diff options
Diffstat (limited to 'drivers/phy/qualcomm/phy-qcom-qmp.c')
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.c | 647 |
1 files changed, 446 insertions, 201 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index e17f0351ccc2..6470c5d61d1c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1,15 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #include <linux/clk.h> @@ -31,124 +22,7 @@ #include <dt-bindings/phy/phy.h> -/* QMP PHY QSERDES COM registers */ -#define QSERDES_COM_BG_TIMER 0x00c -#define QSERDES_COM_SSC_EN_CENTER 0x010 -#define QSERDES_COM_SSC_ADJ_PER1 0x014 -#define QSERDES_COM_SSC_ADJ_PER2 0x018 -#define QSERDES_COM_SSC_PER1 0x01c -#define QSERDES_COM_SSC_PER2 0x020 -#define QSERDES_COM_SSC_STEP_SIZE1 0x024 -#define QSERDES_COM_SSC_STEP_SIZE2 0x028 -#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN 0x034 -#define QSERDES_COM_CLK_ENABLE1 0x038 -#define QSERDES_COM_SYS_CLK_CTRL 0x03c -#define QSERDES_COM_SYSCLK_BUF_ENABLE 0x040 -#define QSERDES_COM_PLL_IVCO 0x048 -#define QSERDES_COM_LOCK_CMP1_MODE0 0x04c -#define QSERDES_COM_LOCK_CMP2_MODE0 0x050 -#define QSERDES_COM_LOCK_CMP3_MODE0 0x054 -#define QSERDES_COM_LOCK_CMP1_MODE1 0x058 -#define QSERDES_COM_LOCK_CMP2_MODE1 0x05c -#define QSERDES_COM_LOCK_CMP3_MODE1 0x060 -#define QSERDES_COM_BG_TRIM 0x070 -#define QSERDES_COM_CLK_EP_DIV 0x074 -#define QSERDES_COM_CP_CTRL_MODE0 0x078 -#define QSERDES_COM_CP_CTRL_MODE1 0x07c -#define QSERDES_COM_PLL_RCTRL_MODE0 0x084 -#define QSERDES_COM_PLL_RCTRL_MODE1 0x088 -#define QSERDES_COM_PLL_CCTRL_MODE0 0x090 -#define QSERDES_COM_PLL_CCTRL_MODE1 0x094 -#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8 -#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac -#define QSERDES_COM_RESETSM_CNTRL 0x0b4 -#define QSERDES_COM_RESTRIM_CTRL 0x0bc -#define QSERDES_COM_RESCODE_DIV_NUM 0x0c4 -#define QSERDES_COM_LOCK_CMP_EN 0x0c8 -#define QSERDES_COM_LOCK_CMP_CFG 0x0cc -#define QSERDES_COM_DEC_START_MODE0 0x0d0 -#define QSERDES_COM_DEC_START_MODE1 0x0d4 -#define QSERDES_COM_DIV_FRAC_START1_MODE0 0x0dc -#define QSERDES_COM_DIV_FRAC_START2_MODE0 0x0e0 -#define QSERDES_COM_DIV_FRAC_START3_MODE0 0x0e4 -#define QSERDES_COM_DIV_FRAC_START1_MODE1 0x0e8 -#define QSERDES_COM_DIV_FRAC_START2_MODE1 0x0ec -#define QSERDES_COM_DIV_FRAC_START3_MODE1 0x0f0 -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 0x108 -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 0x10c -#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 0x110 -#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 0x114 -#define QSERDES_COM_VCO_TUNE_CTRL 0x124 -#define QSERDES_COM_VCO_TUNE_MAP 0x128 -#define QSERDES_COM_VCO_TUNE1_MODE0 0x12c -#define QSERDES_COM_VCO_TUNE2_MODE0 0x130 -#define QSERDES_COM_VCO_TUNE1_MODE1 0x134 -#define QSERDES_COM_VCO_TUNE2_MODE1 0x138 -#define QSERDES_COM_VCO_TUNE_TIMER1 0x144 -#define QSERDES_COM_VCO_TUNE_TIMER2 0x148 -#define QSERDES_COM_BG_CTRL 0x170 -#define QSERDES_COM_CLK_SELECT 0x174 -#define QSERDES_COM_HSCLK_SEL 0x178 -#define QSERDES_COM_CORECLK_DIV 0x184 -#define QSERDES_COM_CORE_CLK_EN 0x18c -#define QSERDES_COM_C_READY_STATUS 0x190 -#define QSERDES_COM_CMN_CONFIG 0x194 -#define QSERDES_COM_SVS_MODE_CLK_SEL 0x19c -#define QSERDES_COM_DEBUG_BUS0 0x1a0 -#define QSERDES_COM_DEBUG_BUS1 0x1a4 -#define QSERDES_COM_DEBUG_BUS2 0x1a8 -#define QSERDES_COM_DEBUG_BUS3 0x1ac -#define QSERDES_COM_DEBUG_BUS_SEL 0x1b0 -#define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc - -/* QMP PHY TX registers */ -#define QSERDES_TX_RES_CODE_LANE_OFFSET 0x054 -#define QSERDES_TX_DEBUG_BUS_SEL 0x064 -#define QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN 0x068 -#define QSERDES_TX_LANE_MODE 0x094 -#define QSERDES_TX_RCV_DETECT_LVL_2 0x0ac - -/* QMP PHY RX registers */ -#define QSERDES_RX_UCDR_SO_GAIN_HALF 0x010 -#define QSERDES_RX_UCDR_SO_GAIN 0x01c -#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN 0x040 -#define QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE 0x048 -#define QSERDES_RX_RX_TERM_BW 0x090 -#define QSERDES_RX_RX_EQ_GAIN1_LSB 0x0c4 -#define QSERDES_RX_RX_EQ_GAIN1_MSB 0x0c8 -#define QSERDES_RX_RX_EQ_GAIN2_LSB 0x0cc -#define QSERDES_RX_RX_EQ_GAIN2_MSB 0x0d0 -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d8 -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3 0x0dc -#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4 0x0e0 -#define QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x108 -#define QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2 0x10c -#define QSERDES_RX_SIGDET_ENABLES 0x110 -#define QSERDES_RX_SIGDET_CNTRL 0x114 -#define QSERDES_RX_SIGDET_LVL 0x118 -#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL 0x11c -#define QSERDES_RX_RX_BAND 0x120 -#define QSERDES_RX_RX_INTERFACE_MODE 0x12c - -/* QMP PHY PCS registers */ -#define QPHY_POWER_DOWN_CONTROL 0x04 -#define QPHY_TXDEEMPH_M6DB_V0 0x24 -#define QPHY_TXDEEMPH_M3P5DB_V0 0x28 -#define QPHY_ENDPOINT_REFCLK_DRIVE 0x54 -#define QPHY_RX_IDLE_DTCT_CNTRL 0x58 -#define QPHY_POWER_STATE_CONFIG1 0x60 -#define QPHY_POWER_STATE_CONFIG2 0x64 -#define QPHY_POWER_STATE_CONFIG4 0x6c -#define QPHY_LOCK_DETECT_CONFIG1 0x80 -#define QPHY_LOCK_DETECT_CONFIG2 0x84 -#define QPHY_LOCK_DETECT_CONFIG3 0x88 -#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0 -#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4 -#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8 -#define QPHY_OSC_DTCT_ACTIONS 0x1AC -#define QPHY_RX_SIGDET_LVL 0x1D8 -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC -#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0 +#include "phy-qcom-qmp.h" /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) @@ -164,6 +38,34 @@ /* QPHY_COM_PCS_READY_STATUS bit */ #define PCS_READY BIT(0) +/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */ +/* DP PHY soft reset */ +#define SW_DPPHY_RESET BIT(0) +/* mux to select DP PHY reset control, 0:HW control, 1: software reset */ +#define SW_DPPHY_RESET_MUX BIT(1) +/* USB3 PHY soft reset */ +#define SW_USB3PHY_RESET BIT(2) +/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */ +#define SW_USB3PHY_RESET_MUX BIT(3) + +/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */ +#define USB3_MODE BIT(0) /* enables USB3 mode */ +#define DP_MODE BIT(1) /* enables DP mode */ + +/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */ +#define ARCVR_DTCT_EN BIT(0) +#define ALFPS_DTCT_EN BIT(1) +#define ARCVR_DTCT_EVENT_SEL BIT(4) + +/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */ +#define IRQ_CLEAR BIT(0) + +/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */ +#define RCVR_DETECT BIT(0) + +/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */ +#define CLAMP_EN BIT(0) /* enables i/o clamp_n */ + #define PHY_INIT_COMPLETE_TIMEOUT 1000 #define POWER_DOWN_DELAY_US_MIN 10 #define POWER_DOWN_DELAY_US_MAX 11 @@ -210,6 +112,9 @@ enum qphy_reg_layout { QPHY_SW_RESET, QPHY_START_CTRL, QPHY_PCS_READY_STATUS, + QPHY_PCS_AUTONOMOUS_MODE_CTRL, + QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR, + QPHY_PCS_LFPS_RXTERM_IRQ_STATUS, }; static const unsigned int pciephy_regs_layout[] = { @@ -237,6 +142,18 @@ static const unsigned int usb3phy_regs_layout[] = { [QPHY_SW_RESET] = 0x00, [QPHY_START_CTRL] = 0x08, [QPHY_PCS_READY_STATUS] = 0x17c, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8, + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178, +}; + +static const unsigned int qmp_v3_usb3phy_regs_layout[] = { + [QPHY_SW_RESET] = 0x00, + [QPHY_START_CTRL] = 0x08, + [QPHY_PCS_READY_STATUS] = 0x174, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc, + [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, }; static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { @@ -467,6 +384,112 @@ static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = { QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3), }; +static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x06), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75), +}; + +static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { + /* FLL settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), + + /* Lock Det settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xba), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), +}; + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { /* phy-type - PCIE/UFS/USB */ @@ -511,6 +534,12 @@ struct qmp_phy_cfg { /* power_down delay in usec */ int pwrdn_delay_min; int pwrdn_delay_max; + + /* true, if PHY has a separate DP_COM control block */ + bool has_phy_dp_com_ctrl; + /* Register offset of secondary tx/rx lanes for USB DP combo PHY */ + unsigned int tx_b_lane_offset; + unsigned int rx_b_lane_offset; }; /** @@ -520,6 +549,7 @@ struct qmp_phy_cfg { * @tx: iomapped memory space for lane's tx * @rx: iomapped memory space for lane's rx * @pcs: iomapped memory space for lane's pcs + * @pcs_misc: iomapped memory space for lane's pcs_misc * @pipe_clk: pipe lock * @index: lane index * @qmp: QMP phy to which this lane belongs @@ -530,6 +560,7 @@ struct qmp_phy { void __iomem *tx; void __iomem *rx; void __iomem *pcs; + void __iomem *pcs_misc; struct clk *pipe_clk; unsigned int index; struct qcom_qmp *qmp; @@ -541,6 +572,7 @@ struct qmp_phy { * * @dev: device * @serdes: iomapped memory space for phy's serdes + * @dp_com: iomapped memory space for phy's dp_com control block * * @clks: array of clocks required by phy * @resets: array of resets required by phy @@ -550,12 +582,15 @@ struct qmp_phy { * @phys: array of per-lane phy descriptors * @phy_mutex: mutex lock for PHY common block initialization * @init_count: phy common block initialization count + * @phy_initialized: indicate if PHY has been initialized + * @mode: current PHY mode */ struct qcom_qmp { struct device *dev; void __iomem *serdes; + void __iomem *dp_com; - struct clk **clks; + struct clk_bulk_data *clks; struct reset_control **resets; struct regulator_bulk_data *vregs; @@ -564,6 +599,8 @@ struct qcom_qmp { struct mutex phy_mutex; int init_count; + bool phy_initialized; + enum phy_mode mode; }; static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) @@ -595,6 +632,10 @@ static const char * const msm8996_phy_clk_l[] = { "aux", "cfg_ahb", "ref", }; +static const char * const qmp_v3_phy_clk_l[] = { + "aux", "cfg_ahb", "ref", "com_aux", +}; + /* list of resets */ static const char * const msm8996_pciephy_reset_l[] = { "phy", "common", "cfg", @@ -701,6 +742,38 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .pwrdn_delay_max = 1005, /* us */ }; +static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { + .type = PHY_TYPE_USB3, + .nlanes = 1, + + .serdes_tbl = qmp_v3_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), + .tx_tbl = qmp_v3_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl), + .rx_tbl = qmp_v3_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl), + .pcs_tbl = qmp_v3_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl), + .clk_list = qmp_v3_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = msm8996_phy_vreg_l, + .num_vregs = ARRAY_SIZE(msm8996_phy_vreg_l), + .regs = qmp_v3_usb3phy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN, + .mask_pcs_ready = PHYSTATUS, + + .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, + .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, + + .has_phy_dp_com_ctrl = true, + .tx_b_lane_offset = 0x400, + .rx_b_lane_offset = 0x400, +}; + static void qcom_qmp_phy_configure(void __iomem *base, const unsigned int *regs, const struct qmp_phy_init_tbl tbl[], @@ -724,44 +797,20 @@ static int qcom_qmp_phy_poweron(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; - int num = qmp->cfg->num_vregs; int ret; - dev_vdbg(&phy->dev, "Powering on QMP phy\n"); - - /* turn on regulator supplies */ - ret = regulator_bulk_enable(num, qmp->vregs); - if (ret) { - dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret); - return ret; - } - ret = clk_prepare_enable(qphy->pipe_clk); - if (ret) { + if (ret) dev_err(qmp->dev, "pipe_clk enable failed, err=%d\n", ret); - regulator_bulk_disable(num, qmp->vregs); - return ret; - } - return 0; -} - -static int qcom_qmp_phy_poweroff(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - - clk_disable_unprepare(qphy->pipe_clk); - - regulator_bulk_disable(qmp->cfg->num_vregs, qmp->vregs); - - return 0; + return ret; } static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) { const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *serdes = qmp->serdes; + void __iomem *dp_com = qmp->dp_com; int ret, i; mutex_lock(&qmp->phy_mutex); @@ -770,7 +819,23 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) return 0; } + /* turn on regulator supplies */ + ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs); + if (ret) { + dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret); + goto err_reg_enable; + } + for (i = 0; i < cfg->num_resets; i++) { + ret = reset_control_assert(qmp->resets[i]); + if (ret) { + dev_err(qmp->dev, "%s reset assert failed\n", + cfg->reset_list[i]); + goto err_rst_assert; + } + } + + for (i = cfg->num_resets - 1; i >= 0; i--) { ret = reset_control_deassert(qmp->resets[i]); if (ret) { dev_err(qmp->dev, "%s reset deassert failed\n", @@ -779,10 +844,33 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) } } + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); + if (ret) { + dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret); + goto err_rst; + } + if (cfg->has_phy_com_ctrl) qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL], SW_PWRDN); + if (cfg->has_phy_dp_com_ctrl) { + qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL, + SW_PWRDN); + /* override hardware control for reset of qmp phy */ + qphy_setbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL, + USB3_MODE | DP_MODE); + + /* bring both QMP USB and QMP DP PHYs PCS block out of reset */ + qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, + SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | + SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + } + /* Serdes configuration */ qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl, cfg->serdes_tbl_num); @@ -803,7 +891,7 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) if (ret) { dev_err(qmp->dev, "phy common block init timed-out\n"); - goto err_rst; + goto err_com_init; } } @@ -811,9 +899,14 @@ static int qcom_qmp_phy_com_init(struct qcom_qmp *qmp) return 0; +err_com_init: + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); err_rst: - while (--i >= 0) + while (++i < cfg->num_resets) reset_control_assert(qmp->resets[i]); +err_rst_assert: + regulator_bulk_disable(cfg->num_vregs, qmp->vregs); +err_reg_enable: mutex_unlock(&qmp->phy_mutex); return ret; @@ -843,6 +936,10 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) while (--i >= 0) reset_control_assert(qmp->resets[i]); + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); + + regulator_bulk_disable(cfg->num_vregs, qmp->vregs); + mutex_unlock(&qmp->phy_mutex); return 0; @@ -857,24 +954,16 @@ static int qcom_qmp_phy_init(struct phy *phy) void __iomem *tx = qphy->tx; void __iomem *rx = qphy->rx; void __iomem *pcs = qphy->pcs; + void __iomem *dp_com = qmp->dp_com; void __iomem *status; unsigned int mask, val; - int ret, i; + int ret; dev_vdbg(qmp->dev, "Initializing QMP phy\n"); - for (i = 0; i < qmp->cfg->num_clks; i++) { - ret = clk_prepare_enable(qmp->clks[i]); - if (ret) { - dev_err(qmp->dev, "failed to enable %s clk, err=%d\n", - qmp->cfg->clk_list[i], ret); - goto err_clk; - } - } - ret = qcom_qmp_phy_com_init(qmp); if (ret) - goto err_clk; + return ret; if (cfg->has_lane_rst) { ret = reset_control_deassert(qphy->lane_rst); @@ -887,7 +976,16 @@ static int qcom_qmp_phy_init(struct phy *phy) /* Tx, Rx, and PCS configurations */ qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num); + /* Configuration for other LANE for USB-DP combo PHY */ + if (cfg->has_phy_dp_com_ctrl) + qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs, + cfg->tx_tbl, cfg->tx_tbl_num); + qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num); + if (cfg->has_phy_dp_com_ctrl) + qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs, + cfg->rx_tbl, cfg->rx_tbl_num); + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); /* @@ -899,11 +997,13 @@ static int qcom_qmp_phy_init(struct phy *phy) if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); - /* start SerDes and Phy-Coding-Sublayer */ - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - /* Pull PHY out of reset state */ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (cfg->has_phy_dp_com_ctrl) + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); + + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; mask = cfg->mask_pcs_ready; @@ -914,6 +1014,7 @@ static int qcom_qmp_phy_init(struct phy *phy) dev_err(qmp->dev, "phy initialization timed-out\n"); goto err_pcs_ready; } + qmp->phy_initialized = true; return ret; @@ -922,9 +1023,6 @@ err_pcs_ready: reset_control_assert(qphy->lane_rst); err_lane_rst: qcom_qmp_phy_com_exit(qmp); -err_clk: - while (--i >= 0) - clk_disable_unprepare(qmp->clks[i]); return ret; } @@ -934,7 +1032,8 @@ static int qcom_qmp_phy_exit(struct phy *phy) struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; const struct qmp_phy_cfg *cfg = qmp->cfg; - int i = cfg->num_clks; + + clk_disable_unprepare(qphy->pipe_clk); /* PHY reset */ qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); @@ -950,8 +1049,127 @@ static int qcom_qmp_phy_exit(struct phy *phy) qcom_qmp_phy_com_exit(qmp); - while (--i >= 0) - clk_disable_unprepare(qmp->clks[i]); + qmp->phy_initialized = false; + + return 0; +} + +static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + + qmp->mode = mode; + + return 0; +} + +static void qcom_qmp_phy_enable_autonomous_mode(struct qmp_phy *qphy) +{ + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *pcs = qphy->pcs; + void __iomem *pcs_misc = qphy->pcs_misc; + u32 intr_mask; + + if (qmp->mode == PHY_MODE_USB_HOST_SS || + qmp->mode == PHY_MODE_USB_DEVICE_SS) + intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN; + else + intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL; + + /* Clear any pending interrupts status */ + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); + /* Writing 1 followed by 0 clears the interrupt */ + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); + + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], + ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL); + + /* Enable required PHY autonomous mode interrupts */ + qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask); + + /* Enable i/o clamp_n for autonomous mode */ + if (pcs_misc) + qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN); +} + +static void qcom_qmp_phy_disable_autonomous_mode(struct qmp_phy *qphy) +{ + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *pcs = qphy->pcs; + void __iomem *pcs_misc = qphy->pcs_misc; + + /* Disable i/o clamp_n on resume for normal mode */ + if (pcs_misc) + qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN); + + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], + ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN); + + qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); + /* Writing 1 followed by 0 clears the interrupt */ + qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); +} + +static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + struct qmp_phy *qphy = qmp->phys[0]; + const struct qmp_phy_cfg *cfg = qmp->cfg; + + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode); + + /* Supported only for USB3 PHY */ + if (cfg->type != PHY_TYPE_USB3) + return 0; + + if (!qmp->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } + + qcom_qmp_phy_enable_autonomous_mode(qphy); + + clk_disable_unprepare(qphy->pipe_clk); + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); + + return 0; +} + +static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev) +{ + struct qcom_qmp *qmp = dev_get_drvdata(dev); + struct qmp_phy *qphy = qmp->phys[0]; + const struct qmp_phy_cfg *cfg = qmp->cfg; + int ret = 0; + + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode); + + /* Supported only for USB3 PHY */ + if (cfg->type != PHY_TYPE_USB3) + return 0; + + if (!qmp->phy_initialized) { + dev_vdbg(dev, "PHY not initialized, bailing out\n"); + return 0; + } + + ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); + if (ret) { + dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret); + return ret; + } + + ret = clk_prepare_enable(qphy->pipe_clk); + if (ret) { + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret); + clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); + return ret; + } + + qcom_qmp_phy_disable_autonomous_mode(qphy); return 0; } @@ -1000,29 +1218,17 @@ static int qcom_qmp_phy_reset_init(struct device *dev) static int qcom_qmp_phy_clk_init(struct device *dev) { struct qcom_qmp *qmp = dev_get_drvdata(dev); - int ret, i; + int num = qmp->cfg->num_clks; + int i; - qmp->clks = devm_kcalloc(dev, qmp->cfg->num_clks, - sizeof(*qmp->clks), GFP_KERNEL); + qmp->clks = devm_kcalloc(dev, num, sizeof(*qmp->clks), GFP_KERNEL); if (!qmp->clks) return -ENOMEM; - for (i = 0; i < qmp->cfg->num_clks; i++) { - struct clk *_clk; - const char *name = qmp->cfg->clk_list[i]; - - _clk = devm_clk_get(dev, name); - if (IS_ERR(_clk)) { - ret = PTR_ERR(_clk); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to get %s clk, %d\n", - name, ret); - return ret; - } - qmp->clks[i] = _clk; - } + for (i = 0; i < num; i++) + qmp->clks[i].id = qmp->cfg->clk_list[i]; - return 0; + return devm_clk_bulk_get(dev, num, qmp->clks); } /* @@ -1078,7 +1284,7 @@ static const struct phy_ops qcom_qmp_phy_gen_ops = { .init = qcom_qmp_phy_init, .exit = qcom_qmp_phy_exit, .power_on = qcom_qmp_phy_poweron, - .power_off = qcom_qmp_phy_poweroff, + .set_mode = qcom_qmp_phy_set_mode, .owner = THIS_MODULE, }; @@ -1097,7 +1303,8 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) /* * Get memory resources for each phy lane: - * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2. + * Resources are indexed as: tx -> 0; rx -> 1; pcs -> 2; and + * pcs_misc (optional) -> 3. */ qphy->tx = of_iomap(np, 0); if (!qphy->tx) @@ -1111,6 +1318,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) if (!qphy->pcs) return -ENOMEM; + qphy->pcs_misc = of_iomap(np, 3); + if (!qphy->pcs_misc) + dev_vdbg(dev, "PHY pcs_misc-reg not used\n"); + /* * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3 * based phys, so they essentially have pipe clock. So, @@ -1169,11 +1380,19 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }, { .compatible = "qcom,ipq8074-qmp-pcie-phy", .data = &ipq8074_pciephy_cfg, + }, { + .compatible = "qcom,qmp-v3-usb3-phy", + .data = &qmp_v3_usb3phy_cfg, }, { }, }; MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table); +static const struct dev_pm_ops qcom_qmp_phy_pm_ops = { + SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend, + qcom_qmp_phy_runtime_resume, NULL) +}; + static int qcom_qmp_phy_probe(struct platform_device *pdev) { struct qcom_qmp *qmp; @@ -1192,6 +1411,11 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) qmp->dev = dev; dev_set_drvdata(dev, qmp); + /* Get the specific init parameters of QMP phy */ + qmp->cfg = of_device_get_match_data(dev); + if (!qmp->cfg) + return -EINVAL; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) @@ -1200,10 +1424,18 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) /* per PHY serdes; usually located at base address */ qmp->serdes = base; - mutex_init(&qmp->phy_mutex); + /* per PHY dp_com; if PHY has dp_com control block */ + if (qmp->cfg->has_phy_dp_com_ctrl) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "dp_com"); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); - /* Get the specific init parameters of QMP phy */ - qmp->cfg = of_device_get_match_data(dev); + qmp->dp_com = base; + } + + mutex_init(&qmp->phy_mutex); ret = qcom_qmp_phy_clk_init(dev); if (ret) @@ -1229,12 +1461,21 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) return -ENOMEM; id = 0; + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + /* + * Prevent runtime pm from being ON by default. Users can enable + * it using power/control in sysfs. + */ + pm_runtime_forbid(dev); + for_each_available_child_of_node(dev->of_node, child) { /* Create per-lane phy */ ret = qcom_qmp_phy_create(dev, child, id); if (ret) { dev_err(dev, "failed to create lane%d phy, %d\n", id, ret); + pm_runtime_disable(dev); return ret; } @@ -1246,6 +1487,7 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) if (ret) { dev_err(qmp->dev, "failed to register pipe clock source\n"); + pm_runtime_disable(dev); return ret; } id++; @@ -1254,6 +1496,8 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (!IS_ERR(phy_provider)) dev_info(dev, "Registered Qcom-QMP phy\n"); + else + pm_runtime_disable(dev); return PTR_ERR_OR_ZERO(phy_provider); } @@ -1262,6 +1506,7 @@ static struct platform_driver qcom_qmp_phy_driver = { .probe = qcom_qmp_phy_probe, .driver = { .name = "qcom-qmp-phy", + .pm = &qcom_qmp_phy_pm_ops, .of_match_table = qcom_qmp_phy_of_match_table, }, }; |
