diff options
Diffstat (limited to 'drivers/net/phy/marvell.c')
| -rw-r--r-- | drivers/net/phy/marvell.c | 134 |
1 files changed, 79 insertions, 55 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index cbec296107bd..2e12f982534f 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -491,25 +491,26 @@ static int m88e1318_config_aneg(struct phy_device *phydev) } /** - * ethtool_adv_to_fiber_adv_t - * @ethadv: the ethtool advertisement settings + * linkmode_adv_to_fiber_adv_t + * @advertise: the linkmode advertisement settings * - * A small helper function that translates ethtool advertisement - * settings to phy autonegotiation advertisements for the - * MII_ADV register for fiber link. + * A small helper function that translates linkmode advertisement + * settings to phy autonegotiation advertisements for the MII_ADV + * register for fiber link. */ -static inline u32 ethtool_adv_to_fiber_adv_t(u32 ethadv) +static inline u32 linkmode_adv_to_fiber_adv_t(unsigned long *advertise) { u32 result = 0; - if (ethadv & ADVERTISED_1000baseT_Half) + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertise)) result |= ADVERTISE_FIBER_1000HALF; - if (ethadv & ADVERTISED_1000baseT_Full) + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertise)) result |= ADVERTISE_FIBER_1000FULL; - if ((ethadv & ADVERTISE_PAUSE_ASYM) && (ethadv & ADVERTISE_PAUSE_CAP)) + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertise) && + linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise)) result |= LPA_PAUSE_ASYM_FIBER; - else if (ethadv & ADVERTISE_PAUSE_CAP) + else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise)) result |= (ADVERTISE_PAUSE_FIBER & (~ADVERTISE_PAUSE_ASYM_FIBER)); @@ -530,14 +531,13 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev) int changed = 0; int err; int adv, oldadv; - u32 advertise; if (phydev->autoneg != AUTONEG_ENABLE) return genphy_setup_forced(phydev); /* Only allow advertising what this PHY supports */ - phydev->advertising &= phydev->supported; - advertise = phydev->advertising; + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); /* Setup fiber advertisement */ adv = phy_read(phydev, MII_ADVERTISE); @@ -547,7 +547,7 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev) oldadv = adv; adv &= ~(ADVERTISE_FIBER_1000HALF | ADVERTISE_FIBER_1000FULL | LPA_PAUSE_FIBER); - adv |= ethtool_adv_to_fiber_adv_t(advertise); + adv |= linkmode_adv_to_fiber_adv_t(phydev->advertising); if (adv != oldadv) { err = phy_write(phydev, MII_ADVERTISE, adv); @@ -847,7 +847,6 @@ static int m88e1510_config_init(struct phy_device *phydev) /* SGMII-to-Copper mode initialization */ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { - u32 pause; /* Select page 18 */ err = marvell_set_page(phydev, 18); @@ -878,9 +877,14 @@ static int m88e1510_config_init(struct phy_device *phydev) * This means we can never be truely sure what was advertised, * so disable Pause support. */ - pause = SUPPORTED_Pause | SUPPORTED_Asym_Pause; - phydev->supported &= ~pause; - phydev->advertising &= ~pause; + linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->supported); + linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->supported); + linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising); + linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->advertising); } return m88e1318_config_init(phydev); @@ -1042,23 +1046,55 @@ static int m88e1145_config_init(struct phy_device *phydev) return 0; } +/* The VOD can be out of specification on link up. Poke an + * undocumented register, in an undocumented page, with a magic value + * to fix this. + */ +static int m88e6390_errata(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, + BMCR_ANENABLE | BMCR_SPEED1000 | BMCR_FULLDPLX); + if (err) + return err; + + usleep_range(300, 400); + + err = phy_write_paged(phydev, 0xf8, 0x08, 0x36); + if (err) + return err; + + return genphy_soft_reset(phydev); +} + +static int m88e6390_config_aneg(struct phy_device *phydev) +{ + int err; + + err = m88e6390_errata(phydev); + if (err) + return err; + + return m88e1510_config_aneg(phydev); +} + /** - * fiber_lpa_to_ethtool_lpa_t + * fiber_lpa_mod_linkmode_lpa_t + * @advertising: the linkmode advertisement settings * @lpa: value of the MII_LPA register for fiber link * - * A small helper function that translates MII_LPA - * bits to ethtool LP advertisement settings. + * A small helper function that translates MII_LPA bits to linkmode LP + * advertisement settings. Other bits in advertising are left + * unchanged. */ -static u32 fiber_lpa_to_ethtool_lpa_t(u32 lpa) +static void fiber_lpa_mod_linkmode_lpa_t(unsigned long *advertising, u32 lpa) { - u32 result = 0; + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, + advertising, lpa & LPA_FIBER_1000HALF); - if (lpa & LPA_FIBER_1000HALF) - result |= ADVERTISED_1000baseT_Half; - if (lpa & LPA_FIBER_1000FULL) - result |= ADVERTISED_1000baseT_Full; - - return result; + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + advertising, lpa & LPA_FIBER_1000FULL); } /** @@ -1134,9 +1170,8 @@ static int marvell_read_status_page_an(struct phy_device *phydev, } if (!fiber) { - phydev->lp_advertising = - mii_stat1000_to_ethtool_lpa_t(lpagb) | - mii_lpa_to_ethtool_lpa_t(lpa); + mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa); + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, lpagb); if (phydev->duplex == DUPLEX_FULL) { phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; @@ -1144,7 +1179,7 @@ static int marvell_read_status_page_an(struct phy_device *phydev, } } else { /* The fiber link is only 1000M capable */ - phydev->lp_advertising = fiber_lpa_to_ethtool_lpa_t(lpa); + fiber_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); if (phydev->duplex == DUPLEX_FULL) { if (!(lpa & LPA_PAUSE_FIBER)) { @@ -1183,7 +1218,7 @@ static int marvell_read_status_page_fixed(struct phy_device *phydev) phydev->pause = 0; phydev->asym_pause = 0; - phydev->lp_advertising = 0; + linkmode_zero(phydev->lp_advertising); return 0; } @@ -1235,7 +1270,8 @@ static int marvell_read_status(struct phy_device *phydev) int err; /* Check the fiber mode first */ - if (phydev->supported & SUPPORTED_FIBRE && + if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, + phydev->supported) && phydev->interface != PHY_INTERFACE_MODE_SGMII) { err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE); if (err < 0) @@ -1278,7 +1314,8 @@ static int marvell_suspend(struct phy_device *phydev) int err; /* Suspend the fiber mode first */ - if (!(phydev->supported & SUPPORTED_FIBRE)) { + if (!linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, + phydev->supported)) { err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE); if (err < 0) goto error; @@ -1312,7 +1349,8 @@ static int marvell_resume(struct phy_device *phydev) int err; /* Resume the fiber mode first */ - if (!(phydev->supported & SUPPORTED_FIBRE)) { + if (!linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, + phydev->supported)) { err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE); if (err < 0) goto error; @@ -1397,7 +1435,7 @@ static int m88e1318_set_wol(struct phy_device *phydev, * before enabling it if !phy_interrupt_is_valid() */ if (!phy_interrupt_is_valid(phydev)) - phy_read(phydev, MII_M1011_IEVENT); + __phy_read(phydev, MII_M1011_IEVENT); /* Enable the WOL interrupt */ err = __phy_modify(phydev, MII_88E1318S_PHY_CSIER, 0, @@ -1463,7 +1501,8 @@ error: static int marvell_get_sset_count(struct phy_device *phydev) { - if (phydev->supported & SUPPORTED_FIBRE) + if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, + phydev->supported)) return ARRAY_SIZE(marvell_hw_stats); else return ARRAY_SIZE(marvell_hw_stats) - NB_FIBER_STATS; @@ -2005,7 +2044,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1101", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1101_config_aneg, @@ -2024,7 +2062,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1112", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, @@ -2043,7 +2080,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1111", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, @@ -2063,7 +2099,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1118", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1118_config_init, .config_aneg = &m88e1118_config_aneg, @@ -2082,7 +2117,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1121R", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = &m88e1121_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1121_config_aneg, @@ -2103,7 +2137,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1318S", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1318_config_init, .config_aneg = &m88e1318_config_aneg, @@ -2126,7 +2159,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1145", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1145_config_init, .config_aneg = &m88e1101_config_aneg, @@ -2146,7 +2178,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1149R", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1149_config_init, .config_aneg = &m88e1118_config_aneg, @@ -2165,7 +2196,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1240", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1111_config_init, .config_aneg = &marvell_config_aneg, @@ -2184,7 +2214,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1116R", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e1116r_config_init, .ack_interrupt = &marvell_ack_interrupt, @@ -2202,7 +2231,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1510", .features = PHY_GBIT_FIBRE_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = &m88e1510_probe, .config_init = &m88e1510_config_init, .config_aneg = &m88e1510_config_aneg, @@ -2226,7 +2254,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E1540", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = m88e1510_probe, .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, @@ -2248,7 +2275,6 @@ static struct phy_driver marvell_drivers[] = { .name = "Marvell 88E1545", .probe = m88e1510_probe, .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .config_init = &marvell_config_init, .config_aneg = &m88e1510_config_aneg, .read_status = &marvell_read_status, @@ -2268,7 +2294,6 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E3016", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &m88e3016_config_init, .aneg_done = &marvell_aneg_done, @@ -2289,10 +2314,9 @@ static struct phy_driver marvell_drivers[] = { .phy_id_mask = MARVELL_PHY_ID_MASK, .name = "Marvell 88E6390", .features = PHY_GBIT_FEATURES, - .flags = PHY_HAS_INTERRUPT, .probe = m88e6390_probe, .config_init = &marvell_config_init, - .config_aneg = &m88e1510_config_aneg, + .config_aneg = &m88e6390_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr, |
