summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/atm/speedtch.c2
-rw-r--r--drivers/usb/atm/ueagle-atm.c52
-rw-r--r--drivers/usb/atm/usbatm.c8
-rw-r--r--drivers/usb/core/Kconfig7
-rw-r--r--drivers/usb/core/hcd-pci.c7
-rw-r--r--drivers/usb/core/hcd.c13
-rw-r--r--drivers/usb/core/hub.c31
-rw-r--r--drivers/usb/core/usb.c2
-rw-r--r--drivers/usb/gadget/Kconfig4
-rw-r--r--drivers/usb/gadget/at91_udc.c4
-rw-r--r--drivers/usb/gadget/ether.c6
-rw-r--r--drivers/usb/gadget/file_storage.c38
-rw-r--r--drivers/usb/gadget/gadget_chips.h6
-rw-r--r--drivers/usb/gadget/inode.c25
-rw-r--r--drivers/usb/gadget/net2280.c108
-rw-r--r--drivers/usb/gadget/net2280.h415
-rw-r--r--drivers/usb/gadget/zero.c7
-rw-r--r--drivers/usb/host/ehci-pci.c2
-rw-r--r--drivers/usb/host/ohci-at91.c35
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/host/ohci-pci.c2
-rw-r--r--drivers/usb/host/ohci-s3c2410.c41
-rw-r--r--drivers/usb/host/pci-quirks.c1
-rw-r--r--drivers/usb/host/pci-quirks.h7
-rw-r--r--drivers/usb/host/uhci-hcd.c9
-rw-r--r--drivers/usb/host/uhci-hcd.h1
-rw-r--r--drivers/usb/host/uhci-hub.c18
-rw-r--r--drivers/usb/input/Kconfig56
-rw-r--r--drivers/usb/input/Makefile1
-rw-r--r--drivers/usb/input/hid-core.c18
-rw-r--r--drivers/usb/input/hid-ff.c6
-rw-r--r--drivers/usb/input/hid.h5
-rw-r--r--drivers/usb/input/hiddev.c1
-rw-r--r--drivers/usb/input/keyspan_remote.c2
-rw-r--r--drivers/usb/input/usbtouchscreen.c605
-rw-r--r--drivers/usb/input/wacom.c136
-rw-r--r--drivers/usb/misc/emi26.c4
-rw-r--r--drivers/usb/misc/emi62.c4
-rw-r--r--drivers/usb/misc/usbtest.c13
-rw-r--r--drivers/usb/net/asix.c327
-rw-r--r--drivers/usb/net/pegasus.c22
-rw-r--r--drivers/usb/net/rndis_host.c28
-rw-r--r--drivers/usb/serial/Kconfig19
-rw-r--r--drivers/usb/serial/Makefile2
-rw-r--r--drivers/usb/serial/airprime.c1
-rw-r--r--drivers/usb/serial/ark3116.c465
-rw-r--r--drivers/usb/serial/console.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c7
-rw-r--r--drivers/usb/serial/ftdi_sio.h37
-rw-r--r--drivers/usb/serial/funsoft.c65
-rw-r--r--drivers/usb/serial/generic.c1
-rw-r--r--drivers/usb/serial/omninet.c12
-rw-r--r--drivers/usb/serial/pl2303.c2
-rw-r--r--drivers/usb/serial/pl2303.h5
-rw-r--r--drivers/usb/serial/usb-serial.c31
-rw-r--r--drivers/usb/serial/usb-serial.h6
-rw-r--r--drivers/usb/serial/whiteheat.c1
-rw-r--r--drivers/usb/storage/Kconfig3
-rw-r--r--drivers/usb/storage/unusual_devs.h9
59 files changed, 1897 insertions, 852 deletions
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 7860c8a5800d..956b7a1e8af9 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch";
#define RESUBMIT_DELAY 1000 /* milliseconds */
#define DEFAULT_BULK_ALTSETTING 1
-#define DEFAULT_ISOC_ALTSETTING 2
+#define DEFAULT_ISOC_ALTSETTING 3
#define DEFAULT_DL_512_FIRST 0
#define DEFAULT_ENABLE_ISOC 0
#define DEFAULT_SW_BUFFERING 0
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 830d2c982670..b38990adf1cd 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -68,7 +68,7 @@
#include "usbatm.h"
-#define EAGLEUSBVERSION "ueagle 1.2"
+#define EAGLEUSBVERSION "ueagle 1.3"
/*
@@ -243,7 +243,7 @@ enum {
#define BULK_TIMEOUT 300
#define CTRL_TIMEOUT 1000
-#define ACK_TIMEOUT msecs_to_jiffies(1500)
+#define ACK_TIMEOUT msecs_to_jiffies(3000)
#define UEA_INTR_IFACE_NO 0
#define UEA_US_IFACE_NO 1
@@ -314,6 +314,10 @@ struct cmv {
((d) & 0xff) << 16 | \
((a) & 0xff) << 8 | \
((b) & 0xff))
+#define GETSA1(a) ((a >> 8) & 0xff)
+#define GETSA2(a) (a & 0xff)
+#define GETSA3(a) ((a >> 24) & 0xff)
+#define GETSA4(a) ((a >> 16) & 0xff)
#define SA_CNTL MAKESA('C', 'N', 'T', 'L')
#define SA_DIAG MAKESA('D', 'I', 'A', 'G')
@@ -728,11 +732,12 @@ bad2:
uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
return;
bad1:
- uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n",pageno);
+ uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
}
static inline void wake_up_cmv_ack(struct uea_softc *sc)
{
+ BUG_ON(sc->cmv_ack);
sc->cmv_ack = 1;
wake_up(&sc->cmv_ack_wait);
}
@@ -743,6 +748,9 @@ static inline int wait_cmv_ack(struct uea_softc *sc)
sc->cmv_ack, ACK_TIMEOUT);
sc->cmv_ack = 0;
+ uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
+ jiffies_to_msecs(ret));
+
if (ret < 0)
return ret;
@@ -791,6 +799,12 @@ static int uea_cmv(struct uea_softc *sc,
struct cmv cmv;
int ret;
+ uea_enters(INS_TO_USBDEV(sc));
+ uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
+ "offset : 0x%04x, data : 0x%08x\n",
+ FUNCTION_TYPE(function), FUNCTION_SUBTYPE(function),
+ GETSA1(address), GETSA2(address), GETSA3(address),
+ GETSA4(address), offset, data);
/* we send a request, but we expect a reply */
sc->cmv_function = function | 0x2;
sc->cmv_idx++;
@@ -808,7 +822,9 @@ static int uea_cmv(struct uea_softc *sc,
ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv);
if (ret < 0)
return ret;
- return wait_cmv_ack(sc);
+ ret = wait_cmv_ack(sc);
+ uea_leaves(INS_TO_USBDEV(sc));
+ return ret;
}
static inline int uea_read_cmv(struct uea_softc *sc,
@@ -922,7 +938,7 @@ static int uea_stat(struct uea_softc *sc)
* we check the status again in order to detect the failure earlier
*/
if (sc->stats.phy.flags) {
- uea_dbg(INS_TO_USBDEV(sc), "Stat flag = %d\n",
+ uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
sc->stats.phy.flags);
return 0;
}
@@ -1063,7 +1079,13 @@ static int uea_start_reset(struct uea_softc *sc)
uea_enters(INS_TO_USBDEV(sc));
uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
+ /* mask interrupt */
sc->booting = 1;
+ /* We need to set this here because, a ack timeout could have occured,
+ * but before we start the reboot, the ack occurs and set this to 1.
+ * So we will failed to wait Ready CMV.
+ */
+ sc->cmv_ack = 0;
UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST);
/* reset statistics */
@@ -1089,6 +1111,7 @@ static int uea_start_reset(struct uea_softc *sc)
msleep(1000);
sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY);
+ /* demask interrupt */
sc->booting = 0;
/* start loading DSP */
@@ -1101,6 +1124,8 @@ static int uea_start_reset(struct uea_softc *sc)
if (ret < 0)
return ret;
+ uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
+
/* Enter in R-IDLE (cmv) until instructed otherwise */
ret = uea_write_cmv(sc, SA_CNTL, 0, 1);
if (ret < 0)
@@ -1121,6 +1146,7 @@ static int uea_start_reset(struct uea_softc *sc)
}
/* Enter in R-ACT-REQ */
ret = uea_write_cmv(sc, SA_CNTL, 0, 2);
+ uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
out:
release_firmware(cmvs_fw);
sc->reset = 0;
@@ -1235,6 +1261,7 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) {
wake_up_cmv_ack(sc);
+ uea_leaves(INS_TO_USBDEV(sc));
return;
}
@@ -1249,6 +1276,7 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
sc->data = sc->data << 16 | sc->data >> 16;
wake_up_cmv_ack(sc);
+ uea_leaves(INS_TO_USBDEV(sc));
return;
bad2:
@@ -1256,12 +1284,14 @@ bad2:
"Function : %d, Subfunction : %d\n",
FUNCTION_TYPE(cmv->bFunction),
FUNCTION_SUBTYPE(cmv->bFunction));
+ uea_leaves(INS_TO_USBDEV(sc));
return;
bad1:
uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
"wPreamble %d, bDirection %d\n",
le16_to_cpu(cmv->wPreamble), cmv->bDirection);
+ uea_leaves(INS_TO_USBDEV(sc));
}
/*
@@ -1346,7 +1376,7 @@ static int uea_boot(struct uea_softc *sc)
if (ret < 0) {
uea_err(INS_TO_USBDEV(sc),
"urb submition failed with error %d\n", ret);
- goto err1;
+ goto err;
}
sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
@@ -1360,10 +1390,10 @@ static int uea_boot(struct uea_softc *sc)
err2:
usb_kill_urb(sc->urb_int);
-err1:
- kfree(intr);
err:
usb_free_urb(sc->urb_int);
+ sc->urb_int = NULL;
+ kfree(intr);
uea_leaves(INS_TO_USBDEV(sc));
return -ENOMEM;
}
@@ -1508,7 +1538,7 @@ static ssize_t read_##name(struct device *dev, \
int ret = -ENODEV; \
struct uea_softc *sc; \
\
- mutex_lock(&uea_mutex); \
+ mutex_lock(&uea_mutex); \
sc = dev_to_uea(dev); \
if (!sc) \
goto out; \
@@ -1516,7 +1546,7 @@ static ssize_t read_##name(struct device *dev, \
if (reset) \
sc->stats.phy.name = 0; \
out: \
- mutex_unlock(&uea_mutex); \
+ mutex_unlock(&uea_mutex); \
return ret; \
} \
\
@@ -1643,7 +1673,7 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
if (!sc) {
- uea_err(INS_TO_USBDEV(sc), "uea_init: not enough memory !\n");
+ uea_err(usb, "uea_init: not enough memory !\n");
return -ENOMEM;
}
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index c1211fc037d9..546249843b8e 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm";
#define UDSL_MAX_RCV_URBS 16
#define UDSL_MAX_SND_URBS 16
-#define UDSL_MAX_BUF_SIZE 64 * 1024 /* bytes */
+#define UDSL_MAX_BUF_SIZE 65536
#define UDSL_DEFAULT_RCV_URBS 4
#define UDSL_DEFAULT_SND_URBS 4
-#define UDSL_DEFAULT_RCV_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
-#define UDSL_DEFAULT_SND_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
+#define UDSL_DEFAULT_RCV_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */
#define ATM_CELL_HEADER (ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
module_param(snd_buf_bytes, uint, S_IRUGO);
MODULE_PARM_DESC(snd_buf_bytes,
"Size of the buffers used for transmission, in bytes (range: 1-"
- __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
+ __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index ff03184da403..a08787e253aa 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -99,4 +99,11 @@ config USB_OTG_WHITELIST
normal Linux-USB hosts do (other than the warning), and is
convenient for many stages of product development.
+config USB_OTG_BLACKLIST_HUB
+ bool "Disable external hubs"
+ depends on USB_OTG
+ help
+ If you say Y here, then Linux will refuse to enumerate
+ external hubs. OTG hosts are allowed to reduce hardware
+ and software costs by not supporting external hubs.
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 0d2193b69235..66b78404ab34 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -213,11 +213,9 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
if (hcd->driver->suspend) {
retval = hcd->driver->suspend(hcd, message);
- if (retval) {
- dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
- retval);
+ suspend_report_result(hcd->driver->suspend, retval);
+ if (retval)
goto done;
- }
}
synchronize_irq(dev->irq);
@@ -263,6 +261,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
* some device state (e.g. as part of clock reinit).
*/
retval = pci_set_power_state (dev, PCI_D3hot);
+ suspend_report_result(pci_set_power_state, retval);
if (retval == 0) {
int wake = device_can_wakeup(&hcd->self.root_hub->dev);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fbd938d4ea58..e2e00ba4e1e6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
USB_SPEED_FULL;
hcd->self.root_hub = rhdev;
+ /* wakeup flag init defaults to "everything works" for root hubs,
+ * but drivers can override it in reset() if needed, along with
+ * recording the overall controller's system wakeup capability.
+ */
+ device_init_wakeup(&rhdev->dev, 1);
+
/* "reset" is misnamed; its role is now one-time init. the controller
* should already have been reset (and boot firmware kicked off etc).
*/
@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
goto err_hcd_driver_setup;
}
- /* wakeup flag init is in transition; for now we can't rely on PCI to
- * initialize these bits properly, so we let reset() override it.
- * This init should _precede_ the reset() once PCI behaves.
- */
- device_init_wakeup(&rhdev->dev,
- device_can_wakeup(hcd->self.controller));
-
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
&& device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8e65f7a237e4..90b8d43c6b33 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -836,6 +836,13 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
+#ifdef CONFIG_USB_OTG_BLACKLIST_HUB
+ if (hdev->parent) {
+ dev_warn(&intf->dev, "ignoring external hub\n");
+ return -ENODEV;
+ }
+#endif
+
/* Some hubs have a subclass of 1, which AFAICT according to the */
/* specs is not defined, but it works */
if ((desc->desc.bInterfaceSubClass != 0) &&
@@ -1022,7 +1029,6 @@ void usb_set_device_state(struct usb_device *udev,
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
-EXPORT_SYMBOL(usb_set_device_state);
#ifdef CONFIG_PM
@@ -1162,19 +1168,9 @@ static inline const char *plural(int n)
static int choose_configuration(struct usb_device *udev)
{
int i;
- u16 devstatus;
- int bus_powered;
int num_configs;
struct usb_host_config *c, *best;
- /* If this fails, assume the device is bus-powered */
- devstatus = 0;
- usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
- le16_to_cpus(&devstatus);
- bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
- dev_dbg(&udev->dev, "device is %s-powered\n",
- bus_powered ? "bus" : "self");
-
best = NULL;
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
@@ -1191,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev)
* similar errors in their descriptors. If the next test
* were allowed to execute, such configurations would always
* be rejected and the devices would not work as expected.
+ * In the meantime, we run the risk of selecting a config
+ * that requires external power at a time when that power
+ * isn't available. It seems to be the lesser of two evils.
+ *
+ * Bugzilla #6448 reports a device that appears to crash
+ * when it receives a GET_DEVICE_STATUS request! We don't
+ * have any other way to tell whether a device is self-powered,
+ * but since we don't use that information anywhere but here,
+ * the call has been removed.
+ *
+ * Maybe the GET_DEVICE_STATUS call and the test below can
+ * be reinstated when device firmwares become more reliable.
+ * Don't hold your breath.
*/
#if 0
/* Rule out self-powered configs for a bus-powered device */
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index d7352aa73b5e..b7fdc1cd134a 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1194,7 +1194,6 @@ EXPORT_SYMBOL(usb_disabled);
EXPORT_SYMBOL_GPL(usb_get_intf);
EXPORT_SYMBOL_GPL(usb_put_intf);
-EXPORT_SYMBOL(usb_alloc_dev);
EXPORT_SYMBOL(usb_put_dev);
EXPORT_SYMBOL(usb_get_dev);
EXPORT_SYMBOL(usb_hub_tt_clear_buffer);
@@ -1208,7 +1207,6 @@ EXPORT_SYMBOL(usb_ifnum_to_if);
EXPORT_SYMBOL(usb_altnum_to_altsetting);
EXPORT_SYMBOL(usb_reset_device);
-EXPORT_SYMBOL(usb_disconnect);
EXPORT_SYMBOL(__usb_get_extra_descriptor);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index d80f71877d68..363b2ad74ae6 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -69,11 +69,11 @@ choice
often need board-specific hooks.
config USB_GADGET_NET2280
- boolean "NetChip 2280"
+ boolean "NetChip 228x"
depends on PCI
select USB_GADGET_DUALSPEED
help
- NetChip 2280 is a PCI based USB peripheral controller which
+ NetChip 2280 / 2282 is a PCI based USB peripheral controller which
supports both full and high speed USB 2.0 data transfers.
It has six configurable endpoints, as well as endpoint zero
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 865858cfd1c2..b8d0b7825bf3 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1709,7 +1709,7 @@ static int __devexit at91udc_remove(struct platform_device *dev)
}
#ifdef CONFIG_PM
-static int at91udc_suspend(struct platform_device *dev, u32 state, u32 level)
+static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg)
{
struct at91_udc *udc = platform_get_drvdata(dev);
@@ -1731,7 +1731,7 @@ static int at91udc_suspend(struct platform_device *dev, u32 state, u32 level)
return 0;
}
-static int at91udc_resume(struct platform_device *dev, u32 level)
+static int at91udc_resume(struct platform_device *dev)
{
struct at91_udc *udc = platform_get_drvdata(dev);
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index c3d8e5c5bf28..9c4422ac9de4 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2338,6 +2338,9 @@ autoconf_fail:
hs_subset_descriptors();
}
+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+ usb_gadget_set_selfpowered (gadget);
+
/* For now RNDIS is always a second config */
if (rndis)
device_desc.bNumConfigurations = 2;
@@ -2361,9 +2364,6 @@ autoconf_fail:
#endif
#endif /* DUALSPEED */
- device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
- usb_gadget_set_selfpowered (gadget);
-
if (gadget->is_otg) {
otg_descriptor.bmAttributes |= USB_OTG_HNP,
eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index cf3be299e353..6f887478b148 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -71,6 +71,12 @@
* requirement amounts to two 16K buffers, size configurable by a parameter.
* Support is included for both full-speed and high-speed operation.
*
+ * Note that the driver is slightly non-portable in that it assumes a
+ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
+ * interrupt-in endpoints. With most device controllers this isn't an
+ * issue, but there may be some with hardware restrictions that prevent
+ * a buffer from being used by more than one endpoint.
+ *
* Module options:
*
* file=filename[,filename...]
@@ -108,6 +114,14 @@
* setting are not allowed when the medium is loaded.
*
* This gadget driver is heavily based on "Gadget Zero" by David Brownell.
+ * The driver's SCSI command interface was based on the "Information
+ * technology - Small Computer System Interface - 2" document from
+ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
+ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception
+ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
+ * "Universal Serial Bus Mass Storage Class UFI Command Specification"
+ * document, Revision 1.0, December 14, 1998, available at
+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
*/
@@ -334,11 +348,9 @@ MODULE_LICENSE("Dual BSD/GPL");
#define MAX_LUNS 8
- /* Arggh! There should be a module_param_array_named macro! */
-static char *file[MAX_LUNS];
-static int ro[MAX_LUNS];
-
static struct {
+ char *file[MAX_LUNS];
+ int ro[MAX_LUNS];
int num_filenames;
int num_ros;
unsigned int nluns;
@@ -370,10 +382,11 @@ static struct {
};
-module_param_array(file, charp, &mod_data.num_filenames, S_IRUGO);
+module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
+ S_IRUGO);
MODULE_PARM_DESC(file, "names of backing files or devices");
-module_param_array(ro, bool, &mod_data.num_ros, S_IRUGO);
+module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
MODULE_PARM_DESC(ro, "true to force read-only");
module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
@@ -1795,6 +1808,7 @@ static int do_write(struct fsg_dev *fsg)
* the bulk-out maxpacket size */
bh->outreq->length = bh->bulk_out_intended_length =
amount;
+ bh->outreq->short_not_ok = 1;
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);
fsg->next_buffhd_to_fill = bh->next;
@@ -2398,6 +2412,7 @@ static int throw_away_data(struct fsg_dev *fsg)
* the bulk-out maxpacket size */
bh->outreq->length = bh->bulk_out_intended_length =
amount;
+ bh->outreq->short_not_ok = 1;
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);
fsg->next_buffhd_to_fill = bh->next;
@@ -3029,6 +3044,7 @@ static int get_next_command(struct fsg_dev *fsg)
/* Queue a request to read a Bulk-only CBW */
set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
+ bh->outreq->short_not_ok = 1;
start_transfer(fsg, fsg->bulk_out, bh->outreq,
&bh->outreq_busy, &bh->state);
@@ -3859,7 +3875,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
for (i = 0; i < fsg->nluns; ++i) {
curlun = &fsg->luns[i];
- curlun->ro = ro[i];
+ curlun->ro = mod_data.ro[i];
curlun->dev.parent = &gadget->dev;
curlun->dev.driver = &fsg_driver.driver;
dev_set_drvdata(&curlun->dev, fsg);
@@ -3876,8 +3892,9 @@ static int __init fsg_bind(struct usb_gadget *gadget)
kref_get(&fsg->ref);
}
- if (file[i] && *file[i]) {
- if ((rc = open_backing_file(curlun, file[i])) != 0)
+ if (mod_data.file[i] && *mod_data.file[i]) {
+ if ((rc = open_backing_file(curlun,
+ mod_data.file[i])) != 0)
goto out;
} else if (!mod_data.removable) {
ERROR(fsg, "no file given for LUN%d\n", i);
@@ -3953,6 +3970,9 @@ static int __init fsg_bind(struct usb_gadget *gadget)
for (i = 0; i < NUM_BUFFERS; ++i) {
struct fsg_buffhd *bh = &fsg->buffhds[i];
+ /* Allocate for the bulk-in endpoint. We assume that
+ * the buffer will also work with the bulk-out (and
+ * interrupt-in) endpoint. */
bh->buf = usb_ep_alloc_buffer(fsg->bulk_in, mod_data.buflen,
&bh->dma, GFP_KERNEL);
if (!bh->buf)
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index c4081407171f..aa80f0910720 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -100,9 +100,9 @@
#define gadget_is_musbhsfc(g) 0
#endif
-/* Mentor high speed "dual role" controller, peripheral mode */
-#ifdef CONFIG_USB_GADGET_MUSBHDRC
-#define gadget_is_musbhdrc(g) !strcmp("musbhdrc_udc", (g)->name)
+/* Mentor high speed "dual role" controller, in peripheral role */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+#define gadget_is_musbhdrc(g) !strcmp("musb_hdrc", (g)->name)
#else
#define gadget_is_musbhdrc(g) 0
#endif
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 3f618ce6998d..0eb010a3f5bc 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -810,7 +810,7 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
if (value == 0)
data->state = STATE_EP_ENABLED;
break;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_SPEED_HIGH:
/* fails if caller didn't provide that descriptor... */
value = usb_ep_enable (ep, &data->hs_desc);
@@ -982,7 +982,7 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
/* assume that was SET_CONFIGURATION */
if (dev->current_config) {
unsigned power;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
if (dev->gadget->speed == USB_SPEED_HIGH)
power = dev->hs_config->bMaxPower;
else
@@ -1262,7 +1262,7 @@ static struct file_operations ep0_io_operations = {
* Unrecognized ep0 requests may be handled in user space.
*/
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
static void make_qualifier (struct dev_data *dev)
{
struct usb_qualifier_descriptor qual;
@@ -1291,7 +1291,7 @@ static int
config_buf (struct dev_data *dev, u8 type, unsigned index)
{
int len;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
int hs;
#endif
@@ -1299,7 +1299,7 @@ config_buf (struct dev_data *dev, u8 type, unsigned index)
if (index > 0)
return -EINVAL;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
hs = (dev->gadget->speed == USB_SPEED_HIGH);
if (type == USB_DT_OTHER_SPEED_CONFIG)
hs = !hs;
@@ -1335,12 +1335,12 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
dev->state = STATE_CONNECTED;
dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) {
ERROR (dev, "no high speed config??\n");
return -EINVAL;
}
-#endif /* HIGHSPEED */
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
INFO (dev, "connected\n");
event = next_event (dev, GADGETFS_CONNECT);
@@ -1352,11 +1352,11 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
/* ... down_trylock (&data->lock) ... */
if (data->state != STATE_EP_DEFER_ENABLE)
continue;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
if (gadget->speed == USB_SPEED_HIGH)
value = usb_ep_enable (ep, &data->hs_desc);
else
-#endif /* HIGHSPEED */
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
value = usb_ep_enable (ep, &data->desc);
if (value) {
ERROR (dev, "deferred %s enable --> %d\n",
@@ -1391,7 +1391,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
value = min (w_length, (u16) sizeof *dev->dev);
req->buf = dev->dev;
break;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
case USB_DT_DEVICE_QUALIFIER:
if (!dev->hs_config)
break;
@@ -1428,7 +1428,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
// user mode expected to disable endpoints
} else {
u8 config, power;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
if (gadget->speed == USB_SPEED_HIGH) {
config = dev->hs_config->bConfigurationValue;
power = dev->hs_config->bMaxPower;
@@ -1614,6 +1614,7 @@ static int activate_ep_files (struct dev_data *dev)
data, &ep_config_operations,
&data->dentry);
if (!data->inode) {
+ usb_ep_free_request(ep, data->req);
kfree (data);
goto enomem;
}
@@ -1728,7 +1729,7 @@ gadgetfs_suspend (struct usb_gadget *gadget)
}
static struct usb_gadget_driver gadgetfs_driver = {
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
.speed = USB_SPEED_HIGH,
#else
.speed = USB_SPEED_FULL,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index fb73dc100535..0b9293493957 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -26,6 +26,8 @@
* Copyright (C) 2003 David Brownell
* Copyright (C) 2003-2005 PLX Technology, Inc.
*
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -71,8 +73,8 @@
#include <asm/unaligned.h>
-#define DRIVER_DESC "PLX NET2280 USB Peripheral Controller"
-#define DRIVER_VERSION "2005 Feb 03"
+#define DRIVER_DESC "PLX NET228x USB Peripheral Controller"
+#define DRIVER_VERSION "2005 Sept 27"
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
#define EP_DONTUSE 13 /* nonzero */
@@ -118,7 +120,7 @@ module_param (fifo_mode, ushort, 0644);
/* enable_suspend -- When enabled, the driver will respond to
* USB suspend requests by powering down the NET2280. Otherwise,
* USB suspend requests will be ignored. This is acceptible for
- * self-powered devices, and helps avoid some quirks.
+ * self-powered devices
*/
static int enable_suspend = 0;
@@ -223,6 +225,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
ep->is_in = (tmp & USB_DIR_IN) != 0;
if (!ep->is_in)
writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+ else if (dev->pdev->device != 0x2280) {
+ /* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */
+ writel ((1 << CLEAR_NAK_OUT_PACKETS)
+ | (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
+ }
writel (tmp, &ep->regs->ep_cfg);
@@ -232,8 +239,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
writel (tmp, &dev->regs->pciirqenb0);
tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
- | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
- | readl (&ep->regs->ep_irqenb);
+ | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);
+ if (dev->pdev->device == 0x2280)
+ tmp |= readl (&ep->regs->ep_irqenb);
writel (tmp, &ep->regs->ep_irqenb);
} else { /* dma, per-request */
tmp = (1 << (8 + ep->num)); /* completion */
@@ -314,10 +322,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
/* init to our chosen defaults, notably so that we NAK OUT
* packets until the driver queues a read (+note erratum 0112)
*/
- tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
+ if (!ep->is_in || ep->dev->pdev->device == 0x2280) {
+ tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
| (1 << SET_NAK_OUT_PACKETS)
| (1 << CLEAR_EP_HIDE_STATUS_PHASE)
| (1 << CLEAR_INTERRUPT_MODE);
+ } else {
+ /* added for 2282 */
+ tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+ | (1 << CLEAR_NAK_OUT_PACKETS)
+ | (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+ | (1 << CLEAR_INTERRUPT_MODE);
+ }
if (ep->num != 0) {
tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
@@ -326,14 +342,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
writel (tmp, &ep->regs->ep_rsp);
/* scrub most status bits, and flush any fifo state */
- writel ( (1 << TIMEOUT)
+ if (ep->dev->pdev->device == 0x2280)
+ tmp = (1 << FIFO_OVERFLOW)
+ | (1 << FIFO_UNDERFLOW);
+ else
+ tmp = 0;
+
+ writel (tmp | (1 << TIMEOUT)
| (1 << USB_STALL_SENT)
| (1 << USB_IN_NAK_SENT)
| (1 << USB_IN_ACK_RCVD)
| (1 << USB_OUT_PING_NAK_SENT)
| (1 << USB_OUT_ACK_SENT)
- | (1 << FIFO_OVERFLOW)
- | (1 << FIFO_UNDERFLOW)
| (1 << FIFO_FLUSH)
| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
@@ -718,7 +738,7 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid)
*/
if (ep->is_in)
dmacount |= (1 << DMA_DIRECTION);
- else if ((dmacount % ep->ep.maxpacket) != 0)
+ if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)
dmacount |= (1 << END_OF_CHAIN);
req->valid = valid;
@@ -760,9 +780,12 @@ static inline void stop_dma (struct net2280_dma_regs __iomem *dma)
static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
{
struct net2280_dma_regs __iomem *dma = ep->dma;
+ unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION);
+
+ if (ep->dev->pdev->device != 0x2280)
+ tmp |= (1 << END_OF_CHAIN);
- writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),
- &dma->dmacount);
+ writel (tmp, &dma->dmacount);
writel (readl (&dma->dmastat), &dma->dmastat);
writel (td_dma, &dma->dmadesc);
@@ -2110,7 +2133,11 @@ static void handle_ep_small (struct net2280_ep *ep)
VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",
ep->ep.name, t, req ? &req->req : 0);
#endif
- writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+ if (!ep->is_in || ep->dev->pdev->device == 0x2280)
+ writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+ else
+ /* Added for 2282 */
+ writel (t, &ep->regs->ep_stat);
/* for ep0, monitor token irqs to catch data stage length errors
* and to synchronize on status.
@@ -2139,7 +2166,7 @@ static void handle_ep_small (struct net2280_ep *ep)
ep->stopped = 1;
set_halt (ep);
mode = 2;
- } else if (!req && ep->stopped)
+ } else if (!req && !ep->stopped)
write_fifo (ep, NULL);
}
} else {
@@ -2214,7 +2241,8 @@ static void handle_ep_small (struct net2280_ep *ep)
if (likely (req)) {
req->td->dmacount = 0;
t = readl (&ep->regs->ep_avail);
- dma_done (ep, req, count, t);
+ dma_done (ep, req, count,
+ (ep->out_overflow || t) ? -EOVERFLOW : 0);
}
/* also flush to prevent erratum 0106 trouble */
@@ -2252,9 +2280,7 @@ static void handle_ep_small (struct net2280_ep *ep)
/* if we wrote it all, we're usually done */
if (req->req.actual == req->req.length) {
if (ep->num == 0) {
- /* wait for control status */
- if (mode != 2)
- req = NULL;
+ /* send zlps until the status stage */
} else if (!req->req.zero || len != ep->ep.maxpacket)
mode = 2;
}
@@ -2337,7 +2363,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
u32 raw [2];
struct usb_ctrlrequest r;
} u;
- int tmp = 0;
+ int tmp;
struct net2280_request *req;
if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
@@ -2364,14 +2390,19 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
}
ep->stopped = 0;
dev->protocol_stall = 0;
- writel ( (1 << TIMEOUT)
+
+ if (ep->dev->pdev->device == 0x2280)
+ tmp = (1 << FIFO_OVERFLOW)
+ | (1 << FIFO_UNDERFLOW);
+ else
+ tmp = 0;
+
+ writel (tmp | (1 << TIMEOUT)
| (1 << USB_STALL_SENT)
| (1 << USB_IN_NAK_SENT)
| (1 << USB_IN_ACK_RCVD)
| (1 << USB_OUT_PING_NAK_SENT)
| (1 << USB_OUT_ACK_SENT)
- | (1 << FIFO_OVERFLOW)
- | (1 << FIFO_UNDERFLOW)
| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
@@ -2385,6 +2416,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
cpu_to_le32s (&u.raw [0]);
cpu_to_le32s (&u.raw [1]);
+ tmp = 0;
+
#define w_value le16_to_cpup (&u.r.wValue)
#define w_index le16_to_cpup (&u.r.wIndex)
#define w_length le16_to_cpup (&u.r.wLength)
@@ -2594,10 +2627,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
writel (stat, &dev->regs->irqstat1);
/* some status we can just ignore */
- stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
- | (1 << SUSPEND_REQUEST_INTERRUPT)
- | (1 << RESUME_INTERRUPT)
- | (1 << SOF_INTERRUPT));
+ if (dev->pdev->device == 0x2280)
+ stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+ | (1 << SUSPEND_REQUEST_INTERRUPT)
+ | (1 << RESUME_INTERRUPT)
+ | (1 << SOF_INTERRUPT));
+ else
+ stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+ | (1 << RESUME_INTERRUPT)
+ | (1 << SOF_DOWN_INTERRUPT)
+ | (1 << SOF_INTERRUPT));
+
if (!stat)
return;
// DEBUG (dev, "irqstat1 %08x\n", stat);
@@ -2702,6 +2742,10 @@ static irqreturn_t net2280_irq (int irq, void *_dev, struct pt_regs * r)
{
struct net2280 *dev = _dev;
+ /* shared interrupt, not ours */
+ if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED)))
+ return IRQ_NONE;
+
spin_lock (&dev->lock);
/* handle disconnect, dma, and more */
@@ -2789,13 +2833,13 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
}
/* alloc, and start init */
- dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ dev = kzalloc (sizeof *dev, SLAB_KERNEL);
if (dev == NULL){
retval = -ENOMEM;
goto done;
}
- memset (dev, 0, sizeof *dev);
+ pci_set_drvdata (pdev, dev);
spin_lock_init (&dev->lock);
dev->pdev = pdev;
dev->gadget.ops = &net2280_ops;
@@ -2908,7 +2952,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
/* done */
- pci_set_drvdata (pdev, dev);
INFO (dev, "%s\n", driver_desc);
INFO (dev, "irq %s, pci mem %p, chip rev %04x\n",
bufp, base, dev->chiprev);
@@ -2939,6 +2982,13 @@ static struct pci_device_id pci_ids [] = { {
.device = 0x2280,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
+}, {
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x17cc,
+ .device = 0x2282,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
}, { /* end: all zeroes */ }
};
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index fff4509cf340..957d6df34015 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -22,420 +22,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-/*-------------------------------------------------------------------------*/
-
-/* NET2280 MEMORY MAPPED REGISTERS
- *
- * The register layout came from the chip documentation, and the bit
- * number definitions were extracted from chip specification.
- *
- * Use the shift operator ('<<') to build bit masks, with readl/writel
- * to access the registers through PCI.
- */
-
-/* main registers, BAR0 + 0x0000 */
-struct net2280_regs {
- // offset 0x0000
- u32 devinit;
-#define LOCAL_CLOCK_FREQUENCY 8
-#define FORCE_PCI_RESET 7
-#define PCI_ID 6
-#define PCI_ENABLE 5
-#define FIFO_SOFT_RESET 4
-#define CFG_SOFT_RESET 3
-#define PCI_SOFT_RESET 2
-#define USB_SOFT_RESET 1
-#define M8051_RESET 0
- u32 eectl;
-#define EEPROM_ADDRESS_WIDTH 23
-#define EEPROM_CHIP_SELECT_ACTIVE 22
-#define EEPROM_PRESENT 21
-#define EEPROM_VALID 20
-#define EEPROM_BUSY 19
-#define EEPROM_CHIP_SELECT_ENABLE 18
-#define EEPROM_BYTE_READ_START 17
-#define EEPROM_BYTE_WRITE_START 16
-#define EEPROM_READ_DATA 8
-#define EEPROM_WRITE_DATA 0
- u32 eeclkfreq;
- u32 _unused0;
- // offset 0x0010
-
- u32 pciirqenb0; /* interrupt PCI master ... */
-#define SETUP_PACKET_INTERRUPT_ENABLE 7
-#define ENDPOINT_F_INTERRUPT_ENABLE 6
-#define ENDPOINT_E_INTERRUPT_ENABLE 5
-#define ENDPOINT_D_INTERRUPT_ENABLE 4
-#define ENDPOINT_C_INTERRUPT_ENABLE 3
-#define ENDPOINT_B_INTERRUPT_ENABLE 2
-#define ENDPOINT_A_INTERRUPT_ENABLE 1
-#define ENDPOINT_0_INTERRUPT_ENABLE 0
- u32 pciirqenb1;
-#define PCI_INTERRUPT_ENABLE 31
-#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
-#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
-#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
-#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
-#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
-#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18
-#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
-#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
-#define GPIO_INTERRUPT_ENABLE 13
-#define DMA_D_INTERRUPT_ENABLE 12
-#define DMA_C_INTERRUPT_ENABLE 11
-#define DMA_B_INTERRUPT_ENABLE 10
-#define DMA_A_INTERRUPT_ENABLE 9
-#define EEPROM_DONE_INTERRUPT_ENABLE 8
-#define VBUS_INTERRUPT_ENABLE 7
-#define CONTROL_STATUS_INTERRUPT_ENABLE 6
-#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
-#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
-#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
-#define RESUME_INTERRUPT_ENABLE 1
-#define SOF_INTERRUPT_ENABLE 0
- u32 cpu_irqenb0; /* ... or onboard 8051 */
-#define SETUP_PACKET_INTERRUPT_ENABLE 7
-#define ENDPOINT_F_INTERRUPT_ENABLE 6
-#define ENDPOINT_E_INTERRUPT_ENABLE 5
-#define ENDPOINT_D_INTERRUPT_ENABLE 4
-#define ENDPOINT_C_INTERRUPT_ENABLE 3
-#define ENDPOINT_B_INTERRUPT_ENABLE 2
-#define ENDPOINT_A_INTERRUPT_ENABLE 1
-#define ENDPOINT_0_INTERRUPT_ENABLE 0
- u32 cpu_irqenb1;
-#define CPU_INTERRUPT_ENABLE 31
-#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
-#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
-#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
-#define PCI_INTA_INTERRUPT_ENABLE 24
-#define PCI_PME_INTERRUPT_ENABLE 23
-#define PCI_SERR_INTERRUPT_ENABLE 22
-#define PCI_PERR_INTERRUPT_ENABLE 21
-#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
-#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
-#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
-#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
-#define GPIO_INTERRUPT_ENABLE 13
-#define DMA_D_INTERRUPT_ENABLE 12
-#define DMA_C_INTERRUPT_ENABLE 11
-#define DMA_B_INTERRUPT_ENABLE 10
-#define DMA_A_INTERRUPT_ENABLE 9
-#define EEPROM_DONE_INTERRUPT_ENABLE 8
-#define VBUS_INTERRUPT_ENABLE 7
-#define CONTROL_STATUS_INTERRUPT_ENABLE 6
-#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
-#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
-#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
-#define RESUME_INTERRUPT_ENABLE 1
-#define SOF_INTERRUPT_ENABLE 0
-
- // offset 0x0020
- u32 _unused1;
- u32 usbirqenb1;
-#define USB_INTERRUPT_ENABLE 31
-#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
-#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
-#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
-#define PCI_INTA_INTERRUPT_ENABLE 24
-#define PCI_PME_INTERRUPT_ENABLE 23
-#define PCI_SERR_INTERRUPT_ENABLE 22
-#define PCI_PERR_INTERRUPT_ENABLE 21
-#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
-#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
-#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
-#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
-#define GPIO_INTERRUPT_ENABLE 13
-#define DMA_D_INTERRUPT_ENABLE 12
-#define DMA_C_INTERRUPT_ENABLE 11
-#define DMA_B_INTERRUPT_ENABLE 10
-#define DMA_A_INTERRUPT_ENABLE 9
-#define EEPROM_DONE_INTERRUPT_ENABLE 8
-#define VBUS_INTERRUPT_ENABLE 7
-#define CONTROL_STATUS_INTERRUPT_ENABLE 6
-#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
-#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
-#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
-#define RESUME_INTERRUPT_ENABLE 1
-#define SOF_INTERRUPT_ENABLE 0
- u32 irqstat0;
-#define INTA_ASSERTED 12
-#define SETUP_PACKET_INTERRUPT 7
-#define ENDPOINT_F_INTERRUPT 6
-#define ENDPOINT_E_INTERRUPT 5
-#define ENDPOINT_D_INTERRUPT 4
-#define ENDPOINT_C_INTERRUPT 3
-#define ENDPOINT_B_INTERRUPT 2
-#define ENDPOINT_A_INTERRUPT 1
-#define ENDPOINT_0_INTERRUPT 0
- u32 irqstat1;
-#define POWER_STATE_CHANGE_INTERRUPT 27
-#define PCI_ARBITER_TIMEOUT_INTERRUPT 26
-#define PCI_PARITY_ERROR_INTERRUPT 25
-#define PCI_INTA_INTERRUPT 24
-#define PCI_PME_INTERRUPT 23
-#define PCI_SERR_INTERRUPT 22
-#define PCI_PERR_INTERRUPT 21
-#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20
-#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19
-#define PCI_RETRY_ABORT_INTERRUPT 17
-#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16
-#define GPIO_INTERRUPT 13
-#define DMA_D_INTERRUPT 12
-#define DMA_C_INTERRUPT 11
-#define DMA_B_INTERRUPT 10
-#define DMA_A_INTERRUPT 9
-#define EEPROM_DONE_INTERRUPT 8
-#define VBUS_INTERRUPT 7
-#define CONTROL_STATUS_INTERRUPT 6
-#define ROOT_PORT_RESET_INTERRUPT 4
-#define SUSPEND_REQUEST_INTERRUPT 3
-#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2
-#define RESUME_INTERRUPT 1
-#define SOF_INTERRUPT 0
- // offset 0x0030
- u32 idxaddr;
- u32 idxdata;
- u32 fifoctl;
-#define PCI_BASE2_RANGE 16
-#define IGNORE_FIFO_AVAILABILITY 3
-#define PCI_BASE2_SELECT 2
-#define FIFO_CONFIGURATION_SELECT 0
- u32 _unused2;
- // offset 0x0040
- u32 memaddr;
-#define START 28
-#define DIRECTION 27
-#define FIFO_DIAGNOSTIC_SELECT 24
-#define MEMORY_ADDRESS 0
- u32 memdata0;
- u32 memdata1;
- u32 _unused3;
- // offset 0x0050
- u32 gpioctl;
-#define GPIO3_LED_SELECT 12
-#define GPIO3_INTERRUPT_ENABLE 11
-#define GPIO2_INTERRUPT_ENABLE 10
-#define GPIO1_INTERRUPT_ENABLE 9
-#define GPIO0_INTERRUPT_ENABLE 8
-#define GPIO3_OUTPUT_ENABLE 7
-#define GPIO2_OUTPUT_ENABLE 6
-#define GPIO1_OUTPUT_ENABLE 5
-#define GPIO0_OUTPUT_ENABLE 4
-#define GPIO3_DATA 3
-#define GPIO2_DATA 2
-#define GPIO1_DATA 1
-#define GPIO0_DATA 0
- u32 gpiostat;
-#define GPIO3_INTERRUPT 3
-#define GPIO2_INTERRUPT 2
-#define GPIO1_INTERRUPT 1
-#define GPIO0_INTERRUPT 0
-} __attribute__ ((packed));
-
-/* usb control, BAR0 + 0x0080 */
-struct net2280_usb_regs {
- // offset 0x0080
- u32 stdrsp;
-#define STALL_UNSUPPORTED_REQUESTS 31
-#define SET_TEST_MODE 16
-#define GET_OTHER_SPEED_CONFIGURATION 15
-#define GET_DEVICE_QUALIFIER 14
-#define SET_ADDRESS 13
-#define ENDPOINT_SET_CLEAR_HALT 12
-#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11
-#define GET_STRING_DESCRIPTOR_2 10
-#define GET_STRING_DESCRIPTOR_1 9
-#define GET_STRING_DESCRIPTOR_0 8
-#define GET_SET_INTERFACE 6
-#define GET_SET_CONFIGURATION 5
-#define GET_CONFIGURATION_DESCRIPTOR 4
-#define GET_DEVICE_DESCRIPTOR 3
-#define GET_ENDPOINT_STATUS 2
-#define GET_INTERFACE_STATUS 1
-#define GET_DEVICE_STATUS 0
- u32 prodvendid;
-#define PRODUCT_ID 16
-#define VENDOR_ID 0
- u32 relnum;
- u32 usbctl;
-#define SERIAL_NUMBER_INDEX 16
-#define PRODUCT_ID_STRING_ENABLE 13
-#define VENDOR_ID_STRING_ENABLE 12
-#define USB_ROOT_PORT_WAKEUP_ENABLE 11
-#define VBUS_PIN 10
-#define TIMED_DISCONNECT 9
-#define SUSPEND_IMMEDIATELY 7
-#define SELF_POWERED_USB_DEVICE 6
-#define REMOTE_WAKEUP_SUPPORT 5
-#define PME_POLARITY 4
-#define USB_DETECT_ENABLE 3
-#define PME_WAKEUP_ENABLE 2
-#define DEVICE_REMOTE_WAKEUP_ENABLE 1
-#define SELF_POWERED_STATUS 0
- // offset 0x0090
- u32 usbstat;
-#define HIGH_SPEED 7
-#define FULL_SPEED 6
-#define GENERATE_RESUME 5
-#define GENERATE_DEVICE_REMOTE_WAKEUP 4
- u32 xcvrdiag;
-#define FORCE_HIGH_SPEED_MODE 31
-#define FORCE_FULL_SPEED_MODE 30
-#define USB_TEST_MODE 24
-#define LINE_STATE 16
-#define TRANSCEIVER_OPERATION_MODE 2
-#define TRANSCEIVER_SELECT 1
-#define TERMINATION_SELECT 0
- u32 setup0123;
- u32 setup4567;
- // offset 0x0090
- u32 _unused0;
- u32 ouraddr;
-#define FORCE_IMMEDIATE 7
-#define OUR_USB_ADDRESS 0
- u32 ourconfig;
-} __attribute__ ((packed));
-
-/* pci control, BAR0 + 0x0100 */
-struct net2280_pci_regs {
- // offset 0x0100
- u32 pcimstctl;
-#define PCI_ARBITER_PARK_SELECT 13
-#define PCI_MULTI LEVEL_ARBITER 12
-#define PCI_RETRY_ABORT_ENABLE 11
-#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10
-#define DMA_READ_MULTIPLE_ENABLE 9
-#define DMA_READ_LINE_ENABLE 8
-#define PCI_MASTER_COMMAND_SELECT 6
-#define MEM_READ_OR_WRITE 0
-#define IO_READ_OR_WRITE 1
-#define CFG_READ_OR_WRITE 2
-#define PCI_MASTER_START 5
-#define PCI_MASTER_READ_WRITE 4
-#define PCI_MASTER_WRITE 0
-#define PCI_MASTER_READ 1
-#define PCI_MASTER_BYTE_WRITE_ENABLES 0
- u32 pcimstaddr;
- u32 pcimstdata;
- u32 pcimststat;
-#define PCI_ARBITER_CLEAR 2
-#define PCI_EXTERNAL_ARBITER 1
-#define PCI_HOST_MODE 0
-} __attribute__ ((packed));
-
-/* dma control, BAR0 + 0x0180 ... array of four structs like this,
- * for channels 0..3. see also struct net2280_dma: descriptor
- * that can be loaded into some of these registers.
- */
-struct net2280_dma_regs { /* [11.7] */
- // offset 0x0180, 0x01a0, 0x01c0, 0x01e0,
- u32 dmactl;
-#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25
-#define DMA_CLEAR_COUNT_ENABLE 21
-#define DESCRIPTOR_POLLING_RATE 19
-#define POLL_CONTINUOUS 0
-#define POLL_1_USEC 1
-#define POLL_100_USEC 2
-#define POLL_1_MSEC 3
-#define DMA_VALID_BIT_POLLING_ENABLE 18
-#define DMA_VALID_BIT_ENABLE 17
-#define DMA_SCATTER_GATHER_ENABLE 16
-#define DMA_OUT_AUTO_START_ENABLE 4
-#define DMA_PREEMPT_ENABLE 3
-#define DMA_FIFO_VALIDATE 2
-#define DMA_ENABLE 1
-#define DMA_ADDRESS_HOLD 0
- u32 dmastat;
-#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25
-#define DMA_TRANSACTION_DONE_INTERRUPT 24
-#define DMA_ABORT 1
-#define DMA_START 0
- u32 _unused0 [2];
- // offset 0x0190, 0x01b0, 0x01d0, 0x01f0,
- u32 dmacount;
-#define VALID_BIT 31
-#define DMA_DIRECTION 30
-#define DMA_DONE_INTERRUPT_ENABLE 29
-#define END_OF_CHAIN 28
-#define DMA_BYTE_COUNT_MASK ((1<<24)-1)
-#define DMA_BYTE_COUNT 0
- u32 dmaaddr;
- u32 dmadesc;
- u32 _unused1;
-} __attribute__ ((packed));
-
-/* dedicated endpoint registers, BAR0 + 0x0200 */
-
-struct net2280_dep_regs { /* [11.8] */
- // offset 0x0200, 0x0210, 0x220, 0x230, 0x240
- u32 dep_cfg;
- // offset 0x0204, 0x0214, 0x224, 0x234, 0x244
- u32 dep_rsp;
- u32 _unused [2];
-} __attribute__ ((packed));
-
-/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
- * like this, for ep0 then the configurable endpoints A..F
- * ep0 reserved for control; E and F have only 64 bytes of fifo
- */
-struct net2280_ep_regs { /* [11.9] */
- // offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
- u32 ep_cfg;
-#define ENDPOINT_BYTE_COUNT 16
-#define ENDPOINT_ENABLE 10
-#define ENDPOINT_TYPE 8
-#define ENDPOINT_DIRECTION 7
-#define ENDPOINT_NUMBER 0
- u32 ep_rsp;
-#define SET_NAK_OUT_PACKETS 15
-#define SET_EP_HIDE_STATUS_PHASE 14
-#define SET_EP_FORCE_CRC_ERROR 13
-#define SET_INTERRUPT_MODE 12
-#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11
-#define SET_NAK_OUT_PACKETS_MODE 10
-#define SET_ENDPOINT_TOGGLE 9
-#define SET_ENDPOINT_HALT 8
-#define CLEAR_NAK_OUT_PACKETS 7
-#define CLEAR_EP_HIDE_STATUS_PHASE 6
-#define CLEAR_EP_FORCE_CRC_ERROR 5
-#define CLEAR_INTERRUPT_MODE 4
-#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3
-#define CLEAR_NAK_OUT_PACKETS_MODE 2
-#define CLEAR_ENDPOINT_TOGGLE 1
-#define CLEAR_ENDPOINT_HALT 0
- u32 ep_irqenb;
-#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6
-#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5
-#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
-#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
-#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1
-#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
- u32 ep_stat;
-#define FIFO_VALID_COUNT 24
-#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22
-#define TIMEOUT 21
-#define USB_STALL_SENT 20
-#define USB_IN_NAK_SENT 19
-#define USB_IN_ACK_RCVD 18
-#define USB_OUT_PING_NAK_SENT 17
-#define USB_OUT_ACK_SENT 16
-#define FIFO_OVERFLOW 13
-#define FIFO_UNDERFLOW 12
-#define FIFO_FULL 11
-#define FIFO_EMPTY 10
-#define FIFO_FLUSH 9
-#define SHORT_PACKET_OUT_DONE_INTERRUPT 6
-#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5
-#define NAK_OUT_PACKETS 4
-#define DATA_PACKET_RECEIVED_INTERRUPT 3
-#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
-#define DATA_OUT_PING_TOKEN_INTERRUPT 1
-#define DATA_IN_TOKEN_INTERRUPT 0
- // offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
- u32 ep_avail;
- u32 ep_data;
- u32 _unused0 [2];
-} __attribute__ ((packed));
+#include <linux/usb/net2280.h>
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 51424f66a765..68e3d8f5da89 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -572,9 +572,10 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
switch (status) {
case 0: /* normal completion? */
- if (ep == dev->out_ep)
+ if (ep == dev->out_ep) {
check_read_data (dev, ep, req);
- else
+ memset (req->buf, 0x55, req->length);
+ } else
reinit_write_data (dev, ep, req);
break;
@@ -626,6 +627,8 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
if (strcmp (ep->name, EP_IN_NAME) == 0)
reinit_write_data (ep->driver_data, ep, req);
+ else
+ memset (req->buf, 0x55, req->length);
status = usb_ep_queue (ep, req, gfp_flags);
if (status) {
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 1e03f1a5a5fd..a1bd2bea6deb 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -350,7 +350,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
/* PCI driver selection metadata; PCI hotplugging uses this */
static const struct pci_device_id pci_ids [] = { {
/* handle any USB 2.0 EHCI controller */
- PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
.driver_data = (unsigned long) &ehci_pci_hc_driver,
},
{ /* end: all zeroes */ }
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 980030d684d5..6b7350b52419 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -20,7 +20,7 @@
#include <asm/arch/board.h>
#ifndef CONFIG_ARCH_AT91RM9200
-#error "This file is AT91RM9200 bus glue. CONFIG_ARCH_AT91RM9200 must be defined."
+#error "CONFIG_ARCH_AT91RM9200 must be defined."
#endif
/* interface and function clocks */
@@ -84,8 +84,6 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
*/
int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
{
@@ -148,7 +146,6 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *
}
-/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
@@ -166,11 +163,11 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde
usb_remove_hcd(hcd);
at91_stop_hc(pdev);
iounmap(hcd->regs);
- release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- clk_put(fclk);
- clk_put(iclk);
- fclk = iclk = NULL;
+ clk_put(fclk);
+ clk_put(iclk);
+ fclk = iclk = NULL;
dev_set_drvdata(&pdev->dev, NULL);
return 0;
@@ -235,8 +232,8 @@ static const struct hc_driver ohci_at91_hc_driver = {
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -254,21 +251,21 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
}
#ifdef CONFIG_PM
-static int ohci_hcd_at91_drv_suspend(struct platform_device *dev, u32 state, u32 level)
-{
- printk("%s(%s:%d): not implemented yet\n",
- __func__, __FILE__, __LINE__);
+/* REVISIT suspend/resume look "too" simple here */
+
+static int
+ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
+{
clk_disable(fclk);
+ clk_disable(iclk);
return 0;
}
-static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
+static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
{
- printk("%s(%s:%d): not implemented yet\n",
- __func__, __FILE__, __LINE__);
-
+ clk_enable(iclk);
clk_enable(fclk);
return 0;
@@ -278,6 +275,8 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
#define ohci_hcd_at91_drv_resume NULL
#endif
+MODULE_ALIAS("at91rm9200-ohci");
+
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
.remove = ohci_hcd_at91_drv_remove,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 544f7589912f..73f5a379d9b3 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
i = ohci->num_ports;
while (i--)
ohci_writel (ohci, RH_PS_PSS,
- &ohci->regs->roothub.portstatus [temp]);
+ &ohci->regs->roothub.portstatus [i]);
ohci_dbg (ohci, "restart complete\n");
}
return 0;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 1bfe96f4d045..b268537e389e 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -206,7 +206,7 @@ static const struct hc_driver ohci_pci_hc_driver = {
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
- PCI_DEVICE_CLASS((PCI_CLASS_SERIAL_USB << 8) | 0x10, ~0),
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
}, { /* end: all zeroes */ }
};
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 682bf2215660..1da5de573a6f 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -30,6 +30,7 @@
/* clock device associated with the hcd */
static struct clk *clk;
+static struct clk *usb_clk;
/* forward definitions */
@@ -37,7 +38,7 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
/* conversion functions */
-struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
{
return hcd->self.controller->platform_data;
}
@@ -47,6 +48,10 @@ static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
struct s3c2410_hcd_info *info = dev->dev.platform_data;
dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+
+ clk_enable(usb_clk);
+ mdelay(2); /* let the bus clock stabilise */
+
clk_enable(clk);
if (info != NULL) {
@@ -75,6 +80,7 @@ static void s3c2410_stop_hc(struct platform_device *dev)
}
clk_disable(clk);
+ clk_disable(usb_clk);
}
/* ohci_s3c2410_hub_status_data
@@ -316,7 +322,8 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
*
*/
-void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+static void
+usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
{
usb_remove_hcd(hcd);
s3c2410_stop_hc(dev);
@@ -334,8 +341,8 @@ void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
* through the hotplug entry's driver_data.
*
*/
-int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
- struct platform_device *dev)
+static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+ struct platform_device *dev)
{
struct usb_hcd *hcd = NULL;
int retval;
@@ -353,14 +360,21 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dev_err(&dev->dev, "request_mem_region failed");
retval = -EBUSY;
- goto err0;
+ goto err_put;
}
- clk = clk_get(NULL, "usb-host");
+ clk = clk_get(&dev->dev, "usb-host");
if (IS_ERR(clk)) {
dev_err(&dev->dev, "cannot get usb-host clock\n");
retval = -ENOENT;
- goto err1;
+ goto err_mem;
+ }
+
+ usb_clk = clk_get(&dev->dev, "upll");
+ if (IS_ERR(usb_clk)) {
+ dev_err(&dev->dev, "cannot get usb-host clock\n");
+ retval = -ENOENT;
+ goto err_clk;
}
s3c2410_start_hc(dev, hcd);
@@ -369,26 +383,29 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
if (!hcd->regs) {
dev_err(&dev->dev, "ioremap failed\n");
retval = -ENOMEM;
- goto err2;
+ goto err_ioremap;
}
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
if (retval != 0)
- goto err2;
+ goto err_ioremap;
return 0;
- err2:
+ err_ioremap:
s3c2410_stop_hc(dev);
iounmap(hcd->regs);
+ clk_put(usb_clk);
+
+ err_clk:
clk_put(clk);
- err1:
+ err_mem:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err0:
+ err_put:
usb_put_hcd(hcd);
return retval;
}
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 9e81c26313f9..1045f846fbe2 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/acpi.h>
+#include "pci-quirks.h"
#define UHCI_USBLEGSUP 0xc0 /* legacy support */
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
new file mode 100644
index 000000000000..1564edfff6fe
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.h
@@ -0,0 +1,7 @@
+#ifndef __LINUX_USB_PCI_QUIRKS_H
+#define __LINUX_USB_PCI_QUIRKS_H
+
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
+#endif /* __LINUX_USB_PCI_QUIRKS_H */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4edb8330c440..d225e11f4055 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -50,6 +50,7 @@
#include "../core/hcd.h"
#include "uhci-hcd.h"
+#include "pci-quirks.h"
/*
* Version Information
@@ -100,9 +101,6 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
#include "uhci-q.c"
#include "uhci-hub.c"
-extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-
/*
* Finish up a host controller reset and update the recorded state.
*/
@@ -117,8 +115,7 @@ static void finish_reset(struct uhci_hcd *uhci)
for (port = 0; port < uhci->rh_numports; ++port)
outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
- uhci->port_c_suspend = uhci->suspended_ports =
- uhci->resuming_ports = 0;
+ uhci->port_c_suspend = uhci->resuming_ports = 0;
uhci->rh_state = UHCI_RH_RESET;
uhci->is_stopped = UHCI_IS_STOPPED;
uhci_to_hcd(uhci)->state = HC_STATE_HALT;
@@ -861,7 +858,7 @@ static const struct hc_driver uhci_driver = {
static const struct pci_device_id uhci_pci_ids[] = { {
/* handle any USB UHCI controller */
- PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
.driver_data = (unsigned long) &uhci_driver,
}, { /* end: all zeroes */ }
};
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 4a69c7eb09bd..d5c8f4d92823 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -415,7 +415,6 @@ struct uhci_hcd {
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
- unsigned long suspended_ports;
unsigned long resuming_ports;
unsigned long ports_timeout; /* Time to stop signalling */
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 152971d16769..c8451d9578f1 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -85,11 +85,10 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
{
int status;
- if (test_bit(port, &uhci->suspended_ports)) {
+ if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
- clear_bit(port, &uhci->suspended_ports);
- clear_bit(port, &uhci->resuming_ports);
- set_bit(port, &uhci->port_c_suspend);
+ if (test_bit(port, &uhci->resuming_ports))
+ set_bit(port, &uhci->port_c_suspend);
/* The controller won't actually turn off the RD bit until
* it has had a chance to send a low-speed EOP sequence,
@@ -97,6 +96,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
* slightly longer for good luck. */
udelay(4);
}
+ clear_bit(port, &uhci->resuming_ports);
}
/* Wait for the UHCI controller in HP's iLO2 server management chip.
@@ -265,8 +265,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
wPortChange |= USB_PORT_STAT_C_SUSPEND;
lstatus |= 1;
}
- if (test_bit(port, &uhci->suspended_ports))
- lstatus |= 2;
if (test_bit(port, &uhci->resuming_ports))
lstatus |= 4;
@@ -309,7 +307,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- set_bit(port, &uhci->suspended_ports);
SET_RH_PORTSTAT(USBPORTSC_SUSP);
OK(0);
case USB_PORT_FEAT_RESET:
@@ -343,8 +340,11 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
CLR_RH_PORTSTAT(USBPORTSC_PEC);
OK(0);
case USB_PORT_FEAT_SUSPEND:
- if (test_bit(port, &uhci->suspended_ports) &&
- !test_and_set_bit(port,
+ if (!(inw(port_addr) & USBPORTSC_SUSP)) {
+
+ /* Make certain the port isn't suspended */
+ uhci_finish_suspend(uhci, port, port_addr);
+ } else if (!test_and_set_bit(port,
&uhci->resuming_ports)) {
SET_RH_PORTSTAT(USBPORTSC_RD);
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 5246b35301de..650103bc9618 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -200,45 +200,41 @@ config USB_POWERMATE
To compile this driver as a module, choose M here: the
module will be called powermate.
-config USB_MTOUCH
- tristate "MicroTouch USB Touchscreen Driver"
+config USB_TOUCHSCREEN
+ tristate "USB Touchscreen Driver"
depends on USB && INPUT
---help---
- Say Y here if you want to use a MicroTouch (Now 3M) USB
- Touchscreen controller.
+ USB Touchscreen driver for:
+ - eGalax Touchkit USB
+ - PanJit TouchSet USB
+ - 3M MicroTouch USB
+ - ITM
- See <file:Documentation/usb/mtouch.txt> for additional information.
-
- To compile this driver as a module, choose M here: the
- module will be called mtouchusb.
-
-config USB_ITMTOUCH
- tristate "ITM Touch USB Touchscreen Driver"
- depends on USB && INPUT
- ---help---
- Say Y here if you want to use a ITM Touch USB
- Touchscreen controller.
-
- This touchscreen is used in LG 1510SF monitors.
+ Have a look at <http://linux.chapter7.ch/touchkit/> for
+ a usage description and the required user-space stuff.
To compile this driver as a module, choose M here: the
- module will be called itmtouch.
+ module will be called usbtouchscreen.
-config USB_EGALAX
- tristate "eGalax TouchKit USB Touchscreen Driver"
- depends on USB && INPUT
- ---help---
- Say Y here if you want to use a eGalax TouchKit USB
- Touchscreen controller.
+config USB_TOUCHSCREEN_EGALAX
+ default y
+ bool "eGalax device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
- The driver has been tested on a Xenarc 700TSV monitor
- with eGalax touchscreen.
+config USB_TOUCHSCREEN_PANJIT
+ default y
+ bool "PanJit device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
- Have a look at <http://linux.chapter7.ch/touchkit/> for
- a usage description and the required user-space stuff.
+config USB_TOUCHSCREEN_3M
+ default y
+ bool "3M/Microtouch device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
- To compile this driver as a module, choose M here: the
- module will be called touchkitusb.
+config USB_TOUCHSCREEN_ITM
+ default y
+ bool "ITM device support" if EMBEDDED
+ depends on USB_TOUCHSCREEN
config USB_YEALINK
tristate "Yealink usb-p1k voip phone"
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index d512d9f488fe..764114529c56 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_USB_MOUSE) += usbmouse.o
obj-$(CONFIG_USB_MTOUCH) += mtouchusb.o
obj-$(CONFIG_USB_ITMTOUCH) += itmtouch.o
obj-$(CONFIG_USB_EGALAX) += touchkitusb.o
+obj-$(CONFIG_USB_TOUCHSCREEN) += usbtouchscreen.o
obj-$(CONFIG_USB_POWERMATE) += powermate.o
obj-$(CONFIG_USB_WACOM) += wacom.o
obj-$(CONFIG_USB_ACECAD) += acecad.o
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index d4bf1701046b..435273e7c85c 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1372,6 +1372,11 @@ void hid_close(struct hid_device *hid)
usb_kill_urb(hid->urbin);
}
+#define USB_VENDOR_ID_PANJIT 0x134c
+
+#define USB_VENDOR_ID_SILVERCREST 0x062a
+#define USB_DEVICE_ID_SILVERCREST_KB 0x0201
+
/*
* Initialize all reports
*/
@@ -1552,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_HP 0x03f0
#define USB_DEVICE_ID_HP_USBHUB_KB 0x020c
+#define USB_VENDOR_ID_IBM 0x04b3
+#define USB_DEVICE_ID_IBM_USBHUB_KB 0x3005
+
#define USB_VENDOR_ID_CREATIVELABS 0x062a
#define USB_DEVICE_ID_CREATIVELABS_SILVERCREST 0x0201
@@ -1655,9 +1663,12 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 3, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 4, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF + 3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
@@ -1673,8 +1684,10 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+ { USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
@@ -1701,6 +1714,11 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
+
{ 0, 0 }
};
diff --git a/drivers/usb/input/hid-ff.c b/drivers/usb/input/hid-ff.c
index 72e698658b53..d5c91ee67991 100644
--- a/drivers/usb/input/hid-ff.c
+++ b/drivers/usb/input/hid-ff.c
@@ -34,12 +34,6 @@
#include "hid.h"
-/* Drivers' initializing functions */
-extern int hid_lgff_init(struct hid_device* hid);
-extern int hid_lg3d_init(struct hid_device* hid);
-extern int hid_pid_init(struct hid_device* hid);
-extern int hid_tmff_init(struct hid_device* hid);
-
/*
* This table contains pointers to initializers. To add support for new
* devices, you need to add the USB vendor and product ids here.
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index 4e1b784fe527..9c62837b5b89 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -533,3 +533,8 @@ static inline int hid_ff_event(struct hid_device *hid, struct input_dev *input,
return hid->ff_event(hid, input, type, code, value);
return -ENOSYS;
}
+
+int hid_lgff_init(struct hid_device* hid);
+int hid_tmff_init(struct hid_device* hid);
+int hid_pid_init(struct hid_device* hid);
+
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 6dd666696178..c4670e1d4654 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -317,6 +317,7 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
}
schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index b4a051b549d1..3d911976f378 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -297,6 +297,8 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs)
remote->data.bits_left -= 6;
} else {
err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
+ remote->stage = 0;
+ return;
}
keyspan_load_tester(remote, 5);
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
new file mode 100644
index 000000000000..e9a07c1e905b
--- /dev/null
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -0,0 +1,605 @@
+/******************************************************************************
+ * usbtouchscreen.c
+ * Driver for USB Touchscreens, supporting those devices:
+ * - eGalax Touchkit
+ * - 3M/Microtouch
+ * - ITM
+ * - PanJit TouchSet
+ *
+ * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
+ * Copyright (C) by Todd E. Johnson (mtouchusb.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Driver is based on touchkitusb.c
+ * - ITM parts are from itmtouch.c
+ * - 3M parts are from mtouchusb.c
+ * - PanJit parts are from an unmerged driver by Lanslott Gish
+ *
+ *****************************************************************************/
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb_input.h>
+
+
+#define DRIVER_VERSION "v0.3"
+#define DRIVER_AUTHOR "Daniel Ritz <daniel.ritz@gmx.ch>"
+#define DRIVER_DESC "USB Touchscreen Driver"
+
+static int swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
+/* device specifc data/functions */
+struct usbtouch_usb;
+struct usbtouch_device_info {
+ int min_xc, max_xc;
+ int min_yc, max_yc;
+ int min_press, max_press;
+ int rept_size;
+ int flags;
+
+ void (*process_pkt) (struct usbtouch_usb *usbtouch, struct pt_regs *regs, unsigned char *pkt, int len);
+ int (*read_data) (unsigned char *pkt, int *x, int *y, int *touch, int *press);
+ int (*init) (struct usbtouch_usb *usbtouch);
+};
+
+#define USBTOUCH_FLG_BUFFER 0x01
+
+
+/* a usbtouch device */
+struct usbtouch_usb {
+ unsigned char *data;
+ dma_addr_t data_dma;
+ unsigned char *buffer;
+ int buf_len;
+ struct urb *irq;
+ struct usb_device *udev;
+ struct input_dev *input;
+ struct usbtouch_device_info *type;
+ char name[128];
+ char phys[64];
+};
+
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+ struct pt_regs *regs, unsigned char *pkt, int len);
+
+/* device types */
+enum {
+ DEVTPYE_DUMMY = -1,
+ DEVTYPE_EGALAX,
+ DEVTYPE_PANJIT,
+ DEVTYPE_3M,
+ DEVTYPE_ITM,
+};
+
+static struct usb_device_id usbtouch_devices[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+ {USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
+ {USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+ {USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
+ {USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+ {USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+ {USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+#endif
+
+ {}
+};
+
+
+/*****************************************************************************
+ * eGalax part
+ */
+
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+
+#define EGALAX_PKT_TYPE_MASK 0xFE
+#define EGALAX_PKT_TYPE_REPT 0x80
+#define EGALAX_PKT_TYPE_DIAG 0x0A
+
+static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
+ return 0;
+
+ *x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+ *y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+ *touch = pkt[0] & 0x01;
+
+ return 1;
+
+}
+
+static int egalax_get_pkt_len(unsigned char *buf)
+{
+ switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+ case EGALAX_PKT_TYPE_REPT:
+ return 5;
+
+ case EGALAX_PKT_TYPE_DIAG:
+ return buf[1] + 2;
+ }
+
+ return 0;
+}
+
+static void egalax_process(struct usbtouch_usb *usbtouch, struct pt_regs *regs,
+ unsigned char *pkt, int len)
+{
+ unsigned char *buffer;
+ int pkt_len, buf_len, pos;
+
+ /* if the buffer contains data, append */
+ if (unlikely(usbtouch->buf_len)) {
+ int tmp;
+
+ /* if only 1 byte in buffer, add another one to get length */
+ if (usbtouch->buf_len == 1)
+ usbtouch->buffer[1] = pkt[0];
+
+ pkt_len = egalax_get_pkt_len(usbtouch->buffer);
+
+ /* unknown packet: drop everything */
+ if (!pkt_len)
+ return;
+
+ /* append, process */
+ tmp = pkt_len - usbtouch->buf_len;
+ memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+ usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len);
+
+ buffer = pkt + tmp;
+ buf_len = len - tmp;
+ } else {
+ buffer = pkt;
+ buf_len = len;
+ }
+
+ /* only one byte left in buffer */
+ if (unlikely(buf_len == 1)) {
+ usbtouch->buffer[0] = buffer[0];
+ usbtouch->buf_len = 1;
+ return;
+ }
+
+ /* loop over the buffer */
+ pos = 0;
+ while (pos < buf_len) {
+ /* get packet len */
+ pkt_len = egalax_get_pkt_len(buffer + pos);
+
+ /* unknown packet: drop everything */
+ if (unlikely(!pkt_len))
+ return;
+
+ /* full packet: process */
+ if (likely(pkt_len <= buf_len)) {
+ usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len);
+ } else {
+ /* incomplete packet: save in buffer */
+ memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+ usbtouch->buf_len = buf_len - pos;
+ }
+ pos += pkt_len;
+ }
+}
+#endif
+
+
+/*****************************************************************************
+ * PanJit Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ *x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+ *y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+ *touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * 3M/Microtouch Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+
+#define MTOUCHUSB_ASYNC_REPORT 1
+#define MTOUCHUSB_RESET 7
+#define MTOUCHUSB_REQ_CTRLLR_ID 10
+
+static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ *x = (pkt[8] << 8) | pkt[7];
+ *y = (pkt[10] << 8) | pkt[9];
+ *touch = (pkt[2] & 0x40) ? 1 : 0;
+
+ return 1;
+}
+
+static int mtouch_init(struct usbtouch_usb *usbtouch)
+{
+ int ret;
+
+ ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ MTOUCHUSB_RESET,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
+ __FUNCTION__, ret);
+ if (ret < 0)
+ return ret;
+
+ ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+ MTOUCHUSB_ASYNC_REPORT,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
+ __FUNCTION__, ret);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ITM Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+ *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+ *x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+ *press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
+ *touch = ~pkt[7] & 0x20;
+
+ return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * the different device descriptors
+ */
+static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+ [DEVTYPE_EGALAX] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 16,
+ .flags = USBTOUCH_FLG_BUFFER,
+ .process_pkt = egalax_process,
+ .read_data = egalax_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+ [DEVTYPE_PANJIT] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 8,
+ .read_data = panjit_read_data,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+ [DEVTYPE_3M] = {
+ .min_xc = 0x0,
+ .max_xc = 0x4000,
+ .min_yc = 0x0,
+ .max_yc = 0x4000,
+ .rept_size = 11,
+ .read_data = mtouch_read_data,
+ .init = mtouch_init,
+ },
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+ [DEVTYPE_ITM] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .max_press = 0xff,
+ .rept_size = 8,
+ .read_data = itm_read_data,
+ },
+#endif
+};
+
+
+/*****************************************************************************
+ * Generic Part
+ */
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+ struct pt_regs *regs, unsigned char *pkt, int len)
+{
+ int x, y, touch, press;
+ struct usbtouch_device_info *type = usbtouch->type;
+
+ if (!type->read_data(pkt, &x, &y, &touch, &press))
+ return;
+
+ input_regs(usbtouch->input, regs);
+ input_report_key(usbtouch->input, BTN_TOUCH, touch);
+
+ if (swap_xy) {
+ input_report_abs(usbtouch->input, ABS_X, y);
+ input_report_abs(usbtouch->input, ABS_Y, x);
+ } else {
+ input_report_abs(usbtouch->input, ABS_X, x);
+ input_report_abs(usbtouch->input, ABS_Y, y);
+ }
+ if (type->max_press)
+ input_report_abs(usbtouch->input, ABS_PRESSURE, press);
+ input_sync(usbtouch->input);
+}
+
+
+static void usbtouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct usbtouch_usb *usbtouch = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ETIMEDOUT:
+ /* this urb is timing out */
+ dbg("%s - urb timed out - was the device unplugged?",
+ __FUNCTION__);
+ return;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ usbtouch->type->process_pkt(usbtouch, regs, usbtouch->data, urb->actual_length);
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ err("%s - usb_submit_urb failed with result: %d",
+ __FUNCTION__, retval);
+}
+
+static int usbtouch_open(struct input_dev *input)
+{
+ struct usbtouch_usb *usbtouch = input->private;
+
+ usbtouch->irq->dev = usbtouch->udev;
+
+ if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void usbtouch_close(struct input_dev *input)
+{
+ struct usbtouch_usb *usbtouch = input->private;
+
+ usb_kill_urb(usbtouch->irq);
+}
+
+
+static void usbtouch_free_buffers(struct usb_device *udev,
+ struct usbtouch_usb *usbtouch)
+{
+ if (usbtouch->data)
+ usb_buffer_free(udev, usbtouch->type->rept_size,
+ usbtouch->data, usbtouch->data_dma);
+ kfree(usbtouch->buffer);
+}
+
+
+static int usbtouch_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usbtouch_usb *usbtouch;
+ struct input_dev *input_dev;
+ struct usb_host_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usbtouch_device_info *type;
+ int err;
+
+ interface = intf->cur_altsetting;
+ endpoint = &interface->endpoint[0].desc;
+
+ usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!usbtouch || !input_dev)
+ goto out_free;
+
+ type = &usbtouch_dev_info[id->driver_info];
+ usbtouch->type = type;
+ if (!type->process_pkt)
+ type->process_pkt = usbtouch_process_pkt;
+
+ usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
+ SLAB_KERNEL, &usbtouch->data_dma);
+ if (!usbtouch->data)
+ goto out_free;
+
+ if (type->flags & USBTOUCH_FLG_BUFFER) {
+ usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
+ if (!usbtouch->buffer)
+ goto out_free_buffers;
+ }
+
+ usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!usbtouch->irq) {
+ dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__);
+ goto out_free_buffers;
+ }
+
+ usbtouch->udev = udev;
+ usbtouch->input = input_dev;
+
+ if (udev->manufacturer)
+ strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
+ strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
+ }
+
+ if (!strlen(usbtouch->name))
+ snprintf(usbtouch->name, sizeof(usbtouch->name),
+ "USB Touchscreen %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
+ strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
+
+ input_dev->name = usbtouch->name;
+ input_dev->phys = usbtouch->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->cdev.dev = &intf->dev;
+ input_dev->private = usbtouch;
+ input_dev->open = usbtouch_open;
+ input_dev->close = usbtouch_close;
+
+ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
+ if (type->max_press)
+ input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
+ type->max_press, 0, 0);
+
+ usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
+ usb_rcvintpipe(usbtouch->udev, 0x81),
+ usbtouch->data, type->rept_size,
+ usbtouch_irq, usbtouch, endpoint->bInterval);
+
+ usbtouch->irq->transfer_dma = usbtouch->data_dma;
+ usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* device specific init */
+ if (type->init) {
+ err = type->init(usbtouch);
+ if (err) {
+ dbg("%s - type->init() failed, err: %d", __FUNCTION__, err);
+ goto out_free_buffers;
+ }
+ }
+
+ err = input_register_device(usbtouch->input);
+ if (err) {
+ dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err);
+ goto out_free_buffers;
+ }
+
+ usb_set_intfdata(intf, usbtouch);
+
+ return 0;
+
+out_free_buffers:
+ usbtouch_free_buffers(udev, usbtouch);
+out_free:
+ input_free_device(input_dev);
+ kfree(usbtouch);
+ return -ENOMEM;
+}
+
+static void usbtouch_disconnect(struct usb_interface *intf)
+{
+ struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+ dbg("%s - called", __FUNCTION__);
+
+ if (!usbtouch)
+ return;
+
+ dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__);
+ usb_set_intfdata(intf, NULL);
+ usb_kill_urb(usbtouch->irq);
+ input_unregister_device(usbtouch->input);
+ usb_free_urb(usbtouch->irq);
+ usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
+ kfree(usbtouch);
+}
+
+MODULE_DEVICE_TABLE(usb, usbtouch_devices);
+
+static struct usb_driver usbtouch_driver = {
+ .name = "usbtouchscreen",
+ .probe = usbtouch_probe,
+ .disconnect = usbtouch_disconnect,
+ .id_table = usbtouch_devices,
+};
+
+static int __init usbtouch_init(void)
+{
+ return usb_register(&usbtouch_driver);
+}
+
+static void __exit usbtouch_cleanup(void)
+{
+ usb_deregister(&usbtouch_driver);
+}
+
+module_init(usbtouch_init);
+module_exit(usbtouch_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("touchkitusb");
+MODULE_ALIAS("itmtouch");
+MODULE_ALIAS("mtouchusb");
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index d3e15df9e815..cf84c6096f29 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -9,7 +9,7 @@
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-2005 Ping Cheng <pingc@wacom.com>
+ * Copyright (c) 2002-2006 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
@@ -56,6 +56,8 @@
* - Merged wacom_intuos3_irq into wacom_intuos_irq
* v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
* - Report Device IDs
+ * v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
+ * - Minor data report fix
*/
/*
@@ -78,7 +80,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.44"
+#define DRIVER_VERSION "v1.45"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
@@ -99,6 +101,8 @@ enum {
PL,
INTUOS,
INTUOS3,
+ INTUOS312,
+ INTUOS319,
CINTIQ,
MAX_TYPE
};
@@ -127,7 +131,19 @@ struct wacom {
char phys[32];
};
+#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+
+static int usb_get_report(struct usb_interface *intf, unsigned char type,
+ unsigned char id, void *buf, int size)
+{
+ return usb_control_msg(interface_to_usbdev(intf),
+ usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+ USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+ buf, size, 100);
+}
+
static int usb_set_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
{
@@ -206,7 +222,8 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
wacom->tool[1] = BTN_TOOL_PEN;
id = STYLUS_DEVICE_ID;
}
- input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */
+ input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
+ input_report_abs(dev, ABS_MISC, id); /* report tool id */
input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
input_report_abs(dev, ABS_PRESSURE, pressure);
@@ -239,7 +256,7 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
struct input_dev *dev = wacom->dev;
- int retval;
+ int retval, id;
switch (urb->status) {
case 0:
@@ -263,12 +280,15 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
input_regs(dev, regs);
if (data[1] & 0x04) {
- input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0);
+ input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
+ id = ERASER_DEVICE_ID;
} else {
- input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0);
+ input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+ id = STYLUS_DEVICE_ID;
}
+ input_report_abs(dev, ABS_MISC, id); /* report tool id */
input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2]));
input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[4]));
input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
@@ -312,7 +332,8 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs)
}
input_regs(dev, regs);
- input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID);
+ input_report_key(dev, BTN_TOOL_PEN, 1);
+ input_report_abs(dev, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1]));
input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3]));
input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127);
@@ -350,6 +371,8 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
goto exit;
}
+ if (data[0] == 99) return; /* for Volito tablets */
+
if (data[0] != 2) {
dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
goto exit;
@@ -374,10 +397,10 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
case 2: /* Mouse with wheel */
input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
if (wacom->features->type == WACOM_G4) {
- rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03);
- input_report_rel(dev, REL_WHEEL, rw);
+ rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
+ input_report_rel(dev, REL_WHEEL, -rw);
} else
- input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
+ input_report_rel(dev, REL_WHEEL, -(signed char) data[6]);
/* fall through */
case 3: /* Mouse without wheel */
@@ -406,39 +429,27 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
}
}
- input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0);
+ if (data[1] & 0x10)
+ input_report_abs(dev, ABS_MISC, id); /* report tool id */
+ else
+ input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
+ input_report_key(dev, wacom->tool[0], data[1] & 0x10);
input_sync(dev);
/* send pad data */
if (wacom->features->type == WACOM_G4) {
- /* fist time sending pad data */
- if (wacom->tool[1] != BTN_TOOL_FINGER) {
- wacom->id[1] = 0;
- wacom->serial[1] = (data[7] & 0x38) >> 2;
- }
- if (data[7] & 0xf8) {
+ if ((wacom->serial[1] & 0xc0) != (data[7] & 0xf8)) {
+ wacom->id[1] = 1;
+ wacom->serial[1] = (data[7] & 0xf8);
input_report_key(dev, BTN_0, (data[7] & 0x40));
input_report_key(dev, BTN_4, (data[7] & 0x80));
- if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e))
- /* alter REL_WHEEL value so X apps can get it */
- wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1;
- else
- wacom->serial[1] = (data[7] & 0x38 ) >> 2;
-
- /* don't alter the value when there is no wheel event */
- if (wacom->serial[1] == 1)
- wacom->serial[1] = 0;
- rw = wacom->serial[1];
- rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07);
+ rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
input_report_rel(dev, REL_WHEEL, rw);
- wacom->tool[1] = BTN_TOOL_FINGER;
- wacom->id[1] = data[7] & 0xf8;
- input_report_key(dev, wacom->tool[1], 0xf0);
+ input_report_key(dev, BTN_TOOL_FINGER, 0xf0);
input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
} else if (wacom->id[1]) {
wacom->id[1] = 0;
- wacom->serial[1] = 0;
- input_report_key(dev, wacom->tool[1], 0);
+ input_report_key(dev, BTN_TOOL_FINGER, 0);
input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
}
input_sync(dev);
@@ -516,21 +527,31 @@ static int wacom_intuos_inout(struct urb *urb)
default: /* Unknown tool */
wacom->tool[idx] = BTN_TOOL_PEN;
}
- input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
- input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
- input_sync(dev);
+ if(!((wacom->tool[idx] == BTN_TOOL_LENS) &&
+ ((wacom->features->type == INTUOS312)
+ || (wacom->features->type == INTUOS319)))) {
+ input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
+ input_report_key(dev, wacom->tool[idx], 1);
+ input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+ input_sync(dev);
+ }
return 1;
}
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
input_report_key(dev, wacom->tool[idx], 0);
+ input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);
return 1;
}
- return 0;
+ if((wacom->tool[idx] == BTN_TOOL_LENS) && ((wacom->features->type == INTUOS312)
+ || (wacom->features->type == INTUOS319)))
+ return 1;
+ else
+ return 0;
}
static void wacom_intuos_general(struct urb *urb)
@@ -600,10 +621,9 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
/* pad packets. Works as a second tool and is always in prox */
if (data[0] == 12) {
/* initiate the pad as a device */
- if (wacom->tool[1] != BTN_TOOL_FINGER) {
+ if (wacom->tool[1] != BTN_TOOL_FINGER)
wacom->tool[1] = BTN_TOOL_FINGER;
- input_report_key(dev, wacom->tool[1], 1);
- }
+
input_report_key(dev, BTN_0, (data[5] & 0x01));
input_report_key(dev, BTN_1, (data[5] & 0x02));
input_report_key(dev, BTN_2, (data[5] & 0x04));
@@ -614,6 +634,11 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
input_report_key(dev, BTN_7, (data[6] & 0x08));
input_report_abs(dev, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
input_report_abs(dev, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+
+ if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2])
+ input_report_key(dev, wacom->tool[1], 1);
+ else
+ input_report_key(dev, wacom->tool[1], 0);
input_event(dev, EV_MSC, MSC_SERIAL, 0xffffffff);
input_sync(dev);
goto exit;
@@ -676,8 +701,8 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
input_report_key(dev, BTN_LEFT, data[8] & 0x04);
input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
input_report_key(dev, BTN_RIGHT, data[8] & 0x10);
- input_report_rel(dev, REL_WHEEL, ((data[8] & 0x02) >> 1)
- - (data[8] & 0x01));
+ input_report_rel(dev, REL_WHEEL, (data[8] & 0x01)
+ - ((data[8] & 0x02) >> 1));
/* I3 2D mouse side buttons */
if (wacom->features->type == INTUOS3) {
@@ -695,7 +720,8 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
}
}
- input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
+ input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
+ input_report_key(dev, wacom->tool[idx], 1);
input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);
@@ -733,7 +759,8 @@ static struct wacom_features wacom_features[] = {
{ "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq },
{ "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq },
{ "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq },
- { "Wacom PL710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq },
+ { "Wacom DTU710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq },
+ { "Wacom DTF521", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq },
{ "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq },
{ "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
@@ -744,6 +771,8 @@ static struct wacom_features wacom_features[] = {
{ "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq },
+ { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS312, wacom_intuos_irq },
+ { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS319, wacom_intuos_irq },
{ "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
@@ -779,6 +808,7 @@ static struct usb_device_id wacom_ids[] = {
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC3) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
@@ -788,6 +818,8 @@ static struct usb_device_id wacom_ids[] = {
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
@@ -820,7 +852,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct input_dev *input_dev;
- char rep_data[2] = {0x02, 0x02};
+ char rep_data[2], limit = 0;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
input_dev = input_allocate_device();
@@ -857,6 +889,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
input_set_abs_params(input_dev, ABS_X, 0, wacom->features->x_max, 4, 0);
input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
+ input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
switch (wacom->features->type) {
case WACOM_G4:
@@ -875,6 +908,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
break;
case INTUOS3:
+ case INTUOS312:
+ case INTUOS319:
case CINTIQ:
input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
@@ -916,10 +951,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
input_register_device(wacom->dev);
- /* ask the tablet to report tablet data */
- usb_set_report(intf, 3, 2, rep_data, 2);
- /* repeat once (not sure why the first call often fails) */
- usb_set_report(intf, 3, 2, rep_data, 2);
+ /* Ask the tablet to report tablet data. Repeat until it succeeds */
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ usb_set_report(intf, 3, 2, rep_data, 2);
+ usb_get_report(intf, 3, 2, rep_data, 2);
+ } while (rep_data[1] != 2 && limit++ < 5);
usb_set_intfdata(intf, wacom);
return 0;
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 3824df33094e..1fd9cb85f4ca 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/delay.h>
#define MAX_INTEL_HEX_RECORD_LENGTH 16
typedef struct _INTEL_HEX_RECORD
@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev)
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
+ msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev)
goto wraperr;
}
}
+ msleep(250); /* let device settle */
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
+ msleep(250); /* let device settle */
/* return 1 to fail the driver inialization
* and give real driver change to load */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 52fea2e08db8..fe351371f274 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/delay.h>
#define MAX_INTEL_HEX_RECORD_LENGTH 16
typedef struct _INTEL_HEX_RECORD
@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev)
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
+ msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
+ msleep(250); /* let device settle */
/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
@@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
+ msleep(250); /* let device settle */
kfree(buf);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 9d59b901841c..ccc5e8238bd8 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -381,6 +381,7 @@ alloc_sglist (int nents, int max, int vary)
for (i = 0; i < nents; i++) {
char *buf;
+ unsigned j;
buf = kzalloc (size, SLAB_KERNEL);
if (!buf) {
@@ -391,6 +392,16 @@ alloc_sglist (int nents, int max, int vary)
/* kmalloc pages are always physically contiguous! */
sg_init_one(&sg[i], buf, size);
+ switch (pattern) {
+ case 0:
+ /* already zeroed */
+ break;
+ case 1:
+ for (j = 0; j < size; j++)
+ *buf++ = (u8) (j % 63);
+ break;
+ }
+
if (vary) {
size += vary;
size %= max;
@@ -425,6 +436,8 @@ static int perform_sglist (
usb_sg_wait (req);
retval = req->status;
+ /* FIXME check resulting data pattern */
+
/* FIXME if endpoint halted, clear halt (and log) */
}
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 3094970615cb..12b599a0b539 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -37,7 +37,6 @@
#include "usbnet.h"
-
/* ASIX AX8817X based USB 2.0 Ethernet Devices */
#define AX_CMD_SET_SW_MII 0x06
@@ -109,7 +108,7 @@
#define AX_EEPROM_MAGIC 0xdeadbeef
/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct ax8817x_data {
+struct asix_data {
u8 multi_filter[AX_MCAST_FILTER_SIZE];
};
@@ -121,7 +120,7 @@ struct ax88172_int_data {
u16 res3;
} __attribute__ ((packed));
-static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
return usb_control_msg(
@@ -136,7 +135,7 @@ static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
USB_CTRL_GET_TIMEOUT);
}
-static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
return usb_control_msg(
@@ -151,19 +150,80 @@ static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
USB_CTRL_SET_TIMEOUT);
}
-static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
+static void asix_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
{
struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
if (urb->status < 0)
- printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
+ printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
urb->status);
kfree(req);
usb_free_urb(urb);
}
-static void ax8817x_status(struct usbnet *dev, struct urb *urb)
+static inline int asix_set_sw_mii(struct usbnet *dev)
+{
+ int ret;
+ ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ devdbg(dev, "Failed to enable software MII access");
+ return ret;
+}
+
+static inline int asix_set_hw_mii(struct usbnet *dev)
+{
+ int ret;
+ ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ devdbg(dev, "Failed to enable hardware MII access");
+ return ret;
+}
+
+static inline int asix_get_phyid(struct usbnet *dev)
+{
+ int ret = 0;
+ void *buf;
+
+ buf = kmalloc(2, GFP_KERNEL);
+ if (!buf)
+ goto out1;
+
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
+ 0, 0, 2, buf)) < 2) {
+ devdbg(dev, "Error reading PHYID register: %02x", ret);
+ goto out2;
+ }
+ ret = *((u8 *)buf + 1);
+out2:
+ kfree(buf);
+out1:
+ return ret;
+}
+
+static int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+ int ret;
+
+ ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+ if (ret < 0)
+ devdbg(dev,"Failed to send software reset: %02x", ret);
+
+ return ret;
+}
+
+static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+ if (ret < 0)
+ devdbg(dev, "Failed to write RX_CTL mode: %02x", ret);
+
+ return ret;
+}
+
+static void asix_status(struct usbnet *dev, struct urb *urb)
{
struct ax88172_int_data *event;
int link;
@@ -179,12 +239,12 @@ static void ax8817x_status(struct usbnet *dev, struct urb *urb)
usbnet_defer_kevent (dev, EVENT_LINK_RESET );
} else
netif_carrier_off(dev->net);
- devdbg(dev, "ax8817x - Link Status is: %d", link);
+ devdbg(dev, "Link Status is: %d", link);
}
}
static void
-ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
u16 size, void *data)
{
struct usb_ctrlrequest *req;
@@ -211,7 +271,7 @@ ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
usb_fill_control_urb(urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0),
(void *)req, data, size,
- ax8817x_async_cmd_callback, req);
+ asix_async_cmd_callback, req);
if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
deverr(dev, "Error submitting the control message: status=%d",
@@ -221,10 +281,10 @@ ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
}
}
-static void ax8817x_set_multicast(struct net_device *net)
+static void asix_set_multicast(struct net_device *net)
{
struct usbnet *dev = netdev_priv(net);
- struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
+ struct asix_data *data = (struct asix_data *)&dev->data;
u8 rx_ctl = 0x8c;
if (net->flags & IFF_PROMISC) {
@@ -255,53 +315,51 @@ static void ax8817x_set_multicast(struct net_device *net)
mc_list = mc_list->next;
}
- ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+ asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
AX_MCAST_FILTER_SIZE, data->multi_filter);
rx_ctl |= 0x10;
}
- ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+ asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
}
-static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
+static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
{
struct usbnet *dev = netdev_priv(netdev);
u16 res;
- u8 buf[1];
- ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
- ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+ asix_set_sw_mii(dev);
+ asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
(__u16)loc, 2, (u16 *)&res);
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+ asix_set_hw_mii(dev);
return res & 0xffff;
}
/* same as above, but converts resulting value to cpu byte order */
-static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
+static int asix_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
{
- return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc));
+ return le16_to_cpu(asix_mdio_read(netdev,phy_id, loc));
}
static void
-ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
{
struct usbnet *dev = netdev_priv(netdev);
u16 res = val;
- u8 buf[1];
- ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+ asix_set_sw_mii(dev);
+ asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
(__u16)loc, 2, (u16 *)&res);
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+ asix_set_hw_mii(dev);
}
/* same as above, but converts new value to le16 byte order before writing */
static void
-ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
+asix_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
{
- ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
+ asix_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
}
static int ax88172_link_reset(struct usbnet *dev)
@@ -312,23 +370,23 @@ static int ax88172_link_reset(struct usbnet *dev)
u8 mode;
mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
- lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
- adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
res = mii_nway_result(lpa|adv);
if (res & LPA_DUPLEX)
mode |= AX_MEDIUM_FULL_DUPLEX;
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+ asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
return 0;
}
static void
-ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
u8 opt;
- if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
wolinfo->supported = 0;
wolinfo->wolopts = 0;
return;
@@ -344,7 +402,7 @@ ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
}
static int
-ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
{
struct usbnet *dev = netdev_priv(net);
u8 opt = 0;
@@ -357,19 +415,19 @@ ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
if (opt != 0)
opt |= AX_MONITOR_MODE;
- if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+ if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
opt, 0, 0, &buf) < 0)
return -EINVAL;
return 0;
}
-static int ax8817x_get_eeprom_len(struct net_device *net)
+static int asix_get_eeprom_len(struct net_device *net)
{
return AX_EEPROM_LEN;
}
-static int ax8817x_get_eeprom(struct net_device *net,
+static int asix_get_eeprom(struct net_device *net,
struct ethtool_eeprom *eeprom, u8 *data)
{
struct usbnet *dev = netdev_priv(net);
@@ -386,14 +444,14 @@ static int ax8817x_get_eeprom(struct net_device *net,
/* ax8817x returns 2 bytes from eeprom on read */
for (i=0; i < eeprom->len / 2; i++) {
- if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
+ if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
return -EINVAL;
}
return 0;
}
-static void ax8817x_get_drvinfo (struct net_device *net,
+static void asix_get_drvinfo (struct net_device *net,
struct ethtool_drvinfo *info)
{
/* Inherit standard device info */
@@ -401,14 +459,14 @@ static void ax8817x_get_drvinfo (struct net_device *net,
info->eedump_len = 0x3e;
}
-static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
return mii_ethtool_gset(&dev->mii,cmd);
}
-static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
@@ -418,27 +476,27 @@ static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
/* We need to override some ethtool_ops so we require our
own structure so we don't interfere with other usbnet
devices that may be connected at the same time. */
-static struct ethtool_ops ax8817x_ethtool_ops = {
- .get_drvinfo = ax8817x_get_drvinfo,
+static struct ethtool_ops ax88172_ethtool_ops = {
+ .get_drvinfo = asix_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
- .get_wol = ax8817x_get_wol,
- .set_wol = ax8817x_set_wol,
- .get_eeprom_len = ax8817x_get_eeprom_len,
- .get_eeprom = ax8817x_get_eeprom,
- .get_settings = ax8817x_get_settings,
- .set_settings = ax8817x_set_settings,
+ .get_wol = asix_get_wol,
+ .set_wol = asix_set_wol,
+ .get_eeprom_len = asix_get_eeprom_len,
+ .get_eeprom = asix_get_eeprom,
+ .get_settings = asix_get_settings,
+ .set_settings = asix_set_settings,
};
-static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
{
struct usbnet *dev = netdev_priv(net);
return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
}
-static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
+static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
{
int ret = 0;
void *buf;
@@ -455,55 +513,39 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
/* Toggle the GPIOs in a manufacturer/model specific way */
for (i = 2; i >= 0; i--) {
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
(gpio_bits >> (i * 8)) & 0xff, 0, 0,
buf)) < 0)
goto out2;
msleep(5);
}
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
- 0x80, 0, 0, buf)) < 0) {
- dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
+ if ((ret = asix_write_rx_ctl(dev,0x80)) < 0)
goto out2;
- }
/* Get the MAC address */
memset(buf, 0, ETH_ALEN);
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID,
+ if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
0, 0, 6, buf)) < 0) {
dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
goto out2;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
- /* Get the PHY id */
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
- 0, 0, 2, buf)) < 0) {
- dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
- goto out2;
- } else if (ret < 2) {
- /* this should always return 2 bytes */
- dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
- ret);
- ret = -EIO;
- goto out2;
- }
-
/* Initialize MII structure */
dev->mii.dev = dev->net;
- dev->mii.mdio_read = ax8817x_mdio_read;
- dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.mdio_read = asix_mdio_read;
+ dev->mii.mdio_write = asix_mdio_write;
dev->mii.phy_id_mask = 0x3f;
dev->mii.reg_num_mask = 0x1f;
- dev->mii.phy_id = *((u8 *)buf + 1);
- dev->net->do_ioctl = ax8817x_ioctl;
+ dev->mii.phy_id = asix_get_phyid(dev);
+ dev->net->do_ioctl = asix_ioctl;
- dev->net->set_multicast_list = ax8817x_set_multicast;
- dev->net->ethtool_ops = &ax8817x_ethtool_ops;
+ dev->net->set_multicast_list = asix_set_multicast;
+ dev->net->ethtool_ops = &ax88172_ethtool_ops;
- ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
mii_nway_restart(&dev->mii);
@@ -515,16 +557,16 @@ out1:
}
static struct ethtool_ops ax88772_ethtool_ops = {
- .get_drvinfo = ax8817x_get_drvinfo,
+ .get_drvinfo = asix_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
- .get_wol = ax8817x_get_wol,
- .set_wol = ax8817x_set_wol,
- .get_eeprom_len = ax8817x_get_eeprom_len,
- .get_eeprom = ax8817x_get_eeprom,
- .get_settings = ax8817x_get_settings,
- .set_settings = ax8817x_set_settings,
+ .get_wol = asix_get_wol,
+ .set_wol = asix_set_wol,
+ .get_eeprom_len = asix_get_eeprom_len,
+ .get_eeprom = asix_get_eeprom,
+ .get_settings = asix_get_settings,
+ .set_settings = asix_set_settings,
};
static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -541,62 +583,45 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
goto out1;
}
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+ if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
0x00B0, 0, 0, buf)) < 0)
goto out2;
msleep(5);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
+ if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
0x0001, 0, 0, buf)) < 0) {
dbg("Select PHY #1 failed: %d", ret);
goto out2;
}
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD,
- 0, 0, buf)) < 0) {
- dbg("Failed to power down internal PHY: %d", ret);
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD)) < 0)
goto out2;
- }
msleep(150);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR,
- 0, 0, buf)) < 0) {
- dbg("Failed to perform software reset: %d", ret);
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_CLEAR)) < 0)
goto out2;
- }
msleep(150);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
- AX_SWRESET_IPRL | AX_SWRESET_PRL,
- 0, 0, buf)) < 0) {
- dbg("Failed to set Internal/External PHY reset control: %d",
- ret);
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
goto out2;
- }
msleep(150);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
- 0x0000, 0, 0, buf)) < 0) {
- dbg("Failed to reset RX_CTL: %d", ret);
+ if ((ret = asix_write_rx_ctl(dev, 0x00)) < 0)
goto out2;
- }
/* Get the MAC address */
memset(buf, 0, ETH_ALEN);
- if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
+ if ((ret = asix_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
0, 0, ETH_ALEN, buf)) < 0) {
dbg("Failed to read MAC address: %d", ret);
goto out2;
}
memcpy(dev->net->dev_addr, buf, ETH_ALEN);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII,
- 0, 0, 0, buf)) < 0) {
- dbg("Enabling software MII failed: %d", ret);
+ if ((ret = asix_set_sw_mii(dev)) < 0)
goto out2;
- }
- if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG,
+ if (((ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG,
0x0010, 2, 2, buf)) < 0)
|| (*((u16 *)buf) != 0x003b)) {
dbg("Read PHY register 2 must be 0x3b00: %d", ret);
@@ -605,74 +630,49 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
/* Initialize MII structure */
dev->mii.dev = dev->net;
- dev->mii.mdio_read = ax8817x_mdio_read;
- dev->mii.mdio_write = ax8817x_mdio_write;
+ dev->mii.mdio_read = asix_mdio_read;
+ dev->mii.mdio_write = asix_mdio_write;
dev->mii.phy_id_mask = 0xff;
dev->mii.reg_num_mask = 0xff;
- dev->net->do_ioctl = ax8817x_ioctl;
+ dev->net->do_ioctl = asix_ioctl;
+ dev->mii.phy_id = asix_get_phyid(dev);
- /* Get the PHY id */
- if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
- 0, 0, 2, buf)) < 0) {
- dbg("Error reading PHY ID: %02x", ret);
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
goto out2;
- } else if (ret < 2) {
- /* this should always return 2 bytes */
- dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
- ret);
- ret = -EIO;
- goto out2;
- }
- dev->mii.phy_id = *((u8 *)buf + 1);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL,
- 0, 0, buf)) < 0) {
- dbg("Set external PHY reset pin level: %d", ret);
- goto out2;
- }
msleep(150);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
- AX_SWRESET_IPRL | AX_SWRESET_PRL,
- 0, 0, buf)) < 0) {
- dbg("Set Internal/External PHY reset control: %d", ret);
+
+ if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
goto out2;
- }
- msleep(150);
+ msleep(150);
- dev->net->set_multicast_list = ax8817x_set_multicast;
+ dev->net->set_multicast_list = asix_set_multicast;
dev->net->ethtool_ops = &ax88772_ethtool_ops;
- ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
- ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_CSMA);
mii_nway_restart(&dev->mii);
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+ if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
dbg("Write medium mode register: %d", ret);
goto out2;
}
- if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0,
+ if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
goto out2;
}
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
- dbg("Failed to set hardware MII: %02x", ret);
+ if ((ret = asix_set_hw_mii(dev)) < 0)
goto out2;
- }
/* Set RX_CTL to default values with 2k buffer, and enable cactus */
- if ((ret =
- ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
- buf)) < 0) {
- dbg("Reset RX_CTL failed: %d", ret);
+ if ((ret = asix_write_rx_ctl(dev, 0x0088)) < 0)
goto out2;
- }
kfree(buf);
@@ -794,23 +794,23 @@ static int ax88772_link_reset(struct usbnet *dev)
u16 mode;
mode = AX88772_MEDIUM_DEFAULT;
- lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
- adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+ lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+ adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
res = mii_nway_result(lpa|adv);
if ((res & LPA_DUPLEX) == 0)
mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
if ((res & LPA_100) == 0)
mode &= ~AX88772_MEDIUM_100MB;
- ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+ asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
return 0;
}
static const struct driver_info ax8817x_info = {
.description = "ASIX AX8817x USB 2.0 Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
+ .bind = ax88172_bind,
+ .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
.flags = FLAG_ETHER,
@@ -819,8 +819,8 @@ static const struct driver_info ax8817x_info = {
static const struct driver_info dlink_dub_e100_info = {
.description = "DLink DUB-E100 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
+ .bind = ax88172_bind,
+ .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
.flags = FLAG_ETHER,
@@ -829,8 +829,8 @@ static const struct driver_info dlink_dub_e100_info = {
static const struct driver_info netgear_fa120_info = {
.description = "Netgear FA-120 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
+ .bind = ax88172_bind,
+ .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
.flags = FLAG_ETHER,
@@ -839,8 +839,8 @@ static const struct driver_info netgear_fa120_info = {
static const struct driver_info hawking_uf200_info = {
.description = "Hawking UF200 USB Ethernet",
- .bind = ax8817x_bind,
- .status = ax8817x_status,
+ .bind = ax88172_bind,
+ .status = asix_status,
.link_reset = ax88172_link_reset,
.reset = ax88172_link_reset,
.flags = FLAG_ETHER,
@@ -850,13 +850,12 @@ static const struct driver_info hawking_uf200_info = {
static const struct driver_info ax88772_info = {
.description = "ASIX AX88772 USB 2.0 Ethernet",
.bind = ax88772_bind,
- .status = ax8817x_status,
+ .status = asix_status,
.link_reset = ax88772_link_reset,
.reset = ax88772_link_reset,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88772_rx_fixup,
.tx_fixup = ax88772_tx_fixup,
- .data = 0x00130103,
};
static const struct usb_device_id products [] = {
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 5b6675684567..7683926a1b6f 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -262,7 +262,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
usb_sndctrlpipe(pegasus->usb, 0),
(char *) &pegasus->dr,
- &tmp, 1, ctrl_callback, pegasus);
+ tmp, 1, ctrl_callback, pegasus);
add_wait_queue(&pegasus->ctrl_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
set_register(pegasus, PhyCtrl, (indx | PHY_READ));
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
+ if (ret == -ESHUTDOWN)
+ goto fail;
if (data[0] & PHY_DONE)
break;
}
@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
*regd = le16_to_cpu(regdi);
return ret;
}
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
+ if (ret == -ESHUTDOWN)
+ goto fail;
if (data[0] & PHY_DONE)
break;
}
if (i < REG_TIMEOUT)
return ret;
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
if (tmp & EPROM_DONE)
break;
+ if (ret == -ESHUTDOWN)
+ goto fail;
}
if (i < REG_TIMEOUT) {
ret = get_registers(pegasus, EpromData, 2, &retdatai);
@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
return ret;
}
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+ if (ret == -ESHUTDOWN)
+ goto fail;
if (tmp & EPROM_DONE)
break;
}
disable_eprom_write(pegasus);
if (i < REG_TIMEOUT)
return ret;
+fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
struct pegasus *pegasus = usb_get_intfdata(intf);
netif_device_detach (pegasus->net);
+ cancel_delayed_work(&pegasus->carrier_check);
if (netif_running(pegasus->net)) {
- cancel_delayed_work(&pegasus->carrier_check);
-
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->intr_urb);
}
@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf)
pegasus->intr_urb->status = 0;
pegasus->intr_urb->actual_length = 0;
intr_callback(pegasus->intr_urb, NULL);
-
- queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
- CARRIER_CHECK_DELAY);
}
+ queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+ CARRIER_CHECK_DELAY);
return 0;
}
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index 49991ac1bf3b..94ddfe16fdda 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -39,6 +39,20 @@
* RNDIS is NDIS remoted over USB. It's a MSFT variant of CDC ACM ... of
* course ACM was intended for modems, not Ethernet links! USB's standard
* for Ethernet links is "CDC Ethernet", which is significantly simpler.
+ *
+ * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete. Issues
+ * include:
+ * - Power management in particular relies on information that's scattered
+ * through other documentation, and which is incomplete or incorrect even
+ * there.
+ * - There are various undocumented protocol requirements, such as the
+ * need to send unused garbage in control-OUT messages.
+ * - In some cases, MS-Windows will emit undocumented requests; this
+ * matters more to peripheral implementations than host ones.
+ *
+ * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
+ * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
+ * currently rare) "Ethernet Emulation Model" (EEM).
*/
/*
@@ -72,17 +86,17 @@ struct rndis_msg_hdr {
*/
#define RNDIS_MSG_PACKET ccpu2(0x00000001) /* 1-N packets */
#define RNDIS_MSG_INIT ccpu2(0x00000002)
-#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INIT_C (RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_HALT ccpu2(0x00000003)
#define RNDIS_MSG_QUERY ccpu2(0x00000004)
-#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_QUERY_C (RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_SET ccpu2(0x00000005)
-#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET_C (RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_RESET ccpu2(0x00000006)
-#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET_C (RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
#define RNDIS_MSG_INDICATE ccpu2(0x00000007)
#define RNDIS_MSG_KEEPALIVE ccpu2(0x00000008)
-#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_KEEPALIVE_C (RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
/* codes for "status" field of completion messages */
#define RNDIS_STATUS_SUCCESS ccpu2(0x00000000)
@@ -596,13 +610,13 @@ static struct usb_driver rndis_driver = {
static int __init rndis_init(void)
{
- return usb_register(&rndis_driver);
+ return usb_register(&rndis_driver);
}
module_init(rndis_init);
static void __exit rndis_exit(void)
{
- usb_deregister(&rndis_driver);
+ usb_deregister(&rndis_driver);
}
module_exit(rndis_exit);
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 5a8a2c91c2b2..5c60be521561 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
To compile this driver as a module, choose M here: the
module will be called anydata.
+config USB_SERIAL_ARK3116
+ tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a ARK Micro 3116 USB to Serial
+ device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ark3116
+
config USB_SERIAL_BELKIN
tristate "USB Belkin and Peracom Single Port Serial Driver"
depends on USB_SERIAL
@@ -158,6 +168,15 @@ config USB_SERIAL_FTDI_SIO
To compile this driver as a module, choose M here: the
module will be called ftdi_sio.
+config USB_SERIAL_FUNSOFT
+ tristate "USB Fundamental Software Dongle Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use the Fundamental Software dongle.
+
+ To compile this driver as a module, choose M here: the
+ module will be called funsoft.
+
config USB_SERIAL_VISOR
tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f7fe4172efed..5a0960fc9d3e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -13,6 +13,7 @@ usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o
+obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
@@ -22,6 +23,7 @@ obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o
obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o
obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o
obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o
+obj-$(CONFIG_USB_SERIAL_FUNSOFT) += funsoft.o
obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o
obj-$(CONFIG_USB_SERIAL_HP4X) += hp4x.o
obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index dbf1f063098c..694b205f9b73 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,6 +18,7 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0xf3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */
{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
new file mode 100644
index 000000000000..8dec796222a0
--- /dev/null
+++ b/drivers/usb/serial/ark3116.c
@@ -0,0 +1,465 @@
+/*
+ * ark3116
+ * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
+ * productid=0x0232) (used in a datacable called KQ-U8A)
+ *
+ * - based on code by krisfx -> thanks !!
+ * (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
+ *
+ * - based on logs created by usbsnoopy
+ *
+ * Author : Simon Schulz [ark3116_driver<AT>auctionant.de]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x6547, 0x0232) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ark3116_private {
+ spinlock_t lock;
+ u8 termios_initialized;
+};
+
+static inline void ARK3116_SND(struct usb_serial *serial, int seq,
+ __u8 request, __u8 requesttype,
+ __u16 value, __u16 index)
+{
+ int result;
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev,0),
+ request, requesttype, value, index,
+ NULL,0x00, 1000);
+ dbg("%03d > ok",seq);
+}
+
+static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
+ __u8 request, __u8 requesttype,
+ __u16 value, __u16 index, __u8 expected,
+ char *buf)
+{
+ int result;
+ result = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev,0),
+ request, requesttype, value, index,
+ buf, 0x0000001, 1000);
+ if (result)
+ dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+ else
+ dbg("%03d < 0 bytes", seq);
+}
+
+
+static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
+ __u8 request, __u8 requesttype,
+ __u16 value, __u16 index, char *buf)
+{
+ usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev,0),
+ request, requesttype, value, index,
+ buf, 0x0000001, 1000);
+}
+
+
+static int ark3116_attach(struct usb_serial *serial)
+{
+ char *buf;
+ struct ark3116_private *priv;
+ int i;
+
+ for (i = 0; i < serial->num_ports; ++i) {
+ priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+ if (!priv)
+ goto cleanup;
+ memset (priv, 0x00, sizeof (struct ark3116_private));
+ spin_lock_init(&priv->lock);
+
+ usb_set_serial_port_data(serial->port[i], priv);
+ }
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc -> out of mem ?");
+ goto cleanup;
+ }
+
+ /* 3 */
+ ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
+ ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
+ ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
+ ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+
+ /* <-- seq7 */
+ ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
+ ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
+ ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
+ ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
+ ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+
+ /* <-- seq12 */
+ ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+
+ /* 14 */
+ ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+
+ /* 16 */
+ ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+ /* --> seq17 */
+ ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+
+ /* <-- seq18 */
+ ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+ /* --> seq19 */
+ ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
+
+
+ /* <-- seq20 */
+ /* seems like serial port status info (RTS, CTS,...) */
+ /* returns modem control line status ?! */
+ ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+ /* set 9600 baud & do some init ?! */
+ ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+ ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
+ ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
+ ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+ ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+ ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+ ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+ ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+
+ kfree(buf);
+ return(0);
+
+cleanup:
+ for (--i; i>=0; --i)
+ usb_set_serial_port_data(serial->port[i], NULL);
+ return -ENOMEM;
+}
+
+static void ark3116_set_termios(struct usb_serial_port *port,
+ struct termios *old_termios)
+{
+ struct usb_serial *serial = port->serial;
+ struct ark3116_private *priv = usb_get_serial_port_data(port);
+ unsigned int cflag = port->tty->termios->c_cflag;
+ unsigned long flags;
+ int baud;
+ int ark3116_baud;
+ char *buf;
+ char config;
+
+ config = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if ((!port->tty) || (!port->tty->termios)) {
+ dbg("%s - no tty structures", __FUNCTION__);
+ return;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!priv->termios_initialized) {
+ *(port->tty->termios) = tty_std_termios;
+ port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ priv->termios_initialized = 1;
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ cflag = port->tty->termios->c_cflag;
+
+ /* check that they really want us to change something: */
+ if (old_termios) {
+ if ((cflag == old_termios->c_cflag) &&
+ (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+ RELEVANT_IFLAG(old_termios->c_iflag))) {
+ dbg("%s - nothing to change...", __FUNCTION__);
+ return;
+ }
+ }
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc");
+ return;
+ }
+
+ /* set data bit count (8/7/6/5) */
+ if (cflag & CSIZE){
+ switch (cflag & CSIZE){
+ case CS5:
+ config |= 0x00;
+ dbg("setting CS5");
+ break;
+ case CS6:
+ config |= 0x01;
+ dbg("setting CS6");
+ break;
+ case CS7:
+ config |= 0x02;
+ dbg("setting CS7");
+ break;
+ default:
+ err ("CSIZE was set but not CS5-CS8, using CS8!");
+ case CS8:
+ config |= 0x03;
+ dbg("setting CS8");
+ break;
+ }
+ }
+
+ /* set parity (NONE,EVEN,ODD) */
+ if (cflag & PARENB){
+ if (cflag & PARODD) {
+ config |= 0x08;
+ dbg("setting parity to ODD");
+ } else {
+ config |= 0x18;
+ dbg("setting parity to EVEN");
+ }
+ } else {
+ dbg("setting parity to NONE");
+ }
+
+ /* SET STOPBIT (1/2) */
+ if (cflag & CSTOPB) {
+ config |= 0x04;
+ dbg ("setting 2 stop bits");
+ } else {
+ dbg ("setting 1 stop bit");
+ }
+
+
+ /* set baudrate: */
+ baud = 0;
+ switch (cflag & CBAUD){
+ case B0:
+ err("can't set 0baud, using 9600 instead");
+ break;
+ case B75: baud = 75; break;
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B1800: baud = 1800; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ case B57600: baud = 57600; break;
+ case B115200: baud = 115200; break;
+ case B230400: baud = 230400; break;
+ case B460800: baud = 460800; break;
+ default:
+ dbg("does not support the baudrate requested (fix it)");
+ break;
+ }
+
+ /* set 9600 as default (if given baudrate is invalid for example) */
+ if (baud == 0)
+ baud = 9600;
+
+ /*
+ * found by try'n'error, be careful, maybe there are other options
+ * for multiplicator etc!
+ */
+ if (baud == 460800)
+ /* strange, for 460800 the formula is wrong
+ * (dont use round(), then 9600baud is wrong) */
+ ark3116_baud = 7;
+ else
+ ark3116_baud = 3000000 / baud;
+
+ /* ? */
+ ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+ /* offset = buf[0]; */
+ /* offset = 0x03; */
+ /* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
+
+
+ /* set baudrate */
+ dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
+ ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+ ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000);
+ ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
+ ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+
+ /* ? */
+ ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+ ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+
+ /* set data bit count, stop bit count & parity: */
+ dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
+ ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+ ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+
+ if (cflag & CRTSCTS)
+ dbg("CRTSCTS not supported by chipset ?!");
+
+ /* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+
+ kfree(buf);
+ return;
+}
+
+static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+{
+ struct termios tmp_termios;
+ struct usb_serial *serial = port->serial;
+ char *buf;
+ int result = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc -> out of mem ?");
+ return -ENOMEM;
+ }
+
+ result = usb_serial_generic_open(port, filp);
+ if (result)
+ return result;
+
+ /* open */
+ ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+
+ ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
+ ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
+ ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
+ ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+
+ ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
+ ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+
+ ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
+ ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+
+ ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+
+ ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+
+ ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+ ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+
+ /* returns different values (control lines ?!) */
+ ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+ /* initialise termios: */
+ if (port->tty)
+ ark3116_set_termios(port, &tmp_termios);
+
+ kfree(buf);
+
+ return result;
+
+}
+
+static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ dbg("ioctl not supported yet...");
+ return -ENOIOCTLCMD;
+}
+
+static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+ struct usb_serial *serial = port->serial;
+ char *buf;
+ char temp;
+
+ /* seems like serial port status info (RTS, CTS,...) is stored
+ * in reg(?) 0x0006
+ * pcb connection point 11 = GND -> sets bit4 of response
+ * pcb connection point 7 = GND -> sets bit6 of response
+ */
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf) {
+ dbg("error kmalloc");
+ return -ENOMEM;
+ }
+
+ /* read register: */
+ ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+ temp = buf[0];
+ kfree(buf);
+
+ /* i do not really know if bit4=CTS and bit6=DSR... was just a
+ * quick guess !!
+ */
+ return (temp & (1<<4) ? TIOCM_CTS : 0) |
+ (temp & (1<<6) ? TIOCM_DSR : 0);
+}
+
+static struct usb_driver ark3116_driver = {
+ .name = "ark3116",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static struct usb_serial_driver ark3116_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ark3116",
+ },
+ .id_table = id_table,
+ .num_interrupt_in = 1,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .attach = ark3116_attach,
+ .set_termios = ark3116_set_termios,
+ .ioctl = ark3116_ioctl,
+ .tiocmget = ark3116_tiocmget,
+ .open = ark3116_open,
+};
+
+static int __init ark3116_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&ark3116_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&ark3116_driver);
+ if (retval)
+ usb_serial_deregister(&ark3116_device);
+ return retval;
+}
+
+static void __exit ark3116_exit(void)
+{
+ usb_deregister(&ark3116_driver);
+ usb_serial_deregister(&ark3116_device);
+}
+
+module_init(ark3116_init);
+module_exit(ark3116_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 167f8ec56131..8023bb7279b1 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -54,7 +54,7 @@ static struct console usbcons;
* serial.c code, except that the specifier is "ttyUSB" instead
* of "ttyS".
*/
-static int __init usb_console_setup(struct console *co, char *options)
+static int usb_console_setup(struct console *co, char *options)
{
struct usbcons_info *info = &usbcons_info;
int baud = 9600;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f3af81b4dd29..986d7622273d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -307,7 +307,9 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
static struct usb_device_id id_table_combined [] = {
+ { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
@@ -489,10 +491,15 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8da773c2744d..d69a917e768f 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -32,6 +32,10 @@
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID 0xF2D0
+
+
/* www.irtrans.de device */
#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
@@ -39,6 +43,9 @@
/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
@@ -153,6 +160,11 @@
#define ICOM_ID1_PID 0x0004
/*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
+
+/*
* DSS-20 Sync Station for Sony Ericsson P800
*/
@@ -399,6 +411,31 @@
#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID 0x5050 /* Vendor ID */
+#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
new file mode 100644
index 000000000000..803721b97e2e
--- /dev/null
+++ b/drivers/usb/serial/funsoft.c
@@ -0,0 +1,65 @@
+/*
+ * Funsoft Serial USB driver
+ *
+ * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x1404, 0xcddc) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver funsoft_driver = {
+ .name = "funsoft",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver funsoft_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "funsoft",
+ },
+ .id_table = id_table,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1,
+};
+
+static int __init funsoft_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&funsoft_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&funsoft_driver);
+ if (retval)
+ usb_serial_deregister(&funsoft_device);
+ return retval;
+}
+
+static void __exit funsoft_exit(void)
+{
+ usb_deregister(&funsoft_driver);
+ usb_serial_deregister(&funsoft_device);
+}
+
+module_init(funsoft_init);
+module_exit(funsoft_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 476cda107f4f..c62cc2876519 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
return result;
}
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
static void generic_cleanup (struct usb_serial_port *port)
{
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 4d40704dea2c..238033a87092 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
return (0);
}
- spin_lock(&port->lock);
- if (port->write_urb_busy) {
- spin_unlock(&port->lock);
+ spin_lock(&wport->lock);
+ if (wport->write_urb_busy) {
+ spin_unlock(&wport->lock);
dbg("%s - already writing", __FUNCTION__);
return 0;
}
- port->write_urb_busy = 1;
- spin_unlock(&port->lock);
+ wport->write_urb_busy = 1;
+ spin_unlock(&wport->lock);
count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
@@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
wport->write_urb->dev = serial->dev;
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
- port->write_urb_busy = 0;
+ wport->write_urb_busy = 0;
err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
} else
result = count;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index b3014fda645c..c96714bb1cb8 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -61,6 +61,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+ { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
@@ -78,6 +79,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+ { USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 77901d143979..7f29e81d3e35 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -26,6 +26,7 @@
#define ITEGNO_VENDOR_ID 0x0eba
#define ITEGNO_PRODUCT_ID 0x1080
+#define ITEGNO_PRODUCT_ID_2080 0x2080
#define MA620_VENDOR_ID 0x0df7
#define MA620_PRODUCT_ID 0x0620
@@ -79,3 +80,7 @@
/* USB GSM cable from Speed Dragon Multimedia, Ltd */
#define SPEEDDRAGON_VENDOR_ID 0x0e55
#define SPEEDDRAGON_PRODUCT_ID 0x110b
+
+/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
+#define OTI_VENDOR_ID 0x0ea0
+#define OTI_PRODUCT_ID 0x6858
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 097f4e8488fe..9c36f0ece20f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -27,10 +27,10 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
-#include <asm/semaphore.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include "pl2303.h"
@@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
portNumber = tty->index - serial->minor;
port = serial->port[portNumber];
- if (!port)
- return -ENODEV;
+ if (!port) {
+ retval = -ENODEV;
+ goto bailout_kref_put;
+ }
- if (down_interruptible(&port->sem))
- return -ERESTARTSYS;
+ if (mutex_lock_interruptible(&port->mutex)) {
+ retval = -ERESTARTSYS;
+ goto bailout_kref_put;
+ }
++port->open_count;
@@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
* safe because we are called with BKL held */
if (!try_module_get(serial->type->driver.owner)) {
retval = -ENODEV;
- goto bailout_kref_put;
+ goto bailout_mutex_unlock;
}
/* only call the device specific open if this
@@ -219,15 +223,16 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
goto bailout_module_put;
}
- up(&port->sem);
+ mutex_unlock(&port->mutex);
return 0;
bailout_module_put:
module_put(serial->type->driver.owner);
+bailout_mutex_unlock:
+ port->open_count = 0;
+ mutex_unlock(&port->mutex);
bailout_kref_put:
kref_put(&serial->kref, destroy_serial);
- port->open_count = 0;
- up(&port->sem);
return retval;
}
@@ -240,10 +245,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
dbg("%s - port %d", __FUNCTION__, port->number);
- down(&port->sem);
+ mutex_lock(&port->mutex);
if (port->open_count == 0) {
- up(&port->sem);
+ mutex_unlock(&port->mutex);
return;
}
@@ -262,7 +267,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
module_put(port->serial->type->driver.owner);
}
- up(&port->sem);
+ mutex_unlock(&port->mutex);
kref_put(&port->serial->kref, destroy_serial);
}
@@ -783,7 +788,7 @@ int usb_serial_probe(struct usb_interface *interface,
port->number = i + serial->minor;
port->serial = serial;
spin_lock_init(&port->lock);
- sema_init(&port->sem, 1);
+ mutex_init(&port->mutex);
INIT_WORK(&port->work, usb_serial_port_softint, port);
serial->port[i] = port;
}
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index d7d27c3385b3..dc89d8710460 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -16,7 +16,7 @@
#include <linux/config.h>
#include <linux/kref.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#define SERIAL_TTY_MAJOR 188 /* Nice legal number now */
#define SERIAL_TTY_MINORS 255 /* loads of devices :) */
@@ -31,7 +31,7 @@
* @serial: pointer back to the struct usb_serial owner of this port.
* @tty: pointer to the corresponding tty for this port.
* @lock: spinlock to grab when updating portions of this structure.
- * @sem: semaphore used to synchronize serial_open() and serial_close()
+ * @mutex: mutex used to synchronize serial_open() and serial_close()
* access for this port.
* @number: the number of the port (the minor number).
* @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
@@ -63,7 +63,7 @@ struct usb_serial_port {
struct usb_serial * serial;
struct tty_struct * tty;
spinlock_t lock;
- struct semaphore sem;
+ struct mutex mutex;
unsigned char number;
unsigned char * interrupt_in_buffer;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 557411c6e7c7..f806553cd9a4 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -508,6 +508,7 @@ no_firmware:
err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
err("%s: please contact support@connecttech.com\n", serial->type->description);
+ kfree(result);
return -ENODEV;
no_command_private:
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 92be101feba7..be9eec225743 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -48,7 +48,8 @@ config USB_STORAGE_FREECOM
config USB_STORAGE_ISD200
bool "ISD-200 USB/ATA Bridge support"
- depends on USB_STORAGE && BLK_DEV_IDE
+ depends on USB_STORAGE
+ depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
---help---
Say Y here if you want to use USB Mass Store devices based
on the In-Systems Design ISD-200 USB/ATA bridge.
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c4a9dcff5f2b..aec5ea8682d5 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -411,7 +411,7 @@ UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
UNUSUAL_DEV( 0x0525, 0xa140, 0x0100, 0x0100,
"Iomega",
"USB Clik! 40",
- US_SC_8070, US_PR_BULK, NULL,
+ US_SC_8070, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Yakumo Mega Image 37
@@ -773,6 +773,13 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
+UNUSUAL_DEV( 0x0727, 0x0306, 0x0100, 0x0100,
+ "ATMEL",
+ "SND1 Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
+
/* Submitted by Roman Hodek <roman@hodek.net> */
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk",
OpenPOWER on IntegriCloud