summaryrefslogtreecommitdiffstats
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/controller/Kconfig1
-rw-r--r--drivers/pci/controller/vmd.c7
-rw-r--r--drivers/pci/hotplug/pciehp_ctrl.c4
-rw-r--r--drivers/pci/pci-driver.c14
-rw-r--r--drivers/pci/pci.c19
-rw-r--r--drivers/pci/pcie/Kconfig8
-rw-r--r--drivers/pci/pcie/Makefile2
-rw-r--r--drivers/pci/pcie/portdrv.h4
-rw-r--r--drivers/pci/pcie/portdrv_core.c3
-rw-r--r--drivers/pci/quirks.c6
-rw-r--r--drivers/pci/switch/switchtec.c2
11 files changed, 49 insertions, 21 deletions
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 6012f3059acd..011c57cae4b0 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -267,6 +267,7 @@ config PCIE_TANGO_SMP8759
config VMD
depends on PCI_MSI && X86_64 && SRCU
+ select X86_DEV_DMA_OPS
tristate "Intel Volume Management Device Driver"
---help---
Adds support for the Intel Volume Management Device (VMD). VMD is a
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index cf6816b55b5e..999a5509e57e 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -95,10 +95,8 @@ struct vmd_dev {
struct irq_domain *irq_domain;
struct pci_bus *bus;
-#ifdef CONFIG_X86_DEV_DMA_OPS
struct dma_map_ops dma_ops;
struct dma_domain dma_domain;
-#endif
};
static inline struct vmd_dev *vmd_from_bus(struct pci_bus *bus)
@@ -293,7 +291,6 @@ static struct msi_domain_info vmd_msi_domain_info = {
.chip = &vmd_msi_controller,
};
-#ifdef CONFIG_X86_DEV_DMA_OPS
/*
* VMD replaces the requester ID with its own. DMA mappings for devices in a
* VMD domain need to be mapped for the VMD, not the device requiring
@@ -438,10 +435,6 @@ static void vmd_setup_dma_ops(struct vmd_dev *vmd)
add_dma_domain(domain);
}
#undef ASSIGN_VMD_DMA_OPS
-#else
-static void vmd_teardown_dma_ops(struct vmd_dev *vmd) {}
-static void vmd_setup_dma_ops(struct vmd_dev *vmd) {}
-#endif
static char __iomem *vmd_cfg_addr(struct vmd_dev *vmd, struct pci_bus *bus,
unsigned int devfn, int reg, int len)
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 3f3df4c29f6e..905282a8ddaa 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -115,6 +115,10 @@ static void remove_board(struct controller *ctrl, bool safe_removal)
* removed from the slot/adapter.
*/
msleep(1000);
+
+ /* Ignore link or presence changes caused by power off */
+ atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC),
+ &ctrl->pending_events);
}
/* turn off Green LED */
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 71853befd435..cae630fe6387 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -578,7 +578,7 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
&& pci_dev->current_state != PCI_UNKNOWN) {
WARN_ONCE(pci_dev->current_state != prev,
- "PCI PM: Device state not saved by %pF\n",
+ "PCI PM: Device state not saved by %pS\n",
drv->suspend);
}
}
@@ -605,7 +605,7 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state)
if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
&& pci_dev->current_state != PCI_UNKNOWN) {
WARN_ONCE(pci_dev->current_state != prev,
- "PCI PM: Device state not saved by %pF\n",
+ "PCI PM: Device state not saved by %pS\n",
drv->suspend_late);
goto Fixup;
}
@@ -773,7 +773,7 @@ static int pci_pm_suspend(struct device *dev)
if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
&& pci_dev->current_state != PCI_UNKNOWN) {
WARN_ONCE(pci_dev->current_state != prev,
- "PCI PM: State of device not saved by %pF\n",
+ "PCI PM: State of device not saved by %pS\n",
pm->suspend);
}
}
@@ -821,7 +821,7 @@ static int pci_pm_suspend_noirq(struct device *dev)
if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0
&& pci_dev->current_state != PCI_UNKNOWN) {
WARN_ONCE(pci_dev->current_state != prev,
- "PCI PM: State of device not saved by %pF\n",
+ "PCI PM: State of device not saved by %pS\n",
pm->suspend_noirq);
goto Fixup;
}
@@ -1260,11 +1260,11 @@ static int pci_pm_runtime_suspend(struct device *dev)
* log level.
*/
if (error == -EBUSY || error == -EAGAIN) {
- dev_dbg(dev, "can't suspend now (%pf returned %d)\n",
+ dev_dbg(dev, "can't suspend now (%ps returned %d)\n",
pm->runtime_suspend, error);
return error;
} else if (error) {
- dev_err(dev, "can't suspend (%pf returned %d)\n",
+ dev_err(dev, "can't suspend (%ps returned %d)\n",
pm->runtime_suspend, error);
return error;
}
@@ -1276,7 +1276,7 @@ static int pci_pm_runtime_suspend(struct device *dev)
&& !pci_dev->state_saved && pci_dev->current_state != PCI_D0
&& pci_dev->current_state != PCI_UNKNOWN) {
WARN_ONCE(pci_dev->current_state != prev,
- "PCI PM: State of device not saved by %pF\n",
+ "PCI PM: State of device not saved by %pS\n",
pm->runtime_suspend);
return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7c1b362f599a..766f5779db92 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -6262,8 +6262,7 @@ static int __init pci_setup(char *str)
} else if (!strncmp(str, "pcie_scan_all", 13)) {
pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
} else if (!strncmp(str, "disable_acs_redir=", 18)) {
- disable_acs_redir_param =
- kstrdup(str + 18, GFP_KERNEL);
+ disable_acs_redir_param = str + 18;
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
@@ -6274,3 +6273,19 @@ static int __init pci_setup(char *str)
return 0;
}
early_param("pci", pci_setup);
+
+/*
+ * 'disable_acs_redir_param' is initialized in pci_setup(), above, to point
+ * to data in the __initdata section which will be freed after the init
+ * sequence is complete. We can't allocate memory in pci_setup() because some
+ * architectures do not have any memory allocation service available during
+ * an early_param() call. So we allocate memory and copy the variable here
+ * before the init section is freed.
+ */
+static int __init pci_realloc_setup_params(void)
+{
+ disable_acs_redir_param = kstrdup(disable_acs_redir_param, GFP_KERNEL);
+
+ return 0;
+}
+pure_initcall(pci_realloc_setup_params);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 5cbdbca904ac..362eb8cfa53b 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -142,3 +142,11 @@ config PCIE_PTM
This is only useful if you have devices that support PTM, but it
is safe to enable even if you don't.
+
+config PCIE_BW
+ bool "PCI Express Bandwidth Change Notification"
+ depends on PCIEPORTBUS
+ help
+ This enables PCI Express Bandwidth Change Notification. If
+ you know link width or rate changes occur only to correct
+ unreliable links, you may answer Y.
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index f1d7bc1e5efa..efb9d2e71e9e 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -3,7 +3,6 @@
# Makefile for PCI Express features and port driver
pcieportdrv-y := portdrv_core.o portdrv_pci.o err.o
-pcieportdrv-y += bw_notification.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
@@ -13,3 +12,4 @@ obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
obj-$(CONFIG_PCIE_PME) += pme.o
obj-$(CONFIG_PCIE_DPC) += dpc.o
obj-$(CONFIG_PCIE_PTM) += ptm.o
+obj-$(CONFIG_PCIE_BW) += bw_notification.o
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index 1d50dc58ac40..944827a8c7d3 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -49,7 +49,11 @@ int pcie_dpc_init(void);
static inline int pcie_dpc_init(void) { return 0; }
#endif
+#ifdef CONFIG_PCIE_BW
int pcie_bandwidth_notification_init(void);
+#else
+static inline int pcie_bandwidth_notification_init(void) { return 0; }
+#endif
/* Port Type */
#define PCIE_ANY_PORT (~0)
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 7d04f9d087a6..1b330129089f 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -55,7 +55,8 @@ static int pcie_message_numbers(struct pci_dev *dev, int mask,
* 7.8.2, 7.10.10, 7.31.2.
*/
- if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) {
+ if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP |
+ PCIE_PORT_SERVICE_BWNOTIF)) {
pcie_capability_read_word(dev, PCI_EXP_FLAGS, &reg16);
*pme = (reg16 & PCI_EXP_FLAGS_IRQ) >> 9;
nvec = *pme + 1;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a59ad09ce911..eb0afc275901 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -36,7 +36,7 @@ static ktime_t fixup_debug_start(struct pci_dev *dev,
void (*fn)(struct pci_dev *dev))
{
if (initcall_debug)
- pci_info(dev, "calling %pF @ %i\n", fn, task_pid_nr(current));
+ pci_info(dev, "calling %pS @ %i\n", fn, task_pid_nr(current));
return ktime_get();
}
@@ -51,7 +51,7 @@ static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
if (initcall_debug || duration > 10000)
- pci_info(dev, "%pF took %lld usecs\n", fn, duration);
+ pci_info(dev, "%pS took %lld usecs\n", fn, duration);
}
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
@@ -3877,6 +3877,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128,
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130,
quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9170,
+ quirk_dma_func1_alias);
/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172,
quirk_dma_func1_alias);
diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c
index e22766c79fe9..0f7b80144863 100644
--- a/drivers/pci/switch/switchtec.c
+++ b/drivers/pci/switch/switchtec.c
@@ -390,7 +390,7 @@ static int switchtec_dev_open(struct inode *inode, struct file *filp)
return PTR_ERR(stuser);
filp->private_data = stuser;
- nonseekable_open(inode, filp);
+ stream_open(inode, filp);
dev_dbg(&stdev->dev, "%s: %p\n", __func__, stuser);
OpenPOWER on IntegriCloud