diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/phy/phy-dm816x-usb.c | 4 | ||||
| -rw-r--r-- | drivers/phy/phy-twl4030-usb.c | 4 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-atmel.c | 6 | ||||
| -rw-r--r-- | drivers/usb/host/ehci.h | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 8 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-nxp.c | 80 | ||||
| -rw-r--r-- | drivers/usb/host/ohci.h | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-mtk.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-plat.c | 6 | ||||
| -rw-r--r-- | drivers/usb/misc/idmouse.c | 2 | ||||
| -rw-r--r-- | drivers/usb/usbip/usbip_protocol.txt | 358 |
13 files changed, 38 insertions, 463 deletions
diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/phy-dm816x-usb.c index b4bbef664d20..cbcce7cf0028 100644 --- a/drivers/phy/phy-dm816x-usb.c +++ b/drivers/phy/phy-dm816x-usb.c @@ -118,7 +118,7 @@ static const struct phy_ops ops = { .owner = THIS_MODULE, }; -static int dm816x_usb_phy_runtime_suspend(struct device *dev) +static int __maybe_unused dm816x_usb_phy_runtime_suspend(struct device *dev) { struct dm816x_usb_phy *phy = dev_get_drvdata(dev); unsigned int mask, val; @@ -136,7 +136,7 @@ static int dm816x_usb_phy_runtime_suspend(struct device *dev) return 0; } -static int dm816x_usb_phy_runtime_resume(struct device *dev) +static int __maybe_unused dm816x_usb_phy_runtime_resume(struct device *dev) { struct dm816x_usb_phy *phy = dev_get_drvdata(dev); unsigned int mask, val; diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 840f3eae428b..6b6af6cba454 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -391,7 +391,7 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on) WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); } -static int twl4030_usb_runtime_suspend(struct device *dev) +static int __maybe_unused twl4030_usb_runtime_suspend(struct device *dev) { struct twl4030_usb *twl = dev_get_drvdata(dev); @@ -405,7 +405,7 @@ static int twl4030_usb_runtime_suspend(struct device *dev) return 0; } -static int twl4030_usb_runtime_resume(struct device *dev) +static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev) { struct twl4030_usb *twl = dev_get_drvdata(dev); int res; diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index fa23967ccfb3..38cc4bae0a82 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4344,7 +4344,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, { struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); - int i, j, retval; + int retries, operations, retval, i; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; const char *speed; @@ -4449,7 +4449,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * first 8 bytes of the device descriptor to get the ep0 maxpacket * value. */ - for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) { + for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { bool did_new_scheme = false; if (use_new_scheme(udev, retry_counter)) { @@ -4476,7 +4476,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * 255 is for WUSB devices, we actually need to use * 512 (WUSB1.0[4.8.1]). */ - for (j = 0; j < 3; ++j) { + for (operations = 0; operations < 3; ++operations) { buf->bMaxPacketSize0 = 0; r = usb_control_msg(udev, usb_rcvaddr0pipe(), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, @@ -4502,7 +4502,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * reset. But only on the first attempt, * lest we get into a time out/reset loop */ - if (r == 0 || (r == -ETIMEDOUT && j == 0)) + if (r == 0 || (r == -ETIMEDOUT && retries == 0)) break; } udev->descriptor.bMaxPacketSize0 = @@ -4534,7 +4534,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * authorization will assign the final address. */ if (udev->wusb == 0) { - for (j = 0; j < SET_ADDRESS_TRIES; ++j) { + for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) { retval = hub_set_address(udev, devnum); if (retval >= 0) break; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 8c20ebbc049c..3050b18b2447 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -18,7 +18,7 @@ config USB_C67X00_HCD config USB_XHCI_HCD tristate "xHCI HCD (USB 3.0) support" - depends on HAS_IOMEM + depends on HAS_DMA && HAS_IOMEM ---help--- The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -73,7 +73,7 @@ endif # USB_XHCI_HCD config USB_EHCI_HCD tristate "EHCI HCD (USB 2.0) support" - depends on HAS_IOMEM + depends on HAS_DMA && HAS_IOMEM ---help--- The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. @@ -364,8 +364,7 @@ config USB_ISP1362_HCD config USB_FOTG210_HCD tristate "FOTG210 HCD support" - depends on USB - depends on HAS_IOMEM + depends on USB && HAS_DMA && HAS_IOMEM ---help--- Faraday FOTG210 is an OTG controller which can be configured as an USB2.0 host. It is designed to meet USB2.0 EHCI specification @@ -387,7 +386,7 @@ config USB_MAX3421_HCD config USB_OHCI_HCD tristate "OHCI HCD (USB 1.1) support" - depends on HAS_IOMEM + depends on HAS_DMA && HAS_IOMEM ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index be0964a801e8..7440722bfbf0 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -185,8 +185,7 @@ static int ehci_atmel_drv_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int ehci_atmel_drv_suspend(struct device *dev) +static int __maybe_unused ehci_atmel_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd); @@ -200,7 +199,7 @@ static int ehci_atmel_drv_suspend(struct device *dev) return 0; } -static int ehci_atmel_drv_resume(struct device *dev) +static int __maybe_unused ehci_atmel_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct atmel_ehci_priv *atmel_ehci = hcd_to_atmel_ehci_priv(hcd); @@ -208,7 +207,6 @@ static int ehci_atmel_drv_resume(struct device *dev) atmel_start_clock(atmel_ehci); return ehci_resume(hcd, false); } -#endif #ifdef CONFIG_OF static const struct of_device_id atmel_ehci_dt_ids[] = { diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 2ddf35203c05..3f3b74aeca97 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -888,12 +888,10 @@ extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr, u32 mask, u32 done, int usec); extern int ehci_reset(struct ehci_hcd *ehci); -#ifdef CONFIG_PM extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup); extern int ehci_resume(struct usb_hcd *hcd, bool force_reset); extern void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, bool suspending, bool do_wakeup); -#endif /* CONFIG_PM */ extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 8c6e15bd6ff0..f789d2954c5d 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -583,9 +583,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM - -static int +static int __maybe_unused ohci_hcd_at91_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -630,7 +628,8 @@ ohci_hcd_at91_drv_suspend(struct device *dev) return ret; } -static int ohci_hcd_at91_drv_resume(struct device *dev) +static int __maybe_unused +ohci_hcd_at91_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); @@ -643,7 +642,6 @@ static int ohci_hcd_at91_drv_resume(struct device *dev) ohci_resume(hcd, false); return 0; } -#endif static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend, ohci_hcd_at91_drv_resume); diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index ebacf97fc406..b7d4756232ae 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -34,16 +34,6 @@ #include <mach/hardware.h> #define USB_CONFIG_BASE 0x31020000 -#define PWRMAN_BASE 0x40004000 - -#define USB_CTRL IO_ADDRESS(PWRMAN_BASE + 0x64) - -/* USB_CTRL bit defines */ -#define USB_SLAVE_HCLK_EN (1 << 24) -#define USB_DEV_NEED_CLK_EN (1 << 22) -#define USB_HOST_NEED_CLK_EN (1 << 21) -#define PAD_CONTROL_LAST_DRIVEN (1 << 19) - #define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110) /* USB_OTG_STAT_CONTROL bit defines */ @@ -68,9 +58,7 @@ static struct i2c_client *isp1301_i2c_client; extern int usb_disabled(void); -static struct clk *usb_pll_clk; -static struct clk *usb_dev_clk; -static struct clk *usb_otg_clk; +static struct clk *usb_host_clk; static void isp1301_configure_lpc32xx(void) { @@ -110,9 +98,6 @@ static void isp1301_configure_lpc32xx(void) i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0); - /* Enable usb_need_clk clock after transceiver is initialized */ - __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); - printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n", i2c_smbus_read_word_data(isp1301_i2c_client, 0x00)); printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n", @@ -185,59 +170,20 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) goto fail_disable; } - /* Enable AHB slave USB clock, needed for further USB clock control */ - __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL); - - /* Enable USB PLL */ - usb_pll_clk = devm_clk_get(&pdev->dev, "ck_pll5"); - if (IS_ERR(usb_pll_clk)) { - dev_err(&pdev->dev, "failed to acquire USB PLL\n"); - ret = PTR_ERR(usb_pll_clk); + /* Enable USB host clock */ + usb_host_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(usb_host_clk)) { + dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n"); + ret = PTR_ERR(usb_host_clk); goto fail_disable; } - ret = clk_prepare_enable(usb_pll_clk); + ret = clk_prepare_enable(usb_host_clk); if (ret < 0) { - dev_err(&pdev->dev, "failed to start USB PLL\n"); + dev_err(&pdev->dev, "failed to start USB OHCI clock\n"); goto fail_disable; } - ret = clk_set_rate(usb_pll_clk, 48000); - if (ret < 0) { - dev_err(&pdev->dev, "failed to set USB clock rate\n"); - goto fail_rate; - } - - /* Enable USB device clock */ - usb_dev_clk = devm_clk_get(&pdev->dev, "ck_usbd"); - if (IS_ERR(usb_dev_clk)) { - dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); - ret = PTR_ERR(usb_dev_clk); - goto fail_rate; - } - - ret = clk_prepare_enable(usb_dev_clk); - if (ret < 0) { - dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto fail_rate; - } - - /* Enable USB otg clocks */ - usb_otg_clk = devm_clk_get(&pdev->dev, "ck_usb_otg"); - if (IS_ERR(usb_otg_clk)) { - dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n"); - ret = PTR_ERR(usb_otg_clk); - goto fail_otg; - } - - __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL); - - ret = clk_prepare_enable(usb_otg_clk); - if (ret < 0) { - dev_err(&pdev->dev, "failed to start USB DEV Clock\n"); - goto fail_otg; - } - isp1301_configure(); hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); @@ -276,11 +222,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev) fail_resource: usb_put_hcd(hcd); fail_hcd: - clk_disable_unprepare(usb_otg_clk); -fail_otg: - clk_disable_unprepare(usb_dev_clk); -fail_rate: - clk_disable_unprepare(usb_pll_clk); + clk_disable_unprepare(usb_host_clk); fail_disable: isp1301_i2c_client = NULL; return ret; @@ -293,9 +235,7 @@ static int ohci_hcd_nxp_remove(struct platform_device *pdev) usb_remove_hcd(hcd); ohci_nxp_stop_hc(); usb_put_hcd(hcd); - clk_disable_unprepare(usb_otg_clk); - clk_disable_unprepare(usb_dev_clk); - clk_disable_unprepare(usb_pll_clk); + clk_disable_unprepare(usb_host_clk); isp1301_i2c_client = NULL; return 0; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index bc462288cfb0..37f1725e7a46 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -735,10 +735,8 @@ extern void ohci_init_driver(struct hc_driver *drv, const struct ohci_driver_overrides *over); extern int ohci_restart(struct ohci_hcd *ohci); extern int ohci_setup(struct usb_hcd *hcd); -#ifdef CONFIG_PM extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup); extern int ohci_resume(struct usb_hcd *hcd, bool hibernated); -#endif extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength); extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf); diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index 9532f5aef71b..79959f17c38c 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -695,7 +695,6 @@ static int xhci_mtk_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_PM_SLEEP /* * if ip sleep fails, and all clocks are disabled, access register will hang * AHB bus, so stop polling roothubs to avoid regs access on bus suspend. @@ -703,7 +702,7 @@ static int xhci_mtk_remove(struct platform_device *dev) * to wake up system immediately after system suspend complete if ip sleep * fails, it is what we wanted. */ -static int xhci_mtk_suspend(struct device *dev) +static int __maybe_unused xhci_mtk_suspend(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); struct usb_hcd *hcd = mtk->hcd; @@ -722,7 +721,7 @@ static int xhci_mtk_suspend(struct device *dev) return 0; } -static int xhci_mtk_resume(struct device *dev) +static int __maybe_unused xhci_mtk_resume(struct device *dev) { struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); struct usb_hcd *hcd = mtk->hcd; @@ -744,10 +743,7 @@ static int xhci_mtk_resume(struct device *dev) static const struct dev_pm_ops xhci_mtk_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) }; -#define DEV_PM_OPS (&xhci_mtk_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif /* CONFIG_PM */ +#define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL #ifdef CONFIG_OF static const struct of_device_id mtk_xhci_of_match[] = { diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index d39d6bf1d090..5c15e9bc5f7a 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -110,7 +110,13 @@ static const struct of_device_id usb_xhci_of_match[] = { .compatible = "renesas,xhci-r8a7795", .data = &xhci_plat_renesas_rcar_gen3, }, { + .compatible = "renesas,rcar-gen2-xhci", + .data = &xhci_plat_renesas_rcar_gen2, + }, { + .compatible = "renesas,rcar-gen3-xhci", + .data = &xhci_plat_renesas_rcar_gen3, }, + {}, }; MODULE_DEVICE_TABLE(of, usb_xhci_of_match); #endif diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 4e38683c653c..5105397e62fc 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -257,9 +257,9 @@ static int idmouse_open(struct inode *inode, struct file *file) if (result) goto error; result = idmouse_create_image (dev); + usb_autopm_put_interface(interface); if (result) goto error; - usb_autopm_put_interface(interface); /* increment our usage count for the driver */ ++dev->open; diff --git a/drivers/usb/usbip/usbip_protocol.txt b/drivers/usb/usbip/usbip_protocol.txt deleted file mode 100644 index 16b6fe27284c..000000000000 --- a/drivers/usb/usbip/usbip_protocol.txt +++ /dev/null @@ -1,358 +0,0 @@ -PRELIMINARY DRAFT, MAY CONTAIN MISTAKES! -28 Jun 2011 - -The USB/IP protocol follows a server/client architecture. The server exports the -USB devices and the clients imports them. The device driver for the exported -USB device runs on the client machine. - -The client may ask for the list of the exported USB devices. To get the list the -client opens a TCP/IP connection towards the server, and sends an OP_REQ_DEVLIST -packet on top of the TCP/IP connection (so the actual OP_REQ_DEVLIST may be sent -in one or more pieces at the low level transport layer). The server sends back -the OP_REP_DEVLIST packet which lists the exported USB devices. Finally the -TCP/IP connection is closed. - - virtual host controller usb host - "client" "server" - (imports USB devices) (exports USB devices) - | | - | OP_REQ_DEVLIST | - | ----------------------------------------------> | - | | - | OP_REP_DEVLIST | - | <---------------------------------------------- | - | | - -Once the client knows the list of exported USB devices it may decide to use one -of them. First the client opens a TCP/IP connection towards the server and -sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the -import was successful the TCP/IP connection remains open and will be used -to transfer the URB traffic between the client and the server. The client may -send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and -USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the -server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively. - - virtual host controller usb host - "client" "server" - (imports USB devices) (exports USB devices) - | | - | OP_REQ_IMPORT | - | ----------------------------------------------> | - | | - | OP_REP_IMPORT | - | <---------------------------------------------- | - | | - | | - | USBIP_CMD_SUBMIT(seqnum = n) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = n) | - | <---------------------------------------------- | - | . | - | : | - | | - | USBIP_CMD_SUBMIT(seqnum = m) | - | ----------------------------------------------> | - | | - | USBIP_CMD_SUBMIT(seqnum = m+1) | - | ----------------------------------------------> | - | | - | USBIP_CMD_SUBMIT(seqnum = m+2) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = m) | - | <---------------------------------------------- | - | | - | USBIP_CMD_SUBMIT(seqnum = m+3) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = m+1) | - | <---------------------------------------------- | - | | - | USBIP_CMD_SUBMIT(seqnum = m+4) | - | ----------------------------------------------> | - | | - | USBIP_RET_SUBMIT(seqnum = m+2) | - | <---------------------------------------------- | - | . | - | : | - | | - | USBIP_CMD_UNLINK | - | ----------------------------------------------> | - | | - | USBIP_RET_UNLINK | - | <---------------------------------------------- | - | | - -The fields are in network (big endian) byte order meaning that the most significant -byte (MSB) is stored at the lowest address. - - -OP_REQ_DEVLIST: Retrieve the list of exported USB devices. - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 ------------+--------+------------+--------------------------------------------------- - 2 | 2 | 0x8005 | Command code: Retrieve the list of exported USB - | | | devices. ------------+--------+------------+--------------------------------------------------- - 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 - -OP_REP_DEVLIST: Reply with the list of exported USB devices. - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0. ------------+--------+------------+--------------------------------------------------- - 2 | 2 | 0x0005 | Reply code: The list of exported USB devices. ------------+--------+------------+--------------------------------------------------- - 4 | 4 | 0x00000000 | Status: 0 for OK ------------+--------+------------+--------------------------------------------------- - 8 | 4 | n | Number of exported devices: 0 means no exported - | | | devices. ------------+--------+------------+--------------------------------------------------- - 0x0C | | | From now on the exported n devices are described, - | | | if any. If no devices are exported the message - | | | ends with the previous "number of exported - | | | devices" field. ------------+--------+------------+--------------------------------------------------- - | 256 | | path: Path of the device on the host exporting the - | | | USB device, string closed with zero byte, e.g. - | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" - | | | The unused bytes shall be filled with zero - | | | bytes. ------------+--------+------------+--------------------------------------------------- - 0x10C | 32 | | busid: Bus ID of the exported device, string - | | | closed with zero byte, e.g. "3-2". The unused - | | | bytes shall be filled with zero bytes. ------------+--------+------------+--------------------------------------------------- - 0x12C | 4 | | busnum ------------+--------+------------+--------------------------------------------------- - 0x130 | 4 | | devnum ------------+--------+------------+--------------------------------------------------- - 0x134 | 4 | | speed ------------+--------+------------+--------------------------------------------------- - 0x138 | 2 | | idVendor ------------+--------+------------+--------------------------------------------------- - 0x13A | 2 | | idProduct ------------+--------+------------+--------------------------------------------------- - 0x13C | 2 | | bcdDevice ------------+--------+------------+--------------------------------------------------- - 0x13E | 1 | | bDeviceClass ------------+--------+------------+--------------------------------------------------- - 0x13F | 1 | | bDeviceSubClass ------------+--------+------------+--------------------------------------------------- - 0x140 | 1 | | bDeviceProtocol ------------+--------+------------+--------------------------------------------------- - 0x141 | 1 | | bConfigurationValue ------------+--------+------------+--------------------------------------------------- - 0x142 | 1 | | bNumConfigurations ------------+--------+------------+--------------------------------------------------- - 0x143 | 1 | | bNumInterfaces ------------+--------+------------+--------------------------------------------------- - 0x144 | | m_0 | From now on each interface is described, all - | | | together bNumInterfaces times, with the - | | | the following 4 fields: ------------+--------+------------+--------------------------------------------------- - | 1 | | bInterfaceClass ------------+--------+------------+--------------------------------------------------- - 0x145 | 1 | | bInterfaceSubClass ------------+--------+------------+--------------------------------------------------- - 0x146 | 1 | | bInterfaceProtocol ------------+--------+------------+--------------------------------------------------- - 0x147 | 1 | | padding byte for alignment, shall be set to zero ------------+--------+------------+--------------------------------------------------- - 0xC + | | | The second exported USB device starts at i=1 - i*0x138 + | | | with the busid field. - m_(i-1)*4 | | | - -OP_REQ_IMPORT: Request to import (attach) a remote USB device. - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 ------------+--------+------------+--------------------------------------------------- - 2 | 2 | 0x8003 | Command code: import a remote USB device. ------------+--------+------------+--------------------------------------------------- - 4 | 4 | 0x00000000 | Status: unused, shall be set to 0 ------------+--------+------------+--------------------------------------------------- - 8 | 32 | | busid: the busid of the exported device on the - | | | remote host. The possible values are taken - | | | from the message field OP_REP_DEVLIST.busid. - | | | A string closed with zero, the unused bytes - | | | shall be filled with zeros. ------------+--------+------------+--------------------------------------------------- - -OP_REP_IMPORT: Reply to import (attach) a remote USB device. - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 2 | 0x0100 | Binary-coded decimal USBIP version number: v1.0.0 ------------+--------+------------+--------------------------------------------------- - 2 | 2 | 0x0003 | Reply code: Reply to import. ------------+--------+------------+--------------------------------------------------- - 4 | 4 | 0x00000000 | Status: 0 for OK - | | | 1 for error ------------+--------+------------+--------------------------------------------------- - 8 | | | From now on comes the details of the imported - | | | device, if the previous status field was OK (0), - | | | otherwise the reply ends with the status field. ------------+--------+------------+--------------------------------------------------- - | 256 | | path: Path of the device on the host exporting the - | | | USB device, string closed with zero byte, e.g. - | | | "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" - | | | The unused bytes shall be filled with zero - | | | bytes. ------------+--------+------------+--------------------------------------------------- - 0x108 | 32 | | busid: Bus ID of the exported device, string - | | | closed with zero byte, e.g. "3-2". The unused - | | | bytes shall be filled with zero bytes. ------------+--------+------------+--------------------------------------------------- - 0x128 | 4 | | busnum ------------+--------+------------+--------------------------------------------------- - 0x12C | 4 | | devnum ------------+--------+------------+--------------------------------------------------- - 0x130 | 4 | | speed ------------+--------+------------+--------------------------------------------------- - 0x134 | 2 | | idVendor ------------+--------+------------+--------------------------------------------------- - 0x136 | 2 | | idProduct ------------+--------+------------+--------------------------------------------------- - 0x138 | 2 | | bcdDevice ------------+--------+------------+--------------------------------------------------- - 0x139 | 1 | | bDeviceClass ------------+--------+------------+--------------------------------------------------- - 0x13A | 1 | | bDeviceSubClass ------------+--------+------------+--------------------------------------------------- - 0x13B | 1 | | bDeviceProtocol ------------+--------+------------+--------------------------------------------------- - 0x13C | 1 | | bConfigurationValue ------------+--------+------------+--------------------------------------------------- - 0x13D | 1 | | bNumConfigurations ------------+--------+------------+--------------------------------------------------- - 0x13E | 1 | | bNumInterfaces - -USBIP_CMD_SUBMIT: Submit an URB - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 4 | 0x00000001 | command: Submit an URB ------------+--------+------------+--------------------------------------------------- - 4 | 4 | | seqnum: the sequence number of the URB to submit ------------+--------+------------+--------------------------------------------------- - 8 | 4 | | devid ------------+--------+------------+--------------------------------------------------- - 0xC | 4 | | direction: 0: USBIP_DIR_OUT - | | | 1: USBIP_DIR_IN ------------+--------+------------+--------------------------------------------------- - 0x10 | 4 | | ep: endpoint number, possible values are: 0...15 ------------+--------+------------+--------------------------------------------------- - 0x14 | 4 | | transfer_flags: possible values depend on the - | | | URB transfer type, see below ------------+--------+------------+--------------------------------------------------- - 0x18 | 4 | | transfer_buffer_length ------------+--------+------------+--------------------------------------------------- - 0x1C | 4 | | start_frame: specify the selected frame to - | | | transmit an ISO frame, ignored if URB_ISO_ASAP - | | | is specified at transfer_flags ------------+--------+------------+--------------------------------------------------- - 0x20 | 4 | | number_of_packets: number of ISO packets ------------+--------+------------+--------------------------------------------------- - 0x24 | 4 | | interval: maximum time for the request on the - | | | server-side host controller ------------+--------+------------+--------------------------------------------------- - 0x28 | 8 | | setup: data bytes for USB setup, filled with - | | | zeros if not used ------------+--------+------------+--------------------------------------------------- - 0x30 | | | URB data. For ISO transfers the padding between - | | | each ISO packets is not transmitted. - - - Allowed transfer_flags | value | control | interrupt | bulk | isochronous - -------------------------+------------+---------+-----------+----------+------------- - URB_SHORT_NOT_OK | 0x00000001 | only in | only in | only in | no - URB_ISO_ASAP | 0x00000002 | no | no | no | yes - URB_NO_TRANSFER_DMA_MAP | 0x00000004 | yes | yes | yes | yes - URB_NO_FSBR | 0x00000020 | yes | no | no | no - URB_ZERO_PACKET | 0x00000040 | no | no | only out | no - URB_NO_INTERRUPT | 0x00000080 | yes | yes | yes | yes - URB_FREE_BUFFER | 0x00000100 | yes | yes | yes | yes - URB_DIR_MASK | 0x00000200 | yes | yes | yes | yes - - -USBIP_RET_SUBMIT: Reply for submitting an URB - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 4 | 0x00000003 | command ------------+--------+------------+--------------------------------------------------- - 4 | 4 | | seqnum: URB sequence number ------------+--------+------------+--------------------------------------------------- - 8 | 4 | | devid ------------+--------+------------+--------------------------------------------------- - 0xC | 4 | | direction: 0: USBIP_DIR_OUT - | | | 1: USBIP_DIR_IN ------------+--------+------------+--------------------------------------------------- - 0x10 | 4 | | ep: endpoint number ------------+--------+------------+--------------------------------------------------- - 0x14 | 4 | | status: zero for successful URB transaction, - | | | otherwise some kind of error happened. ------------+--------+------------+--------------------------------------------------- - 0x18 | 4 | n | actual_length: number of URB data bytes ------------+--------+------------+--------------------------------------------------- - 0x1C | 4 | | start_frame: for an ISO frame the actually - | | | selected frame for transmit. ------------+--------+------------+--------------------------------------------------- - 0x20 | 4 | | number_of_packets ------------+--------+------------+--------------------------------------------------- - 0x24 | 4 | | error_count ------------+--------+------------+--------------------------------------------------- - 0x28 | 8 | | setup: data bytes for USB setup, filled with - | | | zeros if not used ------------+--------+------------+--------------------------------------------------- - 0x30 | n | | URB data bytes. For ISO transfers the padding - | | | between each ISO packets is not transmitted. - -USBIP_CMD_UNLINK: Unlink an URB - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 4 | 0x00000002 | command: URB unlink command ------------+--------+------------+--------------------------------------------------- - 4 | 4 | | seqnum: URB sequence number to unlink: FIXME: is this so? ------------+--------+------------+--------------------------------------------------- - 8 | 4 | | devid ------------+--------+------------+--------------------------------------------------- - 0xC | 4 | | direction: 0: USBIP_DIR_OUT - | | | 1: USBIP_DIR_IN ------------+--------+------------+--------------------------------------------------- - 0x10 | 4 | | ep: endpoint number: zero ------------+--------+------------+--------------------------------------------------- - 0x14 | 4 | | seqnum: the URB sequence number given previously - | | | at USBIP_CMD_SUBMIT.seqnum field ------------+--------+------------+--------------------------------------------------- - 0x30 | n | | URB data bytes. For ISO transfers the padding - | | | between each ISO packets is not transmitted. - -USBIP_RET_UNLINK: Reply for URB unlink - - Offset | Length | Value | Description ------------+--------+------------+--------------------------------------------------- - 0 | 4 | 0x00000004 | command: reply for the URB unlink command ------------+--------+------------+--------------------------------------------------- - 4 | 4 | | seqnum: the unlinked URB sequence number ------------+--------+------------+--------------------------------------------------- - 8 | 4 | | devid ------------+--------+------------+--------------------------------------------------- - 0xC | 4 | | direction: 0: USBIP_DIR_OUT - | | | 1: USBIP_DIR_IN ------------+--------+------------+--------------------------------------------------- - 0x10 | 4 | | ep: endpoint number ------------+--------+------------+--------------------------------------------------- - 0x14 | 4 | | status: This is the value contained in the - | | | urb->status in the URB completition handler. - | | | FIXME: a better explanation needed. ------------+--------+------------+--------------------------------------------------- - 0x30 | n | | URB data bytes. For ISO transfers the padding - | | | between each ISO packets is not transmitted. |
