summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/8139too.c1
-rw-r--r--drivers/net/Kconfig3
-rw-r--r--drivers/net/bna/bnad.c7
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c6
-rw-r--r--drivers/net/can/Kconfig4
-rw-r--r--drivers/net/cxgb3/sge.c4
-rw-r--r--drivers/net/greth.c7
-rw-r--r--drivers/net/hamradio/6pack.c4
-rw-r--r--drivers/net/hamradio/mkiss.c4
-rw-r--r--drivers/net/natsemi.c3
-rw-r--r--drivers/net/ppp_deflate.c5
-rw-r--r--drivers/net/qlge/qlge.h3
-rw-r--r--drivers/net/qlge/qlge_main.c40
-rw-r--r--drivers/net/r8169.c2
-rw-r--r--drivers/net/rionet.c28
-rw-r--r--drivers/net/usb/kalmia.c42
-rw-r--r--drivers/net/usb/zaurus.c10
-rw-r--r--drivers/net/vmxnet3/vmxnet3_drv.c135
-rw-r--r--drivers/net/vmxnet3/vmxnet3_int.h4
-rw-r--r--drivers/net/wireless/ath/ath5k/eeprom.c8
-rw-r--r--drivers/net/wireless/ath/ath9k/pci.c6
21 files changed, 195 insertions, 131 deletions
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index ed6355cc5261..c2672c692d6f 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -993,6 +993,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev,
* features
*/
dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+ dev->vlan_features = dev->features;
dev->irq = pdev->irq;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f5919c28a4b8..4d68a264df9b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -3415,7 +3415,8 @@ config NETCONSOLE
config NETCONSOLE_DYNAMIC
bool "Dynamic reconfiguration of logging targets"
- depends on NETCONSOLE && SYSFS && CONFIGFS_FS
+ depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
+ !(NETCONSOLE=y && CONFIGFS_FS=m)
help
This option enables the ability to dynamically reconfigure target
parameters (interface, IP addresses, port numbers, MAC addresses)
diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c
index 7d25a97d33f6..44e219c910da 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/bna/bnad.c
@@ -1111,7 +1111,7 @@ bnad_mbox_irq_alloc(struct bnad *bnad,
struct bna_intr_info *intr_info)
{
int err = 0;
- unsigned long flags;
+ unsigned long irq_flags = 0, flags;
u32 irq;
irq_handler_t irq_handler;
@@ -1125,18 +1125,17 @@ bnad_mbox_irq_alloc(struct bnad *bnad,
if (bnad->cfg_flags & BNAD_CF_MSIX) {
irq_handler = (irq_handler_t)bnad_msix_mbox_handler;
irq = bnad->msix_table[bnad->msix_num - 1].vector;
- flags = 0;
intr_info->intr_type = BNA_INTR_T_MSIX;
intr_info->idl[0].vector = bnad->msix_num - 1;
} else {
irq_handler = (irq_handler_t)bnad_isr;
irq = bnad->pcidev->irq;
- flags = IRQF_SHARED;
+ irq_flags = IRQF_SHARED;
intr_info->intr_type = BNA_INTR_T_INTX;
/* intr_info->idl.vector = 0 ? */
}
spin_unlock_irqrestore(&bnad->bna_lock, flags);
-
+ flags = irq_flags;
sprintf(bnad->mbox_irq_name, "%s", BNAD_NAME);
/*
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 98604350a811..5b4a8f34b13c 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -50,6 +50,7 @@
#include <linux/zlib.h>
#include <linux/io.h>
#include <linux/stringify.h>
+#include <linux/vmalloc.h>
#include "bnx2x.h"
#include "bnx2x_init.h"
@@ -5152,8 +5153,7 @@ static int bnx2x_gunzip_init(struct bnx2x *bp)
if (bp->strm == NULL)
goto gunzip_nomem2;
- bp->strm->workspace = kmalloc(zlib_inflate_workspacesize(),
- GFP_KERNEL);
+ bp->strm->workspace = vmalloc(zlib_inflate_workspacesize());
if (bp->strm->workspace == NULL)
goto gunzip_nomem3;
@@ -5177,7 +5177,7 @@ gunzip_nomem1:
static void bnx2x_gunzip_end(struct bnx2x *bp)
{
if (bp->strm) {
- kfree(bp->strm->workspace);
+ vfree(bp->strm->workspace);
kfree(bp->strm);
bp->strm = NULL;
}
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 906366b54037..f6c98fb4a517 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -34,7 +34,7 @@ config CAN_SLCAN
config CAN_DEV
tristate "Platform CAN drivers with Netlink support"
depends on CAN
- default Y
+ default y
---help---
Enables the common framework for platform CAN drivers with Netlink
support. This is the standard library for CAN drivers.
@@ -43,7 +43,7 @@ config CAN_DEV
config CAN_CALC_BITTIMING
bool "CAN bit-timing calculation"
depends on CAN_DEV
- default Y
+ default y
---help---
If enabled, CAN bit-timing parameters will be calculated for the
bit-rate specified via Netlink argument "bitrate" when the device
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 3f562ba2f0c9..76bf5892b962 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -2026,7 +2026,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else
skb_checksum_none_assert(skb);
- skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
+ skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]);
if (unlikely(p->vlan_valid)) {
struct vlan_group *grp = pi->vlan_grp;
@@ -2145,7 +2145,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs,
if (!complete)
return;
- skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
+ skb_record_rx_queue(skb, qs - &adap->sge.qs[pi->first_qset]);
if (unlikely(cpl->vlan_valid)) {
struct vlan_group *grp = pi->vlan_grp;
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 82c3767ec5f8..16ce45c11934 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -1017,11 +1017,10 @@ static int greth_set_mac_add(struct net_device *dev, void *p)
return -EINVAL;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ GRETH_REGSAVE(regs->esa_msb, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
+ GRETH_REGSAVE(regs->esa_lsb, dev->dev_addr[2] << 24 | dev->dev_addr[3] << 16 |
+ dev->dev_addr[4] << 8 | dev->dev_addr[5]);
- GRETH_REGSAVE(regs->esa_msb, addr->sa_data[0] << 8 | addr->sa_data[1]);
- GRETH_REGSAVE(regs->esa_lsb,
- addr->sa_data[2] << 24 | addr->
- sa_data[3] << 16 | addr->sa_data[4] << 8 | addr->sa_data[5]);
return 0;
}
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 3e5d0b6b6516..0d283781bc5e 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -692,10 +692,10 @@ static void sixpack_close(struct tty_struct *tty)
{
struct sixpack *sp;
- write_lock(&disc_data_lock);
+ write_lock_bh(&disc_data_lock);
sp = tty->disc_data;
tty->disc_data = NULL;
- write_unlock(&disc_data_lock);
+ write_unlock_bh(&disc_data_lock);
if (!sp)
return;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 4c628393c8b1..bc02968cee16 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -813,10 +813,10 @@ static void mkiss_close(struct tty_struct *tty)
{
struct mkiss *ax;
- write_lock(&disc_data_lock);
+ write_lock_bh(&disc_data_lock);
ax = tty->disc_data;
tty->disc_data = NULL;
- write_unlock(&disc_data_lock);
+ write_unlock_bh(&disc_data_lock);
if (!ax)
return;
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b78be088c4ad..8f8b65af9ed5 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -2360,7 +2360,8 @@ static void netdev_rx(struct net_device *dev, int *work_done, int work_to_do)
PCI_DMA_FROMDEVICE);
} else {
pci_unmap_single(np->pci_dev, np->rx_dma[entry],
- buflen, PCI_DMA_FROMDEVICE);
+ buflen + NATSEMI_PADDING,
+ PCI_DMA_FROMDEVICE);
skb_put(skb = np->rx_skbuff[entry], pkt_len);
np->rx_skbuff[entry] = NULL;
}
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c
index 31e9407a0739..1dbdf82a6dfd 100644
--- a/drivers/net/ppp_deflate.c
+++ b/drivers/net/ppp_deflate.c
@@ -305,7 +305,7 @@ static void z_decomp_free(void *arg)
if (state) {
zlib_inflateEnd(&state->strm);
- kfree(state->strm.workspace);
+ vfree(state->strm.workspace);
kfree(state);
}
}
@@ -345,8 +345,7 @@ static void *z_decomp_alloc(unsigned char *options, int opt_len)
state->w_size = w_size;
state->strm.next_out = NULL;
- state->strm.workspace = kmalloc(zlib_inflate_workspacesize(),
- GFP_KERNEL|__GFP_REPEAT);
+ state->strm.workspace = vmalloc(zlib_inflate_workspacesize());
if (state->strm.workspace == NULL)
goto out_free;
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 7d8483f9012e..794252c0aedd 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -17,7 +17,7 @@
*/
#define DRV_NAME "qlge"
#define DRV_STRING "QLogic 10 Gigabit PCI-E Ethernet Driver "
-#define DRV_VERSION "v1.00.00.27.00.00-01"
+#define DRV_VERSION "v1.00.00.29.00.00-01"
#define WQ_ADDR_ALIGN 0x3 /* 4 byte alignment */
@@ -1997,6 +1997,7 @@ enum {
QL_LB_LINK_UP = 10,
QL_FRC_COREDUMP = 11,
QL_EEH_FATAL = 12,
+ QL_ASIC_RECOVERY = 14, /* We are in ascic recovery. */
};
/* link_status bit definitions */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index be89610f16a8..68fbfac7a3bf 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2152,6 +2152,10 @@ void ql_queue_asic_error(struct ql_adapter *qdev)
* thread
*/
clear_bit(QL_ADAPTER_UP, &qdev->flags);
+ /* Set asic recovery bit to indicate reset process that we are
+ * in fatal error recovery process rather than normal close
+ */
+ set_bit(QL_ASIC_RECOVERY, &qdev->flags);
queue_delayed_work(qdev->workqueue, &qdev->asic_reset_work, 0);
}
@@ -2166,23 +2170,20 @@ static void ql_process_chip_ae_intr(struct ql_adapter *qdev,
return;
case CAM_LOOKUP_ERR_EVENT:
- netif_err(qdev, link, qdev->ndev,
- "Multiple CAM hits lookup occurred.\n");
- netif_err(qdev, drv, qdev->ndev,
- "This event shouldn't occur.\n");
+ netdev_err(qdev->ndev, "Multiple CAM hits lookup occurred.\n");
+ netdev_err(qdev->ndev, "This event shouldn't occur.\n");
ql_queue_asic_error(qdev);
return;
case SOFT_ECC_ERROR_EVENT:
- netif_err(qdev, rx_err, qdev->ndev,
- "Soft ECC error detected.\n");
+ netdev_err(qdev->ndev, "Soft ECC error detected.\n");
ql_queue_asic_error(qdev);
break;
case PCI_ERR_ANON_BUF_RD:
- netif_err(qdev, rx_err, qdev->ndev,
- "PCI error occurred when reading anonymous buffers from rx_ring %d.\n",
- ib_ae_rsp->q_id);
+ netdev_err(qdev->ndev, "PCI error occurred when reading "
+ "anonymous buffers from rx_ring %d.\n",
+ ib_ae_rsp->q_id);
ql_queue_asic_error(qdev);
break;
@@ -2437,11 +2438,10 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
*/
if (var & STS_FE) {
ql_queue_asic_error(qdev);
- netif_err(qdev, intr, qdev->ndev,
- "Got fatal error, STS = %x.\n", var);
+ netdev_err(qdev->ndev, "Got fatal error, STS = %x.\n", var);
var = ql_read32(qdev, ERR_STS);
- netif_err(qdev, intr, qdev->ndev,
- "Resetting chip. Error Status Register = 0x%x\n", var);
+ netdev_err(qdev->ndev, "Resetting chip. "
+ "Error Status Register = 0x%x\n", var);
return IRQ_HANDLED;
}
@@ -3818,11 +3818,17 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
end_jiffies = jiffies +
max((unsigned long)1, usecs_to_jiffies(30));
- /* Stop management traffic. */
- ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+ /* Check if bit is set then skip the mailbox command and
+ * clear the bit, else we are in normal reset process.
+ */
+ if (!test_bit(QL_ASIC_RECOVERY, &qdev->flags)) {
+ /* Stop management traffic. */
+ ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
- /* Wait for the NIC and MGMNT FIFOs to empty. */
- ql_wait_fifo_empty(qdev);
+ /* Wait for the NIC and MGMNT FIFOs to empty. */
+ ql_wait_fifo_empty(qdev);
+ } else
+ clear_bit(QL_ASIC_RECOVERY, &qdev->flags);
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index fbd68383ca60..ef1a43dd145b 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -753,7 +753,7 @@ static void rtl8168_oob_notify(struct rtl8169_private *tp, u8 cmd)
msleep(2);
for (i = 0; i < 5; i++) {
udelay(100);
- if (!(RTL_R32(ERIDR) & ERIAR_FLAG))
+ if (!(RTL_R32(ERIAR) & ERIAR_FLAG))
break;
}
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c
index bcdc54f2fe55..86ac38c96bcf 100644
--- a/drivers/net/rionet.c
+++ b/drivers/net/rionet.c
@@ -378,7 +378,7 @@ static int rionet_close(struct net_device *ndev)
static void rionet_remove(struct rio_dev *rdev)
{
- struct net_device *ndev = NULL;
+ struct net_device *ndev = rio_get_drvdata(rdev);
struct rionet_peer *peer, *tmp;
free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
@@ -433,22 +433,12 @@ static const struct net_device_ops rionet_netdev_ops = {
.ndo_set_mac_address = eth_mac_addr,
};
-static int rionet_setup_netdev(struct rio_mport *mport)
+static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
{
int rc = 0;
- struct net_device *ndev = NULL;
struct rionet_private *rnet;
u16 device_id;
- /* Allocate our net_device structure */
- ndev = alloc_etherdev(sizeof(struct rionet_private));
- if (ndev == NULL) {
- printk(KERN_INFO "%s: could not allocate ethernet device.\n",
- DRV_NAME);
- rc = -ENOMEM;
- goto out;
- }
-
rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
mport->sys_size ? __fls(sizeof(void *)) + 4 : 0);
if (!rionet_active) {
@@ -504,11 +494,21 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
int rc = -ENODEV;
u32 lpef, lsrc_ops, ldst_ops;
struct rionet_peer *peer;
+ struct net_device *ndev = NULL;
/* If local device is not rionet capable, give up quickly */
if (!rionet_capable)
goto out;
+ /* Allocate our net_device structure */
+ ndev = alloc_etherdev(sizeof(struct rionet_private));
+ if (ndev == NULL) {
+ printk(KERN_INFO "%s: could not allocate ethernet device.\n",
+ DRV_NAME);
+ rc = -ENOMEM;
+ goto out;
+ }
+
/*
* First time through, make sure local device is rionet
* capable, setup netdev, and set flags so this is skipped
@@ -529,7 +529,7 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
goto out;
}
- rc = rionet_setup_netdev(rdev->net->hport);
+ rc = rionet_setup_netdev(rdev->net->hport, ndev);
rionet_check = 1;
}
@@ -546,6 +546,8 @@ static int rionet_probe(struct rio_dev *rdev, const struct rio_device_id *id)
list_add_tail(&peer->node, &rionet_peers);
}
+ rio_set_drvdata(rdev, ndev);
+
out:
return rc;
}
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
index d965fb1e013e..a9b6c63d54e4 100644
--- a/drivers/net/usb/kalmia.c
+++ b/drivers/net/usb/kalmia.c
@@ -100,34 +100,42 @@ kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
static int
kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
{
- char init_msg_1[] =
+ const static char init_msg_1[] =
{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
0x00, 0x00 };
- char init_msg_2[] =
+ const static char init_msg_2[] =
{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
0x00, 0x00 };
- char receive_buf[28];
+ const static int buflen = 28;
+ char *usb_buf;
int status;
- status = kalmia_send_init_packet(dev, init_msg_1, sizeof(init_msg_1)
- / sizeof(init_msg_1[0]), receive_buf, 24);
+ usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
+ if (!usb_buf)
+ return -ENOMEM;
+
+ memcpy(usb_buf, init_msg_1, 12);
+ status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_1)
+ / sizeof(init_msg_1[0]), usb_buf, 24);
if (status != 0)
return status;
- status = kalmia_send_init_packet(dev, init_msg_2, sizeof(init_msg_2)
- / sizeof(init_msg_2[0]), receive_buf, 28);
+ memcpy(usb_buf, init_msg_2, 12);
+ status = kalmia_send_init_packet(dev, usb_buf, sizeof(init_msg_2)
+ / sizeof(init_msg_2[0]), usb_buf, 28);
if (status != 0)
return status;
- memcpy(ethernet_addr, receive_buf + 10, ETH_ALEN);
+ memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
+ kfree(usb_buf);
return status;
}
static int
kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
{
- u8 status;
+ int status;
u8 ethernet_addr[ETH_ALEN];
/* Don't bind to AT command interface */
@@ -190,7 +198,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
dev_kfree_skb_any(skb);
skb = skb2;
- done: header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
+done:
+ header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
@@ -201,9 +210,8 @@ kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
header_start[0] = 0x57;
header_start[1] = 0x44;
content_len = skb->len - KALMIA_HEADER_LENGTH;
- header_start[2] = (content_len & 0xff); /* low byte */
- header_start[3] = (content_len >> 8); /* high byte */
+ put_unaligned_le16(content_len, &header_start[2]);
header_start[4] = ether_type_1;
header_start[5] = ether_type_2;
@@ -231,13 +239,13 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
* Our task here is to strip off framing, leaving skb with one
* data frame for the usbnet framework code to process.
*/
- const u8 HEADER_END_OF_USB_PACKET[] =
+ const static u8 HEADER_END_OF_USB_PACKET[] =
{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
- const u8 EXPECTED_UNKNOWN_HEADER_1[] =
+ const static u8 EXPECTED_UNKNOWN_HEADER_1[] =
{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
- const u8 EXPECTED_UNKNOWN_HEADER_2[] =
+ const static u8 EXPECTED_UNKNOWN_HEADER_2[] =
{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
- u8 i = 0;
+ int i = 0;
/* incomplete header? */
if (skb->len < KALMIA_HEADER_LENGTH)
@@ -285,7 +293,7 @@ kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
/* subtract start header and end header */
usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
- ether_packet_length = header_start[2] + (header_start[3] << 8);
+ ether_packet_length = get_unaligned_le16(&header_start[2]);
skb_pull(skb, KALMIA_HEADER_LENGTH);
/* Some small packets misses end marker */
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index 241756e0e86f..1a2234c20514 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -331,17 +331,7 @@ static const struct usb_device_id products [] = {
ZAURUS_MASTER_INTERFACE,
.driver_info = ZAURUS_PXA_INFO,
},
-
-
-/* At least some of the newest PXA units have very different lies about
- * their standards support: they claim to be cell phones offering
- * direct access to their radios! (No, they don't conform to CDC MDLM.)
- */
{
- USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
- USB_CDC_PROTO_NONE),
- .driver_info = (unsigned long) &bogus_mdlm_info,
-}, {
/* Motorola MOTOMAGX phones */
USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 2c1473686abe..fabcded7c6a0 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -573,7 +573,7 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx];
u32 val;
- while (num_allocated < num_to_alloc) {
+ while (num_allocated <= num_to_alloc) {
struct vmxnet3_rx_buf_info *rbi;
union Vmxnet3_GenericDesc *gd;
@@ -619,9 +619,15 @@ vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
BUG_ON(rbi->dma_addr == 0);
gd->rxd.addr = cpu_to_le64(rbi->dma_addr);
- gd->dword[2] = cpu_to_le32((ring->gen << VMXNET3_RXD_GEN_SHIFT)
+ gd->dword[2] = cpu_to_le32((!ring->gen << VMXNET3_RXD_GEN_SHIFT)
| val | rbi->len);
+ /* Fill the last buffer but dont mark it ready, or else the
+ * device will think that the queue is full */
+ if (num_allocated == num_to_alloc)
+ break;
+
+ gd->dword[2] |= cpu_to_le32(ring->gen << VMXNET3_RXD_GEN_SHIFT);
num_allocated++;
vmxnet3_cmd_ring_adv_next2fill(ring);
}
@@ -1138,6 +1144,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2
};
u32 num_rxd = 0;
+ bool skip_page_frags = false;
struct Vmxnet3_RxCompDesc *rcd;
struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx;
#ifdef __BIG_ENDIAN_BITFIELD
@@ -1148,11 +1155,12 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
&rxComp);
while (rcd->gen == rq->comp_ring.gen) {
struct vmxnet3_rx_buf_info *rbi;
- struct sk_buff *skb;
+ struct sk_buff *skb, *new_skb = NULL;
+ struct page *new_page = NULL;
int num_to_alloc;
struct Vmxnet3_RxDesc *rxd;
u32 idx, ring_idx;
-
+ struct vmxnet3_cmd_ring *ring = NULL;
if (num_rxd >= quota) {
/* we may stop even before we see the EOP desc of
* the current pkt
@@ -1163,6 +1171,7 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2);
idx = rcd->rxdIdx;
ring_idx = rcd->rqID < adapter->num_rx_queues ? 0 : 1;
+ ring = rq->rx_ring + ring_idx;
vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd,
&rxCmdDesc);
rbi = rq->buf_info[ring_idx] + idx;
@@ -1191,37 +1200,80 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
goto rcd_done;
}
+ skip_page_frags = false;
ctx->skb = rbi->skb;
- rbi->skb = NULL;
+ new_skb = dev_alloc_skb(rbi->len + NET_IP_ALIGN);
+ if (new_skb == NULL) {
+ /* Skb allocation failed, do not handover this
+ * skb to stack. Reuse it. Drop the existing pkt
+ */
+ rq->stats.rx_buf_alloc_failure++;
+ ctx->skb = NULL;
+ rq->stats.drop_total++;
+ skip_page_frags = true;
+ goto rcd_done;
+ }
pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len,
PCI_DMA_FROMDEVICE);
skb_put(ctx->skb, rcd->len);
+
+ /* Immediate refill */
+ new_skb->dev = adapter->netdev;
+ skb_reserve(new_skb, NET_IP_ALIGN);
+ rbi->skb = new_skb;
+ rbi->dma_addr = pci_map_single(adapter->pdev,
+ rbi->skb->data, rbi->len,
+ PCI_DMA_FROMDEVICE);
+ rxd->addr = cpu_to_le64(rbi->dma_addr);
+ rxd->len = rbi->len;
+
} else {
- BUG_ON(ctx->skb == NULL);
+ BUG_ON(ctx->skb == NULL && !skip_page_frags);
+
/* non SOP buffer must be type 1 in most cases */
- if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) {
- BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
+ BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE);
+ BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
- if (rcd->len) {
- pci_unmap_page(adapter->pdev,
- rbi->dma_addr, rbi->len,
- PCI_DMA_FROMDEVICE);
+ /* If an sop buffer was dropped, skip all
+ * following non-sop fragments. They will be reused.
+ */
+ if (skip_page_frags)
+ goto rcd_done;
- vmxnet3_append_frag(ctx->skb, rcd, rbi);
- rbi->page = NULL;
- }
- } else {
- /*
- * The only time a non-SOP buffer is type 0 is
- * when it's EOP and error flag is raised, which
- * has already been handled.
+ new_page = alloc_page(GFP_ATOMIC);
+ if (unlikely(new_page == NULL)) {
+ /* Replacement page frag could not be allocated.
+ * Reuse this page. Drop the pkt and free the
+ * skb which contained this page as a frag. Skip
+ * processing all the following non-sop frags.
*/
- BUG_ON(true);
+ rq->stats.rx_buf_alloc_failure++;
+ dev_kfree_skb(ctx->skb);
+ ctx->skb = NULL;
+ skip_page_frags = true;
+ goto rcd_done;
+ }
+
+ if (rcd->len) {
+ pci_unmap_page(adapter->pdev,
+ rbi->dma_addr, rbi->len,
+ PCI_DMA_FROMDEVICE);
+
+ vmxnet3_append_frag(ctx->skb, rcd, rbi);
}
+
+ /* Immediate refill */
+ rbi->page = new_page;
+ rbi->dma_addr = pci_map_page(adapter->pdev, rbi->page,
+ 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ rxd->addr = cpu_to_le64(rbi->dma_addr);
+ rxd->len = rbi->len;
}
+
skb = ctx->skb;
if (rcd->eop) {
skb->len += skb->data_len;
@@ -1243,26 +1295,27 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
}
rcd_done:
- /* device may skip some rx descs */
- rq->rx_ring[ring_idx].next2comp = idx;
- VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp,
- rq->rx_ring[ring_idx].size);
-
- /* refill rx buffers frequently to avoid starving the h/w */
- num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring +
- ring_idx);
- if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq,
- ring_idx, adapter))) {
- vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc,
- adapter);
-
- /* if needed, update the register */
- if (unlikely(rq->shared->updateRxProd)) {
- VMXNET3_WRITE_BAR0_REG(adapter,
- rxprod_reg[ring_idx] + rq->qid * 8,
- rq->rx_ring[ring_idx].next2fill);
- rq->uncommitted[ring_idx] = 0;
- }
+ /* device may have skipped some rx descs */
+ ring->next2comp = idx;
+ num_to_alloc = vmxnet3_cmd_ring_desc_avail(ring);
+ ring = rq->rx_ring + ring_idx;
+ while (num_to_alloc) {
+ vmxnet3_getRxDesc(rxd, &ring->base[ring->next2fill].rxd,
+ &rxCmdDesc);
+ BUG_ON(!rxd->addr);
+
+ /* Recv desc is ready to be used by the device */
+ rxd->gen = ring->gen;
+ vmxnet3_cmd_ring_adv_next2fill(ring);
+ num_to_alloc--;
+ }
+
+ /* if needed, update the register */
+ if (unlikely(rq->shared->updateRxProd)) {
+ VMXNET3_WRITE_BAR0_REG(adapter,
+ rxprod_reg[ring_idx] + rq->qid * 8,
+ ring->next2fill);
+ rq->uncommitted[ring_idx] = 0;
}
vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring);
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index 2e37985809d2..a9cb3fabb17f 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -69,10 +69,10 @@
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.1.9.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.1.14.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01010900
+#define VMXNET3_DRIVER_VERSION_NUM 0x01010E00
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 1fef84f87c78..392771f93759 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -691,14 +691,12 @@ ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
if (!chinfo[pier].pd_curves)
continue;
- for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) {
+ for (pdg = 0; pdg < AR5K_EEPROM_N_PD_CURVES; pdg++) {
struct ath5k_pdgain_info *pd =
&chinfo[pier].pd_curves[pdg];
- if (pd != NULL) {
- kfree(pd->pd_step);
- kfree(pd->pd_pwr);
- }
+ kfree(pd->pd_step);
+ kfree(pd->pd_pwr);
}
kfree(chinfo[pier].pd_curves);
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index b8cbfc707213..3bad0b2cf9a3 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -278,6 +278,12 @@ static int ath_pci_suspend(struct device *device)
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
+ /* The device has to be moved to FULLSLEEP forcibly.
+ * Otherwise the chip never moved to full sleep,
+ * when no interface is up.
+ */
+ ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+
return 0;
}
OpenPOWER on IntegriCloud