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -138,19 +138,6 @@ printk(KERN_INFO "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->
 #define DBGMSG(fmt, args...) do {} while (0)
 #endif
 
-#ifdef CONFIG_IEEE1394_OHCI_DMA_DEBUG
-#define OHCI_DMA_ALLOC(fmt, args...) \
-	HPSB_ERR("%s(%s)alloc(%d): "fmt, OHCI1394_DRIVER_NAME, __FUNCTION__, \
-		++global_outstanding_dmas, ## args)
-#define OHCI_DMA_FREE(fmt, args...) \
-	HPSB_ERR("%s(%s)free(%d): "fmt, OHCI1394_DRIVER_NAME, __FUNCTION__, \
-		--global_outstanding_dmas, ## args)
-static int global_outstanding_dmas = 0;
-#else
-#define OHCI_DMA_ALLOC(fmt, args...) do {} while (0)
-#define OHCI_DMA_FREE(fmt, args...) do {} while (0)
-#endif
-
 /* print general (card independent) information */
 #define PRINT_G(level, fmt, args...) \
 printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args)
@@ -170,7 +157,6 @@ static void dma_trm_reset(struct dma_trm_ctx *d);
 static int alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
 			     enum context_type type, int ctx, int num_desc,
 			     int buf_size, int split_buf_size, int context_base);
-static void stop_dma_rcv_ctx(struct dma_rcv_ctx *d);
 static void free_dma_rcv_ctx(struct dma_rcv_ctx *d);
 
 static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
@@ -533,9 +519,6 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	initialize_dma_trm_ctx(&ohci->at_req_context);
 	initialize_dma_trm_ctx(&ohci->at_resp_context);
 	
-	/* Initialize IR Legacy DMA channel mask */
-	ohci->ir_legacy_channels = 0;
-
 	/* Accept AR requests from all nodes */
 	reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
 
@@ -733,7 +716,6 @@ static void insert_packet(struct ti_ohci *ohci,
                                 pci_map_single(ohci->dev, packet->data,
                                                packet->data_size,
                                                PCI_DMA_TODEVICE));
-			OHCI_DMA_ALLOC("single, block transmit packet");
 
                         d->prg_cpu[idx]->end.branchAddress = 0;
                         d->prg_cpu[idx]->end.status = 0;
@@ -783,7 +765,6 @@ static void insert_packet(struct ti_ohci *ohci,
                 d->prg_cpu[idx]->end.address = cpu_to_le32(
 				pci_map_single(ohci->dev, packet->data,
 				packet->data_size, PCI_DMA_TODEVICE));
-		OHCI_DMA_ALLOC("single, iso transmit packet");
 
                 d->prg_cpu[idx]->end.branchAddress = 0;
                 d->prg_cpu[idx]->end.status = 0;
@@ -884,36 +865,9 @@ static int ohci_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
 		return -EOVERFLOW;
 	}
 
-	/* Decide whether we have an iso, a request, or a response packet */
 	if (packet->type == hpsb_raw)
 		d = &ohci->at_req_context;
-	else if ((packet->tcode == TCODE_ISO_DATA) && (packet->type == hpsb_iso)) {
-		/* The legacy IT DMA context is initialized on first
-		 * use.  However, the alloc cannot be run from
-		 * interrupt context, so we bail out if that is the
-		 * case. I don't see anyone sending ISO packets from
-		 * interrupt context anyway... */
-
-		if (ohci->it_legacy_context.ohci == NULL) {
-			if (in_interrupt()) {
-				PRINT(KERN_ERR,
-				      "legacy IT context cannot be initialized during interrupt");
-				return -EINVAL;
-			}
-
-			if (alloc_dma_trm_ctx(ohci, &ohci->it_legacy_context,
-					      DMA_CTX_ISO, 0, IT_NUM_DESC,
-					      OHCI1394_IsoXmitContextBase) < 0) {
-				PRINT(KERN_ERR,
-				      "error initializing legacy IT context");
-				return -ENOMEM;
-			}
-
-			initialize_dma_trm_ctx(&ohci->it_legacy_context);
-		}
-
-		d = &ohci->it_legacy_context;
-	} else if ((packet->tcode & 0x02) && (packet->tcode != TCODE_ISO_DATA))
+	else if ((packet->tcode & 0x02) && (packet->tcode != TCODE_ISO_DATA))
 		d = &ohci->at_resp_context;
 	else
 		d = &ohci->at_req_context;
@@ -932,9 +886,7 @@ static int ohci_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
 static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
 {
 	struct ti_ohci *ohci = host->hostdata;
-	int retval = 0;
-	unsigned long flags;
-	int phy_reg;
+	int retval = 0, phy_reg;
 
 	switch (cmd) {
 	case RESET_BUS:
@@ -1027,117 +979,6 @@ static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
 		dma_trm_reset(&ohci->at_resp_context);
 		break;
 
-	case ISO_LISTEN_CHANNEL:
-        {
-		u64 mask;
-		struct dma_rcv_ctx *d = &ohci->ir_legacy_context;
-		int ir_legacy_active;
-
-		if (arg<0 || arg>63) {
-			PRINT(KERN_ERR,
-			      "%s: IS0 listen channel %d is out of range",
-			      __FUNCTION__, arg);
-			return -EFAULT;
-		}
-
-		mask = (u64)0x1<<arg;
-
-                spin_lock_irqsave(&ohci->IR_channel_lock, flags);
-
-		if (ohci->ISO_channel_usage & mask) {
-			PRINT(KERN_ERR,
-			      "%s: IS0 listen channel %d is already used",
-			      __FUNCTION__, arg);
-			spin_unlock_irqrestore(&ohci->IR_channel_lock, flags);
-			return -EFAULT;
-		}
-
-		ir_legacy_active = ohci->ir_legacy_channels;
-
-		ohci->ISO_channel_usage |= mask;
-		ohci->ir_legacy_channels |= mask;
-
-                spin_unlock_irqrestore(&ohci->IR_channel_lock, flags);
-
-		if (!ir_legacy_active) {
-			if (ohci1394_register_iso_tasklet(ohci,
-					  &ohci->ir_legacy_tasklet) < 0) {
-				PRINT(KERN_ERR, "No IR DMA context available");
-				return -EBUSY;
-			}
-
-			/* the IR context can be assigned to any DMA context
-			 * by ohci1394_register_iso_tasklet */
-			d->ctx = ohci->ir_legacy_tasklet.context;
-			d->ctrlSet = OHCI1394_IsoRcvContextControlSet +
-				32*d->ctx;
-			d->ctrlClear = OHCI1394_IsoRcvContextControlClear +
-				32*d->ctx;
-			d->cmdPtr = OHCI1394_IsoRcvCommandPtr + 32*d->ctx;
-			d->ctxtMatch = OHCI1394_IsoRcvContextMatch + 32*d->ctx;
-
-			initialize_dma_rcv_ctx(&ohci->ir_legacy_context, 1);
-
-			if (printk_ratelimit())
-				DBGMSG("IR legacy activated");
-		}
-
-                spin_lock_irqsave(&ohci->IR_channel_lock, flags);
-
-		if (arg>31)
-			reg_write(ohci, OHCI1394_IRMultiChanMaskHiSet,
-				  1<<(arg-32));
-		else
-			reg_write(ohci, OHCI1394_IRMultiChanMaskLoSet,
-				  1<<arg);
-
-                spin_unlock_irqrestore(&ohci->IR_channel_lock, flags);
-                DBGMSG("Listening enabled on channel %d", arg);
-                break;
-        }
-	case ISO_UNLISTEN_CHANNEL:
-        {
-		u64 mask;
-
-		if (arg<0 || arg>63) {
-			PRINT(KERN_ERR,
-			      "%s: IS0 unlisten channel %d is out of range",
-			      __FUNCTION__, arg);
-			return -EFAULT;
-		}
-
-		mask = (u64)0x1<<arg;
-
-                spin_lock_irqsave(&ohci->IR_channel_lock, flags);
-
-		if (!(ohci->ISO_channel_usage & mask)) {
-			PRINT(KERN_ERR,
-			      "%s: IS0 unlisten channel %d is not used",
-			      __FUNCTION__, arg);
-			spin_unlock_irqrestore(&ohci->IR_channel_lock, flags);
-			return -EFAULT;
-		}
-
-		ohci->ISO_channel_usage &= ~mask;
-		ohci->ir_legacy_channels &= ~mask;
-
-		if (arg>31)
-			reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear,
-				  1<<(arg-32));
-		else
-			reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear,
-				  1<<arg);
-
-                spin_unlock_irqrestore(&ohci->IR_channel_lock, flags);
-                DBGMSG("Listening disabled on channel %d", arg);
-
-		if (ohci->ir_legacy_channels == 0) {
-			stop_dma_rcv_ctx(&ohci->ir_legacy_context);
-			DBGMSG("ISO legacy receive context stopped");
-		}
-
-                break;
-        }
 	default:
 		PRINT_G(KERN_ERR, "ohci_devctl cmd %d not implemented yet",
 			cmd);
@@ -2869,12 +2710,10 @@ static void dma_trm_tasklet (unsigned long data)
 		list_del_init(&packet->driver_list);
 		hpsb_packet_sent(ohci->host, packet, ack);
 
-		if (datasize) {
+		if (datasize)
 			pci_unmap_single(ohci->dev,
 					 cpu_to_le32(d->prg_cpu[d->sent_ind]->end.address),
 					 datasize, PCI_DMA_TODEVICE);
-			OHCI_DMA_FREE("single Xmit data packet");
-		}
 
 		d->sent_ind = (d->sent_ind+1)%d->num_desc;
 		d->free_prgs++;
@@ -2885,22 +2724,6 @@ static void dma_trm_tasklet (unsigned long data)
 	spin_unlock_irqrestore(&d->lock, flags);
 }
 
-static void stop_dma_rcv_ctx(struct dma_rcv_ctx *d)
-{
-	if (d->ctrlClear) {
-		ohci1394_stop_context(d->ohci, d->ctrlClear, NULL);
-
-		if (d->type == DMA_CTX_ISO) {
-			/* disable interrupts */
-			reg_write(d->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << d->ctx);
-			ohci1394_unregister_iso_tasklet(d->ohci, &d->ohci->ir_legacy_tasklet);
-		} else {
-			tasklet_kill(&d->task);
-		}
-	}
-}
-
-
 static void free_dma_rcv_ctx(struct dma_rcv_ctx *d)
 {
 	int i;
@@ -2913,23 +2736,19 @@ static void free_dma_rcv_ctx(struct dma_rcv_ctx *d)
 
 	if (d->buf_cpu) {
 		for (i=0; i<d->num_desc; i++)
-			if (d->buf_cpu[i] && d->buf_bus[i]) {
+			if (d->buf_cpu[i] && d->buf_bus[i])
 				pci_free_consistent(
 					ohci->dev, d->buf_size,
 					d->buf_cpu[i], d->buf_bus[i]);
-				OHCI_DMA_FREE("consistent dma_rcv buf[%d]", i);
-			}
 		kfree(d->buf_cpu);
 		kfree(d->buf_bus);
 	}
 	if (d->prg_cpu) {
 		for (i=0; i<d->num_desc; i++)
-			if (d->prg_cpu[i] && d->prg_bus[i]) {
-				pci_pool_free(d->prg_pool, d->prg_cpu[i], d->prg_bus[i]);
-				OHCI_DMA_FREE("consistent dma_rcv prg[%d]", i);
-			}
+			if (d->prg_cpu[i] && d->prg_bus[i])
+				pci_pool_free(d->prg_pool, d->prg_cpu[i],
+					      d->prg_bus[i]);
 		pci_pool_destroy(d->prg_pool);
-		OHCI_DMA_FREE("dma_rcv prg pool");
 		kfree(d->prg_cpu);
 		kfree(d->prg_bus);
 	}
@@ -2998,13 +2817,10 @@ alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
 	}
 	num_allocs++;
 
-	OHCI_DMA_ALLOC("dma_rcv prg pool");
-
 	for (i=0; i<d->num_desc; i++) {
 		d->buf_cpu[i] = pci_alloc_consistent(ohci->dev,
 						     d->buf_size,
 						     d->buf_bus+i);
-		OHCI_DMA_ALLOC("consistent dma_rcv buf[%d]", i);
 
 		if (d->buf_cpu[i] != NULL) {
 			memset(d->buf_cpu[i], 0, d->buf_size);
@@ -3016,7 +2832,6 @@ alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
 		}
 
 		d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i);
-		OHCI_DMA_ALLOC("pool dma_rcv prg[%d]", i);
 
                 if (d->prg_cpu[i] != NULL) {
                         memset(d->prg_cpu[i], 0, sizeof(struct dma_cmd));
@@ -3030,18 +2845,11 @@ alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d,
 
         spin_lock_init(&d->lock);
 
-	if (type == DMA_CTX_ISO) {
-		ohci1394_init_iso_tasklet(&ohci->ir_legacy_tasklet,
-					  OHCI_ISO_MULTICHANNEL_RECEIVE,
-					  dma_rcv_tasklet, (unsigned long) d);
-	} else {
-		d->ctrlSet = context_base + OHCI1394_ContextControlSet;
-		d->ctrlClear = context_base + OHCI1394_ContextControlClear;
-		d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
-
-		tasklet_init (&d->task, dma_rcv_tasklet, (unsigned long) d);
-	}
+	d->ctrlSet = context_base + OHCI1394_ContextControlSet;
+	d->ctrlClear = context_base + OHCI1394_ContextControlClear;
+	d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
 
+	tasklet_init(&d->task, dma_rcv_tasklet, (unsigned long) d);
 	return 0;
 }
 
@@ -3057,12 +2865,10 @@ static void free_dma_trm_ctx(struct dma_trm_ctx *d)
 
 	if (d->prg_cpu) {
 		for (i=0; i<d->num_desc; i++)
-			if (d->prg_cpu[i] && d->prg_bus[i]) {
-				pci_pool_free(d->prg_pool, d->prg_cpu[i], d->prg_bus[i]);
-				OHCI_DMA_FREE("pool dma_trm prg[%d]", i);
-			}
+			if (d->prg_cpu[i] && d->prg_bus[i])
+				pci_pool_free(d->prg_pool, d->prg_cpu[i],
+					      d->prg_bus[i]);
 		pci_pool_destroy(d->prg_pool);
-		OHCI_DMA_FREE("dma_trm prg pool");
 		kfree(d->prg_cpu);
 		kfree(d->prg_bus);
 	}
@@ -3108,11 +2914,8 @@ alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
 	}
 	num_allocs++;
 
-	OHCI_DMA_ALLOC("dma_rcv prg pool");
-
 	for (i = 0; i < d->num_desc; i++) {
 		d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, GFP_KERNEL, d->prg_bus+i);
-		OHCI_DMA_ALLOC("pool dma_trm prg[%d]", i);
 
                 if (d->prg_cpu[i] != NULL) {
                         memset(d->prg_cpu[i], 0, sizeof(struct at_dma_prg));
@@ -3127,28 +2930,10 @@ alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d,
         spin_lock_init(&d->lock);
 
 	/* initialize tasklet */
-	if (type == DMA_CTX_ISO) {
-		ohci1394_init_iso_tasklet(&ohci->it_legacy_tasklet, OHCI_ISO_TRANSMIT,
-					  dma_trm_tasklet, (unsigned long) d);
-		if (ohci1394_register_iso_tasklet(ohci,
-						  &ohci->it_legacy_tasklet) < 0) {
-			PRINT(KERN_ERR, "No IT DMA context available");
-			free_dma_trm_ctx(d);
-			return -EBUSY;
-		}
-
-		/* IT can be assigned to any context by register_iso_tasklet */
-		d->ctx = ohci->it_legacy_tasklet.context;
-		d->ctrlSet = OHCI1394_IsoXmitContextControlSet + 16 * d->ctx;
-		d->ctrlClear = OHCI1394_IsoXmitContextControlClear + 16 * d->ctx;
-		d->cmdPtr = OHCI1394_IsoXmitCommandPtr + 16 * d->ctx;
-	} else {
-		d->ctrlSet = context_base + OHCI1394_ContextControlSet;
-		d->ctrlClear = context_base + OHCI1394_ContextControlClear;
-		d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
-		tasklet_init (&d->task, dma_trm_tasklet, (unsigned long)d);
-	}
-
+	d->ctrlSet = context_base + OHCI1394_ContextControlSet;
+	d->ctrlClear = context_base + OHCI1394_ContextControlClear;
+	d->cmdPtr = context_base + OHCI1394_ContextCommandPtr;
+	tasklet_init(&d->task, dma_trm_tasklet, (unsigned long)d);
 	return 0;
 }
 
@@ -3294,7 +3079,6 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
 	ohci->csr_config_rom_cpu =
 		pci_alloc_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN,
 				     &ohci->csr_config_rom_bus);
-	OHCI_DMA_ALLOC("consistent csr_config_rom");
 	if (ohci->csr_config_rom_cpu == NULL)
 		FAIL(-ENOMEM, "Failed to allocate buffer config rom");
 	ohci->init_state = OHCI_INIT_HAVE_CONFIG_ROM_BUFFER;
@@ -3303,8 +3087,6 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
 	ohci->selfid_buf_cpu =
 		pci_alloc_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE,
                       &ohci->selfid_buf_bus);
-	OHCI_DMA_ALLOC("consistent selfid_buf");
-
 	if (ohci->selfid_buf_cpu == NULL)
 		FAIL(-ENOMEM, "Failed to allocate DMA buffer for self-id packets");
 	ohci->init_state = OHCI_INIT_HAVE_SELFID_BUFFER;
@@ -3377,20 +3159,6 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
 	ohci->ISO_channel_usage = 0;
         spin_lock_init(&ohci->IR_channel_lock);
 
-	/* Allocate the IR DMA context right here so we don't have
-	 * to do it in interrupt path - note that this doesn't
-	 * waste much memory and avoids the jugglery required to
-	 * allocate it in IRQ path. */
-	if (alloc_dma_rcv_ctx(ohci, &ohci->ir_legacy_context,
-			      DMA_CTX_ISO, 0, IR_NUM_DESC,
-			      IR_BUF_SIZE, IR_SPLIT_BUF_SIZE,
-			      OHCI1394_IsoRcvContextBase) < 0) {
-		FAIL(-ENOMEM, "Cannot allocate IR Legacy DMA context");
-	}
-
-	/* We hopefully don't have to pre-allocate IT DMA like we did
-	 * for IR DMA above. Allocate it on-demand and mark inactive. */
-	ohci->it_legacy_context.ohci = NULL;
 	spin_lock_init(&ohci->event_lock);
 
 	/*
@@ -3483,20 +3251,16 @@ static void ohci1394_pci_remove(struct pci_dev *pdev)
 		free_dma_rcv_ctx(&ohci->ar_resp_context);
 		free_dma_trm_ctx(&ohci->at_req_context);
 		free_dma_trm_ctx(&ohci->at_resp_context);
-		free_dma_rcv_ctx(&ohci->ir_legacy_context);
-		free_dma_trm_ctx(&ohci->it_legacy_context);
 
 	case OHCI_INIT_HAVE_SELFID_BUFFER:
 		pci_free_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE,
 				    ohci->selfid_buf_cpu,
 				    ohci->selfid_buf_bus);
-		OHCI_DMA_FREE("consistent selfid_buf");
 
 	case OHCI_INIT_HAVE_CONFIG_ROM_BUFFER:
 		pci_free_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN,
 				    ohci->csr_config_rom_cpu,
 				    ohci->csr_config_rom_bus);
-		OHCI_DMA_FREE("consistent csr_config_rom");
 
 	case OHCI_INIT_HAVE_IOMAPPING:
 		iounmap(ohci->registers);
diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h
index f1ad539e7c1b..4320bf010495 100644
--- a/drivers/ieee1394/ohci1394.h
+++ b/drivers/ieee1394/ohci1394.h
@@ -190,23 +190,10 @@ struct ti_ohci {
 	unsigned long ir_multichannel_used; /* ditto */
         spinlock_t IR_channel_lock;
 
-	/* iso receive (legacy API) */
-	u64 ir_legacy_channels; /* note: this differs from ISO_channel_usage;
-				   it only accounts for channels listened to
-				   by the legacy API, so that we can know when
-				   it is safe to free the legacy API context */
-
-	struct dma_rcv_ctx ir_legacy_context;
-	struct ohci1394_iso_tasklet ir_legacy_tasklet;
-
         /* iso transmit */
 	int nb_iso_xmit_ctx;
 	unsigned long it_ctx_usage; /* use test_and_set_bit() for atomicity */
 
-	/* iso transmit (legacy API) */
-	struct dma_trm_ctx it_legacy_context;
-	struct ohci1394_iso_tasklet it_legacy_tasklet;
-
         u64 ISO_channel_usage;
 
         /* IEEE-1394 part follows */
@@ -221,7 +208,6 @@ struct ti_ohci {
 
 	/* Tasklets for iso receive and transmit, used by video1394
 	 * and dv1394 */
-
 	struct list_head iso_tasklet_list;
 	spinlock_t iso_tasklet_list_lock;
 
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 0742befe9227..d1a5bcdb5e0b 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -477,7 +477,11 @@ static void send_next(struct ti_lynx *lynx, int what)
         struct lynx_send_data *d;
         struct hpsb_packet *packet;
 
+#if 0 /* has been removed from ieee1394 core */
         d = (what == hpsb_iso ? &lynx->iso_send : &lynx->async);
+#else
+	d = &lynx->async;
+#endif
         if (!list_empty(&d->pcl_queue)) {
                 PRINT(KERN_ERR, lynx->id, "trying to queue a new packet in nonempty fifo");
                 BUG();
@@ -511,9 +515,11 @@ static void send_next(struct ti_lynx *lynx, int what)
         case hpsb_async:
                 pcl.buffer[0].control |= PCL_CMD_XMT;
                 break;
+#if 0 /* has been removed from ieee1394 core */
         case hpsb_iso:
                 pcl.buffer[0].control |= PCL_CMD_XMT | PCL_ISOMODE;
                 break;
+#endif
         case hpsb_raw:
                 pcl.buffer[0].control |= PCL_CMD_UNFXMT;
                 break;
@@ -542,9 +548,11 @@ static int lynx_transmit(struct hpsb_host *host, struct hpsb_packet *packet)
         case hpsb_raw:
                 d = &lynx->async;
                 break;
+#if 0 /* has been removed from ieee1394 core */
         case hpsb_iso:
                 d = &lynx->iso_send;
                 break;
+#endif
         default:
                 PRINT(KERN_ERR, lynx->id, "invalid packet type %d",
                       packet->type);
@@ -797,7 +805,7 @@ static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
 		}
 
                 break;
-
+#if 0 /* has been removed from ieee1394 core */
         case ISO_LISTEN_CHANNEL:
                 spin_lock_irqsave(&lynx->iso_rcv.lock, flags);
 
@@ -819,7 +827,7 @@ static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg)
 
                 spin_unlock_irqrestore(&lynx->iso_rcv.lock, flags);
                 break;
-
+#endif
         default:
                 PRINT(KERN_ERR, lynx->id, "unknown devctl command %d", cmd);
                 retval = -1;
@@ -1009,11 +1017,11 @@ static irqreturn_t lynx_irq_handler(int irq, void *dev_id)
                                 pci_unmap_single(lynx->dev, lynx->iso_send.data_dma,
                                                  packet->data_size, PCI_DMA_TODEVICE);
                         }
-
+#if 0 /* has been removed from ieee1394 core */
                         if (!list_empty(&lynx->iso_send.queue)) {
                                 send_next(lynx, hpsb_iso);
                         }
-
+#endif
                         spin_unlock(&lynx->iso_send.queue_lock);
 
                         if (pcl.pcl_status & DMA_CHAN_STAT_PKTCMPL) {
diff --git a/drivers/ieee1394/raw1394-private.h b/drivers/ieee1394/raw1394-private.h
index 50daabf6e5fa..a06aaad5b448 100644
--- a/drivers/ieee1394/raw1394-private.h
+++ b/drivers/ieee1394/raw1394-private.h
@@ -36,11 +36,6 @@ struct file_info {
 
         u8 __user *fcp_buffer;
 
-	/* old ISO API */
-        u64 listen_channels;
-        quadlet_t __user *iso_buffer;
-        size_t iso_buffer_length;
-
         u8 notification; /* (busreset-notification) RAW1394_NOTIFY_OFF/ON */
 
 	/* new rawiso API */
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index f1d05eeb9f51..336e5ff4cfcf 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -98,21 +98,6 @@ static struct hpsb_address_ops arm_ops = {
 
 static void queue_complete_cb(struct pending_request *req);
 
-#include <asm/current.h>
-static void print_old_iso_deprecation(void)
-{
-	static pid_t p;
-
-	if (p == current->pid)
-		return;
-	p = current->pid;
-	printk(KERN_WARNING "raw1394: WARNING - Program \"%s\" uses unsupported"
-	       " isochronous request types which will be removed in a next"
-	       " kernel release\n", current->comm);
-	printk(KERN_WARNING "raw1394: Update your software to use libraw1394's"
-	       " newer interface\n");
-}
-
 static struct pending_request *__alloc_pending_request(gfp_t flags)
 {
 	struct pending_request *req;
@@ -297,67 +282,6 @@ static void host_reset(struct hpsb_host *host)
 	spin_unlock_irqrestore(&host_info_lock, flags);
 }
 
-static void iso_receive(struct hpsb_host *host, int channel, quadlet_t * data,
-			size_t length)
-{
-	unsigned long flags;
-	struct host_info *hi;
-	struct file_info *fi;
-	struct pending_request *req, *req_next;
-	struct iso_block_store *ibs = NULL;
-	LIST_HEAD(reqs);
-
-	if ((atomic_read(&iso_buffer_size) + length) > iso_buffer_max) {
-		HPSB_INFO("dropped iso packet");
-		return;
-	}
-
-	spin_lock_irqsave(&host_info_lock, flags);
-	hi = find_host_info(host);
-
-	if (hi != NULL) {
-		list_for_each_entry(fi, &hi->file_info_list, list) {
-			if (!(fi->listen_channels & (1ULL << channel)))
-				continue;
-
-			req = __alloc_pending_request(GFP_ATOMIC);
-			if (!req)
-				break;
-
-			if (!ibs) {
-				ibs = kmalloc(sizeof(*ibs) + length,
-					      GFP_ATOMIC);
-				if (!ibs) {
-					kfree(req);
-					break;
-				}
-
-				atomic_add(length, &iso_buffer_size);
-				atomic_set(&ibs->refcount, 0);
-				ibs->data_size = length;
-				memcpy(ibs->data, data, length);
-			}
-
-			atomic_inc(&ibs->refcount);
-
-			req->file_info = fi;
-			req->ibs = ibs;
-			req->data = ibs->data;
-			req->req.type = RAW1394_REQ_ISO_RECEIVE;
-			req->req.generation = get_hpsb_generation(host);
-			req->req.misc = 0;
-			req->req.recvb = ptr2int(fi->iso_buffer);
-			req->req.length = min(length, fi->iso_buffer_length);
-
-			list_add_tail(&req->list, &reqs);
-		}
-	}
-	spin_unlock_irqrestore(&host_info_lock, flags);
-
-	list_for_each_entry_safe(req, req_next, &reqs, list)
-	    queue_complete_req(req);
-}
-
 static void fcp_request(struct hpsb_host *host, int nodeid, int direction,
 			int cts, u8 * data, size_t length)
 {
@@ -434,7 +358,11 @@ struct compat_raw1394_req {
 
 	__u64 sendb;
 	__u64 recvb;
-} __attribute__((packed));
+}
+#if defined(CONFIG_X86_64) || defined(CONFIG_IA64)
+__attribute__((packed))
+#endif
+;
 
 static const char __user *raw1394_compat_write(const char __user *buf)
 {
@@ -459,7 +387,7 @@ static const char __user *raw1394_compat_write(const char __user *buf)
 static int
 raw1394_compat_read(const char __user *buf, struct raw1394_request *r)
 {
-	struct compat_raw1394_req __user *cr = (typeof(cr)) r;
+	struct compat_raw1394_req __user *cr = (typeof(cr)) buf;
 	if (!access_ok(VERIFY_WRITE, cr, sizeof(struct compat_raw1394_req)) ||
 	    P(type) ||
 	    P(error) ||
@@ -587,7 +515,7 @@ static int state_opened(struct file_info *fi, struct pending_request *req)
 
 	req->req.length = 0;
 	queue_complete_req(req);
-	return sizeof(struct raw1394_request);
+	return 0;
 }
 
 static int state_initialized(struct file_info *fi, struct pending_request *req)
@@ -601,7 +529,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req)
 		req->req.generation = atomic_read(&internal_generation);
 		req->req.length = 0;
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 
 	switch (req->req.type) {
@@ -673,44 +601,7 @@ out_set_card:
 	}
 
 	queue_complete_req(req);
-	return sizeof(struct raw1394_request);
-}
-
-static void handle_iso_listen(struct file_info *fi, struct pending_request *req)
-{
-	int channel = req->req.misc;
-
-	if ((channel > 63) || (channel < -64)) {
-		req->req.error = RAW1394_ERROR_INVALID_ARG;
-	} else if (channel >= 0) {
-		/* allocate channel req.misc */
-		if (fi->listen_channels & (1ULL << channel)) {
-			req->req.error = RAW1394_ERROR_ALREADY;
-		} else {
-			if (hpsb_listen_channel
-			    (&raw1394_highlevel, fi->host, channel)) {
-				req->req.error = RAW1394_ERROR_ALREADY;
-			} else {
-				fi->listen_channels |= 1ULL << channel;
-				fi->iso_buffer = int2ptr(req->req.recvb);
-				fi->iso_buffer_length = req->req.length;
-			}
-		}
-	} else {
-		/* deallocate channel (one's complement neg) req.misc */
-		channel = ~channel;
-
-		if (fi->listen_channels & (1ULL << channel)) {
-			hpsb_unlisten_channel(&raw1394_highlevel, fi->host,
-					      channel);
-			fi->listen_channels &= ~(1ULL << channel);
-		} else {
-			req->req.error = RAW1394_ERROR_INVALID_ARG;
-		}
-	}
-
-	req->req.length = 0;
-	queue_complete_req(req);
+	return 0;
 }
 
 static void handle_fcp_listen(struct file_info *fi, struct pending_request *req)
@@ -865,7 +756,7 @@ static int handle_async_request(struct file_info *fi,
 	if (req->req.error) {
 		req->req.length = 0;
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 
 	hpsb_set_packet_complete_task(packet,
@@ -883,51 +774,7 @@ static int handle_async_request(struct file_info *fi,
 		hpsb_free_tlabel(packet);
 		queue_complete_req(req);
 	}
-	return sizeof(struct raw1394_request);
-}
-
-static int handle_iso_send(struct file_info *fi, struct pending_request *req,
-			   int channel)
-{
-	unsigned long flags;
-	struct hpsb_packet *packet;
-
-	packet = hpsb_make_isopacket(fi->host, req->req.length, channel & 0x3f,
-				     (req->req.misc >> 16) & 0x3,
-				     req->req.misc & 0xf);
-	if (!packet)
-		return -ENOMEM;
-
-	packet->speed_code = req->req.address & 0x3;
-
-	req->packet = packet;
-
-	if (copy_from_user(packet->data, int2ptr(req->req.sendb),
-			   req->req.length)) {
-		req->req.error = RAW1394_ERROR_MEMFAULT;
-		req->req.length = 0;
-		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
-	}
-
-	req->req.length = 0;
-	hpsb_set_packet_complete_task(packet,
-				      (void (*)(void *))queue_complete_req,
-				      req);
-
-	spin_lock_irqsave(&fi->reqlists_lock, flags);
-	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
-
-	/* Update the generation of the packet just before sending. */
-	packet->generation = req->req.generation;
-
-	if (hpsb_send_packet(packet) < 0) {
-		req->req.error = RAW1394_ERROR_SEND_ERROR;
-		queue_complete_req(req);
-	}
-
-	return sizeof(struct raw1394_request);
+	return 0;
 }
 
 static int handle_async_send(struct file_info *fi, struct pending_request *req)
@@ -943,7 +790,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req)
 		req->req.error = RAW1394_ERROR_INVALID_ARG;
 		req->req.length = 0;
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 
 	data_size = req->req.length - header_length;
@@ -957,7 +804,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req)
 		req->req.error = RAW1394_ERROR_MEMFAULT;
 		req->req.length = 0;
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 
 	if (copy_from_user
@@ -966,7 +813,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req)
 		req->req.error = RAW1394_ERROR_MEMFAULT;
 		req->req.length = 0;
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 
 	packet->type = hpsb_async;
@@ -994,7 +841,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req)
 		queue_complete_req(req);
 	}
 
-	return sizeof(struct raw1394_request);
+	return 0;
 }
 
 static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
@@ -1869,7 +1716,7 @@ static int arm_register(struct file_info *fi, struct pending_request *req)
 		spin_lock_irqsave(&host_info_lock, flags);
 		list_add_tail(&addr->addr_list, &fi->addr_list);
 		spin_unlock_irqrestore(&host_info_lock, flags);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 	retval =
 	    hpsb_register_addrspace(&raw1394_highlevel, fi->host, &arm_ops,
@@ -1887,7 +1734,7 @@ static int arm_register(struct file_info *fi, struct pending_request *req)
 		return (-EALREADY);
 	}
 	free_pending_request(req);	/* immediate success or fail */
-	return sizeof(struct raw1394_request);
+	return 0;
 }
 
 static int arm_unregister(struct file_info *fi, struct pending_request *req)
@@ -1955,7 +1802,7 @@ static int arm_unregister(struct file_info *fi, struct pending_request *req)
 		vfree(addr->addr_space_buffer);
 		kfree(addr);
 		free_pending_request(req);	/* immediate success or fail */
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 	retval =
 	    hpsb_unregister_addrspace(&raw1394_highlevel, fi->host,
@@ -1971,7 +1818,7 @@ static int arm_unregister(struct file_info *fi, struct pending_request *req)
 	vfree(addr->addr_space_buffer);
 	kfree(addr);
 	free_pending_request(req);	/* immediate success or fail */
-	return sizeof(struct raw1394_request);
+	return 0;
 }
 
 /* Copy data from ARM buffer(s) to user buffer. */
@@ -2013,7 +1860,7 @@ static int arm_get_buf(struct file_info *fi, struct pending_request *req)
 				 * queue no response, and therefore nobody
 				 * will free it. */
 				free_pending_request(req);
-				return sizeof(struct raw1394_request);
+				return 0;
 			} else {
 				DBGMSG("arm_get_buf request exceeded mapping");
 				spin_unlock_irqrestore(&host_info_lock, flags);
@@ -2065,7 +1912,7 @@ static int arm_set_buf(struct file_info *fi, struct pending_request *req)
 				 * queue no response, and therefore nobody
 				 * will free it. */
 				free_pending_request(req);
-				return sizeof(struct raw1394_request);
+				return 0;
 			} else {
 				DBGMSG("arm_set_buf request exceeded mapping");
 				spin_unlock_irqrestore(&host_info_lock, flags);
@@ -2086,7 +1933,7 @@ static int reset_notification(struct file_info *fi, struct pending_request *req)
 	    (req->req.misc == RAW1394_NOTIFY_ON)) {
 		fi->notification = (u8) req->req.misc;
 		free_pending_request(req);	/* we have to free the request, because we queue no response, and therefore nobody will free it */
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 	/* error EINVAL (22) invalid argument */
 	return (-EINVAL);
@@ -2119,12 +1966,12 @@ static int write_phypacket(struct file_info *fi, struct pending_request *req)
 		req->req.length = 0;
 		queue_complete_req(req);
 	}
-	return sizeof(struct raw1394_request);
+	return 0;
 }
 
 static int get_config_rom(struct file_info *fi, struct pending_request *req)
 {
-	int ret = sizeof(struct raw1394_request);
+	int ret = 0;
 	quadlet_t *data = kmalloc(req->req.length, GFP_KERNEL);
 	int status;
 
@@ -2154,7 +2001,7 @@ static int get_config_rom(struct file_info *fi, struct pending_request *req)
 
 static int update_config_rom(struct file_info *fi, struct pending_request *req)
 {
-	int ret = sizeof(struct raw1394_request);
+	int ret = 0;
 	quadlet_t *data = kmalloc(req->req.length, GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -2221,7 +2068,7 @@ static int modify_config_rom(struct file_info *fi, struct pending_request *req)
 
 			hpsb_update_config_rom_image(fi->host);
 			free_pending_request(req);
-			return sizeof(struct raw1394_request);
+			return 0;
 		}
 	}
 
@@ -2286,7 +2133,7 @@ static int modify_config_rom(struct file_info *fi, struct pending_request *req)
 		/* we have to free the request, because we queue no response,
 		 * and therefore nobody will free it */
 		free_pending_request(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	} else {
 		for (dentry =
 		     fi->csr1212_dirs[dr]->value.directory.dentries_head;
@@ -2311,11 +2158,7 @@ static int state_connected(struct file_info *fi, struct pending_request *req)
 
 	case RAW1394_REQ_ECHO:
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
-
-	case RAW1394_REQ_ISO_SEND:
-		print_old_iso_deprecation();
-		return handle_iso_send(fi, req, node);
+		return 0;
 
 	case RAW1394_REQ_ARM_REGISTER:
 		return arm_register(fi, req);
@@ -2332,27 +2175,30 @@ static int state_connected(struct file_info *fi, struct pending_request *req)
 	case RAW1394_REQ_RESET_NOTIFY:
 		return reset_notification(fi, req);
 
+	case RAW1394_REQ_ISO_SEND:
 	case RAW1394_REQ_ISO_LISTEN:
-		print_old_iso_deprecation();
-		handle_iso_listen(fi, req);
-		return sizeof(struct raw1394_request);
+		printk(KERN_DEBUG "raw1394: old iso ABI has been removed\n");
+		req->req.error = RAW1394_ERROR_COMPAT;
+		req->req.misc = RAW1394_KERNELAPI_VERSION;
+		queue_complete_req(req);
+		return 0;
 
 	case RAW1394_REQ_FCP_LISTEN:
 		handle_fcp_listen(fi, req);
-		return sizeof(struct raw1394_request);
+		return 0;
 
 	case RAW1394_REQ_RESET_BUS:
 		if (req->req.misc == RAW1394_LONG_RESET) {
 			DBGMSG("busreset called (type: LONG)");
 			hpsb_reset_bus(fi->host, LONG_RESET);
 			free_pending_request(req);	/* we have to free the request, because we queue no response, and therefore nobody will free it */
-			return sizeof(struct raw1394_request);
+			return 0;
 		}
 		if (req->req.misc == RAW1394_SHORT_RESET) {
 			DBGMSG("busreset called (type: SHORT)");
 			hpsb_reset_bus(fi->host, SHORT_RESET);
 			free_pending_request(req);	/* we have to free the request, because we queue no response, and therefore nobody will free it */
-			return sizeof(struct raw1394_request);
+			return 0;
 		}
 		/* error EINVAL (22) invalid argument */
 		return (-EINVAL);
@@ -2371,7 +2217,7 @@ static int state_connected(struct file_info *fi, struct pending_request *req)
 		req->req.generation = get_hpsb_generation(fi->host);
 		req->req.length = 0;
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 
 	switch (req->req.type) {
@@ -2384,7 +2230,7 @@ static int state_connected(struct file_info *fi, struct pending_request *req)
 	if (req->req.length == 0) {
 		req->req.error = RAW1394_ERROR_INVALID_ARG;
 		queue_complete_req(req);
-		return sizeof(struct raw1394_request);
+		return 0;
 	}
 
 	return handle_async_request(fi, req, node);
@@ -2395,7 +2241,7 @@ static ssize_t raw1394_write(struct file *file, const char __user * buffer,
 {
 	struct file_info *fi = (struct file_info *)file->private_data;
 	struct pending_request *req;
-	ssize_t retval = 0;
+	ssize_t retval = -EBADFD;
 
 #ifdef CONFIG_COMPAT
 	if (count == sizeof(struct compat_raw1394_req) &&
@@ -2437,6 +2283,9 @@ static ssize_t raw1394_write(struct file *file, const char __user * buffer,
 
 	if (retval < 0) {
 		free_pending_request(req);
+	} else {
+		BUG_ON(retval);
+		retval = count;
 	}
 
 	return retval;
@@ -2802,6 +2651,103 @@ static int raw1394_ioctl(struct inode *inode, struct file *file,
 	return -EINVAL;
 }
 
+#ifdef CONFIG_COMPAT
+struct raw1394_iso_packets32 {
+        __u32 n_packets;
+        compat_uptr_t infos;
+} __attribute__((packed));
+
+struct raw1394_cycle_timer32 {
+        __u32 cycle_timer;
+        __u64 local_time;
+}
+#if defined(CONFIG_X86_64) || defined(CONFIG_IA64)
+__attribute__((packed))
+#endif
+;
+
+#define RAW1394_IOC_ISO_RECV_PACKETS32          \
+        _IOW ('#', 0x25, struct raw1394_iso_packets32)
+#define RAW1394_IOC_ISO_XMIT_PACKETS32          \
+        _IOW ('#', 0x27, struct raw1394_iso_packets32)
+#define RAW1394_IOC_GET_CYCLE_TIMER32           \
+        _IOR ('#', 0x30, struct raw1394_cycle_timer32)
+
+static long raw1394_iso_xmit_recv_packets32(struct file *file, unsigned int cmd,
+                                          struct raw1394_iso_packets32 __user *arg)
+{
+	compat_uptr_t infos32;
+	void *infos;
+	long err = -EFAULT;
+	struct raw1394_iso_packets __user *dst = compat_alloc_user_space(sizeof(struct raw1394_iso_packets));
+
+	if (!copy_in_user(&dst->n_packets, &arg->n_packets, sizeof arg->n_packets) &&
+	    !copy_from_user(&infos32, &arg->infos, sizeof infos32)) {
+		infos = compat_ptr(infos32);
+		if (!copy_to_user(&dst->infos, &infos, sizeof infos))
+			err = raw1394_ioctl(NULL, file, cmd, (unsigned long)dst);
+	}
+	return err;
+}
+
+static long raw1394_read_cycle_timer32(struct file_info *fi, void __user * uaddr)
+{
+	struct raw1394_cycle_timer32 ct;
+	int err;
+
+	err = hpsb_read_cycle_timer(fi->host, &ct.cycle_timer, &ct.local_time);
+	if (!err)
+		if (copy_to_user(uaddr, &ct, sizeof(ct)))
+			err = -EFAULT;
+	return err;
+}
+
+static long raw1394_compat_ioctl(struct file *file,
+				 unsigned int cmd, unsigned long arg)
+{
+	struct file_info *fi = file->private_data;
+	void __user *argp = (void __user *)arg;
+	long err;
+
+	lock_kernel();
+	switch (cmd) {
+	/* These requests have same format as long as 'int' has same size. */
+	case RAW1394_IOC_ISO_RECV_INIT:
+	case RAW1394_IOC_ISO_RECV_START:
+	case RAW1394_IOC_ISO_RECV_LISTEN_CHANNEL:
+	case RAW1394_IOC_ISO_RECV_UNLISTEN_CHANNEL:
+	case RAW1394_IOC_ISO_RECV_SET_CHANNEL_MASK:
+	case RAW1394_IOC_ISO_RECV_RELEASE_PACKETS:
+	case RAW1394_IOC_ISO_RECV_FLUSH:
+	case RAW1394_IOC_ISO_XMIT_RECV_STOP:
+	case RAW1394_IOC_ISO_XMIT_INIT:
+	case RAW1394_IOC_ISO_XMIT_START:
+	case RAW1394_IOC_ISO_XMIT_SYNC:
+	case RAW1394_IOC_ISO_GET_STATUS:
+	case RAW1394_IOC_ISO_SHUTDOWN:
+	case RAW1394_IOC_ISO_QUEUE_ACTIVITY:
+		err = raw1394_ioctl(NULL, file, cmd, arg);
+		break;
+	/* These request have different format. */
+	case RAW1394_IOC_ISO_RECV_PACKETS32:
+		err = raw1394_iso_xmit_recv_packets32(file, RAW1394_IOC_ISO_RECV_PACKETS, argp);
+		break;
+	case RAW1394_IOC_ISO_XMIT_PACKETS32:
+		err = raw1394_iso_xmit_recv_packets32(file, RAW1394_IOC_ISO_XMIT_PACKETS, argp);
+		break;
+	case RAW1394_IOC_GET_CYCLE_TIMER32:
+		err = raw1394_read_cycle_timer32(fi, argp);
+		break;
+	default:
+		err = -EINVAL;
+		break;
+	}
+	unlock_kernel();
+
+	return err;
+}
+#endif
+
 static unsigned int raw1394_poll(struct file *file, poll_table * pt)
 {
 	struct file_info *fi = file->private_data;
@@ -2861,14 +2807,7 @@ static int raw1394_release(struct inode *inode, struct file *file)
 	if (fi->iso_state != RAW1394_ISO_INACTIVE)
 		raw1394_iso_shutdown(fi);
 
-	for (i = 0; i < 64; i++) {
-		if (fi->listen_channels & (1ULL << i)) {
-			hpsb_unlisten_channel(&raw1394_highlevel, fi->host, i);
-		}
-	}
-
 	spin_lock_irqsave(&host_info_lock, flags);
-	fi->listen_channels = 0;
 
 	fail = 0;
 	/* set address-entries invalid */
@@ -3030,7 +2969,6 @@ static struct hpsb_highlevel raw1394_highlevel = {
 	.add_host = add_host,
 	.remove_host = remove_host,
 	.host_reset = host_reset,
-	.iso_receive = iso_receive,
 	.fcp_request = fcp_request,
 };
 
@@ -3041,7 +2979,9 @@ static const struct file_operations raw1394_fops = {
 	.write = raw1394_write,
 	.mmap = raw1394_mmap,
 	.ioctl = raw1394_ioctl,
-	// .compat_ioctl = ... someone needs to do this
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = raw1394_compat_ioctl,
+#endif
 	.poll = raw1394_poll,
 	.open = raw1394_open,
 	.release = raw1394_release,
@@ -3054,9 +2994,9 @@ static int __init init_raw1394(void)
 	hpsb_register_highlevel(&raw1394_highlevel);
 
 	if (IS_ERR
-	    (class_device_create
-	     (hpsb_protocol_class, NULL,
-	      MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16), NULL,
+	    (device_create(
+	      hpsb_protocol_class, NULL,
+	      MKDEV(IEEE1394_MAJOR, IEEE1394_MINOR_BLOCK_RAW1394 * 16),
 	      RAW1394_DEVICE_NAME))) {
 		ret = -EFAULT;
 		goto out_unreg;
@@ -3083,9 +3023,9 @@ static int __init init_raw1394(void)
 	goto out;
 
       out_dev:
-	class_device_destroy(hpsb_protocol_class,
-			     MKDEV(IEEE1394_MAJOR,
-				   IEEE1394_MINOR_BLOCK_RAW1394 * 16));
+	device_destroy(hpsb_protocol_class,
+		       MKDEV(IEEE1394_MAJOR,
+			     IEEE1394_MINOR_BLOCK_RAW1394 * 16));
       out_unreg:
 	hpsb_unregister_highlevel(&raw1394_highlevel);
       out:
@@ -3094,9 +3034,9 @@ static int __init init_raw1394(void)
 
 static void __exit cleanup_raw1394(void)
 {
-	class_device_destroy(hpsb_protocol_class,
-			     MKDEV(IEEE1394_MAJOR,
-				   IEEE1394_MINOR_BLOCK_RAW1394 * 16));
+	device_destroy(hpsb_protocol_class,
+		       MKDEV(IEEE1394_MAJOR,
+			     IEEE1394_MINOR_BLOCK_RAW1394 * 16));
 	cdev_del(&raw1394_cdev);
 	hpsb_unregister_highlevel(&raw1394_highlevel);
 	hpsb_unregister_protocol(&raw1394_driver);
diff --git a/drivers/ieee1394/raw1394.h b/drivers/ieee1394/raw1394.h
index 7bd22ee1afbb..963ac20373d2 100644
--- a/drivers/ieee1394/raw1394.h
+++ b/drivers/ieee1394/raw1394.h
@@ -17,11 +17,11 @@
 #define RAW1394_REQ_ASYNC_WRITE     101
 #define RAW1394_REQ_LOCK            102
 #define RAW1394_REQ_LOCK64          103
-#define RAW1394_REQ_ISO_SEND        104
+#define RAW1394_REQ_ISO_SEND        104 /* removed ABI, now a no-op */
 #define RAW1394_REQ_ASYNC_SEND      105
 #define RAW1394_REQ_ASYNC_STREAM    106
 
-#define RAW1394_REQ_ISO_LISTEN      200
+#define RAW1394_REQ_ISO_LISTEN      200 /* removed ABI, now a no-op */
 #define RAW1394_REQ_FCP_LISTEN      201
 #define RAW1394_REQ_RESET_BUS       202
 #define RAW1394_REQ_GET_ROM         203
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 3f873cc7e247..e0c385a3b450 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -118,14 +118,13 @@ MODULE_PARM_DESC(max_speed, "Force max speed "
 		 "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
 
 /*
- * Set serialize_io to 1 if you'd like only one scsi command sent
- * down to us at a time (debugging). This might be necessary for very
- * badly behaved sbp2 devices.
+ * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs.
+ * This is and always has been buggy in multiple subtle ways. See above TODOs.
  */
 static int sbp2_serialize_io = 1;
-module_param_named(serialize_io, sbp2_serialize_io, int, 0444);
-MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers "
-		 "(default = 1, faster = 0)");
+module_param_named(serialize_io, sbp2_serialize_io, bool, 0444);
+MODULE_PARM_DESC(serialize_io, "Serialize requests coming from SCSI drivers "
+		 "(default = Y, faster but buggy = N)");
 
 /*
  * Bump up max_sectors if you'd like to support very large sized
@@ -154,9 +153,9 @@ MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported "
  * are possible on OXFW911 and newer Oxsemi bridges.
  */
 static int sbp2_exclusive_login = 1;
-module_param_named(exclusive_login, sbp2_exclusive_login, int, 0644);
+module_param_named(exclusive_login, sbp2_exclusive_login, bool, 0644);
 MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
-		 "(default = 1)");
+		 "(default = Y, use N for concurrent initiators)");
 
 /*
  * If any of the following workarounds is required for your device to work,
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index 44402b9d82a8..333a4bb76743 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -67,7 +67,7 @@ struct sbp2_command_orb {
 #define ORB_SET_LUN(v)			((v) & 0xffff)
 #define ORB_SET_FUNCTION(v)		(((v) & 0xf) << 16)
 #define ORB_SET_RECONNECT(v)		(((v) & 0xf) << 20)
-#define ORB_SET_EXCLUSIVE(v)		(((v) & 0x1) << 28)
+#define ORB_SET_EXCLUSIVE(v)		((v) ? 1 << 28 : 0)
 #define ORB_SET_LOGIN_RESP_LENGTH(v)	((v) & 0xffff)
 #define ORB_SET_PASSWD_LENGTH(v)	(((v) & 0xffff) << 16)
 
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 87ebd0846c34..bd28adfd7afc 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -1340,9 +1340,9 @@ static void video1394_add_host (struct hpsb_host *host)
 	hpsb_set_hostinfo_key(&video1394_highlevel, host, ohci->host->id);
 
 	minor = IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id;
-	class_device_create(hpsb_protocol_class, NULL, MKDEV(
-		IEEE1394_MAJOR,	minor), 
-		NULL, "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
+	device_create(hpsb_protocol_class, NULL,
+		      MKDEV(IEEE1394_MAJOR, minor),
+		      "%s-%d", VIDEO1394_DRIVER_NAME, ohci->host->id);
 }
 
 
@@ -1351,8 +1351,8 @@ static void video1394_remove_host (struct hpsb_host *host)
 	struct ti_ohci *ohci = hpsb_get_hostinfo(&video1394_highlevel, host);
 
 	if (ohci)
-		class_device_destroy(hpsb_protocol_class, MKDEV(IEEE1394_MAJOR,
-			IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id));
+		device_destroy(hpsb_protocol_class, MKDEV(IEEE1394_MAJOR,
+			       IEEE1394_MINOR_BLOCK_VIDEO1394 * 16 + ohci->host->id));
 	return;
 }
 
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 08c299ebf4a8..bf9b99292048 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -479,7 +479,6 @@ alloc_group_attrs(ssize_t (*show)(struct ib_port *,
 
 		element->attr.attr.name  = element->name;
 		element->attr.attr.mode  = S_IRUGO;
-		element->attr.attr.owner = THIS_MODULE;
 		element->attr.show       = show;
 		element->index		 = i;
 
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index e3a223209710..834e86f6c04e 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -270,7 +270,6 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	struct ipath_devdata *dd;
 	unsigned long long addr;
 	u32 bar0 = 0, bar1 = 0;
-	u8 rev;
 
 	dd = ipath_alloc_devdata(pdev);
 	if (IS_ERR(dd)) {
@@ -432,13 +431,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	dd->ipath_deviceid = ent->device;	/* save for later use */
 	dd->ipath_vendorid = ent->vendor;
 
-	ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-	if (ret) {
-		ipath_dev_err(dd, "Failed to read PCI revision ID unit "
-			      "%u: err %d\n", dd->ipath_unit, -ret);
-		goto bail_regions;	/* shouldn't ever happen */
-	}
-	dd->ipath_pcirev = rev;
+	dd->ipath_pcirev = pdev->revision;
 
 #if defined(__powerpc__)
 	/* There isn't a generic way to specify writethrough mappings */
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index be6b93c20f60..ab4b2d9b5327 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -30,6 +30,7 @@ struct evdev {
 	wait_queue_head_t wait;
 	struct evdev_client *grab;
 	struct list_head client_list;
+	struct device dev;
 };
 
 struct evdev_client {
@@ -94,8 +95,10 @@ static int evdev_flush(struct file *file, fl_owner_t id)
 	return input_flush_device(&evdev->handle, file);
 }
 
-static void evdev_free(struct evdev *evdev)
+static void evdev_free(struct device *dev)
 {
+	struct evdev *evdev = container_of(dev, struct evdev, dev);
+
 	evdev_table[evdev->minor] = NULL;
 	kfree(evdev);
 }
@@ -114,12 +117,10 @@ static int evdev_release(struct inode *inode, struct file *file)
 	list_del(&client->node);
 	kfree(client);
 
-	if (!--evdev->open) {
-		if (evdev->exist)
-			input_close_device(&evdev->handle);
-		else
-			evdev_free(evdev);
-	}
+	if (!--evdev->open && evdev->exist)
+		input_close_device(&evdev->handle);
+
+	put_device(&evdev->dev);
 
 	return 0;
 }
@@ -139,24 +140,32 @@ static int evdev_open(struct inode *inode, struct file *file)
 	if (!evdev || !evdev->exist)
 		return -ENODEV;
 
+	get_device(&evdev->dev);
+
 	client = kzalloc(sizeof(struct evdev_client), GFP_KERNEL);
-	if (!client)
-		return -ENOMEM;
+	if (!client) {
+		error = -ENOMEM;
+		goto err_put_evdev;
+	}
 
 	client->evdev = evdev;
 	list_add_tail(&client->node, &evdev->client_list);
 
 	if (!evdev->open++ && evdev->exist) {
 		error = input_open_device(&evdev->handle);
-		if (error) {
-			list_del(&client->node);
-			kfree(client);
-			return error;
-		}
+		if (error)
+			goto err_free_client;
 	}
 
 	file->private_data = client;
 	return 0;
+
+ err_free_client:
+	list_del(&client->node);
+	kfree(client);
+ err_put_evdev:
+	put_device(&evdev->dev);
+	return error;
 }
 
 #ifdef CONFIG_COMPAT
@@ -625,8 +634,6 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 			 const struct input_device_id *id)
 {
 	struct evdev *evdev;
-	struct class_device *cdev;
-	dev_t devt;
 	int minor;
 	int error;
 
@@ -649,38 +656,32 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 	evdev->handle.name = evdev->name;
 	evdev->handle.handler = handler;
 	evdev->handle.private = evdev;
-	sprintf(evdev->name, "event%d", minor);
-
-	evdev_table[minor] = evdev;
+	snprintf(evdev->name, sizeof(evdev->name), "event%d", minor);
 
-	devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor),
+	snprintf(evdev->dev.bus_id, sizeof(evdev->dev.bus_id),
+		 "event%d", minor);
+	evdev->dev.class = &input_class;
+	evdev->dev.parent = &dev->dev;
+	evdev->dev.devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor);
+	evdev->dev.release = evdev_free;
+	device_initialize(&evdev->dev);
 
-	cdev = class_device_create(&input_class, &dev->cdev, devt,
-				   dev->cdev.dev, evdev->name);
-	if (IS_ERR(cdev)) {
-		error = PTR_ERR(cdev);
-		goto err_free_evdev;
-	}
+	evdev_table[minor] = evdev;
 
-	/* temporary symlink to keep userspace happy */
-	error = sysfs_create_link(&input_class.subsys.kobj,
-				  &cdev->kobj, evdev->name);
+	error = device_add(&evdev->dev);
 	if (error)
-		goto err_cdev_destroy;
+		goto err_free_evdev;
 
 	error = input_register_handle(&evdev->handle);
 	if (error)
-		goto err_remove_link;
+		goto err_delete_evdev;
 
 	return 0;
 
- err_remove_link:
-	sysfs_remove_link(&input_class.subsys.kobj, evdev->name);
- err_cdev_destroy:
-	class_device_destroy(&input_class, devt);
+ err_delete_evdev:
+	device_del(&evdev->dev);
  err_free_evdev:
-	kfree(evdev);
-	evdev_table[minor] = NULL;
+	put_device(&evdev->dev);
 	return error;
 }
 
@@ -690,10 +691,8 @@ static void evdev_disconnect(struct input_handle *handle)
 	struct evdev_client *client;
 
 	input_unregister_handle(handle);
+	device_del(&evdev->dev);
 
-	sysfs_remove_link(&input_class.subsys.kobj, evdev->name);
-	class_device_destroy(&input_class,
-			MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor));
 	evdev->exist = 0;
 
 	if (evdev->open) {
@@ -702,8 +701,9 @@ static void evdev_disconnect(struct input_handle *handle)
 		list_for_each_entry(client, &evdev->client_list, node)
 			kill_fasync(&client->fasync, SIGIO, POLL_HUP);
 		wake_up_interruptible(&evdev->wait);
-	} else
-		evdev_free(evdev);
+	}
+
+	put_device(&evdev->dev);
 }
 
 static const struct input_device_id evdev_ids[] = {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ccd8abafcb70..75b4d2a83dd9 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -442,7 +442,7 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han
 		printk(KERN_ERR
 			"input: failed to attach handler %s to device %s, "
 			"error: %d\n",
-			handler->name, kobject_name(&dev->cdev.kobj), error);
+			handler->name, kobject_name(&dev->dev.kobj), error);
 
 	return error;
 }
@@ -527,7 +527,7 @@ static void input_seq_print_bitmap(struct seq_file *seq, const char *name,
 static int input_devices_seq_show(struct seq_file *seq, void *v)
 {
 	struct input_dev *dev = container_of(v, struct input_dev, node);
-	const char *path = kobject_get_path(&dev->cdev.kobj, GFP_KERNEL);
+	const char *path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
 	struct input_handle *handle;
 
 	seq_printf(seq, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
@@ -682,15 +682,17 @@ static inline int input_proc_init(void) { return 0; }
 static inline void input_proc_exit(void) { }
 #endif
 
-#define INPUT_DEV_STRING_ATTR_SHOW(name)					\
-static ssize_t input_dev_show_##name(struct class_device *dev, char *buf)	\
-{										\
-	struct input_dev *input_dev = to_input_dev(dev);			\
-										\
-	return scnprintf(buf, PAGE_SIZE, "%s\n",				\
-			 input_dev->name ? input_dev->name : "");		\
-}										\
-static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL);
+#define INPUT_DEV_STRING_ATTR_SHOW(name)				\
+static ssize_t input_dev_show_##name(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     char *buf)				\
+{									\
+	struct input_dev *input_dev = to_input_dev(dev);		\
+									\
+	return scnprintf(buf, PAGE_SIZE, "%s\n",			\
+			 input_dev->name ? input_dev->name : "");	\
+}									\
+static DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL)
 
 INPUT_DEV_STRING_ATTR_SHOW(name);
 INPUT_DEV_STRING_ATTR_SHOW(phys);
@@ -744,7 +746,9 @@ static int input_print_modalias(char *buf, int size, struct input_dev *id,
 	return len;
 }
 
-static ssize_t input_dev_show_modalias(struct class_device *dev, char *buf)
+static ssize_t input_dev_show_modalias(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
 {
 	struct input_dev *id = to_input_dev(dev);
 	ssize_t len;
@@ -753,13 +757,13 @@ static ssize_t input_dev_show_modalias(struct class_device *dev, char *buf)
 
 	return min_t(int, len, PAGE_SIZE);
 }
-static CLASS_DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL);
+static DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL);
 
 static struct attribute *input_dev_attrs[] = {
-	&class_device_attr_name.attr,
-	&class_device_attr_phys.attr,
-	&class_device_attr_uniq.attr,
-	&class_device_attr_modalias.attr,
+	&dev_attr_name.attr,
+	&dev_attr_phys.attr,
+	&dev_attr_uniq.attr,
+	&dev_attr_modalias.attr,
 	NULL
 };
 
@@ -767,13 +771,15 @@ static struct attribute_group input_dev_attr_group = {
 	.attrs	= input_dev_attrs,
 };
 
-#define INPUT_DEV_ID_ATTR(name)							\
-static ssize_t input_dev_show_id_##name(struct class_device *dev, char *buf)	\
-{										\
-	struct input_dev *input_dev = to_input_dev(dev);			\
-	return scnprintf(buf, PAGE_SIZE, "%04x\n", input_dev->id.name);		\
-}										\
-static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL);
+#define INPUT_DEV_ID_ATTR(name)						\
+static ssize_t input_dev_show_id_##name(struct device *dev,		\
+					struct device_attribute *attr,	\
+					char *buf)			\
+{									\
+	struct input_dev *input_dev = to_input_dev(dev);		\
+	return scnprintf(buf, PAGE_SIZE, "%04x\n", input_dev->id.name);	\
+}									\
+static DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL)
 
 INPUT_DEV_ID_ATTR(bustype);
 INPUT_DEV_ID_ATTR(vendor);
@@ -781,10 +787,10 @@ INPUT_DEV_ID_ATTR(product);
 INPUT_DEV_ID_ATTR(version);
 
 static struct attribute *input_dev_id_attrs[] = {
-	&class_device_attr_bustype.attr,
-	&class_device_attr_vendor.attr,
-	&class_device_attr_product.attr,
-	&class_device_attr_version.attr,
+	&dev_attr_bustype.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_product.attr,
+	&dev_attr_version.attr,
 	NULL
 };
 
@@ -813,15 +819,17 @@ static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap,
 	return len;
 }
 
-#define INPUT_DEV_CAP_ATTR(ev, bm)						\
-static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf)	\
-{										\
-	struct input_dev *input_dev = to_input_dev(dev);			\
-	int len = input_print_bitmap(buf, PAGE_SIZE,				\
-				     input_dev->bm##bit, ev##_MAX, 1);		\
-	return min_t(int, len, PAGE_SIZE);					\
-}										\
-static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL);
+#define INPUT_DEV_CAP_ATTR(ev, bm)					\
+static ssize_t input_dev_show_cap_##bm(struct device *dev,		\
+				       struct device_attribute *attr,	\
+				       char *buf)			\
+{									\
+	struct input_dev *input_dev = to_input_dev(dev);		\
+	int len = input_print_bitmap(buf, PAGE_SIZE,			\
+				     input_dev->bm##bit, ev##_MAX, 1);	\
+	return min_t(int, len, PAGE_SIZE);				\
+}									\
+static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL)
 
 INPUT_DEV_CAP_ATTR(EV, ev);
 INPUT_DEV_CAP_ATTR(KEY, key);
@@ -834,15 +842,15 @@ INPUT_DEV_CAP_ATTR(FF, ff);
 INPUT_DEV_CAP_ATTR(SW, sw);
 
 static struct attribute *input_dev_caps_attrs[] = {
-	&class_device_attr_ev.attr,
-	&class_device_attr_key.attr,
-	&class_device_attr_rel.attr,
-	&class_device_attr_abs.attr,
-	&class_device_attr_msc.attr,
-	&class_device_attr_led.attr,
-	&class_device_attr_snd.attr,
-	&class_device_attr_ff.attr,
-	&class_device_attr_sw.attr,
+	&dev_attr_ev.attr,
+	&dev_attr_key.attr,
+	&dev_attr_rel.attr,
+	&dev_attr_abs.attr,
+	&dev_attr_msc.attr,
+	&dev_attr_led.attr,
+	&dev_attr_snd.attr,
+	&dev_attr_ff.attr,
+	&dev_attr_sw.attr,
 	NULL
 };
 
@@ -858,9 +866,9 @@ static struct attribute_group *input_dev_attr_groups[] = {
 	NULL
 };
 
-static void input_dev_release(struct class_device *class_dev)
+static void input_dev_release(struct device *device)
 {
-	struct input_dev *dev = to_input_dev(class_dev);
+	struct input_dev *dev = to_input_dev(device);
 
 	input_ff_destroy(dev);
 	kfree(dev);
@@ -947,10 +955,10 @@ static int input_add_uevent_modalias_var(char **envp, int num_envp, int *cur_ind
 			return err;					\
 	} while (0)
 
-static int input_dev_uevent(struct class_device *cdev, char **envp,
+static int input_dev_uevent(struct device *device, char **envp,
 			    int num_envp, char *buffer, int buffer_size)
 {
-	struct input_dev *dev = to_input_dev(cdev);
+	struct input_dev *dev = to_input_dev(device);
 	int i = 0;
 	int len = 0;
 
@@ -988,10 +996,14 @@ static int input_dev_uevent(struct class_device *cdev, char **envp,
 	return 0;
 }
 
+static struct device_type input_dev_type = {
+	.groups		= input_dev_attr_groups,
+	.release	= input_dev_release,
+	.uevent		= input_dev_uevent,
+};
+
 struct class input_class = {
-	.name			= "input",
-	.release		= input_dev_release,
-	.uevent			= input_dev_uevent,
+	.name		= "input",
 };
 EXPORT_SYMBOL_GPL(input_class);
 
@@ -1010,9 +1022,9 @@ struct input_dev *input_allocate_device(void)
 
 	dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
 	if (dev) {
-		dev->cdev.class = &input_class;
-		dev->cdev.groups = input_dev_attr_groups;
-		class_device_initialize(&dev->cdev);
+		dev->dev.type = &input_dev_type;
+		dev->dev.class = &input_class;
+		device_initialize(&dev->dev);
 		mutex_init(&dev->mutex);
 		INIT_LIST_HEAD(&dev->h_list);
 		INIT_LIST_HEAD(&dev->node);
@@ -1131,17 +1143,17 @@ int input_register_device(struct input_dev *dev)
 
 	list_add_tail(&dev->node, &input_dev_list);
 
-	snprintf(dev->cdev.class_id, sizeof(dev->cdev.class_id),
+	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
 		 "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1);
 
-	if (!dev->cdev.dev)
-		dev->cdev.dev = dev->dev.parent;
+	if (dev->cdev.dev)
+		dev->dev.parent = dev->cdev.dev;
 
-	error = class_device_add(&dev->cdev);
+	error = device_add(&dev->dev);
 	if (error)
 		return error;
 
-	path = kobject_get_path(&dev->cdev.kobj, GFP_KERNEL);
+	path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
 	printk(KERN_INFO "input: %s as %s\n",
 		dev->name ? dev->name : "Unspecified device", path ? path : "N/A");
 	kfree(path);
@@ -1173,7 +1185,7 @@ void input_unregister_device(struct input_dev *dev)
 
 	list_del_init(&dev->node);
 
-	class_device_unregister(&dev->cdev);
+	device_unregister(&dev->dev);
 
 	input_wakeup_procfs_readers();
 }
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 10e3b7bc925f..a9a0180bfd46 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -43,6 +43,8 @@ struct joydev {
 	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct list_head client_list;
+	struct device dev;
+
 	struct js_corr corr[ABS_MAX + 1];
 	struct JS_DATA_SAVE_TYPE glue;
 	int nabs;
@@ -138,8 +140,10 @@ static int joydev_fasync(int fd, struct file *file, int on)
 	return retval < 0 ? retval : 0;
 }
 
-static void joydev_free(struct joydev *joydev)
+static void joydev_free(struct device *dev)
 {
+	struct joydev *joydev = container_of(dev, struct joydev, dev);
+
 	joydev_table[joydev->minor] = NULL;
 	kfree(joydev);
 }
@@ -154,12 +158,10 @@ static int joydev_release(struct inode *inode, struct file *file)
 	list_del(&client->node);
 	kfree(client);
 
-	if (!--joydev->open) {
-		if (joydev->exist)
-			input_close_device(&joydev->handle);
-		else
-			joydev_free(joydev);
-	}
+	if (!--joydev->open && joydev->exist)
+		input_close_device(&joydev->handle);
+
+	put_device(&joydev->dev);
 
 	return 0;
 }
@@ -178,24 +180,32 @@ static int joydev_open(struct inode *inode, struct file *file)
 	if (!joydev || !joydev->exist)
 		return -ENODEV;
 
+	get_device(&joydev->dev);
+
 	client = kzalloc(sizeof(struct joydev_client), GFP_KERNEL);
-	if (!client)
-		return -ENOMEM;
+	if (!client) {
+		error = -ENOMEM;
+		goto err_put_joydev;
+	}
 
 	client->joydev = joydev;
 	list_add_tail(&client->node, &joydev->client_list);
 
 	if (!joydev->open++ && joydev->exist) {
 		error = input_open_device(&joydev->handle);
-		if (error) {
-			list_del(&client->node);
-			kfree(client);
-			return error;
-		}
+		if (error)
+			goto err_free_client;
 	}
 
 	file->private_data = client;
 	return 0;
+
+ err_free_client:
+	list_del(&client->node);
+	kfree(client);
+ err_put_joydev:
+	put_device(&joydev->dev);
+	return error;
 }
 
 static ssize_t joydev_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
@@ -481,8 +491,6 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 			  const struct input_device_id *id)
 {
 	struct joydev *joydev;
-	struct class_device *cdev;
-	dev_t devt;
 	int i, j, t, minor;
 	int error;
 
@@ -505,7 +513,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 	joydev->handle.name = joydev->name;
 	joydev->handle.handler = handler;
 	joydev->handle.private = joydev;
-	sprintf(joydev->name, "js%d", minor);
+	snprintf(joydev->name, sizeof(joydev->name), "js%d", minor);
 
 	for (i = 0; i < ABS_MAX + 1; i++)
 		if (test_bit(i, dev->absbit)) {
@@ -547,36 +555,30 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 		joydev->abs[i] = joydev_correct(dev->abs[j], joydev->corr + i);
 	}
 
-	joydev_table[minor] = joydev;
-
-	devt = MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor),
+	snprintf(joydev->dev.bus_id, sizeof(joydev->dev.bus_id),
+		 "js%d", minor);
+	joydev->dev.class = &input_class;
+	joydev->dev.parent = &dev->dev;
+	joydev->dev.devt = MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor);
+	joydev->dev.release = joydev_free;
+	device_initialize(&joydev->dev);
 
-	cdev = class_device_create(&input_class, &dev->cdev, devt,
-				   dev->cdev.dev, joydev->name);
-	if (IS_ERR(cdev)) {
-		error = PTR_ERR(cdev);
-		goto err_free_joydev;
-	}
+	joydev_table[minor] = joydev;
 
-	/* temporary symlink to keep userspace happy */
-	error = sysfs_create_link(&input_class.subsys.kobj,
-				  &cdev->kobj, joydev->name);
+	error = device_add(&joydev->dev);
 	if (error)
-		goto err_cdev_destroy;
+		goto err_free_joydev;
 
 	error = input_register_handle(&joydev->handle);
 	if (error)
-		goto err_remove_link;
+		goto err_delete_joydev;
 
 	return 0;
 
- err_remove_link:
-	sysfs_remove_link(&input_class.subsys.kobj, joydev->name);
- err_cdev_destroy:
-	class_device_destroy(&input_class, devt);
+ err_delete_joydev:
+	device_del(&joydev->dev);
  err_free_joydev:
-	joydev_table[minor] = NULL;
-	kfree(joydev);
+	put_device(&joydev->dev);
 	return error;
 }
 
@@ -587,9 +589,8 @@ static void joydev_disconnect(struct input_handle *handle)
 	struct joydev_client *client;
 
 	input_unregister_handle(handle);
+	device_del(&joydev->dev);
 
-	sysfs_remove_link(&input_class.subsys.kobj, joydev->name);
-	class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor));
 	joydev->exist = 0;
 
 	if (joydev->open) {
@@ -597,8 +598,9 @@ static void joydev_disconnect(struct input_handle *handle)
 		list_for_each_entry(client, &joydev->client_list, node)
 			kill_fasync(&client->fasync, SIGIO, POLL_HUP);
 		wake_up_interruptible(&joydev->wait);
-	} else
-		joydev_free(joydev);
+	}
+
+	put_device(&joydev->dev);
 }
 
 static const struct input_device_id joydev_blacklist[] = {
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index b0023452ec90..12db72d83ea0 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -268,4 +268,11 @@ config JOYSTICK_XPAD
 	  To compile this driver as a module, choose M here: the
 	  module will be called xpad.
 
+config JOYSTICK_XPAD_FF
+	bool "X-Box gamepad rumble support"
+	depends on JOYSTICK_XPAD && INPUT
+	select INPUT_FF_MEMLESS
+	---help---
+	  Say Y here if you want to take advantage of xbox 360 rumble features.
+
 endif
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index 555319e6378c..4ed3a3eadf19 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -320,10 +320,10 @@ static int multiport_io(struct gameport* gameport, int sendflags, int sendcode,
 
 static int dig_mode_start(struct gameport *gameport, u32 *packet)
 {
-	int i, seq_len = sizeof(init_seq)/sizeof(int);
+	int i;
 	int flags, tries = 0, bads = 0;
 
-	for (i = 0; i < seq_len; i++) {     /* Send magic sequence */
+	for (i = 0; i < ARRAY_SIZE(init_seq); i++) {     /* Send magic sequence */
 		if (init_seq[i])
 			gameport_trigger(gameport);
 		udelay(GRIP_INIT_DELAY);
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 8c8cd95a6989..244089c52650 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -8,6 +8,7 @@
  *                    Ivan Hawkes <blackhawk@ivanhawkes.com>
  *               2005 Dominic Cerquetti <binary1230@yahoo.com>
  *               2006 Adam Buchbinder <adam.buchbinder@gmail.com>
+ *               2007 Jan Kratochvil <honza@jikos.cz>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -28,6 +29,7 @@
  *  - information from     http://euc.jp/periphs/xbox-controller.ja.html
  *  - the iForce driver    drivers/char/joystick/iforce.c
  *  - the skeleton-driver  drivers/usb/usb-skeleton.c
+ *  - Xbox 360 information http://www.free60.org/wiki/Gamepad
  *
  * Thanks to:
  *  - ITO Takayuki for providing essential xpad information on his website
@@ -88,6 +90,9 @@
 #define MAP_DPAD_TO_AXES       1
 #define MAP_DPAD_UNKNOWN       -1
 
+#define XTYPE_XBOX        0
+#define XTYPE_XBOX360     1
+
 static int dpad_to_buttons;
 module_param(dpad_to_buttons, bool, S_IRUGO);
 MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
@@ -97,40 +102,42 @@ static const struct xpad_device {
 	u16 idProduct;
 	char *name;
 	u8 dpad_mapping;
+	u8 xtype;
 } xpad_device[] = {
-	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES },
-	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES },
-	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES },
-	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES },
-	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS },
-	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES },
-	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES },
-	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES },
-	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES },
-	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES },
-	{ 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES },
-	{ 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES },
-	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES },
-	{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES },
-	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS },
-	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES },
-	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS },
-	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
-	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES },
-	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES },
-	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES },
-	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES},
-	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES },
-	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES },
-	{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES },
-	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES },
-	{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES },
-	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES },
-	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES },
-	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS },
-	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS },
-	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES },
-	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN }
+	{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+	{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_XBOX }
 };
 
 static const signed short xpad_btn[] = {
@@ -146,6 +153,12 @@ static const signed short xpad_btn_pad[] = {
 	-1				/* terminating entry */
 };
 
+static const signed short xpad360_btn[] = {  /* buttons for x360 controller */
+	BTN_TL, BTN_TR,		/* Button LB/RB */
+	BTN_MODE,		/* The big X button */
+	-1
+};
+
 static const signed short xpad_abs[] = {
 	ABS_X, ABS_Y,		/* left stick */
 	ABS_RX, ABS_RY,		/* right stick */
@@ -159,8 +172,12 @@ static const signed short xpad_abs_pad[] = {
 	-1			/* terminating entry */
 };
 
+/* Xbox 360 has a vendor-specific (sub)class, so we cannot match it with only
+ * USB_INTERFACE_INFO, more to that this device has 4 InterfaceProtocols,
+ * but we need only one of them. */
 static struct usb_device_id xpad_table [] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
+	{ USB_DEVICE_INTERFACE_PROTOCOL(0x045e, 0x028e, 1) },	/* X-Box 360 controller */
 	{ }
 };
 
@@ -174,9 +191,16 @@ struct usb_xpad {
 	unsigned char *idata;		/* input data */
 	dma_addr_t idata_dma;
 
+#ifdef CONFIG_JOYSTICK_XPAD_FF
+	struct urb *irq_out;		/* urb for interrupt out report */
+	unsigned char *odata;		/* output data */
+	dma_addr_t odata_dma;
+#endif
+
 	char phys[65];			/* physical device path */
 
 	int dpad_mapping;		/* map d-pad to buttons or to axes */
+	int xtype;			/* type of xbox device */
 };
 
 /*
@@ -212,8 +236,8 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 	} else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ {
 		input_report_key(dev, BTN_LEFT,  data[2] & 0x04);
 		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
-		input_report_key(dev, BTN_0,     data[2] & 0x01); // up
-		input_report_key(dev, BTN_1,     data[2] & 0x02); // down
+		input_report_key(dev, BTN_0,     data[2] & 0x01); /* up */
+		input_report_key(dev, BTN_1,     data[2] & 0x02); /* down */
 	}
 
 	/* start/back buttons and stick press left/right */
@@ -235,6 +259,64 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d
 	input_sync(dev);
 }
 
+/*
+ *	xpad360_process_packet
+ *
+ *	Completes a request by converting the data into events for the
+ *	input subsystem. It is version for xbox 360 controller
+ *
+ *	The used report descriptor was taken from:
+ *		http://www.free60.org/wiki/Gamepad
+ */
+
+static void xpad360_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
+{
+	struct input_dev *dev = xpad->dev;
+
+	/* digital pad */
+	if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) {
+		input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04));
+		input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01));
+	} else if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) {
+		/* dpad as buttons (right, left, down, up) */
+		input_report_key(dev, BTN_LEFT, data[2] & 0x04);
+		input_report_key(dev, BTN_RIGHT, data[2] & 0x08);
+		input_report_key(dev, BTN_0, data[2] & 0x01);	/* up */
+		input_report_key(dev, BTN_1, data[2] & 0x02);	/* down */
+	}
+
+	/* start/back buttons */
+	input_report_key(dev, BTN_START,  data[2] & 0x10);
+	input_report_key(dev, BTN_BACK,   data[2] & 0x20);
+
+	/* stick press left/right */
+	input_report_key(dev, BTN_THUMBL, data[2] & 0x40);
+	input_report_key(dev, BTN_THUMBR, data[2] & 0x80);
+
+	/* buttons A,B,X,Y,TL,TR and MODE */
+	input_report_key(dev, BTN_A,	data[3] & 0x10);
+	input_report_key(dev, BTN_B,	data[3] & 0x20);
+	input_report_key(dev, BTN_X,	data[3] & 0x40);
+	input_report_key(dev, BTN_Y,	data[3] & 0x80);
+	input_report_key(dev, BTN_TL,	data[3] & 0x01);
+	input_report_key(dev, BTN_TR,	data[3] & 0x02);
+	input_report_key(dev, BTN_MODE,	data[3] & 0x04);
+
+	/* left stick */
+	input_report_abs(dev, ABS_X, (__s16) (((__s16)data[7] << 8) | (__s16)data[6]));
+	input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[9] << 8) | (__s16)data[8]));
+
+	/* right stick */
+	input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[11] << 8) | (__s16)data[10]));
+	input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[13] << 8) | (__s16)data[12]));
+
+	/* triggers left/right */
+	input_report_abs(dev, ABS_Z, data[4]);
+	input_report_abs(dev, ABS_RZ, data[5]);
+
+	input_sync(dev);
+}
+
 static void xpad_irq_in(struct urb *urb)
 {
 	struct usb_xpad *xpad = urb->context;
@@ -255,7 +337,10 @@ static void xpad_irq_in(struct urb *urb)
 		goto exit;
 	}
 
-	xpad_process_packet(xpad, 0, xpad->idata);
+	if (xpad->xtype == XTYPE_XBOX360)
+		xpad360_process_packet(xpad, 0, xpad->idata);
+	else
+		xpad_process_packet(xpad, 0, xpad->idata);
 
 exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
@@ -264,7 +349,114 @@ exit:
 		     __FUNCTION__, retval);
 }
 
-static int xpad_open (struct input_dev *dev)
+#ifdef CONFIG_JOYSTICK_XPAD_FF
+static void xpad_irq_out(struct urb *urb)
+{
+	int retval;
+
+	switch (urb->status) {
+		case 0:
+		/* success */
+		break;
+		case -ECONNRESET:
+		case -ENOENT:
+		case -ESHUTDOWN:
+			/* this urb is terminated, clean up */
+			dbg("%s - urb shutting down with status: %d",  __FUNCTION__, urb->status);
+			return;
+		default:
+			dbg("%s - nonzero urb status received: %d",  __FUNCTION__, urb->status);
+			goto exit;
+	}
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err("%s - usb_submit_urb failed with result %d",
+		   __FUNCTION__, retval);
+}
+
+static int xpad_play_effect(struct input_dev *dev, void *data,
+			    struct ff_effect *effect)
+{
+	struct usb_xpad *xpad = input_get_drvdata(dev);
+
+	if (effect->type == FF_RUMBLE) {
+		__u16 strong = effect->u.rumble.strong_magnitude;
+		__u16 weak = effect->u.rumble.weak_magnitude;
+		xpad->odata[0] = 0x00;
+		xpad->odata[1] = 0x08;
+		xpad->odata[2] = 0x00;
+		xpad->odata[3] = strong / 256;
+		xpad->odata[4] = weak / 256;
+		xpad->odata[5] = 0x00;
+		xpad->odata[6] = 0x00;
+		xpad->odata[7] = 0x00;
+		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+	}
+
+	return 0;
+}
+
+static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad)
+{
+	struct usb_endpoint_descriptor *ep_irq_out;
+	int error = -ENOMEM;
+
+	if (xpad->xtype != XTYPE_XBOX360)
+		return 0;
+
+	xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN,
+				       GFP_ATOMIC, &xpad->odata_dma );
+	if (!xpad->odata)
+		goto fail1;
+
+	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
+	if (!xpad->irq_out)
+		goto fail2;
+
+	ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
+	usb_fill_int_urb(xpad->irq_out, xpad->udev,
+			 usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress),
+			 xpad->odata, XPAD_PKT_LEN,
+			 xpad_irq_out, xpad, ep_irq_out->bInterval);
+	xpad->irq_out->transfer_dma = xpad->odata_dma;
+	xpad->irq_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);
+
+	error = input_ff_create_memless(xpad->dev, NULL, xpad_play_effect);
+	if (error)
+		goto fail2;
+
+	return 0;
+
+ fail2:	usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma);
+ fail1:	return error;
+}
+
+static void xpad_stop_ff(struct usb_xpad *xpad)
+{
+	if (xpad->xtype == XTYPE_XBOX360)
+		usb_kill_urb(xpad->irq_out);
+}
+
+static void xpad_deinit_ff(struct usb_xpad *xpad)
+{
+	if (xpad->xtype == XTYPE_XBOX360) {
+		usb_free_urb(xpad->irq_out);
+		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
+				xpad->odata, xpad->odata_dma);
+	}
+}
+
+#else
+static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; }
+static void xpad_stop_ff(struct usb_xpad *xpad) { }
+static void xpad_deinit_ff(struct usb_xpad *xpad) { }
+#endif
+
+static int xpad_open(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
@@ -275,11 +467,12 @@ static int xpad_open (struct input_dev *dev)
 	return 0;
 }
 
-static void xpad_close (struct input_dev *dev)
+static void xpad_close(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
 	usb_kill_urb(xpad->irq_in);
+	xpad_stop_ff(xpad);
 }
 
 static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
@@ -335,6 +528,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	xpad->udev = udev;
 	xpad->dpad_mapping = xpad_device[i].dpad_mapping;
+	xpad->xtype = xpad_device[i].xtype;
 	if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN)
 		xpad->dpad_mapping = dpad_to_buttons;
 	xpad->dev = input_dev;
@@ -356,6 +550,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	/* set up buttons */
 	for (i = 0; xpad_btn[i] >= 0; i++)
 		set_bit(xpad_btn[i], input_dev->keybit);
+	if (xpad->xtype == XTYPE_XBOX360)
+		for (i = 0; xpad360_btn[i] >= 0; i++)
+			set_bit(xpad360_btn[i], input_dev->keybit);
 	if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS)
 		for (i = 0; xpad_btn_pad[i] >= 0; i++)
 			set_bit(xpad_btn_pad[i], input_dev->keybit);
@@ -367,6 +564,10 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		for (i = 0; xpad_abs_pad[i] >= 0; i++)
 		    xpad_set_up_abs(input_dev, xpad_abs_pad[i]);
 
+	error = xpad_init_ff(intf, xpad);
+	if (error)
+		goto fail2;
+
 	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
 	usb_fill_int_urb(xpad->irq_in, udev,
 			 usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress),
@@ -396,10 +597,10 @@ static void xpad_disconnect(struct usb_interface *intf)
 
 	usb_set_intfdata(intf, NULL);
 	if (xpad) {
-		usb_kill_urb(xpad->irq_in);
 		input_unregister_device(xpad->dev);
+		xpad_deinit_ff(xpad);
 		usb_free_urb(xpad->irq_in);
-		usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN,
+		usb_buffer_free(xpad->udev, XPAD_PKT_LEN,
 				xpad->idata, xpad->idata_dma);
 		kfree(xpad);
 	}
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 9950fcb33650..41fc3d03b6eb 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -89,7 +89,7 @@ static unsigned char atkbd_set2_keycode[512] = {
 	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
 	217,100,255,  0, 97,165,  0,  0,156,  0,  0,  0,  0,  0,  0,125,
 	173,114,  0,113,  0,  0,  0,126,128,  0,  0,140,  0,  0,  0,127,
-	159,  0,115,  0,164,  0,  0,116,158,  0,150,166,  0,  0,  0,142,
+	159,  0,115,  0,164,  0,  0,116,158,  0,172,166,  0,  0,  0,142,
 	157,  0,  0,  0,  0,  0,  0,  0,155,  0, 98,  0,  0,163,  0,  0,
 	226,  0,  0,  0,  0,  0,  0,  0,  0,255, 96,  0,  0,  0,143,  0,
 	  0,  0,  0,  0,  0,  0,  0,  0,  0,107,  0,105,102,  0,  0,112,
@@ -111,7 +111,7 @@ static unsigned char atkbd_set3_keycode[512] = {
 	 82, 83, 80, 76, 77, 72, 69, 98,  0, 96, 81,  0, 78, 73, 55,183,
 
 	184,185,186,187, 74, 94, 92, 93,  0,  0,  0,125,126,127,112,  0,
-	  0,139,150,163,165,115,152,150,166,140,160,154,113,114,167,168,
+	  0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168,
 	148,149,147,140
 };
 
diff --git a/drivers/input/keyboard/pxa27x_keyboard.c b/drivers/input/keyboard/pxa27x_keyboard.c
index f9e82c9ca421..ebe5eacf2990 100644
--- a/drivers/input/keyboard/pxa27x_keyboard.c
+++ b/drivers/input/keyboard/pxa27x_keyboard.c
@@ -140,7 +140,7 @@ static int pxakbd_resume(struct platform_device *pdev)
 		KPREC = pdata->reg_kprec;
 
 		/* Enable unit clock */
-		pxa_set_cken(CKEN19_KEYPAD, 1);
+		pxa_set_cken(CKEN_KEYPAD, 1);
 	}
 
 	mutex_unlock(&input_dev->mutex);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 88e29074ac90..9b26574f1466 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -65,9 +65,13 @@ config INPUT_COBALT_BTNS
 config INPUT_WISTRON_BTNS
 	tristate "x86 Wistron laptop button interface"
 	depends on X86 && !X86_64
+	select INPUT_POLLDEV
+	select NEW_LEDS
+	select LEDS_CLASS
 	help
 	  Say Y here for support of Winstron laptop button interface, used on
-	  laptops of various brands, including Acer and Fujitsu-Siemens.
+	  laptops of various brands, including Acer and Fujitsu-Siemens. If
+	  available, mail and wifi leds will be controlable via /sys/class/leds.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called wistron_btns.
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 961aad7a0476..60121f10f8d9 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -20,37 +20,31 @@
 #include <linux/io.h>
 #include <linux/dmi.h>
 #include <linux/init.h>
-#include <linux/input.h>
+#include <linux/input-polldev.h>
 #include <linux/interrupt.h>
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/mc146818rtc.h>
 #include <linux/module.h>
 #include <linux/preempt.h>
 #include <linux/string.h>
-#include <linux/timer.h>
 #include <linux/types.h>
 #include <linux/platform_device.h>
+#include <linux/leds.h>
 
-/*
- * Number of attempts to read data from queue per poll;
- * the queue can hold up to 31 entries
- */
-#define MAX_POLL_ITERATIONS 64
-
-#define POLL_FREQUENCY 10 /* Number of polls per second */
-
-#if POLL_FREQUENCY > HZ
-#error "POLL_FREQUENCY too high"
-#endif
+/* How often we poll keys - msecs */
+#define POLL_INTERVAL_DEFAULT	500 /* when idle */
+#define POLL_INTERVAL_BURST	100 /* when a key was recently pressed */
 
 /* BIOS subsystem IDs */
 #define WIFI		0x35
 #define BLUETOOTH	0x34
+#define MAIL_LED	0x31
 
 MODULE_AUTHOR("Miloslav Trmac <mitr@volny.cz>");
 MODULE_DESCRIPTION("Wistron laptop button driver");
 MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.2");
+MODULE_VERSION("0.3");
 
 static int force; /* = 0; */
 module_param(force, bool, 0);
@@ -248,9 +242,10 @@ enum { KE_END, KE_KEY, KE_SW, KE_WIFI, KE_BLUETOOTH };
 #define FE_WIFI_LED 0x02
 #define FE_UNTESTED 0x80
 
-static const struct key_entry *keymap; /* = NULL; Current key map */
+static struct key_entry *keymap; /* = NULL; Current key map */
 static int have_wifi;
 static int have_bluetooth;
+static int have_leds;
 
 static int __init dmi_matched(struct dmi_system_id *dmi)
 {
@@ -263,6 +258,8 @@ static int __init dmi_matched(struct dmi_system_id *dmi)
 		else if (key->type == KE_BLUETOOTH)
 			have_bluetooth = 1;
 	}
+	have_leds = key->code & (FE_MAIL_LED | FE_WIFI_LED);
+
 	return 1;
 }
 
@@ -966,118 +963,163 @@ static int __init select_keymap(void)
 
  /* Input layer interface */
 
-static struct input_dev *input_dev;
+static struct input_polled_dev *wistron_idev;
+static unsigned long jiffies_last_press;
+static int wifi_enabled;
+static int bluetooth_enabled;
 
-static int __devinit setup_input_dev(void)
+static void report_key(struct input_dev *dev, unsigned int keycode)
 {
-	const struct key_entry *key;
-	int error;
+	input_report_key(dev, keycode, 1);
+	input_sync(dev);
+	input_report_key(dev, keycode, 0);
+	input_sync(dev);
+}
 
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
+static void report_switch(struct input_dev *dev, unsigned int code, int value)
+{
+	input_report_switch(dev, code, value);
+	input_sync(dev);
+}
 
-	input_dev->name = "Wistron laptop buttons";
-	input_dev->phys = "wistron/input0";
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->cdev.dev = &wistron_device->dev;
 
-	for (key = keymap; key->type != KE_END; key++) {
-		switch (key->type) {
-			case KE_KEY:
-				set_bit(EV_KEY, input_dev->evbit);
-				set_bit(key->keycode, input_dev->keybit);
-				break;
+ /* led management */
+static void wistron_mail_led_set(struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	bios_set_state(MAIL_LED, (value != LED_OFF) ? 1 : 0);
+}
 
-			case KE_SW:
-				set_bit(EV_SW, input_dev->evbit);
-				set_bit(key->sw.code, input_dev->swbit);
-				break;
+/* same as setting up wifi card, but for laptops on which the led is managed */
+static void wistron_wifi_led_set(struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	bios_set_state(WIFI, (value != LED_OFF) ? 1 : 0);
+}
 
-			default:
-				;
-		}
-	}
+static struct led_classdev wistron_mail_led = {
+	.name			= "mail:green",
+	.brightness_set		= wistron_mail_led_set,
+};
 
-	/* reads information flags on KE_END */
-	if (key->code & FE_UNTESTED)
-		printk(KERN_WARNING "Untested laptop multimedia keys, "
-			"please report success or failure to eric.piel"
-			"@tremplin-utc.net\n");
+static struct led_classdev wistron_wifi_led = {
+	.name			= "wifi:red",
+	.brightness_set		= wistron_wifi_led_set,
+};
 
-	error = input_register_device(input_dev);
-	if (error) {
-		input_free_device(input_dev);
-		return error;
+static void __devinit wistron_led_init(struct device *parent)
+{
+	if (have_leds & FE_WIFI_LED) {
+		u16 wifi = bios_get_default_setting(WIFI);
+		if (wifi & 1) {
+			wistron_wifi_led.brightness = (wifi & 2) ? LED_FULL : LED_OFF;
+			if (led_classdev_register(parent, &wistron_wifi_led))
+				have_leds &= ~FE_WIFI_LED;
+			else
+				bios_set_state(WIFI, wistron_wifi_led.brightness);
+
+		} else
+			have_leds &= ~FE_WIFI_LED;
 	}
 
-	return 0;
+	if (have_leds & FE_MAIL_LED) {
+		/* bios_get_default_setting(MAIL) always retuns 0, so just turn the led off */
+		wistron_mail_led.brightness = LED_OFF;
+		if (led_classdev_register(parent, &wistron_mail_led))
+			have_leds &= ~FE_MAIL_LED;
+		else
+			bios_set_state(MAIL_LED, wistron_mail_led.brightness);
+	}
 }
 
-static void report_key(unsigned keycode)
+static void __devexit wistron_led_remove(void)
 {
-	input_report_key(input_dev, keycode, 1);
-	input_sync(input_dev);
-	input_report_key(input_dev, keycode, 0);
-	input_sync(input_dev);
+	if (have_leds & FE_MAIL_LED)
+		led_classdev_unregister(&wistron_mail_led);
+
+	if (have_leds & FE_WIFI_LED)
+		led_classdev_unregister(&wistron_wifi_led);
 }
 
-static void report_switch(unsigned code, int value)
+static inline void wistron_led_suspend(void)
 {
-	input_report_switch(input_dev, code, value);
-	input_sync(input_dev);
+	if (have_leds & FE_MAIL_LED)
+		led_classdev_suspend(&wistron_mail_led);
+
+	if (have_leds & FE_WIFI_LED)
+		led_classdev_suspend(&wistron_wifi_led);
 }
 
- /* Driver core */
+static inline void wistron_led_resume(void)
+{
+	if (have_leds & FE_MAIL_LED)
+		led_classdev_resume(&wistron_mail_led);
 
-static int wifi_enabled;
-static int bluetooth_enabled;
+	if (have_leds & FE_WIFI_LED)
+		led_classdev_resume(&wistron_wifi_led);
+}
+
+static struct key_entry *wistron_get_entry_by_scancode(int code)
+{
+	struct key_entry *key;
 
-static void poll_bios(unsigned long);
+	for (key = keymap; key->type != KE_END; key++)
+		if (code == key->code)
+			return key;
 
-static struct timer_list poll_timer = TIMER_INITIALIZER(poll_bios, 0, 0);
+	return NULL;
+}
 
-static void handle_key(u8 code)
+static struct key_entry *wistron_get_entry_by_keycode(int keycode)
 {
-	const struct key_entry *key;
+	struct key_entry *key;
 
-	for (key = keymap; key->type != KE_END; key++) {
-		if (code == key->code) {
-			switch (key->type) {
-			case KE_KEY:
-				report_key(key->keycode);
-				break;
+	for (key = keymap; key->type != KE_END; key++)
+		if (key->type == KE_KEY && keycode == key->keycode)
+			return key;
 
-			case KE_SW:
-				report_switch(key->sw.code, key->sw.value);
-				break;
+	return NULL;
+}
 
-			case KE_WIFI:
-				if (have_wifi) {
-					wifi_enabled = !wifi_enabled;
-					bios_set_state(WIFI, wifi_enabled);
-				}
-				break;
+static void handle_key(u8 code)
+{
+	const struct key_entry *key = wistron_get_entry_by_scancode(code);
 
-			case KE_BLUETOOTH:
-				if (have_bluetooth) {
-					bluetooth_enabled = !bluetooth_enabled;
-					bios_set_state(BLUETOOTH, bluetooth_enabled);
-				}
-				break;
+	if (key) {
+		switch (key->type) {
+		case KE_KEY:
+			report_key(wistron_idev->input, key->keycode);
+			break;
 
-			case KE_END:
-				break;
-			default:
-				BUG();
+		case KE_SW:
+			report_switch(wistron_idev->input,
+				      key->sw.code, key->sw.value);
+			break;
+
+		case KE_WIFI:
+			if (have_wifi) {
+				wifi_enabled = !wifi_enabled;
+				bios_set_state(WIFI, wifi_enabled);
+			}
+			break;
+
+		case KE_BLUETOOTH:
+			if (have_bluetooth) {
+				bluetooth_enabled = !bluetooth_enabled;
+				bios_set_state(BLUETOOTH, bluetooth_enabled);
 			}
-			return;
+			break;
+
+		default:
+			BUG();
 		}
-	}
-	printk(KERN_NOTICE "wistron_btns: Unknown key code %02X\n", code);
+		jiffies_last_press = jiffies;
+	} else
+		printk(KERN_NOTICE
+			"wistron_btns: Unknown key code %02X\n", code);
 }
 
-static void poll_bios(unsigned long discard)
+static void poll_bios(bool discard)
 {
 	u8 qlen;
 	u16 val;
@@ -1090,15 +1132,118 @@ static void poll_bios(unsigned long discard)
 		if (val != 0 && !discard)
 			handle_key((u8)val);
 	}
+}
+
+static void wistron_flush(struct input_polled_dev *dev)
+{
+	/* Flush stale event queue */
+	poll_bios(true);
+}
+
+static void wistron_poll(struct input_polled_dev *dev)
+{
+	poll_bios(false);
+
+	/* Increase poll frequency if user is currently pressing keys (< 2s ago) */
+	if (time_before(jiffies, jiffies_last_press + 2 * HZ))
+		dev->poll_interval = POLL_INTERVAL_BURST;
+	else
+		dev->poll_interval = POLL_INTERVAL_DEFAULT;
+}
+
+static int wistron_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+{
+	const struct key_entry *key = wistron_get_entry_by_scancode(scancode);
+
+	if (key && key->type == KE_KEY) {
+		*keycode = key->keycode;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int wistron_setkeycode(struct input_dev *dev, int scancode, int keycode)
+{
+	struct key_entry *key;
+	int old_keycode;
+
+	if (keycode < 0 || keycode > KEY_MAX)
+		return -EINVAL;
+
+	key = wistron_get_entry_by_scancode(scancode);
+	if (key && key->type == KE_KEY) {
+		old_keycode = key->keycode;
+		key->keycode = keycode;
+		set_bit(keycode, dev->keybit);
+		if (!wistron_get_entry_by_keycode(old_keycode))
+			clear_bit(old_keycode, dev->keybit);
+		return 0;
+	}
 
-	mod_timer(&poll_timer, jiffies + HZ / POLL_FREQUENCY);
+	return -EINVAL;
 }
 
+static int __devinit setup_input_dev(void)
+{
+	const struct key_entry *key;
+	struct input_dev *input_dev;
+	int error;
+
+	wistron_idev = input_allocate_polled_device();
+	if (!wistron_idev)
+		return -ENOMEM;
+
+	wistron_idev->flush = wistron_flush;
+	wistron_idev->poll = wistron_poll;
+	wistron_idev->poll_interval = POLL_INTERVAL_DEFAULT;
+
+	input_dev = wistron_idev->input;
+	input_dev->name = "Wistron laptop buttons";
+	input_dev->phys = "wistron/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &wistron_device->dev;
+
+	input_dev->getkeycode = wistron_getkeycode;
+	input_dev->setkeycode = wistron_setkeycode;
+
+	for (key = keymap; key->type != KE_END; key++) {
+		switch (key->type) {
+			case KE_KEY:
+				set_bit(EV_KEY, input_dev->evbit);
+				set_bit(key->keycode, input_dev->keybit);
+				break;
+
+			case KE_SW:
+				set_bit(EV_SW, input_dev->evbit);
+				set_bit(key->sw.code, input_dev->swbit);
+				break;
+
+			default:
+				break;
+		}
+	}
+
+	/* reads information flags on KE_END */
+	if (key->code & FE_UNTESTED)
+		printk(KERN_WARNING "Untested laptop multimedia keys, "
+			"please report success or failure to eric.piel"
+			"@tremplin-utc.net\n");
+
+	error = input_register_polled_device(wistron_idev);
+	if (error) {
+		input_free_polled_device(wistron_idev);
+		return error;
+	}
+
+	return 0;
+}
+
+/* Driver core */
+
 static int __devinit wistron_probe(struct platform_device *dev)
 {
-	int err = setup_input_dev();
-	if (err)
-		return err;
+	int err;
 
 	bios_attach();
 	cmos_address = bios_get_cmos_address();
@@ -1125,15 +1270,21 @@ static int __devinit wistron_probe(struct platform_device *dev)
 			bios_set_state(BLUETOOTH, bluetooth_enabled);
 	}
 
-	poll_bios(1); /* Flush stale event queue and arm timer */
+	wistron_led_init(&dev->dev);
+	err = setup_input_dev();
+	if (err) {
+		bios_detach();
+		return err;
+	}
 
 	return 0;
 }
 
 static int __devexit wistron_remove(struct platform_device *dev)
 {
-	del_timer_sync(&poll_timer);
-	input_unregister_device(input_dev);
+	wistron_led_remove();
+	input_unregister_polled_device(wistron_idev);
+	input_free_polled_device(wistron_idev);
 	bios_detach();
 
 	return 0;
@@ -1142,14 +1293,13 @@ static int __devexit wistron_remove(struct platform_device *dev)
 #ifdef CONFIG_PM
 static int wistron_suspend(struct platform_device *dev, pm_message_t state)
 {
-	del_timer_sync(&poll_timer);
-
 	if (have_wifi)
 		bios_set_state(WIFI, 0);
 
 	if (have_bluetooth)
 		bios_set_state(BLUETOOTH, 0);
 
+	wistron_led_suspend();
 	return 0;
 }
 
@@ -1161,7 +1311,8 @@ static int wistron_resume(struct platform_device *dev)
 	if (have_bluetooth)
 		bios_set_state(BLUETOOTH, bluetooth_enabled);
 
-	poll_bios(1);
+	wistron_led_resume();
+	poll_bios(true);
 
 	return 0;
 }
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 50e06e8dd05d..7bbea097cda2 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -216,4 +216,20 @@ config MOUSE_HIL
 	help
 	  Say Y here to support HIL pointers.
 
+config MOUSE_GPIO
+	tristate "GPIO mouse"
+	depends on GENERIC_GPIO
+	select INPUT_POLLDEV
+	help
+	  This driver simulates a mouse on GPIO lines of various CPUs (and some
+	  other chips).
+
+	  Say Y here if your device has buttons or a simple joystick connected
+	  directly to GPIO lines. Your board-specific setup logic must also
+	  provide a platform device and platform data saying which GPIOs are
+	  used.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio_mouse.
+
 endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index aa4ba878533f..9e6e36330820 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_PS2)		+= psmouse.o
 obj-$(CONFIG_MOUSE_SERIAL)	+= sermouse.o
 obj-$(CONFIG_MOUSE_HIL)		+= hil_ptr.o
 obj-$(CONFIG_MOUSE_VSXXXAA)	+= vsxxxaa.o
+obj-$(CONFIG_MOUSE_GPIO)	+= gpio_mouse.o
 
 psmouse-objs := psmouse-base.o synaptics.o
 
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
new file mode 100644
index 000000000000..0936d6ba015c
--- /dev/null
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -0,0 +1,196 @@
+/*
+ * Driver for simulating a mouse on GPIO lines.
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/input-polldev.h>
+#include <linux/gpio_mouse.h>
+
+#include <asm/gpio.h>
+
+/*
+ * Timer function which is run every scan_ms ms when the device is opened.
+ * The dev input varaible is set to the the input_dev pointer.
+ */
+static void gpio_mouse_scan(struct input_polled_dev *dev)
+{
+	struct gpio_mouse_platform_data *gpio = dev->private;
+	struct input_dev *input = dev->input;
+	int x, y;
+
+	if (gpio->bleft >= 0)
+		input_report_key(input, BTN_LEFT,
+				gpio_get_value(gpio->bleft) ^ gpio->polarity);
+	if (gpio->bmiddle >= 0)
+		input_report_key(input, BTN_MIDDLE,
+				gpio_get_value(gpio->bmiddle) ^ gpio->polarity);
+	if (gpio->bright >= 0)
+		input_report_key(input, BTN_RIGHT,
+				gpio_get_value(gpio->bright) ^ gpio->polarity);
+
+	x = (gpio_get_value(gpio->right) ^ gpio->polarity)
+		- (gpio_get_value(gpio->left) ^ gpio->polarity);
+	y = (gpio_get_value(gpio->down) ^ gpio->polarity)
+		- (gpio_get_value(gpio->up) ^ gpio->polarity);
+
+	input_report_rel(input, REL_X, x);
+	input_report_rel(input, REL_Y, y);
+	input_sync(input);
+}
+
+static int __init gpio_mouse_probe(struct platform_device *pdev)
+{
+	struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data;
+	struct input_polled_dev *input_poll;
+	struct input_dev *input;
+	int pin, i;
+	int error;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		error = -ENXIO;
+		goto out;
+	}
+
+	if (pdata->scan_ms < 0) {
+		dev_err(&pdev->dev, "invalid scan time\n");
+		error = -EINVAL;
+		goto out;
+	}
+
+	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
+		pin = pdata->pins[i];
+
+		if (pin < 0) {
+
+			if (i <= GPIO_MOUSE_PIN_RIGHT) {
+				/* Mouse direction is required. */
+				dev_err(&pdev->dev,
+					"missing GPIO for directions\n");
+				error = -EINVAL;
+				goto out_free_gpios;
+			}
+
+			if (i == GPIO_MOUSE_PIN_BLEFT)
+				dev_dbg(&pdev->dev, "no left button defined\n");
+
+		} else {
+			error = gpio_request(pin, "gpio_mouse");
+			if (error) {
+				dev_err(&pdev->dev, "fail %d pin (%d idx)\n",
+					pin, i);
+				goto out_free_gpios;
+			}
+
+			gpio_direction_input(pin);
+		}
+	}
+
+	input_poll = input_allocate_polled_device();
+	if (!input_poll) {
+		dev_err(&pdev->dev, "not enough memory for input device\n");
+		error = -ENOMEM;
+		goto out_free_gpios;
+	}
+
+	platform_set_drvdata(pdev, input_poll);
+
+	/* set input-polldev handlers */
+	input_poll->private = pdata;
+	input_poll->poll = gpio_mouse_scan;
+	input_poll->poll_interval = pdata->scan_ms;
+
+	input = input_poll->input;
+	input->name = pdev->name;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = &pdev->dev;
+
+	input_set_capability(input, EV_REL, REL_X);
+	input_set_capability(input, EV_REL, REL_Y);
+	if (pdata->bleft >= 0)
+		input_set_capability(input, EV_KEY, BTN_LEFT);
+	if (pdata->bmiddle >= 0)
+		input_set_capability(input, EV_KEY, BTN_MIDDLE);
+	if (pdata->bright >= 0)
+		input_set_capability(input, EV_KEY, BTN_RIGHT);
+
+	error = input_register_polled_device(input_poll);
+	if (error) {
+		dev_err(&pdev->dev, "could not register input device\n");
+		goto out_free_polldev;
+	}
+
+	dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n",
+			pdata->scan_ms,
+			pdata->bleft < 0 ? "" : "left ",
+			pdata->bmiddle < 0 ? "" : "middle ",
+			pdata->bright < 0 ? "" : "right");
+
+	return 0;
+
+ out_free_polldev:
+	input_free_polled_device(input_poll);
+	platform_set_drvdata(pdev, NULL);
+
+ out_free_gpios:
+	while (--i >= 0) {
+		pin = pdata->pins[i];
+		if (pin)
+			gpio_free(pin);
+	}
+ out:
+	return error;
+}
+
+static int __devexit gpio_mouse_remove(struct platform_device *pdev)
+{
+	struct input_polled_dev *input = platform_get_drvdata(pdev);
+	struct gpio_mouse_platform_data *pdata = input->private;
+	int pin, i;
+
+	input_unregister_polled_device(input);
+	input_free_polled_device(input);
+
+	for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) {
+		pin = pdata->pins[i];
+		if (pin >= 0)
+			gpio_free(pin);
+	}
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+struct platform_driver gpio_mouse_device_driver = {
+	.remove		= __devexit_p(gpio_mouse_remove),
+	.driver		= {
+		.name	= "gpio_mouse",
+	}
+};
+
+static int __init gpio_mouse_init(void)
+{
+	return platform_driver_probe(&gpio_mouse_device_driver,
+			gpio_mouse_probe);
+}
+module_init(gpio_mouse_init);
+
+static void __exit gpio_mouse_exit(void)
+{
+	platform_driver_unregister(&gpio_mouse_device_driver);
+}
+module_exit(gpio_mouse_exit);
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
+MODULE_DESCRIPTION("GPIO mouse driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index f15f695777f8..b9f0fb2530e2 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -178,6 +178,15 @@ static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
 	}
 
 /*
+ * Cortron PS2 Trackball reports SIDE button on the 4th bit of the first
+ * byte.
+ */
+	if (psmouse->type == PSMOUSE_CORTRON) {
+		input_report_key(dev, BTN_SIDE, (packet[0] >> 3) & 1);
+		packet[0] |= 0x08;
+	}
+
+/*
  * Generic PS/2 Mouse
  */
 
@@ -539,6 +548,20 @@ static int ps2bare_detect(struct psmouse *psmouse, int set_properties)
 	return 0;
 }
 
+/*
+ * Cortron PS/2 protocol detection. There's no special way to detect it, so it
+ * must be forced by sysfs protocol writing.
+ */
+static int cortron_detect(struct psmouse *psmouse, int set_properties)
+{
+	if (set_properties) {
+		psmouse->vendor = "Cortron";
+		psmouse->name = "PS/2 Trackball";
+		set_bit(BTN_SIDE, psmouse->dev->keybit);
+	}
+
+	return 0;
+}
 
 /*
  * psmouse_extensions() probes for any extensions to the basic PS/2 protocol
@@ -740,6 +763,12 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 	},
 #endif
 	{
+		.type		= PSMOUSE_CORTRON,
+		.name		= "CortronPS/2",
+		.alias		= "cortps",
+		.detect		= cortron_detect,
+	},
+	{
 		.type		= PSMOUSE_AUTO,
 		.name		= "auto",
 		.alias		= "any",
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 3964e8acbc54..1317bdd8cc7c 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -88,6 +88,7 @@ enum psmouse_type {
 	PSMOUSE_LIFEBOOK,
 	PSMOUSE_TRACKPOINT,
 	PSMOUSE_TOUCHKIT_PS2,
+	PSMOUSE_CORTRON,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 
@@ -118,7 +119,6 @@ static struct psmouse_attribute psmouse_attr_##_name = {			\
 		.attr	= {							\
 			.name	= __stringify(_name),				\
 			.mode	= _mode,					\
-			.owner	= THIS_MODULE,					\
 		},								\
 		.show	= psmouse_attr_show_helper,				\
 		.store	= psmouse_attr_set_helper,				\
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 3f4866d8d18c..9173916b8be5 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -64,6 +64,7 @@ struct mousedev {
 	wait_queue_head_t wait;
 	struct list_head client_list;
 	struct input_handle handle;
+	struct device dev;
 
 	struct list_head mixdev_node;
 	int mixdev_open;
@@ -112,7 +113,7 @@ static unsigned char mousedev_imex_seq[] = { 0xf3, 200, 0xf3, 200, 0xf3, 80 };
 static struct input_handler mousedev_handler;
 
 static struct mousedev *mousedev_table[MOUSEDEV_MINORS];
-static struct mousedev mousedev_mix;
+static struct mousedev *mousedev_mix;
 static LIST_HEAD(mousedev_mix_list);
 
 #define fx(i)  (mousedev->old_x[(mousedev->pkt_count - (i)) & 03])
@@ -218,10 +219,10 @@ static void mousedev_key_event(struct mousedev *mousedev, unsigned int code, int
 
 	if (value) {
 		set_bit(index, &mousedev->packet.buttons);
-		set_bit(index, &mousedev_mix.packet.buttons);
+		set_bit(index, &mousedev_mix->packet.buttons);
 	} else {
 		clear_bit(index, &mousedev->packet.buttons);
-		clear_bit(index, &mousedev_mix.packet.buttons);
+		clear_bit(index, &mousedev_mix->packet.buttons);
 	}
 }
 
@@ -287,11 +288,11 @@ static void mousedev_touchpad_touch(struct mousedev *mousedev, int value)
 			 * motion packet so we won't mess current position.
 			 */
 			set_bit(0, &mousedev->packet.buttons);
-			set_bit(0, &mousedev_mix.packet.buttons);
-			mousedev_notify_readers(mousedev, &mousedev_mix.packet);
-			mousedev_notify_readers(&mousedev_mix, &mousedev_mix.packet);
+			set_bit(0, &mousedev_mix->packet.buttons);
+			mousedev_notify_readers(mousedev, &mousedev_mix->packet);
+			mousedev_notify_readers(mousedev_mix, &mousedev_mix->packet);
 			clear_bit(0, &mousedev->packet.buttons);
-			clear_bit(0, &mousedev_mix.packet.buttons);
+			clear_bit(0, &mousedev_mix->packet.buttons);
 		}
 		mousedev->touch = mousedev->pkt_count = 0;
 		mousedev->frac_dx = 0;
@@ -343,7 +344,7 @@ static void mousedev_event(struct input_handle *handle, unsigned int type, unsig
 				}
 
 				mousedev_notify_readers(mousedev, &mousedev->packet);
-				mousedev_notify_readers(&mousedev_mix, &mousedev->packet);
+				mousedev_notify_readers(mousedev_mix, &mousedev->packet);
 
 				mousedev->packet.dx = mousedev->packet.dy = mousedev->packet.dz = 0;
 				mousedev->packet.abs_event = 0;
@@ -362,8 +363,10 @@ static int mousedev_fasync(int fd, struct file *file, int on)
 	return retval < 0 ? retval : 0;
 }
 
-static void mousedev_free(struct mousedev *mousedev)
+static void mousedev_free(struct device *dev)
 {
+	struct mousedev *mousedev = container_of(dev, struct mousedev, dev);
+
 	mousedev_table[mousedev->minor] = NULL;
 	kfree(mousedev);
 }
@@ -372,15 +375,16 @@ static int mixdev_add_device(struct mousedev *mousedev)
 {
 	int error;
 
-	if (mousedev_mix.open) {
+	if (mousedev_mix->open) {
 		error = input_open_device(&mousedev->handle);
 		if (error)
 			return error;
 
 		mousedev->open++;
-		mousedev->mixdev_open++;
+		mousedev->mixdev_open = 1;
 	}
 
+	get_device(&mousedev->dev);
 	list_add_tail(&mousedev->mixdev_node, &mousedev_mix_list);
 
 	return 0;
@@ -395,36 +399,40 @@ static void mixdev_remove_device(struct mousedev *mousedev)
 	}
 
 	list_del_init(&mousedev->mixdev_node);
+	put_device(&mousedev->dev);
 }
 
 static void mixdev_open_devices(void)
 {
 	struct mousedev *mousedev;
 
+	if (mousedev_mix->open++)
+		return;
+
 	list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
-		if (mousedev->exist && !mousedev->open) {
-			if (input_open_device(&mousedev->handle))
-				continue;
+		if (!mousedev->mixdev_open) {
+			if (!mousedev->open && mousedev->exist)
+				if (input_open_device(&mousedev->handle))
+					continue;
 
 			mousedev->open++;
-			mousedev->mixdev_open++;
+			mousedev->mixdev_open = 1;
 		}
 	}
 }
 
 static void mixdev_close_devices(void)
 {
-	struct mousedev *mousedev, *next;
+	struct mousedev *mousedev;
 
-	list_for_each_entry_safe(mousedev, next, &mousedev_mix_list, mixdev_node) {
+	if (--mousedev_mix->open)
+		return;
+
+	list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) {
 		if (mousedev->mixdev_open) {
 			mousedev->mixdev_open = 0;
-			if (!--mousedev->open) {
-				if (mousedev->exist)
-					input_close_device(&mousedev->handle);
-				else
-					mousedev_free(mousedev);
-			}
+			if (!--mousedev->open && mousedev->exist)
+				input_close_device(&mousedev->handle);
 		}
 	}
 }
@@ -439,14 +447,12 @@ static int mousedev_release(struct inode *inode, struct file *file)
 	list_del(&client->node);
 	kfree(client);
 
-	if (!--mousedev->open) {
-		if (mousedev->minor == MOUSEDEV_MIX)
-			mixdev_close_devices();
-		else if (mousedev->exist)
-			input_close_device(&mousedev->handle);
-		else
-			mousedev_free(mousedev);
-	}
+	if (mousedev->minor == MOUSEDEV_MIX)
+		mixdev_close_devices();
+	else if (!--mousedev->open && mousedev->exist)
+		input_close_device(&mousedev->handle);
+
+	put_device(&mousedev->dev);
 
 	return 0;
 }
@@ -473,9 +479,13 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	if (!mousedev)
 		return -ENODEV;
 
+	get_device(&mousedev->dev);
+
 	client = kzalloc(sizeof(struct mousedev_client), GFP_KERNEL);
-	if (!client)
-		return -ENOMEM;
+	if (!client) {
+		error = -ENOMEM;
+		goto err_put_mousedev;
+	}
 
 	spin_lock_init(&client->packet_lock);
 	client->pos_x = xres / 2;
@@ -483,21 +493,23 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	client->mousedev = mousedev;
 	list_add_tail(&client->node, &mousedev->client_list);
 
-	if (!mousedev->open++) {
-		if (mousedev->minor == MOUSEDEV_MIX)
-			mixdev_open_devices();
-		else if (mousedev->exist) {
-			error = input_open_device(&mousedev->handle);
-			if (error) {
-				list_del(&client->node);
-				kfree(client);
-				return error;
-			}
-		}
+	if (mousedev->minor == MOUSEDEV_MIX)
+		mixdev_open_devices();
+	else if (!mousedev->open++ && mousedev->exist) {
+		error = input_open_device(&mousedev->handle);
+		if (error)
+			goto err_free_client;
 	}
 
 	file->private_data = client;
 	return 0;
+
+ err_free_client:
+	list_del(&client->node);
+	kfree(client);
+ err_put_mousedev:
+	put_device(&mousedev->dev);
+	return error;
 }
 
 static inline int mousedev_limit_delta(int delta, int limit)
@@ -680,57 +692,96 @@ static const struct file_operations mousedev_fops = {
 	.fasync =	mousedev_fasync,
 };
 
-static int mousedev_connect(struct input_handler *handler, struct input_dev *dev,
-			    const struct input_device_id *id)
+static struct mousedev *mousedev_create(struct input_dev *dev,
+					struct input_handler *handler,
+					int minor)
 {
 	struct mousedev *mousedev;
-	struct class_device *cdev;
-	dev_t devt;
-	int minor;
 	int error;
 
-	for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++);
-	if (minor == MOUSEDEV_MINORS) {
-		printk(KERN_ERR "mousedev: no more free mousedev devices\n");
-		return -ENFILE;
-	}
-
 	mousedev = kzalloc(sizeof(struct mousedev), GFP_KERNEL);
-	if (!mousedev)
-		return -ENOMEM;
+	if (!mousedev) {
+		error = -ENOMEM;
+		goto err_out;
+	}
 
 	INIT_LIST_HEAD(&mousedev->client_list);
 	INIT_LIST_HEAD(&mousedev->mixdev_node);
 	init_waitqueue_head(&mousedev->wait);
 
+	if (minor == MOUSEDEV_MIX)
+		strlcpy(mousedev->name, "mice", sizeof(mousedev->name));
+	else
+		snprintf(mousedev->name, sizeof(mousedev->name),
+			 "mouse%d", minor);
+
 	mousedev->minor = minor;
 	mousedev->exist = 1;
 	mousedev->handle.dev = dev;
 	mousedev->handle.name = mousedev->name;
 	mousedev->handle.handler = handler;
 	mousedev->handle.private = mousedev;
-	sprintf(mousedev->name, "mouse%d", minor);
 
-	mousedev_table[minor] = mousedev;
+	strlcpy(mousedev->dev.bus_id, mousedev->name,
+		sizeof(mousedev->dev.bus_id));
+	mousedev->dev.class = &input_class;
+	if (dev)
+		mousedev->dev.parent = &dev->dev;
+	mousedev->dev.devt = MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor);
+	mousedev->dev.release = mousedev_free;
+	device_initialize(&mousedev->dev);
 
-	devt = MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor),
+	mousedev_table[minor] = mousedev;
 
-	cdev = class_device_create(&input_class, &dev->cdev, devt,
-				   dev->cdev.dev, mousedev->name);
-	if (IS_ERR(cdev)) {
-		error = PTR_ERR(cdev);
+	error = device_add(&mousedev->dev);
+	if (error)
 		goto err_free_mousedev;
+
+	return mousedev;
+
+ err_free_mousedev:
+	put_device(&mousedev->dev);
+ err_out:
+	return ERR_PTR(error);
+}
+
+static void mousedev_destroy(struct mousedev *mousedev)
+{
+	struct mousedev_client *client;
+
+	device_del(&mousedev->dev);
+	mousedev->exist = 0;
+
+	if (mousedev->open) {
+		input_close_device(&mousedev->handle);
+		list_for_each_entry(client, &mousedev->client_list, node)
+			kill_fasync(&client->fasync, SIGIO, POLL_HUP);
+		wake_up_interruptible(&mousedev->wait);
 	}
 
-	/* temporary symlink to keep userspace happy */
-	error = sysfs_create_link(&input_class.subsys.kobj,
-				  &cdev->kobj, mousedev->name);
-	if (error)
-		goto err_cdev_destroy;
+	put_device(&mousedev->dev);
+}
+
+static int mousedev_connect(struct input_handler *handler, struct input_dev *dev,
+			    const struct input_device_id *id)
+{
+	struct mousedev *mousedev;
+	int minor;
+	int error;
+
+	for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++);
+	if (minor == MOUSEDEV_MINORS) {
+		printk(KERN_ERR "mousedev: no more free mousedev devices\n");
+		return -ENFILE;
+	}
+
+	mousedev = mousedev_create(dev, handler, minor);
+	if (IS_ERR(mousedev))
+		return PTR_ERR(mousedev);
 
 	error = input_register_handle(&mousedev->handle);
 	if (error)
-		goto err_remove_link;
+		goto err_delete_mousedev;
 
 	error = mixdev_add_device(mousedev);
 	if (error)
@@ -740,37 +791,18 @@ static int mousedev_connect(struct input_handler *handler, struct input_dev *dev
 
  err_unregister_handle:
 	input_unregister_handle(&mousedev->handle);
- err_remove_link:
-	sysfs_remove_link(&input_class.subsys.kobj, mousedev->name);
- err_cdev_destroy:
-	class_device_destroy(&input_class, devt);
- err_free_mousedev:
-	mousedev_table[minor] = NULL;
-	kfree(mousedev);
+ err_delete_mousedev:
+	device_unregister(&mousedev->dev);
 	return error;
 }
 
 static void mousedev_disconnect(struct input_handle *handle)
 {
 	struct mousedev *mousedev = handle->private;
-	struct mousedev_client *client;
-
-	input_unregister_handle(handle);
-
-	sysfs_remove_link(&input_class.subsys.kobj, mousedev->name);
-	class_device_destroy(&input_class,
-			MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor));
-	mousedev->exist = 0;
 
 	mixdev_remove_device(mousedev);
-
-	if (mousedev->open) {
-		input_close_device(handle);
-		list_for_each_entry(client, &mousedev->client_list, node)
-			kill_fasync(&client->fasync, SIGIO, POLL_HUP);
-		wake_up_interruptible(&mousedev->wait);
-	} else
-		mousedev_free(mousedev);
+	input_unregister_handle(handle);
+	mousedev_destroy(mousedev);
 }
 
 static const struct input_device_id mousedev_ids[] = {
@@ -822,25 +854,16 @@ static int psaux_registered;
 
 static int __init mousedev_init(void)
 {
-	struct class_device *cdev;
 	int error;
 
+	mousedev_mix = mousedev_create(NULL, &mousedev_handler, MOUSEDEV_MIX);
+	if (IS_ERR(mousedev_mix))
+		return PTR_ERR(mousedev_mix);
+
 	error = input_register_handler(&mousedev_handler);
-	if (error)
+	if (error) {
+		mousedev_destroy(mousedev_mix);
 		return error;
-
-	memset(&mousedev_mix, 0, sizeof(struct mousedev));
-	INIT_LIST_HEAD(&mousedev_mix.client_list);
-	init_waitqueue_head(&mousedev_mix.wait);
-	mousedev_table[MOUSEDEV_MIX] = &mousedev_mix;
-	mousedev_mix.exist = 1;
-	mousedev_mix.minor = MOUSEDEV_MIX;
-
-	cdev = class_device_create(&input_class, NULL,
-			MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice");
-	if (IS_ERR(cdev)) {
-		input_unregister_handler(&mousedev_handler);
-		return PTR_ERR(cdev);
 	}
 
 #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
@@ -863,9 +886,8 @@ static void __exit mousedev_exit(void)
 	if (psaux_registered)
 		misc_deregister(&psaux_mouse);
 #endif
-	class_device_destroy(&input_class,
-			MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX));
 	input_unregister_handler(&mousedev_handler);
+	mousedev_destroy(mousedev_mix);
 }
 
 module_init(mousedev_init);
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 887357666c68..0403622ae267 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -160,7 +160,7 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, size_t cou
 {
 	struct serio_raw_list *list = file->private_data;
 	struct serio_raw *serio_raw = list->serio_raw;
-	char c;
+	char uninitialized_var(c);
 	ssize_t retval = 0;
 
 	if (!serio_raw->serio)
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index cc0a498763d8..94683f58c9e1 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -82,8 +82,8 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.5 (May-15-2004)"
-#define DRIVER_AUTHOR  "Bryan W. Headley/Chris Atenasio"
+#define DRIVER_VERSION "v2.3 (May 2, 2007)"
+#define DRIVER_AUTHOR  "Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen"
 #define DRIVER_DESC    "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)"
 
 /*
@@ -112,7 +112,7 @@
  * (returned as Report 3 - absolute coordinates from the mouse)
  *
  *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
- * byte0   0     0     0     0     0     0     1     0
+ * byte0   0     0     0     0     0     0     1     1
  * byte1  X7    X6    X5    X4    X3    X2    X1    X0
  * byte2  X15   X14   X13   X12   X11   X10   X9    X8
  * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
@@ -134,7 +134,7 @@
  * (returned as Report 5 - macrokeys from the mouse)
  *
  *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
- * byte0   0     0     0     0     0     1     0     0
+ * byte0   0     0     0     0     0     1     0     1
  * byte1   0     0     0    BS2   BS    Tip   IR    DV
  * byte2   0     0     0     0     0     0     1     0
  * byte3   0     0     0    K4    K3    K2    K1    K0
@@ -218,15 +218,9 @@
 #define AIPTEK_WHEEL_DISABLE				(-10101)
 
 	/* ToolCode values, which BTW are 0x140 .. 0x14f
-	 * We have things set up such that if TOOL_BUTTON_FIRED_BIT is
-	 * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx.
-	 *
-	 * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will
-	 * get reset.
+	 * We have things set up such that if the tool button has changed,
+	 * the tools get reset.
 	 */
-#define TOOL_BUTTON(x)					((x) & 0x14f)
-#define TOOL_BUTTON_FIRED(x)				((x) & 0x200)
-#define TOOL_BUTTON_FIRED_BIT				0x200
 	/* toolMode codes
 	 */
 #define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
@@ -264,9 +258,9 @@
 
 	/* Mouse button programming
 	 */
-#define AIPTEK_MOUSE_LEFT_BUTTON		0x01
-#define AIPTEK_MOUSE_RIGHT_BUTTON		0x02
-#define AIPTEK_MOUSE_MIDDLE_BUTTON		0x04
+#define AIPTEK_MOUSE_LEFT_BUTTON		0x04
+#define AIPTEK_MOUSE_RIGHT_BUTTON		0x08
+#define AIPTEK_MOUSE_MIDDLE_BUTTON		0x10
 
 	/* Stylus button programming
 	 */
@@ -294,7 +288,6 @@ struct aiptek_features {
 	int modelCode;		/* Tablet model code (not unique) */
 	int firmwareCode;	/* prom/eeprom version            */
 	char usbPath[64 + 1];	/* device's physical usb path     */
-	char inputPath[64 + 1];	/* input device path              */
 };
 
 struct aiptek_settings {
@@ -327,9 +320,32 @@ struct aiptek {
 	int inDelay;				/* jitter: in jitter delay?      */
 	unsigned long endDelay;			/* jitter: time when delay ends  */
 	int previousJitterable;			/* jitterable prev value     */
+
+	int lastMacro;				/* macro key to reset            */
+	int previousToolMode;			/* pen, pencil, brush, etc. tool */
 	unsigned char *data;			/* incoming packet data          */
 };
 
+static const int eventTypes[] = {
+        EV_KEY, EV_ABS, EV_REL, EV_MSC,
+};
+
+static const int absEvents[] = {
+        ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y,
+        ABS_WHEEL, ABS_MISC,
+};
+
+static const int relEvents[] = {
+        REL_X, REL_Y, REL_WHEEL,
+};
+
+static const int buttonEvents[] = {
+	BTN_LEFT, BTN_RIGHT, BTN_MIDDLE,
+	BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH,
+	BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH,
+	BTN_STYLUS, BTN_STYLUS2,
+};
+
 /*
  * Permit easy lookup of keyboard events to send, versus
  * the bitmap which comes from the tablet. This hides the
@@ -345,23 +361,39 @@ static const int macroKeyEvents[] = {
 };
 
 /***********************************************************************
- * Relative reports deliver values in 2's complement format to
- * deal with negative offsets.
+ * Map values to strings and back. Every map shoudl have the following
+ * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
  */
-static int aiptek_convert_from_2s_complement(unsigned char c)
+#define AIPTEK_INVALID_VALUE	-1
+
+struct aiptek_map {
+	const char *string;
+	int value;
+};
+
+static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count)
 {
-	int ret;
-	unsigned char b = c;
-	int negate = 0;
+	const struct aiptek_map *p;
 
-	if ((b & 0x80) != 0) {
-		b = ~b;
-		b--;
-		negate = 1;
-	}
-	ret = b;
-	ret = (negate == 1) ? -ret : ret;
-	return ret;
+	if (str[count - 1] == '\n')
+		count--;
+
+	for (p = map; p->string; p++)
+	        if (!strncmp(str, p->string, count))
+			return p->value;
+
+	return AIPTEK_INVALID_VALUE;
+}
+
+static const char *map_val_to_str(const struct aiptek_map *map, int val)
+{
+	const struct aiptek_map *p;
+
+	for (p = map; p->value != AIPTEK_INVALID_VALUE; p++)
+		if (val == p->value)
+			return p->string;
+
+	return "unknown";
 }
 
 /***********************************************************************
@@ -385,6 +417,9 @@ static int aiptek_convert_from_2s_complement(unsigned char c)
  * Proximity. Why two events? I thought it interesting to know if the
  * Proximity event occurred while the tablet was in absolute or relative
  * mode.
+ * Update: REL_MISC proved not to be such a good idea. With REL_MISC you
+ * get an event transmitted each time. ABS_MISC works better, since it
+ * can be set and re-set. Thus, only using ABS_MISC from now on.
  *
  * Other tablets use the notion of a certain minimum stylus pressure
  * to infer proximity. While that could have been done, that is yet
@@ -441,8 +476,8 @@ static void aiptek_irq(struct urb *urb)
 			aiptek->diagnostic =
 			    AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
 		} else {
-			x = aiptek_convert_from_2s_complement(data[2]);
-			y = aiptek_convert_from_2s_complement(data[3]);
+			x = (signed char) data[2];
+			y = (signed char) data[3];
 
 			/* jitterable keeps track of whether any button has been pressed.
 			 * We're also using it to remap the physical mouse button mask
@@ -451,18 +486,20 @@ static void aiptek_irq(struct urb *urb)
 			 * that a non-zero value indicates that one or more
 			 * mouse button was pressed.)
 			 */
-			jitterable = data[5] & 0x07;
+			jitterable = data[1] & 0x07;
 
-			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
-			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
-			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+			left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0;
+			right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0;
+			middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0;
 
 			input_report_key(inputdev, BTN_LEFT, left);
 			input_report_key(inputdev, BTN_MIDDLE, middle);
 			input_report_key(inputdev, BTN_RIGHT, right);
+
+			input_report_abs(inputdev, ABS_MISC,
+					 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
 			input_report_rel(inputdev, REL_X, x);
 			input_report_rel(inputdev, REL_Y, y);
-			input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
 
 			/* Wheel support is in the form of a single-event
 			 * firing.
@@ -472,6 +509,11 @@ static void aiptek_irq(struct urb *urb)
 						 aiptek->curSetting.wheel);
 				aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
 			}
+			if (aiptek->lastMacro != -1) {
+			        input_report_key(inputdev,
+						 macroKeyEvents[aiptek->lastMacro], 0);
+				aiptek->lastMacro = -1;
+			}
 			input_sync(inputdev);
 		}
 	}
@@ -489,8 +531,8 @@ static void aiptek_irq(struct urb *urb)
 			y = le16_to_cpu(get_unaligned((__le16 *) (data + 3)));
 			z = le16_to_cpu(get_unaligned((__le16 *) (data + 6)));
 
-			p = (data[5] & 0x01) != 0 ? 1 : 0;
-			dv = (data[5] & 0x02) != 0 ? 1 : 0;
+			dv = (data[5] & 0x01) != 0 ? 1 : 0;
+			p = (data[5] & 0x02) != 0 ? 1 : 0;
 			tip = (data[5] & 0x04) != 0 ? 1 : 0;
 
 			/* Use jitterable to re-arrange button masks
@@ -505,16 +547,18 @@ static void aiptek_irq(struct urb *urb)
 			 * all 'bad' reports...
 			 */
 			if (dv != 0) {
-				/* If we've not already sent a tool_button_?? code, do
-				 * so now. Then set FIRED_BIT so it won't be resent unless
-				 * the user forces FIRED_BIT off.
+				/* If the selected tool changed, reset the old
+				 * tool key, and set the new one.
 				 */
-				if (TOOL_BUTTON_FIRED
-				    (aiptek->curSetting.toolMode) == 0) {
+				if (aiptek->previousToolMode !=
+				    aiptek->curSetting.toolMode) {
+				        input_report_key(inputdev,
+							 aiptek->previousToolMode, 0);
 					input_report_key(inputdev,
-							 TOOL_BUTTON(aiptek->curSetting.toolMode),
+							 aiptek->curSetting.toolMode,
 							 1);
-					aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+					aiptek->previousToolMode =
+					          aiptek->curSetting.toolMode;
 				}
 
 				if (p != 0) {
@@ -550,6 +594,11 @@ static void aiptek_irq(struct urb *urb)
 					}
 				}
 				input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
+				if (aiptek->lastMacro != -1) {
+			                input_report_key(inputdev,
+							 macroKeyEvents[aiptek->lastMacro], 0);
+					aiptek->lastMacro = -1;
+				}
 				input_sync(inputdev);
 			}
 		}
@@ -568,23 +617,25 @@ static void aiptek_irq(struct urb *urb)
 
 			jitterable = data[5] & 0x1c;
 
-			p = (data[5] & 0x01) != 0 ? 1 : 0;
-			dv = (data[5] & 0x02) != 0 ? 1 : 0;
+			dv = (data[5] & 0x01) != 0 ? 1 : 0;
+			p = (data[5] & 0x02) != 0 ? 1 : 0;
 			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
 			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
 			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
 
 			if (dv != 0) {
-				/* If we've not already sent a tool_button_?? code, do
-				 * so now. Then set FIRED_BIT so it won't be resent unless
-				 * the user forces FIRED_BIT off.
+				/* If the selected tool changed, reset the old
+				 * tool key, and set the new one.
 				 */
-				if (TOOL_BUTTON_FIRED
-				    (aiptek->curSetting.toolMode) == 0) {
+				if (aiptek->previousToolMode !=
+				    aiptek->curSetting.toolMode) {
+				        input_report_key(inputdev,
+							 aiptek->previousToolMode, 0);
 					input_report_key(inputdev,
-							 TOOL_BUTTON(aiptek->curSetting.toolMode),
+							 aiptek->curSetting.toolMode,
 							 1);
-					aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+					aiptek->previousToolMode =
+					          aiptek->curSetting.toolMode;
 				}
 
 				if (p != 0) {
@@ -605,7 +656,12 @@ static void aiptek_irq(struct urb *urb)
 						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
 					}
 				}
-				input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+				input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+				if (aiptek->lastMacro != -1) {
+			                input_report_key(inputdev,
+							 macroKeyEvents[aiptek->lastMacro], 0);
+				        aiptek->lastMacro = -1;
+				}
 				input_sync(inputdev);
 			}
 		}
@@ -615,98 +671,83 @@ static void aiptek_irq(struct urb *urb)
 	else if (data[0] == 4) {
 		jitterable = data[1] & 0x18;
 
-		p = (data[1] & 0x01) != 0 ? 1 : 0;
-		dv = (data[1] & 0x02) != 0 ? 1 : 0;
+		dv = (data[1] & 0x01) != 0 ? 1 : 0;
+		p = (data[1] & 0x02) != 0 ? 1 : 0;
 		tip = (data[1] & 0x04) != 0 ? 1 : 0;
 		bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
 		pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
 
-		macro = data[3];
+		macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1;
 		z = le16_to_cpu(get_unaligned((__le16 *) (data + 4)));
 
-		if (dv != 0) {
-			/* If we've not already sent a tool_button_?? code, do
-			 * so now. Then set FIRED_BIT so it won't be resent unless
-			 * the user forces FIRED_BIT off.
+		if (dv) {
+		        /* If the selected tool changed, reset the old
+			 * tool key, and set the new one.
 			 */
-			if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+		        if (aiptek->previousToolMode !=
+			    aiptek->curSetting.toolMode) {
+			        input_report_key(inputdev,
+						 aiptek->previousToolMode, 0);
 				input_report_key(inputdev,
-						 TOOL_BUTTON(aiptek->curSetting.toolMode),
+						 aiptek->curSetting.toolMode,
 						 1);
-				aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+				aiptek->previousToolMode =
+				        aiptek->curSetting.toolMode;
 			}
+		}
 
-			if (p != 0) {
-				input_report_key(inputdev, BTN_TOUCH, tip);
-				input_report_key(inputdev, BTN_STYLUS, bs);
-				input_report_key(inputdev, BTN_STYLUS2, pck);
-				input_report_abs(inputdev, ABS_PRESSURE, z);
-			}
+		if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+		        input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+			aiptek->lastMacro = -1;
+		}
 
-			/* For safety, we're sending key 'break' codes for the
-			 * neighboring macro keys.
-			 */
-			if (macro > 0) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro - 1], 0);
-			}
-			if (macro < 25) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro + 1], 0);
-			}
-			input_report_key(inputdev, macroKeyEvents[macro], p);
-			input_report_abs(inputdev, ABS_MISC,
-					 p | AIPTEK_REPORT_TOOL_STYLUS);
-			input_sync(inputdev);
+		if (macro != -1 && macro != aiptek->lastMacro) {
+			input_report_key(inputdev, macroKeyEvents[macro], 1);
+			aiptek->lastMacro = macro;
 		}
+		input_report_abs(inputdev, ABS_MISC,
+				 p | AIPTEK_REPORT_TOOL_STYLUS);
+		input_sync(inputdev);
 	}
 	/* Report 5s come from the macro keys when pressed by mouse
 	 */
 	else if (data[0] == 5) {
 		jitterable = data[1] & 0x1c;
 
-		p = (data[1] & 0x01) != 0 ? 1 : 0;
-		dv = (data[1] & 0x02) != 0 ? 1 : 0;
+		dv = (data[1] & 0x01) != 0 ? 1 : 0;
+		p = (data[1] & 0x02) != 0 ? 1 : 0;
 		left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
 		right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
 		middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
-		macro = data[3];
+		macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0;
 
-		if (dv != 0) {
-			/* If we've not already sent a tool_button_?? code, do
-			 * so now. Then set FIRED_BIT so it won't be resent unless
-			 * the user forces FIRED_BIT off.
+		if (dv) {
+		        /* If the selected tool changed, reset the old
+			 * tool key, and set the new one.
 			 */
-			if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
-				input_report_key(inputdev,
-						 TOOL_BUTTON(aiptek->curSetting.toolMode),
-						 1);
-				aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
-			}
-
-			if (p != 0) {
-				input_report_key(inputdev, BTN_LEFT, left);
-				input_report_key(inputdev, BTN_MIDDLE, middle);
-				input_report_key(inputdev, BTN_RIGHT, right);
+		        if (aiptek->previousToolMode !=
+			    aiptek->curSetting.toolMode) {
+		                input_report_key(inputdev,
+						 aiptek->previousToolMode, 0);
+			        input_report_key(inputdev,
+						 aiptek->curSetting.toolMode, 1);
+			        aiptek->previousToolMode = aiptek->curSetting.toolMode;
 			}
+		}
 
-			/* For safety, we're sending key 'break' codes for the
-			 * neighboring macro keys.
-			 */
-			if (macro > 0) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro - 1], 0);
-			}
-			if (macro < 25) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro + 1], 0);
-			}
+		if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+		        input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+			aiptek->lastMacro = -1;
+		}
 
+		if (macro != -1 && macro != aiptek->lastMacro) {
 			input_report_key(inputdev, macroKeyEvents[macro], 1);
-			input_report_rel(inputdev, ABS_MISC,
-					 p | AIPTEK_REPORT_TOOL_MOUSE);
-			input_sync(inputdev);
+			aiptek->lastMacro = macro;
 		}
+
+		input_report_abs(inputdev, ABS_MISC,
+				 p | AIPTEK_REPORT_TOOL_MOUSE);
+		input_sync(inputdev);
 	}
 	/* We have no idea which tool can generate a report 6. Theoretically,
 	 * neither need to, having been given reports 4 & 5 for such use.
@@ -725,15 +766,18 @@ static void aiptek_irq(struct urb *urb)
 					 0);
 		}
 
-		/* If we've not already sent a tool_button_?? code, do
-		 * so now. Then set FIRED_BIT so it won't be resent unless
-		 * the user forces FIRED_BIT off.
-		 */
-		if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+		/* If the selected tool changed, reset the old
+		   tool key, and set the new one.
+		*/
+		if (aiptek->previousToolMode !=
+		    aiptek->curSetting.toolMode) {
+		        input_report_key(inputdev,
+					 aiptek->previousToolMode, 0);
 			input_report_key(inputdev,
-					 TOOL_BUTTON(aiptek->curSetting.
-						     toolMode), 1);
-			aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+					 aiptek->curSetting.toolMode,
+					 1);
+			aiptek->previousToolMode =
+				aiptek->curSetting.toolMode;
 		}
 
 		input_report_key(inputdev, macroKeyEvents[macro], 1);
@@ -1007,9 +1051,6 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	return snprintf(buf, PAGE_SIZE, "%dx%d\n",
 			aiptek->inputdev->absmax[ABS_X] + 1,
 			aiptek->inputdev->absmax[ABS_Y] + 1);
@@ -1024,117 +1065,35 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr
 static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
 
 /***********************************************************************
- * support routines for the 'product_id' file
- */
-static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
-			aiptek->inputdev->id.product);
-}
-
-static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL);
-
-/***********************************************************************
- * support routines for the 'vendor_id' file
- */
-static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor);
-}
-
-static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL);
-
-/***********************************************************************
- * support routines for the 'vendor' file
- */
-static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	int retval;
-
-	if (aiptek == NULL)
-		return 0;
-
-	retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer);
-	return retval;
-}
-
-static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL);
-
-/***********************************************************************
- * support routines for the 'product' file
- */
-static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	int retval;
-
-	if (aiptek == NULL)
-		return 0;
-
-	retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product);
-	return retval;
-}
-
-static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL);
-
-/***********************************************************************
  * support routines for the 'pointer_mode' file. Note that this file
  * both displays current setting and allows reprogramming.
  */
+static struct aiptek_map pointer_mode_map[] = {
+	{ "stylus",	AIPTEK_POINTER_ONLY_STYLUS_MODE },
+	{ "mouse",	AIPTEK_POINTER_ONLY_MOUSE_MODE },
+	{ "either",	AIPTEK_POINTER_EITHER_MODE },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
 static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.pointerMode) {
-	case AIPTEK_POINTER_ONLY_STYLUS_MODE:
-		s = "stylus";
-		break;
-
-	case AIPTEK_POINTER_ONLY_MOUSE_MODE:
-		s = "mouse";
-		break;
-
-	case AIPTEK_POINTER_EITHER_MODE:
-		s = "either";
-		break;
 
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(pointer_mode_map,
+					aiptek->curSetting.pointerMode));
 }
 
 static ssize_t
 store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	if (aiptek == NULL)
-		return 0;
+	int new_mode = map_str_to_val(pointer_mode_map, buf, count);
 
-	if (strcmp(buf, "stylus") == 0) {
-		aiptek->newSetting.pointerMode =
-		    AIPTEK_POINTER_ONLY_STYLUS_MODE;
-	} else if (strcmp(buf, "mouse") == 0) {
-		aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE;
-	} else if (strcmp(buf, "either") == 0) {
-		aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
-	}
+	if (new_mode == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.pointerMode = new_mode;
 	return count;
 }
 
@@ -1146,44 +1105,32 @@ static DEVICE_ATTR(pointer_mode,
  * support routines for the 'coordinate_mode' file. Note that this file
  * both displays current setting and allows reprogramming.
  */
+
+static struct aiptek_map coordinate_mode_map[] = {
+	{ "absolute",	AIPTEK_COORDINATE_ABSOLUTE_MODE },
+	{ "relative",	AIPTEK_COORDINATE_RELATIVE_MODE },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
 static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
 
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.coordinateMode) {
-	case AIPTEK_COORDINATE_ABSOLUTE_MODE:
-		s = "absolute";
-		break;
-
-	case AIPTEK_COORDINATE_RELATIVE_MODE:
-		s = "relative";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(coordinate_mode_map,
+					aiptek->curSetting.coordinateMode));
 }
 
 static ssize_t
 store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	if (aiptek == NULL)
-		return 0;
+	int new_mode = map_str_to_val(coordinate_mode_map, buf, count);
 
-	if (strcmp(buf, "absolute") == 0) {
-		aiptek->newSetting.pointerMode =
-		    AIPTEK_COORDINATE_ABSOLUTE_MODE;
-	} else if (strcmp(buf, "relative") == 0) {
-		aiptek->newSetting.pointerMode =
-		    AIPTEK_COORDINATE_RELATIVE_MODE;
-	}
+	if (new_mode == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
+
+	aiptek->newSetting.coordinateMode = new_mode;
 	return count;
 }
 
@@ -1195,73 +1142,37 @@ static DEVICE_ATTR(coordinate_mode,
  * support routines for the 'tool_mode' file. Note that this file
  * both displays current setting and allows reprogramming.
  */
+
+static struct aiptek_map tool_mode_map[] = {
+	{ "mouse",	AIPTEK_TOOL_BUTTON_MOUSE_MODE },
+	{ "eraser",	AIPTEK_TOOL_BUTTON_ERASER_MODE },
+	{ "pencil",	AIPTEK_TOOL_BUTTON_PENCIL_MODE },
+	{ "pen",	AIPTEK_TOOL_BUTTON_PEN_MODE },
+	{ "brush",	AIPTEK_TOOL_BUTTON_BRUSH_MODE },
+	{ "airbrush",	AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE },
+	{ "lens",	AIPTEK_TOOL_BUTTON_LENS_MODE },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
 static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) {
-	case AIPTEK_TOOL_BUTTON_MOUSE_MODE:
-		s = "mouse";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_ERASER_MODE:
-		s = "eraser";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_PENCIL_MODE:
-		s = "pencil";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_PEN_MODE:
-		s = "pen";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_BRUSH_MODE:
-		s = "brush";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE:
-		s = "airbrush";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_LENS_MODE:
-		s = "lens";
-		break;
 
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(tool_mode_map,
+					aiptek->curSetting.toolMode));
 }
 
 static ssize_t
 store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	if (aiptek == NULL)
-		return 0;
+	int new_mode = map_str_to_val(tool_mode_map, buf, count);
 
-	if (strcmp(buf, "mouse") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE;
-	} else if (strcmp(buf, "eraser") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE;
-	} else if (strcmp(buf, "pencil") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE;
-	} else if (strcmp(buf, "pen") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
-	} else if (strcmp(buf, "brush") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE;
-	} else if (strcmp(buf, "airbrush") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE;
-	} else if (strcmp(buf, "lens") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE;
-	}
+	if (new_mode == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
 
+	aiptek->newSetting.toolMode = new_mode;
 	return count;
 }
 
@@ -1277,9 +1188,6 @@ static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *att
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
 		return snprintf(buf, PAGE_SIZE, "disable\n");
 	} else {
@@ -1294,9 +1202,6 @@ store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 	int x;
 
-	if (aiptek == NULL)
-		return 0;
-
 	if (strcmp(buf, "disable") == 0) {
 		aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
 	} else {
@@ -1319,9 +1224,6 @@ static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *att
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
 		return snprintf(buf, PAGE_SIZE, "disable\n");
 	} else {
@@ -1336,9 +1238,6 @@ store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 	int y;
 
-	if (aiptek == NULL)
-		return 0;
-
 	if (strcmp(buf, "disable") == 0) {
 		aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
 	} else {
@@ -1361,9 +1260,6 @@ static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribut
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay);
 }
 
@@ -1372,9 +1268,6 @@ store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10);
 	return count;
 }
@@ -1391,9 +1284,6 @@ static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_at
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	return snprintf(buf, PAGE_SIZE, "%d\n",
 			aiptek->curSetting.programmableDelay);
 }
@@ -1403,9 +1293,6 @@ store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr,
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10);
 	return count;
 }
@@ -1415,23 +1302,6 @@ static DEVICE_ATTR(delay,
 		   show_tabletProgrammableDelay, store_tabletProgrammableDelay);
 
 /***********************************************************************
- * support routines for the 'input_path' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n",
-			aiptek->features.inputPath);
-}
-
-static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL);
-
-/***********************************************************************
  * support routines for the 'event_count' file. Note that this file
  * only displays current setting.
  */
@@ -1439,9 +1309,6 @@ static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attri
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount);
 }
 
@@ -1456,9 +1323,6 @@ static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_at
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 	char *retMsg;
 
-	if (aiptek == NULL)
-		return 0;
-
 	switch (aiptek->diagnostic) {
 	case AIPTEK_DIAGNOSTIC_NA:
 		retMsg = "no errors\n";
@@ -1493,45 +1357,32 @@ static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL);
  * support routines for the 'stylus_upper' file. Note that this file
  * both displays current setting and allows for setting changing.
  */
+
+static struct aiptek_map stylus_button_map[] = {
+	{ "upper",	AIPTEK_STYLUS_UPPER_BUTTON },
+	{ "lower",	AIPTEK_STYLUS_LOWER_BUTTON },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
 static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.stylusButtonUpper) {
-	case AIPTEK_STYLUS_UPPER_BUTTON:
-		s = "upper";
-		break;
-
-	case AIPTEK_STYLUS_LOWER_BUTTON:
-		s = "lower";
-		break;
 
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(stylus_button_map,
+					aiptek->curSetting.stylusButtonUpper));
 }
 
 static ssize_t
 store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(stylus_button_map, buf, count);
 
-	if (aiptek == NULL)
-		return 0;
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
 
-	if (strcmp(buf, "upper") == 0) {
-		aiptek->newSetting.stylusButtonUpper =
-		    AIPTEK_STYLUS_UPPER_BUTTON;
-	} else if (strcmp(buf, "lower") == 0) {
-		aiptek->newSetting.stylusButtonUpper =
-		    AIPTEK_STYLUS_LOWER_BUTTON;
-	}
+	aiptek->newSetting.stylusButtonUpper = new_button;
 	return count;
 }
 
@@ -1543,45 +1394,26 @@ static DEVICE_ATTR(stylus_upper,
  * support routines for the 'stylus_lower' file. Note that this file
  * both displays current setting and allows for setting changing.
  */
+
 static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.stylusButtonLower) {
-	case AIPTEK_STYLUS_UPPER_BUTTON:
-		s = "upper";
-		break;
-
-	case AIPTEK_STYLUS_LOWER_BUTTON:
-		s = "lower";
-		break;
 
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(stylus_button_map,
+					aiptek->curSetting.stylusButtonLower));
 }
 
 static ssize_t
 store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(stylus_button_map, buf, count);
 
-	if (aiptek == NULL)
-		return 0;
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
 
-	if (strcmp(buf, "upper") == 0) {
-		aiptek->newSetting.stylusButtonLower =
-		    AIPTEK_STYLUS_UPPER_BUTTON;
-	} else if (strcmp(buf, "lower") == 0) {
-		aiptek->newSetting.stylusButtonLower =
-		    AIPTEK_STYLUS_LOWER_BUTTON;
-	}
+	aiptek->newSetting.stylusButtonLower = new_button;
 	return count;
 }
 
@@ -1593,49 +1425,33 @@ static DEVICE_ATTR(stylus_lower,
  * support routines for the 'mouse_left' file. Note that this file
  * both displays current setting and allows for setting changing.
  */
+
+static struct aiptek_map mouse_button_map[] = {
+	{ "left",	AIPTEK_MOUSE_LEFT_BUTTON },
+	{ "middle",	AIPTEK_MOUSE_MIDDLE_BUTTON },
+	{ "right",	AIPTEK_MOUSE_RIGHT_BUTTON },
+	{ NULL,		AIPTEK_INVALID_VALUE }
+};
+
 static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.mouseButtonLeft) {
-	case AIPTEK_MOUSE_LEFT_BUTTON:
-		s = "left";
-		break;
-
-	case AIPTEK_MOUSE_MIDDLE_BUTTON:
-		s = "middle";
-		break;
-
-	case AIPTEK_MOUSE_RIGHT_BUTTON:
-		s = "right";
-		break;
 
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(mouse_button_map,
+					aiptek->curSetting.mouseButtonLeft));
 }
 
 static ssize_t
 store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(mouse_button_map, buf, count);
 
-	if (aiptek == NULL)
-		return 0;
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
 
-	if (strcmp(buf, "left") == 0) {
-		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
-	} else if (strcmp(buf, "middle") == 0) {
-		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON;
-	} else if (strcmp(buf, "right") == 0) {
-		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON;
-	}
+	aiptek->newSetting.mouseButtonLeft = new_button;
 	return count;
 }
 
@@ -1650,48 +1466,22 @@ static DEVICE_ATTR(mouse_left,
 static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
 
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.mouseButtonMiddle) {
-	case AIPTEK_MOUSE_LEFT_BUTTON:
-		s = "left";
-		break;
-
-	case AIPTEK_MOUSE_MIDDLE_BUTTON:
-		s = "middle";
-		break;
-
-	case AIPTEK_MOUSE_RIGHT_BUTTON:
-		s = "right";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(mouse_button_map,
+					aiptek->curSetting.mouseButtonMiddle));
 }
 
 static ssize_t
 store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(mouse_button_map, buf, count);
 
-	if (aiptek == NULL)
-		return 0;
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
 
-	if (strcmp(buf, "left") == 0) {
-		aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON;
-	} else if (strcmp(buf, "middle") == 0) {
-		aiptek->newSetting.mouseButtonMiddle =
-		    AIPTEK_MOUSE_MIDDLE_BUTTON;
-	} else if (strcmp(buf, "right") == 0) {
-		aiptek->newSetting.mouseButtonMiddle =
-		    AIPTEK_MOUSE_RIGHT_BUTTON;
-	}
+	aiptek->newSetting.mouseButtonMiddle = new_button;
 	return count;
 }
 
@@ -1706,47 +1496,22 @@ static DEVICE_ATTR(mouse_middle,
 static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.mouseButtonRight) {
-	case AIPTEK_MOUSE_LEFT_BUTTON:
-		s = "left";
-		break;
-
-	case AIPTEK_MOUSE_MIDDLE_BUTTON:
-		s = "middle";
-		break;
 
-	case AIPTEK_MOUSE_RIGHT_BUTTON:
-		s = "right";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			map_val_to_str(mouse_button_map,
+					aiptek->curSetting.mouseButtonRight));
 }
 
 static ssize_t
 store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int new_button = map_str_to_val(mouse_button_map, buf, count);
 
-	if (aiptek == NULL)
-		return 0;
+	if (new_button == AIPTEK_INVALID_VALUE)
+		return -EINVAL;
 
-	if (strcmp(buf, "left") == 0) {
-		aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON;
-	} else if (strcmp(buf, "middle") == 0) {
-		aiptek->newSetting.mouseButtonRight =
-		    AIPTEK_MOUSE_MIDDLE_BUTTON;
-	} else if (strcmp(buf, "right") == 0) {
-		aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
-	}
+	aiptek->newSetting.mouseButtonRight = new_button;
 	return count;
 }
 
@@ -1762,9 +1527,6 @@ static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *att
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
 		return snprintf(buf, PAGE_SIZE, "disable\n");
 	} else {
@@ -1778,9 +1540,6 @@ store_tabletWheel(struct device *dev, struct device_attribute *attr, const char
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10);
 	return count;
 }
@@ -1794,11 +1553,6 @@ static DEVICE_ATTR(wheel,
  */
 static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
 	/* There is nothing useful to display, so a one-line manual
 	 * is in order...
 	 */
@@ -1811,9 +1565,6 @@ store_tabletExecute(struct device *dev, struct device_attribute *attr, const cha
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	/* We do not care what you write to this file. Merely the action
 	 * of writing to this file triggers a tablet reprogramming.
 	 */
@@ -1837,9 +1588,6 @@ static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *a
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode);
 }
 
@@ -1853,9 +1601,6 @@ static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode);
 }
 
@@ -1869,86 +1614,39 @@ static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *at
 {
 	struct aiptek *aiptek = dev_get_drvdata(dev);
 
-	if (aiptek == NULL)
-		return 0;
-
 	return snprintf(buf, PAGE_SIZE, "%04x\n",
 			aiptek->features.firmwareCode);
 }
 
 static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
 
-/***********************************************************************
- * This routine removes all existing sysfs files managed by this device
- * driver.
- */
-static void aiptek_delete_files(struct device *dev)
-{
-	device_remove_file(dev, &dev_attr_size);
-	device_remove_file(dev, &dev_attr_product_id);
-	device_remove_file(dev, &dev_attr_vendor_id);
-	device_remove_file(dev, &dev_attr_vendor);
-	device_remove_file(dev, &dev_attr_product);
-	device_remove_file(dev, &dev_attr_pointer_mode);
-	device_remove_file(dev, &dev_attr_coordinate_mode);
-	device_remove_file(dev, &dev_attr_tool_mode);
-	device_remove_file(dev, &dev_attr_xtilt);
-	device_remove_file(dev, &dev_attr_ytilt);
-	device_remove_file(dev, &dev_attr_jitter);
-	device_remove_file(dev, &dev_attr_delay);
-	device_remove_file(dev, &dev_attr_input_path);
-	device_remove_file(dev, &dev_attr_event_count);
-	device_remove_file(dev, &dev_attr_diagnostic);
-	device_remove_file(dev, &dev_attr_odm_code);
-	device_remove_file(dev, &dev_attr_model_code);
-	device_remove_file(dev, &dev_attr_firmware_code);
-	device_remove_file(dev, &dev_attr_stylus_lower);
-	device_remove_file(dev, &dev_attr_stylus_upper);
-	device_remove_file(dev, &dev_attr_mouse_left);
-	device_remove_file(dev, &dev_attr_mouse_middle);
-	device_remove_file(dev, &dev_attr_mouse_right);
-	device_remove_file(dev, &dev_attr_wheel);
-	device_remove_file(dev, &dev_attr_execute);
-}
-
-/***********************************************************************
- * This routine creates the sysfs files managed by this device
- * driver.
- */
-static int aiptek_add_files(struct device *dev)
-{
-	int ret;
+static struct attribute *aiptek_attributes[] = {
+	&dev_attr_size.attr,
+	&dev_attr_pointer_mode.attr,
+	&dev_attr_coordinate_mode.attr,
+	&dev_attr_tool_mode.attr,
+	&dev_attr_xtilt.attr,
+	&dev_attr_ytilt.attr,
+	&dev_attr_jitter.attr,
+	&dev_attr_delay.attr,
+	&dev_attr_event_count.attr,
+	&dev_attr_diagnostic.attr,
+	&dev_attr_odm_code.attr,
+	&dev_attr_model_code.attr,
+	&dev_attr_firmware_code.attr,
+	&dev_attr_stylus_lower.attr,
+	&dev_attr_stylus_upper.attr,
+	&dev_attr_mouse_left.attr,
+	&dev_attr_mouse_middle.attr,
+	&dev_attr_mouse_right.attr,
+	&dev_attr_wheel.attr,
+	&dev_attr_execute.attr,
+	NULL
+};
 
-	if ((ret = device_create_file(dev, &dev_attr_size)) ||
-	    (ret = device_create_file(dev, &dev_attr_product_id)) ||
-	    (ret = device_create_file(dev, &dev_attr_vendor_id)) ||
-	    (ret = device_create_file(dev, &dev_attr_vendor)) ||
-	    (ret = device_create_file(dev, &dev_attr_product)) ||
-	    (ret = device_create_file(dev, &dev_attr_pointer_mode)) ||
-	    (ret = device_create_file(dev, &dev_attr_coordinate_mode)) ||
-	    (ret = device_create_file(dev, &dev_attr_tool_mode)) ||
-	    (ret = device_create_file(dev, &dev_attr_xtilt)) ||
-	    (ret = device_create_file(dev, &dev_attr_ytilt)) ||
-	    (ret = device_create_file(dev, &dev_attr_jitter)) ||
-	    (ret = device_create_file(dev, &dev_attr_delay)) ||
-	    (ret = device_create_file(dev, &dev_attr_input_path)) ||
-	    (ret = device_create_file(dev, &dev_attr_event_count)) ||
-	    (ret = device_create_file(dev, &dev_attr_diagnostic)) ||
-	    (ret = device_create_file(dev, &dev_attr_odm_code)) ||
-	    (ret = device_create_file(dev, &dev_attr_model_code)) ||
-	    (ret = device_create_file(dev, &dev_attr_firmware_code)) ||
-	    (ret = device_create_file(dev, &dev_attr_stylus_lower)) ||
-	    (ret = device_create_file(dev, &dev_attr_stylus_upper)) ||
-	    (ret = device_create_file(dev, &dev_attr_mouse_left)) ||
-	    (ret = device_create_file(dev, &dev_attr_mouse_middle)) ||
-	    (ret = device_create_file(dev, &dev_attr_mouse_right)) ||
-	    (ret = device_create_file(dev, &dev_attr_wheel)) ||
-	    (ret = device_create_file(dev, &dev_attr_execute))) {
-		err("aiptek: killing own sysfs device files\n");
-		aiptek_delete_files(dev);
-	}
-	return ret;
-}
+static struct attribute_group aiptek_attribute_group = {
+	.attrs	= aiptek_attributes,
+};
 
 /***********************************************************************
  * This routine is called when a tablet has been identified. It basically
@@ -1961,8 +1659,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usb_endpoint_descriptor *endpoint;
 	struct aiptek *aiptek;
 	struct input_dev *inputdev;
-	struct input_handle *inputhandle;
-	struct list_head *node, *next;
 	int i;
 	int speeds[] = { 0,
 		AIPTEK_PROGRAMMABLE_DELAY_50,
@@ -1984,17 +1680,23 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
 	inputdev = input_allocate_device();
-	if (!aiptek || !inputdev)
+	if (!aiptek || !inputdev) {
+		warn("aiptek: cannot allocate memory or input device");
 		goto fail1;
+        }
 
 	aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
 					GFP_ATOMIC, &aiptek->data_dma);
-	if (!aiptek->data)
+        if (!aiptek->data) {
+		warn("aiptek: cannot allocate usb buffer");
 		goto fail1;
+	}
 
 	aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!aiptek->urb)
+	if (!aiptek->urb) {
+	        warn("aiptek: cannot allocate urb");
 		goto fail2;
+	}
 
 	aiptek->inputdev = inputdev;
 	aiptek->usbdev = usbdev;
@@ -2002,6 +1704,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	aiptek->inDelay = 0;
 	aiptek->endDelay = 0;
 	aiptek->previousJitterable = 0;
+	aiptek->lastMacro = -1;
 
 	/* Set up the curSettings struct. Said struct contains the current
 	 * programmable parameters. The newSetting struct contains changes
@@ -2054,36 +1757,23 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	/* Now program the capacities of the tablet, in terms of being
 	 * an input device.
 	 */
-	inputdev->evbit[0] |= BIT(EV_KEY)
-	    | BIT(EV_ABS)
-	    | BIT(EV_REL)
-	    | BIT(EV_MSC);
-
-	inputdev->absbit[0] |= BIT(ABS_MISC);
+	for (i = 0; i < ARRAY_SIZE(eventTypes); ++i)
+	        __set_bit(eventTypes[i], inputdev->evbit);
 
-	inputdev->relbit[0] |=
-	    (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC));
+	for (i = 0; i < ARRAY_SIZE(absEvents); ++i)
+	        __set_bit(absEvents[i], inputdev->absbit);
 
-	inputdev->keybit[LONG(BTN_LEFT)] |=
-	    (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE));
+	for (i = 0; i < ARRAY_SIZE(relEvents); ++i)
+	        __set_bit(relEvents[i], inputdev->relbit);
 
-	inputdev->keybit[LONG(BTN_DIGI)] |=
-	    (BIT(BTN_TOOL_PEN) |
-	     BIT(BTN_TOOL_RUBBER) |
-	     BIT(BTN_TOOL_PENCIL) |
-	     BIT(BTN_TOOL_AIRBRUSH) |
-	     BIT(BTN_TOOL_BRUSH) |
-	     BIT(BTN_TOOL_MOUSE) |
-	     BIT(BTN_TOOL_LENS) |
-	     BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2));
+	__set_bit(MSC_SERIAL, inputdev->mscbit);
 
-	inputdev->mscbit[0] = BIT(MSC_SERIAL);
+	/* Set up key and button codes */
+	for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i)
+		__set_bit(buttonEvents[i], inputdev->keybit);
 
-	/* Programming the tablet macro keys needs to be done with a for loop
-	 * as the keycodes are discontiguous.
-	 */
 	for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
-		set_bit(macroKeyEvents[i], inputdev->keybit);
+		__set_bit(macroKeyEvents[i], inputdev->keybit);
 
 	/*
 	 * Program the input device coordinate capacities. We do not yet
@@ -2134,25 +1824,11 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		}
 	}
 
-	/* Register the tablet as an Input Device
-	 */
-	err = input_register_device(aiptek->inputdev);
-	if (err)
+	/* Murphy says that some day someone will have a tablet that fails the
+	   above test. That's you, Frederic Rodrigo */
+	if (i == ARRAY_SIZE(speeds)) {
+		info("input: Aiptek tried all speeds, no sane response");
 		goto fail2;
-
-	/* We now will look for the evdev device which is mapped to
-	 * the tablet. The partial name is kept in the link list of
-	 * input_handles associated with this input device.
-	 * What identifies an evdev input_handler is that it begins
-	 * with 'event', continues with a digit, and that in turn
-	 * is mapped to input/eventN.
-	 */
-	list_for_each_safe(node, next, &inputdev->h_list) {
-		inputhandle = to_handle(node);
-		if (strncmp(inputhandle->name, "event", 5) == 0) {
-			strcpy(aiptek->features.inputPath, inputhandle->name);
-			break;
-		}
 	}
 
 	/* Associate this driver's struct with the usb interface.
@@ -2161,18 +1837,27 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	/* Set up the sysfs files
 	 */
-	aiptek_add_files(&intf->dev);
+	err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group);
+	if (err) {
+		warn("aiptek: cannot create sysfs group err: %d", err);
+		goto fail3;
+        }
 
-	/* Make sure the evdev module is loaded. Assuming evdev IS a module :-)
+	/* Register the tablet as an Input Device
 	 */
-	if (request_module("evdev") != 0)
-		info("aiptek: error loading 'evdev' module");
-
+	err = input_register_device(aiptek->inputdev);
+	if (err) {
+		warn("aiptek: input_register_device returned err: %d", err);
+		goto fail4;
+        }
 	return 0;
 
+ fail4:	sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+ fail3: usb_free_urb(aiptek->urb);
  fail2:	usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
 			aiptek->data_dma);
- fail1:	input_free_device(inputdev);
+ fail1: usb_set_intfdata(intf, NULL);
+	input_free_device(inputdev);
 	kfree(aiptek);
 	return err;
 }
@@ -2192,7 +1877,7 @@ static void aiptek_disconnect(struct usb_interface *intf)
 		 */
 		usb_kill_urb(aiptek->urb);
 		input_unregister_device(aiptek->inputdev);
-		aiptek_delete_files(&intf->dev);
+		sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
 		usb_free_urb(aiptek->urb);
 		usb_buffer_free(interface_to_usbdev(intf),
 				AIPTEK_PACKET_LENGTH,
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index ef01a807ec0f..6542edb6f76e 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -11,7 +11,7 @@
  *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
  *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
  *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2006 Ping Cheng		<pingc@wacom.com>
+ *  Copyright (c) 2002-2007 Ping Cheng		<pingc@wacom.com>
  *
  *  ChangeLog:
  *      v0.1 (vp)  - Initial release
@@ -62,8 +62,9 @@
  *                 - Minor data report fix
  *      v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c,
  *		   - where wacom_sys.c deals with system specific code,
- * 		   - and wacom_wac.c deals with Wacom specific code
+ *		   - and wacom_wac.c deals with Wacom specific code
  *		   - Support Intuos3 4x6
+ *      v1.47 (pc) - Added support for Bamboo
  */
 
 /*
@@ -84,7 +85,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.46"
+#define DRIVER_VERSION "v1.47"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -123,6 +124,7 @@ extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wa
 extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern __u16 wacom_le16_to_cpu(unsigned char *data);
 extern __u16 wacom_be16_to_cpu(unsigned char *data);
 extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 83bddef66067..064e123c9b76 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -138,6 +138,12 @@ static void wacom_close(struct input_dev *dev)
 	usb_kill_urb(wacom->irq);
 }
 
+void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_1) | BIT(BTN_5);
+	input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
+}
+
 void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
 	input_dev->evbit[0] |= BIT(EV_MSC);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 7661f03a2db2..fc03ba256f4c 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -178,7 +178,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 
 			case 2: /* Mouse with wheel */
 				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
-				if (wacom->features->type == WACOM_G4) {
+				if (wacom->features->type == WACOM_G4 ||
+						wacom->features->type == WACOM_MO) {
 					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
 					wacom_report_rel(wcombo, REL_WHEEL, -rw);
 				} else
@@ -190,7 +191,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 				id = CURSOR_DEVICE_ID;
 				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
 				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
-				if (wacom->features->type == WACOM_G4)
+				if (wacom->features->type == WACOM_G4 ||
+						wacom->features->type == WACOM_MO)
 					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
 				else
 					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
@@ -226,7 +228,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 	}
 
 	/* send pad data */
-	if (wacom->features->type == WACOM_G4) {
+	switch (wacom->features->type) {
+	    case WACOM_G4:
 		if (data[7] & 0xf8) {
 			wacom_input_sync(wcombo); /* sync last event */
 			wacom->id[1] = 1;
@@ -247,6 +250,33 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_abs(wcombo, ABS_MISC, 0);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		}
+		break;
+	    case WACOM_MO:
+		if ((data[7] & 0xf8) || (data[8] & 0x80)) {
+			wacom_input_sync(wcombo); /* sync last event */
+			wacom->id[1] = 1;
+			wacom->serial[1] = (data[7] & 0xf8);
+			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
+			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
+			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
+			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
+			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
+			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+			wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+		} else if (wacom->id[1]) {
+			wacom_input_sync(wcombo); /* sync last event */
+			wacom->id[1] = 0;
+			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
+			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
+			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
+			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
+			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
+			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
+			wacom_report_abs(wcombo, ABS_MISC, 0);
+			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+		}
+		break;
 	}
 	return 1;
 }
@@ -331,7 +361,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_EXTRA, 0);
 			wacom_report_abs(wcombo, ABS_THROTTLE, 0);
 			wacom_report_abs(wcombo, ABS_RZ, 0);
- 		} else {
+		} else {
 			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
 			wacom_report_abs(wcombo, ABS_TILT_X, 0);
 			wacom_report_abs(wcombo, ABS_TILT_Y, 0);
@@ -423,9 +453,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
                 return result-1;
 
 	/* Only large I3 and I1 & I2 support Lense Cursor */
- 	if((wacom->tool[idx] == BTN_TOOL_LENS)
+	if ((wacom->tool[idx] == BTN_TOOL_LENS)
 			&& ((wacom->features->type == INTUOS3)
-		 	|| (wacom->features->type == INTUOS3S)))
+			|| (wacom->features->type == INTUOS3S)))
 		return 0;
 
 	/* Cintiq doesn't send data when RDY bit isn't set */
@@ -517,6 +547,7 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 			break;
 		case WACOM_G4:
 		case GRAPHIRE:
+		case WACOM_MO:
 			return (wacom_graphire_irq(wacom_wac, wcombo));
 			break;
 		case PTU:
@@ -538,6 +569,8 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
 {
 	switch (wacom_wac->features->type) {
+		case WACOM_MO:
+			input_dev_mo(input_dev, wacom_wac);
 		case WACOM_G4:
 			input_dev_g4(input_dev, wacom_wac);
 			/* fall through */
@@ -579,6 +612,7 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Volito2 4x5",   8,   5104,  3712,  511, 63, GRAPHIRE },
 	{ "Wacom Volito2 2x3",   8,   3248,  2320,  511, 63, GRAPHIRE },
 	{ "Wacom PenPartner2",   8,   3250,  2320,  255, 63, GRAPHIRE },
+	{ "Wacom Bamboo",        9,  14760,  9225,  511, 63, WACOM_MO },
 	{ "Wacom Intuos 4x5",   10,  12700, 10600, 1023, 31, INTUOS },
 	{ "Wacom Intuos 6x8",   10,  20320, 16240, 1023, 31, INTUOS },
 	{ "Wacom Intuos 9x12",  10,  30480, 24060, 1023, 31, INTUOS },
@@ -627,6 +661,7 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x65) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index a5e12e8756de..a302e229bb8a 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -25,6 +25,7 @@ enum {
 	INTUOS3,
 	INTUOS3L,
 	CINTIQ,
+	WACOM_MO,
 	MAX_TYPE
 };
 
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index e5cca9bd0406..69371779806a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -177,6 +177,7 @@ config TOUCHSCREEN_USB_COMPOSITE
 	  - some other eTurboTouch
 	  - Gunze AHL61
 	  - DMC TSC-10/25
+	  - IRTOUCHSYSTEMS/UNITOP
 
 	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 	  a usage description and the required user-space stuff.
@@ -219,4 +220,9 @@ config TOUCHSCREEN_USB_DMC_TSC10
 	bool "DMC TSC-10/25 device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
+config TOUCHSCREEN_USB_IRTOUCH
+	default y
+	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
 endif
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index e3f22852bd09..b407028ffc59 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -9,6 +9,7 @@
  *  - eTurboTouch
  *  - Gunze AHL61
  *  - DMC TSC-10/25
+ *  - IRTOUCHSYSTEMS/UNITOP
  *
  * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -110,6 +111,7 @@ enum {
 	DEVTYPE_ETURBO,
 	DEVTYPE_GUNZE,
 	DEVTYPE_DMC_TSC10,
+	DEVTYPE_IRTOUCH,
 };
 
 static struct usb_device_id usbtouch_devices[] = {
@@ -150,6 +152,11 @@ static struct usb_device_id usbtouch_devices[] = {
 	{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
 #endif
 
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+#endif
+
 	{}
 };
 
@@ -416,6 +423,21 @@ static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 
 
 /*****************************************************************************
+ * IRTOUCH Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = (pkt[3] << 8) | pkt[2];
+	dev->y = (pkt[5] << 8) | pkt[4];
+	dev->touch = (pkt[1] & 0x03) ? 1 : 0;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
  * the different device descriptors
  */
 static struct usbtouch_device_info usbtouch_dev_info[] = {
@@ -504,6 +526,17 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.read_data	= dmc_tsc10_read_data,
 	},
 #endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+	[DEVTYPE_IRTOUCH] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 8,
+		.read_data	= irtouch_read_data,
+	},
+#endif
 };
 
 
diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c
index 2db364898e15..d2f882e98e5e 100644
--- a/drivers/input/tsdev.c
+++ b/drivers/input/tsdev.c
@@ -109,9 +109,11 @@ struct tsdev {
 	int open;
 	int minor;
 	char name[8];
+	struct input_handle handle;
 	wait_queue_head_t wait;
 	struct list_head client_list;
-	struct input_handle handle;
+	struct device dev;
+
 	int x, y, pressure;
 	struct ts_calibration cal;
 };
@@ -163,9 +165,13 @@ static int tsdev_open(struct inode *inode, struct file *file)
 	if (!tsdev || !tsdev->exist)
 		return -ENODEV;
 
+	get_device(&tsdev->dev);
+
 	client = kzalloc(sizeof(struct tsdev_client), GFP_KERNEL);
-	if (!client)
-		return -ENOMEM;
+	if (!client) {
+		error = -ENOMEM;
+		goto err_put_tsdev;
+	}
 
 	client->tsdev = tsdev;
 	client->raw = (i >= TSDEV_MINORS / 2) ? 1 : 0;
@@ -173,19 +179,25 @@ static int tsdev_open(struct inode *inode, struct file *file)
 
 	if (!tsdev->open++ && tsdev->exist) {
 		error = input_open_device(&tsdev->handle);
-		if (error) {
-			list_del(&client->node);
-			kfree(client);
-			return error;
-		}
+		if (error)
+			goto err_free_client;
 	}
 
 	file->private_data = client;
 	return 0;
+
+ err_free_client:
+	list_del(&client->node);
+	kfree(client);
+ err_put_tsdev:
+	put_device(&tsdev->dev);
+	return error;
 }
 
-static void tsdev_free(struct tsdev *tsdev)
+static void tsdev_free(struct device *dev)
 {
+	struct tsdev *tsdev = container_of(dev, struct tsdev, dev);
+
 	tsdev_table[tsdev->minor] = NULL;
 	kfree(tsdev);
 }
@@ -200,12 +212,10 @@ static int tsdev_release(struct inode *inode, struct file *file)
 	list_del(&client->node);
 	kfree(client);
 
-	if (!--tsdev->open) {
-		if (tsdev->exist)
-			input_close_device(&tsdev->handle);
-		else
-			tsdev_free(tsdev);
-	}
+	if (!--tsdev->open && tsdev->exist)
+		input_close_device(&tsdev->handle);
+
+	put_device(&tsdev->dev);
 
 	return 0;
 }
@@ -361,7 +371,7 @@ static void tsdev_event(struct input_handle *handle, unsigned int type,
 		int x, y, tmp;
 
 		do_gettimeofday(&time);
-		client->event[client->head].millisecs = time.tv_usec / 100;
+		client->event[client->head].millisecs = time.tv_usec / 1000;
 		client->event[client->head].pressure = tsdev->pressure;
 
 		x = tsdev->x;
@@ -388,8 +398,6 @@ static int tsdev_connect(struct input_handler *handler, struct input_dev *dev,
 			 const struct input_device_id *id)
 {
 	struct tsdev *tsdev;
-	struct class_device *cdev;
-	dev_t devt;
 	int minor, delta;
 	int error;
 
@@ -407,14 +415,13 @@ static int tsdev_connect(struct input_handler *handler, struct input_dev *dev,
 	INIT_LIST_HEAD(&tsdev->client_list);
 	init_waitqueue_head(&tsdev->wait);
 
-	sprintf(tsdev->name, "ts%d", minor);
-
 	tsdev->exist = 1;
 	tsdev->minor = minor;
 	tsdev->handle.dev = dev;
 	tsdev->handle.name = tsdev->name;
 	tsdev->handle.handler = handler;
 	tsdev->handle.private = tsdev;
+	snprintf(tsdev->name, sizeof(tsdev->name), "ts%d", minor);
 
 	/* Precompute the rough calibration matrix */
 	delta = dev->absmax [ABS_X] - dev->absmin [ABS_X] + 1;
@@ -429,36 +436,30 @@ static int tsdev_connect(struct input_handler *handler, struct input_dev *dev,
 	tsdev->cal.yscale = (yres << 8) / delta;
 	tsdev->cal.ytrans = - ((dev->absmin [ABS_Y] * tsdev->cal.yscale) >> 8);
 
-	tsdev_table[minor] = tsdev;
-
-	devt = MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor),
+	snprintf(tsdev->dev.bus_id, sizeof(tsdev->dev.bus_id),
+		 "ts%d", minor);
+	tsdev->dev.class = &input_class;
+	tsdev->dev.parent = &dev->dev;
+	tsdev->dev.devt = MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor);
+	tsdev->dev.release = tsdev_free;
+	device_initialize(&tsdev->dev);
 
-	cdev = class_device_create(&input_class, &dev->cdev, devt,
-				   dev->cdev.dev, tsdev->name);
-	if (IS_ERR(cdev)) {
-		error = PTR_ERR(cdev);
-		goto err_free_tsdev;
-	}
+	tsdev_table[minor] = tsdev;
 
-	/* temporary symlink to keep userspace happy */
-	error = sysfs_create_link(&input_class.subsys.kobj,
-				  &cdev->kobj, tsdev->name);
+	error = device_add(&tsdev->dev);
 	if (error)
-		goto err_cdev_destroy;
+		goto err_free_tsdev;
 
 	error = input_register_handle(&tsdev->handle);
 	if (error)
-		goto err_remove_link;
+		goto err_delete_tsdev;
 
 	return 0;
 
- err_remove_link:
-	sysfs_remove_link(&input_class.subsys.kobj, tsdev->name);
- err_cdev_destroy:
-	class_device_destroy(&input_class, devt);
+ err_delete_tsdev:
+	device_del(&tsdev->dev);
  err_free_tsdev:
-	tsdev_table[minor] = NULL;
-	kfree(tsdev);
+	put_device(&tsdev->dev);
 	return error;
 }
 
@@ -468,10 +469,8 @@ static void tsdev_disconnect(struct input_handle *handle)
 	struct tsdev_client *client;
 
 	input_unregister_handle(handle);
+	device_del(&tsdev->dev);
 
-	sysfs_remove_link(&input_class.subsys.kobj, tsdev->name);
-	class_device_destroy(&input_class,
-			MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor));
 	tsdev->exist = 0;
 
 	if (tsdev->open) {
@@ -479,8 +478,9 @@ static void tsdev_disconnect(struct input_handle *handle)
 		list_for_each_entry(client, &tsdev->client_list, node)
 			kill_fasync(&client->fasync, SIGIO, POLL_HUP);
 		wake_up_interruptible(&tsdev->wait);
-	} else
-		tsdev_free(tsdev);
+	}
+
+	put_device(&tsdev->dev);
 }
 
 static const struct input_device_id tsdev_ids[] = {
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 340310645346..6339bb443f62 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -287,7 +287,6 @@ setup_sct_quadro(struct IsdnCard *card)
 #ifdef CONFIG_PCI
 	struct IsdnCardState *cs = card->cs;
 	char tmp[64];
-	u_char pci_rev_id;
 	u_int found = 0;
 	u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
 
@@ -335,8 +334,7 @@ setup_sct_quadro(struct IsdnCard *card)
 		}
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
-		pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
-		if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
+		if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
 			printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
 				CardType[card->typ],
 				sct_quadro_subtypes[cs->subtyp]);
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 11ced17f438a..4fcb245ba184 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -212,7 +212,6 @@ int wf_register_control(struct wf_control *new_ct)
 	list_add(&new_ct->link, &wf_controls);
 
 	new_ct->attr.attr.name = new_ct->name;
-	new_ct->attr.attr.owner = THIS_MODULE;
 	new_ct->attr.attr.mode = 0644;
 	new_ct->attr.show = wf_show_control;
 	new_ct->attr.store = wf_store_control;
@@ -325,7 +324,6 @@ int wf_register_sensor(struct wf_sensor *new_sr)
 	list_add(&new_sr->link, &wf_sensors);
 
 	new_sr->attr.attr.name = new_sr->name;
-	new_sr->attr.attr.owner = THIS_MODULE;
 	new_sr->attr.attr.mode = 0444;
 	new_sr->attr.show = wf_show_sensor;
 	new_sr->attr.store = NULL;
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 1043b39aa123..351982bcec1b 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -67,26 +67,6 @@ static struct i2c_driver wf_sat_driver = {
 	.detach_client	= wf_sat_detach,
 };
 
-/*
- * XXX i2c_smbus_read_i2c_block_data doesn't pass the requested
- * length down to the low-level driver, so we use this, which
- * works well enough with the SMU i2c driver code...
- */
-static int sat_read_block(struct i2c_client *client, u8 command,
-			  u8 *values, int len)
-{
-	union i2c_smbus_data data;
-	int err;
-
-	data.block[0] = len;
-	err = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-			     I2C_SMBUS_READ, command, I2C_SMBUS_I2C_BLOCK_DATA,
-			     &data);
-	if (!err)
-		memcpy(values, data.block, len);
-	return err;
-}
-
 struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 						  unsigned int *size)
 {
@@ -124,8 +104,8 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 		return NULL;
 
 	for (i = 0; i < len; i += 4) {
-		err = sat_read_block(&sat->i2c, 0xa, data, 4);
-		if (err) {
+		err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0xa, 4, data);
+		if (err < 0) {
 			printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
 			       err);
 			goto fail;
@@ -157,8 +137,8 @@ static int wf_sat_read_cache(struct wf_sat *sat)
 {
 	int err;
 
-	err = sat_read_block(&sat->i2c, 0x3f, sat->cache, 16);
-	if (err)
+	err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0x3f, 16, sat->cache);
+	if (err < 0)
 		return err;
 	sat->last_read = jiffies;
 #ifdef LOTSA_DEBUG
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index fdf5d6e46eac..5e6f17df204b 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -94,7 +94,6 @@ struct gemtek_pci_card {
 
 	u32 iobase;
 	u32 length;
-	u8  chiprev;
 	u16 model;
 
 	u32 current_frequency;
@@ -415,7 +414,6 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci
 		goto err_pci;
 	}
 
-	pci_read_config_byte( pci_dev, PCI_REVISION_ID, &card->chiprev );
 	pci_read_config_word( pci_dev, PCI_SUBSYSTEM_ID, &card->model );
 
 	pci_set_drvdata( pci_dev, card );
@@ -436,7 +434,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci
 	gemtek_pci_mute( card );
 
 	printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
-		card->chiprev, card->iobase, card->iobase + card->length - 1 );
+		pci_dev->revision, card->iobase, card->iobase + card->length - 1 );
 
 	return 0;
 
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 664aba8b4d85..7533fc203319 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1809,7 +1809,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 {
 	int ret = -EBUSY;
 	unsigned long mchip_adr;
-	u8 revision;
 
 	if (meye.mchip_dev != NULL) {
 		printk(KERN_ERR "meye: only one device allowed!\n");
@@ -1885,7 +1884,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 		goto outreqirq;
 	}
 
-	pci_read_config_byte(meye.mchip_dev, PCI_REVISION_ID, &revision);
 	pci_write_config_byte(meye.mchip_dev, PCI_CACHE_LINE_SIZE, 8);
 	pci_write_config_byte(meye.mchip_dev, PCI_LATENCY_TIMER, 64);
 
@@ -1939,7 +1937,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	printk(KERN_INFO "meye: Motion Eye Camera Driver v%s.\n",
 	       MEYE_DRIVER_VERSION);
 	printk(KERN_INFO "meye: mchip KL5A72002 rev. %d, base %lx, irq %d\n",
-	       revision, mchip_adr, meye.mchip_irq);
+	       meye.mchip_dev->revision, mchip_adr, meye.mchip_irq);
 
 	return 0;
 
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 616eee9c04f1..bd601efa7bd1 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -34,6 +34,11 @@ config PHANTOM
 	  If you choose to build module, its name will be phantom. If unsure,
 	  say N here.
 
+config EEPROM_93CX6
+	tristate "EEPROM 93CX6 support"
+	---help---
+	  This is a driver for the EEPROM chipsets 93c46 and 93c66.
+	  The driver supports both read as well as write commands.
 
 	  If unsure, say N.
 
@@ -187,5 +192,4 @@ config THINKPAD_ACPI_BAY
 
 	  If you are not sure, say Y here.
 
-
 endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 8abbf2f07a65..b5ce0e3dba86 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_PHANTOM)		+= phantom.o
 obj-$(CONFIG_SGI_IOC4)		+= ioc4.o
 obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o
 obj-$(CONFIG_THINKPAD_ACPI)	+= thinkpad_acpi.o
+obj-$(CONFIG_EEPROM_93CX6)	+= eeprom_93cx6.o
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index 4f9060a2a2f2..7798f590e5aa 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -737,8 +737,7 @@ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
 	struct device_attribute dev_attr_##_name = {			\
 		.attr = {						\
 			.name = __stringify(_name),			\
-			.mode = 0,					\
-			.owner = THIS_MODULE },				\
+			.mode = 0 },					\
 		.show   = NULL,						\
 		.store  = NULL,						\
 	}
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
new file mode 100644
index 000000000000..ea55654e5948
--- /dev/null
+++ b/drivers/misc/eeprom_93cx6.c
@@ -0,0 +1,241 @@
+/*
+	Copyright (C) 2004 - 2006 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: eeprom_93cx6
+	Abstract: EEPROM reader routines for 93cx6 chipsets.
+	Supported chipsets: 93c46 & 93c66.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/delay.h>
+#include <linux/eeprom_93cx6.h>
+
+MODULE_AUTHOR("http://rt2x00.serialmonkey.com");
+MODULE_VERSION("1.0");
+MODULE_DESCRIPTION("EEPROM 93cx6 chip driver");
+MODULE_LICENSE("GPL");
+
+static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
+{
+	eeprom->reg_data_clock = 1;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * Add a short delay for the pulse to work.
+	 * According to the specifications the "maximum minimum"
+	 * time should be 450ns.
+	 */
+	ndelay(450);
+}
+
+static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
+{
+	eeprom->reg_data_clock = 0;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * Add a short delay for the pulse to work.
+	 * According to the specifications the "maximum minimum"
+	 * time should be 450ns.
+	 */
+	ndelay(450);
+}
+
+static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
+{
+	/*
+	 * Clear all flags, and enable chip select.
+	 */
+	eeprom->register_read(eeprom);
+	eeprom->reg_data_in = 0;
+	eeprom->reg_data_out = 0;
+	eeprom->reg_data_clock = 0;
+	eeprom->reg_chip_select = 1;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * kick a pulse.
+	 */
+	eeprom_93cx6_pulse_high(eeprom);
+	eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_cleanup(struct eeprom_93cx6 *eeprom)
+{
+	/*
+	 * Clear chip_select and data_in flags.
+	 */
+	eeprom->register_read(eeprom);
+	eeprom->reg_data_in = 0;
+	eeprom->reg_chip_select = 0;
+	eeprom->register_write(eeprom);
+
+	/*
+	 * kick a pulse.
+	 */
+	eeprom_93cx6_pulse_high(eeprom);
+	eeprom_93cx6_pulse_low(eeprom);
+}
+
+static void eeprom_93cx6_write_bits(struct eeprom_93cx6 *eeprom,
+	const u16 data, const u16 count)
+{
+	unsigned int i;
+
+	eeprom->register_read(eeprom);
+
+	/*
+	 * Clear data flags.
+	 */
+	eeprom->reg_data_in = 0;
+	eeprom->reg_data_out = 0;
+
+	/*
+	 * Start writing all bits.
+	 */
+	for (i = count; i > 0; i--) {
+		/*
+		 * Check if this bit needs to be set.
+		 */
+		eeprom->reg_data_in = !!(data & (1 << (i - 1)));
+
+		/*
+		 * Write the bit to the eeprom register.
+		 */
+		eeprom->register_write(eeprom);
+
+		/*
+		 * Kick a pulse.
+		 */
+		eeprom_93cx6_pulse_high(eeprom);
+		eeprom_93cx6_pulse_low(eeprom);
+	}
+
+	eeprom->reg_data_in = 0;
+	eeprom->register_write(eeprom);
+}
+
+static void eeprom_93cx6_read_bits(struct eeprom_93cx6 *eeprom,
+	u16 *data, const u16 count)
+{
+	unsigned int i;
+	u16 buf = 0;
+
+	eeprom->register_read(eeprom);
+
+	/*
+	 * Clear data flags.
+	 */
+	eeprom->reg_data_in = 0;
+	eeprom->reg_data_out = 0;
+
+	/*
+	 * Start reading all bits.
+	 */
+	for (i = count; i > 0; i--) {
+		eeprom_93cx6_pulse_high(eeprom);
+
+		eeprom->register_read(eeprom);
+
+		/*
+		 * Clear data_in flag.
+		 */
+		eeprom->reg_data_in = 0;
+
+		/*
+		 * Read if the bit has been set.
+		 */
+		if (eeprom->reg_data_out)
+			buf |= (1 << (i - 1));
+
+		eeprom_93cx6_pulse_low(eeprom);
+	}
+
+	*data = buf;
+}
+
+/**
+ * eeprom_93cx6_read - Read multiple words from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ *
+ * This function will read the eeprom data as host-endian word
+ * into the given data pointer.
+ */
+void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, const u8 word,
+	u16 *data)
+{
+	u16 command;
+
+	/*
+	 * Initialize the eeprom register
+	 */
+	eeprom_93cx6_startup(eeprom);
+
+	/*
+	 * Select the read opcode and the word to be read.
+	 */
+	command = (PCI_EEPROM_READ_OPCODE << eeprom->width) | word;
+	eeprom_93cx6_write_bits(eeprom, command,
+		PCI_EEPROM_WIDTH_OPCODE + eeprom->width);
+
+	/*
+	 * Read the requested 16 bits.
+	 */
+	eeprom_93cx6_read_bits(eeprom, data, 16);
+
+	/*
+	 * Cleanup eeprom register.
+	 */
+	eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_read);
+
+/**
+ * eeprom_93cx6_multiread - Read multiple words from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Word index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ * @words: Number of words that should be read.
+ *
+ * This function will read all requested words from the eeprom,
+ * this is done by calling eeprom_93cx6_read() multiple times.
+ * But with the additional change that while the eeprom_93cx6_read
+ * will return host ordered bytes, this method will return little
+ * endian words.
+ */
+void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, const u8 word,
+	__le16 *data, const u16 words)
+{
+	unsigned int i;
+	u16 tmp;
+
+	for (i = 0; i < words; i++) {
+		tmp = 0;
+		eeprom_93cx6_read(eeprom, word + i, &tmp);
+		data[i] = cpu_to_le16(tmp);
+	}
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
+
diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c
index 41e901f53e7c..932a415197b3 100644
--- a/drivers/misc/msi-laptop.c
+++ b/drivers/misc/msi-laptop.c
@@ -23,6 +23,8 @@
  * msi-laptop.c - MSI S270 laptop support. This laptop is sold under
  * various brands, including "Cytron/TCM/Medion/Tchibo MD96100".
  *
+ * Driver also supports S271, S420 models.
+ *
  * This driver exports a few files in /sys/devices/platform/msi-laptop-pf/:
  *
  *   lcd_level - Screen brightness: contains a single integer in the
@@ -281,25 +283,56 @@ static struct platform_device *msipf_device;
 
 /* Initialization */
 
+static int dmi_check_cb(struct dmi_system_id *id)
+{
+        printk("msi-laptop: Identified laptop model '%s'.\n", id->ident);
+        return 0;
+}
+
 static struct dmi_system_id __initdata msi_dmi_table[] = {
 	{
 		.ident = "MSI S270",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT'L CO.,LTD"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1013"),
-		}
+			DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
+			DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT'L CO.,LTD")
+		},
+		.callback = dmi_check_cb
+	},
+	{
+		.ident = "MSI S271",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1058"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "0581"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-1058")
+		},
+		.callback = dmi_check_cb
+	},
+	{
+		.ident = "MSI S420",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MS-1412"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-1412")
+		},
+		.callback = dmi_check_cb
 	},
 	{
 		.ident = "Medion MD96100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "NOTEBOOK"),
 			DMI_MATCH(DMI_PRODUCT_NAME, "SAM2000"),
-		}
+			DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
+			DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT'L CO.,LTD")
+		},
+		.callback = dmi_check_cb
 	},
 	{ }
 };
 
-
 static int __init msi_init(void)
 {
 	int ret;
@@ -394,3 +427,8 @@ MODULE_AUTHOR("Lennart Poettering");
 MODULE_DESCRIPTION("MSI Laptop Support");
 MODULE_VERSION(MSI_DRIVER_VERSION);
 MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
+MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*");
+MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
+MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig
index 9320a8c73239..a49cb9737cd8 100644
--- a/drivers/mmc/card/Kconfig
+++ b/drivers/mmc/card/Kconfig
@@ -14,3 +14,21 @@ config MMC_BLOCK
 	  mount the filesystem. Almost everyone wishing MMC support
 	  should say Y or M here.
 
+config MMC_BLOCK_BOUNCE
+	bool "Use bounce buffer for simple hosts"
+	depends on MMC_BLOCK
+	default y
+	help
+	  SD/MMC is a high latency protocol where it is crucial to
+	  send large requests in order to get high performance. Many
+	  controllers, however, are restricted to continuous memory
+	  (i.e. they can't do scatter-gather), something the kernel
+	  rarely can provide.
+
+	  Say Y here to help these restricted hosts by bouncing
+	  requests back and forth from a large buffer. You will get
+	  a big performance gain at the cost of up to 64 KiB of
+	  physical memory.
+
+	  If unsure, say Y here.
+
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 540ff4bea54c..cbd4b6e3e17c 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -262,7 +262,9 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		}
 
 		brq.data.sg = mq->sg;
-		brq.data.sg_len = blk_rq_map_sg(req->q, req, brq.data.sg);
+		brq.data.sg_len = mmc_queue_map_sg(mq);
+
+		mmc_queue_bounce_pre(mq);
 
 		if (brq.data.blocks !=
 		    (req->nr_sectors >> (md->block_bits - 9))) {
@@ -279,6 +281,9 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		}
 
 		mmc_wait_for_req(card->host, &brq.mrq);
+
+		mmc_queue_bounce_post(mq);
+
 		if (brq.cmd.error) {
 			printk(KERN_ERR "%s: error %d sending read/write command\n",
 			       req->rq_disk->disk_name, brq.cmd.error);
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index dd97bc798409..4fb2089dc690 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -17,6 +17,8 @@
 #include <linux/mmc/host.h>
 #include "queue.h"
 
+#define MMC_QUEUE_BOUNCESZ	65536
+
 #define MMC_QUEUE_SUSPENDED	(1 << 0)
 
 /*
@@ -118,6 +120,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 	struct mmc_host *host = card->host;
 	u64 limit = BLK_BOUNCE_HIGH;
 	int ret;
+	unsigned int bouncesz;
 
 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
 		limit = *mmc_dev(host)->dma_mask;
@@ -127,21 +130,61 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 	if (!mq->queue)
 		return -ENOMEM;
 
-	blk_queue_prep_rq(mq->queue, mmc_prep_request);
-	blk_queue_bounce_limit(mq->queue, limit);
-	blk_queue_max_sectors(mq->queue, host->max_req_size / 512);
-	blk_queue_max_phys_segments(mq->queue, host->max_phys_segs);
-	blk_queue_max_hw_segments(mq->queue, host->max_hw_segs);
-	blk_queue_max_segment_size(mq->queue, host->max_seg_size);
-
 	mq->queue->queuedata = mq;
 	mq->req = NULL;
 
-	mq->sg = kmalloc(sizeof(struct scatterlist) * host->max_phys_segs,
-			 GFP_KERNEL);
-	if (!mq->sg) {
-		ret = -ENOMEM;
-		goto cleanup_queue;
+	blk_queue_prep_rq(mq->queue, mmc_prep_request);
+
+#ifdef CONFIG_MMC_BLOCK_BOUNCE
+	if (host->max_hw_segs == 1) {
+		bouncesz = MMC_QUEUE_BOUNCESZ;
+
+		if (bouncesz > host->max_req_size)
+			bouncesz = host->max_req_size;
+		if (bouncesz > host->max_seg_size)
+			bouncesz = host->max_seg_size;
+
+		mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+		if (!mq->bounce_buf) {
+			printk(KERN_WARNING "%s: unable to allocate "
+				"bounce buffer\n", mmc_card_name(card));
+		} else {
+			blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_HIGH);
+			blk_queue_max_sectors(mq->queue, bouncesz / 512);
+			blk_queue_max_phys_segments(mq->queue, bouncesz / 512);
+			blk_queue_max_hw_segments(mq->queue, bouncesz / 512);
+			blk_queue_max_segment_size(mq->queue, bouncesz);
+
+			mq->sg = kmalloc(sizeof(struct scatterlist),
+				GFP_KERNEL);
+			if (!mq->sg) {
+				ret = -ENOMEM;
+				goto free_bounce_buf;
+			}
+
+			mq->bounce_sg = kmalloc(sizeof(struct scatterlist) *
+				bouncesz / 512, GFP_KERNEL);
+			if (!mq->bounce_sg) {
+				ret = -ENOMEM;
+				goto free_sg;
+			}
+		}
+	}
+#endif
+
+	if (!mq->bounce_buf) {
+		blk_queue_bounce_limit(mq->queue, limit);
+		blk_queue_max_sectors(mq->queue, host->max_req_size / 512);
+		blk_queue_max_phys_segments(mq->queue, host->max_phys_segs);
+		blk_queue_max_hw_segments(mq->queue, host->max_hw_segs);
+		blk_queue_max_segment_size(mq->queue, host->max_seg_size);
+
+		mq->sg = kmalloc(sizeof(struct scatterlist) *
+			host->max_phys_segs, GFP_KERNEL);
+		if (!mq->sg) {
+			ret = -ENOMEM;
+			goto cleanup_queue;
+		}
 	}
 
 	init_MUTEX(&mq->thread_sem);
@@ -149,14 +192,21 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
 	mq->thread = kthread_run(mmc_queue_thread, mq, "mmcqd");
 	if (IS_ERR(mq->thread)) {
 		ret = PTR_ERR(mq->thread);
-		goto free_sg;
+		goto free_bounce_sg;
 	}
 
 	return 0;
-
+ free_bounce_sg:
+ 	if (mq->bounce_sg)
+ 		kfree(mq->bounce_sg);
+ 	mq->bounce_sg = NULL;
  free_sg:
 	kfree(mq->sg);
 	mq->sg = NULL;
+ free_bounce_buf:
+	if (mq->bounce_buf)
+		kfree(mq->bounce_buf);
+	mq->bounce_buf = NULL;
  cleanup_queue:
 	blk_cleanup_queue(mq->queue);
 	return ret;
@@ -178,9 +228,17 @@ void mmc_cleanup_queue(struct mmc_queue *mq)
 	/* Then terminate our worker thread */
 	kthread_stop(mq->thread);
 
+ 	if (mq->bounce_sg)
+ 		kfree(mq->bounce_sg);
+ 	mq->bounce_sg = NULL;
+
 	kfree(mq->sg);
 	mq->sg = NULL;
 
+	if (mq->bounce_buf)
+		kfree(mq->bounce_buf);
+	mq->bounce_buf = NULL;
+
 	blk_cleanup_queue(mq->queue);
 
 	mq->card = NULL;
@@ -231,3 +289,108 @@ void mmc_queue_resume(struct mmc_queue *mq)
 	}
 }
 
+static void copy_sg(struct scatterlist *dst, unsigned int dst_len,
+	struct scatterlist *src, unsigned int src_len)
+{
+	unsigned int chunk;
+	char *dst_buf, *src_buf;
+	unsigned int dst_size, src_size;
+
+	dst_buf = NULL;
+	src_buf = NULL;
+	dst_size = 0;
+	src_size = 0;
+
+	while (src_len) {
+		BUG_ON(dst_len == 0);
+
+		if (dst_size == 0) {
+			dst_buf = page_address(dst->page) + dst->offset;
+			dst_size = dst->length;
+		}
+
+		if (src_size == 0) {
+			src_buf = page_address(src->page) + src->offset;
+			src_size = src->length;
+		}
+
+		chunk = min(dst_size, src_size);
+
+		memcpy(dst_buf, src_buf, chunk);
+
+		dst_buf += chunk;
+		src_buf += chunk;
+		dst_size -= chunk;
+		src_size -= chunk;
+
+		if (dst_size == 0) {
+			dst++;
+			dst_len--;
+		}
+
+		if (src_size == 0) {
+			src++;
+			src_len--;
+		}
+	}
+}
+
+unsigned int mmc_queue_map_sg(struct mmc_queue *mq)
+{
+	unsigned int sg_len;
+
+	if (!mq->bounce_buf)
+		return blk_rq_map_sg(mq->queue, mq->req, mq->sg);
+
+	BUG_ON(!mq->bounce_sg);
+
+	sg_len = blk_rq_map_sg(mq->queue, mq->req, mq->bounce_sg);
+
+	mq->bounce_sg_len = sg_len;
+
+	/*
+	 * Shortcut in the event we only get a single entry.
+	 */
+	if (sg_len == 1) {
+		memcpy(mq->sg, mq->bounce_sg, sizeof(struct scatterlist));
+		return 1;
+	}
+
+	mq->sg[0].page = virt_to_page(mq->bounce_buf);
+	mq->sg[0].offset = offset_in_page(mq->bounce_buf);
+	mq->sg[0].length = 0;
+
+	while (sg_len) {
+		mq->sg[0].length += mq->bounce_sg[sg_len - 1].length;
+		sg_len--;
+	}
+
+	return 1;
+}
+
+void mmc_queue_bounce_pre(struct mmc_queue *mq)
+{
+	if (!mq->bounce_buf)
+		return;
+
+	if (mq->bounce_sg_len == 1)
+		return;
+	if (rq_data_dir(mq->req) != WRITE)
+		return;
+
+	copy_sg(mq->sg, 1, mq->bounce_sg, mq->bounce_sg_len);
+}
+
+void mmc_queue_bounce_post(struct mmc_queue *mq)
+{
+	if (!mq->bounce_buf)
+		return;
+
+	if (mq->bounce_sg_len == 1)
+		return;
+	if (rq_data_dir(mq->req) != READ)
+		return;
+
+	copy_sg(mq->bounce_sg, mq->bounce_sg_len, mq->sg, 1);
+}
+
diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h
index 1590b3f3f1f7..64e66e0d4994 100644
--- a/drivers/mmc/card/queue.h
+++ b/drivers/mmc/card/queue.h
@@ -14,6 +14,9 @@ struct mmc_queue {
 	void			*data;
 	struct request_queue	*queue;
 	struct scatterlist	*sg;
+	char			*bounce_buf;
+	struct scatterlist	*bounce_sg;
+	unsigned int		bounce_sg_len;
 };
 
 extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *);
@@ -21,4 +24,8 @@ extern void mmc_cleanup_queue(struct mmc_queue *);
 extern void mmc_queue_suspend(struct mmc_queue *);
 extern void mmc_queue_resume(struct mmc_queue *);
 
+extern unsigned int mmc_queue_map_sg(struct mmc_queue *);
+extern void mmc_queue_bounce_pre(struct mmc_queue *);
+extern void mmc_queue_bounce_post(struct mmc_queue *);
+
 #endif
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index 1075b02ae754..3fdd08c7f143 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -7,5 +7,6 @@ ifeq ($(CONFIG_MMC_DEBUG),y)
 endif
 
 obj-$(CONFIG_MMC)		+= mmc_core.o
-mmc_core-y			:= core.o sysfs.o mmc.o mmc_ops.o sd.o sd_ops.o
+mmc_core-y			:= core.o sysfs.o bus.o host.o \
+				   mmc.o mmc_ops.o sd.o sd_ops.o
 
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
new file mode 100644
index 000000000000..348b566bf4fd
--- /dev/null
+++ b/drivers/mmc/core/bus.c
@@ -0,0 +1,253 @@
+/*
+ *  linux/drivers/mmc/core/bus.c
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright (C) 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  MMC card bus driver model
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include "sysfs.h"
+#include "core.h"
+#include "bus.h"
+
+#define dev_to_mmc_card(d)	container_of(d, struct mmc_card, dev)
+#define to_mmc_driver(d)	container_of(d, struct mmc_driver, drv)
+
+static ssize_t mmc_type_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct mmc_card *card = dev_to_mmc_card(dev);
+
+	switch (card->type) {
+	case MMC_TYPE_MMC:
+		return sprintf(buf, "MMC\n");
+	case MMC_TYPE_SD:
+		return sprintf(buf, "SD\n");
+	default:
+		return -EFAULT;
+	}
+}
+
+static struct device_attribute mmc_dev_attrs[] = {
+	MMC_ATTR_RO(type),
+	__ATTR_NULL,
+};
+
+/*
+ * This currently matches any MMC driver to any MMC card - drivers
+ * themselves make the decision whether to drive this card in their
+ * probe method.
+ */
+static int mmc_bus_match(struct device *dev, struct device_driver *drv)
+{
+	return 1;
+}
+
+static int
+mmc_bus_uevent(struct device *dev, char **envp, int num_envp, char *buf,
+		int buf_size)
+{
+	struct mmc_card *card = dev_to_mmc_card(dev);
+	int retval = 0, i = 0, length = 0;
+
+#define add_env(fmt,val) do {					\
+	retval = add_uevent_var(envp, num_envp, &i,		\
+				buf, buf_size, &length,		\
+				fmt, val);			\
+	if (retval)						\
+		return retval;					\
+} while (0);
+
+	switch (card->type) {
+	case MMC_TYPE_MMC:
+		add_env("MMC_TYPE=%s", "MMC");
+		break;
+	case MMC_TYPE_SD:
+		add_env("MMC_TYPE=%s", "SD");
+		break;
+	}
+
+	add_env("MMC_NAME=%s", mmc_card_name(card));
+
+#undef add_env
+
+	envp[i] = NULL;
+
+	return 0;
+}
+
+static int mmc_bus_probe(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = dev_to_mmc_card(dev);
+
+	return drv->probe(card);
+}
+
+static int mmc_bus_remove(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = dev_to_mmc_card(dev);
+
+	drv->remove(card);
+
+	return 0;
+}
+
+static int mmc_bus_suspend(struct device *dev, pm_message_t state)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = dev_to_mmc_card(dev);
+	int ret = 0;
+
+	if (dev->driver && drv->suspend)
+		ret = drv->suspend(card, state);
+	return ret;
+}
+
+static int mmc_bus_resume(struct device *dev)
+{
+	struct mmc_driver *drv = to_mmc_driver(dev->driver);
+	struct mmc_card *card = dev_to_mmc_card(dev);
+	int ret = 0;
+
+	if (dev->driver && drv->resume)
+		ret = drv->resume(card);
+	return ret;
+}
+
+static struct bus_type mmc_bus_type = {
+	.name		= "mmc",
+	.dev_attrs	= mmc_dev_attrs,
+	.match		= mmc_bus_match,
+	.uevent		= mmc_bus_uevent,
+	.probe		= mmc_bus_probe,
+	.remove		= mmc_bus_remove,
+	.suspend	= mmc_bus_suspend,
+	.resume		= mmc_bus_resume,
+};
+
+int mmc_register_bus(void)
+{
+	return bus_register(&mmc_bus_type);
+}
+
+void mmc_unregister_bus(void)
+{
+	bus_unregister(&mmc_bus_type);
+}
+
+/**
+ *	mmc_register_driver - register a media driver
+ *	@drv: MMC media driver
+ */
+int mmc_register_driver(struct mmc_driver *drv)
+{
+	drv->drv.bus = &mmc_bus_type;
+	return driver_register(&drv->drv);
+}
+
+EXPORT_SYMBOL(mmc_register_driver);
+
+/**
+ *	mmc_unregister_driver - unregister a media driver
+ *	@drv: MMC media driver
+ */
+void mmc_unregister_driver(struct mmc_driver *drv)
+{
+	drv->drv.bus = &mmc_bus_type;
+	driver_unregister(&drv->drv);
+}
+
+EXPORT_SYMBOL(mmc_unregister_driver);
+
+static void mmc_release_card(struct device *dev)
+{
+	struct mmc_card *card = dev_to_mmc_card(dev);
+
+	kfree(card);
+}
+
+/*
+ * Allocate and initialise a new MMC card structure.
+ */
+struct mmc_card *mmc_alloc_card(struct mmc_host *host)
+{
+	struct mmc_card *card;
+
+	card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL);
+	if (!card)
+		return ERR_PTR(-ENOMEM);
+
+	memset(card, 0, sizeof(struct mmc_card));
+
+	card->host = host;
+
+	device_initialize(&card->dev);
+
+	card->dev.parent = mmc_classdev(host);
+	card->dev.bus = &mmc_bus_type;
+	card->dev.release = mmc_release_card;
+
+	return card;
+}
+
+/*
+ * Register a new MMC card with the driver model.
+ */
+int mmc_add_card(struct mmc_card *card)
+{
+	int ret;
+
+	snprintf(card->dev.bus_id, sizeof(card->dev.bus_id),
+		 "%s:%04x", mmc_hostname(card->host), card->rca);
+
+	card->dev.uevent_suppress = 1;
+
+	ret = device_add(&card->dev);
+	if (ret)
+		return ret;
+
+	if (card->host->bus_ops->sysfs_add) {
+		ret = card->host->bus_ops->sysfs_add(card->host, card);
+		if (ret) {
+			device_del(&card->dev);
+			return ret;
+		 }
+	}
+
+	card->dev.uevent_suppress = 0;
+
+	kobject_uevent(&card->dev.kobj, KOBJ_ADD);
+
+	mmc_card_set_present(card);
+
+	return 0;
+}
+
+/*
+ * Unregister a new MMC card with the driver model, and
+ * (eventually) free it.
+ */
+void mmc_remove_card(struct mmc_card *card)
+{
+	if (mmc_card_present(card)) {
+		if (card->host->bus_ops->sysfs_remove)
+			card->host->bus_ops->sysfs_remove(card->host, card);
+		device_del(&card->dev);
+	}
+
+	put_device(&card->dev);
+}
+
diff --git a/drivers/mmc/core/bus.h b/drivers/mmc/core/bus.h
new file mode 100644
index 000000000000..4f35431116a8
--- /dev/null
+++ b/drivers/mmc/core/bus.h
@@ -0,0 +1,22 @@
+/*
+ *  linux/drivers/mmc/core/bus.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _MMC_CORE_BUS_H
+#define _MMC_CORE_BUS_H
+
+struct mmc_card *mmc_alloc_card(struct mmc_host *host);
+int mmc_add_card(struct mmc_card *card);
+void mmc_remove_card(struct mmc_card *card);
+
+int mmc_register_bus(void);
+void mmc_unregister_bus(void);
+
+#endif
+
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 7385acfa1dd9..b5d8a6d90cca 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -27,7 +27,8 @@
 #include <linux/mmc/sd.h>
 
 #include "core.h"
-#include "sysfs.h"
+#include "bus.h"
+#include "host.h"
 
 #include "mmc_ops.h"
 #include "sd_ops.h"
@@ -35,6 +36,25 @@
 extern int mmc_attach_mmc(struct mmc_host *host, u32 ocr);
 extern int mmc_attach_sd(struct mmc_host *host, u32 ocr);
 
+static struct workqueue_struct *workqueue;
+
+/*
+ * Internal function. Schedule delayed work in the MMC work queue.
+ */
+static int mmc_schedule_delayed_work(struct delayed_work *work,
+				     unsigned long delay)
+{
+	return queue_delayed_work(workqueue, work, delay);
+}
+
+/*
+ * Internal function. Flush all scheduled work from the MMC work queue.
+ */
+static void mmc_flush_scheduled_work(void)
+{
+	flush_workqueue(workqueue);
+}
+
 /**
  *	mmc_request_done - finish processing an MMC request
  *	@host: MMC host which completed request
@@ -369,22 +389,6 @@ void mmc_set_timing(struct mmc_host *host, unsigned int timing)
 }
 
 /*
- * Allocate a new MMC card
- */
-struct mmc_card *mmc_alloc_card(struct mmc_host *host)
-{
-	struct mmc_card *card;
-
-	card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL);
-	if (!card)
-		return ERR_PTR(-ENOMEM);
-
-	mmc_init_card(card, host);
-
-	return card;
-}
-
-/*
  * Apply power to the MMC stack.  This is a two-stage process.
  * First, we enable power to the card without the clock running.
  * We then wait a bit for the power to stabilise.  Finally,
@@ -512,7 +516,7 @@ void mmc_detect_change(struct mmc_host *host, unsigned long delay)
 EXPORT_SYMBOL(mmc_detect_change);
 
 
-static void mmc_rescan(struct work_struct *work)
+void mmc_rescan(struct work_struct *work)
 {
 	struct mmc_host *host =
 		container_of(work, struct mmc_host, detect.work);
@@ -561,69 +565,13 @@ static void mmc_rescan(struct work_struct *work)
 	}
 }
 
-
-/**
- *	mmc_alloc_host - initialise the per-host structure.
- *	@extra: sizeof private data structure
- *	@dev: pointer to host device model structure
- *
- *	Initialise the per-host structure.
- */
-struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
+void mmc_start_host(struct mmc_host *host)
 {
-	struct mmc_host *host;
-
-	host = mmc_alloc_host_sysfs(extra, dev);
-	if (host) {
-		spin_lock_init(&host->lock);
-		init_waitqueue_head(&host->wq);
-		INIT_DELAYED_WORK(&host->detect, mmc_rescan);
-
-		/*
-		 * By default, hosts do not support SGIO or large requests.
-		 * They have to set these according to their abilities.
-		 */
-		host->max_hw_segs = 1;
-		host->max_phys_segs = 1;
-		host->max_seg_size = PAGE_CACHE_SIZE;
-
-		host->max_req_size = PAGE_CACHE_SIZE;
-		host->max_blk_size = 512;
-		host->max_blk_count = PAGE_CACHE_SIZE / 512;
-	}
-
-	return host;
-}
-
-EXPORT_SYMBOL(mmc_alloc_host);
-
-/**
- *	mmc_add_host - initialise host hardware
- *	@host: mmc host
- */
-int mmc_add_host(struct mmc_host *host)
-{
-	int ret;
-
-	ret = mmc_add_host_sysfs(host);
-	if (ret == 0) {
-		mmc_power_off(host);
-		mmc_detect_change(host, 0);
-	}
-
-	return ret;
+	mmc_power_off(host);
+	mmc_detect_change(host, 0);
 }
 
-EXPORT_SYMBOL(mmc_add_host);
-
-/**
- *	mmc_remove_host - remove host hardware
- *	@host: mmc host
- *
- *	Unregister and remove all cards associated with this host,
- *	and power down the MMC bus.
- */
-void mmc_remove_host(struct mmc_host *host)
+void mmc_stop_host(struct mmc_host *host)
 {
 #ifdef CONFIG_MMC_DEBUG
 	unsigned long flags;
@@ -648,24 +596,8 @@ void mmc_remove_host(struct mmc_host *host)
 	BUG_ON(host->card);
 
 	mmc_power_off(host);
-	mmc_remove_host_sysfs(host);
 }
 
-EXPORT_SYMBOL(mmc_remove_host);
-
-/**
- *	mmc_free_host - free the host structure
- *	@host: mmc host
- *
- *	Free the host once all references to it have been dropped.
- */
-void mmc_free_host(struct mmc_host *host)
-{
-	mmc_free_host_sysfs(host);
-}
-
-EXPORT_SYMBOL(mmc_free_host);
-
 #ifdef CONFIG_PM
 
 /**
@@ -726,4 +658,31 @@ EXPORT_SYMBOL(mmc_resume_host);
 
 #endif
 
+static int __init mmc_init(void)
+{
+	int ret;
+
+	workqueue = create_singlethread_workqueue("kmmcd");
+	if (!workqueue)
+		return -ENOMEM;
+
+	ret = mmc_register_bus();
+	if (ret == 0) {
+		ret = mmc_register_host_class();
+		if (ret)
+			mmc_unregister_bus();
+	}
+	return ret;
+}
+
+static void __exit mmc_exit(void)
+{
+	mmc_unregister_host_class();
+	mmc_unregister_bus();
+	destroy_workqueue(workqueue);
+}
+
+module_init(mmc_init);
+module_exit(mmc_exit);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 177264d090ac..ae006b30dd86 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -18,6 +18,8 @@
 struct mmc_bus_ops {
 	void (*remove)(struct mmc_host *);
 	void (*detect)(struct mmc_host *);
+	int (*sysfs_add)(struct mmc_host *, struct mmc_card *card);
+	void (*sysfs_remove)(struct mmc_host *, struct mmc_card *card);
 	void (*suspend)(struct mmc_host *);
 	void (*resume)(struct mmc_host *);
 };
@@ -54,8 +56,6 @@ void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 
-struct mmc_card *mmc_alloc_card(struct mmc_host *host);
-
 static inline void mmc_delay(unsigned int ms)
 {
 	if (ms < 1000 / HZ) {
@@ -66,5 +66,9 @@ static inline void mmc_delay(unsigned int ms)
 	}
 }
 
+void mmc_rescan(struct work_struct *work);
+void mmc_start_host(struct mmc_host *host);
+void mmc_stop_host(struct mmc_host *host);
+
 #endif
 
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
new file mode 100644
index 000000000000..1433d95c40bb
--- /dev/null
+++ b/drivers/mmc/core/host.c
@@ -0,0 +1,156 @@
+/*
+ *  linux/drivers/mmc/core/host.c
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright (C) 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  MMC host class device management
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/pagemap.h>
+
+#include <linux/mmc/host.h>
+
+#include "core.h"
+#include "host.h"
+
+#define cls_dev_to_mmc_host(d)	container_of(d, struct mmc_host, class_dev)
+
+static void mmc_host_classdev_release(struct device *dev)
+{
+	struct mmc_host *host = cls_dev_to_mmc_host(dev);
+	kfree(host);
+}
+
+static struct class mmc_host_class = {
+	.name		= "mmc_host",
+	.dev_release	= mmc_host_classdev_release,
+};
+
+int mmc_register_host_class(void)
+{
+	return class_register(&mmc_host_class);
+}
+
+void mmc_unregister_host_class(void)
+{
+	class_unregister(&mmc_host_class);
+}
+
+static DEFINE_IDR(mmc_host_idr);
+static DEFINE_SPINLOCK(mmc_host_lock);
+
+/**
+ *	mmc_alloc_host - initialise the per-host structure.
+ *	@extra: sizeof private data structure
+ *	@dev: pointer to host device model structure
+ *
+ *	Initialise the per-host structure.
+ */
+struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
+{
+	struct mmc_host *host;
+
+	host = kmalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL);
+	if (!host)
+		return NULL;
+
+	memset(host, 0, sizeof(struct mmc_host) + extra);
+
+	host->parent = dev;
+	host->class_dev.parent = dev;
+	host->class_dev.class = &mmc_host_class;
+	device_initialize(&host->class_dev);
+
+	spin_lock_init(&host->lock);
+	init_waitqueue_head(&host->wq);
+	INIT_DELAYED_WORK(&host->detect, mmc_rescan);
+
+	/*
+	 * By default, hosts do not support SGIO or large requests.
+	 * They have to set these according to their abilities.
+	 */
+	host->max_hw_segs = 1;
+	host->max_phys_segs = 1;
+	host->max_seg_size = PAGE_CACHE_SIZE;
+
+	host->max_req_size = PAGE_CACHE_SIZE;
+	host->max_blk_size = 512;
+	host->max_blk_count = PAGE_CACHE_SIZE / 512;
+
+	return host;
+}
+
+EXPORT_SYMBOL(mmc_alloc_host);
+
+/**
+ *	mmc_add_host - initialise host hardware
+ *	@host: mmc host
+ */
+int mmc_add_host(struct mmc_host *host)
+{
+	int err;
+
+	if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL))
+		return -ENOMEM;
+
+	spin_lock(&mmc_host_lock);
+	err = idr_get_new(&mmc_host_idr, host, &host->index);
+	spin_unlock(&mmc_host_lock);
+	if (err)
+		return err;
+
+	snprintf(host->class_dev.bus_id, BUS_ID_SIZE,
+		 "mmc%d", host->index);
+
+	err = device_add(&host->class_dev);
+	if (err)
+		return err;
+
+	mmc_start_host(host);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(mmc_add_host);
+
+/**
+ *	mmc_remove_host - remove host hardware
+ *	@host: mmc host
+ *
+ *	Unregister and remove all cards associated with this host,
+ *	and power down the MMC bus.
+ */
+void mmc_remove_host(struct mmc_host *host)
+{
+	mmc_stop_host(host);
+
+	device_del(&host->class_dev);
+
+	spin_lock(&mmc_host_lock);
+	idr_remove(&mmc_host_idr, host->index);
+	spin_unlock(&mmc_host_lock);
+}
+
+EXPORT_SYMBOL(mmc_remove_host);
+
+/**
+ *	mmc_free_host - free the host structure
+ *	@host: mmc host
+ *
+ *	Free the host once all references to it have been dropped.
+ */
+void mmc_free_host(struct mmc_host *host)
+{
+	put_device(&host->class_dev);
+}
+
+EXPORT_SYMBOL(mmc_free_host);
+
diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h
new file mode 100644
index 000000000000..c2dc3d2d9f9a
--- /dev/null
+++ b/drivers/mmc/core/host.h
@@ -0,0 +1,18 @@
+/*
+ *  linux/drivers/mmc/core/host.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _MMC_CORE_HOST_H
+#define _MMC_CORE_HOST_H
+
+int mmc_register_host_class(void);
+void mmc_unregister_host_class(void);
+
+#endif
+
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 42cc2867ed7d..66f85bfa8dbb 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -18,6 +18,7 @@
 
 #include "core.h"
 #include "sysfs.h"
+#include "bus.h"
 #include "mmc_ops.h"
 
 static const unsigned int tran_exp[] = {
@@ -236,7 +237,7 @@ out:
  * In the case of a resume, "curcard" will contain the card
  * we're trying to reinitialise.
  */
-static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
+static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
@@ -413,8 +414,7 @@ static void mmc_detect(struct mmc_host *host)
 	mmc_release_host(host);
 
 	if (err != MMC_ERR_NONE) {
-		mmc_remove_card(host->card);
-		host->card = NULL;
+		mmc_remove(host);
 
 		mmc_claim_host(host);
 		mmc_detach_bus(host);
@@ -422,6 +422,53 @@ static void mmc_detect(struct mmc_host *host)
 	}
 }
 
+MMC_ATTR_FN(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
+	card->raw_cid[2], card->raw_cid[3]);
+MMC_ATTR_FN(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
+	card->raw_csd[2], card->raw_csd[3]);
+MMC_ATTR_FN(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_ATTR_FN(fwrev, "0x%x\n", card->cid.fwrev);
+MMC_ATTR_FN(hwrev, "0x%x\n", card->cid.hwrev);
+MMC_ATTR_FN(manfid, "0x%06x\n", card->cid.manfid);
+MMC_ATTR_FN(name, "%s\n", card->cid.prod_name);
+MMC_ATTR_FN(oemid, "0x%04x\n", card->cid.oemid);
+MMC_ATTR_FN(serial, "0x%08x\n", card->cid.serial);
+
+static struct device_attribute mmc_dev_attrs[] = {
+	MMC_ATTR_RO(cid),
+	MMC_ATTR_RO(csd),
+	MMC_ATTR_RO(date),
+	MMC_ATTR_RO(fwrev),
+	MMC_ATTR_RO(hwrev),
+	MMC_ATTR_RO(manfid),
+	MMC_ATTR_RO(name),
+	MMC_ATTR_RO(oemid),
+	MMC_ATTR_RO(serial),
+	__ATTR_NULL,
+};
+
+/*
+ * Adds sysfs entries as relevant.
+ */
+static int mmc_sysfs_add(struct mmc_host *host, struct mmc_card *card)
+{
+	int ret;
+
+	ret = mmc_add_attrs(card, mmc_dev_attrs);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Removes the sysfs entries added by mmc_sysfs_add().
+ */
+static void mmc_sysfs_remove(struct mmc_host *host, struct mmc_card *card)
+{
+	mmc_remove_attrs(card, mmc_dev_attrs);
+}
+
 #ifdef CONFIG_MMC_UNSAFE_RESUME
 
 /*
@@ -453,11 +500,9 @@ static void mmc_resume(struct mmc_host *host)
 
 	mmc_claim_host(host);
 
-	err = mmc_sd_init_card(host, host->ocr, host->card);
+	err = mmc_init_card(host, host->ocr, host->card);
 	if (err != MMC_ERR_NONE) {
-		mmc_remove_card(host->card);
-		host->card = NULL;
-
+		mmc_remove(host);
 		mmc_detach_bus(host);
 	}
 
@@ -474,6 +519,8 @@ static void mmc_resume(struct mmc_host *host)
 static const struct mmc_bus_ops mmc_ops = {
 	.remove = mmc_remove,
 	.detect = mmc_detect,
+	.sysfs_add = mmc_sysfs_add,
+	.sysfs_remove = mmc_sysfs_remove,
 	.suspend = mmc_suspend,
 	.resume = mmc_resume,
 };
@@ -512,13 +559,13 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
 	/*
 	 * Detect and init the card.
 	 */
-	err = mmc_sd_init_card(host, host->ocr, NULL);
+	err = mmc_init_card(host, host->ocr, NULL);
 	if (err != MMC_ERR_NONE)
 		goto err;
 
 	mmc_release_host(host);
 
-	err = mmc_register_card(host->card);
+	err = mmc_add_card(host->card);
 	if (err)
 		goto reclaim_host;
 
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 918477c490b0..1240684083f1 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -19,11 +19,10 @@
 
 #include "core.h"
 #include "sysfs.h"
+#include "bus.h"
 #include "mmc_ops.h"
 #include "sd_ops.h"
 
-#include "core.h"
-
 static const unsigned int tran_exp[] = {
 	10000,		100000,		1000000,	10000000,
 	0,		0,		0,		0
@@ -487,8 +486,7 @@ static void mmc_sd_detect(struct mmc_host *host)
 	mmc_release_host(host);
 
 	if (err != MMC_ERR_NONE) {
-		mmc_remove_card(host->card);
-		host->card = NULL;
+		mmc_sd_remove(host);
 
 		mmc_claim_host(host);
 		mmc_detach_bus(host);
@@ -496,6 +494,55 @@ static void mmc_sd_detect(struct mmc_host *host)
 	}
 }
 
+MMC_ATTR_FN(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
+	card->raw_cid[2], card->raw_cid[3]);
+MMC_ATTR_FN(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
+	card->raw_csd[2], card->raw_csd[3]);
+MMC_ATTR_FN(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]);
+MMC_ATTR_FN(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_ATTR_FN(fwrev, "0x%x\n", card->cid.fwrev);
+MMC_ATTR_FN(hwrev, "0x%x\n", card->cid.hwrev);
+MMC_ATTR_FN(manfid, "0x%06x\n", card->cid.manfid);
+MMC_ATTR_FN(name, "%s\n", card->cid.prod_name);
+MMC_ATTR_FN(oemid, "0x%04x\n", card->cid.oemid);
+MMC_ATTR_FN(serial, "0x%08x\n", card->cid.serial);
+
+static struct device_attribute mmc_sd_dev_attrs[] = {
+	MMC_ATTR_RO(cid),
+	MMC_ATTR_RO(csd),
+	MMC_ATTR_RO(scr),
+	MMC_ATTR_RO(date),
+	MMC_ATTR_RO(fwrev),
+	MMC_ATTR_RO(hwrev),
+	MMC_ATTR_RO(manfid),
+	MMC_ATTR_RO(name),
+	MMC_ATTR_RO(oemid),
+	MMC_ATTR_RO(serial),
+	__ATTR_NULL,
+};
+
+/*
+ * Adds sysfs entries as relevant.
+ */
+static int mmc_sd_sysfs_add(struct mmc_host *host, struct mmc_card *card)
+{
+	int ret;
+
+	ret = mmc_add_attrs(card, mmc_sd_dev_attrs);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Removes the sysfs entries added by mmc_sysfs_add().
+ */
+static void mmc_sd_sysfs_remove(struct mmc_host *host, struct mmc_card *card)
+{
+	mmc_remove_attrs(card, mmc_sd_dev_attrs);
+}
+
 #ifdef CONFIG_MMC_UNSAFE_RESUME
 
 /*
@@ -529,9 +576,7 @@ static void mmc_sd_resume(struct mmc_host *host)
 
 	err = mmc_sd_init_card(host, host->ocr, host->card);
 	if (err != MMC_ERR_NONE) {
-		mmc_remove_card(host->card);
-		host->card = NULL;
-
+		mmc_sd_remove(host);
 		mmc_detach_bus(host);
 	}
 
@@ -548,6 +593,8 @@ static void mmc_sd_resume(struct mmc_host *host)
 static const struct mmc_bus_ops mmc_sd_ops = {
 	.remove = mmc_sd_remove,
 	.detect = mmc_sd_detect,
+	.sysfs_add = mmc_sd_sysfs_add,
+	.sysfs_remove = mmc_sd_sysfs_remove,
 	.suspend = mmc_sd_suspend,
 	.resume = mmc_sd_resume,
 };
@@ -599,7 +646,7 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
 
 	mmc_release_host(host);
 
-	err = mmc_register_card(host->card);
+	err = mmc_add_card(host->card);
 	if (err)
 		goto reclaim_host;
 
diff --git a/drivers/mmc/core/sysfs.c b/drivers/mmc/core/sysfs.c
index 843b1fbba557..00a97e70f914 100644
--- a/drivers/mmc/core/sysfs.c
+++ b/drivers/mmc/core/sysfs.c
@@ -2,6 +2,7 @@
  *  linux/drivers/mmc/core/sysfs.c
  *
  *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *  Copyright 2007 Pierre Ossman
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -9,352 +10,34 @@
  *
  *  MMC sysfs/driver model support.
  */
-#include <linux/module.h>
-#include <linux/init.h>
 #include <linux/device.h>
-#include <linux/idr.h>
-#include <linux/workqueue.h>
 
 #include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
 
 #include "sysfs.h"
 
-#define dev_to_mmc_card(d)	container_of(d, struct mmc_card, dev)
-#define to_mmc_driver(d)	container_of(d, struct mmc_driver, drv)
-#define cls_dev_to_mmc_host(d)	container_of(d, struct mmc_host, class_dev)
-
-#define MMC_ATTR(name, fmt, args...)					\
-static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf)	\
-{									\
-	struct mmc_card *card = dev_to_mmc_card(dev);			\
-	return sprintf(buf, fmt, args);					\
-}
-
-MMC_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
-	card->raw_cid[2], card->raw_cid[3]);
-MMC_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
-	card->raw_csd[2], card->raw_csd[3]);
-MMC_ATTR(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]);
-MMC_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
-MMC_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
-MMC_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
-MMC_ATTR(manfid, "0x%06x\n", card->cid.manfid);
-MMC_ATTR(name, "%s\n", card->cid.prod_name);
-MMC_ATTR(oemid, "0x%04x\n", card->cid.oemid);
-MMC_ATTR(serial, "0x%08x\n", card->cid.serial);
-
-#define MMC_ATTR_RO(name) __ATTR(name, S_IRUGO, mmc_##name##_show, NULL)
-
-static struct device_attribute mmc_dev_attrs[] = {
-	MMC_ATTR_RO(cid),
-	MMC_ATTR_RO(csd),
-	MMC_ATTR_RO(date),
-	MMC_ATTR_RO(fwrev),
-	MMC_ATTR_RO(hwrev),
-	MMC_ATTR_RO(manfid),
-	MMC_ATTR_RO(name),
-	MMC_ATTR_RO(oemid),
-	MMC_ATTR_RO(serial),
-	__ATTR_NULL
-};
-
-static struct device_attribute mmc_dev_attr_scr = MMC_ATTR_RO(scr);
-
-
-static void mmc_release_card(struct device *dev)
-{
-	struct mmc_card *card = dev_to_mmc_card(dev);
-
-	kfree(card);
-}
-
-/*
- * This currently matches any MMC driver to any MMC card - drivers
- * themselves make the decision whether to drive this card in their
- * probe method.
- */
-static int mmc_bus_match(struct device *dev, struct device_driver *drv)
-{
-	return 1;
-}
-
-static int
-mmc_bus_uevent(struct device *dev, char **envp, int num_envp, char *buf,
-		int buf_size)
-{
-	struct mmc_card *card = dev_to_mmc_card(dev);
-	char ccc[13];
-	int retval = 0, i = 0, length = 0;
-
-#define add_env(fmt,val) do {					\
-	retval = add_uevent_var(envp, num_envp, &i,		\
-				buf, buf_size, &length,		\
-				fmt, val);			\
-	if (retval)						\
-		return retval;					\
-} while (0);
-
-	for (i = 0; i < 12; i++)
-		ccc[i] = card->csd.cmdclass & (1 << i) ? '1' : '0';
-	ccc[12] = '\0';
-
-	add_env("MMC_CCC=%s", ccc);
-	add_env("MMC_MANFID=%06x", card->cid.manfid);
-	add_env("MMC_NAME=%s", mmc_card_name(card));
-	add_env("MMC_OEMID=%04x", card->cid.oemid);
-#undef add_env
-	envp[i] = NULL;
-
-	return 0;
-}
-
-static int mmc_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct mmc_driver *drv = to_mmc_driver(dev->driver);
-	struct mmc_card *card = dev_to_mmc_card(dev);
-	int ret = 0;
-
-	if (dev->driver && drv->suspend)
-		ret = drv->suspend(card, state);
-	return ret;
-}
-
-static int mmc_bus_resume(struct device *dev)
-{
-	struct mmc_driver *drv = to_mmc_driver(dev->driver);
-	struct mmc_card *card = dev_to_mmc_card(dev);
-	int ret = 0;
-
-	if (dev->driver && drv->resume)
-		ret = drv->resume(card);
-	return ret;
-}
-
-static int mmc_bus_probe(struct device *dev)
-{
-	struct mmc_driver *drv = to_mmc_driver(dev->driver);
-	struct mmc_card *card = dev_to_mmc_card(dev);
-
-	return drv->probe(card);
-}
-
-static int mmc_bus_remove(struct device *dev)
-{
-	struct mmc_driver *drv = to_mmc_driver(dev->driver);
-	struct mmc_card *card = dev_to_mmc_card(dev);
-
-	drv->remove(card);
-
-	return 0;
-}
-
-static struct bus_type mmc_bus_type = {
-	.name		= "mmc",
-	.dev_attrs	= mmc_dev_attrs,
-	.match		= mmc_bus_match,
-	.uevent		= mmc_bus_uevent,
-	.probe		= mmc_bus_probe,
-	.remove		= mmc_bus_remove,
-	.suspend	= mmc_bus_suspend,
-	.resume		= mmc_bus_resume,
-};
-
-/**
- *	mmc_register_driver - register a media driver
- *	@drv: MMC media driver
- */
-int mmc_register_driver(struct mmc_driver *drv)
-{
-	drv->drv.bus = &mmc_bus_type;
-	return driver_register(&drv->drv);
-}
-
-EXPORT_SYMBOL(mmc_register_driver);
-
-/**
- *	mmc_unregister_driver - unregister a media driver
- *	@drv: MMC media driver
- */
-void mmc_unregister_driver(struct mmc_driver *drv)
-{
-	drv->drv.bus = &mmc_bus_type;
-	driver_unregister(&drv->drv);
-}
-
-EXPORT_SYMBOL(mmc_unregister_driver);
-
-
-/*
- * Internal function.  Initialise a MMC card structure.
- */
-void mmc_init_card(struct mmc_card *card, struct mmc_host *host)
-{
-	memset(card, 0, sizeof(struct mmc_card));
-	card->host = host;
-	device_initialize(&card->dev);
-	card->dev.parent = mmc_classdev(host);
-	card->dev.bus = &mmc_bus_type;
-	card->dev.release = mmc_release_card;
-}
-
-/*
- * Internal function.  Register a new MMC card with the driver model.
- */
-int mmc_register_card(struct mmc_card *card)
+int mmc_add_attrs(struct mmc_card *card, struct device_attribute *attrs)
 {
-	int ret;
+	int error = 0;
+	int i;
 
-	snprintf(card->dev.bus_id, sizeof(card->dev.bus_id),
-		 "%s:%04x", mmc_hostname(card->host), card->rca);
-
-	ret = device_add(&card->dev);
-	if (ret == 0) {
-		if (mmc_card_sd(card)) {
-			ret = device_create_file(&card->dev, &mmc_dev_attr_scr);
-			if (ret)
-				device_del(&card->dev);
+	for (i = 0; attr_name(attrs[i]); i++) {
+		error = device_create_file(&card->dev, &attrs[i]);
+		if (error) {
+			while (--i >= 0)
+				device_remove_file(&card->dev, &attrs[i]);
+			break;
 		}
 	}
-	if (ret == 0)
-		mmc_card_set_present(card);
-	return ret;
-}
-
-/*
- * Internal function.  Unregister a new MMC card with the
- * driver model, and (eventually) free it.
- */
-void mmc_remove_card(struct mmc_card *card)
-{
-	if (mmc_card_present(card)) {
-		if (mmc_card_sd(card))
-			device_remove_file(&card->dev, &mmc_dev_attr_scr);
-
-		device_del(&card->dev);
-	}
-
-	put_device(&card->dev);
-}
-
-
-static void mmc_host_classdev_release(struct device *dev)
-{
-	struct mmc_host *host = cls_dev_to_mmc_host(dev);
-	kfree(host);
-}
-
-static struct class mmc_host_class = {
-	.name		= "mmc_host",
-	.dev_release	= mmc_host_classdev_release,
-};
-
-static DEFINE_IDR(mmc_host_idr);
-static DEFINE_SPINLOCK(mmc_host_lock);
-
-/*
- * Internal function. Allocate a new MMC host.
- */
-struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev)
-{
-	struct mmc_host *host;
-
-	host = kmalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL);
-	if (host) {
-		memset(host, 0, sizeof(struct mmc_host) + extra);
-
-		host->parent = dev;
-		host->class_dev.parent = dev;
-		host->class_dev.class = &mmc_host_class;
-		device_initialize(&host->class_dev);
-	}
 
-	return host;
+	return error;
 }
 
-/*
- * Internal function. Register a new MMC host with the MMC class.
- */
-int mmc_add_host_sysfs(struct mmc_host *host)
+void mmc_remove_attrs(struct mmc_card *card, struct device_attribute *attrs)
 {
-	int err;
-
-	if (!idr_pre_get(&mmc_host_idr, GFP_KERNEL))
-		return -ENOMEM;
-
-	spin_lock(&mmc_host_lock);
-	err = idr_get_new(&mmc_host_idr, host, &host->index);
-	spin_unlock(&mmc_host_lock);
-	if (err)
-		return err;
-
-	snprintf(host->class_dev.bus_id, BUS_ID_SIZE,
-		 "mmc%d", host->index);
-
-	return device_add(&host->class_dev);
-}
+	int i;
 
-/*
- * Internal function. Unregister a MMC host with the MMC class.
- */
-void mmc_remove_host_sysfs(struct mmc_host *host)
-{
-	device_del(&host->class_dev);
-
-	spin_lock(&mmc_host_lock);
-	idr_remove(&mmc_host_idr, host->index);
-	spin_unlock(&mmc_host_lock);
-}
-
-/*
- * Internal function. Free a MMC host.
- */
-void mmc_free_host_sysfs(struct mmc_host *host)
-{
-	put_device(&host->class_dev);
-}
-
-static struct workqueue_struct *workqueue;
-
-/*
- * Internal function. Schedule delayed work in the MMC work queue.
- */
-int mmc_schedule_delayed_work(struct delayed_work *work, unsigned long delay)
-{
-	return queue_delayed_work(workqueue, work, delay);
-}
-
-/*
- * Internal function. Flush all scheduled work from the MMC work queue.
- */
-void mmc_flush_scheduled_work(void)
-{
-	flush_workqueue(workqueue);
-}
-
-static int __init mmc_init(void)
-{
-	int ret;
-
-	workqueue = create_singlethread_workqueue("kmmcd");
-	if (!workqueue)
-		return -ENOMEM;
-
-	ret = bus_register(&mmc_bus_type);
-	if (ret == 0) {
-		ret = class_register(&mmc_host_class);
-		if (ret)
-			bus_unregister(&mmc_bus_type);
-	}
-	return ret;
-}
-
-static void __exit mmc_exit(void)
-{
-	class_unregister(&mmc_host_class);
-	bus_unregister(&mmc_bus_type);
-	destroy_workqueue(workqueue);
+	for (i = 0; attr_name(attrs[i]); i++)
+		device_remove_file(&card->dev, &attrs[i]);
 }
 
-module_init(mmc_init);
-module_exit(mmc_exit);
diff --git a/drivers/mmc/core/sysfs.h b/drivers/mmc/core/sysfs.h
index 80e29b358282..4b8f670bd10f 100644
--- a/drivers/mmc/core/sysfs.h
+++ b/drivers/mmc/core/sysfs.h
@@ -11,17 +11,16 @@
 #ifndef _MMC_CORE_SYSFS_H
 #define _MMC_CORE_SYSFS_H
 
-void mmc_init_card(struct mmc_card *card, struct mmc_host *host);
-int mmc_register_card(struct mmc_card *card);
-void mmc_remove_card(struct mmc_card *card);
+#define MMC_ATTR_FN(name, fmt, args...)					\
+static ssize_t mmc_##name##_show (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	struct mmc_card *card = container_of(dev, struct mmc_card, dev);\
+	return sprintf(buf, fmt, args);					\
+}
 
-struct mmc_host *mmc_alloc_host_sysfs(int extra, struct device *dev);
-int mmc_add_host_sysfs(struct mmc_host *host);
-void mmc_remove_host_sysfs(struct mmc_host *host);
-void mmc_free_host_sysfs(struct mmc_host *host);
+#define MMC_ATTR_RO(name) __ATTR(name, S_IRUGO, mmc_##name##_show, NULL)
 
-int mmc_schedule_work(struct work_struct *work);
-int mmc_schedule_delayed_work(struct delayed_work *work, unsigned long delay);
-void mmc_flush_scheduled_work(void);
+int mmc_add_attrs(struct mmc_card *card, struct device_attribute *attrs);
+void mmc_remove_attrs(struct mmc_card *card, struct device_attribute *attrs);
 
 #endif
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 5b00c194b628..28c881895ab7 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -78,8 +78,6 @@
 
 #define DRIVER_NAME "at91_mci"
 
-#undef	SUPPORT_4WIRE
-
 #define FL_SENT_COMMAND	(1 << 0)
 #define FL_SENT_STOP	(1 << 1)
 
@@ -131,7 +129,7 @@ struct at91mci_host
 /*
  * Copy from sg to a dma block - used for transfers
  */
-static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
+static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
 {
 	unsigned int len, i, size;
 	unsigned *dmabuf = host->buffer;
@@ -180,7 +178,7 @@ static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data
 /*
  * Prepare a dma read
  */
-static void at91mci_pre_dma_read(struct at91mci_host *host)
+static void at91_mci_pre_dma_read(struct at91mci_host *host)
 {
 	int i;
 	struct scatterlist *sg;
@@ -248,7 +246,7 @@ static void at91mci_pre_dma_read(struct at91mci_host *host)
 /*
  * Handle after a dma read
  */
-static void at91mci_post_dma_read(struct at91mci_host *host)
+static void at91_mci_post_dma_read(struct at91mci_host *host)
 {
 	struct mmc_command *cmd;
 	struct mmc_data *data;
@@ -268,8 +266,6 @@ static void at91mci_post_dma_read(struct at91mci_host *host)
 	}
 
 	while (host->in_use_index < host->transfer_index) {
-		unsigned int *buffer;
-
 		struct scatterlist *sg;
 
 		pr_debug("finishing index %d\n", host->in_use_index);
@@ -280,29 +276,31 @@ static void at91mci_post_dma_read(struct at91mci_host *host)
 
 		dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE);
 
-		/* Swap the contents of the buffer */
-		buffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
-		pr_debug("buffer = %p, length = %d\n", buffer, sg->length);
-
 		data->bytes_xfered += sg->length;
 
 		if (cpu_is_at91rm9200()) {	/* AT91RM9200 errata */
+			unsigned int *buffer;
 			int index;
 
+			/* Swap the contents of the buffer */
+			buffer = kmap_atomic(sg->page, KM_BIO_SRC_IRQ) + sg->offset;
+			pr_debug("buffer = %p, length = %d\n", buffer, sg->length);
+
 			for (index = 0; index < (sg->length / 4); index++)
 				buffer[index] = swab32(buffer[index]);
+
+			kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
 		}
 
-		kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
 		flush_dcache_page(sg->page);
 	}
 
 	/* Is there another transfer to trigger? */
 	if (host->transfer_index < data->sg_len)
-		at91mci_pre_dma_read(host);
+		at91_mci_pre_dma_read(host);
 	else {
+		at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX);
 		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
-		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 	}
 
 	pr_debug("post dma read done\n");
@@ -323,7 +321,6 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
 
 	/* Now wait for cmd ready */
 	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
 
 	cmd = host->cmd;
 	if (!cmd) return;
@@ -331,18 +328,53 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
 	data = cmd->data;
 	if (!data) return;
 
+	if (cmd->data->flags & MMC_DATA_MULTI) {
+		pr_debug("multiple write : wait for BLKE...\n");
+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
+	} else
+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+
 	data->bytes_xfered = host->total_length;
 }
 
+/*Handle after command sent ready*/
+static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
+{
+	if (!host->cmd)
+		return 1;
+	else if (!host->cmd->data) {
+		if (host->flags & FL_SENT_STOP) {
+			/*After multi block write, we must wait for NOTBUSY*/
+			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
+		} else return 1;
+	} else if (host->cmd->data->flags & MMC_DATA_WRITE) {
+		/*After sendding multi-block-write command, start DMA transfer*/
+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE);
+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
+	}
+
+	/* command not completed, have to wait */
+	return 0;
+}
+
+
 /*
  * Enable the controller
  */
 static void at91_mci_enable(struct at91mci_host *host)
 {
+	unsigned int mr;
+
 	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
 	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
 	at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
-	at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
+	mr = AT91_MCI_PDCMODE | 0x34a;
+
+	if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+		mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF;
+
+	at91_mci_write(host, AT91_MCI_MR, mr);
 
 	/* use Slot A or B (only one at same time) */
 	at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
@@ -358,9 +390,8 @@ static void at91_mci_disable(struct at91mci_host *host)
 
 /*
  * Send a command
- * return the interrupts to enable
  */
-static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
+static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
 {
 	unsigned int cmdr, mr;
 	unsigned int block_length;
@@ -371,8 +402,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 
 	host->cmd = cmd;
 
-	/* Not sure if this is needed */
-#if 0
+	/* Needed for leaving busy state before CMD1 */
 	if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
 		pr_debug("Clearing timeout\n");
 		at91_mci_write(host, AT91_MCI_ARGR, 0);
@@ -382,7 +412,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 			pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
 		}
 	}
-#endif
+
 	cmdr = cmd->opcode;
 
 	if (mmc_resp_type(cmd) == MMC_RSP_NONE)
@@ -439,50 +469,48 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 		at91_mci_write(host, ATMEL_PDC_TCR, 0);
 		at91_mci_write(host, ATMEL_PDC_TNPR, 0);
 		at91_mci_write(host, ATMEL_PDC_TNCR, 0);
+		ier = AT91_MCI_CMDRDY;
+	} else {
+		/* zero block length and PDC mode */
+		mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
+		at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
 
-		at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
-		at91_mci_write(host, AT91_MCI_CMDR, cmdr);
-		return AT91_MCI_CMDRDY;
-	}
-
-	mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;	/* zero block length and PDC mode */
-	at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
-
-	/*
-	 * Disable the PDC controller
-	 */
-	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-
-	if (cmdr & AT91_MCI_TRCMD_START) {
-		data->bytes_xfered = 0;
-		host->transfer_index = 0;
-		host->in_use_index = 0;
-		if (cmdr & AT91_MCI_TRDIR) {
-			/*
-			 * Handle a read
-			 */
-			host->buffer = NULL;
-			host->total_length = 0;
-
-			at91mci_pre_dma_read(host);
-			ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
-		}
-		else {
-			/*
-			 * Handle a write
-			 */
-			host->total_length = block_length * blocks;
-			host->buffer = dma_alloc_coherent(NULL,
-						  host->total_length,
-						  &host->physical_address, GFP_KERNEL);
-
-			at91mci_sg_to_dma(host, data);
-
-			pr_debug("Transmitting %d bytes\n", host->total_length);
+		/*
+		 * Disable the PDC controller
+		 */
+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
 
-			at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
-			at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
-			ier = AT91_MCI_TXBUFE;
+		if (cmdr & AT91_MCI_TRCMD_START) {
+			data->bytes_xfered = 0;
+			host->transfer_index = 0;
+			host->in_use_index = 0;
+			if (cmdr & AT91_MCI_TRDIR) {
+				/*
+				 * Handle a read
+				 */
+				host->buffer = NULL;
+				host->total_length = 0;
+
+				at91_mci_pre_dma_read(host);
+				ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
+			}
+			else {
+				/*
+				 * Handle a write
+				 */
+				host->total_length = block_length * blocks;
+				host->buffer = dma_alloc_coherent(NULL,
+						host->total_length,
+						&host->physical_address, GFP_KERNEL);
+
+				at91_mci_sg_to_dma(host, data);
+
+				pr_debug("Transmitting %d bytes\n", host->total_length);
+
+				at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
+				at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
+				ier = AT91_MCI_CMDRDY;
+			}
 		}
 	}
 
@@ -497,39 +525,24 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
 	if (cmdr & AT91_MCI_TRCMD_START) {
 		if (cmdr & AT91_MCI_TRDIR)
 			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
-		else
-			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
 	}
-	return ier;
-}
-
-/*
- * Wait for a command to complete
- */
-static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
-{
-	unsigned int ier;
-
-	ier = at91_mci_send_command(host, cmd);
-
-	pr_debug("setting ier to %08X\n", ier);
 
-	/* Stop on errors or the required value */
+	/* Enable selected interrupts */
 	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
 }
 
 /*
  * Process the next step in the request
  */
-static void at91mci_process_next(struct at91mci_host *host)
+static void at91_mci_process_next(struct at91mci_host *host)
 {
 	if (!(host->flags & FL_SENT_COMMAND)) {
 		host->flags |= FL_SENT_COMMAND;
-		at91mci_process_command(host, host->request->cmd);
+		at91_mci_send_command(host, host->request->cmd);
 	}
 	else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
 		host->flags |= FL_SENT_STOP;
-		at91mci_process_command(host, host->request->stop);
+		at91_mci_send_command(host, host->request->stop);
 	}
 	else
 		mmc_request_done(host->mmc, host->request);
@@ -538,7 +551,7 @@ static void at91mci_process_next(struct at91mci_host *host)
 /*
  * Handle a command that has been completed
  */
-static void at91mci_completed_command(struct at91mci_host *host)
+static void at91_mci_completed_command(struct at91mci_host *host)
 {
 	struct mmc_command *cmd = host->cmd;
 	unsigned int status;
@@ -583,7 +596,7 @@ static void at91mci_completed_command(struct at91mci_host *host)
 	else
 		cmd->error = MMC_ERR_NONE;
 
-	at91mci_process_next(host);
+	at91_mci_process_next(host);
 }
 
 /*
@@ -595,7 +608,7 @@ static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	host->request = mrq;
 	host->flags = 0;
 
-	at91mci_process_next(host);
+	at91_mci_process_next(host);
 }
 
 /*
@@ -698,29 +711,33 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 			at91_mci_handle_transmitted(host);
 		}
 
+		if (int_status & AT91_MCI_ENDRX) {
+			pr_debug("ENDRX\n");
+			at91_mci_post_dma_read(host);
+		}
+
 		if (int_status & AT91_MCI_RXBUFF) {
 			pr_debug("RX buffer full\n");
-			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
+			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+			at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX);
+			completed = 1;
 		}
 
 		if (int_status & AT91_MCI_ENDTX)
 			pr_debug("Transmit has ended\n");
 
-		if (int_status & AT91_MCI_ENDRX) {
-			pr_debug("Receive has ended\n");
-			at91mci_post_dma_read(host);
-		}
-
 		if (int_status & AT91_MCI_NOTBUSY) {
 			pr_debug("Card is ready\n");
-			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
+			completed = 1;
 		}
 
 		if (int_status & AT91_MCI_DTIP)
 			pr_debug("Data transfer in progress\n");
 
-		if (int_status & AT91_MCI_BLKE)
+		if (int_status & AT91_MCI_BLKE) {
 			pr_debug("Block transfer has ended\n");
+			completed = 1;
+		}
 
 		if (int_status & AT91_MCI_TXRDY)
 			pr_debug("Ready to transmit\n");
@@ -730,14 +747,14 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
 
 		if (int_status & AT91_MCI_CMDRDY) {
 			pr_debug("Command ready\n");
-			completed = 1;
+			completed = at91_mci_handle_cmdrdy(host);
 		}
 	}
 
 	if (completed) {
 		pr_debug("Completed command\n");
 		at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
-		at91mci_completed_command(host);
+		at91_mci_completed_command(host);
 	} else
 		at91_mci_write(host, AT91_MCI_IDR, int_status);
 
@@ -830,11 +847,11 @@ static int __init at91_mci_probe(struct platform_device *pdev)
 	host->bus_mode = 0;
 	host->board = pdev->dev.platform_data;
 	if (host->board->wire4) {
-#ifdef SUPPORT_4WIRE
-		mmc->caps |= MMC_CAP_4_BIT_DATA;
-#else
-		printk("AT91 MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
-#endif
+		if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
+			mmc->caps |= MMC_CAP_4_BIT_DATA;
+		else
+			printk("AT91 MMC: 4 wire bus mode not supported"
+				" - using 1 wire\n");
 	}
 
 	/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a359efdd77eb..10d15c39d003 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -70,6 +70,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.driver_data	= SDHCI_QUIRK_SINGLE_POWER_WRITE,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_ENE,
+		.device		= PCI_DEVICE_ID_ENE_CB712_SD_2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= SDHCI_QUIRK_SINGLE_POWER_WRITE,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},
@@ -1022,7 +1030,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 		writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
 	}
 
-	intmask &= SDHCI_INT_BUS_POWER;
+	intmask &= ~SDHCI_INT_BUS_POWER;
 
 	if (intmask) {
 		printk(KERN_ERR "%s: Unexpected interrupt 0x%08x.\n",
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 78872c3f3760..b96ac8e119dc 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -84,7 +84,7 @@ static unsigned long __initdata doc_locations[] = {
 #elif defined(CONFIG_MOMENCO_OCELOT)
 	0x2f000000,
         0xff000000,
-#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
+#elif defined(CONFIG_MOMENCO_OCELOT_G)
         0xff000000,
 ##else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index b665e4ac2208..f88ebc5b685e 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -258,12 +258,6 @@ config MTD_TSUNAMI
 	help
 	  Support for the flash chip on Tsunami TIG bus.
 
-config MTD_LASAT
-	tristate "LASAT flash device"
-	depends on LASAT && MTD_CFI
-	help
-	  Support for the flash chips on the Lasat 100 and 200 boards.
-
 config MTD_NETtel
 	tristate "CFI flash device on SnapGear/SecureEdge"
 	depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 3acbb5d01ca4..970b189271a2 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -47,7 +47,6 @@ obj-$(CONFIG_MTD_OCELOT)	+= ocelot.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
 obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-obj-$(CONFIG_MTD_LASAT)		+= lasat.o
 obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
 obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
 obj-$(CONFIG_MTD_IMPA7)		+= impa7.o
diff --git a/drivers/mtd/maps/lasat.c b/drivers/mtd/maps/lasat.c
deleted file mode 100644
index e34376321050..000000000000
--- a/drivers/mtd/maps/lasat.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Flash device on Lasat 100 and 200 boards
- *
- * (C) 2002 Brian Murphy <brian@murphy.dk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * $Id: lasat.c,v 1.9 2004/11/04 13:24:15 gleixner Exp $
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <asm/lasat/lasat.h>
-
-static struct mtd_info *lasat_mtd;
-
-static struct mtd_partition partition_info[LASAT_MTD_LAST];
-static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Filesystem", "Config"};
-
-static void lasat_set_vpp(struct map_info *map, int vpp)
-{
-	if (vpp)
-	    *lasat_misc->flash_wp_reg |= 1 << lasat_misc->flash_wp_bit;
-	else
-	    *lasat_misc->flash_wp_reg &= ~(1 << lasat_misc->flash_wp_bit);
-}
-
-static struct map_info lasat_map = {
-	.name = "LASAT flash",
-	.bankwidth = 4,
-	.set_vpp = lasat_set_vpp
-};
-
-static int __init init_lasat(void)
-{
-	int i;
-	/* since we use AMD chips and set_vpp is not implimented
-	 * for these (yet) we still have to permanently enable flash write */
-	printk(KERN_NOTICE "Unprotecting flash\n");
-	ENABLE_VPP((&lasat_map));
-
-	lasat_map.phys = lasat_flash_partition_start(LASAT_MTD_BOOTLOADER);
-	lasat_map.virt = ioremap_nocache(
-		        lasat_map.phys, lasat_board_info.li_flash_size);
-	lasat_map.size = lasat_board_info.li_flash_size;
-
-	simple_map_init(&lasat_map);
-
-	for (i=0; i < LASAT_MTD_LAST; i++)
-		partition_info[i].name = lasat_mtd_partnames[i];
-
-	lasat_mtd = do_map_probe("cfi_probe", &lasat_map);
-
-	if (!lasat_mtd)
-	    lasat_mtd = do_map_probe("jedec_probe", &lasat_map);
-
-	if (lasat_mtd) {
-		u32 size, offset = 0;
-
-		lasat_mtd->owner = THIS_MODULE;
-
-		for (i=0; i < LASAT_MTD_LAST; i++) {
-			size = lasat_flash_partition_size(i);
-			partition_info[i].size = size;
-			partition_info[i].offset = offset;
-			offset += size;
-		}
-
-		add_mtd_partitions( lasat_mtd, partition_info, LASAT_MTD_LAST );
-		return 0;
-	}
-
-	iounmap(lasat_map.virt);
-	return -ENXIO;
-}
-
-static void __exit cleanup_lasat(void)
-{
-	if (lasat_mtd) {
-		del_mtd_partitions(lasat_mtd);
-		map_destroy(lasat_mtd);
-	}
-	if (lasat_map.virt) {
-		iounmap(lasat_map.virt);
-		lasat_map.virt = 0;
-	}
-}
-
-module_init(init_lasat);
-module_exit(cleanup_lasat);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Brian Murphy <brian@murphy.dk>");
-MODULE_DESCRIPTION("Lasat Safepipe/Masquerade MTD map driver");
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 595208f965a5..17c868034aad 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -59,7 +59,7 @@ static unsigned long __initdata doc_locations[] = {
 #elif defined(CONFIG_MOMENCO_OCELOT)
 	0x2f000000,
 	0xff000000,
-#elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
+#elif defined(CONFIG_MOMENCO_OCELOT_G)
 	0xff000000,
 #else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index da1a22c13865..ab18343e58ef 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -990,7 +990,7 @@ static void elmc_rcv_int(struct net_device *dev)
 				if (skb != NULL) {
 					skb_reserve(skb, 2);	/* 16 byte alignment */
 					skb_put(skb,totlen);
-					eth_copy_and_sum(skb, (char *) p->base+(unsigned long) rbd->buffer,totlen,0);
+					skb_copy_to_linear_data(skb, (char *) p->base+(unsigned long) rbd->buffer,totlen);
 					skb->protocol = eth_type_trans(skb, dev);
 					netif_rx(skb);
 					dev->last_rx = jiffies;
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index f26ca331615e..6deb20fc7a08 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -324,7 +324,7 @@ static struct vortex_chip_info {
 	{"3c980C Python-T",
 	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
 	{"3cSOHO100-TX Hurricane",
-	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+	 PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
 	{"3c555 Laptop Hurricane",
 	 PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, },
 	{"3c556 Laptop Tornado",
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 0877fc372f4b..e89ace109a5d 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -333,9 +333,9 @@ static int lance_rx (struct net_device *dev)
 
                         skb_reserve (skb, 2);           /* 16 byte align */
                         skb_put (skb, len);             /* make room */
-                        eth_copy_and_sum(skb,
+                        skb_copy_to_linear_data(skb,
                                          (unsigned char *)&(ib->rx_buf [lp->rx_new][0]),
-                                         len, 0);
+                                         len);
                         skb->protocol = eth_type_trans (skb, dev);
 			netif_rx (skb);
 			dev->last_rx = jiffies;
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index a804965e6542..807e6992e614 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -107,11 +107,6 @@ MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered mu
 
 #define PFX			DRV_NAME ": "
 
-#ifndef TRUE
-#define FALSE 0
-#define TRUE (!FALSE)
-#endif
-
 #define CP_DEF_MSG_ENABLE	(NETIF_MSG_DRV		| \
 				 NETIF_MSG_PROBE 	| \
 				 NETIF_MSG_LINK)
@@ -661,7 +656,7 @@ static irqreturn_t cp_interrupt (int irq, void *dev_instance)
 	if (status & (TxOK | TxErr | TxEmpty | SWInt))
 		cp_tx(cp);
 	if (status & LinkChg)
-		mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
+		mii_check_media(&cp->mii_if, netif_msg_link(cp), false);
 
 	spin_unlock(&cp->lock);
 
@@ -1188,7 +1183,7 @@ static int cp_open (struct net_device *dev)
 		goto err_out_hw;
 
 	netif_carrier_off(dev);
-	mii_check_media(&cp->mii_if, netif_msg_link(cp), TRUE);
+	mii_check_media(&cp->mii_if, netif_msg_link(cp), true);
 	netif_start_queue(dev);
 
 	return 0;
@@ -1804,7 +1799,6 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	void __iomem *regs;
 	resource_size_t pciaddr;
 	unsigned int addr_len, i, pci_using_dac;
-	u8 pci_rev;
 
 #ifndef MODULE
 	static int version_printed;
@@ -1812,13 +1806,11 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		printk("%s", version);
 #endif
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
-	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) {
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
 		dev_err(&pdev->dev,
 			   "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
-		           pdev->vendor, pdev->device, pci_rev);
+		           pdev->vendor, pdev->device, pdev->revision);
 		dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n");
 		return -ENODEV;
 	}
@@ -2050,7 +2042,7 @@ static int cp_resume (struct pci_dev *pdev)
 
 	spin_lock_irqsave (&cp->lock, flags);
 
-	mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
+	mii_check_media(&cp->mii_if, netif_msg_link(cp), false);
 
 	spin_unlock_irqrestore (&cp->lock, flags);
 
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index a844b1fe2dc4..327eaa7b4999 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -931,7 +931,6 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	int i, addr_len, option;
 	void __iomem *ioaddr;
 	static int board_idx = -1;
-	u8 pci_rev;
 
 	assert (pdev != NULL);
 	assert (ent != NULL);
@@ -949,13 +948,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
 	}
 #endif
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
 	if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
-	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
+	    pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
 		dev_info(&pdev->dev,
 			   "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
-		       	   pdev->vendor, pdev->device, pci_rev);
+		       	   pdev->vendor, pdev->device, pdev->revision);
 		dev_info(&pdev->dev,
 			   "Use the \"8139cp\" driver for improved performance and stability.\n");
 	}
@@ -2017,7 +2014,7 @@ no_early_rx:
 #if RX_BUF_IDX == 3
 			wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
 #else
-			eth_copy_and_sum (skb, &rx_ring[ring_offset + 4], pkt_size, 0);
+			skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
 #endif
 			skb_put (skb, pkt_size);
 
diff --git a/drivers/net/8390.h b/drivers/net/8390.h
index 414de5bd228f..04ddec0f4c61 100644
--- a/drivers/net/8390.h
+++ b/drivers/net/8390.h
@@ -73,6 +73,9 @@ struct ei_device {
 	u32 *reg_offset;		/* Register mapping table */
 	spinlock_t page_lock;		/* Page register locks */
 	unsigned long priv;		/* Private field to store bus IDs etc. */
+#ifdef AX88796_PLATFORM
+	unsigned char rxcr_base;	/* default value for RXCR */
+#endif
 };
 
 /* The maximum number of 8390 interrupt service routines called per IRQ. */
@@ -86,11 +89,19 @@ struct ei_device {
 /* Some generic ethernet register configurations. */
 #define E8390_TX_IRQ_MASK	0xa	/* For register EN0_ISR */
 #define E8390_RX_IRQ_MASK	0x5
+
+#ifdef AX88796_PLATFORM
+#define E8390_RXCONFIG		(ei_status.rxcr_base | 0x04)
+#define E8390_RXOFF		(ei_status.rxcr_base | 0x20)
+#else
 #define E8390_RXCONFIG		0x4	/* EN0_RXCR: broadcasts, no multicast,errors */
 #define E8390_RXOFF		0x20	/* EN0_RXCR: Accept no packets */
+#endif
+
 #define E8390_TXCONFIG		0x00	/* EN0_TXCR: Normal transmit mode */
 #define E8390_TXOFF		0x02	/* EN0_TXCR: Transmitter off */
 
+
 /*  Register accessed at EN_CMD, the 8390 base addr.  */
 #define E8390_STOP	0x01	/* Stop and reset the chip */
 #define E8390_START	0x02	/* Start the chip, clear reset */
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b49375abb5f4..ba314adf68b8 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3,10 +3,7 @@
 # Network device configuration
 #
 
-menu "Network device support"
-	depends on NET
-
-config NETDEVICES
+menuconfig NETDEVICES
 	default y if UML
 	bool "Network device support"
 	---help---
@@ -28,6 +25,14 @@ config NETDEVICES
 # that for each of the symbols.
 if NETDEVICES
 
+config NETDEVICES_MULTIQUEUE
+	bool "Netdevice multiple hardware queue support"
+	---help---
+	  Say Y here if you want to allow the network stack to use multiple
+	  hardware TX queues on an ethernet device.
+
+	  Most people will say N here.
+
 config IFB
 	tristate "Intermediate Functional Block support"
 	depends on NET_CLS_ACT
@@ -151,11 +156,9 @@ source "drivers/net/phy/Kconfig"
 #	Ethernet
 #
 
-menu "Ethernet (10 or 100Mbit)"
-	depends on !UML
-
-config NET_ETHERNET
+menuconfig NET_ETHERNET
 	bool "Ethernet (10 or 100Mbit)"
+	depends on !UML
 	---help---
 	  Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
 	  type of Local Area Network (LAN) in universities and companies.
@@ -180,9 +183,10 @@ config NET_ETHERNET
 	  kernel: saying N will just cause the configurator to skip all
 	  the questions about Ethernet network cards. If unsure, say N.
 
+if NET_ETHERNET
+
 config MII
 	tristate "Generic Media Independent Interface device support"
-	depends on NET_ETHERNET
 	help
 	  Most ethernet controllers have MII transceiver either as an external
 	  or internal device.  It is safe to say Y or M here even if your
@@ -190,7 +194,7 @@ config MII
 
 config MACB
 	tristate "Atmel MACB support"
-	depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
 	select MII
 	help
 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
@@ -201,9 +205,18 @@ config MACB
 
 source "drivers/net/arm/Kconfig"
 
+config AX88796
+	tristate "ASIX AX88796 NE2000 clone support"
+	depends on ARM || MIPS
+	select CRC32
+	select MII
+	help
+	  AX88796 driver, using platform bus to provide
+	  chip detection and resources
+
 config MACE
 	tristate "MACE (Power Mac ethernet) support"
-	depends on NET_ETHERNET && PPC_PMAC && PPC32
+	depends on PPC_PMAC && PPC32
 	select CRC32
 	help
 	  Power Macintoshes and clones with Ethernet built-in on the
@@ -226,7 +239,7 @@ config MACE_AAUI_PORT
 
 config BMAC
 	tristate "BMAC (G3 ethernet) support"
-	depends on NET_ETHERNET && PPC_PMAC && PPC32
+	depends on PPC_PMAC && PPC32
 	select CRC32
 	help
 	  Say Y for support of BMAC Ethernet interfaces. These are used on G3
@@ -237,7 +250,7 @@ config BMAC
 
 config ARIADNE
 	tristate "Ariadne support"
-	depends on NET_ETHERNET && ZORRO
+	depends on ZORRO
 	help
 	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
 	  Otherwise, say N.
@@ -247,7 +260,7 @@ config ARIADNE
 
 config A2065
 	tristate "A2065 support"
-	depends on NET_ETHERNET && ZORRO
+	depends on ZORRO
 	select CRC32
 	help
 	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
@@ -258,7 +271,7 @@ config A2065
 
 config HYDRA
 	tristate "Hydra support"
-	depends on NET_ETHERNET && ZORRO
+	depends on ZORRO
 	select CRC32
 	help
 	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
@@ -268,7 +281,7 @@ config HYDRA
 
 config ZORRO8390
 	tristate "Zorro NS8390-based Ethernet support"
-	depends on NET_ETHERNET && ZORRO
+	depends on ZORRO
 	select CRC32
 	help
 	  This driver is for Zorro Ethernet cards using an NS8390-compatible
@@ -281,7 +294,7 @@ config ZORRO8390
 
 config APNE
 	tristate "PCMCIA NE2000 support"
-	depends on NET_ETHERNET && AMIGA_PCMCIA
+	depends on AMIGA_PCMCIA
 	select CRC32
 	help
 	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
@@ -292,7 +305,7 @@ config APNE
 
 config APOLLO_ELPLUS
 	tristate "Apollo 3c505 support"
-	depends on NET_ETHERNET && APOLLO
+	depends on APOLLO
 	help
 	  Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
 	  If you don't have one made for Apollos, you can use one from a PC,
@@ -301,7 +314,7 @@ config APOLLO_ELPLUS
 
 config MAC8390
 	bool "Macintosh NS 8390 based ethernet cards"
-	depends on NET_ETHERNET && MAC
+	depends on MAC
 	select CRC32
 	help
 	  If you want to include a driver to support Nubus or LC-PDS
@@ -311,7 +324,7 @@ config MAC8390
 
 config MAC89x0
 	tristate "Macintosh CS89x0 based ethernet cards"
-	depends on NET_ETHERNET && MAC
+	depends on MAC
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards.  If you have a
 	  Nubus or LC-PDS network (Ethernet) card of this type, say Y and
@@ -324,7 +337,7 @@ config MAC89x0
 
 config MACSONIC
 	tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
-	depends on NET_ETHERNET && MAC
+	depends on MAC
 	---help---
 	  Support for NatSemi SONIC based Ethernet devices.  This includes
 	  the onboard Ethernet in many Quadras as well as some LC-PDS,
@@ -338,7 +351,7 @@ config MACSONIC
 
 config MACMACE
 	bool "Macintosh (AV) onboard MACE ethernet"
-	depends on NET_ETHERNET && MAC
+	depends on MAC
 	select CRC32
 	help
 	  Support for the onboard AMD 79C940 MACE Ethernet controller used in
@@ -348,7 +361,7 @@ config MACMACE
 
 config MVME147_NET
 	tristate "MVME147 (Lance) Ethernet support"
-	depends on NET_ETHERNET && MVME147
+	depends on MVME147
 	select CRC32
 	help
 	  Support for the on-board Ethernet interface on the Motorola MVME147
@@ -358,7 +371,7 @@ config MVME147_NET
 
 config MVME16x_NET
 	tristate "MVME16x Ethernet support"
-	depends on NET_ETHERNET && MVME16x
+	depends on MVME16x
 	help
 	  This is the driver for the Ethernet interface on the Motorola
 	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
@@ -367,7 +380,7 @@ config MVME16x_NET
 
 config BVME6000_NET
 	tristate "BVME6000 Ethernet support"
-	depends on NET_ETHERNET && BVME6000
+	depends on BVME6000
 	help
 	  This is the driver for the Ethernet interface on BVME4000 and
 	  BVME6000 VME boards.  Say Y here to include the driver for this chip
@@ -376,7 +389,7 @@ config BVME6000_NET
 
 config ATARILANCE
 	tristate "Atari Lance support"
-	depends on NET_ETHERNET && ATARI
+	depends on ATARI
 	help
 	  Say Y to include support for several Atari Ethernet adapters based
 	  on the AMD Lance chipset: RieblCard (with or without battery), or
@@ -384,7 +397,7 @@ config ATARILANCE
 
 config ATARI_BIONET
 	tristate "BioNet-100 support"
-	depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+	depends on ATARI && ATARI_ACSI && BROKEN
 	help
 	  Say Y to include support for BioData's BioNet-100 Ethernet adapter
 	  for the ACSI port. The driver works (has to work...) with a polled
@@ -392,7 +405,7 @@ config ATARI_BIONET
 
 config ATARI_PAMSNET
 	tristate "PAMsNet support"
-	depends on NET_ETHERNET && ATARI && ATARI_ACSI && BROKEN
+	depends on ATARI && ATARI_ACSI && BROKEN
 	help
 	  Say Y to include support for the PAMsNet Ethernet adapter for the
 	  ACSI port ("ACSI node"). The driver works (has to work...) with a
@@ -400,7 +413,7 @@ config ATARI_PAMSNET
 
 config SUN3LANCE
 	tristate "Sun3/Sun3x on-board LANCE support"
-	depends on NET_ETHERNET && (SUN3 || SUN3X)
+	depends on SUN3 || SUN3X
 	help
 	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
 	  featured an AMD Lance 10Mbit Ethernet controller on board; say Y
@@ -413,7 +426,7 @@ config SUN3LANCE
 
 config SUN3_82586
 	bool "Sun3 on-board Intel 82586 support"
-	depends on NET_ETHERNET && SUN3
+	depends on SUN3
 	help
 	  This driver enables support for the on-board Intel 82586 based
 	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
@@ -422,7 +435,7 @@ config SUN3_82586
 
 config HPLANCE
 	bool "HP on-board LANCE support"
-	depends on NET_ETHERNET && DIO
+	depends on DIO
 	select CRC32
 	help
 	  If you want to use the builtin "LANCE" Ethernet controller on an
@@ -430,21 +443,28 @@ config HPLANCE
 
 config LASI_82596
 	tristate "Lasi ethernet"
-	depends on NET_ETHERNET && GSC
+	depends on GSC
 	help
 	  Say Y here to support the builtin Intel 82596 ethernet controller
 	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
 
+config SNI_82596
+	tristate "SNI RM ethernet"
+	depends on NET_ETHERNET && SNI_RM
+	help
+	  Say Y here to support the on-board Intel 82596 ethernet controller
+	  built into SNI RM machines.
+
 config MIPS_JAZZ_SONIC
 	tristate "MIPS JAZZ onboard SONIC Ethernet support"
-	depends on NET_ETHERNET && MACH_JAZZ
+	depends on MACH_JAZZ
 	help
 	  This is the driver for the onboard card of MIPS Magnum 4000,
 	  Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
 
 config MIPS_AU1X00_ENET
 	bool "MIPS AU1000 Ethernet support"
-	depends on NET_ETHERNET && SOC_AU1X00
+	depends on SOC_AU1X00
 	select PHYLIB
 	select CRC32
 	help
@@ -453,11 +473,11 @@ config MIPS_AU1X00_ENET
 
 config NET_SB1250_MAC
 	tristate "SB1250 Ethernet support"
-	depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC
+	depends on SIBYTE_SB1xxx_SOC
 
 config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
-	depends on NET_ETHERNET && PCI && SGI_IP27
+	depends on PCI && SGI_IP27
 	select CRC32
 	select MII
 	help
@@ -487,7 +507,7 @@ config SGI_IOC3_ETH_HW_TX_CSUM
 
 config MIPS_SIM_NET
 	tristate "MIPS simulator Network device"
-	depends on NET_ETHERNET && MIPS_SIM
+	depends on MIPS_SIM
 	help
 	  The MIPSNET device is a simple Ethernet network device which is
 	  emulated by the MIPS Simulator.
@@ -495,11 +515,11 @@ config MIPS_SIM_NET
 
 config SGI_O2MACE_ETH
 	tristate "SGI O2 MACE Fast Ethernet support"
-	depends on NET_ETHERNET && SGI_IP32=y
+	depends on SGI_IP32=y
 
 config STNIC
 	tristate "National DP83902AV  support"
-	depends on NET_ETHERNET && SUPERH
+	depends on SUPERH
 	select CRC32
 	help
 	  Support for cards based on the National Semiconductor DP83902AV
@@ -511,7 +531,7 @@ config STNIC
 
 config SUNLANCE
 	tristate "Sun LANCE support"
-	depends on NET_ETHERNET && SBUS
+	depends on SBUS
 	select CRC32
 	help
 	  This driver supports the "le" interface present on all 32-bit Sparc
@@ -524,7 +544,7 @@ config SUNLANCE
 
 config HAPPYMEAL
 	tristate "Sun Happy Meal 10/100baseT support"
-	depends on NET_ETHERNET && (SBUS || PCI)
+	depends on SBUS || PCI
 	select CRC32
 	help
 	  This driver supports the "hme" interface present on most Ultra
@@ -537,7 +557,7 @@ config HAPPYMEAL
 
 config SUNBMAC
 	tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
-	depends on NET_ETHERNET && SBUS && EXPERIMENTAL
+	depends on SBUS && EXPERIMENTAL
 	select CRC32
 	help
 	  This driver supports the "be" interface available as an Sbus option.
@@ -548,7 +568,7 @@ config SUNBMAC
 
 config SUNQE
 	tristate "Sun QuadEthernet support"
-	depends on NET_ETHERNET && SBUS
+	depends on SBUS
 	select CRC32
 	help
 	  This driver supports the "qe" 10baseT Ethernet device, available as
@@ -560,7 +580,7 @@ config SUNQE
 
 config SUNGEM
 	tristate "Sun GEM support"
-	depends on NET_ETHERNET && PCI
+	depends on PCI
 	select CRC32
 	help
 	  Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0.  See also
@@ -568,7 +588,7 @@ config SUNGEM
 
 config CASSINI
 	tristate "Sun Cassini support"
-	depends on NET_ETHERNET && PCI
+	depends on PCI
 	select CRC32
 	help
 	  Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
@@ -576,7 +596,7 @@ config CASSINI
 
 config NET_VENDOR_3COM
 	bool "3COM cards"
-	depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
+	depends on ISA || EISA || MCA || PCI
 	help
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -736,7 +756,7 @@ config TYPHOON
 
 config LANCE
 	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
-	depends on NET_ETHERNET && ISA && ISA_DMA_API
+	depends on ISA && ISA_DMA_API
 	help
 	  If you have a network (Ethernet) card of this type, say Y and read
 	  the Ethernet-HOWTO, available from
@@ -748,7 +768,7 @@ config LANCE
 
 config NET_VENDOR_SMC
 	bool "Western Digital/SMC cards"
-	depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
+	depends on ISA || MCA || EISA || MAC
 	help
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -818,11 +838,27 @@ config ULTRA32
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called smc-ultra32.
 
+config SMC9194
+	tristate "SMC 9194 support"
+	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
+	select CRC32
+	---help---
+	  This is support for the SMC9xxx based Ethernet cards. Choose this
+	  option if you have a DELL laptop with the docking station, or
+	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
+	  into the kernel, and read the file
+	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
+	  available from <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>. The module
+	  will be called smc9194.
+
 config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
 	select MII
-	depends on NET_ETHERNET && (ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN)
+	depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || SOC_AU1X00 || BFIN
 	help
 	  This is a driver for SMC's 91x series of Ethernet chipsets,
 	  including the SMC91C94 and the SMC91C111. Say Y if you want it
@@ -836,26 +872,10 @@ config SMC91X
 	  module, say M here and read <file:Documentation/kbuild/modules.txt>
 	  as well as <file:Documentation/networking/net-modules.txt>.
 
-config SMC9194
-	tristate "SMC 9194 support"
-	depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
-	select CRC32
-	---help---
-	  This is support for the SMC9xxx based Ethernet cards. Choose this
-	  option if you have a DELL laptop with the docking station, or
-	  another SMC9192/9194 based chipset.  Say Y if you want it compiled
-	  into the kernel, and read the file
-	  <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here and read
-	  <file:Documentation/networking/net-modules.txt>. The module
-	  will be called smc9194.
-
 config NET_NETX
 	tristate "NetX Ethernet support"
 	select MII
-	depends on NET_ETHERNET && ARCH_NETX
+	depends on ARCH_NETX
 	help
 	  This is support for the Hilscher netX builtin Ethernet ports
 
@@ -865,7 +885,7 @@ config NET_NETX
 
 config DM9000
 	tristate "DM9000 support"
-	depends on (ARM || MIPS) && NET_ETHERNET
+	depends on ARM || BLACKFIN || MIPS
 	select CRC32
 	select MII
 	---help---
@@ -879,7 +899,7 @@ config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on NET_ETHERNET && ARCH_PXA
+	depends on ARCH_PXA
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -893,7 +913,7 @@ config SMC911X
 
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"
-	depends on NET_ETHERNET && ISA
+	depends on ISA
 	help
 	  If you have a network (Ethernet) card belonging to this class, such
 	  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
@@ -945,7 +965,7 @@ source "drivers/net/tulip/Kconfig"
 
 config AT1700
 	tristate "AT1700/1720 support (EXPERIMENTAL)"
-	depends on NET_ETHERNET && (ISA || MCA_LEGACY) && EXPERIMENTAL
+	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
@@ -958,7 +978,7 @@ config AT1700
 
 config DEPCA
 	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-	depends on NET_ETHERNET && (ISA || EISA || MCA)
+	depends on ISA || EISA || MCA
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
@@ -972,7 +992,7 @@ config DEPCA
 
 config HP100
 	tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support"
-	depends on NET_ETHERNET && (ISA || EISA || PCI)
+	depends on ISA || EISA || PCI
 	help
 	  If you have a network (Ethernet) card of this type, say Y and read
 	  the Ethernet-HOWTO, available from
@@ -984,7 +1004,7 @@ config HP100
 
 config NET_ISA
 	bool "Other ISA cards"
-	depends on NET_ETHERNET && ISA
+	depends on ISA
 	---help---
 	  If your network (Ethernet) card hasn't been mentioned yet and its
 	  bus system (that's the way the cards talks to the other components
@@ -1147,7 +1167,7 @@ config SEEQ8005
 
 config NE2_MCA
 	tristate "NE/2 (ne2000 MCA version) support"
-	depends on NET_ETHERNET && MCA_LEGACY
+	depends on MCA_LEGACY
 	select CRC32
 	help
 	  If you have a network (Ethernet) card of this type, say Y and read
@@ -1160,7 +1180,7 @@ config NE2_MCA
 
 config IBMLANA
 	tristate "IBM LAN Adapter/A support"
-	depends on NET_ETHERNET && MCA && MCA_LEGACY
+	depends on MCA && MCA_LEGACY
 	---help---
 	  This is a Micro Channel Ethernet adapter.  You need to set
 	  CONFIG_MCA to use this driver.  It is both available as an in-kernel
@@ -1176,7 +1196,7 @@ config IBMLANA
 
 config IBMVETH
 	tristate "IBM LAN Virtual Ethernet support"
-	depends on NET_ETHERNET && PPC_PSERIES
+	depends on PPC_PSERIES
 	---help---
 	  This driver supports virtual ethernet adapters on newer IBM iSeries
 	  and pSeries systems.
@@ -1257,7 +1277,7 @@ config IBM_EMAC_TAH
 
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"
-	depends on NET_ETHERNET && (ISA || EISA || PCI)
+	depends on ISA || EISA || PCI
 	help
 	  This is another class of network cards which attach directly to the
 	  bus. If you have one of those, say Y and read the Ethernet-HOWTO,
@@ -1313,6 +1333,7 @@ config AMD8111_ETH
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called amd8111e.
+
 config AMD8111E_NAPI
 	bool "Enable NAPI support"
 	depends on AMD8111_ETH
@@ -1778,7 +1799,7 @@ config SC92031
 
 config NET_POCKET
 	bool "Pocket and portable adapters"
-	depends on NET_ETHERNET && PARPORT
+	depends on PARPORT
 	---help---
 	  Cute little network (Ethernet) devices which attach to the parallel
 	  port ("pocket adapters"), commonly used with laptops. If you have
@@ -1847,14 +1868,14 @@ config DE620
 
 config SGISEEQ
 	tristate "SGI Seeq ethernet controller support"
-	depends on NET_ETHERNET && SGI_IP22
+	depends on SGI_IP22
 	help
 	  Say Y here if you have an Seeq based Ethernet network card. This is
 	  used in many Silicon Graphics machines.
 
 config DECLANCE
 	tristate "DEC LANCE ethernet controller support"
-	depends on NET_ETHERNET && MACH_DECSTATION
+	depends on MACH_DECSTATION
 	select CRC32
 	help
 	  This driver is for the series of Ethernet controllers produced by
@@ -1884,7 +1905,7 @@ config FEC2
 
 config NE_H8300
 	tristate "NE2000 compatible support for H8/300"
-	depends on H8300 && NET_ETHERNET
+	depends on H8300
 	help
 	  Say Y here if you want to use the NE2000 compatible
 	  controller on the Renesas H8/300 processor.
@@ -1892,7 +1913,7 @@ config NE_H8300
 source "drivers/net/fec_8xx/Kconfig"
 source "drivers/net/fs_enet/Kconfig"
 
-endmenu
+endif # NET_ETHERNET
 
 #
 #	Gigabit Ethernet
@@ -2101,7 +2122,7 @@ config SKGE
 	  with better performance and more complete ethtool support.
 
 	  It does not support the link failover and network management 
-	  features that "portable" vendor supplied sk98lin driver does.
+	  features available in the hardware.
 
 	  This driver supports adapters based on the original Yukon chipset:
 	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
@@ -2114,7 +2135,7 @@ config SKGE
 	  will be called skge.  This is recommended.
 
 config SKY2
-	tristate "SysKonnect Yukon2 support (EXPERIMENTAL)"
+	tristate "SysKonnect Yukon2 support"
 	depends on PCI
 	select CRC32
 	---help---
@@ -2129,92 +2150,15 @@ config SKY2
 	  To compile this driver as a module, choose M here: the module
 	  will be called sky2.  This is recommended.
 
-config SK98LIN
-	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
-	depends on PCI
-	---help---
-	  Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-	  compliant Gigabit Ethernet Adapter.
+config SKY2_DEBUG
+       bool "Debugging interface"
+       depends on SKY2 && DEBUG_FS
+       help
+	 This option adds the ability to dump driver state for debugging.
+	 The file debugfs/sky2/ethX displays the state of the internal
+	 transmit and receive rings.
 
-	  This driver supports the original Yukon chipset. This driver is
-	  deprecated and will be removed from the kernel in the near future,
-	  it has been replaced by the skge driver. skge is cleaner and
-	  seems to work better.
-
-	  This driver does not support the newer Yukon2 chipset. A separate
-	  driver, sky2, is provided to support Yukon2-based adapters.
-
-	  The following adapters are supported by this driver:
-	    - 3Com 3C940 Gigabit LOM Ethernet Adapter
-	    - 3Com 3C941 Gigabit LOM Ethernet Adapter
-	    - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
-	    - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
-	    - EG1032 v2 Instant Gigabit Network Adapter
-	    - EG1064 v2 Instant Gigabit Network Adapter
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
-	    - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
-	    - Marvell RDK-8001 Adapter
-	    - Marvell RDK-8002 Adapter
-	    - Marvell RDK-8003 Adapter
-	    - Marvell RDK-8004 Adapter
-	    - Marvell RDK-8006 Adapter
-	    - Marvell RDK-8007 Adapter
-	    - Marvell RDK-8008 Adapter
-	    - Marvell RDK-8009 Adapter
-	    - Marvell RDK-8010 Adapter
-	    - Marvell RDK-8011 Adapter
-	    - Marvell RDK-8012 Adapter
-	    - Marvell RDK-8052 Adapter
-	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
-	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
-	    - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
-	    - SK-9521 10/100/1000Base-T Adapter
-	    - SK-9521 V2.0 10/100/1000Base-T Adapter
-	    - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
-	    - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
-	    - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
-	    - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
-	    - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
-	    - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
-	    - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
-	    - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-	    - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
-	    - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-	    - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
-	    - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-	    - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
-	    - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
-	    - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
-	    - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
-	    - SMC EZ Card 1000 (SMC9452TXV.2)
-	  
-	  The adapters support Jumbo Frames.
-	  The dual link adapters support link-failover and dual port features.
-	  Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support 
-	  the scatter-gather functionality with sendfile(). Please refer to 
-	  <file:Documentation/networking/sk98lin.txt> for more information about
-	  optional driver parameters.
-	  Questions concerning this driver may be addressed to:
-	      <linux@syskonnect.de>
-	  
-	  If you want to compile this driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>. The module will
-	  be called sk98lin. This is recommended.
+	 If unsure, say N.
 
 config VIA_VELOCITY
 	tristate "VIA Velocity support"
@@ -2264,6 +2208,16 @@ config TSI108_ETH
 	     To compile this driver as a module, choose M here: the module
 	     will be called tsi108_eth.
 
+config GELIC_NET
+	tristate "PS3 Gigabit Ethernet driver"
+	depends on PPC_PS3
+	help
+	  This driver supports the network device on the PS3 game
+	  console.  This driver has built-in support for Ethernet.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ps3_gelic.
+
 config GIANFAR
 	tristate "Gianfar Ethernet"
 	depends on 85xx || 83xx || PPC_86xx
@@ -2303,7 +2257,7 @@ config UGETH_TX_ON_DEMAND
 
 config MV643XX_ETH
 	tristate "MV-643XX Ethernet support"
-	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MV64X60 || MOMENCO_OCELOT_3 || (PPC_MULTIPLATFORM && PPC32)
+	depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32)
 	select MII
 	help
 	  This driver supports the gigabit Ethernet on the Marvell MV643XX
@@ -2838,6 +2792,19 @@ config PPPOATM
 	  which can lead to bad results if the ATM peer loses state and
 	  changes its encapsulation unilaterally.
 
+config PPPOL2TP
+	tristate "PPP over L2TP (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && PPP
+	help
+	  Support for PPP-over-L2TP socket family. L2TP is a protocol
+	  used by ISPs and enterprises to tunnel PPP traffic over UDP
+	  tunnels. L2TP is replacing PPTP for VPN uses.
+
+	  This kernel component handles only L2TP data packets: a
+	  userland daemon handles L2TP the control protocol (tunnel
+	  and session setup). One such daemon is OpenL2TP
+	  (http://openl2tp.sourceforge.net/).
+
 config SLIP
 	tristate "SLIP (serial line) support"
 	---help---
@@ -2948,8 +2915,6 @@ config NETCONSOLE
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
-endif #NETDEVICES
-
 config NETPOLL
 	def_bool NETCONSOLE
 
@@ -2961,4 +2926,4 @@ config NETPOLL_TRAP
 config NET_POLL_CONTROLLER
 	def_bool NETPOLL
 
-endmenu
+endif # NETDEVICES
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a77affa4f6e6..a2241e6e1457 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -60,10 +60,11 @@ obj-$(CONFIG_TIGON3) += tg3.o
 obj-$(CONFIG_BNX2) += bnx2.o
 spidernet-y += spider_net.o spider_net_ethtool.o
 obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
+obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
+ps3_gelic-objs += ps3_gelic_net.o
 obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
-obj-$(CONFIG_SK98LIN) += sk98lin/
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
@@ -107,6 +108,7 @@ obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
 obj-$(CONFIG_B44) += b44.o
 obj-$(CONFIG_FORCEDETH) += forcedeth.o
 obj-$(CONFIG_NE_H8300) += ne-h8300.o
+obj-$(CONFIG_AX88796) += ax88796.o
 
 obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
 obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
@@ -119,6 +121,7 @@ obj-$(CONFIG_PPP_DEFLATE) += ppp_deflate.o
 obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
 obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
 obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
+obj-$(CONFIG_PPPOL2TP) += pppox.o pppol2tp.o
 
 obj-$(CONFIG_SLIP) += slip.o
 obj-$(CONFIG_SLHC) += slhc.o
@@ -157,6 +160,7 @@ obj-$(CONFIG_ELPLUS) += 3c505.o
 obj-$(CONFIG_AC3200) += ac3200.o 8390.o
 obj-$(CONFIG_APRICOT) += 82596.o
 obj-$(CONFIG_LASI_82596) += lasi_82596.o
+obj-$(CONFIG_SNI_82596) += sni_82596.o
 obj-$(CONFIG_MVME16x_NET) += 82596.o
 obj-$(CONFIG_BVME6000_NET) += 82596.o
 obj-$(CONFIG_SC92031) += sc92031.o
diff --git a/drivers/net/a2065.c b/drivers/net/a2065.c
index 81d5a374042a..a45de6975bfe 100644
--- a/drivers/net/a2065.c
+++ b/drivers/net/a2065.c
@@ -322,9 +322,9 @@ static int lance_rx (struct net_device *dev)
 
 			skb_reserve (skb, 2);		/* 16 byte align */
 			skb_put (skb, len);		/* make room */
-			eth_copy_and_sum(skb,
+			skb_copy_to_linear_data(skb,
 					 (unsigned char *)&(ib->rx_buf [lp->rx_new][0]),
-					 len, 0);
+					 len);
 			skb->protocol = eth_type_trans (skb, dev);
 			netif_rx (skb);
 			dev->last_rx = jiffies;
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 04382f979c99..b78a4e5ceeb2 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -159,10 +159,6 @@ static struct pci_device_id acenic_pci_tbl[] = {
 };
 MODULE_DEVICE_TABLE(pci, acenic_pci_tbl);
 
-#ifndef SET_NETDEV_DEV
-#define SET_NETDEV_DEV(net, pdev)	do{} while(0)
-#endif
-
 #define ace_sync_irq(irq)	synchronize_irq(irq)
 
 #ifndef offset_in_page
diff --git a/drivers/net/ariadne.c b/drivers/net/ariadne.c
index a241ae7855a3..bc5a38a6705f 100644
--- a/drivers/net/ariadne.c
+++ b/drivers/net/ariadne.c
@@ -746,7 +746,7 @@ static int ariadne_rx(struct net_device *dev)
 
 	    skb_reserve(skb,2);		/* 16 byte align */
 	    skb_put(skb,pkt_len);	/* Make room */
-	    eth_copy_and_sum(skb, (char *)priv->rx_buff[entry], pkt_len,0);
+	    skb_copy_to_linear_data(skb, (char *)priv->rx_buff[entry], pkt_len);
 	    skb->protocol=eth_type_trans(skb,dev);
 #if 0
 	    printk(KERN_DEBUG "RX pkt type 0x%04x from ",
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 678e4f48d36b..5bf2d33887ac 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -4,7 +4,7 @@
 #
 config ARM_AM79C961A
 	bool "ARM EBSA110 AM79C961A support"
-	depends on NET_ETHERNET && ARM && ARCH_EBSA110
+	depends on ARM && ARCH_EBSA110
 	select CRC32
 	help
 	  If you wish to compile a kernel for the EBSA-110, then you should
@@ -12,21 +12,21 @@ config ARM_AM79C961A
 
 config ARM_ETHER1
 	tristate "Acorn Ether1 support"
-	depends on NET_ETHERNET && ARM && ARCH_ACORN
+	depends on ARM && ARCH_ACORN
 	help
 	  If you have an Acorn system with one of these (AKA25) network cards,
 	  you should say Y to this option if you wish to use it with Linux.
 
 config ARM_ETHER3
 	tristate "Acorn/ANT Ether3 support"
-	depends on NET_ETHERNET && ARM && ARCH_ACORN
+	depends on ARM && ARCH_ACORN
 	help
 	  If you have an Acorn system with one of these network cards, you
 	  should say Y to this option if you wish to use it with Linux.
 
 config ARM_ETHERH
 	tristate "I-cubed EtherH/ANT EtherM support"
-	depends on NET_ETHERNET && ARM && ARCH_ACORN
+	depends on ARM && ARCH_ACORN
 	select CRC32
 	help
 	  If you have an Acorn system with one of these network cards, you
@@ -34,7 +34,7 @@ config ARM_ETHERH
 
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
-	depends on NET_ETHERNET && ARM && ARCH_AT91RM9200
+	depends on ARM && ARCH_AT91RM9200
 	select MII
 	help
 	  If you wish to compile a kernel for the AT91RM9200 and enable
@@ -42,7 +42,7 @@ config ARM_AT91_ETHER
 
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
-	depends on NET_ETHERNET && ARM && ARCH_EP93XX
+	depends on ARM && ARCH_EP93XX
 	help
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.
 	  Say Y if you are building a kernel for EP93xx based devices.
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 2438c5bff237..f6ece1d43f6e 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -258,7 +258,7 @@ static int ep93xx_rx(struct net_device *dev, int *budget)
 			skb_reserve(skb, 2);
 			dma_sync_single(NULL, ep->descs->rdesc[entry].buf_addr,
 						length, DMA_FROM_DEVICE);
-			eth_copy_and_sum(skb, ep->rx_buf[entry], length, 0);
+			skb_copy_to_linear_data(skb, ep->rx_buf[entry], length);
 			skb_put(skb, length);
 			skb->protocol = eth_type_trans(skb, dev);
 
diff --git a/drivers/net/atari_pamsnet.c b/drivers/net/atari_pamsnet.c
index 54714409a09b..f7356374a2e7 100644
--- a/drivers/net/atari_pamsnet.c
+++ b/drivers/net/atari_pamsnet.c
@@ -295,10 +295,7 @@ int if_up = 0;
 /* Setup the DMA counter */
 
 static void
-setup_dma (address, rw_flag, num_blocks)
-	void *address;
-	unsigned rw_flag;
-	int num_blocks;
+setup_dma (void *address, unsigned rw_flag, int num_blocks)
 {
 	WRITEMODE((unsigned) rw_flag          | DMA_FDC | SEC_COUNT | REG_ACSI |
 		  A1);
@@ -317,9 +314,7 @@ setup_dma (address, rw_flag, num_blocks)
 /* Send the first byte of an command block */
 
 static int
-send_first (target, byte)
-	int target;
-	unsigned char byte;
+send_first (int target, unsigned char byte)
 {
 	rw = READ;
 	acsi_delay_end(COMMAND_DELAY);
@@ -338,10 +333,7 @@ send_first (target, byte)
 /* Send the rest of an command block */
 
 static int
-send_1_5 (lun, command, dma)
-	int lun;
-	unsigned char *command;
-	int dma;
+send_1_5 (int lun, unsigned char *command, int dma)
 {
 	int i, j;
 
@@ -371,8 +363,7 @@ get_status (void)
 /* Calculate the number of received bytes */
 
 static int
-calc_received (start_address)
-	void *start_address;
+calc_received (void *start_address)
 {
 	return (int)(
 		(((unsigned long)DMAHIGH << 16) | ((unsigned)DMAMID << 8) | DMALOW)
@@ -384,8 +375,7 @@ calc_received (start_address)
 /* start() starts the PAM's DMA adaptor */
 
 static void
-start (target)
-	int target;
+start (int target)
 {
 	send_first(target, START);
 }
@@ -393,8 +383,7 @@ start (target)
 /* stop() stops the PAM's DMA adaptor and returns a value of zero in case of success */
 
 static int
-stop (target)
-	int target;
+stop (int target)
 {
 	int ret = -1;
 	unsigned char cmd_buffer[5];
@@ -415,8 +404,7 @@ bad:
 /* testpkt() returns the number of received packets waiting in the queue */
 
 static int
-testpkt(target)
-	int target;
+testpkt(int target)
 {
 	int ret = -1;
 
@@ -431,9 +419,7 @@ bad:
 /* Please note: The buffer is for internal use only but must be defined!   */
 
 static int
-inquiry (target, buffer)
-	int target;
-	unsigned char *buffer;
+inquiry (int target, unsigned char *buffer)
 {
 	int ret = -1;
 	unsigned char *vbuffer = phys_to_virt((unsigned long)buffer);
@@ -468,9 +454,7 @@ bad:
  */
 
 static HADDR
-*read_hw_addr(target, buffer)
-	int target;
-	unsigned char *buffer;
+*read_hw_addr(int target, unsigned char *buffer)
 {
 	HADDR *ret = 0;
 	unsigned char cmd_buffer[5];
@@ -491,9 +475,7 @@ bad:
 }
 
 static irqreturn_t
-pamsnet_intr(irq, data, fp)
-	int irq;
-	void *data;
+pamsnet_intr(int irq, void *data)
 {
 	return IRQ_HANDLED;
 }
@@ -501,9 +483,7 @@ pamsnet_intr(irq, data, fp)
 /* receivepkt() loads a packet to a given buffer and returns its length */
 
 static int
-receivepkt (target, buffer)
-	int target;
-	unsigned char *buffer;
+receivepkt (int target, unsigned char *buffer)
 {
 	int ret = -1;
 	unsigned char cmd_buffer[5];
@@ -526,10 +506,7 @@ bad:
              successfully */
 
 static int
-sendpkt (target, buffer, length)
-	int target;
-	unsigned char *buffer;
-	int length;
+sendpkt (int target, unsigned char *buffer, int length)
 {
 	int ret = -1;
 	unsigned char cmd_buffer[5];
@@ -665,7 +642,8 @@ struct net_device * __init pamsnet_probe (int unit)
    there is non-reboot way to recover if something goes wrong.
  */
 static int
-pamsnet_open(struct net_device *dev) {
+pamsnet_open(struct net_device *dev)
+{
 	struct net_local *lp = netdev_priv(dev);
 
 	if (pamsnet_debug > 0)
@@ -694,7 +672,8 @@ pamsnet_open(struct net_device *dev) {
 }
 
 static int
-pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev) {
+pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
 	struct net_local *lp = netdev_priv(dev);
 	unsigned long flags;
 
@@ -741,7 +720,8 @@ pamsnet_send_packet(struct sk_buff *skb, struct net_device *dev) {
 /* We have a good packet(s), get it/them out of the buffers.
  */
 static void
-pamsnet_poll_rx(struct net_device *dev) {
+pamsnet_poll_rx(struct net_device *dev)
+{
 	struct net_local *lp = netdev_priv(dev);
 	int boguscount;
 	int pkt_len;
@@ -816,7 +796,8 @@ pamsnet_poll_rx(struct net_device *dev) {
  * passes them to the higher layers and restarts the timer.
  */
 static void
-pamsnet_tick(unsigned long data) {
+pamsnet_tick(unsigned long data)
+{
 	struct net_device	 *dev = (struct net_device *)data;
 	struct net_local *lp = netdev_priv(dev);
 
@@ -832,7 +813,8 @@ pamsnet_tick(unsigned long data) {
 /* The inverse routine to pamsnet_open().
  */
 static int
-pamsnet_close(struct net_device *dev) {
+pamsnet_close(struct net_device *dev)
+{
 	struct net_local *lp = netdev_priv(dev);
 
 	if (pamsnet_debug > 0)
diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h
index b1c6034e68fa..df4c1a0071aa 100644
--- a/drivers/net/atl1/atl1.h
+++ b/drivers/net/atl1/atl1.h
@@ -210,7 +210,6 @@ struct atl1_hw {
 	u16 phy_spd_default;
 
 	u16 dev_rev;
-	u8 revision_id;
 
 	/* spi flash */
 	u8 flash_vendor;
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 6862c11ff864..501919eb7f5e 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -118,10 +118,6 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
 {
 	struct atl1_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
-	struct pci_dev *pdev = adapter->pdev;
-
-	/* PCI config space info */
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
 
 	hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
 	hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
@@ -634,14 +630,13 @@ static void atl1_intr_tx(struct atl1_adapter *adapter)
 	struct atl1_buffer *buffer_info;
 	u16 sw_tpd_next_to_clean;
 	u16 cmb_tpd_next_to_clean;
-	u8 update = 0;
 
 	sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
 	cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);
 
 	while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
 		struct tx_packet_desc *tpd;
-		update = 1;
+
 		tpd = ATL1_TPD_DESC(tpd_ring, sw_tpd_next_to_clean);
 		buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
 		if (buffer_info->dma) {
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index c27cfcef45fa..e86b3691765b 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1205,8 +1205,8 @@ static int au1000_rx(struct net_device *dev)
 				continue;
 			}
 			skb_reserve(skb, 2);	/* 16 byte IP header align */
-			eth_copy_and_sum(skb,
-				(unsigned char *)pDB->vaddr, frmlen, 0);
+			skb_copy_to_linear_data(skb,
+				(unsigned char *)pDB->vaddr, frmlen);
 			skb_put(skb, frmlen);
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_rx(skb);	/* pass the packet to upper layers */
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
new file mode 100644
index 000000000000..d19874bf0706
--- /dev/null
+++ b/drivers/net/ax88796.c
@@ -0,0 +1,952 @@
+/* drivers/net/ax88796.c
+ *
+ * Copyright 2005,2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Asix AX88796 10/100 Ethernet controller support
+ *	Based on ne.c, by Donald Becker, et-al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/isapnp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+
+#include <net/ax88796.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+static int phy_debug = 0;
+
+/* Rename the lib8390.c functions to show that they are in this driver */
+#define __ei_open       ax_ei_open
+#define __ei_close      ax_ei_close
+#define __ei_poll	ax_ei_poll
+#define __ei_tx_timeout ax_ei_tx_timeout
+#define __ei_interrupt  ax_ei_interrupt
+#define ____alloc_ei_netdev ax__alloc_ei_netdev
+#define __NS8390_init   ax_NS8390_init
+
+/* force unsigned long back to 'void __iomem *' */
+#define ax_convert_addr(_a) ((void __force __iomem *)(_a))
+
+#define ei_inb(_a)	readb(ax_convert_addr(_a))
+#define ei_outb(_v, _a) writeb(_v, ax_convert_addr(_a))
+
+#define ei_inb_p(_a)	ei_inb(_a)
+#define ei_outb_p(_v, _a) ei_outb(_v, _a)
+
+/* define EI_SHIFT() to take into account our register offsets */
+#define EI_SHIFT(x)     (ei_local->reg_offset[(x)])
+
+/* Ensure we have our RCR base value */
+#define AX88796_PLATFORM
+
+static unsigned char version[] = "ax88796.c: Copyright 2005,2007 Simtec Electronics\n";
+
+#include "lib8390.c"
+
+#define DRV_NAME "ax88796"
+#define DRV_VERSION "1.00"
+
+/* from ne.c */
+#define NE_CMD		EI_SHIFT(0x00)
+#define NE_RESET	EI_SHIFT(0x1f)
+#define NE_DATAPORT	EI_SHIFT(0x10)
+
+#define NE1SM_START_PG	0x20	/* First page of TX buffer */
+#define NE1SM_STOP_PG 	0x40	/* Last page +1 of RX ring */
+#define NESM_START_PG	0x40	/* First page of TX buffer */
+#define NESM_STOP_PG	0x80	/* Last page +1 of RX ring */
+
+/* device private data */
+
+struct ax_device {
+	struct timer_list	 mii_timer;
+	spinlock_t		 mii_lock;
+	struct mii_if_info	 mii;
+
+	u32			 msg_enable;
+	void __iomem		*map2;
+	struct platform_device	*dev;
+	struct resource		*mem;
+	struct resource		*mem2;
+	struct ax_plat_data	*plat;
+
+	unsigned char		 running;
+	unsigned char		 resume_open;
+
+	u32			 reg_offsets[0x20];
+};
+
+static inline struct ax_device *to_ax_dev(struct net_device *dev)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	return (struct ax_device *)(ei_local+1);
+}
+
+/* ax_initial_check
+ *
+ * do an initial probe for the card to check wether it exists
+ * and is functional
+ */
+
+static int ax_initial_check(struct net_device *dev)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	void __iomem *ioaddr = ei_local->mem;
+	int reg0;
+	int regd;
+
+	reg0 = ei_inb(ioaddr);
+	if (reg0 == 0xFF)
+		return -ENODEV;
+
+	ei_outb(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);
+	regd = ei_inb(ioaddr + 0x0d);
+	ei_outb(0xff, ioaddr + 0x0d);
+	ei_outb(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);
+	ei_inb(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */
+	if (ei_inb(ioaddr + EN0_COUNTER0) != 0) {
+		ei_outb(reg0, ioaddr);
+		ei_outb(regd, ioaddr + 0x0d);	/* Restore the old values. */
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/* Hard reset the card.  This used to pause for the same period that a
+   8390 reset command required, but that shouldn't be necessary. */
+
+static void ax_reset_8390(struct net_device *dev)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	unsigned long reset_start_time = jiffies;
+	void __iomem *addr = (void __iomem *)dev->base_addr;
+
+	if (ei_debug > 1)
+		printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
+
+	ei_outb(ei_inb(addr + NE_RESET), addr + NE_RESET);
+
+	ei_status.txing = 0;
+	ei_status.dmaing = 0;
+
+	/* This check _should_not_ be necessary, omit eventually. */
+	while ((ei_inb(addr + EN0_ISR) & ENISR_RESET) == 0) {
+		if (jiffies - reset_start_time > 2*HZ/100) {
+			printk(KERN_WARNING "%s: %s did not complete.\n",
+			       __FUNCTION__, dev->name);
+			break;
+		}
+	}
+
+	ei_outb(ENISR_RESET, addr + EN0_ISR);	/* Ack intr. */
+}
+
+
+static void ax_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+			    int ring_page)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	void __iomem *nic_base = ei_local->mem;
+
+	/* This *shouldn't* happen. If it does, it's the last thing you'll see */
+	if (ei_status.dmaing) {
+		printk(KERN_EMERG "%s: DMAing conflict in %s [DMAstat:%d][irqlock:%d].\n",
+			dev->name, __FUNCTION__,
+		       ei_status.dmaing, ei_status.irqlock);
+		return;
+	}
+
+	ei_status.dmaing |= 0x01;
+	ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+	ei_outb(sizeof(struct e8390_pkt_hdr), nic_base + EN0_RCNTLO);
+	ei_outb(0, nic_base + EN0_RCNTHI);
+	ei_outb(0, nic_base + EN0_RSARLO);		/* On page boundary */
+	ei_outb(ring_page, nic_base + EN0_RSARHI);
+	ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+	if (ei_status.word16)
+		readsw(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
+	else
+		readsb(nic_base + NE_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr));
+
+	ei_outb(ENISR_RDC, nic_base + EN0_ISR);	/* Ack intr. */
+	ei_status.dmaing &= ~0x01;
+
+	le16_to_cpus(&hdr->count);
+}
+
+
+/* Block input and output, similar to the Crynwr packet driver.  If you
+   are porting to a new ethercard, look at the packet driver source for hints.
+   The NEx000 doesn't share the on-board packet memory -- you have to put
+   the packet out through the "remote DMA" dataport using ei_outb. */
+
+static void ax_block_input(struct net_device *dev, int count,
+			   struct sk_buff *skb, int ring_offset)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	void __iomem *nic_base = ei_local->mem;
+	char *buf = skb->data;
+
+	if (ei_status.dmaing) {
+		printk(KERN_EMERG "%s: DMAing conflict in ax_block_input "
+			"[DMAstat:%d][irqlock:%d].\n",
+			dev->name, ei_status.dmaing, ei_status.irqlock);
+		return;
+	}
+
+	ei_status.dmaing |= 0x01;
+
+	ei_outb(E8390_NODMA+E8390_PAGE0+E8390_START, nic_base+ NE_CMD);
+	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
+	ei_outb(count >> 8, nic_base + EN0_RCNTHI);
+	ei_outb(ring_offset & 0xff, nic_base + EN0_RSARLO);
+	ei_outb(ring_offset >> 8, nic_base + EN0_RSARHI);
+	ei_outb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
+
+	if (ei_status.word16) {
+		readsw(nic_base + NE_DATAPORT, buf, count >> 1);
+		if (count & 0x01)
+			buf[count-1] = ei_inb(nic_base + NE_DATAPORT);
+
+	} else {
+		readsb(nic_base + NE_DATAPORT, buf, count);
+	}
+
+	ei_status.dmaing &= ~1;
+}
+
+static void ax_block_output(struct net_device *dev, int count,
+			    const unsigned char *buf, const int start_page)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	void __iomem *nic_base = ei_local->mem;
+	unsigned long dma_start;
+
+	/* Round the count up for word writes.  Do we need to do this?
+	   What effect will an odd byte count have on the 8390?
+	   I should check someday. */
+
+	if (ei_status.word16 && (count & 0x01))
+		count++;
+
+	/* This *shouldn't* happen. If it does, it's the last thing you'll see */
+	if (ei_status.dmaing) {
+		printk(KERN_EMERG "%s: DMAing conflict in %s."
+			"[DMAstat:%d][irqlock:%d]\n",
+			dev->name, __FUNCTION__,
+		       ei_status.dmaing, ei_status.irqlock);
+		return;
+	}
+
+	ei_status.dmaing |= 0x01;
+	/* We should already be in page 0, but to be safe... */
+	ei_outb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
+
+	ei_outb(ENISR_RDC, nic_base + EN0_ISR);
+
+	/* Now the normal output. */
+	ei_outb(count & 0xff, nic_base + EN0_RCNTLO);
+	ei_outb(count >> 8,   nic_base + EN0_RCNTHI);
+	ei_outb(0x00, nic_base + EN0_RSARLO);
+	ei_outb(start_page, nic_base + EN0_RSARHI);
+
+	ei_outb(E8390_RWRITE+E8390_START, nic_base + NE_CMD);
+	if (ei_status.word16) {
+		writesw(nic_base + NE_DATAPORT, buf, count>>1);
+	} else {
+		writesb(nic_base + NE_DATAPORT, buf, count);
+	}
+
+	dma_start = jiffies;
+
+	while ((ei_inb(nic_base + EN0_ISR) & ENISR_RDC) == 0) {
+		if (jiffies - dma_start > 2*HZ/100) {		/* 20ms */
+			printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name);
+			ax_reset_8390(dev);
+			ax_NS8390_init(dev,1);
+			break;
+		}
+	}
+
+	ei_outb(ENISR_RDC, nic_base + EN0_ISR);	/* Ack intr. */
+	ei_status.dmaing &= ~0x01;
+	return;
+}
+
+/* definitions for accessing MII/EEPROM interface */
+
+#define AX_MEMR			EI_SHIFT(0x14)
+#define AX_MEMR_MDC		(1<<0)
+#define AX_MEMR_MDIR		(1<<1)
+#define AX_MEMR_MDI		(1<<2)
+#define AX_MEMR_MDO		(1<<3)
+#define AX_MEMR_EECS		(1<<4)
+#define AX_MEMR_EEI		(1<<5)
+#define AX_MEMR_EEO		(1<<6)
+#define AX_MEMR_EECLK		(1<<7)
+
+/* ax_mii_ei_outbits
+ *
+ * write the specified set of bits to the phy
+*/
+
+static void
+ax_mii_ei_outbits(struct net_device *dev, unsigned int bits, int len)
+{
+	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
+	unsigned int memr;
+
+	/* clock low, data to output mode */
+	memr = ei_inb(memr_addr);
+	memr &= ~(AX_MEMR_MDC | AX_MEMR_MDIR);
+	ei_outb(memr, memr_addr);
+
+	for (len--; len >= 0; len--) {
+		if (bits & (1 << len))
+			memr |= AX_MEMR_MDO;
+		else
+			memr &= ~AX_MEMR_MDO;
+
+		ei_outb(memr, memr_addr);
+
+		/* clock high */
+
+		ei_outb(memr | AX_MEMR_MDC, memr_addr);
+		udelay(1);
+
+		/* clock low */
+		ei_outb(memr, memr_addr);
+	}
+
+	/* leaves the clock line low, mdir input */
+	memr |= AX_MEMR_MDIR;
+	ei_outb(memr, (void __iomem *)dev->base_addr + AX_MEMR);
+}
+
+/* ax_phy_ei_inbits
+ *
+ * read a specified number of bits from the phy
+*/
+
+static unsigned int
+ax_phy_ei_inbits(struct net_device *dev, int no)
+{
+	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
+	unsigned int memr;
+	unsigned int result = 0;
+
+	/* clock low, data to input mode */
+	memr = ei_inb(memr_addr);
+	memr &= ~AX_MEMR_MDC;
+	memr |= AX_MEMR_MDIR;
+	ei_outb(memr, memr_addr);
+
+	for (no--; no >= 0; no--) {
+		ei_outb(memr | AX_MEMR_MDC, memr_addr);
+
+		udelay(1);
+
+		if (ei_inb(memr_addr) & AX_MEMR_MDI)
+			result |= (1<<no);
+
+		ei_outb(memr, memr_addr);
+	}
+
+	return result;
+}
+
+/* ax_phy_issueaddr
+ *
+ * use the low level bit shifting routines to send the address
+ * and command to the specified phy
+*/
+
+static void
+ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
+{
+	if (phy_debug)
+		pr_debug("%s: dev %p, %04x, %04x, %d\n",
+			__FUNCTION__, dev, phy_addr, reg, opc);
+
+	ax_mii_ei_outbits(dev, 0x3f, 6);	/* pre-amble */
+	ax_mii_ei_outbits(dev, 1, 2);		/* frame-start */
+	ax_mii_ei_outbits(dev, opc, 2);		/* op code */
+	ax_mii_ei_outbits(dev, phy_addr, 5);	/* phy address */
+	ax_mii_ei_outbits(dev, reg, 5);		/* reg address */
+}
+
+static int
+ax_phy_read(struct net_device *dev, int phy_addr, int reg)
+{
+	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	unsigned long flags;
+ 	unsigned int result;
+
+      	spin_lock_irqsave(&ei_local->page_lock, flags);
+
+	ax_phy_issueaddr(dev, phy_addr, reg, 2);
+
+	result = ax_phy_ei_inbits(dev, 17);
+	result &= ~(3<<16);
+
+      	spin_unlock_irqrestore(&ei_local->page_lock, flags);
+
+	if (phy_debug)
+		pr_debug("%s: %04x.%04x => read %04x\n", __FUNCTION__,
+			 phy_addr, reg, result);
+
+	return result;
+}
+
+static void
+ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
+{
+	struct ei_device *ei = (struct ei_device *) netdev_priv(dev);
+	unsigned long flags;
+
+	printk(KERN_DEBUG "%s: %p, %04x, %04x %04x\n",
+	       __FUNCTION__, dev, phy_addr, reg, value);
+
+      	spin_lock_irqsave(&ei->page_lock, flags);
+
+	ax_phy_issueaddr(dev, phy_addr, reg, 1);
+	ax_mii_ei_outbits(dev, 2, 2);		/* send TA */
+	ax_mii_ei_outbits(dev, value, 16);
+
+      	spin_unlock_irqrestore(&ei->page_lock, flags);
+}
+
+static void ax_mii_expiry(unsigned long data)
+{
+	struct net_device *dev = (struct net_device *)data;
+	struct ax_device  *ax = to_ax_dev(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ax->mii_lock, flags);
+	mii_check_media(&ax->mii, netif_msg_link(ax), 0);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
+
+	if (ax->running) {
+		ax->mii_timer.expires = jiffies + HZ*2;
+		add_timer(&ax->mii_timer);
+	}
+}
+
+static int ax_open(struct net_device *dev)
+{
+	struct ax_device  *ax = to_ax_dev(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
+	int ret;
+
+	dev_dbg(ax->dev, "%s: open\n", dev->name);
+
+	ret = request_irq(dev->irq, ax_ei_interrupt, 0, dev->name, dev);
+	if (ret)
+		return ret;
+
+	ret = ax_ei_open(dev);
+	if (ret)
+		return ret;
+
+	/* turn the phy on (if turned off) */
+
+	ei_outb(ax->plat->gpoc_val, ei_local->mem + EI_SHIFT(0x17));
+	ax->running = 1;
+
+	/* start the MII timer */
+
+	init_timer(&ax->mii_timer);
+
+	ax->mii_timer.expires  = jiffies+1;
+	ax->mii_timer.data     = (unsigned long) dev;
+	ax->mii_timer.function = ax_mii_expiry;
+
+	add_timer(&ax->mii_timer);
+
+	return 0;
+}
+
+static int ax_close(struct net_device *dev)
+{
+	struct ax_device *ax = to_ax_dev(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
+
+	dev_dbg(ax->dev, "%s: close\n", dev->name);
+
+	/* turn the phy off */
+
+	ei_outb(ax->plat->gpoc_val | (1<<6),
+	       ei_local->mem + EI_SHIFT(0x17));
+
+	ax->running = 0;
+	wmb();
+
+	del_timer_sync(&ax->mii_timer);
+	ax_ei_close(dev);
+
+	free_irq(dev->irq, dev);
+	return 0;
+}
+
+static int ax_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+	struct ax_device *ax = to_ax_dev(dev);
+	unsigned long flags;
+	int rc;
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	spin_lock_irqsave(&ax->mii_lock, flags);
+	rc = generic_mii_ioctl(&ax->mii, if_mii(req), cmd, NULL);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
+
+	return rc;
+}
+
+/* ethtool ops */
+
+static void ax_get_drvinfo(struct net_device *dev,
+			   struct ethtool_drvinfo *info)
+{
+	struct ax_device *ax = to_ax_dev(dev);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, ax->dev->name);
+}
+
+static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ax_device *ax = to_ax_dev(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ax->mii_lock, flags);
+	mii_ethtool_gset(&ax->mii, cmd);
+	spin_lock_irqsave(&ax->mii_lock, flags);
+
+	return 0;
+}
+
+static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ax_device *ax = to_ax_dev(dev);
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&ax->mii_lock, flags);
+	rc = mii_ethtool_sset(&ax->mii, cmd);
+	spin_lock_irqsave(&ax->mii_lock, flags);
+
+	return rc;
+}
+
+static int ax_nway_reset(struct net_device *dev)
+{
+	struct ax_device *ax = to_ax_dev(dev);
+	return mii_nway_restart(&ax->mii);
+}
+
+static u32 ax_get_link(struct net_device *dev)
+{
+	struct ax_device *ax = to_ax_dev(dev);
+	return mii_link_ok(&ax->mii);
+}
+
+static const struct ethtool_ops ax_ethtool_ops = {
+	.get_drvinfo		= ax_get_drvinfo,
+	.get_settings		= ax_get_settings,
+	.set_settings		= ax_set_settings,
+	.nway_reset		= ax_nway_reset,
+	.get_link		= ax_get_link,
+	.get_perm_addr		= ethtool_op_get_perm_addr,
+};
+
+/* setup code */
+
+static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
+{
+	void __iomem *ioaddr = ei_local->mem;
+	struct ax_device *ax = to_ax_dev(dev);
+
+	/* Select page 0*/
+	ei_outb(E8390_NODMA+E8390_PAGE0+E8390_STOP, ioaddr + E8390_CMD);
+
+	/* set to byte access */
+	ei_outb(ax->plat->dcr_val & ~1, ioaddr + EN0_DCFG);
+	ei_outb(ax->plat->gpoc_val, ioaddr + EI_SHIFT(0x17));
+}
+
+/* ax_init_dev
+ *
+ * initialise the specified device, taking care to note the MAC
+ * address it may already have (if configured), ensure
+ * the device is ready to be used by lib8390.c and registerd with
+ * the network layer.
+ */
+
+static int ax_init_dev(struct net_device *dev, int first_init)
+{
+	struct ei_device *ei_local = netdev_priv(dev);
+	struct ax_device *ax = to_ax_dev(dev);
+	void __iomem *ioaddr = ei_local->mem;
+	unsigned int start_page;
+	unsigned int stop_page;
+	int ret;
+	int i;
+
+	ret = ax_initial_check(dev);
+	if (ret)
+		goto err_out;
+
+	/* setup goes here */
+
+	ax_initial_setup(dev, ei_local);
+
+	/* read the mac from the card prom if we need it */
+
+	if (first_init && ax->plat->flags & AXFLG_HAS_EEPROM) {
+		unsigned char SA_prom[32];
+
+		for(i = 0; i < sizeof(SA_prom); i+=2) {
+			SA_prom[i] = ei_inb(ioaddr + NE_DATAPORT);
+			SA_prom[i+1] = ei_inb(ioaddr + NE_DATAPORT);
+		}
+
+		if (ax->plat->wordlength == 2)
+			for (i = 0; i < 16; i++)
+				SA_prom[i] = SA_prom[i+i];
+
+		memcpy(dev->dev_addr,  SA_prom, 6);
+	}
+
+	if (ax->plat->wordlength == 2) {
+		/* We must set the 8390 for word mode. */
+		ei_outb(ax->plat->dcr_val, ei_local->mem + EN0_DCFG);
+		start_page = NESM_START_PG;
+		stop_page = NESM_STOP_PG;
+	} else {
+		start_page = NE1SM_START_PG;
+		stop_page = NE1SM_STOP_PG;
+	}
+
+	/* load the mac-address from the device if this is the
+	 * first time we've initialised */
+
+	if (first_init && ax->plat->flags & AXFLG_MAC_FROMDEV) {
+		ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
+			ei_local->mem + E8390_CMD); /* 0x61 */
+
+		for (i = 0 ; i < ETHER_ADDR_LEN ; i++)
+			dev->dev_addr[i] = ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
+	}
+
+	ax_reset_8390(dev);
+
+	ei_status.name = "AX88796";
+	ei_status.tx_start_page = start_page;
+	ei_status.stop_page = stop_page;
+	ei_status.word16 = (ax->plat->wordlength == 2);
+	ei_status.rx_start_page = start_page + TX_PAGES;
+
+#ifdef PACKETBUF_MEMSIZE
+	 /* Allow the packet buffer size to be overridden by know-it-alls. */
+	ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;
+#endif
+
+	ei_status.reset_8390	= &ax_reset_8390;
+	ei_status.block_input	= &ax_block_input;
+	ei_status.block_output	= &ax_block_output;
+	ei_status.get_8390_hdr	= &ax_get_8390_hdr;
+	ei_status.priv = 0;
+
+	dev->open		= ax_open;
+	dev->stop		= ax_close;
+	dev->do_ioctl		= ax_ioctl;
+	dev->ethtool_ops	= &ax_ethtool_ops;
+
+	ax->msg_enable		= NETIF_MSG_LINK;
+	ax->mii.phy_id_mask	= 0x1f;
+	ax->mii.reg_num_mask	= 0x1f;
+	ax->mii.phy_id		= 0x10;		/* onboard phy */
+	ax->mii.force_media	= 0;
+	ax->mii.full_duplex	= 0;
+	ax->mii.mdio_read	= ax_phy_read;
+	ax->mii.mdio_write	= ax_phy_write;
+	ax->mii.dev		= dev;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = ax_ei_poll;
+#endif
+	ax_NS8390_init(dev, 0);
+
+	if (first_init) {
+		printk("AX88796: %dbit, irq %d, %lx, MAC: ",
+		       ei_status.word16 ? 16:8, dev->irq, dev->base_addr);
+
+		for (i = 0; i < ETHER_ADDR_LEN; i++)
+			printk("%2.2x%c", dev->dev_addr[i],
+			       (i < (ETHER_ADDR_LEN-1) ? ':' : ' '));
+
+		printk("\n");
+	}
+
+	ret = register_netdev(dev);
+	if (ret)
+		goto out_irq;
+
+	return 0;
+
+ out_irq:
+	/* cleanup irq */
+	free_irq(dev->irq, dev);
+ err_out:
+	return ret;
+}
+
+static int ax_remove(struct platform_device *_dev)
+{
+	struct net_device *dev = platform_get_drvdata(_dev);
+	struct ax_device  *ax;
+
+	ax = to_ax_dev(dev);
+
+	unregister_netdev(dev);
+	free_irq(dev->irq, dev);
+
+	iounmap(ei_status.mem);
+	release_resource(ax->mem);
+	kfree(ax->mem);
+
+	if (ax->map2) {
+		iounmap(ax->map2);
+		release_resource(ax->mem2);
+		kfree(ax->mem2);
+	}
+
+	free_netdev(dev);
+
+	return 0;
+}
+
+/* ax_probe
+ *
+ * This is the entry point when the platform device system uses to
+ * notify us of a new device to attach to. Allocate memory, find
+ * the resources and information passed, and map the necessary registers.
+*/
+
+static int ax_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct ax_device  *ax;
+	struct resource   *res;
+	size_t size;
+	int ret;
+
+	dev = ax__alloc_ei_netdev(sizeof(struct ax_device));
+	if (dev == NULL)
+		return -ENOMEM;
+
+	/* ok, let's setup our device */
+	ax = to_ax_dev(dev);
+
+	memset(ax, 0, sizeof(struct ax_device));
+
+	spin_lock_init(&ax->mii_lock);
+
+	ax->dev = pdev;
+	ax->plat = pdev->dev.platform_data;
+	platform_set_drvdata(pdev, dev);
+
+	ei_status.rxcr_base  = ax->plat->rcr_val;
+
+	/* find the platform resources */
+
+	dev->irq  = platform_get_irq(pdev, 0);
+	if (dev->irq < 0) {
+		dev_err(&pdev->dev, "no IRQ specified\n");
+		ret = -ENXIO;
+		goto exit_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no MEM specified\n");
+		ret = -ENXIO;
+		goto exit_mem;
+	}
+
+	size = (res->end - res->start) + 1;
+
+	/* setup the register offsets from either the platform data
+	 * or by using the size of the resource provided */
+
+	if (ax->plat->reg_offsets)
+		ei_status.reg_offset = ax->plat->reg_offsets;
+	else {
+		ei_status.reg_offset = ax->reg_offsets;
+		for (ret = 0; ret < 0x18; ret++)
+			ax->reg_offsets[ret] = (size / 0x18) * ret;
+	}
+
+	ax->mem = request_mem_region(res->start, size, pdev->name);
+	if (ax->mem == NULL) {
+		dev_err(&pdev->dev, "cannot reserve registers\n");
+ 		ret = -ENXIO;
+		goto exit_mem;
+	}
+
+	ei_status.mem = ioremap(res->start, size);
+	dev->base_addr = (long)ei_status.mem;
+
+	if (ei_status.mem == NULL) {
+		dev_err(&pdev->dev, "Cannot ioremap area (%08zx,%08zx)\n",
+			res->start, res->end);
+
+ 		ret = -ENXIO;
+		goto exit_req;
+	}
+
+	/* look for reset area */
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res == NULL) {
+		if (!ax->plat->reg_offsets) {
+			for (ret = 0; ret < 0x20; ret++)
+				ax->reg_offsets[ret] = (size / 0x20) * ret;
+		}
+
+		ax->map2 = NULL;
+	} else {
+ 		size = (res->end - res->start) + 1;
+
+		ax->mem2 = request_mem_region(res->start, size, pdev->name);
+		if (ax->mem == NULL) {
+			dev_err(&pdev->dev, "cannot reserve registers\n");
+			ret = -ENXIO;
+			goto exit_mem1;
+		}
+
+		ax->map2 = ioremap(res->start, size);
+		if (ax->map2 == NULL) {
+			dev_err(&pdev->dev, "cannot map reset register");
+			ret = -ENXIO;
+			goto exit_mem2;
+		}
+
+		ei_status.reg_offset[0x1f] = ax->map2 - ei_status.mem;
+	}
+
+	/* got resources, now initialise and register device */
+
+	ret = ax_init_dev(dev, 1);
+	if (!ret)
+		return 0;
+
+	if (ax->map2 == NULL)
+		goto exit_mem1;
+
+	iounmap(ax->map2);
+
+ exit_mem2:
+	release_resource(ax->mem2);
+	kfree(ax->mem2);
+
+ exit_mem1:
+	iounmap(ei_status.mem);
+
+ exit_req:
+	release_resource(ax->mem);
+	kfree(ax->mem);
+
+ exit_mem:
+	free_netdev(dev);
+
+	return ret;
+}
+
+/* suspend and resume */
+
+#ifdef CONFIG_PM
+static int ax_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct net_device *ndev = platform_get_drvdata(dev);
+	struct ax_device  *ax = to_ax_dev(ndev);
+
+	ax->resume_open = ax->running;
+
+	netif_device_detach(ndev);
+	ax_close(ndev);
+
+	return 0;
+}
+
+static int ax_resume(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct ax_device  *ax = to_ax_dev(ndev);
+
+	ax_initial_setup(ndev, netdev_priv(ndev));
+	ax_NS8390_init(ndev, ax->resume_open);
+	netif_device_attach(ndev);
+
+	if (ax->resume_open)
+		ax_open(ndev);
+
+	return 0;
+}
+
+#else
+#define ax_suspend NULL
+#define ax_resume  NULL
+#endif
+
+static struct platform_driver axdrv = {
+	.driver	= {
+		.name		= "ax88796",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= ax_probe,
+	.remove		= ax_remove,
+	.suspend	= ax_suspend,
+	.resume		= ax_resume,
+};
+
+static int __init axdrv_init(void)
+{
+	return platform_driver_register(&axdrv);
+}
+
+static void __exit axdrv_exit(void)
+{
+	platform_driver_unregister(&axdrv);
+}
+
+module_init(axdrv_init);
+module_exit(axdrv_exit);
+
+MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 879a2fff474e..96fb0ec905a7 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -15,6 +15,7 @@
 #include <linux/ethtool.h>
 #include <linux/mii.h>
 #include <linux/if_ether.h>
+#include <linux/if_vlan.h>
 #include <linux/etherdevice.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
@@ -68,8 +69,8 @@
 	  (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
 #define NEXT_TX(N)		(((N) + 1) & (B44_TX_RING_SIZE - 1))
 
-#define RX_PKT_BUF_SZ		(1536 + bp->rx_offset + 64)
-#define TX_PKT_BUF_SZ		(B44_MAX_MTU + ETH_HLEN + 8)
+#define RX_PKT_OFFSET		30
+#define RX_PKT_BUF_SZ		(1536 + RX_PKT_OFFSET + 64)
 
 /* minimum number of free TX descriptors required to wake up TX process */
 #define B44_TX_WAKEUP_THRESH		(B44_TX_RING_SIZE / 4)
@@ -599,8 +600,7 @@ static void b44_timer(unsigned long __opaque)
 
 	spin_unlock_irq(&bp->lock);
 
-	bp->timer.expires = jiffies + HZ;
-	add_timer(&bp->timer);
+	mod_timer(&bp->timer, round_jiffies(jiffies + HZ));
 }
 
 static void b44_tx(struct b44 *bp)
@@ -653,7 +653,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 		src_map = &bp->rx_buffers[src_idx];
 	dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
 	map = &bp->rx_buffers[dest_idx];
-	skb = dev_alloc_skb(RX_PKT_BUF_SZ);
+	skb = netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ);
 	if (skb == NULL)
 		return -ENOMEM;
 
@@ -669,7 +669,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 		if (!dma_mapping_error(mapping))
 			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 		dev_kfree_skb_any(skb);
-		skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
+		skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
 		if (skb == NULL)
 			return -ENOMEM;
 		mapping = pci_map_single(bp->pdev, skb->data,
@@ -684,11 +684,9 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 		}
 	}
 
-	skb->dev = bp->dev;
-	skb_reserve(skb, bp->rx_offset);
+	rh = (struct rx_header *) skb->data;
+	skb_reserve(skb, RX_PKT_OFFSET);
 
-	rh = (struct rx_header *)
-		(skb->data - bp->rx_offset);
 	rh->len = 0;
 	rh->flags = 0;
 
@@ -698,13 +696,13 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 	if (src_map != NULL)
 		src_map->skb = NULL;
 
-	ctrl  = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset));
+	ctrl  = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - RX_PKT_OFFSET));
 	if (dest_idx == (B44_RX_RING_SIZE - 1))
 		ctrl |= DESC_CTRL_EOT;
 
 	dp = &bp->rx_ring[dest_idx];
 	dp->ctrl = cpu_to_le32(ctrl);
-	dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
+	dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset);
 
 	if (bp->flags & B44_FLAG_RX_RING_HACK)
 		b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma,
@@ -783,7 +781,7 @@ static int b44_rx(struct b44 *bp, int budget)
 					    PCI_DMA_FROMDEVICE);
 		rh = (struct rx_header *) skb->data;
 		len = le16_to_cpu(rh->len);
-		if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
+		if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) ||
 		    (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
 		drop_it:
 			b44_recycle_rx(bp, cons, bp->rx_prod);
@@ -815,8 +813,8 @@ static int b44_rx(struct b44 *bp, int budget)
 			pci_unmap_single(bp->pdev, map,
 					 skb_size, PCI_DMA_FROMDEVICE);
 			/* Leave out rx_header */
-                	skb_put(skb, len+bp->rx_offset);
-            	        skb_pull(skb,bp->rx_offset);
+                	skb_put(skb, len + RX_PKT_OFFSET);
+            	        skb_pull(skb, RX_PKT_OFFSET);
 		} else {
 			struct sk_buff *copy_skb;
 
@@ -828,7 +826,7 @@ static int b44_rx(struct b44 *bp, int budget)
 			skb_reserve(copy_skb, 2);
 			skb_put(copy_skb, len);
 			/* DMA sync done above, copy just the actual packet */
-			skb_copy_from_linear_data_offset(skb, bp->rx_offset,
+			skb_copy_from_linear_data_offset(skb, RX_PKT_OFFSET,
 							 copy_skb->data, len);
 			skb = copy_skb;
 		}
@@ -969,7 +967,6 @@ static void b44_tx_timeout(struct net_device *dev)
 static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct b44 *bp = netdev_priv(dev);
-	struct sk_buff *bounce_skb;
 	int rc = NETDEV_TX_OK;
 	dma_addr_t mapping;
 	u32 len, entry, ctrl;
@@ -987,12 +984,13 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
 	if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
+		struct sk_buff *bounce_skb;
+
 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
 		if (!dma_mapping_error(mapping))
 			pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
 
-		bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
-					     GFP_ATOMIC|GFP_DMA);
+		bounce_skb = __dev_alloc_skb(len, GFP_ATOMIC | GFP_DMA);
 		if (!bounce_skb)
 			goto err_out;
 
@@ -1001,13 +999,12 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
 			if (!dma_mapping_error(mapping))
 				pci_unmap_single(bp->pdev, mapping,
-					 len, PCI_DMA_TODEVICE);
+						 len, PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(bounce_skb);
 			goto err_out;
 		}
 
-		skb_copy_from_linear_data(skb, skb_put(bounce_skb, len),
-					  skb->len);
+		skb_copy_from_linear_data(skb, skb_put(bounce_skb, len), len);
 		dev_kfree_skb_any(skb);
 		skb = bounce_skb;
 	}
@@ -1396,12 +1393,12 @@ static void b44_init_hw(struct b44 *bp, int reset_kind)
 	bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
 	if (reset_kind == B44_PARTIAL_RESET) {
 		bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-				      (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
+				      (RX_PKT_OFFSET << DMARX_CTRL_ROSHIFT)));
 	} else {
 		bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
 		bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
 		bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-				      (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
+				      (RX_PKT_OFFSET << DMARX_CTRL_ROSHIFT)));
 		bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
 
 		bw32(bp, B44_DMARX_PTR, bp->rx_pending);
@@ -2093,11 +2090,6 @@ static int __devinit b44_get_invariants(struct b44 *bp)
 
 	bp->phy_addr = eeprom[90] & 0x1f;
 
-	/* With this, plus the rx_header prepended to the data by the
-	 * hardware, we'll land the ethernet header on a 2-byte boundary.
-	 */
-	bp->rx_offset = 30;
-
 	bp->imask = IMASK_DEF;
 
 	bp->core_unit = ssb_core_unit(bp);
@@ -2348,11 +2340,11 @@ static int b44_resume(struct pci_dev *pdev)
 	netif_device_attach(bp->dev);
 	spin_unlock_irq(&bp->lock);
 
-	bp->timer.expires = jiffies + HZ;
-	add_timer(&bp->timer);
-
 	b44_enable_ints(bp);
 	netif_wake_queue(dev);
+
+	mod_timer(&bp->timer, jiffies + 1);
+
 	return 0;
 }
 
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index 18fc13336628..e537e63f292e 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -443,8 +443,6 @@ struct b44 {
 #define B44_FLAG_TX_RING_HACK	0x40000000
 #define B44_FLAG_WOL_ENABLE	0x80000000
 
-	u32			rx_offset;
-
 	u32			msg_enable;
 
 	struct timer_list	timer;
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index ce3ed67a878e..02e994b1b028 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -40,7 +40,6 @@
 #define BCM_VLAN 1
 #endif
 #include <net/ip.h>
-#include <net/tcp.h>
 #include <net/checksum.h>
 #include <linux/workqueue.h>
 #include <linux/crc32.h>
@@ -54,8 +53,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.5.11"
-#define DRV_MODULE_RELDATE	"June 4, 2007"
+#define DRV_MODULE_VERSION	"1.6.2"
+#define DRV_MODULE_RELDATE	"July 6, 2007"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -550,6 +549,9 @@ bnx2_report_fw_link(struct bnx2 *bp)
 {
 	u32 fw_link_status = 0;
 
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+		return;
+
 	if (bp->link_up) {
 		u32 bmsr;
 
@@ -601,12 +603,21 @@ bnx2_report_fw_link(struct bnx2 *bp)
 	REG_WR_IND(bp, bp->shmem_base + BNX2_LINK_STATUS, fw_link_status);
 }
 
+static char *
+bnx2_xceiver_str(struct bnx2 *bp)
+{
+	return ((bp->phy_port == PORT_FIBRE) ? "SerDes" :
+		((bp->phy_flags & PHY_SERDES_FLAG) ? "Remote Copper" :
+		 "Copper"));
+}
+
 static void
 bnx2_report_link(struct bnx2 *bp)
 {
 	if (bp->link_up) {
 		netif_carrier_on(bp->dev);
-		printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
+		printk(KERN_INFO PFX "%s NIC %s Link is Up, ", bp->dev->name,
+		       bnx2_xceiver_str(bp));
 
 		printk("%d Mbps ", bp->line_speed);
 
@@ -630,7 +641,8 @@ bnx2_report_link(struct bnx2 *bp)
 	}
 	else {
 		netif_carrier_off(bp->dev);
-		printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+		printk(KERN_ERR PFX "%s NIC %s Link is Down\n", bp->dev->name,
+		       bnx2_xceiver_str(bp));
 	}
 
 	bnx2_report_fw_link(bp);
@@ -1100,6 +1112,9 @@ bnx2_set_link(struct bnx2 *bp)
 		return 0;
 	}
 
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+		return 0;
+
 	link_up = bp->link_up;
 
 	bnx2_enable_bmsr1(bp);
@@ -1210,12 +1225,74 @@ bnx2_phy_get_pause_adv(struct bnx2 *bp)
 	return adv;
 }
 
+static int bnx2_fw_sync(struct bnx2 *, u32, int);
+
 static int
-bnx2_setup_serdes_phy(struct bnx2 *bp)
+bnx2_setup_remote_phy(struct bnx2 *bp, u8 port)
+{
+	u32 speed_arg = 0, pause_adv;
+
+	pause_adv = bnx2_phy_get_pause_adv(bp);
+
+	if (bp->autoneg & AUTONEG_SPEED) {
+		speed_arg |= BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG;
+		if (bp->advertising & ADVERTISED_10baseT_Half)
+			speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_10HALF;
+		if (bp->advertising & ADVERTISED_10baseT_Full)
+			speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_10FULL;
+		if (bp->advertising & ADVERTISED_100baseT_Half)
+			speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_100HALF;
+		if (bp->advertising & ADVERTISED_100baseT_Full)
+			speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_100FULL;
+		if (bp->advertising & ADVERTISED_1000baseT_Full)
+			speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_1GFULL;
+		if (bp->advertising & ADVERTISED_2500baseX_Full)
+			speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_2G5FULL;
+	} else {
+		if (bp->req_line_speed == SPEED_2500)
+			speed_arg = BNX2_NETLINK_SET_LINK_SPEED_2G5FULL;
+		else if (bp->req_line_speed == SPEED_1000)
+			speed_arg = BNX2_NETLINK_SET_LINK_SPEED_1GFULL;
+		else if (bp->req_line_speed == SPEED_100) {
+			if (bp->req_duplex == DUPLEX_FULL)
+				speed_arg = BNX2_NETLINK_SET_LINK_SPEED_100FULL;
+			else
+				speed_arg = BNX2_NETLINK_SET_LINK_SPEED_100HALF;
+		} else if (bp->req_line_speed == SPEED_10) {
+			if (bp->req_duplex == DUPLEX_FULL)
+				speed_arg = BNX2_NETLINK_SET_LINK_SPEED_10FULL;
+			else
+				speed_arg = BNX2_NETLINK_SET_LINK_SPEED_10HALF;
+		}
+	}
+
+	if (pause_adv & (ADVERTISE_1000XPAUSE | ADVERTISE_PAUSE_CAP))
+		speed_arg |= BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE;
+	if (pause_adv & (ADVERTISE_1000XPSE_ASYM | ADVERTISE_1000XPSE_ASYM))
+		speed_arg |= BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE;
+
+	if (port == PORT_TP)
+		speed_arg |= BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE |
+			     BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED;
+
+	REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB_ARG0, speed_arg);
+
+	spin_unlock_bh(&bp->phy_lock);
+	bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_CMD_SET_LINK, 0);
+	spin_lock_bh(&bp->phy_lock);
+
+	return 0;
+}
+
+static int
+bnx2_setup_serdes_phy(struct bnx2 *bp, u8 port)
 {
 	u32 adv, bmcr;
 	u32 new_adv = 0;
 
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+		return (bnx2_setup_remote_phy(bp, port));
+
 	if (!(bp->autoneg & AUTONEG_SPEED)) {
 		u32 new_bmcr;
 		int force_link_down = 0;
@@ -1323,7 +1400,9 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
 }
 
 #define ETHTOOL_ALL_FIBRE_SPEED						\
-	(ADVERTISED_1000baseT_Full)
+	(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ?			\
+		(ADVERTISED_2500baseX_Full | ADVERTISED_1000baseT_Full) :\
+		(ADVERTISED_1000baseT_Full)
 
 #define ETHTOOL_ALL_COPPER_SPEED					\
 	(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |		\
@@ -1335,6 +1414,188 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
 
 #define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL)
 
+static void
+bnx2_set_default_remote_link(struct bnx2 *bp)
+{
+	u32 link;
+
+	if (bp->phy_port == PORT_TP)
+		link = REG_RD_IND(bp, bp->shmem_base + BNX2_RPHY_COPPER_LINK);
+	else
+		link = REG_RD_IND(bp, bp->shmem_base + BNX2_RPHY_SERDES_LINK);
+
+	if (link & BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG) {
+		bp->req_line_speed = 0;
+		bp->autoneg |= AUTONEG_SPEED;
+		bp->advertising = ADVERTISED_Autoneg;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_10HALF)
+			bp->advertising |= ADVERTISED_10baseT_Half;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_10FULL)
+			bp->advertising |= ADVERTISED_10baseT_Full;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_100HALF)
+			bp->advertising |= ADVERTISED_100baseT_Half;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_100FULL)
+			bp->advertising |= ADVERTISED_100baseT_Full;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_1GFULL)
+			bp->advertising |= ADVERTISED_1000baseT_Full;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_2G5FULL)
+			bp->advertising |= ADVERTISED_2500baseX_Full;
+	} else {
+		bp->autoneg = 0;
+		bp->advertising = 0;
+		bp->req_duplex = DUPLEX_FULL;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_10) {
+			bp->req_line_speed = SPEED_10;
+			if (link & BNX2_NETLINK_SET_LINK_SPEED_10HALF)
+				bp->req_duplex = DUPLEX_HALF;
+		}
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_100) {
+			bp->req_line_speed = SPEED_100;
+			if (link & BNX2_NETLINK_SET_LINK_SPEED_100HALF)
+				bp->req_duplex = DUPLEX_HALF;
+		}
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_1GFULL)
+			bp->req_line_speed = SPEED_1000;
+		if (link & BNX2_NETLINK_SET_LINK_SPEED_2G5FULL)
+			bp->req_line_speed = SPEED_2500;
+	}
+}
+
+static void
+bnx2_set_default_link(struct bnx2 *bp)
+{
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+		return bnx2_set_default_remote_link(bp);
+
+	bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
+	bp->req_line_speed = 0;
+	if (bp->phy_flags & PHY_SERDES_FLAG) {
+		u32 reg;
+
+		bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
+
+		reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
+		reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
+		if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
+			bp->autoneg = 0;
+			bp->req_line_speed = bp->line_speed = SPEED_1000;
+			bp->req_duplex = DUPLEX_FULL;
+		}
+	} else
+		bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
+}
+
+static void
+bnx2_send_heart_beat(struct bnx2 *bp)
+{
+	u32 msg;
+	u32 addr;
+
+	spin_lock(&bp->indirect_lock);
+	msg = (u32) (++bp->fw_drv_pulse_wr_seq & BNX2_DRV_PULSE_SEQ_MASK);
+	addr = bp->shmem_base + BNX2_DRV_PULSE_MB;
+	REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, addr);
+	REG_WR(bp, BNX2_PCICFG_REG_WINDOW, msg);
+	spin_unlock(&bp->indirect_lock);
+}
+
+static void
+bnx2_remote_phy_event(struct bnx2 *bp)
+{
+	u32 msg;
+	u8 link_up = bp->link_up;
+	u8 old_port;
+
+	msg = REG_RD_IND(bp, bp->shmem_base + BNX2_LINK_STATUS);
+
+	if (msg & BNX2_LINK_STATUS_HEART_BEAT_EXPIRED)
+		bnx2_send_heart_beat(bp);
+
+	msg &= ~BNX2_LINK_STATUS_HEART_BEAT_EXPIRED;
+
+	if ((msg & BNX2_LINK_STATUS_LINK_UP) == BNX2_LINK_STATUS_LINK_DOWN)
+		bp->link_up = 0;
+	else {
+		u32 speed;
+
+		bp->link_up = 1;
+		speed = msg & BNX2_LINK_STATUS_SPEED_MASK;
+		bp->duplex = DUPLEX_FULL;
+		switch (speed) {
+			case BNX2_LINK_STATUS_10HALF:
+				bp->duplex = DUPLEX_HALF;
+			case BNX2_LINK_STATUS_10FULL:
+				bp->line_speed = SPEED_10;
+				break;
+			case BNX2_LINK_STATUS_100HALF:
+				bp->duplex = DUPLEX_HALF;
+			case BNX2_LINK_STATUS_100BASE_T4:
+			case BNX2_LINK_STATUS_100FULL:
+				bp->line_speed = SPEED_100;
+				break;
+			case BNX2_LINK_STATUS_1000HALF:
+				bp->duplex = DUPLEX_HALF;
+			case BNX2_LINK_STATUS_1000FULL:
+				bp->line_speed = SPEED_1000;
+				break;
+			case BNX2_LINK_STATUS_2500HALF:
+				bp->duplex = DUPLEX_HALF;
+			case BNX2_LINK_STATUS_2500FULL:
+				bp->line_speed = SPEED_2500;
+				break;
+			default:
+				bp->line_speed = 0;
+				break;
+		}
+
+		spin_lock(&bp->phy_lock);
+		bp->flow_ctrl = 0;
+		if ((bp->autoneg & (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) !=
+		    (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) {
+			if (bp->duplex == DUPLEX_FULL)
+				bp->flow_ctrl = bp->req_flow_ctrl;
+		} else {
+			if (msg & BNX2_LINK_STATUS_TX_FC_ENABLED)
+				bp->flow_ctrl |= FLOW_CTRL_TX;
+			if (msg & BNX2_LINK_STATUS_RX_FC_ENABLED)
+				bp->flow_ctrl |= FLOW_CTRL_RX;
+		}
+
+		old_port = bp->phy_port;
+		if (msg & BNX2_LINK_STATUS_SERDES_LINK)
+			bp->phy_port = PORT_FIBRE;
+		else
+			bp->phy_port = PORT_TP;
+
+		if (old_port != bp->phy_port)
+			bnx2_set_default_link(bp);
+
+		spin_unlock(&bp->phy_lock);
+	}
+	if (bp->link_up != link_up)
+		bnx2_report_link(bp);
+
+	bnx2_set_mac_link(bp);
+}
+
+static int
+bnx2_set_remote_link(struct bnx2 *bp)
+{
+	u32 evt_code;
+
+	evt_code = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_EVT_CODE_MB);
+	switch (evt_code) {
+		case BNX2_FW_EVT_CODE_LINK_EVENT:
+			bnx2_remote_phy_event(bp);
+			break;
+		case BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT:
+		default:
+			bnx2_send_heart_beat(bp);
+			break;
+	}
+	return 0;
+}
+
 static int
 bnx2_setup_copper_phy(struct bnx2 *bp)
 {
@@ -1433,13 +1694,13 @@ bnx2_setup_copper_phy(struct bnx2 *bp)
 }
 
 static int
-bnx2_setup_phy(struct bnx2 *bp)
+bnx2_setup_phy(struct bnx2 *bp, u8 port)
 {
 	if (bp->loopback == MAC_LOOPBACK)
 		return 0;
 
 	if (bp->phy_flags & PHY_SERDES_FLAG) {
-		return (bnx2_setup_serdes_phy(bp));
+		return (bnx2_setup_serdes_phy(bp, port));
 	}
 	else {
 		return (bnx2_setup_copper_phy(bp));
@@ -1659,6 +1920,9 @@ bnx2_init_phy(struct bnx2 *bp)
 
         REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK);
 
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+		goto setup_phy;
+
 	bnx2_read_phy(bp, MII_PHYSID1, &val);
 	bp->phy_id = val << 16;
 	bnx2_read_phy(bp, MII_PHYSID2, &val);
@@ -1676,7 +1940,9 @@ bnx2_init_phy(struct bnx2 *bp)
 		rc = bnx2_init_copper_phy(bp);
 	}
 
-	bnx2_setup_phy(bp);
+setup_phy:
+	if (!rc)
+		rc = bnx2_setup_phy(bp, bp->phy_port);
 
 	return rc;
 }
@@ -1984,6 +2250,9 @@ bnx2_phy_int(struct bnx2 *bp)
 		bnx2_set_link(bp);
 		spin_unlock(&bp->phy_lock);
 	}
+	if (bnx2_phy_event_is_set(bp, STATUS_ATTN_BITS_TIMER_ABORT))
+		bnx2_set_remote_link(bp);
+
 }
 
 static void
@@ -2297,6 +2566,7 @@ bnx2_interrupt(int irq, void *dev_instance)
 {
 	struct net_device *dev = dev_instance;
 	struct bnx2 *bp = netdev_priv(dev);
+	struct status_block *sblk = bp->status_blk;
 
 	/* When using INTx, it is possible for the interrupt to arrive
 	 * at the CPU before the status block posted prior to the
@@ -2304,7 +2574,7 @@ bnx2_interrupt(int irq, void *dev_instance)
 	 * When using MSI, the MSI message will always complete after
 	 * the status block write.
 	 */
-	if ((bp->status_blk->status_idx == bp->last_status_idx) &&
+	if ((sblk->status_idx == bp->last_status_idx) &&
 	    (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) &
 	     BNX2_PCICFG_MISC_STATUS_INTA_VALUE))
 		return IRQ_NONE;
@@ -2313,16 +2583,25 @@ bnx2_interrupt(int irq, void *dev_instance)
 		BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
 		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
 
+	/* Read back to deassert IRQ immediately to avoid too many
+	 * spurious interrupts.
+	 */
+	REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD);
+
 	/* Return here if interrupt is shared and is disabled. */
 	if (unlikely(atomic_read(&bp->intr_sem) != 0))
 		return IRQ_HANDLED;
 
-	netif_rx_schedule(dev);
+	if (netif_rx_schedule_prep(dev)) {
+		bp->last_status_idx = sblk->status_idx;
+		__netif_rx_schedule(dev);
+	}
 
 	return IRQ_HANDLED;
 }
 
-#define STATUS_ATTN_EVENTS	STATUS_ATTN_BITS_LINK_STATE
+#define STATUS_ATTN_EVENTS	(STATUS_ATTN_BITS_LINK_STATE | \
+				 STATUS_ATTN_BITS_TIMER_ABORT)
 
 static inline int
 bnx2_has_work(struct bnx2 *bp)
@@ -3562,6 +3841,36 @@ nvram_write_end:
 	return rc;
 }
 
+static void
+bnx2_init_remote_phy(struct bnx2 *bp)
+{
+	u32 val;
+
+	bp->phy_flags &= ~REMOTE_PHY_CAP_FLAG;
+	if (!(bp->phy_flags & PHY_SERDES_FLAG))
+		return;
+
+	val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_CAP_MB);
+	if ((val & BNX2_FW_CAP_SIGNATURE_MASK) != BNX2_FW_CAP_SIGNATURE)
+		return;
+
+	if (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE) {
+		if (netif_running(bp->dev)) {
+			val = BNX2_DRV_ACK_CAP_SIGNATURE |
+			      BNX2_FW_CAP_REMOTE_PHY_CAPABLE;
+			REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_ACK_CAP_MB,
+				   val);
+		}
+		bp->phy_flags |= REMOTE_PHY_CAP_FLAG;
+
+		val = REG_RD_IND(bp, bp->shmem_base + BNX2_LINK_STATUS);
+		if (val & BNX2_LINK_STATUS_SERDES_LINK)
+			bp->phy_port = PORT_FIBRE;
+		else
+			bp->phy_port = PORT_TP;
+	}
+}
+
 static int
 bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 {
@@ -3642,6 +3951,12 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 	if (rc)
 		return rc;
 
+	spin_lock_bh(&bp->phy_lock);
+	bnx2_init_remote_phy(bp);
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+		bnx2_set_default_remote_link(bp);
+	spin_unlock_bh(&bp->phy_lock);
+
 	if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
 		/* Adjust the voltage regular to two steps lower.  The default
 		 * of this register is 0x0000000e. */
@@ -3826,7 +4141,7 @@ bnx2_init_chip(struct bnx2 *bp)
 	rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET,
 			  0);
 
-	REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff);
+	REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, BNX2_MISC_ENABLE_DEFAULT);
 	REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
 
 	udelay(20);
@@ -4069,8 +4384,8 @@ bnx2_init_nic(struct bnx2 *bp)
 
 	spin_lock_bh(&bp->phy_lock);
 	bnx2_init_phy(bp);
-	spin_unlock_bh(&bp->phy_lock);
 	bnx2_set_link(bp);
+	spin_unlock_bh(&bp->phy_lock);
 	return 0;
 }
 
@@ -4600,6 +4915,9 @@ bnx2_5706_serdes_timer(struct bnx2 *bp)
 static void
 bnx2_5708_serdes_timer(struct bnx2 *bp)
 {
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+		return;
+
 	if ((bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) == 0) {
 		bp->serdes_an_pending = 0;
 		return;
@@ -4631,7 +4949,6 @@ static void
 bnx2_timer(unsigned long data)
 {
 	struct bnx2 *bp = (struct bnx2 *) data;
-	u32 msg;
 
 	if (!netif_running(bp->dev))
 		return;
@@ -4639,8 +4956,7 @@ bnx2_timer(unsigned long data)
 	if (atomic_read(&bp->intr_sem) != 0)
 		goto bnx2_restart_timer;
 
-	msg = (u32) ++bp->fw_drv_pulse_wr_seq;
-	REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg);
+	bnx2_send_heart_beat(bp);
 
 	bp->stats_blk->stat_FwRxDrop = REG_RD_IND(bp, BNX2_FW_RX_DROP_COUNT);
 
@@ -5083,17 +5399,25 @@ static int
 bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct bnx2 *bp = netdev_priv(dev);
+	int support_serdes = 0, support_copper = 0;
 
 	cmd->supported = SUPPORTED_Autoneg;
-	if (bp->phy_flags & PHY_SERDES_FLAG) {
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
+		support_serdes = 1;
+		support_copper = 1;
+	} else if (bp->phy_port == PORT_FIBRE)
+		support_serdes = 1;
+	else
+		support_copper = 1;
+
+	if (support_serdes) {
 		cmd->supported |= SUPPORTED_1000baseT_Full |
 			SUPPORTED_FIBRE;
 		if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG)
 			cmd->supported |= SUPPORTED_2500baseX_Full;
 
-		cmd->port = PORT_FIBRE;
 	}
-	else {
+	if (support_copper) {
 		cmd->supported |= SUPPORTED_10baseT_Half |
 			SUPPORTED_10baseT_Full |
 			SUPPORTED_100baseT_Half |
@@ -5101,9 +5425,10 @@ bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			SUPPORTED_1000baseT_Full |
 			SUPPORTED_TP;
 
-		cmd->port = PORT_TP;
 	}
 
+	spin_lock_bh(&bp->phy_lock);
+	cmd->port = bp->phy_port;
 	cmd->advertising = bp->advertising;
 
 	if (bp->autoneg & AUTONEG_SPEED) {
@@ -5121,6 +5446,7 @@ bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->speed = -1;
 		cmd->duplex = -1;
 	}
+	spin_unlock_bh(&bp->phy_lock);
 
 	cmd->transceiver = XCVR_INTERNAL;
 	cmd->phy_address = bp->phy_addr;
@@ -5136,6 +5462,15 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	u8 req_duplex = bp->req_duplex;
 	u16 req_line_speed = bp->req_line_speed;
 	u32 advertising = bp->advertising;
+	int err = -EINVAL;
+
+	spin_lock_bh(&bp->phy_lock);
+
+	if (cmd->port != PORT_TP && cmd->port != PORT_FIBRE)
+		goto err_out_unlock;
+
+	if (cmd->port != bp->phy_port && !(bp->phy_flags & REMOTE_PHY_CAP_FLAG))
+		goto err_out_unlock;
 
 	if (cmd->autoneg == AUTONEG_ENABLE) {
 		autoneg |= AUTONEG_SPEED;
@@ -5148,44 +5483,41 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 			(cmd->advertising == ADVERTISED_100baseT_Half) ||
 			(cmd->advertising == ADVERTISED_100baseT_Full)) {
 
-			if (bp->phy_flags & PHY_SERDES_FLAG)
-				return -EINVAL;
+			if (cmd->port == PORT_FIBRE)
+				goto err_out_unlock;
 
 			advertising = cmd->advertising;
 
 		} else if (cmd->advertising == ADVERTISED_2500baseX_Full) {
-			if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
-				return -EINVAL;
-		} else if (cmd->advertising == ADVERTISED_1000baseT_Full) {
+			if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ||
+			    (cmd->port == PORT_TP))
+				goto err_out_unlock;
+		} else if (cmd->advertising == ADVERTISED_1000baseT_Full)
 			advertising = cmd->advertising;
-		}
-		else if (cmd->advertising == ADVERTISED_1000baseT_Half) {
-			return -EINVAL;
-		}
+		else if (cmd->advertising == ADVERTISED_1000baseT_Half)
+			goto err_out_unlock;
 		else {
-			if (bp->phy_flags & PHY_SERDES_FLAG) {
+			if (cmd->port == PORT_FIBRE)
 				advertising = ETHTOOL_ALL_FIBRE_SPEED;
-			}
-			else {
+			else
 				advertising = ETHTOOL_ALL_COPPER_SPEED;
-			}
 		}
 		advertising |= ADVERTISED_Autoneg;
 	}
 	else {
-		if (bp->phy_flags & PHY_SERDES_FLAG) {
+		if (cmd->port == PORT_FIBRE) {
 			if ((cmd->speed != SPEED_1000 &&
 			     cmd->speed != SPEED_2500) ||
 			    (cmd->duplex != DUPLEX_FULL))
-				return -EINVAL;
+				goto err_out_unlock;
 
 			if (cmd->speed == SPEED_2500 &&
 			    !(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
-				return -EINVAL;
-		}
-		else if (cmd->speed == SPEED_1000) {
-			return -EINVAL;
+				goto err_out_unlock;
 		}
+		else if (cmd->speed == SPEED_1000 || cmd->speed == SPEED_2500)
+			goto err_out_unlock;
+
 		autoneg &= ~AUTONEG_SPEED;
 		req_line_speed = cmd->speed;
 		req_duplex = cmd->duplex;
@@ -5197,13 +5529,12 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	bp->req_line_speed = req_line_speed;
 	bp->req_duplex = req_duplex;
 
-	spin_lock_bh(&bp->phy_lock);
-
-	bnx2_setup_phy(bp);
+	err = bnx2_setup_phy(bp, cmd->port);
 
+err_out_unlock:
 	spin_unlock_bh(&bp->phy_lock);
 
-	return 0;
+	return err;
 }
 
 static void
@@ -5214,11 +5545,7 @@ bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 	strcpy(info->driver, DRV_MODULE_NAME);
 	strcpy(info->version, DRV_MODULE_VERSION);
 	strcpy(info->bus_info, pci_name(bp->pdev));
-	info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0';
-	info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0';
-	info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0';
-	info->fw_version[1] = info->fw_version[3] = '.';
-	info->fw_version[5] = 0;
+	strcpy(info->fw_version, bp->fw_version);
 }
 
 #define BNX2_REGDUMP_LEN		(32 * 1024)
@@ -5330,6 +5657,14 @@ bnx2_nway_reset(struct net_device *dev)
 
 	spin_lock_bh(&bp->phy_lock);
 
+	if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
+		int rc;
+
+		rc = bnx2_setup_remote_phy(bp, bp->phy_port);
+		spin_unlock_bh(&bp->phy_lock);
+		return rc;
+	}
+
 	/* Force a link down visible on the other side */
 	if (bp->phy_flags & PHY_SERDES_FLAG) {
 		bnx2_write_phy(bp, bp->mii_bmcr, BMCR_LOOPBACK);
@@ -5543,7 +5878,7 @@ bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
 
 	spin_lock_bh(&bp->phy_lock);
 
-	bnx2_setup_phy(bp);
+	bnx2_setup_phy(bp, bp->phy_port);
 
 	spin_unlock_bh(&bp->phy_lock);
 
@@ -5939,6 +6274,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	case SIOCGMIIREG: {
 		u32 mii_regval;
 
+		if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+			return -EOPNOTSUPP;
+
 		if (!netif_running(dev))
 			return -EAGAIN;
 
@@ -5955,6 +6293,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
+		if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+			return -EOPNOTSUPP;
+
 		if (!netif_running(dev))
 			return -EAGAIN;
 
@@ -6116,7 +6457,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 {
 	struct bnx2 *bp;
 	unsigned long mem_len;
-	int rc;
+	int rc, i, j;
 	u32 reg;
 	u64 dma_mask, persist_dma_mask;
 
@@ -6273,7 +6614,35 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		goto err_out_unmap;
 	}
 
-	bp->fw_ver = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
+	reg = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
+	for (i = 0, j = 0; i < 3; i++) {
+		u8 num, k, skip0;
+
+		num = (u8) (reg >> (24 - (i * 8)));
+		for (k = 100, skip0 = 1; k >= 1; num %= k, k /= 10) {
+			if (num >= k || !skip0 || k == 1) {
+				bp->fw_version[j++] = (num / k) + '0';
+				skip0 = 0;
+			}
+		}
+		if (i != 2)
+			bp->fw_version[j++] = '.';
+	}
+	reg = REG_RD_IND(bp, bp->shmem_base + BNX2_BC_STATE_CONDITION);
+	reg &= BNX2_CONDITION_MFW_RUN_MASK;
+	if (reg != BNX2_CONDITION_MFW_RUN_UNKNOWN &&
+	    reg != BNX2_CONDITION_MFW_RUN_NONE) {
+		int i;
+		u32 addr = REG_RD_IND(bp, bp->shmem_base + BNX2_MFW_VER_PTR);
+
+		bp->fw_version[j++] = ' ';
+		for (i = 0; i < 3; i++) {
+			reg = REG_RD_IND(bp, addr + i * 4);
+			reg = swab32(reg);
+			memcpy(&bp->fw_version[j], &reg, 4);
+			j += 4;
+		}
+	}
 
 	reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_UPPER);
 	bp->mac_addr[0] = (u8) (reg >> 8);
@@ -6315,7 +6684,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	else if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT)
 		bp->phy_flags |= PHY_SERDES_FLAG;
 
+	bp->phy_port = PORT_TP;
 	if (bp->phy_flags & PHY_SERDES_FLAG) {
+		bp->phy_port = PORT_FIBRE;
 		bp->flags |= NO_WOL_FLAG;
 		if (CHIP_NUM(bp) != CHIP_NUM_5706) {
 			bp->phy_addr = 2;
@@ -6324,6 +6695,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 			if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
 				bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG;
 		}
+		bnx2_init_remote_phy(bp);
+
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
 		   CHIP_NUM(bp) == CHIP_NUM_5708)
 		bp->phy_flags |= PHY_CRC_FIX_FLAG;
@@ -6363,10 +6736,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		while ((amd_8132 = pci_get_device(PCI_VENDOR_ID_AMD,
 						  PCI_DEVICE_ID_AMD_8132_BRIDGE,
 						  amd_8132))) {
-			u8 rev;
 
-			pci_read_config_byte(amd_8132, PCI_REVISION_ID, &rev);
-			if (rev >= 0x10 && rev <= 0x13) {
+			if (amd_8132->revision >= 0x10 &&
+			    amd_8132->revision <= 0x13) {
 				disable_msi = 1;
 				pci_dev_put(amd_8132);
 				break;
@@ -6374,23 +6746,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		}
 	}
 
-	bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
-	bp->req_line_speed = 0;
-	if (bp->phy_flags & PHY_SERDES_FLAG) {
-		bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
-
-		reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
-		reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
-		if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
-			bp->autoneg = 0;
-			bp->req_line_speed = bp->line_speed = SPEED_1000;
-			bp->req_duplex = DUPLEX_FULL;
-		}
-	}
-	else {
-		bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
-	}
-
+	bnx2_set_default_link(bp);
 	bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
 
 	init_timer(&bp->timer);
@@ -6490,10 +6846,10 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memcpy(dev->perm_addr, bp->mac_addr, 6);
 	bp->name = board_info[ent->driver_data].name;
 
+	dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 	if (CHIP_NUM(bp) == CHIP_NUM_5709)
-		dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
-	else
-		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+		dev->features |= NETIF_F_IPV6_CSUM;
+
 #ifdef BCM_VLAN
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 #endif
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 49a5de253b17..d8cd1afeb23d 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6338,6 +6338,8 @@ struct l2_fhdr {
 
 #define RX_COPY_THRESH			92
 
+#define BNX2_MISC_ENABLE_DEFAULT	0x7ffffff
+
 #define DMA_READ_CHANS	5
 #define DMA_WRITE_CHANS	3
 
@@ -6537,6 +6539,7 @@ struct bnx2 {
 #define PHY_INT_MODE_AUTO_POLLING_FLAG	0x100
 #define PHY_INT_MODE_LINK_READY_FLAG	0x200
 #define PHY_DIS_EARLY_DAC_FLAG		0x400
+#define REMOTE_PHY_CAP_FLAG		0x800
 
 	u32			mii_bmcr;
 	u32			mii_bmsr;
@@ -6625,6 +6628,7 @@ struct bnx2 {
 	u16			req_line_speed;
 	u8			req_duplex;
 
+	u8			phy_port;
 	u8			link_up;
 
 	u16			line_speed;
@@ -6656,7 +6660,7 @@ struct bnx2 {
 
 	u32			shmem_base;
 
-	u32			fw_ver;
+	char			fw_version[32];
 
 	int			pm_cap;
 	int			pcix_cap;
@@ -6770,7 +6774,7 @@ struct fw_info {
  * the firmware has timed out, the driver will assume there is no firmware
  * running and there won't be any firmware-driver synchronization during a
  * driver reset. */
-#define FW_ACK_TIME_OUT_MS                  100
+#define FW_ACK_TIME_OUT_MS                  1000
 
 
 #define BNX2_DRV_RESET_SIGNATURE		0x00000000
@@ -6788,6 +6792,7 @@ struct fw_info {
 #define BNX2_DRV_MSG_CODE_DIAG			 0x07000000
 #define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL	 0x09000000
 #define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN		 0x0b000000
+#define BNX2_DRV_MSG_CODE_CMD_SET_LINK		 0x10000000
 
 #define BNX2_DRV_MSG_DATA			 0x00ff0000
 #define BNX2_DRV_MSG_DATA_WAIT0			 0x00010000
@@ -6836,6 +6841,7 @@ struct fw_info {
 #define BNX2_LINK_STATUS_SERDES_LINK		 (1<<20)
 #define BNX2_LINK_STATUS_PARTNER_AD_2500FULL	 (1<<21)
 #define BNX2_LINK_STATUS_PARTNER_AD_2500HALF	 (1<<22)
+#define BNX2_LINK_STATUS_HEART_BEAT_EXPIRED	 (1<<31)
 
 #define BNX2_DRV_PULSE_MB			0x00000010
 #define BNX2_DRV_PULSE_SEQ_MASK			 0x00007fff
@@ -6845,6 +6851,30 @@ struct fw_info {
  * This is used for debugging. */
 #define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE	 0x00080000
 
+#define BNX2_DRV_MB_ARG0			0x00000014
+#define BNX2_NETLINK_SET_LINK_SPEED_10HALF	 (1<<0)
+#define BNX2_NETLINK_SET_LINK_SPEED_10FULL	 (1<<1)
+#define BNX2_NETLINK_SET_LINK_SPEED_10		 \
+	(BNX2_NETLINK_SET_LINK_SPEED_10HALF |	 \
+	 BNX2_NETLINK_SET_LINK_SPEED_10FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_100HALF	 (1<<2)
+#define BNX2_NETLINK_SET_LINK_SPEED_100FULL	 (1<<3)
+#define BNX2_NETLINK_SET_LINK_SPEED_100		 \
+	(BNX2_NETLINK_SET_LINK_SPEED_100HALF |	 \
+	 BNX2_NETLINK_SET_LINK_SPEED_100FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GHALF	 (1<<4)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GFULL	 (1<<5)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5HALF	 (1<<6)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5FULL	 (1<<7)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GHALF	 (1<<8)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GFULL	 (1<<9)
+#define BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG	 (1<<10)
+#define BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE	 (1<<11)
+#define BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE	 (1<<12)
+#define BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE	 (1<<13)
+#define BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED	 (1<<14)
+#define BNX2_NETLINK_SET_LINK_PHY_RESET		 (1<<15)
+
 #define BNX2_DEV_INFO_SIGNATURE			0x00000020
 #define BNX2_DEV_INFO_SIGNATURE_MAGIC		 0x44564900
 #define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK	 0xffffff00
@@ -7006,6 +7036,8 @@ struct fw_info {
 #define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK	 0xffff
 #define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE	 0x10000
 
+#define BNX2_MFW_VER_PTR			0x00000014c
+
 #define BNX2_BC_STATE_RESET_TYPE		0x000001c0
 #define BNX2_BC_STATE_RESET_TYPE_SIG		 0x00005254
 #define BNX2_BC_STATE_RESET_TYPE_SIG_MASK	 0x0000ffff
@@ -7059,12 +7091,42 @@ struct fw_info {
 #define BNX2_BC_STATE_ERR_NO_RXP		 (BNX2_BC_STATE_SIGN | 0x0600)
 #define BNX2_BC_STATE_ERR_TOO_MANY_RBUF		 (BNX2_BC_STATE_SIGN | 0x0700)
 
+#define BNX2_BC_STATE_CONDITION			0x000001c8
+#define BNX2_CONDITION_MFW_RUN_UNKNOWN		 0x00000000
+#define BNX2_CONDITION_MFW_RUN_IPMI		 0x00002000
+#define BNX2_CONDITION_MFW_RUN_UMP		 0x00004000
+#define BNX2_CONDITION_MFW_RUN_NCSI		 0x00006000
+#define BNX2_CONDITION_MFW_RUN_NONE		 0x0000e000
+#define BNX2_CONDITION_MFW_RUN_MASK		 0x0000e000
+
 #define BNX2_BC_STATE_DEBUG_CMD			0x1dc
 #define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE	 0x42440000
 #define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK	 0xffff0000
 #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK	 0xffff
 #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE	 0xffff
 
+#define BNX2_FW_EVT_CODE_MB			0x354
+#define BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT 0x00000000
+#define BNX2_FW_EVT_CODE_LINK_EVENT		 0x00000001
+
+#define BNX2_DRV_ACK_CAP_MB			0x364
+#define BNX2_DRV_ACK_CAP_SIGNATURE		 0x35450000
+#define BNX2_CAPABILITY_SIGNATURE_MASK		 0xFFFF0000
+
+#define BNX2_FW_CAP_MB				0x368
+#define BNX2_FW_CAP_SIGNATURE			 0xaa550000
+#define BNX2_FW_ACK_DRV_SIGNATURE		 0x52500000
+#define BNX2_FW_CAP_SIGNATURE_MASK		 0xffff0000
+#define BNX2_FW_CAP_REMOTE_PHY_CAPABLE		 0x00000001
+#define BNX2_FW_CAP_REMOTE_PHY_PRESENT		 0x00000002
+
+#define BNX2_RPHY_SIGNATURE			0x36c
+#define BNX2_RPHY_LOAD_SIGNATURE		 0x5a5a5a5a
+
+#define BNX2_RPHY_FLAGS				0x370
+#define BNX2_RPHY_SERDES_LINK			0x374
+#define BNX2_RPHY_COPPER_LINK			0x378
+
 #define HOST_VIEW_SHMEM_BASE			0x167c00
 
 #endif
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6287ffbda7f7..cb9cb3013f42 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -187,7 +187,7 @@ static void bond_send_gratuitous_arp(struct bonding *bond);
 
 /*---------------------------- General routines -----------------------------*/
 
-const char *bond_mode_name(int mode)
+static const char *bond_mode_name(int mode)
 {
 	switch (mode) {
 	case BOND_MODE_ROUNDROBIN :
@@ -1224,7 +1224,8 @@ static void bond_detach_slave(struct bonding *bond, struct slave *slave)
 
 /*---------------------------------- IOCTL ----------------------------------*/
 
-int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev)
+static int bond_sethwaddr(struct net_device *bond_dev,
+			  struct net_device *slave_dev)
 {
 	dprintk("bond_dev=%p\n", bond_dev);
 	dprintk("slave_dev=%p\n", slave_dev);
@@ -1390,6 +1391,11 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		goto err_free;
 	}
 
+	res = netdev_set_master(slave_dev, bond_dev);
+	if (res) {
+		dprintk("Error %d calling netdev_set_master\n", res);
+		goto err_close;
+	}
 	/* open the slave since the application closed it */
 	res = dev_open(slave_dev);
 	if (res) {
@@ -1397,12 +1403,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 		goto err_restore_mac;
 	}
 
-	res = netdev_set_master(slave_dev, bond_dev);
-	if (res) {
-		dprintk("Error %d calling netdev_set_master\n", res);
-		goto err_close;
-	}
-
 	new_slave->dev = slave_dev;
 	slave_dev->priv_flags |= IFF_BONDING;
 
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index a89102116ccb..6dcbd25e3ef0 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -301,13 +301,11 @@ int bond_create_slave_symlinks(struct net_device *master, struct net_device *sla
 void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave);
 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_release(struct net_device *bond_dev, struct net_device *slave_dev);
-int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_dev);
 void bond_mii_monitor(struct net_device *bond_dev);
 void bond_loadbalance_arp_mon(struct net_device *bond_dev);
 void bond_activebackup_arp_mon(struct net_device *bond_dev);
 void bond_set_mode_ops(struct bonding *bond, int mode);
 int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl);
-const char *bond_mode_name(int mode);
 void bond_select_active_slave(struct bonding *bond);
 void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
 void bond_register_arp(struct bonding *);
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 59b9943b077d..f6e4030c73d1 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -3422,21 +3422,19 @@ done:
 static void cas_check_pci_invariants(struct cas *cp)
 {
 	struct pci_dev *pdev = cp->pdev;
-	u8 rev;
 
 	cp->cas_flags = 0;
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 	if ((pdev->vendor == PCI_VENDOR_ID_SUN) &&
 	    (pdev->device == PCI_DEVICE_ID_SUN_CASSINI)) {
-		if (rev >= CAS_ID_REVPLUS)
+		if (pdev->revision >= CAS_ID_REVPLUS)
 			cp->cas_flags |= CAS_FLAG_REG_PLUS;
-		if (rev < CAS_ID_REVPLUS02u)
+		if (pdev->revision < CAS_ID_REVPLUS02u)
 			cp->cas_flags |= CAS_FLAG_TARGET_ABORT;
 
 		/* Original Cassini supports HW CSUM, but it's not
 		 * enabled by default as it can trigger TX hangs.
 		 */
-		if (rev < CAS_ID_REV2)
+		if (pdev->revision < CAS_ID_REV2)
 			cp->cas_flags |= CAS_FLAG_NO_HW_CSUM;
 	} else {
 		/* Only sun has original cassini chips.  */
@@ -4919,13 +4917,13 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	pci_cmd &= ~PCI_COMMAND_SERR;
 	pci_cmd |= PCI_COMMAND_PARITY;
 	pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
-	if (pci_set_mwi(pdev))
+	if (pci_try_set_mwi(pdev))
 		printk(KERN_WARNING PFX "Could not enable MWI for %s\n",
 		       pci_name(pdev));
 
 	/*
 	 * On some architectures, the default cache line size set
-	 * by pci_set_mwi reduces perforamnce.  We have to increase
+	 * by pci_try_set_mwi reduces perforamnce.  We have to increase
 	 * it for this case.  To start, we'll print some configuration
 	 * data.
 	 */
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 80c3d8f268a7..ab72563b81ee 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -71,27 +71,29 @@ enum {				/* adapter flags */
 	QUEUES_BOUND = (1 << 3),
 };
 
+struct fl_pg_chunk {
+	struct page *page;
+	void *va;
+	unsigned int offset;
+};
+
 struct rx_desc;
 struct rx_sw_desc;
 
-struct sge_fl_page {
-	struct skb_frag_struct frag;
-	unsigned char *va;
-};
-
-struct sge_fl {			/* SGE per free-buffer list state */
-	unsigned int buf_size;	/* size of each Rx buffer */
-	unsigned int credits;	/* # of available Rx buffers */
-	unsigned int size;	/* capacity of free list */
-	unsigned int cidx;	/* consumer index */
-	unsigned int pidx;	/* producer index */
-	unsigned int gen;	/* free list generation */
-	unsigned int cntxt_id;	/* SGE context id for the free list */
-	struct sge_fl_page page;
-	struct rx_desc *desc;	/* address of HW Rx descriptor ring */
-	struct rx_sw_desc *sdesc;	/* address of SW Rx descriptor ring */
-	dma_addr_t phys_addr;	/* physical address of HW ring start */
-	unsigned long empty;	/* # of times queue ran out of buffers */
+struct sge_fl {                     /* SGE per free-buffer list state */
+	unsigned int buf_size;      /* size of each Rx buffer */
+	unsigned int credits;       /* # of available Rx buffers */
+	unsigned int size;          /* capacity of free list */
+	unsigned int cidx;          /* consumer index */
+	unsigned int pidx;          /* producer index */
+	unsigned int gen;           /* free list generation */
+	struct fl_pg_chunk pg_chunk;/* page chunk cache */
+	unsigned int use_pages;     /* whether FL uses pages or sk_buffs */
+	struct rx_desc *desc;       /* address of HW Rx descriptor ring */
+	struct rx_sw_desc *sdesc;   /* address of SW Rx descriptor ring */
+	dma_addr_t   phys_addr;     /* physical address of HW ring start */
+	unsigned int cntxt_id;      /* SGE context id for the free list */
+	unsigned long empty;        /* # of times queue ran out of buffers */
 	unsigned long alloc_failed; /* # of times buffer allocation failed */
 };
 
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 8d1379633698..16378004507a 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -101,6 +101,7 @@ enum {
 	TCB_SIZE = 128,		/* TCB size */
 	NMTUS = 16,		/* size of MTU table */
 	NCCTRL_WIN = 32,	/* # of congestion control windows */
+	PROTO_SRAM_LINES = 128, /* size of TP sram */
 };
 
 #define MAX_RX_COALESCING_LEN 16224U
@@ -124,6 +125,30 @@ enum {				/* adapter interrupt-maintained statistics */
 };
 
 enum {
+	TP_VERSION_MAJOR	= 1,
+	TP_VERSION_MINOR	= 0,
+	TP_VERSION_MICRO	= 44
+};
+
+#define S_TP_VERSION_MAJOR		16
+#define M_TP_VERSION_MAJOR		0xFF
+#define V_TP_VERSION_MAJOR(x)		((x) << S_TP_VERSION_MAJOR)
+#define G_TP_VERSION_MAJOR(x)		\
+	    (((x) >> S_TP_VERSION_MAJOR) & M_TP_VERSION_MAJOR)
+
+#define S_TP_VERSION_MINOR		8
+#define M_TP_VERSION_MINOR		0xFF
+#define V_TP_VERSION_MINOR(x)		((x) << S_TP_VERSION_MINOR)
+#define G_TP_VERSION_MINOR(x)		\
+	    (((x) >> S_TP_VERSION_MINOR) & M_TP_VERSION_MINOR)
+
+#define S_TP_VERSION_MICRO		0
+#define M_TP_VERSION_MICRO		0xFF
+#define V_TP_VERSION_MICRO(x)		((x) << S_TP_VERSION_MICRO)
+#define G_TP_VERSION_MICRO(x)		\
+	    (((x) >> S_TP_VERSION_MICRO) & M_TP_VERSION_MICRO)
+
+enum {
 	SGE_QSETS = 8,		/* # of SGE Tx/Rx/RspQ sets */
 	SGE_RXQ_PER_SET = 2,	/* # of Rx queues per set */
 	SGE_TXQ_PER_SET = 3	/* # of Tx queues per set */
@@ -654,6 +679,9 @@ const struct adapter_info *t3_get_adapter_info(unsigned int board_id);
 int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data);
 int t3_seeprom_write(struct adapter *adapter, u32 addr, u32 data);
 int t3_seeprom_wp(struct adapter *adapter, int enable);
+int t3_check_tpsram_version(struct adapter *adapter);
+int t3_check_tpsram(struct adapter *adapter, u8 *tp_ram, unsigned int size);
+int t3_set_proto_sram(struct adapter *adap, u8 *data);
 int t3_read_flash(struct adapter *adapter, unsigned int addr,
 		  unsigned int nwords, u32 *data, int byte_oriented);
 int t3_load_fw(struct adapter *adapter, const u8 * fw_data, unsigned int size);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index d8a1f5452c51..6fd1e5241833 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -43,6 +43,7 @@
 #include <linux/proc_fs.h>
 #include <linux/rtnetlink.h>
 #include <linux/firmware.h>
+#include <linux/log2.h>
 #include <asm/uaccess.h>
 
 #include "common.h"
@@ -1818,8 +1819,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 			return -EBUSY;
 		if (copy_from_user(&m, useraddr, sizeof(m)))
 			return -EFAULT;
-		if (!m.rx_pg_sz || (m.rx_pg_sz & (m.rx_pg_sz - 1)) ||
-			!m.tx_pg_sz || (m.tx_pg_sz & (m.tx_pg_sz - 1)))
+		if (!is_power_of_2(m.rx_pg_sz) ||
+			!is_power_of_2(m.tx_pg_sz))
 			return -EINVAL;	/* not power of 2 */
 		if (!(m.rx_pg_sz & 0x14000))
 			return -EINVAL;	/* not 16KB or 64KB */
@@ -2088,6 +2089,42 @@ static void cxgb_netpoll(struct net_device *dev)
 }
 #endif
 
+#define TPSRAM_NAME "t3%c_protocol_sram-%d.%d.%d.bin"
+int update_tpsram(struct adapter *adap)
+{
+	const struct firmware *tpsram;
+	char buf[64];
+	struct device *dev = &adap->pdev->dev;
+	int ret;
+	char rev;
+	
+	rev = adap->params.rev == T3_REV_B2 ? 'b' : 'a';
+
+	snprintf(buf, sizeof(buf), TPSRAM_NAME, rev,
+		 TP_VERSION_MAJOR, TP_VERSION_MINOR, TP_VERSION_MICRO);
+
+	ret = request_firmware(&tpsram, buf, dev);
+	if (ret < 0) {
+		dev_err(dev, "could not load TP SRAM: unable to load %s\n",
+			buf);
+		return ret;
+	}
+	
+	ret = t3_check_tpsram(adap, tpsram->data, tpsram->size);
+	if (ret)
+		goto release_tpsram;	
+
+	ret = t3_set_proto_sram(adap, tpsram->data);
+	if (ret)
+		dev_err(dev, "loading protocol SRAM failed\n");
+
+release_tpsram:
+	release_firmware(tpsram);
+	
+	return ret;
+}
+
+
 /*
  * Periodic accumulation of MAC statistics.
  */
@@ -2437,6 +2474,13 @@ static int __devinit init_one(struct pci_dev *pdev,
 		goto out_free_dev;
 	}
 
+	err = t3_check_tpsram_version(adapter);
+	if (err == -EINVAL)
+		err = update_tpsram(adapter);
+
+	if (err)
+		goto out_free_dev;
+		
 	/*
 	 * The card is now ready to go.  If any errors occur during device
 	 * registration we do not fail the whole card but rather proceed only
diff --git a/drivers/net/cxgb3/regs.h b/drivers/net/cxgb3/regs.h
index 020859c855d7..aa80313c922e 100644
--- a/drivers/net/cxgb3/regs.h
+++ b/drivers/net/cxgb3/regs.h
@@ -1160,6 +1160,8 @@
 
 #define A_TP_MOD_CHANNEL_WEIGHT 0x434
 
+#define A_TP_MOD_RATE_LIMIT 0x438
+
 #define A_TP_PIO_ADDR 0x440
 
 #define A_TP_PIO_DATA 0x444
@@ -1214,6 +1216,15 @@
 #define G_TXDROPCNTCH0RCVD(x) (((x) >> S_TXDROPCNTCH0RCVD) & \
 			       M_TXDROPCNTCH0RCVD)
 
+#define A_TP_PROXY_FLOW_CNTL 0x4b0
+
+#define A_TP_EMBED_OP_FIELD0 0x4e8
+#define A_TP_EMBED_OP_FIELD1 0x4ec
+#define A_TP_EMBED_OP_FIELD2 0x4f0
+#define A_TP_EMBED_OP_FIELD3 0x4f4
+#define A_TP_EMBED_OP_FIELD4 0x4f8
+#define A_TP_EMBED_OP_FIELD5 0x4fc
+
 #define A_ULPRX_CTL 0x500
 
 #define S_ROUND_ROBIN    4
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index a60ec4d4707c..a2cfd68ac757 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -46,23 +46,16 @@
 
 #define SGE_RX_SM_BUF_SIZE 1536
 
-/*
- * If USE_RX_PAGE is defined, the small freelist populated with (partial)
- * pages instead of skbs. Pages are carved up into RX_PAGE_SIZE chunks (must
- * be a multiple of the host page size).
- */
-#define USE_RX_PAGE
-#define RX_PAGE_SIZE 2048
-
-/*
- * skb freelist packets are copied into a new skb (and the freelist one is 
- * reused) if their len is <= 
- */
 #define SGE_RX_COPY_THRES  256
+#define SGE_RX_PULL_LEN    128
 
 /*
- * Minimum number of freelist entries before we start dropping TUNNEL frames.
+ * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks.
+ * It must be a divisor of PAGE_SIZE.  If set to 0 FL0 will use sk_buffs
+ * directly.
  */
+#define FL0_PG_CHUNK_SIZE  2048
+
 #define SGE_RX_DROP_THRES 16
 
 /*
@@ -100,12 +93,12 @@ struct tx_sw_desc {		/* SW state per Tx descriptor */
 	struct sk_buff *skb;
 };
 
-struct rx_sw_desc {		/* SW state per Rx descriptor */
+struct rx_sw_desc {                /* SW state per Rx descriptor */
 	union {
 		struct sk_buff *skb;
-		struct sge_fl_page page;
-	} t;
-	 DECLARE_PCI_UNMAP_ADDR(dma_addr);
+		struct fl_pg_chunk pg_chunk;
+	};
+	DECLARE_PCI_UNMAP_ADDR(dma_addr);
 };
 
 struct rsp_desc {		/* response queue descriptor */
@@ -351,27 +344,26 @@ static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
 
 		pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
 				 q->buf_size, PCI_DMA_FROMDEVICE);
-
-		if (q->buf_size != RX_PAGE_SIZE) {
-			kfree_skb(d->t.skb);
-			d->t.skb = NULL;
+		if (q->use_pages) {
+			put_page(d->pg_chunk.page);
+			d->pg_chunk.page = NULL;
 		} else {
-			if (d->t.page.frag.page)
-				put_page(d->t.page.frag.page);
-			d->t.page.frag.page = NULL;
+			kfree_skb(d->skb);
+			d->skb = NULL;
 		}
 		if (++cidx == q->size)
 			cidx = 0;
 	}
 
-	if (q->page.frag.page)
-		put_page(q->page.frag.page);
-	q->page.frag.page = NULL;
+	if (q->pg_chunk.page) {
+		__free_page(q->pg_chunk.page);
+		q->pg_chunk.page = NULL;
+	}
 }
 
 /**
  *	add_one_rx_buf - add a packet buffer to a free-buffer list
- *	@va: va of the buffer to add
+ *	@va:  buffer start VA
  *	@len: the buffer length
  *	@d: the HW Rx descriptor to write
  *	@sd: the SW Rx descriptor to write
@@ -381,7 +373,7 @@ static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
  *	Add a buffer of the given length to the supplied HW and SW Rx
  *	descriptors.
  */
-static inline void add_one_rx_buf(unsigned char *va, unsigned int len,
+static inline void add_one_rx_buf(void *va, unsigned int len,
 				  struct rx_desc *d, struct rx_sw_desc *sd,
 				  unsigned int gen, struct pci_dev *pdev)
 {
@@ -397,6 +389,27 @@ static inline void add_one_rx_buf(unsigned char *va, unsigned int len,
 	d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
 }
 
+static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp)
+{
+	if (!q->pg_chunk.page) {
+		q->pg_chunk.page = alloc_page(gfp);
+		if (unlikely(!q->pg_chunk.page))
+			return -ENOMEM;
+		q->pg_chunk.va = page_address(q->pg_chunk.page);
+		q->pg_chunk.offset = 0;
+	}
+	sd->pg_chunk = q->pg_chunk;
+
+	q->pg_chunk.offset += q->buf_size;
+	if (q->pg_chunk.offset == PAGE_SIZE)
+		q->pg_chunk.page = NULL;
+	else {
+		q->pg_chunk.va += q->buf_size;
+		get_page(q->pg_chunk.page);
+	}
+	return 0;
+}
+
 /**
  *	refill_fl - refill an SGE free-buffer list
  *	@adapter: the adapter
@@ -410,49 +423,29 @@ static inline void add_one_rx_buf(unsigned char *va, unsigned int len,
  */
 static void refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
 {
+	void *buf_start;
 	struct rx_sw_desc *sd = &q->sdesc[q->pidx];
 	struct rx_desc *d = &q->desc[q->pidx];
-	struct sge_fl_page *p = &q->page;
 
 	while (n--) {
-		unsigned char *va;
-
-		if (unlikely(q->buf_size != RX_PAGE_SIZE)) {
-			struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
-
-			if (!skb) {
-				q->alloc_failed++;
+		if (q->use_pages) {
+			if (unlikely(alloc_pg_chunk(q, sd, gfp))) {
+nomem:				q->alloc_failed++;
 				break;
 			}
-			va = skb->data;
-			sd->t.skb = skb;
+			buf_start = sd->pg_chunk.va;
 		} else {
-			if (!p->frag.page) {
-				p->frag.page = alloc_pages(gfp, 0);
-				if (unlikely(!p->frag.page)) {
-					q->alloc_failed++;
-					break;
-				} else {
-					p->frag.size = RX_PAGE_SIZE;
-					p->frag.page_offset = 0;
-					p->va = page_address(p->frag.page);
-				}
-			}
+			struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
 
-			memcpy(&sd->t, p, sizeof(*p));
-			va = p->va;
+			if (!skb)
+				goto nomem;
 
-			p->frag.page_offset += RX_PAGE_SIZE;
-			BUG_ON(p->frag.page_offset > PAGE_SIZE);
-			p->va += RX_PAGE_SIZE;
-			if (p->frag.page_offset == PAGE_SIZE)
-				p->frag.page = NULL;
-			else
-				get_page(p->frag.page);
+			sd->skb = skb;
+			buf_start = skb->data;
 		}
 
-		add_one_rx_buf(va, q->buf_size, d, sd, q->gen, adap->pdev);
-
+		add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen,
+			       adap->pdev);
 		d++;
 		sd++;
 		if (++q->pidx == q->size) {
@@ -487,7 +480,7 @@ static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
 	struct rx_desc *from = &q->desc[idx];
 	struct rx_desc *to = &q->desc[q->pidx];
 
-	memcpy(&q->sdesc[q->pidx], &q->sdesc[idx], sizeof(struct rx_sw_desc));
+	q->sdesc[q->pidx] = q->sdesc[idx];
 	to->addr_lo = from->addr_lo;	/* already big endian */
 	to->addr_hi = from->addr_hi;	/* likewise */
 	wmb();
@@ -650,6 +643,132 @@ static inline unsigned int flits_to_desc(unsigned int n)
 }
 
 /**
+ *	get_packet - return the next ingress packet buffer from a free list
+ *	@adap: the adapter that received the packet
+ *	@fl: the SGE free list holding the packet
+ *	@len: the packet length including any SGE padding
+ *	@drop_thres: # of remaining buffers before we start dropping packets
+ *
+ *	Get the next packet from a free list and complete setup of the
+ *	sk_buff.  If the packet is small we make a copy and recycle the
+ *	original buffer, otherwise we use the original buffer itself.  If a
+ *	positive drop threshold is supplied packets are dropped and their
+ *	buffers recycled if (a) the number of remaining buffers is under the
+ *	threshold and the packet is too big to copy, or (b) the packet should
+ *	be copied but there is no memory for the copy.
+ */
+static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
+				  unsigned int len, unsigned int drop_thres)
+{
+	struct sk_buff *skb = NULL;
+	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+
+	prefetch(sd->skb->data);
+	fl->credits--;
+
+	if (len <= SGE_RX_COPY_THRES) {
+		skb = alloc_skb(len, GFP_ATOMIC);
+		if (likely(skb != NULL)) {
+			__skb_put(skb, len);
+			pci_dma_sync_single_for_cpu(adap->pdev,
+					    pci_unmap_addr(sd, dma_addr), len,
+					    PCI_DMA_FROMDEVICE);
+			memcpy(skb->data, sd->skb->data, len);
+			pci_dma_sync_single_for_device(adap->pdev,
+					    pci_unmap_addr(sd, dma_addr), len,
+					    PCI_DMA_FROMDEVICE);
+		} else if (!drop_thres)
+			goto use_orig_buf;
+recycle:
+		recycle_rx_buf(adap, fl, fl->cidx);
+		return skb;
+	}
+
+	if (unlikely(fl->credits < drop_thres))
+		goto recycle;
+
+use_orig_buf:
+	pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
+			 fl->buf_size, PCI_DMA_FROMDEVICE);
+	skb = sd->skb;
+	skb_put(skb, len);
+	__refill_fl(adap, fl);
+	return skb;
+}
+
+/**
+ *	get_packet_pg - return the next ingress packet buffer from a free list
+ *	@adap: the adapter that received the packet
+ *	@fl: the SGE free list holding the packet
+ *	@len: the packet length including any SGE padding
+ *	@drop_thres: # of remaining buffers before we start dropping packets
+ *
+ *	Get the next packet from a free list populated with page chunks.
+ *	If the packet is small we make a copy and recycle the original buffer,
+ *	otherwise we attach the original buffer as a page fragment to a fresh
+ *	sk_buff.  If a positive drop threshold is supplied packets are dropped
+ *	and their buffers recycled if (a) the number of remaining buffers is
+ *	under the threshold and the packet is too big to copy, or (b) there's
+ *	no system memory.
+ *
+ * 	Note: this function is similar to @get_packet but deals with Rx buffers
+ * 	that are page chunks rather than sk_buffs.
+ */
+static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl,
+				     unsigned int len, unsigned int drop_thres)
+{
+	struct sk_buff *skb = NULL;
+	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+
+	if (len <= SGE_RX_COPY_THRES) {
+		skb = alloc_skb(len, GFP_ATOMIC);
+		if (likely(skb != NULL)) {
+			__skb_put(skb, len);
+			pci_dma_sync_single_for_cpu(adap->pdev,
+					    pci_unmap_addr(sd, dma_addr), len,
+					    PCI_DMA_FROMDEVICE);
+			memcpy(skb->data, sd->pg_chunk.va, len);
+			pci_dma_sync_single_for_device(adap->pdev,
+					    pci_unmap_addr(sd, dma_addr), len,
+					    PCI_DMA_FROMDEVICE);
+		} else if (!drop_thres)
+			return NULL;
+recycle:
+		fl->credits--;
+		recycle_rx_buf(adap, fl, fl->cidx);
+		return skb;
+	}
+
+	if (unlikely(fl->credits <= drop_thres))
+		goto recycle;
+
+	skb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC);
+	if (unlikely(!skb)) {
+		if (!drop_thres)
+			return NULL;
+		goto recycle;
+	}
+
+	pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
+			 fl->buf_size, PCI_DMA_FROMDEVICE);
+	__skb_put(skb, SGE_RX_PULL_LEN);
+	memcpy(skb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN);
+	skb_fill_page_desc(skb, 0, sd->pg_chunk.page,
+			   sd->pg_chunk.offset + SGE_RX_PULL_LEN,
+			   len - SGE_RX_PULL_LEN);
+	skb->len = len;
+	skb->data_len = len - SGE_RX_PULL_LEN;
+	skb->truesize += skb->data_len;
+
+	fl->credits--;
+	/*
+	 * We do not refill FLs here, we let the caller do it to overlap a
+	 * prefetch.
+	 */
+	return skb;
+}
+
+/**
  *	get_imm_packet - return the next ingress packet buffer from a response
  *	@resp: the response descriptor containing the packet data
  *
@@ -1715,85 +1834,6 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 		netif_rx(skb);
 }
 
-#define SKB_DATA_SIZE 128
-
-static void skb_data_init(struct sk_buff *skb, struct sge_fl_page *p,
-			  unsigned int len)
-{
-	skb->len = len;
-	if (len <= SKB_DATA_SIZE) {
-		skb_copy_to_linear_data(skb, p->va, len);
-		skb->tail += len;
-		put_page(p->frag.page);
-	} else {
-		skb_copy_to_linear_data(skb, p->va, SKB_DATA_SIZE);
-		skb_shinfo(skb)->frags[0].page = p->frag.page;
-		skb_shinfo(skb)->frags[0].page_offset =
-		    p->frag.page_offset + SKB_DATA_SIZE;
-		skb_shinfo(skb)->frags[0].size = len - SKB_DATA_SIZE;
-		skb_shinfo(skb)->nr_frags = 1;
-		skb->data_len = len - SKB_DATA_SIZE;
-		skb->tail += SKB_DATA_SIZE;
-		skb->truesize += skb->data_len;
-	}
-}
-
-/**
-*      get_packet - return the next ingress packet buffer from a free list
-*      @adap: the adapter that received the packet
-*      @fl: the SGE free list holding the packet
-*      @len: the packet length including any SGE padding
-*      @drop_thres: # of remaining buffers before we start dropping packets
-*
-*      Get the next packet from a free list and complete setup of the
-*      sk_buff.  If the packet is small we make a copy and recycle the
-*      original buffer, otherwise we use the original buffer itself.  If a
-*      positive drop threshold is supplied packets are dropped and their
-*      buffers recycled if (a) the number of remaining buffers is under the
-*      threshold and the packet is too big to copy, or (b) the packet should
-*      be copied but there is no memory for the copy.
-*/
-static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
-				  unsigned int len, unsigned int drop_thres)
-{
-	struct sk_buff *skb = NULL;
-	struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
-
-	prefetch(sd->t.skb->data);
-
-	if (len <= SGE_RX_COPY_THRES) {
-		skb = alloc_skb(len, GFP_ATOMIC);
-		if (likely(skb != NULL)) {
-			struct rx_desc *d = &fl->desc[fl->cidx];
-			dma_addr_t mapping =
-			    (dma_addr_t)((u64) be32_to_cpu(d->addr_hi) << 32 |
-					 be32_to_cpu(d->addr_lo));
-
-			__skb_put(skb, len);
-			pci_dma_sync_single_for_cpu(adap->pdev, mapping, len,
-						    PCI_DMA_FROMDEVICE);
-			skb_copy_from_linear_data(sd->t.skb, skb->data, len);
-			pci_dma_sync_single_for_device(adap->pdev, mapping, len,
-						       PCI_DMA_FROMDEVICE);
-		} else if (!drop_thres)
-			goto use_orig_buf;
-recycle:
-		recycle_rx_buf(adap, fl, fl->cidx);
-		return skb;
-	}
-
-	if (unlikely(fl->credits < drop_thres))
-		goto recycle;
-
-use_orig_buf:
-	pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
-			 fl->buf_size, PCI_DMA_FROMDEVICE);
-	skb = sd->t.skb;
-	skb_put(skb, len);
-	__refill_fl(adap, fl);
-	return skb;
-}
-
 /**
  *	handle_rsp_cntrl_info - handles control information in a response
  *	@qs: the queue set corresponding to the response
@@ -1935,7 +1975,7 @@ static int process_responses(struct adapter *adap, struct sge_qset *qs,
 		} else if (flags & F_RSPD_IMM_DATA_VALID) {
 			skb = get_imm_packet(r);
 			if (unlikely(!skb)) {
-			      no_mem:
+no_mem:
 				q->next_holdoff = NOMEM_INTR_DELAY;
 				q->nomem++;
 				/* consume one credit since we tried */
@@ -1945,53 +1985,29 @@ static int process_responses(struct adapter *adap, struct sge_qset *qs,
 			q->imm_data++;
 			ethpad = 0;
 		} else if ((len = ntohl(r->len_cq)) != 0) {
-			struct sge_fl *fl =
-			    (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
+			struct sge_fl *fl;
 
-			if (fl->buf_size == RX_PAGE_SIZE) {
-				struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
-				struct sge_fl_page *p = &sd->t.page;
-
-				prefetch(p->va);
-				prefetch(p->va + L1_CACHE_BYTES);
+			fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
+			if (fl->use_pages) {
+				void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
 
+				prefetch(addr);
+#if L1_CACHE_BYTES < 128
+				prefetch(addr + L1_CACHE_BYTES);
+#endif
 				__refill_fl(adap, fl);
 
-				pci_unmap_single(adap->pdev,
-						 pci_unmap_addr(sd, dma_addr),
-						 fl->buf_size,
-						 PCI_DMA_FROMDEVICE);
-
-				if (eth) {
-					if (unlikely(fl->credits <
-						     SGE_RX_DROP_THRES))
-						goto eth_recycle;
-
-					skb = alloc_skb(SKB_DATA_SIZE,
-							GFP_ATOMIC);
-					if (unlikely(!skb)) {
-eth_recycle:
-						q->rx_drops++;
-						recycle_rx_buf(adap, fl,
-							       fl->cidx);
-						goto eth_done;
-					}
-				} else {
-					skb = alloc_skb(SKB_DATA_SIZE,
-							GFP_ATOMIC);
-					if (unlikely(!skb))
-						goto no_mem;
-				}
-
-				skb_data_init(skb, p, G_RSPD_LEN(len));
-eth_done:
-				fl->credits--;
-				q->eth_pkts++;
-			} else {
-				fl->credits--;
+				skb = get_packet_pg(adap, fl, G_RSPD_LEN(len),
+						 eth ? SGE_RX_DROP_THRES : 0);
+			} else
 				skb = get_packet(adap, fl, G_RSPD_LEN(len),
 						 eth ? SGE_RX_DROP_THRES : 0);
-			}
+			if (unlikely(!skb)) {
+				if (!eth)
+					goto no_mem;
+				q->rx_drops++;
+			} else if (unlikely(r->rss_hdr.opcode == CPL_TRACE_PKT))
+				__skb_pull(skb, 2);
 
 			if (++fl->cidx == fl->size)
 				fl->cidx = 0;
@@ -2016,20 +2032,15 @@ eth_done:
 			q->credits = 0;
 		}
 
-		if (skb) {
-			/* Preserve the RSS info in csum & priority */
-			skb->csum = rss_hi;
-			skb->priority = rss_lo;
-
+		if (likely(skb != NULL)) {
 			if (eth)
 				rx_eth(adap, q, skb, ethpad);
 			else {
-				if (unlikely(r->rss_hdr.opcode ==
-					     CPL_TRACE_PKT))
-					__skb_pull(skb, ethpad);
-
-				ngathered = rx_offload(&adap->tdev, q,
-						       skb, offload_skbs,
+				/* Preserve the RSS info in csum & priority */
+				skb->csum = rss_hi;
+				skb->priority = rss_lo;
+				ngathered = rx_offload(&adap->tdev, q, skb,
+						       offload_skbs,
 						       ngathered);
 			}
 		}
@@ -2635,25 +2646,15 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
 	q->txq[TXQ_ETH].stop_thres = nports *
 	    flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
 
-	if (!is_offload(adapter)) {
-#ifdef USE_RX_PAGE
-		q->fl[0].buf_size = RX_PAGE_SIZE;
+#if FL0_PG_CHUNK_SIZE > 0
+	q->fl[0].buf_size = FL0_PG_CHUNK_SIZE;
 #else
-		q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + 2 +
-		    sizeof(struct cpl_rx_pkt);
+	q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + sizeof(struct cpl_rx_data);
 #endif
-		q->fl[1].buf_size = MAX_FRAME_SIZE + 2 +
-		    sizeof(struct cpl_rx_pkt);
-	} else {
-#ifdef USE_RX_PAGE
-		q->fl[0].buf_size = RX_PAGE_SIZE;
-#else
-		q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE +
-		    sizeof(struct cpl_rx_data);
-#endif
-		q->fl[1].buf_size = (16 * 1024) -
-		    SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-	}
+	q->fl[0].use_pages = FL0_PG_CHUNK_SIZE > 0;
+	q->fl[1].buf_size = is_offload(adapter) ?
+		(16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
+		MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
 
 	spin_lock(&adapter->sge.reg_lock);
 
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index fb485d0a43d8..dd3149d94ba8 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -847,6 +847,64 @@ static int t3_write_flash(struct adapter *adapter, unsigned int addr,
 	return 0;
 }
 
+/**
+ *	t3_check_tpsram_version - read the tp sram version
+ *	@adapter: the adapter
+ *
+ *	Reads the protocol sram version from serial eeprom.
+ */
+int t3_check_tpsram_version(struct adapter *adapter)
+{
+	int ret;
+	u32 vers;
+	unsigned int major, minor;
+
+	/* Get version loaded in SRAM */
+	t3_write_reg(adapter, A_TP_EMBED_OP_FIELD0, 0);
+	ret = t3_wait_op_done(adapter, A_TP_EMBED_OP_FIELD0,
+			      1, 1, 5, 1);
+	if (ret)
+		return ret;
+	
+	vers = t3_read_reg(adapter, A_TP_EMBED_OP_FIELD1);
+
+	major = G_TP_VERSION_MAJOR(vers);
+	minor = G_TP_VERSION_MINOR(vers);
+
+	if (major == TP_VERSION_MAJOR && minor == TP_VERSION_MINOR) 
+		return 0;
+
+	return -EINVAL;
+}
+
+/**
+ *	t3_check_tpsram - check if provided protocol SRAM 
+ *			  is compatible with this driver
+ *	@adapter: the adapter
+ *	@tp_sram: the firmware image to write
+ *	@size: image size
+ *
+ *	Checks if an adapter's tp sram is compatible with the driver.
+ *	Returns 0 if the versions are compatible, a negative error otherwise.
+ */
+int t3_check_tpsram(struct adapter *adapter, u8 *tp_sram, unsigned int size)
+{
+	u32 csum;
+	unsigned int i;
+	const u32 *p = (const u32 *)tp_sram;
+
+	/* Verify checksum */
+	for (csum = 0, i = 0; i < size / sizeof(csum); i++)
+		csum += ntohl(p[i]);
+	if (csum != 0xffffffff) {
+		CH_ERR(adapter, "corrupted protocol SRAM image, checksum %u\n",
+		       csum);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 enum fw_version_type {
 	FW_VERSION_N3,
 	FW_VERSION_T3
@@ -921,7 +979,7 @@ static int t3_flash_erase_sectors(struct adapter *adapter, int start, int end)
 /*
  *	t3_load_fw - download firmware
  *	@adapter: the adapter
- *	@fw_data: the firrware image to write
+ *	@fw_data: the firmware image to write
  *	@size: image size
  *
  *	Write the supplied firmware image to the card's serial flash.
@@ -2362,7 +2420,7 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
 		     F_TCPCHECKSUMOFFLOAD | V_IPTTL(64));
 	t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) |
 		     F_MTUENABLE | V_WINDOWSCALEMODE(1) |
-		     V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1));
+		     V_TIMESTAMPSMODE(0) | V_SACKMODE(1) | V_SACKRX(1));
 	t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) |
 		     V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
 		     V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
@@ -2371,16 +2429,18 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
 			 F_IPV6ENABLE | F_NICMODE);
 	t3_write_reg(adap, A_TP_TX_RESOURCE_LIMIT, 0x18141814);
 	t3_write_reg(adap, A_TP_PARA_REG4, 0x5050105);
-	t3_set_reg_field(adap, A_TP_PARA_REG6,
-			 adap->params.rev > 0 ? F_ENABLEESND : F_T3A_ENABLEESND,
-			 0);
+	t3_set_reg_field(adap, A_TP_PARA_REG6, 0,
+			 adap->params.rev > 0 ? F_ENABLEESND :
+			 F_T3A_ENABLEESND);
 
 	t3_set_reg_field(adap, A_TP_PC_CONFIG,
-			 F_ENABLEEPCMDAFULL | F_ENABLEOCSPIFULL,
-			 F_TXDEFERENABLE | F_HEARBEATDACK | F_TXCONGESTIONMODE |
-			 F_RXCONGESTIONMODE);
+			 F_ENABLEEPCMDAFULL,
+			 F_ENABLEOCSPIFULL |F_TXDEFERENABLE | F_HEARBEATDACK |
+			 F_TXCONGESTIONMODE | F_RXCONGESTIONMODE);
 	t3_set_reg_field(adap, A_TP_PC_CONFIG2, F_CHDRAFULL, 0);
-
+	t3_write_reg(adap, A_TP_PROXY_FLOW_CNTL, 1080);
+	t3_write_reg(adap, A_TP_PROXY_FLOW_CNTL, 1000);
+	
 	if (adap->params.rev > 0) {
 		tp_wr_indirect(adap, A_TP_EGRESS_CONFIG, F_REWRITEFORCETOSIZE);
 		t3_set_reg_field(adap, A_TP_PARA_REG3, F_TXPACEAUTO,
@@ -2390,9 +2450,10 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
 	} else
 		t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEFIXED);
 
-	t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0x12121212);
-	t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0x12121212);
-	t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0x1212);
+	t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0);
+	t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0);
+	t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0);
+	t3_write_reg(adap, A_TP_MOD_RATE_LIMIT, 0xf2200000);
 }
 
 /* Desired TP timer resolution in usec */
@@ -2468,6 +2529,7 @@ int t3_tp_set_coalescing_size(struct adapter *adap, unsigned int size, int psh)
 		val |= F_RXCOALESCEENABLE;
 		if (psh)
 			val |= F_RXCOALESCEPSHEN;
+		size = min(MAX_RX_COALESCING_LEN, size);
 		t3_write_reg(adap, A_TP_PARA_REG2, V_RXCOALESCESIZE(size) |
 			     V_MAXRXDATA(MAX_RX_COALESCING_LEN));
 	}
@@ -2496,11 +2558,11 @@ static void __devinit init_mtus(unsigned short mtus[])
 	 * it can accomodate max size TCP/IP headers when SACK and timestamps
 	 * are enabled and still have at least 8 bytes of payload.
 	 */
-	mtus[0] = 88;
-	mtus[1] = 256;
-	mtus[2] = 512;
-	mtus[3] = 576;
-	mtus[4] = 808;
+	mtus[1] = 88;
+	mtus[1] = 88;
+	mtus[2] = 256;
+	mtus[3] = 512;
+	mtus[4] = 576;
 	mtus[5] = 1024;
 	mtus[6] = 1280;
 	mtus[7] = 1492;
@@ -2682,6 +2744,34 @@ static void ulp_config(struct adapter *adap, const struct tp_params *p)
 	t3_write_reg(adap, A_ULPRX_TDDP_TAGMASK, 0xffffffff);
 }
 
+/**
+ *	t3_set_proto_sram - set the contents of the protocol sram
+ *	@adapter: the adapter
+ *	@data: the protocol image
+ *
+ *	Write the contents of the protocol SRAM.
+ */
+int t3_set_proto_sram(struct adapter *adap, u8 *data)
+{
+	int i;
+	u32 *buf = (u32 *)data;
+
+	for (i = 0; i < PROTO_SRAM_LINES; i++) {
+		t3_write_reg(adap, A_TP_EMBED_OP_FIELD5, cpu_to_be32(*buf++));
+		t3_write_reg(adap, A_TP_EMBED_OP_FIELD4, cpu_to_be32(*buf++));
+		t3_write_reg(adap, A_TP_EMBED_OP_FIELD3, cpu_to_be32(*buf++));
+		t3_write_reg(adap, A_TP_EMBED_OP_FIELD2, cpu_to_be32(*buf++));
+		t3_write_reg(adap, A_TP_EMBED_OP_FIELD1, cpu_to_be32(*buf++));
+		
+		t3_write_reg(adap, A_TP_EMBED_OP_FIELD0, i << 1 | 1 << 31);
+		if (t3_wait_op_done(adap, A_TP_EMBED_OP_FIELD0, 1, 1, 5, 1))
+			return -EIO;
+	}
+	t3_write_reg(adap, A_TP_EMBED_OP_FIELD0, 0);
+
+	return 0;
+}
+
 void t3_config_trace_filter(struct adapter *adapter,
 			    const struct trace_params *tp, int filter_index,
 			    int invert, int enable)
@@ -2802,7 +2892,7 @@ static void init_hw_for_avail_ports(struct adapter *adap, int nports)
 		t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0);
 		t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN |
 			     F_PORT0ACTIVE | F_ENFORCEPKT);
-		t3_write_reg(adap, A_PM1_TX_CFG, 0xc000c000);
+		t3_write_reg(adap, A_PM1_TX_CFG, 0xffffffff);
 	} else {
 		t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN);
 		t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB);
@@ -3097,7 +3187,7 @@ int t3_init_hw(struct adapter *adapter, u32 fw_params)
 	else
 		t3_set_reg_field(adapter, A_PCIX_CFG, 0, F_CLIDECEN);
 
-	t3_write_reg(adapter, A_PM1_RX_CFG, 0xf000f000);
+	t3_write_reg(adapter, A_PM1_RX_CFG, 0xffffffff);
 	init_hw_for_avail_ports(adapter, adapter->params.nports);
 	t3_sge_init(adapter, &adapter->params.sge);
 
diff --git a/drivers/net/cxgb3/version.h b/drivers/net/cxgb3/version.h
index b112317f033e..8eddd23a3a51 100644
--- a/drivers/net/cxgb3/version.h
+++ b/drivers/net/cxgb3/version.h
@@ -39,6 +39,6 @@
 
 /* Firmware version */
 #define FW_VERSION_MAJOR 4
-#define FW_VERSION_MINOR 0
+#define FW_VERSION_MINOR 1
 #define FW_VERSION_MICRO 0
 #endif				/* __CHELSIO_VERSION_H */
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 74ec64a1625d..04e3710c9082 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -250,7 +250,6 @@ rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent)
 			np->an_enable = 1;
 		mii_set_media (dev);
 	}
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
 
 	err = register_netdev (dev);
 	if (err)
@@ -866,9 +865,9 @@ receive_packet (struct net_device *dev)
 							    PCI_DMA_FROMDEVICE);
 				/* 16 byte align the IP header */
 				skb_reserve (skb, 2);
-				eth_copy_and_sum (skb,
+				skb_copy_to_linear_data (skb,
 						  np->rx_skbuff[entry]->data,
-						  pkt_len, 0);
+						  pkt_len);
 				skb_put (skb, pkt_len);
 				pci_dma_sync_single_for_device(np->pdev,
 				  			       desc->fraginfo &
@@ -879,7 +878,7 @@ receive_packet (struct net_device *dev)
 			skb->protocol = eth_type_trans (skb, dev);
 #if 0
 			/* Checksum done by hw, but csum value unavailable. */
-			if (np->pci_rev_id >= 0x0c &&
+			if (np->pdev->pci_rev_id >= 0x0c &&
 				!(frame_status & (TCPError | UDPError | IPError))) {
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
 			}
diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h
index 814c449c359f..e443065a452e 100644
--- a/drivers/net/dl2k.h
+++ b/drivers/net/dl2k.h
@@ -668,7 +668,6 @@ struct netdev_private {
 	unsigned int rx_flow:1;		/* Rx flow control enable */
 	unsigned int phy_media:1;	/* 1: fiber, 0: copper */
 	unsigned int link_status:1;	/* Current link status */
-	unsigned char pci_rev_id;	/* PCI revision ID */
 	struct netdev_desc *last_tx;	/* Last Tx descriptor used. */
 	unsigned long cur_rx, old_rx;	/* Producer/consumer ring indices */
 	unsigned long cur_tx, old_tx;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 264fa0e2e075..c3de81bf090a 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -104,6 +104,18 @@
 #define PRINTK(args...)   printk(KERN_DEBUG args)
 #endif
 
+#ifdef CONFIG_BLACKFIN
+#define readsb	insb
+#define readsw	insw
+#define readsl	insl
+#define writesb	outsb
+#define writesw	outsw
+#define writesl	outsl
+#define DM9000_IRQ_FLAGS	(IRQF_SHARED | IRQF_TRIGGER_HIGH)
+#else
+#define DM9000_IRQ_FLAGS	IRQF_SHARED
+#endif
+
 /*
  * Transmit timeout, default 5 seconds.
  */
@@ -431,6 +443,9 @@ dm9000_probe(struct platform_device *pdev)
 		db->io_addr = (void __iomem *)base;
 		db->io_data = (void __iomem *)(base + 4);
 
+		/* ensure at least we have a default set of IO routines */
+		dm9000_set_io(db, 2);
+
 	} else {
 		db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 		db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
@@ -614,7 +629,7 @@ dm9000_open(struct net_device *dev)
 
 	PRINTK2("entering dm9000_open\n");
 
-	if (request_irq(dev->irq, &dm9000_interrupt, IRQF_SHARED, dev->name, dev))
+	if (request_irq(dev->irq, &dm9000_interrupt, DM9000_IRQ_FLAGS, dev->name, dev))
 		return -EAGAIN;
 
 	/* Initialize DM9000 board */
diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c
index 60673bc292c0..756a6bcb038d 100644
--- a/drivers/net/dummy.c
+++ b/drivers/net/dummy.c
@@ -34,11 +34,12 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/moduleparam.h>
+#include <linux/rtnetlink.h>
+#include <net/rtnetlink.h>
 
 static int numdummies = 1;
 
 static int dummy_xmit(struct sk_buff *skb, struct net_device *dev);
-static struct net_device_stats *dummy_get_stats(struct net_device *dev);
 
 static int dummy_set_address(struct net_device *dev, void *p)
 {
@@ -56,13 +57,13 @@ static void set_multicast_list(struct net_device *dev)
 {
 }
 
-static void __init dummy_setup(struct net_device *dev)
+static void dummy_setup(struct net_device *dev)
 {
 	/* Initialize the device structure. */
-	dev->get_stats = dummy_get_stats;
 	dev->hard_start_xmit = dummy_xmit;
 	dev->set_multicast_list = set_multicast_list;
 	dev->set_mac_address = dummy_set_address;
+	dev->destructor = free_netdev;
 
 	/* Fill in device structure with ethernet-generic values. */
 	ether_setup(dev);
@@ -76,77 +77,80 @@ static void __init dummy_setup(struct net_device *dev)
 
 static int dummy_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	struct net_device_stats *stats = netdev_priv(dev);
-
-	stats->tx_packets++;
-	stats->tx_bytes+=skb->len;
+	dev->stats.tx_packets++;
+	dev->stats.tx_bytes += skb->len;
 
 	dev_kfree_skb(skb);
 	return 0;
 }
 
-static struct net_device_stats *dummy_get_stats(struct net_device *dev)
+static int dummy_validate(struct nlattr *tb[], struct nlattr *data[])
 {
-	return netdev_priv(dev);
+	if (tb[IFLA_ADDRESS]) {
+		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+			return -EINVAL;
+		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+			return -EADDRNOTAVAIL;
+	}
+	return 0;
 }
 
-static struct net_device **dummies;
+static struct rtnl_link_ops dummy_link_ops __read_mostly = {
+	.kind		= "dummy",
+	.setup		= dummy_setup,
+	.validate	= dummy_validate,
+};
 
 /* Number of dummy devices to be set up by this module. */
 module_param(numdummies, int, 0);
 MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
 
-static int __init dummy_init_one(int index)
+static int __init dummy_init_one(void)
 {
 	struct net_device *dev_dummy;
 	int err;
 
-	dev_dummy = alloc_netdev(sizeof(struct net_device_stats),
-				 "dummy%d", dummy_setup);
-
+	dev_dummy = alloc_netdev(0, "dummy%d", dummy_setup);
 	if (!dev_dummy)
 		return -ENOMEM;
 
-	if ((err = register_netdev(dev_dummy))) {
-		free_netdev(dev_dummy);
-		dev_dummy = NULL;
-	} else {
-		dummies[index] = dev_dummy;
-	}
+	err = dev_alloc_name(dev_dummy, dev_dummy->name);
+	if (err < 0)
+		goto err;
 
-	return err;
-}
+	dev_dummy->rtnl_link_ops = &dummy_link_ops;
+	err = register_netdevice(dev_dummy);
+	if (err < 0)
+		goto err;
+	return 0;
 
-static void dummy_free_one(int index)
-{
-	unregister_netdev(dummies[index]);
-	free_netdev(dummies[index]);
+err:
+	free_netdev(dev_dummy);
+	return err;
 }
 
 static int __init dummy_init_module(void)
 {
 	int i, err = 0;
-	dummies = kmalloc(numdummies * sizeof(void *), GFP_KERNEL);
-	if (!dummies)
-		return -ENOMEM;
+
+	rtnl_lock();
+	err = __rtnl_link_register(&dummy_link_ops);
+
 	for (i = 0; i < numdummies && !err; i++)
-		err = dummy_init_one(i);
-	if (err) {
-		i--;
-		while (--i >= 0)
-			dummy_free_one(i);
-	}
+		err = dummy_init_one();
+	if (err < 0)
+		__rtnl_link_unregister(&dummy_link_ops);
+	rtnl_unlock();
+
 	return err;
 }
 
 static void __exit dummy_cleanup_module(void)
 {
-	int i;
-	for (i = 0; i < numdummies; i++)
-		dummy_free_one(i);
-	kfree(dummies);
+	rtnl_link_unregister(&dummy_link_ops);
 }
 
 module_init(dummy_init_module);
 module_exit(dummy_cleanup_module);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS_RTNL_LINK("dummy");
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 763810c7f33a..6b6401e9304e 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -159,7 +159,7 @@
 
 #define DRV_NAME		"e100"
 #define DRV_EXT			"-NAPI"
-#define DRV_VERSION		"3.5.17-k4"DRV_EXT
+#define DRV_VERSION		"3.5.23-k4"DRV_EXT
 #define DRV_DESCRIPTION		"Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT		"Copyright(c) 1999-2006 Intel Corporation"
 #define PFX			DRV_NAME ": "
@@ -583,7 +583,6 @@ struct nic {
 	u32 rx_tco_frames;
 	u32 rx_over_length_errors;
 
-	u8 rev_id;
 	u16 leds;
 	u16 eeprom_wc;
 	u16 eeprom[256];
@@ -937,9 +936,8 @@ static void e100_get_defaults(struct nic *nic)
 	struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
 	struct param_range cbs  = { .min = 64, .max = 256, .count = 128 };
 
-	pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
 	/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
-	nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id;
+	nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
 	if(nic->mac == mac_unknown)
 		nic->mac = mac_82557_D100_A;
 
@@ -1024,10 +1022,16 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		config->mwi_enable = 0x1;	/* 1=enable, 0=disable */
 		config->standard_tcb = 0x0;	/* 1=standard, 0=extended */
 		config->rx_long_ok = 0x1;	/* 1=VLANs ok, 0=standard */
-		if(nic->mac >= mac_82559_D101M)
+		if (nic->mac >= mac_82559_D101M) {
 			config->tno_intr = 0x1;		/* TCO stats enable */
-		else
+			/* Enable TCO in extended config */
+			if (nic->mac >= mac_82551_10) {
+				config->byte_count = 0x20; /* extended bytes */
+				config->rx_d102_mode = 0x1; /* GMRC for TCO */
+			}
+		} else {
 			config->standard_stat_counter = 0x0;
+		}
 	}
 
 	DPRINTK(HW, DEBUG, "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
@@ -1273,7 +1277,7 @@ static void e100_setup_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb
 	if (nic->flags & ich)
 		goto noloaducode;
 
-	/* Search for ucode match against h/w rev_id */
+	/* Search for ucode match against h/w revision */
 	for (opts = ucode_opts; opts->mac; opts++) {
 		int i;
 		u32 *ucode = opts->ucode;
@@ -2232,7 +2236,7 @@ static void e100_get_regs(struct net_device *netdev,
 	u32 *buff = p;
 	int i;
 
-	regs->version = (1 << 24) | nic->rev_id;
+	regs->version = (1 << 24) | nic->pdev->revision;
 	buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
 		ioread8(&nic->csr->scb.cmd_lo) << 16 |
 		ioread16(&nic->csr->scb.status);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index cf8af928a69c..f48b659e0c2b 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1266,8 +1266,7 @@ e1000_sw_init(struct e1000_adapter *adapter)
 	hw->device_id = pdev->device;
 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
 	hw->subsystem_id = pdev->subsystem_device;
-
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+	hw->revision_id = pdev->revision;
 
 	pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
 
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 9800341956a2..9afa47edfc58 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -1801,7 +1801,7 @@ speedo_rx(struct net_device *dev)
 
 #if 1 || USE_IP_CSUM
 				/* Packet is in one chunk -- we can copy + cksum. */
-				eth_copy_and_sum(skb, sp->rx_skbuff[entry]->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb, sp->rx_skbuff[entry]->data, pkt_len);
 				skb_put(skb, pkt_len);
 #else
 				skb_copy_from_linear_data(sp->rx_skbuff[entry],
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index c0f81b5a30fb..f03f070451de 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -39,7 +39,13 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0064"
+#define DRV_VERSION	"EHEA_0067"
+
+/* EHEA capability flags */
+#define DLPAR_PORT_ADD_REM 1
+#define DLPAR_MEM_ADD 2
+#define DLPAR_MEM_REM 4
+#define EHEA_CAPABILITIES (DLPAR_PORT_ADD_REM)
 
 #define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \
 	| NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
@@ -136,10 +142,10 @@ void ehea_dump(void *adr, int len, char *msg);
 	(0xffffffffffffffffULL >> ((64 - (mask)) & 0xffff))
 
 #define EHEA_BMASK_SET(mask, value) \
-        ((EHEA_BMASK_MASK(mask) & ((u64)(value))) << EHEA_BMASK_SHIFTPOS(mask))
+	((EHEA_BMASK_MASK(mask) & ((u64)(value))) << EHEA_BMASK_SHIFTPOS(mask))
 
 #define EHEA_BMASK_GET(mask, value) \
-        (EHEA_BMASK_MASK(mask) & (((u64)(value)) >> EHEA_BMASK_SHIFTPOS(mask)))
+	(EHEA_BMASK_MASK(mask) & (((u64)(value)) >> EHEA_BMASK_SHIFTPOS(mask)))
 
 /*
  * Generic ehea page
@@ -190,7 +196,7 @@ struct ehea_av;
  * Queue attributes passed to ehea_create_qp()
  */
 struct ehea_qp_init_attr {
-        /* input parameter */
+	/* input parameter */
 	u32 qp_token;           /* queue token */
 	u8 low_lat_rq1;
 	u8 signalingtype;       /* cqe generation flag */
@@ -212,7 +218,7 @@ struct ehea_qp_init_attr {
 	u64 recv_cq_handle;
 	u64 aff_eq_handle;
 
-        /* output parameter */
+	/* output parameter */
 	u32 qp_nr;
 	u16 act_nr_send_wqes;
 	u16 act_nr_rwqes_rq1;
@@ -279,12 +285,12 @@ struct ehea_qp {
  * Completion Queue attributes
  */
 struct ehea_cq_attr {
-        /* input parameter */
+	/* input parameter */
 	u32 max_nr_of_cqes;
 	u32 cq_token;
 	u64 eq_handle;
 
-        /* output parameter */
+	/* output parameter */
 	u32 act_nr_of_cqes;
 	u32 nr_pages;
 };
diff --git a/drivers/net/ehea/ehea_hw.h b/drivers/net/ehea/ehea_hw.h
index 1246757f2c22..1af7ca499ec5 100644
--- a/drivers/net/ehea/ehea_hw.h
+++ b/drivers/net/ehea/ehea_hw.h
@@ -211,34 +211,34 @@ static inline void epa_store_acc(struct h_epa epa, u32 offset, u64 value)
 }
 
 #define epa_store_eq(epa, offset, value)\
-        epa_store(epa, EQTEMM_OFFSET(offset), value)
+	epa_store(epa, EQTEMM_OFFSET(offset), value)
 #define epa_load_eq(epa, offset)\
-        epa_load(epa, EQTEMM_OFFSET(offset))
+	epa_load(epa, EQTEMM_OFFSET(offset))
 
 #define epa_store_cq(epa, offset, value)\
-        epa_store(epa, CQTEMM_OFFSET(offset), value)
+	epa_store(epa, CQTEMM_OFFSET(offset), value)
 #define epa_load_cq(epa, offset)\
-        epa_load(epa, CQTEMM_OFFSET(offset))
+	epa_load(epa, CQTEMM_OFFSET(offset))
 
 #define epa_store_qp(epa, offset, value)\
-        epa_store(epa, QPTEMM_OFFSET(offset), value)
+	epa_store(epa, QPTEMM_OFFSET(offset), value)
 #define epa_load_qp(epa, offset)\
-        epa_load(epa, QPTEMM_OFFSET(offset))
+	epa_load(epa, QPTEMM_OFFSET(offset))
 
 #define epa_store_qped(epa, offset, value)\
-        epa_store(epa, QPEDMM_OFFSET(offset), value)
+	epa_store(epa, QPEDMM_OFFSET(offset), value)
 #define epa_load_qped(epa, offset)\
-        epa_load(epa, QPEDMM_OFFSET(offset))
+	epa_load(epa, QPEDMM_OFFSET(offset))
 
 #define epa_store_mrmw(epa, offset, value)\
-        epa_store(epa, MRMWMM_OFFSET(offset), value)
+	epa_store(epa, MRMWMM_OFFSET(offset), value)
 #define epa_load_mrmw(epa, offset)\
-        epa_load(epa, MRMWMM_OFFSET(offset))
+	epa_load(epa, MRMWMM_OFFSET(offset))
 
 #define epa_store_base(epa, offset, value)\
-        epa_store(epa, HCAGR_OFFSET(offset), value)
+	epa_store(epa, HCAGR_OFFSET(offset), value)
 #define epa_load_base(epa, offset)\
-        epa_load(epa, HCAGR_OFFSET(offset))
+	epa_load(epa, HCAGR_OFFSET(offset))
 
 static inline void ehea_update_sqa(struct ehea_qp *qp, u16 nr_wqes)
 {
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 9e13433a268a..383144db4d18 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -81,7 +81,7 @@ MODULE_PARM_DESC(use_mcs, " 0:NAPI, 1:Multiple receive queues, Default = 1 ");
 static int port_name_cnt = 0;
 
 static int __devinit ehea_probe_adapter(struct ibmebus_dev *dev,
-                                        const struct of_device_id *id);
+					const struct of_device_id *id);
 
 static int __devexit ehea_remove(struct ibmebus_dev *dev);
 
@@ -236,7 +236,7 @@ static int ehea_refill_rq_def(struct ehea_port_res *pr,
 
 		rwqe = ehea_get_next_rwqe(qp, rq_nr);
 		rwqe->wr_id = EHEA_BMASK_SET(EHEA_WR_ID_TYPE, wqe_type)
-		            | EHEA_BMASK_SET(EHEA_WR_ID_INDEX, index);
+			    | EHEA_BMASK_SET(EHEA_WR_ID_INDEX, index);
 		rwqe->sg_list[0].l_key = pr->recv_mr.lkey;
 		rwqe->sg_list[0].vaddr = (u64)skb->data;
 		rwqe->sg_list[0].len = packet_size;
@@ -427,7 +427,7 @@ static struct ehea_cqe *ehea_proc_rwqes(struct net_device *dev,
 						break;
 				}
 				skb_copy_to_linear_data(skb, ((char*)cqe) + 64,
-					       cqe->num_bytes_transfered - 4);
+						 cqe->num_bytes_transfered - 4);
 				ehea_fill_skb(port->netdev, skb, cqe);
 			} else if (rq == 2) {  /* RQ2 */
 				skb = get_skb_by_index(skb_arr_rq2,
@@ -618,7 +618,7 @@ static struct ehea_port *ehea_get_port(struct ehea_adapter *adapter,
 
 	for (i = 0; i < EHEA_MAX_PORTS; i++)
 		if (adapter->port[i])
-	                if (adapter->port[i]->logical_port_id == logical_port)
+			if (adapter->port[i]->logical_port_id == logical_port)
 				return adapter->port[i];
 	return NULL;
 }
@@ -1695,6 +1695,7 @@ static void ehea_xmit2(struct sk_buff *skb, struct net_device *dev,
 {
 	if (skb->protocol == htons(ETH_P_IP)) {
 		const struct iphdr *iph = ip_hdr(skb);
+
 		/* IPv4 */
 		swqe->tx_control |= EHEA_SWQE_CRC
 				 | EHEA_SWQE_IP_CHECKSUM
@@ -1705,13 +1706,12 @@ static void ehea_xmit2(struct sk_buff *skb, struct net_device *dev,
 		write_ip_start_end(swqe, skb);
 
 		if (iph->protocol == IPPROTO_UDP) {
-			if ((iph->frag_off & IP_MF) ||
-			    (iph->frag_off & IP_OFFSET))
+			if ((iph->frag_off & IP_MF)
+			    || (iph->frag_off & IP_OFFSET))
 				/* IP fragment, so don't change cs */
 				swqe->tx_control &= ~EHEA_SWQE_TCP_CHECKSUM;
 			else
 				write_udp_offset_end(swqe, skb);
-
 		} else if (iph->protocol == IPPROTO_TCP) {
 			write_tcp_offset_end(swqe, skb);
 		}
@@ -1739,6 +1739,7 @@ static void ehea_xmit3(struct sk_buff *skb, struct net_device *dev,
 
 	if (skb->protocol == htons(ETH_P_IP)) {
 		const struct iphdr *iph = ip_hdr(skb);
+
 		/* IPv4 */
 		write_ip_start_end(swqe, skb);
 
@@ -1751,8 +1752,8 @@ static void ehea_xmit3(struct sk_buff *skb, struct net_device *dev,
 			write_tcp_offset_end(swqe, skb);
 
 		} else if (iph->protocol == IPPROTO_UDP) {
-			if ((iph->frag_off & IP_MF) ||
-			    (iph->frag_off & IP_OFFSET))
+			if ((iph->frag_off & IP_MF)
+			    || (iph->frag_off & IP_OFFSET))
 				/* IP fragment, so don't change cs */
 				swqe->tx_control |= EHEA_SWQE_CRC
 						 | EHEA_SWQE_IMM_DATA_PRESENT;
@@ -2407,7 +2408,7 @@ static void __devinit logical_port_release(struct device *dev)
 }
 
 static int ehea_driver_sysfs_add(struct device *dev,
-                                 struct device_driver *driver)
+				 struct device_driver *driver)
 {
 	int ret;
 
@@ -2424,7 +2425,7 @@ static int ehea_driver_sysfs_add(struct device *dev,
 }
 
 static void ehea_driver_sysfs_remove(struct device *dev,
-                                     struct device_driver *driver)
+				     struct device_driver *driver)
 {
 	struct device_driver *drv = driver;
 
@@ -2453,7 +2454,7 @@ static struct device *ehea_register_port(struct ehea_port *port,
 	}
 
 	ret = device_create_file(&port->ofdev.dev, &dev_attr_log_port_id);
-        if (ret) {
+	if (ret) {
 		ehea_error("failed to register attributes, ret=%d", ret);
 		goto out_unreg_of_dev;
 	}
@@ -2601,6 +2602,7 @@ static int ehea_setup_ports(struct ehea_adapter *adapter)
 {
 	struct device_node *lhea_dn;
 	struct device_node *eth_dn = NULL;
+
 	const u32 *dn_log_port_id;
 	int i = 0;
 
@@ -2608,7 +2610,7 @@ static int ehea_setup_ports(struct ehea_adapter *adapter)
 	while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) {
 
 		dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no",
-						    NULL);
+						 NULL);
 		if (!dn_log_port_id) {
 			ehea_error("bad device node: eth_dn name=%s",
 				   eth_dn->full_name);
@@ -2648,7 +2650,7 @@ static struct device_node *ehea_get_eth_dn(struct ehea_adapter *adapter,
 	while ((eth_dn = of_get_next_child(lhea_dn, eth_dn))) {
 
 		dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no",
-						    NULL);
+						 NULL);
 		if (dn_log_port_id)
 			if (*dn_log_port_id == logical_port_id)
 				return eth_dn;
@@ -2789,7 +2791,7 @@ static int __devinit ehea_probe_adapter(struct ibmebus_dev *dev,
 	adapter->ebus_dev = dev;
 
 	adapter_handle = of_get_property(dev->ofdev.node, "ibm,hea-handle",
-					    NULL);
+					 NULL);
 	if (adapter_handle)
 		adapter->handle = *adapter_handle;
 
@@ -2921,6 +2923,15 @@ static int check_module_parm(void)
 	return ret;
 }
 
+static ssize_t ehea_show_capabilities(struct device_driver *drv,
+				      char *buf)
+{
+	return sprintf(buf, "%d", EHEA_CAPABILITIES);
+}
+
+static DRIVER_ATTR(capabilities, S_IRUSR | S_IRGRP | S_IROTH,
+		   ehea_show_capabilities, NULL);
+
 int __init ehea_module_init(void)
 {
 	int ret;
@@ -2932,8 +2943,19 @@ int __init ehea_module_init(void)
 	if (ret)
 		goto out;
 	ret = ibmebus_register_driver(&ehea_driver);
-	if (ret)
+	if (ret) {
 		ehea_error("failed registering eHEA device driver on ebus");
+		goto out;
+	}
+
+	ret = driver_create_file(&ehea_driver.driver,
+				 &driver_attr_capabilities);
+	if (ret) {
+		ehea_error("failed to register capabilities attribute, ret=%d",
+			   ret);
+		ibmebus_unregister_driver(&ehea_driver);
+		goto out;
+	}
 
 out:
 	return ret;
@@ -2941,6 +2963,7 @@ out:
 
 static void __exit ehea_module_exit(void)
 {
+	driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
 	ibmebus_unregister_driver(&ehea_driver);
 }
 
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index f24a8862977d..29eaa46948b0 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -211,7 +211,7 @@ u64 ehea_destroy_cq_res(struct ehea_cq *cq, u64 force)
 	u64 hret;
 	u64 adapter_handle = cq->adapter->handle;
 
-        /* deregister all previous registered pages */
+	/* deregister all previous registered pages */
 	hret = ehea_h_free_resource(adapter_handle, cq->fw_handle, force);
 	if (hret != H_SUCCESS)
 		return hret;
@@ -362,7 +362,7 @@ int ehea_destroy_eq(struct ehea_eq *eq)
 	if (hret != H_SUCCESS) {
 		ehea_error("destroy EQ failed");
 		return -EIO;
-        }
+	}
 
 	return 0;
 }
@@ -507,44 +507,44 @@ out_freemem:
 
 u64 ehea_destroy_qp_res(struct ehea_qp *qp, u64 force)
 {
-        u64 hret;
-        struct ehea_qp_init_attr *qp_attr = &qp->init_attr;
+	u64 hret;
+	struct ehea_qp_init_attr *qp_attr = &qp->init_attr;
 
 
-        ehea_h_disable_and_get_hea(qp->adapter->handle, qp->fw_handle);
-        hret = ehea_h_free_resource(qp->adapter->handle, qp->fw_handle, force);
-        if (hret != H_SUCCESS)
-                return hret;
+	ehea_h_disable_and_get_hea(qp->adapter->handle, qp->fw_handle);
+	hret = ehea_h_free_resource(qp->adapter->handle, qp->fw_handle, force);
+	if (hret != H_SUCCESS)
+		return hret;
 
-        hw_queue_dtor(&qp->hw_squeue);
-        hw_queue_dtor(&qp->hw_rqueue1);
+	hw_queue_dtor(&qp->hw_squeue);
+	hw_queue_dtor(&qp->hw_rqueue1);
 
-        if (qp_attr->rq_count > 1)
-                hw_queue_dtor(&qp->hw_rqueue2);
-        if (qp_attr->rq_count > 2)
-                hw_queue_dtor(&qp->hw_rqueue3);
-        kfree(qp);
+	if (qp_attr->rq_count > 1)
+		hw_queue_dtor(&qp->hw_rqueue2);
+	if (qp_attr->rq_count > 2)
+		hw_queue_dtor(&qp->hw_rqueue3);
+	kfree(qp);
 
-        return hret;
+	return hret;
 }
 
 int ehea_destroy_qp(struct ehea_qp *qp)
 {
-        u64 hret;
-        if (!qp)
-                return 0;
+	u64 hret;
+	if (!qp)
+		return 0;
 
-        if ((hret = ehea_destroy_qp_res(qp, NORMAL_FREE)) == H_R_STATE) {
-                ehea_error_data(qp->adapter, qp->fw_handle);
-                hret = ehea_destroy_qp_res(qp, FORCE_FREE);
-        }
+	if ((hret = ehea_destroy_qp_res(qp, NORMAL_FREE)) == H_R_STATE) {
+		ehea_error_data(qp->adapter, qp->fw_handle);
+		hret = ehea_destroy_qp_res(qp, FORCE_FREE);
+	}
 
-        if (hret != H_SUCCESS) {
-                ehea_error("destroy QP failed");
-                return -EIO;
-        }
+	if (hret != H_SUCCESS) {
+		ehea_error("destroy QP failed");
+		return -EIO;
+	}
 
-        return 0;
+	return 0;
 }
 
 int ehea_reg_kernel_mr(struct ehea_adapter *adapter, struct ehea_mr *mr)
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 5e517946f46a..119778401e48 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -1201,7 +1201,7 @@ static int epic_rx(struct net_device *dev, int budget)
 							    ep->rx_ring[entry].bufaddr,
 							    ep->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
-				eth_copy_and_sum(skb, ep->rx_skbuff[entry]->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb, ep->rx_skbuff[entry]->data, pkt_len);
 				skb_put(skb, pkt_len);
 				pci_dma_sync_single_for_device(ep->pci_dev,
 							       ep->rx_ring[entry].bufaddr,
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index abe9b089c610..ff9f177d7157 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -1727,8 +1727,8 @@ static int netdev_rx(struct net_device *dev)
 				/* Call copy + cksum if available. */
 
 #if ! defined(__alpha__)
-				eth_copy_and_sum(skb,
-					np->cur_rx->skbuff->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb,
+					np->cur_rx->skbuff->data, pkt_len);
 				skb_put(skb, pkt_len);
 #else
 				memcpy(skb_put(skb, pkt_len),
diff --git a/drivers/net/fec.c b/drivers/net/fec.c
index 255b09124e11..03023dd17829 100644
--- a/drivers/net/fec.c
+++ b/drivers/net/fec.c
@@ -648,7 +648,7 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
 		fep->stats.rx_dropped++;
 	} else {
 		skb_put(skb,pkt_len-4);	/* Make room */
-		eth_copy_and_sum(skb, data, pkt_len-4, 0);
+		skb_copy_to_linear_data(skb, data, pkt_len-4);
 		skb->protocol=eth_type_trans(skb,dev);
 		netif_rx(skb);
 	}
diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig
index a84c232395e3..afb34ded26ee 100644
--- a/drivers/net/fec_8xx/Kconfig
+++ b/drivers/net/fec_8xx/Kconfig
@@ -1,6 +1,6 @@
 config FEC_8XX
 	tristate "Motorola 8xx FEC driver"
-	depends on NET_ETHERNET && 8xx
+	depends on 8XX
 	select MII
 
 config FEC_8XX_GENERIC_PHY
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 42ba1c012ee2..67046e8c21eb 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5084,15 +5084,13 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	np->wolenabled = 0;
 
 	if (id->driver_data & DEV_HAS_POWER_CNTRL) {
-		u8 revision_id;
-		pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id);
 
 		/* take phy and nic out of low power mode */
 		powerstate = readl(base + NvRegPowerState2);
 		powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
 		if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
 		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
-		    revision_id >= 0xA3)
+		    pci_dev->revision >= 0xA3)
 			powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
 		writel(powerstate, base + NvRegPowerState2);
 	}
diff --git a/drivers/net/fs_enet/Kconfig b/drivers/net/fs_enet/Kconfig
index 6aaee67dd4b7..e27ee210b605 100644
--- a/drivers/net/fs_enet/Kconfig
+++ b/drivers/net/fs_enet/Kconfig
@@ -1,6 +1,6 @@
 config FS_ENET
        tristate "Freescale Ethernet Driver"
-       depends on NET_ETHERNET && (CPM1 || CPM2)
+       depends on CPM1 || CPM2
        select MII
 
 config FS_ENET_HAS_SCC
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1b854bf07b09..d7a1a58de766 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -130,6 +130,9 @@ static int gfar_remove(struct platform_device *pdev);
 static void free_skb_resources(struct gfar_private *priv);
 static void gfar_set_multi(struct net_device *dev);
 static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
+static void gfar_configure_serdes(struct net_device *dev);
+extern int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, int regnum, u16 value);
+extern int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum);
 #ifdef CONFIG_GFAR_NAPI
 static int gfar_poll(struct net_device *dev, int *budget);
 #endif
@@ -451,6 +454,9 @@ static int init_phy(struct net_device *dev)
 
 	phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
 
+	if (interface == PHY_INTERFACE_MODE_SGMII)
+		gfar_configure_serdes(dev);
+
 	if (IS_ERR(phydev)) {
 		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
 		return PTR_ERR(phydev);
@@ -465,6 +471,27 @@ static int init_phy(struct net_device *dev)
 	return 0;
 }
 
+static void gfar_configure_serdes(struct net_device *dev)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_mii __iomem *regs =
+			(void __iomem *)&priv->regs->gfar_mii_regs;
+
+	/* Initialise TBI i/f to communicate with serdes (lynx phy) */
+
+	/* Single clk mode, mii mode off(for aerdes communication) */
+	gfar_local_mdio_write(regs, TBIPA_VALUE, MII_TBICON, TBICON_CLK_SELECT);
+
+	/* Supported pause and full-duplex, no half-duplex */
+	gfar_local_mdio_write(regs, TBIPA_VALUE, MII_ADVERTISE,
+			ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
+			ADVERTISE_1000XPSE_ASYM);
+
+	/* ANEG enable, restart ANEG, full duplex mode, speed[1] set */
+	gfar_local_mdio_write(regs, TBIPA_VALUE, MII_BMCR, BMCR_ANENABLE |
+			BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
+}
+
 static void init_registers(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 39e9e321fcbc..d8e779c102fa 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -136,6 +136,12 @@ extern const char gfar_driver_version[];
 #define MIIMCFG_RESET           0x80000000
 #define MIIMIND_BUSY            0x00000001
 
+/* TBI register addresses */
+#define MII_TBICON		0x11
+
+/* TBICON register bit fields */
+#define TBICON_CLK_SELECT	0x0020
+
 /* MAC register bits */
 #define MACCFG1_SOFT_RESET	0x80000000
 #define MACCFG1_RESET_RX_MC	0x00080000
diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
index bcc6b82f4a33..5dd34a1a7b89 100644
--- a/drivers/net/gianfar_mii.c
+++ b/drivers/net/gianfar_mii.c
@@ -43,13 +43,18 @@
 #include "gianfar.h"
 #include "gianfar_mii.h"
 
-/* Write value to the PHY at mii_id at register regnum,
- * on the bus, waiting until the write is done before returning.
- * All PHY configuration is done through the TSEC1 MIIM regs */
-int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus attached to the local interface, which may be different from the
+ * generic mdio bus (tied to a single interface), waiting until the write is
+ * done before returning. This is helpful in programming interfaces like
+ * the TBI which control interfaces like onchip SERDES and are always tied to
+ * the local mdio pins, which may not be the same as system mdio bus, used for
+ * controlling the external PHYs, for example.
+ */
+int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id,
+			  int regnum, u16 value)
 {
-	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
-
 	/* Set the PHY address and the register address we want to write */
 	gfar_write(&regs->miimadd, (mii_id << 8) | regnum);
 
@@ -63,12 +68,19 @@ int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
 	return 0;
 }
 
-/* Read the bus for PHY at addr mii_id, register regnum, and
- * return the value.  Clears miimcom first.  All PHY
- * configuration has to be done through the TSEC1 MIIM regs */
-int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value.  Clears miimcom first.  All PHY operation
+ * done on the bus attached to the local interface,
+ * which may be different from the generic mdio bus
+ * This is helpful in programming interfaces like
+ * the TBI which, inturn, control interfaces like onchip SERDES
+ * and are always tied to the local mdio pins, which may not be the
+ * same as system mdio bus, used for controlling the external PHYs, for eg.
+ */
+int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum)
+
 {
-	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
 	u16 value;
 
 	/* Set the PHY address and the register address we want to read */
@@ -88,6 +100,27 @@ int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 	return value;
 }
 
+/* Write value to the PHY at mii_id at register regnum,
+ * on the bus, waiting until the write is done before returning.
+ * All PHY configuration is done through the TSEC1 MIIM regs */
+int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
+
+	/* Write to the local MII regs */
+	return(gfar_local_mdio_write(regs, mii_id, regnum, value));
+}
+
+/* Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value.  Clears miimcom first.  All PHY
+ * configuration has to be done through the TSEC1 MIIM regs */
+int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
+
+	/* Read the local MII regs */
+	return(gfar_local_mdio_read(regs, mii_id, regnum));
+}
 
 /* Reset the MIIM registers, and wait for the bus to free */
 int gfar_mdio_reset(struct mii_bus *bus)
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 2521b111b3a5..15254dc7876a 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1575,8 +1575,8 @@ static int hamachi_rx(struct net_device *dev)
 							    PCI_DMA_FROMDEVICE);
 				/* Call copy + cksum if available. */
 #if 1 || USE_IP_COPYSUM
-				eth_copy_and_sum(skb,
-					hmp->rx_skbuff[entry]->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb,
+					hmp->rx_skbuff[entry]->data, pkt_len);
 				skb_put(skb, pkt_len);
 #else
 				memcpy(skb_put(skb, pkt_len), hmp->rx_ring_dma
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 6ec3d500f334..d96eb7229548 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1337,7 +1337,7 @@ const char * buf, size_t count)
 
 #define ATTR(_name, _mode)      \
         struct attribute veth_##_name##_attr = {               \
-        .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE \
+        .name = __stringify(_name), .mode = _mode, \
         };
 
 static ATTR(active, 0644);
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 07b4c0d7a75c..f5c3598e59af 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -136,13 +136,14 @@ resched:
 
 }
 
-static void __init ifb_setup(struct net_device *dev)
+static void ifb_setup(struct net_device *dev)
 {
 	/* Initialize the device structure. */
 	dev->get_stats = ifb_get_stats;
 	dev->hard_start_xmit = ifb_xmit;
 	dev->open = &ifb_open;
 	dev->stop = &ifb_close;
+	dev->destructor = free_netdev;
 
 	/* Fill in device structure with ethernet-generic values. */
 	ether_setup(dev);
@@ -197,12 +198,6 @@ static struct net_device_stats *ifb_get_stats(struct net_device *dev)
 	return stats;
 }
 
-static struct net_device **ifbs;
-
-/* Number of ifb devices to be set up by this module. */
-module_param(numifbs, int, 0);
-MODULE_PARM_DESC(numifbs, "Number of ifb devices");
-
 static int ifb_close(struct net_device *dev)
 {
 	struct ifb_private *dp = netdev_priv(dev);
@@ -226,6 +221,28 @@ static int ifb_open(struct net_device *dev)
 	return 0;
 }
 
+static int ifb_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+	if (tb[IFLA_ADDRESS]) {
+		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+			return -EINVAL;
+		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+			return -EADDRNOTAVAIL;
+	}
+	return 0;
+}
+
+static struct rtnl_link_ops ifb_link_ops __read_mostly = {
+	.kind		= "ifb",
+	.priv_size	= sizeof(struct ifb_private),
+	.setup		= ifb_setup,
+	.validate	= ifb_validate,
+};
+
+/* Number of ifb devices to be set up by this module. */
+module_param(numifbs, int, 0);
+MODULE_PARM_DESC(numifbs, "Number of ifb devices");
+
 static int __init ifb_init_one(int index)
 {
 	struct net_device *dev_ifb;
@@ -237,49 +254,44 @@ static int __init ifb_init_one(int index)
 	if (!dev_ifb)
 		return -ENOMEM;
 
-	if ((err = register_netdev(dev_ifb))) {
-		free_netdev(dev_ifb);
-		dev_ifb = NULL;
-	} else {
-		ifbs[index] = dev_ifb;
-	}
+	err = dev_alloc_name(dev_ifb, dev_ifb->name);
+	if (err < 0)
+		goto err;
 
-	return err;
-}
+	dev_ifb->rtnl_link_ops = &ifb_link_ops;
+	err = register_netdevice(dev_ifb);
+	if (err < 0)
+		goto err;
+	return 0;
 
-static void ifb_free_one(int index)
-{
-	unregister_netdev(ifbs[index]);
-	free_netdev(ifbs[index]);
+err:
+	free_netdev(dev_ifb);
+	return err;
 }
 
 static int __init ifb_init_module(void)
 {
-	int i, err = 0;
-	ifbs = kmalloc(numifbs * sizeof(void *), GFP_KERNEL);
-	if (!ifbs)
-		return -ENOMEM;
+	int i, err;
+
+	rtnl_lock();
+	err = __rtnl_link_register(&ifb_link_ops);
+
 	for (i = 0; i < numifbs && !err; i++)
 		err = ifb_init_one(i);
-	if (err) {
-		i--;
-		while (--i >= 0)
-			ifb_free_one(i);
-	}
+	if (err)
+		__rtnl_link_unregister(&ifb_link_ops);
+	rtnl_unlock();
 
 	return err;
 }
 
 static void __exit ifb_cleanup_module(void)
 {
-	int i;
-
-	for (i = 0; i < numifbs; i++)
-		ifb_free_one(i);
-	kfree(ifbs);
+	rtnl_link_unregister(&ifb_link_ops);
 }
 
 module_init(ifb_init_module);
 module_exit(ifb_cleanup_module);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jamal Hadi Salim");
+MODULE_ALIAS_RTNL_LINK("ifb");
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index f749e07c6425..3ca1e8ece548 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -352,13 +352,12 @@ static u64 nic_find(struct ioc3 *ioc3, int *last)
 
 static int nic_init(struct ioc3 *ioc3)
 {
-	const char *type;
+	const char *unknown = "unknown";
+	const char *type = unknown;
 	u8 crc;
 	u8 serial[6];
 	int save = 0, i;
 
-	type = "unknown";
-
 	while (1) {
 		u64 reg;
 		reg = nic_find(ioc3, &save);
@@ -392,7 +391,7 @@ static int nic_init(struct ioc3 *ioc3)
 	}
 
 	printk("Found %s NIC", type);
-	if (type != "unknown") {
+	if (type != unknown) {
 		printk (" registration number %02x:%02x:%02x:%02x:%02x:%02x,"
 			" CRC %02x", serial[0], serial[1], serial[2],
 			serial[3], serial[4], serial[5], crc);
@@ -1103,20 +1102,28 @@ static int ioc3_close(struct net_device *dev)
  * MiniDINs; all other subdevices are left swinging in the wind, leave
  * them disabled.
  */
-static inline int ioc3_is_menet(struct pci_dev *pdev)
+
+static int ioc3_adjacent_is_ioc3(struct pci_dev *pdev, int slot)
+{
+	struct pci_dev *dev = pci_get_slot(pdev->bus, PCI_DEVFN(slot, 0));
+	int ret = 0;
+
+	if (dev) {
+		if (dev->vendor == PCI_VENDOR_ID_SGI &&
+			dev->device == PCI_DEVICE_ID_SGI_IOC3)
+			ret = 1;
+		pci_dev_put(dev);
+	}
+
+	return ret;
+}
+
+static int ioc3_is_menet(struct pci_dev *pdev)
 {
-	struct pci_dev *dev;
-
-	return pdev->bus->parent == NULL
-	       && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(0, 0)))
-	       && dev->vendor == PCI_VENDOR_ID_SGI
-	       && dev->device == PCI_DEVICE_ID_SGI_IOC3
-	       && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(1, 0)))
-	       && dev->vendor == PCI_VENDOR_ID_SGI
-	       && dev->device == PCI_DEVICE_ID_SGI_IOC3
-	       && (dev = pci_find_slot(pdev->bus->number, PCI_DEVFN(2, 0)))
-	       && dev->vendor == PCI_VENDOR_ID_SGI
-	       && dev->device == PCI_DEVICE_ID_SGI_IOC3;
+	return pdev->bus->parent == NULL &&
+	       ioc3_adjacent_is_ioc3(pdev, 0) &&
+	       ioc3_adjacent_is_ioc3(pdev, 1) &&
+	       ioc3_adjacent_is_ioc3(pdev, 2);
 }
 
 #ifdef CONFIG_SERIAL_8250
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 217429122e79..bdd5c979bead 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -4,7 +4,7 @@
 * Version:       0.1.1
 * Description:   Irda KingSun/DonShine USB Dongle
 * Status:        Experimental
-* Author:        Alex Villac�s Lasso <a_villacis@palosanto.com>
+* Author:        Alex Villacís Lasso <a_villacis@palosanto.com>
 *
 *  	Based on stir4200 and mcs7780 drivers, with (strange?) differences
 *
@@ -652,6 +652,6 @@ static void __exit kingsun_cleanup(void)
 }
 module_exit(kingsun_cleanup);
 
-MODULE_AUTHOR("Alex Villac�s Lasso <a_villacis@palosanto.com>");
+MODULE_AUTHOR("Alex Villacís Lasso <a_villacis@palosanto.com>");
 MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun/DonShine");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index bf78ef1120ad..0538ca9ce058 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -44,6 +44,7 @@ MODULE_LICENSE("GPL");
 #include <linux/time.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/mutex.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
 
@@ -1660,8 +1661,8 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	idev = ndev->priv;
 
 	spin_lock_init(&idev->lock);
-	init_MUTEX(&idev->sem);
-	down(&idev->sem);
+	mutex_init(&idev->mtx);
+	mutex_lock(&idev->mtx);
 	idev->pdev = pdev;
 
 	if (vlsi_irda_init(ndev) < 0)
@@ -1689,12 +1690,12 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name);
 
 	pci_set_drvdata(pdev, ndev);
-	up(&idev->sem);
+	mutex_unlock(&idev->mtx);
 
 	return 0;
 
 out_freedev:
-	up(&idev->sem);
+	mutex_unlock(&idev->mtx);
 	free_netdev(ndev);
 out_disable:
 	pci_disable_device(pdev);
@@ -1716,12 +1717,12 @@ static void __devexit vlsi_irda_remove(struct pci_dev *pdev)
 	unregister_netdev(ndev);
 
 	idev = ndev->priv;
-	down(&idev->sem);
+	mutex_lock(&idev->mtx);
 	if (idev->proc_entry) {
 		remove_proc_entry(ndev->name, vlsi_proc_root);
 		idev->proc_entry = NULL;
 	}
-	up(&idev->sem);
+	mutex_unlock(&idev->mtx);
 
 	free_netdev(ndev);
 
@@ -1751,7 +1752,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 		return 0;
 	}
 	idev = ndev->priv;	
-	down(&idev->sem);
+	mutex_lock(&idev->mtx);
 	if (pdev->current_state != 0) {			/* already suspended */
 		if (state.event > pdev->current_state) {	/* simply go deeper */
 			pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -1759,7 +1760,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 		}
 		else
 			IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
-		up(&idev->sem);
+		mutex_unlock(&idev->mtx);
 		return 0;
 	}
 
@@ -1775,7 +1776,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state)
 	pci_set_power_state(pdev, pci_choose_state(pdev, state));
 	pdev->current_state = state.event;
 	idev->resume_ok = 1;
-	up(&idev->sem);
+	mutex_unlock(&idev->mtx);
 	return 0;
 }
 
@@ -1790,9 +1791,9 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 		return 0;
 	}
 	idev = ndev->priv;	
-	down(&idev->sem);
+	mutex_lock(&idev->mtx);
 	if (pdev->current_state == 0) {
-		up(&idev->sem);
+		mutex_unlock(&idev->mtx);
 		IRDA_WARNING("%s - %s: already resumed\n",
 			     __FUNCTION__, pci_name(pdev));
 		return 0;
@@ -1814,7 +1815,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 		 * device and independently resume_ok should catch any garbage config.
 		 */
 		IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
-		up(&idev->sem);
+		mutex_unlock(&idev->mtx);
 		return 0;
 	}
 
@@ -1824,7 +1825,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev)
 		netif_device_attach(ndev);
 	}
 	idev->resume_ok = 0;
-	up(&idev->sem);
+	mutex_unlock(&idev->mtx);
 	return 0;
 }
 
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index 2d3b773d8e35..ca12a6096419 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -728,7 +728,7 @@ typedef struct vlsi_irda_dev {
 	struct timeval		last_rx;
 
 	spinlock_t		lock;
-	struct semaphore	sem;
+	struct mutex		mtx;
 
 	u8			resume_ok;	
 	struct proc_dir_entry	*proc_entry;
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index d5f694fc4a21..d9ce1aef148a 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -111,7 +111,7 @@ static int ixpdev_rx(struct net_device *dev, int *budget)
 		skb = dev_alloc_skb(desc->pkt_length + 2);
 		if (likely(skb != NULL)) {
 			skb_reserve(skb, 2);
-			eth_copy_and_sum(skb, buf, desc->pkt_length, 0);
+			skb_copy_to_linear_data(skb, buf, desc->pkt_length);
 			skb_put(skb, desc->pkt_length);
 			skb->protocol = eth_type_trans(skb, nds[desc->channel]);
 
diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index 0fe96c85828b..a2f37e52b928 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -1186,9 +1186,9 @@ lance_rx(struct net_device *dev)
 				}
 				skb_reserve(skb,2);	/* 16 byte align */
 				skb_put(skb,pkt_len);	/* Make room */
-				eth_copy_and_sum(skb,
+				skb_copy_to_linear_data(skb,
 					(unsigned char *)isa_bus_to_virt((lp->rx_ring[entry].base & 0x00ffffff)),
-					pkt_len,0);
+					pkt_len);
 				skb->protocol=eth_type_trans(skb,dev);
 				netif_rx(skb);
 				dev->last_rx = jiffies;
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index 741780e14b2c..efbae4b8398e 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -86,93 +86,36 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/pdc.h>
-#include <asm/cache.h>
 #include <asm/parisc-device.h>
 
 #define LASI_82596_DRIVER_VERSION "LASI 82596 driver - Revision: 1.30"
 
-/* DEBUG flags
- */
-
-#define DEB_INIT	0x0001
-#define DEB_PROBE	0x0002
-#define DEB_SERIOUS	0x0004
-#define DEB_ERRORS	0x0008
-#define DEB_MULTI	0x0010
-#define DEB_TDR		0x0020
-#define DEB_OPEN	0x0040
-#define DEB_RESET	0x0080
-#define DEB_ADDCMD	0x0100
-#define DEB_STATUS	0x0200
-#define DEB_STARTTX	0x0400
-#define DEB_RXADDR	0x0800
-#define DEB_TXADDR	0x1000
-#define DEB_RXFRAME	0x2000
-#define DEB_INTS	0x4000
-#define DEB_STRUCT	0x8000
-#define DEB_ANY		0xffff
-
-
-#define DEB(x,y)	if (i596_debug & (x)) { y; }
-
-
-#define  CHECK_WBACK(priv, addr,len) \
-	do { dma_cache_sync((priv)->dev, (void *)addr, len, DMA_TO_DEVICE); } while (0)
-
-#define  CHECK_INV(priv, addr,len) \
-	do { dma_cache_sync((priv)->dev, (void *)addr, len, DMA_FROM_DEVICE); } while(0)
-
-#define  CHECK_WBACK_INV(priv, addr,len) \
-	do { dma_cache_sync((priv)->dev, (void *)addr, len, DMA_BIDIRECTIONAL); } while (0)
-
-
 #define PA_I82596_RESET		0	/* Offsets relative to LASI-LAN-Addr.*/
 #define PA_CPU_PORT_L_ACCESS	4
 #define PA_CHANNEL_ATTENTION	8
 
+#define OPT_SWAP_PORT	0x0001	/* Need to wordswp on the MPU port */
 
-/*
- * Define various macros for Channel Attention, word swapping etc., dependent
- * on architecture.  MVME and BVME are 680x0 based, otherwise it is Intel.
- */
+#define DMA_ALLOC                        dma_alloc_noncoherent
+#define DMA_FREE                         dma_free_noncoherent
+#define DMA_WBACK(ndev, addr, len) \
+	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_TO_DEVICE); } while (0)
 
-#ifdef __BIG_ENDIAN
-#define WSWAPrfd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPrbd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPiscp(x) (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPscb(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPcmd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPtbd(x)  (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define WSWAPchar(x) (((u32)(x)<<16) | ((((u32)(x)))>>16))
-#define ISCP_BUSY	0x00010000
-#define MACH_IS_APRICOT	0
-#else
-#define WSWAPrfd(x)     ((struct i596_rfd *)(x))
-#define WSWAPrbd(x)     ((struct i596_rbd *)(x))
-#define WSWAPiscp(x)    ((struct i596_iscp *)(x))
-#define WSWAPscb(x)     ((struct i596_scb *)(x))
-#define WSWAPcmd(x)     ((struct i596_cmd *)(x))
-#define WSWAPtbd(x)     ((struct i596_tbd *)(x))
-#define WSWAPchar(x)    ((char *)(x))
-#define ISCP_BUSY	0x0001
-#define MACH_IS_APRICOT	1
-#endif
+#define DMA_INV(ndev, addr, len) \
+	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_FROM_DEVICE); } while (0)
 
-/*
- * The MPU_PORT command allows direct access to the 82596. With PORT access
- * the following commands are available (p5-18). The 32-bit port command
- * must be word-swapped with the most significant word written first.
- * This only applies to VME boards.
- */
-#define PORT_RESET		0x00	/* reset 82596 */
-#define PORT_SELFTEST		0x01	/* selftest */
-#define PORT_ALTSCP		0x02	/* alternate SCB address */
-#define PORT_ALTDUMP		0x03	/* Alternate DUMP address */
+#define DMA_WBACK_INV(ndev, addr, len) \
+	do { dma_cache_sync((ndev)->dev.parent, (void *)addr, len, DMA_BIDIRECTIONAL); } while (0)
+
+#define SYSBUS      0x0000006c;
+
+/* big endian CPU, 82596 "big" endian mode */
+#define SWAP32(x)   (((u32)(x)<<16) | ((((u32)(x)))>>16))
+#define SWAP16(x)   (x)
 
-static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
+#include "lib82596.c"
 
 MODULE_AUTHOR("Richard Hirst");
 MODULE_DESCRIPTION("i82596 driver");
@@ -180,255 +123,15 @@ MODULE_LICENSE("GPL");
 module_param(i596_debug, int, 0);
 MODULE_PARM_DESC(i596_debug, "lasi_82596 debug mask");
 
-/* Copy frames shorter than rx_copybreak, otherwise pass on up in
- * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
- */
-static int rx_copybreak = 100;
-
-#define MAX_DRIVERS	4	/* max count of drivers */
-
-#define PKT_BUF_SZ	1536
-#define MAX_MC_CNT	64
-
-#define I596_NULL ((u32)0xffffffff)
-
-#define CMD_EOL		0x8000	/* The last command of the list, stop. */
-#define CMD_SUSP	0x4000	/* Suspend after doing cmd. */
-#define CMD_INTR	0x2000	/* Interrupt after doing cmd. */
-
-#define CMD_FLEX	0x0008	/* Enable flexible memory model */
-
-enum commands {
-	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
-	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
-};
-
-#define STAT_C		0x8000	/* Set to 0 after execution */
-#define STAT_B		0x4000	/* Command being executed */
-#define STAT_OK		0x2000	/* Command executed ok */
-#define STAT_A		0x1000	/* Command aborted */
-
-#define	 CUC_START	0x0100
-#define	 CUC_RESUME	0x0200
-#define	 CUC_SUSPEND    0x0300
-#define	 CUC_ABORT	0x0400
-#define	 RX_START	0x0010
-#define	 RX_RESUME	0x0020
-#define	 RX_SUSPEND	0x0030
-#define	 RX_ABORT	0x0040
-
-#define TX_TIMEOUT	5
-
-#define OPT_SWAP_PORT	0x0001	/* Need to wordswp on the MPU port */
-
-
-struct i596_reg {
-	unsigned short porthi;
-	unsigned short portlo;
-	u32            ca;
-};
-
-#define EOF		0x8000
-#define SIZE_MASK	0x3fff
-
-struct i596_tbd {
-	unsigned short size;
-	unsigned short pad;
-	dma_addr_t     next;
-	dma_addr_t     data;
-	u32 cache_pad[5];		/* Total 32 bytes... */
-};
-
-/* The command structure has two 'next' pointers; v_next is the address of
- * the next command as seen by the CPU, b_next is the address of the next
- * command as seen by the 82596.  The b_next pointer, as used by the 82596
- * always references the status field of the next command, rather than the
- * v_next field, because the 82596 is unaware of v_next.  It may seem more
- * logical to put v_next at the end of the structure, but we cannot do that
- * because the 82596 expects other fields to be there, depending on command
- * type.
- */
-
-struct i596_cmd {
-	struct i596_cmd *v_next;	/* Address from CPUs viewpoint */
-	unsigned short status;
-	unsigned short command;
-	dma_addr_t     b_next;	/* Address from i596 viewpoint */
-};
-
-struct tx_cmd {
-	struct i596_cmd cmd;
-	dma_addr_t     tbd;
-	unsigned short size;
-	unsigned short pad;
-	struct sk_buff *skb;		/* So we can free it after tx */
-	dma_addr_t dma_addr;
-#ifdef __LP64__
-	u32 cache_pad[6];		/* Total 64 bytes... */
-#else
-	u32 cache_pad[1];		/* Total 32 bytes... */
-#endif
-};
-
-struct tdr_cmd {
-	struct i596_cmd cmd;
-	unsigned short status;
-	unsigned short pad;
-};
-
-struct mc_cmd {
-	struct i596_cmd cmd;
-	short mc_cnt;
-	char mc_addrs[MAX_MC_CNT*6];
-};
-
-struct sa_cmd {
-	struct i596_cmd cmd;
-	char eth_addr[8];
-};
-
-struct cf_cmd {
-	struct i596_cmd cmd;
-	char i596_config[16];
-};
-
-struct i596_rfd {
-	unsigned short stat;
-	unsigned short cmd;
-	dma_addr_t     b_next;	/* Address from i596 viewpoint */
-	dma_addr_t     rbd;
-	unsigned short count;
-	unsigned short size;
-	struct i596_rfd *v_next;	/* Address from CPUs viewpoint */
-	struct i596_rfd *v_prev;
-#ifndef __LP64__
-	u32 cache_pad[2];		/* Total 32 bytes... */
-#endif
-};
-
-struct i596_rbd {
-    /* hardware data */
-    unsigned short count;
-    unsigned short zero1;
-    dma_addr_t     b_next;
-    dma_addr_t     b_data;		/* Address from i596 viewpoint */
-    unsigned short size;
-    unsigned short zero2;
-    /* driver data */
-    struct sk_buff *skb;
-    struct i596_rbd *v_next;
-    dma_addr_t     b_addr;		/* This rbd addr from i596 view */
-    unsigned char *v_data;		/* Address from CPUs viewpoint */
-					/* Total 32 bytes... */
-#ifdef __LP64__
-    u32 cache_pad[4];
-#endif
-};
-
-/* These values as chosen so struct i596_private fits in one page... */
-
-#define TX_RING_SIZE 32
-#define RX_RING_SIZE 16
-
-struct i596_scb {
-	unsigned short status;
-	unsigned short command;
-	dma_addr_t    cmd;
-	dma_addr_t    rfd;
-	u32           crc_err;
-	u32           align_err;
-	u32           resource_err;
-	u32           over_err;
-	u32           rcvdt_err;
-	u32           short_err;
-	unsigned short t_on;
-	unsigned short t_off;
-};
-
-struct i596_iscp {
-	u32           stat;
-	dma_addr_t    scb;
-};
-
-struct i596_scp {
-	u32           sysbus;
-	u32            pad;
-	dma_addr_t    iscp;
-};
-
-struct i596_private {
-	volatile struct i596_scp scp		__attribute__((aligned(32)));
-	volatile struct i596_iscp iscp		__attribute__((aligned(32)));
-	volatile struct i596_scb scb		__attribute__((aligned(32)));
-	struct sa_cmd sa_cmd			__attribute__((aligned(32)));
-	struct cf_cmd cf_cmd			__attribute__((aligned(32)));
-	struct tdr_cmd tdr_cmd			__attribute__((aligned(32)));
-	struct mc_cmd mc_cmd			__attribute__((aligned(32)));
-	struct i596_rfd rfds[RX_RING_SIZE]	__attribute__((aligned(32)));
-	struct i596_rbd rbds[RX_RING_SIZE]	__attribute__((aligned(32)));
-	struct tx_cmd tx_cmds[TX_RING_SIZE]	__attribute__((aligned(32)));
-	struct i596_tbd tbds[TX_RING_SIZE]	__attribute__((aligned(32)));
-	u32    stat;
-	int last_restart;
-	struct i596_rfd *rfd_head;
-	struct i596_rbd *rbd_head;
-	struct i596_cmd *cmd_tail;
-	struct i596_cmd *cmd_head;
-	int cmd_backlog;
-	u32    last_cmd;
-	struct net_device_stats stats;
-	int next_tx_cmd;
-	int options;
-	spinlock_t lock;
-	dma_addr_t dma_addr;
-	struct device *dev;
-};
-
-static const char init_setup[] =
-{
-	0x8E,			/* length, prefetch on */
-	0xC8,			/* fifo to 8, monitor off */
-	0x80,			/* don't save bad frames */
-	0x2E,			/* No source address insertion, 8 byte preamble */
-	0x00,			/* priority and backoff defaults */
-	0x60,			/* interframe spacing */
-	0x00,			/* slot time LSB */
-	0xf2,			/* slot time and retries */
-	0x00,			/* promiscuous mode */
-	0x00,			/* collision detect */
-	0x40,			/* minimum frame length */
-	0xff,
-	0x00,
-	0x7f /*  *multi IA */ };
-
-static int i596_open(struct net_device *dev);
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t i596_interrupt(int irq, void *dev_id);
-static int i596_close(struct net_device *dev);
-static struct net_device_stats *i596_get_stats(struct net_device *dev);
-static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
-static void i596_tx_timeout (struct net_device *dev);
-static void print_eth(unsigned char *buf, char *str);
-static void set_multicast_list(struct net_device *dev);
-
-static int rx_ring_size = RX_RING_SIZE;
-static int ticks_limit = 100;
-static int max_cmd_backlog = TX_RING_SIZE-1;
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void i596_poll_controller(struct net_device *dev);
-#endif
-
-
-static inline void CA(struct net_device *dev)
+static inline void ca(struct net_device *dev)
 {
 	gsc_writel(0, dev->base_addr + PA_CHANNEL_ATTENTION);
 }
 
 
-static inline void MPU_PORT(struct net_device *dev, int c, dma_addr_t x)
+static void mpu_port(struct net_device *dev, int c, dma_addr_t x)
 {
-	struct i596_private *lp = dev->priv;
+	struct i596_private *lp = netdev_priv(dev);
 
 	u32 v = (u32) (c) | (u32) (x);
 	u16 a, b;
@@ -446,1078 +149,15 @@ static inline void MPU_PORT(struct net_device *dev, int c, dma_addr_t x)
 	gsc_writel(b, dev->base_addr + PA_CPU_PORT_L_ACCESS);
 }
 
-
-static inline int wait_istat(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
-{
-	CHECK_INV(lp, &(lp->iscp), sizeof(struct i596_iscp));
-	while (--delcnt && lp->iscp.stat) {
-		udelay(10);
-		CHECK_INV(lp, &(lp->iscp), sizeof(struct i596_iscp));
-	}
-	if (!delcnt) {
-		printk("%s: %s, iscp.stat %04x, didn't clear\n",
-		     dev->name, str, lp->iscp.stat);
-		return -1;
-	}
-	else
-		return 0;
-}
-
-
-static inline int wait_cmd(struct net_device *dev, struct i596_private *lp, int delcnt, char *str)
-{
-	CHECK_INV(lp, &(lp->scb), sizeof(struct i596_scb));
-	while (--delcnt && lp->scb.command) {
-		udelay(10);
-		CHECK_INV(lp, &(lp->scb), sizeof(struct i596_scb));
-	}
-	if (!delcnt) {
-		printk("%s: %s, status %4.4x, cmd %4.4x.\n",
-		     dev->name, str, lp->scb.status, lp->scb.command);
-		return -1;
-	}
-	else
-		return 0;
-}
-
-
-static void i596_display_data(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct i596_cmd *cmd;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-
-	printk("lp and scp at %p, .sysbus = %08x, .iscp = %08x\n",
-	       &lp->scp, lp->scp.sysbus, lp->scp.iscp);
-	printk("iscp at %p, iscp.stat = %08x, .scb = %08x\n",
-	       &lp->iscp, lp->iscp.stat, lp->iscp.scb);
-	printk("scb at %p, scb.status = %04x, .command = %04x,"
-		" .cmd = %08x, .rfd = %08x\n",
-	       &lp->scb, lp->scb.status, lp->scb.command,
-		lp->scb.cmd, lp->scb.rfd);
-	printk("   errors: crc %x, align %x, resource %x,"
-               " over %x, rcvdt %x, short %x\n",
-		lp->scb.crc_err, lp->scb.align_err, lp->scb.resource_err,
-		lp->scb.over_err, lp->scb.rcvdt_err, lp->scb.short_err);
-	cmd = lp->cmd_head;
-	while (cmd != NULL) {
-		printk("cmd at %p, .status = %04x, .command = %04x, .b_next = %08x\n",
-		  cmd, cmd->status, cmd->command, cmd->b_next);
-		cmd = cmd->v_next;
-	}
-	rfd = lp->rfd_head;
-	printk("rfd_head = %p\n", rfd);
-	do {
-		printk("   %p .stat %04x, .cmd %04x, b_next %08x, rbd %08x,"
-                        " count %04x\n",
-			rfd, rfd->stat, rfd->cmd, rfd->b_next, rfd->rbd,
-			rfd->count);
-		rfd = rfd->v_next;
-	} while (rfd != lp->rfd_head);
-	rbd = lp->rbd_head;
-	printk("rbd_head = %p\n", rbd);
-	do {
-		printk("   %p .count %04x, b_next %08x, b_data %08x, size %04x\n",
-			rbd, rbd->count, rbd->b_next, rbd->b_data, rbd->size);
-		rbd = rbd->v_next;
-	} while (rbd != lp->rbd_head);
-	CHECK_INV(lp, lp, sizeof(struct i596_private));
-}
-
-
-#if defined(ENABLE_MVME16x_NET) || defined(ENABLE_BVME6000_NET)
-static void i596_error(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	volatile unsigned char *pcc2 = (unsigned char *) 0xfff42000;
-
-	pcc2[0x28] = 1;
-	pcc2[0x2b] = 0x1d;
-	printk("%s: Error interrupt\n", dev->name);
-	i596_display_data(dev);
-}
-#endif
-
-#define virt_to_dma(lp,v) ((lp)->dma_addr + (dma_addr_t)((unsigned long)(v)-(unsigned long)(lp)))
-
-static inline void init_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	int i;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-
-	/* First build the Receive Buffer Descriptor List */
-
-	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
-		dma_addr_t dma_addr;
-		struct sk_buff *skb = dev_alloc_skb(PKT_BUF_SZ + 4);
-
-		if (skb == NULL)
-			panic("%s: alloc_skb() failed", __FILE__);
-		skb_reserve(skb, 2);
-		dma_addr = dma_map_single(lp->dev, skb->data,PKT_BUF_SZ,
-					  DMA_FROM_DEVICE);
-		skb->dev = dev;
-		rbd->v_next = rbd+1;
-		rbd->b_next = WSWAPrbd(virt_to_dma(lp,rbd+1));
-		rbd->b_addr = WSWAPrbd(virt_to_dma(lp,rbd));
-		rbd->skb = skb;
-		rbd->v_data = skb->data;
-		rbd->b_data = WSWAPchar(dma_addr);
-		rbd->size = PKT_BUF_SZ;
-	}
-	lp->rbd_head = lp->rbds;
-	rbd = lp->rbds + rx_ring_size - 1;
-	rbd->v_next = lp->rbds;
-	rbd->b_next = WSWAPrbd(virt_to_dma(lp,lp->rbds));
-
-	/* Now build the Receive Frame Descriptor List */
-
-	for (i = 0, rfd = lp->rfds; i < rx_ring_size; i++, rfd++) {
-		rfd->rbd = I596_NULL;
-		rfd->v_next = rfd+1;
-		rfd->v_prev = rfd-1;
-		rfd->b_next = WSWAPrfd(virt_to_dma(lp,rfd+1));
-		rfd->cmd = CMD_FLEX;
-	}
-	lp->rfd_head = lp->rfds;
-	lp->scb.rfd = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	rfd = lp->rfds;
-	rfd->rbd = WSWAPrbd(virt_to_dma(lp,lp->rbd_head));
-	rfd->v_prev = lp->rfds + rx_ring_size - 1;
-	rfd = lp->rfds + rx_ring_size - 1;
-	rfd->v_next = lp->rfds;
-	rfd->b_next = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	rfd->cmd = CMD_EOL|CMD_FLEX;
-
-	CHECK_WBACK_INV(lp, lp, sizeof(struct i596_private));
-}
-
-static inline void remove_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct i596_rbd *rbd;
-	int i;
-
-	for (i = 0, rbd = lp->rbds; i < rx_ring_size; i++, rbd++) {
-		if (rbd->skb == NULL)
-			break;
-		dma_unmap_single(lp->dev,
-				 (dma_addr_t)WSWAPchar(rbd->b_data),
-				 PKT_BUF_SZ, DMA_FROM_DEVICE);
-		dev_kfree_skb(rbd->skb);
-	}
-}
-
-
-static void rebuild_rx_bufs(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	int i;
-
-	/* Ensure rx frame/buffer descriptors are tidy */
-
-	for (i = 0; i < rx_ring_size; i++) {
-		lp->rfds[i].rbd = I596_NULL;
-		lp->rfds[i].cmd = CMD_FLEX;
-	}
-	lp->rfds[rx_ring_size-1].cmd = CMD_EOL|CMD_FLEX;
-	lp->rfd_head = lp->rfds;
-	lp->scb.rfd = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	lp->rbd_head = lp->rbds;
-	lp->rfds[0].rbd = WSWAPrbd(virt_to_dma(lp,lp->rbds));
-
-	CHECK_WBACK_INV(lp, lp, sizeof(struct i596_private));
-}
-
-
-static int init_i596_mem(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	unsigned long flags;
-
-	disable_irq(dev->irq);	/* disable IRQs from LAN */
-	DEB(DEB_INIT,
-		printk("RESET 82596 port: %lx (with IRQ %d disabled)\n",
-		       (dev->base_addr + PA_I82596_RESET),
-		       dev->irq));
-
-	gsc_writel(0, (dev->base_addr + PA_I82596_RESET)); /* Hard Reset */
-	udelay(100);			/* Wait 100us - seems to help */
-
-	/* change the scp address */
-
-	lp->last_cmd = jiffies;
-
-
-	lp->scp.sysbus = 0x0000006c;
-	lp->scp.iscp = WSWAPiscp(virt_to_dma(lp,&(lp->iscp)));
-	lp->iscp.scb = WSWAPscb(virt_to_dma(lp,&(lp->scb)));
-	lp->iscp.stat = ISCP_BUSY;
-	lp->cmd_backlog = 0;
-
-	lp->cmd_head = NULL;
-        lp->scb.cmd = I596_NULL;
-
-	DEB(DEB_INIT, printk("%s: starting i82596.\n", dev->name));
-
-	CHECK_WBACK(lp, &(lp->scp), sizeof(struct i596_scp));
-	CHECK_WBACK(lp, &(lp->iscp), sizeof(struct i596_iscp));
-
-	MPU_PORT(dev, PORT_ALTSCP, virt_to_dma(lp,&lp->scp));
-
-	CA(dev);
-
-	if (wait_istat(dev, lp, 1000, "initialization timed out"))
-		goto failed;
-	DEB(DEB_INIT, printk("%s: i82596 initialization successful\n", dev->name));
-
-	/* Ensure rx frame/buffer descriptors are tidy */
-	rebuild_rx_bufs(dev);
-
-	lp->scb.command = 0;
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-
-	enable_irq(dev->irq);	/* enable IRQs from LAN */
-
-	DEB(DEB_INIT, printk("%s: queuing CmdConfigure\n", dev->name));
-	memcpy(lp->cf_cmd.i596_config, init_setup, sizeof(init_setup));
-	lp->cf_cmd.cmd.command = CmdConfigure;
-	CHECK_WBACK(lp, &(lp->cf_cmd), sizeof(struct cf_cmd));
-	i596_add_cmd(dev, &lp->cf_cmd.cmd);
-
-	DEB(DEB_INIT, printk("%s: queuing CmdSASetup\n", dev->name));
-	memcpy(lp->sa_cmd.eth_addr, dev->dev_addr, 6);
-	lp->sa_cmd.cmd.command = CmdSASetup;
-	CHECK_WBACK(lp, &(lp->sa_cmd), sizeof(struct sa_cmd));
-	i596_add_cmd(dev, &lp->sa_cmd.cmd);
-
-	DEB(DEB_INIT, printk("%s: queuing CmdTDR\n", dev->name));
-	lp->tdr_cmd.cmd.command = CmdTDR;
-	CHECK_WBACK(lp, &(lp->tdr_cmd), sizeof(struct tdr_cmd));
-	i596_add_cmd(dev, &lp->tdr_cmd.cmd);
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	if (wait_cmd(dev, lp, 1000, "timed out waiting to issue RX_START")) {
-		spin_unlock_irqrestore (&lp->lock, flags);
-		goto failed;
-	}
-	DEB(DEB_INIT, printk("%s: Issuing RX_START\n", dev->name));
-	lp->scb.command = RX_START;
-	lp->scb.rfd = WSWAPrfd(virt_to_dma(lp,lp->rfds));
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-
-	CA(dev);
-
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	if (wait_cmd(dev, lp, 1000, "RX_START not processed"))
-		goto failed;
-	DEB(DEB_INIT, printk("%s: Receive unit started OK\n", dev->name));
-
-	return 0;
-
-failed:
-	printk("%s: Failed to initialise 82596\n", dev->name);
-	MPU_PORT(dev, PORT_RESET, 0);
-	return -1;
-}
-
-
-static inline int i596_rx(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct i596_rfd *rfd;
-	struct i596_rbd *rbd;
-	int frames = 0;
-
-	DEB(DEB_RXFRAME, printk("i596_rx(), rfd_head %p, rbd_head %p\n",
-			lp->rfd_head, lp->rbd_head));
-
-
-	rfd = lp->rfd_head;		/* Ref next frame to check */
-
-	CHECK_INV(lp, rfd, sizeof(struct i596_rfd));
-	while ((rfd->stat) & STAT_C) {	/* Loop while complete frames */
-		if (rfd->rbd == I596_NULL)
-			rbd = NULL;
-		else if (rfd->rbd == lp->rbd_head->b_addr) {
-			rbd = lp->rbd_head;
-			CHECK_INV(lp, rbd, sizeof(struct i596_rbd));
-		}
-		else {
-			printk("%s: rbd chain broken!\n", dev->name);
-			/* XXX Now what? */
-			rbd = NULL;
-		}
-		DEB(DEB_RXFRAME, printk("  rfd %p, rfd.rbd %08x, rfd.stat %04x\n",
-			rfd, rfd->rbd, rfd->stat));
-
-		if (rbd != NULL && ((rfd->stat) & STAT_OK)) {
-			/* a good frame */
-			int pkt_len = rbd->count & 0x3fff;
-			struct sk_buff *skb = rbd->skb;
-			int rx_in_place = 0;
-
-			DEB(DEB_RXADDR,print_eth(rbd->v_data, "received"));
-			frames++;
-
-			/* Check if the packet is long enough to just accept
-			 * without copying to a properly sized skbuff.
-			 */
-
-			if (pkt_len > rx_copybreak) {
-				struct sk_buff *newskb;
-				dma_addr_t dma_addr;
-
-				dma_unmap_single(lp->dev,(dma_addr_t)WSWAPchar(rbd->b_data), PKT_BUF_SZ, DMA_FROM_DEVICE);
-				/* Get fresh skbuff to replace filled one. */
-				newskb = dev_alloc_skb(PKT_BUF_SZ + 4);
-				if (newskb == NULL) {
-					skb = NULL;	/* drop pkt */
-					goto memory_squeeze;
-				}
-				skb_reserve(newskb, 2);
-
-				/* Pass up the skb already on the Rx ring. */
-				skb_put(skb, pkt_len);
-				rx_in_place = 1;
-				rbd->skb = newskb;
-				newskb->dev = dev;
-				dma_addr = dma_map_single(lp->dev, newskb->data, PKT_BUF_SZ, DMA_FROM_DEVICE);
-				rbd->v_data = newskb->data;
-				rbd->b_data = WSWAPchar(dma_addr);
-				CHECK_WBACK_INV(lp, rbd, sizeof(struct i596_rbd));
-			}
-			else
-				skb = dev_alloc_skb(pkt_len + 2);
-memory_squeeze:
-			if (skb == NULL) {
-				/* XXX tulip.c can defer packets here!! */
-				printk("%s: i596_rx Memory squeeze, dropping packet.\n", dev->name);
-				lp->stats.rx_dropped++;
-			}
-			else {
-				if (!rx_in_place) {
-					/* 16 byte align the data fields */
-					dma_sync_single_for_cpu(lp->dev, (dma_addr_t)WSWAPchar(rbd->b_data), PKT_BUF_SZ, DMA_FROM_DEVICE);
-					skb_reserve(skb, 2);
-					memcpy(skb_put(skb,pkt_len), rbd->v_data, pkt_len);
-					dma_sync_single_for_device(lp->dev, (dma_addr_t)WSWAPchar(rbd->b_data), PKT_BUF_SZ, DMA_FROM_DEVICE);
-				}
-				skb->len = pkt_len;
-				skb->protocol=eth_type_trans(skb,dev);
-				netif_rx(skb);
-				dev->last_rx = jiffies;
-				lp->stats.rx_packets++;
-				lp->stats.rx_bytes+=pkt_len;
-			}
-		}
-		else {
-			DEB(DEB_ERRORS, printk("%s: Error, rfd.stat = 0x%04x\n",
-					dev->name, rfd->stat));
-			lp->stats.rx_errors++;
-			if ((rfd->stat) & 0x0001)
-				lp->stats.collisions++;
-			if ((rfd->stat) & 0x0080)
-				lp->stats.rx_length_errors++;
-			if ((rfd->stat) & 0x0100)
-				lp->stats.rx_over_errors++;
-			if ((rfd->stat) & 0x0200)
-				lp->stats.rx_fifo_errors++;
-			if ((rfd->stat) & 0x0400)
-				lp->stats.rx_frame_errors++;
-			if ((rfd->stat) & 0x0800)
-				lp->stats.rx_crc_errors++;
-			if ((rfd->stat) & 0x1000)
-				lp->stats.rx_length_errors++;
-		}
-
-		/* Clear the buffer descriptor count and EOF + F flags */
-
-		if (rbd != NULL && (rbd->count & 0x4000)) {
-			rbd->count = 0;
-			lp->rbd_head = rbd->v_next;
-			CHECK_WBACK_INV(lp, rbd, sizeof(struct i596_rbd));
-		}
-
-		/* Tidy the frame descriptor, marking it as end of list */
-
-		rfd->rbd = I596_NULL;
-		rfd->stat = 0;
-		rfd->cmd = CMD_EOL|CMD_FLEX;
-		rfd->count = 0;
-
-		/* Remove end-of-list from old end descriptor */
-
-		rfd->v_prev->cmd = CMD_FLEX;
-
-		/* Update record of next frame descriptor to process */
-
-		lp->scb.rfd = rfd->b_next;
-		lp->rfd_head = rfd->v_next;
-		CHECK_WBACK_INV(lp, rfd->v_prev, sizeof(struct i596_rfd));
-		CHECK_WBACK_INV(lp, rfd, sizeof(struct i596_rfd));
-		rfd = lp->rfd_head;
-		CHECK_INV(lp, rfd, sizeof(struct i596_rfd));
-	}
-
-	DEB(DEB_RXFRAME, printk("frames %d\n", frames));
-
-	return 0;
-}
-
-
-static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
-{
-	struct i596_cmd *ptr;
-
-	while (lp->cmd_head != NULL) {
-		ptr = lp->cmd_head;
-		lp->cmd_head = ptr->v_next;
-		lp->cmd_backlog--;
-
-		switch ((ptr->command) & 0x7) {
-		case CmdTx:
-			{
-				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
-				struct sk_buff *skb = tx_cmd->skb;
-				dma_unmap_single(lp->dev, tx_cmd->dma_addr, skb->len, DMA_TO_DEVICE);
-
-				dev_kfree_skb(skb);
-
-				lp->stats.tx_errors++;
-				lp->stats.tx_aborted_errors++;
-
-				ptr->v_next = NULL;
-				ptr->b_next = I596_NULL;
-				tx_cmd->cmd.command = 0;  /* Mark as free */
-				break;
-			}
-		default:
-			ptr->v_next = NULL;
-			ptr->b_next = I596_NULL;
-		}
-		CHECK_WBACK_INV(lp, ptr, sizeof(struct i596_cmd));
-	}
-
-	wait_cmd(dev, lp, 100, "i596_cleanup_cmd timed out");
-	lp->scb.cmd = I596_NULL;
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-}
-
-
-static inline void i596_reset(struct net_device *dev, struct i596_private *lp)
-{
-	unsigned long flags;
-
-	DEB(DEB_RESET, printk("i596_reset\n"));
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	wait_cmd(dev, lp, 100, "i596_reset timed out");
-
-	netif_stop_queue(dev);
-
-	/* FIXME: this command might cause an lpmc */
-	lp->scb.command = CUC_ABORT | RX_ABORT;
-	CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-	CA(dev);
-
-	/* wait for shutdown */
-	wait_cmd(dev, lp, 1000, "i596_reset 2 timed out");
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	i596_cleanup_cmd(dev,lp);
-	i596_rx(dev);
-
-	netif_start_queue(dev);
-	init_i596_mem(dev);
-}
-
-
-static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
-{
-	struct i596_private *lp = dev->priv;
-	unsigned long flags;
-
-	DEB(DEB_ADDCMD, printk("i596_add_cmd cmd_head %p\n", lp->cmd_head));
-
-	cmd->status = 0;
-	cmd->command |= (CMD_EOL | CMD_INTR);
-	cmd->v_next = NULL;
-	cmd->b_next = I596_NULL;
-	CHECK_WBACK(lp, cmd, sizeof(struct i596_cmd));
-
-	spin_lock_irqsave (&lp->lock, flags);
-
-	if (lp->cmd_head != NULL) {
-		lp->cmd_tail->v_next = cmd;
-		lp->cmd_tail->b_next = WSWAPcmd(virt_to_dma(lp,&cmd->status));
-		CHECK_WBACK(lp, lp->cmd_tail, sizeof(struct i596_cmd));
-	} else {
-		lp->cmd_head = cmd;
-		wait_cmd(dev, lp, 100, "i596_add_cmd timed out");
-		lp->scb.cmd = WSWAPcmd(virt_to_dma(lp,&cmd->status));
-		lp->scb.command = CUC_START;
-		CHECK_WBACK(lp, &(lp->scb), sizeof(struct i596_scb));
-		CA(dev);
-	}
-	lp->cmd_tail = cmd;
-	lp->cmd_backlog++;
-
-	spin_unlock_irqrestore (&lp->lock, flags);
-
-	if (lp->cmd_backlog > max_cmd_backlog) {
-		unsigned long tickssofar = jiffies - lp->last_cmd;
-
-		if (tickssofar < ticks_limit)
-			return;
-
-		printk("%s: command unit timed out, status resetting.\n", dev->name);
-#if 1
-		i596_reset(dev, lp);
-#endif
-	}
-}
-
-#if 0
-/* this function makes a perfectly adequate probe...  but we have a
-   device list */
-static int i596_test(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	volatile int *tint;
-	u32 data;
-
-	tint = (volatile int *)(&(lp->scp));
-	data = virt_to_dma(lp,tint);
-
-	tint[1] = -1;
-	CHECK_WBACK(lp, tint, PAGE_SIZE);
-
-	MPU_PORT(dev, 1, data);
-
-	for(data = 1000000; data; data--) {
-		CHECK_INV(lp, tint, PAGE_SIZE);
-		if(tint[1] != -1)
-			break;
-
-	}
-
-	printk("i596_test result %d\n", tint[1]);
-
-}
-#endif
-
-
-static int i596_open(struct net_device *dev)
-{
-	DEB(DEB_OPEN, printk("%s: i596_open() irq %d.\n", dev->name, dev->irq));
-
-	if (request_irq(dev->irq, &i596_interrupt, 0, "i82596", dev)) {
-		printk("%s: IRQ %d not free\n", dev->name, dev->irq);
-		goto out;
-	}
-
-	init_rx_bufs(dev);
-
-	if (init_i596_mem(dev)) {
-		printk("%s: Failed to init memory\n", dev->name);
-		goto out_remove_rx_bufs;
-	}
-
-	netif_start_queue(dev);
-
-	return 0;
-
-out_remove_rx_bufs:
-	remove_rx_bufs(dev);
-	free_irq(dev->irq, dev);
-out:
-	return -EAGAIN;
-}
-
-static void i596_tx_timeout (struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-
-	/* Transmitter timeout, serious problems. */
-	DEB(DEB_ERRORS, printk("%s: transmit timed out, status resetting.\n",
-			dev->name));
-
-	lp->stats.tx_errors++;
-
-	/* Try to restart the adaptor */
-	if (lp->last_restart == lp->stats.tx_packets) {
-		DEB(DEB_ERRORS, printk("Resetting board.\n"));
-		/* Shutdown and restart */
-		i596_reset (dev, lp);
-	} else {
-		/* Issue a channel attention signal */
-		DEB(DEB_ERRORS, printk("Kicking board.\n"));
-		lp->scb.command = CUC_START | RX_START;
-		CHECK_WBACK_INV(lp, &(lp->scb), sizeof(struct i596_scb));
-		CA (dev);
-		lp->last_restart = lp->stats.tx_packets;
-	}
-
-	dev->trans_start = jiffies;
-	netif_wake_queue (dev);
-}
-
-
-static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	struct tx_cmd *tx_cmd;
-	struct i596_tbd *tbd;
-	short length = skb->len;
-	dev->trans_start = jiffies;
-
-	DEB(DEB_STARTTX, printk("%s: i596_start_xmit(%x,%p) called\n", dev->name,
-				skb->len, skb->data));
-
-	if (length < ETH_ZLEN) {
-		if (skb_padto(skb, ETH_ZLEN))
-			return 0;
-		length = ETH_ZLEN;
-	}
-
-	netif_stop_queue(dev);
-
-	tx_cmd = lp->tx_cmds + lp->next_tx_cmd;
-	tbd = lp->tbds + lp->next_tx_cmd;
-
-	if (tx_cmd->cmd.command) {
-		DEB(DEB_ERRORS, printk("%s: xmit ring full, dropping packet.\n",
-				dev->name));
-		lp->stats.tx_dropped++;
-
-		dev_kfree_skb(skb);
-	} else {
-		if (++lp->next_tx_cmd == TX_RING_SIZE)
-			lp->next_tx_cmd = 0;
-		tx_cmd->tbd = WSWAPtbd(virt_to_dma(lp,tbd));
-		tbd->next = I596_NULL;
-
-		tx_cmd->cmd.command = CMD_FLEX | CmdTx;
-		tx_cmd->skb = skb;
-
-		tx_cmd->pad = 0;
-		tx_cmd->size = 0;
-		tbd->pad = 0;
-		tbd->size = EOF | length;
-
-		tx_cmd->dma_addr = dma_map_single(lp->dev, skb->data, skb->len,
-				DMA_TO_DEVICE);
-		tbd->data = WSWAPchar(tx_cmd->dma_addr);
-
-		DEB(DEB_TXADDR,print_eth(skb->data, "tx-queued"));
-		CHECK_WBACK_INV(lp, tx_cmd, sizeof(struct tx_cmd));
-		CHECK_WBACK_INV(lp, tbd, sizeof(struct i596_tbd));
-		i596_add_cmd(dev, &tx_cmd->cmd);
-
-		lp->stats.tx_packets++;
-		lp->stats.tx_bytes += length;
-	}
-
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-static void print_eth(unsigned char *add, char *str)
-{
-	int i;
-
-	printk("i596 0x%p, ", add);
-	for (i = 0; i < 6; i++)
-		printk(" %02X", add[i + 6]);
-	printk(" -->");
-	for (i = 0; i < 6; i++)
-		printk(" %02X", add[i]);
-	printk(" %02X%02X, %s\n", add[12], add[13], str);
-}
-
-
 #define LAN_PROM_ADDR	0xF0810000
 
-static int __devinit i82596_probe(struct net_device *dev,
-				  struct device *gen_dev)
-{
-	int i;
-	struct i596_private *lp;
-	char eth_addr[6];
-	dma_addr_t dma_addr;
-
-	/* This lot is ensure things have been cache line aligned. */
-	BUILD_BUG_ON(sizeof(struct i596_rfd) != 32);
-	BUILD_BUG_ON(sizeof(struct i596_rbd) &  31);
-	BUILD_BUG_ON(sizeof(struct tx_cmd)   &  31);
-	BUILD_BUG_ON(sizeof(struct i596_tbd) != 32);
-#ifndef __LP64__
-	BUILD_BUG_ON(sizeof(struct i596_private) > 4096);
-#endif
-
-	if (!dev->base_addr || !dev->irq)
-		return -ENODEV;
-
-	if (pdc_lan_station_id(eth_addr, dev->base_addr)) {
-		for (i=0; i < 6; i++) {
-			eth_addr[i] = gsc_readb(LAN_PROM_ADDR + i);
-		}
-		printk(KERN_INFO "%s: MAC of HP700 LAN read from EEPROM\n", __FILE__);
-	}
-
-	dev->mem_start = (unsigned long) dma_alloc_noncoherent(gen_dev,
-		sizeof(struct i596_private), &dma_addr, GFP_KERNEL);
-	if (!dev->mem_start) {
-		printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = eth_addr[i];
-
-	/* The 82596-specific entries in the device structure. */
-	dev->open = i596_open;
-	dev->stop = i596_close;
-	dev->hard_start_xmit = i596_start_xmit;
-	dev->get_stats = i596_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-	dev->tx_timeout = i596_tx_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = i596_poll_controller;
-#endif
-
-	dev->priv = (void *)(dev->mem_start);
-
-	lp = dev->priv;
-	memset(lp, 0, sizeof(struct i596_private));
-
-	lp->scb.command = 0;
-	lp->scb.cmd = I596_NULL;
-	lp->scb.rfd = I596_NULL;
-	spin_lock_init(&lp->lock);
-	lp->dma_addr = dma_addr;
-	lp->dev = gen_dev;
-
-	CHECK_WBACK_INV(lp, dev->mem_start, sizeof(struct i596_private));
-
-	i = register_netdev(dev);
-	if (i) {
-		lp = dev->priv;
-		dma_free_noncoherent(lp->dev, sizeof(struct i596_private),
-				    (void *)dev->mem_start, lp->dma_addr);
-		return i;
-	};
-
-	DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
-	for (i = 0; i < 6; i++)
-		DEB(DEB_PROBE, printk(" %2.2X", dev->dev_addr[i]));
-	DEB(DEB_PROBE, printk(" IRQ %d.\n", dev->irq));
-	DEB(DEB_INIT, printk(KERN_INFO "%s: lp at 0x%p (%d bytes), lp->scb at 0x%p\n",
-		dev->name, lp, (int)sizeof(struct i596_private), &lp->scb));
-
-	return 0;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void i596_poll_controller(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	i596_interrupt(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-static irqreturn_t i596_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct i596_private *lp;
-	unsigned short status, ack_cmd = 0;
-
-	if (dev == NULL) {
-		printk("%s: irq %d for unknown device.\n", __FUNCTION__, irq);
-		return IRQ_NONE;
-	}
-
-	lp = dev->priv;
-
-	spin_lock (&lp->lock);
-
-	wait_cmd(dev, lp, 100, "i596 interrupt, timeout");
-	status = lp->scb.status;
-
-	DEB(DEB_INTS, printk("%s: i596 interrupt, IRQ %d, status %4.4x.\n",
-			dev->name, irq, status));
-
-	ack_cmd = status & 0xf000;
-
-	if (!ack_cmd) {
-		DEB(DEB_ERRORS, printk("%s: interrupt with no events\n", dev->name));
-		spin_unlock (&lp->lock);
-		return IRQ_NONE;
-	}
-
-	if ((status & 0x8000) || (status & 0x2000)) {
-		struct i596_cmd *ptr;
-
-		if ((status & 0x8000))
-			DEB(DEB_INTS, printk("%s: i596 interrupt completed command.\n", dev->name));
-		if ((status & 0x2000))
-			DEB(DEB_INTS, printk("%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
-
-		while (lp->cmd_head != NULL) {
-			CHECK_INV(lp, lp->cmd_head, sizeof(struct i596_cmd));
-			if (!(lp->cmd_head->status & STAT_C))
-				break;
-
-			ptr = lp->cmd_head;
-
-			DEB(DEB_STATUS, printk("cmd_head->status = %04x, ->command = %04x\n",
-				       lp->cmd_head->status, lp->cmd_head->command));
-			lp->cmd_head = ptr->v_next;
-			lp->cmd_backlog--;
-
-			switch ((ptr->command) & 0x7) {
-			case CmdTx:
-			    {
-				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
-				struct sk_buff *skb = tx_cmd->skb;
-
-				if ((ptr->status) & STAT_OK) {
-					DEB(DEB_TXADDR, print_eth(skb->data, "tx-done"));
-				} else {
-					lp->stats.tx_errors++;
-					if ((ptr->status) & 0x0020)
-						lp->stats.collisions++;
-					if (!((ptr->status) & 0x0040))
-						lp->stats.tx_heartbeat_errors++;
-					if ((ptr->status) & 0x0400)
-						lp->stats.tx_carrier_errors++;
-					if ((ptr->status) & 0x0800)
-						lp->stats.collisions++;
-					if ((ptr->status) & 0x1000)
-						lp->stats.tx_aborted_errors++;
-				}
-				dma_unmap_single(lp->dev, tx_cmd->dma_addr, skb->len, DMA_TO_DEVICE);
-				dev_kfree_skb_irq(skb);
-
-				tx_cmd->cmd.command = 0; /* Mark free */
-				break;
-			    }
-			case CmdTDR:
-			    {
-				unsigned short status = ((struct tdr_cmd *)ptr)->status;
-
-				if (status & 0x8000) {
-					DEB(DEB_ANY, printk("%s: link ok.\n", dev->name));
-				} else {
-					if (status & 0x4000)
-						printk("%s: Transceiver problem.\n", dev->name);
-					if (status & 0x2000)
-						printk("%s: Termination problem.\n", dev->name);
-					if (status & 0x1000)
-						printk("%s: Short circuit.\n", dev->name);
-
-					DEB(DEB_TDR, printk("%s: Time %d.\n", dev->name, status & 0x07ff));
-				}
-				break;
-			    }
-			case CmdConfigure:
-				/* Zap command so set_multicast_list() knows it is free */
-				ptr->command = 0;
-				break;
-			}
-			ptr->v_next = NULL;
-		        ptr->b_next = I596_NULL;
-			CHECK_WBACK(lp, ptr, sizeof(struct i596_cmd));
-			lp->last_cmd = jiffies;
-		}
-
-		/* This mess is arranging that only the last of any outstanding
-		 * commands has the interrupt bit set.  Should probably really
-		 * only add to the cmd queue when the CU is stopped.
-		 */
-		ptr = lp->cmd_head;
-		while ((ptr != NULL) && (ptr != lp->cmd_tail)) {
-			struct i596_cmd *prev = ptr;
-
-			ptr->command &= 0x1fff;
-			ptr = ptr->v_next;
-			CHECK_WBACK_INV(lp, prev, sizeof(struct i596_cmd));
-		}
-
-		if ((lp->cmd_head != NULL))
-			ack_cmd |= CUC_START;
-		lp->scb.cmd = WSWAPcmd(virt_to_dma(lp,&lp->cmd_head->status));
-		CHECK_WBACK_INV(lp, &lp->scb, sizeof(struct i596_scb));
-	}
-	if ((status & 0x1000) || (status & 0x4000)) {
-		if ((status & 0x4000))
-			DEB(DEB_INTS, printk("%s: i596 interrupt received a frame.\n", dev->name));
-		i596_rx(dev);
-		/* Only RX_START if stopped - RGH 07-07-96 */
-		if (status & 0x1000) {
-			if (netif_running(dev)) {
-				DEB(DEB_ERRORS, printk("%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
-				ack_cmd |= RX_START;
-				lp->stats.rx_errors++;
-				lp->stats.rx_fifo_errors++;
-				rebuild_rx_bufs(dev);
-			}
-		}
-	}
-	wait_cmd(dev, lp, 100, "i596 interrupt, timeout");
-	lp->scb.command = ack_cmd;
-	CHECK_WBACK(lp, &lp->scb, sizeof(struct i596_scb));
-
-	/* DANGER: I suspect that some kind of interrupt
-	 acknowledgement aside from acking the 82596 might be needed
-	 here...  but it's running acceptably without */
-
-	CA(dev);
-
-	wait_cmd(dev, lp, 100, "i596 interrupt, exit timeout");
-	DEB(DEB_INTS, printk("%s: exiting interrupt.\n", dev->name));
-
-	spin_unlock (&lp->lock);
-	return IRQ_HANDLED;
-}
-
-static int i596_close(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	unsigned long flags;
-
-	netif_stop_queue(dev);
-
-	DEB(DEB_INIT, printk("%s: Shutting down ethercard, status was %4.4x.\n",
-		       dev->name, lp->scb.status));
-
-	spin_lock_irqsave(&lp->lock, flags);
-
-	wait_cmd(dev, lp, 100, "close1 timed out");
-	lp->scb.command = CUC_ABORT | RX_ABORT;
-	CHECK_WBACK(lp, &lp->scb, sizeof(struct i596_scb));
-
-	CA(dev);
-
-	wait_cmd(dev, lp, 100, "close2 timed out");
-	spin_unlock_irqrestore(&lp->lock, flags);
-	DEB(DEB_STRUCT,i596_display_data(dev));
-	i596_cleanup_cmd(dev,lp);
-
-	disable_irq(dev->irq);
-
-	free_irq(dev->irq, dev);
-	remove_rx_bufs(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *
- i596_get_stats(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-
-	return &lp->stats;
-}
-
-/*
- *    Set or clear the multicast filter for this adaptor.
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct i596_private *lp = dev->priv;
-	int config = 0, cnt;
-
-	DEB(DEB_MULTI, printk("%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
-		dev->name, dev->mc_count, dev->flags & IFF_PROMISC ? "ON" : "OFF",
-		dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
-
-	if ((dev->flags & IFF_PROMISC) && !(lp->cf_cmd.i596_config[8] & 0x01)) {
-		lp->cf_cmd.i596_config[8] |= 0x01;
-		config = 1;
-	}
-	if (!(dev->flags & IFF_PROMISC) && (lp->cf_cmd.i596_config[8] & 0x01)) {
-		lp->cf_cmd.i596_config[8] &= ~0x01;
-		config = 1;
-	}
-	if ((dev->flags & IFF_ALLMULTI) && (lp->cf_cmd.i596_config[11] & 0x20)) {
-		lp->cf_cmd.i596_config[11] &= ~0x20;
-		config = 1;
-	}
-	if (!(dev->flags & IFF_ALLMULTI) && !(lp->cf_cmd.i596_config[11] & 0x20)) {
-		lp->cf_cmd.i596_config[11] |= 0x20;
-		config = 1;
-	}
-	if (config) {
-		if (lp->cf_cmd.cmd.command)
-			printk("%s: config change request already queued\n",
-			       dev->name);
-		else {
-			lp->cf_cmd.cmd.command = CmdConfigure;
-			CHECK_WBACK_INV(lp, &lp->cf_cmd, sizeof(struct cf_cmd));
-			i596_add_cmd(dev, &lp->cf_cmd.cmd);
-		}
-	}
-
-	cnt = dev->mc_count;
-	if (cnt > MAX_MC_CNT)
-	{
-		cnt = MAX_MC_CNT;
-		printk("%s: Only %d multicast addresses supported",
-			dev->name, cnt);
-	}
-
-	if (dev->mc_count > 0) {
-		struct dev_mc_list *dmi;
-		unsigned char *cp;
-		struct mc_cmd *cmd;
-
-		cmd = &lp->mc_cmd;
-		cmd->cmd.command = CmdMulticastList;
-		cmd->mc_cnt = dev->mc_count * 6;
-		cp = cmd->mc_addrs;
-		for (dmi = dev->mc_list; cnt && dmi != NULL; dmi = dmi->next, cnt--, cp += 6) {
-			memcpy(cp, dmi->dmi_addr, 6);
-			if (i596_debug > 1)
-				DEB(DEB_MULTI, printk("%s: Adding address %02x:%02x:%02x:%02x:%02x:%02x\n",
-						dev->name, cp[0],cp[1],cp[2],cp[3],cp[4],cp[5]));
-		}
-		CHECK_WBACK_INV(lp, &lp->mc_cmd, sizeof(struct mc_cmd));
-		i596_add_cmd(dev, &cmd->cmd);
-	}
-}
-
-static int debug = -1;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "lasi_82596 debug mask");
-
-static int num_drivers;
-static struct net_device *netdevs[MAX_DRIVERS];
-
 static int __devinit
 lan_init_chip(struct parisc_device *dev)
 {
 	struct	net_device *netdevice;
+	struct i596_private *lp;
 	int	retval;
-
-	if (num_drivers >= MAX_DRIVERS) {
-		/* max count of possible i82596 drivers reached */
-		return -ENOMEM;
-	}
-
-	if (num_drivers == 0)
-		printk(KERN_INFO LASI_82596_DRIVER_VERSION "\n");
+	int i;
 
 	if (!dev->irq) {
 		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
@@ -1528,28 +168,45 @@ lan_init_chip(struct parisc_device *dev)
 	printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start,
 			dev->irq);
 
-	netdevice = alloc_etherdev(0);
+	netdevice = alloc_etherdev(sizeof(struct i596_private));
 	if (!netdevice)
 		return -ENOMEM;
+	SET_NETDEV_DEV(netdevice, &dev->dev);
+	parisc_set_drvdata (dev, netdevice);
 
 	netdevice->base_addr = dev->hpa.start;
 	netdevice->irq = dev->irq;
 
-	retval = i82596_probe(netdevice, &dev->dev);
+	if (pdc_lan_station_id(netdevice->dev_addr, netdevice->base_addr)) {
+		for (i = 0; i < 6; i++) {
+			netdevice->dev_addr[i] = gsc_readb(LAN_PROM_ADDR + i);
+		}
+		printk(KERN_INFO
+		       "%s: MAC of HP700 LAN read from EEPROM\n", __FILE__);
+	}
+
+	lp = netdev_priv(netdevice);
+	lp->options = dev->id.sversion == 0x72 ? OPT_SWAP_PORT : 0;
+
+	retval = i82596_probe(netdevice);
 	if (retval) {
 		free_netdev(netdevice);
 		return -ENODEV;
 	}
-
-	if (dev->id.sversion == 0x72) {
-		((struct i596_private *)netdevice->priv)->options = OPT_SWAP_PORT;
-	}
-
-	netdevs[num_drivers++] = netdevice;
-
 	return retval;
 }
 
+static int __devexit lan_remove_chip (struct parisc_device *pdev)
+{
+	struct net_device *dev = parisc_get_drvdata(pdev);
+	struct i596_private *lp = netdev_priv(dev);
+
+	unregister_netdev (dev);
+	DMA_FREE(&pdev->dev, sizeof(struct i596_private),
+		 (void *)lp->dma, lp->dma_addr);
+	free_netdev (dev);
+	return 0;
+}
 
 static struct parisc_device_id lan_tbl[] = {
 	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008a },
@@ -1563,12 +220,12 @@ static struct parisc_driver lan_driver = {
 	.name		= "lasi_82596",
 	.id_table	= lan_tbl,
 	.probe		= lan_init_chip,
+	.remove         = __devexit_p(lan_remove_chip),
 };
 
 static int __devinit lasi_82596_init(void)
 {
-	if (debug >= 0)
-		i596_debug = debug;
+	printk(KERN_INFO LASI_82596_DRIVER_VERSION "\n");
 	return register_parisc_driver(&lan_driver);
 }
 
@@ -1576,25 +233,6 @@ module_init(lasi_82596_init);
 
 static void __exit lasi_82596_exit(void)
 {
-	int i;
-
-	for (i=0; i<MAX_DRIVERS; i++) {
-		struct i596_private *lp;
-		struct net_device *netdevice;
-
-		netdevice = netdevs[i];
-		if (!netdevice)
-			continue;
-
-		unregister_netdev(netdevice);
-
-		lp = netdevice->priv;
-		dma_free_noncoherent(lp->dev, sizeof(struct i596_private),
-				       (void *)netdevice->mem_start, lp->dma_addr);
-		free_netdev(netdevice);
-	}
-	num_drivers = 0;
-
 	unregister_parisc_driver(&lan_driver);
 }
 
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
new file mode 100644
index 000000000000..5884f5bd04a4
--- /dev/null
+++ b/drivers/net/lib82596.c
@@ -0,0 +1,1434 @@
+/* lasi_82596.c -- driver for the intel 82596 ethernet controller, as
+   munged into HPPA boxen .
+
+   This driver is based upon 82596.c, original credits are below...
+   but there were too many hoops which HP wants jumped through to
+   keep this code in there in a sane manner.
+
+   3 primary sources of the mess --
+   1) hppa needs *lots* of cacheline flushing to keep this kind of
+   MMIO running.
+
+   2) The 82596 needs to see all of its pointers as their physical
+   address.  Thus virt_to_bus/bus_to_virt are *everywhere*.
+
+   3) The implementation HP is using seems to be significantly pickier
+   about when and how the command and RX units are started.  some
+   command ordering was changed.
+
+   Examination of the mach driver leads one to believe that there
+   might be a saner way to pull this off...  anyone who feels like a
+   full rewrite can be my guest.
+
+   Split 02/13/2000 Sam Creasey (sammy@oh.verio.com)
+
+   02/01/2000  Initial modifications for parisc by Helge Deller (deller@gmx.de)
+   03/02/2000  changes for better/correct(?) cache-flushing (deller)
+*/
+
+/* 82596.c: A generic 82596 ethernet driver for linux. */
+/*
+   Based on Apricot.c
+   Written 1994 by Mark Evans.
+   This driver is for the Apricot 82596 bus-master interface
+
+   Modularised 12/94 Mark Evans
+
+
+   Modified to support the 82596 ethernet chips on 680x0 VME boards.
+   by Richard Hirst <richard@sleepie.demon.co.uk>
+   Renamed to be 82596.c
+
+   980825:  Changed to receive directly in to sk_buffs which are
+   allocated at open() time.  Eliminates copy on incoming frames
+   (small ones are still copied).  Shared data now held in a
+   non-cached page, so we can run on 68060 in copyback mode.
+
+   TBD:
+   * look at deferring rx frames rather than discarding (as per tulip)
+   * handle tx ring full as per tulip
+   * performace test to tune rx_copybreak
+
+   Most of my modifications relate to the braindead big-endian
+   implementation by Intel.  When the i596 is operating in
+   'big-endian' mode, it thinks a 32 bit value of 0x12345678
+   should be stored as 0x56781234.  This is a real pain, when
+   you have linked lists which are shared by the 680x0 and the
+   i596.
+
+   Driver skeleton
+   Written 1993 by Donald Becker.
+   Copyright 1993 United States Government as represented by the Director,
+   National Security Agency. This software may only be used and distributed
+   according to the terms of the GNU General Public License as modified by SRC,
+   incorporated herein by reference.
+
+   The author may be reached as becker@scyld.com, or C/O
+   Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
+
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+/* DEBUG flags
+ */
+
+#define DEB_INIT	0x0001
+#define DEB_PROBE	0x0002
+#define DEB_SERIOUS	0x0004
+#define DEB_ERRORS	0x0008
+#define DEB_MULTI	0x0010
+#define DEB_TDR		0x0020
+#define DEB_OPEN	0x0040
+#define DEB_RESET	0x0080
+#define DEB_ADDCMD	0x0100
+#define DEB_STATUS	0x0200
+#define DEB_STARTTX	0x0400
+#define DEB_RXADDR	0x0800
+#define DEB_TXADDR	0x1000
+#define DEB_RXFRAME	0x2000
+#define DEB_INTS	0x4000
+#define DEB_STRUCT	0x8000
+#define DEB_ANY		0xffff
+
+
+#define DEB(x, y)	if (i596_debug & (x)) { y; }
+
+
+/*
+ * The MPU_PORT command allows direct access to the 82596. With PORT access
+ * the following commands are available (p5-18). The 32-bit port command
+ * must be word-swapped with the most significant word written first.
+ * This only applies to VME boards.
+ */
+#define PORT_RESET		0x00	/* reset 82596 */
+#define PORT_SELFTEST		0x01	/* selftest */
+#define PORT_ALTSCP		0x02	/* alternate SCB address */
+#define PORT_ALTDUMP		0x03	/* Alternate DUMP address */
+
+static int i596_debug = (DEB_SERIOUS|DEB_PROBE);
+
+/* Copy frames shorter than rx_copybreak, otherwise pass on up in
+ * a full sized sk_buff.  Value of 100 stolen from tulip.c (!alpha).
+ */
+static int rx_copybreak = 100;
+
+#define PKT_BUF_SZ	1536
+#define MAX_MC_CNT	64
+
+#define ISCP_BUSY	0x0001
+
+#define I596_NULL ((u32)0xffffffff)
+
+#define CMD_EOL		0x8000	/* The last command of the list, stop. */
+#define CMD_SUSP	0x4000	/* Suspend after doing cmd. */
+#define CMD_INTR	0x2000	/* Interrupt after doing cmd. */
+
+#define CMD_FLEX	0x0008	/* Enable flexible memory model */
+
+enum commands {
+	CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
+	CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7
+};
+
+#define STAT_C		0x8000	/* Set to 0 after execution */
+#define STAT_B		0x4000	/* Command being executed */
+#define STAT_OK		0x2000	/* Command executed ok */
+#define STAT_A		0x1000	/* Command aborted */
+
+#define	 CUC_START	0x0100
+#define	 CUC_RESUME	0x0200
+#define	 CUC_SUSPEND    0x0300
+#define	 CUC_ABORT	0x0400
+#define	 RX_START	0x0010
+#define	 RX_RESUME	0x0020
+#define	 RX_SUSPEND	0x0030
+#define	 RX_ABORT	0x0040
+
+#define TX_TIMEOUT	5
+
+
+struct i596_reg {
+	unsigned short porthi;
+	unsigned short portlo;
+	u32            ca;
+};
+
+#define EOF		0x8000
+#define SIZE_MASK	0x3fff
+
+struct i596_tbd {
+	unsigned short size;
+	unsigned short pad;
+	dma_addr_t     next;
+	dma_addr_t     data;
+	u32 cache_pad[5];		/* Total 32 bytes... */
+};
+
+/* The command structure has two 'next' pointers; v_next is the address of
+ * the next command as seen by the CPU, b_next is the address of the next
+ * command as seen by the 82596.  The b_next pointer, as used by the 82596
+ * always references the status field of the next command, rather than the
+ * v_next field, because the 82596 is unaware of v_next.  It may seem more
+ * logical to put v_next at the end of the structure, but we cannot do that
+ * because the 82596 expects other fields to be there, depending on command
+ * type.
+ */
+
+struct i596_cmd {
+	struct i596_cmd *v_next;	/* Address from CPUs viewpoint */
+	unsigned short status;
+	unsigned short command;
+	dma_addr_t     b_next;	/* Address from i596 viewpoint */
+};
+
+struct tx_cmd {
+	struct i596_cmd cmd;
+	dma_addr_t     tbd;
+	unsigned short size;
+	unsigned short pad;
+	struct sk_buff *skb;		/* So we can free it after tx */
+	dma_addr_t dma_addr;
+#ifdef __LP64__
+	u32 cache_pad[6];		/* Total 64 bytes... */
+#else
+	u32 cache_pad[1];		/* Total 32 bytes... */
+#endif
+};
+
+struct tdr_cmd {
+	struct i596_cmd cmd;
+	unsigned short status;
+	unsigned short pad;
+};
+
+struct mc_cmd {
+	struct i596_cmd cmd;
+	short mc_cnt;
+	char mc_addrs[MAX_MC_CNT*6];
+};
+
+struct sa_cmd {
+	struct i596_cmd cmd;
+	char eth_addr[8];
+};
+
+struct cf_cmd {
+	struct i596_cmd cmd;
+	char i596_config[16];
+};
+
+struct i596_rfd {
+	unsigned short stat;
+	unsigned short cmd;
+	dma_addr_t     b_next;	/* Address from i596 viewpoint */
+	dma_addr_t     rbd;
+	unsigned short count;
+	unsigned short size;
+	struct i596_rfd *v_next;	/* Address from CPUs viewpoint */
+	struct i596_rfd *v_prev;
+#ifndef __LP64__
+	u32 cache_pad[2];		/* Total 32 bytes... */
+#endif
+};
+
+struct i596_rbd {
+    /* hardware data */
+    unsigned short count;
+    unsigned short zero1;
+    dma_addr_t     b_next;
+    dma_addr_t     b_data;		/* Address from i596 viewpoint */
+    unsigned short size;
+    unsigned short zero2;
+    /* driver data */
+    struct sk_buff *skb;
+    struct i596_rbd *v_next;
+    dma_addr_t     b_addr;		/* This rbd addr from i596 view */
+    unsigned char *v_data;		/* Address from CPUs viewpoint */
+					/* Total 32 bytes... */
+#ifdef __LP64__
+    u32 cache_pad[4];
+#endif
+};
+
+/* These values as chosen so struct i596_dma fits in one page... */
+
+#define TX_RING_SIZE 32
+#define RX_RING_SIZE 16
+
+struct i596_scb {
+	unsigned short status;
+	unsigned short command;
+	dma_addr_t    cmd;
+	dma_addr_t    rfd;
+	u32           crc_err;
+	u32           align_err;
+	u32           resource_err;
+	u32           over_err;
+	u32           rcvdt_err;
+	u32           short_err;
+	unsigned short t_on;
+	unsigned short t_off;
+};
+
+struct i596_iscp {
+	u32           stat;
+	dma_addr_t    scb;
+};
+
+struct i596_scp {
+	u32           sysbus;
+	u32           pad;
+	dma_addr_t    iscp;
+};
+
+struct i596_dma {
+	struct i596_scp scp		        __attribute__((aligned(32)));
+	volatile struct i596_iscp iscp		__attribute__((aligned(32)));
+	volatile struct i596_scb scb		__attribute__((aligned(32)));
+	struct sa_cmd sa_cmd			__attribute__((aligned(32)));
+	struct cf_cmd cf_cmd			__attribute__((aligned(32)));
+	struct tdr_cmd tdr_cmd			__attribute__((aligned(32)));
+	struct mc_cmd mc_cmd			__attribute__((aligned(32)));
+	struct i596_rfd rfds[RX_RING_SIZE]	__attribute__((aligned(32)));
+	struct i596_rbd rbds[RX_RING_SIZE]	__attribute__((aligned(32)));
+	struct tx_cmd tx_cmds[TX_RING_SIZE]	__attribute__((aligned(32)));
+	struct i596_tbd tbds[TX_RING_SIZE]	__attribute__((aligned(32)));
+};
+
+struct i596_private {
+	struct i596_dma *dma;
+	u32    stat;
+	int last_restart;
+	struct i596_rfd *rfd_head;
+	struct i596_rbd *rbd_head;
+	struct i596_cmd *cmd_tail;
+	struct i596_cmd *cmd_head;
+	int cmd_backlog;
+	u32    last_cmd;
+	struct net_device_stats stats;
+	int next_tx_cmd;
+	int options;
+	spinlock_t lock;       /* serialize access to chip */
+	dma_addr_t dma_addr;
+	void __iomem *mpu_port;
+	void __iomem *ca;
+};
+
+static const char init_setup[] =
+{
+	0x8E,		/* length, prefetch on */
+	0xC8,		/* fifo to 8, monitor off */
+	0x80,		/* don't save bad frames */
+	0x2E,		/* No source address insertion, 8 byte preamble */
+	0x00,		/* priority and backoff defaults */
+	0x60,		/* interframe spacing */
+	0x00,		/* slot time LSB */
+	0xf2,		/* slot time and retries */
+	0x00,		/* promiscuous mode */
+	0x00,		/* collision detect */
+	0x40,		/* minimum frame length */
+	0xff,
+	0x00,
+	0x7f /*  *multi IA */ };
+
+static int i596_open(struct net_device *dev);
+static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t i596_interrupt(int irq, void *dev_id);
+static int i596_close(struct net_device *dev);
+static struct net_device_stats *i596_get_stats(struct net_device *dev);
+static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd);
+static void i596_tx_timeout (struct net_device *dev);
+static void print_eth(unsigned char *buf, char *str);
+static void set_multicast_list(struct net_device *dev);
+static inline void ca(struct net_device *dev);
+static void mpu_port(struct net_device *dev, int c, dma_addr_t x);
+
+static int rx_ring_size = RX_RING_SIZE;
+static int ticks_limit = 100;
+static int max_cmd_backlog = TX_RING_SIZE-1;
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev);
+#endif
+
+
+static inline int wait_istat(struct net_device *dev, struct i596_dma *dma, int delcnt, char *str)
+{
+	DMA_INV(dev, &(dma->iscp), sizeof(struct i596_iscp));
+	while (--delcnt && dma->iscp.stat) {
+		udelay(10);
+		DMA_INV(dev, &(dma->iscp), sizeof(struct i596_iscp));
+	}
+	if (!delcnt) {
+		printk(KERN_ERR "%s: %s, iscp.stat %04x, didn't clear\n",
+		     dev->name, str, SWAP16(dma->iscp.stat));
+		return -1;
+	} else
+		return 0;
+}
+
+
+static inline int wait_cmd(struct net_device *dev, struct i596_dma *dma, int delcnt, char *str)
+{
+	DMA_INV(dev, &(dma->scb), sizeof(struct i596_scb));
+	while (--delcnt && dma->scb.command) {
+		udelay(10);
+		DMA_INV(dev, &(dma->scb), sizeof(struct i596_scb));
+	}
+	if (!delcnt) {
+		printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
+		       dev->name, str,
+		       SWAP16(dma->scb.status),
+		       SWAP16(dma->scb.command));
+		return -1;
+	} else
+		return 0;
+}
+
+
+static void i596_display_data(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	struct i596_cmd *cmd;
+	struct i596_rfd *rfd;
+	struct i596_rbd *rbd;
+
+	printk(KERN_DEBUG "lp and scp at %p, .sysbus = %08x, .iscp = %08x\n",
+	       &dma->scp, dma->scp.sysbus, SWAP32(dma->scp.iscp));
+	printk(KERN_DEBUG "iscp at %p, iscp.stat = %08x, .scb = %08x\n",
+	       &dma->iscp, SWAP32(dma->iscp.stat), SWAP32(dma->iscp.scb));
+	printk(KERN_DEBUG "scb at %p, scb.status = %04x, .command = %04x,"
+		" .cmd = %08x, .rfd = %08x\n",
+	       &dma->scb, SWAP16(dma->scb.status), SWAP16(dma->scb.command),
+		SWAP16(dma->scb.cmd), SWAP32(dma->scb.rfd));
+	printk(KERN_DEBUG "   errors: crc %x, align %x, resource %x,"
+	       " over %x, rcvdt %x, short %x\n",
+	       SWAP32(dma->scb.crc_err), SWAP32(dma->scb.align_err),
+	       SWAP32(dma->scb.resource_err), SWAP32(dma->scb.over_err),
+	       SWAP32(dma->scb.rcvdt_err), SWAP32(dma->scb.short_err));
+	cmd = lp->cmd_head;
+	while (cmd != NULL) {
+		printk(KERN_DEBUG
+		       "cmd at %p, .status = %04x, .command = %04x,"
+		       " .b_next = %08x\n",
+		       cmd, SWAP16(cmd->status), SWAP16(cmd->command),
+		       SWAP32(cmd->b_next));
+		cmd = cmd->v_next;
+	}
+	rfd = lp->rfd_head;
+	printk(KERN_DEBUG "rfd_head = %p\n", rfd);
+	do {
+		printk(KERN_DEBUG
+		       "   %p .stat %04x, .cmd %04x, b_next %08x, rbd %08x,"
+		       " count %04x\n",
+		       rfd, SWAP16(rfd->stat), SWAP16(rfd->cmd),
+		       SWAP32(rfd->b_next), SWAP32(rfd->rbd),
+		       SWAP16(rfd->count));
+		rfd = rfd->v_next;
+	} while (rfd != lp->rfd_head);
+	rbd = lp->rbd_head;
+	printk(KERN_DEBUG "rbd_head = %p\n", rbd);
+	do {
+		printk(KERN_DEBUG
+		       "   %p .count %04x, b_next %08x, b_data %08x,"
+		       " size %04x\n",
+			rbd, SWAP16(rbd->count), SWAP32(rbd->b_next),
+		       SWAP32(rbd->b_data), SWAP16(rbd->size));
+		rbd = rbd->v_next;
+	} while (rbd != lp->rbd_head);
+	DMA_INV(dev, dma, sizeof(struct i596_dma));
+}
+
+
+#define virt_to_dma(lp, v) ((lp)->dma_addr + (dma_addr_t)((unsigned long)(v)-(unsigned long)((lp)->dma)))
+
+static inline int init_rx_bufs(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	int i;
+	struct i596_rfd *rfd;
+	struct i596_rbd *rbd;
+
+	/* First build the Receive Buffer Descriptor List */
+
+	for (i = 0, rbd = dma->rbds; i < rx_ring_size; i++, rbd++) {
+		dma_addr_t dma_addr;
+		struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+
+		if (skb == NULL)
+			return -1;
+		skb_reserve(skb, 2);
+		dma_addr = dma_map_single(dev->dev.parent, skb->data,
+					  PKT_BUF_SZ, DMA_FROM_DEVICE);
+		rbd->v_next = rbd+1;
+		rbd->b_next = SWAP32(virt_to_dma(lp, rbd+1));
+		rbd->b_addr = SWAP32(virt_to_dma(lp, rbd));
+		rbd->skb = skb;
+		rbd->v_data = skb->data;
+		rbd->b_data = SWAP32(dma_addr);
+		rbd->size = SWAP16(PKT_BUF_SZ);
+	}
+	lp->rbd_head = dma->rbds;
+	rbd = dma->rbds + rx_ring_size - 1;
+	rbd->v_next = dma->rbds;
+	rbd->b_next = SWAP32(virt_to_dma(lp, dma->rbds));
+
+	/* Now build the Receive Frame Descriptor List */
+
+	for (i = 0, rfd = dma->rfds; i < rx_ring_size; i++, rfd++) {
+		rfd->rbd = I596_NULL;
+		rfd->v_next = rfd+1;
+		rfd->v_prev = rfd-1;
+		rfd->b_next = SWAP32(virt_to_dma(lp, rfd+1));
+		rfd->cmd = SWAP16(CMD_FLEX);
+	}
+	lp->rfd_head = dma->rfds;
+	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
+	rfd = dma->rfds;
+	rfd->rbd = SWAP32(virt_to_dma(lp, lp->rbd_head));
+	rfd->v_prev = dma->rfds + rx_ring_size - 1;
+	rfd = dma->rfds + rx_ring_size - 1;
+	rfd->v_next = dma->rfds;
+	rfd->b_next = SWAP32(virt_to_dma(lp, dma->rfds));
+	rfd->cmd = SWAP16(CMD_EOL|CMD_FLEX);
+
+	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
+	return 0;
+}
+
+static inline void remove_rx_bufs(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_rbd *rbd;
+	int i;
+
+	for (i = 0, rbd = lp->dma->rbds; i < rx_ring_size; i++, rbd++) {
+		if (rbd->skb == NULL)
+			break;
+		dma_unmap_single(dev->dev.parent,
+				 (dma_addr_t)SWAP32(rbd->b_data),
+				 PKT_BUF_SZ, DMA_FROM_DEVICE);
+		dev_kfree_skb(rbd->skb);
+	}
+}
+
+
+static void rebuild_rx_bufs(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	int i;
+
+	/* Ensure rx frame/buffer descriptors are tidy */
+
+	for (i = 0; i < rx_ring_size; i++) {
+		dma->rfds[i].rbd = I596_NULL;
+		dma->rfds[i].cmd = SWAP16(CMD_FLEX);
+	}
+	dma->rfds[rx_ring_size-1].cmd = SWAP16(CMD_EOL|CMD_FLEX);
+	lp->rfd_head = dma->rfds;
+	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
+	lp->rbd_head = dma->rbds;
+	dma->rfds[0].rbd = SWAP32(virt_to_dma(lp, dma->rbds));
+
+	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
+}
+
+
+static int init_i596_mem(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	unsigned long flags;
+
+	mpu_port(dev, PORT_RESET, 0);
+	udelay(100);			/* Wait 100us - seems to help */
+
+	/* change the scp address */
+
+	lp->last_cmd = jiffies;
+
+	dma->scp.sysbus = SYSBUS;
+	dma->scp.iscp = SWAP32(virt_to_dma(lp, &(dma->iscp)));
+	dma->iscp.scb = SWAP32(virt_to_dma(lp, &(dma->scb)));
+	dma->iscp.stat = SWAP32(ISCP_BUSY);
+	lp->cmd_backlog = 0;
+
+	lp->cmd_head = NULL;
+	dma->scb.cmd = I596_NULL;
+
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
+
+	DMA_WBACK(dev, &(dma->scp), sizeof(struct i596_scp));
+	DMA_WBACK(dev, &(dma->iscp), sizeof(struct i596_iscp));
+	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+
+	mpu_port(dev, PORT_ALTSCP, virt_to_dma(lp, &dma->scp));
+	ca(dev);
+	if (wait_istat(dev, dma, 1000, "initialization timed out"))
+		goto failed;
+	DEB(DEB_INIT, printk(KERN_DEBUG
+			     "%s: i82596 initialization successful\n",
+			     dev->name));
+
+	if (request_irq(dev->irq, &i596_interrupt, 0, "i82596", dev)) {
+		printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
+		goto failed;
+	}
+
+	/* Ensure rx frame/buffer descriptors are tidy */
+	rebuild_rx_bufs(dev);
+
+	dma->scb.command = 0;
+	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+
+	DEB(DEB_INIT, printk(KERN_DEBUG
+			     "%s: queuing CmdConfigure\n", dev->name));
+	memcpy(dma->cf_cmd.i596_config, init_setup, 14);
+	dma->cf_cmd.cmd.command = SWAP16(CmdConfigure);
+	DMA_WBACK(dev, &(dma->cf_cmd), sizeof(struct cf_cmd));
+	i596_add_cmd(dev, &dma->cf_cmd.cmd);
+
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
+	memcpy(dma->sa_cmd.eth_addr, dev->dev_addr, 6);
+	dma->sa_cmd.cmd.command = SWAP16(CmdSASetup);
+	DMA_WBACK(dev, &(dma->sa_cmd), sizeof(struct sa_cmd));
+	i596_add_cmd(dev, &dma->sa_cmd.cmd);
+
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
+	dma->tdr_cmd.cmd.command = SWAP16(CmdTDR);
+	DMA_WBACK(dev, &(dma->tdr_cmd), sizeof(struct tdr_cmd));
+	i596_add_cmd(dev, &dma->tdr_cmd.cmd);
+
+	spin_lock_irqsave (&lp->lock, flags);
+
+	if (wait_cmd(dev, dma, 1000, "timed out waiting to issue RX_START")) {
+		spin_unlock_irqrestore (&lp->lock, flags);
+		goto failed_free_irq;
+	}
+	DEB(DEB_INIT, printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
+	dma->scb.command = SWAP16(RX_START);
+	dma->scb.rfd = SWAP32(virt_to_dma(lp, dma->rfds));
+	DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+
+	ca(dev);
+
+	spin_unlock_irqrestore (&lp->lock, flags);
+	if (wait_cmd(dev, dma, 1000, "RX_START not processed"))
+		goto failed_free_irq;
+	DEB(DEB_INIT, printk(KERN_DEBUG
+			     "%s: Receive unit started OK\n", dev->name));
+	return 0;
+
+failed_free_irq:
+	free_irq(dev->irq, dev);
+failed:
+	printk(KERN_ERR "%s: Failed to initialise 82596\n", dev->name);
+	mpu_port(dev, PORT_RESET, 0);
+	return -1;
+}
+
+
+static inline int i596_rx(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_rfd *rfd;
+	struct i596_rbd *rbd;
+	int frames = 0;
+
+	DEB(DEB_RXFRAME, printk(KERN_DEBUG
+				"i596_rx(), rfd_head %p, rbd_head %p\n",
+				lp->rfd_head, lp->rbd_head));
+
+
+	rfd = lp->rfd_head;		/* Ref next frame to check */
+
+	DMA_INV(dev, rfd, sizeof(struct i596_rfd));
+	while (rfd->stat & SWAP16(STAT_C)) {	/* Loop while complete frames */
+		if (rfd->rbd == I596_NULL)
+			rbd = NULL;
+		else if (rfd->rbd == lp->rbd_head->b_addr) {
+			rbd = lp->rbd_head;
+			DMA_INV(dev, rbd, sizeof(struct i596_rbd));
+		} else {
+			printk(KERN_ERR "%s: rbd chain broken!\n", dev->name);
+			/* XXX Now what? */
+			rbd = NULL;
+		}
+		DEB(DEB_RXFRAME, printk(KERN_DEBUG
+				      "  rfd %p, rfd.rbd %08x, rfd.stat %04x\n",
+				      rfd, rfd->rbd, rfd->stat));
+
+		if (rbd != NULL && (rfd->stat & SWAP16(STAT_OK))) {
+			/* a good frame */
+			int pkt_len = SWAP16(rbd->count) & 0x3fff;
+			struct sk_buff *skb = rbd->skb;
+			int rx_in_place = 0;
+
+			DEB(DEB_RXADDR, print_eth(rbd->v_data, "received"));
+			frames++;
+
+			/* Check if the packet is long enough to just accept
+			 * without copying to a properly sized skbuff.
+			 */
+
+			if (pkt_len > rx_copybreak) {
+				struct sk_buff *newskb;
+				dma_addr_t dma_addr;
+
+				dma_unmap_single(dev->dev.parent,
+						 (dma_addr_t)SWAP32(rbd->b_data),
+						 PKT_BUF_SZ, DMA_FROM_DEVICE);
+				/* Get fresh skbuff to replace filled one. */
+				newskb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+				if (newskb == NULL) {
+					skb = NULL;	/* drop pkt */
+					goto memory_squeeze;
+				}
+				skb_reserve(newskb, 2);
+
+				/* Pass up the skb already on the Rx ring. */
+				skb_put(skb, pkt_len);
+				rx_in_place = 1;
+				rbd->skb = newskb;
+				dma_addr = dma_map_single(dev->dev.parent,
+							  newskb->data,
+							  PKT_BUF_SZ,
+							  DMA_FROM_DEVICE);
+				rbd->v_data = newskb->data;
+				rbd->b_data = SWAP32(dma_addr);
+				DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
+			} else
+				skb = netdev_alloc_skb(dev, pkt_len + 2);
+memory_squeeze:
+			if (skb == NULL) {
+				/* XXX tulip.c can defer packets here!! */
+				printk(KERN_ERR
+				       "%s: i596_rx Memory squeeze, dropping packet.\n",
+				       dev->name);
+				lp->stats.rx_dropped++;
+			} else {
+				if (!rx_in_place) {
+					/* 16 byte align the data fields */
+					dma_sync_single_for_cpu(dev->dev.parent,
+								(dma_addr_t)SWAP32(rbd->b_data),
+								PKT_BUF_SZ, DMA_FROM_DEVICE);
+					skb_reserve(skb, 2);
+					memcpy(skb_put(skb, pkt_len), rbd->v_data, pkt_len);
+					dma_sync_single_for_device(dev->dev.parent,
+								   (dma_addr_t)SWAP32(rbd->b_data),
+								   PKT_BUF_SZ, DMA_FROM_DEVICE);
+				}
+				skb->len = pkt_len;
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->last_rx = jiffies;
+				lp->stats.rx_packets++;
+				lp->stats.rx_bytes += pkt_len;
+			}
+		} else {
+			DEB(DEB_ERRORS, printk(KERN_DEBUG
+					       "%s: Error, rfd.stat = 0x%04x\n",
+					       dev->name, rfd->stat));
+			lp->stats.rx_errors++;
+			if (rfd->stat & SWAP16(0x0100))
+				lp->stats.collisions++;
+			if (rfd->stat & SWAP16(0x8000))
+				lp->stats.rx_length_errors++;
+			if (rfd->stat & SWAP16(0x0001))
+				lp->stats.rx_over_errors++;
+			if (rfd->stat & SWAP16(0x0002))
+				lp->stats.rx_fifo_errors++;
+			if (rfd->stat & SWAP16(0x0004))
+				lp->stats.rx_frame_errors++;
+			if (rfd->stat & SWAP16(0x0008))
+				lp->stats.rx_crc_errors++;
+			if (rfd->stat & SWAP16(0x0010))
+				lp->stats.rx_length_errors++;
+		}
+
+		/* Clear the buffer descriptor count and EOF + F flags */
+
+		if (rbd != NULL && (rbd->count & SWAP16(0x4000))) {
+			rbd->count = 0;
+			lp->rbd_head = rbd->v_next;
+			DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
+		}
+
+		/* Tidy the frame descriptor, marking it as end of list */
+
+		rfd->rbd = I596_NULL;
+		rfd->stat = 0;
+		rfd->cmd = SWAP16(CMD_EOL|CMD_FLEX);
+		rfd->count = 0;
+
+		/* Update record of next frame descriptor to process */
+
+		lp->dma->scb.rfd = rfd->b_next;
+		lp->rfd_head = rfd->v_next;
+		DMA_WBACK_INV(dev, rfd, sizeof(struct i596_rfd));
+
+		/* Remove end-of-list from old end descriptor */
+
+		rfd->v_prev->cmd = SWAP16(CMD_FLEX);
+		DMA_WBACK_INV(dev, rfd->v_prev, sizeof(struct i596_rfd));
+		rfd = lp->rfd_head;
+		DMA_INV(dev, rfd, sizeof(struct i596_rfd));
+	}
+
+	DEB(DEB_RXFRAME, printk(KERN_DEBUG "frames %d\n", frames));
+
+	return 0;
+}
+
+
+static inline void i596_cleanup_cmd(struct net_device *dev, struct i596_private *lp)
+{
+	struct i596_cmd *ptr;
+
+	while (lp->cmd_head != NULL) {
+		ptr = lp->cmd_head;
+		lp->cmd_head = ptr->v_next;
+		lp->cmd_backlog--;
+
+		switch (SWAP16(ptr->command) & 0x7) {
+		case CmdTx:
+			{
+				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
+				struct sk_buff *skb = tx_cmd->skb;
+				dma_unmap_single(dev->dev.parent,
+						 tx_cmd->dma_addr,
+						 skb->len, DMA_TO_DEVICE);
+
+				dev_kfree_skb(skb);
+
+				lp->stats.tx_errors++;
+				lp->stats.tx_aborted_errors++;
+
+				ptr->v_next = NULL;
+				ptr->b_next = I596_NULL;
+				tx_cmd->cmd.command = 0;  /* Mark as free */
+				break;
+			}
+		default:
+			ptr->v_next = NULL;
+			ptr->b_next = I596_NULL;
+		}
+		DMA_WBACK_INV(dev, ptr, sizeof(struct i596_cmd));
+	}
+
+	wait_cmd(dev, lp->dma, 100, "i596_cleanup_cmd timed out");
+	lp->dma->scb.cmd = I596_NULL;
+	DMA_WBACK(dev, &(lp->dma->scb), sizeof(struct i596_scb));
+}
+
+
+static inline void i596_reset(struct net_device *dev, struct i596_private *lp)
+{
+	unsigned long flags;
+
+	DEB(DEB_RESET, printk(KERN_DEBUG "i596_reset\n"));
+
+	spin_lock_irqsave (&lp->lock, flags);
+
+	wait_cmd(dev, lp->dma, 100, "i596_reset timed out");
+
+	netif_stop_queue(dev);
+
+	/* FIXME: this command might cause an lpmc */
+	lp->dma->scb.command = SWAP16(CUC_ABORT | RX_ABORT);
+	DMA_WBACK(dev, &(lp->dma->scb), sizeof(struct i596_scb));
+	ca(dev);
+
+	/* wait for shutdown */
+	wait_cmd(dev, lp->dma, 1000, "i596_reset 2 timed out");
+	spin_unlock_irqrestore (&lp->lock, flags);
+
+	i596_cleanup_cmd(dev, lp);
+	i596_rx(dev);
+
+	netif_start_queue(dev);
+	init_i596_mem(dev);
+}
+
+
+static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	unsigned long flags;
+
+	DEB(DEB_ADDCMD, printk(KERN_DEBUG "i596_add_cmd cmd_head %p\n",
+			       lp->cmd_head));
+
+	cmd->status = 0;
+	cmd->command |= SWAP16(CMD_EOL | CMD_INTR);
+	cmd->v_next = NULL;
+	cmd->b_next = I596_NULL;
+	DMA_WBACK(dev, cmd, sizeof(struct i596_cmd));
+
+	spin_lock_irqsave (&lp->lock, flags);
+
+	if (lp->cmd_head != NULL) {
+		lp->cmd_tail->v_next = cmd;
+		lp->cmd_tail->b_next = SWAP32(virt_to_dma(lp, &cmd->status));
+		DMA_WBACK(dev, lp->cmd_tail, sizeof(struct i596_cmd));
+	} else {
+		lp->cmd_head = cmd;
+		wait_cmd(dev, dma, 100, "i596_add_cmd timed out");
+		dma->scb.cmd = SWAP32(virt_to_dma(lp, &cmd->status));
+		dma->scb.command = SWAP16(CUC_START);
+		DMA_WBACK(dev, &(dma->scb), sizeof(struct i596_scb));
+		ca(dev);
+	}
+	lp->cmd_tail = cmd;
+	lp->cmd_backlog++;
+
+	spin_unlock_irqrestore (&lp->lock, flags);
+
+	if (lp->cmd_backlog > max_cmd_backlog) {
+		unsigned long tickssofar = jiffies - lp->last_cmd;
+
+		if (tickssofar < ticks_limit)
+			return;
+
+		printk(KERN_ERR
+		       "%s: command unit timed out, status resetting.\n",
+		       dev->name);
+#if 1
+		i596_reset(dev, lp);
+#endif
+	}
+}
+
+static int i596_open(struct net_device *dev)
+{
+	DEB(DEB_OPEN, printk(KERN_DEBUG
+			     "%s: i596_open() irq %d.\n", dev->name, dev->irq));
+
+	if (init_rx_bufs(dev)) {
+		printk(KERN_ERR "%s: Failed to init rx bufs\n", dev->name);
+		return -EAGAIN;
+	}
+	if (init_i596_mem(dev)) {
+		printk(KERN_ERR "%s: Failed to init memory\n", dev->name);
+		goto out_remove_rx_bufs;
+	}
+	netif_start_queue(dev);
+
+	return 0;
+
+out_remove_rx_bufs:
+	remove_rx_bufs(dev);
+	return -EAGAIN;
+}
+
+static void i596_tx_timeout (struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+
+	/* Transmitter timeout, serious problems. */
+	DEB(DEB_ERRORS, printk(KERN_DEBUG
+			       "%s: transmit timed out, status resetting.\n",
+			       dev->name));
+
+	lp->stats.tx_errors++;
+
+	/* Try to restart the adaptor */
+	if (lp->last_restart == lp->stats.tx_packets) {
+		DEB(DEB_ERRORS, printk(KERN_DEBUG "Resetting board.\n"));
+		/* Shutdown and restart */
+		i596_reset (dev, lp);
+	} else {
+		/* Issue a channel attention signal */
+		DEB(DEB_ERRORS, printk(KERN_DEBUG "Kicking board.\n"));
+		lp->dma->scb.command = SWAP16(CUC_START | RX_START);
+		DMA_WBACK_INV(dev, &(lp->dma->scb), sizeof(struct i596_scb));
+		ca (dev);
+		lp->last_restart = lp->stats.tx_packets;
+	}
+
+	dev->trans_start = jiffies;
+	netif_wake_queue (dev);
+}
+
+
+static int i596_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct tx_cmd *tx_cmd;
+	struct i596_tbd *tbd;
+	short length = skb->len;
+	dev->trans_start = jiffies;
+
+	DEB(DEB_STARTTX, printk(KERN_DEBUG
+				"%s: i596_start_xmit(%x,%p) called\n",
+				dev->name, skb->len, skb->data));
+
+	if (length < ETH_ZLEN) {
+		if (skb_padto(skb, ETH_ZLEN))
+			return 0;
+		length = ETH_ZLEN;
+	}
+
+	netif_stop_queue(dev);
+
+	tx_cmd = lp->dma->tx_cmds + lp->next_tx_cmd;
+	tbd = lp->dma->tbds + lp->next_tx_cmd;
+
+	if (tx_cmd->cmd.command) {
+		DEB(DEB_ERRORS, printk(KERN_DEBUG
+				       "%s: xmit ring full, dropping packet.\n",
+				       dev->name));
+		lp->stats.tx_dropped++;
+
+		dev_kfree_skb(skb);
+	} else {
+		if (++lp->next_tx_cmd == TX_RING_SIZE)
+			lp->next_tx_cmd = 0;
+		tx_cmd->tbd = SWAP32(virt_to_dma(lp, tbd));
+		tbd->next = I596_NULL;
+
+		tx_cmd->cmd.command = SWAP16(CMD_FLEX | CmdTx);
+		tx_cmd->skb = skb;
+
+		tx_cmd->pad = 0;
+		tx_cmd->size = 0;
+		tbd->pad = 0;
+		tbd->size = SWAP16(EOF | length);
+
+		tx_cmd->dma_addr = dma_map_single(dev->dev.parent, skb->data,
+						  skb->len, DMA_TO_DEVICE);
+		tbd->data = SWAP32(tx_cmd->dma_addr);
+
+		DEB(DEB_TXADDR, print_eth(skb->data, "tx-queued"));
+		DMA_WBACK_INV(dev, tx_cmd, sizeof(struct tx_cmd));
+		DMA_WBACK_INV(dev, tbd, sizeof(struct i596_tbd));
+		i596_add_cmd(dev, &tx_cmd->cmd);
+
+		lp->stats.tx_packets++;
+		lp->stats.tx_bytes += length;
+	}
+
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+static void print_eth(unsigned char *add, char *str)
+{
+	int i;
+
+	printk(KERN_DEBUG "i596 0x%p, ", add);
+	for (i = 0; i < 6; i++)
+		printk(" %02X", add[i + 6]);
+	printk(" -->");
+	for (i = 0; i < 6; i++)
+		printk(" %02X", add[i]);
+	printk(" %02X%02X, %s\n", add[12], add[13], str);
+}
+
+static int __devinit i82596_probe(struct net_device *dev)
+{
+	int i;
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma;
+
+	/* This lot is ensure things have been cache line aligned. */
+	BUILD_BUG_ON(sizeof(struct i596_rfd) != 32);
+	BUILD_BUG_ON(sizeof(struct i596_rbd) &  31);
+	BUILD_BUG_ON(sizeof(struct tx_cmd)   &  31);
+	BUILD_BUG_ON(sizeof(struct i596_tbd) != 32);
+#ifndef __LP64__
+	BUILD_BUG_ON(sizeof(struct i596_dma) > 4096);
+#endif
+
+	if (!dev->base_addr || !dev->irq)
+		return -ENODEV;
+
+	dma = (struct i596_dma *) DMA_ALLOC(dev->dev.parent,
+		sizeof(struct i596_dma), &lp->dma_addr, GFP_KERNEL);
+	if (!dma) {
+		printk(KERN_ERR "%s: Couldn't get shared memory\n", __FILE__);
+		return -ENOMEM;
+	}
+
+	/* The 82596-specific entries in the device structure. */
+	dev->open = i596_open;
+	dev->stop = i596_close;
+	dev->hard_start_xmit = i596_start_xmit;
+	dev->get_stats = i596_get_stats;
+	dev->set_multicast_list = set_multicast_list;
+	dev->tx_timeout = i596_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = i596_poll_controller;
+#endif
+
+	memset(dma, 0, sizeof(struct i596_dma));
+	lp->dma = dma;
+
+	dma->scb.command = 0;
+	dma->scb.cmd = I596_NULL;
+	dma->scb.rfd = I596_NULL;
+	spin_lock_init(&lp->lock);
+
+	DMA_WBACK_INV(dev, dma, sizeof(struct i596_dma));
+
+	i = register_netdev(dev);
+	if (i) {
+		DMA_FREE(dev->dev.parent, sizeof(struct i596_dma),
+				    (void *)dma, lp->dma_addr);
+		return i;
+	};
+
+	DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx,",
+			      dev->name, dev->base_addr));
+	for (i = 0; i < 6; i++)
+		DEB(DEB_PROBE, printk(" %2.2X", dev->dev_addr[i]));
+	DEB(DEB_PROBE, printk(" IRQ %d.\n", dev->irq));
+	DEB(DEB_INIT, printk(KERN_INFO
+			     "%s: dma at 0x%p (%d bytes), lp->scb at 0x%p\n",
+			     dev->name, dma, (int)sizeof(struct i596_dma),
+			     &dma->scb));
+
+	return 0;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void i596_poll_controller(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	i596_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+static irqreturn_t i596_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	struct i596_private *lp;
+	struct i596_dma *dma;
+	unsigned short status, ack_cmd = 0;
+
+	if (dev == NULL) {
+		printk(KERN_WARNING "%s: irq %d for unknown device.\n",
+		       __FUNCTION__, irq);
+		return IRQ_NONE;
+	}
+
+	lp = netdev_priv(dev);
+	dma = lp->dma;
+
+	spin_lock (&lp->lock);
+
+	wait_cmd(dev, dma, 100, "i596 interrupt, timeout");
+	status = SWAP16(dma->scb.status);
+
+	DEB(DEB_INTS, printk(KERN_DEBUG
+			     "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
+			dev->name, irq, status));
+
+	ack_cmd = status & 0xf000;
+
+	if (!ack_cmd) {
+		DEB(DEB_ERRORS, printk(KERN_DEBUG
+				       "%s: interrupt with no events\n",
+				       dev->name));
+		spin_unlock (&lp->lock);
+		return IRQ_NONE;
+	}
+
+	if ((status & 0x8000) || (status & 0x2000)) {
+		struct i596_cmd *ptr;
+
+		if ((status & 0x8000))
+			DEB(DEB_INTS,
+			    printk(KERN_DEBUG
+				   "%s: i596 interrupt completed command.\n",
+				   dev->name));
+		if ((status & 0x2000))
+			DEB(DEB_INTS,
+			    printk(KERN_DEBUG
+				   "%s: i596 interrupt command unit inactive %x.\n",
+				   dev->name, status & 0x0700));
+
+		while (lp->cmd_head != NULL) {
+			DMA_INV(dev, lp->cmd_head, sizeof(struct i596_cmd));
+			if (!(lp->cmd_head->status & SWAP16(STAT_C)))
+				break;
+
+			ptr = lp->cmd_head;
+
+			DEB(DEB_STATUS,
+			    printk(KERN_DEBUG
+				   "cmd_head->status = %04x, ->command = %04x\n",
+				   SWAP16(lp->cmd_head->status),
+				   SWAP16(lp->cmd_head->command)));
+			lp->cmd_head = ptr->v_next;
+			lp->cmd_backlog--;
+
+			switch (SWAP16(ptr->command) & 0x7) {
+			case CmdTx:
+			    {
+				struct tx_cmd *tx_cmd = (struct tx_cmd *) ptr;
+				struct sk_buff *skb = tx_cmd->skb;
+
+				if (ptr->status & SWAP16(STAT_OK)) {
+					DEB(DEB_TXADDR,
+					    print_eth(skb->data, "tx-done"));
+				} else {
+					lp->stats.tx_errors++;
+					if (ptr->status & SWAP16(0x0020))
+						lp->stats.collisions++;
+					if (!(ptr->status & SWAP16(0x0040)))
+						lp->stats.tx_heartbeat_errors++;
+					if (ptr->status & SWAP16(0x0400))
+						lp->stats.tx_carrier_errors++;
+					if (ptr->status & SWAP16(0x0800))
+						lp->stats.collisions++;
+					if (ptr->status & SWAP16(0x1000))
+						lp->stats.tx_aborted_errors++;
+				}
+				dma_unmap_single(dev->dev.parent,
+						 tx_cmd->dma_addr,
+						 skb->len, DMA_TO_DEVICE);
+				dev_kfree_skb_irq(skb);
+
+				tx_cmd->cmd.command = 0; /* Mark free */
+				break;
+			    }
+			case CmdTDR:
+			    {
+				unsigned short status = SWAP16(((struct tdr_cmd *)ptr)->status);
+
+				if (status & 0x8000) {
+					DEB(DEB_ANY,
+					    printk(KERN_DEBUG "%s: link ok.\n",
+						   dev->name));
+				} else {
+					if (status & 0x4000)
+						printk(KERN_ERR
+						       "%s: Transceiver problem.\n",
+						       dev->name);
+					if (status & 0x2000)
+						printk(KERN_ERR
+						       "%s: Termination problem.\n",
+						       dev->name);
+					if (status & 0x1000)
+						printk(KERN_ERR
+						       "%s: Short circuit.\n",
+						       dev->name);
+
+					DEB(DEB_TDR,
+					    printk(KERN_DEBUG "%s: Time %d.\n",
+						   dev->name, status & 0x07ff));
+				}
+				break;
+			    }
+			case CmdConfigure:
+				/*
+				 * Zap command so set_multicast_list() know
+				 * it is free
+				 */
+				ptr->command = 0;
+				break;
+			}
+			ptr->v_next = NULL;
+			ptr->b_next = I596_NULL;
+			DMA_WBACK(dev, ptr, sizeof(struct i596_cmd));
+			lp->last_cmd = jiffies;
+		}
+
+		/* This mess is arranging that only the last of any outstanding
+		 * commands has the interrupt bit set.  Should probably really
+		 * only add to the cmd queue when the CU is stopped.
+		 */
+		ptr = lp->cmd_head;
+		while ((ptr != NULL) && (ptr != lp->cmd_tail)) {
+			struct i596_cmd *prev = ptr;
+
+			ptr->command &= SWAP16(0x1fff);
+			ptr = ptr->v_next;
+			DMA_WBACK_INV(dev, prev, sizeof(struct i596_cmd));
+		}
+
+		if (lp->cmd_head != NULL)
+			ack_cmd |= CUC_START;
+		dma->scb.cmd = SWAP32(virt_to_dma(lp, &lp->cmd_head->status));
+		DMA_WBACK_INV(dev, &dma->scb, sizeof(struct i596_scb));
+	}
+	if ((status & 0x1000) || (status & 0x4000)) {
+		if ((status & 0x4000))
+			DEB(DEB_INTS,
+			    printk(KERN_DEBUG
+				   "%s: i596 interrupt received a frame.\n",
+				   dev->name));
+		i596_rx(dev);
+		/* Only RX_START if stopped - RGH 07-07-96 */
+		if (status & 0x1000) {
+			if (netif_running(dev)) {
+				DEB(DEB_ERRORS,
+				    printk(KERN_DEBUG
+					   "%s: i596 interrupt receive unit inactive, status 0x%x\n",
+					   dev->name, status));
+				ack_cmd |= RX_START;
+				lp->stats.rx_errors++;
+				lp->stats.rx_fifo_errors++;
+				rebuild_rx_bufs(dev);
+			}
+		}
+	}
+	wait_cmd(dev, dma, 100, "i596 interrupt, timeout");
+	dma->scb.command = SWAP16(ack_cmd);
+	DMA_WBACK(dev, &dma->scb, sizeof(struct i596_scb));
+
+	/* DANGER: I suspect that some kind of interrupt
+	 acknowledgement aside from acking the 82596 might be needed
+	 here...  but it's running acceptably without */
+
+	ca(dev);
+
+	wait_cmd(dev, dma, 100, "i596 interrupt, exit timeout");
+	DEB(DEB_INTS, printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
+
+	spin_unlock (&lp->lock);
+	return IRQ_HANDLED;
+}
+
+static int i596_close(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	netif_stop_queue(dev);
+
+	DEB(DEB_INIT,
+	    printk(KERN_DEBUG
+		   "%s: Shutting down ethercard, status was %4.4x.\n",
+		   dev->name, SWAP16(lp->dma->scb.status)));
+
+	spin_lock_irqsave(&lp->lock, flags);
+
+	wait_cmd(dev, lp->dma, 100, "close1 timed out");
+	lp->dma->scb.command = SWAP16(CUC_ABORT | RX_ABORT);
+	DMA_WBACK(dev, &lp->dma->scb, sizeof(struct i596_scb));
+
+	ca(dev);
+
+	wait_cmd(dev, lp->dma, 100, "close2 timed out");
+	spin_unlock_irqrestore(&lp->lock, flags);
+	DEB(DEB_STRUCT, i596_display_data(dev));
+	i596_cleanup_cmd(dev, lp);
+
+	free_irq(dev->irq, dev);
+	remove_rx_bufs(dev);
+
+	return 0;
+}
+
+static struct net_device_stats *i596_get_stats(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+
+	return &lp->stats;
+}
+
+/*
+ *    Set or clear the multicast filter for this adaptor.
+ */
+
+static void set_multicast_list(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+	struct i596_dma *dma = lp->dma;
+	int config = 0, cnt;
+
+	DEB(DEB_MULTI,
+	    printk(KERN_DEBUG
+		   "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
+		   dev->name, dev->mc_count,
+		   dev->flags & IFF_PROMISC ? "ON" : "OFF",
+		   dev->flags & IFF_ALLMULTI ? "ON" : "OFF"));
+
+	if ((dev->flags & IFF_PROMISC) &&
+	    !(dma->cf_cmd.i596_config[8] & 0x01)) {
+		dma->cf_cmd.i596_config[8] |= 0x01;
+		config = 1;
+	}
+	if (!(dev->flags & IFF_PROMISC) &&
+	    (dma->cf_cmd.i596_config[8] & 0x01)) {
+		dma->cf_cmd.i596_config[8] &= ~0x01;
+		config = 1;
+	}
+	if ((dev->flags & IFF_ALLMULTI) &&
+	    (dma->cf_cmd.i596_config[11] & 0x20)) {
+		dma->cf_cmd.i596_config[11] &= ~0x20;
+		config = 1;
+	}
+	if (!(dev->flags & IFF_ALLMULTI) &&
+	    !(dma->cf_cmd.i596_config[11] & 0x20)) {
+		dma->cf_cmd.i596_config[11] |= 0x20;
+		config = 1;
+	}
+	if (config) {
+		if (dma->cf_cmd.cmd.command)
+			printk(KERN_INFO
+			       "%s: config change request already queued\n",
+			       dev->name);
+		else {
+			dma->cf_cmd.cmd.command = SWAP16(CmdConfigure);
+			DMA_WBACK_INV(dev, &dma->cf_cmd, sizeof(struct cf_cmd));
+			i596_add_cmd(dev, &dma->cf_cmd.cmd);
+		}
+	}
+
+	cnt = dev->mc_count;
+	if (cnt > MAX_MC_CNT) {
+		cnt = MAX_MC_CNT;
+		printk(KERN_NOTICE "%s: Only %d multicast addresses supported",
+			dev->name, cnt);
+	}
+
+	if (dev->mc_count > 0) {
+		struct dev_mc_list *dmi;
+		unsigned char *cp;
+		struct mc_cmd *cmd;
+
+		cmd = &dma->mc_cmd;
+		cmd->cmd.command = SWAP16(CmdMulticastList);
+		cmd->mc_cnt = SWAP16(dev->mc_count * 6);
+		cp = cmd->mc_addrs;
+		for (dmi = dev->mc_list;
+		     cnt && dmi != NULL;
+		     dmi = dmi->next, cnt--, cp += 6) {
+			memcpy(cp, dmi->dmi_addr, 6);
+			if (i596_debug > 1)
+				DEB(DEB_MULTI,
+				    printk(KERN_DEBUG
+					   "%s: Adding address %02x:%02x:%02x:%02x:%02x:%02x\n",
+					   dev->name, cp[0], cp[1], cp[2], cp[3], cp[4], cp[5]));
+		}
+		DMA_WBACK_INV(dev, &dma->mc_cmd, sizeof(struct mc_cmd));
+		i596_add_cmd(dev, &cmd->cmd);
+	}
+}
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index fef3193121f9..9a343b965975 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -577,7 +577,7 @@ static irqreturn_t mace_interrupt(int irq, void *dev_id)
 	struct mace_data *mp = netdev_priv(dev);
 	volatile struct mace *mb = mp->mace;
 	int intr, fs;
-	unsigned int flags;
+	unsigned long flags;
 
 	/* don't want the dma interrupt handler to fire */
 	local_irq_save(flags);
diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c
index 7f8b7d55b6e1..492cfaaaa75c 100644
--- a/drivers/net/mlx4/qp.c
+++ b/drivers/net/mlx4/qp.c
@@ -113,8 +113,7 @@ int mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt,
 	struct mlx4_cmd_mailbox *mailbox;
 	int ret = 0;
 
-	if (cur_state < 0 || cur_state >= MLX4_QP_NUM_STATE ||
-	    new_state < 0 || cur_state >= MLX4_QP_NUM_STATE ||
+	if (cur_state >= MLX4_QP_NUM_STATE || cur_state >= MLX4_QP_NUM_STATE ||
 	    !op[cur_state][new_state])
 		return -EINVAL;
 
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index d0cc122fa3f0..e1732c164a40 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -60,6 +60,7 @@
 #include <linux/crc32.h>
 #include <linux/moduleparam.h>
 #include <linux/io.h>
+#include <linux/log2.h>
 #include <net/checksum.h>
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -1804,7 +1805,7 @@ static int myri10ge_open(struct net_device *dev)
 	 */
 	big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
 	if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
-		while ((big_pow2 & (big_pow2 - 1)) != 0)
+		while (!is_power_of_2(big_pow2))
 			big_pow2++;
 		mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
 	} else {
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 460a08718c69..3450051ae56b 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2357,8 +2357,8 @@ static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do)
 					np->rx_dma[entry],
 					buflen,
 					PCI_DMA_FROMDEVICE);
-				eth_copy_and_sum(skb,
-					np->rx_skbuff[entry]->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb,
+					np->rx_skbuff[entry]->data, pkt_len);
 				skb_put(skb, pkt_len);
 				pci_dma_sync_single_for_device(np->pci_dev,
 					np->rx_dma[entry],
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 619503742b7d..325269d8ae38 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1097,109 +1097,6 @@ int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
 int netxen_nic_set_mac(struct net_device *netdev, void *p);
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
 
-static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
-{
-	uint32_t	mask = 0x7ff;
-	int retries = 32;
-
-	DPRINTK(1, INFO, "Entered ISR Disable \n");
-
-	switch (adapter->portnum) {
-	case 0:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
-		break;
-	case 1:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
-		break;
-	case 2:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
-		break;
-	case 3:
-		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
-		break;
-	}
-
-	if (adapter->intr_scheme != -1 &&
-		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-		writel(mask,
-			(void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
-	}
-
-	/* Window = 0 or 1 */
-	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
-		do {
-			writel(0xffffffff, (void *)
-				(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS)));
-			mask = readl((void *)
-					(pci_base_offset(adapter, ISR_INT_VECTOR)));
-			if (!(mask & 0x80))
-				break;
-			udelay(10);
-		} while (--retries);
-
-		if (!retries) {
-			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
-					netxen_nic_driver_name);
-		}
-	}
-
-	DPRINTK(1, INFO, "Done with Disable Int\n");
-
-	return;
-}
-
-static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
-{
-	u32 mask;
-
-	DPRINTK(1, INFO, "Entered ISR Enable \n");
-
-	if (adapter->intr_scheme != -1 &&
-		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-		switch (adapter->ahw.board_type) {
-		case NETXEN_NIC_GBE:
-			mask  =  0x77b;
-			break;
-		case NETXEN_NIC_XGBE:
-			mask  =  0x77f;
-			break;
-		default:
-			mask  =  0x7ff;
-			break;
-		}
-
-		writel(mask,
-			(void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK)));
-	}
-	switch (adapter->portnum) {
-	case 0:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
-		break;
-	case 1:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
-		break;
-	case 2:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
-		break;
-	case 3:
-		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
-		break;
-	}
-
-	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
-		mask = 0xbff;
-		if (adapter->intr_scheme != -1 &&
-			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-			writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
-		}
-		writel(mask,
-			(void *)(PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK)));
-	}
-
-	DPRINTK(1, INFO, "Done with enable Int\n");
-
-	return;
-}
 
 /*
  * NetXen Board information
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index a66ff58366cf..b703ccfe040b 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -54,8 +54,6 @@ static char netxen_nic_driver_string[] = "NetXen Network Driver version "
 #define NETXEN_ADAPTER_UP_MAGIC 777
 #define NETXEN_NIC_PEG_TUNE 0
 
-u8 nx_p2_id = NX_P2_C0;
-
 #define DMA_32BIT_MASK	0x00000000ffffffffULL
 #define DMA_35BIT_MASK	0x00000007ffffffffULL
 
@@ -156,6 +154,103 @@ static inline void netxen_nic_update_cmd_consumer(struct netxen_adapter *adapter
 #define	ADAPTER_LIST_SIZE 12
 int netxen_cards_found;
 
+static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+{
+	uint32_t	mask = 0x7ff;
+	int retries = 32;
+
+	DPRINTK(1, INFO, "Entered ISR Disable \n");
+
+	switch (adapter->portnum) {
+	case 0:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+		break;
+	case 1:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+		break;
+	case 2:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+		break;
+	case 3:
+		writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+		break;
+	}
+
+	if (adapter->intr_scheme != -1 &&
+	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
+		writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+
+	/* Window = 0 or 1 */
+	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+		do {
+			writel(0xffffffff,
+			       PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_STATUS));
+			mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
+			if (!(mask & 0x80))
+				break;
+			udelay(10);
+		} while (--retries);
+
+		if (!retries) {
+			printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
+					netxen_nic_driver_name);
+		}
+	}
+
+	DPRINTK(1, INFO, "Done with Disable Int\n");
+}
+
+static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+{
+	u32 mask;
+
+	DPRINTK(1, INFO, "Entered ISR Enable \n");
+
+	if (adapter->intr_scheme != -1 &&
+		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+		switch (adapter->ahw.board_type) {
+		case NETXEN_NIC_GBE:
+			mask  =  0x77b;
+			break;
+		case NETXEN_NIC_XGBE:
+			mask  =  0x77f;
+			break;
+		default:
+			mask  =  0x7ff;
+			break;
+		}
+
+		writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
+	}
+
+	switch (adapter->portnum) {
+	case 0:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
+		break;
+	case 1:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
+		break;
+	case 2:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
+		break;
+	case 3:
+		writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
+		break;
+	}
+
+	if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
+		mask = 0xbff;
+		if (adapter->intr_scheme != -1 &&
+			adapter->intr_scheme != INTR_SCHEME_PERPORT) {
+			writel(0X0, NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+		}
+		writel(mask,
+		       PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK));
+	}
+
+	DPRINTK(1, INFO, "Done with enable Int\n");
+}
+
 /*
  * netxen_nic_probe()
  *
@@ -210,8 +305,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_disable_pdev;
 
 	pci_set_master(pdev);
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &nx_p2_id);
-	if (nx_p2_id == NX_P2_C1 &&
+	if (pdev->revision == NX_P2_C1 &&
 	    (pci_set_dma_mask(pdev, DMA_35BIT_MASK) == 0) &&
 	    (pci_set_consistent_dma_mask(pdev, DMA_35BIT_MASK) == 0)) {
 		pci_using_dac = 1;
@@ -455,7 +549,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
 	adapter->ahw.pdev = pdev;
 	adapter->proc_cmd_buf_counter = 0;
-	adapter->ahw.revision_id = nx_p2_id;
+	adapter->ahw.revision_id = pdev->revision;
 
 	/* make sure Window == 1 */
 	netxen_nic_pci_change_crbwindow(adapter, 1);
diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c
index 75102d30730f..05e0577a0e10 100644
--- a/drivers/net/netxen/netxen_nic_niu.c
+++ b/drivers/net/netxen/netxen_nic_niu.c
@@ -724,7 +724,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter)
 	__u32 mac_cfg0;
 	u32 port = physical_port[adapter->portnum];
 
-	if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
+	if (port > NETXEN_NIU_MAX_GBE_PORTS)
 		return -EINVAL;
 	mac_cfg0 = 0;
 	netxen_gb_soft_reset(mac_cfg0);
@@ -757,7 +757,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
 	__u32 reg;
 	u32 port = physical_port[adapter->portnum];
 
-	if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
+	if (port > NETXEN_NIU_MAX_GBE_PORTS)
 		return -EINVAL;
 
 	/* save previous contents */
@@ -894,7 +894,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
 	__u32 reg;
 	u32 port = physical_port[adapter->portnum];
 
-	if ((port < 0) || (port > NETXEN_NIU_MAX_XG_PORTS))
+	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
 	if (netxen_nic_hw_read_wx(adapter,
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index 8dbd6d1900b5..5e7999db2096 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -936,7 +936,7 @@ static void ni52_rcv_int(struct net_device *dev)
 					{
 						skb_reserve(skb,2);
 						skb_put(skb,totlen);
-						eth_copy_and_sum(skb,(char *) p->base+(unsigned long) rbd->buffer,totlen,0);
+						skb_copy_to_linear_data(skb,(char *) p->base+(unsigned long) rbd->buffer,totlen);
 						skb->protocol=eth_type_trans(skb,dev);
 						netif_rx(skb);
 						dev->last_rx = jiffies;
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 3818edf0ac18..4ef5fe345191 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -1096,7 +1096,7 @@ static void ni65_recv_intr(struct net_device *dev,int csr0)
 #ifdef RCV_VIA_SKB
 				if( (unsigned long) (skb->data + R_BUF_SIZE) > 0x1000000) {
 					skb_put(skb,len);
-					eth_copy_and_sum(skb, (unsigned char *)(p->recv_skb[p->rmdnum]->data),len,0);
+					skb_copy_to_linear_data(skb, (unsigned char *)(p->recv_skb[p->rmdnum]->data),len);
 				}
 				else {
 					struct sk_buff *skb1 = p->recv_skb[p->rmdnum];
@@ -1108,7 +1108,7 @@ static void ni65_recv_intr(struct net_device *dev,int csr0)
 				}
 #else
 				skb_put(skb,len);
-				eth_copy_and_sum(skb, (unsigned char *) p->recvbounce[p->rmdnum],len,0);
+				skb_copy_to_linear_data(skb, (unsigned char *) p->recvbounce[p->rmdnum],len);
 #endif
 				p->stats.rx_packets++;
 				p->stats.rx_bytes += len;
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 8d38425e46c3..0b3066a6fe40 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -755,7 +755,7 @@ static int pasemi_mac_open(struct net_device *dev)
 	flags |= PAS_MAC_CFG_PCFG_TSR_1G | PAS_MAC_CFG_PCFG_SPD_1G;
 
 	pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_RXCH_CFG(mac->dma_rxch),
-			       PAS_IOB_DMA_RXCH_CFG_CNTTH(1));
+			       PAS_IOB_DMA_RXCH_CFG_CNTTH(0));
 
 	pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_CFG(mac->dma_txch),
 			       PAS_IOB_DMA_TXCH_CFG_CNTTH(32));
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index df8998b4f37e..3cdbe118200b 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1567,7 +1567,7 @@ static void netdrv_rx_interrupt (struct net_device *dev,
 		if (skb) {
 			skb_reserve (skb, 2);	/* 16 byte align the IP fields. */
 
-			eth_copy_and_sum (skb, &rx_ring[ring_offset + 4], pkt_size, 0);
+			skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
 			skb_put (skb, pkt_size);
 
 			skb->protocol = eth_type_trans (skb, dev);
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 808fae1577e0..50dff1b81d34 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -521,6 +521,7 @@ static void mdio_write(kio_addr_t addr, int phy_id, int loc, int value)
 
 static int axnet_open(struct net_device *dev)
 {
+    int ret;
     axnet_dev_t *info = PRIV(dev);
     struct pcmcia_device *link = info->p_dev;
     
@@ -529,9 +530,11 @@ static int axnet_open(struct net_device *dev)
     if (!pcmcia_dev_present(link))
 	return -ENODEV;
 
-    link->open++;
+    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev);
+    if (ret)
+	    return ret;
 
-    request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev);
+    link->open++;
 
     info->link_status = 0x00;
     init_timer(&info->watchdog);
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 3f93d4933235..85d5f2ca4bb5 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -109,7 +109,7 @@ static const struct ethtool_ops netdev_ethtool_ops;
     card type
  */
 typedef enum { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN, 
-	       XXX10304
+	       XXX10304, NEC, KME
 } cardtype_t;
 
 /*
@@ -374,6 +374,18 @@ static int fmvj18x_config(struct pcmcia_device *link)
 		link->io.NumPorts2 = 8;
 	    }
 	    break;
+	case MANFID_NEC:
+	    cardtype = NEC; /* MultiFunction Card */
+	    link->conf.ConfigBase = 0x800;
+	    link->conf.ConfigIndex = 0x47;
+	    link->io.NumPorts2 = 8;
+	    break;
+	case MANFID_KME:
+	    cardtype = KME; /* MultiFunction Card */
+	    link->conf.ConfigBase = 0x800;
+	    link->conf.ConfigIndex = 0x47;
+	    link->io.NumPorts2 = 8;
+	    break;
 	case MANFID_CONTEC:
 	    cardtype = CONTEC;
 	    break;
@@ -450,6 +462,8 @@ static int fmvj18x_config(struct pcmcia_device *link)
     case TDK:
     case LA501:
     case CONTEC:
+    case NEC:
+    case KME:
 	tuple.DesiredTuple = CISTPL_FUNCE;
 	tuple.TupleOffset = 0;
 	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -469,6 +483,10 @@ static int fmvj18x_config(struct pcmcia_device *link)
 		card_name = "TDK LAK-CD021";
 	    } else if( cardtype == LA501 ) {
 		card_name = "LA501";
+	    } else if( cardtype == NEC ) {
+		card_name = "PK-UG-J001";
+	    } else if( cardtype == KME ) {
+		card_name = "Panasonic";
 	    } else {
 		card_name = "C-NET(PC)C";
 	    }
@@ -678,8 +696,11 @@ static struct pcmcia_device_id fmvj18x_ids[] = {
 	PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
 	PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index d88e9b2e93cf..63de89e93b70 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -960,6 +960,7 @@ static void mii_phy_probe(struct net_device *dev)
 
 static int pcnet_open(struct net_device *dev)
 {
+    int ret;
     pcnet_dev_t *info = PRIV(dev);
     struct pcmcia_device *link = info->p_dev;
 
@@ -968,10 +969,12 @@ static int pcnet_open(struct net_device *dev)
     if (!pcmcia_dev_present(link))
 	return -ENODEV;
 
-    link->open++;
-
     set_misc_reg(dev);
-    request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
+    ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev);
+    if (ret)
+	    return ret;
+
+    link->open++;
 
     info->phy_id = info->eth_phy;
     info->link_status = 0x00;
@@ -1552,6 +1555,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 	PCMCIA_MFC_DEVICE_PROD_ID12(0, "IBM", "Home and Away 28.8 PC Card       ", 0xb569a6e5, 0x5bd4ff2c),
@@ -1577,6 +1581,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1103),
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1121),
 	PCMCIA_DEVICE_PROD_ID12("2408LAN", "Ethernet", 0x352fff7f, 0x00b2e941),
+	PCMCIA_DEVICE_PROD_ID1234("Socket", "CF 10/100 Ethernet Card", "Revision B", "05/11/06", 0xb38bcc2e, 0x4de88352, 0xeaca6c8d, 0x7e57c22e),
 	PCMCIA_DEVICE_PROD_ID123("Cardwell", "PCMCIA", "ETHERNET", 0x9533672e, 0x281f1c5d, 0x3ff7175b),
 	PCMCIA_DEVICE_PROD_ID123("CNet  ", "CN30BC", "ETHERNET", 0x9fe55d3d, 0x85601198, 0x3ff7175b),
 	PCMCIA_DEVICE_PROD_ID123("Digital", "Ethernet", "Adapter", 0x9999ab35, 0x00b2e941, 0x4b0d829e),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 9c171a7390e2..465485a3fbc6 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1235,9 +1235,9 @@ static void pcnet32_rx_entry(struct net_device *dev,
 					    lp->rx_dma_addr[entry],
 					    pkt_len,
 					    PCI_DMA_FROMDEVICE);
-		eth_copy_and_sum(skb,
+		skb_copy_to_linear_data(skb,
 				 (unsigned char *)(lp->rx_skbuff[entry]->data),
-				 pkt_len, 0);
+				 pkt_len);
 		pci_dma_sync_single_for_device(lp->pci_dev,
 					       lp->rx_dma_addr[entry],
 					       pkt_len,
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 09b6f259eb92..dd09011c7ee5 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -55,6 +55,11 @@ config BROADCOM_PHY
 	---help---
 	  Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
 
+config ICPLUS_PHY
+	tristate "Drivers for ICPlus PHYs"
+	---help---
+	  Currently supports the IP175C PHY.
+
 config FIXED_PHY
 	tristate "Drivers for PHY emulation on fixed speed/link"
 	---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index bcd1efbd2a18..8885650647ff 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -11,4 +11,5 @@ obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
 obj-$(CONFIG_SMSC_PHY)		+= smsc.o
 obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
 obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
+obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
 obj-$(CONFIG_FIXED_PHY)		+= fixed.o
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
new file mode 100644
index 000000000000..af3f1f2a9f87
--- /dev/null
+++ b/drivers/net/phy/icplus.c
@@ -0,0 +1,134 @@
+/*
+ * Driver for ICPlus PHYs
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
+MODULE_AUTHOR("Michael Barkowski");
+MODULE_LICENSE("GPL");
+
+static int ip175c_config_init(struct phy_device *phydev)
+{
+	int err, i;
+	static int full_reset_performed = 0;
+
+	if (full_reset_performed == 0) {
+
+		/* master reset */
+		err = phydev->bus->write(phydev->bus, 30, 0, 0x175c);
+		if (err < 0)
+			return err;
+
+		/* ensure no bus delays overlap reset period */
+		err = phydev->bus->read(phydev->bus, 30, 0);
+
+		/* data sheet specifies reset period is 2 msec */
+		mdelay(2);
+
+		/* enable IP175C mode */
+		err = phydev->bus->write(phydev->bus, 29, 31, 0x175c);
+		if (err < 0)
+			return err;
+
+		/* Set MII0 speed and duplex (in PHY mode) */
+		err = phydev->bus->write(phydev->bus, 29, 22, 0x420);
+		if (err < 0)
+			return err;
+
+		/* reset switch ports */
+		for (i = 0; i < 5; i++) {
+			err = phydev->bus->write(phydev->bus, i,
+						 MII_BMCR, BMCR_RESET);
+			if (err < 0)
+				return err;
+		}
+
+		for (i = 0; i < 5; i++)
+			err = phydev->bus->read(phydev->bus, i, MII_BMCR);
+
+		mdelay(2);
+
+		full_reset_performed = 1;
+	}
+
+	if (phydev->addr != 4) {
+		phydev->state = PHY_RUNNING;
+		phydev->speed = SPEED_100;
+		phydev->duplex = DUPLEX_FULL;
+		phydev->link = 1;
+		netif_carrier_on(phydev->attached_dev);
+	}
+
+	return 0;
+}
+
+static int ip175c_read_status(struct phy_device *phydev)
+{
+	if (phydev->addr == 4) /* WAN port */
+		genphy_read_status(phydev);
+	else
+		/* Don't need to read status for switch ports */
+		phydev->irq = PHY_IGNORE_INTERRUPT;
+
+	return 0;
+}
+
+static int ip175c_config_aneg(struct phy_device *phydev)
+{
+	if (phydev->addr == 4) /* WAN port */
+		genphy_config_aneg(phydev);
+
+	return 0;
+}
+
+static struct phy_driver ip175c_driver = {
+	.phy_id		= 0x02430d80,
+	.name		= "ICPlus IP175C",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.config_init	= &ip175c_config_init,
+	.config_aneg	= &ip175c_config_aneg,
+	.read_status	= &ip175c_read_status,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static int __init ip175c_init(void)
+{
+	return phy_driver_register(&ip175c_driver);
+}
+
+static void __exit ip175c_exit(void)
+{
+	phy_driver_unregister(&ip175c_driver);
+}
+
+module_init(ip175c_init);
+module_exit(ip175c_exit);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index b87f8d2a888b..d2ede5ff9fff 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -60,6 +60,7 @@
 #define MII_M1111_PHY_EXT_SR		0x1b
 #define MII_M1111_HWCFG_MODE_MASK	0xf
 #define MII_M1111_HWCFG_MODE_RGMII	0xb
+#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK	0x4
 
 MODULE_DESCRIPTION("Marvell PHY driver");
 MODULE_AUTHOR("Andy Fleming");
@@ -169,6 +170,21 @@ static int m88e1111_config_init(struct phy_device *phydev)
 			return err;
 	}
 
+	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		int temp;
+
+		temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+		if (temp < 0)
+			return temp;
+
+		temp &= ~(MII_M1111_HWCFG_MODE_MASK);
+		temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
+
+		err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+		if (err < 0)
+			return err;
+	}
+
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
 		return err;
@@ -238,77 +254,84 @@ static int m88e1145_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static struct phy_driver m88e1101_driver = {
-	.phy_id = 0x01410c60,
-	.phy_id_mask = 0xfffffff0,
-	.name = "Marvell 88E1101",
-	.features = PHY_GBIT_FEATURES,
-	.flags = PHY_HAS_INTERRUPT,
-	.config_aneg = &marvell_config_aneg,
-	.read_status = &genphy_read_status,
-	.ack_interrupt = &marvell_ack_interrupt,
-	.config_intr = &marvell_config_intr,
-	.driver = {.owner = THIS_MODULE,},
-};
-
-static struct phy_driver m88e1111_driver = {
-	.phy_id = 0x01410cc0,
-	.phy_id_mask = 0xfffffff0,
-	.name = "Marvell 88E1111",
-	.features = PHY_GBIT_FEATURES,
-	.flags = PHY_HAS_INTERRUPT,
-	.config_aneg = &marvell_config_aneg,
-	.read_status = &genphy_read_status,
-	.ack_interrupt = &marvell_ack_interrupt,
-	.config_intr = &marvell_config_intr,
-	.config_init = &m88e1111_config_init,
-	.driver = {.owner = THIS_MODULE,},
-};
-
-static struct phy_driver m88e1145_driver = {
-	.phy_id = 0x01410cd0,
-	.phy_id_mask = 0xfffffff0,
-	.name = "Marvell 88E1145",
-	.features = PHY_GBIT_FEATURES,
-	.flags = PHY_HAS_INTERRUPT,
-	.config_init = &m88e1145_config_init,
-	.config_aneg = &marvell_config_aneg,
-	.read_status = &genphy_read_status,
-	.ack_interrupt = &marvell_ack_interrupt,
-	.config_intr = &marvell_config_intr,
-	.driver = {.owner = THIS_MODULE,},
+static struct phy_driver marvell_drivers[] = {
+	{
+		.phy_id = 0x01410c60,
+		.phy_id_mask = 0xfffffff0,
+		.name = "Marvell 88E1101",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_aneg = &marvell_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = {.owner = THIS_MODULE,},
+	},
+	{
+		.phy_id = 0x01410c90,
+		.phy_id_mask = 0xfffffff0,
+		.name = "Marvell 88E1112",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1111_config_init,
+		.config_aneg = &marvell_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = {.owner = THIS_MODULE,},
+	},
+	{
+		.phy_id = 0x01410cc0,
+		.phy_id_mask = 0xfffffff0,
+		.name = "Marvell 88E1111",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1111_config_init,
+		.config_aneg = &marvell_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = {.owner = THIS_MODULE,},
+	},
+	{
+		.phy_id = 0x01410cd0,
+		.phy_id_mask = 0xfffffff0,
+		.name = "Marvell 88E1145",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1145_config_init,
+		.config_aneg = &marvell_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = {.owner = THIS_MODULE,},
+	}
 };
 
 static int __init marvell_init(void)
 {
 	int ret;
+	int i;
 
-	ret = phy_driver_register(&m88e1101_driver);
-	if (ret)
-		return ret;
+	for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++) {
+		ret = phy_driver_register(&marvell_drivers[i]);
 
-	ret = phy_driver_register(&m88e1111_driver);
-	if (ret)
-		goto err1111;
-
-	ret = phy_driver_register(&m88e1145_driver);
-	if (ret)
-		goto err1145;
+		if (ret) {
+			while (i-- > 0)
+				phy_driver_unregister(&marvell_drivers[i]);
+			return ret;
+		}
+	}
 
 	return 0;
-
-err1145:
-	phy_driver_unregister(&m88e1111_driver);
-err1111:
-	phy_driver_unregister(&m88e1101_driver);
-	return ret;
 }
 
 static void __exit marvell_exit(void)
 {
-	phy_driver_unregister(&m88e1101_driver);
-	phy_driver_unregister(&m88e1111_driver);
-	phy_driver_unregister(&m88e1145_driver);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(marvell_drivers); i++)
+		phy_driver_unregister(&marvell_drivers[i]);
 }
 
 module_init(marvell_init);
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
new file mode 100644
index 000000000000..5891a0fbdc8b
--- /dev/null
+++ b/drivers/net/pppol2tp.c
@@ -0,0 +1,2486 @@
+/*****************************************************************************
+ * Linux PPP over L2TP (PPPoX/PPPoL2TP) Sockets
+ *
+ * PPPoX    --- Generic PPP encapsulation socket family
+ * PPPoL2TP --- PPP over L2TP (RFC 2661)
+ *
+ * Version:	1.0.0
+ *
+ * Authors:	Martijn van Oosterhout <kleptog@svana.org>
+ *		James Chapman (jchapman@katalix.com)
+ * Contributors:
+ *		Michal Ostrowski <mostrows@speakeasy.net>
+ *		Arnaldo Carvalho de Melo <acme@xconectiva.com.br>
+ *		David S. Miller (davem@redhat.com)
+ *
+ * License:
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This driver handles only L2TP data frames; control frames are handled by a
+ * userspace application.
+ *
+ * To send data in an L2TP session, userspace opens a PPPoL2TP socket and
+ * attaches it to a bound UDP socket with local tunnel_id / session_id and
+ * peer tunnel_id / session_id set. Data can then be sent or received using
+ * regular socket sendmsg() / recvmsg() calls. Kernel parameters of the socket
+ * can be read or modified using ioctl() or [gs]etsockopt() calls.
+ *
+ * When a PPPoL2TP socket is connected with local and peer session_id values
+ * zero, the socket is treated as a special tunnel management socket.
+ *
+ * Here's example userspace code to create a socket for sending/receiving data
+ * over an L2TP session:-
+ *
+ *	struct sockaddr_pppol2tp sax;
+ *	int fd;
+ *	int session_fd;
+ *
+ *	fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
+ *
+ *	sax.sa_family = AF_PPPOX;
+ *	sax.sa_protocol = PX_PROTO_OL2TP;
+ *	sax.pppol2tp.fd = tunnel_fd;	// bound UDP socket
+ *	sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
+ *	sax.pppol2tp.addr.sin_port = addr->sin_port;
+ *	sax.pppol2tp.addr.sin_family = AF_INET;
+ *	sax.pppol2tp.s_tunnel  = tunnel_id;
+ *	sax.pppol2tp.s_session = session_id;
+ *	sax.pppol2tp.d_tunnel  = peer_tunnel_id;
+ *	sax.pppol2tp.d_session = peer_session_id;
+ *
+ *	session_fd = connect(fd, (struct sockaddr *)&sax, sizeof(sax));
+ *
+ * A pppd plugin that allows PPP traffic to be carried over L2TP using
+ * this driver is available from the OpenL2TP project at
+ * http://openl2tp.sourceforge.net.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+
+#include <linux/netdevice.h>
+#include <linux/net.h>
+#include <linux/inetdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/ip.h>
+#include <linux/udp.h>
+#include <linux/if_pppox.h>
+#include <linux/if_pppol2tp.h>
+#include <net/sock.h>
+#include <linux/ppp_channel.h>
+#include <linux/ppp_defs.h>
+#include <linux/if_ppp.h>
+#include <linux/file.h>
+#include <linux/hash.h>
+#include <linux/sort.h>
+#include <linux/proc_fs.h>
+#include <net/dst.h>
+#include <net/ip.h>
+#include <net/udp.h>
+#include <net/xfrm.h>
+
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+
+
+#define PPPOL2TP_DRV_VERSION	"V1.0"
+
+/* L2TP header constants */
+#define L2TP_HDRFLAG_T	   0x8000
+#define L2TP_HDRFLAG_L	   0x4000
+#define L2TP_HDRFLAG_S	   0x0800
+#define L2TP_HDRFLAG_O	   0x0200
+#define L2TP_HDRFLAG_P	   0x0100
+
+#define L2TP_HDR_VER_MASK  0x000F
+#define L2TP_HDR_VER	   0x0002
+
+/* Space for UDP, L2TP and PPP headers */
+#define PPPOL2TP_HEADER_OVERHEAD	40
+
+/* Just some random numbers */
+#define L2TP_TUNNEL_MAGIC	0x42114DDA
+#define L2TP_SESSION_MAGIC	0x0C04EB7D
+
+#define PPPOL2TP_HASH_BITS	4
+#define PPPOL2TP_HASH_SIZE	(1 << PPPOL2TP_HASH_BITS)
+
+/* Default trace flags */
+#define PPPOL2TP_DEFAULT_DEBUG_FLAGS	0
+
+#define PRINTK(_mask, _type, _lvl, _fmt, args...)			\
+	do {								\
+		if ((_mask) & (_type))					\
+			printk(_lvl "PPPOL2TP: " _fmt, ##args);		\
+	} while(0)
+
+/* Number of bytes to build transmit L2TP headers.
+ * Unfortunately the size is different depending on whether sequence numbers
+ * are enabled.
+ */
+#define PPPOL2TP_L2TP_HDR_SIZE_SEQ		10
+#define PPPOL2TP_L2TP_HDR_SIZE_NOSEQ		6
+
+struct pppol2tp_tunnel;
+
+/* Describes a session. It is the sk_user_data field in the PPPoL2TP
+ * socket. Contains information to determine incoming packets and transmit
+ * outgoing ones.
+ */
+struct pppol2tp_session
+{
+	int			magic;		/* should be
+						 * L2TP_SESSION_MAGIC */
+	int			owner;		/* pid that opened the socket */
+
+	struct sock		*sock;		/* Pointer to the session
+						 * PPPoX socket */
+	struct sock		*tunnel_sock;	/* Pointer to the tunnel UDP
+						 * socket */
+
+	struct pppol2tp_addr	tunnel_addr;	/* Description of tunnel */
+
+	struct pppol2tp_tunnel	*tunnel;	/* back pointer to tunnel
+						 * context */
+
+	char			name[20];	/* "sess xxxxx/yyyyy", where
+						 * x=tunnel_id, y=session_id */
+	int			mtu;
+	int			mru;
+	int			flags;		/* accessed by PPPIOCGFLAGS.
+						 * Unused. */
+	unsigned		recv_seq:1;	/* expect receive packets with
+						 * sequence numbers? */
+	unsigned		send_seq:1;	/* send packets with sequence
+						 * numbers? */
+	unsigned		lns_mode:1;	/* behave as LNS? LAC enables
+						 * sequence numbers under
+						 * control of LNS. */
+	int			debug;		/* bitmask of debug message
+						 * categories */
+	int			reorder_timeout; /* configured reorder timeout
+						  * (in jiffies) */
+	u16			nr;		/* session NR state (receive) */
+	u16			ns;		/* session NR state (send) */
+	struct sk_buff_head	reorder_q;	/* receive reorder queue */
+	struct pppol2tp_ioc_stats stats;
+	struct hlist_node	hlist;		/* Hash list node */
+};
+
+/* The sk_user_data field of the tunnel's UDP socket. It contains info to track
+ * all the associated sessions so incoming packets can be sorted out
+ */
+struct pppol2tp_tunnel
+{
+	int			magic;		/* Should be L2TP_TUNNEL_MAGIC */
+	rwlock_t		hlist_lock;	/* protect session_hlist */
+	struct hlist_head	session_hlist[PPPOL2TP_HASH_SIZE];
+						/* hashed list of sessions,
+						 * hashed by id */
+	int			debug;		/* bitmask of debug message
+						 * categories */
+	char			name[12];	/* "tunl xxxxx" */
+	struct pppol2tp_ioc_stats stats;
+
+	void (*old_sk_destruct)(struct sock *);
+
+	struct sock		*sock;		/* Parent socket */
+	struct list_head	list;		/* Keep a list of all open
+						 * prepared sockets */
+
+	atomic_t		ref_count;
+};
+
+/* Private data stored for received packets in the skb.
+ */
+struct pppol2tp_skb_cb {
+	u16			ns;
+	u16			nr;
+	u16			has_seq;
+	u16			length;
+	unsigned long		expires;
+};
+
+#define PPPOL2TP_SKB_CB(skb)	((struct pppol2tp_skb_cb *) &skb->cb[sizeof(struct inet_skb_parm)])
+
+static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb);
+static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel);
+
+static atomic_t pppol2tp_tunnel_count;
+static atomic_t pppol2tp_session_count;
+static struct ppp_channel_ops pppol2tp_chan_ops = { pppol2tp_xmit , NULL };
+static struct proto_ops pppol2tp_ops;
+static LIST_HEAD(pppol2tp_tunnel_list);
+static DEFINE_RWLOCK(pppol2tp_tunnel_list_lock);
+
+/* Helpers to obtain tunnel/session contexts from sockets.
+ */
+static inline struct pppol2tp_session *pppol2tp_sock_to_session(struct sock *sk)
+{
+	struct pppol2tp_session *session;
+
+	if (sk == NULL)
+		return NULL;
+
+	session = (struct pppol2tp_session *)(sk->sk_user_data);
+	if (session == NULL)
+		return NULL;
+
+	BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+
+	return session;
+}
+
+static inline struct pppol2tp_tunnel *pppol2tp_sock_to_tunnel(struct sock *sk)
+{
+	struct pppol2tp_tunnel *tunnel;
+
+	if (sk == NULL)
+		return NULL;
+
+	tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data);
+	if (tunnel == NULL)
+		return NULL;
+
+	BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+
+	return tunnel;
+}
+
+/* Tunnel reference counts. Incremented per session that is added to
+ * the tunnel.
+ */
+static inline void pppol2tp_tunnel_inc_refcount(struct pppol2tp_tunnel *tunnel)
+{
+	atomic_inc(&tunnel->ref_count);
+}
+
+static inline void pppol2tp_tunnel_dec_refcount(struct pppol2tp_tunnel *tunnel)
+{
+	if (atomic_dec_and_test(&tunnel->ref_count))
+		pppol2tp_tunnel_free(tunnel);
+}
+
+/* Session hash list.
+ * The session_id SHOULD be random according to RFC2661, but several
+ * L2TP implementations (Cisco and Microsoft) use incrementing
+ * session_ids.  So we do a real hash on the session_id, rather than a
+ * simple bitmask.
+ */
+static inline struct hlist_head *
+pppol2tp_session_id_hash(struct pppol2tp_tunnel *tunnel, u16 session_id)
+{
+	unsigned long hash_val = (unsigned long) session_id;
+	return &tunnel->session_hlist[hash_long(hash_val, PPPOL2TP_HASH_BITS)];
+}
+
+/* Lookup a session by id
+ */
+static struct pppol2tp_session *
+pppol2tp_session_find(struct pppol2tp_tunnel *tunnel, u16 session_id)
+{
+	struct hlist_head *session_list =
+		pppol2tp_session_id_hash(tunnel, session_id);
+	struct pppol2tp_session *session;
+	struct hlist_node *walk;
+
+	read_lock(&tunnel->hlist_lock);
+	hlist_for_each_entry(session, walk, session_list, hlist) {
+		if (session->tunnel_addr.s_session == session_id) {
+			read_unlock(&tunnel->hlist_lock);
+			return session;
+		}
+	}
+	read_unlock(&tunnel->hlist_lock);
+
+	return NULL;
+}
+
+/* Lookup a tunnel by id
+ */
+static struct pppol2tp_tunnel *pppol2tp_tunnel_find(u16 tunnel_id)
+{
+	struct pppol2tp_tunnel *tunnel = NULL;
+
+	read_lock(&pppol2tp_tunnel_list_lock);
+	list_for_each_entry(tunnel, &pppol2tp_tunnel_list, list) {
+		if (tunnel->stats.tunnel_id == tunnel_id) {
+			read_unlock(&pppol2tp_tunnel_list_lock);
+			return tunnel;
+		}
+	}
+	read_unlock(&pppol2tp_tunnel_list_lock);
+
+	return NULL;
+}
+
+/*****************************************************************************
+ * Receive data handling
+ *****************************************************************************/
+
+/* Queue a skb in order. We come here only if the skb has an L2TP sequence
+ * number.
+ */
+static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_buff *skb)
+{
+	struct sk_buff *skbp;
+	u16 ns = PPPOL2TP_SKB_CB(skb)->ns;
+
+	spin_lock(&session->reorder_q.lock);
+	skb_queue_walk(&session->reorder_q, skbp) {
+		if (PPPOL2TP_SKB_CB(skbp)->ns > ns) {
+			__skb_insert(skb, skbp->prev, skbp, &session->reorder_q);
+			PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+			       "%s: pkt %hu, inserted before %hu, reorder_q len=%d\n",
+			       session->name, ns, PPPOL2TP_SKB_CB(skbp)->ns,
+			       skb_queue_len(&session->reorder_q));
+			session->stats.rx_oos_packets++;
+			goto out;
+		}
+	}
+
+	__skb_queue_tail(&session->reorder_q, skb);
+
+out:
+	spin_unlock(&session->reorder_q.lock);
+}
+
+/* Dequeue a single skb.
+ */
+static void pppol2tp_recv_dequeue_skb(struct pppol2tp_session *session, struct sk_buff *skb)
+{
+	struct pppol2tp_tunnel *tunnel = session->tunnel;
+	int length = PPPOL2TP_SKB_CB(skb)->length;
+	struct sock *session_sock = NULL;
+
+	/* We're about to requeue the skb, so unlink it and return resources
+	 * to its current owner (a socket receive buffer).
+	 */
+	skb_unlink(skb, &session->reorder_q);
+	skb_orphan(skb);
+
+	tunnel->stats.rx_packets++;
+	tunnel->stats.rx_bytes += length;
+	session->stats.rx_packets++;
+	session->stats.rx_bytes += length;
+
+	if (PPPOL2TP_SKB_CB(skb)->has_seq) {
+		/* Bump our Nr */
+		session->nr++;
+		PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+		       "%s: updated nr to %hu\n", session->name, session->nr);
+	}
+
+	/* If the socket is bound, send it in to PPP's input queue. Otherwise
+	 * queue it on the session socket.
+	 */
+	session_sock = session->sock;
+	if (session_sock->sk_state & PPPOX_BOUND) {
+		struct pppox_sock *po;
+		PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+		       "%s: recv %d byte data frame, passing to ppp\n",
+		       session->name, length);
+
+		/* We need to forget all info related to the L2TP packet
+		 * gathered in the skb as we are going to reuse the same
+		 * skb for the inner packet.
+		 * Namely we need to:
+		 * - reset xfrm (IPSec) information as it applies to
+		 *   the outer L2TP packet and not to the inner one
+		 * - release the dst to force a route lookup on the inner
+		 *   IP packet since skb->dst currently points to the dst
+		 *   of the UDP tunnel
+		 * - reset netfilter information as it doesn't apply
+		 *   to the inner packet either
+		 */
+		secpath_reset(skb);
+		dst_release(skb->dst);
+		skb->dst = NULL;
+		nf_reset(skb);
+
+		po = pppox_sk(session_sock);
+		ppp_input(&po->chan, skb);
+	} else {
+		PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+		       "%s: socket not bound\n", session->name);
+
+		/* Not bound. Nothing we can do, so discard. */
+		session->stats.rx_errors++;
+		kfree_skb(skb);
+	}
+
+	sock_put(session->sock);
+}
+
+/* Dequeue skbs from the session's reorder_q, subject to packet order.
+ * Skbs that have been in the queue for too long are simply discarded.
+ */
+static void pppol2tp_recv_dequeue(struct pppol2tp_session *session)
+{
+	struct sk_buff *skb;
+	struct sk_buff *tmp;
+
+	/* If the pkt at the head of the queue has the nr that we
+	 * expect to send up next, dequeue it and any other
+	 * in-sequence packets behind it.
+	 */
+	spin_lock(&session->reorder_q.lock);
+	skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
+		if (time_after(jiffies, PPPOL2TP_SKB_CB(skb)->expires)) {
+			session->stats.rx_seq_discards++;
+			session->stats.rx_errors++;
+			PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+			       "%s: oos pkt %hu len %d discarded (too old), "
+			       "waiting for %hu, reorder_q_len=%d\n",
+			       session->name, PPPOL2TP_SKB_CB(skb)->ns,
+			       PPPOL2TP_SKB_CB(skb)->length, session->nr,
+			       skb_queue_len(&session->reorder_q));
+			__skb_unlink(skb, &session->reorder_q);
+			kfree_skb(skb);
+			continue;
+		}
+
+		if (PPPOL2TP_SKB_CB(skb)->has_seq) {
+			if (PPPOL2TP_SKB_CB(skb)->ns != session->nr) {
+				PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+				       "%s: holding oos pkt %hu len %d, "
+				       "waiting for %hu, reorder_q_len=%d\n",
+				       session->name, PPPOL2TP_SKB_CB(skb)->ns,
+				       PPPOL2TP_SKB_CB(skb)->length, session->nr,
+				       skb_queue_len(&session->reorder_q));
+				goto out;
+			}
+		}
+		spin_unlock(&session->reorder_q.lock);
+		pppol2tp_recv_dequeue_skb(session, skb);
+		spin_lock(&session->reorder_q.lock);
+	}
+
+out:
+	spin_unlock(&session->reorder_q.lock);
+}
+
+/* Internal receive frame. Do the real work of receiving an L2TP data frame
+ * here. The skb is not on a list when we get here.
+ * Returns 0 if the packet was a data packet and was successfully passed on.
+ * Returns 1 if the packet was not a good data packet and could not be
+ * forwarded.  All such packets are passed up to userspace to deal with.
+ */
+static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
+{
+	struct pppol2tp_session *session = NULL;
+	struct pppol2tp_tunnel *tunnel;
+	unsigned char *ptr;
+	u16 hdrflags;
+	u16 tunnel_id, session_id;
+	int length;
+	struct udphdr *uh;
+
+	tunnel = pppol2tp_sock_to_tunnel(sock);
+	if (tunnel == NULL)
+		goto error;
+
+	/* Short packet? */
+	if (skb->len < sizeof(struct udphdr)) {
+		PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+		       "%s: recv short packet (len=%d)\n", tunnel->name, skb->len);
+		goto error;
+	}
+
+	/* Point to L2TP header */
+	ptr = skb->data + sizeof(struct udphdr);
+
+	/* Get L2TP header flags */
+	hdrflags = ntohs(*(__be16*)ptr);
+
+	/* Trace packet contents, if enabled */
+	if (tunnel->debug & PPPOL2TP_MSG_DATA) {
+		printk(KERN_DEBUG "%s: recv: ", tunnel->name);
+
+		for (length = 0; length < 16; length++)
+			printk(" %02X", ptr[length]);
+		printk("\n");
+	}
+
+	/* Get length of L2TP packet */
+	uh = (struct udphdr *) skb_transport_header(skb);
+	length = ntohs(uh->len) - sizeof(struct udphdr);
+
+	/* Too short? */
+	if (length < 12) {
+		PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+		       "%s: recv short L2TP packet (len=%d)\n", tunnel->name, length);
+		goto error;
+	}
+
+	/* If type is control packet, it is handled by userspace. */
+	if (hdrflags & L2TP_HDRFLAG_T) {
+		PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+		       "%s: recv control packet, len=%d\n", tunnel->name, length);
+		goto error;
+	}
+
+	/* Skip flags */
+	ptr += 2;
+
+	/* If length is present, skip it */
+	if (hdrflags & L2TP_HDRFLAG_L)
+		ptr += 2;
+
+	/* Extract tunnel and session ID */
+	tunnel_id = ntohs(*(__be16 *) ptr);
+	ptr += 2;
+	session_id = ntohs(*(__be16 *) ptr);
+	ptr += 2;
+
+	/* Find the session context */
+	session = pppol2tp_session_find(tunnel, session_id);
+	if (!session) {
+		/* Not found? Pass to userspace to deal with */
+		PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+		       "%s: no socket found (%hu/%hu). Passing up.\n",
+		       tunnel->name, tunnel_id, session_id);
+		goto error;
+	}
+	sock_hold(session->sock);
+
+	/* The ref count on the socket was increased by the above call since
+	 * we now hold a pointer to the session. Take care to do sock_put()
+	 * when exiting this function from now on...
+	 */
+
+	/* Handle the optional sequence numbers.  If we are the LAC,
+	 * enable/disable sequence numbers under the control of the LNS.  If
+	 * no sequence numbers present but we were expecting them, discard
+	 * frame.
+	 */
+	if (hdrflags & L2TP_HDRFLAG_S) {
+		u16 ns, nr;
+		ns = ntohs(*(__be16 *) ptr);
+		ptr += 2;
+		nr = ntohs(*(__be16 *) ptr);
+		ptr += 2;
+
+		/* Received a packet with sequence numbers. If we're the LNS,
+		 * check if we sre sending sequence numbers and if not,
+		 * configure it so.
+		 */
+		if ((!session->lns_mode) && (!session->send_seq)) {
+			PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_INFO,
+			       "%s: requested to enable seq numbers by LNS\n",
+			       session->name);
+			session->send_seq = -1;
+		}
+
+		/* Store L2TP info in the skb */
+		PPPOL2TP_SKB_CB(skb)->ns = ns;
+		PPPOL2TP_SKB_CB(skb)->nr = nr;
+		PPPOL2TP_SKB_CB(skb)->has_seq = 1;
+
+		PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+		       "%s: recv data ns=%hu, nr=%hu, session nr=%hu\n",
+		       session->name, ns, nr, session->nr);
+	} else {
+		/* No sequence numbers.
+		 * If user has configured mandatory sequence numbers, discard.
+		 */
+		if (session->recv_seq) {
+			PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_WARNING,
+			       "%s: recv data has no seq numbers when required. "
+			       "Discarding\n", session->name);
+			session->stats.rx_seq_discards++;
+			session->stats.rx_errors++;
+			goto discard;
+		}
+
+		/* If we're the LAC and we're sending sequence numbers, the
+		 * LNS has requested that we no longer send sequence numbers.
+		 * If we're the LNS and we're sending sequence numbers, the
+		 * LAC is broken. Discard the frame.
+		 */
+		if ((!session->lns_mode) && (session->send_seq)) {
+			PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_INFO,
+			       "%s: requested to disable seq numbers by LNS\n",
+			       session->name);
+			session->send_seq = 0;
+		} else if (session->send_seq) {
+			PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_WARNING,
+			       "%s: recv data has no seq numbers when required. "
+			       "Discarding\n", session->name);
+			session->stats.rx_seq_discards++;
+			session->stats.rx_errors++;
+			goto discard;
+		}
+
+		/* Store L2TP info in the skb */
+		PPPOL2TP_SKB_CB(skb)->has_seq = 0;
+	}
+
+	/* If offset bit set, skip it. */
+	if (hdrflags & L2TP_HDRFLAG_O)
+		ptr += 2 + ntohs(*(__be16 *) ptr);
+
+	skb_pull(skb, ptr - skb->data);
+
+	/* Skip PPP header, if present.	 In testing, Microsoft L2TP clients
+	 * don't send the PPP header (PPP header compression enabled), but
+	 * other clients can include the header. So we cope with both cases
+	 * here. The PPP header is always FF03 when using L2TP.
+	 *
+	 * Note that skb->data[] isn't dereferenced from a u16 ptr here since
+	 * the field may be unaligned.
+	 */
+	if ((skb->data[0] == 0xff) && (skb->data[1] == 0x03))
+		skb_pull(skb, 2);
+
+	/* Prepare skb for adding to the session's reorder_q.  Hold
+	 * packets for max reorder_timeout or 1 second if not
+	 * reordering.
+	 */
+	PPPOL2TP_SKB_CB(skb)->length = length;
+	PPPOL2TP_SKB_CB(skb)->expires = jiffies +
+		(session->reorder_timeout ? session->reorder_timeout : HZ);
+
+	/* Add packet to the session's receive queue. Reordering is done here, if
+	 * enabled. Saved L2TP protocol info is stored in skb->sb[].
+	 */
+	if (PPPOL2TP_SKB_CB(skb)->has_seq) {
+		if (session->reorder_timeout != 0) {
+			/* Packet reordering enabled. Add skb to session's
+			 * reorder queue, in order of ns.
+			 */
+			pppol2tp_recv_queue_skb(session, skb);
+		} else {
+			/* Packet reordering disabled. Discard out-of-sequence
+			 * packets
+			 */
+			if (PPPOL2TP_SKB_CB(skb)->ns != session->nr) {
+				session->stats.rx_seq_discards++;
+				session->stats.rx_errors++;
+				PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+				       "%s: oos pkt %hu len %d discarded, "
+				       "waiting for %hu, reorder_q_len=%d\n",
+				       session->name, PPPOL2TP_SKB_CB(skb)->ns,
+				       PPPOL2TP_SKB_CB(skb)->length, session->nr,
+				       skb_queue_len(&session->reorder_q));
+				goto discard;
+			}
+			skb_queue_tail(&session->reorder_q, skb);
+		}
+	} else {
+		/* No sequence numbers. Add the skb to the tail of the
+		 * reorder queue. This ensures that it will be
+		 * delivered after all previous sequenced skbs.
+		 */
+		skb_queue_tail(&session->reorder_q, skb);
+	}
+
+	/* Try to dequeue as many skbs from reorder_q as we can. */
+	pppol2tp_recv_dequeue(session);
+
+	return 0;
+
+discard:
+	kfree_skb(skb);
+	sock_put(session->sock);
+
+	return 0;
+
+error:
+	return 1;
+}
+
+/* UDP encapsulation receive handler. See net/ipv4/udp.c.
+ * Return codes:
+ * 0 : success.
+ * <0: error
+ * >0: skb should be passed up to userspace as UDP.
+ */
+static int pppol2tp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
+{
+	struct pppol2tp_tunnel *tunnel;
+
+	tunnel = pppol2tp_sock_to_tunnel(sk);
+	if (tunnel == NULL)
+		goto pass_up;
+
+	PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+	       "%s: received %d bytes\n", tunnel->name, skb->len);
+
+	if (pppol2tp_recv_core(sk, skb))
+		goto pass_up;
+
+	return 0;
+
+pass_up:
+	return 1;
+}
+
+/* Receive message. This is the recvmsg for the PPPoL2TP socket.
+ */
+static int pppol2tp_recvmsg(struct kiocb *iocb, struct socket *sock,
+			    struct msghdr *msg, size_t len,
+			    int flags)
+{
+	int err;
+	struct sk_buff *skb;
+	struct sock *sk = sock->sk;
+
+	err = -EIO;
+	if (sk->sk_state & PPPOX_BOUND)
+		goto end;
+
+	msg->msg_namelen = 0;
+
+	err = 0;
+	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
+				flags & MSG_DONTWAIT, &err);
+	if (skb) {
+		err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data,
+				     skb->len);
+		if (err < 0)
+			goto do_skb_free;
+		err = skb->len;
+	}
+do_skb_free:
+	kfree_skb(skb);
+end:
+	return err;
+}
+
+/************************************************************************
+ * Transmit handling
+ ***********************************************************************/
+
+/* Tell how big L2TP headers are for a particular session. This
+ * depends on whether sequence numbers are being used.
+ */
+static inline int pppol2tp_l2tp_header_len(struct pppol2tp_session *session)
+{
+	if (session->send_seq)
+		return PPPOL2TP_L2TP_HDR_SIZE_SEQ;
+
+	return PPPOL2TP_L2TP_HDR_SIZE_NOSEQ;
+}
+
+/* Build an L2TP header for the session into the buffer provided.
+ */
+static void pppol2tp_build_l2tp_header(struct pppol2tp_session *session,
+				       void *buf)
+{
+	__be16 *bufp = buf;
+	u16 flags = L2TP_HDR_VER;
+
+	if (session->send_seq)
+		flags |= L2TP_HDRFLAG_S;
+
+	/* Setup L2TP header.
+	 * FIXME: Can this ever be unaligned? Is direct dereferencing of
+	 * 16-bit header fields safe here for all architectures?
+	 */
+	*bufp++ = htons(flags);
+	*bufp++ = htons(session->tunnel_addr.d_tunnel);
+	*bufp++ = htons(session->tunnel_addr.d_session);
+	if (session->send_seq) {
+		*bufp++ = htons(session->ns);
+		*bufp++ = 0;
+		session->ns++;
+		PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+		       "%s: updated ns to %hu\n", session->name, session->ns);
+	}
+}
+
+/* This is the sendmsg for the PPPoL2TP pppol2tp_session socket.  We come here
+ * when a user application does a sendmsg() on the session socket. L2TP and
+ * PPP headers must be inserted into the user's data.
+ */
+static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *m,
+			    size_t total_len)
+{
+	static const unsigned char ppph[2] = { 0xff, 0x03 };
+	struct sock *sk = sock->sk;
+	struct inet_sock *inet;
+	__wsum csum = 0;
+	struct sk_buff *skb;
+	int error;
+	int hdr_len;
+	struct pppol2tp_session *session;
+	struct pppol2tp_tunnel *tunnel;
+	struct udphdr *uh;
+
+	error = -ENOTCONN;
+	if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
+		goto error;
+
+	/* Get session and tunnel contexts */
+	error = -EBADF;
+	session = pppol2tp_sock_to_session(sk);
+	if (session == NULL)
+		goto error;
+
+	tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+	if (tunnel == NULL)
+		goto error;
+
+	/* What header length is configured for this session? */
+	hdr_len = pppol2tp_l2tp_header_len(session);
+
+	/* Allocate a socket buffer */
+	error = -ENOMEM;
+	skb = sock_wmalloc(sk, NET_SKB_PAD + sizeof(struct iphdr) +
+			   sizeof(struct udphdr) + hdr_len +
+			   sizeof(ppph) + total_len,
+			   0, GFP_KERNEL);
+	if (!skb)
+		goto error;
+
+	/* Reserve space for headers. */
+	skb_reserve(skb, NET_SKB_PAD);
+	skb_reset_network_header(skb);
+	skb_reserve(skb, sizeof(struct iphdr));
+	skb_reset_transport_header(skb);
+
+	/* Build UDP header */
+	inet = inet_sk(session->tunnel_sock);
+	uh = (struct udphdr *) skb->data;
+	uh->source = inet->sport;
+	uh->dest = inet->dport;
+	uh->len = htons(hdr_len + sizeof(ppph) + total_len);
+	uh->check = 0;
+	skb_put(skb, sizeof(struct udphdr));
+
+	/* Build L2TP header */
+	pppol2tp_build_l2tp_header(session, skb->data);
+	skb_put(skb, hdr_len);
+
+	/* Add PPP header */
+	skb->data[0] = ppph[0];
+	skb->data[1] = ppph[1];
+	skb_put(skb, 2);
+
+	/* Copy user data into skb */
+	error = memcpy_fromiovec(skb->data, m->msg_iov, total_len);
+	if (error < 0) {
+		kfree_skb(skb);
+		goto error;
+	}
+	skb_put(skb, total_len);
+
+	/* Calculate UDP checksum if configured to do so */
+	if (session->tunnel_sock->sk_no_check != UDP_CSUM_NOXMIT)
+		csum = udp_csum_outgoing(sk, skb);
+
+	/* Debug */
+	if (session->send_seq)
+		PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+		       "%s: send %Zd bytes, ns=%hu\n", session->name,
+		       total_len, session->ns - 1);
+	else
+		PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+		       "%s: send %Zd bytes\n", session->name, total_len);
+
+	if (session->debug & PPPOL2TP_MSG_DATA) {
+		int i;
+		unsigned char *datap = skb->data;
+
+		printk(KERN_DEBUG "%s: xmit:", session->name);
+		for (i = 0; i < total_len; i++) {
+			printk(" %02X", *datap++);
+			if (i == 15) {
+				printk(" ...");
+				break;
+			}
+		}
+		printk("\n");
+	}
+
+	/* Queue the packet to IP for output */
+	error = ip_queue_xmit(skb, 1);
+
+	/* Update stats */
+	if (error >= 0) {
+		tunnel->stats.tx_packets++;
+		tunnel->stats.tx_bytes += skb->len;
+		session->stats.tx_packets++;
+		session->stats.tx_bytes += skb->len;
+	} else {
+		tunnel->stats.tx_errors++;
+		session->stats.tx_errors++;
+	}
+
+error:
+	return error;
+}
+
+/* Transmit function called by generic PPP driver.  Sends PPP frame
+ * over PPPoL2TP socket.
+ *
+ * This is almost the same as pppol2tp_sendmsg(), but rather than
+ * being called with a msghdr from userspace, it is called with a skb
+ * from the kernel.
+ *
+ * The supplied skb from ppp doesn't have enough headroom for the
+ * insertion of L2TP, UDP and IP headers so we need to allocate more
+ * headroom in the skb. This will create a cloned skb. But we must be
+ * careful in the error case because the caller will expect to free
+ * the skb it supplied, not our cloned skb. So we take care to always
+ * leave the original skb unfreed if we return an error.
+ */
+static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
+{
+	static const u8 ppph[2] = { 0xff, 0x03 };
+	struct sock *sk = (struct sock *) chan->private;
+	struct sock *sk_tun;
+	int hdr_len;
+	struct pppol2tp_session *session;
+	struct pppol2tp_tunnel *tunnel;
+	int rc;
+	int headroom;
+	int data_len = skb->len;
+	struct inet_sock *inet;
+	__wsum csum = 0;
+	struct sk_buff *skb2 = NULL;
+	struct udphdr *uh;
+
+	if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
+		goto abort;
+
+	/* Get session and tunnel contexts from the socket */
+	session = pppol2tp_sock_to_session(sk);
+	if (session == NULL)
+		goto abort;
+
+	sk_tun = session->tunnel_sock;
+	if (sk_tun == NULL)
+		goto abort;
+	tunnel = pppol2tp_sock_to_tunnel(sk_tun);
+	if (tunnel == NULL)
+		goto abort;
+
+	/* What header length is configured for this session? */
+	hdr_len = pppol2tp_l2tp_header_len(session);
+
+	/* Check that there's enough headroom in the skb to insert IP,
+	 * UDP and L2TP and PPP headers. If not enough, expand it to
+	 * make room. Note that a new skb (or a clone) is
+	 * allocated. If we return an error from this point on, make
+	 * sure we free the new skb but do not free the original skb
+	 * since that is done by the caller for the error case.
+	 */
+	headroom = NET_SKB_PAD + sizeof(struct iphdr) +
+		sizeof(struct udphdr) + hdr_len + sizeof(ppph);
+	if (skb_headroom(skb) < headroom) {
+		skb2 = skb_realloc_headroom(skb, headroom);
+		if (skb2 == NULL)
+			goto abort;
+	} else
+		skb2 = skb;
+
+	/* Check that the socket has room */
+	if (atomic_read(&sk_tun->sk_wmem_alloc) < sk_tun->sk_sndbuf)
+		skb_set_owner_w(skb2, sk_tun);
+	else
+		goto discard;
+
+	/* Setup PPP header */
+	skb_push(skb2, sizeof(ppph));
+	skb2->data[0] = ppph[0];
+	skb2->data[1] = ppph[1];
+
+	/* Setup L2TP header */
+	skb_push(skb2, hdr_len);
+	pppol2tp_build_l2tp_header(session, skb2->data);
+
+	/* Setup UDP header */
+	inet = inet_sk(sk_tun);
+	skb_push(skb2, sizeof(struct udphdr));
+	skb_reset_transport_header(skb2);
+	uh = (struct udphdr *) skb2->data;
+	uh->source = inet->sport;
+	uh->dest = inet->dport;
+	uh->len = htons(sizeof(struct udphdr) + hdr_len + sizeof(ppph) + data_len);
+	uh->check = 0;
+
+	/* Calculate UDP checksum if configured to do so */
+	if (sk_tun->sk_no_check != UDP_CSUM_NOXMIT)
+		csum = udp_csum_outgoing(sk_tun, skb2);
+
+	/* Debug */
+	if (session->send_seq)
+		PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+		       "%s: send %d bytes, ns=%hu\n", session->name,
+		       data_len, session->ns - 1);
+	else
+		PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+		       "%s: send %d bytes\n", session->name, data_len);
+
+	if (session->debug & PPPOL2TP_MSG_DATA) {
+		int i;
+		unsigned char *datap = skb2->data;
+
+		printk(KERN_DEBUG "%s: xmit:", session->name);
+		for (i = 0; i < data_len; i++) {
+			printk(" %02X", *datap++);
+			if (i == 31) {
+				printk(" ...");
+				break;
+			}
+		}
+		printk("\n");
+	}
+
+	/* Get routing info from the tunnel socket */
+	skb2->dst = sk_dst_get(sk_tun);
+
+	/* Queue the packet to IP for output */
+	rc = ip_queue_xmit(skb2, 1);
+
+	/* Update stats */
+	if (rc >= 0) {
+		tunnel->stats.tx_packets++;
+		tunnel->stats.tx_bytes += skb2->len;
+		session->stats.tx_packets++;
+		session->stats.tx_bytes += skb2->len;
+	} else {
+		tunnel->stats.tx_errors++;
+		session->stats.tx_errors++;
+	}
+
+	/* Free the original skb */
+	kfree_skb(skb);
+
+	return 1;
+
+discard:
+	/* Free the new skb. Caller will free original skb. */
+	if (skb2 != skb)
+		kfree_skb(skb2);
+abort:
+	return 0;
+}
+
+/*****************************************************************************
+ * Session (and tunnel control) socket create/destroy.
+ *****************************************************************************/
+
+/* When the tunnel UDP socket is closed, all the attached sockets need to go
+ * too.
+ */
+static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel)
+{
+	int hash;
+	struct hlist_node *walk;
+	struct hlist_node *tmp;
+	struct pppol2tp_session *session;
+	struct sock *sk;
+
+	if (tunnel == NULL)
+		BUG();
+
+	PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+	       "%s: closing all sessions...\n", tunnel->name);
+
+	write_lock(&tunnel->hlist_lock);
+	for (hash = 0; hash < PPPOL2TP_HASH_SIZE; hash++) {
+again:
+		hlist_for_each_safe(walk, tmp, &tunnel->session_hlist[hash]) {
+			session = hlist_entry(walk, struct pppol2tp_session, hlist);
+
+			sk = session->sock;
+
+			PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+			       "%s: closing session\n", session->name);
+
+			hlist_del_init(&session->hlist);
+
+			/* Since we should hold the sock lock while
+			 * doing any unbinding, we need to release the
+			 * lock we're holding before taking that lock.
+			 * Hold a reference to the sock so it doesn't
+			 * disappear as we're jumping between locks.
+			 */
+			sock_hold(sk);
+			write_unlock(&tunnel->hlist_lock);
+			lock_sock(sk);
+
+			if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+				pppox_unbind_sock(sk);
+				sk->sk_state = PPPOX_DEAD;
+				sk->sk_state_change(sk);
+			}
+
+			/* Purge any queued data */
+			skb_queue_purge(&sk->sk_receive_queue);
+			skb_queue_purge(&sk->sk_write_queue);
+			skb_queue_purge(&session->reorder_q);
+
+			release_sock(sk);
+			sock_put(sk);
+
+			/* Now restart from the beginning of this hash
+			 * chain.  We always remove a session from the
+			 * list so we are guaranteed to make forward
+			 * progress.
+			 */
+			write_lock(&tunnel->hlist_lock);
+			goto again;
+		}
+	}
+	write_unlock(&tunnel->hlist_lock);
+}
+
+/* Really kill the tunnel.
+ * Come here only when all sessions have been cleared from the tunnel.
+ */
+static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel)
+{
+	/* Remove from socket list */
+	write_lock(&pppol2tp_tunnel_list_lock);
+	list_del_init(&tunnel->list);
+	write_unlock(&pppol2tp_tunnel_list_lock);
+
+	atomic_dec(&pppol2tp_tunnel_count);
+	kfree(tunnel);
+}
+
+/* Tunnel UDP socket destruct hook.
+ * The tunnel context is deleted only when all session sockets have been
+ * closed.
+ */
+static void pppol2tp_tunnel_destruct(struct sock *sk)
+{
+	struct pppol2tp_tunnel *tunnel;
+
+	tunnel = pppol2tp_sock_to_tunnel(sk);
+	if (tunnel == NULL)
+		goto end;
+
+	PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+	       "%s: closing...\n", tunnel->name);
+
+	/* Close all sessions */
+	pppol2tp_tunnel_closeall(tunnel);
+
+	/* No longer an encapsulation socket. See net/ipv4/udp.c */
+	(udp_sk(sk))->encap_type = 0;
+	(udp_sk(sk))->encap_rcv = NULL;
+
+	/* Remove hooks into tunnel socket */
+	tunnel->sock = NULL;
+	sk->sk_destruct = tunnel->old_sk_destruct;
+	sk->sk_user_data = NULL;
+
+	/* Call original (UDP) socket descructor */
+	if (sk->sk_destruct != NULL)
+		(*sk->sk_destruct)(sk);
+
+	pppol2tp_tunnel_dec_refcount(tunnel);
+
+end:
+	return;
+}
+
+/* Really kill the session socket. (Called from sock_put() if
+ * refcnt == 0.)
+ */
+static void pppol2tp_session_destruct(struct sock *sk)
+{
+	struct pppol2tp_session *session = NULL;
+
+	if (sk->sk_user_data != NULL) {
+		struct pppol2tp_tunnel *tunnel;
+
+		session = pppol2tp_sock_to_session(sk);
+		if (session == NULL)
+			goto out;
+
+		/* Don't use pppol2tp_sock_to_tunnel() here to
+		 * get the tunnel context because the tunnel
+		 * socket might have already been closed (its
+		 * sk->sk_user_data will be NULL) so use the
+		 * session's private tunnel ptr instead.
+		 */
+		tunnel = session->tunnel;
+		if (tunnel != NULL) {
+			BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+
+			/* If session_id is zero, this is a null
+			 * session context, which was created for a
+			 * socket that is being used only to manage
+			 * tunnels.
+			 */
+			if (session->tunnel_addr.s_session != 0) {
+				/* Delete the session socket from the
+				 * hash
+				 */
+				write_lock(&tunnel->hlist_lock);
+				hlist_del_init(&session->hlist);
+				write_unlock(&tunnel->hlist_lock);
+
+				atomic_dec(&pppol2tp_session_count);
+			}
+
+			/* This will delete the tunnel context if this
+			 * is the last session on the tunnel.
+			 */
+			session->tunnel = NULL;
+			session->tunnel_sock = NULL;
+			pppol2tp_tunnel_dec_refcount(tunnel);
+		}
+	}
+
+	kfree(session);
+out:
+	return;
+}
+
+/* Called when the PPPoX socket (session) is closed.
+ */
+static int pppol2tp_release(struct socket *sock)
+{
+	struct sock *sk = sock->sk;
+	int error;
+
+	if (!sk)
+		return 0;
+
+	error = -EBADF;
+	lock_sock(sk);
+	if (sock_flag(sk, SOCK_DEAD) != 0)
+		goto error;
+
+	pppox_unbind_sock(sk);
+
+	/* Signal the death of the socket. */
+	sk->sk_state = PPPOX_DEAD;
+	sock_orphan(sk);
+	sock->sk = NULL;
+
+	/* Purge any queued data */
+	skb_queue_purge(&sk->sk_receive_queue);
+	skb_queue_purge(&sk->sk_write_queue);
+
+	release_sock(sk);
+
+	/* This will delete the session context via
+	 * pppol2tp_session_destruct() if the socket's refcnt drops to
+	 * zero.
+	 */
+	sock_put(sk);
+
+	return 0;
+
+error:
+	release_sock(sk);
+	return error;
+}
+
+/* Internal function to prepare a tunnel (UDP) socket to have PPPoX
+ * sockets attached to it.
+ */
+static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id,
+						   int *error)
+{
+	int err;
+	struct socket *sock = NULL;
+	struct sock *sk;
+	struct pppol2tp_tunnel *tunnel;
+	struct sock *ret = NULL;
+
+	/* Get the tunnel UDP socket from the fd, which was opened by
+	 * the userspace L2TP daemon.
+	 */
+	err = -EBADF;
+	sock = sockfd_lookup(fd, &err);
+	if (!sock) {
+		PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR,
+		       "tunl %hu: sockfd_lookup(fd=%d) returned %d\n",
+		       tunnel_id, fd, err);
+		goto err;
+	}
+
+	/* Quick sanity checks */
+	err = -ESOCKTNOSUPPORT;
+	if (sock->type != SOCK_DGRAM) {
+		PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR,
+		       "tunl %hu: fd %d wrong type, got %d, expected %d\n",
+		       tunnel_id, fd, sock->type, SOCK_DGRAM);
+		goto err;
+	}
+	err = -EAFNOSUPPORT;
+	if (sock->ops->family != AF_INET) {
+		PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR,
+		       "tunl %hu: fd %d wrong family, got %d, expected %d\n",
+		       tunnel_id, fd, sock->ops->family, AF_INET);
+		goto err;
+	}
+
+	err = -ENOTCONN;
+	sk = sock->sk;
+
+	/* Check if this socket has already been prepped */
+	tunnel = (struct pppol2tp_tunnel *)sk->sk_user_data;
+	if (tunnel != NULL) {
+		/* User-data field already set */
+		err = -EBUSY;
+		BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+
+		/* This socket has already been prepped */
+		ret = tunnel->sock;
+		goto out;
+	}
+
+	/* This socket is available and needs prepping. Create a new tunnel
+	 * context and init it.
+	 */
+	sk->sk_user_data = tunnel = kzalloc(sizeof(struct pppol2tp_tunnel), GFP_KERNEL);
+	if (sk->sk_user_data == NULL) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	tunnel->magic = L2TP_TUNNEL_MAGIC;
+	sprintf(&tunnel->name[0], "tunl %hu", tunnel_id);
+
+	tunnel->stats.tunnel_id = tunnel_id;
+	tunnel->debug = PPPOL2TP_DEFAULT_DEBUG_FLAGS;
+
+	/* Hook on the tunnel socket destructor so that we can cleanup
+	 * if the tunnel socket goes away.
+	 */
+	tunnel->old_sk_destruct = sk->sk_destruct;
+	sk->sk_destruct = &pppol2tp_tunnel_destruct;
+
+	tunnel->sock = sk;
+	sk->sk_allocation = GFP_ATOMIC;
+
+	/* Misc init */
+	rwlock_init(&tunnel->hlist_lock);
+
+	/* Add tunnel to our list */
+	INIT_LIST_HEAD(&tunnel->list);
+	write_lock(&pppol2tp_tunnel_list_lock);
+	list_add(&tunnel->list, &pppol2tp_tunnel_list);
+	write_unlock(&pppol2tp_tunnel_list_lock);
+	atomic_inc(&pppol2tp_tunnel_count);
+
+	/* Bump the reference count. The tunnel context is deleted
+	 * only when this drops to zero.
+	 */
+	pppol2tp_tunnel_inc_refcount(tunnel);
+
+	/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
+	(udp_sk(sk))->encap_type = UDP_ENCAP_L2TPINUDP;
+	(udp_sk(sk))->encap_rcv = pppol2tp_udp_encap_recv;
+
+	ret = tunnel->sock;
+
+	*error = 0;
+out:
+	if (sock)
+		sockfd_put(sock);
+
+	return ret;
+
+err:
+	*error = err;
+	goto out;
+}
+
+static struct proto pppol2tp_sk_proto = {
+	.name	  = "PPPOL2TP",
+	.owner	  = THIS_MODULE,
+	.obj_size = sizeof(struct pppox_sock),
+};
+
+/* socket() handler. Initialize a new struct sock.
+ */
+static int pppol2tp_create(struct socket *sock)
+{
+	int error = -ENOMEM;
+	struct sock *sk;
+
+	sk = sk_alloc(PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto, 1);
+	if (!sk)
+		goto out;
+
+	sock_init_data(sock, sk);
+
+	sock->state  = SS_UNCONNECTED;
+	sock->ops    = &pppol2tp_ops;
+
+	sk->sk_backlog_rcv = pppol2tp_recv_core;
+	sk->sk_protocol	   = PX_PROTO_OL2TP;
+	sk->sk_family	   = PF_PPPOX;
+	sk->sk_state	   = PPPOX_NONE;
+	sk->sk_type	   = SOCK_STREAM;
+	sk->sk_destruct	   = pppol2tp_session_destruct;
+
+	error = 0;
+
+out:
+	return error;
+}
+
+/* connect() handler. Attach a PPPoX socket to a tunnel UDP socket
+ */
+static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
+			    int sockaddr_len, int flags)
+{
+	struct sock *sk = sock->sk;
+	struct sockaddr_pppol2tp *sp = (struct sockaddr_pppol2tp *) uservaddr;
+	struct pppox_sock *po = pppox_sk(sk);
+	struct sock *tunnel_sock = NULL;
+	struct pppol2tp_session *session = NULL;
+	struct pppol2tp_tunnel *tunnel;
+	struct dst_entry *dst;
+	int error = 0;
+
+	lock_sock(sk);
+
+	error = -EINVAL;
+	if (sp->sa_protocol != PX_PROTO_OL2TP)
+		goto end;
+
+	/* Check for already bound sockets */
+	error = -EBUSY;
+	if (sk->sk_state & PPPOX_CONNECTED)
+		goto end;
+
+	/* We don't supporting rebinding anyway */
+	error = -EALREADY;
+	if (sk->sk_user_data)
+		goto end; /* socket is already attached */
+
+	/* Don't bind if s_tunnel is 0 */
+	error = -EINVAL;
+	if (sp->pppol2tp.s_tunnel == 0)
+		goto end;
+
+	/* Special case: prepare tunnel socket if s_session and
+	 * d_session is 0. Otherwise look up tunnel using supplied
+	 * tunnel id.
+	 */
+	if ((sp->pppol2tp.s_session == 0) && (sp->pppol2tp.d_session == 0)) {
+		tunnel_sock = pppol2tp_prepare_tunnel_socket(sp->pppol2tp.fd,
+							     sp->pppol2tp.s_tunnel,
+							     &error);
+		if (tunnel_sock == NULL)
+			goto end;
+
+		tunnel = tunnel_sock->sk_user_data;
+	} else {
+		tunnel = pppol2tp_tunnel_find(sp->pppol2tp.s_tunnel);
+
+		/* Error if we can't find the tunnel */
+		error = -ENOENT;
+		if (tunnel == NULL)
+			goto end;
+
+		tunnel_sock = tunnel->sock;
+	}
+
+	/* Check that this session doesn't already exist */
+	error = -EEXIST;
+	session = pppol2tp_session_find(tunnel, sp->pppol2tp.s_session);
+	if (session != NULL)
+		goto end;
+
+	/* Allocate and initialize a new session context. */
+	session = kzalloc(sizeof(struct pppol2tp_session), GFP_KERNEL);
+	if (session == NULL) {
+		error = -ENOMEM;
+		goto end;
+	}
+
+	skb_queue_head_init(&session->reorder_q);
+
+	session->magic	     = L2TP_SESSION_MAGIC;
+	session->owner	     = current->pid;
+	session->sock	     = sk;
+	session->tunnel	     = tunnel;
+	session->tunnel_sock = tunnel_sock;
+	session->tunnel_addr = sp->pppol2tp;
+	sprintf(&session->name[0], "sess %hu/%hu",
+		session->tunnel_addr.s_tunnel,
+		session->tunnel_addr.s_session);
+
+	session->stats.tunnel_id  = session->tunnel_addr.s_tunnel;
+	session->stats.session_id = session->tunnel_addr.s_session;
+
+	INIT_HLIST_NODE(&session->hlist);
+
+	/* Inherit debug options from tunnel */
+	session->debug = tunnel->debug;
+
+	/* Default MTU must allow space for UDP/L2TP/PPP
+	 * headers.
+	 */
+	session->mtu = session->mru = 1500 - PPPOL2TP_HEADER_OVERHEAD;
+
+	/* If PMTU discovery was enabled, use the MTU that was discovered */
+	dst = sk_dst_get(sk);
+	if (dst != NULL) {
+		u32 pmtu = dst_mtu(__sk_dst_get(sk));
+		if (pmtu != 0)
+			session->mtu = session->mru = pmtu -
+				PPPOL2TP_HEADER_OVERHEAD;
+		dst_release(dst);
+	}
+
+	/* Special case: if source & dest session_id == 0x0000, this socket is
+	 * being created to manage the tunnel. Don't add the session to the
+	 * session hash list, just set up the internal context for use by
+	 * ioctl() and sockopt() handlers.
+	 */
+	if ((session->tunnel_addr.s_session == 0) &&
+	    (session->tunnel_addr.d_session == 0)) {
+		error = 0;
+		sk->sk_user_data = session;
+		goto out_no_ppp;
+	}
+
+	/* Get tunnel context from the tunnel socket */
+	tunnel = pppol2tp_sock_to_tunnel(tunnel_sock);
+	if (tunnel == NULL) {
+		error = -EBADF;
+		goto end;
+	}
+
+	/* Right now, because we don't have a way to push the incoming skb's
+	 * straight through the UDP layer, the only header we need to worry
+	 * about is the L2TP header. This size is different depending on
+	 * whether sequence numbers are enabled for the data channel.
+	 */
+	po->chan.hdrlen = PPPOL2TP_L2TP_HDR_SIZE_NOSEQ;
+
+	po->chan.private = sk;
+	po->chan.ops	 = &pppol2tp_chan_ops;
+	po->chan.mtu	 = session->mtu;
+
+	error = ppp_register_channel(&po->chan);
+	if (error)
+		goto end;
+
+	/* This is how we get the session context from the socket. */
+	sk->sk_user_data = session;
+
+	/* Add session to the tunnel's hash list */
+	write_lock(&tunnel->hlist_lock);
+	hlist_add_head(&session->hlist,
+		       pppol2tp_session_id_hash(tunnel,
+						session->tunnel_addr.s_session));
+	write_unlock(&tunnel->hlist_lock);
+
+	atomic_inc(&pppol2tp_session_count);
+
+out_no_ppp:
+	pppol2tp_tunnel_inc_refcount(tunnel);
+	sk->sk_state = PPPOX_CONNECTED;
+	PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+	       "%s: created\n", session->name);
+
+end:
+	release_sock(sk);
+
+	if (error != 0)
+		PRINTK(session ? session->debug : -1, PPPOL2TP_MSG_CONTROL, KERN_WARNING,
+		       "%s: connect failed: %d\n", session->name, error);
+
+	return error;
+}
+
+/* getname() support.
+ */
+static int pppol2tp_getname(struct socket *sock, struct sockaddr *uaddr,
+			    int *usockaddr_len, int peer)
+{
+	int len = sizeof(struct sockaddr_pppol2tp);
+	struct sockaddr_pppol2tp sp;
+	int error = 0;
+	struct pppol2tp_session *session;
+
+	error = -ENOTCONN;
+	if (sock->sk->sk_state != PPPOX_CONNECTED)
+		goto end;
+
+	session = pppol2tp_sock_to_session(sock->sk);
+	if (session == NULL) {
+		error = -EBADF;
+		goto end;
+	}
+
+	sp.sa_family	= AF_PPPOX;
+	sp.sa_protocol	= PX_PROTO_OL2TP;
+	memcpy(&sp.pppol2tp, &session->tunnel_addr,
+	       sizeof(struct pppol2tp_addr));
+
+	memcpy(uaddr, &sp, len);
+
+	*usockaddr_len = len;
+
+	error = 0;
+
+end:
+	return error;
+}
+
+/****************************************************************************
+ * ioctl() handlers.
+ *
+ * The PPPoX socket is created for L2TP sessions: tunnels have their own UDP
+ * sockets. However, in order to control kernel tunnel features, we allow
+ * userspace to create a special "tunnel" PPPoX socket which is used for
+ * control only.  Tunnel PPPoX sockets have session_id == 0 and simply allow
+ * the user application to issue L2TP setsockopt(), getsockopt() and ioctl()
+ * calls.
+ ****************************************************************************/
+
+/* Session ioctl helper.
+ */
+static int pppol2tp_session_ioctl(struct pppol2tp_session *session,
+				  unsigned int cmd, unsigned long arg)
+{
+	struct ifreq ifr;
+	int err = 0;
+	struct sock *sk = session->sock;
+	int val = (int) arg;
+
+	PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_DEBUG,
+	       "%s: pppol2tp_session_ioctl(cmd=%#x, arg=%#lx)\n",
+	       session->name, cmd, arg);
+
+	sock_hold(sk);
+
+	switch (cmd) {
+	case SIOCGIFMTU:
+		err = -ENXIO;
+		if (!(sk->sk_state & PPPOX_CONNECTED))
+			break;
+
+		err = -EFAULT;
+		if (copy_from_user(&ifr, (void __user *) arg, sizeof(struct ifreq)))
+			break;
+		ifr.ifr_mtu = session->mtu;
+		if (copy_to_user((void __user *) arg, &ifr, sizeof(struct ifreq)))
+			break;
+
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get mtu=%d\n", session->name, session->mtu);
+		err = 0;
+		break;
+
+	case SIOCSIFMTU:
+		err = -ENXIO;
+		if (!(sk->sk_state & PPPOX_CONNECTED))
+			break;
+
+		err = -EFAULT;
+		if (copy_from_user(&ifr, (void __user *) arg, sizeof(struct ifreq)))
+			break;
+
+		session->mtu = ifr.ifr_mtu;
+
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set mtu=%d\n", session->name, session->mtu);
+		err = 0;
+		break;
+
+	case PPPIOCGMRU:
+		err = -ENXIO;
+		if (!(sk->sk_state & PPPOX_CONNECTED))
+			break;
+
+		err = -EFAULT;
+		if (put_user(session->mru, (int __user *) arg))
+			break;
+
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get mru=%d\n", session->name, session->mru);
+		err = 0;
+		break;
+
+	case PPPIOCSMRU:
+		err = -ENXIO;
+		if (!(sk->sk_state & PPPOX_CONNECTED))
+			break;
+
+		err = -EFAULT;
+		if (get_user(val,(int __user *) arg))
+			break;
+
+		session->mru = val;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set mru=%d\n", session->name, session->mru);
+		err = 0;
+		break;
+
+	case PPPIOCGFLAGS:
+		err = -EFAULT;
+		if (put_user(session->flags, (int __user *) arg))
+			break;
+
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get flags=%d\n", session->name, session->flags);
+		err = 0;
+		break;
+
+	case PPPIOCSFLAGS:
+		err = -EFAULT;
+		if (get_user(val, (int __user *) arg))
+			break;
+		session->flags = val;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set flags=%d\n", session->name, session->flags);
+		err = 0;
+		break;
+
+	case PPPIOCGL2TPSTATS:
+		err = -ENXIO;
+		if (!(sk->sk_state & PPPOX_CONNECTED))
+			break;
+
+		if (copy_to_user((void __user *) arg, &session->stats,
+				 sizeof(session->stats)))
+			break;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get L2TP stats\n", session->name);
+		err = 0;
+		break;
+
+	default:
+		err = -ENOSYS;
+		break;
+	}
+
+	sock_put(sk);
+
+	return err;
+}
+
+/* Tunnel ioctl helper.
+ *
+ * Note the special handling for PPPIOCGL2TPSTATS below. If the ioctl data
+ * specifies a session_id, the session ioctl handler is called. This allows an
+ * application to retrieve session stats via a tunnel socket.
+ */
+static int pppol2tp_tunnel_ioctl(struct pppol2tp_tunnel *tunnel,
+				 unsigned int cmd, unsigned long arg)
+{
+	int err = 0;
+	struct sock *sk = tunnel->sock;
+	struct pppol2tp_ioc_stats stats_req;
+
+	PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_DEBUG,
+	       "%s: pppol2tp_tunnel_ioctl(cmd=%#x, arg=%#lx)\n", tunnel->name,
+	       cmd, arg);
+
+	sock_hold(sk);
+
+	switch (cmd) {
+	case PPPIOCGL2TPSTATS:
+		err = -ENXIO;
+		if (!(sk->sk_state & PPPOX_CONNECTED))
+			break;
+
+		if (copy_from_user(&stats_req, (void __user *) arg,
+				   sizeof(stats_req))) {
+			err = -EFAULT;
+			break;
+		}
+		if (stats_req.session_id != 0) {
+			/* resend to session ioctl handler */
+			struct pppol2tp_session *session =
+				pppol2tp_session_find(tunnel, stats_req.session_id);
+			if (session != NULL)
+				err = pppol2tp_session_ioctl(session, cmd, arg);
+			else
+				err = -EBADR;
+			break;
+		}
+#ifdef CONFIG_XFRM
+		tunnel->stats.using_ipsec = (sk->sk_policy[0] || sk->sk_policy[1]) ? 1 : 0;
+#endif
+		if (copy_to_user((void __user *) arg, &tunnel->stats,
+				 sizeof(tunnel->stats))) {
+			err = -EFAULT;
+			break;
+		}
+		PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get L2TP stats\n", tunnel->name);
+		err = 0;
+		break;
+
+	default:
+		err = -ENOSYS;
+		break;
+	}
+
+	sock_put(sk);
+
+	return err;
+}
+
+/* Main ioctl() handler.
+ * Dispatch to tunnel or session helpers depending on the socket.
+ */
+static int pppol2tp_ioctl(struct socket *sock, unsigned int cmd,
+			  unsigned long arg)
+{
+	struct sock *sk = sock->sk;
+	struct pppol2tp_session *session;
+	struct pppol2tp_tunnel *tunnel;
+	int err;
+
+	if (!sk)
+		return 0;
+
+	err = -EBADF;
+	if (sock_flag(sk, SOCK_DEAD) != 0)
+		goto end;
+
+	err = -ENOTCONN;
+	if ((sk->sk_user_data == NULL) ||
+	    (!(sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND))))
+		goto end;
+
+	/* Get session context from the socket */
+	err = -EBADF;
+	session = pppol2tp_sock_to_session(sk);
+	if (session == NULL)
+		goto end;
+
+	/* Special case: if session's session_id is zero, treat ioctl as a
+	 * tunnel ioctl
+	 */
+	if ((session->tunnel_addr.s_session == 0) &&
+	    (session->tunnel_addr.d_session == 0)) {
+		err = -EBADF;
+		tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+		if (tunnel == NULL)
+			goto end;
+
+		err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg);
+		goto end;
+	}
+
+	err = pppol2tp_session_ioctl(session, cmd, arg);
+
+end:
+	return err;
+}
+
+/*****************************************************************************
+ * setsockopt() / getsockopt() support.
+ *
+ * The PPPoX socket is created for L2TP sessions: tunnels have their own UDP
+ * sockets. In order to control kernel tunnel features, we allow userspace to
+ * create a special "tunnel" PPPoX socket which is used for control only.
+ * Tunnel PPPoX sockets have session_id == 0 and simply allow the user
+ * application to issue L2TP setsockopt(), getsockopt() and ioctl() calls.
+ *****************************************************************************/
+
+/* Tunnel setsockopt() helper.
+ */
+static int pppol2tp_tunnel_setsockopt(struct sock *sk,
+				      struct pppol2tp_tunnel *tunnel,
+				      int optname, int val)
+{
+	int err = 0;
+
+	switch (optname) {
+	case PPPOL2TP_SO_DEBUG:
+		tunnel->debug = val;
+		PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set debug=%x\n", tunnel->name, tunnel->debug);
+		break;
+
+	default:
+		err = -ENOPROTOOPT;
+		break;
+	}
+
+	return err;
+}
+
+/* Session setsockopt helper.
+ */
+static int pppol2tp_session_setsockopt(struct sock *sk,
+				       struct pppol2tp_session *session,
+				       int optname, int val)
+{
+	int err = 0;
+
+	switch (optname) {
+	case PPPOL2TP_SO_RECVSEQ:
+		if ((val != 0) && (val != 1)) {
+			err = -EINVAL;
+			break;
+		}
+		session->recv_seq = val ? -1 : 0;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set recv_seq=%d\n", session->name,
+		       session->recv_seq);
+		break;
+
+	case PPPOL2TP_SO_SENDSEQ:
+		if ((val != 0) && (val != 1)) {
+			err = -EINVAL;
+			break;
+		}
+		session->send_seq = val ? -1 : 0;
+		{
+			struct sock *ssk      = session->sock;
+			struct pppox_sock *po = pppox_sk(ssk);
+			po->chan.hdrlen = val ? PPPOL2TP_L2TP_HDR_SIZE_SEQ :
+				PPPOL2TP_L2TP_HDR_SIZE_NOSEQ;
+		}
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set send_seq=%d\n", session->name, session->send_seq);
+		break;
+
+	case PPPOL2TP_SO_LNSMODE:
+		if ((val != 0) && (val != 1)) {
+			err = -EINVAL;
+			break;
+		}
+		session->lns_mode = val ? -1 : 0;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set lns_mode=%d\n", session->name,
+		       session->lns_mode);
+		break;
+
+	case PPPOL2TP_SO_DEBUG:
+		session->debug = val;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set debug=%x\n", session->name, session->debug);
+		break;
+
+	case PPPOL2TP_SO_REORDERTO:
+		session->reorder_timeout = msecs_to_jiffies(val);
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: set reorder_timeout=%d\n", session->name,
+		       session->reorder_timeout);
+		break;
+
+	default:
+		err = -ENOPROTOOPT;
+		break;
+	}
+
+	return err;
+}
+
+/* Main setsockopt() entry point.
+ * Does API checks, then calls either the tunnel or session setsockopt
+ * handler, according to whether the PPPoL2TP socket is a for a regular
+ * session or the special tunnel type.
+ */
+static int pppol2tp_setsockopt(struct socket *sock, int level, int optname,
+			       char __user *optval, int optlen)
+{
+	struct sock *sk = sock->sk;
+	struct pppol2tp_session *session = sk->sk_user_data;
+	struct pppol2tp_tunnel *tunnel;
+	int val;
+	int err;
+
+	if (level != SOL_PPPOL2TP)
+		return udp_prot.setsockopt(sk, level, optname, optval, optlen);
+
+	if (optlen < sizeof(int))
+		return -EINVAL;
+
+	if (get_user(val, (int __user *)optval))
+		return -EFAULT;
+
+	err = -ENOTCONN;
+	if (sk->sk_user_data == NULL)
+		goto end;
+
+	/* Get session context from the socket */
+	err = -EBADF;
+	session = pppol2tp_sock_to_session(sk);
+	if (session == NULL)
+		goto end;
+
+	/* Special case: if session_id == 0x0000, treat as operation on tunnel
+	 */
+	if ((session->tunnel_addr.s_session == 0) &&
+	    (session->tunnel_addr.d_session == 0)) {
+		err = -EBADF;
+		tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+		if (tunnel == NULL)
+			goto end;
+
+		err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val);
+	} else
+		err = pppol2tp_session_setsockopt(sk, session, optname, val);
+
+	err = 0;
+
+end:
+	return err;
+}
+
+/* Tunnel getsockopt helper. Called with sock locked.
+ */
+static int pppol2tp_tunnel_getsockopt(struct sock *sk,
+				      struct pppol2tp_tunnel *tunnel,
+				      int optname, int __user *val)
+{
+	int err = 0;
+
+	switch (optname) {
+	case PPPOL2TP_SO_DEBUG:
+		*val = tunnel->debug;
+		PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get debug=%x\n", tunnel->name, tunnel->debug);
+		break;
+
+	default:
+		err = -ENOPROTOOPT;
+		break;
+	}
+
+	return err;
+}
+
+/* Session getsockopt helper. Called with sock locked.
+ */
+static int pppol2tp_session_getsockopt(struct sock *sk,
+				       struct pppol2tp_session *session,
+				       int optname, int __user *val)
+{
+	int err = 0;
+
+	switch (optname) {
+	case PPPOL2TP_SO_RECVSEQ:
+		*val = session->recv_seq;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get recv_seq=%d\n", session->name, *val);
+		break;
+
+	case PPPOL2TP_SO_SENDSEQ:
+		*val = session->send_seq;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get send_seq=%d\n", session->name, *val);
+		break;
+
+	case PPPOL2TP_SO_LNSMODE:
+		*val = session->lns_mode;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get lns_mode=%d\n", session->name, *val);
+		break;
+
+	case PPPOL2TP_SO_DEBUG:
+		*val = session->debug;
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get debug=%d\n", session->name, *val);
+		break;
+
+	case PPPOL2TP_SO_REORDERTO:
+		*val = (int) jiffies_to_msecs(session->reorder_timeout);
+		PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+		       "%s: get reorder_timeout=%d\n", session->name, *val);
+		break;
+
+	default:
+		err = -ENOPROTOOPT;
+	}
+
+	return err;
+}
+
+/* Main getsockopt() entry point.
+ * Does API checks, then calls either the tunnel or session getsockopt
+ * handler, according to whether the PPPoX socket is a for a regular session
+ * or the special tunnel type.
+ */
+static int pppol2tp_getsockopt(struct socket *sock, int level,
+			       int optname, char __user *optval, int __user *optlen)
+{
+	struct sock *sk = sock->sk;
+	struct pppol2tp_session *session = sk->sk_user_data;
+	struct pppol2tp_tunnel *tunnel;
+	int val, len;
+	int err;
+
+	if (level != SOL_PPPOL2TP)
+		return udp_prot.getsockopt(sk, level, optname, optval, optlen);
+
+	if (get_user(len, (int __user *) optlen))
+		return -EFAULT;
+
+	len = min_t(unsigned int, len, sizeof(int));
+
+	if (len < 0)
+		return -EINVAL;
+
+	err = -ENOTCONN;
+	if (sk->sk_user_data == NULL)
+		goto end;
+
+	/* Get the session context */
+	err = -EBADF;
+	session = pppol2tp_sock_to_session(sk);
+	if (session == NULL)
+		goto end;
+
+	/* Special case: if session_id == 0x0000, treat as operation on tunnel */
+	if ((session->tunnel_addr.s_session == 0) &&
+	    (session->tunnel_addr.d_session == 0)) {
+		err = -EBADF;
+		tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+		if (tunnel == NULL)
+			goto end;
+
+		err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val);
+	} else
+		err = pppol2tp_session_getsockopt(sk, session, optname, &val);
+
+	err = -EFAULT;
+	if (put_user(len, (int __user *) optlen))
+		goto end;
+
+	if (copy_to_user((void __user *) optval, &val, len))
+		goto end;
+
+	err = 0;
+end:
+	return err;
+}
+
+/*****************************************************************************
+ * /proc filesystem for debug
+ *****************************************************************************/
+
+#ifdef CONFIG_PROC_FS
+
+#include <linux/seq_file.h>
+
+struct pppol2tp_seq_data {
+	struct pppol2tp_tunnel *tunnel; /* current tunnel */
+	struct pppol2tp_session *session; /* NULL means get first session in tunnel */
+};
+
+static struct pppol2tp_session *next_session(struct pppol2tp_tunnel *tunnel, struct pppol2tp_session *curr)
+{
+	struct pppol2tp_session *session = NULL;
+	struct hlist_node *walk;
+	int found = 0;
+	int next = 0;
+	int i;
+
+	read_lock(&tunnel->hlist_lock);
+	for (i = 0; i < PPPOL2TP_HASH_SIZE; i++) {
+		hlist_for_each_entry(session, walk, &tunnel->session_hlist[i], hlist) {
+			if (curr == NULL) {
+				found = 1;
+				goto out;
+			}
+			if (session == curr) {
+				next = 1;
+				continue;
+			}
+			if (next) {
+				found = 1;
+				goto out;
+			}
+		}
+	}
+out:
+	read_unlock(&tunnel->hlist_lock);
+	if (!found)
+		session = NULL;
+
+	return session;
+}
+
+static struct pppol2tp_tunnel *next_tunnel(struct pppol2tp_tunnel *curr)
+{
+	struct pppol2tp_tunnel *tunnel = NULL;
+
+	read_lock(&pppol2tp_tunnel_list_lock);
+	if (list_is_last(&curr->list, &pppol2tp_tunnel_list)) {
+		goto out;
+	}
+	tunnel = list_entry(curr->list.next, struct pppol2tp_tunnel, list);
+out:
+	read_unlock(&pppol2tp_tunnel_list_lock);
+
+	return tunnel;
+}
+
+static void *pppol2tp_seq_start(struct seq_file *m, loff_t *offs)
+{
+	struct pppol2tp_seq_data *pd = SEQ_START_TOKEN;
+	loff_t pos = *offs;
+
+	if (!pos)
+		goto out;
+
+	BUG_ON(m->private == NULL);
+	pd = m->private;
+
+	if (pd->tunnel == NULL) {
+		if (!list_empty(&pppol2tp_tunnel_list))
+			pd->tunnel = list_entry(pppol2tp_tunnel_list.next, struct pppol2tp_tunnel, list);
+	} else {
+		pd->session = next_session(pd->tunnel, pd->session);
+		if (pd->session == NULL) {
+			pd->tunnel = next_tunnel(pd->tunnel);
+		}
+	}
+
+	/* NULL tunnel and session indicates end of list */
+	if ((pd->tunnel == NULL) && (pd->session == NULL))
+		pd = NULL;
+
+out:
+	return pd;
+}
+
+static void *pppol2tp_seq_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	(*pos)++;
+	return NULL;
+}
+
+static void pppol2tp_seq_stop(struct seq_file *p, void *v)
+{
+	/* nothing to do */
+}
+
+static void pppol2tp_seq_tunnel_show(struct seq_file *m, void *v)
+{
+	struct pppol2tp_tunnel *tunnel = v;
+
+	seq_printf(m, "\nTUNNEL '%s', %c %d\n",
+		   tunnel->name,
+		   (tunnel == tunnel->sock->sk_user_data) ? 'Y':'N',
+		   atomic_read(&tunnel->ref_count) - 1);
+	seq_printf(m, " %08x %llu/%llu/%llu %llu/%llu/%llu\n",
+		   tunnel->debug,
+		   tunnel->stats.tx_packets, tunnel->stats.tx_bytes,
+		   tunnel->stats.tx_errors,
+		   tunnel->stats.rx_packets, tunnel->stats.rx_bytes,
+		   tunnel->stats.rx_errors);
+}
+
+static void pppol2tp_seq_session_show(struct seq_file *m, void *v)
+{
+	struct pppol2tp_session *session = v;
+
+	seq_printf(m, "  SESSION '%s' %08X/%d %04X/%04X -> "
+		   "%04X/%04X %d %c\n",
+		   session->name,
+		   ntohl(session->tunnel_addr.addr.sin_addr.s_addr),
+		   ntohs(session->tunnel_addr.addr.sin_port),
+		   session->tunnel_addr.s_tunnel,
+		   session->tunnel_addr.s_session,
+		   session->tunnel_addr.d_tunnel,
+		   session->tunnel_addr.d_session,
+		   session->sock->sk_state,
+		   (session == session->sock->sk_user_data) ?
+		   'Y' : 'N');
+	seq_printf(m, "   %d/%d/%c/%c/%s %08x %u\n",
+		   session->mtu, session->mru,
+		   session->recv_seq ? 'R' : '-',
+		   session->send_seq ? 'S' : '-',
+		   session->lns_mode ? "LNS" : "LAC",
+		   session->debug,
+		   jiffies_to_msecs(session->reorder_timeout));
+	seq_printf(m, "   %hu/%hu %llu/%llu/%llu %llu/%llu/%llu\n",
+		   session->nr, session->ns,
+		   session->stats.tx_packets,
+		   session->stats.tx_bytes,
+		   session->stats.tx_errors,
+		   session->stats.rx_packets,
+		   session->stats.rx_bytes,
+		   session->stats.rx_errors);
+}
+
+static int pppol2tp_seq_show(struct seq_file *m, void *v)
+{
+	struct pppol2tp_seq_data *pd = v;
+
+	/* display header on line 1 */
+	if (v == SEQ_START_TOKEN) {
+		seq_puts(m, "PPPoL2TP driver info, " PPPOL2TP_DRV_VERSION "\n");
+		seq_puts(m, "TUNNEL name, user-data-ok session-count\n");
+		seq_puts(m, " debug tx-pkts/bytes/errs rx-pkts/bytes/errs\n");
+		seq_puts(m, "  SESSION name, addr/port src-tid/sid "
+			 "dest-tid/sid state user-data-ok\n");
+		seq_puts(m, "   mtu/mru/rcvseq/sendseq/lns debug reorderto\n");
+		seq_puts(m, "   nr/ns tx-pkts/bytes/errs rx-pkts/bytes/errs\n");
+		goto out;
+	}
+
+	/* Show the tunnel or session context.
+	 */
+	if (pd->session == NULL)
+		pppol2tp_seq_tunnel_show(m, pd->tunnel);
+	else
+		pppol2tp_seq_session_show(m, pd->session);
+
+out:
+	return 0;
+}
+
+static struct seq_operations pppol2tp_seq_ops = {
+	.start		= pppol2tp_seq_start,
+	.next		= pppol2tp_seq_next,
+	.stop		= pppol2tp_seq_stop,
+	.show		= pppol2tp_seq_show,
+};
+
+/* Called when our /proc file is opened. We allocate data for use when
+ * iterating our tunnel / session contexts and store it in the private
+ * data of the seq_file.
+ */
+static int pppol2tp_proc_open(struct inode *inode, struct file *file)
+{
+	struct seq_file *m;
+	struct pppol2tp_seq_data *pd;
+	int ret = 0;
+
+	ret = seq_open(file, &pppol2tp_seq_ops);
+	if (ret < 0)
+		goto out;
+
+	m = file->private_data;
+
+	/* Allocate and fill our proc_data for access later */
+	ret = -ENOMEM;
+	m->private = kzalloc(sizeof(struct pppol2tp_seq_data), GFP_KERNEL);
+	if (m->private == NULL)
+		goto out;
+
+	pd = m->private;
+	ret = 0;
+
+out:
+	return ret;
+}
+
+/* Called when /proc file access completes.
+ */
+static int pppol2tp_proc_release(struct inode *inode, struct file *file)
+{
+	struct seq_file *m = (struct seq_file *)file->private_data;
+
+	kfree(m->private);
+	m->private = NULL;
+
+	return seq_release(inode, file);
+}
+
+static struct file_operations pppol2tp_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= pppol2tp_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= pppol2tp_proc_release,
+};
+
+static struct proc_dir_entry *pppol2tp_proc;
+
+#endif /* CONFIG_PROC_FS */
+
+/*****************************************************************************
+ * Init and cleanup
+ *****************************************************************************/
+
+static struct proto_ops pppol2tp_ops = {
+	.family		= AF_PPPOX,
+	.owner		= THIS_MODULE,
+	.release	= pppol2tp_release,
+	.bind		= sock_no_bind,
+	.connect	= pppol2tp_connect,
+	.socketpair	= sock_no_socketpair,
+	.accept		= sock_no_accept,
+	.getname	= pppol2tp_getname,
+	.poll		= datagram_poll,
+	.listen		= sock_no_listen,
+	.shutdown	= sock_no_shutdown,
+	.setsockopt	= pppol2tp_setsockopt,
+	.getsockopt	= pppol2tp_getsockopt,
+	.sendmsg	= pppol2tp_sendmsg,
+	.recvmsg	= pppol2tp_recvmsg,
+	.mmap		= sock_no_mmap,
+	.ioctl		= pppox_ioctl,
+};
+
+static struct pppox_proto pppol2tp_proto = {
+	.create		= pppol2tp_create,
+	.ioctl		= pppol2tp_ioctl
+};
+
+static int __init pppol2tp_init(void)
+{
+	int err;
+
+	err = proto_register(&pppol2tp_sk_proto, 0);
+	if (err)
+		goto out;
+	err = register_pppox_proto(PX_PROTO_OL2TP, &pppol2tp_proto);
+	if (err)
+		goto out_unregister_pppol2tp_proto;
+
+#ifdef CONFIG_PROC_FS
+	pppol2tp_proc = create_proc_entry("pppol2tp", 0, proc_net);
+	if (!pppol2tp_proc) {
+		err = -ENOMEM;
+		goto out_unregister_pppox_proto;
+	}
+	pppol2tp_proc->proc_fops = &pppol2tp_proc_fops;
+#endif /* CONFIG_PROC_FS */
+	printk(KERN_INFO "PPPoL2TP kernel driver, %s\n",
+	       PPPOL2TP_DRV_VERSION);
+
+out:
+	return err;
+
+out_unregister_pppox_proto:
+	unregister_pppox_proto(PX_PROTO_OL2TP);
+out_unregister_pppol2tp_proto:
+	proto_unregister(&pppol2tp_sk_proto);
+	goto out;
+}
+
+static void __exit pppol2tp_exit(void)
+{
+	unregister_pppox_proto(PX_PROTO_OL2TP);
+
+#ifdef CONFIG_PROC_FS
+	remove_proc_entry("pppol2tp", proc_net);
+#endif
+	proto_unregister(&pppol2tp_sk_proto);
+}
+
+module_init(pppol2tp_init);
+module_exit(pppol2tp_exit);
+
+MODULE_AUTHOR("Martijn van Oosterhout <kleptog@svana.org>,"
+	      "James Chapman <jchapman@katalix.com>");
+MODULE_DESCRIPTION("PPP over L2TP over UDP");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(PPPOL2TP_DRV_VERSION);
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
new file mode 100644
index 000000000000..08d25066f051
--- /dev/null
+++ b/drivers/net/ps3_gelic_net.c
@@ -0,0 +1,1576 @@
+/*
+ *  PS3 gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ *
+ * This file is based on: spider_net.c
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+#include <linux/dma-mapping.h>
+#include <net/checksum.h>
+#include <asm/firmware.h>
+#include <asm/ps3.h>
+#include <asm/lv1call.h>
+
+#include "ps3_gelic_net.h"
+
+#define DRV_NAME "Gelic Network Driver"
+#define DRV_VERSION "1.0"
+
+MODULE_AUTHOR("SCE Inc.");
+MODULE_DESCRIPTION("Gelic Network driver");
+MODULE_LICENSE("GPL");
+
+static inline struct device *ctodev(struct gelic_net_card *card)
+{
+	return &card->dev->core;
+}
+static inline unsigned int bus_id(struct gelic_net_card *card)
+{
+	return card->dev->bus_id;
+}
+static inline unsigned int dev_id(struct gelic_net_card *card)
+{
+	return card->dev->dev_id;
+}
+
+/* set irq_mask */
+static int gelic_net_set_irq_mask(struct gelic_net_card *card, u64 mask)
+{
+	int status;
+
+	status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
+					    mask, 0);
+	if (status)
+		dev_info(ctodev(card),
+			 "lv1_net_set_interrupt_mask failed %d\n", status);
+	return status;
+}
+static inline void gelic_net_rx_irq_on(struct gelic_net_card *card)
+{
+	gelic_net_set_irq_mask(card, card->ghiintmask | GELIC_NET_RXINT);
+}
+static inline void gelic_net_rx_irq_off(struct gelic_net_card *card)
+{
+	gelic_net_set_irq_mask(card, card->ghiintmask & ~GELIC_NET_RXINT);
+}
+/**
+ * gelic_net_get_descr_status -- returns the status of a descriptor
+ * @descr: descriptor to look at
+ *
+ * returns the status as in the dmac_cmd_status field of the descriptor
+ */
+static enum gelic_net_descr_status
+gelic_net_get_descr_status(struct gelic_net_descr *descr)
+{
+	u32 cmd_status;
+
+	cmd_status = descr->dmac_cmd_status;
+	cmd_status >>= GELIC_NET_DESCR_IND_PROC_SHIFT;
+	return cmd_status;
+}
+
+/**
+ * gelic_net_set_descr_status -- sets the status of a descriptor
+ * @descr: descriptor to change
+ * @status: status to set in the descriptor
+ *
+ * changes the status to the specified value. Doesn't change other bits
+ * in the status
+ */
+static void gelic_net_set_descr_status(struct gelic_net_descr *descr,
+				       enum gelic_net_descr_status status)
+{
+	u32 cmd_status;
+
+	/* read the status */
+	cmd_status = descr->dmac_cmd_status;
+	/* clean the upper 4 bits */
+	cmd_status &= GELIC_NET_DESCR_IND_PROC_MASKO;
+	/* add the status to it */
+	cmd_status |= ((u32)status) << GELIC_NET_DESCR_IND_PROC_SHIFT;
+	/* and write it back */
+	descr->dmac_cmd_status = cmd_status;
+	/*
+	 * dma_cmd_status field is used to indicate whether the descriptor
+	 * is valid or not.
+	 * Usually caller of this function wants to inform that to the
+	 * hardware, so we assure here the hardware sees the change.
+	 */
+	wmb();
+}
+
+/**
+ * gelic_net_free_chain - free descriptor chain
+ * @card: card structure
+ * @descr_in: address of desc
+ */
+static void gelic_net_free_chain(struct gelic_net_card *card,
+				 struct gelic_net_descr *descr_in)
+{
+	struct gelic_net_descr *descr;
+
+	for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
+		dma_unmap_single(ctodev(card), descr->bus_addr,
+				 GELIC_NET_DESCR_SIZE, DMA_BIDIRECTIONAL);
+		descr->bus_addr = 0;
+	}
+}
+
+/**
+ * gelic_net_init_chain - links descriptor chain
+ * @card: card structure
+ * @chain: address of chain
+ * @start_descr: address of descriptor array
+ * @no: number of descriptors
+ *
+ * we manage a circular list that mirrors the hardware structure,
+ * except that the hardware uses bus addresses.
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_init_chain(struct gelic_net_card *card,
+				struct gelic_net_descr_chain *chain,
+				struct gelic_net_descr *start_descr, int no)
+{
+	int i;
+	struct gelic_net_descr *descr;
+
+	descr = start_descr;
+	memset(descr, 0, sizeof(*descr) * no);
+
+	/* set up the hardware pointers in each descriptor */
+	for (i = 0; i < no; i++, descr++) {
+		gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+		descr->bus_addr =
+			dma_map_single(ctodev(card), descr,
+				       GELIC_NET_DESCR_SIZE,
+				       DMA_BIDIRECTIONAL);
+
+		if (!descr->bus_addr)
+			goto iommu_error;
+
+		descr->next = descr + 1;
+		descr->prev = descr - 1;
+	}
+	/* make them as ring */
+	(descr - 1)->next = start_descr;
+	start_descr->prev = (descr - 1);
+
+	/* chain bus addr of hw descriptor */
+	descr = start_descr;
+	for (i = 0; i < no; i++, descr++) {
+		descr->next_descr_addr = descr->next->bus_addr;
+	}
+
+	chain->head = start_descr;
+	chain->tail = start_descr;
+
+	/* do not chain last hw descriptor */
+	(descr - 1)->next_descr_addr = 0;
+
+	return 0;
+
+iommu_error:
+	for (i--, descr--; 0 <= i; i--, descr--)
+		if (descr->bus_addr)
+			dma_unmap_single(ctodev(card), descr->bus_addr,
+					 GELIC_NET_DESCR_SIZE,
+					 DMA_BIDIRECTIONAL);
+	return -ENOMEM;
+}
+
+/**
+ * gelic_net_prepare_rx_descr - reinitializes a rx descriptor
+ * @card: card structure
+ * @descr: descriptor to re-init
+ *
+ * return 0 on succes, <0 on failure
+ *
+ * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
+ * Activate the descriptor state-wise
+ */
+static int gelic_net_prepare_rx_descr(struct gelic_net_card *card,
+				      struct gelic_net_descr *descr)
+{
+	int offset;
+	unsigned int bufsize;
+
+	if (gelic_net_get_descr_status(descr) !=  GELIC_NET_DESCR_NOT_IN_USE) {
+		dev_info(ctodev(card), "%s: ERROR status \n", __func__);
+	}
+	/* we need to round up the buffer size to a multiple of 128 */
+	bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
+
+	/* and we need to have it 128 byte aligned, therefore we allocate a
+	 * bit more */
+	descr->skb = netdev_alloc_skb(card->netdev,
+		bufsize + GELIC_NET_RXBUF_ALIGN - 1);
+	if (!descr->skb) {
+		descr->buf_addr = 0; /* tell DMAC don't touch memory */
+		dev_info(ctodev(card),
+			 "%s:allocate skb failed !!\n", __func__);
+		return -ENOMEM;
+	}
+	descr->buf_size = bufsize;
+	descr->dmac_cmd_status = 0;
+	descr->result_size = 0;
+	descr->valid_size = 0;
+	descr->data_error = 0;
+
+	offset = ((unsigned long)descr->skb->data) &
+		(GELIC_NET_RXBUF_ALIGN - 1);
+	if (offset)
+		skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
+	/* io-mmu-map the skb */
+	descr->buf_addr = dma_map_single(ctodev(card), descr->skb->data,
+					 GELIC_NET_MAX_MTU,
+					 DMA_FROM_DEVICE);
+	if (!descr->buf_addr) {
+		dev_kfree_skb_any(descr->skb);
+		descr->skb = NULL;
+		dev_info(ctodev(card),
+			 "%s:Could not iommu-map rx buffer\n", __func__);
+		gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+		return -ENOMEM;
+	} else {
+		gelic_net_set_descr_status(descr, GELIC_NET_DESCR_CARDOWNED);
+		return 0;
+	}
+}
+
+/**
+ * gelic_net_release_rx_chain - free all skb of rx descr
+ * @card: card structure
+ *
+ */
+static void gelic_net_release_rx_chain(struct gelic_net_card *card)
+{
+	struct gelic_net_descr *descr = card->rx_chain.head;
+
+	do {
+		if (descr->skb) {
+			dma_unmap_single(ctodev(card),
+					 descr->buf_addr,
+					 descr->skb->len,
+					 DMA_FROM_DEVICE);
+			descr->buf_addr = 0;
+			dev_kfree_skb_any(descr->skb);
+			descr->skb = NULL;
+			descr->dmac_cmd_status = GELIC_NET_DESCR_NOT_IN_USE;
+		}
+		descr = descr->next;
+	} while (descr != card->rx_chain.head);
+}
+
+/**
+ * gelic_net_fill_rx_chain - fills descriptors/skbs in the rx chains
+ * @card: card structure
+ *
+ * fills all descriptors in the rx chain: allocates skbs
+ * and iommu-maps them.
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_fill_rx_chain(struct gelic_net_card *card)
+{
+	struct gelic_net_descr *descr = card->rx_chain.head;
+	int ret;
+
+	do {
+		if (!descr->skb) {
+			ret = gelic_net_prepare_rx_descr(card, descr);
+			if (ret)
+				goto rewind;
+		}
+		descr = descr->next;
+	} while (descr != card->rx_chain.head);
+
+	return 0;
+rewind:
+	gelic_net_release_rx_chain(card);
+	return ret;
+}
+
+/**
+ * gelic_net_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
+ * @card: card structure
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_alloc_rx_skbs(struct gelic_net_card *card)
+{
+	struct gelic_net_descr_chain *chain;
+	int ret;
+	chain = &card->rx_chain;
+	ret = gelic_net_fill_rx_chain(card);
+	chain->head = card->rx_top->prev; /* point to the last */
+	return ret;
+}
+
+/**
+ * gelic_net_release_tx_descr - processes a used tx descriptor
+ * @card: card structure
+ * @descr: descriptor to release
+ *
+ * releases a used tx descriptor (unmapping, freeing of skb)
+ */
+static void gelic_net_release_tx_descr(struct gelic_net_card *card,
+			    struct gelic_net_descr *descr)
+{
+	struct sk_buff *skb;
+
+
+	if (descr->data_status & (1 << GELIC_NET_TXDESC_TAIL)) {
+		/* 2nd descriptor */
+		skb = descr->skb;
+		dma_unmap_single(ctodev(card), descr->buf_addr, skb->len,
+				 DMA_TO_DEVICE);
+		dev_kfree_skb_any(skb);
+	} else {
+		dma_unmap_single(ctodev(card), descr->buf_addr,
+				 descr->buf_size, DMA_TO_DEVICE);
+	}
+
+	descr->buf_addr = 0;
+	descr->buf_size = 0;
+	descr->next_descr_addr = 0;
+	descr->result_size = 0;
+	descr->valid_size = 0;
+	descr->data_status = 0;
+	descr->data_error = 0;
+	descr->skb = NULL;
+
+	/* set descr status */
+	descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOT_IN_USE;
+}
+
+/**
+ * gelic_net_release_tx_chain - processes sent tx descriptors
+ * @card: adapter structure
+ * @stop: net_stop sequence
+ *
+ * releases the tx descriptors that gelic has finished with
+ */
+static void gelic_net_release_tx_chain(struct gelic_net_card *card, int stop)
+{
+	struct gelic_net_descr_chain *tx_chain;
+	enum gelic_net_descr_status status;
+	int release = 0;
+
+	for (tx_chain = &card->tx_chain;
+	     tx_chain->head != tx_chain->tail && tx_chain->tail;
+	     tx_chain->tail = tx_chain->tail->next) {
+		status = gelic_net_get_descr_status(tx_chain->tail);
+		switch (status) {
+		case GELIC_NET_DESCR_RESPONSE_ERROR:
+		case GELIC_NET_DESCR_PROTECTION_ERROR:
+		case GELIC_NET_DESCR_FORCE_END:
+			if (printk_ratelimit())
+				dev_info(ctodev(card),
+					 "%s: forcing end of tx descriptor " \
+					 "with status %x\n",
+					 __func__, status);
+			card->netdev_stats.tx_dropped++;
+			break;
+
+		case GELIC_NET_DESCR_COMPLETE:
+			card->netdev_stats.tx_packets++;
+			card->netdev_stats.tx_bytes +=
+				tx_chain->tail->skb->len;
+			break;
+
+		case GELIC_NET_DESCR_CARDOWNED:
+			/* pending tx request */
+		default:
+			/* any other value (== GELIC_NET_DESCR_NOT_IN_USE) */
+			goto out;
+		}
+		gelic_net_release_tx_descr(card, tx_chain->tail);
+		release = 1;
+	}
+out:
+	if (!stop && release)
+		netif_wake_queue(card->netdev);
+}
+
+/**
+ * gelic_net_set_multi - sets multicast addresses and promisc flags
+ * @netdev: interface device structure
+ *
+ * gelic_net_set_multi configures multicast addresses as needed for the
+ * netdev interface. It also sets up multicast, allmulti and promisc
+ * flags appropriately
+ */
+static void gelic_net_set_multi(struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+	struct dev_mc_list *mc;
+	unsigned int i;
+	uint8_t *p;
+	u64 addr;
+	int status;
+
+	/* clear all multicast address */
+	status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
+						  0, 1);
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_remove_multicast_address failed %d\n",
+			status);
+	/* set broadcast address */
+	status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
+					       GELIC_NET_BROADCAST_ADDR, 0);
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_add_multicast_address failed, %d\n",
+			status);
+
+	if (netdev->flags & IFF_ALLMULTI
+		|| netdev->mc_count > GELIC_NET_MC_COUNT_MAX) { /* list max */
+		status = lv1_net_add_multicast_address(bus_id(card),
+						       dev_id(card),
+						       0, 1);
+		if (status)
+			dev_err(ctodev(card),
+				"lv1_net_add_multicast_address failed, %d\n",
+				status);
+		return;
+	}
+
+	/* set multicast address */
+	for (mc = netdev->mc_list; mc; mc = mc->next) {
+		addr = 0;
+		p = mc->dmi_addr;
+		for (i = 0; i < ETH_ALEN; i++) {
+			addr <<= 8;
+			addr |= *p++;
+		}
+		status = lv1_net_add_multicast_address(bus_id(card),
+						       dev_id(card),
+						       addr, 0);
+		if (status)
+			dev_err(ctodev(card),
+				"lv1_net_add_multicast_address failed, %d\n",
+				status);
+	}
+}
+
+/**
+ * gelic_net_enable_rxdmac - enables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_net_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
+ * in the GDADMACCNTR register
+ */
+static inline void gelic_net_enable_rxdmac(struct gelic_net_card *card)
+{
+	int status;
+
+	status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
+				card->rx_chain.tail->bus_addr, 0);
+	if (status)
+		dev_info(ctodev(card),
+			 "lv1_net_start_rx_dma failed, status=%d\n", status);
+}
+
+/**
+ * gelic_net_disable_rxdmac - disables the receive DMA controller
+ * @card: card structure
+ *
+ * gelic_net_disable_rxdmac terminates processing on the DMA controller by
+ * turing off DMA and issueing a force end
+ */
+static inline void gelic_net_disable_rxdmac(struct gelic_net_card *card)
+{
+	int status;
+
+	/* this hvc blocks until the DMA in progress really stopped */
+	status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0);
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_stop_rx_dma faild, %d\n", status);
+}
+
+/**
+ * gelic_net_disable_txdmac - disables the transmit DMA controller
+ * @card: card structure
+ *
+ * gelic_net_disable_txdmac terminates processing on the DMA controller by
+ * turing off DMA and issueing a force end
+ */
+static inline void gelic_net_disable_txdmac(struct gelic_net_card *card)
+{
+	int status;
+
+	/* this hvc blocks until the DMA in progress really stopped */
+	status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0);
+	if (status)
+		dev_err(ctodev(card),
+			"lv1_net_stop_tx_dma faild, status=%d\n", status);
+}
+
+/**
+ * gelic_net_stop - called upon ifconfig down
+ * @netdev: interface device structure
+ *
+ * always returns 0
+ */
+static int gelic_net_stop(struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+
+	netif_poll_disable(netdev);
+	netif_stop_queue(netdev);
+
+	/* turn off DMA, force end */
+	gelic_net_disable_rxdmac(card);
+	gelic_net_disable_txdmac(card);
+
+	gelic_net_set_irq_mask(card, 0);
+
+	/* disconnect event port */
+	free_irq(card->netdev->irq, card->netdev);
+	ps3_sb_event_receive_port_destroy(card->dev, card->netdev->irq);
+	card->netdev->irq = NO_IRQ;
+
+	netif_carrier_off(netdev);
+
+	/* release chains */
+	gelic_net_release_tx_chain(card, 1);
+	gelic_net_release_rx_chain(card);
+
+	gelic_net_free_chain(card, card->tx_top);
+	gelic_net_free_chain(card, card->rx_top);
+
+	return 0;
+}
+
+/**
+ * gelic_net_get_next_tx_descr - returns the next available tx descriptor
+ * @card: device structure to get descriptor from
+ *
+ * returns the address of the next descriptor, or NULL if not available.
+ */
+static struct gelic_net_descr *
+gelic_net_get_next_tx_descr(struct gelic_net_card *card)
+{
+	if (!card->tx_chain.head)
+		return NULL;
+	/*  see if we can two consecutive free descrs */
+	if (card->tx_chain.tail != card->tx_chain.head->next &&
+	    gelic_net_get_descr_status(card->tx_chain.head) ==
+	    GELIC_NET_DESCR_NOT_IN_USE &&
+	    card->tx_chain.tail != card->tx_chain.head->next->next &&
+	    gelic_net_get_descr_status(card->tx_chain.head->next) ==
+	     GELIC_NET_DESCR_NOT_IN_USE )
+		return card->tx_chain.head;
+	else
+		return NULL;
+
+}
+
+/**
+ * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
+ * @descr: descriptor structure to fill out
+ * @skb: packet to consider
+ * @middle: middle of frame
+ *
+ * fills out the command and status field of the descriptor structure,
+ * depending on hardware checksum settings. This function assumes a wmb()
+ * has executed before.
+ */
+static void gelic_net_set_txdescr_cmdstat(struct gelic_net_descr *descr,
+					  struct sk_buff *skb, int middle)
+{
+	u32 eofr;
+
+	if (middle)
+		eofr = 0;
+	else
+		eofr = GELIC_NET_DMAC_CMDSTAT_END_FRAME;
+
+	if (skb->ip_summed != CHECKSUM_PARTIAL)
+		descr->dmac_cmd_status = GELIC_NET_DMAC_CMDSTAT_NOCS | eofr;
+	else {
+		/* is packet ip?
+		 * if yes: tcp? udp? */
+		if (skb->protocol == htons(ETH_P_IP)) {
+			if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+				descr->dmac_cmd_status =
+					GELIC_NET_DMAC_CMDSTAT_TCPCS | eofr;
+			else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
+				descr->dmac_cmd_status =
+					GELIC_NET_DMAC_CMDSTAT_UDPCS | eofr;
+			else	/*
+				 * the stack should checksum non-tcp and non-udp
+				 * packets on his own: NETIF_F_IP_CSUM
+				 */
+				descr->dmac_cmd_status =
+					GELIC_NET_DMAC_CMDSTAT_NOCS | eofr;
+		}
+	}
+}
+
+/**
+ * gelic_net_prepare_tx_descr_v - get dma address of skb_data
+ * @card: card structure
+ * @descr: descriptor structure
+ * @skb: packet to use
+ *
+ * returns 0 on success, <0 on failure.
+ *
+ */
+static int gelic_net_prepare_tx_descr_v(struct gelic_net_card *card,
+					struct gelic_net_descr *descr,
+					struct sk_buff *skb)
+{
+	dma_addr_t buf[2];
+	unsigned int vlan_len;
+
+	if (skb->len < GELIC_NET_VLAN_POS)
+		return -EINVAL;
+
+	memcpy(&descr->vlan, skb->data, GELIC_NET_VLAN_POS);
+	if (card->vlan_index != -1) {
+		descr->vlan.h_vlan_proto = htons(ETH_P_8021Q); /* vlan 0x8100*/
+		descr->vlan.h_vlan_TCI = htons(card->vlan_id[card->vlan_index]);
+		vlan_len = GELIC_NET_VLAN_POS + VLAN_HLEN; /* VLAN_HLEN=4 */
+	} else
+		vlan_len = GELIC_NET_VLAN_POS; /* no vlan tag */
+
+	/* first descr */
+	buf[0] = dma_map_single(ctodev(card), &descr->vlan,
+			     vlan_len, DMA_TO_DEVICE);
+
+	if (!buf[0]) {
+		dev_err(ctodev(card),
+			"dma map 1 failed (%p, %i). Dropping packet\n",
+			skb->data, vlan_len);
+		return -ENOMEM;
+	}
+
+	descr->buf_addr = buf[0];
+	descr->buf_size = vlan_len;
+	descr->skb = skb; /* not used */
+	descr->data_status = 0;
+	gelic_net_set_txdescr_cmdstat(descr, skb, 1); /* not the frame end */
+
+	/* second descr */
+	card->tx_chain.head = card->tx_chain.head->next;
+	descr->next_descr_addr = descr->next->bus_addr;
+	descr = descr->next;
+	if (gelic_net_get_descr_status(descr) != GELIC_NET_DESCR_NOT_IN_USE)
+		/* XXX will be removed */
+		dev_err(ctodev(card), "descr is not free!\n");
+
+	buf[1] = dma_map_single(ctodev(card), skb->data + GELIC_NET_VLAN_POS,
+			     skb->len - GELIC_NET_VLAN_POS,
+			     DMA_TO_DEVICE);
+
+	if (!buf[1]) {
+		dev_err(ctodev(card),
+			"dma map 2 failed (%p, %i). Dropping packet\n",
+			skb->data + GELIC_NET_VLAN_POS,
+			skb->len - GELIC_NET_VLAN_POS);
+		dma_unmap_single(ctodev(card), buf[0], vlan_len,
+				 DMA_TO_DEVICE);
+		return -ENOMEM;
+	}
+
+	descr->buf_addr = buf[1];
+	descr->buf_size = skb->len - GELIC_NET_VLAN_POS;
+	descr->skb = skb;
+	descr->data_status = 0;
+	descr->next_descr_addr = 0; /* terminate hw descr */
+	gelic_net_set_txdescr_cmdstat(descr, skb, 0);
+
+	return 0;
+}
+
+/**
+ * gelic_net_kick_txdma - enables TX DMA processing
+ * @card: card structure
+ * @descr: descriptor address to enable TX processing at
+ *
+ */
+static int gelic_net_kick_txdma(struct gelic_net_card *card,
+				struct gelic_net_descr *descr)
+{
+	int status = -ENXIO;
+	int count = 10;
+
+	if (card->tx_dma_progress)
+		return 0;
+
+	if (gelic_net_get_descr_status(descr) == GELIC_NET_DESCR_CARDOWNED) {
+		card->tx_dma_progress = 1;
+		/* sometimes we need retry here */
+		while (count--) {
+			status = lv1_net_start_tx_dma(bus_id(card),
+						      dev_id(card),
+						      descr->bus_addr, 0);
+			if (!status)
+				break;
+		}
+		if (!count)
+			dev_info(ctodev(card), "lv1_net_start_txdma failed," \
+				"status=%d %#lx\n",
+				 status, card->irq_status);
+	}
+	return status;
+}
+
+/**
+ * gelic_net_xmit - transmits a frame over the device
+ * @skb: packet to send out
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+	struct gelic_net_descr *descr = NULL;
+	int result;
+	unsigned long flags;
+
+	spin_lock_irqsave(&card->tx_dma_lock, flags);
+
+	gelic_net_release_tx_chain(card, 0);
+	if (!skb)
+		goto kick;
+	descr = gelic_net_get_next_tx_descr(card);
+	if (!descr) {
+		netif_stop_queue(netdev);
+		spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+	result = gelic_net_prepare_tx_descr_v(card, descr, skb);
+
+	if (result)
+		goto error;
+
+	card->tx_chain.head = card->tx_chain.head->next;
+
+	if (descr->prev)
+		descr->prev->next_descr_addr = descr->bus_addr;
+kick:
+	/*
+	 * as hardware descriptor is modified in the above lines,
+	 * ensure that the hardware sees it
+	 */
+	wmb();
+	if (gelic_net_kick_txdma(card, card->tx_chain.tail))
+		goto error;
+
+	netdev->trans_start = jiffies;
+	spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+	return NETDEV_TX_OK;
+
+error:
+	card->netdev_stats.tx_dropped++;
+	spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+	return NETDEV_TX_LOCKED;
+}
+
+/**
+ * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
+ * @descr: descriptor to process
+ * @card: card structure
+ *
+ * iommu-unmaps the skb, fills out skb structure and passes the data to the
+ * stack. The descriptor state is not changed.
+ */
+static void gelic_net_pass_skb_up(struct gelic_net_descr *descr,
+				 struct gelic_net_card *card)
+{
+	struct sk_buff *skb;
+	struct net_device *netdev;
+	u32 data_status, data_error;
+
+	data_status = descr->data_status;
+	data_error = descr->data_error;
+	netdev = card->netdev;
+	/* unmap skb buffer */
+	skb = descr->skb;
+	dma_unmap_single(ctodev(card), descr->buf_addr, GELIC_NET_MAX_MTU,
+			 DMA_FROM_DEVICE);
+
+	skb_put(skb, descr->valid_size? descr->valid_size : descr->result_size);
+	if (!descr->valid_size)
+		dev_info(ctodev(card), "buffer full %x %x %x\n",
+			 descr->result_size, descr->buf_size,
+			 descr->dmac_cmd_status);
+
+	descr->skb = NULL;
+	/*
+	 * the card put 2 bytes vlan tag in front
+	 * of the ethernet frame
+	 */
+	skb_pull(skb, 2);
+	skb->protocol = eth_type_trans(skb, netdev);
+
+	/* checksum offload */
+	if (card->rx_csum) {
+		if ((data_status & GELIC_NET_DATA_STATUS_CHK_MASK) &&
+		    (!(data_error & GELIC_NET_DATA_ERROR_CHK_MASK)))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+		else
+			skb->ip_summed = CHECKSUM_NONE;
+	} else
+		skb->ip_summed = CHECKSUM_NONE;
+
+	/* update netdevice statistics */
+	card->netdev_stats.rx_packets++;
+	card->netdev_stats.rx_bytes += skb->len;
+
+	/* pass skb up to stack */
+	netif_receive_skb(skb);
+}
+
+/**
+ * gelic_net_decode_one_descr - processes an rx descriptor
+ * @card: card structure
+ *
+ * returns 1 if a packet has been sent to the stack, otherwise 0
+ *
+ * processes an rx descriptor by iommu-unmapping the data buffer and passing
+ * the packet up to the stack
+ */
+static int gelic_net_decode_one_descr(struct gelic_net_card *card)
+{
+	enum gelic_net_descr_status status;
+	struct gelic_net_descr_chain *chain = &card->rx_chain;
+	struct gelic_net_descr *descr = chain->tail;
+	int dmac_chain_ended;
+
+	status = gelic_net_get_descr_status(descr);
+	/* is this descriptor terminated with next_descr == NULL? */
+	dmac_chain_ended =
+		descr->dmac_cmd_status & GELIC_NET_DMAC_CMDSTAT_RXDCEIS;
+
+	if (status == GELIC_NET_DESCR_CARDOWNED)
+		return 0;
+
+	if (status == GELIC_NET_DESCR_NOT_IN_USE) {
+		dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
+		return 0;
+	}
+
+	if ((status == GELIC_NET_DESCR_RESPONSE_ERROR) ||
+	    (status == GELIC_NET_DESCR_PROTECTION_ERROR) ||
+	    (status == GELIC_NET_DESCR_FORCE_END)) {
+		dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
+			 status);
+		card->netdev_stats.rx_dropped++;
+		goto refill;
+	}
+
+	if ((status != GELIC_NET_DESCR_COMPLETE) &&
+	    (status != GELIC_NET_DESCR_FRAME_END)) {
+		dev_dbg(ctodev(card), "RX descriptor with state %x\n",
+			status);
+		goto refill;
+	}
+
+	/* ok, we've got a packet in descr */
+	gelic_net_pass_skb_up(descr, card); /* 1: skb_up sccess */
+
+refill:
+	descr->next_descr_addr = 0; /* unlink the descr */
+
+	/* change the descriptor state: */
+	gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
+
+	/* refill one desc
+	 * FIXME: this can fail, but for now, just leave this
+	 * descriptor without skb
+	 */
+	gelic_net_prepare_rx_descr(card, descr);
+	chain->head = descr;
+	chain->tail = descr->next;
+	descr->prev->next_descr_addr = descr->bus_addr;
+
+	if (dmac_chain_ended) {
+		gelic_net_enable_rxdmac(card);
+		dev_dbg(ctodev(card), "reenable rx dma\n");
+	}
+
+	return 1;
+}
+
+/**
+ * gelic_net_poll - NAPI poll function called by the stack to return packets
+ * @netdev: interface device structure
+ * @budget: number of packets we can pass to the stack at most
+ *
+ * returns 0 if no more packets available to the driver/stack. Returns 1,
+ * if the quota is exceeded, but the driver has still packets.
+ *
+ */
+static int gelic_net_poll(struct net_device *netdev, int *budget)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+	int packets_to_do, packets_done = 0;
+	int no_more_packets = 0;
+
+	packets_to_do = min(*budget, netdev->quota);
+
+	while (packets_to_do) {
+		if (gelic_net_decode_one_descr(card)) {
+			packets_done++;
+			packets_to_do--;
+		} else {
+			/* no more packets for the stack */
+			no_more_packets = 1;
+			break;
+		}
+	}
+	netdev->quota -= packets_done;
+	*budget -= packets_done;
+	if (no_more_packets) {
+		netif_rx_complete(netdev);
+		gelic_net_rx_irq_on(card);
+		return 0;
+	} else
+		return 1;
+}
+
+/**
+ * gelic_net_get_stats - get interface statistics
+ * @netdev: interface device structure
+ *
+ * returns the interface statistics residing in the gelic_net_card struct
+ */
+static struct net_device_stats *gelic_net_get_stats(struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+
+	return &card->netdev_stats;
+}
+
+/**
+ * gelic_net_change_mtu - changes the MTU of an interface
+ * @netdev: interface device structure
+ * @new_mtu: new MTU value
+ *
+ * returns 0 on success, <0 on failure
+ */
+static int gelic_net_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	/* no need to re-alloc skbs or so -- the max mtu is about 2.3k
+	 * and mtu is outbound only anyway */
+	if ((new_mtu < GELIC_NET_MIN_MTU) ||
+	    (new_mtu > GELIC_NET_MAX_MTU)) {
+		return -EINVAL;
+	}
+	netdev->mtu = new_mtu;
+	return 0;
+}
+
+/**
+ * gelic_net_interrupt - event handler for gelic_net
+ */
+static irqreturn_t gelic_net_interrupt(int irq, void *ptr)
+{
+	unsigned long flags;
+	struct net_device *netdev = ptr;
+	struct gelic_net_card *card = netdev_priv(netdev);
+	u64 status;
+
+	status = card->irq_status;
+
+	if (!status)
+		return IRQ_NONE;
+
+	if (status & GELIC_NET_RXINT) {
+		gelic_net_rx_irq_off(card);
+		netif_rx_schedule(netdev);
+	}
+
+	if (status & GELIC_NET_TXINT) {
+		spin_lock_irqsave(&card->tx_dma_lock, flags);
+		card->tx_dma_progress = 0;
+		spin_unlock_irqrestore(&card->tx_dma_lock, flags);
+		/* start pending DMA */
+		gelic_net_xmit(NULL, netdev);
+	}
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * gelic_net_poll_controller - artificial interrupt for netconsole etc.
+ * @netdev: interface device structure
+ *
+ * see Documentation/networking/netconsole.txt
+ */
+static void gelic_net_poll_controller(struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+
+	gelic_net_set_irq_mask(card, 0);
+	gelic_net_interrupt(netdev->irq, netdev);
+	gelic_net_set_irq_mask(card, card->ghiintmask);
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * gelic_net_open_device - open device and map dma region
+ * @card: card structure
+ */
+static int gelic_net_open_device(struct gelic_net_card *card)
+{
+	int result;
+
+	result = ps3_sb_event_receive_port_setup(card->dev, PS3_BINDING_CPU_ANY,
+		&card->netdev->irq);
+
+	if (result) {
+		dev_info(ctodev(card),
+			 "%s:%d: gelic_net_open_device failed (%d)\n",
+			 __func__, __LINE__, result);
+		result = -EPERM;
+		goto fail_alloc_irq;
+	}
+
+	result = request_irq(card->netdev->irq, gelic_net_interrupt,
+			     IRQF_DISABLED, "gelic network", card->netdev);
+
+	if (result) {
+		dev_info(ctodev(card), "%s:%d: request_irq failed (%d)\n",
+			__func__, __LINE__, result);
+		goto fail_request_irq;
+	}
+
+	return 0;
+
+fail_request_irq:
+	ps3_sb_event_receive_port_destroy(card->dev, card->netdev->irq);
+	card->netdev->irq = NO_IRQ;
+fail_alloc_irq:
+	return result;
+}
+
+
+/**
+ * gelic_net_open - called upon ifonfig up
+ * @netdev: interface device structure
+ *
+ * returns 0 on success, <0 on failure
+ *
+ * gelic_net_open allocates all the descriptors and memory needed for
+ * operation, sets up multicast list and enables interrupts
+ */
+static int gelic_net_open(struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+
+	dev_dbg(ctodev(card), " -> %s:%d\n", __func__, __LINE__);
+
+	gelic_net_open_device(card);
+
+	if (gelic_net_init_chain(card, &card->tx_chain,
+			card->descr, GELIC_NET_TX_DESCRIPTORS))
+		goto alloc_tx_failed;
+	if (gelic_net_init_chain(card, &card->rx_chain,
+				 card->descr + GELIC_NET_RX_DESCRIPTORS,
+				 GELIC_NET_RX_DESCRIPTORS))
+		goto alloc_rx_failed;
+
+	/* head of chain */
+	card->tx_top = card->tx_chain.head;
+	card->rx_top = card->rx_chain.head;
+	dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
+		card->rx_top, card->tx_top, sizeof(struct gelic_net_descr),
+		GELIC_NET_RX_DESCRIPTORS);
+	/* allocate rx skbs */
+	if (gelic_net_alloc_rx_skbs(card))
+		goto alloc_skbs_failed;
+
+	card->tx_dma_progress = 0;
+	card->ghiintmask = GELIC_NET_RXINT | GELIC_NET_TXINT;
+
+	gelic_net_set_irq_mask(card, card->ghiintmask);
+	gelic_net_enable_rxdmac(card);
+
+	netif_start_queue(netdev);
+	netif_carrier_on(netdev);
+	netif_poll_enable(netdev);
+
+	return 0;
+
+alloc_skbs_failed:
+	gelic_net_free_chain(card, card->rx_top);
+alloc_rx_failed:
+	gelic_net_free_chain(card, card->tx_top);
+alloc_tx_failed:
+	return -ENOMEM;
+}
+
+#ifdef GELIC_NET_ETHTOOL
+static void gelic_net_get_drvinfo (struct net_device *netdev,
+				   struct ethtool_drvinfo *info)
+{
+	strncpy(info->driver, DRV_NAME, sizeof(info->driver) - 1);
+	strncpy(info->version, DRV_VERSION, sizeof(info->version) - 1);
+}
+
+static int gelic_net_get_settings(struct net_device *netdev,
+				  struct ethtool_cmd *cmd)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+	int status;
+	u64 v1, v2;
+	int speed, duplex;
+
+	speed = duplex = -1;
+	status = lv1_net_control(bus_id(card), dev_id(card),
+			GELIC_NET_GET_ETH_PORT_STATUS, GELIC_NET_PORT, 0, 0,
+			&v1, &v2);
+	if (status) {
+		/* link down */
+	} else {
+		if (v1 & GELIC_NET_FULL_DUPLEX) {
+			duplex = DUPLEX_FULL;
+		} else {
+			duplex = DUPLEX_HALF;
+		}
+
+		if (v1 & GELIC_NET_SPEED_10 ) {
+			speed = SPEED_10;
+		} else if (v1 & GELIC_NET_SPEED_100) {
+			speed = SPEED_100;
+		} else if (v1 & GELIC_NET_SPEED_1000) {
+			speed = SPEED_1000;
+		}
+	}
+	cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg |
+			SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+			SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+			SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
+	cmd->advertising = cmd->supported;
+	cmd->speed = speed;
+	cmd->duplex = duplex;
+	cmd->autoneg = AUTONEG_ENABLE; /* always enabled */
+	cmd->port = PORT_TP;
+
+	return 0;
+}
+
+static u32 gelic_net_get_link(struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+	int status;
+	u64 v1, v2;
+	int link;
+
+	status = lv1_net_control(bus_id(card), dev_id(card),
+			GELIC_NET_GET_ETH_PORT_STATUS, GELIC_NET_PORT, 0, 0,
+			&v1, &v2);
+	if (status)
+		return 0; /* link down */
+
+	if (v1 & GELIC_NET_LINK_UP)
+		link = 1;
+	else
+		link = 0;
+
+	return link;
+}
+
+static int gelic_net_nway_reset(struct net_device *netdev)
+{
+	if (netif_running(netdev)) {
+		gelic_net_stop(netdev);
+		gelic_net_open(netdev);
+	}
+	return 0;
+}
+
+static u32 gelic_net_get_tx_csum(struct net_device *netdev)
+{
+	return (netdev->features & NETIF_F_IP_CSUM) != 0;
+}
+
+static int gelic_net_set_tx_csum(struct net_device *netdev, u32 data)
+{
+	if (data)
+		netdev->features |= NETIF_F_IP_CSUM;
+	else
+		netdev->features &= ~NETIF_F_IP_CSUM;
+
+	return 0;
+}
+
+static u32 gelic_net_get_rx_csum(struct net_device *netdev)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+
+	return card->rx_csum;
+}
+
+static int gelic_net_set_rx_csum(struct net_device *netdev, u32 data)
+{
+	struct gelic_net_card *card = netdev_priv(netdev);
+
+	card->rx_csum = data;
+	return 0;
+}
+
+static struct ethtool_ops gelic_net_ethtool_ops = {
+	.get_drvinfo	= gelic_net_get_drvinfo,
+	.get_settings	= gelic_net_get_settings,
+	.get_link	= gelic_net_get_link,
+	.nway_reset	= gelic_net_nway_reset,
+	.get_tx_csum	= gelic_net_get_tx_csum,
+	.set_tx_csum	= gelic_net_set_tx_csum,
+	.get_rx_csum	= gelic_net_get_rx_csum,
+	.set_rx_csum	= gelic_net_set_rx_csum,
+};
+#endif
+
+/**
+ * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
+ * function (to be called not under interrupt status)
+ * @work: work is context of tx timout task
+ *
+ * called as task when tx hangs, resets interface (if interface is up)
+ */
+static void gelic_net_tx_timeout_task(struct work_struct *work)
+{
+	struct gelic_net_card *card =
+		container_of(work, struct gelic_net_card, tx_timeout_task);
+	struct net_device *netdev = card->netdev;
+
+	dev_info(ctodev(card), "%s:Timed out. Restarting... \n", __func__);
+
+	if (!(netdev->flags & IFF_UP))
+		goto out;
+
+	netif_device_detach(netdev);
+	gelic_net_stop(netdev);
+
+	gelic_net_open(netdev);
+	netif_device_attach(netdev);
+
+out:
+	atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
+ * @netdev: interface device structure
+ *
+ * called, if tx hangs. Schedules a task that resets the interface
+ */
+static void gelic_net_tx_timeout(struct net_device *netdev)
+{
+	struct gelic_net_card *card;
+
+	card = netdev_priv(netdev);
+	atomic_inc(&card->tx_timeout_task_counter);
+	if (netdev->flags & IFF_UP)
+		schedule_work(&card->tx_timeout_task);
+	else
+		atomic_dec(&card->tx_timeout_task_counter);
+}
+
+/**
+ * gelic_net_setup_netdev_ops - initialization of net_device operations
+ * @netdev: net_device structure
+ *
+ * fills out function pointers in the net_device structure
+ */
+static void gelic_net_setup_netdev_ops(struct net_device *netdev)
+{
+	netdev->open = &gelic_net_open;
+	netdev->stop = &gelic_net_stop;
+	netdev->hard_start_xmit = &gelic_net_xmit;
+	netdev->get_stats = &gelic_net_get_stats;
+	netdev->set_multicast_list = &gelic_net_set_multi;
+	netdev->change_mtu = &gelic_net_change_mtu;
+	/* tx watchdog */
+	netdev->tx_timeout = &gelic_net_tx_timeout;
+	netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
+	/* NAPI */
+	netdev->poll = &gelic_net_poll;
+	netdev->weight = GELIC_NET_NAPI_WEIGHT;
+#ifdef GELIC_NET_ETHTOOL
+	netdev->ethtool_ops = &gelic_net_ethtool_ops;
+#endif
+}
+
+/**
+ * gelic_net_setup_netdev - initialization of net_device
+ * @card: card structure
+ *
+ * Returns 0 on success or <0 on failure
+ *
+ * gelic_net_setup_netdev initializes the net_device structure
+ **/
+static int gelic_net_setup_netdev(struct gelic_net_card *card)
+{
+	struct net_device *netdev = card->netdev;
+	struct sockaddr addr;
+	unsigned int i;
+	int status;
+	u64 v1, v2;
+
+	SET_MODULE_OWNER(netdev);
+	SET_NETDEV_DEV(netdev, &card->dev->core);
+	spin_lock_init(&card->tx_dma_lock);
+
+	card->rx_csum = GELIC_NET_RX_CSUM_DEFAULT;
+
+	gelic_net_setup_netdev_ops(netdev);
+
+	netdev->features = NETIF_F_IP_CSUM;
+
+	status = lv1_net_control(bus_id(card), dev_id(card),
+				 GELIC_NET_GET_MAC_ADDRESS,
+				 0, 0, 0, &v1, &v2);
+	if (status || !is_valid_ether_addr((u8 *)&v1)) {
+		dev_info(ctodev(card),
+			 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
+			 __func__, status);
+		return -EINVAL;
+	}
+	v1 <<= 16;
+	memcpy(addr.sa_data, &v1, ETH_ALEN);
+	memcpy(netdev->dev_addr, addr.sa_data, ETH_ALEN);
+	dev_info(ctodev(card), "MAC addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+		 netdev->dev_addr[0], netdev->dev_addr[1],
+		 netdev->dev_addr[2], netdev->dev_addr[3],
+		 netdev->dev_addr[4], netdev->dev_addr[5]);
+
+	card->vlan_index = -1;	/* no vlan */
+	for (i = 0; i < GELIC_NET_VLAN_MAX; i++) {
+		status = lv1_net_control(bus_id(card), dev_id(card),
+					GELIC_NET_GET_VLAN_ID,
+					i + 1, /* index; one based */
+					0, 0, &v1, &v2);
+		if (status == GELIC_NET_VLAN_NO_ENTRY) {
+			dev_dbg(ctodev(card),
+				"GELIC_VLAN_ID no entry:%d, VLAN disabled\n",
+				status);
+			card->vlan_id[i] = 0;
+		} else if (status) {
+			dev_dbg(ctodev(card),
+				"%s:GELIC_NET_VLAN_ID faild, status=%d\n",
+				__func__, status);
+			card->vlan_id[i] = 0;
+		} else {
+			card->vlan_id[i] = (u32)v1;
+			dev_dbg(ctodev(card), "vlan_id:%d, %lx\n", i, v1);
+		}
+	}
+	if (card->vlan_id[GELIC_NET_VLAN_WIRED - 1])
+		card->vlan_index = GELIC_NET_VLAN_WIRED - 1;
+
+	status = register_netdev(netdev);
+	if (status) {
+		dev_err(ctodev(card), "%s:Couldn't register net_device: %d\n",
+			__func__, status);
+		return status;
+	}
+
+	return 0;
+}
+
+/**
+ * gelic_net_alloc_card - allocates net_device and card structure
+ *
+ * returns the card structure or NULL in case of errors
+ *
+ * the card and net_device structures are linked to each other
+ */
+static struct gelic_net_card *gelic_net_alloc_card(void)
+{
+	struct net_device *netdev;
+	struct gelic_net_card *card;
+	size_t alloc_size;
+
+	alloc_size = sizeof (*card) +
+		sizeof (struct gelic_net_descr) * GELIC_NET_RX_DESCRIPTORS +
+		sizeof (struct gelic_net_descr) * GELIC_NET_TX_DESCRIPTORS;
+	/*
+	 * we assume private data is allocated 32 bytes (or more) aligned
+	 * so that gelic_net_descr should be 32 bytes aligned.
+	 * Current alloc_etherdev() does do it because NETDEV_ALIGN
+	 * is 32.
+	 * check this assumption here.
+	 */
+	BUILD_BUG_ON(NETDEV_ALIGN < 32);
+	BUILD_BUG_ON(offsetof(struct gelic_net_card, irq_status) % 8);
+	BUILD_BUG_ON(offsetof(struct gelic_net_card, descr) % 32);
+
+	netdev = alloc_etherdev(alloc_size);
+	if (!netdev)
+		return NULL;
+
+	card = netdev_priv(netdev);
+	card->netdev = netdev;
+	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
+	init_waitqueue_head(&card->waitq);
+	atomic_set(&card->tx_timeout_task_counter, 0);
+
+	return card;
+}
+
+/**
+ * ps3_gelic_driver_probe - add a device to the control of this driver
+ */
+static int ps3_gelic_driver_probe (struct ps3_system_bus_device *dev)
+{
+	struct gelic_net_card *card = gelic_net_alloc_card();
+	int result;
+
+	if (!card) {
+		dev_info(&dev->core, "gelic_net_alloc_card failed\n");
+		result = -ENOMEM;
+		goto fail_alloc_card;
+	}
+
+	ps3_system_bus_set_driver_data(dev, card);
+	card->dev = dev;
+
+	result = ps3_open_hv_device(dev);
+
+	if (result) {
+		dev_dbg(&dev->core, "ps3_open_hv_device failed\n");
+		goto fail_open;
+	}
+
+	result = ps3_dma_region_create(dev->d_region);
+
+	if (result) {
+		dev_dbg(&dev->core, "ps3_dma_region_create failed(%d)\n",
+			result);
+		BUG_ON("check region type");
+		goto fail_dma_region;
+	}
+
+	result = lv1_net_set_interrupt_status_indicator(bus_id(card),
+							dev_id(card),
+		ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
+		0);
+
+	if (result) {
+		dev_dbg(&dev->core,
+			"lv1_net_set_interrupt_status_indicator failed: %s\n",
+			ps3_result(result));
+		result = -EIO;
+		goto fail_status_indicator;
+	}
+
+	result = gelic_net_setup_netdev(card);
+
+	if (result) {
+		dev_dbg(&dev->core, "%s:%d: ps3_dma_region_create failed: "
+			"(%d)\n", __func__, __LINE__, result);
+		goto fail_setup_netdev;
+	}
+
+	return 0;
+
+fail_setup_netdev:
+	lv1_net_set_interrupt_status_indicator(bus_id(card),
+					       bus_id(card),
+					       0 , 0);
+fail_status_indicator:
+	ps3_dma_region_free(dev->d_region);
+fail_dma_region:
+	ps3_close_hv_device(dev);
+fail_open:
+	ps3_system_bus_set_driver_data(dev, NULL);
+	free_netdev(card->netdev);
+fail_alloc_card:
+	return result;
+}
+
+/**
+ * ps3_gelic_driver_remove - remove a device from the control of this driver
+ */
+
+static int ps3_gelic_driver_remove (struct ps3_system_bus_device *dev)
+{
+	struct gelic_net_card *card = ps3_system_bus_get_driver_data(dev);
+
+	wait_event(card->waitq,
+		   atomic_read(&card->tx_timeout_task_counter) == 0);
+
+	lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
+					       0 , 0);
+
+	unregister_netdev(card->netdev);
+	free_netdev(card->netdev);
+
+	ps3_system_bus_set_driver_data(dev, NULL);
+
+	ps3_dma_region_free(dev->d_region);
+
+	ps3_close_hv_device(dev);
+
+	return 0;
+}
+
+static struct ps3_system_bus_driver ps3_gelic_driver = {
+	.match_id = PS3_MATCH_ID_GELIC,
+	.probe = ps3_gelic_driver_probe,
+	.remove = ps3_gelic_driver_remove,
+	.shutdown = ps3_gelic_driver_remove,
+	.core.name = "ps3_gelic_driver",
+	.core.owner = THIS_MODULE,
+};
+
+static int __init ps3_gelic_driver_init (void)
+{
+	return firmware_has_feature(FW_FEATURE_PS3_LV1)
+		? ps3_system_bus_driver_register(&ps3_gelic_driver)
+		: -ENODEV;
+}
+
+static void __exit ps3_gelic_driver_exit (void)
+{
+	ps3_system_bus_driver_unregister(&ps3_gelic_driver);
+}
+
+module_init (ps3_gelic_driver_init);
+module_exit (ps3_gelic_driver_exit);
+
+MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
+
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
new file mode 100644
index 000000000000..5e1c28654e16
--- /dev/null
+++ b/drivers/net/ps3_gelic_net.h
@@ -0,0 +1,239 @@
+/*
+ *  PS3 Platfom gelic network driver.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation.
+ *
+ * This file is based on: spider_net.h
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Authors : Utz Bacher <utz.bacher@de.ibm.com>
+ *           Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef _GELIC_NET_H
+#define _GELIC_NET_H
+
+#define GELIC_NET_DRV_NAME "Gelic Network Driver"
+#define GELIC_NET_DRV_VERSION "1.0"
+
+#define GELIC_NET_ETHTOOL               /* use ethtool */
+
+/* ioctl */
+#define GELIC_NET_GET_MODE              (SIOCDEVPRIVATE + 0)
+#define GELIC_NET_SET_MODE              (SIOCDEVPRIVATE + 1)
+
+/* descriptors */
+#define GELIC_NET_RX_DESCRIPTORS        128 /* num of descriptors */
+#define GELIC_NET_TX_DESCRIPTORS        128 /* num of descriptors */
+
+#define GELIC_NET_MAX_MTU               2308
+#define GELIC_NET_MIN_MTU               64
+#define GELIC_NET_RXBUF_ALIGN           128
+#define GELIC_NET_RX_CSUM_DEFAULT       1 /* hw chksum */
+#define GELIC_NET_WATCHDOG_TIMEOUT      5*HZ
+#define GELIC_NET_NAPI_WEIGHT           (GELIC_NET_RX_DESCRIPTORS)
+#define GELIC_NET_BROADCAST_ADDR        0xffffffffffffL
+#define GELIC_NET_VLAN_POS              (VLAN_ETH_ALEN * 2)
+#define GELIC_NET_VLAN_MAX              4
+#define GELIC_NET_MC_COUNT_MAX          32 /* multicast address list */
+
+enum gelic_net_int0_status {
+	GELIC_NET_GDTDCEINT  = 24,
+	GELIC_NET_GRFANMINT  = 28,
+};
+
+/* GHIINT1STS bits */
+enum gelic_net_int1_status {
+	GELIC_NET_GDADCEINT = 14,
+};
+
+/* interrupt mask */
+#define GELIC_NET_TXINT                   (1L << (GELIC_NET_GDTDCEINT + 32))
+
+#define GELIC_NET_RXINT0                  (1L << (GELIC_NET_GRFANMINT + 32))
+#define GELIC_NET_RXINT1                  (1L << GELIC_NET_GDADCEINT)
+#define GELIC_NET_RXINT                   (GELIC_NET_RXINT0 | GELIC_NET_RXINT1)
+
+ /* RX descriptor data_status bits */
+#define GELIC_NET_RXDMADU	0x80000000 /* destination MAC addr unknown */
+#define GELIC_NET_RXLSTFBF	0x40000000 /* last frame buffer            */
+#define GELIC_NET_RXIPCHK	0x20000000 /* IP checksum performed        */
+#define GELIC_NET_RXTCPCHK	0x10000000 /* TCP/UDP checksup performed   */
+#define GELIC_NET_RXIPSPKT	0x08000000 /* IPsec packet   */
+#define GELIC_NET_RXIPSAHPRT	0x04000000 /* IPsec AH protocol performed */
+#define GELIC_NET_RXIPSESPPRT	0x02000000 /* IPsec ESP protocol performed */
+#define GELIC_NET_RXSESPAH	0x01000000 /*
+					    * IPsec ESP protocol auth
+					    * performed
+					    */
+
+#define GELIC_NET_RXWTPKT	0x00C00000 /*
+					    * wakeup trigger packet
+					    * 01: Magic Packet (TM)
+					    * 10: ARP packet
+					    * 11: Multicast MAC addr
+					    */
+#define GELIC_NET_RXVLNPKT	0x00200000 /* VLAN packet */
+/* bit 20..16 reserved */
+#define GELIC_NET_RXRECNUM	0x0000ff00 /* reception receipt number */
+/* bit 7..0 reserved */
+
+#define GELIC_NET_TXDESC_TAIL		0
+#define GELIC_NET_DATA_STATUS_CHK_MASK	(GELIC_NET_RXIPCHK | GELIC_NET_RXTCPCHK)
+
+/* RX descriptor data_error bits */
+/* bit 31 reserved */
+#define GELIC_NET_RXALNERR	0x40000000 /* alignement error 10/100M */
+#define GELIC_NET_RXOVERERR	0x20000000 /* oversize error */
+#define GELIC_NET_RXRNTERR	0x10000000 /* Runt error */
+#define GELIC_NET_RXIPCHKERR	0x08000000 /* IP checksum  error */
+#define GELIC_NET_RXTCPCHKERR	0x04000000 /* TCP/UDP checksum  error */
+#define GELIC_NET_RXUMCHSP	0x02000000 /* unmatched sp on sp */
+#define GELIC_NET_RXUMCHSPI	0x01000000 /* unmatched SPI on SAD */
+#define GELIC_NET_RXUMCHSAD	0x00800000 /* unmatched SAD */
+#define GELIC_NET_RXIPSAHERR	0x00400000 /* auth error on AH protocol
+					    * processing */
+#define GELIC_NET_RXIPSESPAHERR	0x00200000 /* auth error on ESP protocol
+					    * processing */
+#define GELIC_NET_RXDRPPKT	0x00100000 /* drop packet */
+#define GELIC_NET_RXIPFMTERR	0x00080000 /* IP packet format error */
+/* bit 18 reserved */
+#define GELIC_NET_RXDATAERR	0x00020000 /* IP packet format error */
+#define GELIC_NET_RXCALERR	0x00010000 /* cariier extension length
+					    * error */
+#define GELIC_NET_RXCREXERR	0x00008000 /* carrier extention error */
+#define GELIC_NET_RXMLTCST	0x00004000 /* multicast address frame */
+/* bit 13..0 reserved */
+#define GELIC_NET_DATA_ERROR_CHK_MASK		\
+	(GELIC_NET_RXIPCHKERR | GELIC_NET_RXTCPCHKERR)
+
+
+/* tx descriptor command and status */
+#define GELIC_NET_DMAC_CMDSTAT_NOCS       0xa0080000 /* middle of frame */
+#define GELIC_NET_DMAC_CMDSTAT_TCPCS      0xa00a0000
+#define GELIC_NET_DMAC_CMDSTAT_UDPCS      0xa00b0000
+#define GELIC_NET_DMAC_CMDSTAT_END_FRAME  0x00040000 /* end of frame */
+
+#define GELIC_NET_DMAC_CMDSTAT_RXDCEIS	  0x00000002 /* descriptor chain end
+						      * interrupt status */
+
+#define GELIC_NET_DMAC_CMDSTAT_CHAIN_END  0x00000002 /* RXDCEIS:DMA stopped */
+#define GELIC_NET_DMAC_CMDSTAT_NOT_IN_USE 0xb0000000
+#define GELIC_NET_DESCR_IND_PROC_SHIFT    28
+#define GELIC_NET_DESCR_IND_PROC_MASKO    0x0fffffff
+
+
+enum gelic_net_descr_status {
+	GELIC_NET_DESCR_COMPLETE            = 0x00, /* used in rx and tx */
+	GELIC_NET_DESCR_RESPONSE_ERROR      = 0x01, /* used in rx and tx */
+	GELIC_NET_DESCR_PROTECTION_ERROR    = 0x02, /* used in rx and tx */
+	GELIC_NET_DESCR_FRAME_END           = 0x04, /* used in rx */
+	GELIC_NET_DESCR_FORCE_END           = 0x05, /* used in rx and tx */
+	GELIC_NET_DESCR_CARDOWNED           = 0x0a, /* used in rx and tx */
+	GELIC_NET_DESCR_NOT_IN_USE                  /* any other value */
+};
+/* for lv1_net_control */
+#define GELIC_NET_GET_MAC_ADDRESS               0x0000000000000001
+#define GELIC_NET_GET_ETH_PORT_STATUS           0x0000000000000002
+#define GELIC_NET_SET_NEGOTIATION_MODE          0x0000000000000003
+#define GELIC_NET_GET_VLAN_ID                   0x0000000000000004
+
+#define GELIC_NET_LINK_UP                       0x0000000000000001
+#define GELIC_NET_FULL_DUPLEX                   0x0000000000000002
+#define GELIC_NET_AUTO_NEG                      0x0000000000000004
+#define GELIC_NET_SPEED_10                      0x0000000000000010
+#define GELIC_NET_SPEED_100                     0x0000000000000020
+#define GELIC_NET_SPEED_1000                    0x0000000000000040
+
+#define GELIC_NET_VLAN_ALL                      0x0000000000000001
+#define GELIC_NET_VLAN_WIRED                    0x0000000000000002
+#define GELIC_NET_VLAN_WIRELESS                 0x0000000000000003
+#define GELIC_NET_VLAN_PSP                      0x0000000000000004
+#define GELIC_NET_VLAN_PORT0                    0x0000000000000010
+#define GELIC_NET_VLAN_PORT1                    0x0000000000000011
+#define GELIC_NET_VLAN_PORT2                    0x0000000000000012
+#define GELIC_NET_VLAN_DAEMON_CLIENT_BSS        0x0000000000000013
+#define GELIC_NET_VLAN_LIBERO_CLIENT_BSS        0x0000000000000014
+#define GELIC_NET_VLAN_NO_ENTRY                 -6
+
+#define GELIC_NET_PORT                          2 /* for port status */
+
+/* size of hardware part of gelic descriptor */
+#define GELIC_NET_DESCR_SIZE	(32)
+struct gelic_net_descr {
+	/* as defined by the hardware */
+	u32 buf_addr;
+	u32 buf_size;
+	u32 next_descr_addr;
+	u32 dmac_cmd_status;
+	u32 result_size;
+	u32 valid_size;	/* all zeroes for tx */
+	u32 data_status;
+	u32 data_error;	/* all zeroes for tx */
+
+	/* used in the driver */
+	struct sk_buff *skb;
+	dma_addr_t bus_addr;
+	struct gelic_net_descr *next;
+	struct gelic_net_descr *prev;
+	struct vlan_ethhdr vlan;
+} __attribute__((aligned(32)));
+
+struct gelic_net_descr_chain {
+	/* we walk from tail to head */
+	struct gelic_net_descr *head;
+	struct gelic_net_descr *tail;
+};
+
+struct gelic_net_card {
+	struct net_device *netdev;
+	/*
+	 * hypervisor requires irq_status should be
+	 * 8 bytes aligned, but u64 member is
+	 * always disposed in that manner
+	 */
+	u64 irq_status;
+	u64 ghiintmask;
+
+	struct ps3_system_bus_device *dev;
+	u32 vlan_id[GELIC_NET_VLAN_MAX];
+	int vlan_index;
+
+	struct gelic_net_descr_chain tx_chain;
+	struct gelic_net_descr_chain rx_chain;
+	/* gurad dmac descriptor chain*/
+	spinlock_t chain_lock;
+
+	struct net_device_stats netdev_stats;
+	int rx_csum;
+	/* guard tx_dma_progress */
+	spinlock_t tx_dma_lock;
+	int tx_dma_progress;
+
+	struct work_struct tx_timeout_task;
+	atomic_t tx_timeout_task_counter;
+	wait_queue_head_t waitq;
+
+	struct gelic_net_descr *tx_top, *rx_top;
+	struct gelic_net_descr descr[0];
+};
+
+
+extern unsigned long p_to_lp(long pa);
+
+#endif /* _GELIC_NET_H */
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 585be044ebbb..8be8be451ada 100755
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -2433,37 +2433,22 @@ static int ql_get_seg_count(struct ql3_adapter *qdev,
 	return -1;
 }
 
-static void ql_hw_csum_setup(struct sk_buff *skb,
+static void ql_hw_csum_setup(const struct sk_buff *skb,
 			     struct ob_mac_iocb_req *mac_iocb_ptr)
 {
-	struct ethhdr *eth;
-	struct iphdr *ip = NULL;
-	u8 offset = ETH_HLEN;
+	const struct iphdr *ip = ip_hdr(skb);
 
-	eth = (struct ethhdr *)(skb->data);
+	mac_iocb_ptr->ip_hdr_off = skb_network_offset(skb);
+	mac_iocb_ptr->ip_hdr_len = ip->ihl;
 
-	if (eth->h_proto == __constant_htons(ETH_P_IP)) {
-		ip = (struct iphdr *)&skb->data[ETH_HLEN];
-	} else if (eth->h_proto == htons(ETH_P_8021Q) &&
-		   ((struct vlan_ethhdr *)skb->data)->
-		   h_vlan_encapsulated_proto == __constant_htons(ETH_P_IP)) {
-		ip = (struct iphdr *)&skb->data[VLAN_ETH_HLEN];
-		offset = VLAN_ETH_HLEN;
-	}
-
-	if (ip) {
-		if (ip->protocol == IPPROTO_TCP) {
-			mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_TC | 
+	if (ip->protocol == IPPROTO_TCP) {
+		mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_TC |
 			OB_3032MAC_IOCB_REQ_IC;
-			mac_iocb_ptr->ip_hdr_off = offset;
-			mac_iocb_ptr->ip_hdr_len = ip->ihl;
-		} else if (ip->protocol == IPPROTO_UDP) {
-			mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_UC | 
+	} else {
+		mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_UC |
 			OB_3032MAC_IOCB_REQ_IC;
-			mac_iocb_ptr->ip_hdr_off = offset;
-			mac_iocb_ptr->ip_hdr_len = ip->ihl;
-		}
 	}
+
 }
 
 /*
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 5ec7752caa48..982a9010c7a9 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1,53 +1,11 @@
 /*
-=========================================================================
- r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver for Linux kernel 2.4.x.
- --------------------------------------------------------------------
-
- History:
- Feb  4 2002	- created initially by ShuChen <shuchen@realtek.com.tw>.
- May 20 2002	- Add link status force-mode and TBI mode support.
-	2004	- Massive updates. See kernel SCM system for details.
-=========================================================================
-  1. [DEPRECATED: use ethtool instead] The media can be forced in 5 modes.
-	 Command: 'insmod r8169 media = SET_MEDIA'
-	 Ex:	  'insmod r8169 media = 0x04' will force PHY to operate in 100Mpbs Half-duplex.
-
-	 SET_MEDIA can be:
- 		_10_Half	= 0x01
- 		_10_Full	= 0x02
- 		_100_Half	= 0x04
- 		_100_Full	= 0x08
- 		_1000_Full	= 0x10
-
-  2. Support TBI mode.
-=========================================================================
-VERSION 1.1	<2002/10/4>
-
-	The bit4:0 of MII register 4 is called "selector field", and have to be
-	00001b to indicate support of IEEE std 802.3 during NWay process of
-	exchanging Link Code Word (FLP).
-
-VERSION 1.2	<2002/11/30>
-
-	- Large style cleanup
-	- Use ether_crc in stock kernel (linux/crc32.h)
-	- Copy mc_filter setup code from 8139cp
-	  (includes an optimization, and avoids set_bit use)
-
-VERSION 1.6LK	<2004/04/14>
-
-	- Merge of Realtek's version 1.6
-	- Conversion to DMA API
-	- Suspend/resume
-	- Endianness
-	- Misc Rx/Tx bugs
-
-VERSION 2.2LK	<2005/01/25>
-
-	- RX csum, TX csum/SG, TSO
-	- VLAN
-	- baby (< 7200) Jumbo frames support
-	- Merge of Realtek's version 2.2 (new phy)
+ * r8169.c: RealTek 8169/8168/8101 ethernet driver.
+ *
+ * Copyright (c) 2002 ShuChen <shuchen@realtek.com.tw>
+ * Copyright (c) 2003 - 2007 Francois Romieu <romieu@fr.zoreil.com>
+ * Copyright (c) a lot of people too. Please respect their work.
+ *
+ * See MAINTAINERS file for support contact information.
  */
 
 #include <linux/module.h>
@@ -108,11 +66,6 @@ VERSION 2.2LK	<2005/01/25>
 #define rtl8169_rx_quota(count, quota)	count
 #endif
 
-/* media options */
-#define MAX_UNITS 8
-static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
-static int num_media = 0;
-
 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
 static const int max_interrupt_work = 20;
 
@@ -126,7 +79,7 @@ static const int multicast_filter_limit = 32;
 #define RX_FIFO_THRESH	7	/* 7 means NO threshold, Rx buffer level before first PCI xfer. */
 #define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
 #define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
-#define EarlyTxThld 	0x3F	/* 0x3F means NO early transmit */
+#define EarlyTxThld	0x3F	/* 0x3F means NO early transmit */
 #define RxPacketMaxSize	0x3FE8	/* 16K - 1 - ETH_HLEN - VLAN - CRC... */
 #define SafeMtu		0x1c20	/* ... actually life sucks beyond ~7k */
 #define InterFrameGap	0x03	/* 3 means InterFrameGap = the shortest one */
@@ -151,16 +104,17 @@ static const int multicast_filter_limit = 32;
 #define RTL_R32(reg)		((unsigned long) readl (ioaddr + (reg)))
 
 enum mac_version {
-	RTL_GIGA_MAC_VER_01 = 0x00,
-	RTL_GIGA_MAC_VER_02 = 0x01,
-	RTL_GIGA_MAC_VER_03 = 0x02,
-	RTL_GIGA_MAC_VER_04 = 0x03,
-	RTL_GIGA_MAC_VER_05 = 0x04,
-	RTL_GIGA_MAC_VER_11 = 0x0b,
-	RTL_GIGA_MAC_VER_12 = 0x0c,
-	RTL_GIGA_MAC_VER_13 = 0x0d,
-	RTL_GIGA_MAC_VER_14 = 0x0e,
-	RTL_GIGA_MAC_VER_15 = 0x0f
+	RTL_GIGA_MAC_VER_01 = 0x01, // 8169
+	RTL_GIGA_MAC_VER_02 = 0x02, // 8169S
+	RTL_GIGA_MAC_VER_03 = 0x03, // 8110S
+	RTL_GIGA_MAC_VER_04 = 0x04, // 8169SB
+	RTL_GIGA_MAC_VER_05 = 0x05, // 8110SCd
+	RTL_GIGA_MAC_VER_06 = 0x06, // 8110SCe
+	RTL_GIGA_MAC_VER_11 = 0x0b, // 8168Bb
+	RTL_GIGA_MAC_VER_12 = 0x0c, // 8168Be 8168Bf
+	RTL_GIGA_MAC_VER_13 = 0x0d, // 8101Eb 8101Ec
+	RTL_GIGA_MAC_VER_14 = 0x0e, // 8101
+	RTL_GIGA_MAC_VER_15 = 0x0f  // 8101
 };
 
 enum phy_version {
@@ -180,11 +134,12 @@ static const struct {
 	u8 mac_version;
 	u32 RxConfigMask;	/* Clears the bits supported by this chip */
 } rtl_chip_info[] = {
-	_R("RTL8169",		RTL_GIGA_MAC_VER_01, 0xff7e1880),
-	_R("RTL8169s/8110s",	RTL_GIGA_MAC_VER_02, 0xff7e1880),
-	_R("RTL8169s/8110s",	RTL_GIGA_MAC_VER_03, 0xff7e1880),
-	_R("RTL8169sb/8110sb",	RTL_GIGA_MAC_VER_04, 0xff7e1880),
-	_R("RTL8169sc/8110sc",	RTL_GIGA_MAC_VER_05, 0xff7e1880),
+	_R("RTL8169",		RTL_GIGA_MAC_VER_01, 0xff7e1880), // 8169
+	_R("RTL8169s",		RTL_GIGA_MAC_VER_02, 0xff7e1880), // 8169S
+	_R("RTL8110s",		RTL_GIGA_MAC_VER_03, 0xff7e1880), // 8110S
+	_R("RTL8169sb/8110sb",	RTL_GIGA_MAC_VER_04, 0xff7e1880), // 8169SB
+	_R("RTL8169sc/8110sc",	RTL_GIGA_MAC_VER_05, 0xff7e1880), // 8110SCd
+	_R("RTL8169sc/8110sc",	RTL_GIGA_MAC_VER_06, 0xff7e1880), // 8110SCe
 	_R("RTL8168b/8111b",	RTL_GIGA_MAC_VER_11, 0xff7e1880), // PCI-E
 	_R("RTL8168b/8111b",	RTL_GIGA_MAC_VER_12, 0xff7e1880), // PCI-E
 	_R("RTL8101e",		RTL_GIGA_MAC_VER_13, 0xff7e1880), // PCI-E 8139
@@ -199,20 +154,15 @@ enum cfg_version {
 	RTL_CFG_2
 };
 
-static const struct {
-	unsigned int region;
-	unsigned int align;
-} rtl_cfg_info[] = {
-	[RTL_CFG_0] = { 1, NET_IP_ALIGN },
-	[RTL_CFG_1] = { 2, NET_IP_ALIGN },
-	[RTL_CFG_2] = { 2, 8 }
-};
+static void rtl_hw_start_8169(struct net_device *);
+static void rtl_hw_start_8168(struct net_device *);
+static void rtl_hw_start_8101(struct net_device *);
 
 static struct pci_device_id rtl8169_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8129), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8136), 0, 0, RTL_CFG_2 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8167), 0, 0, RTL_CFG_0 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8168), 0, 0, RTL_CFG_2 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8168), 0, 0, RTL_CFG_1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8169), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK,	0x4300), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(0x1259,			0xc107), 0, 0, RTL_CFG_0 },
@@ -230,62 +180,63 @@ static struct {
 	u32 msg_enable;
 } debug = { -1 };
 
-enum RTL8169_registers {
-	MAC0 = 0,		/* Ethernet hardware address. */
-	MAR0 = 8,		/* Multicast filter. */
-	CounterAddrLow = 0x10,
-	CounterAddrHigh = 0x14,
-	TxDescStartAddrLow = 0x20,
-	TxDescStartAddrHigh = 0x24,
-	TxHDescStartAddrLow = 0x28,
-	TxHDescStartAddrHigh = 0x2c,
-	FLASH = 0x30,
-	ERSR = 0x36,
-	ChipCmd = 0x37,
-	TxPoll = 0x38,
-	IntrMask = 0x3C,
-	IntrStatus = 0x3E,
-	TxConfig = 0x40,
-	RxConfig = 0x44,
-	RxMissed = 0x4C,
-	Cfg9346 = 0x50,
-	Config0 = 0x51,
-	Config1 = 0x52,
-	Config2 = 0x53,
-	Config3 = 0x54,
-	Config4 = 0x55,
-	Config5 = 0x56,
-	MultiIntr = 0x5C,
-	PHYAR = 0x60,
-	TBICSR = 0x64,
-	TBI_ANAR = 0x68,
-	TBI_LPAR = 0x6A,
-	PHYstatus = 0x6C,
-	RxMaxSize = 0xDA,
-	CPlusCmd = 0xE0,
-	IntrMitigate = 0xE2,
-	RxDescAddrLow = 0xE4,
-	RxDescAddrHigh = 0xE8,
-	EarlyTxThres = 0xEC,
-	FuncEvent = 0xF0,
-	FuncEventMask = 0xF4,
-	FuncPresetState = 0xF8,
-	FuncForceEvent = 0xFC,
+enum rtl_registers {
+	MAC0		= 0,	/* Ethernet hardware address. */
+	MAC4		= 4,
+	MAR0		= 8,	/* Multicast filter. */
+	CounterAddrLow		= 0x10,
+	CounterAddrHigh		= 0x14,
+	TxDescStartAddrLow	= 0x20,
+	TxDescStartAddrHigh	= 0x24,
+	TxHDescStartAddrLow	= 0x28,
+	TxHDescStartAddrHigh	= 0x2c,
+	FLASH		= 0x30,
+	ERSR		= 0x36,
+	ChipCmd		= 0x37,
+	TxPoll		= 0x38,
+	IntrMask	= 0x3c,
+	IntrStatus	= 0x3e,
+	TxConfig	= 0x40,
+	RxConfig	= 0x44,
+	RxMissed	= 0x4c,
+	Cfg9346		= 0x50,
+	Config0		= 0x51,
+	Config1		= 0x52,
+	Config2		= 0x53,
+	Config3		= 0x54,
+	Config4		= 0x55,
+	Config5		= 0x56,
+	MultiIntr	= 0x5c,
+	PHYAR		= 0x60,
+	TBICSR		= 0x64,
+	TBI_ANAR	= 0x68,
+	TBI_LPAR	= 0x6a,
+	PHYstatus	= 0x6c,
+	RxMaxSize	= 0xda,
+	CPlusCmd	= 0xe0,
+	IntrMitigate	= 0xe2,
+	RxDescAddrLow	= 0xe4,
+	RxDescAddrHigh	= 0xe8,
+	EarlyTxThres	= 0xec,
+	FuncEvent	= 0xf0,
+	FuncEventMask	= 0xf4,
+	FuncPresetState	= 0xf8,
+	FuncForceEvent	= 0xfc,
 };
 
-enum RTL8169_register_content {
+enum rtl_register_content {
 	/* InterruptStatusBits */
-	SYSErr = 0x8000,
-	PCSTimeout = 0x4000,
-	SWInt = 0x0100,
-	TxDescUnavail = 0x80,
-	RxFIFOOver = 0x40,
-	LinkChg = 0x20,
-	RxOverflow = 0x10,
-	TxErr = 0x08,
-	TxOK = 0x04,
-	RxErr = 0x02,
-	RxOK = 0x01,
+	SYSErr		= 0x8000,
+	PCSTimeout	= 0x4000,
+	SWInt		= 0x0100,
+	TxDescUnavail	= 0x0080,
+	RxFIFOOver	= 0x0040,
+	LinkChg		= 0x0020,
+	RxOverflow	= 0x0010,
+	TxErr		= 0x0008,
+	TxOK		= 0x0004,
+	RxErr		= 0x0002,
+	RxOK		= 0x0001,
 
 	/* RxStatusDesc */
 	RxFOVF	= (1 << 23),
@@ -295,26 +246,31 @@ enum RTL8169_register_content {
 	RxCRC	= (1 << 19),
 
 	/* ChipCmdBits */
-	CmdReset = 0x10,
-	CmdRxEnb = 0x08,
-	CmdTxEnb = 0x04,
-	RxBufEmpty = 0x01,
+	CmdReset	= 0x10,
+	CmdRxEnb	= 0x08,
+	CmdTxEnb	= 0x04,
+	RxBufEmpty	= 0x01,
+
+	/* TXPoll register p.5 */
+	HPQ		= 0x80,		/* Poll cmd on the high prio queue */
+	NPQ		= 0x40,		/* Poll cmd on the low prio queue */
+	FSWInt		= 0x01,		/* Forced software interrupt */
 
 	/* Cfg9346Bits */
-	Cfg9346_Lock = 0x00,
-	Cfg9346_Unlock = 0xC0,
+	Cfg9346_Lock	= 0x00,
+	Cfg9346_Unlock	= 0xc0,
 
 	/* rx_mode_bits */
-	AcceptErr = 0x20,
-	AcceptRunt = 0x10,
-	AcceptBroadcast = 0x08,
-	AcceptMulticast = 0x04,
-	AcceptMyPhys = 0x02,
-	AcceptAllPhys = 0x01,
+	AcceptErr	= 0x20,
+	AcceptRunt	= 0x10,
+	AcceptBroadcast	= 0x08,
+	AcceptMulticast	= 0x04,
+	AcceptMyPhys	= 0x02,
+	AcceptAllPhys	= 0x01,
 
 	/* RxConfigBits */
-	RxCfgFIFOShift = 13,
-	RxCfgDMAShift = 8,
+	RxCfgFIFOShift	= 13,
+	RxCfgDMAShift	=  8,
 
 	/* TxConfigBits */
 	TxInterFrameGapShift = 24,
@@ -323,6 +279,10 @@ enum RTL8169_register_content {
 	/* Config1 register p.24 */
 	PMEnable	= (1 << 0),	/* Power Management Enable */
 
+	/* Config2 register p. 25 */
+	PCI_Clock_66MHz = 0x01,
+	PCI_Clock_33MHz = 0x00,
+
 	/* Config3 register p.25 */
 	MagicPacket	= (1 << 5),	/* Wake up when receives a Magic Packet */
 	LinkUp		= (1 << 4),	/* Wake up when the cable connection is re-established */
@@ -343,36 +303,34 @@ enum RTL8169_register_content {
 	TBINwComplete	= 0x01000000,
 
 	/* CPlusCmd p.31 */
+	PktCntrDisable	= (1 << 7),	// 8168
 	RxVlan		= (1 << 6),
 	RxChkSum	= (1 << 5),
 	PCIDAC		= (1 << 4),
 	PCIMulRW	= (1 << 3),
+	INTT_0		= 0x0000,	// 8168
+	INTT_1		= 0x0001,	// 8168
+	INTT_2		= 0x0002,	// 8168
+	INTT_3		= 0x0003,	// 8168
 
 	/* rtl8169_PHYstatus */
-	TBI_Enable = 0x80,
-	TxFlowCtrl = 0x40,
-	RxFlowCtrl = 0x20,
-	_1000bpsF = 0x10,
-	_100bps = 0x08,
-	_10bps = 0x04,
-	LinkStatus = 0x02,
-	FullDup = 0x01,
-
-	/* _MediaType */
-	_10_Half = 0x01,
-	_10_Full = 0x02,
-	_100_Half = 0x04,
-	_100_Full = 0x08,
-	_1000_Full = 0x10,
+	TBI_Enable	= 0x80,
+	TxFlowCtrl	= 0x40,
+	RxFlowCtrl	= 0x20,
+	_1000bpsF	= 0x10,
+	_100bps		= 0x08,
+	_10bps		= 0x04,
+	LinkStatus	= 0x02,
+	FullDup		= 0x01,
 
 	/* _TBICSRBit */
-	TBILinkOK = 0x02000000,
+	TBILinkOK	= 0x02000000,
 
 	/* DumpCounterCommand */
-	CounterDump = 0x8,
+	CounterDump	= 0x8,
 };
 
-enum _DescStatusBit {
+enum desc_status_bit {
 	DescOwn		= (1 << 31), /* Descriptor is owned by NIC */
 	RingEnd		= (1 << 30), /* End of descriptor ring */
 	FirstFrag	= (1 << 29), /* First segment of a packet */
@@ -405,15 +363,15 @@ enum _DescStatusBit {
 #define RsvdMask	0x3fffc000
 
 struct TxDesc {
-	u32 opts1;
-	u32 opts2;
-	u64 addr;
+	__le32 opts1;
+	__le32 opts2;
+	__le64 addr;
 };
 
 struct RxDesc {
-	u32 opts1;
-	u32 opts2;
-	u64 addr;
+	__le32 opts1;
+	__le32 opts2;
+	__le64 addr;
 };
 
 struct ring_info {
@@ -446,6 +404,8 @@ struct rtl8169_private {
 	unsigned rx_buf_sz;
 	struct timer_list timer;
 	u16 cp_cmd;
+	u16 intr_event;
+	u16 napi_event;
 	u16 intr_mask;
 	int phy_auto_nego_reg;
 	int phy_1000_ctrl_reg;
@@ -455,6 +415,7 @@ struct rtl8169_private {
 	int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex);
 	void (*get_settings)(struct net_device *, struct ethtool_cmd *);
 	void (*phy_reset_enable)(void __iomem *);
+	void (*hw_start)(struct net_device *);
 	unsigned int (*phy_reset_pending)(void __iomem *);
 	unsigned int (*link_ok)(void __iomem *);
 	struct delayed_work task;
@@ -463,8 +424,6 @@ struct rtl8169_private {
 
 MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
 MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
-module_param_array(media, int, &num_media, 0);
-MODULE_PARM_DESC(media, "force phy operation. Deprecated by ethtool (8).");
 module_param(rx_copybreak, int, 0);
 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
 module_param(use_dac, int, 0);
@@ -478,9 +437,9 @@ static int rtl8169_open(struct net_device *dev);
 static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance);
 static int rtl8169_init_ring(struct net_device *dev);
-static void rtl8169_hw_start(struct net_device *dev);
+static void rtl_hw_start(struct net_device *dev);
 static int rtl8169_close(struct net_device *dev);
-static void rtl8169_set_rx_mode(struct net_device *dev);
+static void rtl_set_rx_mode(struct net_device *dev);
 static void rtl8169_tx_timeout(struct net_device *dev);
 static struct net_device_stats *rtl8169_get_stats(struct net_device *dev);
 static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
@@ -493,35 +452,37 @@ static void rtl8169_rx_clear(struct rtl8169_private *tp);
 static int rtl8169_poll(struct net_device *dev, int *budget);
 #endif
 
-static const u16 rtl8169_intr_mask =
-	SYSErr | LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK;
-static const u16 rtl8169_napi_event =
-	RxOK | RxOverflow | RxFIFOOver | TxOK | TxErr;
 static const unsigned int rtl8169_rx_config =
 	(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
 
-static void mdio_write(void __iomem *ioaddr, int RegAddr, int value)
+static void mdio_write(void __iomem *ioaddr, int reg_addr, int value)
 {
 	int i;
 
-	RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value);
+	RTL_W32(PHYAR, 0x80000000 | (reg_addr & 0xFF) << 16 | value);
 
 	for (i = 20; i > 0; i--) {
-		/* Check if the RTL8169 has completed writing to the specified MII register */
+		/*
+		 * Check if the RTL8169 has completed writing to the specified
+		 * MII register.
+		 */
 		if (!(RTL_R32(PHYAR) & 0x80000000))
 			break;
 		udelay(25);
 	}
 }
 
-static int mdio_read(void __iomem *ioaddr, int RegAddr)
+static int mdio_read(void __iomem *ioaddr, int reg_addr)
 {
 	int i, value = -1;
 
-	RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16);
+	RTL_W32(PHYAR, 0x0 | (reg_addr & 0xFF) << 16);
 
 	for (i = 20; i > 0; i--) {
-		/* Check if the RTL8169 has completed retrieving data from the specified MII register */
+		/*
+		 * Check if the RTL8169 has completed retrieving data from
+		 * the specified MII register.
+		 */
 		if (RTL_R32(PHYAR) & 0x80000000) {
 			value = (int) (RTL_R32(PHYAR) & 0xFFFF);
 			break;
@@ -579,7 +540,8 @@ static void rtl8169_xmii_reset_enable(void __iomem *ioaddr)
 }
 
 static void rtl8169_check_link_status(struct net_device *dev,
-				      struct rtl8169_private *tp, void __iomem *ioaddr)
+				      struct rtl8169_private *tp,
+				      void __iomem *ioaddr)
 {
 	unsigned long flags;
 
@@ -596,38 +558,6 @@ static void rtl8169_check_link_status(struct net_device *dev,
 	spin_unlock_irqrestore(&tp->lock, flags);
 }
 
-static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex)
-{
-	struct {
-		u16 speed;
-		u8 duplex;
-		u8 autoneg;
-		u8 media;
-	} link_settings[] = {
-		{ SPEED_10,	DUPLEX_HALF, AUTONEG_DISABLE,	_10_Half },
-		{ SPEED_10,	DUPLEX_FULL, AUTONEG_DISABLE,	_10_Full },
-		{ SPEED_100,	DUPLEX_HALF, AUTONEG_DISABLE,	_100_Half },
-		{ SPEED_100,	DUPLEX_FULL, AUTONEG_DISABLE,	_100_Full },
-		{ SPEED_1000,	DUPLEX_FULL, AUTONEG_DISABLE,	_1000_Full },
-		/* Make TBI happy */
-		{ SPEED_1000,	DUPLEX_FULL, AUTONEG_ENABLE,	0xff }
-	}, *p;
-	unsigned char option;
-
-	option = ((idx < MAX_UNITS) && (idx >= 0)) ? media[idx] : 0xff;
-
-	if ((option != 0xff) && !idx && netif_msg_drv(&debug))
-		printk(KERN_WARNING PFX "media option is deprecated.\n");
-
-	for (p = link_settings; p->media != 0xff; p++) {
-		if (p->media == option)
-			break;
-	}
-	*autoneg = p->autoneg;
-	*speed = p->speed;
-	*duplex = p->duplex;
-}
-
 static void rtl8169_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
@@ -667,7 +597,7 @@ static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
-	int i;
+	unsigned int i;
 	static struct {
 		u32 opt;
 		u16 reg;
@@ -893,8 +823,7 @@ static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
 	int ret;
 
 	if (tp->vlgrp && (opts2 & RxVlanTag)) {
-		rtl8169_rx_hwaccel_skb(skb, tp->vlgrp,
-				       swab16(opts2 & 0xffff));
+		rtl8169_rx_hwaccel_skb(skb, tp->vlgrp, swab16(opts2 & 0xffff));
 		ret = 0;
 	} else
 		ret = -1;
@@ -1115,7 +1044,6 @@ static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 	}
 }
 
-
 static const struct ethtool_ops rtl8169_ethtool_ops = {
 	.get_drvinfo		= rtl8169_get_drvinfo,
 	.get_regs_len		= rtl8169_get_regs_len,
@@ -1141,8 +1069,8 @@ static const struct ethtool_ops rtl8169_ethtool_ops = {
 	.get_perm_addr		= ethtool_op_get_perm_addr,
 };
 
-static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum,
-				       int bitval)
+static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg,
+				       int bitnum, int bitval)
 {
 	int val;
 
@@ -1152,8 +1080,20 @@ static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum
 	mdio_write(ioaddr, reg, val & 0xffff);
 }
 
-static void rtl8169_get_mac_version(struct rtl8169_private *tp, void __iomem *ioaddr)
+static void rtl8169_get_mac_version(struct rtl8169_private *tp,
+				    void __iomem *ioaddr)
 {
+	/*
+	 * The driver currently handles the 8168Bf and the 8168Be identically
+	 * but they can be identified more specifically through the test below
+	 * if needed:
+	 *
+	 * (RTL_R32(TxConfig) & 0x700000) == 0x500000 ? 8168Bf : 8168Be
+	 *
+	 * Same thing for the 8101Eb and the 8101Ec:
+	 *
+	 * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
+	 */
 	const struct {
 		u32 mask;
 		int mac_version;
@@ -1163,6 +1103,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, void __iomem *io
 		{ 0x34000000,	RTL_GIGA_MAC_VER_13 },
 		{ 0x30800000,	RTL_GIGA_MAC_VER_14 },
 		{ 0x30000000,	RTL_GIGA_MAC_VER_11 },
+		{ 0x98000000,	RTL_GIGA_MAC_VER_06 },
 		{ 0x18000000,	RTL_GIGA_MAC_VER_05 },
 		{ 0x10000000,	RTL_GIGA_MAC_VER_04 },
 		{ 0x04000000,	RTL_GIGA_MAC_VER_03 },
@@ -1171,7 +1112,7 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp, void __iomem *io
 	}, *p = mac_info;
 	u32 reg;
 
-	reg = RTL_R32(TxConfig) & 0x7c800000;
+	reg = RTL_R32(TxConfig) & 0xfc800000;
 	while ((reg & p->mask) != p->mask)
 		p++;
 	tp->mac_version = p->mac_version;
@@ -1182,7 +1123,8 @@ static void rtl8169_print_mac_version(struct rtl8169_private *tp)
 	dprintk("mac_version = 0x%02x\n", tp->mac_version);
 }
 
-static void rtl8169_get_phy_version(struct rtl8169_private *tp, void __iomem *ioaddr)
+static void rtl8169_get_phy_version(struct rtl8169_private *tp,
+				    void __iomem *ioaddr)
 {
 	const struct {
 		u16 mask;
@@ -1259,7 +1201,7 @@ static void rtl8169_hw_phy_config(struct net_device *dev)
 		  0xbf00 }	//w 0 15 0 bf00
 		}
 	}, *p = phy_magic;
-	int i;
+	unsigned int i;
 
 	rtl8169_print_mac_version(tp);
 	rtl8169_print_phy_version(tp);
@@ -1393,7 +1335,7 @@ static void rtl8169_phy_reset(struct net_device *dev,
 			      struct rtl8169_private *tp)
 {
 	void __iomem *ioaddr = tp->mmio_addr;
-	int i;
+	unsigned int i;
 
 	tp->phy_reset_enable(ioaddr);
 	for (i = 0; i < 100; i++) {
@@ -1408,21 +1350,16 @@ static void rtl8169_phy_reset(struct net_device *dev,
 static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 {
 	void __iomem *ioaddr = tp->mmio_addr;
-	static int board_idx = -1;
-	u8 autoneg, duplex;
-	u16 speed;
-
-	board_idx++;
 
 	rtl8169_hw_phy_config(dev);
 
 	dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
 	RTL_W8(0x82, 0x01);
 
-	if (tp->mac_version < RTL_GIGA_MAC_VER_03) {
-		dprintk("Set PCI Latency=0x40\n");
-		pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
-	}
+	pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
+
+	if (tp->mac_version <= RTL_GIGA_MAC_VER_06)
+		pci_write_config_byte(tp->pci_dev, PCI_CACHE_LINE_SIZE, 0x08);
 
 	if (tp->mac_version == RTL_GIGA_MAC_VER_02) {
 		dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
@@ -1431,16 +1368,52 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 		mdio_write(ioaddr, 0x0b, 0x0000); //w 0x0b 15 0 0
 	}
 
-	rtl8169_link_option(board_idx, &autoneg, &speed, &duplex);
-
 	rtl8169_phy_reset(dev, tp);
 
-	rtl8169_set_speed(dev, autoneg, speed, duplex);
+	/*
+	 * rtl8169_set_speed_xmii takes good care of the Fast Ethernet
+	 * only 8101. Don't panic.
+	 */
+	rtl8169_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL);
 
 	if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp))
 		printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name);
 }
 
+static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	u32 high;
+	u32 low;
+
+	low  = addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24);
+	high = addr[4] | (addr[5] << 8);
+
+	spin_lock_irq(&tp->lock);
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
+	RTL_W32(MAC0, low);
+	RTL_W32(MAC4, high);
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
+	spin_unlock_irq(&tp->lock);
+}
+
+static int rtl_set_mac_address(struct net_device *dev, void *p)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	rtl_rar_set(tp, dev->dev_addr);
+
+	return 0;
+}
+
 static int rtl8169_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
@@ -1467,15 +1440,49 @@ static int rtl8169_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return -EOPNOTSUPP;
 }
 
+static const struct rtl_cfg_info {
+	void (*hw_start)(struct net_device *);
+	unsigned int region;
+	unsigned int align;
+	u16 intr_event;
+	u16 napi_event;
+} rtl_cfg_infos [] = {
+	[RTL_CFG_0] = {
+		.hw_start	= rtl_hw_start_8169,
+		.region		= 1,
+		.align		= 0,
+		.intr_event	= SYSErr | LinkChg | RxOverflow |
+				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow
+	},
+	[RTL_CFG_1] = {
+		.hw_start	= rtl_hw_start_8168,
+		.region		= 2,
+		.align		= 8,
+		.intr_event	= SYSErr | LinkChg | RxOverflow |
+				  TxErr | TxOK | RxOK | RxErr,
+		.napi_event	= TxErr | TxOK | RxOK | RxOverflow
+	},
+	[RTL_CFG_2] = {
+		.hw_start	= rtl_hw_start_8101,
+		.region		= 2,
+		.align		= 8,
+		.intr_event	= SYSErr | LinkChg | RxOverflow | PCSTimeout |
+				  RxFIFOOver | TxErr | TxOK | RxOK | RxErr,
+		.napi_event	= RxFIFOOver | TxErr | TxOK | RxOK | RxOverflow
+	}
+};
+
 static int __devinit
 rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	const unsigned int region = rtl_cfg_info[ent->driver_data].region;
+	const struct rtl_cfg_info *cfg = rtl_cfg_infos + ent->driver_data;
+	const unsigned int region = cfg->region;
 	struct rtl8169_private *tp;
 	struct net_device *dev;
 	void __iomem *ioaddr;
-	unsigned int pm_cap;
-	int i, rc;
+	unsigned int i;
+	int rc;
 
 	if (netif_msg_drv(&debug)) {
 		printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n",
@@ -1508,20 +1515,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc < 0)
 		goto err_out_disable_2;
 
-	/* save power state before pci_enable_device overwrites it */
-	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
-	if (pm_cap) {
-		u16 pwr_command, acpi_idle_state;
-
-		pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command);
-		acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK;
-	} else {
-		if (netif_msg_probe(tp)) {
-			dev_err(&pdev->dev,
-				"PowerManagement capability not found.\n");
-		}
-	}
-
 	/* make sure PCI base addr 1 is MMIO */
 	if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
 		if (netif_msg_probe(tp)) {
@@ -1585,7 +1578,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	RTL_W8(ChipCmd, CmdReset);
 
 	/* Check that the chip has finished the reset. */
-	for (i = 100; i > 0; i--) {
+	for (i = 0; i < 100; i++) {
 		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
 			break;
 		msleep_interruptible(1);
@@ -1647,11 +1640,12 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops);
 	dev->stop = rtl8169_close;
 	dev->tx_timeout = rtl8169_tx_timeout;
-	dev->set_multicast_list = rtl8169_set_rx_mode;
+	dev->set_multicast_list = rtl_set_rx_mode;
 	dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
 	dev->irq = pdev->irq;
 	dev->base_addr = (unsigned long) ioaddr;
 	dev->change_mtu = rtl8169_change_mtu;
+	dev->set_mac_address = rtl_set_mac_address;
 
 #ifdef CONFIG_R8169_NAPI
 	dev->poll = rtl8169_poll;
@@ -1670,7 +1664,10 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	tp->intr_mask = 0xffff;
 	tp->pci_dev = pdev;
 	tp->mmio_addr = ioaddr;
-	tp->align = rtl_cfg_info[ent->driver_data].align;
+	tp->align = cfg->align;
+	tp->hw_start = cfg->hw_start;
+	tp->intr_event = cfg->intr_event;
+	tp->napi_event = cfg->napi_event;
 
 	init_timer(&tp->timer);
 	tp->timer.data = (unsigned long) dev;
@@ -1685,15 +1682,17 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_set_drvdata(pdev, dev);
 
 	if (netif_msg_probe(tp)) {
+		u32 xid = RTL_R32(TxConfig) & 0x7cf0f8ff;
+
 		printk(KERN_INFO "%s: %s at 0x%lx, "
 		       "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
-		       "IRQ %d\n",
+		       "XID %08x IRQ %d\n",
 		       dev->name,
 		       rtl_chip_info[tp->chipset].name,
 		       dev->base_addr,
 		       dev->dev_addr[0], dev->dev_addr[1],
 		       dev->dev_addr[2], dev->dev_addr[3],
-		       dev->dev_addr[4], dev->dev_addr[5], dev->irq);
+		       dev->dev_addr[4], dev->dev_addr[5], xid, dev->irq);
 	}
 
 	rtl8169_init_phy(dev, tp);
@@ -1714,15 +1713,11 @@ err_out_free_dev_1:
 	goto out;
 }
 
-static void __devexit
-rtl8169_remove_one(struct pci_dev *pdev)
+static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	assert(dev != NULL);
-	assert(tp != NULL);
-
 	flush_scheduled_work();
 
 	unregister_netdev(dev);
@@ -1774,7 +1769,7 @@ static int rtl8169_open(struct net_device *dev)
 	if (retval < 0)
 		goto err_release_ring_2;
 
-	rtl8169_hw_start(dev);
+	rtl_hw_start(dev);
 
 	rtl8169_request_timer(dev);
 
@@ -1805,7 +1800,7 @@ static void rtl8169_hw_reset(void __iomem *ioaddr)
 	RTL_R8(ChipCmd);
 }
 
-static void rtl8169_set_rx_tx_config_registers(struct rtl8169_private *tp)
+static void rtl_set_rx_tx_config_registers(struct rtl8169_private *tp)
 {
 	void __iomem *ioaddr = tp->mmio_addr;
 	u32 cfg = rtl8169_rx_config;
@@ -1818,45 +1813,90 @@ static void rtl8169_set_rx_tx_config_registers(struct rtl8169_private *tp)
 		(InterFrameGap << TxInterFrameGapShift));
 }
 
-static void rtl8169_hw_start(struct net_device *dev)
+static void rtl_hw_start(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
-	struct pci_dev *pdev = tp->pci_dev;
-	u16 cmd;
-	u32 i;
+	unsigned int i;
 
 	/* Soft reset the chip. */
 	RTL_W8(ChipCmd, CmdReset);
 
 	/* Check that the chip has finished the reset. */
-	for (i = 100; i > 0; i--) {
+	for (i = 0; i < 100; i++) {
 		if ((RTL_R8(ChipCmd) & CmdReset) == 0)
 			break;
 		msleep_interruptible(1);
 	}
 
-	if (tp->mac_version == RTL_GIGA_MAC_VER_05) {
-		RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | PCIMulRW);
-		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x08);
-	}
+	tp->hw_start(dev);
 
-	if (tp->mac_version == RTL_GIGA_MAC_VER_13) {
-		pci_write_config_word(pdev, 0x68, 0x00);
-		pci_write_config_word(pdev, 0x69, 0x08);
-	}
+	netif_start_queue(dev);
+}
 
-	/* Undocumented stuff. */
-	if (tp->mac_version == RTL_GIGA_MAC_VER_05) {
-		/* Realtek's r1000_n.c driver uses '&& 0x01' here. Well... */
-		if ((RTL_R8(Config2) & 0x07) & 0x01)
-			RTL_W32(0x7c, 0x0007ffff);
 
-		RTL_W32(0x7c, 0x0007ff00);
+static void rtl_set_rx_tx_desc_registers(struct rtl8169_private *tp,
+					 void __iomem *ioaddr)
+{
+	/*
+	 * Magic spell: some iop3xx ARM board needs the TxDescAddrHigh
+	 * register to be written before TxDescAddrLow to work.
+	 * Switching from MMIO to I/O access fixes the issue as well.
+	 */
+	RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr) >> 32);
+	RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr) & DMA_32BIT_MASK);
+	RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr) >> 32);
+	RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr) & DMA_32BIT_MASK);
+}
+
+static u16 rtl_rw_cpluscmd(void __iomem *ioaddr)
+{
+	u16 cmd;
+
+	cmd = RTL_R16(CPlusCmd);
+	RTL_W16(CPlusCmd, cmd);
+	return cmd;
+}
+
+static void rtl_set_rx_max_size(void __iomem *ioaddr)
+{
+	/* Low hurts. Let's disable the filtering. */
+	RTL_W16(RxMaxSize, 16383);
+}
+
+static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
+{
+	struct {
+		u32 mac_version;
+		u32 clk;
+		u32 val;
+	} cfg2_info [] = {
+		{ RTL_GIGA_MAC_VER_05, PCI_Clock_33MHz, 0x000fff00 }, // 8110SCd
+		{ RTL_GIGA_MAC_VER_05, PCI_Clock_66MHz, 0x000fffff },
+		{ RTL_GIGA_MAC_VER_06, PCI_Clock_33MHz, 0x00ffff00 }, // 8110SCe
+		{ RTL_GIGA_MAC_VER_06, PCI_Clock_66MHz, 0x00ffffff }
+	}, *p = cfg2_info;
+	unsigned int i;
+	u32 clk;
 
-		pci_read_config_word(pdev, PCI_COMMAND, &cmd);
-		cmd = cmd & 0xef;
-		pci_write_config_word(pdev, PCI_COMMAND, cmd);
+	clk = RTL_R8(Config2) & PCI_Clock_66MHz;
+	for (i = 0; i < ARRAY_SIZE(cfg2_info); i++) {
+		if ((p->mac_version == mac_version) && (p->clk == clk)) {
+			RTL_W32(0x7c, p->val);
+			break;
+		}
+	}
+}
+
+static void rtl_hw_start_8169(struct net_device *dev)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	struct pci_dev *pdev = tp->pci_dev;
+
+	if (tp->mac_version == RTL_GIGA_MAC_VER_05) {
+		RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | PCIMulRW);
+		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, 0x08);
 	}
 
 	RTL_W8(Cfg9346, Cfg9346_Unlock);
@@ -1868,19 +1908,11 @@ static void rtl8169_hw_start(struct net_device *dev)
 
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	/* Low hurts. Let's disable the filtering. */
-	RTL_W16(RxMaxSize, 16383);
-
-	if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_02) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_03) ||
-	    (tp->mac_version == RTL_GIGA_MAC_VER_04))
-		rtl8169_set_rx_tx_config_registers(tp);
+	rtl_set_rx_max_size(ioaddr);
 
-	cmd = RTL_R16(CPlusCmd);
-	RTL_W16(CPlusCmd, cmd);
+	rtl_set_rx_tx_config_registers(tp);
 
-	tp->cp_cmd |= cmd | PCIMulRW;
+	tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
 
 	if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
 	    (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
@@ -1891,29 +1923,15 @@ static void rtl8169_hw_start(struct net_device *dev)
 
 	RTL_W16(CPlusCmd, tp->cp_cmd);
 
+	rtl8169_set_magic_reg(ioaddr, tp->mac_version);
+
 	/*
 	 * Undocumented corner. Supposedly:
 	 * (TxTimer << 12) | (TxPackets << 8) | (RxTimer << 4) | RxPackets
 	 */
 	RTL_W16(IntrMitigate, 0x0000);
 
-	/*
-	 * Magic spell: some iop3xx ARM board needs the TxDescAddrHigh
-	 * register to be written before TxDescAddrLow to work.
-	 * Switching from MMIO to I/O access fixes the issue as well.
-	 */
-	RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr >> 32));
-	RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr & DMA_32BIT_MASK));
-	RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr >> 32));
-	RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr & DMA_32BIT_MASK));
-
-	if ((tp->mac_version != RTL_GIGA_MAC_VER_01) &&
-	    (tp->mac_version != RTL_GIGA_MAC_VER_02) &&
-	    (tp->mac_version != RTL_GIGA_MAC_VER_03) &&
-	    (tp->mac_version != RTL_GIGA_MAC_VER_04)) {
-		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
-		rtl8169_set_rx_tx_config_registers(tp);
-	}
+	rtl_set_rx_tx_desc_registers(tp, ioaddr);
 
 	RTL_W8(Cfg9346, Cfg9346_Lock);
 
@@ -1922,15 +1940,107 @@ static void rtl8169_hw_start(struct net_device *dev)
 
 	RTL_W32(RxMissed, 0);
 
-	rtl8169_set_rx_mode(dev);
+	rtl_set_rx_mode(dev);
 
 	/* no early-rx interrupts */
 	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
 
 	/* Enable all known interrupts by setting the interrupt mask. */
-	RTL_W16(IntrMask, rtl8169_intr_mask);
+	RTL_W16(IntrMask, tp->intr_event);
 
-	netif_start_queue(dev);
+	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+}
+
+static void rtl_hw_start_8168(struct net_device *dev)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	struct pci_dev *pdev = tp->pci_dev;
+	u8 ctl;
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+	RTL_W8(EarlyTxThres, EarlyTxThld);
+
+	rtl_set_rx_max_size(ioaddr);
+
+	rtl_set_rx_tx_config_registers(tp);
+
+	tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
+
+	RTL_W16(CPlusCmd, tp->cp_cmd);
+
+	/* Tx performance tweak. */
+	pci_read_config_byte(pdev, 0x69, &ctl);
+	ctl = (ctl & ~0x70) | 0x50;
+	pci_write_config_byte(pdev, 0x69, ctl);
+
+	RTL_W16(IntrMitigate, 0x5151);
+
+	/* Work around for RxFIFO overflow. */
+	if (tp->mac_version == RTL_GIGA_MAC_VER_11) {
+		tp->intr_event |= RxFIFOOver | PCSTimeout;
+		tp->intr_event &= ~RxOverflow;
+	}
+
+	rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
+	RTL_R8(IntrMask);
+
+	RTL_W32(RxMissed, 0);
+
+	rtl_set_rx_mode(dev);
+
+	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000);
+
+	RTL_W16(IntrMask, tp->intr_event);
+}
+
+static void rtl_hw_start_8101(struct net_device *dev)
+{
+	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	struct pci_dev *pdev = tp->pci_dev;
+
+	if (tp->mac_version == RTL_GIGA_MAC_VER_13) {
+		pci_write_config_word(pdev, 0x68, 0x00);
+		pci_write_config_word(pdev, 0x69, 0x08);
+	}
+
+	RTL_W8(Cfg9346, Cfg9346_Unlock);
+
+	RTL_W8(EarlyTxThres, EarlyTxThld);
+
+	rtl_set_rx_max_size(ioaddr);
+
+	tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
+
+	RTL_W16(CPlusCmd, tp->cp_cmd);
+
+	RTL_W16(IntrMitigate, 0x0000);
+
+	rtl_set_rx_tx_desc_registers(tp, ioaddr);
+
+	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+	rtl_set_rx_tx_config_registers(tp);
+
+	RTL_W8(Cfg9346, Cfg9346_Lock);
+
+	RTL_R8(IntrMask);
+
+	RTL_W32(RxMissed, 0);
+
+	rtl_set_rx_mode(dev);
+
+	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
+
+	RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xf000);
+
+	RTL_W16(IntrMask, tp->intr_event);
 }
 
 static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
@@ -1956,7 +2066,7 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
 
 	netif_poll_enable(dev);
 
-	rtl8169_hw_start(dev);
+	rtl_hw_start(dev);
 
 	rtl8169_request_timer(dev);
 
@@ -1997,38 +2107,38 @@ static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
 	rtl8169_mark_to_asic(desc, rx_buf_sz);
 }
 
-static int rtl8169_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff,
-				struct RxDesc *desc, int rx_buf_sz,
-				unsigned int align)
+static struct sk_buff *rtl8169_alloc_rx_skb(struct pci_dev *pdev,
+					    struct net_device *dev,
+					    struct RxDesc *desc, int rx_buf_sz,
+					    unsigned int align)
 {
 	struct sk_buff *skb;
 	dma_addr_t mapping;
-	int ret = 0;
+	unsigned int pad;
 
-	skb = dev_alloc_skb(rx_buf_sz + align);
+	pad = align ? align : NET_IP_ALIGN;
+
+	skb = netdev_alloc_skb(dev, rx_buf_sz + pad);
 	if (!skb)
 		goto err_out;
 
-	skb_reserve(skb, (align - 1) & (unsigned long)skb->data);
-	*sk_buff = skb;
+	skb_reserve(skb, align ? ((pad - 1) & (unsigned long)skb->data) : pad);
 
 	mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
 				 PCI_DMA_FROMDEVICE);
 
 	rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
-
 out:
-	return ret;
+	return skb;
 
 err_out:
-	ret = -ENOMEM;
 	rtl8169_make_unusable_by_asic(desc);
 	goto out;
 }
 
 static void rtl8169_rx_clear(struct rtl8169_private *tp)
 {
-	int i;
+	unsigned int i;
 
 	for (i = 0; i < NUM_RX_DESC; i++) {
 		if (tp->Rx_skbuff[i]) {
@@ -2043,16 +2153,22 @@ static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev,
 {
 	u32 cur;
 
-	for (cur = start; end - cur > 0; cur++) {
-		int ret, i = cur % NUM_RX_DESC;
+	for (cur = start; end - cur != 0; cur++) {
+		struct sk_buff *skb;
+		unsigned int i = cur % NUM_RX_DESC;
+
+		WARN_ON((s32)(end - cur) < 0);
 
 		if (tp->Rx_skbuff[i])
 			continue;
 
-		ret = rtl8169_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i,
-			tp->RxDescArray + i, tp->rx_buf_sz, tp->align);
-		if (ret < 0)
+		skb = rtl8169_alloc_rx_skb(tp->pci_dev, dev,
+					   tp->RxDescArray + i,
+					   tp->rx_buf_sz, tp->align);
+		if (!skb)
 			break;
+
+		tp->Rx_skbuff[i] = skb;
 	}
 	return cur - start;
 }
@@ -2164,14 +2280,9 @@ static void rtl8169_reinit_task(struct work_struct *work)
 
 	ret = rtl8169_open(dev);
 	if (unlikely(ret < 0)) {
-		if (net_ratelimit()) {
-			struct rtl8169_private *tp = netdev_priv(dev);
-
-			if (netif_msg_drv(tp)) {
-				printk(PFX KERN_ERR
-				       "%s: reinit failure (status = %d)."
-				       " Rescheduling.\n", dev->name, ret);
-			}
+		if (net_ratelimit() && netif_msg_drv(tp)) {
+			printk(PFX KERN_ERR "%s: reinit failure (status = %d)."
+			       " Rescheduling.\n", dev->name, ret);
 		}
 		rtl8169_schedule_work(dev, rtl8169_reinit_task);
 	}
@@ -2198,16 +2309,12 @@ static void rtl8169_reset_task(struct work_struct *work)
 
 	if (tp->dirty_rx == tp->cur_rx) {
 		rtl8169_init_ring_indexes(tp);
-		rtl8169_hw_start(dev);
+		rtl_hw_start(dev);
 		netif_wake_queue(dev);
 	} else {
-		if (net_ratelimit()) {
-			struct rtl8169_private *tp = netdev_priv(dev);
-
-			if (netif_msg_intr(tp)) {
-				printk(PFX KERN_EMERG
-				       "%s: Rx buffers shortage\n", dev->name);
-			}
+		if (net_ratelimit() && netif_msg_intr(tp)) {
+			printk(PFX KERN_EMERG "%s: Rx buffers shortage\n",
+			       dev->name);
 		}
 		rtl8169_schedule_work(dev, rtl8169_reset_task);
 	}
@@ -2344,7 +2451,7 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	smp_wmb();
 
-	RTL_W8(TxPoll, 0x40);	/* set polling bit */
+	RTL_W8(TxPoll, NPQ);	/* set polling bit */
 
 	if (TX_BUFFS_AVAIL(tp) < MAX_SKB_FRAGS) {
 		netif_stop_queue(dev);
@@ -2414,16 +2521,12 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
 	rtl8169_schedule_work(dev, rtl8169_reinit_task);
 }
 
-static void
-rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
-		     void __iomem *ioaddr)
+static void rtl8169_tx_interrupt(struct net_device *dev,
+				 struct rtl8169_private *tp,
+				 void __iomem *ioaddr)
 {
 	unsigned int dirty_tx, tx_left;
 
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
 	dirty_tx = tp->dirty_tx;
 	smp_rmb();
 	tx_left = tp->cur_tx - dirty_tx;
@@ -2480,38 +2583,37 @@ static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
 		skb->ip_summed = CHECKSUM_NONE;
 }
 
-static inline int rtl8169_try_rx_copy(struct sk_buff **sk_buff, int pkt_size,
-				      struct RxDesc *desc, int rx_buf_sz,
-				      unsigned int align)
+static inline bool rtl8169_try_rx_copy(struct sk_buff **sk_buff,
+				       struct rtl8169_private *tp, int pkt_size,
+				       dma_addr_t addr)
 {
-	int ret = -1;
+	struct sk_buff *skb;
+	bool done = false;
 
-	if (pkt_size < rx_copybreak) {
-		struct sk_buff *skb;
+	if (pkt_size >= rx_copybreak)
+		goto out;
 
-		skb = dev_alloc_skb(pkt_size + align);
-		if (skb) {
-			skb_reserve(skb, (align - 1) & (unsigned long)skb->data);
-			eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0);
-			*sk_buff = skb;
-			rtl8169_mark_to_asic(desc, rx_buf_sz);
-			ret = 0;
-		}
-	}
-	return ret;
+	skb = netdev_alloc_skb(tp->dev, pkt_size + NET_IP_ALIGN);
+	if (!skb)
+		goto out;
+
+	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
+				    PCI_DMA_FROMDEVICE);
+	skb_reserve(skb, NET_IP_ALIGN);
+	skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
+	*sk_buff = skb;
+	done = true;
+out:
+	return done;
 }
 
-static int
-rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
-		     void __iomem *ioaddr)
+static int rtl8169_rx_interrupt(struct net_device *dev,
+				struct rtl8169_private *tp,
+				void __iomem *ioaddr)
 {
 	unsigned int cur_rx, rx_left;
 	unsigned int delta, count;
 
-	assert(dev != NULL);
-	assert(tp != NULL);
-	assert(ioaddr != NULL);
-
 	cur_rx = tp->cur_rx;
 	rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
 	rx_left = rtl8169_rx_quota(rx_left, (u32) dev->quota);
@@ -2544,9 +2646,9 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 			rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 		} else {
 			struct sk_buff *skb = tp->Rx_skbuff[entry];
+			dma_addr_t addr = le64_to_cpu(desc->addr);
 			int pkt_size = (status & 0x00001FFF) - 4;
-			void (*pci_action)(struct pci_dev *, dma_addr_t,
-				size_t, int) = pci_dma_sync_single_for_device;
+			struct pci_dev *pdev = tp->pci_dev;
 
 			/*
 			 * The driver does not support incoming fragmented
@@ -2562,19 +2664,16 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 
 			rtl8169_rx_csum(skb, desc);
 
-			pci_dma_sync_single_for_cpu(tp->pci_dev,
-				le64_to_cpu(desc->addr), tp->rx_buf_sz,
-				PCI_DMA_FROMDEVICE);
-
-			if (rtl8169_try_rx_copy(&skb, pkt_size, desc,
-						tp->rx_buf_sz, tp->align)) {
-				pci_action = pci_unmap_single;
+			if (rtl8169_try_rx_copy(&skb, tp, pkt_size, addr)) {
+				pci_dma_sync_single_for_device(pdev, addr,
+					pkt_size, PCI_DMA_FROMDEVICE);
+				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+			} else {
+				pci_unmap_single(pdev, addr, pkt_size,
+						 PCI_DMA_FROMDEVICE);
 				tp->Rx_skbuff[entry] = NULL;
 			}
 
-			pci_action(tp->pci_dev, le64_to_cpu(desc->addr),
-				   tp->rx_buf_sz, PCI_DMA_FROMDEVICE);
-
 			skb_put(skb, pkt_size);
 			skb->protocol = eth_type_trans(skb, dev);
 
@@ -2585,6 +2684,13 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 			tp->stats.rx_bytes += pkt_size;
 			tp->stats.rx_packets++;
 		}
+
+		/* Work around for AMD plateform. */
+		if ((desc->opts2 & 0xfffe000) &&
+		    (tp->mac_version == RTL_GIGA_MAC_VER_05)) {
+			desc->opts2 = 0;
+			cur_rx++;
+		}
 	}
 
 	count = cur_rx - tp->cur_rx;
@@ -2608,11 +2714,9 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 	return count;
 }
 
-/* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */
-static irqreturn_t
-rtl8169_interrupt(int irq, void *dev_instance)
+static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 {
-	struct net_device *dev = (struct net_device *) dev_instance;
+	struct net_device *dev = dev_instance;
 	struct rtl8169_private *tp = netdev_priv(dev);
 	int boguscnt = max_interrupt_work;
 	void __iomem *ioaddr = tp->mmio_addr;
@@ -2637,9 +2741,17 @@ rtl8169_interrupt(int irq, void *dev_instance)
 		RTL_W16(IntrStatus,
 			(status & RxFIFOOver) ? (status | RxOverflow) : status);
 
-		if (!(status & rtl8169_intr_mask))
+		if (!(status & tp->intr_event))
 			break;
 
+                /* Work around for rx fifo overflow */
+                if (unlikely(status & RxFIFOOver) &&
+		    (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+			netif_stop_queue(dev);
+			rtl8169_tx_timeout(dev);
+			break;
+		}
+
 		if (unlikely(status & SYSErr)) {
 			rtl8169_pcierr_interrupt(dev);
 			break;
@@ -2649,8 +2761,8 @@ rtl8169_interrupt(int irq, void *dev_instance)
 			rtl8169_check_link_status(dev, tp, ioaddr);
 
 #ifdef CONFIG_R8169_NAPI
-		RTL_W16(IntrMask, rtl8169_intr_mask & ~rtl8169_napi_event);
-		tp->intr_mask = ~rtl8169_napi_event;
+		RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+		tp->intr_mask = ~tp->napi_event;
 
 		if (likely(netif_rx_schedule_prep(dev)))
 			__netif_rx_schedule(dev);
@@ -2661,9 +2773,9 @@ rtl8169_interrupt(int irq, void *dev_instance)
 		break;
 #else
 		/* Rx interrupt */
-		if (status & (RxOK | RxOverflow | RxFIFOOver)) {
+		if (status & (RxOK | RxOverflow | RxFIFOOver))
 			rtl8169_rx_interrupt(dev, tp, ioaddr);
-		}
+
 		/* Tx interrupt */
 		if (status & (TxOK | TxErr))
 			rtl8169_tx_interrupt(dev, tp, ioaddr);
@@ -2707,7 +2819,7 @@ static int rtl8169_poll(struct net_device *dev, int *budget)
 		 * write is safe - FR
 		 */
 		smp_wmb();
-		RTL_W16(IntrMask, rtl8169_intr_mask);
+		RTL_W16(IntrMask, tp->intr_event);
 	}
 
 	return (work_done >= work_to_do);
@@ -2789,14 +2901,13 @@ static int rtl8169_close(struct net_device *dev)
 	return 0;
 }
 
-static void
-rtl8169_set_rx_mode(struct net_device *dev)
+static void rtl_set_rx_mode(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
 	unsigned long flags;
 	u32 mc_filter[2];	/* Multicast hash filter */
-	int i, rx_mode;
+	int rx_mode;
 	u32 tmp = 0;
 
 	if (dev->flags & IFF_PROMISC) {
@@ -2816,6 +2927,8 @@ rtl8169_set_rx_mode(struct net_device *dev)
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
 	} else {
 		struct dev_mc_list *mclist;
+		unsigned int i;
+
 		rx_mode = AcceptBroadcast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0;
 		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
@@ -2840,10 +2953,11 @@ rtl8169_set_rx_mode(struct net_device *dev)
 		mc_filter[1] = 0xffffffff;
 	}
 
-	RTL_W32(RxConfig, tmp);
 	RTL_W32(MAR0 + 0, mc_filter[0]);
 	RTL_W32(MAR0 + 4, mc_filter[1]);
 
+	RTL_W32(RxConfig, tmp);
+
 	spin_unlock_irqrestore(&tp->lock, flags);
 }
 
@@ -2931,14 +3045,12 @@ static struct pci_driver rtl8169_pci_driver = {
 #endif
 };
 
-static int __init
-rtl8169_init_module(void)
+static int __init rtl8169_init_module(void)
 {
 	return pci_register_driver(&rtl8169_pci_driver);
 }
 
-static void __exit
-rtl8169_cleanup_module(void)
+static void __exit rtl8169_cleanup_module(void)
 {
 	pci_unregister_driver(&rtl8169_pci_driver);
 }
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 25c73d47daad..5c2e41fac6d2 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -516,7 +516,7 @@ static unsigned int write_eeprom(struct rr_private *rrpriv,
 }
 
 
-static int __init rr_init(struct net_device *dev)
+static int __devinit rr_init(struct net_device *dev)
 {
 	struct rr_private *rrpriv;
 	struct rr_regs __iomem *regs;
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 09078ff84cd2..58bbfdd4f901 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -469,11 +469,18 @@ static struct pci_device_id s2io_tbl[] __devinitdata = {
 
 MODULE_DEVICE_TABLE(pci, s2io_tbl);
 
+static struct pci_error_handlers s2io_err_handler = {
+	.error_detected = s2io_io_error_detected,
+	.slot_reset = s2io_io_slot_reset,
+	.resume = s2io_io_resume,
+};
+
 static struct pci_driver s2io_driver = {
       .name = "S2IO",
       .id_table = s2io_tbl,
       .probe = s2io_init_nic,
       .remove = __devexit_p(s2io_rem_nic),
+      .err_handler = &s2io_err_handler,
 };
 
 /* A simplifier macro used both by init and free shared_mem Fns(). */
@@ -1128,7 +1135,7 @@ static int init_nic(struct s2io_nic *nic)
 	 * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
 	 */
 	if ((nic->device_type == XFRAME_I_DEVICE) &&
-		(get_xena_rev_id(nic->pdev) < 4))
+		(nic->pdev->revision < 4))
 		writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
 
 	val64 = readq(&bar0->tx_fifo_partition_0);
@@ -1866,7 +1873,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
 	herc = (sp->device_type == XFRAME_II_DEVICE);
 
 	if (flag == FALSE) {
-		if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
+		if ((!herc && (sp->pdev->revision >= 4)) || herc) {
 			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
 				ret = 1;
 		} else {
@@ -1874,7 +1881,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
 				ret = 1;
 		}
 	} else {
-		if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
+		if ((!herc && (sp->pdev->revision >= 4)) || herc) {
 			if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
 			     ADAPTER_STATUS_RMAC_PCC_IDLE))
 				ret = 1;
@@ -2689,6 +2696,9 @@ static void s2io_netpoll(struct net_device *dev)
 	u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
 	int i;
 
+	if (pci_channel_offline(nic->pdev))
+		return;
+
 	disable_irq(dev->irq);
 
 	atomic_inc(&nic->isr_cnt);
@@ -3215,6 +3225,8 @@ static void alarm_intr_handler(struct s2io_nic *nic)
 	int i;
 	if (atomic_read(&nic->card_state) == CARD_DOWN)
 		return;
+	if (pci_channel_offline(nic->pdev))
+		return;
 	nic->mac_control.stats_info->sw_stat.ring_full_cnt = 0;
 	/* Handling the XPAK counters update */
 	if(nic->mac_control.stats_info->xpak_stat.xpak_timer_count < 72000) {
@@ -3958,7 +3970,6 @@ static int s2io_close(struct net_device *dev)
 	/* Reset card, kill tasklet and free Tx and Rx buffers. */
 	s2io_card_down(sp);
 
-	sp->device_close_flag = TRUE;	/* Device is shut down. */
 	return 0;
 }
 
@@ -4314,6 +4325,10 @@ static irqreturn_t s2io_isr(int irq, void *dev_id)
 	struct mac_info *mac_control;
 	struct config_param *config;
 
+	/* Pretend we handled any irq's from a disconnected card */
+	if (pci_channel_offline(sp->pdev))
+		return IRQ_NONE;
+
 	atomic_inc(&sp->isr_cnt);
 	mac_control = &sp->mac_control;
 	config = &sp->config;
@@ -6569,7 +6584,7 @@ static void s2io_rem_isr(struct s2io_nic * sp)
 	} while(cnt < 5);
 }
 
-static void s2io_card_down(struct s2io_nic * sp)
+static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
 {
 	int cnt = 0;
 	struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -6584,7 +6599,8 @@ static void s2io_card_down(struct s2io_nic * sp)
 	atomic_set(&sp->card_state, CARD_DOWN);
 
 	/* disable Tx and Rx traffic on the NIC */
-	stop_nic(sp);
+	if (do_io)
+		stop_nic(sp);
 
 	s2io_rem_isr(sp);
 
@@ -6592,7 +6608,7 @@ static void s2io_card_down(struct s2io_nic * sp)
 	tasklet_kill(&sp->task);
 
 	/* Check if the device is Quiescent and then Reset the NIC */
-	do {
+	while(do_io) {
 		/* As per the HW requirement we need to replenish the
 		 * receive buffer to avoid the ring bump. Since there is
 		 * no intention of processing the Rx frame at this pointwe are
@@ -6617,8 +6633,9 @@ static void s2io_card_down(struct s2io_nic * sp)
 				  (unsigned long long) val64);
 			break;
 		}
-	} while (1);
-	s2io_reset(sp);
+	}
+	if (do_io)
+		s2io_reset(sp);
 
 	spin_lock_irqsave(&sp->tx_lock, flags);
 	/* Free all Tx buffers */
@@ -6633,6 +6650,11 @@ static void s2io_card_down(struct s2io_nic * sp)
 	clear_bit(0, &(sp->link_state));
 }
 
+static void s2io_card_down(struct s2io_nic * sp)
+{
+	do_s2io_card_down(sp, 1);
+}
+
 static int s2io_card_up(struct s2io_nic * sp)
 {
 	int i, ret = 0;
@@ -7054,23 +7076,6 @@ static void s2io_link(struct s2io_nic * sp, int link)
 }
 
 /**
- *  get_xena_rev_id - to identify revision ID of xena.
- *  @pdev : PCI Dev structure
- *  Description:
- *  Function to identify the Revision ID of xena.
- *  Return value:
- *  returns the revision ID of the device.
- */
-
-static int get_xena_rev_id(struct pci_dev *pdev)
-{
-	u8 id = 0;
-	int ret;
-	ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
-	return id;
-}
-
-/**
  *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
  *  @sp : private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
@@ -7528,7 +7533,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	s2io_vpd_read(sp);
 	DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
 	DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
-		  sp->product_name, get_xena_rev_id(sp->pdev));
+		  sp->product_name, pdev->revision);
 	DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
 		  s2io_driver_version);
 	DBG_PRINT(ERR_DBG, "%s: MAC ADDR: "
@@ -8010,3 +8015,85 @@ static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
 	sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
 	return;
 }
+
+/**
+ * s2io_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
+                                               pci_channel_state_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct s2io_nic *sp = netdev->priv;
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev)) {
+		/* Bring down the card, while avoiding PCI I/O */
+		do_s2io_card_down(sp, 0);
+	}
+	pci_disable_device(pdev);
+
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * s2io_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ * At this point, the card has exprienced a hard reset,
+ * followed by fixups by BIOS, and has its config space
+ * set up identically to what it was at cold boot.
+ */
+static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct s2io_nic *sp = netdev->priv;
+
+	if (pci_enable_device(pdev)) {
+		printk(KERN_ERR "s2io: "
+		       "Cannot re-enable PCI device after reset.\n");
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+
+	pci_set_master(pdev);
+	s2io_reset(sp);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * s2io_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells
+ * us that its OK to resume normal operation.
+ */
+static void s2io_io_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct s2io_nic *sp = netdev->priv;
+
+	if (netif_running(netdev)) {
+		if (s2io_card_up(sp)) {
+			printk(KERN_ERR "s2io: "
+			       "Can't bring device back up after reset.\n");
+			return;
+		}
+
+		if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
+			s2io_card_down(sp);
+			printk(KERN_ERR "s2io: "
+			       "Can't resetore mac addr after reset.\n");
+			return;
+		}
+	}
+
+	netif_device_attach(netdev);
+	netif_wake_queue(netdev);
+}
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 54baa0b8ec7c..3887fe63a908 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -794,7 +794,6 @@ struct s2io_nic {
 
 	struct net_device_stats stats;
 	int high_dma_flag;
-	int device_close_flag;
 	int device_enabled_once;
 
 	char name[60];
@@ -1034,7 +1033,6 @@ static void s2io_set_link(struct work_struct *work);
 static int s2io_set_swapper(struct s2io_nic * sp);
 static void s2io_card_down(struct s2io_nic *nic);
 static int s2io_card_up(struct s2io_nic *nic);
-static int get_xena_rev_id(struct pci_dev *pdev);
 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
 					int bit_state);
 static int s2io_add_isr(struct s2io_nic * sp);
@@ -1052,6 +1050,11 @@ static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
 			   struct sk_buff *skb, u32 tcp_len);
 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring);
 
+static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
+			                      pci_channel_state_t state);
+static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev);
+static void s2io_io_resume(struct pci_dev *pdev);
+
 #define s2io_tcp_mss(skb) skb_shinfo(skb)->gso_size
 #define s2io_udp_mss(skb) skb_shinfo(skb)->gso_size
 #define s2io_offload_type(skb) skb_shinfo(skb)->gso_type
diff --git a/drivers/net/saa9730.c b/drivers/net/saa9730.c
index ad94358ece89..451486b32f23 100644
--- a/drivers/net/saa9730.c
+++ b/drivers/net/saa9730.c
@@ -690,9 +690,9 @@ static int lan_saa9730_rx(struct net_device *dev)
 				lp->stats.rx_packets++;
 				skb_reserve(skb, 2);	/* 16 byte align */
 				skb_put(skb, len);	/* make room */
-				eth_copy_and_sum(skb,
+				skb_copy_to_linear_data(skb,
 						 (unsigned char *) pData,
-						 len, 0);
+						 len);
 				skb->protocol = eth_type_trans(skb, dev);
 				netif_rx(skb);
 				dev->last_rx = jiffies;
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 2106becf6990..384b4685e977 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -320,7 +320,7 @@ static inline void sgiseeq_rx(struct net_device *dev, struct sgiseeq_private *sp
 				skb_put(skb, len);
 
 				/* Copy out of kseg1 to avoid silly cache flush. */
-				eth_copy_and_sum(skb, pkt_pointer + 2, len, 0);
+				skb_copy_to_linear_data(skb, pkt_pointer + 2, len);
 				skb->protocol = eth_type_trans(skb, dev);
 
 				/* We don't want to receive our own packets */
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index bc8de48da313..ec2ad9f0efa2 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -548,7 +548,7 @@ static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size,
 		skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
 		if (skb) {
 			skb_reserve(skb, NET_IP_ALIGN);
-			eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0);
+			skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size);
 			*sk_buff = skb;
 			sis190_give_to_asic(desc, rx_buf_sz);
 			ret = 0;
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 2cb2e156c758..7c6e4808399a 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -573,7 +573,7 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
  *	return error if it failed to found.
  */
 
-static int __init sis900_mii_probe(struct net_device * net_dev)
+static int __devinit sis900_mii_probe(struct net_device * net_dev)
 {
 	struct sis900_private * sis_priv = net_dev->priv;
 	const char *dev_name = pci_name(sis_priv->pci_dev);
diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile
deleted file mode 100644
index afd900d5d730..000000000000
--- a/drivers/net/sk98lin/Makefile
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# Makefile for the SysKonnect SK-98xx device driver.
-#
-
-
-#
-# Standalone driver params
-# SKPARAM += -DSK_KERNEL_24
-# SKPARAM += -DSK_KERNEL_24_26
-# SKPARAM += -DSK_KERNEL_26
-# SKPARAM += -DSK_KERNEL_22_24
-
-obj-$(CONFIG_SK98LIN) += sk98lin.o
-sk98lin-objs    :=	\
-		skge.o		\
-		skethtool.o	\
-		skdim.o		\
-		skaddr.o	\
-		skgehwt.o	\
-		skgeinit.o	\
-		skgepnmi.o	\
-		skgesirq.o	\
-		ski2c.o		\
-		sklm80.o	\
-		skqueue.o	\
-		skrlmt.o	\
-		sktimer.o	\
-		skvpd.o		\
-		skxmac2.o
-
-# DBGDEF =  \
-# -DDEBUG
-
-ifdef DEBUG
-DBGDEF +=  \
--DSK_DEBUG_CHKMOD=0x00000000L \
--DSK_DEBUG_CHKCAT=0x00000000L
-endif
-
-
-# **** possible debug modules for SK_DEBUG_CHKMOD *****************
-# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
-# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
-# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
-# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
-# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
-# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
-# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
-# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
-# SK_DBGMOD_DRV         0x00010000L     /* DRV module */
-
-# **** possible debug categories for SK_DEBUG_CHKCAT **************
-# *** common modules ***
-# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
-# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
-# SK_DBGCAT_ERR         0x00000004L     error handling paths
-# SK_DBGCAT_TX          0x00000008L     transmit path
-# SK_DBGCAT_RX          0x00000010L     receive path
-# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
-# SK_DBGCAT_QUEUE       0x00000040L     any queue management
-# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
-# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump
-
-# *** driver (file skge.c) ***
-# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
-# SK_DBGCAT_DRV_???             0x00020000      not used
-# SK_DBGCAT_DRV_MCA             0x00040000      multicast
-# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
-# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
-# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
-# SK_DBGCAT_DRV_???             0x00400000      not used
-# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
-# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
-# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
-# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
-# SK_DBGCAT_DRV_EVENT           0x08000000      driver events
-
-EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
-
-clean:
-	rm -f core *.o *.a *.s
-
-
-
-
-
-
diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h
deleted file mode 100644
index 4e2dbbf78000..000000000000
--- a/drivers/net/sk98lin/h/lm80.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/******************************************************************************
- *
- * Name:	lm80.h	
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.6 $
- * Date:	$Date: 2003/05/13 17:26:52 $
- * Purpose:	Contains all defines for the LM80 Chip
- *		(National Semiconductor).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_LM80_H
-#define __INC_LM80_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* __cplusplus */
-
-/* defines ********************************************************************/
-
-/*
- * LM80 register definition
- *
- * All registers are 8 bit wide
- */
-#define LM80_CFG			0x00	/* Configuration Register */
-#define LM80_ISRC_1			0x01	/* Interrupt Status Register 1 */
-#define LM80_ISRC_2			0x02	/* Interrupt Status Register 2 */
-#define LM80_IMSK_1			0x03	/* Interrupt Mask Register 1 */
-#define LM80_IMSK_2			0x04	/* Interrupt Mask Register 2 */
-#define LM80_FAN_CTRL		0x05	/* Fan Devisor/RST#/OS# Register */
-#define LM80_TEMP_CTRL		0x06	/* OS# Config, Temp Res. Reg */
-	/* 0x07 - 0x1f reserved	*/
-	/* current values */
-#define LM80_VT0_IN			0x20	/* current Voltage 0 value */
-#define LM80_VT1_IN			0x21	/* current Voltage 1 value */
-#define LM80_VT2_IN			0x22	/* current Voltage 2 value */
-#define LM80_VT3_IN			0x23	/* current Voltage 3 value */
-#define LM80_VT4_IN			0x24	/* current Voltage 4 value */
-#define LM80_VT5_IN			0x25	/* current Voltage 5 value */
-#define LM80_VT6_IN			0x26	/* current Voltage 6 value */
-#define LM80_TEMP_IN		0x27	/* current Temperature value */
-#define LM80_FAN1_IN		0x28	/* current Fan 1 count */
-#define LM80_FAN2_IN		0x29	/* current Fan 2 count */
-	/* limit values */
-#define LM80_VT0_HIGH_LIM	0x2a	/* high limit val for Voltage 0 */
-#define LM80_VT0_LOW_LIM	0x2b	/* low limit val for Voltage 0 */
-#define LM80_VT1_HIGH_LIM	0x2c	/* high limit val for Voltage 1 */
-#define LM80_VT1_LOW_LIM	0x2d	/* low limit val for Voltage 1 */
-#define LM80_VT2_HIGH_LIM	0x2e	/* high limit val for Voltage 2 */
-#define LM80_VT2_LOW_LIM	0x2f	/* low limit val for Voltage 2 */
-#define LM80_VT3_HIGH_LIM	0x30	/* high limit val for Voltage 3 */
-#define LM80_VT3_LOW_LIM	0x31	/* low limit val for Voltage 3 */
-#define LM80_VT4_HIGH_LIM	0x32	/* high limit val for Voltage 4 */
-#define LM80_VT4_LOW_LIM	0x33	/* low limit val for Voltage 4 */
-#define LM80_VT5_HIGH_LIM	0x34	/* high limit val for Voltage 5 */
-#define LM80_VT5_LOW_LIM	0x35	/* low limit val for Voltage 5 */
-#define LM80_VT6_HIGH_LIM	0x36	/* high limit val for Voltage 6 */
-#define LM80_VT6_LOW_LIM	0x37	/* low limit val for Voltage 6 */
-#define LM80_THOT_LIM_UP	0x38	/* hot temperature limit (high) */
-#define LM80_THOT_LIM_LO	0x39	/* hot temperature limit (low) */
-#define LM80_TOS_LIM_UP		0x3a	/* OS temperature limit (high) */
-#define LM80_TOS_LIM_LO		0x3b	/* OS temperature limit (low) */
-#define LM80_FAN1_COUNT_LIM	0x3c	/* Fan 1 count limit (high) */
-#define LM80_FAN2_COUNT_LIM	0x3d	/* Fan 2 count limit (low) */
-	/* 0x3e - 0x3f reserved	*/
-
-/*
- * LM80 bit definitions
- */
-
-/*	LM80_CFG		Configuration Register */
-#define LM80_CFG_START		(1<<0)	/* start monitoring operation */
-#define LM80_CFG_INT_ENA	(1<<1)	/* enables the INT# Interrupt output */
-#define LM80_CFG_INT_POL	(1<<2)	/* INT# pol: 0 act low, 1 act high */
-#define LM80_CFG_INT_CLR	(1<<3)	/* disables INT#/RST_OUT#/OS# outputs */
-#define LM80_CFG_RESET		(1<<4)	/* signals a reset */
-#define LM80_CFG_CHASS_CLR	(1<<5)	/* clears Chassis Intrusion (CI) pin */
-#define LM80_CFG_GPO		(1<<6)	/* drives the GPO# pin */
-#define LM80_CFG_INIT		(1<<7)	/* restore power on defaults */
-
-/*	LM80_ISRC_1		Interrupt Status Register 1 */
-/*	LM80_IMSK_1		Interrupt Mask Register 1 */
-#define LM80_IS_VT0			(1<<0)	/* limit exceeded for Voltage 0 */
-#define LM80_IS_VT1			(1<<1)	/* limit exceeded for Voltage 1 */
-#define LM80_IS_VT2			(1<<2)	/* limit exceeded for Voltage 2 */
-#define LM80_IS_VT3			(1<<3)	/* limit exceeded for Voltage 3 */
-#define LM80_IS_VT4			(1<<4)	/* limit exceeded for Voltage 4 */
-#define LM80_IS_VT5			(1<<5)	/* limit exceeded for Voltage 5 */
-#define LM80_IS_VT6			(1<<6)	/* limit exceeded for Voltage 6 */
-#define LM80_IS_INT_IN		(1<<7)	/* state of INT_IN# */
-
-/*	LM80_ISRC_2		Interrupt Status Register 2 */
-/*	LM80_IMSK_2		Interrupt Mask Register 2 */
-#define LM80_IS_TEMP		(1<<0)	/* HOT temperature limit exceeded */
-#define LM80_IS_BTI			(1<<1)	/* state of BTI# pin */
-#define LM80_IS_FAN1		(1<<2)	/* count limit exceeded for Fan 1 */
-#define LM80_IS_FAN2		(1<<3)	/* count limit exceeded for Fan 2 */
-#define LM80_IS_CI			(1<<4)	/* Chassis Intrusion occured */
-#define LM80_IS_OS			(1<<5)	/* OS temperature limit exceeded */
-	/* bit 6 and 7 are reserved in LM80_ISRC_2 */
-#define LM80_IS_HT_IRQ_MD	(1<<6)	/* Hot temperature interrupt mode */
-#define LM80_IS_OT_IRQ_MD	(1<<7)	/* OS temperature interrupt mode */
-
-/*	LM80_FAN_CTRL		Fan Devisor/RST#/OS# Register */
-#define LM80_FAN1_MD_SEL	(1<<0)	/* Fan 1 mode select */
-#define LM80_FAN2_MD_SEL	(1<<1)	/* Fan 2 mode select */
-#define LM80_FAN1_PRM_CTL	(3<<2)	/* Fan 1 speed control */
-#define LM80_FAN2_PRM_CTL	(3<<4)	/* Fan 2 speed control */
-#define LM80_FAN_OS_ENA		(1<<6)	/* enable OS mode on RST_OUT#/OS# pins*/
-#define LM80_FAN_RST_ENA	(1<<7)	/* sets RST_OUT#/OS# pins in RST mode */
-
-/*	LM80_TEMP_CTRL		OS# Config, Temp Res. Reg */
-#define LM80_TEMP_OS_STAT	(1<<0)	/* mirrors the state of RST_OUT#/OS# */
-#define LM80_TEMP_OS_POL	(1<<1)	/* select OS# polarity */
-#define LM80_TEMP_OS_MODE	(1<<2)	/* selects Interrupt mode */
-#define LM80_TEMP_RES		(1<<3)	/* selects 9 or 11 bit temp resulution*/
-#define LM80_TEMP_LSB		(0xf<<4)/* 4 LSBs of 11 bit temp data */
-#define LM80_TEMP_LSB_9		(1<<7)	/* LSB of 9 bit temperature data */
-
-	/* 0x07 - 0x1f reserved	*/
-/*	LM80_VT0_IN		current Voltage 0 value */
-/*	LM80_VT1_IN		current Voltage 1 value */
-/*	LM80_VT2_IN		current Voltage 2 value */
-/*	LM80_VT3_IN		current Voltage 3 value */
-/*	LM80_VT4_IN		current Voltage 4 value */
-/*	LM80_VT5_IN		current Voltage 5 value */
-/*	LM80_VT6_IN		current Voltage 6 value */
-/*	LM80_TEMP_IN		current temperature value */
-/*	LM80_FAN1_IN		current Fan 1 count */
-/*	LM80_FAN2_IN		current Fan 2 count */
-/*	LM80_VT0_HIGH_LIM	high limit val for Voltage 0 */
-/*	LM80_VT0_LOW_LIM	low limit val for Voltage 0 */
-/*	LM80_VT1_HIGH_LIM	high limit val for Voltage 1 */
-/*	LM80_VT1_LOW_LIM	low limit val for Voltage 1 */
-/*	LM80_VT2_HIGH_LIM	high limit val for Voltage 2 */
-/*	LM80_VT2_LOW_LIM	low limit val for Voltage 2 */
-/*	LM80_VT3_HIGH_LIM	high limit val for Voltage 3 */
-/*	LM80_VT3_LOW_LIM	low limit val for Voltage 3 */
-/*	LM80_VT4_HIGH_LIM	high limit val for Voltage 4 */
-/*	LM80_VT4_LOW_LIM	low limit val for Voltage 4 */
-/*	LM80_VT5_HIGH_LIM	high limit val for Voltage 5 */
-/*	LM80_VT5_LOW_LIM	low limit val for Voltage 5 */
-/*	LM80_VT6_HIGH_LIM	high limit val for Voltage 6 */
-/*	LM80_VT6_LOW_LIM	low limit val for Voltage 6 */
-/*	LM80_THOT_LIM_UP	hot temperature limit (high) */
-/*	LM80_THOT_LIM_LO	hot temperature limit (low) */
-/*	LM80_TOS_LIM_UP		OS temperature limit (high) */
-/*	LM80_TOS_LIM_LO		OS temperature limit (low) */
-/*	LM80_FAN1_COUNT_LIM	Fan 1 count limit (high) */
-/*	LM80_FAN2_COUNT_LIM	Fan 2 count limit (low) */
-	/* 0x3e - 0x3f reserved	*/
-
-#define LM80_ADDR		0x28	/* LM80 default addr */
-
-/* typedefs *******************************************************************/
-
-
-/* function prototypes ********************************************************/
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_LM80_H */
diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h
deleted file mode 100644
index 423ad063d09b..000000000000
--- a/drivers/net/sk98lin/h/skaddr.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/******************************************************************************
- *
- * Name:	skaddr.h
- * Project:	Gigabit Ethernet Adapters, ADDR-Modul
- * Version:	$Revision: 1.29 $
- * Date:	$Date: 2003/05/13 16:57:24 $
- * Purpose:	Header file for Address Management (MC, UC, Prom).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage multicast addresses and promiscuous mode
- * on GEnesis adapters.
- *
- * Include File Hierarchy:
- *
- *	"skdrv1st.h"
- *	...
- *	"sktypes.h"
- *	"skqueue.h"
- *	"skaddr.h"
- *	...
- *	"skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKADDR_H
-#define __INC_SKADDR_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* cplusplus */
-
-/* defines ********************************************************************/
-
-#define SK_MAC_ADDR_LEN				6	/* Length of MAC address. */
-#define	SK_MAX_ADDRS				14	/* #Addrs for exact match. */
-
-/* ----- Common return values ----- */
-
-#define SK_ADDR_SUCCESS				0	/* Function returned successfully. */
-#define SK_ADDR_ILLEGAL_PORT			100	/* Port number too high. */
-#define SK_ADDR_TOO_EARLY			101	/* Function called too early. */
-
-/* ----- Clear/Add flag bits ----- */
-
-#define SK_ADDR_PERMANENT			1	/* RLMT Address */
-
-/* ----- Additional Clear flag bits ----- */
-
-#define SK_MC_SW_ONLY				2	/* Do not update HW when clearing. */
-
-/* ----- Override flag bits ----- */
-
-#define SK_ADDR_LOGICAL_ADDRESS		0
-#define SK_ADDR_VIRTUAL_ADDRESS		(SK_ADDR_LOGICAL_ADDRESS)	/* old */
-#define SK_ADDR_PHYSICAL_ADDRESS	1
-#define SK_ADDR_CLEAR_LOGICAL		2
-#define SK_ADDR_SET_LOGICAL			4
-
-/* ----- Override return values ----- */
-
-#define SK_ADDR_OVERRIDE_SUCCESS	(SK_ADDR_SUCCESS)
-#define SK_ADDR_DUPLICATE_ADDRESS	1
-#define SK_ADDR_MULTICAST_ADDRESS	2
-
-/* ----- Partitioning of excact match table ----- */
-
-#define SK_ADDR_EXACT_MATCHES		16	/* #Exact match entries. */
-
-#define SK_ADDR_FIRST_MATCH_RLMT	1
-#define SK_ADDR_LAST_MATCH_RLMT		2
-#define SK_ADDR_FIRST_MATCH_DRV		3
-#define SK_ADDR_LAST_MATCH_DRV		(SK_ADDR_EXACT_MATCHES - 1)
-
-/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */
-
-#define SK_MC_FILTERING_EXACT		0	/* Exact filtering. */
-#define SK_MC_FILTERING_INEXACT		1	/* Inexact filtering. */
-
-/* ----- Additional SkAddrMcAdd return values ----- */
-
-#define SK_MC_ILLEGAL_ADDRESS		2	/* Illegal address. */
-#define SK_MC_ILLEGAL_PORT			3	/* Illegal port (not the active one). */
-#define SK_MC_RLMT_OVERFLOW			4	/* Too many RLMT mc addresses. */
-
-/* Promiscuous mode bits ----- */
-
-#define SK_PROM_MODE_NONE			0	/* Normal receive. */
-#define SK_PROM_MODE_LLC			1	/* Receive all LLC frames. */
-#define SK_PROM_MODE_ALL_MC			2	/* Receive all multicast frames. */
-/* #define SK_PROM_MODE_NON_LLC		4 */	/* Receive all non-LLC frames. */
-
-/* Macros */
-
-#ifdef OLD_STUFF
-#ifndef SK_ADDR_EQUAL
-/*
- * "&" instead of "&&" allows better optimization on IA-64.
- * The replacement is safe here, as all bytes exist.
- */
-#ifndef SK_ADDR_DWORD_COMPARE
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
-	(((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
-	(((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
-	(((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
-	(((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
-	(((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
-#else	/* SK_ADDR_DWORD_COMPARE */
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \
-	(*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
-#endif	/* SK_ADDR_DWORD_COMPARE */
-#endif	/* SK_ADDR_EQUAL */
-#endif /* 0 */
-
-#ifndef SK_ADDR_EQUAL
-#ifndef SK_ADDR_DWORD_COMPARE
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \
-	(((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \
-	(((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \
-	(((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \
-	(((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \
-	(((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0]))
-#else	/* SK_ADDR_DWORD_COMPARE */
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \
-	*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \
-	(*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \
-	*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0])))
-#endif	/* SK_ADDR_DWORD_COMPARE */
-#endif	/* SK_ADDR_EQUAL */
-
-/* typedefs *******************************************************************/
-
-typedef struct s_MacAddr {
-	SK_U8	a[SK_MAC_ADDR_LEN];
-} SK_MAC_ADDR;
-
-
-/* SK_FILTER is used to ensure alignment of the filter. */
-typedef union s_InexactFilter {
-	SK_U8	Bytes[8];
-	SK_U64	Val;	/* Dummy entry for alignment only. */
-} SK_FILTER64;
-
-
-typedef struct s_AddrNet SK_ADDR_NET;
-
-
-typedef struct s_AddrPort {
-
-/* ----- Public part (read-only) ----- */
-
-	SK_MAC_ADDR	CurrentMacAddress;	/* Current physical MAC Address. */
-	SK_MAC_ADDR	PermanentMacAddress;	/* Permanent physical MAC Address. */
-	int		PromMode;		/* Promiscuous Mode. */
-
-/* ----- Private part ----- */
-
-	SK_MAC_ADDR	PreviousMacAddress;	/* Prev. phys. MAC Address. */
-	SK_BOOL		CurrentMacAddressSet;	/* CurrentMacAddress is set. */
-	SK_U8		Align01;
-
-	SK_U32		FirstExactMatchRlmt;
-	SK_U32		NextExactMatchRlmt;
-	SK_U32		FirstExactMatchDrv;
-	SK_U32		NextExactMatchDrv;
-	SK_MAC_ADDR	Exact[SK_ADDR_EXACT_MATCHES];
-	SK_FILTER64	InexactFilter;			/* For 64-bit hash register. */
-	SK_FILTER64	InexactRlmtFilter;		/* For 64-bit hash register. */
-	SK_FILTER64	InexactDrvFilter;		/* For 64-bit hash register. */
-} SK_ADDR_PORT;
-
-
-struct s_AddrNet {
-/* ----- Public part (read-only) ----- */
-
-	SK_MAC_ADDR		CurrentMacAddress;	/* Logical MAC Address. */
-	SK_MAC_ADDR		PermanentMacAddress;	/* Logical MAC Address. */
-
-/* ----- Private part ----- */
-
-	SK_U32			ActivePort;		/* View of module ADDR. */
-	SK_BOOL			CurrentMacAddressSet;	/* CurrentMacAddress is set. */
-	SK_U8			Align01;
-	SK_U16			Align02;
-};
-
-
-typedef struct s_Addr {
-
-/* ----- Public part (read-only) ----- */
-
-	SK_ADDR_NET		Net[SK_MAX_NETS];
-	SK_ADDR_PORT	Port[SK_MAX_MACS];
-
-/* ----- Private part ----- */
-} SK_ADDR;
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_KR_PROTO
-
-/* Functions provided by SkAddr */
-
-/* ANSI/C++ compliant function prototypes */
-
-extern	int	SkAddrInit(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int	Level);
-
-extern	int	SkAddrMcClear(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	PortNumber,
-	int	Flags);
-
-extern	int	SkAddrMcAdd(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	SK_U32		PortNumber,
-	SK_MAC_ADDR	*pMc,
-	int		Flags);
-
-extern	int	SkAddrMcUpdate(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	PortNumber);
-
-extern	int	SkAddrOverride(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	SK_U32		PortNumber,
-	SK_MAC_ADDR	SK_FAR *pNewAddr,
-	int		Flags);
-
-extern	int	SkAddrPromiscuousChange(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	PortNumber,
-	int	NewPromMode);
-
-#ifndef SK_SLIM
-extern	int	SkAddrSwap(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	FromPortNumber,
-	SK_U32	ToPortNumber);
-#endif
-
-#else	/* defined(SK_KR_PROTO)) */
-
-/* Non-ANSI/C++ compliant function prototypes */
-
-#error KR-style prototypes are not yet provided.
-
-#endif	/* defined(SK_KR_PROTO)) */
-
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_SKADDR_H */
diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h
deleted file mode 100644
index 6e256bd9a28c..000000000000
--- a/drivers/net/sk98lin/h/skcsum.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/******************************************************************************
- *
- * Name:	skcsum.h
- * Project:	GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx)
- * Version:	$Revision: 1.10 $
- * Date:	$Date: 2003/08/20 13:59:57 $
- * Purpose:	Store/verify Internet checksum in send/receive packets.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2001 SysKonnect GmbH.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * Public header file for the "GEnesis" common module "CSUM".
- *
- * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
- * and is the code name of this SysKonnect project.
- *
- * Compilation Options:
- *
- *	SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
- *	empty module.
- *
- *	SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
- *	definitions. In this case, all SKCS_PROTO_xxx definitions must be made
- *	external.
- *
- *	SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
- *	definitions. In this case, all SKCS_STATUS_xxx definitions must be made
- *	external.
- *
- * Include File Hierarchy:
- *
- *	"h/skcsum.h"
- *	 "h/sktypes.h"
- *	 "h/skqueue.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKCSUM_H
-#define __INC_SKCSUM_H
-
-#include "h/sktypes.h"
-#include "h/skqueue.h"
-
-/* defines ********************************************************************/
-
-/*
- * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags'  if no user
- * overwrite.
- */
-#ifndef SKCS_OVERWRITE_PROTO	/* User overwrite? */
-#define SKCS_PROTO_IP	0x1	/* IP (Internet Protocol version 4) */
-#define SKCS_PROTO_TCP	0x2	/* TCP (Transmission Control Protocol) */
-#define SKCS_PROTO_UDP	0x4	/* UDP (User Datagram Protocol) */
-
-/* Indices for protocol statistics. */
-#define SKCS_PROTO_STATS_IP	0
-#define SKCS_PROTO_STATS_UDP	1
-#define SKCS_PROTO_STATS_TCP	2
-#define SKCS_NUM_PROTOCOLS	3	/* Number of supported protocols. */
-#endif	/* !SKCS_OVERWRITE_PROTO */
-
-/*
- * Define the default SKCS_STATUS type and values if no user overwrite.
- *
- *	SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
- *	SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
- *	SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
- *	SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
- *	SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
- *	SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
- *	SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
- *	SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
- *	SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
- *	SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
- *	SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. 
- */
-#ifndef SKCS_OVERWRITE_STATUS	/* User overwrite? */
-#define SKCS_STATUS	int	/* Define status type. */
-
-#define SKCS_STATUS_UNKNOWN_IP_VERSION	1
-#define SKCS_STATUS_IP_CSUM_ERROR		2
-#define SKCS_STATUS_IP_FRAGMENT			3
-#define SKCS_STATUS_IP_CSUM_OK			4
-#define SKCS_STATUS_TCP_CSUM_ERROR		5
-#define SKCS_STATUS_UDP_CSUM_ERROR		6
-#define SKCS_STATUS_TCP_CSUM_OK			7
-#define SKCS_STATUS_UDP_CSUM_OK			8
-/* needed for Microsoft */
-#define SKCS_STATUS_IP_CSUM_ERROR_UDP	9
-#define SKCS_STATUS_IP_CSUM_ERROR_TCP	10
-/* UDP checksum may be omitted */
-#define SKCS_STATUS_IP_CSUM_OK_NO_UDP	11
-#endif	/* !SKCS_OVERWRITE_STATUS */
-
-/* Clear protocol statistics event. */
-#define SK_CSUM_EVENT_CLEAR_PROTO_STATS	1
-
-/*
- * Add two values in one's complement.
- *
- * Note: One of the two input values may be "longer" than 16-bit, but then the
- * resulting sum may be 17 bits long. In this case, add zero to the result using
- * SKCS_OC_ADD() again.
- *
- *	Result = Value1 + Value2
- */
-#define SKCS_OC_ADD(Result, Value1, Value2) {				\
-	unsigned long Sum;						\
-									\
-	Sum = (unsigned long) (Value1) + (unsigned long) (Value2);	\
-	/* Add-in any carry. */						\
-	(Result) = (Sum & 0xffff) + (Sum >> 16);			\
-}
-
-/*
- * Subtract two values in one's complement.
- *
- *	Result = Value1 - Value2
- */
-#define SKCS_OC_SUB(Result, Value1, Value2)	\
-	SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff)
-
-/* typedefs *******************************************************************/
-
-/*
- * SKCS_PROTO_STATS - The CSUM protocol statistics structure.
- *
- * There is one instance of this structure for each protocol supported.
- */
-typedef struct s_CsProtocolStatistics {
-	SK_U64 RxOkCts;		/* Receive checksum ok. */
-	SK_U64 RxUnableCts;	/* Unable to verify receive checksum. */
-	SK_U64 RxErrCts;	/* Receive checksum error. */
-	SK_U64 TxOkCts;		/* Transmit checksum ok. */
-	SK_U64 TxUnableCts;	/* Unable to calculate checksum in hw. */
-} SKCS_PROTO_STATS;
-
-/*
- * s_Csum - The CSUM module context structure.
- */
-typedef struct s_Csum {
-	/* Enabled receive SK_PROTO_XXX bit flags. */
-	unsigned ReceiveFlags[SK_MAX_NETS];
-#ifdef TX_CSUM
-	unsigned TransmitFlags[SK_MAX_NETS];
-#endif /* TX_CSUM */
-
-	/* The protocol statistics structure; one per supported protocol. */
-	SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS];
-} SK_CSUM;
-
-/*
- * SKCS_PACKET_INFO - The packet information structure.
- */
-typedef struct s_CsPacketInfo {
-	/* Bit field specifiying the desired/found protocols. */
-	unsigned ProtocolFlags;
-
-	/* Length of complete IP header, including any option fields. */
-	unsigned IpHeaderLength;
-
-	/* IP header checksum. */
-	unsigned IpHeaderChecksum;
-
-	/* TCP/UDP pseudo header checksum. */
-	unsigned PseudoHeaderChecksum;
-} SKCS_PACKET_INFO;
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_CS_CALCULATE_CHECKSUM
-extern unsigned SkCsCalculateChecksum(
-	void		*pData,
-	unsigned	Length);
-#endif /* SK_CS_CALCULATE_CHECKSUM */
-
-extern int SkCsEvent(
-	SK_AC		*pAc,
-	SK_IOC		Ioc,
-	SK_U32		Event,
-	SK_EVPARA	Param);
-
-extern SKCS_STATUS SkCsGetReceiveInfo(
-	SK_AC		*pAc,
-	void		*pIpHeader,
-	unsigned	Checksum1,
-	unsigned	Checksum2,
-	int			NetNumber);
-
-extern void SkCsSetReceiveFlags(
-	SK_AC		*pAc,
-	unsigned	ReceiveFlags,
-	unsigned	*pChecksum1Offset,
-	unsigned	*pChecksum2Offset,
-	int			NetNumber);
-
-#endif	/* __INC_SKCSUM_H */
diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h
deleted file mode 100644
index 3cba171d74b2..000000000000
--- a/drivers/net/sk98lin/h/skdebug.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/******************************************************************************
- *
- * Name:	skdebug.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.14 $
- * Date:	$Date: 2003/05/13 17:26:00 $
- * Purpose:	SK specific DEBUG support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDEBUG_H
-#define __INC_SKDEBUG_H
-
-#ifdef	DEBUG
-#ifndef SK_DBG_MSG
-#define SK_DBG_MSG(pAC,comp,cat,arg) \
-		if ( ((comp) & SK_DBG_CHKMOD(pAC)) && 	\
-		      ((cat) & SK_DBG_CHKCAT(pAC)) ) { 	\
-			SK_DBG_PRINTF arg ;		\
-		}
-#endif
-#else
-#define SK_DBG_MSG(pAC,comp,lev,arg)
-#endif
-
-/* PLS NOTE:
- * =========
- * Due to any restrictions of kernel printf routines do not use other
- * format identifiers as: %x %d %c %s .
- * Never use any combined format identifiers such as: %lx %ld in your
- * printf - argument (arg) because some OS specific kernel printfs may
- * only support some basic identifiers.
- */
-
-/* Debug modules */
-
-#define SK_DBGMOD_MERR	0x00000001L	/* general module error indication */
-#define SK_DBGMOD_HWM	0x00000002L	/* Hardware init module */
-#define SK_DBGMOD_RLMT	0x00000004L	/* RLMT module */
-#define SK_DBGMOD_VPD	0x00000008L	/* VPD module */
-#define SK_DBGMOD_I2C	0x00000010L	/* I2C module */
-#define SK_DBGMOD_PNMI	0x00000020L	/* PNMI module */
-#define SK_DBGMOD_CSUM	0x00000040L	/* CSUM module */
-#define SK_DBGMOD_ADDR	0x00000080L	/* ADDR module */
-#define SK_DBGMOD_PECP	0x00000100L	/* PECP module */
-#define SK_DBGMOD_POWM	0x00000200L	/* Power Management module */
-
-/* Debug events */
-
-#define SK_DBGCAT_INIT	0x00000001L	/* module/driver initialization */
-#define SK_DBGCAT_CTRL	0x00000002L	/* controlling devices */
-#define SK_DBGCAT_ERR	0x00000004L	/* error handling paths */
-#define SK_DBGCAT_TX	0x00000008L	/* transmit path */
-#define SK_DBGCAT_RX	0x00000010L	/* receive path */
-#define SK_DBGCAT_IRQ	0x00000020L	/* general IRQ handling */
-#define SK_DBGCAT_QUEUE	0x00000040L	/* any queue management */
-#define SK_DBGCAT_DUMP	0x00000080L	/* large data output e.g. hex dump */
-#define SK_DBGCAT_FATAL	0x00000100L	/* fatal error */
-
-#endif	/* __INC_SKDEBUG_H */
diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h
deleted file mode 100644
index 91b8d4f45904..000000000000
--- a/drivers/net/sk98lin/h/skdrv1st.h
+++ /dev/null
@@ -1,188 +0,0 @@
-/******************************************************************************
- *
- * Name:	skdrv1st.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.4 $
- * Date:	$Date: 2003/11/12 14:28:14 $
- * Purpose:	First header file for driver and all other modules
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the first include file of the driver, which includes all
- * neccessary system header files and some of the GEnesis header files.
- * It also defines some basic items.
- *
- * Include File Hierarchy:
- *
- *	see skge.c
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDRV1ST_H
-#define __INC_SKDRV1ST_H
-
-typedef struct s_AC	SK_AC;
-
-/* Set card versions */
-#define SK_FAR
-
-/* override some default functions with optimized linux functions */
-
-#define SK_PNMI_STORE_U16(p,v)		memcpy((char*)(p),(char*)&(v),2)
-#define SK_PNMI_STORE_U32(p,v)		memcpy((char*)(p),(char*)&(v),4)
-#define SK_PNMI_STORE_U64(p,v)		memcpy((char*)(p),(char*)&(v),8)
-#define SK_PNMI_READ_U16(p,v)		memcpy((char*)&(v),(char*)(p),2)
-#define SK_PNMI_READ_U32(p,v)		memcpy((char*)&(v),(char*)(p),4)
-#define SK_PNMI_READ_U64(p,v)		memcpy((char*)&(v),(char*)(p),8)
-
-#define SK_ADDR_EQUAL(a1,a2)		(!memcmp(a1,a2,6))
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/bitops.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <net/checksum.h>
-
-#define SK_CS_CALCULATE_CHECKSUM
-#ifndef CONFIG_X86_64
-#define SkCsCalculateChecksum(p,l)	((~ip_compute_csum(p, l)) & 0xffff)
-#else
-#define SkCsCalculateChecksum(p,l)	((~ip_fast_csum(p, l)) & 0xffff)
-#endif
-
-#include	"h/sktypes.h"
-#include	"h/skerror.h"
-#include	"h/skdebug.h"
-#include	"h/lm80.h"
-#include	"h/xmac_ii.h"
-
-#ifdef __LITTLE_ENDIAN
-#define SK_LITTLE_ENDIAN
-#else
-#define SK_BIG_ENDIAN
-#endif
-
-#define SK_NET_DEVICE	net_device
-
-
-/* we use gethrtime(), return unit: nanoseconds */
-#define SK_TICKS_PER_SEC	100
-
-#define	SK_MEM_MAPPED_IO
-
-// #define SK_RLMT_SLOW_LOOKAHEAD
-
-#define SK_MAX_MACS		2
-#define SK_MAX_NETS		2
-
-#define SK_IOC			char __iomem *
-
-typedef struct s_DrvRlmtMbuf SK_MBUF;
-
-#define	SK_CONST64	INT64_C
-#define	SK_CONSTU64	UINT64_C
-
-#define SK_MEMCPY(dest,src,size)	memcpy(dest,src,size)
-#define SK_MEMCMP(s1,s2,size)		memcmp(s1,s2,size)
-#define SK_MEMSET(dest,val,size)	memset(dest,val,size)
-#define SK_STRLEN(pStr)			strlen((char*)(pStr))
-#define SK_STRNCPY(pDest,pSrc,size)	strncpy((char*)(pDest),(char*)(pSrc),size)
-#define SK_STRCMP(pStr1,pStr2)		strcmp((char*)(pStr1),(char*)(pStr2))
-
-/* macros to access the adapter */
-#define SK_OUT8(b,a,v)		writeb((v), ((b)+(a)))	
-#define SK_OUT16(b,a,v)		writew((v), ((b)+(a)))	
-#define SK_OUT32(b,a,v)		writel((v), ((b)+(a)))	
-#define SK_IN8(b,a,pv)		(*(pv) = readb((b)+(a)))
-#define SK_IN16(b,a,pv)		(*(pv) = readw((b)+(a)))
-#define SK_IN32(b,a,pv)		(*(pv) = readl((b)+(a)))
-
-#define int8_t		char
-#define int16_t		short
-#define int32_t		long
-#define int64_t		long long
-#define uint8_t		u_char
-#define uint16_t	u_short
-#define uint32_t	u_long
-#define uint64_t	unsigned long long
-#define t_scalar_t	int
-#define t_uscalar_t	unsigned int
-#define uintptr_t	unsigned long
-
-#define __CONCAT__(A,B) A##B
-
-#define INT32_C(a)		__CONCAT__(a,L)
-#define INT64_C(a)		__CONCAT__(a,LL)
-#define UINT32_C(a)		__CONCAT__(a,UL)
-#define UINT64_C(a)		__CONCAT__(a,ULL)
-
-#ifdef DEBUG
-#define SK_DBG_PRINTF		printk
-#ifndef SK_DEBUG_CHKMOD
-#define SK_DEBUG_CHKMOD		0
-#endif
-#ifndef SK_DEBUG_CHKCAT
-#define SK_DEBUG_CHKCAT		0
-#endif
-/* those come from the makefile */
-#define SK_DBG_CHKMOD(pAC)	(SK_DEBUG_CHKMOD)
-#define SK_DBG_CHKCAT(pAC)	(SK_DEBUG_CHKCAT)
-
-extern void SkDbgPrintf(const char *format,...);
-
-#define SK_DBGMOD_DRV			0x00010000
-
-/**** possible driver debug categories ********************************/
-#define SK_DBGCAT_DRV_ENTRY		0x00010000
-#define SK_DBGCAT_DRV_SAP		0x00020000
-#define SK_DBGCAT_DRV_MCA		0x00040000
-#define SK_DBGCAT_DRV_TX_PROGRESS	0x00080000
-#define SK_DBGCAT_DRV_RX_PROGRESS	0x00100000
-#define SK_DBGCAT_DRV_PROGRESS		0x00200000
-#define SK_DBGCAT_DRV_MSG		0x00400000
-#define SK_DBGCAT_DRV_PROM		0x00800000
-#define SK_DBGCAT_DRV_TX_FRAME		0x01000000
-#define SK_DBGCAT_DRV_ERROR		0x02000000
-#define SK_DBGCAT_DRV_INT_SRC		0x04000000
-#define SK_DBGCAT_DRV_EVENT		0x08000000
-
-#endif
-
-#define SK_ERR_LOG		SkErrorLog
-
-extern void SkErrorLog(SK_AC*, int, int, char*);
-
-#endif
-
diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h
deleted file mode 100644
index 3fa67171e832..000000000000
--- a/drivers/net/sk98lin/h/skdrv2nd.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/******************************************************************************
- *
- * Name:	skdrv2nd.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.10 $
- * Date:	$Date: 2003/12/11 16:04:45 $
- * Purpose:	Second header file for driver and all other modules
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the second include file of the driver, which includes all other
- * neccessary files and defines all structures and constants used by the
- * driver and the common modules.
- *
- * Include File Hierarchy:
- *
- *	see skge.c
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDRV2ND_H
-#define __INC_SKDRV2ND_H
-
-#include "h/skqueue.h"
-#include "h/skgehwt.h"
-#include "h/sktimer.h"
-#include "h/ski2c.h"
-#include "h/skgepnmi.h"
-#include "h/skvpd.h"
-#include "h/skgehw.h"
-#include "h/skgeinit.h"
-#include "h/skaddr.h"
-#include "h/skgesirq.h"
-#include "h/skcsum.h"
-#include "h/skrlmt.h"
-#include "h/skgedrv.h"
-
-
-extern SK_MBUF		*SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned);
-extern void		SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*);
-extern SK_U64		SkOsGetTime(SK_AC*);
-extern int		SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
-extern int		SkPciReadCfgWord(SK_AC*, int, SK_U16*);
-extern int		SkPciReadCfgByte(SK_AC*, int, SK_U8*);
-extern int		SkPciWriteCfgWord(SK_AC*, int, SK_U16);
-extern int		SkPciWriteCfgByte(SK_AC*, int, SK_U8);
-extern int		SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
-
-#ifdef SK_DIAG_SUPPORT
-extern int		SkDrvEnterDiagMode(SK_AC *pAc);
-extern int		SkDrvLeaveDiagMode(SK_AC *pAc);
-#endif
-
-struct s_DrvRlmtMbuf {
-	SK_MBUF		*pNext;		/* Pointer to next RLMT Mbuf. */
-	SK_U8		*pData;		/* Data buffer (virtually contig.). */
-	unsigned	Size;		/* Data buffer size. */
-	unsigned	Length;		/* Length of packet (<= Size). */
-	SK_U32		PortIdx;	/* Receiving/transmitting port. */
-#ifdef SK_RLMT_MBUF_PRIVATE
-	SK_RLMT_MBUF	Rlmt;		/* Private part for RLMT. */
-#endif  /* SK_RLMT_MBUF_PRIVATE */
-	struct sk_buff	*pOs;		/* Pointer to message block */
-};
-
-
-/*
- * Time macros
- */
-#if SK_TICKS_PER_SEC == 100
-#define SK_PNMI_HUNDREDS_SEC(t)	(t)
-#else
-#define SK_PNMI_HUNDREDS_SEC(t)	((((unsigned long)t) * 100) / \
-										(SK_TICKS_PER_SEC))
-#endif
-
-/*
- * New SkOsGetTime
- */
-#define SkOsGetTimeCurrent(pAC, pUsec) {\
-	struct timeval t;\
-	do_gettimeofday(&t);\
-	*pUsec = ((((t.tv_sec) * 1000000L)+t.tv_usec)/10000);\
-}
-
-
-/*
- * ioctl definitions
- */
-#define		SK_IOCTL_BASE		(SIOCDEVPRIVATE)
-#define		SK_IOCTL_GETMIB		(SK_IOCTL_BASE + 0)
-#define		SK_IOCTL_SETMIB		(SK_IOCTL_BASE + 1)
-#define		SK_IOCTL_PRESETMIB	(SK_IOCTL_BASE + 2)
-#define		SK_IOCTL_GEN		(SK_IOCTL_BASE + 3)
-#define		SK_IOCTL_DIAG		(SK_IOCTL_BASE + 4)
-
-typedef struct s_IOCTL	SK_GE_IOCTL;
-
-struct s_IOCTL {
-	char __user *	pData;
-	unsigned int	Len;
-};
-
-
-/*
- * define sizes of descriptor rings in bytes
- */
-
-#define		TX_RING_SIZE	(8*1024)
-#define		RX_RING_SIZE	(24*1024)
-
-/*
- * Buffer size for ethernet packets
- */
-#define	ETH_BUF_SIZE	1540
-#define	ETH_MAX_MTU	1514
-#define ETH_MIN_MTU	60
-#define ETH_MULTICAST_BIT	0x01
-#define SK_JUMBO_MTU	9000
-
-/*
- * transmit priority selects the queue: LOW=asynchron, HIGH=synchron
- */
-#define TX_PRIO_LOW	0
-#define TX_PRIO_HIGH	1
-
-/*
- * alignment of rx/tx descriptors
- */
-#define DESCR_ALIGN	64
-
-/*
- * definitions for pnmi. TODO
- */
-#define SK_DRIVER_RESET(pAC, IoC)	0
-#define SK_DRIVER_SENDEVENT(pAC, IoC)	0
-#define SK_DRIVER_SELFTEST(pAC, IoC)	0
-/* For get mtu you must add an own function */
-#define SK_DRIVER_GET_MTU(pAc,IoC,i)	0
-#define SK_DRIVER_SET_MTU(pAc,IoC,i,v)	0
-#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v)	0
-
-/*
-** Interim definition of SK_DRV_TIMER placed in this file until 
-** common modules have been finalized
-*/
-#define SK_DRV_TIMER			11 
-#define	SK_DRV_MODERATION_TIMER		1
-#define SK_DRV_MODERATION_TIMER_LENGTH  1000000  /* 1 second */
-#define SK_DRV_RX_CLEANUP_TIMER		2
-#define SK_DRV_RX_CLEANUP_TIMER_LENGTH	1000000	 /* 100 millisecs */
-
-/*
-** Definitions regarding transmitting frames 
-** any calculating any checksum.
-*/
-#define C_LEN_ETHERMAC_HEADER_DEST_ADDR 6
-#define C_LEN_ETHERMAC_HEADER_SRC_ADDR  6
-#define C_LEN_ETHERMAC_HEADER_LENTYPE   2
-#define C_LEN_ETHERMAC_HEADER           ( (C_LEN_ETHERMAC_HEADER_DEST_ADDR) + \
-                                          (C_LEN_ETHERMAC_HEADER_SRC_ADDR)  + \
-                                          (C_LEN_ETHERMAC_HEADER_LENTYPE) )
-
-#define C_LEN_ETHERMTU_MINSIZE          46
-#define C_LEN_ETHERMTU_MAXSIZE_STD      1500
-#define C_LEN_ETHERMTU_MAXSIZE_JUMBO    9000
-
-#define C_LEN_ETHERNET_MINSIZE          ( (C_LEN_ETHERMAC_HEADER) + \
-                                          (C_LEN_ETHERMTU_MINSIZE) )
-
-#define C_OFFSET_IPHEADER               C_LEN_ETHERMAC_HEADER
-#define C_OFFSET_IPHEADER_IPPROTO       9
-#define C_OFFSET_TCPHEADER_TCPCS        16
-#define C_OFFSET_UDPHEADER_UDPCS        6
-
-#define C_OFFSET_IPPROTO                ( (C_LEN_ETHERMAC_HEADER) + \
-                                          (C_OFFSET_IPHEADER_IPPROTO) )
-
-#define C_PROTO_ID_UDP                  17       /* refer to RFC 790 or Stevens'   */
-#define C_PROTO_ID_TCP                  6        /* TCP/IP illustrated for details */
-
-/* TX and RX descriptors *****************************************************/
-
-typedef struct s_RxD RXD; /* the receive descriptor */
-
-struct s_RxD {
-	volatile SK_U32	RBControl;	/* Receive Buffer Control */
-	SK_U32		VNextRxd;	/* Next receive descriptor,low dword */
-	SK_U32		VDataLow;	/* Receive buffer Addr, low dword */
-	SK_U32		VDataHigh;	/* Receive buffer Addr, high dword */
-	SK_U32		FrameStat;	/* Receive Frame Status word */
-	SK_U32		TimeStamp;	/* Time stamp from XMAC */
-	SK_U32		TcpSums;	/* TCP Sum 2 / TCP Sum 1 */
-	SK_U32		TcpSumStarts;	/* TCP Sum Start 2 / TCP Sum Start 1 */
-	RXD		*pNextRxd;	/* Pointer to next Rxd */
-	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
-};
-
-typedef struct s_TxD TXD; /* the transmit descriptor */
-
-struct s_TxD {
-	volatile SK_U32	TBControl;	/* Transmit Buffer Control */
-	SK_U32		VNextTxd;	/* Next transmit descriptor,low dword */
-	SK_U32		VDataLow;	/* Transmit Buffer Addr, low dword */
-	SK_U32		VDataHigh;	/* Transmit Buffer Addr, high dword */
-	SK_U32		FrameStat;	/* Transmit Frame Status Word */
-	SK_U32		TcpSumOfs;	/* Reserved / TCP Sum Offset */
-	SK_U16		TcpSumSt;	/* TCP Sum Start */
-	SK_U16		TcpSumWr;	/* TCP Sum Write */
-	SK_U32		TcpReserved;	/* not used */
-	TXD		*pNextTxd;	/* Pointer to next Txd */
-	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
-};
-
-/* Used interrupt bits in the interrupts source register *********************/
-
-#define DRIVER_IRQS	((IS_IRQ_SW)   | \
-			(IS_R1_F)      |(IS_R2_F)  | \
-			(IS_XS1_F)     |(IS_XA1_F) | \
-			(IS_XS2_F)     |(IS_XA2_F))
-
-#define SPECIAL_IRQS	((IS_HW_ERR)   |(IS_I2C_READY)  | \
-			(IS_EXT_REG)   |(IS_TIMINT)     | \
-			(IS_PA_TO_RX1) |(IS_PA_TO_RX2)  | \
-			(IS_PA_TO_TX1) |(IS_PA_TO_TX2)  | \
-			(IS_MAC1)      |(IS_LNK_SYNC_M1)| \
-			(IS_MAC2)      |(IS_LNK_SYNC_M2)| \
-			(IS_R1_C)      |(IS_R2_C)       | \
-			(IS_XS1_C)     |(IS_XA1_C)      | \
-			(IS_XS2_C)     |(IS_XA2_C))
-
-#define IRQ_MASK	((IS_IRQ_SW)   | \
-			(IS_R1_B)      |(IS_R1_F)     |(IS_R2_B) |(IS_R2_F) | \
-			(IS_XS1_B)     |(IS_XS1_F)    |(IS_XA1_B)|(IS_XA1_F)| \
-			(IS_XS2_B)     |(IS_XS2_F)    |(IS_XA2_B)|(IS_XA2_F)| \
-			(IS_HW_ERR)    |(IS_I2C_READY)| \
-			(IS_EXT_REG)   |(IS_TIMINT)   | \
-			(IS_PA_TO_RX1) |(IS_PA_TO_RX2)| \
-			(IS_PA_TO_TX1) |(IS_PA_TO_TX2)| \
-			(IS_MAC1)      |(IS_MAC2)     | \
-			(IS_R1_C)      |(IS_R2_C)     | \
-			(IS_XS1_C)     |(IS_XA1_C)    | \
-			(IS_XS2_C)     |(IS_XA2_C))
-
-#define IRQ_HWE_MASK	(IS_ERR_MSK) /* enable all HW irqs */
-
-typedef struct s_DevNet DEV_NET;
-
-struct s_DevNet {
-	int             PortNr;
-	int             NetNr;
-	SK_AC   *pAC;
-};  
-
-typedef struct s_TxPort		TX_PORT;
-
-struct s_TxPort {
-	/* the transmit descriptor rings */
-	caddr_t		pTxDescrRing;	/* descriptor area memory */
-	SK_U64		VTxDescrRing;	/* descr. area bus virt. addr. */
-	TXD		*pTxdRingHead;	/* Head of Tx rings */
-	TXD		*pTxdRingTail;	/* Tail of Tx rings */
-	TXD		*pTxdRingPrev;	/* descriptor sent previously */
-	int		TxdRingFree;	/* # of free entrys */
-	spinlock_t	TxDesRingLock;	/* serialize descriptor accesses */
-	SK_IOC		HwAddr;		/* bmu registers address */
-	int		PortIndex;	/* index number of port (0 or 1) */
-};
-
-typedef struct s_RxPort		RX_PORT;
-
-struct s_RxPort {
-	/* the receive descriptor rings */
-	caddr_t		pRxDescrRing;	/* descriptor area memory */
-	SK_U64		VRxDescrRing;   /* descr. area bus virt. addr. */
-	RXD		*pRxdRingHead;	/* Head of Rx rings */
-	RXD		*pRxdRingTail;	/* Tail of Rx rings */
-	RXD		*pRxdRingPrev;	/* descriptor given to BMU previously */
-	int		RxdRingFree;	/* # of free entrys */
-	int		RxCsum;		/* use receive checksum hardware */
-	spinlock_t	RxDesRingLock;	/* serialize descriptor accesses */
-	int		RxFillLimit;	/* limit for buffers in ring */
-	SK_IOC		HwAddr;		/* bmu registers address */
-	int		PortIndex;	/* index number of port (0 or 1) */
-};
-
-/* Definitions needed for interrupt moderation *******************************/
-
-#define IRQ_EOF_AS_TX     ((IS_XA1_F)     | (IS_XA2_F))
-#define IRQ_EOF_SY_TX     ((IS_XS1_F)     | (IS_XS2_F))
-#define IRQ_MASK_TX_ONLY  ((IRQ_EOF_AS_TX)| (IRQ_EOF_SY_TX))
-#define IRQ_MASK_RX_ONLY  ((IS_R1_F)      | (IS_R2_F))
-#define IRQ_MASK_SP_ONLY  (SPECIAL_IRQS)
-#define IRQ_MASK_TX_RX    ((IRQ_MASK_TX_ONLY)| (IRQ_MASK_RX_ONLY))
-#define IRQ_MASK_SP_RX    ((SPECIAL_IRQS)    | (IRQ_MASK_RX_ONLY))
-#define IRQ_MASK_SP_TX    ((SPECIAL_IRQS)    | (IRQ_MASK_TX_ONLY))
-#define IRQ_MASK_RX_TX_SP ((SPECIAL_IRQS)    | (IRQ_MASK_TX_RX))
-
-#define C_INT_MOD_NONE                 1
-#define C_INT_MOD_STATIC               2
-#define C_INT_MOD_DYNAMIC              4
-
-#define C_CLK_FREQ_GENESIS      53215000 /* shorter: 53.125 MHz  */
-#define C_CLK_FREQ_YUKON        78215000 /* shorter: 78.125 MHz  */
-
-#define C_INTS_PER_SEC_DEFAULT      2000 
-#define C_INT_MOD_ENABLE_PERCENTAGE   50 /* if higher 50% enable */
-#define C_INT_MOD_DISABLE_PERCENTAGE  50 /* if lower 50% disable */
-#define C_INT_MOD_IPS_LOWER_RANGE     30
-#define C_INT_MOD_IPS_UPPER_RANGE     40000
-
-
-typedef struct s_DynIrqModInfo  DIM_INFO;
-struct s_DynIrqModInfo {
-	unsigned long   PrevTimeVal;
-	unsigned int    PrevSysLoad;
-	unsigned int    PrevUsedTime;
-	unsigned int    PrevTotalTime;
-	int             PrevUsedDescrRatio;
-	int             NbrProcessedDescr;
-        SK_U64          PrevPort0RxIntrCts;
-        SK_U64          PrevPort1RxIntrCts;
-        SK_U64          PrevPort0TxIntrCts;
-        SK_U64          PrevPort1TxIntrCts;
-	SK_BOOL         ModJustEnabled;     /* Moderation just enabled yes/no */
-
-	int             MaxModIntsPerSec;            /* Moderation Threshold */
-	int             MaxModIntsPerSecUpperLimit;  /* Upper limit for DIM  */
-	int             MaxModIntsPerSecLowerLimit;  /* Lower limit for DIM  */
-
-	long            MaskIrqModeration;   /* ModIrqType (eg. 'TxRx')      */
-	SK_BOOL         DisplayStats;        /* Stats yes/no                 */
-	SK_BOOL         AutoSizing;          /* Resize DIM-timer on/off      */
-	int             IntModTypeSelect;    /* EnableIntMod (eg. 'dynamic') */
-
-	SK_TIMER        ModTimer; /* just some timer */
-};
-
-typedef struct s_PerStrm	PER_STRM;
-
-#define SK_ALLOC_IRQ	0x00000001
-
-#ifdef SK_DIAG_SUPPORT
-#define	DIAG_ACTIVE		1
-#define	DIAG_NOTACTIVE		0
-#endif
-
-/****************************************************************************
- * Per board structure / Adapter Context structure:
- *	Allocated within attach(9e) and freed within detach(9e).
- *	Contains all 'per device' necessary handles, flags, locks etc.:
- */
-struct s_AC  {
-	SK_GEINIT	GIni;		/* GE init struct */
-	SK_PNMI		Pnmi;		/* PNMI data struct */
-	SK_VPD		vpd;		/* vpd data struct */
-	SK_QUEUE	Event;		/* Event queue */
-	SK_HWT		Hwt;		/* Hardware Timer control struct */
-	SK_TIMCTRL	Tim;		/* Software Timer control struct */
-	SK_I2C		I2c;		/* I2C relevant data structure */
-	SK_ADDR		Addr;		/* for Address module */
-	SK_CSUM		Csum;		/* for checksum module */
-	SK_RLMT		Rlmt;		/* for rlmt module */
-	spinlock_t	SlowPathLock;	/* Normal IRQ lock */
-	struct timer_list BlinkTimer;	/* for LED blinking */
-	int		LedsOn;
-	SK_PNMI_STRUCT_DATA PnmiStruct;	/* structure to get all Pnmi-Data */
-	int			RlmtMode;	/* link check mode to set */
-	int			RlmtNets;	/* Number of nets */
-	
-	SK_IOC		IoBase;		/* register set of adapter */
-	int		BoardLevel;	/* level of active hw init (0-2) */
-
-	SK_U32		AllocFlag;	/* flag allocation of resources */
-	struct pci_dev	*PciDev;	/* for access to pci config space */
-	struct SK_NET_DEVICE	*dev[2];	/* pointer to device struct */
-
-	int		RxBufSize;	/* length of receive buffers */
-        struct net_device_stats stats;	/* linux 'netstat -i' statistics */
-	int		Index;		/* internal board index number */
-
-	/* adapter RAM sizes for queues of active port */
-	int		RxQueueSize;	/* memory used for receive queue */
-	int		TxSQueueSize;	/* memory used for sync. tx queue */
-	int		TxAQueueSize;	/* memory used for async. tx queue */
-
-	int		PromiscCount;	/* promiscuous mode counter  */
-	int		AllMultiCount;  /* allmulticast mode counter */
-	int		MulticCount;	/* number of different MC    */
-					/*  addresses for this board */
-					/*  (may be more than HW can)*/
-
-	int		HWRevision;	/* Hardware revision */
-	int		ActivePort;	/* the active XMAC port */
-	int		MaxPorts;		/* number of activated ports */
-	int		TxDescrPerRing;	/* # of descriptors per tx ring */
-	int		RxDescrPerRing;	/* # of descriptors per rx ring */
-
-	caddr_t		pDescrMem;	/* Pointer to the descriptor area */
-	dma_addr_t	pDescrMemDMA;	/* PCI DMA address of area */
-
-	/* the port structures with descriptor rings */
-	TX_PORT		TxPort[SK_MAX_MACS][2];
-	RX_PORT		RxPort[SK_MAX_MACS];
-
-	SK_BOOL		CheckQueue;	/* check event queue soon */
-	SK_TIMER        DrvCleanupTimer;/* to check for pending descriptors */
-	DIM_INFO        DynIrqModInfo;  /* all data related to DIM */
-
-	/* Only for tests */
-	int		PortDown;
-	int		ChipsetType;	/*  Chipset family type 
-					 *  0 == Genesis family support
-					 *  1 == Yukon family support
-					 */
-#ifdef SK_DIAG_SUPPORT
-	SK_U32		DiagModeActive;		/* is diag active?	*/
-	SK_BOOL		DiagFlowCtrl;		/* for control purposes	*/
-	SK_PNMI_STRUCT_DATA PnmiBackup;		/* backup structure for all Pnmi-Data */
-	SK_BOOL         WasIfUp[SK_MAX_MACS];   /* for OpenClose while 
-						 * DIAG is busy with NIC 
-						 */
-#endif
-
-};
-
-
-#endif /* __INC_SKDRV2ND_H */
-
diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h
deleted file mode 100644
index da062f766238..000000000000
--- a/drivers/net/sk98lin/h/skerror.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/******************************************************************************
- *
- * Name:	skerror.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.7 $
- * Date:	$Date: 2003/05/13 17:25:13 $
- * Purpose:	SK specific Error log support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _INC_SKERROR_H_
-#define _INC_SKERROR_H_
-
-/*
- * Define Error Classes
- */
-#define	SK_ERRCL_OTHER		(0)		/* Other error */
-#define	SK_ERRCL_CONFIG		(1L<<0)	/* Configuration error */
-#define	SK_ERRCL_INIT		(1L<<1)	/* Initialization error */
-#define	SK_ERRCL_NORES		(1L<<2)	/* Out of Resources error */
-#define	SK_ERRCL_SW			(1L<<3)	/* Internal Software error */
-#define	SK_ERRCL_HW			(1L<<4)	/* Hardware Failure */
-#define	SK_ERRCL_COMM		(1L<<5)	/* Communication error */
-
-
-/*
- * Define Error Code Bases
- */
-#define	SK_ERRBASE_RLMT		 100	/* Base Error number for RLMT */
-#define	SK_ERRBASE_HWINIT	 200	/* Base Error number for HWInit */
-#define	SK_ERRBASE_VPD		 300	/* Base Error number for VPD */
-#define	SK_ERRBASE_PNMI		 400	/* Base Error number for PNMI */
-#define	SK_ERRBASE_CSUM		 500	/* Base Error number for Checksum */
-#define	SK_ERRBASE_SIRQ		 600	/* Base Error number for Special IRQ */
-#define	SK_ERRBASE_I2C		 700	/* Base Error number for I2C module */
-#define	SK_ERRBASE_QUEUE	 800	/* Base Error number for Scheduler */
-#define	SK_ERRBASE_ADDR		 900	/* Base Error number for Address module */
-#define SK_ERRBASE_PECP		1000    /* Base Error number for PECP */
-#define	SK_ERRBASE_DRV		1100	/* Base Error number for Driver */
-
-#endif	/* _INC_SKERROR_H_ */
diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h
deleted file mode 100644
index 44fd4c3de818..000000000000
--- a/drivers/net/sk98lin/h/skgedrv.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgedrv.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.10 $
- * Date:	$Date: 2003/07/04 12:25:01 $
- * Purpose:	Interface with the driver
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEDRV_H_
-#define __INC_SKGEDRV_H_
-
-/* defines ********************************************************************/
-
-/*
- * Define the driver events.
- * Usually the events are defined by the destination module.
- * In case of the driver we put the definition of the events here.
- */
-#define SK_DRV_PORT_RESET		 1	/* The port needs to be reset */
-#define SK_DRV_NET_UP   		 2	/* The net is operational */
-#define SK_DRV_NET_DOWN			 3	/* The net is down */
-#define SK_DRV_SWITCH_SOFT		 4	/* Ports switch with both links connected */
-#define SK_DRV_SWITCH_HARD		 5	/* Port switch due to link failure */
-#define SK_DRV_RLMT_SEND		 6	/* Send a RLMT packet */
-#define SK_DRV_ADAP_FAIL		 7	/* The whole adapter fails */
-#define SK_DRV_PORT_FAIL		 8	/* One port fails */
-#define SK_DRV_SWITCH_INTERN	 9	/* Port switch by the driver itself */
-#define SK_DRV_POWER_DOWN		10	/* Power down mode */
-#define SK_DRV_TIMER			11	/* Timer for free use */
-#ifdef SK_NO_RLMT
-#define SK_DRV_LINK_UP  		12	/* Link Up event for driver */
-#define SK_DRV_LINK_DOWN		13	/* Link Down event for driver */
-#endif
-#define SK_DRV_DOWNSHIFT_DET	14	/* Downshift 4-Pair / 2-Pair (YUKON only) */
-#endif /* __INC_SKGEDRV_H_ */
diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h
deleted file mode 100644
index f6282b7956db..000000000000
--- a/drivers/net/sk98lin/h/skgehw.h
+++ /dev/null
@@ -1,2126 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgehw.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.56 $
- * Date:	$Date: 2003/09/23 09:01:00 $
- * Purpose:	Defines and Macros for the Gigabit Ethernet Adapter Product Family
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEHW_H
-#define __INC_SKGEHW_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* __cplusplus */
-
-/* defines ********************************************************************/
-
-#define BIT_31		(1UL << 31)
-#define BIT_30		(1L << 30)
-#define BIT_29		(1L << 29)
-#define BIT_28		(1L << 28)
-#define BIT_27		(1L << 27)
-#define BIT_26		(1L << 26)
-#define BIT_25		(1L << 25)
-#define BIT_24		(1L << 24)
-#define BIT_23		(1L << 23)
-#define BIT_22		(1L << 22)
-#define BIT_21		(1L << 21)
-#define BIT_20		(1L << 20)
-#define BIT_19		(1L << 19)
-#define BIT_18		(1L << 18)
-#define BIT_17		(1L << 17)
-#define BIT_16		(1L << 16)
-#define BIT_15		(1L << 15)
-#define BIT_14		(1L << 14)
-#define BIT_13		(1L << 13)
-#define BIT_12		(1L << 12)
-#define BIT_11		(1L << 11)
-#define BIT_10		(1L << 10)
-#define BIT_9		(1L << 9)
-#define BIT_8		(1L << 8)
-#define BIT_7		(1L << 7)
-#define BIT_6		(1L << 6)
-#define BIT_5		(1L << 5)
-#define BIT_4		(1L << 4)
-#define BIT_3		(1L << 3)
-#define BIT_2		(1L << 2)
-#define BIT_1		(1L << 1)
-#define BIT_0		1L
-
-#define BIT_15S		(1U << 15)
-#define BIT_14S		(1 << 14)
-#define BIT_13S		(1 << 13)
-#define BIT_12S		(1 << 12)
-#define BIT_11S		(1 << 11)
-#define BIT_10S		(1 << 10)
-#define BIT_9S		(1 << 9)
-#define BIT_8S		(1 << 8)
-#define BIT_7S 		(1 << 7)
-#define BIT_6S		(1 << 6)
-#define BIT_5S		(1 << 5)
-#define BIT_4S		(1 << 4)
-#define BIT_3S		(1 << 3)
-#define BIT_2S		(1 << 2)
-#define BIT_1S		(1 << 1)
-#define BIT_0S		1
-
-#define SHIFT31(x)	((x) << 31)
-#define SHIFT30(x)	((x) << 30)
-#define SHIFT29(x)	((x) << 29)
-#define SHIFT28(x)	((x) << 28)
-#define SHIFT27(x)	((x) << 27)
-#define SHIFT26(x)	((x) << 26)
-#define SHIFT25(x)	((x) << 25)
-#define SHIFT24(x)	((x) << 24)
-#define SHIFT23(x)	((x) << 23)
-#define SHIFT22(x)	((x) << 22)
-#define SHIFT21(x)	((x) << 21)
-#define SHIFT20(x)	((x) << 20)
-#define SHIFT19(x)	((x) << 19)
-#define SHIFT18(x)	((x) << 18)
-#define SHIFT17(x)	((x) << 17)
-#define SHIFT16(x)	((x) << 16)
-#define SHIFT15(x)	((x) << 15)
-#define SHIFT14(x)	((x) << 14)
-#define SHIFT13(x)	((x) << 13)
-#define SHIFT12(x)	((x) << 12)
-#define SHIFT11(x)	((x) << 11)
-#define SHIFT10(x)	((x) << 10)
-#define SHIFT9(x)	((x) << 9)
-#define SHIFT8(x)	((x) << 8)
-#define SHIFT7(x)	((x) << 7)
-#define SHIFT6(x)	((x) << 6)
-#define SHIFT5(x)	((x) << 5)
-#define SHIFT4(x)	((x) << 4)
-#define SHIFT3(x)	((x) << 3)
-#define SHIFT2(x)	((x) << 2)
-#define SHIFT1(x)	((x) << 1)
-#define SHIFT0(x)	((x) << 0)
-
-/*
- * Configuration Space header
- * Since this module is used for different OS', those may be
- * duplicate on some of them (e.g. Linux). But to keep the
- * common source, we have to live with this...
- */
-#define PCI_VENDOR_ID	0x00	/* 16 bit	Vendor ID */
-#define PCI_DEVICE_ID	0x02	/* 16 bit	Device ID */
-#define PCI_COMMAND		0x04	/* 16 bit	Command */
-#define PCI_STATUS		0x06	/* 16 bit	Status */
-#define PCI_REV_ID		0x08	/*  8 bit	Revision ID */
-#define PCI_CLASS_CODE	0x09	/* 24 bit	Class Code */
-#define PCI_CACHE_LSZ	0x0c	/*  8 bit	Cache Line Size */
-#define PCI_LAT_TIM		0x0d	/*  8 bit	Latency Timer */
-#define PCI_HEADER_T	0x0e	/*  8 bit	Header Type */
-#define PCI_BIST		0x0f	/*  8 bit	Built-in selftest */
-#define PCI_BASE_1ST	0x10	/* 32 bit	1st Base address */
-#define PCI_BASE_2ND	0x14	/* 32 bit	2nd Base address */
-	/* Byte 0x18..0x2b:	reserved */
-#define PCI_SUB_VID		0x2c	/* 16 bit	Subsystem Vendor ID */
-#define PCI_SUB_ID		0x2e	/* 16 bit	Subsystem ID */
-#define PCI_BASE_ROM	0x30	/* 32 bit	Expansion ROM Base Address */
-#define PCI_CAP_PTR		0x34	/*  8 bit 	Capabilities Ptr */
-	/* Byte 0x35..0x3b:	reserved */
-#define PCI_IRQ_LINE	0x3c	/*  8 bit	Interrupt Line */
-#define PCI_IRQ_PIN		0x3d	/*  8 bit	Interrupt Pin */
-#define PCI_MIN_GNT		0x3e	/*  8 bit	Min_Gnt */
-#define PCI_MAX_LAT		0x3f	/*  8 bit	Max_Lat */
-	/* Device Dependent Region */
-#define PCI_OUR_REG_1	0x40	/* 32 bit 	Our Register 1 */
-#define PCI_OUR_REG_2	0x44	/* 32 bit 	Our Register 2 */
-	/* Power Management Region */
-#define PCI_PM_CAP_ID	0x48	/*  8 bit 	Power Management Cap. ID */
-#define PCI_PM_NITEM	0x49	/*  8 bit 	Next Item Ptr */
-#define PCI_PM_CAP_REG	0x4a	/* 16 bit 	Power Management Capabilities */
-#define PCI_PM_CTL_STS	0x4c	/* 16 bit 	Power Manag. Control/Status */
-	/* Byte 0x4e:	reserved */
-#define PCI_PM_DAT_REG	0x4f	/*  8 bit 	Power Manag. Data Register */
-	/* VPD Region */
-#define PCI_VPD_CAP_ID	0x50	/*  8 bit 	VPD Cap. ID */
-#define PCI_VPD_NITEM	0x51	/*  8 bit 	Next Item Ptr */
-#define PCI_VPD_ADR_REG	0x52	/* 16 bit 	VPD Address Register */
-#define PCI_VPD_DAT_REG	0x54	/* 32 bit 	VPD Data Register */
-	/* Byte 0x58..0x59:	reserved */
-#define PCI_SER_LD_CTRL	0x5a	/* 16 bit 	SEEPROM Loader Ctrl (YUKON only) */
-	/* Byte 0x5c..0xff:	reserved */
-
-/*
- * I2C Address (PCI Config)
- *
- * Note: The temperature and voltage sensors are relocated on a different
- *	 I2C bus.
- */
-#define I2C_ADDR_VPD	0xa0	/* I2C address for the VPD EEPROM */
-
-/*
- * Define Bits and Values of the registers
- */
-/*	PCI_COMMAND	16 bit	Command */
-								/* Bit 15..11:	reserved */
-#define PCI_INT_DIS		BIT_10S		/* Interrupt INTx# disable (PCI 2.3) */
-#define PCI_FBTEN		BIT_9S		/* Fast Back-To-Back enable */
-#define PCI_SERREN		BIT_8S		/* SERR enable */
-#define PCI_ADSTEP		BIT_7S		/* Address Stepping */
-#define PCI_PERREN		BIT_6S		/* Parity Report Response enable */
-#define PCI_VGA_SNOOP	BIT_5S		/* VGA palette snoop */
-#define PCI_MWIEN		BIT_4S		/* Memory write an inv cycl ena */
-#define PCI_SCYCEN		BIT_3S		/* Special Cycle enable */
-#define PCI_BMEN		BIT_2S		/* Bus Master enable */
-#define PCI_MEMEN		BIT_1S		/* Memory Space Access enable */
-#define PCI_IOEN		BIT_0S		/* I/O Space Access enable */
-
-#define PCI_COMMAND_VAL	(PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\
-						 PCI_BMEN | PCI_MEMEN | PCI_IOEN)
-
-/*	PCI_STATUS	16 bit	Status */
-#define PCI_PERR		BIT_15S		/* Parity Error */
-#define PCI_SERR		BIT_14S		/* Signaled SERR */
-#define PCI_RMABORT		BIT_13S		/* Received Master Abort */
-#define PCI_RTABORT		BIT_12S		/* Received Target Abort */
-								/* Bit 11:	reserved */
-#define PCI_DEVSEL		(3<<9)		/* Bit 10.. 9:	DEVSEL Timing */
-#define PCI_DEV_FAST	(0<<9)		/*		fast */
-#define PCI_DEV_MEDIUM	(1<<9)		/*		medium */
-#define PCI_DEV_SLOW	(2<<9)		/*		slow */
-#define PCI_DATAPERR	BIT_8S		/* DATA Parity error detected */
-#define PCI_FB2BCAP		BIT_7S		/* Fast Back-to-Back Capability */
-#define PCI_UDF			BIT_6S		/* User Defined Features */
-#define PCI_66MHZCAP	BIT_5S		/* 66 MHz PCI bus clock capable */
-#define PCI_NEWCAP		BIT_4S		/* New cap. list implemented */
-#define PCI_INT_STAT	BIT_3S		/* Interrupt INTx# Status (PCI 2.3) */
-								/* Bit  2.. 0:	reserved */
-
-#define PCI_ERRBITS	(PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\
-			PCI_DATAPERR)
-
-/*	PCI_CLASS_CODE	24 bit	Class Code */
-/*	Byte 2:		Base Class		(02) */
-/*	Byte 1:		SubClass		(00) */
-/*	Byte 0:		Programming Interface	(00) */
-
-/*	PCI_CACHE_LSZ	8 bit	Cache Line Size */
-/*	Possible values: 0,2,4,8,16,32,64,128	*/
-
-/*	PCI_HEADER_T	8 bit	Header Type */
-#define PCI_HD_MF_DEV	BIT_7S	/* 0= single, 1= multi-func dev */
-#define PCI_HD_TYPE		0x7f	/* Bit 6..0:	Header Layout 0= normal */
-
-/*	PCI_BIST	8 bit	Built-in selftest */
-/*	Built-in Self test not supported (optional) */
-
-/*	PCI_BASE_1ST	32 bit	1st Base address */
-#define PCI_MEMSIZE		0x4000L		/* use 16 kB Memory Base */
-#define PCI_MEMBASE_MSK 0xffffc000L	/* Bit 31..14:	Memory Base Address */
-#define PCI_MEMSIZE_MSK 0x00003ff0L	/* Bit 13.. 4:	Memory Size Req. */
-#define PCI_PREFEN		BIT_3		/* Prefetchable */
-#define PCI_MEM_TYP		(3L<<2)		/* Bit	2.. 1:	Memory Type */
-#define PCI_MEM32BIT	(0L<<1)		/* Base addr anywhere in 32 Bit range */
-#define PCI_MEM1M		(1L<<1)		/* Base addr below 1 MegaByte */
-#define PCI_MEM64BIT	(2L<<1)		/* Base addr anywhere in 64 Bit range */
-#define PCI_MEMSPACE	BIT_0		/* Memory Space Indicator */
-
-/*	PCI_BASE_2ND	32 bit	2nd Base address */
-#define PCI_IOBASE		0xffffff00L	/* Bit 31.. 8:	I/O Base address */
-#define PCI_IOSIZE		0x000000fcL	/* Bit	7.. 2:	I/O Size Requirements */
-									/* Bit	1:	reserved */
-#define PCI_IOSPACE		BIT_0		/* I/O Space Indicator */
-
-/*	PCI_BASE_ROM	32 bit	Expansion ROM Base Address */
-#define PCI_ROMBASE_MSK	0xfffe0000L	/* Bit 31..17:	ROM Base address */
-#define PCI_ROMBASE_SIZ	(0x1cL<<14)	/* Bit 16..14:	Treat as Base or Size */
-#define PCI_ROMSIZE		(0x38L<<11)	/* Bit 13..11:	ROM Size Requirements */
-									/* Bit 10.. 1:	reserved */
-#define PCI_ROMEN		BIT_0		/* Address Decode enable */
-
-/* Device Dependent Region */
-/*	PCI_OUR_REG_1		32 bit	Our Register 1 */
-									/* Bit 31..29:	reserved */
-#define PCI_PHY_COMA	BIT_28		/* Set PHY to Coma Mode (YUKON only) */
-#define PCI_TEST_CAL	BIT_27		/* Test PCI buffer calib. (YUKON only) */
-#define PCI_EN_CAL		BIT_26		/* Enable PCI buffer calib. (YUKON only) */
-#define PCI_VIO			BIT_25		/* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */
-#define PCI_DIS_BOOT	BIT_24		/* Disable BOOT via ROM */
-#define PCI_EN_IO		BIT_23		/* Mapping to I/O space */
-#define PCI_EN_FPROM	BIT_22		/* Enable FLASH mapping to memory */
-									/*		1 = Map Flash to memory */
-									/*		0 = Disable addr. dec */
-#define PCI_PAGESIZE	(3L<<20)	/* Bit 21..20:	FLASH Page Size	*/
-#define PCI_PAGE_16		(0L<<20)	/*		16 k pages	*/
-#define PCI_PAGE_32K	(1L<<20)	/*		32 k pages	*/
-#define PCI_PAGE_64K	(2L<<20)	/*		64 k pages	*/
-#define PCI_PAGE_128K	(3L<<20)	/*		128 k pages	*/
-									/* Bit 19:	reserved	*/
-#define PCI_PAGEREG		(7L<<16)	/* Bit 18..16:	Page Register	*/
-#define PCI_NOTAR		BIT_15		/* No turnaround cycle */
-#define PCI_FORCE_BE	BIT_14		/* Assert all BEs on MR */
-#define PCI_DIS_MRL		BIT_13		/* Disable Mem Read Line */
-#define PCI_DIS_MRM		BIT_12		/* Disable Mem Read Multiple */
-#define PCI_DIS_MWI		BIT_11		/* Disable Mem Write & Invalidate */
-#define PCI_DISC_CLS	BIT_10		/* Disc: cacheLsz bound */
-#define PCI_BURST_DIS	BIT_9		/* Burst Disable */
-#define PCI_DIS_PCI_CLK	BIT_8		/* Disable PCI clock driving */
-#define PCI_SKEW_DAS	(0xfL<<4)	/* Bit	7.. 4:	Skew Ctrl, DAS Ext */
-#define PCI_SKEW_BASE	0xfL		/* Bit	3.. 0:	Skew Ctrl, Base	*/
-
-
-/*	PCI_OUR_REG_2		32 bit	Our Register 2 */
-#define PCI_VPD_WR_THR	(0xffL<<24)	/* Bit 31..24:	VPD Write Threshold */
-#define PCI_DEV_SEL		(0x7fL<<17)	/* Bit 23..17:	EEPROM Device Select */
-#define PCI_VPD_ROM_SZ	(7L<<14)	/* Bit 16..14:	VPD ROM Size	*/
-									/* Bit 13..12:	reserved	*/
-#define PCI_PATCH_DIR	(0xfL<<8)	/* Bit 11.. 8:	Ext Patches dir 3..0 */
-#define PCI_PATCH_DIR_3	BIT_11
-#define PCI_PATCH_DIR_2	BIT_10
-#define PCI_PATCH_DIR_1	BIT_9
-#define PCI_PATCH_DIR_0	BIT_8
-#define PCI_EXT_PATCHS	(0xfL<<4)	/* Bit	7.. 4:	Extended Patches 3..0 */
-#define PCI_EXT_PATCH_3	BIT_7
-#define PCI_EXT_PATCH_2	BIT_6
-#define PCI_EXT_PATCH_1	BIT_5
-#define PCI_EXT_PATCH_0	BIT_4
-#define PCI_EN_DUMMY_RD	BIT_3		/* Enable Dummy Read */
-#define PCI_REV_DESC	BIT_2		/* Reverse Desc. Bytes */
-									/* Bit	1:	reserved */
-#define PCI_USEDATA64	BIT_0		/* Use 64Bit Data bus ext */
-
-
-/* Power Management Region */
-/*	PCI_PM_CAP_REG		16 bit	Power Management Capabilities */
-#define PCI_PME_SUP_MSK	(0x1f<<11)	/* Bit 15..11:	PM Event Support Mask */
-#define PCI_PME_D3C_SUP	BIT_15S		/* PME from D3cold Support (if Vaux) */
-#define PCI_PME_D3H_SUP	BIT_14S		/* PME from D3hot Support */
-#define PCI_PME_D2_SUP	BIT_13S		/* PME from D2 Support */
-#define PCI_PME_D1_SUP	BIT_12S		/* PME from D1 Support */
-#define PCI_PME_D0_SUP	BIT_11S		/* PME from D0 Support */
-#define PCI_PM_D2_SUP	BIT_10S		/* D2 Support in 33 MHz mode */
-#define PCI_PM_D1_SUP	BIT_9S		/* D1 Support */
-									/* Bit	8.. 6:	reserved */
-#define PCI_PM_DSI		BIT_5S		/* Device Specific Initialization */
-#define PCI_PM_APS		BIT_4S		/* Auxialiary Power Source */
-#define PCI_PME_CLOCK	BIT_3S		/* PM Event Clock */
-#define PCI_PM_VER_MSK		7		/* Bit	2.. 0:	PM PCI Spec. version */
-
-/*	PCI_PM_CTL_STS		16 bit	Power Management Control/Status */
-#define PCI_PME_STATUS	BIT_15S		/* PME Status (YUKON only) */
-#define PCI_PM_DAT_SCL	(3<<13)		/* Bit 14..13:	Data Reg. scaling factor */
-#define PCI_PM_DAT_SEL	(0xf<<9)	/* Bit 12.. 9:	PM data selector field */
-#define PCI_PME_EN		BIT_8S		/* Enable PME# generation (YUKON only) */
-									/* Bit	7.. 2:	reserved */
-#define PCI_PM_STATE_MSK	3		/* Bit	1.. 0:	Power Management State */
-
-#define PCI_PM_STATE_D0		0		/* D0:	Operational (default) */
-#define PCI_PM_STATE_D1		1		/* D1:	(YUKON only) */
-#define PCI_PM_STATE_D2		2		/* D2:	(YUKON only) */
-#define PCI_PM_STATE_D3 	3		/* D3:	HOT, Power Down and Reset */
-
-/* VPD Region */
-/*	PCI_VPD_ADR_REG		16 bit	VPD Address Register */
-#define PCI_VPD_FLAG	BIT_15S		/* starts VPD rd/wr cycle */
-#define PCI_VPD_ADR_MSK	0x7fffL		/* Bit 14.. 0:	VPD address mask */
-
-/*	Control Register File (Address Map) */
-
-/*
- *	Bank 0
- */
-#define B0_RAP			0x0000	/*  8 bit	Register Address Port */
-	/* 0x0001 - 0x0003:	reserved */
-#define B0_CTST			0x0004	/* 16 bit	Control/Status register */
-#define B0_LED			0x0006	/*  8 Bit	LED register */
-#define B0_POWER_CTRL	0x0007	/*  8 Bit	Power Control reg (YUKON only) */
-#define B0_ISRC			0x0008	/* 32 bit	Interrupt Source Register */
-#define B0_IMSK			0x000c	/* 32 bit	Interrupt Mask Register */
-#define B0_HWE_ISRC		0x0010	/* 32 bit	HW Error Interrupt Src Reg */
-#define B0_HWE_IMSK		0x0014	/* 32 bit	HW Error Interrupt Mask Reg */
-#define B0_SP_ISRC		0x0018	/* 32 bit	Special Interrupt Source Reg */
-	/* 0x001c:		reserved */
-
-/* B0 XMAC 1 registers (GENESIS only) */
-#define B0_XM1_IMSK		0x0020	/* 16 bit r/w	XMAC 1 Interrupt Mask Register*/
-	/* 0x0022 - 0x0027:	reserved */
-#define B0_XM1_ISRC		0x0028	/* 16 bit ro	XMAC 1 Interrupt Status Reg */
-	/* 0x002a - 0x002f:	reserved */
-#define B0_XM1_PHY_ADDR 0x0030	/* 16 bit r/w	XMAC 1 PHY Address Register */
-	/* 0x0032 - 0x0033:	reserved */
-#define B0_XM1_PHY_DATA 0x0034	/* 16 bit r/w	XMAC 1 PHY Data Register */
-	/* 0x0036 - 0x003f:	reserved */
-
-/* B0 XMAC 2 registers (GENESIS only) */
-#define B0_XM2_IMSK		0x0040	/* 16 bit r/w	XMAC 2 Interrupt Mask Register*/
-	/* 0x0042 - 0x0047:	reserved */
-#define B0_XM2_ISRC		0x0048	/* 16 bit ro	XMAC 2 Interrupt Status Reg */
-	/* 0x004a - 0x004f:	reserved */
-#define B0_XM2_PHY_ADDR 0x0050	/* 16 bit r/w	XMAC 2 PHY Address Register */
-	/* 0x0052 - 0x0053:	reserved */
-#define B0_XM2_PHY_DATA 0x0054	/* 16 bit r/w	XMAC 2 PHY Data Register */
-	/* 0x0056 - 0x005f:	reserved */
-
-/* BMU Control Status Registers */
-#define B0_R1_CSR		0x0060	/* 32 bit	BMU Ctrl/Stat Rx Queue 1 */
-#define B0_R2_CSR		0x0064	/* 32 bit	BMU Ctrl/Stat Rx Queue 2 */
-#define B0_XS1_CSR		0x0068	/* 32 bit	BMU Ctrl/Stat Sync Tx Queue 1 */
-#define B0_XA1_CSR		0x006c	/* 32 bit	BMU Ctrl/Stat Async Tx Queue 1*/
-#define B0_XS2_CSR		0x0070	/* 32 bit	BMU Ctrl/Stat Sync Tx Queue 2 */
-#define B0_XA2_CSR		0x0074	/* 32 bit	BMU Ctrl/Stat Async Tx Queue 2*/
-	/* 0x0078 - 0x007f:	reserved */
-
-/*
- *	Bank 1
- *	- completely empty (this is the RAP Block window)
- *	Note: if RAP = 1 this page is reserved
- */
-
-/*
- *	Bank 2
- */
-/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
-#define B2_MAC_1		0x0100	/* NA reg	 MAC Address 1 */
-	/* 0x0106 - 0x0107:	reserved */
-#define B2_MAC_2		0x0108	/* NA reg	 MAC Address 2 */
-	/* 0x010e - 0x010f:	reserved */
-#define B2_MAC_3		0x0110	/* NA reg	 MAC Address 3 */
-	/* 0x0116 - 0x0117:	reserved */
-#define B2_CONN_TYP		0x0118	/*  8 bit	Connector type */
-#define B2_PMD_TYP		0x0119	/*  8 bit	PMD type */
-#define B2_MAC_CFG		0x011a	/*  8 bit	MAC Configuration / Chip Revision */
-#define B2_CHIP_ID		0x011b	/*  8 bit 	Chip Identification Number */
-	/* Eprom registers are currently of no use */
-#define B2_E_0			0x011c	/*  8 bit	EPROM Byte 0 (ext. SRAM size */
-#define B2_E_1			0x011d	/*  8 bit	EPROM Byte 1 (PHY type) */
-#define B2_E_2			0x011e	/*  8 bit	EPROM Byte 2 */
-#define B2_E_3			0x011f	/*  8 bit	EPROM Byte 3 */
-#define B2_FAR			0x0120	/* 32 bit	Flash-Prom Addr Reg/Cnt */
-#define B2_FDP			0x0124	/*  8 bit	Flash-Prom Data Port */
-	/* 0x0125 - 0x0127:	reserved */
-#define B2_LD_CTRL		0x0128	/*  8 bit	EPROM loader control register */
-#define B2_LD_TEST		0x0129	/*  8 bit	EPROM loader test register */
-	/* 0x012a - 0x012f:	reserved */
-#define B2_TI_INI		0x0130	/* 32 bit	Timer Init Value */
-#define B2_TI_VAL		0x0134	/* 32 bit	Timer Value */
-#define B2_TI_CTRL		0x0138	/*  8 bit	Timer Control */
-#define B2_TI_TEST		0x0139	/*  8 Bit	Timer Test */
-	/* 0x013a - 0x013f:	reserved */
-#define B2_IRQM_INI		0x0140	/* 32 bit	IRQ Moderation Timer Init Reg.*/
-#define B2_IRQM_VAL		0x0144	/* 32 bit	IRQ Moderation Timer Value */
-#define B2_IRQM_CTRL	0x0148	/*  8 bit	IRQ Moderation Timer Control */
-#define B2_IRQM_TEST	0x0149	/*  8 bit	IRQ Moderation Timer Test */
-#define B2_IRQM_MSK 	0x014c	/* 32 bit	IRQ Moderation Mask */
-#define B2_IRQM_HWE_MSK 0x0150	/* 32 bit	IRQ Moderation HW Error Mask */
-	/* 0x0154 - 0x0157:	reserved */
-#define B2_TST_CTRL1	0x0158	/*  8 bit	Test Control Register 1 */
-#define B2_TST_CTRL2	0x0159	/*  8 bit	Test Control Register 2 */
-	/* 0x015a - 0x015b:	reserved */
-#define B2_GP_IO		0x015c	/* 32 bit	General Purpose I/O Register */
-#define B2_I2C_CTRL		0x0160	/* 32 bit	I2C HW Control Register */
-#define B2_I2C_DATA		0x0164	/* 32 bit	I2C HW Data Register */
-#define B2_I2C_IRQ		0x0168	/* 32 bit	I2C HW IRQ Register */
-#define B2_I2C_SW		0x016c	/* 32 bit	I2C SW Port Register */
-
-/* Blink Source Counter (GENESIS only) */
-#define B2_BSC_INI		0x0170	/* 32 bit	Blink Source Counter Init Val */
-#define B2_BSC_VAL		0x0174	/* 32 bit	Blink Source Counter Value */
-#define B2_BSC_CTRL		0x0178	/*  8 bit	Blink Source Counter Control */
-#define B2_BSC_STAT		0x0179	/*  8 bit	Blink Source Counter Status */
-#define B2_BSC_TST		0x017a	/* 16 bit	Blink Source Counter Test Reg */
-	/* 0x017c - 0x017f:	reserved */
-
-/*
- *	Bank 3
- */
-/* RAM Random Registers */
-#define B3_RAM_ADDR		0x0180	/* 32 bit	RAM Address, to read or write */
-#define B3_RAM_DATA_LO	0x0184	/* 32 bit	RAM Data Word (low dWord) */
-#define B3_RAM_DATA_HI	0x0188	/* 32 bit	RAM Data Word (high dWord) */
-	/* 0x018c - 0x018f:	reserved */
-
-/* RAM Interface Registers */
-/*
- * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
- * not usable in SW. Please notice these are NOT real timeouts, these are
- * the number of qWords transferred continuously.
- */
-#define B3_RI_WTO_R1	0x0190	/*  8 bit	WR Timeout Queue R1		(TO0) */
-#define B3_RI_WTO_XA1	0x0191	/*  8 bit	WR Timeout Queue XA1	(TO1) */
-#define B3_RI_WTO_XS1	0x0192	/*  8 bit	WR Timeout Queue XS1	(TO2) */
-#define B3_RI_RTO_R1	0x0193	/*  8 bit	RD Timeout Queue R1		(TO3) */
-#define B3_RI_RTO_XA1	0x0194	/*  8 bit	RD Timeout Queue XA1	(TO4) */
-#define B3_RI_RTO_XS1	0x0195	/*  8 bit	RD Timeout Queue XS1	(TO5) */
-#define B3_RI_WTO_R2	0x0196	/*  8 bit	WR Timeout Queue R2		(TO6) */
-#define B3_RI_WTO_XA2	0x0197	/*  8 bit	WR Timeout Queue XA2	(TO7) */
-#define B3_RI_WTO_XS2	0x0198	/*  8 bit	WR Timeout Queue XS2	(TO8) */
-#define B3_RI_RTO_R2	0x0199	/*  8 bit	RD Timeout Queue R2		(TO9) */
-#define B3_RI_RTO_XA2	0x019a	/*  8 bit	RD Timeout Queue XA2	(TO10)*/
-#define B3_RI_RTO_XS2	0x019b	/*  8 bit	RD Timeout Queue XS2	(TO11)*/
-#define B3_RI_TO_VAL	0x019c	/*  8 bit	Current Timeout Count Val */
-	/* 0x019d - 0x019f:	reserved */
-#define B3_RI_CTRL		0x01a0	/* 16 bit	RAM Interface Control Register */
-#define B3_RI_TEST		0x01a2	/*  8 bit	RAM Interface Test Register */
-	/* 0x01a3 - 0x01af:	reserved */
-
-/* MAC Arbiter Registers (GENESIS only) */
-/* these are the no. of qWord transferred continuously and NOT real timeouts */
-#define B3_MA_TOINI_RX1	0x01b0	/*  8 bit	Timeout Init Val Rx Path MAC 1 */
-#define B3_MA_TOINI_RX2	0x01b1	/*  8 bit	Timeout Init Val Rx Path MAC 2 */
-#define B3_MA_TOINI_TX1	0x01b2	/*  8 bit	Timeout Init Val Tx Path MAC 1 */
-#define B3_MA_TOINI_TX2	0x01b3	/*  8 bit	Timeout Init Val Tx Path MAC 2 */
-#define B3_MA_TOVAL_RX1	0x01b4	/*  8 bit	Timeout Value Rx Path MAC 1 */
-#define B3_MA_TOVAL_RX2	0x01b5	/*  8 bit	Timeout Value Rx Path MAC 1 */
-#define B3_MA_TOVAL_TX1	0x01b6	/*  8 bit	Timeout Value Tx Path MAC 2 */
-#define B3_MA_TOVAL_TX2	0x01b7	/*  8 bit	Timeout Value Tx Path MAC 2 */
-#define B3_MA_TO_CTRL	0x01b8	/* 16 bit	MAC Arbiter Timeout Ctrl Reg */
-#define B3_MA_TO_TEST	0x01ba	/* 16 bit	MAC Arbiter Timeout Test Reg */
-	/* 0x01bc - 0x01bf:	reserved */
-#define B3_MA_RCINI_RX1	0x01c0	/*  8 bit	Recovery Init Val Rx Path MAC 1 */
-#define B3_MA_RCINI_RX2	0x01c1	/*  8 bit	Recovery Init Val Rx Path MAC 2 */
-#define B3_MA_RCINI_TX1	0x01c2	/*  8 bit	Recovery Init Val Tx Path MAC 1 */
-#define B3_MA_RCINI_TX2	0x01c3	/*  8 bit	Recovery Init Val Tx Path MAC 2 */
-#define B3_MA_RCVAL_RX1	0x01c4	/*  8 bit	Recovery Value Rx Path MAC 1 */
-#define B3_MA_RCVAL_RX2	0x01c5	/*  8 bit	Recovery Value Rx Path MAC 1 */
-#define B3_MA_RCVAL_TX1	0x01c6	/*  8 bit	Recovery Value Tx Path MAC 2 */
-#define B3_MA_RCVAL_TX2	0x01c7	/*  8 bit	Recovery Value Tx Path MAC 2 */
-#define B3_MA_RC_CTRL	0x01c8	/* 16 bit	MAC Arbiter Recovery Ctrl Reg */
-#define B3_MA_RC_TEST	0x01ca	/* 16 bit	MAC Arbiter Recovery Test Reg */
-	/* 0x01cc - 0x01cf:	reserved */
-
-/* Packet Arbiter Registers (GENESIS only) */
-/* these are real timeouts */
-#define B3_PA_TOINI_RX1	0x01d0	/* 16 bit	Timeout Init Val Rx Path MAC 1 */
-	/* 0x01d2 - 0x01d3:	reserved */
-#define B3_PA_TOINI_RX2	0x01d4	/* 16 bit	Timeout Init Val Rx Path MAC 2 */
-	/* 0x01d6 - 0x01d7:	reserved */
-#define B3_PA_TOINI_TX1	0x01d8	/* 16 bit	Timeout Init Val Tx Path MAC 1 */
-	/* 0x01da - 0x01db:	reserved */
-#define B3_PA_TOINI_TX2	0x01dc	/* 16 bit	Timeout Init Val Tx Path MAC 2 */
-	/* 0x01de - 0x01df:	reserved */
-#define B3_PA_TOVAL_RX1	0x01e0	/* 16 bit	Timeout Val Rx Path MAC 1 */
-	/* 0x01e2 - 0x01e3:	reserved */
-#define B3_PA_TOVAL_RX2	0x01e4	/* 16 bit	Timeout Val Rx Path MAC 2 */
-	/* 0x01e6 - 0x01e7:	reserved */
-#define B3_PA_TOVAL_TX1	0x01e8	/* 16 bit	Timeout Val Tx Path MAC 1 */
-	/* 0x01ea - 0x01eb:	reserved */
-#define B3_PA_TOVAL_TX2	0x01ec	/* 16 bit	Timeout Val Tx Path MAC 2 */
-	/* 0x01ee - 0x01ef:	reserved */
-#define B3_PA_CTRL	0x01f0	/* 16 bit	Packet Arbiter Ctrl Register */
-#define B3_PA_TEST	0x01f2	/* 16 bit	Packet Arbiter Test Register */
-	/* 0x01f4 - 0x01ff:	reserved */
-
-/*
- *	Bank 4 - 5
- */
-/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
-#define TXA_ITI_INI		0x0200	/* 32 bit	Tx Arb Interval Timer Init Val*/
-#define TXA_ITI_VAL		0x0204	/* 32 bit	Tx Arb Interval Timer Value */
-#define TXA_LIM_INI		0x0208	/* 32 bit	Tx Arb Limit Counter Init Val */
-#define TXA_LIM_VAL		0x020c	/* 32 bit	Tx Arb Limit Counter Value */
-#define TXA_CTRL		0x0210	/*  8 bit	Tx Arbiter Control Register */
-#define TXA_TEST		0x0211	/*  8 bit	Tx Arbiter Test Register */
-#define TXA_STAT		0x0212	/*  8 bit	Tx Arbiter Status Register */
-	/* 0x0213 - 0x027f:	reserved */
-	/* 0x0280 - 0x0292:	MAC 2 */
-	/* 0x0213 - 0x027f:	reserved */
-
-/*
- *	Bank 6
- */
-/* External registers (GENESIS only) */
-#define B6_EXT_REG		0x0300
-
-/*
- *	Bank 7
- */
-/* This is a copy of the Configuration register file (lower half) */
-#define B7_CFG_SPC		0x0380
-
-/*
- *	Bank 8 - 15
- */
-/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
-#define B8_Q_REGS		0x0400
-
-/* Queue Register Offsets, use Q_ADDR() to access */
-#define Q_D		0x00	/* 8*32	bit	Current Descriptor */
-#define Q_DA_L	0x20	/* 32 bit	Current Descriptor Address Low dWord */
-#define Q_DA_H	0x24	/* 32 bit	Current Descriptor Address High dWord */
-#define Q_AC_L	0x28	/* 32 bit	Current Address Counter Low dWord */
-#define Q_AC_H	0x2c	/* 32 bit	Current Address Counter High dWord */
-#define Q_BC	0x30	/* 32 bit	Current Byte Counter */
-#define Q_CSR	0x34	/* 32 bit	BMU Control/Status Register */
-#define Q_F		0x38	/* 32 bit	Flag Register */
-#define Q_T1	0x3c	/* 32 bit	Test Register 1 */
-#define Q_T1_TR	0x3c	/*  8 bit	Test Register 1 Transfer SM */
-#define Q_T1_WR	0x3d	/*  8 bit	Test Register 1 Write Descriptor SM */
-#define Q_T1_RD	0x3e	/*  8 bit	Test Register 1 Read Descriptor SM */
-#define Q_T1_SV	0x3f	/*  8 bit	Test Register 1 Supervisor SM */
-#define Q_T2	0x40	/* 32 bit	Test Register 2	*/
-#define Q_T3	0x44	/* 32 bit	Test Register 3	*/
-	/* 0x48 - 0x7f:	reserved */
-
-/*
- *	Bank 16 - 23
- */
-/* RAM Buffer Registers */
-#define B16_RAM_REGS	0x0800
-
-/* RAM Buffer Register Offsets, use RB_ADDR() to access */
-#define RB_START		0x00	/* 32 bit	RAM Buffer Start Address */
-#define RB_END			0x04	/* 32 bit	RAM Buffer End Address */
-#define RB_WP			0x08	/* 32 bit	RAM Buffer Write Pointer */
-#define RB_RP			0x0c	/* 32 bit	RAM Buffer Read Pointer */
-#define RB_RX_UTPP		0x10	/* 32 bit	Rx Upper Threshold, Pause Pack */
-#define RB_RX_LTPP		0x14	/* 32 bit	Rx Lower Threshold, Pause Pack */
-#define RB_RX_UTHP		0x18	/* 32 bit	Rx Upper Threshold, High Prio */
-#define RB_RX_LTHP		0x1c	/* 32 bit	Rx Lower Threshold, High Prio */
-	/* 0x10 - 0x1f:	reserved at Tx RAM Buffer Registers */
-#define RB_PC			0x20	/* 32 bit	RAM Buffer Packet Counter */
-#define RB_LEV			0x24	/* 32 bit	RAM Buffer Level Register */
-#define RB_CTRL			0x28	/*  8 bit	RAM Buffer Control Register */
-#define RB_TST1			0x29	/*  8 bit	RAM Buffer Test Register 1 */
-#define RB_TST2			0x2A	/*  8 bit	RAM Buffer Test Register 2 */
-	/* 0x2c - 0x7f:	reserved */
-
-/*
- *	Bank 24
- */
-/*
- * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only)
- * use MR_ADDR() to access
- */
-#define RX_MFF_EA		0x0c00	/* 32 bit	Receive MAC FIFO End Address */
-#define RX_MFF_WP		0x0c04	/* 32 bit 	Receive MAC FIFO Write Pointer */
-	/* 0x0c08 - 0x0c0b:	reserved */
-#define RX_MFF_RP		0x0c0c	/* 32 bit	Receive MAC FIFO Read Pointer */
-#define RX_MFF_PC		0x0c10	/* 32 bit	Receive MAC FIFO Packet Cnt */
-#define RX_MFF_LEV		0x0c14	/* 32 bit	Receive MAC FIFO Level */
-#define RX_MFF_CTRL1	0x0c18	/* 16 bit	Receive MAC FIFO Control Reg 1*/
-#define RX_MFF_STAT_TO	0x0c1a	/*  8 bit	Receive MAC Status Timeout */
-#define RX_MFF_TIST_TO	0x0c1b	/*  8 bit	Receive MAC Time Stamp Timeout */
-#define RX_MFF_CTRL2	0x0c1c	/*  8 bit	Receive MAC FIFO Control Reg 2*/
-#define RX_MFF_TST1		0x0c1d	/*  8 bit	Receive MAC FIFO Test Reg 1 */
-#define RX_MFF_TST2		0x0c1e	/*  8 bit	Receive MAC FIFO Test Reg 2 */
-	/* 0x0c1f:	reserved */
-#define RX_LED_INI		0x0c20	/* 32 bit	Receive LED Cnt Init Value */
-#define RX_LED_VAL		0x0c24	/* 32 bit	Receive LED Cnt Current Value */
-#define RX_LED_CTRL		0x0c28	/*  8 bit	Receive LED Cnt Control Reg */
-#define RX_LED_TST		0x0c29	/*  8 bit	Receive LED Cnt Test Register */
-	/* 0x0c2a - 0x0c2f:	reserved */
-#define LNK_SYNC_INI	0x0c30	/* 32 bit	Link Sync Cnt Init Value */
-#define LNK_SYNC_VAL	0x0c34	/* 32 bit	Link Sync Cnt Current Value */
-#define LNK_SYNC_CTRL	0x0c38	/*  8 bit	Link Sync Cnt Control Register */
-#define LNK_SYNC_TST	0x0c39	/*  8 bit	Link Sync Cnt Test Register */
-	/* 0x0c3a - 0x0c3b:	reserved */
-#define LNK_LED_REG		0x0c3c	/*  8 bit	Link LED Register */
-	/* 0x0c3d - 0x0c3f:	reserved */
-
-/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */
-#define RX_GMF_EA		0x0c40	/* 32 bit	Rx GMAC FIFO End Address */
-#define RX_GMF_AF_THR	0x0c44	/* 32 bit	Rx GMAC FIFO Almost Full Thresh. */
-#define RX_GMF_CTRL_T	0x0c48	/* 32 bit	Rx GMAC FIFO Control/Test */
-#define RX_GMF_FL_MSK	0x0c4c	/* 32 bit	Rx GMAC FIFO Flush Mask */
-#define RX_GMF_FL_THR	0x0c50	/* 32 bit	Rx GMAC FIFO Flush Threshold */
-	/* 0x0c54 - 0x0c5f:	reserved */
-#define RX_GMF_WP		0x0c60	/* 32 bit 	Rx GMAC FIFO Write Pointer */
-	/* 0x0c64 - 0x0c67:	reserved */
-#define RX_GMF_WLEV		0x0c68	/* 32 bit 	Rx GMAC FIFO Write Level */
-	/* 0x0c6c - 0x0c6f:	reserved */
-#define RX_GMF_RP		0x0c70	/* 32 bit 	Rx GMAC FIFO Read Pointer */
-	/* 0x0c74 - 0x0c77:	reserved */
-#define RX_GMF_RLEV		0x0c78	/* 32 bit 	Rx GMAC FIFO Read Level */
-	/* 0x0c7c - 0x0c7f:	reserved */
-
-/*
- *	Bank 25
- */
-	/* 0x0c80 - 0x0cbf:	MAC 2 */
-	/* 0x0cc0 - 0x0cff:	reserved */
-
-/*
- *	Bank 26
- */
-/*
- * Transmit MAC FIFO and Transmit LED Registers (GENESIS only),
- * use MR_ADDR() to access
- */
-#define TX_MFF_EA		0x0d00	/* 32 bit	Transmit MAC FIFO End Address */
-#define TX_MFF_WP		0x0d04	/* 32 bit 	Transmit MAC FIFO WR Pointer */
-#define TX_MFF_WSP		0x0d08	/* 32 bit	Transmit MAC FIFO WR Shadow Ptr */
-#define TX_MFF_RP		0x0d0c	/* 32 bit	Transmit MAC FIFO RD Pointer */
-#define TX_MFF_PC		0x0d10	/* 32 bit	Transmit MAC FIFO Packet Cnt */
-#define TX_MFF_LEV		0x0d14	/* 32 bit	Transmit MAC FIFO Level */
-#define TX_MFF_CTRL1	0x0d18	/* 16 bit	Transmit MAC FIFO Ctrl Reg 1 */
-#define TX_MFF_WAF		0x0d1a	/*  8 bit	Transmit MAC Wait after flush */
-	/* 0x0c1b:	reserved */
-#define TX_MFF_CTRL2	0x0d1c	/*  8 bit	Transmit MAC FIFO Ctrl Reg 2 */
-#define TX_MFF_TST1		0x0d1d	/*  8 bit	Transmit MAC FIFO Test Reg 1 */
-#define TX_MFF_TST2		0x0d1e	/*  8 bit	Transmit MAC FIFO Test Reg 2 */
-	/* 0x0d1f:	reserved */
-#define TX_LED_INI		0x0d20	/* 32 bit	Transmit LED Cnt Init Value */
-#define TX_LED_VAL		0x0d24	/* 32 bit	Transmit LED Cnt Current Val */
-#define TX_LED_CTRL		0x0d28	/*  8 bit	Transmit LED Cnt Control Reg */
-#define TX_LED_TST		0x0d29	/*  8 bit	Transmit LED Cnt Test Reg */
-	/* 0x0d2a - 0x0d3f:	reserved */
-
-/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */
-#define TX_GMF_EA		0x0d40	/* 32 bit	Tx GMAC FIFO End Address */
-#define TX_GMF_AE_THR	0x0d44	/* 32 bit	Tx GMAC FIFO Almost Empty Thresh.*/
-#define TX_GMF_CTRL_T	0x0d48	/* 32 bit	Tx GMAC FIFO Control/Test */
-	/* 0x0d4c - 0x0d5f:	reserved */
-#define TX_GMF_WP		0x0d60	/* 32 bit 	Tx GMAC FIFO Write Pointer */
-#define TX_GMF_WSP		0x0d64	/* 32 bit 	Tx GMAC FIFO Write Shadow Ptr. */
-#define TX_GMF_WLEV		0x0d68	/* 32 bit 	Tx GMAC FIFO Write Level */
-	/* 0x0d6c - 0x0d6f:	reserved */
-#define TX_GMF_RP		0x0d70	/* 32 bit 	Tx GMAC FIFO Read Pointer */
-#define TX_GMF_RSTP		0x0d74	/* 32 bit 	Tx GMAC FIFO Restart Pointer */
-#define TX_GMF_RLEV		0x0d78	/* 32 bit 	Tx GMAC FIFO Read Level */
-	/* 0x0d7c - 0x0d7f:	reserved */
-
-/*
- *	Bank 27
- */
-	/* 0x0d80 - 0x0dbf:	MAC 2 */
-	/* 0x0daa - 0x0dff:	reserved */
-
-/*
- *	Bank 28
- */
-/* Descriptor Poll Timer Registers */
-#define B28_DPT_INI		0x0e00	/* 24 bit	Descriptor Poll Timer Init Val */
-#define B28_DPT_VAL		0x0e04	/* 24 bit	Descriptor Poll Timer Curr Val */
-#define B28_DPT_CTRL	0x0e08	/*  8 bit	Descriptor Poll Timer Ctrl Reg */
-	/* 0x0e09:	reserved */
-#define B28_DPT_TST		0x0e0a	/*  8 bit	Descriptor Poll Timer Test Reg */
-	/* 0x0e0b:	reserved */
-
-/* Time Stamp Timer Registers (YUKON only) */
-	/* 0x0e10:	reserved */
-#define GMAC_TI_ST_VAL	0x0e14	/* 32 bit	Time Stamp Timer Curr Val */
-#define GMAC_TI_ST_CTRL	0x0e18	/*  8 bit	Time Stamp Timer Ctrl Reg */
-	/* 0x0e19:	reserved */
-#define GMAC_TI_ST_TST	0x0e1a	/*  8 bit	Time Stamp Timer Test Reg */
-	/* 0x0e1b - 0x0e7f:	reserved */
-
-/*
- *	Bank 29
- */
-	/* 0x0e80 - 0x0efc:	reserved */
-
-/*
- *	Bank 30
- */
-/* GMAC and GPHY Control Registers (YUKON only) */
-#define GMAC_CTRL		0x0f00	/* 32 bit	GMAC Control Reg */
-#define GPHY_CTRL		0x0f04	/* 32 bit	GPHY Control Reg */
-#define GMAC_IRQ_SRC	0x0f08	/*  8 bit	GMAC Interrupt Source Reg */
-	/* 0x0f09 - 0x0f0b:	reserved */
-#define GMAC_IRQ_MSK	0x0f0c	/*  8 bit	GMAC Interrupt Mask Reg */
-	/* 0x0f0d - 0x0f0f:	reserved */
-#define GMAC_LINK_CTRL	0x0f10	/* 16 bit	Link Control Reg */
-	/* 0x0f14 - 0x0f1f:	reserved */
-
-/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
-
-#define WOL_REG_OFFS	0x20	/* HW-Bug: Address is + 0x20 against spec. */
-
-#define WOL_CTRL_STAT	0x0f20	/* 16 bit	WOL Control/Status Reg */
-#define WOL_MATCH_CTL	0x0f22	/*  8 bit	WOL Match Control Reg */
-#define WOL_MATCH_RES	0x0f23	/*  8 bit	WOL Match Result Reg */
-#define WOL_MAC_ADDR_LO	0x0f24	/* 32 bit	WOL MAC Address Low */
-#define WOL_MAC_ADDR_HI	0x0f28	/* 16 bit	WOL MAC Address High */
-#define WOL_PATT_RPTR	0x0f2c	/*  8 bit	WOL Pattern Read Ptr */
-
-/* use this macro to access above registers */
-#define WOL_REG(Reg)	((Reg) + (pAC->GIni.GIWolOffs))
-
-
-/* WOL Pattern Length Registers (YUKON only) */
-
-#define WOL_PATT_LEN_LO	0x0f30		/* 32 bit	WOL Pattern Length 3..0 */
-#define WOL_PATT_LEN_HI	0x0f34		/* 24 bit	WOL Pattern Length 6..4 */
-
-/* WOL Pattern Counter Registers (YUKON only) */
-
-#define WOL_PATT_CNT_0	0x0f38		/* 32 bit	WOL Pattern Counter 3..0 */
-#define WOL_PATT_CNT_4	0x0f3c		/* 24 bit	WOL Pattern Counter 6..4 */
-	/* 0x0f40 - 0x0f7f:	reserved */
-
-/*
- *	Bank 31
- */
-/* 0x0f80 - 0x0fff:	reserved */
-
-/*
- *	Bank 32	- 33
- */
-#define WOL_PATT_RAM_1	0x1000	/*  WOL Pattern RAM Link 1 */
-
-/*
- *	Bank 0x22 - 0x3f
- */
-/* 0x1100 - 0x1fff:	reserved */
-
-/*
- *	Bank 0x40 - 0x4f
- */
-#define BASE_XMAC_1		0x2000	/* XMAC 1 registers */
-
-/*
- *	Bank 0x50 - 0x5f
- */
-
-#define BASE_GMAC_1		0x2800	/* GMAC 1 registers */
-
-/*
- *	Bank 0x60 - 0x6f
- */
-#define BASE_XMAC_2		0x3000	/* XMAC 2 registers */
-
-/*
- *	Bank 0x70 - 0x7f
- */
-#define BASE_GMAC_2		0x3800	/* GMAC 2 registers */
-
-/*
- *	Control Register Bit Definitions:
- */
-/*	B0_RAP		8 bit	Register Address Port */
-								/* Bit 7:	reserved */
-#define RAP_RAP			0x3f	/* Bit 6..0:	0 = block 0,..,6f = block 6f */
-
-/*	B0_CTST			16 bit	Control/Status register */
-								/* Bit 15..14:	reserved */
-#define CS_CLK_RUN_HOT	BIT_13S		/* CLK_RUN hot m. (YUKON-Lite only) */
-#define CS_CLK_RUN_RST	BIT_12S		/* CLK_RUN reset  (YUKON-Lite only) */
-#define CS_CLK_RUN_ENA	BIT_11S		/* CLK_RUN enable (YUKON-Lite only) */
-#define CS_VAUX_AVAIL	BIT_10S		/* VAUX available (YUKON only) */
-#define CS_BUS_CLOCK	BIT_9S		/* Bus Clock 0/1 = 33/66 MHz */
-#define CS_BUS_SLOT_SZ	BIT_8S		/* Slot Size 0/1 = 32/64 bit slot */
-#define CS_ST_SW_IRQ	BIT_7S		/* Set IRQ SW Request */
-#define CS_CL_SW_IRQ	BIT_6S		/* Clear IRQ SW Request */
-#define CS_STOP_DONE	BIT_5S		/* Stop Master is finished */
-#define CS_STOP_MAST	BIT_4S		/* Command Bit to stop the master */
-#define CS_MRST_CLR		BIT_3S		/* Clear Master reset	*/
-#define CS_MRST_SET		BIT_2S		/* Set Master reset	*/
-#define CS_RST_CLR		BIT_1S		/* Clear Software reset	*/
-#define CS_RST_SET		BIT_0S		/* Set   Software reset	*/
-
-/*	B0_LED			 8 Bit	LED register */
-								/* Bit  7.. 2:	reserved */
-#define LED_STAT_ON		BIT_1S		/* Status LED on	*/
-#define LED_STAT_OFF	BIT_0S		/* Status LED off	*/
-
-/*	B0_POWER_CTRL	 8 Bit	Power Control reg (YUKON only) */
-#define PC_VAUX_ENA		BIT_7		/* Switch VAUX Enable  */
-#define PC_VAUX_DIS		BIT_6       /* Switch VAUX Disable */
-#define PC_VCC_ENA		BIT_5       /* Switch VCC Enable  */
-#define PC_VCC_DIS		BIT_4       /* Switch VCC Disable */
-#define PC_VAUX_ON		BIT_3       /* Switch VAUX On  */
-#define PC_VAUX_OFF		BIT_2       /* Switch VAUX Off */
-#define PC_VCC_ON		BIT_1       /* Switch VCC On  */
-#define PC_VCC_OFF		BIT_0       /* Switch VCC Off */
-
-/*	B0_ISRC			32 bit	Interrupt Source Register */
-/*	B0_IMSK			32 bit	Interrupt Mask Register */
-/*	B0_SP_ISRC		32 bit	Special Interrupt Source Reg */
-/*	B2_IRQM_MSK 	32 bit	IRQ Moderation Mask */
-#define IS_ALL_MSK		0xbfffffffUL	/* All Interrupt bits */
-#define IS_HW_ERR		BIT_31		/* Interrupt HW Error */
-								/* Bit 30:	reserved */
-#define IS_PA_TO_RX1	BIT_29		/* Packet Arb Timeout Rx1 */
-#define IS_PA_TO_RX2	BIT_28		/* Packet Arb Timeout Rx2 */
-#define IS_PA_TO_TX1	BIT_27		/* Packet Arb Timeout Tx1 */
-#define IS_PA_TO_TX2	BIT_26		/* Packet Arb Timeout Tx2 */
-#define IS_I2C_READY	BIT_25		/* IRQ on end of I2C Tx */
-#define IS_IRQ_SW		BIT_24		/* SW forced IRQ	*/
-#define IS_EXT_REG		BIT_23		/* IRQ from LM80 or PHY (GENESIS only) */
-									/* IRQ from PHY (YUKON only) */
-#define IS_TIMINT		BIT_22		/* IRQ from Timer	*/
-#define IS_MAC1			BIT_21		/* IRQ from MAC 1	*/
-#define IS_LNK_SYNC_M1	BIT_20		/* Link Sync Cnt wrap MAC 1 */
-#define IS_MAC2			BIT_19		/* IRQ from MAC 2	*/
-#define IS_LNK_SYNC_M2	BIT_18		/* Link Sync Cnt wrap MAC 2 */
-/* Receive Queue 1 */
-#define IS_R1_B			BIT_17		/* Q_R1 End of Buffer */
-#define IS_R1_F			BIT_16		/* Q_R1 End of Frame */
-#define IS_R1_C			BIT_15		/* Q_R1 Encoding Error */
-/* Receive Queue 2 */
-#define IS_R2_B			BIT_14		/* Q_R2 End of Buffer */
-#define IS_R2_F			BIT_13		/* Q_R2 End of Frame */
-#define IS_R2_C			BIT_12		/* Q_R2 Encoding Error */
-/* Synchronous Transmit Queue 1 */
-#define IS_XS1_B		BIT_11		/* Q_XS1 End of Buffer */
-#define IS_XS1_F		BIT_10		/* Q_XS1 End of Frame */
-#define IS_XS1_C		BIT_9		/* Q_XS1 Encoding Error */
-/* Asynchronous Transmit Queue 1 */
-#define IS_XA1_B		BIT_8		/* Q_XA1 End of Buffer */
-#define IS_XA1_F		BIT_7		/* Q_XA1 End of Frame */
-#define IS_XA1_C		BIT_6		/* Q_XA1 Encoding Error */
-/* Synchronous Transmit Queue 2 */
-#define IS_XS2_B		BIT_5		/* Q_XS2 End of Buffer */
-#define IS_XS2_F		BIT_4		/* Q_XS2 End of Frame */
-#define IS_XS2_C		BIT_3		/* Q_XS2 Encoding Error */
-/* Asynchronous Transmit Queue 2 */
-#define IS_XA2_B		BIT_2		/* Q_XA2 End of Buffer */
-#define IS_XA2_F		BIT_1		/* Q_XA2 End of Frame */
-#define IS_XA2_C		BIT_0		/* Q_XA2 Encoding Error */
-
-
-/*	B0_HWE_ISRC		32 bit	HW Error Interrupt Src Reg */
-/*	B0_HWE_IMSK		32 bit	HW Error Interrupt Mask Reg */
-/*	B2_IRQM_HWE_MSK	32 bit	IRQ Moderation HW Error Mask */
-#define IS_ERR_MSK		0x00000fffL	/* 		All Error bits */
-								/* Bit 31..14:	reserved */
-#define IS_IRQ_TIST_OV	BIT_13	/* Time Stamp Timer Overflow (YUKON only) */
-#define IS_IRQ_SENSOR	BIT_12	/* IRQ from Sensor (YUKON only) */
-#define IS_IRQ_MST_ERR	BIT_11	/* IRQ master error detected */
-#define IS_IRQ_STAT		BIT_10	/* IRQ status exception */
-#define IS_NO_STAT_M1	BIT_9	/* No Rx Status from MAC 1 */
-#define IS_NO_STAT_M2	BIT_8	/* No Rx Status from MAC 2 */
-#define IS_NO_TIST_M1	BIT_7	/* No Time Stamp from MAC 1 */
-#define IS_NO_TIST_M2	BIT_6	/* No Time Stamp from MAC 2 */
-#define IS_RAM_RD_PAR	BIT_5	/* RAM Read  Parity Error */
-#define IS_RAM_WR_PAR	BIT_4	/* RAM Write Parity Error */
-#define IS_M1_PAR_ERR	BIT_3	/* MAC 1 Parity Error */
-#define IS_M2_PAR_ERR	BIT_2	/* MAC 2 Parity Error */
-#define IS_R1_PAR_ERR	BIT_1	/* Queue R1 Parity Error */
-#define IS_R2_PAR_ERR	BIT_0	/* Queue R2 Parity Error */
-
-/*	B2_CONN_TYP		 8 bit	Connector type */
-/*	B2_PMD_TYP		 8 bit	PMD type */
-/*	Values of connector and PMD type comply to SysKonnect internal std */
-
-/*	B2_MAC_CFG		 8 bit	MAC Configuration / Chip Revision */
-#define CFG_CHIP_R_MSK	(0xf<<4)	/* Bit 7.. 4: Chip Revision */
-									/* Bit 3.. 2:	reserved */
-#define CFG_DIS_M2_CLK	BIT_1S		/* Disable Clock for 2nd MAC */
-#define CFG_SNG_MAC		BIT_0S		/* MAC Config: 0=2 MACs / 1=1 MAC*/
-
-/*	B2_CHIP_ID		 8 bit 	Chip Identification Number */
-#define CHIP_ID_GENESIS		0x0a	/* Chip ID for GENESIS */
-#define CHIP_ID_YUKON		0xb0	/* Chip ID for YUKON */
-#define CHIP_ID_YUKON_LITE	0xb1	/* Chip ID for YUKON-Lite (Rev. A1-A3) */
-#define CHIP_ID_YUKON_LP	0xb2	/* Chip ID for YUKON-LP */
-
-#define CHIP_REV_YU_LITE_A1	3		/* Chip Rev. for YUKON-Lite A1,A2 */
-#define CHIP_REV_YU_LITE_A3	7		/* Chip Rev. for YUKON-Lite A3 */
-
-/*	B2_FAR			32 bit	Flash-Prom Addr Reg/Cnt */
-#define FAR_ADDR		0x1ffffL	/* Bit 16.. 0:	FPROM Address mask */
-
-/*	B2_LD_CTRL		 8 bit	EPROM loader control register */
-/*	Bits are currently reserved */
-
-/*	B2_LD_TEST		 8 bit	EPROM loader test register */
-								/* Bit 7.. 4:	reserved */
-#define LD_T_ON			BIT_3S	/* Loader Test mode on */
-#define LD_T_OFF		BIT_2S	/* Loader Test mode off */
-#define LD_T_STEP		BIT_1S	/* Decrement FPROM addr. Counter */
-#define LD_START		BIT_0S	/* Start loading FPROM */
-
-/*
- *	Timer Section
- */
-/*	B2_TI_CTRL		 8 bit	Timer control */
-/*	B2_IRQM_CTRL	 8 bit	IRQ Moderation Timer Control */
-								/* Bit 7.. 3:	reserved */
-#define TIM_START		BIT_2S	/* Start Timer */
-#define TIM_STOP		BIT_1S	/* Stop  Timer */
-#define TIM_CLR_IRQ		BIT_0S	/* Clear Timer IRQ (!IRQM) */
-
-/*	B2_TI_TEST		 8 Bit	Timer Test */
-/*	B2_IRQM_TEST	 8 bit	IRQ Moderation Timer Test */
-/*	B28_DPT_TST		 8 bit	Descriptor Poll Timer Test Reg */
-								/* Bit 7.. 3:	reserved */
-#define TIM_T_ON		BIT_2S	/* Test mode on */
-#define TIM_T_OFF		BIT_1S	/* Test mode off */
-#define TIM_T_STEP		BIT_0S	/* Test step */
-
-/*	B28_DPT_INI	32 bit	Descriptor Poll Timer Init Val */
-/*	B28_DPT_VAL	32 bit	Descriptor Poll Timer Curr Val */
-								/* Bit 31..24:	reserved */
-#define DPT_MSK		0x00ffffffL	/* Bit 23.. 0:	Desc Poll Timer Bits */
-
-/*	B28_DPT_CTRL	 8 bit	Descriptor Poll Timer Ctrl Reg */
-								/* Bit  7.. 2:	reserved */
-#define DPT_START		BIT_1S	/* Start Descriptor Poll Timer */
-#define DPT_STOP		BIT_0S	/* Stop  Descriptor Poll Timer */
-
-/*	B2_E_3			 8 bit 	lower 4 bits used for HW self test result */
-#define B2_E3_RES_MASK	0x0f
-
-/*	B2_TST_CTRL1	 8 bit	Test Control Register 1 */
-#define TST_FRC_DPERR_MR	BIT_7S	/* force DATAPERR on MST RD */
-#define TST_FRC_DPERR_MW	BIT_6S	/* force DATAPERR on MST WR */
-#define TST_FRC_DPERR_TR	BIT_5S	/* force DATAPERR on TRG RD */
-#define TST_FRC_DPERR_TW	BIT_4S	/* force DATAPERR on TRG WR */
-#define TST_FRC_APERR_M		BIT_3S	/* force ADDRPERR on MST */
-#define TST_FRC_APERR_T		BIT_2S	/* force ADDRPERR on TRG */
-#define TST_CFG_WRITE_ON	BIT_1S	/* Enable  Config Reg WR */
-#define TST_CFG_WRITE_OFF	BIT_0S	/* Disable Config Reg WR */
-
-/*	B2_TST_CTRL2	 8 bit	Test Control Register 2 */
-									/* Bit 7.. 4:	reserved */
-			/* force the following error on the next master read/write	*/
-#define TST_FRC_DPERR_MR64	BIT_3S	/* DataPERR RD 64	*/
-#define TST_FRC_DPERR_MW64	BIT_2S	/* DataPERR WR 64	*/
-#define TST_FRC_APERR_1M64	BIT_1S	/* AddrPERR on 1. phase */
-#define TST_FRC_APERR_2M64	BIT_0S	/* AddrPERR on 2. phase */
-
-/*	B2_GP_IO		32 bit	General Purpose I/O Register */
-							/* Bit 31..26:	reserved */
-#define GP_DIR_9	BIT_25	/* IO_9 direct, 0=In/1=Out */
-#define GP_DIR_8	BIT_24	/* IO_8 direct, 0=In/1=Out */
-#define GP_DIR_7	BIT_23	/* IO_7 direct, 0=In/1=Out */
-#define GP_DIR_6	BIT_22	/* IO_6 direct, 0=In/1=Out */
-#define GP_DIR_5	BIT_21	/* IO_5 direct, 0=In/1=Out */
-#define GP_DIR_4	BIT_20	/* IO_4 direct, 0=In/1=Out */
-#define GP_DIR_3	BIT_19	/* IO_3 direct, 0=In/1=Out */
-#define GP_DIR_2	BIT_18	/* IO_2 direct, 0=In/1=Out */
-#define GP_DIR_1	BIT_17	/* IO_1 direct, 0=In/1=Out */
-#define GP_DIR_0	BIT_16	/* IO_0 direct, 0=In/1=Out */
-						/* Bit 15..10:	reserved */
-#define GP_IO_9		BIT_9	/* IO_9 pin */
-#define GP_IO_8		BIT_8	/* IO_8 pin */
-#define GP_IO_7		BIT_7	/* IO_7 pin */
-#define GP_IO_6		BIT_6	/* IO_6 pin */
-#define GP_IO_5		BIT_5	/* IO_5 pin */
-#define GP_IO_4		BIT_4	/* IO_4 pin */
-#define GP_IO_3		BIT_3	/* IO_3 pin */
-#define GP_IO_2		BIT_2	/* IO_2 pin */
-#define GP_IO_1		BIT_1	/* IO_1 pin */
-#define GP_IO_0		BIT_0	/* IO_0 pin */
-
-/*	B2_I2C_CTRL		32 bit	I2C HW Control Register */
-#define I2C_FLAG		BIT_31		/* Start read/write if WR */
-#define I2C_ADDR		(0x7fffL<<16)	/* Bit 30..16:	Addr to be RD/WR */
-#define I2C_DEV_SEL		(0x7fL<<9)		/* Bit 15.. 9:	I2C Device Select */
-								/* Bit	8.. 5:	reserved	*/
-#define I2C_BURST_LEN	BIT_4		/* Burst Len, 1/4 bytes */
-#define I2C_DEV_SIZE	(7<<1)		/* Bit	3.. 1:	I2C Device Size	*/
-#define I2C_025K_DEV	(0<<1)		/*		0: 256 Bytes or smal. */
-#define I2C_05K_DEV		(1<<1)		/* 		1: 512	Bytes	*/
-#define I2C_1K_DEV		(2<<1)		/*		2: 1024 Bytes	*/
-#define I2C_2K_DEV		(3<<1)		/*		3: 2048	Bytes	*/
-#define I2C_4K_DEV		(4<<1)		/*		4: 4096 Bytes	*/
-#define I2C_8K_DEV		(5<<1)		/*		5: 8192 Bytes	*/
-#define I2C_16K_DEV		(6<<1)		/*		6: 16384 Bytes	*/
-#define I2C_32K_DEV		(7<<1)		/*		7: 32768 Bytes	*/
-#define I2C_STOP		BIT_0		/* Interrupt I2C transfer */
-
-/*	B2_I2C_IRQ		32 bit	I2C HW IRQ Register */
-								/* Bit 31.. 1	reserved */
-#define I2C_CLR_IRQ		BIT_0	/* Clear I2C IRQ */
-
-/*	B2_I2C_SW		32 bit (8 bit access)	I2C HW SW Port Register */
-								/* Bit  7.. 3:	reserved */
-#define I2C_DATA_DIR	BIT_2S		/* direction of I2C_DATA */
-#define I2C_DATA		BIT_1S		/* I2C Data Port	*/
-#define I2C_CLK			BIT_0S		/* I2C Clock Port	*/
-
-/*
- * I2C Address
- */
-#define I2C_SENS_ADDR	LM80_ADDR	/* I2C Sensor Address, (Volt and Temp)*/
-
-
-/*	B2_BSC_CTRL		 8 bit	Blink Source Counter Control */
-							/* Bit  7.. 2:	reserved */
-#define BSC_START	BIT_1S		/* Start Blink Source Counter */
-#define BSC_STOP	BIT_0S		/* Stop  Blink Source Counter */
-
-/*	B2_BSC_STAT		 8 bit	Blink Source Counter Status */
-							/* Bit  7.. 1:	reserved */
-#define BSC_SRC		BIT_0S		/* Blink Source, 0=Off / 1=On */
-
-/*	B2_BSC_TST		16 bit	Blink Source Counter Test Reg */
-#define BSC_T_ON	BIT_2S		/* Test mode on */
-#define BSC_T_OFF	BIT_1S		/* Test mode off */
-#define BSC_T_STEP	BIT_0S		/* Test step */
-
-
-/*	B3_RAM_ADDR		32 bit	RAM Address, to read or write */
-					/* Bit 31..19:	reserved */
-#define RAM_ADR_RAN	0x0007ffffL	/* Bit 18.. 0:	RAM Address Range */
-
-/* RAM Interface Registers */
-/*	B3_RI_CTRL		16 bit	RAM Iface Control Register */
-								/* Bit 15..10:	reserved */
-#define RI_CLR_RD_PERR	BIT_9S	/* Clear IRQ RAM Read Parity Err */
-#define RI_CLR_WR_PERR	BIT_8S	/* Clear IRQ RAM Write Parity Err*/
-								/* Bit	7.. 2:	reserved */
-#define RI_RST_CLR		BIT_1S	/* Clear RAM Interface Reset */
-#define RI_RST_SET		BIT_0S	/* Set   RAM Interface Reset */
-
-/*	B3_RI_TEST		 8 bit	RAM Iface Test Register */
-								/* Bit 15.. 4:	reserved */
-#define RI_T_EV			BIT_3S	/* Timeout Event occured */
-#define RI_T_ON			BIT_2S	/* Timeout Timer Test On */
-#define RI_T_OFF		BIT_1S	/* Timeout Timer Test Off */
-#define RI_T_STEP		BIT_0S	/* Timeout Timer Step */
-
-/* MAC Arbiter Registers */
-/*	B3_MA_TO_CTRL	16 bit	MAC Arbiter Timeout Ctrl Reg */
-								/* Bit 15.. 4:	reserved */
-#define MA_FOE_ON		BIT_3S	/* XMAC Fast Output Enable ON */
-#define MA_FOE_OFF		BIT_2S	/* XMAC Fast Output Enable OFF */
-#define MA_RST_CLR		BIT_1S	/* Clear MAC Arbiter Reset */
-#define MA_RST_SET		BIT_0S	/* Set   MAC Arbiter Reset */
-
-/*	B3_MA_RC_CTRL	16 bit	MAC Arbiter Recovery Ctrl Reg */
-								/* Bit 15.. 8:	reserved */
-#define MA_ENA_REC_TX2	BIT_7S	/* Enable  Recovery Timer TX2 */
-#define MA_DIS_REC_TX2	BIT_6S	/* Disable Recovery Timer TX2 */
-#define MA_ENA_REC_TX1	BIT_5S	/* Enable  Recovery Timer TX1 */
-#define MA_DIS_REC_TX1	BIT_4S	/* Disable Recovery Timer TX1 */
-#define MA_ENA_REC_RX2	BIT_3S	/* Enable  Recovery Timer RX2 */
-#define MA_DIS_REC_RX2	BIT_2S	/* Disable Recovery Timer RX2 */
-#define MA_ENA_REC_RX1	BIT_1S	/* Enable  Recovery Timer RX1 */
-#define MA_DIS_REC_RX1	BIT_0S	/* Disable Recovery Timer RX1 */
-
-/* Packet Arbiter Registers */
-/*	B3_PA_CTRL		16 bit	Packet Arbiter Ctrl Register */
-								/* Bit 15..14:	reserved */
-#define PA_CLR_TO_TX2	BIT_13S	/* Clear IRQ Packet Timeout TX2 */
-#define PA_CLR_TO_TX1	BIT_12S	/* Clear IRQ Packet Timeout TX1 */
-#define PA_CLR_TO_RX2	BIT_11S	/* Clear IRQ Packet Timeout RX2 */
-#define PA_CLR_TO_RX1	BIT_10S	/* Clear IRQ Packet Timeout RX1 */
-#define PA_ENA_TO_TX2	BIT_9S	/* Enable  Timeout Timer TX2 */
-#define PA_DIS_TO_TX2	BIT_8S	/* Disable Timeout Timer TX2 */
-#define PA_ENA_TO_TX1	BIT_7S	/* Enable  Timeout Timer TX1 */
-#define PA_DIS_TO_TX1	BIT_6S	/* Disable Timeout Timer TX1 */
-#define PA_ENA_TO_RX2	BIT_5S	/* Enable  Timeout Timer RX2 */
-#define PA_DIS_TO_RX2	BIT_4S	/* Disable Timeout Timer RX2 */
-#define PA_ENA_TO_RX1	BIT_3S	/* Enable  Timeout Timer RX1 */
-#define PA_DIS_TO_RX1	BIT_2S	/* Disable Timeout Timer RX1 */
-#define PA_RST_CLR		BIT_1S	/* Clear MAC Arbiter Reset */
-#define PA_RST_SET		BIT_0S	/* Set   MAC Arbiter Reset */
-
-#define PA_ENA_TO_ALL	(PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\
-						PA_ENA_TO_TX1 | PA_ENA_TO_TX2)
-
-/* Rx/Tx Path related Arbiter Test Registers */
-/*	B3_MA_TO_TEST	16 bit	MAC Arbiter Timeout Test Reg */
-/*	B3_MA_RC_TEST	16 bit	MAC Arbiter Recovery Test Reg */
-/*	B3_PA_TEST		16 bit	Packet Arbiter Test Register */
-/*			Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */
-#define TX2_T_EV	BIT_15S		/* TX2 Timeout/Recv Event occured */
-#define TX2_T_ON	BIT_14S		/* TX2 Timeout/Recv Timer Test On */
-#define TX2_T_OFF	BIT_13S		/* TX2 Timeout/Recv Timer Tst Off */
-#define TX2_T_STEP	BIT_12S		/* TX2 Timeout/Recv Timer Step */
-#define TX1_T_EV	BIT_11S		/* TX1 Timeout/Recv Event occured */
-#define TX1_T_ON	BIT_10S		/* TX1 Timeout/Recv Timer Test On */
-#define TX1_T_OFF	BIT_9S		/* TX1 Timeout/Recv Timer Tst Off */
-#define TX1_T_STEP	BIT_8S		/* TX1 Timeout/Recv Timer Step */
-#define RX2_T_EV	BIT_7S		/* RX2 Timeout/Recv Event occured */
-#define RX2_T_ON	BIT_6S		/* RX2 Timeout/Recv Timer Test On */
-#define RX2_T_OFF	BIT_5S		/* RX2 Timeout/Recv Timer Tst Off */
-#define RX2_T_STEP	BIT_4S		/* RX2 Timeout/Recv Timer Step */
-#define RX1_T_EV	BIT_3S		/* RX1 Timeout/Recv Event occured */
-#define RX1_T_ON	BIT_2S		/* RX1 Timeout/Recv Timer Test On */
-#define RX1_T_OFF	BIT_1S		/* RX1 Timeout/Recv Timer Tst Off */
-#define RX1_T_STEP	BIT_0S		/* RX1 Timeout/Recv Timer Step */
-
-
-/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
-/*	TXA_ITI_INI		32 bit	Tx Arb Interval Timer Init Val */
-/*	TXA_ITI_VAL		32 bit	Tx Arb Interval Timer Value */
-/*	TXA_LIM_INI		32 bit	Tx Arb Limit Counter Init Val */
-/*	TXA_LIM_VAL		32 bit	Tx Arb Limit Counter Value */
-								/* Bit 31..24:	reserved */
-#define TXA_MAX_VAL	0x00ffffffUL/* Bit 23.. 0:	Max TXA Timer/Cnt Val */
-
-/*	TXA_CTRL		 8 bit	Tx Arbiter Control Register */
-#define TXA_ENA_FSYNC	BIT_7S	/* Enable  force of sync Tx queue */
-#define TXA_DIS_FSYNC	BIT_6S	/* Disable force of sync Tx queue */
-#define TXA_ENA_ALLOC	BIT_5S	/* Enable  alloc of free bandwidth */
-#define TXA_DIS_ALLOC	BIT_4S	/* Disable alloc of free bandwidth */
-#define TXA_START_RC	BIT_3S	/* Start sync Rate Control */
-#define TXA_STOP_RC		BIT_2S	/* Stop  sync Rate Control */
-#define TXA_ENA_ARB		BIT_1S	/* Enable  Tx Arbiter */
-#define TXA_DIS_ARB		BIT_0S	/* Disable Tx Arbiter */
-
-/*	TXA_TEST		 8 bit	Tx Arbiter Test Register */
-								/* Bit 7.. 6:	reserved */
-#define TXA_INT_T_ON	BIT_5S	/* Tx Arb Interval Timer Test On */
-#define TXA_INT_T_OFF	BIT_4S	/* Tx Arb Interval Timer Test Off */
-#define TXA_INT_T_STEP	BIT_3S	/* Tx Arb Interval Timer Step */
-#define TXA_LIM_T_ON	BIT_2S	/* Tx Arb Limit Timer Test On */
-#define TXA_LIM_T_OFF	BIT_1S	/* Tx Arb Limit Timer Test Off */
-#define TXA_LIM_T_STEP	BIT_0S	/* Tx Arb Limit Timer Step */
-
-/*	TXA_STAT		 8 bit	Tx Arbiter Status Register */
-								/* Bit 7.. 1:	reserved */
-#define TXA_PRIO_XS		BIT_0S	/* sync queue has prio to send */
-
-/*	Q_BC			32 bit	Current Byte Counter */
-								/* Bit 31..16:	reserved */
-#define BC_MAX			0xffff	/* Bit 15.. 0:	Byte counter */
-
-/* BMU Control Status Registers */
-/*	B0_R1_CSR		32 bit	BMU Ctrl/Stat Rx Queue 1 */
-/*	B0_R2_CSR		32 bit	BMU Ctrl/Stat Rx Queue 2 */
-/*	B0_XA1_CSR		32 bit	BMU Ctrl/Stat Sync Tx Queue 1 */
-/*	B0_XS1_CSR		32 bit	BMU Ctrl/Stat Async Tx Queue 1 */
-/*	B0_XA2_CSR		32 bit	BMU Ctrl/Stat Sync Tx Queue 2 */
-/*	B0_XS2_CSR		32 bit	BMU Ctrl/Stat Async Tx Queue 2 */
-/*	Q_CSR			32 bit	BMU Control/Status Register */
-								/* Bit 31..25:	reserved */
-#define CSR_SV_IDLE		BIT_24		/* BMU SM Idle */
-								/* Bit 23..22:	reserved */
-#define CSR_DESC_CLR	BIT_21		/* Clear Reset for Descr */
-#define CSR_DESC_SET	BIT_20		/* Set   Reset for Descr */
-#define CSR_FIFO_CLR	BIT_19		/* Clear Reset for FIFO */
-#define CSR_FIFO_SET	BIT_18		/* Set   Reset for FIFO */
-#define CSR_HPI_RUN		BIT_17		/* Release HPI SM */
-#define CSR_HPI_RST		BIT_16		/* Reset   HPI SM to Idle */
-#define CSR_SV_RUN		BIT_15		/* Release Supervisor SM */
-#define CSR_SV_RST		BIT_14		/* Reset   Supervisor SM */
-#define CSR_DREAD_RUN	BIT_13		/* Release Descr Read SM */
-#define CSR_DREAD_RST	BIT_12		/* Reset   Descr Read SM */
-#define CSR_DWRITE_RUN	BIT_11		/* Release Descr Write SM */
-#define CSR_DWRITE_RST	BIT_10		/* Reset   Descr Write SM */
-#define CSR_TRANS_RUN	BIT_9		/* Release Transfer SM */
-#define CSR_TRANS_RST	BIT_8		/* Reset   Transfer SM */
-#define CSR_ENA_POL		BIT_7		/* Enable  Descr Polling */
-#define CSR_DIS_POL		BIT_6		/* Disable Descr Polling */
-#define CSR_STOP		BIT_5		/* Stop  Rx/Tx Queue */
-#define CSR_START		BIT_4		/* Start Rx/Tx Queue */
-#define CSR_IRQ_CL_P	BIT_3		/* (Rx)	Clear Parity IRQ */
-#define CSR_IRQ_CL_B	BIT_2		/* Clear EOB IRQ */
-#define CSR_IRQ_CL_F	BIT_1		/* Clear EOF IRQ */
-#define CSR_IRQ_CL_C	BIT_0		/* Clear ERR IRQ */
-
-#define CSR_SET_RESET	(CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\
-						CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\
-						CSR_TRANS_RST)
-#define CSR_CLR_RESET	(CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\
-						CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\
-						CSR_TRANS_RUN)
-
-/*	Q_F				32 bit	Flag Register */
-									/* Bit 31..28:	reserved */
-#define F_ALM_FULL		BIT_27		/* Rx FIFO: almost full */
-#define F_EMPTY			BIT_27		/* Tx FIFO: empty flag */
-#define F_FIFO_EOF		BIT_26		/* Tag (EOF Flag) bit in FIFO */
-#define F_WM_REACHED	BIT_25		/* Watermark reached */
-									/* reserved */
-#define F_FIFO_LEVEL	(0x1fL<<16)	/* Bit 23..16:	# of Qwords in FIFO */
-									/* Bit 15..11: 	reserved */
-#define F_WATER_MARK	0x0007ffL	/* Bit 10.. 0:	Watermark */
-
-/*	Q_T1			32 bit	Test Register 1 */
-/*		Holds four State Machine control Bytes */
-#define SM_CTRL_SV_MSK	(0xffL<<24)	/* Bit 31..24:	Control Supervisor SM */
-#define SM_CTRL_RD_MSK	(0xffL<<16)	/* Bit 23..16:	Control Read Desc SM */
-#define SM_CTRL_WR_MSK	(0xffL<<8)	/* Bit 15.. 8:	Control Write Desc SM */
-#define SM_CTRL_TR_MSK	0xffL		/* Bit	7.. 0:	Control Transfer SM */
-
-/*	Q_T1_TR			 8 bit	Test Register 1 Transfer SM */
-/*	Q_T1_WR			 8 bit	Test Register 1 Write Descriptor SM */
-/*	Q_T1_RD			 8 bit	Test Register 1 Read Descriptor SM */
-/*	Q_T1_SV			 8 bit	Test Register 1 Supervisor SM */
-
-/* The control status byte of each machine looks like ... */
-#define SM_STATE		0xf0	/* Bit 7.. 4:	State which shall be loaded */
-#define SM_LOAD			BIT_3S	/* Load the SM with SM_STATE */
-#define SM_TEST_ON		BIT_2S	/* Switch on SM Test Mode */
-#define SM_TEST_OFF		BIT_1S	/* Go off the Test Mode */
-#define SM_STEP			BIT_0S	/* Step the State Machine */
-/* The encoding of the states is not supported by the Diagnostics Tool */
-
-/*	Q_T2			32 bit	Test Register 2	*/
-								/* Bit 31.. 8:	reserved */
-#define T2_AC_T_ON		BIT_7	/* Address Counter Test Mode on */
-#define T2_AC_T_OFF		BIT_6	/* Address Counter Test Mode off */
-#define T2_BC_T_ON		BIT_5	/* Byte Counter Test Mode on */
-#define T2_BC_T_OFF		BIT_4	/* Byte Counter Test Mode off */
-#define T2_STEP04		BIT_3	/* Inc AC/Dec BC by 4 */
-#define T2_STEP03		BIT_2	/* Inc AC/Dec BC by 3 */
-#define T2_STEP02		BIT_1	/* Inc AC/Dec BC by 2 */
-#define T2_STEP01		BIT_0	/* Inc AC/Dec BC by 1 */
-
-/*	Q_T3			32 bit	Test Register 3	*/
-								/* Bit 31.. 7:	reserved */
-#define T3_MUX_MSK		(7<<4)	/* Bit  6.. 4:	Mux Position */
-								/* Bit  3:	reserved */
-#define T3_VRAM_MSK		7		/* Bit  2.. 0:	Virtual RAM Buffer Address */
-
-/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
-/*	RB_START		32 bit	RAM Buffer Start Address */
-/*	RB_END			32 bit	RAM Buffer End Address */
-/*	RB_WP			32 bit	RAM Buffer Write Pointer */
-/*	RB_RP			32 bit	RAM Buffer Read Pointer */
-/*	RB_RX_UTPP		32 bit	Rx Upper Threshold, Pause Pack */
-/*	RB_RX_LTPP		32 bit	Rx Lower Threshold, Pause Pack */
-/*	RB_RX_UTHP		32 bit	Rx Upper Threshold, High Prio */
-/*	RB_RX_LTHP		32 bit	Rx Lower Threshold, High Prio */
-/*	RB_PC			32 bit	RAM Buffer Packet Counter */
-/*	RB_LEV			32 bit	RAM Buffer Level Register */
-				/* Bit 31..19:	reserved */
-#define RB_MSK	0x0007ffff	/* Bit 18.. 0:	RAM Buffer Pointer Bits */
-
-/*	RB_TST2			 8 bit	RAM Buffer Test Register 2 */
-								/* Bit 7.. 4:	reserved */
-#define RB_PC_DEC		BIT_3S	/* Packet Counter Decrem */
-#define RB_PC_T_ON		BIT_2S	/* Packet Counter Test On */
-#define RB_PC_T_OFF		BIT_1S	/* Packet Counter Tst Off */
-#define RB_PC_INC		BIT_0S	/* Packet Counter Increm */
-
-/*	RB_TST1			 8 bit	RAM Buffer Test Register 1 */
-							/* Bit 7:	reserved */
-#define RB_WP_T_ON		BIT_6S	/* Write Pointer Test On */
-#define RB_WP_T_OFF		BIT_5S	/* Write Pointer Test Off */
-#define RB_WP_INC		BIT_4S	/* Write Pointer Increm */
-								/* Bit 3:	reserved */
-#define RB_RP_T_ON		BIT_2S	/* Read Pointer Test On */
-#define RB_RP_T_OFF		BIT_1S	/* Read Pointer Test Off */
-#define RB_RP_DEC		BIT_0S	/* Read Pointer Decrement */
-
-/*	RB_CTRL			 8 bit	RAM Buffer Control Register */
-								/* Bit 7.. 6:	reserved */
-#define RB_ENA_STFWD	BIT_5S	/* Enable  Store & Forward */
-#define RB_DIS_STFWD	BIT_4S	/* Disable Store & Forward */
-#define RB_ENA_OP_MD	BIT_3S	/* Enable  Operation Mode */
-#define RB_DIS_OP_MD	BIT_2S	/* Disable Operation Mode */
-#define RB_RST_CLR		BIT_1S	/* Clear RAM Buf STM Reset */
-#define RB_RST_SET		BIT_0S	/* Set   RAM Buf STM Reset */
-
-
-/* Receive and Transmit MAC FIFO Registers (GENESIS only) */
-
-/*	RX_MFF_EA		32 bit	Receive MAC FIFO End Address */
-/*	RX_MFF_WP		32 bit 	Receive MAC FIFO Write Pointer */
-/*	RX_MFF_RP		32 bit	Receive MAC FIFO Read Pointer */
-/*	RX_MFF_PC		32 bit	Receive MAC FIFO Packet Counter */
-/*	RX_MFF_LEV		32 bit	Receive MAC FIFO Level */
-/*	TX_MFF_EA		32 bit	Transmit MAC FIFO End Address */
-/*	TX_MFF_WP		32 bit 	Transmit MAC FIFO Write Pointer */
-/*	TX_MFF_WSP		32 bit	Transmit MAC FIFO WR Shadow Pointer */
-/*	TX_MFF_RP		32 bit	Transmit MAC FIFO Read Pointer */
-/*	TX_MFF_PC		32 bit	Transmit MAC FIFO Packet Cnt */
-/*	TX_MFF_LEV		32 bit	Transmit MAC FIFO Level */
-								/* Bit 31.. 6:	reserved */
-#define MFF_MSK			0x007fL	/* Bit	5.. 0:	MAC FIFO Address/Ptr Bits */
-
-/*	RX_MFF_CTRL1	16 bit	Receive MAC FIFO Control Reg 1 */
-								/* Bit 15..14:	reserved */
-#define MFF_ENA_RDY_PAT	BIT_13S		/* Enable  Ready Patch */
-#define MFF_DIS_RDY_PAT	BIT_12S		/* Disable Ready Patch */
-#define MFF_ENA_TIM_PAT	BIT_11S		/* Enable  Timing Patch */
-#define MFF_DIS_TIM_PAT	BIT_10S		/* Disable Timing Patch */
-#define MFF_ENA_ALM_FUL	BIT_9S		/* Enable  AlmostFull Sign */
-#define MFF_DIS_ALM_FUL	BIT_8S		/* Disable AlmostFull Sign */
-#define MFF_ENA_PAUSE	BIT_7S		/* Enable  Pause Signaling */
-#define MFF_DIS_PAUSE	BIT_6S		/* Disable Pause Signaling */
-#define MFF_ENA_FLUSH	BIT_5S		/* Enable  Frame Flushing */
-#define MFF_DIS_FLUSH	BIT_4S		/* Disable Frame Flushing */
-#define MFF_ENA_TIST	BIT_3S		/* Enable  Time Stamp Gener */
-#define MFF_DIS_TIST	BIT_2S		/* Disable Time Stamp Gener */
-#define MFF_CLR_INTIST	BIT_1S		/* Clear IRQ No Time Stamp */
-#define MFF_CLR_INSTAT	BIT_0S		/* Clear IRQ No Status */
-
-#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT
-
-/*	TX_MFF_CTRL1	16 bit	Transmit MAC FIFO Control Reg 1 */
-#define MFF_CLR_PERR	BIT_15S		/* Clear Parity Error IRQ */
-								/* Bit 14:	reserved */
-#define MFF_ENA_PKT_REC	BIT_13S		/* Enable  Packet Recovery */
-#define MFF_DIS_PKT_REC BIT_12S		/* Disable Packet Recovery */
-/*	MFF_ENA_TIM_PAT	 (see RX_MFF_CTRL1) Bit 11:	Enable  Timing Patch */
-/*	MFF_DIS_TIM_PAT	 (see RX_MFF_CTRL1) Bit 10:	Disable Timing Patch */
-/*	MFF_ENA_ALM_FUL	 (see RX_MFF_CTRL1) Bit	 9:	Enable  Almost Full Sign */
-/*	MFF_DIS_ALM_FUL	 (see RX_MFF_CTRL1) Bit	 8:	Disable Almost Full Sign */
-#define MFF_ENA_W4E		BIT_7S		/* Enable  Wait for Empty */
-#define MFF_DIS_W4E		BIT_6S		/* Disable Wait for Empty */
-/*	MFF_ENA_FLUSH	 (see RX_MFF_CTRL1) Bit	 5:	Enable  Frame Flushing */
-/*	MFF_DIS_FLUSH	 (see RX_MFF_CTRL1) Bit	 4:	Disable Frame Flushing */
-#define MFF_ENA_LOOPB	BIT_3S		/* Enable  Loopback */
-#define MFF_DIS_LOOPB	BIT_2S		/* Disable Loopback */
-#define MFF_CLR_MAC_RST	BIT_1S		/* Clear XMAC Reset */
-#define MFF_SET_MAC_RST	BIT_0S		/* Set   XMAC Reset */
-
-#define MFF_TX_CTRL_DEF	(MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH)
-
-/*	RX_MFF_TST2	 	 8 bit	Receive MAC FIFO Test Register 2 */
-/*	TX_MFF_TST2	 	 8 bit	Transmit MAC FIFO Test Register 2 */
-								/* Bit 7:	reserved */
-#define MFF_WSP_T_ON	BIT_6S	/* Tx: Write Shadow Ptr TestOn */
-#define MFF_WSP_T_OFF	BIT_5S	/* Tx: Write Shadow Ptr TstOff */
-#define MFF_WSP_INC		BIT_4S	/* Tx: Write Shadow Ptr Increment */
-#define MFF_PC_DEC		BIT_3S	/* Packet Counter Decrement */
-#define MFF_PC_T_ON		BIT_2S	/* Packet Counter Test On */
-#define MFF_PC_T_OFF	BIT_1S	/* Packet Counter Test Off */
-#define MFF_PC_INC		BIT_0S	/* Packet Counter Increment */
-
-/*	RX_MFF_TST1	 	 8 bit	Receive MAC FIFO Test Register 1 */
-/*	TX_MFF_TST1	 	 8 bit	Transmit MAC FIFO Test Register 1 */
-					/* Bit 7:	reserved */
-#define MFF_WP_T_ON		BIT_6S	/* Write Pointer Test On */
-#define MFF_WP_T_OFF	BIT_5S	/* Write Pointer Test Off */
-#define MFF_WP_INC		BIT_4S	/* Write Pointer Increm */
-							/* Bit 3:	reserved */
-#define MFF_RP_T_ON		BIT_2S	/* Read Pointer Test On */
-#define MFF_RP_T_OFF	BIT_1S	/* Read Pointer Test Off */
-#define MFF_RP_DEC		BIT_0S	/* Read Pointer Decrement */
-
-/*	RX_MFF_CTRL2	 8 bit	Receive MAC FIFO Control Reg 2 */
-/*	TX_MFF_CTRL2	 8 bit	Transmit MAC FIFO Control Reg 2 */
-								/* Bit 7..4:	reserved */
-#define MFF_ENA_OP_MD	BIT_3S	/* Enable  Operation Mode */
-#define MFF_DIS_OP_MD	BIT_2S	/* Disable Operation Mode */
-#define MFF_RST_CLR		BIT_1S	/* Clear MAC FIFO Reset */
-#define MFF_RST_SET		BIT_0S	/* Set   MAC FIFO Reset */
-
-
-/*	Link LED Counter Registers (GENESIS only) */
-
-/*	RX_LED_CTRL		 8 bit	Receive LED Cnt Control Reg */
-/*	TX_LED_CTRL		 8 bit	Transmit LED Cnt Control Reg */
-/*	LNK_SYNC_CTRL	 8 bit	Link Sync Cnt Control Register */
-							/* Bit 7.. 3:	reserved */
-#define LED_START		BIT_2S	/* Start Timer */
-#define LED_STOP		BIT_1S	/* Stop Timer */
-#define LED_STATE		BIT_0S	/* Rx/Tx: LED State, 1=LED on */
-#define LED_CLR_IRQ		BIT_0S	/* Lnk: 	Clear Link IRQ */
-
-/*	RX_LED_TST		 8 bit	Receive LED Cnt Test Register */
-/*	TX_LED_TST		 8 bit	Transmit LED Cnt Test Register */
-/*	LNK_SYNC_TST	 8 bit	Link Sync Cnt Test Register */
-							/* Bit 7.. 3:	reserved */
-#define LED_T_ON		BIT_2S	/* LED Counter Test mode On */
-#define LED_T_OFF		BIT_1S	/* LED Counter Test mode Off */
-#define LED_T_STEP		BIT_0S	/* LED Counter Step */
-
-/*	LNK_LED_REG	 	 8 bit	Link LED Register */
-								/* Bit 7.. 6:	reserved */
-#define LED_BLK_ON		BIT_5S	/* Link LED Blinking On */
-#define LED_BLK_OFF		BIT_4S	/* Link LED Blinking Off */
-#define LED_SYNC_ON		BIT_3S	/* Use Sync Wire to switch LED */
-#define LED_SYNC_OFF	BIT_2S	/* Disable Sync Wire Input */
-#define LED_ON			BIT_1S	/* switch LED on */
-#define LED_OFF			BIT_0S	/* switch LED off */
-
-/*	Receive and Transmit GMAC FIFO Registers (YUKON only) */
-
-/*	RX_GMF_EA		32 bit	Rx GMAC FIFO End Address */
-/*	RX_GMF_AF_THR	32 bit	Rx GMAC FIFO Almost Full Thresh. */
-/*	RX_GMF_WP		32 bit 	Rx GMAC FIFO Write Pointer */
-/*	RX_GMF_WLEV		32 bit 	Rx GMAC FIFO Write Level */
-/*	RX_GMF_RP		32 bit 	Rx GMAC FIFO Read Pointer */
-/*	RX_GMF_RLEV		32 bit 	Rx GMAC FIFO Read Level */
-/*	TX_GMF_EA		32 bit	Tx GMAC FIFO End Address */
-/*	TX_GMF_AE_THR	32 bit	Tx GMAC FIFO Almost Empty Thresh.*/
-/*	TX_GMF_WP		32 bit 	Tx GMAC FIFO Write Pointer */
-/*	TX_GMF_WSP		32 bit 	Tx GMAC FIFO Write Shadow Ptr. */
-/*	TX_GMF_WLEV		32 bit 	Tx GMAC FIFO Write Level */
-/*	TX_GMF_RP		32 bit 	Tx GMAC FIFO Read Pointer */
-/*	TX_GMF_RSTP		32 bit 	Tx GMAC FIFO Restart Pointer */
-/*	TX_GMF_RLEV		32 bit 	Tx GMAC FIFO Read Level */
-
-/*	RX_GMF_CTRL_T	32 bit	Rx GMAC FIFO Control/Test */
-						/* Bits 31..15:	reserved */
-#define GMF_WP_TST_ON	BIT_14		/* Write Pointer Test On */
-#define GMF_WP_TST_OFF	BIT_13		/* Write Pointer Test Off */
-#define GMF_WP_STEP		BIT_12		/* Write Pointer Step/Increment */
-						/* Bit 11:	reserved */
-#define GMF_RP_TST_ON	BIT_10		/* Read Pointer Test On */
-#define GMF_RP_TST_OFF	BIT_9		/* Read Pointer Test Off */
-#define GMF_RP_STEP		BIT_8		/* Read Pointer Step/Increment */
-#define GMF_RX_F_FL_ON	BIT_7		/* Rx FIFO Flush Mode On */
-#define GMF_RX_F_FL_OFF	BIT_6		/* Rx FIFO Flush Mode Off */
-#define GMF_CLI_RX_FO	BIT_5		/* Clear IRQ Rx FIFO Overrun */
-#define GMF_CLI_RX_FC	BIT_4		/* Clear IRQ Rx Frame Complete */
-#define GMF_OPER_ON		BIT_3		/* Operational Mode On */
-#define GMF_OPER_OFF	BIT_2		/* Operational Mode Off */
-#define GMF_RST_CLR		BIT_1		/* Clear GMAC FIFO Reset */
-#define GMF_RST_SET		BIT_0		/* Set   GMAC FIFO Reset */
-
-/*	TX_GMF_CTRL_T	32 bit	Tx GMAC FIFO Control/Test */
-						/* Bits 31..19:	reserved */
-#define GMF_WSP_TST_ON	BIT_18		/* Write Shadow Pointer Test On */
-#define GMF_WSP_TST_OFF	BIT_17		/* Write Shadow Pointer Test Off */
-#define GMF_WSP_STEP	BIT_16		/* Write Shadow Pointer Step/Increment */
-						/* Bits 15..7: same as for RX_GMF_CTRL_T */
-#define GMF_CLI_TX_FU	BIT_6		/* Clear IRQ Tx FIFO Underrun */
-#define GMF_CLI_TX_FC	BIT_5		/* Clear IRQ Tx Frame Complete */
-#define GMF_CLI_TX_PE	BIT_4		/* Clear IRQ Tx Parity Error */
-						/* Bits 3..0: same as for RX_GMF_CTRL_T */
-
-#define GMF_RX_CTRL_DEF		(GMF_OPER_ON | GMF_RX_F_FL_ON)
-#define GMF_TX_CTRL_DEF		GMF_OPER_ON
-
-#define RX_GMF_FL_THR_DEF	0x0a	/* Rx GMAC FIFO Flush Threshold default */
-
-/*	GMAC_TI_ST_CTRL	 8 bit	Time Stamp Timer Ctrl Reg (YUKON only) */
-								/* Bit 7.. 3:	reserved */
-#define GMT_ST_START	BIT_2S		/* Start Time Stamp Timer */
-#define GMT_ST_STOP		BIT_1S		/* Stop  Time Stamp Timer */
-#define GMT_ST_CLR_IRQ	BIT_0S		/* Clear Time Stamp Timer IRQ */
-
-/*	GMAC_CTRL		32 bit	GMAC Control Reg (YUKON only) */
-						/* Bits 31.. 8:	reserved */
-#define GMC_H_BURST_ON	BIT_7		/* Half Duplex Burst Mode On */
-#define GMC_H_BURST_OFF	BIT_6		/* Half Duplex Burst Mode Off */
-#define GMC_F_LOOPB_ON	BIT_5		/* FIFO Loopback On */
-#define GMC_F_LOOPB_OFF	BIT_4		/* FIFO Loopback Off */
-#define GMC_PAUSE_ON	BIT_3		/* Pause On */
-#define GMC_PAUSE_OFF	BIT_2		/* Pause Off */
-#define GMC_RST_CLR		BIT_1		/* Clear GMAC Reset */
-#define GMC_RST_SET		BIT_0		/* Set   GMAC Reset */
-
-/*	GPHY_CTRL		32 bit	GPHY Control Reg (YUKON only) */
-						/* Bits 31..29:	reserved */
-#define GPC_SEL_BDT		BIT_28	/* Select Bi-Dir. Transfer for MDC/MDIO */
-#define GPC_INT_POL_HI	BIT_27	/* IRQ Polarity is Active HIGH */
-#define GPC_75_OHM		BIT_26	/* Use 75 Ohm Termination instead of 50 */
-#define GPC_DIS_FC		BIT_25	/* Disable Automatic Fiber/Copper Detection */
-#define GPC_DIS_SLEEP	BIT_24	/* Disable Energy Detect */
-#define GPC_HWCFG_M_3	BIT_23	/* HWCFG_MODE[3] */
-#define GPC_HWCFG_M_2	BIT_22	/* HWCFG_MODE[2] */
-#define GPC_HWCFG_M_1	BIT_21	/* HWCFG_MODE[1] */
-#define GPC_HWCFG_M_0	BIT_20	/* HWCFG_MODE[0] */
-#define GPC_ANEG_0		BIT_19	/* ANEG[0] */
-#define GPC_ENA_XC		BIT_18	/* Enable MDI crossover */
-#define GPC_DIS_125		BIT_17	/* Disable 125 MHz clock */
-#define GPC_ANEG_3		BIT_16	/* ANEG[3] */
-#define GPC_ANEG_2		BIT_15	/* ANEG[2] */
-#define GPC_ANEG_1		BIT_14	/* ANEG[1] */
-#define GPC_ENA_PAUSE	BIT_13	/* Enable Pause (SYM_OR_REM) */
-#define GPC_PHYADDR_4	BIT_12	/* Bit 4 of Phy Addr */
-#define GPC_PHYADDR_3	BIT_11	/* Bit 3 of Phy Addr */
-#define GPC_PHYADDR_2	BIT_10	/* Bit 2 of Phy Addr */
-#define GPC_PHYADDR_1	BIT_9	/* Bit 1 of Phy Addr */
-#define GPC_PHYADDR_0	BIT_8	/* Bit 0 of Phy Addr */
-						/* Bits  7..2:	reserved */
-#define GPC_RST_CLR		BIT_1	/* Clear GPHY Reset */
-#define GPC_RST_SET		BIT_0	/* Set   GPHY Reset */
-
-#define GPC_HWCFG_GMII_COP	(GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \
-							 GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
-
-#define GPC_HWCFG_GMII_FIB	(				 GPC_HWCFG_M_2 | \
-							 GPC_HWCFG_M_1 | GPC_HWCFG_M_0)
-
-#define GPC_ANEG_ADV_ALL_M	(GPC_ANEG_3 | GPC_ANEG_2 | \
-							 GPC_ANEG_1 | GPC_ANEG_0)
-
-/* forced speed and duplex mode (don't mix with other ANEG bits) */
-#define GPC_FRC10MBIT_HALF	0
-#define GPC_FRC10MBIT_FULL	GPC_ANEG_0
-#define GPC_FRC100MBIT_HALF	GPC_ANEG_1
-#define GPC_FRC100MBIT_FULL	(GPC_ANEG_0 | GPC_ANEG_1)
-
-/* auto-negotiation with limited advertised speeds */
-/* mix only with master/slave settings (for copper) */
-#define GPC_ADV_1000_HALF	GPC_ANEG_2
-#define GPC_ADV_1000_FULL	GPC_ANEG_3
-#define GPC_ADV_ALL			(GPC_ANEG_2 | GPC_ANEG_3)
-
-/* master/slave settings */
-/* only for copper with 1000 Mbps */
-#define GPC_FORCE_MASTER	0
-#define GPC_FORCE_SLAVE		GPC_ANEG_0
-#define GPC_PREF_MASTER		GPC_ANEG_1
-#define GPC_PREF_SLAVE		(GPC_ANEG_1 | GPC_ANEG_0)
-
-/*	GMAC_IRQ_SRC	 8 bit	GMAC Interrupt Source Reg (YUKON only) */
-/*	GMAC_IRQ_MSK	 8 bit	GMAC Interrupt Mask   Reg (YUKON only) */
-#define GM_IS_TX_CO_OV	BIT_5		/* Transmit Counter Overflow IRQ */
-#define GM_IS_RX_CO_OV	BIT_4		/* Receive Counter Overflow IRQ */
-#define GM_IS_TX_FF_UR	BIT_3		/* Transmit FIFO Underrun */
-#define GM_IS_TX_COMPL	BIT_2		/* Frame Transmission Complete */
-#define GM_IS_RX_FF_OR	BIT_1		/* Receive FIFO Overrun */
-#define GM_IS_RX_COMPL	BIT_0		/* Frame Reception Complete */
-
-#define GMAC_DEF_MSK	(GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \
-						GM_IS_TX_FF_UR)
-
-/*	GMAC_LINK_CTRL	16 bit	GMAC Link Control Reg (YUKON only) */
-						/* Bits 15.. 2:	reserved */
-#define GMLC_RST_CLR	BIT_1S		/* Clear GMAC Link Reset */
-#define GMLC_RST_SET	BIT_0S		/* Set   GMAC Link Reset */
-
-
-/*	WOL_CTRL_STAT	16 bit	WOL Control/Status Reg */
-#define WOL_CTL_LINK_CHG_OCC			BIT_15S
-#define WOL_CTL_MAGIC_PKT_OCC			BIT_14S
-#define WOL_CTL_PATTERN_OCC				BIT_13S
-
-#define WOL_CTL_CLEAR_RESULT			BIT_12S
-
-#define WOL_CTL_ENA_PME_ON_LINK_CHG		BIT_11S
-#define WOL_CTL_DIS_PME_ON_LINK_CHG		BIT_10S
-#define WOL_CTL_ENA_PME_ON_MAGIC_PKT	BIT_9S
-#define WOL_CTL_DIS_PME_ON_MAGIC_PKT	BIT_8S
-#define WOL_CTL_ENA_PME_ON_PATTERN		BIT_7S
-#define WOL_CTL_DIS_PME_ON_PATTERN		BIT_6S
-
-#define WOL_CTL_ENA_LINK_CHG_UNIT		BIT_5S
-#define WOL_CTL_DIS_LINK_CHG_UNIT		BIT_4S
-#define WOL_CTL_ENA_MAGIC_PKT_UNIT		BIT_3S
-#define WOL_CTL_DIS_MAGIC_PKT_UNIT		BIT_2S
-#define WOL_CTL_ENA_PATTERN_UNIT		BIT_1S
-#define WOL_CTL_DIS_PATTERN_UNIT		BIT_0S
-
-#define WOL_CTL_DEFAULT				\
-	(WOL_CTL_DIS_PME_ON_LINK_CHG |	\
-	WOL_CTL_DIS_PME_ON_PATTERN |	\
-	WOL_CTL_DIS_PME_ON_MAGIC_PKT |	\
-	WOL_CTL_DIS_LINK_CHG_UNIT |		\
-	WOL_CTL_DIS_PATTERN_UNIT |		\
-	WOL_CTL_DIS_MAGIC_PKT_UNIT)
-
-/*	WOL_MATCH_CTL	 8 bit	WOL Match Control Reg */
-#define WOL_CTL_PATT_ENA(x)				(BIT_0 << (x))
-
-#define SK_NUM_WOL_PATTERN		7
-#define SK_PATTERN_PER_WORD		4
-#define SK_BITMASK_PATTERN		7
-#define SK_POW_PATTERN_LENGTH	128
-
-#define WOL_LENGTH_MSK		0x7f
-#define WOL_LENGTH_SHIFT	8
-
-
-/* Receive and Transmit Descriptors ******************************************/
-
-/* Transmit Descriptor struct */
-typedef	struct s_HwTxd {
-	SK_U32 volatile	TxCtrl;	/* Transmit Buffer Control Field */
-	SK_U32	TxNext;			/* Physical Address Pointer to the next TxD */
-	SK_U32	TxAdrLo;		/* Physical Tx Buffer Address lower dword */
-	SK_U32	TxAdrHi;		/* Physical Tx Buffer Address upper dword */
-	SK_U32	TxStat;			/* Transmit Frame Status Word */
-#ifndef	SK_USE_REV_DESC
-	SK_U16	TxTcpOffs;		/* TCP Checksum Calculation Start Value */
-	SK_U16	TxRes1;			/* 16 bit reserved field */
-	SK_U16	TxTcpWp;		/* TCP Checksum Write Position */
-	SK_U16	TxTcpSp;		/* TCP Checksum Calculation Start Position */
-#else	/* SK_USE_REV_DESC */
-	SK_U16	TxRes1;			/* 16 bit reserved field */
-	SK_U16	TxTcpOffs;		/* TCP Checksum Calculation Start Value */
-	SK_U16	TxTcpSp;		/* TCP Checksum Calculation Start Position */
-	SK_U16	TxTcpWp;		/* TCP Checksum Write Position */
-#endif	/* SK_USE_REV_DESC */
-	SK_U32  TxRes2;			/* 32 bit reserved field */
-} SK_HWTXD;
-
-/* Receive Descriptor struct */
-typedef	struct s_HwRxd {
-	SK_U32 volatile RxCtrl;	/* Receive Buffer Control Field */
-	SK_U32	RxNext;			/* Physical Address Pointer to the next RxD */
-	SK_U32	RxAdrLo;		/* Physical Rx Buffer Address lower dword */
-	SK_U32	RxAdrHi;		/* Physical Rx Buffer Address upper dword */
-	SK_U32	RxStat;			/* Receive Frame Status Word */
-	SK_U32	RxTiSt;			/* Receive Time Stamp (from XMAC on GENESIS) */
-#ifndef	SK_USE_REV_DESC
-	SK_U16	RxTcpSum1;		/* TCP Checksum 1 */
-	SK_U16	RxTcpSum2;		/* TCP Checksum 2 */
-	SK_U16	RxTcpSp1;		/* TCP Checksum Calculation Start Position 1 */
-	SK_U16	RxTcpSp2;		/* TCP Checksum Calculation Start Position 2 */
-#else	/* SK_USE_REV_DESC */
-	SK_U16	RxTcpSum2;		/* TCP Checksum 2 */
-	SK_U16	RxTcpSum1;		/* TCP Checksum 1 */
-	SK_U16	RxTcpSp2;		/* TCP Checksum Calculation Start Position 2 */
-	SK_U16	RxTcpSp1;		/* TCP Checksum Calculation Start Position 1 */
-#endif	/* SK_USE_REV_DESC */
-} SK_HWRXD;
-
-/*
- * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2)
- * should set the define SK_USE_REV_DESC.
- * Structures are 'normaly' not endianess dependent. But in
- * this case the SK_U16 fields are bound to bit positions inside the
- * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord.
- * The bit positions inside a DWord are of course endianess dependent and
- * swaps if the DWord is swapped by the hardware.
- */
-
-
-/* Descriptor Bit Definition */
-/*	TxCtrl		Transmit Buffer Control Field */
-/*	RxCtrl		Receive  Buffer Control Field */
-#define BMU_OWN			BIT_31	/* OWN bit: 0=host/1=BMU */
-#define BMU_STF			BIT_30	/* Start of Frame */
-#define BMU_EOF			BIT_29	/* End of Frame */
-#define BMU_IRQ_EOB		BIT_28	/* Req "End of Buffer" IRQ */
-#define BMU_IRQ_EOF		BIT_27	/* Req "End of Frame" IRQ */
-/* TxCtrl specific bits */
-#define BMU_STFWD		BIT_26	/* (Tx)	Store & Forward Frame */
-#define BMU_NO_FCS		BIT_25	/* (Tx) Disable MAC FCS (CRC) generation */
-#define BMU_SW			BIT_24	/* (Tx)	1 bit res. for SW use */
-/* RxCtrl specific bits */
-#define BMU_DEV_0		BIT_26	/* (Rx)	Transfer data to Dev0 */
-#define BMU_STAT_VAL	BIT_25	/* (Rx)	Rx Status Valid */
-#define BMU_TIST_VAL	BIT_24	/* (Rx)	Rx TimeStamp Valid */
-								/* Bit 23..16:	BMU Check Opcodes */
-#define BMU_CHECK		(0x55L<<16)	/* Default BMU check */
-#define BMU_TCP_CHECK	(0x56L<<16)	/* Descr with TCP ext */
-#define BMU_UDP_CHECK	(0x57L<<16)	/* Descr with UDP ext (YUKON only) */
-#define BMU_BBC			0xffffL	/* Bit 15.. 0:	Buffer Byte Counter */
-
-/*	TxStat		Transmit Frame Status Word */
-/*	RxStat		Receive Frame Status Word */
-/*
- *Note: TxStat is reserved for ASIC loopback mode only
- *
- *	The Bits of the Status words are defined in xmac_ii.h
- *	(see XMR_FS bits)
- */
-
-/* macros ********************************************************************/
-
-/* Receive and Transmit Queues */
-#define Q_R1	0x0000		/* Receive Queue 1 */
-#define Q_R2	0x0080		/* Receive Queue 2 */
-#define Q_XS1	0x0200		/* Synchronous Transmit Queue 1 */
-#define Q_XA1	0x0280		/* Asynchronous Transmit Queue 1 */
-#define Q_XS2	0x0300		/* Synchronous Transmit Queue 2 */
-#define Q_XA2	0x0380		/* Asynchronous Transmit Queue 2 */
-
-/*
- *	Macro Q_ADDR()
- *
- *	Use this macro to access the Receive and Transmit Queue Registers.
- *
- * para:
- *	Queue	Queue to access.
- *				Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
- *	Offs	Queue register offset.
- *				Values: Q_D, Q_DA_L ... Q_T2, Q_T3
- *
- * usage	SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal)
- */
-#define Q_ADDR(Queue, Offs)	(B8_Q_REGS + (Queue) + (Offs))
-
-/*
- *	Macro RB_ADDR()
- *
- *	Use this macro to access the RAM Buffer Registers.
- *
- * para:
- *	Queue	Queue to access.
- *				Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2
- *	Offs	Queue register offset.
- *				Values: RB_START, RB_END ... RB_LEV, RB_CTRL
- *
- * usage	SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal)
- */
-#define RB_ADDR(Queue, Offs)	(B16_RAM_REGS + (Queue) + (Offs))
-
-
-/* MAC Related Registers */
-#define MAC_1		0	/* belongs to the port near the slot */
-#define MAC_2		1	/* belongs to the port far away from the slot */
-
-/*
- *	Macro MR_ADDR()
- *
- *	Use this macro to access a MAC Related Registers inside the ASIC.
- *
- * para:
- *	Mac		MAC to access.
- *				Values: MAC_1, MAC_2
- *	Offs	MAC register offset.
- *				Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG,
- *						TX_MFF_EA, TX_MFF_WP ... TX_LED_TST
- *
- * usage	SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal)
- */
-#define MR_ADDR(Mac, Offs)	(((Mac) << 7) + (Offs))
-
-#ifdef	SK_LITTLE_ENDIAN
-#define XM_WORD_LO	0
-#define XM_WORD_HI	1
-#else	/* !SK_LITTLE_ENDIAN */
-#define XM_WORD_LO	1
-#define XM_WORD_HI	0
-#endif	/* !SK_LITTLE_ENDIAN */
-
-
-/*
- * macros to access the XMAC (GENESIS only)
- *
- * XM_IN16(),		to read a 16 bit register (e.g. XM_MMU_CMD)
- * XM_OUT16(),		to write a 16 bit register (e.g. XM_MMU_CMD)
- * XM_IN32(),		to read a 32 bit register (e.g. XM_TX_EV_CNT)
- * XM_OUT32(),		to write a 32 bit register (e.g. XM_TX_EV_CNT)
- * XM_INADDR(),		to read a network address register (e.g. XM_SRC_CHK)
- * XM_OUTADDR(),	to write a network address register (e.g. XM_SRC_CHK)
- * XM_INHASH(),		to read the XM_HSM_CHK register
- * XM_OUTHASH()		to write the XM_HSM_CHK register
- *
- * para:
- *	Mac		XMAC to access		values: MAC_1 or MAC_2
- *	IoC		I/O context needed for SK I/O macros
- *	Reg		XMAC Register to read or write
- *	(p)Val	Value or pointer to the value which should be read or written
- *
- * usage:	XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value);
- */
-
-#define XMA(Mac, Reg)									\
-	((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1))
-
-#define XM_IN16(IoC, Mac, Reg, pVal)					\
-	SK_IN16((IoC), XMA((Mac), (Reg)), (pVal))
-
-#define XM_OUT16(IoC, Mac, Reg, Val)					\
-	SK_OUT16((IoC), XMA((Mac), (Reg)), (Val))
-
-#define XM_IN32(IoC, Mac, Reg, pVal) {					\
-	SK_IN16((IoC), XMA((Mac), (Reg)),					\
-		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]);		\
-	SK_IN16((IoC), XMA((Mac), (Reg+2)),					\
-		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]);		\
-}
-
-#define XM_OUT32(IoC, Mac, Reg, Val) {										\
-	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL));			\
-	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\
-}
-
-/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */
-
-#define XM_INADDR(IoC, Mac, Reg, pVal) {				\
-	SK_U16	Word;										\
-	SK_U8	*pByte;										\
-	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
-	SK_IN16((IoC), XMA((Mac), (Reg)), &Word);			\
-	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word);			\
-	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word);			\
-	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
-}
-
-#define XM_OUTADDR(IoC, Mac, Reg, pVal) {				\
-	SK_U8	SK_FAR *pByte;								\
-	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
-	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)			\
-		(((SK_U16)(pByte[0]) & 0x00ff) |				\
-		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)		\
-		(((SK_U16)(pByte[2]) & 0x00ff) |				\
-		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16)		\
-		(((SK_U16)(pByte[4]) & 0x00ff) |				\
-		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
-}
-
-#define XM_INHASH(IoC, Mac, Reg, pVal) {				\
-	SK_U16	Word;										\
-	SK_U8	SK_FAR *pByte;								\
-	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
-	SK_IN16((IoC), XMA((Mac), (Reg)), &Word);			\
-	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word);			\
-	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word);			\
-	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word);			\
-	pByte[6] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[7] = (SK_U8)((Word >> 8) & 0x00ff);			\
-}
-
-#define XM_OUTHASH(IoC, Mac, Reg, pVal) {				\
-	SK_U8	SK_FAR *pByte;								\
-	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
-	SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)			\
-		(((SK_U16)(pByte[0]) & 0x00ff)|					\
-		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)		\
-		(((SK_U16)(pByte[2]) & 0x00ff)|					\
-		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16)		\
-		(((SK_U16)(pByte[4]) & 0x00ff)|					\
-		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16)		\
-		(((SK_U16)(pByte[6]) & 0x00ff)|					\
-		(((SK_U16)(pByte[7]) << 8) & 0xff00)));			\
-}
-
-/*
- * macros to access the GMAC (YUKON only)
- *
- * GM_IN16(),		to read  a 16 bit register (e.g. GM_GP_STAT)
- * GM_OUT16(),		to write a 16 bit register (e.g. GM_GP_CTRL)
- * GM_IN32(),		to read  a 32 bit register (e.g. GM_)
- * GM_OUT32(),		to write a 32 bit register (e.g. GM_)
- * GM_INADDR(),		to read  a network address register (e.g. GM_SRC_ADDR_1L)
- * GM_OUTADDR(),	to write a network address register (e.g. GM_SRC_ADDR_2L)
- * GM_INHASH(),		to read  the GM_MC_ADDR_H1 register
- * GM_OUTHASH()		to write the GM_MC_ADDR_H1 register
- *
- * para:
- *	Mac		GMAC to access		values: MAC_1 or MAC_2
- *	IoC		I/O context needed for SK I/O macros
- *	Reg		GMAC Register to read or write
- *	(p)Val	Value or pointer to the value which should be read or written
- *
- * usage:	GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value);
- */
-
-#define GMA(Mac, Reg)									\
-	((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg))
-
-#define GM_IN16(IoC, Mac, Reg, pVal)					\
-	SK_IN16((IoC), GMA((Mac), (Reg)), (pVal))
-
-#define GM_OUT16(IoC, Mac, Reg, Val)					\
-	SK_OUT16((IoC), GMA((Mac), (Reg)), (Val))
-
-#define GM_IN32(IoC, Mac, Reg, pVal) {					\
-	SK_IN16((IoC), GMA((Mac), (Reg)),					\
-		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]);		\
-	SK_IN16((IoC), GMA((Mac), (Reg+4)),					\
-		(SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]);		\
-}
-
-#define GM_OUT32(IoC, Mac, Reg, Val) {										\
-	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL));			\
-	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\
-}
-
-#define GM_INADDR(IoC, Mac, Reg, pVal) {				\
-	SK_U16	Word;										\
-	SK_U8	*pByte;										\
-	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
-	SK_IN16((IoC), GMA((Mac), (Reg)), &Word);			\
-	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word);			\
-	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word);			\
-	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
-}
-
-#define GM_OUTADDR(IoC, Mac, Reg, pVal) {				\
-	SK_U8	SK_FAR *pByte;								\
-	pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0];	\
-	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)			\
-		(((SK_U16)(pByte[0]) & 0x00ff) |				\
-		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)		\
-		(((SK_U16)(pByte[2]) & 0x00ff) |				\
-		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16)		\
-		(((SK_U16)(pByte[4]) & 0x00ff) |				\
-		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
-}
-
-#define GM_INHASH(IoC, Mac, Reg, pVal) {				\
-	SK_U16	Word;										\
-	SK_U8	*pByte;										\
-	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
-	SK_IN16((IoC), GMA((Mac), (Reg)), &Word);			\
-	pByte[0] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[1] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word);			\
-	pByte[2] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[3] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word);			\
-	pByte[4] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[5] = (SK_U8)((Word >> 8) & 0x00ff);			\
-	SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word);		\
-	pByte[6] = (SK_U8)(Word  & 0x00ff);					\
-	pByte[7] = (SK_U8)((Word >> 8) & 0x00ff);			\
-}
-
-#define GM_OUTHASH(IoC, Mac, Reg, pVal) {				\
-	SK_U8	*pByte;										\
-	pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0];				\
-	SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)			\
-		(((SK_U16)(pByte[0]) & 0x00ff)|					\
-		(((SK_U16)(pByte[1]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)		\
-		(((SK_U16)(pByte[2]) & 0x00ff)|					\
-		(((SK_U16)(pByte[3]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16)		\
-		(((SK_U16)(pByte[4]) & 0x00ff)|					\
-		(((SK_U16)(pByte[5]) << 8) & 0xff00)));			\
-	SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16)		\
-		(((SK_U16)(pByte[6]) & 0x00ff)|					\
-		(((SK_U16)(pByte[7]) << 8) & 0xff00)));			\
-}
-
-/*
- * Different MAC Types
- */
-#define SK_MAC_XMAC		0	/* Xaqti XMAC II */
-#define SK_MAC_GMAC		1	/* Marvell GMAC */
-
-/*
- * Different PHY Types
- */
-#define SK_PHY_XMAC			0	/* integrated in XMAC II */
-#define SK_PHY_BCOM			1	/* Broadcom BCM5400 */
-#define SK_PHY_LONE			2	/* Level One LXT1000 */
-#define SK_PHY_NAT			3	/* National DP83891 */
-#define SK_PHY_MARV_COPPER	4	/* Marvell 88E1011S */
-#define SK_PHY_MARV_FIBER	5	/* Marvell 88E1011S working on fiber */
-
-/*
- * PHY addresses (bits 12..8 of PHY address reg)
- */
-#define PHY_ADDR_XMAC	(0<<8)
-#define PHY_ADDR_BCOM	(1<<8)
-#define PHY_ADDR_LONE	(3<<8)
-#define PHY_ADDR_NAT	(0<<8)
-
-/* GPHY address (bits 15..11 of SMI control reg) */
-#define PHY_ADDR_MARV	0
-
-/*
- * macros to access the PHY
- *
- * PHY_READ()		read a 16 bit value from the PHY
- * PHY_WRITE()		write a 16 bit value to the PHY
- *
- * para:
- * 	IoC		I/O context needed for SK I/O macros
- * 	pPort	Pointer to port struct for PhyAddr
- * 	Mac		XMAC to access		values: MAC_1 or MAC_2
- * 	PhyReg	PHY Register to read or write
- * 	(p)Val	Value or pointer to the value which should be read or
- *			written.
- *
- * usage:	PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value);
- * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never
- *          comes back. This is checked in DEBUG mode.
- */
-#ifndef DEBUG
-#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) {						\
-	SK_U16 Mmu;  														\
-																		\
-	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
-	XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));							\
-	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
-		do {  															\
-			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
-		} while ((Mmu & XM_MMU_PHY_RDY) == 0);							\
-		XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));						\
-	}  																	\
-}
-#else
-#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) {						\
-	SK_U16 Mmu;  														\
-	int __i = 0;														\
-																		\
-	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
-	XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));							\
-	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
-		do {  															\
-			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
-			__i++;														\
-			if (__i > 100000) {											\
-				SK_DBG_PRINTF("*****************************\n");		\
-				SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n");		\
-				SK_DBG_PRINTF("*****************************\n");		\
-				break;													\
-			}															\
-		} while ((Mmu & XM_MMU_PHY_RDY) == 0);							\
-		XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal));						\
-	}  																	\
-}
-#endif /* DEBUG */
-
-#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) {						\
-	SK_U16 Mmu;															\
-																		\
-	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
-		do {  															\
-			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
-		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);							\
-	}  																	\
-	XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr);	\
-	XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val));							\
-	if ((pPort)->PhyType != SK_PHY_XMAC) {								\
-		do {  															\
-			XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu);					\
-		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);							\
-	}  																	\
-}
-
-/*
- *	Macro PCI_C()
- *
- *	Use this macro to access PCI config register from the I/O space.
- *
- * para:
- *	Addr	PCI configuration register to access.
- *			Values:	PCI_VENDOR_ID ... PCI_VPD_ADR_REG,
- *
- * usage	SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal);
- */
-#define PCI_C(Addr)	(B7_CFG_SPC + (Addr))	/* PCI Config Space */
-
-/*
- *	Macro SK_HW_ADDR(Base, Addr)
- *
- *	Calculates the effective HW address
- *
- * para:
- *	Base	I/O or memory base address
- *	Addr	Address offset
- *
- * usage:	May be used in SK_INxx and SK_OUTxx macros
- *		#define SK_IN8(pAC, Addr, pVal) ...\
- *			*pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr)))
- */
-#ifdef SK_MEM_MAPPED_IO
-#define SK_HW_ADDR(Base, Addr)	((Base) + (Addr))
-#else  /* SK_MEM_MAPPED_IO */
-#define SK_HW_ADDR(Base, Addr)	\
-			((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0)))
-#endif /* SK_MEM_MAPPED_IO */
-
-#define SZ_LONG	(sizeof(SK_U32))
-
-/*
- *	Macro SK_HWAC_LINK_LED()
- *
- *	Use this macro to set the link LED mode.
- * para:
- *	pAC		Pointer to adapter context struct
- *	IoC		I/O context needed for SK I/O macros
- *  Port	Port number
- *	Mode	Mode to set for this LED
- */
-#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \
-	SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode);
-
-
-/* typedefs *******************************************************************/
-
-
-/* function prototypes ********************************************************/
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_SKGEHW_H */
diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h
deleted file mode 100644
index e6b0016a695c..000000000000
--- a/drivers/net/sk98lin/h/skgehwt.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/******************************************************************************
- *
- * Name:	skhwt.h
- * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
- * Version:	$Revision: 1.7 $
- * Date:	$Date: 2003/09/16 12:55:08 $
- * Purpose:	Defines for the hardware timer functions
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKGEHWT.H	contains all defines and types for the timer functions
- */
-
-#ifndef	_SKGEHWT_H_
-#define _SKGEHWT_H_
-
-/*
- * SK Hardware Timer
- * - needed wherever the HWT module is used
- * - use in Adapters context name pAC->Hwt
- */
-typedef	struct s_Hwt {
-	SK_U32		TStart;	/* HWT start */
-	SK_U32		TStop;	/* HWT stop */
-	int		TActive;	/* HWT: flag : active/inactive */
-} SK_HWT;
-
-extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc);
-extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time);
-extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc);
-extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc);
-extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc);
-#endif	/* _SKGEHWT_H_ */
diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h
deleted file mode 100644
index d9b6f6d8dfe2..000000000000
--- a/drivers/net/sk98lin/h/skgei2c.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgei2c.h
- * Project:	Gigabit Ethernet Adapters, TWSI-Module
- * Version:	$Revision: 1.25 $
- * Date:	$Date: 2003/10/20 09:06:05 $
- * Purpose:	Special defines for TWSI
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKGEI2C.H	contains all SK-98xx specific defines for the TWSI handling
- */
-
-#ifndef _INC_SKGEI2C_H_
-#define _INC_SKGEI2C_H_
-
-/*
- * Macros to access the B2_I2C_CTRL
- */
-#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \
-	SK_OUT32(IoC, B2_I2C_CTRL,\
-		(flag ? 0x80000000UL : 0x0L) | \
-		(((SK_U32)reg << 16) & I2C_ADDR) | \
-		(((SK_U32)dev << 9) & I2C_DEV_SEL) | \
-		(dev_size & I2C_DEV_SIZE) | \
-		((burst << 4) & I2C_BURST_LEN))
-
-#define SK_I2C_STOP(IoC) {				\
-	SK_U32	I2cCtrl;				\
-	SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl);		\
-	SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP);	\
-}
-
-#define SK_I2C_GET_CTL(IoC, pI2cCtrl)	SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl)
-
-/*
- * Macros to access the TWSI SW Registers
- */
-#define SK_I2C_SET_BIT(IoC, SetBits) {			\
-	SK_U8	OrgBits;				\
-	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
-	SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits));	\
-}
-
-#define SK_I2C_CLR_BIT(IoC, ClrBits) {			\
-	SK_U8	OrgBits;				\
-	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
-	SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits)));	\
-}
-
-#define SK_I2C_GET_SW(IoC, pI2cSw)	SK_IN8(IoC, B2_I2C_SW, pI2cSw)
-
-/*
- * define the possible sensor states
- */
-#define	SK_SEN_IDLE		0	/* Idle: sensor not read */
-#define	SK_SEN_VALUE	1	/* Value Read cycle */
-#define	SK_SEN_VALEXT	2	/* Extended Value Read cycle */
-
-/*
- * Conversion factor to convert read Voltage sensor to milli Volt
- * Conversion factor to convert read Temperature sensor to 10th degree Celsius
- */
-#define	SK_LM80_VT_LSB		22	/* 22mV LSB resolution */
-#define	SK_LM80_TEMP_LSB	10	/* 1 degree LSB resolution */
-#define	SK_LM80_TEMPEXT_LSB	 5	/* 0.5 degree LSB resolution for ext. val. */
-
-/*
- * formula: counter = (22500*60)/(rpm * divisor * pulses/2)
- * assuming: 6500rpm, 4 pulses, divisor 1
- */
-#define SK_LM80_FAN_FAKTOR	((22500L*60)/(1*2))
-
-/*
- * Define sensor management data
- * Maximum is reached on Genesis copper dual port and Yukon-64
- * Board specific maximum is in pAC->I2c.MaxSens
- */
-#define	SK_MAX_SENSORS	8	/* maximal no. of installed sensors */
-#define	SK_MIN_SENSORS	5	/* minimal no. of installed sensors */
-
-/*
- * To watch the state machine (SM) use the timer in two ways
- * instead of one as hitherto
- */
-#define	SK_TIMER_WATCH_SM		0	/* Watch the SM to finish in a spec. time */
-#define	SK_TIMER_NEW_GAUGING	1	/* Start a new gauging when timer expires */
-
-/*
- * Defines for the individual thresholds
- */
-
-/* Temperature sensor */
-#define	SK_SEN_TEMP_HIGH_ERR	800	/* Temperature High Err  Threshold */
-#define	SK_SEN_TEMP_HIGH_WARN	700	/* Temperature High Warn Threshold */
-#define	SK_SEN_TEMP_LOW_WARN	100	/* Temperature Low  Warn Threshold */
-#define	SK_SEN_TEMP_LOW_ERR		  0	/* Temperature Low  Err  Threshold */
-
-/* VCC which should be 5 V */
-#define	SK_SEN_PCI_5V_HIGH_ERR		5588	/* Voltage PCI High Err  Threshold */
-#define	SK_SEN_PCI_5V_HIGH_WARN		5346	/* Voltage PCI High Warn Threshold */
-#define	SK_SEN_PCI_5V_LOW_WARN		4664	/* Voltage PCI Low  Warn Threshold */
-#define	SK_SEN_PCI_5V_LOW_ERR		4422	/* Voltage PCI Low  Err  Threshold */
-
-/*
- * VIO may be 5 V or 3.3 V. Initialization takes two parts:
- * 1. Initialize lowest lower limit and highest higher limit.
- * 2. After the first value is read correct the upper or the lower limit to
- *    the appropriate C constant.
- *
- * Warning limits are +-5% of the exepected voltage.
- * Error limits are +-10% of the expected voltage.
- */
-
-/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */
-
-#define	SK_SEN_PCI_IO_5V_HIGH_ERR	5566	/* + 10% V PCI-IO High Err Threshold */
-#define	SK_SEN_PCI_IO_5V_HIGH_WARN	5324	/* +  5% V PCI-IO High Warn Threshold */
-					/*		5000	mVolt */
-#define	SK_SEN_PCI_IO_5V_LOW_WARN	4686	/* -  5% V PCI-IO Low Warn Threshold */
-#define	SK_SEN_PCI_IO_5V_LOW_ERR	4444	/* - 10% V PCI-IO Low Err Threshold */
-
-#define	SK_SEN_PCI_IO_RANGE_LIMITER	4000	/* 4000 mV range delimiter */
-
-/* correction values for the second pass */
-#define	SK_SEN_PCI_IO_3V3_HIGH_ERR	3850	/* + 15% V PCI-IO High Err Threshold */
-#define	SK_SEN_PCI_IO_3V3_HIGH_WARN	3674	/* + 10% V PCI-IO High Warn Threshold */
-					/*		3300	mVolt */
-#define	SK_SEN_PCI_IO_3V3_LOW_WARN	2926	/* - 10% V PCI-IO Low Warn Threshold */
-#define	SK_SEN_PCI_IO_3V3_LOW_ERR	2772	/* - 15% V PCI-IO Low Err  Threshold */
-
-/*
- * VDD voltage
- */
-#define	SK_SEN_VDD_HIGH_ERR		3630	/* Voltage ASIC High Err  Threshold */
-#define	SK_SEN_VDD_HIGH_WARN	3476	/* Voltage ASIC High Warn Threshold */
-#define	SK_SEN_VDD_LOW_WARN		3146	/* Voltage ASIC Low  Warn Threshold */
-#define	SK_SEN_VDD_LOW_ERR		2970	/* Voltage ASIC Low  Err  Threshold */
-
-/*
- * PHY PLL 3V3 voltage
- */
-#define	SK_SEN_PLL_3V3_HIGH_ERR		3630	/* Voltage PMA High Err  Threshold */
-#define	SK_SEN_PLL_3V3_HIGH_WARN	3476	/* Voltage PMA High Warn Threshold */
-#define	SK_SEN_PLL_3V3_LOW_WARN		3146	/* Voltage PMA Low  Warn Threshold */
-#define	SK_SEN_PLL_3V3_LOW_ERR		2970	/* Voltage PMA Low  Err  Threshold */
-
-/*
- * VAUX (YUKON only)
- */
-#define	SK_SEN_VAUX_3V3_HIGH_ERR	3630	/* Voltage VAUX High Err Threshold */
-#define	SK_SEN_VAUX_3V3_HIGH_WARN	3476	/* Voltage VAUX High Warn Threshold */
-#define	SK_SEN_VAUX_3V3_LOW_WARN	3146	/* Voltage VAUX Low Warn Threshold */
-#define	SK_SEN_VAUX_3V3_LOW_ERR		2970	/* Voltage VAUX Low Err Threshold */
-#define	SK_SEN_VAUX_0V_WARN_ERR		   0	/* if VAUX not present */
-#define	SK_SEN_VAUX_RANGE_LIMITER	1000	/* 1000 mV range delimiter */
-
-/*
- * PHY 2V5 voltage
- */
-#define	SK_SEN_PHY_2V5_HIGH_ERR		2750	/* Voltage PHY High Err Threshold */
-#define	SK_SEN_PHY_2V5_HIGH_WARN	2640	/* Voltage PHY High Warn Threshold */
-#define	SK_SEN_PHY_2V5_LOW_WARN		2376	/* Voltage PHY Low Warn Threshold */
-#define	SK_SEN_PHY_2V5_LOW_ERR		2222	/* Voltage PHY Low Err Threshold */
-
-/*
- * ASIC Core 1V5 voltage (YUKON only)
- */
-#define	SK_SEN_CORE_1V5_HIGH_ERR	1650	/* Voltage ASIC Core High Err Threshold */
-#define	SK_SEN_CORE_1V5_HIGH_WARN	1575	/* Voltage ASIC Core High Warn Threshold */
-#define	SK_SEN_CORE_1V5_LOW_WARN	1425	/* Voltage ASIC Core Low Warn Threshold */
-#define	SK_SEN_CORE_1V5_LOW_ERR 	1350	/* Voltage ASIC Core Low Err Threshold */
-
-/*
- * FAN 1 speed
- */
-/* assuming: 6500rpm +-15%, 4 pulses,
- * warning at:	80 %
- * error at:	70 %
- * no upper limit
- */
-#define	SK_SEN_FAN_HIGH_ERR		20000	/* FAN Speed High Err Threshold */
-#define	SK_SEN_FAN_HIGH_WARN	20000	/* FAN Speed High Warn Threshold */
-#define	SK_SEN_FAN_LOW_WARN		 5200	/* FAN Speed Low Warn Threshold */
-#define	SK_SEN_FAN_LOW_ERR		 4550	/* FAN Speed Low Err Threshold */
-
-/*
- * Some Voltages need dynamic thresholds
- */
-#define	SK_SEN_DYN_INIT_NONE		 0  /* No dynamic init of thresholds */
-#define	SK_SEN_DYN_INIT_PCI_IO		10  /* Init PCI-IO with new thresholds */
-#define	SK_SEN_DYN_INIT_VAUX		11  /* Init VAUX with new thresholds */
-
-extern	int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
-#endif	/* n_INC_SKGEI2C_H */
diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h
deleted file mode 100644
index 143e635ec24d..000000000000
--- a/drivers/net/sk98lin/h/skgeinit.h
+++ /dev/null
@@ -1,797 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgeinit.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.83 $
- * Date:	$Date: 2003/09/16 14:07:37 $
- * Purpose:	Structures and prototypes for the GE Init Module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEINIT_H_
-#define __INC_SKGEINIT_H_
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* __cplusplus */
-
-/* defines ********************************************************************/
-
-#define SK_TEST_VAL		0x11335577UL
-
-/* modifying Link LED behaviour (used with SkGeLinkLED()) */
-#define SK_LNK_OFF		LED_OFF
-#define SK_LNK_ON		(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
-#define SK_LNK_BLINK	(LED_ON | LED_BLK_ON  | LED_SYNC_ON)
-#define SK_LNK_PERM		(LED_ON | LED_BLK_OFF | LED_SYNC_ON)
-#define SK_LNK_TST		(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
-
-/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */
-#define SK_LED_OFF		LED_OFF
-#define SK_LED_ACTIVE	(LED_ON | LED_BLK_OFF | LED_SYNC_OFF)
-#define SK_LED_STANDBY	(LED_ON | LED_BLK_ON  | LED_SYNC_OFF)
-
-/* addressing LED Registers in SkGeXmitLED() */
-#define XMIT_LED_INI	0
-#define XMIT_LED_CNT	(RX_LED_VAL - RX_LED_INI)
-#define XMIT_LED_CTRL	(RX_LED_CTRL- RX_LED_INI)
-#define XMIT_LED_TST	(RX_LED_TST - RX_LED_INI)
-
-/* parameter 'Mode' when calling SkGeXmitLED() */
-#define SK_LED_DIS	0
-#define SK_LED_ENA	1
-#define SK_LED_TST	2
-
-/* Counter and Timer constants, for a host clock of 62.5 MHz */
-#define SK_XMIT_DUR		0x002faf08UL	/*  50 ms */
-#define SK_BLK_DUR		0x01dcd650UL	/* 500 ms */
-
-#define SK_DPOLL_DEF	0x00ee6b28UL	/* 250 ms at 62.5 MHz */
-
-#define SK_DPOLL_MAX	0x00ffffffUL	/* 268 ms at 62.5 MHz */
-										/* 215 ms at 78.12 MHz */
-
-#define SK_FACT_62		100			/* is given in percent */
-#define SK_FACT_53		 85         /* on GENESIS:	53.12 MHz */
-#define SK_FACT_78		125			/* on YUKON:	78.12 MHz */
-
-/* Timeout values */
-#define SK_MAC_TO_53	72			/* MAC arbiter timeout */
-#define SK_PKT_TO_53	0x2000		/* Packet arbiter timeout */
-#define SK_PKT_TO_MAX	0xffff		/* Maximum value */
-#define SK_RI_TO_53		36			/* RAM interface timeout */
-
-#define SK_PHY_ACC_TO	600000		/* PHY access timeout */
-
-/* RAM Buffer High Pause Threshold values */
-#define SK_RB_ULPP		( 8 * 1024)	/* Upper Level in kB/8 */
-#define SK_RB_LLPP_S	(10 * 1024)	/* Lower Level for small Queues */
-#define SK_RB_LLPP_B	(16 * 1024)	/* Lower Level for big Queues */
-
-#ifndef SK_BMU_RX_WM
-#define SK_BMU_RX_WM	0x600		/* BMU Rx Watermark */
-#endif
-#ifndef SK_BMU_TX_WM
-#define SK_BMU_TX_WM	0x600		/* BMU Tx Watermark */
-#endif
-
-/* XMAC II Rx High Watermark */
-#define SK_XM_RX_HI_WM	0x05aa		/* 1450 */
-
-/* XMAC II Tx Threshold */
-#define SK_XM_THR_REDL	0x01fb		/* .. for redundant link usage */
-#define SK_XM_THR_SL	0x01fb		/* .. for single link adapters */
-#define SK_XM_THR_MULL	0x01fb		/* .. for multiple link usage */
-#define SK_XM_THR_JUMBO	0x03fc		/* .. for jumbo frame usage */
-
-/* values for GIPortUsage */
-#define SK_RED_LINK		1		/* redundant link usage */
-#define SK_MUL_LINK		2		/* multiple link usage */
-#define SK_JUMBO_LINK	3		/* driver uses jumbo frames */
-
-/* Minimum RAM Buffer Rx Queue Size */
-#define SK_MIN_RXQ_SIZE	16		/* 16 kB */
-
-/* Minimum RAM Buffer Tx Queue Size */
-#define SK_MIN_TXQ_SIZE	16		/* 16 kB */
-
-/* Queue Size units */
-#define QZ_UNITS		0x7
-#define QZ_STEP			8
-
-/* Percentage of queue size from whole memory */
-/* 80 % for receive */
-#define RAM_QUOTA_RX	80L
-/* 0% for sync transfer */
-#define	RAM_QUOTA_SYNC	0L
-/* the rest (20%) is taken for async transfer */
-
-/* Get the rounded queue size in Bytes in 8k steps */
-#define ROUND_QUEUE_SIZE(SizeInBytes)					\
-	((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) &	\
-	~(QZ_STEP-1))
-
-/* Get the rounded queue size in KBytes in 8k steps */
-#define ROUND_QUEUE_SIZE_KB(Kilobytes) \
-	ROUND_QUEUE_SIZE((Kilobytes) * 1024L)
-
-/* Types of RAM Buffer Queues */
-#define SK_RX_SRAM_Q	1	/* small receive queue */
-#define SK_RX_BRAM_Q	2	/* big receive queue */
-#define SK_TX_RAM_Q		3	/* small or big transmit queue */
-
-/* parameter 'Dir' when calling SkGeStopPort() */
-#define SK_STOP_TX	1	/* Stops the transmit path, resets the XMAC */
-#define SK_STOP_RX	2	/* Stops the receive path */
-#define SK_STOP_ALL	3	/* Stops Rx and Tx path, resets the XMAC */
-
-/* parameter 'RstMode' when calling SkGeStopPort() */
-#define SK_SOFT_RST	1	/* perform a software reset */
-#define SK_HARD_RST	2	/* perform a hardware reset */
-
-/* Init Levels */
-#define SK_INIT_DATA	0	/* Init level 0: init data structures */
-#define SK_INIT_IO		1	/* Init level 1: init with IOs */
-#define SK_INIT_RUN		2	/* Init level 2: init for run time */
-
-/* Link Mode Parameter */
-#define SK_LMODE_HALF		1	/* Half Duplex Mode */
-#define SK_LMODE_FULL		2	/* Full Duplex Mode */
-#define SK_LMODE_AUTOHALF	3	/* AutoHalf Duplex Mode */
-#define SK_LMODE_AUTOFULL	4	/* AutoFull Duplex Mode */
-#define SK_LMODE_AUTOBOTH	5	/* AutoBoth Duplex Mode */
-#define SK_LMODE_AUTOSENSE	6	/* configured mode auto sensing */
-#define SK_LMODE_INDETERMINATED	7	/* indeterminated */
-
-/* Auto-negotiation timeout in 100ms granularity */
-#define SK_AND_MAX_TO		6	/* Wait 600 msec before link comes up */
-
-/* Auto-negotiation error codes */
-#define SK_AND_OK			0	/* no error */
-#define SK_AND_OTHER		1	/* other error than below */
-#define SK_AND_DUP_CAP		2	/* Duplex capabilities error */
-
-
-/* Link Speed Capabilities */
-#define SK_LSPEED_CAP_AUTO			(1<<0)	/* Automatic resolution */
-#define SK_LSPEED_CAP_10MBPS		(1<<1)	/* 10 Mbps */
-#define SK_LSPEED_CAP_100MBPS		(1<<2)	/* 100 Mbps */
-#define SK_LSPEED_CAP_1000MBPS		(1<<3)	/* 1000 Mbps */
-#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */
-
-/* Link Speed Parameter */
-#define SK_LSPEED_AUTO				1	/* Automatic resolution */
-#define SK_LSPEED_10MBPS			2	/* 10 Mbps */
-#define SK_LSPEED_100MBPS			3	/* 100 Mbps */
-#define SK_LSPEED_1000MBPS			4	/* 1000 Mbps */
-#define SK_LSPEED_INDETERMINATED	5	/* indeterminated */
-
-/* Link Speed Current State */
-#define SK_LSPEED_STAT_UNKNOWN		1
-#define SK_LSPEED_STAT_10MBPS		2
-#define SK_LSPEED_STAT_100MBPS 		3
-#define SK_LSPEED_STAT_1000MBPS		4
-#define SK_LSPEED_STAT_INDETERMINATED 5
-
-
-/* Link Capability Parameter */
-#define SK_LMODE_CAP_HALF		(1<<0)	/* Half Duplex Mode */
-#define SK_LMODE_CAP_FULL		(1<<1)	/* Full Duplex Mode */
-#define SK_LMODE_CAP_AUTOHALF	(1<<2)	/* AutoHalf Duplex Mode */
-#define SK_LMODE_CAP_AUTOFULL	(1<<3)	/* AutoFull Duplex Mode */
-#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */
-
-/* Link Mode Current State */
-#define SK_LMODE_STAT_UNKNOWN	1	/* Unknown Duplex Mode */
-#define SK_LMODE_STAT_HALF		2	/* Half Duplex Mode */
-#define SK_LMODE_STAT_FULL		3	/* Full Duplex Mode */
-#define SK_LMODE_STAT_AUTOHALF	4	/* Half Duplex Mode obtained by Auto-Neg */
-#define SK_LMODE_STAT_AUTOFULL	5	/* Full Duplex Mode obtained by Auto-Neg */
-#define SK_LMODE_STAT_INDETERMINATED 6	/* indeterminated */
-
-/* Flow Control Mode Parameter (and capabilities) */
-#define SK_FLOW_MODE_NONE		1	/* No Flow-Control */
-#define SK_FLOW_MODE_LOC_SEND	2	/* Local station sends PAUSE */
-#define SK_FLOW_MODE_SYMMETRIC	3	/* Both stations may send PAUSE */
-#define SK_FLOW_MODE_SYM_OR_REM	4	/* Both stations may send PAUSE or
-					 * just the remote station may send PAUSE
-					 */
-#define SK_FLOW_MODE_INDETERMINATED 5	/* indeterminated */
-
-/* Flow Control Status Parameter */
-#define SK_FLOW_STAT_NONE		1	/* No Flow Control */
-#define SK_FLOW_STAT_REM_SEND	2	/* Remote Station sends PAUSE */
-#define SK_FLOW_STAT_LOC_SEND	3	/* Local station sends PAUSE */
-#define SK_FLOW_STAT_SYMMETRIC	4	/* Both station may send PAUSE */
-#define SK_FLOW_STAT_INDETERMINATED 5	/* indeterminated */
-
-/* Master/Slave Mode Capabilities */
-#define SK_MS_CAP_AUTO		(1<<0)	/* Automatic resolution */
-#define SK_MS_CAP_MASTER	(1<<1)	/* This station is master */
-#define SK_MS_CAP_SLAVE		(1<<2)	/* This station is slave */
-#define SK_MS_CAP_INDETERMINATED (1<<3)	/* indeterminated */
-
-/* Set Master/Slave Mode Parameter (and capabilities) */
-#define SK_MS_MODE_AUTO		1	/* Automatic resolution */
-#define SK_MS_MODE_MASTER	2	/* This station is master */
-#define SK_MS_MODE_SLAVE	3	/* This station is slave */
-#define SK_MS_MODE_INDETERMINATED 4	/* indeterminated */
-
-/* Master/Slave Status Parameter */
-#define SK_MS_STAT_UNSET	1	/* The M/S status is not set */
-#define SK_MS_STAT_MASTER	2	/* This station is master */
-#define SK_MS_STAT_SLAVE	3	/* This station is slave */
-#define SK_MS_STAT_FAULT	4	/* M/S resolution failed */
-#define SK_MS_STAT_INDETERMINATED 5	/* indeterminated */
-
-/* parameter 'Mode' when calling SkXmSetRxCmd() */
-#define SK_STRIP_FCS_ON		(1<<0)	/* Enable  FCS stripping of Rx frames */
-#define SK_STRIP_FCS_OFF	(1<<1)	/* Disable FCS stripping of Rx frames */
-#define SK_STRIP_PAD_ON		(1<<2)	/* Enable  pad byte stripping of Rx fr */
-#define SK_STRIP_PAD_OFF	(1<<3)	/* Disable pad byte stripping of Rx fr */
-#define SK_LENERR_OK_ON		(1<<4)	/* Don't chk fr for in range len error */
-#define SK_LENERR_OK_OFF	(1<<5)	/* Check frames for in range len error */
-#define SK_BIG_PK_OK_ON		(1<<6)	/* Don't set Rx Error bit for big frames */
-#define SK_BIG_PK_OK_OFF	(1<<7)	/* Set Rx Error bit for big frames */
-#define SK_SELF_RX_ON		(1<<8)	/* Enable  Rx of own packets */
-#define SK_SELF_RX_OFF		(1<<9)	/* Disable Rx of own packets */
-
-/* parameter 'Para' when calling SkMacSetRxTxEn() */
-#define SK_MAC_LOOPB_ON		(1<<0)	/* Enable  MAC Loopback Mode */
-#define SK_MAC_LOOPB_OFF	(1<<1)	/* Disable MAC Loopback Mode */
-#define SK_PHY_LOOPB_ON		(1<<2)	/* Enable  PHY Loopback Mode */
-#define SK_PHY_LOOPB_OFF	(1<<3)	/* Disable PHY Loopback Mode */
-#define SK_PHY_FULLD_ON		(1<<4)	/* Enable  GMII Full Duplex */
-#define SK_PHY_FULLD_OFF	(1<<5)	/* Disable GMII Full Duplex */
-
-/* States of PState */
-#define SK_PRT_RESET	0	/* the port is reset */
-#define SK_PRT_STOP		1	/* the port is stopped (similar to SW reset) */
-#define SK_PRT_INIT		2	/* the port is initialized */
-#define SK_PRT_RUN		3	/* the port has an active link */
-
-/* PHY power down modes */
-#define PHY_PM_OPERATIONAL_MODE		0	/* PHY operational mode */
-#define PHY_PM_DEEP_SLEEP			1	/* coma mode --> minimal power */
-#define PHY_PM_IEEE_POWER_DOWN		2	/* IEEE 22.2.4.1.5 compl. power down */
-#define PHY_PM_ENERGY_DETECT		3	/* energy detect */
-#define PHY_PM_ENERGY_DETECT_PLUS	4	/* energy detect plus */
-
-/* Default receive frame limit for Workaround of XMAC Errata */
-#define SK_DEF_RX_WA_LIM	SK_CONSTU64(100)
-
-/* values for GILedBlinkCtrl (LED Blink Control) */
-#define SK_ACT_LED_BLINK	(1<<0)	/* Active LED blinking */
-#define SK_DUP_LED_NORMAL	(1<<1)	/* Duplex LED normal */
-#define SK_LED_LINK100_ON	(1<<2)	/* Link 100M LED on */
-
-/* Link Partner Status */
-#define SK_LIPA_UNKNOWN	0	/* Link partner is in unknown state */
-#define SK_LIPA_MANUAL	1	/* Link partner is in detected manual state */
-#define SK_LIPA_AUTO	2	/* Link partner is in auto-negotiation state */
-
-/* Maximum Restarts before restart is ignored (3Com WA) */
-#define SK_MAX_LRESTART	3	/* Max. 3 times the link is restarted */
-
-/* Max. Auto-neg. timeouts before link detection in sense mode is reset */
-#define SK_MAX_ANEG_TO	10	/* Max. 10 times the sense mode is reset */
-
-/* structures *****************************************************************/
-
-/*
- * MAC specific functions
- */
-typedef struct s_GeMacFunc {
-	int  (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
-	int  (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
-							SK_U16 StatAddr, SK_U32 SK_FAR *pVal);
-	int  (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port);
-	int  (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port,
-						   SK_U16 IStatus, SK_U64 SK_FAR *pVal);
-} SK_GEMACFUNC;
-
-/*
- * Port Structure
- */
-typedef	struct s_GePort {
-#ifndef SK_DIAG
-	SK_TIMER	PWaTimer;	/* Workaround Timer */
-	SK_TIMER	HalfDupChkTimer;
-#endif /* SK_DIAG */
-	SK_U32	PPrevShorts;	/* Previous Short Counter checking */
-	SK_U32	PPrevFcs;		/* Previous FCS Error Counter checking */
-	SK_U64	PPrevRx;		/* Previous RxOk Counter checking */
-	SK_U64	PRxLim;			/* Previous RxOk Counter checking */
-	SK_U64	LastOctets;		/* For half duplex hang check */
-	int		PLinkResCt;		/* Link Restart Counter */
-	int		PAutoNegTimeOut;/* Auto-negotiation timeout current value */
-	int		PAutoNegTOCt;	/* Auto-negotiation Timeout Counter */
-	int		PRxQSize;		/* Port Rx Queue Size in kB */
-	int		PXSQSize;		/* Port Synchronous  Transmit Queue Size in kB */
-	int		PXAQSize;		/* Port Asynchronous Transmit Queue Size in kB */
-	SK_U32	PRxQRamStart;	/* Receive Queue RAM Buffer Start Address */
-	SK_U32	PRxQRamEnd;		/* Receive Queue RAM Buffer End Address */
-	SK_U32	PXsQRamStart;	/* Sync Tx Queue RAM Buffer Start Address */
-	SK_U32	PXsQRamEnd;		/* Sync Tx Queue RAM Buffer End Address */
-	SK_U32	PXaQRamStart;	/* Async Tx Queue RAM Buffer Start Address */
-	SK_U32	PXaQRamEnd;		/* Async Tx Queue RAM Buffer End Address */
-	SK_U32	PRxOverCnt;		/* Receive Overflow Counter */
-	int		PRxQOff;		/* Rx Queue Address Offset */
-	int		PXsQOff;		/* Synchronous Tx Queue Address Offset */
-	int		PXaQOff;		/* Asynchronous Tx Queue Address Offset */
-	int		PhyType;		/* PHY used on this port */
-	int		PState;			/* Port status (reset, stop, init, run) */
-	SK_U16	PhyId1;			/* PHY Id1 on this port */
-	SK_U16	PhyAddr;		/* MDIO/MDC PHY address */
-	SK_U16	PIsave;			/* Saved Interrupt status word */
-	SK_U16	PSsave;			/* Saved PHY status word */
-	SK_U16	PGmANegAdv;		/* Saved GPhy AutoNegAdvertisment register */
-	SK_BOOL	PHWLinkUp;		/* The hardware Link is up (wiring) */
-	SK_BOOL	PLinkBroken;	/* Is Link broken ? */
-	SK_BOOL	PCheckPar;		/* Do we check for parity errors ? */
-	SK_BOOL	HalfDupTimerActive;
-	SK_U8	PLinkCap;		/* Link Capabilities */
-	SK_U8	PLinkModeConf;	/* Link Mode configured */
-	SK_U8	PLinkMode;		/* Link Mode currently used */
-	SK_U8	PLinkModeStatus;/* Link Mode Status */
-	SK_U8	PLinkSpeedCap;	/* Link Speed Capabilities(10/100/1000 Mbps) */
-	SK_U8	PLinkSpeed;		/* configured Link Speed (10/100/1000 Mbps) */
-	SK_U8	PLinkSpeedUsed;	/* current Link Speed (10/100/1000 Mbps) */
-	SK_U8	PFlowCtrlCap;	/* Flow Control Capabilities */
-	SK_U8	PFlowCtrlMode;	/* Flow Control Mode */
-	SK_U8	PFlowCtrlStatus;/* Flow Control Status */
-	SK_U8	PMSCap;			/* Master/Slave Capabilities */
-	SK_U8	PMSMode;		/* Master/Slave Mode */
-	SK_U8	PMSStatus;		/* Master/Slave Status */
-	SK_BOOL	PAutoNegFail;	/* Auto-negotiation fail flag */
-	SK_U8	PLipaAutoNeg;	/* Auto-negotiation possible with Link Partner */
-	SK_U8	PCableLen;		/* Cable Length */
-	SK_U8	PMdiPairLen[4];	/* MDI[0..3] Pair Length */
-	SK_U8	PMdiPairSts[4];	/* MDI[0..3] Pair Diagnostic Status */
-	SK_U8	PPhyPowerState;	/* PHY current power state */
-	int		PMacColThres;	/* MAC Collision Threshold */
-	int		PMacJamLen;		/* MAC Jam length */
-	int		PMacJamIpgVal;	/* MAC Jam IPG */
-	int		PMacJamIpgData;	/* MAC IPG Jam to Data */
-	int		PMacIpgData;	/* MAC Data IPG */
-	SK_BOOL PMacLimit4;		/* reset collision counter and backoff algorithm */
-} SK_GEPORT;
-
-/*
- * Gigabit Ethernet Initialization Struct
- * (has to be included in the adapter context)
- */
-typedef	struct s_GeInit {
-	int			GIChipId;		/* Chip Identification Number */
-	int			GIChipRev;		/* Chip Revision Number */
-	SK_U8		GIPciHwRev;		/* PCI HW Revision Number */
-	SK_BOOL		GIGenesis;		/* Genesis adapter ? */
-	SK_BOOL		GIYukon;		/* YUKON-A1/Bx chip */
-	SK_BOOL		GIYukonLite;	/* YUKON-Lite chip */
-	SK_BOOL		GICopperType;	/* Copper Type adapter ? */
-	SK_BOOL		GIPciSlot64;	/* 64-bit PCI Slot */
-	SK_BOOL		GIPciClock66;	/* 66 MHz PCI Clock */
-	SK_BOOL		GIVauxAvail;	/* VAUX available (YUKON) */
-	SK_BOOL		GIYukon32Bit;	/* 32-Bit YUKON adapter */
-	SK_U16		GILedBlinkCtrl;	/* LED Blink Control */
-	int			GIMacsFound;	/* Number of MACs found on this adapter */
-	int			GIMacType;		/* MAC Type used on this adapter */
-	int			GIHstClkFact;	/* Host Clock Factor (62.5 / HstClk * 100) */
-	int			GIPortUsage;	/* Driver Port Usage */
-	int			GILevel;		/* Initialization Level completed */
-	int			GIRamSize;		/* The RAM size of the adapter in kB */
-	int			GIWolOffs;		/* WOL Register Offset (HW-Bug in Rev. A) */
-	SK_U32		GIRamOffs;		/* RAM Address Offset for addr calculation */
-	SK_U32		GIPollTimerVal;	/* Descr. Poll Timer Init Val (HstClk ticks) */
-	SK_U32		GIValIrqMask;	/* Value for Interrupt Mask */
-	SK_U32		GITimeStampCnt;	/* Time Stamp High Counter (YUKON only) */
-	SK_GEPORT	GP[SK_MAX_MACS];/* Port Dependent Information */
-	SK_GEMACFUNC GIFunc;		/* MAC depedent functions */
-} SK_GEINIT;
-
-/*
- * Error numbers and messages for skxmac2.c and skgeinit.c
- */
-#define SKERR_HWI_E001		(SK_ERRBASE_HWINIT)
-#define SKERR_HWI_E001MSG	"SkXmClrExactAddr() has got illegal parameters"
-#define SKERR_HWI_E002		(SKERR_HWI_E001+1)
-#define SKERR_HWI_E002MSG	"SkGeInit(): Level 1 call missing"
-#define SKERR_HWI_E003		(SKERR_HWI_E002+1)
-#define SKERR_HWI_E003MSG	"SkGeInit() called with illegal init Level"
-#define SKERR_HWI_E004		(SKERR_HWI_E003+1)
-#define SKERR_HWI_E004MSG	"SkGeInitPort(): Queue Size illegal configured"
-#define SKERR_HWI_E005		(SKERR_HWI_E004+1)
-#define SKERR_HWI_E005MSG	"SkGeInitPort(): cannot init running ports"
-#define SKERR_HWI_E006		(SKERR_HWI_E005+1)
-#define SKERR_HWI_E006MSG	"SkGeMacInit(): PState does not match HW state"
-#define SKERR_HWI_E007		(SKERR_HWI_E006+1)
-#define SKERR_HWI_E007MSG	"SkXmInitDupMd() called with invalid Dup Mode"
-#define SKERR_HWI_E008		(SKERR_HWI_E007+1)
-#define SKERR_HWI_E008MSG	"SkXmSetRxCmd() called with invalid Mode"
-#define SKERR_HWI_E009		(SKERR_HWI_E008+1)
-#define SKERR_HWI_E009MSG	"SkGeCfgSync() called although PXSQSize zero"
-#define SKERR_HWI_E010		(SKERR_HWI_E009+1)
-#define SKERR_HWI_E010MSG	"SkGeCfgSync() called with invalid parameters"
-#define SKERR_HWI_E011		(SKERR_HWI_E010+1)
-#define SKERR_HWI_E011MSG	"SkGeInitPort(): Receive Queue Size too small"
-#define SKERR_HWI_E012		(SKERR_HWI_E011+1)
-#define SKERR_HWI_E012MSG	"SkGeInitPort(): invalid Queue Size specified"
-#define SKERR_HWI_E013		(SKERR_HWI_E012+1)
-#define SKERR_HWI_E013MSG	"SkGeInitPort(): cfg changed for running queue"
-#define SKERR_HWI_E014		(SKERR_HWI_E013+1)
-#define SKERR_HWI_E014MSG	"SkGeInitPort(): unknown GIPortUsage specified"
-#define SKERR_HWI_E015		(SKERR_HWI_E014+1)
-#define SKERR_HWI_E015MSG	"Illegal Link mode parameter"
-#define SKERR_HWI_E016		(SKERR_HWI_E015+1)
-#define SKERR_HWI_E016MSG	"Illegal Flow control mode parameter"
-#define SKERR_HWI_E017		(SKERR_HWI_E016+1)
-#define SKERR_HWI_E017MSG	"Illegal value specified for GIPollTimerVal"
-#define SKERR_HWI_E018		(SKERR_HWI_E017+1)
-#define SKERR_HWI_E018MSG	"FATAL: SkGeStopPort() does not terminate (Tx)"
-#define SKERR_HWI_E019		(SKERR_HWI_E018+1)
-#define SKERR_HWI_E019MSG	"Illegal Speed parameter"
-#define SKERR_HWI_E020		(SKERR_HWI_E019+1)
-#define SKERR_HWI_E020MSG	"Illegal Master/Slave parameter"
-#define SKERR_HWI_E021		(SKERR_HWI_E020+1)
-#define	SKERR_HWI_E021MSG	"MacUpdateStats(): cannot update statistic counter"
-#define	SKERR_HWI_E022		(SKERR_HWI_E021+1)
-#define	SKERR_HWI_E022MSG	"MacStatistic(): illegal statistic base address"
-#define SKERR_HWI_E023		(SKERR_HWI_E022+1)
-#define SKERR_HWI_E023MSG	"SkGeInitPort(): Transmit Queue Size too small"
-#define SKERR_HWI_E024		(SKERR_HWI_E023+1)
-#define SKERR_HWI_E024MSG	"FATAL: SkGeStopPort() does not terminate (Rx)"
-#define SKERR_HWI_E025		(SKERR_HWI_E024+1)
-#define SKERR_HWI_E025MSG	""
-
-/* function prototypes ********************************************************/
-
-#ifndef	SK_KR_PROTO
-
-/*
- * public functions in skgeinit.c
- */
-extern void	SkGePollTxD(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL PollTxD);
-
-extern void	SkGeYellowLED(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		State);
-
-extern int	SkGeCfgSync(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U32	IntTime,
-	SK_U32	LimCount,
-	int		SyncMode);
-
-extern void	SkGeLoadLnkSyncCnt(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U32	CntVal);
-
-extern void	SkGeStopPort(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Dir,
-	int		RstMode);
-
-extern int	SkGeInit(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Level);
-
-extern void	SkGeDeInit(
-	SK_AC	*pAC,
-	SK_IOC	IoC);
-
-extern int	SkGeInitPort(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkGeXmitLED(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Led,
-	int		Mode);
-
-extern int	SkGeInitAssignRamToQueues(
-	SK_AC	*pAC,
-	int		ActivePort,
-	SK_BOOL	DualNet);
-
-/*
- * public functions in skxmac2.c
- */
-extern void SkMacRxTxDisable(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacSoftRst(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacHardRst(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkXmInitMac(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkGmInitMac(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void SkMacInitPhy(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	DoLoop);
-
-extern void SkMacIrqDisable(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacFlushTxFifo(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacIrq(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern int	SkMacAutoNegDone(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacAutoNegLipaPhy(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U16	IStatus);
-
-extern int  SkMacRxTxEnable(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port);
-
-extern void	SkMacPromiscMode(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-
-extern void	SkMacHashing(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-
-extern void	SkXmPhyRead(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	SK_FAR *pVal);
-
-extern void	SkXmPhyWrite(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	Val);
-
-extern void	SkGmPhyRead(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	SK_FAR *pVal);
-
-extern void	SkGmPhyWrite(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	Val);
-
-extern void	SkXmClrExactAddr(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		StartNum,
-	int		StopNum);
-
-extern void	SkXmAutoNegLipaXmac(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_U16	IStatus);
-
-extern int SkXmUpdateStats(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkGmUpdateStats(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkXmMacStatistic(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16	StatAddr,
-	SK_U32	SK_FAR *pVal);
-
-extern int SkGmMacStatistic(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16	StatAddr,
-	SK_U32	SK_FAR *pVal);
-
-extern int SkXmResetCounter(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkGmResetCounter(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port);
-
-extern int SkXmOverflowStatus(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16  IStatus,
-	SK_U64	SK_FAR *pStatus);
-
-extern int SkGmOverflowStatus(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	unsigned int Port,
-	SK_U16	MacStatus,
-	SK_U64	SK_FAR *pStatus);
-
-extern int SkGmCableDiagStatus(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	StartTest);
-
-#ifdef SK_DIAG
-extern void	SkGePhyRead(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	*pVal);
-
-extern void	SkGePhyWrite(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Addr,
-	SK_U16	Val);
-
-extern void	SkMacSetRxCmd(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	int		Mode);
-extern void	SkMacCrcGener(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-extern void	SkMacTimeStamp(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-extern void	SkXmSendCont(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Port,
-	SK_BOOL	Enable);
-#endif /* SK_DIAG */
-
-#else	/* SK_KR_PROTO */
-
-/*
- * public functions in skgeinit.c
- */
-extern void	SkGePollTxD();
-extern void	SkGeYellowLED();
-extern int	SkGeCfgSync();
-extern void	SkGeLoadLnkSyncCnt();
-extern void	SkGeStopPort();
-extern int	SkGeInit();
-extern void	SkGeDeInit();
-extern int	SkGeInitPort();
-extern void	SkGeXmitLED();
-extern int	SkGeInitAssignRamToQueues();
-
-/*
- * public functions in skxmac2.c
- */
-extern void SkMacRxTxDisable();
-extern void	SkMacSoftRst();
-extern void	SkMacHardRst();
-extern void SkMacInitPhy();
-extern int  SkMacRxTxEnable();
-extern void SkMacPromiscMode();
-extern void SkMacHashing();
-extern void SkMacIrqDisable();
-extern void	SkMacFlushTxFifo();
-extern void	SkMacIrq();
-extern int	SkMacAutoNegDone();
-extern void	SkMacAutoNegLipaPhy();
-extern void	SkXmInitMac();
-extern void	SkXmPhyRead();
-extern void	SkXmPhyWrite();
-extern void	SkGmInitMac();
-extern void	SkGmPhyRead();
-extern void	SkGmPhyWrite();
-extern void	SkXmClrExactAddr();
-extern void	SkXmAutoNegLipaXmac();
-extern int	SkXmUpdateStats();
-extern int	SkGmUpdateStats();
-extern int	SkXmMacStatistic();
-extern int	SkGmMacStatistic();
-extern int	SkXmResetCounter();
-extern int	SkGmResetCounter();
-extern int	SkXmOverflowStatus();
-extern int	SkGmOverflowStatus();
-extern int	SkGmCableDiagStatus();
-
-#ifdef SK_DIAG
-extern void	SkGePhyRead();
-extern void	SkGePhyWrite();
-extern void	SkMacSetRxCmd();
-extern void	SkMacCrcGener();
-extern void	SkMacTimeStamp();
-extern void	SkXmSendCont();
-#endif /* SK_DIAG */
-
-#endif	/* SK_KR_PROTO */
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_SKGEINIT_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h
deleted file mode 100644
index ddd304f1a48b..000000000000
--- a/drivers/net/sk98lin/h/skgepnm2.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*****************************************************************************
- *
- * Name:	skgepnm2.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.36 $
- * Date:	$Date: 2003/05/23 12:45:13 $
- * Purpose:	Defines for Private Network Management Interface
- *
- ****************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _SKGEPNM2_H_
-#define _SKGEPNM2_H_
-
-/*
- * General definitions
- */
-#define SK_PNMI_CHIPSET_XMAC	1	/* XMAC11800FP */
-#define SK_PNMI_CHIPSET_YUKON	2	/* YUKON */
-
-#define	SK_PNMI_BUS_PCI		1	/* PCI bus*/
-
-/*
- * Actions
- */
-#define SK_PNMI_ACT_IDLE		1
-#define SK_PNMI_ACT_RESET		2
-#define SK_PNMI_ACT_SELFTEST	3
-#define SK_PNMI_ACT_RESETCNT	4
-
-/*
- * VPD releated defines
- */
-
-#define SK_PNMI_VPD_RW		1
-#define SK_PNMI_VPD_RO		2
-
-#define SK_PNMI_VPD_OK			0
-#define SK_PNMI_VPD_NOTFOUND	1
-#define SK_PNMI_VPD_CUT			2
-#define SK_PNMI_VPD_TIMEOUT		3
-#define SK_PNMI_VPD_FULL		4
-#define SK_PNMI_VPD_NOWRITE		5
-#define SK_PNMI_VPD_FATAL		6
-
-#define SK_PNMI_VPD_IGNORE	0
-#define SK_PNMI_VPD_CREATE	1
-#define SK_PNMI_VPD_DELETE	2
-
-
-/*
- * RLMT related defines
- */
-#define SK_PNMI_DEF_RLMT_CHG_THRES	240	/* 4 changes per minute */
-
-
-/*
- * VCT internal status values
- */
-#define SK_PNMI_VCT_PENDING	32
-#define SK_PNMI_VCT_TEST_DONE	64
-#define SK_PNMI_VCT_LINK	128
-
-/*
- * Internal table definitions
- */
-#define SK_PNMI_GET		0
-#define SK_PNMI_PRESET	1
-#define SK_PNMI_SET		2
-
-#define SK_PNMI_RO		0
-#define SK_PNMI_RW		1
-#define SK_PNMI_WO		2
-
-typedef struct s_OidTabEntry {
-	SK_U32			Id;
-	SK_U32			InstanceNo;
-	unsigned int	StructSize;
-	unsigned int	Offset;
-	int				Access;
-	int				(* Func)(SK_AC *pAc, SK_IOC pIo, int action,
-							 SK_U32 Id, char* pBuf, unsigned int* pLen,
-							 SK_U32 Instance, unsigned int TableIndex,
-							 SK_U32 NetNumber);
-	SK_U16			Param;
-} SK_PNMI_TAB_ENTRY;
-
-
-/*
- * Trap lengths
- */
-#define SK_PNMI_TRAP_SIMPLE_LEN			17
-#define SK_PNMI_TRAP_SENSOR_LEN_BASE	46
-#define SK_PNMI_TRAP_RLMT_CHANGE_LEN	23
-#define SK_PNMI_TRAP_RLMT_PORT_LEN		23
-
-/*
- * Number of MAC types supported
- */
-#define SK_PNMI_MAC_TYPES	(SK_MAC_GMAC + 1)
-
-/*
- * MAC statistic data list (overall set for MAC types used)
- */
-enum SK_MACSTATS {
-	SK_PNMI_HTX				= 0,
-	SK_PNMI_HTX_OCTET,
-	SK_PNMI_HTX_OCTETHIGH 	= SK_PNMI_HTX_OCTET,
-	SK_PNMI_HTX_OCTETLOW,
-	SK_PNMI_HTX_BROADCAST,
-	SK_PNMI_HTX_MULTICAST,
-	SK_PNMI_HTX_UNICAST,
-	SK_PNMI_HTX_BURST,
-	SK_PNMI_HTX_PMACC,
-	SK_PNMI_HTX_MACC,
-	SK_PNMI_HTX_COL,
-	SK_PNMI_HTX_SINGLE_COL,
-	SK_PNMI_HTX_MULTI_COL,
-	SK_PNMI_HTX_EXCESS_COL,
-	SK_PNMI_HTX_LATE_COL,
-	SK_PNMI_HTX_DEFFERAL,
-	SK_PNMI_HTX_EXCESS_DEF,
-	SK_PNMI_HTX_UNDERRUN,
-	SK_PNMI_HTX_CARRIER,
-	SK_PNMI_HTX_UTILUNDER,
-	SK_PNMI_HTX_UTILOVER,
-	SK_PNMI_HTX_64,
-	SK_PNMI_HTX_127,
-	SK_PNMI_HTX_255,
-	SK_PNMI_HTX_511,
-	SK_PNMI_HTX_1023,
-	SK_PNMI_HTX_MAX,
-	SK_PNMI_HTX_LONGFRAMES,
-	SK_PNMI_HTX_SYNC,
-	SK_PNMI_HTX_SYNC_OCTET,
-	SK_PNMI_HTX_RESERVED,
-	
-	SK_PNMI_HRX,
-	SK_PNMI_HRX_OCTET,
-	SK_PNMI_HRX_OCTETHIGH	= SK_PNMI_HRX_OCTET,
-	SK_PNMI_HRX_OCTETLOW,
-	SK_PNMI_HRX_BADOCTET,
-	SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET,
-	SK_PNMI_HRX_BADOCTETLOW,
-	SK_PNMI_HRX_BROADCAST,
-	SK_PNMI_HRX_MULTICAST,
-	SK_PNMI_HRX_UNICAST,
-	SK_PNMI_HRX_PMACC,
-	SK_PNMI_HRX_MACC,
-	SK_PNMI_HRX_PMACC_ERR,
-	SK_PNMI_HRX_MACC_UNKWN,
-	SK_PNMI_HRX_BURST,
-	SK_PNMI_HRX_MISSED,
-	SK_PNMI_HRX_FRAMING,
-	SK_PNMI_HRX_UNDERSIZE,
-	SK_PNMI_HRX_OVERFLOW,
-	SK_PNMI_HRX_JABBER,
-	SK_PNMI_HRX_CARRIER,
-	SK_PNMI_HRX_IRLENGTH,
-	SK_PNMI_HRX_SYMBOL,
-	SK_PNMI_HRX_SHORTS,
-	SK_PNMI_HRX_RUNT,
-	SK_PNMI_HRX_TOO_LONG,
-	SK_PNMI_HRX_FCS,
-	SK_PNMI_HRX_CEXT,
-	SK_PNMI_HRX_UTILUNDER,
-	SK_PNMI_HRX_UTILOVER,
-	SK_PNMI_HRX_64,
-	SK_PNMI_HRX_127,
-	SK_PNMI_HRX_255,
-	SK_PNMI_HRX_511,
-	SK_PNMI_HRX_1023,
-	SK_PNMI_HRX_MAX,
-	SK_PNMI_HRX_LONGFRAMES,
-	
-	SK_PNMI_HRX_RESERVED,
-	
-	SK_PNMI_MAX_IDX		/* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
-};
-
-/*
- * MAC specific data
- */
-typedef struct s_PnmiStatAddr {
-	SK_U16		Reg;		/* MAC register containing the value */
-	SK_BOOL		GetOffset;	/* TRUE: Offset managed by PNMI (call GetStatVal())*/
-} SK_PNMI_STATADDR;
-
-
-/*
- * SK_PNMI_STRUCT_DATA copy offset evaluation macros
- */
-#define SK_PNMI_OFF(e)		((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
-#define SK_PNMI_MAI_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
-#define SK_PNMI_VPD_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e))
-#define SK_PNMI_SEN_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e))
-#define SK_PNMI_CHK_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e))
-#define SK_PNMI_STA_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e))
-#define SK_PNMI_CNF_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e))
-#define SK_PNMI_RLM_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e))
-#define SK_PNMI_MON_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e))
-#define SK_PNMI_TRP_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e))
-
-#define SK_PNMI_SET_STAT(b,s,o)	{SK_U32	Val32; char *pVal; \
-					Val32 = (s); \
-					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
-						&(((SK_PNMI_STRUCT_DATA *)0)-> \
-						ReturnStatus.ErrorStatus)); \
-					SK_PNMI_STORE_U32(pVal, Val32); \
-					Val32 = (o); \
-					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
-						&(((SK_PNMI_STRUCT_DATA *)0)-> \
-						ReturnStatus.ErrorOffset)); \
-					SK_PNMI_STORE_U32(pVal, Val32);}
-
-/*
- * Time macros
- */
-#ifndef SK_PNMI_HUNDREDS_SEC
-#if SK_TICKS_PER_SEC == 100
-#define SK_PNMI_HUNDREDS_SEC(t)	(t)
-#else
-#define SK_PNMI_HUNDREDS_SEC(t)	(((t) * 100) / (SK_TICKS_PER_SEC))
-#endif /* !SK_TICKS_PER_SEC */
-#endif /* !SK_PNMI_HUNDREDS_SEC */
-
-/*
- * Macros to work around alignment problems
- */
-#ifndef SK_PNMI_STORE_U16
-#define SK_PNMI_STORE_U16(p,v)	{*(char *)(p) = *((char *)&(v)); \
-					*((char *)(p) + 1) = \
-						*(((char *)&(v)) + 1);}
-#endif
-
-#ifndef SK_PNMI_STORE_U32
-#define SK_PNMI_STORE_U32(p,v)	{*(char *)(p) = *((char *)&(v)); \
-					*((char *)(p) + 1) = \
-						*(((char *)&(v)) + 1); \
-					*((char *)(p) + 2) = \
-						*(((char *)&(v)) + 2); \
-					*((char *)(p) + 3) = \
-						*(((char *)&(v)) + 3);}
-#endif
-
-#ifndef SK_PNMI_STORE_U64
-#define SK_PNMI_STORE_U64(p,v)	{*(char *)(p) = *((char *)&(v)); \
-					*((char *)(p) + 1) = \
-						*(((char *)&(v)) + 1); \
-					*((char *)(p) + 2) = \
-						*(((char *)&(v)) + 2); \
-					*((char *)(p) + 3) = \
-						*(((char *)&(v)) + 3); \
-					*((char *)(p) + 4) = \
-						*(((char *)&(v)) + 4); \
-					*((char *)(p) + 5) = \
-						*(((char *)&(v)) + 5); \
-					*((char *)(p) + 6) = \
-						*(((char *)&(v)) + 6); \
-					*((char *)(p) + 7) = \
-						*(((char *)&(v)) + 7);}
-#endif
-
-#ifndef SK_PNMI_READ_U16
-#define SK_PNMI_READ_U16(p,v)	{*((char *)&(v)) = *(char *)(p); \
-					*(((char *)&(v)) + 1) = \
-						*((char *)(p) + 1);}
-#endif
-
-#ifndef SK_PNMI_READ_U32
-#define SK_PNMI_READ_U32(p,v)	{*((char *)&(v)) = *(char *)(p); \
-					*(((char *)&(v)) + 1) = \
-						*((char *)(p) + 1); \
-					*(((char *)&(v)) + 2) = \
-						*((char *)(p) + 2); \
-					*(((char *)&(v)) + 3) = \
-						*((char *)(p) + 3);}
-#endif
-
-#ifndef SK_PNMI_READ_U64
-#define SK_PNMI_READ_U64(p,v)	{*((char *)&(v)) = *(char *)(p); \
-					*(((char *)&(v)) + 1) = \
-						*((char *)(p) + 1); \
-					*(((char *)&(v)) + 2) = \
-						*((char *)(p) + 2); \
-					*(((char *)&(v)) + 3) = \
-						*((char *)(p) + 3); \
-					*(((char *)&(v)) + 4) = \
-						*((char *)(p) + 4); \
-					*(((char *)&(v)) + 5) = \
-						*((char *)(p) + 5); \
-					*(((char *)&(v)) + 6) = \
-						*((char *)(p) + 6); \
-					*(((char *)&(v)) + 7) = \
-						*((char *)(p) + 7);}
-#endif
-
-/*
- * Macros for Debug
- */
-#ifdef DEBUG
-
-#define SK_PNMI_CHECKFLAGS(vSt)	{if (pAC->Pnmi.MacUpdatedFlag > 0 || \
-					pAC->Pnmi.RlmtUpdatedFlag > 0 || \
-					pAC->Pnmi.SirqUpdatedFlag > 0) { \
-						SK_DBG_MSG(pAC, \
-						SK_DBGMOD_PNMI, \
-						SK_DBGCAT_CTRL,	\
-						("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \
-						vSt, \
-						pAC->Pnmi.MacUpdatedFlag, \
-						pAC->Pnmi.RlmtUpdatedFlag, \
-						pAC->Pnmi.SirqUpdatedFlag))}}
-
-#else	/* !DEBUG */
-
-#define SK_PNMI_CHECKFLAGS(vSt)	/* Nothing */
-
-#endif	/* !DEBUG */
-
-#endif	/* _SKGEPNM2_H_ */
diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h
deleted file mode 100644
index 1ed214ccb253..000000000000
--- a/drivers/net/sk98lin/h/skgepnmi.h
+++ /dev/null
@@ -1,962 +0,0 @@
-/*****************************************************************************
- *
- * Name:	skgepnmi.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.62 $
- * Date:	$Date: 2003/08/15 12:31:52 $
- * Purpose:	Defines for Private Network Management Interface
- *
- ****************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _SKGEPNMI_H_
-#define _SKGEPNMI_H_
-
-/*
- * Include dependencies
- */
-#include "h/sktypes.h"
-#include "h/skerror.h"
-#include "h/sktimer.h"
-#include "h/ski2c.h"
-#include "h/skaddr.h"
-#include "h/skrlmt.h"
-#include "h/skvpd.h"
-
-/*
- * Management Database Version
- */
-#define SK_PNMI_MDB_VERSION		0x00030001	/* 3.1 */
-
-
-/*
- * Event definitions
- */
-#define SK_PNMI_EVT_SIRQ_OVERFLOW		1	/* Counter overflow */
-#define SK_PNMI_EVT_SEN_WAR_LOW			2	/* Lower war thres exceeded */
-#define SK_PNMI_EVT_SEN_WAR_UPP			3	/* Upper war thres exceeded */
-#define SK_PNMI_EVT_SEN_ERR_LOW			4	/* Lower err thres exceeded */
-#define SK_PNMI_EVT_SEN_ERR_UPP			5	/* Upper err thres exceeded */
-#define SK_PNMI_EVT_CHG_EST_TIMER		6	/* Timer event for RLMT Chg */
-#define SK_PNMI_EVT_UTILIZATION_TIMER	7	/* Timer event for Utiliza. */
-#define SK_PNMI_EVT_CLEAR_COUNTER		8	/* Clear statistic counters */
-#define SK_PNMI_EVT_XMAC_RESET			9	/* XMAC will be reset */
-
-#define SK_PNMI_EVT_RLMT_PORT_UP		10	/* Port came logically up */
-#define SK_PNMI_EVT_RLMT_PORT_DOWN		11	/* Port went logically down */
-#define SK_PNMI_EVT_RLMT_SEGMENTATION	13	/* Two SP root bridges found */
-#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN	14	/* Port went logically down */
-#define SK_PNMI_EVT_RLMT_ACTIVE_UP		15	/* Port came logically up */
-#define SK_PNMI_EVT_RLMT_SET_NETS		16	/* 1. Parameter is number of nets
-												1 = single net; 2 = dual net */
-#define SK_PNMI_EVT_VCT_RESET		17	/* VCT port reset timer event started with SET. */
-
-
-/*
- * Return values
- */
-#define SK_PNMI_ERR_OK				0
-#define SK_PNMI_ERR_GENERAL			1
-#define SK_PNMI_ERR_TOO_SHORT		2
-#define SK_PNMI_ERR_BAD_VALUE		3
-#define SK_PNMI_ERR_READ_ONLY		4
-#define SK_PNMI_ERR_UNKNOWN_OID		5
-#define SK_PNMI_ERR_UNKNOWN_INST	6
-#define SK_PNMI_ERR_UNKNOWN_NET 	7
-#define SK_PNMI_ERR_NOT_SUPPORTED	10
-
-
-/*
- * Return values of driver reset function SK_DRIVER_RESET() and
- * driver event function SK_DRIVER_EVENT()
- */
-#define SK_PNMI_ERR_OK			0
-#define SK_PNMI_ERR_FAIL		1
-
-
-/*
- * Return values of driver test function SK_DRIVER_SELFTEST()
- */
-#define SK_PNMI_TST_UNKNOWN		(1 << 0)
-#define SK_PNMI_TST_TRANCEIVER		(1 << 1)
-#define SK_PNMI_TST_ASIC		(1 << 2)
-#define SK_PNMI_TST_SENSOR		(1 << 3)
-#define SK_PNMI_TST_POWERMGMT		(1 << 4)
-#define SK_PNMI_TST_PCI			(1 << 5)
-#define SK_PNMI_TST_MAC			(1 << 6)
-
-
-/*
- * RLMT specific definitions
- */
-#define SK_PNMI_RLMT_STATUS_STANDBY	1
-#define SK_PNMI_RLMT_STATUS_ACTIVE	2
-#define SK_PNMI_RLMT_STATUS_ERROR	3
-
-#define SK_PNMI_RLMT_LSTAT_PHY_DOWN	1
-#define SK_PNMI_RLMT_LSTAT_AUTONEG	2
-#define SK_PNMI_RLMT_LSTAT_LOG_DOWN	3
-#define SK_PNMI_RLMT_LSTAT_LOG_UP	4
-#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5
-
-#define SK_PNMI_RLMT_MODE_CHK_LINK	(SK_RLMT_CHECK_LINK)
-#define SK_PNMI_RLMT_MODE_CHK_RX	(SK_RLMT_CHECK_LOC_LINK)
-#define SK_PNMI_RLMT_MODE_CHK_SPT	(SK_RLMT_CHECK_SEG)
-/* #define SK_PNMI_RLMT_MODE_CHK_EX */
-
-/*
- * OID definition
- */
-#ifndef _NDIS_	/* Check, whether NDIS already included OIDs */
-
-#define OID_GEN_XMIT_OK					0x00020101
-#define OID_GEN_RCV_OK					0x00020102
-#define OID_GEN_XMIT_ERROR				0x00020103
-#define OID_GEN_RCV_ERROR				0x00020104
-#define OID_GEN_RCV_NO_BUFFER			0x00020105
-
-/* #define OID_GEN_DIRECTED_BYTES_XMIT	0x00020201 */
-#define OID_GEN_DIRECTED_FRAMES_XMIT	0x00020202
-/* #define OID_GEN_MULTICAST_BYTES_XMIT	0x00020203 */
-#define OID_GEN_MULTICAST_FRAMES_XMIT	0x00020204
-/* #define OID_GEN_BROADCAST_BYTES_XMIT	0x00020205 */
-#define OID_GEN_BROADCAST_FRAMES_XMIT	0x00020206
-/* #define OID_GEN_DIRECTED_BYTES_RCV	0x00020207 */
-#define OID_GEN_DIRECTED_FRAMES_RCV		0x00020208
-/* #define OID_GEN_MULTICAST_BYTES_RCV	0x00020209 */
-#define OID_GEN_MULTICAST_FRAMES_RCV	0x0002020A
-/* #define OID_GEN_BROADCAST_BYTES_RCV	0x0002020B */
-#define OID_GEN_BROADCAST_FRAMES_RCV	0x0002020C
-#define OID_GEN_RCV_CRC_ERROR			0x0002020D
-#define OID_GEN_TRANSMIT_QUEUE_LENGTH	0x0002020E
-
-#define OID_802_3_PERMANENT_ADDRESS		0x01010101
-#define OID_802_3_CURRENT_ADDRESS		0x01010102
-/* #define OID_802_3_MULTICAST_LIST		0x01010103 */
-/* #define OID_802_3_MAXIMUM_LIST_SIZE	0x01010104 */
-/* #define OID_802_3_MAC_OPTIONS		0x01010105 */
-			
-#define OID_802_3_RCV_ERROR_ALIGNMENT	0x01020101
-#define OID_802_3_XMIT_ONE_COLLISION	0x01020102
-#define OID_802_3_XMIT_MORE_COLLISIONS	0x01020103
-#define OID_802_3_XMIT_DEFERRED			0x01020201
-#define OID_802_3_XMIT_MAX_COLLISIONS	0x01020202
-#define OID_802_3_RCV_OVERRUN			0x01020203
-#define OID_802_3_XMIT_UNDERRUN			0x01020204
-#define OID_802_3_XMIT_TIMES_CRS_LOST	0x01020206
-#define OID_802_3_XMIT_LATE_COLLISIONS	0x01020207
-
-/*
- * PnP and PM OIDs
- */
-#ifdef SK_POWER_MGMT
-#define OID_PNP_CAPABILITIES			0xFD010100
-#define OID_PNP_SET_POWER				0xFD010101
-#define OID_PNP_QUERY_POWER				0xFD010102
-#define OID_PNP_ADD_WAKE_UP_PATTERN		0xFD010103
-#define OID_PNP_REMOVE_WAKE_UP_PATTERN	0xFD010104
-#define OID_PNP_ENABLE_WAKE_UP			0xFD010106
-#endif /* SK_POWER_MGMT */
-
-#endif /* _NDIS_ */
-
-#define OID_SKGE_MDB_VERSION			0xFF010100
-#define OID_SKGE_SUPPORTED_LIST			0xFF010101
-#define OID_SKGE_VPD_FREE_BYTES			0xFF010102
-#define OID_SKGE_VPD_ENTRIES_LIST		0xFF010103
-#define OID_SKGE_VPD_ENTRIES_NUMBER		0xFF010104
-#define OID_SKGE_VPD_KEY				0xFF010105
-#define OID_SKGE_VPD_VALUE				0xFF010106
-#define OID_SKGE_VPD_ACCESS				0xFF010107
-#define OID_SKGE_VPD_ACTION				0xFF010108
-			
-#define OID_SKGE_PORT_NUMBER			0xFF010110
-#define OID_SKGE_DEVICE_TYPE			0xFF010111
-#define OID_SKGE_DRIVER_DESCR			0xFF010112
-#define OID_SKGE_DRIVER_VERSION			0xFF010113
-#define OID_SKGE_HW_DESCR				0xFF010114
-#define OID_SKGE_HW_VERSION				0xFF010115
-#define OID_SKGE_CHIPSET				0xFF010116
-#define OID_SKGE_ACTION					0xFF010117
-#define OID_SKGE_RESULT					0xFF010118
-#define OID_SKGE_BUS_TYPE				0xFF010119
-#define OID_SKGE_BUS_SPEED				0xFF01011A
-#define OID_SKGE_BUS_WIDTH				0xFF01011B
-/* 0xFF01011C unused */
-#define OID_SKGE_DIAG_ACTION			0xFF01011D
-#define OID_SKGE_DIAG_RESULT			0xFF01011E
-#define OID_SKGE_MTU					0xFF01011F
-#define OID_SKGE_PHYS_CUR_ADDR			0xFF010120
-#define OID_SKGE_PHYS_FAC_ADDR			0xFF010121
-#define OID_SKGE_PMD					0xFF010122
-#define OID_SKGE_CONNECTOR				0xFF010123
-#define OID_SKGE_LINK_CAP				0xFF010124
-#define OID_SKGE_LINK_MODE				0xFF010125
-#define OID_SKGE_LINK_MODE_STATUS		0xFF010126
-#define OID_SKGE_LINK_STATUS			0xFF010127
-#define OID_SKGE_FLOWCTRL_CAP			0xFF010128
-#define OID_SKGE_FLOWCTRL_MODE			0xFF010129
-#define OID_SKGE_FLOWCTRL_STATUS		0xFF01012A
-#define OID_SKGE_PHY_OPERATION_CAP		0xFF01012B
-#define OID_SKGE_PHY_OPERATION_MODE		0xFF01012C
-#define OID_SKGE_PHY_OPERATION_STATUS	0xFF01012D
-#define OID_SKGE_MULTICAST_LIST			0xFF01012E
-#define OID_SKGE_CURRENT_PACKET_FILTER	0xFF01012F
-
-#define OID_SKGE_TRAP					0xFF010130
-#define OID_SKGE_TRAP_NUMBER			0xFF010131
-
-#define OID_SKGE_RLMT_MODE				0xFF010140
-#define OID_SKGE_RLMT_PORT_NUMBER		0xFF010141
-#define OID_SKGE_RLMT_PORT_ACTIVE		0xFF010142
-#define OID_SKGE_RLMT_PORT_PREFERRED	0xFF010143
-#define OID_SKGE_INTERMEDIATE_SUPPORT	0xFF010160
-
-#define OID_SKGE_SPEED_CAP				0xFF010170
-#define OID_SKGE_SPEED_MODE				0xFF010171
-#define OID_SKGE_SPEED_STATUS			0xFF010172
-
-#define OID_SKGE_BOARDLEVEL				0xFF010180
-
-#define OID_SKGE_SENSOR_NUMBER			0xFF020100			
-#define OID_SKGE_SENSOR_INDEX			0xFF020101
-#define OID_SKGE_SENSOR_DESCR			0xFF020102
-#define OID_SKGE_SENSOR_TYPE			0xFF020103
-#define OID_SKGE_SENSOR_VALUE			0xFF020104
-#define OID_SKGE_SENSOR_WAR_THRES_LOW	0xFF020105
-#define OID_SKGE_SENSOR_WAR_THRES_UPP	0xFF020106
-#define OID_SKGE_SENSOR_ERR_THRES_LOW	0xFF020107
-#define OID_SKGE_SENSOR_ERR_THRES_UPP	0xFF020108
-#define OID_SKGE_SENSOR_STATUS			0xFF020109
-#define OID_SKGE_SENSOR_WAR_CTS			0xFF02010A
-#define OID_SKGE_SENSOR_ERR_CTS			0xFF02010B
-#define OID_SKGE_SENSOR_WAR_TIME		0xFF02010C
-#define OID_SKGE_SENSOR_ERR_TIME		0xFF02010D
-
-#define OID_SKGE_CHKSM_NUMBER			0xFF020110
-#define OID_SKGE_CHKSM_RX_OK_CTS		0xFF020111
-#define OID_SKGE_CHKSM_RX_UNABLE_CTS	0xFF020112
-#define OID_SKGE_CHKSM_RX_ERR_CTS		0xFF020113
-#define OID_SKGE_CHKSM_TX_OK_CTS		0xFF020114
-#define OID_SKGE_CHKSM_TX_UNABLE_CTS	0xFF020115
-
-#define OID_SKGE_STAT_TX				0xFF020120
-#define OID_SKGE_STAT_TX_OCTETS			0xFF020121
-#define OID_SKGE_STAT_TX_BROADCAST		0xFF020122
-#define OID_SKGE_STAT_TX_MULTICAST		0xFF020123
-#define OID_SKGE_STAT_TX_UNICAST		0xFF020124
-#define OID_SKGE_STAT_TX_LONGFRAMES		0xFF020125
-#define OID_SKGE_STAT_TX_BURST			0xFF020126
-#define OID_SKGE_STAT_TX_PFLOWC			0xFF020127
-#define OID_SKGE_STAT_TX_FLOWC			0xFF020128
-#define OID_SKGE_STAT_TX_SINGLE_COL		0xFF020129
-#define OID_SKGE_STAT_TX_MULTI_COL		0xFF02012A
-#define OID_SKGE_STAT_TX_EXCESS_COL		0xFF02012B
-#define OID_SKGE_STAT_TX_LATE_COL		0xFF02012C
-#define OID_SKGE_STAT_TX_DEFFERAL		0xFF02012D
-#define OID_SKGE_STAT_TX_EXCESS_DEF		0xFF02012E
-#define OID_SKGE_STAT_TX_UNDERRUN		0xFF02012F
-#define OID_SKGE_STAT_TX_CARRIER		0xFF020130
-/* #define OID_SKGE_STAT_TX_UTIL		0xFF020131 */
-#define OID_SKGE_STAT_TX_64				0xFF020132
-#define OID_SKGE_STAT_TX_127			0xFF020133
-#define OID_SKGE_STAT_TX_255			0xFF020134
-#define OID_SKGE_STAT_TX_511			0xFF020135
-#define OID_SKGE_STAT_TX_1023			0xFF020136
-#define OID_SKGE_STAT_TX_MAX			0xFF020137
-#define OID_SKGE_STAT_TX_SYNC			0xFF020138
-#define OID_SKGE_STAT_TX_SYNC_OCTETS	0xFF020139
-#define OID_SKGE_STAT_RX				0xFF02013A
-#define OID_SKGE_STAT_RX_OCTETS			0xFF02013B
-#define OID_SKGE_STAT_RX_BROADCAST		0xFF02013C
-#define OID_SKGE_STAT_RX_MULTICAST		0xFF02013D
-#define OID_SKGE_STAT_RX_UNICAST		0xFF02013E
-#define OID_SKGE_STAT_RX_PFLOWC			0xFF02013F
-#define OID_SKGE_STAT_RX_FLOWC			0xFF020140
-#define OID_SKGE_STAT_RX_PFLOWC_ERR		0xFF020141
-#define OID_SKGE_STAT_RX_FLOWC_UNKWN	0xFF020142
-#define OID_SKGE_STAT_RX_BURST			0xFF020143
-#define OID_SKGE_STAT_RX_MISSED			0xFF020144
-#define OID_SKGE_STAT_RX_FRAMING		0xFF020145
-#define OID_SKGE_STAT_RX_OVERFLOW		0xFF020146
-#define OID_SKGE_STAT_RX_JABBER			0xFF020147
-#define OID_SKGE_STAT_RX_CARRIER		0xFF020148
-#define OID_SKGE_STAT_RX_IR_LENGTH		0xFF020149
-#define OID_SKGE_STAT_RX_SYMBOL			0xFF02014A
-#define OID_SKGE_STAT_RX_SHORTS			0xFF02014B
-#define OID_SKGE_STAT_RX_RUNT			0xFF02014C
-#define OID_SKGE_STAT_RX_CEXT			0xFF02014D
-#define OID_SKGE_STAT_RX_TOO_LONG		0xFF02014E
-#define OID_SKGE_STAT_RX_FCS			0xFF02014F
-/* #define OID_SKGE_STAT_RX_UTIL		0xFF020150 */
-#define OID_SKGE_STAT_RX_64				0xFF020151
-#define OID_SKGE_STAT_RX_127			0xFF020152
-#define OID_SKGE_STAT_RX_255			0xFF020153
-#define OID_SKGE_STAT_RX_511			0xFF020154
-#define OID_SKGE_STAT_RX_1023			0xFF020155
-#define OID_SKGE_STAT_RX_MAX			0xFF020156
-#define OID_SKGE_STAT_RX_LONGFRAMES		0xFF020157
-
-#define OID_SKGE_RLMT_CHANGE_CTS		0xFF020160
-#define OID_SKGE_RLMT_CHANGE_TIME		0xFF020161
-#define OID_SKGE_RLMT_CHANGE_ESTIM		0xFF020162
-#define OID_SKGE_RLMT_CHANGE_THRES		0xFF020163
-
-#define OID_SKGE_RLMT_PORT_INDEX		0xFF020164
-#define OID_SKGE_RLMT_STATUS			0xFF020165
-#define OID_SKGE_RLMT_TX_HELLO_CTS		0xFF020166
-#define OID_SKGE_RLMT_RX_HELLO_CTS		0xFF020167
-#define OID_SKGE_RLMT_TX_SP_REQ_CTS		0xFF020168
-#define OID_SKGE_RLMT_RX_SP_CTS			0xFF020169
-
-#define OID_SKGE_RLMT_MONITOR_NUMBER	0xFF010150
-#define OID_SKGE_RLMT_MONITOR_INDEX		0xFF010151
-#define OID_SKGE_RLMT_MONITOR_ADDR		0xFF010152
-#define OID_SKGE_RLMT_MONITOR_ERRS		0xFF010153
-#define OID_SKGE_RLMT_MONITOR_TIMESTAMP	0xFF010154
-#define OID_SKGE_RLMT_MONITOR_ADMIN		0xFF010155
-
-#define OID_SKGE_TX_SW_QUEUE_LEN		0xFF020170
-#define OID_SKGE_TX_SW_QUEUE_MAX		0xFF020171
-#define OID_SKGE_TX_RETRY				0xFF020172
-#define OID_SKGE_RX_INTR_CTS			0xFF020173
-#define OID_SKGE_TX_INTR_CTS			0xFF020174
-#define OID_SKGE_RX_NO_BUF_CTS			0xFF020175
-#define OID_SKGE_TX_NO_BUF_CTS			0xFF020176
-#define OID_SKGE_TX_USED_DESCR_NO		0xFF020177
-#define OID_SKGE_RX_DELIVERED_CTS		0xFF020178
-#define OID_SKGE_RX_OCTETS_DELIV_CTS	0xFF020179
-#define OID_SKGE_RX_HW_ERROR_CTS		0xFF02017A
-#define OID_SKGE_TX_HW_ERROR_CTS		0xFF02017B
-#define OID_SKGE_IN_ERRORS_CTS			0xFF02017C
-#define OID_SKGE_OUT_ERROR_CTS			0xFF02017D
-#define OID_SKGE_ERR_RECOVERY_CTS		0xFF02017E
-#define OID_SKGE_SYSUPTIME				0xFF02017F
-
-#define OID_SKGE_ALL_DATA				0xFF020190
-
-/* Defines for VCT. */
-#define OID_SKGE_VCT_GET				0xFF020200
-#define OID_SKGE_VCT_SET				0xFF020201
-#define OID_SKGE_VCT_STATUS				0xFF020202
-
-#ifdef SK_DIAG_SUPPORT
-/* Defines for driver DIAG mode. */
-#define OID_SKGE_DIAG_MODE				0xFF020204
-#endif /* SK_DIAG_SUPPORT */
-
-/* New OIDs */
-#define OID_SKGE_DRIVER_RELDATE			0xFF020210
-#define OID_SKGE_DRIVER_FILENAME		0xFF020211
-#define OID_SKGE_CHIPID					0xFF020212
-#define OID_SKGE_RAMSIZE				0xFF020213
-#define OID_SKGE_VAUXAVAIL				0xFF020214
-#define OID_SKGE_PHY_TYPE				0xFF020215
-#define OID_SKGE_PHY_LP_MODE			0xFF020216
-
-/* VCT struct to store a backup copy of VCT data after a port reset. */
-typedef struct s_PnmiVct {
-	SK_U8			VctStatus;
-	SK_U8			PCableLen;
-	SK_U32			PMdiPairLen[4];
-	SK_U8			PMdiPairSts[4];
-} SK_PNMI_VCT;
-
-
-/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */
-#define SK_PNMI_VCT_NONE		0
-#define SK_PNMI_VCT_OLD_VCT_DATA	1
-#define SK_PNMI_VCT_NEW_VCT_DATA	2
-#define SK_PNMI_VCT_OLD_DSP_DATA	4
-#define SK_PNMI_VCT_NEW_DSP_DATA	8
-#define SK_PNMI_VCT_RUNNING		16
-
-
-/* VCT cable test status. */
-#define SK_PNMI_VCT_NORMAL_CABLE		0
-#define SK_PNMI_VCT_SHORT_CABLE			1
-#define SK_PNMI_VCT_OPEN_CABLE			2
-#define SK_PNMI_VCT_TEST_FAIL			3
-#define SK_PNMI_VCT_IMPEDANCE_MISMATCH		4
-
-#define	OID_SKGE_TRAP_SEN_WAR_LOW		500
-#define OID_SKGE_TRAP_SEN_WAR_UPP		501
-#define	OID_SKGE_TRAP_SEN_ERR_LOW		502
-#define OID_SKGE_TRAP_SEN_ERR_UPP		503
-#define OID_SKGE_TRAP_RLMT_CHANGE_THRES	520
-#define OID_SKGE_TRAP_RLMT_CHANGE_PORT	521
-#define OID_SKGE_TRAP_RLMT_PORT_DOWN	522
-#define OID_SKGE_TRAP_RLMT_PORT_UP		523
-#define OID_SKGE_TRAP_RLMT_SEGMENTATION	524
-
-#ifdef SK_DIAG_SUPPORT
-/* Defines for driver DIAG mode. */
-#define SK_DIAG_ATTACHED	2
-#define SK_DIAG_RUNNING		1
-#define SK_DIAG_IDLE		0
-#endif /* SK_DIAG_SUPPORT */
-
-/*
- * Generic PNMI IOCTL subcommand definitions.
- */
-#define	SK_GET_SINGLE_VAR		1
-#define	SK_SET_SINGLE_VAR		2
-#define	SK_PRESET_SINGLE_VAR	3
-#define	SK_GET_FULL_MIB			4
-#define	SK_SET_FULL_MIB			5
-#define	SK_PRESET_FULL_MIB		6
-
-
-/*
- * Define error numbers and messages for syslog
- */
-#define SK_PNMI_ERR001		(SK_ERRBASE_PNMI + 1)
-#define SK_PNMI_ERR001MSG	"SkPnmiGetStruct: Unknown OID"
-#define SK_PNMI_ERR002		(SK_ERRBASE_PNMI + 2)
-#define SK_PNMI_ERR002MSG	"SkPnmiGetStruct: Cannot read VPD keys"
-#define SK_PNMI_ERR003		(SK_ERRBASE_PNMI + 3)
-#define SK_PNMI_ERR003MSG	"OidStruct: Called with wrong OID"
-#define SK_PNMI_ERR004		(SK_ERRBASE_PNMI + 4)
-#define SK_PNMI_ERR004MSG	"OidStruct: Called with wrong action"
-#define SK_PNMI_ERR005		(SK_ERRBASE_PNMI + 5)
-#define SK_PNMI_ERR005MSG	"Perform: Cannot reset driver"
-#define SK_PNMI_ERR006		(SK_ERRBASE_PNMI + 6)
-#define SK_PNMI_ERR006MSG	"Perform: Unknown OID action command"
-#define SK_PNMI_ERR007		(SK_ERRBASE_PNMI + 7)
-#define SK_PNMI_ERR007MSG	"General: Driver description not initialized"
-#define SK_PNMI_ERR008		(SK_ERRBASE_PNMI + 8)
-#define SK_PNMI_ERR008MSG	"Addr: Tried to get unknown OID"
-#define SK_PNMI_ERR009		(SK_ERRBASE_PNMI + 9)
-#define SK_PNMI_ERR009MSG	"Addr: Unknown OID"
-#define SK_PNMI_ERR010		(SK_ERRBASE_PNMI + 10)
-#define SK_PNMI_ERR010MSG	"CsumStat: Unknown OID"
-#define SK_PNMI_ERR011		(SK_ERRBASE_PNMI + 11)
-#define SK_PNMI_ERR011MSG	"SensorStat: Sensor descr string too long"
-#define SK_PNMI_ERR012		(SK_ERRBASE_PNMI + 12)
-#define SK_PNMI_ERR012MSG	"SensorStat: Unknown OID"
-#define SK_PNMI_ERR013		(SK_ERRBASE_PNMI + 13)
-#define SK_PNMI_ERR013MSG	""
-#define SK_PNMI_ERR014		(SK_ERRBASE_PNMI + 14)
-#define SK_PNMI_ERR014MSG	"Vpd: Cannot read VPD keys"
-#define SK_PNMI_ERR015		(SK_ERRBASE_PNMI + 15)
-#define SK_PNMI_ERR015MSG	"Vpd: Internal array for VPD keys to small"
-#define SK_PNMI_ERR016		(SK_ERRBASE_PNMI + 16)
-#define SK_PNMI_ERR016MSG	"Vpd: Key string too long"
-#define SK_PNMI_ERR017		(SK_ERRBASE_PNMI + 17)
-#define SK_PNMI_ERR017MSG	"Vpd: Invalid VPD status pointer"
-#define SK_PNMI_ERR018		(SK_ERRBASE_PNMI + 18)
-#define SK_PNMI_ERR018MSG	"Vpd: VPD data not valid"
-#define SK_PNMI_ERR019		(SK_ERRBASE_PNMI + 19)
-#define SK_PNMI_ERR019MSG	"Vpd: VPD entries list string too long"
-#define SK_PNMI_ERR021		(SK_ERRBASE_PNMI + 21)
-#define SK_PNMI_ERR021MSG	"Vpd: VPD data string too long"
-#define SK_PNMI_ERR022		(SK_ERRBASE_PNMI + 22)
-#define SK_PNMI_ERR022MSG	"Vpd: VPD data string too long should be errored before"
-#define SK_PNMI_ERR023		(SK_ERRBASE_PNMI + 23)
-#define SK_PNMI_ERR023MSG	"Vpd: Unknown OID in get action"
-#define SK_PNMI_ERR024		(SK_ERRBASE_PNMI + 24)
-#define SK_PNMI_ERR024MSG	"Vpd: Unknown OID in preset/set action"
-#define SK_PNMI_ERR025		(SK_ERRBASE_PNMI + 25)
-#define SK_PNMI_ERR025MSG	"Vpd: Cannot write VPD after modify entry"
-#define SK_PNMI_ERR026		(SK_ERRBASE_PNMI + 26)
-#define SK_PNMI_ERR026MSG	"Vpd: Cannot update VPD"
-#define SK_PNMI_ERR027		(SK_ERRBASE_PNMI + 27)
-#define SK_PNMI_ERR027MSG	"Vpd: Cannot delete VPD entry"
-#define SK_PNMI_ERR028		(SK_ERRBASE_PNMI + 28)
-#define SK_PNMI_ERR028MSG	"Vpd: Cannot update VPD after delete entry"
-#define SK_PNMI_ERR029		(SK_ERRBASE_PNMI + 29)
-#define SK_PNMI_ERR029MSG	"General: Driver description string too long"
-#define SK_PNMI_ERR030		(SK_ERRBASE_PNMI + 30)
-#define SK_PNMI_ERR030MSG	"General: Driver version not initialized"
-#define SK_PNMI_ERR031		(SK_ERRBASE_PNMI + 31)
-#define SK_PNMI_ERR031MSG	"General: Driver version string too long"
-#define SK_PNMI_ERR032		(SK_ERRBASE_PNMI + 32)
-#define SK_PNMI_ERR032MSG	"General: Cannot read VPD Name for HW descr"
-#define SK_PNMI_ERR033		(SK_ERRBASE_PNMI + 33)
-#define SK_PNMI_ERR033MSG	"General: HW description string too long"
-#define SK_PNMI_ERR034		(SK_ERRBASE_PNMI + 34)
-#define SK_PNMI_ERR034MSG	"General: Unknown OID"
-#define SK_PNMI_ERR035		(SK_ERRBASE_PNMI + 35)
-#define SK_PNMI_ERR035MSG	"Rlmt: Unknown OID"
-#define SK_PNMI_ERR036		(SK_ERRBASE_PNMI + 36)
-#define SK_PNMI_ERR036MSG	""
-#define SK_PNMI_ERR037		(SK_ERRBASE_PNMI + 37)
-#define SK_PNMI_ERR037MSG	"Rlmt: SK_RLMT_MODE_CHANGE event return not 0"
-#define SK_PNMI_ERR038		(SK_ERRBASE_PNMI + 38)
-#define SK_PNMI_ERR038MSG	"Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0"
-#define SK_PNMI_ERR039		(SK_ERRBASE_PNMI + 39)
-#define SK_PNMI_ERR039MSG	"RlmtStat: Unknown OID"
-#define SK_PNMI_ERR040		(SK_ERRBASE_PNMI + 40)
-#define SK_PNMI_ERR040MSG	"PowerManagement: Unknown OID"
-#define SK_PNMI_ERR041		(SK_ERRBASE_PNMI + 41)
-#define SK_PNMI_ERR041MSG	"MacPrivateConf: Unknown OID"
-#define SK_PNMI_ERR042		(SK_ERRBASE_PNMI + 42)
-#define SK_PNMI_ERR042MSG	"MacPrivateConf: SK_HWEV_SET_ROLE returned not 0"
-#define SK_PNMI_ERR043		(SK_ERRBASE_PNMI + 43)
-#define SK_PNMI_ERR043MSG	"MacPrivateConf: SK_HWEV_SET_LMODE returned not 0"
-#define SK_PNMI_ERR044		(SK_ERRBASE_PNMI + 44)
-#define SK_PNMI_ERR044MSG	"MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0"
-#define SK_PNMI_ERR045		(SK_ERRBASE_PNMI + 45)
-#define SK_PNMI_ERR045MSG	"MacPrivateConf: SK_HWEV_SET_SPEED returned not 0"
-#define SK_PNMI_ERR046		(SK_ERRBASE_PNMI + 46)
-#define SK_PNMI_ERR046MSG	"Monitor: Unknown OID"
-#define SK_PNMI_ERR047		(SK_ERRBASE_PNMI + 47)
-#define SK_PNMI_ERR047MSG	"SirqUpdate: Event function returns not 0"
-#define SK_PNMI_ERR048		(SK_ERRBASE_PNMI + 48)
-#define SK_PNMI_ERR048MSG	"RlmtUpdate: Event function returns not 0"
-#define SK_PNMI_ERR049		(SK_ERRBASE_PNMI + 49)
-#define SK_PNMI_ERR049MSG	"SkPnmiInit: Invalid size of 'CounterOffset' struct!!"
-#define SK_PNMI_ERR050		(SK_ERRBASE_PNMI + 50)
-#define SK_PNMI_ERR050MSG	"SkPnmiInit: Invalid size of 'StatAddr' table!!"
-#define SK_PNMI_ERR051		(SK_ERRBASE_PNMI + 51)
-#define SK_PNMI_ERR051MSG	"SkPnmiEvent: Port switch suspicious"
-#define SK_PNMI_ERR052		(SK_ERRBASE_PNMI + 52)
-#define SK_PNMI_ERR052MSG	""
-#define SK_PNMI_ERR053		(SK_ERRBASE_PNMI + 53)
-#define SK_PNMI_ERR053MSG	"General: Driver release date not initialized"
-#define SK_PNMI_ERR054		(SK_ERRBASE_PNMI + 54)
-#define SK_PNMI_ERR054MSG	"General: Driver release date string too long"
-#define SK_PNMI_ERR055		(SK_ERRBASE_PNMI + 55)
-#define SK_PNMI_ERR055MSG	"General: Driver file name not initialized"
-#define SK_PNMI_ERR056		(SK_ERRBASE_PNMI + 56)
-#define SK_PNMI_ERR056MSG	"General: Driver file name string too long"
-
-/*
- * Management counter macros called by the driver
- */
-#define SK_PNMI_SET_DRIVER_DESCR(pAC,v)	((pAC)->Pnmi.pDriverDescription = \
-	(char *)(v))
-
-#define SK_PNMI_SET_DRIVER_VER(pAC,v)	((pAC)->Pnmi.pDriverVersion = \
-	(char *)(v))
-
-#define SK_PNMI_SET_DRIVER_RELDATE(pAC,v)	((pAC)->Pnmi.pDriverReleaseDate = \
-	(char *)(v))
-
-#define SK_PNMI_SET_DRIVER_FILENAME(pAC,v)	((pAC)->Pnmi.pDriverFileName = \
-	(char *)(v))
-
-#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \
-	{ \
-		(pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \
-		if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \
-			(pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \
-		} \
-	}
-#define SK_PNMI_CNT_TX_RETRY(pAC,p)	(((pAC)->Pnmi.Port[p].TxRetryCts)++)
-#define SK_PNMI_CNT_RX_INTR(pAC,p)	(((pAC)->Pnmi.Port[p].RxIntrCts)++)
-#define SK_PNMI_CNT_TX_INTR(pAC,p)	(((pAC)->Pnmi.Port[p].TxIntrCts)++)
-#define SK_PNMI_CNT_NO_RX_BUF(pAC,p)	(((pAC)->Pnmi.Port[p].RxNoBufCts)++)
-#define SK_PNMI_CNT_NO_TX_BUF(pAC,p)	(((pAC)->Pnmi.Port[p].TxNoBufCts)++)
-#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \
-	((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v));
-#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \
-	{ \
-		((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \
-		(pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \
-	}
-#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p)	(((pAC)->Pnmi.Port[p].ErrRecoveryCts)++);
-
-#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \
-	{ \
-		if ((p) < SK_MAX_MACS) { \
-			((pAC)->Pnmi.Port[p].StatSyncCts)++; \
-			(pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \
-		} \
-	}
-
-#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \
-	{ \
-		if ((p) < SK_MAX_MACS) { \
-			((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \
-		} \
-	}
-
-#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \
-	{ \
-		if ((p) < SK_MAX_MACS) { \
-			((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \
-		} \
-	}
-
-#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \
-	{ \
-		if ((p) < SK_MAX_MACS) { \
-			((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \
-		} \
-	}
-
-/*
- * Conversion Macros
- */
-#define SK_PNMI_PORT_INST2LOG(i)	((unsigned int)(i) - 1)
-#define SK_PNMI_PORT_LOG2INST(l)	((unsigned int)(l) + 1)
-#define SK_PNMI_PORT_PHYS2LOG(p)	((unsigned int)(p) + 1)
-#define SK_PNMI_PORT_LOG2PHYS(pAC,l)	((unsigned int)(l) - 1)
-#define SK_PNMI_PORT_PHYS2INST(pAC,p)	\
-	(pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2))
-#define SK_PNMI_PORT_INST2PHYS(pAC,i)	((unsigned int)(i) - 2)
-
-/*
- * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct
- */
-#define SK_PNMI_VPD_KEY_SIZE	5
-#define SK_PNMI_VPD_BUFSIZE		(VPD_SIZE)
-#define SK_PNMI_VPD_ENTRIES		(VPD_SIZE / 4)
-#define SK_PNMI_VPD_DATALEN		128 /*  Number of data bytes */
-
-#define SK_PNMI_MULTICAST_LISTLEN	64
-#define SK_PNMI_SENSOR_ENTRIES		(SK_MAX_SENSORS)
-#define SK_PNMI_CHECKSUM_ENTRIES	3
-#define SK_PNMI_MAC_ENTRIES			(SK_MAX_MACS + 1)
-#define SK_PNMI_MONITOR_ENTRIES		20
-#define SK_PNMI_TRAP_ENTRIES		10
-#define SK_PNMI_TRAPLEN				128
-#define SK_PNMI_STRINGLEN1			80
-#define SK_PNMI_STRINGLEN2			25
-#define SK_PNMI_TRAP_QUEUE_LEN		512
-
-typedef struct s_PnmiVpd {
-	char			VpdKey[SK_PNMI_VPD_KEY_SIZE];
-	char			VpdValue[SK_PNMI_VPD_DATALEN];
-	SK_U8			VpdAccess;
-	SK_U8			VpdAction;
-} SK_PNMI_VPD;
-
-typedef struct s_PnmiSensor {
-	SK_U8			SensorIndex;
-	char			SensorDescr[SK_PNMI_STRINGLEN2];
-	SK_U8			SensorType;
-	SK_U32			SensorValue;
-	SK_U32			SensorWarningThresholdLow;
-	SK_U32			SensorWarningThresholdHigh;
-	SK_U32			SensorErrorThresholdLow;
-	SK_U32			SensorErrorThresholdHigh;
-	SK_U8			SensorStatus;
-	SK_U64			SensorWarningCts;
-	SK_U64			SensorErrorCts;
-	SK_U64			SensorWarningTimestamp;
-	SK_U64			SensorErrorTimestamp;
-} SK_PNMI_SENSOR;
-
-typedef struct s_PnmiChecksum {
-	SK_U64			ChecksumRxOkCts;
-	SK_U64			ChecksumRxUnableCts;
-	SK_U64			ChecksumRxErrCts;
-	SK_U64			ChecksumTxOkCts;
-	SK_U64			ChecksumTxUnableCts;
-} SK_PNMI_CHECKSUM;
-
-typedef struct s_PnmiStat {
-	SK_U64			StatTxOkCts;
-	SK_U64			StatTxOctetsOkCts;
-	SK_U64			StatTxBroadcastOkCts;
-	SK_U64			StatTxMulticastOkCts;
-	SK_U64			StatTxUnicastOkCts;
-	SK_U64			StatTxLongFramesCts;
-	SK_U64			StatTxBurstCts;
-	SK_U64			StatTxPauseMacCtrlCts;
-	SK_U64			StatTxMacCtrlCts;
-	SK_U64			StatTxSingleCollisionCts;
-	SK_U64			StatTxMultipleCollisionCts;
-	SK_U64			StatTxExcessiveCollisionCts;
-	SK_U64			StatTxLateCollisionCts;
-	SK_U64			StatTxDeferralCts;
-	SK_U64			StatTxExcessiveDeferralCts;
-	SK_U64			StatTxFifoUnderrunCts;
-	SK_U64			StatTxCarrierCts;
-	SK_U64			Dummy1; /* StatTxUtilization */
-	SK_U64			StatTx64Cts;
-	SK_U64			StatTx127Cts;
-	SK_U64			StatTx255Cts;
-	SK_U64			StatTx511Cts;
-	SK_U64			StatTx1023Cts;
-	SK_U64			StatTxMaxCts;
-	SK_U64			StatTxSyncCts;
-	SK_U64			StatTxSyncOctetsCts;
-	SK_U64			StatRxOkCts;
-	SK_U64			StatRxOctetsOkCts;
-	SK_U64			StatRxBroadcastOkCts;
-	SK_U64			StatRxMulticastOkCts;
-	SK_U64			StatRxUnicastOkCts;
-	SK_U64			StatRxLongFramesCts;
-	SK_U64			StatRxPauseMacCtrlCts;
-	SK_U64			StatRxMacCtrlCts;
-	SK_U64			StatRxPauseMacCtrlErrorCts;
-	SK_U64			StatRxMacCtrlUnknownCts;
-	SK_U64			StatRxBurstCts;
-	SK_U64			StatRxMissedCts;
-	SK_U64			StatRxFramingCts;
-	SK_U64			StatRxFifoOverflowCts;
-	SK_U64			StatRxJabberCts;
-	SK_U64			StatRxCarrierCts;
-	SK_U64			StatRxIRLengthCts;
-	SK_U64			StatRxSymbolCts;
-	SK_U64			StatRxShortsCts;
-	SK_U64			StatRxRuntCts;
-	SK_U64			StatRxCextCts;
-	SK_U64			StatRxTooLongCts;
-	SK_U64			StatRxFcsCts;
-	SK_U64			Dummy2; /* StatRxUtilization */
-	SK_U64			StatRx64Cts;
-	SK_U64			StatRx127Cts;
-	SK_U64			StatRx255Cts;
-	SK_U64			StatRx511Cts;
-	SK_U64			StatRx1023Cts;
-	SK_U64			StatRxMaxCts;
-} SK_PNMI_STAT;
-
-typedef struct s_PnmiConf {
-	char			ConfMacCurrentAddr[6];
-	char			ConfMacFactoryAddr[6];
-	SK_U8			ConfPMD;
-	SK_U8			ConfConnector;
-	SK_U32			ConfPhyType;
-	SK_U32			ConfPhyMode;
-	SK_U8			ConfLinkCapability;
-	SK_U8			ConfLinkMode;
-	SK_U8			ConfLinkModeStatus;
-	SK_U8			ConfLinkStatus;
-	SK_U8			ConfFlowCtrlCapability;
-	SK_U8			ConfFlowCtrlMode;
-	SK_U8			ConfFlowCtrlStatus;
-	SK_U8			ConfPhyOperationCapability;
-	SK_U8			ConfPhyOperationMode;
-	SK_U8			ConfPhyOperationStatus;
-	SK_U8			ConfSpeedCapability;
-	SK_U8			ConfSpeedMode;
-	SK_U8			ConfSpeedStatus;
-} SK_PNMI_CONF;
-
-typedef struct s_PnmiRlmt {
-	SK_U32			RlmtIndex;
-	SK_U32			RlmtStatus;
-	SK_U64			RlmtTxHelloCts;
-	SK_U64			RlmtRxHelloCts;
-	SK_U64			RlmtTxSpHelloReqCts;
-	SK_U64			RlmtRxSpHelloCts;
-} SK_PNMI_RLMT;
-
-typedef struct s_PnmiRlmtMonitor {
-	SK_U32			RlmtMonitorIndex;
-	char			RlmtMonitorAddr[6];
-	SK_U64			RlmtMonitorErrorCts;
-	SK_U64			RlmtMonitorTimestamp;
-	SK_U8			RlmtMonitorAdmin;
-} SK_PNMI_RLMT_MONITOR;
-
-typedef struct s_PnmiRequestStatus {
-	SK_U32			ErrorStatus;
-	SK_U32			ErrorOffset;
-} SK_PNMI_REQUEST_STATUS;
-
-typedef struct s_PnmiStrucData {
-	SK_U32			MgmtDBVersion;
-	SK_PNMI_REQUEST_STATUS	ReturnStatus;
-	SK_U32			VpdFreeBytes;
-	char			VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE];
-	SK_U32			VpdEntriesNumber;
-	SK_PNMI_VPD		Vpd[SK_PNMI_VPD_ENTRIES];
-	SK_U32			PortNumber;
-	SK_U32			DeviceType;
-	char			DriverDescr[SK_PNMI_STRINGLEN1];
-	char			DriverVersion[SK_PNMI_STRINGLEN2];
-	char			DriverReleaseDate[SK_PNMI_STRINGLEN1];
-	char			DriverFileName[SK_PNMI_STRINGLEN1];
-	char			HwDescr[SK_PNMI_STRINGLEN1];
-	char			HwVersion[SK_PNMI_STRINGLEN2];
-	SK_U16			Chipset;
-	SK_U32			ChipId;
-	SK_U8			VauxAvail;
-	SK_U32			RamSize;
-	SK_U32			MtuSize;
-	SK_U32			Action;
-	SK_U32			TestResult;
-	SK_U8			BusType;
-	SK_U8			BusSpeed;
-	SK_U8			BusWidth;
-	SK_U8			SensorNumber;
-	SK_PNMI_SENSOR	Sensor[SK_PNMI_SENSOR_ENTRIES];
-	SK_U8			ChecksumNumber;
-	SK_PNMI_CHECKSUM	Checksum[SK_PNMI_CHECKSUM_ENTRIES];
-	SK_PNMI_STAT	Stat[SK_PNMI_MAC_ENTRIES];
-	SK_PNMI_CONF	Conf[SK_PNMI_MAC_ENTRIES];
-	SK_U8			RlmtMode;
-	SK_U32			RlmtPortNumber;
-	SK_U8			RlmtPortActive;
-	SK_U8			RlmtPortPreferred;
-	SK_U64			RlmtChangeCts;
-	SK_U64			RlmtChangeTime;
-	SK_U64			RlmtChangeEstimate;
-	SK_U64			RlmtChangeThreshold;
-	SK_PNMI_RLMT	Rlmt[SK_MAX_MACS];
-	SK_U32			RlmtMonitorNumber;
-	SK_PNMI_RLMT_MONITOR	RlmtMonitor[SK_PNMI_MONITOR_ENTRIES];
-	SK_U32			TrapNumber;
-	SK_U8			Trap[SK_PNMI_TRAP_QUEUE_LEN];
-	SK_U64			TxSwQueueLen;
-	SK_U64			TxSwQueueMax;
-	SK_U64			TxRetryCts;
-	SK_U64			RxIntrCts;
-	SK_U64			TxIntrCts;
-	SK_U64			RxNoBufCts;
-	SK_U64			TxNoBufCts;
-	SK_U64			TxUsedDescrNo;
-	SK_U64			RxDeliveredCts;
-	SK_U64			RxOctetsDeliveredCts;
-	SK_U64			RxHwErrorsCts;
-	SK_U64			TxHwErrorsCts;
-	SK_U64			InErrorsCts;
-	SK_U64			OutErrorsCts;
-	SK_U64			ErrRecoveryCts;
-	SK_U64			SysUpTime;
-} SK_PNMI_STRUCT_DATA;
-
-#define SK_PNMI_STRUCT_SIZE	(sizeof(SK_PNMI_STRUCT_DATA))
-#define SK_PNMI_MIN_STRUCT_SIZE	((unsigned int)(SK_UPTR)\
-				 &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes))
-														/*
-														 * ReturnStatus field
-														 * must be located
-														 * before VpdFreeBytes
-														 */
-
-/*
- * Various definitions
- */
-#define SK_PNMI_MAX_PROTOS		3
-
-#define SK_PNMI_CNT_NO			66	/* Must have the value of the enum
-									 * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK
-									 * for check while init phase 1
-									 */
-
-/*
- * Estimate data structure
- */
-typedef struct s_PnmiEstimate {
-	unsigned int	EstValueIndex;
-	SK_U64			EstValue[7];
-	SK_U64			Estimate;
-	SK_TIMER		EstTimer;
-} SK_PNMI_ESTIMATE;
-
-
-/*
- * VCT timer data structure
- */
-typedef struct s_VctTimer {
-	SK_TIMER		VctTimer;
-} SK_PNMI_VCT_TIMER;
-
-
-/*
- * PNMI specific adapter context structure
- */
-typedef struct s_PnmiPort {
-	SK_U64			StatSyncCts;
-	SK_U64			StatSyncOctetsCts;
-	SK_U64			StatRxLongFrameCts;
-	SK_U64			StatRxFrameTooLongCts;
-	SK_U64			StatRxPMaccErr;
-	SK_U64			TxSwQueueLen;
-	SK_U64			TxSwQueueMax;
-	SK_U64			TxRetryCts;
-	SK_U64			RxIntrCts;
-	SK_U64			TxIntrCts;
-	SK_U64			RxNoBufCts;
-	SK_U64			TxNoBufCts;
-	SK_U64			TxUsedDescrNo;
-	SK_U64			RxDeliveredCts;
-	SK_U64			RxOctetsDeliveredCts;
-	SK_U64			RxHwErrorsCts;
-	SK_U64			TxHwErrorsCts;
-	SK_U64			InErrorsCts;
-	SK_U64			OutErrorsCts;
-	SK_U64			ErrRecoveryCts;
-	SK_U64			RxShortZeroMark;
-	SK_U64			CounterOffset[SK_PNMI_CNT_NO];
-	SK_U32			CounterHigh[SK_PNMI_CNT_NO];
-	SK_BOOL			ActiveFlag;
-	SK_U8			Align[3];
-} SK_PNMI_PORT;
-
-
-typedef struct s_PnmiData {
-	SK_PNMI_PORT	Port	[SK_MAX_MACS];
-	SK_PNMI_PORT	BufPort	[SK_MAX_MACS]; /* 2002-09-13 pweber  */
-	SK_U64			VirtualCounterOffset[SK_PNMI_CNT_NO];
-	SK_U32			TestResult;
-	char			HwVersion[10];
-	SK_U16			Align01;
-
-	char			*pDriverDescription;
-	char			*pDriverVersion;
-	char			*pDriverReleaseDate;
-	char			*pDriverFileName;
-
-	int				MacUpdatedFlag;
-	int				RlmtUpdatedFlag;
-	int				SirqUpdatedFlag;
-
-	SK_U64			RlmtChangeCts;
-	SK_U64			RlmtChangeTime;
-	SK_PNMI_ESTIMATE	RlmtChangeEstimate;
-	SK_U64			RlmtChangeThreshold;
-
-	SK_U64			StartUpTime;
-	SK_U32			DeviceType;
-	char			PciBusSpeed;
-	char			PciBusWidth;
-	char			Chipset;
-	char			PMD;
-	char			Connector;
-	SK_BOOL			DualNetActiveFlag;
-	SK_U16			Align02;
-
-	char			TrapBuf[SK_PNMI_TRAP_QUEUE_LEN];
-	unsigned int	TrapBufFree;
-	unsigned int	TrapQueueBeg;
-	unsigned int	TrapQueueEnd;
-	unsigned int	TrapBufPad;
-	unsigned int	TrapUnique;
-	SK_U8		VctStatus[SK_MAX_MACS];
-	SK_PNMI_VCT	VctBackup[SK_MAX_MACS];
-	SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS];
-#ifdef SK_DIAG_SUPPORT
-	SK_U32			DiagAttached;
-#endif /* SK_DIAG_SUPPORT */
-} SK_PNMI;
-
-
-/*
- * Function prototypes
- */
-extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level);
-extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf,
-	unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
-extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
-	unsigned int *pLen, SK_U32 NetIndex);
-extern int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
-	unsigned int *pLen, SK_U32 NetIndex);
-extern int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf,
-	unsigned int *pLen, SK_U32 NetIndex);
-extern int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event,
-	SK_EVPARA Param);
-extern int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf,
-	unsigned int * pLen, SK_U32 NetIndex);
-
-#endif
diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h
deleted file mode 100644
index 3eec6274e413..000000000000
--- a/drivers/net/sk98lin/h/skgesirq.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgesirq.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.30 $
- * Date:	$Date: 2003/07/04 12:34:13 $
- * Purpose:	SK specific Gigabit Ethernet special IRQ functions
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _INC_SKGESIRQ_H_
-#define _INC_SKGESIRQ_H_
-
-/* Define return codes of SkGePortCheckUp and CheckShort */
-#define	SK_HW_PS_NONE		0	/* No action needed */
-#define	SK_HW_PS_RESTART	1	/* Restart needed */
-#define	SK_HW_PS_LINK		2	/* Link Up actions needed */
-
-/*
- * Define the Event the special IRQ/INI module can handle
- */
-#define SK_HWEV_WATIM			1	/* Timeout for WA Errata #2 XMAC */
-#define SK_HWEV_PORT_START		2	/* Port Start Event by RLMT */
-#define SK_HWEV_PORT_STOP		3	/* Port Stop Event by RLMT */
-#define SK_HWEV_CLEAR_STAT		4	/* Clear Statistics by PNMI */
-#define SK_HWEV_UPDATE_STAT		5	/* Update Statistics by PNMI */
-#define SK_HWEV_SET_LMODE		6	/* Set Link Mode by PNMI */
-#define SK_HWEV_SET_FLOWMODE	7	/* Set Flow Control Mode by PNMI */
-#define SK_HWEV_SET_ROLE		8	/* Set Master/Slave (Role) by PNMI */
-#define SK_HWEV_SET_SPEED		9	/* Set Link Speed by PNMI */
-#define SK_HWEV_HALFDUP_CHK		10	/* Half Duplex Hangup Workaround */
-
-#define SK_WA_ACT_TIME		(5000000UL)	/* 5 sec */
-#define SK_WA_INA_TIME		(100000UL)	/* 100 msec */
-
-#define SK_HALFDUP_CHK_TIME	(10000UL)	/* 10 msec */
-
-/*
- * Define the error numbers and messages
- */
-#define SKERR_SIRQ_E001		(SK_ERRBASE_SIRQ+0)
-#define SKERR_SIRQ_E001MSG	"Unknown event"
-#define SKERR_SIRQ_E002		(SKERR_SIRQ_E001+1)
-#define SKERR_SIRQ_E002MSG	"Packet timeout RX1"
-#define SKERR_SIRQ_E003		(SKERR_SIRQ_E002+1)
-#define SKERR_SIRQ_E003MSG	"Packet timeout RX2"
-#define SKERR_SIRQ_E004		(SKERR_SIRQ_E003+1)
-#define SKERR_SIRQ_E004MSG	"MAC 1 not correctly initialized"
-#define SKERR_SIRQ_E005		(SKERR_SIRQ_E004+1)
-#define SKERR_SIRQ_E005MSG	"MAC 2 not correctly initialized"
-#define SKERR_SIRQ_E006		(SKERR_SIRQ_E005+1)
-#define SKERR_SIRQ_E006MSG	"CHECK failure R1"
-#define SKERR_SIRQ_E007		(SKERR_SIRQ_E006+1)
-#define SKERR_SIRQ_E007MSG	"CHECK failure R2"
-#define SKERR_SIRQ_E008		(SKERR_SIRQ_E007+1)
-#define SKERR_SIRQ_E008MSG	"CHECK failure XS1"
-#define SKERR_SIRQ_E009		(SKERR_SIRQ_E008+1)
-#define SKERR_SIRQ_E009MSG	"CHECK failure XA1"
-#define SKERR_SIRQ_E010		(SKERR_SIRQ_E009+1)
-#define SKERR_SIRQ_E010MSG	"CHECK failure XS2"
-#define SKERR_SIRQ_E011		(SKERR_SIRQ_E010+1)
-#define SKERR_SIRQ_E011MSG	"CHECK failure XA2"
-#define SKERR_SIRQ_E012		(SKERR_SIRQ_E011+1)
-#define SKERR_SIRQ_E012MSG	"unexpected IRQ Master error"
-#define SKERR_SIRQ_E013		(SKERR_SIRQ_E012+1)
-#define SKERR_SIRQ_E013MSG	"unexpected IRQ Status error"
-#define SKERR_SIRQ_E014		(SKERR_SIRQ_E013+1)
-#define SKERR_SIRQ_E014MSG	"Parity error on RAM (read)"
-#define SKERR_SIRQ_E015		(SKERR_SIRQ_E014+1)
-#define SKERR_SIRQ_E015MSG	"Parity error on RAM (write)"
-#define SKERR_SIRQ_E016		(SKERR_SIRQ_E015+1)
-#define SKERR_SIRQ_E016MSG	"Parity error MAC 1"
-#define SKERR_SIRQ_E017		(SKERR_SIRQ_E016+1)
-#define SKERR_SIRQ_E017MSG	"Parity error MAC 2"
-#define SKERR_SIRQ_E018		(SKERR_SIRQ_E017+1)
-#define SKERR_SIRQ_E018MSG	"Parity error RX 1"
-#define SKERR_SIRQ_E019		(SKERR_SIRQ_E018+1)
-#define SKERR_SIRQ_E019MSG	"Parity error RX 2"
-#define SKERR_SIRQ_E020		(SKERR_SIRQ_E019+1)
-#define SKERR_SIRQ_E020MSG	"MAC transmit FIFO underrun"
-#define SKERR_SIRQ_E021		(SKERR_SIRQ_E020+1)
-#define SKERR_SIRQ_E021MSG	"Spurious TWSI interrupt"
-#define SKERR_SIRQ_E022		(SKERR_SIRQ_E021+1)
-#define SKERR_SIRQ_E022MSG	"Cable pair swap error"
-#define SKERR_SIRQ_E023		(SKERR_SIRQ_E022+1)
-#define SKERR_SIRQ_E023MSG	"Auto-negotiation error"
-#define SKERR_SIRQ_E024		(SKERR_SIRQ_E023+1)
-#define SKERR_SIRQ_E024MSG	"FIFO overflow error"
-#define SKERR_SIRQ_E025		(SKERR_SIRQ_E024+1)
-#define SKERR_SIRQ_E025MSG	"2 Pair Downshift detected"
-
-extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
-extern int  SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
-extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
-
-#endif	/* _INC_SKGESIRQ_H_ */
diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h
deleted file mode 100644
index 6a63f4a15de6..000000000000
--- a/drivers/net/sk98lin/h/ski2c.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/******************************************************************************
- *
- * Name:	ski2c.h
- * Project:	Gigabit Ethernet Adapters, TWSI-Module
- * Version:	$Revision: 1.35 $
- * Date:	$Date: 2003/10/20 09:06:30 $
- * Purpose:	Defines to access Voltage and Temperature Sensor
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKI2C.H	contains all I2C specific defines
- */
-
-#ifndef _SKI2C_H_
-#define _SKI2C_H_
-
-typedef struct  s_Sensor SK_SENSOR;
-
-#include "h/skgei2c.h"
-
-/*
- * Define the I2C events.
- */
-#define SK_I2CEV_IRQ	1	/* IRQ happened Event */
-#define SK_I2CEV_TIM	2	/* Timeout event */
-#define SK_I2CEV_CLEAR	3	/* Clear MIB Values */
-
-/*
- * Define READ and WRITE Constants.
- */
-#define I2C_READ	0
-#define I2C_WRITE	1
-#define I2C_BURST	1
-#define I2C_SINGLE	0
-
-#define SKERR_I2C_E001		(SK_ERRBASE_I2C+0)
-#define SKERR_I2C_E001MSG	"Sensor index unknown"
-#define SKERR_I2C_E002		(SKERR_I2C_E001+1)
-#define SKERR_I2C_E002MSG	"TWSI: transfer does not complete"
-#define SKERR_I2C_E003		(SKERR_I2C_E002+1)
-#define SKERR_I2C_E003MSG	"LM80: NAK on device send"
-#define SKERR_I2C_E004		(SKERR_I2C_E003+1)
-#define SKERR_I2C_E004MSG	"LM80: NAK on register send"
-#define SKERR_I2C_E005		(SKERR_I2C_E004+1)
-#define SKERR_I2C_E005MSG	"LM80: NAK on device (2) send"
-#define SKERR_I2C_E006		(SKERR_I2C_E005+1)
-#define SKERR_I2C_E006MSG	"Unknown event"
-#define SKERR_I2C_E007		(SKERR_I2C_E006+1)
-#define SKERR_I2C_E007MSG	"LM80 read out of state"
-#define SKERR_I2C_E008		(SKERR_I2C_E007+1)
-#define SKERR_I2C_E008MSG	"Unexpected sensor read completed"
-#define SKERR_I2C_E009		(SKERR_I2C_E008+1)
-#define SKERR_I2C_E009MSG	"WARNING: temperature sensor out of range"
-#define SKERR_I2C_E010		(SKERR_I2C_E009+1)
-#define SKERR_I2C_E010MSG	"WARNING: voltage sensor out of range"
-#define SKERR_I2C_E011		(SKERR_I2C_E010+1)
-#define SKERR_I2C_E011MSG	"ERROR: temperature sensor out of range"
-#define SKERR_I2C_E012		(SKERR_I2C_E011+1)
-#define SKERR_I2C_E012MSG	"ERROR: voltage sensor out of range"
-#define SKERR_I2C_E013		(SKERR_I2C_E012+1)
-#define SKERR_I2C_E013MSG	"ERROR: couldn't init sensor"
-#define SKERR_I2C_E014		(SKERR_I2C_E013+1)
-#define SKERR_I2C_E014MSG	"WARNING: fan sensor out of range"
-#define SKERR_I2C_E015		(SKERR_I2C_E014+1)
-#define SKERR_I2C_E015MSG	"ERROR: fan sensor out of range"
-#define SKERR_I2C_E016		(SKERR_I2C_E015+1)
-#define SKERR_I2C_E016MSG	"TWSI: active transfer does not complete"
-
-/*
- * Define Timeout values
- */
-#define SK_I2C_TIM_LONG		2000000L	/* 2 seconds */
-#define SK_I2C_TIM_SHORT	 100000L	/* 100 milliseconds */
-#define SK_I2C_TIM_WATCH	1000000L	/* 1 second */
-
-/*
- * Define trap and error log hold times
- */
-#ifndef	SK_SEN_ERR_TR_HOLD
-#define SK_SEN_ERR_TR_HOLD		(4*SK_TICKS_PER_SEC)
-#endif
-#ifndef	SK_SEN_ERR_LOG_HOLD
-#define SK_SEN_ERR_LOG_HOLD		(60*SK_TICKS_PER_SEC)
-#endif
-#ifndef	SK_SEN_WARN_TR_HOLD
-#define SK_SEN_WARN_TR_HOLD		(15*SK_TICKS_PER_SEC)
-#endif
-#ifndef	SK_SEN_WARN_LOG_HOLD
-#define SK_SEN_WARN_LOG_HOLD	(15*60*SK_TICKS_PER_SEC)
-#endif
-
-/*
- * Defines for SenType
- */
-#define SK_SEN_UNKNOWN	0
-#define SK_SEN_TEMP		1
-#define SK_SEN_VOLT		2
-#define SK_SEN_FAN		3
-
-/*
- * Define for the SenErrorFlag
- */
-#define SK_SEN_ERR_NOT_PRESENT	0	/* Error Flag: Sensor not present */
-#define SK_SEN_ERR_OK			1	/* Error Flag: O.K. */
-#define SK_SEN_ERR_WARN			2	/* Error Flag: Warning */
-#define SK_SEN_ERR_ERR			3	/* Error Flag: Error */
-#define SK_SEN_ERR_FAULTY		4	/* Error Flag: Faulty */
-
-/*
- * Define the Sensor struct
- */
-struct	s_Sensor {
-	char	*SenDesc;			/* Description */
-	int		SenType;			/* Voltage or Temperature */
-	SK_I32	SenValue;			/* Current value of the sensor */
-	SK_I32	SenThreErrHigh;		/* High error Threshhold of this sensor */
-	SK_I32	SenThreWarnHigh;	/* High warning Threshhold of this sensor */
-	SK_I32	SenThreErrLow;		/* Lower error Threshold of the sensor */
-	SK_I32	SenThreWarnLow;		/* Lower warning Threshold of the sensor */
-	int		SenErrFlag;			/* Sensor indicated an error */
-	SK_BOOL	SenInit;			/* Is sensor initialized ? */
-	SK_U64	SenErrCts;			/* Error trap counter */
-	SK_U64	SenWarnCts;			/* Warning trap counter */
-	SK_U64	SenBegErrTS;		/* Begin error timestamp */
-	SK_U64	SenBegWarnTS;		/* Begin warning timestamp */
-	SK_U64	SenLastErrTrapTS;	/* Last error trap timestamp */
-	SK_U64	SenLastErrLogTS;	/* Last error log timestamp */
-	SK_U64	SenLastWarnTrapTS;	/* Last warning trap timestamp */
-	SK_U64	SenLastWarnLogTS;	/* Last warning log timestamp */
-	int		SenState;			/* Sensor State (see HW specific include) */
-	int		(*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen);
-								/* Sensors read function */
-	SK_U16	SenReg;				/* Register Address for this sensor */
-	SK_U8	SenDev;				/* Device Selection for this sensor */
-};
-
-typedef	struct	s_I2c {
-	SK_SENSOR	SenTable[SK_MAX_SENSORS];	/* Sensor Table */
-	int			CurrSens;	/* Which sensor is currently queried */
-	int			MaxSens;	/* Max. number of sensors */
-	int			TimerMode;	/* Use the timer also to watch the state machine */
-	int			InitLevel;	/* Initialized Level */
-#ifndef SK_DIAG
-	int			DummyReads;	/* Number of non-checked dummy reads */
-	SK_TIMER	SenTimer;	/* Sensors timer */
-#endif /* !SK_DIAG */
-} SK_I2C;
-
-extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level);
-#ifdef SK_DIAG
-extern	SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg,
-						 int Burst);
-#else /* !SK_DIAG */
-extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
-extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC);
-extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC);
-#endif /* !SK_DIAG */
-#endif /* n_SKI2C_H */
-
diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h
deleted file mode 100644
index 2ec40d4fdf60..000000000000
--- a/drivers/net/sk98lin/h/skqueue.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/******************************************************************************
- *
- * Name:	skqueue.h
- * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
- * Version:	$Revision: 1.16 $
- * Date:	$Date: 2003/09/16 12:50:32 $
- * Purpose:	Defines for the Event queue
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKQUEUE.H	contains all defines and types for the event queue
- */
-
-#ifndef _SKQUEUE_H_
-#define _SKQUEUE_H_
-
-
-/*
- * define the event classes to be served
- */
-#define	SKGE_DRV	1	/* Driver Event Class */
-#define	SKGE_RLMT	2	/* RLMT Event Class */
-#define	SKGE_I2C	3	/* I2C Event Class */
-#define	SKGE_PNMI	4	/* PNMI Event Class */
-#define	SKGE_CSUM	5	/* Checksum Event Class */
-#define	SKGE_HWAC	6	/* Hardware Access Event Class */
-
-#define	SKGE_SWT	9	/* Software Timer Event Class */
-#define	SKGE_LACP	10	/* LACP Aggregation Event Class */
-#define	SKGE_RSF	11	/* RSF Aggregation Event Class */
-#define	SKGE_MARKER	12	/* MARKER Aggregation Event Class */
-#define	SKGE_FD		13	/* FD Distributor Event Class */
-
-/*
- * define event queue as circular buffer
- */
-#define SK_MAX_EVENT	64
-
-/*
- * Parameter union for the Para stuff
- */
-typedef	union u_EvPara {
-	void	*pParaPtr;	/* Parameter Pointer */
-	SK_U64	Para64;		/* Parameter 64bit version */
-	SK_U32	Para32[2];	/* Parameter Array of 32bit parameters */
-} SK_EVPARA;
-
-/*
- * Event Queue
- *	skqueue.c
- * events are class/value pairs
- *	class	is addressee, e.g. RLMT, PNMI etc.
- *	value	is command, e.g. line state change, ring op change etc.
- */
-typedef	struct s_EventElem {
-	SK_U32		Class;			/* Event class */
-	SK_U32		Event;			/* Event value */
-	SK_EVPARA	Para;			/* Event parameter */
-} SK_EVENTELEM;
-
-typedef	struct s_Queue {
-	SK_EVENTELEM	EvQueue[SK_MAX_EVENT];
-	SK_EVENTELEM	*EvPut;
-	SK_EVENTELEM	*EvGet;
-} SK_QUEUE;
-
-extern	void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level);
-extern	void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event,
-	SK_EVPARA Para);
-extern	int SkEventDispatcher(SK_AC *pAC, SK_IOC Ioc);
-
-
-/* Define Error Numbers and messages */
-#define	SKERR_Q_E001	(SK_ERRBASE_QUEUE+0)
-#define	SKERR_Q_E001MSG	"Event queue overflow"
-#define	SKERR_Q_E002	(SKERR_Q_E001+1)
-#define	SKERR_Q_E002MSG	"Undefined event class"
-#endif	/* _SKQUEUE_H_ */
-
diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h
deleted file mode 100644
index ca75dfdcf2d6..000000000000
--- a/drivers/net/sk98lin/h/skrlmt.h
+++ /dev/null
@@ -1,438 +0,0 @@
-/******************************************************************************
- *
- * Name:	skrlmt.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.37 $
- * Date:	$Date: 2003/04/15 09:43:43 $
- * Purpose:	Header file for Redundant Link ManagemenT.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the header file for Redundant Link ManagemenT.
- *
- * Include File Hierarchy:
- *
- *	"skdrv1st.h"
- *	...
- *	"sktypes.h"
- *	"skqueue.h"
- *	"skaddr.h"
- *	"skrlmt.h"
- *	...
- *	"skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKRLMT_H
-#define __INC_SKRLMT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* cplusplus */
-
-/* defines ********************************************************************/
-
-#define	SK_RLMT_NET_DOWN_TEMP	1	/* NET_DOWN due to last port down. */
-#define	SK_RLMT_NET_DOWN_FINAL	2	/* NET_DOWN due to RLMT_STOP. */
-
-/* ----- Default queue sizes - must be multiples of 8 KB ----- */
-
-/* Less than 8 KB free in RX queue => pause frames. */
-#define SK_RLMT_STANDBY_QRXSIZE	128	/* Size of rx standby queue in KB. */
-#define SK_RLMT_STANDBY_QXASIZE	32	/* Size of async standby queue in KB. */
-#define SK_RLMT_STANDBY_QXSSIZE	0	/* Size of sync standby queue in KB. */
-
-#define SK_RLMT_MAX_TX_BUF_SIZE	60	/* Maximum RLMT transmit size. */
-
-/* ----- PORT states ----- */
-
-#define SK_RLMT_PS_INIT			0	/* Port state: Init. */
-#define SK_RLMT_PS_LINK_DOWN	1	/* Port state: Link down. */
-#define SK_RLMT_PS_DOWN			2	/* Port state: Port down. */
-#define SK_RLMT_PS_GOING_UP		3	/* Port state: Going up. */
-#define SK_RLMT_PS_UP			4	/* Port state: Up. */
-
-/* ----- RLMT states ----- */
-
-#define SK_RLMT_RS_INIT			0	/* RLMT state: Init. */
-#define SK_RLMT_RS_NET_DOWN		1	/* RLMT state: Net down. */
-#define SK_RLMT_RS_NET_UP		2	/* RLMT state: Net up. */
-
-/* ----- PORT events ----- */
-
-#define SK_RLMT_LINK_UP			1001	/* Link came up. */
-#define SK_RLMT_LINK_DOWN		1002	/* Link went down. */
-#define SK_RLMT_PORT_ADDR		1003	/* Port address changed. */
-
-/* ----- RLMT events ----- */
-
-#define SK_RLMT_START			2001	/* Start RLMT. */
-#define SK_RLMT_STOP			2002	/* Stop RLMT. */
-#define SK_RLMT_PACKET_RECEIVED	2003	/* Packet was received for RLMT. */
-#define SK_RLMT_STATS_CLEAR		2004	/* Clear statistics. */
-#define SK_RLMT_STATS_UPDATE	2005	/* Update statistics. */
-#define SK_RLMT_PREFPORT_CHANGE	2006	/* Change preferred port. */
-#define SK_RLMT_MODE_CHANGE		2007	/* New RlmtMode. */
-#define SK_RLMT_SET_NETS		2008	/* Number of Nets (1 or 2). */
-
-/* ----- RLMT mode bits ----- */
-
-/*
- * CAUTION:	These defines are private to RLMT.
- *			Please use the RLMT mode defines below.
- */
-
-#define SK_RLMT_CHECK_LINK		  1		/* Check Link. */
-#define SK_RLMT_CHECK_LOC_LINK	  2		/* Check other link on same adapter. */
-#define SK_RLMT_CHECK_SEG		  4		/* Check segmentation. */
-
-#ifndef RLMT_CHECK_REMOTE
-#define SK_RLMT_CHECK_OTHERS	SK_RLMT_CHECK_LOC_LINK
-#else	/* RLMT_CHECK_REMOTE */
-#define SK_RLMT_CHECK_REM_LINK	  8		/* Check link(s) on other adapter(s). */
-#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED	3
-#define SK_RLMT_CHECK_OTHERS	\
-		(SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
-#endif	/* RLMT_CHECK_REMOTE */
-
-#ifndef SK_RLMT_ENABLE_TRANSPARENT
-#define SK_RLMT_TRANSPARENT		  0		/* RLMT transparent - inactive. */
-#else	/* SK_RLMT_ENABLE_TRANSPARENT */
-#define SK_RLMT_TRANSPARENT		128		/* RLMT transparent. */
-#endif	/* SK_RLMT_ENABLE_TRANSPARENT */
-
-/* ----- RLMT modes ----- */
-
-/* Check Link State. */
-#define SK_RLMT_MODE_CLS	(SK_RLMT_CHECK_LINK)
-
-/* Check Local Ports: check other links on the same adapter. */
-#define SK_RLMT_MODE_CLP	(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK)
-
-/* Check Local Ports and Segmentation Status. */
-#define SK_RLMT_MODE_CLPSS	\
-		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG)
-
-#ifdef RLMT_CHECK_REMOTE
-/* Check Local and Remote Ports: check links (local or remote). */
-	Name of define TBD!
-#define SK_RLMT_MODE_CRP	\
-		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK)
-
-/* Check Local and Remote Ports and Segmentation Status. */
-	Name of define TBD!
-#define SK_RLMT_MODE_CRPSS	\
-		(SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \
-		SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG)
-#endif	/* RLMT_CHECK_REMOTE */
-
-/* ----- RLMT lookahead result bits ----- */
-
-#define SK_RLMT_RX_RLMT			1	/* Give packet to RLMT. */
-#define SK_RLMT_RX_PROTOCOL		2	/* Give packet to protocol. */
-
-/* Macros */
-
-#if 0
-SK_AC		*pAC		/* adapter context */
-SK_U32		PortNum		/* receiving port */
-unsigned	PktLen		/* received packet's length */
-SK_BOOL		IsBc		/* Flag: packet is broadcast */
-unsigned	*pOffset	/* offs. of bytes to present to SK_RLMT_LOOKAHEAD */
-unsigned	*pNumBytes	/* #Bytes to present to SK_RLMT_LOOKAHEAD */
-#endif	/* 0 */
-
-#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \
-	SK_AC	*_pAC; \
-	SK_U32	_PortNum; \
-	_pAC = (pAC); \
-	_PortNum = (SK_U32)(PortNum); \
-	/* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \
-	_pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \
-    if (_pAC->Rlmt.RlmtOff) { \
-		*(pNumBytes) = 0; \
-    } \
-    else {\
-        if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \
-    		*(pNumBytes) = 0; \
-    	} \
-    	else if (IsBc) { \
-    		if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \
-    			*(pNumBytes) = 6; \
-    			*(pOffset) = 6; \
-    		} \
-    		else { \
-    			*(pNumBytes) = 0; \
-    		} \
-    	} \
-    	else { \
-    		if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \
-    			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
-    			*(pNumBytes) = 0; \
-    		} \
-    		else { \
-    			*(pNumBytes) = 6; \
-    			*(pOffset) = 0; \
-    		} \
-    	} \
-    } \
-}
-
-#if 0
-SK_AC		*pAC		/* adapter context */
-SK_U32		PortNum		/* receiving port */
-SK_U8		*pLaPacket,	/* received packet's data (points to pOffset) */
-SK_BOOL		IsBc		/* Flag: packet is broadcast */
-SK_BOOL		IsMc		/* Flag: packet is multicast */
-unsigned	*pForRlmt	/* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */
-SK_RLMT_LOOKAHEAD() expects *pNumBytes from
-packet offset *pOffset (s.a.) at *pLaPacket.
-
-If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is
-BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler
-can trash unneeded parts of the if construction.
-#endif	/* 0 */
-
-#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \
-	SK_AC	*_pAC; \
-	SK_U32	_PortNum; \
-	SK_U8	*_pLaPacket; \
-	_pAC = (pAC); \
-	_PortNum = (SK_U32)(PortNum); \
-	_pLaPacket = (SK_U8 *)(pLaPacket); \
-	if (IsBc) {\
-		if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \
-			_PortNum].Net->NetNumber].CurrentMacAddress.a)) { \
-			_pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \
-			_pAC->Rlmt.CheckSwitch = SK_TRUE; \
-		} \
-		/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
-		*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
-	} \
-	else if (IsMc) { \
-		if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \
-			_pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \
-			if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \
-				*(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \
-			} \
-			else { \
-				*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
-			} \
-		} \
-		else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \
-			*(pForRlmt) = SK_RLMT_RX_RLMT; \
-		} \
-		else { \
-			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
-			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
-		} \
-	} \
-	else { \
-		if (SK_ADDR_EQUAL( \
-			_pLaPacket, \
-			_pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \
-			*(pForRlmt) = SK_RLMT_RX_RLMT; \
-		} \
-		else { \
-			/* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \
-			*(pForRlmt) = SK_RLMT_RX_PROTOCOL; \
-		} \
-	} \
-}
-
-#ifdef SK_RLMT_FAST_LOOKAHEAD
-Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead.
-#endif	/* SK_RLMT_FAST_LOOKAHEAD */
-#ifdef SK_RLMT_SLOW_LOOKAHEAD
-Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead.
-#endif	/* SK_RLMT_SLOW_LOOKAHEAD */
-
-/* typedefs *******************************************************************/
-
-#ifdef SK_RLMT_MBUF_PRIVATE
-typedef struct s_RlmtMbuf {
-	some content
-} SK_RLMT_MBUF;
-#endif	/* SK_RLMT_MBUF_PRIVATE */
-
-
-#ifdef SK_LA_INFO
-typedef struct s_Rlmt_PacketInfo {
-	unsigned	PacketLength;			/* Length of packet. */
-	unsigned	PacketType;				/* Directed/Multicast/Broadcast. */
-} SK_RLMT_PINFO;
-#endif	/* SK_LA_INFO */
-
-
-typedef struct s_RootId {
-	SK_U8		Id[8];					/* Root Bridge Id. */
-} SK_RLMT_ROOT_ID;
-
-
-typedef struct s_port {
-	SK_MAC_ADDR	CheckAddr;
-	SK_BOOL		SuspectTx;
-} SK_PORT_CHECK;
-
-
-typedef struct s_RlmtNet SK_RLMT_NET;
-
-
-typedef struct s_RlmtPort {
-
-/* ----- Public part (read-only) ----- */
-
-	SK_U8			PortState;				/* Current state of this port. */
-
-	/* For PNMI */
-	SK_BOOL			LinkDown;
-	SK_BOOL			PortDown;
-	SK_U8			Align01;
-
-	SK_U32			PortNumber;				/* Number of port on adapter. */
-	SK_RLMT_NET *	Net;					/* Net port belongs to. */
-
-	SK_U64			TxHelloCts;
-	SK_U64			RxHelloCts;
-	SK_U64			TxSpHelloReqCts;
-	SK_U64			RxSpHelloCts;
-
-/* ----- Private part ----- */
-
-/*	SK_U64			PacketsRx; */				/* Total packets received. */
-	SK_U32			PacketsPerTimeSlot;		/* Packets rxed between TOs. */
-/*	SK_U32			DataPacketsPerTimeSlot; */	/* Data packets ... */
-	SK_U32			BpduPacketsPerTimeSlot;	/* BPDU packets rxed in TS. */
-	SK_U64			BcTimeStamp;			/* Time of last BC receive. */
-	SK_U64			GuTimeStamp;			/* Time of entering GOING_UP. */
-
-	SK_TIMER		UpTimer;				/* Timer struct Link/Port up. */
-	SK_TIMER		DownRxTimer;			/* Timer struct down rx. */
-	SK_TIMER		DownTxTimer;			/* Timer struct down tx. */
-
-	SK_U32			CheckingState;			/* Checking State. */
-
-	SK_ADDR_PORT *	AddrPort;
-
-	SK_U8			Random[4];				/* Random value. */
-	unsigned		PortsChecked;			/* #ports checked. */
-	unsigned		PortsSuspect;			/* #ports checked that are s. */
-	SK_PORT_CHECK	PortCheck[1];
-/*	SK_PORT_CHECK	PortCheck[SK_MAX_MACS - 1]; */
-
-	SK_BOOL			PortStarted;			/* Port is started. */
-	SK_BOOL			PortNoRx;				/* NoRx for >= 1 time slot. */
-	SK_BOOL			RootIdSet;
-	SK_RLMT_ROOT_ID	Root;					/* Root Bridge Id. */
-} SK_RLMT_PORT;
-
-
-struct s_RlmtNet {
-
-/* ----- Public part (read-only) ----- */
-
-	SK_U32			NetNumber;			/* Number of net. */
-
-	SK_RLMT_PORT *	Port[SK_MAX_MACS];	/* Ports that belong to this net. */
-	SK_U32			NumPorts;			/* Number of ports. */
-	SK_U32			PrefPort;			/* Preferred port. */
-
-	/* For PNMI */
-
-	SK_U32			ChgBcPrio;			/* Change Priority of last broadcast received */
-	SK_U32			RlmtMode;			/* Check ... */
-	SK_U32			ActivePort;			/* Active port. */
-	SK_U32			Preference;		/* 0xFFFFFFFF: Automatic. */
-
-	SK_U8			RlmtState;			/* Current RLMT state. */
-
-/* ----- Private part ----- */
-	SK_BOOL			RootIdSet;
-	SK_U16			Align01;
-
-	int				LinksUp;			/* #Links up. */
-	int				PortsUp;			/* #Ports up. */
-	SK_U32			TimeoutValue;		/* RLMT timeout value. */
-
-	SK_U32			CheckingState;		/* Checking State. */
-	SK_RLMT_ROOT_ID	Root;				/* Root Bridge Id. */
-
-	SK_TIMER		LocTimer;			/* Timer struct. */
-	SK_TIMER		SegTimer;			/* Timer struct. */
-};
-
-
-typedef struct s_Rlmt {
-
-/* ----- Public part (read-only) ----- */
-
-	SK_U32			NumNets;			/* Number of nets. */
-	SK_U32			NetsStarted;		/* Number of nets started. */
-	SK_RLMT_NET		Net[SK_MAX_NETS];	/* Array of available nets. */
-	SK_RLMT_PORT	Port[SK_MAX_MACS];	/* Array of available ports. */
-
-/* ----- Private part ----- */
-	SK_BOOL			CheckSwitch;
-	SK_BOOL			RlmtOff;            /* set to zero if the Mac addresses 
-                                           are equal or the second one 
-                                           is zero */
-	SK_U16			Align01;
-
-} SK_RLMT;
-
-
-extern	SK_MAC_ADDR	BridgeMcAddr;
-extern	SK_MAC_ADDR	SkRlmtMcAddr;
-
-/* function prototypes ********************************************************/
-
-
-#ifndef SK_KR_PROTO
-
-/* Functions provided by SkRlmt */
-
-/* ANSI/C++ compliant function prototypes */
-
-extern	void	SkRlmtInit(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int		Level);
-
-extern	int	SkRlmtEvent(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	SK_U32		Event,
-	SK_EVPARA	Para);
-
-#else	/* defined(SK_KR_PROTO) */
-
-/* Non-ANSI/C++ compliant function prototypes */
-
-#error KR-style function prototypes are not yet provided.
-
-#endif	/* defined(SK_KR_PROTO)) */
-
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_SKRLMT_H */
diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h
deleted file mode 100644
index 04e6d7c1ec33..000000000000
--- a/drivers/net/sk98lin/h/sktimer.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/******************************************************************************
- *
- * Name:	sktimer.h
- * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
- * Version:	$Revision: 1.11 $
- * Date:	$Date: 2003/09/16 12:58:18 $
- * Purpose:	Defines for the timer functions
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKTIMER.H	contains all defines and types for the timer functions
- */
-
-#ifndef	_SKTIMER_H_
-#define _SKTIMER_H_
-
-#include "h/skqueue.h"
-
-/*
- * SK timer
- * - needed wherever a timer is used. Put this in your data structure
- *   wherever you want.
- */
-typedef	struct s_Timer SK_TIMER;
-
-struct s_Timer {
-	SK_TIMER	*TmNext;	/* linked list */
-	SK_U32		TmClass;	/* Timer Event class */
-	SK_U32		TmEvent;	/* Timer Event value */
-	SK_EVPARA	TmPara;		/* Timer Event parameter */
-	SK_U32		TmDelta;	/* delta time */
-	int			TmActive;	/* flag: active/inactive */
-};
-
-/*
- * Timer control struct.
- * - use in Adapters context name pAC->Tim
- */
-typedef	struct s_TimCtrl {
-	SK_TIMER	*StQueue;	/* Head of Timer queue */
-} SK_TIMCTRL;
-
-extern void SkTimerInit(SK_AC *pAC, SK_IOC Ioc, int Level);
-extern void SkTimerStop(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer);
-extern void SkTimerStart(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer,
-	SK_U32 Time, SK_U32 Class, SK_U32 Event, SK_EVPARA Para);
-extern void SkTimerDone(SK_AC *pAC, SK_IOC Ioc);
-#endif	/* _SKTIMER_H_ */
diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h
deleted file mode 100644
index 40edc96e1055..000000000000
--- a/drivers/net/sk98lin/h/sktypes.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/******************************************************************************
- *
- * Name:	sktypes.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.2 $
- * Date:	$Date: 2003/10/07 08:16:51 $
- * Purpose:	Define data types for Linux
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
- 
-/******************************************************************************
- *
- * Description:
- *
- * In this file, all data types that are needed by the common modules
- * are mapped to Linux data types.
- * 
- *
- * Include File Hierarchy:
- *
- *
- ******************************************************************************/
-
-#ifndef __INC_SKTYPES_H
-#define __INC_SKTYPES_H
-
-
-/* defines *******************************************************************/
-
-/*
- * Data types with a specific size. 'I' = signed, 'U' = unsigned.
- */
-#define SK_I8	s8
-#define SK_U8	u8
-#define SK_I16	s16
-#define SK_U16	u16
-#define SK_I32	s32
-#define SK_U32	u32
-#define SK_I64	s64
-#define SK_U64	u64
-
-#define SK_UPTR	ulong		/* casting pointer <-> integral */
-
-/*
-* Boolean type.
-*/
-#define SK_BOOL		SK_U8
-#define SK_FALSE	0
-#define SK_TRUE		(!SK_FALSE)
-
-/* typedefs *******************************************************************/
-
-/* function prototypes ********************************************************/
-
-#endif	/* __INC_SKTYPES_H */
diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h
deleted file mode 100644
index a1a7294828e5..000000000000
--- a/drivers/net/sk98lin/h/skversion.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/******************************************************************************
- *
- * Name:	version.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.5 $
- * Date:	$Date: 2003/10/07 08:16:51 $
- * Purpose:	SK specific Error log support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifdef	lint
-static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH.";
-static const char SysKonnectBuildNumber[] =
-	"@(#)SK-BUILD: 6.23 PL: 01"; 
-#endif	/* !defined(lint) */
-
-#define BOOT_STRING	"sk98lin: Network Device Driver v6.23\n" \
-			"(C)Copyright 1999-2004 Marvell(R)."
-
-#define VER_STRING	"6.23"
-#define DRIVER_FILE_NAME	"sk98lin"
-#define DRIVER_REL_DATE		"Feb-13-2004"
-
-
diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h
deleted file mode 100644
index fdd9e48e8040..000000000000
--- a/drivers/net/sk98lin/h/skvpd.h
+++ /dev/null
@@ -1,248 +0,0 @@
-/******************************************************************************
- *
- * Name:	skvpd.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.15 $
- * Date:	$Date: 2003/01/13 10:39:38 $
- * Purpose:	Defines and Macros for VPD handling
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * skvpd.h	contains Diagnostic specific defines for VPD handling
- */
-
-#ifndef __INC_SKVPD_H_
-#define __INC_SKVPD_H_
-
-/*
- * Define Resource Type Identifiers and VPD keywords
- */
-#define	RES_ID		0x82	/* Resource Type ID String (Product Name) */
-#define RES_VPD_R	0x90	/* start of VPD read only area */
-#define RES_VPD_W	0x91	/* start of VPD read/write area */
-#define RES_END		0x78	/* Resource Type End Tag */
-
-#ifndef VPD_NAME
-#define VPD_NAME	"Name"	/* Product Name, VPD name of RES_ID */
-#endif	/* VPD_NAME */
-#define VPD_PN		"PN"	/* Adapter Part Number */
-#define	VPD_EC		"EC"	/* Adapter Engineering Level */
-#define VPD_MN		"MN"	/* Manufacture ID */
-#define VPD_SN		"SN"	/* Serial Number */
-#define VPD_CP		"CP"	/* Extended Capability */
-#define VPD_RV		"RV"	/* Checksum and Reserved */
-#define	VPD_YA		"YA"	/* Asset Tag Identifier */
-#define VPD_VL		"VL"	/* First Error Log Message (SK specific) */
-#define VPD_VF		"VF"	/* Second Error Log Message (SK specific) */
-#define VPD_RW		"RW"	/* Remaining Read / Write Area */
-
-/* 'type' values for vpd_setup_para() */
-#define VPD_RO_KEY	1	/* RO keys are "PN", "EC", "MN", "SN", "RV" */
-#define VPD_RW_KEY	2	/* RW keys are "Yx", "Vx", and "RW" */
-
-/* 'op' values for vpd_setup_para() */
-#define	ADD_KEY		1	/* add the key at the pos "RV" or "RW" */
-#define OWR_KEY		2	/* overwrite key if already exists */
-
-/*
- * Define READ and WRITE Constants.
- */
-
-#define VPD_DEV_ID_GENESIS 	0x4300
-
-#define	VPD_SIZE_YUKON		256
-#define	VPD_SIZE_GENESIS	512
-#define	VPD_SIZE			512
-#define VPD_READ	0x0000
-#define VPD_WRITE	0x8000
-
-#define VPD_STOP(pAC,IoC)	VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE)
-
-#define VPD_GET_RES_LEN(p)	((unsigned int) \
-					(* (SK_U8 *)&(p)[1]) |\
-					((* (SK_U8 *)&(p)[2]) << 8))
-#define VPD_GET_VPD_LEN(p)	((unsigned int)(* (SK_U8 *)&(p)[2]))
-#define VPD_GET_VAL(p)		((char *)&(p)[3])
-
-#define VPD_MAX_LEN	50
-
-/* VPD status */
-	/* bit 7..1 reserved */
-#define VPD_VALID	(1<<0)	/* VPD data buffer, vpd_free_ro, */
-							/* and vpd_free_rw valid	 */
-
-/*
- * VPD structs
- */
-typedef	struct s_vpd_status {
-	unsigned short	Align01;			/* Alignment */
-	unsigned short	vpd_status;			/* VPD status, description see above */
-	int				vpd_free_ro;		/* unused bytes in read only area */
-	int				vpd_free_rw;		/* bytes available in read/write area */
-} SK_VPD_STATUS;
-
-typedef	struct s_vpd {
-	SK_VPD_STATUS	v;					/* VPD status structure */
-	char			vpd_buf[VPD_SIZE];	/* VPD buffer */
-	int				rom_size;			/* VPD ROM Size from PCI_OUR_REG_2 */
-	int				vpd_size;			/* saved VPD-size */
-} SK_VPD;
-
-typedef	struct s_vpd_para {
-	unsigned int	p_len;	/* parameter length */
-	char			*p_val;	/* points to the value */
-} SK_VPD_PARA;
-
-/*
- * structure of Large Resource Type Identifiers
- */
-
-/* was removed because of alignment problems */
-
-/*
- * structure of VPD keywords
- */
-typedef	struct s_vpd_key {
-	char			p_key[2];	/* 2 bytes ID string */
-	unsigned char	p_len;		/* 1 byte length */
-	char			p_val;		/* start of the value string */
-} SK_VPD_KEY;
-
-
-/*
- * System specific VPD macros
- */
-#ifndef SKDIAG
-#ifndef VPD_DO_IO
-#define VPD_OUT8(pAC,IoC,Addr,Val)	(void)SkPciWriteCfgByte(pAC,Addr,Val)
-#define VPD_OUT16(pAC,IoC,Addr,Val)	(void)SkPciWriteCfgWord(pAC,Addr,Val)
-#define VPD_IN8(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgByte(pAC,Addr,pVal)
-#define VPD_IN16(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgWord(pAC,Addr,pVal)
-#define VPD_IN32(pAC,IoC,Addr,pVal)	(void)SkPciReadCfgDWord(pAC,Addr,pVal)
-#else	/* VPD_DO_IO */
-#define VPD_OUT8(pAC,IoC,Addr,Val)	SK_OUT8(IoC,PCI_C(Addr),Val)
-#define VPD_OUT16(pAC,IoC,Addr,Val)	SK_OUT16(IoC,PCI_C(Addr),Val)
-#define VPD_IN8(pAC,IoC,Addr,pVal)	SK_IN8(IoC,PCI_C(Addr),pVal)
-#define VPD_IN16(pAC,IoC,Addr,pVal)	SK_IN16(IoC,PCI_C(Addr),pVal)
-#define VPD_IN32(pAC,IoC,Addr,pVal)	SK_IN32(IoC,PCI_C(Addr),pVal)
-#endif	/* VPD_DO_IO */
-#else	/* SKDIAG */
-#define VPD_OUT8(pAC,Ioc,Addr,Val) {			\
-		if ((pAC)->DgT.DgUseCfgCycle)			\
-			SkPciWriteCfgByte(pAC,Addr,Val);	\
-		else									\
-			SK_OUT8(pAC,PCI_C(Addr),Val);		\
-		}
-#define VPD_OUT16(pAC,Ioc,Addr,Val) {			\
-		if ((pAC)->DgT.DgUseCfgCycle)			\
-			SkPciWriteCfgWord(pAC,Addr,Val);	\
-		else						\
-			SK_OUT16(pAC,PCI_C(Addr),Val);		\
-		}
-#define VPD_IN8(pAC,Ioc,Addr,pVal) {			\
-		if ((pAC)->DgT.DgUseCfgCycle) 			\
-			SkPciReadCfgByte(pAC,Addr,pVal);	\
-		else						\
-			SK_IN8(pAC,PCI_C(Addr),pVal); 		\
-		}
-#define VPD_IN16(pAC,Ioc,Addr,pVal) {			\
-		if ((pAC)->DgT.DgUseCfgCycle) 			\
-			SkPciReadCfgWord(pAC,Addr,pVal);	\
-		else						\
-			SK_IN16(pAC,PCI_C(Addr),pVal); 		\
-		}
-#define VPD_IN32(pAC,Ioc,Addr,pVal) {			\
-		if ((pAC)->DgT.DgUseCfgCycle)			\
-			SkPciReadCfgDWord(pAC,Addr,pVal);	\
-		else						\
-			SK_IN32(pAC,PCI_C(Addr),pVal);		\
-		}
-#endif	/* nSKDIAG */
-
-/* function prototypes ********************************************************/
-
-#ifndef	SK_KR_PROTO
-#ifdef SKDIAG
-extern SK_U32	VpdReadDWord(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	int			addr);
-#endif	/* SKDIAG */
-
-extern SK_VPD_STATUS	*VpdStat(
-	SK_AC		*pAC,
-	SK_IOC		IoC);
-
-extern int	VpdKeys(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	char		*buf,
-	int			*len,
-	int			*elements);
-
-extern int	VpdRead(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	const char	*key,
-	char		*buf,
-	int			*len);
-
-extern SK_BOOL	VpdMayWrite(
-	char		*key);
-
-extern int	VpdWrite(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	const char	*key,
-	const char	*buf);
-
-extern int	VpdDelete(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	char		*key);
-
-extern int	VpdUpdate(
-	SK_AC		*pAC,
-	SK_IOC		IoC);
-
-#ifdef	SKDIAG
-extern int	VpdReadBlock(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	char		*buf,
-	int			addr,
-	int			len);
-
-extern int	VpdWriteBlock(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	char		*buf,
-	int			addr,
-	int			len);
-#endif	/* SKDIAG */
-#else	/* SK_KR_PROTO */
-extern SK_U32	VpdReadDWord();
-extern SK_VPD_STATUS	*VpdStat();
-extern int	VpdKeys();
-extern int	VpdRead();
-extern SK_BOOL	VpdMayWrite();
-extern int	VpdWrite();
-extern int	VpdDelete();
-extern int	VpdUpdate();
-#endif	/* SK_KR_PROTO */
-
-#endif	/* __INC_SKVPD_H_ */
diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
deleted file mode 100644
index 7f8e6d0084c7..000000000000
--- a/drivers/net/sk98lin/h/xmac_ii.h
+++ /dev/null
@@ -1,1579 +0,0 @@
-/******************************************************************************
- *
- * Name:	xmac_ii.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.52 $
- * Date:	$Date: 2003/10/02 16:35:50 $
- * Purpose:	Defines and Macros for Gigabit Ethernet Controller
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_XMAC_H
-#define __INC_XMAC_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* __cplusplus */
-
-/* defines ********************************************************************/
-
-/*
- * XMAC II registers
- *
- * The XMAC registers are 16 or 32 bits wide.
- * The XMACs host processor interface is set to 16 bit mode,
- * therefore ALL registers will be addressed with 16 bit accesses.
- *
- * The following macros are provided to access the XMAC registers
- * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(),
- * XM_INHASH(), and XM_OUTHASH().
- * The macros are defined in SkGeHw.h.
- *
- * Note:	NA reg	= Network Address e.g DA, SA etc.
- *
- */
-#define XM_MMU_CMD		0x0000	/* 16 bit r/w	MMU Command Register */
-	/* 0x0004:		reserved */
-#define XM_POFF			0x0008	/* 32 bit r/w	Packet Offset Register */
-#define XM_BURST		0x000c	/* 32 bit r/w	Burst Register for half duplex*/
-#define XM_1L_VLAN_TAG	0x0010	/* 16 bit r/w	One Level VLAN Tag ID */
-#define XM_2L_VLAN_TAG	0x0014	/* 16 bit r/w	Two Level VLAN Tag ID */
-	/* 0x0018 - 0x001e:	reserved */
-#define XM_TX_CMD		0x0020	/* 16 bit r/w	Transmit Command Register */
-#define XM_TX_RT_LIM	0x0024	/* 16 bit r/w	Transmit Retry Limit Register */
-#define XM_TX_STIME		0x0028	/* 16 bit r/w	Transmit Slottime Register */
-#define XM_TX_IPG		0x002c	/* 16 bit r/w	Transmit Inter Packet Gap */
-#define XM_RX_CMD		0x0030	/* 16 bit r/w	Receive Command Register */
-#define XM_PHY_ADDR		0x0034	/* 16 bit r/w	PHY Address Register */
-#define XM_PHY_DATA		0x0038	/* 16 bit r/w	PHY Data Register */
-	/* 0x003c: 		reserved */
-#define XM_GP_PORT		0x0040	/* 32 bit r/w	General Purpose Port Register */
-#define XM_IMSK			0x0044	/* 16 bit r/w	Interrupt Mask Register */
-#define XM_ISRC			0x0048	/* 16 bit r/o	Interrupt Status Register */
-#define XM_HW_CFG		0x004c	/* 16 bit r/w	Hardware Config Register */
-	/* 0x0050 - 0x005e:	reserved */
-#define XM_TX_LO_WM		0x0060	/* 16 bit r/w	Tx FIFO Low Water Mark */
-#define XM_TX_HI_WM		0x0062	/* 16 bit r/w	Tx FIFO High Water Mark */
-#define XM_TX_THR		0x0064	/* 16 bit r/w	Tx Request Threshold */
-#define XM_HT_THR		0x0066	/* 16 bit r/w	Host Request Threshold */
-#define XM_PAUSE_DA		0x0068	/* NA reg r/w	Pause Destination Address */
-	/* 0x006e: 		reserved */
-#define XM_CTL_PARA		0x0070	/* 32 bit r/w	Control Parameter Register */
-#define XM_MAC_OPCODE	0x0074	/* 16 bit r/w	Opcode for MAC control frames */
-#define XM_MAC_PTIME	0x0076	/* 16 bit r/w	Pause time for MAC ctrl frames*/
-#define XM_TX_STAT		0x0078	/* 32 bit r/o	Tx Status LIFO Register */
-
-	/* 0x0080 - 0x00fc:	16 NA reg r/w	Exact Match Address Registers */
-	/* 				use the XM_EXM() macro to address */
-#define XM_EXM_START	0x0080	/* r/w	Start Address of the EXM Regs */
-
-	/*
-	 * XM_EXM(Reg)
-	 *
-	 * returns the XMAC address offset of specified Exact Match Addr Reg
-	 *
-	 * para:	Reg	EXM register to addr	(0 .. 15)
-	 *
-	 * usage:	XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]);
-	 */
-#define XM_EXM(Reg)	(XM_EXM_START + ((Reg) << 3))
-
-#define XM_SRC_CHK		0x0100	/* NA reg r/w	Source Check Address Register */
-#define XM_SA			0x0108	/* NA reg r/w	Station Address Register */
-#define XM_HSM			0x0110	/* 64 bit r/w	Hash Match Address Registers */
-#define XM_RX_LO_WM		0x0118	/* 16 bit r/w	Receive Low Water Mark */
-#define XM_RX_HI_WM		0x011a	/* 16 bit r/w	Receive High Water Mark */
-#define XM_RX_THR		0x011c	/* 32 bit r/w	Receive Request Threshold */
-#define XM_DEV_ID		0x0120	/* 32 bit r/o	Device ID Register */
-#define XM_MODE			0x0124	/* 32 bit r/w	Mode Register */
-#define XM_LSA			0x0128	/* NA reg r/o	Last Source Register */
-	/* 0x012e:		reserved */
-#define XM_TS_READ		0x0130	/* 32 bit r/o	Time Stamp Read Register */
-#define XM_TS_LOAD		0x0134	/* 32 bit r/o	Time Stamp Load Value */
-	/* 0x0138 - 0x01fe:	reserved */
-#define XM_STAT_CMD	0x0200	/* 16 bit r/w	Statistics Command Register */
-#define XM_RX_CNT_EV	0x0204	/* 32 bit r/o	Rx Counter Event Register */
-#define XM_TX_CNT_EV	0x0208	/* 32 bit r/o	Tx Counter Event Register */
-#define XM_RX_EV_MSK	0x020c	/* 32 bit r/w	Rx Counter Event Mask */
-#define XM_TX_EV_MSK	0x0210	/* 32 bit r/w	Tx Counter Event Mask */
-	/* 0x0204 - 0x027e:	reserved */
-#define XM_TXF_OK		0x0280	/* 32 bit r/o	Frames Transmitted OK Conuter */
-#define XM_TXO_OK_HI	0x0284	/* 32 bit r/o	Octets Transmitted OK High Cnt*/
-#define XM_TXO_OK_LO	0x0288	/* 32 bit r/o	Octets Transmitted OK Low Cnt */
-#define XM_TXF_BC_OK	0x028c	/* 32 bit r/o	Broadcast Frames Xmitted OK */
-#define XM_TXF_MC_OK	0x0290	/* 32 bit r/o	Multicast Frames Xmitted OK */
-#define XM_TXF_UC_OK	0x0294	/* 32 bit r/o	Unicast Frames Xmitted OK */
-#define XM_TXF_LONG		0x0298	/* 32 bit r/o	Tx Long Frame Counter */
-#define XM_TXE_BURST	0x029c	/* 32 bit r/o	Tx Burst Event Counter */
-#define XM_TXF_MPAUSE	0x02a0	/* 32 bit r/o	Tx Pause MAC Ctrl Frame Cnt */
-#define XM_TXF_MCTRL	0x02a4	/* 32 bit r/o	Tx MAC Ctrl Frame Counter */
-#define XM_TXF_SNG_COL	0x02a8	/* 32 bit r/o	Tx Single Collision Counter */
-#define XM_TXF_MUL_COL	0x02ac	/* 32 bit r/o	Tx Multiple Collision Counter */
-#define XM_TXF_ABO_COL	0x02b0	/* 32 bit r/o	Tx aborted due to Exces. Col. */
-#define XM_TXF_LAT_COL	0x02b4	/* 32 bit r/o	Tx Late Collision Counter */
-#define XM_TXF_DEF		0x02b8	/* 32 bit r/o	Tx Deferred Frame Counter */
-#define XM_TXF_EX_DEF	0x02bc	/* 32 bit r/o	Tx Excessive Deferall Counter */
-#define XM_TXE_FIFO_UR	0x02c0	/* 32 bit r/o	Tx FIFO Underrun Event Cnt */
-#define XM_TXE_CS_ERR	0x02c4	/* 32 bit r/o	Tx Carrier Sense Error Cnt */
-#define XM_TXP_UTIL		0x02c8	/* 32 bit r/o	Tx Utilization in % */
-	/* 0x02cc - 0x02ce:	reserved */
-#define XM_TXF_64B		0x02d0	/* 32 bit r/o	64 Byte Tx Frame Counter */
-#define XM_TXF_127B		0x02d4	/* 32 bit r/o	65-127 Byte Tx Frame Counter */
-#define XM_TXF_255B		0x02d8	/* 32 bit r/o	128-255 Byte Tx Frame Counter */
-#define XM_TXF_511B		0x02dc	/* 32 bit r/o	256-511 Byte Tx Frame Counter */
-#define XM_TXF_1023B	0x02e0	/* 32 bit r/o	512-1023 Byte Tx Frame Counter*/
-#define XM_TXF_MAX_SZ	0x02e4	/* 32 bit r/o	1024-MaxSize Byte Tx Frame Cnt*/
-	/* 0x02e8 - 0x02fe:	reserved */
-#define XM_RXF_OK		0x0300	/* 32 bit r/o	Frames Received OK */
-#define XM_RXO_OK_HI	0x0304	/* 32 bit r/o	Octets Received OK High Cnt */
-#define XM_RXO_OK_LO	0x0308	/* 32 bit r/o	Octets Received OK Low Counter*/
-#define XM_RXF_BC_OK	0x030c	/* 32 bit r/o	Broadcast Frames Received OK */
-#define XM_RXF_MC_OK	0x0310	/* 32 bit r/o	Multicast Frames Received OK */
-#define XM_RXF_UC_OK	0x0314	/* 32 bit r/o	Unicast Frames Received OK */
-#define XM_RXF_MPAUSE	0x0318	/* 32 bit r/o	Rx Pause MAC Ctrl Frame Cnt */
-#define XM_RXF_MCTRL	0x031c	/* 32 bit r/o	Rx MAC Ctrl Frame Counter */
-#define XM_RXF_INV_MP	0x0320	/* 32 bit r/o	Rx invalid Pause Frame Cnt */
-#define XM_RXF_INV_MOC	0x0324	/* 32 bit r/o	Rx Frames with inv. MAC Opcode*/
-#define XM_RXE_BURST	0x0328	/* 32 bit r/o	Rx Burst Event Counter */
-#define XM_RXE_FMISS	0x032c	/* 32 bit r/o	Rx Missed Frames Event Cnt */
-#define XM_RXF_FRA_ERR	0x0330	/* 32 bit r/o	Rx Framing Error Counter */
-#define XM_RXE_FIFO_OV	0x0334	/* 32 bit r/o	Rx FIFO overflow Event Cnt */
-#define XM_RXF_JAB_PKT	0x0338	/* 32 bit r/o	Rx Jabber Packet Frame Cnt */
-#define XM_RXE_CAR_ERR	0x033c	/* 32 bit r/o	Rx Carrier Event Error Cnt */
-#define XM_RXF_LEN_ERR	0x0340	/* 32 bit r/o	Rx in Range Length Error */
-#define XM_RXE_SYM_ERR	0x0344	/* 32 bit r/o	Rx Symbol Error Counter */
-#define XM_RXE_SHT_ERR	0x0348	/* 32 bit r/o	Rx Short Event Error Cnt */
-#define XM_RXE_RUNT		0x034c	/* 32 bit r/o	Rx Runt Event Counter */
-#define XM_RXF_LNG_ERR	0x0350	/* 32 bit r/o	Rx Frame too Long Error Cnt */
-#define XM_RXF_FCS_ERR	0x0354	/* 32 bit r/o	Rx Frame Check Seq. Error Cnt */
-	/* 0x0358 - 0x035a:	reserved */
-#define XM_RXF_CEX_ERR	0x035c	/* 32 bit r/o	Rx Carrier Ext Error Frame Cnt*/
-#define XM_RXP_UTIL		0x0360	/* 32 bit r/o	Rx Utilization in % */
-	/* 0x0364 - 0x0366:	reserved */
-#define XM_RXF_64B		0x0368	/* 32 bit r/o	64 Byte Rx Frame Counter */
-#define XM_RXF_127B		0x036c	/* 32 bit r/o	65-127 Byte Rx Frame Counter */
-#define XM_RXF_255B		0x0370	/* 32 bit r/o	128-255 Byte Rx Frame Counter */
-#define XM_RXF_511B		0x0374	/* 32 bit r/o	256-511 Byte Rx Frame Counter */
-#define XM_RXF_1023B	0x0378	/* 32 bit r/o	512-1023 Byte Rx Frame Counter*/
-#define XM_RXF_MAX_SZ	0x037c	/* 32 bit r/o	1024-MaxSize Byte Rx Frame Cnt*/
-	/* 0x02e8 - 0x02fe:	reserved */
-
-
-/*----------------------------------------------------------------------------*/
-/*
- * XMAC Bit Definitions
- *
- * If the bit access behaviour differs from the register access behaviour
- * (r/w, r/o) this is documented after the bit number.
- * The following bit access behaviours are used:
- *	(sc)	self clearing
- *	(ro)	read only
- */
-
-/*	XM_MMU_CMD	16 bit r/w	MMU Command Register */
-								/* Bit 15..13:	reserved */
-#define XM_MMU_PHY_RDY	(1<<12)	/* Bit 12:	PHY Read Ready */
-#define XM_MMU_PHY_BUSY	(1<<11)	/* Bit 11:	PHY Busy */
-#define XM_MMU_IGN_PF	(1<<10)	/* Bit 10:	Ignore Pause Frame */
-#define XM_MMU_MAC_LB	(1<<9)	/* Bit  9:	Enable MAC Loopback */
-								/* Bit  8:	reserved */
-#define XM_MMU_FRC_COL	(1<<7)	/* Bit  7:	Force Collision */
-#define XM_MMU_SIM_COL	(1<<6)	/* Bit  6:	Simulate Collision */
-#define XM_MMU_NO_PRE	(1<<5)	/* Bit  5:	No MDIO Preamble */
-#define XM_MMU_GMII_FD	(1<<4)	/* Bit  4:	GMII uses Full Duplex */
-#define XM_MMU_RAT_CTRL	(1<<3)	/* Bit  3:	Enable Rate Control */
-#define XM_MMU_GMII_LOOP (1<<2)	/* Bit  2:	PHY is in Loopback Mode */
-#define XM_MMU_ENA_RX	(1<<1)	/* Bit  1:	Enable Receiver */
-#define XM_MMU_ENA_TX	(1<<0)	/* Bit  0:	Enable Transmitter */
-
-
-/*	XM_TX_CMD	16 bit r/w	Transmit Command Register */
-								/* Bit 15..7:	reserved */
-#define XM_TX_BK2BK		(1<<6)	/* Bit  6:	Ignor Carrier Sense (Tx Bk2Bk)*/
-#define XM_TX_ENC_BYP	(1<<5)	/* Bit  5:	Set Encoder in Bypass Mode */
-#define XM_TX_SAM_LINE	(1<<4)	/* Bit  4: (sc)	Start utilization calculation */
-#define XM_TX_NO_GIG_MD	(1<<3)	/* Bit  3:	Disable Carrier Extension */
-#define XM_TX_NO_PRE	(1<<2)	/* Bit  2:	Disable Preamble Generation */
-#define XM_TX_NO_CRC	(1<<1)	/* Bit  1:	Disable CRC Generation */
-#define XM_TX_AUTO_PAD	(1<<0)	/* Bit  0:	Enable Automatic Padding */
-
-
-/*	XM_TX_RT_LIM	16 bit r/w	Transmit Retry Limit Register */
-								/* Bit 15..5:	reserved */
-#define XM_RT_LIM_MSK	0x1f	/* Bit  4..0:	Tx Retry Limit */
-
-
-/*	XM_TX_STIME	16 bit r/w	Transmit Slottime Register */
-								/* Bit 15..7:	reserved */
-#define XM_STIME_MSK	0x7f	/* Bit  6..0:	Tx Slottime bits */
-
-
-/*	XM_TX_IPG	16 bit r/w	Transmit Inter Packet Gap */
-								/* Bit 15..8:	reserved */
-#define XM_IPG_MSK		0xff	/* Bit  7..0:	IPG value bits */
-
-
-/*	XM_RX_CMD	16 bit r/w	Receive Command Register */
-								/* Bit 15..9:	reserved */
-#define XM_RX_LENERR_OK (1<<8)	/* Bit  8	don't set Rx Err bit for */
-								/*		inrange error packets */
-#define XM_RX_BIG_PK_OK	(1<<7)	/* Bit  7	don't set Rx Err bit for */
-								/*		jumbo packets */
-#define XM_RX_IPG_CAP	(1<<6)	/* Bit  6	repl. type field with IPG */
-#define XM_RX_TP_MD		(1<<5)	/* Bit  5:	Enable transparent Mode */
-#define XM_RX_STRIP_FCS	(1<<4)	/* Bit  4:	Enable FCS Stripping */
-#define XM_RX_SELF_RX	(1<<3)	/* Bit  3: 	Enable Rx of own packets */
-#define XM_RX_SAM_LINE	(1<<2)	/* Bit  2: (sc)	Start utilization calculation */
-#define XM_RX_STRIP_PAD	(1<<1)	/* Bit  1:	Strip pad bytes of Rx frames */
-#define XM_RX_DIS_CEXT	(1<<0)	/* Bit  0:	Disable carrier ext. check */
-
-
-/*	XM_PHY_ADDR	16 bit r/w	PHY Address Register */
-								/* Bit 15..5:	reserved */
-#define XM_PHY_ADDR_SZ	0x1f	/* Bit  4..0:	PHY Address bits */
-
-
-/*	XM_GP_PORT	32 bit r/w	General Purpose Port Register */
-								/* Bit 31..7:	reserved */
-#define XM_GP_ANIP		(1L<<6)	/* Bit  6: (ro)	Auto-Neg. in progress */
-#define XM_GP_FRC_INT	(1L<<5)	/* Bit  5: (sc)	Force Interrupt */
-								/* Bit  4:	reserved */
-#define XM_GP_RES_MAC	(1L<<3)	/* Bit  3: (sc)	Reset MAC and FIFOs */
-#define XM_GP_RES_STAT	(1L<<2)	/* Bit  2: (sc)	Reset the statistics module */
-								/* Bit  1:	reserved */
-#define XM_GP_INP_ASS	(1L<<0)	/* Bit  0: (ro) GP Input Pin asserted */
-
-
-/*	XM_IMSK		16 bit r/w	Interrupt Mask Register */
-/*	XM_ISRC		16 bit r/o	Interrupt Status Register */
-								/* Bit 15:	reserved */
-#define XM_IS_LNK_AE	(1<<14) /* Bit 14:	Link Asynchronous Event */
-#define XM_IS_TX_ABORT	(1<<13) /* Bit 13:	Transmit Abort, late Col. etc */
-#define XM_IS_FRC_INT	(1<<12) /* Bit 12:	Force INT bit set in GP */
-#define XM_IS_INP_ASS	(1<<11)	/* Bit 11:	Input Asserted, GP bit 0 set */
-#define XM_IS_LIPA_RC	(1<<10)	/* Bit 10:	Link Partner requests config */
-#define XM_IS_RX_PAGE	(1<<9)	/* Bit  9:	Page Received */
-#define XM_IS_TX_PAGE	(1<<8)	/* Bit  8:	Next Page Loaded for Transmit */
-#define XM_IS_AND		(1<<7)	/* Bit  7:	Auto-Negotiation Done */
-#define XM_IS_TSC_OV	(1<<6)	/* Bit  6:	Time Stamp Counter Overflow */
-#define XM_IS_RXC_OV	(1<<5)	/* Bit  5:	Rx Counter Event Overflow */
-#define XM_IS_TXC_OV	(1<<4)	/* Bit  4:	Tx Counter Event Overflow */
-#define XM_IS_RXF_OV	(1<<3)	/* Bit  3:	Receive FIFO Overflow */
-#define XM_IS_TXF_UR	(1<<2)	/* Bit  2:	Transmit FIFO Underrun */
-#define XM_IS_TX_COMP	(1<<1)	/* Bit  1:	Frame Tx Complete */
-#define XM_IS_RX_COMP	(1<<0)	/* Bit  0:	Frame Rx Complete */
-
-#define XM_DEF_MSK	(~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\
-			XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR))
-
-
-/*	XM_HW_CFG	16 bit r/w	Hardware Config Register */
-								/* Bit 15.. 4:	reserved */
-#define XM_HW_GEN_EOP	(1<<3)	/* Bit  3:	generate End of Packet pulse */
-#define XM_HW_COM4SIG	(1<<2)	/* Bit  2:	use Comma Detect for Sig. Det.*/
-								/* Bit  1:	reserved */
-#define XM_HW_GMII_MD	(1<<0)	/* Bit  0:	GMII Interface selected */
-
-
-/*	XM_TX_LO_WM	16 bit r/w	Tx FIFO Low Water Mark */
-/*	XM_TX_HI_WM	16 bit r/w	Tx FIFO High Water Mark */
-								/* Bit 15..10	reserved */
-#define XM_TX_WM_MSK	0x01ff	/* Bit  9.. 0	Tx FIFO Watermark bits */
-
-/*	XM_TX_THR	16 bit r/w	Tx Request Threshold */
-/*	XM_HT_THR	16 bit r/w	Host Request Threshold */
-/*	XM_RX_THR	16 bit r/w	Rx Request Threshold */
-								/* Bit 15..11	reserved */
-#define XM_THR_MSK		0x03ff	/* Bit 10.. 0	Rx/Tx Request Threshold bits */
-
-
-/*	XM_TX_STAT	32 bit r/o	Tx Status LIFO Register */
-#define XM_ST_VALID		(1UL<<31)	/* Bit 31:	Status Valid */
-#define XM_ST_BYTE_CNT	(0x3fffL<<17)	/* Bit 30..17:	Tx frame Length */
-#define XM_ST_RETRY_CNT	(0x1fL<<12)	/* Bit 16..12:	Retry Count */
-#define XM_ST_EX_COL	(1L<<11)	/* Bit 11:	Excessive Collisions */
-#define XM_ST_EX_DEF	(1L<<10)	/* Bit 10:	Excessive Deferral */
-#define XM_ST_BURST		(1L<<9)		/* Bit  9:	p. xmitted in burst md*/
-#define XM_ST_DEFER		(1L<<8)		/* Bit  8:	packet was defered */
-#define XM_ST_BC		(1L<<7)		/* Bit  7:	Broadcast packet */
-#define XM_ST_MC		(1L<<6)		/* Bit  6:	Multicast packet */
-#define XM_ST_UC		(1L<<5)		/* Bit  5:	Unicast packet */
-#define XM_ST_TX_UR		(1L<<4)		/* Bit  4:	FIFO Underrun occured */
-#define XM_ST_CS_ERR	(1L<<3)		/* Bit  3:	Carrier Sense Error */
-#define XM_ST_LAT_COL	(1L<<2)		/* Bit  2:	Late Collision Error */
-#define XM_ST_MUL_COL	(1L<<1)		/* Bit  1:	Multiple Collisions */
-#define XM_ST_SGN_COL	(1L<<0)		/* Bit  0:	Single Collision */
-
-/*	XM_RX_LO_WM	16 bit r/w	Receive Low Water Mark */
-/*	XM_RX_HI_WM	16 bit r/w	Receive High Water Mark */
-									/* Bit 15..11:	reserved */
-#define XM_RX_WM_MSK	0x03ff		/* Bit 11.. 0:	Rx FIFO Watermark bits */
-
-
-/*	XM_DEV_ID	32 bit r/o	Device ID Register */
-#define XM_DEV_OUI	(0x00ffffffUL<<8)	/* Bit 31..8:	Device OUI */
-#define XM_DEV_REV	(0x07L << 5)		/* Bit  7..5:	Chip Rev Num */
-
-
-/*	XM_MODE		32 bit r/w	Mode Register */
-									/* Bit 31..27:	reserved */
-#define XM_MD_ENA_REJ	(1L<<26)	/* Bit 26:	Enable Frame Reject */
-#define XM_MD_SPOE_E	(1L<<25)	/* Bit 25:	Send Pause on Edge */
-									/* 		extern generated */
-#define XM_MD_TX_REP	(1L<<24)	/* Bit 24:	Transmit Repeater Mode */
-#define XM_MD_SPOFF_I	(1L<<23)	/* Bit 23:	Send Pause on FIFO full */
-									/*		intern generated */
-#define XM_MD_LE_STW	(1L<<22)	/* Bit 22:	Rx Stat Word in Little Endian */
-#define XM_MD_TX_CONT	(1L<<21)	/* Bit 21:	Send Continuous */
-#define XM_MD_TX_PAUSE	(1L<<20)	/* Bit 20: (sc)	Send Pause Frame */
-#define XM_MD_ATS		(1L<<19)	/* Bit 19:	Append Time Stamp */
-#define XM_MD_SPOL_I	(1L<<18)	/* Bit 18:	Send Pause on Low */
-									/*		intern generated */
-#define XM_MD_SPOH_I	(1L<<17)	/* Bit 17:	Send Pause on High */
-									/*		intern generated */
-#define XM_MD_CAP		(1L<<16)	/* Bit 16:	Check Address Pair */
-#define XM_MD_ENA_HASH	(1L<<15)	/* Bit 15:	Enable Hashing */
-#define XM_MD_CSA		(1L<<14)	/* Bit 14:	Check Station Address */
-#define XM_MD_CAA		(1L<<13)	/* Bit 13:	Check Address Array */
-#define XM_MD_RX_MCTRL	(1L<<12)	/* Bit 12:	Rx MAC Control Frame */
-#define XM_MD_RX_RUNT	(1L<<11)	/* Bit 11:	Rx Runt Frames */
-#define XM_MD_RX_IRLE	(1L<<10)	/* Bit 10:	Rx in Range Len Err Frame */
-#define XM_MD_RX_LONG	(1L<<9)		/* Bit  9:	Rx Long Frame */
-#define XM_MD_RX_CRCE	(1L<<8)		/* Bit  8:	Rx CRC Error Frame */
-#define XM_MD_RX_ERR	(1L<<7)		/* Bit  7:	Rx Error Frame */
-#define XM_MD_DIS_UC	(1L<<6)		/* Bit  6:	Disable Rx Unicast */
-#define XM_MD_DIS_MC	(1L<<5)		/* Bit  5:	Disable Rx Multicast */
-#define XM_MD_DIS_BC	(1L<<4)		/* Bit  4:	Disable Rx Broadcast */
-#define XM_MD_ENA_PROM	(1L<<3)		/* Bit  3:	Enable Promiscuous */
-#define XM_MD_ENA_BE	(1L<<2)		/* Bit  2:	Enable Big Endian */
-#define XM_MD_FTF		(1L<<1)		/* Bit  1: (sc)	Flush Tx FIFO */
-#define XM_MD_FRF		(1L<<0)		/* Bit  0: (sc)	Flush Rx FIFO */
-
-#define XM_PAUSE_MODE	(XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
-#define XM_DEF_MODE		(XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
-				XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
-
-/*	XM_STAT_CMD	16 bit r/w	Statistics Command Register */
-								/* Bit 16..6:	reserved */
-#define XM_SC_SNP_RXC	(1<<5)	/* Bit  5: (sc)	Snap Rx Counters */
-#define XM_SC_SNP_TXC	(1<<4)	/* Bit  4: (sc)	Snap Tx Counters */
-#define XM_SC_CP_RXC	(1<<3)	/* Bit  3: 	Copy Rx Counters Continuously */
-#define XM_SC_CP_TXC	(1<<2)	/* Bit  2:	Copy Tx Counters Continuously */
-#define XM_SC_CLR_RXC	(1<<1)	/* Bit  1: (sc)	Clear Rx Counters */
-#define XM_SC_CLR_TXC	(1<<0)	/* Bit  0: (sc) Clear Tx Counters */
-
-
-/*	XM_RX_CNT_EV	32 bit r/o	Rx Counter Event Register */
-/*	XM_RX_EV_MSK	32 bit r/w	Rx Counter Event Mask */
-#define XMR_MAX_SZ_OV	(1UL<<31)	/* Bit 31:	1024-MaxSize Rx Cnt Ov*/
-#define XMR_1023B_OV	(1L<<30)	/* Bit 30:	512-1023Byte Rx Cnt Ov*/
-#define XMR_511B_OV		(1L<<29)	/* Bit 29:	256-511 Byte Rx Cnt Ov*/
-#define XMR_255B_OV		(1L<<28)	/* Bit 28:	128-255 Byte Rx Cnt Ov*/
-#define XMR_127B_OV		(1L<<27)	/* Bit 27:	65-127 Byte Rx Cnt Ov */
-#define XMR_64B_OV		(1L<<26)	/* Bit 26:	64 Byte Rx Cnt Ov */
-#define XMR_UTIL_OV		(1L<<25)	/* Bit 25:	Rx Util Cnt Overflow */
-#define XMR_UTIL_UR		(1L<<24)	/* Bit 24:	Rx Util Cnt Underrun */
-#define XMR_CEX_ERR_OV	(1L<<23)	/* Bit 23:	CEXT Err Cnt Ov */
-									/* Bit 22:	reserved */
-#define XMR_FCS_ERR_OV	(1L<<21)	/* Bit 21:	Rx FCS Error Cnt Ov */
-#define XMR_LNG_ERR_OV	(1L<<20)	/* Bit 20:	Rx too Long Err Cnt Ov*/
-#define XMR_RUNT_OV		(1L<<19)	/* Bit 19:	Runt Event Cnt Ov */
-#define XMR_SHT_ERR_OV	(1L<<18)	/* Bit 18:	Rx Short Ev Err Cnt Ov*/
-#define XMR_SYM_ERR_OV	(1L<<17)	/* Bit 17:	Rx Sym Err Cnt Ov */
-									/* Bit 16:	reserved */
-#define XMR_CAR_ERR_OV	(1L<<15)	/* Bit 15:	Rx Carr Ev Err Cnt Ov */
-#define XMR_JAB_PKT_OV	(1L<<14)	/* Bit 14:	Rx Jabb Packet Cnt Ov */
-#define XMR_FIFO_OV		(1L<<13)	/* Bit 13:	Rx FIFO Ov Ev Cnt Ov */
-#define XMR_FRA_ERR_OV	(1L<<12)	/* Bit 12:	Rx Framing Err Cnt Ov */
-#define XMR_FMISS_OV	(1L<<11)	/* Bit 11:	Rx Missed Ev Cnt Ov */
-#define XMR_BURST		(1L<<10)	/* Bit 10:	Rx Burst Event Cnt Ov */
-#define XMR_INV_MOC		(1L<<9)		/* Bit  9:	Rx with inv. MAC OC Ov*/
-#define XMR_INV_MP		(1L<<8)		/* Bit  8:	Rx inv Pause Frame Ov */
-#define XMR_MCTRL_OV	(1L<<7)		/* Bit  7:	Rx MAC Ctrl-F Cnt Ov */
-#define XMR_MPAUSE_OV	(1L<<6)		/* Bit  6:	Rx Pause MAC Ctrl-F Ov*/
-#define XMR_UC_OK_OV	(1L<<5)		/* Bit  5:	Rx Unicast Frame CntOv*/
-#define XMR_MC_OK_OV	(1L<<4)		/* Bit  4:	Rx Multicast Cnt Ov */
-#define XMR_BC_OK_OV	(1L<<3)		/* Bit  3:	Rx Broadcast Cnt Ov */
-#define XMR_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Rx OK Low CntOv*/
-#define XMR_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Rx OK Hi Cnt Ov*/
-#define XMR_OK_OV		(1L<<0)		/* Bit  0:	Frames Received Ok Ov */
-
-#define XMR_DEF_MSK		(XMR_OK_LO_OV | XMR_OK_HI_OV)
-
-/*	XM_TX_CNT_EV	32 bit r/o	Tx Counter Event Register */
-/*	XM_TX_EV_MSK	32 bit r/w	Tx Counter Event Mask */
-									/* Bit 31..26:	reserved */
-#define XMT_MAX_SZ_OV	(1L<<25)	/* Bit 25:	1024-MaxSize Tx Cnt Ov*/
-#define XMT_1023B_OV	(1L<<24)	/* Bit 24:	512-1023Byte Tx Cnt Ov*/
-#define XMT_511B_OV		(1L<<23)	/* Bit 23:	256-511 Byte Tx Cnt Ov*/
-#define XMT_255B_OV		(1L<<22)	/* Bit 22:	128-255 Byte Tx Cnt Ov*/
-#define XMT_127B_OV		(1L<<21)	/* Bit 21:	65-127 Byte Tx Cnt Ov */
-#define XMT_64B_OV		(1L<<20)	/* Bit 20:	64 Byte Tx Cnt Ov */
-#define XMT_UTIL_OV		(1L<<19)	/* Bit 19:	Tx Util Cnt Overflow */
-#define XMT_UTIL_UR		(1L<<18)	/* Bit 18:	Tx Util Cnt Underrun */
-#define XMT_CS_ERR_OV	(1L<<17)	/* Bit 17:	Tx Carr Sen Err Cnt Ov*/
-#define XMT_FIFO_UR_OV	(1L<<16)	/* Bit 16:	Tx FIFO Ur Ev Cnt Ov */
-#define XMT_EX_DEF_OV	(1L<<15)	/* Bit 15:	Tx Ex Deferall Cnt Ov */
-#define XMT_DEF			(1L<<14)	/* Bit 14:	Tx Deferred Cnt Ov */
-#define XMT_LAT_COL_OV	(1L<<13)	/* Bit 13:	Tx Late Col Cnt Ov */
-#define XMT_ABO_COL_OV	(1L<<12)	/* Bit 12:	Tx abo dueto Ex Col Ov*/
-#define XMT_MUL_COL_OV	(1L<<11)	/* Bit 11:	Tx Mult Col Cnt Ov */
-#define XMT_SNG_COL		(1L<<10)	/* Bit 10:	Tx Single Col Cnt Ov */
-#define XMT_MCTRL_OV	(1L<<9)		/* Bit  9:	Tx MAC Ctrl Counter Ov*/
-#define XMT_MPAUSE		(1L<<8)		/* Bit  8:	Tx Pause MAC Ctrl-F Ov*/
-#define XMT_BURST		(1L<<7)		/* Bit  7:	Tx Burst Event Cnt Ov */
-#define XMT_LONG		(1L<<6)		/* Bit  6:	Tx Long Frame Cnt Ov */
-#define XMT_UC_OK_OV	(1L<<5)		/* Bit  5:	Tx Unicast Cnt Ov */
-#define XMT_MC_OK_OV	(1L<<4)		/* Bit  4:	Tx Multicast Cnt Ov */
-#define XMT_BC_OK_OV	(1L<<3)		/* Bit  3:	Tx Broadcast Cnt Ov */
-#define XMT_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Tx OK Low CntOv*/
-#define XMT_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Tx OK Hi Cnt Ov*/
-#define XMT_OK_OV		(1L<<0)		/* Bit  0:	Frames Tx Ok Ov */
-
-#define XMT_DEF_MSK		(XMT_OK_LO_OV | XMT_OK_HI_OV)
-
-/*
- * Receive Frame Status Encoding
- */
-#define XMR_FS_LEN	(0x3fffUL<<18)	/* Bit 31..18:	Rx Frame Length */
-#define XMR_FS_2L_VLAN	(1L<<17)	/* Bit 17:	tagged wh 2Lev VLAN ID*/
-#define XMR_FS_1L_VLAN	(1L<<16)	/* Bit 16:	tagged wh 1Lev VLAN ID*/
-#define XMR_FS_BC		(1L<<15)	/* Bit 15:	Broadcast Frame */
-#define XMR_FS_MC		(1L<<14)	/* Bit 14:	Multicast Frame */
-#define XMR_FS_UC		(1L<<13)	/* Bit 13:	Unicast Frame */
-									/* Bit 12:	reserved */
-#define XMR_FS_BURST	(1L<<11)	/* Bit 11:	Burst Mode */
-#define XMR_FS_CEX_ERR	(1L<<10)	/* Bit 10:	Carrier Ext. Error */
-#define XMR_FS_802_3	(1L<<9)		/* Bit  9:	802.3 Frame */
-#define XMR_FS_COL_ERR	(1L<<8)		/* Bit  8:	Collision Error */
-#define XMR_FS_CAR_ERR	(1L<<7)		/* Bit  7:	Carrier Event Error */
-#define XMR_FS_LEN_ERR	(1L<<6)		/* Bit  6:	In-Range Length Error */
-#define XMR_FS_FRA_ERR	(1L<<5)		/* Bit  5:	Framing Error */
-#define XMR_FS_RUNT		(1L<<4)		/* Bit  4:	Runt Frame */
-#define XMR_FS_LNG_ERR	(1L<<3)		/* Bit  3:	Giant (Jumbo) Frame */
-#define XMR_FS_FCS_ERR	(1L<<2)		/* Bit  2:	Frame Check Sequ Err */
-#define XMR_FS_ERR		(1L<<1)		/* Bit  1:	Frame Error */
-#define XMR_FS_MCTRL	(1L<<0)		/* Bit  0:	MAC Control Packet */
-
-/*
- * XMR_FS_ERR will be set if
- *	XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
- *	XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
- * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
- * XMR_FS_ERR unless the corresponding bit in the Receive Command
- * Register is set.
- */
-#define XMR_FS_ANY_ERR	XMR_FS_ERR
-
-/*----------------------------------------------------------------------------*/
-/*
- * XMAC-PHY Registers, indirect addressed over the XMAC
- */
-#define PHY_XMAC_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
-#define PHY_XMAC_STAT		0x01	/* 16 bit r/w	PHY Status Register */
-#define PHY_XMAC_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
-#define PHY_XMAC_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
-#define PHY_XMAC_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
-#define PHY_XMAC_AUNE_LP	0x05	/* 16 bit r/o	Link Partner Abi Reg */
-#define PHY_XMAC_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
-#define PHY_XMAC_NEPG		0x07	/* 16 bit r/w	Next Page Register */
-#define PHY_XMAC_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
-	/* 0x09 - 0x0e:		reserved */
-#define PHY_XMAC_EXT_STAT	0x0f	/* 16 bit r/o	Ext Status Register */
-#define PHY_XMAC_RES_ABI	0x10	/* 16 bit r/o	PHY Resolved Ability */
-
-/*----------------------------------------------------------------------------*/
-/*
- * Broadcom-PHY Registers, indirect addressed over XMAC
- */
-#define PHY_BCOM_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
-#define PHY_BCOM_STAT		0x01	/* 16 bit r/o	PHY Status Register */
-#define PHY_BCOM_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
-#define PHY_BCOM_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
-#define PHY_BCOM_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
-#define PHY_BCOM_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
-#define PHY_BCOM_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
-#define PHY_BCOM_NEPG		0x07	/* 16 bit r/w	Next Page Register */
-#define PHY_BCOM_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
-	/* Broadcom-specific registers */
-#define PHY_BCOM_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
-#define PHY_BCOM_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
-	/* 0x0b - 0x0e:		reserved */
-#define PHY_BCOM_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
-#define PHY_BCOM_P_EXT_CTRL	0x10	/* 16 bit r/w	PHY Extended Ctrl Reg */
-#define PHY_BCOM_P_EXT_STAT	0x11	/* 16 bit r/o	PHY Extended Stat Reg */
-#define PHY_BCOM_RE_CTR		0x12	/* 16 bit r/w	Receive Error Counter */
-#define PHY_BCOM_FC_CTR		0x13	/* 16 bit r/w	False Carrier Sense Cnt */
-#define PHY_BCOM_RNO_CTR	0x14	/* 16 bit r/w	Receiver NOT_OK Cnt */
-	/* 0x15 - 0x17:		reserved */
-#define PHY_BCOM_AUX_CTRL	0x18	/* 16 bit r/w	Auxiliary Control Reg */
-#define PHY_BCOM_AUX_STAT	0x19	/* 16 bit r/o	Auxiliary Stat Summary */
-#define PHY_BCOM_INT_STAT	0x1a	/* 16 bit r/o	Interrupt Status Reg */
-#define PHY_BCOM_INT_MASK	0x1b	/* 16 bit r/w	Interrupt Mask Reg */
-	/* 0x1c:		reserved */
-	/* 0x1d - 0x1f:		test registers */
-
-/*----------------------------------------------------------------------------*/
-/*
- * Marvel-PHY Registers, indirect addressed over GMAC
- */
-#define PHY_MARV_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
-#define PHY_MARV_STAT		0x01	/* 16 bit r/o	PHY Status Register */
-#define PHY_MARV_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
-#define PHY_MARV_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
-#define PHY_MARV_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
-#define PHY_MARV_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
-#define PHY_MARV_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
-#define PHY_MARV_NEPG		0x07	/* 16 bit r/w	Next Page Register */
-#define PHY_MARV_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
-	/* Marvel-specific registers */
-#define PHY_MARV_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
-#define PHY_MARV_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
-	/* 0x0b - 0x0e:		reserved */
-#define PHY_MARV_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
-#define PHY_MARV_PHY_CTRL	0x10	/* 16 bit r/w	PHY Specific Ctrl Reg */
-#define PHY_MARV_PHY_STAT	0x11	/* 16 bit r/o	PHY Specific Stat Reg */
-#define PHY_MARV_INT_MASK	0x12	/* 16 bit r/w	Interrupt Mask Reg */
-#define PHY_MARV_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
-#define PHY_MARV_EXT_CTRL	0x14	/* 16 bit r/w	Ext. PHY Specific Ctrl */
-#define PHY_MARV_RXE_CNT	0x15	/* 16 bit r/w	Receive Error Counter */
-#define PHY_MARV_EXT_ADR	0x16	/* 16 bit r/w	Ext. Ad. for Cable Diag. */
-	/* 0x17:		reserved */
-#define PHY_MARV_LED_CTRL	0x18	/* 16 bit r/w	LED Control Reg */
-#define PHY_MARV_LED_OVER	0x19	/* 16 bit r/w	Manual LED Override Reg */
-#define PHY_MARV_EXT_CTRL_2	0x1a	/* 16 bit r/w	Ext. PHY Specific Ctrl 2 */
-#define PHY_MARV_EXT_P_STAT	0x1b	/* 16 bit r/w	Ext. PHY Spec. Stat Reg */
-#define PHY_MARV_CABLE_DIAG	0x1c	/* 16 bit r/o	Cable Diagnostic Reg */
-	/* 0x1d - 0x1f:		reserved */
-
-/*----------------------------------------------------------------------------*/
-/*
- * Level One-PHY Registers, indirect addressed over XMAC
- */
-#define PHY_LONE_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
-#define PHY_LONE_STAT		0x01	/* 16 bit r/o	PHY Status Register */
-#define PHY_LONE_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
-#define PHY_LONE_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
-#define PHY_LONE_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
-#define PHY_LONE_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
-#define PHY_LONE_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
-#define PHY_LONE_NEPG		0x07	/* 16 bit r/w	Next Page Register */
-#define PHY_LONE_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
-	/* Level One-specific registers */
-#define PHY_LONE_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg*/
-#define PHY_LONE_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
-	/* 0x0b -0x0e:		reserved */
-#define PHY_LONE_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
-#define PHY_LONE_PORT_CFG	0x10	/* 16 bit r/w	Port Configuration Reg*/
-#define PHY_LONE_Q_STAT		0x11	/* 16 bit r/o	Quick Status Reg */
-#define PHY_LONE_INT_ENAB	0x12	/* 16 bit r/w	Interrupt Enable Reg */
-#define PHY_LONE_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
-#define PHY_LONE_LED_CFG	0x14	/* 16 bit r/w	LED Configuration Reg */
-#define PHY_LONE_PORT_CTRL	0x15	/* 16 bit r/w	Port Control Reg */
-#define PHY_LONE_CIM		0x16	/* 16 bit r/o	CIM Reg */
-	/* 0x17 -0x1c:		reserved */
-
-/*----------------------------------------------------------------------------*/
-/*
- * National-PHY Registers, indirect addressed over XMAC
- */
-#define PHY_NAT_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
-#define PHY_NAT_STAT		0x01	/* 16 bit r/w	PHY Status Register */
-#define PHY_NAT_ID0			0x02	/* 16 bit r/o	PHY ID0 Register */
-#define PHY_NAT_ID1			0x03	/* 16 bit r/o	PHY ID1 Register */
-#define PHY_NAT_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
-#define PHY_NAT_AUNE_LP		0x05	/* 16 bit r/o	Link Partner Ability Reg */
-#define PHY_NAT_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
-#define PHY_NAT_NEPG		0x07	/* 16 bit r/w	Next Page Register */
-#define PHY_NAT_NEPG_LP		0x08	/* 16 bit r/o	Next Page Link Partner Reg */
-	/* National-specific registers */
-#define PHY_NAT_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg */
-#define PHY_NAT_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
-	/* 0x0b -0x0e:		reserved */
-#define PHY_NAT_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Register */
-#define PHY_NAT_EXT_CTRL1	0x10	/* 16 bit r/o	Extended Control Reg1 */
-#define PHY_NAT_Q_STAT1		0x11	/* 16 bit r/o	Quick Status Reg1 */
-#define PHY_NAT_10B_OP		0x12	/* 16 bit r/o	10Base-T Operations Reg */
-#define PHY_NAT_EXT_CTRL2	0x13	/* 16 bit r/o	Extended Control Reg1 */
-#define PHY_NAT_Q_STAT2		0x14	/* 16 bit r/o	Quick Status Reg2 */
-	/* 0x15 -0x18:		reserved */
-#define PHY_NAT_PHY_ADDR	0x19	/* 16 bit r/o	PHY Address Register */
-
-
-/*----------------------------------------------------------------------------*/
-
-/*
- * PHY bit definitions
- * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are
- * XMAC/Broadcom/LevelOne/National/Marvell-specific.
- * All other are general.
- */
-
-/*****  PHY_XMAC_CTRL	16 bit r/w	PHY Control Register *****/
-/*****  PHY_BCOM_CTRL	16 bit r/w	PHY Control Register *****/
-/*****  PHY_MARV_CTRL	16 bit r/w	PHY Status Register *****/
-/*****  PHY_LONE_CTRL	16 bit r/w	PHY Control Register *****/
-#define PHY_CT_RESET	(1<<15)	/* Bit 15: (sc)	clear all PHY related regs */
-#define PHY_CT_LOOP		(1<<14)	/* Bit 14:	enable Loopback over PHY */
-#define PHY_CT_SPS_LSB	(1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */
-#define PHY_CT_ANE		(1<<12)	/* Bit 12:	Auto-Negotiation Enabled */
-#define PHY_CT_PDOWN	(1<<11)	/* Bit 11: (BC,L1) Power Down Mode */
-#define PHY_CT_ISOL		(1<<10)	/* Bit 10: (BC,L1) Isolate Mode */
-#define PHY_CT_RE_CFG	(1<<9)	/* Bit  9: (sc) Restart Auto-Negotiation */
-#define PHY_CT_DUP_MD	(1<<8)	/* Bit  8:	Duplex Mode */
-#define PHY_CT_COL_TST	(1<<7)	/* Bit  7: (BC,L1) Collision Test enabled */
-#define PHY_CT_SPS_MSB	(1<<6)	/* Bit  6: (BC,L1) Speed select, upper bit */
-								/* Bit  5..0:	reserved */
-
-#define PHY_CT_SP1000	PHY_CT_SPS_MSB	/* enable speed of 1000 Mbps */
-#define PHY_CT_SP100	PHY_CT_SPS_LSB	/* enable speed of  100 Mbps */
-#define PHY_CT_SP10		(0)				/* enable speed of   10 Mbps */
-
-
-/*****  PHY_XMAC_STAT	16 bit r/w	PHY Status Register *****/
-/*****  PHY_BCOM_STAT	16 bit r/w	PHY Status Register *****/
-/*****  PHY_MARV_STAT	16 bit r/w	PHY Status Register *****/
-/*****  PHY_LONE_STAT	16 bit r/w	PHY Status Register *****/
-								/* Bit 15..9:	reserved */
-				/*	(BC/L1) 100/10 Mbps cap bits ignored*/
-#define PHY_ST_EXT_ST	(1<<8)	/* Bit  8:	Extended Status Present */
-								/* Bit  7:	reserved */
-#define PHY_ST_PRE_SUP	(1<<6)	/* Bit  6: (BC/L1) preamble suppression */
-#define PHY_ST_AN_OVER	(1<<5)	/* Bit  5:	Auto-Negotiation Over */
-#define PHY_ST_REM_FLT	(1<<4)	/* Bit  4:	Remote Fault Condition Occured */
-#define PHY_ST_AN_CAP	(1<<3)	/* Bit  3:	Auto-Negotiation Capability */
-#define PHY_ST_LSYNC	(1<<2)	/* Bit  2:	Link Synchronized */
-#define PHY_ST_JAB_DET	(1<<1)	/* Bit  1: (BC/L1) Jabber Detected */
-#define PHY_ST_EXT_REG	(1<<0)	/* Bit  0:	Extended Register available */
-
-
-/*****	PHY_XMAC_ID1		16 bit r/o	PHY ID1 Register */
-/*****	PHY_BCOM_ID1		16 bit r/o	PHY ID1 Register */
-/*****	PHY_MARV_ID1		16 bit r/o	PHY ID1 Register */
-/*****	PHY_LONE_ID1		16 bit r/o	PHY ID1 Register */
-#define PHY_I1_OUI_MSK	(0x3f<<10)	/* Bit 15..10:	Organization Unique ID */
-#define PHY_I1_MOD_NUM	(0x3f<<4)	/* Bit  9.. 4:	Model Number */
-#define PHY_I1_REV_MSK	0x0f		/* Bit  3.. 0:	Revision Number */
-
-/* different Broadcom PHY Ids */
-#define PHY_BCOM_ID1_A1		0x6041
-#define PHY_BCOM_ID1_B2		0x6043
-#define PHY_BCOM_ID1_C0		0x6044
-#define PHY_BCOM_ID1_C5		0x6047
-
-
-/*****  PHY_XMAC_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
-/*****  PHY_XMAC_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
-#define PHY_AN_NXT_PG	(1<<15)	/* Bit 15:	Request Next Page */
-#define PHY_X_AN_ACK	(1<<14)	/* Bit 14: (ro)	Acknowledge Received */
-#define PHY_X_AN_RFB	(3<<12)	/* Bit 13..12:	Remote Fault Bits */
-								/* Bit 11.. 9:	reserved */
-#define PHY_X_AN_PAUSE	(3<<7)	/* Bit  8.. 7:	Pause Bits */
-#define PHY_X_AN_HD		(1<<6)	/* Bit  6:	Half Duplex */
-#define PHY_X_AN_FD		(1<<5)	/* Bit  5:	Full Duplex */
-								/* Bit  4.. 0:	reserved */
-
-/*****  PHY_BCOM_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
-/*****  PHY_BCOM_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
-/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
-								/* Bit 14:	reserved */
-#define PHY_B_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
-								/* Bit 12:	reserved */
-#define PHY_B_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
-#define PHY_B_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
-								/* Bit  9..5:	100/10 BT cap bits ingnored */
-#define PHY_B_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
-
-/*****  PHY_LONE_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
-/*****  PHY_LONE_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
-/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
-								/* Bit 14:	reserved */
-#define PHY_L_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
-								/* Bit 12:	reserved */
-#define PHY_L_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
-#define PHY_L_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
-								/* Bit  9..5:	100/10 BT cap bits ingnored */
-#define PHY_L_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
-
-/*****  PHY_NAT_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
-/*****  PHY_NAT_AUNE_LP		16 bit r/o	Link Partner Ability Reg *****/
-/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
-								/* Bit 14:	reserved */
-#define PHY_N_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
-								/* Bit 12:	reserved */
-#define PHY_N_AN_100F	(1<<11)	/* Bit 11:	100Base-T2 FD Support */
-#define PHY_N_AN_100H	(1<<10)	/* Bit 10:	100Base-T2 HD Support */
-								/* Bit  9..5:	100/10 BT cap bits ingnored */
-#define PHY_N_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
-
-/* field type definition for PHY_x_AN_SEL */
-#define PHY_SEL_TYPE	0x01	/* 00001 = Ethernet */
-
-/*****  PHY_XMAC_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
-								/* Bit 15..4:	reserved */
-#define PHY_ANE_LP_NP	(1<<3)	/* Bit  3:	Link Partner can Next Page */
-#define PHY_ANE_LOC_NP	(1<<2)	/* Bit  2:	Local PHY can Next Page */
-#define PHY_ANE_RX_PG	(1<<1)	/* Bit  1:	Page Received */
-								/* Bit  0:	reserved */
-
-/*****  PHY_BCOM_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
-/*****  PHY_LONE_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
-/*****  PHY_MARV_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
-								/* Bit 15..5:	reserved */
-#define PHY_ANE_PAR_DF	(1<<4)	/* Bit  4:	Parallel Detection Fault */
-/*	PHY_ANE_LP_NP		(see XMAC) Bit  3:	Link Partner can Next Page */
-/*	PHY_ANE_LOC_NP		(see XMAC) Bit  2:	Local PHY can Next Page */
-/*	PHY_ANE_RX_PG		(see XMAC) Bit  1:	Page Received */
-#define PHY_ANE_LP_CAP	(1<<0)	/* Bit  0:	Link Partner Auto-Neg. Cap. */ 	
-
-/*****  PHY_XMAC_NEPG		16 bit r/w	Next Page Register *****/
-/*****  PHY_BCOM_NEPG		16 bit r/w	Next Page Register *****/
-/*****  PHY_LONE_NEPG		16 bit r/w	Next Page Register *****/
-/*****  PHY_XMAC_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
-/*****  PHY_BCOM_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
-/*****  PHY_LONE_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
-#define PHY_NP_MORE		(1<<15)	/* Bit 15:	More, Next Pages to follow */
-#define PHY_NP_ACK1		(1<<14)	/* Bit 14: (ro)	Ack1, for receiving a message */
-#define PHY_NP_MSG_VAL	(1<<13)	/* Bit 13:	Message Page valid */
-#define PHY_NP_ACK2		(1<<12)	/* Bit 12:	Ack2, comply with msg content */
-#define PHY_NP_TOG		(1<<11)	/* Bit 11:	Toggle Bit, ensure sync */
-#define PHY_NP_MSG		0x07ff	/* Bit 10..0:	Message from/to Link Partner */
-
-/*
- * XMAC-Specific
- */
-/*****  PHY_XMAC_EXT_STAT	16 bit r/w	Extended Status Register *****/
-#define PHY_X_EX_FD		(1<<15)	/* Bit 15:	Device Supports Full Duplex */
-#define PHY_X_EX_HD		(1<<14)	/* Bit 14:	Device Supports Half Duplex */
-								/* Bit 13..0:	reserved */
-
-/*****  PHY_XMAC_RES_ABI	16 bit r/o	PHY Resolved Ability *****/
-								/* Bit 15..9:	reserved */
-#define PHY_X_RS_PAUSE	(3<<7)	/* Bit  8..7:	selected Pause Mode */
-#define PHY_X_RS_HD		(1<<6)	/* Bit  6:	Half Duplex Mode selected */
-#define PHY_X_RS_FD		(1<<5)	/* Bit  5:	Full Duplex Mode selected */
-#define PHY_X_RS_ABLMIS (1<<4)	/* Bit  4:	duplex or pause cap mismatch */
-#define PHY_X_RS_PAUMIS (1<<3)	/* Bit  3:	pause capability mismatch */
-								/* Bit  2..0:	reserved */
-/*
- * Remote Fault Bits (PHY_X_AN_RFB) encoding
- */
-#define X_RFB_OK		(0<<12)	/* Bit 13..12	No errors, Link OK */
-#define X_RFB_LF		(1<<12)	/* Bit 13..12	Link Failure */
-#define X_RFB_OFF		(2<<12)	/* Bit 13..12	Offline */
-#define X_RFB_AN_ERR	(3<<12)	/* Bit 13..12	Auto-Negotiation Error */
-
-/*
- * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding
- */
-#define PHY_X_P_NO_PAUSE	(0<<7)	/* Bit  8..7:	no Pause Mode */
-#define PHY_X_P_SYM_MD		(1<<7)	/* Bit  8..7:	symmetric Pause Mode */
-#define PHY_X_P_ASYM_MD		(2<<7)	/* Bit  8..7:	asymmetric Pause Mode */
-#define PHY_X_P_BOTH_MD		(3<<7)	/* Bit  8..7:	both Pause Mode */
-
-
-/*
- * Broadcom-Specific
- */
-/*****  PHY_BCOM_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
-#define PHY_B_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
-#define PHY_B_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
-#define PHY_B_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
-#define PHY_B_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
-#define PHY_B_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
-#define PHY_B_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
-									/* Bit  7..0:	reserved */
-
-/*****  PHY_BCOM_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
-/*****  PHY_MARV_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
-#define PHY_B_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
-#define PHY_B_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
-#define PHY_B_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
-#define PHY_B_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status */
-#define PHY_B_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
-#define PHY_B_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
-									/* Bit  9..8:	reserved */
-#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
-
-/*****  PHY_BCOM_EXT_STAT	16 bit r/o	Extended Status Register *****/
-#define PHY_B_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
-#define PHY_B_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
-#define PHY_B_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
-#define PHY_B_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
-									/* Bit 11..0:	reserved */
-
-/*****  PHY_BCOM_P_EXT_CTRL	16 bit r/w	PHY Extended Control Reg *****/
-#define PHY_B_PEC_MAC_PHY	(1<<15)	/* Bit 15:	10BIT/GMI-Interface */
-#define PHY_B_PEC_DIS_CROSS	(1<<14)	/* Bit 14:	Disable MDI Crossover */
-#define PHY_B_PEC_TX_DIS	(1<<13)	/* Bit 13:	Tx output Disabled */
-#define PHY_B_PEC_INT_DIS	(1<<12)	/* Bit 12:	Interrupts Disabled */
-#define PHY_B_PEC_F_INT		(1<<11)	/* Bit 11:	Force Interrupt */
-#define PHY_B_PEC_BY_45		(1<<10)	/* Bit 10:	Bypass 4B5B-Decoder */
-#define PHY_B_PEC_BY_SCR	(1<<9)	/* Bit  9:	Bypass Scrambler */
-#define PHY_B_PEC_BY_MLT3	(1<<8)	/* Bit  8:	Bypass MLT3 Encoder */
-#define PHY_B_PEC_BY_RXA	(1<<7)	/* Bit  7:	Bypass Rx Alignm. */
-#define PHY_B_PEC_RES_SCR	(1<<6)	/* Bit  6:	Reset Scrambler */
-#define PHY_B_PEC_EN_LTR	(1<<5)	/* Bit  5:	Ena LED Traffic Mode */
-#define PHY_B_PEC_LED_ON	(1<<4)	/* Bit  4:	Force LED's on */
-#define PHY_B_PEC_LED_OFF	(1<<3)	/* Bit  3:	Force LED's off */
-#define PHY_B_PEC_EX_IPG	(1<<2)	/* Bit  2:	Extend Tx IPG Mode */
-#define PHY_B_PEC_3_LED		(1<<1)	/* Bit  1:	Three Link LED mode */
-#define PHY_B_PEC_HIGH_LA	(1<<0)	/* Bit  0:	GMII FIFO Elasticy */
-
-/*****  PHY_BCOM_P_EXT_STAT	16 bit r/o	PHY Extended Status Reg *****/
-									/* Bit 15..14:	reserved */
-#define PHY_B_PES_CROSS_STAT	(1<<13)	/* Bit 13:	MDI Crossover Status */
-#define PHY_B_PES_INT_STAT	(1<<12)	/* Bit 12:	Interrupt Status */
-#define PHY_B_PES_RRS		(1<<11)	/* Bit 11:	Remote Receiver Stat. */
-#define PHY_B_PES_LRS		(1<<10)	/* Bit 10:	Local Receiver Stat. */
-#define PHY_B_PES_LOCKED	(1<<9)	/* Bit  9:	Locked */
-#define PHY_B_PES_LS		(1<<8)	/* Bit  8:	Link Status */
-#define PHY_B_PES_RF		(1<<7)	/* Bit  7:	Remote Fault */
-#define PHY_B_PES_CE_ER		(1<<6)	/* Bit  6:	Carrier Ext Error */
-#define PHY_B_PES_BAD_SSD	(1<<5)	/* Bit  5:	Bad SSD */
-#define PHY_B_PES_BAD_ESD	(1<<4)	/* Bit  4:	Bad ESD */
-#define PHY_B_PES_RX_ER		(1<<3)	/* Bit  3:	Receive Error */
-#define PHY_B_PES_TX_ER		(1<<2)	/* Bit  2:	Transmit Error */
-#define PHY_B_PES_LOCK_ER	(1<<1)	/* Bit  1:	Lock Error */
-#define PHY_B_PES_MLT3_ER	(1<<0)	/* Bit  0:	MLT3 code Error */
-
-/*****  PHY_BCOM_FC_CTR		16 bit r/w	False Carrier Counter *****/
-									/* Bit 15..8:	reserved */
-#define PHY_B_FC_CTR		0xff	/* Bit  7..0:	False Carrier Counter */
-
-/*****  PHY_BCOM_RNO_CTR	16 bit r/w	Receive NOT_OK Counter *****/
-#define PHY_B_RC_LOC_MSK	0xff00	/* Bit 15..8:	Local Rx NOT_OK cnt */
-#define PHY_B_RC_REM_MSK	0x00ff	/* Bit  7..0:	Remote Rx NOT_OK cnt */
-
-/*****  PHY_BCOM_AUX_CTRL	16 bit r/w	Auxiliary Control Reg *****/
-#define PHY_B_AC_L_SQE		(1<<15)	/* Bit 15:	Low Squelch */
-#define PHY_B_AC_LONG_PACK	(1<<14)	/* Bit 14:	Rx Long Packets */
-#define PHY_B_AC_ER_CTRL	(3<<12)	/* Bit 13..12:	Edgerate Control */
-									/* Bit 11:	reserved */
-#define PHY_B_AC_TX_TST		(1<<10) /* Bit 10:	Tx test bit, always 1 */
-									/* Bit  9.. 8:	reserved */
-#define PHY_B_AC_DIS_PRF	(1<<7)	/* Bit  7:	dis part resp filter */
-									/* Bit  6:	reserved */
-#define PHY_B_AC_DIS_PM		(1<<5)	/* Bit  5:	dis power management */
-									/* Bit  4:	reserved */
-#define PHY_B_AC_DIAG		(1<<3)	/* Bit  3:	Diagnostic Mode */
-									/* Bit  2.. 0:	reserved */
-
-/*****  PHY_BCOM_AUX_STAT	16 bit r/o	Auxiliary Status Reg *****/
-#define PHY_B_AS_AN_C		(1<<15)	/* Bit 15:	AutoNeg complete */
-#define PHY_B_AS_AN_CA		(1<<14)	/* Bit 14:	AN Complete Ack */
-#define PHY_B_AS_ANACK_D	(1<<13)	/* Bit 13:	AN Ack Detect */
-#define PHY_B_AS_ANAB_D		(1<<12)	/* Bit 12:	AN Ability Detect */
-#define PHY_B_AS_NPW		(1<<11)	/* Bit 11:	AN Next Page Wait */
-#define PHY_B_AS_AN_RES_MSK	(7<<8)	/* Bit 10..8:	AN HDC */
-#define PHY_B_AS_PDF		(1<<7)	/* Bit  7:	Parallel Detect. Fault */
-#define PHY_B_AS_RF			(1<<6)	/* Bit  6:	Remote Fault */
-#define PHY_B_AS_ANP_R		(1<<5)	/* Bit  5:	AN Page Received */
-#define PHY_B_AS_LP_ANAB	(1<<4)	/* Bit  4:	LP AN Ability */
-#define PHY_B_AS_LP_NPAB	(1<<3)	/* Bit  3:	LP Next Page Ability */
-#define PHY_B_AS_LS			(1<<2)	/* Bit  2:	Link Status */
-#define PHY_B_AS_PRR		(1<<1)	/* Bit  1:	Pause Resolution-Rx */
-#define PHY_B_AS_PRT		(1<<0)	/* Bit  0:	Pause Resolution-Tx */
-
-#define PHY_B_AS_PAUSE_MSK	(PHY_B_AS_PRR | PHY_B_AS_PRT)
-
-/*****  PHY_BCOM_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
-/*****  PHY_BCOM_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
-									/* Bit 15:	reserved */
-#define PHY_B_IS_PSE		(1<<14)	/* Bit 14:	Pair Swap Error */
-#define PHY_B_IS_MDXI_SC	(1<<13)	/* Bit 13:	MDIX Status Change */
-#define PHY_B_IS_HCT		(1<<12)	/* Bit 12:	counter above 32k */
-#define PHY_B_IS_LCT		(1<<11)	/* Bit 11:	counter above 128 */
-#define PHY_B_IS_AN_PR		(1<<10)	/* Bit 10:	Page Received */
-#define PHY_B_IS_NO_HDCL	(1<<9)	/* Bit  9:	No HCD Link */
-#define PHY_B_IS_NO_HDC		(1<<8)	/* Bit  8:	No HCD */
-#define PHY_B_IS_NEG_USHDC	(1<<7)	/* Bit  7:	Negotiated Unsup. HCD */
-#define PHY_B_IS_SCR_S_ER	(1<<6)	/* Bit  6:	Scrambler Sync Error */
-#define PHY_B_IS_RRS_CHANGE	(1<<5)	/* Bit  5:	Remote Rx Stat Change */
-#define PHY_B_IS_LRS_CHANGE	(1<<4)	/* Bit  4:	Local Rx Stat Change */
-#define PHY_B_IS_DUP_CHANGE	(1<<3)	/* Bit  3:	Duplex Mode Change */
-#define PHY_B_IS_LSP_CHANGE	(1<<2)	/* Bit  2:	Link Speed Change */
-#define PHY_B_IS_LST_CHANGE	(1<<1)	/* Bit  1:	Link Status Changed */
-#define PHY_B_IS_CRC_ER		(1<<0)	/* Bit  0:	CRC Error */
-
-#define PHY_B_DEF_MSK	(~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
-
-/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
-#define PHY_B_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
-#define PHY_B_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
-#define PHY_B_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
-#define PHY_B_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */
-
-/*
- * Resolved Duplex mode and Capabilities (Aux Status Summary Reg)
- */
-#define PHY_B_RES_1000FD	(7<<8)	/* Bit 10..8:	1000Base-T Full Dup. */
-#define PHY_B_RES_1000HD	(6<<8)	/* Bit 10..8:	1000Base-T Half Dup. */
-/* others: 100/10: invalid for us */
-
-/*
- * Level One-Specific
- */
-/*****  PHY_LONE_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
-#define PHY_L_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
-#define PHY_L_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
-#define PHY_L_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
-#define PHY_L_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
-#define PHY_L_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
-#define PHY_L_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
-									/* Bit  7..0:	reserved */
-
-/*****  PHY_LONE_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
-#define PHY_L_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
-#define PHY_L_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
-#define PHY_L_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
-#define PHY_L_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status */
-#define PHY_L_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
-#define PHY_L_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
-									/* Bit  9..8:	reserved */
-#define PHY_B_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
-
-/*****  PHY_LONE_EXT_STAT	16 bit r/o	Extended Status Register *****/
-#define PHY_L_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
-#define PHY_L_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
-#define PHY_L_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
-#define PHY_L_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
-									/* Bit 11..0:	reserved */
-
-/*****  PHY_LONE_PORT_CFG	16 bit r/w	Port Configuration Reg *****/
-#define PHY_L_PC_REP_MODE	(1<<15)	/* Bit 15:	Repeater Mode */
-									/* Bit 14:	reserved */
-#define PHY_L_PC_TX_DIS		(1<<13)	/* Bit 13:	Tx output Disabled */
-#define PHY_L_PC_BY_SCR		(1<<12)	/* Bit 12:	Bypass Scrambler */
-#define PHY_L_PC_BY_45		(1<<11)	/* Bit 11:	Bypass 4B5B-Decoder */
-#define PHY_L_PC_JAB_DIS	(1<<10)	/* Bit 10:	Jabber Disabled */
-#define PHY_L_PC_SQE		(1<<9)	/* Bit  9:	Enable Heartbeat */
-#define PHY_L_PC_TP_LOOP	(1<<8)	/* Bit  8:	TP Loopback */
-#define PHY_L_PC_SSS		(1<<7)	/* Bit  7:	Smart Speed Selection */
-#define PHY_L_PC_FIFO_SIZE	(1<<6)	/* Bit  6:	FIFO Size */
-#define PHY_L_PC_PRE_EN		(1<<5)	/* Bit  5:	Preamble Enable */
-#define PHY_L_PC_CIM		(1<<4)	/* Bit  4:	Carrier Integrity Mon */
-#define PHY_L_PC_10_SER		(1<<3)	/* Bit  3:	Use Serial Output */
-#define PHY_L_PC_ANISOL		(1<<2)	/* Bit  2:	Unisolate Port */
-#define PHY_L_PC_TEN_BIT	(1<<1)	/* Bit  1:	10bit iface mode on */
-#define PHY_L_PC_ALTCLOCK	(1<<0)	/* Bit  0: (ro)	ALTCLOCK Mode on */
-
-/*****  PHY_LONE_Q_STAT		16 bit r/o	Quick Status Reg *****/
-#define PHY_L_QS_D_RATE		(3<<14)	/* Bit 15..14:	Data Rate */
-#define PHY_L_QS_TX_STAT	(1<<13)	/* Bit 13:	Transmitting */
-#define PHY_L_QS_RX_STAT	(1<<12)	/* Bit 12:	Receiving */
-#define PHY_L_QS_COL_STAT	(1<<11)	/* Bit 11:	Collision */
-#define PHY_L_QS_L_STAT		(1<<10)	/* Bit 10:	Link is up */
-#define PHY_L_QS_DUP_MOD	(1<<9)	/* Bit  9:	Full/Half Duplex */
-#define PHY_L_QS_AN			(1<<8)	/* Bit  8:	AutoNeg is On */
-#define PHY_L_QS_AN_C		(1<<7)	/* Bit  7:	AN is Complete */
-#define PHY_L_QS_LLE		(7<<4)	/* Bit  6:	Line Length Estim. */
-#define PHY_L_QS_PAUSE		(1<<3)	/* Bit  3:	LP advertised Pause */
-#define PHY_L_QS_AS_PAUSE	(1<<2)	/* Bit  2:	LP adv. asym. Pause */
-#define PHY_L_QS_ISOLATE	(1<<1)	/* Bit  1:	CIM Isolated */
-#define PHY_L_QS_EVENT		(1<<0)	/* Bit  0:	Event has occurred */
-
-/*****  PHY_LONE_INT_ENAB	16 bit r/w	Interrupt Enable Reg *****/
-/*****  PHY_LONE_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
-									/* Bit 15..14:	reserved */
-#define PHY_L_IS_AN_F		(1<<13)	/* Bit 13:	Auto-Negotiation fault */
-									/* Bit 12:	not described */
-#define PHY_L_IS_CROSS		(1<<11)	/* Bit 11:	Crossover used */
-#define PHY_L_IS_POL		(1<<10)	/* Bit 10:	Polarity correct. used */
-#define PHY_L_IS_SS			(1<<9)	/* Bit  9:	Smart Speed Downgrade */
-#define PHY_L_IS_CFULL		(1<<8)	/* Bit  8:	Counter Full */
-#define PHY_L_IS_AN_C		(1<<7)	/* Bit  7:	AutoNeg Complete */
-#define PHY_L_IS_SPEED		(1<<6)	/* Bit  6:	Speed Changed */
-#define PHY_L_IS_DUP		(1<<5)	/* Bit  5:	Duplex Changed */
-#define PHY_L_IS_LS			(1<<4)	/* Bit  4:	Link Status Changed */
-#define PHY_L_IS_ISOL		(1<<3)	/* Bit  3:	Isolate Occured */
-#define PHY_L_IS_MDINT		(1<<2)	/* Bit  2: (ro)	STAT: MII Int Pending */
-#define PHY_L_IS_INTEN		(1<<1)	/* Bit  1:	ENAB: Enable IRQs */
-#define PHY_L_IS_FORCE		(1<<0)	/* Bit  0:	ENAB: Force Interrupt */
-
-/* int. mask */
-#define PHY_L_DEF_MSK		(PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN)
-
-/*****  PHY_LONE_LED_CFG	16 bit r/w	LED Configuration Reg *****/
-#define PHY_L_LC_LEDC		(3<<14)	/* Bit 15..14:	Col/Blink/On/Off */
-#define PHY_L_LC_LEDR		(3<<12)	/* Bit 13..12:	Rx/Blink/On/Off */
-#define PHY_L_LC_LEDT		(3<<10)	/* Bit 11..10:	Tx/Blink/On/Off */
-#define PHY_L_LC_LEDG		(3<<8)	/* Bit  9..8:	Giga/Blink/On/Off */
-#define PHY_L_LC_LEDS		(3<<6)	/* Bit  7..6:	10-100/Blink/On/Off */
-#define PHY_L_LC_LEDL		(3<<4)	/* Bit  5..4:	Link/Blink/On/Off */
-#define PHY_L_LC_LEDF		(3<<2)	/* Bit  3..2:	Duplex/Blink/On/Off */
-#define PHY_L_LC_PSTRECH	(1<<1)	/* Bit  1:	Strech LED Pulses */
-#define PHY_L_LC_FREQ		(1<<0)	/* Bit  0:	30/100 ms */
-
-/*****  PHY_LONE_PORT_CTRL	16 bit r/w	Port Control Reg *****/
-#define PHY_L_PC_TX_TCLK	(1<<15)	/* Bit 15:	Enable TX_TCLK */
-									/* Bit 14:	reserved */
-#define PHY_L_PC_ALT_NP		(1<<13)	/* Bit 14:	Alternate Next Page */
-#define PHY_L_PC_GMII_ALT	(1<<12)	/* Bit 13:	Alternate GMII driver */
-									/* Bit 11:	reserved */
-#define PHY_L_PC_TEN_CRS	(1<<10)	/* Bit 10:	Extend CRS*/
-									/* Bit  9..0:	not described */
-
-/*****  PHY_LONE_CIM		16 bit r/o	CIM Reg *****/
-#define PHY_L_CIM_ISOL		(255<<8)/* Bit 15..8:	Isolate Count */
-#define PHY_L_CIM_FALSE_CAR	(255<<0)/* Bit  7..0:	False Carrier Count */
-
-
-/*
- * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding
- */
-#define PHY_L_P_NO_PAUSE	(0<<10)	/* Bit 11..10:	no Pause Mode */
-#define PHY_L_P_SYM_MD		(1<<10)	/* Bit 11..10:	symmetric Pause Mode */
-#define PHY_L_P_ASYM_MD		(2<<10)	/* Bit 11..10:	asymmetric Pause Mode */
-#define PHY_L_P_BOTH_MD		(3<<10)	/* Bit 11..10:	both Pause Mode */
-
-
-/*
- * National-Specific
- */
-/*****  PHY_NAT_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
-#define PHY_N_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
-#define PHY_N_1000C_MSE		(1<<12)	/* Bit 12:	Master/Slave Enable */
-#define PHY_N_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration */
-#define PHY_N_1000C_RD		(1<<10)	/* Bit 10:	Repeater/DTE */
-#define PHY_N_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
-#define PHY_N_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
-#define PHY_N_1000C_APC		(1<<7)	/* Bit  7:	Asymmetric Pause Cap. */
-									/* Bit  6..0:	reserved */
-
-/*****  PHY_NAT_1000T_STAT	16 bit r/o	1000Base-T Status Reg *****/
-#define PHY_N_1000S_MSF		(1<<15)	/* Bit 15:	Master/Slave Fault */
-#define PHY_N_1000S_MSR		(1<<14)	/* Bit 14:	Master/Slave Result */
-#define PHY_N_1000S_LRS		(1<<13)	/* Bit 13:	Local Receiver Status */
-#define PHY_N_1000S_RRS		(1<<12)	/* Bit 12:	Remote Receiver Status*/
-#define PHY_N_1000S_LP_FD	(1<<11)	/* Bit 11:	Link Partner can FD */
-#define PHY_N_1000S_LP_HD	(1<<10)	/* Bit 10:	Link Partner can HD */
-#define PHY_N_1000C_LP_APC	(1<<9)	/* Bit  9:	LP Asym. Pause Cap. */
-									/* Bit  8:	reserved */
-#define PHY_N_1000S_IEC		0xff	/* Bit  7..0:	Idle Error Count */
-
-/*****  PHY_NAT_EXT_STAT	16 bit r/o	Extended Status Register *****/
-#define PHY_N_ES_X_FD_CAP	(1<<15)	/* Bit 15:	1000Base-X FD capable */
-#define PHY_N_ES_X_HD_CAP	(1<<14)	/* Bit 14:	1000Base-X HD capable */
-#define PHY_N_ES_T_FD_CAP	(1<<13)	/* Bit 13:	1000Base-T FD capable */
-#define PHY_N_ES_T_HD_CAP	(1<<12)	/* Bit 12:	1000Base-T HD capable */
-									/* Bit 11..0:	reserved */
-
-/* todo: those are still missing */
-/*****  PHY_NAT_EXT_CTRL1	16 bit r/o	Extended Control Reg1 *****/
-/*****  PHY_NAT_Q_STAT1		16 bit r/o	Quick Status Reg1 *****/
-/*****  PHY_NAT_10B_OP		16 bit r/o	10Base-T Operations Reg *****/
-/*****  PHY_NAT_EXT_CTRL2	16 bit r/o	Extended Control Reg1 *****/
-/*****  PHY_NAT_Q_STAT2		16 bit r/o	Quick Status Reg2 *****/
-/*****  PHY_NAT_PHY_ADDR	16 bit r/o	PHY Address Register *****/
-
-/*
- * Marvell-Specific
- */
-/*****  PHY_MARV_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
-/*****  PHY_MARV_AUNE_LP	16 bit r/w	Link Part Ability Reg *****/
-#define PHY_M_AN_NXT_PG		BIT_15	/* Request Next Page */
-#define PHY_M_AN_ACK		BIT_14	/* (ro)	Acknowledge Received */
-#define PHY_M_AN_RF			BIT_13	/* Remote Fault */
-									/* Bit 12:	reserved */
-#define PHY_M_AN_ASP		BIT_11	/* Asymmetric Pause */
-#define PHY_M_AN_PC			BIT_10	/* MAC Pause implemented */
-#define PHY_M_AN_100_FD		BIT_8	/* Advertise 100Base-TX Full Duplex */
-#define PHY_M_AN_100_HD		BIT_7	/* Advertise 100Base-TX Half Duplex */
-#define PHY_M_AN_10_FD		BIT_6	/* Advertise 10Base-TX Full Duplex */
-#define PHY_M_AN_10_HD		BIT_5	/* Advertise 10Base-TX Half Duplex */
-
-/* special defines for FIBER (88E1011S only) */
-#define PHY_M_AN_ASP_X		BIT_8	/* Asymmetric Pause */
-#define PHY_M_AN_PC_X		BIT_7	/* MAC Pause implemented */
-#define PHY_M_AN_1000X_AHD	BIT_6	/* Advertise 10000Base-X Half Duplex */
-#define PHY_M_AN_1000X_AFD	BIT_5	/* Advertise 10000Base-X Full Duplex */
-
-/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */
-#define PHY_M_P_NO_PAUSE_X	(0<<7)	/* Bit  8.. 7:	no Pause Mode */
-#define PHY_M_P_SYM_MD_X	(1<<7)	/* Bit  8.. 7:	symmetric Pause Mode */
-#define PHY_M_P_ASYM_MD_X	(2<<7)	/* Bit  8.. 7:	asymmetric Pause Mode */
-#define PHY_M_P_BOTH_MD_X	(3<<7)	/* Bit  8.. 7:	both Pause Mode */
-
-/*****  PHY_MARV_1000T_CTRL	16 bit r/w	1000Base-T Control Reg *****/
-#define PHY_M_1000C_TEST	(7<<13)	/* Bit 15..13:	Test Modes */
-#define PHY_M_1000C_MSE		(1<<12)	/* Bit 12:	Manual Master/Slave Enable */
-#define PHY_M_1000C_MSC		(1<<11)	/* Bit 11:	M/S Configuration (1=Master) */
-#define PHY_M_1000C_MPD		(1<<10)	/* Bit 10:	Multi-Port Device */
-#define PHY_M_1000C_AFD		(1<<9)	/* Bit  9:	Advertise Full Duplex */
-#define PHY_M_1000C_AHD		(1<<8)	/* Bit  8:	Advertise Half Duplex */
-									/* Bit  7..0:	reserved */
-
-/*****  PHY_MARV_PHY_CTRL	16 bit r/w	PHY Specific Ctrl Reg *****/
-#define PHY_M_PC_TX_FFD_MSK	(3<<14)	/* Bit 15..14:	Tx FIFO Depth Mask */
-#define PHY_M_PC_RX_FFD_MSK	(3<<12)	/* Bit 13..12:	Rx FIFO Depth Mask */
-#define PHY_M_PC_ASS_CRS_TX	(1<<11)	/* Bit 11:	Assert CRS on Transmit */
-#define PHY_M_PC_FL_GOOD	(1<<10)	/* Bit 10:	Force Link Good */
-#define PHY_M_PC_EN_DET_MSK	(3<<8)	/* Bit  9.. 8:	Energy Detect Mask */
-#define PHY_M_PC_ENA_EXT_D	(1<<7)	/* Bit  7:	Enable Ext. Distance (10BT) */
-#define PHY_M_PC_MDIX_MSK	(3<<5)	/* Bit  6.. 5:	MDI/MDIX Config. Mask */
-#define PHY_M_PC_DIS_125CLK	(1<<4)	/* Bit  4:	Disable 125 CLK */
-#define PHY_M_PC_MAC_POW_UP	(1<<3)	/* Bit  3:	MAC Power up */
-#define PHY_M_PC_SQE_T_ENA	(1<<2)	/* Bit  2:	SQE Test Enabled */
-#define PHY_M_PC_POL_R_DIS	(1<<1)	/* Bit  1:	Polarity Reversal Disabled */
-#define PHY_M_PC_DIS_JABBER	(1<<0)	/* Bit  0:	Disable Jabber */
-
-#define PHY_M_PC_EN_DET			SHIFT8(2)	/* Energy Detect (Mode 1) */
-#define PHY_M_PC_EN_DET_PLUS	SHIFT8(3)	/* Energy Detect Plus (Mode 2) */
-
-#define PHY_M_PC_MDI_XMODE(x)	SHIFT5(x)	
-#define PHY_M_PC_MAN_MDI	0    	/* 00 = Manual MDI configuration */
-#define PHY_M_PC_MAN_MDIX	1		/* 01 = Manual MDIX configuration */
-#define PHY_M_PC_ENA_AUTO	3		/* 11 = Enable Automatic Crossover */
-
-/*****  PHY_MARV_PHY_STAT	16 bit r/o	PHY Specific Status Reg *****/
-#define PHY_M_PS_SPEED_MSK	(3<<14)	/* Bit 15..14:	Speed Mask */
-#define PHY_M_PS_SPEED_1000	(1<<15)	/*       10 = 1000 Mbps */
-#define PHY_M_PS_SPEED_100	(1<<14)	/*       01 =  100 Mbps */
-#define PHY_M_PS_SPEED_10	0		/*       00 =   10 Mbps */
-#define PHY_M_PS_FULL_DUP	(1<<13)	/* Bit 13:	Full Duplex */
-#define PHY_M_PS_PAGE_REC	(1<<12)	/* Bit 12:	Page Received */
-#define PHY_M_PS_SPDUP_RES	(1<<11)	/* Bit 11:	Speed & Duplex Resolved */
-#define PHY_M_PS_LINK_UP	(1<<10)	/* Bit 10:	Link Up */
-#define PHY_M_PS_CABLE_MSK	(3<<7)	/* Bit  9.. 7:	Cable Length Mask */
-#define PHY_M_PS_MDI_X_STAT	(1<<6)	/* Bit  6:	MDI Crossover Stat (1=MDIX) */
-#define PHY_M_PS_DOWNS_STAT	(1<<5)	/* Bit  5:	Downshift Status (1=downsh.) */
-#define PHY_M_PS_ENDET_STAT	(1<<4)	/* Bit  4:	Energy Detect Status (1=act) */
-#define PHY_M_PS_TX_P_EN	(1<<3)	/* Bit  3:	Tx Pause Enabled */
-#define PHY_M_PS_RX_P_EN	(1<<2)	/* Bit  2:	Rx Pause Enabled */
-#define PHY_M_PS_POL_REV	(1<<1)	/* Bit  1:	Polarity Reversed */
-#define PHY_M_PC_JABBER		(1<<0)	/* Bit  0:	Jabber */
-
-#define PHY_M_PS_PAUSE_MSK	(PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)
-
-/*****  PHY_MARV_INT_MASK	16 bit r/w	Interrupt Mask Reg *****/
-/*****  PHY_MARV_INT_STAT	16 bit r/o	Interrupt Status Reg *****/
-#define PHY_M_IS_AN_ERROR	(1<<15)	/* Bit 15:	Auto-Negotiation Error */
-#define PHY_M_IS_LSP_CHANGE	(1<<14)	/* Bit 14:	Link Speed Changed */
-#define PHY_M_IS_DUP_CHANGE	(1<<13)	/* Bit 13:	Duplex Mode Changed */
-#define PHY_M_IS_AN_PR		(1<<12)	/* Bit 12:	Page Received */
-#define PHY_M_IS_AN_COMPL	(1<<11)	/* Bit 11:	Auto-Negotiation Completed */
-#define PHY_M_IS_LST_CHANGE	(1<<10)	/* Bit 10:	Link Status Changed */
-#define PHY_M_IS_SYMB_ERROR	(1<<9)	/* Bit  9:	Symbol Error */
-#define PHY_M_IS_FALSE_CARR	(1<<8)	/* Bit  8:	False Carrier */
-#define PHY_M_IS_FIFO_ERROR	(1<<7)	/* Bit  7:	FIFO Overflow/Underrun Error */
-#define PHY_M_IS_MDI_CHANGE	(1<<6)	/* Bit  6:	MDI Crossover Changed */
-#define PHY_M_IS_DOWNSH_DET	(1<<5)	/* Bit  5:	Downshift Detected */
-#define PHY_M_IS_END_CHANGE	(1<<4)	/* Bit  4:	Energy Detect Changed */
-									/* Bit  3..2:	reserved */
-#define PHY_M_IS_POL_CHANGE	(1<<1)	/* Bit  1:	Polarity Changed */
-#define PHY_M_IS_JABBER		(1<<0)	/* Bit  0:	Jabber */
-
-#define PHY_M_DEF_MSK		(PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \
-							PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
-
-/*****  PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl *****/
-#define PHY_M_EC_M_DSC_MSK	(3<<10)	/* Bit 11..10:	Master downshift counter */
-#define PHY_M_EC_S_DSC_MSK	(3<<8)	/* Bit  9.. 8:	Slave  downshift counter */
-#define PHY_M_EC_MAC_S_MSK	(7<<4)	/* Bit  6.. 4:	Def. MAC interface speed */
-#define PHY_M_EC_FIB_AN_ENA	(1<<3)	/* Bit  3:	Fiber Auto-Neg. Enable */
-
-#define PHY_M_EC_M_DSC(x)		SHIFT10(x)	/* 00=1x; 01=2x; 10=3x; 11=4x */
-#define PHY_M_EC_S_DSC(x)		SHIFT8(x)	/* 00=dis; 01=1x; 10=2x; 11=3x */
-#define PHY_M_EC_MAC_S(x)		SHIFT4(x)	/* 01X=0; 110=2.5; 111=25 (MHz) */
-
-#define MAC_TX_CLK_0_MHZ	2
-#define MAC_TX_CLK_2_5_MHZ	6
-#define MAC_TX_CLK_25_MHZ	7
-
-/*****  PHY_MARV_LED_CTRL	16 bit r/w	LED Control Reg *****/
-#define PHY_M_LEDC_DIS_LED	(1<<15)	/* Bit 15:	Disable LED */
-#define PHY_M_LEDC_PULS_MSK	(7<<12)	/* Bit 14..12:  Pulse Stretch Mask */
-#define PHY_M_LEDC_F_INT	(1<<11)	/* Bit 11:	Force Interrupt */
-#define PHY_M_LEDC_BL_R_MSK	(7<<8)	/* Bit 10.. 8:  Blink Rate Mask */
-									/* Bit  7.. 5:	reserved */
-#define PHY_M_LEDC_LINK_MSK	(3<<3)	/* Bit  4.. 3:	Link Control Mask */
-#define PHY_M_LEDC_DP_CTRL	(1<<2)	/* Bit  2:	Duplex Control */
-#define PHY_M_LEDC_RX_CTRL	(1<<1)	/* Bit  1:	Rx activity / Link */
-#define PHY_M_LEDC_TX_CTRL	(1<<0)	/* Bit  0:	Tx activity / Link */
-
-#define PHY_M_LED_PULS_DUR(x)	SHIFT12(x)	/* Pulse Stretch Duration */
-
-#define	PULS_NO_STR		0		/* no pulse stretching */
-#define	PULS_21MS		1		/* 21 ms to 42 ms */
-#define PULS_42MS		2		/* 42 ms to 84 ms */
-#define PULS_84MS		3		/* 84 ms to 170 ms */
-#define PULS_170MS		4		/* 170 ms to 340 ms */
-#define PULS_340MS		5		/* 340 ms to 670 ms */
-#define PULS_670MS		6		/* 670 ms to 1.3 s */
-#define PULS_1300MS		7		/* 1.3 s to 2.7 s */
-
-#define PHY_M_LED_BLINK_RT(x)	SHIFT8(x)	/* Blink Rate */
-
-#define BLINK_42MS		0		/* 42 ms */
-#define BLINK_84MS		1		/* 84 ms */
-#define BLINK_170MS		2		/* 170 ms */
-#define BLINK_340MS		3		/* 340 ms */
-#define BLINK_670MS		4		/* 670 ms */
-								/* values 5 - 7: reserved */
-
-/*****  PHY_MARV_LED_OVER	16 bit r/w	Manual LED Override Reg *****/
-#define PHY_M_LED_MO_DUP(x)		SHIFT10(x)	/* Bit 11..10:  Duplex */
-#define PHY_M_LED_MO_10(x)		SHIFT8(x)	/* Bit  9.. 8:  Link 10 */
-#define PHY_M_LED_MO_100(x)		SHIFT6(x)	/* Bit  7.. 6:  Link 100 */
-#define PHY_M_LED_MO_1000(x)	SHIFT4(x)	/* Bit  5.. 4:  Link 1000 */
-#define PHY_M_LED_MO_RX(x)		SHIFT2(x)	/* Bit  3.. 2:  Rx */
-#define PHY_M_LED_MO_TX(x)		SHIFT0(x)	/* Bit  1.. 0:  Tx */
-
-#define MO_LED_NORM			0
-#define MO_LED_BLINK		1
-#define MO_LED_OFF			2
-#define MO_LED_ON			3
-
-/*****  PHY_MARV_EXT_CTRL_2	16 bit r/w	Ext. PHY Specific Ctrl 2 *****/
-									/* Bit 15.. 7:	reserved */
-#define PHY_M_EC2_FI_IMPED	(1<<6)	/* Bit  6:	Fiber Input  Impedance */
-#define PHY_M_EC2_FO_IMPED	(1<<5)	/* Bit  5:	Fiber Output Impedance */
-#define PHY_M_EC2_FO_M_CLK	(1<<4)	/* Bit  4:	Fiber Mode Clock Enable */
-#define PHY_M_EC2_FO_BOOST	(1<<3)	/* Bit  3:	Fiber Output Boost */
-#define PHY_M_EC2_FO_AM_MSK	7		/* Bit  2.. 0:	Fiber Output Amplitude */
-
-/*****	PHY_MARV_EXT_P_STAT 16 bit r/w	Ext. PHY Specific Status *****/
-#define PHY_M_FC_AUTO_SEL	(1<<15)	/* Bit 15:	Fiber/Copper Auto Sel. dis. */
-#define PHY_M_FC_AN_REG_ACC (1<<14) /* Bit 14:	Fiber/Copper Autoneg. reg acc */
-#define PHY_M_FC_RESULUTION (1<<13)	/* Bit 13:	Fiber/Copper Resulution */
-#define PHY_M_SER_IF_AN_BP  (1<<12) /* Bit 12:	Ser IF autoneg. bypass enable */
-#define PHY_M_SER_IF_BP_ST	(1<<11) /* Bit 11:	Ser IF autoneg. bypass status */
-#define PHY_M_IRQ_POLARITY	(1<<10) /* Bit 10:	IRQ polarity */
-									/* Bit 9..4: reserved */
-#define PHY_M_UNDOC1		(1<< 7) /* undocumented bit !! */
-#define PHY_M_MODE_MASK		(0xf<<0)/* Bit 3..0: copy of HWCFG MODE[3:0] */
-
-
-/*****  PHY_MARV_CABLE_DIAG	16 bit r/o	Cable Diagnostic Reg *****/
-#define PHY_M_CABD_ENA_TEST	(1<<15)	/* Bit 15:	Enable Test */
-#define PHY_M_CABD_STAT_MSK	(3<<13)	/* Bit 14..13:	Status */
-									/* Bit 12.. 8:	reserved */
-#define PHY_M_CABD_DIST_MSK	0xff	/* Bit  7.. 0:	Distance */
-
-/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
-#define CABD_STAT_NORMAL	0
-#define CABD_STAT_SHORT		1
-#define CABD_STAT_OPEN		2
-#define CABD_STAT_FAIL		3
-
-
-/*
- * GMAC registers
- *
- * The GMAC registers are 16 or 32 bits wide.
- * The GMACs host processor interface is 16 bits wide,
- * therefore ALL registers will be addressed with 16 bit accesses.
- *
- * The following macros are provided to access the GMAC registers
- * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(),
- * GM_INHASH(), and GM_OUTHASH().
- * The macros are defined in SkGeHw.h.
- *
- * Note:	NA reg	= Network Address e.g DA, SA etc.
- *
- */
-
-/* Port Registers */
-#define GM_GP_STAT		0x0000		/* 16 bit r/o	General Purpose Status */
-#define GM_GP_CTRL		0x0004		/* 16 bit r/w	General Purpose Control */
-#define GM_TX_CTRL		0x0008		/* 16 bit r/w	Transmit Control Reg. */
-#define GM_RX_CTRL		0x000c		/* 16 bit r/w	Receive Control Reg. */
-#define GM_TX_FLOW_CTRL	0x0010		/* 16 bit r/w	Transmit Flow-Control */
-#define GM_TX_PARAM		0x0014		/* 16 bit r/w	Transmit Parameter Reg. */
-#define GM_SERIAL_MODE	0x0018		/* 16 bit r/w	Serial Mode Register */
-
-/* Source Address Registers */
-#define GM_SRC_ADDR_1L	0x001c		/* 16 bit r/w	Source Address 1 (low) */
-#define GM_SRC_ADDR_1M	0x0020		/* 16 bit r/w	Source Address 1 (middle) */
-#define GM_SRC_ADDR_1H	0x0024		/* 16 bit r/w	Source Address 1 (high) */
-#define GM_SRC_ADDR_2L	0x0028		/* 16 bit r/w	Source Address 2 (low) */
-#define GM_SRC_ADDR_2M	0x002c		/* 16 bit r/w	Source Address 2 (middle) */
-#define GM_SRC_ADDR_2H	0x0030		/* 16 bit r/w	Source Address 2 (high) */
-
-/* Multicast Address Hash Registers */
-#define GM_MC_ADDR_H1	0x0034		/* 16 bit r/w	Multicast Address Hash 1 */
-#define GM_MC_ADDR_H2	0x0038		/* 16 bit r/w	Multicast Address Hash 2 */
-#define GM_MC_ADDR_H3	0x003c		/* 16 bit r/w	Multicast Address Hash 3 */
-#define GM_MC_ADDR_H4	0x0040		/* 16 bit r/w	Multicast Address Hash 4 */
-
-/* Interrupt Source Registers */
-#define GM_TX_IRQ_SRC	0x0044		/* 16 bit r/o	Tx Overflow IRQ Source */
-#define GM_RX_IRQ_SRC	0x0048		/* 16 bit r/o	Rx Overflow IRQ Source */
-#define GM_TR_IRQ_SRC	0x004c		/* 16 bit r/o	Tx/Rx Over. IRQ Source */
-
-/* Interrupt Mask Registers */
-#define GM_TX_IRQ_MSK	0x0050		/* 16 bit r/w	Tx Overflow IRQ Mask */
-#define GM_RX_IRQ_MSK	0x0054		/* 16 bit r/w	Rx Overflow IRQ Mask */
-#define GM_TR_IRQ_MSK	0x0058		/* 16 bit r/w	Tx/Rx Over. IRQ Mask */
-
-/* Serial Management Interface (SMI) Registers */
-#define GM_SMI_CTRL		0x0080		/* 16 bit r/w	SMI Control Register */
-#define GM_SMI_DATA		0x0084		/* 16 bit r/w	SMI Data Register */
-#define GM_PHY_ADDR		0x0088		/* 16 bit r/w	GPHY Address Register */
-
-/* MIB Counters */
-#define GM_MIB_CNT_BASE	0x0100		/* Base Address of MIB Counters */
-#define GM_MIB_CNT_SIZE	44			/* Number of MIB Counters */
-
-/*
- * MIB Counters base address definitions (low word) -
- * use offset 4 for access to high word	(32 bit r/o)
- */
-#define GM_RXF_UC_OK \
-			(GM_MIB_CNT_BASE + 0)	/* Unicast Frames Received OK */
-#define GM_RXF_BC_OK \
-			(GM_MIB_CNT_BASE + 8)	/* Broadcast Frames Received OK */
-#define GM_RXF_MPAUSE \
-			(GM_MIB_CNT_BASE + 16)	/* Pause MAC Ctrl Frames Received */
-#define GM_RXF_MC_OK \
-			(GM_MIB_CNT_BASE + 24)	/* Multicast Frames Received OK */
-#define GM_RXF_FCS_ERR \
-			(GM_MIB_CNT_BASE + 32)	/* Rx Frame Check Seq. Error */
-	/* GM_MIB_CNT_BASE + 40:	reserved */
-#define GM_RXO_OK_LO \
-			(GM_MIB_CNT_BASE + 48)	/* Octets Received OK Low */
-#define GM_RXO_OK_HI \
-			(GM_MIB_CNT_BASE + 56)	/* Octets Received OK High */
-#define GM_RXO_ERR_LO \
-			(GM_MIB_CNT_BASE + 64)	/* Octets Received Invalid Low */
-#define GM_RXO_ERR_HI \
-			(GM_MIB_CNT_BASE + 72)	/* Octets Received Invalid High */
-#define GM_RXF_SHT \
-			(GM_MIB_CNT_BASE + 80)	/* Frames <64 Byte Received OK */
-#define GM_RXE_FRAG \
-			(GM_MIB_CNT_BASE + 88)	/* Frames <64 Byte Received with FCS Err */
-#define GM_RXF_64B \
-			(GM_MIB_CNT_BASE + 96)	/* 64 Byte Rx Frame */
-#define GM_RXF_127B \
-			(GM_MIB_CNT_BASE + 104)	/* 65-127 Byte Rx Frame */
-#define GM_RXF_255B \
-			(GM_MIB_CNT_BASE + 112)	/* 128-255 Byte Rx Frame */
-#define GM_RXF_511B \
-			(GM_MIB_CNT_BASE + 120)	/* 256-511 Byte Rx Frame */
-#define GM_RXF_1023B \
-			(GM_MIB_CNT_BASE + 128)	/* 512-1023 Byte Rx Frame */
-#define GM_RXF_1518B \
-			(GM_MIB_CNT_BASE + 136)	/* 1024-1518 Byte Rx Frame */
-#define GM_RXF_MAX_SZ \
-			(GM_MIB_CNT_BASE + 144)	/* 1519-MaxSize Byte Rx Frame */
-#define GM_RXF_LNG_ERR \
-			(GM_MIB_CNT_BASE + 152)	/* Rx Frame too Long Error */
-#define GM_RXF_JAB_PKT \
-			(GM_MIB_CNT_BASE + 160)	/* Rx Jabber Packet Frame */
-	/* GM_MIB_CNT_BASE + 168:	reserved */
-#define GM_RXE_FIFO_OV \
-			(GM_MIB_CNT_BASE + 176)	/* Rx FIFO overflow Event */
-	/* GM_MIB_CNT_BASE + 184:	reserved */
-#define GM_TXF_UC_OK \
-			(GM_MIB_CNT_BASE + 192)	/* Unicast Frames Xmitted OK */
-#define GM_TXF_BC_OK \
-			(GM_MIB_CNT_BASE + 200)	/* Broadcast Frames Xmitted OK */
-#define GM_TXF_MPAUSE \
-			(GM_MIB_CNT_BASE + 208)	/* Pause MAC Ctrl Frames Xmitted */
-#define GM_TXF_MC_OK \
-			(GM_MIB_CNT_BASE + 216)	/* Multicast Frames Xmitted OK */
-#define GM_TXO_OK_LO \
-			(GM_MIB_CNT_BASE + 224)	/* Octets Transmitted OK Low */
-#define GM_TXO_OK_HI \
-			(GM_MIB_CNT_BASE + 232)	/* Octets Transmitted OK High */
-#define GM_TXF_64B \
-			(GM_MIB_CNT_BASE + 240)	/* 64 Byte Tx Frame */
-#define GM_TXF_127B \
-			(GM_MIB_CNT_BASE + 248)	/* 65-127 Byte Tx Frame */
-#define GM_TXF_255B \
-			(GM_MIB_CNT_BASE + 256)	/* 128-255 Byte Tx Frame */
-#define GM_TXF_511B \
-			(GM_MIB_CNT_BASE + 264)	/* 256-511 Byte Tx Frame */
-#define GM_TXF_1023B \
-			(GM_MIB_CNT_BASE + 272)	/* 512-1023 Byte Tx Frame */
-#define GM_TXF_1518B \
-			(GM_MIB_CNT_BASE + 280)	/* 1024-1518 Byte Tx Frame */
-#define GM_TXF_MAX_SZ \
-			(GM_MIB_CNT_BASE + 288)	/* 1519-MaxSize Byte Tx Frame */
-	/* GM_MIB_CNT_BASE + 296:	reserved */
-#define GM_TXF_COL \
-			(GM_MIB_CNT_BASE + 304)	/* Tx Collision */
-#define GM_TXF_LAT_COL \
-			(GM_MIB_CNT_BASE + 312)	/* Tx Late Collision */
-#define GM_TXF_ABO_COL \
-			(GM_MIB_CNT_BASE + 320)	/* Tx aborted due to Exces. Col. */
-#define GM_TXF_MUL_COL \
-			(GM_MIB_CNT_BASE + 328)	/* Tx Multiple Collision */
-#define GM_TXF_SNG_COL \
-			(GM_MIB_CNT_BASE + 336)	/* Tx Single Collision */
-#define GM_TXE_FIFO_UR \
-			(GM_MIB_CNT_BASE + 344)	/* Tx FIFO Underrun Event */
-
-/*----------------------------------------------------------------------------*/
-/*
- * GMAC Bit Definitions
- *
- * If the bit access behaviour differs from the register access behaviour
- * (r/w, r/o) this is documented after the bit number.
- * The following bit access behaviours are used:
- *	(sc)	self clearing
- *	(r/o)	read only
- */
-
-/*	GM_GP_STAT	16 bit r/o	General Purpose Status Register */
-#define GM_GPSR_SPEED		(1<<15) /* Bit 15:	Port Speed (1 = 100 Mbps) */
-#define GM_GPSR_DUPLEX		(1<<14) /* Bit 14:	Duplex Mode (1 = Full) */
-#define GM_GPSR_FC_TX_DIS	(1<<13) /* Bit 13:	Tx Flow-Control Mode Disabled */
-#define GM_GPSR_LINK_UP		(1<<12)	/* Bit 12:	Link Up Status */
-#define GM_GPSR_PAUSE		(1<<11)	/* Bit 11:	Pause State */
-#define GM_GPSR_TX_ACTIVE	(1<<10)	/* Bit 10:	Tx in Progress */
-#define GM_GPSR_EXC_COL		(1<<9)	/* Bit  9:	Excessive Collisions Occured */
-#define GM_GPSR_LAT_COL		(1<<8)	/* Bit  8:	Late Collisions Occured */
-								/* Bit  7..6:	reserved */
-#define GM_GPSR_PHY_ST_CH	(1<<5)	/* Bit  5:	PHY Status Change */
-#define GM_GPSR_GIG_SPEED	(1<<4)	/* Bit  4:	Gigabit Speed (1 = 1000 Mbps) */
-#define GM_GPSR_PART_MODE	(1<<3)	/* Bit  3:	Partition mode */
-#define GM_GPSR_FC_RX_DIS	(1<<2)	/* Bit  2:	Rx Flow-Control Mode Disabled */
-#define GM_GPSR_PROM_EN		(1<<1)	/* Bit  1:	Promiscuous Mode Enabled */
-								/* Bit  0:	reserved */
-	
-/*	GM_GP_CTRL	16 bit r/w	General Purpose Control Register */
-								/* Bit 15:	reserved */
-#define GM_GPCR_PROM_ENA	(1<<14)	/* Bit 14:	Enable Promiscuous Mode */
-#define GM_GPCR_FC_TX_DIS	(1<<13) /* Bit 13:	Disable Tx Flow-Control Mode */
-#define GM_GPCR_TX_ENA		(1<<12) /* Bit 12:	Enable Transmit */
-#define GM_GPCR_RX_ENA		(1<<11) /* Bit 11:	Enable Receive */
-#define GM_GPCR_BURST_ENA	(1<<10)	/* Bit 10:	Enable Burst Mode */
-#define GM_GPCR_LOOP_ENA	(1<<9)	/* Bit  9:	Enable MAC Loopback Mode */
-#define GM_GPCR_PART_ENA	(1<<8)	/* Bit  8:	Enable Partition Mode */
-#define GM_GPCR_GIGS_ENA	(1<<7)	/* Bit  7:	Gigabit Speed (1000 Mbps) */
-#define GM_GPCR_FL_PASS		(1<<6)	/* Bit  6:	Force Link Pass */
-#define GM_GPCR_DUP_FULL	(1<<5)	/* Bit  5:	Full Duplex Mode */
-#define GM_GPCR_FC_RX_DIS	(1<<4)	/* Bit  4:	Disable Rx Flow-Control Mode */
-#define GM_GPCR_SPEED_100	(1<<3)  /* Bit  3:	Port Speed 100 Mbps */
-#define GM_GPCR_AU_DUP_DIS	(1<<2)	/* Bit  2:	Disable Auto-Update Duplex */
-#define GM_GPCR_AU_FCT_DIS	(1<<1)	/* Bit  1:	Disable Auto-Update Flow-C. */
-#define GM_GPCR_AU_SPD_DIS	(1<<0)	/* Bit  0:	Disable Auto-Update Speed */
-
-#define GM_GPCR_SPEED_1000	(GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
-#define GM_GPCR_AU_ALL_DIS	(GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
-							 GM_GPCR_AU_SPD_DIS)
-	
-/*	GM_TX_CTRL				16 bit r/w	Transmit Control Register */
-#define GM_TXCR_FORCE_JAM	(1<<15)	/* Bit 15:	Force Jam / Flow-Control */
-#define GM_TXCR_CRC_DIS		(1<<14)	/* Bit 14:	Disable insertion of CRC */
-#define GM_TXCR_PAD_DIS		(1<<13)	/* Bit 13:	Disable padding of packets */
-#define GM_TXCR_COL_THR_MSK	(7<<10)	/* Bit 12..10:	Collision Threshold */
-
-#define TX_COL_THR(x)		(SHIFT10(x) & GM_TXCR_COL_THR_MSK)
-
-#define TX_COL_DEF			0x04
-	
-/*	GM_RX_CTRL				16 bit r/w	Receive Control Register */
-#define GM_RXCR_UCF_ENA		(1<<15)	/* Bit 15:	Enable Unicast filtering */
-#define GM_RXCR_MCF_ENA		(1<<14)	/* Bit 14:	Enable Multicast filtering */
-#define GM_RXCR_CRC_DIS		(1<<13)	/* Bit 13:	Remove 4-byte CRC */
-#define GM_RXCR_PASS_FC		(1<<12)	/* Bit 12:	Pass FC packets to FIFO */
-	
-/*	GM_TX_PARAM				16 bit r/w	Transmit Parameter Register */
-#define GM_TXPA_JAMLEN_MSK	(0x03<<14)	/* Bit 15..14:	Jam Length */
-#define GM_TXPA_JAMIPG_MSK	(0x1f<<9)	/* Bit 13..9:	Jam IPG */
-#define GM_TXPA_JAMDAT_MSK	(0x1f<<4)	/* Bit  8..4:	IPG Jam to Data */
-								/* Bit  3..0:	reserved */
-
-#define TX_JAM_LEN_VAL(x)	(SHIFT14(x) & GM_TXPA_JAMLEN_MSK)
-#define TX_JAM_IPG_VAL(x)	(SHIFT9(x) & GM_TXPA_JAMIPG_MSK)
-#define TX_IPG_JAM_DATA(x)	(SHIFT4(x) & GM_TXPA_JAMDAT_MSK)
-
-#define TX_JAM_LEN_DEF		0x03
-#define TX_JAM_IPG_DEF		0x0b
-#define TX_IPG_JAM_DEF		0x1c
-
-/*	GM_SERIAL_MODE			16 bit r/w	Serial Mode Register */
-#define GM_SMOD_DATABL_MSK	(0x1f<<11)	/* Bit 15..11:	Data Blinder (r/o) */
-#define GM_SMOD_LIMIT_4		(1<<10)	/* Bit 10:	4 consecutive Tx trials */
-#define GM_SMOD_VLAN_ENA	(1<<9)	/* Bit  9:	Enable VLAN  (Max. Frame Len) */
-#define GM_SMOD_JUMBO_ENA	(1<<8)	/* Bit  8:	Enable Jumbo (Max. Frame Len) */
-								/* Bit  7..5:	reserved */
-#define GM_SMOD_IPG_MSK		0x1f	/* Bit 4..0:	Inter-Packet Gap (IPG) */
-	
-#define DATA_BLIND_VAL(x)	(SHIFT11(x) & GM_SMOD_DATABL_MSK)
-#define DATA_BLIND_DEF		0x04
-
-#define IPG_DATA_VAL(x)		(x & GM_SMOD_IPG_MSK)
-#define IPG_DATA_DEF		0x1e
-
-/*	GM_SMI_CTRL				16 bit r/w	SMI Control Register */
-#define GM_SMI_CT_PHY_A_MSK	(0x1f<<11)	/* Bit 15..11:	PHY Device Address */
-#define GM_SMI_CT_REG_A_MSK	(0x1f<<6)	/* Bit 10.. 6:	PHY Register Address */
-#define GM_SMI_CT_OP_RD		(1<<5)	/* Bit  5:	OpCode Read (0=Write)*/
-#define GM_SMI_CT_RD_VAL	(1<<4)	/* Bit  4:	Read Valid (Read completed) */
-#define GM_SMI_CT_BUSY		(1<<3)	/* Bit  3:	Busy (Operation in progress) */
-								/* Bit   2..0:	reserved */
-	
-#define GM_SMI_CT_PHY_AD(x)	(SHIFT11(x) & GM_SMI_CT_PHY_A_MSK)
-#define GM_SMI_CT_REG_AD(x)	(SHIFT6(x) & GM_SMI_CT_REG_A_MSK)
-
-	/*	GM_PHY_ADDR				16 bit r/w	GPHY Address Register */
-								/* Bit  15..6:	reserved */
-#define GM_PAR_MIB_CLR		(1<<5)	/* Bit  5:	Set MIB Clear Counter Mode */
-#define GM_PAR_MIB_TST		(1<<4)	/* Bit  4:	MIB Load Counter (Test Mode) */
-								/* Bit   3..0:	reserved */
-	
-/* Receive Frame Status Encoding */
-#define GMR_FS_LEN	(0xffffUL<<16)	/* Bit 31..16:	Rx Frame Length */
-								/* Bit  15..14:	reserved */
-#define GMR_FS_VLAN		(1L<<13)	/* Bit 13:	VLAN Packet */
-#define GMR_FS_JABBER	(1L<<12)	/* Bit 12:	Jabber Packet */
-#define GMR_FS_UN_SIZE	(1L<<11)	/* Bit 11:	Undersize Packet */
-#define GMR_FS_MC		(1L<<10)	/* Bit 10:	Multicast Packet */
-#define GMR_FS_BC		(1L<<9)		/* Bit  9:	Broadcast Packet */
-#define GMR_FS_RX_OK	(1L<<8)		/* Bit  8:	Receive OK (Good Packet) */
-#define GMR_FS_GOOD_FC	(1L<<7)		/* Bit  7:	Good Flow-Control Packet */
-#define GMR_FS_BAD_FC	(1L<<6)		/* Bit  6:	Bad  Flow-Control Packet */
-#define GMR_FS_MII_ERR	(1L<<5)		/* Bit  5:	MII Error */
-#define GMR_FS_LONG_ERR	(1L<<4)		/* Bit  4:	Too Long Packet */
-#define GMR_FS_FRAGMENT	(1L<<3)		/* Bit  3:	Fragment */
-								/* Bit  2:	reserved */
-#define GMR_FS_CRC_ERR	(1L<<1)		/* Bit  1:	CRC Error */
-#define GMR_FS_RX_FF_OV	(1L<<0)		/* Bit  0:	Rx FIFO Overflow */
-
-/*
- * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR)
- */
-#define GMR_FS_ANY_ERR	(GMR_FS_CRC_ERR | \
-			GMR_FS_LONG_ERR | \
-			GMR_FS_MII_ERR | \
-			GMR_FS_BAD_FC | \
-			GMR_FS_GOOD_FC | \
-			GMR_FS_JABBER)
-
-/* Rx GMAC FIFO Flush Mask (default) */
-#define RX_FF_FL_DEF_MSK	(GMR_FS_CRC_ERR | \
-			GMR_FS_RX_FF_OV | \
-			GMR_FS_MII_ERR | \
-			GMR_FS_BAD_FC | \
-			GMR_FS_GOOD_FC | \
-			GMR_FS_UN_SIZE | \
-			GMR_FS_JABBER)
-
-/* typedefs *******************************************************************/
-
-
-/* function prototypes ********************************************************/
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_XMAC_H */
diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c
deleted file mode 100644
index 6e6c56aa6d6f..000000000000
--- a/drivers/net/sk98lin/skaddr.c
+++ /dev/null
@@ -1,1788 +0,0 @@
-/******************************************************************************
- *
- * Name:	skaddr.c
- * Project:	Gigabit Ethernet Adapters, ADDR-Module
- * Version:	$Revision: 1.52 $
- * Date:	$Date: 2003/06/02 13:46:15 $
- * Purpose:	Manage Addresses (Multicast and Unicast) and Promiscuous Mode.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage multicast addresses, address override,
- * and promiscuous mode on GEnesis and Yukon adapters.
- *
- * Address Layout:
- *	port address:		physical MAC address
- *	1st exact match:	logical MAC address (GEnesis only)
- *	2nd exact match:	RLMT multicast (GEnesis only)
- *	exact match 3-13:	OS-specific multicasts (GEnesis only)
- *
- * Include File Hierarchy:
- *
- *	"skdrv1st.h"
- *	"skdrv2nd.h"
- *
- ******************************************************************************/
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skaddr.c,v 1.52 2003/06/02 13:46:15 tschilli Exp $ (C) Marvell.";
-#endif /* DEBUG ||!LINT || !SK_SLIM */
-
-#define __SKADDR_C
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* cplusplus */
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* defines ********************************************************************/
-
-
-#define XMAC_POLY	0xEDB88320UL	/* CRC32-Poly - XMAC: Little Endian */
-#define GMAC_POLY	0x04C11DB7L	/* CRC16-Poly - GMAC: Little Endian */
-#define HASH_BITS	6				/* #bits in hash */
-#define	SK_MC_BIT	0x01
-
-/* Error numbers and messages. */
-
-#define SKERR_ADDR_E001		(SK_ERRBASE_ADDR + 0)
-#define SKERR_ADDR_E001MSG	"Bad Flags."
-#define SKERR_ADDR_E002		(SKERR_ADDR_E001 + 1)
-#define SKERR_ADDR_E002MSG	"New Error."
-
-/* typedefs *******************************************************************/
-
-/* None. */
-
-/* global variables ***********************************************************/
-
-/* 64-bit hash values with all bits set. */
-
-static const SK_U16	OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
-
-/* local variables ************************************************************/
-
-#ifdef DEBUG
-static int	Next0[SK_MAX_MACS] = {0};
-#endif	/* DEBUG */
-
-static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			   SK_MAC_ADDR *pMc, int Flags);
-static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			     int Flags);
-static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
-static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
-				       SK_U32 PortNumber, int NewPromMode);
-static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			   SK_MAC_ADDR *pMc, int Flags);
-static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber,
-			     int Flags);
-static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber);
-static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC,
-				       SK_U32 PortNumber, int NewPromMode);
-
-/* functions ******************************************************************/
-
-/******************************************************************************
- *
- *	SkAddrInit - initialize data, set state to init
- *
- * Description:
- *
- *	SK_INIT_DATA
- *	============
- *
- *	This routine clears the multicast tables and resets promiscuous mode.
- *	Some entries are reserved for the "logical MAC address", the
- *	SK-RLMT multicast address, and the BPDU multicast address.
- *
- *
- *	SK_INIT_IO
- *	==========
- *
- *	All permanent MAC addresses are read from EPROM.
- *	If the current MAC addresses are not already set in software,
- *	they are set to the values of the permanent addresses.
- *	The current addresses are written to the corresponding MAC.
- *
- *
- *	SK_INIT_RUN
- *	===========
- *
- *	Nothing.
- *
- * Context:
- *	init, pageable
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- */
-int	SkAddrInit(
-SK_AC	*pAC,	/* the adapter context */
-SK_IOC	IoC,	/* I/O context */
-int		Level)	/* initialization level */
-{
-	int			j;
-	SK_U32		i;
-	SK_U8		*InAddr;
-	SK_U16		*OutAddr;
-	SK_ADDR_PORT	*pAPort;
-
-	switch (Level) {
-	case SK_INIT_DATA:
-		SK_MEMSET((char *) &pAC->Addr, (SK_U8) 0,
-            (SK_U16) sizeof(SK_ADDR));
-
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			pAPort = &pAC->Addr.Port[i];
-			pAPort->PromMode = SK_PROM_MODE_NONE;
-			
-			pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
-			pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
-			pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
-			pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
-		}
-#ifdef xDEBUG
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			if (pAC->Addr.Port[i].NextExactMatchRlmt <
-				SK_ADDR_FIRST_MATCH_RLMT) {
-				Next0[i] |= 4;
-			}
-		}
-#endif	/* DEBUG */
-		/* pAC->Addr.InitDone = SK_INIT_DATA; */
-		break;
-
-    case SK_INIT_IO:
-#ifndef SK_NO_RLMT
-		for (i = 0; i < SK_MAX_NETS; i++) {
-			pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort;
-		}
-#endif /* !SK_NO_RLMT */
-#ifdef xDEBUG
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			if (pAC->Addr.Port[i].NextExactMatchRlmt <
-				SK_ADDR_FIRST_MATCH_RLMT) {
-				Next0[i] |= 8;
-			}
-		}
-#endif	/* DEBUG */
-		
-		/* Read permanent logical MAC address from Control Register File. */
-		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
-			InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j];
-			SK_IN8(IoC, B2_MAC_1 + j, InAddr);
-		}
-
-		if (!pAC->Addr.Net[0].CurrentMacAddressSet) {
-			/* Set the current logical MAC address to the permanent one. */
-			pAC->Addr.Net[0].CurrentMacAddress =
-				pAC->Addr.Net[0].PermanentMacAddress;
-			pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE;
-		}
-
-		/* Set the current logical MAC address. */
-		pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] =
-			pAC->Addr.Net[0].CurrentMacAddress;
-#if SK_MAX_NETS > 1
-		/* Set logical MAC address for net 2 to (log | 3). */
-		if (!pAC->Addr.Net[1].CurrentMacAddressSet) {
-			pAC->Addr.Net[1].PermanentMacAddress =
-				pAC->Addr.Net[0].PermanentMacAddress;
-			pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3;
-			/* Set the current logical MAC address to the permanent one. */
-			pAC->Addr.Net[1].CurrentMacAddress =
-				pAC->Addr.Net[1].PermanentMacAddress;
-			pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE;
-		}
-#endif	/* SK_MAX_NETS > 1 */
-
-#ifdef DEBUG
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
-					i,
-					pAC->Addr.Net[i].PermanentMacAddress.a[0],
-					pAC->Addr.Net[i].PermanentMacAddress.a[1],
-					pAC->Addr.Net[i].PermanentMacAddress.a[2],
-					pAC->Addr.Net[i].PermanentMacAddress.a[3],
-					pAC->Addr.Net[i].PermanentMacAddress.a[4],
-					pAC->Addr.Net[i].PermanentMacAddress.a[5]))
-			
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n",
-					i,
-					pAC->Addr.Net[i].CurrentMacAddress.a[0],
-					pAC->Addr.Net[i].CurrentMacAddress.a[1],
-					pAC->Addr.Net[i].CurrentMacAddress.a[2],
-					pAC->Addr.Net[i].CurrentMacAddress.a[3],
-					pAC->Addr.Net[i].CurrentMacAddress.a[4],
-					pAC->Addr.Net[i].CurrentMacAddress.a[5]))
-		}
-#endif	/* DEBUG */
-
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			pAPort = &pAC->Addr.Port[i];
-
-			/* Read permanent port addresses from Control Register File. */
-			for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
-				InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j];
-				SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr);
-			}
-
-			if (!pAPort->CurrentMacAddressSet) {
-				/*
-				 * Set the current and previous physical MAC address
-				 * of this port to its permanent MAC address.
-				 */
-				pAPort->CurrentMacAddress = pAPort->PermanentMacAddress;
-				pAPort->PreviousMacAddress = pAPort->PermanentMacAddress;
-				pAPort->CurrentMacAddressSet = SK_TRUE;
-			}
-
-			/* Set port's current physical MAC address. */
-			OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-#ifdef GENESIS
-			if (pAC->GIni.GIGenesis) {
-				XM_OUTADDR(IoC, i, XM_SA, OutAddr);
-			}
-#endif /* GENESIS */
-#ifdef YUKON
-			if (!pAC->GIni.GIGenesis) {
-				GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr);
-			}
-#endif /* YUKON */
-#ifdef DEBUG
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-					pAPort->PermanentMacAddress.a[0],
-					pAPort->PermanentMacAddress.a[1],
-					pAPort->PermanentMacAddress.a[2],
-					pAPort->PermanentMacAddress.a[3],
-					pAPort->PermanentMacAddress.a[4],
-					pAPort->PermanentMacAddress.a[5]))
-			
-			SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT,
-				("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-					pAPort->CurrentMacAddress.a[0],
-					pAPort->CurrentMacAddress.a[1],
-					pAPort->CurrentMacAddress.a[2],
-					pAPort->CurrentMacAddress.a[3],
-					pAPort->CurrentMacAddress.a[4],
-					pAPort->CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-		}
-		/* pAC->Addr.InitDone = SK_INIT_IO; */
-		break;
-
-	case SK_INIT_RUN:
-#ifdef xDEBUG
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			if (pAC->Addr.Port[i].NextExactMatchRlmt <
-				SK_ADDR_FIRST_MATCH_RLMT) {
-				Next0[i] |= 16;
-			}
-		}
-#endif	/* DEBUG */
-
-		/* pAC->Addr.InitDone = SK_INIT_RUN; */
-		break;
-
-	default:	/* error */
-		break;
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrInit */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrMcClear - clear the multicast table
- *
- * Description:
- *	This routine clears the multicast table.
- *
- *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- *	immediately.
- *
- *	It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according
- *	to the adapter in use. The real work is done there.
- *
- * Context:
- *	runtime, pageable
- *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- *	may be called after SK_INIT_IO without limitation
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrMcClear(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber,	/* Index of affected port */
-int		Flags)		/* permanent/non-perm, sw-only */
-{
-	int ReturnCode;
-	
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-	
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags);
-	}
-	else {
-		ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags);
-	}
-
-	return (ReturnCode);
-
-}	/* SkAddrMcClear */
-
-#endif /* !SK_SLIM */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrXmacMcClear - clear the multicast table
- *
- * Description:
- *	This routine clears the multicast table
- *	(either entry 2 or entries 3-16 and InexactFilter) of the given port.
- *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- *	immediately.
- *
- * Context:
- *	runtime, pageable
- *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- *	may be called after SK_INIT_IO without limitation
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrXmacMcClear(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber,	/* Index of affected port */
-int		Flags)		/* permanent/non-perm, sw-only */
-{
-	int i;
-
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-
-		/* Clear RLMT multicast addresses. */
-		pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT;
-	}
-	else {	/* not permanent => DRV */
-
-		/* Clear InexactFilter */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
-		}
-
-		/* Clear DRV multicast addresses. */
-
-		pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV;
-	}
-
-	if (!(Flags & SK_MC_SW_ONLY)) {
-		(void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrXmacMcClear */
-
-#endif /* !SK_SLIM */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrGmacMcClear - clear the multicast table
- *
- * Description:
- *	This routine clears the multicast hashing table (InexactFilter)
- *	(either the RLMT or the driver bits) of the given port.
- *
- *	If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated
- *	immediately.
- *
- * Context:
- *	runtime, pageable
- *	may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY
- *	may be called after SK_INIT_IO without limitation
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrGmacMcClear(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber,	/* Index of affected port */
-int		Flags)		/* permanent/non-perm, sw-only */
-{
-	int i;
-
-#ifdef DEBUG
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
-#endif	/* DEBUG */
-
-	/* Clear InexactFilter */
-	for (i = 0; i < 8; i++) {
-		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
-	}
-	
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-		
-		/* Copy DRV bits to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
-			
-			/* Clear InexactRlmtFilter. */
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0;
-
-		}		
-	}
-	else {	/* not permanent => DRV */
-		
-		/* Copy RLMT bits to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
-			
-			/* Clear InexactDrvFilter. */
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0;
-		}
-	}
-	
-#ifdef DEBUG
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7]))
-#endif	/* DEBUG */
-	
-	if (!(Flags & SK_MC_SW_ONLY)) {
-		(void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
-	}
-	
-	return (SK_ADDR_SUCCESS);
-
-}	/* SkAddrGmacMcClear */
-
-#ifndef SK_ADDR_CHEAT
-
-/******************************************************************************
- *
- *	SkXmacMcHash - hash multicast address
- *
- * Description:
- *	This routine computes the hash value for a multicast address.
- *	A CRC32 algorithm is used.
- *
- * Notes:
- *	The code was adapted from the XaQti data sheet.
- *
- * Context:
- *	runtime, pageable
- *
- * Returns:
- *	Hash value of multicast address.
- */
-static SK_U32 SkXmacMcHash(
-unsigned char *pMc)	/* Multicast address */
-{
-	SK_U32 Idx;
-	SK_U32 Bit;
-	SK_U32 Data;
-	SK_U32 Crc;
-
-	Crc = 0xFFFFFFFFUL;
-	for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) {
-		Data = *pMc++;
-		for (Bit = 0; Bit < 8; Bit++, Data >>= 1) {
-			Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0);
-		}
-	}
-
-	return (Crc & ((1 << HASH_BITS) - 1));
-
-}	/* SkXmacMcHash */
-
-
-/******************************************************************************
- *
- *	SkGmacMcHash - hash multicast address
- *
- * Description:
- *	This routine computes the hash value for a multicast address.
- *	A CRC16 algorithm is used.
- *
- * Notes:
- *
- *
- * Context:
- *	runtime, pageable
- *
- * Returns:
- *	Hash value of multicast address.
- */
-static SK_U32 SkGmacMcHash(
-unsigned char *pMc)	/* Multicast address */
-{
-	SK_U32 Data;
-	SK_U32 TmpData;
-	SK_U32 Crc;
-	int Byte;
-	int Bit;
-
-	Crc = 0xFFFFFFFFUL;
-	for (Byte = 0; Byte < 6; Byte++) {
-		/* Get next byte. */
-		Data = (SK_U32) pMc[Byte];
-		
-		/* Change bit order in byte. */
-		TmpData = Data;
-		for (Bit = 0; Bit < 8; Bit++) {
-			if (TmpData & 1L) {
-				Data |=  1L << (7 - Bit);
-			}
-			else {
-				Data &= ~(1L << (7 - Bit));
-			}
-			TmpData >>= 1;
-		}
-		
-		Crc ^= (Data << 24);
-		for (Bit = 0; Bit < 8; Bit++) {
-			if (Crc & 0x80000000) {
-				Crc = (Crc << 1) ^ GMAC_POLY;
-			}
-			else {
-				Crc <<= 1;
-			}
-		}
-	}
-	
-	return (Crc & ((1 << HASH_BITS) - 1));
-
-}	/* SkGmacMcHash */
-
-#endif	/* !SK_ADDR_CHEAT */
-
-/******************************************************************************
- *
- *	SkAddrMcAdd - add a multicast address to a port
- *
- * Description:
- *	This routine enables reception for a given address on the given port.
- *
- *	It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the
- *	adapter in use. The real work is done there.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_DATA
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_MC_ILLEGAL_ADDRESS
- *	SK_MC_ILLEGAL_PORT
- *	SK_MC_RLMT_OVERFLOW
- */
-int	SkAddrMcAdd(
-SK_AC		*pAC,		/* adapter context */
-SK_IOC		IoC,		/* I/O context */
-SK_U32		PortNumber,	/* Port Number */
-SK_MAC_ADDR	*pMc,		/* multicast address to be added */
-int			Flags)		/* permanent/non-permanent */
-{
-	int ReturnCode;
-	
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-	
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
-	}
-	else {
-		ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags);
-	}
-
-	return (ReturnCode);
-
-}	/* SkAddrMcAdd */
-
-
-/******************************************************************************
- *
- *	SkAddrXmacMcAdd - add a multicast address to a port
- *
- * Description:
- *	This routine enables reception for a given address on the given port.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- *	The multicast bit is only checked if there are no free exact match
- *	entries.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_DATA
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_MC_ILLEGAL_ADDRESS
- *	SK_MC_RLMT_OVERFLOW
- */
-static int	SkAddrXmacMcAdd(
-SK_AC		*pAC,		/* adapter context */
-SK_IOC		IoC,		/* I/O context */
-SK_U32		PortNumber,	/* Port Number */
-SK_MAC_ADDR	*pMc,		/* multicast address to be added */
-int		Flags)		/* permanent/non-permanent */
-{
-	int	i;
-	SK_U8	Inexact;
-#ifndef SK_ADDR_CHEAT
-	SK_U32 HashBit;
-#endif	/* !defined(SK_ADDR_CHEAT) */
-
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-#ifdef xDEBUG
-		if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt <
-			SK_ADDR_FIRST_MATCH_RLMT) {
-			Next0[PortNumber] |= 1;
-			return (SK_MC_RLMT_OVERFLOW);
-		}
-#endif	/* DEBUG */
-		
-		if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt >
-			SK_ADDR_LAST_MATCH_RLMT) {
-			return (SK_MC_RLMT_OVERFLOW);
-		}
-
-		/* Set a RLMT multicast address. */
-
-		pAC->Addr.Port[PortNumber].Exact[
-			pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc;
-
-		return (SK_MC_FILTERING_EXACT);
-	}
-
-#ifdef xDEBUG
-	if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <
-		SK_ADDR_FIRST_MATCH_DRV) {
-			Next0[PortNumber] |= 2;
-		return (SK_MC_RLMT_OVERFLOW);
-	}
-#endif	/* DEBUG */
-	
-	if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
-
-		/* Set exact match entry. */
-		pAC->Addr.Port[PortNumber].Exact[
-			pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc;
-
-		/* Clear InexactFilter */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0;
-		}
-	}
-	else {
-		if (!(pMc->a[0] & SK_MC_BIT)) {
-			/* Hashing only possible with multicast addresses */
-			return (SK_MC_ILLEGAL_ADDRESS);
-		}
-#ifndef SK_ADDR_CHEAT
-		/* Compute hash value of address. */
-		HashBit = 63 - SkXmacMcHash(&pMc->a[0]);
-
-		/* Add bit to InexactFilter. */
-		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |=
-			1 << (HashBit % 8);
-#else	/* SK_ADDR_CHEAT */
-		/* Set all bits in InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
-		}
-#endif	/* SK_ADDR_CHEAT */
-	}
-
-	for (Inexact = 0, i = 0; i < 8; i++) {
-		Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
-	}
-
-	if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) {
-		return (SK_MC_FILTERING_EXACT);
-	}
-	else {
-		return (SK_MC_FILTERING_INEXACT);
-	}
-
-}	/* SkAddrXmacMcAdd */
-
-
-/******************************************************************************
- *
- *	SkAddrGmacMcAdd - add a multicast address to a port
- *
- * Description:
- *	This routine enables reception for a given address on the given port.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_DATA
- *
- * Returns:
- *	SK_MC_FILTERING_INEXACT
- *	SK_MC_ILLEGAL_ADDRESS
- */
-static int	SkAddrGmacMcAdd(
-SK_AC		*pAC,		/* adapter context */
-SK_IOC		IoC,		/* I/O context */
-SK_U32		PortNumber,	/* Port Number */
-SK_MAC_ADDR	*pMc,		/* multicast address to be added */
-int		Flags)		/* permanent/non-permanent */
-{
-	int	i;
-#ifndef SK_ADDR_CHEAT
-	SK_U32 HashBit;
-#endif	/* !defined(SK_ADDR_CHEAT) */
-		
-	if (!(pMc->a[0] & SK_MC_BIT)) {
-		/* Hashing only possible with multicast addresses */
-		return (SK_MC_ILLEGAL_ADDRESS);
-	}
-	
-#ifndef SK_ADDR_CHEAT
-	
-	/* Compute hash value of address. */
-	HashBit = SkGmacMcHash(&pMc->a[0]);
-	
-	if (Flags & SK_ADDR_PERMANENT) {	/* permanent => RLMT */
-		
-		/* Add bit to InexactRlmtFilter. */
-		pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |=
-			1 << (HashBit % 8);
-		
-		/* Copy bit to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i];
-		}
-#ifdef DEBUG
-		SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7]))
-#endif	/* DEBUG */
-	}
-	else {	/* not permanent => DRV */
-		
-		/* Add bit to InexactDrvFilter. */
-		pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |=
-			1 << (HashBit % 8);
-		
-		/* Copy bit to InexactFilter. */
-		for (i = 0; i < 8; i++) {
-			pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |=
-				pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i];
-		}
-#ifdef DEBUG
-		SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n",
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6],
-			pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7]))
-#endif	/* DEBUG */
-	}
-	
-#else	/* SK_ADDR_CHEAT */
-	
-	/* Set all bits in InexactFilter. */
-	for (i = 0; i < 8; i++) {
-		pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF;
-	}
-#endif	/* SK_ADDR_CHEAT */
-		
-	return (SK_MC_FILTERING_INEXACT);
-	
-}	/* SkAddrGmacMcAdd */
-
-#endif /* !SK_SLIM */
-
-/******************************************************************************
- *
- *	SkAddrMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- *	This routine enables reception of the addresses contained in a local
- *	table for a given port.
- *	It also programs the port's current physical MAC address.
- *
- *	It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according
- *	to the adapter in use. The real work is done there.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrMcUpdate(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber)	/* Port Number */
-{
-	int ReturnCode = 0;
-#if (!defined(SK_SLIM) || defined(DEBUG))
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-#endif /* !SK_SLIM || DEBUG */
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber);
-	}
-#endif /* GENESIS */
-#ifdef YUKON
-	if (!pAC->GIni.GIGenesis) {
-		ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber);
-	}
-#endif /* YUKON */
-	return (ReturnCode);
-
-}	/* SkAddrMcUpdate */
-
-
-#ifdef GENESIS
-
-/******************************************************************************
- *
- *	SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- *	This routine enables reception of the addresses contained in a local
- *	table for a given port.
- *	It also programs the port's current physical MAC address.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrXmacMcUpdate(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber)	/* Port Number */
-{
-	SK_U32		i;
-	SK_U8		Inexact;
-	SK_U16		*OutAddr;
-	SK_ADDR_PORT	*pAPort;
-
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrXmacMcUpdate on Port %u.\n", PortNumber))
-	
-	pAPort = &pAC->Addr.Port[PortNumber];
-
-#ifdef DEBUG
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
-#endif /* DEBUG */
-
-	/* Start with 0 to also program the logical MAC address. */
-	for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
-		/* Set exact match address i on XMAC */
-		OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
-		XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
-	}
-
-	/* Clear other permanent exact match addresses on XMAC */
-	if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) {
-		
-		SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt,
-			SK_ADDR_LAST_MATCH_RLMT);
-	}
-
-	for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) {
-		OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0];
-		XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr);
-	}
-
-	/* Clear other non-permanent exact match addresses on XMAC */
-	if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) {
-		
-		SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv,
-			SK_ADDR_LAST_MATCH_DRV);
-	}
-
-	for (Inexact = 0, i = 0; i < 8; i++) {
-		Inexact |= pAPort->InexactFilter.Bytes[i];
-	}
-
-	if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {
-		
-		/* Set all bits in 64-bit hash register. */
-		XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if (Inexact != 0) {
-		
-		/* Set 64-bit hash register to InexactFilter. */
-		XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else {
-		/* Disable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
-	}
-
-	if (pAPort->PromMode != SK_PROM_MODE_NONE) {
-		(void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
-	}
-
-	/* Set port's current physical MAC address. */
-	OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-	
-	XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
-
-#ifdef xDEBUG
-	for (i = 0; i < pAPort->NextExactMatchRlmt; i++) {
-		SK_U8		InAddr8[6];
-		SK_U16		*InAddr;
-
-		/* Get exact match address i from port PortNumber. */
-		InAddr = (SK_U16 *) &InAddr8[0];
-		
-		XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr);
-		
-		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-			("SkAddrXmacMcUpdate: MC address %d on Port %u: ",
-			 "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n",
-				i,
-				PortNumber,
-				InAddr8[0],
-				InAddr8[1],
-				InAddr8[2],
-				InAddr8[3],
-				InAddr8[4],
-				InAddr8[5],
-				pAPort->Exact[i].a[0],
-				pAPort->Exact[i].a[1],
-				pAPort->Exact[i].a[2],
-				pAPort->Exact[i].a[3],
-				pAPort->Exact[i].a[4],
-				pAPort->Exact[i].a[5]))
-	}
-#endif /* DEBUG */
-
-	/* Determine return value. */
-	if (Inexact == 0 && pAPort->PromMode == 0) {
-		return (SK_MC_FILTERING_EXACT);
-	}
-	else {
-		return (SK_MC_FILTERING_INEXACT);
-	}
-	
-}	/* SkAddrXmacMcUpdate */
-
-#endif  /* GENESIS */
-
-#ifdef YUKON
-
-/******************************************************************************
- *
- *	SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address
- *
- * Description:
- *	This routine enables reception of the addresses contained in a local
- *	table for a given port.
- *	It also programs the port's current physical MAC address.
- *
- * Notes:
- *	The return code is only valid for SK_PROM_MODE_NONE.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_MC_FILTERING_EXACT
- *	SK_MC_FILTERING_INEXACT
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrGmacMcUpdate(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* I/O context */
-SK_U32	PortNumber)	/* Port Number */
-{
-#ifndef SK_SLIM
-	SK_U32		i;
-	SK_U8		Inexact;
-#endif	/* not SK_SLIM */
-	SK_U16		*OutAddr;
-	SK_ADDR_PORT	*pAPort;
-
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrGmacMcUpdate on Port %u.\n", PortNumber))
-	
-	pAPort = &pAC->Addr.Port[PortNumber];
-
-#ifdef DEBUG
-	SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber]))
-#endif /* DEBUG */
-	
-#ifndef SK_SLIM
-	for (Inexact = 0, i = 0; i < 8; i++) {
-		Inexact |= pAPort->InexactFilter.Bytes[i];
-	}
-	
-	/* Set 64-bit hash register to InexactFilter. */
-	GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
-		&pAPort->InexactFilter.Bytes[0]);
-	
-	if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) {				
-		
-		/* Set all bits in 64-bit hash register. */
-		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else {	
-		/* Enable Hashing. */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	
-	if (pAPort->PromMode != SK_PROM_MODE_NONE) {
-		(void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
-	}
-#else /* SK_SLIM */
-
-	/* Set all bits in 64-bit hash register. */
-	GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-
-	/* Enable Hashing */
-	SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	
-	(void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode);
-	
-#endif /* SK_SLIM */
-	
-	/* Set port's current physical MAC address. */
-	OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0];
-	GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
-	
-	/* Set port's current logical MAC address. */
-	OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0];
-	GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr);
-	
-#ifdef DEBUG
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-			pAPort->Exact[0].a[0],
-			pAPort->Exact[0].a[1],
-			pAPort->Exact[0].a[2],
-			pAPort->Exact[0].a[3],
-			pAPort->Exact[0].a[4],
-			pAPort->Exact[0].a[5]))
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-		("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-			pAPort->CurrentMacAddress.a[0],
-			pAPort->CurrentMacAddress.a[1],
-			pAPort->CurrentMacAddress.a[2],
-			pAPort->CurrentMacAddress.a[3],
-			pAPort->CurrentMacAddress.a[4],
-			pAPort->CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-	
-#ifndef SK_SLIM
-	/* Determine return value. */
-	if (Inexact == 0 && pAPort->PromMode == 0) {
-		return (SK_MC_FILTERING_EXACT);
-	}
-	else {
-		return (SK_MC_FILTERING_INEXACT);
-	}
-#else /* SK_SLIM */
-	return (SK_MC_FILTERING_INEXACT);
-#endif /* SK_SLIM */
-	
-}	/* SkAddrGmacMcUpdate */
-
-#endif /* YUKON */
-
-#ifndef SK_NO_MAO
-
-/******************************************************************************
- *
- *	SkAddrOverride - override a port's MAC address
- *
- * Description:
- *	This routine overrides the MAC address of one port.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS if successful.
- *	SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address.
- *	SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address.
- *	SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before.
- */
-int	SkAddrOverride(
-SK_AC		*pAC,				/* adapter context */
-SK_IOC		IoC,				/* I/O context */
-SK_U32		PortNumber,			/* Port Number */
-SK_MAC_ADDR	SK_FAR *pNewAddr,	/* new MAC address */
-int			Flags)				/* logical/physical MAC address */
-{
-#ifndef SK_NO_RLMT
-	SK_EVPARA	Para;
-#endif /* !SK_NO_RLMT */
-	SK_U32		NetNumber;
-	SK_U32		i;
-	SK_U16		SK_FAR *OutAddr;
-
-#ifndef SK_NO_RLMT
-	NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber;
-#else
-	NetNumber = 0;
-#endif /* SK_NO_RLMT */
-#if (!defined(SK_SLIM) || defined(DEBUG))
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-#endif /* !SK_SLIM || DEBUG */
-	if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) {
-		return (SK_ADDR_MULTICAST_ADDRESS);
-	}
-
-	if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) {
-		return (SK_ADDR_TOO_EARLY);
-	}
-
-	if (Flags & SK_ADDR_SET_LOGICAL) {	/* Activate logical MAC address. */
-		/* Parameter *pNewAddr is ignored. */
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-		}
-#ifndef SK_NO_RLMT
-		/* Set PortNumber to number of net's active port. */
-		PortNumber = pAC->Rlmt.Net[NetNumber].
-			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
-		pAC->Addr.Port[PortNumber].Exact[0] =
-			pAC->Addr.Net[NetNumber].CurrentMacAddress;
-
-		/* Write address to first exact match entry of active port. */
-		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
-	}
-	else if (Flags & SK_ADDR_CLEAR_LOGICAL) {
-		/* Deactivate logical MAC address. */
-		/* Parameter *pNewAddr is ignored. */
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-		}
-#ifndef SK_NO_RLMT
-		/* Set PortNumber to number of net's active port. */
-		PortNumber = pAC->Rlmt.Net[NetNumber].
-			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
-		for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) {
-			pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0;
-		}
-
-		/* Write address to first exact match entry of active port. */
-		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
-	}
-	else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) {	/* Physical MAC address. */
-		if (SK_ADDR_EQUAL(pNewAddr->a,
-			pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
-			return (SK_ADDR_DUPLICATE_ADDRESS);
-		}
-
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-
-			if (SK_ADDR_EQUAL(pNewAddr->a,
-				pAC->Addr.Port[i].CurrentMacAddress.a)) {
-				if (i == PortNumber) {
-					return (SK_ADDR_SUCCESS);
-				}
-				else {
-					return (SK_ADDR_DUPLICATE_ADDRESS);
-				}
-			}
-		}
-
-		pAC->Addr.Port[PortNumber].PreviousMacAddress =
-			pAC->Addr.Port[PortNumber].CurrentMacAddress;
-		pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
-
-		/* Change port's physical MAC address. */
-		OutAddr = (SK_U16 SK_FAR *) pNewAddr;
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr);
-		}
-#endif /* GENESIS */
-#ifdef YUKON
-		if (!pAC->GIni.GIGenesis) {
-			GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr);
-		}
-#endif /* YUKON */
-
-#ifndef SK_NO_RLMT
-		/* Report address change to RLMT. */
-		Para.Para32[0] = PortNumber;
-		Para.Para32[0] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
-#endif /* !SK_NO_RLMT */
-	}
-	else {	/* Logical MAC address. */
-		if (SK_ADDR_EQUAL(pNewAddr->a,
-			pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) {
-			return (SK_ADDR_SUCCESS);
-		}
-		
-		for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) {
-			if (!pAC->Addr.Port[i].CurrentMacAddressSet) {
-				return (SK_ADDR_TOO_EARLY);
-			}
-
-			if (SK_ADDR_EQUAL(pNewAddr->a,
-				pAC->Addr.Port[i].CurrentMacAddress.a)) {
-				return (SK_ADDR_DUPLICATE_ADDRESS);
-			}
-		}
-		
-		/*
-		 * In case that the physical and the logical MAC addresses are equal
-		 * we must also change the physical MAC address here.
-		 * In this case we have an adapter which initially was programmed with
-		 * two identical MAC addresses.
-		 */
-		if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a,
-				pAC->Addr.Port[PortNumber].Exact[0].a)) {
-			
-			pAC->Addr.Port[PortNumber].PreviousMacAddress =
-				pAC->Addr.Port[PortNumber].CurrentMacAddress;
-			pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr;
-			
-#ifndef SK_NO_RLMT
-			/* Report address change to RLMT. */
-			Para.Para32[0] = PortNumber;
-			Para.Para32[0] = -1;
-			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para);
-#endif /* !SK_NO_RLMT */
-		}
-		
-#ifndef SK_NO_RLMT
-		/* Set PortNumber to number of net's active port. */
-		PortNumber = pAC->Rlmt.Net[NetNumber].
-			Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber;
-#endif /* !SK_NO_RLMT */
-		pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr;
-		pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr;
-#ifdef DEBUG
-		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-			("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n",
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4],
-				pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5]))
-		
-		SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL,
-			("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n",
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4],
-				pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5]))
-#endif /* DEBUG */
-
-        /* Write address to first exact match entry of active port. */
-		(void) SkAddrMcUpdate(pAC, IoC, PortNumber);
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrOverride */
-
-
-#endif /* SK_NO_MAO */
-
-/******************************************************************************
- *
- *	SkAddrPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- *	This routine manages promiscuous mode:
- *	- none
- *	- all LLC frames
- *	- all MC frames
- *
- *	It calls either SkAddrXmacPromiscuousChange or
- *	SkAddrGmacPromiscuousChange, according to the adapter in use.
- *	The real work is done there.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrPromiscuousChange(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	PortNumber,		/* port whose promiscuous mode changes */
-int		NewPromMode)	/* new promiscuous mode */
-{
-	int ReturnCode = 0;
-#if (!defined(SK_SLIM) || defined(DEBUG))
-	if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-#endif /* !SK_SLIM || DEBUG */
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		ReturnCode =
-			SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
-	}
-#endif /* GENESIS */
-#ifdef YUKON
-	if (!pAC->GIni.GIGenesis) {
-		ReturnCode =
-			SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode);
-	}
-#endif /* YUKON */
-
-	return (ReturnCode);
-
-}	/* SkAddrPromiscuousChange */
-
-#ifdef GENESIS
-
-/******************************************************************************
- *
- *	SkAddrXmacPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- *	This routine manages promiscuous mode:
- *	- none
- *	- all LLC frames
- *	- all MC frames
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrXmacPromiscuousChange(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	PortNumber,		/* port whose promiscuous mode changes */
-int		NewPromMode)	/* new promiscuous mode */
-{
-	int			i;
-	SK_BOOL		InexactModeBit;
-	SK_U8		Inexact;
-	SK_U8		HwInexact;
-	SK_FILTER64	HwInexactFilter;
-	SK_U16		LoMode;		/* Lower 16 bits of XMAC Mode Register. */
-	int			CurPromMode = SK_PROM_MODE_NONE;
-
-	/* Read CurPromMode from Hardware. */
-	XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
-
-	if ((LoMode & XM_MD_ENA_PROM) != 0) {
-		/* Promiscuous mode! */
-		CurPromMode |= SK_PROM_MODE_LLC;
-	}
-	
-	for (Inexact = 0xFF, i = 0; i < 8; i++) {
-		Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
-	}
-	if (Inexact == 0xFF) {
-		CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
-	}
-	else {
-		/* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */
-		XM_IN16(IoC, PortNumber, XM_MODE, &LoMode);
-		
-		InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0;
-
-		/* Read 64-bit hash register from XMAC */
-		XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]);
-
-		for (HwInexact = 0xFF, i = 0; i < 8; i++) {
-			HwInexact &= HwInexactFilter.Bytes[i];
-		}
-
-		if (InexactModeBit && (HwInexact == 0xFF)) {
-			CurPromMode |= SK_PROM_MODE_ALL_MC;
-		}
-	}
-
-	pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
-
-	if (NewPromMode == CurPromMode) {
-		return (SK_ADDR_SUCCESS);
-	}
-
-	if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(CurPromMode & SK_PROM_MODE_ALL_MC)) {	/* All MC. */
-		
-		/* Set all bits in 64-bit hash register. */
-		XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash);
-
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(NewPromMode & SK_PROM_MODE_ALL_MC)) {	/* Norm MC. */
-		for (Inexact = 0, i = 0; i < 8; i++) {
-			Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i];
-		}
-		if (Inexact == 0) {
-			/* Disable Hashing */
-			SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE);
-		}
-		else {
-			/* Set 64-bit hash register to InexactFilter. */
-			XM_OUTHASH(IoC, PortNumber, XM_HSM,
-				&pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
-
-			/* Enable Hashing */
-			SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-		}
-	}
-
-	if ((NewPromMode & SK_PROM_MODE_LLC) &&
-		!(CurPromMode & SK_PROM_MODE_LLC)) {	/* Prom. LLC */
-		/* Set the MAC in Promiscuous Mode */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if ((CurPromMode & SK_PROM_MODE_LLC) &&
-		!(NewPromMode & SK_PROM_MODE_LLC)) {	/* Norm. LLC. */
-		/* Clear Promiscuous Mode */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
-	}
-	
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrXmacPromiscuousChange */
-
-#endif /* GENESIS */
-
-#ifdef YUKON
-
-/******************************************************************************
- *
- *	SkAddrGmacPromiscuousChange - set promiscuous mode for given port
- *
- * Description:
- *	This routine manages promiscuous mode:
- *	- none
- *	- all LLC frames
- *	- all MC frames
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-static int	SkAddrGmacPromiscuousChange(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	PortNumber,		/* port whose promiscuous mode changes */
-int		NewPromMode)	/* new promiscuous mode */
-{
-	SK_U16		ReceiveControl;	/* GMAC Receive Control Register */
-	int		CurPromMode = SK_PROM_MODE_NONE;
-
-	/* Read CurPromMode from Hardware. */
-	GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl);
-
-	if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) {
-		/* Promiscuous mode! */
-		CurPromMode |= SK_PROM_MODE_LLC;
-	}
-
-	if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) {
-		/* All Multicast mode! */
-		CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC);
-	}
-
-	pAC->Addr.Port[PortNumber].PromMode = NewPromMode;
-
-	if (NewPromMode == CurPromMode) {
-		return (SK_ADDR_SUCCESS);
-	}
-	
-	if ((NewPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(CurPromMode & SK_PROM_MODE_ALL_MC)) {	/* All MC */
-		
-		/* Set all bits in 64-bit hash register. */
-		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash);
-		
-		/* Enable Hashing */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	
-	if ((CurPromMode & SK_PROM_MODE_ALL_MC) &&
-		!(NewPromMode & SK_PROM_MODE_ALL_MC)) {	/* Norm. MC */
-
-		/* Set 64-bit hash register to InexactFilter. */
-		GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1,
-			&pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]);
-
-		/* Enable Hashing. */
-		SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-
-	if ((NewPromMode & SK_PROM_MODE_LLC) &&
-		!(CurPromMode & SK_PROM_MODE_LLC)) {	/* Prom. LLC */
-		
-		/* Set the MAC to Promiscuous Mode. */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE);
-	}
-	else if ((CurPromMode & SK_PROM_MODE_LLC) &&
-		!(NewPromMode & SK_PROM_MODE_LLC)) {	/* Norm. LLC */
-		
-		/* Clear Promiscuous Mode. */
-		SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE);
-	}
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrGmacPromiscuousChange */
-
-#endif /* YUKON */
-
-#ifndef SK_SLIM
-
-/******************************************************************************
- *
- *	SkAddrSwap - swap address info
- *
- * Description:
- *	This routine swaps address info of two ports.
- *
- * Context:
- *	runtime, pageable
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	SK_ADDR_SUCCESS
- *	SK_ADDR_ILLEGAL_PORT
- */
-int	SkAddrSwap(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* I/O context */
-SK_U32	FromPortNumber,		/* Port1 Index */
-SK_U32	ToPortNumber)		/* Port2 Index */
-{
-	int			i;
-	SK_U8		Byte;
-	SK_MAC_ADDR	MacAddr;
-	SK_U32		DWord;
-
-	if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-
-	if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-
-	if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) {
-		return (SK_ADDR_ILLEGAL_PORT);
-	}
-
-	/*
-	 * Swap:
-	 * - Exact Match Entries (GEnesis and Yukon)
-	 *   Yukon uses first entry for the logical MAC
-	 *   address (stored in the second GMAC register).
-	 * - FirstExactMatchRlmt (GEnesis only)
-	 * - NextExactMatchRlmt (GEnesis only)
-	 * - FirstExactMatchDrv (GEnesis only)
-	 * - NextExactMatchDrv (GEnesis only)
-	 * - 64-bit filter (InexactFilter)
-	 * - Promiscuous Mode
-	 * of ports.
-	 */
-
-	for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) {
-		MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i];
-		pAC->Addr.Port[FromPortNumber].Exact[i] =
-			pAC->Addr.Port[ToPortNumber].Exact[i];
-		pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr;
-	}
-
-	for (i = 0; i < 8; i++) {
-		Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i];
-		pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] =
-			pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i];
-		pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte;
-	}
-	
-	i = pAC->Addr.Port[FromPortNumber].PromMode;
-	pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode;
-	pAC->Addr.Port[ToPortNumber].PromMode = i;
-	
-	if (pAC->GIni.GIGenesis) {
-		DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt;
-		pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt =
-			pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt;
-		pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord;
-		
-		DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt;
-		pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt =
-			pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt;
-		pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord;
-		
-		DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv;
-		pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv =
-			pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv;
-		pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord;
-		
-		DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv;
-		pAC->Addr.Port[FromPortNumber].NextExactMatchDrv =
-			pAC->Addr.Port[ToPortNumber].NextExactMatchDrv;
-		pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord;
-	}
-	
-	/* CAUTION: Solution works if only ports of one adapter are in use. */
-	for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].
-		Net->NetNumber].NumPorts; i++) {
-		if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
-			Port[i]->PortNumber == ToPortNumber) {
-			pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber].
-				ActivePort = i;
-			/* 20001207 RA: Was "ToPortNumber;". */
-		}
-	}
-	
-	(void) SkAddrMcUpdate(pAC, IoC, FromPortNumber);
-	(void) SkAddrMcUpdate(pAC, IoC, ToPortNumber);
-
-	return (SK_ADDR_SUCCESS);
-	
-}	/* SkAddrSwap */
-
-#endif /* !SK_SLIM */
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c
deleted file mode 100644
index 37ce03fb8de3..000000000000
--- a/drivers/net/sk98lin/skdim.c
+++ /dev/null
@@ -1,742 +0,0 @@
-/******************************************************************************
- *
- * Name:	skdim.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.5 $
- * Date:	$Date: 2003/11/28 12:55:40 $
- * Purpose:	All functions to maintain interrupt moderation
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage the dynamic interrupt moderation on both   
- * GEnesis and Yukon adapters.
- *
- * Include File Hierarchy:
- *
- *	"skdrv1st.h"
- *	"skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef	lint
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skdim.c,v 1.5 2003/11/28 12:55:40 rroesler Exp $ (C) SysKonnect.";
-#endif
-
-#define __SKADDR_C
-
-#ifdef __cplusplus
-#error C++ is not yet supported.
-extern "C" {
-#endif
-
-/*******************************************************************************
-**
-** Includes
-**
-*******************************************************************************/
-
-#ifndef __INC_SKDRV1ST_H
-#include "h/skdrv1st.h"
-#endif
-
-#ifndef __INC_SKDRV2ND_H
-#include "h/skdrv2nd.h"
-#endif
-
-#include	<linux/kernel_stat.h>
-
-/*******************************************************************************
-**
-** Defines
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Typedefs
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Local function prototypes 
-**
-*******************************************************************************/
-
-static unsigned int GetCurrentSystemLoad(SK_AC *pAC);
-static SK_U64       GetIsrCalls(SK_AC *pAC);
-static SK_BOOL      IsIntModEnabled(SK_AC *pAC);
-static void         SetCurrIntCtr(SK_AC *pAC);
-static void         EnableIntMod(SK_AC *pAC); 
-static void         DisableIntMod(SK_AC *pAC);
-static void         ResizeDimTimerDuration(SK_AC *pAC);
-static void         DisplaySelectedModerationType(SK_AC *pAC);
-static void         DisplaySelectedModerationMask(SK_AC *pAC);
-static void         DisplayDescrRatio(SK_AC *pAC);
-
-/*******************************************************************************
-**
-** Global variables
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Local variables
-**
-*******************************************************************************/
-
-/*******************************************************************************
-**
-** Global functions 
-**
-*******************************************************************************/
-
-/*******************************************************************************
-** Function     : SkDimModerate
-** Description  : Called in every ISR to check if moderation is to be applied
-**                or not for the current number of interrupts
-** Programmer   : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns      : void (!)
-** Notes        : -
-*******************************************************************************/
-
-void 
-SkDimModerate(SK_AC *pAC) {
-    unsigned int CurrSysLoad    = 0;  /* expressed in percent */
-    unsigned int LoadIncrease   = 0;  /* expressed in percent */
-    SK_U64       ThresholdInts  = 0;
-    SK_U64       IsrCallsPerSec = 0;
-
-#define M_DIMINFO pAC->DynIrqModInfo
-
-    if (!IsIntModEnabled(pAC)) {
-        if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
-            CurrSysLoad = GetCurrentSystemLoad(pAC);
-            if (CurrSysLoad > 75) {
-                    /* 
-                    ** More than 75% total system load! Enable the moderation 
-                    ** to shield the system against too many interrupts.
-                    */
-                    EnableIntMod(pAC);
-            } else if (CurrSysLoad > M_DIMINFO.PrevSysLoad) {
-                LoadIncrease = (CurrSysLoad - M_DIMINFO.PrevSysLoad);
-                if (LoadIncrease > ((M_DIMINFO.PrevSysLoad *
-                                         C_INT_MOD_ENABLE_PERCENTAGE) / 100)) {
-                    if (CurrSysLoad > 10) {
-                        /* 
-                        ** More than 50% increase with respect to the 
-                        ** previous load of the system. Most likely this 
-                        ** is due to our ISR-proc...
-                        */
-                        EnableIntMod(pAC);
-                    }
-                }
-            } else {
-                /*
-                ** Neither too much system load at all nor too much increase
-                ** with respect to the previous system load. Hence, we can leave
-                ** the ISR-handling like it is without enabling moderation.
-                */
-            }
-            M_DIMINFO.PrevSysLoad = CurrSysLoad;
-        }   
-    } else {
-        if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
-            ThresholdInts  = ((M_DIMINFO.MaxModIntsPerSec *
-                                   C_INT_MOD_DISABLE_PERCENTAGE) / 100);
-            IsrCallsPerSec = GetIsrCalls(pAC);
-            if (IsrCallsPerSec <= ThresholdInts) {
-                /* 
-                ** The number of interrupts within the last second is 
-                ** lower than the disable_percentage of the desried 
-                ** maxrate. Therefore we can disable the moderation.
-                */
-                DisableIntMod(pAC);
-                M_DIMINFO.MaxModIntsPerSec = 
-                   (M_DIMINFO.MaxModIntsPerSecUpperLimit +
-                    M_DIMINFO.MaxModIntsPerSecLowerLimit) / 2;
-            } else {
-                /*
-                ** The number of interrupts per sec is the same as expected.
-                ** Evalulate the descriptor-ratio. If it has changed, a resize 
-                ** in the moderation timer might be useful
-                */
-                if (M_DIMINFO.AutoSizing) {
-                    ResizeDimTimerDuration(pAC);
-                }
-            }
-        }
-    }
-
-    /*
-    ** Some information to the log...
-    */
-    if (M_DIMINFO.DisplayStats) {
-        DisplaySelectedModerationType(pAC);
-        DisplaySelectedModerationMask(pAC);
-        DisplayDescrRatio(pAC);
-    }
-
-    M_DIMINFO.NbrProcessedDescr = 0; 
-    SetCurrIntCtr(pAC);
-}
-
-/*******************************************************************************
-** Function     : SkDimStartModerationTimer
-** Description  : Starts the audit-timer for the dynamic interrupt moderation
-** Programmer   : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns      : void (!)
-** Notes        : -
-*******************************************************************************/
-
-void 
-SkDimStartModerationTimer(SK_AC *pAC) {
-    SK_EVPARA    EventParam;   /* Event struct for timer event */
- 
-    SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam));
-    EventParam.Para32[0] = SK_DRV_MODERATION_TIMER;
-    SkTimerStart(pAC, pAC->IoBase, &pAC->DynIrqModInfo.ModTimer,
-                 SK_DRV_MODERATION_TIMER_LENGTH,
-                 SKGE_DRV, SK_DRV_TIMER, EventParam);
-}
-
-/*******************************************************************************
-** Function     : SkDimEnableModerationIfNeeded
-** Description  : Either enables or disables moderation
-** Programmer   : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns      : void (!)
-** Notes        : This function is called when a particular adapter is opened
-**                There is no Disable function, because when all interrupts 
-**                might be disable, the moderation timer has no meaning at all
-******************************************************************************/
-
-void
-SkDimEnableModerationIfNeeded(SK_AC *pAC) {
-
-    if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_STATIC) {
-        EnableIntMod(pAC);   /* notification print in this function */
-    } else if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
-        SkDimStartModerationTimer(pAC);
-        if (M_DIMINFO.DisplayStats) {
-            printk("Dynamic moderation has been enabled\n");
-        }
-    } else {
-        if (M_DIMINFO.DisplayStats) {
-            printk("No moderation has been enabled\n");
-        }
-    }
-}
-
-/*******************************************************************************
-** Function     : SkDimDisplayModerationSettings
-** Description  : Displays the current settings regarding interrupt moderation
-** Programmer   : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns      : void (!)
-** Notes        : -
-*******************************************************************************/
-
-void 
-SkDimDisplayModerationSettings(SK_AC *pAC) {
-    DisplaySelectedModerationType(pAC);
-    DisplaySelectedModerationMask(pAC);
-}
-
-/*******************************************************************************
-**
-** Local functions 
-**
-*******************************************************************************/
-
-/*******************************************************************************
-** Function     : GetCurrentSystemLoad
-** Description  : Retrieves the current system load of the system. This load
-**                is evaluated for all processors within the system.
-** Programmer   : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns      : unsigned int: load expressed in percentage
-** Notes        : The possible range being returned is from 0 up to 100.
-**                Whereas 0 means 'no load at all' and 100 'system fully loaded'
-**                It is impossible to determine what actually causes the system
-**                to be in 100%, but maybe that is due to too much interrupts.
-*******************************************************************************/
-
-static unsigned int
-GetCurrentSystemLoad(SK_AC *pAC) {
-	unsigned long jif         = jiffies;
-	unsigned int  UserTime    = 0;
-	unsigned int  SystemTime  = 0;
-	unsigned int  NiceTime    = 0;
-	unsigned int  IdleTime    = 0;
-	unsigned int  TotalTime   = 0;
-	unsigned int  UsedTime    = 0;
-	unsigned int  SystemLoad  = 0;
-
-	/* unsigned int  NbrCpu      = 0; */
-
-	/*
-	** The following lines have been commented out, because
-	** from kernel 2.5.44 onwards, the kernel-owned structure
-	**
-	**      struct kernel_stat kstat
-	**
-	** is not marked as an exported symbol in the file
-	**
-	**      kernel/ksyms.c 
-	**
-	** As a consequence, using this driver as KLM is not possible
-	** and any access of the structure kernel_stat via the 
-	** dedicated macros kstat_cpu(i).cpustat.xxx is to be avoided.
-	**
-	** The kstat-information might be added again in future 
-	** versions of the 2.5.xx kernel, but for the time being, 
-	** number of interrupts will serve as indication how much 
-	** load we currently have... 
-	**
-	** for (NbrCpu = 0; NbrCpu < num_online_cpus(); NbrCpu++) {
-	**	UserTime   = UserTime   + kstat_cpu(NbrCpu).cpustat.user;
-	**	NiceTime   = NiceTime   + kstat_cpu(NbrCpu).cpustat.nice;
-	**	SystemTime = SystemTime + kstat_cpu(NbrCpu).cpustat.system;
-	** }
-	*/
-	SK_U64 ThresholdInts  = 0;
-	SK_U64 IsrCallsPerSec = 0;
-
-	ThresholdInts  = ((M_DIMINFO.MaxModIntsPerSec *
-			   C_INT_MOD_ENABLE_PERCENTAGE) + 100);
-	IsrCallsPerSec = GetIsrCalls(pAC);
-	if (IsrCallsPerSec >= ThresholdInts) {
-	    /*
-	    ** We do not know how much the real CPU-load is!
-	    ** Return 80% as a default in order to activate DIM
-	    */
-	    SystemLoad = 80;
-	    return (SystemLoad);  
-	} 
-
-	UsedTime  = UserTime + NiceTime + SystemTime;
-
-	IdleTime  = jif * num_online_cpus() - UsedTime;
-	TotalTime = UsedTime + IdleTime;
-
-	SystemLoad = ( 100 * (UsedTime  - M_DIMINFO.PrevUsedTime) ) /
-						(TotalTime - M_DIMINFO.PrevTotalTime);
-
-	if (M_DIMINFO.DisplayStats) {
-		printk("Current system load is: %u\n", SystemLoad);
-	}
-
-	M_DIMINFO.PrevTotalTime = TotalTime;
-	M_DIMINFO.PrevUsedTime  = UsedTime;
-
-	return (SystemLoad);
-}
-
-/*******************************************************************************
-** Function     : GetIsrCalls
-** Description  : Depending on the selected moderation mask, this function will
-**                return the number of interrupts handled in the previous time-
-**                frame. This evaluated number is based on the current number 
-**                of interrupts stored in PNMI-context and the previous stored 
-**                interrupts.
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : int:   the number of interrupts being executed in the last
-**                       timeframe
-** Notes        : It makes only sense to call this function, when dynamic 
-**                interrupt moderation is applied
-*******************************************************************************/
-
-static SK_U64
-GetIsrCalls(SK_AC *pAC) {
-    SK_U64   RxPort0IntDiff = 0;
-    SK_U64   RxPort1IntDiff = 0;
-    SK_U64   TxPort0IntDiff = 0;
-    SK_U64   TxPort1IntDiff = 0;
-
-    if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_TX_ONLY) {
-        if (pAC->GIni.GIMacsFound == 2) {
-            TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - 
-                             pAC->DynIrqModInfo.PrevPort1TxIntrCts;
-        }
-        TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - 
-                         pAC->DynIrqModInfo.PrevPort0TxIntrCts;
-    } else if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_RX_ONLY) {
-        if (pAC->GIni.GIMacsFound == 2) {
-            RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - 
-                             pAC->DynIrqModInfo.PrevPort1RxIntrCts;
-        }
-        RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - 
-                         pAC->DynIrqModInfo.PrevPort0RxIntrCts;
-    } else {
-        if (pAC->GIni.GIMacsFound == 2) {
-            RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - 
-                             pAC->DynIrqModInfo.PrevPort1RxIntrCts;
-            TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - 
-                             pAC->DynIrqModInfo.PrevPort1TxIntrCts;
-        } 
-        RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - 
-                         pAC->DynIrqModInfo.PrevPort0RxIntrCts;
-        TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - 
-                         pAC->DynIrqModInfo.PrevPort0TxIntrCts;
-    }
-
-    return (RxPort0IntDiff + RxPort1IntDiff + TxPort0IntDiff + TxPort1IntDiff);
-}
-
-/*******************************************************************************
-** Function     : GetRxCalls
-** Description  : This function will return the number of times a receive inter-
-**                rupt was processed. This is needed to evaluate any resizing 
-**                factor.
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : SK_U64: the number of RX-ints being processed
-** Notes        : It makes only sense to call this function, when dynamic 
-**                interrupt moderation is applied
-*******************************************************************************/
-
-static SK_U64
-GetRxCalls(SK_AC *pAC) {
-    SK_U64   RxPort0IntDiff = 0;
-    SK_U64   RxPort1IntDiff = 0;
-
-    if (pAC->GIni.GIMacsFound == 2) {
-        RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - 
-                         pAC->DynIrqModInfo.PrevPort1RxIntrCts;
-    }
-    RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - 
-                     pAC->DynIrqModInfo.PrevPort0RxIntrCts;
-
-    return (RxPort0IntDiff + RxPort1IntDiff);
-}
-
-/*******************************************************************************
-** Function     : SetCurrIntCtr
-** Description  : Will store the current number orf occured interrupts in the 
-**                adapter context. This is needed to evaluated the number of 
-**                interrupts within a current timeframe.
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : void (!)
-** Notes        : -
-*******************************************************************************/
-
-static void
-SetCurrIntCtr(SK_AC *pAC) {
-    if (pAC->GIni.GIMacsFound == 2) {
-        pAC->DynIrqModInfo.PrevPort1RxIntrCts = pAC->Pnmi.Port[1].RxIntrCts;
-        pAC->DynIrqModInfo.PrevPort1TxIntrCts = pAC->Pnmi.Port[1].TxIntrCts;
-    } 
-    pAC->DynIrqModInfo.PrevPort0RxIntrCts = pAC->Pnmi.Port[0].RxIntrCts;
-    pAC->DynIrqModInfo.PrevPort0TxIntrCts = pAC->Pnmi.Port[0].TxIntrCts;
-}
-
-/*******************************************************************************
-** Function     : IsIntModEnabled()
-** Description  : Retrieves the current value of the interrupts moderation
-**                command register. Its content determines whether any 
-**                moderation is running or not.
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : SK_TRUE  : if mod timer running
-**                SK_FALSE : if no moderation is being performed
-** Notes        : -
-*******************************************************************************/
-
-static SK_BOOL
-IsIntModEnabled(SK_AC *pAC) {
-    unsigned long CtrCmd;
-
-    SK_IN32(pAC->IoBase, B2_IRQM_CTRL, &CtrCmd);
-    if ((CtrCmd & TIM_START) == TIM_START) {
-       return SK_TRUE;
-    } else {
-       return SK_FALSE;
-    }
-}
-
-/*******************************************************************************
-** Function     : EnableIntMod()
-** Description  : Enables the interrupt moderation using the values stored in
-**                in the pAC->DynIntMod data structure
-** Programmer   : Ralph Roesler
-** Last Modified: 22-mar-03
-** Returns      : -
-** Notes        : -
-*******************************************************************************/
-
-static void
-EnableIntMod(SK_AC *pAC) {
-    unsigned long ModBase;
-
-    if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
-       ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec;
-    } else {
-       ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec;
-    }
-
-    SK_OUT32(pAC->IoBase, B2_IRQM_INI,  ModBase);
-    SK_OUT32(pAC->IoBase, B2_IRQM_MSK,  pAC->DynIrqModInfo.MaskIrqModeration);
-    SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START);
-    if (M_DIMINFO.DisplayStats) {
-        printk("Enabled interrupt moderation (%i ints/sec)\n",
-               M_DIMINFO.MaxModIntsPerSec);
-    }
-}
-
-/*******************************************************************************
-** Function     : DisableIntMod()
-** Description  : Disables the interrupt moderation independent of what inter-
-**                rupts are running or not
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : -
-** Notes        : -
-*******************************************************************************/
-
-static void 
-DisableIntMod(SK_AC *pAC) {
-
-    SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_STOP);
-    if (M_DIMINFO.DisplayStats) {
-        printk("Disabled interrupt moderation\n");
-    }
-} 
-
-/*******************************************************************************
-** Function     : ResizeDimTimerDuration();
-** Description  : Checks the current used descriptor ratio and resizes the 
-**                duration timer (longer/smaller) if possible. 
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : -
-** Notes        : There are both maximum and minimum timer duration value. 
-**                This function assumes that interrupt moderation is already
-**                enabled!
-*******************************************************************************/
-
-static void 
-ResizeDimTimerDuration(SK_AC *pAC) {
-    SK_BOOL IncreaseTimerDuration;
-    int     TotalMaxNbrDescr;
-    int     UsedDescrRatio;
-    int     RatioDiffAbs;
-    int     RatioDiffRel;
-    int     NewMaxModIntsPerSec;
-    int     ModAdjValue;
-    long    ModBase;
-
-    /*
-    ** Check first if we are allowed to perform any modification
-    */
-    if (IsIntModEnabled(pAC)) { 
-        if (M_DIMINFO.IntModTypeSelect != C_INT_MOD_DYNAMIC) {
-            return; 
-        } else {
-            if (M_DIMINFO.ModJustEnabled) {
-                M_DIMINFO.ModJustEnabled = SK_FALSE;
-                return;
-            }
-        }
-    }
-
-    /*
-    ** If we got until here, we have to evaluate the amount of the
-    ** descriptor ratio change...
-    */
-    TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC);
-    UsedDescrRatio   = (M_DIMINFO.NbrProcessedDescr * 100) / TotalMaxNbrDescr;
-
-    if (UsedDescrRatio > M_DIMINFO.PrevUsedDescrRatio) {
-        RatioDiffAbs = (UsedDescrRatio - M_DIMINFO.PrevUsedDescrRatio);
-        RatioDiffRel = (RatioDiffAbs * 100) / UsedDescrRatio;
-        M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
-        IncreaseTimerDuration = SK_FALSE;  /* in other words: DECREASE */
-    } else if (UsedDescrRatio < M_DIMINFO.PrevUsedDescrRatio) {
-        RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio);
-        RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio;
-        M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
-        IncreaseTimerDuration = SK_TRUE;   /* in other words: INCREASE */
-    } else {
-        RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio);
-        RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio;
-        M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio;
-        IncreaseTimerDuration = SK_TRUE;   /* in other words: INCREASE */
-    }
-
-    /*
-    ** Now we can determine the change in percent
-    */
-    if ((RatioDiffRel >= 0) && (RatioDiffRel <= 5) ) {
-       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
-    } else if ((RatioDiffRel > 5) && (RatioDiffRel <= 10) ) {
-       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
-    } else if ((RatioDiffRel > 10) && (RatioDiffRel <= 15) ) {
-       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
-    } else {
-       ModAdjValue = 1;  /*  1% change - maybe some other value in future */
-    }
-
-    if (IncreaseTimerDuration) {
-       NewMaxModIntsPerSec =  M_DIMINFO.MaxModIntsPerSec +
-                             (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100;
-    } else {
-       NewMaxModIntsPerSec =  M_DIMINFO.MaxModIntsPerSec -
-                             (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100;
-    }
-
-    /* 
-    ** Check if we exceed boundaries...
-    */
-    if ( (NewMaxModIntsPerSec > M_DIMINFO.MaxModIntsPerSecUpperLimit) ||
-         (NewMaxModIntsPerSec < M_DIMINFO.MaxModIntsPerSecLowerLimit)) {
-        if (M_DIMINFO.DisplayStats) {
-            printk("Cannot change ModTim from %i to %i ints/sec\n",
-                   M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec);
-        }
-        return;
-    } else {
-        if (M_DIMINFO.DisplayStats) {
-            printk("Resized ModTim from %i to %i ints/sec\n",
-                   M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec);
-        }
-    }
-
-    M_DIMINFO.MaxModIntsPerSec = NewMaxModIntsPerSec;
-
-    if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
-        ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec;
-    } else {
-        ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec;
-    }
-
-    /* 
-    ** We do not need to touch any other registers
-    */
-    SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase);
-} 
-
-/*******************************************************************************
-** Function     : DisplaySelectedModerationType()
-** Description  : Displays what type of moderation we have
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : void!
-** Notes        : -
-*******************************************************************************/
-
-static void
-DisplaySelectedModerationType(SK_AC *pAC) {
-
-    if (pAC->DynIrqModInfo.DisplayStats) {
-        if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) {
-             printk("Static int moderation runs with %i INTS/sec\n",
-                    pAC->DynIrqModInfo.MaxModIntsPerSec);
-        } else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) {
-             if (IsIntModEnabled(pAC)) {
-                printk("Dynamic int moderation runs with %i INTS/sec\n",
-                       pAC->DynIrqModInfo.MaxModIntsPerSec);
-             } else {
-                printk("Dynamic int moderation currently not applied\n");
-             }
-        } else {
-             printk("No interrupt moderation selected!\n");
-        }
-    }
-}
-
-/*******************************************************************************
-** Function     : DisplaySelectedModerationMask()
-** Description  : Displays what interrupts are moderated
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : void!
-** Notes        : -
-*******************************************************************************/
-
-static void
-DisplaySelectedModerationMask(SK_AC *pAC) {
-
-    if (pAC->DynIrqModInfo.DisplayStats) {
-        if (pAC->DynIrqModInfo.IntModTypeSelect != C_INT_MOD_NONE) {
-            switch (pAC->DynIrqModInfo.MaskIrqModeration) {
-                case IRQ_MASK_TX_ONLY: 
-                   printk("Only Tx-interrupts are moderated\n");
-                   break;
-                case IRQ_MASK_RX_ONLY: 
-                   printk("Only Rx-interrupts are moderated\n");
-                   break;
-                case IRQ_MASK_SP_ONLY: 
-                   printk("Only special-interrupts are moderated\n");
-                   break;
-                case IRQ_MASK_TX_RX: 
-                   printk("Tx- and Rx-interrupts are moderated\n");
-                   break;
-                case IRQ_MASK_SP_RX: 
-                   printk("Special- and Rx-interrupts are moderated\n");
-                   break;
-                case IRQ_MASK_SP_TX: 
-                   printk("Special- and Tx-interrupts are moderated\n");
-                   break;
-                case IRQ_MASK_RX_TX_SP:
-                   printk("All Rx-, Tx and special-interrupts are moderated\n");
-                   break;
-                default:
-                   printk("Don't know what is moderated\n");
-                   break;
-            }
-        } else {
-            printk("No specific interrupts masked for moderation\n");
-        }
-    } 
-}
-
-/*******************************************************************************
-** Function     : DisplayDescrRatio
-** Description  : Like the name states...
-** Programmer   : Ralph Roesler
-** Last Modified: 23-mar-03
-** Returns      : void!
-** Notes        : -
-*******************************************************************************/
-
-static void
-DisplayDescrRatio(SK_AC *pAC) {
-    int TotalMaxNbrDescr = 0;
-
-    if (pAC->DynIrqModInfo.DisplayStats) {
-        TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC);
-        printk("Ratio descriptors: %i/%i\n",
-               M_DIMINFO.NbrProcessedDescr, TotalMaxNbrDescr);
-    }
-}
-
-/*******************************************************************************
-**
-** End of file
-**
-*******************************************************************************/
diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c
deleted file mode 100644
index 36460694eb82..000000000000
--- a/drivers/net/sk98lin/skethtool.c
+++ /dev/null
@@ -1,628 +0,0 @@
-/******************************************************************************
- *
- * Name:        skethtool.c
- * Project:     GEnesis, PCI Gigabit Ethernet Adapter
- * Version:     $Revision: 1.7 $
- * Date:        $Date: 2004/09/29 13:32:07 $
- * Purpose:     All functions regarding ethtool handling
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2004 Marvell.
- *
- *	Driver for Marvell Yukon/2 chipset and SysKonnect Gigabit Ethernet 
- *      Server Adapters.
- *
- *	Author: Ralph Roesler (rroesler@syskonnect.de)
- *	        Mirko Lindner (mlindner@syskonnect.de)
- *
- *	Address all question to: linux@syskonnect.de
- *
- *	The technical manual for the adapters is available from SysKonnect's
- *	web pages: www.syskonnect.com
- *	
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- *****************************************************************************/
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-#include "h/skversion.h"
-
-#include <linux/ethtool.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-
-/******************************************************************************
- *
- * Defines
- *
- *****************************************************************************/
-
-#define SUPP_COPPER_ALL (SUPPORTED_10baseT_Half  | SUPPORTED_10baseT_Full  | \
-                         SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
-                         SUPPORTED_1000baseT_Half| SUPPORTED_1000baseT_Full| \
-                         SUPPORTED_TP)
-
-#define ADV_COPPER_ALL  (ADVERTISED_10baseT_Half  | ADVERTISED_10baseT_Full  | \
-                         ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
-                         ADVERTISED_1000baseT_Half| ADVERTISED_1000baseT_Full| \
-                         ADVERTISED_TP)
-
-#define SUPP_FIBRE_ALL  (SUPPORTED_1000baseT_Full | \
-                         SUPPORTED_FIBRE          | \
-                         SUPPORTED_Autoneg)
-
-#define ADV_FIBRE_ALL   (ADVERTISED_1000baseT_Full | \
-                         ADVERTISED_FIBRE          | \
-                         ADVERTISED_Autoneg)
-
-
-/******************************************************************************
- *
- * Local Functions
- *
- *****************************************************************************/
-
-/*****************************************************************************
- *
- * 	getSettings - retrieves the current settings of the selected adapter
- *
- * Description:
- *	The current configuration of the selected adapter is returned.
- *	This configuration involves a)speed, b)duplex and c)autoneg plus
- *	a number of other variables.
- *
- * Returns:    always 0
- *
- */
-static int getSettings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
-	const DEV_NET *pNet = netdev_priv(dev);
-	int port = pNet->PortNr;
-	const SK_AC *pAC = pNet->pAC;
-	const SK_GEPORT *pPort = &pAC->GIni.GP[port];
-
-	static int DuplexAutoNegConfMap[9][3]= {
-		{ -1                     , -1         , -1              },
-		{ 0                      , -1         , -1              },
-		{ SK_LMODE_HALF          , DUPLEX_HALF, AUTONEG_DISABLE },
-		{ SK_LMODE_FULL          , DUPLEX_FULL, AUTONEG_DISABLE },
-		{ SK_LMODE_AUTOHALF      , DUPLEX_HALF, AUTONEG_ENABLE  },
-		{ SK_LMODE_AUTOFULL      , DUPLEX_FULL, AUTONEG_ENABLE  },
-		{ SK_LMODE_AUTOBOTH      , DUPLEX_FULL, AUTONEG_ENABLE  },
-		{ SK_LMODE_AUTOSENSE     , -1         , -1              },
-		{ SK_LMODE_INDETERMINATED, -1         , -1              }
-	};
-	static int SpeedConfMap[6][2] = {
-		{ 0                       , -1         },
-		{ SK_LSPEED_AUTO          , -1         },
-		{ SK_LSPEED_10MBPS        , SPEED_10   },
-		{ SK_LSPEED_100MBPS       , SPEED_100  },
-		{ SK_LSPEED_1000MBPS      , SPEED_1000 },
-		{ SK_LSPEED_INDETERMINATED, -1         }
-	};
-	static int AdvSpeedMap[6][2] = {
-		{ 0                       , -1         },
-		{ SK_LSPEED_AUTO          , -1         },
-		{ SK_LSPEED_10MBPS        , ADVERTISED_10baseT_Half   | ADVERTISED_10baseT_Full },
-		{ SK_LSPEED_100MBPS       , ADVERTISED_100baseT_Half  | ADVERTISED_100baseT_Full },
-		{ SK_LSPEED_1000MBPS      , ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full},
-		{ SK_LSPEED_INDETERMINATED, -1         }
-	};
-
-	ecmd->phy_address = port;
-	ecmd->speed       = SpeedConfMap[pPort->PLinkSpeedUsed][1];
-	ecmd->duplex      = DuplexAutoNegConfMap[pPort->PLinkModeStatus][1];
-	ecmd->autoneg     = DuplexAutoNegConfMap[pPort->PLinkModeStatus][2];
-	ecmd->transceiver = XCVR_INTERNAL;
-
-	if (pAC->GIni.GICopperType) {
-		ecmd->port        = PORT_TP;
-		ecmd->supported   = (SUPP_COPPER_ALL|SUPPORTED_Autoneg);
-		if (pAC->GIni.GIGenesis) {
-			ecmd->supported &= ~(SUPPORTED_10baseT_Half);
-			ecmd->supported &= ~(SUPPORTED_10baseT_Full);
-			ecmd->supported &= ~(SUPPORTED_100baseT_Half);
-			ecmd->supported &= ~(SUPPORTED_100baseT_Full);
-		} else {
-			if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
-				ecmd->supported &= ~(SUPPORTED_1000baseT_Half);
-			} 
-#ifdef CHIP_ID_YUKON_FE
-			if (pAC->GIni.GIChipId == CHIP_ID_YUKON_FE) {
-				ecmd->supported &= ~(SUPPORTED_1000baseT_Half);
-				ecmd->supported &= ~(SUPPORTED_1000baseT_Full);
-			}
-#endif
-		}
-		if (pAC->GIni.GP[0].PLinkSpeed != SK_LSPEED_AUTO) {
-			ecmd->advertising = AdvSpeedMap[pPort->PLinkSpeed][1];
-			if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
-				ecmd->advertising &= ~(SUPPORTED_1000baseT_Half);
-			} 
-		} else {
-			ecmd->advertising = ecmd->supported;
-		}
-
-		if (ecmd->autoneg == AUTONEG_ENABLE) 
-			ecmd->advertising |= ADVERTISED_Autoneg;
-	} else {
-		ecmd->port        = PORT_FIBRE;
-		ecmd->supported   = SUPP_FIBRE_ALL;
-		ecmd->advertising = ADV_FIBRE_ALL;
-	}
-	return 0;
-}
-
-/*
- * MIB infrastructure uses instance value starting at 1
- * based on board and port.
- */
-static inline u32 pnmiInstance(const DEV_NET *pNet)
-{
-	return 1 + (pNet->pAC->RlmtNets == 2) + pNet->PortNr;
-}
-
-/*****************************************************************************
- *
- *	setSettings - configures the settings of a selected adapter
- *
- * Description:
- *	Possible settings that may be altered are a)speed, b)duplex or 
- *	c)autonegotiation.
- *
- * Returns:
- *	0:	everything fine, no error
- *	<0:	the return value is the error code of the failure 
- */
-static int setSettings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-	u32 instance;
-	char buf[4];
-	int len = 1;
-
-	if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100 
-	    && ecmd->speed != SPEED_1000)
-		return -EINVAL;
-
-	if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
-		return -EINVAL;
-
-	if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
-		return -EINVAL;
-
-	if (ecmd->autoneg == AUTONEG_DISABLE)
-		*buf = (ecmd->duplex == DUPLEX_FULL) 
-			? SK_LMODE_FULL : SK_LMODE_HALF;
-	else
-		*buf = (ecmd->duplex == DUPLEX_FULL) 
-			? SK_LMODE_AUTOFULL : SK_LMODE_AUTOHALF;
-	
-	instance = pnmiInstance(pNet);
-	if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_LINK_MODE, 
-			   &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK)
-		return -EINVAL;
-
-	switch(ecmd->speed) {
-	case SPEED_1000:
-		*buf = SK_LSPEED_1000MBPS;
-		break;
-	case SPEED_100:
-		*buf = SK_LSPEED_100MBPS;
-		break;
-	case SPEED_10:
-		*buf = SK_LSPEED_10MBPS;
-	}
-
-	if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, 
-			 &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK)
-		return -EINVAL;
-
-	return 0;
-}
-
-/*****************************************************************************
- *
- * 	getDriverInfo - returns generic driver and adapter information
- *
- * Description:
- *	Generic driver information is returned via this function, such as
- *	the name of the driver, its version and and firmware version.
- *	In addition to this, the location of the selected adapter is 
- *	returned as a bus info string (e.g. '01:05.0').
- *	
- * Returns:	N/A
- *
- */
-static void getDriverInfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	const DEV_NET	*pNet = netdev_priv(dev);
-	const SK_AC *pAC = pNet->pAC;
-	char vers[32];
-
-	snprintf(vers, sizeof(vers)-1, VER_STRING "(v%d.%d)",
-		(pAC->GIni.GIPciHwRev >> 4) & 0xf, pAC->GIni.GIPciHwRev & 0xf);
-
-	strlcpy(info->driver, DRIVER_FILE_NAME, sizeof(info->driver));
-	strcpy(info->version, vers);
-	strcpy(info->fw_version, "N/A");
-	strlcpy(info->bus_info, pci_name(pAC->PciDev), ETHTOOL_BUSINFO_LEN);
-}
-
-/*
- * Ethtool statistics support.
- */
-static const char StringsStats[][ETH_GSTRING_LEN] = {
-	"rx_packets",	"tx_packets",
-	"rx_bytes",	"tx_bytes",
-	"rx_errors",	"tx_errors",	
-	"rx_dropped",	"tx_dropped",
-	"multicasts",	"collisions",	
-	"rx_length_errors",		"rx_buffer_overflow_errors",
-	"rx_crc_errors",		"rx_frame_errors",
-	"rx_too_short_errors",		"rx_too_long_errors",
-	"rx_carrier_extension_errors",	"rx_symbol_errors",
-	"rx_llc_mac_size_errors",	"rx_carrier_errors",	
-	"rx_jabber_errors",		"rx_missed_errors",
-	"tx_abort_collision_errors",	"tx_carrier_errors",
-	"tx_buffer_underrun_errors",	"tx_heartbeat_errors",
-	"tx_window_errors",
-};
-
-static int getStatsCount(struct net_device *dev)
-{
-	return ARRAY_SIZE(StringsStats);
-}
-
-static void getStrings(struct net_device *dev, u32 stringset, u8 *data)
-{
-	switch(stringset) {
-	case ETH_SS_STATS:
-		memcpy(data, *StringsStats, sizeof(StringsStats));
-		break;
-	}
-}
-
-static void getEthtoolStats(struct net_device *dev,
-			    struct ethtool_stats *stats, u64 *data)
-{
-	const DEV_NET	*pNet = netdev_priv(dev);
-	const SK_AC *pAC = pNet->pAC;
-	const SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct;
-
-	*data++ = pPnmiStruct->Stat[0].StatRxOkCts;
-	*data++ = pPnmiStruct->Stat[0].StatTxOkCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxOctetsOkCts;
-	*data++ = pPnmiStruct->Stat[0].StatTxOctetsOkCts;
-	*data++ = pPnmiStruct->InErrorsCts;
-	*data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts;
-	*data++ = pPnmiStruct->RxNoBufCts;
-	*data++ = pPnmiStruct->TxNoBufCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxMulticastOkCts;
-	*data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxRuntCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxFifoOverflowCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxFcsCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxFramingCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxShortsCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxTooLongCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxCextCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxSymbolCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxIRLengthCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxCarrierCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxJabberCts;
-	*data++ = pPnmiStruct->Stat[0].StatRxMissedCts;
-	*data++ = pAC->stats.tx_aborted_errors;
-	*data++ = pPnmiStruct->Stat[0].StatTxCarrierCts;
-	*data++ = pPnmiStruct->Stat[0].StatTxFifoUnderrunCts;
-	*data++ = pPnmiStruct->Stat[0].StatTxCarrierCts;
-	*data++ = pAC->stats.tx_window_errors;
-}
-
-
-/*****************************************************************************
- *
- * 	toggleLeds - Changes the LED state of an adapter
- *
- * Description:
- *	This function changes the current state of all LEDs of an adapter so
- *	that it can be located by a user. 
- *
- * Returns:	N/A
- *
- */
-static void toggleLeds(DEV_NET *pNet, int on)
-{
-	SK_AC *pAC = pNet->pAC;
-	int port = pNet->PortNr;
-	void __iomem *io = pAC->IoBase;
-
-	if (pAC->GIni.GIGenesis) {
-		SK_OUT8(io, MR_ADDR(port,LNK_LED_REG), 
-			on ? SK_LNK_ON : SK_LNK_OFF);
-		SkGeYellowLED(pAC, io, 
-			      on ? (LED_ON >> 1) : (LED_OFF >> 1));
-		SkGeXmitLED(pAC, io, MR_ADDR(port,RX_LED_INI),
-			    on ? SK_LED_TST : SK_LED_DIS);
-
-		if (pAC->GIni.GP[port].PhyType == SK_PHY_BCOM)
-			SkXmPhyWrite(pAC, io, port, PHY_BCOM_P_EXT_CTRL, 
-				     on ? PHY_B_PEC_LED_ON : PHY_B_PEC_LED_OFF);
-		else if (pAC->GIni.GP[port].PhyType == SK_PHY_LONE)
-			SkXmPhyWrite(pAC, io, port, PHY_LONE_LED_CFG,
-				     on ? 0x0800 : PHY_L_LC_LEDT);
-		else
-			SkGeXmitLED(pAC, io, MR_ADDR(port,TX_LED_INI),
-				    on ? SK_LED_TST : SK_LED_DIS);
-	} else {
-		const u16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON)  |
-				      PHY_M_LED_MO_10(MO_LED_ON)   |
-				      PHY_M_LED_MO_100(MO_LED_ON)  |
-				      PHY_M_LED_MO_1000(MO_LED_ON) | 
-				      PHY_M_LED_MO_RX(MO_LED_ON));
-		const u16  YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF)  |
-					PHY_M_LED_MO_10(MO_LED_OFF)   |
-					PHY_M_LED_MO_100(MO_LED_OFF)  |
-					PHY_M_LED_MO_1000(MO_LED_OFF) | 
-					PHY_M_LED_MO_RX(MO_LED_OFF));
-	
-
-		SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_CTRL,0);
-		SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_OVER, 
-			     on ? YukLedOn : YukLedOff);
-	}
-}
-
-/*****************************************************************************
- *
- * 	skGeBlinkTimer - Changes the LED state of an adapter
- *
- * Description:
- *	This function changes the current state of all LEDs of an adapter so
- *	that it can be located by a user. If the requested time interval for
- *	this test has elapsed, this function cleans up everything that was 
- *	temporarily setup during the locate NIC test. This involves of course
- *	also closing or opening any adapter so that the initial board state 
- *	is recovered.
- *
- * Returns:	N/A
- *
- */
-void SkGeBlinkTimer(unsigned long data)
-{
-	struct net_device *dev = (struct net_device *) data;
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-
-	toggleLeds(pNet, pAC->LedsOn);
-
-	pAC->LedsOn = !pAC->LedsOn;
-	mod_timer(&pAC->BlinkTimer, jiffies + HZ/4);
-}
-
-/*****************************************************************************
- *
- * 	locateDevice - start the locate NIC feature of the elected adapter 
- *
- * Description:
- *	This function is used if the user want to locate a particular NIC.
- *	All LEDs are regularly switched on and off, so the NIC can easily
- *	be identified.
- *
- * Returns:	
- *	==0:	everything fine, no error, locateNIC test was started
- *	!=0:	one locateNIC test runs already
- *
- */
-static int locateDevice(struct net_device *dev, u32 data)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-
-	if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
-
-	/* start blinking */
-	pAC->LedsOn = 0;
-	mod_timer(&pAC->BlinkTimer, jiffies);
-	msleep_interruptible(data * 1000);
-	del_timer_sync(&pAC->BlinkTimer);
-	toggleLeds(pNet, 0);
-
-	return 0;
-}
-
-/*****************************************************************************
- *
- * 	getPauseParams - retrieves the pause parameters
- *
- * Description:
- *	All current pause parameters of a selected adapter are placed 
- *	in the passed ethtool_pauseparam structure and are returned.
- *
- * Returns:	N/A
- *
- */
-static void getPauseParams(struct net_device *dev, struct ethtool_pauseparam *epause) 
-{
-	DEV_NET	*pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-	SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr];
-
-	epause->rx_pause = (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC) ||
-		  (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM);
-
-	epause->tx_pause = epause->rx_pause || (pPort->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND);
-	epause->autoneg = epause->rx_pause || epause->tx_pause;
-}
-
-/*****************************************************************************
- *
- *	setPauseParams - configures the pause parameters of an adapter
- *
- * Description:
- *	This function sets the Rx or Tx pause parameters 
- *
- * Returns:
- *	==0:	everything fine, no error
- *	!=0:	the return value is the error code of the failure 
- */
-static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *epause)
-{
-	DEV_NET	*pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-	SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr];
-	u32	instance = pnmiInstance(pNet);
-	struct ethtool_pauseparam old;
-	u8	oldspeed = pPort->PLinkSpeedUsed;
-	char	buf[4];
-	int	len = 1;
-	int ret;
-
-	/*
-	** we have to determine the current settings to see if 
-	** the operator requested any modification of the flow 
-	** control parameters...
-	*/
-	getPauseParams(dev, &old);
-
-	/*
-	** perform modifications regarding the changes 
-	** requested by the operator
-	*/
-	if (epause->autoneg != old.autoneg) 
-		*buf = epause->autoneg ? SK_FLOW_MODE_NONE : SK_FLOW_MODE_SYMMETRIC;
-	else {
-		if (epause->rx_pause && epause->tx_pause) 
-			*buf = SK_FLOW_MODE_SYMMETRIC;
-		else if (epause->rx_pause && !epause->tx_pause)
-			*buf =  SK_FLOW_MODE_SYM_OR_REM;
-		else if (!epause->rx_pause && epause->tx_pause)
-			*buf =  SK_FLOW_MODE_LOC_SEND;
-		else
-			*buf = SK_FLOW_MODE_NONE;
-	}
-
-	ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_FLOWCTRL_MODE,
-			 &buf, &len, instance, pNet->NetNr);
-
-	if (ret != SK_PNMI_ERR_OK) {
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL,
-			   ("ethtool (sk98lin): error changing rx/tx pause (%i)\n", ret));
-		goto err;
-	}
-
-	/*
-	** It may be that autoneg has been disabled! Therefore
-	** set the speed to the previously used value...
-	*/
-	if (!epause->autoneg) {
-		len = 1;
-		ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, 
-				   &oldspeed, &len, instance, pNet->NetNr);
-		if (ret != SK_PNMI_ERR_OK) 
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL,
-				   ("ethtool (sk98lin): error setting speed (%i)\n", ret));
-	}
- err:
-        return ret ? -EIO : 0;
-}
-
-/* Only Yukon supports checksum offload. */
-static int setScatterGather(struct net_device *dev, u32 data)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-
-	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
-		return -EOPNOTSUPP;
-	return ethtool_op_set_sg(dev, data);
-}
-
-static int setTxCsum(struct net_device *dev, u32 data)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-
-	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
-		return -EOPNOTSUPP;
-
-	return ethtool_op_set_tx_csum(dev, data);
-}
-
-static u32 getRxCsum(struct net_device *dev)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-
-	return pAC->RxPort[pNet->PortNr].RxCsum;
-}
-
-static int setRxCsum(struct net_device *dev, u32 data)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-
-	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS)
-		return -EOPNOTSUPP;
-
-	pAC->RxPort[pNet->PortNr].RxCsum = data != 0;
-	return 0;
-}
-
-static int getRegsLen(struct net_device *dev)
-{
-	return 0x4000;
-}
-
-/*
- * Returns copy of whole control register region
- * Note: skip RAM address register because accessing it will
- * 	 cause bus hangs!
- */
-static void getRegs(struct net_device *dev, struct ethtool_regs *regs,
-			  void *p)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	const void __iomem *io = pNet->pAC->IoBase;
-
-	regs->version = 1;
-	memset(p, 0, regs->len);
-	memcpy_fromio(p, io, B3_RAM_ADDR);
-
-	memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1,
-		      regs->len - B3_RI_WTO_R1);
-}
-
-const struct ethtool_ops SkGeEthtoolOps = {
-	.get_settings		= getSettings,
-	.set_settings		= setSettings,
-	.get_drvinfo		= getDriverInfo,
-	.get_strings		= getStrings,
-	.get_stats_count	= getStatsCount,
-	.get_ethtool_stats	= getEthtoolStats,
-	.phys_id		= locateDevice,
-	.get_pauseparam		= getPauseParams,
-	.set_pauseparam		= setPauseParams,
-	.get_link		= ethtool_op_get_link,
-	.get_perm_addr		= ethtool_op_get_perm_addr,
-	.get_sg			= ethtool_op_get_sg,
-	.set_sg			= setScatterGather,
-	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= setTxCsum,
-	.get_rx_csum		= getRxCsum,
-	.set_rx_csum		= setRxCsum,
-	.get_regs		= getRegs,
-	.get_regs_len		= getRegsLen,
-};
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
deleted file mode 100644
index bf218621db16..000000000000
--- a/drivers/net/sk98lin/skge.c
+++ /dev/null
@@ -1,5211 +0,0 @@
-/******************************************************************************
- *
- * Name:	skge.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.45 $
- * Date:       	$Date: 2004/02/12 14:41:02 $
- * Purpose:	The main driver source module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	Driver for Marvell Yukon chipset and SysKonnect Gigabit Ethernet 
- *      Server Adapters.
- *
- *	Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and
- *	SysKonnects GEnesis Solaris driver
- *	Author: Christoph Goos (cgoos@syskonnect.de)
- *	        Mirko Lindner (mlindner@syskonnect.de)
- *
- *	Address all question to: linux@syskonnect.de
- *
- *	The technical manual for the adapters is available from SysKonnect's
- *	web pages: www.syskonnect.com
- *	Goto "Support" and search Knowledge Base for "manual".
- *	
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Possible compiler options (#define xxx / -Dxxx):
- *
- *	debugging can be enable by changing SK_DEBUG_CHKMOD and
- *	SK_DEBUG_CHKCAT in makefile (described there).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- *	This is the main module of the Linux GE driver.
- *	
- *	All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h
- *	are part of SysKonnect's COMMON MODULES for the SK-98xx adapters.
- *	Those are used for drivers on multiple OS', so some thing may seem
- *	unnecessary complicated on Linux. Please do not try to 'clean up'
- *	them without VERY good reasons, because this will make it more
- *	difficult to keep the Linux driver in synchronisation with the
- *	other versions.
- *
- * Include file hierarchy:
- *
- *	<linux/module.h>
- *
- *	"h/skdrv1st.h"
- *		<linux/types.h>
- *		<linux/kernel.h>
- *		<linux/string.h>
- *		<linux/errno.h>
- *		<linux/ioport.h>
- *		<linux/slab.h>
- *		<linux/interrupt.h>
- *		<linux/pci.h>
- *		<linux/bitops.h>
- *		<asm/byteorder.h>
- *		<asm/io.h>
- *		<linux/netdevice.h>
- *		<linux/etherdevice.h>
- *		<linux/skbuff.h>
- *	    those three depending on kernel version used:
- *		<linux/bios32.h>
- *		<linux/init.h>
- *		<asm/uaccess.h>
- *		<net/checksum.h>
- *
- *		"h/skerror.h"
- *		"h/skdebug.h"
- *		"h/sktypes.h"
- *		"h/lm80.h"
- *		"h/xmac_ii.h"
- *
- *      "h/skdrv2nd.h"
- *		"h/skqueue.h"
- *		"h/skgehwt.h"
- *		"h/sktimer.h"
- *		"h/ski2c.h"
- *		"h/skgepnmi.h"
- *		"h/skvpd.h"
- *		"h/skgehw.h"
- *		"h/skgeinit.h"
- *		"h/skaddr.h"
- *		"h/skgesirq.h"
- *		"h/skrlmt.h"
- *
- ******************************************************************************/
-
-#include	"h/skversion.h"
-
-#include	<linux/in.h>
-#include	<linux/module.h>
-#include	<linux/moduleparam.h>
-#include	<linux/init.h>
-#include	<linux/dma-mapping.h>
-#include	<linux/ip.h>
-#include	<linux/mii.h>
-#include	<linux/mm.h>
-
-#include	"h/skdrv1st.h"
-#include	"h/skdrv2nd.h"
-
-/*******************************************************************************
- *
- * Defines
- *
- ******************************************************************************/
-
-/* for debuging on x86 only */
-/* #define BREAKPOINT() asm(" int $3"); */
-
-/* use the transmit hw checksum driver functionality */
-#define USE_SK_TX_CHECKSUM
-
-/* use the receive hw checksum driver functionality */
-#define USE_SK_RX_CHECKSUM
-
-/* use the scatter-gather functionality with sendfile() */
-#define SK_ZEROCOPY
-
-/* use of a transmit complete interrupt */
-#define USE_TX_COMPLETE
-
-/*
- * threshold for copying small receive frames
- * set to 0 to avoid copying, set to 9001 to copy all frames
- */
-#define SK_COPY_THRESHOLD	50
-
-/* number of adapters that can be configured via command line params */
-#define SK_MAX_CARD_PARAM	16
-
-
-
-/*
- * use those defines for a compile-in version of the driver instead
- * of command line parameters
- */
-// #define LINK_SPEED_A	{"Auto", }
-// #define LINK_SPEED_B	{"Auto", }
-// #define AUTO_NEG_A	{"Sense", }
-// #define AUTO_NEG_B	{"Sense", }
-// #define DUP_CAP_A	{"Both", }
-// #define DUP_CAP_B	{"Both", }
-// #define FLOW_CTRL_A	{"SymOrRem", }
-// #define FLOW_CTRL_B	{"SymOrRem", }
-// #define ROLE_A	{"Auto", }
-// #define ROLE_B	{"Auto", }
-// #define PREF_PORT	{"A", }
-// #define CON_TYPE 	{"Auto", }
-// #define RLMT_MODE	{"CheckLinkState", }
-
-#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb)
-#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb)
-#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb)
-
-
-/* Set blink mode*/
-#define OEM_CONFIG_VALUE (	SK_ACT_LED_BLINK | \
-				SK_DUP_LED_NORMAL | \
-				SK_LED_LINK100_ON)
-
-
-/* Isr return value */
-#define SkIsrRetVar	irqreturn_t
-#define SkIsrRetNone	IRQ_NONE
-#define SkIsrRetHandled	IRQ_HANDLED
-
-
-/*******************************************************************************
- *
- * Local Function Prototypes
- *
- ******************************************************************************/
-
-static void	FreeResources(struct SK_NET_DEVICE *dev);
-static int	SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC);
-static SK_BOOL	BoardAllocMem(SK_AC *pAC);
-static void	BoardFreeMem(SK_AC *pAC);
-static void	BoardInitMem(SK_AC *pAC);
-static void	SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**, int*, SK_BOOL);
-static SkIsrRetVar	SkGeIsr(int irq, void *dev_id);
-static SkIsrRetVar	SkGeIsrOnePort(int irq, void *dev_id);
-static int	SkGeOpen(struct SK_NET_DEVICE *dev);
-static int	SkGeClose(struct SK_NET_DEVICE *dev);
-static int	SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev);
-static int	SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p);
-static void	SkGeSetRxMode(struct SK_NET_DEVICE *dev);
-static struct	net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
-static int	SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
-static void	GetConfiguration(SK_AC*);
-static int	XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
-static void	FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
-static void	FillRxRing(SK_AC*, RX_PORT*);
-static SK_BOOL	FillRxDescriptor(SK_AC*, RX_PORT*);
-static void	ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL);
-static void	ClearAndStartRx(SK_AC*, int);
-static void	ClearTxIrq(SK_AC*, int, int);
-static void	ClearRxRing(SK_AC*, RX_PORT*);
-static void	ClearTxRing(SK_AC*, TX_PORT*);
-static int	SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu);
-static void	PortReInitBmu(SK_AC*, int);
-static int	SkGeIocMib(DEV_NET*, unsigned int, int);
-static int	SkGeInitPCI(SK_AC *pAC);
-static void	StartDrvCleanupTimer(SK_AC *pAC);
-static void	StopDrvCleanupTimer(SK_AC *pAC);
-static int	XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*);
-
-#ifdef SK_DIAG_SUPPORT
-static SK_U32   ParseDeviceNbrFromSlotName(const char *SlotName);
-static int      SkDrvInitAdapter(SK_AC *pAC, int devNbr);
-static int      SkDrvDeInitAdapter(SK_AC *pAC, int devNbr);
-#endif
-
-/*******************************************************************************
- *
- * Extern Function Prototypes
- *
- ******************************************************************************/
-extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);	
-extern void SkDimDisplayModerationSettings(SK_AC *pAC);
-extern void SkDimStartModerationTimer(SK_AC *pAC);
-extern void SkDimModerate(SK_AC *pAC);
-extern void SkGeBlinkTimer(unsigned long data);
-
-#ifdef DEBUG
-static void	DumpMsg(struct sk_buff*, char*);
-static void	DumpData(char*, int);
-static void	DumpLong(char*, int);
-#endif
-
-/* global variables *********************************************************/
-static SK_BOOL DoPrintInterfaceChange = SK_TRUE;
-extern const struct ethtool_ops SkGeEthtoolOps;
-
-/* local variables **********************************************************/
-static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}};
-static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};
-
-/*****************************************************************************
- *
- *	SkPciWriteCfgDWord - write a 32 bit value to pci config space
- *
- * Description:
- *	This routine writes a 32 bit value to the pci configuration
- *	space.
- *
- * Returns:
- *	0 - indicate everything worked ok.
- *	!= 0 - error indication
- */
-static inline int SkPciWriteCfgDWord(
-SK_AC *pAC,	/* Adapter Control structure pointer */
-int PciAddr,		/* PCI register address */
-SK_U32 Val)		/* pointer to store the read value */
-{
-	pci_write_config_dword(pAC->PciDev, PciAddr, Val);
-	return(0);
-} /* SkPciWriteCfgDWord */
-
-/*****************************************************************************
- *
- * 	SkGeInitPCI - Init the PCI resources
- *
- * Description:
- *	This function initialize the PCI resources and IO
- *
- * Returns:
- *	0 - indicate everything worked ok.
- *	!= 0 - error indication
- */
-static __devinit int SkGeInitPCI(SK_AC *pAC)
-{
-	struct SK_NET_DEVICE *dev = pAC->dev[0];
-	struct pci_dev *pdev = pAC->PciDev;
-	int retval;
-
-	dev->mem_start = pci_resource_start (pdev, 0);
-	pci_set_master(pdev);
-
-	retval = pci_request_regions(pdev, "sk98lin");
-	if (retval)
-		goto out;
-
-#ifdef SK_BIG_ENDIAN
-	/*
-	 * On big endian machines, we use the adapter's aibility of
-	 * reading the descriptors as big endian.
-	 */
-	{
-		SK_U32		our2;
-		SkPciReadCfgDWord(pAC, PCI_OUR_REG_2, &our2);
-		our2 |= PCI_REV_DESC;
-		SkPciWriteCfgDWord(pAC, PCI_OUR_REG_2, our2);
-	}
-#endif
-
-	/*
-	 * Remap the regs into kernel space.
-	 */
-	pAC->IoBase = ioremap_nocache(dev->mem_start, 0x4000);
-	if (!pAC->IoBase) {
-		retval = -EIO;
-		goto out_release;
-	}
-
-	return 0;
-
- out_release:
-	pci_release_regions(pdev);
- out:
-	return retval;
-}
-
-
-/*****************************************************************************
- *
- * 	FreeResources - release resources allocated for adapter
- *
- * Description:
- *	This function releases the IRQ, unmaps the IO and
- *	frees the desriptor ring.
- *
- * Returns: N/A
- *	
- */
-static void FreeResources(struct SK_NET_DEVICE *dev)
-{
-SK_U32 AllocFlag;
-DEV_NET		*pNet;
-SK_AC		*pAC;
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-	AllocFlag = pAC->AllocFlag;
-	if (pAC->PciDev) {
-		pci_release_regions(pAC->PciDev);
-	}
-	if (AllocFlag & SK_ALLOC_IRQ) {
-		free_irq(dev->irq, dev);
-	}
-	if (pAC->IoBase) {
-		iounmap(pAC->IoBase);
-	}
-	if (pAC->pDescrMem) {
-		BoardFreeMem(pAC);
-	}
-	
-} /* FreeResources */
-
-MODULE_AUTHOR("Mirko Lindner <mlindner@syskonnect.de>");
-MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver");
-MODULE_LICENSE("GPL");
-
-#ifdef LINK_SPEED_A
-static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED;
-#else
-static char *Speed_A[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef LINK_SPEED_B
-static char *Speed_B[SK_MAX_CARD_PARAM] = LINK_SPEED;
-#else
-static char *Speed_B[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef AUTO_NEG_A
-static char *AutoNeg_A[SK_MAX_CARD_PARAM] = AUTO_NEG_A;
-#else
-static char *AutoNeg_A[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef DUP_CAP_A
-static char *DupCap_A[SK_MAX_CARD_PARAM] = DUP_CAP_A;
-#else
-static char *DupCap_A[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef FLOW_CTRL_A
-static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = FLOW_CTRL_A;
-#else
-static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef ROLE_A
-static char *Role_A[SK_MAX_CARD_PARAM] = ROLE_A;
-#else
-static char *Role_A[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef AUTO_NEG_B
-static char *AutoNeg_B[SK_MAX_CARD_PARAM] = AUTO_NEG_B;
-#else
-static char *AutoNeg_B[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef DUP_CAP_B
-static char *DupCap_B[SK_MAX_CARD_PARAM] = DUP_CAP_B;
-#else
-static char *DupCap_B[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef FLOW_CTRL_B
-static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = FLOW_CTRL_B;
-#else
-static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef ROLE_B
-static char *Role_B[SK_MAX_CARD_PARAM] = ROLE_B;
-#else
-static char *Role_B[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef CON_TYPE
-static char *ConType[SK_MAX_CARD_PARAM] = CON_TYPE;
-#else
-static char *ConType[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef PREF_PORT
-static char *PrefPort[SK_MAX_CARD_PARAM] = PREF_PORT;
-#else
-static char *PrefPort[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-#ifdef RLMT_MODE
-static char *RlmtMode[SK_MAX_CARD_PARAM] = RLMT_MODE;
-#else
-static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", };
-#endif
-
-static int   IntsPerSec[SK_MAX_CARD_PARAM];
-static char *Moderation[SK_MAX_CARD_PARAM];
-static char *ModerationMask[SK_MAX_CARD_PARAM];
-static char *AutoSizing[SK_MAX_CARD_PARAM];
-static char *Stats[SK_MAX_CARD_PARAM];
-
-module_param_array(Speed_A, charp, NULL, 0);
-module_param_array(Speed_B, charp, NULL, 0);
-module_param_array(AutoNeg_A, charp, NULL, 0);
-module_param_array(AutoNeg_B, charp, NULL, 0);
-module_param_array(DupCap_A, charp, NULL, 0);
-module_param_array(DupCap_B, charp, NULL, 0);
-module_param_array(FlowCtrl_A, charp, NULL, 0);
-module_param_array(FlowCtrl_B, charp, NULL, 0);
-module_param_array(Role_A, charp, NULL, 0);
-module_param_array(Role_B, charp, NULL, 0);
-module_param_array(ConType, charp, NULL, 0);
-module_param_array(PrefPort, charp, NULL, 0);
-module_param_array(RlmtMode, charp, NULL, 0);
-/* used for interrupt moderation */
-module_param_array(IntsPerSec, int, NULL, 0);
-module_param_array(Moderation, charp, NULL, 0);
-module_param_array(Stats, charp, NULL, 0);
-module_param_array(ModerationMask, charp, NULL, 0);
-module_param_array(AutoSizing, charp, NULL, 0);
-
-/*****************************************************************************
- *
- * 	SkGeBoardInit - do level 0 and 1 initialization
- *
- * Description:
- *	This function prepares the board hardware for running. The desriptor
- *	ring is set up, the IRQ is allocated and the configuration settings
- *	are examined.
- *
- * Returns:
- *	0, if everything is ok
- *	!=0, on error
- */
-static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
-{
-short	i;
-unsigned long Flags;
-char	*DescrString = "sk98lin: Driver for Linux"; /* this is given to PNMI */
-char	*VerStr	= VER_STRING;
-int	Ret;			/* return code of request_irq */
-SK_BOOL	DualNet;
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("IoBase: %08lX\n", (unsigned long)pAC->IoBase));
-	for (i=0; i<SK_MAX_MACS; i++) {
-		pAC->TxPort[i][0].HwAddr = pAC->IoBase + TxQueueAddr[i][0];
-		pAC->TxPort[i][0].PortIndex = i;
-		pAC->RxPort[i].HwAddr = pAC->IoBase + RxQueueAddr[i];
-		pAC->RxPort[i].PortIndex = i;
-	}
-
-	/* Initialize the mutexes */
-	for (i=0; i<SK_MAX_MACS; i++) {
-		spin_lock_init(&pAC->TxPort[i][0].TxDesRingLock);
-		spin_lock_init(&pAC->RxPort[i].RxDesRingLock);
-	}
-	spin_lock_init(&pAC->SlowPathLock);
-
-	/* setup phy_id blink timer */
-	pAC->BlinkTimer.function = SkGeBlinkTimer;
-	pAC->BlinkTimer.data = (unsigned long) dev;
-	init_timer(&pAC->BlinkTimer);
-
-	/* level 0 init common modules here */
-	
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-	/* Does a RESET on board ...*/
-	if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) {
-		printk("HWInit (0) failed.\n");
-		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-		return -EIO;
-	}
-	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_DATA);
-	SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA);
-	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_DATA);
-	SkAddrInit( pAC, pAC->IoBase, SK_INIT_DATA);
-	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_DATA);
-	SkTimerInit(pAC, pAC->IoBase, SK_INIT_DATA);
-
-	pAC->BoardLevel = SK_INIT_DATA;
-	pAC->RxBufSize  = ETH_BUF_SIZE;
-
-	SK_PNMI_SET_DRIVER_DESCR(pAC, DescrString);
-	SK_PNMI_SET_DRIVER_VER(pAC, VerStr);
-
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-
-	/* level 1 init common modules here (HW init) */
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-	if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
-		printk("sk98lin: HWInit (1) failed.\n");
-		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-		return -EIO;
-	}
-	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_IO);
-	SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
-	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO);
-	SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO);
-	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO);
-	SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO);
-
-	/* Set chipset type support */
-	pAC->ChipsetType = 0;
-	if ((pAC->GIni.GIChipId == CHIP_ID_YUKON) ||
-		(pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE)) {
-		pAC->ChipsetType = 1;
-	}
-
-	GetConfiguration(pAC);
-	if (pAC->RlmtNets == 2) {
-		pAC->GIni.GIPortUsage = SK_MUL_LINK;
-	}
-
-	pAC->BoardLevel = SK_INIT_IO;
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-
-	if (pAC->GIni.GIMacsFound == 2) {
-		 Ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
-	} else if (pAC->GIni.GIMacsFound == 1) {
-		Ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED,
-			"sk98lin", dev);
-	} else {
-		printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
-		       pAC->GIni.GIMacsFound);
-		return -EIO;
-	}
-
-	if (Ret) {
-		printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n",
-		       dev->irq);
-		return Ret;
-	}
-	pAC->AllocFlag |= SK_ALLOC_IRQ;
-
-	/* Alloc memory for this board (Mem for RxD/TxD) : */
-	if(!BoardAllocMem(pAC)) {
-		printk("No memory for descriptor rings.\n");
-		return -ENOMEM;
-	}
-
-	BoardInitMem(pAC);
-	/* tschilling: New common function with minimum size check. */
-	DualNet = SK_FALSE;
-	if (pAC->RlmtNets == 2) {
-		DualNet = SK_TRUE;
-	}
-	
-	if (SkGeInitAssignRamToQueues(
-		pAC,
-		pAC->ActivePort,
-		DualNet)) {
-		BoardFreeMem(pAC);
-		printk("sk98lin: SkGeInitAssignRamToQueues failed.\n");
-		return -EIO;
-	}
-
-	return (0);
-} /* SkGeBoardInit */
-
-
-/*****************************************************************************
- *
- * 	BoardAllocMem - allocate the memory for the descriptor rings
- *
- * Description:
- *	This function allocates the memory for all descriptor rings.
- *	Each ring is aligned for the desriptor alignment and no ring
- *	has a 4 GByte boundary in it (because the upper 32 bit must
- *	be constant for all descriptiors in one rings).
- *
- * Returns:
- *	SK_TRUE, if all memory could be allocated
- *	SK_FALSE, if not
- */
-static __devinit SK_BOOL BoardAllocMem(SK_AC	*pAC)
-{
-caddr_t		pDescrMem;	/* pointer to descriptor memory area */
-size_t		AllocLength;	/* length of complete descriptor area */
-int		i;		/* loop counter */
-unsigned long	BusAddr;
-
-	
-	/* rings plus one for alignment (do not cross 4 GB boundary) */
-	/* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */
-#if (BITS_PER_LONG == 32)
-	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
-#else
-	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
-		+ RX_RING_SIZE + 8;
-#endif
-
-	pDescrMem = pci_alloc_consistent(pAC->PciDev, AllocLength,
-					 &pAC->pDescrMemDMA);
-
-	if (pDescrMem == NULL) {
-		return (SK_FALSE);
-	}
-	pAC->pDescrMem = pDescrMem;
-	BusAddr = (unsigned long) pAC->pDescrMemDMA;
-
-	/* Descriptors need 8 byte alignment, and this is ensured
-	 * by pci_alloc_consistent.
-	 */
-	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
-			("TX%d/A: pDescrMem: %lX,   PhysDescrMem: %lX\n",
-			i, (unsigned long) pDescrMem,
-			BusAddr));
-		pAC->TxPort[i][0].pTxDescrRing = pDescrMem;
-		pAC->TxPort[i][0].VTxDescrRing = BusAddr;
-		pDescrMem += TX_RING_SIZE;
-		BusAddr += TX_RING_SIZE;
-	
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
-			("RX%d: pDescrMem: %lX,   PhysDescrMem: %lX\n",
-			i, (unsigned long) pDescrMem,
-			(unsigned long)BusAddr));
-		pAC->RxPort[i].pRxDescrRing = pDescrMem;
-		pAC->RxPort[i].VRxDescrRing = BusAddr;
-		pDescrMem += RX_RING_SIZE;
-		BusAddr += RX_RING_SIZE;
-	} /* for */
-	
-	return (SK_TRUE);
-} /* BoardAllocMem */
-
-
-/****************************************************************************
- *
- *	BoardFreeMem - reverse of BoardAllocMem
- *
- * Description:
- *	Free all memory allocated in BoardAllocMem: adapter context,
- *	descriptor rings, locks.
- *
- * Returns:	N/A
- */
-static void BoardFreeMem(
-SK_AC		*pAC)
-{
-size_t		AllocLength;	/* length of complete descriptor area */
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("BoardFreeMem\n"));
-#if (BITS_PER_LONG == 32)
-	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8;
-#else
-	AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound
-		+ RX_RING_SIZE + 8;
-#endif
-
-	pci_free_consistent(pAC->PciDev, AllocLength,
-			    pAC->pDescrMem, pAC->pDescrMemDMA);
-	pAC->pDescrMem = NULL;
-} /* BoardFreeMem */
-
-
-/*****************************************************************************
- *
- * 	BoardInitMem - initiate the descriptor rings
- *
- * Description:
- *	This function sets the descriptor rings up in memory.
- *	The adapter is initialized with the descriptor start addresses.
- *
- * Returns:	N/A
- */
-static __devinit void BoardInitMem(SK_AC *pAC)
-{
-int	i;		/* loop counter */
-int	RxDescrSize;	/* the size of a rx descriptor rounded up to alignment*/
-int	TxDescrSize;	/* the size of a tx descriptor rounded up to alignment*/
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("BoardInitMem\n"));
-
-	RxDescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
-	pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize;
-	TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN;
-	pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize;
-	
-	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-		SetupRing(
-			pAC,
-			pAC->TxPort[i][0].pTxDescrRing,
-			pAC->TxPort[i][0].VTxDescrRing,
-			(RXD**)&pAC->TxPort[i][0].pTxdRingHead,
-			(RXD**)&pAC->TxPort[i][0].pTxdRingTail,
-			(RXD**)&pAC->TxPort[i][0].pTxdRingPrev,
-			&pAC->TxPort[i][0].TxdRingFree,
-			SK_TRUE);
-		SetupRing(
-			pAC,
-			pAC->RxPort[i].pRxDescrRing,
-			pAC->RxPort[i].VRxDescrRing,
-			&pAC->RxPort[i].pRxdRingHead,
-			&pAC->RxPort[i].pRxdRingTail,
-			&pAC->RxPort[i].pRxdRingPrev,
-			&pAC->RxPort[i].RxdRingFree,
-			SK_FALSE);
-	}
-} /* BoardInitMem */
-
-
-/*****************************************************************************
- *
- * 	SetupRing - create one descriptor ring
- *
- * Description:
- *	This function creates one descriptor ring in the given memory area.
- *	The head, tail and number of free descriptors in the ring are set.
- *
- * Returns:
- *	none
- */
-static void SetupRing(
-SK_AC		*pAC,
-void		*pMemArea,	/* a pointer to the memory area for the ring */
-uintptr_t	VMemArea,	/* the virtual bus address of the memory area */
-RXD		**ppRingHead,	/* address where the head should be written */
-RXD		**ppRingTail,	/* address where the tail should be written */
-RXD		**ppRingPrev,	/* address where the tail should be written */
-int		*pRingFree,	/* address where the # of free descr. goes */
-SK_BOOL		IsTx)		/* flag: is this a tx ring */
-{
-int	i;		/* loop counter */
-int	DescrSize;	/* the size of a descriptor rounded up to alignment*/
-int	DescrNum;	/* number of descriptors per ring */
-RXD	*pDescr;	/* pointer to a descriptor (receive or transmit) */
-RXD	*pNextDescr;	/* pointer to the next descriptor */
-RXD	*pPrevDescr;	/* pointer to the previous descriptor */
-uintptr_t VNextDescr;	/* the virtual bus address of the next descriptor */
-
-	if (IsTx == SK_TRUE) {
-		DescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) *
-			DESCR_ALIGN;
-		DescrNum = TX_RING_SIZE / DescrSize;
-	} else {
-		DescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) *
-			DESCR_ALIGN;
-		DescrNum = RX_RING_SIZE / DescrSize;
-	}
-	
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS,
-		("Descriptor size: %d   Descriptor Number: %d\n",
-		DescrSize,DescrNum));
-	
-	pDescr = (RXD*) pMemArea;
-	pPrevDescr = NULL;
-	pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
-	VNextDescr = VMemArea + DescrSize;
-	for(i=0; i<DescrNum; i++) {
-		/* set the pointers right */
-		pDescr->VNextRxd = VNextDescr & 0xffffffffULL;
-		pDescr->pNextRxd = pNextDescr;
-		if (!IsTx) pDescr->TcpSumStarts = ETH_HLEN << 16 | ETH_HLEN;
-
-		/* advance one step */
-		pPrevDescr = pDescr;
-		pDescr = pNextDescr;
-		pNextDescr = (RXD*) (((char*)pDescr) + DescrSize);
-		VNextDescr += DescrSize;
-	}
-	pPrevDescr->pNextRxd = (RXD*) pMemArea;
-	pPrevDescr->VNextRxd = VMemArea;
-	pDescr = (RXD*) pMemArea;
-	*ppRingHead = (RXD*) pMemArea;
-	*ppRingTail = *ppRingHead;
-	*ppRingPrev = pPrevDescr;
-	*pRingFree = DescrNum;
-} /* SetupRing */
-
-
-/*****************************************************************************
- *
- * 	PortReInitBmu - re-initiate the descriptor rings for one port
- *
- * Description:
- *	This function reinitializes the descriptor rings of one port
- *	in memory. The port must be stopped before.
- *	The HW is initialized with the descriptor start addresses.
- *
- * Returns:
- *	none
- */
-static void PortReInitBmu(
-SK_AC	*pAC,		/* pointer to adapter context */
-int	PortIndex)	/* index of the port for which to re-init */
-{
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("PortReInitBmu "));
-
-	/* set address of first descriptor of ring in BMU */
-	SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_L,
-		(uint32_t)(((caddr_t)
-		(pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
-		pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
-		pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) &
-		0xFFFFFFFF));
-	SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_H,
-		(uint32_t)(((caddr_t)
-		(pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) -
-		pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing +
-		pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) >> 32));
-	SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_L,
-		(uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
-		pAC->RxPort[PortIndex].pRxDescrRing +
-		pAC->RxPort[PortIndex].VRxDescrRing) & 0xFFFFFFFF));
-	SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_H,
-		(uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) -
-		pAC->RxPort[PortIndex].pRxDescrRing +
-		pAC->RxPort[PortIndex].VRxDescrRing) >> 32));
-} /* PortReInitBmu */
-
-
-/****************************************************************************
- *
- *	SkGeIsr - handle adapter interrupts
- *
- * Description:
- *	The interrupt routine is called when the network adapter
- *	generates an interrupt. It may also be called if another device
- *	shares this interrupt vector with the driver.
- *
- * Returns: N/A
- *
- */
-static SkIsrRetVar SkGeIsr(int irq, void *dev_id)
-{
-struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
-DEV_NET		*pNet;
-SK_AC		*pAC;
-SK_U32		IntSrc;		/* interrupts source register contents */	
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-	
-	/*
-	 * Check and process if its our interrupt
-	 */
-	SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
-	if (IntSrc == 0) {
-		return SkIsrRetNone;
-	}
-
-	while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
-#if 0 /* software irq currently not used */
-		if (IntSrc & IS_IRQ_SW) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("Software IRQ\n"));
-		}
-#endif
-		if (IntSrc & IS_R1_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF RX1 IRQ\n"));
-			ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
-			SK_PNMI_CNT_RX_INTR(pAC, 0);
-		}
-		if (IntSrc & IS_R2_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF RX2 IRQ\n"));
-			ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);
-			SK_PNMI_CNT_RX_INTR(pAC, 1);
-		}
-#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
-		if (IntSrc & IS_XA1_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF AS TX1 IRQ\n"));
-			SK_PNMI_CNT_TX_INTR(pAC, 0);
-			spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
-			FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
-			spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
-		}
-		if (IntSrc & IS_XA2_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF AS TX2 IRQ\n"));
-			SK_PNMI_CNT_TX_INTR(pAC, 1);
-			spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
-			FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]);
-			spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock);
-		}
-#if 0 /* only if sync. queues used */
-		if (IntSrc & IS_XS1_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF SY TX1 IRQ\n"));
-			SK_PNMI_CNT_TX_INTR(pAC, 1);
-			spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
-			FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
-			spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
-			ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
-		}
-		if (IntSrc & IS_XS2_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF SY TX2 IRQ\n"));
-			SK_PNMI_CNT_TX_INTR(pAC, 1);
-			spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
-			FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH);
-			spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock);
-			ClearTxIrq(pAC, 1, TX_PRIO_HIGH);
-		}
-#endif
-#endif
-
-		/* do all IO at once */
-		if (IntSrc & IS_R1_F)
-			ClearAndStartRx(pAC, 0);
-		if (IntSrc & IS_R2_F)
-			ClearAndStartRx(pAC, 1);
-#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
-		if (IntSrc & IS_XA1_F)
-			ClearTxIrq(pAC, 0, TX_PRIO_LOW);
-		if (IntSrc & IS_XA2_F)
-			ClearTxIrq(pAC, 1, TX_PRIO_LOW);
-#endif
-		SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
-	} /* while (IntSrc & IRQ_MASK != 0) */
-
-	IntSrc &= pAC->GIni.GIValIrqMask;
-	if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
-			("SPECIAL IRQ DP-Cards => %x\n", IntSrc));
-		pAC->CheckQueue = SK_FALSE;
-		spin_lock(&pAC->SlowPathLock);
-		if (IntSrc & SPECIAL_IRQS)
-			SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);
-
-		SkEventDispatcher(pAC, pAC->IoBase);
-		spin_unlock(&pAC->SlowPathLock);
-	}
-	/*
-	 * do it all again is case we cleared an interrupt that
-	 * came in after handling the ring (OUTs may be delayed
-	 * in hardware buffers, but are through after IN)
-	 *
-	 * rroesler: has been commented out and shifted to
-	 *           SkGeDrvEvent(), because it is timer
-	 *           guarded now
-	 *
-	ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
-	ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE);
-	 */
-
-	if (pAC->CheckQueue) {
-		pAC->CheckQueue = SK_FALSE;
-		spin_lock(&pAC->SlowPathLock);
-		SkEventDispatcher(pAC, pAC->IoBase);
-		spin_unlock(&pAC->SlowPathLock);
-	}
-
-	/* IRQ is processed - Enable IRQs again*/
-	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
-
-		return SkIsrRetHandled;
-} /* SkGeIsr */
-
-
-/****************************************************************************
- *
- *	SkGeIsrOnePort - handle adapter interrupts for single port adapter
- *
- * Description:
- *	The interrupt routine is called when the network adapter
- *	generates an interrupt. It may also be called if another device
- *	shares this interrupt vector with the driver.
- *	This is the same as above, but handles only one port.
- *
- * Returns: N/A
- *
- */
-static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id)
-{
-struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id;
-DEV_NET		*pNet;
-SK_AC		*pAC;
-SK_U32		IntSrc;		/* interrupts source register contents */	
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-	
-	/*
-	 * Check and process if its our interrupt
-	 */
-	SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc);
-	if (IntSrc == 0) {
-		return SkIsrRetNone;
-	}
-	
-	while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) {
-#if 0 /* software irq currently not used */
-		if (IntSrc & IS_IRQ_SW) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("Software IRQ\n"));
-		}
-#endif
-		if (IntSrc & IS_R1_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF RX1 IRQ\n"));
-			ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
-			SK_PNMI_CNT_RX_INTR(pAC, 0);
-		}
-#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
-		if (IntSrc & IS_XA1_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF AS TX1 IRQ\n"));
-			SK_PNMI_CNT_TX_INTR(pAC, 0);
-			spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
-			FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]);
-			spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock);
-		}
-#if 0 /* only if sync. queues used */
-		if (IntSrc & IS_XS1_F) {
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_INT_SRC,
-				("EOF SY TX1 IRQ\n"));
-			SK_PNMI_CNT_TX_INTR(pAC, 0);
-			spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
-			FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH);
-			spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock);
-			ClearTxIrq(pAC, 0, TX_PRIO_HIGH);
-		}
-#endif
-#endif
-
-		/* do all IO at once */
-		if (IntSrc & IS_R1_F)
-			ClearAndStartRx(pAC, 0);
-#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */
-		if (IntSrc & IS_XA1_F)
-			ClearTxIrq(pAC, 0, TX_PRIO_LOW);
-#endif
-		SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc);
-	} /* while (IntSrc & IRQ_MASK != 0) */
-	
-	IntSrc &= pAC->GIni.GIValIrqMask;
-	if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) {
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC,
-			("SPECIAL IRQ SP-Cards => %x\n", IntSrc));
-		pAC->CheckQueue = SK_FALSE;
-		spin_lock(&pAC->SlowPathLock);
-		if (IntSrc & SPECIAL_IRQS)
-			SkGeSirqIsr(pAC, pAC->IoBase, IntSrc);
-
-		SkEventDispatcher(pAC, pAC->IoBase);
-		spin_unlock(&pAC->SlowPathLock);
-	}
-	/*
-	 * do it all again is case we cleared an interrupt that
-	 * came in after handling the ring (OUTs may be delayed
-	 * in hardware buffers, but are through after IN)
-	 *
-	 * rroesler: has been commented out and shifted to
-	 *           SkGeDrvEvent(), because it is timer
-	 *           guarded now
-	 *
-	ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE);
-	 */
-
-	/* IRQ is processed - Enable IRQs again*/
-	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
-
-		return SkIsrRetHandled;
-} /* SkGeIsrOnePort */
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/****************************************************************************
- *
- * 	SkGePollController - polling receive, for netconsole
- *
- * Description:
- *	Polling receive - used by netconsole and other diagnostic tools
- *	to allow network i/o with interrupts disabled.
- *
- * Returns: N/A
- */
-static void SkGePollController(struct net_device *dev)
-{
-	disable_irq(dev->irq);
-	SkGeIsr(dev->irq, dev);
-	enable_irq(dev->irq);
-}
-#endif
-
-/****************************************************************************
- *
- *	SkGeOpen - handle start of initialized adapter
- *
- * Description:
- *	This function starts the initialized adapter.
- *	The board level variable is set and the adapter is
- *	brought to full functionality.
- *	The device flags are set for operation.
- *	Do all necessary level 2 initialization, enable interrupts and
- *	give start command to RLMT.
- *
- * Returns:
- *	0 on success
- *	!= 0 on error
- */
-static int SkGeOpen(
-struct SK_NET_DEVICE	*dev)
-{
-	DEV_NET			*pNet;
-	SK_AC			*pAC;
-	unsigned long	Flags;		/* for spin lock */
-	int				i;
-	SK_EVPARA		EvPara;		/* an event parameter union */
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-	
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC));
-
-#ifdef SK_DIAG_SUPPORT
-	if (pAC->DiagModeActive == DIAG_ACTIVE) {
-		if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) {
-			return (-1);   /* still in use by diag; deny actions */
-		} 
-	}
-#endif
-
-	/* Set blink mode */
-	if ((pAC->PciDev->vendor == 0x1186) || (pAC->PciDev->vendor == 0x11ab ))
-		pAC->GIni.GILedBlinkCtrl = OEM_CONFIG_VALUE;
-
-	if (pAC->BoardLevel == SK_INIT_DATA) {
-		/* level 1 init common modules here */
-		if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
-			printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name);
-			return (-1);
-		}
-		SkI2cInit	(pAC, pAC->IoBase, SK_INIT_IO);
-		SkEventInit	(pAC, pAC->IoBase, SK_INIT_IO);
-		SkPnmiInit	(pAC, pAC->IoBase, SK_INIT_IO);
-		SkAddrInit	(pAC, pAC->IoBase, SK_INIT_IO);
-		SkRlmtInit	(pAC, pAC->IoBase, SK_INIT_IO);
-		SkTimerInit	(pAC, pAC->IoBase, SK_INIT_IO);
-		pAC->BoardLevel = SK_INIT_IO;
-	}
-
-	if (pAC->BoardLevel != SK_INIT_RUN) {
-		/* tschilling: Level 2 init modules here, check return value. */
-		if (SkGeInit(pAC, pAC->IoBase, SK_INIT_RUN) != 0) {
-			printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name);
-			return (-1);
-		}
-		SkI2cInit	(pAC, pAC->IoBase, SK_INIT_RUN);
-		SkEventInit	(pAC, pAC->IoBase, SK_INIT_RUN);
-		SkPnmiInit	(pAC, pAC->IoBase, SK_INIT_RUN);
-		SkAddrInit	(pAC, pAC->IoBase, SK_INIT_RUN);
-		SkRlmtInit	(pAC, pAC->IoBase, SK_INIT_RUN);
-		SkTimerInit	(pAC, pAC->IoBase, SK_INIT_RUN);
-		pAC->BoardLevel = SK_INIT_RUN;
-	}
-
-	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-		/* Enable transmit descriptor polling. */
-		SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
-		FillRxRing(pAC, &pAC->RxPort[i]);
-	}
-	SkGeYellowLED(pAC, pAC->IoBase, 1);
-
-	StartDrvCleanupTimer(pAC);
-	SkDimEnableModerationIfNeeded(pAC);	
-	SkDimDisplayModerationSettings(pAC);
-
-	pAC->GIni.GIValIrqMask &= IRQ_MASK;
-
-	/* enable Interrupts */
-	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
-	SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);
-
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-
-	if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) {
-		EvPara.Para32[0] = pAC->RlmtNets;
-		EvPara.Para32[1] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS,
-			EvPara);
-		EvPara.Para32[0] = pAC->RlmtMode;
-		EvPara.Para32[1] = 0;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE,
-			EvPara);
-	}
-
-	EvPara.Para32[0] = pNet->NetNr;
-	EvPara.Para32[1] = -1;
-	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
-	SkEventDispatcher(pAC, pAC->IoBase);
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-
-	pAC->MaxPorts++;
-
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeOpen suceeded\n"));
-
-	return (0);
-} /* SkGeOpen */
-
-
-/****************************************************************************
- *
- *	SkGeClose - Stop initialized adapter
- *
- * Description:
- *	Close initialized adapter.
- *
- * Returns:
- *	0 - on success
- *	error code - on error
- */
-static int SkGeClose(
-struct SK_NET_DEVICE	*dev)
-{
-	DEV_NET		*pNet;
-	DEV_NET		*newPtrNet;
-	SK_AC		*pAC;
-
-	unsigned long	Flags;		/* for spin lock */
-	int		i;
-	int		PortIdx;
-	SK_EVPARA	EvPara;
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeClose: pAC=0x%lX ", (unsigned long)pAC));
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-
-#ifdef SK_DIAG_SUPPORT
-	if (pAC->DiagModeActive == DIAG_ACTIVE) {
-		if (pAC->DiagFlowCtrl == SK_FALSE) {
-			/* 
-			** notify that the interface which has been closed
-			** by operator interaction must not be started up 
-			** again when the DIAG has finished. 
-			*/
-			newPtrNet = netdev_priv(pAC->dev[0]);
-			if (newPtrNet == pNet) {
-				pAC->WasIfUp[0] = SK_FALSE;
-			} else {
-				pAC->WasIfUp[1] = SK_FALSE;
-			}
-			return 0; /* return to system everything is fine... */
-		} else {
-			pAC->DiagFlowCtrl = SK_FALSE;
-		}
-	}
-#endif
-
-	netif_stop_queue(dev);
-
-	if (pAC->RlmtNets == 1)
-		PortIdx = pAC->ActivePort;
-	else
-		PortIdx = pNet->NetNr;
-
-        StopDrvCleanupTimer(pAC);
-
-	/*
-	 * Clear multicast table, promiscuous mode ....
-	 */
-	SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
-	SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
-		SK_PROM_MODE_NONE);
-
-	if (pAC->MaxPorts == 1) {
-		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-		/* disable interrupts */
-		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
-		EvPara.Para32[0] = pNet->NetNr;
-		EvPara.Para32[1] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
-		SkEventDispatcher(pAC, pAC->IoBase);
-		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
-		/* stop the hardware */
-		SkGeDeInit(pAC, pAC->IoBase);
-		pAC->BoardLevel = SK_INIT_DATA;
-		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-	} else {
-
-		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-		EvPara.Para32[0] = pNet->NetNr;
-		EvPara.Para32[1] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
-		SkPnmiEvent(pAC, pAC->IoBase, SK_PNMI_EVT_XMAC_RESET, EvPara);
-		SkEventDispatcher(pAC, pAC->IoBase);
-		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-		
-		/* Stop port */
-		spin_lock_irqsave(&pAC->TxPort[pNet->PortNr]
-			[TX_PRIO_LOW].TxDesRingLock, Flags);
-		SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr,
-			SK_STOP_ALL, SK_HARD_RST);
-		spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr]
-			[TX_PRIO_LOW].TxDesRingLock, Flags);
-	}
-
-	if (pAC->RlmtNets == 1) {
-		/* clear all descriptor rings */
-		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-			ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
-			ClearRxRing(pAC, &pAC->RxPort[i]);
-			ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]);
-		}
-	} else {
-		/* clear port descriptor rings */
-		ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr], SK_TRUE);
-		ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]);
-		ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]);
-	}
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeClose: done "));
-
-	SK_MEMSET(&(pAC->PnmiBackup), 0, sizeof(SK_PNMI_STRUCT_DATA));
-	SK_MEMCPY(&(pAC->PnmiBackup), &(pAC->PnmiStruct), 
-			sizeof(SK_PNMI_STRUCT_DATA));
-
-	pAC->MaxPorts--;
-
-	return (0);
-} /* SkGeClose */
-
-
-/*****************************************************************************
- *
- * 	SkGeXmit - Linux frame transmit function
- *
- * Description:
- *	The system calls this function to send frames onto the wire.
- *	It puts the frame in the tx descriptor ring. If the ring is
- *	full then, the 'tbusy' flag is set.
- *
- * Returns:
- *	0, if everything is ok
- *	!=0, on error
- * WARNING: returning 1 in 'tbusy' case caused system crashes (double
- *	allocated skb's) !!!
- */
-static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev)
-{
-DEV_NET		*pNet;
-SK_AC		*pAC;
-int			Rc;	/* return code of XmitFrame */
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-
-	if ((!skb_shinfo(skb)->nr_frags) ||
-		(pAC->GIni.GIChipId == CHIP_ID_GENESIS)) {
-		/* Don't activate scatter-gather and hardware checksum */
-
-		if (pAC->RlmtNets == 2)
-			Rc = XmitFrame(
-				pAC,
-				&pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
-				skb);
-		else
-			Rc = XmitFrame(
-				pAC,
-				&pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
-				skb);
-	} else {
-		/* scatter-gather and hardware TCP checksumming anabled*/
-		if (pAC->RlmtNets == 2)
-			Rc = XmitFrameSG(
-				pAC,
-				&pAC->TxPort[pNet->PortNr][TX_PRIO_LOW],
-				skb);
-		else
-			Rc = XmitFrameSG(
-				pAC,
-				&pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW],
-				skb);
-	}
-
-	/* Transmitter out of resources? */
-	if (Rc <= 0) {
-		netif_stop_queue(dev);
-	}
-
-	/* If not taken, give buffer ownership back to the
-	 * queueing layer.
-	 */
-	if (Rc < 0)
-		return (1);
-
-	dev->trans_start = jiffies;
-	return (0);
-} /* SkGeXmit */
-
-
-/*****************************************************************************
- *
- * 	XmitFrame - fill one socket buffer into the transmit ring
- *
- * Description:
- *	This function puts a message into the transmit descriptor ring
- *	if there is a descriptors left.
- *	Linux skb's consist of only one continuous buffer.
- *	The first step locks the ring. It is held locked
- *	all time to avoid problems with SWITCH_../PORT_RESET.
- *	Then the descriptoris allocated.
- *	The second part is linking the buffer to the descriptor.
- *	At the very last, the Control field of the descriptor
- *	is made valid for the BMU and a start TX command is given
- *	if necessary.
- *
- * Returns:
- *	> 0 - on succes: the number of bytes in the message
- *	= 0 - on resource shortage: this frame sent or dropped, now
- *		the ring is full ( -> set tbusy)
- *	< 0 - on failure: other problems ( -> return failure to upper layers)
- */
-static int XmitFrame(
-SK_AC 		*pAC,		/* pointer to adapter context           */
-TX_PORT		*pTxPort,	/* pointer to struct of port to send to */
-struct sk_buff	*pMessage)	/* pointer to send-message              */
-{
-	TXD		*pTxd;		/* the rxd to fill */
-	TXD		*pOldTxd;
-	unsigned long	 Flags;
-	SK_U64		 PhysAddr;
-	int		 BytesSend = pMessage->len;
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X"));
-
-	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
-#ifndef USE_TX_COMPLETE
-	FreeTxDescriptors(pAC, pTxPort);
-#endif
-	if (pTxPort->TxdRingFree == 0) {
-		/* 
-		** no enough free descriptors in ring at the moment.
-		** Maybe free'ing some old one help?
-		*/
-		FreeTxDescriptors(pAC, pTxPort);
-		if (pTxPort->TxdRingFree == 0) {
-			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
-			SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_TX_PROGRESS,
-				("XmitFrame failed\n"));
-			/* 
-			** the desired message can not be sent
-			** Because tbusy seems to be set, the message 
-			** should not be freed here. It will be used 
-			** by the scheduler of the ethernet handler 
-			*/
-			return (-1);
-		}
-	}
-
-	/*
-	** If the passed socket buffer is of smaller MTU-size than 60,
-	** copy everything into new buffer and fill all bytes between
-	** the original packet end and the new packet end of 60 with 0x00.
-	** This is to resolve faulty padding by the HW with 0xaa bytes.
-	*/
-	if (BytesSend < C_LEN_ETHERNET_MINSIZE) {
-		if (skb_padto(pMessage, C_LEN_ETHERNET_MINSIZE)) {
-			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
-			return 0;
-		}
-		pMessage->len = C_LEN_ETHERNET_MINSIZE;
-	}
-
-	/* 
-	** advance head counter behind descriptor needed for this frame, 
-	** so that needed descriptor is reserved from that on. The next
-	** action will be to add the passed buffer to the TX-descriptor
-	*/
-	pTxd = pTxPort->pTxdRingHead;
-	pTxPort->pTxdRingHead = pTxd->pNextTxd;
-	pTxPort->TxdRingFree--;
-
-#ifdef SK_DUMP_TX
-	DumpMsg(pMessage, "XmitFrame");
-#endif
-
-	/* 
-	** First step is to map the data to be sent via the adapter onto
-	** the DMA memory. Kernel 2.2 uses virt_to_bus(), but kernels 2.4
-	** and 2.6 need to use pci_map_page() for that mapping.
-	*/
-	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
-					virt_to_page(pMessage->data),
-					((unsigned long) pMessage->data & ~PAGE_MASK),
-					pMessage->len,
-					PCI_DMA_TODEVICE);
-	pTxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
-	pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
-	pTxd->pMBuf     = pMessage;
-
-	if (pMessage->ip_summed == CHECKSUM_PARTIAL) {
-		u16 hdrlen = skb_transport_offset(pMessage);
-		u16 offset = hdrlen + pMessage->csum_offset;
-
-		if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) &&
-			(pAC->GIni.GIChipRev == 0) &&
-			(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
-			pTxd->TBControl = BMU_TCP_CHECK;
-		} else {
-			pTxd->TBControl = BMU_UDP_CHECK;
-		}
-
-		pTxd->TcpSumOfs = 0;
-		pTxd->TcpSumSt  = hdrlen;
-		pTxd->TcpSumWr  = offset;
-
-		pTxd->TBControl |= BMU_OWN | BMU_STF | 
-				   BMU_SW  | BMU_EOF |
-#ifdef USE_TX_COMPLETE
-				   BMU_IRQ_EOF |
-#endif
-				   pMessage->len;
-        } else {
-		pTxd->TBControl = BMU_OWN | BMU_STF | BMU_CHECK | 
-				  BMU_SW  | BMU_EOF |
-#ifdef USE_TX_COMPLETE
-				   BMU_IRQ_EOF |
-#endif
-			pMessage->len;
-	}
-
-	/* 
-	** If previous descriptor already done, give TX start cmd 
-	*/
-	pOldTxd = xchg(&pTxPort->pTxdRingPrev, pTxd);
-	if ((pOldTxd->TBControl & BMU_OWN) == 0) {
-		SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START);
-	}	
-
-	/* 
-	** after releasing the lock, the skb may immediately be free'd 
-	*/
-	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
-	if (pTxPort->TxdRingFree != 0) {
-		return (BytesSend);
-	} else {
-		return (0);
-	}
-
-} /* XmitFrame */
-
-/*****************************************************************************
- *
- * 	XmitFrameSG - fill one socket buffer into the transmit ring
- *                (use SG and TCP/UDP hardware checksumming)
- *
- * Description:
- *	This function puts a message into the transmit descriptor ring
- *	if there is a descriptors left.
- *
- * Returns:
- *	> 0 - on succes: the number of bytes in the message
- *	= 0 - on resource shortage: this frame sent or dropped, now
- *		the ring is full ( -> set tbusy)
- *	< 0 - on failure: other problems ( -> return failure to upper layers)
- */
-static int XmitFrameSG(
-SK_AC 		*pAC,		/* pointer to adapter context           */
-TX_PORT		*pTxPort,	/* pointer to struct of port to send to */
-struct sk_buff	*pMessage)	/* pointer to send-message              */
-{
-
-	TXD		*pTxd;
-	TXD		*pTxdFst;
-	TXD		*pTxdLst;
-	int 	 	 CurrFrag;
-	int		 BytesSend;
-	skb_frag_t	*sk_frag;
-	SK_U64		 PhysAddr;
-	unsigned long	 Flags;
-	SK_U32		 Control;
-
-	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
-#ifndef USE_TX_COMPLETE
-	FreeTxDescriptors(pAC, pTxPort);
-#endif
-	if ((skb_shinfo(pMessage)->nr_frags +1) > pTxPort->TxdRingFree) {
-		FreeTxDescriptors(pAC, pTxPort);
-		if ((skb_shinfo(pMessage)->nr_frags + 1) > pTxPort->TxdRingFree) {
-			spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
-			SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex);
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_TX_PROGRESS,
-				("XmitFrameSG failed - Ring full\n"));
-				/* this message can not be sent now */
-			return(-1);
-		}
-	}
-
-	pTxd      = pTxPort->pTxdRingHead;
-	pTxdFst   = pTxd;
-	pTxdLst   = pTxd;
-	BytesSend = 0;
-
-	/* 
-	** Map the first fragment (header) into the DMA-space
-	*/
-	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
-			virt_to_page(pMessage->data),
-			((unsigned long) pMessage->data & ~PAGE_MASK),
-			skb_headlen(pMessage),
-			PCI_DMA_TODEVICE);
-
-	pTxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
-	pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
-
-	/* 
-	** Does the HW need to evaluate checksum for TCP or UDP packets? 
-	*/
-	if (pMessage->ip_summed == CHECKSUM_PARTIAL) {
-		u16 hdrlen = skb_transport_offset(pMessage);
-		u16 offset = hdrlen + pMessage->csum_offset;
-
-		Control = BMU_STFWD;
-
-		/* 
-		** We have to use the opcode for tcp here,  because the
-		** opcode for udp is not working in the hardware yet 
-		** (Revision 2.0)
-		*/
-		if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) &&
-			(pAC->GIni.GIChipRev == 0) &&
-			(pAC->GIni.GIChipId == CHIP_ID_YUKON)) {
-			Control |= BMU_TCP_CHECK;
-		} else {
-			Control |= BMU_UDP_CHECK;
-		}
-
-		pTxd->TcpSumOfs = 0;
-		pTxd->TcpSumSt  = hdrlen;
-		pTxd->TcpSumWr  = offset;
-	} else
-		Control = BMU_CHECK | BMU_SW;
-
-	pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage);
-
-	pTxd = pTxd->pNextTxd;
-	pTxPort->TxdRingFree--;
-	BytesSend += skb_headlen(pMessage);
-
-	/* 
-	** Browse over all SG fragments and map each of them into the DMA space
-	*/
-	for (CurrFrag = 0; CurrFrag < skb_shinfo(pMessage)->nr_frags; CurrFrag++) {
-		sk_frag = &skb_shinfo(pMessage)->frags[CurrFrag];
-		/* 
-		** we already have the proper value in entry
-		*/
-		PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
-						 sk_frag->page,
-						 sk_frag->page_offset,
-						 sk_frag->size,
-						 PCI_DMA_TODEVICE);
-
-		pTxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
-		pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
-		pTxd->pMBuf     = pMessage;
-		
-		pTxd->TBControl = Control | BMU_OWN | sk_frag->size;
-
-		/* 
-		** Do we have the last fragment? 
-		*/
-		if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags )  {
-#ifdef USE_TX_COMPLETE
-			pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF;
-#else
-			pTxd->TBControl |= BMU_EOF;
-#endif
-			pTxdFst->TBControl |= BMU_OWN | BMU_SW;
-		}
-		pTxdLst = pTxd;
-		pTxd    = pTxd->pNextTxd;
-		pTxPort->TxdRingFree--;
-		BytesSend += sk_frag->size;
-	}
-
-	/* 
-	** If previous descriptor already done, give TX start cmd 
-	*/
-	if ((pTxPort->pTxdRingPrev->TBControl & BMU_OWN) == 0) {
-		SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START);
-	}
-
-	pTxPort->pTxdRingPrev = pTxdLst;
-	pTxPort->pTxdRingHead = pTxd;
-
-	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
-
-	if (pTxPort->TxdRingFree > 0) {
-		return (BytesSend);
-	} else {
-		return (0);
-	}
-}
-
-/*****************************************************************************
- *
- * 	FreeTxDescriptors - release descriptors from the descriptor ring
- *
- * Description:
- *	This function releases descriptors from a transmit ring if they
- *	have been sent by the BMU.
- *	If a descriptors is sent, it can be freed and the message can
- *	be freed, too.
- *	The SOFTWARE controllable bit is used to prevent running around a
- *	completely free ring for ever. If this bit is no set in the
- *	frame (by XmitFrame), this frame has never been sent or is
- *	already freed.
- *	The Tx descriptor ring lock must be held while calling this function !!!
- *
- * Returns:
- *	none
- */
-static void FreeTxDescriptors(
-SK_AC	*pAC,		/* pointer to the adapter context */
-TX_PORT	*pTxPort)	/* pointer to destination port structure */
-{
-TXD	*pTxd;		/* pointer to the checked descriptor */
-TXD	*pNewTail;	/* pointer to 'end' of the ring */
-SK_U32	Control;	/* TBControl field of descriptor */
-SK_U64	PhysAddr;	/* address of DMA mapping */
-
-	pNewTail = pTxPort->pTxdRingTail;
-	pTxd     = pNewTail;
-	/*
-	** loop forever; exits if BMU_SW bit not set in start frame
-	** or BMU_OWN bit set in any frame
-	*/
-	while (1) {
-		Control = pTxd->TBControl;
-		if ((Control & BMU_SW) == 0) {
-			/*
-			** software controllable bit is set in first
-			** fragment when given to BMU. Not set means that
-			** this fragment was never sent or is already
-			** freed ( -> ring completely free now).
-			*/
-			pTxPort->pTxdRingTail = pTxd;
-			netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
-			return;
-		}
-		if (Control & BMU_OWN) {
-			pTxPort->pTxdRingTail = pTxd;
-			if (pTxPort->TxdRingFree > 0) {
-				netif_wake_queue(pAC->dev[pTxPort->PortIndex]);
-			}
-			return;
-		}
-		
-		/* 
-		** release the DMA mapping, because until not unmapped
-		** this buffer is considered being under control of the
-		** adapter card!
-		*/
-		PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32;
-		PhysAddr |= (SK_U64) pTxd->VDataLow;
-		pci_unmap_page(pAC->PciDev, PhysAddr,
-				 pTxd->pMBuf->len,
-				 PCI_DMA_TODEVICE);
-
-		if (Control & BMU_EOF)
-			DEV_KFREE_SKB_ANY(pTxd->pMBuf);	/* free message */
-
-		pTxPort->TxdRingFree++;
-		pTxd->TBControl &= ~BMU_SW;
-		pTxd = pTxd->pNextTxd; /* point behind fragment with EOF */
-	} /* while(forever) */
-} /* FreeTxDescriptors */
-
-/*****************************************************************************
- *
- * 	FillRxRing - fill the receive ring with valid descriptors
- *
- * Description:
- *	This function fills the receive ring descriptors with data
- *	segments and makes them valid for the BMU.
- *	The active ring is filled completely, if possible.
- *	The non-active ring is filled only partial to save memory.
- *
- * Description of rx ring structure:
- *	head - points to the descriptor which will be used next by the BMU
- *	tail - points to the next descriptor to give to the BMU
- *	
- * Returns:	N/A
- */
-static void FillRxRing(
-SK_AC		*pAC,		/* pointer to the adapter context */
-RX_PORT		*pRxPort)	/* ptr to port struct for which the ring
-				   should be filled */
-{
-unsigned long	Flags;
-
-	spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
-	while (pRxPort->RxdRingFree > pRxPort->RxFillLimit) {
-		if(!FillRxDescriptor(pAC, pRxPort))
-			break;
-	}
-	spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
-} /* FillRxRing */
-
-
-/*****************************************************************************
- *
- * 	FillRxDescriptor - fill one buffer into the receive ring
- *
- * Description:
- *	The function allocates a new receive buffer and
- *	puts it into the next descriptor.
- *
- * Returns:
- *	SK_TRUE - a buffer was added to the ring
- *	SK_FALSE - a buffer could not be added
- */
-static SK_BOOL FillRxDescriptor(
-SK_AC		*pAC,		/* pointer to the adapter context struct */
-RX_PORT		*pRxPort)	/* ptr to port struct of ring to fill */
-{
-struct sk_buff	*pMsgBlock;	/* pointer to a new message block */
-RXD		*pRxd;		/* the rxd to fill */
-SK_U16		Length;		/* data fragment length */
-SK_U64		PhysAddr;	/* physical address of a rx buffer */
-
-	pMsgBlock = alloc_skb(pAC->RxBufSize, GFP_ATOMIC);
-	if (pMsgBlock == NULL) {
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-			SK_DBGCAT_DRV_ENTRY,
-			("%s: Allocation of rx buffer failed !\n",
-			pAC->dev[pRxPort->PortIndex]->name));
-		SK_PNMI_CNT_NO_RX_BUF(pAC, pRxPort->PortIndex);
-		return(SK_FALSE);
-	}
-	skb_reserve(pMsgBlock, 2); /* to align IP frames */
-	/* skb allocated ok, so add buffer */
-	pRxd = pRxPort->pRxdRingTail;
-	pRxPort->pRxdRingTail = pRxd->pNextRxd;
-	pRxPort->RxdRingFree--;
-	Length = pAC->RxBufSize;
-	PhysAddr = (SK_U64) pci_map_page(pAC->PciDev,
-		virt_to_page(pMsgBlock->data),
-		((unsigned long) pMsgBlock->data &
-		~PAGE_MASK),
-		pAC->RxBufSize - 2,
-		PCI_DMA_FROMDEVICE);
-
-	pRxd->VDataLow  = (SK_U32) (PhysAddr & 0xffffffff);
-	pRxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
-	pRxd->pMBuf     = pMsgBlock;
-	pRxd->RBControl = BMU_OWN       | 
-			  BMU_STF       | 
-			  BMU_IRQ_EOF   | 
-			  BMU_TCP_CHECK | 
-			  Length;
-	return (SK_TRUE);
-
-} /* FillRxDescriptor */
-
-
-/*****************************************************************************
- *
- * 	ReQueueRxBuffer - fill one buffer back into the receive ring
- *
- * Description:
- *	Fill a given buffer back into the rx ring. The buffer
- *	has been previously allocated and aligned, and its phys.
- *	address calculated, so this is no more necessary.
- *
- * Returns: N/A
- */
-static void ReQueueRxBuffer(
-SK_AC		*pAC,		/* pointer to the adapter context struct */
-RX_PORT		*pRxPort,	/* ptr to port struct of ring to fill */
-struct sk_buff	*pMsg,		/* pointer to the buffer */
-SK_U32		PhysHigh,	/* phys address high dword */
-SK_U32		PhysLow)	/* phys address low dword */
-{
-RXD		*pRxd;		/* the rxd to fill */
-SK_U16		Length;		/* data fragment length */
-
-	pRxd = pRxPort->pRxdRingTail;
-	pRxPort->pRxdRingTail = pRxd->pNextRxd;
-	pRxPort->RxdRingFree--;
-	Length = pAC->RxBufSize;
-
-	pRxd->VDataLow  = PhysLow;
-	pRxd->VDataHigh = PhysHigh;
-	pRxd->pMBuf     = pMsg;
-	pRxd->RBControl = BMU_OWN       | 
-			  BMU_STF       |
-			  BMU_IRQ_EOF   | 
-			  BMU_TCP_CHECK | 
-			  Length;
-	return;
-} /* ReQueueRxBuffer */
-
-/*****************************************************************************
- *
- * 	ReceiveIrq - handle a receive IRQ
- *
- * Description:
- *	This function is called when a receive IRQ is set.
- *	It walks the receive descriptor ring and sends up all
- *	frames that are complete.
- *
- * Returns:	N/A
- */
-static void ReceiveIrq(
-	SK_AC		*pAC,			/* pointer to adapter context */
-	RX_PORT		*pRxPort,		/* pointer to receive port struct */
-	SK_BOOL		SlowPathLock)	/* indicates if SlowPathLock is needed */
-{
-RXD				*pRxd;			/* pointer to receive descriptors */
-SK_U32			Control;		/* control field of descriptor */
-struct sk_buff	*pMsg;			/* pointer to message holding frame */
-struct sk_buff	*pNewMsg;		/* pointer to a new message for copying frame */
-int				FrameLength;	/* total length of received frame */
-SK_MBUF			*pRlmtMbuf;		/* ptr to a buffer for giving a frame to rlmt */
-SK_EVPARA		EvPara;			/* an event parameter union */	
-unsigned long	Flags;			/* for spin lock */
-int				PortIndex = pRxPort->PortIndex;
-unsigned int	Offset;
-unsigned int	NumBytes;
-unsigned int	ForRlmt;
-SK_BOOL			IsBc;
-SK_BOOL			IsMc;
-SK_BOOL  IsBadFrame; 			/* Bad frame */
-
-SK_U32			FrameStat;
-SK_U64			PhysAddr;
-
-rx_start:	
-	/* do forever; exit if BMU_OWN found */
-	for ( pRxd = pRxPort->pRxdRingHead ;
-		  pRxPort->RxdRingFree < pAC->RxDescrPerRing ;
-		  pRxd = pRxd->pNextRxd,
-		  pRxPort->pRxdRingHead = pRxd,
-		  pRxPort->RxdRingFree ++) {
-
-		/*
-		 * For a better understanding of this loop
-		 * Go through every descriptor beginning at the head
-		 * Please note: the ring might be completely received so the OWN bit
-		 * set is not a good crirteria to leave that loop.
-		 * Therefore the RingFree counter is used.
-		 * On entry of this loop pRxd is a pointer to the Rxd that needs
-		 * to be checked next.
-		 */
-
-		Control = pRxd->RBControl;
-	
-		/* check if this descriptor is ready */
-		if ((Control & BMU_OWN) != 0) {
-			/* this descriptor is not yet ready */
-			/* This is the usual end of the loop */
-			/* We don't need to start the ring again */
-			FillRxRing(pAC, pRxPort);
-			return;
-		}
-                pAC->DynIrqModInfo.NbrProcessedDescr++;
-
-		/* get length of frame and check it */
-		FrameLength = Control & BMU_BBC;
-		if (FrameLength > pAC->RxBufSize) {
-			goto rx_failed;
-		}
-
-		/* check for STF and EOF */
-		if ((Control & (BMU_STF | BMU_EOF)) != (BMU_STF | BMU_EOF)) {
-			goto rx_failed;
-		}
-
-		/* here we have a complete frame in the ring */
-		pMsg = pRxd->pMBuf;
-
-		FrameStat = pRxd->FrameStat;
-
-		/* check for frame length mismatch */
-#define XMR_FS_LEN_SHIFT        18
-#define GMR_FS_LEN_SHIFT        16
-		if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
-			if (FrameLength != (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)) {
-				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-					SK_DBGCAT_DRV_RX_PROGRESS,
-					("skge: Frame length mismatch (%u/%u).\n",
-					FrameLength,
-					(SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
-				goto rx_failed;
-			}
-		}
-		else {
-			if (FrameLength != (SK_U32) (FrameStat >> GMR_FS_LEN_SHIFT)) {
-				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-					SK_DBGCAT_DRV_RX_PROGRESS,
-					("skge: Frame length mismatch (%u/%u).\n",
-					FrameLength,
-					(SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)));
-				goto rx_failed;
-			}
-		}
-
-		/* Set Rx Status */
-		if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
-			IsBc = (FrameStat & XMR_FS_BC) != 0;
-			IsMc = (FrameStat & XMR_FS_MC) != 0;
-			IsBadFrame = (FrameStat &
-				(XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0;
-		} else {
-			IsBc = (FrameStat & GMR_FS_BC) != 0;
-			IsMc = (FrameStat & GMR_FS_MC) != 0;
-			IsBadFrame = (((FrameStat & GMR_FS_ANY_ERR) != 0) ||
-							((FrameStat & GMR_FS_RX_OK) == 0));
-		}
-
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
-			("Received frame of length %d on port %d\n",
-			FrameLength, PortIndex));
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0,
-			("Number of free rx descriptors: %d\n",
-			pRxPort->RxdRingFree));
-/* DumpMsg(pMsg, "Rx");	*/
-
-		if ((Control & BMU_STAT_VAL) != BMU_STAT_VAL || (IsBadFrame)) {
-#if 0
-			(FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0) {
-#endif
-			/* there is a receive error in this frame */
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_RX_PROGRESS,
-				("skge: Error in received frame, dropped!\n"
-				"Control: %x\nRxStat: %x\n",
-				Control, FrameStat));
-
-			ReQueueRxBuffer(pAC, pRxPort, pMsg,
-				pRxd->VDataHigh, pRxd->VDataLow);
-
-			continue;
-		}
-
-		/*
-		 * if short frame then copy data to reduce memory waste
-		 */
-		if ((FrameLength < SK_COPY_THRESHOLD) &&
-			((pNewMsg = alloc_skb(FrameLength+2, GFP_ATOMIC)) != NULL)) {
-			/*
-			 * Short frame detected and allocation successfull
-			 */
-			/* use new skb and copy data */
-			skb_reserve(pNewMsg, 2);
-			skb_put(pNewMsg, FrameLength);
-			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
-			PhysAddr |= (SK_U64) pRxd->VDataLow;
-
-			pci_dma_sync_single_for_cpu(pAC->PciDev,
-						    (dma_addr_t) PhysAddr,
-						    FrameLength,
-						    PCI_DMA_FROMDEVICE);
-			skb_copy_to_linear_data(pNewMsg, pMsg, FrameLength);
-
-			pci_dma_sync_single_for_device(pAC->PciDev,
-						       (dma_addr_t) PhysAddr,
-						       FrameLength,
-						       PCI_DMA_FROMDEVICE);
-			ReQueueRxBuffer(pAC, pRxPort, pMsg,
-				pRxd->VDataHigh, pRxd->VDataLow);
-
-			pMsg = pNewMsg;
-
-		}
-		else {
-			/*
-			 * if large frame, or SKB allocation failed, pass
-			 * the SKB directly to the networking
-			 */
-
-			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
-			PhysAddr |= (SK_U64) pRxd->VDataLow;
-
-			/* release the DMA mapping */
-			pci_unmap_single(pAC->PciDev,
-					 PhysAddr,
-					 pAC->RxBufSize - 2,
-					 PCI_DMA_FROMDEVICE);
-
-			/* set length in message */
-			skb_put(pMsg, FrameLength);
-		} /* frame > SK_COPY_TRESHOLD */
-
-#ifdef USE_SK_RX_CHECKSUM
-		pMsg->csum = pRxd->TcpSums & 0xffff;
-		pMsg->ip_summed = CHECKSUM_COMPLETE;
-#else
-		pMsg->ip_summed = CHECKSUM_NONE;
-#endif
-
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV,	1,("V"));
-		ForRlmt = SK_RLMT_RX_PROTOCOL;
-#if 0
-		IsBc = (FrameStat & XMR_FS_BC)==XMR_FS_BC;
-#endif
-		SK_RLMT_PRE_LOOKAHEAD(pAC, PortIndex, FrameLength,
-			IsBc, &Offset, &NumBytes);
-		if (NumBytes != 0) {
-#if 0
-			IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC;
-#endif
-			SK_RLMT_LOOKAHEAD(pAC, PortIndex,
-				&pMsg->data[Offset],
-				IsBc, IsMc, &ForRlmt);
-		}
-		if (ForRlmt == SK_RLMT_RX_PROTOCOL) {
-					SK_DBG_MSG(NULL, SK_DBGMOD_DRV,	1,("W"));
-			/* send up only frames from active port */
-			if ((PortIndex == pAC->ActivePort) ||
-				(pAC->RlmtNets == 2)) {
-				/* frame for upper layer */
-				SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("U"));
-#ifdef xDEBUG
-				DumpMsg(pMsg, "Rx");
-#endif
-				SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,
-					FrameLength, pRxPort->PortIndex);
-
-				pMsg->protocol = eth_type_trans(pMsg,
-					pAC->dev[pRxPort->PortIndex]);
-				netif_rx(pMsg);
-				pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
-			}
-			else {
-				/* drop frame */
-				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-					SK_DBGCAT_DRV_RX_PROGRESS,
-					("D"));
-				DEV_KFREE_SKB(pMsg);
-			}
-			
-		} /* if not for rlmt */
-		else {
-			/* packet for rlmt */
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-				SK_DBGCAT_DRV_RX_PROGRESS, ("R"));
-			pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC,
-				pAC->IoBase, FrameLength);
-			if (pRlmtMbuf != NULL) {
-				pRlmtMbuf->pNext = NULL;
-				pRlmtMbuf->Length = FrameLength;
-				pRlmtMbuf->PortIdx = PortIndex;
-				EvPara.pParaPtr = pRlmtMbuf;
-				memcpy((char*)(pRlmtMbuf->pData),
-					   (char*)(pMsg->data),
-					   FrameLength);
-
-				/* SlowPathLock needed? */
-				if (SlowPathLock == SK_TRUE) {
-					spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-					SkEventQueue(pAC, SKGE_RLMT,
-						SK_RLMT_PACKET_RECEIVED,
-						EvPara);
-					pAC->CheckQueue = SK_TRUE;
-					spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-				} else {
-					SkEventQueue(pAC, SKGE_RLMT,
-						SK_RLMT_PACKET_RECEIVED,
-						EvPara);
-					pAC->CheckQueue = SK_TRUE;
-				}
-
-				SK_DBG_MSG(NULL, SK_DBGMOD_DRV,
-					SK_DBGCAT_DRV_RX_PROGRESS,
-					("Q"));
-			}
-			if ((pAC->dev[pRxPort->PortIndex]->flags &
-				(IFF_PROMISC | IFF_ALLMULTI)) != 0 ||
-				(ForRlmt & SK_RLMT_RX_PROTOCOL) ==
-				SK_RLMT_RX_PROTOCOL) {
-				pMsg->protocol = eth_type_trans(pMsg,
-					pAC->dev[pRxPort->PortIndex]);
-				netif_rx(pMsg);
-				pAC->dev[pRxPort->PortIndex]->last_rx = jiffies;
-			}
-			else {
-				DEV_KFREE_SKB(pMsg);
-			}
-
-		} /* if packet for rlmt */
-	} /* for ... scanning the RXD ring */
-
-	/* RXD ring is empty -> fill and restart */
-	FillRxRing(pAC, pRxPort);
-	/* do not start if called from Close */
-	if (pAC->BoardLevel > SK_INIT_DATA) {
-		ClearAndStartRx(pAC, PortIndex);
-	}
-	return;
-
-rx_failed:
-	/* remove error frame */
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
-		("Schrottdescriptor, length: 0x%x\n", FrameLength));
-
-	/* release the DMA mapping */
-
-	PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
-	PhysAddr |= (SK_U64) pRxd->VDataLow;
-	pci_unmap_page(pAC->PciDev,
-			 PhysAddr,
-			 pAC->RxBufSize - 2,
-			 PCI_DMA_FROMDEVICE);
-	DEV_KFREE_SKB_IRQ(pRxd->pMBuf);
-	pRxd->pMBuf = NULL;
-	pRxPort->RxdRingFree++;
-	pRxPort->pRxdRingHead = pRxd->pNextRxd;
-	goto rx_start;
-
-} /* ReceiveIrq */
-
-
-/*****************************************************************************
- *
- * 	ClearAndStartRx - give a start receive command to BMU, clear IRQ
- *
- * Description:
- *	This function sends a start command and a clear interrupt
- *	command for one receive queue to the BMU.
- *
- * Returns: N/A
- *	none
- */
-static void ClearAndStartRx(
-SK_AC	*pAC,		/* pointer to the adapter context */
-int	PortIndex)	/* index of the receive port (XMAC) */
-{
-	SK_OUT8(pAC->IoBase,
-		RxQueueAddr[PortIndex]+Q_CSR,
-		CSR_START | CSR_IRQ_CL_F);
-} /* ClearAndStartRx */
-
-
-/*****************************************************************************
- *
- * 	ClearTxIrq - give a clear transmit IRQ command to BMU
- *
- * Description:
- *	This function sends a clear tx IRQ command for one
- *	transmit queue to the BMU.
- *
- * Returns: N/A
- */
-static void ClearTxIrq(
-SK_AC	*pAC,		/* pointer to the adapter context */
-int	PortIndex,	/* index of the transmit port (XMAC) */
-int	Prio)		/* priority or normal queue */
-{
-	SK_OUT8(pAC->IoBase, 
-		TxQueueAddr[PortIndex][Prio]+Q_CSR,
-		CSR_IRQ_CL_F);
-} /* ClearTxIrq */
-
-
-/*****************************************************************************
- *
- * 	ClearRxRing - remove all buffers from the receive ring
- *
- * Description:
- *	This function removes all receive buffers from the ring.
- *	The receive BMU must be stopped before calling this function.
- *
- * Returns: N/A
- */
-static void ClearRxRing(
-SK_AC	*pAC,		/* pointer to adapter context */
-RX_PORT	*pRxPort)	/* pointer to rx port struct */
-{
-RXD		*pRxd;	/* pointer to the current descriptor */
-unsigned long	Flags;
-SK_U64		PhysAddr;
-
-	if (pRxPort->RxdRingFree == pAC->RxDescrPerRing) {
-		return;
-	}
-	spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags);
-	pRxd = pRxPort->pRxdRingHead;
-	do {
-		if (pRxd->pMBuf != NULL) {
-
-			PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32;
-			PhysAddr |= (SK_U64) pRxd->VDataLow;
-			pci_unmap_page(pAC->PciDev,
-					 PhysAddr,
-					 pAC->RxBufSize - 2,
-					 PCI_DMA_FROMDEVICE);
-			DEV_KFREE_SKB(pRxd->pMBuf);
-			pRxd->pMBuf = NULL;
-		}
-		pRxd->RBControl &= BMU_OWN;
-		pRxd = pRxd->pNextRxd;
-		pRxPort->RxdRingFree++;
-	} while (pRxd != pRxPort->pRxdRingTail);
-	pRxPort->pRxdRingTail = pRxPort->pRxdRingHead;
-	spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags);
-} /* ClearRxRing */
-
-/*****************************************************************************
- *
- *	ClearTxRing - remove all buffers from the transmit ring
- *
- * Description:
- *	This function removes all transmit buffers from the ring.
- *	The transmit BMU must be stopped before calling this function
- *	and transmitting at the upper level must be disabled.
- *	The BMU own bit of all descriptors is cleared, the rest is
- *	done by calling FreeTxDescriptors.
- *
- * Returns: N/A
- */
-static void ClearTxRing(
-SK_AC	*pAC,		/* pointer to adapter context */
-TX_PORT	*pTxPort)	/* pointer to tx prt struct */
-{
-TXD		*pTxd;		/* pointer to the current descriptor */
-int		i;
-unsigned long	Flags;
-
-	spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags);
-	pTxd = pTxPort->pTxdRingHead;
-	for (i=0; i<pAC->TxDescrPerRing; i++) {
-		pTxd->TBControl &= ~BMU_OWN;
-		pTxd = pTxd->pNextTxd;
-	}
-	FreeTxDescriptors(pAC, pTxPort);
-	spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags);
-} /* ClearTxRing */
-
-/*****************************************************************************
- *
- * 	SkGeSetMacAddr - Set the hardware MAC address
- *
- * Description:
- *	This function sets the MAC address used by the adapter.
- *
- * Returns:
- *	0, if everything is ok
- *	!=0, on error
- */
-static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p)
-{
-
-DEV_NET *pNet = netdev_priv(dev);
-SK_AC	*pAC = pNet->pAC;
-
-struct sockaddr	*addr = p;
-unsigned long	Flags;
-	
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeSetMacAddr starts now...\n"));
-	if(netif_running(dev))
-		return -EBUSY;
-
-	memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
-	
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-
-	if (pAC->RlmtNets == 2)
-		SkAddrOverride(pAC, pAC->IoBase, pNet->NetNr,
-			(SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);
-	else
-		SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort,
-			(SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS);
-
-	
-	
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-	return 0;
-} /* SkGeSetMacAddr */
-
-
-/*****************************************************************************
- *
- * 	SkGeSetRxMode - set receive mode
- *
- * Description:
- *	This function sets the receive mode of an adapter. The adapter
- *	supports promiscuous mode, allmulticast mode and a number of
- *	multicast addresses. If more multicast addresses the available
- *	are selected, a hash function in the hardware is used.
- *
- * Returns:
- *	0, if everything is ok
- *	!=0, on error
- */
-static void SkGeSetRxMode(struct SK_NET_DEVICE *dev)
-{
-
-DEV_NET		*pNet;
-SK_AC		*pAC;
-
-struct dev_mc_list	*pMcList;
-int			i;
-int			PortIdx;
-unsigned long		Flags;
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeSetRxMode starts now... "));
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-	if (pAC->RlmtNets == 1)
-		PortIdx = pAC->ActivePort;
-	else
-		PortIdx = pNet->NetNr;
-
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-	if (dev->flags & IFF_PROMISC) {
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-			("PROMISCUOUS mode\n"));
-		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
-			SK_PROM_MODE_LLC);
-	} else if (dev->flags & IFF_ALLMULTI) {
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-			("ALLMULTI mode\n"));
-		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
-			SK_PROM_MODE_ALL_MC);
-	} else {
-		SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx,
-			SK_PROM_MODE_NONE);
-		SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0);
-
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-			("Number of MC entries: %d ", dev->mc_count));
-		
-		pMcList = dev->mc_list;
-		for (i=0; i<dev->mc_count; i++, pMcList = pMcList->next) {
-			SkAddrMcAdd(pAC, pAC->IoBase, PortIdx,
-				(SK_MAC_ADDR*)pMcList->dmi_addr, 0);
-			SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_MCA,
-				("%02x:%02x:%02x:%02x:%02x:%02x\n",
-				pMcList->dmi_addr[0],
-				pMcList->dmi_addr[1],
-				pMcList->dmi_addr[2],
-				pMcList->dmi_addr[3],
-				pMcList->dmi_addr[4],
-				pMcList->dmi_addr[5]));
-		}
-		SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx);
-	}
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-	
-	return;
-} /* SkGeSetRxMode */
-
-
-/*****************************************************************************
- *
- * 	SkGeChangeMtu - set the MTU to another value
- *
- * Description:
- *	This function sets is called whenever the MTU size is changed
- *	(ifconfig mtu xxx dev ethX). If the MTU is bigger than standard
- *	ethernet MTU size, long frame support is activated.
- *
- * Returns:
- *	0, if everything is ok
- *	!=0, on error
- */
-static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu)
-{
-DEV_NET		*pNet;
-struct net_device *pOtherDev;
-SK_AC		*pAC;
-unsigned long	Flags;
-int		i;
-SK_EVPARA 	EvPara;
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeChangeMtu starts now...\n"));
-
-	pNet = netdev_priv(dev);
-	pAC  = pNet->pAC;
-
-	if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) {
-		return -EINVAL;
-	}
-
-	if(pAC->BoardLevel != SK_INIT_RUN) {
-		return -EINVAL;
-	}
-
-#ifdef SK_DIAG_SUPPORT
-	if (pAC->DiagModeActive == DIAG_ACTIVE) {
-		if (pAC->DiagFlowCtrl == SK_FALSE) {
-			return -1; /* still in use, deny any actions of MTU */
-		} else {
-			pAC->DiagFlowCtrl = SK_FALSE;
-		}
-	}
-#endif
-
-	pOtherDev = pAC->dev[1 - pNet->NetNr];
-
-	if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500)
-	     && (NewMtu <= 1500))
-		return 0;
-
-	pAC->RxBufSize = NewMtu + 32;
-	dev->mtu = NewMtu;
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("New MTU: %d\n", NewMtu));
-
-	/* 
-	** Prevent any reconfiguration while changing the MTU 
-	** by disabling any interrupts 
-	*/
-	SK_OUT32(pAC->IoBase, B0_IMSK, 0);
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-
-	/* 
-	** Notify RLMT that any ports are to be stopped
-	*/
-	EvPara.Para32[0] =  0;
-	EvPara.Para32[1] = -1;
-	if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
-		EvPara.Para32[0] =  1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
-	} else {
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
-	}
-
-	/*
-	** After calling the SkEventDispatcher(), RLMT is aware about
-	** the stopped ports -> configuration can take place!
-	*/
-	SkEventDispatcher(pAC, pAC->IoBase);
-
-	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-		spin_lock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock);
-		netif_stop_queue(pAC->dev[i]);
-
-	}
-
-	/*
-	** Depending on the desired MTU size change, a different number of 
-	** RX buffers need to be allocated
-	*/
-	if (NewMtu > 1500) {
-	    /* 
-	    ** Use less rx buffers 
-	    */
-	    for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-		if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
-		    pAC->RxPort[i].RxFillLimit =  pAC->RxDescrPerRing -
-						 (pAC->RxDescrPerRing / 4);
-		} else {
-		    if (i == pAC->ActivePort) {
-			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 
-						    (pAC->RxDescrPerRing / 4);
-		    } else {
-			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 
-						    (pAC->RxDescrPerRing / 10);
-		    }
-		}
-	    }
-	} else {
-	    /* 
-	    ** Use the normal amount of rx buffers 
-	    */
-	    for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-		if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
-		    pAC->RxPort[i].RxFillLimit = 1;
-		} else {
-		    if (i == pAC->ActivePort) {
-			pAC->RxPort[i].RxFillLimit = 1;
-		    } else {
-			pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing -
-						    (pAC->RxDescrPerRing / 4);
-		    }
-		}
-	    }
-	}
-	
-	SkGeDeInit(pAC, pAC->IoBase);
-
-	/*
-	** enable/disable hardware support for long frames
-	*/
-	if (NewMtu > 1500) {
-// pAC->JumboActivated = SK_TRUE; /* is never set back !!! */
-		pAC->GIni.GIPortUsage = SK_JUMBO_LINK;
-	} else {
-	    if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
-		pAC->GIni.GIPortUsage = SK_MUL_LINK;
-	    } else {
-		pAC->GIni.GIPortUsage = SK_RED_LINK;
-	    }
-	}
-
-	SkGeInit(   pAC, pAC->IoBase, SK_INIT_IO);
-	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_IO);
-	SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
-	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO);
-	SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO);
-	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO);
-	SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO);
-	
-	/*
-	** tschilling:
-	** Speed and others are set back to default in level 1 init!
-	*/
-	GetConfiguration(pAC);
-	
-	SkGeInit(   pAC, pAC->IoBase, SK_INIT_RUN);
-	SkI2cInit(  pAC, pAC->IoBase, SK_INIT_RUN);
-	SkEventInit(pAC, pAC->IoBase, SK_INIT_RUN);
-	SkPnmiInit( pAC, pAC->IoBase, SK_INIT_RUN);
-	SkAddrInit( pAC, pAC->IoBase, SK_INIT_RUN);
-	SkRlmtInit( pAC, pAC->IoBase, SK_INIT_RUN);
-	SkTimerInit(pAC, pAC->IoBase, SK_INIT_RUN);
-
-	/*
-	** clear and reinit the rx rings here
-	*/
-	for (i=0; i<pAC->GIni.GIMacsFound; i++) {
-		ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE);
-		ClearRxRing(pAC, &pAC->RxPort[i]);
-		FillRxRing(pAC, &pAC->RxPort[i]);
-
-		/* 
-		** Enable transmit descriptor polling
-		*/
-		SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE);
-		FillRxRing(pAC, &pAC->RxPort[i]);
-	};
-
-	SkGeYellowLED(pAC, pAC->IoBase, 1);
-	SkDimEnableModerationIfNeeded(pAC);	
-	SkDimDisplayModerationSettings(pAC);
-
-	netif_start_queue(pAC->dev[pNet->PortNr]);
-	for (i=pAC->GIni.GIMacsFound-1; i>=0; i--) {
-		spin_unlock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock);
-	}
-
-	/* 
-	** Enable Interrupts again 
-	*/
-	SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask);
-	SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK);
-
-	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
-	SkEventDispatcher(pAC, pAC->IoBase);
-
-	/* 
-	** Notify RLMT about the changing and restarting one (or more) ports
-	*/
-	if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
-		EvPara.Para32[0] = pAC->RlmtNets;
-		EvPara.Para32[1] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, EvPara);
-		EvPara.Para32[0] = pNet->PortNr;
-		EvPara.Para32[1] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
-			
-		if (netif_running(pOtherDev)) {
-			DEV_NET *pOtherNet = netdev_priv(pOtherDev);
-			EvPara.Para32[0] = pOtherNet->PortNr;
-			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
-		}
-	} else {
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
-	}
-
-	SkEventDispatcher(pAC, pAC->IoBase);
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-	
-	/*
-	** While testing this driver with latest kernel 2.5 (2.5.70), it 
-	** seems as if upper layers have a problem to handle a successful
-	** return value of '0'. If such a zero is returned, the complete 
-	** system hangs for several minutes (!), which is in acceptable.
-	**
-	** Currently it is not clear, what the exact reason for this problem
-	** is. The implemented workaround for 2.5 is to return the desired 
-	** new MTU size if all needed changes for the new MTU size where 
-	** performed. In kernels 2.2 and 2.4, a zero value is returned,
-	** which indicates the successful change of the mtu-size.
-	*/
-	return NewMtu;
-
-} /* SkGeChangeMtu */
-
-
-/*****************************************************************************
- *
- * 	SkGeStats - return ethernet device statistics
- *
- * Description:
- *	This function return statistic data about the ethernet device
- *	to the operating system.
- *
- * Returns:
- *	pointer to the statistic structure.
- */
-static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev)
-{
-DEV_NET *pNet = netdev_priv(dev);
-SK_AC	*pAC = pNet->pAC;
-SK_PNMI_STRUCT_DATA *pPnmiStruct;       /* structure for all Pnmi-Data */
-SK_PNMI_STAT    *pPnmiStat;             /* pointer to virtual XMAC stat. data */
-SK_PNMI_CONF    *pPnmiConf;             /* pointer to virtual link config. */
-unsigned int    Size;                   /* size of pnmi struct */
-unsigned long	Flags;			/* for spin lock */
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeStats starts now...\n"));
-	pPnmiStruct = &pAC->PnmiStruct;
-
-#ifdef SK_DIAG_SUPPORT
-        if ((pAC->DiagModeActive == DIAG_NOTACTIVE) &&
-                (pAC->BoardLevel == SK_INIT_RUN)) {
-#endif
-        SK_MEMSET(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA));
-        spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-        Size = SK_PNMI_STRUCT_SIZE;
-		SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr);
-        spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-#ifdef SK_DIAG_SUPPORT
-	}
-#endif
-
-        pPnmiStat = &pPnmiStruct->Stat[0];
-        pPnmiConf = &pPnmiStruct->Conf[0];
-
-	pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF;
-	pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF;
-	pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts;
-	pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts;
-	
-        if (dev->mtu <= 1500) {
-                pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF;
-        } else {
-                pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts -
-                        pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF);
-	}
-
-
-	if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12)
-		pAC->stats.rx_errors = pAC->stats.rx_errors - pPnmiStat->StatRxShortsCts;
-
-	pAC->stats.tx_errors = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;
-	pAC->stats.rx_dropped = (SK_U32) pPnmiStruct->RxNoBufCts & 0xFFFFFFFF;
-	pAC->stats.tx_dropped = (SK_U32) pPnmiStruct->TxNoBufCts & 0xFFFFFFFF;
-	pAC->stats.multicast = (SK_U32) pPnmiStat->StatRxMulticastOkCts & 0xFFFFFFFF;
-	pAC->stats.collisions = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF;
-
-	/* detailed rx_errors: */
-	pAC->stats.rx_length_errors = (SK_U32) pPnmiStat->StatRxRuntCts & 0xFFFFFFFF;
-	pAC->stats.rx_over_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
-	pAC->stats.rx_crc_errors = (SK_U32) pPnmiStat->StatRxFcsCts & 0xFFFFFFFF;
-	pAC->stats.rx_frame_errors = (SK_U32) pPnmiStat->StatRxFramingCts & 0xFFFFFFFF;
-	pAC->stats.rx_fifo_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF;
-	pAC->stats.rx_missed_errors = (SK_U32) pPnmiStat->StatRxMissedCts & 0xFFFFFFFF;
-
-	/* detailed tx_errors */
-	pAC->stats.tx_aborted_errors = (SK_U32) 0;
-	pAC->stats.tx_carrier_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
-	pAC->stats.tx_fifo_errors = (SK_U32) pPnmiStat->StatTxFifoUnderrunCts & 0xFFFFFFFF;
-	pAC->stats.tx_heartbeat_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF;
-	pAC->stats.tx_window_errors = (SK_U32) 0;
-
-	return(&pAC->stats);
-} /* SkGeStats */
-
-/*
- * Basic MII register access
- */
-static int SkGeMiiIoctl(struct net_device *dev,
-			struct mii_ioctl_data *data, int cmd)
-{
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-	SK_IOC IoC = pAC->IoBase;
-	int Port = pNet->PortNr;
-	SK_GEPORT *pPrt = &pAC->GIni.GP[Port];
-	unsigned long Flags;
-	int err = 0;
-	int reg = data->reg_num & 0x1f;
-	SK_U16 val = data->val_in;
-
-	if (!netif_running(dev))
-		return -ENODEV;	/* Phy still in reset */
-
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-	switch(cmd) {
-	case SIOCGMIIPHY:
-		data->phy_id = pPrt->PhyAddr;
-
-		/* fallthru */
-	case SIOCGMIIREG:
-		if (pAC->GIni.GIGenesis)
-			SkXmPhyRead(pAC, IoC, Port, reg, &val);
-		else
-			SkGmPhyRead(pAC, IoC, Port, reg, &val);
-
-		data->val_out = val;
-		break;
-
-	case SIOCSMIIREG:
-		if (!capable(CAP_NET_ADMIN))
-			err = -EPERM;
-
-		else if (pAC->GIni.GIGenesis)
-			SkXmPhyWrite(pAC, IoC, Port, reg, val);
-		else
-			SkGmPhyWrite(pAC, IoC, Port, reg, val);
-		break;
-	default:
-		err = -EOPNOTSUPP;
-	}
-        spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-	return err;
-}
-
-
-/*****************************************************************************
- *
- * 	SkGeIoctl - IO-control function
- *
- * Description:
- *	This function is called if an ioctl is issued on the device.
- *	There are three subfunction for reading, writing and test-writing
- *	the private MIB data structure (useful for SysKonnect-internal tools).
- *
- * Returns:
- *	0, if everything is ok
- *	!=0, on error
- */
-static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd)
-{
-DEV_NET		*pNet;
-SK_AC		*pAC;
-void		*pMemBuf;
-struct pci_dev  *pdev = NULL;
-SK_GE_IOCTL	Ioctl;
-unsigned int	Err = 0;
-int		Size = 0;
-int             Ret = 0;
-unsigned int	Length = 0;
-int		HeaderLength = sizeof(SK_U32) + sizeof(SK_U32);
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeIoctl starts now...\n"));
-
-	pNet = netdev_priv(dev);
-	pAC = pNet->pAC;
-	
-	if (cmd == SIOCGMIIPHY || cmd == SIOCSMIIREG || cmd == SIOCGMIIREG)
-	    return SkGeMiiIoctl(dev, if_mii(rq), cmd);
-
-	if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) {
-		return -EFAULT;
-	}
-
-	switch(cmd) {
-	case SK_IOCTL_SETMIB:
-	case SK_IOCTL_PRESETMIB:
-		if (!capable(CAP_NET_ADMIN)) return -EPERM;
- 	case SK_IOCTL_GETMIB:
-		if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData,
-			Ioctl.Len<sizeof(pAC->PnmiStruct)?
-			Ioctl.Len : sizeof(pAC->PnmiStruct))) {
-			return -EFAULT;
-		}
-		Size = SkGeIocMib(pNet, Ioctl.Len, cmd);
-		if(copy_to_user(Ioctl.pData, &pAC->PnmiStruct,
-			Ioctl.Len<Size? Ioctl.Len : Size)) {
-			return -EFAULT;
-		}
-		Ioctl.Len = Size;
-		if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
-			return -EFAULT;
-		}
-		break;
-	case SK_IOCTL_GEN:
-		if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) {
-			Length = Ioctl.Len;
-		} else {
-			Length = sizeof(pAC->PnmiStruct) + HeaderLength;
-		}
-		if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) {
-			return -ENOMEM;
-		}
-		if(copy_from_user(pMemBuf, Ioctl.pData, Length)) {
-			Err = -EFAULT;
-			goto fault_gen;
-		}
-		if ((Ret = SkPnmiGenIoctl(pAC, pAC->IoBase, pMemBuf, &Length, 0)) < 0) {
-			Err = -EFAULT;
-			goto fault_gen;
-		}
-		if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) {
-			Err = -EFAULT;
-			goto fault_gen;
-		}
-		Ioctl.Len = Length;
-		if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
-			Err = -EFAULT;
-			goto fault_gen;
-		}
-fault_gen:
-		kfree(pMemBuf); /* cleanup everything */
-		break;
-#ifdef SK_DIAG_SUPPORT
-       case SK_IOCTL_DIAG:
-		if (!capable(CAP_NET_ADMIN)) return -EPERM;
-		if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) {
-			Length = Ioctl.Len;
-		} else {
-			Length = sizeof(pAC->PnmiStruct) + HeaderLength;
-		}
-		if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) {
-			return -ENOMEM;
-		}
-		if(copy_from_user(pMemBuf, Ioctl.pData, Length)) {
-			Err = -EFAULT;
-			goto fault_diag;
-		}
-		pdev = pAC->PciDev;
-		Length = 3 * sizeof(SK_U32);  /* Error, Bus and Device */
-		/* 
-		** While coding this new IOCTL interface, only a few lines of code
-		** are to to be added. Therefore no dedicated function has been 
-		** added. If more functionality is added, a separate function 
-		** should be used...
-		*/
-		* ((SK_U32 *)pMemBuf) = 0;
-		* ((SK_U32 *)pMemBuf + 1) = pdev->bus->number;
-		* ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev));
-		if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) {
-			Err = -EFAULT;
-			goto fault_diag;
-		}
-		Ioctl.Len = Length;
-		if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) {
-			Err = -EFAULT;
-			goto fault_diag;
-		}
-fault_diag:
-		kfree(pMemBuf); /* cleanup everything */
-		break;
-#endif
-	default:
-		Err = -EOPNOTSUPP;
-	}
-
-	return(Err);
-
-} /* SkGeIoctl */
-
-
-/*****************************************************************************
- *
- * 	SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message
- *
- * Description:
- *	This function reads/writes the MIB data using PNMI (Private Network
- *	Management Interface).
- *	The destination for the data must be provided with the
- *	ioctl call and is given to the driver in the form of
- *	a user space address.
- *	Copying from the user-provided data area into kernel messages
- *	and back is done by copy_from_user and copy_to_user calls in
- *	SkGeIoctl.
- *
- * Returns:
- *	returned size from PNMI call
- */
-static int SkGeIocMib(
-DEV_NET		*pNet,	/* pointer to the adapter context */
-unsigned int	Size,	/* length of ioctl data */
-int		mode)	/* flag for set/preset */
-{
-unsigned long	Flags;	/* for spin lock */
-SK_AC		*pAC;
-
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("SkGeIocMib starts now...\n"));
-	pAC = pNet->pAC;
-	/* access MIB */
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-	switch(mode) {
-	case SK_IOCTL_GETMIB:
-		SkPnmiGetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
-			pNet->NetNr);
-		break;
-	case SK_IOCTL_PRESETMIB:
-		SkPnmiPreSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
-			pNet->NetNr);
-		break;
-	case SK_IOCTL_SETMIB:
-		SkPnmiSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size,
-			pNet->NetNr);
-		break;
-	default:
-		break;
-	}
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
-		("MIB data access succeeded\n"));
-	return (Size);
-} /* SkGeIocMib */
-
-
-/*****************************************************************************
- *
- * 	GetConfiguration - read configuration information
- *
- * Description:
- *	This function reads per-adapter configuration information from
- *	the options provided on the command line.
- *
- * Returns:
- *	none
- */
-static void GetConfiguration(
-SK_AC	*pAC)	/* pointer to the adapter context structure */
-{
-SK_I32	Port;		/* preferred port */
-SK_BOOL	AutoSet;
-SK_BOOL DupSet;
-int	LinkSpeed          = SK_LSPEED_AUTO;	/* Link speed */
-int	AutoNeg            = 1;			/* autoneg off (0) or on (1) */
-int	DuplexCap          = 0;			/* 0=both,1=full,2=half */
-int	FlowCtrl           = SK_FLOW_MODE_SYM_OR_REM;	/* FlowControl  */
-int	MSMode             = SK_MS_MODE_AUTO;	/* master/slave mode    */
-
-SK_BOOL IsConTypeDefined   = SK_TRUE;
-SK_BOOL IsLinkSpeedDefined = SK_TRUE;
-SK_BOOL IsFlowCtrlDefined  = SK_TRUE;
-SK_BOOL IsRoleDefined      = SK_TRUE;
-SK_BOOL IsModeDefined      = SK_TRUE;
-/*
- *	The two parameters AutoNeg. and DuplexCap. map to one configuration
- *	parameter. The mapping is described by this table:
- *	DuplexCap ->	|	both	|	full	|	half	|
- *	AutoNeg		|		|		|		|
- *	-----------------------------------------------------------------
- *	Off		|    illegal	|	Full	|	Half	|
- *	-----------------------------------------------------------------
- *	On		|   AutoBoth	|   AutoFull	|   AutoHalf	|
- *	-----------------------------------------------------------------
- *	Sense		|   AutoSense	|   AutoSense	|   AutoSense	|
- */
-int	Capabilities[3][3] =
-		{ {                -1, SK_LMODE_FULL     , SK_LMODE_HALF     },
-		  {SK_LMODE_AUTOBOTH , SK_LMODE_AUTOFULL , SK_LMODE_AUTOHALF },
-		  {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} };
-
-#define DC_BOTH	0
-#define DC_FULL 1
-#define DC_HALF 2
-#define AN_OFF	0
-#define AN_ON	1
-#define AN_SENS	2
-#define M_CurrPort pAC->GIni.GP[Port]
-
-
-	/*
-	** Set the default values first for both ports!
-	*/
-	for (Port = 0; Port < SK_MAX_MACS; Port++) {
-		M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH];
-		M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
-		M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
-		M_CurrPort.PLinkSpeed    = SK_LSPEED_AUTO;
-	}
-
-	/*
-	** Check merged parameter ConType. If it has not been used,
-	** verify any other parameter (e.g. AutoNeg) and use default values. 
-	**
-	** Stating both ConType and other lowlevel link parameters is also
-	** possible. If this is the case, the passed ConType-parameter is 
-	** overwritten by the lowlevel link parameter.
-	**
-	** The following settings are used for a merged ConType-parameter:
-	**
-	** ConType   DupCap   AutoNeg   FlowCtrl      Role      Speed
-	** -------   ------   -------   --------   ----------   -----
-	**  Auto      Both      On      SymOrRem      Auto       Auto
-	**  100FD     Full      Off       None      <ignored>    100
-	**  100HD     Half      Off       None      <ignored>    100
-	**  10FD      Full      Off       None      <ignored>    10
-	**  10HD      Half      Off       None      <ignored>    10
-	** 
-	** This ConType parameter is used for all ports of the adapter!
-	*/
-        if ( (ConType != NULL)                && 
-	     (pAC->Index < SK_MAX_CARD_PARAM) &&
-	     (ConType[pAC->Index] != NULL) ) {
-
-			/* Check chipset family */
-			if ((!pAC->ChipsetType) && 
-				(strcmp(ConType[pAC->Index],"Auto")!=0) &&
-				(strcmp(ConType[pAC->Index],"")!=0)) {
-				/* Set the speed parameter back */
-					printk("sk98lin: Illegal value \"%s\" " 
-							"for ConType."
-							" Using Auto.\n", 
-							ConType[pAC->Index]);
-
-					sprintf(ConType[pAC->Index], "Auto");	
-			}
-
-				if (strcmp(ConType[pAC->Index],"")==0) {
-			IsConTypeDefined = SK_FALSE; /* No ConType defined */
-				} else if (strcmp(ConType[pAC->Index],"Auto")==0) {
-		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
-			M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH];
-			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
-			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
-			M_CurrPort.PLinkSpeed    = SK_LSPEED_AUTO;
-		    }
-                } else if (strcmp(ConType[pAC->Index],"100FD")==0) {
-		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
-			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL];
-			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
-			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
-			M_CurrPort.PLinkSpeed    = SK_LSPEED_100MBPS;
-		    }
-                } else if (strcmp(ConType[pAC->Index],"100HD")==0) {
-		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
-			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF];
-			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
-			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
-			M_CurrPort.PLinkSpeed    = SK_LSPEED_100MBPS;
-		    }
-                } else if (strcmp(ConType[pAC->Index],"10FD")==0) {
-		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
-			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL];
-			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
-			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
-			M_CurrPort.PLinkSpeed    = SK_LSPEED_10MBPS;
-		    }
-                } else if (strcmp(ConType[pAC->Index],"10HD")==0) {
-		    for (Port = 0; Port < SK_MAX_MACS; Port++) {
-			M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF];
-			M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE;
-			M_CurrPort.PMSMode       = SK_MS_MODE_AUTO;
-			M_CurrPort.PLinkSpeed    = SK_LSPEED_10MBPS;
-		    }
-                } else { 
-		    printk("sk98lin: Illegal value \"%s\" for ConType\n", 
-			ConType[pAC->Index]);
-		    IsConTypeDefined = SK_FALSE; /* Wrong ConType defined */
-		}
-        } else {
-	    IsConTypeDefined = SK_FALSE; /* No ConType defined */
-	}
-
-	/*
-	** Parse any parameter settings for port A:
-	** a) any LinkSpeed stated?
-	*/
-	if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		Speed_A[pAC->Index] != NULL) {
-		if (strcmp(Speed_A[pAC->Index],"")==0) {
-		    IsLinkSpeedDefined = SK_FALSE;
-		} else if (strcmp(Speed_A[pAC->Index],"Auto")==0) {
-		    LinkSpeed = SK_LSPEED_AUTO;
-		} else if (strcmp(Speed_A[pAC->Index],"10")==0) {
-		    LinkSpeed = SK_LSPEED_10MBPS;
-		} else if (strcmp(Speed_A[pAC->Index],"100")==0) {
-		    LinkSpeed = SK_LSPEED_100MBPS;
-		} else if (strcmp(Speed_A[pAC->Index],"1000")==0) {
-		    LinkSpeed = SK_LSPEED_1000MBPS;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for Speed_A\n",
-			Speed_A[pAC->Index]);
-		    IsLinkSpeedDefined = SK_FALSE;
-		}
-	} else {
-	    IsLinkSpeedDefined = SK_FALSE;
-	}
-
-	/* 
-	** Check speed parameter: 
-	**    Only copper type adapter and GE V2 cards 
-	*/
-	if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) &&
-		((LinkSpeed != SK_LSPEED_AUTO) &&
-		(LinkSpeed != SK_LSPEED_1000MBPS))) {
-		printk("sk98lin: Illegal value for Speed_A. "
-			"Not a copper card or GE V2 card\n    Using "
-			"speed 1000\n");
-		LinkSpeed = SK_LSPEED_1000MBPS;
-	}
-	
-	/*	
-	** Decide whether to set new config value if somethig valid has
-	** been received.
-	*/
-	if (IsLinkSpeedDefined) {
-		pAC->GIni.GP[0].PLinkSpeed = LinkSpeed;
-	} 
-
-	/* 
-	** b) Any Autonegotiation and DuplexCapabilities set?
-	**    Please note that both belong together...
-	*/
-	AutoNeg = AN_ON; /* tschilling: Default: Autonegotiation on! */
-	AutoSet = SK_FALSE;
-	if (AutoNeg_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		AutoNeg_A[pAC->Index] != NULL) {
-		AutoSet = SK_TRUE;
-		if (strcmp(AutoNeg_A[pAC->Index],"")==0) {
-		    AutoSet = SK_FALSE;
-		} else if (strcmp(AutoNeg_A[pAC->Index],"On")==0) {
-		    AutoNeg = AN_ON;
-		} else if (strcmp(AutoNeg_A[pAC->Index],"Off")==0) {
-		    AutoNeg = AN_OFF;
-		} else if (strcmp(AutoNeg_A[pAC->Index],"Sense")==0) {
-		    AutoNeg = AN_SENS;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for AutoNeg_A\n",
-			AutoNeg_A[pAC->Index]);
-		}
-	}
-
-	DuplexCap = DC_BOTH;
-	DupSet    = SK_FALSE;
-	if (DupCap_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		DupCap_A[pAC->Index] != NULL) {
-		DupSet = SK_TRUE;
-		if (strcmp(DupCap_A[pAC->Index],"")==0) {
-		    DupSet = SK_FALSE;
-		} else if (strcmp(DupCap_A[pAC->Index],"Both")==0) {
-		    DuplexCap = DC_BOTH;
-		} else if (strcmp(DupCap_A[pAC->Index],"Full")==0) {
-		    DuplexCap = DC_FULL;
-		} else if (strcmp(DupCap_A[pAC->Index],"Half")==0) {
-		    DuplexCap = DC_HALF;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for DupCap_A\n",
-			DupCap_A[pAC->Index]);
-		}
-	}
-
-	/* 
-	** Check for illegal combinations 
-	*/
-	if ((LinkSpeed == SK_LSPEED_1000MBPS) &&
-		((DuplexCap == SK_LMODE_STAT_AUTOHALF) ||
-		(DuplexCap == SK_LMODE_STAT_HALF)) &&
-		(pAC->ChipsetType)) {
-		    printk("sk98lin: Half Duplex not possible with Gigabit speed!\n"
-					"    Using Full Duplex.\n");
-				DuplexCap = DC_FULL;
-	}
-
-	if ( AutoSet && AutoNeg==AN_SENS && DupSet) {
-		printk("sk98lin, Port A: DuplexCapabilities"
-			" ignored using Sense mode\n");
-	}
-
-	if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
-		printk("sk98lin: Port A: Illegal combination"
-			" of values AutoNeg. and DuplexCap.\n    Using "
-			"Full Duplex\n");
-		DuplexCap = DC_FULL;
-	}
-
-	if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
-		DuplexCap = DC_FULL;
-	}
-	
-	if (!AutoSet && DupSet) {
-		printk("sk98lin: Port A: Duplex setting not"
-			" possible in\n    default AutoNegotiation mode"
-			" (Sense).\n    Using AutoNegotiation On\n");
-		AutoNeg = AN_ON;
-	}
-	
-	/* 
-	** set the desired mode 
-	*/
-	if (AutoSet || DupSet) {
-	    pAC->GIni.GP[0].PLinkModeConf = Capabilities[AutoNeg][DuplexCap];
-	}
-	
-	/* 
-	** c) Any Flowcontrol-parameter set?
-	*/
-	if (FlowCtrl_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		FlowCtrl_A[pAC->Index] != NULL) {
-		if (strcmp(FlowCtrl_A[pAC->Index],"") == 0) {
-		    IsFlowCtrlDefined = SK_FALSE;
-		} else if (strcmp(FlowCtrl_A[pAC->Index],"SymOrRem") == 0) {
-		    FlowCtrl = SK_FLOW_MODE_SYM_OR_REM;
-		} else if (strcmp(FlowCtrl_A[pAC->Index],"Sym")==0) {
-		    FlowCtrl = SK_FLOW_MODE_SYMMETRIC;
-		} else if (strcmp(FlowCtrl_A[pAC->Index],"LocSend")==0) {
-		    FlowCtrl = SK_FLOW_MODE_LOC_SEND;
-		} else if (strcmp(FlowCtrl_A[pAC->Index],"None")==0) {
-		    FlowCtrl = SK_FLOW_MODE_NONE;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for FlowCtrl_A\n",
-                        FlowCtrl_A[pAC->Index]);
-		    IsFlowCtrlDefined = SK_FALSE;
-		}
-	} else {
-	   IsFlowCtrlDefined = SK_FALSE;
-	}
-
-	if (IsFlowCtrlDefined) {
-	    if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) {
-		printk("sk98lin: Port A: FlowControl"
-			" impossible without AutoNegotiation,"
-			" disabled\n");
-		FlowCtrl = SK_FLOW_MODE_NONE;
-	    }
-	    pAC->GIni.GP[0].PFlowCtrlMode = FlowCtrl;
-	}
-
-	/*
-	** d) What is with the RoleParameter?
-	*/
-	if (Role_A != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		Role_A[pAC->Index] != NULL) {
-		if (strcmp(Role_A[pAC->Index],"")==0) {
-		   IsRoleDefined = SK_FALSE;
-		} else if (strcmp(Role_A[pAC->Index],"Auto")==0) {
-		    MSMode = SK_MS_MODE_AUTO;
-		} else if (strcmp(Role_A[pAC->Index],"Master")==0) {
-		    MSMode = SK_MS_MODE_MASTER;
-		} else if (strcmp(Role_A[pAC->Index],"Slave")==0) {
-		    MSMode = SK_MS_MODE_SLAVE;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for Role_A\n",
-			Role_A[pAC->Index]);
-		    IsRoleDefined = SK_FALSE;
-		}
-	} else {
-	   IsRoleDefined = SK_FALSE;
-	}
-
-	if (IsRoleDefined == SK_TRUE) {
-	    pAC->GIni.GP[0].PMSMode = MSMode;
-	}
-	
-
-	
-	/* 
-	** Parse any parameter settings for port B:
-	** a) any LinkSpeed stated?
-	*/
-	IsConTypeDefined   = SK_TRUE;
-	IsLinkSpeedDefined = SK_TRUE;
-	IsFlowCtrlDefined  = SK_TRUE;
-	IsModeDefined      = SK_TRUE;
-
-	if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		Speed_B[pAC->Index] != NULL) {
-		if (strcmp(Speed_B[pAC->Index],"")==0) {
-		    IsLinkSpeedDefined = SK_FALSE;
-		} else if (strcmp(Speed_B[pAC->Index],"Auto")==0) {
-		    LinkSpeed = SK_LSPEED_AUTO;
-		} else if (strcmp(Speed_B[pAC->Index],"10")==0) {
-		    LinkSpeed = SK_LSPEED_10MBPS;
-		} else if (strcmp(Speed_B[pAC->Index],"100")==0) {
-		    LinkSpeed = SK_LSPEED_100MBPS;
-		} else if (strcmp(Speed_B[pAC->Index],"1000")==0) {
-		    LinkSpeed = SK_LSPEED_1000MBPS;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for Speed_B\n",
-			Speed_B[pAC->Index]);
-		    IsLinkSpeedDefined = SK_FALSE;
-		}
-	} else {
-	    IsLinkSpeedDefined = SK_FALSE;
-	}
-
-	/* 
-	** Check speed parameter:
-	**    Only copper type adapter and GE V2 cards 
-	*/
-	if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) &&
-		((LinkSpeed != SK_LSPEED_AUTO) &&
-		(LinkSpeed != SK_LSPEED_1000MBPS))) {
-		printk("sk98lin: Illegal value for Speed_B. "
-			"Not a copper card or GE V2 card\n    Using "
-			"speed 1000\n");
-		LinkSpeed = SK_LSPEED_1000MBPS;
-	}
-
-	/*      
-	** Decide whether to set new config value if somethig valid has
-	** been received.
-	*/
-        if (IsLinkSpeedDefined) {
-	    pAC->GIni.GP[1].PLinkSpeed = LinkSpeed;
-	}
-
-	/* 
-	** b) Any Autonegotiation and DuplexCapabilities set?
-	**    Please note that both belong together...
-	*/
-	AutoNeg = AN_SENS; /* default: do auto Sense */
-	AutoSet = SK_FALSE;
-	if (AutoNeg_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		AutoNeg_B[pAC->Index] != NULL) {
-		AutoSet = SK_TRUE;
-		if (strcmp(AutoNeg_B[pAC->Index],"")==0) {
-		    AutoSet = SK_FALSE;
-		} else if (strcmp(AutoNeg_B[pAC->Index],"On")==0) {
-		    AutoNeg = AN_ON;
-		} else if (strcmp(AutoNeg_B[pAC->Index],"Off")==0) {
-		    AutoNeg = AN_OFF;
-		} else if (strcmp(AutoNeg_B[pAC->Index],"Sense")==0) {
-		    AutoNeg = AN_SENS;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for AutoNeg_B\n",
-			AutoNeg_B[pAC->Index]);
-		}
-	}
-
-	DuplexCap = DC_BOTH;
-	DupSet    = SK_FALSE;
-	if (DupCap_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		DupCap_B[pAC->Index] != NULL) {
-		DupSet = SK_TRUE;
-		if (strcmp(DupCap_B[pAC->Index],"")==0) {
-		    DupSet = SK_FALSE;
-		} else if (strcmp(DupCap_B[pAC->Index],"Both")==0) {
-		    DuplexCap = DC_BOTH;
-		} else if (strcmp(DupCap_B[pAC->Index],"Full")==0) {
-		    DuplexCap = DC_FULL;
-		} else if (strcmp(DupCap_B[pAC->Index],"Half")==0) {
-		    DuplexCap = DC_HALF;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for DupCap_B\n",
-			DupCap_B[pAC->Index]);
-		}
-	}
-
-	
-	/* 
-	** Check for illegal combinations 
-	*/
-	if ((LinkSpeed == SK_LSPEED_1000MBPS) &&
-		((DuplexCap == SK_LMODE_STAT_AUTOHALF) ||
-		(DuplexCap == SK_LMODE_STAT_HALF)) &&
-		(pAC->ChipsetType)) {
-		    printk("sk98lin: Half Duplex not possible with Gigabit speed!\n"
-					"    Using Full Duplex.\n");
-				DuplexCap = DC_FULL;
-	}
-
-	if (AutoSet && AutoNeg==AN_SENS && DupSet) {
-		printk("sk98lin, Port B: DuplexCapabilities"
-			" ignored using Sense mode\n");
-	}
-
-	if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){
-		printk("sk98lin: Port B: Illegal combination"
-			" of values AutoNeg. and DuplexCap.\n    Using "
-			"Full Duplex\n");
-		DuplexCap = DC_FULL;
-	}
-
-	if (AutoSet && AutoNeg==AN_OFF && !DupSet) {
-		DuplexCap = DC_FULL;
-	}
-	
-	if (!AutoSet && DupSet) {
-		printk("sk98lin: Port B: Duplex setting not"
-			" possible in\n    default AutoNegotiation mode"
-			" (Sense).\n    Using AutoNegotiation On\n");
-		AutoNeg = AN_ON;
-	}
-
-	/* 
-	** set the desired mode 
-	*/
-	if (AutoSet || DupSet) {
-	    pAC->GIni.GP[1].PLinkModeConf = Capabilities[AutoNeg][DuplexCap];
-	}
-
-	/*
-	** c) Any FlowCtrl parameter set?
-	*/
-	if (FlowCtrl_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		FlowCtrl_B[pAC->Index] != NULL) {
-		if (strcmp(FlowCtrl_B[pAC->Index],"") == 0) {
-		    IsFlowCtrlDefined = SK_FALSE;
-		} else if (strcmp(FlowCtrl_B[pAC->Index],"SymOrRem") == 0) {
-		    FlowCtrl = SK_FLOW_MODE_SYM_OR_REM;
-		} else if (strcmp(FlowCtrl_B[pAC->Index],"Sym")==0) {
-		    FlowCtrl = SK_FLOW_MODE_SYMMETRIC;
-		} else if (strcmp(FlowCtrl_B[pAC->Index],"LocSend")==0) {
-		    FlowCtrl = SK_FLOW_MODE_LOC_SEND;
-		} else if (strcmp(FlowCtrl_B[pAC->Index],"None")==0) {
-		    FlowCtrl = SK_FLOW_MODE_NONE;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for FlowCtrl_B\n",
-			FlowCtrl_B[pAC->Index]);
-		    IsFlowCtrlDefined = SK_FALSE;
-		}
-	} else {
-		IsFlowCtrlDefined = SK_FALSE;
-	}
-
-	if (IsFlowCtrlDefined) {
-	    if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) {
-		printk("sk98lin: Port B: FlowControl"
-			" impossible without AutoNegotiation,"
-			" disabled\n");
-		FlowCtrl = SK_FLOW_MODE_NONE;
-	    }
-	    pAC->GIni.GP[1].PFlowCtrlMode = FlowCtrl;
-	}
-
-	/*
-	** d) What is the RoleParameter?
-	*/
-	if (Role_B != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		Role_B[pAC->Index] != NULL) {
-		if (strcmp(Role_B[pAC->Index],"")==0) {
-		    IsRoleDefined = SK_FALSE;
-		} else if (strcmp(Role_B[pAC->Index],"Auto")==0) {
-		    MSMode = SK_MS_MODE_AUTO;
-		} else if (strcmp(Role_B[pAC->Index],"Master")==0) {
-		    MSMode = SK_MS_MODE_MASTER;
-		} else if (strcmp(Role_B[pAC->Index],"Slave")==0) {
-		    MSMode = SK_MS_MODE_SLAVE;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for Role_B\n",
-			Role_B[pAC->Index]);
-		    IsRoleDefined = SK_FALSE;
-		}
-	} else {
-	    IsRoleDefined = SK_FALSE;
-	}
-
-	if (IsRoleDefined) {
-	    pAC->GIni.GP[1].PMSMode = MSMode;
-	}
-	
-	/*
-	** Evaluate settings for both ports
-	*/
-	pAC->ActivePort = 0;
-	if (PrefPort != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		PrefPort[pAC->Index] != NULL) {
-		if (strcmp(PrefPort[pAC->Index],"") == 0) { /* Auto */
-			pAC->ActivePort             =  0;
-			pAC->Rlmt.Net[0].Preference = -1; /* auto */
-			pAC->Rlmt.Net[0].PrefPort   =  0;
-		} else if (strcmp(PrefPort[pAC->Index],"A") == 0) {
-			/*
-			** do not set ActivePort here, thus a port
-			** switch is issued after net up.
-			*/
-			Port                        = 0;
-			pAC->Rlmt.Net[0].Preference = Port;
-			pAC->Rlmt.Net[0].PrefPort   = Port;
-		} else if (strcmp(PrefPort[pAC->Index],"B") == 0) {
-			/*
-			** do not set ActivePort here, thus a port
-			** switch is issued after net up.
-			*/
-			if (pAC->GIni.GIMacsFound == 1) {
-				printk("sk98lin: Illegal value \"B\" for PrefPort.\n"
-					"      Port B not available on single port adapters.\n");
-
-				pAC->ActivePort             =  0;
-				pAC->Rlmt.Net[0].Preference = -1; /* auto */
-				pAC->Rlmt.Net[0].PrefPort   =  0;
-			} else {
-				Port                        = 1;
-				pAC->Rlmt.Net[0].Preference = Port;
-				pAC->Rlmt.Net[0].PrefPort   = Port;
-			}
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for PrefPort\n",
-			PrefPort[pAC->Index]);
-		}
-	}
-
-	pAC->RlmtNets = 1;
-
-	if (RlmtMode != NULL && pAC->Index<SK_MAX_CARD_PARAM &&
-		RlmtMode[pAC->Index] != NULL) {
-		if (strcmp(RlmtMode[pAC->Index], "") == 0) {
-			pAC->RlmtMode = 0;
-		} else if (strcmp(RlmtMode[pAC->Index], "CheckLinkState") == 0) {
-			pAC->RlmtMode = SK_RLMT_CHECK_LINK;
-		} else if (strcmp(RlmtMode[pAC->Index], "CheckLocalPort") == 0) {
-			pAC->RlmtMode = SK_RLMT_CHECK_LINK |
-					SK_RLMT_CHECK_LOC_LINK;
-		} else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) {
-			pAC->RlmtMode = SK_RLMT_CHECK_LINK     |
-					SK_RLMT_CHECK_LOC_LINK |
-					SK_RLMT_CHECK_SEG;
-		} else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) &&
-			(pAC->GIni.GIMacsFound == 2)) {
-			pAC->RlmtMode = SK_RLMT_CHECK_LINK;
-			pAC->RlmtNets = 2;
-		} else {
-		    printk("sk98lin: Illegal value \"%s\" for"
-			" RlmtMode, using default\n", 
-			RlmtMode[pAC->Index]);
-			pAC->RlmtMode = 0;
-		}
-	} else {
-		pAC->RlmtMode = 0;
-	}
-	
-	/*
-	** Check the interrupt moderation parameters
-	*/
-	if (Moderation[pAC->Index] != NULL) {
-		if (strcmp(Moderation[pAC->Index], "") == 0) {
-			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
-		} else if (strcmp(Moderation[pAC->Index], "Static") == 0) {
-			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_STATIC;
-		} else if (strcmp(Moderation[pAC->Index], "Dynamic") == 0) {
-			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_DYNAMIC;
-		} else if (strcmp(Moderation[pAC->Index], "None") == 0) {
-			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
-		} else {
-	   		printk("sk98lin: Illegal value \"%s\" for Moderation.\n"
-				"      Disable interrupt moderation.\n",
-				Moderation[pAC->Index]);
-			pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
-		}
-	} else {
-		pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE;
-	}
-
-	if (Stats[pAC->Index] != NULL) {
-		if (strcmp(Stats[pAC->Index], "Yes") == 0) {
-			pAC->DynIrqModInfo.DisplayStats = SK_TRUE;
-		} else {
-			pAC->DynIrqModInfo.DisplayStats = SK_FALSE;
-		}
-	} else {
-		pAC->DynIrqModInfo.DisplayStats = SK_FALSE;
-	}
-
-	if (ModerationMask[pAC->Index] != NULL) {
-		if (strcmp(ModerationMask[pAC->Index], "Rx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY;
-		} else if (strcmp(ModerationMask[pAC->Index], "Tx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_ONLY;
-		} else if (strcmp(ModerationMask[pAC->Index], "Sp") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_ONLY;
-		} else if (strcmp(ModerationMask[pAC->Index], "RxSp") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX;
-		} else if (strcmp(ModerationMask[pAC->Index], "SpRx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX;
-		} else if (strcmp(ModerationMask[pAC->Index], "RxTx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX;
-		} else if (strcmp(ModerationMask[pAC->Index], "TxRx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX;
-		} else if (strcmp(ModerationMask[pAC->Index], "TxSp") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX;
-		} else if (strcmp(ModerationMask[pAC->Index], "SpTx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX;
-		} else if (strcmp(ModerationMask[pAC->Index], "RxTxSp") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
-		} else if (strcmp(ModerationMask[pAC->Index], "RxSpTx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
-		} else if (strcmp(ModerationMask[pAC->Index], "TxRxSp") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
-		} else if (strcmp(ModerationMask[pAC->Index], "TxSpRx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
-		} else if (strcmp(ModerationMask[pAC->Index], "SpTxRx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
-		} else if (strcmp(ModerationMask[pAC->Index], "SpRxTx") == 0) {
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP;
-		} else { /* some rubbish */
-			pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY;
-		}
-	} else {  /* operator has stated nothing */
-		pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX;
-	}
-
-	if (AutoSizing[pAC->Index] != NULL) {
-		if (strcmp(AutoSizing[pAC->Index], "On") == 0) {
-			pAC->DynIrqModInfo.AutoSizing = SK_FALSE;
-		} else {
-			pAC->DynIrqModInfo.AutoSizing = SK_FALSE;
-		}
-	} else {  /* operator has stated nothing */
-		pAC->DynIrqModInfo.AutoSizing = SK_FALSE;
-	}
-
-	if (IntsPerSec[pAC->Index] != 0) {
-		if ((IntsPerSec[pAC->Index]< C_INT_MOD_IPS_LOWER_RANGE) || 
-			(IntsPerSec[pAC->Index] > C_INT_MOD_IPS_UPPER_RANGE)) {
-	   		printk("sk98lin: Illegal value \"%d\" for IntsPerSec. (Range: %d - %d)\n"
-				"      Using default value of %i.\n", 
-				IntsPerSec[pAC->Index],
-				C_INT_MOD_IPS_LOWER_RANGE,
-				C_INT_MOD_IPS_UPPER_RANGE,
-				C_INTS_PER_SEC_DEFAULT);
-			pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT;
-		} else {
-			pAC->DynIrqModInfo.MaxModIntsPerSec = IntsPerSec[pAC->Index];
-		}
-	} else {
-		pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT;
-	}
-
-	/*
-	** Evaluate upper and lower moderation threshold
-	*/
-	pAC->DynIrqModInfo.MaxModIntsPerSecUpperLimit =
-		pAC->DynIrqModInfo.MaxModIntsPerSec +
-		(pAC->DynIrqModInfo.MaxModIntsPerSec / 2);
-
-	pAC->DynIrqModInfo.MaxModIntsPerSecLowerLimit =
-		pAC->DynIrqModInfo.MaxModIntsPerSec -
-		(pAC->DynIrqModInfo.MaxModIntsPerSec / 2);
-
-	pAC->DynIrqModInfo.PrevTimeVal = jiffies;  /* initial value */
-
-
-} /* GetConfiguration */
-
-
-/*****************************************************************************
- *
- * 	ProductStr - return a adapter identification string from vpd
- *
- * Description:
- *	This function reads the product name string from the vpd area
- *	and puts it the field pAC->DeviceString.
- *
- * Returns: N/A
- */
-static inline int ProductStr(
-	SK_AC	*pAC,		/* pointer to adapter context */
-	char    *DeviceStr,	/* result string */
-	int      StrLen		/* length of the string */
-)
-{
-char	Keyword[] = VPD_NAME;	/* vpd productname identifier */
-int	ReturnCode;		/* return code from vpd_read */
-unsigned long Flags;
-
-	spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-	ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen);
-	spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-
-	return ReturnCode;
-} /* ProductStr */
-
-/*****************************************************************************
- *
- *      StartDrvCleanupTimer - Start timer to check for descriptors which
- *                             might be placed in descriptor ring, but
- *                             havent been handled up to now
- *
- * Description:
- *      This function requests a HW-timer fo the Yukon card. The actions to
- *      perform when this timer expires, are located in the SkDrvEvent().
- *
- * Returns: N/A
- */
-static void
-StartDrvCleanupTimer(SK_AC *pAC) {
-    SK_EVPARA    EventParam;   /* Event struct for timer event */
-
-    SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam));
-    EventParam.Para32[0] = SK_DRV_RX_CLEANUP_TIMER;
-    SkTimerStart(pAC, pAC->IoBase, &pAC->DrvCleanupTimer,
-                 SK_DRV_RX_CLEANUP_TIMER_LENGTH,
-                 SKGE_DRV, SK_DRV_TIMER, EventParam);
-}
-
-/*****************************************************************************
- *
- *      StopDrvCleanupTimer - Stop timer to check for descriptors
- *
- * Description:
- *      This function requests a HW-timer fo the Yukon card. The actions to
- *      perform when this timer expires, are located in the SkDrvEvent().
- *
- * Returns: N/A
- */
-static void
-StopDrvCleanupTimer(SK_AC *pAC) {
-    SkTimerStop(pAC, pAC->IoBase, &pAC->DrvCleanupTimer);
-    SK_MEMSET((char *) &pAC->DrvCleanupTimer, 0, sizeof(SK_TIMER));
-}
-
-/****************************************************************************/
-/* functions for common modules *********************************************/
-/****************************************************************************/
-
-
-/*****************************************************************************
- *
- *	SkDrvAllocRlmtMbuf - allocate an RLMT mbuf
- *
- * Description:
- *	This routine returns an RLMT mbuf or NULL. The RLMT Mbuf structure
- *	is embedded into a socket buff data area.
- *
- * Context:
- *	runtime
- *
- * Returns:
- *	NULL or pointer to Mbuf.
- */
-SK_MBUF *SkDrvAllocRlmtMbuf(
-SK_AC		*pAC,		/* pointer to adapter context */
-SK_IOC		IoC,		/* the IO-context */
-unsigned	BufferSize)	/* size of the requested buffer */
-{
-SK_MBUF		*pRlmtMbuf;	/* pointer to a new rlmt-mbuf structure */
-struct sk_buff	*pMsgBlock;	/* pointer to a new message block */
-
-	pMsgBlock = alloc_skb(BufferSize + sizeof(SK_MBUF), GFP_ATOMIC);
-	if (pMsgBlock == NULL) {
-		return (NULL);
-	}
-	pRlmtMbuf = (SK_MBUF*) pMsgBlock->data;
-	skb_reserve(pMsgBlock, sizeof(SK_MBUF));
-	pRlmtMbuf->pNext = NULL;
-	pRlmtMbuf->pOs = pMsgBlock;
-	pRlmtMbuf->pData = pMsgBlock->data;	/* Data buffer. */
-	pRlmtMbuf->Size = BufferSize;		/* Data buffer size. */
-	pRlmtMbuf->Length = 0;		/* Length of packet (<= Size). */
-	return (pRlmtMbuf);
-
-} /* SkDrvAllocRlmtMbuf */
-
-
-/*****************************************************************************
- *
- *	SkDrvFreeRlmtMbuf - free an RLMT mbuf
- *
- * Description:
- *	This routine frees one or more RLMT mbuf(s).
- *
- * Context:
- *	runtime
- *
- * Returns:
- *	Nothing
- */
-void  SkDrvFreeRlmtMbuf(
-SK_AC		*pAC,		/* pointer to adapter context */
-SK_IOC		IoC,		/* the IO-context */
-SK_MBUF		*pMbuf)		/* size of the requested buffer */
-{
-SK_MBUF		*pFreeMbuf;
-SK_MBUF		*pNextMbuf;
-
-	pFreeMbuf = pMbuf;
-	do {
-		pNextMbuf = pFreeMbuf->pNext;
-		DEV_KFREE_SKB_ANY(pFreeMbuf->pOs);
-		pFreeMbuf = pNextMbuf;
-	} while ( pFreeMbuf != NULL );
-} /* SkDrvFreeRlmtMbuf */
-
-
-/*****************************************************************************
- *
- *	SkOsGetTime - provide a time value
- *
- * Description:
- *	This routine provides a time value. The unit is 1/HZ (defined by Linux).
- *	It is not used for absolute time, but only for time differences.
- *
- *
- * Returns:
- *	Time value
- */
-SK_U64 SkOsGetTime(SK_AC *pAC)
-{
-	SK_U64	PrivateJiffies;
-	SkOsGetTimeCurrent(pAC, &PrivateJiffies);
-	return PrivateJiffies;
-} /* SkOsGetTime */
-
-
-/*****************************************************************************
- *
- *	SkPciReadCfgDWord - read a 32 bit value from pci config space
- *
- * Description:
- *	This routine reads a 32 bit value from the pci configuration
- *	space.
- *
- * Returns:
- *	0 - indicate everything worked ok.
- *	!= 0 - error indication
- */
-int SkPciReadCfgDWord(
-SK_AC *pAC,		/* Adapter Control structure pointer */
-int PciAddr,		/* PCI register address */
-SK_U32 *pVal)		/* pointer to store the read value */
-{
-	pci_read_config_dword(pAC->PciDev, PciAddr, pVal);
-	return(0);
-} /* SkPciReadCfgDWord */
-
-
-/*****************************************************************************
- *
- *	SkPciReadCfgWord - read a 16 bit value from pci config space
- *
- * Description:
- *	This routine reads a 16 bit value from the pci configuration
- *	space.
- *
- * Returns:
- *	0 - indicate everything worked ok.
- *	!= 0 - error indication
- */
-int SkPciReadCfgWord(
-SK_AC *pAC,	/* Adapter Control structure pointer */
-int PciAddr,		/* PCI register address */
-SK_U16 *pVal)		/* pointer to store the read value */
-{
-	pci_read_config_word(pAC->PciDev, PciAddr, pVal);
-	return(0);
-} /* SkPciReadCfgWord */
-
-
-/*****************************************************************************
- *
- *	SkPciReadCfgByte - read a 8 bit value from pci config space
- *
- * Description:
- *	This routine reads a 8 bit value from the pci configuration
- *	space.
- *
- * Returns:
- *	0 - indicate everything worked ok.
- *	!= 0 - error indication
- */
-int SkPciReadCfgByte(
-SK_AC *pAC,	/* Adapter Control structure pointer */
-int PciAddr,		/* PCI register address */
-SK_U8 *pVal)		/* pointer to store the read value */
-{
-	pci_read_config_byte(pAC->PciDev, PciAddr, pVal);
-	return(0);
-} /* SkPciReadCfgByte */
-
-
-/*****************************************************************************
- *
- *	SkPciWriteCfgWord - write a 16 bit value to pci config space
- *
- * Description:
- *	This routine writes a 16 bit value to the pci configuration
- *	space. The flag PciConfigUp indicates whether the config space
- *	is accesible or must be set up first.
- *
- * Returns:
- *	0 - indicate everything worked ok.
- *	!= 0 - error indication
- */
-int SkPciWriteCfgWord(
-SK_AC *pAC,	/* Adapter Control structure pointer */
-int PciAddr,		/* PCI register address */
-SK_U16 Val)		/* pointer to store the read value */
-{
-	pci_write_config_word(pAC->PciDev, PciAddr, Val);
-	return(0);
-} /* SkPciWriteCfgWord */
-
-
-/*****************************************************************************
- *
- *	SkPciWriteCfgWord - write a 8 bit value to pci config space
- *
- * Description:
- *	This routine writes a 8 bit value to the pci configuration
- *	space. The flag PciConfigUp indicates whether the config space
- *	is accesible or must be set up first.
- *
- * Returns:
- *	0 - indicate everything worked ok.
- *	!= 0 - error indication
- */
-int SkPciWriteCfgByte(
-SK_AC *pAC,	/* Adapter Control structure pointer */
-int PciAddr,		/* PCI register address */
-SK_U8 Val)		/* pointer to store the read value */
-{
-	pci_write_config_byte(pAC->PciDev, PciAddr, Val);
-	return(0);
-} /* SkPciWriteCfgByte */
-
-
-/*****************************************************************************
- *
- *	SkDrvEvent - handle driver events
- *
- * Description:
- *	This function handles events from all modules directed to the driver
- *
- * Context:
- *	Is called under protection of slow path lock.
- *
- * Returns:
- *	0 if everything ok
- *	< 0  on error
- *	
- */
-int SkDrvEvent(
-SK_AC *pAC,		/* pointer to adapter context */
-SK_IOC IoC,		/* io-context */
-SK_U32 Event,		/* event-id */
-SK_EVPARA Param)	/* event-parameter */
-{
-SK_MBUF		*pRlmtMbuf;	/* pointer to a rlmt-mbuf structure */
-struct sk_buff	*pMsg;		/* pointer to a message block */
-int		FromPort;	/* the port from which we switch away */
-int		ToPort;		/* the port we switch to */
-SK_EVPARA	NewPara;	/* parameter for further events */
-int		Stat;
-unsigned long	Flags;
-SK_BOOL		DualNet;
-
-	switch (Event) {
-	case SK_DRV_ADAP_FAIL:
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("ADAPTER FAIL EVENT\n"));
-		printk("%s: Adapter failed.\n", pAC->dev[0]->name);
-		/* disable interrupts */
-		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
-		/* cgoos */
-		break;
-	case SK_DRV_PORT_FAIL:
-		FromPort = Param.Para32[0];
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("PORT FAIL EVENT, Port: %d\n", FromPort));
-		if (FromPort == 0) {
-			printk("%s: Port A failed.\n", pAC->dev[0]->name);
-		} else {
-			printk("%s: Port B failed.\n", pAC->dev[1]->name);
-		}
-		/* cgoos */
-		break;
-	case SK_DRV_PORT_RESET:	 /* SK_U32 PortIdx */
-		/* action list 4 */
-		FromPort = Param.Para32[0];
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("PORT RESET EVENT, Port: %d ", FromPort));
-		NewPara.Para64 = FromPort;
-		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
-		spin_lock_irqsave(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-
-		SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST);
-		netif_carrier_off(pAC->dev[Param.Para32[0]]);
-		spin_unlock_irqrestore(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-		
-		/* clear rx ring from received frames */
-		ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE);
-		
-		ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
-		spin_lock_irqsave(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-		
-		/* tschilling: Handling of return value inserted. */
-		if (SkGeInitPort(pAC, IoC, FromPort)) {
-			if (FromPort == 0) {
-				printk("%s: SkGeInitPort A failed.\n", pAC->dev[0]->name);
-			} else {
-				printk("%s: SkGeInitPort B failed.\n", pAC->dev[1]->name);
-			}
-		}
-		SkAddrMcUpdate(pAC,IoC, FromPort);
-		PortReInitBmu(pAC, FromPort);
-		SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
-		ClearAndStartRx(pAC, FromPort);
-		spin_unlock_irqrestore(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-		break;
-	case SK_DRV_NET_UP:	 /* SK_U32 PortIdx */
-	{	struct net_device *dev = pAC->dev[Param.Para32[0]];
-		/* action list 5 */
-		FromPort = Param.Para32[0];
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("NET UP EVENT, Port: %d ", Param.Para32[0]));
-		/* Mac update */
-		SkAddrMcUpdate(pAC,IoC, FromPort);
-
-		if (DoPrintInterfaceChange) {
-		printk("%s: network connection up using"
-			" port %c\n", pAC->dev[Param.Para32[0]]->name, 'A'+Param.Para32[0]);
-
-		/* tschilling: Values changed according to LinkSpeedUsed. */
-		Stat = pAC->GIni.GP[FromPort].PLinkSpeedUsed;
-		if (Stat == SK_LSPEED_STAT_10MBPS) {
-			printk("    speed:           10\n");
-		} else if (Stat == SK_LSPEED_STAT_100MBPS) {
-			printk("    speed:           100\n");
-		} else if (Stat == SK_LSPEED_STAT_1000MBPS) {
-			printk("    speed:           1000\n");
-		} else {
-			printk("    speed:           unknown\n");
-		}
-
-
-		Stat = pAC->GIni.GP[FromPort].PLinkModeStatus;
-		if (Stat == SK_LMODE_STAT_AUTOHALF ||
-			Stat == SK_LMODE_STAT_AUTOFULL) {
-			printk("    autonegotiation: yes\n");
-		}
-		else {
-			printk("    autonegotiation: no\n");
-		}
-		if (Stat == SK_LMODE_STAT_AUTOHALF ||
-			Stat == SK_LMODE_STAT_HALF) {
-			printk("    duplex mode:     half\n");
-		}
-		else {
-			printk("    duplex mode:     full\n");
-		}
-		Stat = pAC->GIni.GP[FromPort].PFlowCtrlStatus;
-		if (Stat == SK_FLOW_STAT_REM_SEND ) {
-			printk("    flowctrl:        remote send\n");
-		}
-		else if (Stat == SK_FLOW_STAT_LOC_SEND ){
-			printk("    flowctrl:        local send\n");
-		}
-		else if (Stat == SK_FLOW_STAT_SYMMETRIC ){
-			printk("    flowctrl:        symmetric\n");
-		}
-		else {
-			printk("    flowctrl:        none\n");
-		}
-		
-		/* tschilling: Check against CopperType now. */
-		if ((pAC->GIni.GICopperType == SK_TRUE) &&
-			(pAC->GIni.GP[FromPort].PLinkSpeedUsed ==
-			SK_LSPEED_STAT_1000MBPS)) {
-			Stat = pAC->GIni.GP[FromPort].PMSStatus;
-			if (Stat == SK_MS_STAT_MASTER ) {
-				printk("    role:            master\n");
-			}
-			else if (Stat == SK_MS_STAT_SLAVE ) {
-				printk("    role:            slave\n");
-			}
-			else {
-				printk("    role:            ???\n");
-			}
-		}
-
-		/* 
-		   Display dim (dynamic interrupt moderation) 
-		   informations
-		 */
-		if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC)
-			printk("    irq moderation:  static (%d ints/sec)\n",
-					pAC->DynIrqModInfo.MaxModIntsPerSec);
-		else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC)
-			printk("    irq moderation:  dynamic (%d ints/sec)\n",
-					pAC->DynIrqModInfo.MaxModIntsPerSec);
-		else
-			printk("    irq moderation:  disabled\n");
-
-
-		printk("    scatter-gather:  %s\n",
-		       (dev->features & NETIF_F_SG) ? "enabled" : "disabled");
-		printk("    tx-checksum:     %s\n",
-		       (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled");
-		printk("    rx-checksum:     %s\n",
-		       pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled");
-
-		} else {
-                        DoPrintInterfaceChange = SK_TRUE;
-                }
-	
-		if ((Param.Para32[0] != pAC->ActivePort) &&
-			(pAC->RlmtNets == 1)) {
-			NewPara.Para32[0] = pAC->ActivePort;
-			NewPara.Para32[1] = Param.Para32[0];
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_INTERN,
-				NewPara);
-		}
-
-		/* Inform the world that link protocol is up. */
-		netif_carrier_on(dev);
-		break;
-	}
-	case SK_DRV_NET_DOWN:	 /* SK_U32 Reason */
-		/* action list 7 */
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("NET DOWN EVENT "));
-		if (DoPrintInterfaceChange) {
-			printk("%s: network connection down\n", 
-				pAC->dev[Param.Para32[1]]->name);
-		} else {
-			DoPrintInterfaceChange = SK_TRUE;
-		}
-		netif_carrier_off(pAC->dev[Param.Para32[1]]);
-		break;
-	case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("PORT SWITCH HARD "));
-	case SK_DRV_SWITCH_SOFT: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
-	/* action list 6 */
-		printk("%s: switching to port %c\n", pAC->dev[0]->name,
-			'A'+Param.Para32[1]);
-	case SK_DRV_SWITCH_INTERN: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */
-		FromPort = Param.Para32[0];
-		ToPort = Param.Para32[1];
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("PORT SWITCH EVENT, From: %d  To: %d (Pref %d) ",
-			FromPort, ToPort, pAC->Rlmt.Net[0].PrefPort));
-		NewPara.Para64 = FromPort;
-		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
-		NewPara.Para64 = ToPort;
-		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara);
-		spin_lock_irqsave(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-		spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
-		SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST);
-		SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST);
-		spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
-		spin_unlock_irqrestore(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-
-		ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */
-		ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */
-		
-		ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]);
-		ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]);
-		spin_lock_irqsave(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-		spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
-		pAC->ActivePort = ToPort;
-#if 0
-		SetQueueSizes(pAC);
-#else
-		/* tschilling: New common function with minimum size check. */
-		DualNet = SK_FALSE;
-		if (pAC->RlmtNets == 2) {
-			DualNet = SK_TRUE;
-		}
-		
-		if (SkGeInitAssignRamToQueues(
-			pAC,
-			pAC->ActivePort,
-			DualNet)) {
-			spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
-			spin_unlock_irqrestore(
-				&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-				Flags);
-			printk("SkGeInitAssignRamToQueues failed.\n");
-			break;
-		}
-#endif
-		/* tschilling: Handling of return values inserted. */
-		if (SkGeInitPort(pAC, IoC, FromPort) ||
-			SkGeInitPort(pAC, IoC, ToPort)) {
-			printk("%s: SkGeInitPort failed.\n", pAC->dev[0]->name);
-		}
-		if (Event == SK_DRV_SWITCH_SOFT) {
-			SkMacRxTxEnable(pAC, IoC, FromPort);
-		}
-		SkMacRxTxEnable(pAC, IoC, ToPort);
-		SkAddrSwap(pAC, IoC, FromPort, ToPort);
-		SkAddrMcUpdate(pAC, IoC, FromPort);
-		SkAddrMcUpdate(pAC, IoC, ToPort);
-		PortReInitBmu(pAC, FromPort);
-		PortReInitBmu(pAC, ToPort);
-		SkGePollTxD(pAC, IoC, FromPort, SK_TRUE);
-		SkGePollTxD(pAC, IoC, ToPort, SK_TRUE);
-		ClearAndStartRx(pAC, FromPort);
-		ClearAndStartRx(pAC, ToPort);
-		spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock);
-		spin_unlock_irqrestore(
-			&pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock,
-			Flags);
-		break;
-	case SK_DRV_RLMT_SEND:	 /* SK_MBUF *pMb */
-		SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-			("RLS "));
-		pRlmtMbuf = (SK_MBUF*) Param.pParaPtr;
-		pMsg = (struct sk_buff*) pRlmtMbuf->pOs;
-		skb_put(pMsg, pRlmtMbuf->Length);
-		if (XmitFrame(pAC, &pAC->TxPort[pRlmtMbuf->PortIdx][TX_PRIO_LOW],
-			pMsg) < 0)
-
-			DEV_KFREE_SKB_ANY(pMsg);
-		break;
-	case SK_DRV_TIMER:
-		if (Param.Para32[0] == SK_DRV_MODERATION_TIMER) {
-			/*
-			** expiration of the moderation timer implies that
-			** dynamic moderation is to be applied
-			*/
-			SkDimStartModerationTimer(pAC);
-			SkDimModerate(pAC);
-                        if (pAC->DynIrqModInfo.DisplayStats) {
-			    SkDimDisplayModerationSettings(pAC);
-                        }
-                } else if (Param.Para32[0] == SK_DRV_RX_CLEANUP_TIMER) {
-			/*
-			** check if we need to check for descriptors which
-			** haven't been handled the last millisecs
-			*/
-			StartDrvCleanupTimer(pAC);
-			if (pAC->GIni.GIMacsFound == 2) {
-				ReceiveIrq(pAC, &pAC->RxPort[1], SK_FALSE);
-			}
-			ReceiveIrq(pAC, &pAC->RxPort[0], SK_FALSE);
-		} else {
-			printk("Expiration of unknown timer\n");
-		}
-		break;
-	default:
-		break;
-	}
-	SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
-		("END EVENT "));
-	
-	return (0);
-} /* SkDrvEvent */
-
-
-/*****************************************************************************
- *
- *	SkErrorLog - log errors
- *
- * Description:
- *	This function logs errors to the system buffer and to the console
- *
- * Returns:
- *	0 if everything ok
- *	< 0  on error
- *	
- */
-void SkErrorLog(
-SK_AC	*pAC,
-int	ErrClass,
-int	ErrNum,
-char	*pErrorMsg)
-{
-char	ClassStr[80];
-
-	switch (ErrClass) {
-	case SK_ERRCL_OTHER:
-		strcpy(ClassStr, "Other error");
-		break;
-	case SK_ERRCL_CONFIG:
-		strcpy(ClassStr, "Configuration error");
-		break;
-	case SK_ERRCL_INIT:
-		strcpy(ClassStr, "Initialization error");
-		break;
-	case SK_ERRCL_NORES:
-		strcpy(ClassStr, "Out of resources error");
-		break;
-	case SK_ERRCL_SW:
-		strcpy(ClassStr, "internal Software error");
-		break;
-	case SK_ERRCL_HW:
-		strcpy(ClassStr, "Hardware failure");
-		break;
-	case SK_ERRCL_COMM:
-		strcpy(ClassStr, "Communication error");
-		break;
-	}
-	printk(KERN_INFO "%s: -- ERROR --\n        Class:  %s\n"
-		"        Nr:  0x%x\n        Msg:  %s\n", pAC->dev[0]->name,
-		ClassStr, ErrNum, pErrorMsg);
-
-} /* SkErrorLog */
-
-#ifdef SK_DIAG_SUPPORT
-
-/*****************************************************************************
- *
- *	SkDrvEnterDiagMode - handles DIAG attach request
- *
- * Description:
- *	Notify the kernel to NOT access the card any longer due to DIAG
- *	Deinitialize the Card
- *
- * Returns:
- *	int
- */
-int SkDrvEnterDiagMode(
-SK_AC   *pAc)   /* pointer to adapter context */
-{
-	DEV_NET *pNet = netdev_priv(pAc->dev[0]);
-	SK_AC   *pAC  = pNet->pAC;
-
-	SK_MEMCPY(&(pAc->PnmiBackup), &(pAc->PnmiStruct), 
-			sizeof(SK_PNMI_STRUCT_DATA));
-
-	pAC->DiagModeActive = DIAG_ACTIVE;
-	if (pAC->BoardLevel > SK_INIT_DATA) {
-		if (netif_running(pAC->dev[0])) {
-			pAC->WasIfUp[0] = SK_TRUE;
-			pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose      */
-			DoPrintInterfaceChange = SK_FALSE;
-			SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
-		} else {
-			pAC->WasIfUp[0] = SK_FALSE;
-		}
-		if (pNet != netdev_priv(pAC->dev[1])) {
-			pNet = netdev_priv(pAC->dev[1]);
-			if (netif_running(pAC->dev[1])) {
-				pAC->WasIfUp[1] = SK_TRUE;
-				pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
-				DoPrintInterfaceChange = SK_FALSE;
-				SkDrvDeInitAdapter(pAC, 1);  /* do SkGeClose  */
-			} else {
-				pAC->WasIfUp[1] = SK_FALSE;
-			}
-		}
-		pAC->BoardLevel = SK_INIT_DATA;
-	}
-	return(0);
-}
-
-/*****************************************************************************
- *
- *	SkDrvLeaveDiagMode - handles DIAG detach request
- *
- * Description:
- *	Notify the kernel to may access the card again after use by DIAG
- *	Initialize the Card
- *
- * Returns:
- * 	int
- */
-int SkDrvLeaveDiagMode(
-SK_AC   *pAc)   /* pointer to adapter control context */
-{ 
-	SK_MEMCPY(&(pAc->PnmiStruct), &(pAc->PnmiBackup), 
-			sizeof(SK_PNMI_STRUCT_DATA));
-	pAc->DiagModeActive    = DIAG_NOTACTIVE;
-	pAc->Pnmi.DiagAttached = SK_DIAG_IDLE;
-        if (pAc->WasIfUp[0] == SK_TRUE) {
-                pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
-		DoPrintInterfaceChange = SK_FALSE;
-                SkDrvInitAdapter(pAc, 0);    /* first device  */
-        }
-        if (pAc->WasIfUp[1] == SK_TRUE) {
-                pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
-		DoPrintInterfaceChange = SK_FALSE;
-                SkDrvInitAdapter(pAc, 1);    /* second device */
-        }
-	return(0);
-}
-
-/*****************************************************************************
- *
- *	ParseDeviceNbrFromSlotName - Evaluate PCI device number
- *
- * Description:
- * 	This function parses the PCI slot name information string and will
- *	retrieve the devcie number out of it. The slot_name maintianed by
- *	linux is in the form of '02:0a.0', whereas the first two characters 
- *	represent the bus number in hex (in the sample above this is 
- *	pci bus 0x02) and the next two characters the device number (0x0a).
- *
- * Returns:
- *	SK_U32: The device number from the PCI slot name
- */ 
-
-static SK_U32 ParseDeviceNbrFromSlotName(
-const char *SlotName)   /* pointer to pci slot name eg. '02:0a.0' */
-{
-	char	*CurrCharPos	= (char *) SlotName;
-	int	FirstNibble	= -1;
-	int	SecondNibble	= -1;
-	SK_U32	Result		=  0;
-
-	while (*CurrCharPos != '\0') {
-		if (*CurrCharPos == ':') { 
-			while (*CurrCharPos != '.') {
-				CurrCharPos++;  
-				if (	(*CurrCharPos >= '0') && 
-					(*CurrCharPos <= '9')) {
-					if (FirstNibble == -1) {
-						/* dec. value for '0' */
-						FirstNibble = *CurrCharPos - 48;
-					} else {
-						SecondNibble = *CurrCharPos - 48;
-					}  
-				} else if (	(*CurrCharPos >= 'a') && 
-						(*CurrCharPos <= 'f')  ) {
-					if (FirstNibble == -1) {
-						FirstNibble = *CurrCharPos - 87; 
-					} else {
-						SecondNibble = *CurrCharPos - 87; 
-					}
-				} else {
-					Result = 0;
-				}
-			}
-
-			Result = FirstNibble;
-			Result = Result << 4; /* first nibble is higher one */
-			Result = Result | SecondNibble;
-		}
-		CurrCharPos++;   /* next character */
-	}
-	return (Result);
-}
-
-/****************************************************************************
- *
- *	SkDrvDeInitAdapter - deinitialize adapter (this function is only 
- *				called if Diag attaches to that card)
- *
- * Description:
- *	Close initialized adapter.
- *
- * Returns:
- *	0 - on success
- *	error code - on error
- */
-static int SkDrvDeInitAdapter(
-SK_AC   *pAC,		/* pointer to adapter context   */
-int      devNbr)	/* what device is to be handled */
-{
-	struct SK_NET_DEVICE *dev;
-
-	dev = pAC->dev[devNbr];
-
-	/* On Linux 2.6 the network driver does NOT mess with reference
-	** counts.  The driver MUST be able to be unloaded at any time
-	** due to the possibility of hotplug.
-	*/
-	if (SkGeClose(dev) != 0) {
-		return (-1);
-	}
-	return (0);
-
-} /* SkDrvDeInitAdapter() */
-
-/****************************************************************************
- *
- *	SkDrvInitAdapter - Initialize adapter (this function is only 
- *				called if Diag deattaches from that card)
- *
- * Description:
- *	Close initialized adapter.
- *
- * Returns:
- *	0 - on success
- *	error code - on error
- */
-static int SkDrvInitAdapter(
-SK_AC   *pAC,		/* pointer to adapter context   */
-int      devNbr)	/* what device is to be handled */
-{
-	struct SK_NET_DEVICE *dev;
-
-	dev = pAC->dev[devNbr];
-
-	if (SkGeOpen(dev) != 0) {
-		return (-1);
-	}
-
-	/*
-	** Use correct MTU size and indicate to kernel TX queue can be started
-	*/ 
-	if (SkGeChangeMtu(dev, dev->mtu) != 0) {
-		return (-1);
-	} 
-	return (0);
-
-} /* SkDrvInitAdapter */
-
-#endif
-
-#ifdef DEBUG
-/****************************************************************************/
-/* "debug only" section *****************************************************/
-/****************************************************************************/
-
-
-/*****************************************************************************
- *
- *	DumpMsg - print a frame
- *
- * Description:
- *	This function prints frames to the system logfile/to the console.
- *
- * Returns: N/A
- *	
- */
-static void DumpMsg(struct sk_buff *skb, char *str)
-{
-	int	msglen;
-
-	if (skb == NULL) {
-		printk("DumpMsg(): NULL-Message\n");
-		return;
-	}
-
-	if (skb->data == NULL) {
-		printk("DumpMsg(): Message empty\n");
-		return;
-	}
-
-	msglen = skb->len;
-	if (msglen > 64)
-		msglen = 64;
-
-	printk("--- Begin of message from %s , len %d (from %d) ----\n", str, msglen, skb->len);
-
-	DumpData((char *)skb->data, msglen);
-
-	printk("------- End of message ---------\n");
-} /* DumpMsg */
-
-
-
-/*****************************************************************************
- *
- *	DumpData - print a data area
- *
- * Description:
- *	This function prints a area of data to the system logfile/to the
- *	console.
- *
- * Returns: N/A
- *	
- */
-static void DumpData(char *p, int size)
-{
-register int    i;
-int	haddr, addr;
-char	hex_buffer[180];
-char	asc_buffer[180];
-char	HEXCHAR[] = "0123456789ABCDEF";
-
-	addr = 0;
-	haddr = 0;
-	hex_buffer[0] = 0;
-	asc_buffer[0] = 0;
-	for (i=0; i < size; ) {
-		if (*p >= '0' && *p <='z')
-			asc_buffer[addr] = *p;
-		else
-			asc_buffer[addr] = '.';
-		addr++;
-		asc_buffer[addr] = 0;
-		hex_buffer[haddr] = HEXCHAR[(*p & 0xf0) >> 4];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[*p & 0x0f];
-		haddr++;
-		hex_buffer[haddr] = ' ';
-		haddr++;
-		hex_buffer[haddr] = 0;
-		p++;
-		i++;
-		if (i%16 == 0) {
-			printk("%s  %s\n", hex_buffer, asc_buffer);
-			addr = 0;
-			haddr = 0;
-		}
-	}
-} /* DumpData */
-
-
-/*****************************************************************************
- *
- *	DumpLong - print a data area as long values
- *
- * Description:
- *	This function prints a area of data to the system logfile/to the
- *	console.
- *
- * Returns: N/A
- *	
- */
-static void DumpLong(char *pc, int size)
-{
-register int    i;
-int	haddr, addr;
-char	hex_buffer[180];
-char	asc_buffer[180];
-char	HEXCHAR[] = "0123456789ABCDEF";
-long	*p;
-int	l;
-
-	addr = 0;
-	haddr = 0;
-	hex_buffer[0] = 0;
-	asc_buffer[0] = 0;
-	p = (long*) pc;
-	for (i=0; i < size; ) {
-		l = (long) *p;
-		hex_buffer[haddr] = HEXCHAR[(l >> 28) & 0xf];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[(l >> 24) & 0xf];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[(l >> 20) & 0xf];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[(l >> 16) & 0xf];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[(l >> 12) & 0xf];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[(l >> 8) & 0xf];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[(l >> 4) & 0xf];
-		haddr++;
-		hex_buffer[haddr] = HEXCHAR[l & 0x0f];
-		haddr++;
-		hex_buffer[haddr] = ' ';
-		haddr++;
-		hex_buffer[haddr] = 0;
-		p++;
-		i++;
-		if (i%8 == 0) {
-			printk("%4x %s\n", (i-8)*4, hex_buffer);
-			haddr = 0;
-		}
-	}
-	printk("------------------------\n");
-} /* DumpLong */
-
-#endif
-
-static int __devinit skge_probe_one(struct pci_dev *pdev,
-		const struct pci_device_id *ent)
-{
-	SK_AC			*pAC;
-	DEV_NET			*pNet = NULL;
-	struct net_device	*dev = NULL;
-	static int boards_found = 0;
-	int error = -ENODEV;
-	int using_dac = 0;
-	char DeviceStr[80];
-
-	if (pci_enable_device(pdev))
-		goto out;
- 
-	/* Configure DMA attributes. */
-	if (sizeof(dma_addr_t) > sizeof(u32) &&
-	    !(error = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
-		using_dac = 1;
-		error = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
-		if (error < 0) {
-			printk(KERN_ERR "sk98lin %s unable to obtain 64 bit DMA "
-			       "for consistent allocations\n", pci_name(pdev));
-			goto out_disable_device;
-		}
-	} else {
-		error = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
-		if (error) {
-			printk(KERN_ERR "sk98lin %s no usable DMA configuration\n",
-			       pci_name(pdev));
-			goto out_disable_device;
-		}
-	}
-
- 	error = -ENOMEM;
- 	dev = alloc_etherdev(sizeof(DEV_NET));
- 	if (!dev) {
-		printk(KERN_ERR "sk98lin: unable to allocate etherdev "
-		       "structure!\n");
-		goto out_disable_device;
-	}
-
-	pNet = netdev_priv(dev);
-	pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL);
-	if (!pNet->pAC) {
-		printk(KERN_ERR "sk98lin: unable to allocate adapter "
-		       "structure!\n");
-		goto out_free_netdev;
-	}
-
-	pAC = pNet->pAC;
-	pAC->PciDev = pdev;
-
-	pAC->dev[0] = dev;
-	pAC->dev[1] = dev;
-	pAC->CheckQueue = SK_FALSE;
-
-	dev->irq = pdev->irq;
-
-	error = SkGeInitPCI(pAC);
-	if (error) {
-		printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error);
-		goto out_free_netdev;
-	}
-
-	SET_MODULE_OWNER(dev);
-	dev->open =		&SkGeOpen;
-	dev->stop =		&SkGeClose;
-	dev->hard_start_xmit =	&SkGeXmit;
-	dev->get_stats =	&SkGeStats;
-	dev->set_multicast_list = &SkGeSetRxMode;
-	dev->set_mac_address =	&SkGeSetMacAddr;
-	dev->do_ioctl =		&SkGeIoctl;
-	dev->change_mtu =	&SkGeChangeMtu;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller =	&SkGePollController;
-#endif
-	SET_NETDEV_DEV(dev, &pdev->dev);
-	SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
-
-	/* Use only if yukon hardware */
-	if (pAC->ChipsetType) {
-#ifdef USE_SK_TX_CHECKSUM
-		dev->features |= NETIF_F_IP_CSUM;
-#endif
-#ifdef SK_ZEROCOPY
-		dev->features |= NETIF_F_SG;
-#endif
-#ifdef USE_SK_RX_CHECKSUM
-		pAC->RxPort[0].RxCsum = 1;
-#endif
-	}
-
-	if (using_dac)
-		dev->features |= NETIF_F_HIGHDMA;
-
-	pAC->Index = boards_found++;
-
-	error = SkGeBoardInit(dev, pAC);
-	if (error)
-		goto out_free_netdev;
-
-	/* Read Adapter name from VPD */
-	if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) {
-		error = -EIO;
-		printk(KERN_ERR "sk98lin: Could not read VPD data.\n");
-		goto out_free_resources;
-	}
-
-	/* Register net device */
-	error = register_netdev(dev);
-	if (error) {
-		printk(KERN_ERR "sk98lin: Could not register device.\n");
-		goto out_free_resources;
-	}
-
-	/* Print adapter specific string from vpd */
-	printk("%s: %s\n", dev->name, DeviceStr);
-
-	/* Print configuration settings */
-	printk("      PrefPort:%c  RlmtMode:%s\n",
-		'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber,
-		(pAC->RlmtMode==0)  ? "Check Link State" :
-		((pAC->RlmtMode==1) ? "Check Link State" :
-		((pAC->RlmtMode==3) ? "Check Local Port" :
-		((pAC->RlmtMode==7) ? "Check Segmentation" :
-		((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error")))));
-
-	SkGeYellowLED(pAC, pAC->IoBase, 1);
-
-	memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
-	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
-	pNet->PortNr = 0;
-	pNet->NetNr  = 0;
-
-	boards_found++;
-
-	pci_set_drvdata(pdev, dev);
-
-	/* More then one port found */
-	if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
-		dev = alloc_etherdev(sizeof(DEV_NET));
-		if (!dev) {
-			printk(KERN_ERR "sk98lin: unable to allocate etherdev "
-				"structure!\n");
-			goto single_port;
-		}
-
-		pNet          = netdev_priv(dev);
-		pNet->PortNr  = 1;
-		pNet->NetNr   = 1;
-		pNet->pAC     = pAC;
-
-		dev->open               = &SkGeOpen;
-		dev->stop               = &SkGeClose;
-		dev->hard_start_xmit    = &SkGeXmit;
-		dev->get_stats          = &SkGeStats;
-		dev->set_multicast_list = &SkGeSetRxMode;
-		dev->set_mac_address    = &SkGeSetMacAddr;
-		dev->do_ioctl           = &SkGeIoctl;
-		dev->change_mtu         = &SkGeChangeMtu;
-		SET_NETDEV_DEV(dev, &pdev->dev);
-		SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
-
-		if (pAC->ChipsetType) {
-#ifdef USE_SK_TX_CHECKSUM
-			dev->features |= NETIF_F_IP_CSUM;
-#endif
-#ifdef SK_ZEROCOPY
-			dev->features |= NETIF_F_SG;
-#endif
-#ifdef USE_SK_RX_CHECKSUM
-			pAC->RxPort[1].RxCsum = 1;
-#endif
-		}
-
-		if (using_dac)
-			dev->features |= NETIF_F_HIGHDMA;
-
-		error = register_netdev(dev);
-		if (error) {
-			printk(KERN_ERR "sk98lin: Could not register device"
-			       " for second port. (%d)\n", error);
-			free_netdev(dev);
-			goto single_port;
-		}
-
-		pAC->dev[1]   = dev;
-		memcpy(&dev->dev_addr,
-		       &pAC->Addr.Net[1].CurrentMacAddress, 6);
-		memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
-		printk("%s: %s\n", dev->name, DeviceStr);
-		printk("      PrefPort:B  RlmtMode:Dual Check Link State\n");
-	}
-
-single_port:
-
-	/* Save the hardware revision */
-	pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
-		(pAC->GIni.GIPciHwRev & 0x0F);
-
-	/* Set driver globals */
-	pAC->Pnmi.pDriverFileName    = DRIVER_FILE_NAME;
-	pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE;
-
-	memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA));
-	memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA));
-
-	return 0;
-
- out_free_resources:
-	FreeResources(dev);
- out_free_netdev:
-	free_netdev(dev);
- out_disable_device:
-	pci_disable_device(pdev);
- out:
-	return error;
-}
-
-static void __devexit skge_remove_one(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-	struct net_device *otherdev = pAC->dev[1];
-
-	unregister_netdev(dev);
-
-	SkGeYellowLED(pAC, pAC->IoBase, 0);
-
-	if (pAC->BoardLevel == SK_INIT_RUN) {
-		SK_EVPARA EvPara;
-		unsigned long Flags;
-
-		/* board is still alive */
-		spin_lock_irqsave(&pAC->SlowPathLock, Flags);
-		EvPara.Para32[0] = 0;
-		EvPara.Para32[1] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
-		EvPara.Para32[0] = 1;
-		EvPara.Para32[1] = -1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara);
-		SkEventDispatcher(pAC, pAC->IoBase);
-		/* disable interrupts */
-		SK_OUT32(pAC->IoBase, B0_IMSK, 0);
-		SkGeDeInit(pAC, pAC->IoBase);
-		spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
-		pAC->BoardLevel = SK_INIT_DATA;
-		/* We do NOT check here, if IRQ was pending, of course*/
-	}
-
-	if (pAC->BoardLevel == SK_INIT_IO) {
-		/* board is still alive */
-		SkGeDeInit(pAC, pAC->IoBase);
-		pAC->BoardLevel = SK_INIT_DATA;
-	}
-
-	FreeResources(dev);
-	free_netdev(dev);
-	if (otherdev != dev)
-		free_netdev(otherdev);
-	kfree(pAC);
-}
-
-#ifdef CONFIG_PM
-static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-	struct net_device *otherdev = pAC->dev[1];
-
-	if (netif_running(dev)) {
-		netif_carrier_off(dev);
-		DoPrintInterfaceChange = SK_FALSE;
-		SkDrvDeInitAdapter(pAC, 0);  /* performs SkGeClose */
-		netif_device_detach(dev);
-	}
-	if (otherdev != dev) {
-		if (netif_running(otherdev)) {
-			netif_carrier_off(otherdev);
-			DoPrintInterfaceChange = SK_FALSE;
-			SkDrvDeInitAdapter(pAC, 1);  /* performs SkGeClose */
-			netif_device_detach(otherdev);
-		}
-	}
-
-	pci_save_state(pdev);
-	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
-	if (pAC->AllocFlag & SK_ALLOC_IRQ) {
-		free_irq(dev->irq, dev);
-	}
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
-	return 0;
-}
-
-static int skge_resume(struct pci_dev *pdev)
-{
-	struct net_device *dev = pci_get_drvdata(pdev);
-	DEV_NET *pNet = netdev_priv(dev);
-	SK_AC *pAC = pNet->pAC;
-	struct net_device *otherdev = pAC->dev[1];
-	int ret;
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	ret = pci_enable_device(pdev);
-	if (ret) {
-		printk(KERN_WARNING "sk98lin: unable to enable device %s "
-				"in resume\n", dev->name);
-		goto err_out;
-	}
-	pci_set_master(pdev);
-	if (pAC->GIni.GIMacsFound == 2)
-		ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev);
-	else
-		ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev);
-	if (ret) {
-		printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
-		ret = -EBUSY;
-		goto err_out_disable_pdev;
-	}
-
-	netif_device_attach(dev);
-	if (netif_running(dev)) {
-		DoPrintInterfaceChange = SK_FALSE;
-		SkDrvInitAdapter(pAC, 0);    /* first device  */
-	}
-	if (otherdev != dev) {
-		netif_device_attach(otherdev);
-		if (netif_running(otherdev)) {
-			DoPrintInterfaceChange = SK_FALSE;
-			SkDrvInitAdapter(pAC, 1);    /* second device  */
-		}
-	}
-
-	return 0;
-
-err_out_disable_pdev:
-	pci_disable_device(pdev);
-err_out:
-	pAC->AllocFlag &= ~SK_ALLOC_IRQ;
-	dev->irq = 0;
-	return ret;
-}
-#else
-#define skge_suspend NULL
-#define skge_resume NULL
-#endif
-
-static struct pci_device_id skge_pci_tbl[] = {
-	{ PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ PCI_VENDOR_ID_SYSKONNECT, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ PCI_VENDOR_ID_SYSKONNECT, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-/* DLink card does not have valid VPD so this driver gags
- *	{ PCI_VENDOR_ID_DLINK, 0x4c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- */
-	{ PCI_VENDOR_ID_MARVELL, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ PCI_VENDOR_ID_MARVELL, 0x5005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ PCI_VENDOR_ID_CNET, 0x434e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, },
-	{ PCI_VENDOR_ID_LINKSYS, 0x1064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, skge_pci_tbl);
-
-static struct pci_driver skge_driver = {
-	.name		= "sk98lin",
-	.id_table	= skge_pci_tbl,
-	.probe		= skge_probe_one,
-	.remove		= __devexit_p(skge_remove_one),
-	.suspend	= skge_suspend,
-	.resume		= skge_resume,
-};
-
-static int __init skge_init(void)
-{
-	printk(KERN_NOTICE "sk98lin: driver has been replaced by the skge driver"
-	       " and is scheduled for removal\n");
-
-	return pci_register_driver(&skge_driver);
-}
-
-static void __exit skge_exit(void)
-{
-	pci_unregister_driver(&skge_driver);
-}
-
-module_init(skge_init);
-module_exit(skge_exit);
diff --git a/drivers/net/sk98lin/skgehwt.c b/drivers/net/sk98lin/skgehwt.c
deleted file mode 100644
index db670993c2df..000000000000
--- a/drivers/net/sk98lin/skgehwt.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgehwt.c
- * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
- * Version:	$Revision: 1.15 $
- * Date:	$Date: 2003/09/16 13:41:23 $
- * Purpose:	Hardware Timer
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- *	Event queue and dispatcher
- */
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skgehwt.c,v 1.15 2003/09/16 13:41:23 rschmidt Exp $ (C) Marvell.";
-#endif
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
-
-#ifdef __C2MAN__
-/*
- *   Hardware Timer function queue management.
- */
-intro()
-{}
-#endif
-
-/*
- * Prototypes of local functions.
- */
-#define	SK_HWT_MAX	(65000)
-
-/* correction factor */
-#define	SK_HWT_FAC	(1000 * (SK_U32)pAC->GIni.GIHstClkFact / 100)
-
-/*
- * Initialize hardware timer.
- *
- * Must be called during init level 1.
- */
-void	SkHwtInit(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	Ioc)	/* IoContext */
-{
-	pAC->Hwt.TStart = 0 ;
-	pAC->Hwt.TStop	= 0 ;
-	pAC->Hwt.TActive = SK_FALSE;
-
-	SkHwtStop(pAC, Ioc);
-}
-
-/*
- *
- * Start hardware timer (clock ticks are 16us).
- *
- */
-void	SkHwtStart(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	Ioc,	/* IoContext */
-SK_U32	Time)	/* Time in units of 16us to load the timer with. */
-{
-	SK_U32	Cnt;
-
-	if (Time > SK_HWT_MAX)
-		Time = SK_HWT_MAX;
-
-	pAC->Hwt.TStart = Time;
-	pAC->Hwt.TStop = 0L;
-
-	Cnt = Time;
-
-	/*
-	 * if time < 16 us
-	 *	time = 16 us
-	 */
-	if (!Cnt) {
-		Cnt++;
-	}
-
-	SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC);
-	
-	SK_OUT16(Ioc, B2_TI_CTRL, TIM_START);	/* Start timer. */
-
-	pAC->Hwt.TActive = SK_TRUE;
-}
-
-/*
- * Stop hardware timer.
- * and clear the timer IRQ
- */
-void	SkHwtStop(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	Ioc)	/* IoContext */
-{
-	SK_OUT16(Ioc, B2_TI_CTRL, TIM_STOP);
-	
-	SK_OUT16(Ioc, B2_TI_CTRL, TIM_CLR_IRQ);
-
-	pAC->Hwt.TActive = SK_FALSE;
-}
-
-
-/*
- *	Stop hardware timer and read time elapsed since last start.
- *
- * returns
- *	The elapsed time since last start in units of 16us.
- *
- */
-SK_U32	SkHwtRead(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	Ioc)	/* IoContext */
-{
-	SK_U32	TRead;
-	SK_U32	IStatus;
-
-	if (pAC->Hwt.TActive) {
-		
-		SkHwtStop(pAC, Ioc);
-
-		SK_IN32(Ioc, B2_TI_VAL, &TRead);
-		TRead /= SK_HWT_FAC;
-
-		SK_IN32(Ioc, B0_ISRC, &IStatus);
-
-		/* Check if timer expired (or wraped around) */
-		if ((TRead > pAC->Hwt.TStart) || (IStatus & IS_TIMINT)) {
-			
-			SkHwtStop(pAC, Ioc);
-			
-			pAC->Hwt.TStop = pAC->Hwt.TStart;
-		}
-		else {
-			
-			pAC->Hwt.TStop = pAC->Hwt.TStart - TRead;
-		}
-	}
-	return(pAC->Hwt.TStop);
-}
-
-/*
- * interrupt source= timer
- */
-void	SkHwtIsr(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	Ioc)	/* IoContext */
-{
-	SkHwtStop(pAC, Ioc);
-	
-	pAC->Hwt.TStop = pAC->Hwt.TStart;
-	
-	SkTimerDone(pAC, Ioc);
-}
-
-/* End of file */
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
deleted file mode 100644
index 67f1d6a5c15d..000000000000
--- a/drivers/net/sk98lin/skgeinit.c
+++ /dev/null
@@ -1,2005 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgeinit.c
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.97 $
- * Date:	$Date: 2003/10/02 16:45:31 $
- * Purpose:	Contains functions to initialize the adapter
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* global variables ***********************************************************/
-
-/* local variables ************************************************************/
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skgeinit.c,v 1.97 2003/10/02 16:45:31 rschmidt Exp $ (C) Marvell.";
-#endif
-
-struct s_QOffTab {
-	int	RxQOff;		/* Receive Queue Address Offset */
-	int	XsQOff;		/* Sync Tx Queue Address Offset */
-	int	XaQOff;		/* Async Tx Queue Address Offset */
-};
-static struct s_QOffTab QOffTab[] = {
-	{Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2}
-};
-
-struct s_Config {
-	char	ScanString[8];
-	SK_U32	Value;
-};
-
-static struct s_Config OemConfig = {
-	{'O','E','M','_','C','o','n','f'},
-#ifdef SK_OEM_CONFIG
-	OEM_CONFIG_VALUE,
-#else
-	0,
-#endif
-};
-
-/******************************************************************************
- *
- *	SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
- *
- * Description:
- *	Enable or disable the descriptor polling of the transmit descriptor
- *	ring(s) (TxD) for port 'Port'.
- *	The new configuration is *not* saved over any SkGeStopPort() and
- *	SkGeInitPort() calls.
- *
- * Returns:
- *	nothing
- */
-void SkGePollTxD(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL PollTxD)	/* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
-{
-	SK_GEPORT *pPrt;
-	SK_U32	DWord;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	DWord = (SK_U32)(PollTxD ? CSR_ENA_POL : CSR_DIS_POL);
-
-	if (pPrt->PXSQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord);
-	}
-	
-	if (pPrt->PXAQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord);
-	}
-}	/* SkGePollTxD */
-
-
-/******************************************************************************
- *
- *	SkGeYellowLED() - Switch the yellow LED on or off.
- *
- * Description:
- *	Switch the yellow LED on or off.
- *
- * Note:
- *	This function may be called any time after SkGeInit(Level 1).
- *
- * Returns:
- *	nothing
- */
-void SkGeYellowLED(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		State)		/* yellow LED state, 0 = OFF, 0 != ON */
-{
-	if (State == 0) {
-		/* Switch yellow LED OFF */
-		SK_OUT8(IoC, B0_LED, LED_STAT_OFF);
-	}
-	else {
-		/* Switch yellow LED ON */
-		SK_OUT8(IoC, B0_LED, LED_STAT_ON);
-	}
-}	/* SkGeYellowLED */
-
-
-#if (!defined(SK_SLIM) || defined(GENESIS))
-/******************************************************************************
- *
- *	SkGeXmitLED() - Modify the Operational Mode of a transmission LED.
- *
- * Description:
- *	The Rx or Tx LED which is specified by 'Led' will be
- *	enabled, disabled or switched on in test mode.
- *
- * Note:
- *	'Led' must contain the address offset of the LEDs INI register.
- *
- * Usage:
- *	SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
- *
- * Returns:
- *	nothing
- */
-void SkGeXmitLED(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Led,		/* offset to the LED Init Value register */
-int		Mode)		/* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
-{
-	SK_U32	LedIni;
-
-	switch (Mode) {
-	case SK_LED_ENA:
-		LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
-		SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni);
-		SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
-		break;
-	case SK_LED_TST:
-		SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON);
-		SK_OUT32(IoC, Led + XMIT_LED_CNT, 100);
-		SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
-		break;
-	case SK_LED_DIS:
-	default:
-		/*
-		 * Do NOT stop the LED Timer here. The LED might be
-		 * in on state. But it needs to go off.
-		 */
-		SK_OUT32(IoC, Led + XMIT_LED_CNT, 0);
-		SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF);
-		break;
-	}
-			
-	/*
-	 * 1000BT: The Transmit LED is driven by the PHY.
-	 * But the default LED configuration is used for
-	 * Level One and Broadcom PHYs.
-	 * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.)
-	 * (In this case it has to be added here. But we will see. XXX)
-	 */
-}	/* SkGeXmitLED */
-#endif	/* !SK_SLIM || GENESIS */
-
-
-/******************************************************************************
- *
- *	DoCalcAddr() - Calculates the start and the end address of a queue.
- *
- * Description:
- *	This function calculates the start and the end address of a queue.
- *  Afterwards the 'StartVal' is incremented to the next start position.
- *	If the port is already initialized the calculated values
- *	will be checked against the configured values and an
- *	error will be returned, if they are not equal.
- *	If the port is not initialized the values will be written to
- *	*StartAdr and *EndAddr.
- *
- * Returns:
- *	0:	success
- *	1:	configuration error
- */
-static int DoCalcAddr(
-SK_AC		*pAC, 				/* adapter context */
-SK_GEPORT	SK_FAR *pPrt,		/* port index */
-int			QuSize,				/* size of the queue to configure in kB */
-SK_U32		SK_FAR *StartVal,	/* start value for address calculation */
-SK_U32		SK_FAR *QuStartAddr,/* start addr to calculate */
-SK_U32		SK_FAR *QuEndAddr)	/* end address to calculate */
-{
-	SK_U32	EndVal;
-	SK_U32	NextStart;
-	int		Rtv;
-
-	Rtv = 0;
-	if (QuSize == 0) {
-		EndVal = *StartVal;
-		NextStart = EndVal;
-	}
-	else {
-		EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1;
-		NextStart = EndVal + 1;
-	}
-
-	if (pPrt->PState >= SK_PRT_INIT) {
-		if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) {
-			Rtv = 1;
-		}
-	}
-	else {
-		*QuStartAddr = *StartVal;
-		*QuEndAddr = EndVal;
-	}
-
-	*StartVal = NextStart;
-	return(Rtv);
-}	/* DoCalcAddr */
-
-/******************************************************************************
- *
- *	SkGeInitAssignRamToQueues() - allocate default queue sizes
- *
- * Description:
- *	This function assigns the memory to the different queues and ports.
- *	When DualNet is set to SK_TRUE all ports get the same amount of memory.
- *  Otherwise the first port gets most of the memory and all the
- *	other ports just the required minimum.
- *	This function can only be called when pAC->GIni.GIRamSize and
- *	pAC->GIni.GIMacsFound have been initialized, usually this happens
- *	at init level 1
- *
- * Returns:
- *	0 - ok
- *	1 - invalid input values
- *	2 - not enough memory
- */
-
-int SkGeInitAssignRamToQueues(
-SK_AC	*pAC,			/* Adapter context */
-int		ActivePort,		/* Active Port in RLMT mode */
-SK_BOOL	DualNet)		/* adapter context */
-{
-	int	i;
-	int	UsedKilobytes;			/* memory already assigned */
-	int	ActivePortKilobytes;	/* memory available for active port */
-	SK_GEPORT *pGePort;
-
-	UsedKilobytes = 0;
-
-	if (ActivePort >= pAC->GIni.GIMacsFound) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-			("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n",
-			ActivePort));
-		return(1);
-	}
-	if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) +
-		((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-			("SkGeInitAssignRamToQueues: Not enough memory (%d)\n",
-			 pAC->GIni.GIRamSize));
-		return(2);
-	}
-
-	if (DualNet) {
-		/* every port gets the same amount of memory */
-		ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound;
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
-			pGePort = &pAC->GIni.GP[i];
-			
-			/* take away the minimum memory for active queues */
-			ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
-
-			/* receive queue gets the minimum + 80% of the rest */
-			pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((
-				ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100))
-				+ SK_MIN_RXQ_SIZE;
-
-			ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
-
-			/* synchronous transmit queue */
-			pGePort->PXSQSize = 0;
-
-			/* asynchronous transmit queue */
-			pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes +
-				SK_MIN_TXQ_SIZE);
-		}
-	}
-	else {	
-		/* Rlmt Mode or single link adapter */
-
-		/* Set standby queue size defaults for all standby ports */
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
-			if (i != ActivePort) {
-				pGePort = &pAC->GIni.GP[i];
-
-				pGePort->PRxQSize = SK_MIN_RXQ_SIZE;
-				pGePort->PXAQSize = SK_MIN_TXQ_SIZE;
-				pGePort->PXSQSize = 0;
-
-				/* Count used RAM */
-				UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize;
-			}
-		}
-		/* what's left? */
-		ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes;
-
-		/* assign it to the active port */
-		/* first take away the minimum memory */
-		ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
-		pGePort = &pAC->GIni.GP[ActivePort];
-
-		/* receive queue get's the minimum + 80% of the rest */
-		pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes *
-			(unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE;
-
-		ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
-
-		/* synchronous transmit queue */
-		pGePort->PXSQSize = 0;
-
-		/* asynchronous transmit queue */
-		pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) +
-			SK_MIN_TXQ_SIZE;
-	}
-#ifdef VCPU
-	VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n",
-		pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize);
-#endif /* VCPU */
-
-	return(0);
-}	/* SkGeInitAssignRamToQueues */
-
-/******************************************************************************
- *
- *	SkGeCheckQSize() - Checks the Adapters Queue Size Configuration
- *
- * Description:
- *	This function verifies the Queue Size Configuration specified
- *	in the variables PRxQSize, PXSQSize, and PXAQSize of all
- *	used ports.
- *	This requirements must be fullfilled to have a valid configuration:
- *		- The size of all queues must not exceed GIRamSize.
- *		- The queue sizes must be specified in units of 8 kB.
- *		- The size of Rx queues of available ports must not be
- *		  smaller than 16 kB.
- *		- The size of at least one Tx queue (synch. or asynch.)
- *        of available ports must not be smaller than 16 kB
- *        when Jumbo Frames are used.
- *		- The RAM start and end addresses must not be changed
- *		  for ports which are already initialized.
- *	Furthermore SkGeCheckQSize() defines the Start and End Addresses
- *  of all ports and stores them into the HWAC port	structure.
- *
- * Returns:
- *	0:	Queue Size Configuration valid
- *	1:	Queue Size Configuration invalid
- */
-static int SkGeCheckQSize(
-SK_AC	 *pAC,		/* adapter context */
-int		 Port)		/* port index */
-{
-	SK_GEPORT *pPrt;
-	int	i;
-	int	Rtv;
-	int	Rtv2;
-	SK_U32	StartAddr;
-#ifndef SK_SLIM
-	int	UsedMem;	/* total memory used (max. found ports) */
-#endif	
-
-	Rtv = 0;
-	
-#ifndef SK_SLIM
-
-	UsedMem = 0;
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		pPrt = &pAC->GIni.GP[i];
-
-		if ((pPrt->PRxQSize & QZ_UNITS) != 0 ||
-			(pPrt->PXSQSize & QZ_UNITS) != 0 ||
-			(pPrt->PXAQSize & QZ_UNITS) != 0) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
-			return(1);
-		}
-
-		if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) {
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG);
-			return(1);
-		}
-		
-		/*
-		 * the size of at least one Tx queue (synch. or asynch.) has to be > 0.
-		 * if Jumbo Frames are used, this size has to be >= 16 kB.
-		 */
-		if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) ||
-			(pAC->GIni.GIPortUsage == SK_JUMBO_LINK &&
-            ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) ||
-			 (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) {
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG);
-				return(1);
-		}
-		
-		UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize;
-	}
-	
-	if (UsedMem > pAC->GIni.GIRamSize) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
-		return(1);
-	}
-#endif	/* !SK_SLIM */
-
-	/* Now start address calculation */
-	StartAddr = pAC->GIni.GIRamOffs;
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		pPrt = &pAC->GIni.GP[i];
-
-		/* Calculate/Check values for the receive queue */
-		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr,
-			&pPrt->PRxQRamStart, &pPrt->PRxQRamEnd);
-		Rtv |= Rtv2;
-
-		/* Calculate/Check values for the synchronous Tx queue */
-		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr,
-			&pPrt->PXsQRamStart, &pPrt->PXsQRamEnd);
-		Rtv |= Rtv2;
-
-		/* Calculate/Check values for the asynchronous Tx queue */
-		Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr,
-			&pPrt->PXaQRamStart, &pPrt->PXaQRamEnd);
-		Rtv |= Rtv2;
-
-		if (Rtv) {
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG);
-			return(1);
-		}
-	}
-
-	return(0);
-}	/* SkGeCheckQSize */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkGeInitMacArb() - Initialize the MAC Arbiter
- *
- * Description:
- *	This function initializes the MAC Arbiter.
- *	It must not be called if there is still an
- *	initialized or active port.
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitMacArb(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	/* release local reset */
-	SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR);
-
-	/* configure timeout values */
-	SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53);
-	SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53);
-	SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53);
-	SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53);
-
-	SK_OUT8(IoC, B3_MA_RCINI_RX1, 0);
-	SK_OUT8(IoC, B3_MA_RCINI_RX2, 0);
-	SK_OUT8(IoC, B3_MA_RCINI_TX1, 0);
-	SK_OUT8(IoC, B3_MA_RCINI_TX2, 0);
-
-	/* recovery values are needed for XMAC II Rev. B2 only */
-	/* Fast Output Enable Mode was intended to use with Rev. B2, but now? */
-
-	/*
-	 * There is no start or enable button to push, therefore
-	 * the MAC arbiter is configured and enabled now.
-	 */
-}	/* SkGeInitMacArb */
-
-
-/******************************************************************************
- *
- *	SkGeInitPktArb() - Initialize the Packet Arbiter
- *
- * Description:
- *	This function initializes the Packet Arbiter.
- *	It must not be called if there is still an
- *	initialized or active port.
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitPktArb(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	/* release local reset */
-	SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR);
-
-	/* configure timeout values */
-	SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
-	SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
-	SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
-	SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
-
-	/*
-	 * enable timeout timers if jumbo frames not used
-	 * NOTE: the packet arbiter timeout interrupt is needed for
-	 * half duplex hangup workaround
-	 */
-	if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) {
-		if (pAC->GIni.GIMacsFound == 1) {
-			SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1);
-		}
-		else {
-			SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2);
-		}
-	}
-}	/* SkGeInitPktArb */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- *	SkGeInitMacFifo() - Initialize the MAC FIFOs
- *
- * Description:
- *	Initialize all MAC FIFOs of the specified port
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitMacFifo(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_U16	Word;
-#ifdef VCPU
-	SK_U32	DWord;
-#endif /* VCPU */
-	/*
-	 * For each FIFO:
-	 *	- release local reset
-	 *	- use default value for MAC FIFO size
-	 *	- setup defaults for the control register
-	 *	- enable the FIFO
-	 */
-	
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		/* Configure Rx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF);
-		SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
-	
-		/* Configure Tx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
-		SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
-	
-		/* Enable frame flushing if jumbo frames used */
-		if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
-			SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* set Rx GMAC FIFO Flush Mask */
-		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
-		
-		Word = (SK_U16)GMF_RX_CTRL_DEF;
-
-		/* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */
-		if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
-
-			Word &= ~GMF_RX_F_FL_ON;
-		}
-		
-		/* Configure Rx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word);
-		
-		/* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */
-		SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
-		
-		/* Configure Tx MAC FIFO */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
-		SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF);
-		
-#ifdef VCPU
-		SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord);
-		SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord);
-#endif /* VCPU */
-		
-		/* set Tx GMAC FIFO Almost Empty Threshold */
-/*		SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */
-	}
-#endif /* YUKON */
-
-}	/* SkGeInitMacFifo */
-
-#ifdef	SK_LNK_SYNC_CNT
-/******************************************************************************
- *
- *	SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting
- *
- * Description:
- *	This function starts the Link Sync Counter of the specified
- *	port and enables the generation of an Link Sync IRQ.
- *	The Link Sync Counter may be used to detect an active link,
- *	if autonegotiation is not used.
- *
- * Note:
- *	o To ensure receiving the Link Sync Event the LinkSyncCounter
- *	  should be initialized BEFORE clearing the XMAC's reset!
- *	o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this
- *	  function.
- *
- * Returns:
- *	nothing
- */
-void SkGeLoadLnkSyncCnt(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U32	CntVal)		/* Counter value */
-{
-	SK_U32	OrgIMsk;
-	SK_U32	NewIMsk;
-	SK_U32	ISrc;
-	SK_BOOL	IrqPend;
-
-	/* stop counter */
-	SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP);
-
-	/*
-	 * ASIC problem:
-	 * Each time starting the Link Sync Counter an IRQ is generated
-	 * by the adapter. See problem report entry from 21.07.98
-	 *
-	 * Workaround:	Disable Link Sync IRQ and clear the unexpeced IRQ
-	 *		if no IRQ is already pending.
-	 */
-	IrqPend = SK_FALSE;
-	SK_IN32(IoC, B0_ISRC, &ISrc);
-	SK_IN32(IoC, B0_IMSK, &OrgIMsk);
-	if (Port == MAC_1) {
-		NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1;
-		if ((ISrc & IS_LNK_SYNC_M1) != 0) {
-			IrqPend = SK_TRUE;
-		}
-	}
-	else {
-		NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2;
-		if ((ISrc & IS_LNK_SYNC_M2) != 0) {
-			IrqPend = SK_TRUE;
-		}
-	}
-	if (!IrqPend) {
-		SK_OUT32(IoC, B0_IMSK, NewIMsk);
-	}
-
-	/* load counter */
-	SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal);
-
-	/* start counter */
-	SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START);
-
-	if (!IrqPend) {
-		/* clear the unexpected IRQ, and restore the interrupt mask */
-		SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ);
-		SK_OUT32(IoC, B0_IMSK, OrgIMsk);
-	}
-}	/* SkGeLoadLnkSyncCnt*/
-#endif	/* SK_LNK_SYNC_CNT */
-
-#if defined(SK_DIAG) || defined(SK_CFG_SYNC)
-/******************************************************************************
- *
- *	SkGeCfgSync() - Configure synchronous bandwidth for this port.
- *
- * Description:
- *	This function may be used to configure synchronous bandwidth
- *	to the specified port. This may be done any time after
- *	initializing the port. The configuration values are NOT saved
- *	in the HWAC port structure and will be overwritten any
- *	time when stopping and starting the port.
- *	Any values for the synchronous configuration will be ignored
- *	if the size of the synchronous queue is zero!
- *
- *	The default configuration for the synchronous service is
- *	TXA_ENA_FSYNC. This means if the size of
- *	the synchronous queue is unequal zero but no specific
- *	synchronous bandwidth is configured, the synchronous queue
- *	will always have the 'unlimited' transmit priority!
- *
- *	This mode will be restored if the synchronous bandwidth is
- *	deallocated ('IntTime' = 0 and 'LimCount' = 0).
- *
- * Returns:
- *	0:	success
- *	1:	parameter configuration error
- *	2:	try to configure quality of service although no
- *		synchronous queue is configured
- */
-int SkGeCfgSync(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U32	IntTime,	/* Interval Timer Value in units of 8ns */
-SK_U32	LimCount,	/* Number of bytes to transfer during IntTime */
-int		SyncMode)	/* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */
-{
-	int Rtv;
-
-	Rtv = 0;
-
-	/* check the parameters */
-	if (LimCount > IntTime ||
-		(LimCount == 0 && IntTime != 0) ||
-		(LimCount != 0 && IntTime == 0)) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
-		return(1);
-	}
-	
-	if (pAC->GIni.GP[Port].PXSQSize == 0) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG);
-		return(2);
-	}
-	
-	/* calculate register values */
-	IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100;
-	LimCount = LimCount / 8;
-	
-	if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
-		return(1);
-	}
-
-	/*
-	 * - Enable 'Force Sync' to ensure the synchronous queue
-	 *   has the priority while configuring the new values.
-	 * - Also 'disable alloc' to ensure the settings complies
-	 *   to the SyncMode parameter.
-	 * - Disable 'Rate Control' to configure the new values.
-	 * - write IntTime and LimCount
-	 * - start 'Rate Control' and disable 'Force Sync'
-	 *   if Interval Timer or Limit Counter not zero.
-	 */
-	SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
-		TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-	
-	SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime);
-	SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount);
-	
-	SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
-		(SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC)));
-	
-	if (IntTime != 0 || LimCount != 0) {
-		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC);
-	}
-
-	return(0);
-}	/* SkGeCfgSync */
-#endif /* SK_DIAG || SK_CFG_SYNC*/
-
-
-/******************************************************************************
- *
- *	DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue
- *
- * Desccription:
- *	If the queue is used, enable and initialize it.
- *	Make sure the queue is still reset, if it is not used.
- *
- * Returns:
- *	nothing
- */
-static void DoInitRamQueue(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* IO context */
-int		QuIoOffs,		/* Queue IO Address Offset */
-SK_U32	QuStartAddr,	/* Queue Start Address */
-SK_U32	QuEndAddr,		/* Queue End Address */
-int		QuType)			/* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */
-{
-	SK_U32	RxUpThresVal;
-	SK_U32	RxLoThresVal;
-
-	if (QuStartAddr != QuEndAddr) {
-		/* calculate thresholds, assume we have a big Rx queue */
-		RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8;
-		RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8;
-
-		/* build HW address format */
-		QuStartAddr = QuStartAddr / 8;
-		QuEndAddr = QuEndAddr / 8;
-
-		/* release local reset */
-		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR);
-
-		/* configure addresses */
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr);
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr);
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr);
-		SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr);
-
-		switch (QuType) {
-		case SK_RX_SRAM_Q:
-			/* configure threshold for small Rx Queue */
-			RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8;
-
-			/* continue with SK_RX_BRAM_Q */
-		case SK_RX_BRAM_Q:
-			/* write threshold for Rx Queue */
-
-			SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal);
-			SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal);
-
-			/* the high priority threshold not used */
-			break;
-		case SK_TX_RAM_Q:
-			/*
-			 * Do NOT use Store & Forward under normal operation due to
-			 * performance optimization (GENESIS only).
-			 * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB)
-			 * or YUKON is used ((GMAC Tx FIFO is only 1 kB)
-			 * we NEED Store & Forward of the RAM buffer.
-			 */
-			if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK ||
-				pAC->GIni.GIYukon) {
-				/* enable Store & Forward Mode for the Tx Side */
-				SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD);
-			}
-			break;
-		}
-
-		/* set queue operational */
-		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD);
-	}
-	else {
-		/* ensure the queue is still disabled */
-		SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET);
-	}
-}	/* DoInitRamQueue */
-
-
-/******************************************************************************
- *
- *	SkGeInitRamBufs() - Initialize the RAM Buffer Queues
- *
- * Description:
- *	Initialize all RAM Buffer Queues of the specified port
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitRamBufs(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT *pPrt;
-	int RxQType;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
-		RxQType = SK_RX_SRAM_Q; 	/* small Rx Queue */
-	}
-	else {
-		RxQType = SK_RX_BRAM_Q;		/* big Rx Queue */
-	}
-
-	DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart,
-		pPrt->PRxQRamEnd, RxQType);
-	
-	DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart,
-		pPrt->PXsQRamEnd, SK_TX_RAM_Q);
-	
-	DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart,
-		pPrt->PXaQRamEnd, SK_TX_RAM_Q);
-
-}	/* SkGeInitRamBufs */
-
-
-/******************************************************************************
- *
- *	SkGeInitRamIface() - Initialize the RAM Interface
- *
- * Description:
- *	This function initializes the Adapters RAM Interface.
- *
- * Note:
- *	This function is used in the diagnostics.
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitRamIface(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	/* release local reset */
-	SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR);
-
-	/* configure timeout values */
-	SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53);
-	SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53);
-
-}	/* SkGeInitRamIface */
-
-
-/******************************************************************************
- *
- *	SkGeInitBmu() - Initialize the BMU state machines
- *
- * Description:
- *	Initialize all BMU state machines of the specified port
- *
- * Returns:
- *	nothing
- */
-static void SkGeInitBmu(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U32		RxWm;
-	SK_U32		TxWm;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	RxWm = SK_BMU_RX_WM;
-	TxWm = SK_BMU_TX_WM;
-	
-	if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) {
-		/* for better performance */
-		RxWm /= 2;
-		TxWm /= 2;
-	}
-
-	/* Rx Queue: Release all local resets and set the watermark */
-	SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET);
-	SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm);
-
-	/*
-	 * Tx Queue: Release all local resets if the queue is used !
-	 * 		set watermark
-	 */
-	if (pPrt->PXSQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm);
-	}
-	
-	if (pPrt->PXAQSize != 0) {
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET);
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm);
-	}
-	/*
-	 * Do NOT enable the descriptor poll timers here, because
-	 * the descriptor addresses are not specified yet.
-	 */
-}	/* SkGeInitBmu */
-
-
-/******************************************************************************
- *
- *	TestStopBit() -	Test the stop bit of the queue
- *
- * Description:
- *	Stopping a queue is not as simple as it seems to be.
- *	If descriptor polling is enabled, it may happen
- *	that RX/TX stop is done and SV idle is NOT set.
- *	In this case we have to issue another stop command.
- *
- * Returns:
- *	The queues control status register
- */
-static SK_U32 TestStopBit(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		QuIoOffs)	/* Queue IO Address Offset */
-{
-	SK_U32	QuCsr;	/* CSR contents */
-
-	SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
-	
-	if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) {
-		/* Stop Descriptor overridden by start command */
-		SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP);
-
-		SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
-	}
-	
-	return(QuCsr);
-}	/* TestStopBit */
-
-
-/******************************************************************************
- *
- *	SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'.
- *
- * Description:
- *	After calling this function the descriptor rings and Rx and Tx
- *	queues of this port may be reconfigured.
- *
- *	It is possible to stop the receive and transmit path separate or
- *	both together.
- *
- *	Dir =	SK_STOP_TX 	Stops the transmit path only and resets the MAC.
- *				The receive queue is still active and
- *				the pending Rx frames may be still transferred
- *				into the RxD.
- *		SK_STOP_RX	Stop the receive path. The tansmit path
- *				has to be stopped once before.
- *		SK_STOP_ALL	SK_STOP_TX + SK_STOP_RX
- *
- *	RstMode = SK_SOFT_RST	Resets the MAC. The PHY is still alive.
- *			SK_HARD_RST	Resets the MAC and the PHY.
- *
- * Example:
- *	1) A Link Down event was signaled for a port. Therefore the activity
- *	of this port should be stopped and a hardware reset should be issued
- *	to enable the workaround of XMAC Errata #2. But the received frames
- *	should not be discarded.
- *		...
- *		SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST);
- *		(transfer all pending Rx frames)
- *		SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST);
- *		...
- *
- *	2) An event was issued which request the driver to switch
- *	the 'virtual active' link to an other already active port
- *	as soon as possible. The frames in the receive queue of this
- *	port may be lost. But the PHY must not be reset during this
- *	event.
- *		...
- *		SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST);
- *		...
- *
- * Extended Description:
- *	If SK_STOP_TX is set,
- *		o disable the MAC's receive and transmitter to prevent
- *		  from sending incomplete frames
- *		o stop the port's transmit queues before terminating the
- *		  BMUs to prevent from performing incomplete PCI cycles
- *		  on the PCI bus
- *		- The network Rx and Tx activity and PCI Tx transfer is
- *		  disabled now.
- *		o reset the MAC depending on the RstMode
- *		o Stop Interval Timer and Limit Counter of Tx Arbiter,
- *		  also disable Force Sync bit and Enable Alloc bit.
- *		o perform a local reset of the port's Tx path
- *			- reset the PCI FIFO of the async Tx queue
- *			- reset the PCI FIFO of the sync Tx queue
- *			- reset the RAM Buffer async Tx queue
- *			- reset the RAM Buffer sync Tx queue
- *			- reset the MAC Tx FIFO
- *		o switch Link and Tx LED off, stop the LED counters
- *
- *	If SK_STOP_RX is set,
- *		o stop the port's receive queue
- *		- The path data transfer activity is fully stopped now.
- *		o perform a local reset of the port's Rx path
- *			- reset the PCI FIFO of the Rx queue
- *			- reset the RAM Buffer receive queue
- *			- reset the MAC Rx FIFO
- *		o switch Rx LED off, stop the LED counter
- *
- *	If all ports are stopped,
- *		o reset the RAM Interface.
- *
- * Notes:
- *	o This function may be called during the driver states RESET_PORT and
- *	  SWITCH_PORT.
- */
-void SkGeStopPort(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* I/O context */
-int		Port,	/* port to stop (MAC_1 + n) */
-int		Dir,	/* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */
-int		RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */
-{
-#ifndef SK_DIAG
-	SK_EVPARA Para;
-#endif /* !SK_DIAG */
-	SK_GEPORT *pPrt;
-	SK_U32	DWord;
-	SK_U32	XsCsr;
-	SK_U32	XaCsr;
-	SK_U64	ToutStart;
-	int		i;
-	int		ToutCnt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((Dir & SK_STOP_TX) != 0) {
-		/* disable receiver and transmitter */
-		SkMacRxTxDisable(pAC, IoC, Port);
-		
-		/* stop both transmit queues */
-		/*
-		 * If the BMU is in the reset state CSR_STOP will terminate
-		 * immediately.
-		 */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP);
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP);
-
-		ToutStart = SkOsGetTime(pAC);
-		ToutCnt = 0;
-		do {
-			/*
-			 * Clear packet arbiter timeout to make sure
-			 * this loop will terminate.
-			 */
-			SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ?
-				PA_CLR_TO_TX1 : PA_CLR_TO_TX2));
-
-			/*
-			 * If the transfer stucks at the MAC the STOP command will not
-			 * terminate if we don't flush the XMAC's transmit FIFO !
-			 */
-			SkMacFlushTxFifo(pAC, IoC, Port);
-
-			XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff);
-			XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff);
-
-			if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) {
-				/*
-				 * Timeout of 1/18 second reached.
-				 * This needs to be checked at 1/18 sec only.
-				 */
-				ToutCnt++;
-				if (ToutCnt > 1) {
-					/* Might be a problem when the driver event handler
-					 * calls StopPort again. XXX.
-					 */
-
-					/* Fatal Error, Loop aborted */
-					SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018,
-						SKERR_HWI_E018MSG);
-#ifndef SK_DIAG
-					Para.Para64 = Port;
-					SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-#endif /* !SK_DIAG */
-					return;
-				}
-				/*
-				 * Cache incoherency workaround: Assume a start command
-				 * has been lost while sending the frame.
-				 */
-				ToutStart = SkOsGetTime(pAC);
-
-				if ((XsCsr & CSR_STOP) != 0) {
-					SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START);
-				}
-				if ((XaCsr & CSR_STOP) != 0) {
-					SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START);
-				}
-			}
-
-			/*
-			 * Because of the ASIC problem report entry from 21.08.1998 it is
-			 * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set.
-			 */
-		} while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE ||
-				 (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
-
-		/* Reset the MAC depending on the RstMode */
-		if (RstMode == SK_SOFT_RST) {
-			SkMacSoftRst(pAC, IoC, Port);
-		}
-		else {
-			SkMacHardRst(pAC, IoC, Port);
-		}
- 		
-		/* Disable Force Sync bit and Enable Alloc bit */
-		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
-			TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-		
-		/* Stop Interval Timer and Limit Counter of Tx Arbiter */
-		SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L);
-		SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L);
-
-		/* Perform a local reset of the port's Tx path */
-
-		/* Reset the PCI FIFO of the async Tx queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET);
-		/* Reset the PCI FIFO of the sync Tx queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET);
-		/* Reset the RAM Buffer async Tx queue */
-		SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET);
-		/* Reset the RAM Buffer sync Tx queue */
-		SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET);
-		
-		/* Reset Tx MAC FIFO */
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			/* Note: MFF_RST_SET does NOT reset the XMAC ! */
-			SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET);
-
-			/* switch Link and Tx LED off, stop the LED counters */
-			/* Link LED is switched off by the RLMT and the Diag itself */
-			SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS);
-		}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-		if (pAC->GIni.GIYukon) {
-			/* Reset TX MAC FIFO */
-			SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
-		}
-#endif /* YUKON */
-	}
-
-	if ((Dir & SK_STOP_RX) != 0) {
-		/*
-		 * The RX Stop Command will not terminate if no buffers
-		 * are queued in the RxD ring. But it will always reach
-		 * the Idle state. Therefore we can use this feature to
-		 * stop the transfer of received packets.
-		 */
-		/* stop the port's receive queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP);
-		
-		i = 100;
-		do {
-			/*
-			 * Clear packet arbiter timeout to make sure
-			 * this loop will terminate
-			 */
-			SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ?
-				PA_CLR_TO_RX1 : PA_CLR_TO_RX2));
-
-			DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff);
-
-			/* timeout if i==0 (bug fix for #10748) */
-			if (--i == 0) {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024,
-					SKERR_HWI_E024MSG);
-				break;
-			}
-			/*
-			 * because of the ASIC problem report entry from 21.08.98
-			 * it is required to wait until CSR_STOP is reset and
-			 * CSR_SV_IDLE is set.
-			 */
-		} while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
-
-		/* The path data transfer activity is fully stopped now */
-
-		/* Perform a local reset of the port's Rx path */
-
-		 /*	Reset the PCI FIFO of the Rx queue */
-		SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET);
-		/* Reset the RAM Buffer receive queue */
-		SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET);
-
-		/* Reset Rx MAC FIFO */
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			
-			SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET);
-
-			/* switch Rx LED off, stop the LED counter */
-			SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS);
-		}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-		if (pAC->GIni.GIYukon) {
-			/* Reset Rx MAC FIFO */
-			SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
-		}
-#endif /* YUKON */
-	}
-}	/* SkGeStopPort */
-
-
-/******************************************************************************
- *
- *	SkGeInit0() - Level 0 Initialization
- *
- * Description:
- *	- Initialize the BMU address offsets
- *
- * Returns:
- *	nothing
- */
-static void SkGeInit0(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	int i;
-	SK_GEPORT *pPrt;
-
-	for (i = 0; i < SK_MAX_MACS; i++) {
-		pPrt = &pAC->GIni.GP[i];
-
-		pPrt->PState = SK_PRT_RESET;
-		pPrt->PRxQOff = QOffTab[i].RxQOff;
-		pPrt->PXsQOff = QOffTab[i].XsQOff;
-		pPrt->PXaQOff = QOffTab[i].XaQOff;
-		pPrt->PCheckPar = SK_FALSE;
-		pPrt->PIsave = 0;
-		pPrt->PPrevShorts = 0;
-		pPrt->PLinkResCt = 0;
-		pPrt->PAutoNegTOCt = 0;
-		pPrt->PPrevRx = 0;
-		pPrt->PPrevFcs = 0;
-		pPrt->PRxLim = SK_DEF_RX_WA_LIM;
-		pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;
-		pPrt->PLinkSpeedCap = (SK_U8)SK_LSPEED_CAP_1000MBPS;
-		pPrt->PLinkSpeed = (SK_U8)SK_LSPEED_1000MBPS;
-		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_UNKNOWN;
-		pPrt->PLinkModeConf = (SK_U8)SK_LMODE_AUTOSENSE;
-		pPrt->PFlowCtrlMode = (SK_U8)SK_FLOW_MODE_SYM_OR_REM;
-		pPrt->PLinkCap = (SK_U8)(SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL |
-			SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL);
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
-		pPrt->PFlowCtrlCap = (SK_U8)SK_FLOW_MODE_SYM_OR_REM;
-		pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
-		pPrt->PMSCap = 0;
-		pPrt->PMSMode = (SK_U8)SK_MS_MODE_AUTO;
-		pPrt->PMSStatus = (SK_U8)SK_MS_STAT_UNSET;
-		pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN;
-		pPrt->PAutoNegFail = SK_FALSE;
-		pPrt->PHWLinkUp = SK_FALSE;
-		pPrt->PLinkBroken = SK_TRUE; /* See WA code */
-		pPrt->PPhyPowerState = PHY_PM_OPERATIONAL_MODE;
-		pPrt->PMacColThres = TX_COL_DEF;
-		pPrt->PMacJamLen = TX_JAM_LEN_DEF;
-		pPrt->PMacJamIpgVal	= TX_JAM_IPG_DEF;
-		pPrt->PMacJamIpgData = TX_IPG_JAM_DEF;
-		pPrt->PMacIpgData = IPG_DATA_DEF;
-		pPrt->PMacLimit4 = SK_FALSE;
-	}
-
-	pAC->GIni.GIPortUsage = SK_RED_LINK;
-	pAC->GIni.GILedBlinkCtrl = (SK_U16)OemConfig.Value;
-	pAC->GIni.GIValIrqMask = IS_ALL_MSK;
-
-}	/* SkGeInit0*/
-
-
-/******************************************************************************
- *
- *	SkGeInit1() - Level 1 Initialization
- *
- * Description:
- *	o Do a software reset.
- *	o Clear all reset bits.
- *	o Verify that the detected hardware is present.
- *	  Return an error if not.
- *	o Get the hardware configuration
- *		+ Read the number of MACs/Ports.
- *		+ Read the RAM size.
- *		+ Read the PCI Revision Id.
- *		+ Find out the adapters host clock speed
- *		+ Read and check the PHY type
- *
- * Returns:
- *	0:	success
- *	5:	Unexpected PHY type detected
- *	6:	HW self test failed
- */
-static int SkGeInit1(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	SK_U8	Byte;
-	SK_U16	Word;
-	SK_U16	CtrlStat;
-	SK_U32	DWord;
-	int	RetVal;
-	int	i;
-
-	RetVal = 0;
-
-	/* save CLK_RUN bits (YUKON-Lite) */
-	SK_IN16(IoC, B0_CTST, &CtrlStat);
-
-	/* do the SW-reset */
-	SK_OUT8(IoC, B0_CTST, CS_RST_SET);
-
-	/* release the SW-reset */
-	SK_OUT8(IoC, B0_CTST, CS_RST_CLR);
-
-	/* reset all error bits in the PCI STATUS register */
-	/*
-	 * Note: PCI Cfg cycles cannot be used, because they are not
-	 *		 available on some platforms after 'boot time'.
-	 */
-	SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-	
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-	SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
-	/* release Master Reset */
-	SK_OUT8(IoC, B0_CTST, CS_MRST_CLR);
-
-#ifdef CLK_RUN
-	CtrlStat |= CS_CLK_RUN_ENA;
-#endif /* CLK_RUN */
-
-	/* restore CLK_RUN bits */
-	SK_OUT16(IoC, B0_CTST, (SK_U16)(CtrlStat &
-		(CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA)));
-
-	/* read Chip Identification Number */
-	SK_IN8(IoC, B2_CHIP_ID, &Byte);
-	pAC->GIni.GIChipId = Byte;
-	
-	/* read number of MACs */
-	SK_IN8(IoC, B2_MAC_CFG, &Byte);
-	pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
-	
-	/* get Chip Revision Number */
-	pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
-
-	/* get diff. PCI parameters */
-	SK_IN16(IoC, B0_CTST, &CtrlStat);
-	
-	/* read the adapters RAM size */
-	SK_IN8(IoC, B2_E_0, &Byte);
-	
-	pAC->GIni.GIGenesis = SK_FALSE;
-	pAC->GIni.GIYukon = SK_FALSE;
-	pAC->GIni.GIYukonLite = SK_FALSE;
-
-#ifdef GENESIS
-	if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
-
-		pAC->GIni.GIGenesis = SK_TRUE;
-
-		if (Byte == (SK_U8)3) {						
-			/* special case: 4 x 64k x 36, offset = 0x80000 */
-			pAC->GIni.GIRamSize = 1024;
-			pAC->GIni.GIRamOffs = (SK_U32)512 * 1024;
-		}
-		else {
-			pAC->GIni.GIRamSize = (int)Byte * 512;
-			pAC->GIni.GIRamOffs = 0;
-		}
-		/* all GE adapters work with 53.125 MHz host clock */
-		pAC->GIni.GIHstClkFact = SK_FACT_53;
-		
-		/* set Descr. Poll Timer Init Value to 250 ms */
-		pAC->GIni.GIPollTimerVal =
-			SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100;
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIChipId != CHIP_ID_GENESIS) {
-		
-		pAC->GIni.GIYukon = SK_TRUE;
-		
-		pAC->GIni.GIRamSize = (Byte == (SK_U8)0) ? 128 : (int)Byte * 4;
-		
-		pAC->GIni.GIRamOffs = 0;
-		
-		/* WA for chip Rev. A */
-		pAC->GIni.GIWolOffs = (pAC->GIni.GIChipId == CHIP_ID_YUKON &&
-			pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0;
-		
-		/* get PM Capabilities of PCI config space */
-		SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word);
-
-		/* check if VAUX is available */
-		if (((CtrlStat & CS_VAUX_AVAIL) != 0) &&
-			/* check also if PME from D3cold is set */
-			((Word & PCI_PME_D3C_SUP) != 0)) {
-			/* set entry in GE init struct */
-			pAC->GIni.GIVauxAvail = SK_TRUE;
-		}
-		
-		if (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE) {
-			/* this is Rev. A1 */
-			pAC->GIni.GIYukonLite = SK_TRUE;
-		}
-		else {
-			/* save Flash-Address Register */
-			SK_IN32(IoC, B2_FAR, &DWord);
-
-			/* test Flash-Address Register */
-			SK_OUT8(IoC, B2_FAR + 3, 0xff);
-			SK_IN8(IoC, B2_FAR + 3, &Byte);
-
-			if (Byte != 0) {
-				/* this is Rev. A0 */
-				pAC->GIni.GIYukonLite = SK_TRUE;
-
-				/* restore Flash-Address Register */
-				SK_OUT32(IoC, B2_FAR, DWord);
-			}
-		}
-
-		/* switch power to VCC (WA for VAUX problem) */
-		SK_OUT8(IoC, B0_POWER_CTRL, (SK_U8)(PC_VAUX_ENA | PC_VCC_ENA |
-			PC_VAUX_OFF | PC_VCC_ON));
-
-		/* read the Interrupt source */
-		SK_IN32(IoC, B0_ISRC, &DWord);
-		
-		if ((DWord & IS_HW_ERR) != 0) {
-			/* read the HW Error Interrupt source */
-			SK_IN32(IoC, B0_HWE_ISRC, &DWord);
-			
-			if ((DWord & IS_IRQ_SENSOR) != 0) {
-				/* disable HW Error IRQ */
-				pAC->GIni.GIValIrqMask &= ~IS_HW_ERR;
-			}
-		}
-		
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-			/* set GMAC Link Control reset */
-			SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET);
-
-			/* clear GMAC Link Control reset */
-			SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
-		}
-		/* all YU chips work with 78.125 MHz host clock */
-		pAC->GIni.GIHstClkFact = SK_FACT_78;
-		
-		pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;	/* 215 ms */
-	}
-#endif /* YUKON */
-
-	/* check if 64-bit PCI Slot is present */
-	pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0);
-	
-	/* check if 66 MHz PCI Clock is active */
-	pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0);
-
-	/* read PCI HW Revision Id. */
-	SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte);
-	pAC->GIni.GIPciHwRev = Byte;
-
-	/* read the PMD type */
-	SK_IN8(IoC, B2_PMD_TYP, &Byte);
-	pAC->GIni.GICopperType = (SK_U8)(Byte == 'T');
-
-	/* read the PHY type */
-	SK_IN8(IoC, B2_E_1, &Byte);
-
-	Byte &= 0x0f;	/* the PHY type is stored in the lower nibble */
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			switch (Byte) {
-			case SK_PHY_XMAC:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC;
-				break;
-			case SK_PHY_BCOM:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM;
-				pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO |
-					SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE);
-				break;
-#ifdef OTHER_PHY
-			case SK_PHY_LONE:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE;
-				break;
-			case SK_PHY_NAT:
-				pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT;
-				break;
-#endif /* OTHER_PHY */
-			default:
-				/* ERROR: unexpected PHY type detected */
-				RetVal = 5;
-				break;
-			}
-		}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-		if (pAC->GIni.GIYukon) {
-			
-			if (Byte < (SK_U8)SK_PHY_MARV_COPPER) {
-				/* if this field is not initialized */
-				Byte = (SK_U8)SK_PHY_MARV_COPPER;
-				
-				pAC->GIni.GICopperType = SK_TRUE;
-			}
-			
-			pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV;
-			
-			if (pAC->GIni.GICopperType) {
-
-				pAC->GIni.GP[i].PLinkSpeedCap = (SK_U8)(SK_LSPEED_CAP_AUTO |
-					SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS |
-					SK_LSPEED_CAP_1000MBPS);
-				
-				pAC->GIni.GP[i].PLinkSpeed = (SK_U8)SK_LSPEED_AUTO;
-				
-				pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO |
-					SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE);
-			}
-			else {
-				Byte = (SK_U8)SK_PHY_MARV_FIBER;
-			}
-		}
-#endif /* YUKON */
-		
-		pAC->GIni.GP[i].PhyType = (int)Byte;
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-			("PHY type: %d  PHY addr: %04x\n", Byte,
-			pAC->GIni.GP[i].PhyAddr));
-	}
-	
-	/* get MAC Type & set function pointers dependent on */
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		pAC->GIni.GIMacType = SK_MAC_XMAC;
-
-		pAC->GIni.GIFunc.pFnMacUpdateStats	= SkXmUpdateStats;
-		pAC->GIni.GIFunc.pFnMacStatistic	= SkXmMacStatistic;
-		pAC->GIni.GIFunc.pFnMacResetCounter	= SkXmResetCounter;
-		pAC->GIni.GIFunc.pFnMacOverflow		= SkXmOverflowStatus;
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		pAC->GIni.GIMacType = SK_MAC_GMAC;
-
-		pAC->GIni.GIFunc.pFnMacUpdateStats	= SkGmUpdateStats;
-		pAC->GIni.GIFunc.pFnMacStatistic	= SkGmMacStatistic;
-		pAC->GIni.GIFunc.pFnMacResetCounter	= SkGmResetCounter;
-		pAC->GIni.GIFunc.pFnMacOverflow		= SkGmOverflowStatus;
-
-#ifdef SPECIAL_HANDLING
-		if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
-			/* check HW self test result */
-			SK_IN8(IoC, B2_E_3, &Byte);
-			if (Byte & B2_E3_RES_MASK) {
-				RetVal = 6;
-			}
-		}
-#endif
-	}
-#endif /* YUKON */
-	
-	return(RetVal);
-}	/* SkGeInit1 */
-
-
-/******************************************************************************
- *
- *	SkGeInit2() - Level 2 Initialization
- *
- * Description:
- *	- start the Blink Source Counter
- *	- start the Descriptor Poll Timer
- *	- configure the MAC-Arbiter
- *	- configure the Packet-Arbiter
- *	- enable the Tx Arbiters
- *	- enable the RAM Interface Arbiter
- *
- * Returns:
- *	nothing
- */
-static void SkGeInit2(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-#ifdef GENESIS
-	SK_U32	DWord;
-#endif /* GENESIS */
-	int		i;
-
-	/* start the Descriptor Poll Timer */
-	if (pAC->GIni.GIPollTimerVal != 0) {
-		if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) {
-			pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG);
-		}
-		SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal);
-		SK_OUT8(IoC, B28_DPT_CTRL, DPT_START);
-	}
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		/* start the Blink Source Counter */
-		DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
-
-		SK_OUT32(IoC, B2_BSC_INI, DWord);
-		SK_OUT8(IoC, B2_BSC_CTRL, BSC_START);
-
-		/*
-		 * Configure the MAC Arbiter and the Packet Arbiter.
-		 * They will be started once and never be stopped.
-		 */
-		SkGeInitMacArb(pAC, IoC);
-
-		SkGeInitPktArb(pAC, IoC);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* start Time Stamp Timer */
-		SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START);
-	}
-#endif /* YUKON */
-
-	/* enable the Tx Arbiters */
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB);
-	}
-
-	/* enable the RAM Interface Arbiter */
-	SkGeInitRamIface(pAC, IoC);
-
-}	/* SkGeInit2 */
-
-/******************************************************************************
- *
- *	SkGeInit() - Initialize the GE Adapter with the specified level.
- *
- * Description:
- *	Level	0:	Initialize the Module structures.
- *	Level	1:	Generic Hardware Initialization. The IOP/MemBase pointer has
- *				to be set before calling this level.
- *
- *			o Do a software reset.
- *			o Clear all reset bits.
- *			o Verify that the detected hardware is present.
- *			  Return an error if not.
- *			o Get the hardware configuration
- *				+ Set GIMacsFound with the number of MACs.
- *				+ Store the RAM size in GIRamSize.
- *				+ Save the PCI Revision ID in GIPciHwRev.
- *			o return an error
- *				if Number of MACs > SK_MAX_MACS
- *
- *			After returning from Level 0 the adapter
- *			may be accessed with IO operations.
- *
- *	Level	2:	start the Blink Source Counter
- *
- * Returns:
- *	0:	success
- *	1:	Number of MACs exceeds SK_MAX_MACS	(after level 1)
- *	2:	Adapter not present or not accessible
- *	3:	Illegal initialization level
- *	4:	Initialization Level 1 Call missing
- *	5:	Unexpected PHY type detected
- *	6:	HW self test failed
- */
-int	SkGeInit(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Level)		/* initialization level */
-{
-	int		RetVal;		/* return value */
-	SK_U32	DWord;
-
-	RetVal = 0;
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
-		("SkGeInit(Level %d)\n", Level));
-
-	switch (Level) {
-	case SK_INIT_DATA:
-		/* Initialization Level 0 */
-		SkGeInit0(pAC, IoC);
-		pAC->GIni.GILevel = SK_INIT_DATA;
-		break;
-	
-	case SK_INIT_IO:
-		/* Initialization Level 1 */
-		RetVal = SkGeInit1(pAC, IoC);
-		if (RetVal != 0) {
-			break;
-		}
-
-		/* check if the adapter seems to be accessible */
-		SK_OUT32(IoC, B2_IRQM_INI, SK_TEST_VAL);
-		SK_IN32(IoC, B2_IRQM_INI, &DWord);
-		SK_OUT32(IoC, B2_IRQM_INI, 0L);
-		
-		if (DWord != SK_TEST_VAL) {
-			RetVal = 2;
-			break;
-		}
-
-		/* check if the number of GIMacsFound matches SK_MAX_MACS */
-		if (pAC->GIni.GIMacsFound > SK_MAX_MACS) {
-			RetVal = 1;
-			break;
-		}
-
-		/* Level 1 successfully passed */
-		pAC->GIni.GILevel = SK_INIT_IO;
-		break;
-	
-	case SK_INIT_RUN:
-		/* Initialization Level 2 */
-		if (pAC->GIni.GILevel != SK_INIT_IO) {
-#ifndef SK_DIAG
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG);
-#endif /* !SK_DIAG */
-			RetVal = 4;
-			break;
-		}
-		SkGeInit2(pAC, IoC);
-
-		/* Level 2 successfully passed */
-		pAC->GIni.GILevel = SK_INIT_RUN;
-		break;
-	
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG);
-		RetVal = 3;
-		break;
-	}
-
-	return(RetVal);
-}	/* SkGeInit */
-
-
-/******************************************************************************
- *
- *	SkGeDeInit() - Deinitialize the adapter
- *
- * Description:
- *	All ports of the adapter will be stopped if not already done.
- *	Do a software reset and switch off all LEDs.
- *
- * Returns:
- *	nothing
- */
-void SkGeDeInit(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC)		/* IO context */
-{
-	int	i;
-	SK_U16	Word;
-
-#if (!defined(SK_SLIM) && !defined(VCPU))
-	/* ensure I2C is ready */
-	SkI2cWaitIrq(pAC, IoC);
-#endif	
-
-	/* stop all current transfer activity */
-	for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-		if (pAC->GIni.GP[i].PState != SK_PRT_STOP &&
-			pAC->GIni.GP[i].PState != SK_PRT_RESET) {
-
-			SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST);
-		}
-	}
-
-	/* Reset all bits in the PCI STATUS register */
-	/*
-	 * Note: PCI Cfg cycles cannot be used, because they are not
-	 *	 available on some platforms after 'boot time'.
-	 */
-	SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-	
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-	SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
-	SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
-	/* do the reset, all LEDs are switched off now */
-	SK_OUT8(IoC, B0_CTST, CS_RST_SET);
-	
-	pAC->GIni.GILevel = SK_INIT_DATA;
-}	/* SkGeDeInit */
-
-
-/******************************************************************************
- *
- *	SkGeInitPort()	Initialize the specified port.
- *
- * Description:
- *	PRxQSize, PXSQSize, and PXAQSize has to be
- *	configured for the specified port before calling this function.
- *  The descriptor rings has to be initialized too.
- *
- *	o (Re)configure queues of the specified port.
- *	o configure the MAC of the specified port.
- *	o put ASIC and MAC(s) in operational mode.
- *	o initialize Rx/Tx and Sync LED
- *	o initialize RAM Buffers and MAC FIFOs
- *
- *	The port is ready to connect when returning.
- *
- * Note:
- *	The MAC's Rx and Tx state machine is still disabled when returning.
- *
- * Returns:
- *	0:	success
- *	1:	Queue size initialization error. The configured values
- *		for PRxQSize, PXSQSize, or PXAQSize are invalid for one
- *		or more queues. The specified port was NOT initialized.
- *		An error log entry was generated.
- *	2:	The port has to be stopped before it can be initialized again.
- */
-int SkGeInitPort(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port to configure */
-{
-	SK_GEPORT *pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (SkGeCheckQSize(pAC, Port) != 0) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG);
-		return(1);
-	}
-	
-	if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG);
-		return(2);
-	}
-
-	/* configuration ok, initialize the Port now */
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		/* initialize Rx, Tx and Link LED */
-		/*
-		 * If 1000BT Phy needs LED initialization than swap
-		 * LED and XMAC initialization order
-		 */
-		SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
-		SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA);
-		/* The Link LED is initialized by RLMT or Diagnostics itself */
-		
-		SkXmInitMac(pAC, IoC, Port);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-
-		SkGmInitMac(pAC, IoC, Port);
-	}
-#endif /* YUKON */
-	
-	/* do NOT initialize the Link Sync Counter */
-
-	SkGeInitMacFifo(pAC, IoC, Port);
-	
-	SkGeInitRamBufs(pAC, IoC, Port);
-	
-	if (pPrt->PXSQSize != 0) {
-		/* enable Force Sync bit if synchronous queue available */
-		SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC);
-	}
-	
-	SkGeInitBmu(pAC, IoC, Port);
-
-	/* mark port as initialized */
-	pPrt->PState = SK_PRT_INIT;
-
-	return(0);
-}	/* SkGeInitPort */
diff --git a/drivers/net/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c
deleted file mode 100644
index 0a6f67a7a395..000000000000
--- a/drivers/net/sk98lin/skgemib.c
+++ /dev/null
@@ -1,1075 +0,0 @@
-/*****************************************************************************
- *
- * Name:	skgemib.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.11 $
- * Date:	$Date: 2003/09/15 13:38:12 $
- * Purpose:	Private Network Management Interface Management Database
- *
- ****************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * PRIVATE OID handler function prototypes
- */
-PNMI_STATIC int Addr(SK_AC *pAC, SK_IOC IoC, int action,
-	SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int CsumStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int General(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int Mac8023Stat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int MacPrivateConf(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int MacPrivateStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int Monitor(SK_AC *pAC, SK_IOC IoC, int action,
-	SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int OidStruct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int Perform(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int* pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int Rlmt(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int RlmtStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int SensorStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int Vpd(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-
-#ifdef SK_POWER_MGMT
-PNMI_STATIC int PowerManagement(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-#endif /* SK_POWER_MGMT */
-
-#ifdef SK_DIAG_SUPPORT
-PNMI_STATIC int DiagActions(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance,
-	unsigned int TableIndex, SK_U32 NetIndex);
-#endif /* SK_DIAG_SUPPORT */
-
-
-/* defines *******************************************************************/
-#define ID_TABLE_SIZE (sizeof(IdTable)/sizeof(IdTable[0]))
-
-
-/* global variables **********************************************************/
-
-/*
- * Table to correlate OID with handler function and index to
- * hardware register stored in StatAddress if applicable.
- */
-PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = {
-	{OID_GEN_XMIT_OK,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX},
-	{OID_GEN_RCV_OK,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX},
-	{OID_GEN_XMIT_ERROR,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, General, 0},
-	{OID_GEN_RCV_ERROR,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, General, 0},
-	{OID_GEN_RCV_NO_BUFFER,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, General, 0},
-	{OID_GEN_DIRECTED_FRAMES_XMIT,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNICAST},
-	{OID_GEN_MULTICAST_FRAMES_XMIT,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTICAST},
-	{OID_GEN_BROADCAST_FRAMES_XMIT,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_BROADCAST},
-	{OID_GEN_DIRECTED_FRAMES_RCV,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_UNICAST},
-	{OID_GEN_MULTICAST_FRAMES_RCV,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_MULTICAST},
-	{OID_GEN_BROADCAST_FRAMES_RCV,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_BROADCAST},
-	{OID_GEN_RCV_CRC_ERROR,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FCS},
-	{OID_GEN_TRANSMIT_QUEUE_LENGTH,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, General, 0},
-	{OID_802_3_PERMANENT_ADDRESS,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, 0},
-	{OID_802_3_CURRENT_ADDRESS,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, 0},
-	{OID_802_3_RCV_ERROR_ALIGNMENT,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FRAMING},
-	{OID_802_3_XMIT_ONE_COLLISION,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_SINGLE_COL},
-	{OID_802_3_XMIT_MORE_COLLISIONS,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTI_COL},
-	{OID_802_3_XMIT_DEFERRED,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_DEFFERAL},
-	{OID_802_3_XMIT_MAX_COLLISIONS,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_EXCESS_COL},
-	{OID_802_3_RCV_OVERRUN,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_OVERFLOW},
-	{OID_802_3_XMIT_UNDERRUN,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNDERRUN},
-	{OID_802_3_XMIT_TIMES_CRS_LOST,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_CARRIER},
-	{OID_802_3_XMIT_LATE_COLLISIONS,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_LATE_COL},
-#ifdef SK_POWER_MGMT
-	{OID_PNP_CAPABILITIES,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, PowerManagement, 0},
-	{OID_PNP_SET_POWER,
-		0,
-		0,
-		0,
-		SK_PNMI_WO, PowerManagement, 0},
-	{OID_PNP_QUERY_POWER,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, PowerManagement, 0},
-	{OID_PNP_ADD_WAKE_UP_PATTERN,
-		0,
-		0,
-		0,
-		SK_PNMI_WO, PowerManagement, 0},
-	{OID_PNP_REMOVE_WAKE_UP_PATTERN,
-		0,
-		0,
-		0,
-		SK_PNMI_WO, PowerManagement, 0},
-	{OID_PNP_ENABLE_WAKE_UP,
-		0,
-		0,
-		0,
-		SK_PNMI_RW, PowerManagement, 0},
-#endif /* SK_POWER_MGMT */
-#ifdef SK_DIAG_SUPPORT
-	{OID_SKGE_DIAG_MODE,
-		0,
-		0,
-		0,
-		SK_PNMI_RW, DiagActions, 0},
-#endif /* SK_DIAG_SUPPORT */
-	{OID_SKGE_MDB_VERSION,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(MgmtDBVersion),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_SUPPORTED_LIST,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_ALL_DATA,
-		0,
-		0,
-		0,
-		SK_PNMI_RW, OidStruct, 0},
-	{OID_SKGE_VPD_FREE_BYTES,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(VpdFreeBytes),
-		SK_PNMI_RO, Vpd, 0},
-	{OID_SKGE_VPD_ENTRIES_LIST,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(VpdEntriesList),
-		SK_PNMI_RO, Vpd, 0},
-	{OID_SKGE_VPD_ENTRIES_NUMBER,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(VpdEntriesNumber),
-		SK_PNMI_RO, Vpd, 0},
-	{OID_SKGE_VPD_KEY,
-		SK_PNMI_VPD_ENTRIES,
-		sizeof(SK_PNMI_VPD),
-		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdKey),
-		SK_PNMI_RO, Vpd, 0},
-	{OID_SKGE_VPD_VALUE,
-		SK_PNMI_VPD_ENTRIES,
-		sizeof(SK_PNMI_VPD),
-		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdValue),
-		SK_PNMI_RO, Vpd, 0},
-	{OID_SKGE_VPD_ACCESS,
-		SK_PNMI_VPD_ENTRIES,
-		sizeof(SK_PNMI_VPD),
-		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAccess),
-		SK_PNMI_RO, Vpd, 0},
-	{OID_SKGE_VPD_ACTION,
-		SK_PNMI_VPD_ENTRIES,
-		sizeof(SK_PNMI_VPD),
-		SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAction),
-		SK_PNMI_RW, Vpd, 0},
-	{OID_SKGE_PORT_NUMBER,		
-		1,
-		0,
-		SK_PNMI_MAI_OFF(PortNumber),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_DEVICE_TYPE,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(DeviceType),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_DRIVER_DESCR,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(DriverDescr),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_DRIVER_VERSION,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(DriverVersion),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_DRIVER_RELDATE,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(DriverReleaseDate),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_DRIVER_FILENAME,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(DriverFileName),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_HW_DESCR,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(HwDescr),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_HW_VERSION,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(HwVersion),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_CHIPSET,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(Chipset),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_CHIPID,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(ChipId),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RAMSIZE,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RamSize),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_VAUXAVAIL,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(VauxAvail),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_ACTION,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(Action),
-		SK_PNMI_RW, Perform, 0},
-	{OID_SKGE_RESULT,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TestResult),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_BUS_TYPE,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(BusType),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_BUS_SPEED,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(BusSpeed),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_BUS_WIDTH,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(BusWidth),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TX_SW_QUEUE_LEN,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TxSwQueueLen),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TX_SW_QUEUE_MAX,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TxSwQueueMax),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TX_RETRY,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TxRetryCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RX_INTR_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RxIntrCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TX_INTR_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TxIntrCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RX_NO_BUF_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RxNoBufCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TX_NO_BUF_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TxNoBufCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TX_USED_DESCR_NO,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TxUsedDescrNo),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RX_DELIVERED_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RxDeliveredCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RX_OCTETS_DELIV_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RxOctetsDeliveredCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RX_HW_ERROR_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RxHwErrorsCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TX_HW_ERROR_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TxHwErrorsCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_IN_ERRORS_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(InErrorsCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_OUT_ERROR_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(OutErrorsCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_ERR_RECOVERY_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(ErrRecoveryCts),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_SYSUPTIME,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(SysUpTime),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_SENSOR_NUMBER,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(SensorNumber),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_SENSOR_INDEX,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorIndex),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_DESCR,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorDescr),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_TYPE,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorType),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_VALUE,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorValue),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_WAR_THRES_LOW,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdLow),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_WAR_THRES_UPP,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdHigh),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_ERR_THRES_LOW,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdLow),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_ERR_THRES_UPP,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdHigh),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_STATUS,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorStatus),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_WAR_CTS,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningCts),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_ERR_CTS,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorCts),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_WAR_TIME,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningTimestamp),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_SENSOR_ERR_TIME,
-		SK_PNMI_SENSOR_ENTRIES,
-		sizeof(SK_PNMI_SENSOR),
-		SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorTimestamp),
-		SK_PNMI_RO, SensorStat, 0},
-	{OID_SKGE_CHKSM_NUMBER,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(ChecksumNumber),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_CHKSM_RX_OK_CTS,
-		SKCS_NUM_PROTOCOLS,
-		sizeof(SK_PNMI_CHECKSUM),
-		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxOkCts),
-		SK_PNMI_RO, CsumStat, 0},
-	{OID_SKGE_CHKSM_RX_UNABLE_CTS,
-		SKCS_NUM_PROTOCOLS,
-		sizeof(SK_PNMI_CHECKSUM),
-		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxUnableCts),
-		SK_PNMI_RO, CsumStat, 0},
-	{OID_SKGE_CHKSM_RX_ERR_CTS,
-		SKCS_NUM_PROTOCOLS,
-		sizeof(SK_PNMI_CHECKSUM),
-		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxErrCts),
-		SK_PNMI_RO, CsumStat, 0},
-	{OID_SKGE_CHKSM_TX_OK_CTS,
-		SKCS_NUM_PROTOCOLS,
-		sizeof(SK_PNMI_CHECKSUM),
-		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxOkCts),
-		SK_PNMI_RO, CsumStat, 0},
-	{OID_SKGE_CHKSM_TX_UNABLE_CTS,
-		SKCS_NUM_PROTOCOLS,
-		sizeof(SK_PNMI_CHECKSUM),
-		SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxUnableCts),
-		SK_PNMI_RO, CsumStat, 0},
-	{OID_SKGE_STAT_TX,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX},
-	{OID_SKGE_STAT_TX_OCTETS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOctetsOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_OCTET},
-	{OID_SKGE_STAT_TX_BROADCAST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBroadcastOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BROADCAST},
-	{OID_SKGE_STAT_TX_MULTICAST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMulticastOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTICAST},
-	{OID_SKGE_STAT_TX_UNICAST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUnicastOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNICAST},
-	{OID_SKGE_STAT_TX_LONGFRAMES,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLongFramesCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LONGFRAMES},
-	{OID_SKGE_STAT_TX_BURST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBurstCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BURST},
-	{OID_SKGE_STAT_TX_PFLOWC,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxPauseMacCtrlCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_PMACC},
-	{OID_SKGE_STAT_TX_FLOWC,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMacCtrlCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MACC},
-	{OID_SKGE_STAT_TX_SINGLE_COL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSingleCollisionCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SINGLE_COL},
-	{OID_SKGE_STAT_TX_MULTI_COL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMultipleCollisionCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTI_COL},
-	{OID_SKGE_STAT_TX_EXCESS_COL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveCollisionCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_COL},
-	{OID_SKGE_STAT_TX_LATE_COL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLateCollisionCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LATE_COL},
-	{OID_SKGE_STAT_TX_DEFFERAL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxDeferralCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_DEFFERAL},
-	{OID_SKGE_STAT_TX_EXCESS_DEF,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveDeferralCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_DEF},
-	{OID_SKGE_STAT_TX_UNDERRUN,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxFifoUnderrunCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNDERRUN},
-	{OID_SKGE_STAT_TX_CARRIER,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxCarrierCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_CARRIER},
-/*	{OID_SKGE_STAT_TX_UTIL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUtilization),
-		SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */
-	{OID_SKGE_STAT_TX_64,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx64Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_64},
-	{OID_SKGE_STAT_TX_127,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx127Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_127},
-	{OID_SKGE_STAT_TX_255,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx255Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_255},
-	{OID_SKGE_STAT_TX_511,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx511Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_511},
-	{OID_SKGE_STAT_TX_1023,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx1023Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_1023},
-	{OID_SKGE_STAT_TX_MAX,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMaxCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MAX},
-	{OID_SKGE_STAT_TX_SYNC,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC},
-	{OID_SKGE_STAT_TX_SYNC_OCTETS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncOctetsCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC_OCTET},
-	{OID_SKGE_STAT_RX,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX},
-	{OID_SKGE_STAT_RX_OCTETS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOctetsOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OCTET},
-	{OID_SKGE_STAT_RX_BROADCAST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBroadcastOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BROADCAST},
-	{OID_SKGE_STAT_RX_MULTICAST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMulticastOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MULTICAST},
-	{OID_SKGE_STAT_RX_UNICAST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUnicastOkCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_UNICAST},
-	{OID_SKGE_STAT_RX_LONGFRAMES,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxLongFramesCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_LONGFRAMES},
-	{OID_SKGE_STAT_RX_PFLOWC,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC},
-	{OID_SKGE_STAT_RX_FLOWC,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC},
-	{OID_SKGE_STAT_RX_PFLOWC_ERR,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlErrorCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC_ERR},
-	{OID_SKGE_STAT_RX_FLOWC_UNKWN,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlUnknownCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC_UNKWN},
-	{OID_SKGE_STAT_RX_BURST,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBurstCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BURST},
-	{OID_SKGE_STAT_RX_MISSED,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMissedCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MISSED},
-	{OID_SKGE_STAT_RX_FRAMING,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFramingCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FRAMING},
-	{OID_SKGE_STAT_RX_OVERFLOW,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFifoOverflowCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OVERFLOW},
-	{OID_SKGE_STAT_RX_JABBER,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxJabberCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_JABBER},
-	{OID_SKGE_STAT_RX_CARRIER,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCarrierCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CARRIER},
-	{OID_SKGE_STAT_RX_IR_LENGTH,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxIRLengthCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_IRLENGTH},
-	{OID_SKGE_STAT_RX_SYMBOL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxSymbolCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SYMBOL},
-	{OID_SKGE_STAT_RX_SHORTS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxShortsCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SHORTS},
-	{OID_SKGE_STAT_RX_RUNT,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxRuntCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_RUNT},
-	{OID_SKGE_STAT_RX_CEXT,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCextCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CEXT},
-	{OID_SKGE_STAT_RX_TOO_LONG,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxTooLongCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_TOO_LONG},
-	{OID_SKGE_STAT_RX_FCS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFcsCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FCS},
-/*	{OID_SKGE_STAT_RX_UTIL,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUtilization),
-		SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */
-	{OID_SKGE_STAT_RX_64,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx64Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_64},
-	{OID_SKGE_STAT_RX_127,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx127Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_127},
-	{OID_SKGE_STAT_RX_255,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx255Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_255},
-	{OID_SKGE_STAT_RX_511,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx511Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_511},
-	{OID_SKGE_STAT_RX_1023,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx1023Cts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_1023},
-	{OID_SKGE_STAT_RX_MAX,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_STAT),
-		SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMaxCts),
-		SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MAX},
-	{OID_SKGE_PHYS_CUR_ADDR,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacCurrentAddr),
-		SK_PNMI_RW, Addr, 0},
-	{OID_SKGE_PHYS_FAC_ADDR,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacFactoryAddr),
-		SK_PNMI_RO, Addr, 0},
-	{OID_SKGE_PMD,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPMD),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_CONNECTOR,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfConnector),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_PHY_TYPE,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_LINK_CAP,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkCapability),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_LINK_MODE,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkMode),
-		SK_PNMI_RW, MacPrivateConf, 0},
-	{OID_SKGE_LINK_MODE_STATUS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkModeStatus),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_LINK_STATUS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkStatus),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_FLOWCTRL_CAP,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlCapability),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_FLOWCTRL_MODE,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlMode),
-		SK_PNMI_RW, MacPrivateConf, 0},
-	{OID_SKGE_FLOWCTRL_STATUS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlStatus),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_PHY_OPERATION_CAP,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationCapability),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_PHY_OPERATION_MODE,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationMode),
-		SK_PNMI_RW, MacPrivateConf, 0},
-	{OID_SKGE_PHY_OPERATION_STATUS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationStatus),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_SPEED_CAP,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedCapability),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_SPEED_MODE,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedMode),
-		SK_PNMI_RW, MacPrivateConf, 0},
-	{OID_SKGE_SPEED_STATUS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_CONF),
-		SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedStatus),
-		SK_PNMI_RO, MacPrivateConf, 0},
-	{OID_SKGE_TRAP,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(Trap),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_TRAP_NUMBER,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(TrapNumber),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RLMT_MODE,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtMode),
-		SK_PNMI_RW, Rlmt, 0},
-	{OID_SKGE_RLMT_PORT_NUMBER,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtPortNumber),
-		SK_PNMI_RO, Rlmt, 0},
-	{OID_SKGE_RLMT_PORT_ACTIVE,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtPortActive),
-		SK_PNMI_RO, Rlmt, 0},
-	{OID_SKGE_RLMT_PORT_PREFERRED,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtPortPreferred),
-		SK_PNMI_RW, Rlmt, 0},
-	{OID_SKGE_RLMT_CHANGE_CTS,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtChangeCts),
-		SK_PNMI_RO, Rlmt, 0},
-	{OID_SKGE_RLMT_CHANGE_TIME,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtChangeTime),
-		SK_PNMI_RO, Rlmt, 0},
-	{OID_SKGE_RLMT_CHANGE_ESTIM,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtChangeEstimate),
-		SK_PNMI_RO, Rlmt, 0},
-	{OID_SKGE_RLMT_CHANGE_THRES,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtChangeThreshold),
-		SK_PNMI_RW, Rlmt, 0},
-	{OID_SKGE_RLMT_PORT_INDEX,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_RLMT),
-		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtIndex),
-		SK_PNMI_RO, RlmtStat, 0},
-	{OID_SKGE_RLMT_STATUS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_RLMT),
-		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtStatus),
-		SK_PNMI_RO, RlmtStat, 0},
-	{OID_SKGE_RLMT_TX_HELLO_CTS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_RLMT),
-		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxHelloCts),
-		SK_PNMI_RO, RlmtStat, 0},
-	{OID_SKGE_RLMT_RX_HELLO_CTS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_RLMT),
-		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxHelloCts),
-		SK_PNMI_RO, RlmtStat, 0},
-	{OID_SKGE_RLMT_TX_SP_REQ_CTS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_RLMT),
-		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxSpHelloReqCts),
-		SK_PNMI_RO, RlmtStat, 0},
-	{OID_SKGE_RLMT_RX_SP_CTS,
-		SK_PNMI_MAC_ENTRIES,
-		sizeof(SK_PNMI_RLMT),
-		SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxSpHelloCts),
-		SK_PNMI_RO, RlmtStat, 0},
-	{OID_SKGE_RLMT_MONITOR_NUMBER,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(RlmtMonitorNumber),
-		SK_PNMI_RO, General, 0},
-	{OID_SKGE_RLMT_MONITOR_INDEX,
-		SK_PNMI_MONITOR_ENTRIES,
-		sizeof(SK_PNMI_RLMT_MONITOR),
-		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorIndex),
-		SK_PNMI_RO, Monitor, 0},
-	{OID_SKGE_RLMT_MONITOR_ADDR,
-		SK_PNMI_MONITOR_ENTRIES,
-		sizeof(SK_PNMI_RLMT_MONITOR),
-		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAddr),
-		SK_PNMI_RO, Monitor, 0},
-	{OID_SKGE_RLMT_MONITOR_ERRS,
-		SK_PNMI_MONITOR_ENTRIES,
-		sizeof(SK_PNMI_RLMT_MONITOR),
-		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorErrorCts),
-		SK_PNMI_RO, Monitor, 0},
-	{OID_SKGE_RLMT_MONITOR_TIMESTAMP,
-		SK_PNMI_MONITOR_ENTRIES,
-		sizeof(SK_PNMI_RLMT_MONITOR),
-		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorTimestamp),
-		SK_PNMI_RO, Monitor, 0},
-	{OID_SKGE_RLMT_MONITOR_ADMIN,
-		SK_PNMI_MONITOR_ENTRIES,
-		sizeof(SK_PNMI_RLMT_MONITOR),
-		SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAdmin),
-		SK_PNMI_RW, Monitor, 0},
-	{OID_SKGE_MTU,
-		1,
-		0,
-		SK_PNMI_MAI_OFF(MtuSize),
-		SK_PNMI_RW, MacPrivateConf, 0},
-	{OID_SKGE_VCT_GET,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Vct, 0},
-	{OID_SKGE_VCT_SET,
-		0,
-		0,
-		0,
-		SK_PNMI_WO, Vct, 0},
-	{OID_SKGE_VCT_STATUS,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, Vct, 0},
-	{OID_SKGE_BOARDLEVEL,
-		0,
-		0,
-		0,
-		SK_PNMI_RO, General, 0},
-};
-
diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c
deleted file mode 100644
index b36dd9ac6b29..000000000000
--- a/drivers/net/sk98lin/skgepnmi.c
+++ /dev/null
@@ -1,8210 +0,0 @@
-/*****************************************************************************
- *
- * Name:	skgepnmi.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.111 $
- * Date:	$Date: 2003/09/15 13:35:35 $
- * Purpose:	Private Network Management Interface
- *
- ****************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-
-#ifndef _lint
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skgepnmi.c,v 1.111 2003/09/15 13:35:35 tschilli Exp $ (C) Marvell.";
-#endif /* !_lint */
-
-#include "h/skdrv1st.h"
-#include "h/sktypes.h"
-#include "h/xmac_ii.h"
-#include "h/skdebug.h"
-#include "h/skqueue.h"
-#include "h/skgepnmi.h"
-#include "h/skgesirq.h"
-#include "h/skcsum.h"
-#include "h/skvpd.h"
-#include "h/skgehw.h"
-#include "h/skgeinit.h"
-#include "h/skdrv2nd.h"
-#include "h/skgepnm2.h"
-#ifdef SK_POWER_MGMT
-#include "h/skgepmgt.h"
-#endif
-/* defines *******************************************************************/
-
-#ifndef DEBUG
-#define PNMI_STATIC	static
-#else	/* DEBUG */
-#define PNMI_STATIC
-#endif /* DEBUG */
-
-/*
- * Public Function prototypes
- */
-int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level);
-int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf,
-	unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
-int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
-	unsigned int *pLen, SK_U32 NetIndex);
-int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
-	unsigned int *pLen, SK_U32 NetIndex);
-int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf,
-	unsigned int *pLen, SK_U32 NetIndex);
-int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param);
-int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf,
-	unsigned int * pLen, SK_U32 NetIndex);
-
-
-/*
- * Private Function prototypes
- */
-
-PNMI_STATIC SK_U8 CalculateLinkModeStatus(SK_AC *pAC, SK_IOC IoC, unsigned int
-	PhysPortIndex);
-PNMI_STATIC SK_U8 CalculateLinkStatus(SK_AC *pAC, SK_IOC IoC, unsigned int
-	PhysPortIndex);
-PNMI_STATIC void CopyMac(char *pDst, SK_MAC_ADDR *pMac);
-PNMI_STATIC void CopyTrapQueue(SK_AC *pAC, char *pDstBuf);
-PNMI_STATIC SK_U64 GetPhysStatVal(SK_AC *pAC, SK_IOC IoC,
-	unsigned int PhysPortIndex, unsigned int StatIndex);
-PNMI_STATIC SK_U64 GetStatVal(SK_AC *pAC, SK_IOC IoC, unsigned int LogPortIndex,
-	unsigned int StatIndex, SK_U32 NetIndex);
-PNMI_STATIC char* GetTrapEntry(SK_AC *pAC, SK_U32 TrapId, unsigned int Size);
-PNMI_STATIC void GetTrapQueueLen(SK_AC *pAC, unsigned int *pLen,
-	unsigned int *pEntries);
-PNMI_STATIC int GetVpdKeyArr(SK_AC *pAC, SK_IOC IoC, char *pKeyArr,
-	unsigned int KeyArrLen, unsigned int *pKeyNo);
-PNMI_STATIC int LookupId(SK_U32 Id);
-PNMI_STATIC int MacUpdate(SK_AC *pAC, SK_IOC IoC, unsigned int FirstMac,
-	unsigned int LastMac);
-PNMI_STATIC int PnmiStruct(SK_AC *pAC, SK_IOC IoC, int Action, char *pBuf,
-	unsigned int *pLen, SK_U32 NetIndex);
-PNMI_STATIC int PnmiVar(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id,
-	char *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex);
-PNMI_STATIC void QueueRlmtNewMacTrap(SK_AC *pAC, unsigned int ActiveMac);
-PNMI_STATIC void QueueRlmtPortTrap(SK_AC *pAC, SK_U32 TrapId,
-	unsigned int PortIndex);
-PNMI_STATIC void QueueSensorTrap(SK_AC *pAC, SK_U32 TrapId,
-	unsigned int SensorIndex);
-PNMI_STATIC void QueueSimpleTrap(SK_AC *pAC, SK_U32 TrapId);
-PNMI_STATIC void ResetCounter(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex);
-PNMI_STATIC int RlmtUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex);
-PNMI_STATIC int SirqUpdate(SK_AC *pAC, SK_IOC IoC);
-PNMI_STATIC void VirtualConf(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, char *pBuf);
-PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, char *pBuf,
-	unsigned int *pLen, SK_U32 Instance, unsigned int TableIndex, SK_U32 NetIndex);
-PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32);
-
-/*
- * Table to correlate OID with handler function and index to
- * hardware register stored in StatAddress if applicable.
- */
-#include "skgemib.c"
-
-/* global variables **********************************************************/
-
-/*
- * Overflow status register bit table and corresponding counter
- * dependent on MAC type - the number relates to the size of overflow
- * mask returned by the pFnMacOverflow function
- */
-PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = {
-/* Bit0  */	{ SK_PNMI_HTX, 				SK_PNMI_HTX_UNICAST},
-/* Bit1  */	{ SK_PNMI_HTX_OCTETHIGH, 	SK_PNMI_HTX_BROADCAST},
-/* Bit2  */	{ SK_PNMI_HTX_OCTETLOW, 	SK_PNMI_HTX_PMACC},
-/* Bit3  */	{ SK_PNMI_HTX_BROADCAST, 	SK_PNMI_HTX_MULTICAST},
-/* Bit4  */	{ SK_PNMI_HTX_MULTICAST, 	SK_PNMI_HTX_OCTETLOW},
-/* Bit5  */	{ SK_PNMI_HTX_UNICAST, 		SK_PNMI_HTX_OCTETHIGH},
-/* Bit6  */	{ SK_PNMI_HTX_LONGFRAMES, 	SK_PNMI_HTX_64},
-/* Bit7  */	{ SK_PNMI_HTX_BURST, 		SK_PNMI_HTX_127},
-/* Bit8  */	{ SK_PNMI_HTX_PMACC, 		SK_PNMI_HTX_255},
-/* Bit9  */	{ SK_PNMI_HTX_MACC, 		SK_PNMI_HTX_511},
-/* Bit10 */	{ SK_PNMI_HTX_SINGLE_COL, 	SK_PNMI_HTX_1023},
-/* Bit11 */	{ SK_PNMI_HTX_MULTI_COL, 	SK_PNMI_HTX_MAX},
-/* Bit12 */	{ SK_PNMI_HTX_EXCESS_COL, 	SK_PNMI_HTX_LONGFRAMES},
-/* Bit13 */	{ SK_PNMI_HTX_LATE_COL, 	SK_PNMI_HTX_RESERVED},
-/* Bit14 */	{ SK_PNMI_HTX_DEFFERAL, 	SK_PNMI_HTX_COL},
-/* Bit15 */	{ SK_PNMI_HTX_EXCESS_DEF, 	SK_PNMI_HTX_LATE_COL},
-/* Bit16 */	{ SK_PNMI_HTX_UNDERRUN, 	SK_PNMI_HTX_EXCESS_COL},
-/* Bit17 */	{ SK_PNMI_HTX_CARRIER, 		SK_PNMI_HTX_MULTI_COL},
-/* Bit18 */	{ SK_PNMI_HTX_UTILUNDER, 	SK_PNMI_HTX_SINGLE_COL},
-/* Bit19 */	{ SK_PNMI_HTX_UTILOVER, 	SK_PNMI_HTX_UNDERRUN},
-/* Bit20 */	{ SK_PNMI_HTX_64, 			SK_PNMI_HTX_RESERVED},
-/* Bit21 */	{ SK_PNMI_HTX_127, 			SK_PNMI_HTX_RESERVED},
-/* Bit22 */	{ SK_PNMI_HTX_255, 			SK_PNMI_HTX_RESERVED},
-/* Bit23 */	{ SK_PNMI_HTX_511, 			SK_PNMI_HTX_RESERVED},
-/* Bit24 */	{ SK_PNMI_HTX_1023, 		SK_PNMI_HTX_RESERVED},
-/* Bit25 */	{ SK_PNMI_HTX_MAX, 			SK_PNMI_HTX_RESERVED},
-/* Bit26 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
-/* Bit27 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
-/* Bit28 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
-/* Bit29 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
-/* Bit30 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
-/* Bit31 */	{ SK_PNMI_HTX_RESERVED, 	SK_PNMI_HTX_RESERVED},
-/* Bit32 */	{ SK_PNMI_HRX, 				SK_PNMI_HRX_UNICAST},
-/* Bit33 */	{ SK_PNMI_HRX_OCTETHIGH, 	SK_PNMI_HRX_BROADCAST},
-/* Bit34 */	{ SK_PNMI_HRX_OCTETLOW, 	SK_PNMI_HRX_PMACC},
-/* Bit35 */	{ SK_PNMI_HRX_BROADCAST, 	SK_PNMI_HRX_MULTICAST},
-/* Bit36 */	{ SK_PNMI_HRX_MULTICAST, 	SK_PNMI_HRX_FCS},
-/* Bit37 */	{ SK_PNMI_HRX_UNICAST, 		SK_PNMI_HRX_RESERVED},
-/* Bit38 */	{ SK_PNMI_HRX_PMACC, 		SK_PNMI_HRX_OCTETLOW},
-/* Bit39 */	{ SK_PNMI_HRX_MACC, 		SK_PNMI_HRX_OCTETHIGH},
-/* Bit40 */	{ SK_PNMI_HRX_PMACC_ERR, 	SK_PNMI_HRX_BADOCTETLOW},
-/* Bit41 */	{ SK_PNMI_HRX_MACC_UNKWN,	SK_PNMI_HRX_BADOCTETHIGH},
-/* Bit42 */	{ SK_PNMI_HRX_BURST, 		SK_PNMI_HRX_UNDERSIZE},
-/* Bit43 */	{ SK_PNMI_HRX_MISSED, 		SK_PNMI_HRX_RUNT},
-/* Bit44 */	{ SK_PNMI_HRX_FRAMING, 		SK_PNMI_HRX_64},
-/* Bit45 */	{ SK_PNMI_HRX_OVERFLOW, 	SK_PNMI_HRX_127},
-/* Bit46 */	{ SK_PNMI_HRX_JABBER, 		SK_PNMI_HRX_255},
-/* Bit47 */	{ SK_PNMI_HRX_CARRIER, 		SK_PNMI_HRX_511},
-/* Bit48 */	{ SK_PNMI_HRX_IRLENGTH, 	SK_PNMI_HRX_1023},
-/* Bit49 */	{ SK_PNMI_HRX_SYMBOL, 		SK_PNMI_HRX_MAX},
-/* Bit50 */	{ SK_PNMI_HRX_SHORTS, 		SK_PNMI_HRX_LONGFRAMES},
-/* Bit51 */	{ SK_PNMI_HRX_RUNT, 		SK_PNMI_HRX_TOO_LONG},
-/* Bit52 */	{ SK_PNMI_HRX_TOO_LONG, 	SK_PNMI_HRX_JABBER},
-/* Bit53 */	{ SK_PNMI_HRX_FCS, 			SK_PNMI_HRX_RESERVED},
-/* Bit54 */	{ SK_PNMI_HRX_RESERVED, 	SK_PNMI_HRX_OVERFLOW},
-/* Bit55 */	{ SK_PNMI_HRX_CEXT, 		SK_PNMI_HRX_RESERVED},
-/* Bit56 */	{ SK_PNMI_HRX_UTILUNDER, 	SK_PNMI_HRX_RESERVED},
-/* Bit57 */	{ SK_PNMI_HRX_UTILOVER, 	SK_PNMI_HRX_RESERVED},
-/* Bit58 */	{ SK_PNMI_HRX_64, 			SK_PNMI_HRX_RESERVED},
-/* Bit59 */	{ SK_PNMI_HRX_127, 			SK_PNMI_HRX_RESERVED},
-/* Bit60 */	{ SK_PNMI_HRX_255, 			SK_PNMI_HRX_RESERVED},
-/* Bit61 */	{ SK_PNMI_HRX_511, 			SK_PNMI_HRX_RESERVED},
-/* Bit62 */	{ SK_PNMI_HRX_1023, 		SK_PNMI_HRX_RESERVED},
-/* Bit63 */	{ SK_PNMI_HRX_MAX, 			SK_PNMI_HRX_RESERVED}
-};
-
-/*
- * Table for hardware register saving on resets and port switches
- */
-PNMI_STATIC const SK_PNMI_STATADDR StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES] = {
-	/* SK_PNMI_HTX */
-	{{XM_TXF_OK, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_OCTETHIGH */
-	{{XM_TXO_OK_HI, SK_TRUE}, {GM_TXO_OK_HI, SK_TRUE}},
-	/* SK_PNMI_HTX_OCTETLOW */
-	{{XM_TXO_OK_LO, SK_FALSE}, {GM_TXO_OK_LO, SK_FALSE}},
-	/* SK_PNMI_HTX_BROADCAST */
-	{{XM_TXF_BC_OK, SK_TRUE}, {GM_TXF_BC_OK, SK_TRUE}},
-	/* SK_PNMI_HTX_MULTICAST */
-	{{XM_TXF_MC_OK, SK_TRUE}, {GM_TXF_MC_OK, SK_TRUE}},
-	/* SK_PNMI_HTX_UNICAST */
-	{{XM_TXF_UC_OK, SK_TRUE}, {GM_TXF_UC_OK, SK_TRUE}},
-	/* SK_PNMI_HTX_BURST */
-	{{XM_TXE_BURST, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_PMACC */
-	{{XM_TXF_MPAUSE, SK_TRUE}, {GM_TXF_MPAUSE, SK_TRUE}},
-	/* SK_PNMI_HTX_MACC */
-	{{XM_TXF_MCTRL, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_COL */
-	{{0, SK_FALSE}, {GM_TXF_COL, SK_TRUE}},
-	/* SK_PNMI_HTX_SINGLE_COL */
-	{{XM_TXF_SNG_COL, SK_TRUE}, {GM_TXF_SNG_COL, SK_TRUE}},
-	/* SK_PNMI_HTX_MULTI_COL */
-	{{XM_TXF_MUL_COL, SK_TRUE}, {GM_TXF_MUL_COL, SK_TRUE}},
-	/* SK_PNMI_HTX_EXCESS_COL */
-	{{XM_TXF_ABO_COL, SK_TRUE}, {GM_TXF_ABO_COL, SK_TRUE}},
-	/* SK_PNMI_HTX_LATE_COL */
-	{{XM_TXF_LAT_COL, SK_TRUE}, {GM_TXF_LAT_COL, SK_TRUE}},
-	/* SK_PNMI_HTX_DEFFERAL */
-	{{XM_TXF_DEF, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_EXCESS_DEF */
-	{{XM_TXF_EX_DEF, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_UNDERRUN */
-	{{XM_TXE_FIFO_UR, SK_TRUE}, {GM_TXE_FIFO_UR, SK_TRUE}},
-	/* SK_PNMI_HTX_CARRIER */
-	{{XM_TXE_CS_ERR, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_UTILUNDER */
-	{{0, SK_FALSE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_UTILOVER */
-	{{0, SK_FALSE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_64 */
-	{{XM_TXF_64B, SK_TRUE}, {GM_TXF_64B, SK_TRUE}},
-	/* SK_PNMI_HTX_127 */
-	{{XM_TXF_127B, SK_TRUE}, {GM_TXF_127B, SK_TRUE}},
-	/* SK_PNMI_HTX_255 */
-	{{XM_TXF_255B, SK_TRUE}, {GM_TXF_255B, SK_TRUE}},
-	/* SK_PNMI_HTX_511 */
-	{{XM_TXF_511B, SK_TRUE}, {GM_TXF_511B, SK_TRUE}},
-	/* SK_PNMI_HTX_1023 */
-	{{XM_TXF_1023B, SK_TRUE}, {GM_TXF_1023B, SK_TRUE}},
-	/* SK_PNMI_HTX_MAX */
-	{{XM_TXF_MAX_SZ, SK_TRUE}, {GM_TXF_1518B, SK_TRUE}},
-	/* SK_PNMI_HTX_LONGFRAMES  */
-	{{XM_TXF_LONG, SK_TRUE}, {GM_TXF_MAX_SZ, SK_TRUE}},
-	/* SK_PNMI_HTX_SYNC */
-	{{0, SK_FALSE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_SYNC_OCTET */
-	{{0, SK_FALSE}, {0, SK_FALSE}},
-	/* SK_PNMI_HTX_RESERVED */
-	{{0, SK_FALSE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX */
-	{{XM_RXF_OK, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_OCTETHIGH */
-	{{XM_RXO_OK_HI, SK_TRUE}, {GM_RXO_OK_HI, SK_TRUE}},
-	/* SK_PNMI_HRX_OCTETLOW */
-	{{XM_RXO_OK_LO, SK_FALSE}, {GM_RXO_OK_LO, SK_FALSE}},
-	/* SK_PNMI_HRX_BADOCTETHIGH */
-	{{0, SK_FALSE}, {GM_RXO_ERR_HI, SK_TRUE}},
-	/* SK_PNMI_HRX_BADOCTETLOW */
-	{{0, SK_FALSE}, {GM_RXO_ERR_LO, SK_TRUE}},
-	/* SK_PNMI_HRX_BROADCAST */
-	{{XM_RXF_BC_OK, SK_TRUE}, {GM_RXF_BC_OK, SK_TRUE}},
-	/* SK_PNMI_HRX_MULTICAST */
-	{{XM_RXF_MC_OK, SK_TRUE}, {GM_RXF_MC_OK, SK_TRUE}},
-	/* SK_PNMI_HRX_UNICAST */
-	{{XM_RXF_UC_OK, SK_TRUE}, {GM_RXF_UC_OK, SK_TRUE}},
-	/* SK_PNMI_HRX_PMACC */
-	{{XM_RXF_MPAUSE, SK_TRUE}, {GM_RXF_MPAUSE, SK_TRUE}},
-	/* SK_PNMI_HRX_MACC */
-	{{XM_RXF_MCTRL, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_PMACC_ERR */
-	{{XM_RXF_INV_MP, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_MACC_UNKWN */
-	{{XM_RXF_INV_MOC, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_BURST */
-	{{XM_RXE_BURST, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_MISSED */
-	{{XM_RXE_FMISS, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_FRAMING */
-	{{XM_RXF_FRA_ERR, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_UNDERSIZE */
-	{{0, SK_FALSE}, {GM_RXF_SHT, SK_TRUE}},
-	/* SK_PNMI_HRX_OVERFLOW */
-	{{XM_RXE_FIFO_OV, SK_TRUE}, {GM_RXE_FIFO_OV, SK_TRUE}},
-	/* SK_PNMI_HRX_JABBER */
-	{{XM_RXF_JAB_PKT, SK_TRUE}, {GM_RXF_JAB_PKT, SK_TRUE}},
-	/* SK_PNMI_HRX_CARRIER */
-	{{XM_RXE_CAR_ERR, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_IRLENGTH */
-	{{XM_RXF_LEN_ERR, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_SYMBOL */
-	{{XM_RXE_SYM_ERR, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_SHORTS */
-	{{XM_RXE_SHT_ERR, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_RUNT */
-	{{XM_RXE_RUNT, SK_TRUE}, {GM_RXE_FRAG, SK_TRUE}},
-	/* SK_PNMI_HRX_TOO_LONG */
-	{{XM_RXF_LNG_ERR, SK_TRUE}, {GM_RXF_LNG_ERR, SK_TRUE}},
-	/* SK_PNMI_HRX_FCS */
-	{{XM_RXF_FCS_ERR, SK_TRUE}, {GM_RXF_FCS_ERR, SK_TRUE}},
-	/* SK_PNMI_HRX_CEXT */
-	{{XM_RXF_CEX_ERR, SK_TRUE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_UTILUNDER */
-	{{0, SK_FALSE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_UTILOVER */
-	{{0, SK_FALSE}, {0, SK_FALSE}},
-	/* SK_PNMI_HRX_64 */
-	{{XM_RXF_64B, SK_TRUE}, {GM_RXF_64B, SK_TRUE}},
-	/* SK_PNMI_HRX_127 */
-	{{XM_RXF_127B, SK_TRUE}, {GM_RXF_127B, SK_TRUE}},
-	/* SK_PNMI_HRX_255 */
-	{{XM_RXF_255B, SK_TRUE}, {GM_RXF_255B, SK_TRUE}},
-	/* SK_PNMI_HRX_511 */
-	{{XM_RXF_511B, SK_TRUE}, {GM_RXF_511B, SK_TRUE}},
-	/* SK_PNMI_HRX_1023 */
-	{{XM_RXF_1023B, SK_TRUE}, {GM_RXF_1023B, SK_TRUE}},
-	/* SK_PNMI_HRX_MAX */
-	{{XM_RXF_MAX_SZ, SK_TRUE}, {GM_RXF_1518B, SK_TRUE}},
-	/* SK_PNMI_HRX_LONGFRAMES */
-	{{0, SK_FALSE}, {GM_RXF_MAX_SZ, SK_TRUE}},
-	/* SK_PNMI_HRX_RESERVED */
-	{{0, SK_FALSE}, {0, SK_FALSE}}
-};
-
-
-/*****************************************************************************
- *
- * Public functions
- *
- */
-
-/*****************************************************************************
- *
- * SkPnmiInit - Init function of PNMI
- *
- * Description:
- *	SK_INIT_DATA: Initialises the data structures
- *	SK_INIT_IO:   Resets the XMAC statistics, determines the device and
- *	              connector type.
- *	SK_INIT_RUN:  Starts a timer event for port switch per hour
- *	              calculation.
- *
- * Returns:
- *	Always 0
- */
-int SkPnmiInit(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Level)		/* Initialization level */
-{
-	unsigned int	PortMax;	/* Number of ports */
-	unsigned int	PortIndex;	/* Current port index in loop */
-	SK_U16		Val16;		/* Multiple purpose 16 bit variable */
-	SK_U8		Val8;		/* Mulitple purpose 8 bit variable */
-	SK_EVPARA	EventParam;	/* Event struct for timer event */
-	SK_PNMI_VCT	*pVctBackupData;
-
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-		("PNMI: SkPnmiInit: Called, level=%d\n", Level));
-
-	switch (Level) {
-
-	case SK_INIT_DATA:
-		SK_MEMSET((char *)&pAC->Pnmi, 0, sizeof(pAC->Pnmi));
-		pAC->Pnmi.TrapBufFree = SK_PNMI_TRAP_QUEUE_LEN;
-		pAC->Pnmi.StartUpTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
-		pAC->Pnmi.RlmtChangeThreshold = SK_PNMI_DEF_RLMT_CHG_THRES;
-		for (PortIndex = 0; PortIndex < SK_MAX_MACS; PortIndex ++) {
-
-			pAC->Pnmi.Port[PortIndex].ActiveFlag = SK_FALSE;
-			pAC->Pnmi.DualNetActiveFlag = SK_FALSE;
-		}
-
-#ifdef SK_PNMI_CHECK
-		if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) {
-			
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG);
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL,
-					   ("CounterOffset struct size (%d) differs from"
-						"SK_PNMI_MAX_IDX (%d)\n",
-						SK_PNMI_CNT_NO, SK_PNMI_MAX_IDX));
-		}
-
-		if (SK_PNMI_MAX_IDX !=
-			(sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES))) {
-			
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR050, SK_PNMI_ERR050MSG);
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL,
-					   ("StatAddr table size (%d) differs from "
-						"SK_PNMI_MAX_IDX (%d)\n",
-						(sizeof(StatAddr) /
-						 (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)),
-						 SK_PNMI_MAX_IDX));
-		}
-#endif /* SK_PNMI_CHECK */
-		break;
-
-	case SK_INIT_IO:
-		/*
-		 * Reset MAC counters
-		 */
-		PortMax = pAC->GIni.GIMacsFound;
-
-		for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) {
-
-			pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex);
-		}
-		
-		/* Initialize DSP variables for Vct() to 0xff => Never written! */		
-		for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) {
-			pAC->GIni.GP[PortIndex].PCableLen = 0xff;
-			pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex];
-			pVctBackupData->PCableLen = 0xff;
-		}
-		
-		/*
-		 * Get pci bus speed
-		 */
-		SK_IN16(IoC, B0_CTST, &Val16);
-		if ((Val16 & CS_BUS_CLOCK) == 0) {
-
-			pAC->Pnmi.PciBusSpeed = 33;
-		}
-		else {
-			pAC->Pnmi.PciBusSpeed = 66;
-		}
-
-		/*
-		 * Get pci bus width
-		 */
-		SK_IN16(IoC, B0_CTST, &Val16);
-		if ((Val16 & CS_BUS_SLOT_SZ) == 0) {
-
-			pAC->Pnmi.PciBusWidth = 32;
-		}
-		else {
-			pAC->Pnmi.PciBusWidth = 64;
-		}
-
-		/*
-		 * Get chipset
-		 */
-		switch (pAC->GIni.GIChipId) {
-		case CHIP_ID_GENESIS:
-			pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_XMAC;
-			break;
-
-		case CHIP_ID_YUKON:
-			pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_YUKON;
-			break;
-
-		default:
-			break;
-		}
-
-		/*
-		 * Get PMD and DeviceType
-		 */
-		SK_IN8(IoC, B2_PMD_TYP, &Val8);
-		switch (Val8) {
-		case 'S':
-			pAC->Pnmi.PMD = 3;
-			if (pAC->GIni.GIMacsFound > 1) {
-
-				pAC->Pnmi.DeviceType = 0x00020002;
-			}
-			else {
-				pAC->Pnmi.DeviceType = 0x00020001;
-			}
-			break;
-
-		case 'L':
-			pAC->Pnmi.PMD = 2;
-			if (pAC->GIni.GIMacsFound > 1) {
-
-				pAC->Pnmi.DeviceType = 0x00020004;
-			}
-			else {
-				pAC->Pnmi.DeviceType = 0x00020003;
-			}
-			break;
-
-		case 'C':
-			pAC->Pnmi.PMD = 4;
-			if (pAC->GIni.GIMacsFound > 1) {
-
-				pAC->Pnmi.DeviceType = 0x00020006;
-			}
-			else {
-				pAC->Pnmi.DeviceType = 0x00020005;
-			}
-			break;
-
-		case 'T':
-			pAC->Pnmi.PMD = 5;
-			if (pAC->GIni.GIMacsFound > 1) {
-
-				pAC->Pnmi.DeviceType = 0x00020008;
-			}
-			else {
-				pAC->Pnmi.DeviceType = 0x00020007;
-			}
-			break;
-
-		default :
-			pAC->Pnmi.PMD = 1;
-			pAC->Pnmi.DeviceType = 0;
-			break;
-		}
-
-		/*
-		 * Get connector
-		 */
-		SK_IN8(IoC, B2_CONN_TYP, &Val8);
-		switch (Val8) {
-		case 'C':
-			pAC->Pnmi.Connector = 2;
-			break;
-
-		case 'D':
-			pAC->Pnmi.Connector = 3;
-			break;
-
-		case 'F':
-			pAC->Pnmi.Connector = 4;
-			break;
-
-		case 'J':
-			pAC->Pnmi.Connector = 5;
-			break;
-
-		case 'V':
-			pAC->Pnmi.Connector = 6;
-			break;
-
-		default:
-			pAC->Pnmi.Connector = 1;
-			break;
-		}
-		break;
-
-	case SK_INIT_RUN:
-		/*
-		 * Start timer for RLMT change counter
-		 */
-		SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
-		SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer,
-			28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER,
-			EventParam);
-		break;
-
-	default:
-		break; /* Nothing todo */
-	}
-
-	return (0);
-}
-
-/*****************************************************************************
- *
- * SkPnmiGetVar - Retrieves the value of a single OID
- *
- * Description:
- *	Calls a general sub-function for all this stuff. If the instance
- *	-1 is passed, the values of all instances are returned in an
- *	array of values.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to take
- *	                         the data.
- *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-static int SkPnmiGetVar(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-SK_U32 Id,		/* Object ID that is to be processed */
-void *pBuf,		/* Buffer to which the management data will be copied */
-unsigned int *pLen,	/* On call: buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-		("PNMI: SkPnmiGetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
-			Id, *pLen, Instance, NetIndex));
-
-	return (PnmiVar(pAC, IoC, SK_PNMI_GET, Id, (char *)pBuf, pLen,
-		Instance, NetIndex));
-}
-
-/*****************************************************************************
- *
- * SkPnmiPreSetVar - Presets the value of a single OID
- *
- * Description:
- *	Calls a general sub-function for all this stuff. The preset does
- *	the same as a set, but returns just before finally setting the
- *	new value. This is useful to check if a set might be successfull.
- *	If the instance -1 is passed, an array of values is supposed and
- *	all instances of the OID will be set.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-static int SkPnmiPreSetVar(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-SK_U32 Id,		/* Object ID that is to be processed */
-void *pBuf,		/* Buffer to which the management data will be copied */
-unsigned int *pLen,	/* Total length of management data */
-SK_U32 Instance,	/* Instance (1..n) that is to be set or -1 */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-		("PNMI: SkPnmiPreSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
-			Id, *pLen, Instance, NetIndex));
-
-
-	return (PnmiVar(pAC, IoC, SK_PNMI_PRESET, Id, (char *)pBuf, pLen,
-		Instance, NetIndex));
-}
-
-/*****************************************************************************
- *
- * SkPnmiSetVar - Sets the value of a single OID
- *
- * Description:
- *	Calls a general sub-function for all this stuff. The preset does
- *	the same as a set, but returns just before finally setting the
- *	new value. This is useful to check if a set might be successfull.
- *	If the instance -1 is passed, an array of values is supposed and
- *	all instances of the OID will be set.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-int SkPnmiSetVar(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-SK_U32 Id,		/* Object ID that is to be processed */
-void *pBuf,		/* Buffer to which the management data will be copied */
-unsigned int *pLen,	/* Total length of management data */
-SK_U32 Instance,	/* Instance (1..n) that is to be set or -1 */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-		("PNMI: SkPnmiSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n",
-			Id, *pLen, Instance, NetIndex));
-
-	return (PnmiVar(pAC, IoC, SK_PNMI_SET, Id, (char *)pBuf, pLen,
-		Instance, NetIndex));
-}
-
-/*****************************************************************************
- *
- * SkPnmiGetStruct - Retrieves the management database in SK_PNMI_STRUCT_DATA
- *
- * Description:
- *	Runs through the IdTable, queries the single OIDs and stores the
- *	returned data into the management database structure
- *	SK_PNMI_STRUCT_DATA. The offset of the OID in the structure
- *	is stored in the IdTable. The return value of the function will also
- *	be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the
- *	minimum size of SK_PNMI_MIN_STRUCT_SIZE.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to take
- *	                         the data.
- *	SK_PNMI_ERR_UNKNOWN_NET  The requested NetIndex doesn't exist
- */
-int SkPnmiGetStruct(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-void *pBuf,		/* Buffer to which the management data will be copied. */
-unsigned int *pLen,	/* Length of buffer */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	int		Ret;
-	unsigned int	TableIndex;
-	unsigned int	DstOffset;
-	unsigned int	InstanceNo;
-	unsigned int	InstanceCnt;
-	SK_U32		Instance;
-	unsigned int	TmpLen;
-	char		KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE];
-
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-		("PNMI: SkPnmiGetStruct: Called, BufLen=%d, NetIndex=%d\n",
-			*pLen, NetIndex));
-
-	if (*pLen < SK_PNMI_STRUCT_SIZE) {
-
-		if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) {
-
-			SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT,
-				(SK_U32)(-1));
-		}
-
-		*pLen = SK_PNMI_STRUCT_SIZE;
-		return (SK_PNMI_ERR_TOO_SHORT);
-	}
-
-    /*
-     * Check NetIndex
-     */
-	if (NetIndex >= pAC->Rlmt.NumNets) {
-		return (SK_PNMI_ERR_UNKNOWN_NET);
-	}
-
-	/* Update statistic */
-	SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On call");
-
-	if ((Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1)) !=
-		SK_PNMI_ERR_OK) {
-
-		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
-		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-		return (Ret);
-	}
-
-	if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
-
-		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
-		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-		return (Ret);
-	}
-
-	if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
-
-		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
-		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-		return (Ret);
-	}
-
-	/*
-	 * Increment semaphores to indicate that an update was
-	 * already done
-	 */
-	pAC->Pnmi.MacUpdatedFlag ++;
-	pAC->Pnmi.RlmtUpdatedFlag ++;
-	pAC->Pnmi.SirqUpdatedFlag ++;
-
-	/* Get vpd keys for instance calculation */
-	Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &TmpLen);
-	if (Ret != SK_PNMI_ERR_OK) {
-
-		pAC->Pnmi.MacUpdatedFlag --;
-		pAC->Pnmi.RlmtUpdatedFlag --;
-		pAC->Pnmi.SirqUpdatedFlag --;
-
-		SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
-		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
-		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-		return (SK_PNMI_ERR_GENERAL);
-	}
-
-	/* Retrieve values */
-	SK_MEMSET((char *)pBuf, 0, SK_PNMI_STRUCT_SIZE);
-	for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) {
-
-		InstanceNo = IdTable[TableIndex].InstanceNo;
-		for (InstanceCnt = 1; InstanceCnt <= InstanceNo;
-			InstanceCnt ++) {
-
-			DstOffset = IdTable[TableIndex].Offset +
-				(InstanceCnt - 1) *
-				IdTable[TableIndex].StructSize;
-
-			/*
-			 * For the VPD the instance is not an index number
-			 * but the key itself. Determin with the instance
-			 * counter the VPD key to be used.
-			 */
-			if (IdTable[TableIndex].Id == OID_SKGE_VPD_KEY ||
-				IdTable[TableIndex].Id == OID_SKGE_VPD_VALUE ||
-				IdTable[TableIndex].Id == OID_SKGE_VPD_ACCESS ||
-				IdTable[TableIndex].Id == OID_SKGE_VPD_ACTION) {
-
-				SK_STRNCPY((char *)&Instance, KeyArr[InstanceCnt - 1], 4);
-			}
-			else {
-				Instance = (SK_U32)InstanceCnt;
-			}
-
-			TmpLen = *pLen - DstOffset;
-			Ret = IdTable[TableIndex].Func(pAC, IoC, SK_PNMI_GET,
-				IdTable[TableIndex].Id, (char *)pBuf +
-				DstOffset, &TmpLen, Instance, TableIndex, NetIndex);
-
-			/*
-			 * An unknown instance error means that we reached
-			 * the last instance of that variable. Proceed with
-			 * the next OID in the table and ignore the return
-			 * code.
-			 */
-			if (Ret == SK_PNMI_ERR_UNKNOWN_INST) {
-
-                break;
-			}
-
-			if (Ret != SK_PNMI_ERR_OK) {
-
-				pAC->Pnmi.MacUpdatedFlag --;
-				pAC->Pnmi.RlmtUpdatedFlag --;
-				pAC->Pnmi.SirqUpdatedFlag --;
-
-				SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
-				SK_PNMI_SET_STAT(pBuf, Ret, DstOffset);
-				*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-				return (Ret);
-			}
-		}
-	}
-
-	pAC->Pnmi.MacUpdatedFlag --;
-	pAC->Pnmi.RlmtUpdatedFlag --;
-	pAC->Pnmi.SirqUpdatedFlag --;
-
-	*pLen = SK_PNMI_STRUCT_SIZE;
-	SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return");
-	SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1));
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * SkPnmiPreSetStruct - Presets the management database in SK_PNMI_STRUCT_DATA
- *
- * Description:
- *	Calls a general sub-function for all this set stuff. The preset does
- *	the same as a set, but returns just before finally setting the
- *	new value. This is useful to check if a set might be successfull.
- *	The sub-function runs through the IdTable, checks which OIDs are able
- *	to set, and calls the handler function of the OID to perform the
- *	preset. The return value of the function will also be stored in
- *	SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
- *	SK_PNMI_MIN_STRUCT_SIZE.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- */
-int SkPnmiPreSetStruct(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-void *pBuf,		/* Buffer which contains the data to be set */
-unsigned int *pLen,	/* Length of buffer */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-		("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n",
-			*pLen, NetIndex));
-
-	return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf,
-    					pLen, NetIndex));
-}
-
-/*****************************************************************************
- *
- * SkPnmiSetStruct - Sets the management database in SK_PNMI_STRUCT_DATA
- *
- * Description:
- *	Calls a general sub-function for all this set stuff. The return value
- *	of the function will also be stored in SK_PNMI_STRUCT_DATA if the
- *	passed buffer has the minimum size of SK_PNMI_MIN_STRUCT_SIZE.
- *	The sub-function runs through the IdTable, checks which OIDs are able
- *	to set, and calls the handler function of the OID to perform the
- *	set. The return value of the function will also be stored in
- *	SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
- *	SK_PNMI_MIN_STRUCT_SIZE.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- */
-int SkPnmiSetStruct(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-void *pBuf,		/* Buffer which contains the data to be set */
-unsigned int *pLen,	/* Length of buffer */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-		("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n",
-			*pLen, NetIndex));
-
-	return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf,
-    					pLen, NetIndex));
-}
-
-/*****************************************************************************
- *
- * SkPnmiEvent - Event handler
- *
- * Description:
- *	Handles the following events:
- *	SK_PNMI_EVT_SIRQ_OVERFLOW     When a hardware counter overflows an
- *	                              interrupt will be generated which is
- *	                              first handled by SIRQ which generates a
- *	                              this event. The event increments the
- *	                              upper 32 bit of the 64 bit counter.
- *	SK_PNMI_EVT_SEN_XXX           The event is generated by the I2C module
- *	                              when a sensor reports a warning or
- *	                              error. The event will store a trap
- *	                              message in the trap buffer.
- *	SK_PNMI_EVT_CHG_EST_TIMER     The timer event was initiated by this
- *	                              module and is used to calculate the
- *	                              port switches per hour.
- *	SK_PNMI_EVT_CLEAR_COUNTER     The event clears all counters and
- *	                              timestamps.
- *	SK_PNMI_EVT_XMAC_RESET        The event is generated by the driver
- *	                              before a hard reset of the XMAC is
- *	                              performed. All counters will be saved
- *	                              and added to the hardware counter
- *	                              values after reset to grant continuous
- *	                              counter values.
- *	SK_PNMI_EVT_RLMT_PORT_UP      Generated by RLMT to notify that a port
- *	                              went logically up. A trap message will
- *	                              be stored to the trap buffer.
- *	SK_PNMI_EVT_RLMT_PORT_DOWN    Generated by RLMT to notify that a port
- *	                              went logically down. A trap message will
- *	                              be stored to the trap buffer.
- *	SK_PNMI_EVT_RLMT_SEGMENTATION Generated by RLMT to notify that two
- *	                              spanning tree root bridges were
- *	                              detected. A trap message will be stored
- *	                              to the trap buffer.
- *	SK_PNMI_EVT_RLMT_ACTIVE_DOWN  Notifies PNMI that an active port went
- *	                              down. PNMI will not further add the
- *	                              statistic values to the virtual port.
- *	SK_PNMI_EVT_RLMT_ACTIVE_UP    Notifies PNMI that a port went up and
- *	                              is now an active port. PNMI will now
- *	                              add the statistic data of this port to
- *	                              the virtual port.
- *	SK_PNMI_EVT_RLMT_SET_NETS     Notifies PNMI about the net mode. The first parameter
- *	                              contains the number of nets. 1 means single net, 2 means
- *	                              dual net. The second parameter is -1
- *
- * Returns:
- *	Always 0
- */
-int SkPnmiEvent(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-SK_U32 Event,		/* Event-Id */
-SK_EVPARA Param)	/* Event dependent parameter */
-{
-	unsigned int	PhysPortIndex;
-    unsigned int	MaxNetNumber;
-	int			CounterIndex;
-	int			Ret;
-	SK_U16		MacStatus;
-	SK_U64		OverflowStatus;
-	SK_U64		Mask;
-	int			MacType;
-	SK_U64		Value;
-	SK_U32		Val32;
-	SK_U16		Register;
-	SK_EVPARA	EventParam;
-	SK_U64		NewestValue;
-	SK_U64		OldestValue;
-	SK_U64		Delta;
-	SK_PNMI_ESTIMATE *pEst;
-	SK_U32		NetIndex;
-	SK_GEPORT	*pPrt;
-	SK_PNMI_VCT	*pVctBackupData;
-	SK_U32		RetCode;
-	int		i;
-	SK_U32		CableLength;
-
-
-#ifdef DEBUG
-	if (Event != SK_PNMI_EVT_XMAC_RESET) {
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-			("PNMI: SkPnmiEvent: Called, Event=0x%x, Param=0x%x\n",
-			(unsigned int)Event, (unsigned int)Param.Para64));
-	}
-#endif /* DEBUG */
-	SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call");
-
-	MacType = pAC->GIni.GIMacType;
-	
-	switch (Event) {
-
-	case SK_PNMI_EVT_SIRQ_OVERFLOW:
-		PhysPortIndex = (int)Param.Para32[0];
-		MacStatus = (SK_U16)Param.Para32[1];
-#ifdef DEBUG
-		if (PhysPortIndex >= SK_MAX_MACS) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SIRQ_OVERFLOW parameter"
-				 " wrong, PhysPortIndex=0x%x\n",
-				PhysPortIndex));
-			return (0);
-		}
-#endif /* DEBUG */
-		OverflowStatus = 0;
-
-		/*
-		 * Check which source caused an overflow interrupt.
-		 */
-		if ((pAC->GIni.GIFunc.pFnMacOverflow(pAC, IoC, PhysPortIndex,
-				MacStatus, &OverflowStatus) != 0) ||
-			(OverflowStatus == 0)) {
-
-			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
-			return (0);
-		}
-
-		/*
-		 * Check the overflow status register and increment
-		 * the upper dword of corresponding counter.
-		 */
-		for (CounterIndex = 0; CounterIndex < sizeof(Mask) * 8;
-			CounterIndex ++) {
-
-			Mask = (SK_U64)1 << CounterIndex;
-			if ((OverflowStatus & Mask) == 0) {
-
-				continue;
-			}
-
-			switch (StatOvrflwBit[CounterIndex][MacType]) {
-
-			case SK_PNMI_HTX_UTILUNDER:
-			case SK_PNMI_HTX_UTILOVER:
-				if (MacType == SK_MAC_XMAC) {
-					XM_IN16(IoC, PhysPortIndex, XM_TX_CMD, &Register);
-					Register |= XM_TX_SAM_LINE;
-					XM_OUT16(IoC, PhysPortIndex, XM_TX_CMD, Register);
-				}
-				break;
-
-			case SK_PNMI_HRX_UTILUNDER:
-			case SK_PNMI_HRX_UTILOVER:
-				if (MacType == SK_MAC_XMAC) {
-					XM_IN16(IoC, PhysPortIndex, XM_RX_CMD, &Register);
-					Register |= XM_RX_SAM_LINE;
-					XM_OUT16(IoC, PhysPortIndex, XM_RX_CMD, Register);
-				}
-				break;
-
-			case SK_PNMI_HTX_OCTETHIGH:
-			case SK_PNMI_HTX_OCTETLOW:
-			case SK_PNMI_HTX_RESERVED:
-			case SK_PNMI_HRX_OCTETHIGH:
-			case SK_PNMI_HRX_OCTETLOW:
-			case SK_PNMI_HRX_IRLENGTH:
-			case SK_PNMI_HRX_RESERVED:
-			
-			/*
-			 * the following counters aren't be handled (id > 63)
-			 */
-			case SK_PNMI_HTX_SYNC:
-			case SK_PNMI_HTX_SYNC_OCTET:
-				break;
-
-			case SK_PNMI_HRX_LONGFRAMES:
-				if (MacType == SK_MAC_GMAC) {
-					pAC->Pnmi.Port[PhysPortIndex].
-						CounterHigh[CounterIndex] ++;
-				}
-				break;
-
-			default:
-				pAC->Pnmi.Port[PhysPortIndex].
-					CounterHigh[CounterIndex] ++;
-			}
-		}
-		break;
-
-	case SK_PNMI_EVT_SEN_WAR_LOW:
-#ifdef DEBUG
-		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_LOW parameter wrong, SensorIndex=%d\n",
-				(unsigned int)Param.Para64));
-			return (0);
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Store a trap message in the trap buffer and generate
-		 * an event for user space applications with the
-		 * SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_LOW,
-			(unsigned int)Param.Para64);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-		break;
-
-	case SK_PNMI_EVT_SEN_WAR_UPP:
-#ifdef DEBUG
-		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_UPP parameter wrong, SensorIndex=%d\n",
-				(unsigned int)Param.Para64));
-			return (0);
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Store a trap message in the trap buffer and generate
-		 * an event for user space applications with the
-		 * SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_UPP,
-			(unsigned int)Param.Para64);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-		break;
-
-	case SK_PNMI_EVT_SEN_ERR_LOW:
-#ifdef DEBUG
-		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_LOW parameter wrong, SensorIndex=%d\n",
-				(unsigned int)Param.Para64));
-			return (0);
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Store a trap message in the trap buffer and generate
-		 * an event for user space applications with the
-		 * SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_LOW,
-			(unsigned int)Param.Para64);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-		break;
-	
-	case SK_PNMI_EVT_SEN_ERR_UPP:
-#ifdef DEBUG
-		if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_UPP parameter wrong, SensorIndex=%d\n",
-				(unsigned int)Param.Para64));
-			return (0);
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Store a trap message in the trap buffer and generate
-		 * an event for user space applications with the
-		 * SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_UPP,
-			(unsigned int)Param.Para64);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-		break;
-
-	case SK_PNMI_EVT_CHG_EST_TIMER:
-		/*
-		 * Calculate port switch average on a per hour basis
-		 *   Time interval for check       : 28125 ms
-		 *   Number of values for average  : 8
-		 *
-		 * Be careful in changing these values, on change check
-		 *   - typedef of SK_PNMI_ESTIMATE (Size of EstValue
-		 *     array one less than value number)
-		 *   - Timer initialization SkTimerStart() in SkPnmiInit
-		 *   - Delta value below must be multiplicated with
-		 *     power of 2
-		 *
-		 */
-		pEst = &pAC->Pnmi.RlmtChangeEstimate;
-		CounterIndex = pEst->EstValueIndex + 1;
-		if (CounterIndex == 7) {
-
-			CounterIndex = 0;
-		}
-		pEst->EstValueIndex = CounterIndex;
-
-		NewestValue = pAC->Pnmi.RlmtChangeCts;
-		OldestValue = pEst->EstValue[CounterIndex];
-		pEst->EstValue[CounterIndex] = NewestValue;
-
-		/*
-		 * Calculate average. Delta stores the number of
-		 * port switches per 28125 * 8 = 225000 ms
-		 */
-		if (NewestValue >= OldestValue) {
-
-			Delta = NewestValue - OldestValue;
-		}
-		else {
-			/* Overflow situation */
-			Delta = (SK_U64)(0 - OldestValue) + NewestValue;
-		}
-
-		/*
-		 * Extrapolate delta to port switches per hour.
-		 *     Estimate = Delta * (3600000 / 225000)
-		 *              = Delta * 16
-		 *              = Delta << 4
-		 */
-		pAC->Pnmi.RlmtChangeEstimate.Estimate = Delta << 4;
-
-		/*
-		 * Check if threshold is exceeded. If the threshold is
-		 * permanently exceeded every 28125 ms an event will be
-		 * generated to remind the user of this condition.
-		 */
-		if ((pAC->Pnmi.RlmtChangeThreshold != 0) &&
-			(pAC->Pnmi.RlmtChangeEstimate.Estimate >=
-			pAC->Pnmi.RlmtChangeThreshold)) {
-
-			QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_CHANGE_THRES);
-			(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-		}
-
-		SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
-		SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer,
-			28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER,
-			EventParam);
-		break;
-
-	case SK_PNMI_EVT_CLEAR_COUNTER:
-		/*
-		 *  Param.Para32[0] contains the NetIndex (0 ..1).
-		 *  Param.Para32[1] is reserved, contains -1.
-		 */
-		NetIndex = (SK_U32)Param.Para32[0];
-
-#ifdef DEBUG
-		if (NetIndex >= pAC->Rlmt.NumNets) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_CLEAR_COUNTER parameter wrong, NetIndex=%d\n",
-				NetIndex));
-
-			return (0);
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Set all counters and timestamps to zero.
-		 * The according NetIndex is required as a
-		 * parameter of the event.
-		 */
-		ResetCounter(pAC, IoC, NetIndex);
-		break;
-
-	case SK_PNMI_EVT_XMAC_RESET:
-		/*
-		 * To grant continuous counter values store the current
-		 * XMAC statistic values to the entries 1..n of the
-		 * CounterOffset array. XMAC Errata #2
-		 */
-#ifdef DEBUG
-		if ((unsigned int)Param.Para64 >= SK_MAX_MACS) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_XMAC_RESET parameter wrong, PhysPortIndex=%d\n",
-				(unsigned int)Param.Para64));
-			return (0);
-		}
-#endif
-		PhysPortIndex = (unsigned int)Param.Para64;
-
-		/*
-		 * Update XMAC statistic to get fresh values
-		 */
-		Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
-		if (Ret != SK_PNMI_ERR_OK) {
-
-			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
-			return (0);
-		}
-		/*
-		 * Increment semaphore to indicate that an update was
-		 * already done
-		 */
-		pAC->Pnmi.MacUpdatedFlag ++;
-
-		for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
-			CounterIndex ++) {
-
-			if (!StatAddr[CounterIndex][MacType].GetOffset) {
-
-				continue;
-			}
-
-			pAC->Pnmi.Port[PhysPortIndex].CounterOffset[CounterIndex] =
-				GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
-			
-			pAC->Pnmi.Port[PhysPortIndex].CounterHigh[CounterIndex] = 0;
-		}
-
-		pAC->Pnmi.MacUpdatedFlag --;
-		break;
-
-	case SK_PNMI_EVT_RLMT_PORT_UP:
-		PhysPortIndex = (unsigned int)Param.Para32[0];
-#ifdef DEBUG
-		if (PhysPortIndex >= SK_MAX_MACS) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter"
-                 " wrong, PhysPortIndex=%d\n", PhysPortIndex));
-
-			return (0);
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Store a trap message in the trap buffer and generate an event for
-		 * user space applications with the SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_UP, PhysPortIndex);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-
-		/* Bugfix for XMAC errata (#10620)*/
-		if (MacType == SK_MAC_XMAC) {
-			/* Add incremental difference to offset (#10620)*/
-			(void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex,
-				XM_RXE_SHT_ERR, &Val32);
-			
-			Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex].
-				 CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32);
-			pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] +=
-				Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark;
-		}
-		
-		/* Tell VctStatus() that a link was up meanwhile. */
-		pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK;		
-		break;
-
-    case SK_PNMI_EVT_RLMT_PORT_DOWN:
-		PhysPortIndex = (unsigned int)Param.Para32[0];
-
-#ifdef DEBUG
-		if (PhysPortIndex >= SK_MAX_MACS) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter"
-                 " wrong, PhysPortIndex=%d\n", PhysPortIndex));
-
-			return (0);
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Store a trap message in the trap buffer and generate an event for
-		 * user space applications with the SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-
-		/* Bugfix #10620 - get zero level for incremental difference */
-		if (MacType == SK_MAC_XMAC) {
-
-			(void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex,
-				XM_RXE_SHT_ERR, &Val32);
-			
-			pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark =
-				(((SK_U64)pAC->Pnmi.Port[PhysPortIndex].
-				 CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32);
-		}
-		break;
-
-	case SK_PNMI_EVT_RLMT_ACTIVE_DOWN:
-		PhysPortIndex = (unsigned int)Param.Para32[0];
-		NetIndex = (SK_U32)Param.Para32[1];
-
-#ifdef DEBUG
-		if (PhysPortIndex >= SK_MAX_MACS) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, PhysPort=%d\n",
-				PhysPortIndex));
-		}
-
-		if (NetIndex >= pAC->Rlmt.NumNets) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, NetIndex=%d\n",
-				NetIndex));
-		}
-#endif /* DEBUG */
-
-		/*
-		 * For now, ignore event if NetIndex != 0.
-		 */
-		if (Param.Para32[1] != 0) {
-
-			return (0);
-		}
-
-		/*
-		 * Nothing to do if port is already inactive
-		 */
-		if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
-
-			return (0);
-		}
-
-		/*
-		 * Update statistic counters to calculate new offset for the virtual
-		 * port and increment semaphore to indicate that an update was already
-		 * done.
-		 */
-		if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) !=
-			SK_PNMI_ERR_OK) {
-
-			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
-			return (0);
-		}
-		pAC->Pnmi.MacUpdatedFlag ++;
-
-		/*
-		 * Calculate new counter offset for virtual port to grant continous
-		 * counting on port switches. The virtual port consists of all currently
-		 * active ports. The port down event indicates that a port is removed
-		 * from the virtual port. Therefore add the counter value of the removed
-		 * port to the CounterOffset for the virtual port to grant the same
-		 * counter value.
-		 */
-		for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
-			CounterIndex ++) {
-
-			if (!StatAddr[CounterIndex][MacType].GetOffset) {
-
-				continue;
-			}
-
-			Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
-
-			pAC->Pnmi.VirtualCounterOffset[CounterIndex] += Value;
-		}
-
-		/*
-		 * Set port to inactive
-		 */
-		pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_FALSE;
-
-		pAC->Pnmi.MacUpdatedFlag --;
-		break;
-
-	case SK_PNMI_EVT_RLMT_ACTIVE_UP:
-		PhysPortIndex = (unsigned int)Param.Para32[0];
-		NetIndex = (SK_U32)Param.Para32[1];
-
-#ifdef DEBUG
-		if (PhysPortIndex >= SK_MAX_MACS) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, PhysPort=%d\n",
-				PhysPortIndex));
-		}
-
-		if (NetIndex >= pAC->Rlmt.NumNets) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL,
-				("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, NetIndex=%d\n",
-				NetIndex));
-		}
-#endif /* DEBUG */
-
-		/*
-		 * For now, ignore event if NetIndex != 0.
-		 */
-		if (Param.Para32[1] != 0) {
-
-			return (0);
-		}
-
-		/*
-		 * Nothing to do if port is already active
-		 */
-		if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
-
-			return (0);
-		}
-
-		/*
-		 * Statistic maintenance
-		 */
-		pAC->Pnmi.RlmtChangeCts ++;
-		pAC->Pnmi.RlmtChangeTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
-
-		/*
-		 * Store a trap message in the trap buffer and generate an event for
-		 * user space applications with the SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueRlmtNewMacTrap(pAC, PhysPortIndex);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-
-		/*
-		 * Update statistic counters to calculate new offset for the virtual
-		 * port and increment semaphore to indicate that an update was
-		 * already done.
-		 */
-		if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) !=
-			SK_PNMI_ERR_OK) {
-
-			SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
-			return (0);
-		}
-		pAC->Pnmi.MacUpdatedFlag ++;
-
-		/*
-		 * Calculate new counter offset for virtual port to grant continous
-		 * counting on port switches. A new port is added to the virtual port.
-		 * Therefore substract the counter value of the new port from the
-		 * CounterOffset for the virtual port to grant the same value.
-		 */
-		for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX;
-			CounterIndex ++) {
-
-			if (!StatAddr[CounterIndex][MacType].GetOffset) {
-
-				continue;
-			}
-
-			Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex);
-
-			pAC->Pnmi.VirtualCounterOffset[CounterIndex] -= Value;
-		}
-
-		/* Set port to active */
-		pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_TRUE;
-
-		pAC->Pnmi.MacUpdatedFlag --;
-		break;
-
-	case SK_PNMI_EVT_RLMT_SEGMENTATION:
-		/*
-		 * Para.Para32[0] contains the NetIndex.
-		 */
-
-		/*
-		 * Store a trap message in the trap buffer and generate an event for
-		 * user space applications with the SK_DRIVER_SENDEVENT macro.
-		 */
-		QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_SEGMENTATION);
-		(void)SK_DRIVER_SENDEVENT(pAC, IoC);
-		break;
-
-    case SK_PNMI_EVT_RLMT_SET_NETS:
-		/*
-		 *  Param.Para32[0] contains the number of Nets.
-		 *  Param.Para32[1] is reserved, contains -1.
-		 */
-	    /*
-    	 * Check number of nets
-		 */
-		MaxNetNumber = pAC->GIni.GIMacsFound;
-		if (((unsigned int)Param.Para32[0] < 1)
-			|| ((unsigned int)Param.Para32[0] > MaxNetNumber)) {
-			return (SK_PNMI_ERR_UNKNOWN_NET);
-		}
-
-        if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */
-        	pAC->Pnmi.DualNetActiveFlag = SK_FALSE;
-        }
-        else { /* dual net mode */
-        	pAC->Pnmi.DualNetActiveFlag = SK_TRUE;
-        }
-        break;
-
-    case SK_PNMI_EVT_VCT_RESET:
-		PhysPortIndex = Param.Para32[0];
-		pPrt = &pAC->GIni.GP[PhysPortIndex];
-		pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex];
-		
-		if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) {
-			RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE);
-			if (RetCode == 2) {
-				/*
-				 * VCT test is still running.
-				 * Start VCT timer counter again.
-				 */
-				SK_MEMSET((char *) &Param, 0, sizeof(Param));
-				Param.Para32[0] = PhysPortIndex;
-				Param.Para32[1] = -1;
-				SkTimerStart(pAC, IoC,
-					&pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer,
-				4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Param);
-				break;
-			}
-			pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING;
-			pAC->Pnmi.VctStatus[PhysPortIndex] |=
-				(SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE);
-			
-			/* Copy results for later use to PNMI struct. */
-			for (i = 0; i < 4; i++)  {
-				if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) {
-					if ((pPrt->PMdiPairLen[i] > 35) &&
-						(pPrt->PMdiPairLen[i] < 0xff)) {
-						pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH;
-					}
-				}
-				if ((pPrt->PMdiPairLen[i] > 35) &&
-					(pPrt->PMdiPairLen[i] != 0xff)) {
-					CableLength = 1000 *
-						(((175 * pPrt->PMdiPairLen[i]) / 210) - 28);
-				}
-				else {
-					CableLength = 0;
-				}
-				pVctBackupData->PMdiPairLen[i] = CableLength;
-				pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i];
-			}
-			
-			Param.Para32[0] = PhysPortIndex;
-			Param.Para32[1] = -1;
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param);
-			SkEventDispatcher(pAC, IoC);
-		}
-		
-		break;
-
-	default:
-		break;
-	}
-
-	SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return");
-	return (0);
-}
-
-
-/******************************************************************************
- *
- * Private functions
- *
- */
-
-/*****************************************************************************
- *
- * PnmiVar - Gets, presets, and sets single OIDs
- *
- * Description:
- *	Looks up the requested OID, calls the corresponding handler
- *	function, and passes the parameters with the get, preset, or
- *	set command. The function is called by SkGePnmiGetVar,
- *	SkGePnmiPreSetVar, or SkGePnmiSetVar.
- *
- * Returns:
- *	SK_PNMI_ERR_XXX. For details have a look at the description of the
- *	calling functions.
- *	SK_PNMI_ERR_UNKNOWN_NET  The requested NetIndex doesn't exist
- */
-PNMI_STATIC int PnmiVar(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* Total length of pBuf management data  */
-SK_U32 Instance,	/* Instance (1..n) that is to be set or -1 */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	unsigned int	TableIndex;
-	int		Ret;
-
-
-	if ((TableIndex = LookupId(Id)) == (unsigned int)(-1)) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_OID);
-	}
-	
-    /* Check NetIndex */
-	if (NetIndex >= pAC->Rlmt.NumNets) {
-		return (SK_PNMI_ERR_UNKNOWN_NET);
-	}
-
-	SK_PNMI_CHECKFLAGS("PnmiVar: On call");
-
-	Ret = IdTable[TableIndex].Func(pAC, IoC, Action, Id, pBuf, pLen,
-		Instance, TableIndex, NetIndex);
-
-	SK_PNMI_CHECKFLAGS("PnmiVar: On return");
-
-	return (Ret);
-}
-
-/*****************************************************************************
- *
- * PnmiStruct - Presets and Sets data in structure SK_PNMI_STRUCT_DATA
- *
- * Description:
- *	The return value of the function will also be stored in
- *	SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of
- *	SK_PNMI_MIN_STRUCT_SIZE. The sub-function runs through the IdTable,
- *	checks which OIDs are able to set, and calls the handler function of
- *	the OID to perform the set. The return value of the function will
- *	also be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the
- *	minimum size of SK_PNMI_MIN_STRUCT_SIZE. The function is called
- *	by SkGePnmiPreSetStruct and SkGePnmiSetStruct.
- *
- * Returns:
- *	SK_PNMI_ERR_XXX. The codes are described in the calling functions.
- *	SK_PNMI_ERR_UNKNOWN_NET  The requested NetIndex doesn't exist
- */
-PNMI_STATIC int PnmiStruct(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int  Action,	/* PRESET/SET action to be performed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* Length of pBuf management data buffer */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	int		Ret;
-	unsigned int	TableIndex;
-	unsigned int	DstOffset;
-	unsigned int	Len;
-	unsigned int	InstanceNo;
-	unsigned int	InstanceCnt;
-	SK_U32		Instance;
-	SK_U32		Id;
-
-
-	/* Check if the passed buffer has the right size */
-	if (*pLen < SK_PNMI_STRUCT_SIZE) {
-
-		/* Check if we can return the error within the buffer */
-		if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) {
-
-			SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT,
-				(SK_U32)(-1));
-		}
-
-		*pLen = SK_PNMI_STRUCT_SIZE;
-		return (SK_PNMI_ERR_TOO_SHORT);
-	}
-	
-    /* Check NetIndex */
-	if (NetIndex >= pAC->Rlmt.NumNets) {
-		return (SK_PNMI_ERR_UNKNOWN_NET);
-	}
-	
-	SK_PNMI_CHECKFLAGS("PnmiStruct: On call");
-
-	/*
-	 * Update the values of RLMT and SIRQ and increment semaphores to
-	 * indicate that an update was already done.
-	 */
-	if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
-
-		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
-		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-		return (Ret);
-	}
-
-	if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
-
-		SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1));
-		*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-		return (Ret);
-	}
-
-	pAC->Pnmi.RlmtUpdatedFlag ++;
-	pAC->Pnmi.SirqUpdatedFlag ++;
-
-	/* Preset/Set values */
-	for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) {
-
-		if ((IdTable[TableIndex].Access != SK_PNMI_RW) &&
-			(IdTable[TableIndex].Access != SK_PNMI_WO)) {
-
-			continue;
-		}
-
-		InstanceNo = IdTable[TableIndex].InstanceNo;
-		Id = IdTable[TableIndex].Id;
-
-		for (InstanceCnt = 1; InstanceCnt <= InstanceNo;
-			InstanceCnt ++) {
-
-			DstOffset = IdTable[TableIndex].Offset +
-				(InstanceCnt - 1) *
-				IdTable[TableIndex].StructSize;
-
-			/*
-			 * Because VPD multiple instance variables are
-			 * not setable we do not need to evaluate VPD
-			 * instances. Have a look to VPD instance
-			 * calculation in SkPnmiGetStruct().
-			 */
-			Instance = (SK_U32)InstanceCnt;
-
-			/*
-			 * Evaluate needed buffer length
-			 */
-			Len = 0;
-			Ret = IdTable[TableIndex].Func(pAC, IoC,
-				SK_PNMI_GET, IdTable[TableIndex].Id,
-				NULL, &Len, Instance, TableIndex, NetIndex);
-
-			if (Ret == SK_PNMI_ERR_UNKNOWN_INST) {
-
-				break;
-			}
-			if (Ret != SK_PNMI_ERR_TOO_SHORT) {
-
-				pAC->Pnmi.RlmtUpdatedFlag --;
-				pAC->Pnmi.SirqUpdatedFlag --;
-
-				SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
-				SK_PNMI_SET_STAT(pBuf,
-					SK_PNMI_ERR_GENERAL, DstOffset);
-				*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			if (Id == OID_SKGE_VPD_ACTION) {
-
-				switch (*(pBuf + DstOffset)) {
-
-				case SK_PNMI_VPD_CREATE:
-					Len = 3 + *(pBuf + DstOffset + 3);
-					break;
-
-				case SK_PNMI_VPD_DELETE:
-					Len = 3;
-					break;
-
-				default:
-					Len = 1;
-					break;
-				}
-			}
-
-			/* Call the OID handler function */
-			Ret = IdTable[TableIndex].Func(pAC, IoC, Action,
-				IdTable[TableIndex].Id, pBuf + DstOffset,
-				&Len, Instance, TableIndex, NetIndex);
-
-			if (Ret != SK_PNMI_ERR_OK) {
-
-				pAC->Pnmi.RlmtUpdatedFlag --;
-				pAC->Pnmi.SirqUpdatedFlag --;
-
-				SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
-				SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_BAD_VALUE,
-					DstOffset);
-				*pLen = SK_PNMI_MIN_STRUCT_SIZE;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-		}
-	}
-
-	pAC->Pnmi.RlmtUpdatedFlag --;
-	pAC->Pnmi.SirqUpdatedFlag --;
-
-	SK_PNMI_CHECKFLAGS("PnmiStruct: On return");
-	SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1));
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * LookupId - Lookup an OID in the IdTable
- *
- * Description:
- *	Scans the IdTable to find the table entry of an OID.
- *
- * Returns:
- *	The table index or -1 if not found.
- */
-PNMI_STATIC int LookupId(
-SK_U32 Id)		/* Object identifier to be searched */
-{
-	int i;
-
-	for (i = 0; i < ID_TABLE_SIZE; i++) {
-
-		if (IdTable[i].Id == Id) {
-
-			return i;
-		}
-	}
-
-	return (-1);
-}
-
-/*****************************************************************************
- *
- * OidStruct - Handler of OID_SKGE_ALL_DATA
- *
- * Description:
- *	This OID performs a Get/Preset/SetStruct call and returns all data
- *	in a SK_PNMI_STRUCT_DATA structure.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int OidStruct(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	if (Id != OID_SKGE_ALL_DATA) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR003,
-			SK_PNMI_ERR003MSG);
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_GENERAL);
-	}
-
-	/*
-	 * Check instance. We only handle single instance variables
-	 */
-	if (Instance != (SK_U32)(-1) && Instance != 1) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_INST);
-	}
-
-	switch (Action) {
-
-	case SK_PNMI_GET:
-		return (SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex));
-
-	case SK_PNMI_PRESET:
-		return (SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex));
-
-	case SK_PNMI_SET:
-		return (SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex));
-	}
-
-	SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR004, SK_PNMI_ERR004MSG);
-
-	*pLen = 0;
-	return (SK_PNMI_ERR_GENERAL);
-}
-
-/*****************************************************************************
- *
- * Perform - OID handler of OID_SKGE_ACTION
- *
- * Description:
- *	None.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int Perform(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	int	Ret;
-	SK_U32	ActionOp;
-
-
-	/*
-	 * Check instance. We only handle single instance variables
-	 */
-	if (Instance != (SK_U32)(-1) && Instance != 1) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_INST);
-	}
-
-	if (*pLen < sizeof(SK_U32)) {
-
-		*pLen = sizeof(SK_U32);
-		return (SK_PNMI_ERR_TOO_SHORT);
-	}
-
-	/* Check if a get should be performed */
-	if (Action == SK_PNMI_GET) {
-
-		/* A get is easy. We always return the same value */
-		ActionOp = (SK_U32)SK_PNMI_ACT_IDLE;
-		SK_PNMI_STORE_U32(pBuf, ActionOp);
-		*pLen = sizeof(SK_U32);
-
-		return (SK_PNMI_ERR_OK);
-	}
-
-	/* Continue with PRESET/SET action */
-	if (*pLen > sizeof(SK_U32)) {
-
-		return (SK_PNMI_ERR_BAD_VALUE);
-	}
-
-	/* Check if the command is a known one */
-	SK_PNMI_READ_U32(pBuf, ActionOp);
-	if (*pLen > sizeof(SK_U32) ||
-		(ActionOp != SK_PNMI_ACT_IDLE &&
-		ActionOp != SK_PNMI_ACT_RESET &&
-		ActionOp != SK_PNMI_ACT_SELFTEST &&
-		ActionOp != SK_PNMI_ACT_RESETCNT)) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_BAD_VALUE);
-	}
-
-	/* A preset ends here */
-	if (Action == SK_PNMI_PRESET) {
-
-		return (SK_PNMI_ERR_OK);
-	}
-
-	switch (ActionOp) {
-
-	case SK_PNMI_ACT_IDLE:
-		/* Nothing to do */
-		break;
-
-	case SK_PNMI_ACT_RESET:
-		/*
-		 * Perform a driver reset or something that comes near
-		 * to this.
-		 */
-		Ret = SK_DRIVER_RESET(pAC, IoC);
-		if (Ret != 0) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR005,
-				SK_PNMI_ERR005MSG);
-
-			return (SK_PNMI_ERR_GENERAL);
-		}
-		break;
-
-	case SK_PNMI_ACT_SELFTEST:
-		/*
-		 * Perform a driver selftest or something similar to this.
-		 * Currently this feature is not used and will probably
-		 * implemented in another way.
-		 */
-		Ret = SK_DRIVER_SELFTEST(pAC, IoC);
-		pAC->Pnmi.TestResult = Ret;
-		break;
-
-	case SK_PNMI_ACT_RESETCNT:
-		/* Set all counters and timestamps to zero */
-		ResetCounter(pAC, IoC, NetIndex);
-		break;
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR006,
-			SK_PNMI_ERR006MSG);
-
-		return (SK_PNMI_ERR_GENERAL);
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * Mac8023Stat - OID handler of OID_GEN_XXX and OID_802_3_XXX
- *
- * Description:
- *	Retrieves the statistic values of the virtual port (logical
- *	index 0). Only special OIDs of NDIS are handled which consist
- *	of a 32 bit instead of a 64 bit value. The OIDs are public
- *	because perhaps some other platform can use them too.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int Mac8023Stat(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex,	/* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	int     Ret;
-	SK_U64  StatVal;
-	SK_U32  StatVal32;
-	SK_BOOL Is64BitReq = SK_FALSE;
-
-	/*
-	 * Only the active Mac is returned
-	 */
-	if (Instance != (SK_U32)(-1) && Instance != 1) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_INST);
-	}
-
-	/*
-	 * Check action type
-	 */
-	if (Action != SK_PNMI_GET) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_READ_ONLY);
-	}
-
-	/* Check length */
-	switch (Id) {
-
-	case OID_802_3_PERMANENT_ADDRESS:
-	case OID_802_3_CURRENT_ADDRESS:
-		if (*pLen < sizeof(SK_MAC_ADDR)) {
-
-			*pLen = sizeof(SK_MAC_ADDR);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	default:
-#ifndef SK_NDIS_64BIT_CTR
-		if (*pLen < sizeof(SK_U32)) {
-			*pLen = sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-
-#else /* SK_NDIS_64BIT_CTR */
-
-		/* for compatibility, at least 32bit are required for OID */
-		if (*pLen < sizeof(SK_U32)) {
-			/*
-			* but indicate handling for 64bit values,
-			* if insufficient space is provided
-			*/
-			*pLen = sizeof(SK_U64);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-
-		Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE;
-#endif /* SK_NDIS_64BIT_CTR */
-		break;
-	}
-
-	/*
-	 * Update all statistics, because we retrieve virtual MAC, which
-	 * consists of multiple physical statistics and increment semaphore
-	 * to indicate that an update was already done.
-	 */
-	Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
-	if ( Ret != SK_PNMI_ERR_OK) {
-
-		*pLen = 0;
-		return (Ret);
-	}
-	pAC->Pnmi.MacUpdatedFlag ++;
-
-	/*
-	 * Get value (MAC Index 0 identifies the virtual MAC)
-	 */
-	switch (Id) {
-
-	case OID_802_3_PERMANENT_ADDRESS:
-		CopyMac(pBuf, &pAC->Addr.Net[NetIndex].PermanentMacAddress);
-		*pLen = sizeof(SK_MAC_ADDR);
-		break;
-
-	case OID_802_3_CURRENT_ADDRESS:
-		CopyMac(pBuf, &pAC->Addr.Net[NetIndex].CurrentMacAddress);
-		*pLen = sizeof(SK_MAC_ADDR);
-		break;
-
-	default:
-		StatVal = GetStatVal(pAC, IoC, 0, IdTable[TableIndex].Param, NetIndex);
-
-		/* by default 32bit values are evaluated */
-		if (!Is64BitReq) {
-			StatVal32 = (SK_U32)StatVal;
-			SK_PNMI_STORE_U32(pBuf, StatVal32);
-			*pLen = sizeof(SK_U32);
-		}
-		else {
-			SK_PNMI_STORE_U64(pBuf, StatVal);
-			*pLen = sizeof(SK_U64);
-		}
-		break;
-	}
-
-	pAC->Pnmi.MacUpdatedFlag --;
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * MacPrivateStat - OID handler function of OID_SKGE_STAT_XXX
- *
- * Description:
- *	Retrieves the MAC statistic data.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int MacPrivateStat(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	unsigned int	LogPortMax;
-	unsigned int	LogPortIndex;
-	unsigned int	PhysPortMax;
-	unsigned int	Limit;
-	unsigned int	Offset;
-	int				MacType;
-	int				Ret;
-	SK_U64			StatVal;
-	
-	
-
-	/* Calculate instance if wished. MAC index 0 is the virtual MAC */
-	PhysPortMax = pAC->GIni.GIMacsFound;
-	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
-	
-	MacType = pAC->GIni.GIMacType;
-
-	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
-		LogPortMax--;
-	}
-
-	if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
-		/* Check instance range */
-		if ((Instance < 1) || (Instance > LogPortMax)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-		LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
-		Limit = LogPortIndex + 1;
-	}
-
-	else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
-
-		LogPortIndex = 0;
-		Limit = LogPortMax;
-	}
-
-	/* Check action */
-	if (Action != SK_PNMI_GET) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_READ_ONLY);
-	}
-
-	/* Check length */
-	if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U64)) {
-
-		*pLen = (Limit - LogPortIndex) * sizeof(SK_U64);
-		return (SK_PNMI_ERR_TOO_SHORT);
-	}
-
-	/*
-	 * Update MAC statistic and increment semaphore to indicate that
-	 * an update was already done.
-	 */
-	Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
-	if (Ret != SK_PNMI_ERR_OK) {
-
-		*pLen = 0;
-		return (Ret);
-	}
-	pAC->Pnmi.MacUpdatedFlag ++;
-
-	/* Get value */
-	Offset = 0;
-	for (; LogPortIndex < Limit; LogPortIndex ++) {
-
-		switch (Id) {
-
-/* XXX not yet implemented due to XMAC problems
-		case OID_SKGE_STAT_TX_UTIL:
-			return (SK_PNMI_ERR_GENERAL);
-*/
-/* XXX not yet implemented due to XMAC problems
-		case OID_SKGE_STAT_RX_UTIL:
-			return (SK_PNMI_ERR_GENERAL);
-*/
-		case OID_SKGE_STAT_RX:
-			if (MacType == SK_MAC_GMAC) {
-				StatVal =
-					GetStatVal(pAC, IoC, LogPortIndex,
-							   SK_PNMI_HRX_BROADCAST, NetIndex) +
-					GetStatVal(pAC, IoC, LogPortIndex,
-							   SK_PNMI_HRX_MULTICAST, NetIndex) +
-					GetStatVal(pAC, IoC, LogPortIndex,
-							   SK_PNMI_HRX_UNICAST, NetIndex) +
-					GetStatVal(pAC, IoC, LogPortIndex,
-							   SK_PNMI_HRX_UNDERSIZE, NetIndex);
-			}
-			else {
-				StatVal = GetStatVal(pAC, IoC, LogPortIndex,
-					IdTable[TableIndex].Param, NetIndex);
-			}
-			break;
-
-		case OID_SKGE_STAT_TX:
-			if (MacType == SK_MAC_GMAC) {
-				StatVal =
-					GetStatVal(pAC, IoC, LogPortIndex,
-							   SK_PNMI_HTX_BROADCAST, NetIndex) +
-					GetStatVal(pAC, IoC, LogPortIndex,
-							   SK_PNMI_HTX_MULTICAST, NetIndex) +
-					GetStatVal(pAC, IoC, LogPortIndex,
-							   SK_PNMI_HTX_UNICAST, NetIndex);
-			}
-			else {
-				StatVal = GetStatVal(pAC, IoC, LogPortIndex,
-					IdTable[TableIndex].Param, NetIndex);
-			}
-			break;
-
-		default:
-			StatVal = GetStatVal(pAC, IoC, LogPortIndex,
-				IdTable[TableIndex].Param, NetIndex);
-		}
-		SK_PNMI_STORE_U64(pBuf + Offset, StatVal);
-
-		Offset += sizeof(SK_U64);
-	}
-	*pLen = Offset;
-
-	pAC->Pnmi.MacUpdatedFlag --;
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * Addr - OID handler function of OID_SKGE_PHYS_CUR_ADDR and _FAC_ADDR
- *
- * Description:
- *	Get/Presets/Sets the current and factory MAC address. The MAC
- *	address of the virtual port, which is reported to the OS, may
- *	not be changed, but the physical ones. A set to the virtual port
- *	will be ignored. No error should be reported because otherwise
- *	a multiple instance set (-1) would always fail.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int Addr(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	int		Ret;
-	unsigned int	LogPortMax;
-	unsigned int	PhysPortMax;
-	unsigned int	LogPortIndex;
-	unsigned int	PhysPortIndex;
-	unsigned int	Limit;
-	unsigned int	Offset = 0;
-
-	/*
-	 * Calculate instance if wished. MAC index 0 is the virtual
-	 * MAC.
-	 */
-	PhysPortMax = pAC->GIni.GIMacsFound;
-	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
-
-	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
-		LogPortMax--;
-	}
-
-	if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
-		/* Check instance range */
-		if ((Instance < 1) || (Instance > LogPortMax)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-		LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
-		Limit = LogPortIndex + 1;
-	}
-	else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
-
-		LogPortIndex = 0;
-		Limit = LogPortMax;
-	}
-
-	/*
-	 * Perform Action
-	 */
-	if (Action == SK_PNMI_GET) {
-
-		/* Check length */
-		if (*pLen < (Limit - LogPortIndex) * 6) {
-
-			*pLen = (Limit - LogPortIndex) * 6;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-
-		/*
-		 * Get value
-		 */
-		for (; LogPortIndex < Limit; LogPortIndex ++) {
-
-			switch (Id) {
-
-			case OID_SKGE_PHYS_CUR_ADDR:
-				if (LogPortIndex == 0) {
-					CopyMac(pBuf + Offset, &pAC->Addr.Net[NetIndex].CurrentMacAddress);
-				}
-				else {
-					PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
-
-					CopyMac(pBuf + Offset,
-						&pAC->Addr.Port[PhysPortIndex].CurrentMacAddress);
-				}
-				Offset += 6;
-				break;
-
-			case OID_SKGE_PHYS_FAC_ADDR:
-				if (LogPortIndex == 0) {
-					CopyMac(pBuf + Offset,
-						&pAC->Addr.Net[NetIndex].PermanentMacAddress);
-				}
-				else {
-					PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-						pAC, LogPortIndex);
-
-					CopyMac(pBuf + Offset,
-						&pAC->Addr.Port[PhysPortIndex].PermanentMacAddress);
-				}
-				Offset += 6;
-				break;
-
-			default:
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR008,
-					SK_PNMI_ERR008MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-		}
-
-		*pLen = Offset;
-	}
-	else {
-		/*
-		 * The logical MAC address may not be changed only
-		 * the physical ones
-		 */
-		if (Id == OID_SKGE_PHYS_FAC_ADDR) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_READ_ONLY);
-		}
-
-		/*
-		 * Only the current address may be changed
-		 */
-		if (Id != OID_SKGE_PHYS_CUR_ADDR) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR009,
-				SK_PNMI_ERR009MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		/* Check length */
-		if (*pLen < (Limit - LogPortIndex) * 6) {
-
-			*pLen = (Limit - LogPortIndex) * 6;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		if (*pLen > (Limit - LogPortIndex) * 6) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_BAD_VALUE);
-		}
-
-		/*
-		 * Check Action
-		 */
-		if (Action == SK_PNMI_PRESET) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_OK);
-		}
-
-		/*
-		 * Set OID_SKGE_MAC_CUR_ADDR
-		 */
-		for (; LogPortIndex < Limit; LogPortIndex ++, Offset += 6) {
-
-			/*
-			 * A set to virtual port and set of broadcast
-			 * address will be ignored
-			 */
-			if (LogPortIndex == 0 || SK_MEMCMP(pBuf + Offset,
-				"\xff\xff\xff\xff\xff\xff", 6) == 0) {
-
-				continue;
-			}
-
-			PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC,
-				LogPortIndex);
-
-			Ret = SkAddrOverride(pAC, IoC, PhysPortIndex,
-				(SK_MAC_ADDR *)(pBuf + Offset),
-				(LogPortIndex == 0 ? SK_ADDR_VIRTUAL_ADDRESS :
-				SK_ADDR_PHYSICAL_ADDRESS));
-			if (Ret != SK_ADDR_OVERRIDE_SUCCESS) {
-
-				return (SK_PNMI_ERR_GENERAL);
-			}
-		}
-		*pLen = Offset;
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * CsumStat - OID handler function of OID_SKGE_CHKSM_XXX
- *
- * Description:
- *	Retrieves the statistic values of the CSUM module. The CSUM data
- *	structure must be available in the SK_AC even if the CSUM module
- *	is not included, because PNMI reads the statistic data from the
- *	CSUM part of SK_AC directly.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int CsumStat(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	unsigned int	Index;
-	unsigned int	Limit;
-	unsigned int	Offset = 0;
-	SK_U64		StatVal;
-
-
-	/*
-	 * Calculate instance if wished
-	 */
-	if (Instance != (SK_U32)(-1)) {
-
-		if ((Instance < 1) || (Instance > SKCS_NUM_PROTOCOLS)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-		Index = (unsigned int)Instance - 1;
-		Limit = Index + 1;
-	}
-	else {
-		Index = 0;
-		Limit = SKCS_NUM_PROTOCOLS;
-	}
-
-	/*
-	 * Check action
-	 */
-	if (Action != SK_PNMI_GET) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_READ_ONLY);
-	}
-
-	/* Check length */
-	if (*pLen < (Limit - Index) * sizeof(SK_U64)) {
-
-		*pLen = (Limit - Index) * sizeof(SK_U64);
-		return (SK_PNMI_ERR_TOO_SHORT);
-	}
-
-	/*
-	 * Get value
-	 */
-	for (; Index < Limit; Index ++) {
-
-		switch (Id) {
-
-		case OID_SKGE_CHKSM_RX_OK_CTS:
-			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxOkCts;
-			break;
-
-		case OID_SKGE_CHKSM_RX_UNABLE_CTS:
-			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxUnableCts;
-			break;
-
-		case OID_SKGE_CHKSM_RX_ERR_CTS:
-			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxErrCts;
-			break;
-
-		case OID_SKGE_CHKSM_TX_OK_CTS:
-			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxOkCts;
-			break;
-
-		case OID_SKGE_CHKSM_TX_UNABLE_CTS:
-			StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxUnableCts;
-			break;
-
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR010,
-				SK_PNMI_ERR010MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		SK_PNMI_STORE_U64(pBuf + Offset, StatVal);
-		Offset += sizeof(SK_U64);
-	}
-
-	/*
-	 * Store used buffer space
-	 */
-	*pLen = Offset;
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * SensorStat - OID handler function of OID_SKGE_SENSOR_XXX
- *
- * Description:
- *	Retrieves the statistic values of the I2C module, which handles
- *	the temperature and voltage sensors.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int SensorStat(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	unsigned int	i;
-	unsigned int	Index;
-	unsigned int	Limit;
-	unsigned int	Offset;
-	unsigned int	Len;
-	SK_U32		Val32;
-	SK_U64		Val64;
-
-
-	/*
-	 * Calculate instance if wished
-	 */
-	if ((Instance != (SK_U32)(-1))) {
-
-		if ((Instance < 1) || (Instance > (SK_U32)pAC->I2c.MaxSens)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-
-		Index = (unsigned int)Instance -1;
-		Limit = (unsigned int)Instance;
-	}
-	else {
-		Index = 0;
-		Limit = (unsigned int) pAC->I2c.MaxSens;
-	}
-
-	/*
-	 * Check action
-	 */
-	if (Action != SK_PNMI_GET) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_READ_ONLY);
-	}
-
-	/* Check length */
-	switch (Id) {
-
-	case OID_SKGE_SENSOR_VALUE:
-	case OID_SKGE_SENSOR_WAR_THRES_LOW:
-	case OID_SKGE_SENSOR_WAR_THRES_UPP:
-	case OID_SKGE_SENSOR_ERR_THRES_LOW:
-	case OID_SKGE_SENSOR_ERR_THRES_UPP:
-		if (*pLen < (Limit - Index) * sizeof(SK_U32)) {
-
-			*pLen = (Limit - Index) * sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	case OID_SKGE_SENSOR_DESCR:
-		for (Offset = 0, i = Index; i < Limit; i ++) {
-
-			Len = (unsigned int)
-				SK_STRLEN(pAC->I2c.SenTable[i].SenDesc) + 1;
-			if (Len >= SK_PNMI_STRINGLEN2) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR011,
-					SK_PNMI_ERR011MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			Offset += Len;
-		}
-		if (*pLen < Offset) {
-
-			*pLen = Offset;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	case OID_SKGE_SENSOR_INDEX:
-	case OID_SKGE_SENSOR_TYPE:
-	case OID_SKGE_SENSOR_STATUS:
-		if (*pLen < Limit - Index) {
-
-			*pLen = Limit - Index;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	case OID_SKGE_SENSOR_WAR_CTS:
-	case OID_SKGE_SENSOR_WAR_TIME:
-	case OID_SKGE_SENSOR_ERR_CTS:
-	case OID_SKGE_SENSOR_ERR_TIME:
-		if (*pLen < (Limit - Index) * sizeof(SK_U64)) {
-
-			*pLen = (Limit - Index) * sizeof(SK_U64);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR012,
-			SK_PNMI_ERR012MSG);
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_GENERAL);
-
-	}
-
-	/*
-	 * Get value
-	 */
-	for (Offset = 0; Index < Limit; Index ++) {
-
-		switch (Id) {
-
-		case OID_SKGE_SENSOR_INDEX:
-			*(pBuf + Offset) = (char)Index;
-			Offset += sizeof(char);
-			break;
-
-		case OID_SKGE_SENSOR_DESCR:
-			Len = SK_STRLEN(pAC->I2c.SenTable[Index].SenDesc);
-			SK_MEMCPY(pBuf + Offset + 1,
-				pAC->I2c.SenTable[Index].SenDesc, Len);
-			*(pBuf + Offset) = (char)Len;
-			Offset += Len + 1;
-			break;
-
-		case OID_SKGE_SENSOR_TYPE:
-			*(pBuf + Offset) =
-				(char)pAC->I2c.SenTable[Index].SenType;
-			Offset += sizeof(char);
-			break;
-
-		case OID_SKGE_SENSOR_VALUE:
-			Val32 = (SK_U32)pAC->I2c.SenTable[Index].SenValue;
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-			Offset += sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_SENSOR_WAR_THRES_LOW:
-			Val32 = (SK_U32)pAC->I2c.SenTable[Index].
-				SenThreWarnLow;
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-			Offset += sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_SENSOR_WAR_THRES_UPP:
-			Val32 = (SK_U32)pAC->I2c.SenTable[Index].
-				SenThreWarnHigh;
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-			Offset += sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_SENSOR_ERR_THRES_LOW:
-			Val32 = (SK_U32)pAC->I2c.SenTable[Index].
-				SenThreErrLow;
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-			Offset += sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_SENSOR_ERR_THRES_UPP:
-			Val32 = pAC->I2c.SenTable[Index].SenThreErrHigh;
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-			Offset += sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_SENSOR_STATUS:
-			*(pBuf + Offset) =
-				(char)pAC->I2c.SenTable[Index].SenErrFlag;
-			Offset += sizeof(char);
-			break;
-
-		case OID_SKGE_SENSOR_WAR_CTS:
-			Val64 = pAC->I2c.SenTable[Index].SenWarnCts;
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_SENSOR_ERR_CTS:
-			Val64 = pAC->I2c.SenTable[Index].SenErrCts;
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_SENSOR_WAR_TIME:
-			Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index].
-				SenBegWarnTS);
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_SENSOR_ERR_TIME:
-			Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index].
-				SenBegErrTS);
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		default:
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
-				("SensorStat: Unknown OID should be handled before"));
-
-			return (SK_PNMI_ERR_GENERAL);
-		}
-	}
-
-	/*
-	 * Store used buffer space
-	 */
-	*pLen = Offset;
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * Vpd - OID handler function of OID_SKGE_VPD_XXX
- *
- * Description:
- *	Get/preset/set of VPD data. As instance the name of a VPD key
- *	can be passed. The Instance parameter is a SK_U32 and can be
- *	used as a string buffer for the VPD key, because their maximum
- *	length is 4 byte.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int Vpd(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	SK_VPD_STATUS	*pVpdStatus;
-	unsigned int	BufLen;
-	char		Buf[256];
-	char		KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE];
-	char		KeyStr[SK_PNMI_VPD_KEY_SIZE];
-	unsigned int	KeyNo;
-	unsigned int	Offset;
-	unsigned int	Index;
-	unsigned int	FirstIndex;
-	unsigned int	LastIndex;
-	unsigned int	Len;
-	int		Ret;
-	SK_U32		Val32;
-
-	/*
-	 * Get array of all currently stored VPD keys
-	 */
-	Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &KeyNo);
-	if (Ret != SK_PNMI_ERR_OK) {
-		*pLen = 0;
-		return (Ret);
-	}
-
-	/*
-	 * If instance is not -1, try to find the requested VPD key for
-	 * the multiple instance variables. The other OIDs as for example
-	 * OID VPD_ACTION are single instance variables and must be
-	 * handled separatly.
-	 */
-	FirstIndex = 0;
-	LastIndex = KeyNo;
-
-	if ((Instance != (SK_U32)(-1))) {
-
-		if (Id == OID_SKGE_VPD_KEY || Id == OID_SKGE_VPD_VALUE ||
-			Id == OID_SKGE_VPD_ACCESS) {
-
-			SK_STRNCPY(KeyStr, (char *)&Instance, 4);
-			KeyStr[4] = 0;
-
-			for (Index = 0; Index < KeyNo; Index ++) {
-
-				if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) {
-					FirstIndex = Index;
-					LastIndex = Index+1;
-					break;
-				}
-			}
-			if (Index == KeyNo) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_UNKNOWN_INST);
-			}
-		}
-		else if (Instance != 1) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-	}
-
-	/*
-	 * Get value, if a query should be performed
-	 */
-	if (Action == SK_PNMI_GET) {
-
-		switch (Id) {
-
-		case OID_SKGE_VPD_FREE_BYTES:
-			/* Check length of buffer */
-			if (*pLen < sizeof(SK_U32)) {
-
-				*pLen = sizeof(SK_U32);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			/* Get number of free bytes */
-			pVpdStatus = VpdStat(pAC, IoC);
-			if (pVpdStatus == NULL) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR017,
-					SK_PNMI_ERR017MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			if ((pVpdStatus->vpd_status & VPD_VALID) == 0) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR018,
-					SK_PNMI_ERR018MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			
-			Val32 = (SK_U32)pVpdStatus->vpd_free_rw;
-			SK_PNMI_STORE_U32(pBuf, Val32);
-			*pLen = sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_VPD_ENTRIES_LIST:
-			/* Check length */
-			for (Len = 0, Index = 0; Index < KeyNo; Index ++) {
-
-				Len += SK_STRLEN(KeyArr[Index]) + 1;
-			}
-			if (*pLen < Len) {
-
-				*pLen = Len;
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-
-			/* Get value */
-			*(pBuf) = (char)Len - 1;
-			for (Offset = 1, Index = 0; Index < KeyNo; Index ++) {
-
-				Len = SK_STRLEN(KeyArr[Index]);
-				SK_MEMCPY(pBuf + Offset, KeyArr[Index], Len);
-
-				Offset += Len;
-
-				if (Index < KeyNo - 1) {
-
-					*(pBuf + Offset) = ' ';
-					Offset ++;
-				}
-			}
-			*pLen = Offset;
-			break;
-
-		case OID_SKGE_VPD_ENTRIES_NUMBER:
-			/* Check length */
-			if (*pLen < sizeof(SK_U32)) {
-
-				*pLen = sizeof(SK_U32);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-
-			Val32 = (SK_U32)KeyNo;
-			SK_PNMI_STORE_U32(pBuf, Val32);
-			*pLen = sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_VPD_KEY:
-			/* Check buffer length, if it is large enough */
-			for (Len = 0, Index = FirstIndex;
-				Index < LastIndex; Index ++) {
-
-				Len += SK_STRLEN(KeyArr[Index]) + 1;
-			}
-			if (*pLen < Len) {
-
-				*pLen = Len;
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-
-			/*
-			 * Get the key to an intermediate buffer, because
-			 * we have to prepend a length byte.
-			 */
-			for (Offset = 0, Index = FirstIndex;
-				Index < LastIndex; Index ++) {
-
-				Len = SK_STRLEN(KeyArr[Index]);
-
-				*(pBuf + Offset) = (char)Len;
-				SK_MEMCPY(pBuf + Offset + 1, KeyArr[Index],
-					Len);
-				Offset += Len + 1;
-			}
-			*pLen = Offset;
-			break;
-
-		case OID_SKGE_VPD_VALUE:
-			/* Check the buffer length if it is large enough */
-			for (Offset = 0, Index = FirstIndex;
-				Index < LastIndex; Index ++) {
-
-				BufLen = 256;
-				if (VpdRead(pAC, IoC, KeyArr[Index], Buf,
-					(int *)&BufLen) > 0 ||
-					BufLen >= SK_PNMI_VPD_DATALEN) {
-
-					SK_ERR_LOG(pAC, SK_ERRCL_SW,
-						SK_PNMI_ERR021,
-						SK_PNMI_ERR021MSG);
-
-					return (SK_PNMI_ERR_GENERAL);
-				}
-				Offset += BufLen + 1;
-			}
-			if (*pLen < Offset) {
-
-				*pLen = Offset;
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-
-			/*
-			 * Get the value to an intermediate buffer, because
-			 * we have to prepend a length byte.
-			 */
-			for (Offset = 0, Index = FirstIndex;
-				Index < LastIndex; Index ++) {
-
-				BufLen = 256;
-				if (VpdRead(pAC, IoC, KeyArr[Index], Buf,
-					(int *)&BufLen) > 0 ||
-					BufLen >= SK_PNMI_VPD_DATALEN) {
-
-					SK_ERR_LOG(pAC, SK_ERRCL_SW,
-						SK_PNMI_ERR022,
-						SK_PNMI_ERR022MSG);
-
-					*pLen = 0;
-					return (SK_PNMI_ERR_GENERAL);
-				}
-
-				*(pBuf + Offset) = (char)BufLen;
-				SK_MEMCPY(pBuf + Offset + 1, Buf, BufLen);
-				Offset += BufLen + 1;
-			}
-			*pLen = Offset;
-			break;
-
-		case OID_SKGE_VPD_ACCESS:
-			if (*pLen < LastIndex - FirstIndex) {
-
-				*pLen = LastIndex - FirstIndex;
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-
-			for (Offset = 0, Index = FirstIndex;
-				Index < LastIndex; Index ++) {
-
-				if (VpdMayWrite(KeyArr[Index])) {
-
-					*(pBuf + Offset) = SK_PNMI_VPD_RW;
-				}
-				else {
-					*(pBuf + Offset) = SK_PNMI_VPD_RO;
-				}
-				Offset ++;
-			}
-			*pLen = Offset;
-			break;
-
-		case OID_SKGE_VPD_ACTION:
-			Offset = LastIndex - FirstIndex;
-			if (*pLen < Offset) {
-
-				*pLen = Offset;
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			SK_MEMSET(pBuf, 0, Offset);
-			*pLen = Offset;
-			break;
-
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR023,
-				SK_PNMI_ERR023MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-	}
-	else {
-		/* The only OID which can be set is VPD_ACTION */
-		if (Id != OID_SKGE_VPD_ACTION) {
-
-			if (Id == OID_SKGE_VPD_FREE_BYTES ||
-				Id == OID_SKGE_VPD_ENTRIES_LIST ||
-				Id == OID_SKGE_VPD_ENTRIES_NUMBER ||
-				Id == OID_SKGE_VPD_KEY ||
-				Id == OID_SKGE_VPD_VALUE ||
-				Id == OID_SKGE_VPD_ACCESS) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_READ_ONLY);
-			}
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR024,
-				SK_PNMI_ERR024MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		/*
-		 * From this point we handle VPD_ACTION. Check the buffer
-		 * length. It should at least have the size of one byte.
-		 */
-		if (*pLen < 1) {
-
-			*pLen = 1;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-
-		/*
-		 * The first byte contains the VPD action type we should
-		 * perform.
-		 */
-		switch (*pBuf) {
-
-		case SK_PNMI_VPD_IGNORE:
-			/* Nothing to do */
-			break;
-
-		case SK_PNMI_VPD_CREATE:
-			/*
-			 * We have to create a new VPD entry or we modify
-			 * an existing one. Check first the buffer length.
-			 */
-			if (*pLen < 4) {
-
-				*pLen = 4;
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			KeyStr[0] = pBuf[1];
-			KeyStr[1] = pBuf[2];
-			KeyStr[2] = 0;
-
-			/*
-			 * Is the entry writable or does it belong to the
-			 * read-only area?
-			 */
-			if (!VpdMayWrite(KeyStr)) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-
-			Offset = (int)pBuf[3] & 0xFF;
-
-			SK_MEMCPY(Buf, pBuf + 4, Offset);
-			Buf[Offset] = 0;
-
-			/* A preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				return (SK_PNMI_ERR_OK);
-			}
-
-			/* Write the new entry or modify an existing one */
-			Ret = VpdWrite(pAC, IoC, KeyStr, Buf);
-			if (Ret == SK_PNMI_VPD_NOWRITE ) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-			else if (Ret != SK_PNMI_VPD_OK) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR025,
-					SK_PNMI_ERR025MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-
-			/*
-			 * Perform an update of the VPD data. This is
-			 * not mandantory, but just to be sure.
-			 */
-			Ret = VpdUpdate(pAC, IoC);
-			if (Ret != SK_PNMI_VPD_OK) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR026,
-					SK_PNMI_ERR026MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			break;
-
-		case SK_PNMI_VPD_DELETE:
-			/* Check if the buffer size is plausible */
-			if (*pLen < 3) {
-
-				*pLen = 3;
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			if (*pLen > 3) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-			KeyStr[0] = pBuf[1];
-			KeyStr[1] = pBuf[2];
-			KeyStr[2] = 0;
-
-			/* Find the passed key in the array */
-			for (Index = 0; Index < KeyNo; Index ++) {
-
-				if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) {
-
-					break;
-				}
-			}
-			/*
-			 * If we cannot find the key it is wrong, so we
-			 * return an appropriate error value.
-			 */
-			if (Index == KeyNo) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-
-			if (Action == SK_PNMI_PRESET) {
-
-				return (SK_PNMI_ERR_OK);
-			}
-
-			/* Ok, you wanted it and you will get it */
-			Ret = VpdDelete(pAC, IoC, KeyStr);
-			if (Ret != SK_PNMI_VPD_OK) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR027,
-					SK_PNMI_ERR027MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-
-			/*
-			 * Perform an update of the VPD data. This is
-			 * not mandantory, but just to be sure.
-			 */
-			Ret = VpdUpdate(pAC, IoC);
-			if (Ret != SK_PNMI_VPD_OK) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR028,
-					SK_PNMI_ERR028MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			break;
-
-		default:
-			*pLen = 0;
-			return (SK_PNMI_ERR_BAD_VALUE);
-		}
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * General - OID handler function of various single instance OIDs
- *
- * Description:
- *	The code is simple. No description necessary.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int General(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	int		Ret;
-	unsigned int	Index;
-	unsigned int	Len;
-	unsigned int	Offset;
-	unsigned int	Val;
-	SK_U8		Val8;
-	SK_U16		Val16;
-	SK_U32		Val32;
-	SK_U64		Val64;
-	SK_U64		Val64RxHwErrs = 0;
-	SK_U64		Val64TxHwErrs = 0;
-	SK_BOOL		Is64BitReq = SK_FALSE;
-	char		Buf[256];
-	int			MacType;
-
-	/*
-	 * Check instance. We only handle single instance variables.
-	 */
-	if (Instance != (SK_U32)(-1) && Instance != 1) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_INST);
-	}
-
-	/*
-	 * Check action. We only allow get requests.
-	 */
-	if (Action != SK_PNMI_GET) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_READ_ONLY);
-	}
-	
-	MacType = pAC->GIni.GIMacType;
-	
-	/*
-	 * Check length for the various supported OIDs
-	 */
-	switch (Id) {
-
-	case OID_GEN_XMIT_ERROR:
-	case OID_GEN_RCV_ERROR:
-	case OID_GEN_RCV_NO_BUFFER:
-#ifndef SK_NDIS_64BIT_CTR
-		if (*pLen < sizeof(SK_U32)) {
-			*pLen = sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-
-#else /* SK_NDIS_64BIT_CTR */
-
-		/*
-		 * for compatibility, at least 32bit are required for oid
-		 */
-		if (*pLen < sizeof(SK_U32)) {
-			/*
-			* but indicate handling for 64bit values,
-			* if insufficient space is provided
-			*/
-			*pLen = sizeof(SK_U64);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-
-		Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE;
-#endif /* SK_NDIS_64BIT_CTR */
-		break;
-
-	case OID_SKGE_PORT_NUMBER:
-	case OID_SKGE_DEVICE_TYPE:
-	case OID_SKGE_RESULT:
-	case OID_SKGE_RLMT_MONITOR_NUMBER:
-	case OID_GEN_TRANSMIT_QUEUE_LENGTH:
-	case OID_SKGE_TRAP_NUMBER:
-	case OID_SKGE_MDB_VERSION:
-	case OID_SKGE_BOARDLEVEL:
-	case OID_SKGE_CHIPID:
-	case OID_SKGE_RAMSIZE:
-		if (*pLen < sizeof(SK_U32)) {
-
-			*pLen = sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	case OID_SKGE_CHIPSET:
-		if (*pLen < sizeof(SK_U16)) {
-
-			*pLen = sizeof(SK_U16);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	case OID_SKGE_BUS_TYPE:
-	case OID_SKGE_BUS_SPEED:
-	case OID_SKGE_BUS_WIDTH:
-	case OID_SKGE_SENSOR_NUMBER:
-	case OID_SKGE_CHKSM_NUMBER:
-	case OID_SKGE_VAUXAVAIL:
-		if (*pLen < sizeof(SK_U8)) {
-
-			*pLen = sizeof(SK_U8);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	case OID_SKGE_TX_SW_QUEUE_LEN:
-	case OID_SKGE_TX_SW_QUEUE_MAX:
-	case OID_SKGE_TX_RETRY:
-	case OID_SKGE_RX_INTR_CTS:
-	case OID_SKGE_TX_INTR_CTS:
-	case OID_SKGE_RX_NO_BUF_CTS:
-	case OID_SKGE_TX_NO_BUF_CTS:
-	case OID_SKGE_TX_USED_DESCR_NO:
-	case OID_SKGE_RX_DELIVERED_CTS:
-	case OID_SKGE_RX_OCTETS_DELIV_CTS:
-	case OID_SKGE_RX_HW_ERROR_CTS:
-	case OID_SKGE_TX_HW_ERROR_CTS:
-	case OID_SKGE_IN_ERRORS_CTS:
-	case OID_SKGE_OUT_ERROR_CTS:
-	case OID_SKGE_ERR_RECOVERY_CTS:
-	case OID_SKGE_SYSUPTIME:
-		if (*pLen < sizeof(SK_U64)) {
-
-			*pLen = sizeof(SK_U64);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	default:
-		/* Checked later */
-		break;
-	}
-
-	/* Update statistic */
-	if (Id == OID_SKGE_RX_HW_ERROR_CTS ||
-		Id == OID_SKGE_TX_HW_ERROR_CTS ||
-		Id == OID_SKGE_IN_ERRORS_CTS ||
-		Id == OID_SKGE_OUT_ERROR_CTS ||
-		Id == OID_GEN_XMIT_ERROR ||
-		Id == OID_GEN_RCV_ERROR) {
-
-		/* Force the XMAC to update its statistic counters and
-		 * Increment semaphore to indicate that an update was
-		 * already done.
-		 */
-		Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1);
-		if (Ret != SK_PNMI_ERR_OK) {
-
-			*pLen = 0;
-			return (Ret);
-		}
-		pAC->Pnmi.MacUpdatedFlag ++;
-
-		/*
-		 * Some OIDs consist of multiple hardware counters. Those
-		 * values which are contained in all of them will be added
-		 * now.
-		 */
-		switch (Id) {
-
-		case OID_SKGE_RX_HW_ERROR_CTS:
-		case OID_SKGE_IN_ERRORS_CTS:
-		case OID_GEN_RCV_ERROR:
-			Val64RxHwErrs =
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_MISSED, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FRAMING, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_OVERFLOW, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_JABBER, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CARRIER, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_IRLENGTH, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SYMBOL, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SHORTS, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_RUNT, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex);
-	        break;
-
-		case OID_SKGE_TX_HW_ERROR_CTS:
-		case OID_SKGE_OUT_ERROR_CTS:
-		case OID_GEN_XMIT_ERROR:
-			Val64TxHwErrs =
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_EXCESS_COL, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_LATE_COL, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_UNDERRUN, NetIndex) +
-				GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_CARRIER, NetIndex);
-			break;
-		}
-	}
-
-	/*
-	 * Retrieve value
-	 */
-	switch (Id) {
-
-	case OID_SKGE_SUPPORTED_LIST:
-		Len = ID_TABLE_SIZE * sizeof(SK_U32);
-		if (*pLen < Len) {
-
-			*pLen = Len;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		for (Offset = 0, Index = 0; Offset < Len;
-			Offset += sizeof(SK_U32), Index ++) {
-
-			Val32 = (SK_U32)IdTable[Index].Id;
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-		}
-		*pLen = Len;
-		break;
-
-	case OID_SKGE_BOARDLEVEL:
-		Val32 = (SK_U32)pAC->GIni.GILevel;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_PORT_NUMBER:
-		Val32 = (SK_U32)pAC->GIni.GIMacsFound;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_DEVICE_TYPE:
-		Val32 = (SK_U32)pAC->Pnmi.DeviceType;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_DRIVER_DESCR:
-		if (pAC->Pnmi.pDriverDescription == NULL) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR007,
-				SK_PNMI_ERR007MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		Len = SK_STRLEN(pAC->Pnmi.pDriverDescription) + 1;
-		if (Len > SK_PNMI_STRINGLEN1) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR029,
-				SK_PNMI_ERR029MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		if (*pLen < Len) {
-
-			*pLen = Len;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		*pBuf = (char)(Len - 1);
-		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverDescription, Len - 1);
-		*pLen = Len;
-		break;
-
-	case OID_SKGE_DRIVER_VERSION:
-		if (pAC->Pnmi.pDriverVersion == NULL) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030,
-				SK_PNMI_ERR030MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		Len = SK_STRLEN(pAC->Pnmi.pDriverVersion) + 1;
-		if (Len > SK_PNMI_STRINGLEN1) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031,
-				SK_PNMI_ERR031MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		if (*pLen < Len) {
-
-			*pLen = Len;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		*pBuf = (char)(Len - 1);
-		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverVersion, Len - 1);
-		*pLen = Len;
-		break;
-
-	case OID_SKGE_DRIVER_RELDATE:
-		if (pAC->Pnmi.pDriverReleaseDate == NULL) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030,
-				SK_PNMI_ERR053MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		Len = SK_STRLEN(pAC->Pnmi.pDriverReleaseDate) + 1;
-		if (Len > SK_PNMI_STRINGLEN1) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031,
-				SK_PNMI_ERR054MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		if (*pLen < Len) {
-
-			*pLen = Len;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		*pBuf = (char)(Len - 1);
-		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverReleaseDate, Len - 1);
-		*pLen = Len;
-		break;
-
-	case OID_SKGE_DRIVER_FILENAME:
-		if (pAC->Pnmi.pDriverFileName == NULL) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030,
-				SK_PNMI_ERR055MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		Len = SK_STRLEN(pAC->Pnmi.pDriverFileName) + 1;
-		if (Len > SK_PNMI_STRINGLEN1) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031,
-				SK_PNMI_ERR056MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		if (*pLen < Len) {
-
-			*pLen = Len;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		*pBuf = (char)(Len - 1);
-		SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverFileName, Len - 1);
-		*pLen = Len;
-		break;
-
-	case OID_SKGE_HW_DESCR:
-		/*
-		 * The hardware description is located in the VPD. This
-		 * query may move to the initialisation routine. But
-		 * the VPD data is cached and therefore a call here
-		 * will not make much difference.
-		 */
-		Len = 256;
-		if (VpdRead(pAC, IoC, VPD_NAME, Buf, (int *)&Len) > 0) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR032,
-				SK_PNMI_ERR032MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-		Len ++;
-		if (Len > SK_PNMI_STRINGLEN1) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR033,
-				SK_PNMI_ERR033MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-		if (*pLen < Len) {
-
-			*pLen = Len;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		*pBuf = (char)(Len - 1);
-		SK_MEMCPY(pBuf + 1, Buf, Len - 1);
-		*pLen = Len;
-		break;
-
-	case OID_SKGE_HW_VERSION:
-		/* Oh, I love to do some string manipulation */
-		if (*pLen < 5) {
-
-			*pLen = 5;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		Val8 = (SK_U8)pAC->GIni.GIPciHwRev;
-		pBuf[0] = 4;
-		pBuf[1] = 'v';
-		pBuf[2] = (char)(0x30 | ((Val8 >> 4) & 0x0F));
-		pBuf[3] = '.';
-		pBuf[4] = (char)(0x30 | (Val8 & 0x0F));
-		*pLen = 5;
-		break;
-
-	case OID_SKGE_CHIPSET:
-		Val16 = pAC->Pnmi.Chipset;
-		SK_PNMI_STORE_U16(pBuf, Val16);
-		*pLen = sizeof(SK_U16);
-		break;
-
-	case OID_SKGE_CHIPID:
-		Val32 = pAC->GIni.GIChipId;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_RAMSIZE:
-		Val32 = pAC->GIni.GIRamSize;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_VAUXAVAIL:
-		*pBuf = (char) pAC->GIni.GIVauxAvail;
-		*pLen = sizeof(char);
-		break;
-
-	case OID_SKGE_BUS_TYPE:
-		*pBuf = (char) SK_PNMI_BUS_PCI;
-		*pLen = sizeof(char);
-		break;
-
-	case OID_SKGE_BUS_SPEED:
-		*pBuf = pAC->Pnmi.PciBusSpeed;
-		*pLen = sizeof(char);
-		break;
-
-	case OID_SKGE_BUS_WIDTH:
-		*pBuf = pAC->Pnmi.PciBusWidth;
-		*pLen = sizeof(char);
-		break;
-
-	case OID_SKGE_RESULT:
-		Val32 = pAC->Pnmi.TestResult;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_SENSOR_NUMBER:
-		*pBuf = (char)pAC->I2c.MaxSens;
-		*pLen = sizeof(char);
-		break;
-
-	case OID_SKGE_CHKSM_NUMBER:
-		*pBuf = SKCS_NUM_PROTOCOLS;
-		*pLen = sizeof(char);
-		break;
-
-	case OID_SKGE_TRAP_NUMBER:
-		GetTrapQueueLen(pAC, &Len, &Val);
-		Val32 = (SK_U32)Val;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_TRAP:
-		GetTrapQueueLen(pAC, &Len, &Val);
-		if (*pLen < Len) {
-
-			*pLen = Len;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		CopyTrapQueue(pAC, pBuf);
-		*pLen = Len;
-		break;
-
-	case OID_SKGE_RLMT_MONITOR_NUMBER:
-/* XXX Not yet implemented by RLMT therefore we return zero elements */
-		Val32 = 0;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_SKGE_TX_SW_QUEUE_LEN:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueLen;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen +
-					pAC->Pnmi.BufPort[1].TxSwQueueLen;
-			}			
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueLen;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].TxSwQueueLen +
-					pAC->Pnmi.Port[1].TxSwQueueLen;
-			}			
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-
-	case OID_SKGE_TX_SW_QUEUE_MAX:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueMax;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].TxSwQueueMax +
-					pAC->Pnmi.BufPort[1].TxSwQueueMax;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueMax;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].TxSwQueueMax +
-					pAC->Pnmi.Port[1].TxSwQueueMax;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_TX_RETRY:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].TxRetryCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].TxRetryCts +
-					pAC->Pnmi.BufPort[1].TxRetryCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].TxRetryCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].TxRetryCts +
-					pAC->Pnmi.Port[1].TxRetryCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_RX_INTR_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].RxIntrCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].RxIntrCts +
-					pAC->Pnmi.BufPort[1].RxIntrCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].RxIntrCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].RxIntrCts +
-					pAC->Pnmi.Port[1].RxIntrCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_TX_INTR_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].TxIntrCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].TxIntrCts +
-					pAC->Pnmi.BufPort[1].TxIntrCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].TxIntrCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].TxIntrCts +
-					pAC->Pnmi.Port[1].TxIntrCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_RX_NO_BUF_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].RxNoBufCts +
-					pAC->Pnmi.BufPort[1].RxNoBufCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].RxNoBufCts +
-					pAC->Pnmi.Port[1].RxNoBufCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_TX_NO_BUF_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].TxNoBufCts +
-					pAC->Pnmi.BufPort[1].TxNoBufCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].TxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].TxNoBufCts +
-					pAC->Pnmi.Port[1].TxNoBufCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_TX_USED_DESCR_NO:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].TxUsedDescrNo;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].TxUsedDescrNo +
-					pAC->Pnmi.BufPort[1].TxUsedDescrNo;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].TxUsedDescrNo;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].TxUsedDescrNo +
-					pAC->Pnmi.Port[1].TxUsedDescrNo;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_RX_DELIVERED_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].RxDeliveredCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].RxDeliveredCts +
-					pAC->Pnmi.BufPort[1].RxDeliveredCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].RxDeliveredCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].RxDeliveredCts +
-					pAC->Pnmi.Port[1].RxDeliveredCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_RX_OCTETS_DELIV_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].RxOctetsDeliveredCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].RxOctetsDeliveredCts +
-					pAC->Pnmi.BufPort[1].RxOctetsDeliveredCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].RxOctetsDeliveredCts +
-					pAC->Pnmi.Port[1].RxOctetsDeliveredCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_RX_HW_ERROR_CTS:
-		SK_PNMI_STORE_U64(pBuf, Val64RxHwErrs);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_TX_HW_ERROR_CTS:
-		SK_PNMI_STORE_U64(pBuf, Val64TxHwErrs);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_IN_ERRORS_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = Val64RxHwErrs +
-					pAC->Pnmi.BufPort[0].RxNoBufCts +
-					pAC->Pnmi.BufPort[1].RxNoBufCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = Val64RxHwErrs +
-					pAC->Pnmi.Port[0].RxNoBufCts +
-					pAC->Pnmi.Port[1].RxNoBufCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_OUT_ERROR_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = Val64TxHwErrs +
-					pAC->Pnmi.BufPort[0].TxNoBufCts +
-					pAC->Pnmi.BufPort[1].TxNoBufCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = Val64TxHwErrs +
-					pAC->Pnmi.Port[0].TxNoBufCts +
-					pAC->Pnmi.Port[1].TxNoBufCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_ERR_RECOVERY_CTS:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.BufPort[NetIndex].ErrRecoveryCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.BufPort[0].ErrRecoveryCts +
-					pAC->Pnmi.BufPort[1].ErrRecoveryCts;
-			}
-		}
-		else {
-			/* Dual net mode */
-			if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-				Val64 = pAC->Pnmi.Port[NetIndex].ErrRecoveryCts;
-			}
-			/* Single net mode */
-			else {
-				Val64 = pAC->Pnmi.Port[0].ErrRecoveryCts +
-					pAC->Pnmi.Port[1].ErrRecoveryCts;
-			}
-		}
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_SYSUPTIME:
-		Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
-		Val64 -= pAC->Pnmi.StartUpTime;
-		SK_PNMI_STORE_U64(pBuf, Val64);
-		*pLen = sizeof(SK_U64);
-		break;
-
-	case OID_SKGE_MDB_VERSION:
-		Val32 = SK_PNMI_MDB_VERSION;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	case OID_GEN_RCV_ERROR:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
-		}
-		else {
-			Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts;
-		}
-
-		/*
-		 * by default 32bit values are evaluated
-		 */
-		if (!Is64BitReq) {
-			Val32 = (SK_U32)Val64;
-			SK_PNMI_STORE_U32(pBuf, Val32);
-			*pLen = sizeof(SK_U32);
-		}
-		else {
-			SK_PNMI_STORE_U64(pBuf, Val64);
-			*pLen = sizeof(SK_U64);
-		}
-		break;
-
-	case OID_GEN_XMIT_ERROR:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts;
-		}
-		else {
-			Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts;
-		}
-
-		/*
-		 * by default 32bit values are evaluated
-		 */
-		if (!Is64BitReq) {
-			Val32 = (SK_U32)Val64;
-			SK_PNMI_STORE_U32(pBuf, Val32);
-			*pLen = sizeof(SK_U32);
-		}
-		else {
-			SK_PNMI_STORE_U64(pBuf, Val64);
-			*pLen = sizeof(SK_U64);
-		}
-		break;
-
-	case OID_GEN_RCV_NO_BUFFER:
-		/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-		if (MacType == SK_MAC_XMAC) {
-			Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts;
-		}
-		else {
-			Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts;
-		}
-
-		/*
-		 * by default 32bit values are evaluated
-		 */
-		if (!Is64BitReq) {
-			Val32 = (SK_U32)Val64;
-			SK_PNMI_STORE_U32(pBuf, Val32);
-			*pLen = sizeof(SK_U32);
-		}
-		else {
-			SK_PNMI_STORE_U64(pBuf, Val64);
-			*pLen = sizeof(SK_U64);
-		}
-		break;
-
-	case OID_GEN_TRANSMIT_QUEUE_LENGTH:
-		Val32 = (SK_U32)pAC->Pnmi.Port[NetIndex].TxSwQueueLen;
-		SK_PNMI_STORE_U32(pBuf, Val32);
-		*pLen = sizeof(SK_U32);
-		break;
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR034,
-			SK_PNMI_ERR034MSG);
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_GENERAL);
-	}
-
-	if (Id == OID_SKGE_RX_HW_ERROR_CTS ||
-		Id == OID_SKGE_TX_HW_ERROR_CTS ||
-		Id == OID_SKGE_IN_ERRORS_CTS ||
-		Id == OID_SKGE_OUT_ERROR_CTS ||
-		Id == OID_GEN_XMIT_ERROR ||
-		Id == OID_GEN_RCV_ERROR) {
-
-		pAC->Pnmi.MacUpdatedFlag --;
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * Rlmt - OID handler function of OID_SKGE_RLMT_XXX single instance.
- *
- * Description:
- *	Get/Presets/Sets the RLMT OIDs.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int Rlmt(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	int		Ret;
-	unsigned int	PhysPortIndex;
-	unsigned int	PhysPortMax;
-	SK_EVPARA	EventParam;
-	SK_U32		Val32;
-	SK_U64		Val64;
-
-
-	/*
-	 * Check instance. Only single instance OIDs are allowed here.
-	 */
-	if (Instance != (SK_U32)(-1) && Instance != 1) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_INST);
-	}
-
-	/*
-	 * Perform the requested action.
-	 */
-	if (Action == SK_PNMI_GET) {
-
-		/*
-		 * Check if the buffer length is large enough.
-		 */
-
-		switch (Id) {
-
-		case OID_SKGE_RLMT_MODE:
-		case OID_SKGE_RLMT_PORT_ACTIVE:
-		case OID_SKGE_RLMT_PORT_PREFERRED:
-			if (*pLen < sizeof(SK_U8)) {
-
-				*pLen = sizeof(SK_U8);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			break;
-
-		case OID_SKGE_RLMT_PORT_NUMBER:
-			if (*pLen < sizeof(SK_U32)) {
-
-				*pLen = sizeof(SK_U32);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			break;
-
-		case OID_SKGE_RLMT_CHANGE_CTS:
-		case OID_SKGE_RLMT_CHANGE_TIME:
-		case OID_SKGE_RLMT_CHANGE_ESTIM:
-		case OID_SKGE_RLMT_CHANGE_THRES:
-			if (*pLen < sizeof(SK_U64)) {
-
-				*pLen = sizeof(SK_U64);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			break;
-
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR035,
-				SK_PNMI_ERR035MSG);
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		/*
-		 * Update RLMT statistic and increment semaphores to indicate
-		 * that an update was already done. Maybe RLMT will hold its
-		 * statistic always up to date some time. Then we can
-		 * remove this type of call.
-		 */
-		if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
-
-			*pLen = 0;
-			return (Ret);
-		}
-		pAC->Pnmi.RlmtUpdatedFlag ++;
-
-		/*
-		 * Retrieve Value
-		*/
-		switch (Id) {
-
-		case OID_SKGE_RLMT_MODE:
-			*pBuf = (char)pAC->Rlmt.Net[0].RlmtMode;
-			*pLen = sizeof(char);
-			break;
-
-		case OID_SKGE_RLMT_PORT_NUMBER:
-			Val32 = (SK_U32)pAC->GIni.GIMacsFound;
-			SK_PNMI_STORE_U32(pBuf, Val32);
-			*pLen = sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_RLMT_PORT_ACTIVE:
-			*pBuf = 0;
-			/*
-			 * If multiple ports may become active this OID
-			 * doesn't make sense any more. A new variable in
-			 * the port structure should be created. However,
-			 * for this variable the first active port is
-			 * returned.
-			 */
-			PhysPortMax = pAC->GIni.GIMacsFound;
-
-			for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
-				PhysPortIndex ++) {
-
-				if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
-
-					*pBuf = (char)SK_PNMI_PORT_PHYS2LOG(PhysPortIndex);
-					break;
-				}
-			}
-			*pLen = sizeof(char);
-			break;
-
-		case OID_SKGE_RLMT_PORT_PREFERRED:
-			*pBuf = (char)SK_PNMI_PORT_PHYS2LOG(pAC->Rlmt.Net[NetIndex].Preference);
-			*pLen = sizeof(char);
-			break;
-
-		case OID_SKGE_RLMT_CHANGE_CTS:
-			Val64 = pAC->Pnmi.RlmtChangeCts;
-			SK_PNMI_STORE_U64(pBuf, Val64);
-			*pLen = sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_RLMT_CHANGE_TIME:
-			Val64 = pAC->Pnmi.RlmtChangeTime;
-			SK_PNMI_STORE_U64(pBuf, Val64);
-			*pLen = sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_RLMT_CHANGE_ESTIM:
-			Val64 = pAC->Pnmi.RlmtChangeEstimate.Estimate;
-			SK_PNMI_STORE_U64(pBuf, Val64);
-			*pLen = sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_RLMT_CHANGE_THRES:
-			Val64 = pAC->Pnmi.RlmtChangeThreshold;
-			SK_PNMI_STORE_U64(pBuf, Val64);
-			*pLen = sizeof(SK_U64);
-			break;
-
-		default:
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
-				("Rlmt: Unknown OID should be handled before"));
-
-			pAC->Pnmi.RlmtUpdatedFlag --;
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		pAC->Pnmi.RlmtUpdatedFlag --;
-	}
-	else {
-		/* Perform a preset or set */
-		switch (Id) {
-
-		case OID_SKGE_RLMT_MODE:
-			/* Check if the buffer length is plausible */
-			if (*pLen < sizeof(char)) {
-
-				*pLen = sizeof(char);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			/* Check if the value range is correct */
-			if (*pLen != sizeof(char) ||
-				(*pBuf & SK_PNMI_RLMT_MODE_CHK_LINK) == 0 ||
-				*(SK_U8 *)pBuf > 15) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-			/* The preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_OK);
-			}
-			/* Send an event to RLMT to change the mode */
-			SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
-			EventParam.Para32[0] |= (SK_U32)(*pBuf);
-			EventParam.Para32[1] = 0;
-			if (SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE,
-				EventParam) > 0) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR037,
-					SK_PNMI_ERR037MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			break;
-
-		case OID_SKGE_RLMT_PORT_PREFERRED:
-			/* Check if the buffer length is plausible */
-			if (*pLen < sizeof(char)) {
-
-				*pLen = sizeof(char);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			/* Check if the value range is correct */
-			if (*pLen != sizeof(char) || *(SK_U8 *)pBuf >
-				(SK_U8)pAC->GIni.GIMacsFound) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-			/* The preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_OK);
-			}
-
-			/*
-			 * Send an event to RLMT change the preferred port.
-			 * A param of -1 means automatic mode. RLMT will
-			 * make the decision which is the preferred port.
-			 */
-			SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
-			EventParam.Para32[0] = (SK_U32)(*pBuf) - 1;
-			EventParam.Para32[1] = NetIndex;
-			if (SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE,
-				EventParam) > 0) {
-
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR038,
-					SK_PNMI_ERR038MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-			break;
-
-		case OID_SKGE_RLMT_CHANGE_THRES:
-			/* Check if the buffer length is plausible */
-			if (*pLen < sizeof(SK_U64)) {
-
-				*pLen = sizeof(SK_U64);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			/*
-			 * There are not many restrictions to the
-			 * value range.
-			 */
-			if (*pLen != sizeof(SK_U64)) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-			/* A preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_OK);
-			}
-			/*
-			 * Store the new threshold, which will be taken
-			 * on the next timer event.
-			 */
-			SK_PNMI_READ_U64(pBuf, Val64);
-			pAC->Pnmi.RlmtChangeThreshold = Val64;
-			break;
-
-		default:
-			/* The other OIDs are not be able for set */
-			*pLen = 0;
-			return (SK_PNMI_ERR_READ_ONLY);
-		}
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * RlmtStat - OID handler function of OID_SKGE_RLMT_XXX multiple instance.
- *
- * Description:
- *	Performs get requests on multiple instance variables.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int RlmtStat(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	unsigned int	PhysPortMax;
-	unsigned int	PhysPortIndex;
-	unsigned int	Limit;
-	unsigned int	Offset;
-	int		Ret;
-	SK_U32		Val32;
-	SK_U64		Val64;
-
-	/*
-	 * Calculate the port indexes from the instance.
-	 */
-	PhysPortMax = pAC->GIni.GIMacsFound;
-
-	if ((Instance != (SK_U32)(-1))) {
-		/* Check instance range */
-		if ((Instance < 1) || (Instance > PhysPortMax)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-
-		/* Single net mode */
-		PhysPortIndex = Instance - 1;
-
-		/* Dual net mode */
-		if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-			PhysPortIndex = NetIndex;
-		}
-
-		/* Both net modes */
-		Limit = PhysPortIndex + 1;
-	}
-	else {
-		/* Single net mode */
-		PhysPortIndex = 0;
-		Limit = PhysPortMax;
-
-		/* Dual net mode */
-		if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-			PhysPortIndex = NetIndex;
-			Limit = PhysPortIndex + 1;
-		}
-	}
-
-	/*
-	 * Currently only get requests are allowed.
-	 */
-	if (Action != SK_PNMI_GET) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_READ_ONLY);
-	}
-
-	/*
-	 * Check if the buffer length is large enough.
-	 */
-	switch (Id) {
-
-	case OID_SKGE_RLMT_PORT_INDEX:
-	case OID_SKGE_RLMT_STATUS:
-		if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) {
-
-			*pLen = (Limit - PhysPortIndex) * sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	case OID_SKGE_RLMT_TX_HELLO_CTS:
-	case OID_SKGE_RLMT_RX_HELLO_CTS:
-	case OID_SKGE_RLMT_TX_SP_REQ_CTS:
-	case OID_SKGE_RLMT_RX_SP_CTS:
-		if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U64)) {
-
-			*pLen = (Limit - PhysPortIndex) * sizeof(SK_U64);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR039,
-			SK_PNMI_ERR039MSG);
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_GENERAL);
-
-	}
-
-	/*
-	 * Update statistic and increment semaphores to indicate that
-	 * an update was already done.
-	 */
-	if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) {
-
-		*pLen = 0;
-		return (Ret);
-	}
-	pAC->Pnmi.RlmtUpdatedFlag ++;
-
-	/*
-	 * Get value
-	 */
-	Offset = 0;
-	for (; PhysPortIndex < Limit; PhysPortIndex ++) {
-
-		switch (Id) {
-
-		case OID_SKGE_RLMT_PORT_INDEX:
-			Val32 = PhysPortIndex;
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-			Offset += sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_RLMT_STATUS:
-			if (pAC->Rlmt.Port[PhysPortIndex].PortState ==
-				SK_RLMT_PS_INIT ||
-				pAC->Rlmt.Port[PhysPortIndex].PortState ==
-				SK_RLMT_PS_DOWN) {
-
-				Val32 = SK_PNMI_RLMT_STATUS_ERROR;
-			}
-			else if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
-
-				Val32 = SK_PNMI_RLMT_STATUS_ACTIVE;
-			}
-			else {
-				Val32 = SK_PNMI_RLMT_STATUS_STANDBY;
-			}
-			SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-			Offset += sizeof(SK_U32);
-			break;
-
-		case OID_SKGE_RLMT_TX_HELLO_CTS:
-			Val64 = pAC->Rlmt.Port[PhysPortIndex].TxHelloCts;
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_RLMT_RX_HELLO_CTS:
-			Val64 = pAC->Rlmt.Port[PhysPortIndex].RxHelloCts;
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_RLMT_TX_SP_REQ_CTS:
-			Val64 = pAC->Rlmt.Port[PhysPortIndex].TxSpHelloReqCts;
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		case OID_SKGE_RLMT_RX_SP_CTS:
-			Val64 = pAC->Rlmt.Port[PhysPortIndex].RxSpHelloCts;
-			SK_PNMI_STORE_U64(pBuf + Offset, Val64);
-			Offset += sizeof(SK_U64);
-			break;
-
-		default:
-			SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
-				("RlmtStat: Unknown OID should be errored before"));
-
-			pAC->Pnmi.RlmtUpdatedFlag --;
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-	}
-	*pLen = Offset;
-
-	pAC->Pnmi.RlmtUpdatedFlag --;
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * MacPrivateConf - OID handler function of OIDs concerning the configuration
- *
- * Description:
- *	Get/Presets/Sets the OIDs concerning the configuration.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int MacPrivateConf(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	unsigned int	PhysPortMax;
-	unsigned int	PhysPortIndex;
-	unsigned int	LogPortMax;
-	unsigned int	LogPortIndex;
-	unsigned int	Limit;
-	unsigned int	Offset;
-	char		Val8;
-	char 		*pBufPtr;
-	int			Ret;
-	SK_EVPARA	EventParam;
-	SK_U32		Val32;
-
-	/*
-	 * Calculate instance if wished. MAC index 0 is the virtual MAC.
-	 */
-	PhysPortMax = pAC->GIni.GIMacsFound;
-	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
-
-	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */
-		LogPortMax--;
-	}
-
-	if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */
-		/* Check instance range */
-		if ((Instance < 1) || (Instance > LogPortMax)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-		LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance);
-		Limit = LogPortIndex + 1;
-	}
-
-	else { /* Instance == (SK_U32)(-1), get all Instances of that OID */
-
-		LogPortIndex = 0;
-		Limit = LogPortMax;
-	}
-
-	/*
-	 * Perform action
-	 */
-	if (Action == SK_PNMI_GET) {
-
-		/* Check length */
-		switch (Id) {
-
-		case OID_SKGE_PMD:
-		case OID_SKGE_CONNECTOR:
-		case OID_SKGE_LINK_CAP:
-		case OID_SKGE_LINK_MODE:
-		case OID_SKGE_LINK_MODE_STATUS:
-		case OID_SKGE_LINK_STATUS:
-		case OID_SKGE_FLOWCTRL_CAP:
-		case OID_SKGE_FLOWCTRL_MODE:
-		case OID_SKGE_FLOWCTRL_STATUS:
-		case OID_SKGE_PHY_OPERATION_CAP:
-		case OID_SKGE_PHY_OPERATION_MODE:
-		case OID_SKGE_PHY_OPERATION_STATUS:
-		case OID_SKGE_SPEED_CAP:
-		case OID_SKGE_SPEED_MODE:
-		case OID_SKGE_SPEED_STATUS:
-			if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) {
-
-				*pLen = (Limit - LogPortIndex) * sizeof(SK_U8);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			break;
-
-        case OID_SKGE_MTU:
-        case OID_SKGE_PHY_TYPE:
-			if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U32)) {
-
-				*pLen = (Limit - LogPortIndex) * sizeof(SK_U32);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			break;
-
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR041,
-				SK_PNMI_ERR041MSG);
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		/*
-		 * Update statistic and increment semaphore to indicate
-		 * that an update was already done.
-		 */
-		if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) {
-
-			*pLen = 0;
-			return (Ret);
-		}
-		pAC->Pnmi.SirqUpdatedFlag ++;
-
-		/*
-		 * Get value
-		 */
-		Offset = 0;
-		for (; LogPortIndex < Limit; LogPortIndex ++) {
-
-			pBufPtr = pBuf + Offset;
-			
-			switch (Id) {
-
-			case OID_SKGE_PMD:
-				*pBufPtr = pAC->Pnmi.PMD;
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_CONNECTOR:
-				*pBufPtr = pAC->Pnmi.Connector;
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_PHY_TYPE:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						continue;
-					}
-					else {
-						/* Get value for physical ports */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-						Val32 = pAC->GIni.GP[PhysPortIndex].PhyType;
-						SK_PNMI_STORE_U32(pBufPtr, Val32);
-					}
-				}
-				else { /* DualNetMode */
-					
-					Val32 = pAC->GIni.GP[NetIndex].PhyType;
-					SK_PNMI_STORE_U32(pBufPtr, Val32);
-				}
-				Offset += sizeof(SK_U32);
-				break;
-
-			case OID_SKGE_LINK_CAP:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical ports */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkCap;
-					}
-				}
-				else { /* DualNetMode */
-					
-					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkCap;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_LINK_MODE:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical ports */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkModeConf;
-					}
-				}
-				else { /* DualNetMode */
-				
-					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkModeConf;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_LINK_MODE_STATUS:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical port */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-
-						*pBufPtr =
-							CalculateLinkModeStatus(pAC, IoC, PhysPortIndex);
-					}
-				}
-				else { /* DualNetMode */
-					
-					*pBufPtr = CalculateLinkModeStatus(pAC, IoC, NetIndex);
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_LINK_STATUS:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical ports */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = CalculateLinkStatus(pAC, IoC, PhysPortIndex);
-					}
-				}
-				else { /* DualNetMode */
-
-					*pBufPtr = CalculateLinkStatus(pAC, IoC, NetIndex);
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_FLOWCTRL_CAP:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical ports */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap;
-					}
-				}
-				else { /* DualNetMode */
-				
-					*pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlCap;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_FLOWCTRL_MODE:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical port */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode;
-					}
-				}
-				else { /* DualNetMode */
-
-					*pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlMode;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_FLOWCTRL_STATUS:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical port */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus;
-					}
-				}
-				else { /* DualNetMode */
-
-					*pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlStatus;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_PHY_OPERATION_CAP:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical ports */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSCap;
-					}
-				}
-				else { /* DualNetMode */
-				
-					*pBufPtr = pAC->GIni.GP[NetIndex].PMSCap;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_PHY_OPERATION_MODE:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical port */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSMode;
-					}
-				}
-				else { /* DualNetMode */
-				
-					*pBufPtr = pAC->GIni.GP[NetIndex].PMSMode;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_PHY_OPERATION_STATUS:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical port */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSStatus;
-					}
-				}
-				else {
-				
-					*pBufPtr = pAC->GIni.GP[NetIndex].PMSStatus;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_SPEED_CAP:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical ports */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedCap;
-					}
-				}
-				else { /* DualNetMode */
-				
-					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedCap;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_SPEED_MODE:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical port */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeed;
-					}
-				}
-				else { /* DualNetMode */
-
-					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeed;
-				}
-				Offset += sizeof(char);
-				break;
-
-			case OID_SKGE_SPEED_STATUS:
-				if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */
-					if (LogPortIndex == 0) {
-						/* Get value for virtual port */
-						VirtualConf(pAC, IoC, Id, pBufPtr);
-					}
-					else {
-						/* Get value for physical port */
-						PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(
-							pAC, LogPortIndex);
-	
-						*pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed;
-					}
-				}
-				else { /* DualNetMode */
-
-					*pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedUsed;
-				}
-				Offset += sizeof(char);
-				break;
-			
-			case OID_SKGE_MTU:
-				Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex);
-				SK_PNMI_STORE_U32(pBufPtr, Val32);
-				Offset += sizeof(SK_U32);
-				break;
-
-			default:
-				SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
-					("MacPrivateConf: Unknown OID should be handled before"));
-
-				pAC->Pnmi.SirqUpdatedFlag --;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-		}
-		*pLen = Offset;
-		pAC->Pnmi.SirqUpdatedFlag --;
-
-		return (SK_PNMI_ERR_OK);
-	}
-
-	/*
-	 * From here SET or PRESET action. Check if the passed
-	 * buffer length is plausible.
-	 */
-	switch (Id) {
-
-	case OID_SKGE_LINK_MODE:
-	case OID_SKGE_FLOWCTRL_MODE:
-	case OID_SKGE_PHY_OPERATION_MODE:
-	case OID_SKGE_SPEED_MODE:
-		if (*pLen < Limit - LogPortIndex) {
-
-			*pLen = Limit - LogPortIndex;
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		if (*pLen != Limit - LogPortIndex) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_BAD_VALUE);
-		}
-		break;
-
-	case OID_SKGE_MTU:
-		if (*pLen < sizeof(SK_U32)) {
-
-			*pLen = sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		if (*pLen != sizeof(SK_U32)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_BAD_VALUE);
-		}
-		break;
-
-    default:
-		*pLen = 0;
-		return (SK_PNMI_ERR_READ_ONLY);
-	}
-
-	/*
-	 * Perform preset or set
-	 */
-	Offset = 0;
-	for (; LogPortIndex < Limit; LogPortIndex ++) {
-
-		switch (Id) {
-
-		case OID_SKGE_LINK_MODE:
-			/* Check the value range */
-			Val8 = *(pBuf + Offset);
-			if (Val8 == 0) {
-
-				Offset += sizeof(char);
-				break;
-			}
-			if (Val8 < SK_LMODE_HALF ||
-				(LogPortIndex != 0 && Val8 > SK_LMODE_AUTOSENSE) ||
-				(LogPortIndex == 0 && Val8 > SK_LMODE_INDETERMINATED)) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-
-			/* The preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				return (SK_PNMI_ERR_OK);
-			}
-
-			if (LogPortIndex == 0) {
-
-				/*
-				 * The virtual port consists of all currently
-				 * active ports. Find them and send an event
-				 * with the new link mode to SIRQ.
-				 */
-				for (PhysPortIndex = 0;
-					PhysPortIndex < PhysPortMax;
-					PhysPortIndex ++) {
-
-					if (!pAC->Pnmi.Port[PhysPortIndex].
-						ActiveFlag) {
-
-						continue;
-					}
-
-					EventParam.Para32[0] = PhysPortIndex;
-					EventParam.Para32[1] = (SK_U32)Val8;
-					if (SkGeSirqEvent(pAC, IoC,
-						SK_HWEV_SET_LMODE,
-						EventParam) > 0) {
-
-						SK_ERR_LOG(pAC, SK_ERRCL_SW,
-							SK_PNMI_ERR043,
-							SK_PNMI_ERR043MSG);
-
-						*pLen = 0;
-						return (SK_PNMI_ERR_GENERAL);
-					}
-				}
-			}
-			else {
-				/*
-				 * Send an event with the new link mode to
-				 * the SIRQ module.
-				 */
-				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
-					pAC, LogPortIndex);
-				EventParam.Para32[1] = (SK_U32)Val8;
-				if (SkGeSirqEvent(pAC, IoC, SK_HWEV_SET_LMODE,
-					EventParam) > 0) {
-
-					SK_ERR_LOG(pAC, SK_ERRCL_SW,
-						SK_PNMI_ERR043,
-						SK_PNMI_ERR043MSG);
-
-					*pLen = 0;
-					return (SK_PNMI_ERR_GENERAL);
-				}
-			}
-			Offset += sizeof(char);
-			break;
-
-		case OID_SKGE_FLOWCTRL_MODE:
-			/* Check the value range */
-			Val8 = *(pBuf + Offset);
-			if (Val8 == 0) {
-
-				Offset += sizeof(char);
-				break;
-			}
-			if (Val8 < SK_FLOW_MODE_NONE ||
-				(LogPortIndex != 0 && Val8 > SK_FLOW_MODE_SYM_OR_REM) ||
-				(LogPortIndex == 0 && Val8 > SK_FLOW_MODE_INDETERMINATED)) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-
-			/* The preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				return (SK_PNMI_ERR_OK);
-			}
-
-			if (LogPortIndex == 0) {
-
-				/*
-				 * The virtual port consists of all currently
-				 * active ports. Find them and send an event
-				 * with the new flow control mode to SIRQ.
-				 */
-				for (PhysPortIndex = 0;
-					PhysPortIndex < PhysPortMax;
-					PhysPortIndex ++) {
-
-					if (!pAC->Pnmi.Port[PhysPortIndex].
-						ActiveFlag) {
-
-						continue;
-					}
-
-					EventParam.Para32[0] = PhysPortIndex;
-					EventParam.Para32[1] = (SK_U32)Val8;
-					if (SkGeSirqEvent(pAC, IoC,
-						SK_HWEV_SET_FLOWMODE,
-						EventParam) > 0) {
-
-						SK_ERR_LOG(pAC, SK_ERRCL_SW,
-							SK_PNMI_ERR044,
-							SK_PNMI_ERR044MSG);
-
-						*pLen = 0;
-						return (SK_PNMI_ERR_GENERAL);
-					}
-				}
-			}
-			else {
-				/*
-				 * Send an event with the new flow control
-				 * mode to the SIRQ module.
-				 */
-				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
-					pAC, LogPortIndex);
-				EventParam.Para32[1] = (SK_U32)Val8;
-				if (SkGeSirqEvent(pAC, IoC,
-					SK_HWEV_SET_FLOWMODE, EventParam)
-					> 0) {
-
-					SK_ERR_LOG(pAC, SK_ERRCL_SW,
-						SK_PNMI_ERR044,
-						SK_PNMI_ERR044MSG);
-
-					*pLen = 0;
-					return (SK_PNMI_ERR_GENERAL);
-				}
-			}
-			Offset += sizeof(char);
-			break;
-
-		case OID_SKGE_PHY_OPERATION_MODE :
-			/* Check the value range */
-			Val8 = *(pBuf + Offset);
-			if (Val8 == 0) {
-				/* mode of this port remains unchanged */
-				Offset += sizeof(char);
-				break;
-			}
-			if (Val8 < SK_MS_MODE_AUTO ||
-				(LogPortIndex != 0 && Val8 > SK_MS_MODE_SLAVE) ||
-				(LogPortIndex == 0 && Val8 > SK_MS_MODE_INDETERMINATED)) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-
-			/* The preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				return (SK_PNMI_ERR_OK);
-			}
-
-			if (LogPortIndex == 0) {
-
-				/*
-				 * The virtual port consists of all currently
-				 * active ports. Find them and send an event
-				 * with new master/slave (role) mode to SIRQ.
-				 */
-				for (PhysPortIndex = 0;
-					PhysPortIndex < PhysPortMax;
-					PhysPortIndex ++) {
-
-					if (!pAC->Pnmi.Port[PhysPortIndex].
-						ActiveFlag) {
-
-						continue;
-					}
-
-					EventParam.Para32[0] = PhysPortIndex;
-					EventParam.Para32[1] = (SK_U32)Val8;
-					if (SkGeSirqEvent(pAC, IoC,
-						SK_HWEV_SET_ROLE,
-						EventParam) > 0) {
-
-						SK_ERR_LOG(pAC, SK_ERRCL_SW,
-							SK_PNMI_ERR042,
-							SK_PNMI_ERR042MSG);
-
-						*pLen = 0;
-						return (SK_PNMI_ERR_GENERAL);
-					}
-				}
-			}
-			else {
-				/*
-				 * Send an event with the new master/slave
-				 * (role) mode to the SIRQ module.
-				 */
-				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
-					pAC, LogPortIndex);
-				EventParam.Para32[1] = (SK_U32)Val8;
-				if (SkGeSirqEvent(pAC, IoC,
-					SK_HWEV_SET_ROLE, EventParam) > 0) {
-
-					SK_ERR_LOG(pAC, SK_ERRCL_SW,
-						SK_PNMI_ERR042,
-						SK_PNMI_ERR042MSG);
-
-					*pLen = 0;
-					return (SK_PNMI_ERR_GENERAL);
-				}
-			}
-
-			Offset += sizeof(char);
-			break;
-
-		case OID_SKGE_SPEED_MODE:
-			/* Check the value range */
-			Val8 = *(pBuf + Offset);
-			if (Val8 == 0) {
-
-				Offset += sizeof(char);
-				break;
-			}
-			if (Val8 < (SK_LSPEED_AUTO) ||
-				(LogPortIndex != 0 && Val8 > (SK_LSPEED_1000MBPS)) ||
-				(LogPortIndex == 0 && Val8 > (SK_LSPEED_INDETERMINATED))) {
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-
-			/* The preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-
-				return (SK_PNMI_ERR_OK);
-			}
-
-			if (LogPortIndex == 0) {
-
-				/*
-				 * The virtual port consists of all currently
-				 * active ports. Find them and send an event
-				 * with the new flow control mode to SIRQ.
-				 */
-				for (PhysPortIndex = 0;
-					PhysPortIndex < PhysPortMax;
-					PhysPortIndex ++) {
-
-					if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
-
-						continue;
-					}
-
-					EventParam.Para32[0] = PhysPortIndex;
-					EventParam.Para32[1] = (SK_U32)Val8;
-					if (SkGeSirqEvent(pAC, IoC,
-						SK_HWEV_SET_SPEED,
-						EventParam) > 0) {
-
-						SK_ERR_LOG(pAC, SK_ERRCL_SW,
-							SK_PNMI_ERR045,
-							SK_PNMI_ERR045MSG);
-
-						*pLen = 0;
-						return (SK_PNMI_ERR_GENERAL);
-					}
-				}
-			}
-			else {
-				/*
-				 * Send an event with the new flow control
-				 * mode to the SIRQ module.
-				 */
-				EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS(
-					pAC, LogPortIndex);
-				EventParam.Para32[1] = (SK_U32)Val8;
-				if (SkGeSirqEvent(pAC, IoC,
-					SK_HWEV_SET_SPEED,
-					EventParam) > 0) {
-
-					SK_ERR_LOG(pAC, SK_ERRCL_SW,
-						SK_PNMI_ERR045,
-						SK_PNMI_ERR045MSG);
-
-					*pLen = 0;
-					return (SK_PNMI_ERR_GENERAL);
-				}
-			}
-			Offset += sizeof(char);
-			break;
-
-		case OID_SKGE_MTU :
-			/* Check the value range */
-			Val32 = *(SK_U32*)(pBuf + Offset);
-			if (Val32 == 0) {
-				/* mtu of this port remains unchanged */
-				Offset += sizeof(SK_U32);
-				break;
-			}
-			if (SK_DRIVER_PRESET_MTU(pAC, IoC, NetIndex, Val32) != 0) {
-				*pLen = 0;
-				return (SK_PNMI_ERR_BAD_VALUE);
-			}
-
-			/* The preset ends here */
-			if (Action == SK_PNMI_PRESET) {
-				return (SK_PNMI_ERR_OK);
-			}
-
-			if (SK_DRIVER_SET_MTU(pAC, IoC, NetIndex, Val32) != 0) {
-				return (SK_PNMI_ERR_GENERAL);
-			}
-
-			Offset += sizeof(SK_U32);
-			break;
-		
-		default:
-            SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR,
-                ("MacPrivateConf: Unknown OID should be handled before set"));
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * Monitor - OID handler function for RLMT_MONITOR_XXX
- *
- * Description:
- *	Because RLMT currently does not support the monitoring of
- *	remote adapter cards, we return always an empty table.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_BAD_VALUE    The passed value is not in the valid
- *	                         value range.
- *	SK_PNMI_ERR_READ_ONLY    The OID is read-only and cannot be set.
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-PNMI_STATIC int Monitor(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	unsigned int	Index;
-	unsigned int	Limit;
-	unsigned int	Offset;
-	unsigned int	Entries;
-
-	
-	/*
-	 * Calculate instance if wished.
-	 */
-	/* XXX Not yet implemented. Return always an empty table. */
-	Entries = 0;
-
-	if ((Instance != (SK_U32)(-1))) {
-
-		if ((Instance < 1) || (Instance > Entries)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-
-		Index = (unsigned int)Instance - 1;
-		Limit = (unsigned int)Instance;
-	}
-	else {
-		Index = 0;
-		Limit = Entries;
-	}
-
-	/*
-	 * Get/Set value
-	*/
-	if (Action == SK_PNMI_GET) {
-
-		for (Offset=0; Index < Limit; Index ++) {
-
-			switch (Id) {
-
-			case OID_SKGE_RLMT_MONITOR_INDEX:
-			case OID_SKGE_RLMT_MONITOR_ADDR:
-			case OID_SKGE_RLMT_MONITOR_ERRS:
-			case OID_SKGE_RLMT_MONITOR_TIMESTAMP:
-			case OID_SKGE_RLMT_MONITOR_ADMIN:
-				break;
-
-			default:
-				SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR046,
-					SK_PNMI_ERR046MSG);
-
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-		}
-		*pLen = Offset;
-	}
-	else {
-		/* Only MONITOR_ADMIN can be set */
-		if (Id != OID_SKGE_RLMT_MONITOR_ADMIN) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_READ_ONLY);
-		}
-
-		/* Check if the length is plausible */
-		if (*pLen < (Limit - Index)) {
-
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		/* Okay, we have a wide value range */
-		if (*pLen != (Limit - Index)) {
-
-			*pLen = 0;
-			return (SK_PNMI_ERR_BAD_VALUE);
-		}
-/*
-		for (Offset=0; Index < Limit; Index ++) {
-		}
-*/
-/*
- * XXX Not yet implemented. Return always BAD_VALUE, because the table
- * is empty.
- */
-		*pLen = 0;
-		return (SK_PNMI_ERR_BAD_VALUE);
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * VirtualConf - Calculates the values of configuration OIDs for virtual port
- *
- * Description:
- *	We handle here the get of the configuration group OIDs, which are
- *	a little bit complicated. The virtual port consists of all currently
- *	active physical ports. If multiple ports are active and configured
- *	differently we get in some trouble to return a single value. So we
- *	get the value of the first active port and compare it with that of
- *	the other active ports. If they are not the same, we return a value
- *	that indicates that the state is indeterminated.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void VirtualConf(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf)		/* Buffer used for the management data transfer */
-{
-	unsigned int	PhysPortMax;
-	unsigned int	PhysPortIndex;
-	SK_U8		Val8;
-	SK_U32		Val32;
-	SK_BOOL		PortActiveFlag;
-	SK_GEPORT	*pPrt;
-
-	*pBuf = 0;
-	PortActiveFlag = SK_FALSE;
-	PhysPortMax = pAC->GIni.GIMacsFound;
-	
-	for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
-		PhysPortIndex ++) {
-
-		pPrt = &pAC->GIni.GP[PhysPortIndex];
-
-		/* Check if the physical port is active */
-		if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
-
-			continue;
-		}
-
-		PortActiveFlag = SK_TRUE;
-
-		switch (Id) {
-
-		case OID_SKGE_PHY_TYPE:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-				Val32 = pPrt->PhyType;
-				SK_PNMI_STORE_U32(pBuf, Val32);
-				continue;
-			}
-
-		case OID_SKGE_LINK_CAP:
-
-			/*
-			 * Different capabilities should not happen, but
-			 * in the case of the cases OR them all together.
-			 * From a curious point of view the virtual port
-			 * is capable of all found capabilities.
-			 */
-			*pBuf |= pPrt->PLinkCap;
-			break;
-
-		case OID_SKGE_LINK_MODE:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PLinkModeConf;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different link
-			 * mode than the first one we return a value that
-			 * indicates that the link mode is indeterminated.
-			 */
-			if (*pBuf != pPrt->PLinkModeConf) {
-
-				*pBuf = SK_LMODE_INDETERMINATED;
-			}
-			break;
-
-		case OID_SKGE_LINK_MODE_STATUS:
-			/* Get the link mode of the physical port */
-			Val8 = CalculateLinkModeStatus(pAC, IoC, PhysPortIndex);
-
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = Val8;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different link
-			 * mode status than the first one we return a value
-			 * that indicates that the link mode status is
-			 * indeterminated.
-			 */
-			if (*pBuf != Val8) {
-
-				*pBuf = SK_LMODE_STAT_INDETERMINATED;
-			}
-			break;
-
-		case OID_SKGE_LINK_STATUS:
-			/* Get the link status of the physical port */
-			Val8 = CalculateLinkStatus(pAC, IoC, PhysPortIndex);
-
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = Val8;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different link
-			 * status than the first one, we return a value
-			 * that indicates that the link status is
-			 * indeterminated.
-			 */
-			if (*pBuf != Val8) {
-
-				*pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED;
-			}
-			break;
-
-		case OID_SKGE_FLOWCTRL_CAP:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PFlowCtrlCap;
-				continue;
-			}
-
-			/*
-			 * From a curious point of view the virtual port
-			 * is capable of all found capabilities.
-			 */
-			*pBuf |= pPrt->PFlowCtrlCap;
-			break;
-
-		case OID_SKGE_FLOWCTRL_MODE:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PFlowCtrlMode;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different flow
-			 * control mode than the first one, we return a value
-			 * that indicates that the mode is indeterminated.
-			 */
-			if (*pBuf != pPrt->PFlowCtrlMode) {
-
-				*pBuf = SK_FLOW_MODE_INDETERMINATED;
-			}
-			break;
-
-		case OID_SKGE_FLOWCTRL_STATUS:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PFlowCtrlStatus;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different flow
-			 * control status than the first one, we return a
-			 * value that indicates that the status is
-			 * indeterminated.
-			 */
-			if (*pBuf != pPrt->PFlowCtrlStatus) {
-
-				*pBuf = SK_FLOW_STAT_INDETERMINATED;
-			}
-			break;
-		
-		case OID_SKGE_PHY_OPERATION_CAP:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PMSCap;
-				continue;
-			}
-
-			/*
-			 * From a curious point of view the virtual port
-			 * is capable of all found capabilities.
-			 */
-			*pBuf |= pPrt->PMSCap;
-			break;
-
-		case OID_SKGE_PHY_OPERATION_MODE:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PMSMode;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different master/
-			 * slave mode than the first one, we return a value
-			 * that indicates that the mode is indeterminated.
-			 */
-			if (*pBuf != pPrt->PMSMode) {
-
-				*pBuf = SK_MS_MODE_INDETERMINATED;
-			}
-			break;
-
-		case OID_SKGE_PHY_OPERATION_STATUS:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PMSStatus;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different master/
-			 * slave status than the first one, we return a
-			 * value that indicates that the status is
-			 * indeterminated.
-			 */
-			if (*pBuf != pPrt->PMSStatus) {
-
-				*pBuf = SK_MS_STAT_INDETERMINATED;
-			}
-			break;
-		
-		case OID_SKGE_SPEED_MODE:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PLinkSpeed;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different flow
-			 * control mode than the first one, we return a value
-			 * that indicates that the mode is indeterminated.
-			 */
-			if (*pBuf != pPrt->PLinkSpeed) {
-
-				*pBuf = SK_LSPEED_INDETERMINATED;
-			}
-			break;
-		
-		case OID_SKGE_SPEED_STATUS:
-			/* Check if it is the first active port */
-			if (*pBuf == 0) {
-
-				*pBuf = pPrt->PLinkSpeedUsed;
-				continue;
-			}
-
-			/*
-			 * If we find an active port with a different flow
-			 * control status than the first one, we return a
-			 * value that indicates that the status is
-			 * indeterminated.
-			 */
-			if (*pBuf != pPrt->PLinkSpeedUsed) {
-
-				*pBuf = SK_LSPEED_STAT_INDETERMINATED;
-			}
-			break;
-		}
-	}
-
-	/*
-	 * If no port is active return an indeterminated answer
-	 */
-	if (!PortActiveFlag) {
-
-		switch (Id) {
-
-		case OID_SKGE_LINK_CAP:
-			*pBuf = SK_LMODE_CAP_INDETERMINATED;
-			break;
-
-		case OID_SKGE_LINK_MODE:
-			*pBuf = SK_LMODE_INDETERMINATED;
-			break;
-
-		case OID_SKGE_LINK_MODE_STATUS:
-			*pBuf = SK_LMODE_STAT_INDETERMINATED;
-			break;
-
-		case OID_SKGE_LINK_STATUS:
-			*pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED;
-			break;
-
-		case OID_SKGE_FLOWCTRL_CAP:
-		case OID_SKGE_FLOWCTRL_MODE:
-			*pBuf = SK_FLOW_MODE_INDETERMINATED;
-			break;
-
-		case OID_SKGE_FLOWCTRL_STATUS:
-			*pBuf = SK_FLOW_STAT_INDETERMINATED;
-			break;
-			
-		case OID_SKGE_PHY_OPERATION_CAP:
-			*pBuf = SK_MS_CAP_INDETERMINATED;
-			break;
-
-		case OID_SKGE_PHY_OPERATION_MODE:
-			*pBuf = SK_MS_MODE_INDETERMINATED;
-			break;
-
-		case OID_SKGE_PHY_OPERATION_STATUS:
-			*pBuf = SK_MS_STAT_INDETERMINATED;
-			break;
-		case OID_SKGE_SPEED_CAP:
-			*pBuf = SK_LSPEED_CAP_INDETERMINATED;
-			break;
-
-		case OID_SKGE_SPEED_MODE:
-			*pBuf = SK_LSPEED_INDETERMINATED;
-			break;
-
-		case OID_SKGE_SPEED_STATUS:
-			*pBuf = SK_LSPEED_STAT_INDETERMINATED;
-			break;
-		}
-	}
-}
-
-/*****************************************************************************
- *
- * CalculateLinkStatus - Determins the link status of a physical port
- *
- * Description:
- *	Determins the link status the following way:
- *	  LSTAT_PHY_DOWN:  Link is down
- *	  LSTAT_AUTONEG:   Auto-negotiation failed
- *	  LSTAT_LOG_DOWN:  Link is up but RLMT did not yet put the port
- *	                   logically up.
- *	  LSTAT_LOG_UP:    RLMT marked the port as up
- *
- * Returns:
- *	Link status of physical port
- */
-PNMI_STATIC SK_U8 CalculateLinkStatus(
-SK_AC *pAC,			/* Pointer to adapter context */
-SK_IOC IoC,			/* IO context handle */
-unsigned int PhysPortIndex)	/* Physical port index */
-{
-	SK_U8	Result;
-
-	if (!pAC->GIni.GP[PhysPortIndex].PHWLinkUp) {
-
-		Result = SK_PNMI_RLMT_LSTAT_PHY_DOWN;
-	}
-	else if (pAC->GIni.GP[PhysPortIndex].PAutoNegFail > 0) {
-
-		Result = SK_PNMI_RLMT_LSTAT_AUTONEG;
-				}
-	else if (!pAC->Rlmt.Port[PhysPortIndex].PortDown) {
-
-		Result = SK_PNMI_RLMT_LSTAT_LOG_UP;
-	}
-	else {
-		Result = SK_PNMI_RLMT_LSTAT_LOG_DOWN;
-	}
-
-	return (Result);
-}
-
-/*****************************************************************************
- *
- * CalculateLinkModeStatus - Determins the link mode status of a phys. port
- *
- * Description:
- *	The COMMON module only tells us if the mode is half or full duplex.
- *	But in the decade of auto sensing it is useful for the user to
- *	know if the mode was negotiated or forced. Therefore we have a
- *	look to the mode, which was last used by the negotiation process.
- *
- * Returns:
- *	The link mode status
- */
-PNMI_STATIC SK_U8 CalculateLinkModeStatus(
-SK_AC *pAC,			/* Pointer to adapter context */
-SK_IOC IoC,			/* IO context handle */
-unsigned int PhysPortIndex)	/* Physical port index */
-{
-	SK_U8	Result;
-
-	/* Get the current mode, which can be full or half duplex */
-	Result = pAC->GIni.GP[PhysPortIndex].PLinkModeStatus;
-
-	/* Check if no valid mode could be found (link is down) */
-	if (Result < SK_LMODE_STAT_HALF) {
-
-		Result = SK_LMODE_STAT_UNKNOWN;
-	}
-	else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) {
-
-		/*
-		 * Auto-negotiation was used to bring up the link. Change
-		 * the already found duplex status that it indicates
-		 * auto-negotiation was involved.
-		 */
-		if (Result == SK_LMODE_STAT_HALF) {
-
-			Result = SK_LMODE_STAT_AUTOHALF;
-		}
-		else if (Result == SK_LMODE_STAT_FULL) {
-
-			Result = SK_LMODE_STAT_AUTOFULL;
-		}
-	}
-
-	return (Result);
-}
-
-/*****************************************************************************
- *
- * GetVpdKeyArr - Obtain an array of VPD keys
- *
- * Description:
- *	Read the VPD keys and build an array of VPD keys, which are
- *	easy to access.
- *
- * Returns:
- *	SK_PNMI_ERR_OK	     Task successfully performed.
- *	SK_PNMI_ERR_GENERAL  Something went wrong.
- */
-PNMI_STATIC int GetVpdKeyArr(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-char *pKeyArr,		/* Ptr KeyArray */
-unsigned int KeyArrLen,	/* Length of array in bytes */
-unsigned int *pKeyNo)	/* Number of keys */
-{
-	unsigned int		BufKeysLen = SK_PNMI_VPD_BUFSIZE;
-	char			BufKeys[SK_PNMI_VPD_BUFSIZE];
-	unsigned int		StartOffset;
-	unsigned int		Offset;
-	int			Index;
-	int			Ret;
-
-
-	SK_MEMSET(pKeyArr, 0, KeyArrLen);
-
-	/*
-	 * Get VPD key list
-	 */
-	Ret = VpdKeys(pAC, IoC, (char *)&BufKeys, (int *)&BufKeysLen,
-		(int *)pKeyNo);
-	if (Ret > 0) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR014,
-			SK_PNMI_ERR014MSG);
-
-		return (SK_PNMI_ERR_GENERAL);
-	}
-	/* If no keys are available return now */
-	if (*pKeyNo == 0 || BufKeysLen == 0) {
-
-		return (SK_PNMI_ERR_OK);
-	}
-	/*
-	 * If the key list is too long for us trunc it and give a
-	 * errorlog notification. This case should not happen because
-	 * the maximum number of keys is limited due to RAM limitations
-	 */
-	if (*pKeyNo > SK_PNMI_VPD_ENTRIES) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR015,
-			SK_PNMI_ERR015MSG);
-
-		*pKeyNo = SK_PNMI_VPD_ENTRIES;
-	}
-
-	/*
-	 * Now build an array of fixed string length size and copy
-	 * the keys together.
-	 */
-	for (Index = 0, StartOffset = 0, Offset = 0; Offset < BufKeysLen;
-		Offset ++) {
-
-		if (BufKeys[Offset] != 0) {
-
-			continue;
-		}
-
-		if (Offset - StartOffset > SK_PNMI_VPD_KEY_SIZE) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR016,
-				SK_PNMI_ERR016MSG);
-			return (SK_PNMI_ERR_GENERAL);
-		}
-
-		SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE,
-			&BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE);
-
-		Index ++;
-		StartOffset = Offset + 1;
-	}
-
-	/* Last key not zero terminated? Get it anyway */
-	if (StartOffset < Offset) {
-
-		SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE,
-			&BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE);
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * SirqUpdate - Let the SIRQ update its internal values
- *
- * Description:
- *	Just to be sure that the SIRQ module holds its internal data
- *	structures up to date, we send an update event before we make
- *	any access.
- *
- * Returns:
- *	SK_PNMI_ERR_OK	     Task successfully performed.
- *	SK_PNMI_ERR_GENERAL  Something went wrong.
- */
-PNMI_STATIC int SirqUpdate(
-SK_AC *pAC,	/* Pointer to adapter context */
-SK_IOC IoC)	/* IO context handle */
-{
-	SK_EVPARA	EventParam;
-
-
-	/* Was the module already updated during the current PNMI call? */
-	if (pAC->Pnmi.SirqUpdatedFlag > 0) {
-
-		return (SK_PNMI_ERR_OK);
-	}
-
-	/* Send an synchronuous update event to the module */
-	SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
-	if (SkGeSirqEvent(pAC, IoC, SK_HWEV_UPDATE_STAT, EventParam) > 0) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR047,
-			SK_PNMI_ERR047MSG);
-
-		return (SK_PNMI_ERR_GENERAL);
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * RlmtUpdate - Let the RLMT update its internal values
- *
- * Description:
- *	Just to be sure that the RLMT module holds its internal data
- *	structures up to date, we send an update event before we make
- *	any access.
- *
- * Returns:
- *	SK_PNMI_ERR_OK	     Task successfully performed.
- *	SK_PNMI_ERR_GENERAL  Something went wrong.
- */
-PNMI_STATIC int RlmtUpdate(
-SK_AC *pAC,	/* Pointer to adapter context */
-SK_IOC IoC,	/* IO context handle */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode allways zero */
-{
-	SK_EVPARA	EventParam;
-
-
-	/* Was the module already updated during the current PNMI call? */
-	if (pAC->Pnmi.RlmtUpdatedFlag > 0) {
-
-		return (SK_PNMI_ERR_OK);
-	}
-
-	/* Send an synchronuous update event to the module */
-	SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
-	EventParam.Para32[0] = NetIndex;
-	EventParam.Para32[1] = (SK_U32)-1;
-	if (SkRlmtEvent(pAC, IoC, SK_RLMT_STATS_UPDATE, EventParam) > 0) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR048,
-			SK_PNMI_ERR048MSG);
-
-		return (SK_PNMI_ERR_GENERAL);
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * MacUpdate - Force the XMAC to output the current statistic
- *
- * Description:
- *	The XMAC holds its statistic internally. To obtain the current
- *	values we must send a command so that the statistic data will
- *	be written to a predefined memory area on the adapter.
- *
- * Returns:
- *	SK_PNMI_ERR_OK	     Task successfully performed.
- *	SK_PNMI_ERR_GENERAL  Something went wrong.
- */
-PNMI_STATIC int MacUpdate(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-unsigned int FirstMac,	/* Index of the first Mac to be updated */
-unsigned int LastMac)	/* Index of the last Mac to be updated */
-{
-	unsigned int	MacIndex;
-
-	/*
-	 * Were the statistics already updated during the
-	 * current PNMI call?
-	 */
-	if (pAC->Pnmi.MacUpdatedFlag > 0) {
-
-		return (SK_PNMI_ERR_OK);
-	}
-
-	/* Send an update command to all MACs specified */
-	for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) {
-
-		/*
-		 * 2002-09-13 pweber:	Freeze the current SW counters.
-		 *                      (That should be done as close as
-		 *                      possible to the update of the
-		 *                      HW counters)
-		 */
-		if (pAC->GIni.GIMacType == SK_MAC_XMAC) {
-			pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex];
-		}
-			
-		/* 2002-09-13 pweber:  Update the HW counter  */
-		if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) {
-
-			return (SK_PNMI_ERR_GENERAL);
-		}
-	}
-
-	return (SK_PNMI_ERR_OK);
-}
-
-/*****************************************************************************
- *
- * GetStatVal - Retrieve an XMAC statistic counter
- *
- * Description:
- *	Retrieves the statistic counter of a virtual or physical port. The
- *	virtual port is identified by the index 0. It consists of all
- *	currently active ports. To obtain the counter value for this port
- *	we must add the statistic counter of all active ports. To grant
- *	continuous counter values for the virtual port even when port
- *	switches occur we must additionally add a delta value, which was
- *	calculated during a SK_PNMI_EVT_RLMT_ACTIVE_UP event.
- *
- * Returns:
- *	Requested statistic value
- */
-PNMI_STATIC SK_U64 GetStatVal(
-SK_AC *pAC,					/* Pointer to adapter context */
-SK_IOC IoC,					/* IO context handle */
-unsigned int LogPortIndex,	/* Index of the logical Port to be processed */
-unsigned int StatIndex,		/* Index to statistic value */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode allways zero */
-{
-	unsigned int	PhysPortIndex;
-	unsigned int	PhysPortMax;
-	SK_U64			Val = 0;
-
-
-	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {	/* Dual net mode */
-
-		PhysPortIndex = NetIndex;
-		
-		Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
-	}
-	else {	/* Single Net mode */
-
-		if (LogPortIndex == 0) {
-
-			PhysPortMax = pAC->GIni.GIMacsFound;
-
-			/* Add counter of all active ports */
-			for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax;
-				PhysPortIndex ++) {
-
-				if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) {
-
-					Val += GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
-				}
-			}
-
-			/* Correct value because of port switches */
-			Val += pAC->Pnmi.VirtualCounterOffset[StatIndex];
-		}
-		else {
-			/* Get counter value of physical port */
-			PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex);
-			
-			Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex);
-		}
-	}
-	return (Val);
-}
-
-/*****************************************************************************
- *
- * GetPhysStatVal - Get counter value for physical port
- *
- * Description:
- *	Builds a 64bit counter value. Except for the octet counters
- *	the lower 32bit are counted in hardware and the upper 32bit
- *	in software by monitoring counter overflow interrupts in the
- *	event handler. To grant continous counter values during XMAC
- *	resets (caused by a workaround) we must add a delta value.
- *	The delta was calculated in the event handler when a
- *	SK_PNMI_EVT_XMAC_RESET was received.
- *
- * Returns:
- *	Counter value
- */
-PNMI_STATIC SK_U64 GetPhysStatVal(
-SK_AC *pAC,					/* Pointer to adapter context */
-SK_IOC IoC,					/* IO context handle */
-unsigned int PhysPortIndex,	/* Index of the logical Port to be processed */
-unsigned int StatIndex)		/* Index to statistic value */
-{
-	SK_U64	Val = 0;
-	SK_U32	LowVal = 0;
-	SK_U32	HighVal = 0;
-	SK_U16	Word;
-	int		MacType;
-	unsigned int HelpIndex;
-	SK_GEPORT	*pPrt;
-	
-	SK_PNMI_PORT	*pPnmiPrt;
-	SK_GEMACFUNC	*pFnMac;
-	
-	pPrt = &pAC->GIni.GP[PhysPortIndex];
-	
-	MacType = pAC->GIni.GIMacType;
-	
-	/* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */
-	if (MacType == SK_MAC_XMAC) {
-		pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex];
-	}
-	else {
-		pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex];
-	}
-	
-	pFnMac   = &pAC->GIni.GIFunc;
-
-	switch (StatIndex) {
-	case SK_PNMI_HTX:
-		if (MacType == SK_MAC_GMAC) {
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-							StatAddr[SK_PNMI_HTX_BROADCAST][MacType].Reg,
-							&LowVal);
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-							StatAddr[SK_PNMI_HTX_MULTICAST][MacType].Reg,
-							&HighVal);
-			LowVal += HighVal;
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-							StatAddr[SK_PNMI_HTX_UNICAST][MacType].Reg,
-							&HighVal);
-			LowVal += HighVal;
-		}
-		else {
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-										  StatAddr[StatIndex][MacType].Reg,
-										  &LowVal);
-		}
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-	
-	case SK_PNMI_HRX:
-		if (MacType == SK_MAC_GMAC) {
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-							StatAddr[SK_PNMI_HRX_BROADCAST][MacType].Reg,
-							&LowVal);
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-							StatAddr[SK_PNMI_HRX_MULTICAST][MacType].Reg,
-							&HighVal);
-			LowVal += HighVal;
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-							StatAddr[SK_PNMI_HRX_UNICAST][MacType].Reg,
-							&HighVal);
-			LowVal += HighVal;
-		}
-		else {
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-										  StatAddr[StatIndex][MacType].Reg,
-										  &LowVal);
-		}
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-
-	case SK_PNMI_HTX_OCTET:
-	case SK_PNMI_HRX_OCTET:
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &HighVal);
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex + 1][MacType].Reg,
-									  &LowVal);
-		break;
-
-	case SK_PNMI_HTX_BURST:
-	case SK_PNMI_HTX_EXCESS_DEF:
-	case SK_PNMI_HTX_CARRIER:
-		/* Not supported by GMAC */
-		if (MacType == SK_MAC_GMAC) {
-			return (Val);
-		}
-
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &LowVal);
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-
-	case SK_PNMI_HTX_MACC:
-		/* GMAC only supports PAUSE MAC control frames */
-		if (MacType == SK_MAC_GMAC) {
-			HelpIndex = SK_PNMI_HTX_PMACC;
-		}
-		else {
-			HelpIndex = StatIndex;
-		}
-		
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-								StatAddr[HelpIndex][MacType].Reg,
-								&LowVal);
-
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-
-	case SK_PNMI_HTX_COL:
-	case SK_PNMI_HRX_UNDERSIZE:
-		/* Not supported by XMAC */
-		if (MacType == SK_MAC_XMAC) {
-			return (Val);
-		}
-
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &LowVal);
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-
-	case SK_PNMI_HTX_DEFFERAL:
-		/* Not supported by GMAC */
-		if (MacType == SK_MAC_GMAC) {
-			return (Val);
-		}
-		
-		/*
-		 * XMAC counts frames with deferred transmission
-		 * even in full-duplex mode.
-		 *
-		 * In full-duplex mode the counter remains constant!
-		 */
-		if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) ||
-			(pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL)) {
-
-			LowVal = 0;
-			HighVal = 0;
-		}
-		else {
-			/* Otherwise get contents of hardware register */
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-										  StatAddr[StatIndex][MacType].Reg,
-										  &LowVal);
-			HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		}
-		break;
-
-	case SK_PNMI_HRX_BADOCTET:
-		/* Not supported by XMAC */
-		if (MacType == SK_MAC_XMAC) {
-			return (Val);
-		}
-
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &HighVal);
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex + 1][MacType].Reg,
-                                      &LowVal);
-		break;
-
-	case SK_PNMI_HTX_OCTETLOW:
-	case SK_PNMI_HRX_OCTETLOW:
-	case SK_PNMI_HRX_BADOCTETLOW:
-		return (Val);
-
-	case SK_PNMI_HRX_LONGFRAMES:
-		/* For XMAC the SW counter is managed by PNMI */
-		if (MacType == SK_MAC_XMAC) {
-			return (pPnmiPrt->StatRxLongFrameCts);
-		}
-		
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &LowVal);
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-		
-	case SK_PNMI_HRX_TOO_LONG:
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-								StatAddr[StatIndex][MacType].Reg,
-								&LowVal);
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		
-		Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
-
-		if (MacType == SK_MAC_GMAC) {
-			/* For GMAC the SW counter is additionally managed by PNMI */
-			Val += pPnmiPrt->StatRxFrameTooLongCts;
-		}
-		else {
-			/*
-			 * Frames longer than IEEE 802.3 frame max size are counted
-			 * by XMAC in frame_too_long counter even reception of long
-			 * frames was enabled and the frame was correct.
-			 * So correct the value by subtracting RxLongFrame counter.
-			 */
-			Val -= pPnmiPrt->StatRxLongFrameCts;
-		}
-
-		LowVal = (SK_U32)Val;
-		HighVal = (SK_U32)(Val >> 32);
-		break;
-		
-	case SK_PNMI_HRX_SHORTS:
-		/* Not supported by GMAC */
-		if (MacType == SK_MAC_GMAC) {
-			/* GM_RXE_FRAG?? */
-			return (Val);
-		}
-		
-		/*
-		 * XMAC counts short frame errors even if link down (#10620)
-		 *
-		 * If link-down the counter remains constant
-		 */
-		if (pPrt->PLinkModeStatus != SK_LMODE_STAT_UNKNOWN) {
-
-			/* Otherwise get incremental difference */
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-										  StatAddr[StatIndex][MacType].Reg,
-										  &LowVal);
-			HighVal = pPnmiPrt->CounterHigh[StatIndex];
-
-			Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
-			Val -= pPnmiPrt->RxShortZeroMark;
-
-			LowVal = (SK_U32)Val;
-			HighVal = (SK_U32)(Val >> 32);
-		}
-		break;
-
-	case SK_PNMI_HRX_MACC:
-	case SK_PNMI_HRX_MACC_UNKWN:
-	case SK_PNMI_HRX_BURST:
-	case SK_PNMI_HRX_MISSED:
-	case SK_PNMI_HRX_FRAMING:
-	case SK_PNMI_HRX_CARRIER:
-	case SK_PNMI_HRX_IRLENGTH:
-	case SK_PNMI_HRX_SYMBOL:
-	case SK_PNMI_HRX_CEXT:
-		/* Not supported by GMAC */
-		if (MacType == SK_MAC_GMAC) {
-			return (Val);
-		}
-
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &LowVal);
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-
-	case SK_PNMI_HRX_PMACC_ERR:
-		/* For GMAC the SW counter is managed by PNMI */
-		if (MacType == SK_MAC_GMAC) {
-			return (pPnmiPrt->StatRxPMaccErr);
-		}
-		
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &LowVal);
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-
-	/* SW counter managed by PNMI */
-	case SK_PNMI_HTX_SYNC:
-		LowVal = (SK_U32)pPnmiPrt->StatSyncCts;
-		HighVal = (SK_U32)(pPnmiPrt->StatSyncCts >> 32);
-		break;
-
-	/* SW counter managed by PNMI */
-	case SK_PNMI_HTX_SYNC_OCTET:
-		LowVal = (SK_U32)pPnmiPrt->StatSyncOctetsCts;
-		HighVal = (SK_U32)(pPnmiPrt->StatSyncOctetsCts >> 32);
-		break;
-
-	case SK_PNMI_HRX_FCS:
-		/*
-		 * Broadcom filters FCS errors and counts it in
-		 * Receive Error Counter register
-		 */
-		if (pPrt->PhyType == SK_PHY_BCOM) {
-			/* do not read while not initialized (PHY_READ hangs!)*/
-			if (pPrt->PState != SK_PRT_RESET) {
-				SkXmPhyRead(pAC, IoC, PhysPortIndex, PHY_BCOM_RE_CTR, &Word);
-				
-				LowVal = Word;
-			}
-			HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		}
-		else {
-			(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-										  StatAddr[StatIndex][MacType].Reg,
-										  &LowVal);
-			HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		}
-		break;
-
-	default:
-		(void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex,
-									  StatAddr[StatIndex][MacType].Reg,
-									  &LowVal);
-		HighVal = pPnmiPrt->CounterHigh[StatIndex];
-		break;
-	}
-
-	Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal);
-
-	/* Correct value because of possible XMAC reset. XMAC Errata #2 */
-	Val += pPnmiPrt->CounterOffset[StatIndex];
-
-	return (Val);
-}
-
-/*****************************************************************************
- *
- * ResetCounter - Set all counters and timestamps to zero
- *
- * Description:
- *	Notifies other common modules which store statistic data to
- *	reset their counters and finally reset our own counters.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void ResetCounter(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-SK_U32 NetIndex)
-{
-	unsigned int	PhysPortIndex;
-	SK_EVPARA	EventParam;
-
-
-	SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam));
-
-	/* Notify sensor module */
-	SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_CLEAR, EventParam);
-
-	/* Notify RLMT module */
-	EventParam.Para32[0] = NetIndex;
-	EventParam.Para32[1] = (SK_U32)-1;
-	SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STATS_CLEAR, EventParam);
-	EventParam.Para32[1] = 0;
-
-	/* Notify SIRQ module */
-	SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_CLEAR_STAT, EventParam);
-
-	/* Notify CSUM module */
-#ifdef SK_USE_CSUM
-	EventParam.Para32[0] = NetIndex;
-	EventParam.Para32[1] = (SK_U32)-1;
-	SkEventQueue(pAC, SKGE_CSUM, SK_CSUM_EVENT_CLEAR_PROTO_STATS,
-		EventParam);
-#endif /* SK_USE_CSUM */
-	
-	/* Clear XMAC statistic */
-	for (PhysPortIndex = 0; PhysPortIndex <
-		(unsigned int)pAC->GIni.GIMacsFound; PhysPortIndex ++) {
-
-		(void)pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PhysPortIndex);
-
-		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].CounterHigh,
-			0, sizeof(pAC->Pnmi.Port[PhysPortIndex].CounterHigh));
-		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
-			CounterOffset, 0, sizeof(pAC->Pnmi.Port[
-			PhysPortIndex].CounterOffset));
-		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].StatSyncCts,
-			0, sizeof(pAC->Pnmi.Port[PhysPortIndex].StatSyncCts));
-		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
-			StatSyncOctetsCts, 0, sizeof(pAC->Pnmi.Port[
-			PhysPortIndex].StatSyncOctetsCts));
-		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
-			StatRxLongFrameCts, 0, sizeof(pAC->Pnmi.Port[
-			PhysPortIndex].StatRxLongFrameCts));
-		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
-				  StatRxFrameTooLongCts, 0, sizeof(pAC->Pnmi.Port[
-			PhysPortIndex].StatRxFrameTooLongCts));
-		SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].
-				  StatRxPMaccErr, 0, sizeof(pAC->Pnmi.Port[
-			PhysPortIndex].StatRxPMaccErr));
-	}
-
-	/*
-	 * Clear local statistics
-	 */
-	SK_MEMSET((char *)&pAC->Pnmi.VirtualCounterOffset, 0,
-		  sizeof(pAC->Pnmi.VirtualCounterOffset));
-	pAC->Pnmi.RlmtChangeCts = 0;
-	pAC->Pnmi.RlmtChangeTime = 0;
-	SK_MEMSET((char *)&pAC->Pnmi.RlmtChangeEstimate.EstValue[0], 0,
-		sizeof(pAC->Pnmi.RlmtChangeEstimate.EstValue));
-	pAC->Pnmi.RlmtChangeEstimate.EstValueIndex = 0;
-	pAC->Pnmi.RlmtChangeEstimate.Estimate = 0;
-	pAC->Pnmi.Port[NetIndex].TxSwQueueMax = 0;
-	pAC->Pnmi.Port[NetIndex].TxRetryCts = 0;
-	pAC->Pnmi.Port[NetIndex].RxIntrCts = 0;
-	pAC->Pnmi.Port[NetIndex].TxIntrCts = 0;
-	pAC->Pnmi.Port[NetIndex].RxNoBufCts = 0;
-	pAC->Pnmi.Port[NetIndex].TxNoBufCts = 0;
-	pAC->Pnmi.Port[NetIndex].TxUsedDescrNo = 0;
-	pAC->Pnmi.Port[NetIndex].RxDeliveredCts = 0;
-	pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts = 0;
-	pAC->Pnmi.Port[NetIndex].ErrRecoveryCts = 0;
-}
-
-/*****************************************************************************
- *
- * GetTrapEntry - Get an entry in the trap buffer
- *
- * Description:
- *	The trap buffer stores various events. A user application somehow
- *	gets notified that an event occured and retrieves the trap buffer
- *	contens (or simply polls the buffer). The buffer is organized as
- *	a ring which stores the newest traps at the beginning. The oldest
- *	traps are overwritten by the newest ones. Each trap entry has a
- *	unique number, so that applications may detect new trap entries.
- *
- * Returns:
- *	A pointer to the trap entry
- */
-PNMI_STATIC char* GetTrapEntry(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_U32 TrapId,		/* SNMP ID of the trap */
-unsigned int Size)	/* Space needed for trap entry */
-{
-	unsigned int		BufPad = pAC->Pnmi.TrapBufPad;
-	unsigned int		BufFree = pAC->Pnmi.TrapBufFree;
-	unsigned int		Beg = pAC->Pnmi.TrapQueueBeg;
-	unsigned int		End = pAC->Pnmi.TrapQueueEnd;
-	char			*pBuf = &pAC->Pnmi.TrapBuf[0];
-	int			Wrap;
-	unsigned int		NeededSpace;
-	unsigned int		EntrySize;
-	SK_U32			Val32;
-	SK_U64			Val64;
-
-
-	/* Last byte of entry will get a copy of the entry length */
-	Size ++;
-
-	/*
-	 * Calculate needed buffer space */
-	if (Beg >= Size) {
-
-		NeededSpace = Size;
-		Wrap = SK_FALSE;
-	}
-	else {
-		NeededSpace = Beg + Size;
-		Wrap = SK_TRUE;
-	}
-
-	/*
-	 * Check if enough buffer space is provided. Otherwise
-	 * free some entries. Leave one byte space between begin
-	 * and end of buffer to make it possible to detect whether
-	 * the buffer is full or empty
-	 */
-	while (BufFree < NeededSpace + 1) {
-
-		if (End == 0) {
-
-			End = SK_PNMI_TRAP_QUEUE_LEN;
-		}
-
-		EntrySize = (unsigned int)*((unsigned char *)pBuf + End - 1);
-		BufFree += EntrySize;
-		End -= EntrySize;
-#ifdef DEBUG
-		SK_MEMSET(pBuf + End, (char)(-1), EntrySize);
-#endif /* DEBUG */
-		if (End == BufPad) {
-#ifdef DEBUG
-			SK_MEMSET(pBuf, (char)(-1), End);
-#endif /* DEBUG */
-			BufFree += End;
-			End = 0;
-			BufPad = 0;
-		}
-	}
-
-	/*
-	 * Insert new entry as first entry. Newest entries are
-	 * stored at the beginning of the queue.
-	 */
-	if (Wrap) {
-
-		BufPad = Beg;
-		Beg = SK_PNMI_TRAP_QUEUE_LEN - Size;
-	}
-	else {
-		Beg = Beg - Size;
-	}
-	BufFree -= NeededSpace;
-
-	/* Save the current offsets */
-	pAC->Pnmi.TrapQueueBeg = Beg;
-	pAC->Pnmi.TrapQueueEnd = End;
-	pAC->Pnmi.TrapBufPad = BufPad;
-	pAC->Pnmi.TrapBufFree = BufFree;
-
-	/* Initialize the trap entry */
-	*(pBuf + Beg + Size - 1) = (char)Size;
-	*(pBuf + Beg) = (char)Size;
-	Val32 = (pAC->Pnmi.TrapUnique) ++;
-	SK_PNMI_STORE_U32(pBuf + Beg + 1, Val32);
-	SK_PNMI_STORE_U32(pBuf + Beg + 1 + sizeof(SK_U32), TrapId);
-	Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC));
-	SK_PNMI_STORE_U64(pBuf + Beg + 1 + 2 * sizeof(SK_U32), Val64);
-
-	return (pBuf + Beg);
-}
-
-/*****************************************************************************
- *
- * CopyTrapQueue - Copies the trap buffer for the TRAP OID
- *
- * Description:
- *	On a query of the TRAP OID the trap buffer contents will be
- *	copied continuously to the request buffer, which must be large
- *	enough. No length check is performed.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void CopyTrapQueue(
-SK_AC *pAC,		/* Pointer to adapter context */
-char *pDstBuf)		/* Buffer to which the queued traps will be copied */
-{
-	unsigned int	BufPad = pAC->Pnmi.TrapBufPad;
-	unsigned int	Trap = pAC->Pnmi.TrapQueueBeg;
-	unsigned int	End = pAC->Pnmi.TrapQueueEnd;
-	char		*pBuf = &pAC->Pnmi.TrapBuf[0];
-	unsigned int	Len;
-	unsigned int	DstOff = 0;
-
-
-	while (Trap != End) {
-
-		Len = (unsigned int)*(pBuf + Trap);
-
-		/*
-		 * Last byte containing a copy of the length will
-		 * not be copied.
-		 */
-		*(pDstBuf + DstOff) = (char)(Len - 1);
-		SK_MEMCPY(pDstBuf + DstOff + 1, pBuf + Trap + 1, Len - 2);
-		DstOff += Len - 1;
-
-		Trap += Len;
-		if (Trap == SK_PNMI_TRAP_QUEUE_LEN) {
-
-			Trap = BufPad;
-		}
-	}
-}
-
-/*****************************************************************************
- *
- * GetTrapQueueLen - Get the length of the trap buffer
- *
- * Description:
- *	Evaluates the number of currently stored traps and the needed
- *	buffer size to retrieve them.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void GetTrapQueueLen(
-SK_AC *pAC,		/* Pointer to adapter context */
-unsigned int *pLen,	/* Length in Bytes of all queued traps */
-unsigned int *pEntries)	/* Returns number of trapes stored in queue */
-{
-	unsigned int	BufPad = pAC->Pnmi.TrapBufPad;
-	unsigned int	Trap = pAC->Pnmi.TrapQueueBeg;
-	unsigned int	End = pAC->Pnmi.TrapQueueEnd;
-	char		*pBuf = &pAC->Pnmi.TrapBuf[0];
-	unsigned int	Len;
-	unsigned int	Entries = 0;
-	unsigned int	TotalLen = 0;
-
-
-	while (Trap != End) {
-
-		Len = (unsigned int)*(pBuf + Trap);
-		TotalLen += Len - 1;
-		Entries ++;
-
-		Trap += Len;
-		if (Trap == SK_PNMI_TRAP_QUEUE_LEN) {
-
-			Trap = BufPad;
-		}
-	}
-
-	*pEntries = Entries;
-	*pLen = TotalLen;
-}
-
-/*****************************************************************************
- *
- * QueueSimpleTrap - Store a simple trap to the trap buffer
- *
- * Description:
- *	A simple trap is a trap with now additional data. It consists
- *	simply of a trap code.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void QueueSimpleTrap(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_U32 TrapId)		/* Type of sensor trap */
-{
-	GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_SIMPLE_LEN);
-}
-
-/*****************************************************************************
- *
- * QueueSensorTrap - Stores a sensor trap in the trap buffer
- *
- * Description:
- *	Gets an entry in the trap buffer and fills it with sensor related
- *	data.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void QueueSensorTrap(
-SK_AC *pAC,			/* Pointer to adapter context */
-SK_U32 TrapId,			/* Type of sensor trap */
-unsigned int SensorIndex)	/* Index of sensor which caused the trap */
-{
-	char		*pBuf;
-	unsigned int	Offset;
-	unsigned int	DescrLen;
-	SK_U32		Val32;
-
-
-	/* Get trap buffer entry */
-	DescrLen = SK_STRLEN(pAC->I2c.SenTable[SensorIndex].SenDesc);
-	pBuf = GetTrapEntry(pAC, TrapId,
-		SK_PNMI_TRAP_SENSOR_LEN_BASE + DescrLen);
-	Offset = SK_PNMI_TRAP_SIMPLE_LEN;
-
-	/* Store additionally sensor trap related data */
-	Val32 = OID_SKGE_SENSOR_INDEX;
-	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-	*(pBuf + Offset + 4) = 4;
-	Val32 = (SK_U32)SensorIndex;
-	SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32);
-	Offset += 9;
-	
-	Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR;
-	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-	*(pBuf + Offset + 4) = (char)DescrLen;
-	SK_MEMCPY(pBuf + Offset + 5, pAC->I2c.SenTable[SensorIndex].SenDesc,
-		DescrLen);
-	Offset += DescrLen + 5;
-
-	Val32 = OID_SKGE_SENSOR_TYPE;
-	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-	*(pBuf + Offset + 4) = 1;
-	*(pBuf + Offset + 5) = (char)pAC->I2c.SenTable[SensorIndex].SenType;
-	Offset += 6;
-
-	Val32 = OID_SKGE_SENSOR_VALUE;
-	SK_PNMI_STORE_U32(pBuf + Offset, Val32);
-	*(pBuf + Offset + 4) = 4;
-	Val32 = (SK_U32)pAC->I2c.SenTable[SensorIndex].SenValue;
-	SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32);
-}
-
-/*****************************************************************************
- *
- * QueueRlmtNewMacTrap - Store a port switch trap in the trap buffer
- *
- * Description:
- *	Nothing further to explain.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void QueueRlmtNewMacTrap(
-SK_AC *pAC,		/* Pointer to adapter context */
-unsigned int ActiveMac)	/* Index (0..n) of the currently active port */
-{
-	char	*pBuf;
-	SK_U32	Val32;
-
-
-	pBuf = GetTrapEntry(pAC, OID_SKGE_TRAP_RLMT_CHANGE_PORT,
-		SK_PNMI_TRAP_RLMT_CHANGE_LEN);
-
-	Val32 = OID_SKGE_RLMT_PORT_ACTIVE;
-	SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32);
-	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1;
-	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)ActiveMac;
-}
-
-/*****************************************************************************
- *
- * QueueRlmtPortTrap - Store port related RLMT trap to trap buffer
- *
- * Description:
- *	Nothing further to explain.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void QueueRlmtPortTrap(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_U32 TrapId,		/* Type of RLMT port trap */
-unsigned int PortIndex)	/* Index of the port, which changed its state */
-{
-	char	*pBuf;
-	SK_U32	Val32;
-
-
-	pBuf = GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_RLMT_PORT_LEN);
-
-	Val32 = OID_SKGE_RLMT_PORT_INDEX;
-	SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32);
-	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1;
-	*(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)PortIndex;
-}
-
-/*****************************************************************************
- *
- * CopyMac - Copies a MAC address
- *
- * Description:
- *	Nothing further to explain.
- *
- * Returns:
- *	Nothing
- */
-PNMI_STATIC void CopyMac(
-char *pDst,		/* Pointer to destination buffer */
-SK_MAC_ADDR *pMac)	/* Pointer of Source */
-{
-	int	i;
-
-
-	for (i = 0; i < sizeof(SK_MAC_ADDR); i ++) {
-
-		*(pDst + i) = pMac->a[i];
-	}
-}
-
-#ifdef SK_POWER_MGMT
-/*****************************************************************************
- *
- * PowerManagement - OID handler function of PowerManagement OIDs
- *
- * Description:
- *	The code is simple. No description necessary.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                               exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-
-PNMI_STATIC int PowerManagement(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* Get/PreSet/Set action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer to which to mgmt data will be retrieved */
-unsigned int *pLen,	/* On call: buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode allways zero */
-{
-	
-	SK_U32	RetCode = SK_PNMI_ERR_GENERAL;
-
-	/*
-	 * Check instance. We only handle single instance variables
-	 */
-	if (Instance != (SK_U32)(-1) && Instance != 1) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_INST);
-	}
-	
-    
-    /* Check length */
-    switch (Id) {
-
-    case OID_PNP_CAPABILITIES:
-        if (*pLen < sizeof(SK_PNP_CAPABILITIES)) {
-
-            *pLen = sizeof(SK_PNP_CAPABILITIES);
-            return (SK_PNMI_ERR_TOO_SHORT);
-        }
-        break;
-
-	case OID_PNP_SET_POWER:
-    case OID_PNP_QUERY_POWER:
-    	if (*pLen < sizeof(SK_DEVICE_POWER_STATE))
-    	{
-    		*pLen = sizeof(SK_DEVICE_POWER_STATE);
-    		return (SK_PNMI_ERR_TOO_SHORT);
-    	}
-        break;
-
-    case OID_PNP_ADD_WAKE_UP_PATTERN:
-    case OID_PNP_REMOVE_WAKE_UP_PATTERN:
-		if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) {
-
-			*pLen = sizeof(SK_PM_PACKET_PATTERN);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-    case OID_PNP_ENABLE_WAKE_UP:
-        if (*pLen < sizeof(SK_U32)) {
-
-            *pLen = sizeof(SK_U32);
-            return (SK_PNMI_ERR_TOO_SHORT);
-        }
-        break;
-    }
-	
-    /*
-	 * Perform action
-	 */
-	if (Action == SK_PNMI_GET) {
-
-		/*
-		 * Get value
-		 */
-		switch (Id) {
-
-		case OID_PNP_CAPABILITIES:
-			RetCode = SkPowerQueryPnPCapabilities(pAC, IoC, pBuf, pLen);
-			break;
-
-		case OID_PNP_QUERY_POWER:
-			/* The Windows DDK describes: An OID_PNP_QUERY_POWER requests
-			 the miniport to indicate whether it can transition its NIC
-			 to the low-power state.
-			 A miniport driver must always return NDIS_STATUS_SUCCESS
-			 to a query of OID_PNP_QUERY_POWER. */
-			*pLen = sizeof(SK_DEVICE_POWER_STATE);
-            RetCode = SK_PNMI_ERR_OK;
-			break;
-
-			/* NDIS handles these OIDs as write-only.
-			 * So in case of get action the buffer with written length = 0
-			 * is returned
-			 */
-		case OID_PNP_SET_POWER:
-		case OID_PNP_ADD_WAKE_UP_PATTERN:
-		case OID_PNP_REMOVE_WAKE_UP_PATTERN:
-			*pLen = 0;	
-            RetCode = SK_PNMI_ERR_NOT_SUPPORTED;
-			break;
-
-		case OID_PNP_ENABLE_WAKE_UP:
-			RetCode = SkPowerGetEnableWakeUp(pAC, IoC, pBuf, pLen);
-			break;
-
-		default:
-			RetCode = SK_PNMI_ERR_GENERAL;
-			break;
-		}
-
-		return (RetCode);
-	}
-	
-
-	/*
-	 * Perform preset or set
-	 */
-	
-	/* POWER module does not support PRESET action */
-	if (Action == SK_PNMI_PRESET) {
-		return (SK_PNMI_ERR_OK);
-	}
-
-	switch (Id) {
-	case OID_PNP_SET_POWER:
-		RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen);	
-		break;
-
-	case OID_PNP_ADD_WAKE_UP_PATTERN:
-		RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen);	
-		break;
-		
-	case OID_PNP_REMOVE_WAKE_UP_PATTERN:
-		RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen);	
-		break;
-		
-	case OID_PNP_ENABLE_WAKE_UP:
-		RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen);
-		break;
-		
-	default:
-		RetCode = SK_PNMI_ERR_READ_ONLY;
-	}
-	
-	return (RetCode);
-}
-#endif /* SK_POWER_MGMT */
-
-#ifdef SK_DIAG_SUPPORT
-/*****************************************************************************
- *
- * DiagActions - OID handler function of Diagnostic driver 
- *
- * Description:
- *	The code is simple. No description necessary.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-
-PNMI_STATIC int DiagActions(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (1..n) that is to be queried or -1 */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-
-	SK_U32	DiagStatus;
-	SK_U32	RetCode = SK_PNMI_ERR_GENERAL;
-
-	/*
-	 * Check instance. We only handle single instance variables.
-	 */
-	if (Instance != (SK_U32)(-1) && Instance != 1) {
-
-		*pLen = 0;
-		return (SK_PNMI_ERR_UNKNOWN_INST);
-	}
-
-	/*
-	 * Check length.
-	 */
-	switch (Id) {
-
-	case OID_SKGE_DIAG_MODE:
-		if (*pLen < sizeof(SK_U32)) {
-
-			*pLen = sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040, SK_PNMI_ERR040MSG);
-		*pLen = 0;
-		return (SK_PNMI_ERR_GENERAL);
-	}
-
-	/* Perform action. */
-
-	/* GET value. */
-	if (Action == SK_PNMI_GET) {
-
-		switch (Id) {
-
-		case OID_SKGE_DIAG_MODE:
-			DiagStatus = pAC->Pnmi.DiagAttached;
-			SK_PNMI_STORE_U32(pBuf, DiagStatus);
-			*pLen = sizeof(SK_U32);	
-			RetCode = SK_PNMI_ERR_OK;
-			break;
-
-		default:
-			*pLen = 0;	
-			RetCode = SK_PNMI_ERR_GENERAL;
-			break;
-		}
-		return (RetCode); 
-	}
-
-	/* From here SET or PRESET value. */
-	
-	/* PRESET value is not supported. */
-	if (Action == SK_PNMI_PRESET) {
-		return (SK_PNMI_ERR_OK); 
-	}
-
-	/* SET value. */
-	switch (Id) {
-		case OID_SKGE_DIAG_MODE:
-
-			/* Handle the SET. */
-			switch (*pBuf) {
-
-				/* Attach the DIAG to this adapter. */
-				case SK_DIAG_ATTACHED:
-					/* Check if we come from running */
-					if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) {
-
-						RetCode = SkDrvLeaveDiagMode(pAC);
-
-					}
-					else if (pAC->Pnmi.DiagAttached == SK_DIAG_IDLE) {
-
-						RetCode = SK_PNMI_ERR_OK;
-					}	
-					
-					else {
-
-						RetCode = SK_PNMI_ERR_GENERAL;
-
-					}
-					
-					if (RetCode == SK_PNMI_ERR_OK) {
-
-						pAC->Pnmi.DiagAttached = SK_DIAG_ATTACHED;
-					}
-					break;
-
-				/* Enter the DIAG mode in the driver. */
-				case SK_DIAG_RUNNING:
-					RetCode = SK_PNMI_ERR_OK;
-					
-					/*
-					 * If DiagAttached is set, we can tell the driver
-					 * to enter the DIAG mode.
-					 */
-					if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) {
-						/* If DiagMode is not active, we can enter it. */
-						if (!pAC->DiagModeActive) {
-
-							RetCode = SkDrvEnterDiagMode(pAC); 
-						}
-						else {
-
-							RetCode = SK_PNMI_ERR_GENERAL;
-						}
-					}
-					else {
-
-						RetCode = SK_PNMI_ERR_GENERAL;
-					}
-					
-					if (RetCode == SK_PNMI_ERR_OK) {
-
-						pAC->Pnmi.DiagAttached = SK_DIAG_RUNNING;
-					}
-					break;
-
-				case SK_DIAG_IDLE:
-					/* Check if we come from running */
-					if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) {
-
-						RetCode = SkDrvLeaveDiagMode(pAC);
-
-					}
-					else if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) {
-
-						RetCode = SK_PNMI_ERR_OK;
-					}	
-					
-					else {
-
-						RetCode = SK_PNMI_ERR_GENERAL;
-
-					}
-
-					if (RetCode == SK_PNMI_ERR_OK) {
-
-						pAC->Pnmi.DiagAttached = SK_DIAG_IDLE;
-					}
-					break;
-
-				default:
-					RetCode = SK_PNMI_ERR_BAD_VALUE;
-					break;
-			}
-			break;
-
-		default:
-			RetCode = SK_PNMI_ERR_GENERAL;
-	}
-
-	if (RetCode == SK_PNMI_ERR_OK) {
-		*pLen = sizeof(SK_U32);
-	}
-	else {
-
-		*pLen = 0;
-	}
-	return (RetCode);
-}
-#endif /* SK_DIAG_SUPPORT */
-
-/*****************************************************************************
- *
- * Vct - OID handler function of  OIDs
- *
- * Description:
- *	The code is simple. No description necessary.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was performed successfully.
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured.
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to contain
- *	                         the correct data (e.g. a 32bit value is
- *	                         needed, but a 16 bit value was passed).
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter).
- *	SK_PNMI_ERR_READ_ONLY	 Only the Get action is allowed.
- *
- */
-
-PNMI_STATIC int Vct(
-SK_AC *pAC,		/* Pointer to adapter context */
-SK_IOC IoC,		/* IO context handle */
-int Action,		/* GET/PRESET/SET action */
-SK_U32 Id,		/* Object ID that is to be processed */
-char *pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,	/* On call: pBuf buffer length. On return: used buffer */
-SK_U32 Instance,	/* Instance (-1,2..n) that is to be queried */
-unsigned int TableIndex, /* Index to the Id table */
-SK_U32 NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-	SK_GEPORT	*pPrt;
-	SK_PNMI_VCT	*pVctBackupData;
-	SK_U32		LogPortMax;
-	SK_U32		PhysPortMax;
-	SK_U32		PhysPortIndex;
-	SK_U32		Limit;
-	SK_U32		Offset;
-	SK_BOOL		Link;
-	SK_U32		RetCode = SK_PNMI_ERR_GENERAL;
-	int		i;
-	SK_EVPARA	Para;
-	SK_U32		CableLength;
-	
-	/*
-	 * Calculate the port indexes from the instance.
-	 */
-	PhysPortMax = pAC->GIni.GIMacsFound;
-	LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax);
-	
-	/* Dual net mode? */
-	if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-		LogPortMax--;
-	}
-	
-	if ((Instance != (SK_U32) (-1))) {
-		/* Check instance range. */
-		if ((Instance < 2) || (Instance > LogPortMax)) {
-			*pLen = 0;
-			return (SK_PNMI_ERR_UNKNOWN_INST);
-		}
-		
-		if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) {
-			PhysPortIndex = NetIndex;
-		}
-		else {
-			PhysPortIndex = Instance - 2;
-		}
-		Limit = PhysPortIndex + 1;
-	}
-	else {
-		/*
-		 * Instance == (SK_U32) (-1), get all Instances of that OID.
-		 *
-		 * Not implemented yet. May be used in future releases.
-		 */
-		PhysPortIndex = 0;
-		Limit = PhysPortMax;
-	}
-	
-	pPrt = &pAC->GIni.GP[PhysPortIndex];
-	if (pPrt->PHWLinkUp) {
-		Link = SK_TRUE;
-	}
-	else {
-		Link = SK_FALSE;
-	}
-	
-	/* Check MAC type */
-	if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
-		*pLen = 0;
-		return (SK_PNMI_ERR_GENERAL);
-	}
-	
-	/* Initialize backup data pointer. */
-	pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex];
-	
-	/* Check action type */
-	if (Action == SK_PNMI_GET) {
-		/* Check length */
-		switch (Id) {
-		
-		case OID_SKGE_VCT_GET:
-			if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) {
-				*pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			break;
-		
-		case OID_SKGE_VCT_STATUS:
-			if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) {
-				*pLen = (Limit - PhysPortIndex) * sizeof(SK_U8);
-				return (SK_PNMI_ERR_TOO_SHORT);
-			}
-			break;
-		
-		default:
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}	
-		
-		/* Get value */
-		Offset = 0;
-		for (; PhysPortIndex < Limit; PhysPortIndex++) {
-			switch (Id) {
-			
-			case OID_SKGE_VCT_GET:
-				if ((Link == SK_FALSE) &&
-					(pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) {
-					RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE);
-					if (RetCode == 0) {
-						pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING;
-						pAC->Pnmi.VctStatus[PhysPortIndex] |=
-							(SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE);
-						
-						/* Copy results for later use to PNMI struct. */
-						for (i = 0; i < 4; i++)  {
-							if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) {
-								if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] < 0xff)) {
-									pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH;
-								}
-							}
-							if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] != 0xff)) {
-								CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28);
-							}
-							else {
-								CableLength = 0;
-							}
-							pVctBackupData->PMdiPairLen[i] = CableLength;
-							pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i];
-						}
-
-						Para.Para32[0] = PhysPortIndex;
-						Para.Para32[1] = -1;
-						SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
-						SkEventDispatcher(pAC, IoC);
-					}
-					else {
-						; /* VCT test is running. */
-					}
-				}
-				
-				/* Get all results. */
-				CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex);
-				Offset += sizeof(SK_U8);
-				*(pBuf + Offset) = pPrt->PCableLen;
-				Offset += sizeof(SK_U8);
-				for (i = 0; i < 4; i++)  {
-					SK_PNMI_STORE_U32((pBuf + Offset), pVctBackupData->PMdiPairLen[i]);
-					Offset += sizeof(SK_U32);
-				}
-				for (i = 0; i < 4; i++)  {
-					*(pBuf + Offset) = pVctBackupData->PMdiPairSts[i];
-					Offset += sizeof(SK_U8);
-				}
-				
-				RetCode = SK_PNMI_ERR_OK;
-				break;
-		
-			case OID_SKGE_VCT_STATUS:
-				CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex);
-				Offset += sizeof(SK_U8);
-				RetCode = SK_PNMI_ERR_OK;
-				break;
-			
-			default:
-				*pLen = 0;
-				return (SK_PNMI_ERR_GENERAL);
-			}
-		} /* for */
-		*pLen = Offset;
-		return (RetCode);
-	
-	} /* if SK_PNMI_GET */
-	
-	/*
-	 * From here SET or PRESET action. Check if the passed
-	 * buffer length is plausible.
-	 */
-	
-	/* Check length */
-	switch (Id) {
-	case OID_SKGE_VCT_SET:
-		if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) {
-			*pLen = (Limit - PhysPortIndex) * sizeof(SK_U32);
-			return (SK_PNMI_ERR_TOO_SHORT);
-		}
-		break;
-	
-	default:
-		*pLen = 0;
-		return (SK_PNMI_ERR_GENERAL);
-	}
-	
-	/*
-	 * Perform preset or set.
-	 */
-	
-	/* VCT does not support PRESET action. */
-	if (Action == SK_PNMI_PRESET) {
-		return (SK_PNMI_ERR_OK);
-	}
-	
-	Offset = 0;
-	for (; PhysPortIndex < Limit; PhysPortIndex++) {
-		switch (Id) {
-		case OID_SKGE_VCT_SET: /* Start VCT test. */
-			if (Link == SK_FALSE) {
-				SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST);
-				
-				RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE);
-				if (RetCode == 0) { /* RetCode: 0 => Start! */
-					pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING;
-					pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA;
-					pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK;
-					
-					/*
-					 * Start VCT timer counter.
-					 */
-					SK_MEMSET((char *) &Para, 0, sizeof(Para));
-					Para.Para32[0] = PhysPortIndex;
-					Para.Para32[1] = -1;
-					SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer,
-						4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Para);
-					SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
-					RetCode = SK_PNMI_ERR_OK;
-				}
-				else { /* RetCode: 2 => Running! */
-					SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
-					RetCode = SK_PNMI_ERR_OK;
-				}
-			}
-			else { /* RetCode: 4 => Link! */
-				RetCode = 4;
-				SK_PNMI_STORE_U32((pBuf + Offset), RetCode);
-				RetCode = SK_PNMI_ERR_OK;
-			}
-			Offset += sizeof(SK_U32);
-			break;
-	
-		default:
-			*pLen = 0;
-			return (SK_PNMI_ERR_GENERAL);
-		}
-	} /* for */
-	*pLen = Offset;
-	return (RetCode);
-
-} /* Vct */
-
-
-PNMI_STATIC void CheckVctStatus(
-SK_AC		*pAC,
-SK_IOC		IoC,
-char		*pBuf,
-SK_U32		Offset,
-SK_U32		PhysPortIndex)
-{
-	SK_GEPORT 	*pPrt;
-	SK_PNMI_VCT	*pVctData;
-	SK_U32		RetCode;
-	
-	pPrt = &pAC->GIni.GP[PhysPortIndex];
-	
-	pVctData = (SK_PNMI_VCT *) (pBuf + Offset);
-	pVctData->VctStatus = SK_PNMI_VCT_NONE;
-	
-	if (!pPrt->PHWLinkUp) {
-		
-		/* Was a VCT test ever made before? */
-		if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) {
-			if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) {
-				pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA;
-			}
-			else {
-				pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA;
-			}
-		}
-		
-		/* Check VCT test status. */
-		RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE);
-		if (RetCode == 2) { /* VCT test is running. */
-			pVctData->VctStatus |= SK_PNMI_VCT_RUNNING;
-		}
-		else { /* VCT data was copied to pAC here. Check PENDING state. */
-			if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) {
-				pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA;
-			}
-		}
-		
-		if (pPrt->PCableLen != 0xff) { /* Old DSP value. */
-			pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA;
-		}
-	}
-	else {
-		
-		/* Was a VCT test ever made before? */
-		if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) {
-			pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA;
-			pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA;
-		}
-		
-		/* DSP only valid in 100/1000 modes. */
-		if (pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed !=
-			SK_LSPEED_STAT_10MBPS) {	
-			pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA;
-		}
-	}
-} /* CheckVctStatus */
-
-
-/*****************************************************************************
- *
- *      SkPnmiGenIoctl - Handles new generic PNMI IOCTL, calls the needed
- *                       PNMI function depending on the subcommand and
- *                       returns all data belonging to the complete database
- *                       or OID request.
- *
- * Description:
- *	Looks up the requested subcommand, calls the corresponding handler
- *	function and passes all required parameters to it.
- *	The function is called by the driver. It is needed to handle the new
- *  generic PNMI IOCTL. This IOCTL is given to the driver and contains both
- *  the OID and a subcommand to decide what kind of request has to be done.
- *
- * Returns:
- *	SK_PNMI_ERR_OK           The request was successfully performed
- *	SK_PNMI_ERR_GENERAL      A general severe internal error occured
- *	SK_PNMI_ERR_TOO_SHORT    The passed buffer is too short to take
- *	                         the data.
- *	SK_PNMI_ERR_UNKNOWN_OID  The requested OID is unknown
- *	SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't
- *                           exist (e.g. port instance 3 on a two port
- *	                         adapter.
- */
-int SkPnmiGenIoctl(
-SK_AC		*pAC,		/* Pointer to adapter context struct */
-SK_IOC		IoC,		/* I/O context */
-void		*pBuf,		/* Buffer used for the management data transfer */
-unsigned int *pLen,		/* Length of buffer */
-SK_U32		NetIndex)	/* NetIndex (0..n), in single net mode always zero */
-{
-SK_I32	Mode;			/* Store value of subcommand. */
-SK_U32	Oid;			/* Store value of OID. */
-int		ReturnCode;		/* Store return value to show status of PNMI action. */
-int 	HeaderLength;	/* Length of desired action plus OID. */
-
-	ReturnCode = SK_PNMI_ERR_GENERAL;
-	
-	SK_MEMCPY(&Mode, pBuf, sizeof(SK_I32));
-	SK_MEMCPY(&Oid, (char *) pBuf + sizeof(SK_I32), sizeof(SK_U32));
-	HeaderLength = sizeof(SK_I32) + sizeof(SK_U32);
-	*pLen = *pLen - HeaderLength;
-	SK_MEMCPY((char *) pBuf + sizeof(SK_I32), (char *) pBuf + HeaderLength, *pLen);
-	
-	switch(Mode) {
-	case SK_GET_SINGLE_VAR:
-		ReturnCode = SkPnmiGetVar(pAC, IoC, Oid, 
-				(char *) pBuf + sizeof(SK_I32), pLen,
-				((SK_U32) (-1)), NetIndex);
-		SK_PNMI_STORE_U32(pBuf, ReturnCode);
-		*pLen = *pLen + sizeof(SK_I32);
-		break;
-	case SK_PRESET_SINGLE_VAR:
-		ReturnCode = SkPnmiPreSetVar(pAC, IoC, Oid, 
-				(char *) pBuf + sizeof(SK_I32), pLen,
-				((SK_U32) (-1)), NetIndex);
-		SK_PNMI_STORE_U32(pBuf, ReturnCode);
-		*pLen = *pLen + sizeof(SK_I32);
-		break;
-	case SK_SET_SINGLE_VAR:
-		ReturnCode = SkPnmiSetVar(pAC, IoC, Oid, 
-				(char *) pBuf + sizeof(SK_I32), pLen,
-				((SK_U32) (-1)), NetIndex);
-		SK_PNMI_STORE_U32(pBuf, ReturnCode);
-		*pLen = *pLen + sizeof(SK_I32);
-		break;
-	case SK_GET_FULL_MIB:
-		ReturnCode = SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex);
-		break;
-	case SK_PRESET_FULL_MIB:
-		ReturnCode = SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex);
-		break;
-	case SK_SET_FULL_MIB:
-		ReturnCode = SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex);
-		break;
-	default:
-		break;
-	}
-	
-	return (ReturnCode);
-
-} /* SkGeIocGen */
diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c
deleted file mode 100644
index 3e7aa49afd00..000000000000
--- a/drivers/net/sk98lin/skgesirq.c
+++ /dev/null
@@ -1,2229 +0,0 @@
-/******************************************************************************
- *
- * Name:	skgesirq.c
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.92 $
- * Date:	$Date: 2003/09/16 14:37:07 $
- * Purpose:	Special IRQ module
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- *	Special Interrupt handler
- *
- *	The following abstract should show how this module is included
- *	in the driver path:
- *
- *	In the ISR of the driver the bits for frame transmission complete and
- *	for receive complete are checked and handled by the driver itself.
- *	The bits of the slow path mask are checked after that and then the
- *	entry into the so-called "slow path" is prepared. It is an implementors
- *	decision whether this is executed directly or just scheduled by
- *	disabling the mask. In the interrupt service routine some events may be
- *	generated, so it would be a good idea to call the EventDispatcher
- *	right after this ISR.
- *
- *	The Interrupt source register of the adapter is NOT read by this module.
- *  SO if the drivers implementor needs a while loop around the
- *	slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for
- *	each loop entered.
- *
- *	However, the MAC Interrupt status registers are read in a while loop.
- *
- */
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell.";
-#endif
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#ifndef SK_SLIM
-#include "h/skgepnmi.h"		/* PNMI Definitions */
-#include "h/skrlmt.h"		/* RLMT Definitions */
-#endif
-#include "h/skdrv2nd.h"		/* Adapter Control and Driver specific Def. */
-
-/* local function prototypes */
-#ifdef GENESIS
-static int	SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL);
-static int	SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16);
-#endif /* GENESIS */
-#ifdef YUKON
-static int	SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16);
-#endif /* YUKON */
-#ifdef OTHER_PHY
-static int	SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL);
-static int	SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16);
-#endif /* OTHER_PHY */
-
-#ifdef GENESIS
-/*
- * array of Rx counter from XMAC which are checked
- * in AutoSense mode to check whether a link is not able to auto-negotiate.
- */
-static const SK_U16 SkGeRxRegs[]= {
-	XM_RXF_64B,
-	XM_RXF_127B,
-	XM_RXF_255B,
-	XM_RXF_511B,
-	XM_RXF_1023B,
-	XM_RXF_MAX_SZ
-} ;
-#endif /* GENESIS */
-
-#ifdef __C2MAN__
-/*
- *	Special IRQ function
- *
- *	General Description:
- *
- */
-intro()
-{}
-#endif
-
-/******************************************************************************
- *
- *	SkHWInitDefSense() - Default Autosensing mode initialization
- *
- * Description: sets the PLinkMode for HWInit
- *
- * Returns: N/A
- */
-static void SkHWInitDefSense(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
-		pPrt->PLinkMode = pPrt->PLinkModeConf;
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("AutoSensing: First mode %d on Port %d\n",
-		(int)SK_LMODE_AUTOFULL, Port));
-
-	pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;
-
-	return;
-}	/* SkHWInitDefSense */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkHWSenseGetNext() - Get Next Autosensing Mode
- *
- * Description: gets the appropriate next mode
- *
- * Note:
- *
- */
-static SK_U8 SkHWSenseGetNext(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-    if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
-		/* Leave all as configured */
-		return(pPrt->PLinkModeConf);
-	}
-
-    if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) {
-		/* Return next mode AUTOBOTH */
-        return ((SK_U8)SK_LMODE_AUTOBOTH);
-	}
-
-	/* Return default autofull */
-    return ((SK_U8)SK_LMODE_AUTOFULL);
-}	/* SkHWSenseGetNext */
-
-
-/******************************************************************************
- *
- *	SkHWSenseSetNext() - Autosensing Set next mode
- *
- * Description:	sets the appropriate next mode
- *
- * Returns: N/A
- */
-static void SkHWSenseSetNext(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U8	NewMode)	/* New Mode to be written in sense mode */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	pPrt->PAutoNegTimeOut = 0;
-
-    if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) {
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("AutoSensing: next mode %d on Port %d\n",
-		(int)NewMode, Port));
-
-	pPrt->PLinkMode = NewMode;
-
-	return;
-}	/* SkHWSenseSetNext */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- *	SkHWLinkDown() - Link Down handling
- *
- * Description: handles the hardware link down signal
- *
- * Returns: N/A
- */
-void SkHWLinkDown(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Disable all MAC interrupts */
-	SkMacIrqDisable(pAC, IoC, Port);
-
-	/* Disable Receiver and Transmitter */
-	SkMacRxTxDisable(pAC, IoC, Port);
-	
-	/* Init default sense mode */
-	SkHWInitDefSense(pAC, IoC, Port);
-
-	if (pPrt->PHWLinkUp == SK_FALSE) {
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("Link down Port %d\n", Port));
-
-	/* Set Link to DOWN */
-	pPrt->PHWLinkUp = SK_FALSE;
-
-	/* Reset Port stati */
-    pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
-    pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
-	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED;
-
-	/* Re-init Phy especially when the AutoSense default is set now */
-	SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
-
-	/* GP0: used for workaround of Rev. C Errata 2 */
-
-	/* Do NOT signal to RLMT */
-
-	/* Do NOT start the timer here */
-}	/* SkHWLinkDown */
-
-
-/******************************************************************************
- *
- *	SkHWLinkUp() - Link Up handling
- *
- * Description: handles the hardware link up signal
- *
- * Returns: N/A
- */
-static void SkHWLinkUp(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		/* We do NOT need to proceed on active link */
-		return;
-	}
-
-	pPrt->PHWLinkUp = SK_TRUE;
-	pPrt->PAutoNegFail = SK_FALSE;
-    pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
-
-    if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF &&
-        pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL &&
-        pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) {
-		/* Link is up and no Auto-negotiation should be done */
-
-		/* Link speed should be the configured one */
-		switch (pPrt->PLinkSpeed) {
-		case SK_LSPEED_AUTO:
-			/* default is 1000 Mbps */
-		case SK_LSPEED_1000MBPS:
-			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
-			break;
-		case SK_LSPEED_100MBPS:
-			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
-			break;
-		case SK_LSPEED_10MBPS:
-			pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
-			break;
-		}
-
-		/* Set Link Mode Status */
-		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL;
-		}
-		else {
-            pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF;
-		}
-
-		/* No flow control without auto-negotiation */
-        pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
-
-		/* enable Rx/Tx */
-        (void)SkMacRxTxEnable(pAC, IoC, Port);
-	}
-}	/* SkHWLinkUp */
-
-
-/******************************************************************************
- *
- *	SkMacParity() - MAC parity workaround
- *
- * Description: handles MAC parity errors correctly
- *
- * Returns: N/A
- */
-static void SkMacParity(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index of the port failed */
-{
-	SK_EVPARA	Para;
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U32		TxMax;		/* Tx Max Size Counter */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Clear IRQ Tx Parity Error */
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-
-		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T),
-			(SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON &&
-			pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE));
-	}
-#endif /* YUKON */
-	
-	if (pPrt->PCheckPar) {
-
-		if (Port == MAC_1) {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG);
-		}
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG);
-		}
-		Para.Para64 = Port;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		
-		Para.Para32[0] = Port;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-
-		return;
-	}
-
-	/* Check whether frames with a size of 1k were sent */
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		/* Snap statistic counters */
-		(void)SkXmUpdateStats(pAC, IoC, Port);
-		
-		(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-
-		(void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax);
-	}
-#endif /* YUKON */
-	
-	if (TxMax > 0) {
-		/* From now on check the parity */
-		pPrt->PCheckPar = SK_TRUE;
-	}
-}	/* SkMacParity */
-
-
-/******************************************************************************
- *
- *	SkGeHwErr() - Hardware Error service routine
- *
- * Description: handles all HW Error interrupts
- *
- * Returns: N/A
- */
-static void SkGeHwErr(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-SK_U32	HwStatus)	/* Interrupt status word */
-{
-	SK_EVPARA	Para;
-	SK_U16		Word;
-
-	if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) {
-		/* PCI Errors occured */
-		if ((HwStatus & IS_IRQ_STAT) != 0) {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG);
-		}
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG);
-		}
-
-		/* Reset all bits in the PCI STATUS register */
-		SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-		
-		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-        SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
-		SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-
-		if ((HwStatus & IS_NO_STAT_M1) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT);
-		}
-
-		if ((HwStatus & IS_NO_STAT_M2) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT);
-		}
-
-		if ((HwStatus & IS_NO_TIST_M1) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST);
-		}
-
-		if ((HwStatus & IS_NO_TIST_M2) != 0) {
-			/* Ignore it */
-			/* This situation is also indicated in the descriptor */
-			SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST);
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* This is necessary only for Rx timing measurements */
-		if ((HwStatus & IS_IRQ_TIST_OV) != 0) {
-			/* increment Time Stamp Timer counter (high) */
-			pAC->GIni.GITimeStampCnt++;
-
-			/* Clear Time Stamp Timer IRQ */
-			SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ);
-		}
-
-		if ((HwStatus & IS_IRQ_SENSOR) != 0) {
-			/* no sensors on 32-bit Yukon */
-			if (pAC->GIni.GIYukon32Bit) {
-				/* disable HW Error IRQ */
-				pAC->GIni.GIValIrqMask &= ~IS_HW_ERR;
-			}
-		}
-	}
-#endif /* YUKON */
-
-	if ((HwStatus & IS_RAM_RD_PAR) != 0) {
-		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR);
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG);
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-	if ((HwStatus & IS_RAM_WR_PAR) != 0) {
-		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR);
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG);
-		Para.Para64 = 0;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
-	}
-
-	if ((HwStatus & IS_M1_PAR_ERR) != 0) {
-		SkMacParity(pAC, IoC, MAC_1);
-	}
-
-	if ((HwStatus & IS_M2_PAR_ERR) != 0) {
-		SkMacParity(pAC, IoC, MAC_2);
-	}
-
-	if ((HwStatus & IS_R1_PAR_ERR) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P);
-
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((HwStatus & IS_R2_PAR_ERR) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P);
-
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-}	/* SkGeHwErr */
-
-
-/******************************************************************************
- *
- *	SkGeSirqIsr() - Special Interrupt Service Routine
- *
- * Description: handles all non data transfer specific interrupts (slow path)
- *
- * Returns: N/A
- */
-void SkGeSirqIsr(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-SK_U32	Istatus)	/* Interrupt status word */
-{
-	SK_EVPARA	Para;
-	SK_U32		RegVal32;	/* Read register value */
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U16 		PhyInt;
-	int			i;
-
-	if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) {
-		/* read the HW Error Interrupt source */
-		SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
-		
-		SkGeHwErr(pAC, IoC, RegVal32);
-	}
-
-	/*
-	 * Packet Timeout interrupts
-	 */
-	/* Check whether MACs are correctly initialized */
-	if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) &&
-		pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) {
-		/* MAC 1 was not initialized but Packet timeout occured */
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
-			SKERR_SIRQ_E004MSG);
-	}
-
-	if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) &&
-	    pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) {
-		/* MAC 2 was not initialized but Packet timeout occured */
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
-			SKERR_SIRQ_E005MSG);
-	}
-
-	if ((Istatus & IS_PA_TO_RX1) != 0) {
-		/* Means network is filling us up */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002,
-			SKERR_SIRQ_E002MSG);
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1);
-	}
-
-	if ((Istatus & IS_PA_TO_RX2) != 0) {
-		/* Means network is filling us up */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003,
-			SKERR_SIRQ_E003MSG);
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2);
-	}
-
-	if ((Istatus & IS_PA_TO_TX1) != 0) {
-		
-		pPrt = &pAC->GIni.GP[0];
-
-		/* May be a normal situation in a server with a slow network */
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1);
-
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			/*
-			 * workaround: if in half duplex mode, check for Tx hangup.
-			 * Read number of TX'ed bytes, wait for 10 ms, then compare
-			 * the number with current value. If nothing changed, we assume
-			 * that Tx is hanging and do a FIFO flush (see event routine).
-			 */
-			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
-				!pPrt->HalfDupTimerActive) {
-				/*
-				 * many more pack. arb. timeouts may come in between,
-				 * we ignore those
-				 */
-				pPrt->HalfDupTimerActive = SK_TRUE;
-				/* Snap statistic counters */
-				(void)SkXmUpdateStats(pAC, IoC, 0);
-
-				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32);
-
-				pPrt->LastOctets = (SK_U64)RegVal32 << 32;
-				
-				(void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32);
-
-				pPrt->LastOctets += RegVal32;
-				
-				Para.Para32[0] = 0;
-				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
-					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
-			}
-		}
-#endif /* GENESIS */
-	}
-
-	if ((Istatus & IS_PA_TO_TX2) != 0) {
-		
-		pPrt = &pAC->GIni.GP[1];
-
-		/* May be a normal situation in a server with a slow network */
-		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2);
-
-#ifdef GENESIS
-		if (pAC->GIni.GIGenesis) {
-			/* workaround: see above */
-			if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-				 pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) &&
-				!pPrt->HalfDupTimerActive) {
-				pPrt->HalfDupTimerActive = SK_TRUE;
-				/* Snap statistic counters */
-				(void)SkXmUpdateStats(pAC, IoC, 1);
-
-				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32);
-
-				pPrt->LastOctets = (SK_U64)RegVal32 << 32;
-				
-				(void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32);
-
-				pPrt->LastOctets += RegVal32;
-				
-				Para.Para32[0] = 1;
-				SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME,
-					SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para);
-			}
-		}
-#endif /* GENESIS */
-	}
-
-	/* Check interrupts of the particular queues */
-	if ((Istatus & IS_R1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006,
-			SKERR_SIRQ_E006MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_R2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007,
-			SKERR_SIRQ_E007MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XS1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008,
-			SKERR_SIRQ_E008MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XA1_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009,
-			SKERR_SIRQ_E009MSG);
-		Para.Para64 = MAC_1;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_1;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XS2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010,
-			SKERR_SIRQ_E010MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	if ((Istatus & IS_XA2_C) != 0) {
-		/* Clear IRQ */
-		SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C);
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011,
-			SKERR_SIRQ_E011MSG);
-		Para.Para64 = MAC_2;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-		Para.Para32[0] = MAC_2;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-	/* External reg interrupt */
-	if ((Istatus & IS_EXT_REG) != 0) {
-		/* Test IRQs from PHY */
-		for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-			
-			pPrt = &pAC->GIni.GP[i];
-			
-			if (pPrt->PState == SK_PRT_RESET) {
-				continue;
-			}
-			
-#ifdef GENESIS
-			if (pAC->GIni.GIGenesis) {
-				
-				switch (pPrt->PhyType) {
-				
-				case SK_PHY_XMAC:
-					break;
-				
-				case SK_PHY_BCOM:
-					SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt);
-	
-					if ((PhyInt & ~PHY_B_DEF_MSK) != 0) {
-						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-							("Port %d Bcom Int: 0x%04X\n",
-							i, PhyInt));
-						SkPhyIsrBcom(pAC, IoC, i, PhyInt);
-					}
-					break;
-#ifdef OTHER_PHY
-				case SK_PHY_LONE:
-					SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt);
-					
-					if ((PhyInt & PHY_L_DEF_MSK) != 0) {
-						SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-							("Port %d Lone Int: %x\n",
-							i, PhyInt));
-						SkPhyIsrLone(pAC, IoC, i, PhyInt);
-					}
-					break;
-#endif /* OTHER_PHY */
-				}
-			}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-			if (pAC->GIni.GIYukon) {
-				/* Read PHY Interrupt Status */
-				SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt);
-
-				if ((PhyInt & PHY_M_DEF_MSK) != 0) {
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Port %d Marv Int: 0x%04X\n",
-						i, PhyInt));
-					SkPhyIsrGmac(pAC, IoC, i, PhyInt);
-				}
-			}
-#endif /* YUKON */
-		}
-	}
-
-	/* I2C Ready interrupt */
-	if ((Istatus & IS_I2C_READY) != 0) {
-#ifdef SK_SLIM
-        SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
-#else		
-		SkI2cIsr(pAC, IoC);
-#endif		
-	}
-
-	/* SW forced interrupt */
-	if ((Istatus & IS_IRQ_SW) != 0) {
-		/* clear the software IRQ */
-		SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ);
-	}
-
-	if ((Istatus & IS_LNK_SYNC_M1) != 0) {
-		/*
-		 * We do NOT need the Link Sync interrupt, because it shows
-		 * us only a link going down.
-		 */
-		/* clear interrupt */
-		SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ);
-	}
-
-	/* Check MAC after link sync counter */
-	if ((Istatus & IS_MAC1) != 0) {
-		/* IRQ from MAC 1 */
-		SkMacIrq(pAC, IoC, MAC_1);
-	}
-
-	if ((Istatus & IS_LNK_SYNC_M2) != 0) {
-		/*
-		 * We do NOT need the Link Sync interrupt, because it shows
-		 * us only a link going down.
-		 */
-		/* clear interrupt */
-		SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ);
-	}
-
-	/* Check MAC after link sync counter */
-	if ((Istatus & IS_MAC2) != 0) {
-		/* IRQ from MAC 2 */
-		SkMacIrq(pAC, IoC, MAC_2);
-	}
-
-	/* Timer interrupt (served last) */
-	if ((Istatus & IS_TIMINT) != 0) {
-		/* check for HW Errors */
-		if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) {
-			/* read the HW Error Interrupt source */
-			SK_IN32(IoC, B0_HWE_ISRC, &RegVal32);
-
-			SkGeHwErr(pAC, IoC, RegVal32);
-		}
-
-		SkHwtIsr(pAC, IoC);
-	}
-
-}	/* SkGeSirqIsr */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- */
-static int SkGePortCheckShorts(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	SK_U32		Shorts;			/* Short Event Counter */
-	SK_U32		CheckShorts;	/* Check value for Short Event Counter */
-	SK_U64		RxCts;			/* Rx Counter (packets on network) */
-	SK_U32		RxTmp;			/* Rx temp. Counter */
-	SK_U32		FcsErrCts;		/* FCS Error Counter */
-	SK_GEPORT	*pPrt;			/* GIni Port struct pointer */
-	int			Rtv;			/* Return value */
-	int			i;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Default: no action */
-	Rtv = SK_HW_PS_NONE;
-
-	(void)SkXmUpdateStats(pAC, IoC, Port);
-
-	/* Extra precaution: check for short Event counter */
-	(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
-
-	/*
-	 * Read Rx counters (packets seen on the network and not necessarily
-	 * really received.
-	 */
-	RxCts = 0;
-
-	for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) {
-		
-		(void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp);
-		
-		RxCts += (SK_U64)RxTmp;
-	}
-
-	/* On default: check shorts against zero */
-	CheckShorts = 0;
-
-	/* Extra precaution on active links */
-	if (pPrt->PHWLinkUp) {
-		/* Reset Link Restart counter */
-		pPrt->PLinkResCt = 0;
-		pPrt->PAutoNegTOCt = 0;
-
-		/* If link is up check for 2 */
-		CheckShorts = 2;
-
-		(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts);
-		
-		if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-		    pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN &&
-		    (pPrt->PLinkMode == SK_LMODE_HALF ||
-			 pPrt->PLinkMode == SK_LMODE_FULL)) {
-			/*
-			 * This is autosensing and we are in the fallback
-			 * manual full/half duplex mode.
-			 */
-			if (RxCts == pPrt->PPrevRx) {
-				/* Nothing received, restart link */
-				pPrt->PPrevFcs = FcsErrCts;
-				pPrt->PPrevShorts = Shorts;
-				
-				return(SK_HW_PS_RESTART);
-			}
-			else {
-				pPrt->PLipaAutoNeg = SK_LIPA_MANUAL;
-			}
-		}
-
-		if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) ||
-		    (!(FcsErrCts - pPrt->PPrevFcs))) {
-			/*
-			 * Note: The compare with zero above has to be done the way shown,
-			 * otherwise the Linux driver will have a problem.
-			 */
-			/*
-			 * We received a bunch of frames or no CRC error occured on the
-			 * network -> ok.
-			 */
-			pPrt->PPrevRx = RxCts;
-			pPrt->PPrevFcs = FcsErrCts;
-			pPrt->PPrevShorts = Shorts;
-
-			return(SK_HW_PS_NONE);
-		}
-
-		pPrt->PPrevFcs = FcsErrCts;
-	}
-
-
-	if ((Shorts - pPrt->PPrevShorts) > CheckShorts) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Short Event Count Restart Port %d \n", Port));
-		Rtv = SK_HW_PS_RESTART;
-	}
-
-	pPrt->PPrevShorts = Shorts;
-	pPrt->PPrevRx = RxCts;
-
-	return(Rtv);
-}	/* SkGePortCheckShorts */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUp() - Check if the link is up
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUp(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port)		/* Which port should be checked */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_BOOL		AutoNeg;	/* Is Auto-negotiation used ? */
-	int			Rtv;		/* Return value */
-
-	Rtv = SK_HW_PS_NONE;
-	
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		AutoNeg = SK_FALSE;
-	}
-	else {
-		AutoNeg = SK_TRUE;
-	}
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-
-		switch (pPrt->PhyType) {
-		
-		case SK_PHY_XMAC:
-			Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg);
-			break;
-		case SK_PHY_BCOM:
-			Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg);
-			break;
-#ifdef OTHER_PHY
-		case SK_PHY_LONE:
-			Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg);
-			break;
-		case SK_PHY_NAT:
-			Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg);
-			break;
-#endif /* OTHER_PHY */
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg);
-	}
-#endif /* YUKON */
-
-	return(Rtv);	
-}	/* SkGePortCheckUp */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpXmac(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_U32		Shorts;		/* Short Event Counter */
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U32		GpReg;		/* General Purpose register value */
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		IsrcSum;	/* Interrupt source register sum */
-	SK_U16		LpAb;		/* Link Partner Ability */
-	SK_U16		ResAb;		/* Resolved Ability */
-	SK_U16		ExtStat;	/* Extended Status Register */
-	SK_U8		NextMode;	/* Next AutoSensing Mode */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		if (pPrt->PhyType != SK_PHY_XMAC) {
-			return(SK_HW_PS_NONE);
-		}
-		else {
-			return(SkGePortCheckShorts(pAC, IoC, Port));
-		}
-	}
-
-	IsrcSum = pPrt->PIsave;
-	pPrt->PIsave = 0;
-
-	/* Now wait for each port's link */
-	if (pPrt->PLinkBroken) {
-		/* Link was broken */
-		XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
-
-		if ((GpReg & XM_GP_INP_ASS) == 0) {
-			/* The Link is in sync */
-			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-			IsrcSum |= Isrc;
-			SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
-			
-			if ((Isrc & XM_IS_INP_ASS) == 0) {
-				/* It has been in sync since last time */
-				/* Restart the PORT */
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Link in sync Restart Port %d\n", Port));
-
-				(void)SkXmUpdateStats(pAC, IoC, Port);
-
-				/* We now need to reinitialize the PrevShorts counter */
-				(void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts);
-				pPrt->PPrevShorts = Shorts;
-
-				pPrt->PLinkBroken = SK_FALSE;
-
-				/*
-				 * Link Restart Workaround:
-				 *  it may be possible that the other Link side
-				 *  restarts its link as well an we detect
-				 *  another LinkBroken. To prevent this
-				 *  happening we check for a maximum number
-				 *  of consecutive restart. If those happens,
-				 *  we do NOT restart the active link and
-				 *  check whether the link is now o.k.
-				 */
-				pPrt->PLinkResCt++;
-				
-				pPrt->PAutoNegTimeOut = 0;
-
-				if (pPrt->PLinkResCt < SK_MAX_LRESTART) {
-					return(SK_HW_PS_RESTART);
-				}
-
-				pPrt->PLinkResCt = 0;
-				
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum));
-			}
-			else {
-				pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
-				
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum));
-
-				/* Do nothing more if link is broken */
-				return(SK_HW_PS_NONE);
-			}
-		}
-		else {
-			/* Do nothing more if link is broken */
-			return(SK_HW_PS_NONE);
-		}
-
-	}
-	else {
-		/* Link was not broken, check if it is */
-		XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-		IsrcSum |= Isrc;
-		if ((Isrc & XM_IS_INP_ASS) != 0) {
-			XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-			IsrcSum |= Isrc;
-			if ((Isrc & XM_IS_INP_ASS) != 0) {
-				XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-				IsrcSum |= Isrc;
-				if ((Isrc & XM_IS_INP_ASS) != 0) {
-					pPrt->PLinkBroken = SK_TRUE;
-					/* Re-Init Link partner Autoneg flag */
-					pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
-					SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-						("Link broken Port %d\n", Port));
-
-					/* Cable removed-> reinit sense mode */
-					SkHWInitDefSense(pAC, IoC, Port);
-
-					return(SK_HW_PS_RESTART);
-				}
-			}
-		}
-		else {
-			SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc);
-			
-			if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) {
-				return(SK_HW_PS_RESTART);
-			}
-		}
-	}
-
-	/*
-	 * here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-	XM_IN32(IoC, Port, XM_GP_PORT, &GpReg);
-	XM_IN16(IoC, Port, XM_ISRC, &Isrc);
-	IsrcSum |= Isrc;
-
-	SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
-	
-	if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) {
-		if ((GpReg & XM_GP_INP_ASS) == 0) {
-			/* Save Auto-negotiation Done interrupt only if link is in sync */
-			pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND);
-		}
-#ifdef DEBUG
-		if ((pPrt->PIsave & XM_IS_AND) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done rescheduled Port %d\n", Port));
-		}
-#endif /* DEBUG */
-		return(SK_HW_PS_NONE);
-	}
-
-	if (AutoNeg) {
-		if ((IsrcSum & XM_IS_AND) != 0) {
-			SkHWLinkUp(pAC, IoC, Port);
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			if (Done != SK_AND_OK) {
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n",
-					 Port, LpAb, ResAb));
-					
-				/* Try next possible mode */
-				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
-				SkHWLinkDown(pAC, IoC, Port);
-				if (Done == SK_AND_DUP_CAP) {
-					/* GoTo next mode */
-					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
-				}
-
-				return(SK_HW_PS_RESTART);
-			}
-			/*
-			 * Dummy Read extended status to prevent extra link down/ups
-			 * (clear Page Received bit if set)
-			 */
-			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat);
-			
-			return(SK_HW_PS_LINK);
-		}
-		
-		/* AutoNeg not done, but HW link is up. Check for timeouts */
-		pPrt->PAutoNegTimeOut++;
-		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
-			/* Increase the Timeout counter */
-			pPrt->PAutoNegTOCt++;
-
-			/* Timeout occured */
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-				("AutoNeg timeout Port %d\n", Port));
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
-				/* Set Link manually up */
-				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Set manual full duplex Port %d\n", Port));
-			}
-
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg == SK_LIPA_AUTO &&
-				pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) {
-				/*
-				 * This is rather complicated.
-				 * we need to check here whether the LIPA_AUTO
-				 * we saw before is false alert. We saw at one
-				 * switch ( SR8800) that on boot time it sends
-				 * just one auto-neg packet and does no further
-				 * auto-negotiation.
-				 * Solution: we restart the autosensing after
-				 * a few timeouts.
-				 */
-				pPrt->PAutoNegTOCt = 0;
-				pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
-				SkHWInitDefSense(pAC, IoC, Port);
-			}
-
-			/* Do the restart */
-			return(SK_HW_PS_RESTART);
-		}
-	}
-	else {
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		/*
-		 * Link sync (GP) and so assume a good connection. But if not received
-		 * a bunch of frames received in a time slot (maybe broken tx cable)
-		 * the port is restart.
-		 */
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpXmac */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpBcom(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		PhyStat;	/* Phy Status Register */
-	SK_U16		ResAb;		/* Master/Slave resolution */
-	SK_U16		Ctrl;		/* Broadcom control flags */
-#ifdef DEBUG
-	SK_U16		LpAb;
-	SK_U16		ExtStat;
-#endif /* DEBUG */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Check for No HCD Link events (#10523) */
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc);
-
-#ifdef xDEBUG
-	if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) ==
-		(PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) {
-
-		SK_U32	Stat1, Stat2, Stat3;
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"CheckUp1 - Stat: %x, Mask: %x",
-			(void *)Isrc,
-			(void *)Stat1);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"Ctrl/Stat: %x, AN Adv/LP: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-	}
-#endif /* DEBUG */
-
-	if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) {
-		/*
-		 * Workaround BCom Errata:
-		 *	enable and disable loopback mode if "NO HCD" occurs.
-		 */
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl);
-		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
-			(SK_U16)(Ctrl | PHY_CT_LOOP));
-		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL,
-			(SK_U16)(Ctrl & ~PHY_CT_LOOP));
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("No HCD Link event, Port %d\n", Port));
-#ifdef xDEBUG
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"No HCD link event, port %d.",
-			(void *)Port,
-			(void *)NULL);
-#endif /* DEBUG */
-	}
-
-	/* Not obsolete: link status bit is latched to 0 and autoclearing! */
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-#ifdef xDEBUG
-	{
-		SK_U32	Stat1, Stat2, Stat3;
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1);
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"CheckUp1a - Stat: %x, Mask: %x",
-			(void *)Isrc,
-			(void *)Stat1);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-		Stat1 = Stat1 << 16 | PhyStat;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"Ctrl/Stat: %x, AN Adv/LP: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
-		Stat2 = Stat2 << 16 | ResAb;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-
-		Stat1 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1);
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2);
-		Stat1 = Stat1 << 16 | Stat2;
-		Stat2 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2);
-		Stat3 = 0;
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3);
-		Stat2 = Stat2 << 16 | Stat3;
-		CMSMPrintString(
-			pAC->pConfigTable,
-			MSG_TYPE_RUNTIME_INFO,
-			"PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x",
-			(void *)Stat1,
-			(void *)Stat2);
-	}
-#endif /* DEBUG */
-
-	/*
-	 * Here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat);
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
-
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
-
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault port %d\n", Port));
-		
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-		
-		return(SK_HW_PS_RESTART);
-	}
-
-	if ((PhyStat & PHY_ST_LSYNC) == 0) {
-		return(SK_HW_PS_NONE);
-	}
-	
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Port %d, ResAb: 0x%04X\n", Port, ResAb));
-
-	if (AutoNeg) {
-		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
-			
-			SkHWLinkUp(pAC, IoC, Port);
-			
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			
-			if (Done != SK_AND_OK) {
-#ifdef DEBUG
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
-					Port, LpAb, ExtStat));
-#endif /* DEBUG */
-				return(SK_HW_PS_RESTART);
-			}
-			else {
-#ifdef xDEBUG
-				/* Dummy read ISR to prevent extra link downs/ups */
-				SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
-
-				if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
-					CMSMPrintString(
-						pAC->pConfigTable,
-						MSG_TYPE_RUNTIME_INFO,
-						"CheckUp2 - Stat: %x",
-						(void *)ExtStat,
-						(void *)NULL);
-				}
-#endif /* DEBUG */
-				return(SK_HW_PS_LINK);
-			}
-		}
-	}
-	else {	/* !AutoNeg */
-		/* Link is up and we don't need more. */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-#ifdef xDEBUG
-		/* Dummy read ISR to prevent extra link downs/ups */
-		SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat);
-
-		if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) {
-			CMSMPrintString(
-				pAC->pConfigTable,
-				MSG_TYPE_RUNTIME_INFO,
-				"CheckUp3 - Stat: %x",
-				(void *)ExtStat,
-				(void *)NULL);
-		}
-#endif /* DEBUG */
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpBcom */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpGmac(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		PhyIsrc;	/* PHY Interrupt source */
-	SK_U16		PhyStat;	/* PPY Status */
-	SK_U16		PhySpecStat;/* PHY Specific Status */
-	SK_U16		ResAb;		/* Master/Slave resolution */
-	SK_EVPARA	Para;
-#ifdef DEBUG
-	SK_U16		Word;		/* I/O helper */
-#endif /* DEBUG */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-	/* Read PHY Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat));
-
-	/* Read PHY Interrupt Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc);
-
-	if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc));
-	}
-
-	if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc));
-	}
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-	
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
-
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault port %d\n", Port));
-		
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-		
-		return(SK_HW_PS_RESTART);
-	}
-
-	/* Read PHY Specific Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat));
-
-#ifdef DEBUG
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word);
-
-	if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 ||
-		(PhySpecStat & PHY_M_PS_PAGE_REC) != 0)  {
-		/* Read PHY Next Page Link Partner */
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Page Received, NextPage: 0x%04X\n", Word));
-	}
-#endif /* DEBUG */
-
-	if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) {
-		return(SK_HW_PS_NONE);
-	}
-	
-	if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 ||
-		(PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) {
-		/* Downshift detected */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG);
-		
-		Para.Para64 = Port;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para);
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc));
-	}
-
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
-	
-	pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7);
-	
-	if (AutoNeg) {
-		/* Auto-Negotiation Over ? */
-		if ((PhyStat & PHY_ST_AN_OVER) != 0) {
-			
-			SkHWLinkUp(pAC, IoC, Port);
-			
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			
-			if (Done != SK_AND_OK) {
-				return(SK_HW_PS_RESTART);
-			}
-			
-			return(SK_HW_PS_LINK);
-		}
-	}
-	else {	/* !AutoNeg */
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync, Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpGmac */
-#endif /* YUKON */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- * SkGePortCheckUpLone() - Check if the link is up on Level One PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpLone(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	int			Done;
-	SK_U16		Isrc;		/* Interrupt source register */
-	SK_U16		LpAb;		/* Link Partner Ability */
-	SK_U16		ExtStat;	/* Extended Status Register */
-	SK_U16		PhyStat;	/* Phy Status Register */
-	SK_U16		StatSum;
-	SK_U8		NextMode;	/* Next AutoSensing Mode */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PHWLinkUp) {
-		return(SK_HW_PS_NONE);
-	}
-
-	StatSum = pPrt->PIsave;
-	pPrt->PIsave = 0;
-
-	/*
-	 * here we usually can check whether the link is in sync and
-	 * auto-negotiation is done.
-	 */
-	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat);
-	StatSum |= PhyStat;
-
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat);
-	
-	if ((PhyStat & PHY_ST_LSYNC) == 0) {
-		/* Save Auto-negotiation Done bit */
-		pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER);
-#ifdef DEBUG
-		if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("AutoNeg done rescheduled Port %d\n", Port));
-		}
-#endif /* DEBUG */
-		return(SK_HW_PS_NONE);
-	}
-
-	if (AutoNeg) {
-		if ((StatSum & PHY_ST_AN_OVER) != 0) {
-			SkHWLinkUp(pAC, IoC, Port);
-			Done = SkMacAutoNegDone(pAC, IoC, Port);
-			if (Done != SK_AND_OK) {
-				/* Get PHY parameters, for debugging only */
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb);
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
-					 Port, LpAb, ExtStat));
-					
-				/* Try next possible mode */
-				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
-				SkHWLinkDown(pAC, IoC, Port);
-				if (Done == SK_AND_DUP_CAP) {
-					/* GoTo next mode */
-					SkHWSenseSetNext(pAC, IoC, Port, NextMode);
-				}
-
-				return(SK_HW_PS_RESTART);
-
-			}
-			else {
-				/*
-				 * Dummy Read interrupt status to prevent
-				 * extra link down/ups
-				 */
-				SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
-				return(SK_HW_PS_LINK);
-			}
-		}
-		
-		/* AutoNeg not done, but HW link is up. Check for timeouts */
-		pPrt->PAutoNegTimeOut++;
-		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
-			/* Timeout occured */
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-				("AutoNeg timeout Port %d\n", Port));
-			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
-				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
-				/* Set Link manually up */
-				SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL);
-				SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-					("Set manual full duplex Port %d\n", Port));
-			}
-
-			/* Do the restart */
-			return(SK_HW_PS_RESTART);
-		}
-	}
-	else {
-		/* Link is up and we don't need more */
-#ifdef DEBUG
-		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-				("ERROR: Lipa auto detected on port %d\n", Port));
-		}
-#endif /* DEBUG */
-
-		/*
-		 * Dummy Read interrupt status to prevent
-		 * extra link down/ups
-		 */
-		SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat);
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("Link sync(GP), Port %d\n", Port));
-		SkHWLinkUp(pAC, IoC, Port);
-		
-		return(SK_HW_PS_LINK);
-	}
-
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpLone */
-
-
-/******************************************************************************
- *
- * SkGePortCheckUpNat() - Check if the link is up on National PHY
- *
- * return:
- *	0	o.k. nothing needed
- *	1	Restart needed on this port
- *	2	Link came up
- */
-static int SkGePortCheckUpNat(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO Context */
-int		Port,		/* Which port should be checked */
-SK_BOOL	AutoNeg)	/* Is Auto-negotiation used ? */
-{
-	/* todo: National */
-	return(SK_HW_PS_NONE);
-}	/* SkGePortCheckUpNat */
-#endif /* OTHER_PHY */
-
-
-/******************************************************************************
- *
- *	SkGeSirqEvent() - Event Service Routine
- *
- * Description:
- *
- * Notes:
- */
-int	SkGeSirqEvent(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-SK_U32		Event,		/* Module specific Event */
-SK_EVPARA	Para)		/* Event specific Parameter */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_U32		Port;
-	SK_U32		Val32;
-	int			PortStat;
-	SK_U8		Val8;
-#ifdef GENESIS
-	SK_U64		Octets;
-#endif /* GENESIS */
-
-	Port = Para.Para32[0];
-	pPrt = &pAC->GIni.GP[Port];
-
-	switch (Event) {
-	case SK_HWEV_WATIM:
-		if (pPrt->PState == SK_PRT_RESET) {
-		
-			PortStat = SK_HW_PS_NONE;
-		}
-		else {
-			/* Check whether port came up */
-			PortStat = SkGePortCheckUp(pAC, IoC, (int)Port);
-		}
-
-		switch (PortStat) {
-		case SK_HW_PS_RESTART:
-			if (pPrt->PHWLinkUp) {
-				/* Set Link to down */
-				SkHWLinkDown(pAC, IoC, (int)Port);
-
-				/*
-				 * Signal directly to RLMT to ensure correct
-				 * sequence of SWITCH and RESET event.
-				 */
-				SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-			}
-
-			/* Restart needed */
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
-			break;
-
-		case SK_HW_PS_LINK:
-			/* Signal to RLMT */
-			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para);
-			break;
-		}
-		
-		/* Start again the check Timer */
-		if (pPrt->PHWLinkUp) {
-			Val32 = SK_WA_ACT_TIME;
-		}
-		else {
-			Val32 = SK_WA_INA_TIME;
-		}
-
-		/* Todo: still needed for non-XMAC PHYs??? */
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-		break;
-
-	case SK_HWEV_PORT_START:
-		if (pPrt->PHWLinkUp) {
-			/*
-			 * Signal directly to RLMT to ensure correct
-			 * sequence of SWITCH and RESET event.
-			 */
-			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-		}
-
-		SkHWLinkDown(pAC, IoC, (int)Port);
-
-		/* Schedule Port RESET */
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
-
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-		break;
-
-	case SK_HWEV_PORT_STOP:
-		if (pPrt->PHWLinkUp) {
-			/*
-			 * Signal directly to RLMT to ensure correct
-			 * sequence of SWITCH and RESET event.
-			 */
-			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
-		}
-
-		/* Stop Workaround Timer */
-		SkTimerStop(pAC, IoC, &pPrt->PWaTimer);
-
-		SkHWLinkDown(pAC, IoC, (int)Port);
-		break;
-
-	case SK_HWEV_UPDATE_STAT:
-		/* We do NOT need to update any statistics */
-		break;
-
-	case SK_HWEV_CLEAR_STAT:
-		/* We do NOT need to clear any statistics */
-		for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) {
-			pPrt->PPrevRx = 0;
-			pPrt->PPrevFcs = 0;
-			pPrt->PPrevShorts = 0;
-		}
-		break;
-
-	case SK_HWEV_SET_LMODE:
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PLinkModeConf != Val8) {
-			/* Set New link mode */
-			pPrt->PLinkModeConf = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_FLOWMODE:
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PFlowCtrlMode != Val8) {
-			/* Set New Flow Control mode */
-			pPrt->PFlowCtrlMode = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_ROLE:
-		/* not possible for fiber */
-		if (!pAC->GIni.GICopperType) {
-			break;
-		}
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PMSMode != Val8) {
-			/* Set New Role (Master/Slave) mode */
-			pPrt->PMSMode = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-	case SK_HWEV_SET_SPEED:
-		if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
-			break;
-		}
-		Val8 = (SK_U8)Para.Para32[1];
-		if (pPrt->PLinkSpeed != Val8) {
-			/* Set New Speed parameter */
-			pPrt->PLinkSpeed = Val8;
-
-			/* Restart Port */
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-		}
-		break;
-
-#ifdef GENESIS
-	case SK_HWEV_HALFDUP_CHK:
-		if (pAC->GIni.GIGenesis) {
-			/*
-			 * half duplex hangup workaround.
-			 * See packet arbiter timeout interrupt for description
-			 */
-			pPrt->HalfDupTimerActive = SK_FALSE;
-			if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF ||
-				pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) {
-				/* Snap statistic counters */
-				(void)SkXmUpdateStats(pAC, IoC, Port);
-
-				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32);
-
-				Octets = (SK_U64)Val32 << 32;
-				
-				(void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32);
-
-				Octets += Val32;
-				
-				if (pPrt->LastOctets == Octets) {
-					/* Tx hanging, a FIFO flush restarts it */
-					SkMacFlushTxFifo(pAC, IoC, Port);
-				}
-			}
-		}
-		break;
-#endif /* GENESIS */
-	
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG);
-		break;
-	}
-
-	return(0);
-}	/* SkGeSirqEvent */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkPhyIsrBcom() - PHY interrupt service routine
- *
- * Description: handles all interrupts from BCom PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrBcom(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-int			Port,		/* Port Num = PHY Num */
-SK_U16		IStatus)	/* Interrupt Status */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_EVPARA	Para;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((IStatus & PHY_B_IS_PSE) != 0) {
-		/* Incorrectable pair swap error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022,
-			SKERR_SIRQ_E022MSG);
-	}
-	
-	if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) {
-
-		SkHWLinkDown(pAC, IoC, Port);
-
-		Para.Para32[0] = (SK_U32)Port;
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-	}
-
-}	/* SkPhyIsrBcom */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkPhyIsrGmac() - PHY interrupt service routine
- *
- * Description: handles all interrupts from Marvell PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrGmac(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* Io Context */
-int			Port,		/* Port Num = PHY Num */
-SK_U16		IStatus)	/* Interrupt Status */
-{
-	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
-	SK_EVPARA	Para;
-	SK_U16		Word;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) {
-
-		SkHWLinkDown(pAC, IoC, Port);
-
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNeg.Adv: 0x%04X\n", Word));
-		
-		/* Set Auto-negotiation advertisement */
-		if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) {
-			/* restore Asymmetric Pause bit */
-			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV,
-				(SK_U16)(Word | PHY_M_AN_ASP));
-		}
-		
-		Para.Para32[0] = (SK_U32)Port;
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-	
-	if ((IStatus & PHY_M_IS_AN_ERROR) != 0) {
-		/* Auto-Negotiation Error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG);
-	}
-	
-	if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) {
-		/* FIFO Overflow/Underrun Error */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG);
-	}
-	
-}	/* SkPhyIsrGmac */
-#endif /* YUKON */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- *	SkPhyIsrLone() - PHY interrupt service routine
- *
- * Description: handles all interrupts from LONE PHY
- *
- * Returns: N/A
- */
-static void SkPhyIsrLone(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* Io Context */
-int		Port,		/* Port Num = PHY Num */
-SK_U16	IStatus)	/* Interrupt Status */
-{
-	SK_EVPARA	Para;
-
-	if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) {
-		
-		SkHWLinkDown(pAC, IoC, Port);
-
-		Para.Para32[0] = (SK_U32)Port;
-		/* Signal to RLMT */
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-	}
-
-}	/* SkPhyIsrLone */
-#endif /* OTHER_PHY */
-
-/* End of File */
diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c
deleted file mode 100644
index 79bf57cb5326..000000000000
--- a/drivers/net/sk98lin/ski2c.c
+++ /dev/null
@@ -1,1296 +0,0 @@
-/******************************************************************************
- *
- * Name:	ski2c.c
- * Project:	Gigabit Ethernet Adapters, TWSI-Module
- * Version:	$Revision: 1.59 $
- * Date:	$Date: 2003/10/20 09:07:25 $
- * Purpose:	Functions to access Voltage and Temperature Sensor
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- *	I2C Protocol
- */
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: ski2c.c,v 1.59 2003/10/20 09:07:25 rschmidt Exp $ (C) Marvell. ";
-#endif
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#include "h/lm80.h"
-#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
-
-#ifdef __C2MAN__
-/*
-	I2C protocol implementation.
-
-	General Description:
-
-	The I2C protocol is used for the temperature sensors and for
-	the serial EEPROM which hold the configuration.
-
-	This file covers functions that allow to read write and do
-	some bulk requests a specified I2C address.
-
-	The Genesis has 2 I2C buses. One for the EEPROM which holds
-	the VPD Data and one for temperature and voltage sensor.
-	The following picture shows the I2C buses, I2C devices and
-	their control registers.
-
-	Note: The VPD functions are in skvpd.c
-.
-.	PCI Config I2C Bus for VPD Data:
-.
-.		      +------------+
-.		      | VPD EEPROM |
-.		      +------------+
-.			     |
-.			     | <-- I2C
-.			     |
-.		 +-----------+-----------+
-.		 |			 |
-.	+-----------------+	+-----------------+
-.	| PCI_VPD_ADR_REG |	| PCI_VPD_DAT_REG |
-.	+-----------------+	+-----------------+
-.
-.
-.	I2C Bus for LM80 sensor:
-.
-.			+-----------------+
-.			| Temperature and |
-.			| Voltage Sensor  |
-.			| 	LM80	  |
-.			+-----------------+
-.				|
-.				|
-.			I2C --> |
-.				|
-.			     +----+
-.	     +-------------->| OR |<--+
-.	     |		     +----+   |
-.     +------+------+		      |
-.     |		    |		      |
-. +--------+	+--------+	+----------+
-. | B2_I2C |	| B2_I2C |	|  B2_I2C  |
-. | _CTRL  |	| _DATA  |	|   _SW    |
-. +--------+	+--------+	+----------+
-.
-	The I2C bus may be driven by the B2_I2C_SW or by the B2_I2C_CTRL
-	and B2_I2C_DATA registers.
-	For driver software it is recommended to use the I2C control and
-	data register, because I2C bus timing is done by the ASIC and
-	an interrupt may be received when the I2C request is completed.
-
-	Clock Rate Timing:			MIN	MAX	generated by
-		VPD EEPROM:			50 kHz	100 kHz		HW
-		LM80 over I2C Ctrl/Data reg.	50 kHz	100 kHz		HW
-		LM80 over B2_I2C_SW register	0	400 kHz		SW
-
-	Note:	The clock generated by the hardware is dependend on the
-		PCI clock. If the PCI bus clock is 33 MHz, the I2C/VPD
-		clock is 50 kHz.
- */
-intro()
-{}
-#endif
-
-#ifdef SK_DIAG
-/*
- * I2C Fast Mode timing values used by the LM80.
- * If new devices are added to the I2C bus the timing values have to be checked.
- */
-#ifndef I2C_SLOW_TIMING
-#define	T_CLK_LOW			1300L	/* clock low time in ns */
-#define	T_CLK_HIGH		 	 600L	/* clock high time in ns */
-#define T_DATA_IN_SETUP		 100L	/* data in Set-up Time */
-#define T_START_HOLD		 600L	/* start condition hold time */
-#define T_START_SETUP		 600L	/* start condition Set-up time */
-#define	T_STOP_SETUP		 600L	/* stop condition Set-up time */
-#define T_BUS_IDLE			1300L	/* time the bus must free after Tx */
-#define	T_CLK_2_DATA_OUT	 900L	/* max. clock low to data output valid */
-#else	/* I2C_SLOW_TIMING */
-/* I2C Standard Mode Timing */
-#define	T_CLK_LOW			4700L	/* clock low time in ns */
-#define	T_CLK_HIGH			4000L	/* clock high time in ns */
-#define T_DATA_IN_SETUP		 250L	/* data in Set-up Time */
-#define T_START_HOLD		4000L	/* start condition hold time */
-#define T_START_SETUP		4700L	/* start condition Set-up time */
-#define	T_STOP_SETUP		4000L	/* stop condition Set-up time */
-#define T_BUS_IDLE			4700L	/* time the bus must free after Tx */
-#endif	/* !I2C_SLOW_TIMING */
-
-#define NS2BCLK(x)	(((x)*125)/10000)
-
-/*
- * I2C Wire Operations
- *
- * About I2C_CLK_LOW():
- *
- * The Data Direction bit (I2C_DATA_DIR) has to be set to input when setting
- * clock to low, to prevent the ASIC and the I2C data client from driving the
- * serial data line simultaneously (ASIC: last bit of a byte = '1', I2C client
- * send an 'ACK'). See also Concentrator Bugreport No. 10192.
- */
-#define I2C_DATA_HIGH(IoC)	SK_I2C_SET_BIT(IoC, I2C_DATA)
-#define	I2C_DATA_LOW(IoC)	SK_I2C_CLR_BIT(IoC, I2C_DATA)
-#define	I2C_DATA_OUT(IoC)	SK_I2C_SET_BIT(IoC, I2C_DATA_DIR)
-#define	I2C_DATA_IN(IoC)	SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA)
-#define	I2C_CLK_HIGH(IoC)	SK_I2C_SET_BIT(IoC, I2C_CLK)
-#define	I2C_CLK_LOW(IoC)	SK_I2C_CLR_BIT(IoC, I2C_CLK | I2C_DATA_DIR)
-#define	I2C_START_COND(IoC)	SK_I2C_CLR_BIT(IoC, I2C_CLK)
-
-#define NS2CLKT(x)	((x*125L)/10000)
-
-/*--------------- I2C Interface Register Functions --------------- */
-
-/*
- * sending one bit
- */
-void SkI2cSndBit(
-SK_IOC	IoC,	/* I/O Context */
-SK_U8	Bit)	/* Bit to send */
-{
-	I2C_DATA_OUT(IoC);
-	if (Bit) {
-		I2C_DATA_HIGH(IoC);
-	}
-	else {
-		I2C_DATA_LOW(IoC);
-	}
-	SkDgWaitTime(IoC, NS2BCLK(T_DATA_IN_SETUP));
-	I2C_CLK_HIGH(IoC);
-	SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH));
-	I2C_CLK_LOW(IoC);
-}	/* SkI2cSndBit*/
-
-
-/*
- * Signal a start to the I2C Bus.
- *
- * A start is signaled when data goes to low in a high clock cycle.
- *
- * Ends with Clock Low.
- *
- * Status: not tested
- */
-void SkI2cStart(
-SK_IOC	IoC)	/* I/O Context */
-{
-	/* Init data and Clock to output lines */
-	/* Set Data high */
-	I2C_DATA_OUT(IoC);
-	I2C_DATA_HIGH(IoC);
-	/* Set Clock high */
-	I2C_CLK_HIGH(IoC);
-
-	SkDgWaitTime(IoC, NS2BCLK(T_START_SETUP));
-
-	/* Set Data Low */
-	I2C_DATA_LOW(IoC);
-
-	SkDgWaitTime(IoC, NS2BCLK(T_START_HOLD));
-
-	/* Clock low without Data to Input */
-	I2C_START_COND(IoC);
-
-	SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW));
-}	/* SkI2cStart */
-
-
-void SkI2cStop(
-SK_IOC	IoC)	/* I/O Context */
-{
-	/* Init data and Clock to output lines */
-	/* Set Data low */
-	I2C_DATA_OUT(IoC);
-	I2C_DATA_LOW(IoC);
-
-	SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT));
-
-	/* Set Clock high */
-	I2C_CLK_HIGH(IoC);
-
-	SkDgWaitTime(IoC, NS2BCLK(T_STOP_SETUP));
-
-	/*
-	 * Set Data High:	Do it by setting the Data Line to Input.
-	 *			Because of a pull up resistor the Data Line
-	 *			floods to high.
-	 */
-	I2C_DATA_IN(IoC);
-
-	/*
-	 *	When I2C activity is stopped
-	 *	 o	DATA should be set to input and
-	 *	 o	CLOCK should be set to high!
-	 */
-	SkDgWaitTime(IoC, NS2BCLK(T_BUS_IDLE));
-}	/* SkI2cStop */
-
-
-/*
- * Receive just one bit via the I2C bus.
- *
- * Note:	Clock must be set to LOW before calling this function.
- *
- * Returns The received bit.
- */
-int SkI2cRcvBit(
-SK_IOC	IoC)	/* I/O Context */
-{
-	int	Bit;
-	SK_U8	I2cSwCtrl;
-
-	/* Init data as input line */
-	I2C_DATA_IN(IoC);
-
-	SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT));
-
-	I2C_CLK_HIGH(IoC);
-
-	SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH));
-
-	SK_I2C_GET_SW(IoC, &I2cSwCtrl);
-	
-	Bit = (I2cSwCtrl & I2C_DATA) ? 1 : 0;
-
-	I2C_CLK_LOW(IoC);
-	SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW-T_CLK_2_DATA_OUT));
-
-	return(Bit);
-}	/* SkI2cRcvBit */
-
-
-/*
- * Receive an ACK.
- *
- * returns	0 If acknowledged
- *		1 in case of an error
- */
-int SkI2cRcvAck(
-SK_IOC	IoC)	/* I/O Context */
-{
-	/*
-	 * Received bit must be zero.
-	 */
-	return(SkI2cRcvBit(IoC) != 0);
-}	/* SkI2cRcvAck */
-
-
-/*
- * Send an NACK.
- */
-void SkI2cSndNAck(
-SK_IOC	IoC)	/* I/O Context */
-{
-	/*
-	 * Received bit must be zero.
-	 */
-	SkI2cSndBit(IoC, 1);
-}	/* SkI2cSndNAck */
-
-
-/*
- * Send an ACK.
- */
-void SkI2cSndAck(
-SK_IOC IoC)	/* I/O Context */
-{
-	/*
-	 * Received bit must be zero.
-	 */
-	SkI2cSndBit(IoC, 0);
-}	/* SkI2cSndAck */
-
-
-/*
- * Send one byte to the I2C device and wait for ACK.
- *
- * Return acknowleged status.
- */
-int SkI2cSndByte(
-SK_IOC	IoC,	/* I/O Context */
-int		Byte)	/* byte to send */
-{
-	int	i;
-
-	for (i = 0; i < 8; i++) {
-		if (Byte & (1<<(7-i))) {
-			SkI2cSndBit(IoC, 1);
-		}
-		else {
-			SkI2cSndBit(IoC, 0);
-		}
-	}
-
-	return(SkI2cRcvAck(IoC));
-}	/* SkI2cSndByte */
-
-
-/*
- * Receive one byte and ack it.
- *
- * Return byte.
- */
-int SkI2cRcvByte(
-SK_IOC	IoC,	/* I/O Context */
-int		Last)	/* Last Byte Flag */
-{
-	int	i;
-	int	Byte = 0;
-
-	for (i = 0; i < 8; i++) {
-		Byte <<= 1;
-		Byte |= SkI2cRcvBit(IoC);
-	}
-
-	if (Last) {
-		SkI2cSndNAck(IoC);
-	}
-	else {
-		SkI2cSndAck(IoC);
-	}
-
-	return(Byte);
-}	/* SkI2cRcvByte */
-
-
-/*
- * Start dialog and send device address
- *
- * Return 0 if acknowleged, 1 in case of an error
- */
-int	SkI2cSndDev(
-SK_IOC	IoC,	/* I/O Context */
-int		Addr,	/* Device Address */
-int		Rw)		/* Read / Write Flag */
-{
-	SkI2cStart(IoC);
-	Rw = ~Rw;
-	Rw &= I2C_WRITE;
-	return(SkI2cSndByte(IoC, (Addr<<1) | Rw));
-}	/* SkI2cSndDev */
-
-#endif /* SK_DIAG */
-
-/*----------------- I2C CTRL Register Functions ----------*/
-
-/*
- * waits for a completion of an I2C transfer
- *
- * returns	0:	success, transfer completes
- *			1:	error,	 transfer does not complete, I2C transfer
- *						 killed, wait loop terminated.
- */
-static int	SkI2cWait(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* I/O Context */
-int		Event)	/* complete event to wait for (I2C_READ or I2C_WRITE) */
-{
-	SK_U64	StartTime;
-	SK_U64	CurrentTime;
-	SK_U32	I2cCtrl;
-
-	StartTime = SkOsGetTime(pAC);
-	
-	do {
-		CurrentTime = SkOsGetTime(pAC);
-
-		if (CurrentTime - StartTime > SK_TICKS_PER_SEC / 8) {
-			
-			SK_I2C_STOP(IoC);
-#ifndef SK_DIAG
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E002, SKERR_I2C_E002MSG);
-#endif /* !SK_DIAG */
-			return(1);
-		}
-		
-		SK_I2C_GET_CTL(IoC, &I2cCtrl);
-
-#ifdef xYUKON_DBG
-		printf("StartTime=%lu, CurrentTime=%lu\n",
-			StartTime, CurrentTime);
-		if (kbhit()) {
-			return(1);
-		}
-#endif /* YUKON_DBG */
-	
-	} while ((I2cCtrl & I2C_FLAG) == (SK_U32)Event << 31);
-
-	return(0);
-}	/* SkI2cWait */
-
-
-/*
- * waits for a completion of an I2C transfer
- *
- * Returns
- *	Nothing
- */
-void SkI2cWaitIrq(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC)	/* I/O Context */
-{
-	SK_SENSOR	*pSen;
-	SK_U64		StartTime;
-	SK_U32		IrqSrc;
-
-	pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
-
-	if (pSen->SenState == SK_SEN_IDLE) {
-		return;
-	}
-
-	StartTime = SkOsGetTime(pAC);
-	
-	do {
-		if (SkOsGetTime(pAC) - StartTime > SK_TICKS_PER_SEC / 8) {
-			
-			SK_I2C_STOP(IoC);
-#ifndef SK_DIAG
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E016, SKERR_I2C_E016MSG);
-#endif /* !SK_DIAG */
-			return;
-		}
-		
-		SK_IN32(IoC, B0_ISRC, &IrqSrc);
-
-	} while ((IrqSrc & IS_I2C_READY) == 0);
-
-	pSen->SenState = SK_SEN_IDLE;
-	return;
-}	/* SkI2cWaitIrq */
-
-/*
- * writes a single byte or 4 bytes into the I2C device
- *
- * returns	0:	success
- *			1:	error
- */
-static int SkI2cWrite(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-SK_U32	I2cData,	/* I2C Data to write */
-int		I2cDev,		/* I2C Device Address */
-int		I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */
-int		I2cReg,		/* I2C Device Register Address */
-int		I2cBurst)	/* I2C Burst Flag */
-{
-	SK_OUT32(IoC, B2_I2C_DATA, I2cData);
-	
-	SK_I2C_CTL(IoC, I2C_WRITE, I2cDev, I2cDevSize, I2cReg, I2cBurst);
-	
-	return(SkI2cWait(pAC, IoC, I2C_WRITE));
-}	/* SkI2cWrite*/
-
-
-#ifdef	SK_DIAG
-/*
- * reads a single byte or 4 bytes from the I2C device
- *
- * returns	the word read
- */
-SK_U32 SkI2cRead(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-int		I2cDev,		/* I2C Device Address */
-int		I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */
-int		I2cReg,		/* I2C Device Register Address */
-int		I2cBurst)	/* I2C Burst Flag */
-{
-	SK_U32	Data;
-
-	SK_OUT32(IoC, B2_I2C_DATA, 0);
-	SK_I2C_CTL(IoC, I2C_READ, I2cDev, I2cDevSize, I2cReg, I2cBurst);
-	
-	if (SkI2cWait(pAC, IoC, I2C_READ) != 0) {
-		w_print("%s\n", SKERR_I2C_E002MSG);
-	}
-	
-	SK_IN32(IoC, B2_I2C_DATA, &Data);
-	
-	return(Data);
-}	/* SkI2cRead */
-#endif /* SK_DIAG */
-
-
-/*
- * read a sensor's value
- *
- * This function reads a sensor's value from the I2C sensor chip. The sensor
- * is defined by its index into the sensors database in the struct pAC points
- * to.
- * Returns
- *		1 if the read is completed
- *		0 if the read must be continued (I2C Bus still allocated)
- */
-static int	SkI2cReadSensor(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_SENSOR	*pSen)	/* Sensor to be read */
-{
-    if (pSen->SenRead != NULL) {
-        return((*pSen->SenRead)(pAC, IoC, pSen));
-    }
-	else {
-        return(0); /* no success */
-	}
-}	/* SkI2cReadSensor */
-
-/*
- * Do the Init state 0 initialization
- */
-static int SkI2cInit0(
-SK_AC	*pAC)	/* Adapter Context */
-{
-	int	i;
-
-	/* Begin with first sensor */
-	pAC->I2c.CurrSens = 0;
-	
-	/* Begin with timeout control for state machine */
-	pAC->I2c.TimerMode = SK_TIMER_WATCH_SM;
-	
-	/* Set sensor number to zero */
-	pAC->I2c.MaxSens = 0;
-
-#ifndef SK_DIAG
-	/* Initialize Number of Dummy Reads */
-	pAC->I2c.DummyReads = SK_MAX_SENSORS;
-#endif
-
-	for (i = 0; i < SK_MAX_SENSORS; i++) {
-		pAC->I2c.SenTable[i].SenDesc = "unknown";
-		pAC->I2c.SenTable[i].SenType = SK_SEN_UNKNOWN;
-		pAC->I2c.SenTable[i].SenThreErrHigh = 0;
-		pAC->I2c.SenTable[i].SenThreErrLow = 0;
-		pAC->I2c.SenTable[i].SenThreWarnHigh = 0;
-		pAC->I2c.SenTable[i].SenThreWarnLow = 0;
-		pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN;
-		pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_NONE;
-		pAC->I2c.SenTable[i].SenValue = 0;
-		pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_NOT_PRESENT;
-		pAC->I2c.SenTable[i].SenErrCts = 0;
-		pAC->I2c.SenTable[i].SenBegErrTS = 0;
-		pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE;
-		pAC->I2c.SenTable[i].SenRead = NULL;
-		pAC->I2c.SenTable[i].SenDev = 0;
-	}
-
-	/* Now we are "INIT data"ed */
-	pAC->I2c.InitLevel = SK_INIT_DATA;
-	return(0);
-}	/* SkI2cInit0*/
-
-
-/*
- * Do the init state 1 initialization
- *
- * initialize the following register of the LM80:
- * Configuration register:
- * - START, noINT, activeLOW, noINT#Clear, noRESET, noCI, noGPO#, noINIT
- *
- * Interrupt Mask Register 1:
- * - all interrupts are Disabled (0xff)
- *
- * Interrupt Mask Register 2:
- * - all interrupts are Disabled (0xff) Interrupt modi doesn't matter.
- *
- * Fan Divisor/RST_OUT register:
- * - Divisors set to 1 (bits 00), all others 0s.
- *
- * OS# Configuration/Temperature resolution Register:
- * - all 0s
- *
- */
-static int SkI2cInit1(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC)	/* I/O Context */
-{
-    int i;
-    SK_U8 I2cSwCtrl;
-	SK_GEPORT *pPrt;	/* GIni Port struct pointer */
-
-	if (pAC->I2c.InitLevel != SK_INIT_DATA) {
-		/* ReInit not needed in I2C module */
-		return(0);
-	}
-
-    /* Set the Direction of I2C-Data Pin to IN */
-    SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA);
-    /* Check for 32-Bit Yukon with Low at I2C-Data Pin */
-	SK_I2C_GET_SW(IoC, &I2cSwCtrl);
-
-	if ((I2cSwCtrl & I2C_DATA) == 0) {
-		/* this is a 32-Bit board */
-		pAC->GIni.GIYukon32Bit = SK_TRUE;
-        return(0);
-    }
-
-	/* Check for 64 Bit Yukon without sensors */
-	if (SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_CFG, 0) != 0) {
-        return(0);
-    }
-
-	(void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_1, 0);
-	
-	(void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_2, 0);
-	
-	(void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_FAN_CTRL, 0);
-	
-	(void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_TEMP_CTRL, 0);
-	
-	(void)SkI2cWrite(pAC, IoC, (SK_U32)LM80_CFG_START, LM80_ADDR, I2C_025K_DEV,
-		LM80_CFG, 0);
-	
-	/*
-	 * MaxSens has to be updated here, because PhyType is not
-	 * set when performing Init Level 0
-	 */
-    pAC->I2c.MaxSens = 5;
-	
-	pPrt = &pAC->GIni.GP[0];
-	
-	if (pAC->GIni.GIGenesis) {
-		if (pPrt->PhyType == SK_PHY_BCOM) {
-			if (pAC->GIni.GIMacsFound == 1) {
-				pAC->I2c.MaxSens += 1;
-			}
-			else {
-				pAC->I2c.MaxSens += 3;
-			}
-		}
-	}
-	else {
-		pAC->I2c.MaxSens += 3;
-	}
-	
-	for (i = 0; i < pAC->I2c.MaxSens; i++) {
-		switch (i) {
-		case 0:
-			pAC->I2c.SenTable[i].SenDesc = "Temperature";
-			pAC->I2c.SenTable[i].SenType = SK_SEN_TEMP;
-			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_TEMP_HIGH_ERR;
-			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_TEMP_HIGH_WARN;
-			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_TEMP_LOW_WARN;
-			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_TEMP_LOW_ERR;
-			pAC->I2c.SenTable[i].SenReg = LM80_TEMP_IN;
-			break;
-		case 1:
-			pAC->I2c.SenTable[i].SenDesc = "Voltage PCI";
-			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
-			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_5V_HIGH_ERR;
-			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_5V_HIGH_WARN;
-			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_5V_LOW_WARN;
-			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_5V_LOW_ERR;
-			pAC->I2c.SenTable[i].SenReg = LM80_VT0_IN;
-			break;
-		case 2:
-			pAC->I2c.SenTable[i].SenDesc = "Voltage PCI-IO";
-			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
-			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_IO_5V_HIGH_ERR;
-			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_IO_5V_HIGH_WARN;
-			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_IO_3V3_LOW_WARN;
-			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_IO_3V3_LOW_ERR;
-			pAC->I2c.SenTable[i].SenReg = LM80_VT1_IN;
-			pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_PCI_IO;
-			break;
-		case 3:
-			pAC->I2c.SenTable[i].SenDesc = "Voltage ASIC";
-			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
-			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VDD_HIGH_ERR;
-			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VDD_HIGH_WARN;
-			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VDD_LOW_WARN;
-			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VDD_LOW_ERR;
-			pAC->I2c.SenTable[i].SenReg = LM80_VT2_IN;
-			break;
-		case 4:
-			if (pAC->GIni.GIGenesis) {
-				if (pPrt->PhyType == SK_PHY_BCOM) {
-					pAC->I2c.SenTable[i].SenDesc = "Voltage PHY A PLL";
-					pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
-					pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
-					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
-					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
-				}
-				else {
-					pAC->I2c.SenTable[i].SenDesc = "Voltage PMA";
-					pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
-					pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
-					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
-					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
-				}
-			}
-			else {
-				pAC->I2c.SenTable[i].SenDesc = "Voltage VAUX";
-				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VAUX_3V3_HIGH_ERR;
-				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VAUX_3V3_HIGH_WARN;
-				if (pAC->GIni.GIVauxAvail) {
-					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN;
-					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR;
-				}
-				else {
-					pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_0V_WARN_ERR;
-					pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_0V_WARN_ERR;
-				}
-			}
-			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
-			pAC->I2c.SenTable[i].SenReg = LM80_VT3_IN;
-			break;
-		case 5:
-			if (pAC->GIni.GIGenesis) {
-				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5";
-				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR;
-				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN;
-				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN;
-				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR;
-			}
-			else {
-				pAC->I2c.SenTable[i].SenDesc = "Voltage Core 1V5";
-				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_CORE_1V5_HIGH_ERR;
-				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_CORE_1V5_HIGH_WARN;
-				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_CORE_1V5_LOW_WARN;
-				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_CORE_1V5_LOW_ERR;
-			}
-			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
-			pAC->I2c.SenTable[i].SenReg = LM80_VT4_IN;
-			break;
-		case 6:
-			if (pAC->GIni.GIGenesis) {
-				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY B PLL";
-			}
-			else {
-				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 3V3";
-			}
-			pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
-			pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR;
-			pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN;
-			pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN;
-			pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR;
-			pAC->I2c.SenTable[i].SenReg = LM80_VT5_IN;
-			break;
-		case 7:
-			if (pAC->GIni.GIGenesis) {
-				pAC->I2c.SenTable[i].SenDesc = "Speed Fan";
-				pAC->I2c.SenTable[i].SenType = SK_SEN_FAN;
-				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_FAN_HIGH_ERR;
-				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_FAN_HIGH_WARN;
-				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_FAN_LOW_WARN;
-				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_FAN_LOW_ERR;
-				pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN;
-			}
-			else {
-				pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5";
-				pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT;
-				pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR;
-				pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN;
-				pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN;
-				pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR;
-				pAC->I2c.SenTable[i].SenReg = LM80_VT6_IN;
-			}
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_INIT | SK_ERRCL_SW,
-				SKERR_I2C_E001, SKERR_I2C_E001MSG);
-			break;
-		}
-
-		pAC->I2c.SenTable[i].SenValue = 0;
-		pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK;
-		pAC->I2c.SenTable[i].SenErrCts = 0;
-		pAC->I2c.SenTable[i].SenBegErrTS = 0;
-		pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE;
-		pAC->I2c.SenTable[i].SenRead = SkLm80ReadSensor;
-		pAC->I2c.SenTable[i].SenDev = LM80_ADDR;
-	}
-
-#ifndef SK_DIAG
-	pAC->I2c.DummyReads = pAC->I2c.MaxSens;
-#endif /* !SK_DIAG */
-	
-	/* Clear I2C IRQ */
-	SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
-	
-	/* Now we are I/O initialized */
-	pAC->I2c.InitLevel = SK_INIT_IO;
-	return(0);
-}	/* SkI2cInit1 */
-
-
-/*
- * Init level 2: Start first sensor read.
- */
-static int SkI2cInit2(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC)	/* I/O Context */
-{
-	int		ReadComplete;
-	SK_SENSOR	*pSen;
-
-	if (pAC->I2c.InitLevel != SK_INIT_IO) {
-		/* ReInit not needed in I2C module */
-		/* Init0 and Init2 not permitted */
-		return(0);
-	}
-
-	pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
-	ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
-
-	if (ReadComplete) {
-		SK_ERR_LOG(pAC, SK_ERRCL_INIT, SKERR_I2C_E008, SKERR_I2C_E008MSG);
-	}
-
-	/* Now we are correctly initialized */
-	pAC->I2c.InitLevel = SK_INIT_RUN;
-
-	return(0);
-}	/* SkI2cInit2*/
-
-
-/*
- * Initialize I2C devices
- *
- * Get the first voltage value and discard it.
- * Go into temperature read mode. A default pointer is not set.
- *
- * The things to be done depend on the init level in the parameter list:
- * Level 0:
- *	Initialize only the data structures. Do NOT access hardware.
- * Level 1:
- *	Initialize hardware through SK_IN / SK_OUT commands. Do NOT use interrupts.
- * Level 2:
- *	Everything is possible. Interrupts may be used from now on.
- *
- * return:
- *	0 = success
- *	other = error.
- */
-int	SkI2cInit(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* I/O Context needed in levels 1 and 2 */
-int		Level)	/* Init Level */
-{
-
-	switch (Level) {
-	case SK_INIT_DATA:
-		return(SkI2cInit0(pAC));
-	case SK_INIT_IO:
-		return(SkI2cInit1(pAC, IoC));
-	case SK_INIT_RUN:
-		return(SkI2cInit2(pAC, IoC));
-	default:
-		break;
-	}
-
-	return(0);
-}	/* SkI2cInit */
-
-
-#ifndef SK_DIAG
-
-/*
- * Interrupt service function for the I2C Interface
- *
- * Clears the Interrupt source
- *
- * Reads the register and check it for sending a trap.
- *
- * Starts the timer if necessary.
- */
-void SkI2cIsr(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC)	/* I/O Context */
-{
-	SK_EVPARA	Para;
-
-	/* Clear I2C IRQ */
-	SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ);
-
-	Para.Para64 = 0;
-	SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_IRQ, Para);
-}	/* SkI2cIsr */
-
-
-/*
- * Check this sensors Value against the threshold and send events.
- */
-static void SkI2cCheckSensor(
-SK_AC		*pAC,	/* Adapter Context */
-SK_SENSOR	*pSen)
-{
-	SK_EVPARA	ParaLocal;
-	SK_BOOL		TooHigh;	/* Is sensor too high? */
-	SK_BOOL		TooLow;		/* Is sensor too low? */
-	SK_U64		CurrTime;	/* Current Time */
-	SK_BOOL		DoTrapSend;	/* We need to send a trap */
-	SK_BOOL		DoErrLog;	/* We need to log the error */
-	SK_BOOL		IsError;	/* We need to log the error */
-
-	/* Check Dummy Reads first */
-	if (pAC->I2c.DummyReads > 0) {
-		pAC->I2c.DummyReads--;
-		return;
-	}
-
-	/* Get the current time */
-	CurrTime = SkOsGetTime(pAC);
-
-	/* Set para to the most useful setting: The current sensor. */
-	ParaLocal.Para64 = (SK_U64)pAC->I2c.CurrSens;
-
-	/* Check the Value against the thresholds. First: Error Thresholds */
-	TooHigh = (pSen->SenValue > pSen->SenThreErrHigh);
-	TooLow = (pSen->SenValue < pSen->SenThreErrLow);
-		
-	IsError = SK_FALSE;
-	if (TooHigh || TooLow) {
-		/* Error condition is satisfied */
-		DoTrapSend = SK_TRUE;
-		DoErrLog = SK_TRUE;
-
-		/* Now error condition is satisfied */
-		IsError = SK_TRUE;
-
-		if (pSen->SenErrFlag == SK_SEN_ERR_ERR) {
-			/* This state is the former one */
-
-			/* So check first whether we have to send a trap */
-			if (pSen->SenLastErrTrapTS + SK_SEN_ERR_TR_HOLD >
-			    CurrTime) {
-				/*
-				 * Do NOT send the Trap. The hold back time
-				 * has to run out first.
-				 */
-				DoTrapSend = SK_FALSE;
-			}
-
-			/* Check now whether we have to log an Error */
-			if (pSen->SenLastErrLogTS + SK_SEN_ERR_LOG_HOLD >
-			    CurrTime) {
-				/*
-				 * Do NOT log the error. The hold back time
-				 * has to run out first.
-				 */
-				DoErrLog = SK_FALSE;
-			}
-		}
-		else {
-			/* We came from a different state -> Set Begin Time Stamp */
-			pSen->SenBegErrTS = CurrTime;
-			pSen->SenErrFlag = SK_SEN_ERR_ERR;
-		}
-
-		if (DoTrapSend) {
-			/* Set current Time */
-			pSen->SenLastErrTrapTS = CurrTime;
-			pSen->SenErrCts++;
-
-			/* Queue PNMI Event */
-			SkEventQueue(pAC, SKGE_PNMI, (TooHigh ?
-				SK_PNMI_EVT_SEN_ERR_UPP :
-				SK_PNMI_EVT_SEN_ERR_LOW),
-				ParaLocal);
-		}
-
-		if (DoErrLog) {
-			/* Set current Time */
-			pSen->SenLastErrLogTS = CurrTime;
-
-			if (pSen->SenType == SK_SEN_TEMP) {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E011, SKERR_I2C_E011MSG);
-			}
-			else if (pSen->SenType == SK_SEN_VOLT) {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E012, SKERR_I2C_E012MSG);
-			}
-			else {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E015, SKERR_I2C_E015MSG);
-			}
-		}
-	}
-
-	/* Check the Value against the thresholds */
-	/* 2nd: Warning thresholds */
-	TooHigh = (pSen->SenValue > pSen->SenThreWarnHigh);
-	TooLow = (pSen->SenValue < pSen->SenThreWarnLow);
-		
-	if (!IsError && (TooHigh || TooLow)) {
-		/* Error condition is satisfied */
-		DoTrapSend = SK_TRUE;
-		DoErrLog = SK_TRUE;
-
-		if (pSen->SenErrFlag == SK_SEN_ERR_WARN) {
-			/* This state is the former one */
-
-			/* So check first whether we have to send a trap */
-			if (pSen->SenLastWarnTrapTS + SK_SEN_WARN_TR_HOLD > CurrTime) {
-				/*
-				 * Do NOT send the Trap. The hold back time
-				 * has to run out first.
-				 */
-				DoTrapSend = SK_FALSE;
-			}
-
-			/* Check now whether we have to log an Error */
-			if (pSen->SenLastWarnLogTS + SK_SEN_WARN_LOG_HOLD > CurrTime) {
-				/*
-				 * Do NOT log the error. The hold back time
-				 * has to run out first.
-				 */
-				DoErrLog = SK_FALSE;
-			}
-		}
-		else {
-			/* We came from a different state -> Set Begin Time Stamp */
-			pSen->SenBegWarnTS = CurrTime;
-			pSen->SenErrFlag = SK_SEN_ERR_WARN;
-		}
-
-		if (DoTrapSend) {
-			/* Set current Time */
-			pSen->SenLastWarnTrapTS = CurrTime;
-			pSen->SenWarnCts++;
-
-			/* Queue PNMI Event */
-			SkEventQueue(pAC, SKGE_PNMI, (TooHigh ?
-				SK_PNMI_EVT_SEN_WAR_UPP :
-				SK_PNMI_EVT_SEN_WAR_LOW),
-				ParaLocal);
-		}
-
-		if (DoErrLog) {
-			/* Set current Time */
-			pSen->SenLastWarnLogTS = CurrTime;
-
-			if (pSen->SenType == SK_SEN_TEMP) {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E009, SKERR_I2C_E009MSG);
-			}
-			else if (pSen->SenType == SK_SEN_VOLT) {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E010, SKERR_I2C_E010MSG);
-			}
-			else {
-				SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E014, SKERR_I2C_E014MSG);
-			}
-		}
-	}
-
-	/* Check for NO error at all */
-	if (!IsError && !TooHigh && !TooLow) {
-		/* Set o.k. Status if no error and no warning condition */
-		pSen->SenErrFlag = SK_SEN_ERR_OK;
-	}
-
-	/* End of check against the thresholds */
-
-	/* Bug fix AF: 16.Aug.2001: Correct the init base
-	 * of LM80 sensor.
-	 */
-	if (pSen->SenInit == SK_SEN_DYN_INIT_PCI_IO) {
-
-        pSen->SenInit = SK_SEN_DYN_INIT_NONE;
-
-		if (pSen->SenValue > SK_SEN_PCI_IO_RANGE_LIMITER) {
-			/* 5V PCI-IO Voltage */
-			pSen->SenThreWarnLow = SK_SEN_PCI_IO_5V_LOW_WARN;
-			pSen->SenThreErrLow = SK_SEN_PCI_IO_5V_LOW_ERR;
-		}
-		else {
-			/* 3.3V PCI-IO Voltage */
-			pSen->SenThreWarnHigh = SK_SEN_PCI_IO_3V3_HIGH_WARN;
-			pSen->SenThreErrHigh = SK_SEN_PCI_IO_3V3_HIGH_ERR;
-		}
-	}
-	
-#ifdef TEST_ONLY
-    /* Dynamic thresholds also for VAUX of LM80 sensor */
-	if (pSen->SenInit == SK_SEN_DYN_INIT_VAUX) {
-
-        pSen->SenInit = SK_SEN_DYN_INIT_NONE;
-
-		/* 3.3V VAUX Voltage */
-		if (pSen->SenValue > SK_SEN_VAUX_RANGE_LIMITER) {
-			pSen->SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN;
-			pSen->SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR;
-		}
-		/* 0V VAUX Voltage */
-		else {
-			pSen->SenThreWarnHigh = SK_SEN_VAUX_0V_WARN_ERR;
-			pSen->SenThreErrHigh = SK_SEN_VAUX_0V_WARN_ERR;
-		}
-	}
-
-	/*
-	 * Check initialization state:
-	 * The VIO Thresholds need adaption
-	 */
-	if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN &&
-	     pSen->SenValue > SK_SEN_WARNLOW2C &&
-	     pSen->SenValue < SK_SEN_WARNHIGH2) {
-		pSen->SenThreErrLow = SK_SEN_ERRLOW2C;
-		pSen->SenThreWarnLow = SK_SEN_WARNLOW2C;
-		pSen->SenInit = SK_TRUE;
-	}
-
-	if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN &&
-	     pSen->SenValue > SK_SEN_WARNLOW2 &&
-	     pSen->SenValue < SK_SEN_WARNHIGH2C) {
-		pSen->SenThreErrHigh = SK_SEN_ERRHIGH2C;
-		pSen->SenThreWarnHigh = SK_SEN_WARNHIGH2C;
-		pSen->SenInit = SK_TRUE;
-	}
-#endif
-
-	if (pSen->SenInit != SK_SEN_DYN_INIT_NONE) {
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E013, SKERR_I2C_E013MSG);
-	}
-}	/* SkI2cCheckSensor */
-
-
-/*
- * The only Event to be served is the timeout event
- *
- */
-int	SkI2cEvent(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_U32		Event,	/* Module specific Event */
-SK_EVPARA	Para)	/* Event specific Parameter */
-{
-	int			ReadComplete;
-	SK_SENSOR	*pSen;
-	SK_U32		Time;
-	SK_EVPARA	ParaLocal;
-	int			i;
-
-	/* New case: no sensors */
-	if (pAC->I2c.MaxSens == 0) {
-		return(0);
-	}
-
-	switch (Event) {
-	case SK_I2CEV_IRQ:
-		pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
-		ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
-
-		if (ReadComplete) {
-			/* Check sensor against defined thresholds */
-			SkI2cCheckSensor(pAC, pSen);
-
-			/* Increment Current sensor and set appropriate Timeout */
-			pAC->I2c.CurrSens++;
-			if (pAC->I2c.CurrSens >= pAC->I2c.MaxSens) {
-				pAC->I2c.CurrSens = 0;
-				Time = SK_I2C_TIM_LONG;
-			}
-			else {
-				Time = SK_I2C_TIM_SHORT;
-			}
-
-			/* Start Timer */
-			ParaLocal.Para64 = (SK_U64)0;
-
-			pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
-			
-			SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
-				SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
-		}
-        else {
-			/* Start Timer */
-			ParaLocal.Para64 = (SK_U64)0;
-
-			pAC->I2c.TimerMode = SK_TIMER_WATCH_SM;
-
-            SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH,
-				SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
-		}
-		break;
-	case SK_I2CEV_TIM:
-		if (pAC->I2c.TimerMode == SK_TIMER_NEW_GAUGING) {
-
-			ParaLocal.Para64 = (SK_U64)0;
-			SkTimerStop(pAC, IoC, &pAC->I2c.SenTimer);
-
-			pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
-			ReadComplete = SkI2cReadSensor(pAC, IoC, pSen);
-
-			if (ReadComplete) {
-				/* Check sensor against defined thresholds */
-				SkI2cCheckSensor(pAC, pSen);
-
-				/* Increment Current sensor and set appropriate Timeout */
-				pAC->I2c.CurrSens++;
-				if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) {
-					pAC->I2c.CurrSens = 0;
-					Time = SK_I2C_TIM_LONG;
-				}
-				else {
-					Time = SK_I2C_TIM_SHORT;
-				}
-
-				/* Start Timer */
-				ParaLocal.Para64 = (SK_U64)0;
-
-				pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
-
-				SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
-					SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
-			}
-		}
-		else {
-			pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens];
-			pSen->SenErrFlag = SK_SEN_ERR_FAULTY;
-			SK_I2C_STOP(IoC);
-
-			/* Increment Current sensor and set appropriate Timeout */
-			pAC->I2c.CurrSens++;
-			if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) {
-				pAC->I2c.CurrSens = 0;
-				Time = SK_I2C_TIM_LONG;
-			}
-			else {
-				Time = SK_I2C_TIM_SHORT;
-			}
-
-			/* Start Timer */
-			ParaLocal.Para64 = (SK_U64)0;
-
-			pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING;
-
-			SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time,
-				SKGE_I2C, SK_I2CEV_TIM, ParaLocal);
-		}
-		break;
-	case SK_I2CEV_CLEAR:
-		for (i = 0; i < SK_MAX_SENSORS; i++) {
-			pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK;
-			pAC->I2c.SenTable[i].SenErrCts = 0;
-			pAC->I2c.SenTable[i].SenWarnCts = 0;
-			pAC->I2c.SenTable[i].SenBegErrTS = 0;
-			pAC->I2c.SenTable[i].SenBegWarnTS = 0;
-			pAC->I2c.SenTable[i].SenLastErrTrapTS = (SK_U64)0;
-			pAC->I2c.SenTable[i].SenLastErrLogTS = (SK_U64)0;
-			pAC->I2c.SenTable[i].SenLastWarnTrapTS = (SK_U64)0;
-			pAC->I2c.SenTable[i].SenLastWarnLogTS = (SK_U64)0;
-		}
-		break;
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E006, SKERR_I2C_E006MSG);
-	}
-
-	return(0);
-}	/* SkI2cEvent*/
-
-#endif /* !SK_DIAG */
diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c
deleted file mode 100644
index a204f5bb55d4..000000000000
--- a/drivers/net/sk98lin/sklm80.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/******************************************************************************
- *
- * Name:	sklm80.c
- * Project:	Gigabit Ethernet Adapters, TWSI-Module
- * Version:	$Revision: 1.22 $
- * Date:	$Date: 2003/10/20 09:08:21 $
- * Purpose:	Functions to access Voltage and Temperature Sensor (LM80)
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
-	LM80 functions
-*/
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. ";
-#endif
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#include "h/lm80.h"
-#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
-
-#define	BREAK_OR_WAIT(pAC,IoC,Event)	break
-
-/*
- * read a sensors value (LM80 specific)
- *
- * This function reads a sensors value from the I2C sensor chip LM80.
- * The sensor is defined by its index into the sensors database in the struct
- * pAC points to.
- *
- * Returns	1 if the read is completed
- *		0 if the read must be continued (I2C Bus still allocated)
- */
-int SkLm80ReadSensor(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context needed in level 1 and 2 */
-SK_SENSOR	*pSen)	/* Sensor to be read */
-{
-	SK_I32		Value;
-
-	switch (pSen->SenState) {
-	case SK_SEN_IDLE:
-		/* Send address to ADDR register */
-		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0);
-
-		pSen->SenState = SK_SEN_VALUE ;
-		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
-	
-	case SK_SEN_VALUE:
-		/* Read value from data register */
-		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
-		
-		Value &= 0xff; /* only least significant byte is valid */
-
-		/* Do NOT check the Value against the thresholds */
-		/* Checking is done in the calling instance */
-
-		if (pSen->SenType == SK_SEN_VOLT) {
-			/* Voltage sensor */
-			pSen->SenValue = Value * SK_LM80_VT_LSB;
-			pSen->SenState = SK_SEN_IDLE ;
-			return(1);
-		}
-
-		if (pSen->SenType == SK_SEN_FAN) {
-			if (Value != 0 && Value != 0xff) {
-				/* Fan speed counter */
-				pSen->SenValue = SK_LM80_FAN_FAKTOR/Value;
-			}
-			else {
-				/* Indicate Fan error */
-				pSen->SenValue = 0;
-			}
-			pSen->SenState = SK_SEN_IDLE ;
-			return(1);
-		}
-
-		/* First: correct the value: it might be negative */
-		if ((Value & 0x80) != 0) {
-			/* Value is negative */
-			Value = Value - 256;
-		}
-
-		/* We have a temperature sensor and need to get the signed extension.
-		 * For now we get the extension from the last reading, so in the normal
-		 * case we won't see flickering temperatures.
-		 */
-		pSen->SenValue = (Value * SK_LM80_TEMP_LSB) +
-			(pSen->SenValue % SK_LM80_TEMP_LSB);
-
-		/* Send address to ADDR register */
-		SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0);
-
-		pSen->SenState = SK_SEN_VALEXT ;
-		BREAK_OR_WAIT(pAC, IoC, I2C_READ);
-	
-	case SK_SEN_VALEXT:
-		/* Read value from data register */
-		SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value));
-		Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */
-
-		/* cut the LSB bit */
-		pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) *
-			SK_LM80_TEMP_LSB);
-
-		if (pSen->SenValue < 0) {
-			/* Value negative: The bit value must be subtracted */
-			pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
-		}
-		else {
-			/* Value positive: The bit value must be added */
-			pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB);
-		}
-
-		pSen->SenState = SK_SEN_IDLE ;
-		return(1);
-	
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG);
-		return(1);
-	}
-
-	/* Not completed */
-	return(0);
-}
-
diff --git a/drivers/net/sk98lin/skqueue.c b/drivers/net/sk98lin/skqueue.c
deleted file mode 100644
index 0275b4f71d9b..000000000000
--- a/drivers/net/sk98lin/skqueue.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/******************************************************************************
- *
- * Name:	skqueue.c
- * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
- * Version:	$Revision: 1.20 $
- * Date:	$Date: 2003/09/16 13:44:00 $
- * Purpose:	Management of an event queue.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-
-/*
- *	Event queue and dispatcher
- */
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skqueue.c,v 1.20 2003/09/16 13:44:00 rschmidt Exp $ (C) Marvell.";
-#endif
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#include "h/skqueue.h"		/* Queue Definitions */
-#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
-
-#ifdef __C2MAN__
-/*
-	Event queue management.
-
-	General Description:
-
- */
-intro()
-{}
-#endif
-
-#define PRINTF(a,b,c)
-
-/*
- * init event queue management
- *
- * Must be called during init level 0.
- */
-void	SkEventInit(
-SK_AC	*pAC,	/* Adapter context */
-SK_IOC	Ioc,	/* IO context */
-int		Level)	/* Init level */
-{
-	switch (Level) {
-	case SK_INIT_DATA:
-		pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue;
-		break;
-	default:
-		break;
-	}
-}
-
-/*
- * add event to queue
- */
-void	SkEventQueue(
-SK_AC		*pAC,	/* Adapters context */
-SK_U32		Class,	/* Event Class */
-SK_U32		Event,	/* Event to be queued */
-SK_EVPARA	Para)	/* Event parameter */
-{
-	pAC->Event.EvPut->Class = Class;
-	pAC->Event.EvPut->Event = Event;
-	pAC->Event.EvPut->Para = Para;
-	
-	if (++pAC->Event.EvPut == &pAC->Event.EvQueue[SK_MAX_EVENT])
-		pAC->Event.EvPut = pAC->Event.EvQueue;
-
-	if (pAC->Event.EvPut == pAC->Event.EvGet) {
-		SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG);
-	}
-}
-
-/*
- * event dispatcher
- *	while event queue is not empty
- *		get event from queue
- *		send command to state machine
- *	end
- *	return error reported by individual Event function
- *		0 if no error occured.
- */
-int	SkEventDispatcher(
-SK_AC	*pAC,	/* Adapters Context */
-SK_IOC	Ioc)	/* Io context */
-{
-	SK_EVENTELEM	*pEv;	/* pointer into queue */
-	SK_U32			Class;
-	int			Rtv;
-
-	pEv = pAC->Event.EvGet;
-	
-	PRINTF("dispatch get %x put %x\n", pEv, pAC->Event.ev_put);
-	
-	while (pEv != pAC->Event.EvPut) {
-		PRINTF("dispatch Class %d Event %d\n", pEv->Class, pEv->Event);
-
-		switch (Class = pEv->Class) {
-#ifndef SK_USE_LAC_EV
-#ifndef SK_SLIM
-		case SKGE_RLMT:		/* RLMT Event */
-			Rtv = SkRlmtEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-		case SKGE_I2C:		/* I2C Event */
-			Rtv = SkI2cEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-		case SKGE_PNMI:		/* PNMI Event */
-			Rtv = SkPnmiEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-#endif	/* not SK_SLIM */
-#endif	/* not SK_USE_LAC_EV */
-		case SKGE_DRV:		/* Driver Event */
-			Rtv = SkDrvEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-#ifndef SK_USE_SW_TIMER
-		case SKGE_HWAC:
-			Rtv = SkGeSirqEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-#else /* !SK_USE_SW_TIMER */
-        case SKGE_SWT :
-			Rtv = SkSwtEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-#endif /* !SK_USE_SW_TIMER */
-#ifdef SK_USE_LAC_EV
-		case SKGE_LACP :
-			Rtv = SkLacpEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-		case SKGE_RSF :
-			Rtv = SkRsfEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-		case SKGE_MARKER :
-			Rtv = SkMarkerEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-		case SKGE_FD :
-			Rtv = SkFdEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-#endif /* SK_USE_LAC_EV */
-#ifdef	SK_USE_CSUM
-		case SKGE_CSUM :
-			Rtv = SkCsEvent(pAC, Ioc, pEv->Event, pEv->Para);
-			break;
-#endif	/* SK_USE_CSUM */
-		default :
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002, SKERR_Q_E002MSG);
-			Rtv = 0;
-		}
-
-		if (Rtv != 0) {
-			return(Rtv);
-		}
-
-		if (++pEv == &pAC->Event.EvQueue[SK_MAX_EVENT])
-			pEv = pAC->Event.EvQueue;
-
-		/* Renew get: it is used in queue_events to detect overruns */
-		pAC->Event.EvGet = pEv;
-	}
-
-	return(0);
-}
-
-/* End of file */
diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c
deleted file mode 100644
index be8d1ccddf6d..000000000000
--- a/drivers/net/sk98lin/skrlmt.c
+++ /dev/null
@@ -1,3257 +0,0 @@
-/******************************************************************************
- *
- * Name:	skrlmt.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.69 $
- * Date:	$Date: 2003/04/15 09:39:22 $
- * Purpose:	Manage links on SK-NET Adapters, esp. redundant ones.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module contains code for Link ManagemenT (LMT) of SK-NET Adapters.
- * It is mainly intended for adapters with more than one link.
- * For such adapters, this module realizes Redundant Link ManagemenT (RLMT).
- *
- * Include File Hierarchy:
- *
- *	"skdrv1st.h"
- *	"skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef	lint
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skrlmt.c,v 1.69 2003/04/15 09:39:22 tschilli Exp $ (C) Marvell.";
-#endif	/* !defined(lint) */
-
-#define __SKRLMT_C
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* cplusplus */
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* defines ********************************************************************/
-
-#ifndef SK_HWAC_LINK_LED
-#define SK_HWAC_LINK_LED(a,b,c,d)
-#endif	/* !defined(SK_HWAC_LINK_LED) */
-
-#ifndef DEBUG
-#define RLMT_STATIC	static
-#else	/* DEBUG */
-#define RLMT_STATIC
-
-#ifndef SK_LITTLE_ENDIAN
-/* First 32 bits */
-#define OFFS_LO32	1
-
-/* Second 32 bits */
-#define OFFS_HI32	0
-#else	/* SK_LITTLE_ENDIAN */
-/* First 32 bits */
-#define OFFS_LO32	0
-
-/* Second 32 bits */
-#define OFFS_HI32	1
-#endif	/* SK_LITTLE_ENDIAN */
-
-#endif	/* DEBUG */
-
-/* ----- Private timeout values ----- */
-
-#define SK_RLMT_MIN_TO_VAL			   125000	/* 1/8 sec. */
-#define SK_RLMT_DEF_TO_VAL			  1000000	/* 1 sec. */
-#define SK_RLMT_PORTDOWN_TIM_VAL	   900000	/* another 0.9 sec. */
-#define SK_RLMT_PORTSTART_TIM_VAL	   100000	/* 0.1 sec. */
-#define SK_RLMT_PORTUP_TIM_VAL		  2500000	/* 2.5 sec. */
-#define SK_RLMT_SEG_TO_VAL			900000000	/* 15 min. */
-
-/* Assume tick counter increment is 1 - may be set OS-dependent. */
-#ifndef SK_TICK_INCR
-#define SK_TICK_INCR	SK_CONSTU64(1)
-#endif	/* !defined(SK_TICK_INCR) */
-
-/*
- * Amount that a time stamp must be later to be recognized as "substantially
- * later". This is about 1/128 sec, but above 1 tick counter increment.
- */
-#define SK_RLMT_BC_DELTA		(1 + ((SK_TICKS_PER_SEC >> 7) > SK_TICK_INCR ? \
-									(SK_TICKS_PER_SEC >> 7) : SK_TICK_INCR))
-
-/* ----- Private RLMT defaults ----- */
-
-#define SK_RLMT_DEF_PREF_PORT	0					/* "Lower" port. */
-#define SK_RLMT_DEF_MODE 		SK_RLMT_CHECK_LINK	/* Default RLMT Mode. */
-
-/* ----- Private RLMT checking states ----- */
-
-#define SK_RLMT_RCS_SEG			1		/* RLMT Check State: check seg. */
-#define SK_RLMT_RCS_START_SEG	2		/* RLMT Check State: start check seg. */
-#define SK_RLMT_RCS_SEND_SEG	4		/* RLMT Check State: send BPDU packet */
-#define SK_RLMT_RCS_REPORT_SEG	8		/* RLMT Check State: report seg. */
-
-/* ----- Private PORT checking states ----- */
-
-#define SK_RLMT_PCS_TX			1		/* Port Check State: check tx. */
-#define SK_RLMT_PCS_RX			2		/* Port Check State: check rx. */
-
-/* ----- Private PORT events ----- */
-
-/* Note: Update simulation when changing these. */
-#define SK_RLMT_PORTSTART_TIM	1100	/* Port start timeout. */
-#define SK_RLMT_PORTUP_TIM		1101	/* Port can now go up. */
-#define SK_RLMT_PORTDOWN_RX_TIM	1102	/* Port did not receive once ... */
-#define SK_RLMT_PORTDOWN		1103	/* Port went down. */
-#define SK_RLMT_PORTDOWN_TX_TIM	1104	/* Partner did not receive ... */
-
-/* ----- Private RLMT events ----- */
-
-/* Note: Update simulation when changing these. */
-#define SK_RLMT_TIM				2100	/* RLMT timeout. */
-#define SK_RLMT_SEG_TIM			2101	/* RLMT segmentation check timeout. */
-
-#define TO_SHORTEN(tim)	((tim) / 2)
-
-/* Error numbers and messages. */
-#define SKERR_RLMT_E001		(SK_ERRBASE_RLMT + 0)
-#define SKERR_RLMT_E001_MSG	"No Packet."
-#define SKERR_RLMT_E002		(SKERR_RLMT_E001 + 1)
-#define SKERR_RLMT_E002_MSG	"Short Packet."
-#define SKERR_RLMT_E003		(SKERR_RLMT_E002 + 1)
-#define SKERR_RLMT_E003_MSG	"Unknown RLMT event."
-#define SKERR_RLMT_E004		(SKERR_RLMT_E003 + 1)
-#define SKERR_RLMT_E004_MSG	"PortsUp incorrect."
-#define SKERR_RLMT_E005		(SKERR_RLMT_E004 + 1)
-#define SKERR_RLMT_E005_MSG	\
- "Net seems to be segmented (different root bridges are reported on the ports)."
-#define SKERR_RLMT_E006		(SKERR_RLMT_E005 + 1)
-#define SKERR_RLMT_E006_MSG	"Duplicate MAC Address detected."
-#define SKERR_RLMT_E007		(SKERR_RLMT_E006 + 1)
-#define SKERR_RLMT_E007_MSG	"LinksUp incorrect."
-#define SKERR_RLMT_E008		(SKERR_RLMT_E007 + 1)
-#define SKERR_RLMT_E008_MSG	"Port not started but link came up."
-#define SKERR_RLMT_E009		(SKERR_RLMT_E008 + 1)
-#define SKERR_RLMT_E009_MSG	"Corrected illegal setting of Preferred Port."
-#define SKERR_RLMT_E010		(SKERR_RLMT_E009 + 1)
-#define SKERR_RLMT_E010_MSG	"Ignored illegal Preferred Port."
-
-/* LLC field values. */
-#define LLC_COMMAND_RESPONSE_BIT		1
-#define LLC_TEST_COMMAND				0xE3
-#define LLC_UI							0x03
-
-/* RLMT Packet fields. */
-#define	SK_RLMT_DSAP					0
-#define	SK_RLMT_SSAP					0
-#define SK_RLMT_CTRL					(LLC_TEST_COMMAND)
-#define SK_RLMT_INDICATOR0				0x53	/* S */
-#define SK_RLMT_INDICATOR1				0x4B	/* K */
-#define SK_RLMT_INDICATOR2				0x2D	/* - */
-#define SK_RLMT_INDICATOR3				0x52	/* R */
-#define SK_RLMT_INDICATOR4				0x4C	/* L */
-#define SK_RLMT_INDICATOR5				0x4D	/* M */
-#define SK_RLMT_INDICATOR6				0x54	/* T */
-#define SK_RLMT_PACKET_VERSION			0
-
-/* RLMT SPT Flag values. */
-#define	SK_RLMT_SPT_FLAG_CHANGE			0x01
-#define	SK_RLMT_SPT_FLAG_CHANGE_ACK		0x80
-
-/* RLMT SPT Packet fields. */
-#define	SK_RLMT_SPT_DSAP				0x42
-#define	SK_RLMT_SPT_SSAP				0x42
-#define SK_RLMT_SPT_CTRL				(LLC_UI)
-#define	SK_RLMT_SPT_PROTOCOL_ID0		0x00
-#define	SK_RLMT_SPT_PROTOCOL_ID1		0x00
-#define	SK_RLMT_SPT_PROTOCOL_VERSION_ID	0x00
-#define	SK_RLMT_SPT_BPDU_TYPE			0x00
-#define	SK_RLMT_SPT_FLAGS				0x00	/* ?? */
-#define	SK_RLMT_SPT_ROOT_ID0			0xFF	/* Lowest possible priority. */
-#define	SK_RLMT_SPT_ROOT_ID1			0xFF	/* Lowest possible priority. */
-
-/* Remaining 6 bytes will be the current port address. */
-#define	SK_RLMT_SPT_ROOT_PATH_COST0		0x00
-#define	SK_RLMT_SPT_ROOT_PATH_COST1		0x00
-#define	SK_RLMT_SPT_ROOT_PATH_COST2		0x00
-#define	SK_RLMT_SPT_ROOT_PATH_COST3		0x00
-#define	SK_RLMT_SPT_BRIDGE_ID0			0xFF	/* Lowest possible priority. */
-#define	SK_RLMT_SPT_BRIDGE_ID1			0xFF	/* Lowest possible priority. */
-
-/* Remaining 6 bytes will be the current port address. */
-#define	SK_RLMT_SPT_PORT_ID0			0xFF	/* Lowest possible priority. */
-#define	SK_RLMT_SPT_PORT_ID1			0xFF	/* Lowest possible priority. */
-#define	SK_RLMT_SPT_MSG_AGE0			0x00
-#define	SK_RLMT_SPT_MSG_AGE1			0x00
-#define	SK_RLMT_SPT_MAX_AGE0			0x00
-#define	SK_RLMT_SPT_MAX_AGE1			0xFF
-#define	SK_RLMT_SPT_HELLO_TIME0			0x00
-#define	SK_RLMT_SPT_HELLO_TIME1			0xFF
-#define	SK_RLMT_SPT_FWD_DELAY0			0x00
-#define	SK_RLMT_SPT_FWD_DELAY1			0x40
-
-/* Size defines. */
-#define SK_RLMT_MIN_PACKET_SIZE			34
-#define SK_RLMT_MAX_PACKET_SIZE			(SK_RLMT_MAX_TX_BUF_SIZE)
-#define SK_PACKET_DATA_LEN				(SK_RLMT_MAX_PACKET_SIZE - \
-										SK_RLMT_MIN_PACKET_SIZE)
-
-/* ----- RLMT packet types ----- */
-#define SK_PACKET_ANNOUNCE				1	/* Port announcement. */
-#define SK_PACKET_ALIVE					2	/* Alive packet to port. */
-#define SK_PACKET_ADDR_CHANGED			3	/* Port address changed. */
-#define SK_PACKET_CHECK_TX				4	/* Check your tx line. */
-
-#ifdef SK_LITTLE_ENDIAN
-#define SK_U16_TO_NETWORK_ORDER(Val,Addr) { \
-	SK_U8	*_Addr = (SK_U8*)(Addr); \
-	SK_U16	_Val = (SK_U16)(Val); \
-	*_Addr++ = (SK_U8)(_Val >> 8); \
-	*_Addr = (SK_U8)(_Val & 0xFF); \
-}
-#endif	/* SK_LITTLE_ENDIAN */
-
-#ifdef SK_BIG_ENDIAN
-#define SK_U16_TO_NETWORK_ORDER(Val,Addr) (*(SK_U16*)(Addr) = (SK_U16)(Val))
-#endif	/* SK_BIG_ENDIAN */
-
-#define AUTONEG_FAILED	SK_FALSE
-#define AUTONEG_SUCCESS	SK_TRUE
-
-
-/* typedefs *******************************************************************/
-
-/* RLMT packet.  Length: SK_RLMT_MAX_PACKET_SIZE (60) bytes. */
-typedef struct s_RlmtPacket {
-	SK_U8	DstAddr[SK_MAC_ADDR_LEN];
-	SK_U8	SrcAddr[SK_MAC_ADDR_LEN];
-	SK_U8	TypeLen[2];
-	SK_U8	DSap;
-	SK_U8	SSap;
-	SK_U8	Ctrl;
-	SK_U8	Indicator[7];
-	SK_U8	RlmtPacketType[2];
-	SK_U8	Align1[2];
-	SK_U8	Random[4];				/* Random value of requesting(!) station. */
-	SK_U8	RlmtPacketVersion[2];	/* RLMT Packet version. */
-	SK_U8	Data[SK_PACKET_DATA_LEN];
-} SK_RLMT_PACKET;
-
-typedef struct s_SpTreeRlmtPacket {
-	SK_U8	DstAddr[SK_MAC_ADDR_LEN];
-	SK_U8	SrcAddr[SK_MAC_ADDR_LEN];
-	SK_U8	TypeLen[2];
-	SK_U8	DSap;
-	SK_U8	SSap;
-	SK_U8	Ctrl;
-	SK_U8	ProtocolId[2];
-	SK_U8	ProtocolVersionId;
-	SK_U8	BpduType;
-	SK_U8	Flags;
-	SK_U8	RootId[8];
-	SK_U8	RootPathCost[4];
-	SK_U8	BridgeId[8];
-	SK_U8	PortId[2];
-	SK_U8	MessageAge[2];
-	SK_U8	MaxAge[2];
-	SK_U8	HelloTime[2];
-	SK_U8	ForwardDelay[2];
-} SK_SPTREE_PACKET;
-
-/* global variables ***********************************************************/
-
-SK_MAC_ADDR	SkRlmtMcAddr =	{{0x01,  0x00,  0x5A,  0x52,  0x4C,  0x4D}};
-SK_MAC_ADDR	BridgeMcAddr =	{{0x01,  0x80,  0xC2,  0x00,  0x00,  0x00}};
-
-/* local variables ************************************************************/
-
-/* None. */
-
-/* functions ******************************************************************/
-
-RLMT_STATIC void	SkRlmtCheckSwitch(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	NetIdx);
-RLMT_STATIC void	SkRlmtCheckSeg(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	NetIdx);
-RLMT_STATIC void	SkRlmtEvtSetNets(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	SK_EVPARA	Para);
-
-/******************************************************************************
- *
- *	SkRlmtInit - initialize data, set state to init
- *
- * Description:
- *
- *	SK_INIT_DATA
- *	============
- *
- *	This routine initializes all RLMT-related variables to a known state.
- *	The initial state is SK_RLMT_RS_INIT.
- *	All ports are initialized to SK_RLMT_PS_INIT.
- *
- *
- *	SK_INIT_IO
- *	==========
- *
- *	Nothing.
- *
- *
- *	SK_INIT_RUN
- *	===========
- *
- *	Determine the adapter's random value.
- *	Set the hw registers, the "logical MAC address", the
- *	RLMT multicast address, and eventually the BPDU multicast address.
- *
- * Context:
- *	init, pageable
- *
- * Returns:
- *	Nothing.
- */
-void	SkRlmtInit(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* I/O Context */
-int		Level)	/* Initialization Level */
-{
-	SK_U32		i, j;
-	SK_U64		Random;
-	SK_EVPARA	Para;
-    SK_MAC_ADDR		VirtualMacAddress;
-    SK_MAC_ADDR		PhysicalAMacAddress;
-    SK_BOOL		VirtualMacAddressSet;
-    SK_BOOL		PhysicalAMacAddressSet;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,
-		("RLMT Init level %d.\n", Level))
-
-	switch (Level) {
-	case SK_INIT_DATA:	/* Initialize data structures. */
-		SK_MEMSET((char *)&pAC->Rlmt, 0, sizeof(SK_RLMT));
-
-		for (i = 0; i < SK_MAX_MACS; i++) {
-			pAC->Rlmt.Port[i].PortState = SK_RLMT_PS_INIT;
-			pAC->Rlmt.Port[i].LinkDown = SK_TRUE;
-			pAC->Rlmt.Port[i].PortDown = SK_TRUE;
-			pAC->Rlmt.Port[i].PortStarted = SK_FALSE;
-			pAC->Rlmt.Port[i].PortNoRx = SK_FALSE;
-			pAC->Rlmt.Port[i].RootIdSet = SK_FALSE;
-			pAC->Rlmt.Port[i].PortNumber = i;
-			pAC->Rlmt.Port[i].Net = &pAC->Rlmt.Net[0];
-			pAC->Rlmt.Port[i].AddrPort = &pAC->Addr.Port[i];
-		}
-
-		pAC->Rlmt.NumNets = 1;
-		for (i = 0; i < SK_MAX_NETS; i++) {
-			pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
-			pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
-			pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
-			pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF;	  /* Automatic. */
-			/* Just assuming. */
-			pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
-			pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
-			pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
-			pAC->Rlmt.Net[i].NetNumber = i;
-		}
-
-		pAC->Rlmt.Net[0].Port[0] = &pAC->Rlmt.Port[0];
-		pAC->Rlmt.Net[0].Port[1] = &pAC->Rlmt.Port[1];
-#if SK_MAX_NETS > 1
-		pAC->Rlmt.Net[1].Port[0] = &pAC->Rlmt.Port[1];
-#endif	/* SK_MAX_NETS > 1 */
-		break;
-
-	case SK_INIT_IO:	/* GIMacsFound first available here. */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT,
-			("RLMT: %d MACs were detected.\n", pAC->GIni.GIMacsFound))
-
-		pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound;
-
-		/* Initialize HW registers? */
-		if (pAC->GIni.GIMacsFound == 1) {
-			Para.Para32[0] = SK_RLMT_MODE_CLS;
-			Para.Para32[1] = 0;
-			(void)SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, Para);
-		}
-		break;
-
-	case SK_INIT_RUN:
-		/* Ensure RLMT is set to one net. */
-		if (pAC->Rlmt.NumNets > 1) {
-			Para.Para32[0] = 1;
-			Para.Para32[1] = -1;
-			SkRlmtEvtSetNets(pAC, IoC, Para);
-		}
-
-		for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-			Random = SkOsGetTime(pAC);
-			*(SK_U32*)&pAC->Rlmt.Port[i].Random = *(SK_U32*)&Random;
-
-			for (j = 0; j < 4; j++) {
-				pAC->Rlmt.Port[i].Random[j] ^= pAC->Rlmt.Port[i].AddrPort->
-					CurrentMacAddress.a[SK_MAC_ADDR_LEN - 1 - j];
-			}
-
-			(void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY);
-			
-			/* Add RLMT MC address. */
-			(void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT);
-
-			if (pAC->Rlmt.Net[0].RlmtMode & SK_RLMT_CHECK_SEG) {
-				/* Add BPDU MC address. */
-				(void)SkAddrMcAdd(pAC, IoC, i, &BridgeMcAddr, SK_ADDR_PERMANENT);
-			}
-
-			(void)SkAddrMcUpdate(pAC, IoC, i);
-		}
-
-    	VirtualMacAddressSet = SK_FALSE;
-		/* Read virtual MAC address from Control Register File. */
-		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
-			
-            SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]);
-            VirtualMacAddressSet |= VirtualMacAddress.a[j];
-		}
-    	
-        PhysicalAMacAddressSet = SK_FALSE;
-		/* Read physical MAC address for MAC A from Control Register File. */
-		for (j = 0; j < SK_MAC_ADDR_LEN; j++) {
-			
-            SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]);
-            PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j];
-		}
-
-        /* check if the two mac addresses contain reasonable values */
-        if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) {
-
-            pAC->Rlmt.RlmtOff = SK_TRUE;
-        }
-
-        /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD
-           and the RLMT_LOOKAHEAD macros */
-        else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) {
-
-            pAC->Rlmt.RlmtOff = SK_TRUE;
-        }
-		else {
-			pAC->Rlmt.RlmtOff = SK_FALSE;
-		}
-		break;
-
-	default:	/* error */
-		break;
-	}
-	return;
-}	/* SkRlmtInit */
-
-
-/******************************************************************************
- *
- *	SkRlmtBuildCheckChain - build the check chain
- *
- * Description:
- *	This routine builds the local check chain:
- *	- Each port that is up checks the next port.
- *	- The last port that is up checks the first port that is up.
- *
- * Notes:
- *	- Currently only local ports are considered when building the chain.
- *	- Currently the SuspectState is just reset;
- *	  it would be better to save it ...
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtBuildCheckChain(
-SK_AC	*pAC,	/* Adapter Context */
-SK_U32	NetIdx)	/* Net Number */
-{
-	SK_U32			i;
-	SK_U32			NumMacsUp;
-	SK_RLMT_PORT *	FirstMacUp;
-	SK_RLMT_PORT *	PrevMacUp;
-
-	FirstMacUp	= NULL;
-	PrevMacUp	= NULL;
-	
-	if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) {
-		for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) {
-			pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;
-		}
-		return;	/* Done. */
-	}
-			
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SkRlmtBuildCheckChain.\n"))
-
-	NumMacsUp = 0;
-
-	for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
-		pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0;
-		pAC->Rlmt.Net[NetIdx].Port[i]->PortsSuspect = 0;
-		pAC->Rlmt.Net[NetIdx].Port[i]->CheckingState &=
-			~(SK_RLMT_PCS_RX | SK_RLMT_PCS_TX);
-
-		/*
-		 * If more than two links are detected we should consider
-		 * checking at least two other ports:
-		 * 1. the next port that is not LinkDown and
-		 * 2. the next port that is not PortDown.
-		 */
-		if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) {
-			if (NumMacsUp == 0) {
-				FirstMacUp = pAC->Rlmt.Net[NetIdx].Port[i];
-			}
-			else {
-				PrevMacUp->PortCheck[
-					pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked].CheckAddr =
-					pAC->Rlmt.Net[NetIdx].Port[i]->AddrPort->CurrentMacAddress;
-				PrevMacUp->PortCheck[
-					PrevMacUp->PortsChecked].SuspectTx = SK_FALSE;
-				PrevMacUp->PortsChecked++;
-			}
-			PrevMacUp = pAC->Rlmt.Net[NetIdx].Port[i];
-			NumMacsUp++;
-		}
-	}
-
-	if (NumMacsUp > 1) {
-		PrevMacUp->PortCheck[PrevMacUp->PortsChecked].CheckAddr =
-			FirstMacUp->AddrPort->CurrentMacAddress;
-		PrevMacUp->PortCheck[PrevMacUp->PortsChecked].SuspectTx =
-			SK_FALSE;
-		PrevMacUp->PortsChecked++;
-	}
-
-#ifdef DEBUG
-	for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Port %d checks %d other ports: %2X.\n", i,
-				pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked,
-				pAC->Rlmt.Net[NetIdx].Port[i]->PortCheck[0].CheckAddr.a[5]))
-	}
-#endif	/* DEBUG */
-
-	return;
-}	/* SkRlmtBuildCheckChain */
-
-
-/******************************************************************************
- *
- *	SkRlmtBuildPacket - build an RLMT packet
- *
- * Description:
- *	This routine sets up an RLMT packet.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	NULL or pointer to RLMT mbuf
- */
-RLMT_STATIC SK_MBUF	*SkRlmtBuildPacket(
-SK_AC		*pAC,		/* Adapter Context */
-SK_IOC		IoC,		/* I/O Context */
-SK_U32		PortNumber,	/* Sending port */
-SK_U16		PacketType,	/* RLMT packet type */
-SK_MAC_ADDR	*SrcAddr,	/* Source address */
-SK_MAC_ADDR	*DestAddr)	/* Destination address */
-{
-	int		i;
-	SK_U16		Length;
-	SK_MBUF		*pMb;
-	SK_RLMT_PACKET	*pPacket;
-
-#ifdef DEBUG
-	SK_U8	CheckSrc  = 0;
-	SK_U8	CheckDest = 0;
-	
-	for (i = 0; i < SK_MAC_ADDR_LEN; ++i) {
-		CheckSrc  |= SrcAddr->a[i];
-		CheckDest |= DestAddr->a[i];
-	}
-
-	if ((CheckSrc == 0) || (CheckDest == 0)) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_ERR,
-			("SkRlmtBuildPacket: Invalid %s%saddr.\n",
-			 (CheckSrc == 0 ? "Src" : ""), (CheckDest == 0 ? "Dest" : "")))
-	}
-#endif
-
-	if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != NULL) {
-		pPacket = (SK_RLMT_PACKET*)pMb->pData;
-		for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
-			pPacket->DstAddr[i] = DestAddr->a[i];
-			pPacket->SrcAddr[i] = SrcAddr->a[i];
-		}
-		pPacket->DSap = SK_RLMT_DSAP;
-		pPacket->SSap = SK_RLMT_SSAP;
-		pPacket->Ctrl = SK_RLMT_CTRL;
-		pPacket->Indicator[0] = SK_RLMT_INDICATOR0;
-		pPacket->Indicator[1] = SK_RLMT_INDICATOR1;
-		pPacket->Indicator[2] = SK_RLMT_INDICATOR2;
-		pPacket->Indicator[3] = SK_RLMT_INDICATOR3;
-		pPacket->Indicator[4] = SK_RLMT_INDICATOR4;
-		pPacket->Indicator[5] = SK_RLMT_INDICATOR5;
-		pPacket->Indicator[6] = SK_RLMT_INDICATOR6;
-
-		SK_U16_TO_NETWORK_ORDER(PacketType, &pPacket->RlmtPacketType[0]);
-
-		for (i = 0; i < 4; i++) {
-			pPacket->Random[i] = pAC->Rlmt.Port[PortNumber].Random[i];
-		}
-		
-		SK_U16_TO_NETWORK_ORDER(
-			SK_RLMT_PACKET_VERSION, &pPacket->RlmtPacketVersion[0]);
-
-		for (i = 0; i < SK_PACKET_DATA_LEN; i++) {
-			pPacket->Data[i] = 0x00;
-		}
-
-		Length = SK_RLMT_MAX_PACKET_SIZE;	/* Or smaller. */
-		pMb->Length = Length;
-		pMb->PortIdx = PortNumber;
-		Length -= 14;
-		SK_U16_TO_NETWORK_ORDER(Length, &pPacket->TypeLen[0]);
-
-		if (PacketType == SK_PACKET_ALIVE) {
-			pAC->Rlmt.Port[PortNumber].TxHelloCts++;
-		}
-	}
-
-	return (pMb);
-}	/* SkRlmtBuildPacket */
-
-
-/******************************************************************************
- *
- *	SkRlmtBuildSpanningTreePacket - build spanning tree check packet
- *
- * Description:
- *	This routine sets up a BPDU packet for spanning tree check.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	NULL or pointer to RLMT mbuf
- */
-RLMT_STATIC SK_MBUF	*SkRlmtBuildSpanningTreePacket(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-SK_U32	PortNumber)	/* Sending port */
-{
-	unsigned			i;
-	SK_U16				Length;
-	SK_MBUF				*pMb;
-	SK_SPTREE_PACKET	*pSPacket;
-
-	if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) !=
-		NULL) {
-		pSPacket = (SK_SPTREE_PACKET*)pMb->pData;
-		for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
-			pSPacket->DstAddr[i] = BridgeMcAddr.a[i];
-			pSPacket->SrcAddr[i] =
-				pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i];
-		}
-		pSPacket->DSap = SK_RLMT_SPT_DSAP;
-		pSPacket->SSap = SK_RLMT_SPT_SSAP;
-		pSPacket->Ctrl = SK_RLMT_SPT_CTRL;
-
-		pSPacket->ProtocolId[0] = SK_RLMT_SPT_PROTOCOL_ID0;
-		pSPacket->ProtocolId[1] = SK_RLMT_SPT_PROTOCOL_ID1;
-		pSPacket->ProtocolVersionId = SK_RLMT_SPT_PROTOCOL_VERSION_ID;
-		pSPacket->BpduType = SK_RLMT_SPT_BPDU_TYPE;
-		pSPacket->Flags = SK_RLMT_SPT_FLAGS;
-		pSPacket->RootId[0] = SK_RLMT_SPT_ROOT_ID0;
-		pSPacket->RootId[1] = SK_RLMT_SPT_ROOT_ID1;
-		pSPacket->RootPathCost[0] = SK_RLMT_SPT_ROOT_PATH_COST0;
-		pSPacket->RootPathCost[1] = SK_RLMT_SPT_ROOT_PATH_COST1;
-		pSPacket->RootPathCost[2] = SK_RLMT_SPT_ROOT_PATH_COST2;
-		pSPacket->RootPathCost[3] = SK_RLMT_SPT_ROOT_PATH_COST3;
-		pSPacket->BridgeId[0] = SK_RLMT_SPT_BRIDGE_ID0;
-		pSPacket->BridgeId[1] = SK_RLMT_SPT_BRIDGE_ID1;
-
-		/*
-		 * Use logical MAC address as bridge ID and filter these packets
-		 * on receive.
-		 */
-		for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
-			pSPacket->BridgeId[i + 2] = pSPacket->RootId[i + 2] =
-				pAC->Addr.Net[pAC->Rlmt.Port[PortNumber].Net->NetNumber].
-					CurrentMacAddress.a[i];
-		}
-		pSPacket->PortId[0] = SK_RLMT_SPT_PORT_ID0;
-		pSPacket->PortId[1] = SK_RLMT_SPT_PORT_ID1;
-		pSPacket->MessageAge[0] = SK_RLMT_SPT_MSG_AGE0;
-		pSPacket->MessageAge[1] = SK_RLMT_SPT_MSG_AGE1;
-		pSPacket->MaxAge[0] = SK_RLMT_SPT_MAX_AGE0;
-		pSPacket->MaxAge[1] = SK_RLMT_SPT_MAX_AGE1;
-		pSPacket->HelloTime[0] = SK_RLMT_SPT_HELLO_TIME0;
-		pSPacket->HelloTime[1] = SK_RLMT_SPT_HELLO_TIME1;
-		pSPacket->ForwardDelay[0] = SK_RLMT_SPT_FWD_DELAY0;
-		pSPacket->ForwardDelay[1] = SK_RLMT_SPT_FWD_DELAY1;
-
-		Length = SK_RLMT_MAX_PACKET_SIZE;	/* Or smaller. */
-		pMb->Length = Length;
-		pMb->PortIdx = PortNumber;
-		Length -= 14;
-		SK_U16_TO_NETWORK_ORDER(Length, &pSPacket->TypeLen[0]);
-
-		pAC->Rlmt.Port[PortNumber].TxSpHelloReqCts++;
-	}
-
-	return (pMb);
-}	/* SkRlmtBuildSpanningTreePacket */
-
-
-/******************************************************************************
- *
- *	SkRlmtSend - build and send check packets
- *
- * Description:
- *	Depending on the RLMT state and the checking state, several packets
- *	are sent through the indicated port.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	Nothing.
- */
-RLMT_STATIC void	SkRlmtSend(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-SK_U32	PortNumber)	/* Sending port */
-{
-	unsigned	j;
-	SK_EVPARA	Para;
-	SK_RLMT_PORT	*pRPort;
-
-	pRPort = &pAC->Rlmt.Port[PortNumber];
-	if (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) {
-		if (pRPort->CheckingState & (SK_RLMT_PCS_TX | SK_RLMT_PCS_RX)) {
-			/* Port is suspicious. Send the RLMT packet to the RLMT mc addr. */
-			if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
-				SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
-				&SkRlmtMcAddr)) != NULL) {
-				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-			}
-		}
-		else {
-			/*
-			 * Send a directed RLMT packet to all ports that are
-			 * checked by the indicated port.
-			 */
-			for (j = 0; j < pRPort->PortsChecked; j++) {
-				if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
-					SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
-					&pRPort->PortCheck[j].CheckAddr)) != NULL) {
-					SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-				}
-			}
-		}
-	}
-
-	if ((pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) &&
-		(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEND_SEG)) {
-		/*
-		 * Send a BPDU packet to make a connected switch tell us
-		 * the correct root bridge.
-		 */
-		if ((Para.pParaPtr =
-			SkRlmtBuildSpanningTreePacket(pAC, IoC, PortNumber)) != NULL) {
-			pAC->Rlmt.Port[PortNumber].Net->CheckingState &= ~SK_RLMT_RCS_SEND_SEG;
-			pRPort->RootIdSet = SK_FALSE;
-
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_TX,
-				("SkRlmtSend: BPDU Packet on Port %u.\n", PortNumber))
-		}
-	}
-	return;
-}	/* SkRlmtSend */
-
-
-/******************************************************************************
- *
- *	SkRlmtPortReceives - check if port is (going) down and bring it up
- *
- * Description:
- *	This routine checks if a port who received a non-BPDU packet
- *	needs to go up or needs to be stopped going down.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	Nothing.
- */
-RLMT_STATIC void	SkRlmtPortReceives(
-SK_AC	*pAC,			/* Adapter Context */
-SK_IOC	IoC,			/* I/O Context */
-SK_U32	PortNumber)		/* Port to check */
-{
-	SK_RLMT_PORT	*pRPort;
-	SK_EVPARA		Para;
-
-	pRPort = &pAC->Rlmt.Port[PortNumber];
-	pRPort->PortNoRx = SK_FALSE;
-
-	if ((pRPort->PortState == SK_RLMT_PS_DOWN) &&
-		!(pRPort->CheckingState & SK_RLMT_PCS_TX)) {
-		/*
-		 * Port is marked down (rx), but received a non-BPDU packet.
-		 * Bring it up.
-		 */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-			("SkRlmtPacketReceive: Received on PortDown.\n"))
-
-		pRPort->PortState = SK_RLMT_PS_GOING_UP;
-		pRPort->GuTimeStamp = SkOsGetTime(pAC);
-		Para.Para32[0] = PortNumber;
-		Para.Para32[1] = (SK_U32)-1;
-		SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL,
-			SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para);
-		pRPort->CheckingState &= ~SK_RLMT_PCS_RX;
-		/* pAC->Rlmt.CheckSwitch = SK_TRUE; */
-		SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
-	}	/* PortDown && !SuspectTx */
-	else if (pRPort->CheckingState & SK_RLMT_PCS_RX) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-			("SkRlmtPacketReceive: Stop bringing port down.\n"))
-		SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
-		pRPort->CheckingState &= ~SK_RLMT_PCS_RX;
-		/* pAC->Rlmt.CheckSwitch = SK_TRUE; */
-		SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
-	}	/* PortGoingDown */
-
-	return;
-}	/* SkRlmtPortReceives */
-
-
-/******************************************************************************
- *
- *	SkRlmtPacketReceive - receive a packet for closer examination
- *
- * Description:
- *	This routine examines a packet more closely than SK_RLMT_LOOKAHEAD.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	Nothing.
- */
-RLMT_STATIC void	SkRlmtPacketReceive(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* I/O Context */
-SK_MBUF	*pMb)	/* Received packet */
-{
-#ifdef xDEBUG
-	extern	void DumpData(char *p, int size);
-#endif	/* DEBUG */
-	int					i;
-	unsigned			j;
-	SK_U16				PacketType;
-	SK_U32				PortNumber;
-	SK_ADDR_PORT		*pAPort;
-	SK_RLMT_PORT		*pRPort;
-	SK_RLMT_PACKET		*pRPacket;
-	SK_SPTREE_PACKET	*pSPacket;
-	SK_EVPARA			Para;
-
-	PortNumber	= pMb->PortIdx;
-	pAPort = &pAC->Addr.Port[PortNumber];
-	pRPort = &pAC->Rlmt.Port[PortNumber];
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-		("SkRlmtPacketReceive: PortNumber == %d.\n", PortNumber))
-
-	pRPacket = (SK_RLMT_PACKET*)pMb->pData;
-	pSPacket = (SK_SPTREE_PACKET*)pRPacket;
-
-#ifdef xDEBUG
-	DumpData((char *)pRPacket, 32);
-#endif	/* DEBUG */
-
-	if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) != 0) {
-		SkRlmtPortReceives(pAC, IoC, PortNumber);
-	}
-	
-	/* Check destination address. */
-
-	if (!SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->DstAddr) &&
-		!SK_ADDR_EQUAL(SkRlmtMcAddr.a, pRPacket->DstAddr) &&
-		!SK_ADDR_EQUAL(BridgeMcAddr.a, pRPacket->DstAddr)) {
-
-		/* Not sent to current MAC or registered MC address => Trash it. */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-			("SkRlmtPacketReceive: Not for me.\n"))
-
-		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-		return;
-	}
-	else if (SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->SrcAddr)) {
-
-		/*
-		 * Was sent by same port (may happen during port switching
-		 * or in case of duplicate MAC addresses).
-		 */
-
-		/*
-		 * Check for duplicate address here:
-		 * If Packet.Random != My.Random => DupAddr.
-		 */
-		for (i = 3; i >= 0; i--) {
-			if (pRPort->Random[i] != pRPacket->Random[i]) {
-				break;
-			}
-		}
-
-		/*
-		 * CAUTION: Do not check for duplicate MAC address in RLMT Alive Reply
-		 * packets (they have the LLC_COMMAND_RESPONSE_BIT set in
-		 * pRPacket->SSap).
-		 */
-		if (i >= 0 && pRPacket->DSap == SK_RLMT_DSAP &&
-			pRPacket->Ctrl == SK_RLMT_CTRL &&
-			pRPacket->SSap == SK_RLMT_SSAP &&
-			pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 &&
-			pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 &&
-			pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 &&
-			pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 &&
-			pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 &&
-			pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 &&
-			pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-				("SkRlmtPacketReceive: Duplicate MAC Address.\n"))
-
-			/* Error Log entry. */
-			SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E006, SKERR_RLMT_E006_MSG);
-		}
-		else {
-			/* Simply trash it. */
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-				("SkRlmtPacketReceive: Sent by me.\n"))
-		}
-
-		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-		return;
-	}
-
-	/* Check SuspectTx entries. */
-	if (pRPort->PortsSuspect > 0) {
-		for (j = 0; j < pRPort->PortsChecked; j++) {
-			if (pRPort->PortCheck[j].SuspectTx &&
-				SK_ADDR_EQUAL(
-					pRPacket->SrcAddr, pRPort->PortCheck[j].CheckAddr.a)) {
-				pRPort->PortCheck[j].SuspectTx = SK_FALSE;
-				pRPort->PortsSuspect--;
-				break;
-			}
-		}
-	}
-
-	/* Determine type of packet. */
-	if (pRPacket->DSap == SK_RLMT_DSAP &&
-		pRPacket->Ctrl == SK_RLMT_CTRL &&
-		(pRPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SSAP &&
-		pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 &&
-		pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 &&
-		pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 &&
-		pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 &&
-		pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 &&
-		pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 &&
-		pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) {
-
-		/* It's an RLMT packet. */
-		PacketType = (SK_U16)((pRPacket->RlmtPacketType[0] << 8) |
-			pRPacket->RlmtPacketType[1]);
-
-		switch (PacketType) {
-		case SK_PACKET_ANNOUNCE:	/* Not yet used. */
-#if 0
-			/* Build the check chain. */
-			SkRlmtBuildCheckChain(pAC);
-#endif	/* 0 */
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-				("SkRlmtPacketReceive: Announce.\n"))
-
-			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-			break;
-
-		case SK_PACKET_ALIVE:
-			if (pRPacket->SSap & LLC_COMMAND_RESPONSE_BIT) {
-				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-					("SkRlmtPacketReceive: Alive Reply.\n"))
-
-				if (!(pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_LLC) ||
-					SK_ADDR_EQUAL(
-						pRPacket->DstAddr, pAPort->CurrentMacAddress.a)) {
-					/* Obviously we could send something. */
-					if (pRPort->CheckingState & SK_RLMT_PCS_TX) {
-						pRPort->CheckingState &=  ~SK_RLMT_PCS_TX;
-						SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
-					}
-
-					if ((pRPort->PortState == SK_RLMT_PS_DOWN) &&
-						!(pRPort->CheckingState & SK_RLMT_PCS_RX)) {
-						pRPort->PortState = SK_RLMT_PS_GOING_UP;
-						pRPort->GuTimeStamp = SkOsGetTime(pAC);
-
-						SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
-
-						Para.Para32[0] = PortNumber;
-						Para.Para32[1] = (SK_U32)-1;
-						SkTimerStart(pAC, IoC, &pRPort->UpTimer,
-							SK_RLMT_PORTUP_TIM_VAL, SKGE_RLMT,
-							SK_RLMT_PORTUP_TIM, Para);
-					}
-				}
-
-				/* Mark sending port as alive? */
-				SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-			}
-			else {	/* Alive Request Packet. */
-				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-					("SkRlmtPacketReceive: Alive Request.\n"))
-
-				pRPort->RxHelloCts++;
-
-				/* Answer. */
-				for (i = 0; i < SK_MAC_ADDR_LEN; i++) {
-					pRPacket->DstAddr[i] = pRPacket->SrcAddr[i];
-					pRPacket->SrcAddr[i] =
-						pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i];
-				}
-				pRPacket->SSap |= LLC_COMMAND_RESPONSE_BIT;
-
-				Para.pParaPtr = pMb;
-				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-			}
-			break;
-
-		case SK_PACKET_CHECK_TX:
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-				("SkRlmtPacketReceive: Check your tx line.\n"))
-
-			/* A port checking us requests us to check our tx line. */
-			pRPort->CheckingState |= SK_RLMT_PCS_TX;
-
-			/* Start PortDownTx timer. */
-			Para.Para32[0] = PortNumber;
-			Para.Para32[1] = (SK_U32)-1;
-			SkTimerStart(pAC, IoC, &pRPort->DownTxTimer,
-				SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT,
-				SK_RLMT_PORTDOWN_TX_TIM, Para);
-
-			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-
-			if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber,
-				SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress,
-				&SkRlmtMcAddr)) != NULL) {
-				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-			}
-			break;
-
-		case SK_PACKET_ADDR_CHANGED:
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-				("SkRlmtPacketReceive: Address Change.\n"))
-
-			/* Build the check chain. */
-			SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
-			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-			break;
-
-		default:
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-				("SkRlmtPacketReceive: Unknown RLMT packet.\n"))
-
-			/* RA;:;: ??? */
-			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-		}
-	}
-	else if (pSPacket->DSap == SK_RLMT_SPT_DSAP &&
-		pSPacket->Ctrl == SK_RLMT_SPT_CTRL &&
-		(pSPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SPT_SSAP) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-			("SkRlmtPacketReceive: BPDU Packet.\n"))
-
-		/* Spanning Tree packet. */
-		pRPort->RxSpHelloCts++;
-
-		if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pAC->Addr.Net[pAC->Rlmt.
-			Port[PortNumber].Net->NetNumber].CurrentMacAddress.a[0])) {
-			/*
-			 * Check segmentation if a new root bridge is set and
-			 * the segmentation check is not currently running.
-			 */
-			if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pRPort->Root.Id[2]) &&
-				(pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) &&
-				(pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG)
-				!= 0 && (pAC->Rlmt.Port[PortNumber].Net->CheckingState &
-				SK_RLMT_RCS_SEG) == 0) {
-				pAC->Rlmt.Port[PortNumber].Net->CheckingState |=
-					SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG;
-			}
-
-			/* Store tree view of this port. */
-			for (i = 0; i < 8; i++) {
-				pRPort->Root.Id[i] = pSPacket->RootId[i];
-			}
-			pRPort->RootIdSet = SK_TRUE;
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP,
-				("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
-					PortNumber,
-					pRPort->Root.Id[0], pRPort->Root.Id[1],
-					pRPort->Root.Id[2], pRPort->Root.Id[3],
-					pRPort->Root.Id[4], pRPort->Root.Id[5],
-					pRPort->Root.Id[6], pRPort->Root.Id[7]))
-		}
-
-		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-		if ((pAC->Rlmt.Port[PortNumber].Net->CheckingState &
-			SK_RLMT_RCS_REPORT_SEG) != 0) {
-			SkRlmtCheckSeg(pAC, IoC, pAC->Rlmt.Port[PortNumber].Net->NetNumber);
-		}
-	}
-	else {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX,
-			("SkRlmtPacketReceive: Unknown Packet Type.\n"))
-
-		/* Unknown packet. */
-		SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-	}
-	return;
-}	/* SkRlmtPacketReceive */
-
-
-/******************************************************************************
- *
- *	SkRlmtCheckPort - check if a port works
- *
- * Description:
- *	This routine checks if a port whose link is up received something
- *	and if it seems to transmit successfully.
- *
- *	# PortState: PsInit, PsLinkDown, PsDown, PsGoingUp, PsUp
- *	# PortCheckingState (Bitfield): ChkTx, ChkRx, ChkSeg
- *	# RlmtCheckingState (Bitfield): ChkSeg, StartChkSeg, ReportSeg
- *
- *	if (Rx - RxBpdu == 0) {	# No rx.
- *		if (state == PsUp) {
- *			PortCheckingState |= ChkRx
- *		}
- *		if (ModeCheckSeg && (Timeout ==
- *			TO_SHORTEN(RLMT_DEFAULT_TIMEOUT))) {
- *			RlmtCheckingState |= ChkSeg)
- *			PortCheckingState |= ChkSeg
- *		}
- *		NewTimeout = TO_SHORTEN(Timeout)
- *		if (NewTimeout < RLMT_MIN_TIMEOUT) {
- *			NewTimeout = RLMT_MIN_TIMEOUT
- *			PortState = PsDown
- *			...
- *		}
- *	}
- *	else {	# something was received
- *		# Set counter to 0 at LinkDown?
- *		#   No - rx may be reported after LinkDown ???
- *		PortCheckingState &= ~ChkRx
- *		NewTimeout = RLMT_DEFAULT_TIMEOUT
- *		if (RxAck == 0) {
- *			possible reasons:
- *			is my tx line bad? --
- *				send RLMT multicast and report
- *				back internally? (only possible
- *				between ports on same adapter)
- *		}
- *		if (RxChk == 0) {
- *			possible reasons:
- *			- tx line of port set to check me
- *			  maybe bad
- *			- no other port/adapter available or set
- *			  to check me
- *			- adapter checking me has a longer
- *			  timeout
- *			??? anything that can be done here?
- *		}
- *	}
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	New timeout value.
- */
-RLMT_STATIC SK_U32	SkRlmtCheckPort(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-SK_U32	PortNumber)	/* Port to check */
-{
-	unsigned		i;
-	SK_U32			NewTimeout;
-	SK_RLMT_PORT	*pRPort;
-	SK_EVPARA		Para;
-
-	pRPort = &pAC->Rlmt.Port[PortNumber];
-
-	if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) == 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SkRlmtCheckPort %d: No (%d) receives in last time slot.\n",
-				PortNumber, pRPort->PacketsPerTimeSlot))
-
-		/*
-		 * Check segmentation if there was no receive at least twice
-		 * in a row (PortNoRx is already set) and the segmentation
-		 * check is not currently running.
-		 */
-
-		if (pRPort->PortNoRx && (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) &&
-			(pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) &&
-			!(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEG)) {
-			pAC->Rlmt.Port[PortNumber].Net->CheckingState |=
-				SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG;
-		}
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SkRlmtCheckPort: PortsSuspect %d, PcsRx %d.\n",
-				pRPort->PortsSuspect, pRPort->CheckingState & SK_RLMT_PCS_RX))
-
-		if (pRPort->PortState != SK_RLMT_PS_DOWN) {
-			NewTimeout = TO_SHORTEN(pAC->Rlmt.Port[PortNumber].Net->TimeoutValue);
-			if (NewTimeout < SK_RLMT_MIN_TO_VAL) {
-				NewTimeout = SK_RLMT_MIN_TO_VAL;
-			}
-
-			if (!(pRPort->CheckingState & SK_RLMT_PCS_RX)) {
-				Para.Para32[0] = PortNumber;
-				pRPort->CheckingState |= SK_RLMT_PCS_RX;
-
-				/*
-				 * What shall we do if the port checked by this one receives
-				 * our request frames?  What's bad - our rx line or his tx line?
-				 */
-				Para.Para32[1] = (SK_U32)-1;
-				SkTimerStart(pAC, IoC, &pRPort->DownRxTimer,
-					SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT,
-					SK_RLMT_PORTDOWN_RX_TIM, Para);
-
-				for (i = 0; i < pRPort->PortsChecked; i++) {
-					if (pRPort->PortCheck[i].SuspectTx) {
-						continue;
-					}
-					pRPort->PortCheck[i].SuspectTx = SK_TRUE;
-					pRPort->PortsSuspect++;
-					if ((Para.pParaPtr =
-						SkRlmtBuildPacket(pAC, IoC, PortNumber, SK_PACKET_CHECK_TX,
-							&pAC->Addr.Port[PortNumber].CurrentMacAddress,
-							&pRPort->PortCheck[i].CheckAddr)) != NULL) {
-						SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-					}
-				}
-			}
-		}
-		else {	/* PortDown -- or all partners suspect. */
-			NewTimeout = SK_RLMT_DEF_TO_VAL;
-		}
-		pRPort->PortNoRx = SK_TRUE;
-	}
-	else {	/* A non-BPDU packet was received. */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SkRlmtCheckPort %d: %d (%d) receives in last time slot.\n",
-				PortNumber,
-				pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot,
-				pRPort->PacketsPerTimeSlot))
-		
-		SkRlmtPortReceives(pAC, IoC, PortNumber);
-		if (pAC->Rlmt.CheckSwitch) {
-			SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
-		}
-
-		NewTimeout = SK_RLMT_DEF_TO_VAL;
-	}
-
-	return (NewTimeout);
-}	/* SkRlmtCheckPort */
-
-
-/******************************************************************************
- *
- *	SkRlmtSelectBcRx - select new active port, criteria 1 (CLP)
- *
- * Description:
- *	This routine selects the port that received a broadcast frame
- *	substantially later than all other ports.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	SK_BOOL
- */
-RLMT_STATIC SK_BOOL	SkRlmtSelectBcRx(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-SK_U32	Active,		/* Active port */
-SK_U32	PrefPort,	/* Preferred port */
-SK_U32	*pSelect)	/* New active port */
-{
-	SK_U64		BcTimeStamp;
-	SK_U32		i;
-	SK_BOOL		PortFound;
-
-	BcTimeStamp = 0;	/* Not totally necessary, but feeling better. */
-	PortFound = SK_FALSE;
-	
-	/* Select port with the latest TimeStamp. */
-	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("TimeStamp Port %d (Down: %d, NoRx: %d): %08x %08x.\n",
-				i,
-   				pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx,
-				*((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_HI32),
-				*((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_LO32)))
-
-		if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx) {
-			if (!PortFound || pAC->Rlmt.Port[i].BcTimeStamp > BcTimeStamp) {
-				BcTimeStamp = pAC->Rlmt.Port[i].BcTimeStamp;
-				*pSelect = i;
-				PortFound = SK_TRUE;
-			}
-		}
-	}
-
-	if (PortFound) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Port %d received the last broadcast.\n", *pSelect))
-
-		/* Look if another port's time stamp is similar. */
-		for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-			if (i == *pSelect) {
-				continue;
-			}
-			if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx &&
-				(pAC->Rlmt.Port[i].BcTimeStamp >
-				 BcTimeStamp - SK_RLMT_BC_DELTA ||
-				pAC->Rlmt.Port[i].BcTimeStamp +
-				 SK_RLMT_BC_DELTA > BcTimeStamp)) {
-				PortFound = SK_FALSE;
-				
-				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-					("Port %d received a broadcast at a similar time.\n", i))
-				break;
-			}
-		}
-	}
-
-#ifdef DEBUG
-	if (PortFound) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SELECT_BCRX found Port %d receiving the substantially "
-			 "latest broadcast (%u).\n",
-				*pSelect,
-				BcTimeStamp - pAC->Rlmt.Port[1 - *pSelect].BcTimeStamp))
-	}
-#endif	/* DEBUG */
-
-	return (PortFound);
-}	/* SkRlmtSelectBcRx */
-
-
-/******************************************************************************
- *
- *	SkRlmtSelectNotSuspect - select new active port, criteria 2 (CLP)
- *
- * Description:
- *	This routine selects a good port (it is PortUp && !SuspectRx).
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	SK_BOOL
- */
-RLMT_STATIC SK_BOOL	SkRlmtSelectNotSuspect(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-SK_U32	Active,		/* Active port */
-SK_U32	PrefPort,	/* Preferred port */
-SK_U32	*pSelect)	/* New active port */
-{
-	SK_U32		i;
-	SK_BOOL		PortFound;
-
-	PortFound = SK_FALSE;
-
-	/* Select first port that is PortUp && !SuspectRx. */
-	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-		if (!pAC->Rlmt.Port[i].PortDown &&
-			!(pAC->Rlmt.Port[i].CheckingState & SK_RLMT_PCS_RX)) {
-			*pSelect = i;
-			if (!pAC->Rlmt.Port[Active].PortDown &&
-				!(pAC->Rlmt.Port[Active].CheckingState & SK_RLMT_PCS_RX)) {
-				*pSelect = Active;
-			}
-			if (!pAC->Rlmt.Port[PrefPort].PortDown &&
-				!(pAC->Rlmt.Port[PrefPort].CheckingState & SK_RLMT_PCS_RX)) {
-				*pSelect = PrefPort;
-			}
-			PortFound = SK_TRUE;
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-				("SK_RLMT_SELECT_NOTSUSPECT found Port %d up and not check RX.\n",
-					*pSelect))
-			break;
-		}
-	}
-	return (PortFound);
-}	/* SkRlmtSelectNotSuspect */
-
-
-/******************************************************************************
- *
- *	SkRlmtSelectUp - select new active port, criteria 3, 4 (CLP)
- *
- * Description:
- *	This routine selects a port that is up.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	SK_BOOL
- */
-RLMT_STATIC SK_BOOL	SkRlmtSelectUp(
-SK_AC	*pAC,			/* Adapter Context */
-SK_IOC	IoC,			/* I/O Context */
-SK_U32	Active,			/* Active port */
-SK_U32	PrefPort,		/* Preferred port */
-SK_U32	*pSelect,		/* New active port */
-SK_BOOL	AutoNegDone)	/* Successfully auto-negotiated? */
-{
-	SK_U32		i;
-	SK_BOOL		PortFound;
-
-	PortFound = SK_FALSE;
-
-	/* Select first port that is PortUp. */
-	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_UP &&
-			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
-			*pSelect = i;
-			if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_UP &&
-				pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) {
-				*pSelect = Active;
-			}
-			if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_UP &&
-				pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) {
-				*pSelect = PrefPort;
-			}
-			PortFound = SK_TRUE;
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-				("SK_RLMT_SELECT_UP found Port %d up.\n", *pSelect))
-			break;
-		}
-	}
-	return (PortFound);
-}	/* SkRlmtSelectUp */
-
-
-/******************************************************************************
- *
- *	SkRlmtSelectGoingUp - select new active port, criteria 5, 6 (CLP)
- *
- * Description:
- *	This routine selects the port that is going up for the longest time.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	SK_BOOL
- */
-RLMT_STATIC SK_BOOL	SkRlmtSelectGoingUp(
-SK_AC	*pAC,			/* Adapter Context */
-SK_IOC	IoC,			/* I/O Context */
-SK_U32	Active,			/* Active port */
-SK_U32	PrefPort,		/* Preferred port */
-SK_U32	*pSelect,		/* New active port */
-SK_BOOL	AutoNegDone)	/* Successfully auto-negotiated? */
-{
-	SK_U64		GuTimeStamp;
-	SK_U32		i;
-	SK_BOOL		PortFound;
-
-	GuTimeStamp = 0;
-	PortFound = SK_FALSE;
-
-	/* Select port that is PortGoingUp for the longest time. */
-	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP &&
-			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
-			GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp;
-			*pSelect = i;
-			PortFound = SK_TRUE;
-			break;
-		}
-	}
-
-	if (!PortFound) {
-		return (SK_FALSE);
-	}
-
-	for (i = *pSelect + 1; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP &&
-			pAC->Rlmt.Port[i].GuTimeStamp < GuTimeStamp &&
-			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
-			GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp;
-			*pSelect = i;
-		}
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_SELECT_GOINGUP found Port %d going up.\n", *pSelect))
-	return (SK_TRUE);
-}	/* SkRlmtSelectGoingUp */
-
-
-/******************************************************************************
- *
- *	SkRlmtSelectDown - select new active port, criteria 7, 8 (CLP)
- *
- * Description:
- *	This routine selects a port that is down.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	SK_BOOL
- */
-RLMT_STATIC SK_BOOL	SkRlmtSelectDown(
-SK_AC	*pAC,			/* Adapter Context */
-SK_IOC	IoC,			/* I/O Context */
-SK_U32	Active,			/* Active port */
-SK_U32	PrefPort,		/* Preferred port */
-SK_U32	*pSelect,		/* New active port */
-SK_BOOL	AutoNegDone)	/* Successfully auto-negotiated? */
-{
-	SK_U32		i;
-	SK_BOOL		PortFound;
-
-	PortFound = SK_FALSE;
-
-	/* Select first port that is PortDown. */
-	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-		if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_DOWN &&
-			pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) {
-			*pSelect = i;
-			if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_DOWN &&
-				pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) {
-				*pSelect = Active;
-			}
-			if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_DOWN &&
-				pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) {
-				*pSelect = PrefPort;
-			}
-			PortFound = SK_TRUE;
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-				("SK_RLMT_SELECT_DOWN found Port %d down.\n", *pSelect))
-			break;
-		}
-	}
-	return (PortFound);
-}	/* SkRlmtSelectDown */
-
-
-/******************************************************************************
- *
- *	SkRlmtCheckSwitch - select new active port and switch to it
- *
- * Description:
- *	This routine decides which port should be the active one and queues
- *	port switching if necessary.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	Nothing.
- */
-RLMT_STATIC void	SkRlmtCheckSwitch(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* I/O Context */
-SK_U32	NetIdx)	/* Net index */
-{
-	SK_EVPARA	Para;
-	SK_U32		Active;
-	SK_U32		PrefPort;
-	SK_U32		i;
-	SK_BOOL		PortFound;
-
-	Active = pAC->Rlmt.Net[NetIdx].ActivePort;	/* Index of active port. */
-	PrefPort = pAC->Rlmt.Net[NetIdx].PrefPort;	/* Index of preferred port. */
-	PortFound = SK_FALSE;
-	pAC->Rlmt.CheckSwitch = SK_FALSE;
-
-#if 0	/* RW 2001/10/18 - active port becomes always prefered one */
-	if (pAC->Rlmt.Net[NetIdx].Preference == 0xFFFFFFFF) { /* Automatic */
-		/* disable auto-fail back */
-		PrefPort = Active;
-	}
-#endif
-
-	if (pAC->Rlmt.Net[NetIdx].LinksUp == 0) {
-		/* Last link went down - shut down the net. */
-		pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_DOWN;
-		Para.Para32[0] = SK_RLMT_NET_DOWN_TEMP;
-		Para.Para32[1] = NetIdx;
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para);
-
-		Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
-			Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber;
-		Para.Para32[1] = NetIdx;
-		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para);
-		return;
-	}	/* pAC->Rlmt.LinksUp == 0 */
-	else if (pAC->Rlmt.Net[NetIdx].LinksUp == 1 &&
-		pAC->Rlmt.Net[NetIdx].RlmtState == SK_RLMT_RS_NET_DOWN) {
-		/* First link came up - get the net up. */
-		pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_UP;
-
-		/*
-		 * If pAC->Rlmt.ActivePort != Para.Para32[0],
-		 * the DRV switches to the port that came up.
-		 */
-		for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) {
-			if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) {
-				if (!pAC->Rlmt.Net[NetIdx].Port[Active]->LinkDown) {
-					i = Active;
-				}
-				if (!pAC->Rlmt.Net[NetIdx].Port[PrefPort]->LinkDown) {
-					i = PrefPort;
-				}
-				PortFound = SK_TRUE;
-				break;
-			}
-		}
-
-		if (PortFound) {
-			Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber;
-			Para.Para32[1] = NetIdx;
-			SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para);
-
-			pAC->Rlmt.Net[NetIdx].ActivePort = i;
-			Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber;
-			Para.Para32[1] = NetIdx;
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_UP, Para);
-
-			if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
-				(Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC,
-				pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber,
-				SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].
-				CurrentMacAddress, &SkRlmtMcAddr)) != NULL) {
-				/*
-				 * Send announce packet to RLMT multicast address to force
-				 * switches to learn the new location of the logical MAC address.
-				 */
-				SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-			}
-		}
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E007, SKERR_RLMT_E007_MSG);
-		}
-
-		return;
-	}	/* LinksUp == 1 && RlmtState == SK_RLMT_RS_NET_DOWN */
-	else {	/* Cannot be reached in dual-net mode. */
-		Para.Para32[0] = Active;
-
-		/*
-		 * Preselection:
-		 *	If RLMT Mode != CheckLinkState
-		 *		select port that received a broadcast frame substantially later
-		 *		than all other ports
-		 *	else select first port that is not SuspectRx
-		 *	else select first port that is PortUp
-		 *	else select port that is PortGoingUp for the longest time
-		 *	else select first port that is PortDown
-		 *	else stop.
-		 *
-		 * For the preselected port:
-		 *	If ActivePort is equal in quality, select ActivePort.
-		 *
-		 *	If PrefPort is equal in quality, select PrefPort.
-		 *
-		 *	If ActivePort != SelectedPort,
-		 *		If old ActivePort is LinkDown,
-		 *			SwitchHard
-		 *		else
-		 *			SwitchSoft
-		 */
-		/* check of ChgBcPrio flag added */
-		if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) &&
-			(!pAC->Rlmt.Net[0].ChgBcPrio)) {
-			
-			if (!PortFound) {
-				PortFound = SkRlmtSelectBcRx(
-					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
-			}
-
-			if (!PortFound) {
-				PortFound = SkRlmtSelectNotSuspect(
-					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
-			}
-		}	/* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
-
-		/* with changed priority for last broadcast received */
-		if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) &&
-			(pAC->Rlmt.Net[0].ChgBcPrio)) {
-			if (!PortFound) {
-				PortFound = SkRlmtSelectNotSuspect(
-					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
-			}
-
-			if (!PortFound) {
-				PortFound = SkRlmtSelectBcRx(
-					pAC, IoC, Active, PrefPort, &Para.Para32[1]);
-			}
-		}	/* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
-
-		if (!PortFound) {
-			PortFound = SkRlmtSelectUp(
-				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
-		}
-
-		if (!PortFound) {
-			PortFound = SkRlmtSelectUp(
-				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
-		}
-
-		if (!PortFound) {
-			PortFound = SkRlmtSelectGoingUp(
-				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
-		}
-
-		if (!PortFound) {
-			PortFound = SkRlmtSelectGoingUp(
-				pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
-		}
-
-		if (pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) {
-			if (!PortFound) {
-				PortFound = SkRlmtSelectDown(pAC, IoC,
-					Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS);
-			}
-
-			if (!PortFound) {
-				PortFound = SkRlmtSelectDown(pAC, IoC,
-					Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED);
-			}
-		}	/* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */
-
-		if (PortFound) {
-
-			if (Para.Para32[1] != Active) {
-				SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-					("Active: %d, Para1: %d.\n", Active, Para.Para32[1]))
-				pAC->Rlmt.Net[NetIdx].ActivePort = Para.Para32[1];
-				Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
-					Port[Para.Para32[0]]->PortNumber;
-				Para.Para32[1] = pAC->Rlmt.Net[NetIdx].
-					Port[Para.Para32[1]]->PortNumber;
-				SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[1], SK_LED_ACTIVE);
-				if (pAC->Rlmt.Port[Active].LinkDown) {
-					SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_HARD, Para);
-				}
-				else {
-					SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY);
-					SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_SOFT, Para);
-				}
-				Para.Para32[1] = NetIdx;
-				Para.Para32[0] =
-					pAC->Rlmt.Net[NetIdx].Port[Para.Para32[0]]->PortNumber;
-				SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para);
-				Para.Para32[0] = pAC->Rlmt.Net[NetIdx].
-					Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber;
-				SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para);
-				if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
-					(Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, Para.Para32[0],
-					SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].CurrentMacAddress,
-					&SkRlmtMcAddr)) != NULL) {
-					/*
-					 * Send announce packet to RLMT multicast address to force
-					 * switches to learn the new location of the logical
-					 * MAC address.
-					 */
-					SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para);
-				}	/* (Para.pParaPtr = SkRlmtBuildPacket(...)) != NULL */
-			}	/* Para.Para32[1] != Active */
-		}	/* PortFound */
-		else {
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E004, SKERR_RLMT_E004_MSG);
-		}
-	}	/* LinksUp > 1 || LinksUp == 1 && RlmtState != SK_RLMT_RS_NET_DOWN */
-	return;
-}	/* SkRlmtCheckSwitch */
-
-
-/******************************************************************************
- *
- *	SkRlmtCheckSeg - Report if segmentation is detected
- *
- * Description:
- *	This routine checks if the ports see different root bridges and reports
- *	segmentation in such a case.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	Nothing.
- */
-RLMT_STATIC void	SkRlmtCheckSeg(
-SK_AC	*pAC,	/* Adapter Context */
-SK_IOC	IoC,	/* I/O Context */
-SK_U32	NetIdx)	/* Net number */
-{
-	SK_EVPARA	Para;
-	SK_RLMT_NET	*pNet;
-	SK_U32		i, j;
-	SK_BOOL		Equal;
-
-	pNet = &pAC->Rlmt.Net[NetIdx];
-	pNet->RootIdSet = SK_FALSE;
-	Equal = SK_TRUE;
-
-	for (i = 0; i < pNet->NumPorts; i++) {
-		if (pNet->Port[i]->LinkDown || !pNet->Port[i]->RootIdSet) {
-			continue;
-		}
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP,
-			("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", i,
-				pNet->Port[i]->Root.Id[0], pNet->Port[i]->Root.Id[1],
-				pNet->Port[i]->Root.Id[2], pNet->Port[i]->Root.Id[3],
-				pNet->Port[i]->Root.Id[4], pNet->Port[i]->Root.Id[5],
-				pNet->Port[i]->Root.Id[6], pNet->Port[i]->Root.Id[7]))
-
-		if (!pNet->RootIdSet) {
-			pNet->Root = pNet->Port[i]->Root;
-			pNet->RootIdSet = SK_TRUE;
-			continue;
-		}
-
-		for (j = 0; j < 8; j ++) {
-			Equal &= pNet->Port[i]->Root.Id[j] == pNet->Root.Id[j];
-			if (!Equal) {
-				break;
-			}
-		}
-		
-		if (!Equal) {
-			SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E005, SKERR_RLMT_E005_MSG);
-			Para.Para32[0] = NetIdx;
-			Para.Para32[1] = (SK_U32)-1;
-			SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SEGMENTATION, Para);
-
-			pNet->CheckingState &= ~SK_RLMT_RCS_REPORT_SEG;
-
-			/* 2000-03-06 RA: New. */
-			Para.Para32[0] = NetIdx;
-			Para.Para32[1] = (SK_U32)-1;
-			SkTimerStart(pAC, IoC, &pNet->SegTimer, SK_RLMT_SEG_TO_VAL,
-				SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
-			break;
-		}
-	}	/* for (i = 0; i < pNet->NumPorts; i++) */
-
-	/* 2000-03-06 RA: Moved here. */
-	/* Segmentation check not running anymore. */
-	pNet->CheckingState &= ~SK_RLMT_RCS_SEG;
-
-}	/* SkRlmtCheckSeg */
-
-
-/******************************************************************************
- *
- *	SkRlmtPortStart - initialize port variables and start port
- *
- * Description:
- *	This routine initializes a port's variables and issues a PORT_START
- *	to the HWAC module.  This handles retries if the start fails or the
- *	link eventually goes down.
- *
- * Context:
- *	runtime, pageable?
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtPortStart(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-SK_U32	PortNumber)	/* Port number */
-{
-	SK_EVPARA	Para;
-
-	pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_LINK_DOWN;
-	pAC->Rlmt.Port[PortNumber].PortStarted = SK_TRUE;
-	pAC->Rlmt.Port[PortNumber].LinkDown = SK_TRUE;
-	pAC->Rlmt.Port[PortNumber].PortDown = SK_TRUE;
-	pAC->Rlmt.Port[PortNumber].CheckingState = 0;
-	pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE;
-	Para.Para32[0] = PortNumber;
-	Para.Para32[1] = (SK_U32)-1;
-	SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
-}	/* SkRlmtPortStart */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtPortStartTim - PORT_START_TIM
- *
- * Description:
- *	This routine handles PORT_START_TIM events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtPortStartTim(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
-{
-	SK_U32			i;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PORTSTART_TIMEOUT Port %d Event BEGIN.\n", Para.Para32[0]))
-
-		if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PORTSTART_TIMEOUT Event EMPTY.\n"))
-		return;
-	}
-
-	/*
-	 * Used to start non-preferred ports if the preferred one
-	 * does not come up.
-	 * This timeout needs only be set when starting the first
-	 * (preferred) port.
-	 */
-	if (pAC->Rlmt.Port[Para.Para32[0]].LinkDown) {
-		/* PORT_START failed. */
-		for (i = 0; i < pAC->Rlmt.Port[Para.Para32[0]].Net->NumPorts; i++) {
-			if (!pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortStarted) {
-				SkRlmtPortStart(pAC, IoC,
-					pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortNumber);
-			}
-		}
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PORTSTART_TIMEOUT Event END.\n"))
-}	/* SkRlmtEvtPortStartTim */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtLinkUp - LINK_UP
- *
- * Description:
- *	This routine handles LLINK_UP events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtLinkUp(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 Undefined */
-{
-	SK_U32			i;
-	SK_RLMT_PORT	*pRPort;
-	SK_EVPARA		Para2;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_LINK_UP Port %d Event BEGIN.\n", Para.Para32[0]))
-
-	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
-	if (!pRPort->PortStarted) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E008, SKERR_RLMT_E008_MSG);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-				("SK_RLMT_LINK_UP Event EMPTY.\n"))
-		return;
-	}
-
-	if (!pRPort->LinkDown) {
-		/* RA;:;: Any better solution? */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_LINK_UP Event EMPTY.\n"))
-		return;
-	}
-
-	SkTimerStop(pAC, IoC, &pRPort->UpTimer);
-	SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
-	SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
-
-	/* Do something if timer already fired? */
-
-	pRPort->LinkDown = SK_FALSE;
-	pRPort->PortState = SK_RLMT_PS_GOING_UP;
-	pRPort->GuTimeStamp = SkOsGetTime(pAC);
-	pRPort->BcTimeStamp = 0;
-	pRPort->Net->LinksUp++;
-	if (pRPort->Net->LinksUp == 1) {
-		SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_ACTIVE);
-	}
-	else {
-		SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY);
-	}
-
-	for (i = 0; i < pRPort->Net->NumPorts; i++) {
-		if (!pRPort->Net->Port[i]->PortStarted) {
-			SkRlmtPortStart(pAC, IoC, pRPort->Net->Port[i]->PortNumber);
-		}
-	}
-
-	SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
-
-	if (pRPort->Net->LinksUp >= 2) {
-		if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) {
-			/* Build the check chain. */
-			SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
-		}
-	}
-
-	/* If the first link comes up, start the periodical RLMT timeout. */
-	if (pRPort->Net->NumPorts > 1 && pRPort->Net->LinksUp == 1 &&
-		(pRPort->Net->RlmtMode & SK_RLMT_CHECK_OTHERS) != 0) {
-		Para2.Para32[0] = pRPort->Net->NetNumber;
-		Para2.Para32[1] = (SK_U32)-1;
-		SkTimerStart(pAC, IoC, &pRPort->Net->LocTimer,
-			pRPort->Net->TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, Para2);
-	}
-
-	Para2 = Para;
-	Para2.Para32[1] = (SK_U32)-1;
-	SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL,
-		SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para2);
-	
-	/* Later: if (pAC->Rlmt.RlmtMode & SK_RLMT_CHECK_LOC_LINK) && */
-	if ((pRPort->Net->RlmtMode & SK_RLMT_TRANSPARENT) == 0 &&
-		(pRPort->Net->RlmtMode & SK_RLMT_CHECK_LINK) != 0 &&
-		(Para2.pParaPtr =
-			SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], SK_PACKET_ANNOUNCE,
-			&pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress, &SkRlmtMcAddr)
-		) != NULL) {
-		/* Send "new" packet to RLMT multicast address. */
-		SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
-	}
-
-	if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_SEG) {
-		if ((Para2.pParaPtr =
-			SkRlmtBuildSpanningTreePacket(pAC, IoC, Para.Para32[0])) != NULL) {
-			pAC->Rlmt.Port[Para.Para32[0]].RootIdSet = SK_FALSE;
-			pRPort->Net->CheckingState |=
-				SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG;
-
-			SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
-
-			Para.Para32[1] = (SK_U32)-1;
-			SkTimerStart(pAC, IoC, &pRPort->Net->SegTimer,
-				SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
-		}
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_LINK_UP Event END.\n"))
-}	/* SkRlmtEvtLinkUp */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtPortUpTim - PORT_UP_TIM
- *
- * Description:
- *	This routine handles PORT_UP_TIM events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtPortUpTim(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
-{
-	SK_RLMT_PORT	*pRPort;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PORTUP_TIM Port %d Event BEGIN.\n", Para.Para32[0]))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PORTUP_TIM Event EMPTY.\n"))
-		return;
-	}
-
-	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
-	if (pRPort->LinkDown || (pRPort->PortState == SK_RLMT_PS_UP)) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PORTUP_TIM Port %d Event EMPTY.\n", Para.Para32[0]))
-		return;
-	}
-
-	pRPort->PortDown = SK_FALSE;
-	pRPort->PortState = SK_RLMT_PS_UP;
-	pRPort->Net->PortsUp++;
-	if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) {
-		if (pAC->Rlmt.NumNets <= 1) {
-			SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
-		}
-		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_UP, Para);
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PORTUP_TIM Event END.\n"))
-}	/* SkRlmtEvtPortUpTim */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtPortDownTim - PORT_DOWN_*
- *
- * Description:
- *	This routine handles PORT_DOWN_* events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtPortDownX(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_U32		Event,	/* Event code */
-SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
-{
-	SK_RLMT_PORT	*pRPort;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PORTDOWN* Port %d Event (%d) BEGIN.\n",
-			Para.Para32[0], Event))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PORTDOWN* Event EMPTY.\n"))
-		return;
-	}
-
-	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
-	if (!pRPort->PortStarted || (Event == SK_RLMT_PORTDOWN_TX_TIM &&
-		!(pRPort->CheckingState & SK_RLMT_PCS_TX))) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PORTDOWN* Event (%d) EMPTY.\n", Event))
-		return;
-	}
-	
-	/* Stop port's timers. */
-	SkTimerStop(pAC, IoC, &pRPort->UpTimer);
-	SkTimerStop(pAC, IoC, &pRPort->DownRxTimer);
-	SkTimerStop(pAC, IoC, &pRPort->DownTxTimer);
-
-	if (pRPort->PortState != SK_RLMT_PS_LINK_DOWN) {
-		pRPort->PortState = SK_RLMT_PS_DOWN;
-	}
-
-	if (!pRPort->PortDown) {
-		pRPort->Net->PortsUp--;
-		pRPort->PortDown = SK_TRUE;
-		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_DOWN, Para);
-	}
-
-	pRPort->PacketsPerTimeSlot = 0;
-	/* pRPort->DataPacketsPerTimeSlot = 0; */
-	pRPort->BpduPacketsPerTimeSlot = 0;
-	pRPort->BcTimeStamp = 0;
-
-	/*
-	 * RA;:;: To be checked:
-	 * - actions at RLMT_STOP: We should not switch anymore.
-	 */
-	if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) {
-		if (Para.Para32[0] ==
-			pRPort->Net->Port[pRPort->Net->ActivePort]->PortNumber) {
-			/* Active Port went down. */
-			SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber);
-		}
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PORTDOWN* Event (%d) END.\n", Event))
-}	/* SkRlmtEvtPortDownX */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtLinkDown - LINK_DOWN
- *
- * Description:
- *	This routine handles LINK_DOWN events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtLinkDown(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 Undefined */
-{
-	SK_RLMT_PORT	*pRPort;
-
-	pRPort = &pAC->Rlmt.Port[Para.Para32[0]];
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_LINK_DOWN Port %d Event BEGIN.\n", Para.Para32[0]))
-
-	if (!pAC->Rlmt.Port[Para.Para32[0]].LinkDown) {
-		pRPort->Net->LinksUp--;
-		pRPort->LinkDown = SK_TRUE;
-		pRPort->PortState = SK_RLMT_PS_LINK_DOWN;
-		SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_OFF);
-
-		if ((pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) != 0) {
-			/* Build the check chain. */
-			SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber);
-		}
-
-		/* Ensure that port is marked down. */
-		Para.Para32[1] = -1;
-		(void)SkRlmtEvent(pAC, IoC, SK_RLMT_PORTDOWN, Para);
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_LINK_DOWN Event END.\n"))
-}	/* SkRlmtEvtLinkDown */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtPortAddr - PORT_ADDR
- *
- * Description:
- *	This routine handles PORT_ADDR events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtPortAddr(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 PortNumber; SK_U32 -1 */
-{
-	SK_U32			i, j;
-	SK_RLMT_PORT	*pRPort;
-	SK_MAC_ADDR		*pOldMacAddr;
-	SK_MAC_ADDR		*pNewMacAddr;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PORT_ADDR Port %d Event BEGIN.\n", Para.Para32[0]))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PORT_ADDR Event EMPTY.\n"))
-		return;
-	}
-
-	/* Port's physical MAC address changed. */
-	pOldMacAddr = &pAC->Addr.Port[Para.Para32[0]].PreviousMacAddress;
-	pNewMacAddr = &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress;
-
-	/*
-	 * NOTE: This is not scalable for solutions where ports are
-	 *	 checked remotely.  There, we need to send an RLMT
-	 *	 address change packet - and how do we ensure delivery?
-	 */
-	for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) {
-		pRPort = &pAC->Rlmt.Port[i];
-		for (j = 0; j < pRPort->PortsChecked; j++) {
-			if (SK_ADDR_EQUAL(
-				pRPort->PortCheck[j].CheckAddr.a, pOldMacAddr->a)) {
-				pRPort->PortCheck[j].CheckAddr = *pNewMacAddr;
-			}
-		}
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PORT_ADDR Event END.\n"))
-}	/* SkRlmtEvtPortAddr */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtStart - START
- *
- * Description:
- *	This routine handles START events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtStart(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
-{
-	SK_EVPARA	Para2;
-	SK_U32		PortIdx;
-	SK_U32		PortNumber;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_START Net %d Event BEGIN.\n", Para.Para32[0]))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_START Event EMPTY.\n"))
-		return;
-	}
-
-	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad NetNumber %d.\n", Para.Para32[0]))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_START Event EMPTY.\n"))
-		return;
-	}
-
-	if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState != SK_RLMT_RS_INIT) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_START Event EMPTY.\n"))
-		return;
-	}
-
-	if (pAC->Rlmt.NetsStarted >= pAC->Rlmt.NumNets) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("All nets should have been started.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_START Event EMPTY.\n"))
-		return;
-	}
-
-	if (pAC->Rlmt.Net[Para.Para32[0]].PrefPort >=
-		pAC->Rlmt.Net[Para.Para32[0]].NumPorts) {
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E009, SKERR_RLMT_E009_MSG);
-
-		/* Change PrefPort to internal default. */
-		Para2.Para32[0] = 0xFFFFFFFF;
-		Para2.Para32[1] = Para.Para32[0];
-		(void)SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, Para2);
-	}
-
-	PortIdx = pAC->Rlmt.Net[Para.Para32[0]].PrefPort;
-	PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[PortIdx]->PortNumber;
-
-	pAC->Rlmt.Net[Para.Para32[0]].LinksUp = 0;
-	pAC->Rlmt.Net[Para.Para32[0]].PortsUp = 0;
-	pAC->Rlmt.Net[Para.Para32[0]].CheckingState = 0;
-	pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_NET_DOWN;
-
-	/* Start preferred port. */
-	SkRlmtPortStart(pAC, IoC, PortNumber);
-
-	/* Start Timer (for first port only). */
-	Para2.Para32[0] = PortNumber;
-	Para2.Para32[1] = (SK_U32)-1;
-	SkTimerStart(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer,
-		SK_RLMT_PORTSTART_TIM_VAL, SKGE_RLMT, SK_RLMT_PORTSTART_TIM, Para2);
-
-	pAC->Rlmt.NetsStarted++;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_START Event END.\n"))
-}	/* SkRlmtEvtStart */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtStop - STOP
- *
- * Description:
- *	This routine handles STOP events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtStop(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
-{
-	SK_EVPARA	Para2;
-	SK_U32		PortNumber;
-	SK_U32		i;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_STOP Net %d Event BEGIN.\n", Para.Para32[0]))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STOP Event EMPTY.\n"))
-		return;
-	}
-
-	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad NetNumber %d.\n", Para.Para32[0]))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STOP Event EMPTY.\n"))
-		return;
-	}
-
-	if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState == SK_RLMT_RS_INIT) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STOP Event EMPTY.\n"))
-		return;
-	}
-
-	if (pAC->Rlmt.NetsStarted == 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("All nets are stopped.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STOP Event EMPTY.\n"))
-		return;
-	}
-
-	/* Stop RLMT timers. */
-	SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer);
-	SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer);
-
-	/* Stop net. */
-	pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_INIT;
-	pAC->Rlmt.Net[Para.Para32[0]].RootIdSet = SK_FALSE;
-	Para2.Para32[0] = SK_RLMT_NET_DOWN_FINAL;
-	Para2.Para32[1] = Para.Para32[0];			/* Net# */
-	SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para2);
-
-	/* Stop ports. */
-	for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
-		PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber;
-		if (pAC->Rlmt.Port[PortNumber].PortState != SK_RLMT_PS_INIT) {
-			SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer);
-			SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownRxTimer);
-			SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownTxTimer);
-
-			pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_INIT;
-			pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE;
-			pAC->Rlmt.Port[PortNumber].PortStarted = SK_FALSE;
-			Para2.Para32[0] = PortNumber;
-			Para2.Para32[1] = (SK_U32)-1;
-			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para2);
-		}
-	}
-
-	pAC->Rlmt.NetsStarted--;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_STOP Event END.\n"))
-}	/* SkRlmtEvtStop */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtTim - TIM
- *
- * Description:
- *	This routine handles TIM events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtTim(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
-{
-	SK_RLMT_PORT	*pRPort;
-	SK_U32			Timeout;
-	SK_U32			NewTimeout;
-	SK_U32			PortNumber;
-	SK_U32			i;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_TIM Event BEGIN.\n"))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_TIM Event EMPTY.\n"))
-		return;
-	}
-
-	if ((pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_OTHERS) == 0 ||
-		pAC->Rlmt.Net[Para.Para32[0]].LinksUp == 0) {
-		/* Mode changed or all links down: No more link checking. */
-		return;
-	}
-
-#if 0
-	pAC->Rlmt.SwitchCheckCounter--;
-	if (pAC->Rlmt.SwitchCheckCounter == 0) {
-		pAC->Rlmt.SwitchCheckCounter;
-	}
-#endif	/* 0 */
-
-	NewTimeout = SK_RLMT_DEF_TO_VAL;
-	for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
-		PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber;
-		pRPort = &pAC->Rlmt.Port[PortNumber];
-		if (!pRPort->LinkDown) {
-			Timeout = SkRlmtCheckPort(pAC, IoC, PortNumber);
-			if (Timeout < NewTimeout) {
-				NewTimeout = Timeout;
-			}
-
-			/*
-			 * These counters should be set to 0 for all ports before the
-			 * first frame is sent in the next loop.
-			 */
-			pRPort->PacketsPerTimeSlot = 0;
-			/* pRPort->DataPacketsPerTimeSlot = 0; */
-			pRPort->BpduPacketsPerTimeSlot = 0;
-		}
-	}
-	pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue = NewTimeout;
-
-	if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1) {
-		/*
-		 * If checking remote ports, also send packets if
-		 *   (LinksUp == 1) &&
-		 *   this port checks at least one (remote) port.
-		 */
-
-		/*
-		 * Must be new loop, as SkRlmtCheckPort can request to
-		 * check segmentation when e.g. checking the last port.
-		 */
-		for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
-			if (!pAC->Rlmt.Net[Para.Para32[0]].Port[i]->LinkDown) {
-				SkRlmtSend(pAC, IoC,
-					pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber);
-			}
-		}
-	}
-
-	SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer,
-		pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue, SKGE_RLMT, SK_RLMT_TIM,
-		Para);
-
-	if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1 &&
-		(pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_SEG) &&
-		(pAC->Rlmt.Net[Para.Para32[0]].CheckingState & SK_RLMT_RCS_START_SEG)) {
-		SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer,
-			SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para);
-		pAC->Rlmt.Net[Para.Para32[0]].CheckingState &= ~SK_RLMT_RCS_START_SEG;
-		pAC->Rlmt.Net[Para.Para32[0]].CheckingState |=
-			SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_TIM Event END.\n"))
-}	/* SkRlmtEvtTim */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtSegTim - SEG_TIM
- *
- * Description:
- *	This routine handles SEG_TIM events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtSegTim(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
-{
-#ifdef xDEBUG
-	int j;
-#endif	/* DEBUG */
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_SEG_TIM Event BEGIN.\n"))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SEG_TIM Event EMPTY.\n"))
-		return;
-	}
-
-#ifdef xDEBUG
-	for (j = 0; j < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; j++) {
-		SK_ADDR_PORT	*pAPort;
-		SK_U32			k;
-		SK_U16			*InAddr;
-		SK_U8			InAddr8[6];
-
-		InAddr = (SK_U16 *)&InAddr8[0];
-		pAPort = pAC->Rlmt.Net[Para.Para32[0]].Port[j]->AddrPort;
-		for (k = 0; k < pAPort->NextExactMatchRlmt; k++) {
-			/* Get exact match address k from port j. */
-			XM_INADDR(IoC, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber,
-				XM_EXM(k), InAddr);
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-				("MC address %d on Port %u: %02x %02x %02x %02x %02x %02x --  %02x %02x %02x %02x %02x %02x.\n",
-					k, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber,
-					InAddr8[0], InAddr8[1], InAddr8[2],
-					InAddr8[3], InAddr8[4], InAddr8[5],
-					pAPort->Exact[k].a[0], pAPort->Exact[k].a[1],
-					pAPort->Exact[k].a[2], pAPort->Exact[k].a[3],
-					pAPort->Exact[k].a[4], pAPort->Exact[k].a[5]))
-		}
-	}
-#endif	/* xDEBUG */
-				
-	SkRlmtCheckSeg(pAC, IoC, Para.Para32[0]);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SEG_TIM Event END.\n"))
-}	/* SkRlmtEvtSegTim */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtPacketRx - PACKET_RECEIVED
- *
- * Description:
- *	This routine handles PACKET_RECEIVED events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtPacketRx(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_MBUF *pMb */
-{
-	SK_MBUF	*pMb;
-	SK_MBUF	*pNextMb;
-	SK_U32	NetNumber;
-
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PACKET_RECEIVED Event BEGIN.\n"))
-
-	/* Should we ignore frames during port switching? */
-
-#ifdef DEBUG
-	pMb = Para.pParaPtr;
-	if (pMb == NULL) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("No mbuf.\n"))
-	}
-	else if (pMb->pNext != NULL) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("More than one mbuf or pMb->pNext not set.\n"))
-	}
-#endif	/* DEBUG */
-
-	for (pMb = Para.pParaPtr; pMb != NULL; pMb = pNextMb) {
-		pNextMb = pMb->pNext;
-		pMb->pNext = NULL;
-
-		NetNumber = pAC->Rlmt.Port[pMb->PortIdx].Net->NetNumber;
-		if (pAC->Rlmt.Net[NetNumber].RlmtState == SK_RLMT_RS_INIT) {
-			SkDrvFreeRlmtMbuf(pAC, IoC, pMb);
-		}
-		else {
-			SkRlmtPacketReceive(pAC, IoC, pMb);
-		}
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PACKET_RECEIVED Event END.\n"))
-}	/* SkRlmtEvtPacketRx */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtStatsClear - STATS_CLEAR
- *
- * Description:
- *	This routine handles STATS_CLEAR events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtStatsClear(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
-{
-	SK_U32			i;
-	SK_RLMT_PORT	*pRPort;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_STATS_CLEAR Event BEGIN.\n"))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STATS_CLEAR Event EMPTY.\n"))
-		return;
-	}
-
-	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad NetNumber %d.\n", Para.Para32[0]))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STATS_CLEAR Event EMPTY.\n"))
-		return;
-	}
-
-	/* Clear statistics for logical and physical ports. */
-	for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) {
-		pRPort =
-			&pAC->Rlmt.Port[pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber];
-		pRPort->TxHelloCts = 0;
-		pRPort->RxHelloCts = 0;
-		pRPort->TxSpHelloReqCts = 0;
-		pRPort->RxSpHelloCts = 0;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_STATS_CLEAR Event END.\n"))
-}	/* SkRlmtEvtStatsClear */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtStatsUpdate - STATS_UPDATE
- *
- * Description:
- *	This routine handles STATS_UPDATE events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtStatsUpdate(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NetNumber; SK_U32 -1 */
-{
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_STATS_UPDATE Event BEGIN.\n"))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STATS_UPDATE Event EMPTY.\n"))
-		return;
-	}
-
-	if (Para.Para32[0] >= pAC->Rlmt.NumNets) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad NetNumber %d.\n", Para.Para32[0]))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_STATS_UPDATE Event EMPTY.\n"))
-		return;
-	}
-
-	/* Update statistics - currently always up-to-date. */
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_STATS_UPDATE Event END.\n"))
-}	/* SkRlmtEvtStatsUpdate */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtPrefportChange - PREFPORT_CHANGE
- *
- * Description:
- *	This routine handles PREFPORT_CHANGE events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtPrefportChange(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 PortIndex; SK_U32 NetNumber */
-{
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PREFPORT_CHANGE to Port %d Event BEGIN.\n", Para.Para32[0]))
-
-	if (Para.Para32[1] >= pAC->Rlmt.NumNets) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad NetNumber %d.\n", Para.Para32[1]))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n"))
-		return;
-	}
-
-	/* 0xFFFFFFFF == auto-mode. */
-	if (Para.Para32[0] == 0xFFFFFFFF) {
-		pAC->Rlmt.Net[Para.Para32[1]].PrefPort = SK_RLMT_DEF_PREF_PORT;
-	}
-	else {
-		if (Para.Para32[0] >= pAC->Rlmt.Net[Para.Para32[1]].NumPorts) {
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E010, SKERR_RLMT_E010_MSG);
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-				("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n"))
-			return;
-		}
-
-		pAC->Rlmt.Net[Para.Para32[1]].PrefPort = Para.Para32[0];
-	}
-
-	pAC->Rlmt.Net[Para.Para32[1]].Preference = Para.Para32[0];
-
-	if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) {
-		SkRlmtCheckSwitch(pAC, IoC, Para.Para32[1]);
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_PREFPORT_CHANGE Event END.\n"))
-}	/* SkRlmtEvtPrefportChange */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtSetNets - SET_NETS
- *
- * Description:
- *	This routine handles SET_NETS events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtSetNets(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NumNets; SK_U32 -1 */
-{
-	int i;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_SET_NETS Event BEGIN.\n"))
-
-	if (Para.Para32[1] != (SK_U32)-1) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad Parameter.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SET_NETS Event EMPTY.\n"))
-		return;
-	}
-
-	if (Para.Para32[0] == 0 || Para.Para32[0] > SK_MAX_NETS ||
-		Para.Para32[0] > (SK_U32)pAC->GIni.GIMacsFound) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad number of nets: %d.\n", Para.Para32[0]))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SET_NETS Event EMPTY.\n"))
-		return;
-	}
-
-	if (Para.Para32[0] == pAC->Rlmt.NumNets) {	/* No change. */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SET_NETS Event EMPTY.\n"))
-		return;
-	}
-
-	/* Entering and leaving dual mode only allowed while nets are stopped. */
-	if (pAC->Rlmt.NetsStarted > 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Changing dual mode only allowed while all nets are stopped.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SET_NETS Event EMPTY.\n"))
-		return;
-	}
-
-	if (Para.Para32[0] == 1) {
-		if (pAC->Rlmt.NumNets > 1) {
-			/* Clear logical MAC addr from second net's active port. */
-			(void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr.
-				Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_CLEAR_LOGICAL);
-			pAC->Rlmt.Net[1].NumPorts = 0;
-		}
-
-		pAC->Rlmt.NumNets = Para.Para32[0];
-		for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) {
-			pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
-			pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
-			pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF;	  /* "Automatic" */
-			pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
-			/* Just assuming. */
-			pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
-			pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
-			pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
-			pAC->Rlmt.Net[i].NetNumber = i;
-		}
-
-		pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[0];
-		pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound;
-
-		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("RLMT: Changed to one net with two ports.\n"))
-	}
-	else if (Para.Para32[0] == 2) {
-		pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[1];
-		pAC->Rlmt.Net[1].NumPorts = pAC->GIni.GIMacsFound - 1;
-		pAC->Rlmt.Net[0].NumPorts =
-			pAC->GIni.GIMacsFound - pAC->Rlmt.Net[1].NumPorts;
-		
-		pAC->Rlmt.NumNets = Para.Para32[0];
-		for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) {
-			pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT;
-			pAC->Rlmt.Net[i].RootIdSet = SK_FALSE;
-			pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF;	  /* "Automatic" */
-			pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT;
-			/* Just assuming. */
-			pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort;
-			pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE;
-			pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL;
-
-			pAC->Rlmt.Net[i].NetNumber = i;
-		}
-
-		/* Set logical MAC addr on second net's active port. */
-		(void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr.
-			Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_SET_LOGICAL);
-
-		SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("RLMT: Changed to two nets with one port each.\n"))
-	}
-	else {
-		/* Not implemented for more than two nets. */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SetNets not implemented for more than two nets.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_SET_NETS Event EMPTY.\n"))
-		return;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_SET_NETS Event END.\n"))
-}	/* SkRlmtSetNets */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvtModeChange - MODE_CHANGE
- *
- * Description:
- *	This routine handles MODE_CHANGE events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	Nothing
- */
-RLMT_STATIC void	SkRlmtEvtModeChange(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_EVPARA	Para)	/* SK_U32 NewMode; SK_U32 NetNumber */
-{
-	SK_EVPARA	Para2;
-	SK_U32		i;
-	SK_U32		PrevRlmtMode;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-		("SK_RLMT_MODE_CHANGE Event BEGIN.\n"))
-
-	if (Para.Para32[1] >= pAC->Rlmt.NumNets) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Bad NetNumber %d.\n", Para.Para32[1]))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_MODE_CHANGE Event EMPTY.\n"))
-		return;
-	}
-
-	Para.Para32[0] |= SK_RLMT_CHECK_LINK;
-
-	if ((pAC->Rlmt.Net[Para.Para32[1]].NumPorts == 1) &&
-		Para.Para32[0] != SK_RLMT_MODE_CLS) {
-		pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = SK_RLMT_MODE_CLS;
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Forced RLMT mode to CLS on single port net.\n"))
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_MODE_CHANGE Event EMPTY.\n"))
-		return;
-	}
-
-	/* Update RLMT mode. */
-	PrevRlmtMode = pAC->Rlmt.Net[Para.Para32[1]].RlmtMode;
-	pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = Para.Para32[0];
-
-	if ((PrevRlmtMode & SK_RLMT_CHECK_LOC_LINK) !=
-		(pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) {
-		/* SK_RLMT_CHECK_LOC_LINK bit changed. */
-		if ((PrevRlmtMode & SK_RLMT_CHECK_OTHERS) == 0 &&
-			pAC->Rlmt.Net[Para.Para32[1]].NumPorts > 1 &&
-			pAC->Rlmt.Net[Para.Para32[1]].PortsUp >= 1) {
-			/* 20001207 RA: Was "PortsUp == 1". */
-			Para2.Para32[0] = Para.Para32[1];
-			Para2.Para32[1] = (SK_U32)-1;
-			SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].LocTimer,
-				pAC->Rlmt.Net[Para.Para32[1]].TimeoutValue,
-				SKGE_RLMT, SK_RLMT_TIM, Para2);
-		}
-	}
-
-	if ((PrevRlmtMode & SK_RLMT_CHECK_SEG) !=
-		(pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG)) {
-		/* SK_RLMT_CHECK_SEG bit changed. */
-		for (i = 0; i < pAC->Rlmt.Net[Para.Para32[1]].NumPorts; i++) {
-			(void)SkAddrMcClear(pAC, IoC,
-				pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
-				SK_ADDR_PERMANENT | SK_MC_SW_ONLY);
-
-			/* Add RLMT MC address. */
-			(void)SkAddrMcAdd(pAC, IoC,
-				pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
-				&SkRlmtMcAddr, SK_ADDR_PERMANENT);
-
-			if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode &
-				SK_RLMT_CHECK_SEG) != 0) {
-				/* Add BPDU MC address. */
-				(void)SkAddrMcAdd(pAC, IoC,
-					pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber,
-					&BridgeMcAddr, SK_ADDR_PERMANENT);
-
-				if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) {
-					if (!pAC->Rlmt.Net[Para.Para32[1]].Port[i]->LinkDown &&
-						(Para2.pParaPtr = SkRlmtBuildSpanningTreePacket(
-						pAC, IoC, i)) != NULL) {
-						pAC->Rlmt.Net[Para.Para32[1]].Port[i]->RootIdSet =
-							SK_FALSE;
-						SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2);
-					}
-				}
-			}
-			(void)SkAddrMcUpdate(pAC, IoC,
-				pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber);
-		}	/* for ... */
-
-		if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG) != 0) {
-			Para2.Para32[0] = Para.Para32[1];
-			Para2.Para32[1] = (SK_U32)-1;
-			SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].SegTimer,
-				SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para2);
-		}
-	}	/* SK_RLMT_CHECK_SEG bit changed. */
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("SK_RLMT_MODE_CHANGE Event END.\n"))
-}	/* SkRlmtEvtModeChange */
-
-
-/******************************************************************************
- *
- *	SkRlmtEvent - a PORT- or an RLMT-specific event happened
- *
- * Description:
- *	This routine calls subroutines to handle PORT- and RLMT-specific events.
- *
- * Context:
- *	runtime, pageable?
- *	may be called after SK_INIT_IO
- *
- * Returns:
- *	0
- */
-int	SkRlmtEvent(
-SK_AC		*pAC,	/* Adapter Context */
-SK_IOC		IoC,	/* I/O Context */
-SK_U32		Event,	/* Event code */
-SK_EVPARA	Para)	/* Event-specific parameter */
-{
-	switch (Event) {
-	
-	/* ----- PORT events ----- */
-
-	case SK_RLMT_PORTSTART_TIM:	/* From RLMT via TIME. */
-		SkRlmtEvtPortStartTim(pAC, IoC, Para);
-		break;
-	case SK_RLMT_LINK_UP:		/* From SIRQ. */
-		SkRlmtEvtLinkUp(pAC, IoC, Para);
-		break;
-	case SK_RLMT_PORTUP_TIM:	/* From RLMT via TIME. */
-		SkRlmtEvtPortUpTim(pAC, IoC, Para);
-		break;
-	case SK_RLMT_PORTDOWN:			/* From RLMT. */
-	case SK_RLMT_PORTDOWN_RX_TIM:	/* From RLMT via TIME. */
-	case SK_RLMT_PORTDOWN_TX_TIM:	/* From RLMT via TIME. */
-		SkRlmtEvtPortDownX(pAC, IoC, Event, Para);
-		break;
-	case SK_RLMT_LINK_DOWN:		/* From SIRQ. */
-		SkRlmtEvtLinkDown(pAC, IoC, Para);
-		break;
-	case SK_RLMT_PORT_ADDR:		/* From ADDR. */
-		SkRlmtEvtPortAddr(pAC, IoC, Para);
-		break;
-
-	/* ----- RLMT events ----- */
-
-	case SK_RLMT_START:		/* From DRV. */
-		SkRlmtEvtStart(pAC, IoC, Para);
-		break;
-	case SK_RLMT_STOP:		/* From DRV. */
-		SkRlmtEvtStop(pAC, IoC, Para);
-		break;
-	case SK_RLMT_TIM:		/* From RLMT via TIME. */
-		SkRlmtEvtTim(pAC, IoC, Para);
-		break;
-	case SK_RLMT_SEG_TIM:
-		SkRlmtEvtSegTim(pAC, IoC, Para);
-		break;
-	case SK_RLMT_PACKET_RECEIVED:	/* From DRV. */
-		SkRlmtEvtPacketRx(pAC, IoC, Para);
-		break;
-	case SK_RLMT_STATS_CLEAR:	/* From PNMI. */
-		SkRlmtEvtStatsClear(pAC, IoC, Para);
-		break;
-	case SK_RLMT_STATS_UPDATE:	/* From PNMI. */
-		SkRlmtEvtStatsUpdate(pAC, IoC, Para);
-		break;
-	case SK_RLMT_PREFPORT_CHANGE:	/* From PNMI. */
-		SkRlmtEvtPrefportChange(pAC, IoC, Para);
-		break;
-	case SK_RLMT_MODE_CHANGE:	/* From PNMI. */
-		SkRlmtEvtModeChange(pAC, IoC, Para);
-		break;
-	case SK_RLMT_SET_NETS:	/* From DRV. */
-		SkRlmtEvtSetNets(pAC, IoC, Para);
-		break;
-
-	/* ----- Unknown events ----- */
-
-	default:	/* Create error log entry. */
-		SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL,
-			("Unknown RLMT Event %d.\n", Event))
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E003, SKERR_RLMT_E003_MSG);
-		break;
-	}	/* switch() */
-
-	return (0);
-}	/* SkRlmtEvent */
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
diff --git a/drivers/net/sk98lin/sktimer.c b/drivers/net/sk98lin/sktimer.c
deleted file mode 100644
index 4e462955ecd8..000000000000
--- a/drivers/net/sk98lin/sktimer.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/******************************************************************************
- *
- * Name:	sktimer.c
- * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
- * Version:	$Revision: 1.14 $
- * Date:	$Date: 2003/09/16 13:46:51 $
- * Purpose:	High level timer functions.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-
-/*
- *	Event queue and dispatcher
- */
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: sktimer.c,v 1.14 2003/09/16 13:46:51 rschmidt Exp $ (C) Marvell.";
-#endif
-
-#include "h/skdrv1st.h"		/* Driver Specific Definitions */
-#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */
-
-#ifdef __C2MAN__
-/*
-	Event queue management.
-
-	General Description:
-
- */
-intro()
-{}
-#endif
-
-
-/* Forward declaration */
-static void timer_done(SK_AC *pAC,SK_IOC Ioc,int Restart);
-
-
-/*
- * Inits the software timer
- *
- * needs to be called during Init level 1.
- */
-void	SkTimerInit(
-SK_AC	*pAC,		/* Adapters context */
-SK_IOC	Ioc,		/* IoContext */
-int		Level)		/* Init Level */
-{
-	switch (Level) {
-	case SK_INIT_DATA:
-		pAC->Tim.StQueue = NULL;
-		break;
-	case SK_INIT_IO:
-		SkHwtInit(pAC, Ioc);
-		SkTimerDone(pAC, Ioc);
-		break;
-	default:
-		break;
-	}
-}
-
-/*
- * Stops a high level timer
- * - If a timer is not in the queue the function returns normally, too.
- */
-void	SkTimerStop(
-SK_AC		*pAC,		/* Adapters context */
-SK_IOC		Ioc,		/* IoContext */
-SK_TIMER	*pTimer)	/* Timer Pointer to be started */
-{
-	SK_TIMER	**ppTimPrev;
-	SK_TIMER	*pTm;
-
-	/*
-	 * remove timer from queue
-	 */
-	pTimer->TmActive = SK_FALSE;
-	
-	if (pAC->Tim.StQueue == pTimer && !pTimer->TmNext) {
-		SkHwtStop(pAC, Ioc);
-	}
-	
-	for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev);
-		ppTimPrev = &pTm->TmNext ) {
-		
-		if (pTm == pTimer) {
-			/*
-			 * Timer found in queue
-			 * - dequeue it and
-			 * - correct delta of the next timer
-			 */
-			*ppTimPrev = pTm->TmNext;
-
-			if (pTm->TmNext) {
-				/* correct delta of next timer in queue */
-				pTm->TmNext->TmDelta += pTm->TmDelta;
-			}
-			return;
-		}
-	}
-}
-
-/*
- * Start a high level software timer
- */
-void	SkTimerStart(
-SK_AC		*pAC,		/* Adapters context */
-SK_IOC		Ioc,		/* IoContext */
-SK_TIMER	*pTimer,	/* Timer Pointer to be started */
-SK_U32		Time,		/* Time value */
-SK_U32		Class,		/* Event Class for this timer */
-SK_U32		Event,		/* Event Value for this timer */
-SK_EVPARA	Para)		/* Event Parameter for this timer */
-{
-	SK_TIMER	**ppTimPrev;
-	SK_TIMER	*pTm;
-	SK_U32		Delta;
-
-	Time /= 16;		/* input is uS, clock ticks are 16uS */
-	
-	if (!Time)
-		Time = 1;
-
-	SkTimerStop(pAC, Ioc, pTimer);
-
-	pTimer->TmClass = Class;
-	pTimer->TmEvent = Event;
-	pTimer->TmPara = Para;
-	pTimer->TmActive = SK_TRUE;
-
-	if (!pAC->Tim.StQueue) {
-		/* First Timer to be started */
-		pAC->Tim.StQueue = pTimer;
-		pTimer->TmNext = NULL;
-		pTimer->TmDelta = Time;
-		
-		SkHwtStart(pAC, Ioc, Time);
-		
-		return;
-	}
-
-	/*
-	 * timer correction
-	 */
-	timer_done(pAC, Ioc, 0);
-
-	/*
-	 * find position in queue
-	 */
-	Delta = 0;
-	for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev);
-		ppTimPrev = &pTm->TmNext ) {
-		
-		if (Delta + pTm->TmDelta > Time) {
-			/* Position found */
-			/* Here the timer needs to be inserted. */
-			break;
-		}
-		Delta += pTm->TmDelta;
-	}
-
-	/* insert in queue */
-	*ppTimPrev = pTimer;
-	pTimer->TmNext = pTm;
-	pTimer->TmDelta = Time - Delta;
-
-	if (pTm) {
-		/* There is a next timer
-		 * -> correct its Delta value.
-		 */
-		pTm->TmDelta -= pTimer->TmDelta;
-	}
-
-	/* restart with first */
-	SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta);
-}
-
-
-void	SkTimerDone(
-SK_AC	*pAC,		/* Adapters context */
-SK_IOC	Ioc)		/* IoContext */
-{
-	timer_done(pAC, Ioc, 1);
-}
-
-
-static void	timer_done(
-SK_AC	*pAC,		/* Adapters context */
-SK_IOC	Ioc,		/* IoContext */
-int		Restart)	/* Do we need to restart the Hardware timer ? */
-{
-	SK_U32		Delta;
-	SK_TIMER	*pTm;
-	SK_TIMER	*pTComp;	/* Timer completed now now */
-	SK_TIMER	**ppLast;	/* Next field of Last timer to be deq */
-	int		Done = 0;
-
-	Delta = SkHwtRead(pAC, Ioc);
-	
-	ppLast = &pAC->Tim.StQueue;
-	pTm = pAC->Tim.StQueue;
-	while (pTm && !Done) {
-		if (Delta >= pTm->TmDelta) {
-			/* Timer ran out */
-			pTm->TmActive = SK_FALSE;
-			Delta -= pTm->TmDelta;
-			ppLast = &pTm->TmNext;
-			pTm = pTm->TmNext;
-		}
-		else {
-			/* We found the first timer that did not run out */
-			pTm->TmDelta -= Delta;
-			Delta = 0;
-			Done = 1;
-		}
-	}
-	*ppLast = NULL;
-	/*
-	 * pTm points to the first Timer that did not run out.
-	 * StQueue points to the first Timer that run out.
-	 */
-
-	for ( pTComp = pAC->Tim.StQueue; pTComp; pTComp = pTComp->TmNext) {
-		SkEventQueue(pAC,pTComp->TmClass, pTComp->TmEvent, pTComp->TmPara);
-	}
-
-	/* Set head of timer queue to the first timer that did not run out */
-	pAC->Tim.StQueue = pTm;
-
-	if (Restart && pAC->Tim.StQueue) {
-		/* Restart HW timer */
-		SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta);
-	}
-}
-
-/* End of file */
diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c
deleted file mode 100644
index 1e662aaebf84..000000000000
--- a/drivers/net/sk98lin/skvpd.c
+++ /dev/null
@@ -1,1091 +0,0 @@
-/******************************************************************************
- *
- * Name:	skvpd.c
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.37 $
- * Date:	$Date: 2003/01/13 10:42:45 $
- * Purpose:	Shared software to read and write VPD data
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2003 SysKonnect GmbH.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
-	Please refer skvpd.txt for information how to include this module
- */
-static const char SysKonnectFileId[] =
-	"@(#)$Id: skvpd.c,v 1.37 2003/01/13 10:42:45 rschmidt Exp $ (C) SK";
-
-#include "h/skdrv1st.h"
-#include "h/sktypes.h"
-#include "h/skdebug.h"
-#include "h/skdrv2nd.h"
-
-/*
- * Static functions
- */
-#ifndef SK_KR_PROTO
-static SK_VPD_PARA	*vpd_find_para(
-	SK_AC	*pAC,
-	const char	*key,
-	SK_VPD_PARA *p);
-#else	/* SK_KR_PROTO */
-static SK_VPD_PARA	*vpd_find_para();
-#endif	/* SK_KR_PROTO */
-
-/*
- * waits for a completion of a VPD transfer
- * The VPD transfer must complete within SK_TICKS_PER_SEC/16
- *
- * returns	0:	success, transfer completes
- *		error	exit(9) with a error message
- */
-static int VpdWait(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC,	/* IO Context */
-int		event)	/* event to wait for (VPD_READ / VPD_write) completion*/
-{
-	SK_U64	start_time;
-	SK_U16	state;
-
-	SK_DBG_MSG(pAC,SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("VPD wait for %s\n", event?"Write":"Read"));
-	start_time = SkOsGetTime(pAC);
-	do {
-		if (SkOsGetTime(pAC) - start_time > SK_TICKS_PER_SEC) {
-
-			/* Bug fix AF: Thu Mar 28 2002
-			 * Do not call: VPD_STOP(pAC, IoC);
-			 * A pending VPD read cycle can not be aborted by writing
-			 * VPD_WRITE to the PCI_VPD_ADR_REG (VPD address register).
-			 * Although the write threshold in the OUR-register protects
-			 * VPD read only space from being overwritten this does not
-			 * protect a VPD read from being `converted` into a VPD write
-			 * operation (on the fly). As a consequence the VPD_STOP would
-			 * delete VPD read only data. In case of any problems with the
-			 * I2C bus we exit the loop here. The I2C read operation can
-			 * not be aborted except by a reset (->LR).
-			 */
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_FATAL | SK_DBGCAT_ERR,
-				("ERROR:VPD wait timeout\n"));
-			return(1);
-		}
-		
-		VPD_IN16(pAC, IoC, PCI_VPD_ADR_REG, &state);
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-			("state = %x, event %x\n",state,event));
-	} while((int)(state & PCI_VPD_FLAG) == event);
-
-	return(0);
-}
-
-#ifdef SKDIAG
-
-/*
- * Read the dword at address 'addr' from the VPD EEPROM.
- *
- * Needed Time:	MIN 1,3 ms	MAX 2,6 ms
- *
- * Note: The DWord is returned in the endianess of the machine the routine
- *       is running on.
- *
- * Returns the data read.
- */
-SK_U32 VpdReadDWord(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC,	/* IO Context */
-int		addr)	/* VPD address */
-{
-	SK_U32	Rtv;
-
-	/* start VPD read */
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("VPD read dword at 0x%x\n",addr));
-	addr &= ~VPD_WRITE;		/* ensure the R/W bit is set to read */
-
-	VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)addr);
-
-	/* ignore return code here */
-	(void)VpdWait(pAC, IoC, VPD_READ);
-
-	/* Don't swap here, it's a data stream of bytes */
-	Rtv = 0;
-
-	VPD_IN32(pAC, IoC, PCI_VPD_DAT_REG, &Rtv);
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("VPD read dword data = 0x%x\n",Rtv));
-	return(Rtv);
-}
-
-#endif	/* SKDIAG */
-
-/*
- *	Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
- *	or to the I2C EEPROM.
- *
- * Returns number of bytes read / written.
- */
-static int VpdWriteStream(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC,	/* IO Context */
-char	*buf,	/* data buffer */
-int		Addr,	/* VPD start address */
-int		Len)	/* number of bytes to read / to write */
-{
-	int		i;
-	int		j;
-	SK_U16	AdrReg;
-	int		Rtv;
-	SK_U8	* pComp;	/* Compare pointer */
-	SK_U8	Data;		/* Input Data for Compare */
-
-	/* Init Compare Pointer */
-	pComp = (SK_U8 *) buf;
-
-	for (i = 0; i < Len; i++, buf++) {
-		if ((i%sizeof(SK_U32)) == 0) {
-			/*
-			 * At the begin of each cycle read the Data Reg
-			 * So it is initialized even if only a few bytes
-			 * are written.
-			 */
-			AdrReg = (SK_U16) Addr;
-			AdrReg &= ~VPD_WRITE;	/* READ operation */
-
-			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
-
-			/* Wait for termination */
-			Rtv = VpdWait(pAC, IoC, VPD_READ);
-			if (Rtv != 0) {
-				return(i);
-			}
-		}
-
-		/* Write current Byte */
-		VPD_OUT8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)),
-				*(SK_U8*)buf);
-
-		if (((i%sizeof(SK_U32)) == 3) || (i == (Len - 1))) {
-			/* New Address needs to be written to VPD_ADDR reg */
-			AdrReg = (SK_U16) Addr;
-			Addr += sizeof(SK_U32);
-			AdrReg |= VPD_WRITE;	/* WRITE operation */
-
-			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
-
-			/* Wait for termination */
-			Rtv = VpdWait(pAC, IoC, VPD_WRITE);
-			if (Rtv != 0) {
-				SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-					("Write Timed Out\n"));
-				return(i - (i%sizeof(SK_U32)));
-			}
-
-			/*
-			 * Now re-read to verify
-			 */
-			AdrReg &= ~VPD_WRITE;	/* READ operation */
-
-			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
-
-			/* Wait for termination */
-			Rtv = VpdWait(pAC, IoC, VPD_READ);
-			if (Rtv != 0) {
-				SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-					("Verify Timed Out\n"));
-				return(i - (i%sizeof(SK_U32)));
-			}
-
-			for (j = 0; j <= (int)(i%sizeof(SK_U32)); j++, pComp++) {
-				
-				VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + j, &Data);
-				
-				if (Data != *pComp) {
-					/* Verify Error */
-					SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-						("WriteStream Verify Error\n"));
-					return(i - (i%sizeof(SK_U32)) + j);
-				}
-			}
-		}
-	}
-
-	return(Len);
-}
-	
-
-/*
- *	Read one Stream of 'len' bytes of VPD data, starting at 'addr' from
- *	or to the I2C EEPROM.
- *
- * Returns number of bytes read / written.
- */
-static int VpdReadStream(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC,	/* IO Context */
-char	*buf,	/* data buffer */
-int		Addr,	/* VPD start address */
-int		Len)	/* number of bytes to read / to write */
-{
-	int		i;
-	SK_U16	AdrReg;
-	int		Rtv;
-
-	for (i = 0; i < Len; i++, buf++) {
-		if ((i%sizeof(SK_U32)) == 0) {
-			/* New Address needs to be written to VPD_ADDR reg */
-			AdrReg = (SK_U16) Addr;
-			Addr += sizeof(SK_U32);
-			AdrReg &= ~VPD_WRITE;	/* READ operation */
-
-			VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg);
-
-			/* Wait for termination */
-			Rtv = VpdWait(pAC, IoC, VPD_READ);
-			if (Rtv != 0) {
-				return(i);
-			}
-		}
-		VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)),
-			(SK_U8 *)buf);
-	}
-
-	return(Len);
-}
-
-/*
- *	Read ore writes 'len' bytes of VPD data, starting at 'addr' from
- *	or to the I2C EEPROM.
- *
- * Returns number of bytes read / written.
- */
-static int VpdTransferBlock(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC,	/* IO Context */
-char	*buf,	/* data buffer */
-int		addr,	/* VPD start address */
-int		len,	/* number of bytes to read / to write */
-int		dir)	/* transfer direction may be VPD_READ or VPD_WRITE */
-{
-	int		Rtv;	/* Return value */
-	int		vpd_rom_size;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("VPD %s block, addr = 0x%x, len = %d\n",
-		dir ? "write" : "read", addr, len));
-
-	if (len == 0)
-		return(0);
-
-	vpd_rom_size = pAC->vpd.rom_size;
-	
-	if (addr > vpd_rom_size - 4) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Address error: 0x%x, exp. < 0x%x\n",
-			addr, vpd_rom_size - 4));
-		return(0);
-	}
-	
-	if (addr + len > vpd_rom_size) {
-		len = vpd_rom_size - addr;
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("Warning: len was cut to %d\n", len));
-	}
-
-	if (dir == VPD_READ) {
-		Rtv = VpdReadStream(pAC, IoC, buf, addr, len);
-	}
-	else {
-		Rtv = VpdWriteStream(pAC, IoC, buf, addr, len);
-	}
-
-	return(Rtv);
-}
-
-#ifdef SKDIAG
-
-/*
- *	Read 'len' bytes of VPD data, starting at 'addr'.
- *
- * Returns number of bytes read.
- */
-int VpdReadBlock(
-SK_AC	*pAC,	/* pAC pointer */
-SK_IOC	IoC,	/* IO Context */
-char	*buf,	/* buffer were the data should be stored */
-int		addr,	/* start reading at the VPD address */
-int		len)	/* number of bytes to read */
-{
-	return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_READ));
-}
-
-/*
- *	Write 'len' bytes of *but to the VPD EEPROM, starting at 'addr'.
- *
- * Returns number of bytes writes.
- */
-int VpdWriteBlock(
-SK_AC	*pAC,	/* pAC pointer */
-SK_IOC	IoC,	/* IO Context */
-char	*buf,	/* buffer, holds the data to write */
-int		addr,	/* start writing at the VPD address */
-int		len)	/* number of bytes to write */
-{
-	return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_WRITE));
-}
-#endif	/* SKDIAG */
-
-/*
- * (re)initialize the VPD buffer
- *
- * Reads the VPD data from the EEPROM into the VPD buffer.
- * Get the remaining read only and read / write space.
- *
- * return	0:	success
- *		1:	fatal VPD error
- */
-static int VpdInit(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC)	/* IO Context */
-{
-	SK_VPD_PARA *r, rp;	/* RW or RV */
-	int		i;
-	unsigned char	x;
-	int		vpd_size;
-	SK_U16	dev_id;
-	SK_U32	our_reg2;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, ("VpdInit .. "));
-	
-	VPD_IN16(pAC, IoC, PCI_DEVICE_ID, &dev_id);
-	
-	VPD_IN32(pAC, IoC, PCI_OUR_REG_2, &our_reg2);
-	
-	pAC->vpd.rom_size = 256 << ((our_reg2 & PCI_VPD_ROM_SZ) >> 14);
-	
-	/*
-	 * this function might get used before the hardware is initialized
-	 * therefore we cannot always trust in GIChipId
-	 */
-	if (((pAC->vpd.v.vpd_status & VPD_VALID) == 0 &&
-		dev_id != VPD_DEV_ID_GENESIS) ||
-		((pAC->vpd.v.vpd_status & VPD_VALID) != 0 &&
-		!pAC->GIni.GIGenesis)) {
-
-		/* for Yukon the VPD size is always 256 */
-		vpd_size = VPD_SIZE_YUKON;
-	}
-	else {
-		/* Genesis uses the maximum ROM size up to 512 for VPD */
-		if (pAC->vpd.rom_size > VPD_SIZE_GENESIS) {
-			vpd_size = VPD_SIZE_GENESIS;
-		}
-		else {
-			vpd_size = pAC->vpd.rom_size;
-		}
-	}
-
-	/* read the VPD data into the VPD buffer */
-	if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf, 0, vpd_size, VPD_READ)
-		!= vpd_size) {
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("Block Read Error\n"));
-		return(1);
-	}
-	
-	pAC->vpd.vpd_size = vpd_size;
-
-	/* Asus K8V Se Deluxe bugfix. Correct VPD content */
-	/* MBo April 2004 */
-	if (((unsigned char)pAC->vpd.vpd_buf[0x3f] == 0x38) &&
-	    ((unsigned char)pAC->vpd.vpd_buf[0x40] == 0x3c) &&
-	    ((unsigned char)pAC->vpd.vpd_buf[0x41] == 0x45)) {
-		printk("sk98lin: Asus mainboard with buggy VPD? "
-				"Correcting data.\n");
-		pAC->vpd.vpd_buf[0x40] = 0x38;
-	}
-
-
-	/* find the end tag of the RO area */
-	if (!(r = vpd_find_para(pAC, VPD_RV, &rp))) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Encoding Error: RV Tag not found\n"));
-		return(1);
-	}
-	
-	if (r->p_val + r->p_len > pAC->vpd.vpd_buf + vpd_size/2) {
-		SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Encoding Error: Invalid VPD struct size\n"));
-		return(1);
-	}
-	pAC->vpd.v.vpd_free_ro = r->p_len - 1;
-
-	/* test the checksum */
-	for (i = 0, x = 0; (unsigned)i <= (unsigned)vpd_size/2 - r->p_len; i++) {
-		x += pAC->vpd.vpd_buf[i];
-	}
-	
-	if (x != 0) {
-		/* checksum error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("VPD Checksum Error\n"));
-		return(1);
-	}
-
-	/* find and check the end tag of the RW area */
-	if (!(r = vpd_find_para(pAC, VPD_RW, &rp))) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Encoding Error: RV Tag not found\n"));
-		return(1);
-	}
-	
-	if (r->p_val < pAC->vpd.vpd_buf + vpd_size/2) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Encoding Error: Invalid VPD struct size\n"));
-		return(1);
-	}
-	pAC->vpd.v.vpd_free_rw = r->p_len;
-
-	/* everything seems to be ok */
-	if (pAC->GIni.GIChipId != 0) {
-		pAC->vpd.v.vpd_status |= VPD_VALID;
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT,
-		("done. Free RO = %d, Free RW = %d\n",
-		pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw));
-
-	return(0);
-}
-
-/*
- *	find the Keyword 'key' in the VPD buffer and fills the
- *	parameter struct 'p' with it's values
- *
- * returns	*p	success
- *		0:	parameter was not found or VPD encoding error
- */
-static SK_VPD_PARA *vpd_find_para(
-SK_AC		*pAC,	/* common data base */
-const char	*key,	/* keyword to find (e.g. "MN") */
-SK_VPD_PARA *p)		/* parameter description struct */
-{
-	char *v	;	/* points to VPD buffer */
-	int max;	/* Maximum Number of Iterations */
-
-	v = pAC->vpd.vpd_buf;
-	max = 128;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("VPD find para %s .. ",key));
-
-	/* check mandatory resource type ID string (Product Name) */
-	if (*v != (char)RES_ID) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Error: 0x%x missing\n", RES_ID));
-		return NULL;
-	}
-
-	if (strcmp(key, VPD_NAME) == 0) {
-		p->p_len = VPD_GET_RES_LEN(v);
-		p->p_val = VPD_GET_VAL(v);
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-			("found, len = %d\n", p->p_len));
-		return(p);
-	}
-
-	v += 3 + VPD_GET_RES_LEN(v) + 3;
-	for (;; ) {
-		if (SK_MEMCMP(key,v,2) == 0) {
-			p->p_len = VPD_GET_VPD_LEN(v);
-			p->p_val = VPD_GET_VAL(v);
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-				("found, len = %d\n",p->p_len));
-			return(p);
-		}
-
-		/* exit when reaching the "RW" Tag or the maximum of itera. */
-		max--;
-		if (SK_MEMCMP(VPD_RW,v,2) == 0 || max == 0) {
-			break;
-		}
-
-		if (SK_MEMCMP(VPD_RV,v,2) == 0) {
-			v += 3 + VPD_GET_VPD_LEN(v) + 3;	/* skip VPD-W */
-		}
-		else {
-			v += 3 + VPD_GET_VPD_LEN(v);
-		}
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-			("scanning '%c%c' len = %d\n",v[0],v[1],v[2]));
-	}
-
-#ifdef DEBUG
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("not found\n"));
-	if (max == 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Key/Len Encoding error\n"));
-	}
-#endif /* DEBUG */
-	return NULL;
-}
-
-/*
- *	Move 'n' bytes. Begin with the last byte if 'n' is > 0,
- *	Start with the last byte if n is < 0.
- *
- * returns nothing
- */
-static void vpd_move_para(
-char	*start,		/* start of memory block */
-char	*end,		/* end of memory block to move */
-int		n)			/* number of bytes the memory block has to be moved */
-{
-	char *p;
-	int i;		/* number of byte copied */
-
-	if (n == 0)
-		return;
-
-	i = (int) (end - start + 1);
-	if (n < 0) {
-		p = start + n;
-		while (i != 0) {
-			*p++ = *start++;
-			i--;
-		}
-	}
-	else {
-		p = end + n;
-		while (i != 0) {
-			*p-- = *end--;
-			i--;
-		}
-	}
-}
-
-/*
- *	setup the VPD keyword 'key' at 'ip'.
- *
- * returns nothing
- */
-static void vpd_insert_key(
-const char	*key,	/* keyword to insert */
-const char	*buf,	/* buffer with the keyword value */
-int		len,		/* length of the value string */
-char	*ip)		/* inseration point */
-{
-	SK_VPD_KEY *p;
-
-	p = (SK_VPD_KEY *) ip;
-	p->p_key[0] = key[0];
-	p->p_key[1] = key[1];
-	p->p_len = (unsigned char) len;
-	SK_MEMCPY(&p->p_val,buf,len);
-}
-
-/*
- *	Setup the VPD end tag "RV" / "RW".
- *	Also correct the remaining space variables vpd_free_ro / vpd_free_rw.
- *
- * returns	0:	success
- *		1:	encoding error
- */
-static int vpd_mod_endtag(
-SK_AC	*pAC,		/* common data base */
-char	*etp)		/* end pointer input position */
-{
-	SK_VPD_KEY *p;
-	unsigned char	x;
-	int	i;
-	int	vpd_size;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("VPD modify endtag at 0x%x = '%c%c'\n",etp,etp[0],etp[1]));
-
-	vpd_size = pAC->vpd.vpd_size;
-
-	p = (SK_VPD_KEY *) etp;
-
-	if (p->p_key[0] != 'R' || (p->p_key[1] != 'V' && p->p_key[1] != 'W')) {
-		/* something wrong here, encoding error */
-		SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL,
-			("Encoding Error: invalid end tag\n"));
-		return(1);
-	}
-	if (etp > pAC->vpd.vpd_buf + vpd_size/2) {
-		/* create "RW" tag */
-		p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size-etp-3-1);
-		pAC->vpd.v.vpd_free_rw = (int) p->p_len;
-		i = pAC->vpd.v.vpd_free_rw;
-		etp += 3;
-	}
-	else {
-		/* create "RV" tag */
-		p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size/2-etp-3);
-		pAC->vpd.v.vpd_free_ro = (int) p->p_len - 1;
-
-		/* setup checksum */
-		for (i = 0, x = 0; i < vpd_size/2 - p->p_len; i++) {
-			x += pAC->vpd.vpd_buf[i];
-		}
-		p->p_val = (char) 0 - x;
-		i = pAC->vpd.v.vpd_free_ro;
-		etp += 4;
-	}
-	while (i) {
-		*etp++ = 0x00;
-		i--;
-	}
-
-	return(0);
-}
-
-/*
- *	Insert a VPD keyword into the VPD buffer.
- *
- *	The keyword 'key' is inserted at the position 'ip' in the
- *	VPD buffer.
- *	The keywords behind the input position will
- *	be moved. The VPD end tag "RV" or "RW" is generated again.
- *
- * returns	0:	success
- *		2:	value string was cut
- *		4:	VPD full, keyword was not written
- *		6:	fatal VPD error
- *
- */
-static int	VpdSetupPara(
-SK_AC	*pAC,		/* common data base */
-const char	*key,	/* keyword to insert */
-const char	*buf,	/* buffer with the keyword value */
-int		len,		/* length of the keyword value */
-int		type,		/* VPD_RO_KEY or VPD_RW_KEY */
-int		op)			/* operation to do: ADD_KEY or OWR_KEY */
-{
-	SK_VPD_PARA vp;
-	char	*etp;		/* end tag position */
-	int	free;		/* remaining space in selected area */
-	char	*ip;		/* input position inside the VPD buffer */
-	int	rtv;		/* return code */
-	int	head;		/* additional haeder bytes to move */
-	int	found;		/* additinoal bytes if the keyword was found */
-	int vpd_size;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("VPD setup para key = %s, val = %s\n",key,buf));
-	
-	vpd_size = pAC->vpd.vpd_size;
-
-	rtv = 0;
-	ip = NULL;
-	if (type == VPD_RW_KEY) {
-		/* end tag is "RW" */
-		free = pAC->vpd.v.vpd_free_rw;
-		etp = pAC->vpd.vpd_buf + (vpd_size - free - 1 - 3);
-	}
-	else {
-		/* end tag is "RV" */
-		free = pAC->vpd.v.vpd_free_ro;
-		etp = pAC->vpd.vpd_buf + (vpd_size/2 - free - 4);
-	}
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-		("Free RO = %d, Free RW = %d\n",
-		pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw));
-
-	head = 0;
-	found = 0;
-	if (op == OWR_KEY) {
-		if (vpd_find_para(pAC, key, &vp)) {
-			found = 3;
-			ip = vp.p_val - 3;
-			free += vp.p_len + 3;
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-				("Overwrite Key\n"));
-		}
-		else {
-			op = ADD_KEY;
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL,
-				("Add Key\n"));
-		}
-	}
-	if (op == ADD_KEY) {
-		ip = etp;
-		vp.p_len = 0;
-		head = 3;
-	}
-
-	if (len + 3 > free) {
-		if (free < 7) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("VPD Buffer Overflow, keyword not written\n"));
-			return(4);
-		}
-		/* cut it again */
-		len = free - 3;
-		rtv = 2;
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("VPD Buffer Full, Keyword was cut\n"));
-	}
-
-	vpd_move_para(ip + vp.p_len + found, etp+2, len-vp.p_len+head);
-	vpd_insert_key(key, buf, len, ip);
-	if (vpd_mod_endtag(pAC, etp + len - vp.p_len + head)) {
-		pAC->vpd.v.vpd_status &= ~VPD_VALID;
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("VPD Encoding Error\n"));
-		return(6);
-	}
-
-	return(rtv);
-}
-
-
-/*
- *	Read the contents of the VPD EEPROM and copy it to the
- *	VPD buffer if not already done.
- *
- * return:	A pointer to the vpd_status structure. The structure contains
- *		this fields.
- */
-SK_VPD_STATUS *VpdStat(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC)	/* IO Context */
-{
-	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
-		(void)VpdInit(pAC, IoC);
-	}
-	return(&pAC->vpd.v);
-}
-
-
-/*
- *	Read the contents of the VPD EEPROM and copy it to the VPD
- *	buffer if not already done.
- *	Scan the VPD buffer for VPD keywords and create the VPD
- *	keyword list by copying the keywords to 'buf', all after
- *	each other and terminated with a '\0'.
- *
- * Exceptions:	o The Resource Type ID String (product name) is called "Name"
- *		o The VPD end tags 'RV' and 'RW' are not listed
- *
- *	The number of copied keywords is counted in 'elements'.
- *
- * returns	0:	success
- *		2:	buffer overfull, one or more keywords are missing
- *		6:	fatal VPD error
- *
- *	example values after returning:
- *
- *		buf =	"Name\0PN\0EC\0MN\0SN\0CP\0VF\0VL\0YA\0"
- *		*len =		30
- *		*elements =	 9
- */
-int VpdKeys(
-SK_AC	*pAC,		/* common data base */
-SK_IOC	IoC,		/* IO Context */
-char	*buf,		/* buffer where to copy the keywords */
-int		*len,		/* buffer length */
-int		*elements)	/* number of keywords returned */
-{
-	char *v;
-	int n;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("list VPD keys .. "));
-	*elements = 0;
-	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
-		if (VpdInit(pAC, IoC) != 0) {
-			*len = 0;
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("VPD Init Error, terminated\n"));
-			return(6);
-		}
-	}
-
-	if ((signed)strlen(VPD_NAME) + 1 <= *len) {
-		v = pAC->vpd.vpd_buf;
-		strcpy(buf,VPD_NAME);
-		n = strlen(VPD_NAME) + 1;
-		buf += n;
-		*elements = 1;
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
-			("'%c%c' ",v[0],v[1]));
-	}
-	else {
-		*len = 0;
-		SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR,
-			("buffer overflow\n"));
-		return(2);
-	}
-
-	v += 3 + VPD_GET_RES_LEN(v) + 3;
-	for (;; ) {
-		/* exit when reaching the "RW" Tag */
-		if (SK_MEMCMP(VPD_RW,v,2) == 0) {
-			break;
-		}
-
-		if (SK_MEMCMP(VPD_RV,v,2) == 0) {
-			v += 3 + VPD_GET_VPD_LEN(v) + 3;	/* skip VPD-W */
-			continue;
-		}
-
-		if (n+3 <= *len) {
-			SK_MEMCPY(buf,v,2);
-			buf += 2;
-			*buf++ = '\0';
-			n += 3;
-			v += 3 + VPD_GET_VPD_LEN(v);
-			*elements += 1;
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
-				("'%c%c' ",v[0],v[1]));
-		}
-		else {
-			*len = n;
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("buffer overflow\n"));
-			return(2);
-		}
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("\n"));
-	*len = n;
-	return(0);
-}
-
-
-/*
- *	Read the contents of the VPD EEPROM and copy it to the
- *	VPD buffer if not already done. Search for the VPD keyword
- *	'key' and copy its value to 'buf'. Add a terminating '\0'.
- *	If the value does not fit into the buffer cut it after
- *	'len' - 1 bytes.
- *
- * returns	0:	success
- *		1:	keyword not found
- *		2:	value string was cut
- *		3:	VPD transfer timeout
- *		6:	fatal VPD error
- */
-int VpdRead(
-SK_AC		*pAC,	/* common data base */
-SK_IOC		IoC,	/* IO Context */
-const char	*key,	/* keyword to read (e.g. "MN") */
-char		*buf,	/* buffer where to copy the keyword value */
-int			*len)	/* buffer length */
-{
-	SK_VPD_PARA *p, vp;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("VPD read %s .. ", key));
-	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
-		if (VpdInit(pAC, IoC) != 0) {
-			*len = 0;
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("VPD init error\n"));
-			return(6);
-		}
-	}
-
-	if ((p = vpd_find_para(pAC, key, &vp)) != NULL) {
-		if (p->p_len > (*(unsigned *)len)-1) {
-			p->p_len = *len - 1;
-		}
-		SK_MEMCPY(buf, p->p_val, p->p_len);
-		buf[p->p_len] = '\0';
-		*len = p->p_len;
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX,
-			("%c%c%c%c.., len = %d\n",
-			buf[0],buf[1],buf[2],buf[3],*len));
-	}
-	else {
-		*len = 0;
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, ("not found\n"));
-		return(1);
-	}
-	return(0);
-}
-
-
-/*
- *	Check whether a given key may be written
- *
- * returns
- *	SK_TRUE		Yes it may be written
- *	SK_FALSE	No it may be written
- */
-SK_BOOL VpdMayWrite(
-char	*key)	/* keyword to write (allowed values "Yx", "Vx") */
-{
-	if ((*key != 'Y' && *key != 'V') ||
-		key[1] < '0' || key[1] > 'Z' ||
-		(key[1] > '9' && key[1] < 'A') || strlen(key) != 2) {
-
-		return(SK_FALSE);
-	}
-	return(SK_TRUE);
-}
-
-/*
- *	Read the contents of the VPD EEPROM and copy it to the VPD
- *	buffer if not already done. Insert/overwrite the keyword 'key'
- *	in the VPD buffer. Cut the keyword value if it does not fit
- *	into the VPD read / write area.
- *
- * returns	0:	success
- *		2:	value string was cut
- *		3:	VPD transfer timeout
- *		4:	VPD full, keyword was not written
- *		5:	keyword cannot be written
- *		6:	fatal VPD error
- */
-int VpdWrite(
-SK_AC		*pAC,	/* common data base */
-SK_IOC		IoC,	/* IO Context */
-const char	*key,	/* keyword to write (allowed values "Yx", "Vx") */
-const char	*buf)	/* buffer where the keyword value can be read from */
-{
-	int len;		/* length of the keyword to write */
-	int rtv;		/* return code */
-	int rtv2;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX,
-		("VPD write %s = %s\n",key,buf));
-
-	if ((*key != 'Y' && *key != 'V') ||
-		key[1] < '0' || key[1] > 'Z' ||
-		(key[1] > '9' && key[1] < 'A') || strlen(key) != 2) {
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("illegal key tag, keyword not written\n"));
-		return(5);
-	}
-
-	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
-		if (VpdInit(pAC, IoC) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("VPD init error\n"));
-			return(6);
-		}
-	}
-
-	rtv = 0;
-	len = strlen(buf);
-	if (len > VPD_MAX_LEN) {
-		/* cut it */
-		len = VPD_MAX_LEN;
-		rtv = 2;
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("keyword too long, cut after %d bytes\n",VPD_MAX_LEN));
-	}
-	if ((rtv2 = VpdSetupPara(pAC, key, buf, len, VPD_RW_KEY, OWR_KEY)) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("VPD write error\n"));
-		return(rtv2);
-	}
-
-	return(rtv);
-}
-
-/*
- *	Read the contents of the VPD EEPROM and copy it to the
- *	VPD buffer if not already done. Remove the VPD keyword
- *	'key' from the VPD buffer.
- *	Only the keywords in the read/write area can be deleted.
- *	Keywords in the read only area cannot be deleted.
- *
- * returns	0:	success, keyword was removed
- *		1:	keyword not found
- *		5:	keyword cannot be deleted
- *		6:	fatal VPD error
- */
-int VpdDelete(
-SK_AC	*pAC,	/* common data base */
-SK_IOC	IoC,	/* IO Context */
-char	*key)	/* keyword to read (e.g. "MN") */
-{
-	SK_VPD_PARA *p, vp;
-	char *etp;
-	int	vpd_size;
-
-	vpd_size = pAC->vpd.vpd_size;
-
-	SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_TX,("VPD delete key %s\n",key));
-	if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) {
-		if (VpdInit(pAC, IoC) != 0) {
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("VPD init error\n"));
-			return(6);
-		}
-	}
-
-	if ((p = vpd_find_para(pAC, key, &vp)) != NULL) {
-		if (p->p_val < pAC->vpd.vpd_buf + vpd_size/2) {
-			/* try to delete read only keyword */
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("cannot delete RO keyword\n"));
-			return(5);
-		}
-
-		etp = pAC->vpd.vpd_buf + (vpd_size-pAC->vpd.v.vpd_free_rw-1-3);
-
-		vpd_move_para(vp.p_val+vp.p_len, etp+2,
-			- ((int)(vp.p_len + 3)));
-		if (vpd_mod_endtag(pAC, etp - vp.p_len - 3)) {
-			pAC->vpd.v.vpd_status &= ~VPD_VALID;
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("VPD encoding error\n"));
-			return(6);
-		}
-	}
-	else {
-		SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-			("keyword not found\n"));
-		return(1);
-	}
-
-	return(0);
-}
-
-/*
- *	If the VPD buffer contains valid data write the VPD
- *	read/write area back to the VPD EEPROM.
- *
- * returns	0:	success
- *		3:	VPD transfer timeout
- */
-int VpdUpdate(
-SK_AC	*pAC,	/* Adapters context */
-SK_IOC	IoC)	/* IO Context */
-{
-	int vpd_size;
-
-	vpd_size = pAC->vpd.vpd_size;
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("VPD update .. "));
-	if ((pAC->vpd.v.vpd_status & VPD_VALID) != 0) {
-		if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf + vpd_size/2,
-			vpd_size/2, vpd_size/2, VPD_WRITE) != vpd_size/2) {
-
-			SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR,
-				("transfer timed out\n"));
-			return(3);
-		}
-	}
-	SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("done\n"));
-	return(0);
-}
-
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
deleted file mode 100644
index b4e75022a657..000000000000
--- a/drivers/net/sk98lin/skxmac2.c
+++ /dev/null
@@ -1,4160 +0,0 @@
-/******************************************************************************
- *
- * Name:	skxmac2.c
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.102 $
- * Date:	$Date: 2003/10/02 16:53:58 $
- * Purpose:	Contains functions to initialize the MACs and PHYs
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* typedefs *******************************************************************/
-
-/* BCOM PHY magic pattern list */
-typedef struct s_PhyHack {
-	int		PhyReg;		/* Phy register */
-	SK_U16	PhyVal;		/* Value to write */
-} BCOM_HACK;
-
-/* local variables ************************************************************/
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
-	"@(#) $Id: skxmac2.c,v 1.102 2003/10/02 16:53:58 rschmidt Exp $ (C) Marvell.";
-#endif
-
-#ifdef GENESIS
-static BCOM_HACK BcomRegA1Hack[] = {
- { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 },
- { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 },
- { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 },
- { 0, 0 }
-};
-static BCOM_HACK BcomRegC0Hack[] = {
- { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 },
- { 0x15, 0x0A04 }, { 0x18, 0x0420 },
- { 0, 0 }
-};
-#endif
-
-/* function prototypes ********************************************************/
-#ifdef GENESIS
-static void	SkXmInitPhyXmac(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkXmInitPhyBcom(SK_AC*, SK_IOC, int, SK_BOOL);
-static int	SkXmAutoNegDoneXmac(SK_AC*, SK_IOC, int);
-static int	SkXmAutoNegDoneBcom(SK_AC*, SK_IOC, int);
-#endif /* GENESIS */
-#ifdef YUKON
-static void	SkGmInitPhyMarv(SK_AC*, SK_IOC, int, SK_BOOL);
-static int	SkGmAutoNegDoneMarv(SK_AC*, SK_IOC, int);
-#endif /* YUKON */
-#ifdef OTHER_PHY
-static void	SkXmInitPhyLone(SK_AC*, SK_IOC, int, SK_BOOL);
-static void	SkXmInitPhyNat (SK_AC*, SK_IOC, int, SK_BOOL);
-static int	SkXmAutoNegDoneLone(SK_AC*, SK_IOC, int);
-static int	SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int);
-#endif /* OTHER_PHY */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmPhyRead() - Read from XMAC PHY register
- *
- * Description:	reads a 16-bit word from XMAC PHY or ext. PHY
- *
- * Returns:
- *	nothing
- */
-void SkXmPhyRead(
-SK_AC	*pAC,			/* Adapter Context */
-SK_IOC	IoC,			/* I/O Context */
-int		Port,			/* Port Index (MAC_1 + n) */
-int		PhyReg,			/* Register Address (Offset) */
-SK_U16	SK_FAR *pVal)	/* Pointer to Value */
-{
-	SK_U16		Mmu;
-	SK_GEPORT	*pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-	
-	/* write the PHY register's address */
-	XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
-	
-	/* get the PHY register's value */
-	XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
-	
-	if (pPrt->PhyType != SK_PHY_XMAC) {
-		do {
-			XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
-			/* wait until 'Ready' is set */
-		} while ((Mmu & XM_MMU_PHY_RDY) == 0);
-
-		/* get the PHY register's value */
-		XM_IN16(IoC, Port, XM_PHY_DATA, pVal);
-	}
-}	/* SkXmPhyRead */
-
-
-/******************************************************************************
- *
- *	SkXmPhyWrite() - Write to XMAC PHY register
- *
- * Description:	writes a 16-bit word to XMAC PHY or ext. PHY
- *
- * Returns:
- *	nothing
- */
-void SkXmPhyWrite(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		PhyReg,		/* Register Address (Offset) */
-SK_U16	Val)		/* Value */
-{
-	SK_U16		Mmu;
-	SK_GEPORT	*pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-	
-	if (pPrt->PhyType != SK_PHY_XMAC) {
-		do {
-			XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
-			/* wait until 'Busy' is cleared */
-		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);
-	}
-	
-	/* write the PHY register's address */
-	XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr);
-	
-	/* write the PHY register's value */
-	XM_OUT16(IoC, Port, XM_PHY_DATA, Val);
-	
-	if (pPrt->PhyType != SK_PHY_XMAC) {
-		do {
-			XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu);
-			/* wait until 'Busy' is cleared */
-		} while ((Mmu & XM_MMU_PHY_BUSY) != 0);
-	}
-}	/* SkXmPhyWrite */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkGmPhyRead() - Read from GPHY register
- *
- * Description:	reads a 16-bit word from GPHY through MDIO
- *
- * Returns:
- *	nothing
- */
-void SkGmPhyRead(
-SK_AC	*pAC,			/* Adapter Context */
-SK_IOC	IoC,			/* I/O Context */
-int		Port,			/* Port Index (MAC_1 + n) */
-int		PhyReg,			/* Register Address (Offset) */
-SK_U16	SK_FAR *pVal)	/* Pointer to Value */
-{
-	SK_U16	Ctrl;
-	SK_GEPORT	*pPrt;
-#ifdef VCPU
-	u_long SimCyle;
-	u_long SimLowTime;
-	
-	VCPUgetTime(&SimCyle, &SimLowTime);
-	VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n",
-		PhyReg, SimCyle, SimLowTime);
-#endif /* VCPU */
-	
-	pPrt = &pAC->GIni.GP[Port];
-	
-	/* set PHY-Register offset and 'Read' OpCode (= 1) */
-	*pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) |
-		GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD);
-
-	GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal);
-
-	GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
-	
-	/* additional check for MDC/MDIO activity */
-	if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
-		*pVal = 0;
-		return;
-	}
-
-	*pVal |= GM_SMI_CT_BUSY;
-	
-	do {
-#ifdef VCPU
-		VCPUwaitTime(1000);
-#endif /* VCPU */
-
-		GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
-
-	/* wait until 'ReadValid' is set */
-	} while (Ctrl == *pVal);
-	
-	/* get the PHY register's value */
-	GM_IN16(IoC, Port, GM_SMI_DATA, pVal);
-
-#ifdef VCPU
-	VCPUgetTime(&SimCyle, &SimLowTime);
-	VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
-		SimCyle, SimLowTime);
-#endif /* VCPU */
-
-}	/* SkGmPhyRead */
-
-
-/******************************************************************************
- *
- *	SkGmPhyWrite() - Write to GPHY register
- *
- * Description:	writes a 16-bit word to GPHY through MDIO
- *
- * Returns:
- *	nothing
- */
-void SkGmPhyWrite(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		PhyReg,		/* Register Address (Offset) */
-SK_U16	Val)		/* Value */
-{
-	SK_U16	Ctrl;
-	SK_GEPORT	*pPrt;
-#ifdef VCPU
-	SK_U32	DWord;
-	u_long	SimCyle;
-	u_long	SimLowTime;
-	
-	VCPUgetTime(&SimCyle, &SimLowTime);
-	VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n",
-		PhyReg, Val, SimCyle, SimLowTime);
-#endif /* VCPU */
-	
-	pPrt = &pAC->GIni.GP[Port];
-	
-	/* write the PHY register's value */
-	GM_OUT16(IoC, Port, GM_SMI_DATA, Val);
-	
-	/* set PHY-Register offset and 'Write' OpCode (= 0) */
-	Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg);
-
-	GM_OUT16(IoC, Port, GM_SMI_CTRL, Val);
-
-	GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
-	
-	/* additional check for MDC/MDIO activity */
-	if ((Ctrl & GM_SMI_CT_BUSY) == 0) {
-		return;
-	}
-	
-	Val |= GM_SMI_CT_BUSY;
-
-	do {
-#ifdef VCPU
-		/* read Timer value */
-		SK_IN32(IoC, B2_TI_VAL, &DWord);
-
-		VCPUwaitTime(1000);
-#endif /* VCPU */
-
-		GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl);
-
-	/* wait until 'Busy' is cleared */
-	} while (Ctrl == Val);
-	
-#ifdef VCPU
-	VCPUgetTime(&SimCyle, &SimLowTime);
-	VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n",
-		SimCyle, SimLowTime);
-#endif /* VCPU */
-
-}	/* SkGmPhyWrite */
-#endif /* YUKON */
-
-
-#ifdef SK_DIAG
-/******************************************************************************
- *
- *	SkGePhyRead() - Read from PHY register
- *
- * Description:	calls a read PHY routine dep. on board type
- *
- * Returns:
- *	nothing
- */
-void SkGePhyRead(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		PhyReg,		/* Register Address (Offset) */
-SK_U16	*pVal)		/* Pointer to Value */
-{
-	void (*r_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 *pVal);
-
-	if (pAC->GIni.GIGenesis) {
-		r_func = SkXmPhyRead;
-	}
-	else {
-		r_func = SkGmPhyRead;
-	}
-	
-	r_func(pAC, IoC, Port, PhyReg, pVal);
-}	/* SkGePhyRead */
-
-
-/******************************************************************************
- *
- *	SkGePhyWrite() - Write to PHY register
- *
- * Description:	calls a write PHY routine dep. on board type
- *
- * Returns:
- *	nothing
- */
-void SkGePhyWrite(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* I/O Context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		PhyReg,		/* Register Address (Offset) */
-SK_U16	Val)		/* Value */
-{
-	void (*w_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 Val);
-
-	if (pAC->GIni.GIGenesis) {
-		w_func = SkXmPhyWrite;
-	}
-	else {
-		w_func = SkGmPhyWrite;
-	}
-	
-	w_func(pAC, IoC, Port, PhyReg, Val);
-}	/* SkGePhyWrite */
-#endif /* SK_DIAG */
-
-
-/******************************************************************************
- *
- *	SkMacPromiscMode() - Enable / Disable Promiscuous Mode
- *
- * Description:
- *   enables / disables promiscuous mode by setting Mode Register (XMAC) or
- *   Receive Control Register (GMAC) dep. on board type   	
- *
- * Returns:
- *	nothing
- */
-void SkMacPromiscMode(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port,	/* Port Index (MAC_1 + n) */
-SK_BOOL	Enable)	/* Enable / Disable */
-{
-#ifdef YUKON
-	SK_U16	RcReg;
-#endif
-#ifdef GENESIS
-	SK_U32	MdReg;
-#endif	
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		XM_IN32(IoC, Port, XM_MODE, &MdReg);
-		/* enable or disable promiscuous mode */
-		if (Enable) {
-			MdReg |= XM_MD_ENA_PROM;
-		}
-		else {
-			MdReg &= ~XM_MD_ENA_PROM;
-		}
-		/* setup Mode Register */
-		XM_OUT32(IoC, Port, XM_MODE, MdReg);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
-		
-		/* enable or disable unicast and multicast filtering */
-		if (Enable) {
-			RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
-		}
-		else {
-			RcReg |= (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
-		}
-		/* setup Receive Control Register */
-		GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
-	}
-#endif /* YUKON */
-
-}	/* SkMacPromiscMode*/
-
-
-/******************************************************************************
- *
- *	SkMacHashing() - Enable / Disable Hashing
- *
- * Description:
- *   enables / disables hashing by setting Mode Register (XMAC) or
- *   Receive Control Register (GMAC) dep. on board type		
- *
- * Returns:
- *	nothing
- */
-void SkMacHashing(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port,	/* Port Index (MAC_1 + n) */
-SK_BOOL	Enable)	/* Enable / Disable */
-{
-#ifdef YUKON
-	SK_U16	RcReg;
-#endif	
-#ifdef GENESIS
-	SK_U32	MdReg;
-#endif
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		XM_IN32(IoC, Port, XM_MODE, &MdReg);
-		/* enable or disable hashing */
-		if (Enable) {
-			MdReg |= XM_MD_ENA_HASH;
-		}
-		else {
-			MdReg &= ~XM_MD_ENA_HASH;
-		}
-		/* setup Mode Register */
-		XM_OUT32(IoC, Port, XM_MODE, MdReg);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg);
-		
-		/* enable or disable multicast filtering */
-		if (Enable) {
-			RcReg |= GM_RXCR_MCF_ENA;
-		}
-		else {
-			RcReg &= ~GM_RXCR_MCF_ENA;
-		}
-		/* setup Receive Control Register */
-		GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg);
-	}
-#endif /* YUKON */
-
-}	/* SkMacHashing*/
-
-
-#ifdef SK_DIAG
-/******************************************************************************
- *
- *	SkXmSetRxCmd() - Modify the value of the XMAC's Rx Command Register
- *
- * Description:
- *	The features
- *	 - FCS stripping,					SK_STRIP_FCS_ON/OFF
- *	 - pad byte stripping,				SK_STRIP_PAD_ON/OFF
- *	 - don't set XMR_FS_ERR in status	SK_LENERR_OK_ON/OFF
- *	   for inrange length error frames
- *	 - don't set XMR_FS_ERR in status	SK_BIG_PK_OK_ON/OFF
- *	   for frames > 1514 bytes
- *   - enable Rx of own packets         SK_SELF_RX_ON/OFF
- *
- *	for incoming packets may be enabled/disabled by this function.
- *	Additional modes may be added later.
- *	Multiple modes can be enabled/disabled at the same time.
- *	The new configuration is written to the Rx Command register immediately.
- *
- * Returns:
- *	nothing
- */
-static void SkXmSetRxCmd(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		Mode)		/* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
-					   SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
-{
-	SK_U16	OldRxCmd;
-	SK_U16	RxCmd;
-
-	XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd);
-
-	RxCmd = OldRxCmd;
-	
-	switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) {
-	case SK_STRIP_FCS_ON:
-		RxCmd |= XM_RX_STRIP_FCS;
-		break;
-	case SK_STRIP_FCS_OFF:
-		RxCmd &= ~XM_RX_STRIP_FCS;
-		break;
-	}
-
-	switch (Mode & (SK_STRIP_PAD_ON | SK_STRIP_PAD_OFF)) {
-	case SK_STRIP_PAD_ON:
-		RxCmd |= XM_RX_STRIP_PAD;
-		break;
-	case SK_STRIP_PAD_OFF:
-		RxCmd &= ~XM_RX_STRIP_PAD;
-		break;
-	}
-
-	switch (Mode & (SK_LENERR_OK_ON | SK_LENERR_OK_OFF)) {
-	case SK_LENERR_OK_ON:
-		RxCmd |= XM_RX_LENERR_OK;
-		break;
-	case SK_LENERR_OK_OFF:
-		RxCmd &= ~XM_RX_LENERR_OK;
-		break;
-	}
-
-	switch (Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) {
-	case SK_BIG_PK_OK_ON:
-		RxCmd |= XM_RX_BIG_PK_OK;
-		break;
-	case SK_BIG_PK_OK_OFF:
-		RxCmd &= ~XM_RX_BIG_PK_OK;
-		break;
-	}
-
-	switch (Mode & (SK_SELF_RX_ON | SK_SELF_RX_OFF)) {
-	case SK_SELF_RX_ON:
-		RxCmd |= XM_RX_SELF_RX;
-		break;
-	case SK_SELF_RX_OFF:
-		RxCmd &= ~XM_RX_SELF_RX;
-		break;
-	}
-
-	/* Write the new mode to the Rx command register if required */
-	if (OldRxCmd != RxCmd) {
-		XM_OUT16(IoC, Port, XM_RX_CMD, RxCmd);
-	}
-}	/* SkXmSetRxCmd */
-
-
-/******************************************************************************
- *
- *	SkGmSetRxCmd() - Modify the value of the GMAC's Rx Control Register
- *
- * Description:
- *	The features
- *	 - FCS (CRC) stripping,				SK_STRIP_FCS_ON/OFF
- *	 - don't set GMR_FS_LONG_ERR		SK_BIG_PK_OK_ON/OFF
- *	   for frames > 1514 bytes
- *   - enable Rx of own packets         SK_SELF_RX_ON/OFF
- *
- *	for incoming packets may be enabled/disabled by this function.
- *	Additional modes may be added later.
- *	Multiple modes can be enabled/disabled at the same time.
- *	The new configuration is written to the Rx Command register immediately.
- *
- * Returns:
- *	nothing
- */
-static void SkGmSetRxCmd(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		Mode)		/* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF,
-					   SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */
-{
-	SK_U16	OldRxCmd;
-	SK_U16	RxCmd;
-
-	if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) {
-		
-		GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd);
-
-		RxCmd = OldRxCmd;
-
-		if ((Mode & SK_STRIP_FCS_ON) != 0) {
-			RxCmd |= GM_RXCR_CRC_DIS;
-		}
-		else {
-			RxCmd &= ~GM_RXCR_CRC_DIS;
-		}
-		/* Write the new mode to the Rx control register if required */
-		if (OldRxCmd != RxCmd) {
-			GM_OUT16(IoC, Port, GM_RX_CTRL, RxCmd);
-		}
-	}
-
-	if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) {
-		
-		GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd);
-
-		RxCmd = OldRxCmd;
-
-		if ((Mode & SK_BIG_PK_OK_ON) != 0) {
-			RxCmd |= GM_SMOD_JUMBO_ENA;
-		}
-		else {
-			RxCmd &= ~GM_SMOD_JUMBO_ENA;
-		}
-		/* Write the new mode to the Rx control register if required */
-		if (OldRxCmd != RxCmd) {
-			GM_OUT16(IoC, Port, GM_SERIAL_MODE, RxCmd);
-		}
-	}
-}	/* SkGmSetRxCmd */
-
-
-/******************************************************************************
- *
- *	SkMacSetRxCmd() - Modify the value of the MAC's Rx Control Register
- *
- * Description:	modifies the MAC's Rx Control reg. dep. on board type
- *
- * Returns:
- *	nothing
- */
-void SkMacSetRxCmd(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		Mode)		/* Rx Mode */
-{
-	if (pAC->GIni.GIGenesis) {
-		
-		SkXmSetRxCmd(pAC, IoC, Port, Mode);
-	}
-	else {
-		
-		SkGmSetRxCmd(pAC, IoC, Port, Mode);
-	}
-
-}	/* SkMacSetRxCmd */
-
-
-/******************************************************************************
- *
- *	SkMacCrcGener() - Enable / Disable CRC Generation
- *
- * Description:	enables / disables CRC generation dep. on board type
- *
- * Returns:
- *	nothing
- */
-void SkMacCrcGener(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port,	/* Port Index (MAC_1 + n) */
-SK_BOOL	Enable)	/* Enable / Disable */
-{
-	SK_U16	Word;
-
-	if (pAC->GIni.GIGenesis) {
-		
-		XM_IN16(IoC, Port, XM_TX_CMD, &Word);
-
-		if (Enable) {
-			Word &= ~XM_TX_NO_CRC;
-		}
-		else {
-			Word |= XM_TX_NO_CRC;
-		}
-		/* setup Tx Command Register */
-		XM_OUT16(IoC, Port, XM_TX_CMD, Word);
-	}
-	else {
-		
-		GM_IN16(IoC, Port, GM_TX_CTRL, &Word);
-		
-		if (Enable) {
-			Word &= ~GM_TXCR_CRC_DIS;
-		}
-		else {
-			Word |= GM_TXCR_CRC_DIS;
-		}
-		/* setup Tx Control Register */
-		GM_OUT16(IoC, Port, GM_TX_CTRL, Word);
-	}
-
-}	/* SkMacCrcGener*/
-
-#endif /* SK_DIAG */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmClrExactAddr() - Clear Exact Match Address Registers
- *
- * Description:
- *	All Exact Match Address registers of the XMAC 'Port' will be
- *	cleared starting with 'StartNum' up to (and including) the
- *	Exact Match address number of 'StopNum'.
- *
- * Returns:
- *	nothing
- */
-void SkXmClrExactAddr(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-int		StartNum,	/* Begin with this Address Register Index (0..15) */
-int		StopNum)	/* Stop after finished with this Register Idx (0..15) */
-{
-	int		i;
-	SK_U16	ZeroAddr[3] = {0x0000, 0x0000, 0x0000};
-
-	if ((unsigned)StartNum > 15 || (unsigned)StopNum > 15 ||
-		StartNum > StopNum) {
-
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E001, SKERR_HWI_E001MSG);
-		return;
-	}
-
-	for (i = StartNum; i <= StopNum; i++) {
-		XM_OUTADDR(IoC, Port, XM_EXM(i), &ZeroAddr[0]);
-	}
-}	/* SkXmClrExactAddr */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- *	SkMacFlushTxFifo() - Flush the MAC's transmit FIFO
- *
- * Description:
- *	Flush the transmit FIFO of the MAC specified by the index 'Port'
- *
- * Returns:
- *	nothing
- */
-void SkMacFlushTxFifo(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-#ifdef GENESIS
-	SK_U32	MdReg;
-
-	if (pAC->GIni.GIGenesis) {
-		
-		XM_IN32(IoC, Port, XM_MODE, &MdReg);
-
-		XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* no way to flush the FIFO we have to issue a reset */
-		/* TBD */
-	}
-#endif /* YUKON */
-
-}	/* SkMacFlushTxFifo */
-
-
-/******************************************************************************
- *
- *	SkMacFlushRxFifo() - Flush the MAC's receive FIFO
- *
- * Description:
- *	Flush the receive FIFO of the MAC specified by the index 'Port'
- *
- * Returns:
- *	nothing
- */
-static void SkMacFlushRxFifo(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-#ifdef GENESIS
-	SK_U32	MdReg;
-
-	if (pAC->GIni.GIGenesis) {
-
-		XM_IN32(IoC, Port, XM_MODE, &MdReg);
-
-		XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FRF);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* no way to flush the FIFO we have to issue a reset */
-		/* TBD */
-	}
-#endif /* YUKON */
-
-}	/* SkMacFlushRxFifo */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmSoftRst() - Do a XMAC software reset
- *
- * Description:
- *	The PHY registers should not be destroyed during this
- *	kind of software reset. Therefore the XMAC Software Reset
- *	(XM_GP_RES_MAC bit in XM_GP_PORT) must not be used!
- *
- *	The software reset is done by
- *		- disabling the Rx and Tx state machine,
- *		- resetting the statistics module,
- *		- clear all other significant XMAC Mode,
- *		  Command, and Control Registers
- *		- clearing the Hash Register and the
- *		  Exact Match Address registers, and
- *		- flushing the XMAC's Rx and Tx FIFOs.
- *
- * Note:
- *	Another requirement when stopping the XMAC is to
- *	avoid sending corrupted frames on the network.
- *	Disabling the Tx state machine will NOT interrupt
- *	the currently transmitted frame. But we must take care
- *	that the Tx FIFO is cleared AFTER the current frame
- *	is complete sent to the network.
- *
- *	It takes about 12ns to send a frame with 1538 bytes.
- *	One PCI clock goes at least 15ns (66MHz). Therefore
- *	after reading XM_GP_PORT back, we are sure that the
- *	transmitter is disabled AND idle. And this means
- *	we may flush the transmit FIFO now.
- *
- * Returns:
- *	nothing
- */
-static void SkXmSoftRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_U16	ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000};
-	
-	/* reset the statistics module */
-	XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT);
-
-	/* disable all XMAC IRQs */
-	XM_OUT16(IoC, Port, XM_IMSK, 0xffff);
-	
-	XM_OUT32(IoC, Port, XM_MODE, 0);		/* clear Mode Reg */
-	
-	XM_OUT16(IoC, Port, XM_TX_CMD, 0);		/* reset TX CMD Reg */
-	XM_OUT16(IoC, Port, XM_RX_CMD, 0);		/* reset RX CMD Reg */
-	
-	/* disable all PHY IRQs */
-	switch (pAC->GIni.GP[Port].PhyType) {
-	case SK_PHY_BCOM:
-			SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
-			break;
-#ifdef OTHER_PHY
-		case SK_PHY_LONE:
-			SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
-			break;
-		case SK_PHY_NAT:
-			/* todo: National
-			 SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
-			break;
-#endif /* OTHER_PHY */
-	}
-
-	/* clear the Hash Register */
-	XM_OUTHASH(IoC, Port, XM_HSM, &ZeroAddr);
-
-	/* clear the Exact Match Address registers */
-	SkXmClrExactAddr(pAC, IoC, Port, 0, 15);
-	
-	/* clear the Source Check Address registers */
-	XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr);
-
-}	/* SkXmSoftRst */
-
-
-/******************************************************************************
- *
- *	SkXmHardRst() - Do a XMAC hardware reset
- *
- * Description:
- *	The XMAC of the specified 'Port' and all connected devices
- *	(PHY and SERDES) will receive a reset signal on its *Reset pins.
- *	External PHYs must be reset by clearing a bit in the GPIO register
- *  (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns).
- *
- * ATTENTION:
- * 	It is absolutely necessary to reset the SW_RST Bit first
- *	before calling this function.
- *
- * Returns:
- *	nothing
- */
-static void SkXmHardRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_U32	Reg;
-	int		i;
-	int		TOut;
-	SK_U16	Word;
-
-	for (i = 0; i < 4; i++) {
-		/* TX_MFF_CTRL1 has 32 bits, but only the lowest 16 bits are used */
-		SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
-
-		TOut = 0;
-		do {
-			if (TOut++ > 10000) {
-				/*
-				 * Adapter seems to be in RESET state.
-				 * Registers cannot be written.
-				 */
-				return;
-			}
-
-			SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST);
-			
-			SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word);
-		
-		} while ((Word & MFF_SET_MAC_RST) == 0);
-	}
-
-	/* For external PHYs there must be special handling */
-	if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) {
-		
-		SK_IN32(IoC, B2_GP_IO, &Reg);
-		
-		if (Port == 0) {
-			Reg |= GP_DIR_0; 	/* set to output */
-			Reg &= ~GP_IO_0;	/* set PHY reset (active low) */
-		}
-		else {
-			Reg |= GP_DIR_2;	/* set to output */
-			Reg &= ~GP_IO_2;	/* set PHY reset (active low) */
-		}
-		/* reset external PHY */
-		SK_OUT32(IoC, B2_GP_IO, Reg);
-
-		/* short delay */
-		SK_IN32(IoC, B2_GP_IO, &Reg);
-	}
-}	/* SkXmHardRst */
-
-
-/******************************************************************************
- *
- *	SkXmClearRst() - Release the PHY & XMAC reset
- *
- * Description:
- *
- * Returns:
- *	nothing
- */
-static void SkXmClearRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_U32	DWord;
-	
-	/* clear HW reset */
-	SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
-
-	if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) {
-
-		SK_IN32(IoC, B2_GP_IO, &DWord);
-
-		if (Port == 0) {
-			DWord |= (GP_DIR_0 | GP_IO_0); /* set to output */
-		}
-		else {
-			DWord |= (GP_DIR_2 | GP_IO_2); /* set to output */
-		}
-		/* Clear PHY reset */
-		SK_OUT32(IoC, B2_GP_IO, DWord);
-
-		/* Enable GMII interface */
-		XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_GMII_MD);
-	}
-}	/* SkXmClearRst */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkGmSoftRst() - Do a GMAC software reset
- *
- * Description:
- *	The GPHY registers should not be destroyed during this
- *	kind of software reset.
- *
- * Returns:
- *	nothing
- */
-static void SkGmSoftRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_U16	EmptyHash[4] = {0x0000, 0x0000, 0x0000, 0x0000};
-	SK_U16  RxCtrl;
-
-	/* reset the statistics module */
-
-	/* disable all GMAC IRQs */
-	SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
-	
-	/* disable all PHY IRQs */
-	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
-	
-	/* clear the Hash Register */
-	GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash);
-
-	/* Enable Unicast and Multicast filtering */
-	GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl);
-	
-	GM_OUT16(IoC, Port, GM_RX_CTRL,
-		(SK_U16)(RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA));
-
-}	/* SkGmSoftRst */
-
-
-/******************************************************************************
- *
- *	SkGmHardRst() - Do a GMAC hardware reset
- *
- * Description:
- *
- * Returns:
- *	nothing
- */
-static void SkGmHardRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_U32	DWord;
-	
-	/* WA code for COMA mode */
-	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
-		
-		SK_IN32(IoC, B2_GP_IO, &DWord);
-
-		DWord |= (GP_DIR_9 | GP_IO_9);
-
-		/* set PHY reset */
-		SK_OUT32(IoC, B2_GP_IO, DWord);
-	}
-
-	/* set GPHY Control reset */
-	SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET);
-
-	/* set GMAC Control reset */
-	SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
-
-}	/* SkGmHardRst */
-
-
-/******************************************************************************
- *
- *	SkGmClearRst() - Release the GPHY & GMAC reset
- *
- * Description:
- *
- * Returns:
- *	nothing
- */
-static void SkGmClearRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_U32	DWord;
-	
-#ifdef XXX
-		/* clear GMAC Control reset */
-		SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_CLR);
-
-		/* set GMAC Control reset */
-		SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET);
-#endif /* XXX */
-
-	/* WA code for COMA mode */
-	if (pAC->GIni.GIYukonLite &&
-		pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
-		
-		SK_IN32(IoC, B2_GP_IO, &DWord);
-
-		DWord |= GP_DIR_9;		/* set to output */
-		DWord &= ~GP_IO_9;		/* clear PHY reset (active high) */
-
-		/* clear PHY reset */
-		SK_OUT32(IoC, B2_GP_IO, DWord);
-	}
-
-	/* set HWCFG_MODE */
-	DWord = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
-		GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE |
-		(pAC->GIni.GICopperType ? GPC_HWCFG_GMII_COP :
-		GPC_HWCFG_GMII_FIB);
-
-	/* set GPHY Control reset */
-	SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_SET);
-
-	/* release GPHY Control reset */
-	SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_CLR);
-
-#ifdef VCPU
-	VCpuWait(9000);
-#endif /* VCPU */
-
-	/* clear GMAC Control reset */
-	SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
-
-#ifdef VCPU
-	VCpuWait(2000);
-	
-	SK_IN32(IoC, MR_ADDR(Port, GPHY_CTRL), &DWord);
-			
-	SK_IN32(IoC, B0_ISRC, &DWord);
-#endif /* VCPU */
-
-}	/* SkGmClearRst */
-#endif /* YUKON */
-
-
-/******************************************************************************
- *
- *	SkMacSoftRst() - Do a MAC software reset
- *
- * Description:	calls a MAC software reset routine dep. on board type
- *
- * Returns:
- *	nothing
- */
-void SkMacSoftRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* disable receiver and transmitter */
-	SkMacRxTxDisable(pAC, IoC, Port);
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		SkXmSoftRst(pAC, IoC, Port);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		SkGmSoftRst(pAC, IoC, Port);
-	}
-#endif /* YUKON */
-
-	/* flush the MAC's Rx and Tx FIFOs */
-	SkMacFlushTxFifo(pAC, IoC, Port);
-	
-	SkMacFlushRxFifo(pAC, IoC, Port);
-
-	pPrt->PState = SK_PRT_STOP;
-
-}	/* SkMacSoftRst */
-
-
-/******************************************************************************
- *
- *	SkMacHardRst() - Do a MAC hardware reset
- *
- * Description:	calls a MAC hardware reset routine dep. on board type
- *
- * Returns:
- *	nothing
- */
-void SkMacHardRst(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port)	/* Port Index (MAC_1 + n) */
-{
-	
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		SkXmHardRst(pAC, IoC, Port);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		SkGmHardRst(pAC, IoC, Port);
-	}
-#endif /* YUKON */
-
-	pAC->GIni.GP[Port].PState = SK_PRT_RESET;
-
-}	/* SkMacHardRst */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmInitMac() - Initialize the XMAC II
- *
- * Description:
- *	Initialize the XMAC of the specified port.
- *	The XMAC must be reset or stopped before calling this function.
- *
- * Note:
- *	The XMAC's Rx and Tx state machine is still disabled when returning.
- *
- * Returns:
- *	nothing
- */
-void SkXmInitMac(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	int			i;
-	SK_U16		SWord;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PState == SK_PRT_STOP) {
-		/* Port State: SK_PRT_STOP */
-		/* Verify that the reset bit is cleared */
-		SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord);
-
-		if ((SWord & MFF_SET_MAC_RST) != 0) {
-			/* PState does not match HW state */
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
-			/* Correct it */
-			pPrt->PState = SK_PRT_RESET;
-		}
-	}
-
-	if (pPrt->PState == SK_PRT_RESET) {
-
-		SkXmClearRst(pAC, IoC, Port);
-
-		if (pPrt->PhyType != SK_PHY_XMAC) {
-			/* read Id from external PHY (all have the same address) */
-			SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_ID1, &pPrt->PhyId1);
-
-			/*
-			 * Optimize MDIO transfer by suppressing preamble.
-			 * Must be done AFTER first access to BCOM chip.
-			 */
-			XM_IN16(IoC, Port, XM_MMU_CMD, &SWord);
-			
-			XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE);
-
-			if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) {
-				/*
-				 * Workaround BCOM Errata for the C0 type.
-				 * Write magic patterns to reserved registers.
-				 */
-				i = 0;
-				while (BcomRegC0Hack[i].PhyReg != 0) {
-					SkXmPhyWrite(pAC, IoC, Port, BcomRegC0Hack[i].PhyReg,
-						BcomRegC0Hack[i].PhyVal);
-					i++;
-				}
-			}
-			else if (pPrt->PhyId1 == PHY_BCOM_ID1_A1) {
-				/*
-				 * Workaround BCOM Errata for the A1 type.
-				 * Write magic patterns to reserved registers.
-				 */
-				i = 0;
-				while (BcomRegA1Hack[i].PhyReg != 0) {
-					SkXmPhyWrite(pAC, IoC, Port, BcomRegA1Hack[i].PhyReg,
-						BcomRegA1Hack[i].PhyVal);
-					i++;
-				}
-			}
-
-			/*
-			 * Workaround BCOM Errata (#10523) for all BCom PHYs.
-			 * Disable Power Management after reset.
-			 */
-			SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
-			
-			SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
-				(SK_U16)(SWord | PHY_B_AC_DIS_PM));
-
-			/* PHY LED initialization is done in SkGeXmitLED() */
-		}
-
-		/* Dummy read the Interrupt source register */
-		XM_IN16(IoC, Port, XM_ISRC, &SWord);
-		
-		/*
-		 * The auto-negotiation process starts immediately after
-		 * clearing the reset. The auto-negotiation process should be
-		 * started by the SIRQ, therefore stop it here immediately.
-		 */
-		SkMacInitPhy(pAC, IoC, Port, SK_FALSE);
-
-#ifdef TEST_ONLY
-		/* temp. code: enable signal detect */
-		/* WARNING: do not override GMII setting above */
-		XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_COM4SIG);
-#endif
-	}
-
-	/*
-	 * configure the XMACs Station Address
-	 * B2_MAC_2 = xx xx xx xx xx x1 is programmed to XMAC A
-	 * B2_MAC_3 = xx xx xx xx xx x2 is programmed to XMAC B
-	 */
-	for (i = 0; i < 3; i++) {
-		/*
-		 * The following 2 statements are together endianess
-		 * independent. Remember this when changing.
-		 */
-		SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
-		
-		XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord);
-	}
-
-	/* Tx Inter Packet Gap (XM_TX_IPG):	use default */
-	/* Tx High Water Mark (XM_TX_HI_WM):	use default */
-	/* Tx Low Water Mark (XM_TX_LO_WM):	use default */
-	/* Host Request Threshold (XM_HT_THR):	use default */
-	/* Rx Request Threshold (XM_RX_THR):	use default */
-	/* Rx Low Water Mark (XM_RX_LO_WM):	use default */
-
-	/* configure Rx High Water Mark (XM_RX_HI_WM) */
-	XM_OUT16(IoC, Port, XM_RX_HI_WM, SK_XM_RX_HI_WM);
-
-	/* Configure Tx Request Threshold */
-	SWord = SK_XM_THR_SL;				/* for single port */
-
-	if (pAC->GIni.GIMacsFound > 1) {
-		switch (pAC->GIni.GIPortUsage) {
-		case SK_RED_LINK:
-			SWord = SK_XM_THR_REDL;		/* redundant link */
-			break;
-		case SK_MUL_LINK:
-			SWord = SK_XM_THR_MULL;		/* load balancing */
-			break;
-		case SK_JUMBO_LINK:
-			SWord = SK_XM_THR_JUMBO;	/* jumbo frames */
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E014, SKERR_HWI_E014MSG);
-			break;
-		}
-	}
-	XM_OUT16(IoC, Port, XM_TX_THR, SWord);
-
-	/* setup register defaults for the Tx Command Register */
-	XM_OUT16(IoC, Port, XM_TX_CMD, XM_TX_AUTO_PAD);
-
-	/* setup register defaults for the Rx Command Register */
-	SWord = XM_RX_STRIP_FCS | XM_RX_LENERR_OK;
-
-	if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
-		SWord |= XM_RX_BIG_PK_OK;
-	}
-
-	if (pPrt->PLinkMode == SK_LMODE_HALF) {
-		/*
-		 * If in manual half duplex mode the other side might be in
-		 * full duplex mode, so ignore if a carrier extension is not seen
-		 * on frames received
-		 */
-		SWord |= XM_RX_DIS_CEXT;
-	}
-	
-	XM_OUT16(IoC, Port, XM_RX_CMD, SWord);
-
-	/*
-	 * setup register defaults for the Mode Register
-	 *	- Don't strip error frames to avoid Store & Forward
-	 *	  on the Rx side.
-	 *	- Enable 'Check Station Address' bit
-	 *	- Enable 'Check Address Array' bit
-	 */
-	XM_OUT32(IoC, Port, XM_MODE, XM_DEF_MODE);
-
-	/*
-	 * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK)
-	 *	- Enable all bits excepting 'Octets Rx OK Low CntOv'
-	 *	  and 'Octets Rx OK Hi Cnt Ov'.
-	 */
-	XM_OUT32(IoC, Port, XM_RX_EV_MSK, XMR_DEF_MSK);
-
-	/*
-	 * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK)
-	 *	- Enable all bits excepting 'Octets Tx OK Low CntOv'
-	 *	  and 'Octets Tx OK Hi Cnt Ov'.
-	 */
-	XM_OUT32(IoC, Port, XM_TX_EV_MSK, XMT_DEF_MSK);
-
-	/*
-	 * Do NOT init XMAC interrupt mask here.
-	 * All interrupts remain disable until link comes up!
-	 */
-
-	/*
-	 * Any additional configuration changes may be done now.
-	 * The last action is to enable the Rx and Tx state machine.
-	 * This should be done after the auto-negotiation process
-	 * has been completed successfully.
-	 */
-}	/* SkXmInitMac */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkGmInitMac() - Initialize the GMAC
- *
- * Description:
- *	Initialize the GMAC of the specified port.
- *	The GMAC must be reset or stopped before calling this function.
- *
- * Note:
- *	The GMAC's Rx and Tx state machine is still disabled when returning.
- *
- * Returns:
- *	nothing
- */
-void SkGmInitMac(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	int			i;
-	SK_U16		SWord;
-	SK_U32		DWord;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PState == SK_PRT_STOP) {
-		/* Port State: SK_PRT_STOP */
-		/* Verify that the reset bit is cleared */
-		SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord);
-		
-		if ((DWord & GMC_RST_SET) != 0) {
-			/* PState does not match HW state */
-			SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG);
-			/* Correct it */
-			pPrt->PState = SK_PRT_RESET;
-		}
-	}
-
-	if (pPrt->PState == SK_PRT_RESET) {
-		
-		SkGmHardRst(pAC, IoC, Port);
-
-		SkGmClearRst(pAC, IoC, Port);
-		
-		/* Auto-negotiation ? */
-		if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-			/* Auto-negotiation disabled */
-
-			/* get General Purpose Control */
-			GM_IN16(IoC, Port, GM_GP_CTRL, &SWord);
-
-			/* disable auto-update for speed, duplex and flow-control */
-			SWord |= GM_GPCR_AU_ALL_DIS;
-			
-			/* setup General Purpose Control Register */
-			GM_OUT16(IoC, Port, GM_GP_CTRL, SWord);
-			
-			SWord = GM_GPCR_AU_ALL_DIS;
-		}
-		else {
-			SWord = 0;
-		}
-
-		/* speed settings */
-		switch (pPrt->PLinkSpeed) {
-		case SK_LSPEED_AUTO:
-		case SK_LSPEED_1000MBPS:
-			SWord |= GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100;
-			break;
-		case SK_LSPEED_100MBPS:
-			SWord |= GM_GPCR_SPEED_100;
-			break;
-		case SK_LSPEED_10MBPS:
-			break;
-		}
-
-		/* duplex settings */
-		if (pPrt->PLinkMode != SK_LMODE_HALF) {
-			/* set full duplex */
-			SWord |= GM_GPCR_DUP_FULL;
-		}
-
-		/* flow-control settings */
-		switch (pPrt->PFlowCtrlMode) {
-		case SK_FLOW_MODE_NONE:
-			/* set Pause Off */
-			SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_OFF);
-			/* disable Tx & Rx flow-control */
-			SWord |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
-			break;
-		case SK_FLOW_MODE_LOC_SEND:
-			/* disable Rx flow-control */
-			SWord |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
-			break;
-		case SK_FLOW_MODE_SYMMETRIC:
-		case SK_FLOW_MODE_SYM_OR_REM:
-			/* enable Tx & Rx flow-control */
-			break;
-		}
-
-		/* setup General Purpose Control Register */
-		GM_OUT16(IoC, Port, GM_GP_CTRL, SWord);
-
-		/* dummy read the Interrupt Source Register */
-		SK_IN16(IoC, GMAC_IRQ_SRC, &SWord);
-		
-#ifndef VCPU
-		/* read Id from PHY */
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1);
-		
-		SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE);
-#endif /* VCPU */
-	}
-
-	(void)SkGmResetCounter(pAC, IoC, Port);
-
-	/* setup Transmit Control Register */
-	GM_OUT16(IoC, Port, GM_TX_CTRL, TX_COL_THR(pPrt->PMacColThres));
-
-	/* setup Receive Control Register */
-	GM_OUT16(IoC, Port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA |
-		GM_RXCR_CRC_DIS);
-
-	/* setup Transmit Flow Control Register */
-	GM_OUT16(IoC, Port, GM_TX_FLOW_CTRL, 0xffff);
-
-	/* setup Transmit Parameter Register */
-#ifdef VCPU
-	GM_IN16(IoC, Port, GM_TX_PARAM, &SWord);
-#endif /* VCPU */
-
-    SWord = TX_JAM_LEN_VAL(pPrt->PMacJamLen) |
-			TX_JAM_IPG_VAL(pPrt->PMacJamIpgVal) |
-			TX_IPG_JAM_DATA(pPrt->PMacJamIpgData);
-	
-	GM_OUT16(IoC, Port, GM_TX_PARAM, SWord);
-
-	/* configure the Serial Mode Register */
-#ifdef VCPU
-	GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord);
-#endif /* VCPU */
-	
-	SWord = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(pPrt->PMacIpgData);
-
-	if (pPrt->PMacLimit4) {
-		/* reset of collision counter after 4 consecutive collisions */
-		SWord |= GM_SMOD_LIMIT_4;
-	}
-
-	if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
-		/* enable jumbo mode (Max. Frame Length = 9018) */
-		SWord |= GM_SMOD_JUMBO_ENA;
-	}
-	
-	GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord);
-	
-	/*
-	 * configure the GMACs Station Addresses
-	 * in PROM you can find our addresses at:
-	 * B2_MAC_1 = xx xx xx xx xx x0 virtual address
-	 * B2_MAC_2 = xx xx xx xx xx x1 is programmed to GMAC A
-	 * B2_MAC_3 = xx xx xx xx xx x2 is reserved for DualPort
-	 */
-
-	for (i = 0; i < 3; i++) {
-		/*
-		 * The following 2 statements are together endianess
-		 * independent. Remember this when changing.
-		 */
-		/* physical address: will be used for pause frames */
-		SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord);
-
-#ifdef WA_DEV_16
-		/* WA for deviation #16 */
-		if (pAC->GIni.GIChipId == CHIP_ID_YUKON && pAC->GIni.GIChipRev == 0) {
-			/* swap the address bytes */
-			SWord = ((SWord & 0xff00) >> 8)	| ((SWord & 0x00ff) << 8);
-
-			/* write to register in reversed order */
-			GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + (2 - i) * 4), SWord);
-		}
-		else {
-			GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
-		}
-#else		
-		GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord);
-#endif /* WA_DEV_16 */
-		
-		/* virtual address: will be used for data */
-		SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord);
-
-		GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord);
-		
-		/* reset Multicast filtering Hash registers 1-3 */
-		GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0);
-	}
-
-	/* reset Multicast filtering Hash register 4 */
-	GM_OUT16(IoC, Port, GM_MC_ADDR_H4, 0);
-
-	/* enable interrupt mask for counter overflows */
-	GM_OUT16(IoC, Port, GM_TX_IRQ_MSK, 0);
-	GM_OUT16(IoC, Port, GM_RX_IRQ_MSK, 0);
-	GM_OUT16(IoC, Port, GM_TR_IRQ_MSK, 0);
-
-#if defined(SK_DIAG) || defined(DEBUG)
-	/* read General Purpose Status */
-	GM_IN16(IoC, Port, GM_GP_STAT, &SWord);
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("MAC Stat Reg.=0x%04X\n", SWord));
-#endif /* SK_DIAG || DEBUG */
-
-#ifdef SK_DIAG
-	c_print("MAC Stat Reg=0x%04X\n", SWord);
-#endif /* SK_DIAG */
-
-}	/* SkGmInitMac */
-#endif /* YUKON */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmInitDupMd() - Initialize the XMACs Duplex Mode
- *
- * Description:
- *	This function initializes the XMACs Duplex Mode.
- *	It should be called after successfully finishing
- *	the Auto-negotiation Process
- *
- * Returns:
- *	nothing
- */
-static void SkXmInitDupMd(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	switch (pAC->GIni.GP[Port].PLinkModeStatus) {
-	case SK_LMODE_STAT_AUTOHALF:
-	case SK_LMODE_STAT_HALF:
-		/* Configuration Actions for Half Duplex Mode */
-		/*
-		 * XM_BURST = default value. We are probable not quick
-		 * 	enough at the 'XMAC' bus to burst 8kB.
-		 *	The XMAC stops bursting if no transmit frames
-		 *	are available or the burst limit is exceeded.
-		 */
-		/* XM_TX_RT_LIM = default value (15) */
-		/* XM_TX_STIME = default value (0xff = 4096 bit times) */
-		break;
-	case SK_LMODE_STAT_AUTOFULL:
-	case SK_LMODE_STAT_FULL:
-		/* Configuration Actions for Full Duplex Mode */
-		/*
-		 * The duplex mode is configured by the PHY,
-		 * therefore it seems to be that there is nothing
-		 * to do here.
-		 */
-		break;
-	case SK_LMODE_STAT_UNKNOWN:
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E007, SKERR_HWI_E007MSG);
-		break;
-	}
-}	/* SkXmInitDupMd */
-
-
-/******************************************************************************
- *
- *	SkXmInitPauseMd() - initialize the Pause Mode to be used for this port
- *
- * Description:
- *	This function initializes the Pause Mode which should
- *	be used for this port.
- *	It should be called after successfully finishing
- *	the Auto-negotiation Process
- *
- * Returns:
- *	nothing
- */
-static void SkXmInitPauseMd(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U32		DWord;
-	SK_U16		Word;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
-	
-	if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE ||
-		pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
-
-		/* Disable Pause Frame Reception */
-		Word |= XM_MMU_IGN_PF;
-	}
-	else {
-		/*
-		 * enabling pause frame reception is required for 1000BT
-		 * because the XMAC is not reset if the link is going down
-		 */
-		/* Enable Pause Frame Reception */
-		Word &= ~XM_MMU_IGN_PF;
-	}	
-	
-	XM_OUT16(IoC, Port, XM_MMU_CMD, Word);
-
-	XM_IN32(IoC, Port, XM_MODE, &DWord);
-
-	if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_SYMMETRIC ||
-		pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) {
-
-		/*
-		 * Configure Pause Frame Generation
-		 * Use internal and external Pause Frame Generation.
-		 * Sending pause frames is edge triggered.
-		 * Send a Pause frame with the maximum pause time if
-		 * internal oder external FIFO full condition occurs.
-		 * Send a zero pause time frame to re-start transmission.
-		 */
-
-		/* XM_PAUSE_DA = '010000C28001' (default) */
-
-		/* XM_MAC_PTIME = 0xffff (maximum) */
-		/* remember this value is defined in big endian (!) */
-		XM_OUT16(IoC, Port, XM_MAC_PTIME, 0xffff);
-
-		/* Set Pause Mode in Mode Register */
-		DWord |= XM_PAUSE_MODE;
-
-		/* Set Pause Mode in MAC Rx FIFO */
-		SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_PAUSE);
-	}
-	else {
-		/*
-		 * disable pause frame generation is required for 1000BT
-		 * because the XMAC is not reset if the link is going down
-		 */
-		/* Disable Pause Mode in Mode Register */
-		DWord &= ~XM_PAUSE_MODE;
-
-		/* Disable Pause Mode in MAC Rx FIFO */
-		SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE);
-	}
-	
-	XM_OUT32(IoC, Port, XM_MODE, DWord);
-}	/* SkXmInitPauseMd*/
-
-
-/******************************************************************************
- *
- *	SkXmInitPhyXmac() - Initialize the XMAC Phy registers
- *
- * Description:	initializes all the XMACs Phy registers
- *
- * Note:
- *
- * Returns:
- *	nothing
- */
-static void SkXmInitPhyXmac(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		Ctrl;
-
-	pPrt = &pAC->GIni.GP[Port];
-	Ctrl = 0;
-	
-	/* Auto-negotiation ? */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("InitPhyXmac: no auto-negotiation Port %d\n", Port));
-		/* Set DuplexMode in Config register */
-		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			Ctrl |= PHY_CT_DUP_MD;
-		}
-
-		/*
-		 * Do NOT enable Auto-negotiation here. This would hold
-		 * the link down because no IDLEs are transmitted
-		 */
-	}
-	else {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("InitPhyXmac: with auto-negotiation Port %d\n", Port));
-		/* Set Auto-negotiation advertisement */
-
-		/* Set Full/half duplex capabilities */
-		switch (pPrt->PLinkMode) {
-		case SK_LMODE_AUTOHALF:
-			Ctrl |= PHY_X_AN_HD;
-			break;
-		case SK_LMODE_AUTOFULL:
-			Ctrl |= PHY_X_AN_FD;
-			break;
-		case SK_LMODE_AUTOBOTH:
-			Ctrl |= PHY_X_AN_FD | PHY_X_AN_HD;
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
-				SKERR_HWI_E015MSG);
-		}
-
-		/* Set Flow-control capabilities */
-		switch (pPrt->PFlowCtrlMode) {
-		case SK_FLOW_MODE_NONE:
-			Ctrl |= PHY_X_P_NO_PAUSE;
-			break;
-		case SK_FLOW_MODE_LOC_SEND:
-			Ctrl |= PHY_X_P_ASYM_MD;
-			break;
-		case SK_FLOW_MODE_SYMMETRIC:
-			Ctrl |= PHY_X_P_SYM_MD;
-			break;
-		case SK_FLOW_MODE_SYM_OR_REM:
-			Ctrl |= PHY_X_P_BOTH_MD;
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
-				SKERR_HWI_E016MSG);
-		}
-
-		/* Write AutoNeg Advertisement Register */
-		SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_AUNE_ADV, Ctrl);
-
-		/* Restart Auto-negotiation */
-		Ctrl = PHY_CT_ANE | PHY_CT_RE_CFG;
-	}
-
-	if (DoLoop) {
-		/* Set the Phy Loopback bit, too */
-		Ctrl |= PHY_CT_LOOP;
-	}
-
-	/* Write to the Phy control register */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_CTRL, Ctrl);
-}	/* SkXmInitPhyXmac */
-
-
-/******************************************************************************
- *
- *	SkXmInitPhyBcom() - Initialize the Broadcom Phy registers
- *
- * Description:	initializes all the Broadcom Phy registers
- *
- * Note:
- *
- * Returns:
- *	nothing
- */
-static void SkXmInitPhyBcom(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		Ctrl1;
-	SK_U16		Ctrl2;
-	SK_U16		Ctrl3;
-	SK_U16		Ctrl4;
-	SK_U16		Ctrl5;
-
-	Ctrl1 = PHY_CT_SP1000;
-	Ctrl2 = 0;
-	Ctrl3 = PHY_SEL_TYPE;
-	Ctrl4 = PHY_B_PEC_EN_LTR;
-	Ctrl5 = PHY_B_AC_TX_TST;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* manually Master/Slave ? */
-	if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
-		Ctrl2 |= PHY_B_1000C_MSE;
-		
-		if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
-			Ctrl2 |= PHY_B_1000C_MSC;
-		}
-	}
-	/* Auto-negotiation ? */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("InitPhyBcom: no auto-negotiation Port %d\n", Port));
-		/* Set DuplexMode in Config register */
-		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			Ctrl1 |= PHY_CT_DUP_MD;
-		}
-
-		/* Determine Master/Slave manually if not already done */
-		if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
-			Ctrl2 |= PHY_B_1000C_MSE;	/* set it to Slave */
-		}
-
-		/*
-		 * Do NOT enable Auto-negotiation here. This would hold
-		 * the link down because no IDLES are transmitted
-		 */
-	}
-	else {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("InitPhyBcom: with auto-negotiation Port %d\n", Port));
-		/* Set Auto-negotiation advertisement */
-
-		/*
-		 * Workaround BCOM Errata #1 for the C5 type.
-		 * 1000Base-T Link Acquisition Failure in Slave Mode
-		 * Set Repeater/DTE bit 10 of the 1000Base-T Control Register
-		 */
-		Ctrl2 |= PHY_B_1000C_RD;
-		
-		 /* Set Full/half duplex capabilities */
-		switch (pPrt->PLinkMode) {
-		case SK_LMODE_AUTOHALF:
-			Ctrl2 |= PHY_B_1000C_AHD;
-			break;
-		case SK_LMODE_AUTOFULL:
-			Ctrl2 |= PHY_B_1000C_AFD;
-			break;
-		case SK_LMODE_AUTOBOTH:
-			Ctrl2 |= PHY_B_1000C_AFD | PHY_B_1000C_AHD;
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
-				SKERR_HWI_E015MSG);
-		}
-
-		/* Set Flow-control capabilities */
-		switch (pPrt->PFlowCtrlMode) {
-		case SK_FLOW_MODE_NONE:
-			Ctrl3 |= PHY_B_P_NO_PAUSE;
-			break;
-		case SK_FLOW_MODE_LOC_SEND:
-			Ctrl3 |= PHY_B_P_ASYM_MD;
-			break;
-		case SK_FLOW_MODE_SYMMETRIC:
-			Ctrl3 |= PHY_B_P_SYM_MD;
-			break;
-		case SK_FLOW_MODE_SYM_OR_REM:
-			Ctrl3 |= PHY_B_P_BOTH_MD;
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
-				SKERR_HWI_E016MSG);
-		}
-
-		/* Restart Auto-negotiation */
-		Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
-	}
-	
-	/* Initialize LED register here? */
-	/* No. Please do it in SkDgXmitLed() (if required) and swap
-	   init order of LEDs and XMAC. (MAl) */
-	
-	/* Write 1000Base-T Control Register */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Set 1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
-	
-	/* Write AutoNeg Advertisement Register */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Set Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3));
-	
-	if (DoLoop) {
-		/* Set the Phy Loopback bit, too */
-		Ctrl1 |= PHY_CT_LOOP;
-	}
-
-	if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
-		/* configure FIFO to high latency for transmission of ext. packets */
-		Ctrl4 |= PHY_B_PEC_HIGH_LA;
-
-		/* configure reception of extended packets */
-		Ctrl5 |= PHY_B_AC_LONG_PACK;
-
-		SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, Ctrl5);
-	}
-
-	/* Configure LED Traffic Mode and Jumbo Frame usage if specified */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4);
-	
-	/* Write to the Phy control register */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("PHY Control Reg=0x%04X\n", Ctrl1));
-}	/* SkXmInitPhyBcom */
-#endif /* GENESIS */
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkGmInitPhyMarv() - Initialize the Marvell Phy registers
- *
- * Description:	initializes all the Marvell Phy registers
- *
- * Note:
- *
- * Returns:
- *	nothing
- */
-static void SkGmInitPhyMarv(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		PhyCtrl;
-	SK_U16		C1000BaseT;
-	SK_U16		AutoNegAdv;
-	SK_U16		ExtPhyCtrl;
-	SK_U16		LedCtrl;
-	SK_BOOL		AutoNeg;
-#if defined(SK_DIAG) || defined(DEBUG)
-	SK_U16		PhyStat;
-	SK_U16		PhyStat1;
-	SK_U16		PhySpecStat;
-#endif /* SK_DIAG || DEBUG */
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Auto-negotiation ? */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		AutoNeg = SK_FALSE;
-	}
-	else {
-		AutoNeg = SK_TRUE;
-	}
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("InitPhyMarv: Port %d, auto-negotiation %s\n",
-		 Port, AutoNeg ? "ON" : "OFF"));
-
-#ifdef VCPU
-	VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n",
-		Port, DoLoop);
-#else /* VCPU */
-	if (DoLoop) {
-		/* Set 'MAC Power up'-bit, set Manual MDI configuration */
-		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL,
-			PHY_M_PC_MAC_POW_UP);
-	}
-	else if (AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_AUTO) {
-		/* Read Ext. PHY Specific Control */
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
-		
-		ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
-			PHY_M_EC_MAC_S_MSK);
-		
-		ExtPhyCtrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ) |
-			PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
-	
-		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl);
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Set Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl));
-	}
-
-	/* Read PHY Control */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
-
-	if (!AutoNeg) {
-		/* Disable Auto-negotiation */
-		PhyCtrl &= ~PHY_CT_ANE;
-	}
-
-	PhyCtrl |= PHY_CT_RESET;
-	/* Assert software reset */
-	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl);
-#endif /* VCPU */
-
-	PhyCtrl = 0 /* PHY_CT_COL_TST */;
-	C1000BaseT = 0;
-	AutoNegAdv = PHY_SEL_TYPE;
-
-	/* manually Master/Slave ? */
-	if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
-		/* enable Manual Master/Slave */
-		C1000BaseT |= PHY_M_1000C_MSE;
-		
-		if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
-			C1000BaseT |= PHY_M_1000C_MSC;	/* set it to Master */
-		}
-	}
-	
-	/* Auto-negotiation ? */
-	if (!AutoNeg) {
-		
-		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			/* Set Full Duplex Mode */
-			PhyCtrl |= PHY_CT_DUP_MD;
-		}
-
-		/* Set Master/Slave manually if not already done */
-		if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
-			C1000BaseT |= PHY_M_1000C_MSE;	/* set it to Slave */
-		}
-
-		/* Set Speed */
-		switch (pPrt->PLinkSpeed) {
-		case SK_LSPEED_AUTO:
-		case SK_LSPEED_1000MBPS:
-			PhyCtrl |= PHY_CT_SP1000;
-			break;
-		case SK_LSPEED_100MBPS:
-			PhyCtrl |= PHY_CT_SP100;
-			break;
-		case SK_LSPEED_10MBPS:
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
-				SKERR_HWI_E019MSG);
-		}
-
-		if (!DoLoop) {
-			PhyCtrl |= PHY_CT_RESET;
-		}
-	}
-	else {
-		/* Set Auto-negotiation advertisement */
-		
-		if (pAC->GIni.GICopperType) {
-			/* Set Speed capabilities */
-			switch (pPrt->PLinkSpeed) {
-			case SK_LSPEED_AUTO:
-				C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
-				AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
-					PHY_M_AN_10_FD | PHY_M_AN_10_HD;
-				break;
-			case SK_LSPEED_1000MBPS:
-				C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD;
-				break;
-			case SK_LSPEED_100MBPS:
-				AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD |
-					/* advertise 10Base-T also */
-					PHY_M_AN_10_FD | PHY_M_AN_10_HD;
-				break;
-			case SK_LSPEED_10MBPS:
-				AutoNegAdv |= PHY_M_AN_10_FD | PHY_M_AN_10_HD;
-				break;
-			default:
-				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019,
-					SKERR_HWI_E019MSG);
-			}
-
-			/* Set Full/half duplex capabilities */
-			switch (pPrt->PLinkMode) {
-			case SK_LMODE_AUTOHALF:
-				C1000BaseT &= ~PHY_M_1000C_AFD;
-				AutoNegAdv &= ~(PHY_M_AN_100_FD | PHY_M_AN_10_FD);
-				break;
-			case SK_LMODE_AUTOFULL:
-				C1000BaseT &= ~PHY_M_1000C_AHD;
-				AutoNegAdv &= ~(PHY_M_AN_100_HD | PHY_M_AN_10_HD);
-				break;
-			case SK_LMODE_AUTOBOTH:
-				break;
-			default:
-				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
-					SKERR_HWI_E015MSG);
-			}
-			
-			/* Set Flow-control capabilities */
-			switch (pPrt->PFlowCtrlMode) {
-			case SK_FLOW_MODE_NONE:
-				AutoNegAdv |= PHY_B_P_NO_PAUSE;
-				break;
-			case SK_FLOW_MODE_LOC_SEND:
-				AutoNegAdv |= PHY_B_P_ASYM_MD;
-				break;
-			case SK_FLOW_MODE_SYMMETRIC:
-				AutoNegAdv |= PHY_B_P_SYM_MD;
-				break;
-			case SK_FLOW_MODE_SYM_OR_REM:
-				AutoNegAdv |= PHY_B_P_BOTH_MD;
-				break;
-			default:
-				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
-					SKERR_HWI_E016MSG);
-			}
-		}
-		else {	/* special defines for FIBER (88E1011S only) */
-			
-			/* Set Full/half duplex capabilities */
-			switch (pPrt->PLinkMode) {
-			case SK_LMODE_AUTOHALF:
-				AutoNegAdv |= PHY_M_AN_1000X_AHD;
-				break;
-			case SK_LMODE_AUTOFULL:
-				AutoNegAdv |= PHY_M_AN_1000X_AFD;
-				break;
-			case SK_LMODE_AUTOBOTH:
-				AutoNegAdv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
-				break;
-			default:
-				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
-					SKERR_HWI_E015MSG);
-			}
-			
-			/* Set Flow-control capabilities */
-			switch (pPrt->PFlowCtrlMode) {
-			case SK_FLOW_MODE_NONE:
-				AutoNegAdv |= PHY_M_P_NO_PAUSE_X;
-				break;
-			case SK_FLOW_MODE_LOC_SEND:
-				AutoNegAdv |= PHY_M_P_ASYM_MD_X;
-				break;
-			case SK_FLOW_MODE_SYMMETRIC:
-				AutoNegAdv |= PHY_M_P_SYM_MD_X;
-				break;
-			case SK_FLOW_MODE_SYM_OR_REM:
-				AutoNegAdv |= PHY_M_P_BOTH_MD_X;
-				break;
-			default:
-				SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
-					SKERR_HWI_E016MSG);
-			}
-		}
-
-		if (!DoLoop) {
-			/* Restart Auto-negotiation */
-			PhyCtrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
-		}
-	}
-	
-#ifdef VCPU
-	/*
-	 * E-mail from Gu Lin (08-03-2002):
-	 */
-	
-	/* Program PHY register 30 as 16'h0708 for simulation speed up */
-	SkGmPhyWrite(pAC, IoC, Port, 30, 0x0700 /* 0x0708 */);
-	
-	VCpuWait(2000);
-
-#else /* VCPU */
-	
-	/* Write 1000Base-T Control Register */
-	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Set 1000B-T Ctrl =0x%04X\n", C1000BaseT));
-	
-	/* Write AutoNeg Advertisement Register */
-	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Set Auto-Neg.Adv.=0x%04X\n", AutoNegAdv));
-#endif /* VCPU */
-	
-	if (DoLoop) {
-		/* Set the PHY Loopback bit */
-		PhyCtrl |= PHY_CT_LOOP;
-
-#ifdef XXX
-		/* Program PHY register 16 as 16'h0400 to force link good */
-		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_FL_GOOD);
-#endif /* XXX */
-
-#ifndef VCPU
-		if (pPrt->PLinkSpeed != SK_LSPEED_AUTO) {
-			/* Write Ext. PHY Specific Control */
-			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL,
-				(SK_U16)((pPrt->PLinkSpeed + 2) << 4));
-		}
-#endif /* VCPU */
-	}
-#ifdef TEST_ONLY
-	else if (pPrt->PLinkSpeed == SK_LSPEED_10MBPS) {
-			/* Write PHY Specific Control */
-			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL,
-				PHY_M_PC_EN_DET_MSK);
-	}
-#endif
-
-	/* Write to the PHY Control register */
-	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Set PHY Ctrl Reg.=0x%04X\n", PhyCtrl));
-
-#ifdef VCPU
-	VCpuWait(2000);
-#else
-
-	LedCtrl = PHY_M_LED_PULS_DUR(PULS_170MS) | PHY_M_LED_BLINK_RT(BLINK_84MS);
-
-	if ((pAC->GIni.GILedBlinkCtrl & SK_ACT_LED_BLINK) != 0) {
-		LedCtrl |= PHY_M_LEDC_RX_CTRL | PHY_M_LEDC_TX_CTRL;
-	}
-
-	if ((pAC->GIni.GILedBlinkCtrl & SK_DUP_LED_NORMAL) != 0) {
-		LedCtrl |= PHY_M_LEDC_DP_CTRL;
-	}
-	
-	SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_CTRL, LedCtrl);
-
-	if ((pAC->GIni.GILedBlinkCtrl & SK_LED_LINK100_ON) != 0) {
-		/* only in forced 100 Mbps mode */
-		if (!AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_100MBPS) {
-
-			SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_OVER,
-				PHY_M_LED_MO_100(MO_LED_ON));
-		}
-	}
-
-#ifdef SK_DIAG
-	c_print("Set PHY Ctrl=0x%04X\n", PhyCtrl);
-	c_print("Set 1000 B-T=0x%04X\n", C1000BaseT);
-	c_print("Set Auto-Neg=0x%04X\n", AutoNegAdv);
-	c_print("Set Ext Ctrl=0x%04X\n", ExtPhyCtrl);
-#endif /* SK_DIAG */
-
-#if defined(SK_DIAG) || defined(DEBUG)
-	/* Read PHY Control */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("PHY Ctrl Reg.=0x%04X\n", PhyCtrl));
-	
-	/* Read 1000Base-T Control Register */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("1000B-T Ctrl =0x%04X\n", C1000BaseT));
-	
-	/* Read AutoNeg Advertisement Register */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Auto-Neg.Adv.=0x%04X\n", AutoNegAdv));
-	
-	/* Read Ext. PHY Specific Control */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl));
-	
-	/* Read PHY Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("PHY Stat Reg.=0x%04X\n", PhyStat));
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("PHY Stat Reg.=0x%04X\n", PhyStat1));
-	
-	/* Read PHY Specific Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("PHY Spec Stat=0x%04X\n", PhySpecStat));
-#endif /* SK_DIAG || DEBUG */
-
-#ifdef SK_DIAG
-	c_print("PHY Ctrl Reg=0x%04X\n", PhyCtrl);
-	c_print("PHY 1000 Reg=0x%04X\n", C1000BaseT);
-	c_print("PHY AnAd Reg=0x%04X\n", AutoNegAdv);
-	c_print("Ext Ctrl Reg=0x%04X\n", ExtPhyCtrl);
-	c_print("PHY Stat Reg=0x%04X\n", PhyStat);
-	c_print("PHY Stat Reg=0x%04X\n", PhyStat1);
-	c_print("PHY Spec Reg=0x%04X\n", PhySpecStat);
-#endif /* SK_DIAG */
-
-#endif /* VCPU */
-
-}	/* SkGmInitPhyMarv */
-#endif /* YUKON */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- *	SkXmInitPhyLone() - Initialize the Level One Phy registers
- *
- * Description:	initializes all the Level One Phy registers
- *
- * Note:
- *
- * Returns:
- *	nothing
- */
-static void SkXmInitPhyLone(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		Ctrl1;
-	SK_U16		Ctrl2;
-	SK_U16		Ctrl3;
-
-	Ctrl1 = PHY_CT_SP1000;
-	Ctrl2 = 0;
-	Ctrl3 = PHY_SEL_TYPE;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* manually Master/Slave ? */
-	if (pPrt->PMSMode != SK_MS_MODE_AUTO) {
-		Ctrl2 |= PHY_L_1000C_MSE;
-		
-		if (pPrt->PMSMode == SK_MS_MODE_MASTER) {
-			Ctrl2 |= PHY_L_1000C_MSC;
-		}
-	}
-	/* Auto-negotiation ? */
-	if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) {
-		/*
-		 * level one spec say: "1000 Mbps: manual mode not allowed"
-		 * but lets see what happens...
-		 */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("InitPhyLone: no auto-negotiation Port %d\n", Port));
-		/* Set DuplexMode in Config register */
-		if (pPrt->PLinkMode == SK_LMODE_FULL) {
-			Ctrl1 |= PHY_CT_DUP_MD;
-		}
-
-		/* Determine Master/Slave manually if not already done */
-		if (pPrt->PMSMode == SK_MS_MODE_AUTO) {
-			Ctrl2 |= PHY_L_1000C_MSE;	/* set it to Slave */
-		}
-
-		/*
-		 * Do NOT enable Auto-negotiation here. This would hold
-		 * the link down because no IDLES are transmitted
-		 */
-	}
-	else {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("InitPhyLone: with auto-negotiation Port %d\n", Port));
-		/* Set Auto-negotiation advertisement */
-
-		/* Set Full/half duplex capabilities */
-		switch (pPrt->PLinkMode) {
-		case SK_LMODE_AUTOHALF:
-			Ctrl2 |= PHY_L_1000C_AHD;
-			break;
-		case SK_LMODE_AUTOFULL:
-			Ctrl2 |= PHY_L_1000C_AFD;
-			break;
-		case SK_LMODE_AUTOBOTH:
-			Ctrl2 |= PHY_L_1000C_AFD | PHY_L_1000C_AHD;
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015,
-				SKERR_HWI_E015MSG);
-		}
-
-		/* Set Flow-control capabilities */
-		switch (pPrt->PFlowCtrlMode) {
-		case SK_FLOW_MODE_NONE:
-			Ctrl3 |= PHY_L_P_NO_PAUSE;
-			break;
-		case SK_FLOW_MODE_LOC_SEND:
-			Ctrl3 |= PHY_L_P_ASYM_MD;
-			break;
-		case SK_FLOW_MODE_SYMMETRIC:
-			Ctrl3 |= PHY_L_P_SYM_MD;
-			break;
-		case SK_FLOW_MODE_SYM_OR_REM:
-			Ctrl3 |= PHY_L_P_BOTH_MD;
-			break;
-		default:
-			SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
-				SKERR_HWI_E016MSG);
-		}
-
-		/* Restart Auto-negotiation */
-		Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG;
-	}
-	
-	/* Write 1000Base-T Control Register */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("1000B-T Ctrl Reg=0x%04X\n", Ctrl2));
-	
-	/* Write AutoNeg Advertisement Register */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3));
-
-	if (DoLoop) {
-		/* Set the Phy Loopback bit, too */
-		Ctrl1 |= PHY_CT_LOOP;
-	}
-
-	/* Write to the Phy control register */
-	SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_CTRL, Ctrl1);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("PHY Control Reg=0x%04X\n", Ctrl1));
-}	/* SkXmInitPhyLone */
-
-
-/******************************************************************************
- *
- *	SkXmInitPhyNat() - Initialize the National Phy registers
- *
- * Description:	initializes all the National Phy registers
- *
- * Note:
- *
- * Returns:
- *	nothing
- */
-static void SkXmInitPhyNat(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
-{
-/* todo: National */
-}	/* SkXmInitPhyNat */
-#endif /* OTHER_PHY */
-
-
-/******************************************************************************
- *
- *	SkMacInitPhy() - Initialize the PHY registers
- *
- * Description:	calls the Init PHY routines dep. on board type
- *
- * Note:
- *
- * Returns:
- *	nothing
- */
-void SkMacInitPhy(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL	DoLoop)		/* Should a Phy LoopBack be set-up? */
-{
-	SK_GEPORT	*pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		switch (pPrt->PhyType) {
-		case SK_PHY_XMAC:
-			SkXmInitPhyXmac(pAC, IoC, Port, DoLoop);
-			break;
-		case SK_PHY_BCOM:
-			SkXmInitPhyBcom(pAC, IoC, Port, DoLoop);
-			break;
-#ifdef OTHER_PHY
-		case SK_PHY_LONE:
-			SkXmInitPhyLone(pAC, IoC, Port, DoLoop);
-			break;
-		case SK_PHY_NAT:
-			SkXmInitPhyNat(pAC, IoC, Port, DoLoop);
-			break;
-#endif /* OTHER_PHY */
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		SkGmInitPhyMarv(pAC, IoC, Port, DoLoop);
-	}
-#endif /* YUKON */
-
-}	/* SkMacInitPhy */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmAutoNegDoneXmac() - Auto-negotiation handling
- *
- * Description:
- *	This function handles the auto-negotiation if the Done bit is set.
- *
- * Returns:
- *	SK_AND_OK	o.k.
- *	SK_AND_DUP_CAP 	Duplex capability error happened
- *	SK_AND_OTHER 	Other error happened
- */
-static int SkXmAutoNegDoneXmac(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		ResAb;		/* Resolved Ability */
-	SK_U16		LPAb;		/* Link Partner Ability */
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNegDoneXmac, Port %d\n", Port));
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Get PHY parameters */
-	SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LPAb);
-	SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb);
-
-	if ((LPAb & PHY_X_AN_RFB) != 0) {
-		/* At least one of the remote fault bit is set */
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegFail: Remote fault bit set Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		return(SK_AND_OTHER);
-	}
-
-	/* Check Duplex mismatch */
-	if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_FD) {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
-	}
-	else if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_HD) {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
-	}
-	else {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		return(SK_AND_DUP_CAP);
-	}
-
-	/* Check PAUSE mismatch */
-	/* We are NOT using chapter 4.23 of the Xaqti manual */
-	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
-	if ((pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC ||
-	     pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) &&
-	    (LPAb & PHY_X_P_SYM_MD) != 0) {
-		/* Symmetric PAUSE */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
-	}
-	else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM &&
-		   (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) {
-		/* Enable PAUSE receive, disable PAUSE transmit */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
-	}
-	else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND &&
-		   (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) {
-		/* Disable PAUSE receive, enable PAUSE transmit */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
-	}
-	else {
-		/* PAUSE mismatch -> no PAUSE */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
-	}
-	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
-
-	return(SK_AND_OK);
-}	/* SkXmAutoNegDoneXmac */
-
-
-/******************************************************************************
- *
- *	SkXmAutoNegDoneBcom() - Auto-negotiation handling
- *
- * Description:
- *	This function handles the auto-negotiation if the Done bit is set.
- *
- * Returns:
- *	SK_AND_OK	o.k.
- *	SK_AND_DUP_CAP 	Duplex capability error happened
- *	SK_AND_OTHER 	Other error happened
- */
-static int SkXmAutoNegDoneBcom(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		LPAb;		/* Link Partner Ability */
-	SK_U16		AuxStat;	/* Auxiliary Status */
-
-#ifdef TEST_ONLY
-01-Sep-2000 RA;:;:
-	SK_U16		ResAb;		/* Resolved Ability */
-#endif	/* 0 */
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNegDoneBcom, Port %d\n", Port));
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Get PHY parameters */
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LPAb);
-#ifdef TEST_ONLY
-01-Sep-2000 RA;:;:
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb);
-#endif	/* 0 */
-	
-	SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat);
-
-	if ((LPAb & PHY_B_AN_RF) != 0) {
-		/* Remote fault bit is set: Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegFail: Remote fault bit set Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		return(SK_AND_OTHER);
-	}
-
-	/* Check Duplex mismatch */
-	if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000FD) {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
-	}
-	else if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000HD) {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
-	}
-	else {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegFail: Duplex mode mismatch Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		return(SK_AND_DUP_CAP);
-	}
-	
-#ifdef TEST_ONLY
-01-Sep-2000 RA;:;:
-	/* Check Master/Slave resolution */
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-		return(SK_AND_OTHER);
-	}
-	
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE;
-#endif	/* 0 */
-
-	/* Check PAUSE mismatch ??? */
-	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
-	if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PAUSE_MSK) {
-		/* Symmetric PAUSE */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
-	}
-	else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRR) {
-		/* Enable PAUSE receive, disable PAUSE transmit */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
-	}
-	else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRT) {
-		/* Disable PAUSE receive, enable PAUSE transmit */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
-	}
-	else {
-		/* PAUSE mismatch -> no PAUSE */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
-	}
-	pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
-
-	return(SK_AND_OK);
-}	/* SkXmAutoNegDoneBcom */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkGmAutoNegDoneMarv() - Auto-negotiation handling
- *
- * Description:
- *	This function handles the auto-negotiation if the Done bit is set.
- *
- * Returns:
- *	SK_AND_OK	o.k.
- *	SK_AND_DUP_CAP 	Duplex capability error happened
- *	SK_AND_OTHER 	Other error happened
- */
-static int SkGmAutoNegDoneMarv(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		LPAb;		/* Link Partner Ability */
-	SK_U16		ResAb;		/* Resolved Ability */
-	SK_U16		AuxStat;	/* Auxiliary Status */
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNegDoneMarv, Port %d\n", Port));
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Get PHY parameters */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb);
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("Link P.Abil.=0x%04X\n", LPAb));
-	
-	if ((LPAb & PHY_M_AN_RF) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegFail: Remote fault bit set Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		return(SK_AND_OTHER);
-	}
-
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb);
-	
-	/* Check Master/Slave resolution */
-	if ((ResAb & PHY_B_1000S_MSF) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-		return(SK_AND_OTHER);
-	}
-	
-	pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ?
-		(SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE;
-	
-	/* Read PHY Specific Status */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat);
-	
-	/* Check Speed & Duplex resolved */
-	if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegFail: Speed & Duplex not resolved, Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
-		return(SK_AND_DUP_CAP);
-	}
-	
-	if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
-	}
-	else {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
-	}
-	
-	/* Check PAUSE mismatch ??? */
-	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
-	if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) {
-		/* Symmetric PAUSE */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
-	}
-	else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_RX_P_EN) {
-		/* Enable PAUSE receive, disable PAUSE transmit */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
-	}
-	else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_TX_P_EN) {
-		/* Disable PAUSE receive, enable PAUSE transmit */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
-	}
-	else {
-		/* PAUSE mismatch -> no PAUSE */
-		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
-	}
-	
-	/* set used link speed */
-	switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) {
-	case (unsigned)PHY_M_PS_SPEED_1000:
-		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS;
-		break;
-	case PHY_M_PS_SPEED_100:
-		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS;
-		break;
-	default:
-		pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS;
-	}
-
-	return(SK_AND_OK);
-}	/* SkGmAutoNegDoneMarv */
-#endif /* YUKON */
-
-
-#ifdef OTHER_PHY
-/******************************************************************************
- *
- *	SkXmAutoNegDoneLone() - Auto-negotiation handling
- *
- * Description:
- *	This function handles the auto-negotiation if the Done bit is set.
- *
- * Returns:
- *	SK_AND_OK	o.k.
- *	SK_AND_DUP_CAP 	Duplex capability error happened
- *	SK_AND_OTHER 	Other error happened
- */
-static int SkXmAutoNegDoneLone(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		ResAb;		/* Resolved Ability */
-	SK_U16		LPAb;		/* Link Partner Ability */
-	SK_U16		QuickStat;	/* Auxiliary Status */
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNegDoneLone, Port %d\n", Port));
-	pPrt = &pAC->GIni.GP[Port];
-
-	/* Get PHY parameters */
-	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LPAb);
-	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ResAb);
-	SkXmPhyRead(pAC, IoC, Port, PHY_LONE_Q_STAT, &QuickStat);
-
-	if ((LPAb & PHY_L_AN_RF) != 0) {
-		/* Remote fault bit is set */
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegFail: Remote fault bit set Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		return(SK_AND_OTHER);
-	}
-
-	/* Check Duplex mismatch */
-	if ((QuickStat & PHY_L_QS_DUP_MOD) != 0) {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL;
-	}
-	else {
-		pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF;
-	}
-	
-	/* Check Master/Slave resolution */
-	if ((ResAb & PHY_L_1000S_MSF) != 0) {
-		/* Error */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("Master/Slave Fault Port %d\n", Port));
-		pPrt->PAutoNegFail = SK_TRUE;
-		pPrt->PMSStatus = SK_MS_STAT_FAULT;
-		return(SK_AND_OTHER);
-	}
-	else if (ResAb & PHY_L_1000S_MSR) {
-		pPrt->PMSStatus = SK_MS_STAT_MASTER;
-	}
-	else {
-		pPrt->PMSStatus = SK_MS_STAT_SLAVE;
-	}
-
-	/* Check PAUSE mismatch */
-	/* We are using IEEE 802.3z/D5.0 Table 37-4 */
-	/* we must manually resolve the abilities here */
-	pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
-	
-	switch (pPrt->PFlowCtrlMode) {
-	case SK_FLOW_MODE_NONE:
-		/* default */
-		break;
-	case SK_FLOW_MODE_LOC_SEND:
-		if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
-			(PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) {
-			/* Disable PAUSE receive, enable PAUSE transmit */
-			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND;
-		}
-		break;
-	case SK_FLOW_MODE_SYMMETRIC:
-		if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
-			/* Symmetric PAUSE */
-			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
-		}
-		break;
-	case SK_FLOW_MODE_SYM_OR_REM:
-		if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) ==
-			PHY_L_QS_AS_PAUSE) {
-			/* Enable PAUSE receive, disable PAUSE transmit */
-			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND;
-		}
-		else if ((QuickStat & PHY_L_QS_PAUSE) != 0) {
-			/* Symmetric PAUSE */
-			pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC;
-		}
-		break;
-	default:
-		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016,
-			SKERR_HWI_E016MSG);
-	}
-	
-	return(SK_AND_OK);
-}	/* SkXmAutoNegDoneLone */
-
-
-/******************************************************************************
- *
- *	SkXmAutoNegDoneNat() - Auto-negotiation handling
- *
- * Description:
- *	This function handles the auto-negotiation if the Done bit is set.
- *
- * Returns:
- *	SK_AND_OK	o.k.
- *	SK_AND_DUP_CAP 	Duplex capability error happened
- *	SK_AND_OTHER 	Other error happened
- */
-static int SkXmAutoNegDoneNat(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-/* todo: National */
-	return(SK_AND_OK);
-}	/* SkXmAutoNegDoneNat */
-#endif /* OTHER_PHY */
-
-
-/******************************************************************************
- *
- *	SkMacAutoNegDone() - Auto-negotiation handling
- *
- * Description:	calls the auto-negotiation done routines dep. on board type
- *
- * Returns:
- *	SK_AND_OK	o.k.
- *	SK_AND_DUP_CAP 	Duplex capability error happened
- *	SK_AND_OTHER 	Other error happened
- */
-int	SkMacAutoNegDone(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	int	Rtv;
-
-	Rtv = SK_AND_OK;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		switch (pPrt->PhyType) {
-		
-		case SK_PHY_XMAC:
-			Rtv = SkXmAutoNegDoneXmac(pAC, IoC, Port);
-			break;
-		case SK_PHY_BCOM:
-			Rtv = SkXmAutoNegDoneBcom(pAC, IoC, Port);
-			break;
-#ifdef OTHER_PHY
-		case SK_PHY_LONE:
-			Rtv = SkXmAutoNegDoneLone(pAC, IoC, Port);
-			break;
-		case SK_PHY_NAT:
-			Rtv = SkXmAutoNegDoneNat(pAC, IoC, Port);
-			break;
-#endif /* OTHER_PHY */
-		default:
-			return(SK_AND_OTHER);
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		Rtv = SkGmAutoNegDoneMarv(pAC, IoC, Port);
-	}
-#endif /* YUKON */
-	
-	if (Rtv != SK_AND_OK) {
-		return(Rtv);
-	}
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("AutoNeg done Port %d\n", Port));
-	
-	/* We checked everything and may now enable the link */
-	pPrt->PAutoNegFail = SK_FALSE;
-
-	SkMacRxTxEnable(pAC, IoC, Port);
-	
-	return(SK_AND_OK);
-}	/* SkMacAutoNegDone */
-
-
-/******************************************************************************
- *
- *	SkMacRxTxEnable() - Enable Rx/Tx activity if port is up
- *
- * Description:	enables Rx/Tx dep. on board type
- *
- * Returns:
- *	0	o.k.
- *	!= 0	Error happened
- */
-int SkMacRxTxEnable(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		Reg;		/* 16-bit register value */
-	SK_U16		IntMask;	/* MAC interrupt mask */
-#ifdef GENESIS
-	SK_U16		SWord;
-#endif
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (!pPrt->PHWLinkUp) {
-		/* The Hardware link is NOT up */
-		return(0);
-	}
-
-	if ((pPrt->PLinkMode == SK_LMODE_AUTOHALF ||
-	     pPrt->PLinkMode == SK_LMODE_AUTOFULL ||
-	     pPrt->PLinkMode == SK_LMODE_AUTOBOTH) &&
-	     pPrt->PAutoNegFail) {
-		/* Auto-negotiation is not done or failed */
-		return(0);
-	}
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		/* set Duplex Mode and Pause Mode */
-		SkXmInitDupMd(pAC, IoC, Port);
-		
-		SkXmInitPauseMd(pAC, IoC, Port);
-	
-		/*
-		 * Initialize the Interrupt Mask Register. Default IRQs are...
-		 *	- Link Asynchronous Event
-		 *	- Link Partner requests config
-		 *	- Auto Negotiation Done
-		 *	- Rx Counter Event Overflow
-		 *	- Tx Counter Event Overflow
-		 *	- Transmit FIFO Underrun
-		 */
-		IntMask = XM_DEF_MSK;
-
-#ifdef DEBUG
-		/* add IRQ for Receive FIFO Overflow */
-		IntMask &= ~XM_IS_RXF_OV;
-#endif /* DEBUG */
-		
-		if (pPrt->PhyType != SK_PHY_XMAC) {
-			/* disable GP0 interrupt bit */
-			IntMask |= XM_IS_INP_ASS;
-		}
-		XM_OUT16(IoC, Port, XM_IMSK, IntMask);
-	
-		/* get MMU Command Reg. */
-		XM_IN16(IoC, Port, XM_MMU_CMD, &Reg);
-		
-		if (pPrt->PhyType != SK_PHY_XMAC &&
-			(pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
-			 pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) {
-			/* set to Full Duplex */
-			Reg |= XM_MMU_GMII_FD;
-		}
-		
-		switch (pPrt->PhyType) {
-		case SK_PHY_BCOM:
-			/*
-			 * Workaround BCOM Errata (#10523) for all BCom Phys
-			 * Enable Power Management after link up
-			 */
-			SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord);
-			SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
-				(SK_U16)(SWord & ~PHY_B_AC_DIS_PM));
-            SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK,
-				(SK_U16)PHY_B_DEF_MSK);
-			break;
-#ifdef OTHER_PHY
-		case SK_PHY_LONE:
-			SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, PHY_L_DEF_MSK);
-			break;
-		case SK_PHY_NAT:
-			/* todo National:
-			SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, PHY_N_DEF_MSK); */
-			/* no interrupts possible from National ??? */
-			break;
-#endif /* OTHER_PHY */
-		}
-		
-		/* enable Rx/Tx */
-		XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/*
-		 * Initialize the Interrupt Mask Register. Default IRQs are...
-		 *	- Rx Counter Event Overflow
-		 *	- Tx Counter Event Overflow
-		 *	- Transmit FIFO Underrun
-		 */
-		IntMask = GMAC_DEF_MSK;
-
-#ifdef DEBUG
-		/* add IRQ for Receive FIFO Overrun */
-		IntMask |= GM_IS_RX_FF_OR;
-#endif /* DEBUG */
-		
-		SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask);
-		
-		/* get General Purpose Control */
-		GM_IN16(IoC, Port, GM_GP_CTRL, &Reg);
-		
-		if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL ||
-			pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) {
-			/* set to Full Duplex */
-			Reg |= GM_GPCR_DUP_FULL;
-		}
-		
-		/* enable Rx/Tx */
-        GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Reg | GM_GPCR_RX_ENA |
-			GM_GPCR_TX_ENA));
-
-#ifndef VCPU
-		/* Enable all PHY interrupts */
-        SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK,
-			(SK_U16)PHY_M_DEF_MSK);
-#endif /* VCPU */
-	}
-#endif /* YUKON */
-					
-	return(0);
-
-}	/* SkMacRxTxEnable */
-
-
-/******************************************************************************
- *
- *	SkMacRxTxDisable() - Disable Receiver and Transmitter
- *
- * Description:	disables Rx/Tx dep. on board type
- *
- * Returns: N/A
- */
-void SkMacRxTxDisable(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_U16	Word;
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
-		
-		XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
-	
-		/* dummy read to ensure writing */
-		XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		
-		GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
-
-        GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Word & ~(GM_GPCR_RX_ENA |
-			GM_GPCR_TX_ENA)));
-
-		/* dummy read to ensure writing */
-		GM_IN16(IoC, Port, GM_GP_CTRL, &Word);
-	}
-#endif /* YUKON */
-
-}	/* SkMacRxTxDisable */
-
-
-/******************************************************************************
- *
- *	SkMacIrqDisable() - Disable IRQ from MAC
- *
- * Description:	sets the IRQ-mask to disable IRQ dep. on board type
- *
- * Returns: N/A
- */
-void SkMacIrqDisable(
-SK_AC	*pAC,		/* Adapter Context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-#ifdef GENESIS
-	SK_U16		Word;
-#endif
-
-	pPrt = &pAC->GIni.GP[Port];
-
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		
-		/* disable all XMAC IRQs */
-		XM_OUT16(IoC, Port, XM_IMSK, 0xffff);	
-		
-		/* Disable all PHY interrupts */
-		switch (pPrt->PhyType) {
-			case SK_PHY_BCOM:
-				/* Make sure that PHY is initialized */
-				if (pPrt->PState != SK_PRT_RESET) {
-					/* NOT allowed if BCOM is in RESET state */
-					/* Workaround BCOM Errata (#10523) all BCom */
-					/* Disable Power Management if link is down */
-					SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Word);
-					SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL,
-						(SK_U16)(Word | PHY_B_AC_DIS_PM));
-					SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff);
-				}
-				break;
-#ifdef OTHER_PHY
-			case SK_PHY_LONE:
-				SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0);
-				break;
-			case SK_PHY_NAT:
-				/* todo: National
-				SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */
-				break;
-#endif /* OTHER_PHY */
-		}
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* disable all GMAC IRQs */
-		SK_OUT8(IoC, GMAC_IRQ_MSK, 0);
-		
-#ifndef VCPU
-		/* Disable all PHY interrupts */
-		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0);
-#endif /* VCPU */
-	}
-#endif /* YUKON */
-
-}	/* SkMacIrqDisable */
-
-
-#ifdef SK_DIAG
-/******************************************************************************
- *
- *	SkXmSendCont() - Enable / Disable Send Continuous Mode
- *
- * Description:	enable / disable Send Continuous Mode on XMAC
- *
- * Returns:
- *	nothing
- */
-void SkXmSendCont(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port,	/* Port Index (MAC_1 + n) */
-SK_BOOL	Enable)	/* Enable / Disable */
-{
-	SK_U32	MdReg;
-
-	XM_IN32(IoC, Port, XM_MODE, &MdReg);
-
-	if (Enable) {
-		MdReg |= XM_MD_TX_CONT;
-	}
-	else {
-		MdReg &= ~XM_MD_TX_CONT;
-	}
-	/* setup Mode Register */
-	XM_OUT32(IoC, Port, XM_MODE, MdReg);
-
-}	/* SkXmSendCont */
-
-
-/******************************************************************************
- *
- *	SkMacTimeStamp() - Enable / Disable Time Stamp
- *
- * Description:	enable / disable Time Stamp generation for Rx packets
- *
- * Returns:
- *	nothing
- */
-void SkMacTimeStamp(
-SK_AC	*pAC,	/* adapter context */
-SK_IOC	IoC,	/* IO context */
-int		Port,	/* Port Index (MAC_1 + n) */
-SK_BOOL	Enable)	/* Enable / Disable */
-{
-	SK_U32	MdReg;
-	SK_U8	TimeCtrl;
-
-	if (pAC->GIni.GIGenesis) {
-
-		XM_IN32(IoC, Port, XM_MODE, &MdReg);
-
-		if (Enable) {
-			MdReg |= XM_MD_ATS;
-		}
-		else {
-			MdReg &= ~XM_MD_ATS;
-		}
-		/* setup Mode Register */
-		XM_OUT32(IoC, Port, XM_MODE, MdReg);
-	}
-	else {
-		if (Enable) {
-			TimeCtrl = GMT_ST_START | GMT_ST_CLR_IRQ;
-		}
-		else {
-			TimeCtrl = GMT_ST_STOP | GMT_ST_CLR_IRQ;
-		}
-		/* Start/Stop Time Stamp Timer */
-		SK_OUT8(IoC, GMAC_TI_ST_CTRL, TimeCtrl);
-	}
-
-}	/* SkMacTimeStamp*/
-
-#else /* !SK_DIAG */
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmAutoNegLipaXmac() - Decides whether Link Partner could do auto-neg
- *
- *	This function analyses the Interrupt status word. If any of the
- *	Auto-negotiating interrupt bits are set, the PLipaAutoNeg variable
- *	is set true.
- */
-void SkXmAutoNegLipaXmac(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U16	IStatus)	/* Interrupt Status word to analyse */
-{
-	SK_GEPORT	*pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
-		(IStatus & (XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND)) != 0) {
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegLipa: AutoNeg detected on Port %d, IStatus=0x%04X\n",
-			Port, IStatus));
-		pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
-	}
-}	/* SkXmAutoNegLipaXmac */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- *	SkMacAutoNegLipaPhy() - Decides whether Link Partner could do auto-neg
- *
- *	This function analyses the PHY status word.
- *  If any of the Auto-negotiating bits are set, the PLipaAutoNeg variable
- *	is set true.
- */
-void SkMacAutoNegLipaPhy(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_U16	PhyStat)	/* PHY Status word to analyse */
-{
-	SK_GEPORT	*pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO &&
-		(PhyStat & PHY_ST_AN_OVER) != 0) {
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("AutoNegLipa: AutoNeg detected on Port %d, PhyStat=0x%04X\n",
-			Port, PhyStat));
-		pPrt->PLipaAutoNeg = SK_LIPA_AUTO;
-	}
-}	/* SkMacAutoNegLipaPhy */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmIrq() - Interrupt Service Routine
- *
- * Description:	services an Interrupt Request of the XMAC
- *
- * Note:
- *	With an external PHY, some interrupt bits are not meaningfull any more:
- *	- LinkAsyncEvent (bit #14)              XM_IS_LNK_AE
- *	- LinkPartnerReqConfig (bit #10)	XM_IS_LIPA_RC
- *	- Page Received (bit #9)		XM_IS_RX_PAGE
- *	- NextPageLoadedForXmt (bit #8)		XM_IS_TX_PAGE
- *	- AutoNegDone (bit #7)			XM_IS_AND
- *	Also probably not valid any more is the GP0 input bit:
- *	- GPRegisterBit0set			XM_IS_INP_ASS
- *
- * Returns:
- *	nothing
- */
-static void SkXmIrq(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_EVPARA	Para;
-	SK_U16		IStatus;	/* Interrupt status read from the XMAC */
-	SK_U16		IStatus2;
-#ifdef SK_SLIM
-    SK_U64      OverflowStatus;
-#endif	
-
-	pPrt = &pAC->GIni.GP[Port];
-	
-	XM_IN16(IoC, Port, XM_ISRC, &IStatus);
-	
-	/* LinkPartner Auto-negable? */
-	if (pPrt->PhyType == SK_PHY_XMAC) {
-		SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus);
-	}
-	else {
-		/* mask bits that are not used with ext. PHY */
-		IStatus &= ~(XM_IS_LNK_AE | XM_IS_LIPA_RC |
-			XM_IS_RX_PAGE | XM_IS_TX_PAGE |
-			XM_IS_AND | XM_IS_INP_ASS);
-	}
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("XmacIrq Port %d Isr 0x%04X\n", Port, IStatus));
-
-	if (!pPrt->PHWLinkUp) {
-		/* Spurious XMAC interrupt */
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("SkXmIrq: spurious interrupt on Port %d\n", Port));
-		return;
-	}
-
-	if ((IStatus & XM_IS_INP_ASS) != 0) {
-		/* Reread ISR Register if link is not in sync */
-		XM_IN16(IoC, Port, XM_ISRC, &IStatus2);
-
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("SkXmIrq: Link async. Double check Port %d 0x%04X 0x%04X\n",
-			 Port, IStatus, IStatus2));
-		IStatus &= ~XM_IS_INP_ASS;
-		IStatus |= IStatus2;
-	}
-
-	if ((IStatus & XM_IS_LNK_AE) != 0) {
-		/* not used, GP0 is used instead */
-	}
-
-	if ((IStatus & XM_IS_TX_ABORT) != 0) {
-		/* not used */
-	}
-
-	if ((IStatus & XM_IS_FRC_INT) != 0) {
-		/* not used, use ASIC IRQ instead if needed */
-	}
-
-	if ((IStatus & (XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE)) != 0) {
-		SkHWLinkDown(pAC, IoC, Port);
-
-		/* Signal to RLMT */
-		Para.Para32[0] = (SK_U32)Port;
-		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
-
-		/* Start workaround Errata #2 timer */
-		SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME,
-			SKGE_HWAC, SK_HWEV_WATIM, Para);
-	}
-
-	if ((IStatus & XM_IS_RX_PAGE) != 0) {
-		/* not used */
-	}
-
-	if ((IStatus & XM_IS_TX_PAGE) != 0) {
-		/* not used */
-	}
-
-	if ((IStatus & XM_IS_AND) != 0) {
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-			("SkXmIrq: AND on link that is up Port %d\n", Port));
-	}
-
-	if ((IStatus & XM_IS_TSC_OV) != 0) {
-		/* not used */
-	}
-
-	/* Combined Tx & Rx Counter Overflow SIRQ Event */
-	if ((IStatus & (XM_IS_RXC_OV | XM_IS_TXC_OV)) != 0) {
-#ifdef SK_SLIM
-		SkXmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus);
-#else
-		Para.Para32[0] = (SK_U32)Port;
-		Para.Para32[1] = (SK_U32)IStatus;
-		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
-#endif /* SK_SLIM */
-	}
-
-	if ((IStatus & XM_IS_RXF_OV) != 0) {
-		/* normal situation -> no effect */
-#ifdef DEBUG
-		pPrt->PRxOverCnt++;
-#endif /* DEBUG */
-	}
-
-	if ((IStatus & XM_IS_TXF_UR) != 0) {
-		/* may NOT happen -> error log */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
-	}
-
-	if ((IStatus & XM_IS_TX_COMP) != 0) {
-		/* not served here */
-	}
-
-	if ((IStatus & XM_IS_RX_COMP) != 0) {
-		/* not served here */
-	}
-}	/* SkXmIrq */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkGmIrq() - Interrupt Service Routine
- *
- * Description:	services an Interrupt Request of the GMAC
- *
- * Note:
- *
- * Returns:
- *	nothing
- */
-static void SkGmIrq(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U8		IStatus;	/* Interrupt status */
-#ifdef SK_SLIM
-    SK_U64      OverflowStatus;
-#else
-	SK_EVPARA	Para;
-#endif	
-
-	pPrt = &pAC->GIni.GP[Port];
-	
-	SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus);
-	
-#ifdef XXX
-	/* LinkPartner Auto-negable? */
-	SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus);
-#endif /* XXX */
-	
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ,
-		("GmacIrq Port %d Isr 0x%04X\n", Port, IStatus));
-
-	/* Combined Tx & Rx Counter Overflow SIRQ Event */
-	if (IStatus & (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV)) {
-		/* these IRQs will be cleared by reading GMACs register */
-#ifdef SK_SLIM
-        SkGmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus);
-#else
-		Para.Para32[0] = (SK_U32)Port;
-		Para.Para32[1] = (SK_U32)IStatus;
-		SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para);
-#endif		
-	}
-
-	if (IStatus & GM_IS_RX_FF_OR) {
-		/* clear GMAC Rx FIFO Overrun IRQ */
-		SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_CLI_RX_FO);
-#ifdef DEBUG
-		pPrt->PRxOverCnt++;
-#endif /* DEBUG */
-	}
-
-	if (IStatus & GM_IS_TX_FF_UR) {
-		/* clear GMAC Tx FIFO Underrun IRQ */
-		SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_CLI_TX_FU);
-		/* may NOT happen -> error log */
-		SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG);
-	}
-
-	if (IStatus & GM_IS_TX_COMPL) {
-		/* not served here */
-	}
-
-	if (IStatus & GM_IS_RX_COMPL) {
-		/* not served here */
-	}
-}	/* SkGmIrq */
-#endif /* YUKON */
-
-
-/******************************************************************************
- *
- *	SkMacIrq() - Interrupt Service Routine for MAC
- *
- * Description:	calls the Interrupt Service Routine dep. on board type
- *
- * Returns:
- *	nothing
- */
-void SkMacIrq(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-int		Port)		/* Port Index (MAC_1 + n) */
-{
-#ifdef GENESIS
-	if (pAC->GIni.GIGenesis) {
-		/* IRQ from XMAC */
-		SkXmIrq(pAC, IoC, Port);
-	}
-#endif /* GENESIS */
-	
-#ifdef YUKON
-	if (pAC->GIni.GIYukon) {
-		/* IRQ from GMAC */
-		SkGmIrq(pAC, IoC, Port);
-	}
-#endif /* YUKON */
-
-}	/* SkMacIrq */
-
-#endif /* !SK_DIAG */
-
-#ifdef GENESIS
-/******************************************************************************
- *
- *	SkXmUpdateStats() - Force the XMAC to output the current statistic
- *
- * Description:
- *	The XMAC holds its statistic internally. To obtain the current
- *	values a command must be sent so that the statistic data will
- *	be written to a predefined memory area on the adapter.
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkXmUpdateStats(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-unsigned int Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_GEPORT	*pPrt;
-	SK_U16		StatReg;
-	int			WaitIndex;
-
-	pPrt = &pAC->GIni.GP[Port];
-	WaitIndex = 0;
-
-	/* Send an update command to XMAC specified */
-	XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC);
-
-	/*
-	 * It is an auto-clearing register. If the command bits
-	 * went to zero again, the statistics are transferred.
-	 * Normally the command should be executed immediately.
-	 * But just to be sure we execute a loop.
-	 */
-	do {
-
-		XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg);
-		
-		if (++WaitIndex > 10) {
-
-			SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG);
-
-			return(1);
-		}
-	} while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0);
-	
-	return(0);
-}	/* SkXmUpdateStats */
-
-
-/******************************************************************************
- *
- *	SkXmMacStatistic() - Get XMAC counter value
- *
- * Description:
- *	Gets the 32bit counter value. Except for the octet counters
- *	the lower 32bit are counted in hardware and the upper 32bit
- *	must be counted in software by monitoring counter overflow interrupts.
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkXmMacStatistic(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* IO context */
-unsigned int Port,		/* Port Index (MAC_1 + n) */
-SK_U16	StatAddr,		/* MIB counter base address */
-SK_U32	SK_FAR *pVal)	/* ptr to return statistic value */
-{
-	if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) {
-		
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
-		
-		return(1);
-	}
-	
-	XM_IN32(IoC, Port, StatAddr, pVal);
-
-	return(0);
-}	/* SkXmMacStatistic */
-
-
-/******************************************************************************
- *
- *	SkXmResetCounter() - Clear MAC statistic counter
- *
- * Description:
- *	Force the XMAC to clear its statistic counter.
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkXmResetCounter(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-unsigned int Port)	/* Port Index (MAC_1 + n) */
-{
-	XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
-	/* Clear two times according to Errata #3 */
-	XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC);
-
-	return(0);
-}	/* SkXmResetCounter */
-
-
-/******************************************************************************
- *
- *	SkXmOverflowStatus() - Gets the status of counter overflow interrupt
- *
- * Description:
- *	Checks the source causing an counter overflow interrupt. On success the
- *	resulting counter overflow status is written to <pStatus>, whereas the
- *	upper dword stores the XMAC ReceiveCounterEvent register and the lower
- *	dword the XMAC TransmitCounterEvent register.
- *
- * Note:
- *	For XMAC the interrupt source is a self-clearing register, so the source
- *	must be checked only once. SIRQ module does another check to be sure
- *	that no interrupt get lost during process time.
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkXmOverflowStatus(
-SK_AC	*pAC,				/* adapter context */
-SK_IOC	IoC,				/* IO context */
-unsigned int Port,			/* Port Index (MAC_1 + n) */
-SK_U16	IStatus,			/* Interupt Status from MAC */
-SK_U64	SK_FAR *pStatus)	/* ptr for return overflow status value */
-{
-	SK_U64	Status;	/* Overflow status */
-	SK_U32	RegVal;
-
-	Status = 0;
-
-	if ((IStatus & XM_IS_RXC_OV) != 0) {
-
-		XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal);
-		Status |= (SK_U64)RegVal << 32;
-	}
-	
-	if ((IStatus & XM_IS_TXC_OV) != 0) {
-
-		XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal);
-		Status |= (SK_U64)RegVal;
-	}
-
-	*pStatus = Status;
-
-	return(0);
-}	/* SkXmOverflowStatus */
-#endif /* GENESIS */
-
-
-#ifdef YUKON
-/******************************************************************************
- *
- *	SkGmUpdateStats() - Force the GMAC to output the current statistic
- *
- * Description:
- *	Empty function for GMAC. Statistic data is accessible in direct way.
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkGmUpdateStats(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-unsigned int Port)	/* Port Index (MAC_1 + n) */
-{
-	return(0);
-}
-
-
-/******************************************************************************
- *
- *	SkGmMacStatistic() - Get GMAC counter value
- *
- * Description:
- *	Gets the 32bit counter value. Except for the octet counters
- *	the lower 32bit are counted in hardware and the upper 32bit
- *	must be counted in software by monitoring counter overflow interrupts.
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkGmMacStatistic(
-SK_AC	*pAC,			/* adapter context */
-SK_IOC	IoC,			/* IO context */
-unsigned int Port,		/* Port Index (MAC_1 + n) */
-SK_U16	StatAddr,		/* MIB counter base address */
-SK_U32	SK_FAR *pVal)	/* ptr to return statistic value */
-{
-
-	if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) {
-		
-		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG);
-		
-		SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-			("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr));
-		return(1);
-	}
-		
-	GM_IN32(IoC, Port, StatAddr, pVal);
-
-	return(0);
-}	/* SkGmMacStatistic */
-
-
-/******************************************************************************
- *
- *	SkGmResetCounter() - Clear MAC statistic counter
- *
- * Description:
- *	Force GMAC to clear its statistic counter.
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkGmResetCounter(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,		/* IO context */
-unsigned int Port)	/* Port Index (MAC_1 + n) */
-{
-	SK_U16	Reg;	/* Phy Address Register */
-	SK_U16	Word;
-	int		i;
-
-	GM_IN16(IoC, Port, GM_PHY_ADDR, &Reg);
-
-	/* set MIB Clear Counter Mode */
-	GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR);
-	
-	/* read all MIB Counters with Clear Mode set */
-	for (i = 0; i < GM_MIB_CNT_SIZE; i++) {
-		/* the reset is performed only when the lower 16 bits are read */
-		GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word);
-	}
-	
-	/* clear MIB Clear Counter Mode */
-	GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg);
-	
-	return(0);
-}	/* SkGmResetCounter */
-
-
-/******************************************************************************
- *
- *	SkGmOverflowStatus() - Gets the status of counter overflow interrupt
- *
- * Description:
- *	Checks the source causing an counter overflow interrupt. On success the
- *	resulting counter overflow status is written to <pStatus>, whereas the
- *	the following bit coding is used:
- *	63:56 - unused
- *	55:48 - TxRx interrupt register bit7:0
- *	32:47 - Rx interrupt register
- *	31:24 - unused
- *	23:16 - TxRx interrupt register bit15:8
- *	15:0  - Tx interrupt register
- *
- * Returns:
- *	0:  success
- *	1:  something went wrong
- */
-int SkGmOverflowStatus(
-SK_AC	*pAC,				/* adapter context */
-SK_IOC	IoC,				/* IO context */
-unsigned int Port,			/* Port Index (MAC_1 + n) */
-SK_U16	IStatus,			/* Interupt Status from MAC */
-SK_U64	SK_FAR *pStatus)	/* ptr for return overflow status value */
-{
-	SK_U64	Status;		/* Overflow status */
-	SK_U16	RegVal;
-
-	Status = 0;
-
-	if ((IStatus & GM_IS_RX_CO_OV) != 0) {
-		/* this register is self-clearing after read */
-		GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal);
-		Status |= (SK_U64)RegVal << 32;
-	}
-	
-	if ((IStatus & GM_IS_TX_CO_OV) != 0) {
-		/* this register is self-clearing after read */
-		GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal);
-		Status |= (SK_U64)RegVal;
-	}
-	
-	/* this register is self-clearing after read */
-	GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal);
-	/* Rx overflow interrupt register bits (LoByte)*/
-	Status |= (SK_U64)((SK_U8)RegVal) << 48;
-	/* Tx overflow interrupt register bits (HiByte)*/
-	Status |= (SK_U64)(RegVal >> 8) << 16;
-
-	*pStatus = Status;
-
-	return(0);
-}	/* SkGmOverflowStatus */
-
-
-#ifndef SK_SLIM
-/******************************************************************************
- *
- *	SkGmCableDiagStatus() - Starts / Gets status of cable diagnostic test
- *
- * Description:
- *  starts the cable diagnostic test if 'StartTest' is true
- *  gets the results if 'StartTest' is true
- *
- * NOTE:	this test is meaningful only when link is down
- *	
- * Returns:
- *	0:  success
- *	1:	no YUKON copper
- *	2:	test in progress
- */
-int SkGmCableDiagStatus(
-SK_AC	*pAC,		/* adapter context */
-SK_IOC	IoC,   		/* IO context */
-int		Port,		/* Port Index (MAC_1 + n) */
-SK_BOOL	StartTest)	/* flag for start / get result */
-{
-	int		i;
-	SK_U16	RegVal;
-	SK_GEPORT	*pPrt;
-
-	pPrt = &pAC->GIni.GP[Port];
-
-	if (pPrt->PhyType != SK_PHY_MARV_COPPER) {
-		
-		return(1);
-	}
-
-	if (StartTest) {
-		/* only start the cable test */
-		if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) {
-			/* apply TDR workaround from Marvell */
-			SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e);
-			
-			SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00);
-			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800);
-			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400);
-			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc000);
-			SkGmPhyWrite(pAC, IoC, Port, 30, 0xc100);
-		}
-
-		/* set address to 0 for MDI[0] */
-		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0);
-
-		/* Read Cable Diagnostic Reg */
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
-
-		/* start Cable Diagnostic Test */
-		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG,
-			(SK_U16)(RegVal | PHY_M_CABD_ENA_TEST));
-	
-		return(0);
-	}
-	
-	/* Read Cable Diagnostic Reg */
-	SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
-
-	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
-		("PHY Cable Diag.=0x%04X\n", RegVal));
-
-	if ((RegVal & PHY_M_CABD_ENA_TEST) != 0) {
-		/* test is running */
-		return(2);
-	}
-
-	/* get the test results */
-	for (i = 0; i < 4; i++)  {
-		/* set address to i for MDI[i] */
-		SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, (SK_U16)i);
-
-		/* get Cable Diagnostic values */
-		SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal);
-
-		pPrt->PMdiPairLen[i] = (SK_U8)(RegVal & PHY_M_CABD_DIST_MSK);
-
-		pPrt->PMdiPairSts[i] = (SK_U8)((RegVal & PHY_M_CABD_STAT_MSK) >> 13);
-	}
-
-	return(0);
-}	/* SkGmCableDiagStatus */
-#endif /* !SK_SLIM */
-#endif /* YUKON */
-
-/* End of file */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index fe01b961b597..a2f32151559e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -39,6 +39,7 @@
 #include <linux/workqueue.h>
 #include <linux/if_vlan.h>
 #include <linux/prefetch.h>
+#include <linux/debugfs.h>
 #include <linux/mii.h>
 
 #include <asm/irq.h>
@@ -50,7 +51,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.14"
+#define DRV_VERSION		"1.16"
 #define PFX			DRV_NAME " "
 
 /*
@@ -64,7 +65,6 @@
 #define RX_MAX_PENDING		(RX_LE_SIZE/6 - 2)
 #define RX_DEF_PENDING		RX_MAX_PENDING
 #define RX_SKB_ALIGN		8
-#define RX_BUF_WRITE		16
 
 #define TX_RING_SIZE		512
 #define TX_DEF_PENDING		(TX_RING_SIZE - 1)
@@ -77,6 +77,9 @@
 #define NAPI_WEIGHT		64
 #define PHY_RETRIES		1000
 
+#define SKY2_EEPROM_MAGIC	0x9955aabb
+
+
 #define RING_NEXT(x,s)	(((x)+1) & ((s)-1))
 
 static const u32 default_msg =
@@ -96,7 +99,7 @@ static int disable_msi = 0;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
-static int idle_timeout = 0;
+static int idle_timeout = 100;
 module_param(idle_timeout, int, 0);
 MODULE_PARM_DESC(idle_timeout, "Watchdog timer for lost interrupts (ms)");
 
@@ -130,7 +133,7 @@ static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
-//	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
 	{ 0 }
 };
 
@@ -217,13 +220,24 @@ static void sky2_power_on(struct sky2_hw *hw)
 		sky2_write8(hw, B2_Y2_CLK_GATE, 0);
 
 	if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
-		u32 reg1;
+		u32 reg;
 
-		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
-		reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
-		reg1 &= P_ASPM_CONTROL_MSK;
-		sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
-		sky2_pci_write32(hw, PCI_DEV_REG5, 0);
+		reg = sky2_pci_read32(hw, PCI_DEV_REG4);
+		/* set all bits to 0 except bits 15..12 and 8 */
+		reg &= P_ASPM_CONTROL_MSK;
+		sky2_pci_write32(hw, PCI_DEV_REG4, reg);
+
+		reg = sky2_pci_read32(hw, PCI_DEV_REG5);
+		/* set all bits to 0 except bits 28 & 27 */
+		reg &= P_CTL_TIM_VMAIN_AV_MSK;
+		sky2_pci_write32(hw, PCI_DEV_REG5, reg);
+
+		sky2_pci_write32(hw, PCI_CFG_REG_1, 0);
+
+		/* Enable workaround for dev 4.107 on Yukon-Ultra & Extreme */
+		reg = sky2_read32(hw, B2_GP_IO);
+		reg |= GLB_GPIO_STAT_RACE_DIS;
+		sky2_write32(hw, B2_GP_IO, reg);
 	}
 }
 
@@ -650,6 +664,30 @@ static void sky2_wol_init(struct sky2_port *sky2)
 
 }
 
+static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port)
+{
+	if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev != CHIP_REV_YU_EX_A0) {
+		sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+			     TX_STFW_ENA |
+			     (hw->dev[port]->mtu > ETH_DATA_LEN) ? TX_JUMBO_ENA : TX_JUMBO_DIS);
+	} else {
+		if (hw->dev[port]->mtu > ETH_DATA_LEN) {
+			/* set Tx GMAC FIFO Almost Empty Threshold */
+			sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
+				     (ECU_JUMBO_WM << 16) | ECU_AE_THR);
+
+			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+				     TX_JUMBO_ENA | TX_STFW_DIS);
+
+			/* Can't do offload because of lack of store/forward */
+			hw->dev[port]->features &= ~(NETIF_F_TSO | NETIF_F_SG
+						     | NETIF_F_ALL_CSUM);
+		} else
+			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
+				     TX_JUMBO_DIS | TX_STFW_ENA);
+	}
+}
+
 static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 {
 	struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
@@ -730,8 +768,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 
 	/* Configure Rx MAC FIFO */
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
-	sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
-		     GMF_OPER_ON | GMF_RX_F_FL_ON);
+	reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
+	if (hw->chip_id == CHIP_ID_YUKON_EX)
+		reg |= GMF_RX_OVER_ON;
+
+	sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
 
 	/* Flush Rx MAC FIFO on any flow control or error */
 	sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
@@ -747,16 +788,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 		sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
 		sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
 
-		/* set Tx GMAC FIFO Almost Empty Threshold */
-		sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR),
-			     (ECU_JUMBO_WM << 16) | ECU_AE_THR);
-
-		if (hw->dev[port]->mtu > ETH_DATA_LEN)
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-				     TX_JUMBO_ENA | TX_STFW_DIS);
-		else
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-				     TX_JUMBO_DIS | TX_STFW_ENA);
+		sky2_set_tx_stfwd(hw, port);
 	}
 
 }
@@ -861,24 +893,18 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
 	return le;
 }
 
-/* Return high part of DMA address (could be 32 or 64 bit) */
-static inline u32 high32(dma_addr_t a)
-{
-	return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0;
-}
-
 /* Build description to hardware for one receive segment */
 static void sky2_rx_add(struct sky2_port *sky2,  u8 op,
 			dma_addr_t map, unsigned len)
 {
 	struct sky2_rx_le *le;
-	u32 hi = high32(map);
+	u32 hi = upper_32_bits(map);
 
 	if (sky2->rx_addr64 != hi) {
 		le = sky2_next_rx(sky2);
 		le->addr = cpu_to_le32(hi);
 		le->opcode = OP_ADDR64 | HW_OWNER;
-		sky2->rx_addr64 = high32(map + len);
+		sky2->rx_addr64 = upper_32_bits(map + len);
 	}
 
 	le = sky2_next_rx(sky2);
@@ -939,14 +965,16 @@ static void rx_set_checksum(struct sky2_port *sky2)
 {
 	struct sky2_rx_le *le;
 
-	le = sky2_next_rx(sky2);
-	le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
-	le->ctrl = 0;
-	le->opcode = OP_TCPSTART | HW_OWNER;
+	if (sky2->hw->chip_id != CHIP_ID_YUKON_EX) {
+		le = sky2_next_rx(sky2);
+		le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN);
+		le->ctrl = 0;
+		le->opcode = OP_TCPSTART | HW_OWNER;
 
-	sky2_write32(sky2->hw,
-		     Q_ADDR(rxqaddr[sky2->port], Q_CSR),
-		     sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+		sky2_write32(sky2->hw,
+			     Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+			     sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
+	}
 
 }
 
@@ -1106,6 +1134,11 @@ nomem:
 	return NULL;
 }
 
+static inline void sky2_rx_update(struct sky2_port *sky2, unsigned rxq)
+{
+	sky2_put_idx(sky2->hw, rxq, sky2->rx_put);
+}
+
 /*
  * Allocate and setup receiver buffer pool.
  * Normal case this ends up creating one list element for skb
@@ -1134,15 +1167,14 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
 	    (hw->chip_rev == CHIP_REV_YU_EC_U_A1
 	     || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
-		sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
+		sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
 
 	sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
 
 	rx_set_checksum(sky2);
 
 	/* Space needed for frame data + headers rounded up */
-	size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8)
-		+ 8;
+	size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8);
 
 	/* Stopping point for hardware truncation */
 	thresh = (size - 8) / sizeof(u32);
@@ -1197,7 +1229,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	}
 
 	/* Tell chip about available buffers */
-	sky2_put_idx(hw, rxq, sky2->rx_put);
+	sky2_rx_update(sky2, rxq);
 	return 0;
 nomem:
 	sky2_rx_clean(sky2);
@@ -1234,6 +1266,8 @@ static int sky2_up(struct net_device *dev)
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 
+	netif_carrier_off(dev);
+
 	/* must be power of 2 */
 	sky2->tx_le = pci_alloc_consistent(hw->pdev,
 					   TX_RING_SIZE *
@@ -1285,6 +1319,10 @@ static int sky2_up(struct net_device *dev)
 
 	sky2_qset(hw, txqaddr[port]);
 
+	/* This is copied from sk98lin 10.0.5.3; no one tells me about erratta's */
+	if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev == CHIP_REV_YU_EX_B0)
+		sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
+
 	/* Set almost empty threshold */
 	if (hw->chip_id == CHIP_ID_YUKON_EC_U
 	    && hw->chip_rev == CHIP_REV_YU_EC_U_A0)
@@ -1380,27 +1418,30 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 
 	len = skb_headlen(skb);
 	mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
-	addr64 = high32(mapping);
+	addr64 = upper_32_bits(mapping);
 
 	/* Send high bits if changed or crosses boundary */
-	if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) {
+	if (addr64 != sky2->tx_addr64 ||
+	    upper_32_bits(mapping + len) != sky2->tx_addr64) {
 		le = get_tx_le(sky2);
 		le->addr = cpu_to_le32(addr64);
 		le->opcode = OP_ADDR64 | HW_OWNER;
-		sky2->tx_addr64 = high32(mapping + len);
+		sky2->tx_addr64 = upper_32_bits(mapping + len);
 	}
 
 	/* Check for TCP Segmentation Offload */
 	mss = skb_shinfo(skb)->gso_size;
 	if (mss != 0) {
-		mss += tcp_optlen(skb); /* TCP options */
-		mss += ip_hdrlen(skb) + sizeof(struct tcphdr);
-		mss += ETH_HLEN;
-
-		if (mss != sky2->tx_last_mss) {
-			le = get_tx_le(sky2);
-			le->addr = cpu_to_le32(mss);
-			le->opcode = OP_LRGLEN | HW_OWNER;
+		if (hw->chip_id != CHIP_ID_YUKON_EX)
+			mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb);
+
+  		if (mss != sky2->tx_last_mss) {
+  			le = get_tx_le(sky2);
+  			le->addr = cpu_to_le32(mss);
+ 			if (hw->chip_id == CHIP_ID_YUKON_EX)
+				le->opcode = OP_MSS | HW_OWNER;
+			else
+				le->opcode = OP_LRGLEN | HW_OWNER;
 			sky2->tx_last_mss = mss;
 		}
 	}
@@ -1422,24 +1463,30 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 
 	/* Handle TCP checksum offload */
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		const unsigned offset = skb_transport_offset(skb);
-		u32 tcpsum;
-
-		tcpsum = offset << 16;		/* sum start */
-		tcpsum |= offset + skb->csum_offset;	/* sum write */
-
-		ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
-		if (ip_hdr(skb)->protocol == IPPROTO_UDP)
-			ctrl |= UDPTCP;
-
-		if (tcpsum != sky2->tx_tcpsum) {
-			sky2->tx_tcpsum = tcpsum;
-
-			le = get_tx_le(sky2);
-			le->addr = cpu_to_le32(tcpsum);
-			le->length = 0;	/* initial checksum value */
-			le->ctrl = 1;	/* one packet */
-			le->opcode = OP_TCPLISW | HW_OWNER;
+		/* On Yukon EX (some versions) encoding change. */
+ 		if (hw->chip_id == CHIP_ID_YUKON_EX
+		    && hw->chip_rev != CHIP_REV_YU_EX_B0)
+ 			ctrl |= CALSUM;	/* auto checksum */
+		else {
+			const unsigned offset = skb_transport_offset(skb);
+			u32 tcpsum;
+
+			tcpsum = offset << 16;			/* sum start */
+			tcpsum |= offset + skb->csum_offset;	/* sum write */
+
+			ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM;
+			if (ip_hdr(skb)->protocol == IPPROTO_UDP)
+				ctrl |= UDPTCP;
+
+			if (tcpsum != sky2->tx_tcpsum) {
+				sky2->tx_tcpsum = tcpsum;
+
+				le = get_tx_le(sky2);
+				le->addr = cpu_to_le32(tcpsum);
+				le->length = 0;	/* initial checksum value */
+				le->ctrl = 1;	/* one packet */
+				le->opcode = OP_TCPLISW | HW_OWNER;
+			}
 		}
 	}
 
@@ -1459,7 +1506,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 
 		mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
 				       frag->size, PCI_DMA_TODEVICE);
-		addr64 = high32(mapping);
+		addr64 = upper_32_bits(mapping);
 		if (addr64 != sky2->tx_addr64) {
 			le = get_tx_le(sky2);
 			le->addr = cpu_to_le32(addr64);
@@ -1529,13 +1576,13 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 			if (unlikely(netif_msg_tx_done(sky2)))
 				printk(KERN_DEBUG "%s: tx done %u\n",
 				       dev->name, idx);
+
 			sky2->net_stats.tx_packets++;
 			sky2->net_stats.tx_bytes += re->skb->len;
 
 			dev_kfree_skb_any(re->skb);
+			sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE);
 		}
-
-		le->opcode = 0;	/* paranoia */
 	}
 
 	sky2->tx_cons = idx;
@@ -1573,7 +1620,6 @@ static int sky2_down(struct net_device *dev)
 
 	/* Stop more packets from being queued */
 	netif_stop_queue(dev);
-	netif_carrier_off(dev);
 
 	/* Disable port IRQ */
 	imask = sky2_read32(hw, B0_IMSK);
@@ -1625,6 +1671,8 @@ static int sky2_down(struct net_device *dev)
 
 	sky2_phy_power(hw, port, 0);
 
+	netif_carrier_off(dev);
+
 	/* turn off LED's */
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 
@@ -1689,7 +1737,6 @@ static void sky2_link_up(struct sky2_port *sky2)
 	gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
 
 	netif_carrier_on(sky2->netdev);
-	netif_wake_queue(sky2->netdev);
 
 	/* Turn on link LED */
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
@@ -1741,7 +1788,6 @@ static void sky2_link_down(struct sky2_port *sky2)
 	gma_write16(hw, port, GM_GP_CTRL, reg);
 
 	netif_carrier_off(sky2->netdev);
-	netif_stop_queue(sky2->netdev);
 
 	/* Turn on link LED */
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
@@ -1913,15 +1959,8 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
 
 	synchronize_irq(hw->pdev->irq);
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
-		if (new_mtu > ETH_DATA_LEN) {
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-				     TX_JUMBO_ENA | TX_STFW_DIS);
-			dev->features &= NETIF_F_TSO | NETIF_F_SG | NETIF_F_IP_CSUM;
-		} else
-			sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
-				     TX_JUMBO_DIS | TX_STFW_ENA);
-	}
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)
+		sky2_set_tx_stfwd(hw, port);
 
 	ctl = gma_read16(hw, port, GM_GP_CTRL);
 	gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA);
@@ -2019,8 +2058,6 @@ static struct sk_buff *receive_new(struct sky2_port *sky2,
 	struct sk_buff *skb, *nskb;
 	unsigned hdr_space = sky2->rx_data_size;
 
-	pr_debug(PFX "receive new length=%d\n", length);
-
 	/* Don't be tricky about reusing pages (yet) */
 	nskb = sky2_rx_alloc(sky2);
 	if (unlikely(!nskb))
@@ -2064,6 +2101,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 	if (!(status & GMR_FS_RX_OK))
 		goto resubmit;
 
+	if (status >> 16 != length)
+		goto len_mismatch;
+
 	if (length < copybreak)
 		skb = receive_copy(sky2, re, length);
 	else
@@ -2073,6 +2113,11 @@ resubmit:
 
 	return skb;
 
+len_mismatch:
+	/* Truncation of overlength packets
+	   causes PHY length to not match MAC length */
+	++sky2->net_stats.rx_length_errors;
+
 error:
 	++sky2->net_stats.rx_errors;
 	if (status & GMR_FS_RX_FF_OV) {
@@ -2109,15 +2154,16 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
-	struct sky2_port *sky2;
 	int work_done = 0;
-	unsigned buf_write[2] = { 0, 0 };
+	unsigned rx[2] = { 0, 0 };
 	u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
 
 	rmb();
 
 	while (hw->st_idx != hwidx) {
+		struct sky2_port *sky2;
 		struct sky2_status_le *le  = hw->st_le + hw->st_idx;
+		unsigned port = le->css & CSS_LINK_BIT;
 		struct net_device *dev;
 		struct sk_buff *skb;
 		u32 status;
@@ -2125,19 +2171,28 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 
 		hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
 
-		BUG_ON(le->link >= 2);
-		dev = hw->dev[le->link];
-
+		dev = hw->dev[port];
 		sky2 = netdev_priv(dev);
 		length = le16_to_cpu(le->length);
 		status = le32_to_cpu(le->status);
 
 		switch (le->opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
+			++rx[port];
 			skb = sky2_receive(dev, length, status);
 			if (unlikely(!skb)) {
 				sky2->net_stats.rx_dropped++;
-				goto force_update;
+				break;
+			}
+
+			/* This chip reports checksum status differently */
+			if (hw->chip_id == CHIP_ID_YUKON_EX) {
+				if (sky2->rx_csum &&
+				    (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) &&
+				    (le->css & CSS_TCPUDPCSOK))
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+				else
+					skb->ip_summed = CHECKSUM_NONE;
 			}
 
 			skb->protocol = eth_type_trans(skb, dev);
@@ -2154,13 +2209,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 #endif
 				netif_receive_skb(skb);
 
-			/* Update receiver after 16 frames */
-			if (++buf_write[le->link] == RX_BUF_WRITE) {
-force_update:
-				sky2_put_idx(hw, rxqaddr[le->link], sky2->rx_put);
-				buf_write[le->link] = 0;
-			}
-
 			/* Stop after net poll weight */
 			if (++work_done >= to_do)
 				goto exit_loop;
@@ -2179,6 +2227,9 @@ force_update:
 			if (!sky2->rx_csum)
 				break;
 
+			if (hw->chip_id == CHIP_ID_YUKON_EX)
+				break;
+
 			/* Both checksum counters are programmed to start at
 			 * the same offset, so unless there is a problem they
 			 * should match. This failure is an early indication that
@@ -2194,7 +2245,7 @@ force_update:
 				       dev->name, status);
 				sky2->rx_csum = 0;
 				sky2_write32(sky2->hw,
-					     Q_ADDR(rxqaddr[le->link], Q_CSR),
+					     Q_ADDR(rxqaddr[port], Q_CSR),
 					     BMU_DIS_RX_CHKSUM);
 			}
 			break;
@@ -2213,24 +2264,18 @@ force_update:
 			if (net_ratelimit())
 				printk(KERN_WARNING PFX
 				       "unknown status opcode 0x%x\n", le->opcode);
-			goto exit_loop;
 		}
 	}
 
 	/* Fully processed status ring so clear irq */
 	sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-	mmiowb();
 
 exit_loop:
-	if (buf_write[0]) {
-		sky2 = netdev_priv(hw->dev[0]);
-		sky2_put_idx(hw, Q_R1, sky2->rx_put);
-	}
+	if (rx[0])
+		sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
 
-	if (buf_write[1]) {
-		sky2 = netdev_priv(hw->dev[1]);
-		sky2_put_idx(hw, Q_R2, sky2->rx_put);
-	}
+	if (rx[1])
+		sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
 
 	return work_done;
 }
@@ -2427,8 +2472,7 @@ static void sky2_err_intr(struct sky2_hw *hw, u32 status)
 static int sky2_poll(struct net_device *dev0, int *budget)
 {
 	struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
-	int work_limit = min(dev0->quota, *budget);
-	int work_done = 0;
+	int work_done;
 	u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
 
 	if (unlikely(status & Y2_IS_ERROR))
@@ -2440,18 +2484,25 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	if (status & Y2_IS_IRQ_PHY2)
 		sky2_phy_intr(hw, 1);
 
-	work_done = sky2_status_intr(hw, work_limit);
-	if (work_done < work_limit) {
-		netif_rx_complete(dev0);
+	work_done = sky2_status_intr(hw, min(dev0->quota, *budget));
+	*budget -= work_done;
+	dev0->quota -= work_done;
 
-		/* end of interrupt, re-enables also acts as I/O synchronization */
-		sky2_read32(hw, B0_Y2_SP_LISR);
-		return 0;
-	} else {
-		*budget -= work_done;
-		dev0->quota -= work_done;
+	/* More work? */
+ 	if (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX))
 		return 1;
+
+	/* Bug/Errata workaround?
+	 * Need to kick the TX irq moderation timer.
+	 */
+	if (sky2_read8(hw, STAT_TX_TIMER_CTRL) == TIM_START) {
+		sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
+		sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
 	}
+	netif_rx_complete(dev0);
+
+	sky2_read32(hw, B0_Y2_SP_LISR);
+	return 0;
 }
 
 static irqreturn_t sky2_intr(int irq, void *dev_id)
@@ -2513,6 +2564,9 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 {
 	u8 t8;
 
+	/* Enable all clocks */
+	sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
 	hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
@@ -2522,14 +2576,6 @@ static int __devinit sky2_init(struct sky2_hw *hw)
 		return -EOPNOTSUPP;
 	}
 
-	if (hw->chip_id == CHIP_ID_YUKON_EX)
-		dev_warn(&hw->pdev->dev, "this driver not yet tested on this chip type\n"
-			 "Please report success or failure to <netdev@vger.kernel.org>\n");
-
-	/* Make sure and enable all clocks */
-	if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
-		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
-
 	hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
 
 	/* This rev is really old, and requires untested workarounds */
@@ -2589,6 +2635,11 @@ static void sky2_reset(struct sky2_hw *hw)
 	for (i = 0; i < hw->ports; i++) {
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
 		sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+		if (hw->chip_id == CHIP_ID_YUKON_EX)
+			sky2_write16(hw, SK_REG(i, GMAC_CTRL),
+				     GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
+				     | GMC_BYP_RETR_ON);
 	}
 
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
@@ -2675,8 +2726,6 @@ static void sky2_restart(struct work_struct *work)
 	struct net_device *dev;
 	int i, err;
 
-	dev_dbg(&hw->pdev->dev, "restarting\n");
-
 	del_timer_sync(&hw->idle_timer);
 
 	rtnl_lock();
@@ -2735,7 +2784,7 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 
 	sky2->wol = wol->wolopts;
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U)
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)
 		sky2_write32(hw, B0_CTST, sky2->wol
 			     ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
 
@@ -3330,7 +3379,7 @@ static int sky2_get_regs_len(struct net_device *dev)
 
 /*
  * Returns copy of control register region
- * Note: access to the RAM address register set will cause timeouts.
+ * Note: ethtool_get_regs always provides full size (16k) buffer
  */
 static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 			  void *p)
@@ -3338,15 +3387,19 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs,
 	const struct sky2_port *sky2 = netdev_priv(dev);
 	const void __iomem *io = sky2->hw->regs;
 
-	BUG_ON(regs->len < B3_RI_WTO_R1);
 	regs->version = 1;
 	memset(p, 0, regs->len);
 
 	memcpy_fromio(p, io, B3_RAM_ADDR);
 
-	memcpy_fromio(p + B3_RI_WTO_R1,
-		      io + B3_RI_WTO_R1,
-		      regs->len - B3_RI_WTO_R1);
+	/* skip diagnostic ram region */
+	memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, 0x2000 - B3_RI_WTO_R1);
+
+	/* copy GMAC registers */
+	memcpy_fromio(p + BASE_GMAC_1, io + BASE_GMAC_1, 0x1000);
+	if (sky2->hw->ports > 1)
+		memcpy_fromio(p + BASE_GMAC_2, io + BASE_GMAC_2, 0x1000);
+
 }
 
 /* In order to do Jumbo packets on these chips, need to turn off the
@@ -3357,9 +3410,7 @@ static int no_tx_offload(struct net_device *dev)
 	const struct sky2_port *sky2 = netdev_priv(dev);
 	const struct sky2_hw *hw = sky2->hw;
 
-	return dev->mtu > ETH_DATA_LEN &&
-		(hw->chip_id == CHIP_ID_YUKON_EX
-		 || hw->chip_id == CHIP_ID_YUKON_EC_U);
+	return dev->mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_EC_U;
 }
 
 static int sky2_set_tx_csum(struct net_device *dev, u32 data)
@@ -3379,39 +3430,315 @@ static int sky2_set_tso(struct net_device *dev, u32 data)
 	return ethtool_op_set_tso(dev, data);
 }
 
+static int sky2_get_eeprom_len(struct net_device *dev)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	u16 reg2;
+
+	reg2 = sky2_pci_read32(sky2->hw, PCI_DEV_REG2);
+	return 1 << ( ((reg2 & PCI_VPD_ROM_SZ) >> 14) + 8);
+}
+
+static u32 sky2_vpd_read(struct sky2_hw *hw, int cap, u16 offset)
+{
+	sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset);
+
+	while (!(sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F))
+			cpu_relax();
+	return sky2_pci_read32(hw, cap + PCI_VPD_DATA);
+}
+
+static void sky2_vpd_write(struct sky2_hw *hw, int cap, u16 offset, u32 val)
+{
+	sky2_pci_write32(hw, cap + PCI_VPD_DATA, val);
+	sky2_pci_write16(hw, cap + PCI_VPD_ADDR, offset | PCI_VPD_ADDR_F);
+	do {
+		cpu_relax();
+	} while (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F);
+}
+
+static int sky2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+			   u8 *data)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+	int length = eeprom->len;
+	u16 offset = eeprom->offset;
+
+	if (!cap)
+		return -EINVAL;
+
+	eeprom->magic = SKY2_EEPROM_MAGIC;
+
+	while (length > 0) {
+		u32 val = sky2_vpd_read(sky2->hw, cap, offset);
+		int n = min_t(int, length, sizeof(val));
+
+		memcpy(data, &val, n);
+		length -= n;
+		data += n;
+		offset += n;
+	}
+	return 0;
+}
+
+static int sky2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+			   u8 *data)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	int cap = pci_find_capability(sky2->hw->pdev, PCI_CAP_ID_VPD);
+	int length = eeprom->len;
+	u16 offset = eeprom->offset;
+
+	if (!cap)
+		return -EINVAL;
+
+	if (eeprom->magic != SKY2_EEPROM_MAGIC)
+		return -EINVAL;
+
+	while (length > 0) {
+		u32 val;
+		int n = min_t(int, length, sizeof(val));
+
+		if (n < sizeof(val))
+			val = sky2_vpd_read(sky2->hw, cap, offset);
+		memcpy(&val, data, n);
+
+		sky2_vpd_write(sky2->hw, cap, offset, val);
+
+		length -= n;
+		data += n;
+		offset += n;
+	}
+	return 0;
+}
+
+
 static const struct ethtool_ops sky2_ethtool_ops = {
-	.get_settings = sky2_get_settings,
-	.set_settings = sky2_set_settings,
-	.get_drvinfo  = sky2_get_drvinfo,
-	.get_wol      = sky2_get_wol,
-	.set_wol      = sky2_set_wol,
-	.get_msglevel = sky2_get_msglevel,
-	.set_msglevel = sky2_set_msglevel,
-	.nway_reset   = sky2_nway_reset,
-	.get_regs_len = sky2_get_regs_len,
-	.get_regs = sky2_get_regs,
-	.get_link = ethtool_op_get_link,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = sky2_set_tx_csum,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = sky2_set_tso,
-	.get_rx_csum = sky2_get_rx_csum,
-	.set_rx_csum = sky2_set_rx_csum,
-	.get_strings = sky2_get_strings,
-	.get_coalesce = sky2_get_coalesce,
-	.set_coalesce = sky2_set_coalesce,
-	.get_ringparam = sky2_get_ringparam,
-	.set_ringparam = sky2_set_ringparam,
+	.get_settings	= sky2_get_settings,
+	.set_settings	= sky2_set_settings,
+	.get_drvinfo	= sky2_get_drvinfo,
+	.get_wol	= sky2_get_wol,
+	.set_wol	= sky2_set_wol,
+	.get_msglevel	= sky2_get_msglevel,
+	.set_msglevel	= sky2_set_msglevel,
+	.nway_reset	= sky2_nway_reset,
+	.get_regs_len	= sky2_get_regs_len,
+	.get_regs	= sky2_get_regs,
+	.get_link	= ethtool_op_get_link,
+	.get_eeprom_len	= sky2_get_eeprom_len,
+	.get_eeprom	= sky2_get_eeprom,
+	.set_eeprom	= sky2_set_eeprom,
+	.get_sg 	= ethtool_op_get_sg,
+	.set_sg 	= ethtool_op_set_sg,
+	.get_tx_csum	= ethtool_op_get_tx_csum,
+	.set_tx_csum	= sky2_set_tx_csum,
+	.get_tso	= ethtool_op_get_tso,
+	.set_tso	= sky2_set_tso,
+	.get_rx_csum	= sky2_get_rx_csum,
+	.set_rx_csum	= sky2_set_rx_csum,
+	.get_strings	= sky2_get_strings,
+	.get_coalesce	= sky2_get_coalesce,
+	.set_coalesce	= sky2_set_coalesce,
+	.get_ringparam	= sky2_get_ringparam,
+	.set_ringparam	= sky2_set_ringparam,
 	.get_pauseparam = sky2_get_pauseparam,
 	.set_pauseparam = sky2_set_pauseparam,
-	.phys_id = sky2_phys_id,
+	.phys_id	= sky2_phys_id,
 	.get_stats_count = sky2_get_stats_count,
 	.get_ethtool_stats = sky2_get_ethtool_stats,
 	.get_perm_addr	= ethtool_op_get_perm_addr,
 };
 
+#ifdef CONFIG_SKY2_DEBUG
+
+static struct dentry *sky2_debug;
+
+static int sky2_debug_show(struct seq_file *seq, void *v)
+{
+	struct net_device *dev = seq->private;
+	const struct sky2_port *sky2 = netdev_priv(dev);
+	const struct sky2_hw *hw = sky2->hw;
+	unsigned port = sky2->port;
+	unsigned idx, last;
+	int sop;
+
+	if (!netif_running(dev))
+		return -ENETDOWN;
+
+	seq_printf(seq, "IRQ src=%x mask=%x control=%x\n",
+		   sky2_read32(hw, B0_ISRC),
+		   sky2_read32(hw, B0_IMSK),
+		   sky2_read32(hw, B0_Y2_SP_ICR));
+
+	netif_poll_disable(hw->dev[0]);
+	last = sky2_read16(hw, STAT_PUT_IDX);
+
+	if (hw->st_idx == last)
+		seq_puts(seq, "Status ring (empty)\n");
+	else {
+		seq_puts(seq, "Status ring\n");
+		for (idx = hw->st_idx; idx != last && idx < STATUS_RING_SIZE;
+		     idx = RING_NEXT(idx, STATUS_RING_SIZE)) {
+			const struct sky2_status_le *le = hw->st_le + idx;
+			seq_printf(seq, "[%d] %#x %d %#x\n",
+				   idx, le->opcode, le->length, le->status);
+		}
+		seq_puts(seq, "\n");
+	}
+
+	seq_printf(seq, "Tx ring pending=%u...%u report=%d done=%d\n",
+		   sky2->tx_cons, sky2->tx_prod,
+		   sky2_read16(hw, port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+		   sky2_read16(hw, Q_ADDR(txqaddr[port], Q_DONE)));
+
+	/* Dump contents of tx ring */
+	sop = 1;
+	for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < TX_RING_SIZE;
+	     idx = RING_NEXT(idx, TX_RING_SIZE)) {
+		const struct sky2_tx_le *le = sky2->tx_le + idx;
+		u32 a = le32_to_cpu(le->addr);
+
+		if (sop)
+			seq_printf(seq, "%u:", idx);
+		sop = 0;
+
+		switch(le->opcode & ~HW_OWNER) {
+		case OP_ADDR64:
+			seq_printf(seq, " %#x:", a);
+			break;
+		case OP_LRGLEN:
+			seq_printf(seq, " mtu=%d", a);
+			break;
+		case OP_VLAN:
+			seq_printf(seq, " vlan=%d", be16_to_cpu(le->length));
+			break;
+		case OP_TCPLISW:
+			seq_printf(seq, " csum=%#x", a);
+			break;
+		case OP_LARGESEND:
+			seq_printf(seq, " tso=%#x(%d)", a, le16_to_cpu(le->length));
+			break;
+		case OP_PACKET:
+			seq_printf(seq, " %#x(%d)", a, le16_to_cpu(le->length));
+			break;
+		case OP_BUFFER:
+			seq_printf(seq, " frag=%#x(%d)", a, le16_to_cpu(le->length));
+			break;
+		default:
+			seq_printf(seq, " op=%#x,%#x(%d)", le->opcode,
+				   a, le16_to_cpu(le->length));
+		}
+
+		if (le->ctrl & EOP) {
+			seq_putc(seq, '\n');
+			sop = 1;
+		}
+	}
+
+	seq_printf(seq, "\nRx ring hw get=%d put=%d last=%d\n",
+		   sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_GET_IDX)),
+		   last = sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_PUT_IDX)),
+		   sky2_read16(hw, Y2_QADDR(rxqaddr[port], PREF_UNIT_LAST_IDX)));
+
+	netif_poll_enable(hw->dev[0]);
+	return 0;
+}
+
+static int sky2_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sky2_debug_show, inode->i_private);
+}
+
+static const struct file_operations sky2_debug_fops = {
+	.owner		= THIS_MODULE,
+	.open		= sky2_debug_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+/*
+ * Use network device events to create/remove/rename
+ * debugfs file entries
+ */
+static int sky2_device_event(struct notifier_block *unused,
+			     unsigned long event, void *ptr)
+{
+	struct net_device *dev = ptr;
+
+	if (dev->open == sky2_up) {
+		struct sky2_port *sky2 = netdev_priv(dev);
+
+		switch(event) {
+		case NETDEV_CHANGENAME:
+			if (!netif_running(dev))
+				break;
+			/* fallthrough */
+		case NETDEV_DOWN:
+		case NETDEV_GOING_DOWN:
+			if (sky2->debugfs) {
+				printk(KERN_DEBUG PFX "%s: remove debugfs\n",
+				       dev->name);
+				debugfs_remove(sky2->debugfs);
+				sky2->debugfs = NULL;
+			}
+
+			if (event != NETDEV_CHANGENAME)
+				break;
+			/* fallthrough for changename */
+		case NETDEV_UP:
+			if (sky2_debug) {
+				struct dentry *d;
+				d = debugfs_create_file(dev->name, S_IRUGO,
+							sky2_debug, dev,
+							&sky2_debug_fops);
+				if (d == NULL || IS_ERR(d))
+					printk(KERN_INFO PFX
+					       "%s: debugfs create failed\n",
+					       dev->name);
+				else
+					sky2->debugfs = d;
+			}
+			break;
+		}
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block sky2_notifier = {
+	.notifier_call = sky2_device_event,
+};
+
+
+static __init void sky2_debug_init(void)
+{
+	struct dentry *ent;
+
+	ent = debugfs_create_dir("sky2", NULL);
+	if (!ent || IS_ERR(ent))
+		return;
+
+	sky2_debug = ent;
+	register_netdevice_notifier(&sky2_notifier);
+}
+
+static __exit void sky2_debug_cleanup(void)
+{
+	if (sky2_debug) {
+		unregister_netdevice_notifier(&sky2_notifier);
+		debugfs_remove(sky2_debug);
+		sky2_debug = NULL;
+	}
+}
+
+#else
+#define sky2_debug_init()
+#define sky2_debug_cleanup()
+#endif
+
+
 /* Initialize network device */
 static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 						     unsigned port,
@@ -3486,10 +3813,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
-	/* device is off until link detection */
-	netif_carrier_off(dev);
-	netif_stop_queue(dev);
-
 	return dev;
 }
 
@@ -3906,12 +4229,14 @@ static struct pci_driver sky2_driver = {
 
 static int __init sky2_init_module(void)
 {
+	sky2_debug_init();
 	return pci_register_driver(&sky2_driver);
 }
 
 static void __exit sky2_cleanup_module(void)
 {
 	pci_unregister_driver(&sky2_driver);
+	sky2_debug_cleanup();
 }
 
 module_init(sky2_init_module);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index b8c4a3b5eadf..dce4d276d443 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -14,6 +14,8 @@ enum {
 	PCI_DEV_REG3	= 0x80,
 	PCI_DEV_REG4	= 0x84,
 	PCI_DEV_REG5    = 0x88,
+	PCI_CFG_REG_0	= 0x90,
+	PCI_CFG_REG_1	= 0x94,
 };
 
 enum {
@@ -28,6 +30,7 @@ enum {
 enum pci_dev_reg_1 {
 	PCI_Y2_PIG_ENA	 = 1<<31, /* Enable Plug-in-Go (YUKON-2) */
 	PCI_Y2_DLL_DIS	 = 1<<30, /* Disable PCI DLL (YUKON-2) */
+	PCI_SW_PWR_ON_RST= 1<<30, /* SW Power on Reset (Yukon-EX) */
 	PCI_Y2_PHY2_COMA = 1<<29, /* Set PHY 2 to Coma Mode (YUKON-2) */
 	PCI_Y2_PHY1_COMA = 1<<28, /* Set PHY 1 to Coma Mode (YUKON-2) */
 	PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */
@@ -67,6 +70,80 @@ enum pci_dev_reg_4 {
 				  | P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY,
 };
 
+/*	PCI_OUR_REG_5		32 bit	Our Register 5 (Yukon-ECU only) */
+enum pci_dev_reg_5 {
+					/* Bit 31..27:	for A3 & later */
+	P_CTL_DIV_CORE_CLK_ENA	= 1<<31, /* Divide Core Clock Enable */
+	P_CTL_SRESET_VMAIN_AV	= 1<<30, /* Soft Reset for Vmain_av De-Glitch */
+	P_CTL_BYPASS_VMAIN_AV	= 1<<29, /* Bypass En. for Vmain_av De-Glitch */
+	P_CTL_TIM_VMAIN_AV_MSK	= 3<<27, /* Bit 28..27: Timer Vmain_av Mask */
+					 /* Bit 26..16: Release Clock on Event */
+	P_REL_PCIE_RST_DE_ASS	= 1<<26, /* PCIe Reset De-Asserted */
+	P_REL_GPHY_REC_PACKET	= 1<<25, /* GPHY Received Packet */
+	P_REL_INT_FIFO_N_EMPTY	= 1<<24, /* Internal FIFO Not Empty */
+	P_REL_MAIN_PWR_AVAIL	= 1<<23, /* Main Power Available */
+	P_REL_CLKRUN_REQ_REL	= 1<<22, /* CLKRUN Request Release */
+	P_REL_PCIE_RESET_ASS	= 1<<21, /* PCIe Reset Asserted */
+	P_REL_PME_ASSERTED	= 1<<20, /* PME Asserted */
+	P_REL_PCIE_EXIT_L1_ST	= 1<<19, /* PCIe Exit L1 State */
+	P_REL_LOADER_NOT_FIN	= 1<<18, /* EPROM Loader Not Finished */
+	P_REL_PCIE_RX_EX_IDLE	= 1<<17, /* PCIe Rx Exit Electrical Idle State */
+	P_REL_GPHY_LINK_UP	= 1<<16, /* GPHY Link Up */
+
+					/* Bit 10.. 0: Mask for Gate Clock */
+	P_GAT_PCIE_RST_ASSERTED	= 1<<10,/* PCIe Reset Asserted */
+	P_GAT_GPHY_N_REC_PACKET	= 1<<9, /* GPHY Not Received Packet */
+	P_GAT_INT_FIFO_EMPTY	= 1<<8, /* Internal FIFO Empty */
+	P_GAT_MAIN_PWR_N_AVAIL	= 1<<7, /* Main Power Not Available */
+	P_GAT_CLKRUN_REQ_REL	= 1<<6, /* CLKRUN Not Requested */
+	P_GAT_PCIE_RESET_ASS	= 1<<5, /* PCIe Reset Asserted */
+	P_GAT_PME_DE_ASSERTED	= 1<<4, /* PME De-Asserted */
+	P_GAT_PCIE_ENTER_L1_ST	= 1<<3, /* PCIe Enter L1 State */
+	P_GAT_LOADER_FINISHED	= 1<<2, /* EPROM Loader Finished */
+	P_GAT_PCIE_RX_EL_IDLE	= 1<<1, /* PCIe Rx Electrical Idle State */
+	P_GAT_GPHY_LINK_DOWN	= 1<<0,	/* GPHY Link Down */
+
+	PCIE_OUR5_EVENT_CLK_D3_SET = P_REL_GPHY_REC_PACKET |
+				     P_REL_INT_FIFO_N_EMPTY |
+				     P_REL_PCIE_EXIT_L1_ST |
+				     P_REL_PCIE_RX_EX_IDLE |
+				     P_GAT_GPHY_N_REC_PACKET |
+				     P_GAT_INT_FIFO_EMPTY |
+				     P_GAT_PCIE_ENTER_L1_ST |
+				     P_GAT_PCIE_RX_EL_IDLE,
+};
+
+#/*	PCI_CFG_REG_1			32 bit	Config Register 1 (Yukon-Ext only) */
+enum pci_cfg_reg1 {
+	P_CF1_DIS_REL_EVT_RST	= 1<<24, /* Dis. Rel. Event during PCIE reset */
+										/* Bit 23..21: Release Clock on Event */
+	P_CF1_REL_LDR_NOT_FIN	= 1<<23, /* EEPROM Loader Not Finished */
+	P_CF1_REL_VMAIN_AVLBL	= 1<<22, /* Vmain available */
+	P_CF1_REL_PCIE_RESET	= 1<<21, /* PCI-E reset */
+										/* Bit 20..18: Gate Clock on Event */
+	P_CF1_GAT_LDR_NOT_FIN	= 1<<20, /* EEPROM Loader Finished */
+	P_CF1_GAT_PCIE_RX_IDLE	= 1<<19, /* PCI-E Rx Electrical idle */
+	P_CF1_GAT_PCIE_RESET	= 1<<18, /* PCI-E Reset */
+	P_CF1_PRST_PHY_CLKREQ	= 1<<17, /* Enable PCI-E rst & PM2PHY gen. CLKREQ */
+	P_CF1_PCIE_RST_CLKREQ	= 1<<16, /* Enable PCI-E rst generate CLKREQ */
+
+	P_CF1_ENA_CFG_LDR_DONE	= 1<<8, /* Enable core level Config loader done */
+
+	P_CF1_ENA_TXBMU_RD_IDLE	= 1<<1, /* Enable TX BMU Read  IDLE for ASPM */
+	P_CF1_ENA_TXBMU_WR_IDLE	= 1<<0, /* Enable TX BMU Write IDLE for ASPM */
+
+	PCIE_CFG1_EVENT_CLK_D3_SET = P_CF1_DIS_REL_EVT_RST |
+					P_CF1_REL_LDR_NOT_FIN |
+					P_CF1_REL_VMAIN_AVLBL |
+					P_CF1_REL_PCIE_RESET |
+					P_CF1_GAT_LDR_NOT_FIN |
+					P_CF1_GAT_PCIE_RESET |
+					P_CF1_PRST_PHY_CLKREQ |
+					P_CF1_ENA_CFG_LDR_DONE |
+					P_CF1_ENA_TXBMU_RD_IDLE |
+					P_CF1_ENA_TXBMU_WR_IDLE,
+};
+
 
 #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
 			       PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -364,6 +441,20 @@ enum {
 	TST_CFG_WRITE_OFF= 1<<0, /* Disable Config Reg WR */
 };
 
+/* 	B2_GPIO */
+enum {
+	GLB_GPIO_CLK_DEB_ENA = 1<<31,	/* Clock Debug Enable */
+	GLB_GPIO_CLK_DBG_MSK = 0xf<<26, /* Clock Debug */
+
+	GLB_GPIO_INT_RST_D3_DIS = 1<<15, /* Disable Internal Reset After D3 to D0 */
+	GLB_GPIO_LED_PAD_SPEED_UP = 1<<14, /* LED PAD Speed Up */
+	GLB_GPIO_STAT_RACE_DIS	= 1<<13, /* Status Race Disable */
+	GLB_GPIO_TEST_SEL_MSK	= 3<<11, /* Testmode Select */
+	GLB_GPIO_TEST_SEL_BASE	= 1<<11,
+	GLB_GPIO_RAND_ENA	= 1<<10, /* Random Enable */
+	GLB_GPIO_RAND_BIT_1	= 1<<9,  /* Random Bit 1 */
+};
+
 /*	B2_MAC_CFG		 8 bit	MAC Configuration / Chip Revision */
 enum {
 	CFG_CHIP_R_MSK	  = 0xf<<4,	/* Bit 7.. 4: Chip Revision */
@@ -392,6 +483,11 @@ enum {
 	CHIP_REV_YU_FE_A2    = 2,
 
 };
+enum yukon_ex_rev {
+	CHIP_REV_YU_EX_A0    = 1,
+	CHIP_REV_YU_EX_B0    = 2,
+};
+
 
 /*	B2_Y2_CLK_GATE	 8 bit	Clock Gating (Yukon-2 only) */
 enum {
@@ -515,23 +611,15 @@ enum {
 enum {
 	B8_Q_REGS = 0x0400, /* base of Queue registers */
 	Q_D	= 0x00,	/* 8*32	bit	Current Descriptor */
-	Q_DA_L	= 0x20,	/* 32 bit	Current Descriptor Address Low dWord */
-	Q_DA_H	= 0x24,	/* 32 bit	Current Descriptor Address High dWord */
+	Q_VLAN  = 0x20, /* 16 bit	Current VLAN Tag */
+	Q_DONE	= 0x24,	/* 16 bit	Done Index */
 	Q_AC_L	= 0x28,	/* 32 bit	Current Address Counter Low dWord */
 	Q_AC_H	= 0x2c,	/* 32 bit	Current Address Counter High dWord */
 	Q_BC	= 0x30,	/* 32 bit	Current Byte Counter */
 	Q_CSR	= 0x34,	/* 32 bit	BMU Control/Status Register */
-	Q_F	= 0x38,	/* 32 bit	Flag Register */
-	Q_T1	= 0x3c,	/* 32 bit	Test Register 1 */
-	Q_T1_TR	= 0x3c,	/*  8 bit	Test Register 1 Transfer SM */
-	Q_T1_WR	= 0x3d,	/*  8 bit	Test Register 1 Write Descriptor SM */
-	Q_T1_RD	= 0x3e,	/*  8 bit	Test Register 1 Read Descriptor SM */
-	Q_T1_SV	= 0x3f,	/*  8 bit	Test Register 1 Supervisor SM */
-	Q_T2	= 0x40,	/* 32 bit	Test Register 2	*/
-	Q_T3	= 0x44,	/* 32 bit	Test Register 3	*/
+	Q_TEST	= 0x38,	/* 32 bit	Test/Control Register */
 
 /* Yukon-2 */
-	Q_DONE	= 0x24,	/* 16 bit	Done Index 		(Yukon-2 only) */
 	Q_WM	= 0x40,	/* 16 bit	FIFO Watermark */
 	Q_AL	= 0x42,	/*  8 bit	FIFO Alignment */
 	Q_RSP	= 0x44,	/* 16 bit	FIFO Read Shadow Pointer */
@@ -545,15 +633,16 @@ enum {
 };
 #define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
 
-/*	Q_F				32 bit	Flag Register */
+/*	Q_TEST				32 bit	Test Register */
 enum {
-	F_ALM_FULL	= 1<<27, /* Rx FIFO: almost full */
-	F_EMPTY		= 1<<27, /* Tx FIFO: empty flag */
-	F_FIFO_EOF	= 1<<26, /* Tag (EOF Flag) bit in FIFO */
-	F_WM_REACHED	= 1<<25, /* Watermark reached */
+	/* Transmit */
+	F_TX_CHK_AUTO_OFF = 1<<31, /* Tx checksum auto calc off (Yukon EX) */
+	F_TX_CHK_AUTO_ON  = 1<<30, /* Tx checksum auto calc off (Yukon EX) */
+
+	/* Receive */
 	F_M_RX_RAM_DIS	= 1<<24, /* MAC Rx RAM Read Port disable */
-	F_FIFO_LEVEL	= 0x1fL<<16, /* Bit 23..16:	# of Qwords in FIFO */
-	F_WATER_MARK	= 0x0007ffL, /* Bit 10.. 0:	Watermark */
+
+	/* Hardware testbits not used */
 };
 
 /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
@@ -1608,6 +1697,16 @@ enum {
 	RX_VLAN_STRIP_ON = 1<<25,	/* enable  VLAN stripping */
 	RX_VLAN_STRIP_OFF = 1<<24,	/* disable VLAN stripping */
 
+	RX_MACSEC_FLUSH_ON  = 1<<23,
+	RX_MACSEC_FLUSH_OFF = 1<<22,
+	RX_MACSEC_ASF_FLUSH_ON = 1<<21,
+	RX_MACSEC_ASF_FLUSH_OFF = 1<<20,
+
+	GMF_RX_OVER_ON      = 1<<19,	/* enable flushing on receive overrun */
+	GMF_RX_OVER_OFF     = 1<<18,	/* disable flushing on receive overrun */
+	GMF_ASF_RX_OVER_ON  = 1<<17,	/* enable flushing of ASF when overrun */
+	GMF_ASF_RX_OVER_OFF = 1<<16,	/* disable flushing of ASF when overrun */
+
 	GMF_WP_TST_ON	= 1<<14,	/* Write Pointer Test On */
 	GMF_WP_TST_OFF	= 1<<13,	/* Write Pointer Test Off */
 	GMF_WP_STEP	= 1<<12,	/* Write Pointer Step/Increment */
@@ -1720,6 +1819,15 @@ enum {
 
 /*	GMAC_CTRL		32 bit	GMAC Control Reg (YUKON only) */
 enum {
+	GMC_SET_RST	    = 1<<15,/* MAC SEC RST */
+	GMC_SEC_RST_OFF     = 1<<14,/* MAC SEC RSt OFF */
+	GMC_BYP_MACSECRX_ON = 1<<13,/* Bypass macsec RX */
+	GMC_BYP_MACSECRX_OFF= 1<<12,/* Bypass macsec RX off */
+	GMC_BYP_MACSECTX_ON = 1<<11,/* Bypass macsec TX */
+	GMC_BYP_MACSECTX_OFF= 1<<10,/* Bypass macsec TX  off*/
+	GMC_BYP_RETR_ON	= 1<<9, /* Bypass retransmit FIFO On */
+	GMC_BYP_RETR_OFF= 1<<8, /* Bypass retransmit FIFO Off */
+
 	GMC_H_BURST_ON	= 1<<7,	/* Half Duplex Burst Mode On */
 	GMC_H_BURST_OFF	= 1<<6,	/* Half Duplex Burst Mode Off */
 	GMC_F_LOOPB_ON	= 1<<5,	/* FIFO Loopback On */
@@ -1805,9 +1913,13 @@ enum {
 	OP_ADDR64VLAN	= OP_ADDR64 | OP_VLAN,
 	OP_LRGLEN	= 0x24,
 	OP_LRGLENVLAN	= OP_LRGLEN | OP_VLAN,
+	OP_MSS		= 0x28,
+	OP_MSSVLAN	= OP_MSS | OP_VLAN,
+
 	OP_BUFFER	= 0x40,
 	OP_PACKET	= 0x41,
 	OP_LARGESEND	= 0x43,
+	OP_LSOV2	= 0x45,
 
 /* YUKON-2 STATUS opcodes defines */
 	OP_RXSTAT	= 0x60,
@@ -1818,6 +1930,19 @@ enum {
 	OP_RXTIMEVLAN	= OP_RXTIMESTAMP | OP_RXVLAN,
 	OP_RSS_HASH	= 0x65,
 	OP_TXINDEXLE	= 0x68,
+	OP_MACSEC	= 0x6c,
+	OP_PUTIDX	= 0x70,
+};
+
+enum status_css {
+	CSS_TCPUDPCSOK	= 1<<7,	/* TCP / UDP checksum is ok */
+	CSS_ISUDP	= 1<<6, /* packet is a UDP packet */
+	CSS_ISTCP	= 1<<5, /* packet is a TCP packet */
+	CSS_ISIPFRAG	= 1<<4, /* packet is a TCP/UDP frag, CS calc not done */
+	CSS_ISIPV6	= 1<<3, /* packet is a IPv6 packet */
+	CSS_IPV4CSUMOK	= 1<<2, /* IP v4: TCP header checksum is ok */
+	CSS_ISIPV4	= 1<<1, /* packet is a IPv4 packet */
+	CSS_LINK_BIT	= 1<<0, /* port number (legacy) */
 };
 
 /* Yukon 2 hardware interface */
@@ -1838,7 +1963,7 @@ struct sky2_rx_le {
 struct sky2_status_le {
 	__le32	status;	/* also checksum */
 	__le16	length;	/* also vlan tag */
-	u8	link;
+	u8	css;
 	u8	opcode;
 } __attribute((packed));
 
@@ -1873,6 +1998,7 @@ struct sky2_port {
 	struct sky2_tx_le    *tx_le;
 	u16		     tx_cons;		/* next le to check */
 	u16		     tx_prod;		/* next le to use */
+	u16		     tx_next;		/* debug only */
 	u32		     tx_addr64;
 	u16		     tx_pending;
 	u16		     tx_last_mss;
@@ -1903,6 +2029,9 @@ struct sky2_port {
  	enum flow_control    flow_mode;
  	enum flow_control    flow_status;
 
+#ifdef CONFIG_SKY2_DEBUG
+	struct dentry	     *debugfs;
+#endif
 	struct net_device_stats net_stats;
 
 };
diff --git a/drivers/net/sni_82596.c b/drivers/net/sni_82596.c
new file mode 100644
index 000000000000..2cf6794acb4f
--- /dev/null
+++ b/drivers/net/sni_82596.c
@@ -0,0 +1,185 @@
+/*
+ * sni_82596.c -- driver for intel 82596 ethernet controller, as
+ *  		  used in older SNI RM machines
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#define SNI_82596_DRIVER_VERSION "SNI RM 82596 driver - Revision: 0.01"
+
+static const char sni_82596_string[] = "snirm_82596";
+
+#define DMA_ALLOC                      dma_alloc_coherent
+#define DMA_FREE                       dma_free_coherent
+#define DMA_WBACK(priv, addr, len)     do { } while (0)
+#define DMA_INV(priv, addr, len)       do { } while (0)
+#define DMA_WBACK_INV(priv, addr, len) do { } while (0)
+
+#define SYSBUS      0x00004400
+
+/* big endian CPU, 82596 little endian */
+#define SWAP32(x)   cpu_to_le32((u32)(x))
+#define SWAP16(x)   cpu_to_le16((u16)(x))
+
+#define OPT_MPU_16BIT    0x01
+
+#include "lib82596.c"
+
+MODULE_AUTHOR("Thomas Bogendoerfer");
+MODULE_DESCRIPTION("i82596 driver");
+MODULE_LICENSE("GPL");
+module_param(i596_debug, int, 0);
+MODULE_PARM_DESC(i596_debug, "82596 debug mask");
+
+static inline void ca(struct net_device *dev)
+{
+	struct i596_private *lp = netdev_priv(dev);
+
+	writel(0, lp->ca);
+}
+
+
+static void mpu_port(struct net_device *dev, int c, dma_addr_t x)
+{
+	struct i596_private *lp = netdev_priv(dev);
+
+	u32 v = (u32) (c) | (u32) (x);
+
+	if (lp->options & OPT_MPU_16BIT) {
+		writew(v & 0xffff, lp->mpu_port);
+		wmb();  /* order writes to MPU port */
+		udelay(1);
+		writew(v >> 16, lp->mpu_port);
+	} else {
+		writel(v, lp->mpu_port);
+		wmb();  /* order writes to MPU port */
+		udelay(1);
+		writel(v, lp->mpu_port);
+	}
+}
+
+
+static int __devinit sni_82596_probe(struct platform_device *dev)
+{
+	struct	net_device *netdevice;
+	struct i596_private *lp;
+	struct  resource *res, *ca, *idprom, *options;
+	int	retval = -ENOMEM;
+	void __iomem *mpu_addr;
+	void __iomem *ca_addr;
+	u8 __iomem *eth_addr;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	ca = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	options = platform_get_resource(dev, 0, 0);
+	idprom = platform_get_resource(dev, IORESOURCE_MEM, 2);
+	if (!res || !ca || !options || !idprom)
+		return -ENODEV;
+	mpu_addr = ioremap_nocache(res->start, 4);
+	if (!mpu_addr)
+		return -ENOMEM;
+	ca_addr = ioremap_nocache(ca->start, 4);
+	if (!ca_addr)
+		goto probe_failed_free_mpu;
+
+	printk(KERN_INFO "Found i82596 at 0x%x\n", res->start);
+
+	netdevice = alloc_etherdev(sizeof(struct i596_private));
+	if (!netdevice)
+		goto probe_failed_free_ca;
+
+	SET_NETDEV_DEV(netdevice, &dev->dev);
+	platform_set_drvdata (dev, netdevice);
+
+	netdevice->base_addr = res->start;
+	netdevice->irq = platform_get_irq(dev, 0);
+
+	eth_addr = ioremap_nocache(idprom->start, 0x10);
+	if (!eth_addr)
+		goto probe_failed;
+
+	/* someone seems to like messed up stuff */
+	netdevice->dev_addr[0] = readb(eth_addr + 0x0b);
+	netdevice->dev_addr[1] = readb(eth_addr + 0x0a);
+	netdevice->dev_addr[2] = readb(eth_addr + 0x09);
+	netdevice->dev_addr[3] = readb(eth_addr + 0x08);
+	netdevice->dev_addr[4] = readb(eth_addr + 0x07);
+	netdevice->dev_addr[5] = readb(eth_addr + 0x06);
+	iounmap(eth_addr);
+
+	if (!netdevice->irq) {
+		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
+			__FILE__, netdevice->base_addr);
+		goto probe_failed;
+	}
+
+	lp = netdev_priv(netdevice);
+	lp->options = options->flags & IORESOURCE_BITS;
+	lp->ca = ca_addr;
+	lp->mpu_port = mpu_addr;
+
+	retval = i82596_probe(netdevice);
+	if (retval == 0)
+		return 0;
+
+probe_failed:
+	free_netdev(netdevice);
+probe_failed_free_ca:
+	iounmap(ca_addr);
+probe_failed_free_mpu:
+	iounmap(mpu_addr);
+	return retval;
+}
+
+static int __devexit sni_82596_driver_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct i596_private *lp = netdev_priv(dev);
+
+	unregister_netdev(dev);
+	DMA_FREE(dev->dev.parent, sizeof(struct i596_private),
+		 lp->dma, lp->dma_addr);
+	iounmap(lp->ca);
+	iounmap(lp->mpu_port);
+	free_netdev (dev);
+	return 0;
+}
+
+static struct platform_driver sni_82596_driver = {
+	.probe	= sni_82596_probe,
+	.remove	= __devexit_p(sni_82596_driver_remove),
+	.driver	= {
+		.name	= sni_82596_string,
+	},
+};
+
+static int __devinit sni_82596_init(void)
+{
+	printk(KERN_INFO SNI_82596_DRIVER_VERSION "\n");
+	return platform_driver_register(&sni_82596_driver);
+}
+
+
+static void __exit sni_82596_exit(void)
+{
+	platform_driver_unregister(&sni_82596_driver);
+}
+
+module_init(sni_82596_init);
+module_exit(sni_82596_exit);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 7a4aa6a9f949..590b12c7246c 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -434,7 +434,8 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
 				      bufsize + SPIDER_NET_RXBUF_ALIGN - 1);
 	if (!descr->skb) {
 		if (netif_msg_rx_err(card) && net_ratelimit())
-			pr_err("Not enough memory to allocate rx buffer\n");
+			dev_err(&card->netdev->dev,
+			        "Not enough memory to allocate rx buffer\n");
 		card->spider_stats.alloc_rx_skb_error++;
 		return -ENOMEM;
 	}
@@ -455,7 +456,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card,
 		dev_kfree_skb_any(descr->skb);
 		descr->skb = NULL;
 		if (netif_msg_rx_err(card) && net_ratelimit())
-			pr_err("Could not iommu-map rx buffer\n");
+			dev_err(&card->netdev->dev, "Could not iommu-map rx buffer\n");
 		card->spider_stats.rx_iommu_map_error++;
 		hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
 	} else {
@@ -500,6 +501,20 @@ spider_net_enable_rxdmac(struct spider_net_card *card)
 }
 
 /**
+ * spider_net_disable_rxdmac - disables the receive DMA controller
+ * @card: card structure
+ *
+ * spider_net_disable_rxdmac terminates processing on the DMA controller
+ * by turing off the DMA controller, with the force-end flag set.
+ */
+static inline void
+spider_net_disable_rxdmac(struct spider_net_card *card)
+{
+	spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
+			     SPIDER_NET_DMA_RX_FEND_VALUE);
+}
+
+/**
  * spider_net_refill_rx_chain - refills descriptors/skbs in the rx chains
  * @card: card structure
  *
@@ -655,20 +670,6 @@ write_hash:
 }
 
 /**
- * spider_net_disable_rxdmac - disables the receive DMA controller
- * @card: card structure
- *
- * spider_net_disable_rxdmac terminates processing on the DMA controller by
- * turing off DMA and issueing a force end
- */
-static void
-spider_net_disable_rxdmac(struct spider_net_card *card)
-{
-	spider_net_write_reg(card, SPIDER_NET_GDADMACCNTR,
-			     SPIDER_NET_DMA_RX_FEND_VALUE);
-}
-
-/**
  * spider_net_prepare_tx_descr - fill tx descriptor with skb data
  * @card: card structure
  * @descr: descriptor structure to fill out
@@ -692,7 +693,7 @@ spider_net_prepare_tx_descr(struct spider_net_card *card,
 	buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
 	if (pci_dma_mapping_error(buf)) {
 		if (netif_msg_tx_err(card) && net_ratelimit())
-			pr_err("could not iommu-map packet (%p, %i). "
+			dev_err(&card->netdev->dev, "could not iommu-map packet (%p, %i). "
 				  "Dropping packet\n", skb->data, skb->len);
 		card->spider_stats.tx_iommu_map_error++;
 		return -ENOMEM;
@@ -715,7 +716,7 @@ spider_net_prepare_tx_descr(struct spider_net_card *card,
 	hwdescr->data_status = 0;
 
 	hwdescr->dmac_cmd_status =
-			SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_NOCS;
+			SPIDER_NET_DESCR_CARDOWNED | SPIDER_NET_DMAC_TXFRMTL;
 	spin_unlock_irqrestore(&chain->lock, flags);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL)
@@ -832,9 +833,8 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal)
 		case SPIDER_NET_DESCR_PROTECTION_ERROR:
 		case SPIDER_NET_DESCR_FORCE_END:
 			if (netif_msg_tx_err(card))
-				pr_err("%s: forcing end of tx descriptor "
-				       "with status x%02x\n",
-				       card->netdev->name, status);
+				dev_err(&card->netdev->dev, "forcing end of tx descriptor "
+				       "with status x%02x\n", status);
 			card->netdev_stats.tx_errors++;
 			break;
 
@@ -1022,34 +1022,94 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
 	netif_receive_skb(skb);
 }
 
-#ifdef DEBUG
 static void show_rx_chain(struct spider_net_card *card)
 {
 	struct spider_net_descr_chain *chain = &card->rx_chain;
 	struct spider_net_descr *start= chain->tail;
 	struct spider_net_descr *descr= start;
+	struct spider_net_hw_descr *hwd = start->hwdescr;
+	struct device *dev = &card->netdev->dev;
+	u32 curr_desc, next_desc;
 	int status;
 
+	int tot = 0;
 	int cnt = 0;
-	int cstat = spider_net_get_descr_status(descr);
-	printk(KERN_INFO "RX chain tail at descr=%ld\n",
-	     (start - card->descr) - card->tx_chain.num_desc);
+	int off = start - chain->ring;
+	int cstat = hwd->dmac_cmd_status;
+
+	dev_info(dev, "Total number of descrs=%d\n",
+		chain->num_desc);
+	dev_info(dev, "Chain tail located at descr=%d, status=0x%x\n",
+		off, cstat);
+
+	curr_desc = spider_net_read_reg(card, SPIDER_NET_GDACTDPA);
+	next_desc = spider_net_read_reg(card, SPIDER_NET_GDACNEXTDA);
+
 	status = cstat;
 	do
 	{
-		status = spider_net_get_descr_status(descr);
+		hwd = descr->hwdescr;
+		off = descr - chain->ring;
+		status = hwd->dmac_cmd_status;
+
+		if (descr == chain->head)
+			dev_info(dev, "Chain head is at %d, head status=0x%x\n",
+			         off, status);
+
+		if (curr_desc == descr->bus_addr)
+			dev_info(dev, "HW curr desc (GDACTDPA) is at %d, status=0x%x\n",
+			         off, status);
+
+		if (next_desc == descr->bus_addr)
+			dev_info(dev, "HW next desc (GDACNEXTDA) is at %d, status=0x%x\n",
+			         off, status);
+
+		if (hwd->next_descr_addr == 0)
+			dev_info(dev, "chain is cut at %d\n", off);
+
 		if (cstat != status) {
-			printk(KERN_INFO "Have %d descrs with stat=x%08x\n", cnt, cstat);
+			int from = (chain->num_desc + off - cnt) % chain->num_desc;
+			int to = (chain->num_desc + off - 1) % chain->num_desc;
+			dev_info(dev, "Have %d (from %d to %d) descrs "
+			         "with stat=0x%08x\n", cnt, from, to, cstat);
 			cstat = status;
 			cnt = 0;
 		}
+
 		cnt ++;
+		tot ++;
+		descr = descr->next;
+	} while (descr != start);
+
+	dev_info(dev, "Last %d descrs with stat=0x%08x "
+	         "for a total of %d descrs\n", cnt, cstat, tot);
+
+#ifdef DEBUG
+	/* Now dump the whole ring */
+	descr = start;
+	do
+	{
+		struct spider_net_hw_descr *hwd = descr->hwdescr;
+		status = spider_net_get_descr_status(hwd);
+		cnt = descr - chain->ring;
+		dev_info(dev, "Descr %d stat=0x%08x skb=%p\n",
+		         cnt, status, descr->skb);
+		dev_info(dev, "bus addr=%08x buf addr=%08x sz=%d\n",
+		         descr->bus_addr, hwd->buf_addr, hwd->buf_size);
+		dev_info(dev, "next=%08x result sz=%d valid sz=%d\n",
+		         hwd->next_descr_addr, hwd->result_size,
+		         hwd->valid_size);
+		dev_info(dev, "dmac=%08x data stat=%08x data err=%08x\n",
+		         hwd->dmac_cmd_status, hwd->data_status,
+		         hwd->data_error);
+		dev_info(dev, "\n");
+
 		descr = descr->next;
 	} while (descr != start);
-	printk(KERN_INFO "Last %d descrs with stat=x%08x\n", cnt, cstat);
-}
 #endif
 
+}
+
 /**
  * spider_net_resync_head_ptr - Advance head ptr past empty descrs
  *
@@ -1127,6 +1187,7 @@ spider_net_decode_one_descr(struct spider_net_card *card)
 	struct spider_net_descr_chain *chain = &card->rx_chain;
 	struct spider_net_descr *descr = chain->tail;
 	struct spider_net_hw_descr *hwdescr = descr->hwdescr;
+	u32 hw_buf_addr;
 	int status;
 
 	status = spider_net_get_descr_status(hwdescr);
@@ -1140,15 +1201,17 @@ spider_net_decode_one_descr(struct spider_net_card *card)
 	chain->tail = descr->next;
 
 	/* unmap descriptor */
-	pci_unmap_single(card->pdev, hwdescr->buf_addr,
+	hw_buf_addr = hwdescr->buf_addr;
+	hwdescr->buf_addr = 0xffffffff;
+	pci_unmap_single(card->pdev, hw_buf_addr,
 			SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
 
 	if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
 	     (status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
 	     (status == SPIDER_NET_DESCR_FORCE_END) ) {
 		if (netif_msg_rx_err(card))
-			pr_err("%s: dropping RX descriptor with state %d\n",
-			       card->netdev->name, status);
+			dev_err(&card->netdev->dev,
+			       "dropping RX descriptor with state %d\n", status);
 		card->netdev_stats.rx_dropped++;
 		goto bad_desc;
 	}
@@ -1156,8 +1219,8 @@ spider_net_decode_one_descr(struct spider_net_card *card)
 	if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
 	     (status != SPIDER_NET_DESCR_FRAME_END) ) {
 		if (netif_msg_rx_err(card))
-			pr_err("%s: RX descriptor with unknown state %d\n",
-			       card->netdev->name, status);
+			dev_err(&card->netdev->dev,
+			       "RX descriptor with unknown state %d\n", status);
 		card->spider_stats.rx_desc_unk_state++;
 		goto bad_desc;
 	}
@@ -1165,18 +1228,17 @@ spider_net_decode_one_descr(struct spider_net_card *card)
 	/* The cases we'll throw away the packet immediately */
 	if (hwdescr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
 		if (netif_msg_rx_err(card))
-			pr_err("%s: error in received descriptor found, "
+			dev_err(&card->netdev->dev,
+			       "error in received descriptor found, "
 			       "data_status=x%08x, data_error=x%08x\n",
-			       card->netdev->name,
 			       hwdescr->data_status, hwdescr->data_error);
 		goto bad_desc;
 	}
 
-	if (hwdescr->dmac_cmd_status & 0xfcf4) {
-		pr_err("%s: bad status, cmd_status=x%08x\n",
-			       card->netdev->name,
+	if (hwdescr->dmac_cmd_status & SPIDER_NET_DESCR_BAD_STATUS) {
+		dev_err(&card->netdev->dev, "bad status, cmd_status=x%08x\n",
 			       hwdescr->dmac_cmd_status);
-		pr_err("buf_addr=x%08x\n", hwdescr->buf_addr);
+		pr_err("buf_addr=x%08x\n", hw_buf_addr);
 		pr_err("buf_size=x%08x\n", hwdescr->buf_size);
 		pr_err("next_descr_addr=x%08x\n", hwdescr->next_descr_addr);
 		pr_err("result_size=x%08x\n", hwdescr->result_size);
@@ -1196,6 +1258,8 @@ spider_net_decode_one_descr(struct spider_net_card *card)
 	return 1;
 
 bad_desc:
+	if (netif_msg_rx_err(card))
+		show_rx_chain(card);
 	dev_kfree_skb_irq(descr->skb);
 	descr->skb = NULL;
 	hwdescr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
@@ -1221,7 +1285,6 @@ spider_net_poll(struct net_device *netdev, int *budget)
 	int packets_to_do, packets_done = 0;
 	int no_more_packets = 0;
 
-	spider_net_cleanup_tx_ring(card);
 	packets_to_do = min(*budget, netdev->quota);
 
 	while (packets_to_do) {
@@ -1246,6 +1309,8 @@ spider_net_poll(struct net_device *netdev, int *budget)
 	spider_net_refill_rx_chain(card);
 	spider_net_enable_rxdmac(card);
 
+	spider_net_cleanup_tx_ring(card);
+
 	/* if all packets are in the stack, enable interrupts and return 0 */
 	/* if not, return 1 */
 	if (no_more_packets) {
@@ -1376,11 +1441,17 @@ static void
 spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
 {
 	u32 error_reg1, error_reg2;
+	u32 mask_reg1, mask_reg2;
 	u32 i;
 	int show_error = 1;
 
 	error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS);
 	error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS);
+	mask_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1MSK);
+	mask_reg2 = spider_net_read_reg(card,SPIDER_NET_GHIINT2MSK);
+
+	error_reg1 &= mask_reg1;
+	error_reg2 &= mask_reg2;
 
 	/* check GHIINT0STS ************************************/
 	if (status_reg)
@@ -1415,7 +1486,7 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
 	case SPIDER_NET_GPWFFINT:
 		/* PHY command queue full */
 		if (netif_msg_intr(card))
-			pr_err("PHY write queue full\n");
+			dev_err(&card->netdev->dev, "PHY write queue full\n");
 		show_error = 0;
 		break;
 
@@ -1582,9 +1653,8 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg)
 	}
 
 	if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
-		pr_err("Got error interrupt on %s, GHIINT0STS = 0x%08x, "
+		dev_err(&card->netdev->dev, "Error interrupt, GHIINT0STS = 0x%08x, "
 		       "GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
-		       card->netdev->name,
 		       status_reg, error_reg1, error_reg2);
 
 	/* clear interrupt sources */
@@ -1609,9 +1679,11 @@ spider_net_interrupt(int irq, void *ptr)
 {
 	struct net_device *netdev = ptr;
 	struct spider_net_card *card = netdev_priv(netdev);
-	u32 status_reg;
+	u32 status_reg, mask_reg;
 
 	status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS);
+	mask_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK);
+	status_reg &= mask_reg;
 
 	if (!status_reg)
 		return IRQ_NONE;
@@ -1653,6 +1725,38 @@ spider_net_poll_controller(struct net_device *netdev)
 #endif /* CONFIG_NET_POLL_CONTROLLER */
 
 /**
+ * spider_net_enable_interrupts - enable interrupts
+ * @card: card structure
+ *
+ * spider_net_enable_interrupt enables several interrupts
+ */
+static void 
+spider_net_enable_interrupts(struct spider_net_card *card)
+{
+	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
+			     SPIDER_NET_INT0_MASK_VALUE);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
+			     SPIDER_NET_INT1_MASK_VALUE);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
+			     SPIDER_NET_INT2_MASK_VALUE);
+}
+
+/**
+ * spider_net_disable_interrupts - disable interrupts
+ * @card: card structure
+ *
+ * spider_net_disable_interrupts disables all the interrupts
+ */
+static void 
+spider_net_disable_interrupts(struct spider_net_card *card)
+{
+	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
+	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
+	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
+}
+
+/**
  * spider_net_init_card - initializes the card
  * @card: card structure
  *
@@ -1672,6 +1776,7 @@ spider_net_init_card(struct spider_net_card *card)
 	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
 		spider_net_read_reg(card, SPIDER_NET_GMACOPEMD) | 0x4);
 
+	spider_net_disable_interrupts(card);
 }
 
 /**
@@ -1759,14 +1864,6 @@ spider_net_enable_card(struct spider_net_card *card)
 	spider_net_write_reg(card, SPIDER_NET_GMACOPEMD,
 			     SPIDER_NET_OPMODE_VALUE);
 
-	/* set interrupt mask registers */
-	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK,
-			     SPIDER_NET_INT0_MASK_VALUE);
-	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK,
-			     SPIDER_NET_INT1_MASK_VALUE);
-	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK,
-			     SPIDER_NET_INT2_MASK_VALUE);
-
 	spider_net_write_reg(card, SPIDER_NET_GDTDMACCNTR,
 			     SPIDER_NET_GDTBSTA);
 }
@@ -1849,7 +1946,8 @@ spider_net_init_firmware(struct spider_net_card *card)
 			     SPIDER_NET_FIRMWARE_NAME, &card->pdev->dev) == 0) {
 		if ( (firmware->size != SPIDER_NET_FIRMWARE_LEN) &&
 		     netif_msg_probe(card) ) {
-			pr_err("Incorrect size of spidernet firmware in " \
+			dev_err(&card->netdev->dev,
+			       "Incorrect size of spidernet firmware in " \
 			       "filesystem. Looking in host firmware...\n");
 			goto try_host_fw;
 		}
@@ -1873,8 +1971,8 @@ try_host_fw:
 
 	if ( (fw_size != SPIDER_NET_FIRMWARE_LEN) &&
 	     netif_msg_probe(card) ) {
-		pr_err("Incorrect size of spidernet firmware in " \
-		       "host firmware\n");
+		dev_err(&card->netdev->dev,
+		       "Incorrect size of spidernet firmware in host firmware\n");
 		goto done;
 	}
 
@@ -1884,7 +1982,8 @@ done:
 	return err;
 out_err:
 	if (netif_msg_probe(card))
-		pr_err("Couldn't find spidernet firmware in filesystem " \
+		dev_err(&card->netdev->dev,
+		       "Couldn't find spidernet firmware in filesystem " \
 		       "or host firmware\n");
 	return err;
 }
@@ -1941,6 +2040,8 @@ spider_net_open(struct net_device *netdev)
 	netif_carrier_on(netdev);
 	netif_poll_enable(netdev);
 
+	spider_net_enable_interrupts(card);
+
 	return 0;
 
 register_int_failed:
@@ -2113,11 +2214,7 @@ spider_net_stop(struct net_device *netdev)
 	del_timer_sync(&card->tx_timer);
 	del_timer_sync(&card->aneg_timer);
 
-	/* disable/mask all interrupts */
-	spider_net_write_reg(card, SPIDER_NET_GHIINT0MSK, 0);
-	spider_net_write_reg(card, SPIDER_NET_GHIINT1MSK, 0);
-	spider_net_write_reg(card, SPIDER_NET_GHIINT2MSK, 0);
-	spider_net_write_reg(card, SPIDER_NET_GMACINTEN, 0);
+	spider_net_disable_interrupts(card);
 
 	free_irq(netdev->irq, netdev);
 
@@ -2279,13 +2376,14 @@ spider_net_setup_netdev(struct spider_net_card *card)
 
 	result = spider_net_set_mac(netdev, &addr);
 	if ((result) && (netif_msg_probe(card)))
-		pr_err("Failed to set MAC address: %i\n", result);
+		dev_err(&card->netdev->dev,
+		        "Failed to set MAC address: %i\n", result);
 
 	result = register_netdev(netdev);
 	if (result) {
 		if (netif_msg_probe(card))
-			pr_err("Couldn't register net_device: %i\n",
-				  result);
+			dev_err(&card->netdev->dev,
+			        "Couldn't register net_device: %i\n", result);
 		return result;
 	}
 
@@ -2363,17 +2461,19 @@ spider_net_setup_pci_dev(struct pci_dev *pdev)
 	unsigned long mmio_start, mmio_len;
 
 	if (pci_enable_device(pdev)) {
-		pr_err("Couldn't enable PCI device\n");
+		dev_err(&pdev->dev, "Couldn't enable PCI device\n");
 		return NULL;
 	}
 
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		pr_err("Couldn't find proper PCI device base address.\n");
+		dev_err(&pdev->dev,
+		        "Couldn't find proper PCI device base address.\n");
 		goto out_disable_dev;
 	}
 
 	if (pci_request_regions(pdev, spider_net_driver_name)) {
-		pr_err("Couldn't obtain PCI resources, aborting.\n");
+		dev_err(&pdev->dev,
+		        "Couldn't obtain PCI resources, aborting.\n");
 		goto out_disable_dev;
 	}
 
@@ -2381,8 +2481,8 @@ spider_net_setup_pci_dev(struct pci_dev *pdev)
 
 	card = spider_net_alloc_card();
 	if (!card) {
-		pr_err("Couldn't allocate net_device structure, "
-			  "aborting.\n");
+		dev_err(&pdev->dev,
+		        "Couldn't allocate net_device structure, aborting.\n");
 		goto out_release_regions;
 	}
 	card->pdev = pdev;
@@ -2396,7 +2496,8 @@ spider_net_setup_pci_dev(struct pci_dev *pdev)
 	card->regs = ioremap(mmio_start, mmio_len);
 
 	if (!card->regs) {
-		pr_err("Couldn't obtain PCI resources, aborting.\n");
+		dev_err(&pdev->dev,
+		        "Couldn't obtain PCI resources, aborting.\n");
 		goto out_release_regions;
 	}
 
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 1d054aa71504..dbbdb8cee3c6 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -349,11 +349,23 @@ enum spider_net_int2_status {
 #define SPIDER_NET_GPRDAT_MASK			0x0000ffff
 
 #define SPIDER_NET_DMAC_NOINTR_COMPLETE		0x00800000
-#define SPIDER_NET_DMAC_NOCS			0x00040000
+#define SPIDER_NET_DMAC_TXFRMTL		0x00040000
 #define SPIDER_NET_DMAC_TCP			0x00020000
 #define SPIDER_NET_DMAC_UDP			0x00030000
 #define SPIDER_NET_TXDCEST			0x08000000
 
+#define SPIDER_NET_DESCR_RXFDIS        0x00000001
+#define SPIDER_NET_DESCR_RXDCEIS       0x00000002
+#define SPIDER_NET_DESCR_RXDEN0IS      0x00000004
+#define SPIDER_NET_DESCR_RXINVDIS      0x00000008
+#define SPIDER_NET_DESCR_RXRERRIS      0x00000010
+#define SPIDER_NET_DESCR_RXFDCIMS      0x00000100
+#define SPIDER_NET_DESCR_RXDCEIMS      0x00000200
+#define SPIDER_NET_DESCR_RXDEN0IMS     0x00000400
+#define SPIDER_NET_DESCR_RXINVDIMS     0x00000800
+#define SPIDER_NET_DESCR_RXRERRMIS     0x00001000
+#define SPIDER_NET_DESCR_UNUSED        0x077fe0e0
+
 #define SPIDER_NET_DESCR_IND_PROC_MASK		0xF0000000
 #define SPIDER_NET_DESCR_COMPLETE		0x00000000 /* used in rx and tx */
 #define SPIDER_NET_DESCR_RESPONSE_ERROR		0x10000000 /* used in rx and tx */
@@ -364,6 +376,13 @@ enum spider_net_int2_status {
 #define SPIDER_NET_DESCR_NOT_IN_USE		0xF0000000
 #define SPIDER_NET_DESCR_TXDESFLG		0x00800000
 
+#define SPIDER_NET_DESCR_BAD_STATUS   (SPIDER_NET_DESCR_RXDEN0IS | \
+                                       SPIDER_NET_DESCR_RXRERRIS | \
+                                       SPIDER_NET_DESCR_RXDEN0IMS | \
+                                       SPIDER_NET_DESCR_RXINVDIMS | \
+                                       SPIDER_NET_DESCR_RXRERRMIS | \
+                                       SPIDER_NET_DESCR_UNUSED)
+
 /* Descriptor, as defined by the hardware */
 struct spider_net_hw_descr {
 	u32 buf_addr;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 786d4b9c07ec..8b6478663a56 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -740,7 +740,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev,
 	pci_set_master(pdev);
 
 	/* enable MWI -- it vastly improves Rx performance on sparc64 */
-	pci_set_mwi(pdev);
+	pci_try_set_mwi(pdev);
 
 #ifdef ZEROCOPY
 	/* Starfire can do TCP/UDP checksumming */
@@ -1456,7 +1456,7 @@ static int __netdev_rx(struct net_device *dev, int *quota)
 			pci_dma_sync_single_for_cpu(np->pci_dev,
 						    np->rx_info[entry].mapping,
 						    pkt_len, PCI_DMA_FROMDEVICE);
-			eth_copy_and_sum(skb, np->rx_info[entry].skb->data, pkt_len, 0);
+			skb_copy_to_linear_data(skb, np->rx_info[entry].skb->data, pkt_len);
 			pci_dma_sync_single_for_device(np->pci_dev,
 						       np->rx_info[entry].mapping,
 						       pkt_len, PCI_DMA_FROMDEVICE);
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index a123ea87893b..b77ab6e8fd35 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -777,7 +777,7 @@ static void sun3_82586_rcv_int(struct net_device *dev)
 					{
 						skb_reserve(skb,2);
 						skb_put(skb,totlen);
-						eth_copy_and_sum(skb,(char *) p->base+swab32((unsigned long) rbd->buffer),totlen,0);
+						skb_copy_to_linear_data(skb,(char *) p->base+swab32((unsigned long) rbd->buffer),totlen);
 						skb->protocol=eth_type_trans(skb,dev);
 						netif_rx(skb);
 						p->stats.rx_packets++;
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
index 791e081fdc15..f1548c033327 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/sun3lance.c
@@ -853,10 +853,9 @@ static int lance_rx( struct net_device *dev )
 
 				skb_reserve( skb, 2 );	/* 16 byte align */
 				skb_put( skb, pkt_len );	/* Make room */
-//			        skb_copy_to_linear_data(skb, PKTBUF_ADDR(head), pkt_len);
-				eth_copy_and_sum(skb,
+				skb_copy_to_linear_data(skb,
 						 PKTBUF_ADDR(head),
-						 pkt_len, 0);
+						 pkt_len);
 
 				skb->protocol = eth_type_trans( skb, dev );
 				netif_rx( skb );
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index 2ad8d58dee3b..b3e0158def4f 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -860,7 +860,7 @@ static void bigmac_rx(struct bigmac *bp)
 			sbus_dma_sync_single_for_cpu(bp->bigmac_sdev,
 						     this->rx_addr, len,
 						     SBUS_DMA_FROMDEVICE);
-			eth_copy_and_sum(copy_skb, (unsigned char *)skb->data, len, 0);
+			skb_copy_to_linear_data(copy_skb, (unsigned char *)skb->data, len);
 			sbus_dma_sync_single_for_device(bp->bigmac_sdev,
 							this->rx_addr, len,
 							SBUS_DMA_FROMDEVICE);
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index e1f912d04043..af0c9831074c 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -397,7 +397,6 @@ struct netdev_private {
 	unsigned char phys[MII_CNT];		/* MII device addresses, only first one used. */
 	struct pci_dev *pci_dev;
 	void __iomem *base;
-	unsigned char pci_rev_id;
 };
 
 /* The station address location in the EEPROM. */
@@ -544,8 +543,6 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 	dev->change_mtu = &change_mtu;
 	pci_set_drvdata(pdev, dev);
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
-
 	i = register_netdev(dev);
 	if (i)
 		goto err_out_unmap_rx;
@@ -828,7 +825,7 @@ static int netdev_open(struct net_device *dev)
 	iowrite8(100, ioaddr + RxDMAPollPeriod);
 	iowrite8(127, ioaddr + TxDMAPollPeriod);
 	/* Fix DFE-580TX packet drop issue */
-	if (np->pci_rev_id >= 0x14)
+	if (np->pci_dev->revision >= 0x14)
 		iowrite8(0x01, ioaddr + DebugCtrl1);
 	netif_start_queue(dev);
 
@@ -1194,7 +1191,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance)
 			hw_frame_id = ioread8(ioaddr + TxFrameId);
 		}
 
-		if (np->pci_rev_id >= 0x14) {
+		if (np->pci_dev->revision >= 0x14) {
 			spin_lock(&np->lock);
 			for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
 				int entry = np->dirty_tx % TX_RING_SIZE;
@@ -1313,7 +1310,7 @@ static void rx_poll(unsigned long data)
 							    np->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
 
-				eth_copy_and_sum(skb, np->rx_skbuff[entry]->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
 				pci_dma_sync_single_for_device(np->pci_dev,
 							       desc->frag[0].addr,
 							       np->rx_buf_sz,
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 51c3fe2108a3..8b35f13318ea 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2625,7 +2625,7 @@ static void quattro_sbus_free_irqs(void)
 #endif /* CONFIG_SBUS */
 
 #ifdef CONFIG_PCI
-static struct quattro * __init quattro_pci_find(struct pci_dev *pdev)
+static struct quattro * __devinit quattro_pci_find(struct pci_dev *pdev)
 {
 	struct pci_dev *bdev = pdev->bus->self;
 	struct quattro *qp;
@@ -3095,12 +3095,8 @@ static int __devinit happy_meal_pci_probe(struct pci_dev *pdev,
 
 #ifdef CONFIG_SPARC
 	hp->hm_revision = of_getintprop_default(dp, "hm-rev", 0xff);
-	if (hp->hm_revision == 0xff) {
-		unsigned char prev;
-
-		pci_read_config_byte(pdev, PCI_REVISION_ID, &prev);
-		hp->hm_revision = 0xc0 | (prev & 0x0f);
-	}
+	if (hp->hm_revision == 0xff)
+		hp->hm_revision = 0xc0 | (pdev->revision & 0x0f);
 #else
 	/* works with this on non-sparc hosts */
 	hp->hm_revision = 0x20;
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 42722530ab24..053b7cb0d944 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -549,9 +549,9 @@ static void lance_rx_dvma(struct net_device *dev)
 
 			skb_reserve(skb, 2);		/* 16 byte align */
 			skb_put(skb, len);		/* make room */
-			eth_copy_and_sum(skb,
+			skb_copy_to_linear_data(skb,
 					 (unsigned char *)&(ib->rx_buf [entry][0]),
-					 len, 0);
+					 len);
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_rx(skb);
 			dev->last_rx = jiffies;
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index fa70e0b78af7..1b65ae8a1c7c 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -439,8 +439,8 @@ static void qe_rx(struct sunqe *qep)
 			} else {
 				skb_reserve(skb, 2);
 				skb_put(skb, len);
-				eth_copy_and_sum(skb, (unsigned char *) this_qbuf,
-						 len, 0);
+				skb_copy_to_linear_data(skb, (unsigned char *) this_qbuf,
+						 len);
 				skb->protocol = eth_type_trans(skb, qep->dev);
 				netif_rx(skb);
 				qep->dev->last_rx = jiffies;
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 463d600ed83d..75655add3f34 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -23,9 +23,9 @@
  */
 
 #ifdef TC35815_NAPI
-#define DRV_VERSION	"1.35-NAPI"
+#define DRV_VERSION	"1.36-NAPI"
 #else
-#define DRV_VERSION	"1.35"
+#define DRV_VERSION	"1.36"
 #endif
 static const char *version = "tc35815.c:v" DRV_VERSION "\n";
 #define MODNAME			"tc35815"
@@ -49,6 +49,7 @@ static const char *version = "tc35815.c:v" DRV_VERSION "\n";
 #include <linux/pci.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -597,13 +598,46 @@ static int tc_mdio_read(struct net_device *dev, int phy_id, int location);
 static void tc_mdio_write(struct net_device *dev, int phy_id, int location,
 			  int val);
 
-static void __devinit tc35815_init_dev_addr (struct net_device *dev)
+#ifdef CONFIG_CPU_TX49XX
+/*
+ * Find a platform_device providing a MAC address.  The platform code
+ * should provide a "tc35815-mac" device with a MAC address in its
+ * platform_data.
+ */
+static int __devinit tc35815_mac_match(struct device *dev, void *data)
+{
+	struct platform_device *plat_dev = to_platform_device(dev);
+	struct pci_dev *pci_dev = data;
+	unsigned int id = (pci_dev->bus->number << 8) | pci_dev->devfn;
+	return !strcmp(plat_dev->name, "tc35815-mac") && plat_dev->id == id;
+}
+
+static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
+{
+	struct tc35815_local *lp = dev->priv;
+	struct device *pd = bus_find_device(&platform_bus_type, NULL,
+					    lp->pci_dev, tc35815_mac_match);
+	if (pd) {
+		if (pd->platform_data)
+			memcpy(dev->dev_addr, pd->platform_data, ETH_ALEN);
+		put_device(pd);
+		return is_valid_ether_addr(dev->dev_addr) ? 0 : -ENODEV;
+	}
+	return -ENODEV;
+}
+#else
+static int __devinit tc35815_read_plat_dev_addr(struct device *dev)
+{
+	return -ENODEV;
+}
+#endif
+
+static int __devinit tc35815_init_dev_addr (struct net_device *dev)
 {
 	struct tc35815_regs __iomem *tr =
 		(struct tc35815_regs __iomem *)dev->base_addr;
 	int i;
 
-	/* dev_addr will be overwritten on NETDEV_REGISTER event */
 	while (tc_readl(&tr->PROM_Ctl) & PROM_Busy)
 		;
 	for (i = 0; i < 6; i += 2) {
@@ -615,6 +649,9 @@ static void __devinit tc35815_init_dev_addr (struct net_device *dev)
 		dev->dev_addr[i] = data & 0xff;
 		dev->dev_addr[i+1] = data >> 8;
 	}
+	if (!is_valid_ether_addr(dev->dev_addr))
+		return tc35815_read_plat_dev_addr(dev);
+	return 0;
 }
 
 static int __devinit tc35815_init_one (struct pci_dev *pdev,
@@ -724,7 +761,10 @@ static int __devinit tc35815_init_one (struct pci_dev *pdev,
 	tc35815_chip_reset(dev);
 
 	/* Retrieve the ethernet address. */
-	tc35815_init_dev_addr(dev);
+	if (tc35815_init_dev_addr(dev)) {
+		dev_warn(&pdev->dev, "not valid ether addr\n");
+		random_ether_addr(dev->dev_addr);
+	}
 
 	rc = register_netdev (dev);
 	if (rc)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 2f3184184ad9..32e4037dcb50 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.77"
-#define DRV_MODULE_RELDATE	"May 31, 2007"
+#define DRV_MODULE_VERSION	"3.78"
+#define DRV_MODULE_RELDATE	"July 11, 2007"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -721,6 +721,44 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
 	return ret;
 }
 
+static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
+{
+	u32 phy;
+
+	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+	    (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
+		return;
+
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+		u32 ephy;
+
+		if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &ephy)) {
+			tg3_writephy(tp, MII_TG3_EPHY_TEST,
+				     ephy | MII_TG3_EPHY_SHADOW_EN);
+			if (!tg3_readphy(tp, MII_TG3_EPHYTST_MISCCTRL, &phy)) {
+				if (enable)
+					phy |= MII_TG3_EPHYTST_MISCCTRL_MDIX;
+				else
+					phy &= ~MII_TG3_EPHYTST_MISCCTRL_MDIX;
+				tg3_writephy(tp, MII_TG3_EPHYTST_MISCCTRL, phy);
+			}
+			tg3_writephy(tp, MII_TG3_EPHY_TEST, ephy);
+		}
+	} else {
+		phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
+		      MII_TG3_AUXCTL_SHDWSEL_MISC;
+		if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, phy) &&
+		    !tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy)) {
+			if (enable)
+				phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
+			else
+				phy &= ~MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
+			phy |= MII_TG3_AUXCTL_MISC_WREN;
+			tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+		}
+	}
+}
+
 static void tg3_phy_set_wirespeed(struct tg3 *tp)
 {
 	u32 val;
@@ -1045,23 +1083,11 @@ out:
 	}
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-		u32 phy_reg;
-
 		/* adjust output voltage */
 		tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
-
-		if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phy_reg)) {
-			u32 phy_reg2;
-
-			tg3_writephy(tp, MII_TG3_EPHY_TEST,
-				     phy_reg | MII_TG3_EPHY_SHADOW_EN);
-			/* Enable auto-MDIX */
-			if (!tg3_readphy(tp, 0x10, &phy_reg2))
-				tg3_writephy(tp, 0x10, phy_reg2 | 0x4000);
-			tg3_writephy(tp, MII_TG3_EPHY_TEST, phy_reg);
-		}
 	}
 
+	tg3_phy_toggle_automdix(tp, 1);
 	tg3_phy_set_wirespeed(tp);
 	return 0;
 }
@@ -1162,6 +1188,19 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 	}
 }
 
+static int tg3_5700_link_polarity(struct tg3 *tp, u32 speed)
+{
+	if (tp->led_ctrl == LED_CTRL_MODE_PHY_2)
+		return 1;
+	else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411) {
+		if (speed != SPEED_10)
+			return 1;
+	} else if (speed == SPEED_10)
+		return 1;
+
+	return 0;
+}
+
 static int tg3_setup_phy(struct tg3 *, int);
 
 #define RESET_KIND_SHUTDOWN	0
@@ -1320,9 +1359,17 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 			else
 				mac_mode = MAC_MODE_PORT_MODE_MII;
 
-			if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 ||
-			    !(tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB))
-				mac_mode |= MAC_MODE_LINK_POLARITY;
+			mac_mode |= tp->mac_mode & MAC_MODE_LINK_POLARITY;
+			if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
+			    ASIC_REV_5700) {
+				u32 speed = (tp->tg3_flags &
+					     TG3_FLAG_WOL_SPEED_100MB) ?
+					     SPEED_100 : SPEED_10;
+				if (tg3_5700_link_polarity(tp, speed))
+					mac_mode |= MAC_MODE_LINK_POLARITY;
+				else
+					mac_mode &= ~MAC_MODE_LINK_POLARITY;
+			}
 		} else {
 			mac_mode = MAC_MODE_PORT_MODE_TBI;
 		}
@@ -1990,15 +2037,12 @@ relink:
 	if (tp->link_config.active_duplex == DUPLEX_HALF)
 		tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
 
-	tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
-		if ((tp->led_ctrl == LED_CTRL_MODE_PHY_2) ||
-		    (current_link_up == 1 &&
-		     tp->link_config.active_speed == SPEED_10))
-			tp->mac_mode |= MAC_MODE_LINK_POLARITY;
-	} else {
-		if (current_link_up == 1)
+		if (current_link_up == 1 &&
+		    tg3_5700_link_polarity(tp, tp->link_config.active_speed))
 			tp->mac_mode |= MAC_MODE_LINK_POLARITY;
+		else
+			tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
 	}
 
 	/* ??? Without this setting Netgear GA302T PHY does not
@@ -2639,6 +2683,9 @@ static int tg3_setup_fiber_by_hand(struct tg3 *tp, u32 mac_status)
 
 		tw32_f(MAC_MODE, (tp->mac_mode | MAC_MODE_SEND_CONFIGS));
 		udelay(40);
+
+		tw32_f(MAC_MODE, tp->mac_mode);
+		udelay(40);
 	}
 
 out:
@@ -2698,10 +2745,6 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
 	else
 		current_link_up = tg3_setup_fiber_by_hand(tp, mac_status);
 
-	tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
-	tw32_f(MAC_MODE, tp->mac_mode);
-	udelay(40);
-
 	tp->hw_status->status =
 		(SD_STATUS_UPDATED |
 		 (tp->hw_status->status & ~SD_STATUS_LINK_CHG));
@@ -3512,9 +3555,9 @@ static inline int tg3_irq_sync(struct tg3 *tp)
  */
 static inline void tg3_full_lock(struct tg3 *tp, int irq_sync)
 {
+	spin_lock_bh(&tp->lock);
 	if (irq_sync)
 		tg3_irq_quiesce(tp);
-	spin_lock_bh(&tp->lock);
 }
 
 static inline void tg3_full_unlock(struct tg3 *tp)
@@ -6444,6 +6487,10 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 
 	tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
 		MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
+	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+	    !(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
+		tp->mac_mode |= MAC_MODE_LINK_POLARITY;
 	tw32_f(MAC_MODE, tp->mac_mode | MAC_MODE_RXSTAT_CLEAR | MAC_MODE_TXSTAT_CLEAR);
 	udelay(40);
 
@@ -8805,7 +8852,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 			return 0;
 
 		mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
-			   MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY;
+			   MAC_MODE_PORT_INT_LPBACK;
+		if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+			mac_mode |= MAC_MODE_LINK_POLARITY;
 		if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
 			mac_mode |= MAC_MODE_PORT_MODE_MII;
 		else
@@ -8824,19 +8873,18 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 					     phytest | MII_TG3_EPHY_SHADOW_EN);
 				if (!tg3_readphy(tp, 0x1b, &phy))
 					tg3_writephy(tp, 0x1b, phy & ~0x20);
-				if (!tg3_readphy(tp, 0x10, &phy))
-					tg3_writephy(tp, 0x10, phy & ~0x4000);
 				tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest);
 			}
 			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
 		} else
 			val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
 
+		tg3_phy_toggle_automdix(tp, 0);
+
 		tg3_writephy(tp, MII_BMCR, val);
 		udelay(40);
 
-		mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
-			   MAC_MODE_LINK_POLARITY;
+		mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
 			tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x1800);
 			mac_mode |= MAC_MODE_PORT_MODE_MII;
@@ -8849,8 +8897,11 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 			udelay(10);
 			tw32_f(MAC_RX_MODE, tp->rx_mode);
 		}
-		if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
-			mac_mode &= ~MAC_MODE_LINK_POLARITY;
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
+			if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)
+				mac_mode &= ~MAC_MODE_LINK_POLARITY;
+			else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411)
+				mac_mode |= MAC_MODE_LINK_POLARITY;
 			tg3_writephy(tp, MII_TG3_EXT_CTRL,
 				     MII_TG3_EXT_CTRL_LNK3_LED_MODE);
 		}
@@ -9116,10 +9167,10 @@ static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
 	/* Update RX_MODE_KEEP_VLAN_TAG bit in RX_MODE register. */
 	__tg3_set_rx_mode(dev);
 
-	tg3_full_unlock(tp);
-
 	if (netif_running(dev))
 		tg3_netif_start(tp);
+
+	tg3_full_unlock(tp);
 }
 #endif
 
@@ -9410,11 +9461,13 @@ static void __devinit tg3_get_5755_nvram_info(struct tg3 *tp)
 		case FLASH_5755VENDOR_ATMEL_FLASH_1:
 		case FLASH_5755VENDOR_ATMEL_FLASH_2:
 		case FLASH_5755VENDOR_ATMEL_FLASH_3:
+		case FLASH_5755VENDOR_ATMEL_FLASH_5:
 			tp->nvram_jedecnum = JEDEC_ATMEL;
 			tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
 			tp->tg3_flags2 |= TG3_FLG2_FLASH;
 			tp->nvram_pagesize = 264;
-			if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1)
+			if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1 ||
+			    nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_5)
 				tp->nvram_size = (protect ? 0x3e200 : 0x80000);
 			else if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_2)
 				tp->nvram_size = (protect ? 0x1f200 : 0x40000);
@@ -10498,11 +10551,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 				continue;
 			}
 			if (pci_id->rev != PCI_ANY_ID) {
-				u8 rev;
-
-				pci_read_config_byte(bridge, PCI_REVISION_ID,
-						     &rev);
-				if (rev > pci_id->rev)
+				if (bridge->revision > pci_id->rev)
 					continue;
 			}
 			if (bridge->subordinate &&
@@ -11944,12 +11993,11 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	 * checksumming.
 	 */
 	if ((tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) == 0) {
+		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
-			dev->features |= NETIF_F_HW_CSUM;
-		else
-			dev->features |= NETIF_F_IP_CSUM;
-		dev->features |= NETIF_F_SG;
+			dev->features |= NETIF_F_IPV6_CSUM;
+
 		tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
 	} else
 		tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index bd9f4f428e5b..d84e75e7365d 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1467,6 +1467,7 @@
 #define  FLASH_5755VENDOR_ATMEL_FLASH_2	 0x03400002
 #define  FLASH_5755VENDOR_ATMEL_FLASH_3	 0x03400000
 #define  FLASH_5755VENDOR_ATMEL_FLASH_4	 0x00000003
+#define  FLASH_5755VENDOR_ATMEL_FLASH_5	 0x02000003
 #define  FLASH_5755VENDOR_ATMEL_EEPROM_64KHZ	 0x03c00003
 #define  FLASH_5755VENDOR_ATMEL_EEPROM_376KHZ	 0x03c00002
 #define  FLASH_5787VENDOR_ATMEL_EEPROM_64KHZ	 0x03000003
@@ -1642,6 +1643,11 @@
 
 #define MII_TG3_AUX_CTRL		0x18 /* auxilliary control register */
 
+#define MII_TG3_AUXCTL_MISC_WREN	0x8000
+#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX	0x0200
+#define MII_TG3_AUXCTL_MISC_RDSEL_MISC	0x7000
+#define MII_TG3_AUXCTL_SHDWSEL_MISC		0x0007
+
 #define MII_TG3_AUX_STAT		0x19 /* auxilliary status register */
 #define MII_TG3_AUX_STAT_LPASS		0x0004
 #define MII_TG3_AUX_STAT_SPDMASK	0x0700
@@ -1667,6 +1673,9 @@
 #define MII_TG3_EPHY_TEST		0x1f /* 5906 PHY register */
 #define MII_TG3_EPHY_SHADOW_EN		0x80
 
+#define MII_TG3_EPHYTST_MISCCTRL	0x10 /* 5906 EPHY misc ctrl shadow register */
+#define MII_TG3_EPHYTST_MISCCTRL_MDIX	0x4000
+
 #define MII_TG3_TEST1			0x1e
 #define MII_TG3_TEST1_TRIM_EN		0x0010
 #define MII_TG3_TEST1_CRC_EN		0x8000
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 106dc1ef0acb..74eb12107e68 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -533,7 +533,6 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 
 	struct net_device  *dev;
 	TLanPrivateInfo    *priv;
-	u8		   pci_rev;
 	u16		   device_id;
 	int		   reg, rc = -ENODEV;
 
@@ -577,8 +576,6 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 			goto err_out_free_dev;
 		}
 
-		pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev);
-
 		for ( reg= 0; reg <= 5; reg ++ ) {
 			if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
 				pci_io_base = pci_resource_start(pdev, reg);
@@ -595,7 +592,7 @@ static int __devinit TLan_probe1(struct pci_dev *pdev,
 
 		dev->base_addr = pci_io_base;
 		dev->irq = pdev->irq;
-		priv->adapterRev = pci_rev;
+		priv->adapterRev = pdev->revision;
 		pci_set_master(pdev);
 		pci_set_drvdata(pdev, dev);
 
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index e22a3f5333ef..9f1b6ab9c228 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -363,7 +363,7 @@ static int __devinit xl_probe(struct pci_dev *pdev,
 }
 
 
-static int __init xl_init(struct net_device *dev) 
+static int __devinit xl_init(struct net_device *dev) 
 {
     	struct xl_private *xl_priv = (struct xl_private *)dev->priv ;
 
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index 8c9634a98c11..1c537d5a3062 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -2,17 +2,17 @@
 # Tulip family network device configuration
 #
 
-menu "Tulip family network device support"
-	depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
-
-config NET_TULIP
+menuconfig NET_TULIP
 	bool "\"Tulip\" family network device support"
+	depends on PCI || EISA || CARDBUS
 	help
 	  This selects the "Tulip" family of EISA/PCI network cards.
 
+if NET_TULIP
+
 config DE2104X
 	tristate "Early DECchip Tulip (dc2104x) PCI support (EXPERIMENTAL)"
-	depends on NET_TULIP && PCI && EXPERIMENTAL
+	depends on PCI && EXPERIMENTAL
 	select CRC32
 	---help---
 	  This driver is developed for the SMC EtherPower series Ethernet
@@ -30,7 +30,7 @@ config DE2104X
 
 config TULIP
 	tristate "DECchip Tulip (dc2114x) PCI support"
-	depends on NET_TULIP && PCI
+	depends on PCI
 	select CRC32
 	---help---
 	  This driver is developed for the SMC EtherPower series Ethernet
@@ -95,7 +95,7 @@ config TULIP_NAPI_HW_MITIGATION
 
 config DE4X5
 	tristate "Generic DECchip & DIGITAL EtherWORKS PCI/EISA"
-	depends on NET_TULIP && (PCI || EISA)
+	depends on PCI || EISA
 	select CRC32
 	---help---
 	  This is support for the DIGITAL series of PCI/EISA Ethernet cards.
@@ -112,7 +112,7 @@ config DE4X5
 
 config WINBOND_840
 	tristate "Winbond W89c840 Ethernet support"
-	depends on NET_TULIP && PCI
+	depends on PCI
 	select CRC32
 	select MII
 	help
@@ -123,7 +123,7 @@ config WINBOND_840
 
 config DM9102
 	tristate "Davicom DM910x/DM980x support"
-	depends on NET_TULIP && PCI
+	depends on PCI
 	select CRC32
 	---help---
 	  This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
@@ -137,7 +137,7 @@ config DM9102
 
 config ULI526X
 	tristate "ULi M526x controller support"
-	depends on NET_TULIP && PCI
+	depends on PCI
 	select CRC32
 	---help---
 	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
@@ -149,7 +149,7 @@ config ULI526X
 	  
 config PCMCIA_XIRCOM
 	tristate "Xircom CardBus support (new driver)"
-	depends on NET_TULIP && CARDBUS
+	depends on CARDBUS
 	---help---
 	  This driver is for the Digital "Tulip" Ethernet CardBus adapters.
 	  It should work with most DEC 21*4*-based chips/ethercards, as well
@@ -162,7 +162,7 @@ config PCMCIA_XIRCOM
 
 config PCMCIA_XIRTULIP
 	tristate "Xircom Tulip-like CardBus support (old driver)"
-	depends on NET_TULIP && CARDBUS && BROKEN_ON_SMP
+	depends on CARDBUS && BROKEN_ON_SMP
 	select CRC32
 	---help---
 	  This driver is for the Digital "Tulip" Ethernet CardBus adapters.
@@ -174,5 +174,4 @@ config PCMCIA_XIRTULIP
 	  <file:Documentation/networking/net-modules.txt>.  The module will
 	  be called xircom_tulip_cb.  If unsure, say N.
 
-endmenu
-
+endif # NET_TULIP
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 861729806dc1..d380e0b3f05a 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -785,7 +785,6 @@ static void __de_set_rx_mode (struct net_device *dev)
 
 	de->tx_head = NEXT_TX(entry);
 
-	BUG_ON(TX_BUFFS_AVAIL(de) < 0);
 	if (TX_BUFFS_AVAIL(de) == 0)
 		netif_stop_queue(dev);
 
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 62143f92c231..09902891a6e6 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -597,7 +597,7 @@ static char *args;
 #endif
 
 struct parameters {
-    int fdx;
+    bool fdx;
     int autosense;
 };
 
@@ -809,10 +809,10 @@ struct de4x5_private {
     s32  irq_en;                            /* Summary interrupt bits       */
     int  media;                             /* Media (eg TP), mode (eg 100B)*/
     int  c_media;                           /* Remember the last media conn */
-    int  fdx;                               /* media full duplex flag       */
+    bool fdx;                               /* media full duplex flag       */
     int  linkOK;                            /* Link is OK                   */
     int  autosense;                         /* Allow/disallow autosensing   */
-    int  tx_enable;                         /* Enable descriptor polling    */
+    bool tx_enable;                         /* Enable descriptor polling    */
     int  setup_f;                           /* Setup frame filtering type   */
     int  local_state;                       /* State within a 'media' state */
     struct mii_phy phy[DE4X5_MAX_PHY];      /* List of attached PHY devices */
@@ -838,8 +838,8 @@ struct de4x5_private {
     struct de4x5_srom srom;                 /* A copy of the SROM           */
     int cfrv;				    /* Card CFRV copy */
     int rx_ovf;                             /* Check for 'RX overflow' tag  */
-    int useSROM;                            /* For non-DEC card use SROM    */
-    int useMII;                             /* Infoblock using the MII      */
+    bool useSROM;                           /* For non-DEC card use SROM    */
+    bool useMII;                            /* Infoblock using the MII      */
     int asBitValid;                         /* Autosense bits in GEP?       */
     int asPolarity;                         /* 0 => asserted high           */
     int asBit;                              /* Autosense bit number in GEP  */
@@ -928,7 +928,7 @@ static int     dc21040_state(struct net_device *dev, int csr13, int csr14, int c
 static int     test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec);
 static int     test_for_100Mb(struct net_device *dev, int msec);
 static int     wait_for_link(struct net_device *dev);
-static int     test_mii_reg(struct net_device *dev, int reg, int mask, int pol, long msec);
+static int     test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec);
 static int     is_spd_100(struct net_device *dev);
 static int     is_100_up(struct net_device *dev);
 static int     is_10_up(struct net_device *dev);
@@ -1109,7 +1109,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
     /*
     ** Now find out what kind of DC21040/DC21041/DC21140 board we have.
     */
-    lp->useSROM = FALSE;
+    lp->useSROM = false;
     if (lp->bus == PCI) {
 	PCI_signature(name, lp);
     } else {
@@ -1137,7 +1137,7 @@ de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev)
 	lp->cache.gepc = GEP_INIT;
 	lp->asBit = GEP_SLNK;
 	lp->asPolarity = GEP_SLNK;
-	lp->asBitValid = TRUE;
+	lp->asBitValid = ~0;
 	lp->timeout = -1;
 	lp->gendev = gendev;
 	spin_lock_init(&lp->lock);
@@ -1463,7 +1463,7 @@ de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev)
     u_long flags = 0;
 
     netif_stop_queue(dev);
-    if (lp->tx_enable == NO) {                   /* Cannot send for now */
+    if (!lp->tx_enable) {                   /* Cannot send for now */
 	return -1;
     }
 
@@ -2134,7 +2134,7 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
     u_short vendor, status;
     u_int irq = 0, device;
     u_long iobase = 0;                     /* Clear upper 32 bits in Alphas */
-    int i, j, cfrv;
+    int i, j;
     struct de4x5_private *lp = netdev_priv(dev);
     struct list_head *walk;
 
@@ -2150,7 +2150,6 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
 
 	/* Get the chip configuration revision register */
 	pb = this_dev->bus->number;
-	pci_read_config_dword(this_dev, PCI_REVISION_ID, &cfrv);
 
 	/* Set the device number information */
 	lp->device = PCI_SLOT(this_dev->devfn);
@@ -2158,7 +2157,8 @@ srom_search(struct net_device *dev, struct pci_dev *pdev)
 
 	/* Set the chipset information */
 	if (is_DC2114x) {
-	    device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+	    device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
+		      ? DC21142 : DC21143);
 	}
 	lp->chipset = device;
 
@@ -2254,7 +2254,7 @@ static int __devinit de4x5_pci_probe (struct pci_dev *pdev,
 	}
 
 	/* Get the chip configuration revision register */
-	pci_read_config_dword(pdev, PCI_REVISION_ID, &lp->cfrv);
+	lp->cfrv = pdev->revision;
 
 	/* Set the device number information */
 	lp->device = dev_num;
@@ -2424,7 +2424,7 @@ dc21040_autoconf(struct net_device *dev)
     switch (lp->media) {
     case INIT:
 	DISABLE_IRQs;
-	lp->tx_enable = NO;
+	lp->tx_enable = false;
 	lp->timeout = -1;
 	de4x5_save_skbs(dev);
 	if ((lp->autosense == AUTO) || (lp->autosense == TP)) {
@@ -2477,7 +2477,7 @@ dc21040_autoconf(struct net_device *dev)
 	    lp->c_media = lp->media;
 	}
 	lp->media = INIT;
-	lp->tx_enable = NO;
+	lp->tx_enable = false;
 	break;
     }
 
@@ -2578,7 +2578,7 @@ dc21041_autoconf(struct net_device *dev)
     switch (lp->media) {
     case INIT:
 	DISABLE_IRQs;
-	lp->tx_enable = NO;
+	lp->tx_enable = false;
 	lp->timeout = -1;
 	de4x5_save_skbs(dev);          /* Save non transmitted skb's */
 	if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) {
@@ -2757,7 +2757,7 @@ dc21041_autoconf(struct net_device *dev)
 	    lp->c_media = lp->media;
 	}
 	lp->media = INIT;
-	lp->tx_enable = NO;
+	lp->tx_enable = false;
 	break;
     }
 
@@ -2781,7 +2781,7 @@ dc21140m_autoconf(struct net_device *dev)
     case INIT:
         if (lp->timeout < 0) {
 	    DISABLE_IRQs;
-	    lp->tx_enable = FALSE;
+	    lp->tx_enable = false;
 	    lp->linkOK = 0;
 	    de4x5_save_skbs(dev);          /* Save non transmitted skb's */
 	}
@@ -2830,7 +2830,7 @@ dc21140m_autoconf(struct net_device *dev)
 	    if (lp->timeout < 0) {
 		mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
 	    }
-	    cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, FALSE, 500);
+	    cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
 	    if (cr < 0) {
 		next_tick = cr & ~TIMER_CB;
 	    } else {
@@ -2845,7 +2845,7 @@ dc21140m_autoconf(struct net_device *dev)
 	    break;
 
 	case 1:
-	    if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) {
+	    if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000)) < 0) {
 		next_tick = sr & ~TIMER_CB;
 	    } else {
 		lp->media = SPD_DET;
@@ -2857,10 +2857,10 @@ dc21140m_autoconf(struct net_device *dev)
 		    if (!(anlpa & MII_ANLPA_RF) &&
 			 (cap = anlpa & MII_ANLPA_TAF & ana)) {
 			if (cap & MII_ANA_100M) {
-			    lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE);
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
 			    lp->media = _100Mb;
 			} else if (cap & MII_ANA_10M) {
-			    lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) ? TRUE : FALSE);
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
 
 			    lp->media = _10Mb;
 			}
@@ -2932,7 +2932,7 @@ dc21140m_autoconf(struct net_device *dev)
 	    lp->c_media = lp->media;
 	}
 	lp->media = INIT;
-	lp->tx_enable = FALSE;
+	lp->tx_enable = false;
 	break;
     }
 
@@ -2965,7 +2965,7 @@ dc2114x_autoconf(struct net_device *dev)
     case INIT:
         if (lp->timeout < 0) {
 	    DISABLE_IRQs;
-	    lp->tx_enable = FALSE;
+	    lp->tx_enable = false;
 	    lp->linkOK = 0;
             lp->timeout = -1;
 	    de4x5_save_skbs(dev);            /* Save non transmitted skb's */
@@ -3013,7 +3013,7 @@ dc2114x_autoconf(struct net_device *dev)
 	    if (lp->timeout < 0) {
 		mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII);
 	    }
-	    cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, FALSE, 500);
+	    cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, false, 500);
 	    if (cr < 0) {
 		next_tick = cr & ~TIMER_CB;
 	    } else {
@@ -3028,7 +3028,8 @@ dc2114x_autoconf(struct net_device *dev)
 	    break;
 
 	case 1:
-	    if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) {
+	    sr = test_mii_reg(dev, MII_SR, MII_SR_ASSC, true, 2000);
+	    if (sr < 0) {
 		next_tick = sr & ~TIMER_CB;
 	    } else {
 		lp->media = SPD_DET;
@@ -3040,10 +3041,10 @@ dc2114x_autoconf(struct net_device *dev)
 		    if (!(anlpa & MII_ANLPA_RF) &&
 			 (cap = anlpa & MII_ANLPA_TAF & ana)) {
 			if (cap & MII_ANA_100M) {
-			    lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE);
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) != 0;
 			    lp->media = _100Mb;
 			} else if (cap & MII_ANA_10M) {
-			    lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) ? TRUE : FALSE);
+			    lp->fdx = (ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) != 0;
 			    lp->media = _10Mb;
 			}
 		    }
@@ -3222,14 +3223,14 @@ srom_map_media(struct net_device *dev)
 {
     struct de4x5_private *lp = netdev_priv(dev);
 
-    lp->fdx = 0;
+    lp->fdx = false;
     if (lp->infoblock_media == lp->media)
       return 0;
 
     switch(lp->infoblock_media) {
       case SROM_10BASETF:
 	if (!lp->params.fdx) return -1;
-	lp->fdx = TRUE;
+	lp->fdx = true;
       case SROM_10BASET:
 	if (lp->params.fdx && !lp->fdx) return -1;
 	if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) {
@@ -3249,7 +3250,7 @@ srom_map_media(struct net_device *dev)
 
       case SROM_100BASETF:
         if (!lp->params.fdx) return -1;
-	lp->fdx = TRUE;
+	lp->fdx = true;
       case SROM_100BASET:
 	if (lp->params.fdx && !lp->fdx) return -1;
 	lp->media = _100Mb;
@@ -3261,7 +3262,7 @@ srom_map_media(struct net_device *dev)
 
       case SROM_100BASEFF:
 	if (!lp->params.fdx) return -1;
-	lp->fdx = TRUE;
+	lp->fdx = true;
       case SROM_100BASEF:
 	if (lp->params.fdx && !lp->fdx) return -1;
 	lp->media = _100Mb;
@@ -3297,7 +3298,7 @@ de4x5_init_connection(struct net_device *dev)
     spin_lock_irqsave(&lp->lock, flags);
     de4x5_rst_desc_ring(dev);
     de4x5_setup_intr(dev);
-    lp->tx_enable = YES;
+    lp->tx_enable = true;
     spin_unlock_irqrestore(&lp->lock, flags);
     outl(POLL_DEMAND, DE4X5_TPD);
 
@@ -3336,7 +3337,7 @@ de4x5_reset_phy(struct net_device *dev)
             }
         }
 	if (lp->useMII) {
-	    next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, FALSE, 500);
+	    next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, false, 500);
 	}
     } else if (lp->chipset == DC21140) {
 	PHY_HARD_RESET;
@@ -3466,7 +3467,7 @@ wait_for_link(struct net_device *dev)
 **
 */
 static int
-test_mii_reg(struct net_device *dev, int reg, int mask, int pol, long msec)
+test_mii_reg(struct net_device *dev, int reg, int mask, bool pol, long msec)
 {
     struct de4x5_private *lp = netdev_priv(dev);
     int test;
@@ -3476,9 +3477,8 @@ test_mii_reg(struct net_device *dev, int reg, int mask, int pol, long msec)
 	lp->timeout = msec/100;
     }
 
-    if (pol) pol = ~0;
     reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask;
-    test = (reg ^ pol) & mask;
+    test = (reg ^ (pol ? ~0 : 0)) & mask;
 
     if (test && --lp->timeout) {
 	reg = 100 | TIMER_CB;
@@ -3992,10 +3992,10 @@ PCI_signature(char *name, struct de4x5_private *lp)
 			     )))))));
 	}
 	if (lp->chipset != DC21041) {
-	    lp->useSROM = TRUE;             /* card is not recognisably DEC */
+	    lp->useSROM = true;             /* card is not recognisably DEC */
 	}
     } else if ((lp->chipset & ~0x00ff) == DC2114x) {
-	lp->useSROM = TRUE;
+	lp->useSROM = true;
     }
 
     return status;
@@ -4216,7 +4216,7 @@ srom_repair(struct net_device *dev, int card)
 	memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom));
 	memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN);
 	memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100);
-	lp->useSROM = TRUE;
+	lp->useSROM = true;
 	break;
     }
 
@@ -4392,7 +4392,7 @@ srom_infoleaf_info(struct net_device *dev)
 	if (lp->chipset == infoleaf_array[i].chipset) break;
     }
     if (i == INFOLEAF_SIZE) {
-	lp->useSROM = FALSE;
+	lp->useSROM = false;
 	printk("%s: Cannot find correct chipset for SROM decoding!\n",
 	                                                          dev->name);
 	return -ENXIO;
@@ -4409,7 +4409,7 @@ srom_infoleaf_info(struct net_device *dev)
 	    if (lp->device == *p) break;
 	}
 	if (i == 0) {
-	    lp->useSROM = FALSE;
+	    lp->useSROM = false;
 	    printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n",
 	                                               dev->name, lp->device);
 	    return -ENXIO;
@@ -4542,7 +4542,7 @@ dc21140_infoleaf(struct net_device *dev)
 	}
 	lp->media = INIT;
 	lp->tcount = 0;
-	lp->tx_enable = FALSE;
+	lp->tx_enable = false;
     }
 
     return next_tick & ~TIMER_CB;
@@ -4577,7 +4577,7 @@ dc21142_infoleaf(struct net_device *dev)
 	}
 	lp->media = INIT;
 	lp->tcount = 0;
-	lp->tx_enable = FALSE;
+	lp->tx_enable = false;
     }
 
     return next_tick & ~TIMER_CB;
@@ -4611,7 +4611,7 @@ dc21143_infoleaf(struct net_device *dev)
 	}
 	lp->media = INIT;
 	lp->tcount = 0;
-	lp->tx_enable = FALSE;
+	lp->tx_enable = false;
     }
 
     return next_tick & ~TIMER_CB;
@@ -4650,7 +4650,7 @@ compact_infoblock(struct net_device *dev, u_char count, u_char *p)
 	lp->asBit = 1 << ((csr6 >> 1) & 0x07);
 	lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
 	lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
-	lp->useMII = FALSE;
+	lp->useMII = false;
 
 	de4x5_switch_mac_port(dev);
     }
@@ -4691,7 +4691,7 @@ type0_infoblock(struct net_device *dev, u_char count, u_char *p)
 	lp->asBit = 1 << ((csr6 >> 1) & 0x07);
 	lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
 	lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
-	lp->useMII = FALSE;
+	lp->useMII = false;
 
 	de4x5_switch_mac_port(dev);
     }
@@ -4731,7 +4731,7 @@ type1_infoblock(struct net_device *dev, u_char count, u_char *p)
         lp->ibn = 1;
         lp->active = *p;
 	lp->infoblock_csr6 = OMR_MII_100;
-	lp->useMII = TRUE;
+	lp->useMII = true;
 	lp->infoblock_media = ANS;
 
 	de4x5_switch_mac_port(dev);
@@ -4773,7 +4773,7 @@ type2_infoblock(struct net_device *dev, u_char count, u_char *p)
         lp->cache.gepc = ((s32)(TWIDDLE(p)) << 16); p += 2;
         lp->cache.gep  = ((s32)(TWIDDLE(p)) << 16);
 	lp->infoblock_csr6 = OMR_SIA;
-	lp->useMII = FALSE;
+	lp->useMII = false;
 
 	de4x5_switch_mac_port(dev);
     }
@@ -4814,7 +4814,7 @@ type3_infoblock(struct net_device *dev, u_char count, u_char *p)
 	lp->active = *p;
 	if (MOTO_SROM_BUG) lp->active = 0;
 	lp->infoblock_csr6 = OMR_MII_100;
-	lp->useMII = TRUE;
+	lp->useMII = true;
 	lp->infoblock_media = ANS;
 
 	de4x5_switch_mac_port(dev);
@@ -4856,7 +4856,7 @@ type4_infoblock(struct net_device *dev, u_char count, u_char *p)
 	lp->asBit = 1 << ((csr6 >> 1) & 0x07);
 	lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit;
 	lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18);
-	lp->useMII = FALSE;
+	lp->useMII = false;
 
 	de4x5_switch_mac_port(dev);
     }
@@ -5077,7 +5077,7 @@ mii_get_phy(struct net_device *dev)
     int id;
 
     lp->active = 0;
-    lp->useMII = TRUE;
+    lp->useMII = true;
 
     /* Search the MII address space for possible PHY devices */
     for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) {
@@ -5127,7 +5127,7 @@ mii_get_phy(struct net_device *dev)
 	    de4x5_dbg_mii(dev, k);
 	}
     }
-    if (!lp->mii_cnt) lp->useMII = FALSE;
+    if (!lp->mii_cnt) lp->useMII = false;
 
     return lp->mii_cnt;
 }
diff --git a/drivers/net/tulip/de4x5.h b/drivers/net/tulip/de4x5.h
index 57226e5eb8a6..12af0cc037fb 100644
--- a/drivers/net/tulip/de4x5.h
+++ b/drivers/net/tulip/de4x5.h
@@ -893,15 +893,6 @@
 #define PHYS_ADDR_ONLY       1     /* Update the physical address only */
 
 /*
-** Booleans
-*/
-#define NO                   0
-#define FALSE                0
-
-#define YES                  ~0
-#define TRUE                 ~0
-
-/*
 ** Adapter state
 */
 #define INITIALISED          0     /* After h/w initialised and mem alloc'd */
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 4ed67ff0e81e..dab74feb44bc 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -181,11 +181,12 @@
 	udelay(5);
 
 #define __CHK_IO_SIZE(pci_id, dev_rev) \
- (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
 	DM9102A_IO_SIZE: DM9102_IO_SIZE)
 
-#define CHK_IO_SIZE(pci_dev, dev_rev) \
-	(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
+#define CHK_IO_SIZE(pci_dev) \
+	(__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
+	(pci_dev)->revision))
 
 /* Sten Check */
 #define DEVICE net_device
@@ -205,7 +206,7 @@ struct rx_desc {
 
 struct dmfe_board_info {
 	u32 chip_id;			/* Chip vendor/Device ID */
-	u32 chip_revision;		/* Chip revision */
+	u8 chip_revision;		/* Chip revision */
 	struct DEVICE *next_dev;	/* next device */
 	struct pci_dev *pdev;		/* PCI device */
 	spinlock_t lock;
@@ -359,7 +360,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 {
 	struct dmfe_board_info *db;	/* board information structure */
 	struct net_device *dev;
-	u32 dev_rev, pci_pmr;
+	u32 pci_pmr;
 	int i, err;
 
 	DMFE_DBUG(0, "dmfe_init_one()", 0);
@@ -392,10 +393,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 		goto err_out_disable;
 	}
 
-	/* Read Chip revision */
-	pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
-
-	if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
+	if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
 		printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
 		err = -ENODEV;
 		goto err_out_disable;
@@ -433,7 +431,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 
 	db->chip_id = ent->driver_data;
 	db->ioaddr = pci_resource_start(pdev, 0);
-	db->chip_revision = dev_rev;
+	db->chip_revision = pdev->revision;
 	db->wol_mode = 0;
 
 	db->pdev = pdev;
@@ -455,7 +453,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 
 	pci_read_config_dword(pdev, 0x50, &pci_pmr);
 	pci_pmr &= 0x70000;
-	if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) )
+	if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
 		db->chip_type = 1;	/* DM9102A E3 */
 	else
 		db->chip_type = 0;
@@ -553,7 +551,7 @@ static int dmfe_open(struct DEVICE *dev)
 
 	/* CR6 operation mode decision */
 	if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
-		(db->chip_revision >= 0x02000030) ) {
+		(db->chip_revision >= 0x30) ) {
     		db->cr6_data |= DMFE_TXTH_256;
 		db->cr0_data = CR0_DEFAULT;
 		db->dm910x_chk_mode=4;		/* Enter the normal mode */
@@ -1199,9 +1197,9 @@ static void dmfe_timer(unsigned long data)
 		tmp_cr12 = inb(db->ioaddr + DCR12);	/* DM9102/DM9102A */
 
 	if ( ((db->chip_id == PCI_DM9102_ID) &&
-		(db->chip_revision == 0x02000030)) ||
+		(db->chip_revision == 0x30)) ||
 		((db->chip_id == PCI_DM9132_ID) &&
-		(db->chip_revision == 0x02000010)) ) {
+		(db->chip_revision == 0x10)) ) {
 		/* DM9102A Chip */
 		if (tmp_cr12 & 2)
 			link_ok = 0;
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index ea896777bcaf..53efd6694e75 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -197,8 +197,8 @@ int tulip_poll(struct net_device *dev, int *budget)
 								   tp->rx_buffers[entry].mapping,
 								   pkt_len, PCI_DMA_FROMDEVICE);
 #if ! defined(__alpha__)
-                                       eth_copy_and_sum(skb, tp->rx_buffers[entry].skb->data,
-                                                        pkt_len, 0);
+                                       skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
+                                                        pkt_len);
                                        skb_put(skb, pkt_len);
 #else
                                        memcpy(skb_put(skb, pkt_len),
@@ -420,8 +420,8 @@ static int tulip_rx(struct net_device *dev)
 							    tp->rx_buffers[entry].mapping,
 							    pkt_len, PCI_DMA_FROMDEVICE);
 #if ! defined(__alpha__)
-				eth_copy_and_sum(skb, tp->rx_buffers[entry].skb->data,
-						 pkt_len, 0);
+				skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
+						 pkt_len);
 				skb_put(skb, pkt_len);
 #else
 				memcpy(skb_put(skb, pkt_len),
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 041af63f2811..7dcd138b0fed 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1155,7 +1155,7 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev,
 	/* set or disable MWI in the standard PCI command bit.
 	 * Check for the case where  mwi is desired but not available
 	 */
-	if (csr0 & MWI)	pci_set_mwi(pdev);
+	if (csr0 & MWI)	pci_try_set_mwi(pdev);
 	else		pci_clear_mwi(pdev);
 
 	/* read result from hardware (in case bit refused to enable) */
@@ -1238,7 +1238,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	};
 	static int last_irq;
 	static int multiport_cnt;	/* For four-port boards w/one EEPROM */
-	u8 chip_rev;
 	int i, irq;
 	unsigned short sum;
 	unsigned char *ee_data;
@@ -1274,10 +1273,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 
 	if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
 	{
-		u32 dev_rev;
 		/* Read Chip revision */
-		pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
-		if(dev_rev < 0x02000030)
+		if (pdev->revision < 0x02000030)
 		{
 			printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
 			return -ENODEV;
@@ -1360,8 +1357,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	if (!ioaddr)
 		goto err_out_free_res;
 
-	pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
-
 	/*
 	 * initialize private data structure 'tp'
 	 * it is zeroed and aligned in alloc_etherdev
@@ -1382,7 +1377,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	tp->flags = tulip_tbl[chip_idx].flags;
 	tp->pdev = pdev;
 	tp->base_addr = ioaddr;
-	tp->revision = chip_rev;
+	tp->revision = pdev->revision;
 	tp->csr0 = csr0;
 	spin_lock_init(&tp->lock);
 	spin_lock_init(&tp->mii_lock);
@@ -1399,7 +1394,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 		tulip_mwi_config (pdev, dev);
 #else
 	/* MWI is broken for DC21143 rev 65... */
-	if (chip_idx == DC21143 && chip_rev == 65)
+	if (chip_idx == DC21143 && pdev->revision == 65)
 		tp->csr0 &= ~MWI;
 #endif
 
@@ -1640,7 +1635,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 #else
 		"Port"
 #endif
-		" %#llx,", dev->name, chip_name, chip_rev,
+		" %#llx,", dev->name, chip_name, pdev->revision,
 		(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
 	pci_set_drvdata(pdev, dev);
 
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index 38f3b99716b8..5824f6a35495 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -1232,7 +1232,7 @@ static int netdev_rx(struct net_device *dev)
 				pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
 							    np->rx_skbuff[entry]->len,
 							    PCI_DMA_FROMDEVICE);
-				eth_copy_and_sum(skb, np->rx_skbuff[entry]->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
 				skb_put(skb, pkt_len);
 				pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry],
 							       np->rx_skbuff[entry]->len,
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 2470b1ee33c0..16a54e6b8d4f 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -205,7 +205,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 {
 	struct net_device *dev = NULL;
 	struct xircom_private *private;
-	unsigned char chip_rev;
 	unsigned long flags;
 	unsigned short tmp16;
 	enter("xircom_probe");
@@ -224,8 +223,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 	pci_read_config_word (pdev,PCI_STATUS, &tmp16);
 	pci_write_config_word (pdev, PCI_STATUS,tmp16);
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
-
 	if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
 		printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
 		return -ENODEV;
@@ -286,7 +283,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
 		goto reg_fail;
 	}
 
-	printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
+	printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
 	/* start the transmitter to get a heartbeat */
 	/* TODO: send 2 dummy packets here */
 	transceiver_voodoo(private);
@@ -1208,7 +1205,7 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri
 				goto out;
 			}
 			skb_reserve(skb, 2);
-			eth_copy_and_sum(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len, 0);
+			skb_copy_to_linear_data(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len);
 			skb_put(skb, pkt_len);
 			skb->protocol = eth_type_trans(skb, dev);
 			netif_rx(skb);
diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index f64172927377..fc439f333350 100644
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -524,7 +524,6 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
 	int chip_idx = id->driver_data;
 	long ioaddr;
 	int i;
-	u8 chip_rev;
 
 /* when built into the kernel, we only print version if device is found */
 #ifndef MODULE
@@ -620,9 +619,8 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
 	if (register_netdev(dev))
 		goto err_out_cleardev;
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
 	printk(KERN_INFO "%s: %s rev %d at %#3lx,",
-	       dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr);
+	       dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr);
 	for (i = 0; i < 6; i++)
 		printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
 	printk(", IRQ %d.\n", dev->irq);
@@ -1242,8 +1240,8 @@ xircom_rx(struct net_device *dev)
 				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 #if ! defined(__alpha__)
-				eth_copy_and_sum(skb, bus_to_virt(tp->rx_ring[entry].buffer1),
-								 pkt_len, 0);
+				skb_copy_to_linear_data(skb, bus_to_virt(tp->rx_ring[entry].buffer1),
+								 pkt_len);
 				skb_put(skb, pkt_len);
 #else
 				memcpy(skb_put(skb, pkt_len),
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index a2c6caaaae93..62b2b3005019 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -432,6 +432,7 @@ static void tun_setup(struct net_device *dev)
 	init_waitqueue_head(&tun->read_wait);
 
 	tun->owner = -1;
+	tun->group = -1;
 
 	SET_MODULE_OWNER(dev);
 	dev->open = tun_net_open;
@@ -467,8 +468,11 @@ static int tun_set_iff(struct file *file, struct ifreq *ifr)
 			return -EBUSY;
 
 		/* Check permissions */
-		if (tun->owner != -1 &&
-		    current->euid != tun->owner && !capable(CAP_NET_ADMIN))
+		if (((tun->owner != -1 &&
+		      current->euid != tun->owner) ||
+		     (tun->group != -1 &&
+		      current->egid != tun->group)) &&
+		     !capable(CAP_NET_ADMIN))
 			return -EPERM;
 	}
 	else if (__dev_get_by_name(ifr->ifr_name))
@@ -610,6 +614,13 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 		DBG(KERN_INFO "%s: owner set to %d\n", tun->dev->name, tun->owner);
 		break;
 
+	case TUNSETGROUP:
+		/* Set group of the device */
+		tun->group= (gid_t) arg;
+
+		DBG(KERN_INFO "%s: group set to %d\n", tun->dev->name, tun->group);
+		break;
+
 	case TUNSETLINK:
 		/* Only allow setting the type when the interface is down */
 		if (tun->dev->flags & IFF_UP) {
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 15b2fb8aa492..03587205546e 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -1703,7 +1703,7 @@ typhoon_rx(struct typhoon *tp, struct basic_ring *rxRing, volatile u32 * ready,
 			pci_dma_sync_single_for_cpu(tp->pdev, dma_addr,
 						    PKT_BUF_SZ,
 						    PCI_DMA_FROMDEVICE);
-			eth_copy_and_sum(new_skb, skb->data, pkt_len, 0);
+			skb_copy_to_linear_data(new_skb, skb->data, pkt_len);
 			pci_dma_sync_single_for_device(tp->pdev, dma_addr,
 						       PKT_BUF_SZ,
 						       PCI_DMA_FROMDEVICE);
@@ -2267,12 +2267,6 @@ need_resume:
 	typhoon_resume(pdev);
 	return -EBUSY;
 }
-
-static int
-typhoon_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
-	return pci_enable_wake(pdev, state, enable);
-}
 #endif
 
 static int __devinit
@@ -2636,7 +2630,6 @@ static struct pci_driver typhoon_driver = {
 #ifdef CONFIG_PM
 	.suspend	= typhoon_suspend,
 	.resume		= typhoon_resume,
-	.enable_wake	= typhoon_enable_wake,
 #endif
 };
 
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 18b731bb4da1..e4736a3b1b7a 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2276,7 +2276,7 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 	phy_stop(phydev);
 
 	/* Mask all interrupts */
-	out_be32(ugeth->uccf->p_ucce, 0x00000000);
+	out_be32(ugeth->uccf->p_uccm, 0x00000000);
 
 	/* Clear all interrupts */
 	out_be32(ugeth->uccf->p_ucce, 0xffffffff);
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 86e90c59d551..76752d84a30f 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -255,7 +255,7 @@ static void catc_rx_done(struct urb *urb)
 		if (!(skb = dev_alloc_skb(pkt_len)))
 			return;
 
-		eth_copy_and_sum(skb, pkt_start + pkt_offset, pkt_len, 0);
+		skb_copy_to_linear_data(skb, pkt_start + pkt_offset, pkt_len);
 		skb_put(skb, pkt_len);
 
 		skb->protocol = eth_type_trans(skb, catc->netdev);
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 60d29440f316..524dc5f5e46d 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -635,7 +635,7 @@ static void kaweth_usb_receive(struct urb *urb)
 
 		skb_reserve(skb, 2);    /* Align IP on 16 byte boundaries */
 
-		eth_copy_and_sum(skb, kaweth->rx_buf + 2, pkt_len, 0);
+		skb_copy_to_linear_data(skb, kaweth->rx_buf + 2, pkt_len);
 
 		skb_put(skb, pkt_len);
 
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index a12f576391cf..37bf4f2c0a44 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -192,7 +192,7 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf)
 				usb_pipeendpoint(pipe), maxp, period);
 		}
 	}
-	return  0;
+	return 0;
 }
 
 /* Passes this packet up the stack, updating its accounting.
@@ -326,7 +326,7 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 	if (netif_running (dev->net)
 			&& netif_device_present (dev->net)
 			&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
-		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
+		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
 		case -EPIPE:
 			usbnet_defer_kevent (dev, EVENT_RX_HALT);
 			break;
@@ -393,8 +393,8 @@ static void rx_complete (struct urb *urb)
 	entry->urb = NULL;
 
 	switch (urb_status) {
-	    // success
-	    case 0:
+	/* success */
+	case 0:
 		if (skb->len < dev->net->hard_header_len) {
 			entry->state = rx_cleanup;
 			dev->stats.rx_errors++;
@@ -404,28 +404,30 @@ static void rx_complete (struct urb *urb)
 		}
 		break;
 
-	    // stalls need manual reset. this is rare ... except that
-	    // when going through USB 2.0 TTs, unplug appears this way.
-	    // we avoid the highspeed version of the ETIMEOUT/EILSEQ
-	    // storm, recovering as needed.
-	    case -EPIPE:
+	/* stalls need manual reset. this is rare ... except that
+	 * when going through USB 2.0 TTs, unplug appears this way.
+	 * we avoid the highspeed version of the ETIMEOUT/EILSEQ
+	 * storm, recovering as needed.
+	 */
+	case -EPIPE:
 		dev->stats.rx_errors++;
 		usbnet_defer_kevent (dev, EVENT_RX_HALT);
 		// FALLTHROUGH
 
-	    // software-driven interface shutdown
-	    case -ECONNRESET:		// async unlink
-	    case -ESHUTDOWN:		// hardware gone
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* async unlink */
+	case -ESHUTDOWN:		/* hardware gone */
 		if (netif_msg_ifdown (dev))
 			devdbg (dev, "rx shutdown, code %d", urb_status);
 		goto block;
 
-	    // we get controller i/o faults during khubd disconnect() delays.
-	    // throttle down resubmits, to avoid log floods; just temporarily,
-	    // so we still recover when the fault isn't a khubd delay.
-	    case -EPROTO:
-	    case -ETIME:
-	    case -EILSEQ:
+	/* we get controller i/o faults during khubd disconnect() delays.
+	 * throttle down resubmits, to avoid log floods; just temporarily,
+	 * so we still recover when the fault isn't a khubd delay.
+	 */
+	case -EPROTO:
+	case -ETIME:
+	case -EILSEQ:
 		dev->stats.rx_errors++;
 		if (!timer_pending (&dev->delay)) {
 			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
@@ -438,12 +440,12 @@ block:
 		urb = NULL;
 		break;
 
-	    // data overrun ... flush fifo?
-	    case -EOVERFLOW:
+	/* data overrun ... flush fifo? */
+	case -EOVERFLOW:
 		dev->stats.rx_over_errors++;
 		// FALLTHROUGH
 
-	    default:
+	default:
 		entry->state = rx_cleanup;
 		dev->stats.rx_errors++;
 		if (netif_msg_rx_err (dev))
@@ -471,22 +473,22 @@ static void intr_complete (struct urb *urb)
 	int		status = urb->status;
 
 	switch (status) {
-	    /* success */
-	    case 0:
+	/* success */
+	case 0:
 		dev->driver_info->status(dev, urb);
 		break;
 
-	    /* software-driven interface shutdown */
-	    case -ENOENT:		// urb killed
-	    case -ESHUTDOWN:		// hardware gone
+	/* software-driven interface shutdown */
+	case -ENOENT:		/* urb killed */
+	case -ESHUTDOWN:	/* hardware gone */
 		if (netif_msg_ifdown (dev))
 			devdbg (dev, "intr shutdown, code %d", status);
 		return;
 
-	    /* NOTE:  not throttling like RX/TX, since this endpoint
-	     * already polls infrequently
-	     */
-	    default:
+	/* NOTE:  not throttling like RX/TX, since this endpoint
+	 * already polls infrequently
+	 */
+	default:
 		devdbg (dev, "intr status %d", status);
 		break;
 	}
@@ -569,9 +571,9 @@ static int usbnet_stop (struct net_device *net)
 	temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq);
 
 	// maybe wait for deletions to finish.
-	while (!skb_queue_empty(&dev->rxq) &&
-	       !skb_queue_empty(&dev->txq) &&
-	       !skb_queue_empty(&dev->done)) {
+	while (!skb_queue_empty(&dev->rxq)
+			&& !skb_queue_empty(&dev->txq)
+			&& !skb_queue_empty(&dev->done)) {
 		msleep(UNLINK_TIMEOUT_MS);
 		if (netif_msg_ifdown (dev))
 			devdbg (dev, "waited for %d urb completions", temp);
@@ -1011,16 +1013,16 @@ static void usbnet_bh (unsigned long param)
 	while ((skb = skb_dequeue (&dev->done))) {
 		entry = (struct skb_data *) skb->cb;
 		switch (entry->state) {
-		    case rx_done:
+		case rx_done:
 			entry->state = rx_cleanup;
 			rx_process (dev, skb);
 			continue;
-		    case tx_done:
-		    case rx_cleanup:
+		case tx_done:
+		case rx_cleanup:
 			usb_free_urb (entry->urb);
 			dev_kfree_skb (skb);
 			continue;
-		    default:
+		default:
 			devdbg (dev, "bogus skb state %d", entry->state);
 		}
 	}
@@ -1211,7 +1213,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 			status = 0;
 
 	}
-	if (status == 0 && dev->status)
+	if (status >= 0 && dev->status)
 		status = init_status (dev, udev);
 	if (status < 0)
 		goto out3;
diff --git a/drivers/net/usb/usbnet.h b/drivers/net/usb/usbnet.h
index a3f8b9e7bc00..a6c5820767de 100644
--- a/drivers/net/usb/usbnet.h
+++ b/drivers/net/usb/usbnet.h
@@ -47,7 +47,7 @@ struct usbnet {
 	unsigned long		data [5];
 	u32			xid;
 	u32			hard_mtu;	/* count any extra framing */
-	size_t		        rx_urb_size;    /* size for rx urbs  */
+	size_t			rx_urb_size;	/* size for rx urbs */
 	struct mii_if_info	mii;
 
 	/* various kinds of pending driver work */
@@ -85,7 +85,7 @@ struct driver_info {
 #define FLAG_NO_SETINT	0x0010		/* device can't set_interface() */
 #define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
 
-#define FLAG_FRAMING_AX 0x0040          /* AX88772/178 packets */
+#define FLAG_FRAMING_AX 0x0040		/* AX88772/178 packets */
 
 	/* init device ... can sleep, or cause probe() failure */
 	int	(*bind)(struct usbnet *, struct usb_interface *);
@@ -146,9 +146,9 @@ extern void usbnet_cdc_unbind (struct usbnet *, struct usb_interface *);
 
 /* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
 #define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
- 			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
- 			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
- 			|USB_CDC_PACKET_TYPE_DIRECTED)
+			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
+			|USB_CDC_PACKET_TYPE_DIRECTED)
 
 
 /* we record the state for each of our queued skbs */
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index adea290a9d5e..f51c2c138f10 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -622,7 +622,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	struct net_device *dev;
 	struct rhine_private *rp;
 	int i, rc;
-	u8 pci_rev;
 	u32 quirks;
 	long pioaddr;
 	long memaddr;
@@ -642,27 +641,25 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 		printk(version);
 #endif
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
 	io_size = 256;
 	phy_id = 0;
 	quirks = 0;
 	name = "Rhine";
-	if (pci_rev < VTunknown0) {
+	if (pdev->revision < VTunknown0) {
 		quirks = rqRhineI;
 		io_size = 128;
 	}
-	else if (pci_rev >= VT6102) {
+	else if (pdev->revision >= VT6102) {
 		quirks = rqWOL | rqForceReset;
-		if (pci_rev < VT6105) {
+		if (pdev->revision < VT6105) {
 			name = "Rhine II";
 			quirks |= rqStatusWBRace;	/* Rhine-II exclusive */
 		}
 		else {
 			phy_id = 1;	/* Integrated PHY, phy_id fixed to 1 */
-			if (pci_rev >= VT6105_B0)
+			if (pdev->revision >= VT6105_B0)
 				quirks |= rq6patterns;
-			if (pci_rev < VT6105M)
+			if (pdev->revision < VT6105M)
 				name = "Rhine III";
 			else
 				name = "Rhine III (Management Adapter)";
@@ -1492,9 +1489,9 @@ static int rhine_rx(struct net_device *dev, int limit)
 							    rp->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
 
-				eth_copy_and_sum(skb,
+				skb_copy_to_linear_data(skb,
 						 rp->rx_skbuff[entry]->data,
-						 pkt_len, 0);
+						 pkt_len);
 				skb_put(skb, pkt_len);
 				pci_dma_sync_single_for_device(rp->pdev,
 							       rp->rx_skbuff_dma[entry],
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index b670b97bcfde..f331843d1102 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -890,8 +890,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev,
 
 static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
 {
-	if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0)
-		return -EIO;
+	vptr->rev_id = pdev->revision;
 
 	pci_set_master(pdev);
 
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 999bf71937ca..ec1c556a47ca 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -3439,7 +3439,6 @@ static int __devinit
 cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int first_time = 1;
-	ucchar cpc_rev_id;
 	int err, eeprom_outdated = 0;
 	ucshort device_id;
 	pc300_t *card;
@@ -3480,7 +3479,6 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	card->hw.falcsize = pci_resource_len(pdev, 4);
 	card->hw.plxphys = pci_resource_start(pdev, 5);
 	card->hw.plxsize = pci_resource_len(pdev, 5);
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &cpc_rev_id);
 
 	switch (device_id) {
 		case PCI_DEVICE_ID_PC300_RX_1:
@@ -3498,7 +3496,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 #ifdef PC300_DEBUG_PCI
 	printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn);
-	printk("rev_id=%d) IRQ%d\n", cpc_rev_id, card->hw.irq);
+	printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq);
 	printk("cpc:found  ramaddr=0x%08lx plxaddr=0x%08lx "
 	       "ctladdr=0x%08lx falcaddr=0x%08lx\n",
 	       card->hw.ramphys, card->hw.plxphys, card->hw.scaphys,
diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
index aff05dba720a..dfbd3b00f03b 100644
--- a/drivers/net/wan/pc300too.c
+++ b/drivers/net/wan/pc300too.c
@@ -311,7 +311,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 					const struct pci_device_id *ent)
 {
 	card_t *card;
-	u8 rev_id;
 	u32 __iomem *p;
 	int i;
 	u32 ramsize;
@@ -366,7 +365,6 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
 			return -ENOMEM;
 		}
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
 	if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
 	    pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
 	    pci_resource_len(pdev, 3) < 16384) {
diff --git a/drivers/net/wan/pci200syn.c b/drivers/net/wan/pci200syn.c
index ca06a00d9d86..7f720de2e9f0 100644
--- a/drivers/net/wan/pci200syn.c
+++ b/drivers/net/wan/pci200syn.c
@@ -289,7 +289,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
 					 const struct pci_device_id *ent)
 {
 	card_t *card;
-	u8 rev_id;
 	u32 __iomem *p;
 	int i;
 	u32 ramsize;
@@ -330,7 +329,6 @@ static int __devinit pci200_pci_init_one(struct pci_dev *pdev,
 		return -ENOMEM;
 	}
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
 	if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
 	    pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
 	    pci_resource_len(pdev, 3) < 16384) {
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index fa2399cbd5ca..ae27af0141c0 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -546,6 +546,18 @@ config USB_ZD1201
 	  To compile this driver as a module, choose M here: the
 	  module will be called zd1201.
 
+config RTL8187
+	tristate "Realtek 8187 USB support"
+	depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
+	select EEPROM_93CX6
+	---help---
+	  This is a driver for RTL8187 based cards.
+	  These are USB based chips found in cards such as:
+
+	  Netgear WG111v2
+
+	  Thanks to Realtek for their support!
+
 source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/bcm43xx/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index d2124602263b..ef35bc6c4a22 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -44,3 +44,6 @@ obj-$(CONFIG_PCMCIA_WL3501)	+= wl3501_cs.o
 
 obj-$(CONFIG_USB_ZD1201)	+= zd1201.o
 obj-$(CONFIG_LIBERTAS_USB)     += libertas/
+
+rtl8187-objs		:= rtl8187_dev.o rtl8187_rtl8225.o
+obj-$(CONFIG_RTL8187)	+= rtl8187.o
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index ef6b253a92ce..c5d6753a55ea 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -3741,10 +3741,8 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
 	                          &bcm->board_type);
 	if (err)
 		goto err_iounmap;
-	err = bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
-	                          &bcm->board_revision);
-	if (err)
-		goto err_iounmap;
+
+	bcm->board_revision = bcm->pci_dev->revision;
 
 	err = bcm43xx_chipset_attach(bcm);
 	if (err)
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index b37f1e348700..d779199c30d0 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -1638,7 +1638,7 @@ void bcm43xx_phy_set_baseband_attenuation(struct bcm43xx_private *bcm,
 		return;
 	}
 
-	if (phy->analog > 1) {
+	if (phy->analog == 1) {
 		value = bcm43xx_phy_read(bcm, 0x0060) & ~0x003C;
 		value |= (baseband_attenuation << 2) & 0x003C;
 	} else {
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 5b3abd54d0e5..90900525379c 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -326,7 +326,6 @@ static int ap_control_proc_read(char *page, char **start, off_t off,
 	char *p = page;
 	struct ap_data *ap = (struct ap_data *) data;
 	char *policy_txt;
-	struct list_head *ptr;
 	struct mac_entry *entry;
 
 	if (off != 0) {
@@ -352,14 +351,12 @@ static int ap_control_proc_read(char *page, char **start, off_t off,
 	p += sprintf(p, "MAC entries: %u\n", ap->mac_restrictions.entries);
 	p += sprintf(p, "MAC list:\n");
 	spin_lock_bh(&ap->mac_restrictions.lock);
-	for (ptr = ap->mac_restrictions.mac_list.next;
-	     ptr != &ap->mac_restrictions.mac_list; ptr = ptr->next) {
+	list_for_each_entry(entry, &ap->mac_restrictions.mac_list, list) {
 		if (p - page > PAGE_SIZE - 80) {
 			p += sprintf(p, "All entries did not fit one page.\n");
 			break;
 		}
 
-		entry = list_entry(ptr, struct mac_entry, list);
 		p += sprintf(p, MACSTR "\n", MAC2STR(entry->addr));
 	}
 	spin_unlock_bh(&ap->mac_restrictions.lock);
@@ -413,7 +410,6 @@ int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac)
 static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions,
 			       u8 *mac)
 {
-	struct list_head *ptr;
 	struct mac_entry *entry;
 	int found = 0;
 
@@ -421,10 +417,7 @@ static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions,
 		return 0;
 
 	spin_lock_bh(&mac_restrictions->lock);
-	for (ptr = mac_restrictions->mac_list.next;
-	     ptr != &mac_restrictions->mac_list; ptr = ptr->next) {
-		entry = list_entry(ptr, struct mac_entry, list);
-
+	list_for_each_entry(entry, &mac_restrictions->mac_list, list) {
 		if (memcmp(entry->addr, mac, ETH_ALEN) == 0) {
 			found = 1;
 			break;
@@ -519,7 +512,7 @@ static int prism2_ap_proc_read(char *page, char **start, off_t off,
 {
 	char *p = page;
 	struct ap_data *ap = (struct ap_data *) data;
-	struct list_head *ptr;
+	struct sta_info *sta;
 	int i;
 
 	if (off > PROC_LIMIT) {
@@ -529,9 +522,7 @@ static int prism2_ap_proc_read(char *page, char **start, off_t off,
 
 	p += sprintf(p, "# BSSID CHAN SIGNAL NOISE RATE SSID FLAGS\n");
 	spin_lock_bh(&ap->sta_table_lock);
-	for (ptr = ap->sta_list.next; ptr != &ap->sta_list; ptr = ptr->next) {
-		struct sta_info *sta = (struct sta_info *) ptr;
-
+	list_for_each_entry(sta, &ap->sta_list, list) {
 		if (!sta->ap)
 			continue;
 
@@ -861,7 +852,7 @@ void hostap_init_ap_proc(local_info_t *local)
 
 void hostap_free_data(struct ap_data *ap)
 {
-	struct list_head *n, *ptr;
+	struct sta_info *n, *sta;
 
 	if (ap == NULL || !ap->initialized) {
 		printk(KERN_DEBUG "hostap_free_data: ap has not yet been "
@@ -875,8 +866,7 @@ void hostap_free_data(struct ap_data *ap)
 	ap->crypt = ap->crypt_priv = NULL;
 #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
 
-	list_for_each_safe(ptr, n, &ap->sta_list) {
-		struct sta_info *sta = list_entry(ptr, struct sta_info, list);
+	list_for_each_entry_safe(sta, n, &ap->sta_list, list) {
 		ap_sta_hash_del(ap, sta);
 		list_del(&sta->list);
 		if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local)
@@ -2704,6 +2694,8 @@ ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx)
 
 	if (hdr->addr1[0] & 0x01) {
 		/* broadcast/multicast frame - no AP related processing */
+		if (local->ap->num_sta <= 0)
+			ret = AP_TX_DROP;
 		goto out;
 	}
 
@@ -3198,15 +3190,14 @@ int hostap_update_rx_stats(struct ap_data *ap,
 
 void hostap_update_rates(local_info_t *local)
 {
-	struct list_head *ptr;
+	struct sta_info *sta;
 	struct ap_data *ap = local->ap;
 
 	if (!ap)
 		return;
 
 	spin_lock_bh(&ap->sta_table_lock);
-	for (ptr = ap->sta_list.next; ptr != &ap->sta_list; ptr = ptr->next) {
-		struct sta_info *sta = (struct sta_info *) ptr;
+	list_for_each_entry(sta, &ap->sta_list, list) {
 		prism2_check_tx_rates(sta);
 	}
 	spin_unlock_bh(&ap->sta_table_lock);
@@ -3242,11 +3233,10 @@ void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent,
 void hostap_add_wds_links(local_info_t *local)
 {
 	struct ap_data *ap = local->ap;
-	struct list_head *ptr;
+	struct sta_info *sta;
 
 	spin_lock_bh(&ap->sta_table_lock);
-	list_for_each(ptr, &ap->sta_list) {
-		struct sta_info *sta = list_entry(ptr, struct sta_info, list);
+	list_for_each_entry(sta, &ap->sta_list, list) {
 		if (sta->ap)
 			hostap_wds_link_oper(local, sta->addr, WDS_ADD);
 	}
diff --git a/drivers/net/wireless/hostap/hostap_config.h b/drivers/net/wireless/hostap/hostap_config.h
index c090a5aebb58..30acd39d76a2 100644
--- a/drivers/net/wireless/hostap/hostap_config.h
+++ b/drivers/net/wireless/hostap/hostap_config.h
@@ -1,8 +1,6 @@
 #ifndef HOSTAP_CONFIG_H
 #define HOSTAP_CONFIG_H
 
-#define PRISM2_VERSION "0.4.4-kernel"
-
 /* In the previous versions of Host AP driver, support for user space version
  * of IEEE 802.11 management (hostapd) used to be disabled in the default
  * configuration. From now on, support for hostapd is always included and it is
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ee1532b62e42..30e723f65979 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -22,7 +22,6 @@
 #include "hostap_wlan.h"
 
 
-static char *version = PRISM2_VERSION " (Jouni Malinen <j@w1.fi>)";
 static dev_info_t dev_info = "hostap_cs";
 
 MODULE_AUTHOR("Jouni Malinen");
@@ -30,7 +29,6 @@ MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
 		   "cards (PC Card).");
 MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
 MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
 
 
 static int ignore_cis_vcc;
@@ -910,14 +908,12 @@ static struct pcmcia_driver hostap_driver = {
 
 static int __init init_prism2_pccard(void)
 {
-	printk(KERN_INFO "%s: %s\n", dev_info, version);
 	return pcmcia_register_driver(&hostap_driver);
 }
 
 static void __exit exit_prism2_pccard(void)
 {
 	pcmcia_unregister_driver(&hostap_driver);
-	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
 }
 
 
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index cdea7f71b9eb..8c71077d653c 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -3893,8 +3893,6 @@ static void prism2_get_drvinfo(struct net_device *dev,
 	local = iface->local;
 
 	strncpy(info->driver, "hostap", sizeof(info->driver) - 1);
-	strncpy(info->version, PRISM2_VERSION,
-		sizeof(info->version) - 1);
 	snprintf(info->fw_version, sizeof(info->fw_version) - 1,
 		 "%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff,
 		 (local->sta_fw_ver >> 8) & 0xff,
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 4743426cf6ad..446de51bab74 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -37,7 +37,6 @@
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Host AP common routines");
 MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
 
 #define TX_TIMEOUT (2 * HZ)
 
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index db4899ed4bb1..7da3664b8515 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -20,7 +20,6 @@
 #include "hostap_wlan.h"
 
 
-static char *version = PRISM2_VERSION " (Jouni Malinen <j@w1.fi>)";
 static char *dev_info = "hostap_pci";
 
 
@@ -29,7 +28,6 @@ MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN "
 		   "PCI cards.");
 MODULE_SUPPORTED_DEVICE("Intersil Prism2.5-based WLAN PCI cards");
 MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
 
 
 /* struct local_info::hw_priv */
@@ -455,15 +453,11 @@ static struct pci_driver prism2_pci_drv_id = {
 	.suspend	= prism2_pci_suspend,
 	.resume		= prism2_pci_resume,
 #endif /* CONFIG_PM */
-	/* Linux 2.4.6 added save_state and enable_wake that are not used here
-	 */
 };
 
 
 static int __init init_prism2_pci(void)
 {
-	printk(KERN_INFO "%s: %s\n", dev_info, version);
-
 	return pci_register_driver(&prism2_pci_drv_id);
 }
 
@@ -471,7 +465,6 @@ static int __init init_prism2_pci(void)
 static void __exit exit_prism2_pci(void)
 {
 	pci_unregister_driver(&prism2_pci_drv_id);
-	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
 }
 
 
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index f0fd5ecdb24d..040dc3e36410 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -23,7 +23,6 @@
 #include "hostap_wlan.h"
 
 
-static char *version = PRISM2_VERSION " (Jouni Malinen <j@w1.fi>)";
 static char *dev_info = "hostap_plx";
 
 
@@ -32,7 +31,6 @@ MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
 		   "cards (PLX).");
 MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)");
 MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
 
 
 static int ignore_cis;
@@ -615,16 +613,11 @@ static struct pci_driver prism2_plx_drv_id = {
 	.id_table	= prism2_plx_id_table,
 	.probe		= prism2_plx_probe,
 	.remove		= prism2_plx_remove,
-	.suspend	= NULL,
-	.resume		= NULL,
-	.enable_wake	= NULL
 };
 
 
 static int __init init_prism2_plx(void)
 {
-	printk(KERN_INFO "%s: %s\n", dev_info, version);
-
 	return pci_register_driver(&prism2_plx_drv_id);
 }
 
@@ -632,7 +625,6 @@ static int __init init_prism2_plx(void)
 static void __exit exit_prism2_plx(void)
 {
 	pci_unregister_driver(&prism2_plx_drv_id);
-	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
 }
 
 
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index 3dcb13bb7d57..af2e4f2405f2 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -87,7 +87,6 @@ static struct pci_driver prism54_driver = {
 	.remove = prism54_remove,
 	.suspend = prism54_suspend,
 	.resume = prism54_resume,
-	/* .enable_wake ; we don't support this yet */
 };
 
 /******************************************************************************
@@ -167,8 +166,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_master(pdev);
 
 	/* enable MWI */
-	if (!pci_set_mwi(pdev))
-		printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME);
+	pci_try_set_mwi(pdev);
 
 	/* setup the network device interface and its structure */
 	if (!(ndev = islpci_setup(pdev))) {
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
new file mode 100644
index 000000000000..6124e467b156
--- /dev/null
+++ b/drivers/net/wireless/rtl8187.h
@@ -0,0 +1,145 @@
+/*
+ * Definitions for RTL8187 hardware
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_H
+#define RTL8187_H
+
+#include "rtl818x.h"
+
+#define RTL8187_EEPROM_TXPWR_BASE	0x05
+#define RTL8187_EEPROM_MAC_ADDR		0x07
+#define RTL8187_EEPROM_TXPWR_CHAN_1	0x16	/* 3 channels */
+#define RTL8187_EEPROM_TXPWR_CHAN_6	0x1B	/* 2 channels */
+#define RTL8187_EEPROM_TXPWR_CHAN_4	0x3D	/* 2 channels */
+
+#define RTL8187_REQT_READ	0xC0
+#define RTL8187_REQT_WRITE	0x40
+#define RTL8187_REQ_GET_REG	0x05
+#define RTL8187_REQ_SET_REG	0x05
+
+#define RTL8187_MAX_RX		0x9C4
+
+struct rtl8187_rx_info {
+	struct urb *urb;
+	struct ieee80211_hw *dev;
+};
+
+struct rtl8187_rx_hdr {
+	__le16 len;
+	__le16 rate;
+	u8 noise;
+	u8 signal;
+	u8 agc;
+	u8 reserved;
+	__le64 mac_time;
+} __attribute__((packed));
+
+struct rtl8187_tx_info {
+	struct ieee80211_tx_control *control;
+	struct urb *urb;
+	struct ieee80211_hw *dev;
+};
+
+struct rtl8187_tx_hdr {
+	__le32 flags;
+#define RTL8187_TX_FLAG_NO_ENCRYPT	(1 << 15)
+#define RTL8187_TX_FLAG_MORE_FRAG	(1 << 17)
+#define RTL8187_TX_FLAG_CTS		(1 << 18)
+#define RTL8187_TX_FLAG_RTS		(1 << 23)
+	__le16 rts_duration;
+	__le16 len;
+	__le32 retry;
+} __attribute__((packed));
+
+struct rtl8187_priv {
+	/* common between rtl818x drivers */
+	struct rtl818x_csr *map;
+	void (*rf_init)(struct ieee80211_hw *);
+	int mode;
+
+	/* rtl8187 specific */
+	struct ieee80211_channel channels[14];
+	struct ieee80211_rate rates[12];
+	struct ieee80211_hw_mode modes[2];
+	struct usb_device *udev;
+	u8 *hwaddr;
+	u16 txpwr_base;
+	u8 asic_rev;
+	struct sk_buff_head rx_queue;
+};
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
+
+static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr)
+{
+	u8 val;
+
+	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+			(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+	return val;
+}
+
+static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr)
+{
+	__le16 val;
+
+	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+			(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+	return le16_to_cpu(val);
+}
+
+static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
+{
+	__le32 val;
+
+	usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+			RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+			(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+	return le32_to_cpu(val);
+}
+
+static inline void rtl818x_iowrite8(struct rtl8187_priv *priv,
+				    u8 *addr, u8 val)
+{
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			(unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+}
+
+static inline void rtl818x_iowrite16(struct rtl8187_priv *priv,
+				     __le16 *addr, u16 val)
+{
+	__le16 buf = cpu_to_le16(val);
+
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			(unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
+}
+
+static inline void rtl818x_iowrite32(struct rtl8187_priv *priv,
+				     __le32 *addr, u32 val)
+{
+	__le32 buf = cpu_to_le32(val);
+
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			(unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
+}
+
+#endif /* RTL8187_H */
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
new file mode 100644
index 000000000000..cea85894b7f2
--- /dev/null
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -0,0 +1,731 @@
+/*
+ * Linux device driver for RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Magic delays and register offsets below are taken from the original
+ * r8187 driver sources.  Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/eeprom_93cx6.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8187_rtl8225.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
+MODULE_DESCRIPTION("RTL8187 USB wireless driver");
+MODULE_LICENSE("GPL");
+
+static struct usb_device_id rtl8187_table[] __devinitdata = {
+	/* Realtek */
+	{USB_DEVICE(0x0bda, 0x8187)},
+	/* Netgear */
+	{USB_DEVICE(0x0846, 0x6100)},
+	{USB_DEVICE(0x0846, 0x6a00)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8187_table);
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	data <<= 8;
+	data |= addr | 0x80;
+
+	rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
+	rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
+	rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
+	rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
+
+	msleep(1);
+}
+
+static void rtl8187_tx_cb(struct urb *urb)
+{
+	struct ieee80211_tx_status status = { {0} };
+	struct sk_buff *skb = (struct sk_buff *)urb->context;
+	struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb;
+
+	usb_free_urb(info->urb);
+	if (info->control)
+		memcpy(&status.control, info->control, sizeof(status.control));
+	kfree(info->control);
+	skb_pull(skb, sizeof(struct rtl8187_tx_hdr));
+	status.flags |= IEEE80211_TX_STATUS_ACK;
+	ieee80211_tx_status_irqsafe(info->dev, skb, &status);
+}
+
+static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
+		      struct ieee80211_tx_control *control)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct rtl8187_tx_hdr *hdr;
+	struct rtl8187_tx_info *info;
+	struct urb *urb;
+	u32 tmp;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		kfree_skb(skb);
+		return 0;
+	}
+
+	hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
+	tmp = skb->len - sizeof(*hdr);
+	tmp |= RTL8187_TX_FLAG_NO_ENCRYPT;
+	tmp |= control->rts_cts_rate << 19;
+	tmp |= control->tx_rate << 24;
+	if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb))
+		tmp |= RTL8187_TX_FLAG_MORE_FRAG;
+	if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
+		tmp |= RTL8187_TX_FLAG_RTS;
+		hdr->rts_duration =
+			ieee80211_rts_duration(dev, skb->len, control);
+	}
+	if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
+		tmp |= RTL8187_TX_FLAG_CTS;
+	hdr->flags = cpu_to_le32(tmp);
+	hdr->len = 0;
+	tmp = control->retry_limit << 8;
+	hdr->retry = cpu_to_le32(tmp);
+
+	info = (struct rtl8187_tx_info *)skb->cb;
+	info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC);
+	info->urb = urb;
+	info->dev = dev;
+	usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
+			  hdr, skb->len, rtl8187_tx_cb, skb);
+	usb_submit_urb(urb, GFP_ATOMIC);
+
+	return 0;
+}
+
+static void rtl8187_rx_cb(struct urb *urb)
+{
+	struct sk_buff *skb = (struct sk_buff *)urb->context;
+	struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
+	struct ieee80211_hw *dev = info->dev;
+	struct rtl8187_priv *priv = dev->priv;
+	struct rtl8187_rx_hdr *hdr;
+	struct ieee80211_rx_status rx_status = { 0 };
+	int rate, signal;
+
+	spin_lock(&priv->rx_queue.lock);
+	if (skb->next)
+		__skb_unlink(skb, &priv->rx_queue);
+	else {
+		spin_unlock(&priv->rx_queue.lock);
+		return;
+	}
+	spin_unlock(&priv->rx_queue.lock);
+
+	if (unlikely(urb->status)) {
+		usb_free_urb(urb);
+		dev_kfree_skb_irq(skb);
+		return;
+	}
+
+	skb_put(skb, urb->actual_length);
+	hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
+	skb_trim(skb, le16_to_cpu(hdr->len) & 0x0FFF);
+
+	signal = hdr->agc >> 1;
+	rate = (le16_to_cpu(hdr->rate) >> 4) & 0xF;
+	if (rate > 3) {	/* OFDM rate */
+		if (signal > 90)
+			signal = 90;
+		else if (signal < 25)
+			signal = 25;
+		signal = 90 - signal;
+	} else {	/* CCK rate */
+		if (signal > 95)
+			signal = 95;
+		else if (signal < 30)
+			signal = 30;
+		signal = 95 - signal;
+	}
+
+	rx_status.antenna = (hdr->signal >> 7) & 1;
+	rx_status.signal = 64 - min(hdr->noise, (u8)64);
+	rx_status.ssi = signal;
+	rx_status.rate = rate;
+	rx_status.freq = dev->conf.freq;
+	rx_status.channel = dev->conf.channel;
+	rx_status.phymode = dev->conf.phymode;
+	rx_status.mactime = le64_to_cpu(hdr->mac_time);
+	ieee80211_rx_irqsafe(dev, skb, &rx_status);
+
+	skb = dev_alloc_skb(RTL8187_MAX_RX);
+	if (unlikely(!skb)) {
+		usb_free_urb(urb);
+		/* TODO check rx queue length and refill *somewhere* */
+		return;
+	}
+
+	info = (struct rtl8187_rx_info *)skb->cb;
+	info->urb = urb;
+	info->dev = dev;
+	urb->transfer_buffer = skb_tail_pointer(skb);
+	urb->context = skb;
+	skb_queue_tail(&priv->rx_queue, skb);
+
+	usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static int rtl8187_init_urbs(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct urb *entry;
+	struct sk_buff *skb;
+	struct rtl8187_rx_info *info;
+
+	while (skb_queue_len(&priv->rx_queue) < 8) {
+		skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
+		if (!skb)
+			break;
+		entry = usb_alloc_urb(0, GFP_KERNEL);
+		if (!entry) {
+			kfree_skb(skb);
+			break;
+		}
+		usb_fill_bulk_urb(entry, priv->udev,
+				  usb_rcvbulkpipe(priv->udev, 1),
+				  skb_tail_pointer(skb),
+				  RTL8187_MAX_RX, rtl8187_rx_cb, skb);
+		info = (struct rtl8187_rx_info *)skb->cb;
+		info->urb = entry;
+		info->dev = dev;
+		skb_queue_tail(&priv->rx_queue, skb);
+		usb_submit_urb(entry, GFP_KERNEL);
+	}
+
+	return 0;
+}
+
+static int rtl8187_init_hw(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 reg;
+	int i;
+
+	/* reset */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+	msleep(200);
+	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
+	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
+	rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
+	msleep(200);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= (1 << 1);
+	reg |= RTL818X_CMD_RESET;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	i = 10;
+	do {
+		msleep(2);
+		if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
+		      RTL818X_CMD_RESET))
+			break;
+	} while (--i);
+
+	if (!i) {
+		printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
+		return -ETIMEDOUT;
+	}
+
+	/* reload registers from eeprom */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+
+	i = 10;
+	do {
+		msleep(4);
+		if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
+		      RTL818X_EEPROM_CMD_CONFIG))
+			break;
+	} while (--i);
+
+	if (!i) {
+		printk(KERN_ERR "%s: eeprom reset timeout!\n",
+		       wiphy_name(dev->wiphy));
+		return -ETIMEDOUT;
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	/* setup card */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
+	rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
+	rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	for (i = 0; i < ETH_ALEN; i++)
+		rtl818x_iowrite8(priv, &priv->map->MAC[i], priv->hwaddr[i]);
+
+	rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
+	reg &= 0x3F;
+	reg |= 0x80;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+	rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+	rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
+
+	// TODO: set RESP_RATE and BRSR properly
+	rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+	/* host_usb_init */
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
+	rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+	reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
+	rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
+	rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
+	rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
+	msleep(100);
+
+	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+	rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
+	msleep(100);
+
+	priv->rf_init(dev);
+
+	rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+	reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & 0xfffe;
+	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 0x1);
+	rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
+	rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
+	rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
+	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+
+	return 0;
+}
+
+static void rtl8187_set_channel(struct ieee80211_hw *dev, int channel)
+{
+	u32 reg;
+	struct rtl8187_priv *priv = dev->priv;
+
+	reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+	/* Enable TX loopback on MAC level to avoid TX during channel
+	 * changes, as this has be seen to causes problems and the
+	 * card will stop work until next reset
+	 */
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+			  reg | RTL818X_TX_CONF_LOOPBACK_MAC);
+	msleep(10);
+	rtl8225_rf_set_channel(dev, channel);
+	msleep(10);
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+}
+
+static int rtl8187_open(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u32 reg;
+	int ret;
+
+	ret = rtl8187_init_hw(dev);
+	if (ret)
+		return ret;
+
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+
+	rtl8187_init_urbs(dev);
+
+	reg = RTL818X_RX_CONF_ONLYERLPKT |
+	      RTL818X_RX_CONF_RX_AUTORESETPHY |
+	      RTL818X_RX_CONF_BSSID |
+	      RTL818X_RX_CONF_MGMT |
+	      RTL818X_RX_CONF_CTRL |
+	      RTL818X_RX_CONF_DATA |
+	      (7 << 13 /* RX FIFO threshold NONE */) |
+	      (7 << 10 /* MAX RX DMA */) |
+	      RTL818X_RX_CONF_BROADCAST |
+	      RTL818X_RX_CONF_MULTICAST |
+	      RTL818X_RX_CONF_NICMAC;
+	if (priv->mode == IEEE80211_IF_TYPE_MNTR)
+		reg |= RTL818X_RX_CONF_MONITOR;
+
+	rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+	reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
+	reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
+	reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+	reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+	rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+	reg  = RTL818X_TX_CONF_CW_MIN |
+	       (7 << 21 /* MAX TX DMA */) |
+	       RTL818X_TX_CONF_NO_ICV;
+	rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg |= RTL818X_CMD_TX_ENABLE;
+	reg |= RTL818X_CMD_RX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	return 0;
+}
+
+static int rtl8187_stop(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	struct rtl8187_rx_info *info;
+	struct sk_buff *skb;
+	u32 reg;
+
+	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+	reg = rtl818x_ioread8(priv, &priv->map->CMD);
+	reg &= ~RTL818X_CMD_TX_ENABLE;
+	reg &= ~RTL818X_CMD_RX_ENABLE;
+	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+	rtl8225_rf_stop(dev);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	while ((skb = skb_dequeue(&priv->rx_queue))) {
+		info = (struct rtl8187_rx_info *)skb->cb;
+		usb_kill_urb(info->urb);
+		kfree_skb(skb);
+	}
+	return 0;
+}
+
+static int rtl8187_add_interface(struct ieee80211_hw *dev,
+				 struct ieee80211_if_init_conf *conf)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	/* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */
+	if (priv->mode != IEEE80211_IF_TYPE_MGMT)
+		return -1;
+
+	switch (conf->type) {
+	case IEEE80211_IF_TYPE_STA:
+	case IEEE80211_IF_TYPE_MNTR:
+		priv->mode = conf->type;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	priv->hwaddr = conf->mac_addr;
+
+	return 0;
+}
+
+static void rtl8187_remove_interface(struct ieee80211_hw *dev,
+				     struct ieee80211_if_init_conf *conf)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	priv->mode = IEEE80211_IF_TYPE_MGMT;
+}
+
+static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	rtl8187_set_channel(dev, conf->channel);
+
+	rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
+
+	if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
+		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
+		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
+		rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
+		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
+	} else {
+		rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
+		rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
+		rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
+		rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
+	rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
+	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
+	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
+	return 0;
+}
+
+static int rtl8187_config_interface(struct ieee80211_hw *dev, int if_id,
+				    struct ieee80211_if_conf *conf)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int i;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
+
+	if (is_valid_ether_addr(conf->bssid))
+		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
+	else
+		rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
+
+	return 0;
+}
+
+static const struct ieee80211_ops rtl8187_ops = {
+	.tx			= rtl8187_tx,
+	.open			= rtl8187_open,
+	.stop			= rtl8187_stop,
+	.add_interface		= rtl8187_add_interface,
+	.remove_interface	= rtl8187_remove_interface,
+	.config			= rtl8187_config,
+	.config_interface	= rtl8187_config_interface,
+};
+
+static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+	struct ieee80211_hw *dev = eeprom->data;
+	struct rtl8187_priv *priv = dev->priv;
+	u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+
+	eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+	eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+	eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+	eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+	struct ieee80211_hw *dev = eeprom->data;
+	struct rtl8187_priv *priv = dev->priv;
+	u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
+
+	if (eeprom->reg_data_in)
+		reg |= RTL818X_EEPROM_CMD_WRITE;
+	if (eeprom->reg_data_out)
+		reg |= RTL818X_EEPROM_CMD_READ;
+	if (eeprom->reg_data_clock)
+		reg |= RTL818X_EEPROM_CMD_CK;
+	if (eeprom->reg_chip_select)
+		reg |= RTL818X_EEPROM_CMD_CS;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+	udelay(10);
+}
+
+static int __devinit rtl8187_probe(struct usb_interface *intf,
+				   const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct ieee80211_hw *dev;
+	struct rtl8187_priv *priv;
+	struct eeprom_93cx6 eeprom;
+	struct ieee80211_channel *channel;
+	u16 txpwr, reg;
+	int err, i;
+
+	dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
+	if (!dev) {
+		printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
+		return -ENOMEM;
+	}
+
+	priv = dev->priv;
+
+	SET_IEEE80211_DEV(dev, &intf->dev);
+	usb_set_intfdata(intf, dev);
+	priv->udev = udev;
+
+	usb_get_dev(udev);
+
+	skb_queue_head_init(&priv->rx_queue);
+	memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
+	memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
+	priv->map = (struct rtl818x_csr *)0xFF00;
+	priv->modes[0].mode = MODE_IEEE80211G;
+	priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates);
+	priv->modes[0].rates = priv->rates;
+	priv->modes[0].num_channels = ARRAY_SIZE(rtl818x_channels);
+	priv->modes[0].channels = priv->channels;
+	priv->modes[1].mode = MODE_IEEE80211B;
+	priv->modes[1].num_rates = 4;
+	priv->modes[1].rates = priv->rates;
+	priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels);
+	priv->modes[1].channels = priv->channels;
+	priv->mode = IEEE80211_IF_TYPE_MGMT;
+	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+		     IEEE80211_HW_RX_INCLUDES_FCS |
+		     IEEE80211_HW_WEP_INCLUDE_IV |
+		     IEEE80211_HW_DATA_NULLFUNC_ACK;
+	dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
+	dev->queues = 1;
+	dev->max_rssi = 65;
+	dev->max_signal = 64;
+
+	for (i = 0; i < 2; i++)
+		if ((err = ieee80211_register_hwmode(dev, &priv->modes[i])))
+			goto err_free_dev;
+
+	eeprom.data = dev;
+	eeprom.register_read = rtl8187_eeprom_register_read;
+	eeprom.register_write = rtl8187_eeprom_register_write;
+	if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+		eeprom.width = PCI_EEPROM_WIDTH_93C66;
+	else
+		eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	udelay(10);
+
+	eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
+			       (__le16 __force *)dev->wiphy->perm_addr, 3);
+	if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+		printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
+		       "generated MAC address\n");
+		random_ether_addr(dev->wiphy->perm_addr);
+	}
+
+	channel = priv->channels;
+	for (i = 0; i < 3; i++) {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
+				  &txpwr);
+		(*channel++).val = txpwr & 0xFF;
+		(*channel++).val = txpwr >> 8;
+	}
+	for (i = 0; i < 2; i++) {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
+				  &txpwr);
+		(*channel++).val = txpwr & 0xFF;
+		(*channel++).val = txpwr >> 8;
+	}
+	for (i = 0; i < 2; i++) {
+		eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6 + i,
+				  &txpwr);
+		(*channel++).val = txpwr & 0xFF;
+		(*channel++).val = txpwr >> 8;
+	}
+
+	eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
+			  &priv->txpwr_base);
+
+	reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & ~1;
+	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 1);
+	/* 0 means asic B-cut, we should use SW 3 wire
+	 * bit-by-bit banging for radio. 1 means we can use
+	 * USB specific request to write radio registers */
+	priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
+	rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl8225_write(dev, 0, 0x1B7);
+
+	if (rtl8225_read(dev, 8) != 0x588 || rtl8225_read(dev, 9) != 0x700)
+		priv->rf_init = rtl8225_rf_init;
+	else
+		priv->rf_init = rtl8225z2_rf_init;
+
+	rtl8225_write(dev, 0, 0x0B7);
+
+	err = ieee80211_register_hw(dev);
+	if (err) {
+		printk(KERN_ERR "rtl8187: Cannot register device\n");
+		goto err_free_dev;
+	}
+
+	printk(KERN_INFO "%s: hwaddr " MAC_FMT ", rtl8187 V%d + %s\n",
+	       wiphy_name(dev->wiphy), MAC_ARG(dev->wiphy->perm_addr),
+	       priv->asic_rev, priv->rf_init == rtl8225_rf_init ?
+	       "rtl8225" : "rtl8225z2");
+
+	return 0;
+
+ err_free_dev:
+	ieee80211_free_hw(dev);
+	usb_set_intfdata(intf, NULL);
+	usb_put_dev(udev);
+	return err;
+}
+
+static void __devexit rtl8187_disconnect(struct usb_interface *intf)
+{
+	struct ieee80211_hw *dev = usb_get_intfdata(intf);
+	struct rtl8187_priv *priv;
+
+	if (!dev)
+		return;
+
+	ieee80211_unregister_hw(dev);
+
+	priv = dev->priv;
+	usb_put_dev(interface_to_usbdev(intf));
+	ieee80211_free_hw(dev);
+}
+
+static struct usb_driver rtl8187_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rtl8187_table,
+	.probe		= rtl8187_probe,
+	.disconnect	= rtl8187_disconnect,
+};
+
+static int __init rtl8187_init(void)
+{
+	return usb_register(&rtl8187_driver);
+}
+
+static void __exit rtl8187_exit(void)
+{
+	usb_deregister(&rtl8187_driver);
+}
+
+module_init(rtl8187_init);
+module_exit(rtl8187_exit);
diff --git a/drivers/net/wireless/rtl8187_rtl8225.c b/drivers/net/wireless/rtl8187_rtl8225.c
new file mode 100644
index 000000000000..e25a09f1b068
--- /dev/null
+++ b/drivers/net/wireless/rtl8187_rtl8225.c
@@ -0,0 +1,745 @@
+/*
+ * Radio tuning for RTL8225 on RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Magic delays, register offsets, and phy value tables below are
+ * taken from the original r8187 driver sources.  Thanks to Realtek
+ * for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8187_rtl8225.h"
+
+static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u16 reg80, reg84, reg82;
+	u32 bangdata;
+	int i;
+
+	bangdata = (data << 4) | (addr & 0xf);
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
+
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	udelay(10);
+
+	for (i = 15; i >= 0; i--) {
+		u16 reg = reg80 | (bangdata & (1 << i)) >> i;
+
+		if (i & 1)
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+
+		if (!(i & 1))
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+	msleep(2);
+}
+
+static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u16 reg80, reg82, reg84;
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+	reg80 &= ~(0x3 << 2);
+	reg84 &= ~0xF;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x0007);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x0007);
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	udelay(10);
+
+	usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+			RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+			addr, 0x8225, &data, sizeof(data), HZ / 2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(10);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+	msleep(2);
+}
+
+void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (priv->asic_rev)
+		rtl8225_write_8051(dev, addr, data);
+	else
+		rtl8225_write_bitbang(dev, addr, data);
+}
+
+u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u16 reg80, reg82, reg84, out;
+	int i;
+
+	reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+	reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+	reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+	reg80 &= ~0xF;
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+	udelay(4);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+	udelay(5);
+
+	for (i = 4; i >= 0; i--) {
+		u16 reg = reg80 | ((addr >> i) & 1);
+
+		if (!(i & 1)) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			udelay(1);
+		}
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg | (1 << 1));
+		udelay(2);
+
+		if (i & 1) {
+			rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+			udelay(1);
+		}
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 1));
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	udelay(2);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3));
+	udelay(2);
+
+	out = 0;
+	for (i = 11; i >= 0; i--) {
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		udelay(1);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		udelay(2);
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3) | (1 << 1));
+		udelay(2);
+
+		if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
+			out |= 1 << i;
+
+		rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+				  reg80 | (1 << 3));
+		udelay(2);
+	}
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+			  reg80 | (1 << 3) | (1 << 2));
+	udelay(2);
+
+	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
+
+	return out;
+}
+
+static const u16 rtl8225bcd_rxgain[] = {
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+	0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
+	0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
+};
+
+static const u8 rtl8225_agc[] = {
+	0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
+	0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
+	0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
+	0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
+	0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
+	0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
+	0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
+	0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
+	0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
+	0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
+	0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
+	0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
+	0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
+};
+
+static const u8 rtl8225_gain[] = {
+	0x23, 0x88, 0x7c, 0xa5,	/* -82dBm */
+	0x23, 0x88, 0x7c, 0xb5,	/* -82dBm */
+	0x23, 0x88, 0x7c, 0xc5,	/* -82dBm */
+	0x33, 0x80, 0x79, 0xc5,	/* -78dBm */
+	0x43, 0x78, 0x76, 0xc5,	/* -74dBm */
+	0x53, 0x60, 0x73, 0xc5,	/* -70dBm */
+	0x63, 0x58, 0x70, 0xc5,	/* -66dBm */
+};
+
+static const u8 rtl8225_threshold[] = {
+	0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
+};
+
+static const u8 rtl8225_tx_gain_cck_ofdm[] = {
+	0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225_tx_power_cck[] = {
+	0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+	0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+	0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+	0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+	0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+	0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225_tx_power_cck_ch14[] = {
+	0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+	0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+	0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+	0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+	0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+	0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225_tx_power_ofdm[] = {
+	0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225_chan[] = {
+	0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
+	0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
+};
+
+static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	u32 reg;
+	int i;
+
+	cck_power = priv->channels[channel - 1].val & 0xF;
+	ofdm_power = priv->channels[channel - 1].val >> 4;
+
+	cck_power = min(cck_power, (u8)11);
+	ofdm_power = min(ofdm_power, (u8)35);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
+
+	if (channel == 14)
+		tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
+	else
+		tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	msleep(1); // FIXME: optional?
+
+	/* anaparam2 on */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl8225_write_phy_ofdm(dev, 2, 0x42);
+	rtl8225_write_phy_ofdm(dev, 6, 0x00);
+	rtl8225_write_phy_ofdm(dev, 8, 0x00);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1);
+
+	tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
+
+	rtl8225_write_phy_ofdm(dev, 5, *tmp);
+	rtl8225_write_phy_ofdm(dev, 7, *tmp);
+
+	msleep(1);
+}
+
+void rtl8225_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int i;
+
+	rtl8225_write(dev, 0x0, 0x067); msleep(1);
+	rtl8225_write(dev, 0x1, 0xFE0); msleep(1);
+	rtl8225_write(dev, 0x2, 0x44D); msleep(1);
+	rtl8225_write(dev, 0x3, 0x441); msleep(1);
+	rtl8225_write(dev, 0x4, 0x486); msleep(1);
+	rtl8225_write(dev, 0x5, 0xBC0); msleep(1);
+	rtl8225_write(dev, 0x6, 0xAE6); msleep(1);
+	rtl8225_write(dev, 0x7, 0x82A); msleep(1);
+	rtl8225_write(dev, 0x8, 0x01F); msleep(1);
+	rtl8225_write(dev, 0x9, 0x334); msleep(1);
+	rtl8225_write(dev, 0xA, 0xFD4); msleep(1);
+	rtl8225_write(dev, 0xB, 0x391); msleep(1);
+	rtl8225_write(dev, 0xC, 0x050); msleep(1);
+	rtl8225_write(dev, 0xD, 0x6DB); msleep(1);
+	rtl8225_write(dev, 0xE, 0x029); msleep(1);
+	rtl8225_write(dev, 0xF, 0x914); msleep(100);
+
+	rtl8225_write(dev, 0x2, 0xC4D); msleep(200);
+	rtl8225_write(dev, 0x2, 0x44D); msleep(200);
+
+	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+		rtl8225_write(dev, 0x02, 0x0c4d);
+		msleep(200);
+		rtl8225_write(dev, 0x02, 0x044d);
+		msleep(100);
+		if (!(rtl8225_read(dev, 6) & (1 << 7)))
+			printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
+			       wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+	}
+
+	rtl8225_write(dev, 0x0, 0x127);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x0, 0x027);
+	rtl8225_write(dev, 0x0, 0x22F);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		msleep(1);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+		msleep(1);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x42); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+	rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D);
+
+	rtl8225_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+
+	/* set sensitivity */
+	rtl8225_write(dev, 0x0c, 0x50);
+	rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+	rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+	rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]);
+}
+
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+	0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225z2_tx_power_cck[] = {
+	0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
+};
+
+static const u8 rtl8225z2_tx_power_ofdm[] = {
+	0x42, 0x00, 0x40, 0x00, 0x40
+};
+
+static const u8 rtl8225z2_tx_gain_cck_ofdm[] = {
+	0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+	0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+	0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+	0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+	0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+	0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23
+};
+
+static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	u8 cck_power, ofdm_power;
+	const u8 *tmp;
+	u32 reg;
+	int i;
+
+	cck_power = priv->channels[channel - 1].val & 0xF;
+	ofdm_power = priv->channels[channel - 1].val >> 4;
+
+	cck_power = min(cck_power, (u8)15);
+	cck_power += priv->txpwr_base & 0xF;
+	cck_power = min(cck_power, (u8)35);
+
+	ofdm_power = min(ofdm_power, (u8)15);
+	ofdm_power += priv->txpwr_base >> 4;
+	ofdm_power = min(ofdm_power, (u8)35);
+
+	if (channel == 14)
+		tmp = rtl8225z2_tx_power_cck_ch14;
+	else
+		tmp = rtl8225z2_tx_power_cck;
+
+	for (i = 0; i < 8; i++)
+		rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+			 rtl8225z2_tx_gain_cck_ofdm[cck_power]);
+	msleep(1);
+
+	/* anaparam2 on */
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+	rtl8225_write_phy_ofdm(dev, 2, 0x42);
+	rtl8225_write_phy_ofdm(dev, 5, 0x00);
+	rtl8225_write_phy_ofdm(dev, 6, 0x40);
+	rtl8225_write_phy_ofdm(dev, 7, 0x00);
+	rtl8225_write_phy_ofdm(dev, 8, 0x40);
+
+	rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+			 rtl8225z2_tx_gain_cck_ofdm[ofdm_power]);
+	msleep(1);
+}
+
+static const u16 rtl8225z2_rxgain[] = {
+	0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+	0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+	0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+	0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+	0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+	0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+	0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+	0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+	0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+	0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+	0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
+	0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
+};
+
+static const u8 rtl8225z2_gain_bg[] = {
+	0x23, 0x15, 0xa5, /* -82-1dBm */
+	0x23, 0x15, 0xb5, /* -82-2dBm */
+	0x23, 0x15, 0xc5, /* -82-3dBm */
+	0x33, 0x15, 0xc5, /* -78dBm */
+	0x43, 0x15, 0xc5, /* -74dBm */
+	0x53, 0x15, 0xc5, /* -70dBm */
+	0x63, 0x15, 0xc5  /* -66dBm */
+};
+
+void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+{
+	struct rtl8187_priv *priv = dev->priv;
+	int i;
+
+	rtl8225_write(dev, 0x0, 0x2BF); msleep(1);
+	rtl8225_write(dev, 0x1, 0xEE0); msleep(1);
+	rtl8225_write(dev, 0x2, 0x44D); msleep(1);
+	rtl8225_write(dev, 0x3, 0x441); msleep(1);
+	rtl8225_write(dev, 0x4, 0x8C3); msleep(1);
+	rtl8225_write(dev, 0x5, 0xC72); msleep(1);
+	rtl8225_write(dev, 0x6, 0x0E6); msleep(1);
+	rtl8225_write(dev, 0x7, 0x82A); msleep(1);
+	rtl8225_write(dev, 0x8, 0x03F); msleep(1);
+	rtl8225_write(dev, 0x9, 0x335); msleep(1);
+	rtl8225_write(dev, 0xa, 0x9D4); msleep(1);
+	rtl8225_write(dev, 0xb, 0x7BB); msleep(1);
+	rtl8225_write(dev, 0xc, 0x850); msleep(1);
+	rtl8225_write(dev, 0xd, 0xCDF); msleep(1);
+	rtl8225_write(dev, 0xe, 0x02B); msleep(1);
+	rtl8225_write(dev, 0xf, 0x114); msleep(100);
+
+	rtl8225_write(dev, 0x0, 0x1B7);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+		rtl8225_write(dev, 0x1, i + 1);
+		rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+	}
+
+	rtl8225_write(dev, 0x3, 0x080);
+	rtl8225_write(dev, 0x5, 0x004);
+	rtl8225_write(dev, 0x0, 0x0B7);
+	rtl8225_write(dev, 0x2, 0xc4D);
+
+	msleep(200);
+	rtl8225_write(dev, 0x2, 0x44D);
+	msleep(100);
+
+	if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+		rtl8225_write(dev, 0x02, 0x0C4D);
+		msleep(200);
+		rtl8225_write(dev, 0x02, 0x044D);
+		msleep(100);
+		if (!(rtl8225_read(dev, 6) & (1 << 7)))
+			printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
+			       wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+	}
+
+	msleep(200);
+
+	rtl8225_write(dev, 0x0, 0x2BF);
+
+	for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+		rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+		msleep(1);
+		rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+		msleep(1);
+	}
+
+	msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x02, 0x42); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0a, 0x08); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
+	rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x11, 0x07); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1b, 0x15); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x17); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); //FIXME: not needed?
+	rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x25, 0x00); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+	rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+	rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]);
+	rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]);
+	rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]);
+	rtl8225_write_phy_ofdm(dev, 0x21, 0x37);
+
+	rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+	rtl8225_write_phy_cck(dev, 0x19, 0x00);
+	rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+	rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+	rtl8225_write_phy_cck(dev, 0x40, 0x86);
+	rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1);
+	rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+	rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); msleep(1);
+
+	rtl8225z2_rf_set_tx_power(dev, 1);
+
+	/* RX antenna default to A */
+	rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);	/* B: 0xDB */
+	rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);	/* B: 0x10 */
+
+	rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03);	/* B: 0x00 */
+	msleep(1);
+	rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+}
+
+void rtl8225_rf_stop(struct ieee80211_hw *dev)
+{
+	u8 reg;
+	struct rtl8187_priv *priv = dev->priv;
+
+	rtl8225_write(dev, 0x4, 0x1f); msleep(1);
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8225_rf_set_channel(struct ieee80211_hw *dev, int channel)
+{
+	struct rtl8187_priv *priv = dev->priv;
+
+	if (priv->rf_init == rtl8225_rf_init)
+		rtl8225_rf_set_tx_power(dev, channel);
+	else
+		rtl8225z2_rf_set_tx_power(dev, channel);
+
+	rtl8225_write(dev, 0x7, rtl8225_chan[channel - 1]);
+	msleep(10);
+}
diff --git a/drivers/net/wireless/rtl8187_rtl8225.h b/drivers/net/wireless/rtl8187_rtl8225.h
new file mode 100644
index 000000000000..798ba4a97376
--- /dev/null
+++ b/drivers/net/wireless/rtl8187_rtl8225.h
@@ -0,0 +1,44 @@
+/*
+ * Radio tuning definitions for RTL8225 on RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_RTL8225_H
+#define RTL8187_RTL8225_H
+
+#define RTL8225_ANAPARAM_ON	0xa0000a59
+#define RTL8225_ANAPARAM2_ON	0x860c7312
+#define RTL8225_ANAPARAM_OFF	0xa00beb59
+#define RTL8225_ANAPARAM2_OFF	0x840dec11
+
+void rtl8225_write(struct ieee80211_hw *, u8 addr, u16 data);
+u16  rtl8225_read(struct ieee80211_hw *, u8 addr);
+
+void rtl8225_rf_init(struct ieee80211_hw *);
+void rtl8225z2_rf_init(struct ieee80211_hw *);
+void rtl8225_rf_stop(struct ieee80211_hw *);
+void rtl8225_rf_set_channel(struct ieee80211_hw *, int);
+
+
+static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
+					  u8 addr, u32 data)
+{
+	rtl8187_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
+					 u8 addr, u32 data)
+{
+	rtl8187_write_phy(dev, addr, data | 0x10000);
+}
+
+#endif /* RTL8187_RTL8225_H */
diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h
new file mode 100644
index 000000000000..283de30628e1
--- /dev/null
+++ b/drivers/net/wireless/rtl818x.h
@@ -0,0 +1,226 @@
+/*
+ * Definitions for RTL818x hardware
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL818X_H
+#define RTL818X_H
+
+struct rtl818x_csr {
+	u8	MAC[6];
+	u8	reserved_0[2];
+	__le32	MAR[2];
+	u8	RX_FIFO_COUNT;
+	u8	reserved_1;
+	u8	TX_FIFO_COUNT;
+	u8	BQREQ;
+	u8	reserved_2[4];
+	__le32	TSFT[2];
+	__le32	TLPDA;
+	__le32	TNPDA;
+	__le32	THPDA;
+	__le16	BRSR;
+	u8	BSSID[6];
+	u8	RESP_RATE;
+	u8	EIFS;
+	u8	reserved_3[1];
+	u8	CMD;
+#define RTL818X_CMD_TX_ENABLE		(1 << 2)
+#define RTL818X_CMD_RX_ENABLE		(1 << 3)
+#define RTL818X_CMD_RESET		(1 << 4)
+	u8	reserved_4[4];
+	__le16	INT_MASK;
+	__le16	INT_STATUS;
+#define RTL818X_INT_RX_OK		(1 <<  0)
+#define RTL818X_INT_RX_ERR		(1 <<  1)
+#define RTL818X_INT_TXL_OK		(1 <<  2)
+#define RTL818X_INT_TXL_ERR		(1 <<  3)
+#define RTL818X_INT_RX_DU		(1 <<  4)
+#define RTL818X_INT_RX_FO		(1 <<  5)
+#define RTL818X_INT_TXN_OK		(1 <<  6)
+#define RTL818X_INT_TXN_ERR		(1 <<  7)
+#define RTL818X_INT_TXH_OK		(1 <<  8)
+#define RTL818X_INT_TXH_ERR		(1 <<  9)
+#define RTL818X_INT_TXB_OK		(1 << 10)
+#define RTL818X_INT_TXB_ERR		(1 << 11)
+#define RTL818X_INT_ATIM		(1 << 12)
+#define RTL818X_INT_BEACON		(1 << 13)
+#define RTL818X_INT_TIME_OUT		(1 << 14)
+#define RTL818X_INT_TX_FO		(1 << 15)
+	__le32	TX_CONF;
+#define RTL818X_TX_CONF_LOOPBACK_MAC	(1 << 17)
+#define RTL818X_TX_CONF_NO_ICV		(1 << 19)
+#define RTL818X_TX_CONF_DISCW		(1 << 20)
+#define RTL818X_TX_CONF_R8180_ABCD	(2 << 25)
+#define RTL818X_TX_CONF_R8180_F		(3 << 25)
+#define RTL818X_TX_CONF_R8185_ABC	(4 << 25)
+#define RTL818X_TX_CONF_R8185_D		(5 << 25)
+#define RTL818X_TX_CONF_HWVER_MASK	(7 << 25)
+#define RTL818X_TX_CONF_CW_MIN		(1 << 31)
+	__le32	RX_CONF;
+#define RTL818X_RX_CONF_MONITOR		(1 <<  0)
+#define RTL818X_RX_CONF_NICMAC		(1 <<  1)
+#define RTL818X_RX_CONF_MULTICAST	(1 <<  2)
+#define RTL818X_RX_CONF_BROADCAST	(1 <<  3)
+#define RTL818X_RX_CONF_DATA		(1 << 18)
+#define RTL818X_RX_CONF_CTRL		(1 << 19)
+#define RTL818X_RX_CONF_MGMT		(1 << 20)
+#define RTL818X_RX_CONF_BSSID		(1 << 23)
+#define RTL818X_RX_CONF_RX_AUTORESETPHY	(1 << 28)
+#define RTL818X_RX_CONF_ONLYERLPKT	(1 << 31)
+	__le32	INT_TIMEOUT;
+	__le32	TBDA;
+	u8	EEPROM_CMD;
+#define RTL818X_EEPROM_CMD_READ		(1 << 0)
+#define RTL818X_EEPROM_CMD_WRITE	(1 << 1)
+#define RTL818X_EEPROM_CMD_CK		(1 << 2)
+#define RTL818X_EEPROM_CMD_CS		(1 << 3)
+#define RTL818X_EEPROM_CMD_NORMAL	(0 << 6)
+#define RTL818X_EEPROM_CMD_LOAD		(1 << 6)
+#define RTL818X_EEPROM_CMD_PROGRAM	(2 << 6)
+#define RTL818X_EEPROM_CMD_CONFIG	(3 << 6)
+	u8	CONFIG0;
+	u8	CONFIG1;
+	u8	CONFIG2;
+	__le32	ANAPARAM;
+	u8	MSR;
+#define RTL818X_MSR_NO_LINK		(0 << 2)
+#define RTL818X_MSR_ADHOC		(1 << 2)
+#define RTL818X_MSR_INFRA		(2 << 2)
+	u8	CONFIG3;
+#define RTL818X_CONFIG3_ANAPARAM_WRITE	(1 << 6)
+	u8	CONFIG4;
+#define RTL818X_CONFIG4_POWEROFF	(1 << 6)
+#define RTL818X_CONFIG4_VCOOFF		(1 << 7)
+	u8	TESTR;
+	u8	reserved_9[2];
+	__le16	PGSELECT;
+	__le32	ANAPARAM2;
+	u8	reserved_10[12];
+	__le16	BEACON_INTERVAL;
+	__le16	ATIM_WND;
+	__le16	BEACON_INTERVAL_TIME;
+	__le16	ATIMTR_INTERVAL;
+	u8	reserved_11[4];
+	u8	PHY[4];
+	__le16	RFPinsOutput;
+	__le16	RFPinsEnable;
+	__le16	RFPinsSelect;
+	__le16	RFPinsInput;
+	__le32	RF_PARA;
+	__le32	RF_TIMING;
+	u8	GP_ENABLE;
+	u8	GPIO;
+	u8	reserved_12[10];
+	u8	TX_AGC_CTL;
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT		(1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT	(1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT			(1 << 2)
+	u8	TX_GAIN_CCK;
+	u8	TX_GAIN_OFDM;
+	u8	TX_ANTENNA;
+	u8	reserved_13[16];
+	u8	WPA_CONF;
+	u8	reserved_14[3];
+	u8	SIFS;
+	u8	DIFS;
+	u8	SLOT;
+	u8	reserved_15[5];
+	u8	CW_CONF;
+#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT	(1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT	(1 << 1)
+	u8	CW_VAL;
+	u8	RATE_FALLBACK;
+	u8	reserved_16[25];
+	u8	CONFIG5;
+	u8	TX_DMA_POLLING;
+	u8	reserved_17[2];
+	__le16	CWR;
+	u8	RETRY_CTR;
+	u8	reserved_18[5];
+	__le32	RDSAR;
+	u8	reserved_19[18];
+	u16	TALLY_CNT;
+	u8	TALLY_SEL;
+} __attribute__((packed));
+
+static const struct ieee80211_rate rtl818x_rates[] = {
+	{ .rate = 10,
+	  .val = 0,
+	  .flags = IEEE80211_RATE_CCK },
+	{ .rate = 20,
+	  .val = 1,
+	  .flags = IEEE80211_RATE_CCK },
+	{ .rate = 55,
+	  .val = 2,
+	  .flags = IEEE80211_RATE_CCK },
+	{ .rate = 110,
+	  .val = 3,
+	  .flags = IEEE80211_RATE_CCK },
+	{ .rate = 60,
+	  .val = 4,
+	  .flags = IEEE80211_RATE_OFDM },
+	{ .rate = 90,
+	  .val = 5,
+	  .flags = IEEE80211_RATE_OFDM },
+	{ .rate = 120,
+	  .val = 6,
+	  .flags = IEEE80211_RATE_OFDM },
+	{ .rate = 180,
+	  .val = 7,
+	  .flags = IEEE80211_RATE_OFDM },
+	{ .rate = 240,
+	  .val = 8,
+	  .flags = IEEE80211_RATE_OFDM },
+	{ .rate = 360,
+	  .val = 9,
+	  .flags = IEEE80211_RATE_OFDM },
+	{ .rate = 480,
+	  .val = 10,
+	  .flags = IEEE80211_RATE_OFDM },
+	{ .rate = 540,
+	  .val = 11,
+	  .flags = IEEE80211_RATE_OFDM },
+};
+
+static const struct ieee80211_channel rtl818x_channels[] = {
+	{ .chan = 1,
+	  .freq = 2412},
+	{ .chan = 2,
+	  .freq = 2417},
+	{ .chan = 3,
+	  .freq = 2422},
+	{ .chan = 4,
+	  .freq = 2427},
+	{ .chan = 5,
+	  .freq = 2432},
+	{ .chan = 6,
+	  .freq = 2437},
+	{ .chan = 7,
+	  .freq = 2442},
+	{ .chan = 8,
+	  .freq = 2447},
+	{ .chan = 9,
+	  .freq = 2452},
+	{ .chan = 10,
+	  .freq = 2457},
+	{ .chan = 11,
+	  .freq = 2462},
+	{ .chan = 12,
+	  .freq = 2467},
+	{ .chan = 13,
+	  .freq = 2472},
+	{ .chan = 14,
+	  .freq = 2484}
+};
+
+#endif /* RTL818X_H */
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index ce9230b2f630..c8b5c2271938 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1011,7 +1011,7 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
 	} else {
 		skb->dev = dev;
 		skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
-		eth_copy_and_sum(skb, (unsigned char *)&sig.daddr, 12, 0);
+		skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12);
 		wl3501_receive(this, skb->data, pkt_len);
 		skb_put(skb, pkt_len);
 		skb->protocol	= eth_type_trans(skb, dev);
diff --git a/drivers/net/wireless/zd1211rw/Makefile b/drivers/net/wireless/zd1211rw/Makefile
index 6603ad5be63d..4d505903352c 100644
--- a/drivers/net/wireless/zd1211rw/Makefile
+++ b/drivers/net/wireless/zd1211rw/Makefile
@@ -3,7 +3,7 @@ obj-$(CONFIG_ZD1211RW) += zd1211rw.o
 zd1211rw-objs := zd_chip.o zd_ieee80211.o \
 		zd_mac.o zd_netdev.o \
 		zd_rf_al2230.o zd_rf_rf2959.o \
-		zd_rf_al7230b.o \
+		zd_rf_al7230b.o zd_rf_uw2453.o \
 		zd_rf.o zd_usb.o zd_util.o
 
 ifeq ($(CONFIG_ZD1211RW_DEBUG),y)
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 95b4a2a26707..5b624bfc01a6 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1253,6 +1253,9 @@ static int update_channel_integration_and_calibration(struct zd_chip *chip,
 {
 	int r;
 
+	if (!zd_rf_should_update_pwr_int(&chip->rf))
+		return 0;
+
 	r = update_pwr_int(chip, channel);
 	if (r)
 		return r;
@@ -1283,7 +1286,7 @@ static int patch_cck_gain(struct zd_chip *chip)
 	int r;
 	u32 value;
 
-	if (!chip->patch_cck_gain)
+	if (!chip->patch_cck_gain || !zd_rf_should_patch_cck_gain(&chip->rf))
 		return 0;
 
 	ZD_ASSERT(mutex_is_locked(&chip->mutex));
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index ce0a5f6da0d2..79d0288c193a 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -608,6 +608,9 @@ enum {
 #define CR_ZD1211B_TXOP			CTL_REG(0x0b20)
 #define CR_ZD1211B_RETRY_MAX		CTL_REG(0x0b28)
 
+/* Used to detect PLL lock */
+#define UW2453_INTR_REG			((zd_addr_t)0x85c1)
+
 #define CWIN_SIZE			0x007f043f
 
 
diff --git a/drivers/net/wireless/zd1211rw/zd_rf.c b/drivers/net/wireless/zd1211rw/zd_rf.c
index 549c23bcd6cc..7407409b60b1 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf.c
@@ -52,34 +52,38 @@ const char *zd_rf_name(u8 type)
 void zd_rf_init(struct zd_rf *rf)
 {
 	memset(rf, 0, sizeof(*rf));
+
+	/* default to update channel integration, as almost all RF's do want
+	 * this */
+	rf->update_channel_int = 1;
 }
 
 void zd_rf_clear(struct zd_rf *rf)
 {
+	if (rf->clear)
+		rf->clear(rf);
 	ZD_MEMCLEAR(rf, sizeof(*rf));
 }
 
 int zd_rf_init_hw(struct zd_rf *rf, u8 type)
 {
-	int r, t;
+	int r = 0;
+	int t;
 	struct zd_chip *chip = zd_rf_to_chip(rf);
 
 	ZD_ASSERT(mutex_is_locked(&chip->mutex));
 	switch (type) {
 	case RF2959_RF:
 		r = zd_rf_init_rf2959(rf);
-		if (r)
-			return r;
 		break;
 	case AL2230_RF:
 		r = zd_rf_init_al2230(rf);
-		if (r)
-			return r;
 		break;
 	case AL7230B_RF:
 		r = zd_rf_init_al7230b(rf);
-		if (r)
-			return r;
+		break;
+	case UW2453_RF:
+		r = zd_rf_init_uw2453(rf);
 		break;
 	default:
 		dev_err(zd_chip_dev(chip),
@@ -88,6 +92,9 @@ int zd_rf_init_hw(struct zd_rf *rf, u8 type)
 		return -ENODEV;
 	}
 
+	if (r)
+		return r;
+
 	rf->type = type;
 
 	r = zd_chip_lock_phy_regs(chip);
diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h
index aa9cc105ce60..c6dfd8227f6e 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf.h
+++ b/drivers/net/wireless/zd1211rw/zd_rf.h
@@ -48,12 +48,26 @@ struct zd_rf {
 
 	u8 channel;
 
+	/* whether channel integration and calibration should be updated
+	 * defaults to 1 (yes) */
+	u8 update_channel_int:1;
+
+	/* whether CR47 should be patched from the EEPROM, if the appropriate
+	 * flag is set in the POD. The vendor driver suggests that this should
+	 * be done for all RF's, but a bug in their code prevents but their
+	 * HW_OverWritePhyRegFromE2P() routine from ever taking effect. */
+	u8 patch_cck_gain:1;
+
+	/* private RF driver data */
+	void *priv;
+
 	/* RF-specific functions */
 	int (*init_hw)(struct zd_rf *rf);
 	int (*set_channel)(struct zd_rf *rf, u8 channel);
 	int (*switch_radio_on)(struct zd_rf *rf);
 	int (*switch_radio_off)(struct zd_rf *rf);
 	int (*patch_6m_band_edge)(struct zd_rf *rf, u8 channel);
+	void (*clear)(struct zd_rf *rf);
 };
 
 const char *zd_rf_name(u8 type);
@@ -71,10 +85,24 @@ int zd_switch_radio_off(struct zd_rf *rf);
 int zd_rf_patch_6m_band_edge(struct zd_rf *rf, u8 channel);
 int zd_rf_generic_patch_6m(struct zd_rf *rf, u8 channel);
 
+static inline int zd_rf_should_update_pwr_int(struct zd_rf *rf)
+{
+	return rf->update_channel_int;
+}
+
+static inline int zd_rf_should_patch_cck_gain(struct zd_rf *rf)
+{
+	return rf->patch_cck_gain;
+}
+
+int zd_rf_patch_6m_band_edge(struct zd_rf *rf, u8 channel);
+int zd_rf_generic_patch_6m(struct zd_rf *rf, u8 channel);
+
 /* Functions for individual RF chips */
 
 int zd_rf_init_rf2959(struct zd_rf *rf);
 int zd_rf_init_al2230(struct zd_rf *rf);
 int zd_rf_init_al7230b(struct zd_rf *rf);
+int zd_rf_init_uw2453(struct zd_rf *rf);
 
 #endif /* _ZD_RF_H */
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
index 511392acfedf..e7a4ecf7b6e2 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
@@ -432,5 +432,6 @@ int zd_rf_init_al2230(struct zd_rf *rf)
 		rf->switch_radio_on = zd1211_al2230_switch_radio_on;
 	}
 	rf->patch_6m_band_edge = zd_rf_generic_patch_6m;
+	rf->patch_cck_gain = 1;
 	return 0;
 }
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c b/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
index 5e5e9ddc6a74..f4e8b6ada854 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
@@ -483,6 +483,7 @@ int zd_rf_init_al7230b(struct zd_rf *rf)
 		rf->switch_radio_on = zd1211_al7230b_switch_radio_on;
 		rf->set_channel = zd1211_al7230b_set_channel;
 		rf->patch_6m_band_edge = zd_rf_generic_patch_6m;
+		rf->patch_cck_gain = 1;
 	}
 
 	rf->switch_radio_off = al7230b_switch_radio_off;
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
new file mode 100644
index 000000000000..414e40d571ab
--- /dev/null
+++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
@@ -0,0 +1,534 @@
+/* zd_rf_uw2453.c: Functions for the UW2453 RF controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+
+#include "zd_rf.h"
+#include "zd_usb.h"
+#include "zd_chip.h"
+
+/* This RF programming code is based upon the code found in v2.16.0.0 of the
+ * ZyDAS vendor driver. Unlike other RF's, Ubec publish full technical specs
+ * for this RF on their website, so we're able to understand more than
+ * usual as to what is going on. Thumbs up for Ubec for doing that. */
+
+/* The 3-wire serial interface provides access to 8 write-only registers.
+ * The data format is a 4 bit register address followed by a 20 bit value. */
+#define UW2453_REGWRITE(reg, val) ((((reg) & 0xf) << 20) | ((val) & 0xfffff))
+
+/* For channel tuning, we have to configure registers 1 (synthesizer), 2 (synth
+ * fractional divide ratio) and 3 (VCO config).
+ *
+ * We configure the RF to produce an interrupt when the PLL is locked onto
+ * the configured frequency. During initialization, we run through a variety
+ * of different VCO configurations on channel 1 until we detect a PLL lock.
+ * When this happens, we remember which VCO configuration produced the lock
+ * and use it later. Actually, we use the configuration *after* the one that
+ * produced the lock, which seems odd, but it works.
+ *
+ * If we do not see a PLL lock on any standard VCO config, we fall back on an
+ * autocal configuration, which has a fixed (as opposed to per-channel) VCO
+ * config and different synth values from the standard set (divide ratio
+ * is still shared with the standard set). */
+
+/* The per-channel synth values for all standard VCO configurations. These get
+ * written to register 1. */
+static const u8 uw2453_std_synth[] = {
+	RF_CHANNEL( 1) = 0x47,
+	RF_CHANNEL( 2) = 0x47,
+	RF_CHANNEL( 3) = 0x67,
+	RF_CHANNEL( 4) = 0x67,
+	RF_CHANNEL( 5) = 0x67,
+	RF_CHANNEL( 6) = 0x67,
+	RF_CHANNEL( 7) = 0x57,
+	RF_CHANNEL( 8) = 0x57,
+	RF_CHANNEL( 9) = 0x57,
+	RF_CHANNEL(10) = 0x57,
+	RF_CHANNEL(11) = 0x77,
+	RF_CHANNEL(12) = 0x77,
+	RF_CHANNEL(13) = 0x77,
+	RF_CHANNEL(14) = 0x4f,
+};
+
+/* This table stores the synthesizer fractional divide ratio for *all* VCO
+ * configurations (both standard and autocal). These get written to register 2.
+ */
+static const u16 uw2453_synth_divide[] = {
+	RF_CHANNEL( 1) = 0x999,
+	RF_CHANNEL( 2) = 0x99b,
+	RF_CHANNEL( 3) = 0x998,
+	RF_CHANNEL( 4) = 0x99a,
+	RF_CHANNEL( 5) = 0x999,
+	RF_CHANNEL( 6) = 0x99b,
+	RF_CHANNEL( 7) = 0x998,
+	RF_CHANNEL( 8) = 0x99a,
+	RF_CHANNEL( 9) = 0x999,
+	RF_CHANNEL(10) = 0x99b,
+	RF_CHANNEL(11) = 0x998,
+	RF_CHANNEL(12) = 0x99a,
+	RF_CHANNEL(13) = 0x999,
+	RF_CHANNEL(14) = 0xccc,
+};
+
+/* Here is the data for all the standard VCO configurations. We shrink our
+ * table a little by observing that both channels in a consecutive pair share
+ * the same value. We also observe that the high 4 bits ([0:3] in the specs)
+ * are all 'Reserved' and are always set to 0x4 - we chop them off in the data
+ * below. */
+#define CHAN_TO_PAIRIDX(a) ((a - 1) / 2)
+#define RF_CHANPAIR(a,b) [CHAN_TO_PAIRIDX(a)]
+static const u16 uw2453_std_vco_cfg[][7] = {
+	{ /* table 1 */
+		RF_CHANPAIR( 1,  2) = 0x664d,
+		RF_CHANPAIR( 3,  4) = 0x604d,
+		RF_CHANPAIR( 5,  6) = 0x6675,
+		RF_CHANPAIR( 7,  8) = 0x6475,
+		RF_CHANPAIR( 9, 10) = 0x6655,
+		RF_CHANPAIR(11, 12) = 0x6455,
+		RF_CHANPAIR(13, 14) = 0x6665,
+	},
+	{ /* table 2 */
+		RF_CHANPAIR( 1,  2) = 0x666d,
+		RF_CHANPAIR( 3,  4) = 0x606d,
+		RF_CHANPAIR( 5,  6) = 0x664d,
+		RF_CHANPAIR( 7,  8) = 0x644d,
+		RF_CHANPAIR( 9, 10) = 0x6675,
+		RF_CHANPAIR(11, 12) = 0x6475,
+		RF_CHANPAIR(13, 14) = 0x6655,
+	},
+	{ /* table 3 */
+		RF_CHANPAIR( 1,  2) = 0x665d,
+		RF_CHANPAIR( 3,  4) = 0x605d,
+		RF_CHANPAIR( 5,  6) = 0x666d,
+		RF_CHANPAIR( 7,  8) = 0x646d,
+		RF_CHANPAIR( 9, 10) = 0x664d,
+		RF_CHANPAIR(11, 12) = 0x644d,
+		RF_CHANPAIR(13, 14) = 0x6675,
+	},
+	{ /* table 4 */
+		RF_CHANPAIR( 1,  2) = 0x667d,
+		RF_CHANPAIR( 3,  4) = 0x607d,
+		RF_CHANPAIR( 5,  6) = 0x665d,
+		RF_CHANPAIR( 7,  8) = 0x645d,
+		RF_CHANPAIR( 9, 10) = 0x666d,
+		RF_CHANPAIR(11, 12) = 0x646d,
+		RF_CHANPAIR(13, 14) = 0x664d,
+	},
+	{ /* table 5 */
+		RF_CHANPAIR( 1,  2) = 0x6643,
+		RF_CHANPAIR( 3,  4) = 0x6043,
+		RF_CHANPAIR( 5,  6) = 0x667d,
+		RF_CHANPAIR( 7,  8) = 0x647d,
+		RF_CHANPAIR( 9, 10) = 0x665d,
+		RF_CHANPAIR(11, 12) = 0x645d,
+		RF_CHANPAIR(13, 14) = 0x666d,
+	},
+	{ /* table 6 */
+		RF_CHANPAIR( 1,  2) = 0x6663,
+		RF_CHANPAIR( 3,  4) = 0x6063,
+		RF_CHANPAIR( 5,  6) = 0x6643,
+		RF_CHANPAIR( 7,  8) = 0x6443,
+		RF_CHANPAIR( 9, 10) = 0x667d,
+		RF_CHANPAIR(11, 12) = 0x647d,
+		RF_CHANPAIR(13, 14) = 0x665d,
+	},
+	{ /* table 7 */
+		RF_CHANPAIR( 1,  2) = 0x6653,
+		RF_CHANPAIR( 3,  4) = 0x6053,
+		RF_CHANPAIR( 5,  6) = 0x6663,
+		RF_CHANPAIR( 7,  8) = 0x6463,
+		RF_CHANPAIR( 9, 10) = 0x6643,
+		RF_CHANPAIR(11, 12) = 0x6443,
+		RF_CHANPAIR(13, 14) = 0x667d,
+	},
+	{ /* table 8 */
+		RF_CHANPAIR( 1,  2) = 0x6673,
+		RF_CHANPAIR( 3,  4) = 0x6073,
+		RF_CHANPAIR( 5,  6) = 0x6653,
+		RF_CHANPAIR( 7,  8) = 0x6453,
+		RF_CHANPAIR( 9, 10) = 0x6663,
+		RF_CHANPAIR(11, 12) = 0x6463,
+		RF_CHANPAIR(13, 14) = 0x6643,
+	},
+	{ /* table 9 */
+		RF_CHANPAIR( 1,  2) = 0x664b,
+		RF_CHANPAIR( 3,  4) = 0x604b,
+		RF_CHANPAIR( 5,  6) = 0x6673,
+		RF_CHANPAIR( 7,  8) = 0x6473,
+		RF_CHANPAIR( 9, 10) = 0x6653,
+		RF_CHANPAIR(11, 12) = 0x6453,
+		RF_CHANPAIR(13, 14) = 0x6663,
+	},
+	{ /* table 10 */
+		RF_CHANPAIR( 1,  2) = 0x666b,
+		RF_CHANPAIR( 3,  4) = 0x606b,
+		RF_CHANPAIR( 5,  6) = 0x664b,
+		RF_CHANPAIR( 7,  8) = 0x644b,
+		RF_CHANPAIR( 9, 10) = 0x6673,
+		RF_CHANPAIR(11, 12) = 0x6473,
+		RF_CHANPAIR(13, 14) = 0x6653,
+	},
+	{ /* table 11 */
+		RF_CHANPAIR( 1,  2) = 0x665b,
+		RF_CHANPAIR( 3,  4) = 0x605b,
+		RF_CHANPAIR( 5,  6) = 0x666b,
+		RF_CHANPAIR( 7,  8) = 0x646b,
+		RF_CHANPAIR( 9, 10) = 0x664b,
+		RF_CHANPAIR(11, 12) = 0x644b,
+		RF_CHANPAIR(13, 14) = 0x6673,
+	},
+
+};
+
+/* The per-channel synth values for autocal. These get written to register 1. */
+static const u16 uw2453_autocal_synth[] = {
+	RF_CHANNEL( 1) = 0x6847,
+	RF_CHANNEL( 2) = 0x6847,
+	RF_CHANNEL( 3) = 0x6867,
+	RF_CHANNEL( 4) = 0x6867,
+	RF_CHANNEL( 5) = 0x6867,
+	RF_CHANNEL( 6) = 0x6867,
+	RF_CHANNEL( 7) = 0x6857,
+	RF_CHANNEL( 8) = 0x6857,
+	RF_CHANNEL( 9) = 0x6857,
+	RF_CHANNEL(10) = 0x6857,
+	RF_CHANNEL(11) = 0x6877,
+	RF_CHANNEL(12) = 0x6877,
+	RF_CHANNEL(13) = 0x6877,
+	RF_CHANNEL(14) = 0x684f,
+};
+
+/* The VCO configuration for autocal (all channels) */
+static const u16 UW2453_AUTOCAL_VCO_CFG = 0x6662;
+
+/* TX gain settings. The array index corresponds to the TX power integration
+ * values found in the EEPROM. The values get written to register 7. */
+static u32 uw2453_txgain[] = {
+	[0x00] = 0x0e313,
+	[0x01] = 0x0fb13,
+	[0x02] = 0x0e093,
+	[0x03] = 0x0f893,
+	[0x04] = 0x0ea93,
+	[0x05] = 0x1f093,
+	[0x06] = 0x1f493,
+	[0x07] = 0x1f693,
+	[0x08] = 0x1f393,
+	[0x09] = 0x1f35b,
+	[0x0a] = 0x1e6db,
+	[0x0b] = 0x1ff3f,
+	[0x0c] = 0x1ffff,
+	[0x0d] = 0x361d7,
+	[0x0e] = 0x37fbf,
+	[0x0f] = 0x3ff8b,
+	[0x10] = 0x3ff33,
+	[0x11] = 0x3fb3f,
+	[0x12] = 0x3ffff,
+};
+
+/* RF-specific structure */
+struct uw2453_priv {
+	/* index into synth/VCO config tables where PLL lock was found
+	 * -1 means autocal */
+	int config;
+};
+
+#define UW2453_PRIV(rf) ((struct uw2453_priv *) (rf)->priv)
+
+static int uw2453_synth_set_channel(struct zd_chip *chip, int channel,
+	bool autocal)
+{
+	int r;
+	int idx = channel - 1;
+	u32 val;
+
+	if (autocal)
+		val = UW2453_REGWRITE(1, uw2453_autocal_synth[idx]);
+	else
+		val = UW2453_REGWRITE(1, uw2453_std_synth[idx]);
+
+	r = zd_rfwrite_locked(chip, val, RF_RV_BITS);
+	if (r)
+		return r;
+
+	return zd_rfwrite_locked(chip,
+		UW2453_REGWRITE(2, uw2453_synth_divide[idx]), RF_RV_BITS);
+}
+
+static int uw2453_write_vco_cfg(struct zd_chip *chip, u16 value)
+{
+	/* vendor driver always sets these upper bits even though the specs say
+	 * they are reserved */
+	u32 val = 0x40000 | value;
+	return zd_rfwrite_locked(chip, UW2453_REGWRITE(3, val), RF_RV_BITS);
+}
+
+static int uw2453_init_mode(struct zd_chip *chip)
+{
+	static const u32 rv[] = {
+		UW2453_REGWRITE(0, 0x25f98), /* enter IDLE mode */
+		UW2453_REGWRITE(0, 0x25f9a), /* enter CAL_VCO mode */
+		UW2453_REGWRITE(0, 0x25f94), /* enter RX/TX mode */
+		UW2453_REGWRITE(0, 0x27fd4), /* power down RSSI circuit */
+	};
+
+	return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
+}
+
+static int uw2453_set_tx_gain_level(struct zd_chip *chip, int channel)
+{
+	u8 int_value = chip->pwr_int_values[channel - 1];
+
+	if (int_value >= ARRAY_SIZE(uw2453_txgain)) {
+		dev_dbg_f(zd_chip_dev(chip), "can't configure TX gain for "
+			  "int value %x on channel %d\n", int_value, channel);
+		return 0;
+	}
+
+	return zd_rfwrite_locked(chip,
+		UW2453_REGWRITE(7, uw2453_txgain[int_value]), RF_RV_BITS);
+}
+
+static int uw2453_init_hw(struct zd_rf *rf)
+{
+	int i, r;
+	int found_config = -1;
+	u16 intr_status;
+	struct zd_chip *chip = zd_rf_to_chip(rf);
+
+	static const struct zd_ioreq16 ioreqs[] = {
+		{ CR10,  0x89 }, { CR15,  0x20 },
+		{ CR17,  0x28 }, /* 6112 no change */
+		{ CR23,  0x38 }, { CR24,  0x20 }, { CR26,  0x93 },
+		{ CR27,  0x15 }, { CR28,  0x3e }, { CR29,  0x00 },
+		{ CR33,  0x28 }, { CR34,  0x30 },
+		{ CR35,  0x43 }, /* 6112 3e->43 */
+		{ CR41,  0x24 }, { CR44,  0x32 },
+		{ CR46,  0x92 }, /* 6112 96->92 */
+		{ CR47,  0x1e },
+		{ CR48,  0x04 }, /* 5602 Roger */
+		{ CR49,  0xfa }, { CR79,  0x58 }, { CR80,  0x30 },
+		{ CR81,  0x30 }, { CR87,  0x0a }, { CR89,  0x04 },
+		{ CR91,  0x00 }, { CR92,  0x0a }, { CR98,  0x8d },
+		{ CR99,  0x28 }, { CR100, 0x02 },
+		{ CR101, 0x09 }, /* 6112 13->1f 6220 1f->13 6407 13->9 */
+		{ CR102, 0x27 },
+		{ CR106, 0x1c }, /* 5d07 5112 1f->1c 6220 1c->1f 6221 1f->1c */
+		{ CR107, 0x1c }, /* 6220 1c->1a 5221 1a->1c */
+		{ CR109, 0x13 },
+		{ CR110, 0x1f }, /* 6112 13->1f 6221 1f->13 6407 13->0x09 */
+		{ CR111, 0x13 }, { CR112, 0x1f }, { CR113, 0x27 },
+		{ CR114, 0x23 }, /* 6221 27->23 */
+		{ CR115, 0x24 }, /* 6112 24->1c 6220 1c->24 */
+		{ CR116, 0x24 }, /* 6220 1c->24 */
+		{ CR117, 0xfa }, /* 6112 fa->f8 6220 f8->f4 6220 f4->fa */
+		{ CR118, 0xf0 }, /* 5d07 6112 f0->f2 6220 f2->f0 */
+		{ CR119, 0x1a }, /* 6112 1a->10 6220 10->14 6220 14->1a */
+		{ CR120, 0x4f },
+		{ CR121, 0x1f }, /* 6220 4f->1f */
+		{ CR122, 0xf0 }, { CR123, 0x57 }, { CR125, 0xad },
+		{ CR126, 0x6c }, { CR127, 0x03 },
+		{ CR128, 0x14 }, /* 6302 12->11 */
+		{ CR129, 0x12 }, /* 6301 10->0f */
+		{ CR130, 0x10 }, { CR137, 0x50 }, { CR138, 0xa8 },
+		{ CR144, 0xac }, { CR146, 0x20 }, { CR252, 0xff },
+		{ CR253, 0xff },
+	};
+
+	static const u32 rv[] = {
+		UW2453_REGWRITE(4, 0x2b),    /* configure reciever gain */
+		UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */
+		UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */
+		UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */
+
+		/* enter CAL_FIL mode, TX gain set by registers, RX gain set by pins,
+		 * RSSI circuit powered down, reduced RSSI range */
+		UW2453_REGWRITE(0, 0x25f9c), /* 5d01 cal_fil */
+
+		/* synthesizer configuration for channel 1 */
+		UW2453_REGWRITE(1, 0x47),
+		UW2453_REGWRITE(2, 0x999),
+
+		/* disable manual VCO band selection */
+		UW2453_REGWRITE(3, 0x7602),
+
+		/* enable manual VCO band selection, configure current level */
+		UW2453_REGWRITE(3, 0x46063),
+	};
+
+	r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+	if (r)
+		return r;
+
+	r = zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
+	if (r)
+		return r;
+
+	r = uw2453_init_mode(chip);
+	if (r)
+		return r;
+
+	/* Try all standard VCO configuration settings on channel 1 */
+	for (i = 0; i < ARRAY_SIZE(uw2453_std_vco_cfg) - 1; i++) {
+		/* Configure synthesizer for channel 1 */
+		r = uw2453_synth_set_channel(chip, 1, false);
+		if (r)
+			return r;
+
+		/* Write VCO config */
+		r = uw2453_write_vco_cfg(chip, uw2453_std_vco_cfg[i][0]);
+		if (r)
+			return r;
+
+		/* ack interrupt event */
+		r = zd_iowrite16_locked(chip, 0x0f, UW2453_INTR_REG);
+		if (r)
+			return r;
+
+		/* check interrupt status */
+		r = zd_ioread16_locked(chip, &intr_status, UW2453_INTR_REG);
+		if (r)
+			return r;
+
+		if (!intr_status & 0xf) {
+			dev_dbg_f(zd_chip_dev(chip),
+				"PLL locked on configuration %d\n", i);
+			found_config = i;
+			break;
+		}
+	}
+
+	if (found_config == -1) {
+		/* autocal */
+		dev_dbg_f(zd_chip_dev(chip),
+			"PLL did not lock, using autocal\n");
+
+		r = uw2453_synth_set_channel(chip, 1, true);
+		if (r)
+			return r;
+
+		r = uw2453_write_vco_cfg(chip, UW2453_AUTOCAL_VCO_CFG);
+		if (r)
+			return r;
+	}
+
+	/* To match the vendor driver behaviour, we use the configuration after
+	 * the one that produced a lock. */
+	UW2453_PRIV(rf)->config = found_config + 1;
+
+	return zd_iowrite16_locked(chip, 0x06, CR203);
+}
+
+static int uw2453_set_channel(struct zd_rf *rf, u8 channel)
+{
+	int r;
+	u16 vco_cfg;
+	int config = UW2453_PRIV(rf)->config;
+	bool autocal = (config == -1);
+	struct zd_chip *chip = zd_rf_to_chip(rf);
+
+	static const struct zd_ioreq16 ioreqs[] = {
+		{ CR80,  0x30 }, { CR81,  0x30 }, { CR79,  0x58 },
+		{ CR12,  0xf0 }, { CR77,  0x1b }, { CR78,  0x58 },
+	};
+
+	r = uw2453_synth_set_channel(chip, channel, autocal);
+	if (r)
+		return r;
+
+	if (autocal)
+		vco_cfg = UW2453_AUTOCAL_VCO_CFG;
+	else
+		vco_cfg = uw2453_std_vco_cfg[config][CHAN_TO_PAIRIDX(channel)];
+
+	r = uw2453_write_vco_cfg(chip, vco_cfg);
+	if (r)
+		return r;
+
+	r = uw2453_init_mode(chip);
+	if (r)
+		return r;
+
+	r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+	if (r)
+		return r;
+
+	r = uw2453_set_tx_gain_level(chip, channel);
+	if (r)
+		return r;
+
+	return zd_iowrite16_locked(chip, 0x06, CR203);
+}
+
+static int uw2453_switch_radio_on(struct zd_rf *rf)
+{
+	int r;
+	struct zd_chip *chip = zd_rf_to_chip(rf);
+	struct zd_ioreq16 ioreqs[] = {
+		{ CR11,  0x00 }, { CR251, 0x3f },
+	};
+
+	/* enter RXTX mode */
+	r = zd_rfwrite_locked(chip, UW2453_REGWRITE(0, 0x25f94), RF_RV_BITS);
+	if (r)
+		return r;
+
+	if (chip->is_zd1211b)
+		ioreqs[1].value = 0x7f;
+
+	return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+}
+
+static int uw2453_switch_radio_off(struct zd_rf *rf)
+{
+	int r;
+	struct zd_chip *chip = zd_rf_to_chip(rf);
+	static const struct zd_ioreq16 ioreqs[] = {
+		{ CR11,  0x04 }, { CR251, 0x2f },
+	};
+
+	/* enter IDLE mode */
+	/* FIXME: shouldn't we go to SLEEP? sent email to zydas */
+	r = zd_rfwrite_locked(chip, UW2453_REGWRITE(0, 0x25f90), RF_RV_BITS);
+	if (r)
+		return r;
+
+	return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+}
+
+static void uw2453_clear(struct zd_rf *rf)
+{
+	kfree(rf->priv);
+}
+
+int zd_rf_init_uw2453(struct zd_rf *rf)
+{
+	rf->init_hw = uw2453_init_hw;
+	rf->set_channel = uw2453_set_channel;
+	rf->switch_radio_on = uw2453_switch_radio_on;
+	rf->switch_radio_off = uw2453_switch_radio_off;
+	rf->patch_6m_band_edge = zd_rf_generic_patch_6m;
+	rf->clear = uw2453_clear;
+	/* we have our own TX integration code */
+	rf->update_channel_int = 0;
+
+	rf->priv = kmalloc(sizeof(struct uw2453_priv), GFP_KERNEL);
+	if (rf->priv == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 8459549d0cee..740a2194fdde 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -54,6 +54,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 },
+	{ USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
 	/* ZD1211B */
 	{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index f2a90a7fa2d6..870c5393c21a 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -1137,7 +1137,7 @@ static int yellowfin_rx(struct net_device *dev)
 				if (skb == NULL)
 					break;
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
-				eth_copy_and_sum(skb, rx_skb->data, pkt_len, 0);
+				skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
 				skb_put(skb, pkt_len);
 				pci_dma_sync_single_for_device(yp->pci_dev, desc->addr,
 											   yp->rx_buf_sz,
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 924ef0609460..fc4bde259dc7 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -121,14 +121,14 @@ struct pdcspath_entry pdcspath_entry_##_name = { \
 
 #define PDCS_ATTR(_name, _mode, _show, _store) \
 struct subsys_attribute pdcs_attr_##_name = { \
-	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.attr = {.name = __stringify(_name), .mode = _mode}, \
 	.show = _show, \
 	.store = _store, \
 };
 
 #define PATHS_ATTR(_name, _mode, _show, _store) \
 struct pdcspath_attribute paths_attr_##_name = { \
-	.attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+	.attr = {.name = __stringify(_name), .mode = _mode}, \
 	.show = _show, \
 	.store = _store, \
 };
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index e3beb784406f..006054a40995 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -41,9 +41,7 @@ obj-$(CONFIG_ACPI)    += pci-acpi.o
 # Cardbus & CompactPCI use setup-bus
 obj-$(CONFIG_HOTPLUG) += setup-bus.o
 
-ifndef CONFIG_X86
-obj-y += syscall.o
-endif
+obj-$(CONFIG_PCI_SYSCALL) += syscall.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index ddbadd95387e..f6cc0c5b5657 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -211,6 +211,7 @@ typedef int (*acpiphp_callback)(struct acpiphp_slot *slot, void *data);
 
 extern int acpiphp_enable_slot (struct acpiphp_slot *slot);
 extern int acpiphp_disable_slot (struct acpiphp_slot *slot);
+extern int acpiphp_eject_slot (struct acpiphp_slot *slot);
 extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot);
 extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot);
 extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot);
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index fa5c0197d571..a0ca63adad5a 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -156,11 +156,15 @@ static int enable_slot(struct hotplug_slot *hotplug_slot)
 static int disable_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
+	int retval;
 
 	dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
 
 	/* disable the specified slot */
-	return acpiphp_disable_slot(slot->acpi_slot);
+	retval = acpiphp_disable_slot(slot->acpi_slot);
+	if (!retval)
+		retval = acpiphp_eject_slot(slot->acpi_slot);
+	return retval;
 }
 
 
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 9ef4e989afc4..1e125b56c9a9 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1282,7 +1282,7 @@ static unsigned int get_slot_status(struct acpiphp_slot *slot)
 /**
  * acpiphp_eject_slot - physically eject the slot
  */
-static int acpiphp_eject_slot(struct acpiphp_slot *slot)
+int acpiphp_eject_slot(struct acpiphp_slot *slot)
 {
 	acpi_status status;
 	struct acpiphp_func *func;
@@ -1368,6 +1368,9 @@ static void program_hpp(struct pci_dev *dev, struct acpiphp_bridge *bridge)
 			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
 		return;
 
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
+		return;
+
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
 			bridge->hpp.t0->cache_line_size);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER,
@@ -1502,6 +1505,37 @@ static void handle_bridge_insertion(acpi_handle handle, u32 type)
  * ACPI event handlers
  */
 
+static acpi_status
+count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	int *count = (int *)context;
+	struct acpiphp_bridge *bridge;
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (bridge)
+		(*count)++;
+	return AE_OK ;
+}
+
+static acpi_status
+check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+	struct acpiphp_bridge *bridge;
+	char objname[64];
+	struct acpi_buffer buffer = { .length = sizeof(objname),
+				      .pointer = objname };
+
+	bridge = acpiphp_handle_to_bridge(handle);
+	if (bridge) {
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+		dbg("%s: re-enumerating slots under %s\n",
+			__FUNCTION__, objname);
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+		acpiphp_check_bridge(bridge);
+	}
+	return AE_OK ;
+}
+
 /**
  * handle_hotplug_event_bridge - handle ACPI event on bridges
  *
@@ -1519,6 +1553,7 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
 	struct acpi_buffer buffer = { .length = sizeof(objname),
 				      .pointer = objname };
 	struct acpi_device *device;
+	int num_sub_bridges = 0;
 
 	if (acpi_bus_get_device(handle, &device)) {
 		/* This bridge must have just been physically inserted */
@@ -1527,7 +1562,12 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
 	}
 
 	bridge = acpiphp_handle_to_bridge(handle);
-	if (!bridge) {
+	if (type == ACPI_NOTIFY_BUS_CHECK) {
+		acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX,
+			count_sub_bridges, &num_sub_bridges, NULL);
+	}
+
+	if (!bridge && !num_sub_bridges) {
 		err("cannot get bridge info\n");
 		return;
 	}
@@ -1538,7 +1578,14 @@ static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *cont
 	case ACPI_NOTIFY_BUS_CHECK:
 		/* bus re-enumerate */
 		dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname);
-		acpiphp_check_bridge(bridge);
+		if (bridge) {
+			dbg("%s: re-enumerating slots under %s\n",
+				__FUNCTION__, objname);
+			acpiphp_check_bridge(bridge);
+		}
+		if (num_sub_bridges)
+			acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+				ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL);
 		break;
 
 	case ACPI_NOTIFY_DEVICE_CHECK:
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index e7322c25d377..70db38c0ced9 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -106,7 +106,8 @@ static int ibm_get_attention_status(struct hotplug_slot *slot, u8 *status);
 static void ibm_handle_events(acpi_handle handle, u32 event, void *context);
 static int ibm_get_table_from_acpi(char **bufp);
 static ssize_t ibm_read_apci_table(struct kobject *kobj,
-		char *buffer, loff_t pos, size_t size);
+				   struct bin_attribute *bin_attr,
+				   char *buffer, loff_t pos, size_t size);
 static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
 		u32 lvl, void *context, void **rv);
 static int __init ibm_acpiphp_init(void);
@@ -117,7 +118,6 @@ static struct notification ibm_note;
 static struct bin_attribute ibm_apci_table_attr = {
 	    .attr = {
 		    .name = "apci_table",
-		    .owner = THIS_MODULE,
 		    .mode = S_IRUGO,
 	    },
 	    .read = ibm_read_apci_table,
@@ -358,7 +358,8 @@ read_table_done:
  * our solution is to only allow reading the table in all at once
  **/
 static ssize_t ibm_read_apci_table(struct kobject *kobj,
-		char *buffer, loff_t pos, size_t size)
+				   struct bin_attribute *bin_attr,
+				   char *buffer, loff_t pos, size_t size)
 {
 	int bytes_read = -EINVAL;
 	char *table = NULL;
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 684551559d44..ed4d44e3332c 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -35,6 +35,7 @@
 #include <linux/smp_lock.h>
 #include <asm/atomic.h>
 #include <linux/delay.h>
+#include <linux/kthread.h>
 #include "cpci_hotplug.h"
 
 #define DRIVER_AUTHOR	"Scott Murray <scottm@somanetworks.com>"
@@ -59,9 +60,8 @@ static int slots;
 static atomic_t extracting;
 int cpci_debug;
 static struct cpci_hp_controller *controller;
-static struct semaphore event_semaphore;	/* mutex for process loop (up if something to process) */
-static struct semaphore thread_exit;		/* guard ensure thread has exited before calling it quits */
-static int thread_finished = 1;
+static struct task_struct *cpci_thread;
+static int thread_finished;
 
 static int enable_slot(struct hotplug_slot *slot);
 static int disable_slot(struct hotplug_slot *slot);
@@ -357,9 +357,7 @@ cpci_hp_intr(int irq, void *data)
 	controller->ops->disable_irq();
 
 	/* Trigger processing by the event thread */
-	dbg("Signal event_semaphore");
-	up(&event_semaphore);
-	dbg("exited cpci_hp_intr");
+	wake_up_process(cpci_thread);
 	return IRQ_HANDLED;
 }
 
@@ -521,17 +519,12 @@ event_thread(void *data)
 {
 	int rc;
 
-	lock_kernel();
-	daemonize("cpci_hp_eventd");
-	unlock_kernel();
-
 	dbg("%s - event thread started", __FUNCTION__);
 	while (1) {
 		dbg("event thread sleeping");
-		down_interruptible(&event_semaphore);
-		dbg("event thread woken, thread_finished = %d",
-		    thread_finished);
-		if (thread_finished || signal_pending(current))
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
+		if (kthread_should_stop())
 			break;
 		do {
 			rc = check_slots();
@@ -541,18 +534,17 @@ event_thread(void *data)
 			} else if (rc < 0) {
 				dbg("%s - error checking slots", __FUNCTION__);
 				thread_finished = 1;
-				break;
+				goto out;
 			}
-		} while (atomic_read(&extracting) && !thread_finished);
-		if (thread_finished)
+		} while (atomic_read(&extracting) && !kthread_should_stop());
+		if (kthread_should_stop())
 			break;
 
 		/* Re-enable ENUM# interrupt */
 		dbg("%s - re-enabling irq", __FUNCTION__);
 		controller->ops->enable_irq();
 	}
-	dbg("%s - event thread signals exit", __FUNCTION__);
-	up(&thread_exit);
+ out:
 	return 0;
 }
 
@@ -562,12 +554,8 @@ poll_thread(void *data)
 {
 	int rc;
 
-	lock_kernel();
-	daemonize("cpci_hp_polld");
-	unlock_kernel();
-
 	while (1) {
-		if (thread_finished || signal_pending(current))
+		if (kthread_should_stop() || signal_pending(current))
 			break;
 		if (controller->ops->query_enum()) {
 			do {
@@ -578,48 +566,36 @@ poll_thread(void *data)
 				} else if (rc < 0) {
 					dbg("%s - error checking slots", __FUNCTION__);
 					thread_finished = 1;
-					break;
+					goto out;
 				}
-			} while (atomic_read(&extracting) && !thread_finished);
+			} while (atomic_read(&extracting) && !kthread_should_stop());
 		}
 		msleep(100);
 	}
-	dbg("poll thread signals exit");
-	up(&thread_exit);
+ out:
 	return 0;
 }
 
 static int
 cpci_start_thread(void)
 {
-	int pid;
-
-	/* initialize our semaphores */
-	init_MUTEX_LOCKED(&event_semaphore);
-	init_MUTEX_LOCKED(&thread_exit);
-	thread_finished = 0;
-
 	if (controller->irq)
-		pid = kernel_thread(event_thread, NULL, 0);
+		cpci_thread = kthread_run(event_thread, NULL, "cpci_hp_eventd");
 	else
-		pid = kernel_thread(poll_thread, NULL, 0);
-	if (pid < 0) {
+		cpci_thread = kthread_run(poll_thread, NULL, "cpci_hp_polld");
+	if (IS_ERR(cpci_thread)) {
 		err("Can't start up our thread");
-		return -1;
+		return PTR_ERR(cpci_thread);
 	}
-	dbg("Our thread pid = %d", pid);
+	thread_finished = 0;
 	return 0;
 }
 
 static void
 cpci_stop_thread(void)
 {
+	kthread_stop(cpci_thread);
 	thread_finished = 1;
-	dbg("thread finish command given");
-	if (controller->irq)
-		up(&event_semaphore);
-	dbg("wait for thread to exit");
-	down(&thread_exit);
 }
 
 int
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 7b1beaad2752..5e9be44817cb 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -45,8 +45,6 @@ extern int cpci_debug;
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
 
-#define ROUND_UP(x, a)		(((x) + (a) - 1) & ~((a) - 1))
-
 
 u8 cpci_get_attention_status(struct slot* slot)
 {
diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c
index 5617cfdadc5c..d590a99930fa 100644
--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -796,7 +796,6 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	u8 num_of_slots = 0;
 	u8 hp_slot = 0;
 	u8 device;
-	u8 rev;
 	u8 bus_cap;
 	u16 temp_word;
 	u16 vendor_id;
@@ -823,9 +822,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 	dbg("Vendor ID: %x\n", vendor_id);
 
-	rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-	dbg("revision: %d\n", rev);
-	if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
+	dbg("revision: %d\n", pdev->revision);
+	if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) {
 		err(msg_HPC_rev_error);
 		rc = -ENODEV;
 		goto err_disable_device;
@@ -836,7 +834,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * For Intel, each SSID bit identifies a PHP capability.
 	 * Also Intel HPC's may have RID=0.
 	 */
-	if ((rev > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
+	if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
 		// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
 		rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
 		if (rc) {
@@ -870,7 +868,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		switch (subsystem_vid) {
 			case PCI_VENDOR_ID_COMPAQ:
-				if (rev >= 0x13) { /* CIOBX */
+				if (pdev->revision >= 0x13) { /* CIOBX */
 					ctrl->push_flag = 1;
 					ctrl->slot_switch_type = 1;
 					ctrl->push_button = 1;
@@ -1075,7 +1073,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memcpy(ctrl->pci_bus, pdev->bus, sizeof(*ctrl->pci_bus));
 
 	ctrl->bus = pdev->bus->number;
-	ctrl->rev = rev;
+	ctrl->rev = pdev->revision;
 	dbg("bus device function rev: %d %d %d %d\n", ctrl->bus,
 		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev);
 
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index ccc57627201e..7959c222dc24 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -103,6 +103,7 @@ struct controller {
 	u8 cap_base;
 	struct timer_list poll_timer;
 	volatile int cmd_busy;
+	spinlock_t lock;
 };
 
 #define INT_BUTTON_IGNORE		0
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 7f22caa70178..98e541ffef3d 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -197,6 +197,12 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot)
 			    __FUNCTION__);
 			return;
 		}
+		/*
+		 * After turning power off, we must wait for at least
+		 * 1 second before taking any action that relies on
+		 * power having been removed from the slot/adapter.
+		 */
+		msleep(1000);
 	}
 }
 
@@ -615,6 +621,12 @@ int pciehp_disable_slot(struct slot *p_slot)
 			mutex_unlock(&p_slot->ctrl->crit_sect);
 			return -EINVAL;
 		}
+		/*
+		 * After turning power off, we must wait for at least
+		 * 1 second before taking any action that relies on
+		 * power having been removed from the slot/adapter.
+		 */
+		msleep(1000);
 	}
 
 	ret = remove_board(p_slot);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 9aac6a87eb53..016eea94a8a5 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -275,11 +275,19 @@ static inline int pcie_wait_cmd(struct controller *ctrl)
 	return retval;
 }
 
-static int pcie_write_cmd(struct slot *slot, u16 cmd)
+/**
+ * pcie_write_cmd - Issue controller command
+ * @slot: slot to which the command is issued
+ * @cmd:  command value written to slot control register
+ * @mask: bitmask of slot control register to be modified
+ */
+static int pcie_write_cmd(struct slot *slot, u16 cmd, u16 mask)
 {
 	struct controller *ctrl = slot->ctrl;
 	int retval = 0;
 	u16 slot_status;
+	u16 slot_ctrl;
+	unsigned long flags;
 
 	DBG_ENTER_ROUTINE 
 
@@ -299,17 +307,29 @@ static int pcie_write_cmd(struct slot *slot, u16 cmd)
 		    __FUNCTION__);
 	}
 
-	ctrl->cmd_busy = 1;
-	retval = pciehp_writew(ctrl, SLOTCTRL, (cmd | CMD_CMPL_INTR_ENABLE));
+	spin_lock_irqsave(&ctrl->lock, flags);
+	retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
 	if (retval) {
-		err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
-		goto out;
+		err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
+		goto out_spin_unlock;
 	}
 
+	slot_ctrl &= ~mask;
+	slot_ctrl |= ((cmd & mask) | CMD_CMPL_INTR_ENABLE);
+
+	ctrl->cmd_busy = 1;
+	retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
+	if (retval)
+		err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
+
+ out_spin_unlock:
+	spin_unlock_irqrestore(&ctrl->lock, flags);
+
 	/*
 	 * Wait for command completion.
 	 */
-	retval = pcie_wait_cmd(ctrl);
+	if (!retval)
+		retval = pcie_wait_cmd(ctrl);
  out:
 	mutex_unlock(&ctrl->ctrl_lock);
 	DBG_LEAVE_ROUTINE 
@@ -502,25 +522,20 @@ static int hpc_get_emi_status(struct slot *slot, u8 *status)
 
 static int hpc_toggle_emi(struct slot *slot)
 {
-	struct controller *ctrl = slot->ctrl;
-	u16 slot_cmd = 0;
-	u16 slot_ctrl;
-	int rc = 0;
+	u16 slot_cmd;
+	u16 cmd_mask;
+	int rc;
 
 	DBG_ENTER_ROUTINE
 
-	rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
-	if (rc) {
-		err("%s : hp_register_read_word SLOT_CTRL failed\n",
-			__FUNCTION__);
-		return rc;
-	}
-
-	slot_cmd = (slot_ctrl | EMI_CTRL);
-	if (!pciehp_poll_mode)
+	slot_cmd = EMI_CTRL;
+	cmd_mask = EMI_CTRL;
+	if (!pciehp_poll_mode) {
 		slot_cmd = slot_cmd | HP_INTR_ENABLE;
+		cmd_mask = cmd_mask | HP_INTR_ENABLE;
+	}
 
-	pcie_write_cmd(slot, slot_cmd);
+	rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
 	slot->last_emi_toggle = get_seconds();
 	DBG_LEAVE_ROUTINE
 	return rc;
@@ -529,35 +544,32 @@ static int hpc_toggle_emi(struct slot *slot)
 static int hpc_set_attention_status(struct slot *slot, u8 value)
 {
 	struct controller *ctrl = slot->ctrl;
-	u16 slot_cmd = 0;
-	u16 slot_ctrl;
-	int rc = 0;
+	u16 slot_cmd;
+	u16 cmd_mask;
+	int rc;
 
 	DBG_ENTER_ROUTINE
 
-	rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
-	if (rc) {
-		err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
-		return rc;
-	}
-
+	cmd_mask = ATTN_LED_CTRL;
 	switch (value) {
 		case 0 :	/* turn off */
-			slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x00C0;
+			slot_cmd = 0x00C0;
 			break;
 		case 1:		/* turn on */
-			slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0040;
+			slot_cmd = 0x0040;
 			break;
 		case 2:		/* turn blink */
-			slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0080;
+			slot_cmd = 0x0080;
 			break;
 		default:
 			return -1;
 	}
-	if (!pciehp_poll_mode)
-		slot_cmd = slot_cmd | HP_INTR_ENABLE; 
+	if (!pciehp_poll_mode) {
+		slot_cmd = slot_cmd | HP_INTR_ENABLE;
+		cmd_mask = cmd_mask | HP_INTR_ENABLE;
+	}
 
-	pcie_write_cmd(slot, slot_cmd);
+	rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
 	dbg("%s: SLOTCTRL %x write cmd %x\n",
 	    __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
 	
@@ -570,21 +582,18 @@ static void hpc_set_green_led_on(struct slot *slot)
 {
 	struct controller *ctrl = slot->ctrl;
 	u16 slot_cmd;
-	u16 slot_ctrl;
-	int rc = 0;
+	u16 cmd_mask;
        	
 	DBG_ENTER_ROUTINE
 
-	rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
-	if (rc) {
-		err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
-		return;
+	slot_cmd = 0x0100;
+	cmd_mask = PWR_LED_CTRL;
+	if (!pciehp_poll_mode) {
+		slot_cmd = slot_cmd | HP_INTR_ENABLE;
+		cmd_mask = cmd_mask | HP_INTR_ENABLE;
 	}
-	slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0100;
-	if (!pciehp_poll_mode)
-		slot_cmd = slot_cmd | HP_INTR_ENABLE; 
 
-	pcie_write_cmd(slot, slot_cmd);
+	pcie_write_cmd(slot, slot_cmd, cmd_mask);
 
 	dbg("%s: SLOTCTRL %x write cmd %x\n",
 	    __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@@ -596,22 +605,18 @@ static void hpc_set_green_led_off(struct slot *slot)
 {
 	struct controller *ctrl = slot->ctrl;
 	u16 slot_cmd;
-	u16 slot_ctrl;
-	int rc = 0;
+	u16 cmd_mask;
 
 	DBG_ENTER_ROUTINE
 
-	rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
-	if (rc) {
-		err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
-		return;
+	slot_cmd = 0x0300;
+	cmd_mask = PWR_LED_CTRL;
+	if (!pciehp_poll_mode) {
+		slot_cmd = slot_cmd | HP_INTR_ENABLE;
+		cmd_mask = cmd_mask | HP_INTR_ENABLE;
 	}
 
-	slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0300;
-
-	if (!pciehp_poll_mode)
-		slot_cmd = slot_cmd | HP_INTR_ENABLE; 
-	pcie_write_cmd(slot, slot_cmd);
+	pcie_write_cmd(slot, slot_cmd, cmd_mask);
 	dbg("%s: SLOTCTRL %x write cmd %x\n",
 	    __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
 
@@ -623,22 +628,18 @@ static void hpc_set_green_led_blink(struct slot *slot)
 {
 	struct controller *ctrl = slot->ctrl;
 	u16 slot_cmd;
-	u16 slot_ctrl;
-	int rc = 0; 
+	u16 cmd_mask;
 	
 	DBG_ENTER_ROUTINE
 
-	rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
-	if (rc) {
-		err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
-		return;
+	slot_cmd = 0x0200;
+	cmd_mask = PWR_LED_CTRL;
+	if (!pciehp_poll_mode) {
+		slot_cmd = slot_cmd | HP_INTR_ENABLE;
+		cmd_mask = cmd_mask | HP_INTR_ENABLE;
 	}
 
-	slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0200;
-
-	if (!pciehp_poll_mode)
-		slot_cmd = slot_cmd | HP_INTR_ENABLE; 
-	pcie_write_cmd(slot, slot_cmd);
+	pcie_write_cmd(slot, slot_cmd, cmd_mask);
 
 	dbg("%s: SLOTCTRL %x write cmd %x\n",
 	    __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
@@ -669,7 +670,8 @@ static int hpc_power_on_slot(struct slot * slot)
 {
 	struct controller *ctrl = slot->ctrl;
 	u16 slot_cmd;
-	u16 slot_ctrl, slot_status;
+	u16 cmd_mask;
+	u16 slot_status;
 	int retval = 0;
 
 	DBG_ENTER_ROUTINE 
@@ -692,23 +694,23 @@ static int hpc_power_on_slot(struct slot * slot)
 		}
 	}
 
-	retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
-	if (retval) {
-		err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
-		return retval;
-	}
-
-	slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON;
-
+	slot_cmd = POWER_ON;
+	cmd_mask = PWR_CTRL;
 	/* Enable detection that we turned off at slot power-off time */
-	if (!pciehp_poll_mode)
+	if (!pciehp_poll_mode) {
 		slot_cmd = slot_cmd |
 		           PWR_FAULT_DETECT_ENABLE |
 		           MRL_DETECT_ENABLE |
 		           PRSN_DETECT_ENABLE |
 		           HP_INTR_ENABLE;
+		cmd_mask = cmd_mask |
+		           PWR_FAULT_DETECT_ENABLE |
+		           MRL_DETECT_ENABLE |
+		           PRSN_DETECT_ENABLE |
+		           HP_INTR_ENABLE;
+	}
 
-	retval = pcie_write_cmd(slot, slot_cmd);
+	retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
 
 	if (retval) {
 		err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd);
@@ -726,21 +728,15 @@ static int hpc_power_off_slot(struct slot * slot)
 {
 	struct controller *ctrl = slot->ctrl;
 	u16 slot_cmd;
-	u16 slot_ctrl;
+	u16 cmd_mask;
 	int retval = 0;
 
 	DBG_ENTER_ROUTINE 
 
 	dbg("%s: slot->hp_slot %x\n", __FUNCTION__, slot->hp_slot);
 
-	retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
-	if (retval) {
-		err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
-		return retval;
-	}
-
-	slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF;
-
+	slot_cmd = POWER_OFF;
+	cmd_mask = PWR_CTRL;
 	/*
 	 * If we get MRL or presence detect interrupts now, the isr
 	 * will notice the sticky power-fault bit too and issue power
@@ -748,14 +744,19 @@ static int hpc_power_off_slot(struct slot * slot)
 	 * of command completions, since the power-fault bit remains on
 	 * till the slot is powered on again.
 	 */
-	if (!pciehp_poll_mode)
+	if (!pciehp_poll_mode) {
 		slot_cmd = (slot_cmd &
 		            ~PWR_FAULT_DETECT_ENABLE &
 		            ~MRL_DETECT_ENABLE &
 		            ~PRSN_DETECT_ENABLE) | HP_INTR_ENABLE;
+		cmd_mask = cmd_mask |
+			   PWR_FAULT_DETECT_ENABLE |
+			   MRL_DETECT_ENABLE |
+			   PRSN_DETECT_ENABLE |
+			   HP_INTR_ENABLE;
+	}
 
-	retval = pcie_write_cmd(slot, slot_cmd);
-
+	retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
 	if (retval) {
 		err("%s: Write command failed!\n", __FUNCTION__);
 		return -1;
@@ -775,6 +776,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 	u16 temp_word;
 	int hp_slot = 0;	/* only 1 slot per PCI Express port */
 	int rc = 0;
+	unsigned long flags;
 
 	rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
 	if (rc) {
@@ -794,10 +796,12 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 	dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);
 	/* Mask Hot-plug Interrupt Enable */
 	if (!pciehp_poll_mode) {
+		spin_lock_irqsave(&ctrl->lock, flags);
 		rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
 		if (rc) {
 			err("%s: Cannot read SLOT_CTRL register\n",
 			    __FUNCTION__);
+			spin_unlock_irqrestore(&ctrl->lock, flags);
 			return IRQ_NONE;
 		}
 
@@ -808,8 +812,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 		if (rc) {
 			err("%s: Cannot write to SLOTCTRL register\n",
 			    __FUNCTION__);
+			spin_unlock_irqrestore(&ctrl->lock, flags);
 			return IRQ_NONE;
 		}
+		spin_unlock_irqrestore(&ctrl->lock, flags);
 
 		rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
 		if (rc) {
@@ -859,10 +865,12 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 	}
 	/* Unmask Hot-plug Interrupt Enable */
 	if (!pciehp_poll_mode) {
+		spin_lock_irqsave(&ctrl->lock, flags);
 		rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
 		if (rc) {
 			err("%s: Cannot read SLOTCTRL register\n",
 			    __FUNCTION__);
+			spin_unlock_irqrestore(&ctrl->lock, flags);
 			return IRQ_NONE;
 		}
 
@@ -873,8 +881,10 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
 		if (rc) {
 			err("%s: Cannot write to SLOTCTRL register\n",
 			    __FUNCTION__);
+			spin_unlock_irqrestore(&ctrl->lock, flags);
 			return IRQ_NONE;
 		}
+		spin_unlock_irqrestore(&ctrl->lock, flags);
 
 		rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
 		if (rc) {
@@ -1237,6 +1247,7 @@ int pcie_init(struct controller * ctrl, struct pcie_device *dev)
 
 	mutex_init(&ctrl->crit_sect);
 	mutex_init(&ctrl->ctrl_lock);
+	spin_lock_init(&ctrl->lock);
 
 	/* setup wait queue */
 	init_waitqueue_head(&ctrl->queue);
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index b5ac810404c0..c8062494009f 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -55,8 +55,6 @@ acpi_query_osc (
 
 	status = acpi_evaluate_object(handle, "_OSC", &input, &output);
 	if (ACPI_FAILURE (status)) {
-		printk(KERN_DEBUG  
-			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
 		*ret_status = status;
 		return status;
 	}
@@ -124,11 +122,9 @@ acpi_run_osc (
 	in_params[3].buffer.pointer 	= (u8 *)context;
 
 	status = acpi_evaluate_object(handle, "_OSC", &input, &output);
-	if (ACPI_FAILURE (status)) {
-		printk(KERN_DEBUG  
-			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
+	if (ACPI_FAILURE (status))
 		return status;
-	}
+
 	out_obj = output.pointer;
 	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG  
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 284e83a527f9..10dbdec80416 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -213,7 +213,8 @@ struct device_attribute pci_dev_attrs[] = {
 };
 
 static ssize_t
-pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_read_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+		char *buf, loff_t off, size_t count)
 {
 	struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj));
 	unsigned int size = 64;
@@ -285,7 +286,8 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
 }
 
 static ssize_t
-pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_write_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+		 char *buf, loff_t off, size_t count)
 {
 	struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj));
 	unsigned int size = count;
@@ -352,7 +354,8 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
  * callback routine (pci_legacy_read).
  */
 ssize_t
-pci_read_legacy_io(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_read_legacy_io(struct kobject *kobj, struct bin_attribute *bin_attr,
+		   char *buf, loff_t off, size_t count)
 {
         struct pci_bus *bus = to_pci_bus(container_of(kobj,
                                                       struct class_device,
@@ -376,7 +379,8 @@ pci_read_legacy_io(struct kobject *kobj, char *buf, loff_t off, size_t count)
  * callback routine (pci_legacy_write).
  */
 ssize_t
-pci_write_legacy_io(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_write_legacy_io(struct kobject *kobj, struct bin_attribute *bin_attr,
+		    char *buf, loff_t off, size_t count)
 {
         struct pci_bus *bus = to_pci_bus(container_of(kobj,
 						      struct class_device,
@@ -499,7 +503,6 @@ static int pci_create_resource_files(struct pci_dev *pdev)
 			sprintf(res_attr_name, "resource%d", i);
 			res_attr->attr.name = res_attr_name;
 			res_attr->attr.mode = S_IRUSR | S_IWUSR;
-			res_attr->attr.owner = THIS_MODULE;
 			res_attr->size = pci_resource_len(pdev, i);
 			res_attr->mmap = pci_mmap_resource;
 			res_attr->private = &pdev->resource[i];
@@ -529,7 +532,8 @@ static inline void pci_remove_resource_files(struct pci_dev *dev) { return; }
  * writing anything except 0 enables it
  */
 static ssize_t
-pci_write_rom(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_write_rom(struct kobject *kobj, struct bin_attribute *bin_attr,
+	      char *buf, loff_t off, size_t count)
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj));
 
@@ -552,7 +556,8 @@ pci_write_rom(struct kobject *kobj, char *buf, loff_t off, size_t count)
  * device corresponding to @kobj.
  */
 static ssize_t
-pci_read_rom(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_read_rom(struct kobject *kobj, struct bin_attribute *bin_attr,
+	     char *buf, loff_t off, size_t count)
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj));
 	void __iomem *rom;
@@ -582,7 +587,6 @@ static struct bin_attribute pci_config_attr = {
 	.attr =	{
 		.name = "config",
 		.mode = S_IRUGO | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 256,
 	.read = pci_read_config,
@@ -593,13 +597,17 @@ static struct bin_attribute pcie_config_attr = {
 	.attr =	{
 		.name = "config",
 		.mode = S_IRUGO | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 4096,
 	.read = pci_read_config,
 	.write = pci_write_config,
 };
 
+int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev)
+{
+	return 0;
+}
+
 int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 {
 	struct bin_attribute *rom_attr = NULL;
@@ -628,7 +636,6 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 			rom_attr->size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
 			rom_attr->attr.name = "rom";
 			rom_attr->attr.mode = S_IRUSR;
-			rom_attr->attr.owner = THIS_MODULE;
 			rom_attr->read = pci_read_rom;
 			rom_attr->write = pci_write_rom;
 			retval = sysfs_create_bin_file(&pdev->dev.kobj, rom_attr);
@@ -640,10 +647,14 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
 		}
 	}
 	/* add platform-specific attributes */
-	pcibios_add_platform_entries(pdev);
+	if (pcibios_add_platform_entries(pdev))
+		goto err_rom_file;
 
 	return 0;
 
+err_rom_file:
+	if (pci_resource_len(pdev, PCI_ROM_RESOURCE))
+		sysfs_remove_bin_file(&pdev->dev.kobj, rom_attr);
 err_rom:
 	kfree(rom_attr);
 err_resource_files:
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index fd47ac0c4730..03fd59e80fef 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -406,6 +406,13 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
 		return 0;
 
+	/* find PCI PM capability in list */
+	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+
+	/* abort if the device doesn't support PM capabilities */
+	if (!pm)
+		return -EIO;
+
 	/* Validate current state:
 	 * Can enter D0 from any state, but if we can only go deeper 
 	 * to sleep if we're already in a low power state
@@ -418,13 +425,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return 0;        /* we're already there */
 
 
-	/* find PCI PM capability in list */
-	pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-	
-	/* abort if the device doesn't support PM capabilities */
-	if (!pm)
-		return -EIO; 
-
 	pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
 	if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
 		printk(KERN_DEBUG
@@ -1186,6 +1186,11 @@ int pci_set_mwi(struct pci_dev *dev)
 	return 0;
 }
 
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+	return 0;
+}
+
 void pci_clear_mwi(struct pci_dev *dev)
 {
 }
@@ -1242,9 +1247,7 @@ pci_set_cacheline_size(struct pci_dev *dev)
  * pci_set_mwi - enables memory-write-invalidate PCI transaction
  * @dev: the PCI device for which MWI is enabled
  *
- * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND,
- * and then calls @pcibios_set_mwi to do the needed arch specific
- * operations or a generic mwi-prep function.
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
  *
  * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
  */
@@ -1260,7 +1263,8 @@ pci_set_mwi(struct pci_dev *dev)
 
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 	if (! (cmd & PCI_COMMAND_INVALIDATE)) {
-		pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
+		pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n",
+			pci_name(dev));
 		cmd |= PCI_COMMAND_INVALIDATE;
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
@@ -1269,6 +1273,21 @@ pci_set_mwi(struct pci_dev *dev)
 }
 
 /**
+ * pci_try_set_mwi - enables memory-write-invalidate PCI transaction
+ * @dev: the PCI device for which MWI is enabled
+ *
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
+ * Callers are not required to check the return value.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+	int rc = pci_set_mwi(dev);
+	return rc;
+}
+
+/**
  * pci_clear_mwi - disables Memory-Write-Invalidate for device dev
  * @dev: the PCI device to disable
  *
@@ -1375,6 +1394,164 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 #endif
 
 /**
+ * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum designed memory read count in bytes
+ *    or appropriate error value.
+ */
+int pcix_get_max_mmrbc(struct pci_dev *dev)
+{
+	int err, cap;
+	u32 stat;
+
+	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	if (!cap)
+		return -EINVAL;
+
+	err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+	if (err)
+		return -EINVAL;
+
+	return (stat & PCI_X_STATUS_MAX_READ) >> 12;
+}
+EXPORT_SYMBOL(pcix_get_max_mmrbc);
+
+/**
+ * pcix_get_mmrbc - get PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum memory read count in bytes
+ *    or appropriate error value.
+ */
+int pcix_get_mmrbc(struct pci_dev *dev)
+{
+	int ret, cap;
+	u32 cmd;
+
+	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	if (!cap)
+		return -EINVAL;
+
+	ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+	if (!ret)
+		ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
+
+	return ret;
+}
+EXPORT_SYMBOL(pcix_get_mmrbc);
+
+/**
+ * pcix_set_mmrbc - set PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ * @mmrbc: maximum memory read count in bytes
+ *    valid values are 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum memory read byte count, some bridges have erratas
+ * that prevent this.
+ */
+int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
+{
+	int cap, err = -EINVAL;
+	u32 stat, cmd, v, o;
+
+	if (mmrbc < 512 || mmrbc > 4096 || (mmrbc & (mmrbc-1)))
+		goto out;
+
+	v = ffs(mmrbc) - 10;
+
+	cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	if (!cap)
+		goto out;
+
+	err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+	if (err)
+		goto out;
+
+	if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
+		return -E2BIG;
+
+	err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+	if (err)
+		goto out;
+
+	o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
+	if (o != v) {
+		if (v > o && dev->bus &&
+		   (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+			return -EIO;
+
+		cmd &= ~PCI_X_CMD_MAX_READ;
+		cmd |= v << 2;
+		err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd);
+	}
+out:
+	return err;
+}
+EXPORT_SYMBOL(pcix_set_mmrbc);
+
+/**
+ * pcie_get_readrq - get PCI Express read request size
+ * @dev: PCI device to query
+ *
+ * Returns maximum memory read request in bytes
+ *    or appropriate error value.
+ */
+int pcie_get_readrq(struct pci_dev *dev)
+{
+	int ret, cap;
+	u16 ctl;
+
+	cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (!cap)
+		return -EINVAL;
+
+	ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+	if (!ret)
+	ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+
+	return ret;
+}
+EXPORT_SYMBOL(pcie_get_readrq);
+
+/**
+ * pcie_set_readrq - set PCI Express maximum memory read request
+ * @dev: PCI device to query
+ * @count: maximum memory read count in bytes
+ *    valid values are 128, 256, 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum read byte count
+ */
+int pcie_set_readrq(struct pci_dev *dev, int rq)
+{
+	int cap, err = -EINVAL;
+	u16 ctl, v;
+
+	if (rq < 128 || rq > 4096 || (rq & (rq-1)))
+		goto out;
+
+	v = (ffs(rq) - 8) << 12;
+
+	cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+	if (!cap)
+		goto out;
+
+	err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+	if (err)
+		goto out;
+
+	if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
+		ctl &= ~PCI_EXP_DEVCTL_READRQ;
+		ctl |= v;
+		err = pci_write_config_dword(dev, cap + PCI_EXP_DEVCTL, ctl);
+	}
+
+out:
+	return err;
+}
+EXPORT_SYMBOL(pcie_set_readrq);
+
+/**
  * pci_select_bars - Make BAR mask from the type of resource
  * @dev: the PCI device for which BAR mask is made
  * @flags: resource type mask to be selected
@@ -1442,6 +1619,7 @@ EXPORT_SYMBOL(pci_release_selected_regions);
 EXPORT_SYMBOL(pci_request_selected_regions);
 EXPORT_SYMBOL(pci_set_master);
 EXPORT_SYMBOL(pci_set_mwi);
+EXPORT_SYMBOL(pci_try_set_mwi);
 EXPORT_SYMBOL(pci_clear_mwi);
 EXPORT_SYMBOL_GPL(pci_intx);
 EXPORT_SYMBOL(pci_set_dma_mask);
diff --git a/drivers/pci/pcie/aer/Kconfig b/drivers/pci/pcie/aer/Kconfig
index 3f37a60a6438..c3bde588aa13 100644
--- a/drivers/pci/pcie/aer/Kconfig
+++ b/drivers/pci/pcie/aer/Kconfig
@@ -4,7 +4,7 @@
 
 config PCIEAER
 	boolean "Root Port Advanced Error Reporting support"
-	depends on PCIEPORTBUS && ACPI
+	depends on PCIEPORTBUS
 	default y
 	help
 	  This enables PCI Express Root Port Advanced Error Reporting
diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile
index 15a4f40d520b..8da3bd8455a8 100644
--- a/drivers/pci/pcie/aer/Makefile
+++ b/drivers/pci/pcie/aer/Makefile
@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_PCIEAER) += aerdriver.o
 
-aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o
+aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o
+aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o
 
diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
index db6ad8e763ac..6846fb42b399 100644
--- a/drivers/pci/pcie/aer/aerdrv.c
+++ b/drivers/pci/pcie/aer/aerdrv.c
@@ -157,7 +157,7 @@ static struct aer_rpc* aer_alloc_rpc(struct pcie_device *dev)
 	 * Initialize Root lock access, e_lock, to Root Error Status Reg,
 	 * Root Error ID Reg, and Root error producer/consumer index.
 	 */
-	rpc->e_lock = SPIN_LOCK_UNLOCKED;
+	spin_lock_init(&rpc->e_lock);
 
 	rpc->rpd = dev;
 	INIT_WORK(&rpc->dpc_handler, aer_isr);
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index 5cca394d5999..c7ad68b6c6d6 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -19,10 +19,6 @@
 #define AER_ERROR_MASK			0x001fffff
 #define AER_ERROR(d)			(d & AER_ERROR_MASK)
 
-#define OSC_METHOD_RUN_SUCCESS		0
-#define OSC_METHOD_NOT_SUPPORTED	1
-#define OSC_METHOD_RUN_FAILURE		2
-
 /* Root Error Status Register Bits */
 #define ROOT_ERR_STATUS_MASKS			0x0f
 
@@ -121,6 +117,14 @@ extern void aer_delete_rootport(struct aer_rpc *rpc);
 extern int aer_init(struct pcie_device *dev);
 extern void aer_isr(struct work_struct *work);
 extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
-extern int aer_osc_setup(struct pci_dev *dev);
+
+#ifdef CONFIG_ACPI
+extern int aer_osc_setup(struct pcie_device *pciedev);
+#else
+static inline int aer_osc_setup(struct pcie_device *pciedev)
+{
+	return 0;
+}
+#endif
 
 #endif //_AERDRV_H_
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index fa68e89ebec9..1a1eb45a779e 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -20,19 +20,18 @@
 
 /**
  * aer_osc_setup - run ACPI _OSC method
+ * @pciedev: pcie_device which AER is being enabled on
  *
- * Return:
- *	Zero if success. Nonzero for otherwise.
+ * @return: Zero on success. Nonzero otherwise.
  *
  * Invoked when PCIE bus loads AER service driver. To avoid conflict with
  * BIOS AER support requires BIOS to yield AER control to OS native driver.
  **/
-int aer_osc_setup(struct pci_dev *dev)
+int aer_osc_setup(struct pcie_device *pciedev)
 {
-	int retval = OSC_METHOD_RUN_SUCCESS;
-	acpi_status status;
-	acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
-	struct pci_dev *pdev = dev;
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *pdev = pciedev->port;
+	acpi_handle handle = DEVICE_ACPI_HANDLE(&pdev->dev);
 	struct pci_bus *parent;
 
 	while (!handle) {
@@ -50,19 +49,20 @@ int aer_osc_setup(struct pci_dev *dev)
 		pdev = parent->self;
 	}
 
-	if (!handle)
-		return OSC_METHOD_NOT_SUPPORTED;
+	if (handle) {
+		pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
+		status = pci_osc_control_set(handle,
+					OSC_PCI_EXPRESS_AER_CONTROL |
+					OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+	}
 
-	pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
-	status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL |
-		OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
 	if (ACPI_FAILURE(status)) {
-		if (status == AE_SUPPORT)
-			retval = OSC_METHOD_NOT_SUPPORTED;
-	 	else
-			retval = OSC_METHOD_RUN_FAILURE;
+		printk(KERN_DEBUG "AER service couldn't init device %s - %s\n",
+		    pciedev->device.bus_id,
+		    (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+		    "no _OSC support" : "Run ACPI _OSC fails");
+		return -1;
 	}
 
-	return retval;
+	return 0;
 }
-
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index 08e13033ced8..92a8469b21ba 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -22,8 +22,6 @@
 #include <linux/errno.h>
 #include <linux/pm.h>
 #include <linux/suspend.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
 #include <linux/delay.h>
 #include "aerdrv.h"
 
@@ -119,6 +117,21 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
 	return 0;
 }
 
+int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
+{
+	int pos;
+	u32 status;
+
+	pos = pci_find_aer_capability(dev);
+	if (!pos)
+		return -EIO;
+
+	pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
+	pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status);
+
+	return 0;
+}
+
 static int find_device_iter(struct device *device, void *data)
 {
 	struct pci_dev *dev;
@@ -733,20 +746,8 @@ void aer_delete_rootport(struct aer_rpc *rpc)
  **/
 int aer_init(struct pcie_device *dev)
 {
-	int status;
-
-	/* Run _OSC Method */
-	status = aer_osc_setup(dev->port);
-
-	if(status != OSC_METHOD_RUN_SUCCESS) {
-		printk(KERN_DEBUG "%s: AER service init fails - %s\n",
-		__FUNCTION__,
-		(status == OSC_METHOD_NOT_SUPPORTED) ?
-			"No ACPI _OSC support" : "Run ACPI _OSC fails");
-
-		if (!forceload)
-			return status;
-	}
+	if (aer_osc_setup(dev) && !forceload)
+		return -ENXIO;
 
 	return AER_SUCCESS;
 }
@@ -755,4 +756,5 @@ EXPORT_SYMBOL_GPL(pci_find_aer_capability);
 EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);
 EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
 EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
+EXPORT_SYMBOL_GPL(pci_cleanup_aer_correct_error_status);
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e48fcf089621..a7bce75c6732 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -39,7 +39,6 @@ static void pci_create_legacy_files(struct pci_bus *b)
 		b->legacy_io->attr.name = "legacy_io";
 		b->legacy_io->size = 0xffff;
 		b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_io->attr.owner = THIS_MODULE;
 		b->legacy_io->read = pci_read_legacy_io;
 		b->legacy_io->write = pci_write_legacy_io;
 		class_device_create_bin_file(&b->class_dev, b->legacy_io);
@@ -49,7 +48,6 @@ static void pci_create_legacy_files(struct pci_bus *b)
 		b->legacy_mem->attr.name = "legacy_mem";
 		b->legacy_mem->size = 1024*1024;
 		b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
-		b->legacy_mem->attr.owner = THIS_MODULE;
 		b->legacy_mem->mmap = pci_mmap_legacy_mem;
 		class_device_create_bin_file(&b->class_dev, b->legacy_mem);
 	}
@@ -656,7 +654,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass
 			       pcibios_assign_all_busses() ? " " :
 			       " (try 'pci=assign-busses')");
 			printk(KERN_WARNING "Please report the result to "
-			       "linux-kernel to fix this permanently\n");
+			       "<bk@suse.de> to fix this permanently\n");
 		}
 		bus = bus->parent;
 	}
@@ -702,6 +700,7 @@ static int pci_setup_device(struct pci_dev * dev)
 		dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
 
 	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+	dev->revision = class & 0xff;
 	class >>= 8;				    /* upper 3 bytes */
 	dev->class = class;
 	class >>= 8;
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 0425a7b7350d..cfa0dfe61b1a 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -480,7 +480,6 @@ static int __init pci_proc_init(void)
 __initcall(pci_proc_init);
 
 #ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_proc_attach_device);
 EXPORT_SYMBOL(pci_proc_detach_bus);
 #endif
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 01d8f8a8843c..c559085c89a5 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -587,10 +587,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8237,		quirk_via_v
  */
 static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
 {
-	u8 rev;
-
-	pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-	if (rev >= 0x02) {
+	if (dev->revision >= 0x02) {
 		printk(KERN_WARNING "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
 		printk(KERN_WARNING "        : booting with the \"noapic\" option.\n");
 	}
@@ -610,13 +607,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI,	PCI_ANY_ID,			quirk_ioapic_rmw );
 #define AMD8131_NIOAMODE_BIT 0
 static void quirk_amd_8131_ioapic(struct pci_dev *dev)
 { 
-        unsigned char revid, tmp;
+        unsigned char tmp;
         
         if (nr_ioapics == 0) 
                 return;
 
-        pci_read_config_byte(dev, PCI_REVISION_ID, &revid);
-        if (revid == AMD8131_revA0 || revid == AMD8131_revB0) {
+        if (dev->revision == AMD8131_revA0 || dev->revision == AMD8131_revB0) {
                 printk(KERN_INFO "Fixing up AMD8131 IOAPIC mode\n"); 
                 pci_read_config_byte( dev, AMD8131_MISC, &tmp);
                 tmp &= ~(1 << AMD8131_NIOAMODE_BIT);
@@ -627,6 +623,22 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_
 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
 #endif /* CONFIG_X86_IO_APIC */
 
+/*
+ * Some settings of MMRBC can lead to data corruption so block changes.
+ * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
+ */
+static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev)
+{
+	unsigned char revid;
+
+	pci_read_config_byte(dev, PCI_REVISION_ID, &revid);
+	if (dev->subordinate && revid <= 0x12) {
+		printk(KERN_INFO "AMD8131 rev %x detected, disabling PCI-X "
+				"MMRBC\n", revid);
+		dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
 
 /*
  * FIXME: it is questionable that quirk_via_acpi
@@ -843,10 +855,8 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX,	PCI_DEVICE_ID_CYRIX_PCI_MASTER, qu
 static void quirk_disable_pxb(struct pci_dev *pdev)
 {
 	u16 config;
-	u8 rev;
 	
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-	if (rev != 0x04)		/* Only C0 requires this */
+	if (pdev->revision != 0x04)		/* Only C0 requires this */
 		return;
 	pci_read_config_word(pdev, 0x40, &config);
 	if (config & (1<<6)) {
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index d087e0817715..dbbcc04abd1a 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -54,6 +54,49 @@ static void pci_disable_rom(struct pci_dev *pdev)
 }
 
 /**
+ * pci_get_rom_size - obtain the actual size of the ROM image
+ * @rom: kernel virtual pointer to image of ROM
+ * @size: size of PCI window
+ *  return: size of actual ROM image
+ *
+ * Determine the actual length of the ROM image.
+ * The PCI window size could be much larger than the
+ * actual image size.
+ */
+size_t pci_get_rom_size(void __iomem *rom, size_t size)
+{
+	void __iomem *image;
+	int last_image;
+
+	image = rom;
+	do {
+		void __iomem *pds;
+		/* Standard PCI ROMs start out with these bytes 55 AA */
+		if (readb(image) != 0x55)
+			break;
+		if (readb(image + 1) != 0xAA)
+			break;
+		/* get the PCI data structure and check its signature */
+		pds = image + readw(image + 24);
+		if (readb(pds) != 'P')
+			break;
+		if (readb(pds + 1) != 'C')
+			break;
+		if (readb(pds + 2) != 'I')
+			break;
+		if (readb(pds + 3) != 'R')
+			break;
+		last_image = readb(pds + 21) & 0x80;
+		/* this length is reliable */
+		image += readw(pds + 16) * 512;
+	} while (!last_image);
+
+	/* never return a size larger than the PCI resource window */
+	/* there are known ROMs that get the size wrong */
+	return min((size_t)(image - rom), size);
+}
+
+/**
  * pci_map_rom - map a PCI ROM to kernel space
  * @pdev: pointer to pci device struct
  * @size: pointer to receive size of pci window over ROM
@@ -68,8 +111,6 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
 	struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
 	loff_t start;
 	void __iomem *rom;
-	void __iomem *image;
-	int last_image;
 
 	/*
 	 * IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
@@ -117,33 +158,7 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
 	 * size is much larger than the actual size of the ROM.
 	 * True size is important if the ROM is going to be copied.
 	 */
-	image = rom;
-	do {
-		void __iomem *pds;
-		/* Standard PCI ROMs start out with these bytes 55 AA */
-		if (readb(image) != 0x55)
-			break;
-		if (readb(image + 1) != 0xAA)
-			break;
-		/* get the PCI data structure and check its signature */
-		pds = image + readw(image + 24);
-		if (readb(pds) != 'P')
-			break;
-		if (readb(pds + 1) != 'C')
-			break;
-		if (readb(pds + 2) != 'I')
-			break;
-		if (readb(pds + 3) != 'R')
-			break;
-		last_image = readb(pds + 21) & 0x80;
-		/* this length is reliable */
-		image += readw(pds + 16) * 512;
-	} while (!last_image);
-
-	/* never return a size larger than the PCI resource window */
-	/* there are known ROMs that get the size wrong */
-	*size = min((size_t)(image - rom), *size);
-
+	*size = pci_get_rom_size(rom, *size);
 	return rom;
 }
 
diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index c13232435dc0..9f7090fa8771 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -139,12 +139,14 @@ struct pci_dev * pci_get_slot(struct pci_bus *bus, unsigned int devfn)
 }
 
 /**
- * pci_get_bus_and_slot - locate PCI device from a given PCI slot
+ * pci_get_bus_and_slot - locate PCI device from a given PCI bus & slot
  * @bus: number of PCI bus on which desired PCI device resides
  * @devfn: encodes number of PCI slot in which the desired PCI
  * device resides and the logical device number within that slot
  * in case of multi-function devices.
  *
+ * Note: the bus/slot search is limited to PCI domain (segment) 0.
+ *
  * Given a PCI bus and slot/function number, the desired PCI device
  * is located in system global list of PCI devices.  If the device
  * is found, a pointer to its data structure is returned.  If no
@@ -157,7 +159,8 @@ struct pci_dev * pci_get_bus_and_slot(unsigned int bus, unsigned int devfn)
 	struct pci_dev *dev = NULL;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		if (dev->bus->number == bus && dev->devfn == devfn)
+		if (pci_domain_nr(dev->bus) == 0 &&
+		   (dev->bus->number == bus && dev->devfn == devfn))
 			return dev;
 	}
 	return NULL;
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 5ec297d7a5b4..5e5191ec8de6 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -34,8 +34,6 @@
 #define DBG(x...)
 #endif
 
-#define ROUND_UP(x, a)		(((x) + (a) - 1) & ~((a) - 1))
-
 static void pbus_assign_resources_sorted(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
@@ -310,7 +308,7 @@ static void pbus_size_io(struct pci_bus *bus)
 #if defined(CONFIG_ISA) || defined(CONFIG_EISA)
 	size = (size & 0xff) + ((size & ~0xffUL) << 2);
 #endif
-	size = ROUND_UP(size + size1, 4096);
+	size = ALIGN(size + size1, 4096);
 	if (!size) {
 		b_res->flags = 0;
 		return;
@@ -378,11 +376,11 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 
 		if (!align)
 			min_align = align1;
-		else if (ROUND_UP(align + min_align, min_align) < align1)
+		else if (ALIGN(align + min_align, min_align) < align1)
 			min_align = align1 >> 1;
 		align += aligns[order];
 	}
-	size = ROUND_UP(size, min_align);
+	size = ALIGN(size, min_align);
 	if (!size) {
 		b_res->flags = 0;
 		return 1;
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index 9d37fec27f24..2ac050d7f8cf 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -23,14 +23,14 @@ sys_pciconfig_read(unsigned long bus, unsigned long dfn,
 	u8 byte;
 	u16 word;
 	u32 dword;
-	long err, cfg_ret;
+	long err;
+	long cfg_ret;
 
-	err = -EPERM;
 	if (!capable(CAP_SYS_ADMIN))
-		goto error;
+		return -EPERM;
 
 	err = -ENODEV;
-	dev = pci_find_slot(bus, dfn);
+	dev = pci_get_bus_and_slot(bus, dfn);
 	if (!dev)
 		goto error;
 
@@ -66,7 +66,8 @@ sys_pciconfig_read(unsigned long bus, unsigned long dfn,
 	case 4:
 		err = put_user(dword, (unsigned int __user *)buf);
 		break;
-	};
+	}
+	pci_dev_put(dev);
 	return err;
 
 error:
@@ -83,7 +84,8 @@ error:
 	case 4:
 		put_user(-1, (unsigned int __user *)buf);
 		break;
-	};
+	}
+	pci_dev_put(dev);
 	return err;
 }
 
@@ -101,7 +103,7 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	dev = pci_find_slot(bus, dfn);
+	dev = pci_get_bus_and_slot(bus, dfn);
 	if (!dev)
 		return -ENODEV;
 
@@ -137,8 +139,8 @@ sys_pciconfig_write(unsigned long bus, unsigned long dfn,
 	default:
 		err = -EINVAL;
 		break;
-	};
+	}
 	unlock_kernel();
-
+	pci_dev_put(dev);
 	return err;
 }
diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c
index a2bb46526b56..b4409002b7f8 100644
--- a/drivers/pcmcia/socket_sysfs.c
+++ b/drivers/pcmcia/socket_sysfs.c
@@ -283,7 +283,9 @@ static ssize_t pccard_extract_cis(struct pcmcia_socket *s, char *buf, loff_t off
 	return (ret);
 }
 
-static ssize_t pccard_show_cis(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t pccard_show_cis(struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
 {
 	unsigned int size = 0x200;
 
@@ -311,7 +313,9 @@ static ssize_t pccard_show_cis(struct kobject *kobj, char *buf, loff_t off, size
 	return (count);
 }
 
-static ssize_t pccard_store_cis(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t pccard_store_cis(struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
 {
 	struct pcmcia_socket *s = to_socket(container_of(kobj, struct device, kobj));
 	cisdump_t *cis;
@@ -366,7 +370,7 @@ static struct device_attribute *pccard_socket_attributes[] = {
 };
 
 static struct bin_attribute pccard_cis_attr = {
-	.attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR, .owner = THIS_MODULE},
+	.attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR },
 	.size = 0x200,
 	.read = pccard_show_cis,
 	.write = pccard_store_cis,
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
new file mode 100644
index 000000000000..ab9c3e5a7c1d
--- /dev/null
+++ b/drivers/power/Kconfig
@@ -0,0 +1,51 @@
+menuconfig POWER_SUPPLY
+	tristate "Power supply class support"
+	help
+	  Say Y here to enable power supply class support. This allows
+	  power supply (batteries, AC, USB) monitoring by userspace
+	  via sysfs and uevent (if available) and/or APM kernel interface
+	  (if selected below).
+
+if POWER_SUPPLY
+
+config POWER_SUPPLY_DEBUG
+	bool "Power supply debug"
+	help
+	  Say Y here to enable debugging messages for power supply class
+	  and drivers.
+
+config PDA_POWER
+	tristate "Generic PDA/phone power driver"
+	help
+	  Say Y here to enable generic power driver for PDAs and phones with
+	  one or two external power supplies (AC/USB) connected to main and
+	  backup batteries, and optional builtin charger.
+
+config APM_POWER
+	tristate "APM emulation for class batteries"
+	depends on APM_EMULATION
+	help
+	  Say Y here to enable support APM status emulation using
+	  battery class devices.
+
+config BATTERY_DS2760
+	tristate "DS2760 battery driver (HP iPAQ & others)"
+	select W1
+	select W1_SLAVE_DS2760
+	help
+	  Say Y here to enable support for batteries with ds2760 chip.
+
+config BATTERY_PMU
+	tristate "Apple PMU battery"
+	depends on ADB_PMU
+	help
+	  Say Y here to expose battery information on Apple machines
+	  through the generic battery class.
+
+config BATTERY_OLPC
+	tristate "One Laptop Per Child battery"
+	depends on X86_32 && OLPC
+	help
+	  Say Y to enable support for the battery on the OLPC laptop.
+
+endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
new file mode 100644
index 000000000000..6413ded5fe5f
--- /dev/null
+++ b/drivers/power/Makefile
@@ -0,0 +1,22 @@
+power_supply-objs := power_supply_core.o
+
+ifeq ($(CONFIG_SYSFS),y)
+power_supply-objs += power_supply_sysfs.o
+endif
+
+ifeq ($(CONFIG_LEDS_TRIGGERS),y)
+power_supply-objs += power_supply_leds.o
+endif
+
+ifeq ($(CONFIG_POWER_SUPPLY_DEBUG),y)
+EXTRA_CFLAGS += -DDEBUG
+endif
+
+obj-$(CONFIG_POWER_SUPPLY)	+= power_supply.o
+
+obj-$(CONFIG_PDA_POWER)		+= pda_power.o
+obj-$(CONFIG_APM_POWER)		+= apm_power.o
+
+obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
+obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
+obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c
new file mode 100644
index 000000000000..042bd950d036
--- /dev/null
+++ b/drivers/power/apm_power.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright © 2007 Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Author: Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ */
+
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+#define PSY_PROP(psy, prop, val) psy->get_property(psy, \
+			 POWER_SUPPLY_PROP_##prop, val)
+
+#define _MPSY_PROP(prop, val) main_battery->get_property(main_battery, \
+							 prop, val)
+
+#define MPSY_PROP(prop, val) _MPSY_PROP(POWER_SUPPLY_PROP_##prop, val)
+
+static struct power_supply *main_battery;
+
+static void find_main_battery(void)
+{
+	struct device *dev;
+	struct power_supply *bat, *batm;
+	union power_supply_propval full;
+	int max_charge = 0;
+
+	main_battery = NULL;
+	batm = NULL;
+	list_for_each_entry(dev, &power_supply_class->devices, node) {
+		bat = dev_get_drvdata(dev);
+		/* If none of battery devices cantains 'use_for_apm' flag,
+		   choice one with maximum design charge */
+		if (!PSY_PROP(bat, CHARGE_FULL_DESIGN, &full)) {
+			if (full.intval > max_charge) {
+				batm = bat;
+				max_charge = full.intval;
+			}
+		}
+
+		if (bat->use_for_apm)
+			main_battery = bat;
+	}
+	if (!main_battery)
+		main_battery = batm;
+
+	return;
+}
+
+static int calculate_time(int status)
+{
+	union power_supply_propval charge_full, charge_empty;
+	union power_supply_propval charge, I;
+
+	if (MPSY_PROP(CHARGE_FULL, &charge_full)) {
+		/* if battery can't report this property, use design value */
+		if (MPSY_PROP(CHARGE_FULL_DESIGN, &charge_full))
+			return -1;
+	}
+
+	if (MPSY_PROP(CHARGE_EMPTY, &charge_empty)) {
+		/* if battery can't report this property, use design value */
+		if (MPSY_PROP(CHARGE_EMPTY_DESIGN, &charge_empty))
+			charge_empty.intval = 0;
+	}
+
+	if (MPSY_PROP(CHARGE_AVG, &charge)) {
+		/* if battery can't report average value, use momentary */
+		if (MPSY_PROP(CHARGE_NOW, &charge))
+			return -1;
+	}
+
+	if (MPSY_PROP(CURRENT_AVG, &I)) {
+		/* if battery can't report average value, use momentary */
+		if (MPSY_PROP(CURRENT_NOW, &I))
+			return -1;
+	}
+
+	if (status == POWER_SUPPLY_STATUS_CHARGING)
+		return ((charge.intval - charge_full.intval) * 60L) /
+		       I.intval;
+	else
+		return -((charge.intval - charge_empty.intval) * 60L) /
+			I.intval;
+}
+
+static int calculate_capacity(int using_charge)
+{
+	enum power_supply_property full_prop, empty_prop;
+	enum power_supply_property full_design_prop, empty_design_prop;
+	enum power_supply_property now_prop, avg_prop;
+	union power_supply_propval empty, full, cur;
+	int ret;
+
+	if (using_charge) {
+		full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
+		empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+		full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
+		empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN;
+		now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
+		avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
+	} else {
+		full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
+		empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
+		full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+		empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
+		now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+		avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+	}
+
+	if (_MPSY_PROP(full_prop, &full)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(full_design_prop, &full))
+			return -1;
+	}
+
+	if (_MPSY_PROP(avg_prop, &cur)) {
+		/* if battery can't report average value, use momentary */
+		if (_MPSY_PROP(now_prop, &cur))
+			return -1;
+	}
+
+	if (_MPSY_PROP(empty_prop, &empty)) {
+		/* if battery can't report this property, use design value */
+		if (_MPSY_PROP(empty_design_prop, &empty))
+			empty.intval = 0;
+	}
+
+	if (full.intval - empty.intval)
+		ret =  ((cur.intval - empty.intval) * 100L) /
+		       (full.intval - empty.intval);
+	else
+		return -1;
+
+	if (ret > 100)
+		return 100;
+	else if (ret < 0)
+		return 0;
+
+	return ret;
+}
+
+static void apm_battery_apm_get_power_status(struct apm_power_info *info)
+{
+	union power_supply_propval status;
+	union power_supply_propval capacity, time_to_full, time_to_empty;
+
+	down(&power_supply_class->sem);
+	find_main_battery();
+	if (!main_battery) {
+		up(&power_supply_class->sem);
+		return;
+	}
+
+	/* status */
+
+	if (MPSY_PROP(STATUS, &status))
+		status.intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	/* ac line status */
+
+	if ((status.intval == POWER_SUPPLY_STATUS_CHARGING) ||
+	    (status.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) ||
+	    (status.intval == POWER_SUPPLY_STATUS_FULL))
+		info->ac_line_status = APM_AC_ONLINE;
+	else
+		info->ac_line_status = APM_AC_OFFLINE;
+
+	/* battery life (i.e. capacity, in percents) */
+
+	if (MPSY_PROP(CAPACITY, &capacity) == 0) {
+		info->battery_life = capacity.intval;
+	} else {
+		/* try calculate using energy */
+		info->battery_life = calculate_capacity(0);
+		/* if failed try calculate using charge instead */
+		if (info->battery_life == -1)
+			info->battery_life = calculate_capacity(1);
+	}
+
+	/* charging status */
+
+	if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
+		info->battery_status = APM_BATTERY_STATUS_CHARGING;
+	} else {
+		if (info->battery_life > 50)
+			info->battery_status = APM_BATTERY_STATUS_HIGH;
+		else if (info->battery_life > 5)
+			info->battery_status = APM_BATTERY_STATUS_LOW;
+		else
+			info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+	}
+	info->battery_flag = info->battery_status;
+
+	/* time */
+
+	info->units = APM_UNITS_MINS;
+
+	if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
+		if (MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full)) {
+			if (MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full))
+				info->time = calculate_time(status.intval);
+			else
+				info->time = time_to_full.intval / 60;
+		}
+	} else {
+		if (MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty)) {
+			if (MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty))
+				info->time = calculate_time(status.intval);
+			else
+				info->time = time_to_empty.intval / 60;
+		}
+	}
+
+	up(&power_supply_class->sem);
+	return;
+}
+
+static int __init apm_battery_init(void)
+{
+	printk(KERN_INFO "APM Battery Driver\n");
+
+	apm_get_power_status = apm_battery_apm_get_power_status;
+	return 0;
+}
+
+static void __exit apm_battery_exit(void)
+{
+	apm_get_power_status = NULL;
+	return;
+}
+
+module_init(apm_battery_init);
+module_exit(apm_battery_exit);
+
+MODULE_AUTHOR("Eugeny Boger <eugenyboger@dgap.mipt.ru>");
+MODULE_DESCRIPTION("APM emulation driver for battery monitoring class");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
new file mode 100644
index 000000000000..00e1ea6f1de2
--- /dev/null
+++ b/drivers/power/ds2760_battery.c
@@ -0,0 +1,470 @@
+/*
+ * Driver for batteries with DS2760 chips inside.
+ *
+ * Copyright © 2007 Anton Vorontsov
+ *	       2004-2007 Matt Reimer
+ *	       2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author:  Anton Vorontsov <cbou@mail.ru>
+ *	    February 2007
+ *
+ *	    Matt Reimer <mreimer@vpop.net>
+ *	    April 2004, 2005, 2007
+ *
+ *	    Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ *	    September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include "../w1/w1.h"
+#include "../w1/slaves/w1_ds2760.h"
+
+struct ds2760_device_info {
+	struct device *dev;
+
+	/* DS2760 data, valid after calling ds2760_battery_read_status() */
+	unsigned long update_time;	/* jiffies when data read */
+	char raw[DS2760_DATA_SIZE];	/* raw DS2760 data */
+	int voltage_raw;		/* units of 4.88 mV */
+	int voltage_uV;			/* units of µV */
+	int current_raw;		/* units of 0.625 mA */
+	int current_uA;			/* units of µA */
+	int accum_current_raw;		/* units of 0.25 mAh */
+	int accum_current_uAh;		/* units of µAh */
+	int temp_raw;			/* units of 0.125 °C */
+	int temp_C;			/* units of 0.1 °C */
+	int rated_capacity;		/* units of µAh */
+	int rem_capacity;		/* percentage */
+	int full_active_uAh;		/* units of µAh */
+	int empty_uAh;			/* units of µAh */
+	int life_sec;			/* units of seconds */
+	int charge_status;		/* POWER_SUPPLY_STATUS_* */
+
+	int full_counter;
+	struct power_supply bat;
+	struct device *w1_dev;
+	struct workqueue_struct *monitor_wqueue;
+	struct delayed_work monitor_work;
+};
+
+static unsigned int cache_time = 1000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+/* Some batteries have their rated capacity stored a N * 10 mAh, while
+ * others use an index into this table. */
+static int rated_capacities[] = {
+	0,
+	920,	/* Samsung */
+	920,	/* BYD */
+	920,	/* Lishen */
+	920,	/* NEC */
+	1440,	/* Samsung */
+	1440,	/* BYD */
+	1440,	/* Lishen */
+	1440,	/* NEC */
+	2880,	/* Samsung */
+	2880,	/* BYD */
+	2880,	/* Lishen */
+	2880	/* NEC */
+};
+
+/* array is level at temps 0°C, 10°C, 20°C, 30°C, 40°C
+ * temp is in Celsius */
+static int battery_interpolate(int array[], int temp)
+{
+	int index, dt;
+
+	if (temp <= 0)
+		return array[0];
+	if (temp >= 40)
+		return array[4];
+
+	index = temp / 10;
+	dt    = temp % 10;
+
+	return array[index] + (((array[index + 1] - array[index]) * dt) / 10);
+}
+
+static int ds2760_battery_read_status(struct ds2760_device_info *di)
+{
+	int ret, i, start, count, scale[5];
+
+	if (di->update_time && time_before(jiffies, di->update_time +
+					   msecs_to_jiffies(cache_time)))
+		return 0;
+
+	/* The first time we read the entire contents of SRAM/EEPROM,
+	 * but after that we just read the interesting bits that change. */
+	if (di->update_time == 0) {
+		start = 0;
+		count = DS2760_DATA_SIZE;
+	} else {
+		start = DS2760_VOLTAGE_MSB;
+		count = DS2760_TEMP_LSB - start + 1;
+	}
+
+	ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count);
+	if (ret != count) {
+		dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
+			 di->w1_dev);
+		return 1;
+	}
+
+	di->update_time = jiffies;
+
+	/* DS2760 reports voltage in units of 4.88mV, but the battery class
+	 * reports in units of uV, so convert by multiplying by 4880. */
+	di->voltage_raw = (di->raw[DS2760_VOLTAGE_MSB] << 3) |
+			  (di->raw[DS2760_VOLTAGE_LSB] >> 5);
+	di->voltage_uV = di->voltage_raw * 4880;
+
+	/* DS2760 reports current in signed units of 0.625mA, but the battery
+	 * class reports in units of µA, so convert by multiplying by 625. */
+	di->current_raw =
+	    (((signed char)di->raw[DS2760_CURRENT_MSB]) << 5) |
+			  (di->raw[DS2760_CURRENT_LSB] >> 3);
+	di->current_uA = di->current_raw * 625;
+
+	/* DS2760 reports accumulated current in signed units of 0.25mAh. */
+	di->accum_current_raw =
+	    (((signed char)di->raw[DS2760_CURRENT_ACCUM_MSB]) << 8) |
+			   di->raw[DS2760_CURRENT_ACCUM_LSB];
+	di->accum_current_uAh = di->accum_current_raw * 250;
+
+	/* DS2760 reports temperature in signed units of 0.125°C, but the
+	 * battery class reports in units of 1/10 °C, so we convert by
+	 * multiplying by .125 * 10 = 1.25. */
+	di->temp_raw = (((signed char)di->raw[DS2760_TEMP_MSB]) << 3) |
+				     (di->raw[DS2760_TEMP_LSB] >> 5);
+	di->temp_C = di->temp_raw + (di->temp_raw / 4);
+
+	/* At least some battery monitors (e.g. HP iPAQ) store the battery's
+	 * maximum rated capacity. */
+	if (di->raw[DS2760_RATED_CAPACITY] < ARRAY_SIZE(rated_capacities))
+		di->rated_capacity = rated_capacities[
+			(unsigned int)di->raw[DS2760_RATED_CAPACITY]];
+	else
+		di->rated_capacity = di->raw[DS2760_RATED_CAPACITY] * 10;
+
+	di->rated_capacity *= 1000; /* convert to µAh */
+
+	/* Calculate the full level at the present temperature. */
+	di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
+			      di->raw[DS2760_ACTIVE_FULL + 1];
+
+	scale[0] = di->raw[DS2760_ACTIVE_FULL] << 8 |
+		   di->raw[DS2760_ACTIVE_FULL + 1];
+	for (i = 1; i < 5; i++)
+		scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i];
+
+	di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10);
+	di->full_active_uAh *= 1000; /* convert to µAh */
+
+	/* Calculate the empty level at the present temperature. */
+	scale[4] = di->raw[DS2760_ACTIVE_EMPTY + 4];
+	for (i = 3; i >= 0; i--)
+		scale[i] = scale[i + 1] + di->raw[DS2760_ACTIVE_EMPTY + i];
+
+	di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
+	di->empty_uAh *= 1000; /* convert to µAh */
+
+	/* From Maxim Application Note 131: remaining capacity =
+	 * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+	di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+			    (di->full_active_uAh - di->empty_uAh);
+
+	if (di->rem_capacity < 0)
+		di->rem_capacity = 0;
+	if (di->rem_capacity > 100)
+		di->rem_capacity = 100;
+
+	if (di->current_uA)
+		di->life_sec = -((di->accum_current_uAh - di->empty_uAh) *
+				 3600L) / di->current_uA;
+	else
+		di->life_sec = 0;
+
+	return 0;
+}
+
+static void ds2760_battery_update_status(struct ds2760_device_info *di)
+{
+	int old_charge_status = di->charge_status;
+
+	ds2760_battery_read_status(di);
+
+	if (di->charge_status == POWER_SUPPLY_STATUS_UNKNOWN)
+		di->full_counter = 0;
+
+	if (power_supply_am_i_supplied(&di->bat)) {
+		if (di->current_uA > 10000) {
+			di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+			di->full_counter = 0;
+		} else if (di->current_uA < -5000) {
+			if (di->charge_status != POWER_SUPPLY_STATUS_NOT_CHARGING)
+				dev_notice(di->dev, "not enough power to "
+					   "charge\n");
+			di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			di->full_counter = 0;
+		} else if (di->current_uA < 10000 &&
+			    di->charge_status != POWER_SUPPLY_STATUS_FULL) {
+
+			/* Don't consider the battery to be full unless
+			 * we've seen the current < 10 mA at least two
+			 * consecutive times. */
+
+			di->full_counter++;
+
+			if (di->full_counter < 2) {
+				di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+			} else {
+				unsigned char acr[2];
+				int acr_val;
+
+				/* acr is in units of 0.25 mAh */
+				acr_val = di->full_active_uAh * 4L / 1000;
+
+				acr[0] = acr_val >> 8;
+				acr[1] = acr_val & 0xff;
+
+				if (w1_ds2760_write(di->w1_dev, acr,
+				    DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+					dev_warn(di->dev,
+						 "ACR reset failed\n");
+
+				di->charge_status = POWER_SUPPLY_STATUS_FULL;
+			}
+		}
+	} else {
+		di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+		di->full_counter = 0;
+	}
+
+	if (di->charge_status != old_charge_status)
+		power_supply_changed(&di->bat);
+
+	return;
+}
+
+static void ds2760_battery_work(struct work_struct *work)
+{
+	struct ds2760_device_info *di = container_of(work,
+		struct ds2760_device_info, monitor_work.work);
+	const int interval = HZ * 60;
+
+	dev_dbg(di->dev, "%s\n", __FUNCTION__);
+
+	ds2760_battery_update_status(di);
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, interval);
+
+	return;
+}
+
+#define to_ds2760_device_info(x) container_of((x), struct ds2760_device_info, \
+					      bat);
+
+static void ds2760_battery_external_power_changed(struct power_supply *psy)
+{
+	struct ds2760_device_info *di = to_ds2760_device_info(psy);
+
+	dev_dbg(di->dev, "%s\n", __FUNCTION__);
+
+	cancel_delayed_work(&di->monitor_work);
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
+
+	return;
+}
+
+static int ds2760_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct ds2760_device_info *di = to_ds2760_device_info(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = di->charge_status;
+		return 0;
+	default:
+		break;
+	}
+
+	ds2760_battery_read_status(di);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = di->voltage_uV;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = di->current_uA;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = di->rated_capacity;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		val->intval = di->full_active_uAh;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+		val->intval = di->empty_uAh;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		val->intval = di->accum_current_uAh;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = di->temp_C;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property ds2760_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_EMPTY,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static int ds2760_battery_probe(struct platform_device *pdev)
+{
+	int retval = 0;
+	struct ds2760_device_info *di;
+	struct ds2760_platform_data *pdata;
+
+	di = kzalloc(sizeof(*di), GFP_KERNEL);
+	if (!di) {
+		retval = -ENOMEM;
+		goto di_alloc_failed;
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	pdata = pdev->dev.platform_data;
+	di->dev		= &pdev->dev;
+	di->w1_dev	     = pdev->dev.parent;
+	di->bat.name	   = pdev->dev.bus_id;
+	di->bat.type	   = POWER_SUPPLY_TYPE_BATTERY;
+	di->bat.properties     = ds2760_battery_props;
+	di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props);
+	di->bat.get_property   = ds2760_battery_get_property;
+	di->bat.external_power_changed =
+				  ds2760_battery_external_power_changed;
+
+	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	retval = power_supply_register(&pdev->dev, &di->bat);
+	if (retval) {
+		dev_err(di->dev, "failed to register battery");
+		goto batt_failed;
+	}
+
+	INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
+	di->monitor_wqueue = create_singlethread_workqueue(pdev->dev.bus_id);
+	if (!di->monitor_wqueue) {
+		retval = -ESRCH;
+		goto workqueue_failed;
+	}
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
+
+	goto success;
+
+workqueue_failed:
+	power_supply_unregister(&di->bat);
+batt_failed:
+	kfree(di);
+di_alloc_failed:
+success:
+	return retval;
+}
+
+static int ds2760_battery_remove(struct platform_device *pdev)
+{
+	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+
+	cancel_rearming_delayed_workqueue(di->monitor_wqueue,
+					  &di->monitor_work);
+	destroy_workqueue(di->monitor_wqueue);
+	power_supply_unregister(&di->bat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int ds2760_battery_suspend(struct platform_device *pdev,
+				  pm_message_t state)
+{
+	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+
+	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	return 0;
+}
+
+static int ds2760_battery_resume(struct platform_device *pdev)
+{
+	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+
+	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+	power_supply_changed(&di->bat);
+
+	cancel_delayed_work(&di->monitor_work);
+	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
+
+	return 0;
+}
+
+#else
+
+#define ds2760_battery_suspend NULL
+#define ds2760_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver ds2760_battery_driver = {
+	.driver = {
+		.name = "ds2760-battery",
+	},
+	.probe	  = ds2760_battery_probe,
+	.remove   = ds2760_battery_remove,
+	.suspend  = ds2760_battery_suspend,
+	.resume	  = ds2760_battery_resume,
+};
+
+static int __init ds2760_battery_init(void)
+{
+	return platform_driver_register(&ds2760_battery_driver);
+}
+
+static void __exit ds2760_battery_exit(void)
+{
+	platform_driver_unregister(&ds2760_battery_driver);
+	return;
+}
+
+module_init(ds2760_battery_init);
+module_exit(ds2760_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
+	      "Matt Reimer <mreimer@vpop.net>, "
+	      "Anton Vorontsov <cbou@mail.ru>");
+MODULE_DESCRIPTION("ds2760 battery driver");
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
new file mode 100644
index 000000000000..878684df7667
--- /dev/null
+++ b/drivers/power/olpc_battery.c
@@ -0,0 +1,352 @@
+/*
+ * Battery driver for One Laptop Per Child board.
+ *
+ *	Copyright © 2006  David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <asm/olpc.h>
+
+
+#define EC_BAT_VOLTAGE	0x10	/* uint16_t,	*9.76/32,    mV   */
+#define EC_BAT_CURRENT	0x11	/* int16_t,	*15.625/120, mA   */
+#define EC_BAT_ACR	0x12
+#define EC_BAT_TEMP	0x13	/* uint16_t,	*100/256,   °C  */
+#define EC_AMB_TEMP	0x14	/* uint16_t,	*100/256,   °C  */
+#define EC_BAT_STATUS	0x15	/* uint8_t,	bitmask */
+#define EC_BAT_SOC	0x16	/* uint8_t,	percentage */
+#define EC_BAT_SERIAL	0x17	/* uint8_t[6] */
+#define EC_BAT_EEPROM	0x18	/* uint8_t adr as input, uint8_t output */
+#define EC_BAT_ERRCODE	0x1f	/* uint8_t,	bitmask */
+
+#define BAT_STAT_PRESENT	0x01
+#define BAT_STAT_FULL		0x02
+#define BAT_STAT_LOW		0x04
+#define BAT_STAT_DESTROY	0x08
+#define BAT_STAT_AC		0x10
+#define BAT_STAT_CHARGING	0x20
+#define BAT_STAT_DISCHARGING	0x40
+
+#define BAT_ERR_INFOFAIL	0x02
+#define BAT_ERR_OVERVOLTAGE	0x04
+#define BAT_ERR_OVERTEMP	0x05
+#define BAT_ERR_GAUGESTOP	0x06
+#define BAT_ERR_OUT_OF_CONTROL	0x07
+#define BAT_ERR_ID_FAIL		0x09
+#define BAT_ERR_ACR_FAIL	0x10
+
+#define BAT_ADDR_MFR_TYPE	0x5F
+
+/*********************************************************************
+ *		Power
+ *********************************************************************/
+
+static int olpc_ac_get_prop(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	uint8_t status;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
+		if (ret)
+			return ret;
+
+		val->intval = !!(status & BAT_STAT_AC);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property olpc_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static struct power_supply olpc_ac = {
+	.name = "olpc-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = olpc_ac_props,
+	.num_properties = ARRAY_SIZE(olpc_ac_props),
+	.get_property = olpc_ac_get_prop,
+};
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+static int olpc_bat_get_property(struct power_supply *psy,
+				 enum power_supply_property psp,
+				 union power_supply_propval *val)
+{
+	int ret = 0;
+	int16_t ec_word;
+	uint8_t ec_byte;
+
+	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
+	if (ret)
+		return ret;
+
+	/* Theoretically there's a race here -- the battery could be
+	   removed immediately after we check whether it's present, and
+	   then we query for some other property of the now-absent battery.
+	   It doesn't matter though -- the EC will return the last-known
+	   information, and it's as if we just ran that _little_ bit faster
+	   and managed to read it out before the battery went away. */
+	if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+		return -ENODEV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (olpc_platform_info.ecver > 0x44) {
+			if (ec_byte & BAT_STAT_CHARGING)
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			else if (ec_byte & BAT_STAT_DISCHARGING)
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			else if (ec_byte & BAT_STAT_FULL)
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else /* er,... */
+				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		} else {
+			/* Older EC didn't report charge/discharge bits */
+			if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			else if (ec_byte & BAT_STAT_FULL)
+				val->intval = POWER_SUPPLY_STATUS_FULL;
+			else /* Not _necessarily_ true but EC doesn't tell all yet */
+				val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		}
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+		break;
+
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (ec_byte & BAT_STAT_DESTROY)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else {
+			ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+			if (ret)
+				return ret;
+
+			switch (ec_byte) {
+			case 0:
+				val->intval = POWER_SUPPLY_HEALTH_GOOD;
+				break;
+
+			case BAT_ERR_OVERTEMP:
+				val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+				break;
+
+			case BAT_ERR_OVERVOLTAGE:
+				val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+				break;
+
+			case BAT_ERR_INFOFAIL:
+			case BAT_ERR_OUT_OF_CONTROL:
+			case BAT_ERR_ID_FAIL:
+			case BAT_ERR_ACR_FAIL:
+				val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+				break;
+
+			default:
+				/* Eep. We don't know this failure code */
+				return -EIO;
+			}
+		}
+		break;
+
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		ec_byte = BAT_ADDR_MFR_TYPE;
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		if (ret)
+			return ret;
+
+		switch (ec_byte >> 4) {
+		case 1:
+			val->strval = "Gold Peak";
+			break;
+		case 2:
+			val->strval = "BYD";
+			break;
+		default:
+			val->strval = "Unknown";
+			break;
+		}
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		ec_byte = BAT_ADDR_MFR_TYPE;
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+		if (ret)
+			return ret;
+
+		switch (ec_byte & 0xf) {
+		case 1:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+			break;
+		case 2:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+			break;
+		}
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		ec_word = be16_to_cpu(ec_word);
+		val->intval = ec_word * 9760L / 32;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		ec_word = be16_to_cpu(ec_word);
+		val->intval = ec_word * 15625L / 120;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &ec_byte, 1);
+		if (ret)
+			return ret;
+		val->intval = ec_byte;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		if (ec_byte & BAT_STAT_FULL)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+		else if (ec_byte & BAT_STAT_LOW)
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		else
+			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+		ec_word = be16_to_cpu(ec_word);
+		val->intval = ec_word * 100 / 256;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_AMBIENT:
+		ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2);
+		if (ret)
+			return ret;
+
+		ec_word = be16_to_cpu(ec_word);
+		val->intval = ec_word * 100 / 256;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property olpc_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TEMP_AMBIENT,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static struct platform_device *bat_pdev;
+
+static struct power_supply olpc_bat = {
+	.properties = olpc_bat_props,
+	.num_properties = ARRAY_SIZE(olpc_bat_props),
+	.get_property = olpc_bat_get_property,
+	.use_for_apm = 1,
+};
+
+void olpc_battery_trigger_uevent(unsigned long cause)
+{
+	if (cause & EC_SCI_SRC_ACPWR)
+		kobject_uevent(&olpc_ac.dev->kobj, KOBJ_CHANGE);
+	if (cause & (EC_SCI_SRC_BATERR|EC_SCI_SRC_BATSOC|EC_SCI_SRC_BATTERY))
+		kobject_uevent(&olpc_bat.dev->kobj, KOBJ_CHANGE);
+}
+
+static int __init olpc_bat_init(void)
+{
+	int ret = 0;
+	uint8_t status;
+
+	if (!olpc_platform_info.ecver)
+		return -ENXIO;
+	if (olpc_platform_info.ecver < 0x43) {
+		printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver);
+		return -ENXIO;
+	}
+
+	ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
+	if (ret)
+		return ret;
+
+	/* Ignore the status. It doesn't actually matter */
+
+	bat_pdev = platform_device_register_simple("olpc-battery", 0, NULL, 0);
+	if (IS_ERR(bat_pdev))
+		return PTR_ERR(bat_pdev);
+
+	ret = power_supply_register(&bat_pdev->dev, &olpc_ac);
+	if (ret)
+		goto ac_failed;
+
+	olpc_bat.name = bat_pdev->name;
+
+	ret = power_supply_register(&bat_pdev->dev, &olpc_bat);
+	if (ret)
+		goto battery_failed;
+
+	olpc_register_battery_callback(&olpc_battery_trigger_uevent);
+	goto success;
+
+battery_failed:
+	power_supply_unregister(&olpc_ac);
+ac_failed:
+	platform_device_unregister(bat_pdev);
+success:
+	return ret;
+}
+
+static void __exit olpc_bat_exit(void)
+{
+	olpc_deregister_battery_callback();
+	power_supply_unregister(&olpc_bat);
+	power_supply_unregister(&olpc_ac);
+	platform_device_unregister(bat_pdev);
+	return;
+}
+
+module_init(olpc_bat_init);
+module_exit(olpc_bat_exit);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for One Laptop Per Child 'XO' machine");
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
new file mode 100644
index 000000000000..4e1eb040e148
--- /dev/null
+++ b/drivers/power/pda_power.c
@@ -0,0 +1,261 @@
+/*
+ * Common power driver for PDAs and phones with one or two external
+ * power supplies (AC/USB) connected to main and backup batteries,
+ * and optional builtin charger.
+ *
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+
+static inline unsigned int get_irq_flags(struct resource *res)
+{
+	unsigned int flags = IRQF_DISABLED | IRQF_SHARED;
+
+	flags |= res->flags & IRQF_TRIGGER_MASK;
+
+	return flags;
+}
+
+static struct device *dev;
+static struct pda_power_pdata *pdata;
+static struct resource *ac_irq, *usb_irq;
+static struct timer_list charger_timer;
+static struct timer_list supply_timer;
+
+static int pda_power_get_property(struct power_supply *psy,
+				  enum power_supply_property psp,
+				  union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		if (psy->type == POWER_SUPPLY_TYPE_MAINS)
+			val->intval = pdata->is_ac_online ?
+				      pdata->is_ac_online() : 0;
+		else
+			val->intval = pdata->is_usb_online ?
+				      pdata->is_usb_online() : 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property pda_power_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static char *pda_power_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct power_supply pda_power_supplies[] = {
+	{
+		.name = "ac",
+		.type = POWER_SUPPLY_TYPE_MAINS,
+		.supplied_to = pda_power_supplied_to,
+		.num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+		.properties = pda_power_props,
+		.num_properties = ARRAY_SIZE(pda_power_props),
+		.get_property = pda_power_get_property,
+	},
+	{
+		.name = "usb",
+		.type = POWER_SUPPLY_TYPE_USB,
+		.supplied_to = pda_power_supplied_to,
+		.num_supplicants = ARRAY_SIZE(pda_power_supplied_to),
+		.properties = pda_power_props,
+		.num_properties = ARRAY_SIZE(pda_power_props),
+		.get_property = pda_power_get_property,
+	},
+};
+
+static void update_charger(void)
+{
+	if (!pdata->set_charge)
+		return;
+
+	if (pdata->is_ac_online && pdata->is_ac_online()) {
+		dev_dbg(dev, "charger on (AC)\n");
+		pdata->set_charge(PDA_POWER_CHARGE_AC);
+	} else if (pdata->is_usb_online && pdata->is_usb_online()) {
+		dev_dbg(dev, "charger on (USB)\n");
+		pdata->set_charge(PDA_POWER_CHARGE_USB);
+	} else {
+		dev_dbg(dev, "charger off\n");
+		pdata->set_charge(0);
+	}
+
+	return;
+}
+
+static void supply_timer_func(unsigned long irq)
+{
+	if (ac_irq && irq == ac_irq->start)
+		power_supply_changed(&pda_power_supplies[0]);
+	else if (usb_irq && irq == usb_irq->start)
+		power_supply_changed(&pda_power_supplies[1]);
+	return;
+}
+
+static void charger_timer_func(unsigned long irq)
+{
+	update_charger();
+
+	/* Okay, charger set. Now wait a bit before notifying supplicants,
+	 * charge power should stabilize. */
+	supply_timer.data = irq;
+	mod_timer(&supply_timer,
+		  jiffies + msecs_to_jiffies(pdata->wait_for_charger));
+	return;
+}
+
+static irqreturn_t power_changed_isr(int irq, void *unused)
+{
+	/* Wait a bit before reading ac/usb line status and setting charger,
+	 * because ac/usb status readings may lag from irq. */
+	charger_timer.data = irq;
+	mod_timer(&charger_timer,
+		  jiffies + msecs_to_jiffies(pdata->wait_for_status));
+	return IRQ_HANDLED;
+}
+
+static int pda_power_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	dev = &pdev->dev;
+
+	if (pdev->id != -1) {
+		dev_err(dev, "it's meaningless to register several "
+			"pda_powers; use id = -1\n");
+		ret = -EINVAL;
+		goto wrongid;
+	}
+
+	pdata = pdev->dev.platform_data;
+
+	update_charger();
+
+	if (!pdata->wait_for_status)
+		pdata->wait_for_status = 500;
+
+	if (!pdata->wait_for_charger)
+		pdata->wait_for_charger = 500;
+
+	setup_timer(&charger_timer, charger_timer_func, 0);
+	setup_timer(&supply_timer, supply_timer_func, 0);
+
+	ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
+	usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
+	if (!ac_irq && !usb_irq) {
+		dev_err(dev, "no ac/usb irq specified\n");
+		ret = -ENODEV;
+		goto noirqs;
+	}
+
+	if (pdata->supplied_to) {
+		pda_power_supplies[0].supplied_to = pdata->supplied_to;
+		pda_power_supplies[1].supplied_to = pdata->supplied_to;
+		pda_power_supplies[0].num_supplicants = pdata->num_supplicants;
+		pda_power_supplies[1].num_supplicants = pdata->num_supplicants;
+	}
+
+	ret = power_supply_register(&pdev->dev, &pda_power_supplies[0]);
+	if (ret) {
+		dev_err(dev, "failed to register %s power supply\n",
+			pda_power_supplies[0].name);
+		goto supply0_failed;
+	}
+
+	ret = power_supply_register(&pdev->dev, &pda_power_supplies[1]);
+	if (ret) {
+		dev_err(dev, "failed to register %s power supply\n",
+			pda_power_supplies[1].name);
+		goto supply1_failed;
+	}
+
+	if (ac_irq) {
+		ret = request_irq(ac_irq->start, power_changed_isr,
+				  get_irq_flags(ac_irq), ac_irq->name,
+				  &pda_power_supplies[0]);
+		if (ret) {
+			dev_err(dev, "request ac irq failed\n");
+			goto ac_irq_failed;
+		}
+	}
+
+	if (usb_irq) {
+		ret = request_irq(usb_irq->start, power_changed_isr,
+				  get_irq_flags(usb_irq), usb_irq->name,
+				  &pda_power_supplies[1]);
+		if (ret) {
+			dev_err(dev, "request usb irq failed\n");
+			goto usb_irq_failed;
+		}
+	}
+
+	goto success;
+
+usb_irq_failed:
+	if (ac_irq)
+		free_irq(ac_irq->start, &pda_power_supplies[0]);
+ac_irq_failed:
+	power_supply_unregister(&pda_power_supplies[1]);
+supply1_failed:
+	power_supply_unregister(&pda_power_supplies[0]);
+supply0_failed:
+noirqs:
+wrongid:
+success:
+	return ret;
+}
+
+static int pda_power_remove(struct platform_device *pdev)
+{
+	if (usb_irq)
+		free_irq(usb_irq->start, &pda_power_supplies[1]);
+	if (ac_irq)
+		free_irq(ac_irq->start, &pda_power_supplies[0]);
+	del_timer_sync(&charger_timer);
+	del_timer_sync(&supply_timer);
+	power_supply_unregister(&pda_power_supplies[1]);
+	power_supply_unregister(&pda_power_supplies[0]);
+	return 0;
+}
+
+static struct platform_driver pda_power_pdrv = {
+	.driver = {
+		.name = "pda-power",
+	},
+	.probe = pda_power_probe,
+	.remove = pda_power_remove,
+};
+
+static int __init pda_power_init(void)
+{
+	return platform_driver_register(&pda_power_pdrv);
+}
+
+static void __exit pda_power_exit(void)
+{
+	platform_driver_unregister(&pda_power_pdrv);
+	return;
+}
+
+module_init(pda_power_init);
+module_exit(pda_power_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
diff --git a/drivers/power/pmu_battery.c b/drivers/power/pmu_battery.c
new file mode 100644
index 000000000000..2fea4af0e40a
--- /dev/null
+++ b/drivers/power/pmu_battery.c
@@ -0,0 +1,215 @@
+/*
+ * Battery class driver for Apple PMU
+ *
+ *	Copyright © 2006  David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+static struct pmu_battery_dev {
+	struct power_supply bat;
+	struct pmu_battery_info *pbi;
+	char name[16];
+	int propval;
+} *pbats[PMU_MAX_BATTERIES];
+
+#define to_pmu_battery_dev(x) container_of(x, struct pmu_battery_dev, bat)
+
+/*********************************************************************
+ *		Power
+ *********************************************************************/
+
+static int pmu_get_ac_prop(struct power_supply *psy,
+			   enum power_supply_property psp,
+			   union power_supply_propval *val)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = (!!(pmu_power_flags & PMU_PWR_AC_PRESENT)) ||
+			      (pmu_battery_count == 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property pmu_ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static struct power_supply pmu_ac = {
+	.name = "pmu-ac",
+	.type = POWER_SUPPLY_TYPE_MAINS,
+	.properties = pmu_ac_props,
+	.num_properties = ARRAY_SIZE(pmu_ac_props),
+	.get_property = pmu_get_ac_prop,
+};
+
+/*********************************************************************
+ *		Battery properties
+ *********************************************************************/
+
+static char *pmu_batt_types[] = {
+	"Smart", "Comet", "Hooper", "Unknown"
+};
+
+static char *pmu_bat_get_model_name(struct pmu_battery_info *pbi)
+{
+	switch (pbi->flags & PMU_BATT_TYPE_MASK) {
+	case PMU_BATT_TYPE_SMART:
+		return pmu_batt_types[0];
+	case PMU_BATT_TYPE_COMET:
+		return pmu_batt_types[1];
+	case PMU_BATT_TYPE_HOOPER:
+		return pmu_batt_types[2];
+	default: break;
+	}
+	return pmu_batt_types[3];
+}
+
+static int pmu_bat_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct pmu_battery_dev *pbat = to_pmu_battery_dev(psy);
+	struct pmu_battery_info *pbi = pbat->pbi;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (pbi->flags & PMU_BATT_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = !!(pbi->flags & PMU_BATT_PRESENT);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = pmu_bat_get_model_name(pbi);
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_AVG:
+		val->intval = pbi->charge     * 1000; /* mWh -> µWh */
+		break;
+	case POWER_SUPPLY_PROP_ENERGY_FULL:
+		val->intval = pbi->max_charge * 1000; /* mWh -> µWh */
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		val->intval = pbi->amperage   * 1000; /* mA -> µA */
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		val->intval = pbi->voltage    * 1000; /* mV -> µV */
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+		val->intval = pbi->time_remaining;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static enum power_supply_property pmu_bat_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_ENERGY_AVG,
+	POWER_SUPPLY_PROP_ENERGY_FULL,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+};
+
+/*********************************************************************
+ *		Initialisation
+ *********************************************************************/
+
+static struct platform_device *bat_pdev;
+
+static int __init pmu_bat_init(void)
+{
+	int ret;
+	int i;
+
+	bat_pdev = platform_device_register_simple("pmu-battery",
+						   0, NULL, 0);
+	if (IS_ERR(bat_pdev)) {
+		ret = PTR_ERR(bat_pdev);
+		goto pdev_register_failed;
+	}
+
+	ret = power_supply_register(&bat_pdev->dev, &pmu_ac);
+	if (ret)
+		goto ac_register_failed;
+
+	for (i = 0; i < pmu_battery_count; i++) {
+		struct pmu_battery_dev *pbat = kzalloc(sizeof(*pbat),
+						       GFP_KERNEL);
+		if (!pbat)
+			break;
+
+		sprintf(pbat->name, "PMU battery %d", i);
+		pbat->bat.name = pbat->name;
+		pbat->bat.properties = pmu_bat_props;
+		pbat->bat.num_properties = ARRAY_SIZE(pmu_bat_props);
+		pbat->bat.get_property = pmu_bat_get_property;
+		pbat->pbi = &pmu_batteries[i];
+
+		ret = power_supply_register(&bat_pdev->dev, &pbat->bat);
+		if (ret) {
+			kfree(pbat);
+			goto battery_register_failed;
+		}
+		pbats[i] = pbat;
+	}
+
+	goto success;
+
+battery_register_failed:
+	while (i--) {
+		if (!pbats[i])
+			continue;
+		power_supply_unregister(&pbats[i]->bat);
+		kfree(pbats[i]);
+	}
+	power_supply_unregister(&pmu_ac);
+ac_register_failed:
+	platform_device_unregister(bat_pdev);
+pdev_register_failed:
+success:
+	return ret;
+}
+
+static void __exit pmu_bat_exit(void)
+{
+	int i;
+
+	for (i = 0; i < PMU_MAX_BATTERIES; i++) {
+		if (!pbats[i])
+			continue;
+		power_supply_unregister(&pbats[i]->bat);
+		kfree(pbats[i]);
+	}
+	power_supply_unregister(&pmu_ac);
+	platform_device_unregister(bat_pdev);
+
+	return;
+}
+
+module_init(pmu_bat_init);
+module_exit(pmu_bat_exit);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PMU battery driver");
diff --git a/drivers/power/power_supply.h b/drivers/power/power_supply.h
new file mode 100644
index 000000000000..a9880d468ee4
--- /dev/null
+++ b/drivers/power/power_supply.h
@@ -0,0 +1,42 @@
+/*
+ *  Functions private to power supply class
+ *
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#ifdef CONFIG_SYSFS
+
+extern int power_supply_create_attrs(struct power_supply *psy);
+extern void power_supply_remove_attrs(struct power_supply *psy);
+extern int power_supply_uevent(struct device *dev, char **envp, int num_envp,
+			       char *buffer, int buffer_size);
+
+#else
+
+static inline int power_supply_create_attrs(struct power_supply *psy)
+{ return 0; }
+static inline void power_supply_remove_attrs(struct power_supply *psy) {}
+#define power_supply_uevent NULL
+
+#endif /* CONFIG_SYSFS */
+
+#ifdef CONFIG_LEDS_TRIGGERS
+
+extern void power_supply_update_leds(struct power_supply *psy);
+extern int power_supply_create_triggers(struct power_supply *psy);
+extern void power_supply_remove_triggers(struct power_supply *psy);
+
+#else
+
+static inline void power_supply_update_leds(struct power_supply *psy) {}
+static inline int power_supply_create_triggers(struct power_supply *psy)
+{ return 0; }
+static inline void power_supply_remove_triggers(struct power_supply *psy) {}
+
+#endif /* CONFIG_LEDS_TRIGGERS */
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
new file mode 100644
index 000000000000..e87ea5156755
--- /dev/null
+++ b/drivers/power/power_supply_core.c
@@ -0,0 +1,168 @@
+/*
+ *  Universal power supply monitor class
+ *
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include "power_supply.h"
+
+struct class *power_supply_class;
+
+static void power_supply_changed_work(struct work_struct *work)
+{
+	struct power_supply *psy = container_of(work, struct power_supply,
+						changed_work);
+	int i;
+
+	dev_dbg(psy->dev, "%s\n", __FUNCTION__);
+
+	for (i = 0; i < psy->num_supplicants; i++) {
+		struct device *dev;
+
+		down(&power_supply_class->sem);
+		list_for_each_entry(dev, &power_supply_class->devices, node) {
+			struct power_supply *pst = dev_get_drvdata(dev);
+
+			if (!strcmp(psy->supplied_to[i], pst->name)) {
+				if (pst->external_power_changed)
+					pst->external_power_changed(pst);
+			}
+		}
+		up(&power_supply_class->sem);
+	}
+
+	power_supply_update_leds(psy);
+
+	kobject_uevent(&psy->dev->kobj, KOBJ_CHANGE);
+
+	return;
+}
+
+void power_supply_changed(struct power_supply *psy)
+{
+	dev_dbg(psy->dev, "%s\n", __FUNCTION__);
+
+	schedule_work(&psy->changed_work);
+
+	return;
+}
+
+int power_supply_am_i_supplied(struct power_supply *psy)
+{
+	union power_supply_propval ret = {0,};
+	struct device *dev;
+
+	down(&power_supply_class->sem);
+	list_for_each_entry(dev, &power_supply_class->devices, node) {
+		struct power_supply *epsy = dev_get_drvdata(dev);
+		int i;
+
+		for (i = 0; i < epsy->num_supplicants; i++) {
+			if (!strcmp(epsy->supplied_to[i], psy->name)) {
+				if (epsy->get_property(epsy,
+					  POWER_SUPPLY_PROP_ONLINE, &ret))
+					continue;
+				if (ret.intval)
+					goto out;
+			}
+		}
+	}
+out:
+	up(&power_supply_class->sem);
+
+	dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, ret.intval);
+
+	return ret.intval;
+}
+
+int power_supply_register(struct device *parent, struct power_supply *psy)
+{
+	int rc = 0;
+
+	psy->dev = device_create(power_supply_class, parent, 0,
+				 "%s", psy->name);
+	if (IS_ERR(psy->dev)) {
+		rc = PTR_ERR(psy->dev);
+		goto dev_create_failed;
+	}
+
+	dev_set_drvdata(psy->dev, psy);
+
+	INIT_WORK(&psy->changed_work, power_supply_changed_work);
+
+	rc = power_supply_create_attrs(psy);
+	if (rc)
+		goto create_attrs_failed;
+
+	rc = power_supply_create_triggers(psy);
+	if (rc)
+		goto create_triggers_failed;
+
+	power_supply_changed(psy);
+
+	goto success;
+
+create_triggers_failed:
+	power_supply_remove_attrs(psy);
+create_attrs_failed:
+	device_unregister(psy->dev);
+dev_create_failed:
+success:
+	return rc;
+}
+
+void power_supply_unregister(struct power_supply *psy)
+{
+	flush_scheduled_work();
+	power_supply_remove_triggers(psy);
+	power_supply_remove_attrs(psy);
+	device_unregister(psy->dev);
+	return;
+}
+
+static int __init power_supply_class_init(void)
+{
+	power_supply_class = class_create(THIS_MODULE, "power_supply");
+
+	if (IS_ERR(power_supply_class))
+		return PTR_ERR(power_supply_class);
+
+	power_supply_class->dev_uevent = power_supply_uevent;
+
+	return 0;
+}
+
+static void __exit power_supply_class_exit(void)
+{
+	class_destroy(power_supply_class);
+	return;
+}
+
+EXPORT_SYMBOL_GPL(power_supply_changed);
+EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
+EXPORT_SYMBOL_GPL(power_supply_register);
+EXPORT_SYMBOL_GPL(power_supply_unregister);
+
+/* exported for the APM Power driver, APM emulation */
+EXPORT_SYMBOL_GPL(power_supply_class);
+
+subsys_initcall(power_supply_class_init);
+module_exit(power_supply_class_exit);
+
+MODULE_DESCRIPTION("Universal power supply monitor class");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>, "
+	      "Szabolcs Gyurko, "
+	      "Anton Vorontsov <cbou@mail.ru>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/power_supply_leds.c b/drivers/power/power_supply_leds.c
new file mode 100644
index 000000000000..7232490bb595
--- /dev/null
+++ b/drivers/power/power_supply_leds.c
@@ -0,0 +1,176 @@
+/*
+ *  LEDs triggers for power supply class
+ *
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#include <linux/power_supply.h>
+
+/* Battery specific LEDs triggers. */
+
+static void power_supply_update_bat_leds(struct power_supply *psy)
+{
+	union power_supply_propval status;
+
+	if (psy->get_property(psy, POWER_SUPPLY_PROP_STATUS, &status))
+		return;
+
+	dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, status.intval);
+
+	switch (status.intval) {
+	case POWER_SUPPLY_STATUS_FULL:
+		led_trigger_event(psy->charging_full_trig, LED_FULL);
+		led_trigger_event(psy->charging_trig, LED_OFF);
+		led_trigger_event(psy->full_trig, LED_FULL);
+		break;
+	case POWER_SUPPLY_STATUS_CHARGING:
+		led_trigger_event(psy->charging_full_trig, LED_FULL);
+		led_trigger_event(psy->charging_trig, LED_FULL);
+		led_trigger_event(psy->full_trig, LED_OFF);
+		break;
+	default:
+		led_trigger_event(psy->charging_full_trig, LED_OFF);
+		led_trigger_event(psy->charging_trig, LED_OFF);
+		led_trigger_event(psy->full_trig, LED_OFF);
+		break;
+	}
+
+	return;
+}
+
+static int power_supply_create_bat_triggers(struct power_supply *psy)
+{
+	int rc = 0;
+
+	psy->charging_full_trig_name = kmalloc(strlen(psy->name) +
+				  sizeof("-charging-or-full"), GFP_KERNEL);
+	if (!psy->charging_full_trig_name)
+		goto charging_full_failed;
+
+	psy->charging_trig_name = kmalloc(strlen(psy->name) +
+					  sizeof("-charging"), GFP_KERNEL);
+	if (!psy->charging_trig_name)
+		goto charging_failed;
+
+	psy->full_trig_name = kmalloc(strlen(psy->name) +
+				      sizeof("-full"), GFP_KERNEL);
+	if (!psy->full_trig_name)
+		goto full_failed;
+
+	strcpy(psy->charging_full_trig_name, psy->name);
+	strcat(psy->charging_full_trig_name, "-charging-or-full");
+	strcpy(psy->charging_trig_name, psy->name);
+	strcat(psy->charging_trig_name, "-charging");
+	strcpy(psy->full_trig_name, psy->name);
+	strcat(psy->full_trig_name, "-full");
+
+	led_trigger_register_simple(psy->charging_full_trig_name,
+				    &psy->charging_full_trig);
+	led_trigger_register_simple(psy->charging_trig_name,
+				    &psy->charging_trig);
+	led_trigger_register_simple(psy->full_trig_name,
+				    &psy->full_trig);
+
+	goto success;
+
+full_failed:
+	kfree(psy->charging_trig_name);
+charging_failed:
+	kfree(psy->charging_full_trig_name);
+charging_full_failed:
+	rc = -ENOMEM;
+success:
+	return rc;
+}
+
+static void power_supply_remove_bat_triggers(struct power_supply *psy)
+{
+	led_trigger_unregister_simple(psy->charging_full_trig);
+	led_trigger_unregister_simple(psy->charging_trig);
+	led_trigger_unregister_simple(psy->full_trig);
+	kfree(psy->full_trig_name);
+	kfree(psy->charging_trig_name);
+	kfree(psy->charging_full_trig_name);
+	return;
+}
+
+/* Generated power specific LEDs triggers. */
+
+static void power_supply_update_gen_leds(struct power_supply *psy)
+{
+	union power_supply_propval online;
+
+	if (psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &online))
+		return;
+
+	dev_dbg(psy->dev, "%s %d\n", __FUNCTION__, online.intval);
+
+	if (online.intval)
+		led_trigger_event(psy->online_trig, LED_FULL);
+	else
+		led_trigger_event(psy->online_trig, LED_OFF);
+
+	return;
+}
+
+static int power_supply_create_gen_triggers(struct power_supply *psy)
+{
+	int rc = 0;
+
+	psy->online_trig_name = kmalloc(strlen(psy->name) + sizeof("-online"),
+					GFP_KERNEL);
+	if (!psy->online_trig_name)
+		goto online_failed;
+
+	strcpy(psy->online_trig_name, psy->name);
+	strcat(psy->online_trig_name, "-online");
+
+	led_trigger_register_simple(psy->online_trig_name, &psy->online_trig);
+
+	goto success;
+
+online_failed:
+	rc = -ENOMEM;
+success:
+	return rc;
+}
+
+static void power_supply_remove_gen_triggers(struct power_supply *psy)
+{
+	led_trigger_unregister_simple(psy->online_trig);
+	kfree(psy->online_trig_name);
+	return;
+}
+
+/* Choice what triggers to create&update. */
+
+void power_supply_update_leds(struct power_supply *psy)
+{
+	if (psy->type == POWER_SUPPLY_TYPE_BATTERY)
+		power_supply_update_bat_leds(psy);
+	else
+		power_supply_update_gen_leds(psy);
+	return;
+}
+
+int power_supply_create_triggers(struct power_supply *psy)
+{
+	if (psy->type == POWER_SUPPLY_TYPE_BATTERY)
+		return power_supply_create_bat_triggers(psy);
+	return power_supply_create_gen_triggers(psy);
+}
+
+void power_supply_remove_triggers(struct power_supply *psy)
+{
+	if (psy->type == POWER_SUPPLY_TYPE_BATTERY)
+		power_supply_remove_bat_triggers(psy);
+	else
+		power_supply_remove_gen_triggers(psy);
+	return;
+}
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
new file mode 100644
index 000000000000..c07d4258d347
--- /dev/null
+++ b/drivers/power/power_supply_sysfs.c
@@ -0,0 +1,299 @@
+/*
+ *  Sysfs interface for the universal power supply monitor class
+ *
+ *  Copyright © 2007  David Woodhouse <dwmw2@infradead.org>
+ *  Copyright © 2007  Anton Vorontsov <cbou@mail.ru>
+ *  Copyright © 2004  Szabolcs Gyurko
+ *  Copyright © 2003  Ian Molton <spyro@f2s.com>
+ *
+ *  Modified: 2004, Oct     Szabolcs Gyurko
+ *
+ *  You may use this code as per GPL version 2
+ */
+
+#include <linux/ctype.h>
+#include <linux/power_supply.h>
+
+/*
+ * This is because the name "current" breaks the device attr macro.
+ * The "current" word resolves to "(get_current())" so instead of
+ * "current" "(get_current())" appears in the sysfs.
+ *
+ * The source of this definition is the device.h which calls __ATTR
+ * macro in sysfs.h which calls the __stringify macro.
+ *
+ * Only modification that the name is not tried to be resolved
+ * (as a macro let's say).
+ */
+
+#define POWER_SUPPLY_ATTR(_name)					\
+{									\
+	.attr = { .name = #_name, .mode = 0444, .owner = THIS_MODULE },	\
+	.show = power_supply_show_property,				\
+	.store = NULL,							\
+}
+
+static struct device_attribute power_supply_attrs[];
+
+static ssize_t power_supply_show_property(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf) {
+	static char *status_text[] = {
+		"Unknown", "Charging", "Discharging", "Not charging", "Full"
+	};
+	static char *health_text[] = {
+		"Unknown", "Good", "Overheat", "Dead", "Over voltage",
+		"Unspecified failure"
+	};
+	static char *technology_text[] = {
+		"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd"
+	};
+	static char *capacity_level_text[] = {
+		"Unknown", "Critical", "Low", "Normal", "High", "Full"
+	};
+	ssize_t ret;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	const ptrdiff_t off = attr - power_supply_attrs;
+	union power_supply_propval value;
+
+	ret = psy->get_property(psy, off, &value);
+
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			dev_err(dev, "driver failed to report `%s' property\n",
+				attr->attr.name);
+		return ret;
+	}
+
+	if (off == POWER_SUPPLY_PROP_STATUS)
+		return sprintf(buf, "%s\n", status_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_HEALTH)
+		return sprintf(buf, "%s\n", health_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_TECHNOLOGY)
+		return sprintf(buf, "%s\n", technology_text[value.intval]);
+	else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
+		return sprintf(buf, "%s\n",
+			       capacity_level_text[value.intval]);
+	else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
+		return sprintf(buf, "%s\n", value.strval);
+
+	return sprintf(buf, "%d\n", value.intval);
+}
+
+/* Must be in the same order as POWER_SUPPLY_PROP_* */
+static struct device_attribute power_supply_attrs[] = {
+	/* Properties of type `int' */
+	POWER_SUPPLY_ATTR(status),
+	POWER_SUPPLY_ATTR(health),
+	POWER_SUPPLY_ATTR(present),
+	POWER_SUPPLY_ATTR(online),
+	POWER_SUPPLY_ATTR(technology),
+	POWER_SUPPLY_ATTR(voltage_max_design),
+	POWER_SUPPLY_ATTR(voltage_min_design),
+	POWER_SUPPLY_ATTR(voltage_now),
+	POWER_SUPPLY_ATTR(voltage_avg),
+	POWER_SUPPLY_ATTR(current_now),
+	POWER_SUPPLY_ATTR(current_avg),
+	POWER_SUPPLY_ATTR(charge_full_design),
+	POWER_SUPPLY_ATTR(charge_empty_design),
+	POWER_SUPPLY_ATTR(charge_full),
+	POWER_SUPPLY_ATTR(charge_empty),
+	POWER_SUPPLY_ATTR(charge_now),
+	POWER_SUPPLY_ATTR(charge_avg),
+	POWER_SUPPLY_ATTR(energy_full_design),
+	POWER_SUPPLY_ATTR(energy_empty_design),
+	POWER_SUPPLY_ATTR(energy_full),
+	POWER_SUPPLY_ATTR(energy_empty),
+	POWER_SUPPLY_ATTR(energy_now),
+	POWER_SUPPLY_ATTR(energy_avg),
+	POWER_SUPPLY_ATTR(capacity),
+	POWER_SUPPLY_ATTR(capacity_level),
+	POWER_SUPPLY_ATTR(temp),
+	POWER_SUPPLY_ATTR(temp_ambient),
+	POWER_SUPPLY_ATTR(time_to_empty_now),
+	POWER_SUPPLY_ATTR(time_to_empty_avg),
+	POWER_SUPPLY_ATTR(time_to_full_now),
+	POWER_SUPPLY_ATTR(time_to_full_avg),
+	/* Properties of type `const char *' */
+	POWER_SUPPLY_ATTR(model_name),
+	POWER_SUPPLY_ATTR(manufacturer),
+};
+
+static ssize_t power_supply_show_static_attrs(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf) {
+	static char *type_text[] = { "Battery", "UPS", "Mains", "USB" };
+	struct power_supply *psy = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", type_text[psy->type]);
+}
+
+static struct device_attribute power_supply_static_attrs[] = {
+	__ATTR(type, 0444, power_supply_show_static_attrs, NULL),
+};
+
+int power_supply_create_attrs(struct power_supply *psy)
+{
+	int rc = 0;
+	int i, j;
+
+	for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++) {
+		rc = device_create_file(psy->dev,
+			    &power_supply_static_attrs[i]);
+		if (rc)
+			goto statics_failed;
+	}
+
+	for (j = 0; j < psy->num_properties; j++) {
+		rc = device_create_file(psy->dev,
+			    &power_supply_attrs[psy->properties[j]]);
+		if (rc)
+			goto dynamics_failed;
+	}
+
+	goto succeed;
+
+dynamics_failed:
+	while (j--)
+		device_remove_file(psy->dev,
+			   &power_supply_attrs[psy->properties[j]]);
+statics_failed:
+	while (i--)
+		device_remove_file(psy->dev,
+			   &power_supply_static_attrs[psy->properties[i]]);
+succeed:
+	return rc;
+}
+
+void power_supply_remove_attrs(struct power_supply *psy)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(power_supply_static_attrs); i++)
+		device_remove_file(psy->dev,
+			    &power_supply_static_attrs[i]);
+
+	for (i = 0; i < psy->num_properties; i++)
+		device_remove_file(psy->dev,
+			    &power_supply_attrs[psy->properties[i]]);
+
+	return;
+}
+
+static char *kstruprdup(const char *str, gfp_t gfp)
+{
+	char *ret, *ustr;
+
+	ustr = ret = kmalloc(strlen(str) + 1, gfp);
+
+	if (!ret)
+		return NULL;
+
+	while (*str)
+		*ustr++ = toupper(*str++);
+
+	*ustr = 0;
+
+	return ret;
+}
+
+int power_supply_uevent(struct device *dev, char **envp, int num_envp,
+			char *buffer, int buffer_size)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	int i = 0, length = 0, ret = 0, j;
+	char *prop_buf;
+	char *attrname;
+
+	dev_dbg(dev, "uevent\n");
+
+	if (!psy) {
+		dev_dbg(dev, "No power supply yet\n");
+		return ret;
+	}
+
+	dev_dbg(dev, "POWER_SUPPLY_NAME=%s\n", psy->name);
+
+	ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size,
+			     &length, "POWER_SUPPLY_NAME=%s", psy->name);
+	if (ret)
+		return ret;
+
+	prop_buf = (char *)get_zeroed_page(GFP_KERNEL);
+	if (!prop_buf)
+		return -ENOMEM;
+
+	for (j = 0; j < ARRAY_SIZE(power_supply_static_attrs); j++) {
+		struct device_attribute *attr;
+		char *line;
+
+		attr = &power_supply_static_attrs[j];
+
+		ret = power_supply_show_static_attrs(dev, attr, prop_buf);
+		if (ret < 0)
+			goto out;
+
+		line = strchr(prop_buf, '\n');
+		if (line)
+			*line = 0;
+
+		attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
+		if (!attrname) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		dev_dbg(dev, "Static prop %s=%s\n", attrname, prop_buf);
+
+		ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size,
+				     &length, "POWER_SUPPLY_%s=%s",
+				     attrname, prop_buf);
+		kfree(attrname);
+		if (ret)
+			goto out;
+	}
+
+	dev_dbg(dev, "%zd dynamic props\n", psy->num_properties);
+
+	for (j = 0; j < psy->num_properties; j++) {
+		struct device_attribute *attr;
+		char *line;
+
+		attr = &power_supply_attrs[psy->properties[j]];
+
+		ret = power_supply_show_property(dev, attr, prop_buf);
+		if (ret == -ENODEV) {
+			/* When a battery is absent, we expect -ENODEV. Don't abort;
+			   send the uevent with at least the the PRESENT=0 property */
+			ret = 0;
+			continue;
+		}
+
+		if (ret < 0)
+			goto out;
+
+		line = strchr(prop_buf, '\n');
+		if (line)
+			*line = 0;
+
+		attrname = kstruprdup(attr->attr.name, GFP_KERNEL);
+		if (!attrname) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		dev_dbg(dev, "prop %s=%s\n", attrname, prop_buf);
+
+		ret = add_uevent_var(envp, num_envp, &i, buffer, buffer_size,
+				     &length, "POWER_SUPPLY_%s=%s",
+				     attrname, prop_buf);
+		kfree(attrname);
+		if (ret)
+			goto out;
+	}
+
+out:
+	free_page((unsigned long)prop_buf);
+
+	return ret;
+}
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
index eed91434417d..659e31164cf0 100644
--- a/drivers/rapidio/rio-sysfs.c
+++ b/drivers/rapidio/rio-sysfs.c
@@ -67,7 +67,8 @@ struct device_attribute rio_dev_attrs[] = {
 };
 
 static ssize_t
-rio_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+rio_read_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+		char *buf, loff_t off, size_t count)
 {
 	struct rio_dev *dev =
 	    to_rio_dev(container_of(kobj, struct device, kobj));
@@ -137,7 +138,8 @@ rio_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
 }
 
 static ssize_t
-rio_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+rio_write_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+		 char *buf, loff_t off, size_t count)
 {
 	struct rio_dev *dev =
 	    to_rio_dev(container_of(kobj, struct device, kobj));
@@ -197,7 +199,6 @@ static struct bin_attribute rio_config_attr = {
 	.attr = {
 		 .name = "config",
 		 .mode = S_IRUGO | S_IWUSR,
-		 .owner = THIS_MODULE,
 		 },
 	.size = 0x200000,
 	.read = rio_read_config,
diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c
index afa64c7fa2e2..f98a83a11aae 100644
--- a/drivers/rtc/rtc-ds1553.c
+++ b/drivers/rtc/rtc-ds1553.c
@@ -258,8 +258,9 @@ static const struct rtc_class_ops ds1553_rtc_ops = {
 	.ioctl		= ds1553_rtc_ioctl,
 };
 
-static ssize_t ds1553_nvram_read(struct kobject *kobj, char *buf,
-				 loff_t pos, size_t size)
+static ssize_t ds1553_nvram_read(struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t pos, size_t size)
 {
 	struct platform_device *pdev =
 		to_platform_device(container_of(kobj, struct device, kobj));
@@ -272,8 +273,9 @@ static ssize_t ds1553_nvram_read(struct kobject *kobj, char *buf,
 	return count;
 }
 
-static ssize_t ds1553_nvram_write(struct kobject *kobj, char *buf,
-				  loff_t pos, size_t size)
+static ssize_t ds1553_nvram_write(struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t pos, size_t size)
 {
 	struct platform_device *pdev =
 		to_platform_device(container_of(kobj, struct device, kobj));
@@ -290,7 +292,6 @@ static struct bin_attribute ds1553_nvram_attr = {
 	.attr = {
 		.name = "nvram",
 		.mode = S_IRUGO | S_IWUGO,
-		.owner = THIS_MODULE,
 	},
 	.size = RTC_OFFSET,
 	.read = ds1553_nvram_read,
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index d68288b389dc..d1778ae8bca5 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -127,8 +127,9 @@ static const struct rtc_class_ops ds1742_rtc_ops = {
 	.set_time	= ds1742_rtc_set_time,
 };
 
-static ssize_t ds1742_nvram_read(struct kobject *kobj, char *buf,
-				 loff_t pos, size_t size)
+static ssize_t ds1742_nvram_read(struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t pos, size_t size)
 {
 	struct platform_device *pdev =
 		to_platform_device(container_of(kobj, struct device, kobj));
@@ -141,8 +142,9 @@ static ssize_t ds1742_nvram_read(struct kobject *kobj, char *buf,
 	return count;
 }
 
-static ssize_t ds1742_nvram_write(struct kobject *kobj, char *buf,
-				  loff_t pos, size_t size)
+static ssize_t ds1742_nvram_write(struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t pos, size_t size)
 {
 	struct platform_device *pdev =
 		to_platform_device(container_of(kobj, struct device, kobj));
@@ -159,7 +161,6 @@ static struct bin_attribute ds1742_nvram_attr = {
 	.attr = {
 		.name = "nvram",
 		.mode = S_IRUGO | S_IWUGO,
-		.owner = THIS_MODULE,
 	},
 	.read = ds1742_nvram_read,
 	.write = ds1742_nvram_write,
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index af7596ef29e2..ce2f78de7a80 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -17,10 +17,11 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/err.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
@@ -30,25 +31,11 @@
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
-#include <asm/vr41xx/irq.h>
 
 MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
 MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
 MODULE_LICENSE("GPL");
 
-#define RTC1_TYPE1_START	0x0b0000c0UL
-#define RTC1_TYPE1_END		0x0b0000dfUL
-#define RTC2_TYPE1_START	0x0b0001c0UL
-#define RTC2_TYPE1_END		0x0b0001dfUL
-
-#define RTC1_TYPE2_START	0x0f000100UL
-#define RTC1_TYPE2_END		0x0f00011fUL
-#define RTC2_TYPE2_START	0x0f000120UL
-#define RTC2_TYPE2_END		0x0f00013fUL
-
-#define RTC1_SIZE		0x20
-#define RTC2_SIZE		0x20
-
 /* RTC 1 registers */
 #define ETIMELREG		0x00
 #define ETIMEMREG		0x02
@@ -98,13 +85,8 @@ static char rtc_name[] = "RTC";
 static unsigned long periodic_frequency;
 static unsigned long periodic_count;
 static unsigned int alarm_enabled;
-
-struct resource rtc_resource[2] = {
-	{	.name	= rtc_name,
-		.flags	= IORESOURCE_MEM,	},
-	{	.name	= rtc_name,
-		.flags	= IORESOURCE_MEM,	},
-};
+static int aie_irq = -1;
+static int pie_irq = -1;
 
 static inline unsigned long read_elapsed_second(void)
 {
@@ -150,8 +132,8 @@ static void vr41xx_rtc_release(struct device *dev)
 
 	spin_unlock_irq(&rtc_lock);
 
-	disable_irq(ELAPSEDTIME_IRQ);
-	disable_irq(RTCLONG1_IRQ);
+	disable_irq(aie_irq);
+	disable_irq(pie_irq);
 }
 
 static int vr41xx_rtc_read_time(struct device *dev, struct rtc_time *time)
@@ -209,14 +191,14 @@ static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
 	spin_lock_irq(&rtc_lock);
 
 	if (alarm_enabled)
-		disable_irq(ELAPSEDTIME_IRQ);
+		disable_irq(aie_irq);
 
 	rtc1_write(ECMPLREG, (uint16_t)(alarm_sec << 15));
 	rtc1_write(ECMPMREG, (uint16_t)(alarm_sec >> 1));
 	rtc1_write(ECMPHREG, (uint16_t)(alarm_sec >> 17));
 
 	if (wkalrm->enabled)
-		enable_irq(ELAPSEDTIME_IRQ);
+		enable_irq(aie_irq);
 
 	alarm_enabled = wkalrm->enabled;
 
@@ -234,7 +216,7 @@ static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
 		spin_lock_irq(&rtc_lock);
 
 		if (!alarm_enabled) {
-			enable_irq(ELAPSEDTIME_IRQ);
+			enable_irq(aie_irq);
 			alarm_enabled = 1;
 		}
 
@@ -244,17 +226,17 @@ static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
 		spin_lock_irq(&rtc_lock);
 
 		if (alarm_enabled) {
-			disable_irq(ELAPSEDTIME_IRQ);
+			disable_irq(aie_irq);
 			alarm_enabled = 0;
 		}
 
 		spin_unlock_irq(&rtc_lock);
 		break;
 	case RTC_PIE_ON:
-		enable_irq(RTCLONG1_IRQ);
+		enable_irq(pie_irq);
 		break;
 	case RTC_PIE_OFF:
-		disable_irq(RTCLONG1_IRQ);
+		disable_irq(pie_irq);
 		break;
 	case RTC_IRQP_READ:
 		return put_user(periodic_frequency, (unsigned long __user *)arg);
@@ -331,31 +313,37 @@ static const struct rtc_class_ops vr41xx_rtc_ops = {
 
 static int __devinit rtc_probe(struct platform_device *pdev)
 {
+	struct resource *res;
 	struct rtc_device *rtc;
-	unsigned int irq;
 	int retval;
 
-	if (pdev->num_resources != 2)
+	if (pdev->num_resources != 4)
 		return -EBUSY;
 
-	rtc1_base = ioremap(pdev->resource[0].start, RTC1_SIZE);
-	if (rtc1_base == NULL)
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
 		return -EBUSY;
 
-	rtc2_base = ioremap(pdev->resource[1].start, RTC2_SIZE);
-	if (rtc2_base == NULL) {
-		iounmap(rtc1_base);
-		rtc1_base = NULL;
+	rtc1_base = ioremap(res->start, res->end - res->start + 1);
+	if (!rtc1_base)
 		return -EBUSY;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		retval = -EBUSY;
+		goto err_rtc1_iounmap;
+	}
+
+	rtc2_base = ioremap(res->start, res->end - res->start + 1);
+	if (!rtc2_base) {
+		retval = -EBUSY;
+		goto err_rtc1_iounmap;
 	}
 
 	rtc = rtc_device_register(rtc_name, &pdev->dev, &vr41xx_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
-		iounmap(rtc1_base);
-		iounmap(rtc2_base);
-		rtc1_base = NULL;
-		rtc2_base = NULL;
-		return PTR_ERR(rtc);
+		retval = PTR_ERR(rtc);
+		goto err_iounmap_all;
 	}
 
 	spin_lock_irq(&rtc_lock);
@@ -368,35 +356,50 @@ static int __devinit rtc_probe(struct platform_device *pdev)
 
 	spin_unlock_irq(&rtc_lock);
 
-	irq = ELAPSEDTIME_IRQ;
-	retval = request_irq(irq, elapsedtime_interrupt, IRQF_DISABLED,
-	                     "elapsed_time", pdev);
-	if (retval == 0) {
-		irq = RTCLONG1_IRQ;
-		retval = request_irq(irq, rtclong1_interrupt, IRQF_DISABLED,
-		                     "rtclong1", pdev);
+	aie_irq = platform_get_irq(pdev, 0);
+	if (aie_irq < 0 || aie_irq >= NR_IRQS) {
+		retval = -EBUSY;
+		goto err_device_unregister;
 	}
 
-	if (retval < 0) {
-		printk(KERN_ERR "rtc: IRQ%d is busy\n", irq);
-		rtc_device_unregister(rtc);
-		if (irq == RTCLONG1_IRQ)
-			free_irq(ELAPSEDTIME_IRQ, NULL);
-		iounmap(rtc1_base);
-		iounmap(rtc2_base);
-		rtc1_base = NULL;
-		rtc2_base = NULL;
-		return retval;
-	}
+	retval = request_irq(aie_irq, elapsedtime_interrupt, IRQF_DISABLED,
+	                     "elapsed_time", pdev);
+	if (retval < 0)
+		goto err_device_unregister;
+
+	pie_irq = platform_get_irq(pdev, 1);
+	if (pie_irq < 0 || pie_irq >= NR_IRQS)
+		goto err_free_irq;
+
+	retval = request_irq(pie_irq, rtclong1_interrupt, IRQF_DISABLED,
+		             "rtclong1", pdev);
+	if (retval < 0)
+		goto err_free_irq;
 
 	platform_set_drvdata(pdev, rtc);
 
-	disable_irq(ELAPSEDTIME_IRQ);
-	disable_irq(RTCLONG1_IRQ);
+	disable_irq(aie_irq);
+	disable_irq(pie_irq);
 
 	printk(KERN_INFO "rtc: Real Time Clock of NEC VR4100 series\n");
 
 	return 0;
+
+err_free_irq:
+	free_irq(aie_irq, pdev);
+
+err_device_unregister:
+	rtc_device_unregister(rtc);
+
+err_iounmap_all:
+	iounmap(rtc2_base);
+	rtc2_base = NULL;
+
+err_rtc1_iounmap:
+	iounmap(rtc1_base);
+	rtc1_base = NULL;
+
+	return retval;
 }
 
 static int __devexit rtc_remove(struct platform_device *pdev)
@@ -404,23 +407,21 @@ static int __devexit rtc_remove(struct platform_device *pdev)
 	struct rtc_device *rtc;
 
 	rtc = platform_get_drvdata(pdev);
-	if (rtc != NULL)
+	if (rtc)
 		rtc_device_unregister(rtc);
 
 	platform_set_drvdata(pdev, NULL);
 
-	free_irq(ELAPSEDTIME_IRQ, NULL);
-	free_irq(RTCLONG1_IRQ, NULL);
-	if (rtc1_base != NULL)
+	free_irq(aie_irq, pdev);
+	free_irq(pie_irq, pdev);
+	if (rtc1_base)
 		iounmap(rtc1_base);
-	if (rtc2_base != NULL)
+	if (rtc2_base)
 		iounmap(rtc2_base);
 
 	return 0;
 }
 
-static struct platform_device *rtc_platform_device;
-
 static struct platform_driver rtc_platform_driver = {
 	.probe		= rtc_probe,
 	.remove		= __devexit_p(rtc_remove),
@@ -432,55 +433,12 @@ static struct platform_driver rtc_platform_driver = {
 
 static int __init vr41xx_rtc_init(void)
 {
-	int retval;
-
-	switch (current_cpu_data.cputype) {
-	case CPU_VR4111:
-	case CPU_VR4121:
-		rtc_resource[0].start = RTC1_TYPE1_START;
-		rtc_resource[0].end = RTC1_TYPE1_END;
-		rtc_resource[1].start = RTC2_TYPE1_START;
-		rtc_resource[1].end = RTC2_TYPE1_END;
-		break;
-	case CPU_VR4122:
-	case CPU_VR4131:
-	case CPU_VR4133:
-		rtc_resource[0].start = RTC1_TYPE2_START;
-		rtc_resource[0].end = RTC1_TYPE2_END;
-		rtc_resource[1].start = RTC2_TYPE2_START;
-		rtc_resource[1].end = RTC2_TYPE2_END;
-		break;
-	default:
-		return -ENODEV;
-		break;
-	}
-
-	rtc_platform_device = platform_device_alloc("RTC", -1);
-	if (rtc_platform_device == NULL)
-		return -ENOMEM;
-
-	retval = platform_device_add_resources(rtc_platform_device,
-				rtc_resource, ARRAY_SIZE(rtc_resource));
-
-	if (retval == 0)
-		retval = platform_device_add(rtc_platform_device);
-
-	if (retval < 0) {
-		platform_device_put(rtc_platform_device);
-		return retval;
-	}
-
-	retval = platform_driver_register(&rtc_platform_driver);
-	if (retval < 0)
-		platform_device_unregister(rtc_platform_device);
-
-	return retval;
+	return platform_driver_register(&rtc_platform_driver);
 }
 
 static void __exit vr41xx_rtc_exit(void)
 {
 	platform_driver_unregister(&rtc_platform_driver);
-	platform_device_unregister(rtc_platform_device);
 }
 
 module_init(vr41xx_rtc_init);
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index 513d1a611aab..b3fae357ca49 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -9,6 +9,9 @@
  *
  * based on a lot of other RTC drivers.
  *
+ * Information and datasheet:
+ * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -26,7 +29,7 @@
  * Two bytes need to be written to read a single register,
  * while most other chips just require one and take the second
  * one as the data to be written. To prevent corrupting
- * unknown chips, the user must explicitely set the probe parameter.
+ * unknown chips, the user must explicitly set the probe parameter.
  */
 
 static unsigned short normal_i2c[] = { I2C_CLIENT_END };
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index 8b3b0f4a157c..ac7e8ef504cb 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -28,6 +28,7 @@ static struct proc_dir_entry *dasd_proc_root_entry = NULL;
 static struct proc_dir_entry *dasd_devices_entry = NULL;
 static struct proc_dir_entry *dasd_statistics_entry = NULL;
 
+#ifdef CONFIG_DASD_PROFILE
 static char *
 dasd_get_user_string(const char __user *user_buf, size_t user_len)
 {
@@ -47,6 +48,7 @@ dasd_get_user_string(const char __user *user_buf, size_t user_len)
 		buffer[user_len] = 0;
 	return buffer;
 }
+#endif /* CONFIG_DASD_PROFILE */
 
 static int
 dasd_devices_show(struct seq_file *m, void *v)
@@ -167,6 +169,7 @@ dasd_calc_metrics(char *page, char **start, off_t off,
 	return len;
 }
 
+#ifdef CONFIG_DASD_PROFILE
 static char *
 dasd_statistics_array(char *str, unsigned int *array, int shift)
 {
@@ -180,6 +183,7 @@ dasd_statistics_array(char *str, unsigned int *array, int shift)
 	str += sprintf(str,"\n");
 	return str;
 }
+#endif /* CONFIG_DASD_PROFILE */
 
 static int
 dasd_statistics_read(char *page, char **start, off_t off,
diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h
index dbb99d1b6f57..c7318a125852 100644
--- a/drivers/s390/char/sclp.h
+++ b/drivers/s390/char/sclp.h
@@ -72,6 +72,18 @@ typedef unsigned int sclp_cmdw_t;
 
 typedef u32 sccb_mask_t;	/* ATTENTION: assumes 32bit mask !!! */
 
+struct sccb_header {
+	u16	length;
+	u8	function_code;
+	u8	control_mask[3];
+	u16	response_code;
+} __attribute__((packed));
+
+extern u64 sclp_facilities;
+
+#define SCLP_HAS_CHP_INFO	(sclp_facilities & 0x8000000000000000ULL)
+#define SCLP_HAS_CHP_RECONFIG	(sclp_facilities & 0x2000000000000000ULL)
+
 struct gds_subvector {
 	u8	length;
 	u8	key;
diff --git a/drivers/s390/char/sclp_chp.c b/drivers/s390/char/sclp_chp.c
index a66b914519b5..c68f5e7e63a0 100644
--- a/drivers/s390/char/sclp_chp.c
+++ b/drivers/s390/char/sclp_chp.c
@@ -55,6 +55,8 @@ static int do_configure(sclp_cmdw_t cmd)
 	struct chp_cfg_data *data;
 	int rc;
 
+	if (!SCLP_HAS_CHP_RECONFIG)
+		return -EOPNOTSUPP;
 	/* Prepare sccb. */
 	data = (struct chp_cfg_data *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 	if (!data)
@@ -152,6 +154,8 @@ int sclp_chp_read_info(struct sclp_chp_info *info)
 	struct chp_info_data *data;
 	int rc;
 
+	if (!SCLP_HAS_CHP_INFO)
+		return -EOPNOTSUPP;
 	/* Prepare sccb. */
 	data = (struct chp_info_data *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 	if (!data)
diff --git a/drivers/s390/char/sclp_info.c b/drivers/s390/char/sclp_info.c
index 7bcbe643b087..a1136e052750 100644
--- a/drivers/s390/char/sclp_info.c
+++ b/drivers/s390/char/sclp_info.c
@@ -11,47 +11,106 @@
 #include <asm/sclp.h>
 #include "sclp.h"
 
-struct sclp_readinfo_sccb s390_readinfo_sccb;
+struct sclp_readinfo_sccb {
+	struct	sccb_header header;	/* 0-7 */
+	u16	rnmax;			/* 8-9 */
+	u8	rnsize;			/* 10 */
+	u8	_reserved0[24 - 11];	/* 11-23 */
+	u8	loadparm[8];		/* 24-31 */
+	u8	_reserved1[48 - 32];	/* 32-47 */
+	u64	facilities;		/* 48-55 */
+	u8	_reserved2[91 - 56];	/* 56-90 */
+	u8	flags;			/* 91 */
+	u8	_reserved3[100 - 92];	/* 92-99 */
+	u32	rnsize2;		/* 100-103 */
+	u64	rnmax2;			/* 104-111 */
+	u8	_reserved4[4096 - 112];	/* 112-4095 */
+} __attribute__((packed, aligned(4096)));
+
+static struct sclp_readinfo_sccb __initdata early_readinfo_sccb;
+static int __initdata early_readinfo_sccb_valid;
+
+u64 sclp_facilities;
 
 void __init sclp_readinfo_early(void)
 {
-	sclp_cmdw_t command;
-	struct sccb_header *sccb;
 	int ret;
+	int i;
+	struct sclp_readinfo_sccb *sccb;
+	sclp_cmdw_t commands[] = {SCLP_CMDW_READ_SCP_INFO_FORCED,
+				  SCLP_CMDW_READ_SCP_INFO};
 
-	__ctl_set_bit(0, 9); /* enable service signal subclass mask */
-
-	sccb = &s390_readinfo_sccb.header;
-	command = SCLP_CMDW_READ_SCP_INFO_FORCED;
-	while (1) {
-		u16 response;
-
-		memset(&s390_readinfo_sccb, 0, sizeof(s390_readinfo_sccb));
-		sccb->length = sizeof(s390_readinfo_sccb);
-		sccb->control_mask[2] = 0x80;
-
-		ret = sclp_service_call(command, &s390_readinfo_sccb);
-
-		if (ret == -EIO)
-			goto out;
-		if (ret == -EBUSY)
-			continue;
+	/* Enable service signal subclass mask. */
+	__ctl_set_bit(0, 9);
+	sccb = &early_readinfo_sccb;
+	for (i = 0; i < ARRAY_SIZE(commands); i++) {
+		do {
+			memset(sccb, 0, sizeof(*sccb));
+			sccb->header.length = sizeof(*sccb);
+			sccb->header.control_mask[2] = 0x80;
+			ret = sclp_service_call(commands[i], sccb);
+		} while (ret == -EBUSY);
 
+		if (ret)
+			break;
 		__load_psw_mask(PSW_BASE_BITS | PSW_MASK_EXT |
 				PSW_MASK_WAIT | PSW_DEFAULT_KEY);
 		local_irq_disable();
+		/*
+		 * Contents of the sccb might have changed
+		 * therefore a barrier is needed.
+		 */
 		barrier();
+		if (sccb->header.response_code == 0x10) {
+			early_readinfo_sccb_valid = 1;
+			break;
+		}
+		if (sccb->header.response_code != 0x1f0)
+			break;
+	}
+	/* Disable service signal subclass mask again. */
+	__ctl_clear_bit(0, 9);
+}
 
-		response = sccb->response_code;
+void __init sclp_facilities_detect(void)
+{
+	if (!early_readinfo_sccb_valid)
+		return;
+	sclp_facilities = early_readinfo_sccb.facilities;
+}
 
-		if (response == 0x10)
-			break;
+unsigned long long __init sclp_memory_detect(void)
+{
+	unsigned long long memsize;
+	struct sclp_readinfo_sccb *sccb;
 
-		if (response != 0x1f0 || command == SCLP_CMDW_READ_SCP_INFO)
-			break;
+	if (!early_readinfo_sccb_valid)
+		return 0;
+	sccb = &early_readinfo_sccb;
+	if (sccb->rnsize)
+		memsize = sccb->rnsize << 20;
+	else
+		memsize = sccb->rnsize2 << 20;
+	if (sccb->rnmax)
+		memsize *= sccb->rnmax;
+	else
+		memsize *= sccb->rnmax2;
+	return memsize;
+}
 
-		command = SCLP_CMDW_READ_SCP_INFO;
-	}
-out:
-	__ctl_clear_bit(0, 9); /* disable service signal subclass mask */
+/*
+ * This function will be called after sclp_memory_detect(), which gets called
+ * early from early.c code. Therefore the sccb should have valid contents.
+ */
+void __init sclp_get_ipl_info(struct sclp_ipl_info *info)
+{
+	struct sclp_readinfo_sccb *sccb;
+
+	if (!early_readinfo_sccb_valid)
+		return;
+	sccb = &early_readinfo_sccb;
+	info->is_valid = 1;
+	if (sccb->flags & 0x2)
+		info->has_dump = 1;
+	memcpy(&info->loadparm, &sccb->loadparm, LOADPARM_LEN);
 }
diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c
index fce3dac5cb3e..82e6a6b253eb 100644
--- a/drivers/s390/char/vmcp.c
+++ b/drivers/s390/char/vmcp.c
@@ -175,13 +175,12 @@ static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 static const struct file_operations vmcp_fops = {
 	.owner		= THIS_MODULE,
-	.open		= &vmcp_open,
-	.release	= &vmcp_release,
-	.read		= &vmcp_read,
-	.llseek		= &no_llseek,
-	.write		= &vmcp_write,
-	.unlocked_ioctl	= &vmcp_ioctl,
-	.compat_ioctl	= &vmcp_ioctl
+	.open		= vmcp_open,
+	.release	= vmcp_release,
+	.read		= vmcp_read,
+	.write		= vmcp_write,
+	.unlocked_ioctl	= vmcp_ioctl,
+	.compat_ioctl	= vmcp_ioctl
 };
 
 static struct miscdevice vmcp_dev = {
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index a5a00e9ae4d0..12f7a4ce82c1 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -835,7 +835,7 @@ static void vmlogrdr_cleanup(void)
 }
 
 
-static int vmlogrdr_init(void)
+static int __init vmlogrdr_init(void)
 {
 	int rc;
 	int i;
@@ -885,7 +885,7 @@ cleanup:
 }
 
 
-static void vmlogrdr_exit(void)
+static void __exit vmlogrdr_exit(void)
 {
 	vmlogrdr_cleanup();
 	printk (KERN_INFO "vmlogrdr: driver unloaded\n");
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index 4e711a985d59..3712ede16723 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -156,7 +156,7 @@ static int memcpy_real(void *dest, unsigned long src, size_t count)
 	return rc;
 }
 
-static int memcpy_real_user(__user void *dest, unsigned long src, size_t count)
+static int memcpy_real_user(void __user *dest, unsigned long src, size_t count)
 {
 	static char buf[4096];
 	int offs = 0, size;
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index ac289e6eadfe..b57d93d986c0 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -141,8 +141,9 @@ static int s390_vary_chpid(struct chp_id chpid, int on)
 /*
  * Channel measurement related functions
  */
-static ssize_t chp_measurement_chars_read(struct kobject *kobj, char *buf,
-					  loff_t off, size_t count)
+static ssize_t chp_measurement_chars_read(struct kobject *kobj,
+					  struct bin_attribute *bin_attr,
+					  char *buf, loff_t off, size_t count)
 {
 	struct channel_path *chp;
 	unsigned int size;
@@ -165,7 +166,6 @@ static struct bin_attribute chp_measurement_chars_attr = {
 	.attr = {
 		.name = "measurement_chars",
 		.mode = S_IRUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = sizeof(struct cmg_chars),
 	.read = chp_measurement_chars_read,
@@ -193,8 +193,9 @@ static void chp_measurement_copy_block(struct cmg_entry *buf,
 	} while (reference_buf.values[0] != buf->values[0]);
 }
 
-static ssize_t chp_measurement_read(struct kobject *kobj, char *buf,
-				    loff_t off, size_t count)
+static ssize_t chp_measurement_read(struct kobject *kobj,
+				    struct bin_attribute *bin_attr,
+				    char *buf, loff_t off, size_t count)
 {
 	struct channel_path *chp;
 	struct channel_subsystem *css;
@@ -217,7 +218,6 @@ static struct bin_attribute chp_measurement_attr = {
 	.attr = {
 		.name = "measurement",
 		.mode = S_IRUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = sizeof(struct cmg_entry),
 	.read = chp_measurement_read,
diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c
index 997f46874537..60b9347f7c92 100644
--- a/drivers/s390/cio/device_id.c
+++ b/drivers/s390/cio/device_id.c
@@ -27,7 +27,6 @@
 /*
  * diag210 is used under VM to get information about a virtual device
  */
-#ifdef CONFIG_64BIT
 int
 diag210(struct diag210 * addr)
 {
@@ -43,6 +42,7 @@ diag210(struct diag210 * addr)
 	spin_lock_irqsave(&diag210_lock, flags);
 	diag210_tmp = *addr;
 
+#ifdef CONFIG_64BIT
 	asm volatile(
 		"	lhi	%0,-1\n"
 		"	sam31\n"
@@ -51,19 +51,8 @@ diag210(struct diag210 * addr)
 		"	srl	%0,28\n"
 		"1:	sam64\n"
 		EX_TABLE(0b,1b)
-		: "=&d" (ccode) : "a" (__pa(&diag210_tmp)) : "cc", "memory");
-
-	*addr = diag210_tmp;
-	spin_unlock_irqrestore(&diag210_lock, flags);
-
-	return ccode;
-}
+		: "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
 #else
-int
-diag210(struct diag210 * addr)
-{
-	int ccode;
-
 	asm volatile(
 		"	lhi	%0,-1\n"
 		"	diag	%1,0,0x210\n"
@@ -71,11 +60,14 @@ diag210(struct diag210 * addr)
 		"	srl	%0,28\n"
 		"1:\n"
 		EX_TABLE(0b,1b)
-		: "=&d" (ccode) : "a" (__pa(addr)) : "cc", "memory");
+		: "=&d" (ccode) : "a" (&diag210_tmp) : "cc", "memory");
+#endif
+
+	*addr = diag210_tmp;
+	spin_unlock_irqrestore(&diag210_lock, flags);
 
 	return ccode;
 }
-#endif
 
 /*
  * Input :
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 5aac0ec36368..90bd22014513 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -43,6 +43,7 @@ static void ap_poll_all(unsigned long);
 static void ap_poll_timeout(unsigned long);
 static int ap_poll_thread_start(void);
 static void ap_poll_thread_stop(void);
+static void ap_request_timeout(unsigned long);
 
 /**
  * Module description.
@@ -189,6 +190,7 @@ int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
 	case AP_RESPONSE_NORMAL:
 		return 0;
 	case AP_RESPONSE_Q_FULL:
+	case AP_RESPONSE_RESET_IN_PROGRESS:
 		return -EBUSY;
 	default:	/* Device is gone. */
 		return -ENODEV;
@@ -252,6 +254,8 @@ int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
 		if (status.queue_empty)
 			return -ENOENT;
 		return -EBUSY;
+	case AP_RESPONSE_RESET_IN_PROGRESS:
+		return -EBUSY;
 	default:
 		return -ENODEV;
 	}
@@ -326,11 +330,12 @@ static int ap_init_queue(ap_qid_t qid)
 			i = AP_MAX_RESET;	/* return with -ENODEV */
 			break;
 		case AP_RESPONSE_RESET_IN_PROGRESS:
+			rc = -EBUSY;
 		case AP_RESPONSE_BUSY:
 		default:
 			break;
 		}
-		if (rc != -ENODEV)
+		if (rc != -ENODEV && rc != -EBUSY)
 			break;
 		if (i < AP_MAX_RESET - 1) {
 			udelay(5);
@@ -341,6 +346,40 @@ static int ap_init_queue(ap_qid_t qid)
 }
 
 /**
+ * Arm request timeout if a AP device was idle and a new request is submitted.
+ */
+static void ap_increase_queue_count(struct ap_device *ap_dev)
+{
+	int timeout = ap_dev->drv->request_timeout;
+
+	ap_dev->queue_count++;
+	if (ap_dev->queue_count == 1) {
+		mod_timer(&ap_dev->timeout, jiffies + timeout);
+		ap_dev->reset = AP_RESET_ARMED;
+	}
+}
+
+/**
+ * AP device is still alive, re-schedule request timeout if there are still
+ * pending requests.
+ */
+static void ap_decrease_queue_count(struct ap_device *ap_dev)
+{
+	int timeout = ap_dev->drv->request_timeout;
+
+	ap_dev->queue_count--;
+	if (ap_dev->queue_count > 0)
+		mod_timer(&ap_dev->timeout, jiffies + timeout);
+	else
+		/**
+		 * The timeout timer should to be disabled now - since
+		 * del_timer_sync() is very expensive, we just tell via the
+		 * reset flag to ignore the pending timeout timer.
+		 */
+		ap_dev->reset = AP_RESET_IGNORE;
+}
+
+/**
  * AP device related attributes.
  */
 static ssize_t ap_hwtype_show(struct device *dev,
@@ -498,6 +537,7 @@ static int ap_device_remove(struct device *dev)
 	struct ap_driver *ap_drv = ap_dev->drv;
 
 	ap_flush_queue(ap_dev);
+	del_timer_sync(&ap_dev->timeout);
 	if (ap_drv->remove)
 		ap_drv->remove(ap_dev);
 	spin_lock_bh(&ap_device_lock);
@@ -759,17 +799,21 @@ static void ap_scan_bus(struct work_struct *unused)
 				      __ap_scan_bus);
 		rc = ap_query_queue(qid, &queue_depth, &device_type);
 		if (dev) {
+			if (rc == -EBUSY) {
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				schedule_timeout(AP_RESET_TIMEOUT);
+				rc = ap_query_queue(qid, &queue_depth,
+						    &device_type);
+			}
 			ap_dev = to_ap_dev(dev);
 			spin_lock_bh(&ap_dev->lock);
 			if (rc || ap_dev->unregistered) {
 				spin_unlock_bh(&ap_dev->lock);
-				put_device(dev);
 				device_unregister(dev);
+				put_device(dev);
 				continue;
-			} else
-				spin_unlock_bh(&ap_dev->lock);
-		}
-		if (dev) {
+			}
+			spin_unlock_bh(&ap_dev->lock);
 			put_device(dev);
 			continue;
 		}
@@ -788,6 +832,8 @@ static void ap_scan_bus(struct work_struct *unused)
 		INIT_LIST_HEAD(&ap_dev->pendingq);
 		INIT_LIST_HEAD(&ap_dev->requestq);
 		INIT_LIST_HEAD(&ap_dev->list);
+		setup_timer(&ap_dev->timeout, ap_request_timeout,
+			    (unsigned long) ap_dev);
 		if (device_type == 0)
 			ap_probe_device_type(ap_dev);
 		else
@@ -853,7 +899,7 @@ static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
 	switch (status.response_code) {
 	case AP_RESPONSE_NORMAL:
 		atomic_dec(&ap_poll_requests);
-		ap_dev->queue_count--;
+		ap_decrease_queue_count(ap_dev);
 		list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
 			if (ap_msg->psmid != ap_dev->reply->psmid)
 				continue;
@@ -904,7 +950,7 @@ static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
 	switch (status.response_code) {
 	case AP_RESPONSE_NORMAL:
 		atomic_inc(&ap_poll_requests);
-		ap_dev->queue_count++;
+		ap_increase_queue_count(ap_dev);
 		list_move_tail(&ap_msg->list, &ap_dev->pendingq);
 		ap_dev->requestq_count--;
 		ap_dev->pendingq_count++;
@@ -914,6 +960,7 @@ static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
 		*flags |= 2;
 		break;
 	case AP_RESPONSE_Q_FULL:
+	case AP_RESPONSE_RESET_IN_PROGRESS:
 		*flags |= 2;
 		break;
 	case AP_RESPONSE_MESSAGE_TOO_BIG:
@@ -960,10 +1007,11 @@ static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_ms
 			list_add_tail(&ap_msg->list, &ap_dev->pendingq);
 			atomic_inc(&ap_poll_requests);
 			ap_dev->pendingq_count++;
-			ap_dev->queue_count++;
+			ap_increase_queue_count(ap_dev);
 			ap_dev->total_request_count++;
 			break;
 		case AP_RESPONSE_Q_FULL:
+		case AP_RESPONSE_RESET_IN_PROGRESS:
 			list_add_tail(&ap_msg->list, &ap_dev->requestq);
 			ap_dev->requestq_count++;
 			ap_dev->total_request_count++;
@@ -1046,6 +1094,25 @@ static void ap_poll_timeout(unsigned long unused)
 }
 
 /**
+ * Reset a not responding AP device and move all requests from the
+ * pending queue to the request queue.
+ */
+static void ap_reset(struct ap_device *ap_dev)
+{
+	int rc;
+
+	ap_dev->reset = AP_RESET_IGNORE;
+	atomic_sub(ap_dev->queue_count, &ap_poll_requests);
+	ap_dev->queue_count = 0;
+	list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
+	ap_dev->requestq_count += ap_dev->pendingq_count;
+	ap_dev->pendingq_count = 0;
+	rc = ap_init_queue(ap_dev->qid);
+	if (rc == -ENODEV)
+		ap_dev->unregistered = 1;
+}
+
+/**
  * Poll all AP devices on the bus in a round robin fashion. Continue
  * polling until bit 2^0 of the control flags is not set. If bit 2^1
  * of the control flags has been set arm the poll timer.
@@ -1056,6 +1123,8 @@ static int __ap_poll_all(struct ap_device *ap_dev, unsigned long *flags)
 	if (!ap_dev->unregistered) {
 		if (ap_poll_queue(ap_dev, flags))
 			ap_dev->unregistered = 1;
+		if (ap_dev->reset == AP_RESET_DO)
+			ap_reset(ap_dev);
 	}
 	spin_unlock(&ap_dev->lock);
 	return 0;
@@ -1147,6 +1216,17 @@ static void ap_poll_thread_stop(void)
 	mutex_unlock(&ap_poll_thread_mutex);
 }
 
+/**
+ * Handling of request timeouts
+ */
+static void ap_request_timeout(unsigned long data)
+{
+	struct ap_device *ap_dev = (struct ap_device *) data;
+
+	if (ap_dev->reset == AP_RESET_ARMED)
+		ap_dev->reset = AP_RESET_DO;
+}
+
 static void ap_reset_domain(void)
 {
 	int i;
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 008559ea742b..87c2d6442875 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -33,6 +33,7 @@
 #define AP_DEVICES 64		/* Number of AP devices. */
 #define AP_DOMAINS 16		/* Number of AP domains. */
 #define AP_MAX_RESET 90		/* Maximum number of resets. */
+#define AP_RESET_TIMEOUT (HZ/2)	/* Time in ticks for reset timeouts. */
 #define AP_CONFIG_TIME 30	/* Time in seconds between AP bus rescans. */
 #define AP_POLL_TIME 1		/* Time in ticks between receive polls. */
 
@@ -83,6 +84,13 @@ struct ap_queue_status {
 #define AP_DEVICE_TYPE_CEX2A	6
 #define AP_DEVICE_TYPE_CEX2C	7
 
+/**
+ * AP reset flag states
+ */
+#define AP_RESET_IGNORE	0	/* request timeout will be ignored */
+#define AP_RESET_ARMED	1	/* request timeout timer is active */
+#define AP_RESET_DO	2	/* AP reset required */
+
 struct ap_device;
 struct ap_message;
 
@@ -95,6 +103,7 @@ struct ap_driver {
 	/* receive is called from tasklet context */
 	void (*receive)(struct ap_device *, struct ap_message *,
 			struct ap_message *);
+	int request_timeout;		/* request timeout in jiffies */
 };
 
 #define to_ap_drv(x) container_of((x), struct ap_driver, driver)
@@ -112,6 +121,8 @@ struct ap_device {
 	int queue_depth;		/* AP queue depth.*/
 	int device_type;		/* AP device type. */
 	int unregistered;		/* marks AP device as unregistered */
+	struct timer_list timeout;	/* Timer for request timeouts. */
+	int reset;			/* Reset required after req. timeout. */
 
 	int queue_count;		/* # messages currently on AP queue. */
 
diff --git a/drivers/s390/crypto/zcrypt_cex2a.c b/drivers/s390/crypto/zcrypt_cex2a.c
index 5bb13a9d0898..08657f604b8c 100644
--- a/drivers/s390/crypto/zcrypt_cex2a.c
+++ b/drivers/s390/crypto/zcrypt_cex2a.c
@@ -70,6 +70,7 @@ static struct ap_driver zcrypt_cex2a_driver = {
 	.remove = zcrypt_cex2a_remove,
 	.receive = zcrypt_cex2a_receive,
 	.ids = zcrypt_cex2a_ids,
+	.request_timeout = CEX2A_CLEANUP_TIME,
 };
 
 /**
@@ -306,18 +307,13 @@ static long zcrypt_cex2a_modexpo(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&work, CEX2A_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&work);
+	if (rc == 0)
 		rc = convert_response(zdev, &ap_msg, mex->outputdata,
 				      mex->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	kfree(ap_msg.message);
 	return rc;
@@ -348,18 +344,13 @@ static long zcrypt_cex2a_modexpo_crt(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&work, CEX2A_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&work);
+	if (rc == 0)
 		rc = convert_response(zdev, &ap_msg, crt->outputdata,
 				      crt->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	kfree(ap_msg.message);
 	return rc;
diff --git a/drivers/s390/crypto/zcrypt_pcica.c b/drivers/s390/crypto/zcrypt_pcica.c
index 818ffe05ac00..6e93b4751782 100644
--- a/drivers/s390/crypto/zcrypt_pcica.c
+++ b/drivers/s390/crypto/zcrypt_pcica.c
@@ -70,6 +70,7 @@ static struct ap_driver zcrypt_pcica_driver = {
 	.remove = zcrypt_pcica_remove,
 	.receive = zcrypt_pcica_receive,
 	.ids = zcrypt_pcica_ids,
+	.request_timeout = PCICA_CLEANUP_TIME,
 };
 
 /**
@@ -290,18 +291,13 @@ static long zcrypt_pcica_modexpo(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&work, PCICA_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&work);
+	if (rc == 0)
 		rc = convert_response(zdev, &ap_msg, mex->outputdata,
 				      mex->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	kfree(ap_msg.message);
 	return rc;
@@ -332,18 +328,13 @@ static long zcrypt_pcica_modexpo_crt(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&work, PCICA_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&work);
+	if (rc == 0)
 		rc = convert_response(zdev, &ap_msg, crt->outputdata,
 				      crt->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	kfree(ap_msg.message);
 	return rc;
diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c
index f295a403b29a..d6d59bf9ac38 100644
--- a/drivers/s390/crypto/zcrypt_pcicc.c
+++ b/drivers/s390/crypto/zcrypt_pcicc.c
@@ -82,6 +82,7 @@ static struct ap_driver zcrypt_pcicc_driver = {
 	.remove = zcrypt_pcicc_remove,
 	.receive = zcrypt_pcicc_receive,
 	.ids = zcrypt_pcicc_ids,
+	.request_timeout = PCICC_CLEANUP_TIME,
 };
 
 /**
@@ -501,18 +502,13 @@ static long zcrypt_pcicc_modexpo(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&work, PCICC_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&work);
+	if (rc == 0)
 		rc = convert_response(zdev, &ap_msg, mex->outputdata,
 				      mex->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	free_page((unsigned long) ap_msg.message);
 	return rc;
@@ -544,18 +540,13 @@ static long zcrypt_pcicc_modexpo_crt(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&work, PCICC_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&work);
+	if (rc == 0)
 		rc = convert_response(zdev, &ap_msg, crt->outputdata,
 				      crt->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	free_page((unsigned long) ap_msg.message);
 	return rc;
diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c
index 252443b6bd1b..64948788d301 100644
--- a/drivers/s390/crypto/zcrypt_pcixcc.c
+++ b/drivers/s390/crypto/zcrypt_pcixcc.c
@@ -93,6 +93,7 @@ static struct ap_driver zcrypt_pcixcc_driver = {
 	.remove = zcrypt_pcixcc_remove,
 	.receive = zcrypt_pcixcc_receive,
 	.ids = zcrypt_pcixcc_ids,
+	.request_timeout = PCIXCC_CLEANUP_TIME,
 };
 
 /**
@@ -641,18 +642,13 @@ static long zcrypt_pcixcc_modexpo(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&resp_type.work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&resp_type.work, PCIXCC_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&resp_type.work);
+	if (rc == 0)
 		rc = convert_response_ica(zdev, &ap_msg, mex->outputdata,
 					  mex->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	free_page((unsigned long) ap_msg.message);
 	return rc;
@@ -685,18 +681,13 @@ static long zcrypt_pcixcc_modexpo_crt(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&resp_type.work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&resp_type.work, PCIXCC_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&resp_type.work);
+	if (rc == 0)
 		rc = convert_response_ica(zdev, &ap_msg, crt->outputdata,
 					  crt->outputdatalength);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	free_page((unsigned long) ap_msg.message);
 	return rc;
@@ -729,17 +720,12 @@ static long zcrypt_pcixcc_send_cprb(struct zcrypt_device *zdev,
 		goto out_free;
 	init_completion(&resp_type.work);
 	ap_queue_message(zdev->ap_dev, &ap_msg);
-	rc = wait_for_completion_interruptible_timeout(
-				&resp_type.work, PCIXCC_CLEANUP_TIME);
-	if (rc > 0)
+	rc = wait_for_completion_interruptible(&resp_type.work);
+	if (rc == 0)
 		rc = convert_response_xcrb(zdev, &ap_msg, xcRB);
-	else {
-		/* Signal pending or message timed out. */
+	else
+		/* Signal pending. */
 		ap_cancel_message(zdev->ap_dev, &ap_msg);
-		if (rc == 0)
-			/* Message timed out. */
-			rc = -ETIME;
-	}
 out_free:
 	memset(ap_msg.message, 0x0, ap_msg.length);
 	kfree(ap_msg.message);
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index 65ffc21afc37..bb0287ad1aac 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -991,7 +991,7 @@ static struct attribute_group qeth_osn_device_attr_group = {
 
 #define QETH_DEVICE_ATTR(_id,_name,_mode,_show,_store)			     \
 struct device_attribute dev_attr_##_id = {				     \
-	.attr = {.name=__stringify(_name), .mode=_mode, .owner=THIS_MODULE },\
+	.attr = {.name=__stringify(_name), .mode=_mode, },\
 	.show	= _show,						     \
 	.store	= _store,						     \
 };
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 27852b43b904..1c0d7578e791 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -223,13 +223,8 @@ static int __devinit asd_common_setup(struct asd_ha_struct *asd_ha)
 {
 	int err, i;
 
-	err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID,
-				   &asd_ha->revision_id);
-	if (err) {
-		asd_printk("couldn't read REVISION ID register of %s\n",
-			   pci_name(asd_ha->pcidev));
-		goto Err;
-	}
+	asd_ha->revision_id = asd_ha->pcidev->revision;
+
 	err = -ENODEV;
 	if (asd_ha->revision_id < AIC9410_DEV_REV_B0) {
 		asd_printk("%s is revision %s (%X), which is not supported\n",
diff --git a/drivers/scsi/arcmsr/arcmsr_attr.c b/drivers/scsi/arcmsr/arcmsr_attr.c
index 03bfed61bffc..06c0dce3b839 100644
--- a/drivers/scsi/arcmsr/arcmsr_attr.c
+++ b/drivers/scsi/arcmsr/arcmsr_attr.c
@@ -59,8 +59,9 @@
 struct class_device_attribute *arcmsr_host_attrs[];
 
 static ssize_t
-arcmsr_sysfs_iop_message_read(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+arcmsr_sysfs_iop_message_read(struct kobject *kobj,
+			      struct bin_attribute *bin_attr,
+			      char *buf, loff_t off, size_t count)
 {
 	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
 	struct Scsi_Host *host = class_to_shost(cdev);
@@ -105,8 +106,9 @@ arcmsr_sysfs_iop_message_read(struct kobject *kobj, char *buf, loff_t off,
 }
 
 static ssize_t
-arcmsr_sysfs_iop_message_write(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+arcmsr_sysfs_iop_message_write(struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
 {
 	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
 	struct Scsi_Host *host = class_to_shost(cdev);
@@ -152,8 +154,9 @@ arcmsr_sysfs_iop_message_write(struct kobject *kobj, char *buf, loff_t off,
 }
 
 static ssize_t
-arcmsr_sysfs_iop_message_clear(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+arcmsr_sysfs_iop_message_clear(struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
 {
 	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
 	struct Scsi_Host *host = class_to_shost(cdev);
@@ -188,7 +191,6 @@ static struct bin_attribute arcmsr_sysfs_message_read_attr = {
 	.attr = {
 		.name = "mu_read",
 		.mode = S_IRUSR ,
-		.owner = THIS_MODULE,
 	},
 	.size = 1032,
 	.read = arcmsr_sysfs_iop_message_read,
@@ -198,7 +200,6 @@ static struct bin_attribute arcmsr_sysfs_message_write_attr = {
 	.attr = {
 		.name = "mu_write",
 		.mode = S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 1032,
 	.write = arcmsr_sysfs_iop_message_write,
@@ -208,7 +209,6 @@ static struct bin_attribute arcmsr_sysfs_message_clear_attr = {
 	.attr = {
 		.name = "mu_clear",
 		.mode = S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 1,
 	.write = arcmsr_sysfs_iop_message_clear,
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index fa6ff295e568..b3bf77f1ec05 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -2465,6 +2465,7 @@ restart:
 /**
  * ipr_read_trace - Dump the adapter trace
  * @kobj:		kobject struct
+ * @bin_attr:		bin_attribute struct
  * @buf:		buffer
  * @off:		offset
  * @count:		buffer size
@@ -2472,8 +2473,9 @@ restart:
  * Return value:
  *	number of bytes printed to buffer
  **/
-static ssize_t ipr_read_trace(struct kobject *kobj, char *buf,
-			      loff_t off, size_t count)
+static ssize_t ipr_read_trace(struct kobject *kobj,
+			      struct bin_attribute *bin_attr,
+			      char *buf, loff_t off, size_t count)
 {
 	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
 	struct Scsi_Host *shost = class_to_shost(cdev);
@@ -3166,6 +3168,7 @@ static struct class_device_attribute *ipr_ioa_attrs[] = {
 /**
  * ipr_read_dump - Dump the adapter
  * @kobj:		kobject struct
+ * @bin_attr:		bin_attribute struct
  * @buf:		buffer
  * @off:		offset
  * @count:		buffer size
@@ -3173,8 +3176,9 @@ static struct class_device_attribute *ipr_ioa_attrs[] = {
  * Return value:
  *	number of bytes printed to buffer
  **/
-static ssize_t ipr_read_dump(struct kobject *kobj, char *buf,
-			      loff_t off, size_t count)
+static ssize_t ipr_read_dump(struct kobject *kobj,
+			     struct bin_attribute *bin_attr,
+			     char *buf, loff_t off, size_t count)
 {
 	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
 	struct Scsi_Host *shost = class_to_shost(cdev);
@@ -3327,6 +3331,7 @@ static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg)
 /**
  * ipr_write_dump - Setup dump state of adapter
  * @kobj:		kobject struct
+ * @bin_attr:		bin_attribute struct
  * @buf:		buffer
  * @off:		offset
  * @count:		buffer size
@@ -3334,8 +3339,9 @@ static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg)
  * Return value:
  *	number of bytes printed to buffer
  **/
-static ssize_t ipr_write_dump(struct kobject *kobj, char *buf,
-			      loff_t off, size_t count)
+static ssize_t ipr_write_dump(struct kobject *kobj,
+			      struct bin_attribute *bin_attr,
+			      char *buf, loff_t off, size_t count)
 {
 	struct class_device *cdev = container_of(kobj,struct class_device,kobj);
 	struct Scsi_Host *shost = class_to_shost(cdev);
@@ -5367,18 +5373,12 @@ static const u16 ipr_blocked_processors[] = {
  **/
 static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
 {
-	u8 rev_id;
 	int i;
 
-	if (ioa_cfg->type == 0x5702) {
-		if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID,
-					 &rev_id) == PCIBIOS_SUCCESSFUL) {
-			if (rev_id < 4) {
-				for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
-					if (__is_processor(ipr_blocked_processors[i]))
-						return 1;
-				}
-			}
+	if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) {
+		for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
+			if (__is_processor(ipr_blocked_processors[i]))
+				return 1;
 		}
 	}
 	return 0;
@@ -7535,13 +7535,7 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 	else
 		ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
 
-	rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &ioa_cfg->revid);
-
-	if (rc != PCIBIOS_SUCCESSFUL) {
-		dev_err(&pdev->dev, "Failed to read PCI revision ID\n");
-		rc = -EIO;
-		goto out_scsi_host_put;
-	}
+	ioa_cfg->revid = pdev->revision;
 
 	ipr_regs_pci = pci_resource_start(pdev, 0);
 
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 8b704f73055a..40f148e0833f 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -7148,7 +7148,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
 	uint32_t mem_addr;
 	uint32_t io_len;
 	uint32_t mem_len;
-	uint8_t revision_id;
 	uint8_t bus;
 	uint8_t func;
 	uint8_t irq;
@@ -7227,12 +7226,6 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
 		}
 	}
 
-	/* get the revision ID */
-	if (pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id)) {
-		IPS_PRINTK(KERN_WARNING, pci_dev, "Can't get revision id.\n");
-		return -1;
-	}
-
 	subdevice_id = pci_dev->subsystem_device;
 
 	/* found a controller */
@@ -7258,7 +7251,7 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
 	ha->mem_ptr = mem_ptr;
 	ha->ioremap_ptr = ioremap_ptr;
 	ha->host_num = (uint32_t) index;
-	ha->revision_id = revision_id;
+	ha->revision_id = pci_dev->revision;
 	ha->slot_num = PCI_SLOT(pci_dev->devfn);
 	ha->device_id = pci_dev->device;
 	ha->subdevice_id = subdevice_id;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index e34442e405e8..23e90c5f8f35 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -38,8 +38,10 @@ static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr);
 
 #if 0
 /* FIXME: smp needs to migrate into the sas class */
-static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t);
-static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t);
+static ssize_t smp_portal_read(struct kobject *, struct bin_attribute *,
+			       char *, loff_t, size_t);
+static ssize_t smp_portal_write(struct kobject *, struct bin_attribute *,
+				char *, loff_t, size_t);
 #endif
 
 /* ---------- SMP task management ---------- */
@@ -1368,7 +1370,6 @@ static void sas_ex_smp_hook(struct domain_device *dev)
 	memset(bin_attr, 0, sizeof(*bin_attr));
 
 	bin_attr->attr.name = SMP_BIN_ATTR_NAME;
-	bin_attr->attr.owner = THIS_MODULE;
 	bin_attr->attr.mode = 0600;
 
 	bin_attr->size = 0;
@@ -1846,8 +1847,9 @@ out:
 #if 0
 /* ---------- SMP portal ---------- */
 
-static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
-				size_t size)
+static ssize_t smp_portal_write(struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t offs, size_t size)
 {
 	struct domain_device *dev = to_dom_device(kobj);
 	struct expander_device *ex = &dev->ex_dev;
@@ -1873,8 +1875,9 @@ static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
 	return size;
 }
 
-static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs,
-			       size_t size)
+static ssize_t smp_portal_read(struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t offs, size_t size)
 {
 	struct domain_device *dev = to_dom_device(kobj);
 	struct expander_device *ex = &dev->ex_dev;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 95fe77e816f8..5dfda9778c80 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1133,7 +1133,8 @@ struct class_device_attribute *lpfc_host_attrs[] = {
 };
 
 static ssize_t
-sysfs_ctlreg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+		   char *buf, loff_t off, size_t count)
 {
 	size_t buf_off;
 	struct Scsi_Host *host = class_to_shost(container_of(kobj,
@@ -1165,7 +1166,8 @@ sysfs_ctlreg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
 }
 
 static ssize_t
-sysfs_ctlreg_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_ctlreg_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+		  char *buf, loff_t off, size_t count)
 {
 	size_t buf_off;
 	uint32_t * tmp_ptr;
@@ -1200,7 +1202,6 @@ static struct bin_attribute sysfs_ctlreg_attr = {
 	.attr = {
 		.name = "ctlreg",
 		.mode = S_IRUSR | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 256,
 	.read = sysfs_ctlreg_read,
@@ -1222,7 +1223,8 @@ sysfs_mbox_idle (struct lpfc_hba * phba)
 }
 
 static ssize_t
-sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+		 char *buf, loff_t off, size_t count)
 {
 	struct Scsi_Host * host =
 		class_to_shost(container_of(kobj, struct class_device, kobj));
@@ -1274,7 +1276,8 @@ sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
 }
 
 static ssize_t
-sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+		char *buf, loff_t off, size_t count)
 {
 	struct Scsi_Host *host =
 		class_to_shost(container_of(kobj, struct class_device,
@@ -1422,7 +1425,6 @@ static struct bin_attribute sysfs_mbox_attr = {
 	.attr = {
 		.name = "mbox",
 		.mode = S_IRUSR | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = MAILBOX_CMD_SIZE,
 	.read = sysfs_mbox_read,
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index dcb4ba0ecee1..955b2e48d041 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1578,10 +1578,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 	INIT_LIST_HEAD(&phba->fc_nodes);
 
 	pci_set_master(pdev);
-	retval = pci_set_mwi(pdev);
-	if (retval)
-		dev_printk(KERN_WARNING, &pdev->dev,
-			   "Warning: pci_set_mwi returned %d\n", retval);
+	pci_try_set_mwi(pdev);
 
 	if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
 		if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0)
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index f6f561d26bf0..3e9765f0281d 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -3487,15 +3487,6 @@ static int nsp32_resume(struct pci_dev *pdev)
 	return 0;
 }
 
-/* Enable wake event */
-static int nsp32_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
-	struct Scsi_Host *host = pci_get_drvdata(pdev);
-
-	nsp32_msg(KERN_INFO, "pci-enable_wake: stub, pdev=0x%p, enable=%d, slot=%s, host=0x%p", pdev, enable, pci_name(pdev), host);
-
-	return 0;
-}
 #endif
 
 /************************************************************************
@@ -3571,7 +3562,6 @@ static struct pci_driver nsp32_driver = {
 #ifdef CONFIG_PM
 	.suspend	= nsp32_suspend, 
 	.resume		= nsp32_resume, 
-	.enable_wake    = nsp32_enable_wake,
 #endif
 };
 
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 8081b637d97e..942db9de785e 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -11,8 +11,9 @@
 /* SYSFS attributes --------------------------------------------------------- */
 
 static ssize_t
-qla2x00_sysfs_read_fw_dump(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_read_fw_dump(struct kobject *kobj,
+			   struct bin_attribute *bin_attr,
+			   char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -31,8 +32,9 @@ qla2x00_sysfs_read_fw_dump(struct kobject *kobj, char *buf, loff_t off,
 }
 
 static ssize_t
-qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_write_fw_dump(struct kobject *kobj,
+			    struct bin_attribute *bin_attr,
+			    char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -73,7 +75,6 @@ static struct bin_attribute sysfs_fw_dump_attr = {
 	.attr = {
 		.name = "fw_dump",
 		.mode = S_IRUSR | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 0,
 	.read = qla2x00_sysfs_read_fw_dump,
@@ -81,8 +82,9 @@ static struct bin_attribute sysfs_fw_dump_attr = {
 };
 
 static ssize_t
-qla2x00_sysfs_read_nvram(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_read_nvram(struct kobject *kobj,
+			 struct bin_attribute *bin_attr,
+			 char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -101,8 +103,9 @@ qla2x00_sysfs_read_nvram(struct kobject *kobj, char *buf, loff_t off,
 }
 
 static ssize_t
-qla2x00_sysfs_write_nvram(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_write_nvram(struct kobject *kobj,
+			  struct bin_attribute *bin_attr,
+			  char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -149,7 +152,6 @@ static struct bin_attribute sysfs_nvram_attr = {
 	.attr = {
 		.name = "nvram",
 		.mode = S_IRUSR | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 512,
 	.read = qla2x00_sysfs_read_nvram,
@@ -157,8 +159,9 @@ static struct bin_attribute sysfs_nvram_attr = {
 };
 
 static ssize_t
-qla2x00_sysfs_read_optrom(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_read_optrom(struct kobject *kobj,
+			  struct bin_attribute *bin_attr,
+			  char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -176,8 +179,9 @@ qla2x00_sysfs_read_optrom(struct kobject *kobj, char *buf, loff_t off,
 }
 
 static ssize_t
-qla2x00_sysfs_write_optrom(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_write_optrom(struct kobject *kobj,
+			   struct bin_attribute *bin_attr,
+			   char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -198,7 +202,6 @@ static struct bin_attribute sysfs_optrom_attr = {
 	.attr = {
 		.name = "optrom",
 		.mode = S_IRUSR | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = OPTROM_SIZE_24XX,
 	.read = qla2x00_sysfs_read_optrom,
@@ -206,8 +209,9 @@ static struct bin_attribute sysfs_optrom_attr = {
 };
 
 static ssize_t
-qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -279,15 +283,15 @@ static struct bin_attribute sysfs_optrom_ctl_attr = {
 	.attr = {
 		.name = "optrom_ctl",
 		.mode = S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 0,
 	.write = qla2x00_sysfs_write_optrom_ctl,
 };
 
 static ssize_t
-qla2x00_sysfs_read_vpd(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_read_vpd(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -305,8 +309,9 @@ qla2x00_sysfs_read_vpd(struct kobject *kobj, char *buf, loff_t off,
 }
 
 static ssize_t
-qla2x00_sysfs_write_vpd(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_write_vpd(struct kobject *kobj,
+			struct bin_attribute *bin_attr,
+			char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -327,7 +332,6 @@ static struct bin_attribute sysfs_vpd_attr = {
 	.attr = {
 		.name = "vpd",
 		.mode = S_IRUSR | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = 0,
 	.read = qla2x00_sysfs_read_vpd,
@@ -335,8 +339,9 @@ static struct bin_attribute sysfs_vpd_attr = {
 };
 
 static ssize_t
-qla2x00_sysfs_read_sfp(struct kobject *kobj, char *buf, loff_t off,
-    size_t count)
+qla2x00_sysfs_read_sfp(struct kobject *kobj,
+		       struct bin_attribute *bin_attr,
+		       char *buf, loff_t off, size_t count)
 {
 	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
 	    struct device, kobj)));
@@ -375,7 +380,6 @@ static struct bin_attribute sysfs_sfp_attr = {
 	.attr = {
 		.name = "sfp",
 		.mode = S_IRUSR | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = SFP_DEV_SIZE * 2,
 	.read = qla2x00_sysfs_read_sfp,
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2a45aec4ff29..cf94f8636ba5 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -296,7 +296,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha)
 	d &= ~PCI_ROM_ADDRESS_ENABLE;
 	pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
 
-	pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->chip_revision);
+	ha->chip_revision = ha->pdev->revision;
 
 	/* Get PCI bus information. */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 315ea9916456..2adbed4e10f3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -556,7 +556,7 @@ choice
 
 config SERIAL_BFIN_DMA
 	bool "DMA mode"
-	depends on DMA_UNCACHED_1M
+	depends on DMA_UNCACHED_1M && !KGDB_UART
 	help
 	  This driver works under DMA mode. If this option is selected, the
 	  blackfin simple dma driver is also enabled.
@@ -599,7 +599,7 @@ config UART0_RTS_PIN
 
 config SERIAL_BFIN_UART1
 	bool "Enable UART1"
-	depends on SERIAL_BFIN && (BF534 || BF536 || BF537)
+	depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
 	help
 	  Enable UART1
 
@@ -612,18 +612,58 @@ config BFIN_UART1_CTSRTS
 
 config UART1_CTS_PIN
 	int "UART1 CTS pin"
-	depends on BFIN_UART1_CTSRTS
+	depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
 	default -1
 	help
 	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
 
 config UART1_RTS_PIN
 	int "UART1 RTS pin"
-	depends on BFIN_UART1_CTSRTS
+	depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
 	default -1
 	help
 	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
 
+config SERIAL_BFIN_UART2
+	bool "Enable UART2"
+	depends on SERIAL_BFIN && (BF54x)
+	help
+	  Enable UART2
+
+config BFIN_UART2_CTSRTS
+	bool "Enable UART2 hardware flow control"
+	depends on SERIAL_BFIN_UART2
+	help
+	  Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+	  signal.
+
+config UART2_CTS_PIN
+	int "UART2 CTS pin"
+	depends on BFIN_UART2_CTSRTS
+	default -1
+	help
+	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART2_RTS_PIN
+	int "UART2 RTS pin"
+	depends on BFIN_UART2_CTSRTS
+	default -1
+	help
+	  Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config SERIAL_BFIN_UART3
+	bool "Enable UART3"
+	depends on SERIAL_BFIN && (BF54x)
+	help
+	  Enable UART3
+
+config BFIN_UART3_CTSRTS
+	bool "Enable UART3 hardware flow control"
+	depends on SERIAL_BFIN_UART3
+	help
+	  Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+	  signal.
+
 config SERIAL_IMX
 	bool "IMX serial port support"
 	depends on ARM && ARCH_IMX
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 22569bd5d821..66c92bc36f3d 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -41,6 +41,11 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 
+#ifdef CONFIG_KGDB_UART
+#include <linux/kgdb.h>
+#include <asm/irq_regs.h>
+#endif
+
 #include <asm/gpio.h>
 #include <asm/mach/bfin_serial_5xx.h>
 
@@ -81,15 +86,29 @@ static void bfin_serial_stop_tx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
 
+#ifdef CONFIG_BF54x
+	while (!(UART_GET_LSR(uart) & TEMT))
+		continue;
+#endif
+
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	disable_dma(uart->tx_dma_channel);
 #else
+#ifdef CONFIG_BF54x
+	/* Waiting for Transmission Finished */
+	while (!(UART_GET_LSR(uart) & TFI))
+		continue;
+	/* Clear TFI bit */
+	UART_PUT_LSR(uart, TFI);
+	UART_CLEAR_IER(uart, ETBEI);
+#else
 	unsigned short ier;
 
 	ier = UART_GET_IER(uart);
 	ier &= ~ETBEI;
 	UART_PUT_IER(uart, ier);
 #endif
+#endif
 }
 
 /*
@@ -102,12 +121,16 @@ static void bfin_serial_start_tx(struct uart_port *port)
 #ifdef CONFIG_SERIAL_BFIN_DMA
 	bfin_serial_dma_tx_chars(uart);
 #else
+#ifdef CONFIG_BF54x
+	UART_SET_IER(uart, ETBEI);
+#else
 	unsigned short ier;
 	ier = UART_GET_IER(uart);
 	ier |= ETBEI;
 	UART_PUT_IER(uart, ier);
 	bfin_serial_tx_chars(uart);
 #endif
+#endif
 }
 
 /*
@@ -116,11 +139,18 @@ static void bfin_serial_start_tx(struct uart_port *port)
 static void bfin_serial_stop_rx(struct uart_port *port)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_BF54x
+	UART_CLEAR_IER(uart, ERBFI);
+#else
 	unsigned short ier;
 
 	ier = UART_GET_IER(uart);
+#ifdef	CONFIG_KGDB_UART
+	if (uart->port.line != CONFIG_KGDB_UART_PORT)
+#endif
 	ier &= ~ERBFI;
 	UART_PUT_IER(uart, ier);
+#endif
 }
 
 /*
@@ -130,6 +160,49 @@ static void bfin_serial_enable_ms(struct uart_port *port)
 {
 }
 
+#ifdef CONFIG_KGDB_UART
+static int kgdb_entry_state;
+
+void kgdb_put_debug_char(int chr)
+{
+	struct bfin_serial_port *uart;
+	
+	if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+		uart = &bfin_serial_ports[0];
+	else
+		uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+	
+	while (!(UART_GET_LSR(uart) & THRE)) {
+		__builtin_bfin_ssync();
+	}
+	UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+	__builtin_bfin_ssync();
+	UART_PUT_CHAR(uart, (unsigned char)chr);
+	__builtin_bfin_ssync();
+}
+
+int kgdb_get_debug_char(void)
+{
+	struct bfin_serial_port *uart;
+	unsigned char chr;
+
+	if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+		uart = &bfin_serial_ports[0];
+	else
+		uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+	
+	while(!(UART_GET_LSR(uart) & DR)) {
+		__builtin_bfin_ssync();
+	}
+	UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+	__builtin_bfin_ssync();
+	chr = UART_GET_CHAR(uart);
+	__builtin_bfin_ssync();
+
+	return chr;
+}
+#endif
+
 #ifdef CONFIG_SERIAL_BFIN_PIO
 static void local_put_char(struct bfin_serial_port *uart, char ch)
 {
@@ -152,6 +225,9 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
 {
 	struct tty_struct *tty = uart->port.info->tty;
 	unsigned int status, ch, flg;
+#ifdef CONFIG_KGDB_UART
+	struct pt_regs *regs = get_irq_regs();
+#endif
 #ifdef BF533_FAMILY
 	static int in_break = 0;
 #endif
@@ -160,6 +236,27 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
  	ch = UART_GET_CHAR(uart);
  	uart->port.icount.rx++;
 
+#ifdef CONFIG_KGDB_UART
+	if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+		if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
+			kgdb_breakkey_pressed(regs);
+			return;
+		} else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */
+			kgdb_entry_state = 1;
+		} else if (kgdb_entry_state == 1 && ch == 'q') {
+			kgdb_entry_state = 0;
+			kgdb_breakkey_pressed(regs);
+			return;
+		} else if (ch == 0x3) {/* Ctrl + C */
+			kgdb_entry_state = 0;
+			kgdb_breakkey_pressed(regs);
+			return;
+		} else {
+			kgdb_entry_state = 0;
+		}
+	}
+#endif
+ 
 #ifdef BF533_FAMILY
 	/* The BF533 family of processors have a nice misbehavior where
 	 * they continuously generate characters for a "single" break.
@@ -250,10 +347,21 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 
+#ifdef CONFIG_BF54x
+	unsigned short status;
+	spin_lock(&uart->port.lock);
+	status = UART_GET_LSR(uart);
+	while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
+		bfin_serial_rx_chars(uart);
+		status = UART_GET_LSR(uart);
+	}
+	spin_unlock(&uart->port.lock);
+#else
 	spin_lock(&uart->port.lock);
 	while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
 		bfin_serial_rx_chars(uart);
 	spin_unlock(&uart->port.lock);
+#endif
 	return IRQ_HANDLED;
 }
 
@@ -261,10 +369,21 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 {
 	struct bfin_serial_port *uart = dev_id;
 
+#ifdef CONFIG_BF54x
+	unsigned short status;
+	spin_lock(&uart->port.lock);
+	status = UART_GET_LSR(uart);
+	while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
+		bfin_serial_tx_chars(uart);
+		status = UART_GET_LSR(uart);
+	}
+	spin_unlock(&uart->port.lock);
+#else
 	spin_lock(&uart->port.lock);
 	while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
 		bfin_serial_tx_chars(uart);
 	spin_unlock(&uart->port.lock);
+#endif
 	return IRQ_HANDLED;
 }
 
@@ -275,7 +394,6 @@ static void bfin_serial_do_work(struct work_struct *work)
 
 	bfin_serial_mctrl_check(uart);
 }
-
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
@@ -324,9 +442,13 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 	set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
 	set_dma_x_modify(uart->tx_dma_channel, 1);
 	enable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+	UART_SET_IER(uart, ETBEI);
+#else
 	ier = UART_GET_IER(uart);
 	ier |= ETBEI;
 	UART_PUT_IER(uart, ier);
+#endif
 	spin_unlock_irqrestore(&uart->port.lock, flags);
 }
 
@@ -406,9 +528,13 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
 	if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
 		clear_dma_irqstat(uart->tx_dma_channel);
 		disable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+		UART_CLEAR_IER(uart, ETBEI);
+#else
 		ier = UART_GET_IER(uart);
 		ier &= ~ETBEI;
 		UART_PUT_IER(uart, ier);
+#endif
 		xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
 		uart->port.icount.tx+=uart->tx_count;
 
@@ -571,7 +697,11 @@ static int bfin_serial_startup(struct uart_port *port)
 	uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
 	add_timer(&(uart->rx_dma_timer));
 #else
+# ifdef	CONFIG_KGDB_UART
+	if (uart->port.line != CONFIG_KGDB_UART_PORT && request_irq
+# else
 	if (request_irq
+# endif
 	    (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
 	     "BFIN_UART_RX", uart)) {
 		printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
@@ -586,7 +716,11 @@ static int bfin_serial_startup(struct uart_port *port)
 		return -EBUSY;
 	}
 #endif
+#ifdef CONFIG_BF54x
+	UART_SET_IER(uart, ERBFI);
+#else
 	UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+#endif
 	return 0;
 }
 
@@ -601,6 +735,9 @@ static void bfin_serial_shutdown(struct uart_port *port)
 	free_dma(uart->rx_dma_channel);
 	del_timer(&(uart->rx_dma_timer));
 #else
+#ifdef	CONFIG_KGDB_UART
+	if (uart->port.line != CONFIG_KGDB_UART_PORT)
+#endif
 	free_irq(uart->port.irq, uart);
 	free_irq(uart->port.irq+1, uart);
 #endif
@@ -674,29 +811,41 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	/* Disable UART */
 	ier = UART_GET_IER(uart);
+#ifdef CONFIG_BF54x
+	UART_CLEAR_IER(uart, 0xF);
+#else
 	UART_PUT_IER(uart, 0);
+#endif
 
+#ifndef CONFIG_BF54x
 	/* Set DLAB in LCR to Access DLL and DLH */
 	val = UART_GET_LCR(uart);
 	val |= DLAB;
 	UART_PUT_LCR(uart, val);
 	SSYNC();
+#endif
 
 	UART_PUT_DLL(uart, quot & 0xFF);
 	SSYNC();
 	UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
 	SSYNC();
 
+#ifndef CONFIG_BF54x
 	/* Clear DLAB in LCR to Access THR RBR IER */
 	val = UART_GET_LCR(uart);
 	val &= ~DLAB;
 	UART_PUT_LCR(uart, val);
 	SSYNC();
+#endif
 
 	UART_PUT_LCR(uart, lcr);
 
 	/* Enable UART */
+#ifdef CONFIG_BF54x
+	UART_SET_IER(uart, ier);
+#else
 	UART_PUT_IER(uart, ier);
+#endif
 
 	val = UART_GET_GCTL(uart);
 	val |= UCEN;
@@ -808,15 +957,15 @@ static void __init bfin_serial_init_ports(void)
 			bfin_serial_resource[i].uart_rts_pin;
 #endif
 		bfin_serial_hw_init(&bfin_serial_ports[i]);
-
 	}
+
 }
 
 #ifdef CONFIG_SERIAL_BFIN_CONSOLE
 static void bfin_serial_console_putchar(struct uart_port *port, int ch)
 {
 	struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-	while (!(UART_GET_LSR(uart)))
+	while (!(UART_GET_LSR(uart) & THRE))
 		barrier();
 	UART_PUT_CHAR(uart, ch);
 	SSYNC();
@@ -868,18 +1017,22 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud,
 			case 2:	*bits = 7; break;
 			case 3:	*bits = 8; break;
 		}
+#ifndef CONFIG_BF54x
 		/* Set DLAB in LCR to Access DLL and DLH */
 		val = UART_GET_LCR(uart);
 		val |= DLAB;
 		UART_PUT_LCR(uart, val);
+#endif
 
 		dll = UART_GET_DLL(uart);
 		dlh = UART_GET_DLH(uart);
 
+#ifndef CONFIG_BF54x
 		/* Clear DLAB in LCR to Access THR RBR IER */
 		val = UART_GET_LCR(uart);
 		val &= ~DLAB;
 		UART_PUT_LCR(uart, val);
+#endif
 
 		*baud = get_sclk() / (16*(dll | dlh << 8));
 	}
@@ -931,6 +1084,10 @@ static int __init bfin_serial_rs_console_init(void)
 {
 	bfin_serial_init_ports();
 	register_console(&bfin_serial_console);
+#ifdef CONFIG_KGDB_UART
+	kgdb_entry_state = 0;
+	init_kgdb_uart();
+#endif
 	return 0;
 }
 console_initcall(bfin_serial_rs_console_init);
@@ -1023,6 +1180,10 @@ static struct platform_driver bfin_serial_driver = {
 static int __init bfin_serial_init(void)
 {
 	int ret;
+#ifdef CONFIG_KGDB_UART
+	struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+	struct termios t;
+#endif
 
 	pr_info("Serial: Blackfin serial driver\n");
 
@@ -1036,6 +1197,21 @@ static int __init bfin_serial_init(void)
 			uart_unregister_driver(&bfin_serial_reg);
 		}
 	}
+#ifdef CONFIG_KGDB_UART
+	if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
+		request_irq(uart->port.irq, bfin_serial_int,
+			IRQF_DISABLED, "BFIN_UART_RX", uart);
+		pr_info("Request irq for kgdb uart port\n");
+		UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+		__builtin_bfin_ssync();
+		t.c_cflag = CS8|B57600;
+		t.c_iflag = 0;
+		t.c_oflag = 0;
+		t.c_lflag = ICANON;
+		t.c_line = CONFIG_KGDB_UART_PORT;
+		bfin_serial_set_termios(&uart->port, &t, &t);
+	}
+#endif
 	return ret;
 }
 
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index 81792e6eeb2d..6767ee381cd1 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -88,7 +88,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	spin_lock_init(&brd->bd_intr_lock);
 
 	/* store which revision we have */
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+	brd->rev = pdev->revision;
 
 	brd->irq = pdev->irq;
 
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 6b76babc7fbf..a0ea43598515 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -842,12 +842,16 @@ static struct pcmcia_device_id serial_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
+	PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
 	PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
+	PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
 	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
 	PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index cf0e663b42ed..85309acb75f6 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for NEC VR4100 series Serial Interface Unit.
  *
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2007  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
  *
  *  Based on drivers/serial/8250.c, by Russell King.
  *
@@ -25,12 +25,12 @@
 #endif
 
 #include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/ioport.h>
+#include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
@@ -38,11 +38,9 @@
 #include <linux/tty_flip.h>
 
 #include <asm/io.h>
-#include <asm/vr41xx/irq.h>
 #include <asm/vr41xx/siu.h>
 #include <asm/vr41xx/vr41xx.h>
 
-#define SIU_PORTS_MAX	2
 #define SIU_BAUD_BASE	1152000
 #define SIU_MAJOR	204
 #define SIU_MINOR_BASE	82
@@ -60,32 +58,13 @@
  #define IRUSESEL	0x02
  #define SIRSEL		0x01
 
-struct siu_port {
-	unsigned int type;
-	unsigned int irq;
-	unsigned long start;
-};
-
-static const struct siu_port siu_type1_ports[] = {
-	{	.type		= PORT_VR41XX_SIU,
-		.irq		= SIU_IRQ,
-		.start		= 0x0c000000UL,		},
-};
-
-#define SIU_TYPE1_NR_PORTS	(sizeof(siu_type1_ports) / sizeof(struct siu_port))
-
-static const struct siu_port siu_type2_ports[] = {
-	{	.type		= PORT_VR41XX_SIU,
-		.irq		= SIU_IRQ,
-		.start		= 0x0f000800UL,		},
-	{	.type		= PORT_VR41XX_DSIU,
-		.irq		= DSIU_IRQ,
-		.start		= 0x0f000820UL,		},
+static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = {
+	[0 ... SIU_PORTS_MAX-1] = {
+		.lock	= __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock),
+		.irq	= -1,
+	},
 };
 
-#define SIU_TYPE2_NR_PORTS	(sizeof(siu_type2_ports) / sizeof(struct siu_port))
-
-static struct uart_port siu_uart_ports[SIU_PORTS_MAX];
 static uint8_t lsr_break_flag[SIU_PORTS_MAX];
 
 #define siu_read(port, offset)		readb((port)->membase + (offset))
@@ -110,7 +89,6 @@ void vr41xx_select_siu_interface(siu_interface_t interface)
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface);
 
 void vr41xx_use_irda(irda_use_t use)
@@ -132,7 +110,6 @@ void vr41xx_use_irda(irda_use_t use)
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_use_irda);
 
 void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed)
@@ -166,7 +143,6 @@ void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed)
 
 	spin_unlock_irqrestore(&port->lock, flags);
 }
-
 EXPORT_SYMBOL_GPL(vr41xx_select_irda_module);
 
 static inline void siu_clear_fifo(struct uart_port *port)
@@ -177,21 +153,6 @@ static inline void siu_clear_fifo(struct uart_port *port)
 	siu_write(port, UART_FCR, 0);
 }
 
-static inline int siu_probe_ports(void)
-{
-	switch (current_cpu_data.cputype) {
-	case CPU_VR4111:
-	case CPU_VR4121:
-		return SIU_TYPE1_NR_PORTS;
-	case CPU_VR4122:
-	case CPU_VR4131:
-	case CPU_VR4133:
-		return SIU_TYPE2_NR_PORTS;
-	}
-
-	return 0;
-}
-
 static inline unsigned long siu_port_size(struct uart_port *port)
 {
 	switch (port->type) {
@@ -206,21 +167,10 @@ static inline unsigned long siu_port_size(struct uart_port *port)
 
 static inline unsigned int siu_check_type(struct uart_port *port)
 {
-	switch (current_cpu_data.cputype) {
-	case CPU_VR4111:
-	case CPU_VR4121:
-		if (port->line == 0)
-			return PORT_VR41XX_SIU;
-		break;
-	case CPU_VR4122:
-	case CPU_VR4131:
-	case CPU_VR4133:
-		if (port->line == 0)
-			return PORT_VR41XX_SIU;
-		else if (port->line == 1)
-			return PORT_VR41XX_DSIU;
-		break;
-	}
+	if (port->line == 0)
+		return PORT_VR41XX_SIU;
+	if (port->line == 1 && port->irq != -1)
+		return PORT_VR41XX_DSIU;
 
 	return PORT_UNKNOWN;
 }
@@ -751,44 +701,34 @@ static struct uart_ops siu_uart_ops = {
 	.verify_port	= siu_verify_port,
 };
 
-static int siu_init_ports(void)
+static int siu_init_ports(struct platform_device *pdev)
 {
-	const struct siu_port *siu;
 	struct uart_port *port;
-	int i, num;
+	struct resource *res;
+	int *type = pdev->dev.platform_data;
+	int i;
 
-	switch (current_cpu_data.cputype) {
-	case CPU_VR4111:
-	case CPU_VR4121:
-		siu = siu_type1_ports;
-		break;
-	case CPU_VR4122:
-	case CPU_VR4131:
-	case CPU_VR4133:
-		siu = siu_type2_ports;
-		break;
-	default:
+	if (!type)
 		return 0;
-	}
 
 	port = siu_uart_ports;
-	num = siu_probe_ports();
-	for (i = 0; i < num; i++) {
-		spin_lock_init(&port->lock);
-		port->irq = siu->irq;
+	for (i = 0; i < SIU_PORTS_MAX; i++) {
+		port->type = type[i];
+		if (port->type == PORT_UNKNOWN)
+			continue;
+		port->irq = platform_get_irq(pdev, i);
 		port->uartclk = SIU_BAUD_BASE * 16;
 		port->fifosize = 16;
 		port->regshift = 0;
 		port->iotype = UPIO_MEM;
 		port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-		port->type = siu->type;
 		port->line = i;
-		port->mapbase = siu->start;
-		siu++;
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		port->mapbase = res->start;
 		port++;
 	}
 
-	return num;
+	return i;
 }
 
 #ifdef CONFIG_SERIAL_VR41XX_CONSOLE
@@ -883,13 +823,9 @@ static struct console siu_console = {
 static int __devinit siu_console_init(void)
 {
 	struct uart_port *port;
-	int num, i;
-
-	num = siu_init_ports();
-	if (num <= 0)
-		return -ENODEV;
+	int i;
 
-	for (i = 0; i < num; i++) {
+	for (i = 0; i < SIU_PORTS_MAX; i++) {
 		port = &siu_uart_ports[i];
 		port->ops = &siu_uart_ops;
 	}
@@ -920,7 +856,7 @@ static int __devinit siu_probe(struct platform_device *dev)
 	struct uart_port *port;
 	int num, i, retval;
 
-	num = siu_init_ports();
+	num = siu_init_ports(dev);
 	if (num <= 0)
 		return -ENODEV;
 
@@ -998,8 +934,6 @@ static int siu_resume(struct platform_device *dev)
 	return 0;
 }
 
-static struct platform_device *siu_platform_device;
-
 static struct platform_driver siu_device_driver = {
 	.probe		= siu_probe,
 	.remove		= __devexit_p(siu_remove),
@@ -1013,29 +947,12 @@ static struct platform_driver siu_device_driver = {
 
 static int __init vr41xx_siu_init(void)
 {
-	int retval;
-
-	siu_platform_device = platform_device_alloc("SIU", -1);
-	if (!siu_platform_device)
-		return -ENOMEM;
-
-	retval = platform_device_add(siu_platform_device);
-	if (retval < 0) {
-		platform_device_put(siu_platform_device);
-		return retval;
-	}
-
-	retval = platform_driver_register(&siu_device_driver);
-	if (retval < 0)
-		platform_device_unregister(siu_platform_device);
-
-	return retval;
+	return platform_driver_register(&siu_device_driver);
 }
 
 static void __exit vr41xx_siu_exit(void)
 {
 	platform_driver_unregister(&siu_device_driver);
-	platform_device_unregister(siu_platform_device);
 }
 
 module_init(vr41xx_siu_init);
diff --git a/drivers/spi/at25.c b/drivers/spi/at25.c
index 8efa07e8b8c2..e007833cca59 100644
--- a/drivers/spi/at25.c
+++ b/drivers/spi/at25.c
@@ -111,7 +111,8 @@ at25_ee_read(
 }
 
 static ssize_t
-at25_bin_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+	      char *buf, loff_t off, size_t count)
 {
 	struct device		*dev;
 	struct at25_data	*at25;
@@ -236,7 +237,8 @@ at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
 }
 
 static ssize_t
-at25_bin_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+	       char *buf, loff_t off, size_t count)
 {
 	struct device		*dev;
 	struct at25_data	*at25;
@@ -314,7 +316,6 @@ static int at25_probe(struct spi_device *spi)
 	 */
 	at25->bin.attr.name = "eeprom";
 	at25->bin.attr.mode = S_IRUSR;
-	at25->bin.attr.owner = THIS_MODULE;
 	at25->bin.read = at25_bin_read;
 
 	at25->bin.size = at25->chip.byte_len;
diff --git a/drivers/tc/zs.c b/drivers/tc/zs.c
index 61de78a9f6ee..ed979f13908a 100644
--- a/drivers/tc/zs.c
+++ b/drivers/tc/zs.c
@@ -136,7 +136,7 @@ struct dec_serial *zs_chain;	/* list of all channels */
 struct tty_struct zs_ttys[NUM_CHANNELS];
 
 #ifdef CONFIG_SERIAL_DEC_CONSOLE
-static struct console sercons;
+static struct console zs_console;
 #endif
 #if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
    !defined(MODULE)
@@ -383,7 +383,7 @@ static void receive_chars(struct dec_serial *info)
 
 #if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
    !defined(MODULE)
-		if (break_pressed && info->line == sercons.index) {
+		if (break_pressed && info->line == zs_console.index) {
 			/* Ignore the null char got when BREAK is removed.  */
 			if (ch == 0)
 				continue;
@@ -446,7 +446,7 @@ static void status_handle(struct dec_serial *info)
 	if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) {
 #if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
    !defined(MODULE)
-		if (info->line == sercons.index) {
+		if (info->line == zs_console.index) {
 			if (!break_pressed)
 				break_pressed = jiffies;
 		} else
@@ -1557,9 +1557,9 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 	}
 
 #ifdef CONFIG_SERIAL_DEC_CONSOLE
-	if (sercons.cflag && sercons.index == line) {
-		tty->termios->c_cflag = sercons.cflag;
-		sercons.cflag = 0;
+	if (zs_console.cflag && zs_console.index == line) {
+		tty->termios->c_cflag = zs_console.cflag;
+		zs_console.cflag = 0;
 		change_speed(info);
 	}
 #endif
@@ -2069,7 +2069,7 @@ static int __init serial_console_setup(struct console *co, char *options)
 	return 0;
 }
 
-static struct console sercons = {
+static struct console zs_console = {
 	.name		= "ttyS",
 	.write		= serial_console_write,
 	.device		= serial_console_device,
@@ -2083,7 +2083,7 @@ static struct console sercons = {
  */
 void __init zs_serial_console_init(void)
 {
-	register_console(&sercons);
+	register_console(&zs_console);
 }
 #endif /* ifdef CONFIG_SERIAL_DEC_CONSOLE */
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 24f10a19dbdb..a9cf8b30bccc 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1109,11 +1109,6 @@ void usb_root_hub_lost_power(struct usb_device *rhdev)
 
 	dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
 
-	/* Make sure no potential wakeup events get lost,
-	 * by forcing the root hub to be resumed.
-	 */
-	rhdev->dev.power.prev_state.event = PM_EVENT_ON;
-
 	spin_lock_irqsave(&device_state_lock, flags);
 	hub = hdev_to_hub(rhdev);
 	for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d975ecf18e00..00fda334dc72 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2964,7 +2964,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 			, &dev->pci->pcimstctl);
 	/* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */
 	pci_set_master (pdev);
-	pci_set_mwi (pdev);
+	pci_try_set_mwi (pdev);
 
 	/* ... also flushes any posted pci writes */
 	dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 12edc723ec73..966965f72338 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -149,8 +149,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		 * fixed in newer silicon.
 		 */
 		case 0x0068:
-			pci_read_config_dword(pdev, PCI_REVISION_ID, &temp);
-			if ((temp & 0xff) < 0xa4)
+			if (pdev->revision < 0xa4)
 				ehci->no_selective_suspend = 1;
 			break;
 		}
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 2ce050193018..2349e71b0083 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2102,7 +2102,9 @@ static ssize_t radeon_show_one_edid(char *buf, loff_t off, size_t count, const u
 }
 
 
-static ssize_t radeon_show_edid1(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t radeon_show_edid1(struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t off, size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -2113,7 +2115,9 @@ static ssize_t radeon_show_edid1(struct kobject *kobj, char *buf, loff_t off, si
 }
 
 
-static ssize_t radeon_show_edid2(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t radeon_show_edid2(struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t off, size_t count)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -2126,7 +2130,6 @@ static ssize_t radeon_show_edid2(struct kobject *kobj, char *buf, loff_t off, si
 static struct bin_attribute edid1_attr = {
 	.attr   = {
 		.name	= "edid1",
-		.owner	= THIS_MODULE,
 		.mode	= 0444,
 	},
 	.size	= EDID_LENGTH,
@@ -2136,7 +2139,6 @@ static struct bin_attribute edid1_attr = {
 static struct bin_attribute edid2_attr = {
 	.attr   = {
 		.name	= "edid2",
-		.owner	= THIS_MODULE,
 		.mode	= 0444,
 	},
 	.size	= EDID_LENGTH,
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index c65e81ff3578..7e06223bca94 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -172,7 +172,7 @@ static struct class backlight_class = {
 
 #define DECLARE_ATTR(_name,_mode,_show,_store)			\
 {							 	\
-	.attr	= { .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE },	\
+	.attr	= { .name = __stringify(_name), .mode = _mode }, \
 	.show	= _show,					\
 	.store	= _store,					\
 }
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 6ef8f0a7a137..648b53c1fdea 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -157,7 +157,7 @@ static struct class lcd_class = {
 
 #define DECLARE_ATTR(_name,_mode,_show,_store)			\
 {							 	\
-	.attr	= { .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE },	\
+	.attr	= { .name = __stringify(_name), .mode = _mode }, \
 	.show	= _show,					\
 	.store	= _store,					\
 }
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 63b85bf81a65..d3b8a6be2916 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -6,7 +6,7 @@ menu "Console display driver support"
 
 config VGA_CONSOLE
 	bool "VGA text console" if EMBEDDED || !X86
-	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH
+	depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BFIN
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a
diff --git a/drivers/video/kyro/STG4000InitDevice.c b/drivers/video/kyro/STG4000InitDevice.c
index ab5285a7f1d6..1d3f2080aa6f 100644
--- a/drivers/video/kyro/STG4000InitDevice.c
+++ b/drivers/video/kyro/STG4000InitDevice.c
@@ -247,7 +247,6 @@ int SetCoreClockPLL(volatile STG4000REG __iomem *pSTGReg, struct pci_dev *pDev)
 	u32 ulCoreClock;
 	u32 tmp;
 	u32 ulChipSpeed;
-	u8 rev;
 
 	STG_WRITE_REG(IntMask, 0xFFFF);
 
@@ -276,9 +275,9 @@ int SetCoreClockPLL(volatile STG4000REG __iomem *pSTGReg, struct pci_dev *pDev)
 		      PMX2_SOFTRESET_ROM_RST);
 
 	pci_read_config_word(pDev, PCI_CONFIG_SUBSYS_ID, &sub);
-	pci_read_config_byte(pDev, PCI_REVISION_ID, &rev);
 
-	ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub, (u32)rev);
+	ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub,
+		                         (u32)pDev->revision);
 
 	if (ulChipSpeed == 0)
 		return -EINVAL;
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index c8559a756b75..886e475f22f2 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -1994,7 +1994,6 @@ static void matroxfb_unregister_device(struct matrox_fb_info* minfo) {
 
 static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dummy) {
 	struct board* b;
-	u_int8_t rev;
 	u_int16_t svid;
 	u_int16_t sid;
 	struct matrox_fb_info* minfo;
@@ -2005,11 +2004,10 @@ static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dumm
 #endif
 	DBG(__FUNCTION__)
 
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
 	svid = pdev->subsystem_vendor;
 	sid = pdev->subsystem_device;
 	for (b = dev_list; b->vendor; b++) {
-		if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < rev)) continue;
+		if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < pdev->revision)) continue;
 		if (b->svid)
 			if ((b->svid != svid) || (b->sid != sid)) continue;
 		break;
diff --git a/drivers/video/matrox/matroxfb_crtc2.h b/drivers/video/matrox/matroxfb_crtc2.h
index 608e40bb20e9..177177609be7 100644
--- a/drivers/video/matrox/matroxfb_crtc2.h
+++ b/drivers/video/matrox/matroxfb_crtc2.h
@@ -2,8 +2,6 @@
 #define __MATROXFB_CRTC2_H__
 
 #include <linux/ioctl.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
 #include "matroxfb_base.h"
 
 struct matroxfb_dh_fb_info {
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index a30e1e13d8be..93d07ef85276 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -5789,7 +5789,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	ivideo->warncount = 0;
 	ivideo->chip_id = pdev->device;
 	ivideo->chip_vendor = pdev->vendor;
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &ivideo->revision_id);
+	ivideo->revision_id = pdev->revision;
 	ivideo->SiS_Pr.ChipRevision = ivideo->revision_id;
 	pci_read_config_word(pdev, PCI_COMMAND, &reg16);
 	ivideo->sisvga_enabled = reg16 & 0x01;
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 62fa5500361d..5eff28ce4f4d 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -1348,7 +1348,7 @@ static int __devinit sstfb_probe(struct pci_dev *pdev,
 	f_ddprintk("found device : %s\n", spec->name);
 
 	par->dev = pdev;
-	pci_read_config_byte(pdev, PCI_REVISION_ID, &par->revision);
+	par->revision = pdev->revision;
 
 	fix->mmio_start = pci_resource_start(pdev,0);
 	fix->mmio_len	= 0x400000;
diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c
index f0fde6ea7c36..5c0dab628099 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/tgafb.c
@@ -1625,8 +1625,7 @@ tgafb_register(struct device *dev)
 	par->tga_regs_base = mem_base + TGA_REGS_OFFSET;
 	par->tga_type = tga_type;
 	if (tga_bus_pci)
-		pci_read_config_byte(to_pci_dev(dev), PCI_REVISION_ID,
-				     &par->tga_chip_rev);
+		par->tga_chip_rev = (to_pci_dev(dev))->revision;
 	if (tga_bus_tc)
 		par->tga_chip_rev = TGA_READ_REG(par, TGA_START_REG) & 0xff;
 
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 904e5aeb696c..df95d6c2cefa 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -35,4 +35,17 @@ config W1_SLAVE_DS2433_CRC
 	  Each block has 30 bytes of data and a two byte CRC16.
 	  Full block writes are only allowed if the CRC is valid.
 
+config W1_SLAVE_DS2760
+	tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
+	depends on W1
+	help
+	  If you enable this you will have the DS2760 battery monitor
+	  chip support.
+
+	  The battery monitor chip is used in many batteries/devices
+	  as the one who is responsible for charging/discharging/monitoring
+	  Li+ batteries.
+
+	  If you are unsure, say N.
+
 endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index 725dcfdfddb4..a8eb7524df1d 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -5,4 +5,5 @@
 obj-$(CONFIG_W1_SLAVE_THERM)	+= w1_therm.o
 obj-$(CONFIG_W1_SLAVE_SMEM)	+= w1_smem.o
 obj-$(CONFIG_W1_SLAVE_DS2433)	+= w1_ds2433.o
+obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 8ea17a53eed8..cab56005dd49 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -91,8 +91,9 @@ static int w1_f23_refresh_block(struct w1_slave *sl, struct w1_f23_data *data,
 }
 #endif	/* CONFIG_W1_SLAVE_DS2433_CRC */
 
-static ssize_t w1_f23_read_bin(struct kobject *kobj, char *buf, loff_t off,
-			       size_t count)
+static ssize_t w1_f23_read_bin(struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 #ifdef CONFIG_W1_SLAVE_DS2433_CRC
@@ -199,8 +200,9 @@ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
 	return 0;
 }
 
-static ssize_t w1_f23_write_bin(struct kobject *kobj, char *buf, loff_t off,
-				size_t count)
+static ssize_t w1_f23_write_bin(struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 	int addr, len, idx;
@@ -252,7 +254,6 @@ static struct bin_attribute w1_f23_bin_attr = {
 	.attr = {
 		.name = "eeprom",
 		.mode = S_IRUGO | S_IWUSR,
-		.owner = THIS_MODULE,
 	},
 	.size = W1_EEPROM_SIZE,
 	.read = w1_f23_read_bin,
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
new file mode 100644
index 000000000000..88a37fbccc3f
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -0,0 +1,213 @@
+/*
+ * 1-Wire implementation for the ds2760 chip
+ *
+ * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/idr.h>
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+#include "w1_ds2760.h"
+
+static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
+			int io)
+{
+	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+	if (!dev)
+		return 0;
+
+	mutex_lock(&sl->master->mutex);
+
+	if (addr > DS2760_DATA_SIZE || addr < 0) {
+		count = 0;
+		goto out;
+	}
+	if (addr + count > DS2760_DATA_SIZE)
+		count = DS2760_DATA_SIZE - addr;
+
+	if (!w1_reset_select_slave(sl)) {
+		if (!io) {
+			w1_write_8(sl->master, W1_DS2760_READ_DATA);
+			w1_write_8(sl->master, addr);
+			count = w1_read_block(sl->master, buf, count);
+		} else {
+			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
+			w1_write_8(sl->master, addr);
+			w1_write_block(sl->master, buf, count);
+			/* XXX w1_write_block returns void, not n_written */
+		}
+	}
+
+out:
+	mutex_unlock(&sl->master->mutex);
+
+	return count;
+}
+
+int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 0);
+}
+
+int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 1);
+}
+
+static ssize_t w1_ds2760_read_bin(struct kobject *kobj, char *buf, loff_t off,
+				  size_t count)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	return w1_ds2760_read(dev, buf, off, count);
+}
+
+static struct bin_attribute w1_ds2760_bin_attr = {
+	.attr = {
+		.name = "w1_slave",
+		.mode = S_IRUGO,
+		.owner = THIS_MODULE,
+	},
+	.size = DS2760_DATA_SIZE,
+	.read = w1_ds2760_read_bin,
+};
+
+static DEFINE_IDR(bat_idr);
+static DEFINE_MUTEX(bat_idr_lock);
+
+static int new_bat_id(void)
+{
+	int ret;
+
+	while (1) {
+		int id;
+
+		ret = idr_pre_get(&bat_idr, GFP_KERNEL);
+		if (ret == 0)
+			return -ENOMEM;
+
+		mutex_lock(&bat_idr_lock);
+		ret = idr_get_new(&bat_idr, NULL, &id);
+		mutex_unlock(&bat_idr_lock);
+
+		if (ret == 0) {
+			ret = id & MAX_ID_MASK;
+			break;
+		} else if (ret == -EAGAIN) {
+			continue;
+		} else {
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static void release_bat_id(int id)
+{
+	mutex_lock(&bat_idr_lock);
+	idr_remove(&bat_idr, id);
+	mutex_unlock(&bat_idr_lock);
+
+	return;
+}
+
+static int w1_ds2760_add_slave(struct w1_slave *sl)
+{
+	int ret;
+	int id;
+	struct platform_device *pdev;
+
+	id = new_bat_id();
+	if (id < 0) {
+		ret = id;
+		goto noid;
+	}
+
+	pdev = platform_device_alloc("ds2760-battery", id);
+	if (!pdev) {
+		ret = -ENOMEM;
+		goto pdev_alloc_failed;
+	}
+	pdev->dev.parent = &sl->dev;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto pdev_add_failed;
+
+	ret = sysfs_create_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
+	if (ret)
+		goto bin_attr_failed;
+
+	dev_set_drvdata(&sl->dev, pdev);
+
+	goto success;
+
+bin_attr_failed:
+pdev_add_failed:
+	platform_device_unregister(pdev);
+pdev_alloc_failed:
+	release_bat_id(id);
+noid:
+success:
+	return ret;
+}
+
+static void w1_ds2760_remove_slave(struct w1_slave *sl)
+{
+	struct platform_device *pdev = dev_get_drvdata(&sl->dev);
+	int id = pdev->id;
+
+	platform_device_unregister(pdev);
+	release_bat_id(id);
+	sysfs_remove_bin_file(&sl->dev.kobj, &w1_ds2760_bin_attr);
+
+	return;
+}
+
+static struct w1_family_ops w1_ds2760_fops = {
+	.add_slave    = w1_ds2760_add_slave,
+	.remove_slave = w1_ds2760_remove_slave,
+};
+
+static struct w1_family w1_ds2760_family = {
+	.fid = W1_FAMILY_DS2760,
+	.fops = &w1_ds2760_fops,
+};
+
+static int __init w1_ds2760_init(void)
+{
+	printk(KERN_INFO "1-Wire driver for the DS2760 battery monitor "
+	       " chip  - (c) 2004-2005, Szabolcs Gyurko\n");
+	idr_init(&bat_idr);
+	return w1_register_family(&w1_ds2760_family);
+}
+
+static void __exit w1_ds2760_exit(void)
+{
+	w1_unregister_family(&w1_ds2760_family);
+	idr_destroy(&bat_idr);
+}
+
+EXPORT_SYMBOL(w1_ds2760_read);
+EXPORT_SYMBOL(w1_ds2760_write);
+
+module_init(w1_ds2760_init);
+module_exit(w1_ds2760_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
+MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
new file mode 100644
index 000000000000..f1302429cb02
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds2760.h
@@ -0,0 +1,50 @@
+/*
+ * 1-Wire implementation for the ds2760 chip
+ *
+ * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#ifndef __w1_ds2760_h__
+#define __w1_ds2760_h__
+
+/* Known commands to the DS2760 chip */
+#define W1_DS2760_SWAP			0xAA
+#define W1_DS2760_READ_DATA		0x69
+#define W1_DS2760_WRITE_DATA		0x6C
+#define W1_DS2760_COPY_DATA		0x48
+#define W1_DS2760_RECALL_DATA		0xB8
+#define W1_DS2760_LOCK			0x6A
+
+/* Number of valid register addresses */
+#define DS2760_DATA_SIZE		0x40
+
+#define DS2760_PROTECTION_REG		0x00
+#define DS2760_STATUS_REG		0x01
+#define DS2760_EEPROM_REG		0x07
+#define DS2760_SPECIAL_FEATURE_REG	0x08
+#define DS2760_VOLTAGE_MSB		0x0c
+#define DS2760_VOLTAGE_LSB		0x0d
+#define DS2760_CURRENT_MSB		0x0e
+#define DS2760_CURRENT_LSB		0x0f
+#define DS2760_CURRENT_ACCUM_MSB	0x10
+#define DS2760_CURRENT_ACCUM_LSB	0x11
+#define DS2760_TEMP_MSB			0x18
+#define DS2760_TEMP_LSB			0x19
+#define DS2760_EEPROM_BLOCK0		0x20
+#define DS2760_ACTIVE_FULL		0x20
+#define DS2760_EEPROM_BLOCK1		0x30
+#define DS2760_RATED_CAPACITY		0x32
+#define DS2760_CURRENT_OFFSET_BIAS	0x33
+#define DS2760_ACTIVE_EMPTY		0x3b
+
+extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
+			  size_t count);
+extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
+			   size_t count);
+
+#endif /* !__w1_ds2760_h__ */
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 1a6937dc190b..4318935678c5 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -42,13 +42,13 @@ static u8 bad_roms[][9] = {
 				{}
 			};
 
-static ssize_t w1_therm_read_bin(struct kobject *, char *, loff_t, size_t);
+static ssize_t w1_therm_read_bin(struct kobject *, struct bin_attribute *,
+				 char *, loff_t, size_t);
 
 static struct bin_attribute w1_therm_bin_attr = {
 	.attr = {
 		.name = "w1_slave",
 		.mode = S_IRUGO,
-		.owner = THIS_MODULE,
 	},
 	.size = W1_SLAVE_DATA_SIZE,
 	.read = w1_therm_read_bin,
@@ -159,7 +159,9 @@ static int w1_therm_check_rom(u8 rom[9])
 	return 0;
 }
 
-static ssize_t w1_therm_read_bin(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_therm_read_bin(struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t off, size_t count)
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 	struct w1_master *dev = sl->master;
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 7d6876dbcc96..f5c5b760ed7b 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -105,7 +105,9 @@ static ssize_t w1_slave_read_name(struct device *dev, struct device_attribute *a
 	return sprintf(buf, "%s\n", sl->name);
 }
 
-static ssize_t w1_slave_read_id(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_slave_read_id(struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 
@@ -128,7 +130,6 @@ static struct bin_attribute w1_slave_attr_bin_id = {
       .attr = {
               .name = "id",
               .mode = S_IRUGO,
-              .owner = THIS_MODULE,
       },
       .size = 8,
       .read = w1_slave_read_id,
@@ -136,7 +137,9 @@ static struct bin_attribute w1_slave_attr_bin_id = {
 
 /* Default family */
 
-static ssize_t w1_default_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_default_write(struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 
@@ -153,7 +156,9 @@ out_up:
 	return count;
 }
 
-static ssize_t w1_default_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_default_read(struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
 {
 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
 
@@ -167,7 +172,6 @@ static struct bin_attribute w1_default_attr = {
       .attr = {
               .name = "rw",
               .mode = S_IRUGO | S_IWUSR,
-              .owner = THIS_MODULE,
       },
       .size = PAGE_SIZE,
       .read = w1_default_read,
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 1e2ac40c2c14..ef1e1dafa19a 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -33,6 +33,7 @@
 #define W1_THERM_DS1822  	0x22
 #define W1_EEPROM_DS2433  	0x23
 #define W1_THERM_DS18B20 	0x28
+#define W1_FAMILY_DS2760	0x30
 
 #define MAXNAMELEN		32
 
diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c
index c3ba0ec334c4..9130f1c12c26 100644
--- a/drivers/zorro/zorro-sysfs.c
+++ b/drivers/zorro/zorro-sysfs.c
@@ -49,8 +49,9 @@ static ssize_t zorro_show_resource(struct device *dev, struct device_attribute *
 
 static DEVICE_ATTR(resource, S_IRUGO, zorro_show_resource, NULL);
 
-static ssize_t zorro_read_config(struct kobject *kobj, char *buf, loff_t off,
-				 size_t count)
+static ssize_t zorro_read_config(struct kobject *kobj,
+				 struct bin_attribute *bin_attr,
+				 char *buf, loff_t off, size_t count)
 {
 	struct zorro_dev *z = to_zorro_dev(container_of(kobj, struct device,
 					   kobj));
@@ -78,7 +79,6 @@ static struct bin_attribute zorro_config_attr = {
 	.attr =	{
 		.name = "config",
 		.mode = S_IRUGO | S_IWUSR,
-		.owner = THIS_MODULE
 	},
 	.size = sizeof(struct ConfigDev),
 	.read = zorro_read_config,