diff options
Diffstat (limited to 'drivers/video/s3c-fb.c')
| -rw-r--r-- | drivers/video/s3c-fb.c | 160 |
1 files changed, 85 insertions, 75 deletions
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index f3105160bf98..ea7b661e7229 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -47,7 +47,7 @@ #ifdef CONFIG_FB_S3C_DEBUG_REGWRITE #undef writel #define writel(v, r) do { \ - printk(KERN_DEBUG "%s: %08x => %p\n", __func__, (unsigned int)v, r); \ + pr_debug("%s: %08x => %p\n", __func__, (unsigned int)v, r); \ __raw_writel(v, r); \ } while (0) #endif /* FB_S3C_DEBUG_REGWRITE */ @@ -361,7 +361,7 @@ static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk) result = (unsigned int)tmp / 1000; dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n", - pixclk, clk, result, clk / result); + pixclk, clk, result, result ? clk / result : clk); return result; } @@ -495,7 +495,6 @@ static int s3c_fb_set_par(struct fb_info *info) u32 alpha = 0; u32 data; u32 pagewidth; - int clkdiv; dev_dbg(sfb->dev, "setting framebuffer parameters\n"); @@ -532,48 +531,9 @@ static int s3c_fb_set_par(struct fb_info *info) /* disable the window whilst we update it */ writel(0, regs + WINCON(win_no)); - /* use platform specified window as the basis for the lcd timings */ - - if (win_no == sfb->pdata->default_win) { - clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock); - - data = sfb->pdata->vidcon0; - data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); - - if (clkdiv > 1) - data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR; - else - data &= ~VIDCON0_CLKDIR; /* 1:1 clock */ - - /* write the timing data to the panel */ - - if (sfb->variant.is_2443) - data |= (1 << 5); - - writel(data, regs + VIDCON0); - + if (!sfb->output_on) s3c_fb_enable(sfb, 1); - data = VIDTCON0_VBPD(var->upper_margin - 1) | - VIDTCON0_VFPD(var->lower_margin - 1) | - VIDTCON0_VSPW(var->vsync_len - 1); - - writel(data, regs + sfb->variant.vidtcon); - - data = VIDTCON1_HBPD(var->left_margin - 1) | - VIDTCON1_HFPD(var->right_margin - 1) | - VIDTCON1_HSPW(var->hsync_len - 1); - - /* VIDTCON1 */ - writel(data, regs + sfb->variant.vidtcon + 4); - - data = VIDTCON2_LINEVAL(var->yres - 1) | - VIDTCON2_HOZVAL(var->xres - 1) | - VIDTCON2_LINEVAL_E(var->yres - 1) | - VIDTCON2_HOZVAL_E(var->xres - 1); - writel(data, regs + sfb->variant.vidtcon + 8); - } - /* write the buffer address */ /* start and end registers stride is 8 */ @@ -839,6 +799,7 @@ static int s3c_fb_blank(int blank_mode, struct fb_info *info) struct s3c_fb *sfb = win->parent; unsigned int index = win->index; u32 wincon; + u32 output_on = sfb->output_on; dev_dbg(sfb->dev, "blank mode %d\n", blank_mode); @@ -877,34 +838,18 @@ static int s3c_fb_blank(int blank_mode, struct fb_info *info) shadow_protect_win(win, 1); writel(wincon, sfb->regs + sfb->variant.wincon + (index * 4)); - shadow_protect_win(win, 0); /* Check the enabled state to see if we need to be running the * main LCD interface, as if there are no active windows then * it is highly likely that we also do not need to output * anything. */ - - /* We could do something like the following code, but the current - * system of using framebuffer events means that we cannot make - * the distinction between just window 0 being inactive and all - * the windows being down. - * - * s3c_fb_enable(sfb, sfb->enabled ? 1 : 0); - */ - - /* we're stuck with this until we can do something about overriding - * the power control using the blanking event for a single fb. - */ - if (index == sfb->pdata->default_win) { - shadow_protect_win(win, 1); - s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0); - shadow_protect_win(win, 0); - } + s3c_fb_enable(sfb, sfb->enabled ? 1 : 0); + shadow_protect_win(win, 0); pm_runtime_put_sync(sfb->dev); - return 0; + return output_on == sfb->output_on; } /** @@ -1111,7 +1056,7 @@ static struct fb_ops s3c_fb_ops = { * * Calculate the pixel clock when none has been given through platform data. */ -static void __devinit s3c_fb_missing_pixclock(struct fb_videomode *mode) +static void s3c_fb_missing_pixclock(struct fb_videomode *mode) { u64 pixclk = 1000000000000ULL; u32 div; @@ -1144,11 +1089,11 @@ static int __devinit s3c_fb_alloc_memory(struct s3c_fb *sfb, dev_dbg(sfb->dev, "allocating memory for display\n"); - real_size = windata->win_mode.xres * windata->win_mode.yres; + real_size = windata->xres * windata->yres; virt_size = windata->virtual_x * windata->virtual_y; dev_dbg(sfb->dev, "real_size=%u (%u.%u), virt_size=%u (%u.%u)\n", - real_size, windata->win_mode.xres, windata->win_mode.yres, + real_size, windata->xres, windata->yres, virt_size, windata->virtual_x, windata->virtual_y); size = (real_size > virt_size) ? real_size : virt_size; @@ -1230,7 +1175,7 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, struct s3c_fb_win **res) { struct fb_var_screeninfo *var; - struct fb_videomode *initmode; + struct fb_videomode initmode; struct s3c_fb_pd_win *windata; struct s3c_fb_win *win; struct fb_info *fbinfo; @@ -1251,11 +1196,11 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, } windata = sfb->pdata->win[win_no]; - initmode = &windata->win_mode; + initmode = *sfb->pdata->vtiming; WARN_ON(windata->max_bpp == 0); - WARN_ON(windata->win_mode.xres == 0); - WARN_ON(windata->win_mode.yres == 0); + WARN_ON(windata->xres == 0); + WARN_ON(windata->yres == 0); win = fbinfo->par; *res = win; @@ -1294,7 +1239,9 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, } /* setup the initial video mode from the window */ - fb_videomode_to_var(&fbinfo->var, initmode); + initmode.xres = windata->xres; + initmode.yres = windata->yres; + fb_videomode_to_var(&fbinfo->var, &initmode); fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; fbinfo->fix.accel = FB_ACCEL_NONE; @@ -1339,6 +1286,53 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no, } /** + * s3c_fb_set_rgb_timing() - set video timing for rgb interface. + * @sfb: The base resources for the hardware. + * + * Set horizontal and vertical lcd rgb interface timing. + */ +static void s3c_fb_set_rgb_timing(struct s3c_fb *sfb) +{ + struct fb_videomode *vmode = sfb->pdata->vtiming; + void __iomem *regs = sfb->regs; + int clkdiv; + u32 data; + + if (!vmode->pixclock) + s3c_fb_missing_pixclock(vmode); + + clkdiv = s3c_fb_calc_pixclk(sfb, vmode->pixclock); + + data = sfb->pdata->vidcon0; + data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); + + if (clkdiv > 1) + data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR; + else + data &= ~VIDCON0_CLKDIR; /* 1:1 clock */ + + if (sfb->variant.is_2443) + data |= (1 << 5); + writel(data, regs + VIDCON0); + + data = VIDTCON0_VBPD(vmode->upper_margin - 1) | + VIDTCON0_VFPD(vmode->lower_margin - 1) | + VIDTCON0_VSPW(vmode->vsync_len - 1); + writel(data, regs + sfb->variant.vidtcon); + + data = VIDTCON1_HBPD(vmode->left_margin - 1) | + VIDTCON1_HFPD(vmode->right_margin - 1) | + VIDTCON1_HSPW(vmode->hsync_len - 1); + writel(data, regs + sfb->variant.vidtcon + 4); + + data = VIDTCON2_LINEVAL(vmode->yres - 1) | + VIDTCON2_HOZVAL(vmode->xres - 1) | + VIDTCON2_LINEVAL_E(vmode->yres - 1) | + VIDTCON2_HOZVAL_E(vmode->xres - 1); + writel(data, regs + sfb->variant.vidtcon + 8); +} + +/** * s3c_fb_clear_win() - clear hardware window registers. * @sfb: The base resources for the hardware. * @win: The window to process. @@ -1354,8 +1348,14 @@ static void s3c_fb_clear_win(struct s3c_fb *sfb, int win) writel(0, regs + VIDOSD_A(win, sfb->variant)); writel(0, regs + VIDOSD_B(win, sfb->variant)); writel(0, regs + VIDOSD_C(win, sfb->variant)); - reg = readl(regs + SHADOWCON); - writel(reg & ~SHADOWCON_WINx_PROTECT(win), regs + SHADOWCON); + + if (sfb->variant.has_shadowcon) { + reg = readl(sfb->regs + SHADOWCON); + reg &= ~(SHADOWCON_WINx_PROTECT(win) | + SHADOWCON_CHx_ENABLE(win) | + SHADOWCON_CHx_LOCAL_ENABLE(win)); + writel(reg, sfb->regs + SHADOWCON); + } } static int __devinit s3c_fb_probe(struct platform_device *pdev) @@ -1481,15 +1481,14 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev) writel(0xffffff, regs + WKEYCON1); } + s3c_fb_set_rgb_timing(sfb); + /* we have the register setup, start allocating framebuffers */ for (win = 0; win < fbdrv->variant.nr_windows; win++) { if (!pd->win[win]) continue; - if (!pd->win[win]->win_mode.pixclock) - s3c_fb_missing_pixclock(&pd->win[win]->win_mode); - ret = s3c_fb_probe_win(sfb, win, fbdrv->win[win], &sfb->windows[win]); if (ret < 0) { @@ -1564,6 +1563,8 @@ static int s3c_fb_suspend(struct device *dev) struct s3c_fb_win *win; int win_no; + pm_runtime_get_sync(sfb->dev); + for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) { win = sfb->windows[win_no]; if (!win) @@ -1577,6 +1578,9 @@ static int s3c_fb_suspend(struct device *dev) clk_disable(sfb->lcd_clk); clk_disable(sfb->bus_clk); + + pm_runtime_put_sync(sfb->dev); + return 0; } @@ -1589,6 +1593,8 @@ static int s3c_fb_resume(struct device *dev) int win_no; u32 reg; + pm_runtime_get_sync(sfb->dev); + clk_enable(sfb->bus_clk); if (!sfb->variant.has_clksel) @@ -1623,6 +1629,8 @@ static int s3c_fb_resume(struct device *dev) shadow_protect_win(win, 0); } + s3c_fb_set_rgb_timing(sfb); + /* restore framebuffers */ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) { win = sfb->windows[win_no]; @@ -1633,6 +1641,8 @@ static int s3c_fb_resume(struct device *dev) s3c_fb_set_par(win->fbinfo); } + pm_runtime_put_sync(sfb->dev); + return 0; } #endif |
