diff options
Diffstat (limited to 'drivers/tty/serial/sh-sci.h')
| -rw-r--r-- | drivers/tty/serial/sh-sci.h | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index bf69bbdcc1f9..7a4fa185b93e 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -27,18 +27,35 @@ enum { HSSRR, /* Sampling Rate Register */ SCPCR, /* Serial Port Control Register */ SCPDR, /* Serial Port Data Register */ + SCDL, /* BRG Frequency Division Register */ + SCCKS, /* BRG Clock Select Register */ SCIx_NR_REGS, }; /* SCSMR (Serial Mode Register) */ +#define SCSMR_C_A BIT(7) /* Communication Mode */ +#define SCSMR_CSYNC BIT(7) /* - Clocked synchronous mode */ +#define SCSMR_ASYNC 0 /* - Asynchronous mode */ #define SCSMR_CHR BIT(6) /* 7-bit Character Length */ #define SCSMR_PE BIT(5) /* Parity Enable */ #define SCSMR_ODD BIT(4) /* Odd Parity */ #define SCSMR_STOP BIT(3) /* Stop Bit Length */ #define SCSMR_CKS 0x0003 /* Clock Select */ +/* Serial Mode Register, SCIFA/SCIFB only bits */ +#define SCSMR_CKEDG BIT(12) /* Transmit/Receive Clock Edge Select */ +#define SCSMR_SRC_MASK 0x0700 /* Sampling Control */ +#define SCSMR_SRC_16 0x0000 /* Sampling rate 1/16 */ +#define SCSMR_SRC_5 0x0100 /* Sampling rate 1/5 */ +#define SCSMR_SRC_7 0x0200 /* Sampling rate 1/7 */ +#define SCSMR_SRC_11 0x0300 /* Sampling rate 1/11 */ +#define SCSMR_SRC_13 0x0400 /* Sampling rate 1/13 */ +#define SCSMR_SRC_17 0x0500 /* Sampling rate 1/17 */ +#define SCSMR_SRC_19 0x0600 /* Sampling rate 1/19 */ +#define SCSMR_SRC_27 0x0700 /* Sampling rate 1/27 */ + /* Serial Control Register, SCIFA/SCIFB only bits */ #define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ #define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ @@ -109,6 +126,14 @@ enum { #define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */ #define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */ +/* + * BRG Clock Select Register (Some SCIF and HSCIF) + * The Baud Rate Generator for external clock can provide a clock source for + * the sampling clock. It outputs either its frequency divided clock, or the + * (undivided) (H)SCK external clock. + */ +#define SCCKS_CKS BIT(15) /* Select (H)SCK (1) or divided SC_CLK (0) */ +#define SCCKS_XIN BIT(14) /* SC_CLK uses bus clock (1) or SCIF_CLK (0) */ #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) |
