6 files changed, 45 insertions, 44 deletions

diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index dd5e1cede2b5..c3f933d10295 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -213,17 +213,17 @@ static int mtk8250_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
-		err = mtk8250_runtime_resume(&pdev->dev);
-		if (err)
-			return err;
-	}
+	err = mtk8250_runtime_resume(&pdev->dev);
+	if (err)
+		return err;
 
 	data->line = serial8250_register_8250_port(&uart);
 	if (data->line < 0)
 		return data->line;
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 }
 
@@ -234,13 +234,11 @@ static int mtk8250_remove(struct platform_device *pdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	serial8250_unregister_port(data->line);
+	mtk8250_runtime_suspend(&pdev->dev);
 
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_put_noidle(&pdev->dev);
 
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		mtk8250_runtime_suspend(&pdev->dev);
-
 	return 0;
 }
 
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index f776b3eafb96..3f779d25ec0c 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -552,30 +552,11 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
  */
 static void serial8250_clear_fifos(struct uart_8250_port *p)
 {
-	unsigned char fcr;
-	unsigned char clr_mask = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
-
 	if (p->capabilities & UART_CAP_FIFO) {
-		/*
-		 * Make sure to avoid changing FCR[7:3] and ENABLE_FIFO bits.
-		 * In case ENABLE_FIFO is not set, there is nothing to flush
-		 * so just return. Furthermore, on certain implementations of
-		 * the 8250 core, the FCR[7:3] bits may only be changed under
-		 * specific conditions and changing them if those conditions
-		 * are not met can have nasty side effects. One such core is
-		 * the 8250-omap present in TI AM335x.
-		 */
-		fcr = serial_in(p, UART_FCR);
-
-		/* FIFO is not enabled, there's nothing to clear. */
-		if (!(fcr & UART_FCR_ENABLE_FIFO))
-			return;
-
-		fcr |= clr_mask;
-		serial_out(p, UART_FCR, fcr);
-
-		fcr &= ~clr_mask;
-		serial_out(p, UART_FCR, fcr);
+		serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+		serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+			       UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+		serial_out(p, UART_FCR, 0);
 	}
 }
 
@@ -1467,7 +1448,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p)
 	 * Enable previously disabled RX interrupts.
 	 */
 	if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) {
-		serial8250_clear_fifos(p);
+		serial8250_clear_and_reinit_fifos(p);
 
 		p->ier |= UART_IER_RLSI | UART_IER_RDI;
 		serial_port_out(&p->port, UART_IER, p->ier);
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index baeeeaec3f03..6fb312e7af71 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -233,7 +233,7 @@ static void kgdboc_put_char(u8 chr)
 static int param_set_kgdboc_var(const char *kmessage,
 				const struct kernel_param *kp)
 {
-	int len = strlen(kmessage);
+	size_t len = strlen(kmessage);
 
 	if (len >= MAX_CONFIG_LEN) {
 		pr_err("config string too long\n");
@@ -254,7 +254,7 @@ static int param_set_kgdboc_var(const char *kmessage,
 
 	strcpy(config, kmessage);
 	/* Chop out \n char as a result of echo */
-	if (config[len - 1] == '\n')
+	if (len && config[len - 1] == '\n')
 		config[len - 1] = '\0';
 
 	if (configured == 1)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ff6ba6d86cd8..cc56cb3b3eca 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1614,10 +1614,10 @@ static void sci_request_dma(struct uart_port *port)
 		hrtimer_init(&s->rx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 		s->rx_timer.function = rx_timer_fn;
 
+		s->chan_rx_saved = s->chan_rx = chan;
+
 		if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
 			sci_submit_rx(s);
-
-		s->chan_rx_saved = s->chan_rx = chan;
 	}
 }
 
@@ -3102,6 +3102,7 @@ static struct uart_driver sci_uart_driver = {
 static int sci_remove(struct platform_device *dev)
 {
 	struct sci_port *port = platform_get_drvdata(dev);
+	unsigned int type = port->port.type;	/* uart_remove_... clears it */
 
 	sci_ports_in_use &= ~BIT(port->port.line);
 	uart_remove_one_port(&sci_uart_driver, &port->port);
@@ -3112,8 +3113,7 @@ static int sci_remove(struct platform_device *dev)
 		sysfs_remove_file(&dev->dev.kobj,
 				  &dev_attr_rx_fifo_trigger.attr);
 	}
-	if (port->port.type == PORT_SCIFA || port->port.type == PORT_SCIFB ||
-	    port->port.type == PORT_HSCIF) {
+	if (type == PORT_SCIFA || type == PORT_SCIFB || type == PORT_HSCIF) {
 		sysfs_remove_file(&dev->dev.kobj,
 				  &dev_attr_rx_fifo_timeout.attr);
 	}
diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c
index 70a4ea4eaa6e..990376576970 100644
--- a/drivers/tty/serial/suncore.c
+++ b/drivers/tty/serial/suncore.c
@@ -112,6 +112,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
+		of_node_put(dp);
 	}
 
 	cflag = CREAD | HUPCL | CLOCAL;
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 6cf3e9b0728f..3e77475668c0 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1394,22 +1394,43 @@ static inline struct console *SUNSU_CONSOLE(void)
 static enum su_type su_get_type(struct device_node *dp)
 {
 	struct device_node *ap = of_find_node_by_path("/aliases");
+	enum su_type rc = SU_PORT_PORT;
 
 	if (ap) {
 		const char *keyb = of_get_property(ap, "keyboard", NULL);
 		const char *ms = of_get_property(ap, "mouse", NULL);
+		struct device_node *match;
 
 		if (keyb) {
-			if (dp == of_find_node_by_path(keyb))
-				return SU_PORT_KBD;
+			match = of_find_node_by_path(keyb);
+
+			/*
+			 * The pointer is used as an identifier not
+			 * as a pointer, we can drop the refcount on
+			 * the of__node immediately after getting it.
+			 */
+			of_node_put(match);
+
+			if (dp == match) {
+				rc = SU_PORT_KBD;
+				goto out;
+			}
 		}
 		if (ms) {
-			if (dp == of_find_node_by_path(ms))
-				return SU_PORT_MS;
+			match = of_find_node_by_path(ms);
+
+			of_node_put(match);
+
+			if (dp == match) {
+				rc = SU_PORT_MS;
+				goto out;
+			}
 		}
 	}
 
-	return SU_PORT_PORT;
+out:
+	of_node_put(ap);
+	return rc;
 }
 
 static int su_probe(struct platform_device *op)