1 files changed, 165 insertions, 219 deletions

diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 98b36fc88c77..f200e472e476 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -22,7 +22,6 @@
  * - ENDPT:  endpoint operations (Gadget API)
  * - GADGET: gadget operations (Gadget API)
  * - BUS:    bus glue code, bus abstraction layer
- * - PCI:    PCI core interface and PCI resources (interrupts, memory...)
  *
  * Compile Options
  * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
@@ -60,11 +59,11 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 
 #include "ci13xxx_udc.h"
 
@@ -75,9 +74,6 @@
 /* ctrl register bank access */
 static DEFINE_SPINLOCK(udc_lock);
 
-/* driver name */
-#define UDC_DRIVER_NAME   "ci13xxx_udc"
-
 /* control endpoint description */
 static const struct usb_endpoint_descriptor
 ctrl_endpt_desc = {
@@ -132,6 +128,9 @@ static struct {
 	size_t        size;   /* bank size */
 } hw_bank;
 
+/* MSM specific */
+#define ABS_AHBBURST        (0x0090UL)
+#define ABS_AHBMODE         (0x0098UL)
 /* UDC register map */
 #define ABS_CAPLENGTH       (0x100UL)
 #define ABS_HCCPARAMS       (0x108UL)
@@ -248,13 +247,7 @@ static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data)
 	return (reg & mask) >> ffs_nr(mask);
 }
 
-/**
- * hw_device_reset: resets chip (execute without interruption)
- * @base: register base address
- *
- * This function returns an error code
- */
-static int hw_device_reset(void __iomem *base)
+static int hw_device_init(void __iomem *base)
 {
 	u32 reg;
 
@@ -271,6 +264,28 @@ static int hw_device_reset(void __iomem *base)
 	hw_bank.size += CAP_LAST;
 	hw_bank.size /= sizeof(u32);
 
+	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
+	if (reg == 0 || reg > ENDPT_MAX)
+		return -ENODEV;
+
+	hw_ep_max = reg;   /* cache hw ENDPT_MAX */
+
+	/* setup lock mode ? */
+
+	/* ENDPTSETUPSTAT is '0' by default */
+
+	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
+
+	return 0;
+}
+/**
+ * hw_device_reset: resets chip (execute without interruption)
+ * @base: register base address
+ *
+ * This function returns an error code
+ */
+static int hw_device_reset(struct ci13xxx *udc)
+{
 	/* should flush & stop before reset */
 	hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0);
 	hw_cwrite(CAP_USBCMD, USBCMD_RS, 0);
@@ -279,6 +294,14 @@ static int hw_device_reset(void __iomem *base)
 	while (hw_cread(CAP_USBCMD, USBCMD_RST))
 		udelay(10);             /* not RTOS friendly */
 
+
+	if (udc->udc_driver->notify_event)
+		udc->udc_driver->notify_event(udc,
+			CI13XXX_CONTROLLER_RESET_EVENT);
+
+	if (udc->udc_driver->flags && CI13XXX_DISABLE_STREAMING)
+		hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS);
+
 	/* USBMODE should be configured step by step */
 	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE);
@@ -290,18 +313,6 @@ static int hw_device_reset(void __iomem *base)
 		return -ENODEV;
 	}
 
-	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
-	if (reg == 0 || reg > ENDPT_MAX)
-		return -ENODEV;
-
-	hw_ep_max = reg;   /* cache hw ENDPT_MAX */
-
-	/* setup lock mode ? */
-
-	/* ENDPTSETUPSTAT is '0' by default */
-
-	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
-
 	return 0;
 }
 
@@ -1557,8 +1568,6 @@ __acquires(mEp->lock)
  * Caller must hold lock
  */
 static int _gadget_stop_activity(struct usb_gadget *gadget)
-__releases(udc->lock)
-__acquires(udc->lock)
 {
 	struct usb_ep *ep;
 	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
@@ -1570,8 +1579,6 @@ __acquires(udc->lock)
 	if (gadget == NULL)
 		return -EINVAL;
 
-	spin_unlock(udc->lock);
-
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
@@ -1591,8 +1598,6 @@ __acquires(udc->lock)
 		mEp->status = NULL;
 	}
 
-	spin_lock(udc->lock);
-
 	return 0;
 }
 
@@ -1621,6 +1626,7 @@ __acquires(udc->lock)
 
 	dbg_event(0xFF, "BUS RST", 0);
 
+	spin_unlock(udc->lock);
 	retval = _gadget_stop_activity(&udc->gadget);
 	if (retval)
 		goto done;
@@ -1629,10 +1635,9 @@ __acquires(udc->lock)
 	if (retval)
 		goto done;
 
-	spin_unlock(udc->lock);
 	retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc);
 	if (!retval) {
-		mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_KERNEL);
+		mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC);
 		if (mEp->status == NULL) {
 			usb_ep_disable(&mEp->ep);
 			retval = -ENOMEM;
@@ -2061,7 +2066,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 {
 	struct ci13xxx_ep  *mEp  = container_of(ep, struct ci13xxx_ep, ep);
 	struct ci13xxx_req *mReq = NULL;
-	unsigned long flags;
 
 	trace("%p, %i", ep, gfp_flags);
 
@@ -2070,8 +2074,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 		return NULL;
 	}
 
-	spin_lock_irqsave(mEp->lock, flags);
-
 	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
 	if (mReq != NULL) {
 		INIT_LIST_HEAD(&mReq->queue);
@@ -2086,8 +2088,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 
 	dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL);
 
-	spin_unlock_irqrestore(mEp->lock, flags);
-
 	return (mReq == NULL) ? NULL : &mReq->req;
 }
 
@@ -2332,12 +2332,47 @@ static const struct usb_ep_ops usb_ep_ops = {
 /******************************************************************************
  * GADGET block
  *****************************************************************************/
+static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+	int gadget_ready = 0;
+
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(udc->lock, flags);
+	udc->vbus_active = is_active;
+	if (udc->driver)
+		gadget_ready = 1;
+	spin_unlock_irqrestore(udc->lock, flags);
+
+	if (gadget_ready) {
+		if (is_active) {
+			pm_runtime_get_sync(&_gadget->dev);
+			hw_device_reset(udc);
+			hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+		} else {
+			hw_device_state(0);
+			if (udc->udc_driver->notify_event)
+				udc->udc_driver->notify_event(udc,
+				CI13XXX_CONTROLLER_STOPPED_EVENT);
+			_gadget_stop_activity(&udc->gadget);
+			pm_runtime_put_sync(&_gadget->dev);
+		}
+	}
+
+	return 0;
+}
+
 /**
  * Device operations part of the API to the USB controller hardware,
  * which don't involve endpoints (or i/o)
  * Check  "usb_gadget.h" for details
  */
-static const struct usb_gadget_ops usb_gadget_ops;
+static const struct usb_gadget_ops usb_gadget_ops = {
+	.vbus_session	= ci13xxx_vbus_session,
+};
 
 /**
  * usb_gadget_probe_driver: register a gadget driver
@@ -2390,7 +2425,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	info("hw_ep_max = %d", hw_ep_max);
 
 	udc->driver = driver;
-	udc->gadget.ops        = NULL;
 	udc->gadget.dev.driver = NULL;
 
 	retval = 0;
@@ -2410,9 +2444,11 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		/* this allocation cannot be random */
 		for (k = RX; k <= TX; k++) {
 			INIT_LIST_HEAD(&mEp->qh[k].queue);
+			spin_unlock_irqrestore(udc->lock, flags);
 			mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool,
 							GFP_KERNEL,
 							&mEp->qh[k].dma);
+			spin_lock_irqsave(udc->lock, flags);
 			if (mEp->qh[k].ptr == NULL)
 				retval = -ENOMEM;
 			else
@@ -2429,7 +2465,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	/* bind gadget */
 	driver->driver.bus     = NULL;
-	udc->gadget.ops        = &usb_gadget_ops;
 	udc->gadget.dev.driver = &driver->driver;
 
 	spin_unlock_irqrestore(udc->lock, flags);
@@ -2437,12 +2472,24 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	spin_lock_irqsave(udc->lock, flags);
 
 	if (retval) {
-		udc->gadget.ops        = NULL;
 		udc->gadget.dev.driver = NULL;
 		goto done;
 	}
 
+	pm_runtime_get_sync(&udc->gadget.dev);
+	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
+		if (udc->vbus_active) {
+			if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
+				hw_device_reset(udc);
+		} else {
+			pm_runtime_put_sync(&udc->gadget.dev);
+			goto done;
+		}
+	}
+
 	retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+	if (retval)
+		pm_runtime_put_sync(&udc->gadget.dev);
 
  done:
 	spin_unlock_irqrestore(udc->lock, flags);
@@ -2475,19 +2522,22 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	spin_lock_irqsave(udc->lock, flags);
 
-	hw_device_state(0);
-
-	/* unbind gadget */
-	if (udc->gadget.ops != NULL) {
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
+			udc->vbus_active) {
+		hw_device_state(0);
+		if (udc->udc_driver->notify_event)
+			udc->udc_driver->notify_event(udc,
+			CI13XXX_CONTROLLER_STOPPED_EVENT);
 		_gadget_stop_activity(&udc->gadget);
+		pm_runtime_put(&udc->gadget.dev);
+	}
 
-		spin_unlock_irqrestore(udc->lock, flags);
-		driver->unbind(&udc->gadget);               /* MAY SLEEP */
-		spin_lock_irqsave(udc->lock, flags);
+	/* unbind gadget */
+	spin_unlock_irqrestore(udc->lock, flags);
+	driver->unbind(&udc->gadget);               /* MAY SLEEP */
+	spin_lock_irqsave(udc->lock, flags);
 
-		udc->gadget.ops        = NULL;
-		udc->gadget.dev.driver = NULL;
-	}
+	udc->gadget.dev.driver = NULL;
 
 	/* free resources */
 	for (i = 0; i < hw_ep_max; i++) {
@@ -2544,6 +2594,14 @@ static irqreturn_t udc_irq(void)
 	}
 
 	spin_lock(udc->lock);
+
+	if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
+		if (hw_cread(CAP_USBMODE, USBMODE_CM) !=
+				USBMODE_CM_DEVICE) {
+			spin_unlock(udc->lock);
+			return IRQ_NONE;
+		}
+	}
 	intr = hw_test_and_clear_intr_active();
 	if (intr) {
 		isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr;
@@ -2602,14 +2660,16 @@ static void udc_release(struct device *dev)
  * No interrupts active, the IRQ has not been requested yet
  * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask
  */
-static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
+static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
+		void __iomem *regs)
 {
 	struct ci13xxx *udc;
 	int retval = 0;
 
 	trace("%p, %p, %p", dev, regs, name);
 
-	if (dev == NULL || regs == NULL || name == NULL)
+	if (dev == NULL || regs == NULL || driver == NULL ||
+			driver->name == NULL)
 		return -EINVAL;
 
 	udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL);
@@ -2617,42 +2677,77 @@ static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
 		return -ENOMEM;
 
 	udc->lock = &udc_lock;
+	udc->regs = regs;
+	udc->udc_driver = driver;
 
-	retval = hw_device_reset(regs);
-	if (retval)
-		goto done;
-
-	udc->gadget.ops          = NULL;
+	udc->gadget.ops          = &usb_gadget_ops;
 	udc->gadget.speed        = USB_SPEED_UNKNOWN;
 	udc->gadget.is_dualspeed = 1;
 	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = name;
+	udc->gadget.name         = driver->name;
 
 	INIT_LIST_HEAD(&udc->gadget.ep_list);
 	udc->gadget.ep0 = NULL;
 
 	dev_set_name(&udc->gadget.dev, "gadget");
 	udc->gadget.dev.dma_mask = dev->dma_mask;
+	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
 	udc->gadget.dev.parent   = dev;
 	udc->gadget.dev.release  = udc_release;
 
+	retval = hw_device_init(regs);
+	if (retval < 0)
+		goto free_udc;
+
+	udc->transceiver = otg_get_transceiver();
+
+	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+		if (udc->transceiver == NULL) {
+			retval = -ENODEV;
+			goto free_udc;
+		}
+	}
+
+	if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
+		retval = hw_device_reset(udc);
+		if (retval)
+			goto put_transceiver;
+	}
+
 	retval = device_register(&udc->gadget.dev);
-	if (retval)
-		goto done;
+	if (retval) {
+		put_device(&udc->gadget.dev);
+		goto put_transceiver;
+	}
 
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 	retval = dbg_create_files(&udc->gadget.dev);
 #endif
-	if (retval) {
-		device_unregister(&udc->gadget.dev);
-		goto done;
+	if (retval)
+		goto unreg_device;
+
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+		if (retval)
+			goto remove_dbg;
 	}
+	pm_runtime_no_callbacks(&udc->gadget.dev);
+	pm_runtime_enable(&udc->gadget.dev);
 
 	_udc = udc;
 	return retval;
 
- done:
 	err("error = %i", retval);
+remove_dbg:
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	dbg_remove_files(&udc->gadget.dev);
+#endif
+unreg_device:
+	device_unregister(&udc->gadget.dev);
+put_transceiver:
+	if (udc->transceiver)
+		otg_put_transceiver(udc->transceiver);
+free_udc:
 	kfree(udc);
 	_udc = NULL;
 	return retval;
@@ -2672,6 +2767,10 @@ static void udc_remove(void)
 		return;
 	}
 
+	if (udc->transceiver) {
+		otg_set_peripheral(udc->transceiver, &udc->gadget);
+		otg_put_transceiver(udc->transceiver);
+	}
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 	dbg_remove_files(&udc->gadget.dev);
 #endif
@@ -2680,156 +2779,3 @@ static void udc_remove(void)
 	kfree(udc);
 	_udc = NULL;
 }
-
-/******************************************************************************
- * PCI block
- *****************************************************************************/
-/**
- * ci13xxx_pci_irq: interrut handler
- * @irq:  irq number
- * @pdev: USB Device Controller interrupt source
- *
- * This function returns IRQ_HANDLED if the IRQ has been handled
- * This is an ISR don't trace, use attribute interface instead
- */
-static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev)
-{
-	if (irq == 0) {
-		dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!");
-		return IRQ_HANDLED;
-	}
-	return udc_irq();
-}
-
-/**
- * ci13xxx_pci_probe: PCI probe
- * @pdev: USB device controller being probed
- * @id:   PCI hotplug ID connecting controller to UDC framework
- *
- * This function returns an error code
- * Allocates basic PCI resources for this USB device controller, and then
- * invokes the udc_probe() method to start the UDC associated with it
- */
-static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
-				       const struct pci_device_id *id)
-{
-	void __iomem *regs = NULL;
-	int retval = 0;
-
-	if (id == NULL)
-		return -EINVAL;
-
-	retval = pci_enable_device(pdev);
-	if (retval)
-		goto done;
-
-	if (!pdev->irq) {
-		dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
-		retval = -ENODEV;
-		goto disable_device;
-	}
-
-	retval = pci_request_regions(pdev, UDC_DRIVER_NAME);
-	if (retval)
-		goto disable_device;
-
-	/* BAR 0 holds all the registers */
-	regs = pci_iomap(pdev, 0, 0);
-	if (!regs) {
-		dev_err(&pdev->dev, "Error mapping memory!");
-		retval = -EFAULT;
-		goto release_regions;
-	}
-	pci_set_drvdata(pdev, (__force void *)regs);
-
-	pci_set_master(pdev);
-	pci_try_set_mwi(pdev);
-
-	retval = udc_probe(&pdev->dev, regs, UDC_DRIVER_NAME);
-	if (retval)
-		goto iounmap;
-
-	/* our device does not have MSI capability */
-
-	retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED,
-			     UDC_DRIVER_NAME, pdev);
-	if (retval)
-		goto gadget_remove;
-
-	return 0;
-
- gadget_remove:
-	udc_remove();
- iounmap:
-	pci_iounmap(pdev, regs);
- release_regions:
-	pci_release_regions(pdev);
- disable_device:
-	pci_disable_device(pdev);
- done:
-	return retval;
-}
-
-/**
- * ci13xxx_pci_remove: PCI remove
- * @pdev: USB Device Controller being removed
- *
- * Reverses the effect of ci13xxx_pci_probe(),
- * first invoking the udc_remove() and then releases
- * all PCI resources allocated for this USB device controller
- */
-static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
-{
-	free_irq(pdev->irq, pdev);
-	udc_remove();
-	pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev));
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-/**
- * PCI device table
- * PCI device structure
- *
- * Check "pci.h" for details
- */
-static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
-	{ PCI_DEVICE(0x153F, 0x1004) },
-	{ PCI_DEVICE(0x153F, 0x1006) },
-	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
-};
-MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table);
-
-static struct pci_driver ci13xxx_pci_driver = {
-	.name         =	UDC_DRIVER_NAME,
-	.id_table     =	ci13xxx_pci_id_table,
-	.probe        =	ci13xxx_pci_probe,
-	.remove       =	__devexit_p(ci13xxx_pci_remove),
-};
-
-/**
- * ci13xxx_pci_init: module init
- *
- * Driver load
- */
-static int __init ci13xxx_pci_init(void)
-{
-	return pci_register_driver(&ci13xxx_pci_driver);
-}
-module_init(ci13xxx_pci_init);
-
-/**
- * ci13xxx_pci_exit: module exit
- *
- * Driver unload
- */
-static void __exit ci13xxx_pci_exit(void)
-{
-	pci_unregister_driver(&ci13xxx_pci_driver);
-}
-module_exit(ci13xxx_pci_exit);
-
-MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
-MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("June 2008");