diff options
Diffstat (limited to 'drivers/net/s2io.c')
| -rw-r--r-- | drivers/net/s2io.c | 3085 |
1 files changed, 1895 insertions, 1190 deletions
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ea638b162d3f..7ca78228b104 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -11,29 +11,28 @@ * See the file COPYING in this distribution for more information. * * Credits: - * Jeff Garzik : For pointing out the improper error condition - * check in the s2io_xmit routine and also some - * issues in the Tx watch dog function. Also for - * patiently answering all those innumerable + * Jeff Garzik : For pointing out the improper error condition + * check in the s2io_xmit routine and also some + * issues in the Tx watch dog function. Also for + * patiently answering all those innumerable * questions regaring the 2.6 porting issues. * Stephen Hemminger : Providing proper 2.6 porting mechanism for some * macros available only in 2.6 Kernel. - * Francois Romieu : For pointing out all code part that were + * Francois Romieu : For pointing out all code part that were * deprecated and also styling related comments. - * Grant Grundler : For helping me get rid of some Architecture + * Grant Grundler : For helping me get rid of some Architecture * dependent code. * Christopher Hellwig : Some more 2.6 specific issues in the driver. - * + * * The module loadable parameters that are supported by the driver and a brief * explaination of all the variables. - * rx_ring_num : This can be used to program the number of receive rings used - * in the driver. - * rx_ring_len: This defines the number of descriptors each ring can have. This + * rx_ring_num : This can be used to program the number of receive rings used + * in the driver. + * rx_ring_len: This defines the number of descriptors each ring can have. This * is also an array of size 8. * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver. - * tx_fifo_len: This too is an array of 8. Each element defines the number of + * tx_fifo_len: This too is an array of 8. Each element defines the number of * Tx descriptors that can be associated with each corresponding FIFO. - * in PCI Configuration space. ************************************************************************/ #include <linux/config.h> @@ -56,27 +55,39 @@ #include <linux/ethtool.h> #include <linux/version.h> #include <linux/workqueue.h> +#include <linux/if_vlan.h> -#include <asm/io.h> #include <asm/system.h> #include <asm/uaccess.h> +#include <asm/io.h> /* local include */ #include "s2io.h" #include "s2io-regs.h" /* S2io Driver name & version. */ -static char s2io_driver_name[] = "s2io"; -static char s2io_driver_version[] = "Version 1.7.7.1"; +static char s2io_driver_name[] = "Neterion"; +static char s2io_driver_version[] = "Version 2.0.3.1"; + +static inline int RXD_IS_UP2DT(RxD_t *rxdp) +{ + int ret; + + ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) && + (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK)); -/* + return ret; +} + +/* * Cards with following subsystem_id have a link state indication * problem, 600B, 600C, 600D, 640B, 640C and 640D. * macro below identifies these cards given the subsystem_id. */ -#define CARDS_WITH_FAULTY_LINK_INDICATORS(subid) \ - (((subid >= 0x600B) && (subid <= 0x600D)) || \ - ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0 +#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \ + (dev_type == XFRAME_I_DEVICE) ? \ + ((((subid >= 0x600B) && (subid <= 0x600D)) || \ + ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \ ADAPTER_STATUS_RMAC_LOCAL_FAULT))) @@ -86,9 +97,12 @@ static char s2io_driver_version[] = "Version 1.7.7.1"; static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring) { int level = 0; - if ((sp->pkt_cnt[ring] - rxb_size) > 16) { + mac_info_t *mac_control; + + mac_control = &sp->mac_control; + if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) { level = LOW; - if ((sp->pkt_cnt[ring] - rxb_size) < MAX_RXDS_PER_BLOCK) { + if (rxb_size <= MAX_RXDS_PER_BLOCK) { level = PANIC; } } @@ -145,6 +159,9 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = { {"rmac_pause_cnt"}, {"rmac_accepted_ip"}, {"rmac_err_tcp"}, + {"\n DRIVER STATISTICS"}, + {"single_bit_ecc_errs"}, + {"double_bit_ecc_errs"}, }; #define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN @@ -153,8 +170,37 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = { #define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN #define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN +#define S2IO_TIMER_CONF(timer, handle, arg, exp) \ + init_timer(&timer); \ + timer.function = handle; \ + timer.data = (unsigned long) arg; \ + mod_timer(&timer, (jiffies + exp)) \ + +/* Add the vlan */ +static void s2io_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + nic_t *nic = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&nic->tx_lock, flags); + nic->vlgrp = grp; + spin_unlock_irqrestore(&nic->tx_lock, flags); +} + +/* Unregister the vlan */ +static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid) +{ + nic_t *nic = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&nic->tx_lock, flags); + if (nic->vlgrp) + nic->vlgrp->vlan_devices[vid] = NULL; + spin_unlock_irqrestore(&nic->tx_lock, flags); +} -/* +/* * Constants to be programmed into the Xena's registers, to configure * the XAUI. */ @@ -162,7 +208,28 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = { #define SWITCH_SIGN 0xA5A5A5A5A5A5A5A5ULL #define END_SIGN 0x0 -static u64 default_mdio_cfg[] = { +static u64 herc_act_dtx_cfg[] = { + /* Set address */ + 0x8000051536750000ULL, 0x80000515367500E0ULL, + /* Write data */ + 0x8000051536750004ULL, 0x80000515367500E4ULL, + /* Set address */ + 0x80010515003F0000ULL, 0x80010515003F00E0ULL, + /* Write data */ + 0x80010515003F0004ULL, 0x80010515003F00E4ULL, + /* Set address */ + 0x801205150D440000ULL, 0x801205150D4400E0ULL, + /* Write data */ + 0x801205150D440004ULL, 0x801205150D4400E4ULL, + /* Set address */ + 0x80020515F2100000ULL, 0x80020515F21000E0ULL, + /* Write data */ + 0x80020515F2100004ULL, 0x80020515F21000E4ULL, + /* Done */ + END_SIGN +}; + +static u64 xena_mdio_cfg[] = { /* Reset PMA PLL */ 0xC001010000000000ULL, 0xC0010100000000E0ULL, 0xC0010100008000E4ULL, @@ -172,7 +239,7 @@ static u64 default_mdio_cfg[] = { END_SIGN }; -static u64 default_dtx_cfg[] = { +static u64 xena_dtx_cfg[] = { 0x8000051500000000ULL, 0x80000515000000E0ULL, 0x80000515D93500E4ULL, 0x8001051500000000ULL, 0x80010515000000E0ULL, 0x80010515001E00E4ULL, @@ -196,8 +263,7 @@ static u64 default_dtx_cfg[] = { END_SIGN }; - -/* +/* * Constants for Fixing the MacAddress problem seen mostly on * Alpha machines. */ @@ -226,20 +292,25 @@ static unsigned int tx_fifo_len[MAX_TX_FIFOS] = static unsigned int rx_ring_num = 1; static unsigned int rx_ring_sz[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; -static unsigned int Stats_refresh_time = 4; +static unsigned int rts_frm_len[MAX_RX_RINGS] = + {[0 ...(MAX_RX_RINGS - 1)] = 0 }; +static unsigned int use_continuous_tx_intrs = 1; static unsigned int rmac_pause_time = 65535; static unsigned int mc_pause_threshold_q0q3 = 187; static unsigned int mc_pause_threshold_q4q7 = 187; static unsigned int shared_splits; static unsigned int tmac_util_period = 5; static unsigned int rmac_util_period = 5; +static unsigned int bimodal = 0; #ifndef CONFIG_S2IO_NAPI static unsigned int indicate_max_pkts; #endif +/* Frequency of Rx desc syncs expressed as power of 2 */ +static unsigned int rxsync_frequency = 3; -/* +/* * S2IO device table. - * This table lists all the devices that this driver supports. + * This table lists all the devices that this driver supports. */ static struct pci_device_id s2io_tbl[] __devinitdata = { {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN, @@ -247,9 +318,9 @@ static struct pci_device_id s2io_tbl[] __devinitdata = { {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI, PCI_ANY_ID, PCI_ANY_ID}, {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN, - PCI_ANY_ID, PCI_ANY_ID}, - {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI, - PCI_ANY_ID, PCI_ANY_ID}, + PCI_ANY_ID, PCI_ANY_ID}, + {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI, + PCI_ANY_ID, PCI_ANY_ID}, {0,} }; @@ -268,8 +339,8 @@ static struct pci_driver s2io_driver = { /** * init_shared_mem - Allocation and Initialization of Memory * @nic: Device private variable. - * Description: The function allocates all the memory areas shared - * between the NIC and the driver. This includes Tx descriptors, + * Description: The function allocates all the memory areas shared + * between the NIC and the driver. This includes Tx descriptors, * Rx descriptors and the statistics block. */ @@ -279,11 +350,11 @@ static int init_shared_mem(struct s2io_nic *nic) void *tmp_v_addr, *tmp_v_addr_next; dma_addr_t tmp_p_addr, tmp_p_addr_next; RxD_block_t *pre_rxd_blk = NULL; - int i, j, blk_cnt; + int i, j, blk_cnt, rx_sz, tx_sz; int lst_size, lst_per_page; struct net_device *dev = nic->dev; #ifdef CONFIG_2BUFF_MODE - unsigned long tmp; + u64 tmp; buffAdd_t *ba; #endif @@ -300,36 +371,41 @@ static int init_shared_mem(struct s2io_nic *nic) size += config->tx_cfg[i].fifo_len; } if (size > MAX_AVAILABLE_TXDS) { - DBG_PRINT(ERR_DBG, "%s: Total number of Tx FIFOs ", - dev->name); - DBG_PRINT(ERR_DBG, "exceeds the maximum value "); - DBG_PRINT(ERR_DBG, "that can be used\n"); + DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ", + __FUNCTION__); + DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size); return FAILURE; } lst_size = (sizeof(TxD_t) * config->max_txds); + tx_sz = lst_size * size; lst_per_page = PAGE_SIZE / lst_size; for (i = 0; i < config->tx_fifo_num; i++) { int fifo_len = config->tx_cfg[i].fifo_len; int list_holder_size = fifo_len * sizeof(list_info_hold_t); - nic->list_info[i] = kmalloc(list_holder_size, GFP_KERNEL); - if (!nic->list_info[i]) { + mac_control->fifos[i].list_info = kmalloc(list_holder_size, + GFP_KERNEL); + if (!mac_control->fifos[i].list_info) { DBG_PRINT(ERR_DBG, "Malloc failed for list_info\n"); return -ENOMEM; } - memset(nic->list_info[i], 0, list_holder_size); + memset(mac_control->fifos[i].list_info, 0, list_holder_size); } for (i = 0; i < config->tx_fifo_num; i++) { int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len, lst_per_page); - mac_control->tx_curr_put_info[i].offset = 0; - mac_control->tx_curr_put_info[i].fifo_len = + mac_control->fifos[i].tx_curr_put_info.offset = 0; + mac_control->fifos[i].tx_curr_put_info.fifo_len = config->tx_cfg[i].fifo_len - 1; - mac_control->tx_curr_get_info[i].offset = 0; - mac_control->tx_curr_get_info[i].fifo_len = + mac_control->fifos[i].tx_curr_get_info.offset = 0; + mac_control->fifos[i].tx_curr_get_info.fifo_len = config->tx_cfg[i].fifo_len - 1; + mac_control->fifos[i].fifo_no = i; + mac_control->fifos[i].nic = nic; + mac_control->fifos[i].max_txds = MAX_SKB_FRAGS; + for (j = 0; j < page_num; j++) { int k = 0; dma_addr_t tmp_p; @@ -345,16 +421,15 @@ static int init_shared_mem(struct s2io_nic *nic) while (k < lst_per_page) { int l = (j * lst_per_page) + k; if (l == config->tx_cfg[i].fifo_len) - goto end_txd_alloc; - nic->list_info[i][l].list_virt_addr = + break; + mac_control->fifos[i].list_info[l].list_virt_addr = tmp_v + (k * lst_size); - nic->list_info[i][l].list_phy_addr = + mac_control->fifos[i].list_info[l].list_phy_addr = tmp_p + (k * lst_size); k++; } } } - end_txd_alloc: /* Allocation and initialization of RXDs in Rings */ size = 0; @@ -367,21 +442,26 @@ static int init_shared_mem(struct s2io_nic *nic) return FAILURE; } size += config->rx_cfg[i].num_rxd; - nic->block_count[i] = + mac_control->rings[i].block_count = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - nic->pkt_cnt[i] = - config->rx_cfg[i].num_rxd - nic->block_count[i]; + mac_control->rings[i].pkt_cnt = + config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count; } + size = (size * (sizeof(RxD_t))); + rx_sz = size; for (i = 0; i < config->rx_ring_num; i++) { - mac_control->rx_curr_get_info[i].block_index = 0; - mac_control->rx_curr_get_info[i].offset = 0; - mac_control->rx_curr_get_info[i].ring_len = + mac_control->rings[i].rx_curr_get_info.block_index = 0; + mac_control->rings[i].rx_curr_get_info.offset = 0; + mac_control->rings[i].rx_curr_get_info.ring_len = config->rx_cfg[i].num_rxd - 1; - mac_control->rx_curr_put_info[i].block_index = 0; - mac_control->rx_curr_put_info[i].offset = 0; - mac_control->rx_curr_put_info[i].ring_len = + mac_control->rings[i].rx_curr_put_info.block_index = 0; + mac_control->rings[i].rx_curr_put_info.offset = 0; + mac_control->rings[i].rx_curr_put_info.ring_len = config->rx_cfg[i].num_rxd - 1; + mac_control->rings[i].nic = nic; + mac_control->rings[i].ring_no = i; + blk_cnt = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); /* Allocating all the Rx blocks */ @@ -395,32 +475,36 @@ static int init_shared_mem(struct s2io_nic *nic) &tmp_p_addr); if (tmp_v_addr == NULL) { /* - * In case of failure, free_shared_mem() - * is called, which should free any - * memory that was alloced till the + * In case of failure, free_shared_mem() + * is called, which should free any + * memory that was alloced till the * failure happened. */ - nic->rx_blocks[i][j].block_virt_addr = + mac_control->rings[i].rx_blocks[j].block_virt_addr = tmp_v_addr; return -ENOMEM; } memset(tmp_v_addr, 0, size); - nic->rx_blocks[i][j].block_virt_addr = tmp_v_addr; - nic->rx_blocks[i][j].block_dma_addr = tmp_p_addr; + mac_control->rings[i].rx_blocks[j].block_virt_addr = + tmp_v_addr; + mac_control->rings[i].rx_blocks[j].block_dma_addr = + tmp_p_addr; } /* Interlinking all Rx Blocks */ for (j = 0; j < blk_cnt; j++) { - tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr; + tmp_v_addr = + mac_control->rings[i].rx_blocks[j].block_virt_addr; tmp_v_addr_next = - nic->rx_blocks[i][(j + 1) % + mac_control->rings[i].rx_blocks[(j + 1) % blk_cnt].block_virt_addr; - tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr; + tmp_p_addr = + mac_control->rings[i].rx_blocks[j].block_dma_addr; tmp_p_addr_next = - nic->rx_blocks[i][(j + 1) % + mac_control->rings[i].rx_blocks[(j + 1) % blk_cnt].block_dma_addr; pre_rxd_blk = (RxD_block_t *) tmp_v_addr; - pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD + pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD * marker. */ #ifndef CONFIG_2BUFF_MODE @@ -433,43 +517,43 @@ static int init_shared_mem(struct s2io_nic *nic) } #ifdef CONFIG_2BUFF_MODE - /* + /* * Allocation of Storages for buffer addresses in 2BUFF mode * and the buffers as well. */ for (i = 0; i < config->rx_ring_num; i++) { blk_cnt = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - nic->ba[i] = kmalloc((sizeof(buffAdd_t *) * blk_cnt), + mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt), GFP_KERNEL); - if (!nic->ba[i]) + if (!mac_control->rings[i].ba) return -ENOMEM; for (j = 0; j < blk_cnt; j++) { int k = 0; - nic->ba[i][j] = kmalloc((sizeof(buffAdd_t) * + mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) * (MAX_RXDS_PER_BLOCK + 1)), GFP_KERNEL); - if (!nic->ba[i][j]) + if (!mac_control->rings[i].ba[j]) return -ENOMEM; while (k != MAX_RXDS_PER_BLOCK) { - ba = &nic->ba[i][j][k]; + ba = &mac_control->rings[i].ba[j][k]; - ba->ba_0_org = kmalloc + ba->ba_0_org = (void *) kmalloc (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL); if (!ba->ba_0_org) return -ENOMEM; - tmp = (unsigned long) ba->ba_0_org; + tmp = (u64) ba->ba_0_org; tmp += ALIGN_SIZE; - tmp &= ~((unsigned long) ALIGN_SIZE); + tmp &= ~((u64) ALIGN_SIZE); ba->ba_0 = (void *) tmp; - ba->ba_1_org = kmalloc + ba->ba_1_org = (void *) kmalloc (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL); if (!ba->ba_1_org) return -ENOMEM; - tmp = (unsigned long) ba->ba_1_org; + tmp = (u64) ba->ba_1_org; tmp += ALIGN_SIZE; - tmp &= ~((unsigned long) ALIGN_SIZE); + tmp &= ~((u64) ALIGN_SIZE); ba->ba_1 = (void *) tmp; k++; } @@ -483,9 +567,9 @@ static int init_shared_mem(struct s2io_nic *nic) (nic->pdev, size, &mac_control->stats_mem_phy); if (!mac_control->stats_mem) { - /* - * In case of failure, free_shared_mem() is called, which - * should free any memory that was alloced till the + /* + * In case of failure, free_shared_mem() is called, which + * should free any memory that was alloced till the * failure happened. */ return -ENOMEM; @@ -495,15 +579,14 @@ static int init_shared_mem(struct s2io_nic *nic) tmp_v_addr = mac_control->stats_mem; mac_control->stats_info = (StatInfo_t *) tmp_v_addr; memset(tmp_v_addr, 0, size); - DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name, (unsigned long long) tmp_p_addr); return SUCCESS; } -/** - * free_shared_mem - Free the allocated Memory +/** + * free_shared_mem - Free the allocated Memory * @nic: Device private variable. * Description: This function is to free all memory locations allocated by * the init_shared_mem() function and return it to the kernel. @@ -533,15 +616,19 @@ static void free_shared_mem(struct s2io_nic *nic) lst_per_page); for (j = 0; j < page_num; j++) { int mem_blks = (j * lst_per_page); - if (!nic->list_info[i][mem_blks].list_virt_addr) + if ((!mac_control->fifos[i].list_info) || + (!mac_control->fifos[i].list_info[mem_blks]. + list_virt_addr)) break; pci_free_consistent(nic->pdev, PAGE_SIZE, - nic->list_info[i][mem_blks]. + mac_control->fifos[i]. + list_info[mem_blks]. list_virt_addr, - nic->list_info[i][mem_blks]. + mac_control->fifos[i]. + list_info[mem_blks]. list_phy_addr); } - kfree(nic->list_info[i]); + kfree(mac_control->fifos[i].list_info); } #ifndef CONFIG_2BUFF_MODE @@ -550,10 +637,12 @@ static void free_shared_mem(struct s2io_nic *nic) size = SIZE_OF_BLOCK; #endif for (i = 0; i < config->rx_ring_num; i++) { - blk_cnt = nic->block_count[i]; + blk_cnt = mac_control->rings[i].block_count; for (j = 0; j < blk_cnt; j++) { - tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr; - tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr; + tmp_v_addr = mac_control->rings[i].rx_blocks[j]. + block_virt_addr; + tmp_p_addr = mac_control->rings[i].rx_blocks[j]. + block_dma_addr; if (tmp_v_addr == NULL) break; pci_free_consistent(nic->pdev, size, @@ -566,35 +655,21 @@ static void free_shared_mem(struct s2io_nic *nic) for (i = 0; i < config->rx_ring_num; i++) { blk_cnt = config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1); - if (!nic->ba[i]) - goto end_free; for (j = 0; j < blk_cnt; j++) { int k = 0; - if (!nic->ba[i][j]) { - kfree(nic->ba[i]); - goto end_free; - } + if (!mac_control->rings[i].ba[j]) + continue; while (k != MAX_RXDS_PER_BLOCK) { - buffAdd_t *ba = &nic->ba[i][j][k]; - if (!ba || !ba->ba_0_org || !ba->ba_1_org) - { - kfree(nic->ba[i]); - kfree(nic->ba[i][j]); - if(ba->ba_0_org) - kfree(ba->ba_0_org); - if(ba->ba_1_org) - kfree(ba->ba_1_org); - goto end_free; - } + buffAdd_t *ba = &mac_control->rings[i].ba[j][k]; kfree(ba->ba_0_org); kfree(ba->ba_1_org); k++; } - kfree(nic->ba[i][j]); + kfree(mac_control->rings[i].ba[j]); } - kfree(nic->ba[i]); + if (mac_control->rings[i].ba) + kfree(mac_control->rings[i].ba); } -end_free: #endif if (mac_control->stats_mem) { @@ -605,12 +680,93 @@ end_free: } } -/** - * init_nic - Initialization of hardware +/** + * s2io_verify_pci_mode - + */ + +static int s2io_verify_pci_mode(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + register u64 val64 = 0; + int mode; + + val64 = readq(&bar0->pci_mode); + mode = (u8)GET_PCI_MODE(val64); + + if ( val64 & PCI_MODE_UNKNOWN_MODE) + return -1; /* Unknown PCI mode */ + return mode; +} + + +/** + * s2io_print_pci_mode - + */ +static int s2io_print_pci_mode(nic_t *nic) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + register u64 val64 = 0; + int mode; + struct config_param *config = &nic->config; + + val64 = readq(&bar0->pci_mode); + mode = (u8)GET_PCI_MODE(val64); + + if ( val64 & PCI_MODE_UNKNOWN_MODE) + return -1; /* Unknown PCI mode */ + + if (val64 & PCI_MODE_32_BITS) { + DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name); + } else { + DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name); + } + + switch(mode) { + case PCI_MODE_PCI_33: + DBG_PRINT(ERR_DBG, "33MHz PCI bus\n"); + config->bus_speed = 33; + break; + case PCI_MODE_PCI_66: + DBG_PRINT(ERR_DBG, "66MHz PCI bus\n"); + config->bus_speed = 133; + break; + case PCI_MODE_PCIX_M1_66: + DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n"); + config->bus_speed = 133; /* Herc doubles the clock rate */ + break; + case PCI_MODE_PCIX_M1_100: + DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n"); + config->bus_speed = 200; + break; + case PCI_MODE_PCIX_M1_133: + DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n"); + config->bus_speed = 266; + break; + case PCI_MODE_PCIX_M2_66: + DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n"); + config->bus_speed = 133; + break; + case PCI_MODE_PCIX_M2_100: + DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n"); + config->bus_speed = 200; + break; + case PCI_MODE_PCIX_M2_133: + DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n"); + config->bus_speed = 266; + break; + default: + return -1; /* Unsupported bus speed */ + } + + return mode; +} + +/** + * init_nic - Initialization of hardware * @nic: device peivate variable - * Description: The function sequentially configures every block - * of the H/W from their reset values. - * Return Value: SUCCESS on success and + * Description: The function sequentially configures every block + * of the H/W from their reset values. + * Return Value: SUCCESS on success and * '-1' on failure (endian settings incorrect). */ @@ -626,21 +782,32 @@ static int init_nic(struct s2io_nic *nic) struct config_param *config; int mdio_cnt = 0, dtx_cnt = 0; unsigned long long mem_share; + int mem_size; mac_control = &nic->mac_control; config = &nic->config; - /* Initialize swapper control register */ - if (s2io_set_swapper(nic)) { + /* to set the swapper controle on the card */ + if(s2io_set_swapper(nic)) { DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n"); return -1; } + /* + * Herc requires EOI to be removed from reset before XGXS, so.. + */ + if (nic->device_type & XFRAME_II_DEVICE) { + val64 = 0xA500000000ULL; + writeq(val64, &bar0->sw_reset); + msleep(500); + val64 = readq(&bar0->sw_reset); + } + /* Remove XGXS from reset state */ val64 = 0; writeq(val64, &bar0->sw_reset); - val64 = readq(&bar0->sw_reset); msleep(500); + val64 = readq(&bar0->sw_reset); /* Enable Receiving broadcasts */ add = &bar0->mac_cfg; @@ -660,48 +827,58 @@ static int init_nic(struct s2io_nic *nic) val64 = dev->mtu; writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); - /* - * Configuring the XAUI Interface of Xena. + /* + * Configuring the XAUI Interface of Xena. * *************************************** - * To Configure the Xena's XAUI, one has to write a series - * of 64 bit values into two registers in a particular - * sequence. Hence a macro 'SWITCH_SIGN' has been defined - * which will be defined in the array of configuration values - * (default_dtx_cfg & default_mdio_cfg) at appropriate places - * to switch writing from one regsiter to another. We continue + * To Configure the Xena's XAUI, one has to write a series + * of 64 bit values into two registers in a particular + * sequence. Hence a macro 'SWITCH_SIGN' has been defined + * which will be defined in the array of configuration values + * (xena_dtx_cfg & xena_mdio_cfg) at appropriate places + * to switch writing from one regsiter to another. We continue * writing these values until we encounter the 'END_SIGN' macro. - * For example, After making a series of 21 writes into - * dtx_control register the 'SWITCH_SIGN' appears and hence we + * For example, After making a series of 21 writes into + * dtx_control register the 'SWITCH_SIGN' appears and hence we * start writing into mdio_control until we encounter END_SIGN. */ - while (1) { - dtx_cfg: - while (default_dtx_cfg[dtx_cnt] != END_SIGN) { - if (default_dtx_cfg[dtx_cnt] == SWITCH_SIGN) { - dtx_cnt++; - goto mdio_cfg; - } - SPECIAL_REG_WRITE(default_dtx_cfg[dtx_cnt], + if (nic->device_type & XFRAME_II_DEVICE) { + while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) { + SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt], &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); + if (dtx_cnt & 0x1) + msleep(1); /* Necessary!! */ dtx_cnt++; } - mdio_cfg: - while (default_mdio_cfg[mdio_cnt] != END_SIGN) { - if (default_mdio_cfg[mdio_cnt] == SWITCH_SIGN) { + } else { + while (1) { + dtx_cfg: + while (xena_dtx_cfg[dtx_cnt] != END_SIGN) { + if (xena_dtx_cfg[dtx_cnt] == SWITCH_SIGN) { + dtx_cnt++; + goto mdio_cfg; + } + SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt], + &bar0->dtx_control, UF); + val64 = readq(&bar0->dtx_control); + dtx_cnt++; + } + mdio_cfg: + while (xena_mdio_cfg[mdio_cnt] != END_SIGN) { + if (xena_mdio_cfg[mdio_cnt] == SWITCH_SIGN) { + mdio_cnt++; + goto dtx_cfg; + } + SPECIAL_REG_WRITE(xena_mdio_cfg[mdio_cnt], + &bar0->mdio_control, UF); + val64 = readq(&bar0->mdio_control); mdio_cnt++; + } + if ((xena_dtx_cfg[dtx_cnt] == END_SIGN) && + (xena_mdio_cfg[mdio_cnt] == END_SIGN)) { + break; + } else { goto dtx_cfg; } - SPECIAL_REG_WRITE(default_mdio_cfg[mdio_cnt], - &bar0->mdio_control, UF); - val64 = readq(&bar0->mdio_control); - mdio_cnt++; - } - if ((default_dtx_cfg[dtx_cnt] == END_SIGN) && - (default_mdio_cfg[mdio_cnt] == END_SIGN)) { - break; - } else { - goto dtx_cfg; } } @@ -748,12 +925,20 @@ static int init_nic(struct s2io_nic *nic) val64 |= BIT(0); /* To enable the FIFO partition. */ writeq(val64, &bar0->tx_fifo_partition_0); + /* + * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug + * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. + */ + if ((nic->device_type == XFRAME_I_DEVICE) && + (get_xena_rev_id(nic->pdev) < 4)) + writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable); + val64 = readq(&bar0->tx_fifo_partition_0); DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", &bar0->tx_fifo_partition_0, (unsigned long long) val64); - /* - * Initialization of Tx_PA_CONFIG register to ignore packet + /* + * Initialization of Tx_PA_CONFIG register to ignore packet * integrity checking. */ val64 = readq(&bar0->tx_pa_cfg); @@ -770,85 +955,304 @@ static int init_nic(struct s2io_nic *nic) } writeq(val64, &bar0->rx_queue_priority); - /* - * Allocating equal share of memory to all the + /* + * Allocating equal share of memory to all the * configured Rings. */ val64 = 0; + if (nic->device_type & XFRAME_II_DEVICE) + mem_size = 32; + else + mem_size = 64; + for (i = 0; i < config->rx_ring_num; i++) { switch (i) { case 0: - mem_share = (64 / config->rx_ring_num + - 64 % config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num + + mem_size % config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share); continue; case 1: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share); continue; case 2: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share); continue; case 3: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share); continue; case 4: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share); continue; case 5: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share); continue; case 6: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share); continue; case 7: - mem_share = (64 / config->rx_ring_num); + mem_share = (mem_size / config->rx_ring_num); val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share); continue; } } writeq(val64, &bar0->rx_queue_cfg); - /* - * Initializing the Tx round robin registers to 0. - * Filling Tx and Rx round robin registers as per the - * number of FIFOs and Rings is still TODO. - */ - writeq(0, &bar0->tx_w_round_robin_0); - writeq(0, &bar0->tx_w_round_robin_1); - writeq(0, &bar0->tx_w_round_robin_2); - writeq(0, &bar0->tx_w_round_robin_3); - writeq(0, &bar0->tx_w_round_robin_4); - - /* - * TODO - * Disable Rx steering. Hard coding all packets be steered to - * Queue 0 for now. + /* + * Filling Tx round robin registers + * as per the number of FIFOs */ - val64 = 0x8080808080808080ULL; - writeq(val64, &bar0->rts_qos_steering); + switch (config->tx_fifo_num) { + case 1: + val64 = 0x0000000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + writeq(val64, &bar0->tx_w_round_robin_1); + writeq(val64, &bar0->tx_w_round_robin_2); + writeq(val64, &bar0->tx_w_round_robin_3); + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 2: + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0100000100000100ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0001000001000001ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0100000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 3: + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0001020000010001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0200000100010200ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001020000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 4: + val64 = 0x0001020300010200ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0100000102030001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0200010000010203ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001020001000001ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0203000100000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 5: + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 6: + val64 = 0x0001020304000102ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0304050001020001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0203000100000102ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304000102030405ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001000200000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 7: + val64 = 0x0001020001020300ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0102030400010203ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0405060001020001ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304050000010200ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0102030000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 8: + val64 = 0x0001020300040105ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0200030106000204ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0103000502010007ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304010002060500ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0103020400000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + } + + /* Filling the Rx round robin registers as per the + * number of Rings and steering based on QoS. + */ + switch (config->rx_ring_num) { + case 1: + val64 = 0x8080808080808080ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 2: + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0100000100000100ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0001000001000001ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0100000000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080808040404040ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 3: + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0001020000010001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0200000100010200ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001020000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080804040402020ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 4: + val64 = 0x0001020300010200ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0100000102030001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0200010000010203ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001020001000001ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0203000100000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020201010ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 5: + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001000000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020201008ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 6: + val64 = 0x0001020304000102ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0304050001020001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0203000100000102ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304000102030405ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001000200000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020100804ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 7: + val64 = 0x0001020001020300ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0102030400010203ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0405060001020001ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304050000010200ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0102030000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080402010080402ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 8: + val64 = 0x0001020300040105ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0200030106000204ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0103000502010007ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304010002060500ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0103020400000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8040201008040201ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + } /* UDP Fix */ val64 = 0; - for (i = 1; i < 8; i++) + for (i = 0; i < 8; i++) + writeq(val64, &bar0->rts_frm_len_n[i]); + + /* Set the default rts frame length for the rings configured */ + val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22); + for (i = 0 ; i < config->rx_ring_num ; i++) writeq(val64, &bar0->rts_frm_len_n[i]); - /* Set rts_frm_len register for fifo 0 */ - writeq(MAC_RTS_FRM_LEN_SET(dev->mtu + 22), - &bar0->rts_frm_len_n[0]); + /* Set the frame length for the configured rings + * desired by the user + */ + for (i = 0; i < config->rx_ring_num; i++) { + /* If rts_frm_len[i] == 0 then it is assumed that user not + * specified frame length steering. + * If the user provides the frame length then program + * the rts_frm_len register for those values or else + * leave it as it is. + */ + if (rts_frm_len[i] != 0) { + writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]), + &bar0->rts_frm_len_n[i]); + } + } - /* Enable statistics */ + /* Program statistics memory */ writeq(mac_control->stats_mem_phy, &bar0->stat_addr); - val64 = SET_UPDT_PERIOD(Stats_refresh_time) | - STAT_CFG_STAT_RO | STAT_CFG_STAT_EN; - writeq(val64, &bar0->stat_cfg); - /* + if (nic->device_type == XFRAME_II_DEVICE) { + val64 = STAT_BC(0x320); + writeq(val64, &bar0->stat_byte_cnt); + } + + /* * Initializing the sampling rate for the device to calculate the * bandwidth utilization. */ @@ -857,30 +1261,38 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->mac_link_util); - /* - * Initializing the Transmit and Receive Traffic Interrupt + /* + * Initializing the Transmit and Receive Traffic Interrupt * Scheme. */ - /* TTI Initialization. Default Tx timer gets us about + /* + * TTI Initialization. Default Tx timer gets us about * 250 interrupts per sec. Continuous interrupts are enabled * by default. */ - val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) | - TTI_DATA1_MEM_TX_URNG_A(0xA) | + if (nic->device_type == XFRAME_II_DEVICE) { + int count = (nic->config.bus_speed * 125)/2; + val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count); + } else { + + val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078); + } + val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) | TTI_DATA1_MEM_TX_URNG_B(0x10) | - TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN | - TTI_DATA1_MEM_TX_TIMER_CI_EN; + TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN; + if (use_continuous_tx_intrs) + val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; writeq(val64, &bar0->tti_data1_mem); val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | TTI_DATA2_MEM_TX_UFC_B(0x20) | - TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80); + TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80); writeq(val64, &bar0->tti_data2_mem); val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD; writeq(val64, &bar0->tti_command_mem); - /* + /* * Once the operation completes, the Strobe bit of the command * register will be reset. We poll for this particular condition * We wait for a maximum of 500ms for the operation to complete, @@ -901,52 +1313,97 @@ static int init_nic(struct s2io_nic *nic) time++; } - /* RTI Initialization */ - val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF) | - RTI_DATA1_MEM_RX_URNG_A(0xA) | - RTI_DATA1_MEM_RX_URNG_B(0x10) | - RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN; + if (nic->config.bimodal) { + int k = 0; + for (k = 0; k < config->rx_ring_num; k++) { + val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD; + val64 |= TTI_CMD_MEM_OFFSET(0x38+k); + writeq(val64, &bar0->tti_command_mem); + + /* + * Once the operation completes, the Strobe bit of the command + * register will be reset. We poll for this particular condition + * We wait for a maximum of 500ms for the operation to complete, + * if it's not complete by then we return error. + */ + time = 0; + while (TRUE) { + val64 = readq(&bar0->tti_command_mem); + if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) { + break; + } + if (time > 10) { + DBG_PRINT(ERR_DBG, + "%s: TTI init Failed\n", + dev->name); + return -1; + } + time++; + msleep(50); + } + } + } else { - writeq(val64, &bar0->rti_data1_mem); + /* RTI Initialization */ + if (nic->device_type == XFRAME_II_DEVICE) { + /* + * Programmed to generate Apprx 500 Intrs per + * second + */ + int count = (nic->config.bus_speed * 125)/4; + val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count); + } else { + val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF); + } + val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) | + RTI_DATA1_MEM_RX_URNG_B(0x10) | + RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN; - val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | - RTI_DATA2_MEM_RX_UFC_B(0x2) | - RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80); - writeq(val64, &bar0->rti_data2_mem); + writeq(val64, &bar0->rti_data1_mem); - val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD; - writeq(val64, &bar0->rti_command_mem); + val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) | + RTI_DATA2_MEM_RX_UFC_B(0x2) | + RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80); + writeq(val64, &bar0->rti_data2_mem); - /* - * Once the operation completes, the Strobe bit of the command - * register will be reset. We poll for this particular condition - * We wait for a maximum of 500ms for the operation to complete, - * if it's not complete by then we return error. - */ - time = 0; - while (TRUE) { - val64 = readq(&bar0->rti_command_mem); - if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) { - break; - } - if (time > 10) { - DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n", - dev->name); - return -1; + for (i = 0; i < config->rx_ring_num; i++) { + val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD + | RTI_CMD_MEM_OFFSET(i); + writeq(val64, &bar0->rti_command_mem); + + /* + * Once the operation completes, the Strobe bit of the + * command register will be reset. We poll for this + * particular condition. We wait for a maximum of 500ms + * for the operation to complete, if it's not complete + * by then we return error. + */ + time = 0; + while (TRUE) { + val64 = readq(&bar0->rti_command_mem); + if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) { + break; + } + if (time > 10) { + DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n", + dev->name); + return -1; + } + time++; + msleep(50); + } } - time++; - msleep(50); } - /* - * Initializing proper values as Pause threshold into all + /* + * Initializing proper values as Pause threshold into all * the 8 Queues on Rx side. */ writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3); writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7); /* Disable RMAC PAD STRIPPING */ - add = &bar0->mac_cfg; + add = (void *) &bar0->mac_cfg; val64 = readq(&bar0->mac_cfg); val64 &= ~(MAC_CFG_RMAC_STRIP_PAD); writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key); @@ -955,8 +1412,8 @@ static int init_nic(struct s2io_nic *nic) writel((u32) (val64 >> 32), (add + 4)); val64 = readq(&bar0->mac_cfg); - /* - * Set the time value to be inserted in the pause frame + /* + * Set the time value to be inserted in the pause frame * generated by xena. */ val64 = readq(&bar0->rmac_pause_cfg); @@ -964,7 +1421,7 @@ static int init_nic(struct s2io_nic *nic) val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time); writeq(val64, &bar0->rmac_pause_cfg); - /* + /* * Set the Threshold Limit for Generating the pause frame * If the amount of data in any Queue exceeds ratio of * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256 @@ -988,25 +1445,54 @@ static int init_nic(struct s2io_nic *nic) } writeq(val64, &bar0->mc_pause_thresh_q4q7); - /* - * TxDMA will stop Read request if the number of read split has + /* + * TxDMA will stop Read request if the number of read split has * exceeded the limit pointed by shared_splits */ val64 = readq(&bar0->pic_control); val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits); writeq(val64, &bar0->pic_control); + /* + * Programming the Herc to split every write transaction + * that does not start on an ADB to reduce disconnects. + */ + if (nic->device_type == XFRAME_II_DEVICE) { + val64 = WREQ_SPLIT_MASK_SET_MASK(255); + writeq(val64, &bar0->wreq_split_mask); + } + + /* Setting Link stability period to 64 ms */ + if (nic->device_type == XFRAME_II_DEVICE) { + val64 = MISC_LINK_STABILITY_PRD(3); + writeq(val64, &bar0->misc_control); + } + return SUCCESS; } +#define LINK_UP_DOWN_INTERRUPT 1 +#define MAC_RMAC_ERR_TIMER 2 -/** - * en_dis_able_nic_intrs - Enable or Disable the interrupts +#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE) +#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER +#else +int s2io_link_fault_indication(nic_t *nic) +{ + if (nic->device_type == XFRAME_II_DEVICE) + return LINK_UP_DOWN_INTERRUPT; + else + return MAC_RMAC_ERR_TIMER; +} +#endif + +/** + * en_dis_able_nic_intrs - Enable or Disable the interrupts * @nic: device private variable, * @mask: A mask indicating which Intr block must be modified and, * @flag: A flag indicating whether to enable or disable the Intrs. * Description: This function will either disable or enable the interrupts - * depending on the flag argument. The mask argument can be used to - * enable/disable any Intr block. + * depending on the flag argument. The mask argument can be used to + * enable/disable any Intr block. * Return Value: NONE. */ @@ -1024,20 +1510,31 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * Disabled all PCIX, Flash, MDIO, IIC and GPIO - * interrupts for now. - * TODO + /* + * If Hercules adapter enable GPIO otherwise + * disabled all PCIX, Flash, MDIO, IIC and GPIO + * interrupts for now. + * TODO */ - writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); - /* + if (s2io_link_fault_indication(nic) == + LINK_UP_DOWN_INTERRUPT ) { + temp64 = readq(&bar0->pic_int_mask); + temp64 &= ~((u64) PIC_INT_GPIO); + writeq(temp64, &bar0->pic_int_mask); + temp64 = readq(&bar0->gpio_int_mask); + temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP); + writeq(temp64, &bar0->gpio_int_mask); + } else { + writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); + } + /* * No MSI Support is available presently, so TTI and * RTI interrupts are also disabled. */ } else if (flag == DISABLE_INTRS) { - /* - * Disable PIC Intrs in the general - * intr mask register + /* + * Disable PIC Intrs in the general + * intr mask register */ writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask); temp64 = readq(&bar0->general_int_mask); @@ -1055,27 +1552,27 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * Keep all interrupts other than PFC interrupt + /* + * Keep all interrupts other than PFC interrupt * and PCC interrupt disabled in DMA level. */ val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M | TXDMA_PCC_INT_M); writeq(val64, &bar0->txdma_int_mask); - /* - * Enable only the MISC error 1 interrupt in PFC block + /* + * Enable only the MISC error 1 interrupt in PFC block */ val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1); writeq(val64, &bar0->pfc_err_mask); - /* - * Enable only the FB_ECC error interrupt in PCC block + /* + * Enable only the FB_ECC error interrupt in PCC block */ val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR); writeq(val64, &bar0->pcc_err_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable TxDMA Intrs in the general intr mask - * register + /* + * Disable TxDMA Intrs in the general intr mask + * register */ writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask); writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask); @@ -1093,15 +1590,15 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * All RxDMA block interrupts are disabled for now - * TODO + /* + * All RxDMA block interrupts are disabled for now + * TODO */ writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable RxDMA Intrs in the general intr mask - * register + /* + * Disable RxDMA Intrs in the general intr mask + * register */ writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask); temp64 = readq(&bar0->general_int_mask); @@ -1118,22 +1615,13 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * All MAC block error interrupts are disabled for now - * except the link status change interrupt. + /* + * All MAC block error interrupts are disabled for now * TODO */ - val64 = MAC_INT_STATUS_RMAC_INT; - temp64 = readq(&bar0->mac_int_mask); - temp64 &= ~((u64) val64); - writeq(temp64, &bar0->mac_int_mask); - - val64 = readq(&bar0->mac_rmac_err_mask); - val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT); - writeq(val64, &bar0->mac_rmac_err_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable MAC Intrs in the general intr mask register + /* + * Disable MAC Intrs in the general intr mask register */ writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask); writeq(DISABLE_ALL_INTRS, @@ -1152,14 +1640,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* + /* * All XGXS block error interrupts are disabled for now - * TODO + * TODO */ writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable MC Intrs in the general intr mask register + /* + * Disable MC Intrs in the general intr mask register */ writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask); temp64 = readq(&bar0->general_int_mask); @@ -1175,11 +1663,11 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* - * All MC block error interrupts are disabled for now - * TODO + /* + * Enable all MC Intrs. */ - writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask); + writeq(0x0, &bar0->mc_int_mask); + writeq(0x0, &bar0->mc_err_mask); } else if (flag == DISABLE_INTRS) { /* * Disable MC Intrs in the general intr mask register @@ -1199,14 +1687,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 = readq(&bar0->general_int_mask); temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); - /* + /* * Enable all the Tx side interrupts - * writing 0 Enables all 64 TX interrupt levels + * writing 0 Enables all 64 TX interrupt levels */ writeq(0x0, &bar0->tx_traffic_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable Tx Traffic Intrs in the general intr mask + /* + * Disable Tx Traffic Intrs in the general intr mask * register. */ writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask); @@ -1226,8 +1714,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) /* writing 0 Enables all 8 RX interrupt levels */ writeq(0x0, &bar0->rx_traffic_mask); } else if (flag == DISABLE_INTRS) { - /* - * Disable Rx Traffic Intrs in the general intr mask + /* + * Disable Rx Traffic Intrs in the general intr mask * register. */ writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask); @@ -1238,24 +1726,66 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) } } -/** - * verify_xena_quiescence - Checks whether the H/W is ready +static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc) +{ + int ret = 0; + + if (flag == FALSE) { + if ((!herc && (rev_id >= 4)) || herc) { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + ret = 1; + } + }else { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + ret = 1; + } + } + } else { + if ((!herc && (rev_id >= 4)) || herc) { + if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == + ADAPTER_STATUS_RMAC_PCC_IDLE) && + (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ret = 1; + } + } else { + if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) == + ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && + (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ret = 1; + } + } + } + + return ret; +} +/** + * verify_xena_quiescence - Checks whether the H/W is ready * @val64 : Value read from adapter status register. * @flag : indicates if the adapter enable bit was ever written once * before. * Description: Returns whether the H/W is ready to go or not. Depending - * on whether adapter enable bit was written or not the comparison + * on whether adapter enable bit was written or not the comparison * differs and the calling function passes the input argument flag to * indicate this. - * Return: 1 If xena is quiescence + * Return: 1 If xena is quiescence * 0 If Xena is not quiescence */ -static int verify_xena_quiescence(u64 val64, int flag) +static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) { - int ret = 0; + int ret = 0, herc; u64 tmp64 = ~((u64) val64); + int rev_id = get_xena_rev_id(sp->pdev); + herc = (sp->device_type == XFRAME_II_DEVICE); if (! (tmp64 & (ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY | @@ -1263,25 +1793,7 @@ static int verify_xena_quiescence(u64 val64, int flag) ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY | ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK | ADAPTER_STATUS_P_PLL_LOCK))) { - if (flag == FALSE) { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT)) { - - ret = 1; - - } - } else { - if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == - ADAPTER_STATUS_RMAC_PCC_IDLE) && - (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT))) { - - ret = 1; - - } - } + ret = check_prc_pcc_state(val64, flag, rev_id, herc); } return ret; @@ -1290,12 +1802,12 @@ static int verify_xena_quiescence(u64 val64, int flag) /** * fix_mac_address - Fix for Mac addr problem on Alpha platforms * @sp: Pointer to device specifc structure - * Description : + * Description : * New procedure to clear mac address reading problems on Alpha platforms * */ -static void fix_mac_address(nic_t * sp) +void fix_mac_address(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; @@ -1303,20 +1815,21 @@ static void fix_mac_address(nic_t * sp) while (fix_mac[i] != END_SIGN) { writeq(fix_mac[i++], &bar0->gpio_control); + udelay(10); val64 = readq(&bar0->gpio_control); } } /** - * start_nic - Turns the device on + * start_nic - Turns the device on * @nic : device private variable. - * Description: - * This function actually turns the device on. Before this function is - * called,all Registers are configured from their reset states - * and shared memory is allocated but the NIC is still quiescent. On + * Description: + * This function actually turns the device on. Before this function is + * called,all Registers are configured from their reset states + * and shared memory is allocated but the NIC is still quiescent. On * calling this function, the device interrupts are cleared and the NIC is * literally switched on by writing into the adapter control register. - * Return Value: + * Return Value: * SUCCESS on success and -1 on failure. */ @@ -1325,8 +1838,8 @@ static int start_nic(struct s2io_nic *nic) XENA_dev_config_t __iomem *bar0 = nic->bar0; struct net_device *dev = nic->dev; register u64 val64 = 0; - u16 interruptible, i; - u16 subid; + u16 interruptible; + u16 subid, i; mac_info_t *mac_control; struct config_param *config; @@ -1335,10 +1848,12 @@ static int start_nic(struct s2io_nic *nic) /* PRC Initialization and configuration */ for (i = 0; i < config->rx_ring_num; i++) { - writeq((u64) nic->rx_blocks[i][0].block_dma_addr, + writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr, &bar0->prc_rxd0_n[i]); val64 = readq(&bar0->prc_ctrl_n[i]); + if (nic->config.bimodal) + val64 |= PRC_CTRL_BIMODAL_INTERRUPT; #ifndef CONFIG_2BUFF_MODE val64 |= PRC_CTRL_RC_ENABLED; #else @@ -1354,7 +1869,7 @@ static int start_nic(struct s2io_nic *nic) writeq(val64, &bar0->rx_pa_cfg); #endif - /* + /* * Enabling MC-RLDRAM. After enabling the device, we timeout * for around 100ms, which is approximately the time required * for the device to be ready for operation. @@ -1364,27 +1879,27 @@ static int start_nic(struct s2io_nic *nic) SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF); val64 = readq(&bar0->mc_rldram_mrs); - msleep(100); /* Delay by around 100 ms. */ + msleep(100); /* Delay by around 100 ms. */ /* Enabling ECC Protection. */ val64 = readq(&bar0->adapter_control); val64 &= ~ADAPTER_ECC_EN; writeq(val64, &bar0->adapter_control); - /* - * Clearing any possible Link state change interrupts that + /* + * Clearing any possible Link state change interrupts that * could have popped up just before Enabling the card. */ val64 = readq(&bar0->mac_rmac_err_reg); if (val64) writeq(val64, &bar0->mac_rmac_err_reg); - /* - * Verify if the device is ready to be enabled, if so enable + /* + * Verify if the device is ready to be enabled, if so enable * it. */ val64 = readq(&bar0->adapter_status); - if (!verify_xena_quiescence(val64, nic->device_enabled_once)) { + if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) { DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name); DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n", (unsigned long long) val64); @@ -1392,16 +1907,18 @@ static int start_nic(struct s2io_nic *nic) } /* Enable select interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; + en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); - /* + /* * With some switches, link might be already up at this point. - * Because of this weird behavior, when we enable laser, - * we may not get link. We need to handle this. We cannot - * figure out which switch is misbehaving. So we are forced to - * make a global change. + * Because of this weird behavior, when we enable laser, + * we may not get link. We need to handle this. We cannot + * figure out which switch is misbehaving. So we are forced to + * make a global change. */ /* Enabling Laser. */ @@ -1411,44 +1928,30 @@ static int start_nic(struct s2io_nic *nic) /* SXE-002: Initialize link and activity LED */ subid = nic->pdev->subsystem_device; - if ((subid & 0xFF) >= 0x07) { + if (((subid & 0xFF) >= 0x07) && + (nic->device_type == XFRAME_I_DEVICE)) { val64 = readq(&bar0->gpio_control); val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *) bar0 + 0x2700); + writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700)); } - /* - * Don't see link state interrupts on certain switches, so + /* + * Don't see link state interrupts on certain switches, so * directly scheduling a link state task from here. */ schedule_work(&nic->set_link_task); - /* - * Here we are performing soft reset on XGXS to - * force link down. Since link is already up, we will get - * link state change interrupt after this reset - */ - SPECIAL_REG_WRITE(0x80010515001E0000ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - SPECIAL_REG_WRITE(0x80010515001E00E0ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - SPECIAL_REG_WRITE(0x80070515001F00E4ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - return SUCCESS; } -/** - * free_tx_buffers - Free all queued Tx buffers +/** + * free_tx_buffers - Free all queued Tx buffers * @nic : device private variable. - * Description: + * Description: * Free all queued Tx buffers. - * Return Value: void + * Return Value: void */ static void free_tx_buffers(struct s2io_nic *nic) @@ -1459,39 +1962,61 @@ static void free_tx_buffers(struct s2io_nic *nic) int i, j; mac_info_t *mac_control; struct config_param *config; - int cnt = 0; + int cnt = 0, frg_cnt; mac_control = &nic->mac_control; config = &nic->config; for (i = 0; i < config->tx_fifo_num; i++) { for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) { - txdp = (TxD_t *) nic->list_info[i][j]. + txdp = (TxD_t *) mac_control->fifos[i].list_info[j]. list_virt_addr; skb = (struct sk_buff *) ((unsigned long) txdp-> Host_Control); if (skb == NULL) { - memset(txdp, 0, sizeof(TxD_t)); + memset(txdp, 0, sizeof(TxD_t) * + config->max_txds); continue; } + frg_cnt = skb_shinfo(skb)->nr_frags; + pci_unmap_single(nic->pdev, (dma_addr_t) + txdp->Buffer_Pointer, + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + if (frg_cnt) { + TxD_t *temp; + temp = txdp; + txdp++; + for (j = 0; j < frg_cnt; j++, txdp++) { + skb_frag_t *frag = + &skb_shinfo(skb)->frags[j]; + pci_unmap_page(nic->pdev, + (dma_addr_t) + txdp-> + Buffer_Pointer, + frag->size, + PCI_DMA_TODEVICE); + } + txdp = temp; + } dev_kfree_skb(skb); - memset(txdp, 0, sizeof(TxD_t)); + memset(txdp, 0, sizeof(TxD_t) * config->max_txds); cnt++; } DBG_PRINT(INTR_DBG, "%s:forcibly freeing %d skbs on FIFO%d\n", dev->name, cnt, i); - mac_control->tx_curr_get_info[i].offset = 0; - mac_control->tx_curr_put_info[i].offset = 0; + mac_control->fifos[i].tx_curr_get_info.offset = 0; + mac_control->fifos[i].tx_curr_put_info.offset = 0; } } -/** - * stop_nic - To stop the nic +/** + * stop_nic - To stop the nic * @nic ; device private variable. - * Description: - * This function does exactly the opposite of what the start_nic() + * Description: + * This function does exactly the opposite of what the start_nic() * function does. This function is called to stop the device. * Return Value: * void. @@ -1509,8 +2034,9 @@ static void stop_nic(struct s2io_nic *nic) config = &nic->config; /* Disable all interrupts */ - interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR; + interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; + interruptible |= TX_PIC_INTR | RX_PIC_INTR; + interruptible |= TX_MAC_INTR | RX_MAC_INTR; en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); /* Disable PRCs */ @@ -1521,11 +2047,11 @@ static void stop_nic(struct s2io_nic *nic) } } -/** - * fill_rx_buffers - Allocates the Rx side skbs +/** + * fill_rx_buffers - Allocates the Rx side skbs * @nic: device private variable - * @ring_no: ring number - * Description: + * @ring_no: ring number + * Description: * The function allocates Rx side skbs and puts the physical * address of these buffers into the RxD buffer pointers, so that the NIC * can DMA the received frame into these locations. @@ -1533,8 +2059,8 @@ static void stop_nic(struct s2io_nic *nic) * 1. single buffer, * 2. three buffer and * 3. Five buffer modes. - * Each mode defines how many fragments the received frame will be split - * up into by the NIC. The frame is split into L3 header, L4 Header, + * Each mode defines how many fragments the received frame will be split + * up into by the NIC. The frame is split into L3 header, L4 Header, * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself * is split into 3 fragments. As of now only single buffer mode is * supported. @@ -1542,7 +2068,7 @@ static void stop_nic(struct s2io_nic *nic) * SUCCESS on success or an appropriate -ve value on failure. */ -static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) +int fill_rx_buffers(struct s2io_nic *nic, int ring_no) { struct net_device *dev = nic->dev; struct sk_buff *skb; @@ -1550,34 +2076,35 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) int off, off1, size, block_no, block_no1; int offset, offset1; u32 alloc_tab = 0; - u32 alloc_cnt = nic->pkt_cnt[ring_no] - - atomic_read(&nic->rx_bufs_left[ring_no]); + u32 alloc_cnt; mac_info_t *mac_control; struct config_param *config; #ifdef CONFIG_2BUFF_MODE RxD_t *rxdpnext; int nextblk; - unsigned long tmp; + u64 tmp; buffAdd_t *ba; dma_addr_t rxdpphys; #endif #ifndef CONFIG_S2IO_NAPI unsigned long flags; #endif + RxD_t *first_rxdp = NULL; mac_control = &nic->mac_control; config = &nic->config; - + alloc_cnt = mac_control->rings[ring_no].pkt_cnt - + atomic_read(&nic->rx_bufs_left[ring_no]); size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE + HEADER_802_2_SIZE + HEADER_SNAP_SIZE; while (alloc_tab < alloc_cnt) { - block_no = mac_control->rx_curr_put_info[ring_no]. + block_no = mac_control->rings[ring_no].rx_curr_put_info. block_index; - block_no1 = mac_control->rx_curr_get_info[ring_no]. + block_no1 = mac_control->rings[ring_no].rx_curr_get_info. block_index; - off = mac_control->rx_curr_put_info[ring_no].offset; - off1 = mac_control->rx_curr_get_info[ring_no].offset; + off = mac_control->rings[ring_no].rx_curr_put_info.offset; + off1 = mac_control->rings[ring_no].rx_curr_get_info.offset; #ifndef CONFIG_2BUFF_MODE offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off; offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1; @@ -1586,7 +2113,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1; #endif - rxdp = nic->rx_blocks[ring_no][block_no]. + rxdp = mac_control->rings[ring_no].rx_blocks[block_no]. block_virt_addr + off; if ((offset == offset1) && (rxdp->Host_Control)) { DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name); @@ -1595,15 +2122,15 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) } #ifndef CONFIG_2BUFF_MODE if (rxdp->Control_1 == END_OF_BLOCK) { - mac_control->rx_curr_put_info[ring_no]. + mac_control->rings[ring_no].rx_curr_put_info. block_index++; - mac_control->rx_curr_put_info[ring_no]. - block_index %= nic->block_count[ring_no]; - block_no = mac_control->rx_curr_put_info - [ring_no].block_index; + mac_control->rings[ring_no].rx_curr_put_info. + block_index %= mac_control->rings[ring_no].block_count; + block_no = mac_control->rings[ring_no].rx_curr_put_info. + block_index; off++; off %= (MAX_RXDS_PER_BLOCK + 1); - mac_control->rx_curr_put_info[ring_no].offset = + mac_control->rings[ring_no].rx_curr_put_info.offset = off; rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2); DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", @@ -1611,30 +2138,30 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) } #ifndef CONFIG_S2IO_NAPI spin_lock_irqsave(&nic->put_lock, flags); - nic->put_pos[ring_no] = + mac_control->rings[ring_no].put_pos = (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off; spin_unlock_irqrestore(&nic->put_lock, flags); #endif #else if (rxdp->Host_Control == END_OF_BLOCK) { - mac_control->rx_curr_put_info[ring_no]. + mac_control->rings[ring_no].rx_curr_put_info. block_index++; - mac_control->rx_curr_put_info[ring_no]. - block_index %= nic->block_count[ring_no]; - block_no = mac_control->rx_curr_put_info - [ring_no].block_index; + mac_control->rings[ring_no].rx_curr_put_info.block_index + %= mac_control->rings[ring_no].block_count; + block_no = mac_control->rings[ring_no].rx_curr_put_info + .block_index; off = 0; DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n", dev->name, block_no, (unsigned long long) rxdp->Control_1); - mac_control->rx_curr_put_info[ring_no].offset = + mac_control->rings[ring_no].rx_curr_put_info.offset = off; - rxdp = nic->rx_blocks[ring_no][block_no]. + rxdp = mac_control->rings[ring_no].rx_blocks[block_no]. block_virt_addr; } #ifndef CONFIG_S2IO_NAPI spin_lock_irqsave(&nic->put_lock, flags); - nic->put_pos[ring_no] = (block_no * + mac_control->rings[ring_no].put_pos = (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off; spin_unlock_irqrestore(&nic->put_lock, flags); #endif @@ -1646,27 +2173,27 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) if (rxdp->Control_2 & BIT(0)) #endif { - mac_control->rx_curr_put_info[ring_no]. + mac_control->rings[ring_no].rx_curr_put_info. offset = off; goto end; } #ifdef CONFIG_2BUFF_MODE - /* - * RxDs Spanning cache lines will be replenished only - * if the succeeding RxD is also owned by Host. It - * will always be the ((8*i)+3) and ((8*i)+6) - * descriptors for the 48 byte descriptor. The offending + /* + * RxDs Spanning cache lines will be replenished only + * if the succeeding RxD is also owned by Host. It + * will always be the ((8*i)+3) and ((8*i)+6) + * descriptors for the 48 byte descriptor. The offending * decsriptor is of-course the 3rd descriptor. */ - rxdpphys = nic->rx_blocks[ring_no][block_no]. + rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no]. block_dma_addr + (off * sizeof(RxD_t)); if (((u64) (rxdpphys)) % 128 > 80) { - rxdpnext = nic->rx_blocks[ring_no][block_no]. + rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no]. block_virt_addr + (off + 1); if (rxdpnext->Host_Control == END_OF_BLOCK) { nextblk = (block_no + 1) % - (nic->block_count[ring_no]); - rxdpnext = nic->rx_blocks[ring_no] + (mac_control->rings[ring_no].block_count); + rxdpnext = mac_control->rings[ring_no].rx_blocks [nextblk].block_virt_addr; } if (rxdpnext->Control_2 & BIT(0)) @@ -1682,6 +2209,10 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) if (!skb) { DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name); DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n"); + if (first_rxdp) { + wmb(); + first_rxdp->Control_1 |= RXD_OWN_XENA; + } return -ENOMEM; } #ifndef CONFIG_2BUFF_MODE @@ -1692,12 +2223,13 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) rxdp->Control_2 &= (~MASK_BUFFER0_SIZE); rxdp->Control_2 |= SET_BUFFER0_SIZE(size); rxdp->Host_Control = (unsigned long) (skb); - rxdp->Control_1 |= RXD_OWN_XENA; + if (alloc_tab & ((1 << rxsync_frequency) - 1)) + rxdp->Control_1 |= RXD_OWN_XENA; off++; off %= (MAX_RXDS_PER_BLOCK + 1); - mac_control->rx_curr_put_info[ring_no].offset = off; + mac_control->rings[ring_no].rx_curr_put_info.offset = off; #else - ba = &nic->ba[ring_no][block_no][off]; + ba = &mac_control->rings[ring_no].ba[block_no][off]; skb_reserve(skb, BUF0_LEN); tmp = ((unsigned long) skb->data & ALIGN_SIZE); if (tmp) @@ -1719,22 +2251,41 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no) rxdp->Control_2 |= SET_BUFFER1_SIZE(1); /* dummy. */ rxdp->Control_2 |= BIT(0); /* Set Buffer_Empty bit. */ rxdp->Host_Control = (u64) ((unsigned long) (skb)); - rxdp->Control_1 |= RXD_OWN_XENA; + if (alloc_tab & ((1 << rxsync_frequency) - 1)) + rxdp->Control_1 |= RXD_OWN_XENA; off++; - mac_control->rx_curr_put_info[ring_no].offset = off; + mac_control->rings[ring_no].rx_curr_put_info.offset = off; #endif + rxdp->Control_2 |= SET_RXD_MARKER; + + if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) { + if (first_rxdp) { + wmb(); + first_rxdp->Control_1 |= RXD_OWN_XENA; + } + first_rxdp = rxdp; + } atomic_inc(&nic->rx_bufs_left[ring_no]); alloc_tab++; } end: + /* Transfer ownership of first descriptor to adapter just before + * exiting. Before that, use memory barrier so that ownership + * and other fields are seen by adapter correctly. + */ + if (first_rxdp) { + wmb(); + first_rxdp->Control_1 |= RXD_OWN_XENA; + } + return SUCCESS; } /** - * free_rx_buffers - Frees all Rx buffers + * free_rx_buffers - Frees all Rx buffers * @sp: device private variable. - * Description: + * Description: * This function will free all Rx buffers allocated by host. * Return Value: * NONE. @@ -1758,7 +2309,8 @@ static void free_rx_buffers(struct s2io_nic *sp) for (i = 0; i < config->rx_ring_num; i++) { for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) { off = j % (MAX_RXDS_PER_BLOCK + 1); - rxdp = sp->rx_blocks[i][blk].block_virt_addr + off; + rxdp = mac_control->rings[i].rx_blocks[blk]. + block_virt_addr + off; #ifndef CONFIG_2BUFF_MODE if (rxdp->Control_1 == END_OF_BLOCK) { @@ -1793,7 +2345,7 @@ static void free_rx_buffers(struct s2io_nic *sp) HEADER_SNAP_SIZE, PCI_DMA_FROMDEVICE); #else - ba = &sp->ba[i][blk][off]; + ba = &mac_control->rings[i].ba[blk][off]; pci_unmap_single(sp->pdev, (dma_addr_t) rxdp->Buffer0_ptr, BUF0_LEN, @@ -1813,10 +2365,10 @@ static void free_rx_buffers(struct s2io_nic *sp) } memset(rxdp, 0, sizeof(RxD_t)); } - mac_control->rx_curr_put_info[i].block_index = 0; - mac_control->rx_curr_get_info[i].block_index = 0; - mac_control->rx_curr_put_info[i].offset = 0; - mac_control->rx_curr_get_info[i].offset = 0; + mac_control->rings[i].rx_curr_put_info.block_index = 0; + mac_control->rings[i].rx_curr_get_info.block_index = 0; + mac_control->rings[i].rx_curr_put_info.offset = 0; + mac_control->rings[i].rx_curr_get_info.offset = 0; atomic_set(&sp->rx_bufs_left[i], 0); DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n", dev->name, buf_cnt, i); @@ -1826,7 +2378,7 @@ static void free_rx_buffers(struct s2io_nic *sp) /** * s2io_poll - Rx interrupt handler for NAPI support * @dev : pointer to the device structure. - * @budget : The number of packets that were budgeted to be processed + * @budget : The number of packets that were budgeted to be processed * during one pass through the 'Poll" function. * Description: * Comes into picture only if NAPI support has been incorporated. It does @@ -1836,160 +2388,36 @@ static void free_rx_buffers(struct s2io_nic *sp) * 0 on success and 1 if there are No Rx packets to be processed. */ -#ifdef CONFIG_S2IO_NAPI +#if defined(CONFIG_S2IO_NAPI) static int s2io_poll(struct net_device *dev, int *budget) { nic_t *nic = dev->priv; - XENA_dev_config_t __iomem *bar0 = nic->bar0; - int pkts_to_process = *budget, pkt_cnt = 0; - register u64 val64 = 0; - rx_curr_get_info_t get_info, put_info; - int i, get_block, put_block, get_offset, put_offset, ring_bufs; -#ifndef CONFIG_2BUFF_MODE - u16 val16, cksum; -#endif - struct sk_buff *skb; - RxD_t *rxdp; + int pkt_cnt = 0, org_pkts_to_process; mac_info_t *mac_control; struct config_param *config; -#ifdef CONFIG_2BUFF_MODE - buffAdd_t *ba; -#endif + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + u64 val64; + int i; + atomic_inc(&nic->isr_cnt); mac_control = &nic->mac_control; config = &nic->config; - if (pkts_to_process > dev->quota) - pkts_to_process = dev->quota; + nic->pkts_to_process = *budget; + if (nic->pkts_to_process > dev->quota) + nic->pkts_to_process = dev->quota; + org_pkts_to_process = nic->pkts_to_process; val64 = readq(&bar0->rx_traffic_int); writeq(val64, &bar0->rx_traffic_int); for (i = 0; i < config->rx_ring_num; i++) { - get_info = mac_control->rx_curr_get_info[i]; - get_block = get_info.block_index; - put_info = mac_control->rx_curr_put_info[i]; - put_block = put_info.block_index; - ring_bufs = config->rx_cfg[i].num_rxd; - rxdp = nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; -#ifndef CONFIG_2BUFF_MODE - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + - put_info.offset; - while ((!(rxdp->Control_1 & RXD_OWN_XENA)) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - if (--pkts_to_process < 0) { - goto no_rx; - } - if (rxdp->Control_1 == END_OF_BLOCK) { - rxdp = - (RxD_t *) ((unsigned long) rxdp-> - Control_2); - get_info.offset++; - get_info.offset %= - (MAX_RXDS_PER_BLOCK + 1); - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - continue; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - skb = - (struct sk_buff *) ((unsigned long) rxdp-> - Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - goto no_rx; - } - val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); - val16 = (u16) (val64 >> 48); - cksum = RXD_GET_L4_CKSUM(rxdp->Control_1); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - dev->mtu + - HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + - HEADER_SNAP_SIZE, - PCI_DMA_FROMDEVICE); - rx_osm_handler(nic, val16, rxdp, i); - pkt_cnt++; - get_info.offset++; - get_info.offset %= (MAX_RXDS_PER_BLOCK + 1); - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; + rx_intr_handler(&mac_control->rings[i]); + pkt_cnt = org_pkts_to_process - nic->pkts_to_process; + if (!nic->pkts_to_process) { + /* Quota for the current iteration has been met */ + goto no_rx; } -#else - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + - put_info.offset; - while (((!(rxdp->Control_1 & RXD_OWN_XENA)) && - !(rxdp->Control_2 & BIT(0))) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - if (--pkts_to_process < 0) { - goto no_rx; - } - skb = (struct sk_buff *) ((unsigned long) - rxdp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - goto no_rx; - } - - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - BUF0_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer1_ptr, - BUF1_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer2_ptr, - dev->mtu + BUF0_LEN + 4, - PCI_DMA_FROMDEVICE); - ba = &nic->ba[i][get_block][get_info.offset]; - - rx_osm_handler(nic, rxdp, i, ba); - - get_info.offset++; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; - - if (get_info.offset && - (!(get_info.offset % MAX_RXDS_PER_BLOCK))) { - get_info.offset = 0; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - rxdp = - nic->rx_blocks[i][get_block]. - block_virt_addr; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - pkt_cnt++; - } -#endif } if (!pkt_cnt) pkt_cnt = 1; @@ -2007,9 +2435,10 @@ static int s2io_poll(struct net_device *dev, int *budget) } /* Re enable the Rx interrupts. */ en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS); + atomic_dec(&nic->isr_cnt); return 0; - no_rx: +no_rx: dev->quota -= pkt_cnt; *budget -= pkt_cnt; @@ -2020,279 +2449,204 @@ static int s2io_poll(struct net_device *dev, int *budget) break; } } + atomic_dec(&nic->isr_cnt); return 1; } -#else -/** +#endif + +/** * rx_intr_handler - Rx interrupt handler * @nic: device private variable. - * Description: - * If the interrupt is because of a received frame or if the + * Description: + * If the interrupt is because of a received frame or if the * receive ring contains fresh as yet un-processed frames,this function is - * called. It picks out the RxD at which place the last Rx processing had - * stopped and sends the skb to the OSM's Rx handler and then increments + * called. It picks out the RxD at which place the last Rx processing had + * stopped and sends the skb to the OSM's Rx handler and then increments * the offset. * Return Value: * NONE. */ - -static void rx_intr_handler(struct s2io_nic *nic) +static void rx_intr_handler(ring_info_t *ring_data) { + nic_t *nic = ring_data->nic; struct net_device *dev = (struct net_device *) nic->dev; - XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0; + int get_block, get_offset, put_block, put_offset, ring_bufs; rx_curr_get_info_t get_info, put_info; RxD_t *rxdp; struct sk_buff *skb; -#ifndef CONFIG_2BUFF_MODE - u16 val16, cksum; -#endif - register u64 val64 = 0; - int get_block, get_offset, put_block, put_offset, ring_bufs; - int i, pkt_cnt = 0; - mac_info_t *mac_control; - struct config_param *config; -#ifdef CONFIG_2BUFF_MODE - buffAdd_t *ba; +#ifndef CONFIG_S2IO_NAPI + int pkt_cnt = 0; #endif + spin_lock(&nic->rx_lock); + if (atomic_read(&nic->card_state) == CARD_DOWN) { + DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n", + __FUNCTION__, dev->name); + spin_unlock(&nic->rx_lock); + } - mac_control = &nic->mac_control; - config = &nic->config; - - /* - * rx_traffic_int reg is an R1 register, hence we read and write back - * the samevalue in the register to clear it. - */ - val64 = readq(&bar0->rx_traffic_int); - writeq(val64, &bar0->rx_traffic_int); - - for (i = 0; i < config->rx_ring_num; i++) { - get_info = mac_control->rx_curr_get_info[i]; - get_block = get_info.block_index; - put_info = mac_control->rx_curr_put_info[i]; - put_block = put_info.block_index; - ring_bufs = config->rx_cfg[i].num_rxd; - rxdp = nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; -#ifndef CONFIG_2BUFF_MODE - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + + get_info = ring_data->rx_curr_get_info; + get_block = get_info.block_index; + put_info = ring_data->rx_curr_put_info; + put_block = put_info.block_index; + ring_bufs = get_info.ring_len+1; + rxdp = ring_data->rx_blocks[get_block].block_virt_addr + get_info.offset; - spin_lock(&nic->put_lock); - put_offset = nic->put_pos[i]; - spin_unlock(&nic->put_lock); - while ((!(rxdp->Control_1 & RXD_OWN_XENA)) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - if (rxdp->Control_1 == END_OF_BLOCK) { - rxdp = (RxD_t *) ((unsigned long) - rxdp->Control_2); - get_info.offset++; - get_info.offset %= - (MAX_RXDS_PER_BLOCK + 1); - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - continue; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + - get_info.offset; - skb = (struct sk_buff *) ((unsigned long) - rxdp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - return; - } - val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); - val16 = (u16) (val64 >> 48); - cksum = RXD_GET_L4_CKSUM(rxdp->Control_1); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - dev->mtu + - HEADER_ETHERNET_II_802_3_SIZE + - HEADER_802_2_SIZE + - HEADER_SNAP_SIZE, - PCI_DMA_FROMDEVICE); - rx_osm_handler(nic, val16, rxdp, i); - get_info.offset++; - get_info.offset %= (MAX_RXDS_PER_BLOCK + 1); - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; - pkt_cnt++; - if ((indicate_max_pkts) - && (pkt_cnt > indicate_max_pkts)) - break; + get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + + get_info.offset; +#ifndef CONFIG_S2IO_NAPI + spin_lock(&nic->put_lock); + put_offset = ring_data->put_pos; + spin_unlock(&nic->put_lock); +#else + put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + + put_info.offset; +#endif + while (RXD_IS_UP2DT(rxdp) && + (((get_offset + 1) % ring_bufs) != put_offset)) { + skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control); + if (skb == NULL) { + DBG_PRINT(ERR_DBG, "%s: The skb is ", + dev->name); + DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); + spin_unlock(&nic->rx_lock); + return; } +#ifndef CONFIG_2BUFF_MODE + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer0_ptr, + dev->mtu + + HEADER_ETHERNET_II_802_3_SIZE + + HEADER_802_2_SIZE + + HEADER_SNAP_SIZE, + PCI_DMA_FROMDEVICE); #else - get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer0_ptr, + BUF0_LEN, PCI_DMA_FROMDEVICE); + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer1_ptr, + BUF1_LEN, PCI_DMA_FROMDEVICE); + pci_unmap_single(nic->pdev, (dma_addr_t) + rxdp->Buffer2_ptr, + dev->mtu + BUF0_LEN + 4, + PCI_DMA_FROMDEVICE); +#endif + rx_osm_handler(ring_data, rxdp); + get_info.offset++; + ring_data->rx_curr_get_info.offset = get_info.offset; - spin_lock(&nic->put_lock); - put_offset = nic->put_pos[i]; - spin_unlock(&nic->put_lock); - while (((!(rxdp->Control_1 & RXD_OWN_XENA)) && - !(rxdp->Control_2 & BIT(0))) && - (((get_offset + 1) % ring_bufs) != put_offset)) { - skb = (struct sk_buff *) ((unsigned long) - rxdp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: The skb is ", - dev->name); - DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - return; - } - - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer0_ptr, - BUF0_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer1_ptr, - BUF1_LEN, PCI_DMA_FROMDEVICE); - pci_unmap_single(nic->pdev, (dma_addr_t) - rxdp->Buffer2_ptr, - dev->mtu + BUF0_LEN + 4, - PCI_DMA_FROMDEVICE); - ba = &nic->ba[i][get_block][get_info.offset]; - - rx_osm_handler(nic, rxdp, i, ba); - - get_info.offset++; - mac_control->rx_curr_get_info[i].offset = - get_info.offset; - rxdp = - nic->rx_blocks[i][get_block].block_virt_addr + - get_info.offset; + rxdp = ring_data->rx_blocks[get_block].block_virt_addr + + get_info.offset; + if (get_info.offset && + (!(get_info.offset % MAX_RXDS_PER_BLOCK))) { + get_info.offset = 0; + ring_data->rx_curr_get_info.offset + = get_info.offset; + get_block++; + get_block %= ring_data->block_count; + ring_data->rx_curr_get_info.block_index + = get_block; + rxdp = ring_data->rx_blocks[get_block].block_virt_addr; + } - if (get_info.offset && - (!(get_info.offset % MAX_RXDS_PER_BLOCK))) { - get_info.offset = 0; - mac_control->rx_curr_get_info[i]. - offset = get_info.offset; - get_block++; - get_block %= nic->block_count[i]; - mac_control->rx_curr_get_info[i]. - block_index = get_block; - rxdp = - nic->rx_blocks[i][get_block]. - block_virt_addr; - } - get_offset = - (get_block * (MAX_RXDS_PER_BLOCK + 1)) + + get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) + get_info.offset; - pkt_cnt++; - if ((indicate_max_pkts) - && (pkt_cnt > indicate_max_pkts)) - break; - } -#endif +#ifdef CONFIG_S2IO_NAPI + nic->pkts_to_process -= 1; + if (!nic->pkts_to_process) + break; +#else + pkt_cnt++; if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts)) break; +#endif } + spin_unlock(&nic->rx_lock); } -#endif -/** + +/** * tx_intr_handler - Transmit interrupt handler * @nic : device private variable - * Description: - * If an interrupt was raised to indicate DMA complete of the - * Tx packet, this function is called. It identifies the last TxD - * whose buffer was freed and frees all skbs whose data have already + * Description: + * If an interrupt was raised to indicate DMA complete of the + * Tx packet, this function is called. It identifies the last TxD + * whose buffer was freed and frees all skbs whose data have already * DMA'ed into the NICs internal memory. * Return Value: * NONE */ -static void tx_intr_handler(struct s2io_nic *nic) +static void tx_intr_handler(fifo_info_t *fifo_data) { - XENA_dev_config_t __iomem *bar0 = nic->bar0; + nic_t *nic = fifo_data->nic; struct net_device *dev = (struct net_device *) nic->dev; tx_curr_get_info_t get_info, put_info; struct sk_buff *skb; TxD_t *txdlp; - register u64 val64 = 0; - int i; u16 j, frg_cnt; - mac_info_t *mac_control; - struct config_param *config; - mac_control = &nic->mac_control; - config = &nic->config; - - /* - * tx_traffic_int reg is an R1 register, hence we read and write - * back the samevalue in the register to clear it. - */ - val64 = readq(&bar0->tx_traffic_int); - writeq(val64, &bar0->tx_traffic_int); + get_info = fifo_data->tx_curr_get_info; + put_info = fifo_data->tx_curr_put_info; + txdlp = (TxD_t *) fifo_data->list_info[get_info.offset]. + list_virt_addr; + while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) && + (get_info.offset != put_info.offset) && + (txdlp->Host_Control)) { + /* Check for TxD errors */ + if (txdlp->Control_1 & TXD_T_CODE) { + unsigned long long err; + err = txdlp->Control_1 & TXD_T_CODE; + DBG_PRINT(ERR_DBG, "***TxD error %llx\n", + err); + } - for (i = 0; i < config->tx_fifo_num; i++) { - get_info = mac_control->tx_curr_get_info[i]; - put_info = mac_control->tx_curr_put_info[i]; - txdlp = (TxD_t *) nic->list_info[i][get_info.offset]. - list_virt_addr; - while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) && - (get_info.offset != put_info.offset) && - (txdlp->Host_Control)) { - /* Check for TxD errors */ - if (txdlp->Control_1 & TXD_T_CODE) { - unsigned long long err; - err = txdlp->Control_1 & TXD_T_CODE; - DBG_PRINT(ERR_DBG, "***TxD error %llx\n", - err); - } + skb = (struct sk_buff *) ((unsigned long) + txdlp->Host_Control); + if (skb == NULL) { + DBG_PRINT(ERR_DBG, "%s: Null skb ", + __FUNCTION__); + DBG_PRINT(ERR_DBG, "in Tx Free Intr\n"); + return; + } - skb = (struct sk_buff *) ((unsigned long) - txdlp->Host_Control); - if (skb == NULL) { - DBG_PRINT(ERR_DBG, "%s: Null skb ", - dev->name); - DBG_PRINT(ERR_DBG, "in Tx Free Intr\n"); - return; + frg_cnt = skb_shinfo(skb)->nr_frags; + nic->tx_pkt_count++; + + pci_unmap_single(nic->pdev, (dma_addr_t) + txdlp->Buffer_Pointer, + skb->len - skb->data_len, + PCI_DMA_TODEVICE); + if (frg_cnt) { + TxD_t *temp; + temp = txdlp; + txdlp++; + for (j = 0; j < frg_cnt; j++, txdlp++) { + skb_frag_t *frag = + &skb_shinfo(skb)->frags[j]; + if (!txdlp->Buffer_Pointer) + break; + pci_unmap_page(nic->pdev, + (dma_addr_t) + txdlp-> + Buffer_Pointer, + frag->size, + PCI_DMA_TODEVICE); } - nic->tx_pkt_count++; - - frg_cnt = skb_shinfo(skb)->nr_frags; - - /* For unfragmented skb */ - pci_unmap_single(nic->pdev, (dma_addr_t) - txdlp->Buffer_Pointer, - skb->len - skb->data_len, - PCI_DMA_TODEVICE); - if (frg_cnt) { - TxD_t *temp = txdlp; - txdlp++; - for (j = 0; j < frg_cnt; j++, txdlp++) { - skb_frag_t *frag = - &skb_shinfo(skb)->frags[j]; - pci_unmap_page(nic->pdev, - (dma_addr_t) - txdlp-> - Buffer_Pointer, - frag->size, - PCI_DMA_TODEVICE); - } - txdlp = temp; - } - memset(txdlp, 0, - (sizeof(TxD_t) * config->max_txds)); - - /* Updating the statistics block */ - nic->stats.tx_packets++; - nic->stats.tx_bytes += skb->len; - dev_kfree_skb_irq(skb); - - get_info.offset++; - get_info.offset %= get_info.fifo_len + 1; - txdlp = (TxD_t *) nic->list_info[i] - [get_info.offset].list_virt_addr; - mac_control->tx_curr_get_info[i].offset = - get_info.offset; + txdlp = temp; } + memset(txdlp, 0, + (sizeof(TxD_t) * fifo_data->max_txds)); + + /* Updating the statistics block */ + nic->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + + get_info.offset++; + get_info.offset %= get_info.fifo_len + 1; + txdlp = (TxD_t *) fifo_data->list_info + [get_info.offset].list_virt_addr; + fifo_data->tx_curr_get_info.offset = + get_info.offset; } spin_lock(&nic->tx_lock); @@ -2301,13 +2655,13 @@ static void tx_intr_handler(struct s2io_nic *nic) spin_unlock(&nic->tx_lock); } -/** +/** * alarm_intr_handler - Alarm Interrrupt handler * @nic: device private variable - * Description: If the interrupt was neither because of Rx packet or Tx + * Description: If the interrupt was neither because of Rx packet or Tx * complete, this function is called. If the interrupt was to indicate - * a loss of link, the OSM link status handler is invoked for any other - * alarm interrupt the block that raised the interrupt is displayed + * a loss of link, the OSM link status handler is invoked for any other + * alarm interrupt the block that raised the interrupt is displayed * and a H/W reset is issued. * Return Value: * NONE @@ -2320,10 +2674,32 @@ static void alarm_intr_handler(struct s2io_nic *nic) register u64 val64 = 0, err_reg = 0; /* Handling link status change error Intr */ - err_reg = readq(&bar0->mac_rmac_err_reg); - writeq(err_reg, &bar0->mac_rmac_err_reg); - if (err_reg & RMAC_LINK_STATE_CHANGE_INT) { - schedule_work(&nic->set_link_task); + if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { + err_reg = readq(&bar0->mac_rmac_err_reg); + writeq(err_reg, &bar0->mac_rmac_err_reg); + if (err_reg & RMAC_LINK_STATE_CHANGE_INT) { + schedule_work(&nic->set_link_task); + } + } + + /* Handling Ecc errors */ + val64 = readq(&bar0->mc_err_reg); + writeq(val64, &bar0->mc_err_reg); + if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) { + if (val64 & MC_ERR_REG_ECC_ALL_DBL) { + nic->mac_control.stats_info->sw_stat. + double_ecc_errs++; + DBG_PRINT(ERR_DBG, "%s: Device indicates ", + dev->name); + DBG_PRINT(ERR_DBG, "double ECC error!!\n"); + if (nic->device_type != XFRAME_II_DEVICE) { + netif_stop_queue(dev); + schedule_work(&nic->rst_timer_task); + } + } else { + nic->mac_control.stats_info->sw_stat. + single_ecc_errs++; + } } /* In case of a serious error, the device will be Reset. */ @@ -2338,7 +2714,7 @@ static void alarm_intr_handler(struct s2io_nic *nic) /* * Also as mentioned in the latest Errata sheets if the PCC_FB_ECC * Error occurs, the adapter will be recycled by disabling the - * adapter enable bit and enabling it again after the device + * adapter enable bit and enabling it again after the device * becomes Quiescent. */ val64 = readq(&bar0->pcc_err_reg); @@ -2354,18 +2730,18 @@ static void alarm_intr_handler(struct s2io_nic *nic) /* Other type of interrupts are not being handled now, TODO */ } -/** +/** * wait_for_cmd_complete - waits for a command to complete. - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * Description: Function that waits for a command to Write into RMAC - * ADDR DATA registers to be completed and returns either success or - * error depending on whether the command was complete or not. + * Description: Function that waits for a command to Write into RMAC + * ADDR DATA registers to be completed and returns either success or + * error depending on whether the command was complete or not. * Return value: * SUCCESS on success and FAILURE on failure. */ -static int wait_for_cmd_complete(nic_t * sp) +int wait_for_cmd_complete(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; int ret = FAILURE, cnt = 0; @@ -2385,29 +2761,32 @@ static int wait_for_cmd_complete(nic_t * sp) return ret; } -/** - * s2io_reset - Resets the card. +/** + * s2io_reset - Resets the card. * @sp : private member of the device structure. * Description: Function to Reset the card. This function then also - * restores the previously saved PCI configuration space registers as + * restores the previously saved PCI configuration space registers as * the card reset also resets the configuration space. * Return value: * void. */ -static void s2io_reset(nic_t * sp) +void s2io_reset(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; - u16 subid; + u16 subid, pci_cmd; + + /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */ + pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd)); val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); - /* - * At this stage, if the PCI write is indeed completed, the - * card is reset and so is the PCI Config space of the device. - * So a read cannot be issued at this stage on any of the + /* + * At this stage, if the PCI write is indeed completed, the + * card is reset and so is the PCI Config space of the device. + * So a read cannot be issued at this stage on any of the * registers to ensure the write into "sw_reset" register * has gone through. * Question: Is there any system call that will explicitly force @@ -2418,42 +2797,72 @@ static void s2io_reset(nic_t * sp) */ msleep(250); - /* Restore the PCI state saved during initializarion. */ + /* Restore the PCI state saved during initialization. */ pci_restore_state(sp->pdev); + pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, + pci_cmd); s2io_init_pci(sp); msleep(250); + /* Set swapper to enable I/O register access */ + s2io_set_swapper(sp); + + /* Clear certain PCI/PCI-X fields after reset */ + if (sp->device_type == XFRAME_II_DEVICE) { + /* Clear parity err detect bit */ + pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000); + + /* Clearing PCIX Ecc status register */ + pci_write_config_dword(sp->pdev, 0x68, 0x7C); + + /* Clearing PCI_STATUS error reflected here */ + writeq(BIT(62), &bar0->txpic_int_reg); + } + + /* Reset device statistics maintained by OS */ + memset(&sp->stats, 0, sizeof (struct net_device_stats)); + /* SXE-002: Configure link and activity LED to turn it off */ subid = sp->pdev->subsystem_device; - if ((subid & 0xFF) >= 0x07) { + if (((subid & 0xFF) >= 0x07) && + (sp->device_type == XFRAME_I_DEVICE)) { val64 = readq(&bar0->gpio_control); val64 |= 0x0000800000000000ULL; writeq(val64, &bar0->gpio_control); val64 = 0x0411040400000000ULL; - writeq(val64, (void __iomem *) bar0 + 0x2700); + writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700)); + } + + /* + * Clear spurious ECC interrupts that would have occured on + * XFRAME II cards after reset. + */ + if (sp->device_type == XFRAME_II_DEVICE) { + val64 = readq(&bar0->pcc_err_reg); + writeq(val64, &bar0->pcc_err_reg); } sp->device_enabled_once = FALSE; } /** - * s2io_set_swapper - to set the swapper controle on the card - * @sp : private member of the device structure, + * s2io_set_swapper - to set the swapper controle on the card + * @sp : private member of the device structure, * pointer to the s2io_nic structure. - * Description: Function to set the swapper control on the card + * Description: Function to set the swapper control on the card * correctly depending on the 'endianness' of the system. * Return value: * SUCCESS on success and FAILURE on failure. */ -static int s2io_set_swapper(nic_t * sp) +int s2io_set_swapper(nic_t * sp) { struct net_device *dev = sp->dev; XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64, valt, valr; - /* + /* * Set proper endian settings and verify the same by reading * the PIF Feed-back register. */ @@ -2505,8 +2914,9 @@ static int s2io_set_swapper(nic_t * sp) i++; } if(i == 4) { + unsigned long long x = val64; DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr "); - DBG_PRINT(ERR_DBG, "reads:0x%llx\n",val64); + DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x); return FAILURE; } } @@ -2514,8 +2924,8 @@ static int s2io_set_swapper(nic_t * sp) val64 &= 0xFFFF000000000000ULL; #ifdef __BIG_ENDIAN - /* - * The device by default set to a big endian format, so a + /* + * The device by default set to a big endian format, so a * big endian driver need not set anything. */ val64 |= (SWAPPER_CTRL_TXP_FE | @@ -2531,9 +2941,9 @@ static int s2io_set_swapper(nic_t * sp) SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE); writeq(val64, &bar0->swapper_ctrl); #else - /* + /* * Initially we enable all bits to make it accessible by the - * driver, then we selectively enable only those bits that + * driver, then we selectively enable only those bits that * we want to set. */ val64 |= (SWAPPER_CTRL_TXP_FE | @@ -2555,8 +2965,8 @@ static int s2io_set_swapper(nic_t * sp) #endif val64 = readq(&bar0->swapper_ctrl); - /* - * Verifying if endian settings are accurate by reading a + /* + * Verifying if endian settings are accurate by reading a * feedback register. */ val64 = readq(&bar0->pif_rd_swapper_fb); @@ -2576,55 +2986,63 @@ static int s2io_set_swapper(nic_t * sp) * Functions defined below concern the OS part of the driver * * ********************************************************* */ -/** +/** * s2io_open - open entry point of the driver * @dev : pointer to the device structure. * Description: * This function is the open entry point of the driver. It mainly calls a * function to allocate Rx buffers and inserts them into the buffer - * descriptors and then enables the Rx part of the NIC. + * descriptors and then enables the Rx part of the NIC. * Return value: * 0 on success and an appropriate (-)ve integer as defined in errno.h * file on failure. */ -static int s2io_open(struct net_device *dev) +int s2io_open(struct net_device *dev) { nic_t *sp = dev->priv; int err = 0; - /* - * Make sure you have link off by default every time + /* + * Make sure you have link off by default every time * Nic is initialized */ netif_carrier_off(dev); - sp->last_link_state = LINK_DOWN; + sp->last_link_state = 0; /* Initialize H/W and enable interrupts */ if (s2io_card_up(sp)) { DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", dev->name); - return -ENODEV; + err = -ENODEV; + goto hw_init_failed; } /* After proper initialization of H/W, register ISR */ - err = request_irq((int) sp->irq, s2io_isr, SA_SHIRQ, + err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ, sp->name, dev); if (err) { - s2io_reset(sp); DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", dev->name); - return err; + goto isr_registration_failed; } if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) { DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); - s2io_reset(sp); - return -ENODEV; + err = -ENODEV; + goto setting_mac_address_failed; } netif_start_queue(dev); return 0; + +setting_mac_address_failed: + free_irq(sp->pdev->irq, dev); +isr_registration_failed: + del_timer_sync(&sp->alarm_timer); + s2io_reset(sp); +hw_init_failed: + return err; } /** @@ -2640,16 +3058,15 @@ static int s2io_open(struct net_device *dev) * file on failure. */ -static int s2io_close(struct net_device *dev) +int s2io_close(struct net_device *dev) { nic_t *sp = dev->priv; - flush_scheduled_work(); netif_stop_queue(dev); /* Reset card, kill tasklet and free Tx and Rx buffers. */ s2io_card_down(sp); - free_irq(dev->irq, dev); + free_irq(sp->pdev->irq, dev); sp->device_close_flag = TRUE; /* Device is shut down. */ return 0; } @@ -2667,7 +3084,7 @@ static int s2io_close(struct net_device *dev) * 0 on success & 1 on failure. */ -static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) +int s2io_xmit(struct sk_buff *skb, struct net_device *dev) { nic_t *sp = dev->priv; u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off; @@ -2678,29 +3095,39 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) #ifdef NETIF_F_TSO int mss; #endif + u16 vlan_tag = 0; + int vlan_priority = 0; mac_info_t *mac_control; struct config_param *config; - XENA_dev_config_t __iomem *bar0 = sp->bar0; mac_control = &sp->mac_control; config = &sp->config; - DBG_PRINT(TX_DBG, "%s: In S2IO Tx routine\n", dev->name); + DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name); spin_lock_irqsave(&sp->tx_lock, flags); - if (atomic_read(&sp->card_state) == CARD_DOWN) { - DBG_PRINT(ERR_DBG, "%s: Card going down for reset\n", + DBG_PRINT(TX_DBG, "%s: Card going down for reset\n", dev->name); spin_unlock_irqrestore(&sp->tx_lock, flags); - return 1; + dev_kfree_skb(skb); + return 0; } queue = 0; - put_off = (u16) mac_control->tx_curr_put_info[queue].offset; - get_off = (u16) mac_control->tx_curr_get_info[queue].offset; - txdp = (TxD_t *) sp->list_info[queue][put_off].list_virt_addr; - queue_len = mac_control->tx_curr_put_info[queue].fifo_len + 1; + /* Get Fifo number to Transmit based on vlan priority */ + if (sp->vlgrp && vlan_tx_tag_present(skb)) { + vlan_tag = vlan_tx_tag_get(skb); + vlan_priority = vlan_tag >> 13; + queue = config->fifo_mapping[vlan_priority]; + } + + put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset; + get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset; + txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off]. + list_virt_addr; + + queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; /* Avoid "put" pointer going beyond "get" pointer */ if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) { DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n"); @@ -2709,6 +3136,15 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&sp->tx_lock, flags); return 0; } + + /* A buffer with no data will be dropped */ + if (!skb->len) { + DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name); + dev_kfree_skb(skb); + spin_unlock_irqrestore(&sp->tx_lock, flags); + return 0; + } + #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; if (mss) { @@ -2720,9 +3156,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) frg_cnt = skb_shinfo(skb)->nr_frags; frg_len = skb->len - skb->data_len; - txdp->Host_Control = (unsigned long) skb; txdp->Buffer_Pointer = pci_map_single (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); + txdp->Host_Control = (unsigned long) skb; if (skb->ip_summed == CHECKSUM_HW) { txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN | @@ -2731,6 +3167,11 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_2 |= config->tx_intr_type; + if (sp->vlgrp && vlan_tx_tag_present(skb)) { + txdp->Control_2 |= TXD_VLAN_ENABLE; + txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag); + } + txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) | TXD_GATHER_CODE_FIRST); txdp->Control_1 |= TXD_LIST_OWN_XENA; @@ -2738,6 +3179,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) /* For fragmented SKB. */ for (i = 0; i < frg_cnt; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + /* A '0' length fragment will be ignored */ + if (!frag->size) + continue; txdp++; txdp->Buffer_Pointer = (u64) pci_map_page (sp->pdev, frag->page, frag->page_offset, @@ -2747,23 +3191,23 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Control_1 |= TXD_GATHER_CODE_LAST; tx_fifo = mac_control->tx_FIFO_start[queue]; - val64 = sp->list_info[queue][put_off].list_phy_addr; + val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr; writeq(val64, &tx_fifo->TxDL_Pointer); val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST | TX_FIFO_LAST_LIST); + #ifdef NETIF_F_TSO if (mss) val64 |= TX_FIFO_SPECIAL_FUNC; #endif writeq(val64, &tx_fifo->List_Control); - /* Perform a PCI read to flush previous writes */ - val64 = readq(&bar0->general_int_status); + mmiowb(); put_off++; - put_off %= mac_control->tx_curr_put_info[queue].fifo_len + 1; - mac_control->tx_curr_put_info[queue].offset = put_off; + put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1; + mac_control->fifos[queue].tx_curr_put_info.offset = put_off; /* Avoid "put" pointer going beyond "get" pointer */ if (((put_off + 1) % queue_len) == get_off) { @@ -2779,18 +3223,74 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } +static void +s2io_alarm_handle(unsigned long data) +{ + nic_t *sp = (nic_t *)data; + + alarm_intr_handler(sp); + mod_timer(&sp->alarm_timer, jiffies + HZ / 2); +} + +static void s2io_txpic_intr_handle(nic_t *sp) +{ + XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0; + u64 val64; + + val64 = readq(&bar0->pic_int_status); + if (val64 & PIC_INT_GPIO) { + val64 = readq(&bar0->gpio_int_reg); + if ((val64 & GPIO_INT_REG_LINK_DOWN) && + (val64 & GPIO_INT_REG_LINK_UP)) { + val64 |= GPIO_INT_REG_LINK_DOWN; + val64 |= GPIO_INT_REG_LINK_UP; + writeq(val64, &bar0->gpio_int_reg); + goto masking; + } + + if (((sp->last_link_state == LINK_UP) && + (val64 & GPIO_INT_REG_LINK_DOWN)) || + ((sp->last_link_state == LINK_DOWN) && + (val64 & GPIO_INT_REG_LINK_UP))) { + val64 = readq(&bar0->gpio_int_mask); + val64 |= GPIO_INT_MASK_LINK_DOWN; + val64 |= GPIO_INT_MASK_LINK_UP; + writeq(val64, &bar0->gpio_int_mask); + s2io_set_link((unsigned long)sp); + } +masking: + if (sp->last_link_state == LINK_UP) { + /*enable down interrupt */ + val64 = readq(&bar0->gpio_int_mask); + /* unmasks link down intr */ + val64 &= ~GPIO_INT_MASK_LINK_DOWN; + /* masks link up intr */ + val64 |= GPIO_INT_MASK_LINK_UP; + writeq(val64, &bar0->gpio_int_mask); + } else { + /*enable UP Interrupt */ + val64 = readq(&bar0->gpio_int_mask); + /* unmasks link up interrupt */ + val64 &= ~GPIO_INT_MASK_LINK_UP; + /* masks link down interrupt */ + val64 |= GPIO_INT_MASK_LINK_DOWN; + writeq(val64, &bar0->gpio_int_mask); + } + } +} + /** * s2io_isr - ISR handler of the device . * @irq: the irq of the device. * @dev_id: a void pointer to the dev structure of the NIC. * @pt_regs: pointer to the registers pushed on the stack. - * Description: This function is the ISR handler of the device. It - * identifies the reason for the interrupt and calls the relevant - * service routines. As a contongency measure, this ISR allocates the + * Description: This function is the ISR handler of the device. It + * identifies the reason for the interrupt and calls the relevant + * service routines. As a contongency measure, this ISR allocates the * recv buffers, if their numbers are below the panic value which is * presently set to 25% of the original number of rcv buffers allocated. * Return value: - * IRQ_HANDLED: will be returned if IRQ was handled by this routine + * IRQ_HANDLED: will be returned if IRQ was handled by this routine * IRQ_NONE: will be returned if interrupt is not from our device */ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) @@ -2798,40 +3298,31 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) struct net_device *dev = (struct net_device *) dev_id; nic_t *sp = dev->priv; XENA_dev_config_t __iomem *bar0 = sp->bar0; -#ifndef CONFIG_S2IO_NAPI - int i, ret; -#endif - u64 reason = 0; + int i; + u64 reason = 0, val64; mac_info_t *mac_control; struct config_param *config; + atomic_inc(&sp->isr_cnt); mac_control = &sp->mac_control; config = &sp->config; - /* + /* * Identify the cause for interrupt and call the appropriate * interrupt handler. Causes for the interrupt could be; * 1. Rx of packet. * 2. Tx complete. * 3. Link down. - * 4. Error in any functional blocks of the NIC. + * 4. Error in any functional blocks of the NIC. */ reason = readq(&bar0->general_int_status); if (!reason) { /* The interrupt was not raised by Xena. */ + atomic_dec(&sp->isr_cnt); return IRQ_NONE; } - /* If Intr is because of Tx Traffic */ - if (reason & GEN_INTR_TXTRAFFIC) { - tx_intr_handler(sp); - } - - /* If Intr is because of an error */ - if (reason & (GEN_ERROR_INTR)) - alarm_intr_handler(sp); - #ifdef CONFIG_S2IO_NAPI if (reason & GEN_INTR_RXTRAFFIC) { if (netif_rx_schedule_prep(dev)) { @@ -2843,17 +3334,43 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) #else /* If Intr is because of Rx Traffic */ if (reason & GEN_INTR_RXTRAFFIC) { - rx_intr_handler(sp); + /* + * rx_traffic_int reg is an R1 register, writing all 1's + * will ensure that the actual interrupt causing bit get's + * cleared and hence a read can be avoided. + */ + val64 = 0xFFFFFFFFFFFFFFFFULL; + writeq(val64, &bar0->rx_traffic_int); + for (i = 0; i < config->rx_ring_num; i++) { + rx_intr_handler(&mac_control->rings[i]); + } } #endif - /* - * If the Rx buffer count is below the panic threshold then - * reallocate the buffers from the interrupt handler itself, + /* If Intr is because of Tx Traffic */ + if (reason & GEN_INTR_TXTRAFFIC) { + /* + * tx_traffic_int reg is an R1 register, writing all 1's + * will ensure that the actual interrupt causing bit get's + * cleared and hence a read can be avoided. + */ + val64 = 0xFFFFFFFFFFFFFFFFULL; + writeq(val64, &bar0->tx_traffic_int); + + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&mac_control->fifos[i]); + } + + if (reason & GEN_INTR_TXPIC) + s2io_txpic_intr_handle(sp); + /* + * If the Rx buffer count is below the panic threshold then + * reallocate the buffers from the interrupt handler itself, * else schedule a tasklet to reallocate the buffers. */ #ifndef CONFIG_S2IO_NAPI for (i = 0; i < config->rx_ring_num; i++) { + int ret; int rxb_size = atomic_read(&sp->rx_bufs_left[i]); int level = rx_buffer_level(sp, rxb_size, i); @@ -2865,6 +3382,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) dev->name); DBG_PRINT(ERR_DBG, " in ISR!!\n"); clear_bit(0, (&sp->tasklet_status)); + atomic_dec(&sp->isr_cnt); return IRQ_HANDLED; } clear_bit(0, (&sp->tasklet_status)); @@ -2874,33 +3392,69 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs) } #endif + atomic_dec(&sp->isr_cnt); return IRQ_HANDLED; } /** - * s2io_get_stats - Updates the device statistics structure. + * s2io_updt_stats - + */ +static void s2io_updt_stats(nic_t *sp) +{ + XENA_dev_config_t __iomem *bar0 = sp->bar0; + u64 val64; + int cnt = 0; + + if (atomic_read(&sp->card_state) == CARD_UP) { + /* Apprx 30us on a 133 MHz bus */ + val64 = SET_UPDT_CLICKS(10) | + STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN; + writeq(val64, &bar0->stat_cfg); + do { + udelay(100); + val64 = readq(&bar0->stat_cfg); + if (!(val64 & BIT(0))) + break; + cnt++; + if (cnt == 5) + break; /* Updt failed */ + } while(1); + } +} + +/** + * s2io_get_stats - Updates the device statistics structure. * @dev : pointer to the device structure. * Description: - * This function updates the device statistics structure in the s2io_nic + * This function updates the device statistics structure in the s2io_nic * structure and returns a pointer to the same. * Return value: * pointer to the updated net_device_stats structure. */ -static struct net_device_stats *s2io_get_stats(struct net_device *dev) +struct net_device_stats *s2io_get_stats(struct net_device *dev) { nic_t *sp = dev->priv; mac_info_t *mac_control; struct config_param *config; + mac_control = &sp->mac_control; config = &sp->config; - sp->stats.tx_errors = mac_control->stats_info->tmac_any_err_frms; - sp->stats.rx_errors = mac_control->stats_info->rmac_drop_frms; - sp->stats.multicast = mac_control->stats_info->rmac_vld_mcst_frms; + /* Configure Stats for immediate updt */ + s2io_updt_stats(sp); + + sp->stats.tx_packets = + le32_to_cpu(mac_control->stats_info->tmac_frms); + sp->stats.tx_errors = + le32_to_cpu(mac_control->stats_info->tmac_any_err_frms); + sp->stats.rx_errors = + le32_to_cpu(mac_control->stats_info->rmac_drop_frms); + sp->stats.multicast = + le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms); sp->stats.rx_length_errors = - mac_control->stats_info->rmac_long_frms; + le32_to_cpu(mac_control->stats_info->rmac_long_frms); return (&sp->stats); } @@ -2909,8 +3463,8 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) * s2io_set_multicast - entry point for multicast address enable/disable. * @dev : pointer to the device structure * Description: - * This function is a driver entry point which gets called by the kernel - * whenever multicast addresses must be enabled/disabled. This also gets + * This function is a driver entry point which gets called by the kernel + * whenever multicast addresses must be enabled/disabled. This also gets * called to set/reset promiscuous mode. Depending on the deivce flag, we * determine, if multicast address must be enabled or if promiscuous mode * is to be disabled etc. @@ -2948,6 +3502,8 @@ static void s2io_set_multicast(struct net_device *dev) /* Disable all Multicast addresses */ writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), &bar0->rmac_addr_data0_mem); + writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0), + &bar0->rmac_addr_data1_mem); val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos); @@ -3010,7 +3566,7 @@ static void s2io_set_multicast(struct net_device *dev) writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), &bar0->rmac_addr_data0_mem); writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), - &bar0->rmac_addr_data1_mem); + &bar0->rmac_addr_data1_mem); val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | RMAC_ADDR_CMD_MEM_OFFSET @@ -3039,8 +3595,7 @@ static void s2io_set_multicast(struct net_device *dev) writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr), &bar0->rmac_addr_data0_mem); writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL), - &bar0->rmac_addr_data1_mem); - + &bar0->rmac_addr_data1_mem); val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | RMAC_ADDR_CMD_MEM_OFFSET @@ -3059,12 +3614,12 @@ static void s2io_set_multicast(struct net_device *dev) } /** - * s2io_set_mac_addr - Programs the Xframe mac address + * s2io_set_mac_addr - Programs the Xframe mac address * @dev : pointer to the device structure. * @addr: a uchar pointer to the new mac address which is to be set. - * Description : This procedure will program the Xframe to receive + * Description : This procedure will program the Xframe to receive * frames with new Mac Address - * Return value: SUCCESS on success and an appropriate (-)ve integer + * Return value: SUCCESS on success and an appropriate (-)ve integer * as defined in errno.h file on failure. */ @@ -3075,10 +3630,10 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr) register u64 val64, mac_addr = 0; int i; - /* + /* * Set the new MAC address as the new unicast filter and reflect this * change on the device address registered with the OS. It will be - * at offset 0. + * at offset 0. */ for (i = 0; i < ETH_ALEN; i++) { mac_addr <<= 8; @@ -3102,12 +3657,12 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr) } /** - * s2io_ethtool_sset - Sets different link parameters. + * s2io_ethtool_sset - Sets different link parameters. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @info: pointer to the structure with parameters given by ethtool to set * link information. * Description: - * The function sets different link parameters provided by the user onto + * The function sets different link parameters provided by the user onto * the NIC. * Return value: * 0 on success. @@ -3129,7 +3684,7 @@ static int s2io_ethtool_sset(struct net_device *dev, } /** - * s2io_ethtol_gset - Return link specific information. + * s2io_ethtol_gset - Return link specific information. * @sp : private member of the device structure, pointer to the * s2io_nic structure. * @info : pointer to the structure with parameters given by ethtool @@ -3161,8 +3716,8 @@ static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info) } /** - * s2io_ethtool_gdrvinfo - Returns driver specific information. - * @sp : private member of the device structure, which is a pointer to the + * s2io_ethtool_gdrvinfo - Returns driver specific information. + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @info : pointer to the structure with parameters given by ethtool to * return driver information. @@ -3190,9 +3745,9 @@ static void s2io_ethtool_gdrvinfo(struct net_device *dev, /** * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer. - * @sp: private member of the device structure, which is a pointer to the + * @sp: private member of the device structure, which is a pointer to the * s2io_nic structure. - * @regs : pointer to the structure with parameters given by ethtool for + * @regs : pointer to the structure with parameters given by ethtool for * dumping the registers. * @reg_space: The input argumnet into which all the registers are dumped. * Description: @@ -3221,11 +3776,11 @@ static void s2io_ethtool_gregs(struct net_device *dev, /** * s2io_phy_id - timer function that alternates adapter LED. - * @data : address of the private member of the device structure, which + * @data : address of the private member of the device structure, which * is a pointer to the s2io_nic structure, provided as an u32. - * Description: This is actually the timer function that alternates the - * adapter LED bit of the adapter control bit to set/reset every time on - * invocation. The timer is set for 1/2 a second, hence tha NIC blinks + * Description: This is actually the timer function that alternates the + * adapter LED bit of the adapter control bit to set/reset every time on + * invocation. The timer is set for 1/2 a second, hence tha NIC blinks * once every second. */ static void s2io_phy_id(unsigned long data) @@ -3236,7 +3791,8 @@ static void s2io_phy_id(unsigned long data) u16 subid; subid = sp->pdev->subsystem_device; - if ((subid & 0xFF) >= 0x07) { + if ((sp->device_type == XFRAME_II_DEVICE) || + ((subid & 0xFF) >= 0x07)) { val64 = readq(&bar0->gpio_control); val64 ^= GPIO_CTRL_GPIO_0; writeq(val64, &bar0->gpio_control); @@ -3253,12 +3809,12 @@ static void s2io_phy_id(unsigned long data) * s2io_ethtool_idnic - To physically identify the nic on the system. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @id : pointer to the structure with identification parameters given by + * @id : pointer to the structure with identification parameters given by * ethtool. * Description: Used to physically identify the NIC on the system. - * The Link LED will blink for a time specified by the user for + * The Link LED will blink for a time specified by the user for * identification. - * NOTE: The Link has to be Up to be able to blink the LED. Hence + * NOTE: The Link has to be Up to be able to blink the LED. Hence * identification is possible only if it's link is up. * Return value: * int , returns 0 on success @@ -3273,7 +3829,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data) subid = sp->pdev->subsystem_device; last_gpio_ctrl_val = readq(&bar0->gpio_control); - if ((subid & 0xFF) < 0x07) { + if ((sp->device_type == XFRAME_I_DEVICE) && + ((subid & 0xFF) < 0x07)) { val64 = readq(&bar0->adapter_control); if (!(val64 & ADAPTER_CNTL_EN)) { printk(KERN_ERR @@ -3288,12 +3845,12 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data) } mod_timer(&sp->id_timer, jiffies); if (data) - msleep(data * 1000); + msleep_interruptible(data * HZ); else - msleep(0xFFFFFFFF); + msleep_interruptible(MAX_FLICKER_TIME); del_timer_sync(&sp->id_timer); - if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) { + if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) { writeq(last_gpio_ctrl_val, &bar0->gpio_control); last_gpio_ctrl_val = readq(&bar0->gpio_control); } @@ -3303,7 +3860,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data) /** * s2io_ethtool_getpause_data -Pause frame frame generation and reception. - * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. + * @sp : private member of the device structure, which is a pointer to the + * s2io_nic structure. * @ep : pointer to the structure with pause parameters given by ethtool. * Description: * Returns the Pause frame generation and reception capability of the NIC. @@ -3327,7 +3885,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, /** * s2io_ethtool_setpause_data - set/reset pause frame generation. - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @ep : pointer to the structure with pause parameters given by ethtool. * Description: @@ -3338,7 +3896,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, */ static int s2io_ethtool_setpause_data(struct net_device *dev, - struct ethtool_pauseparam *ep) + struct ethtool_pauseparam *ep) { u64 val64; nic_t *sp = dev->priv; @@ -3359,13 +3917,13 @@ static int s2io_ethtool_setpause_data(struct net_device *dev, /** * read_eeprom - reads 4 bytes of data from user given offset. - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @off : offset at which the data must be written * @data : Its an output parameter where the data read at the given - * offset is stored. + * offset is stored. * Description: - * Will read 4 bytes of data from the user given offset and return the + * Will read 4 bytes of data from the user given offset and return the * read data. * NOTE: Will allow to read only part of the EEPROM visible through the * I2C bus. @@ -3406,7 +3964,7 @@ static int read_eeprom(nic_t * sp, int off, u32 * data) * s2io_nic structure. * @off : offset at which the data must be written * @data : The data that is to be written - * @cnt : Number of bytes of the data that are actually to be written into + * @cnt : Number of bytes of the data that are actually to be written into * the Eeprom. (max of 3) * Description: * Actually writes the relevant part of the data value into the Eeprom @@ -3443,7 +4001,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) /** * s2io_ethtool_geeprom - reads the value stored in the Eeprom. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @eeprom : pointer to the user level structure provided by ethtool, + * @eeprom : pointer to the user level structure provided by ethtool, * containing all relevant information. * @data_buf : user defined value to be written into Eeprom. * Description: Reads the values stored in the Eeprom at given offset @@ -3454,7 +4012,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt) */ static int s2io_ethtool_geeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 * data_buf) + struct ethtool_eeprom *eeprom, u8 * data_buf) { u32 data, i, valid; nic_t *sp = dev->priv; @@ -3479,7 +4037,7 @@ static int s2io_ethtool_geeprom(struct net_device *dev, * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @eeprom : pointer to the user level structure provided by ethtool, + * @eeprom : pointer to the user level structure provided by ethtool, * containing all relevant information. * @data_buf ; user defined value to be written into Eeprom. * Description: @@ -3527,8 +4085,8 @@ static int s2io_ethtool_seeprom(struct net_device *dev, } /** - * s2io_register_test - reads and writes into all clock domains. - * @sp : private member of the device structure, which is a pointer to the + * s2io_register_test - reads and writes into all clock domains. + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @data : variable that returns the result of each of the test conducted b * by the driver. @@ -3545,8 +4103,8 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) u64 val64 = 0; int fail = 0; - val64 = readq(&bar0->pcc_enable); - if (val64 != 0xff00000000000000ULL) { + val64 = readq(&bar0->pif_rd_swapper_fb); + if (val64 != 0x123456789abcdefULL) { fail = 1; DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n"); } @@ -3590,13 +4148,13 @@ static int s2io_register_test(nic_t * sp, uint64_t * data) } /** - * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. + * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * @data:variable that returns the result of each of the test conducted by * the driver. * Description: - * Verify that EEPROM in the xena can be programmed using I2C_CONTROL + * Verify that EEPROM in the xena can be programmed using I2C_CONTROL * register. * Return value: * 0 on success. @@ -3661,14 +4219,14 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data) /** * s2io_bist_test - invokes the MemBist test of the card . - * @sp : private member of the device structure, which is a pointer to the + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. - * @data:variable that returns the result of each of the test conducted by + * @data:variable that returns the result of each of the test conducted by * the driver. * Description: * This invokes the MemBist test of the card. We give around * 2 secs time for the Test to complete. If it's still not complete - * within this peiod, we consider that the test failed. + * within this peiod, we consider that the test failed. * Return value: * 0 on success and -1 on failure. */ @@ -3697,13 +4255,13 @@ static int s2io_bist_test(nic_t * sp, uint64_t * data) } /** - * s2io-link_test - verifies the link state of the nic - * @sp ; private member of the device structure, which is a pointer to the + * s2io-link_test - verifies the link state of the nic + * @sp ; private member of the device structure, which is a pointer to the * s2io_nic structure. * @data: variable that returns the result of each of the test conducted by * the driver. * Description: - * The function verifies the link state of the NIC and updates the input + * The function verifies the link state of the NIC and updates the input * argument 'data' appropriately. * Return value: * 0 on success. @@ -3722,13 +4280,13 @@ static int s2io_link_test(nic_t * sp, uint64_t * data) } /** - * s2io_rldram_test - offline test for access to the RldRam chip on the NIC - * @sp - private member of the device structure, which is a pointer to the + * s2io_rldram_test - offline test for access to the RldRam chip on the NIC + * @sp - private member of the device structure, which is a pointer to the * s2io_nic structure. - * @data - variable that returns the result of each of the test + * @data - variable that returns the result of each of the test * conducted by the driver. * Description: - * This is one of the offline test that tests the read and write + * This is one of the offline test that tests the read and write * access to the RldRam chip on the NIC. * Return value: * 0 on success. @@ -3833,7 +4391,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data) * s2io_nic structure. * @ethtest : pointer to a ethtool command specific structure that will be * returned to the user. - * @data : variable that returns the result of each of the test + * @data : variable that returns the result of each of the test * conducted by the driver. * Description: * This function conducts 6 tests ( 4 offline and 2 online) to determine @@ -3851,23 +4409,18 @@ static void s2io_ethtool_test(struct net_device *dev, if (ethtest->flags == ETH_TEST_FL_OFFLINE) { /* Offline Tests. */ - if (orig_state) { + if (orig_state) s2io_close(sp->dev); - s2io_set_swapper(sp); - } else - s2io_set_swapper(sp); if (s2io_register_test(sp, &data[0])) ethtest->flags |= ETH_TEST_FL_FAILED; s2io_reset(sp); - s2io_set_swapper(sp); if (s2io_rldram_test(sp, &data[3])) ethtest->flags |= ETH_TEST_FL_FAILED; s2io_reset(sp); - s2io_set_swapper(sp); if (s2io_eeprom_test(sp, &data[1])) ethtest->flags |= ETH_TEST_FL_FAILED; @@ -3910,61 +4463,111 @@ static void s2io_get_ethtool_stats(struct net_device *dev, nic_t *sp = dev->priv; StatInfo_t *stat_info = sp->mac_control.stats_info; - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_data_octets); + s2io_updt_stats(sp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 | + le32_to_cpu(stat_info->tmac_data_octets); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_mcst_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_bcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_mcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_bcst_frms); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_any_err_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 | + le32_to_cpu(stat_info->tmac_any_err_frms); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_vld_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_drop_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_icmp); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_rst_tcp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 | + le32_to_cpu(stat_info->tmac_vld_ip); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 | + le32_to_cpu(stat_info->tmac_drop_ip); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 | + le32_to_cpu(stat_info->tmac_icmp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 | + le32_to_cpu(stat_info->tmac_rst_tcp); tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp); - tmp_stats[i++] = le32_to_cpu(stat_info->tmac_udp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_data_octets); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 | + le32_to_cpu(stat_info->tmac_udp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_vld_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 | + le32_to_cpu(stat_info->rmac_data_octets); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_mcst_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_bcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_vld_mcst_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_vld_bcst_frms); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_discarded_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_usized_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_osized_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_frag_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_jabber_frms); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ip); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_discarded_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_usized_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_osized_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_frag_frms); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 | + le32_to_cpu(stat_info->rmac_jabber_frms); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 | + le32_to_cpu(stat_info->rmac_ip); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_drop_ip); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_icmp); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 | + le32_to_cpu(stat_info->rmac_drop_ip); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 | + le32_to_cpu(stat_info->rmac_icmp); tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_udp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_drp_udp); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pause_cnt); - tmp_stats[i++] = le32_to_cpu(stat_info->rmac_accepted_ip); + tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 | + le32_to_cpu(stat_info->rmac_udp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 | + le32_to_cpu(stat_info->rmac_err_drp_udp); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 | + le32_to_cpu(stat_info->rmac_pause_cnt); + tmp_stats[i++] = + (u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 | + le32_to_cpu(stat_info->rmac_accepted_ip); tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp); + tmp_stats[i++] = 0; + tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs; + tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs; } -static int s2io_ethtool_get_regs_len(struct net_device *dev) +int s2io_ethtool_get_regs_len(struct net_device *dev) { return (XENA_REG_SPACE); } -static u32 s2io_ethtool_get_rx_csum(struct net_device * dev) +u32 s2io_ethtool_get_rx_csum(struct net_device * dev) { nic_t *sp = dev->priv; return (sp->rx_csum); } - -static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data) +int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data) { nic_t *sp = dev->priv; @@ -3975,19 +4578,17 @@ static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data) return 0; } - -static int s2io_get_eeprom_len(struct net_device *dev) +int s2io_get_eeprom_len(struct net_device *dev) { return (XENA_EEPROM_SPACE); } -static int s2io_ethtool_self_test_count(struct net_device *dev) +int s2io_ethtool_self_test_count(struct net_device *dev) { return (S2IO_TEST_LEN); } - -static void s2io_ethtool_get_strings(struct net_device *dev, - u32 stringset, u8 * data) +void s2io_ethtool_get_strings(struct net_device *dev, + u32 stringset, u8 * data) { switch (stringset) { case ETH_SS_TEST: @@ -3998,13 +4599,12 @@ static void s2io_ethtool_get_strings(struct net_device *dev, sizeof(ethtool_stats_keys)); } } - static int s2io_ethtool_get_stats_count(struct net_device *dev) { return (S2IO_STAT_LEN); } -static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data) +int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data) { if (data) dev->features |= NETIF_F_IP_CSUM; @@ -4046,21 +4646,18 @@ static struct ethtool_ops netdev_ethtool_ops = { }; /** - * s2io_ioctl - Entry point for the Ioctl + * s2io_ioctl - Entry point for the Ioctl * @dev : Device pointer. * @ifr : An IOCTL specefic structure, that can contain a pointer to * a proprietary structure used to pass information to the driver. * @cmd : This is used to distinguish between the different commands that * can be passed to the IOCTL functions. * Description: - * This function has support for ethtool, adding multiple MAC addresses on - * the NIC and some DBG commands for the util tool. - * Return value: - * Currently the IOCTL supports no operations, hence by default this - * function returns OP NOT SUPPORTED value. + * Currently there are no special functionality supported in IOCTL, hence + * function always return EOPNOTSUPPORTED */ -static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { return -EOPNOTSUPP; } @@ -4076,17 +4673,9 @@ static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) * file on failure. */ -static int s2io_change_mtu(struct net_device *dev, int new_mtu) +int s2io_change_mtu(struct net_device *dev, int new_mtu) { nic_t *sp = dev->priv; - XENA_dev_config_t __iomem *bar0 = sp->bar0; - register u64 val64; - - if (netif_running(dev)) { - DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name); - DBG_PRINT(ERR_DBG, "change its MTU \n"); - return -EBUSY; - } if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) { DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", @@ -4094,11 +4683,22 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) return -EPERM; } - /* Set the new MTU into the PYLD register of the NIC */ - val64 = new_mtu; - writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); - dev->mtu = new_mtu; + if (netif_running(dev)) { + s2io_card_down(sp); + netif_stop_queue(dev); + if (s2io_card_up(sp)) { + DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", + __FUNCTION__); + } + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + } else { /* Device is down */ + XENA_dev_config_t __iomem *bar0 = sp->bar0; + u64 val64 = new_mtu; + + writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len); + } return 0; } @@ -4108,9 +4708,9 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu) * @dev_adr : address of the device structure in dma_addr_t format. * Description: * This is the tasklet or the bottom half of the ISR. This is - * an extension of the ISR which is scheduled by the scheduler to be run + * an extension of the ISR which is scheduled by the scheduler to be run * when the load on the CPU is low. All low priority tasks of the ISR can - * be pushed into the tasklet. For now the tasklet is used only to + * be pushed into the tasklet. For now the tasklet is used only to * replenish the Rx buffers in the Rx buffer descriptors. * Return value: * void. @@ -4166,19 +4766,22 @@ static void s2io_set_link(unsigned long data) } subid = nic->pdev->subsystem_device; - /* - * Allow a small delay for the NICs self initiated - * cleanup to complete. - */ - msleep(100); + if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) { + /* + * Allow a small delay for the NICs self initiated + * cleanup to complete. + */ + msleep(100); + } val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(val64, nic->device_enabled_once)) { + if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) { if (LINK_IS_UP(val64)) { val64 = readq(&bar0->adapter_control); val64 |= ADAPTER_CNTL_EN; writeq(val64, &bar0->adapter_control); - if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) { + if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, + subid)) { val64 = readq(&bar0->gpio_control); val64 |= GPIO_CTRL_GPIO_0; writeq(val64, &bar0->gpio_control); @@ -4187,20 +4790,24 @@ static void s2io_set_link(unsigned long data) val64 |= ADAPTER_LED_ON; writeq(val64, &bar0->adapter_control); } - val64 = readq(&bar0->adapter_status); - if (!LINK_IS_UP(val64)) { - DBG_PRINT(ERR_DBG, "%s:", dev->name); - DBG_PRINT(ERR_DBG, " Link down"); - DBG_PRINT(ERR_DBG, "after "); - DBG_PRINT(ERR_DBG, "enabling "); - DBG_PRINT(ERR_DBG, "device \n"); + if (s2io_link_fault_indication(nic) == + MAC_RMAC_ERR_TIMER) { + val64 = readq(&bar0->adapter_status); + if (!LINK_IS_UP(val64)) { + DBG_PRINT(ERR_DBG, "%s:", dev->name); + DBG_PRINT(ERR_DBG, " Link down"); + DBG_PRINT(ERR_DBG, "after "); + DBG_PRINT(ERR_DBG, "enabling "); + DBG_PRINT(ERR_DBG, "device \n"); + } } if (nic->device_enabled_once == FALSE) { nic->device_enabled_once = TRUE; } s2io_link(nic, LINK_UP); } else { - if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) { + if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type, + subid)) { val64 = readq(&bar0->gpio_control); val64 &= ~GPIO_CTRL_GPIO_0; writeq(val64, &bar0->gpio_control); @@ -4223,9 +4830,11 @@ static void s2io_card_down(nic_t * sp) unsigned long flags; register u64 val64 = 0; + del_timer_sync(&sp->alarm_timer); /* If s2io_set_link task is executing, wait till it completes. */ - while (test_and_set_bit(0, &(sp->link_state))) + while (test_and_set_bit(0, &(sp->link_state))) { msleep(50); + } atomic_set(&sp->card_state, CARD_DOWN); /* disable Tx and Rx traffic on the NIC */ @@ -4237,7 +4846,7 @@ static void s2io_card_down(nic_t * sp) /* Check if the device is Quiescent and then Reset the NIC */ do { val64 = readq(&bar0->adapter_status); - if (verify_xena_quiescence(val64, sp->device_enabled_once)) { + if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) { break; } @@ -4251,14 +4860,27 @@ static void s2io_card_down(nic_t * sp) break; } } while (1); - spin_lock_irqsave(&sp->tx_lock, flags); s2io_reset(sp); - /* Free all unused Tx and Rx buffers */ + /* Waiting till all Interrupt handlers are complete */ + cnt = 0; + do { + msleep(10); + if (!atomic_read(&sp->isr_cnt)) + break; + cnt++; + } while(cnt < 5); + + spin_lock_irqsave(&sp->tx_lock, flags); + /* Free all Tx buffers */ free_tx_buffers(sp); + spin_unlock_irqrestore(&sp->tx_lock, flags); + + /* Free all Rx buffers */ + spin_lock_irqsave(&sp->rx_lock, flags); free_rx_buffers(sp); + spin_unlock_irqrestore(&sp->rx_lock, flags); - spin_unlock_irqrestore(&sp->tx_lock, flags); clear_bit(0, &(sp->link_state)); } @@ -4276,8 +4898,8 @@ static int s2io_card_up(nic_t * sp) return -ENODEV; } - /* - * Initializing the Rx buffers. For now we are considering only 1 + /* + * Initializing the Rx buffers. For now we are considering only 1 * Rx ring and initializing buffers into 30 Rx blocks */ mac_control = &sp->mac_control; @@ -4311,16 +4933,18 @@ static int s2io_card_up(nic_t * sp) return -ENODEV; } + S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2)); + atomic_set(&sp->card_state, CARD_UP); return 0; } -/** +/** * s2io_restart_nic - Resets the NIC. * @data : long pointer to the device private structure * Description: * This function is scheduled to be run by the s2io_tx_watchdog - * function after 0.5 secs to reset the NIC. The idea is to reduce + * function after 0.5 secs to reset the NIC. The idea is to reduce * the run time of the watch dog routine which is run holding a * spin lock. */ @@ -4338,10 +4962,11 @@ static void s2io_restart_nic(unsigned long data) netif_wake_queue(dev); DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name); + } -/** - * s2io_tx_watchdog - Watchdog for transmit side. +/** + * s2io_tx_watchdog - Watchdog for transmit side. * @dev : Pointer to net device structure * Description: * This function is triggered if the Tx Queue is stopped @@ -4369,7 +4994,7 @@ static void s2io_tx_watchdog(struct net_device *dev) * @len : length of the packet * @cksum : FCS checksum of the frame. * @ring_no : the ring from which this RxD was extracted. - * Description: + * Description: * This function is called by the Tx interrupt serivce routine to perform * some OS related operations on the SKB before passing it to the upper * layers. It mainly checks if the checksum is OK, if so adds it to the @@ -4379,35 +5004,68 @@ static void s2io_tx_watchdog(struct net_device *dev) * Return value: * SUCCESS on success and -1 on failure. */ -#ifndef CONFIG_2BUFF_MODE -static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no) -#else -static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, - buffAdd_t * ba) -#endif +static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp) { + nic_t *sp = ring_data->nic; struct net_device *dev = (struct net_device *) sp->dev; - struct sk_buff *skb = - (struct sk_buff *) ((unsigned long) rxdp->Host_Control); + struct sk_buff *skb = (struct sk_buff *) + ((unsigned long) rxdp->Host_Control); + int ring_no = ring_data->ring_no; u16 l3_csum, l4_csum; #ifdef CONFIG_2BUFF_MODE - int buf0_len, buf2_len; + int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); + int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2); + int get_block = ring_data->rx_curr_get_info.block_index; + int get_off = ring_data->rx_curr_get_info.offset; + buffAdd_t *ba = &ring_data->ba[get_block][get_off]; unsigned char *buff; +#else + u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);; #endif + skb->dev = dev; + if (rxdp->Control_1 & RXD_T_CODE) { + unsigned long long err = rxdp->Control_1 & RXD_T_CODE; + DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n", + dev->name, err); + dev_kfree_skb(skb); + sp->stats.rx_crc_errors++; + atomic_dec(&sp->rx_bufs_left[ring_no]); + rxdp->Host_Control = 0; + return 0; + } - l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1); - if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && (sp->rx_csum)) { + /* Updating statistics */ + rxdp->Host_Control = 0; + sp->rx_pkt_count++; + sp->stats.rx_packets++; +#ifndef CONFIG_2BUFF_MODE + sp->stats.rx_bytes += len; +#else + sp->stats.rx_bytes += buf0_len + buf2_len; +#endif + +#ifndef CONFIG_2BUFF_MODE + skb_put(skb, len); +#else + buff = skb_push(skb, buf0_len); + memcpy(buff, ba->ba_0, buf0_len); + skb_put(skb, buf2_len); +#endif + + if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && + (sp->rx_csum)) { + l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1); l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1); if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) { - /* + /* * NIC verifies if the Checksum of the received * frame is Ok or not and accordingly returns * a flag in the RxD. */ skb->ip_summed = CHECKSUM_UNNECESSARY; } else { - /* - * Packet with erroneous checksum, let the + /* + * Packet with erroneous checksum, let the * upper layers deal with it. */ skb->ip_summed = CHECKSUM_NONE; @@ -4416,44 +5074,26 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, skb->ip_summed = CHECKSUM_NONE; } - if (rxdp->Control_1 & RXD_T_CODE) { - unsigned long long err = rxdp->Control_1 & RXD_T_CODE; - DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n", - dev->name, err); - } -#ifdef CONFIG_2BUFF_MODE - buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2); - buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2); -#endif - - skb->dev = dev; -#ifndef CONFIG_2BUFF_MODE - skb_put(skb, len); - skb->protocol = eth_type_trans(skb, dev); -#else - buff = skb_push(skb, buf0_len); - memcpy(buff, ba->ba_0, buf0_len); - skb_put(skb, buf2_len); skb->protocol = eth_type_trans(skb, dev); -#endif - #ifdef CONFIG_S2IO_NAPI - netif_receive_skb(skb); + if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) { + /* Queueing the vlan frame to the upper layer */ + vlan_hwaccel_receive_skb(skb, sp->vlgrp, + RXD_GET_VLAN_TAG(rxdp->Control_2)); + } else { + netif_receive_skb(skb); + } #else - netif_rx(skb); + if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) { + /* Queueing the vlan frame to the upper layer */ + vlan_hwaccel_rx(skb, sp->vlgrp, + RXD_GET_VLAN_TAG(rxdp->Control_2)); + } else { + netif_rx(skb); + } #endif - dev->last_rx = jiffies; - sp->rx_pkt_count++; - sp->stats.rx_packets++; -#ifndef CONFIG_2BUFF_MODE - sp->stats.rx_bytes += len; -#else - sp->stats.rx_bytes += buf0_len + buf2_len; -#endif - atomic_dec(&sp->rx_bufs_left[ring_no]); - rxdp->Host_Control = 0; return SUCCESS; } @@ -4464,13 +5104,13 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no, * @link : inidicates whether link is UP/DOWN. * Description: * This function stops/starts the Tx queue depending on whether the link - * status of the NIC is is down or up. This is called by the Alarm - * interrupt handler whenever a link change interrupt comes up. + * status of the NIC is is down or up. This is called by the Alarm + * interrupt handler whenever a link change interrupt comes up. * Return value: * void. */ -static void s2io_link(nic_t * sp, int link) +void s2io_link(nic_t * sp, int link) { struct net_device *dev = (struct net_device *) sp->dev; @@ -4487,8 +5127,25 @@ static void s2io_link(nic_t * sp, int link) } /** - * s2io_init_pci -Initialization of PCI and PCI-X configuration registers . - * @sp : private member of the device structure, which is a pointer to the + * get_xena_rev_id - to identify revision ID of xena. + * @pdev : PCI Dev structure + * Description: + * Function to identify the Revision ID of xena. + * Return value: + * returns the revision ID of the device. + */ + +int get_xena_rev_id(struct pci_dev *pdev) +{ + u8 id = 0; + int ret; + ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id); + return id; +} + +/** + * s2io_init_pci -Initialization of PCI and PCI-X configuration registers . + * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure. * Description: * This function initializes a few of the PCI and PCI-X configuration registers @@ -4499,15 +5156,15 @@ static void s2io_link(nic_t * sp, int link) static void s2io_init_pci(nic_t * sp) { - u16 pci_cmd = 0; + u16 pci_cmd = 0, pcix_cmd = 0; /* Enable Data Parity Error Recovery in PCI-X command register. */ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - (sp->pcix_cmd | 1)); + (pcix_cmd | 1)); pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); /* Set the PErr Response bit in PCI command register. */ pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); @@ -4515,53 +5172,43 @@ static void s2io_init_pci(nic_t * sp) (pci_cmd | PCI_COMMAND_PARITY)); pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); - /* Set MMRB count to 1024 in PCI-X Command register. */ - sp->pcix_cmd &= 0xFFF3; - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, (sp->pcix_cmd | (0x1 << 2))); /* MMRBC 1K */ - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); - - /* Setting Maximum outstanding splits based on system type. */ - sp->pcix_cmd &= 0xFF8F; - - sp->pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */ - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - sp->pcix_cmd); - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); /* Forcibly disabling relaxed ordering capability of the card. */ - sp->pcix_cmd &= 0xfffd; + pcix_cmd &= 0xfffd; pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - sp->pcix_cmd); + pcix_cmd); pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(sp->pcix_cmd)); + &(pcix_cmd)); } MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>"); MODULE_LICENSE("GPL"); module_param(tx_fifo_num, int, 0); -module_param_array(tx_fifo_len, int, NULL, 0); module_param(rx_ring_num, int, 0); -module_param_array(rx_ring_sz, int, NULL, 0); -module_param(Stats_refresh_time, int, 0); +module_param_array(tx_fifo_len, uint, NULL, 0); +module_param_array(rx_ring_sz, uint, NULL, 0); +module_param_array(rts_frm_len, uint, NULL, 0); +module_param(use_continuous_tx_intrs, int, 1); module_param(rmac_pause_time, int, 0); module_param(mc_pause_threshold_q0q3, int, 0); module_param(mc_pause_threshold_q4q7, int, 0); module_param(shared_splits, int, 0); module_param(tmac_util_period, int, 0); module_param(rmac_util_period, int, 0); +module_param(bimodal, bool, 0); #ifndef CONFIG_S2IO_NAPI module_param(indicate_max_pkts, int, 0); #endif +module_param(rxsync_frequency, int, 0); + /** - * s2io_init_nic - Initialization of the adapter . + * s2io_init_nic - Initialization of the adapter . * @pdev : structure containing the PCI related information of the device. * @pre: List of PCI devices supported by the driver listed in s2io_tbl. * Description: * The function initializes an adapter identified by the pci_dec structure. - * All OS related initialization including memory and device structure and - * initlaization of the device private variable is done. Also the swapper - * control register is initialized to enable read and write into the I/O + * All OS related initialization including memory and device structure and + * initlaization of the device private variable is done. Also the swapper + * control register is initialized to enable read and write into the I/O * registers of the device. * Return value: * returns 0 on success and negative on failure. @@ -4572,7 +5219,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) { nic_t *sp; struct net_device *dev; - char *dev_name = "S2IO 10GE NIC"; int i, j, ret; int dma_flag = FALSE; u32 mac_up, mac_down; @@ -4581,10 +5227,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) u16 subid; mac_info_t *mac_control; struct config_param *config; + int mode; - - DBG_PRINT(ERR_DBG, "Loading S2IO driver with %s\n", - s2io_driver_version); +#ifdef CONFIG_S2IO_NAPI + DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n"); +#endif if ((ret = pci_enable_device(pdev))) { DBG_PRINT(ERR_DBG, @@ -4595,7 +5242,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n"); dma_flag = TRUE; - if (pci_set_consistent_dma_mask (pdev, DMA_64BIT_MASK)) { DBG_PRINT(ERR_DBG, @@ -4635,34 +5281,41 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) memset(sp, 0, sizeof(nic_t)); sp->dev = dev; sp->pdev = pdev; - sp->vendor_id = pdev->vendor; - sp->device_id = pdev->device; sp->high_dma_flag = dma_flag; - sp->irq = pdev->irq; sp->device_enabled_once = FALSE; - strcpy(sp->name, dev_name); + + if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) || + (pdev->device == PCI_DEVICE_ID_HERC_UNI)) + sp->device_type = XFRAME_II_DEVICE; + else + sp->device_type = XFRAME_I_DEVICE; /* Initialize some PCI/PCI-X fields of the NIC. */ s2io_init_pci(sp); - /* + /* * Setting the device configuration parameters. - * Most of these parameters can be specified by the user during - * module insertion as they are module loadable parameters. If - * these parameters are not not specified during load time, they + * Most of these parameters can be specified by the user during + * module insertion as they are module loadable parameters. If + * these parameters are not not specified during load time, they * are initialized with default values. */ mac_control = &sp->mac_control; config = &sp->config; /* Tx side parameters. */ - tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */ + if (tx_fifo_len[0] == 0) + tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */ config->tx_fifo_num = tx_fifo_num; for (i = 0; i < MAX_TX_FIFOS; i++) { config->tx_cfg[i].fifo_len = tx_fifo_len[i]; config->tx_cfg[i].fifo_priority = i; } + /* mapping the QoS priority to the configured fifos */ + for (i = 0; i < MAX_TX_FIFOS; i++) + config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i]; + config->tx_intr_type = TXD_INT_TYPE_UTILZ; for (i = 0; i < config->tx_fifo_num; i++) { config->tx_cfg[i].f_no_snoop = @@ -4675,7 +5328,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) config->max_txds = MAX_SKB_FRAGS; /* Rx side parameters. */ - rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */ + if (rx_ring_sz[0] == 0) + rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */ config->rx_ring_num = rx_ring_num; for (i = 0; i < MAX_RX_RINGS; i++) { config->rx_cfg[i].num_rxd = rx_ring_sz[i] * @@ -4699,10 +5353,13 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) for (i = 0; i < config->rx_ring_num; i++) atomic_set(&sp->rx_bufs_left[i], 0); + /* Initialize the number of ISRs currently running */ + atomic_set(&sp->isr_cnt, 0); + /* initialize the shared memory used by the NIC and the host */ if (init_shared_mem(sp)) { DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", - dev->name); + __FUNCTION__); ret = -ENOMEM; goto mem_alloc_failed; } @@ -4743,13 +5400,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) dev->do_ioctl = &s2io_ioctl; dev->change_mtu = &s2io_change_mtu; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = s2io_vlan_rx_register; + dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid; + /* * will use eth_mac_addr() for dev->set_mac_address * mac address will be set every time dev->open() is called */ -#ifdef CONFIG_S2IO_NAPI +#if defined(CONFIG_S2IO_NAPI) dev->poll = s2io_poll; - dev->weight = 90; + dev->weight = 32; #endif dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; @@ -4776,22 +5437,28 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto set_swap_failed; } - /* Fix for all "FFs" MAC address problems observed on Alpha platforms */ - fix_mac_address(sp); - s2io_reset(sp); + /* Verify if the Herc works on the slot its placed into */ + if (sp->device_type & XFRAME_II_DEVICE) { + mode = s2io_verify_pci_mode(sp); + if (mode < 0) { + DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__); + DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n"); + ret = -EBADSLT; + goto set_swap_failed; + } + } - /* - * Setting swapper control on the NIC, so the MAC address can be read. - */ - if (s2io_set_swapper(sp)) { - DBG_PRINT(ERR_DBG, - "%s: S2IO: swapper settings are wrong\n", - dev->name); - ret = -EAGAIN; - goto set_swap_failed; + /* Not needed for Herc */ + if (sp->device_type & XFRAME_I_DEVICE) { + /* + * Fix for all "FFs" MAC address problems observed on + * Alpha platforms + */ + fix_mac_address(sp); + s2io_reset(sp); } - /* + /* * MAC address initialization. * For now only one mac address will be read and used. */ @@ -4814,37 +5481,28 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16); sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24); - DBG_PRINT(INIT_DBG, - "DEFAULT MAC ADDR:0x%02x-%02x-%02x-%02x-%02x-%02x\n", - sp->def_mac_addr[0].mac_addr[0], - sp->def_mac_addr[0].mac_addr[1], - sp->def_mac_addr[0].mac_addr[2], - sp->def_mac_addr[0].mac_addr[3], - sp->def_mac_addr[0].mac_addr[4], - sp->def_mac_addr[0].mac_addr[5]); - /* Set the factory defined MAC address initially */ dev->addr_len = ETH_ALEN; memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN); /* - * Initialize the tasklet status and link state flags - * and the card statte parameter + * Initialize the tasklet status and link state flags + * and the card state parameter */ atomic_set(&(sp->card_state), 0); sp->tasklet_status = 0; sp->link_state = 0; - /* Initialize spinlocks */ spin_lock_init(&sp->tx_lock); #ifndef CONFIG_S2IO_NAPI spin_lock_init(&sp->put_lock); #endif + spin_lock_init(&sp->rx_lock); - /* - * SXE-002: Configure link and activity LED to init state - * on driver load. + /* + * SXE-002: Configure link and activity LED to init state + * on driver load. */ subid = sp->pdev->subsystem_device; if ((subid & 0xFF) >= 0x07) { @@ -4864,13 +5522,61 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) goto register_failed; } - /* - * Make Link state as off at this point, when the Link change - * interrupt comes the state will be automatically changed to + if (sp->device_type & XFRAME_II_DEVICE) { + DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ", + dev->name); + DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + get_xena_rev_id(sp->pdev), + s2io_driver_version); + DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", + sp->def_mac_addr[0].mac_addr[0], + sp->def_mac_addr[0].mac_addr[1], + sp->def_mac_addr[0].mac_addr[2], + sp->def_mac_addr[0].mac_addr[3], + sp->def_mac_addr[0].mac_addr[4], + sp->def_mac_addr[0].mac_addr[5]); + mode = s2io_print_pci_mode(sp); + if (mode < 0) { + DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode "); + ret = -EBADSLT; + goto set_swap_failed; + } + } else { + DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ", + dev->name); + DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n", + get_xena_rev_id(sp->pdev), + s2io_driver_version); + DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n", + sp->def_mac_addr[0].mac_addr[0], + sp->def_mac_addr[0].mac_addr[1], + sp->def_mac_addr[0].mac_addr[2], + sp->def_mac_addr[0].mac_addr[3], + sp->def_mac_addr[0].mac_addr[4], + sp->def_mac_addr[0].mac_addr[5]); + } + + /* Initialize device name */ + strcpy(sp->name, dev->name); + if (sp->device_type & XFRAME_II_DEVICE) + strcat(sp->name, ": Neterion Xframe II 10GbE adapter"); + else + strcat(sp->name, ": Neterion Xframe I 10GbE adapter"); + + /* Initialize bimodal Interrupts */ + sp->config.bimodal = bimodal; + if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) { + sp->config.bimodal = 0; + DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n", + dev->name); + } + + /* + * Make Link state as off at this point, when the Link change + * interrupt comes the state will be automatically changed to * the right state. */ netif_carrier_off(dev); - sp->last_link_state = LINK_DOWN; return 0; @@ -4891,11 +5597,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } /** - * s2io_rem_nic - Free the PCI device + * s2io_rem_nic - Free the PCI device * @pdev: structure containing the PCI related information of the device. - * Description: This function is called by the Pci subsystem to release a + * Description: This function is called by the Pci subsystem to release a * PCI device and free up all resource held up by the device. This could - * be in response to a Hot plug event or when the driver is to be removed + * be in response to a Hot plug event or when the driver is to be removed * from memory. */ @@ -4919,7 +5625,6 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev) pci_disable_device(pdev); pci_release_regions(pdev); pci_set_drvdata(pdev, NULL); - free_netdev(dev); } @@ -4935,11 +5640,11 @@ int __init s2io_starter(void) } /** - * s2io_closer - Cleanup routine for the driver + * s2io_closer - Cleanup routine for the driver * Description: This function is the cleanup routine for the driver. It unregist * ers the driver. */ -static void s2io_closer(void) +void s2io_closer(void) { pci_unregister_driver(&s2io_driver); DBG_PRINT(INIT_DBG, "cleanup done\n"); |
