diff options
Diffstat (limited to 'drivers/scsi/hpsa_cmd.h')
| -rw-r--r-- | drivers/scsi/hpsa_cmd.h | 34 |
1 files changed, 31 insertions, 3 deletions
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 3a621c74b76f..c601622cc98e 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -42,8 +42,22 @@ #define CMD_UNSOLICITED_ABORT 0x000A #define CMD_TIMEOUT 0x000B #define CMD_UNABORTABLE 0x000C +#define CMD_TMF_STATUS 0x000D #define CMD_IOACCEL_DISABLED 0x000E +#define CMD_CTLR_LOCKUP 0xffff +/* Note: CMD_CTLR_LOCKUP is not a value defined by the CISS spec + * it is a value defined by the driver that commands can be marked + * with when a controller lockup has been detected by the driver + */ +/* TMF function status values */ +#define CISS_TMF_COMPLETE 0x00 +#define CISS_TMF_INVALID_FRAME 0x02 +#define CISS_TMF_NOT_SUPPORTED 0x04 +#define CISS_TMF_FAILED 0x05 +#define CISS_TMF_SUCCESS 0x08 +#define CISS_TMF_WRONG_LUN 0x09 +#define CISS_TMF_OVERLAPPED_TAG 0x0a /* Unit Attentions ASC's as defined for the MSA2012sa */ #define POWER_OR_RESET 0x29 @@ -240,6 +254,7 @@ struct ReportLUNdata { struct ext_report_lun_entry { u8 lunid[8]; +#define MASKED_DEVICE(x) ((x)[3] & 0xC0) #define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F) #define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6]) #define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \ @@ -247,6 +262,8 @@ struct ext_report_lun_entry { u8 wwid[8]; u8 device_type; u8 device_flags; +#define NON_DISK_PHYS_DEV(x) ((x)[17] & 0x01) +#define PHYS_IOACCEL(x) ((x)[17] & 0x08) u8 lun_count; /* multi-lun device, how many luns */ u8 redundant_paths; u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */ @@ -379,6 +396,7 @@ struct ErrorInfo { #define CMD_SCSI 0x03 #define CMD_IOACCEL1 0x04 #define CMD_IOACCEL2 0x05 +#define IOACCEL2_TMF 0x06 #define DIRECT_LOOKUP_SHIFT 4 #define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1)) @@ -421,7 +439,10 @@ struct CommandList { * not used. */ struct hpsa_scsi_dev_t *phys_disk; - atomic_t refcount; /* Must be last to avoid memset in cmd_alloc */ + + int abort_pending; + struct hpsa_scsi_dev_t *reset_pending; + atomic_t refcount; /* Must be last to avoid memset in hpsa_cmd_init() */ } __aligned(COMMANDLIST_ALIGNMENT); /* Max S/G elements in I/O accelerator command */ @@ -515,6 +536,12 @@ struct io_accel2_scsi_response { #define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL 0x28 #define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED 0x40 #define IOACCEL2_STATUS_SR_IOACCEL_DISABLED 0x0E +#define IOACCEL2_STATUS_SR_IO_ERROR 0x01 +#define IOACCEL2_STATUS_SR_IO_ABORTED 0x02 +#define IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE 0x03 +#define IOACCEL2_STATUS_SR_INVALID_DEVICE 0x04 +#define IOACCEL2_STATUS_SR_UNDERRUN 0x51 +#define IOACCEL2_STATUS_SR_OVERRUN 0x75 u8 data_present; /* low 2 bits */ #define IOACCEL2_NO_DATAPRESENT 0x000 #define IOACCEL2_RESPONSE_DATAPRESENT 0x001 @@ -567,6 +594,7 @@ struct io_accel2_cmd { #define IOACCEL2_DIR_NO_DATA 0x00 #define IOACCEL2_DIR_DATA_IN 0x01 #define IOACCEL2_DIR_DATA_OUT 0x02 +#define IOACCEL2_TMF_ABORT 0x01 /* * SCSI Task Management Request format for Accelerator Mode 2 */ @@ -575,13 +603,13 @@ struct hpsa_tmf_struct { u8 reply_queue; /* Reply Queue ID */ u8 tmf; /* Task Management Function */ u8 reserved1; /* byte 3 Reserved */ - u32 it_nexus; /* SCSI I-T Nexus */ + __le32 it_nexus; /* SCSI I-T Nexus */ u8 lun_id[8]; /* LUN ID for TMF request */ __le64 tag; /* cciss tag associated w/ request */ __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */ __le64 error_ptr; /* Error Pointer */ __le32 error_len; /* Error Length */ -}; +} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT); /* Configuration Table Structure */ struct HostWrite { |
