diff options
Diffstat (limited to 'drivers')
32 files changed, 48 insertions, 49 deletions
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 7594f65800cf..4bc1c4178f50 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -1406,7 +1406,7 @@ acpi_os_invalidate_address( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SytemMemory + /* Only interference checks against SystemIO and SystemMemory are needed */ res.start = address; res.end = address + length - 1; @@ -1458,7 +1458,7 @@ acpi_os_validate_address ( switch (space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SytemMemory + /* Only interference checks against SystemIO and SystemMemory are needed */ res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL); if (!res) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index ddc76787b842..f74d3b31e5c9 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -172,7 +172,6 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state) return -EINVAL; /* The state of the list is 'on' IFF all resources are 'on'. */ - /* */ for (i = 0; i < list->count; i++) { /* diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 83bc49fac9bb..ec52fc618763 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -43,7 +43,7 @@ * driver the list of errata that are relevant is below, going back to * PIIX4. Older device documentation is now a bit tricky to find. * - * The chipsets all follow very much the same design. The orginal Triton + * The chipsets all follow very much the same design. The original Triton * series chipsets do _not_ support independant device timings, but this * is fixed in Triton II. With the odd mobile exception the chips then * change little except in gaining more modes until SATA arrives. This diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c index 7fef305774de..89d871ef8c2f 100644 --- a/drivers/char/bsr.c +++ b/drivers/char/bsr.c @@ -253,7 +253,7 @@ static int bsr_add_node(struct device_node *bn) cur->bsr_device = device_create(bsr_class, NULL, cur->bsr_dev, cur, cur->bsr_name); - if (!cur->bsr_device) { + if (IS_ERR(cur->bsr_device)) { printk(KERN_ERR "device_create failed for %s\n", cur->bsr_name); cdev_del(&cur->bsr_cdev); diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 0cf4d7f562c5..c9388fbb3bcc 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -1346,7 +1346,7 @@ static void bus_reset_tasklet(unsigned long data) * was set up before this reset, the old one is now no longer * in use and we can free it. Update the config rom pointers * to point to the current config rom and clear the - * next_config_rom pointer so a new udpate can take place. + * next_config_rom pointer so a new update can take place. */ if (ohci->next_config_rom != NULL) { diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index f7ba82ebf65a..2092e7bb788f 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -961,7 +961,7 @@ int drm_addbufs_pci(struct drm_device * dev, struct drm_buf_desc * request) dma->buflist[i + dma->buf_count] = &entry->buflist[i]; } - /* No allocations failed, so now we can replace the orginal pagelist + /* No allocations failed, so now we can replace the original pagelist * with the new one. */ if (dma->page_count) { diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e7356fb6c918..9c920396d702 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -905,9 +905,9 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, memset(best_clock, 0, sizeof(*best_clock)); max_n = limit->n.max; - /* based on hardware requriment prefer smaller n to precision */ + /* based on hardware requirement, prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { - /* based on hardware requirment prefere larger m1,m2 */ + /* based on hardware requirement, prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { for (clock.m2 = limit->m2.max; diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 6732b5dd8ff4..e91a815861f4 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -3780,7 +3780,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT UCHAR ucReserved[2]; }ATOM_ASIC_SS_ASSIGNMENT; -//Define ucClockIndication, SW uses the IDs below to search if the SS is requried/enabled on a clock branch/signal type. +//Define ucClockIndication, SW uses the IDs below to search if the SS is required/enabled on a clock branch/signal type. //SS is not required or enabled if a match is not found. #define ASIC_INTERNAL_MEMORY_SS 1 #define ASIC_INTERNAL_ENGINE_SS 2 @@ -5895,7 +5895,7 @@ typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO UCHAR ucPadding; // For proper alignment and size. USHORT usVDDC; // For the 780, use: None, Low, High, Variable UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} - UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement. + UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement. USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). ULONG ulFlags; } ATOM_PPLIB_RS780_CLOCK_INFO; diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 37d12e5efa49..1d7aea132a09 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -1474,7 +1474,7 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd) /** * ipath_pe_put_tid - write a TID in chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index fbf8c5379ea8..4b4a30b0dabd 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -1328,7 +1328,7 @@ bail: /** * ipath_pe_put_tid - write a TID in chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * @@ -1394,7 +1394,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr, /** * ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index a805402dd4ae..34b778ed97fc 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -1738,7 +1738,7 @@ bail: /** * ipath_7220_put_tid - write a TID to the chip * @dd: the infinipath device - * @tidptr: pointer to the expected TID (in chip) to udpate + * @tidptr: pointer to the expected TID (in chip) to update * @tidtype: 0 for eager, 1 for expected * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing * diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 75e71b5d9215..095ed76ebe80 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -117,7 +117,7 @@ * NOTE: only one mode value must be given for every card. * -> See hfc_multi.h for HFC_IO_MODE_* values * By default, the IO mode is pci memory IO (MEMIO). - * Some cards requre specific IO mode, so it cannot be changed. + * Some cards require specific IO mode, so it cannot be changed. * It may be usefull to set IO mode to register io (REGIO) to solve * PCI bridge problems. * If unsure, don't give this parameter. diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c index 051b44e2556c..384d5118e325 100644 --- a/drivers/isdn/hisax/hfc4s8s_l1.c +++ b/drivers/isdn/hisax/hfc4s8s_l1.c @@ -310,7 +310,7 @@ wait_busy(hfc4s8s_hw * a) /******************************************************/ /* function to read critical counter registers that */ -/* may be udpated by the chip during read */ +/* may be updated by the chip during read */ /******************************************************/ static u_char Read_hfc8_stable(hfc4s8s_hw * hw, int reg) diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c index 565d5b2adc95..129cda737880 100644 --- a/drivers/macintosh/windfarm_pm81.c +++ b/drivers/macintosh/windfarm_pm81.c @@ -188,7 +188,7 @@ struct wf_smu_sys_fans_state { }; /* - * Configs for SMU Sytem Fan control loop + * Configs for SMU System Fan control loop */ static struct wf_smu_sys_fans_param wf_smu_sys_all_params[] = { /* Model ID 2 */ diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c index d14bd227b502..93c21ddd0b77 100644 --- a/drivers/media/dvb/dvb-usb/friio-fe.c +++ b/drivers/media/dvb/dvb-usb/friio-fe.c @@ -300,7 +300,7 @@ static int jdvbt90502_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { /** - * NOTE: ignore all the paramters except frequency. + * NOTE: ignore all the parameters except frequency. * others should be fixed to the proper value for ISDB-T, * but don't check here. */ diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 760069345b11..fd1f29e0317d 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -683,7 +683,7 @@ struct drv_func_mb { #define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 #define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 /* - * The optic module verification commands requris bootcode + * The optic module verification commands require bootcode * v5.0.6 or later */ #define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000 diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index f0be507e5324..369a8016b1ff 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -96,7 +96,7 @@ static inline int precise_ie(void) * post_eurus_cmd helpers */ struct eurus_cmd_arg_info { - int pre_arg; /* command requres arg1, arg2 at POST COMMAND */ + int pre_arg; /* command requires arg1, arg2 at POST COMMAND */ int post_arg; /* command requires arg1, arg2 at GET_RESULT */ }; diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index cbf520d38eac..ffbaa608e002 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -736,7 +736,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev) SMSC_TRACE(HW, "configuring for carrier OK"); if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && (!pdata->using_extphy)) { - /* Restore orginal GPIO configuration */ + /* Restore original GPIO configuration */ pdata->gpio_setting = pdata->gpio_orig_setting; smsc911x_reg_write(pdata, GPIO_CFG, pdata->gpio_setting); @@ -750,7 +750,7 @@ static void smsc911x_phy_adjust_link(struct net_device *dev) if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && (!pdata->using_extphy)) { /* Force 10/100 LED off, after saving - * orginal GPIO configuration */ + * original GPIO configuration */ pdata->gpio_orig_setting = pdata->gpio_setting; pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index f184d1d2ecbe..6644337d63d6 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -848,7 +848,7 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_disable_device; } - /* Check for the proper subsytem ID's + /* Check for the proper subsystem ID's * Intel uses a different SSID programming model than Compaq. * For Intel, each SSID bit identifies a PHP capability. * Also Intel HPC's may have RID=0. diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5ea587e59e48..9a3d3309f896 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1507,7 +1507,7 @@ int pci_prepare_to_sleep(struct pci_dev *dev) * pci_back_from_sleep - turn PCI device on during system-wide transition into working state * @dev: Device to handle. * - * Disable device's sytem wake-up capability and put it into D0. + * Disable device's system wake-up capability and put it into D0. */ int pci_back_from_sleep(struct pci_dev *dev) { diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c index 3cbaf1811bd0..d37c445f0eda 100644 --- a/drivers/ps3/ps3-sys-manager.c +++ b/drivers/ps3/ps3-sys-manager.c @@ -119,7 +119,7 @@ enum ps3_sys_manager_service_id { * enum ps3_sys_manager_attr - Notification attribute (bit position mask). * @PS3_SM_ATTR_POWER: Power button. * @PS3_SM_ATTR_RESET: Reset button, not available on retail console. - * @PS3_SM_ATTR_THERMAL: Sytem thermal alert. + * @PS3_SM_ATTR_THERMAL: System thermal alert. * @PS3_SM_ATTR_CONTROLLER: Remote controller event. * @PS3_SM_ATTR_ALL: Logical OR of all. * diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 2b4e40d31190..51cf2bb37438 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1540,7 +1540,7 @@ EXPORT_SYMBOL_GPL(regulator_count_voltages); * Context: can sleep * * Returns a voltage that can be passed to @regulator_set_voltage(), - * zero if this selector code can't be used on this sytem, or a + * zero if this selector code can't be used on this system, or a * negative errno. */ int regulator_list_voltage(struct regulator *regulator, unsigned selector) diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c index c9522f3bc21c..9718aaaa8215 100644 --- a/drivers/rtc/rtc-rx8581.c +++ b/drivers/rtc/rtc-rx8581.c @@ -1,8 +1,8 @@ /* * An I2C driver for the Epson RX8581 RTC * - * Author: Martyn Welch <martyn.welch@gefanuc.com> - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Author: Martyn Welch <martyn.welch@ge.com> + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -272,7 +272,7 @@ static void __exit rx8581_exit(void) i2c_del_driver(&rx8581_driver); } -MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>"); +MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com>"); MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c index 875ba099e7a5..b53a00198dbe 100644 --- a/drivers/rtc/rtc-stk17ta8.c +++ b/drivers/rtc/rtc-stk17ta8.c @@ -1,7 +1,7 @@ /* * A RTC driver for the Simtek STK17TA8 * - * By Thomas Hommel <thomas.hommel@gefanuc.com> + * By Thomas Hommel <thomas.hommel@ge.com> * * Based on the DS1553 driver from * Atsushi Nemoto <anemo@mba.ocn.ne.jp> @@ -382,7 +382,7 @@ static __exit void stk17ta8_exit(void) module_init(stk17ta8_init); module_exit(stk17ta8_exit); -MODULE_AUTHOR("Thomas Hommel <thomas.hommel@gefanuc.com>"); +MODULE_AUTHOR("Thomas Hommel <thomas.hommel@ge.com>"); MODULE_DESCRIPTION("Simtek STK17TA8 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); diff --git a/drivers/s390/char/sclp_cpi_sys.c b/drivers/s390/char/sclp_cpi_sys.c index 62c2647f37f4..4a51e3f09689 100644 --- a/drivers/s390/char/sclp_cpi_sys.c +++ b/drivers/s390/char/sclp_cpi_sys.c @@ -102,7 +102,7 @@ static struct sclp_req *cpi_prepare_req(void) /* set system name */ set_data(evb->system_name, system_name); - /* set sytem level */ + /* set system level */ evb->system_level = system_level; /* set sysplex name */ diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h index b0ac9ac15c5d..6eaf519eccdc 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_cee.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_cee.h @@ -50,7 +50,7 @@ struct bfa_cee_lldp_str_s { }; -/* LLDP paramters */ +/* LLDP parameters */ struct bfa_cee_lldp_cfg_s { struct bfa_cee_lldp_str_s chassis_id; struct bfa_cee_lldp_str_s port_id; diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h index 4374494bd566..ec78b4cb121a 100644 --- a/drivers/scsi/bfa/include/defs/bfa_defs_status.h +++ b/drivers/scsi/bfa/include/defs/bfa_defs_status.h @@ -223,9 +223,9 @@ enum bfa_status { BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to * Non-Zero Value */ BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network - * Subsytem Lock Failed.Please + * Subsystem Lock Failed.Please * try after some time */ - BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem + BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsystem * handle Failed. Please try * after some time */ BFA_STATUS_IM_NOT_BOUND = 143, /* IM driver is not active */ diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 14d052316502..e324627d97a2 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -640,7 +640,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) } mpc8xxx_spi = spi_master_get_devdata(spi->master); - hw_mode = cs->hw_mode; /* Save orginal settings */ + hw_mode = cs->hw_mode; /* Save original settings */ cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); /* mask out bits we are going to set */ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH diff --git a/drivers/staging/vt6655/rxtx.c b/drivers/staging/vt6655/rxtx.c index ed3070edcac1..4fcc4351e73f 100644 --- a/drivers/staging/vt6655/rxtx.c +++ b/drivers/staging/vt6655/rxtx.c @@ -25,19 +25,19 @@ * Date: May 20, 2003 * * Functions: - * s_vGenerateTxParameter - Generate tx dma requried parameter. + * s_vGenerateTxParameter - Generate tx dma required parameter. * vGenerateMACHeader - Translate 802.3 to 802.11 header - * cbGetFragCount - Caculate fragement number count + * cbGetFragCount - Caculate fragment number count * csBeacon_xmit - beacon tx function * csMgmt_xmit - management tx function * s_cbFillTxBufHead - fulfill tx dma buffer header * s_uGetDataDuration - get tx data required duration * s_uFillDataHead- fulfill tx data duration header - * s_uGetRTSCTSDuration- get rtx/cts requried duration + * s_uGetRTSCTSDuration- get rtx/cts required duration * s_uGetRTSCTSRsvTime- get rts/cts reserved time * s_uGetTxRsvTime- get frame reserved time * s_vFillCTSHead- fulfill CTS ctl header - * s_vFillFragParameter- Set fragement ctl parameter. + * s_vFillFragParameter- Set fragment ctl parameter. * s_vFillRTSHead- fulfill RTS ctl header * s_vFillTxKey- fulfill tx encrypt key * s_vSWencryption- Software encrypt header @@ -877,7 +877,7 @@ s_vFillRTSHead ( } // Note: So far RTSHead dosen't appear in ATIM & Beacom DMA, so we don't need to take them into account. - // Otherwise, we need to modified codes for them. + // Otherwise, we need to modify codes for them. if (byPktType == PK_TYPE_11GB || byPktType == PK_TYPE_11GA) { if (byFBOption == AUTO_FB_NONE) { PSRTS_g pBuf = (PSRTS_g)pvRTS; @@ -1133,7 +1133,7 @@ s_vFillCTSHead ( * * Parameters: * In: - * pDevice - Pointer to adpater + * pDevice - Pointer to adapter * pTxDataHead - Transmit Data Buffer * pTxBufHead - pTxBufHead * pvRrvTime - pvRrvTime @@ -2252,7 +2252,7 @@ vGenerateFIFOHeader ( * * Parameters: * In: - * pDevice - Pointer to adpater + * pDevice - Pointer to adapter * dwTxBufferAddr - Transmit Buffer * pPacket - Packet from upper layer * cbPacketSize - Transmit Data Length diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c index d9fa36c95230..a2ce6fad8ee5 100644 --- a/drivers/staging/vt6656/rxtx.c +++ b/drivers/staging/vt6656/rxtx.c @@ -25,17 +25,17 @@ * Date: May 20, 2003 * * Functions: - * s_vGenerateTxParameter - Generate tx dma requried parameter. + * s_vGenerateTxParameter - Generate tx dma required parameter. * s_vGenerateMACHeader - Translate 802.3 to 802.11 header * csBeacon_xmit - beacon tx function * csMgmt_xmit - management tx function * s_uGetDataDuration - get tx data required duration * s_uFillDataHead- fulfill tx data duration header - * s_uGetRTSCTSDuration- get rtx/cts requried duration + * s_uGetRTSCTSDuration- get rtx/cts required duration * s_uGetRTSCTSRsvTime- get rts/cts reserved time * s_uGetTxRsvTime- get frame reserved time * s_vFillCTSHead- fulfill CTS ctl header - * s_vFillFragParameter- Set fragement ctl parameter. + * s_vFillFragParameter- Set fragment ctl parameter. * s_vFillRTSHead- fulfill RTS ctl header * s_vFillTxKey- fulfill tx encrypt key * s_vSWencryption- Software encrypt header diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 112ef7e26f6b..608d61a105f6 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -76,7 +76,7 @@ * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end * we are going to have to rebuild all this based on an scheduler, * to where we have a list of transactions to do and based on the - * availability of the different requried components (blocks, + * availability of the different required components (blocks, * rpipes, segment slots, etc), we go scheduling them. Painful. */ #include <linux/init.h> diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 24747aef1952..95896f387927 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -655,7 +655,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, /* we use the subsystem vendor/device id as the virtio vendor/device * id. this allows us to use the same PCI vendor/device id for all * virtio devices and to identify the particular virtio driver by - * the subsytem ids */ + * the subsystem ids */ vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor; vp_dev->vdev.id.device = pci_dev->subsystem_device; |
