summaryrefslogtreecommitdiffstats
path: root/drivers/net/tg3.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tg3.h')
-rw-r--r--drivers/net/tg3.h32
1 files changed, 26 insertions, 6 deletions
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 8de6f21037ba..99c5f9675a56 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -876,10 +876,12 @@
#define HOSTCC_STATUS_ERROR_ATTN 0x00000004
#define HOSTCC_RXCOL_TICKS 0x00003c08
#define LOW_RXCOL_TICKS 0x00000032
+#define LOW_RXCOL_TICKS_CLRTCKS 0x00000014
#define DEFAULT_RXCOL_TICKS 0x00000048
#define HIGH_RXCOL_TICKS 0x00000096
#define HOSTCC_TXCOL_TICKS 0x00003c0c
#define LOW_TXCOL_TICKS 0x00000096
+#define LOW_TXCOL_TICKS_CLRTCKS 0x00000048
#define DEFAULT_TXCOL_TICKS 0x0000012c
#define HIGH_TXCOL_TICKS 0x00000145
#define HOSTCC_RXMAX_FRAMES 0x00003c10
@@ -892,8 +894,10 @@
#define HIGH_TXMAX_FRAMES 0x00000052
#define HOSTCC_RXCOAL_TICK_INT 0x00003c18
#define DEFAULT_RXCOAL_TICK_INT 0x00000019
+#define DEFAULT_RXCOAL_TICK_INT_CLRTCKS 0x00000014
#define HOSTCC_TXCOAL_TICK_INT 0x00003c1c
#define DEFAULT_TXCOAL_TICK_INT 0x00000019
+#define DEFAULT_TXCOAL_TICK_INT_CLRTCKS 0x00000014
#define HOSTCC_RXCOAL_MAXF_INT 0x00003c20
#define DEFAULT_RXCOAL_MAXF_INT 0x00000005
#define HOSTCC_TXCOAL_MAXF_INT 0x00003c24
@@ -2002,17 +2006,31 @@ struct tg3_ethtool_stats {
struct tg3 {
/* begin "general, frequently-used members" cacheline section */
+ /* If the IRQ handler (which runs lockless) needs to be
+ * quiesced, the following bitmask state is used. The
+ * SYNC flag is set by non-IRQ context code to initiate
+ * the quiescence.
+ *
+ * When the IRQ handler notices that SYNC is set, it
+ * disables interrupts and returns.
+ *
+ * When all outstanding IRQ handlers have returned after
+ * the SYNC flag has been set, the setter can be assured
+ * that interrupts will no longer get run.
+ *
+ * In this way all SMP driver locks are never acquired
+ * in hw IRQ context, only sw IRQ context or lower.
+ */
+ unsigned int irq_sync;
+
/* SMP locking strategy:
*
* lock: Held during all operations except TX packet
* processing.
*
- * tx_lock: Held during tg3_start_xmit{,_4gbug} and tg3_tx
+ * tx_lock: Held during tg3_start_xmit and tg3_tx
*
- * If you want to shut up all asynchronous processing you must
- * acquire both locks, 'lock' taken before 'tx_lock'. IRQs must
- * be disabled to take 'lock' but only softirq disabling is
- * necessary for acquisition of 'tx_lock'.
+ * Both of these locks are to be held with BH safety.
*/
spinlock_t lock;
spinlock_t indirect_lock;
@@ -2023,6 +2041,7 @@ struct tg3 {
struct tg3_hw_status *hw_status;
dma_addr_t status_mapping;
+ u32 last_tag;
u32 msg_enable;
@@ -2068,6 +2087,7 @@ struct tg3 {
u32 rx_offset;
u32 tg3_flags;
+#define TG3_FLAG_TAGGED_STATUS 0x00000001
#define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002
#define TG3_FLAG_RX_CHECKSUMS 0x00000004
#define TG3_FLAG_USE_LINKCHG_REG 0x00000008
@@ -2225,7 +2245,7 @@ struct tg3 {
#define SST_25VF0X0_PAGE_SIZE 4098
-
+ struct ethtool_coalesce coal;
};
#endif /* !(_T3_H) */
OpenPOWER on IntegriCloud