summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/aircable.c4
-rw-r--r--drivers/usb/serial/cp210x.c2
-rw-r--r--drivers/usb/serial/cypress_m8.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c7
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h12
-rw-r--r--drivers/usb/serial/io_edgeport.c2
-rw-r--r--drivers/usb/serial/io_edgeport.h2
-rw-r--r--drivers/usb/serial/io_ti.c2
-rw-r--r--drivers/usb/serial/mct_u232.c4
-rw-r--r--drivers/usb/serial/opticon.c4
-rw-r--r--drivers/usb/serial/option.c5
-rw-r--r--drivers/usb/serial/qcserial.c31
-rw-r--r--drivers/usb/serial/usb_wwan.c3
13 files changed, 59 insertions, 21 deletions
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 0db6ace16f7b..aba201cb872c 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -16,7 +16,7 @@
* When reading the process is almost equal except that the header starts with
* 0x00 0x20.
*
- * The device simply need some stuff to understand data comming from the usb
+ * The device simply need some stuff to understand data coming from the usb
* buffer: The First and Second byte is used for a Header, the Third and Fourth
* tells the device the amount of information the package holds.
* Packages are 60 bytes long Header Stuff.
@@ -30,7 +30,7 @@
* one.
*
* The driver registers himself with the USB-serial core and the USB Core. I had
- * to implement a probe function agains USB-serial, because other way, the
+ * to implement a probe function against USB-serial, because other way, the
* driver was attaching himself to both interfaces. I have tryed with different
* configurations of usb_serial_driver with out exit, only the probe function
* could handle this correctly.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4df3e0cecbae..0f11afdda134 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -101,7 +101,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
- { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
+ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 987e9bf7bd02..d9906eb9d16a 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -35,7 +35,7 @@
*
* Lonnie Mendez <dignome@gmail.com>
* 04-10-2004
- * Driver modified to support dynamic line settings. Various improvments
+ * Driver modified to support dynamic line settings. Various improvements
* and features.
*
* Neil Whelchel
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 65967b36365f..4de6ef0ae52a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -17,7 +17,7 @@
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*
- * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
+ * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
* and extra documentation
*
* Change entries from 2004 and earlier can be found in versions of this
@@ -151,6 +151,8 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
* /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
*/
static struct usb_device_id id_table_combined [] = {
+ { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
@@ -525,6 +527,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
+ { USB_DEVICE(OCT_VID, OCT_DK201_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
@@ -787,6 +790,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+ { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index c543e55bafba..efffc23723bd 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -300,6 +300,8 @@
* Hameg HO820 and HO870 interface (using VID 0x0403)
*/
#define HAMEG_HO820_PID 0xed74
+#define HAMEG_HO730_PID 0xed73
+#define HAMEG_HO720_PID 0xed72
#define HAMEG_HO870_PID 0xed71
/*
@@ -572,6 +574,7 @@
/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */
#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
/*
@@ -1141,3 +1144,12 @@
#define QIHARDWARE_VID 0x20B7
#define MILKYMISTONE_JTAGSERIAL_PID 0x0713
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID 0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID 0xF60B
+
+
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f1aedfa7c420..abf095be5753 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1981,7 +1981,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
if (code == IOSP_STATUS_OPEN_RSP) {
edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
edge_port->maxTxCredits = edge_port->txCredits;
- dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+ dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
handle_new_msr(edge_port, byte2);
/* send the current line settings to the port so we are
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index dced7ec65470..ad9c1d47a619 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -68,7 +68,7 @@ struct comMapper {
#define PROC_SET_COM_ENTRY 2
-/* The following sturcture is passed to the write */
+/* The following structure is passed to the write */
struct procWrite {
int Command;
union {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d8434910fa7b..0aac00afb5c8 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -433,7 +433,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
/* We can only send a maximum of 1 aligned byte page at a time */
- /* calulate the number of bytes left in the first page */
+ /* calculate the number of bytes left in the first page */
write_length = EPROM_PAGE_SIZE -
(start_address & (EPROM_PAGE_SIZE - 1));
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index d2c019637e45..ba0d28727ccb 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -106,7 +106,7 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state);
static int mct_u232_tiocmget(struct tty_struct *tty);
static int mct_u232_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
-static int mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int mct_u232_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg);
static int mct_u232_get_icount(struct tty_struct *tty,
struct serial_icounter_struct *icount);
@@ -874,7 +874,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty)
}
}
-static int mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+static int mct_u232_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
DEFINE_WAIT(wait);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 201f6096844b..1b5633f46984 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -116,7 +116,7 @@ static void opticon_read_bulk_callback(struct urb *urb)
} else {
if ((data[0] == 0x00) && (data[1] == 0x01)) {
spin_lock_irqsave(&priv->lock, flags);
- /* CTS status infomation package */
+ /* CTS status information package */
if (data[2] == 0x00)
priv->cts = false;
else
@@ -413,7 +413,7 @@ static int opticon_tiocmget(struct tty_struct *tty)
return result;
}
-static int opticon_tiocmset(struct tty_struct *tty, struct file *file,
+static int opticon_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 75c7f456eed5..d77ff0435896 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -407,6 +407,10 @@ static void option_instat_callback(struct urb *urb);
/* ONDA MT825UP HSDPA 14.2 modem */
#define ONDA_MT825UP 0x000b
+/* Samsung products */
+#define SAMSUNG_VENDOR_ID 0x04e8
+#define SAMSUNG_PRODUCT_GT_B3730 0x6889
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
@@ -968,6 +972,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
+ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730/GT-B3710 LTE USB modem.*/
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 8858201eb1d3..54a9dab1f33b 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -111,7 +111,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
ifnum = intf->desc.bInterfaceNumber;
dbg("This Interface = %d", ifnum);
- data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+ data = kzalloc(sizeof(struct usb_wwan_intf_private),
GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -134,8 +134,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
dbg("QDL port found");
- if (serial->interface->num_altsetting == 1)
- return 0;
+ if (serial->interface->num_altsetting == 1) {
+ retval = 0; /* Success */
+ break;
+ }
retval = usb_set_interface(serial->dev, ifnum, 1);
if (retval < 0) {
@@ -145,7 +147,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
retval = -ENODEV;
kfree(data);
}
- return retval;
}
break;
@@ -166,6 +167,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
+ kfree(data);
}
} else if (ifnum == 2) {
dbg("Modem port found");
@@ -177,7 +179,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
retval = -ENODEV;
kfree(data);
}
- return retval;
} else if (ifnum==3) {
/*
* NMEA (serial line 9600 8N1)
@@ -191,6 +192,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
"Could not set interface, error %d\n",
retval);
retval = -ENODEV;
+ kfree(data);
}
}
break;
@@ -199,12 +201,27 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
dev_err(&serial->dev->dev,
"unknown number of interfaces: %d\n", nintf);
kfree(data);
- return -ENODEV;
+ retval = -ENODEV;
}
+ /* Set serial->private if not returning -ENODEV */
+ if (retval != -ENODEV)
+ usb_set_serial_data(serial, data);
return retval;
}
+static void qc_release(struct usb_serial *serial)
+{
+ struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+ dbg("%s", __func__);
+
+ /* Call usb_wwan release & free the private data allocated in qcprobe */
+ usb_wwan_release(serial);
+ usb_set_serial_data(serial, NULL);
+ kfree(priv);
+}
+
static struct usb_serial_driver qcdevice = {
.driver = {
.owner = THIS_MODULE,
@@ -222,7 +239,7 @@ static struct usb_serial_driver qcdevice = {
.chars_in_buffer = usb_wwan_chars_in_buffer,
.attach = usb_wwan_startup,
.disconnect = usb_wwan_disconnect,
- .release = usb_wwan_release,
+ .release = qc_release,
#ifdef CONFIG_PM
.suspend = usb_wwan_suspend,
.resume = usb_wwan_resume,
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index a65ddd543869..e4fad5e643d7 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -698,8 +698,7 @@ static void play_delayed(struct usb_serial_port *port)
/* we have to throw away the rest */
do {
unbusy_queued_urb(urb, portdata);
- //extremely dirty
- atomic_dec(&port->serial->interface->dev.power.usage_count);
+ usb_autopm_put_interface_no_suspend(port->serial->interface);
} while ((urb = usb_get_from_anchor(&portdata->delayed)));
break;
}
OpenPOWER on IntegriCloud