summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/wireless/ath9k/ath9k.h4
-rw-r--r--drivers/net/wireless/ath9k/core.h33
-rw-r--r--drivers/net/wireless/ath9k/hw.c19
-rw-r--r--drivers/net/wireless/ath9k/main.c1
4 files changed, 55 insertions, 2 deletions
diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h
index d27813502953..6650f609ece4 100644
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -587,8 +587,8 @@ struct ath9k_country_entry {
u8 iso[3];
};
-#define REG_WRITE(_ah, _reg, _val) iowrite32(_val, _ah->ah_sh + _reg)
-#define REG_READ(_ah, _reg) ioread32(_ah->ah_sh + _reg)
+#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
+#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
#define SM(_v, _f) (((_v) << _f##_S) & _f)
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 4ca2aed236e0..139566cbbf65 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -701,6 +701,7 @@ struct ath_softc {
struct ath_hal *sc_ah;
void __iomem *mem;
spinlock_t sc_resetlock;
+ spinlock_t sc_serial_rw;
struct mutex mutex;
u8 sc_curbssid[ETH_ALEN];
@@ -751,4 +752,36 @@ int ath_get_hal_qnum(u16 queue, struct ath_softc *sc);
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
int ath_cabq_update(struct ath_softc *);
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+static inline void ath9k_iowrite32(struct ath_hal *ah, u32 reg_offset, u32 val)
+{
+ if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+static inline unsigned int ath9k_ioread32(struct ath_hal *ah, u32 reg_offset)
+{
+ u32 val;
+ if (ah->ah_config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ return val;
+}
+
#endif /* CORE_H */
diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index 34474edefc97..5c870436fc5f 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -437,6 +437,25 @@ static void ath9k_hw_set_defaults(struct ath_hal *ah)
}
ah->ah_config.intr_mitigation = 1;
+
+ /*
+ * We need this for PCI devices only (Cardbus, PCI, miniPCI)
+ * _and_ if on non-uniprocessor systems (Multiprocessor/HT).
+ * This means we use it for all AR5416 devices, and the few
+ * minor PCI AR9280 devices out there.
+ *
+ * Serialization is required because these devices do not handle
+ * well the case of two concurrent reads/writes due to the latency
+ * involved. During one read/write another read/write can be issued
+ * on another CPU while the previous read/write may still be working
+ * on our hardware, if we hit this case the hardware poops in a loop.
+ * We prevent this by serializing reads and writes.
+ *
+ * This issue is not present on PCI-Express devices or pre-AR5416
+ * devices (legacy, 802.11abg).
+ */
+ if (num_possible_cpus() > 1)
+ ah->ah_config.serialize_regmode = SER_REG_MODE_AUTO;
}
static struct ath_hal_5416 *ath9k_hw_newstate(u16 devid,
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 0e80990d8e84..3c04044a60bd 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1336,6 +1336,7 @@ static int ath_init(u16 devid, struct ath_softc *sc)
printk(KERN_ERR "Unable to create debugfs files\n");
spin_lock_init(&sc->sc_resetlock);
+ spin_lock_init(&sc->sc_serial_rw);
mutex_init(&sc->mutex);
tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc);
tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet,
OpenPOWER on IntegriCloud