diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw/api/mac.h')
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/api/mac.h | 172 |
1 files changed, 172 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h index f2e31e040a7b..55594c93b014 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h @@ -7,6 +7,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2017 Intel Deutschland GmbH + * Copyright(c) 2018 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -28,6 +29,7 @@ * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2017 Intel Deutschland GmbH + * Copyright(c) 2018 Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -279,6 +281,10 @@ enum iwl_mac_filter_flags { MAC_FILTER_OUT_BCAST = BIT(8), MAC_FILTER_IN_CRC32 = BIT(11), MAC_FILTER_IN_PROBE_REQUEST = BIT(12), + /** + * @MAC_FILTER_IN_11AX: mark BSS as supporting 802.11ax + */ + MAC_FILTER_IN_11AX = BIT(14), }; /** @@ -406,4 +412,170 @@ struct iwl_missed_beacons_notif { __le32 num_recvd_beacons; } __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */ +/** + * struct iwl_he_backoff_conf - used for backoff configuration + * Per each trigger-based AC, (set by MU EDCA Parameter set info-element) + * used for backoff configuration of TXF5..TXF8 trigger based. + * The MU-TIMER is reloaded w/ MU_TIME each time a frame from the AC is sent via + * trigger-based TX. + * @cwmin: CW min + * @cwmax: CW max + * @aifsn: AIFSN + * AIFSN=0, means that no backoff from the specified TRIG-BASED AC is + * allowed till the MU-TIMER is 0 + * @mu_time: MU time in 8TU units + */ +struct iwl_he_backoff_conf { + __le16 cwmin; + __le16 cwmax; + __le16 aifsn; + __le16 mu_time; +} __packed; /* AC_QOS_DOT11AX_API_S */ + +#define MAX_HE_SUPP_NSS 2 +#define MAX_HE_CHANNEL_BW_INDX 4 + +/** + * struct iwl_he_pkt_ext - QAM thresholds + * The required PPE is set via HE Capabilities IE, per Nss x BW x MCS + * The IE is organized in the following way: + * Support for Nss x BW (or RU) matrix: + * (0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz) + * Each entry contains 2 QAM thresholds for 8us and 16us: + * 0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6/7=RES + * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx: + * QAM_tx < QAM_th1 --> PPE=0us + * QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us + * QAM_th2 <= QAM_tx --> PPE=16us + * @pkt_ext_qam_th: QAM thresholds + * For each Nss/Bw define 2 QAM thrsholds (0..5) + * For rates below the low_th, no need for PPE + * For rates between low_th and high_th, need 8us PPE + * For rates equal or higher then the high_th, need 16us PPE + * Nss (0-siso, 1-mimo2) x BW (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz) x + * (0-low_th, 1-high_th) + */ +struct iwl_he_pkt_ext { + u8 pkt_ext_qam_th[MAX_HE_SUPP_NSS][MAX_HE_CHANNEL_BW_INDX][2]; +} __packed; /* PKT_EXT_DOT11AX_API_S */ + +/** + * enum iwl_he_sta_ctxt_flags - HE STA context flags + * @STA_CTXT_HE_REF_BSSID_VALID: ref bssid addr valid (for receiving specific + * control frames such as TRIG, NDPA, BACK) + * @STA_CTXT_HE_BSS_COLOR_DIS: BSS color disable, don't use the BSS + * color for RX filter but use MAC header + * @STA_CTXT_HE_PARTIAL_BSS_COLOR: partial BSS color allocation + * @STA_CTXT_HE_32BIT_BA_BITMAP: indicates the receiver supports BA bitmap + * of 32-bits + * @STA_CTXT_HE_PACKET_EXT: indicates that the packet-extension info is valid + * and should be used + * @STA_CTXT_HE_TRIG_RND_ALLOC: indicates that trigger based random allocation + * is enabled according to UORA element existence + * @STA_CTXT_HE_CONST_TRIG_RND_ALLOC: used for AV testing + * @STA_CTXT_HE_ACK_ENABLED: indicates that the AP supports receiving ACK- + * enabled AGG, i.e. both BACK and non-BACK frames in a single AGG + * @STA_CTXT_HE_MU_EDCA_CW: indicates that there is an element of MU EDCA + * parameter set, i.e. the backoff counters for trig-based ACs + */ +enum iwl_he_sta_ctxt_flags { + STA_CTXT_HE_REF_BSSID_VALID = BIT(4), + STA_CTXT_HE_BSS_COLOR_DIS = BIT(5), + STA_CTXT_HE_PARTIAL_BSS_COLOR = BIT(6), + STA_CTXT_HE_32BIT_BA_BITMAP = BIT(7), + STA_CTXT_HE_PACKET_EXT = BIT(8), + STA_CTXT_HE_TRIG_RND_ALLOC = BIT(9), + STA_CTXT_HE_CONST_TRIG_RND_ALLOC = BIT(10), + STA_CTXT_HE_ACK_ENABLED = BIT(11), + STA_CTXT_HE_MU_EDCA_CW = BIT(12), +}; + +/** + * enum iwl_he_htc_flags - HE HTC support flags + * @IWL_HE_HTC_SUPPORT: HE-HTC support + * @IWL_HE_HTC_UL_MU_RESP_SCHED: HE UL MU response schedule + * support via A-control field + * @IWL_HE_HTC_BSR_SUPP: BSR support in A-control field + * @IWL_HE_HTC_OMI_SUPP: A-OMI support in A-control field + * @IWL_HE_HTC_BQR_SUPP: A-BQR support in A-control field + */ +enum iwl_he_htc_flags { + IWL_HE_HTC_SUPPORT = BIT(0), + IWL_HE_HTC_UL_MU_RESP_SCHED = BIT(3), + IWL_HE_HTC_BSR_SUPP = BIT(4), + IWL_HE_HTC_OMI_SUPP = BIT(5), + IWL_HE_HTC_BQR_SUPP = BIT(6), +}; + +/* + * @IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK: the STA does not provide HE MFB + * @IWL_HE_HTC_LINK_ADAP_UNSOLICITED: the STA provides only unsolicited HE MFB + * @IWL_HE_HTC_LINK_ADAP_BOTH: the STA is capable of providing HE MFB in + * response to HE MRQ and if the STA provides unsolicited HE MFB + */ +#define IWL_HE_HTC_LINK_ADAP_POS (1) +#define IWL_HE_HTC_LINK_ADAP_NO_FEEDBACK (0) +#define IWL_HE_HTC_LINK_ADAP_UNSOLICITED (2 << IWL_HE_HTC_LINK_ADAP_POS) +#define IWL_HE_HTC_LINK_ADAP_BOTH (3 << IWL_HE_HTC_LINK_ADAP_POS) + +/** + * struct iwl_he_sta_context_cmd - configure FW to work with HE AP + * @sta_id: STA id + * @tid_limit: max num of TIDs in TX HE-SU multi-TID agg + * 0 - bad value, 1 - multi-tid not supported, 2..8 - tid limit + * @reserved1: reserved byte for future use + * @reserved2: reserved byte for future use + * @flags: see %iwl_11ax_sta_ctxt_flags + * @ref_bssid_addr: reference BSSID used by the AP + * @reserved0: reserved 2 bytes for aligning the ref_bssid_addr field to 8 bytes + * @htc_flags: which features are supported in HTC + * @frag_flags: frag support in A-MSDU + * @frag_level: frag support level + * @frag_max_num: max num of "open" MSDUs in the receiver (in power of 2) + * @frag_min_size: min frag size (except last frag) + * @pkt_ext: optional, exists according to PPE-present bit in the HE-PHY capa + * @bss_color: 11ax AP ID that is used in the HE SIG-A to mark inter BSS frame + * @htc_trig_based_pkt_ext: default PE in 4us units + * @frame_time_rts_th: HE duration RTS threshold, in units of 32us + * @rand_alloc_ecwmin: random CWmin = 2**ECWmin-1 + * @rand_alloc_ecwmax: random CWmax = 2**ECWmax-1 + * @reserved3: reserved byte for future use + * @trig_based_txf: MU EDCA Parameter set for the trigger based traffic queues + */ +struct iwl_he_sta_context_cmd { + u8 sta_id; + u8 tid_limit; + u8 reserved1; + u8 reserved2; + __le32 flags; + + /* The below fields are set via Multiple BSSID IE */ + u8 ref_bssid_addr[6]; + __le16 reserved0; + + /* The below fields are set via HE-capabilities IE */ + __le32 htc_flags; + + u8 frag_flags; + u8 frag_level; + u8 frag_max_num; + u8 frag_min_size; + + /* The below fields are set via PPE thresholds element */ + struct iwl_he_pkt_ext pkt_ext; + + /* The below fields are set via HE-Operation IE */ + u8 bss_color; + u8 htc_trig_based_pkt_ext; + __le16 frame_time_rts_th; + + /* Random access parameter set (i.e. RAPS) */ + u8 rand_alloc_ecwmin; + u8 rand_alloc_ecwmax; + __le16 reserved3; + + /* The below fields are set via MU EDCA parameter set element */ + struct iwl_he_backoff_conf trig_based_txf[AC_NUM]; +} __packed; /* STA_CONTEXT_DOT11AX_API_S */ + #endif /* __iwl_fw_api_mac_h__ */ |