diff options
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-trans.h')
| -rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-trans.h | 72 |
1 files changed, 51 insertions, 21 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index a96bd8db6ceb..56254a837214 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -77,10 +77,10 @@ /** * DOC: Transport layer - what is it ? * - * The tranport layer is the layer that deals with the HW directly. It provides + * The transport layer is the layer that deals with the HW directly. It provides * an abstraction of the underlying HW to the upper layer. The transport layer * doesn't provide any policy, algorithm or anything of this kind, but only - * mechanisms to make the HW do something.It is not completely stateless but + * mechanisms to make the HW do something. It is not completely stateless but * close to it. * We will have an implementation for each different supported bus. */ @@ -111,10 +111,10 @@ /** * DOC: Host command section * - * A host command is a commaned issued by the upper layer to the fw. There are + * A host command is a command issued by the upper layer to the fw. There are * several versions of fw that have several APIs. The transport layer is * completely agnostic to these differences. - * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode), + * The transport does provide helper functionality (i.e. SYNC / ASYNC mode), */ #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) @@ -195,7 +195,7 @@ static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt) * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of * the response. The caller needs to call iwl_free_resp when done. * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the - * command queue, but after other high priority commands. valid only + * command queue, but after other high priority commands. Valid only * with CMD_ASYNC. * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle. * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle. @@ -421,8 +421,9 @@ struct iwl_trans_txq_scd_cfg { * * All the handlers MUST be implemented * - * @start_hw: starts the HW- from that point on, the HW can send interrupts - * May sleep + * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken + * out of a low power state. From that point on, the HW can send + * interrupts. May sleep. * @op_mode_leave: Turn off the HW RF kill indication if on * May sleep * @start_fw: allocates and inits all the resources for the transport @@ -432,10 +433,11 @@ struct iwl_trans_txq_scd_cfg { * the SCD base address in SRAM, then provide it here, or 0 otherwise. * May sleep * @stop_device: stops the whole device (embedded CPU put to reset) and stops - * the HW. From that point on, the HW will be in low power but will still - * issue interrupt if the HW RF kill is triggered. This callback must do - * the right thing and not crash even if start_hw() was called but not - * start_fw(). May sleep + * the HW. If low_power is true, the NIC will be put in low power state. + * From that point on, the HW will be stopped but will still issue an + * interrupt if the HW RF kill switch is triggered. + * This callback must do the right thing and not crash even if %start_hw() + * was called but not &start_fw(). May sleep. * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. @@ -458,6 +460,8 @@ struct iwl_trans_txq_scd_cfg { * @txq_disable: de-configure a Tx queue to send AMPDUs * Must be atomic * @wait_tx_queue_empty: wait until tx queues are empty. May sleep. + * @freeze_txq_timer: prevents the timer of the queue from firing until the + * queue is set to awake. Must be atomic. * @dbgfs_register: add the dbgfs files under this directory. Files will be * automatically deleted. * @write8: write a u8 to a register at offset ofs from the BAR @@ -489,14 +493,14 @@ struct iwl_trans_txq_scd_cfg { */ struct iwl_trans_ops { - int (*start_hw)(struct iwl_trans *iwl_trans); + int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power); void (*op_mode_leave)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill); int (*update_sf)(struct iwl_trans *trans, struct iwl_sf_region *st_fwrd_space); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); - void (*stop_device)(struct iwl_trans *trans); + void (*stop_device)(struct iwl_trans *trans, bool low_power); void (*d3_suspend)(struct iwl_trans *trans, bool test); int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, @@ -517,6 +521,8 @@ struct iwl_trans_ops { int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir); int (*wait_tx_queue_empty)(struct iwl_trans *trans, u32 txq_bm); + void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs, + bool freeze); void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val); void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val); @@ -578,7 +584,7 @@ enum iwl_d0i3_mode { * @cfg - pointer to the configuration * @status: a bit-mask of transport status flags * @dev - pointer to struct device * that represents the device - * @hw_id: a u32 with the ID of the device / subdevice. + * @hw_id: a u32 with the ID of the device / sub-device. * Set during transport allocation. * @hw_id_str: a string with info about HW ID. Set during transport allocation. * @pm_support: set to true in start_hw if link pm is supported @@ -595,6 +601,7 @@ enum iwl_d0i3_mode { * @dflt_pwr_limit: default power limit fetched from the platform (ACPI) * @dbg_dest_tlv: points to the destination TLV for debug * @dbg_conf_tlv: array of pointers to configuration TLVs for debug + * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv */ struct iwl_trans { @@ -628,7 +635,8 @@ struct iwl_trans { u64 dflt_pwr_limit; const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv; - const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_MAX]; + const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX]; + struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv; u8 dbg_dest_reg_num; enum iwl_d0i3_mode d0i3_mode; @@ -646,11 +654,16 @@ static inline void iwl_trans_configure(struct iwl_trans *trans, trans->ops->configure(trans, trans_cfg); } -static inline int iwl_trans_start_hw(struct iwl_trans *trans) +static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power) { might_sleep(); - return trans->ops->start_hw(trans); + return trans->ops->start_hw(trans, low_power); +} + +static inline int iwl_trans_start_hw(struct iwl_trans *trans) +{ + return trans->ops->start_hw(trans, true); } static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) @@ -697,15 +710,21 @@ static inline int iwl_trans_update_sf(struct iwl_trans *trans, return 0; } -static inline void iwl_trans_stop_device(struct iwl_trans *trans) +static inline void _iwl_trans_stop_device(struct iwl_trans *trans, + bool low_power) { might_sleep(); - trans->ops->stop_device(trans); + trans->ops->stop_device(trans, low_power); trans->state = IWL_TRANS_NO_FW; } +static inline void iwl_trans_stop_device(struct iwl_trans *trans) +{ + _iwl_trans_stop_device(trans, true); +} + static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test) { might_sleep(); @@ -871,6 +890,17 @@ void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo, iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout); } +static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans, + unsigned long txqs, + bool freeze) +{ + if (unlikely(trans->state != IWL_TRANS_FW_ALIVE)) + IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); + + if (trans->ops->freeze_txq_timer) + trans->ops->freeze_txq_timer(trans, txqs, freeze); +} + static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans, u32 txqs) { |
