summaryrefslogtreecommitdiffstats
path: root/drivers/pci/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/host')
-rw-r--r--drivers/pci/host/pci-mvebu.c92
-rw-r--r--drivers/pci/host/pci-rcar-gen2.c8
-rw-r--r--drivers/pci/host/pci-tegra.c7
-rw-r--r--drivers/pci/host/pcie-designware.c20
4 files changed, 102 insertions, 25 deletions
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index d3d1cfd51e09..e384e2534594 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -293,6 +293,58 @@ static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port,
return PCIBIOS_SUCCESSFUL;
}
+/*
+ * Remove windows, starting from the largest ones to the smallest
+ * ones.
+ */
+static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
+ phys_addr_t base, size_t size)
+{
+ while (size) {
+ size_t sz = 1 << (fls(size) - 1);
+
+ mvebu_mbus_del_window(base, sz);
+ base += sz;
+ size -= sz;
+ }
+}
+
+/*
+ * MBus windows can only have a power of two size, but PCI BARs do not
+ * have this constraint. Therefore, we have to split the PCI BAR into
+ * areas each having a power of two size. We start from the largest
+ * one (i.e highest order bit set in the size).
+ */
+static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
+ unsigned int target, unsigned int attribute,
+ phys_addr_t base, size_t size,
+ phys_addr_t remap)
+{
+ size_t size_mapped = 0;
+
+ while (size) {
+ size_t sz = 1 << (fls(size) - 1);
+ int ret;
+
+ ret = mvebu_mbus_add_window_remap_by_id(target, attribute, base,
+ sz, remap);
+ if (ret) {
+ dev_err(&port->pcie->pdev->dev,
+ "Could not create MBus window at 0x%x, size 0x%x: %d\n",
+ base, sz, ret);
+ mvebu_pcie_del_windows(port, base - size_mapped,
+ size_mapped);
+ return;
+ }
+
+ size -= sz;
+ size_mapped += sz;
+ base += sz;
+ if (remap != MVEBU_MBUS_NO_REMAP)
+ remap += sz;
+ }
+}
+
static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
{
phys_addr_t iobase;
@@ -304,8 +356,8 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
/* If a window was configured, remove it */
if (port->iowin_base) {
- mvebu_mbus_del_window(port->iowin_base,
- port->iowin_size);
+ mvebu_pcie_del_windows(port, port->iowin_base,
+ port->iowin_size);
port->iowin_base = 0;
port->iowin_size = 0;
}
@@ -331,11 +383,11 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
port->iowin_base = port->pcie->io.start + iobase;
port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) |
(port->bridge.iolimitupper << 16)) -
- iobase);
+ iobase) + 1;
- mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr,
- port->iowin_base, port->iowin_size,
- iobase);
+ mvebu_pcie_add_windows(port, port->io_target, port->io_attr,
+ port->iowin_base, port->iowin_size,
+ iobase);
}
static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
@@ -346,8 +398,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
/* If a window was configured, remove it */
if (port->memwin_base) {
- mvebu_mbus_del_window(port->memwin_base,
- port->memwin_size);
+ mvebu_pcie_del_windows(port, port->memwin_base,
+ port->memwin_size);
port->memwin_base = 0;
port->memwin_size = 0;
}
@@ -364,10 +416,11 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16);
port->memwin_size =
(((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
- port->memwin_base;
+ port->memwin_base + 1;
- mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr,
- port->memwin_base, port->memwin_size);
+ mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr,
+ port->memwin_base, port->memwin_size,
+ MVEBU_MBUS_NO_REMAP);
}
/*
@@ -743,14 +796,21 @@ static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev,
/*
* On the PCI-to-PCI bridge side, the I/O windows must have at
- * least a 64 KB size and be aligned on their size, and the
- * memory windows must have at least a 1 MB size and be
- * aligned on their size
+ * least a 64 KB size and the memory windows must have at
+ * least a 1 MB size. Moreover, MBus windows need to have a
+ * base address aligned on their size, and their size must be
+ * a power of two. This means that if the BAR doesn't have a
+ * power of two size, several MBus windows will actually be
+ * created. We need to ensure that the biggest MBus window
+ * (which will be the first one) is aligned on its size, which
+ * explains the rounddown_pow_of_two() being done here.
*/
if (res->flags & IORESOURCE_IO)
- return round_up(start, max_t(resource_size_t, SZ_64K, size));
+ return round_up(start, max_t(resource_size_t, SZ_64K,
+ rounddown_pow_of_two(size)));
else if (res->flags & IORESOURCE_MEM)
- return round_up(start, max_t(resource_size_t, SZ_1M, size));
+ return round_up(start, max_t(resource_size_t, SZ_1M,
+ rounddown_pow_of_two(size)));
else
return start;
}
diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c
index fd3e3ab56509..4fe349dcaf59 100644
--- a/drivers/pci/host/pci-rcar-gen2.c
+++ b/drivers/pci/host/pci-rcar-gen2.c
@@ -15,6 +15,7 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
@@ -180,8 +181,13 @@ static int rcar_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pci_sys_data *sys = dev->bus->sysdata;
struct rcar_pci_priv *priv = sys->private_data;
+ int irq;
+
+ irq = of_irq_parse_and_map_pci(dev, slot, pin);
+ if (!irq)
+ irq = priv->irq;
- return priv->irq;
+ return irq;
}
#ifdef CONFIG_PCI_DEBUG
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 330f7e3a32dd..083cf37ca047 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -639,10 +639,15 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
{
struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata);
+ int irq;
tegra_cpuidle_pcie_irqs_in_use();
- return pcie->irq;
+ irq = of_irq_parse_and_map_pci(pdev, slot, pin);
+ if (!irq)
+ irq = pcie->irq;
+
+ return irq;
}
static void tegra_pcie_add_bus(struct pci_bus *bus)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 509a29d84509..c4e373294476 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/of_address.h>
+#include <linux/of_pci.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
#include <linux/types.h>
@@ -490,7 +491,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
dw_pci.nr_controllers = 1;
dw_pci.private_data = (void **)&pp;
- pci_common_init(&dw_pci);
+ pci_common_init_dev(pp->dev, &dw_pci);
pci_assign_unassigned_resources();
#ifdef CONFIG_PCI_DOMAINS
dw_pci.domain++;
@@ -520,13 +521,13 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
PCIE_ATU_LIMIT);
dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
+ dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
}
static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
@@ -535,7 +536,6 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
@@ -543,6 +543,7 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
PCIE_ATU_UPPER_TARGET);
+ dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
}
static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
@@ -551,7 +552,6 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
PCIE_ATU_VIEWPORT);
dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
- dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
@@ -559,6 +559,7 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
PCIE_ATU_UPPER_TARGET);
+ dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
}
static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
@@ -723,7 +724,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
if (pp) {
pp->root_bus_nr = sys->busnr;
- bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
+ bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
sys, &sys->resources);
} else {
bus = NULL;
@@ -736,8 +737,13 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
+ int irq;
+
+ irq = of_irq_parse_and_map_pci(dev, slot, pin);
+ if (!irq)
+ irq = pp->irq;
- return pp->irq;
+ return irq;
}
static void dw_pcie_add_bus(struct pci_bus *bus)
@@ -764,7 +770,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
u32 membase;
u32 memlimit;
- /* set the number of lines as 4 */
+ /* set the number of lanes */
dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
val &= ~PORT_LINK_MODE_MASK;
switch (pp->lanes) {
OpenPOWER on IntegriCloud