diff options
Diffstat (limited to 'drivers/scsi/scsi_scan.c')
| -rw-r--r-- | drivers/scsi/scsi_scan.c | 330 |
1 files changed, 170 insertions, 160 deletions
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 48edd67982a5..327c5d7e5bd2 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -111,15 +111,14 @@ MODULE_PARM_DESC(inq_timeout, /** * scsi_unlock_floptical - unlock device via a special MODE SENSE command - * @sreq: used to send the command + * @sdev: scsi device to send command to * @result: area to store the result of the MODE SENSE * * Description: - * Send a vendor specific MODE SENSE (not a MODE SELECT) command using - * @sreq to unlock a device, storing the (unused) results into result. + * Send a vendor specific MODE SENSE (not a MODE SELECT) command. * Called for BLIST_KEY devices. **/ -static void scsi_unlock_floptical(struct scsi_request *sreq, +static void scsi_unlock_floptical(struct scsi_device *sdev, unsigned char *result) { unsigned char scsi_cmd[MAX_COMMAND_SIZE]; @@ -129,11 +128,10 @@ static void scsi_unlock_floptical(struct scsi_request *sreq, scsi_cmd[1] = 0; scsi_cmd[2] = 0x2e; scsi_cmd[3] = 0; - scsi_cmd[4] = 0x2a; /* size */ + scsi_cmd[4] = 0x2a; /* size */ scsi_cmd[5] = 0; - sreq->sr_cmd_len = 0; - sreq->sr_data_direction = DMA_FROM_DEVICE; - scsi_wait_req(sreq, scsi_cmd, result, 0x2a /* size */, SCSI_TIMEOUT, 3); + scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL, + SCSI_TIMEOUT, 3); } /** @@ -433,26 +431,25 @@ void scsi_target_reap(struct scsi_target *starget) /** * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY - * @sreq: used to send the INQUIRY + * @sdev: scsi_device to probe * @inq_result: area to store the INQUIRY result + * @result_len: len of inq_result * @bflags: store any bflags found here * * Description: - * Probe the lun associated with @sreq using a standard SCSI INQUIRY; + * Probe the lun associated with @req using a standard SCSI INQUIRY; * - * If the INQUIRY is successful, sreq->sr_result is zero and: the + * If the INQUIRY is successful, zero is returned and the * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length - * are copied to the Scsi_Device at @sreq->sr_device (sdev); - * any flags value is stored in *@bflags. + * are copied to the Scsi_Device any flags value is stored in *@bflags. **/ -static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, - int *bflags) +static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result, + int result_len, int *bflags) { - struct scsi_device *sdev = sreq->sr_device; /* a bit ugly */ unsigned char scsi_cmd[MAX_COMMAND_SIZE]; int first_inquiry_len, try_inquiry_len, next_inquiry_len; int response_len = 0; - int pass, count; + int pass, count, result; struct scsi_sense_hdr sshdr; *bflags = 0; @@ -475,28 +472,26 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, memset(scsi_cmd, 0, 6); scsi_cmd[0] = INQUIRY; scsi_cmd[4] = (unsigned char) try_inquiry_len; - sreq->sr_cmd_len = 0; - sreq->sr_data_direction = DMA_FROM_DEVICE; memset(inq_result, 0, try_inquiry_len); - scsi_wait_req(sreq, (void *) scsi_cmd, (void *) inq_result, - try_inquiry_len, - HZ/2 + HZ*scsi_inq_timeout, 3); + + result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, + inq_result, try_inquiry_len, &sshdr, + HZ / 2 + HZ * scsi_inq_timeout, 3); SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s " "with code 0x%x\n", - sreq->sr_result ? "failed" : "successful", - sreq->sr_result)); + result ? "failed" : "successful", result)); - if (sreq->sr_result) { + if (result) { /* * not-ready to ready transition [asc/ascq=0x28/0x0] * or power-on, reset [asc/ascq=0x29/0x0], continue. * INQUIRY should not yield UNIT_ATTENTION * but many buggy devices do so anyway. */ - if ((driver_byte(sreq->sr_result) & DRIVER_SENSE) && - scsi_request_normalize_sense(sreq, &sshdr)) { + if ((driver_byte(result) & DRIVER_SENSE) && + scsi_sense_valid(&sshdr)) { if ((sshdr.sense_key == UNIT_ATTENTION) && ((sshdr.asc == 0x28) || (sshdr.asc == 0x29)) && @@ -507,7 +502,7 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, break; } - if (sreq->sr_result == 0) { + if (result == 0) { response_len = (unsigned char) inq_result[4] + 5; if (response_len > 255) response_len = first_inquiry_len; /* sanity */ @@ -556,8 +551,8 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, /* If the last transfer attempt got an error, assume the * peripheral doesn't exist or is dead. */ - if (sreq->sr_result) - return; + if (result) + return -EIO; /* Don't report any more data than the device says is valid */ sdev->inquiry_len = min(try_inquiry_len, response_len); @@ -592,8 +587,9 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result, if (sdev->scsi_level >= 2 || (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1)) sdev->scsi_level++; + sdev->sdev_target->scsi_level = sdev->scsi_level; - return; + return 0; } /** @@ -776,6 +772,15 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags) return SCSI_SCAN_LUN_PRESENT; } +static inline void scsi_destroy_sdev(struct scsi_device *sdev) +{ + if (sdev->host->hostt->slave_destroy) + sdev->host->hostt->slave_destroy(sdev); + transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_gendev); +} + + /** * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it * @starget: pointer to target device structure @@ -800,18 +805,17 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, void *hostdata) { struct scsi_device *sdev; - struct scsi_request *sreq; unsigned char *result; - int bflags, res = SCSI_SCAN_NO_RESPONSE; + int bflags, res = SCSI_SCAN_NO_RESPONSE, result_len = 256; struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); /* * The rescan flag is used as an optimization, the first scan of a * host adapter calls into here with rescan == 0. */ - if (rescan) { - sdev = scsi_device_lookup_by_target(starget, lun); - if (sdev) { + sdev = scsi_device_lookup_by_target(starget, lun); + if (sdev) { + if (rescan || sdev->sdev_state != SDEV_CREATED) { SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: device exists on %s\n", sdev->sdev_gendev.bus_id)); @@ -826,21 +830,18 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, sdev->model); return SCSI_SCAN_LUN_PRESENT; } - } - - sdev = scsi_alloc_sdev(starget, lun, hostdata); + scsi_device_put(sdev); + } else + sdev = scsi_alloc_sdev(starget, lun, hostdata); if (!sdev) goto out; - sreq = scsi_allocate_request(sdev, GFP_ATOMIC); - if (!sreq) - goto out_free_sdev; - result = kmalloc(256, GFP_ATOMIC | + + result = kmalloc(result_len, GFP_ATOMIC | ((shost->unchecked_isa_dma) ? __GFP_DMA : 0)); if (!result) - goto out_free_sreq; + goto out_free_sdev; - scsi_probe_lun(sreq, result, &bflags); - if (sreq->sr_result) + if (scsi_probe_lun(sdev, result, result_len, &bflags)) goto out_free_result; /* @@ -868,7 +869,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, if (res == SCSI_SCAN_LUN_PRESENT) { if (bflags & BLIST_KEY) { sdev->lockable = 0; - scsi_unlock_floptical(sreq, result); + scsi_unlock_floptical(sdev, result); } if (bflagsp) *bflagsp = bflags; @@ -876,20 +877,18 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, out_free_result: kfree(result); - out_free_sreq: - scsi_release_request(sreq); out_free_sdev: if (res == SCSI_SCAN_LUN_PRESENT) { if (sdevp) { - scsi_device_get(sdev); - *sdevp = sdev; + if (scsi_device_get(sdev) == 0) { + *sdevp = sdev; + } else { + __scsi_remove_device(sdev); + res = SCSI_SCAN_NO_RESPONSE; + } } - } else { - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_gendev); - } + } else + scsi_destroy_sdev(sdev); out: return res; } @@ -1061,7 +1060,7 @@ EXPORT_SYMBOL(int_to_scsilun); * 0: scan completed (or no memory, so further scanning is futile) * 1: no report lun scan, or not configured **/ -static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, +static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, int rescan) { char devname[64]; @@ -1070,11 +1069,12 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, unsigned int lun; unsigned int num_luns; unsigned int retries; + int result; struct scsi_lun *lunp, *lun_data; - struct scsi_request *sreq; u8 *data; struct scsi_sense_hdr sshdr; - struct scsi_target *starget = scsi_target(sdev); + struct scsi_device *sdev; + struct Scsi_Host *shost = dev_to_shost(&starget->dev); /* * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set. @@ -1082,19 +1082,23 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, * support more than 8 LUNs. */ if ((bflags & BLIST_NOREPORTLUN) || - sdev->scsi_level < SCSI_2 || - (sdev->scsi_level < SCSI_3 && - (!(bflags & BLIST_REPORTLUN2) || sdev->host->max_lun <= 8)) ) + starget->scsi_level < SCSI_2 || + (starget->scsi_level < SCSI_3 && + (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) ) return 1; if (bflags & BLIST_NOLUN) return 0; - sreq = scsi_allocate_request(sdev, GFP_ATOMIC); - if (!sreq) - goto out; + if (!(sdev = scsi_device_lookup_by_target(starget, 0))) { + sdev = scsi_alloc_sdev(starget, 0, NULL); + if (!sdev) + return 0; + if (scsi_device_get(sdev)) + return 0; + } sprintf(devname, "host %d channel %d id %d", - sdev->host->host_no, sdev->channel, sdev->id); + shost->host_no, sdev->channel, sdev->id); /* * Allocate enough to hold the header (the same size as one scsi_lun) @@ -1109,8 +1113,10 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun); lun_data = kmalloc(length, GFP_ATOMIC | (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0)); - if (!lun_data) - goto out_release_request; + if (!lun_data) { + printk(ALLOC_FAILURE_MSG, __FUNCTION__); + goto out; + } scsi_cmd[0] = REPORT_LUNS; @@ -1129,8 +1135,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, scsi_cmd[10] = 0; /* reserved */ scsi_cmd[11] = 0; /* control */ - sreq->sr_cmd_len = 0; - sreq->sr_data_direction = DMA_FROM_DEVICE; /* * We can get a UNIT ATTENTION, for example a power on/reset, so @@ -1146,29 +1150,29 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending" " REPORT LUNS to %s (try %d)\n", devname, retries)); - scsi_wait_req(sreq, scsi_cmd, lun_data, length, - SCSI_TIMEOUT + 4*HZ, 3); + + result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, + lun_data, length, &sshdr, + SCSI_TIMEOUT + 4 * HZ, 3); + SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS" - " %s (try %d) result 0x%x\n", sreq->sr_result - ? "failed" : "successful", retries, - sreq->sr_result)); - if (sreq->sr_result == 0) + " %s (try %d) result 0x%x\n", result + ? "failed" : "successful", retries, result)); + if (result == 0) break; - else if (scsi_request_normalize_sense(sreq, &sshdr)) { + else if (scsi_sense_valid(&sshdr)) { if (sshdr.sense_key != UNIT_ATTENTION) break; } } - if (sreq->sr_result) { + if (result) { /* * The device probably does not support a REPORT LUN command */ kfree(lun_data); - scsi_release_request(sreq); return 1; } - scsi_release_request(sreq); /* * Get the length from the first four bytes of lun_data. @@ -1214,10 +1218,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, for (i = 0; i < sizeof(struct scsi_lun); i++) printk("%02x", data[i]); printk(" has a LUN larger than currently supported.\n"); - } else if (lun == 0) { - /* - * LUN 0 has already been scanned. - */ } else if (lun > sdev->host->max_lun) { printk(KERN_WARNING "scsi: %s lun%d has a LUN larger" " than allowed by the host adapter\n", @@ -1240,15 +1240,13 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags, } kfree(lun_data); - return 0; - - out_release_request: - scsi_release_request(sreq); out: - /* - * We are out of memory, don't try scanning any further. - */ - printk(ALLOC_FAILURE_MSG, __FUNCTION__); + scsi_device_put(sdev); + if (sdev->sdev_state == SDEV_CREATED) + /* + * the sdev we used didn't appear in the report luns scan + */ + scsi_destroy_sdev(sdev); return 0; } @@ -1265,9 +1263,12 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, get_device(&starget->dev); down(&shost->scan_mutex); - res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); - if (res != SCSI_SCAN_LUN_PRESENT) - sdev = ERR_PTR(-ENODEV); + if (scsi_host_scan_allowed(shost)) { + res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, + hostdata); + if (res != SCSI_SCAN_LUN_PRESENT) + sdev = ERR_PTR(-ENODEV); + } up(&shost->scan_mutex); scsi_target_reap(starget); put_device(&starget->dev); @@ -1276,6 +1277,19 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, } EXPORT_SYMBOL(__scsi_add_device); +int scsi_add_device(struct Scsi_Host *host, uint channel, + uint target, uint lun) +{ + struct scsi_device *sdev = + __scsi_add_device(host, channel, target, lun, NULL); + if (IS_ERR(sdev)) + return PTR_ERR(sdev); + + scsi_device_put(sdev); + return 0; +} +EXPORT_SYMBOL(scsi_add_device); + void scsi_rescan_device(struct device *dev) { struct scsi_driver *drv; @@ -1292,32 +1306,12 @@ void scsi_rescan_device(struct device *dev) } EXPORT_SYMBOL(scsi_rescan_device); -/** - * scsi_scan_target - scan a target id, possibly including all LUNs on the - * target. - * @sdevsca: Scsi_Device handle for scanning - * @shost: host to scan - * @channel: channel to scan - * @id: target id to scan - * - * Description: - * Scan the target id on @shost, @channel, and @id. Scan at least LUN - * 0, and possibly all LUNs on the target id. - * - * Use the pre-allocated @sdevscan as a handle for the scanning. This - * function sets sdevscan->host, sdevscan->id and sdevscan->lun; the - * scanning functions modify sdevscan->lun. - * - * First try a REPORT LUN scan, if that does not scan the target, do a - * sequential scan of LUNs on the target id. - **/ -void scsi_scan_target(struct device *parent, unsigned int channel, - unsigned int id, unsigned int lun, int rescan) +static void __scsi_scan_target(struct device *parent, unsigned int channel, + unsigned int id, unsigned int lun, int rescan) { struct Scsi_Host *shost = dev_to_shost(parent); int bflags = 0; int res; - struct scsi_device *sdev = NULL; struct scsi_target *starget; if (shost->this_id == id) @@ -1326,9 +1320,7 @@ void scsi_scan_target(struct device *parent, unsigned int channel, */ return; - starget = scsi_alloc_target(parent, channel, id); - if (!starget) return; @@ -1345,27 +1337,16 @@ void scsi_scan_target(struct device *parent, unsigned int channel, * Scan LUN 0, if there is some response, scan further. Ideally, we * would not configure LUN 0 until all LUNs are scanned. */ - res = scsi_probe_and_add_lun(starget, 0, &bflags, &sdev, rescan, NULL); - if (res == SCSI_SCAN_LUN_PRESENT) { - if (scsi_report_lun_scan(sdev, bflags, rescan) != 0) + res = scsi_probe_and_add_lun(starget, 0, &bflags, NULL, rescan, NULL); + if (res == SCSI_SCAN_LUN_PRESENT || res == SCSI_SCAN_TARGET_PRESENT) { + if (scsi_report_lun_scan(starget, bflags, rescan) != 0) /* * The REPORT LUN did not scan the target, * do a sequential scan. */ scsi_sequential_lun_scan(starget, bflags, - res, sdev->scsi_level, rescan); - } else if (res == SCSI_SCAN_TARGET_PRESENT) { - /* - * There's a target here, but lun 0 is offline so we - * can't use the report_lun scan. Fall back to a - * sequential lun scan with a bflags of SPARSELUN and - * a default scsi level of SCSI_2 - */ - scsi_sequential_lun_scan(starget, BLIST_SPARSELUN, - SCSI_SCAN_TARGET_PRESENT, SCSI_2, rescan); + res, starget->scsi_level, rescan); } - if (sdev) - scsi_device_put(sdev); out_reap: /* now determine if the target has any children at all @@ -1374,6 +1355,33 @@ void scsi_scan_target(struct device *parent, unsigned int channel, put_device(&starget->dev); } + +/** + * scsi_scan_target - scan a target id, possibly including all LUNs on the + * target. + * @parent: host to scan + * @channel: channel to scan + * @id: target id to scan + * @lun: Specific LUN to scan or SCAN_WILD_CARD + * @rescan: passed to LUN scanning routines + * + * Description: + * Scan the target id on @parent, @channel, and @id. Scan at least LUN 0, + * and possibly all LUNs on the target id. + * + * First try a REPORT LUN scan, if that does not scan the target, do a + * sequential scan of LUNs on the target id. + **/ +void scsi_scan_target(struct device *parent, unsigned int channel, + unsigned int id, unsigned int lun, int rescan) +{ + struct Scsi_Host *shost = dev_to_shost(parent); + + down(&shost->scan_mutex); + if (scsi_host_scan_allowed(shost)) + __scsi_scan_target(parent, channel, id, lun, rescan); + up(&shost->scan_mutex); +} EXPORT_SYMBOL(scsi_scan_target); static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel, @@ -1399,10 +1407,12 @@ static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel, order_id = shost->max_id - id - 1; else order_id = id; - scsi_scan_target(&shost->shost_gendev, channel, order_id, lun, rescan); + __scsi_scan_target(&shost->shost_gendev, channel, + order_id, lun, rescan); } else - scsi_scan_target(&shost->shost_gendev, channel, id, lun, rescan); + __scsi_scan_target(&shost->shost_gendev, channel, + id, lun, rescan); } int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel, @@ -1417,11 +1427,15 @@ int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel, return -EINVAL; down(&shost->scan_mutex); - if (channel == SCAN_WILD_CARD) - for (channel = 0; channel <= shost->max_channel; channel++) + if (scsi_host_scan_allowed(shost)) { + if (channel == SCAN_WILD_CARD) + for (channel = 0; channel <= shost->max_channel; + channel++) + scsi_scan_channel(shost, channel, id, lun, + rescan); + else scsi_scan_channel(shost, channel, id, lun, rescan); - else - scsi_scan_channel(shost, channel, id, lun, rescan); + } up(&shost->scan_mutex); return 0; @@ -1453,23 +1467,17 @@ EXPORT_SYMBOL(scsi_scan_single_target); void scsi_forget_host(struct Scsi_Host *shost) { - struct scsi_target *starget, *tmp; + struct scsi_device *sdev; unsigned long flags; - /* - * Ok, this look a bit strange. We always look for the first device - * on the list as scsi_remove_device removes them from it - thus we - * also have to release the lock. - * We don't need to get another reference to the device before - * releasing the lock as we already own the reference from - * scsi_register_device that's release in scsi_remove_device. And - * after that we don't look at sdev anymore. - */ + restart: spin_lock_irqsave(shost->host_lock, flags); - list_for_each_entry_safe(starget, tmp, &shost->__targets, siblings) { + list_for_each_entry(sdev, &shost->__devices, siblings) { + if (sdev->sdev_state == SDEV_DEL) + continue; spin_unlock_irqrestore(shost->host_lock, flags); - scsi_remove_target(&starget->dev); - spin_lock_irqsave(shost->host_lock, flags); + __scsi_remove_device(sdev); + goto restart; } spin_unlock_irqrestore(shost->host_lock, flags); } @@ -1496,12 +1504,15 @@ void scsi_forget_host(struct Scsi_Host *shost) */ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost) { - struct scsi_device *sdev; + struct scsi_device *sdev = NULL; struct scsi_target *starget; + down(&shost->scan_mutex); + if (!scsi_host_scan_allowed(shost)) + goto out; starget = scsi_alloc_target(&shost->shost_gendev, 0, shost->this_id); if (!starget) - return NULL; + goto out; sdev = scsi_alloc_sdev(starget, 0, NULL); if (sdev) { @@ -1509,6 +1520,8 @@ struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost) sdev->borken = 0; } put_device(&starget->dev); + out: + up(&shost->scan_mutex); return sdev; } EXPORT_SYMBOL(scsi_get_host_dev); @@ -1530,10 +1543,7 @@ void scsi_free_host_dev(struct scsi_device *sdev) { BUG_ON(sdev->id != sdev->host->this_id); - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_gendev); + scsi_destroy_sdev(sdev); } EXPORT_SYMBOL(scsi_free_host_dev); |
