diff options
Diffstat (limited to 'drivers/net/sfc/tenxpress.c')
| -rw-r--r-- | drivers/net/sfc/tenxpress.c | 140 |
1 files changed, 79 insertions, 61 deletions
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index ca11572a49a9..10db071bd837 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -202,10 +202,14 @@ static ssize_t set_phy_short_reach(struct device *dev, int rc; rtnl_lock(); - efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, - MDIO_PMA_10GBT_TXPWR_SHORT, - count != 0 && *buf != '0'); - rc = efx_reconfigure_port(efx); + if (efx->state != STATE_RUNNING) { + rc = -EBUSY; + } else { + efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR, + MDIO_PMA_10GBT_TXPWR_SHORT, + count != 0 && *buf != '0'); + rc = efx_reconfigure_port(efx); + } rtnl_unlock(); return rc < 0 ? rc : (ssize_t)count; @@ -298,36 +302,62 @@ static int tenxpress_init(struct efx_nic *efx) return 0; } -static int sfx7101_phy_probe(struct efx_nic *efx) +static int tenxpress_phy_probe(struct efx_nic *efx) { - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; - return 0; -} + struct tenxpress_phy_data *phy_data; + int rc; + + /* Allocate phy private storage */ + phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; + efx->phy_data = phy_data; + phy_data->phy_mode = efx->phy_mode; + + /* Create any special files */ + if (efx->phy_type == PHY_TYPE_SFT9001B) { + rc = device_create_file(&efx->pci_dev->dev, + &dev_attr_phy_short_reach); + if (rc) + goto fail; + } + + if (efx->phy_type == PHY_TYPE_SFX7101) { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45; + + efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS; + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full); + } else { + efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; + efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + + efx->loopback_modes = (SFT9001_LOOPBACKS | + FALCON_XMAC_LOOPBACKS | + FALCON_GMAC_LOOPBACKS); + + efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | + ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_100baseT_Full); + } -static int sft9001_phy_probe(struct efx_nic *efx) -{ - efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS; - efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; - efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS | - FALCON_GMAC_LOOPBACKS); return 0; + +fail: + kfree(efx->phy_data); + efx->phy_data = NULL; + return rc; } static int tenxpress_phy_init(struct efx_nic *efx) { - struct tenxpress_phy_data *phy_data; - int rc = 0; + int rc; falcon_board(efx)->type->init_phy(efx); - phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); - if (!phy_data) - return -ENOMEM; - efx->phy_data = phy_data; - phy_data->phy_mode = efx->phy_mode; - if (!(efx->phy_mode & PHY_MODE_SPECIAL)) { if (efx->phy_type == PHY_TYPE_SFT9001A) { int reg; @@ -341,44 +371,27 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto fail; + return rc; rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0); if (rc < 0) - goto fail; + return rc; } rc = tenxpress_init(efx); if (rc < 0) - goto fail; + return rc; - /* Initialise advertising flags */ - efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg | - ADVERTISED_10000baseT_Full); - if (efx->phy_type != PHY_TYPE_SFX7101) - efx->link_advertising |= (ADVERTISED_1000baseT_Full | - ADVERTISED_100baseT_Full); + /* Reinitialise flow control settings */ efx_link_set_wanted_fc(efx, efx->wanted_fc); efx_mdio_an_reconfigure(efx); - if (efx->phy_type == PHY_TYPE_SFT9001B) { - rc = device_create_file(&efx->pci_dev->dev, - &dev_attr_phy_short_reach); - if (rc) - goto fail; - } - schedule_timeout_uninterruptible(HZ / 5); /* 200ms */ /* Let XGXS and SerDes out of reset */ falcon_reset_xaui(efx); return 0; - - fail: - kfree(efx->phy_data); - efx->phy_data = NULL; - return rc; } /* Perform a "special software reset" on the PHY. The caller is @@ -589,25 +602,26 @@ static bool tenxpress_phy_poll(struct efx_nic *efx) return !efx_link_state_equal(&efx->link_state, &old_state); } -static void tenxpress_phy_fini(struct efx_nic *efx) +static void sfx7101_phy_fini(struct efx_nic *efx) { int reg; + /* Power down the LNPGA */ + reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); + efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); + + /* Waiting here ensures that the board fini, which can turn + * off the power to the PHY, won't get run until the LNPGA + * powerdown has been given long enough to complete. */ + schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ +} + +static void tenxpress_phy_remove(struct efx_nic *efx) +{ if (efx->phy_type == PHY_TYPE_SFT9001B) device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_short_reach); - if (efx->phy_type == PHY_TYPE_SFX7101) { - /* Power down the LNPGA */ - reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN); - efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); - - /* Waiting here ensures that the board fini, which can turn - * off the power to the PHY, won't get run until the LNPGA - * powerdown has been given long enough to complete. */ - schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */ - } - kfree(efx->phy_data); efx->phy_data = NULL; } @@ -819,27 +833,31 @@ static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) } struct efx_phy_operations falcon_sfx7101_phy_ops = { - .probe = sfx7101_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = sfx7101_phy_fini, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sfx7101_set_npage_adv, + .test_alive = efx_mdio_test_alive, .test_name = sfx7101_test_name, .run_tests = sfx7101_run_tests, }; struct efx_phy_operations falcon_sft9001_phy_ops = { - .probe = sft9001_phy_probe, + .probe = tenxpress_phy_probe, .init = tenxpress_phy_init, .reconfigure = tenxpress_phy_reconfigure, .poll = tenxpress_phy_poll, - .fini = tenxpress_phy_fini, + .fini = efx_port_dummy_op_void, + .remove = tenxpress_phy_remove, .get_settings = tenxpress_get_settings, .set_settings = tenxpress_set_settings, .set_npage_adv = sft9001_set_npage_adv, + .test_alive = efx_mdio_test_alive, .test_name = sft9001_test_name, .run_tests = sft9001_run_tests, }; |
