summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250.c8
-rw-r--r--drivers/tty/serial/8250_pci.c11
-rw-r--r--drivers/tty/serial/8250_pnp.c3
-rw-r--r--drivers/tty/serial/atmel_serial.c8
-rw-r--r--drivers/tty/serial/crisv10.c4
-rw-r--r--drivers/tty/serial/max3107-aava.c2
-rw-r--r--drivers/tty/serial/max3107.c2
-rw-r--r--drivers/tty/serial/mrst_max3110.c2
-rw-r--r--drivers/tty/serial/omap-serial.c3
-rw-r--r--drivers/tty/serial/pch_uart.c3
-rw-r--r--drivers/tty/serial/samsung.c8
-rw-r--r--drivers/tty/serial/serial_core.c5
-rw-r--r--drivers/tty/serial/sh-sci.c72
-rw-r--r--drivers/tty/serial/ucc_uart.c2
14 files changed, 99 insertions, 34 deletions
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index f2dfec82faf8..7f50999eebc2 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1819,6 +1819,8 @@ static void serial8250_backup_timeout(unsigned long data)
unsigned int iir, ier = 0, lsr;
unsigned long flags;
+ spin_lock_irqsave(&up->port.lock, flags);
+
/*
* Must disable interrupts or else we risk racing with the interrupt
* based handler.
@@ -1836,10 +1838,8 @@ static void serial8250_backup_timeout(unsigned long data)
* the "Diva" UART used on the management processor on many HP
* ia64 and parisc boxes.
*/
- spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- spin_unlock_irqrestore(&up->port.lock, flags);
if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
(!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
(lsr & UART_LSR_THRE)) {
@@ -1848,11 +1848,13 @@ static void serial8250_backup_timeout(unsigned long data)
}
if (!(iir & UART_IIR_NO_INT))
- serial8250_handle_port(up);
+ transmit_chars(up);
if (is_real_interrupt(up->port.irq))
serial_out(up, UART_IER, ier);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
/* Standard timer interval plus 0.2s to keep the port running */
mod_timer(&up->timer,
jiffies + uart_poll_timeout(&up->port) + HZ / 5);
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 6b887d90a205..3abeca2a2a1b 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -1599,11 +1599,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.device = 0x800D,
.init = pci_eg20t_init,
},
- {
- .vendor = 0x10DB,
- .device = 0x800D,
- .init = pci_eg20t_init,
- },
/*
* Cronyx Omega PCI (PLX-chip based)
*/
@@ -4021,7 +4016,7 @@ static struct pci_device_id serial_pci_tbl[] = {
0, 0, pbn_NETMOS9900_2s_115200 },
/*
- * Best Connectivity PCI Multi I/O cards
+ * Best Connectivity and Rosewill PCI Multi I/O cards
*/
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
@@ -4029,6 +4024,10 @@ static struct pci_device_id serial_pci_tbl[] = {
0, 0, pbn_b0_1_115200 },
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
+ 0xA000, 0x3002,
+ 0, 0, pbn_b0_bt_2_115200 },
+
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
0xA000, 0x3004,
0, 0, pbn_b0_bt_4_115200 },
/* Intel CE4100 */
diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250_pnp.c
index fc301f6722e1..a2f236510ff1 100644
--- a/drivers/tty/serial/8250_pnp.c
+++ b/drivers/tty/serial/8250_pnp.c
@@ -109,6 +109,9 @@ static const struct pnp_device_id pnp_dev_table[] = {
/* IBM */
/* IBM Thinkpad 701 Internal Modem Voice */
{ "IBM0033", 0 },
+ /* Intermec */
+ /* Intermec CV60 touchscreen port */
+ { "PNP4972", 0 },
/* Intertex */
/* Intertex 28k8 33k6 Voice EXT PnP */
{ "IXDC801", 0 },
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index af9b7814965a..b922f5d2e61e 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1609,9 +1609,11 @@ static struct console atmel_console = {
static int __init atmel_console_init(void)
{
if (atmel_default_console_device) {
- add_preferred_console(ATMEL_DEVICENAME,
- atmel_default_console_device->id, NULL);
- atmel_init_port(&atmel_ports[atmel_default_console_device->id],
+ struct atmel_uart_data *pdata =
+ atmel_default_console_device->dev.platform_data;
+
+ add_preferred_console(ATMEL_DEVICENAME, pdata->num, NULL);
+ atmel_init_port(&atmel_ports[pdata->num],
atmel_default_console_device);
register_console(&atmel_console);
}
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 225123b37f19..58be715913cd 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -4450,7 +4450,7 @@ static int __init rs_init(void)
#if defined(CONFIG_ETRAX_RS485)
#if defined(CONFIG_ETRAX_RS485_ON_PA)
- if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
rs485_pa_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
@@ -4459,7 +4459,7 @@ static int __init rs_init(void)
}
#endif
#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
- if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+ if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
rs485_port_g_bit)) {
printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
"RS485 pin\n");
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
index a1fe304f2f52..d73aadd7a9ad 100644
--- a/drivers/tty/serial/max3107-aava.c
+++ b/drivers/tty/serial/max3107-aava.c
@@ -340,5 +340,5 @@ module_exit(max3107_exit);
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("aava-max3107-spi");
+MODULE_ALIAS("spi:aava-max3107");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c
index 750b4f627315..a8164601c0ea 100644
--- a/drivers/tty/serial/max3107.c
+++ b/drivers/tty/serial/max3107.c
@@ -1209,5 +1209,5 @@ module_exit(max3107_exit);
MODULE_DESCRIPTION("MAX3107 driver");
MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("max3107-spi");
+MODULE_ALIAS("spi:max3107");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index a764bf99743b..23bc743f2a22 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -917,4 +917,4 @@ module_init(serial_m3110_init);
module_exit(serial_m3110_exit);
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("max3110-uart");
+MODULE_ALIAS("spi:max3110-uart");
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index c37df8d0fa28..5e713d3ef1f4 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -806,8 +806,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
serial_omap_set_mctrl(&up->port, up->port.mctrl);
/* Software Flow Control Configuration */
- if (termios->c_iflag & (IXON | IXOFF))
- serial_omap_configure_xonxoff(up, termios);
+ serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 846dfcd3ce0d..b46218d679e2 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -598,7 +598,8 @@ static void pch_request_dma(struct uart_port *port)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+ dma_dev = pci_get_bus_and_slot(priv->pdev->bus->number,
+ PCI_DEVFN(0xa, 0)); /* Get DMA's dev
information */
/* Set Tx DMA */
param = &priv->param_tx;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index afc629423152..6edafb5ace18 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1225,15 +1225,19 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
.suspend = s3c24xx_serial_suspend,
.resume = s3c24xx_serial_resume,
};
+#define SERIAL_SAMSUNG_PM_OPS (&s3c24xx_serial_pm_ops)
+
#else /* !CONFIG_PM_SLEEP */
-#define s3c24xx_serial_pm_ops NULL
+
+#define SERIAL_SAMSUNG_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
int s3c24xx_serial_init(struct platform_driver *drv,
struct s3c24xx_uart_info *info)
{
dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
- drv->driver.pm = &s3c24xx_serial_pm_ops;
+
+ drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
return platform_driver_register(drv);
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index db7912cb7ae0..a3efbea5dbba 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -200,6 +200,11 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in
clear_bit(TTY_IO_ERROR, &tty->flags);
}
+ /*
+ * This is to allow setserial on this port. People may want to set
+ * port/irq/type and then reconfigure the port properly if it failed
+ * now.
+ */
if (retval && capable(CAP_SYS_ADMIN))
retval = 0;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 2ec57b2fb278..5ea6ec3442e6 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -47,6 +47,7 @@
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
@@ -95,6 +96,12 @@ struct sci_port {
#endif
struct notifier_block freq_transition;
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+ unsigned short saved_smr;
+ unsigned short saved_fcr;
+ unsigned char saved_brr;
+#endif
};
/* Function prototypes */
@@ -1076,7 +1083,7 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
and CTS/RTS */
- return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+ return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR;
}
#ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -1633,11 +1640,25 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
return ((freq + 16 * bps) / (32 * bps) - 1);
}
+static void sci_reset(struct uart_port *port)
+{
+ unsigned int status;
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+
+ if (port->type != PORT_SCI)
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+}
+
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct sci_port *s = to_sci_port(port);
- unsigned int status, baud, smr_val, max_baud;
+ unsigned int baud, smr_val, max_baud;
int t = -1;
u16 scfcr = 0;
@@ -1657,14 +1678,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_port_enable(s);
- do {
- status = sci_in(port, SCxSR);
- } while (!(status & SCxSR_TEND(port)));
-
- sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
-
- if (port->type != PORT_SCI)
- sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
+ sci_reset(port);
smr_val = sci_in(port, SCSMR) & 3;
@@ -1913,6 +1927,7 @@ static int __devinit sci_init_single(struct platform_device *dev,
port->dev = &dev->dev;
+ pm_runtime_irq_safe(&dev->dev);
pm_runtime_enable(&dev->dev);
}
@@ -2036,7 +2051,8 @@ static int __devinit serial_console_setup(struct console *co, char *options)
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- /* TODO: disable clock */
+ sci_port_disable(sci_port);
+
return uart_set_options(port, co, baud, parity, bits, flow);
}
@@ -2079,6 +2095,36 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
return 0;
}
+#define uart_console(port) ((port)->cons->index == (port)->line)
+
+static int sci_runtime_suspend(struct device *dev)
+{
+ struct sci_port *sci_port = dev_get_drvdata(dev);
+ struct uart_port *port = &sci_port->port;
+
+ if (uart_console(port)) {
+ sci_port->saved_smr = sci_in(port, SCSMR);
+ sci_port->saved_brr = sci_in(port, SCBRR);
+ sci_port->saved_fcr = sci_in(port, SCFCR);
+ }
+ return 0;
+}
+
+static int sci_runtime_resume(struct device *dev)
+{
+ struct sci_port *sci_port = dev_get_drvdata(dev);
+ struct uart_port *port = &sci_port->port;
+
+ if (uart_console(port)) {
+ sci_reset(port);
+ sci_out(port, SCSMR, sci_port->saved_smr);
+ sci_out(port, SCBRR, sci_port->saved_brr);
+ sci_out(port, SCFCR, sci_port->saved_fcr);
+ sci_out(port, SCSCR, sci_port->cfg->scscr);
+ }
+ return 0;
+}
+
#define SCI_CONSOLE (&serial_console)
#else
@@ -2088,6 +2134,8 @@ static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
}
#define SCI_CONSOLE NULL
+#define sci_runtime_suspend NULL
+#define sci_runtime_resume NULL
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
@@ -2203,6 +2251,8 @@ static int sci_resume(struct device *dev)
}
static const struct dev_pm_ops sci_dev_pm_ops = {
+ .runtime_suspend = sci_runtime_suspend,
+ .runtime_resume = sci_runtime_resume,
.suspend = sci_suspend,
.resume = sci_resume,
};
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index c327218cad44..9af9f0879a24 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -235,7 +235,7 @@ static inline void *qe2cpu_addr(dma_addr_t addr, struct uart_qe_port *qe_port)
return qe_port->bd_virt + (addr - qe_port->bd_dma_addr);
/* something nasty happened */
- printk(KERN_ERR "%s: addr=%x\n", __func__, addr);
+ printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr);
BUG();
return NULL;
}
OpenPOWER on IntegriCloud