summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/ds2782_battery.c2
-rw-r--r--drivers/power/isp1704_charger.c2
-rw-r--r--drivers/power/max17040_battery.c5
-rw-r--r--drivers/power/reset/Kconfig2
-rw-r--r--drivers/power/reset/qnap-poweroff.c49
5 files changed, 42 insertions, 18 deletions
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index 563174891c90..041f9b638d28 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -192,7 +192,7 @@ static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
/*
* Voltage is measured in units of 1.22mV. The voltage is stored as
- * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ * a 12-bit number plus sign, in the upper bits of a 16-bit register
*/
err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
if (err)
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 80edb7d8cb54..0b4cf9d63291 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -444,8 +444,6 @@ static int isp1704_charger_probe(struct platform_device *pdev)
ret = PTR_ERR(isp->phy);
goto fail0;
}
- if (!isp->phy)
- goto fail0;
isp->dev = &pdev->dev;
platform_set_drvdata(pdev, isp);
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index c7ff6d67f158..0fbac861080d 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -148,7 +148,7 @@ static void max17040_get_online(struct i2c_client *client)
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (chip->pdata->battery_online)
+ if (chip->pdata && chip->pdata->battery_online)
chip->online = chip->pdata->battery_online();
else
chip->online = 1;
@@ -158,7 +158,8 @@ static void max17040_get_status(struct i2c_client *client)
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (!chip->pdata->charger_online || !chip->pdata->charger_enable) {
+ if (!chip->pdata || !chip->pdata->charger_online
+ || !chip->pdata->charger_enable) {
chip->status = POWER_SUPPLY_STATUS_UNKNOWN;
return;
}
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 6d452a78b19c..fa0e4e057b99 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -22,7 +22,7 @@ config POWER_RESET_GPIO
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
- depends on POWER_RESET && ARCH_MSM
+ depends on POWER_RESET && ARCH_QCOM
help
Power off and restart support for Qualcomm boards.
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
index 37f56f7ee926..a75db7f8a92f 100644
--- a/drivers/power/reset/qnap-poweroff.c
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -1,5 +1,5 @@
/*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
*
@@ -25,17 +25,43 @@
#define UART1_REG(x) (base + ((UART_##x) << 2))
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = &synology_power_off_cfg,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
static void __iomem *base;
static unsigned long tclk;
+static const struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
- /* 19200 baud divisor */
- const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
- /* hijack UART1 and reset into sane state (19200,8n1) */
+ /* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@@ -44,16 +70,21 @@ static void qnap_power_off(void)
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
char symname[KSYM_NAME_LEN];
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = match->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
@@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id qnap_power_off_of_match_table[] = {
- { .compatible = "qnap,power-off", },
- {}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
static struct platform_driver qnap_power_off_driver = {
.probe = qnap_power_off_probe,
.remove = qnap_power_off_remove,
OpenPOWER on IntegriCloud