summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rt2x00/rt2500usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2500usb.c')
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c307
1 files changed, 134 insertions, 173 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index d90512f97b39..3558cb210747 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -76,10 +76,10 @@ static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
void *value, const u16 length)
{
- int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
USB_VENDOR_REQUEST_IN, offset,
- value, length, timeout);
+ value, length,
+ REGISTER_TIMEOUT16(length));
}
static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev,
@@ -106,10 +106,10 @@ static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
const unsigned int offset,
void *value, const u16 length)
{
- int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
USB_VENDOR_REQUEST_OUT, offset,
- value, length, timeout);
+ value, length,
+ REGISTER_TIMEOUT16(length));
}
static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev)
@@ -322,6 +322,17 @@ static int rt2500usb_blink_set(struct led_classdev *led_cdev,
return 0;
}
+
+static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
+ struct rt2x00_led *led,
+ enum led_type type)
+{
+ led->rt2x00dev = rt2x00dev;
+ led->type = type;
+ led->led_dev.brightness_set = rt2500usb_brightness_set;
+ led->led_dev.blink_set = rt2500usb_blink_set;
+ led->flags = LED_INITIALIZED;
+}
#endif /* CONFIG_RT2500USB_LEDS */
/*
@@ -860,25 +871,32 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
return 0;
}
-static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
- u16 eeprom;
u8 value;
- u8 reg_id;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2500usb_bbp_read(rt2x00dev, 0, &value);
if ((value != 0xff) && (value != 0x00))
- goto continue_csr_init;
- NOTICE(rt2x00dev, "Waiting for BBP register.\n");
+ return 0;
udelay(REGISTER_BUSY_DELAY);
}
ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
return -EACCES;
+}
+
+static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u16 eeprom;
+ u8 value;
+ u8 reg_id;
+
+ if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev)))
+ return -EACCES;
-continue_csr_init:
rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
@@ -934,7 +952,8 @@ static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
- state == STATE_RADIO_RX_OFF);
+ (state == STATE_RADIO_RX_OFF) ||
+ (state == STATE_RADIO_RX_OFF_LINK));
rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
}
@@ -943,11 +962,9 @@ static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Initialize all registers.
*/
- if (rt2500usb_init_registers(rt2x00dev) ||
- rt2500usb_init_bbp(rt2x00dev)) {
- ERROR(rt2x00dev, "Register initialization failed.\n");
+ if (unlikely(rt2500usb_init_registers(rt2x00dev) ||
+ rt2500usb_init_bbp(rt2x00dev)))
return -EIO;
- }
return 0;
}
@@ -1000,10 +1017,6 @@ static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
msleep(30);
}
- NOTICE(rt2x00dev, "Device failed to enter state %d, "
- "current device state: bbp %d and rf %d.\n",
- state, bbp_state, rf_state);
-
return -EBUSY;
}
@@ -1021,11 +1034,13 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
break;
case STATE_RADIO_RX_ON:
case STATE_RADIO_RX_ON_LINK:
- rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
- break;
case STATE_RADIO_RX_OFF:
case STATE_RADIO_RX_OFF_LINK:
- rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+ rt2500usb_toggle_rx(rt2x00dev, state);
+ break;
+ case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_OFF:
+ /* No support, but no error either */
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
@@ -1038,6 +1053,10 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
break;
}
+ if (unlikely(retval))
+ ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+ state, retval);
+
return retval;
}
@@ -1046,8 +1065,7 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
*/
static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb,
- struct txentry_desc *txdesc,
- struct ieee80211_tx_control *control)
+ struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
__le32 *txd = skbdesc->desc;
@@ -1071,7 +1089,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 0, &word);
- rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit);
+ rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_ACK,
@@ -1081,13 +1099,73 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field32(&word, TXD_W0_OFDM,
test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
- !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT));
+ test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT,
+ skb->len - skbdesc->desc_len);
rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
}
+/*
+ * TX data initialization
+ */
+static void rt2500usb_beacondone(struct urb *urb);
+
+static void rt2500usb_write_beacon(struct queue_entry *entry)
+{
+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+ struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ int pipe = usb_sndbulkpipe(usb_dev, 1);
+ int length;
+ u16 reg;
+
+ /*
+ * Add the descriptor in front of the skb.
+ */
+ skb_push(entry->skb, entry->queue->desc_size);
+ memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len);
+ skbdesc->desc = entry->skb->data;
+
+ /*
+ * Disable beaconing while we are reloading the beacon data,
+ * otherwise we might be sending out invalid data.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
+ rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+
+ /*
+ * USB devices cannot blindly pass the skb->len as the
+ * length of the data to usb_fill_bulk_urb. Pass the skb
+ * to the driver to determine what the length should be.
+ */
+ length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb);
+
+ usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe,
+ entry->skb->data, length, rt2500usb_beacondone,
+ entry);
+
+ /*
+ * Second we need to create the guardian byte.
+ * We only need a single byte, so lets recycle
+ * the 'flags' field we are not using for beacons.
+ */
+ bcn_priv->guardian_data = 0;
+ usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe,
+ &bcn_priv->guardian_data, 1, rt2500usb_beacondone,
+ entry);
+
+ /*
+ * Send out the guardian byte.
+ */
+ usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC);
+}
+
static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
struct sk_buff *skb)
{
@@ -1103,16 +1181,15 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
return length;
}
-/*
- * TX data initialization
- */
static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
- const unsigned int queue)
+ const enum data_queue_qid queue)
{
u16 reg;
- if (queue != RT2X00_BCN_QUEUE_BEACON)
+ if (queue != QID_BEACON) {
+ rt2x00usb_kick_tx_queue(rt2x00dev, queue);
return;
+ }
rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
@@ -1138,30 +1215,28 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
static void rt2500usb_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
- struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data;
+ struct queue_entry_priv_usb *entry_priv = entry->priv_data;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
__le32 *rxd =
(__le32 *)(entry->skb->data +
- (priv_rx->urb->actual_length - entry->queue->desc_size));
- unsigned int offset = entry->queue->desc_size + 2;
+ (entry_priv->urb->actual_length -
+ entry->queue->desc_size));
u32 word0;
u32 word1;
/*
- * Copy descriptor to the available headroom inside the skbuffer.
+ * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
+ * frame data in rt2x00usb.
*/
- skb_push(entry->skb, offset);
- memcpy(entry->skb->data, rxd, entry->queue->desc_size);
- rxd = (__le32 *)entry->skb->data;
+ memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
+ rxd = (__le32 *)skbdesc->desc;
/*
- * The descriptor is now aligned to 4 bytes and thus it is
- * now safe to read it on all architectures.
+ * It is now safe to read the descriptor on all architectures.
*/
rt2x00_desc_read(rxd, 0, &word0);
rt2x00_desc_read(rxd, 1, &word1);
- rxdesc->flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
@@ -1178,7 +1253,6 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
entry->queue->rt2x00dev->rssi_offset;
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
- rxdesc->dev_flags = 0;
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
@@ -1187,16 +1261,7 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
/*
* Adjust the skb memory window to the frame boundaries.
*/
- skb_pull(entry->skb, offset);
skb_trim(entry->skb, rxdesc->size);
-
- /*
- * Set descriptor and data pointer.
- */
- skbdesc->data = entry->skb->data;
- skbdesc->data_len = rxdesc->size;
- skbdesc->desc = rxd;
- skbdesc->desc_len = entry->queue->desc_size;
}
/*
@@ -1205,7 +1270,7 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
static void rt2500usb_beacondone(struct urb *urb)
{
struct queue_entry *entry = (struct queue_entry *)urb->context;
- struct queue_entry_priv_usb_bcn *priv_bcn = entry->priv_data;
+ struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags))
return;
@@ -1216,9 +1281,9 @@ static void rt2500usb_beacondone(struct urb *urb)
* Otherwise we should free the sk_buffer, the device
* should be doing the rest of the work now.
*/
- if (priv_bcn->guardian_urb == urb) {
- usb_submit_urb(priv_bcn->urb, GFP_ATOMIC);
- } else if (priv_bcn->urb == urb) {
+ if (bcn_priv->guardian_urb == urb) {
+ usb_submit_urb(bcn_priv->urb, GFP_ATOMIC);
+ } else if (bcn_priv->urb == urb) {
dev_kfree_skb(entry->skb);
entry->skb = NULL;
}
@@ -1397,23 +1462,10 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
#ifdef CONFIG_RT2500USB_LEDS
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
- rt2x00dev->led_radio.rt2x00dev = rt2x00dev;
- rt2x00dev->led_radio.type = LED_TYPE_RADIO;
- rt2x00dev->led_radio.led_dev.brightness_set =
- rt2500usb_brightness_set;
- rt2x00dev->led_radio.led_dev.blink_set =
- rt2500usb_blink_set;
- rt2x00dev->led_radio.flags = LED_INITIALIZED;
-
- if (value == LED_MODE_TXRX_ACTIVITY) {
- rt2x00dev->led_qual.rt2x00dev = rt2x00dev;
- rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY;
- rt2x00dev->led_qual.led_dev.brightness_set =
- rt2500usb_brightness_set;
- rt2x00dev->led_qual.led_dev.blink_set =
- rt2500usb_blink_set;
- rt2x00dev->led_qual.flags = LED_INITIALIZED;
- }
+ rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+ if (value == LED_MODE_TXRX_ACTIVITY)
+ rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
+ LED_TYPE_ACTIVITY);
#endif /* CONFIG_RT2500USB_LEDS */
/*
@@ -1600,13 +1652,12 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00dev->hw->flags =
IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM;
+
rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
- rt2x00dev->hw->max_signal = MAX_SIGNAL;
- rt2x00dev->hw->max_rssi = MAX_RX_SSI;
- rt2x00dev->hw->queues = 2;
- SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
+ SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
@@ -1684,97 +1735,6 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
return 0;
}
-/*
- * IEEE80211 stack callback functions.
- */
-static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
- struct sk_buff *skb,
- struct ieee80211_tx_control *control)
-{
- struct rt2x00_dev *rt2x00dev = hw->priv;
- struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev);
- struct rt2x00_intf *intf = vif_to_intf(control->vif);
- struct queue_entry_priv_usb_bcn *priv_bcn;
- struct skb_frame_desc *skbdesc;
- int pipe = usb_sndbulkpipe(usb_dev, 1);
- int length;
- u16 reg;
-
- if (unlikely(!intf->beacon))
- return -ENOBUFS;
-
- priv_bcn = intf->beacon->priv_data;
-
- /*
- * Add the descriptor in front of the skb.
- */
- skb_push(skb, intf->beacon->queue->desc_size);
- memset(skb->data, 0, intf->beacon->queue->desc_size);
-
- /*
- * Fill in skb descriptor
- */
- skbdesc = get_skb_frame_desc(skb);
- memset(skbdesc, 0, sizeof(*skbdesc));
- skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
- skbdesc->data = skb->data + intf->beacon->queue->desc_size;
- skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
- skbdesc->desc = skb->data;
- skbdesc->desc_len = intf->beacon->queue->desc_size;
- skbdesc->entry = intf->beacon;
-
- /*
- * Disable beaconing while we are reloading the beacon data,
- * otherwise we might be sending out invalid data.
- */
- rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
- rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
- rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
- rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
-
- /*
- * mac80211 doesn't provide the control->queue variable
- * for beacons. Set our own queue identification so
- * it can be used during descriptor initialization.
- */
- control->queue = RT2X00_BCN_QUEUE_BEACON;
- rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
-
- /*
- * USB devices cannot blindly pass the skb->len as the
- * length of the data to usb_fill_bulk_urb. Pass the skb
- * to the driver to determine what the length should be.
- */
- length = rt2500usb_get_tx_data_len(rt2x00dev, skb);
-
- usb_fill_bulk_urb(priv_bcn->urb, usb_dev, pipe,
- skb->data, length, rt2500usb_beacondone,
- intf->beacon);
-
- /*
- * Second we need to create the guardian byte.
- * We only need a single byte, so lets recycle
- * the 'flags' field we are not using for beacons.
- */
- priv_bcn->guardian_data = 0;
- usb_fill_bulk_urb(priv_bcn->guardian_urb, usb_dev, pipe,
- &priv_bcn->guardian_data, 1, rt2500usb_beacondone,
- intf->beacon);
-
- /*
- * Send out the guardian byte.
- */
- usb_submit_urb(priv_bcn->guardian_urb, GFP_ATOMIC);
-
- /*
- * Enable beacon generation.
- */
- rt2500usb_kick_tx_queue(rt2x00dev, control->queue);
-
- return 0;
-}
-
static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.tx = rt2x00mac_tx,
.start = rt2x00mac_start,
@@ -1788,7 +1748,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tx_stats = rt2x00mac_get_tx_stats,
- .beacon_update = rt2500usb_beacon_update,
};
static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
@@ -1803,6 +1762,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
.link_tuner = rt2500usb_link_tuner,
.write_tx_desc = rt2500usb_write_tx_desc,
.write_tx_data = rt2x00usb_write_tx_data,
+ .write_beacon = rt2500usb_write_beacon,
.get_tx_data_len = rt2500usb_get_tx_data_len,
.kick_tx_queue = rt2500usb_kick_tx_queue,
.fill_rxdone = rt2500usb_fill_rxdone,
@@ -1816,14 +1776,14 @@ static const struct data_queue_desc rt2500usb_queue_rx = {
.entry_num = RX_ENTRIES,
.data_size = DATA_FRAME_SIZE,
.desc_size = RXD_DESC_SIZE,
- .priv_size = sizeof(struct queue_entry_priv_usb_rx),
+ .priv_size = sizeof(struct queue_entry_priv_usb),
};
static const struct data_queue_desc rt2500usb_queue_tx = {
.entry_num = TX_ENTRIES,
.data_size = DATA_FRAME_SIZE,
.desc_size = TXD_DESC_SIZE,
- .priv_size = sizeof(struct queue_entry_priv_usb_tx),
+ .priv_size = sizeof(struct queue_entry_priv_usb),
};
static const struct data_queue_desc rt2500usb_queue_bcn = {
@@ -1837,7 +1797,7 @@ static const struct data_queue_desc rt2500usb_queue_atim = {
.entry_num = ATIM_ENTRIES,
.data_size = DATA_FRAME_SIZE,
.desc_size = TXD_DESC_SIZE,
- .priv_size = sizeof(struct queue_entry_priv_usb_tx),
+ .priv_size = sizeof(struct queue_entry_priv_usb),
};
static const struct rt2x00_ops rt2500usb_ops = {
@@ -1846,6 +1806,7 @@ static const struct rt2x00_ops rt2500usb_ops = {
.max_ap_intf = 1,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
.rx = &rt2500usb_queue_rx,
.tx = &rt2500usb_queue_tx,
.bcn = &rt2500usb_queue_bcn,
OpenPOWER on IntegriCloud