diff options
Diffstat (limited to 'drivers/pci/pcie')
| -rw-r--r-- | drivers/pci/pcie/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/pci/pcie/Makefile | 2 | ||||
| -rw-r--r-- | drivers/pci/pcie/aer/Kconfig.debug | 4 | ||||
| -rw-r--r-- | drivers/pci/pcie/aer/aer_inject.c | 34 | ||||
| -rw-r--r-- | drivers/pci/pcie/aer/aerdrv.c | 2 | ||||
| -rw-r--r-- | drivers/pci/pcie/aer/aerdrv_acpi.c | 2 | ||||
| -rw-r--r-- | drivers/pci/pcie/aer/aerdrv_core.c | 6 | ||||
| -rw-r--r-- | drivers/pci/pcie/aer/aerdrv_errprint.c | 4 | ||||
| -rw-r--r-- | drivers/pci/pcie/aspm.c | 4 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme/Makefile | 8 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme/pcie_pme.c | 505 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme/pcie_pme.h | 28 | ||||
| -rw-r--r-- | drivers/pci/pcie/pme/pcie_pme_acpi.c | 54 | ||||
| -rw-r--r-- | drivers/pci/pcie/portdrv.h | 17 | ||||
| -rw-r--r-- | drivers/pci/pcie/portdrv_core.c | 29 | ||||
| -rw-r--r-- | drivers/pci/pcie/portdrv_pci.c | 46 |
16 files changed, 712 insertions, 37 deletions
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig index 5a0c6ad53f8e..b8b494b3e0d0 100644 --- a/drivers/pci/pcie/Kconfig +++ b/drivers/pci/pcie/Kconfig @@ -46,3 +46,7 @@ config PCIEASPM_DEBUG help This enables PCI Express ASPM debug support. It will add per-device interface to control ASPM. + +config PCIE_PME + def_bool y + depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile index 11f6bb1eae24..ea654545e7c4 100644 --- a/drivers/pci/pcie/Makefile +++ b/drivers/pci/pcie/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o # Build PCI Express AER if needed obj-$(CONFIG_PCIEAER) += aer/ + +obj-$(CONFIG_PCIE_PME) += pme/ diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug index b8c925c1f6aa..9142949734f5 100644 --- a/drivers/pci/pcie/aer/Kconfig.debug +++ b/drivers/pci/pcie/aer/Kconfig.debug @@ -3,14 +3,14 @@ # config PCIEAER_INJECT - tristate "PCIE AER error injector support" + tristate "PCIe AER error injector support" depends on PCIEAER default n help This enables PCI Express Root Port Advanced Error Reporting (AER) software error injector. - Debuging PCIE AER code is quite difficult because it is hard + Debugging PCIe AER code is quite difficult because it is hard to trigger various real hardware errors. Software based error injection can fake almost all kinds of errors with the help of a user space helper tool aer-inject, which can be diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 7fcd5331b14c..223052b73563 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -1,7 +1,7 @@ /* - * PCIE AER software error injection support. + * PCIe AER software error injection support. * - * Debuging PCIE AER code is quite difficult because it is hard to + * Debuging PCIe AER code is quite difficult because it is hard to * trigger various real hardware errors. Software based error * injection can fake almost all kinds of errors with the help of a * user space helper tool aer-inject, which can be gotten from: @@ -321,7 +321,7 @@ static int aer_inject(struct aer_error_inj *einj) unsigned long flags; unsigned int devfn = PCI_DEVFN(einj->dev, einj->fn); int pos_cap_err, rp_pos_cap_err; - u32 sever; + u32 sever, cor_mask, uncor_mask; int ret = 0; dev = pci_get_domain_bus_and_slot((int)einj->domain, einj->bus, devfn); @@ -339,6 +339,9 @@ static int aer_inject(struct aer_error_inj *einj) goto out_put; } pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_SEVER, &sever); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_COR_MASK, &cor_mask); + pci_read_config_dword(dev, pos_cap_err + PCI_ERR_UNCOR_MASK, + &uncor_mask); rp_pos_cap_err = pci_find_ext_capability(rpdev, PCI_EXT_CAP_ID_ERR); if (!rp_pos_cap_err) { @@ -374,6 +377,21 @@ static int aer_inject(struct aer_error_inj *einj) err->header_log2 = einj->header_log2; err->header_log3 = einj->header_log3; + if (einj->cor_status && !(einj->cor_status & ~cor_mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The correctable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + if (einj->uncor_status && !(einj->uncor_status & ~uncor_mask)) { + ret = -EINVAL; + printk(KERN_WARNING "The uncorrectable error(s) is masked " + "by device\n"); + spin_unlock_irqrestore(&inject_lock, flags); + goto out_put; + } + rperr = __find_aer_error_by_dev(rpdev); if (!rperr) { rperr = rperr_alloc; @@ -413,8 +431,14 @@ static int aer_inject(struct aer_error_inj *einj) if (ret) goto out_put; - if (find_aer_device(rpdev, &edev)) + if (find_aer_device(rpdev, &edev)) { + if (!get_service_data(edev)) { + printk(KERN_WARNING "AER service is not initialized\n"); + ret = -EINVAL; + goto out_put; + } aer_irq(-1, edev); + } else ret = -EINVAL; out_put: @@ -484,5 +508,5 @@ static void __exit aer_inject_exit(void) module_init(aer_inject_init); module_exit(aer_inject_exit); -MODULE_DESCRIPTION("PCIE AER software error injector"); +MODULE_DESCRIPTION("PCIe AER software error injector"); MODULE_LICENSE("GPL"); diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 97a345927b55..21f215f4daa3 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev) mutex_init(&rpc->rpc_mutex); init_waitqueue_head(&rpc->wait_release); - /* Use PCIE bus function to store rpc into PCIE device */ + /* Use PCIe bus function to store rpc into PCIe device */ set_service_data(dev, rpc); return rpc; diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 8edb2f300e8f..04814087658d 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -24,7 +24,7 @@ * * @return: Zero on success. Nonzero otherwise. * - * Invoked when PCIE bus loads AER service driver. To avoid conflict with + * Invoked when PCIe bus loads AER service driver. To avoid conflict with * BIOS AER support requires BIOS to yield AER control to OS native driver. **/ int aer_osc_setup(struct pcie_device *pciedev) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index ae672ca80333..c843a799814d 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -587,7 +587,7 @@ static void handle_error_source(struct pcie_device *aerdev, * aer_enable_rootport - enable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus loads AER service driver. + * Invoked when PCIe bus loads AER service driver. */ void aer_enable_rootport(struct aer_rpc *rpc) { @@ -597,7 +597,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) u32 reg32; pos = pci_pcie_cap(pdev); - /* Clear PCIE Capability's Device Status */ + /* Clear PCIe Capability's Device Status */ pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16); pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16); @@ -631,7 +631,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) * disable_root_aer - disable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus unloads AER service driver. + * Invoked when PCIe bus unloads AER service driver. */ static void disable_root_aer(struct aer_rpc *rpc) { diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 44acde72294f..9d3e4c8d0184 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) if (info->status == 0) { AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=Unaccessible, " + "PCIe Bus Error: severity=%s, type=Unaccessible, " "id=%04x(Unregistered Agent ID)\n", aer_error_severity_string[info->severity], id); } else { @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) agent = AER_GET_AGENT(info->severity, info->status); AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n", + "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", aer_error_severity_string[info->severity], aer_error_layer[layer], id, aer_agent_string[agent]); diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5a01fc7fbf05..be53d98fa384 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1,6 +1,6 @@ /* * File: drivers/pci/pcie/aspm.c - * Enabling PCIE link L0s/L1 state and Clock Power Management + * Enabling PCIe link L0s/L1 state and Clock Power Management * * Copyright (C) 2007 Intel * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) @@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; /* - * Some functions in a slot might not all be PCIE functions, + * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot */ list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { diff --git a/drivers/pci/pcie/pme/Makefile b/drivers/pci/pcie/pme/Makefile new file mode 100644 index 000000000000..8b9238053080 --- /dev/null +++ b/drivers/pci/pcie/pme/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for PCI-Express Root Port PME signaling driver +# + +obj-$(CONFIG_PCIE_PME) += pmedriver.o + +pmedriver-objs := pcie_pme.o +pmedriver-$(CONFIG_ACPI) += pcie_pme_acpi.o diff --git a/drivers/pci/pcie/pme/pcie_pme.c b/drivers/pci/pcie/pme/pcie_pme.c new file mode 100644 index 000000000000..7b3cbff547ee --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.c @@ -0,0 +1,505 @@ +/* + * PCIe Native PME support + * + * Copyright (C) 2007 - 2009 Intel Corp + * Copyright (C) 2007 - 2009 Shaohua Li <shaohua.li@intel.com> + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/pcieport_if.h> +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +#include <linux/pm_runtime.h> + +#include "../../pci.h" +#include "pcie_pme.h" + +#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ + +/* + * If set, this switch will prevent the PCIe root port PME service driver from + * being registered. Consequently, the interrupt-based PCIe PME signaling will + * not be used by any PCIe root ports in that case. + */ +static bool pcie_pme_disabled; + +/* + * The PCI Express Base Specification 2.0, Section 6.1.8, states the following: + * "In order to maintain compatibility with non-PCI Express-aware system + * software, system power management logic must be configured by firmware to use + * the legacy mechanism of signaling PME by default. PCI Express-aware system + * software must notify the firmware prior to enabling native, interrupt-based + * PME signaling." However, if the platform doesn't provide us with a suitable + * notification mechanism or the notification fails, it is not clear whether or + * not we are supposed to use the interrupt-based PCIe PME signaling. The + * switch below can be used to indicate the desired behaviour. When set, it + * will make the kernel use the interrupt-based PCIe PME signaling regardless of + * the platform notification status, although the kernel will attempt to notify + * the platform anyway. When unset, it will prevent the kernel from using the + * the interrupt-based PCIe PME signaling if the platform notification fails, + * which is the default. + */ +static bool pcie_pme_force_enable; + +/* + * If this switch is set, MSI will not be used for PCIe PME signaling. This + * causes the PCIe port driver to use INTx interrupts only, but it turns out + * that using MSI for PCIe PME signaling doesn't play well with PCIe PME-based + * wake-up from system sleep states. + */ +bool pcie_pme_msi_disabled; + +static int __init pcie_pme_setup(char *str) +{ + if (!strcmp(str, "off")) + pcie_pme_disabled = true; + else if (!strcmp(str, "force")) + pcie_pme_force_enable = true; + else if (!strcmp(str, "nomsi")) + pcie_pme_msi_disabled = true; + return 1; +} +__setup("pcie_pme=", pcie_pme_setup); + +/** + * pcie_pme_platform_setup - Ensure that the kernel controls the PCIe PME. + * @srv: PCIe PME root port service to use for carrying out the check. + * + * Notify the platform that the native PCIe PME is going to be used and return + * 'true' if the control of the PCIe PME registers has been acquired from the + * platform. + */ +static bool pcie_pme_platform_setup(struct pcie_device *srv) +{ + if (!pcie_pme_platform_notify(srv)) + return true; + return pcie_pme_force_enable; +} + +struct pcie_pme_service_data { + spinlock_t lock; + struct pcie_device *srv; + struct work_struct work; + bool noirq; /* Don't enable the PME interrupt used by this service. */ +}; + +/** + * pcie_pme_interrupt_enable - Enable/disable PCIe PME interrupt generation. + * @dev: PCIe root port or event collector. + * @enable: Enable or disable the interrupt. + */ +static void pcie_pme_interrupt_enable(struct pci_dev *dev, bool enable) +{ + int rtctl_pos; + u16 rtctl; + + rtctl_pos = pci_pcie_cap(dev) + PCI_EXP_RTCTL; + + pci_read_config_word(dev, rtctl_pos, &rtctl); + if (enable) + rtctl |= PCI_EXP_RTCTL_PMEIE; + else + rtctl &= ~PCI_EXP_RTCTL_PMEIE; + pci_write_config_word(dev, rtctl_pos, rtctl); +} + +/** + * pcie_pme_clear_status - Clear root port PME interrupt status. + * @dev: PCIe root port or event collector. + */ +static void pcie_pme_clear_status(struct pci_dev *dev) +{ + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(dev) + PCI_EXP_RTSTA; + + pci_read_config_dword(dev, rtsta_pos, &rtsta); + rtsta |= PCI_EXP_RTSTA_PME; + pci_write_config_dword(dev, rtsta_pos, rtsta); +} + +/** + * pcie_pme_walk_bus - Scan a PCI bus for devices asserting PME#. + * @bus: PCI bus to scan. + * + * Scan given PCI bus and all buses under it for devices asserting PME#. + */ +static bool pcie_pme_walk_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + bool ret = false; + + list_for_each_entry(dev, &bus->devices, bus_list) { + /* Skip PCIe devices in case we started from a root port. */ + if (!pci_is_pcie(dev) && pci_check_pme_status(dev)) { + pm_request_resume(&dev->dev); + ret = true; + } + + if (dev->subordinate && pcie_pme_walk_bus(dev->subordinate)) + ret = true; + } + + return ret; +} + +/** + * pcie_pme_from_pci_bridge - Check if PCIe-PCI bridge generated a PME. + * @bus: Secondary bus of the bridge. + * @devfn: Device/function number to check. + * + * PME from PCI devices under a PCIe-PCI bridge may be converted to an in-band + * PCIe PME message. In such that case the bridge should use the Requester ID + * of device/function number 0 on its secondary bus. + */ +static bool pcie_pme_from_pci_bridge(struct pci_bus *bus, u8 devfn) +{ + struct pci_dev *dev; + bool found = false; + + if (devfn) + return false; + + dev = pci_dev_get(bus->self); + if (!dev) + return false; + + if (pci_is_pcie(dev) && dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) { + down_read(&pci_bus_sem); + if (pcie_pme_walk_bus(bus)) + found = true; + up_read(&pci_bus_sem); + } + + pci_dev_put(dev); + return found; +} + +/** + * pcie_pme_handle_request - Find device that generated PME and handle it. + * @port: Root port or event collector that generated the PME interrupt. + * @req_id: PCIe Requester ID of the device that generated the PME. + */ +static void pcie_pme_handle_request(struct pci_dev *port, u16 req_id) +{ + u8 busnr = req_id >> 8, devfn = req_id & 0xff; + struct pci_bus *bus; + struct pci_dev *dev; + bool found = false; + + /* First, check if the PME is from the root port itself. */ + if (port->devfn == devfn && port->bus->number == busnr) { + if (pci_check_pme_status(port)) { + pm_request_resume(&port->dev); + found = true; + } else { + /* + * Apparently, the root port generated the PME on behalf + * of a non-PCIe device downstream. If this is done by + * a root port, the Requester ID field in its status + * register may contain either the root port's, or the + * source device's information (PCI Express Base + * Specification, Rev. 2.0, Section 6.1.9). + */ + down_read(&pci_bus_sem); + found = pcie_pme_walk_bus(port->subordinate); + up_read(&pci_bus_sem); + } + goto out; + } + + /* Second, find the bus the source device is on. */ + bus = pci_find_bus(pci_domain_nr(port->bus), busnr); + if (!bus) + goto out; + + /* Next, check if the PME is from a PCIe-PCI bridge. */ + found = pcie_pme_from_pci_bridge(bus, devfn); + if (found) + goto out; + + /* Finally, try to find the PME source on the bus. */ + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_dev_get(dev); + if (dev->devfn == devfn) { + found = true; + break; + } + pci_dev_put(dev); + } + up_read(&pci_bus_sem); + + if (found) { + /* The device is there, but we have to check its PME status. */ + found = pci_check_pme_status(dev); + if (found) + pm_request_resume(&dev->dev); + pci_dev_put(dev); + } else if (devfn) { + /* + * The device is not there, but we can still try to recover by + * assuming that the PME was reported by a PCIe-PCI bridge that + * used devfn different from zero. + */ + dev_dbg(&port->dev, "PME interrupt generated for " + "non-existent device %02x:%02x.%d\n", + busnr, PCI_SLOT(devfn), PCI_FUNC(devfn)); + found = pcie_pme_from_pci_bridge(bus, 0); + } + + out: + if (!found) + dev_dbg(&port->dev, "Spurious native PME interrupt!\n"); +} + +/** + * pcie_pme_work_fn - Work handler for PCIe PME interrupt. + * @work: Work structure giving access to service data. + */ +static void pcie_pme_work_fn(struct work_struct *work) +{ + struct pcie_pme_service_data *data = + container_of(work, struct pcie_pme_service_data, work); + struct pci_dev *port = data->srv->port; + int rtsta_pos; + u32 rtsta; + + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; + + spin_lock_irq(&data->lock); + + for (;;) { + if (data->noirq) + break; + + pci_read_config_dword(port, rtsta_pos, &rtsta); + if (rtsta & PCI_EXP_RTSTA_PME) { + /* + * Clear PME status of the port. If there are other + * pending PMEs, the status will be set again. + */ + pcie_pme_clear_status(port); + + spin_unlock_irq(&data->lock); + pcie_pme_handle_request(port, rtsta & 0xffff); + spin_lock_irq(&data->lock); + + continue; + } + + /* No need to loop if there are no more PMEs pending. */ + if (!(rtsta & PCI_EXP_RTSTA_PENDING)) + break; + + spin_unlock_irq(&data->lock); + cpu_relax(); + spin_lock_irq(&data->lock); + } + + if (!data->noirq) + pcie_pme_interrupt_enable(port, true); + + spin_unlock_irq(&data->lock); +} + +/** + * pcie_pme_irq - Interrupt handler for PCIe root port PME interrupt. + * @irq: Interrupt vector. + * @context: Interrupt context pointer. + */ +static irqreturn_t pcie_pme_irq(int irq, void *context) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int rtsta_pos; + u32 rtsta; + unsigned long flags; + + port = ((struct pcie_device *)context)->port; + data = get_service_data((struct pcie_device *)context); + + rtsta_pos = pci_pcie_cap(port) + PCI_EXP_RTSTA; + + spin_lock_irqsave(&data->lock, flags); + pci_read_config_dword(port, rtsta_pos, &rtsta); + + if (!(rtsta & PCI_EXP_RTSTA_PME)) { + spin_unlock_irqrestore(&data->lock, flags); + return IRQ_NONE; + } + + pcie_pme_interrupt_enable(port, false); + spin_unlock_irqrestore(&data->lock, flags); + + /* We don't use pm_wq, because it's freezable. */ + schedule_work(&data->work); + + return IRQ_HANDLED; +} + +/** + * pcie_pme_set_native - Set the PME interrupt flag for given device. + * @dev: PCI device to handle. + * @ign: Ignored. + */ +static int pcie_pme_set_native(struct pci_dev *dev, void *ign) +{ + dev_info(&dev->dev, "Signaling PME through PCIe PME interrupt\n"); + + device_set_run_wake(&dev->dev, true); + dev->pme_interrupt = true; + return 0; +} + +/** + * pcie_pme_mark_devices - Set the PME interrupt flag for devices below a port. + * @port: PCIe root port or event collector to handle. + * + * For each device below given root port, including the port itself (or for each + * root complex integrated endpoint if @port is a root complex event collector) + * set the flag indicating that it can signal run-time wake-up events via PCIe + * PME interrupts. + */ +static void pcie_pme_mark_devices(struct pci_dev *port) +{ + pcie_pme_set_native(port, NULL); + if (port->subordinate) { + pci_walk_bus(port->subordinate, pcie_pme_set_native, NULL); + } else { + struct pci_bus *bus = port->bus; + struct pci_dev *dev; + + /* Check if this is a root port event collector. */ + if (port->pcie_type != PCI_EXP_TYPE_RC_EC || !bus) + return; + + down_read(&pci_bus_sem); + list_for_each_entry(dev, &bus->devices, bus_list) + if (pci_is_pcie(dev) + && dev->pcie_type == PCI_EXP_TYPE_RC_END) + pcie_pme_set_native(dev, NULL); + up_read(&pci_bus_sem); + } +} + +/** + * pcie_pme_probe - Initialize PCIe PME service for given root port. + * @srv: PCIe service to initialize. + */ +static int pcie_pme_probe(struct pcie_device *srv) +{ + struct pci_dev *port; + struct pcie_pme_service_data *data; + int ret; + + if (!pcie_pme_platform_setup(srv)) + return -EACCES; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + INIT_WORK(&data->work, pcie_pme_work_fn); + data->srv = srv; + set_service_data(srv, data); + + port = srv->port; + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + + ret = request_irq(srv->irq, pcie_pme_irq, IRQF_SHARED, "PCIe PME", srv); + if (ret) { + kfree(data); + } else { + pcie_pme_mark_devices(port); + pcie_pme_interrupt_enable(port, true); + } + + return ret; +} + +/** + * pcie_pme_suspend - Suspend PCIe PME service device. + * @srv: PCIe service device to suspend. + */ +static int pcie_pme_suspend(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + pcie_pme_interrupt_enable(port, false); + pcie_pme_clear_status(port); + data->noirq = true; + spin_unlock_irq(&data->lock); + + synchronize_irq(srv->irq); + + return 0; +} + +/** + * pcie_pme_resume - Resume PCIe PME service device. + * @srv - PCIe service device to resume. + */ +static int pcie_pme_resume(struct pcie_device *srv) +{ + struct pcie_pme_service_data *data = get_service_data(srv); + struct pci_dev *port = srv->port; + + spin_lock_irq(&data->lock); + data->noirq = false; + pcie_pme_clear_status(port); + pcie_pme_interrupt_enable(port, true); + spin_unlock_irq(&data->lock); + + return 0; +} + +/** + * pcie_pme_remove - Prepare PCIe PME service device for removal. + * @srv - PCIe service device to resume. + */ +static void pcie_pme_remove(struct pcie_device *srv) +{ + pcie_pme_suspend(srv); + free_irq(srv->irq, srv); + kfree(get_service_data(srv)); +} + +static struct pcie_port_service_driver pcie_pme_driver = { + .name = "pcie_pme", + .port_type = PCI_EXP_TYPE_ROOT_PORT, + .service = PCIE_PORT_SERVICE_PME, + + .probe = pcie_pme_probe, + .suspend = pcie_pme_suspend, + .resume = pcie_pme_resume, + .remove = pcie_pme_remove, +}; + +/** + * pcie_pme_service_init - Register the PCIe PME service driver. + */ +static int __init pcie_pme_service_init(void) +{ + return pcie_pme_disabled ? + -ENODEV : pcie_port_service_register(&pcie_pme_driver); +} + +module_init(pcie_pme_service_init); diff --git a/drivers/pci/pcie/pme/pcie_pme.h b/drivers/pci/pcie/pme/pcie_pme.h new file mode 100644 index 000000000000..b30d2b7c9775 --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme.h @@ -0,0 +1,28 @@ +/* + * drivers/pci/pcie/pme/pcie_pme.h + * + * PCI Express Root Port PME signaling support + * + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + */ + +#ifndef _PCIE_PME_H_ +#define _PCIE_PME_H_ + +struct pcie_device; + +#ifdef CONFIG_ACPI +extern int pcie_pme_acpi_setup(struct pcie_device *srv); + +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return pcie_pme_acpi_setup(srv); +} +#else /* !CONFIG_ACPI */ +static inline int pcie_pme_platform_notify(struct pcie_device *srv) +{ + return 0; +} +#endif /* !CONFIG_ACPI */ + +#endif diff --git a/drivers/pci/pcie/pme/pcie_pme_acpi.c b/drivers/pci/pcie/pme/pcie_pme_acpi.c new file mode 100644 index 000000000000..83ab2287ae3f --- /dev/null +++ b/drivers/pci/pcie/pme/pcie_pme_acpi.c @@ -0,0 +1,54 @@ +/* + * PCIe Native PME support, ACPI-related part + * + * Copyright (C) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License V2. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +#include <linux/pcieport_if.h> + +/** + * pcie_pme_acpi_setup - Request the ACPI BIOS to release control over PCIe PME. + * @srv - PCIe PME service for a root port or event collector. + * + * Invoked when the PCIe bus type loads PCIe PME service driver. To avoid + * conflict with the BIOS PCIe support requires the BIOS to yield PCIe PME + * control to the kernel. + */ +int pcie_pme_acpi_setup(struct pcie_device *srv) +{ + acpi_status status = AE_NOT_FOUND; + struct pci_dev *port = srv->port; + acpi_handle handle; + int error = 0; + + if (acpi_pci_disabled) + return -ENOSYS; + + dev_info(&port->dev, "Requesting control of PCIe PME from ACPI BIOS\n"); + + handle = acpi_find_root_bridge_handle(port); + if (!handle) + return -EINVAL; + + status = acpi_pci_osc_control_set(handle, + OSC_PCI_EXPRESS_PME_CONTROL | + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + if (ACPI_FAILURE(status)) { + dev_info(&port->dev, + "Failed to receive control of PCIe PME service: %s\n", + (status == AE_SUPPORT || status == AE_NOT_FOUND) ? + "no _OSC support" : "ACPI _OSC failed"); + error = -ENODEV; + } + + return error; +} diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index aaeb9d21cba5..813a5c3427b6 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -30,4 +30,21 @@ extern void pcie_port_device_remove(struct pci_dev *dev); extern int __must_check pcie_port_bus_register(void); extern void pcie_port_bus_unregister(void); +#ifdef CONFIG_PCIE_PME +extern bool pcie_pme_msi_disabled; + +static inline void pcie_pme_disable_msi(void) +{ + pcie_pme_msi_disabled = true; +} + +static inline bool pcie_pme_no_msi(void) +{ + return pcie_pme_msi_disabled; +} +#else /* !CONFIG_PCIE_PME */ +static inline void pcie_pme_disable_msi(void) {} +static inline bool pcie_pme_no_msi(void) { return false; } +#endif /* !CONFIG_PCIE_PME */ + #endif /* _PORTDRV_H_ */ diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 413262eb95b7..e73effbe402c 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -27,7 +27,7 @@ */ static void release_pcie_device(struct device *dev) { - kfree(to_pcie_device(dev)); + kfree(to_pcie_device(dev)); } /** @@ -186,16 +186,24 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask) */ static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask) { - int i, irq; + int i, irq = -1; + + /* We have to use INTx if MSI cannot be used for PCIe PME. */ + if ((mask & PCIE_PORT_SERVICE_PME) && pcie_pme_no_msi()) { + if (dev->pin) + irq = dev->irq; + goto no_msi; + } /* Try to use MSI-X if supported */ if (!pcie_port_enable_msix(dev, irqs, mask)) return 0; + /* We're not going to use MSI-X, so try MSI and fall back to INTx */ - irq = -1; if (!pci_enable_msi(dev) || dev->pin) irq = dev->irq; + no_msi: for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) irqs[i] = irq; irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1; @@ -277,6 +285,7 @@ static int pcie_device_init(struct pci_dev *pdev, int service, int irq) pci_name(pdev), get_descriptor_id(pdev->pcie_type, service)); device->parent = &pdev->dev; + device_enable_async_suspend(device); retval = device_register(device); if (retval) @@ -346,12 +355,11 @@ static int suspend_iter(struct device *dev, void *data) { struct pcie_port_service_driver *service_driver; - if ((dev->bus == &pcie_port_bus_type) && - (dev->driver)) { - service_driver = to_service_driver(dev->driver); - if (service_driver->suspend) - service_driver->suspend(to_pcie_device(dev)); - } + if ((dev->bus == &pcie_port_bus_type) && dev->driver) { + service_driver = to_service_driver(dev->driver); + if (service_driver->suspend) + service_driver->suspend(to_pcie_device(dev)); + } return 0; } @@ -494,6 +502,7 @@ int pcie_port_service_register(struct pcie_port_service_driver *new) return driver_register(&new->driver); } +EXPORT_SYMBOL(pcie_port_service_register); /** * pcie_port_service_unregister - unregister PCI Express port service driver @@ -503,6 +512,4 @@ void pcie_port_service_unregister(struct pcie_port_service_driver *drv) { driver_unregister(&drv->driver); } - -EXPORT_SYMBOL(pcie_port_service_register); EXPORT_SYMBOL(pcie_port_service_unregister); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index a49452e2aed9..127e8f169d9c 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/pcieport_if.h> #include <linux/aer.h> +#include <linux/dmi.h> #include "portdrv.h" #include "aer/aerdrv.h" @@ -24,7 +25,7 @@ */ #define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" -#define DRIVER_DESC "PCIE Port Bus Driver" +#define DRIVER_DESC "PCIe Port Bus Driver" MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); @@ -63,7 +64,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = { * pcie_portdrv_probe - Probe PCI-Express port devices * @dev: PCI-Express port device being probed * - * If detected invokes the pcie_port_device_register() method for + * If detected invokes the pcie_port_device_register() method for * this port device. * */ @@ -78,7 +79,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, (dev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))) return -ENODEV; - if (!dev->irq && dev->pin) { + if (!dev->irq && dev->pin) { dev_warn(&dev->dev, "device [%04x:%04x] has invalid IRQ; " "check vendor BIOS\n", dev->vendor, dev->device); } @@ -91,7 +92,7 @@ static int __devinit pcie_portdrv_probe(struct pci_dev *dev, return 0; } -static void pcie_portdrv_remove (struct pci_dev *dev) +static void pcie_portdrv_remove(struct pci_dev *dev) { pcie_port_device_remove(dev); pci_disable_device(dev); @@ -129,14 +130,13 @@ static int error_detected_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev, enum pci_channel_state error) { - struct aer_broadcast_data result_data = - {error, PCI_ERS_RESULT_CAN_RECOVER}; - int retval; + struct aer_broadcast_data data = {error, PCI_ERS_RESULT_CAN_RECOVER}; + int ret; /* can not fail */ - retval = device_for_each_child(&dev->dev, &result_data, error_detected_iter); + ret = device_for_each_child(&dev->dev, &data, error_detected_iter); - return result_data.result; + return data.result; } static int mmio_enabled_iter(struct device *device, void *data) @@ -274,10 +274,36 @@ static struct pci_driver pcie_portdriver = { .driver.pm = PCIE_PORTDRV_PM_OPS, }; +static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d) +{ + pr_notice("%s detected: will not use MSI for PCIe PME signaling\n", + d->ident); + pcie_pme_disable_msi(); + return 0; +} + +static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = { + /* + * Boxes that should not use MSI for PCIe PME signaling. + */ + { + .callback = dmi_pcie_pme_disable_msi, + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, + "MICRO-STAR INTERNATIONAL CO., LTD"), + DMI_MATCH(DMI_PRODUCT_NAME, "U-100"), + }, + }, + {} +}; + static int __init pcie_portdrv_init(void) { int retval; + dmi_check_system(pcie_portdrv_dmi_table); + retval = pcie_port_bus_register(); if (retval) { printk(KERN_WARNING "PCIE: bus_register error: %d\n", retval); @@ -290,7 +316,7 @@ static int __init pcie_portdrv_init(void) return retval; } -static void __exit pcie_portdrv_exit(void) +static void __exit pcie_portdrv_exit(void) { pci_unregister_driver(&pcie_portdriver); pcie_port_bus_unregister(); |
