summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig10
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/cp210x.c2
-rw-r--r--drivers/usb/serial/digi_acceleport.c7
-rw-r--r--drivers/usb/serial/ftdi_sio.c3
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h12
-rw-r--r--drivers/usb/serial/io_ti.c7
-rw-r--r--drivers/usb/serial/option.c11
-rw-r--r--drivers/usb/serial/pl2303.c13
-rw-r--r--drivers/usb/serial/sierra.c9
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c7
-rw-r--r--drivers/usb/serial/usb-serial-simple.c19
-rw-r--r--drivers/usb/serial/xsens_mt.c25
-rw-r--r--drivers/usb/serial/zte_ev.c297
14 files changed, 69 insertions, 354 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 3ce5c74b29e4..a69f7cd9d0bf 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -58,9 +58,11 @@ config USB_SERIAL_SIMPLE
handles a wide range of very simple devices, all in one
driver. Specifically, it supports:
- Suunto ANT+ USB device.
+ - Medtronic CareLink USB device
- Fundamental Software dongle.
- HP4x calculators
- a number of Motorola phones
+ - Novatel Wireless GPS receivers
- Siemens USB/MPI adapter.
- ViVOtech ViVOpay USB device.
- Infineon Modem Flashloader USB interface
@@ -682,14 +684,6 @@ config USB_SERIAL_WISHBONE
To compile this driver as a module, choose M here: the
module will be called wishbone-serial.
-config USB_SERIAL_ZTE
- tristate "ZTE USB serial driver"
- help
- Say Y here if you want to use a ZTE USB to serial device.
-
- To compile this driver as a module, choose M here: the
- module will be called zte.
-
config USB_SERIAL_SSU100
tristate "USB Quatech SSU-100 Single Port Serial Driver"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index bfdafd349441..349d9df0895f 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -60,4 +60,3 @@ obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o
obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o
obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o
obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o
-obj-$(CONFIG_USB_SERIAL_ZTE) += zte_ev.o
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb62225cb9..eca1747ca8c7 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -122,6 +122,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -155,6 +156,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 8a23c53b946e..12b0e67473ba 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -834,7 +834,6 @@ static void digi_set_termios(struct tty_struct *tty,
arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
} else {
arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
- tty->hw_stopped = 0;
}
buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
@@ -1500,15 +1499,11 @@ static int digi_read_oob_callback(struct urb *urb)
if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
priv->dp_modem_signals |= TIOCM_CTS;
/* port must be open to use tty struct */
- if (rts) {
- tty->hw_stopped = 0;
+ if (rts)
tty_port_tty_wakeup(&port->port);
- }
} else {
priv->dp_modem_signals &= ~TIOCM_CTS;
/* port must be open to use tty struct */
- if (rts)
- tty->hw_stopped = 1;
}
if (val & DIGI_READ_INPUT_SIGNALS_DSR)
priv->dp_modem_signals |= TIOCM_DSR;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 824ea5e7ec8b..dc72b924c399 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -728,6 +728,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+ { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
@@ -939,6 +940,8 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
/* Infineon Devices */
{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+ /* GE Healthcare devices */
+ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 70b0b1d88ae9..5937b2d242f2 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -837,6 +837,12 @@
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
/*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID 0x1a28
+#define NOVITUS_BONO_E_PID 0x6010
+
+/*
* RT Systems programming cables for various ham radios
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
@@ -1385,3 +1391,9 @@
* ekey biometric systems GmbH (http://ekey.net/)
*/
#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */
+
+/*
+ * GE Healthcare devices
+ */
+#define GE_HEALTHCARE_VID 0x1901
+#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c0a42e9e6777..ddbb8fe1046d 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1456,12 +1456,8 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
tty = tty_port_tty_get(&edge_port->port->port);
/* handle CTS flow control */
if (tty && C_CRTSCTS(tty)) {
- if (msr & EDGEPORT_MSR_CTS) {
- tty->hw_stopped = 0;
+ if (msr & EDGEPORT_MSR_CTS)
tty_wakeup(tty);
- } else {
- tty->hw_stopped = 1;
- }
}
tty_kref_put(tty);
}
@@ -2177,7 +2173,6 @@ static void change_port_settings(struct tty_struct *tty,
dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
} else {
dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
- tty->hw_stopped = 0;
restart_read(edge_port);
}
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 54a8120897a6..d1a3f6044c8a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -276,6 +276,7 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_AC2726 0xfff1
+#define ZTE_PRODUCT_MG880 0xfffd
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
#define ZTE_PRODUCT_AC8710T 0xffff
#define ZTE_PRODUCT_MC2718 0xffe8
@@ -1560,7 +1561,15 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
-
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e9bad928039f..0f872e6b2c87 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -162,6 +162,9 @@ static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
.max_baud_rate = 1228800,
.quirks = PL2303_QUIRK_LEGACY,
},
+ [TYPE_HX] = {
+ .max_baud_rate = 12000000,
+ },
};
static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
@@ -395,16 +398,14 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty,
if (spriv->type->max_baud_rate)
baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
/*
- * Set baud rate to nearest supported value.
- *
- * NOTE: Baud rate 500k can only be set using divisors.
+ * Use direct method for supported baud rates, otherwise use divisors.
*/
baud_sup = pl2303_get_supported_baud_rate(baud);
- if (baud == 500000)
- baud = pl2303_encode_baud_rate_divisor(buf, baud);
+ if (baud == baud_sup)
+ baud = pl2303_encode_baud_rate_direct(buf, baud);
else
- baud = pl2303_encode_baud_rate_direct(buf, baud_sup);
+ baud = pl2303_encode_baud_rate_divisor(buf, baud);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 6f7f01eb556a..46179a0828eb 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -282,14 +282,19 @@ static const struct usb_device_id id_table[] = {
/* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
{ USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
+ /* Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
+ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+ },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
/* AT&T Direct IP LTE modems */
{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
- { USB_DEVICE(0x0f3d, 0x68A3), /* Airprime/Sierra Wireless Direct IP modems */
+ /* Airprime/Sierra Wireless Direct IP modems */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3dd3ff8c50d3..e9da41d9fe7f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -773,7 +773,6 @@ static void ti_set_termios(struct tty_struct *tty,
config->wFlags |= TI_UART_ENABLE_RTS_IN;
config->wFlags |= TI_UART_ENABLE_CTS_OUT;
} else {
- tty->hw_stopped = 0;
ti_restart_read(tport, tty);
}
@@ -1291,12 +1290,8 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
/* handle CTS flow control */
tty = tty_port_tty_get(&tport->tp_port->port);
if (tty && C_CRTSCTS(tty)) {
- if (msr & TI_MSR_CTS) {
- tty->hw_stopped = 0;
+ if (msr & TI_MSR_CTS)
tty_wakeup(tty);
- } else {
- tty->hw_stopped = 1;
- }
}
tty_kref_put(tty);
}
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index fb79775447b0..7064eb8d6142 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -20,7 +20,7 @@
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#define DEVICE(vendor, IDS) \
+#define DEVICE_N(vendor, IDS, nport) \
static const struct usb_device_id vendor##_id_table[] = { \
IDS(), \
{ }, \
@@ -31,9 +31,15 @@ static struct usb_serial_driver vendor##_device = { \
.name = #vendor, \
}, \
.id_table = vendor##_id_table, \
- .num_ports = 1, \
+ .num_ports = nport, \
};
+#define DEVICE(vendor, IDS) DEVICE_N(vendor, IDS, 1)
+
+/* Medtronic CareLink USB driver */
+#define CARELINK_IDS() \
+ { USB_DEVICE(0x0a21, 0x8001) } /* MMT-7305WW */
+DEVICE(carelink, CARELINK_IDS);
/* ZIO Motherboard USB driver */
#define ZIO_IDS() \
@@ -64,6 +70,11 @@ DEVICE(vivopay, VIVOPAY_IDS);
{ USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */
DEVICE(moto_modem, MOTO_IDS);
+/* Novatel Wireless GPS driver */
+#define NOVATEL_IDS() \
+ { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */
+DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
+
/* HP4x (48/49) Generic Serial driver */
#define HP4X_IDS() \
{ USB_DEVICE(0x03f0, 0x0121) }
@@ -82,11 +93,13 @@ DEVICE(siemens_mpi, SIEMENS_IDS);
/* All of the above structures mushed into two lists */
static struct usb_serial_driver * const serial_drivers[] = {
+ &carelink_device,
&zio_device,
&funsoft_device,
&flashloader_device,
&vivopay_device,
&moto_modem_device,
+ &novatel_gps_device,
&hp4x_device,
&suunto_device,
&siemens_mpi_device,
@@ -94,11 +107,13 @@ static struct usb_serial_driver * const serial_drivers[] = {
};
static const struct usb_device_id id_table[] = {
+ CARELINK_IDS(),
ZIO_IDS(),
FUNSOFT_IDS(),
FLASHLOADER_IDS(),
VIVOPAY_IDS(),
MOTO_IDS(),
+ NOVATEL_IDS(),
HP4X_IDS(),
SUUNTO_IDS(),
SIEMENS_IDS(),
diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c
index 4841fb57400c..3837d5113bb2 100644
--- a/drivers/usb/serial/xsens_mt.c
+++ b/drivers/usb/serial/xsens_mt.c
@@ -41,28 +41,13 @@ static const struct usb_device_id id_table[] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
-static int has_required_endpoints(const struct usb_host_interface *interface)
-{
- __u8 i;
- int has_bulk_in = 0;
- int has_bulk_out = 0;
-
- for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
- if (usb_endpoint_is_bulk_in(&interface->endpoint[i].desc))
- has_bulk_in = 1;
- else if (usb_endpoint_is_bulk_out(&interface->endpoint[i].desc))
- has_bulk_out = 1;
- }
-
- return has_bulk_in && has_bulk_out;
-}
-
static int xsens_mt_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
- if (!has_required_endpoints(serial->interface->cur_altsetting))
- return -ENODEV;
- return 0;
+ if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+ return 0;
+
+ return -ENODEV;
}
static struct usb_serial_driver xsens_mt_device = {
@@ -82,4 +67,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
module_usb_serial_driver(serial_drivers, id_table);
+MODULE_AUTHOR("Frans Klaver <frans.klaver@xsens.com>");
+MODULE_DESCRIPTION("USB-serial driver for Xsens motion trackers");
MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
deleted file mode 100644
index 1a132e9e947a..000000000000
--- a/drivers/usb/serial/zte_ev.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * ZTE_EV USB serial driver
- *
- * Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- * Copyright (C) 2012 Linux Foundation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver is based on code found in a ZTE_ENV patch that modified
- * the usb-serial generic driver. Comments were left in that I think
- * show the commands used to talk to the device, but I am not sure.
- */
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-#define MAX_SETUP_DATA_SIZE 32
-
-static void debug_data(struct device *dev, const char *function, int len,
- const unsigned char *data, int result)
-{
- dev_dbg(dev, "result = %d\n", result);
- if (result == len)
- dev_dbg(dev, "%s - length = %d, data = %*ph\n", function,
- len, len, data);
-}
-
-static int zte_ev_usb_serial_open(struct tty_struct *tty,
- struct usb_serial_port *port)
-{
- struct usb_device *udev = port->serial->dev;
- struct device *dev = &port->dev;
- int result = 0;
- int len;
- unsigned char *buf;
-
- buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- /* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */
- len = 0;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x22, 0x21,
- 0x0001, 0x0000, NULL, len,
- USB_CTRL_GET_TIMEOUT);
- dev_dbg(dev, "result = %d\n", result);
-
- /* send 2st cmd and receive data */
- /*
- * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
- * 16.0 DI 00 96 00 00 00 00 08
- */
- len = 0x0007;
- result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- 0x21, 0xa1,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
-
- /* send 3rd cmd */
- /*
- * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
- * 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0
- */
- len = 0x0007;
- buf[0] = 0x80;
- buf[1] = 0x25;
- buf[2] = 0x00;
- buf[3] = 0x00;
- buf[4] = 0x00;
- buf[5] = 0x00;
- buf[6] = 0x08;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x20, 0x21,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
-
- /* send 4th cmd */
- /*
- * 16.0 CTL 21 22 03 00 00 00 00 00
- */
- len = 0;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x22, 0x21,
- 0x0003, 0x0000, NULL, len,
- USB_CTRL_GET_TIMEOUT);
- dev_dbg(dev, "result = %d\n", result);
-
- /* send 5th cmd */
- /*
- * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
- * 16.0 DI 80 25 00 00 00 00 08
- */
- len = 0x0007;
- result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- 0x21, 0xa1,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
-
- /* send 6th cmd */
- /*
- * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0
- * 16.0 DO 80 25 00 00 00 00 08
- */
- len = 0x0007;
- buf[0] = 0x80;
- buf[1] = 0x25;
- buf[2] = 0x00;
- buf[3] = 0x00;
- buf[4] = 0x00;
- buf[5] = 0x00;
- buf[6] = 0x08;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x20, 0x21,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
- kfree(buf);
-
- return usb_serial_generic_open(tty, port);
-}
-
-/*
- * CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0
- *
- * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0
- * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0
- *
- * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3)
- * 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0
- *
- * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0
- * 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0
- *
- * 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2)
- *
- * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0
- * 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0
- *
- * 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0
- *
- * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
- * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
- *
- * 16.0 CTL 21 22 03 00 00 00 00 00
-*/
-
-static void zte_ev_usb_serial_close(struct usb_serial_port *port)
-{
- struct usb_device *udev = port->serial->dev;
- struct device *dev = &port->dev;
- int result = 0;
- int len;
- unsigned char *buf;
-
- buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
- if (!buf)
- return;
-
- /* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */
- len = 0;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x22, 0x21,
- 0x0002, 0x0000, NULL, len,
- USB_CTRL_GET_TIMEOUT);
- dev_dbg(dev, "result = %d\n", result);
-
- /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
- len = 0;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x22, 0x21,
- 0x0003, 0x0000, NULL, len,
- USB_CTRL_GET_TIMEOUT);
- dev_dbg(dev, "result = %d\n", result);
-
- /* send 3st cmd and recieve data */
- /*
- * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
- * 16.0 DI 00 08 07 00 00 00 08
- */
- len = 0x0007;
- result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- 0x21, 0xa1,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
-
- /* send 4th cmd */
- /*
- * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
- * 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0
- */
- len = 0x0007;
- buf[0] = 0x00;
- buf[1] = 0xc2;
- buf[2] = 0x01;
- buf[3] = 0x00;
- buf[4] = 0x00;
- buf[5] = 0x00;
- buf[6] = 0x08;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x20, 0x21,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
-
- /* send 5th cmd */
- /*
- * 16.0 CTL 21 22 03 00 00 00 00 00
- */
- len = 0;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x22, 0x21,
- 0x0003, 0x0000, NULL, len,
- USB_CTRL_GET_TIMEOUT);
- dev_dbg(dev, "result = %d\n", result);
-
- /* send 6th cmd */
- /*
- * 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
- * 16.0 DI 00 c2 01 00 00 00 08
- */
- len = 0x0007;
- result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
- 0x21, 0xa1,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
-
- /* send 7th cmd */
- /*
- * 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
- * 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
- */
- len = 0x0007;
- buf[0] = 0x00;
- buf[1] = 0xc2;
- buf[2] = 0x01;
- buf[3] = 0x00;
- buf[4] = 0x00;
- buf[5] = 0x00;
- buf[6] = 0x08;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x20, 0x21,
- 0x0000, 0x0000, buf, len,
- USB_CTRL_GET_TIMEOUT);
- debug_data(dev, __func__, len, buf, result);
-
- /* send 8th cmd */
- /*
- * 16.0 CTL 21 22 03 00 00 00 00 00
- */
- len = 0;
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x22, 0x21,
- 0x0003, 0x0000, NULL, len,
- USB_CTRL_GET_TIMEOUT);
- dev_dbg(dev, "result = %d\n", result);
-
- kfree(buf);
-
- usb_serial_generic_close(port);
-}
-
-static const struct usb_device_id id_table[] = {
- /* MG880 */
- { USB_DEVICE(0x19d2, 0xfffd) },
- { },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver zio_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "zte_ev",
- },
- .id_table = id_table,
- .num_ports = 1,
- .open = zte_ev_usb_serial_open,
- .close = zte_ev_usb_serial_close,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
- &zio_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL v2");
OpenPOWER on IntegriCloud