4 files changed, 31 insertions, 7 deletions

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index b5a8f750e433..82104edca393 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -879,6 +879,8 @@ static int m88e1510_config_init(struct phy_device *phydev)
 
 	/* SGMII-to-Copper mode initialization */
 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+		u32 pause;
+
 		/* Select page 18 */
 		err = marvell_set_page(phydev, 18);
 		if (err < 0)
@@ -902,6 +904,16 @@ static int m88e1510_config_init(struct phy_device *phydev)
 		err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
 		if (err < 0)
 			return err;
+
+		/* There appears to be a bug in the 88e1512 when used in
+		 * SGMII to copper mode, where the AN advertisment register
+		 * clears the pause bits each time a negotiation occurs.
+		 * This means we can never be truely sure what was advertised,
+		 * so disable Pause support.
+		 */
+		pause = SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+		phydev->supported &= ~pause;
+		phydev->advertising &= ~pause;
 	}
 
 	return m88e1121_config_init(phydev);
@@ -2073,7 +2085,7 @@ static struct phy_driver marvell_drivers[] = {
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1145_config_init,
-		.config_aneg = &marvell_config_aneg,
+		.config_aneg = &m88e1101_config_aneg,
 		.read_status = &genphy_read_status,
 		.ack_interrupt = &marvell_ack_interrupt,
 		.config_intr = &marvell_config_intr,
diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c
index bfd3090fb055..07c6048200c6 100644
--- a/drivers/net/phy/mdio-xgene.c
+++ b/drivers/net/phy/mdio-xgene.c
@@ -194,8 +194,11 @@ static int xgene_mdio_reset(struct xgene_mdio_pdata *pdata)
 	}
 
 	ret = xgene_enet_ecc_init(pdata);
-	if (ret)
+	if (ret) {
+		if (pdata->dev->of_node)
+			clk_disable_unprepare(pdata->clk);
 		return ret;
+	}
 	xgene_gmac_reset(pdata);
 
 	return 0;
@@ -388,8 +391,10 @@ static int xgene_mdio_probe(struct platform_device *pdev)
 		return ret;
 
 	mdio_bus = mdiobus_alloc();
-	if (!mdio_bus)
-		return -ENOMEM;
+	if (!mdio_bus) {
+		ret = -ENOMEM;
+		goto out_clk;
+	}
 
 	mdio_bus->name = "APM X-Gene MDIO bus";
 
@@ -418,7 +423,7 @@ static int xgene_mdio_probe(struct platform_device *pdev)
 		mdio_bus->phy_mask = ~0;
 		ret = mdiobus_register(mdio_bus);
 		if (ret)
-			goto out;
+			goto out_mdiobus;
 
 		acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_HANDLE(dev), 1,
 				    acpi_register_phy, NULL, mdio_bus, NULL);
@@ -426,16 +431,20 @@ static int xgene_mdio_probe(struct platform_device *pdev)
 	}
 
 	if (ret)
-		goto out;
+		goto out_mdiobus;
 
 	pdata->mdio_bus = mdio_bus;
 	xgene_mdio_status = true;
 
 	return 0;
 
-out:
+out_mdiobus:
 	mdiobus_free(mdio_bus);
 
+out_clk:
+	if (dev->of_node)
+		clk_disable_unprepare(pdata->clk);
+
 	return ret;
 }
 
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index ab4614113403..422ff6333c52 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -624,6 +624,7 @@ static int ksz9031_read_status(struct phy_device *phydev)
 		phydev->link = 0;
 		if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev))
 			phydev->drv->config_intr(phydev);
+		return genphy_config_aneg(phydev);
 	}
 
 	return 0;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5dc9668dde34..827f3f92560e 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -526,6 +526,7 @@ struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
 	pl->link_config.pause = MLO_PAUSE_AN;
 	pl->link_config.speed = SPEED_UNKNOWN;
 	pl->link_config.duplex = DUPLEX_UNKNOWN;
+	pl->link_config.an_enabled = true;
 	pl->ops = ops;
 	__set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
 
@@ -951,6 +952,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
 	mutex_lock(&pl->state_mutex);
 	/* Configure the MAC to match the new settings */
 	linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising);
+	pl->link_config.interface = config.interface;
 	pl->link_config.speed = our_kset.base.speed;
 	pl->link_config.duplex = our_kset.base.duplex;
 	pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;